messages from 2018-10-28 02:08:41 to 2018-12-12 22:21:42 UTC [more...]
[PATCH v8 00/26] Ingenic TCU patchset v8
2018-12-12 22:15 UTC (27+ messages)
` [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks
` [PATCH v8 02/26] doc: Add doc for the Ingenic TCU hardware
` [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
` [PATCH v8 04/26] clocksource: Add a new timer-ingenic driver
` [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
` [PATCH v8 06/26] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
` [PATCH v8 07/26] watchdog: jz4740: Use WDT clock provided by TCU driver
` [PATCH v8 08/26] watchdog: jz4740: Use regmap "
` [PATCH v8 09/26] watchdog: jz4740: Avoid starting watchdog in set_timeout
` [PATCH v8 10/26] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
` [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver
` [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
` [PATCH v8 13/26] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
` [PATCH v8 14/26] pwm: jz4740: Remove unused devicetree compatible strings
` [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B
` [PATCH v8 16/26] clk: jz4740: Add TCU clock
` [PATCH v8 17/26] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
` [PATCH v8 18/26] MIPS: jz4740: Add DTS nodes for the TCU drivers
` [PATCH v8 19/26] MIPS: qi_lb60: Move PWM devices to devicetree
` [PATCH v8 20/26] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
` [PATCH v8 21/26] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
` [PATCH v8 22/26] MIPS: CI20: defconfig: enable OST driver
` [PATCH v8 23/26] MIPS: GCW0: Move clocksource to TCU channel 2
` [PATCH v8 24/26] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz
` [PATCH v8 25/26] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers
` [PATCH v8 26/26] MIPS: jz4740: Drop obsolete code
[PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
2018-12-11 13:26 UTC (2+ messages)
[PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor
2018-12-11 12:04 UTC
[RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume
2018-12-10 14:49 UTC (15+ messages)
[PATCH v2] watchdog: tqmx86: Add watchdog driver for the IO controller
2018-12-09 20:51 UTC (2+ messages)
[PATCH] Watchdog: remove outdated comment
2018-12-09 14:13 UTC (2+ messages)
[PATCH v3 0/5] BCM2835 PM driver (MFD version respin)
2018-12-09 12:14 UTC (10+ messages)
` [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node
` [PATCH v3 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD
` [PATCH v3 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding
` [PATCH v3 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block
` [PATCH v3 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware
[PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller
2018-12-08 17:16 UTC (3+ messages)
[PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
2018-12-07 12:19 UTC (14+ messages)
` [PATCH v7 1/7] dt-bindings: mfd: document stpmic1
` [PATCH v7 3/7] dt-bindings: input: document stpmic1 pmic onkey
` [PATCH v7 2/7] mfd: stpmic1: add stpmic1 driver
` [PATCH v7 5/7] dt-bindings: watchdog: document stpmic1 pmic watchdog
` [PATCH v7 4/7] input: stpmic1: add stpmic1 onkey driver
` [PATCH v7 6/7] watchdog: stpmic1: add stpmic1 watchdog driver
` [PATCH v7 7/7] regulator: stpmic1: fix regulator_lock usage
[PATCH v2 0/3] watchdog/hpwdt: Do not claim on unsupported hardware
2018-12-06 17:57 UTC (7+ messages)
` [PATCH v2 1/3] watchdog/hpwdt: Exclude via blacklist
` [PATCH v2 2/3] watchdog/hpwdt: Do not claim unsupported hardware
` [PATCH v2 3/3] watchdog/hpwdt: Update driver version
[PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
2018-12-05 12:21 UTC (3+ messages)
[PATCH 1/1] watchdog/hpwdt: Do not claim unsupported hardware
2018-12-05 2:47 UTC (2+ messages)
[PATCH 0/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-04 17:00 UTC (5+ messages)
` [PATCH 1/2] watchdog: bcm281xx: "
` [PATCH 2/2] watchdog: "
[PATCH v2] watchdog: mtx-1: Convert to use GPIO descriptor
2018-12-04 13:02 UTC
x86_64 NMI watchdog false positive, watchdog_overflow_callback fires at random period
2018-12-04 5:09 UTC (2+ messages)
[PATCH v2] watchdog: renesas_wdt: Fix typos
2018-12-03 13:38 UTC (3+ messages)
[PATCH] watchdog: mtx-1: Convert to use GPIO descriptor
2018-12-02 17:27 UTC (2+ messages)
[PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-01 14:57 UTC (3+ messages)
[PATCH v6 0/8] Introduce STPMIC1 PMIC Driver
2018-11-30 8:51 UTC (12+ messages)
` [PATCH v6 1/8] dt-bindings: mfd: document stpmic1
` [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver
` [PATCH v6 4/8] regulator: stpmic1: add stpmic1 regulator driver
` [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
` [PATCH v6 5/8] dt-bindings: input: document stpmic1 pmic onkey
` [PATCH v6 6/8] input: stpmic1: add stpmic1 onkey driver
` [PATCH v6 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
` [PATCH v6 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
[PATCH] watchdog: asm9260_wdt: make array mode_name static, shrinks object size
2018-11-29 23:40 UTC (2+ messages)
[PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
2018-11-29 12:26 UTC (4+ messages)
[PATCH v5 0/8] Introduce STPMIC1 PMIC Driver
2018-11-27 8:57 UTC (17+ messages)
` [PATCH v5 1/8] dt-bindings: mfd: document stpmic1
` [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
` [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators
` [PATCH v5 4/8] regulator: stpmic1: add stpmic1 regulator driver
` [PATCH v5 5/8] dt-bindings: input: document stpmic1 pmic onkey
` [PATCH v5 6/8] input: stpmic1: add stpmic1 onkey driver
` [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver
` [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog
[PATCH] watchdog: core: suppress "watchdog did not stop" message
2018-11-27 6:11 UTC (5+ messages)
[PATCH v3 1/3] watchdog: Add pm8916 watchdog driver
2018-11-27 1:49 UTC (5+ messages)
` [PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
` [PATCH v3 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
[PATCH] kbuild: announce removal of SUBDIRS if used
2018-11-23 10:51 UTC (6+ messages)
[PATCH v2 0/5] BCM2835 PM driver (MFD version)
2018-11-22 20:47 UTC (7+ messages)
` [PATCH v2 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node
` [PATCH v2 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD
` [PATCH v2 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding
` [PATCH v2 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block
` [PATCH v2 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware
[PATCH v2 1/3] watchdog: Add pm8916 watchdog driver
2018-11-22 15:59 UTC (5+ messages)
` [PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
` [PATCH v2 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
[PATCH 0/8] BCM2835 PM driver
2018-11-20 21:39 UTC (13+ messages)
` [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory
` [PATCH 2/8] soc: bcm: bcm2835-pm: Rename the driver to its new "PM" name
` [PATCH 3/8] soc: bcm: bcm2835-pm: Stop using _relaxed mmio accessors
` [PATCH 4/8] soc: bcm: bcm2835-pm: Make some little accessor macros for the mmio area
` [PATCH 5/8] dt-bindings: soc: Add a new binding for the BCM2835 PM node
` [PATCH 6/8] soc: bcm: bcm2835-pm: Add support for power domains under a new binding
` [PATCH 7/8] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block
` [PATCH 8/8] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware
[PATCH v2] watchdog: cpwd: add of_node_put()
2018-11-20 15:00 UTC (2+ messages)
[PATCH] watchdog: cpwd: add of_node_put()
2018-11-20 14:44 UTC (3+ messages)
[PATCH 1/3] watchdog: Add pm8916 watchdog driver
2018-11-19 21:23 UTC (4+ messages)
` [PATCH 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
` [PATCH 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
[PATCH] watchdog: w83627hf_wdt: Add quirk for Inves system
2018-11-19 17:13 UTC (2+ messages)
[PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running
2018-11-07 20:45 UTC (3+ messages)
[PATCH v1] watchdog: npcm: Modify npcm watchdog kconfig arch parameter
2018-11-05 21:19 UTC (2+ messages)
[PATCH] watchdog: renesas_wdt: Fix typos
2018-11-05 10:43 UTC (4+ messages)
[GIT PULL REQUEST] watchdog - v4.20 Merge window
2018-10-27 17:26 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).