From: Jonathan Bakker <xc-racer2@live.ca>
To: kgene@kernel.org, krzk@kernel.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Jonathan Bakker <xc-racer2@live.ca>
Subject: [PATCH 10/13] arm: dts: s5pv210: aries: Enable ADC node
Date: Sun, 26 Apr 2020 11:36:01 -0700 [thread overview]
Message-ID: <BN6PR04MB0660998092302F2A78065E79A3AE0@BN6PR04MB0660.namprd04.prod.outlook.com> (raw)
In-Reply-To: <20200426183604.28494-1-xc-racer2@live.ca>
On aries boards, the ADC is used for things such as jack detection
and battery temperature monitoring. It is connected to ldo4 of max8998,
so only enable that regulator when we are actually using the ADC.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index f30bdcb9c083..a103ddb0d720 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -193,11 +193,6 @@
regulator-name = "VADC_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
};
ldo5_reg: LDO5 {
@@ -530,6 +525,12 @@
};
};
+&adc {
+ vdd-supply = <&ldo4_reg>;
+
+ status = "okay";
+};
+
&fimd {
pinctrl-names = "default";
pinctrl-0 = <&lcd_clk &lcd_data24>;
--
2.20.1
next prev parent reply other threads:[~2020-04-26 18:36 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200426183604.28494-1-xc-racer2@live.ca>
2020-04-26 18:35 ` [PATCH 01/13] arm: dts: s5pv210: Add helper define for sleep gpio config Jonathan Bakker
2020-04-26 18:35 ` [PATCH 02/13] arm: dts: s5pv210: fascinate4g: Add sleep GPIO configuration Jonathan Bakker
2020-04-28 10:02 ` Krzysztof Kozlowski
2020-04-28 23:49 ` Jonathan Bakker
2020-05-01 13:10 ` Krzysztof Kozlowski
2020-04-26 18:35 ` [PATCH 03/13] arm: dts: s5pv210: galaxys: " Jonathan Bakker
2020-04-26 18:35 ` [PATCH 04/13] arm: dts: s5pv210: aries: Set keep-power-in-suspend for SDHCI1 Jonathan Bakker
2020-04-26 18:35 ` [PATCH 05/13] arm: dts: s5pv210: aries: Disable pulls on GPIO i2c adapters Jonathan Bakker
2020-04-26 18:35 ` [PATCH 06/13] arm: dts: s5pv210: aries: Add support for more devices Jonathan Bakker
2020-04-28 10:20 ` Krzysztof Kozlowski
2020-04-28 23:32 ` Jonathan Bakker
2020-05-01 13:31 ` Krzysztof Kozlowski
2020-05-01 19:43 ` Jonathan Bakker
2020-04-26 18:35 ` [PATCH 07/13] arm: dts: s5pv210: galaxys: Add si470x fmradio Jonathan Bakker
2020-04-26 18:35 ` [PATCH 08/13] arm: dts: s5pv210: aries: Disable pull for vibrator ena GPIO Jonathan Bakker
2020-04-26 18:36 ` [PATCH 09/13] arm: dts: s5pv210: Add an ADC node Jonathan Bakker
2020-04-28 10:26 ` Krzysztof Kozlowski
2020-04-28 22:27 ` Jonathan Bakker
2020-04-26 18:36 ` Jonathan Bakker [this message]
2020-04-28 10:29 ` [PATCH 10/13] arm: dts: s5pv210: aries: Enable " Krzysztof Kozlowski
2020-04-28 22:26 ` Jonathan Bakker
2020-04-26 18:36 ` [PATCH 11/13] arm: dts: s5pv210: Assign clocks to MMC devices Jonathan Bakker
2020-04-26 18:36 ` [PATCH 12/13] arm: dts: s5pv210: Correct FIMC definitions Jonathan Bakker
2020-04-28 10:32 ` Krzysztof Kozlowski
2020-04-28 22:31 ` Jonathan Bakker
2020-04-26 18:36 ` [PATCH 13/13] arm: dts: s5pv210: aries: Set MAX8998 GPIO pulls Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 00/18] S5PV210 and Aries DTS improvements Jonathan Bakker
2020-05-04 15:15 ` Krzysztof Kozlowski
[not found] ` <20200501235019.24022-1-xc-racer2@live.ca>
2020-05-01 23:50 ` [PATCH v2 01/18] ARM: dts: s5pv210: Add helper define for sleep gpio config Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 02/18] ARM: dts: s5pv210: Add sleep GPIO configuration for fascinate4g Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 03/18] ARM: dts: s5pv210: Add sleep GPIO configuration for galaxys Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 04/18] ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 05/18] ARM: dts: s5pv210: Disable pulls on GPIO i2c adapters for aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 06/18] ARM: dts: s5pv210: Add WM8994 support to aries boards Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 07/18] ARM: dts: s5pv210: Add FSA9480 support to Aries boards Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 08/18] ARM: dts: s5pv210: Add touchkey support to aries boards Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 09/18] ARM: dts: s5pv210: Add panel " Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 10/18] ARM: dts: s5pv210: Add remaining i2c-gpio adapters to aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 11/18] ARM: dts: s5pv210: Add si470x fmradio to galaxys Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 12/18] ARM: dts: s5pv210: Disable pull for vibrator ena GPIO on aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 13/18] ARM: dts: s5pv210: Add an ADC node Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 14/18] ARM: dts: s5pv210: Enable ADC on aries boards Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 15/18] ARM: dts: s5pv210: Assign clocks to MMC devices on aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 16/18] ARM: dts: s5pv210: Correct FIMC definitions Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 17/18] ARM: dts: s5pv210: Set MAX8998 GPIO pulls on aries Jonathan Bakker
2020-05-01 23:50 ` [PATCH v2 18/18] ARM: dts: s5pv210: Correct gpi gpio node name Jonathan Bakker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN6PR04MB0660998092302F2A78065E79A3AE0@BN6PR04MB0660.namprd04.prod.outlook.com \
--to=xc-racer2@live.ca \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).