* [PATCH V5 Base on RC7 1/3] Add DT bindings documentation for hi6220 SoC reset controller.
@ 2015-10-27 9:51 Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 2/3] Add reset controller for hi6220 SoC platform Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 3/3] " Chen Feng
0 siblings, 2 replies; 5+ messages in thread
From: Chen Feng @ 2015-10-27 9:51 UTC (permalink / raw)
To: puck.chen, p.zabel, linux-kernel, robh+dt, pawel.moll,
mark.rutland, ijc+devicetree
docs: dts: Added documentation for hi6220 Reset Controller
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
.../bindings/reset/hisilicon,hi6220-reset.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
new file mode 100644
index 0000000..02a8dae
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
@@ -0,0 +1,32 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on SoCs.
+
+Required properties:
+- compatible: may be "hisilicon,hi6220-reset-ctl"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+Example:
+
+reset_ctrl: reset_ctrl@f7030000 {
+compatible = "hisilicon,hi6220-reset-ctl";
+reg = <0x0 0xf7030000 0x0 0x1000>;
+#reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+ uart1: uart1@..... {
+ ...
+ resets = <&reset_ctrl 0x305>;
+ ...
+ };
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH V5 Base on RC7 2/3] Add reset controller for hi6220 SoC platform.
2015-10-27 9:51 [PATCH V5 Base on RC7 1/3] Add DT bindings documentation for hi6220 SoC reset controller Chen Feng
@ 2015-10-27 9:51 ` Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 3/3] " Chen Feng
1 sibling, 0 replies; 5+ messages in thread
From: Chen Feng @ 2015-10-27 9:51 UTC (permalink / raw)
To: puck.chen, p.zabel, linux-kernel, robh+dt, pawel.moll,
mark.rutland, ijc+devicetree
reset: add driver for hi6220 reset controller
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
drivers/reset/Kconfig | 1 +
drivers/reset/Makefile | 1 +
drivers/reset/hisilicon/Kconfig | 5 ++
drivers/reset/hisilicon/Makefile | 1 +
drivers/reset/hisilicon/hi6220_reset.c | 107 +++++++++++++++++++++++++
include/dt-bindings/reset/hisi,hi6220-resets.h | 67 ++++++++++++++++
6 files changed, 182 insertions(+)
create mode 100644 drivers/reset/hisilicon/Kconfig
create mode 100644 drivers/reset/hisilicon/Makefile
create mode 100644 drivers/reset/hisilicon/hi6220_reset.c
create mode 100644 include/dt-bindings/reset/hisi,hi6220-resets.h
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0615f50..df37212 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -13,3 +13,4 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
source "drivers/reset/sti/Kconfig"
+source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 85d5904..99e18c8 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -4,5 +4,6 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_ATH79) += reset-ath79.o
diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
new file mode 100644
index 0000000..26bf95a
--- /dev/null
+++ b/drivers/reset/hisilicon/Kconfig
@@ -0,0 +1,5 @@
+config COMMON_RESET_HI6220
+ tristate "Hi6220 Reset Driver"
+ depends on (ARCH_HISI && RESET_CONTROLLER)
+ help
+ Build the Hisilicon Hi6220 reset driver.
diff --git a/drivers/reset/hisilicon/Makefile b/drivers/reset/hisilicon/Makefile
new file mode 100644
index 0000000..c932f86
--- /dev/null
+++ b/drivers/reset/hisilicon/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_RESET_HI6220) += hi6220_reset.o
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
new file mode 100644
index 0000000..eac9531
--- /dev/null
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -0,0 +1,107 @@
+/*
+ * Hisilicon Hi6220 reset controller driver
+ *
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Feng Chen <puck.chen@hisilicon.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/reset-controller.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+
+#define ASSERT_OFFSET 0x300
+#define DEASSERT_OFFSET 0x304
+#define MAX_INDEX 0x509
+
+#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
+
+struct hi6220_reset_data {
+ void __iomem *assert_base;
+ void __iomem *deassert_base;
+ struct reset_controller_dev rc_dev;
+};
+
+static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+
+ int bank = idx >> 8;
+ int offset = idx & 0xff;
+
+ writel(BIT(offset), data->assert_base + (bank * 0x10));
+
+ return 0;
+}
+
+static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
+ unsigned long idx)
+{
+ struct hi6220_reset_data *data = to_reset_data(rc_dev);
+
+ int bank = idx >> 8;
+ int offset = idx & 0xff;
+
+ writel(BIT(offset), data->deassert_base + (bank * 0x10));
+
+ return 0;
+}
+
+static struct reset_control_ops hi6220_reset_ops = {
+ .assert = hi6220_reset_assert,
+ .deassert = hi6220_reset_deassert,
+};
+
+static int hi6220_reset_probe(struct platform_device *pdev)
+{
+ struct hi6220_reset_data *data;
+ struct resource *res;
+ void __iomem *src_base;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ src_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(src_base))
+ return PTR_ERR(src_base);
+
+ data->assert_base = src_base + ASSERT_OFFSET;
+ data->deassert_base = src_base + DEASSERT_OFFSET;
+ data->rc_dev.nr_resets = MAX_INDEX;
+ data->rc_dev.ops = &hi6220_reset_ops;
+ data->rc_dev.of_node = pdev->dev.of_node;
+
+ reset_controller_register(&data->rc_dev);
+
+ return 0;
+}
+
+static const struct of_device_id hi6220_reset_match[] = {
+ { .compatible = "hisilicon,hi6220-reset-ctl" },
+ { },
+};
+
+static struct platform_driver hi6220_reset_driver = {
+ .probe = hi6220_reset_probe,
+ .driver = {
+ .name = "reset-hi6220",
+ .of_match_table = hi6220_reset_match,
+ },
+};
+
+static int __init hi6220_reset_init(void)
+{
+ return platform_driver_register(&hi6220_reset_driver);
+}
+
+postcore_initcall(hi6220_reset_init);
diff --git a/include/dt-bindings/reset/hisi,hi6220-resets.h b/include/dt-bindings/reset/hisi,hi6220-resets.h
new file mode 100644
index 0000000..ca08a7e
--- /dev/null
+++ b/include/dt-bindings/reset/hisi,hi6220-resets.h
@@ -0,0 +1,67 @@
+/**
+ * This header provides index for the reset controller
+ * based on hi6220 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_HI6220
+#define _DT_BINDINGS_RESET_CONTROLLER_HI6220
+
+#define PERIPH_RSTDIS0_MMC0 0x000
+#define PERIPH_RSTDIS0_MMC1 0x001
+#define PERIPH_RSTDIS0_MMC2 0x002
+#define PERIPH_RSTDIS0_NANDC 0x003
+#define PERIPH_RSTDIS0_USBOTG_BUS 0x004
+#define PERIPH_RSTDIS0_POR_PICOPHY 0x005
+#define PERIPH_RSTDIS0_USBOTG 0x006
+#define PERIPH_RSTDIS0_USBOTG_32K 0x007
+#define PERIPH_RSTDIS1_HIFI 0x100
+#define PERIPH_RSTDIS1_DIGACODEC 0x105
+#define PERIPH_RSTEN2_IPF 0x200
+#define PERIPH_RSTEN2_SOCP 0x201
+#define PERIPH_RSTEN2_DMAC 0x202
+#define PERIPH_RSTEN2_SECENG 0x203
+#define PERIPH_RSTEN2_ABB 0x204
+#define PERIPH_RSTEN2_HPM0 0x205
+#define PERIPH_RSTEN2_HPM1 0x206
+#define PERIPH_RSTEN2_HPM2 0x207
+#define PERIPH_RSTEN2_HPM3 0x208
+#define PERIPH_RSTEN3_CSSYS 0x300
+#define PERIPH_RSTEN3_I2C0 0x301
+#define PERIPH_RSTEN3_I2C1 0x302
+#define PERIPH_RSTEN3_I2C2 0x303
+#define PERIPH_RSTEN3_I2C3 0x304
+#define PERIPH_RSTEN3_UART1 0x305
+#define PERIPH_RSTEN3_UART2 0x306
+#define PERIPH_RSTEN3_UART3 0x307
+#define PERIPH_RSTEN3_UART4 0x308
+#define PERIPH_RSTEN3_SSP 0x309
+#define PERIPH_RSTEN3_PWM 0x30a
+#define PERIPH_RSTEN3_BLPWM 0x30b
+#define PERIPH_RSTEN3_TSENSOR 0x30c
+#define PERIPH_RSTEN3_DAPB 0x312
+#define PERIPH_RSTEN3_HKADC 0x313
+#define PERIPH_RSTEN3_CODEC_SSI 0x314
+#define PERIPH_RSTEN3_PMUSSI1 0x316
+#define PERIPH_RSTEN8_RS0 0x400
+#define PERIPH_RSTEN8_RS2 0x401
+#define PERIPH_RSTEN8_RS3 0x402
+#define PERIPH_RSTEN8_MS0 0x403
+#define PERIPH_RSTEN8_MS2 0x405
+#define PERIPH_RSTEN8_XG2RAM0 0x406
+#define PERIPH_RSTEN8_X2SRAM_TZMA 0x407
+#define PERIPH_RSTEN8_SRAM 0x408
+#define PERIPH_RSTEN8_HARQ 0x40a
+#define PERIPH_RSTEN8_DDRC 0x40c
+#define PERIPH_RSTEN8_DDRC_APB 0x40d
+#define PERIPH_RSTEN8_DDRPACK_APB 0x40e
+#define PERIPH_RSTEN8_DDRT 0x411
+#define PERIPH_RSDIST9_CARM_DAP 0x500
+#define PERIPH_RSDIST9_CARM_ATB 0x501
+#define PERIPH_RSDIST9_CARM_LBUS 0x502
+#define PERIPH_RSDIST9_CARM_POR 0x503
+#define PERIPH_RSDIST9_CARM_CORE 0x504
+#define PERIPH_RSDIST9_CARM_DBG 0x505
+#define PERIPH_RSDIST9_CARM_L2 0x506
+#define PERIPH_RSDIST9_CARM_SOCDBG 0x507
+#define PERIPH_RSDIST9_CARM_ETM 0x508
+
+#endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH V5 Base on RC7 3/3] Add reset controller for hi6220 SoC platform.
2015-10-27 9:51 [PATCH V5 Base on RC7 1/3] Add DT bindings documentation for hi6220 SoC reset controller Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 2/3] Add reset controller for hi6220 SoC platform Chen Feng
@ 2015-10-27 9:51 ` Chen Feng
2015-10-28 11:42 ` Philipp Zabel
1 sibling, 1 reply; 5+ messages in thread
From: Chen Feng @ 2015-10-27 9:51 UTC (permalink / raw)
To: puck.chen, p.zabel, linux-kernel, robh+dt, pawel.moll,
mark.rutland, ijc+devicetree
reset: add driver for hi6220 reset controller
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380..3f055e2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -167,5 +167,12 @@
clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
clock-names = "uartclk", "apb_pclk";
};
+
+ reset_ctrl: reset_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-reset-ctl";
+ reg = <0x0 0xf7030000 0x0 0x1000>;
+ #reset-cells = <1>;
+ };
+
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V5 Base on RC7 3/3] Add reset controller for hi6220 SoC platform.
2015-10-27 9:51 ` [PATCH V5 Base on RC7 3/3] " Chen Feng
@ 2015-10-28 11:42 ` Philipp Zabel
2015-10-29 8:34 ` chenfeng
0 siblings, 1 reply; 5+ messages in thread
From: Philipp Zabel @ 2015-10-28 11:42 UTC (permalink / raw)
To: Chen Feng; +Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree
Am Dienstag, den 27.10.2015, 17:51 +0800 schrieb Chen Feng:
> reset: add driver for hi6220 reset controller
>
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 3f03380..3f055e2 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -167,5 +167,12 @@
> clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
> clock-names = "uartclk", "apb_pclk";
> };
> +
> + reset_ctrl: reset_ctrl@f7030000 {
> + compatible = "hisilicon,hi6220-reset-ctl";
> + reg = <0x0 0xf7030000 0x0 0x1000>;
> + #reset-cells = <1>;
> + };
> +
While applying I just noticed that the device tree already contains a
node claiming the same address space:
sys_ctrl: sys_ctrl@f7030000 {
compatible = "hisilicon,hi6220-sysctrl", "syscon";
reg = <0x0 0xf7030000 0x0 0x2000>;
#clock-cells = <1>;
};
It is documented in
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt and
Documentation/devicetree/bindings/clock/hi6220-clock.txt.
Could you clarify whether the reset controls are just part of the
sys_ctrl block? If so, I think you should add #reset-cells = <1> to the
sys_ctrl node instead.
regards
Philipp
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V5 Base on RC7 3/3] Add reset controller for hi6220 SoC platform.
2015-10-28 11:42 ` Philipp Zabel
@ 2015-10-29 8:34 ` chenfeng
0 siblings, 0 replies; 5+ messages in thread
From: chenfeng @ 2015-10-29 8:34 UTC (permalink / raw)
To: Philipp Zabel
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree
Thanks.
On 2015/10/28 19:42, Philipp Zabel wrote:
> Am Dienstag, den 27.10.2015, 17:51 +0800 schrieb Chen Feng:
>> reset: add driver for hi6220 reset controller
>>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 3f03380..3f055e2 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -167,5 +167,12 @@
>> clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
>> clock-names = "uartclk", "apb_pclk";
>> };
>> +
>> + reset_ctrl: reset_ctrl@f7030000 {
>> + compatible = "hisilicon,hi6220-reset-ctl";
>> + reg = <0x0 0xf7030000 0x0 0x1000>;
>> + #reset-cells = <1>;
>> + };
>> +
>
> While applying I just noticed that the device tree already contains a
> node claiming the same address space:
>
> sys_ctrl: sys_ctrl@f7030000 {
> compatible = "hisilicon,hi6220-sysctrl", "syscon";
> reg = <0x0 0xf7030000 0x0 0x2000>;
> #clock-cells = <1>;
> };
>
> It is documented in
> Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt and
> Documentation/devicetree/bindings/clock/hi6220-clock.txt.
>
> Could you clarify whether the reset controls are just part of the
> sys_ctrl block? If so, I think you should add #reset-cells = <1> to the
> sys_ctrl node instead.
>
Yes, It's a part of the sys_ctrl block, I will do as your advice.
> regards
> Philipp
>
>
> .
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-10-29 8:34 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-27 9:51 [PATCH V5 Base on RC7 1/3] Add DT bindings documentation for hi6220 SoC reset controller Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 2/3] Add reset controller for hi6220 SoC platform Chen Feng
2015-10-27 9:51 ` [PATCH V5 Base on RC7 3/3] " Chen Feng
2015-10-28 11:42 ` Philipp Zabel
2015-10-29 8:34 ` chenfeng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).