linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 00/97] ath9k: add AR9003 support
@ 2010-04-15 21:38 Luis R. Rodriguez
  2010-04-15 21:38 ` [PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
                   ` (96 more replies)
  0 siblings, 97 replies; 103+ messages in thread
From: Luis R. Rodriguez @ 2010-04-15 21:38 UTC (permalink / raw)
  To: linville; +Cc: linux-wireless, Luis R. Rodriguez

This series adds AR9003 support to ath9k, this 3rd series one final
bug Felix found on the the AR_BufLen abstraction on the patch titled
"ath9k_hw: Fill descriptor abstrations for AR9003". Its now fixed
and don't have any other pending issues. Since the patches depend
on some other ones we have no option but to resubmit.

The all-in-one git am'able patch can be found here:

http://bombadil.infradead.org/~mcgrof/patches/ath9k/2010/all-04-15-v1.patch
sha1sum: cf0a362c75acd475de5e33e3400545e3d8f74e63

Felix Fietkau (14):
  ath9k_hw: add silicon revision macros for AR9300
  ath9k_hw: add a macro for abstracting generic timer access
  ath9k_hw: fix a missing hex prefix for a register mask
  ath9k_hw: add simple register abstraction for some AR9300 registers
  ath9k_hw: add support for GPIO differences on AR9003
  ath9k_hw: Add AR9003 PHY register definitions
  ath9k_hw: Set the channel on AR9003
  ath9k_hw: Implement PLL control on AR9003
  ath9k_hw: Implement spur mitigation on AR9003
  ath9k_hw: Split off ANI control to the PHY ops
  ath9k: Add Rx EDMA support
  ath9k_hw: Split out the function for reading the noise floor
  ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c
  ath9k_hw: Update ath9k_hw_set_dma for AR9300

Luis R. Rodriguez (52):
  ath9k_hw: start building an abstraction layer for hardware routines
  ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
  ath9k_hw: remove wrapper ath9k_hw_write_regs()
  ath9k_hw: Move some RF ops to the private callbacks
  ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset
  ath9k_hw: add some comments for ath9k_set_power_network_sleep()
  ath9k_hw: add a private callback for PLL control computation
  ath9k_hw: Add AR9003 PHY support
  ath9k_hw: move init config and default after chip is up
  ath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
  ath9k_hw: disable ANI for AR9003
  ath9k: disable the MIB interrupt if ANI is disabled
  ath9k_hw: add common channel select helpers for ar900[23]
  ath9k_hw: split initvals.h by hardware family
  ath9k_hw: add initvals for the AR9003 hardware family
  ath9k_hw: add helpers for processing the AR9003 INI
  ath9k_hw: add all the AR9003 PHY callbacks
  ath9k_hw: add a helper for Power Amplifier calibration for AR9002
  ath9k_hw: add a helper for the OLC tem compensation for AR9002
  ath9k_hw: rename PA calib for AR9287
  ath9k_hw: shift code for AR9280 OLC temp comp
  ath9k_hw: move the AR9280 OLC temp comp to its own helper
  ath9k_hw: simplify OLC temp compensation for AR9002
  ath9k_hw: rename the PA calib routines to match their families
  ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
  ath9k_hw: move the cal AR9100 calibration settings
  ath9k_hw: split calib code by hardware families
  ath9k_hw: add the AR9003 ar9003_hw_init_cal callback
  ath9k_hw: add the config_pci_powersave AR9003 callback
  ath9k_hw: split the generic hardware code by hardware family
  ath9k_hw: move the cck channel 14 INI to the AR9002 hw code
  ath9k_hw: move TX/RX gain INI stuff to its own hardware family code
  ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
  ath9k_hw: abstract loading noisefloor
  ath9k_hw: fill in the callbacks for calibration for AR9003
  ath9k_hw: complete AR9003 calibration
  ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
  ath9k_hw: restore mac address reading logic
  ath9k_hw: add OFDM spur mitigation for AR9003
  ath9k_hw: move the RF claim stuff to AR9002 hardware family
  ath9k_hw: add the AR9300 SREV hw name print
  ath9k_hw: add TX/RX gain register initialization for AR9003
  ath9k_hw: skip asynch fifo enablement to AR9003
  ath9k_hw: skip WEP aggregation enable code for AR9003
  ath9k_hw: move AR9002 mac ops to its own file
  ath9k: add RXLP and RXHP to debugfs counters
  ath9k_hw: enable CRC check of descriptors for AR9003
  ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset
  mac80211: add LDPC control flag
  ath9k_hw: add LDPC support for AR9003
  ath9k: add LDPC support
  ath9k_hw: add the PCI ID for the first AR9300 device

Senthil Balasubramanian (5):
  ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables
  ath9k_hw: update the chip tests for AR9003
  ath9k_hw: prevent reset control register zeroing on AR9003 reset
  ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup
  ath9k_hw: Implement AR9003 eeprom callbacks

Vasanthakumar Thiagarajan (26):
  ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
  ath9k_hw: Fill few hw cap for edma
  ath9k_hw: Add abstraction for rx enable
  ath9k_hw: Fill rx_enable() for the AR9003 hardware family
  ath9k_hw: Add few routines for rx edma support
  ath9k_hw: Define tx control struct for AR9003
  ath9k_hw: Move code which populates ds_data to ath9k_hw
  ath9k_hw: Add abstraction to set/get link pointer
  ath9k: Use abstraction to get link pointer
  ath9k: Use memcpy in ath_clone_txbuf()
  ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this
    purpose
  ath9k: Make bf_desc of ath_buf opaque
  ath9k_hw: Abstract the routine which returns interrupt status
  ath9k_hw: Initialize interrupt mask for AR9003
  ath9k_hw: Fill get_isr() for AR9003
  ath9k_hw: Configure Tx interrupt mitigation timer
  ath9k: Load SW filtered NF values and start NF cal during full reset
    for AR9003
  ath9k_hw: Define abstraction for tx desc access
  ath9k_hw: Add function to configure tx status ring buffer
  ath9k_hw: Fill descriptor abstrations for AR9003
  ath9k: Setup appropriate tx desc for regular dma and edma
  ath9k: Initialize and configure tx status for EDMA
  ath9k_hw: Compute pointer checksum over the link descriptor
  ath9k: Add Tx EDMA support
  ath9k: Enable TXOK and TXERR interrupts for TX EDMA
  ath9k_hw: Abort rx if hw is not coming out of full sleep in reset

 drivers/net/wireless/ath/ath9k/Makefile            |   16 +-
 drivers/net/wireless/ath/ath9k/ani.c               |  185 +--
 drivers/net/wireless/ath/ath9k/ar5008_initvals.h   |  742 ++++++++
 drivers/net/wireless/ath/ath9k/ar5008_phy.c        | 1347 +++++++++++++
 drivers/net/wireless/ath/ath9k/ar9001_initvals.h   | 1254 +++++++++++++
 drivers/net/wireless/ath/ath9k/ar9002_calib.c      |  995 ++++++++++
 drivers/net/wireless/ath/ath9k/ar9002_hw.c         |  588 ++++++
 .../ath/ath9k/{initvals.h => ar9002_initvals.h}    | 1984 +-------------------
 drivers/net/wireless/ath/ath9k/ar9002_mac.c        |  480 +++++
 drivers/net/wireless/ath/ath9k/ar9002_phy.c        |  534 ++++++
 drivers/net/wireless/ath/ath9k/ar9002_phy.h        |  572 ++++++
 drivers/net/wireless/ath/ath9k/ar9003_calib.c      |  802 ++++++++
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c     | 1856 ++++++++++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h     |  323 ++++
 drivers/net/wireless/ath/ath9k/ar9003_hw.c         |  205 ++
 drivers/net/wireless/ath/ath9k/ar9003_initvals.h   | 1793 ++++++++++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_mac.c        |  611 ++++++
 drivers/net/wireless/ath/ath9k/ar9003_mac.h        |  120 ++
 drivers/net/wireless/ath/ath9k/ar9003_phy.c        | 1142 +++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_phy.h        |  847 +++++++++
 drivers/net/wireless/ath/ath9k/ath9k.h             |   24 +-
 drivers/net/wireless/ath/ath9k/beacon.c            |    5 +-
 drivers/net/wireless/ath/ath9k/calib.c             | 1089 +-----------
 drivers/net/wireless/ath/ath9k/calib.h             |   19 +-
 drivers/net/wireless/ath/ath9k/common.h            |    4 +-
 drivers/net/wireless/ath/ath9k/debug.c             |   22 +-
 drivers/net/wireless/ath/ath9k/debug.h             |    4 +
 drivers/net/wireless/ath/ath9k/eeprom.c            |    9 +-
 drivers/net/wireless/ath/ath9k/eeprom.h            |   22 +-
 drivers/net/wireless/ath/ath9k/eeprom_4k.c         |    7 +-
 drivers/net/wireless/ath/ath9k/eeprom_9287.c       |    9 +-
 drivers/net/wireless/ath/ath9k/eeprom_def.c        |   13 +-
 drivers/net/wireless/ath/ath9k/hw-ops.h            |  280 +++
 drivers/net/wireless/ath/ath9k/hw.c                | 1647 +++--------------
 drivers/net/wireless/ath/ath9k/hw.h                |  234 +++-
 drivers/net/wireless/ath/ath9k/init.c              |   38 +-
 drivers/net/wireless/ath/ath9k/mac.c               |  463 ++---
 drivers/net/wireless/ath/ath9k/mac.h               |   49 +-
 drivers/net/wireless/ath/ath9k/main.c              |   51 +-
 drivers/net/wireless/ath/ath9k/pci.c               |    1 +
 drivers/net/wireless/ath/ath9k/phy.c               |  978 ----------
 drivers/net/wireless/ath/ath9k/phy.h               |  584 +------
 drivers/net/wireless/ath/ath9k/rc.c                |    9 +
 drivers/net/wireless/ath/ath9k/recv.c              |  518 ++++--
 drivers/net/wireless/ath/ath9k/reg.h               |  167 ++-
 drivers/net/wireless/ath/ath9k/xmit.c              |  365 +++-
 include/net/mac80211.h                             |    2 +
 47 files changed, 16166 insertions(+), 6843 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar5008_initvals.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar5008_phy.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9001_initvals.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_calib.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_hw.c
 rename drivers/net/wireless/ath/ath9k/{initvals.h => ar9002_initvals.h} (79%)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_mac.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_phy.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_phy.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_calib.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_hw.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_initvals.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_mac.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_mac.h
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_phy.c
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_phy.h
 create mode 100644 drivers/net/wireless/ath/ath9k/hw-ops.h
 delete mode 100644 drivers/net/wireless/ath/ath9k/phy.c


^ permalink raw reply	[flat|nested] 103+ messages in thread

end of thread, other threads:[~2010-04-19 15:53 UTC | newest]

Thread overview: 103+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-15 21:38 [PATCH v3 00/97] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 02/97] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 03/97] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 04/97] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 06/97] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 08/97] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-16 19:43   ` John W. Linville
2010-04-16 19:56     ` Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 10/97] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 12/97] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 14/97] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 15/97] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 17/97] ath9k_hw: disable ANI for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 18/97] ath9k: disable the MIB interrupt if ANI is disabled Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 20/97] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 21/97] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 23/97] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 24/97] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 26/97] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 27/97] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 28/97] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 29/97] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 30/97] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 31/97] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 32/97] ath9k_hw: add initvals for the AR9003 " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 33/97] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 34/97] ath9k_hw: Split off ANI control to the PHY ops Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 35/97] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 36/97] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 38/97] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 39/97] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 40/97] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-16 22:00   ` Pavel Roskin
2010-04-16 22:09     ` Felix Fietkau
2010-04-19 15:53       ` Pavel Roskin
2010-04-15 21:38 ` [PATCH v3 43/97] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 44/97] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 47/97] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 48/97] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 49/97] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 51/97] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 52/97] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 54/97] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 55/97] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 58/97] ath9k_hw: split the generic hardware code by hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 61/97] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 62/97] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 64/97] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 66/97] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 68/97] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 69/97] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 70/97] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 71/97] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 74/97] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 75/97] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 78/97] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 81/97] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 82/97] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 83/97] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 84/97] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 85/97] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 86/97] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 87/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 88/97] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 89/97] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 90/97] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 91/97] ath9k: Add Tx EDMA support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 92/97] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 93/97] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 94/97] ath9k: add LDPC support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 97/97] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).