linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
@ 2018-06-05 22:44 Ravi Chandra Sadineni
  2018-06-12 23:32 ` Dmitry Torokhov
       [not found] ` <CGME20180803072628eucas1p26abe0cb121b974401759502f8807bb96@eucas1p2.samsung.com>
  0 siblings, 2 replies; 13+ messages in thread
From: Ravi Chandra Sadineni @ 2018-06-05 22:44 UTC (permalink / raw)
  To: ravisadineni, dmitry.torokhov, dtor
  Cc: tbroch, linux-kernel, linux-input, Ravi Chandra Sadineni

Remove the unnecessary check before calling pm_wakeup_event. If the
device is not wake enabled, this call is no-op anyway.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
---
 drivers/input/keyboard/cros_ec_keyb.c | 30 ++++++++++-----------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 489ddd37bd4ee..c5e32544130dc 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -242,19 +242,17 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 	u32 val;
 	unsigned int ev_type;
 
+	/*
+	 * If not wake enabled, discard key state changes during
+	 * suspend. Switches will be re-checked in
+	 * cros_ec_keyb_resume() to be sure nothing is lost.
+	 */
+	if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
+		return NOTIFY_OK;
+
 	switch (ckdev->ec->event_data.event_type) {
 	case EC_MKBP_EVENT_KEY_MATRIX:
-		if (device_may_wakeup(ckdev->dev)) {
-			pm_wakeup_event(ckdev->dev, 0);
-		} else {
-			/*
-			 * If keyboard is not wake enabled, discard key state
-			 * changes during suspend. Switches will be re-checked
-			 * in cros_ec_keyb_resume() to be sure nothing is lost.
-			 */
-			if (queued_during_suspend)
-				return NOTIFY_OK;
-		}
+		pm_wakeup_event(ckdev->dev, 0);
 
 		if (ckdev->ec->event_size != ckdev->cols) {
 			dev_err(ckdev->dev,
@@ -268,10 +266,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 		break;
 
 	case EC_MKBP_EVENT_SYSRQ:
-		if (device_may_wakeup(ckdev->dev))
-			pm_wakeup_event(ckdev->dev, 0);
-		else if (queued_during_suspend)
-			return NOTIFY_OK;
+		pm_wakeup_event(ckdev->dev, 0);
 
 		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
 		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
@@ -280,10 +275,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 
 	case EC_MKBP_EVENT_BUTTON:
 	case EC_MKBP_EVENT_SWITCH:
-		if (device_may_wakeup(ckdev->dev))
-			pm_wakeup_event(ckdev->dev, 0);
-		else if (queued_during_suspend)
-			return NOTIFY_OK;
+		pm_wakeup_event(ckdev->dev, 0);
 
 		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
 			val = get_unaligned_le32(
-- 
2.18.0.rc1.242.g61856ae69a-goog

^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-06-05 22:44 [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event Ravi Chandra Sadineni
@ 2018-06-12 23:32 ` Dmitry Torokhov
       [not found] ` <CGME20180803072628eucas1p26abe0cb121b974401759502f8807bb96@eucas1p2.samsung.com>
  1 sibling, 0 replies; 13+ messages in thread
From: Dmitry Torokhov @ 2018-06-12 23:32 UTC (permalink / raw)
  To: Ravi Chandra Sadineni
  Cc: ravisadineni, dtor, tbroch, linux-kernel, linux-input

On Tue, Jun 05, 2018 at 03:44:57PM -0700, Ravi Chandra Sadineni wrote:
> Remove the unnecessary check before calling pm_wakeup_event. If the
> device is not wake enabled, this call is no-op anyway.
> 
> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>

Applied, thank you.

> ---
>  drivers/input/keyboard/cros_ec_keyb.c | 30 ++++++++++-----------------
>  1 file changed, 11 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index 489ddd37bd4ee..c5e32544130dc 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -242,19 +242,17 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>  	u32 val;
>  	unsigned int ev_type;
>  
> +	/*
> +	 * If not wake enabled, discard key state changes during
> +	 * suspend. Switches will be re-checked in
> +	 * cros_ec_keyb_resume() to be sure nothing is lost.
> +	 */
> +	if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
> +		return NOTIFY_OK;
> +
>  	switch (ckdev->ec->event_data.event_type) {
>  	case EC_MKBP_EVENT_KEY_MATRIX:
> -		if (device_may_wakeup(ckdev->dev)) {
> -			pm_wakeup_event(ckdev->dev, 0);
> -		} else {
> -			/*
> -			 * If keyboard is not wake enabled, discard key state
> -			 * changes during suspend. Switches will be re-checked
> -			 * in cros_ec_keyb_resume() to be sure nothing is lost.
> -			 */
> -			if (queued_during_suspend)
> -				return NOTIFY_OK;
> -		}
> +		pm_wakeup_event(ckdev->dev, 0);
>  
>  		if (ckdev->ec->event_size != ckdev->cols) {
>  			dev_err(ckdev->dev,
> @@ -268,10 +266,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>  		break;
>  
>  	case EC_MKBP_EVENT_SYSRQ:
> -		if (device_may_wakeup(ckdev->dev))
> -			pm_wakeup_event(ckdev->dev, 0);
> -		else if (queued_during_suspend)
> -			return NOTIFY_OK;
> +		pm_wakeup_event(ckdev->dev, 0);
>  
>  		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
>  		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
> @@ -280,10 +275,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>  
>  	case EC_MKBP_EVENT_BUTTON:
>  	case EC_MKBP_EVENT_SWITCH:
> -		if (device_may_wakeup(ckdev->dev))
> -			pm_wakeup_event(ckdev->dev, 0);
> -		else if (queued_during_suspend)
> -			return NOTIFY_OK;
> +		pm_wakeup_event(ckdev->dev, 0);
>  
>  		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
>  			val = get_unaligned_le32(
> -- 
> 2.18.0.rc1.242.g61856ae69a-goog
> 

-- 
Dmitry

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
       [not found] ` <CGME20180803072628eucas1p26abe0cb121b974401759502f8807bb96@eucas1p2.samsung.com>
@ 2018-08-03  7:26   ` Marek Szyprowski
       [not found]     ` <CAEZbON7qLheHFuU6zwArCz=CG03JvnFjcehBGjE4RqROYrMLhQ@mail.gmail.com>
  0 siblings, 1 reply; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-03  7:26 UTC (permalink / raw)
  To: Ravi Chandra Sadineni, ravisadineni, dmitry.torokhov, dtor
  Cc: tbroch, linux-kernel, linux-input, 'Linux Samsung SOC'

Hi All,

On 2018-06-06 00:44, Ravi Chandra Sadineni wrote:
> Remove the unnecessary check before calling pm_wakeup_event. If the
> device is not wake enabled, this call is no-op anyway.
>
> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>

This patch breaks suspend/resume on Samsung Exynos5250 Snow Chromebook. 
It looks that it is waiting forever(?) on some cros ec i2c call. With 
no_console_suspend and initcall_debug kernel parameters together with 
playing with magic-sysrq after suspend/resume cycle I've managed to get 
following log:

# rtcwake -s10 -mmem
rtcwake: wakeup from "mem" using /dev/rtc0 at Fri Aug  3 06:13:42 2018
[   38.359219] PM: suspend entry (deep)
[   38.362782] PM: Syncing filesystems ... done.
[   38.379897] Freezing user space processes ... (elapsed 0.002 seconds) 
done.
[   38.382258] OOM killer disabled.
[   38.382263] Freezing remaining freezable tasks ... (elapsed 0.001 
seconds) done.
[   38.388705] calling  input2+ @ 1610, parent: gpio-keys
[   38.388847] call input2+ returned 0 after 122 usecs
[   38.388985] calling  sound+ @ 1610, parent: platform
[   38.423739] max98095 7-0011: ASoC: PRE_PMD: LINE Left Out event 
failed: -22
[   38.435718] call sound+ returned 0 after 45628 usecs
[   38.435746] calling  panel+ @ 1610, parent: platform
[   38.435754] call panel+ returned 0 after 1 usecs
[   38.435768] calling  hdmi-audio-codec.4.auto+ @ 1610, parent: 
14530000.hdmi
[   38.435775] call hdmi-audio-codec.4.auto+ returned 0 after 1 usecs
[   38.435799] calling  backlight+ @ 1610, parent: backlight
[   38.436032] call backlight+ returned 0 after 221 usecs
[   38.436048] calling  backlight+ @ 1610, parent: platform
[   38.445536] call backlight+ returned 0 after 9257 usecs
[   38.445670] calling  mmc2:0001:3+ @ 6, parent: mmc2:0001
[   38.445700] call mmc2:0001:3+ returned 0 after 1 usecs
[   38.445733] calling  mmc2:0001:2+ @ 6, parent: mmc2:0001
[   38.445740] call mmc2:0001:2+ returned 0 after 1 usecs
[   38.445760] calling  mmc2:0001:1+ @ 6, parent: mmc2:0001
[   38.445767] call mmc2:0001:1+ returned 0 after 1 usecs
[   38.445792] calling  mmc2:0001+ @ 6, parent: mmc2
[   38.445884] calling  snd-soc-dummy+ @ 1610, parent: platform
[   38.445892] call snd-soc-dummy+ returned 0 after 1 usecs
[   38.445988] calling  cpufreq-dt+ @ 1610, parent: platform
[   38.445997] call cpufreq-dt+ returned 0 after 1 usecs
[   38.446071] calling  tps65090-charger+ @ 1610, parent: 104-0048
[   38.446079] call tps65090-charger+ returned 0 after 1 usecs
[   38.446208] calling  mmc1:e624+ @ 78, parent: mmc1
[   38.446212] calling  tps65090-pmic+ @ 1610, parent: 104-0048
[   38.446220] call tps65090-pmic+ returned 0 after 1 usecs
[   38.446279] calling  input1+ @ 1610, parent: 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller
[   38.446289] call input1+ returned 0 after 3 usecs
[   38.446305] calling 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller+ @ 1610, 
parent: 104-001e
[   38.446313] call 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller+ 
returned 0 after 1 usecs
[   38.446327] calling  cros-ec-dev.3.auto+ @ 1610, parent: 104-001e
[   38.446334] call cros-ec-dev.3.auto+ returned 0 after 1 usecs
[   38.446370] calling  104-001e+ @ 1610, parent: i2c-104
[   38.448555] call mmc1:e624+ returned 0 after 2283 usecs
[   38.450514] calling  mmc0:0001+ @ 79, parent: mmc0
[   38.457501] call mmc2:0001+ returned 0 after 11425 usecs
[   38.463830] wake enabled for irq 150
[   38.469426] calling  1-1+ @ 6, parent: usb1
[   38.474501] call 104-001e+ returned 0 after 27461 usecs
[   38.490008] call 1-1+ returned 0 after 10331 usecs
[   38.494988] calling  104-000b+ @ 1610, parent: i2c-104
[   38.512028] call mmc0:0001+ returned 0 after 36926 usecs
[   38.547373] call 104-000b+ returned 0 after 51146 usecs
[   38.670382] calling  rtc1+ @ 1610, parent: 101e0000.rtc
[   38.675688] call rtc1+ returned 0 after 2 usecs
[   38.680296] calling  rtc0+ @ 1610, parent: max77686-rtc
[   38.717626] call rtc0+ returned 0 after 31302 usecs
[   38.722578] calling  input0+ @ 1610, parent: 1-0067
[   38.727536] call input0+ returned 0 after 3 usecs
[   38.732368] calling  usb4+ @ 78, parent: xhci-hcd.2.auto
[   38.732790] calling  usb2+ @ 1614, parent: 12120000.usb
[   38.738659] calling  usb1+ @ 79, parent: 12110000.usb
[   38.743044] calling  usb3+ @ 6, parent: xhci-hcd.2.auto
[   38.748311] call usb4+ returned 0 after 10186 usecs
[   38.753567] call usb3+ returned 0 after 251 usecs
[   38.758811] call usb1+ returned 0 after 526 usecs
[   38.763006] calling  xhci-hcd.2.auto+ @ 6, parent: 12000000.dwc3
[   38.773625] call xhci-hcd.2.auto+ returned 0 after 43 usecs
[   38.779206] calling  12000000.dwc3+ @ 1610, parent: soc:usb_dwc3
[   38.785417] call 12000000.dwc3+ returned 0 after 245 usecs
[   38.790917] calling  usb_phy_generic.1.auto+ @ 1610, parent: platform
[   38.797356] call usb_phy_generic.1.auto+ returned 0 after 1 usecs
[   38.803431] calling  usb_phy_generic.0.auto+ @ 1610, parent: platform
[   38.809966] call usb_phy_generic.0.auto+ returned 0 after 1 usecs
[   38.816108] calling  Fixed MDIO bus.0+ @ 1610, parent: platform
[   38.822083] call Fixed MDIO bus.0+ returned 0 after 1 usecs
[   38.827738] calling  max77686-clk+ @ 1610, parent: 0-0009
[   38.833159] call max77686-clk+ returned 0 after 1 usecs
[   38.838478] calling  max77686-rtc+ @ 1610, parent: 0-0009
[   38.844475] wake enabled for irq 146
[   38.848184] call max77686-rtc+ returned 0 after 4181 usecs
[   38.853999] calling  max77686-pmic+ @ 1610, parent: 0-0009
[   38.859554] call max77686-pmic+ returned 0 after 1 usecs
[   38.865284] calling  exynos-drm+ @ 1610, parent: platform
[   38.871024] call usb2+ returned 0 after 114877 usecs
[   38.890105] call exynos-drm+ returned 0 after 13780 usecs
[   38.894146] calling  serial8250+ @ 1610, parent: platform
[   38.899515] call serial8250+ returned 0 after 2 usecs
[   38.908551] calling  alarmtimer+ @ 1610, parent: platform
[   38.913057] call alarmtimer+ returned 0 after 536 usecs
[   38.917812] calling  regulatory.0+ @ 1610, parent: platform
[   #8.923263] call regulatory.0+ returned 0 after 1 usecs
[   38.929144] calling  1-0067+ @ 1610, parent: i2c-1
[   38.967236] wake enabled for irq 148
[   38.969454] call 1-0067+ returned 0 after 35363 usecs
[   38.974510] calling  0-0009+ @ 1610, parent: i2c-0
[   38.979274] call 0-0009+ returned 0 after 5 usecs
[   38.983989] calling  mmc3_pwrseq+ @ 1610, parent: platform
[   38.989422] call mmc3_pwrseq+ returned 0 after 1 usecs
[   38.994522] calling  regulator-usb3+ @ 1610, parent: platform
[   39.000271] call regulator-usb3+ returned 0 after 1 usecs
[   39.005633] calling  i2c-arbitrator+ @ 1610, parent: platform
[   39.011381] call i2c-arbitrator+ returned 0 after 1 usecs
[   39.016744] calling  vbat-fixed-regulator+ @ 1610, parent: platform
[   39.023015] call vbat-fixed-regulator+ returned 0 after 1 usecs
[   39.028925] calling  gpio-keys+ @ 1610, parent: platform
[   39.034182] wake enabled for irq 152
[   39.037759] wake enabled for irq 153
[   39.041292] call gpio-keys+ returned 0 after 6944 usecs
[   39.046515] calling  opp_table0+ @ 1610, parent: platform
[   39.051915] call opp_table0+ returned 0 after 1 usecs
[   39.056940] calling  14650000.sysmmu+ @ 1610, parent: soc
[   39.062332] call 14650000.sysmmu+ returned 0 after 2 usecs
[   39.067818] calling  14640000.sysmmu+ @ 1610, parent: soc
[   39.073332] call 14640000.sysmmu+ returned 0 after 174 usecs
[   39.078845] calling  13eb0000.sysmmu+ @ 1610, parent: soc
[   39.084180] call 13eb0000.sysmmu+ returned 0 after 2 usecs
[   39.089690] calling  13ea0000.sysmmu+ @ 1610, parent: soc
[   39.095029] call 13ea0000.sysmmu+ returned 0 after 2 usecs
[   39.100547] calling  13e90000.sysmmu+ @ 1610, parent: soc
[   39.105880] call 13e90000.sysmmu+ returned 0 after 2 usecs
[   39.111402] calling  13e80000.sysmmu+ @ 1610, parent: soc
[   39.116731] call 13e80000.sysmmu+ returned 0 after 2 usecs
[   39.122241] calling  13c50000.sysmmu+ @ 1610, parent: soc
[   39.127607] call 13c50000.sysmmu+ returned 0 after 2 usecs
[   39.133065] calling  13c40000.sysmmu+ @ 1610, parent: soc
[   39.138498] call 13c40000.sysmmu+ returned 0 after 2 usecs
[   39.143915] calling  132f0000.sysmmu+ @ 1610, parent: soc
[   39.149308] call 132f0000.sysmmu+ returned 0 after 2 usecs
[   39.154765] calling  132e0000.sysmmu+ @ 1610, parent: soc
[   39.160155] call 132e0000.sysmmu+ returned 0 after 2 usecs
[   39.165615] calling  132d0000.sysmmu+ @ 1610, parent: soc
[   39.171005] call 132d0000.sysmmu+ returned 0 after 2 usecs
[   39.176465] calling  132c0000.sysmmu+ @ 1610, parent: soc
[   39.181856] call 132c0000.sysmmu+ returned 0 after 2 usecs
[   39.187340] calling  132b0000.sysmmu+ @ 1610, parent: soc
[   39.192680] call 132b0000.sysmmu+ returned 0 after 2 usecs
[   39.198190] calling  13290000.sysmmu+ @ 1610, parent: soc
[   39.203530] call 13290000.sysmmu+ returned 0 after 2 usecs
[   39.209091] calling  13280000.sysmmu+ @ 1610, parent: soc
[   39.214380] call 13280000.sysmmu+ returned 0 after 2 usecs
[   39.219892] calling  132a0000.sysmmu+ @ 1610, parent: soc
[   39.225230] call 132a0000.sysmmu+ returned 0 after 2 usecs
[   39.230749] calling  13270000.sysmmu+ @ 1610, parent: soc
[   39.236080] call 13270000.sysmmu+ returned 0 after 2 usecs
[   39.241590] calling  13260000.sysmmu+ @ 1610, parent: soc
[   39.246931] call 13260000.sysmmu+ returned 0 after 2 usecs
[   39.252440] calling  11f20000.sysmmu+ @ 1610, parent: soc
[   39.257806] call 11f20000.sysmmu+ returned 0 after 2 usecs
[   39.263265] calling  11d40000.sysmmu+ @ 1610, parent: soc
[   39.268655] call 11d40000.sysmmu+ returned 0 after 2 usecs
[   39.274115] calling  11210000.sysmmu+ @ 1610, parent: soc
[   39.279505] call 11210000.sysmmu+ returned 0 after 2 usecs
[   39.284965] calling  11200000.sysmmu+ @ 1610, parent: soc
[   39.290355] call 11200000.sysmmu+ returned 0 after 2 usecs
[   39.295815] calling  10a60000.sysmmu+ @ 1610, parent: soc
[   39.301206] call 10a60000.sysmmu+ returned 0 after 2 usecs
[   39.306657] calling  soc:video-phy+ @ 1610, parent: soc
[   39.311881] call soc:video-phy+ returned 0 after 2 usecs
[   39.317158] calling  101b0000.cec+ @ 1610, parent: soc
[   39.322296] call 101b0000.cec+ returned 0 after 1 usecs
[   39.327511] calling  13e30000.gsc+ @ 1610, parent: soc
[   39.332600] call 13e30000.gsc+ returned 0 after 1 usecs
[   39.337841] calling  13e20000.gsc+ @ 1610, parent: soc
[   39.342929] call 13e20000.gsc+ returned 0 after 1 usecs
[   39.348208] calling  13e10000.gsc+ @ 1610, parent: soc
[   39.353258] call 13e10000.gsc+ returned 0 after 1 usecs
[   39.358506] calling  13e00000.gsc+ @ 1610, parent: soc
[   39.363588] call 13e00000.gsc+ returned 0 after 1 usecs
[   39.368835] calling  11c10000.mdma+ @ 1610, parent: soc:amba
[   39.374443] call 11c10000.mdma+ returned 0 after 5 usecs
[   39.379772] calling  10800000.mdma+ @ 1610, parent: soc:amba
[   39.385379] call 10800000.mdma+ returned 0 after 5 usecs
[   39.390726] calling  121b0000.pdma+ @ 1610, parent: soc:amba
[   39.396316] call 121b0000.pdma+ returned 0 after 5 usecs
[   39.401663] calling  121a0000.pdma+ @ 1610, parent: soc:amba
[   39.407280] call 121a0000.pdma+ returned 0 after 4 usecs
[   39.412554] calling  soc:amba+ @ 1610, parent: soc
[   39.417340] call soc:amba+ returned 0 after 1 usecs
[   39.422186] calling  12130000.phy+ @ 1610, parent: soc
[   39.427323] call 12130000.phy+ returned 0 after 1 usecs
[   39.432517] calling  12120000.usb+ @ 1610, parent: soc
[   39.437820] call 12120000.usb+ returned 0 after 165 usecs
[   39.443020] calling  12110000.usb+ @ 1610, parent: soc
[   39.448434] call 12110000.usb+ returned 0 after 270 usecs
[   39.453523] calling  12100000.phy+ @ 1610, parent: soc
[   39.458662] call 12100000.phy+ returned 0 after 1 usecs
[   39.463850] calling  soc:usb_dwc3+ @ 1610, parent: soc
[   39.468994] call soc:usb_dwc3+ returned 0 after 7 usecs
[   39.474179] calling  3830000.i2s+ @ 1610, parent: soc
[   39.479232] call 3830000.i2s+ returned 0 after 2 usecs
[   39.484337] calling  12230000.mmc+ @ 1610, parent: soc
[   39.489497] call 12230000.mmc+ returned 0 after 17 usecs
[   39.494753] calling  12220000.mmc+ @ 1610, parent: soc
[   39.499900] call 12220000.mmc+ returned 0 after 11 usecs
[   39.505169] calling  12200000.mmc+ @ 1610, parent: soc
[   39.510321] call 12200000.mmc+ returned 0 after 16 usecs
[   39.515583] calling  12d30000.spi+ @ 1610, parent: soc
[   39.520864] call 12d30000.spi+ returned 0 after 140 usecs
[   39.526086] calling  12ce0000.i2c+ @ 1610, parent: soc
[   39.531225] call 12ce0000.i2c+ returned 0 after 1 usecs
[   39.536415] calling  12cd0000.i2c+ @ 1610, parent: soc
[   39.541552] call 12cd0000.i2c+ returned 0 after 1 usecs
[   39.546744] calling  12cb0000.i2c+ @ 1610, parent: soc
[   39.551881] call 12cb0000.i2c+ returned 0 after 1 usecs
[   39.557073] calling  12ca0000.i2c+ @ 1610, parent: soc
[   39.562253] call 12ca0000.i2c+ returned 0 after 1 usecs
[   39.567427] calling  10060000.tmu+ @ 1610, parent: soc
[   39.572696] call 10060000.tmu+ returned 0 after 178 usecs
[   39.577932] calling  11c00000.rotator+ @ 1610, parent: soc
[   39.583366] call 11c00000.rotator+ returned 0 after 1 usecs
[   39.588955] calling  11000000.codec+ @ 1610, parent: soc
[   39.594216] call 11000000.codec+ returned 0 after 1 usecs
[   39.599632] calling  101d0000.watchdog+ @ 1610, parent: soc
[   39.605415] call 101d0000.watchdog+ returned 0 after 256 usecs
[   39.611005] calling  10040000.system-controller+ @ 1610, parent: soc
[   39.617342] call 10040000.system-controller+ returned 0 after 1 usecs
[   39.623806] calling  10d10000.pinctrl+ @ 1610, parent: soc
[   39.629223] call 10d10000.pinctrl+ returned 0 after 1 usecs
[   39.634845] calling  13400000.pinctrl+ @ 1610, parent: soc
[   39.640247] call 13400000.pinctrl+ returned 0 after 1 usecs
[   39.646009] calling  11400000.pinctrl+ @ 1610, parent: soc
[   39.651271] call 11400000.pinctrl+ returned 0 after 1 usecs
[   39.656807] calling  soc:pmu+ @ 1610, parent: soc
[   39.661509] call soc:pmu+ returned 0 after 2 usecs
[   39.666265] calling  101c0000.mct+ @ 1610, parent: soc
[   39.671405] call 101c0000.mct+ returned 0 after 1 usecs
[   39.676596] calling  soc:timer+ @ 1610, parent: soc
[   39.681473] call soc:timer+ returned 0 after 1 usecs
[   39.686423] calling  10010000.clock-controller+ @ 1610, parent: soc
[   39.692676] call 10010000.clock-controller+ returned 0 after 1 usecs
[   39.699021] calling  100440c0.power-domain+ @ 1610, parent: Soc
[   39.704888] call 100440c0.power-domain+ returned 0 after 1 usecs
[   39.710911] calling  100440a0.power-domain+ @ 1610, parent: soc
[   39.716780] call 100440a0.power-domain+ returned 0 after 1 usecs
[   39.722802] calling  10044060.power-domain+ @ 1610, parent: soc
[   39.728697] call 10044060.power-domain+ returned 0 after 1 usecs
[   39.734669] calling  10044040.power-domain+ @ 1610, parent: soc
[   39.740589] call 10044040.power-domain+ returned 0 after 1 usecs
[   39.746560] calling  10044000.power-domain+ @ 1610, parent: soc
[   39.752486] call 10044000.power-domain+ returned 0 after 1 usecs
[   39.758477] calling  2020000.sysram+ @ 1610, parent: soc
[   39.763736] call 2020000.sysram+ returned 0 after 2 usecs
[   39.769191] calling  10850000.g2d+ @ 1610, parent: soc
[   39.774238] call 10850000.g2d+ returned 0 after 1 usecs
[   39.779480] calling  10830600.rng+ @ 1610, parent: soc
[   39.784568] call 10830600.rng+ returned 0 after 3 usecs
[   39.789808] calling  10830400.rng+ @ 1610, parent: soc
[   39.794897] call 10830400.rng+ returned 0 after 3 usecs
[   39.800137] calling  10830000.sss+ @ 1610, parent: soc
[   39.805226] call 10830000.sss+ returned 0 after 2 usecs
[   39.810468] calling  101e0000.rtc+ @ 1610, parent: soc
[   39.815639] call 101e0000.rtc+ returned 0 after 84 usecs
[   39.820886] calling  12dd0000.pwm+ @ 1610, parent: soc
[   39.825972] call 12dd0000.pwm+ returned 0 after 3 usecs
[   39.831211] calling  12c90000.i2c+ @ 1610, parent: soc
[   39.836300] call 12c90000.i2c+ returned 0 after 1 usecs
[   39.841542] calling  12c80000.i2c+ @ 1610, parent: soc
[   39.846629] call 12c80000.i2c+ returned 0 after 1 usecs
[   39.851871] calling  12c70000.i2c+ @ 1610, parent: soc
[   39.856958] call 12c70000.i2c+ returned 0 after 1 usecs
[   39.862200] calling  12c60000.i2c+ @ 1610, parent: soc
[   39.867313] call 12c60000.i2c+ returned 0 after 1 usecs
[   39.872505] calling  12c30000.serial+ @ 1610, parent: soc
[   39.878121] call 12c30000.serial+ returned 0 after 209 usecs
[   39.883531] calling  12c20000.serial+ @ 1610, parent: soc
[   39.888936] call 12c20000.serial+ returned 0 after 6 usecs
[   39.894379] calling  12c10000.serial+ @ 1610, parent: soc
[   39.899782] call 12c10000.serial+ returned 0 after 5 usecs
[   39.905229] calling  12c00000.serial+ @ 1610, parent: soc
[   39.910631] call 12c00000.serial+ returned 0 after 6 usecs
[   39.916078] calling  10050000.syscon+ @ 1610, parent: soc
[   39.921478] call 10050000.syscon+ returned 0 after 1 usecs
[   39.926929] calling  12250000.memory-controller+ @ 1610, parent: soc
[   39.933289] call 12250000.memory-controller+ returned 0 after 4 usecs
[   39.939717] calling  10000000.chipid+ @ 1610, parent: soc
[   39.945062] call 10000000.chipid+ returned 0 after 1 usecs
[   39.950564] calling  soc:syscon-reboot+ @ 1610, parent: soc
[   39.956086] call soc:syscon-reboot+ returned 0 after 1 usecs
[   39.961761] calling  soc:syscon-poweroff+ @ 1610, parent: soc
[   39.967484] call soc:syscon-poweroff+ returned 0 after 2 usecs
[   39.973344] calling  soc+ @ 1610, parent: platform
[   39.978108] call soc+ returned 0 after 1 usecs
[   39.982477] calling  exynos_cpuidle+ @ 1610, parent: platform
[   39.988230] call exynos_cpuidle+ returned 0 after 1 usecs
[   39.993609] calling  reg-dummy+ @ 1610, parent: platform
[   39.998903] call reg-dummy+ returned 0 after 1 usecs
[   40.005000] calling  regulator.49+ @ 1610, parent: 104-0048
[   40.014319] call regulator.49+ returned 0 after 4783 usecs
[   40.018399] calling  regulator.48+ @ 1610, parent: 104-0048
[   40.026464] call regulator.48+ returned 0 after 2491 usecs
[   40.030537] calling  regulator.47+ @ 1610, parent: 104-0048
[   40.038619] call regulator.47+ returned 0 after 2503 usecs
[   40.042668] calling  regulator.46+ @ 1610, parent: 104-0048
[   40.050792] call regulator.46+ returned 0 after 2484 usecs
[   40.054836] calling  regulator.45+ @ 1610, parent: 104-0048
[   40.062966] call regulator.45+ returned 0 after 2488 usecs
[   40.067007] calling  regulator.44+ @ 1610, parent: 104-0048
[   40.075128] call regulator.44+ returned 0 after 2482 usecs
[   40.079207] calling  regulator.43+ @ 1610, parent: 104-0048
[   40.087293] call regulator.43+ returned 0 after 2508 usecs
[   40.091337] calling  regulator.42+ @ 1610, parent: 104-0048
[   40.099447] call regulator.42+ returned 0 after 2502 usecs
[   40.103488M calling  regulator.41+ @ 1610, parent: 104-0048
[   40.111609] call regulator.41+ returned 0 after 2481 usecs
[   40.115658] calling  regulator.40+ @ 1610, parent: 104-0048
[   40.123782] call regulator.40+ returned 0 after 2484 usecs
[   40.127859] calling  regulator.39+ @ 1610, parent: 104-0048
[   40.135918] call regulator.39+ returned 0 after 2482 usecs
[   40.139993] calling  regulator.38+ @ 1610, parent: 104-0048
[   40.148053] call regulator.38+ returned 0 after 2482 usecs
[   40.153493] calling  regulator.37+ @ 1610, parent: 0-0009
[   40.160058] call regulator.37+ returned 0 after 2493 usecs
[   40.164100] calling  regulator.36+ @ 1610, parent: 0-0009
[   40.172105] call regulator.36+ returned 0 after 2485 usecs
[   40.176148] calling  regulator.35+ @ 1610, parent: 0-0009
[   40.184097] call regulator.35+ returned 0 after 2481 usecs
[   40.188215] calling  regulator.34+ @ 1610, parent: 0-0009
[   40.196063] call regulator.34+ returned 0 after 2484 usecs
[   40.200137] calling  regulator.33+ @ 1610, parent: 0-0009
[   40.208023] call regulator.33+ returned 0 after 2482 usecs
[   40.212067] calling  regulator.32+ @ 1610, parent: 0-0009
[   40.220014] call regulator.32+ returned 0 after 2482 usecs
[   40.224062] calling  regulator.31+ @ 1610, parent: 0-0009
[   40.232011] call regulator.31+ returned 0 after 2484 usecs
[   40.236057] calling  regulator.30+ @ 1610, parent: 0-0009
[   40.244006] call regulator.30+ returned 0 after 2481 usecs
[   40.248085] calling  regulator.29+ @ 1610, parent: 0-0009
[   40.255969] call regulator.29+ returned 0 after 2480 usecs
[   40.260047] calling  regulator.28+ @ 1610, parent: 0-0009
[   40.267963] call regulator.28+ returned 0 after 2513 usecs
[   40.272010] calling  regulator.27+ @ 1610, parent: 0-0009
[   40.279962] call regulator.27+ returned 0 after 2484 usecs
[   40.284006] calling  regulator.26+ @ 1610, parent: 0-0009
[   40.291953] call regulator.26+ returned 0 after 2480 usecs
[   40.295993] calling  regulator.25+ @ 1610, parent: 0-0009
[   40.303941] call regulator.25+ returned 0 after 2482 usecs
[   40.308021] calling  regulator.24+ @ 1610, parent: 0-0009
[   40.315905] call regulator.24+ returned 0 after 2481 usecs
[   40.319982] calling  regulator.23+ @ 1610, parent: 0-0009
[   40.327863] call regulator.23+ returned 0 after 2478 usecs
[   40.331912] calling  regulator.22+ @ 1610, parent: 0-0009
[   40.339858] call regulator.22+ returned 0 after 2482 usecs
[   40.343898] calling  regulator.21+ @ 1610, parent: 0-0009
[   40.351846] call regulator.21+ returned 0 after 2481 usecs
[   40.355894] calling  regulator.20+ @ 1610, parent: 0-0009
[   40.363838] call regulator.20+ returned 0 after 2479 usecs
[   40.367912] calling  regulator.19+ @ 1610, parent: 0-0009
[   40.375796] call regulator.19+ returned 0 after 2480 usecs
[   40.379874] calling  regulator.18+ @ 1610, parent: 0-0009
[   40.387789] call regulator.18+ returned 0 after 2513 usecs
[   40.391837] calling  regulator.17+ @ 1610, parent: 0-0009
[   40.399825] call regulator.17+ returned 0 after 2482 usecs
[   40.403868] calling  regulator.16+ @ 1610, parent: 0-0009
[   40.411816] call regulator.16+ returned 0 after 2481 usecs
[   40.415864] calling  regulator.15+ @ 1610, parent: 0-0009
[   40.423813] call regulator.15+ returned 0 after 2483 usecs
[   40.427891] calling  regulator.14+ @ 1610, parent: 0-0009
[   40.435775] call regulator.14+ returned 0 after 2480 usecs
[   40.439852] calling  regulator.13+ @ 1610, parent: 0-0009
[   40.447747] call regulator.13+ returned 0 after 2491 usecs
[   40.451791] calling  regulator.12+ @ 1610, parent: 0-0009
[   40.459718] call regulator.12+ returned 0 after 2493 usecs
[   40.463760] calling  regulator.11+ @ 1610, parent: 0-0009
[   40.471704] call regulator.11+ returned 0 after 2478 usecs
[   40.475747] calling  regulator.10+ @ 1610, parent: 0-0009
[   40.483693] call regulator.10+ returned 0 after 2479 usecs
[   40.487766] calling  regulator.9+ @ 1610, parent: 0-0009
[   40.495563] call regulator.9+ returned 0 after 2482 usecs
[   40.499553] calling  regulator.8+ @ 1610, parent: 0-0009
[   40.507358] call regulator.8+ returned 0 after 2489 usecs
[   40.511317] calling  regulator.7+ @ 1610, parent: 0-0009
[   40.519148] call regulator.7+ returned 0 after 2482 usecs
[   40.523105] calling  regulator.6+ @ 1610, parent: 0-0009
[   40.530965] call regulator.6+ returned 0 after 2481 usecs
[   40.534918] calling  regulator.5+ @ 1610, parent: 0-0009
[   40.542777] call regulator.5+ returned 0 after 2480 usecs
[   40.546732] calling  regulator.4+ @ 1610, parent: 0-0009
[   40.554589] call regulator.4+ returned 0 after 2480 usecs
[   40.558576] calling  regulator.3+ @ 1610, parent: 0-0009
[   40.566375] call regulator.3+ returned 0 after 2481 usecs
[   40.574330] calling  regulator.2+ @ 1610, parent: regulator-usb3
[   40.581488] call regulator.2+ returned 0 after 2503 usecs
[   40.585445] calling  regulator.1+ @ 1610, parent: vbat-fixed-regulator
[   40.594529] call regulator.1+ returned 0 after 2483 usecs
[   40.599129] calling  3860000.pinctrl+ @ 1610, parent: soc
[   40.603864] call 3860000.pinctrl+ returned 0 after 6 usecs
[   40.609438] calling  10d10000.pinctrl+ @ 1610, parent: soc
[   40.614804] call 10d10000.pinctrl+ returned 0 after 9 usecs
[   40.620443] calling  13400000.pinctrl+ @ 1610, parent: soc
[   40.625838] call 13400000.pinctrl+ returned 0 after 20 usecs
[   40.631656] calling  11400000.pinctrl+ @ 1610, parent: soc
[   40.636963] call 11400000.pinctrl+ returned 0 after 33 usecs
[   40.642621] calling  3810000.audss-clock-controller+ @ 1610, parent: soc
[   40.649295] call 3810000.audss-clock-controller+ returned 0 after 2 usecs
[   40.656038] calling  DISP1+ @ 1610, parent: 10010000.clock-controller
[   40.662615] call DISP1+ returned 0 after 134 usecs
[   40.667491] calling  regulator.0+ @ 1610, parent: reg-dummy
[   40.675340] call regulator.0+ returned 0 after 2501 usecs
[   40.680439] calling  145b0000.dp-controller+ @ 1610, parent: soc
[   40.685291] call 145b0000.dp-controller+ returned 0 after 3 usecs
[   40.691452] calling  14530000.hdmi+ @ 1610, parent: soc
[   40.696569] call 14530000.hdmi+ returned 0 after 2 usecs
[   40.704295] calling  14450000.mixer+ @ 1610, parent: soc
[   40.708189] call 14450000.mixer+ returned 0 after 3 usecs
[   40.713542] calling  14400000.fimd+ @ 1610, parent: soc
[   40.718772] call 14400000.fimd+ returned 0 after 3 usecs
[   40.727460] calling  14650000.sysmmu+ @ 1610, parent: soc
[   40.731412] call 14650000.sysmmu+ returned 0 after 3 usecs
[   40.736888] calling  14640000.sysmmu+ @ 1610, parent: soc
[   40.742287] call 14640000.sysmmu+ returned 0 after 2 usecs
[   40.747764] calling  13eb0000.sysmmu+ @ 1610, parent: soc
[   40.753110] call 13eb0000.sysmmu+ returned 0 after 3 usecs
[   40.758614] calling  13ea0000.sysmmu+ @ 1610, parent: soc
[   40.763960] call 13ea0000.sysmmu+ returned 0 after 2 usecs
[   40.769463] calling  13e90000.sysmmu+ @ 1610, parent: soc
[   40.774809] call 13e90000.sysmmu+ returned 0 after 2 usecs
[   40.780320] calling  13e80000.sysmmu+ @ 1610, parent: soc
[   40.785659] call 13e80000.sysmmu+ returned 0 after 2 usecs
[   40.791163] calling  13c50000.sysmmu+ @ 1610, parent: soc
[   40.796510] call 13c50000.sysmmu+ returned 0 after 2 usecs
[   40.802013] calling  13c40000.sysmmu+ @ 1610, parent: soc
[   40.807386] call 13c40000.sysmmu+ returned 0 after 2 usecs
[   40.812940] calling  11f20000.sysmmu+ @ 1610, parent: soc
[   40.818284] call 11f20000.sysmmu+ returned 0 after 3 usecs
[   40.823699] calling  11210000.sysmmu+ @ 1610, parent: soc
[   40.829088] call 11210000.sysmmu+ returned 0 after 3 usecs
[   40.834539] calling  11200000.sysmmu+ @ 1610, parent: soc
[   40.839935] call 11200000.sysmmu+ returned 0 after 2 usecs
[   40.845539] calling  3830000.i2s+ @ 1610, parent: soc
[   40.850439] call 3830000.i2s+ returned 0 after 3 usecs
[   40.855564] calling  12ce0000.i2c+ @ 1610, parent: soc
[   40.860679] call 12ce0000.i2c+ returned 0 after 1 usecs
[   40.865867] calling  12cd0000.i2c+ @ 1610, parent: soc
[   40.871007] call 12cd0000.i2c+ returned 0 after 2 usecs
[   40.876196] calling  12cb0000.i2c+ @ 1610, parent: soc
[   40.881336] call 12cb0000.i2c+ returned 0 after 1 usecs
[   40.886525] calling  12ca0000.i2c+ @ 1610, parent: soc
[   40.891666] call 12ca0000.i2c+ returned 0 after 1 usecs
[   40.896885] calling  3860000.pinctrl+ @ 1610, parent: soc
[   40.902257] call 3860000.pinctrl+ returned 0 after 2 usecs
[   40.907970] calling  3810000.audss-clock-controller+ @ 1610, parent: soc
[   40.914748] call 3810000.audss-clock-controller+ returned 0 after 350 
usecs
[   40.921371] calling  DISP1+ @ 1610, parent: 10010000.clock-controller
[   40.928050] call DISP1+ returned 0 after 263 usecs
[   40.932597] calling  12c90000.i2c+ @ 1610, parent: soc
[   40.937847] call 12c90000.i2c+ returned 0 after 165 usecs
[   40.943034] calling  12c80000.i2c+ @ 1610, parent: soc
[   40.948176] call 12c80000.i2c+ returned 0 after 3 usecs
[   40.953362] calling  12c70000.i2c+ @ 1610, parent: soc
[   40.958505] call 12c70000.i2c+ returned 0 after 4 usecs
[   40.963690] calling  12c60000.i2c+ @ 1610, parent: soc
[   40.968833] call 12c60000.i2c+ returned 0 after 3 usecs
[   40.974280] Disabling non-boot CPUs ...
[   41.019014] IRQ55 no longer affine to CPU1
[   41.022280] PM: Calling exynos_pm_suspend+0x0/0x50
[   41.029707] PM: Calling sched_clock_suspend+0x0/0x30
[   41.034649] PM: Calling timekeeping_suspend+0x0/0x2f8
[   41.034649] PM: Calling irq_gc_suspend+0x0/0x6c
[   41.034649] PM: Calling fw_suspend+0x0/0x18
[   41.034649] PM: Calling cpu_pm_suspend+0x0/0x18
[   41.034649] PM: Calling exynos_clkout_suspend+0x0/0x24
[   41.034649] PM: Calling exynos5250_clk_suspend+0x0/0x20
[   41.034649] PM: Calling combiner_suspe[   41.066995] call 
12c30000.serial+ returned 0 after 60 usecs
[   41.071122] calling  12c60000.i2c+ @ 1610, parent: soc
[   41.076307] call 12c60000.i2c+ returned 0 after 1 usecs
[   41.081450] calling  12c70000.i2c+ @ 1610, parent: soc
[   41.086607] call 12c70000.i2c+ returned 0 after 1 usecs
[   41.091807] calling  12c80000.i2c+ @ 1610, parent: soc
[   41.096898] call 12c80000.i2c+ returned 0 after 1 usecs
[   41.102133] calling  12c90000.i2c+ @ 1610, parent: soc
[   41.107228] call 12c90000.i2c+ returned 0 after 1 usecs
[   41.112470] calling  12dd0000.pwm+ @ 1610, parent: soc
[   41.117569] call 12dd0000.pwm+ returned 0 after 13 usecs
[   41.122880] calling  101e0000.rtc+ @ 1610, parent: soc
[   41.127975] s3c-btc 101e0000.rtc: rtc disabled, re-enabling
[   41.133558] call 101e0000.rtc+ returned 0 after 5456 usecs
[   41.139000] calling  10830000.sss+ @ 1610, parent: soc
[   41.144142] call 10830000.sss+ returned 0 after 2 usecs
[   41.149328] calling  10830400.rng+ @ 1610, parent: soc
[   41.154472] call 10830400.rng+ returned 0 after 1 usecs
[   41.159657] calling  10830600.rng+ @ 1610, parent: soc
[   41.164802] call 10830600.rng+ returned 0 after 3 usecs
[   41.169987] calling  10850000.g2d+ @ 1610, parent: soc
[   41.175129] call 10850000.g2d+ returned 0 after 1 usecs
[   41.180315] calling  2020000.sysram+ @ 1610, parent: soc
[   41.185633] call 2020000.sysram+ returned 0 after 1 usecs
[   41.190992] calling  10044000.power-domain+ @ 1610, parent: soc
[   41.196920] call 10044000.power-domain+ returned 0 after 1 usecs
[   41.202976] calling  10044040.power-domain+ @ 1610, parent: soc
[   41.208787] call 10044040.power-domain+ returned 0 after 1 usecs
[   41.214811] calling  10044060.power-domain+ @ 1610, parent: soc
[   41.220678] call 10044060.power-domain+ returned 0 after 1 usecs
[   41.226696] calling  100440a0.power-domain+ @ 1610, parent: soc
[   41.232594] call 100440a0.power-domain+ returned 0 after 1 usecs
[   41.238563] calling  100440c0.power-domain+ @ 1610, parent: soc
[   41.244536] call 100440c0.power-domain+ returned 0 after 1 usecs
[   41.250455] calling  10010000.clock-controller+ @ 1610, parent: soc
[   41.256742] call 10010000.clock-controller+ returned 0 after 1 usecs
[   41.263088] calling  soc:timer+ @ 1610, parent: soc
[   41.267891] call soc:timer+ returned 0 after 1 usecs
[   41.272868] calling  101c0000.mct+ @ 1610, parent: soc
[   41.277962] call 101c0000.mct+ returned 0 after 1 usecs
[   41.283199] calling  soc:pmu+ @ 1610, parent: soc
[   41.287857] call soc:pmu+ returned 0 after 2 usecs
[   41.292658] calling  11400000.pinctrl+ @ 1610, parent: soc
[   41.298103] call 11400000.pinctrl+ returned 0 after 1 usecs
[   41.303773] calling  13400000.pinctrl+ @ 1610, parent: soc
[   41.309125] call 13400000.pinctrl+ returned 0 after 1 usecs
[   41.314738] calling  10d10000.pinctrl+ @ 1610, parent: soc
[   41.320149] call 10d10000.pinctrl+ returned 0 after 2 usecs
[   41.325757] calling  10040000.system-controller+ @ 1610, parent: soc
[   41.332069] call 10040000.system-controller+ returned 0 after 1 usecs
[   41.338471] calling  101d0000.watchdog+ @ 1610, parent: soc
[   41.344054] s3c2410-wdt 101d0000.watchdog: watchdog disabled
[   41.349659] call 101d0000.watchdog+ returned 0 after 5485 usecs
[   41.355593] calling  11000000.codec+ @ 1610, parent: soc
[   41.360858] call 11000000.codec+ returned 0 after 1 usecs
[   41.366266] calling  11c00000.rotator+ @ 1610, parent: soc
[   41.371736] call 11c00000.rotator+ returned 0 after 1 usecs
[   41.377266] calling  10060000.tmu+ @ 1610, parent: soc
[   41.382437] call 10060000.tmu+ returned 0 after 31 usecs
[   41.387681] calling  12ca0000.i2c+ @ 610, parent: soc
[   41.392823] call 12ca0000.i2c+ returned 0 after 1 usecs
[   41.398010] calling  12cb0000.i2c+ @ 1610, parent: soc
[   41.403152] call 12cb0000.i2c+ returned 0 after 1 usecs
[   41.408339] calling  12cd0000.i2c+ @ 1610, parent: soc
[   41.413481] call 12cd0000.i2c+ returned 0 after 1 usecs
[   41.418669] calling  12ce0000.i2c+ @ 1610, parent: soc
[   41.423811] call 12ce0000.i2c+ returned 0 after 1 usecs
[   41.428998] calling  12d30000.spi+ @ 1610, parent: soc
[   41.434413] call 12d30000.spi+ returned 0 after 268 usecs
[   41.439502] calling  12200000.mmc+ @ 1610, parent: soc
[   41.444837] call 12200000.mmc+ returned 0 after 188 usecs
[   41.450010] calling  12220000.mmc+ @ 1610, parent: soc
[   41.450061] calling  mmc0:0001+ @ 1643, parent: mmc0
[   41.455218] call 12220000.mmc+ returned 0 after 26 usecs
[   41.460128] call mmc0:0001+ returned 0 after 19 usecs
[   41.465409] calling  12230000.mmc+ @ 1610, parent: soc
[   41.470448] calling  mmc1:e624+ @ 1644, parent: mmc1
[   41.475574] call 12230000.mmc+ returned 0 after 31 usecs
[   41.480499] call mmc1:e624+ returned 0 after 8 usecs
[   41.485796] calling  3830000.i2s+ @ 1610, parent: soc
[   41.490756] calling  mmc2:0001+ @ 1646, parent: mmc2
[   41.495767] call 3830000.i2s+ returned 0 after 2 usecs
[   41.495778] calling  soc:usb_dwc3+ @ 1610, parent: soc
[   41.511006] call soc:usb_dwc3+ returned 0 after 63 usecs
[   41.516269] calling  12100000.phy+ @ 1610, parent: soc
[   41.521357] call 12100000.phy+ returned 0 after 2 usecs
[   41.526591] calling  12110000.usb+ @ 1610, parent: soc
[   41.532034] usb usb1: root hub lost power or was reset
[   41.536810] call 12110000.usb+ returned 0 after 4980 usecs
[   41.542304] calling  12120000.usb+ @ 1610, parent: soc
[   41.542319] calling  usb1+ @ 1617, parent: 12110000.usb
[   41.551709] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 
400000Hz, actual 396825HZ div = 63)
[   41.615745] usb usb2: root hub lost power or was reset
[   41.619947] call 12120000.usb+ returned 0 after 70860 usecs
[   41.625087] calling  12130000.phy+ @ 1610, parent: soc
[   41.625111] calling  usb2+ @ 1613, parent: 12120000.usb
[   41.630177] call 12130000.phy+ returned 0 after 2 usecs
[   41.640597] calling  soc:amba+ @ 1610, parent: soc
[   41.645371] call soc:amba+ returned 0 after 1 usecs
[   41.650193] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 
50000000Hz, actual 50000000HZ div = 0)
[   41.659959] calling  121a0000.pdma+ @ 1610, parent: soc:amba
[   41.660009] call mmc2:0001+ returned 0 after 155559 usecs
[   41.665553] call 121a0000.pdma+ returned 0 after 5 usecs
[   41.665565] calling  121b0000.pdma+ @ 1610, parent: soc:amba
[   41.681649] calling  mmc2:0001:1+ @ 1647, parent: mmc2:0001
[   41.682210] call 121b0000.pdma+ returned 0 after 5 usecs
[   41.687397] call mmc2:0001:1+ returned 0 after 1 usecs
[   41.692768] calling  10800000.mdma+ @ 1610, parent: soc:amba
[   41.697822] calling  mmc2:0001:2+ @ 1648, parent: mmc2:0001
[   41.703483] call 10800000.mdma+ returned 0 after 4 usecs
[   41.709022] calling  mmc2:0001:3+ @ 1649, parent: mmc2:0001
[   41.714329] calling  11c10000.mdma+ @ 1610, parent: soc:amba
[   41.719870] call mmc2:0001:3+ returned 0 after 1 usecs
[   41.725590] call mmc2:0001:2+ returned 0 after 1 usecs
[   41.731642] call 11c10000.mdma+ returned 0 after 6 usecs
[   41.741045] calling  13e00000.gsc+ @ 1610, parent: soc
[   41.746186] call 13e00000.gsc+ returned 0 after 1 usecs
[   41.751373] calling  13e10000.gsc+ @ 1610, parent: soc
[   41.756516] call 13e10000.gsc+ returned 0 after 1 usecs
[   41.761724] calling  13e20000.gsc+ @ 1610, parent: soc
[   41.766820] call 13e20000.gsc+ returned 0 after 1 usecs
[   41.772058] calling  13e30000.gsc+ @ 1610, parent: soc
[   41.777149] call 13e30000.gsc+ returned 0 after 1 usecs
[   41.782386] calling  101b0000.cec+ @ 1610, parent: soc
[   41.787479] call 101b0000.cec+ returned 0 after 1 usecs
[   41.792715] calling  soc:video-phy+ @ 1610, parent: soc
[   41.797895] call soc:video-phy+ returned 0 after 2 usecs
[   41.801680] call usb1+ returned 0 after 243207 usecs
[   41.803225] calling  10a60000.sysmmu+ @ 1610, parent: soc
[   41.808275] calling  1-1+ @ 1635, parent: usb1
[   41.813545] call 10a60000.sysmmu+ returned 0 after 2 usecs
[   41.813563] calling  11200000.sysmmu+ @ 1610, parent: soc
[   41.828798] call 11200000.sysmmu+ returned 0 after 2 usecs
[   41.834298] calling  11210000.sysmmu+ @ 1610, parent: soc
[   41.839649] call 11210000.sysmmu+ returned 0 after 3 usecs
[   41.845147] calling  11d40000.sysmmu+ @ 1610, parent: soc
[   41.850498] call 11d40000.sysmmu+ returned 0 after 3 usecs
[   41.855997] calling  11f20000.sysmmu+ @ 1610, parent: soc
[   41.861348] call 11f20000.sysmmu+ returned 0 after 2 usecs
[   41.866846] calling  13260000.sysmmu+ @ 1610, parent: soc
[   41.872264] call 13260000.sysmmu+ returned 0 after 2 usecs
[   41.877673] calling  13270000.sysmmu+ @ 1610, parent: soc
[   41.881864] call usb2+ returned 0 after 240745 usecs
[   41.883075] call 13270000.sysmmu+ returned 0 after 3 usecs
[   41.893496] calling  132a0000.sysmmu+ @ 1610, parent: soc
[   41.898845] call 132a0000.sysmmu+ returned 0 after 2 usecs
[   41.904345] calling  13280000.sysmmu+ @ 1610, parent: soc
[   41.909695] call 13280000.sysmmu+ returned 0 after 2 usecs
[   41.915194] calling  13290000.sysmmu+ @ 1610, parent: soc
[   41.920546] call 13290000.sysmmu+ returned 0 after 3 usecs
[   41.926044] calling  132b0000.sysmmu+ @ 1610, parent: soc
[   41.931396] call 132b0000.sysmmu+ returned 0 after 3 usecs
[   41.936900] calling  132c0000.sysmmu+ @ 1610, parent: soc
[   41.942270] call 132c0000.sysmmu+ returned 0 after 2 usecs
[   41.947720] calling  132d0000.sysmmu+ @ 1610, parent: soc
[   41.953122] call 132d0000.sysmmu+ returned 0 after 3 usecs
[   41.958570] calling  132e0000.sysmmu+ @ 1610, parent: soc
[   41.962417] usb 1-1: reset high-speed USB device number 2 using 
exynos-ehci
[   41.963970] call 132e0000.sysmmu+ returned 0 after 3 usecs
[   41.976423] calling  132f0000.sysmmu+ @ 1610, parent: soc
[   41.981764] call 132f0000.sysmmu+ returned 0 after 2 usecs
[   41.987225] calling  13c40000.sysmmu+ @ 1610, parent: soc
[   41.992627] call 13c40000.sysmmu+ returned 0 after 2 usecs
[   41.998072] calling  13c50000.sysmmu+ @ 1610, parent: soc
[   42.003469] call 13c50000.sysmmu+ returned 0 after 2 usecs
[   42.008913] calling  13e80000.sysmmu+ @ 1610, parent: soc
[   42.014319] call 13e80000.sysmmu+ returned 0 after 2 usecs
[   42.019763] calling  13e90000.sysmmu+ @ 1610, parent: soc
[   42.025166] call 13e90000.sysmmu+ returned 0 after 2 usecs
[   42.030613] calling  13ea0000.sysmmu+ @ 1610, parent: soc
[   42.036015] call 13ea0000.sysmmu+ returned 0 after 2 usecs
[   42.041463] calling  13eb0000.sysmmu+ @ 1610, parent: soc
[   42.046863] call 13eb0000.sysmmu+ returned 0 after 2 usecs
[   42.052336] calling  14640000.sysmmu+ @ 1610, parent: soc
[   42.057753] call 14640000.sysmmu+ returned 0 after 65 usecs
[   42.063283] calling  14650000.sysmmu+ @ 1610, parent: soc
[   42.068626] call 14650000.sysmmu+ returned 0 after 3 usecs
[   42.074129] calling  opp_table0+ @ 1610, parent: platform
[   42.079475] call opp_table0+ returned 0 after 1 usecs
[   42.084575] calling  gpio-keys+ @ 1610, parent: platform
[   42.089805] wake disabled for irq 152
[   42.093464] wake disabled for irq 153
[   42.097095] call gpio-keys+ returned 0 after 7122 usecs
[   42.102331] calling  vbat-fixed-regulator+ @ 1610, parent: platform
[   42.108559] call vbat-fixed-regulator+ returned 0 after 2 usecs
[   42.114486] calling  i2c-arbitrator+ @ 1610, parent: platform
[   42.120186] call i2c-arbitrator+ returned 0 after 2 usecs
[   42.125615] calling  regulator-usb3+ @ 1610, parent: platform
[   42.131306] call regulator-usb3+ returned 0 after 1 usecs
[   42.136717] calling  mmc3_pwrseq+ @ 1610, parent: platform
[   42.142172] call mmc3_pwrseq+ returned 0 after 1 usecs
[   42.147294] calling  0-0009+ @ 1610, parent: i2c-0
[   42.152352] call 0-0009+ returned 0 after 279 usecs
[   42.156913] calling  1-0067+ @ 1610, parent: i2c-1
[   42.161775] wake disabled for irq 148
[   42.321621] call 1-0067+ returned 0 after 156102 usecs
[   42.325614] calling  regulatory.0+ @ 1610, parent: platform
[   42.330866] call regulatory.0+ returned 0 after 1 usecs
[   42.336121] calling  alarmtimer+ @ 1610, parent: platform
[   42.341459] call alarmtimer+ returned 0 after 6 usecs
[   42.348605] calling  serial8250+ @ 1610, parent: platform
[   42.352589] call serial8250+ returned 0 after 2 usecs
[   42.357625] calling  exynos-drm+ @ 1610, parent: platform
[   42.478238] exynos-dp 145b0000.dp-controller: Link Training Clock 
Recovery success
[   42.487049] exynos-dp 145b0000.dp-controller: Link Training success!
[   42.598098] exynos-dp 145b0000.dp-controller: Timeout of video 
streamclk ok
[   42.603648] exynos-dp 145b0000.dp-controller: unable to config video
[   42.632081] call 1-1+ returned 0 after 794948 usecs
[   42.654712] call exynos-drm+ returned 0 after 284877 usecs
[   42.660368] calling  max77686-pmic+ @ 1610, parent: 0-0009
[   42.665845] call max77686-pmic+ returned 0 after 1 usecs
[   42.671229] calling  max77686-rtc+ @ 1610, parent: 0-0009
[   42.676798] wake disabled for irq 146
[   42.680400] call max77686-rtc+ returned 0 after 3705 usecs
[   42.685914] calling  max77686-clk+ @ 1610, parent: 0-0009
[   42.691260] call max77686-clk+ returned 0 after 1 usecs
[   42.696508] calling  Fixed MDIO bus.0+ @ 1610, parent: platform
[   42.702422] call Fixed MDIO bus.0+ returned 0 after 1 usecs
[   42.708756] calling  usb_phy_generic.0.auto+ @ 1610, parent: platform
[   42.715664] call usb_phy_generic.0.auto+ returned 0 after 1 usecs
[   42.721785] calling  usb_phy_generic.1.auto+ @ 1610, parent: platform
[   42.728251] call usb_phy_generic.1.auto+ returned 0 after 1 usecs
[   42.734379] calling  12000000.dwc3+ @ 1610, parent: soc:usb_dwc3
[   42.740472] call 12000000.dwc3+ returned 0 after 79 usecs
[   42.745933] calling  input0+ @ 1610, parent: 1-0067
[   42.745948] calling  xhci-hcd.2.auto+ @ 1618, parent: 12000000.dwc3
[   42.750813] call input0+ returned 0 after 3 usecs
[   42.757161] usb usb3: root hub lost power or was reset
[   42.761865] calling  rtc0+ @ 1610, parent: max77686-rtc
[   42.767037] usb usb4: root hub lost power or was reset
[   42.780258] call xhci-hcd.2.auto+ returned 0 after 22597 usecs
[   42.786253] calling  usb3+ @ 1625, parent: xhci-hcd.2.auto
[   42.791825] calling  usb4+ @ 1630, parent: xhci-hcd.2.auto
[   42.802300] call rtc0+ returned 0 after 29281 usecs
[   42.807236] calling  rtc1+ @ 1610, parent: 101e0000.rtc
[   42.812588] call rtc1+ returned 0 after 1 usecs
[   42.817220] calling  104-001e+ @ 1610, parent: i2c-104
[   42.825054] wake disabled for irq 150
[   42.911689] call usb4+ returned 0 after 111658 usecs
[   42.912072] call usb3+ returned 0 after 111335 usecs
[   44.505817] asix 1-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1








*** break sent ***
[   63.472452] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) 
show-all-locks(d) terminate-all-tasks(e) memory-full-oom-kill(f) 
kill-all-tasks(i) thaw-filesystems(j) sak(k) 
show-backtrace-all-active-cpus(l) show-memory-usage(m) 
nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) 
unraw(r) sync(s) show-task-states(t) unmount(u) force-fb(V) 
show-blocked-tasks(w) dump-ftrace-buffer(z)

*** break sent ***
[   66.873020] sysrq: SysRq : Show backtrace of all active CPUs
[   66.878907] NMI backtrace for cpu 0
[   66.882602] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 
4.17.0-rc6-00023-g38ba34a43dbc-dirty #203
[   66.891572] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   66.897948] [<c0111ed0>] (unwind_backtrace) from [<c010e4ec>] 
(show_stack+0x10/0x14)
[   66.905999] [<c010e4ec>] (show_stack) from [<c09cea04>] 
(dump_stack+0x90/0xc8)
[   66.913539] [<c09cea04>] (dump_stack) from [<c09d4ab4>] 
(nmi_cpu_backtrace+0xf8/0x10c)
[   66.921777] [<c09d4ab4>] (nmi_cpu_backtrace) from [<c09d4bd8>] 
(nmi_trigger_cpumask_backtrace+0x110/0x148)
[   66.931793] [<c09d4bd8>] (nmi_trigger_cpumask_backtrace) from 
[<c04c0d3c>] (__handle_sysrq+0xdc/0x250)
[   66.941482] [<c04c0d3c>] (__handle_sysrq) from [<c04da95c>] 
(s3c24xx_serial_rx_drain_fifo+0x134/0x224)
[   66.951191] [<c04da95c>] (s3c24xx_serial_rx_drain_fifo) from 
[<c04db568>] (s3c24xx_serial_rx_chars+0x6c/0x198)
[   66.961600] [<c04db568>] (s3c24xx_serial_rx_chars) from [<c04db6dc>] 
(s3c64xx_serial_handle_irq+0x48/0x60)
[   66.971644] [<c04db6dc>] (s3c64xx_serial_handle_irq) from 
[<c018eb0c>] (__handle_irq_event_percpu+0x98/0x510)
[   66.981975] [<c018eb0c>] (__handle_irq_event_percpu) from 
[<c018efa0>] (handle_irq_event_percpu+0x1c/0x58)
[   66.992059] [<c018efa0>] (handle_irq_event_percpu) from [<c018f014>] 
(handle_irq_event+0x38/0x5c)
[   67.001370] [<c018f014>] (handle_irq_event) from [<c01927dc>] 
(handle_fasteoi_irq+0xa4/0x138)
[   67.010341] [<c01927dc>] (handle_fasteoi_irq) from [<c018e2e4>] 
(generic_handle_irq+0x18/0x28)
[   67.019428] [<c018e2e4>] (generic_handle_irq) from [<c018e400>] 
(__handle_domain_irq+0x6c/0xe4)
[   67.028610] [<c018e400>] (__handle_domain_irq) from [<c0465ca4>] 
(gic_handle_irq+0x54/0xa0)
[   67.037441] [<c0465ca4>] (gic_handle_irq) from [<c01019f0>] 
(__irq_svc+0x70/0xb0)
[   67.045410] Exception stack(0xc0f01ee8 to 0xc0f01f30)
[   67.050934] 1ee0:                   00000001 00000001 00000000 
c0f0bc00 91f13160 0000000f
[   67.059626] 1f00: 00000000 c0f7aad4 00000000 00000000 eefb47c0 
00000000 00000000 c0f01f38
[   67.068324] 1f20: c0180a08 c06c4e0c 20000153 ffffffff
[   67.073876] [<c01019f0>] (__irq_svc) from [<c06c4e0c>] 
(cpuidle_enter_state+0x1c0/0x498)
[   67.082500] [<c06c4e0c>] (cpuidle_enter_state) from [<c015c1e8>] 
(do_idle+0x1c0/0x278)
[   67.090967] [<c015c1e8>] (do_idle) from [<c015c5e0>] 
(cpu_startup_entry+0x18/0x1c)
[   67.099089] [<c015c5e0>] (cpu_startup_entry) from [<c0e00dc0>] 
(start_kernel+0x3ec/0x46c)
[   67.107837] Sending NMI from CPU 0 to CPUs 1:
[   67.112750] NMI backtrace for cpu 1
[   67.112756] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 
4.17.0-rc6-00023-g38ba34a43dbc-dirty #203
[   67.112758] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   67.112764] PC is at cpuidle_enter_state+0x1c0/0x498
[   67.112769] LR is at trace_hardirqs_on_caller+0x100/0x1e0
[   67.112772] pc : [<c06c4e0c>]    lr : [<c0180a08>] psr: 20000013
[   67.112775] sp : ee8f7f70  ip : 00000000  fp : 00000000
[   67.112777] r10: eefc67c0  r9 : 00000000  r8 : 00000001
[   67.112780] r7 : c0f7aad4  r6 : 00000001  r5 : 0000000f  r4 : a03b2a20
[   67.112782] r3 : ee8ea640  r2 : 00000000  r1 : 00000001  r0 : 00000001
[   67.112786] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM 
Segment none
[   67.112788] Control: 10c5387d  Table: 6c06806a  DAC: 00000051
[   67.112793] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 
4.17.0-rc6-00023-g38ba34a43dbc-dirty #203
[   67.112795] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   67.112801] [<c0111ed0>] (unwind_backtrace) from [<c010e4ec>] 
(show_stack+0x10/0x14)
[   67.112807] [<c010e4ec>] (show_stack) from [<c09cea04>] 
(dump_stack+0x90/0xc8)
[   67.112813] [<c09cea04>] (dump_stack) from [<c09d4a64>] 
(nmi_cpu_backt2ace+0xa8/0x10c)
[   67.112818] [<c09d4a64>] (nmi_cpu_backtrace) from [<c0110c4c>] 
(handle_IPI+0x108/0x3e4)
[   67.112824] [<c0110c4c>] (handle_IPI) from [<c0465ce4>] 
(gic_handle_irq+0x94/0xa0)
[   67.112829] [<c0465ce4>] (gic_handle_irq) from [<c01019f0>] 
(__irq_svc+0x70/0xb0)
[   67.112831] Exception stack(0xee8f7f20 to 0xee8f7f68)
[   67.112836] 7f20: 00000001 00000001 00000000 ee8ea640 a03b2a20 
0000000f 00000001 c0f7aad4
[   67.112841] 7f40: 00000001 00000000 eefc67c0 00000000 00000000 
ee8f7f70 c0180a08 c06c4e0c
[   67.112844] 7f60: 20000013 ffffffff
[   67.112850] [<c01019f0>] (__irq_svc) from [<c06c4e0c>] 
(cpuidle_enter_state+0x1c0/0x498)
[   67.112857] [<c06c4e0c>] (cpuidle_enter_state) from [<c015c1e8>] 
(do_idle+0x1c0/0x278)
[   67.112862] [<c015c1e8>] (do_idle) from [<c015c5e0>] 
(cpu_startup_entry+0x18/0x1c)
[   67.112867] [<c015c5e0>] (cpu_startup_entry) from [<401028ac>] 
(0x401028ac)
[   67.114359] cros-ec-i2c 104-001e: bad packet checksum
[   67.322533] call 104-001e+ returned 0 after 23925980 usecs
[   67.328468] calling  cros-ec-dev.3.auto+ @ 1610, parent: 104-001e
[   67.335024] call cros-ec-dev.3.auto+ returned 0 after 1 usecs
[   67.341192] calling 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller+ @ 1610, 
parent: 104-001e
[   67.351704] call 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller+ 
returned 0 after 1 usecs
[   67.361881] calling  input1+ @ 1610, parent: 
i2c-arbitrator:i2c@0:embedded-controller@1e:keyboard-controller
[   67.372254] call input1+ returned 0 after 3 usecs
[   67.377450] calling  tps65090-pmic+ @ 1610, parent: 104-0048
[   67.383604] call tps65090-pmic+ returned 0 after 1 usecs
[   67.389409] calling  tps65090-charger+ @ 1610, parent: 104-0048
[   67.395783] call tps65090-charger+ returned 0 after 1 usecs
[   67.401811] calling  cpufreq-dt+ @ 1610, parent: platform
[   67.407613] call cpufreq-dt+ returned 0 after 1 usecs
[   67.413094] calling  snd-soc-dummy+ @ 1610, parent: platform
[   67.419141] call snd-soc-dummy+ returned 0 after 1 usecs
[   67.424949] calling  backlight+ @ 1610, parent: platform
[   67.430781] call backlight+ returned 0 after 206 usecs
[   67.436251] calling  backlight+ @ 1610, parent: backlight
[   67.441954] call backlight+ returned 0 after 3 usecs
[   67.447256] calling  hdmi-audio-codec.4.auto+ @ 1610, parent: 
14530000.hdmi
[   67.454596] call hdmi-audio-codec.4.auto+ returned 0 after 1 usecs
[   67.461098] calling  panel+ @ 1610, parent: platform
[   67.466391] call panel+ returned 0 after 1 usecs
[   67.471315] calling  sound+ @ 1610, parent: platform
[   67.477289] call sound+ returned 0 after 673 usecs
[   67.482595] calling  input2+ @ 1610, parent: gpio-keys
[   67.488097] call input2+ returned 0 after 2 usecs
[   67.498847] OOM killer enabled.
[   67.502391] Restarting tasks ... done.



> ---
>   drivers/input/keyboard/cros_ec_keyb.c | 30 ++++++++++-----------------
>   1 file changed, 11 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index 489ddd37bd4ee..c5e32544130dc 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -242,19 +242,17 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>   	u32 val;
>   	unsigned int ev_type;
>   
> +	/*
> +	 * If not wake enabled, discard key state changes during
> +	 * suspend. Switches will be re-checked in
> +	 * cros_ec_keyb_resume() to be sure nothing is lost.
> +	 */
> +	if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
> +		return NOTIFY_OK;
> +
>   	switch (ckdev->ec->event_data.event_type) {
>   	case EC_MKBP_EVENT_KEY_MATRIX:
> -		if (device_may_wakeup(ckdev->dev)) {
> -			pm_wakeup_event(ckdev->dev, 0);
> -		} else {
> -			/*
> -			 * If keyboard is not wake enabled, discard key state
> -			 * changes during suspend. Switches will be re-checked
> -			 * in cros_ec_keyb_resume() to be sure nothing is lost.
> -			 */
> -			if (queued_during_suspend)
> -				return NOTIFY_OK;
> -		}
> +		pm_wakeup_event(ckdev->dev, 0);
>   
>   		if (ckdev->ec->event_size != ckdev->cols) {
>   			dev_err(ckdev->dev,
> @@ -268,10 +266,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>   		break;
>   
>   	case EC_MKBP_EVENT_SYSRQ:
> -		if (device_may_wakeup(ckdev->dev))
> -			pm_wakeup_event(ckdev->dev, 0);
> -		else if (queued_during_suspend)
> -			return NOTIFY_OK;
> +		pm_wakeup_event(ckdev->dev, 0);
>   
>   		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
>   		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
> @@ -280,10 +275,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
>   
>   	case EC_MKBP_EVENT_BUTTON:
>   	case EC_MKBP_EVENT_SWITCH:
> -		if (device_may_wakeup(ckdev->dev))
> -			pm_wakeup_event(ckdev->dev, 0);
> -		else if (queued_during_suspend)
> -			return NOTIFY_OK;
> +		pm_wakeup_event(ckdev->dev, 0);
>   
>   		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
>   			val = get_unaligned_le32(
>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
       [not found]     ` <CAEZbON7qLheHFuU6zwArCz=CG03JvnFjcehBGjE4RqROYrMLhQ@mail.gmail.com>
@ 2018-08-03 16:07       ` Dmitry Torokhov
       [not found]         ` <CAEZbON4O0X8Fo6eAbmPOSiB1_Tw7x+Ox3ROoGfZQn72uQGQLkg@mail.gmail.com>
  0 siblings, 1 reply; 13+ messages in thread
From: Dmitry Torokhov @ 2018-08-03 16:07 UTC (permalink / raw)
  To: Ravi Chandra Sadineni
  Cc: Marek Szyprowski, Ravi Chandra Sadineni, Dmitry Torokhov,
	Todd Broch, lkml, linux-input, linux-samsung-soc

On Fri, Aug 3, 2018 at 8:51 AM Ravi Chandra Sadineni
<ravisadineni@chromium.org> wrote:
>
> Hi Marek,
>
> Can you please give me little more context ? Snow is still on 3.8.11. This patch is not backported to 3.8.11. Are you trying to flash a different kernel  on snow?
>

Ravi, from upstream perspective what kernel Google uses when shipping
Snow is completely immaterial. Mainline is supposed to work equally
well on all devices.

Thanks.

-- 
Dmitry

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
       [not found]         ` <CAEZbON4O0X8Fo6eAbmPOSiB1_Tw7x+Ox3ROoGfZQn72uQGQLkg@mail.gmail.com>
@ 2018-08-06  5:29           ` Marek Szyprowski
  2018-08-06  6:16             ` Dmitry Torokhov
  0 siblings, 1 reply; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-06  5:29 UTC (permalink / raw)
  To: Ravi Chandra Sadineni, Dmitry Torokhov
  Cc: Ravi Chandra Sadineni, Dmitry Torokhov, Todd Broch, linux-kernel,
	linux-input, linux-samsung-soc

Hi Ravi,

On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
> Understood. I am trying to reproduce this issue locally. Wanted to 
> know the version of the kernel so I can give a try. Marek, can you 
> please confirm the kernel version.
>

Yes, sorry for the missing context, I was in hurry writing the report and
I wanted to send it before leaving the office. I'm testing mainline on Snow
with exynos_defconfig.

Suspend/resume is partially broken already with mainline, but if you disable
CPUfreq support, it works fine on Linux v4.17.

I've posted CPUfreq related fixes here if you are interested:
https://patchwork.kernel.org/patch/10554607/
https://patchwork.kernel.org/patch/10554603/

The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
the first release with that patch. Linux -next from 20180803, which has 
a few
more patches for cros_ec_keyb suffers from the same issue.


>
> On Fri, Aug 3, 2018 at 9:08 AM Dmitry Torokhov 
> <dmitry.torokhov@gmail.com <mailto:dmitry.torokhov@gmail.com>> wrote:
>
>     On Fri, Aug 3, 2018 at 8:51 AM Ravi Chandra Sadineni
>     <ravisadineni@chromium.org <mailto:ravisadineni@chromium.org>> wrote:
>     >
>     > Hi Marek,
>     >
>     > Can you please give me little more context ? Snow is still on
>     3.8.11. This patch is not backported to 3.8.11. Are you trying to
>     flash a different kernel  on snow?
>     >
>
>     Ravi, from upstream perspective what kernel Google uses when shipping
>     Snow is completely immaterial. Mainline is supposed to work equally
>     well on all devices.
>
>     Thanks.
>
>     -- 
>     Dmitry
>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-06  5:29           ` Marek Szyprowski
@ 2018-08-06  6:16             ` Dmitry Torokhov
  2018-08-06  7:15               ` Marek Szyprowski
  0 siblings, 1 reply; 13+ messages in thread
From: Dmitry Torokhov @ 2018-08-06  6:16 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Ravi Chandra Sadineni, Ravi Chandra Sadineni, Todd Broch, lkml,
	linux-input, linux-samsung-soc

On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Ravi,
>
> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
> > Understood. I am trying to reproduce this issue locally. Wanted to
> > know the version of the kernel so I can give a try. Marek, can you
> > please confirm the kernel version.
> >
>
> Yes, sorry for the missing context, I was in hurry writing the report and
> I wanted to send it before leaving the office. I'm testing mainline on Snow
> with exynos_defconfig.
>
> Suspend/resume is partially broken already with mainline, but if you disable
> CPUfreq support, it works fine on Linux v4.17.
>
> I've posted CPUfreq related fixes here if you are interested:
> https://patchwork.kernel.org/patch/10554607/
> https://patchwork.kernel.org/patch/10554603/
>
> The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
> the first release with that patch.

Marek, this patch should only be in -next, I do not believe I sent it
to Linus just yet. If mainline is broken for you it can't be caused by
this patch.

> Linux -next from 20180803, which has a few
> more patches for cros_ec_keyb suffers from the same issue.

Just to confirm, if you revert only this patch from -next you get
suspend/resume back?

Thanks.

-- 
Dmitry

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-06  6:16             ` Dmitry Torokhov
@ 2018-08-06  7:15               ` Marek Szyprowski
  2018-08-06 23:05                 ` Ravi Chandra Sadineni
  0 siblings, 1 reply; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-06  7:15 UTC (permalink / raw)
  To: Dmitry Torokhov
  Cc: Ravi Chandra Sadineni, Ravi Chandra Sadineni, Todd Broch, lkml,
	linux-input, linux-samsung-soc

Hi Dmitry

On 2018-08-06 08:16, Dmitry Torokhov wrote:
> On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> Hi Ravi,
>>
>> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
>>> Understood. I am trying to reproduce this issue locally. Wanted to
>>> know the version of the kernel so I can give a try. Marek, can you
>>> please confirm the kernel version.
>>>
>> Yes, sorry for the missing context, I was in hurry writing the report and
>> I wanted to send it before leaving the office. I'm testing mainline on Snow
>> with exynos_defconfig.
>>
>> Suspend/resume is partially broken already with mainline, but if you disable
>> CPUfreq support, it works fine on Linux v4.17.
>>
>> I've posted CPUfreq related fixes here if you are interested:
>> https://patchwork.kernel.org/patch/10554607/
>> https://patchwork.kernel.org/patch/10554603/
>>
>> The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
>> the first release with that patch.
> Marek, this patch should only be in -next, I do not believe I sent it
> to Linus just yet. If mainline is broken for you it can't be caused by
> this patch.

Aaahh. My fault then. The suspend/resume issue is cause by commit
38ba34a43dbc ("Input: cros_ec_keyb - mark cros_ec_keyb driver as wake
enabled device."), which has been merged to v4.18-rc1.

It looks that I've downloaded wrong patch from the patchwork to reply it
with a a bug report. :( I'm really sorry for the noise in the wrong thread.

Ravi: please let me know how can I help you to debug this issue.

>
>> Linux -next from 20180803, which has a few
>> more patches for cros_ec_keyb suffers from the same issue.
> Just to confirm, if you revert only this patch from -next you get
> suspend/resume back?
>
> Thanks.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-06  7:15               ` Marek Szyprowski
@ 2018-08-06 23:05                 ` Ravi Chandra Sadineni
  2018-08-07 21:59                   ` Ravi Chandra Sadineni
  0 siblings, 1 reply; 13+ messages in thread
From: Ravi Chandra Sadineni @ 2018-08-06 23:05 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Dmitry Torokhov, Ravi Chandra Sadineni, Todd Broch, linux-kernel,
	linux-input, linux-samsung-soc

Hi Merek,

Thanks for the info. Lemme understand what's going on. Will update the
thread once I have more info.

Thanks,
Ravi
On Mon, Aug 6, 2018 at 12:15 AM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Dmitry
>
> On 2018-08-06 08:16, Dmitry Torokhov wrote:
> > On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> Hi Ravi,
> >>
> >> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
> >>> Understood. I am trying to reproduce this issue locally. Wanted to
> >>> know the version of the kernel so I can give a try. Marek, can you
> >>> please confirm the kernel version.
> >>>
> >> Yes, sorry for the missing context, I was in hurry writing the report and
> >> I wanted to send it before leaving the office. I'm testing mainline on Snow
> >> with exynos_defconfig.
> >>
> >> Suspend/resume is partially broken already with mainline, but if you disable
> >> CPUfreq support, it works fine on Linux v4.17.
> >>
> >> I've posted CPUfreq related fixes here if you are interested:
> >> https://patchwork.kernel.org/patch/10554607/
> >> https://patchwork.kernel.org/patch/10554603/
> >>
> >> The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
> >> the first release with that patch.
> > Marek, this patch should only be in -next, I do not believe I sent it
> > to Linus just yet. If mainline is broken for you it can't be caused by
> > this patch.
>
> Aaahh. My fault then. The suspend/resume issue is cause by commit
> 38ba34a43dbc ("Input: cros_ec_keyb - mark cros_ec_keyb driver as wake
> enabled device."), which has been merged to v4.18-rc1.
>
> It looks that I've downloaded wrong patch from the patchwork to reply it
> with a a bug report. :( I'm really sorry for the noise in the wrong thread.
>
> Ravi: please let me know how can I help you to debug this issue.
>
> >
> >> Linux -next from 20180803, which has a few
> >> more patches for cros_ec_keyb suffers from the same issue.
> > Just to confirm, if you revert only this patch from -next you get
> > suspend/resume back?
> >
> > Thanks.
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-06 23:05                 ` Ravi Chandra Sadineni
@ 2018-08-07 21:59                   ` Ravi Chandra Sadineni
  2018-08-08  5:03                     ` Marek Szyprowski
       [not found]                     ` <85a59afc-9dc0-b9fb-7e8f-32731337884c@samsung.com>
  0 siblings, 2 replies; 13+ messages in thread
From: Ravi Chandra Sadineni @ 2018-08-07 21:59 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Dmitry Torokhov, Ravi Chandra Sadineni, Todd Broch, linux-kernel,
	linux-input, linux-samsung-soc

hi Merek,

I tried booting a snow device and could not get it to boot it to the
console. I assume i don't have right kernel config. Can you share your
config if possible.

Thanks,
RaviOn Mon, Aug 6, 2018 at 4:05 PM Ravi Chandra Sadineni
<ravisadineni@chromium.org> wrote:
>
> Hi Merek,
>
> Thanks for the info. Lemme understand what's going on. Will update the
> thread once I have more info.
>
> Thanks,
> Ravi
> On Mon, Aug 6, 2018 at 12:15 AM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
> >
> > Hi Dmitry
> >
> > On 2018-08-06 08:16, Dmitry Torokhov wrote:
> > > On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
> > > <m.szyprowski@samsung.com> wrote:
> > >> Hi Ravi,
> > >>
> > >> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
> > >>> Understood. I am trying to reproduce this issue locally. Wanted to
> > >>> know the version of the kernel so I can give a try. Marek, can you
> > >>> please confirm the kernel version.
> > >>>
> > >> Yes, sorry for the missing context, I was in hurry writing the report and
> > >> I wanted to send it before leaving the office. I'm testing mainline on Snow
> > >> with exynos_defconfig.
> > >>
> > >> Suspend/resume is partially broken already with mainline, but if you disable
> > >> CPUfreq support, it works fine on Linux v4.17.
> > >>
> > >> I've posted CPUfreq related fixes here if you are interested:
> > >> https://patchwork.kernel.org/patch/10554607/
> > >> https://patchwork.kernel.org/patch/10554603/
> > >>
> > >> The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
> > >> the first release with that patch.
> > > Marek, this patch should only be in -next, I do not believe I sent it
> > > to Linus just yet. If mainline is broken for you it can't be caused by
> > > this patch.
> >
> > Aaahh. My fault then. The suspend/resume issue is cause by commit
> > 38ba34a43dbc ("Input: cros_ec_keyb - mark cros_ec_keyb driver as wake
> > enabled device."), which has been merged to v4.18-rc1.
> >
> > It looks that I've downloaded wrong patch from the patchwork to reply it
> > with a a bug report. :( I'm really sorry for the noise in the wrong thread.
> >
> > Ravi: please let me know how can I help you to debug this issue.
> >
> > >
> > >> Linux -next from 20180803, which has a few
> > >> more patches for cros_ec_keyb suffers from the same issue.
> > > Just to confirm, if you revert only this patch from -next you get
> > > suspend/resume back?
> > >
> > > Thanks.
> >
> > Best regards
> > --
> > Marek Szyprowski, PhD
> > Samsung R&D Institute Poland
> >

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-07 21:59                   ` Ravi Chandra Sadineni
@ 2018-08-08  5:03                     ` Marek Szyprowski
       [not found]                     ` <85a59afc-9dc0-b9fb-7e8f-32731337884c@samsung.com>
  1 sibling, 0 replies; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-08  5:03 UTC (permalink / raw)
  To: Ravi Chandra Sadineni
  Cc: Dmitry Torokhov, Ravi Chandra Sadineni, Todd Broch, linux-kernel,
	linux-input, linux-samsung-soc

Hi Ravi,

On 2018-08-07 23:59, Ravi Chandra Sadineni wrote:
> hi Merek,
>
> I tried booting a snow device and could not get it to boot it to the
> console. I assume i don't have right kernel config. Can you share your
> config if possible.

I use standard exynos_defconfig bundled with Linux kernel. I've followed
this instruction to boot in on Snow:

https://s-opensource.org/2016/03/24/use-mainline-u-boot-non-signed-kernels-exynos-chromebooks/

>
> Thanks,
> RaviOn Mon, Aug 6, 2018 at 4:05 PM Ravi Chandra Sadineni
> <ravisadineni@chromium.org> wrote:
>> Hi Merek,
>>
>> Thanks for the info. Lemme understand what's going on. Will update the
>> thread once I have more info.
>>
>> Thanks,
>> Ravi
>> On Mon, Aug 6, 2018 at 12:15 AM Marek Szyprowski
>> <m.szyprowski@samsung.com> wrote:
>>> Hi Dmitry
>>>
>>> On 2018-08-06 08:16, Dmitry Torokhov wrote:
>>>> On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
>>>> <m.szyprowski@samsung.com> wrote:
>>>>> Hi Ravi,
>>>>>
>>>>> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
>>>>>> Understood. I am trying to reproduce this issue locally. Wanted to
>>>>>> know the version of the kernel so I can give a try. Marek, can you
>>>>>> please confirm the kernel version.
>>>>>>
>>>>> Yes, sorry for the missing context, I was in hurry writing the report and
>>>>> I wanted to send it before leaving the office. I'm testing mainline on Snow
>>>>> with exynos_defconfig.
>>>>>
>>>>> Suspend/resume is partially broken already with mainline, but if you disable
>>>>> CPUfreq support, it works fine on Linux v4.17.
>>>>>
>>>>> I've posted CPUfreq related fixes here if you are interested:
>>>>> https://patchwork.kernel.org/patch/10554607/
>>>>> https://patchwork.kernel.org/patch/10554603/
>>>>>
>>>>> The issue with cros_ec_keyb patch appears first on Linux v4.18-rc1, which is
>>>>> the first release with that patch.
>>>> Marek, this patch should only be in -next, I do not believe I sent it
>>>> to Linus just yet. If mainline is broken for you it can't be caused by
>>>> this patch.
>>> Aaahh. My fault then. The suspend/resume issue is cause by commit
>>> 38ba34a43dbc ("Input: cros_ec_keyb - mark cros_ec_keyb driver as wake
>>> enabled device."), which has been merged to v4.18-rc1.
>>>
>>> It looks that I've downloaded wrong patch from the patchwork to reply it
>>> with a a bug report. :( I'm really sorry for the noise in the wrong thread.
>>>
>>> Ravi: please let me know how can I help you to debug this issue.
>>>
>>>>> Linux -next from 20180803, which has a few
>>>>> more patches for cros_ec_keyb suffers from the same issue.
>>>> Just to confirm, if you revert only this patch from -next you get
>>>> suspend/resume back?
>>>>
>>>> Thanks.
>>> Best regards
>>> --
>>> Marek Szyprowski, PhD
>>> Samsung R&D Institute Poland
>>>
>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
       [not found]                     ` <85a59afc-9dc0-b9fb-7e8f-32731337884c@samsung.com>
@ 2018-08-10  8:23                       ` Marek Szyprowski
  2018-08-17 21:21                         ` RaviChandra Sadineni
  0 siblings, 1 reply; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-10  8:23 UTC (permalink / raw)
  To: Ravi Chandra Sadineni
  Cc: Dmitry Torokhov, Ravi Chandra Sadineni, Todd Broch, linux-kernel,
	linux-input, linux-samsung-soc, Tomasz Figa

Hi Ravi,

Just to let you know - I hope I've finally bisected all the issues related
to suspend/resume on Samsung Chromebooks with mainline kernel. I did my
tests on Linux next-20180809. The mentioned commit 38ba34a43dbc ("Input:
cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.") breaks
suspend/resume operation also on Samsung Exynos5420-based Peach-Pit
Chromebook. Here is some more information how to get suspend/resume
working with mainline on that board:
https://patchwork.kernel.org/patch/10562419/

Best regards
Marek Szyprowski, PhD
Samsung R&D Institute Poland

On 2018-08-08 07:03, Marek Szyprowski wrote:
> Hi Ravi,
>
> On 2018-08-07 23:59, Ravi Chandra Sadineni wrote:
>> hi Merek,
>>
>> I tried booting a snow device and could not get it to boot it to the
>> console. I assume i don't have right kernel config. Can you share your
>> config if possible.
>
> I use standard exynos_defconfig bundled with Linux kernel. I've followed
> this instruction to boot in on Snow:
>
> https://s-opensource.org/2016/03/24/use-mainline-u-boot-non-signed-kernels-exynos-chromebooks/ 
>
>
>>
>> Thanks,
>> RaviOn Mon, Aug 6, 2018 at 4:05 PM Ravi Chandra Sadineni
>> <ravisadineni@chromium.org> wrote:
>>> Hi Merek,
>>>
>>> Thanks for the info. Lemme understand what's going on. Will update the
>>> thread once I have more info.
>>>
>>> Thanks,
>>> Ravi
>>> On Mon, Aug 6, 2018 at 12:15 AM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> Hi Dmitry
>>>>
>>>> On 2018-08-06 08:16, Dmitry Torokhov wrote:
>>>>> On Sun, Aug 5, 2018 at 10:29 PM Marek Szyprowski
>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>> Hi Ravi,
>>>>>>
>>>>>> On 2018-08-03 18:53, Ravi Chandra Sadineni wrote:
>>>>>>> Understood. I am trying to reproduce this issue locally. Wanted to
>>>>>>> know the version of the kernel so I can give a try. Marek, can you
>>>>>>> please confirm the kernel version.
>>>>>>>
>>>>>> Yes, sorry for the missing context, I was in hurry writing the 
>>>>>> report and
>>>>>> I wanted to send it before leaving the office. I'm testing 
>>>>>> mainline on Snow
>>>>>> with exynos_defconfig.
>>>>>>
>>>>>> Suspend/resume is partially broken already with mainline, but if 
>>>>>> you disable
>>>>>> CPUfreq support, it works fine on Linux v4.17.
>>>>>>
>>>>>> I've posted CPUfreq related fixes here if you are interested:
>>>>>> https://patchwork.kernel.org/patch/10554607/
>>>>>> https://patchwork.kernel.org/patch/10554603/
>>>>>>
>>>>>> The issue with cros_ec_keyb patch appears first on Linux 
>>>>>> v4.18-rc1, which is
>>>>>> the first release with that patch.
>>>>> Marek, this patch should only be in -next, I do not believe I sent it
>>>>> to Linus just yet. If mainline is broken for you it can't be 
>>>>> caused by
>>>>> this patch.
>>>> Aaahh. My fault then. The suspend/resume issue is cause by commit
>>>> 38ba34a43dbc ("Input: cros_ec_keyb - mark cros_ec_keyb driver as wake
>>>> enabled device."), which has been merged to v4.18-rc1.
>>>>
>>>> It looks that I've downloaded wrong patch from the patchwork to 
>>>> reply it
>>>> with a a bug report. :( I'm really sorry for the noise in the wrong 
>>>> thread.
>>>>
>>>> Ravi: please let me know how can I help you to debug this issue.
>>>>
>>>>>> Linux -next from 20180803, which has a few
>>>>>> more patches for cros_ec_keyb suffers from the same issue.
>>>>> Just to confirm, if you revert only this patch from -next you get
>>>>> suspend/resume back?
>>>>>
>>>>> Thanks.
>>>> Best regards
>>>> -- 
>>>> Marek Szyprowski, PhD
>>>> Samsung R&D Institute Poland
>>>>
>>
>
> Best regards


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-10  8:23                       ` Marek Szyprowski
@ 2018-08-17 21:21                         ` RaviChandra Sadineni
  2018-08-20  8:52                           ` Marek Szyprowski
  0 siblings, 1 reply; 13+ messages in thread
From: RaviChandra Sadineni @ 2018-08-17 21:21 UTC (permalink / raw)
  To: dmitry.torokhov, ravisadineni, ravisadineni, dtor,
	linux-samsung-soc, tbroch, linux-kernel, linux-input, tfiga

From: RaviChandra Sadineni <ravisadineni@google.com>

hi Merek,

Unfortunately I could not get the device to boot even after using the exynos_defconfig. 
Can you please try this patch and see if this fixes the issue. If not can you enable the
debug logs and send me the logs.


Currently on every resume we check for mkbp events and notify the
clients. This helps in identifying the wakeup sources. But on devices
that do not support mkbp protocol, we might end up getting key state of
the keyboard in a loop and block the resume. Instead check for events only
if  mkbp is supported.

Signed-off-by: RaviChandra Sadineni <ravisadineni@chromium.org>
---
 drivers/mfd/cros_ec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 65a9757a6d21..fe6f83766144 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -218,7 +218,8 @@ EXPORT_SYMBOL(cros_ec_suspend);
 
 static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
 {
-	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
+	while (ec_dev->mkbp_event_supported &&
+	       cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
 					     1, ec_dev);
 }
-- 
2.16.4


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: Input: cros_ec_keyb: Remove check before calling pm_wakeup_event.
  2018-08-17 21:21                         ` RaviChandra Sadineni
@ 2018-08-20  8:52                           ` Marek Szyprowski
  0 siblings, 0 replies; 13+ messages in thread
From: Marek Szyprowski @ 2018-08-20  8:52 UTC (permalink / raw)
  To: RaviChandra Sadineni, dmitry.torokhov, ravisadineni, dtor,
	linux-samsung-soc, tbroch, linux-kernel, linux-input, tfiga

Hi Ravi,

On 2018-08-17 23:21, RaviChandra Sadineni wrote:
> From: RaviChandra Sadineni <ravisadineni@google.com>
>
> hi Merek,
>
> Unfortunately I could not get the device to boot even after using the exynos_defconfig.
> Can you please try this patch and see if this fixes the issue. If not can you enable the
> debug logs and send me the logs.
>
>
> Currently on every resume we check for mkbp events and notify the
> clients. This helps in identifying the wakeup sources. But on devices
> that do not support mkbp protocol, we might end up getting key state of
> the keyboard in a loop and block the resume. Instead check for events only
> if  mkbp is supported.
>
> Signed-off-by: RaviChandra Sadineni <ravisadineni@chromium.org>

This patch fixes the suspend/resume issue on Snow and Peach-Pit
Chromebooks, both on vanilla v4.18 as well as linux-next from 20 August 
2018.

Thanks!

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

A small hint: to merge it please resend with proper subject and put the note
should be after '---' mark, so it will be dropped by the 'git am' command.

> ---
>   drivers/mfd/cros_ec.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
> index 65a9757a6d21..fe6f83766144 100644
> --- a/drivers/mfd/cros_ec.c
> +++ b/drivers/mfd/cros_ec.c
> @@ -218,7 +218,8 @@ EXPORT_SYMBOL(cros_ec_suspend);
>   
>   static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
>   {
> -	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
> +	while (ec_dev->mkbp_event_supported &&
> +	       cros_ec_get_next_event(ec_dev, NULL) > 0)
>   		blocking_notifier_call_chain(&ec_dev->event_notifier,
>   					     1, ec_dev);
>   }

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2018-08-20  8:52 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-05 22:44 [PATCH] Input: cros_ec_keyb: Remove check before calling pm_wakeup_event Ravi Chandra Sadineni
2018-06-12 23:32 ` Dmitry Torokhov
     [not found] ` <CGME20180803072628eucas1p26abe0cb121b974401759502f8807bb96@eucas1p2.samsung.com>
2018-08-03  7:26   ` Marek Szyprowski
     [not found]     ` <CAEZbON7qLheHFuU6zwArCz=CG03JvnFjcehBGjE4RqROYrMLhQ@mail.gmail.com>
2018-08-03 16:07       ` Dmitry Torokhov
     [not found]         ` <CAEZbON4O0X8Fo6eAbmPOSiB1_Tw7x+Ox3ROoGfZQn72uQGQLkg@mail.gmail.com>
2018-08-06  5:29           ` Marek Szyprowski
2018-08-06  6:16             ` Dmitry Torokhov
2018-08-06  7:15               ` Marek Szyprowski
2018-08-06 23:05                 ` Ravi Chandra Sadineni
2018-08-07 21:59                   ` Ravi Chandra Sadineni
2018-08-08  5:03                     ` Marek Szyprowski
     [not found]                     ` <85a59afc-9dc0-b9fb-7e8f-32731337884c@samsung.com>
2018-08-10  8:23                       ` Marek Szyprowski
2018-08-17 21:21                         ` RaviChandra Sadineni
2018-08-20  8:52                           ` Marek Szyprowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).