From: Arnd Bergmann <arnd@arndb.de> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, "Rafael J. Wysocki" <rjw@rjwysocki.net>, Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, linux-pm@vger.kernel.org, linus.walleij@linaro.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Date: Thu, 10 Oct 2019 22:30:17 +0200 [thread overview] Message-ID: <20191010203043.1241612-33-arnd@arndb.de> (raw) In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de> Rather than have the cpufreq drivers touch include the common headers to get the constants, add a small indirection. This is still not the proper way that would do this through the common clk API, but it lets us kill off the header file usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-s3c24xx/Makefile | 2 +- arch/arm/mach-s3c24xx/cpufreq-utils.c | 32 ++++++++++++++++++++ drivers/cpufreq/s3c2410-cpufreq.c | 8 +---- drivers/cpufreq/s3c2412-cpufreq.c | 10 ++---- drivers/cpufreq/s3c2440-cpufreq.c | 16 +++------- drivers/cpufreq/s3c24xx-cpufreq.c | 11 ++----- include/linux/soc/samsung/s3c-cpufreq-core.h | 7 +++++ 7 files changed, 51 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 695573df00b1..195a4cb23ecb 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -38,7 +38,7 @@ obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 43ab714eaa9e..75c197d59a75 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -60,3 +60,35 @@ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) if (!IS_ERR(cfg->mpll)) clk_set_rate(cfg->mpll, cfg->pll.frequency); } + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +u32 s3c2440_read_camdivn() +{ + return __raw_readl(S3C2440_CAMDIVN); +} + +void s3c2440_write_camdivn(u32 camdiv) +{ + __raw_writel(camdiv, S3C2440_CAMDIVN); +} +#endif + +u32 s3c24xx_read_clkdivn() +{ + return __raw_readl(S3C2410_CLKDIVN); +} + +void s3c24xx_write_clkdivn(u32 clkdiv) +{ + __raw_writel(clkdiv, S3C2410_CLKDIVN); +} + +u32 s3c24xx_read_mpllcon() +{ + return __raw_readl(S3C2410_MPLLCON); +} + +void s3c24xx_write_locktime(u32 locktime) +{ + return __raw_writel(locktime, S3C2410_LOCKTIME); +} diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c index 9c2f29cacdd0..5dcfbf0bfb74 100644 --- a/drivers/cpufreq/s3c2410-cpufreq.c +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -22,12 +22,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) @@ -43,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) if (cfg->divs.p_divisor != cfg->divs.h_divisor) clkdiv |= S3C2410_CLKDIVN_PDIVN; - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); } static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index a77c63e92e1a..5945945ead7c 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -25,12 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) #define S3C2412_CLKDIVN_ARMDIVN (1<<3) @@ -132,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) unsigned long clkdiv; unsigned long olddiv; - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + olddiv = clkdiv = s3c24xx_read_clkdivn(); /* clear off current clock info */ @@ -149,7 +143,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) clkdiv |= S3C2412_CLKDIVN_PDIVN; s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 442abdccb9c1..148e8aedefa9 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -26,12 +26,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - #define S3C2440_CLKDIVN_PDIVN (1<<0) #define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) #define S3C2440_CLKDIVN_HDIVN_1 (0<<1) @@ -162,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, cfg->divs.h_divisor, cfg->divs.p_divisor); - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); + clkdiv = s3c24xx_read_clkdivn(); + camdiv = s3c2440_read_camdivn(); clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); camdiv &= ~CAMDIVN_HCLK_HALF; @@ -203,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) * then make a short delay and remove the hclk halving if necessary. */ - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); + s3c24xx_write_clkdivn(clkdiv); ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); + s3c2440_write_camdivn(camdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 01b1823ea208..37efc0dc3f91 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -27,12 +27,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - /* note, cpufreq support deals in kHz, no Hz */ -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) - static struct cpufreq_driver s3c24xx_driver; static struct s3c_cpufreq_config cpu_cur; static struct s3c_iotimings s3c24xx_iotiming; @@ -69,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = s3c24xx_read_mpllcon(); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -387,7 +382,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = s3c24xx_read_mpllcon(); suspend_freq = clk_get_rate(clk_arm); return 0; @@ -548,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void) val |= calc_locktime(rate, cpu_cur.info->locktime_m); pr_info("%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); + s3c24xx_write_locktime(val); } static int s3c_cpufreq_build_freq(void) diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index eca942559014..eaee883008a8 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -286,3 +286,10 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, return index + 1; } + +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); -- 2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, "Rafael J. Wysocki" <rjw@rjwysocki.net>, Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org, Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org Subject: [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Date: Thu, 10 Oct 2019 22:30:17 +0200 [thread overview] Message-ID: <20191010203043.1241612-33-arnd@arndb.de> (raw) Message-ID: <20191010203017.FQDH1Z_1SU3ENlTqzo-ld-UavMqLxi_SGxNxvx-9oOg@z> (raw) In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de> Rather than have the cpufreq drivers touch include the common headers to get the constants, add a small indirection. This is still not the proper way that would do this through the common clk API, but it lets us kill off the header file usage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-s3c24xx/Makefile | 2 +- arch/arm/mach-s3c24xx/cpufreq-utils.c | 32 ++++++++++++++++++++ drivers/cpufreq/s3c2410-cpufreq.c | 8 +---- drivers/cpufreq/s3c2412-cpufreq.c | 10 ++---- drivers/cpufreq/s3c2440-cpufreq.c | 16 +++------- drivers/cpufreq/s3c24xx-cpufreq.c | 11 ++----- include/linux/soc/samsung/s3c-cpufreq-core.h | 7 +++++ 7 files changed, 51 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 695573df00b1..195a4cb23ecb 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -38,7 +38,7 @@ obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 43ab714eaa9e..75c197d59a75 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -60,3 +60,35 @@ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) if (!IS_ERR(cfg->mpll)) clk_set_rate(cfg->mpll, cfg->pll.frequency); } + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +u32 s3c2440_read_camdivn() +{ + return __raw_readl(S3C2440_CAMDIVN); +} + +void s3c2440_write_camdivn(u32 camdiv) +{ + __raw_writel(camdiv, S3C2440_CAMDIVN); +} +#endif + +u32 s3c24xx_read_clkdivn() +{ + return __raw_readl(S3C2410_CLKDIVN); +} + +void s3c24xx_write_clkdivn(u32 clkdiv) +{ + __raw_writel(clkdiv, S3C2410_CLKDIVN); +} + +u32 s3c24xx_read_mpllcon() +{ + return __raw_readl(S3C2410_MPLLCON); +} + +void s3c24xx_write_locktime(u32 locktime) +{ + return __raw_writel(locktime, S3C2410_LOCKTIME); +} diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c index 9c2f29cacdd0..5dcfbf0bfb74 100644 --- a/drivers/cpufreq/s3c2410-cpufreq.c +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -22,12 +22,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) @@ -43,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) if (cfg->divs.p_divisor != cfg->divs.h_divisor) clkdiv |= S3C2410_CLKDIVN_PDIVN; - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); } static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index a77c63e92e1a..5945945ead7c 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -25,12 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) #define S3C2412_CLKDIVN_ARMDIVN (1<<3) @@ -132,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) unsigned long clkdiv; unsigned long olddiv; - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + olddiv = clkdiv = s3c24xx_read_clkdivn(); /* clear off current clock info */ @@ -149,7 +143,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) clkdiv |= S3C2412_CLKDIVN_PDIVN; s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 442abdccb9c1..148e8aedefa9 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -26,12 +26,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - #define S3C2440_CLKDIVN_PDIVN (1<<0) #define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) #define S3C2440_CLKDIVN_HDIVN_1 (0<<1) @@ -162,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, cfg->divs.h_divisor, cfg->divs.p_divisor); - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); + clkdiv = s3c24xx_read_clkdivn(); + camdiv = s3c2440_read_camdivn(); clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); camdiv &= ~CAMDIVN_HCLK_HALF; @@ -203,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) * then make a short delay and remove the hclk halving if necessary. */ - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); + s3c24xx_write_clkdivn(clkdiv); ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); + s3c2440_write_camdivn(camdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 01b1823ea208..37efc0dc3f91 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -27,12 +27,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/map.h> - /* note, cpufreq support deals in kHz, no Hz */ -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) - static struct cpufreq_driver s3c24xx_driver; static struct s3c_cpufreq_config cpu_cur; static struct s3c_iotimings s3c24xx_iotiming; @@ -69,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = s3c24xx_read_mpllcon(); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -387,7 +382,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = s3c24xx_read_mpllcon(); suspend_freq = clk_get_rate(clk_arm); return 0; @@ -548,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void) val |= calc_locktime(rate, cpu_cur.info->locktime_m); pr_info("%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); + s3c24xx_write_locktime(val); } static int s3c_cpufreq_build_freq(void) diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index eca942559014..eaee883008a8 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -286,3 +286,10 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, return index + 1; } + +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); -- 2.20.0
next prev parent reply other threads:[~2019-10-10 20:30 UTC|newest] Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann 2019-10-10 20:28 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 02/36] ARM: s3c: simplify mach/io.h Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 03/36] usb: gadget: s3c: use platform resources Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:06 ` Krzysztof Kozlowski 2019-10-23 12:46 ` Krzysztof Kozlowski 2019-10-23 13:26 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:09 ` Krzysztof Kozlowski 2019-10-23 12:21 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 05/36] ARM: samsung: make pm-debug platform independent Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:27 ` Krzysztof Kozlowski 2019-10-23 12:13 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 06/36] ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:12 ` Krzysztof Kozlowski 2019-10-23 12:22 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 07/36] ARM: exynos: use private samsung_cpu_id copy Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 10:54 ` Krzysztof Kozlowski 2019-10-23 12:37 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 08/36] ARM: exynos: stop selecting PLAT_SAMSUNG Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-15 14:12 ` Ulf Hansson 2019-10-23 10:57 ` Krzysztof Kozlowski 2019-10-23 12:43 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 09/36] ARM: samsung: move pm check code to drivers/soc Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 11:32 ` Krzysztof Kozlowski 2019-10-23 12:45 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 10/36] ARM: s5pv210: use private pm save/restore Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 11:55 ` Krzysztof Kozlowski 2019-10-23 13:12 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-11 5:51 ` Uwe Kleine-König 2019-10-11 5:51 ` Uwe Kleine-König 2019-10-22 14:01 ` Arnd Bergmann 2019-10-22 15:53 ` Uwe Kleine-König 2019-10-22 16:20 ` Arnd Bergmann 2019-10-15 14:13 ` Ulf Hansson 2019-10-15 14:23 ` Thierry Reding 2019-10-23 12:14 ` Krzysztof Kozlowski 2019-10-23 13:17 ` Arnd Bergmann 2019-10-23 14:12 ` Krzysztof Kozlowski 2019-10-10 20:29 ` [PATCH 12/36] ARM: s3c64xx: remove mach/hardware.h Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-16 10:09 ` Charles Keepax 2019-10-10 20:29 ` [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-23 12:32 ` Krzysztof Kozlowski 2019-10-23 13:21 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 14/36] ARM: s3c: move irqchip driver back into platform Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 20:29 ` [PATCH 15/36] ARM: s3c: adc: move header to linux/soc/samsung Arnd Bergmann 2019-10-10 20:29 ` Arnd Bergmann 2019-10-10 22:20 ` Guenter Roeck 2019-10-10 22:20 ` Guenter Roeck 2019-10-10 22:29 ` Dmitry Torokhov 2019-10-10 22:29 ` Dmitry Torokhov 2019-10-10 22:44 ` Sebastian Reichel 2019-10-10 22:44 ` Sebastian Reichel 2019-10-23 12:37 ` Krzysztof Kozlowski 2019-10-23 13:23 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 16/36] ARM: s3c: move spi fiq handler into platform Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 17/36] ARM: s3c: h1940-audio: turn into platform driver Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 18/36] ARM: s3c: gta02-audio: " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 19/36] ARM: s3c: rx1950: " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 20/36] ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-11 10:50 ` Mark Brown 2019-10-11 10:50 ` Mark Brown 2019-10-10 20:30 ` [PATCH 21/36] ARM: s3c: move iis pinctrl config into boards Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 12:50 ` Krzysztof Kozlowski 2019-10-23 13:29 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 23/36] ARM: s3c: move s3cmci pinctrl handling " Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-15 14:12 ` Ulf Hansson 2019-10-16 13:12 ` Linus Walleij 2019-10-10 20:30 ` [PATCH 24/36] ARM: s3c: include mach/irqs.h where needed Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 25/36] ARM: s3c: spi: avoid hardcoding fiq number in driver Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 26/36] ARM: s3c: bast: avoid irq_desc array usage Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 27/36] ARM: s3c: fix mmc gpio lookup tables Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 28/36] fbdev: s3c2410fb: remove mach header dependency Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:13 ` Krzysztof Kozlowski 2019-10-23 13:35 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 29/36] ARM: s3c: cpufreq: split out registers Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 30/36] ARM: s3c: remove cpufreq header dependencies Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:38 ` Krzysztof Kozlowski 2019-10-23 13:46 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 31/36] ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-23 13:44 ` Krzysztof Kozlowski 2019-10-23 13:57 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 32/36] ARM: s3c: iotiming: make functions static Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann [this message] 2019-10-10 20:30 ` [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Arnd Bergmann 2019-10-23 13:49 ` Krzysztof Kozlowski 2019-10-23 13:54 ` Arnd Bergmann 2019-10-10 20:30 ` [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h Arnd Bergmann 2019-10-10 20:30 ` Arnd Bergmann 2019-10-10 21:02 ` Russell King - ARM Linux admin 2019-10-10 21:02 ` Russell King - ARM Linux admin 2019-10-10 21:53 ` Arnd Bergmann 2019-10-10 21:53 ` Arnd Bergmann 2019-10-15 14:52 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Tomasz Figa 2019-10-10 21:07 ` [PATCH 35/36] ARM: s3c: move into a common directory Arnd Bergmann 2019-10-10 21:07 ` Arnd Bergmann 2019-10-23 14:05 ` Krzysztof Kozlowski 2019-10-10 21:07 ` [PATCH 36/36] ARM: s3c: make headers local if possible Arnd Bergmann 2019-10-10 21:07 ` Arnd Bergmann 2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski 2019-10-23 13:39 ` Arnd Bergmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191010203043.1241612-33-arnd@arndb.de \ --to=arnd@arndb.de \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=rjw@rjwysocki.net \ --cc=viresh.kumar@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).