From: Arnd Bergmann <arnd@arndb.de> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Felipe Balbi <balbi@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, linus.walleij@linaro.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Date: Thu, 10 Oct 2019 22:29:48 +0200 [thread overview] Message-ID: <20191010203043.1241612-4-arnd@arndb.de> (raw) In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de> There is no real phy driver, so s3c-hsudc just pokes the registers itself. Improve this a little by making it a platform data callback like we do for gpios. There is only one board using this driver, and it's unlikely that another would be added, so this is a minimal workaround. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- .../include/mach/regs-s3c2443-clock.h | 49 +++++++++++++++++ arch/arm/plat-samsung/devs.c | 3 + drivers/usb/gadget/udc/s3c-hsudc.c | 55 ++----------------- include/linux/platform_data/s3c-hsudc.h | 2 + 4 files changed, 58 insertions(+), 51 deletions(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index 6bf924612b06..682759549e63 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_REGS_S3C2443_CLOCK #define __ASM_ARM_REGS_S3C2443_CLOCK +#include <linux/delay.h> + #define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) #define S3C2443_PLLCON_MDIVSHIFT 16 @@ -184,5 +186,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) return (unsigned int)fvco; } +static inline void s3c_hsudc_init_phy(void) +{ + u32 cfg; + + cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; + writel(cfg, S3C2443_PWRCFG); + + cfg = readl(S3C2443_URSTCON); + cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); + writel(cfg, S3C2443_URSTCON); + mdelay(1); + + cfg = readl(S3C2443_URSTCON); + cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); + writel(cfg, S3C2443_URSTCON); + + cfg = readl(S3C2443_PHYCTRL); + cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); + cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); + writel(cfg, S3C2443_PHYCTRL); + + cfg = readl(S3C2443_PHYPWR); + cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | + S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | + S3C2443_PHYPWR_ANALOG_PD); + cfg |= S3C2443_PHYPWR_COMMON_ON; + writel(cfg, S3C2443_PHYPWR); + + cfg = readl(S3C2443_UCLKCON); + cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | + S3C2443_UCLKCON_TCLKEN); + writel(cfg, S3C2443_UCLKCON); +} + +static inline void s3c_hsudc_uninit_phy(void) +{ + u32 cfg; + + cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; + writel(cfg, S3C2443_PWRCFG); + + writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); + + cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; + writel(cfg, S3C2443_UCLKCON); +} + #endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d1fa068d228..6e4c1cb07104 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -40,6 +40,7 @@ #include <mach/dma.h> #include <mach/irqs.h> #include <mach/map.h> +#include <mach/regs-s3c2443-clock.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -1038,6 +1039,8 @@ struct platform_device s3c_device_usb_hsudc = { void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) { s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); + pd->phy_init = s3c_hsudc_init_phy; + pd->phy_uninit = s3c_hsudc_uninit_phy; } #endif /* CONFIG_PLAT_S3C24XX */ diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index 858993c73442..d482cbb4bb4d 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -30,8 +30,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> -#include <mach/regs-s3c2443-clock.h> - #define S3C_HSUDC_REG(x) (x) /* Non-Indexed Registers */ @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val) writel(readl(ptr) | val, ptr); } -static void s3c_hsudc_init_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - cfg = readl(S3C2443_URSTCON); - cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - mdelay(1); - - cfg = readl(S3C2443_URSTCON); - cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - - cfg = readl(S3C2443_PHYCTRL); - cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); - cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); - writel(cfg, S3C2443_PHYCTRL); - - cfg = readl(S3C2443_PHYPWR); - cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | - S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | - S3C2443_PHYPWR_ANALOG_PD); - cfg |= S3C2443_PHYPWR_COMMON_ON; - writel(cfg, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON); - cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | - S3C2443_UCLKCON_TCLKEN); - writel(cfg, S3C2443_UCLKCON); -} - -static void s3c_hsudc_uninit_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; - writel(cfg, S3C2443_UCLKCON); -} - /** * s3c_hsudc_complete_request - Complete a transfer request. * @hsep: Endpoint to which the request belongs. @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, pm_runtime_get_sync(hsudc->dev); - s3c_hsudc_init_phy(); + if (hsudc->pd->phy_init) + hsudc->pd->gpio_init(); if (hsudc->pd->gpio_init) hsudc->pd->gpio_init(); @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsudc->lock, flags); hsudc->gadget.speed = USB_SPEED_UNKNOWN; - s3c_hsudc_uninit_phy(); + if (hsudc->pd->phy_uninit) + hsudc->pd->phy_uninit(); pm_runtime_put(hsudc->dev); diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h index 4dc9b8760166..a170939832d5 100644 --- a/include/linux/platform_data/s3c-hsudc.h +++ b/include/linux/platform_data/s3c-hsudc.h @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata { unsigned int epnum; void (*gpio_init)(void); void (*gpio_uninit)(void); + void (*phy_init)(void); + void (*phy_uninit)(void); }; #endif /* __LINUX_USB_S3C_HSUDC_H */ -- 2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Felipe Balbi <balbi@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org, Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Date: Thu, 10 Oct 2019 22:29:48 +0200 [thread overview] Message-ID: <20191010203043.1241612-4-arnd@arndb.de> (raw) Message-ID: <20191010202948.yp97e3E5yfvwKf93aD8pai5-i5FUsKzS0jy1JAbPy3I@z> (raw) In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de> There is no real phy driver, so s3c-hsudc just pokes the registers itself. Improve this a little by making it a platform data callback like we do for gpios. There is only one board using this driver, and it's unlikely that another would be added, so this is a minimal workaround. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- .../include/mach/regs-s3c2443-clock.h | 49 +++++++++++++++++ arch/arm/plat-samsung/devs.c | 3 + drivers/usb/gadget/udc/s3c-hsudc.c | 55 ++----------------- include/linux/platform_data/s3c-hsudc.h | 2 + 4 files changed, 58 insertions(+), 51 deletions(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index 6bf924612b06..682759549e63 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_REGS_S3C2443_CLOCK #define __ASM_ARM_REGS_S3C2443_CLOCK +#include <linux/delay.h> + #define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) #define S3C2443_PLLCON_MDIVSHIFT 16 @@ -184,5 +186,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) return (unsigned int)fvco; } +static inline void s3c_hsudc_init_phy(void) +{ + u32 cfg; + + cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; + writel(cfg, S3C2443_PWRCFG); + + cfg = readl(S3C2443_URSTCON); + cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); + writel(cfg, S3C2443_URSTCON); + mdelay(1); + + cfg = readl(S3C2443_URSTCON); + cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); + writel(cfg, S3C2443_URSTCON); + + cfg = readl(S3C2443_PHYCTRL); + cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); + cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); + writel(cfg, S3C2443_PHYCTRL); + + cfg = readl(S3C2443_PHYPWR); + cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | + S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | + S3C2443_PHYPWR_ANALOG_PD); + cfg |= S3C2443_PHYPWR_COMMON_ON; + writel(cfg, S3C2443_PHYPWR); + + cfg = readl(S3C2443_UCLKCON); + cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | + S3C2443_UCLKCON_TCLKEN); + writel(cfg, S3C2443_UCLKCON); +} + +static inline void s3c_hsudc_uninit_phy(void) +{ + u32 cfg; + + cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; + writel(cfg, S3C2443_PWRCFG); + + writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); + + cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; + writel(cfg, S3C2443_UCLKCON); +} + #endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d1fa068d228..6e4c1cb07104 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -40,6 +40,7 @@ #include <mach/dma.h> #include <mach/irqs.h> #include <mach/map.h> +#include <mach/regs-s3c2443-clock.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -1038,6 +1039,8 @@ struct platform_device s3c_device_usb_hsudc = { void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) { s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); + pd->phy_init = s3c_hsudc_init_phy; + pd->phy_uninit = s3c_hsudc_uninit_phy; } #endif /* CONFIG_PLAT_S3C24XX */ diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index 858993c73442..d482cbb4bb4d 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -30,8 +30,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> -#include <mach/regs-s3c2443-clock.h> - #define S3C_HSUDC_REG(x) (x) /* Non-Indexed Registers */ @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val) writel(readl(ptr) | val, ptr); } -static void s3c_hsudc_init_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - cfg = readl(S3C2443_URSTCON); - cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - mdelay(1); - - cfg = readl(S3C2443_URSTCON); - cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST); - writel(cfg, S3C2443_URSTCON); - - cfg = readl(S3C2443_PHYCTRL); - cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT); - cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL); - writel(cfg, S3C2443_PHYCTRL); - - cfg = readl(S3C2443_PHYPWR); - cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN | - S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK | - S3C2443_PHYPWR_ANALOG_PD); - cfg |= S3C2443_PHYPWR_COMMON_ON; - writel(cfg, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON); - cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN | - S3C2443_UCLKCON_TCLKEN); - writel(cfg, S3C2443_UCLKCON); -} - -static void s3c_hsudc_uninit_phy(void) -{ - u32 cfg; - - cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY; - writel(cfg, S3C2443_PWRCFG); - - writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR); - - cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN; - writel(cfg, S3C2443_UCLKCON); -} - /** * s3c_hsudc_complete_request - Complete a transfer request. * @hsep: Endpoint to which the request belongs. @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, pm_runtime_get_sync(hsudc->dev); - s3c_hsudc_init_phy(); + if (hsudc->pd->phy_init) + hsudc->pd->gpio_init(); if (hsudc->pd->gpio_init) hsudc->pd->gpio_init(); @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsudc->lock, flags); hsudc->gadget.speed = USB_SPEED_UNKNOWN; - s3c_hsudc_uninit_phy(); + if (hsudc->pd->phy_uninit) + hsudc->pd->phy_uninit(); pm_runtime_put(hsudc->dev); diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h index 4dc9b8760166..a170939832d5 100644 --- a/include/linux/platform_data/s3c-hsudc.h +++ b/include/linux/platform_data/s3c-hsudc.h @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata { unsigned int epnum; void (*gpio_init)(void); void (*gpio_uninit)(void); + void (*phy_init)(void); + void (*phy_uninit)(void); }; #endif /* __LINUX_USB_S3C_HSUDC_H */ -- 2.20.0
next prev parent reply other threads:[~2019-10-10 20:29 UTC|newest] Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann 2019-10-10 20:28 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 02/36] ARM: s3c: simplify mach/io.h Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 03/36] usb: gadget: s3c: use platform resources Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:06 ` Krzysztof Kozlowski 2019-10-23 12:46 ` Krzysztof Kozlowski 2019-10-23 13:26 ` Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann [this message] 2019-10-10 20:29 ` [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Arnd Bergmann 2019-10-23 10:09 ` Krzysztof Kozlowski 2019-10-23 12:21 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 05/36] ARM: samsung: make pm-debug platform independent Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:27 ` Krzysztof Kozlowski 2019-10-23 12:13 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 06/36] ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:12 ` Krzysztof Kozlowski 2019-10-23 12:22 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 07/36] ARM: exynos: use private samsung_cpu_id copy Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:54 ` Krzysztof Kozlowski 2019-10-23 12:37 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 08/36] ARM: exynos: stop selecting PLAT_SAMSUNG Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-15 14:12 ` Ulf Hansson 2019-10-23 10:57 ` Krzysztof Kozlowski 2019-10-23 12:43 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 09/36] ARM: samsung: move pm check code to drivers/soc Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 11:32 ` Krzysztof Kozlowski 2019-10-23 12:45 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 10/36] ARM: s5pv210: use private pm save/restore Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 11:55 ` Krzysztof Kozlowski 2019-10-23 13:12 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-11 5:51 ` Uwe Kleine-König 2019-10-11 5:51 ` Uwe Kleine-König 2019-10-22 14:01 ` Arnd Bergmann 2019-10-22 15:53 ` Uwe Kleine-König 2019-10-22 16:20 ` Arnd Bergmann 2019-10-15 14:13 ` Ulf Hansson 2019-10-15 14:23 ` Thierry Reding 2019-10-23 12:14 ` Krzysztof Kozlowski 2019-10-23 13:17 ` Arnd Bergmann 2019-10-23 14:12 ` Krzysztof Kozlowski 2019-10-10 20:29 ` [PATCH 12/36] ARM: s3c64xx: remove mach/hardware.h Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-16 10:09 ` Charles Keepax 2019-10-10 20:29 ` [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 12:32 ` Krzysztof Kozlowski 2019-10-23 13:21 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 14/36] ARM: s3c: move irqchip driver back into platform Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 15/36] ARM: s3c: adc: move header to linux/soc/samsung Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 22:20 ` Guenter Roeck 2019-10-10 22:20 ` Guenter Roeck 2019-10-10 22:29 ` Dmitry Torokhov 2019-10-10 22:29 ` Dmitry Torokhov 2019-10-10 22:44 ` Sebastian Reichel 2019-10-10 22:44 ` Sebastian Reichel 2019-10-23 12:37 ` Krzysztof Kozlowski 2019-10-23 13:23 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 16/36] ARM: s3c: move spi fiq handler into platform Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 17/36] ARM: s3c: h1940-audio: turn into platform driver Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 18/36] ARM: s3c: gta02-audio: " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 19/36] ARM: s3c: rx1950: " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 20/36] ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-11 10:50 ` Mark Brown 2019-10-11 10:50 ` Mark Brown 2019-10-10 20:30 ` [PATCH 21/36] ARM: s3c: move iis pinctrl config into boards Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 12:50 ` Krzysztof Kozlowski 2019-10-23 13:29 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 23/36] ARM: s3c: move s3cmci pinctrl handling " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-15 14:12 ` Ulf Hansson 2019-10-16 13:12 ` Linus Walleij 2019-10-10 20:30 ` [PATCH 24/36] ARM: s3c: include mach/irqs.h where needed Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 25/36] ARM: s3c: spi: avoid hardcoding fiq number in driver Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 26/36] ARM: s3c: bast: avoid irq_desc array usage Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 27/36] ARM: s3c: fix mmc gpio lookup tables Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 28/36] fbdev: s3c2410fb: remove mach header dependency Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:13 ` Krzysztof Kozlowski 2019-10-23 13:35 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 29/36] ARM: s3c: cpufreq: split out registers Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 30/36] ARM: s3c: remove cpufreq header dependencies Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:38 ` Krzysztof Kozlowski 2019-10-23 13:46 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 31/36] ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:44 ` Krzysztof Kozlowski 2019-10-23 13:57 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 32/36] ARM: s3c: iotiming: make functions static Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:49 ` Krzysztof Kozlowski 2019-10-23 13:54 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 21:02 ` Russell King - ARM Linux admin 2019-10-10 21:02 ` Russell King - ARM Linux admin 2019-10-10 21:53 ` Arnd Bergmann 2019-10-10 21:53 ` Arnd Bergmann 2019-10-15 14:52 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Tomasz Figa 2019-10-10 21:07 ` [PATCH 35/36] ARM: s3c: move into a common directory Arnd Bergmann 2019-10-10 21:07 ` Arnd Bergmann 2019-10-23 14:05 ` Krzysztof Kozlowski 2019-10-10 21:07 ` [PATCH 36/36] ARM: s3c: make headers local if possible Arnd Bergmann 2019-10-10 21:07 ` Arnd Bergmann 2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski 2019-10-23 13:39 ` Arnd Bergmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191010203043.1241612-4-arnd@arndb.de \ --to=arnd@arndb.de \ --cc=balbi@kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).