Re: [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency

[Krzysztof Kozlowski <krzk@kernel.org>]

On Thu, Oct 10, 2019 at 10:29:48PM +0200, Arnd Bergmann wrote:
> There is no real phy driver, so s3c-hsudc just pokes the registers
> itself. Improve this a little by making it a platform data callback
> like we do for gpios.
> 
> There is only one board using this driver, and it's unlikely
> that another would be added, so this is a minimal workaround.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  .../include/mach/regs-s3c2443-clock.h         | 49 +++++++++++++++++
>  arch/arm/plat-samsung/devs.c                  |  3 +
>  drivers/usb/gadget/udc/s3c-hsudc.c            | 55 ++-----------------
>  include/linux/platform_data/s3c-hsudc.h       |  2 +
>  4 files changed, 58 insertions(+), 51 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
> index 6bf924612b06..682759549e63 100644
> --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
> +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
> @@ -10,6 +10,8 @@
>  #ifndef __ASM_ARM_REGS_S3C2443_CLOCK
>  #define __ASM_ARM_REGS_S3C2443_CLOCK
>  
> +#include <linux/delay.h>
> +
>  #define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
>  
>  #define S3C2443_PLLCON_MDIVSHIFT	16
> @@ -184,5 +186,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
>  	return (unsigned int)fvco;
>  }
>  
> +static inline void s3c_hsudc_init_phy(void)
> +{
> +	u32 cfg;
> +
> +	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
> +	writel(cfg, S3C2443_PWRCFG);
> +
> +	cfg = readl(S3C2443_URSTCON);
> +	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
> +	writel(cfg, S3C2443_URSTCON);
> +	mdelay(1);
> +
> +	cfg = readl(S3C2443_URSTCON);
> +	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
> +	writel(cfg, S3C2443_URSTCON);
> +
> +	cfg = readl(S3C2443_PHYCTRL);
> +	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
> +	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
> +	writel(cfg, S3C2443_PHYCTRL);
> +
> +	cfg = readl(S3C2443_PHYPWR);
> +	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
> +		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
> +		S3C2443_PHYPWR_ANALOG_PD);
> +	cfg |= S3C2443_PHYPWR_COMMON_ON;
> +	writel(cfg, S3C2443_PHYPWR);
> +
> +	cfg = readl(S3C2443_UCLKCON);
> +	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
> +		S3C2443_UCLKCON_TCLKEN);
> +	writel(cfg, S3C2443_UCLKCON);
> +}
> +
> +static inline void s3c_hsudc_uninit_phy(void)
> +{
> +	u32 cfg;
> +
> +	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
> +	writel(cfg, S3C2443_PWRCFG);
> +
> +	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
> +
> +	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
> +	writel(cfg, S3C2443_UCLKCON);
> +}
> +
>  #endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
>  
> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
> index 1d1fa068d228..6e4c1cb07104 100644
> --- a/arch/arm/plat-samsung/devs.c
> +++ b/arch/arm/plat-samsung/devs.c
> @@ -40,6 +40,7 @@
>  #include <mach/dma.h>
>  #include <mach/irqs.h>
>  #include <mach/map.h>
> +#include <mach/regs-s3c2443-clock.h>
>  
>  #include <plat/cpu.h>
>  #include <plat/devs.h>
> @@ -1038,6 +1039,8 @@ struct platform_device s3c_device_usb_hsudc = {
>  void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
>  {
>  	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
> +	pd->phy_init = s3c_hsudc_init_phy;
> +	pd->phy_uninit = s3c_hsudc_uninit_phy;
>  }
>  #endif /* CONFIG_PLAT_S3C24XX */
>  
> diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
> index 858993c73442..d482cbb4bb4d 100644
> --- a/drivers/usb/gadget/udc/s3c-hsudc.c
> +++ b/drivers/usb/gadget/udc/s3c-hsudc.c
> @@ -30,8 +30,6 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/pm_runtime.h>
>  
> -#include <mach/regs-s3c2443-clock.h>
> -
>  #define S3C_HSUDC_REG(x)	(x)
>  
>  /* Non-Indexed Registers */
> @@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)
>  	writel(readl(ptr) | val, ptr);
>  }
>  
> -static void s3c_hsudc_init_phy(void)
> -{
> -	u32 cfg;
> -
> -	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
> -	writel(cfg, S3C2443_PWRCFG);
> -
> -	cfg = readl(S3C2443_URSTCON);
> -	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
> -	writel(cfg, S3C2443_URSTCON);
> -	mdelay(1);
> -
> -	cfg = readl(S3C2443_URSTCON);
> -	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
> -	writel(cfg, S3C2443_URSTCON);
> -
> -	cfg = readl(S3C2443_PHYCTRL);
> -	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
> -	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
> -	writel(cfg, S3C2443_PHYCTRL);
> -
> -	cfg = readl(S3C2443_PHYPWR);
> -	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
> -		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
> -		S3C2443_PHYPWR_ANALOG_PD);
> -	cfg |= S3C2443_PHYPWR_COMMON_ON;
> -	writel(cfg, S3C2443_PHYPWR);
> -
> -	cfg = readl(S3C2443_UCLKCON);
> -	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
> -		S3C2443_UCLKCON_TCLKEN);
> -	writel(cfg, S3C2443_UCLKCON);
> -}
> -
> -static void s3c_hsudc_uninit_phy(void)
> -{
> -	u32 cfg;
> -
> -	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
> -	writel(cfg, S3C2443_PWRCFG);
> -
> -	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
> -
> -	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
> -	writel(cfg, S3C2443_UCLKCON);
> -}
> -
>  /**
>   * s3c_hsudc_complete_request - Complete a transfer request.
>   * @hsep: Endpoint to which the request belongs.
> @@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
>  
>  	pm_runtime_get_sync(hsudc->dev);
>  
> -	s3c_hsudc_init_phy();
> +	if (hsudc->pd->phy_init)
> +		hsudc->pd->gpio_init();

Copy paste error - phy_init().

Are here (and in previous usb gadget patch) any dependencies? If so, I
would need an ack to take it through samsung-soc.

Best regards,
Krzysztof

>  	if (hsudc->pd->gpio_init)
>  		hsudc->pd->gpio_init();
>  
> @@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)
>  
>  	spin_lock_irqsave(&hsudc->lock, flags);
>  	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
> -	s3c_hsudc_uninit_phy();
> +	if (hsudc->pd->phy_uninit)
> +		hsudc->pd->phy_uninit();
>  
>  	pm_runtime_put(hsudc->dev);
>  
> diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
> index 4dc9b8760166..a170939832d5 100644
> --- a/include/linux/platform_data/s3c-hsudc.h
> +++ b/include/linux/platform_data/s3c-hsudc.h
> @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata {
>  	unsigned int	epnum;
>  	void		(*gpio_init)(void);
>  	void		(*gpio_uninit)(void);
> +	void		(*phy_init)(void);
> +	void		(*phy_uninit)(void);
>  };
>  
>  #endif	/* __LINUX_USB_S3C_HSUDC_H */
> -- 
> 2.20.0
>