[PATCH v2 0/7] ibmvscsi code cleanup

[PATCH v2 0/7] ibmvscsi code cleanup

[Tyrel Datwyler]

Fixed up a couple spots that were out of line with the PAPR in regards
to its defined VSCSI protocol. Did away with some magic numbers directly
in the code. Fixed a minor endian issue.

--

v2 changes:

-Renamed CRQ header enums and added enums for INIT formats
-Check that crq->valid != VIOSRP_CRQ_FREE before handling in place
of hacky bitwise & to check for first bit being set.
-Added define for AIX os_type
-Left sysfs config attribute to prevent breaking userspace

Tyrel Datwyler (7):
  ibmvscsi: Correct values for several viosrp_crq_format enums
  ibmvscsi: Add and use enums for valid CRQ header values
  ibmvscsi: Replace magic values in set_adpater_info() with defines
  ibmvscsi: Use of_root to access OF device tree root node
  ibmvscsi: Remove unsupported host config MAD
  ibmvscsi: Add endian conversions to sysfs attribute show functions
  ibmvscsi: use H_CLOSED instead of magic number

 drivers/scsi/ibmvscsi/ibmvscsi.c | 128 ++++++++++-----------------------------
 drivers/scsi/ibmvscsi/viosrp.h   |  26 +++++---
 2 files changed, 49 insertions(+), 105 deletions(-)

-- 
2.5.0

[PATCH v2 1/7] ibmvscsi: Correct values for several viosrp_crq_format enums

[Tyrel Datwyler]

The enum values for VIOSRP_LINUX_FORMAT and VIOSRP_INLINE_FORMAT are
off by one. They are currently defined as 0x06 and 0x07 respetively.
These values are defined in PAPR correctly as 0x05 and 0x06. This
inconsistency has gone unnoticed as neither enum is currently used.
The possible future support of PING messages between the VIOS and
client adapter relies on VIOSRP_INLINE_FORMAT crq messages.
Corrected these enum values to match PAPR definitions.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/ibmvscsi/viosrp.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 1162430..d1044e9 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -56,8 +56,8 @@ enum viosrp_crq_formats {
 	VIOSRP_MAD_FORMAT = 0x02,
 	VIOSRP_OS400_FORMAT = 0x03,
 	VIOSRP_AIX_FORMAT = 0x04,
-	VIOSRP_LINUX_FORMAT = 0x06,
-	VIOSRP_INLINE_FORMAT = 0x07
+	VIOSRP_LINUX_FORMAT = 0x05,
+	VIOSRP_INLINE_FORMAT = 0x06
 };
 
 enum viosrp_crq_status {
-- 
2.5.0

Re: [PATCH v2 1/7] ibmvscsi: Correct values for several viosrp_crq_format enums

[Manoj Kumar]

Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>

---
Manoj Kumar

On 2/10/2016 7:32 PM, Tyrel Datwyler wrote:
> The enum values for VIOSRP_LINUX_FORMAT and VIOSRP_INLINE_FORMAT are
> off by one. They are currently defined as 0x06 and 0x07 respetively.
> These values are defined in PAPR correctly as 0x05 and 0x06. This
> inconsistency has gone unnoticed as neither enum is currently used.
> The possible future support of PING messages between the VIOS and
> client adapter relies on VIOSRP_INLINE_FORMAT crq messages.
> Corrected these enum values to match PAPR definitions.
>
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
> ---
>   drivers/scsi/ibmvscsi/viosrp.h | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
> index 1162430..d1044e9 100644
> --- a/drivers/scsi/ibmvscsi/viosrp.h
> +++ b/drivers/scsi/ibmvscsi/viosrp.h
> @@ -56,8 +56,8 @@ enum viosrp_crq_formats {
>   	VIOSRP_MAD_FORMAT = 0x02,
>   	VIOSRP_OS400_FORMAT = 0x03,
>   	VIOSRP_AIX_FORMAT = 0x04,
> -	VIOSRP_LINUX_FORMAT = 0x06,
> -	VIOSRP_INLINE_FORMAT = 0x07
> +	VIOSRP_LINUX_FORMAT = 0x05,
> +	VIOSRP_INLINE_FORMAT = 0x06
>   };
>
>   enum viosrp_crq_status {
>

[PATCH v2 2/7] ibmvscsi: Add and use enums for valid CRQ header values

[Tyrel Datwyler]

The PAPR defines four valid header values for the first byte of a
CRQ message. Namely, an unused/empty message (0x00), a valid
command/response entry (0x80), a valid initialization entry (0xC0),
and a valid transport event (0xFF). Further, initialization responses
have two formats namely initialize (0x01) and initialize complete
(0x02). Define these values as enums and use them in the code in
place of their magic number equivalents.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 18 +++++++++---------
 drivers/scsi/ibmvscsi/viosrp.h   | 12 ++++++++++++
 2 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index adfef9d..c888ea1 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -182,7 +182,7 @@ static struct viosrp_crq *crq_queue_next_crq(struct crq_queue *queue)
 
 	spin_lock_irqsave(&queue->lock, flags);
 	crq = &queue->msgs[queue->cur];
-	if (crq->valid & 0x80) {
+	if (crq->valid != VIOSRP_CRQ_FREE) {
 		if (++queue->cur == queue->size)
 			queue->cur = 0;
 
@@ -231,7 +231,7 @@ static void ibmvscsi_task(void *data)
 		/* Pull all the valid messages off the CRQ */
 		while ((crq = crq_queue_next_crq(&hostdata->queue)) != NULL) {
 			ibmvscsi_handle_crq(crq, hostdata);
-			crq->valid = 0x00;
+			crq->valid = VIOSRP_CRQ_FREE;
 		}
 
 		vio_enable_interrupts(vdev);
@@ -239,7 +239,7 @@ static void ibmvscsi_task(void *data)
 		if (crq != NULL) {
 			vio_disable_interrupts(vdev);
 			ibmvscsi_handle_crq(crq, hostdata);
-			crq->valid = 0x00;
+			crq->valid = VIOSRP_CRQ_FREE;
 		} else {
 			done = 1;
 		}
@@ -474,7 +474,7 @@ static int initialize_event_pool(struct event_pool *pool,
 		struct srp_event_struct *evt = &pool->events[i];
 		memset(&evt->crq, 0x00, sizeof(evt->crq));
 		atomic_set(&evt->free, 1);
-		evt->crq.valid = 0x80;
+		evt->crq.valid = VIOSRP_CRQ_CMD_RSP;
 		evt->crq.IU_length = cpu_to_be16(sizeof(*evt->xfer_iu));
 		evt->crq.IU_data_ptr = cpu_to_be64(pool->iu_token +
 			sizeof(*evt->xfer_iu) * i);
@@ -1767,9 +1767,9 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 	struct srp_event_struct *evt_struct =
 			(__force struct srp_event_struct *)crq->IU_data_ptr;
 	switch (crq->valid) {
-	case 0xC0:		/* initialization */
+	case VIOSRP_CRQ_INIT_RSP:		/* initialization */
 		switch (crq->format) {
-		case 0x01:	/* Initialization message */
+		case VIOSRP_CRQ_INIT:	/* Initialization message */
 			dev_info(hostdata->dev, "partner initialized\n");
 			/* Send back a response */
 			rc = ibmvscsi_send_crq(hostdata, 0xC002000000000000LL, 0);
@@ -1781,7 +1781,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			}
 
 			break;
-		case 0x02:	/* Initialization response */
+		case VIOSRP_CRQ_INIT_COMPLETE:	/* Initialization response */
 			dev_info(hostdata->dev, "partner initialization complete\n");
 
 			/* Now login */
@@ -1791,7 +1791,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
 		}
 		return;
-	case 0xFF:	/* Hypervisor telling us the connection is closed */
+	case VIOSRP_CRQ_XPORT_EVENT:	/* Hypervisor telling us the connection is closed */
 		scsi_block_requests(hostdata->host);
 		atomic_set(&hostdata->request_limit, 0);
 		if (crq->format == 0x06) {
@@ -1807,7 +1807,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 			ibmvscsi_reset_host(hostdata);
 		}
 		return;
-	case 0x80:		/* real payload */
+	case VIOSRP_CRQ_CMD_RSP:		/* real payload */
 		break;
 	default:
 		dev_err(hostdata->dev, "got an invalid message type 0x%02x\n",
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index d1044e9..3d20851 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -51,6 +51,18 @@ union srp_iu {
 	u8 reserved[SRP_MAX_IU_LEN];
 };
 
+enum viosrp_crq_headers {
+	VIOSRP_CRQ_FREE = 0x00,
+	VIOSRP_CRQ_CMD_RSP = 0x80,
+	VIOSRP_CRQ_INIT_RSP = 0xC0,
+	VIOSRP_CRQ_XPORT_EVENT = 0xFF
+};
+
+enum viosrp_crq_init_formats {
+	VIOSRP_CRQ_INIT = 0x01,
+	VIOSRP_CRQ_INIT_COMPLETE = 0x02
+};
+
 enum viosrp_crq_formats {
 	VIOSRP_SRP_FORMAT = 0x01,
 	VIOSRP_MAD_FORMAT = 0x02,
-- 
2.5.0

Re: [PATCH v2 2/7] ibmvscsi: Add and use enums for valid CRQ header values

[Johannes Thumshirn]

On Wed, Feb 10, 2016 at 07:32:23PM -0600, Tyrel Datwyler wrote:
> The PAPR defines four valid header values for the first byte of a
> CRQ message. Namely, an unused/empty message (0x00), a valid
> command/response entry (0x80), a valid initialization entry (0xC0),
> and a valid transport event (0xFF). Further, initialization responses
> have two formats namely initialize (0x01) and initialize complete
> (0x02). Define these values as enums and use them in the code in
> place of their magic number equivalents.
> 
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>

-- 
Johannes Thumshirn                                          Storage
jthumshirn@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850

Re: [PATCH v2 2/7] ibmvscsi: Add and use enums for valid CRQ header values

[Manoj Kumar]

Tyrel:

Thanks for incorporating the suggestions.

Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>

---
Manoj Kumar

On 2/10/2016 7:32 PM, Tyrel Datwyler wrote:
> The PAPR defines four valid header values for the first byte of a
> CRQ message. Namely, an unused/empty message (0x00), a valid
> command/response entry (0x80), a valid initialization entry (0xC0),
> and a valid transport event (0xFF). Further, initialization responses
> have two formats namely initialize (0x01) and initialize complete
> (0x02). Define these values as enums and use them in the code in
> place of their magic number equivalents.
>
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
> ---
>   drivers/scsi/ibmvscsi/ibmvscsi.c | 18 +++++++++---------
>   drivers/scsi/ibmvscsi/viosrp.h   | 12 ++++++++++++
>   2 files changed, 21 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
> index adfef9d..c888ea1 100644
> --- a/drivers/scsi/ibmvscsi/ibmvscsi.c
> +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
> @@ -182,7 +182,7 @@ static struct viosrp_crq *crq_queue_next_crq(struct crq_queue *queue)
>
>   	spin_lock_irqsave(&queue->lock, flags);
>   	crq = &queue->msgs[queue->cur];
> -	if (crq->valid & 0x80) {
> +	if (crq->valid != VIOSRP_CRQ_FREE) {
>   		if (++queue->cur == queue->size)
>   			queue->cur = 0;
>
> @@ -231,7 +231,7 @@ static void ibmvscsi_task(void *data)
>   		/* Pull all the valid messages off the CRQ */
>   		while ((crq = crq_queue_next_crq(&hostdata->queue)) != NULL) {
>   			ibmvscsi_handle_crq(crq, hostdata);
> -			crq->valid = 0x00;
> +			crq->valid = VIOSRP_CRQ_FREE;
>   		}
>
>   		vio_enable_interrupts(vdev);
> @@ -239,7 +239,7 @@ static void ibmvscsi_task(void *data)
>   		if (crq != NULL) {
>   			vio_disable_interrupts(vdev);
>   			ibmvscsi_handle_crq(crq, hostdata);
> -			crq->valid = 0x00;
> +			crq->valid = VIOSRP_CRQ_FREE;
>   		} else {
>   			done = 1;
>   		}
> @@ -474,7 +474,7 @@ static int initialize_event_pool(struct event_pool *pool,
>   		struct srp_event_struct *evt = &pool->events[i];
>   		memset(&evt->crq, 0x00, sizeof(evt->crq));
>   		atomic_set(&evt->free, 1);
> -		evt->crq.valid = 0x80;
> +		evt->crq.valid = VIOSRP_CRQ_CMD_RSP;
>   		evt->crq.IU_length = cpu_to_be16(sizeof(*evt->xfer_iu));
>   		evt->crq.IU_data_ptr = cpu_to_be64(pool->iu_token +
>   			sizeof(*evt->xfer_iu) * i);
> @@ -1767,9 +1767,9 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
>   	struct srp_event_struct *evt_struct =
>   			(__force struct srp_event_struct *)crq->IU_data_ptr;
>   	switch (crq->valid) {
> -	case 0xC0:		/* initialization */
> +	case VIOSRP_CRQ_INIT_RSP:		/* initialization */
>   		switch (crq->format) {
> -		case 0x01:	/* Initialization message */
> +		case VIOSRP_CRQ_INIT:	/* Initialization message */
>   			dev_info(hostdata->dev, "partner initialized\n");
>   			/* Send back a response */
>   			rc = ibmvscsi_send_crq(hostdata, 0xC002000000000000LL, 0);
> @@ -1781,7 +1781,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
>   			}
>
>   			break;
> -		case 0x02:	/* Initialization response */
> +		case VIOSRP_CRQ_INIT_COMPLETE:	/* Initialization response */
>   			dev_info(hostdata->dev, "partner initialization complete\n");
>
>   			/* Now login */
> @@ -1791,7 +1791,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
>   			dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
>   		}
>   		return;
> -	case 0xFF:	/* Hypervisor telling us the connection is closed */
> +	case VIOSRP_CRQ_XPORT_EVENT:	/* Hypervisor telling us the connection is closed */
>   		scsi_block_requests(hostdata->host);
>   		atomic_set(&hostdata->request_limit, 0);
>   		if (crq->format == 0x06) {
> @@ -1807,7 +1807,7 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
>   			ibmvscsi_reset_host(hostdata);
>   		}
>   		return;
> -	case 0x80:		/* real payload */
> +	case VIOSRP_CRQ_CMD_RSP:		/* real payload */
>   		break;
>   	default:
>   		dev_err(hostdata->dev, "got an invalid message type 0x%02x\n",
> diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
> index d1044e9..3d20851 100644
> --- a/drivers/scsi/ibmvscsi/viosrp.h
> +++ b/drivers/scsi/ibmvscsi/viosrp.h
> @@ -51,6 +51,18 @@ union srp_iu {
>   	u8 reserved[SRP_MAX_IU_LEN];
>   };
>
> +enum viosrp_crq_headers {
> +	VIOSRP_CRQ_FREE = 0x00,
> +	VIOSRP_CRQ_CMD_RSP = 0x80,
> +	VIOSRP_CRQ_INIT_RSP = 0xC0,
> +	VIOSRP_CRQ_XPORT_EVENT = 0xFF
> +};
> +
> +enum viosrp_crq_init_formats {
> +	VIOSRP_CRQ_INIT = 0x01,
> +	VIOSRP_CRQ_INIT_COMPLETE = 0x02
> +};
> +
>   enum viosrp_crq_formats {
>   	VIOSRP_SRP_FORMAT = 0x01,
>   	VIOSRP_MAD_FORMAT = 0x02,
>

[PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Tyrel Datwyler]

Add defines for mad version and mad os_type, and replace the magic
numbers in set_adapter_info() accordingly.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 8 ++++----
 drivers/scsi/ibmvscsi/viosrp.h   | 3 +++
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c888ea1..4b09a9b 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -283,8 +283,8 @@ static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
 	hostdata->madapter_info.partition_number =
 					cpu_to_be32(partition_number);
 
-	hostdata->madapter_info.mad_version = cpu_to_be32(1);
-	hostdata->madapter_info.os_type = cpu_to_be32(2);
+	hostdata->madapter_info.mad_version = cpu_to_be32(SRP_MAD_VERSION_1);
+	hostdata->madapter_info.os_type = cpu_to_be32(SRP_MAD_OS_LINUX);
 }
 
 /**
@@ -1398,7 +1398,7 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct)
 			hostdata->host->max_sectors = 
 				be32_to_cpu(hostdata->madapter_info.port_max_txu[0]) >> 9;
 		
-		if (be32_to_cpu(hostdata->madapter_info.os_type) == 3 &&
+		if (be32_to_cpu(hostdata->madapter_info.os_type) == SRP_MAD_OS_AIX &&
 		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
 			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
 				hostdata->madapter_info.srp_version);
@@ -1407,7 +1407,7 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct)
 			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
 		}
 
-		if (be32_to_cpu(hostdata->madapter_info.os_type) == 3) {
+		if (be32_to_cpu(hostdata->madapter_info.os_type) == SRP_MAD_OS_AIX) {
 			enable_fast_fail(hostdata);
 			return;
 		}
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 3d20851..d0f689b 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -221,7 +221,10 @@ struct mad_adapter_info_data {
 	char srp_version[8];
 	char partition_name[96];
 	__be32 partition_number;
+#define SRP_MAD_VERSION_1 1
 	__be32 mad_version;
+#define SRP_MAD_OS_LINUX 2
+#define SRP_MAD_OS_AIX 3
 	__be32 os_type;
 	__be32 port_max_txu[8];	/* per-port maximum transfer */
 };
-- 
2.5.0

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[James Bottomley]

On Wed, 2016-02-10 at 19:32 -0600, Tyrel Datwyler wrote:
> Add defines for mad version and mad os_type, and replace the magic
> numbers in set_adapter_info() accordingly.
> 
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
> ---

Is there some reason you didn't carry the review tag over from this:

http://mid.gmane.org/20160204084459.GW27969@c203.arch.suse.de

?

James

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Tyrel Datwyler]

On 02/12/2016 08:43 AM, James Bottomley wrote:
> On Wed, 2016-02-10 at 19:32 -0600, Tyrel Datwyler wrote:
>> Add defines for mad version and mad os_type, and replace the magic
>> numbers in set_adapter_info() accordingly.
>>
>> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
>> ---
> 
> Is there some reason you didn't carry the review tag over from this:
> 
> http://mid.gmane.org/20160204084459.GW27969@c203.arch.suse.de
> 
> ?
> 
> James

The patch is slightly changed from v1. A define for AIX os type was
added as mentioned in the cover letter v2 changes, and I moved the
defines to the mad_adapter_info_data structure around the fields they apply.

-Tyrel

> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[James Bottomley]

On Fri, 2016-02-12 at 08:51 -0800, Tyrel Datwyler wrote:
> On 02/12/2016 08:43 AM, James Bottomley wrote:
> > On Wed, 2016-02-10 at 19:32 -0600, Tyrel Datwyler wrote:
> > > Add defines for mad version and mad os_type, and replace the
> > > magic
> > > numbers in set_adapter_info() accordingly.
> > > 
> > > Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
> > > ---
> > 
> > Is there some reason you didn't carry the review tag over from
> > this:
> > 
> > http://mid.gmane.org/20160204084459.GW27969@c203.arch.suse.de
> > 
> > ?
> > 
> > James
> 
> The patch is slightly changed from v1. A define for AIX os type was
> added as mentioned in the cover letter v2 changes, and I moved the
> defines to the mad_adapter_info_data structure around the fields they 
> apply.

OK we need a re-review then ...

James

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Martin K. Petersen]

>>>>> "James" == James Bottomley <James.Bottomley@HansenPartnership.com> writes:

James> OK we need a re-review then ...

I'll hold off pushing for now.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Martin K. Petersen]

>>>>> "Tyrel" == Tyrel Datwyler <tyreld@linux.vnet.ibm.com> writes:

>> Is there some reason you didn't carry the review tag over from this:
>> 
>> http://mid.gmane.org/20160204084459.GW27969@c203.arch.suse.de
>> 
>> ?
>> 
>> James

Tyrel> The patch is slightly changed from v1. A define for AIX os type
Tyrel> was added as mentioned in the cover letter v2 changes, and I
Tyrel> moved the defines to the mad_adapter_info_data structure around
Tyrel> the fields they apply.

Johannes: Mind checking this out?

https://patchwork.kernel.org/patch/8276101/

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Johannes Thumshirn]

On Tue, Feb 16, 2016 at 10:03:24PM -0500, Martin K. Petersen wrote:
> >>>>> "Tyrel" == Tyrel Datwyler <tyreld@linux.vnet.ibm.com> writes:
> 
> >> Is there some reason you didn't carry the review tag over from this:
> >> 
> >> http://mid.gmane.org/20160204084459.GW27969@c203.arch.suse.de
> >> 
> >> ?
> >> 
> >> James
> 
> Tyrel> The patch is slightly changed from v1. A define for AIX os type
> Tyrel> was added as mentioned in the cover letter v2 changes, and I
> Tyrel> moved the defines to the mad_adapter_info_data structure around
> Tyrel> the fields they apply.
> 
> Johannes: Mind checking this out?

I'm sorry I though I already did.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>

> 
> https://patchwork.kernel.org/patch/8276101/
> 
> -- 
> Martin K. Petersen	Oracle Linux Engineering

-- 
Johannes Thumshirn                                          Storage
jthumshirn@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850

Re: [PATCH v2 3/7] ibmvscsi: Replace magic values in set_adpater_info() with defines

[Manoj Kumar]

Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>

---
Manoj Kumar

On 2/10/2016 7:32 PM, Tyrel Datwyler wrote:
> Add defines for mad version and mad os_type, and replace the magic
> numbers in set_adapter_info() accordingly.
>
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
> ---
>   drivers/scsi/ibmvscsi/ibmvscsi.c | 8 ++++----
>   drivers/scsi/ibmvscsi/viosrp.h   | 3 +++
>   2 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
> index c888ea1..4b09a9b 100644
> --- a/drivers/scsi/ibmvscsi/ibmvscsi.c
> +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
> @@ -283,8 +283,8 @@ static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
>   	hostdata->madapter_info.partition_number =
>   					cpu_to_be32(partition_number);
>
> -	hostdata->madapter_info.mad_version = cpu_to_be32(1);
> -	hostdata->madapter_info.os_type = cpu_to_be32(2);
> +	hostdata->madapter_info.mad_version = cpu_to_be32(SRP_MAD_VERSION_1);
> +	hostdata->madapter_info.os_type = cpu_to_be32(SRP_MAD_OS_LINUX);
>   }
>
>   /**
> @@ -1398,7 +1398,7 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct)
>   			hostdata->host->max_sectors =
>   				be32_to_cpu(hostdata->madapter_info.port_max_txu[0]) >> 9;
>   		
> -		if (be32_to_cpu(hostdata->madapter_info.os_type) == 3 &&
> +		if (be32_to_cpu(hostdata->madapter_info.os_type) == SRP_MAD_OS_AIX &&
>   		    strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
>   			dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
>   				hostdata->madapter_info.srp_version);
> @@ -1407,7 +1407,7 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct)
>   			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
>   		}
>
> -		if (be32_to_cpu(hostdata->madapter_info.os_type) == 3) {
> +		if (be32_to_cpu(hostdata->madapter_info.os_type) == SRP_MAD_OS_AIX) {
>   			enable_fast_fail(hostdata);
>   			return;
>   		}
> diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
> index 3d20851..d0f689b 100644
> --- a/drivers/scsi/ibmvscsi/viosrp.h
> +++ b/drivers/scsi/ibmvscsi/viosrp.h
> @@ -221,7 +221,10 @@ struct mad_adapter_info_data {
>   	char srp_version[8];
>   	char partition_name[96];
>   	__be32 partition_number;
> +#define SRP_MAD_VERSION_1 1
>   	__be32 mad_version;
> +#define SRP_MAD_OS_LINUX 2
> +#define SRP_MAD_OS_AIX 3
>   	__be32 os_type;
>   	__be32 port_max_txu[8];	/* per-port maximum transfer */
>   };
>

[PATCH v2 4/7] ibmvscsi: Use of_root to access OF device tree root node

[Tyrel Datwyler]

The root node of the OF device tree is exported as of_root. No need
to look up the root by path name. Instead just get a reference
directly via of_root.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 4b09a9b..c208295 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -248,25 +248,23 @@ static void ibmvscsi_task(void *data)
 
 static void gather_partition_info(void)
 {
-	struct device_node *rootdn;
-
 	const char *ppartition_name;
 	const __be32 *p_number_ptr;
 
 	/* Retrieve information about this partition */
-	rootdn = of_find_node_by_path("/");
-	if (!rootdn) {
+	if (!of_root)
 		return;
-	}
 
-	ppartition_name = of_get_property(rootdn, "ibm,partition-name", NULL);
+	of_node_get(of_root);
+
+	ppartition_name = of_get_property(of_root, "ibm,partition-name", NULL);
 	if (ppartition_name)
 		strncpy(partition_name, ppartition_name,
 				sizeof(partition_name));
-	p_number_ptr = of_get_property(rootdn, "ibm,partition-no", NULL);
+	p_number_ptr = of_get_property(of_root, "ibm,partition-no", NULL);
 	if (p_number_ptr)
 		partition_number = of_read_number(p_number_ptr, 1);
-	of_node_put(rootdn);
+	of_node_put(of_root);
 }
 
 static void set_adapter_info(struct ibmvscsi_host_data *hostdata)
-- 
2.5.0

[PATCH v2 5/7] ibmvscsi: Remove unsupported host config MAD

[Tyrel Datwyler]

A VIOSRP_HOST_CONFIG_TYPE management datagram (MAD) has existed in
the code for some time. From what information I've gathered from
Brian King this was likely implemented on the host side in a SLES 9
based VIOS, which is no longer supported anywhere. Further, it is
not defined in PAPR or supported by any AIX based VIOS.

Treating as bit rot and removing the associated host config code.
The config attribute and its show function are left as not to break
userspace. The behavior remains the same returning nothing.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 71 +++-------------------------------------
 drivers/scsi/ibmvscsi/viosrp.h   |  7 ----
 2 files changed, 4 insertions(+), 74 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c208295..e8d4af5 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1853,62 +1853,6 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 }
 
 /**
- * ibmvscsi_get_host_config: Send the command to the server to get host
- * configuration data.  The data is opaque to us.
- */
-static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
-				   unsigned char *buffer, int length)
-{
-	struct viosrp_host_config *host_config;
-	struct srp_event_struct *evt_struct;
-	unsigned long flags;
-	dma_addr_t addr;
-	int rc;
-
-	evt_struct = get_event_struct(&hostdata->pool);
-	if (!evt_struct) {
-		dev_err(hostdata->dev, "couldn't allocate event for HOST_CONFIG!\n");
-		return -1;
-	}
-
-	init_event_struct(evt_struct,
-			  sync_completion,
-			  VIOSRP_MAD_FORMAT,
-			  info_timeout);
-
-	host_config = &evt_struct->iu.mad.host_config;
-
-	/* The transport length field is only 16-bit */
-	length = min(0xffff, length);
-
-	/* Set up a lun reset SRP command */
-	memset(host_config, 0x00, sizeof(*host_config));
-	host_config->common.type = cpu_to_be32(VIOSRP_HOST_CONFIG_TYPE);
-	host_config->common.length = cpu_to_be16(length);
-	addr = dma_map_single(hostdata->dev, buffer, length, DMA_BIDIRECTIONAL);
-
-	if (dma_mapping_error(hostdata->dev, addr)) {
-		if (!firmware_has_feature(FW_FEATURE_CMO))
-			dev_err(hostdata->dev,
-			        "dma_mapping error getting host config\n");
-		free_event_struct(&hostdata->pool, evt_struct);
-		return -1;
-	}
-
-	host_config->buffer = cpu_to_be64(addr);
-
-	init_completion(&evt_struct->comp);
-	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
-	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-	if (rc == 0)
-		wait_for_completion(&evt_struct->comp);
-	dma_unmap_single(hostdata->dev, addr, length, DMA_BIDIRECTIONAL);
-
-	return rc;
-}
-
-/**
  * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
  * @sdev:	struct scsi_device device to configure
  *
@@ -2093,21 +2037,14 @@ static struct device_attribute ibmvscsi_host_os_type = {
 static ssize_t show_host_config(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
-
-	/* returns null-terminated host config data */
-	if (ibmvscsi_do_host_config(hostdata, buf, PAGE_SIZE) == 0)
-		return strlen(buf);
-	else
-		return 0;
+	return 0;
 }
 
 static struct device_attribute ibmvscsi_host_config = {
 	.attr = {
-		 .name = "config",
-		 .mode = S_IRUGO,
-		 },
+		.name = "config",
+		.mode = S_IRUGO,
+		},
 	.show = show_host_config,
 };
 
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index d0f689b..c1ab8a4 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -99,7 +99,6 @@ enum viosrp_mad_types {
 	VIOSRP_EMPTY_IU_TYPE = 0x01,
 	VIOSRP_ERROR_LOG_TYPE = 0x02,
 	VIOSRP_ADAPTER_INFO_TYPE = 0x03,
-	VIOSRP_HOST_CONFIG_TYPE = 0x04,
 	VIOSRP_CAPABILITIES_TYPE = 0x05,
 	VIOSRP_ENABLE_FAST_FAIL = 0x08,
 };
@@ -165,11 +164,6 @@ struct viosrp_adapter_info {
 	__be64 buffer;
 };
 
-struct viosrp_host_config {
-	struct mad_common common;
-	__be64 buffer;
-};
-
 struct viosrp_fast_fail {
 	struct mad_common common;
 };
@@ -207,7 +201,6 @@ union mad_iu {
 	struct viosrp_empty_iu empty_iu;
 	struct viosrp_error_log error_log;
 	struct viosrp_adapter_info adapter_info;
-	struct viosrp_host_config host_config;
 	struct viosrp_fast_fail fast_fail;
 	struct viosrp_capabilities capabilities;
 };
-- 
2.5.0

Re: [PATCH v2 5/7] ibmvscsi: Remove unsupported host config MAD

[Johannes Thumshirn]

On Wed, Feb 10, 2016 at 07:32:26PM -0600, Tyrel Datwyler wrote:
> A VIOSRP_HOST_CONFIG_TYPE management datagram (MAD) has existed in
> the code for some time. From what information I've gathered from
> Brian King this was likely implemented on the host side in a SLES 9
> based VIOS, which is no longer supported anywhere. Further, it is
> not defined in PAPR or supported by any AIX based VIOS.
> 
> Treating as bit rot and removing the associated host config code.
> The config attribute and its show function are left as not to break
> userspace. The behavior remains the same returning nothing.
> 
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>

-- 
Johannes Thumshirn                                          Storage
jthumshirn@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850

[PATCH v2 6/7] ibmvscsi: Add endian conversions to sysfs attribute show functions

[Tyrel Datwyler]

The values returned by the show functions for the host os_type,
mad_version, and partition_number attributes get their values
directly from the madapter_info struct whose associated fields are
__be32 typed. Added endian conversion to ensure these values are
sane on LE platforms.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index e8d4af5..6025481 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1983,7 +1983,7 @@ static ssize_t show_host_partition_number(struct device *dev,
 	int len;
 
 	len = snprintf(buf, PAGE_SIZE, "%d\n",
-		       hostdata->madapter_info.partition_number);
+		       be32_to_cpu(hostdata->madapter_info.partition_number));
 	return len;
 }
 
@@ -2003,7 +2003,7 @@ static ssize_t show_host_mad_version(struct device *dev,
 	int len;
 
 	len = snprintf(buf, PAGE_SIZE, "%d\n",
-		       hostdata->madapter_info.mad_version);
+		       be32_to_cpu(hostdata->madapter_info.mad_version));
 	return len;
 }
 
@@ -2022,7 +2022,8 @@ static ssize_t show_host_os_type(struct device *dev,
 	struct ibmvscsi_host_data *hostdata = shost_priv(shost);
 	int len;
 
-	len = snprintf(buf, PAGE_SIZE, "%d\n", hostdata->madapter_info.os_type);
+	len = snprintf(buf, PAGE_SIZE, "%d\n",
+		       be32_to_cpu(hostdata->madapter_info.os_type));
 	return len;
 }
 
-- 
2.5.0

[PATCH v2 7/7] ibmvscsi: use H_CLOSED instead of magic number

[Tyrel Datwyler]

In a couple places the magic value of 2 is used to check the return
code of hypercalls. This translates to H_CLOSED.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 6025481..d9534ee 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -314,7 +314,7 @@ static int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
-	if (rc == 2) {
+	if (rc == H_CLOSED) {
 		/* Adapter is good, but other end is not ready */
 		dev_warn(hostdata->dev, "Partner adapter not ready\n");
 	} else if (rc != 0) {
@@ -364,7 +364,7 @@ static int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 		rc = ibmvscsi_reset_crq_queue(queue,
 					      hostdata);
 
-	if (rc == 2) {
+	if (rc == H_CLOSED) {
 		/* Adapter is good, but other end is not ready */
 		dev_warn(hostdata->dev, "Partner adapter not ready\n");
 		retrc = 0;
-- 
2.5.0

Re: [PATCH v2 7/7] ibmvscsi: use H_CLOSED instead of magic number

[Johannes Thumshirn]

On Wed, Feb 10, 2016 at 07:32:28PM -0600, Tyrel Datwyler wrote:
> In a couple places the magic value of 2 is used to check the return
> code of hypercalls. This translates to H_CLOSED.
> 
> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>

-- 
Johannes Thumshirn                                          Storage
jthumshirn@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850

Re: [PATCH v2 0/7] ibmvscsi code cleanup

[Martin K. Petersen]

>>>>> "Tyrel" == Tyrel Datwyler <tyreld@linux.vnet.ibm.com> writes:

Tyrel> Fixed up a couple spots that were out of line with the PAPR in
Tyrel> regards to its defined VSCSI protocol. Did away with some magic
Tyrel> numbers directly in the code. Fixed a minor endian issue.

Applied to 4.6/scsi-queue.

(And added the missing review from Johannes for patch 3 as pointed out
by James).

-- 
Martin K. Petersen	Oracle Linux Engineering