From: Arnd Bergmann <arnd@arndb.de>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
linux-pm@vger.kernel.org, linus.walleij@linaro.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 29/36] ARM: s3c: cpufreq: split out registers
Date: Thu, 10 Oct 2019 22:30:13 +0200 [thread overview]
Message-ID: <20191010203043.1241612-29-arnd@arndb.de> (raw)
In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de>
Each of the cpufreq drivers uses a fixed set of register
bits, copy those definitions into the drivers to avoid
including mach/regs-clock.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/cpufreq/s3c2410-cpufreq.c | 11 +++++++++--
drivers/cpufreq/s3c2412-cpufreq.c | 20 +++++++++++++++++++-
drivers/cpufreq/s3c2440-cpufreq.c | 24 ++++++++++++++++++++++--
drivers/cpufreq/s3c24xx-cpufreq.c | 4 +++-
4 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
index 0c4f2ccd7e22..5c6cb590b63f 100644
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -20,11 +20,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
+
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index 53385a9ab957..d922d0d47c80 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -23,12 +23,30 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
#include <mach/s3c2412.h>
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
+
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 3f772ba8896e..5fe7a891fa13 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -24,11 +24,31 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
+
static struct clk *xtal;
static struct clk *fclk;
static struct clk *hclk;
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index ed0e713b1b57..c786e1197d3c 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -28,9 +28,11 @@
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
-#include <mach/regs-clock.h>
+#include <mach/map.h>
/* note, cpufreq support deals in kHz, no Hz */
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
static struct cpufreq_driver s3c24xx_driver;
static struct s3c_cpufreq_config cpu_cur;
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
Arnd Bergmann <arnd@arndb.de>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 29/36] ARM: s3c: cpufreq: split out registers
Date: Thu, 10 Oct 2019 22:30:13 +0200 [thread overview]
Message-ID: <20191010203043.1241612-29-arnd@arndb.de> (raw)
Message-ID: <20191010203013.zljdzGW1ZsVPceqGAR-tFnvL1lw8pMp-8ej2gQTJv-Q@z> (raw)
In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de>
Each of the cpufreq drivers uses a fixed set of register
bits, copy those definitions into the drivers to avoid
including mach/regs-clock.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/cpufreq/s3c2410-cpufreq.c | 11 +++++++++--
drivers/cpufreq/s3c2412-cpufreq.c | 20 +++++++++++++++++++-
drivers/cpufreq/s3c2440-cpufreq.c | 24 ++++++++++++++++++++++--
drivers/cpufreq/s3c24xx-cpufreq.c | 4 +++-
4 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
index 0c4f2ccd7e22..5c6cb590b63f 100644
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -20,11 +20,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
+
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index 53385a9ab957..d922d0d47c80 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -23,12 +23,30 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
#include <mach/s3c2412.h>
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
+
/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 3f772ba8896e..5fe7a891fa13 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -24,11 +24,31 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
+#include <mach/map.h>
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
+
static struct clk *xtal;
static struct clk *fclk;
static struct clk *hclk;
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index ed0e713b1b57..c786e1197d3c 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -28,9 +28,11 @@
#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>
-#include <mach/regs-clock.h>
+#include <mach/map.h>
/* note, cpufreq support deals in kHz, no Hz */
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
static struct cpufreq_driver s3c24xx_driver;
static struct s3c_cpufreq_config cpu_cur;
--
2.20.0
next prev parent reply other threads:[~2019-10-10 20:30 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
2019-10-10 20:28 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 02/36] ARM: s3c: simplify mach/io.h Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 03/36] usb: gadget: s3c: use platform resources Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:06 ` Krzysztof Kozlowski
2019-10-23 12:46 ` Krzysztof Kozlowski
2019-10-23 13:26 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:09 ` Krzysztof Kozlowski
2019-10-23 12:21 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 05/36] ARM: samsung: make pm-debug platform independent Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:27 ` Krzysztof Kozlowski
2019-10-23 12:13 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 06/36] ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:12 ` Krzysztof Kozlowski
2019-10-23 12:22 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 07/36] ARM: exynos: use private samsung_cpu_id copy Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:54 ` Krzysztof Kozlowski
2019-10-23 12:37 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 08/36] ARM: exynos: stop selecting PLAT_SAMSUNG Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-15 14:12 ` Ulf Hansson
2019-10-23 10:57 ` Krzysztof Kozlowski
2019-10-23 12:43 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 09/36] ARM: samsung: move pm check code to drivers/soc Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 11:32 ` Krzysztof Kozlowski
2019-10-23 12:45 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 10/36] ARM: s5pv210: use private pm save/restore Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 11:55 ` Krzysztof Kozlowski
2019-10-23 13:12 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-22 14:01 ` Arnd Bergmann
2019-10-22 15:53 ` Uwe Kleine-König
2019-10-22 16:20 ` Arnd Bergmann
2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:23 ` Thierry Reding
2019-10-23 12:14 ` Krzysztof Kozlowski
2019-10-23 13:17 ` Arnd Bergmann
2019-10-23 14:12 ` Krzysztof Kozlowski
2019-10-10 20:29 ` [PATCH 12/36] ARM: s3c64xx: remove mach/hardware.h Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-16 10:09 ` Charles Keepax
2019-10-10 20:29 ` [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 12:32 ` Krzysztof Kozlowski
2019-10-23 13:21 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 14/36] ARM: s3c: move irqchip driver back into platform Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 15/36] ARM: s3c: adc: move header to linux/soc/samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 22:20 ` Guenter Roeck
2019-10-10 22:20 ` Guenter Roeck
2019-10-10 22:29 ` Dmitry Torokhov
2019-10-10 22:29 ` Dmitry Torokhov
2019-10-10 22:44 ` Sebastian Reichel
2019-10-10 22:44 ` Sebastian Reichel
2019-10-23 12:37 ` Krzysztof Kozlowski
2019-10-23 13:23 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 16/36] ARM: s3c: move spi fiq handler into platform Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 17/36] ARM: s3c: h1940-audio: turn into platform driver Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 18/36] ARM: s3c: gta02-audio: " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 19/36] ARM: s3c: rx1950: " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 20/36] ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-11 10:50 ` Mark Brown
2019-10-11 10:50 ` Mark Brown
2019-10-10 20:30 ` [PATCH 21/36] ARM: s3c: move iis pinctrl config into boards Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 12:50 ` Krzysztof Kozlowski
2019-10-23 13:29 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 23/36] ARM: s3c: move s3cmci pinctrl handling " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-15 14:12 ` Ulf Hansson
2019-10-16 13:12 ` Linus Walleij
2019-10-10 20:30 ` [PATCH 24/36] ARM: s3c: include mach/irqs.h where needed Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 25/36] ARM: s3c: spi: avoid hardcoding fiq number in driver Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 26/36] ARM: s3c: bast: avoid irq_desc array usage Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 27/36] ARM: s3c: fix mmc gpio lookup tables Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 28/36] fbdev: s3c2410fb: remove mach header dependency Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:13 ` Krzysztof Kozlowski
2019-10-23 13:35 ` Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann [this message]
2019-10-10 20:30 ` [PATCH 29/36] ARM: s3c: cpufreq: split out registers Arnd Bergmann
2019-10-10 20:30 ` [PATCH 30/36] ARM: s3c: remove cpufreq header dependencies Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:38 ` Krzysztof Kozlowski
2019-10-23 13:46 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 31/36] ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:44 ` Krzysztof Kozlowski
2019-10-23 13:57 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 32/36] ARM: s3c: iotiming: make functions static Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:49 ` Krzysztof Kozlowski
2019-10-23 13:54 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 21:02 ` Russell King - ARM Linux admin
2019-10-10 21:02 ` Russell King - ARM Linux admin
2019-10-10 21:53 ` Arnd Bergmann
2019-10-10 21:53 ` Arnd Bergmann
2019-10-15 14:52 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Tomasz Figa
2019-10-10 21:07 ` [PATCH 35/36] ARM: s3c: move into a common directory Arnd Bergmann
2019-10-10 21:07 ` Arnd Bergmann
2019-10-23 14:05 ` Krzysztof Kozlowski
2019-10-10 21:07 ` [PATCH 36/36] ARM: s3c: make headers local if possible Arnd Bergmann
2019-10-10 21:07 ` Arnd Bergmann
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2019-10-23 13:39 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010203043.1241612-29-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).