linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 5.13 000/156] 5.13.5-rc1 review
@ 2021-07-22 16:29 Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 001/156] ARM: dts: gemini: rename mdio to the right name Greg Kroah-Hartman
                   ` (159 more replies)
  0 siblings, 160 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	lkft-triage, pavel, jonathanh, f.fainelli, stable

This is the start of the stable review cycle for the 5.13.5 release.
There are 156 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.13.5-rc1

Aaron Ma <aaron.ma@canonical.com>
    mt76: mt7921: continue to probe driver when fw already downloaded

Paolo Abeni <pabeni@redhat.com>
    udp: properly flush normal packet at GRO time

Eric Dumazet <edumazet@google.com>
    udp: annotate data races around unix_sk(sk)->gso_size

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Avoid padding in sensor message structure

Linus Walleij <linus.walleij@linaro.org>
    drm/panel: nt35510: Do not fail if DSI read fails

Riccardo Mancini <rickyman7@gmail.com>
    perf test bpf: Free obj_buf

John Fastabend <john.fastabend@gmail.com>
    bpf: Track subprog poke descriptors correctly and fix use-after-free

Gu Shengxian <gushengxian@yulong.com>
    bpftool: Properly close va_list 'ap' by va_end() on error

Wei Li <liwei391@huawei.com>
    tools: bpf: Fix error in 'make -C tools/ bpf_install'

Talal Ahmad <talalahmad@google.com>
    tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path

Eric Dumazet <edumazet@google.com>
    ipv6: tcp: drop silly ICMPv6 packet too big messages

Nguyen Dinh Phi <phind.uet@gmail.com>
    tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized

Eric Dumazet <edumazet@google.com>
    tcp: annotate data races around tp->mtu_info

Paolo Abeni <pabeni@redhat.com>
    tcp: consistently disable header prediction for mptcp

Andrew Jeffery <andrew@aj.id.au>
    ARM: dts: everest: Add phase corrections for eMMC

Andrew Jeffery <andrew@aj.id.au>
    ARM: dts: tacoma: Add phase corrections for eMMC

Joel Stanley <joel@jms.id.au>
    ARM: dts: aspeed: Fix AST2600 machines line names

Hans de Goede <hdegoede@redhat.com>
    vboxsf: Add support for the atomic_open directory-inode op

Hans de Goede <hdegoede@redhat.com>
    vboxsf: Add vboxsf_[create|release]_sf_handle() helpers

Hans de Goede <hdegoede@redhat.com>
    vboxsf: Make vboxsf_dir_create() return the handle for the created file

Hans de Goede <hdegoede@redhat.com>
    vboxsf: Honor excl flag to the dir-inode create op

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: do not suppress Kconfig prompts for silent build

Jason Ekstrand <jason@jlekstrand.net>
    dma-buf/sync_file: Don't leak fences on merge failure

Pavel Skripkin <paskripkin@gmail.com>
    net: fddi: fix UAF in fza_probe

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()

Taehee Yoo <ap420073@gmail.com>
    net: validate lwtstate->data before returning from skb_tunnel_info()

Antoine Tenart <atenart@kernel.org>
    net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache

Alexander Ovechkin <ovov@yandex-team.ru>
    net: send SYNACK packet with accepted fwmark

Pavel Skripkin <paskripkin@gmail.com>
    net: ti: fix UAF in tlan_remove_one

Pavel Skripkin <paskripkin@gmail.com>
    net: qcom/emac: fix UAF in emac_remove

Pavel Skripkin <paskripkin@gmail.com>
    net: moxa: fix UAF in moxart_mac_probe

Hangbin Liu <liuhangbin@gmail.com>
    net: ip_tunnel: fix mtu calculation for ETHER tunnel devices

Florian Fainelli <f.fainelli@gmail.com>
    net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

Taehee Yoo <ap420073@gmail.com>
    net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops

Lorenzo Bianconi <lorenzo@kernel.org>
    net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment

Wolfgang Bumiller <w.bumiller@proxmox.com>
    net: bridge: sync fdb to new unicast-filtering ports

Louis Peens <louis.peens@corigine.com>
    net/sched: act_ct: remove and free nf_table callbacks

Ronak Doshi <doshir@vmware.com>
    vmxnet3: fix cksum offload issues for tunnels with non-default udp ports

Colin Ian King <colin.king@canonical.com>
    netfilter: nf_tables: Fix dereference of null pointer flow

wenxu <wenxu@ucloud.cn>
    net/sched: act_ct: fix err check for nf_conntrack_confirm

Vasily Averin <vvs@virtuozzo.com>
    netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo

Vadim Fedorenko <vfedorenko@novek.ru>
    net: ipv6: fix return value of ip6_skb_dst_mtu

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear

Daniel Rosenberg <drosen@google.com>
    f2fs: Show casefolding support only when supported

Peter Xu <peterx@redhat.com>
    mm/userfaultfd: fix uffd-wp special cases for fork()

Peter Xu <peterx@redhat.com>
    mm/thp: simplify copying of huge zero page pmd when fork

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "mm/shmem: fix shmem_swapin() race with swapoff"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "swap: fix do_swap_page() race with swapoff"

Pali Rohár <pali@kernel.org>
    arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file

Pali Rohár <pali@kernel.org>
    firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string

Paulo Alcantara <pc@cjr.nz>
    cifs: prevent NULL deref in cifs_compose_mount_options()

Heiko Carstens <hca@linux.ibm.com>
    s390: introduce proper type handling call_on_stack() macro

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/traps: do not test MONITOR CALL without CONFIG_BUG

Dmitry Osipenko <digetx@gmail.com>
    thermal/core/thermal_of: Stop zone device before unregistering it

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel/uncore: Clean up error handling path of iio mapping

Odin Ugedal <odin@uged.al>
    sched/fair: Fix CFS bandwidth hrtimer expiry type

Javed Hasan <jhasan@marvell.com>
    scsi: qedf: Add check to synchronize abort and flush

Javed Hasan <jhasan@marvell.com>
    scsi: libfc: Fix array index out of bound exception

Yufen Yu <yuyufen@huawei.com>
    scsi: libsas: Add LUN number check in .slave_alloc callback

Colin Ian King <colin.king@canonical.com>
    scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8

Krzysztof Kozlowski <krzk@kernel.org>
    rtc: max77686: Do not enforce (incorrect) interrupt trigger type

Konstantin Porotchkin <kostap@marvell.com>
    arch/arm64/boot/dts/marvell: fix NAND partitioning scheme

Matthias Maennich <maennich@google.com>
    kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set

Konrad Dybcio <konrad.dybcio@somainline.org>
    arm64: dts: qcom: sm8150: Disable Adreno and modem by default

Konrad Dybcio <konrad.dybcio@somainline.org>
    arm64: dts: qcom: sm8250: Fix pcie2_lane unit address

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    thermal/drivers/sprd: Add missing of_node_put for loop iteration

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    thermal/drivers/imx_sc: Add missing of_node_put for loop iteration

Geert Uytterhoeven <geert+renesas@glider.be>
    thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1

Yang Yingliang <yangyingliang@huawei.com>
    thermal/core: Correct function name thermal_zone_device_unregister()

Dong Aisheng <aisheng.dong@nxp.com>
    arm64: dts: imx8: conn: fix enet clock setting

Lucas Stach <l.stach@pengutronix.de>
    arm64: dts: imx8mq: assign PCIe clocks

Adam Ford <aford173@gmail.com>
    arm64: dts: imx8mn-beacon-som: Assign PMIC clock

Mian Yousaf Kaukab <ykaukab@suse.de>
    arm64: dts: ls208xa: remove bus-num from dspi node

Punit Agrawal <punitagrawal@gmail.com>
    arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory

Thierry Reding <treding@nvidia.com>
    firmware: tegra: bpmp: Fix Tegra234-only builds

Thierry Reding <treding@nvidia.com>
    soc/tegra: fuse: Fix Tegra234-only builds

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured

Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
    arm64: dts: qcom: sc7180: Add wakeup delay for adau codec

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix stpmic node for stm32mp1 boards

Marek Vasut <marex@denx.de>
    ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM

Marek Vasut <marex@denx.de>
    ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM

Marek Vasut <marex@denx.de>
    ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM

Grzegorz Szymaszek <gszymaszek@short.pl>
    ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings

Johan Jonker <jbx6244@gmail.com>
    ARM: dts: rockchip: fix supply properties in io-domains nodes

Sudeep Holla <sudeep.holla@arm.com>
    arm64: dts: juno: Update SCPI nodes as per the YAML schema

Yang Yingliang <yangyingliang@huawei.com>
    i3c: master: svc: drop free_irq of devm_request_irq allocated irq

Stefan Wahren <stefan.wahren@i2se.com>
    ARM: dts: bcm283x: Fix up GPIO LED node names

Stefan Wahren <stefan.wahren@i2se.com>
    ARM: dts: bcm283x: Fix up MMC node names

Santosh Puranik <santosh.puranik@in.ibm.com>
    ARM: dts: aspeed: Everest: Fix cable card PCA chips

Sudeep Holla <sudeep.holla@arm.com>
    firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected

Etienne Carriere <etienne.carriere@linaro.org>
    firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig

Dmitry Osipenko <digetx@gmail.com>
    memory: tegra: Fix compilation warnings on 64bit platforms

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix RCC node name on stm32f429 MCU

Alexandre Torgue <alexandre.torgue@foss.st.com>
    ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards

Grzegorz Szymaszek <gszymaszek@short.pl>
    ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin

Marek Vasut <marex@denx.de>
    ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2

Marek Vasut <marex@denx.de>
    ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2

Sujit Kautkar <sujitka@chromium.org>
    arm64: dts: qcom: sc7180: Move rmtfs memory region

Jonathan Marek <jonathan@marek.ca>
    arm64: dts: qcom: sm8250: fix display nodes

Konrad Dybcio <konrad.dybcio@somainline.org>
    arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)

Vinod Koul <vkoul@kernel.org>
    arm64: dts: qcom: sm8350: fix the node unit addresses

Dmitry Osipenko <digetx@gmail.com>
    ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant

Dmitry Osipenko <digetx@gmail.com>
    ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees

Grygorii Strashko <grygorii.strashko@ti.com>
    arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction

Jon Hunter <jonathanh@nvidia.com>
    arm64: tegra: Add PMU node for Tegra194

Suman Anna <s-anna@ti.com>
    ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names

Grygorii Strashko <grygorii.strashko@ti.com>
    ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios

Grygorii Strashko <grygorii.strashko@ti.com>
    ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios

Grygorii Strashko <grygorii.strashko@ti.com>
    ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: sink stdout from cmd for silent build

Adam Ford <aford173@gmail.com>
    arm64: dts: renesas: beacon: Fix USB ref clock references

Adam Ford <aford173@gmail.com>
    arm64: dts: renesas: beacon: Fix USB extal reference

Bixuan Cui <cuibixuan@huawei.com>
    rtc: mxc_v2: add missing MODULE_DEVICE_TABLE

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: ux500: Fix orientation of Janice accelerometer

Oleksij Rempel <linux@rempel-privat.de>
    ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: ux500: Fix some compatible strings

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: ux500: Fix orientation of accelerometer

Sebastian Reichel <sebastian.reichel@collabora.com>
    ARM: dts: ux500: Rename gpio-controller node

Sebastian Reichel <sebastian.reichel@collabora.com>
    ARM: dts: ux500: Fix interrupt cells

Johan Jonker <jbx6244@gmail.com>
    arm64: dts: rockchip: fix regulator-gpio states array

Jonathan Neuschäfer <j.neuschaefer@gmx.net>
    ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info

Primoz Fiser <primoz.fiser@norik.com>
    ARM: dts: imx6: phyFLEX: Fix UART hardware flow control

Zou Wei <zou_wei@huawei.com>
    soc: mediatek: add missing MODULE_DEVICE_TABLE

Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
    soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'

Rafał Miłecki <rafal@milecki.pl>
    ARM: dts: BCM5301X: Fix pinmux subnodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: dts: Hurricane 2: Fix NAND nodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: dts: BCM63xx: Fix NAND nodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: NSP: dts: fix NAND nodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: Cygnus: dts: fix NAND nodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: brcmstb: dts: fix NAND nodes names

Rafał Miłecki <rafal@milecki.pl>
    ARM: dts: BCM5301X: Fix NAND nodes names

Philipp Zabel <p.zabel@pengutronix.de>
    reset: ti-syscon: fix to_ti_syscon_reset_data macro

Elaine Zhang <zhangqing@rock-chips.com>
    arm64: dts: rockchip: Fix power-controller node names for rk3399

Elaine Zhang <zhangqing@rock-chips.com>
    arm64: dts: rockchip: Fix power-controller node names for rk3328

Elaine Zhang <zhangqing@rock-chips.com>
    arm64: dts: rockchip: Fix power-controller node names for px30

Elaine Zhang <zhangqing@rock-chips.com>
    ARM: dts: rockchip: Fix power-controller node names for rk3288

Elaine Zhang <zhangqing@rock-chips.com>
    ARM: dts: rockchip: Fix power-controller node names for rk3188

Elaine Zhang <zhangqing@rock-chips.com>
    ARM: dts: rockchip: Fix power-controller node names for rk3066a

Benjamin Gaignard <benjamin.gaignard@collabora.com>
    ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x

Ezequiel Garcia <ezequiel@collabora.com>
    ARM: dts: rockchip: Fix the timer clocks order

Johan Jonker <jbx6244@gmail.com>
    arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi

Peter Robinson <pbrobinson@gmail.com>
    arm64: dts: rockchip: Use only supported PCIe link speed on rk3399

Johan Jonker <jbx6244@gmail.com>
    ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288

Ezequiel Garcia <ezequiel@collabora.com>
    ARM: dts: rockchip: Fix thermal sensor cells o rk322x

Corentin Labbe <clabbe@baylibre.com>
    ARM: dts: gemini: add device_type on pci

Corentin Labbe <clabbe@baylibre.com>
    ARM: dts: gemini: rename mdio to the right name


-------------

Diffstat:

 Makefile                                           |  13 +-
 arch/arm/boot/dts/am335x-baltos.dtsi               |   4 +-
 arch/arm/boot/dts/am335x-evmsk.dts                 |   2 +-
 arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi  |   2 +-
 arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi  |   2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi                   |   2 +-
 arch/arm/boot/dts/am437x-gp-evm.dts                |   5 +-
 arch/arm/boot/dts/am437x-l4.dtsi                   |   2 +-
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts          |  13 +-
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts       | 169 ++++++++++-----------
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts       |   5 +-
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts        |   6 +-
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   2 +-
 arch/arm/boot/dts/bcm-hr2.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm-nsp.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts              |   4 +-
 arch/arm/boot/dts/bcm2711.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts           |   4 +-
 arch/arm/boot/dts/bcm2835-rpi-a.dts                |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |   4 +-
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts           |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts                |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi             |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           |   2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts             |   2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |   2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts              |   4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts         |   4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts         |   4 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts              |   2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi             |   2 +-
 arch/arm/boot/dts/bcm283x.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts       |   4 +-
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      |   4 +-
 arch/arm/boot/dts/bcm47094.dtsi                    |   2 +-
 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi           |   4 +-
 arch/arm/boot/dts/bcm5301x.dtsi                    |   8 +-
 arch/arm/boot/dts/bcm63138.dtsi                    |   2 +-
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts         |   4 +-
 arch/arm/boot/dts/bcm7445.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm911360_entphn.dts             |   4 +-
 arch/arm/boot/dts/bcm953012k.dts                   |   4 +-
 arch/arm/boot/dts/bcm958300k.dts                   |   4 +-
 arch/arm/boot/dts/bcm958305k.dts                   |   4 +-
 arch/arm/boot/dts/bcm958522er.dts                  |   4 +-
 arch/arm/boot/dts/bcm958525er.dts                  |   4 +-
 arch/arm/boot/dts/bcm958525xmc.dts                 |   4 +-
 arch/arm/boot/dts/bcm958622hr.dts                  |   4 +-
 arch/arm/boot/dts/bcm958623hr.dts                  |   4 +-
 arch/arm/boot/dts/bcm958625hr.dts                  |   4 +-
 arch/arm/boot/dts/bcm958625k.dts                   |   4 +-
 arch/arm/boot/dts/bcm963138dvt.dts                 |   4 +-
 arch/arm/boot/dts/bcm988312hr.dts                  |   4 +-
 arch/arm/boot/dts/dm816x.dtsi                      |   2 +-
 arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi         |   6 +-
 arch/arm/boot/dts/dra7-l4.dtsi                     |   4 +-
 arch/arm/boot/dts/dra72x.dtsi                      |   6 +-
 arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi        |   2 +-
 arch/arm/boot/dts/dra74x.dtsi                      |   8 +-
 arch/arm/boot/dts/gemini-dlink-dns-313.dts         |   2 +-
 arch/arm/boot/dts/gemini-nas4220b.dts              |   2 +-
 arch/arm/boot/dts/gemini-rut1xx.dts                |   2 +-
 arch/arm/boot/dts/gemini-wbd111.dts                |   2 +-
 arch/arm/boot/dts/gemini-wbd222.dts                |   2 +-
 arch/arm/boot/dts/gemini.dtsi                      |   1 +
 arch/arm/boot/dts/imx6dl-riotboard.dts             |   2 +
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi       |   5 +-
 arch/arm/boot/dts/omap4-l4.dtsi                    |   4 +-
 arch/arm/boot/dts/omap5-l4.dtsi                    |   4 +-
 arch/arm/boot/dts/rk3036-kylin.dts                 |   2 +-
 arch/arm/boot/dts/rk3066a.dtsi                     |   6 +-
 arch/arm/boot/dts/rk3188.dtsi                      |  14 +-
 arch/arm/boot/dts/rk322x.dtsi                      |  12 +-
 arch/arm/boot/dts/rk3288-rock2-som.dtsi            |   2 +-
 arch/arm/boot/dts/rk3288-vyasa.dts                 |   4 +-
 arch/arm/boot/dts/rk3288.dtsi                      |  14 +-
 arch/arm/boot/dts/ste-ab8500.dtsi                  |  28 ++--
 arch/arm/boot/dts/ste-ab8505.dtsi                  |  24 +--
 arch/arm/boot/dts/ste-href-ab8500.dtsi             |   2 +-
 arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi      |   3 +
 arch/arm/boot/dts/ste-href.dtsi                    |   2 +-
 arch/arm/boot/dts/ste-snowball.dts                 |   2 +-
 arch/arm/boot/dts/ste-ux500-samsung-golden.dts     |   3 +-
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts     |  11 +-
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts     |   3 +-
 arch/arm/boot/dts/stm32429i-eval.dts               |   8 +-
 arch/arm/boot/dts/stm32746g-eval.dts               |   6 +-
 arch/arm/boot/dts/stm32f429-disco.dts              |   6 +-
 arch/arm/boot/dts/stm32f429.dtsi                   |  10 +-
 arch/arm/boot/dts/stm32f469-disco.dts              |   6 +-
 arch/arm/boot/dts/stm32f746.dtsi                   |  12 +-
 arch/arm/boot/dts/stm32f769-disco.dts              |   6 +-
 arch/arm/boot/dts/stm32h743.dtsi                   |   4 -
 arch/arm/boot/dts/stm32mp151.dtsi                  |  12 +-
 ...m32mp157a-microgea-stm32mp1-microdev2.0-of7.dts |   2 +-
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi       |   7 +-
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi     |   7 +-
 arch/arm/boot/dts/stm32mp157c-odyssey.dts          |   2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi      |   7 +-
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi       |   9 +-
 arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi       |   2 +-
 arch/arm/boot/dts/stm32mp15xx-osd32.dtsi           |   7 +-
 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts    |   2 +-
 arch/arm/boot/dts/tegra20-harmony.dts              |   2 +-
 arch/arm/boot/dts/tegra20-medcom-wide.dts          |   2 +-
 arch/arm/boot/dts/tegra20-plutux.dts               |   2 +-
 arch/arm/boot/dts/tegra20-seaboard.dts             |   2 +-
 arch/arm/boot/dts/tegra20-tec.dts                  |   2 +-
 arch/arm/boot/dts/tegra20-ventana.dts              |   2 +-
 .../dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi   |   2 +-
 arch/arm/boot/dts/tegra30-cardhu.dtsi              |   2 +-
 arch/arm/mach-imx/suspend-imx53.S                  |   4 +-
 arch/arm/mach-omap2/pm33xx-core.c                  |  40 +++++
 arch/arm64/boot/dts/arm/juno-base.dtsi             |   6 +-
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |   1 -
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi    |  50 +++---
 .../boot/dts/freescale/imx8mn-beacon-som.dtsi      |   3 +
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  16 ++
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |   6 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |   8 +
 arch/arm64/boot/dts/marvell/cn9130-db.dts          |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |  14 ++
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |   7 +-
 arch/arm64/boot/dts/qcom/sc7180-idp.dts            |   2 +-
 .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi |   1 +
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts            |  10 +-
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts            |  10 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |   6 +
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |   6 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |   6 +-
 .../boot/dts/renesas/beacon-renesom-baseboard.dtsi |   4 +-
 .../arm64/boot/dts/renesas/beacon-renesom-som.dtsi |   6 +-
 arch/arm64/boot/dts/rockchip/px30.dtsi             |  16 +-
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts     |   4 +-
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts |   4 +-
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     |   4 +-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |   6 +-
 .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi      |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi       |   4 +-
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi   |   1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi |   1 -
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |  44 +++---
 .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi     |   1 -
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     |   2 +-
 .../boot/dts/ti/k3-j7200-common-proc-board.dts     |   2 +-
 .../boot/dts/ti/k3-j721e-common-proc-board.dts     |   2 +-
 arch/s390/include/asm/stacktrace.h                 |  97 ++++++++++++
 arch/s390/kernel/traps.c                           |   2 +
 arch/x86/events/intel/uncore_snbep.c               |   6 +-
 arch/x86/net/bpf_jit_comp.c                        |   3 +
 drivers/dma-buf/sync_file.c                        |  13 +-
 drivers/firmware/Kconfig                           |   2 +-
 drivers/firmware/arm_scmi/common.h                 |   2 +-
 drivers/firmware/arm_scmi/driver.c                 |   2 +
 drivers/firmware/arm_scmi/sensors.c                |   6 +-
 drivers/firmware/tegra/Makefile                    |   1 +
 drivers/firmware/tegra/bpmp-private.h              |   3 +-
 drivers/firmware/tegra/bpmp.c                      |   3 +-
 drivers/firmware/turris-mox-rwtm.c                 |   1 +
 drivers/gpu/drm/panel/panel-novatek-nt35510.c      |   4 +-
 drivers/i3c/master/svc-i3c-master.c                |   1 -
 drivers/memory/tegra/tegra124-emc.c                |   4 +-
 drivers/memory/tegra/tegra30-emc.c                 |   4 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  22 ++-
 drivers/net/dsa/mv88e6xxx/serdes.c                 |   6 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |  23 +--
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |   6 -
 drivers/net/ethernet/marvell/mvneta.c              |  20 +--
 drivers/net/ethernet/moxa/moxart_ether.c           |   4 +-
 drivers/net/ethernet/qualcomm/emac/emac.c          |   3 +-
 drivers/net/ethernet/ti/tlan.c                     |   3 +-
 drivers/net/fddi/defza.c                           |   3 +-
 drivers/net/netdevsim/ipsec.c                      |   8 +-
 drivers/net/vmxnet3/vmxnet3_ethtool.c              |  22 ++-
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c    |   3 +-
 drivers/reset/reset-ti-syscon.c                    |   4 +-
 drivers/rtc/rtc-max77686.c                         |   4 +-
 drivers/rtc/rtc-mxc_v2.c                           |   1 +
 drivers/scsi/aic7xxx/aic7xxx_core.c                |   2 +-
 drivers/scsi/aic94xx/aic94xx_init.c                |   1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c             |   1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c             |   1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |   1 +
 drivers/scsi/isci/init.c                           |   1 +
 drivers/scsi/libfc/fc_rport.c                      |  13 +-
 drivers/scsi/libsas/sas_scsi_host.c                |   9 ++
 drivers/scsi/mvsas/mv_init.c                       |   1 +
 drivers/scsi/pm8001/pm8001_init.c                  |   1 +
 drivers/scsi/qedf/qedf_io.c                        |  22 ++-
 drivers/soc/bcm/brcmstb/common.c                   |   5 -
 drivers/soc/mediatek/mtk-devapc.c                  |   1 +
 drivers/soc/tegra/fuse/fuse-tegra30.c              |   3 +-
 drivers/thermal/imx_sc_thermal.c                   |   3 +
 drivers/thermal/rcar_gen3_thermal.c                |   5 +-
 drivers/thermal/sprd_thermal.c                     |  15 +-
 drivers/thermal/thermal_core.c                     |   2 +-
 drivers/thermal/thermal_of.c                       |   3 +
 fs/cifs/cifs_dfs_ref.c                             |   3 +
 fs/f2fs/sysfs.c                                    |   4 +
 fs/vboxsf/dir.c                                    |  76 +++++++--
 fs/vboxsf/file.c                                   |  71 +++++----
 fs/vboxsf/vfsmod.h                                 |   7 +
 include/linux/bpf.h                                |   1 +
 include/linux/huge_mm.h                            |   2 +-
 include/linux/swap.h                               |   9 --
 include/linux/swapops.h                            |   2 +
 include/net/dst_metadata.h                         |   4 +-
 include/net/ip6_route.h                            |   2 +-
 include/net/tcp.h                                  |   4 +
 kernel/bpf/core.c                                  |   8 +-
 kernel/bpf/verifier.c                              |  60 +++-----
 kernel/sched/fair.c                                |   4 +-
 mm/huge_memory.c                                   |  36 +++--
 mm/memory.c                                        |  36 ++---
 mm/shmem.c                                         |  14 +-
 net/bridge/br_if.c                                 |  17 ++-
 net/core/dev.c                                     |   2 +
 net/dsa/switch.c                                   |   4 +-
 net/ipv4/ip_tunnel.c                               |  18 ++-
 net/ipv4/tcp.c                                     |   3 +
 net/ipv4/tcp_input.c                               |   2 +-
 net/ipv4/tcp_ipv4.c                                |   4 +-
 net/ipv4/tcp_output.c                              |   1 +
 net/ipv4/udp.c                                     |   6 +-
 net/ipv4/udp_offload.c                             |   6 +-
 net/ipv6/tcp_ipv6.c                                |  21 ++-
 net/ipv6/udp.c                                     |   2 +-
 net/ipv6/xfrm6_output.c                            |   2 +-
 net/netfilter/nf_conntrack_netlink.c               |   3 +
 net/netfilter/nf_tables_api.c                      |   3 +-
 net/sched/act_ct.c                                 |  14 +-
 scripts/Kbuild.include                             |   7 +-
 scripts/mkcompile_h                                |  14 +-
 tools/bpf/Makefile                                 |   7 +-
 tools/bpf/bpftool/jit_disasm.c                     |   6 +-
 tools/perf/tests/bpf.c                             |   2 +
 237 files changed, 1113 insertions(+), 729 deletions(-)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 001/156] ARM: dts: gemini: rename mdio to the right name
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 002/156] ARM: dts: gemini: add device_type on pci Greg Kroah-Hartman
                   ` (158 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Corentin Labbe, Linus Walleij, Sasha Levin

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit fc5b59b945b546e27977e99a5ca6fe61179ff0d2 ]

ethernet-phy is not the right name for mdio, fix it.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
 arch/arm/boot/dts/gemini-nas4220b.dts      | 2 +-
 arch/arm/boot/dts/gemini-rut1xx.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd111.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd222.dts        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..b8acc6eaaa6d 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..13112a8a5dd8 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 08091d2a64e1..0ebda4efd9d0 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 002/156] ARM: dts: gemini: add device_type on pci
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 001/156] ARM: dts: gemini: rename mdio to the right name Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 003/156] ARM: dts: rockchip: Fix thermal sensor cells o rk322x Greg Kroah-Hartman
                   ` (157 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Corentin Labbe, Linus Walleij, Sasha Levin

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit 483f3645b3f7acfd1c78a19d51b80c0656161974 ]

Fixes DT warning on pci node by adding the missing device_type.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..07448c03dac9 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 003/156] ARM: dts: rockchip: Fix thermal sensor cells o rk322x
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 001/156] ARM: dts: gemini: rename mdio to the right name Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 002/156] ARM: dts: gemini: add device_type on pci Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 004/156] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Greg Kroah-Hartman
                   ` (156 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Heiko Stuebner, Sasha Levin

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit d5c24e20daf09587cbc221d40be1ba92673e8d94 ]

The number of cells to be used with a thermal sensor specifier
must be "1". Fix this.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210506175514.168365-2-ezequiel@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk322x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 208f21245095..9f02ba7a0cc2 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -517,7 +517,7 @@
 		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
 		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
 	};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 004/156] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (2 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 003/156] ARM: dts: rockchip: Fix thermal sensor cells o rk322x Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 005/156] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 Greg Kroah-Hartman
                   ` (155 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Johan Jonker, Heiko Stuebner, Sasha Levin

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
 arch/arm/boot/dts/rk3288.dtsi      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b827ea2f..e817eba8c622 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 05557ad02b33..24b903240cb3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1582,7 +1582,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 005/156] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (3 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 004/156] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 006/156] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Greg Kroah-Hartman
                   ` (154 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Peter Robinson, Heiko Stuebner, Sasha Levin

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 954d5986afa50c178ea7554e6abdd611d08f5ade ]

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210413141709.845592-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 16fd58c4a80f..8c0ff6c96e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -510,7 +510,6 @@
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 7d0a7c697703..b28888ea9262 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -474,7 +474,6 @@
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index c0074b3ed4af..01d1a75c8b4d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -329,7 +329,6 @@
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 006/156] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (4 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 005/156] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 007/156] ARM: dts: rockchip: Fix the timer clocks order Greg Kroah-Hartman
                   ` (153 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Johan Jonker, Heiko Stuebner, Sasha Levin

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit a7ecfad495f8af63a5cb332c91f60ab2018897f5 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 634a91af8e83..7c1b69f3a4c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2354,7 +2354,7 @@
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 007/156] ARM: dts: rockchip: Fix the timer clocks order
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (5 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 006/156] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 008/156] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Greg Kroah-Hartman
                   ` (152 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Heiko Stuebner, Sasha Levin

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 7b46d674ac000b101fdad92cf16cc11d90b72f86 ]

Fixed order is the device-tree convention.
The timer driver currently gets clocks by name,
so no changes are needed there.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 8 ++++----
 arch/arm/boot/dts/rk3288.dtsi | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d840ba..2c08ae60e4a1 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 24b903240cb3..1e6594f8a293 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -196,8 +196,8 @@
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 008/156] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (6 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 007/156] ARM: dts: rockchip: Fix the timer clocks order Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 009/156] ARM: dts: rockchip: Fix power-controller node names for rk3066a Greg Kroah-Hartman
                   ` (151 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Benjamin Gaignard, Heiko Stuebner,
	Sasha Levin

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

[ Upstream commit 6b023929666f0be5df75f5e0278d1b70effadf42 ]

Add '#" to iommu-cells properties.
Remove useless interrupt-names properties

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk322x.dtsi | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 9f02ba7a0cc2..25f83f2f5618 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -558,10 +558,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -569,10 +568,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -602,7 +600,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -623,10 +620,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 009/156] ARM: dts: rockchip: Fix power-controller node names for rk3066a
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (7 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 008/156] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 010/156] ARM: dts: rockchip: Fix power-controller node names for rk3188 Greg Kroah-Hartman
                   ` (150 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit f2948781a72f0d8cf2adf31758c357f2f35e6c79 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 252750c97f97..bbc3bff50856 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -755,7 +755,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -782,7 +782,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -791,7 +791,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 010/156] ARM: dts: rockchip: Fix power-controller node names for rk3188
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (8 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 009/156] ARM: dts: rockchip: Fix power-controller node names for rk3066a Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 011/156] ARM: dts: rockchip: Fix power-controller node names for rk3288 Greg Kroah-Hartman
                   ` (149 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2c08ae60e4a1..b6bde9d12c2b 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -699,7 +699,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -721,7 +721,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -730,7 +730,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 011/156] ARM: dts: rockchip: Fix power-controller node names for rk3288
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (9 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 010/156] ARM: dts: rockchip: Fix power-controller node names for rk3188 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 012/156] arm64: dts: rockchip: Fix power-controller node names for px30 Greg Kroah-Hartman
                   ` (148 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 1e6594f8a293..d6dbfbd99568 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -765,7 +765,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -807,7 +807,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -821,7 +821,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -832,7 +832,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 012/156] arm64: dts: rockchip: Fix power-controller node names for px30
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (10 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 011/156] ARM: dts: rockchip: Fix power-controller node names for rk3288 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 013/156] arm64: dts: rockchip: Fix power-controller node names for rk3328 Greg Kroah-Hartman
                   ` (147 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d5de0d688ac6e0202674577b05d0726b8a6af401 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 09baa8a167ce..2b43c3d72dd9 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -244,20 +244,20 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -265,7 +265,7 @@
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -278,14 +278,14 @@
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -301,7 +301,7 @@
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -312,7 +312,7 @@
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 013/156] arm64: dts: rockchip: Fix power-controller node names for rk3328
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (11 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 012/156] arm64: dts: rockchip: Fix power-controller node names for px30 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 014/156] arm64: dts: rockchip: Fix power-controller node names for rk3399 Greg Kroah-Hartman
                   ` (146 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 6e6a282b49c6db408d27231e3c709fbdf25e3c1b ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 3ed69ecbcf3c..d2d8b675c9e9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -300,13 +300,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pd_hevc@RK3328_PD_HEVC {
+			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 			};
-			pd_video@RK3328_PD_VIDEO {
+			power-domain@RK3328_PD_VIDEO {
 				reg = <RK3328_PD_VIDEO>;
 			};
-			pd_vpu@RK3328_PD_VPU {
+			power-domain@RK3328_PD_VPU {
 				reg = <RK3328_PD_VPU>;
 				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 			};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 014/156] arm64: dts: rockchip: Fix power-controller node names for rk3399
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (12 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 013/156] arm64: dts: rockchip: Fix power-controller node names for rk3328 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 015/156] reset: ti-syscon: fix to_ti_syscon_reset_data macro Greg Kroah-Hartman
                   ` (145 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Elaine Zhang, Enric Balletbo i Serra,
	Johan Jonker, Heiko Stuebner, Sasha Levin

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 148bbe29f9108812c6fedd8a228f9e1ed6b422f7 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-8-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 40 ++++++++++++------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7c1b69f3a4c1..1703817c7354 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -968,26 +968,26 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_CENTER */
-			pd_iep@RK3399_PD_IEP {
+			power-domain@RK3399_PD_IEP {
 				reg = <RK3399_PD_IEP>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru HCLK_IEP>;
 				pm_qos = <&qos_iep>;
 			};
-			pd_rga@RK3399_PD_RGA {
+			power-domain@RK3399_PD_RGA {
 				reg = <RK3399_PD_RGA>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru HCLK_RGA>;
 				pm_qos = <&qos_rga_r>,
 					 <&qos_rga_w>;
 			};
-			pd_vcodec@RK3399_PD_VCODEC {
+			power-domain@RK3399_PD_VCODEC {
 				reg = <RK3399_PD_VCODEC>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
 				pm_qos = <&qos_video_m0>;
 			};
-			pd_vdu@RK3399_PD_VDU {
+			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
 					 <&cru HCLK_VDU>;
@@ -996,94 +996,94 @@
 			};
 
 			/* These power domains are grouped by VD_GPU */
-			pd_gpu@RK3399_PD_GPU {
+			power-domain@RK3399_PD_GPU {
 				reg = <RK3399_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu>;
 			};
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_edp@RK3399_PD_EDP {
+			power-domain@RK3399_PD_EDP {
 				reg = <RK3399_PD_EDP>;
 				clocks = <&cru PCLK_EDP_CTRL>;
 			};
-			pd_emmc@RK3399_PD_EMMC {
+			power-domain@RK3399_PD_EMMC {
 				reg = <RK3399_PD_EMMC>;
 				clocks = <&cru ACLK_EMMC>;
 				pm_qos = <&qos_emmc>;
 			};
-			pd_gmac@RK3399_PD_GMAC {
+			power-domain@RK3399_PD_GMAC {
 				reg = <RK3399_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_sd@RK3399_PD_SD {
+			power-domain@RK3399_PD_SD {
 				reg = <RK3399_PD_SD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sd>;
 			};
-			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+			power-domain@RK3399_PD_SDIOAUDIO {
 				reg = <RK3399_PD_SDIOAUDIO>;
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
 			};
-			pd_tcpc0@RK3399_PD_TCPD0 {
+			power-domain@RK3399_PD_TCPD0 {
 				reg = <RK3399_PD_TCPD0>;
 				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
 					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
 			};
-			pd_tcpc1@RK3399_PD_TCPD1 {
+			power-domain@RK3399_PD_TCPD1 {
 				reg = <RK3399_PD_TCPD1>;
 				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
 					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
 			};
-			pd_usb3@RK3399_PD_USB3 {
+			power-domain@RK3399_PD_USB3 {
 				reg = <RK3399_PD_USB3>;
 				clocks = <&cru ACLK_USB3>;
 				pm_qos = <&qos_usb_otg0>,
 					 <&qos_usb_otg1>;
 			};
-			pd_vio@RK3399_PD_VIO {
+			power-domain@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				pd_hdcp@RK3399_PD_HDCP {
+				power-domain@RK3399_PD_HDCP {
 					reg = <RK3399_PD_HDCP>;
 					clocks = <&cru ACLK_HDCP>,
 						 <&cru HCLK_HDCP>,
 						 <&cru PCLK_HDCP>;
 					pm_qos = <&qos_hdcp>;
 				};
-				pd_isp0@RK3399_PD_ISP0 {
+				power-domain@RK3399_PD_ISP0 {
 					reg = <RK3399_PD_ISP0>;
 					clocks = <&cru ACLK_ISP0>,
 						 <&cru HCLK_ISP0>;
 					pm_qos = <&qos_isp0_m0>,
 						 <&qos_isp0_m1>;
 				};
-				pd_isp1@RK3399_PD_ISP1 {
+				power-domain@RK3399_PD_ISP1 {
 					reg = <RK3399_PD_ISP1>;
 					clocks = <&cru ACLK_ISP1>,
 						 <&cru HCLK_ISP1>;
 					pm_qos = <&qos_isp1_m0>,
 						 <&qos_isp1_m1>;
 				};
-				pd_vo@RK3399_PD_VO {
+				power-domain@RK3399_PD_VO {
 					reg = <RK3399_PD_VO>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					pd_vopb@RK3399_PD_VOPB {
+					power-domain@RK3399_PD_VOPB {
 						reg = <RK3399_PD_VOPB>;
 						clocks = <&cru ACLK_VOP0>,
 							 <&cru HCLK_VOP0>;
 						pm_qos = <&qos_vop_big_r>,
 							 <&qos_vop_big_w>;
 					};
-					pd_vopl@RK3399_PD_VOPL {
+					power-domain@RK3399_PD_VOPL {
 						reg = <RK3399_PD_VOPL>;
 						clocks = <&cru ACLK_VOP1>,
 							 <&cru HCLK_VOP1>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 015/156] reset: ti-syscon: fix to_ti_syscon_reset_data macro
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (13 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 014/156] arm64: dts: rockchip: Fix power-controller node names for rk3399 Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 016/156] ARM: dts: BCM5301X: Fix NAND nodes names Greg Kroah-Hartman
                   ` (144 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Philipp Zabel, Sasha Levin

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ]

The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.

Fixes a checkpatch --strict issue:

  CHECK: Macro argument reuse 'rcdev' - possible side-effects?
  #53: FILE: drivers/reset/reset-ti-syscon.c:53:
  +#define to_ti_syscon_reset_data(rcdev)	\
  +	container_of(rcdev, struct ti_syscon_reset_data, rcdev)

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-ti-syscon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
index 218370faf37b..2b92775d58f0 100644
--- a/drivers/reset/reset-ti-syscon.c
+++ b/drivers/reset/reset-ti-syscon.c
@@ -58,8 +58,8 @@ struct ti_syscon_reset_data {
 	unsigned int nr_controls;
 };
 
-#define to_ti_syscon_reset_data(rcdev)	\
-	container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+#define to_ti_syscon_reset_data(_rcdev)	\
+	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
 
 /**
  * ti_syscon_reset_assert() - assert device reset
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 016/156] ARM: dts: BCM5301X: Fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (14 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 015/156] reset: ti-syscon: fix to_ti_syscon_reset_data macro Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 017/156] ARM: brcmstb: dts: fix " Greg Kroah-Hartman
                   ` (143 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit b660269cba748dfd07eb5551a88ff34d5ea0b86e ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts      | 4 ++--
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts     | 4 ++--
 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi          | 4 ++--
 arch/arm/boot/dts/bcm5301x.dtsi                   | 2 +-
 arch/arm/boot/dts/bcm953012k.dts                  | 4 ++--
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
 6 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 8636600385fd..c81944cd6d0b 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -24,8 +24,8 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index e635a15041dd..a6e2aeb28675 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -25,8 +25,8 @@
 		      <0x88000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index 925a7c9ce5b7..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -6,8 +6,8 @@
  */
 
 / {
-	nand@18028000 {
-		nandcs: nandcs@0 {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
 			compatible = "brcm,nandcs";
 			reg = <0>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 86872e12c355..bf595269ed7f 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -501,7 +501,7 @@
 		reg = <0x18004000 0x14>;
 	};
 
-	nand: nand@18028000 {
+	nand_controller: nand-controller@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
 		reg-names = "nand", "iproc-idm", "iproc-ext";
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 046c59fb4846..de40bd59a5fa 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -49,8 +49,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 8060178b365d..a5a64d17d9ea 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -306,7 +306,7 @@
 			interrupt-names = "nand";
 			status = "okay";
 
-			nandcs: nandcs@0 {
+			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
 				reg = <0>;
 			};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 017/156] ARM: brcmstb: dts: fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (15 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 016/156] ARM: dts: BCM5301X: Fix NAND nodes names Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 018/156] ARM: Cygnus: " Greg Kroah-Hartman
                   ` (142 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 4 ++--
 arch/arm/boot/dts/bcm7445.dtsi             | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 018/156] ARM: Cygnus: dts: fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (16 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 017/156] ARM: brcmstb: dts: fix " Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 019/156] ARM: NSP: " Greg Kroah-Hartman
                   ` (141 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi      | 2 +-
 arch/arm/boot/dts/bcm911360_entphn.dts | 4 ++--
 arch/arm/boot/dts/bcm958300k.dts       | 4 ++--
 arch/arm/boot/dts/bcm958305k.dts       | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 0025c88f660c..8ecb7861ce10 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 019/156] ARM: NSP: dts: fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (17 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 018/156] ARM: Cygnus: " Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 020/156] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
                   ` (140 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi     | 2 +-
 arch/arm/boot/dts/bcm958522er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525xmc.dts | 4 ++--
 arch/arm/boot/dts/bcm958622hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958623hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625k.dts   | 4 ++--
 arch/arm/boot/dts/bcm988312hr.dts  | 4 ++--
 9 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b4d2cc70afb1..748df7955ae6 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -269,7 +269,7 @@
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 5443fc079e6e..1f73885ec274 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e1e3c26cef19..b6b9ca8b0972 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index f161ba2e7e5e..ecf426f6ad5d 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 83cb877d63db..8ca18da981ad 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 4e106ce1384a..9747378db531 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cda6cc281e18..0f92b773afb8 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index ffbff0014c65..9e984ca0e6df 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 3fd39c479a3c..5475dab8181d 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 020/156] ARM: dts: BCM63xx: Fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (18 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 019/156] ARM: NSP: " Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 021/156] ARM: dts: Hurricane 2: " Greg Kroah-Hartman
                   ` (139 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm63138.dtsi    | 2 +-
 arch/arm/boot/dts/bcm963138dvt.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 021/156] ARM: dts: Hurricane 2: Fix NAND nodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (19 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 020/156] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 022/156] ARM: dts: BCM5301X: Fix pinmux subnodes names Greg Kroah-Hartman
                   ` (138 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..84cda16f68a2 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 022/156] ARM: dts: BCM5301X: Fix pinmux subnodes names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (20 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 021/156] ARM: dts: Hurricane 2: " Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 023/156] soc: bcm: brcmstb: remove unused variable brcmstb_machine_match Greg Kroah-Hartman
                   ` (137 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
	Florian Fainelli, Sasha Levin

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit bb95d7d440fefd104c593d9cb20da6d34a474e97 ]

This matches pinmux-node.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm47094.dtsi | 2 +-
 arch/arm/boot/dts/bcm5301x.dtsi | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 2a8f7312d1be..6282363313e1 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -11,7 +11,7 @@
 &pinctrl {
 	compatible = "brcm,bcm4709-pinmux";
 
-	pinmux_mdio: mdio {
+	pinmux_mdio: mdio-pins {
 		groups = "mdio_grp";
 		function = "mdio";
 	};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index bf595269ed7f..f92089290ccd 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -458,18 +458,18 @@
 					function = "spi";
 				};
 
-				pinmux_i2c: i2c {
+				pinmux_i2c: i2c-pins {
 					groups = "i2c_grp";
 					function = "i2c";
 				};
 
-				pinmux_pwm: pwm {
+				pinmux_pwm: pwm-pins {
 					groups = "pwm0_grp", "pwm1_grp",
 						 "pwm2_grp", "pwm3_grp";
 					function = "pwm";
 				};
 
-				pinmux_uart1: uart1 {
+				pinmux_uart1: uart1-pins {
 					groups = "uart1_grp";
 					function = "uart1";
 				};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 023/156] soc: bcm: brcmstb: remove unused variable brcmstb_machine_match
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (21 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 022/156] ARM: dts: BCM5301X: Fix pinmux subnodes names Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:29 ` [PATCH 5.13 024/156] soc: mediatek: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
                   ` (136 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Abaci Robot, Jiapeng Chong,
	Florian Fainelli, Sasha Levin

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit c1f512182c54dc87efd2f7ac19f16a49ff8bb19e ]

Fix the following clang warning:

drivers/soc/bcm/brcmstb/common.c:17:34: warning: unused variable
'brcmstb_machine_match' [-Wunused-const-variable].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/bcm/brcmstb/common.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index e87dfc6660f3..2a010881f4b6 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -14,11 +14,6 @@
 static u32 family_id;
 static u32 product_id;
 
-static const struct of_device_id brcmstb_machine_match[] = {
-	{ .compatible = "brcm,brcmstb", },
-	{ }
-};
-
 u32 brcmstb_get_family_id(void)
 {
 	return family_id;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 024/156] soc: mediatek: add missing MODULE_DEVICE_TABLE
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (22 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 023/156] soc: bcm: brcmstb: remove unused variable brcmstb_machine_match Greg Kroah-Hartman
@ 2021-07-22 16:29 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 025/156] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
                   ` (135 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:29 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hulk Robot, Zou Wei,
	Matthias Brugger, Sasha Levin

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit ba96de3ae5a7e2121cac80053b277eb2ab51a0ae ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705350-104687-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/mediatek/mtk-devapc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/mediatek/mtk-devapc.c b/drivers/soc/mediatek/mtk-devapc.c
index f1cea041dc5a..7c65ad3d1f8a 100644
--- a/drivers/soc/mediatek/mtk-devapc.c
+++ b/drivers/soc/mediatek/mtk-devapc.c
@@ -234,6 +234,7 @@ static const struct of_device_id mtk_devapc_dt_match[] = {
 	}, {
 	},
 };
+MODULE_DEVICE_TABLE(of, mtk_devapc_dt_match);
 
 static int mtk_devapc_probe(struct platform_device *pdev)
 {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 025/156] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (23 preceding siblings ...)
  2021-07-22 16:29 ` [PATCH 5.13 024/156] soc: mediatek: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 026/156] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
                   ` (134 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Primoz Fiser, Shawn Guo, Sasha Levin

From: Primoz Fiser <primoz.fiser@norik.com>

[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ]

Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.

Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7bd658b7bdda..f3236204cb5a 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -322,8 +322,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -410,6 +410,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 026/156] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (24 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 025/156] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 027/156] arm64: dts: rockchip: fix regulator-gpio states array Greg Kroah-Hartman
                   ` (133 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jonathan Neuschäfer,
	Fabio Estevam, Shawn Guo, Sasha Levin

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ]

The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c,
is imx5_cpu_suspend_info.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/suspend-imx53.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 027/156] arm64: dts: rockchip: fix regulator-gpio states array
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (25 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 026/156] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 028/156] ARM: dts: ux500: Fix interrupt cells Greg Kroah-Hartman
                   ` (132 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Johan Jonker, Heiko Stuebner, Sasha Levin

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit b82f8e2992534aab0fa762a37376be30df263701 ]

A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long

dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi         | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 3dddd4742c3a..665b2e69455d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -84,8 +84,8 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index f807bc066ccb..d5001d13e374 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -76,8 +76,8 @@
 		regulator-settling-time-us = <5000>;
 		regulator-type = "voltage";
 		startup-delay-us = <2000>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		vin-supply = <&vcc_io_33>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index a05732b59f38..a99979afd373 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -50,8 +50,8 @@
 	vcc_sdio: sdmmcio-regulator {
 		compatible = "regulator-gpio";
 		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		regulator-name = "vcc_sdio";
 		regulator-type = "voltage";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index beee5fbb3443..5d7a9d96d163 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@ pp1800_pcie: &pp1800_s0 {
 };
 
 &ppvar_sd_card_io {
-	states = <1800000 0x0 3300000 0x1>;
+	states = <1800000 0x0>, <3300000 0x1>;
 	regulator-max-microvolt = <3300000>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 4002742fed4c..c1bcc8ca3769 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -252,8 +252,8 @@
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 028/156] ARM: dts: ux500: Fix interrupt cells
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (26 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 027/156] arm64: dts: rockchip: fix regulator-gpio states array Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 029/156] ARM: dts: ux500: Rename gpio-controller node Greg Kroah-Hartman
                   ` (131 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sebastian Reichel, Linus Walleij,
	Sasha Levin

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ]

Fix interrupt cells in DT AB8500/AB8505 source files. The
compiled DTB files will stay the same.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ab8500.dtsi | 26 +++++++++++++-------------
 arch/arm/boot/dts/ste-ab8505.dtsi | 22 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index a16a00fb5fa5..f78b41002490 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -42,15 +42,15 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -219,13 +219,13 @@
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -242,8 +242,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index cc045b2fc217..3380afa74c14 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -39,8 +39,8 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
@@ -182,13 +182,13 @@
 
 				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -205,8 +205,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 029/156] ARM: dts: ux500: Rename gpio-controller node
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (27 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 028/156] ARM: dts: ux500: Fix interrupt cells Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 030/156] ARM: dts: ux500: Fix orientation of accelerometer Greg Kroah-Hartman
                   ` (130 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sebastian Reichel, Linus Walleij,
	Sasha Levin

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 4917b702818872fdf2a9973705af3aa7d3d1f19e ]

Rename the AB8500 gpio controller node from ab8500-gpio to
ab8500-gpiocontroller, since -gpio is a common suffix for
gpio consumers.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ab8500.dtsi      | 2 +-
 arch/arm/boot/dts/ste-ab8505.dtsi      | 2 +-
 arch/arm/boot/dts/ste-href-ab8500.dtsi | 2 +-
 arch/arm/boot/dts/ste-href.dtsi        | 2 +-
 arch/arm/boot/dts/ste-snowball.dts     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index f78b41002490..d0fe3f9aa183 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -34,7 +34,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpio {
+				ab8500_gpio: ab8500-gpiocontroller {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index 3380afa74c14..0defc15b9bbc 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -31,7 +31,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpio {
+				ab8505_gpio: ab8505-gpiocontroller {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743de7b9..3ccb7b5c7162 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 13d216192904..c97e8d29004f 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -209,7 +209,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 				};
 
 				ab8500_usb {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b344b3748143..40f1d7c9c1d4 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 030/156] ARM: dts: ux500: Fix orientation of accelerometer
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (28 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 029/156] ARM: dts: ux500: Rename gpio-controller node Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 031/156] ARM: dts: ux500: Fix some compatible strings Greg Kroah-Hartman
                   ` (129 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Linus Walleij, Sasha Levin

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 4beba4011995a2c44ee27e1d358dc32e6b9211b3 ]

This adds a mounting matrix to the accelerometer
on the TVK1281618 R3.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index 70f058352efc..511e097cc33e 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -89,6 +89,9 @@
 					     <19 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
 			};
 			magnetometer@1e {
 				compatible = "st,lsm303dlm-magn";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 031/156] ARM: dts: ux500: Fix some compatible strings
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (29 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 030/156] ARM: dts: ux500: Fix orientation of accelerometer Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 032/156] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Greg Kroah-Hartman
                   ` (128 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Linus Walleij, Sasha Levin

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 59ba546d1662c4beb738725965041f350afe24b4 ]

The Golden and Skomer phones have BCM4334 WLAN+BT chips,
so make the compatible strings reflect the new available
bindings for these.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 3 ++-
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 4 ++--
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 0d43ee6583cf..40df7c61bf69 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -121,7 +121,7 @@
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 
 				/* GPIO216 (WLAN_HOST_WAKE) */
@@ -162,6 +162,7 @@
 			pinctrl-1 = <&u0_a_1_sleep>;
 
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				/* GPIO222 (BT_VREG_ON) */
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index f24369873ce2..eaf8039d10ad 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -401,8 +401,7 @@
 			status = "okay";
 
 			wifi@1 {
-				/* Actually BRCM4330 */
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
@@ -436,6 +435,7 @@
 			status = "okay";
 
 			bluetooth {
+				/* BCM4330B1 actually */
 				compatible = "brcm,bcm4330-bt";
 				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index d28a00757d0b..94afd7a0fe1f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -211,7 +211,7 @@
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
@@ -247,6 +247,7 @@
 
 			/* FIXME: not quite working yet, probably needs regulators */
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 032/156] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (30 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 031/156] ARM: dts: ux500: Fix some compatible strings Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 033/156] ARM: dts: ux500: Fix orientation of Janice accelerometer Greg Kroah-Hartman
                   ` (127 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Oleksij Rempel, Andrew Lunn,
	Shawn Guo, Sasha Levin

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 723de6a4126b2474a8106e943749e1554012dad6 ]

Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 033/156] ARM: dts: ux500: Fix orientation of Janice accelerometer
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (31 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 032/156] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 034/156] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
                   ` (126 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Linus Walleij, Sasha Levin

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e409c1e1d5cb164361229e3a3f084e4a32544fb6 ]

This fixes up the axis on the Janice accelerometer to give
the right orientation according to tests.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index eaf8039d10ad..25af066f6f3a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -583,10 +583,9 @@
 					accelerometer@08 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
-						/* FIXME: no idea about this */
-						mount-matrix = "1", "0", "0",
-							       "0", "1", "0",
-							       "0", "0", "1";
+						mount-matrix = "0", "1", "0",
+							       "-1", "0", "0",
+							       "0", "0", "-1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 					};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 034/156] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (32 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 033/156] ARM: dts: ux500: Fix orientation of Janice accelerometer Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 035/156] arm64: dts: renesas: beacon: Fix USB extal reference Greg Kroah-Hartman
                   ` (125 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hulk Robot, Bixuan Cui,
	Alexandre Belloni, Sasha Levin

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 206e04ec7539e7bfdde9aa79a7cde656c9eb308e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mxc_v2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
index a577a74aaf75..5e0383401629 100644
--- a/drivers/rtc/rtc-mxc_v2.c
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -372,6 +372,7 @@ static const struct of_device_id mxc_ids[] = {
 	{ .compatible = "fsl,imx53-rtc", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mxc_ids);
 
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 035/156] arm64: dts: renesas: beacon: Fix USB extal reference
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (33 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 034/156] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 036/156] arm64: dts: renesas: beacon: Fix USB ref clock references Greg Kroah-Hartman
                   ` (124 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Adam Ford, Geert Uytterhoeven, Sasha Levin

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 56bc54496f5d6bc638127bfc9df3742cbf0039e7 ]

The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel.  Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 8d3a4d6ee885..bd3d26b2a2bb 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -319,8 +319,10 @@
 	status = "okay";
 };
 
-&usb_extal_clk {
-	clock-frequency = <50000000>;
+&usb2_clksel {
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		  <&versaclock5 3>, <&usb3s0_clk>;
+	status = "okay";
 };
 
 &usb3s0_clk {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 036/156] arm64: dts: renesas: beacon: Fix USB ref clock references
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (34 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 035/156] arm64: dts: renesas: beacon: Fix USB extal reference Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 037/156] kbuild: sink stdout from cmd for silent build Greg Kroah-Hartman
                   ` (123 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Adam Ford, Geert Uytterhoeven, Sasha Levin

From: Adam Ford <aford173@gmail.com>

[ Upstream commit ebc666f39ff67a01e748c34d670ddf05a9e45220 ]

The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers.  For the Beacon boards, this reference clock
is controlled by a programmable versaclock.  Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.

Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index d8046fedf9c1..e3c8b2fe143e 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
-	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 };
 
 &ehci1 {
 	status = "okay";
-	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 };
 
 &hdmi0 {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 037/156] kbuild: sink stdout from cmd for silent build
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (35 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 036/156] arm64: dts: renesas: beacon: Fix USB ref clock references Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 038/156] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Greg Kroah-Hartman
                   ` (122 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Sasha Levin

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 174a1dcc96429efce4ef7eb2f5c4506480da2182 ]

When building with 'make -s', no output to stdout should be printed.

As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.

I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.

Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.

[Note about this implementation]

'exec >/dev/null;' may look somewhat tricky, but this has a reason.

Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:

  cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null

... but it would not work if $(cmd_$(1)) itself contains a redirection.

For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.

It would be expanded into:

  echo "#include <asm-generic/$*.h>" > $@ >/dev/null

Then, the target file gets empty because the string will go to /dev/null
instead of $@.

Next, I tried this:

  cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null

The form above would be expanded into:

  { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null

This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.

When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:

  set -e;  { ; } >/dev/null

..., which causes an syntax error.

I also tried this:

  cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null

... but this causes a syntax error for the same reason.

So, finally I adopted:

  cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))

[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Kbuild.include | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 82dd1b65b7a8..f247e691562d 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -90,8 +90,13 @@ clean := -f $(srctree)/scripts/Makefile.clean obj
 echo-cmd = $(if $($(quiet)cmd_$(1)),\
 	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
 
+# sink stdout for 'make -s'
+       redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
 # printing commands
-cmd = @set -e; $(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
 
 ###
 # if_changed      - execute command if any prerequisite is newer than
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 038/156] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (36 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 037/156] kbuild: sink stdout from cmd for silent build Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 039/156] ARM: dts: am437x-gp-evm: " Greg Kroah-Hartman
                   ` (121 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grygorii Strashko, Tony Lindgren,
	Sasha Levin

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 5 ++---
 arch/arm/boot/dts/dra7-l4.dtsi            | 4 ++--
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..39eba2bc36dd 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -610,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 648d23f7f748..06e26182eabf 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1343,7 +1343,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1376,7 +1376,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 039/156] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (37 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 038/156] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 040/156] ARM: dts: am335x: " Greg Kroah-Hartman
                   ` (120 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grygorii Strashko, Tony Lindgren,
	Sasha Levin

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts |    5 ++++-
 arch/arm/boot/dts/am437x-l4.dtsi    |    2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -813,11 +813,14 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	p8 {
 		/*
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2070,7 +2070,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 040/156] ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (38 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 039/156] ARM: dts: am437x-gp-evm: " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 041/156] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names Greg Kroah-Hartman
                   ` (119 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grygorii Strashko, Tony Lindgren,
	Sasha Levin

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit d7d30b8fcd111e9feb171023c0e0c8d855582dcb ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-baltos.dtsi              | 4 ++--
 arch/arm/boot/dts/am335x-evmsk.dts                | 2 +-
 arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 2 +-
 arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi | 2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi                  | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 3ea286180382..1103a2cb836f 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index d5f8d5e2eb5d..45bf0273ecd8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -646,7 +646,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 039a9ab4c7ea..dcce5e3e001e 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1789,7 +1789,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 041/156] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (39 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 040/156] ARM: dts: am335x: " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 042/156] arm64: tegra: Add PMU node for Tegra194 Greg Kroah-Hartman
                   ` (118 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Suman Anna, Tony Lindgren, Sasha Levin

From: Suman Anna <s-anna@ti.com>

[ Upstream commit 9e7f5ee1137397def6580461e27e5efcb68183ee ]

A number of sub-mailbox node names in various OMAP2+ dts files are
currently using underscores. This is not adhering to the node name
convention, fix all of these to use hiphens.

These nodes are already using the prefix mbox, so they will be in
compliance with the sub-mailbox node name convention being added in
the OMAP Mailbox YAML binding as well.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts   | 8 ++++----
 arch/arm/boot/dts/dm816x.dtsi               | 2 +-
 arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi  | 6 +++---
 arch/arm/boot/dts/dra72x.dtsi               | 6 +++---
 arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi | 2 +-
 arch/arm/boot/dts/dra74x.dtsi               | 8 ++++----
 arch/arm/boot/dts/omap4-l4.dtsi             | 4 ++--
 arch/arm/boot/dts/omap5-l4.dtsi             | 4 ++--
 8 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 39eba2bc36dd..aed81568a297 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f3e934ef7d3e..90617261373c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index b4e07d99ffde..cfb39dde4930 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -145,12 +145,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -158,12 +158,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 99721673d7af..46b8f9efd413 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -600,11 +600,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index b148b289e830..06cc3a19ddaa 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -616,11 +616,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 042/156] arm64: tegra: Add PMU node for Tegra194
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (40 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 041/156] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 043/156] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction Greg Kroah-Hartman
                   ` (117 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jon Hunter, Thierry Reding, Sasha Levin

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit 9e79e58f330ea4860f2ced65a8a35dfb05fc03c1 ]

Populate the device-tree node for the PMU device on Tegra194. This also
fixes the following warning that is observed on booting Tegra194.

 ERR KERN kvm: pmu event creation failed -2

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9449156fae39..2e40b6047283 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -2345,6 +2345,20 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1
+				      &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		status = "okay";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 043/156] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (41 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 042/156] arm64: tegra: Add PMU node for Tegra194 Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 044/156] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees Greg Kroah-Hartman
                   ` (116 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grygorii Strashko,
	Vignesh Raghavendra, Nishanth Menon, Sasha Levin

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 69db725cdb2b803af67897a08ea54467d11f6020 ]

The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although
this does not make any difference functionality wise it's better to update
to avoid confusion.

Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output
in K3 am654x/j721e/j7200 board files.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210526132041.6104-1-grygorii.strashko@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts        | 2 +-
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +-
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1b947e2c2e74..faa8e280cf2b 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -136,7 +136,7 @@
 			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
 			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
 			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
-			AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
 			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
 		>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index bedd01b7a32c..d14f3c18b65f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -90,7 +90,7 @@
 			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index ffccbc53f1e7..de3c3f7f2b7a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -238,7 +238,7 @@
 			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 044/156] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (42 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 043/156] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 045/156] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant Greg Kroah-Hartman
                   ` (115 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Thierry Reding, Sasha Levin

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 5f45da704de425d74abd75feaa928fc8a3df03ba ]

All Tegra boards which use WM8903 audio codec are specifying a wrong
polarity for the headphones detection GPIO. The kernel driver hardcodes
the polarity to active-low, which is the correct polarity, so we can fix
the device-trees safely.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 2 +-
 arch/arm/boot/dts/tegra20-harmony.dts           | 2 +-
 arch/arm/boot/dts/tegra20-medcom-wide.dts       | 2 +-
 arch/arm/boot/dts/tegra20-plutux.dts            | 2 +-
 arch/arm/boot/dts/tegra20-seaboard.dts          | 2 +-
 arch/arm/boot/dts/tegra20-tec.dts               | 2 +-
 arch/arm/boot/dts/tegra20-ventana.dts           | 2 +-
 arch/arm/boot/dts/tegra30-cardhu.dtsi           | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 2298fc034183..14cd3238355b 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1030,7 +1030,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
 		nvidia,headset;
 
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb4d5a1..ae4312eedcbd 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -748,7 +748,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca30e522..b31c9bca16e6 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -84,7 +84,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2958b..5811b7006a9b 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a37613e..92d494b8c3d2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -911,7 +911,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60315de..10ff09d86efa 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 99a356c1ccec..5a2578b3707f 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -709,7 +709,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 2dff14b87f3e..d9dd11569d4b 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -630,7 +630,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 045/156] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (43 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 044/156] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 046/156] arm64: dts: qcom: sm8350: fix the node unit addresses Greg Kroah-Hartman
                   ` (114 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Svyatoslav Ryhel, Dmitry Osipenko,
	Thierry Reding, Sasha Levin

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit c4dd6066bc304649e3159f1c7a08ece25d537e00 ]

The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator.
Both regulators are always-on, nevertheless the DT model needs to be
corrected, fix it.

Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index b97da45ebdb4..e1325ee0a3c4 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -144,7 +144,7 @@
 	};
 
 	vdd_3v3_sys: regulator@1 {
-		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 046/156] arm64: dts: qcom: sm8350: fix the node unit addresses
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (44 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 045/156] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 047/156] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work) Greg Kroah-Hartman
                   ` (113 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Robert Foss, Vinod Koul,
	Bjorn Andersson, Sasha Levin

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ]

Some node unit addresses were put wrongly in the dts, resulting in
below warning when run with W=1

arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000"

Fix by correcting to the correct address as given in reg node

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51bc03ea..a2382eb8619b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -689,7 +689,7 @@
 			interrupt-controller;
 		};
 
-		tsens0: thermal-sensor@c222000 {
+		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
@@ -700,7 +700,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		tsens1: thermal-sensor@c223000 {
+		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
@@ -1176,7 +1176,7 @@
 			};
 		};
 
-		dc_noc: interconnect@90e0000 {
+		dc_noc: interconnect@90c0000 {
 			compatible = "qcom,sm8350-dc-noc";
 			reg = <0 0x090c0000 0 0x4200>;
 			#interconnect-cells = <1>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 047/156] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (45 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 046/156] arm64: dts: qcom: sm8350: fix the node unit addresses Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 048/156] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
                   ` (112 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Konrad Dybcio, Bjorn Andersson, Sasha Levin

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 0a275a35ceab07cb622ff212c54d6866e246ac53 ]

Fix the compatible to make the driver probe and tell the
driver where to look for the "xo" clock to make sure everything
works.

Then we get a happy (eh, happier) 8996:

somainline-sdcard:/home/konrad# cat /sys/kernel/debug/clk/pwrcl_pll/clk_rate
1152000000

Don't backport without "arm64: dts: qcom: msm8996: Add CPU opps", as
the system fails to boot without consumers for these clocks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210527192958.775434-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..dd89d3cb772b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1745,9 +1745,14 @@
 				};
 			};
 		};
+
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo";
+			clocks = <&xo_board>;
+
 			#clock-cells = <1>;
 		};
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 048/156] arm64: dts: qcom: sm8250: fix display nodes
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (46 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 047/156] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work) Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 049/156] arm64: dts: qcom: sc7180: Move rmtfs memory region Greg Kroah-Hartman
                   ` (111 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stephen Boyd, Jonathan Marek,
	Dmitry Baryshkov, Bjorn Andersson, Sasha Levin

From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit dc5d91250ae6b810bc8d599d8d6590a06a4ce84a ]

Use sm8250 compatibles instead of sdm845 compatibles

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12aaba6..75f9476109e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2370,7 +2370,7 @@
 		};
 
 		mdss: mdss@ae00000 {
-			compatible = "qcom,sdm845-mdss";
+			compatible = "qcom,sm8250-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
@@ -2402,7 +2402,7 @@
 			ranges;
 
 			mdss_mdp: mdp@ae01000 {
-				compatible = "qcom,sdm845-dpu";
+				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
 				      <0 0x0aeb0000 0 0x2008>;
 				reg-names = "mdp", "vbif";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 049/156] arm64: dts: qcom: sc7180: Move rmtfs memory region
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (47 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 048/156] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 050/156] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 Greg Kroah-Hartman
                   ` (110 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sibi Sankar, Sujit Kautkar,
	Bjorn Andersson, Sasha Levin

From: Sujit Kautkar <sujitka@chromium.org>

[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ]

Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..afe0f9c25816 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -45,7 +45,7 @@
 
 /* Increase the size from 2MB to 8MB */
 &rmtfs_mem {
-	reg = <0x0 0x84400000 0x0 0x800000>;
+	reg = <0x0 0x94600000 0x0 0x800000>;
 };
 
 / {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 050/156] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (48 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 049/156] arm64: dts: qcom: sc7180: Move rmtfs memory region Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 051/156] ARM: dts: stm32: Fix touchscreen node " Greg Kroah-Hartman
                   ` (109 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Alexandre Torgue,
	Patrice Chotard, Patrick Delaunay, linux-stm32, Alexandre Torgue,
	Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit 28b9a4679d8074512f12967497c161b992eb3b75 ]

Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5523f4138fd6..0fbf9913e8df 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -34,7 +34,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
@@ -60,7 +59,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
 
 		button-1 {
 			label = "TA2-GPIO-B";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 051/156] ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (49 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 050/156] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 052/156] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin Greg Kroah-Hartman
                   ` (108 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Alexandre Torgue,
	Patrice Chotard, Patrick Delaunay, linux-stm32, Alexandre Torgue,
	Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit 4b5fadef3fc2ab8863ffdf31eed6a745b1bf6e61 ]

Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06']

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 0fbf9913e8df..b8c8f0b284c3 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -182,8 +182,8 @@
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 052/156] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (50 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 051/156] ARM: dts: stm32: Fix touchscreen node " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 053/156] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Greg Kroah-Hartman
                   ` (107 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grzegorz Szymaszek, Alexandre Torgue,
	Sasha Levin

From: Grzegorz Szymaszek <gszymaszek@short.pl>

[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ]

The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-odyssey.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..be1dd5e9e744 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 053/156] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (51 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 052/156] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 054/156] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Greg Kroah-Hartman
                   ` (106 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ]

Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.

Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32429i-eval.dts  | 8 +++-----
 arch/arm/boot/dts/stm32746g-eval.dts  | 6 ++----
 arch/arm/boot/dts/stm32f429-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f469-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f769-disco.dts | 6 ++----
 5 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7e10ae744c9d..9ac1ffe53413 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -119,17 +119,15 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192449ee..327613fd9666 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b91ca1..075ac57d0bf4 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bbbe4b5..8c982ae79f43 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc20fa4..be943b701980 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 054/156] ARM: dts: stm32: fix RCC node name on stm32f429 MCU
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (52 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 053/156] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 055/156] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Greg Kroah-Hartman
                   ` (105 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ]

This prevent warning observed with "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format
error, expected "40023800"

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index f6530d724d00..41e0087bdbf9 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -709,7 +709,7 @@
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 055/156] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (53 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 054/156] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 056/156] memory: tegra: Fix compilation warnings on 64bit platforms Greg Kroah-Hartman
                   ` (104 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Fabrice Gasnier, Alexandre Torgue,
	Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ]

Prevent warning seen with "make dtbs_check W=1" command:

Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 --------
 arch/arm/boot/dts/stm32f746.dtsi | 8 --------
 arch/arm/boot/dts/stm32h743.dtsi | 4 ----
 3 files changed, 20 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 41e0087bdbf9..8748d5850298 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index e1df603fc981..72c1b76684b6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -531,8 +527,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 05ecdf9ff03a..6e42ca2dada2 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -485,8 +485,6 @@
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -501,8 +499,6 @@
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 056/156] memory: tegra: Fix compilation warnings on 64bit platforms
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (54 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 055/156] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 057/156] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig Greg Kroah-Hartman
                   ` (103 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, kernel test robot, Nathan Chancellor,
	Krzysztof Kozlowski, Dmitry Osipenko, Thierry Reding,
	Sasha Levin

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit e0740fb869730110b36a4afcf05ad1b9d6f5fb6d ]

Fix compilation warning on 64bit platforms caused by implicit promotion
of 32bit signed integer to a 64bit unsigned value which happens after
enabling compile-testing of the EMC drivers.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/tegra/tegra124-emc.c | 4 ++--
 drivers/memory/tegra/tegra30-emc.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 5699d909abc2..a21ca8e0841a 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -272,8 +272,8 @@
 #define EMC_PUTERM_ADJ				0x574
 
 #define DRAM_DEV_SEL_ALL			0
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 
 #define EMC_CFG_POWER_FEATURES_MASK		\
 	(EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index 829f6d673c96..a2f2738ccb94 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -150,8 +150,8 @@
 #define EMC_SELF_REF_CMD_ENABLED		BIT(0)
 
 #define DRAM_DEV_SEL_ALL			(0 << 30)
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 #define DRAM_BROADCAST(num) \
 	((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 057/156] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (55 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 056/156] memory: tegra: Fix compilation warnings on 64bit platforms Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 058/156] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected Greg Kroah-Hartman
                   ` (102 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Cristian Marussi, Etienne Carriere,
	Sudeep Holla, Sasha Levin

From: Etienne Carriere <etienne.carriere@linaro.org>

[ Upstream commit c05b07963e965ae34e75ee8c33af1095350cd87e ]

ARM_SCMI_PROTOCOL depends on either MAILBOX or HAVE_ARM_SMCCC_DISCOVERY,
not MAILBOX alone. Fix the depedency in Kconfig file and driver to
reflect the same.

Link: https://lore.kernel.org/r/20210521134055.24271-1-etienne.carriere@linaro.org
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[sudeep.holla: Minor tweaks to subject and change log]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/Kconfig           | 2 +-
 drivers/firmware/arm_scmi/common.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index db0ea2d2d75a..a9c613c32282 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@ menu "Firmware Drivers"
 config ARM_SCMI_PROTOCOL
 	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST
-	depends on MAILBOX
+	depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
 	help
 	  ARM System Control and Management Interface (SCMI) protocol is a
 	  set of operating system-independent software interfaces that are
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 228bf4a71d23..8685619d38f9 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -331,7 +331,7 @@ struct scmi_desc {
 };
 
 extern const struct scmi_desc scmi_mailbox_desc;
-#ifdef CONFIG_HAVE_ARM_SMCCC
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 extern const struct scmi_desc scmi_smc_desc;
 #endif
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 058/156] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (56 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 057/156] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 059/156] ARM: dts: aspeed: Everest: Fix cable card PCA chips Greg Kroah-Hartman
                   ` (101 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Etienne Carriere, Cristian Marussi,
	kernel test robot, Sudeep Holla, Sasha Levin

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit ab7766b72855e6a68109b915d071181b93086e29 ]

0day CI kernel test robot reported following build error with randconfig

aarch64-linux-ld: drivers/firmware/arm_scmi/driver.o:(.rodata+0x1e0):
		undefined reference to `scmi_mailbox_desc'

Fix the error by adding CONFIG_MAILBOX dependency for scmi_mailbox_desc.

Link: https://lore.kernel.org/r/20210603072631.1660963-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/driver.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index c2983ed53494..74986bf96656 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1575,7 +1575,9 @@ ATTRIBUTE_GROUPS(versions);
 
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
 #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 #endif
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 059/156] ARM: dts: aspeed: Everest: Fix cable card PCA chips
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (57 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 058/156] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 060/156] ARM: dts: bcm283x: Fix up MMC node names Greg Kroah-Hartman
                   ` (100 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eddie James, Santosh Puranik,
	Joel Stanley, Sasha Levin

From: Santosh Puranik <santosh.puranik@in.ibm.com>

[ Upstream commit 010da3daf9278ed03d38b7dcb0422f1a7df1bdd3 ]

Correct two PCA chips which were placed on the wrong I2C bus and
address.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 168 +++++++++----------
 1 file changed, 83 insertions(+), 85 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 3295c8c7c05c..27af28c8847d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -353,10 +353,47 @@
 
 &i2c1 {
 	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
 
-	pca2: pca9552@61 {
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
 		compatible = "nxp,pca9552";
-		reg = <0x61>;
+		reg = <0x65>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -424,12 +461,54 @@
 			reg = <9>;
 			type = <PCA955X_TYPE_GPIO>;
 		};
+	};
 
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
 	};
+};
 
-	pca3: pca9552@62 {
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
 		compatible = "nxp,pca9552";
-		reg = <0x62>;
+		reg = <0x66>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -512,87 +591,6 @@
 
 	};
 
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	power-supply@6a {
-		compatible = "ibm,cffps";
-		reg = <0x6a>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps";
-		reg = <0x6b>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
 	i2c-switch@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 060/156] ARM: dts: bcm283x: Fix up MMC node names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (58 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 059/156] ARM: dts: aspeed: Everest: Fix cable card PCA chips Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 061/156] ARM: dts: bcm283x: Fix up GPIO LED " Greg Kroah-Hartman
                   ` (99 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefan Wahren,
	Nicolas Saenz Julienne, Sasha Levin

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit f230c32349eb0a43a012a81c08a7f13859b86cbb ]

Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..d872064db761 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -413,7 +413,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..0f3be55201a5 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -420,7 +420,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 061/156] ARM: dts: bcm283x: Fix up GPIO LED node names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (59 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 060/156] ARM: dts: bcm283x: Fix up MMC node names Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 062/156] i3c: master: svc: drop free_irq of devm_request_irq allocated irq Greg Kroah-Hartman
                   ` (98 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefan Wahren,
	Nicolas Saenz Julienne, Sasha Levin

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ]

Fix the node names for the GPIO LEDs to conform to the standard node
name led-..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 2 +-
 15 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3b4ab947492a..27d2f859adfc 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -29,11 +29,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1b63d6b19750 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..33b2b77aa47d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..61010266ca9a 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 062/156] i3c: master: svc: drop free_irq of devm_request_irq allocated irq
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (60 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 061/156] ARM: dts: bcm283x: Fix up GPIO LED " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 063/156] arm64: dts: juno: Update SCPI nodes as per the YAML schema Greg Kroah-Hartman
                   ` (97 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
	Miquel Raynal, Alexandre Belloni, Sasha Levin

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 59a61e69c4252b4e8ecd15e752b0d2337f0121b7 ]

irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in svc_i3c_master_remove().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/svc-i3c-master.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 1f6ba4221817..eeb49b5d90ef 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1448,7 +1448,6 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	free_irq(master->irq, master);
 	clk_disable_unprepare(master->pclk);
 	clk_disable_unprepare(master->fclk);
 	clk_disable_unprepare(master->sclk);
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 063/156] arm64: dts: juno: Update SCPI nodes as per the YAML schema
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (61 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 062/156] i3c: master: svc: drop free_irq of devm_request_irq allocated irq Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 064/156] ARM: dts: rockchip: fix supply properties in io-domains nodes Greg Kroah-Hartman
                   ` (96 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sudeep Holla, Sasha Levin

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ]

The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.

Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 1cc7fdcec51b..8e7a66943b01 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -568,13 +568,13 @@
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
@@ -582,7 +582,7 @@
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 064/156] ARM: dts: rockchip: fix supply properties in io-domains nodes
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (62 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 063/156] arm64: dts: juno: Update SCPI nodes as per the YAML schema Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 065/156] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Greg Kroah-Hartman
                   ` (95 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Johan Jonker, Heiko Stuebner, Sasha Levin

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ]

A test with rockchip-io-domain.yaml gives notifications
for supply properties in io-domains nodes.
Fix them all into ".*-supply$" format.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +-
 arch/arm/boot/dts/rk3288-vyasa.dts      | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6f83b1..76363b8afcb9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8ed4ca0..b156a83eb7d7 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 065/156] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (63 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 064/156] ARM: dts: rockchip: fix supply properties in io-domains nodes Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 066/156] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Greg Kroah-Hartman
                   ` (94 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ]

Replace upper case by lower case in i2c nodes name.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f746.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 72c1b76684b6..014b416f57e6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -360,9 +360,9 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 066/156] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (64 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 065/156] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 067/156] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Greg Kroah-Hartman
                   ` (93 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ]

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index fcd3230c469b..23234f950de6 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1416,12 +1416,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1447,6 +1441,12 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb@5800c000 {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 067/156] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (65 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 066/156] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 068/156] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply Greg Kroah-Hartman
                   ` (92 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 11aaf2a0f8f070e87833775965950157bf57e49a ]

It prevents the following warning:

 pin-controller@50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts  | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 674b2d330dc4..5670b23812a2 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -89,7 +89,7 @@
 };
 
 &pinctrl {
-	ltdc_pins: ltdc {
+	ltdc_pins: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
 				 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 068/156] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (66 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 067/156] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 069/156] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM Greg Kroah-Hartman
                   ` (91 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grzegorz Szymaszek, Alexandre Torgue,
	Sasha Levin

From: Grzegorz Szymaszek <gszymaszek@short.pl>

[ Upstream commit f493162319788802b6a49634f7268e691b4c10ec ]

The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..b5601d270c8f 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -269,7 +269,7 @@
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 069/156] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (67 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 068/156] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 070/156] ARM: dts: stm32: Rename eth@N to ethernet@N " Greg Kroah-Hartman
                   ` (90 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Alexandre Torgue,
	Patrice Chotard, Patrick Delaunay, kernel, linux-stm32,
	Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit 5247a50c8b53ca214a488da648e1bb35c35c2597 ]

Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index b8c8f0b284c3..c5ea08fec535 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -187,7 +187,6 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
 	};
 };
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 070/156] ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (68 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 069/156] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 071/156] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N " Greg Kroah-Hartman
                   ` (89 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Alexandre Torgue,
	Patrice Chotard, Patrick Delaunay, kernel, linux-stm32,
	Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit b586250df24226f8a257e11e1f5953054c54fd35 ]

Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 31d08423a32f..c3e3466dacaa 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -150,7 +150,7 @@
 	pinctrl-1 = <&fmc_sleep_pins_b>;
 	status = "okay";
 
-	ksz8851: ks8851mll@1,0 {
+	ksz8851: ethernet@1,0 {
 		compatible = "micrel,ks8851-mll";
 		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
 		interrupt-parent = <&gpioc>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 071/156] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (69 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 070/156] ARM: dts: stm32: Rename eth@N to ethernet@N " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 072/156] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Greg Kroah-Hartman
                   ` (88 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Alexandre Torgue,
	Patrice Chotard, Patrick Delaunay, kernel, linux-stm32,
	Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit 9b8a9b389d8464e1ca5a4e92c6a4422844ad4ef3 ]

Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index c3e3466dacaa..8f4fd3a06a31 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -437,7 +437,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 013ae369791d..2b0ac605549d 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -198,7 +198,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 072/156] ARM: dts: stm32: fix stpmic node for stm32mp1 boards
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (70 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 071/156] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 073/156] arm64: dts: qcom: sc7180: Add wakeup delay for adau codec Greg Kroah-Hartman
                   ` (87 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Torgue, Sasha Levin

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 4bf4abe19089245b7b12f35e5cafb5477b3e2c48 ]

On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:

-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi   | 7 ++-----
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 5 +----
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi   | 5 +----
 arch/arm/boot/dts/stm32mp15xx-osd32.dtsi       | 7 ++-----
 4 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b2ef93..a4b14ef3caee 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index b5601d270c8f..2d9461006810 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +195,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +210,7 @@
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 8f4fd3a06a31..2af0a6752674 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -333,8 +333,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -356,7 +354,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -372,7 +369,7 @@
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +169,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +179,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 073/156] arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (71 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 072/156] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 074/156] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured Greg Kroah-Hartman
                   ` (86 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Douglas Anderson, Judy Hsiao,
	Srinivasa Rao Mandadapu, Bjorn Andersson, Sasha Levin

From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>

[ Upstream commit ba5f9b5d7ff3452e69275080c3d59265bc1db8ea ]

Add wakeup delay for fixing PoP noise during capture begin.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210513122429.25295-1-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 4c6e433c8226..3eb8550da1fc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -23,6 +23,7 @@ ap_h1_spi: &spi0 {};
 	adau7002: audio-codec-1 {
 		compatible = "adi,adau7002";
 		IOVDD-supply = <&pp1800_l15a>;
+		wakeup-delay-ms = <15>;
 		#sound-dai-cells = <0>;
 	};
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 074/156] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (72 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 073/156] arm64: dts: qcom: sc7180: Add wakeup delay for adau codec Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 075/156] soc/tegra: fuse: Fix Tegra234-only builds Greg Kroah-Hartman
                   ` (85 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dave Gerlach, Suman Anna,
	Tony Lindgren, Sasha Levin

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 093a474ce10d8ea3db3ef2922aca5a38f34bab1b ]

If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.

When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/pm33xx-core.c | 40 +++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0bcae5a..bf0d25fd2cea 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,44 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +376,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 075/156] soc/tegra: fuse: Fix Tegra234-only builds
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (73 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 074/156] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 076/156] firmware: tegra: bpmp: " Greg Kroah-Hartman
                   ` (84 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thierry Reding, Sasha Levin

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit e2d0ee225e49a5553986f3138dd2803852a31fd5 ]

The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/fuse/fuse-tegra30.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index 9ea7f0168457..c1aa7815bd6e 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -37,7 +37,8 @@
     defined(CONFIG_ARCH_TEGRA_132_SOC) || \
     defined(CONFIG_ARCH_TEGRA_210_SOC) || \
     defined(CONFIG_ARCH_TEGRA_186_SOC) || \
-    defined(CONFIG_ARCH_TEGRA_194_SOC)
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC)
 static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
 {
 	if (WARN_ON(!fuse->base))
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 076/156] firmware: tegra: bpmp: Fix Tegra234-only builds
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (74 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 075/156] soc/tegra: fuse: Fix Tegra234-only builds Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 077/156] arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory Greg Kroah-Hartman
                   ` (83 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thierry Reding, Sasha Levin

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit bd778b893963d67d7eb01f49d84ffcd3eaf229dd ]

The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/tegra/Makefile       | 1 +
 drivers/firmware/tegra/bpmp-private.h | 3 ++-
 drivers/firmware/tegra/bpmp.c         | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 49c87e00fafb..620cf3fdd607 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -3,6 +3,7 @@ tegra-bpmp-y			= bpmp.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC)	+= bpmp-tegra210.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
 obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
 obj-$(CONFIG_TEGRA_IVC)		+= ivc.o
diff --git a/drivers/firmware/tegra/bpmp-private.h b/drivers/firmware/tegra/bpmp-private.h
index 54d560c48398..182bfe396516 100644
--- a/drivers/firmware/tegra/bpmp-private.h
+++ b/drivers/firmware/tegra/bpmp-private.h
@@ -24,7 +24,8 @@ struct tegra_bpmp_ops {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
 #endif
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 0742a90cb844..5654c5e9862b 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -809,7 +809,8 @@ static const struct dev_pm_ops tegra_bpmp_pm_ops = {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 static const struct tegra_bpmp_soc tegra186_soc = {
 	.channels = {
 		.cpu_tx = {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 077/156] arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (75 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 076/156] firmware: tegra: bpmp: " Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 078/156] arm64: dts: ls208xa: remove bus-num from dspi node Greg Kroah-Hartman
                   ` (82 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexandru Elisei, Robin Murphy,
	Punit Agrawal, Heiko Stuebner, Sasha Levin

From: Punit Agrawal <punitagrawal@gmail.com>

[ Upstream commit 8efe01b4386ab38a36b99cfdc1dc02c38a8898c3 ]

The PCIe host bridge on RK3399 advertises a single 64-bit memory
address range even though it lies entirely below 4GB.

Previously the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), but since commit 9d57e61bf723 ("of/pci:
Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
the code takes a stricter view and treats the ranges as advertised in
the device tree (i.e, as 64-bit).

The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.

Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf723.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210607112856.3499682-5-punitagrawal@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 1703817c7354..7f8081f9e30e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -227,7 +227,7 @@
 		       <&pcie_phy 2>, <&pcie_phy 3>;
 		phy-names = "pcie-phy-0", "pcie-phy-1",
 			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
 			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
 		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
 			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 078/156] arm64: dts: ls208xa: remove bus-num from dspi node
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (76 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 077/156] arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 079/156] arm64: dts: imx8mn-beacon-som: Assign PMIC clock Greg Kroah-Hartman
                   ` (81 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mian Yousaf Kaukab, Shawn Guo, Sasha Levin

From: Mian Yousaf Kaukab <ykaukab@suse.de>

[ Upstream commit 8240c972c1798ea013cbb407722295fc826b3584 ]

On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:

[   10.471363] couldn't get idr
[   10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[   10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[   10.471708] fsl-dspi: probe of 2100000.spi failed with error -16

Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 135ac8210871..801ba9612d36 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -929,7 +929,6 @@
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
-			bus-num = <0>;
 		};
 
 		esdhc: esdhc@2140000 {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 079/156] arm64: dts: imx8mn-beacon-som: Assign PMIC clock
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (77 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 078/156] arm64: dts: ls208xa: remove bus-num from dspi node Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 080/156] arm64: dts: imx8mq: assign PCIe clocks Greg Kroah-Hartman
                   ` (80 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Adam Ford, Shawn Guo, Sasha Levin

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 1de3aa8611d21d6be546ca1cd13ee05bdd650018 ]

The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index c35eeaff958f..54eaf3d6055b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -120,6 +120,9 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
 
 		regulators {
 			buck1_reg: BUCK1 {
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 080/156] arm64: dts: imx8mq: assign PCIe clocks
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (78 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 079/156] arm64: dts: imx8mn-beacon-som: Assign PMIC clock Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 081/156] arm64: dts: imx8: conn: fix enet clock setting Greg Kroah-Hartman
                   ` (79 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lucas Stach, Shawn Guo, Sasha Levin

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ]

This fixes multiple issues with the current non-existent PCIe clock setup:

The controller can run at up to 250MHz, so use a parent that provides this
clock.

The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.

The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 17c449e12c2e..91df9c5350ae 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1383,6 +1383,14 @@
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
@@ -1413,6 +1421,14 @@
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 081/156] arm64: dts: imx8: conn: fix enet clock setting
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (79 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 080/156] arm64: dts: imx8mq: assign PCIe clocks Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 082/156] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
                   ` (78 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Abel Vesa, Stephen Boyd,
	Dong Aisheng, Shawn Guo, Sasha Levin

From: Dong Aisheng <aisheng.dong@nxp.com>

[ Upstream commit dfda1fd16aa71c839e4002109b0cd15f61105ebb ]

enet_clk_ref actually is sourced from internal gpr clocks
which needs a default rate. Also update enet lpcg clock
output names to be more straightforward.

Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 50 ++++++++++++-------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index e1e81ca0ca69..a79f42a9618e 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -77,9 +77,12 @@ conn_subsys: bus@5b000000 {
 			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
 			 <&enet0_lpcg IMX_LPCG_CLK_2>,
-			 <&enet0_lpcg IMX_LPCG_CLK_1>,
+			 <&enet0_lpcg IMX_LPCG_CLK_3>,
 			 <&enet0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
 		fsl,num-tx-queues=<3>;
 		fsl,num-rx-queues=<3>;
 		power-domains = <&pd IMX_SC_R_ENET_0>;
@@ -94,9 +97,12 @@ conn_subsys: bus@5b000000 {
 				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
 			 <&enet1_lpcg IMX_LPCG_CLK_2>,
-			 <&enet1_lpcg IMX_LPCG_CLK_1>,
+			 <&enet1_lpcg IMX_LPCG_CLK_3>,
 			 <&enet1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
 		fsl,num-tx-queues=<3>;
 		fsl,num-rx-queues=<3>;
 		power-domains = <&pd IMX_SC_R_ENET_1>;
@@ -152,15 +158,19 @@ conn_subsys: bus@5b000000 {
 		#clock-cells = <1>;
 		clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
 			 <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
-			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
 		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
-				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
-				<IMX_LPCG_CLK_5>;
-		clock-output-names = "enet0_ipg_root_clk",
-				     "enet0_tx_clk",
-				     "enet0_ahb_clk",
-				     "enet0_ipg_clk",
-				     "enet0_ipg_s_clk";
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet0_lpcg_timer_clk",
+				     "enet0_lpcg_txc_sampling_clk",
+				     "enet0_lpcg_ahb_clk",
+				     "enet0_lpcg_rgmii_txc_clk",
+				     "enet0_lpcg_ipg_clk",
+				     "enet0_lpcg_ipg_s_clk";
 		power-domains = <&pd IMX_SC_R_ENET_0>;
 	};
 
@@ -170,15 +180,19 @@ conn_subsys: bus@5b000000 {
 		#clock-cells = <1>;
 		clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
 			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
-			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
 		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
-				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
-				<IMX_LPCG_CLK_5>;
-		clock-output-names = "enet1_ipg_root_clk",
-				     "enet1_tx_clk",
-				     "enet1_ahb_clk",
-				     "enet1_ipg_clk",
-				     "enet1_ipg_s_clk";
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet1_lpcg_timer_clk",
+				     "enet1_lpcg_txc_sampling_clk",
+				     "enet1_lpcg_ahb_clk",
+				     "enet1_lpcg_rgmii_txc_clk",
+				     "enet1_lpcg_ipg_clk",
+				     "enet1_lpcg_ipg_s_clk";
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 	};
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 082/156] thermal/core: Correct function name thermal_zone_device_unregister()
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (80 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 081/156] arm64: dts: imx8: conn: fix enet clock setting Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 083/156] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 Greg Kroah-Hartman
                   ` (77 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yang Yingliang, Daniel Lezcano, Sasha Levin

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d20b25f40d19..142dcf5e4a18 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1369,7 +1369,7 @@ free_tz:
 EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 /**
- * thermal_device_unregister - removes the registered thermal zone device
+ * thermal_zone_device_unregister - removes the registered thermal zone device
  * @tz: the thermal zone device to remove
  */
 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 083/156] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (81 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 082/156] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:30 ` [PATCH 5.13 084/156] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration Greg Kroah-Hartman
                   ` (76 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven,
	Niklas Söderlund, Daniel Lezcano, Sasha Levin

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3ae5950db617d1cc3eb4eb55750fa9d138529b49 ]

With -Wshadow:

    drivers/thermal/rcar_gen3_thermal.c: In function ‘rcar_gen3_thermal_probe’:
    drivers/thermal/rcar_gen3_thermal.c:310:13: warning: declaration of ‘rcar_gen3_ths_tj_1’ shadows a global declaration [-Wshadow]
      310 |  const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
	  |             ^~~~~~~~~~~~~~~~~~
    drivers/thermal/rcar_gen3_thermal.c:246:18: note: shadowed declaration is here
      246 | static const int rcar_gen3_ths_tj_1 = 126;
	  |                  ^~~~~~~~~~~~~~~~~~

To add to the confusion, the local variable has a different type.

Fix the shadowing by renaming the local variable to ths_tj_1.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/9ea7e65d0331daba96f9a7925cb3d12d2170efb1.1623076804.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 1a60adb1d30a..fdf16aa34eb4 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -307,7 +307,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
+	const int *ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
 	int ret, i;
@@ -352,8 +352,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
-					     *rcar_gen3_ths_tj_1);
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 084/156] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (82 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 083/156] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 Greg Kroah-Hartman
@ 2021-07-22 16:30 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 085/156] thermal/drivers/sprd: " Greg Kroah-Hartman
                   ` (75 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:30 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Jacky Bai,
	Daniel Lezcano, Sasha Levin

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit 3da97620e8d60da4a7eaae46e03e0a494780642d ]

Early exits from for_each_available_child_of_node() should decrement the
node reference counter.  Reported by Coccinelle:

  drivers/thermal/imx_sc_thermal.c:93:1-33: WARNING:
    Function "for_each_available_child_of_node" should have of_node_put() before return around line 97.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210614192230.19248-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/imx_sc_thermal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index b01d28eca7ee..8d76dbfde6a9 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -93,6 +93,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(np, child) {
 		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
 		if (!sensor) {
+			of_node_put(child);
 			of_node_put(sensor_np);
 			return -ENOMEM;
 		}
@@ -104,6 +105,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get valid sensor resource id: %d\n",
 				ret);
+			of_node_put(child);
 			break;
 		}
 
@@ -114,6 +116,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 		if (IS_ERR(sensor->tzd)) {
 			dev_err(&pdev->dev, "failed to register thermal zone\n");
 			ret = PTR_ERR(sensor->tzd);
+			of_node_put(child);
 			break;
 		}
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 085/156] thermal/drivers/sprd: Add missing of_node_put for loop iteration
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (83 preceding siblings ...)
  2021-07-22 16:30 ` [PATCH 5.13 084/156] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 086/156] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address Greg Kroah-Hartman
                   ` (74 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Chunyan Zhang,
	Daniel Lezcano, Sasha Levin

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit d8ac5bb4ae653e092d7429a7587b73f1662d6ad7 ]

Early exits from for_each_available_child_of_node() should decrement the
node reference counter.  Reported by Coccinelle:

  drivers/thermal/sprd_thermal.c:387:1-23: WARNING:
    Function "for_each_child_of_node" should have of_node_put() before goto around lines 391.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210614192230.19248-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/sprd_thermal.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
index fe06cccf14b3..fff80fc18002 100644
--- a/drivers/thermal/sprd_thermal.c
+++ b/drivers/thermal/sprd_thermal.c
@@ -388,7 +388,7 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
 		if (!sen) {
 			ret = -ENOMEM;
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sen->data = thm;
@@ -397,13 +397,13 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		ret = of_property_read_u32(sen_child, "reg", &sen->id);
 		if (ret) {
 			dev_err(&pdev->dev, "get sensor reg failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
 		if (ret) {
 			dev_err(&pdev->dev, "efuse cal analysis failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sprd_thm_sensor_init(thm, sen);
@@ -416,19 +416,20 @@ static int sprd_thm_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "register thermal zone failed %d\n",
 				sen->id);
 			ret = PTR_ERR(sen->tzd);
-			goto disable_clk;
+			goto of_put;
 		}
 
 		thm->sensor[sen->id] = sen;
 	}
+	/* sen_child set to NULL at this point */
 
 	ret = sprd_thm_set_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	ret = sprd_thm_wait_temp_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	for (i = 0; i < thm->nr_sensors; i++)
 		sprd_thm_toggle_sensor(thm->sensor[i], true);
@@ -436,6 +437,8 @@ static int sprd_thm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, thm);
 	return 0;
 
+of_put:
+	of_node_put(sen_child);
 disable_clk:
 	clk_disable_unprepare(thm->clk);
 	return ret;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 086/156] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (84 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 085/156] thermal/drivers/sprd: " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 087/156] arm64: dts: qcom: sm8150: Disable Adreno and modem by default Greg Kroah-Hartman
                   ` (73 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Konrad Dybcio, Bjorn Andersson, Sasha Levin

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit dc2f86369b157dfe4dccd31497d2e3c541e7239d ]

The previous one was likely a mistaken copy from pcie1_lane.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613185334.306225-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 75f9476109e6..09b552396557 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1470,7 +1470,7 @@
 
 			status = "disabled";
 
-			pcie2_lane: lanes@1c0e200 {
+			pcie2_lane: lanes@1c16200 {
 				reg = <0 0x1c16200 0 0x170>, /* tx0 */
 				      <0 0x1c16400 0 0x200>, /* rx0 */
 				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 087/156] arm64: dts: qcom: sm8150: Disable Adreno and modem by default
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (85 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 086/156] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 088/156] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
                   ` (72 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Konrad Dybcio, Bjorn Andersson, Sasha Levin

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit b1dc3c6b3dabbedaf896a3c1a998da191c311c70 ]

Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.

Not enabling modem back on the HDK, as it uses a sa8150.

Also fixed a sorting mistake in both boards' dt while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150.dtsi    |  6 ++++++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d987a1..50ee3bb97325 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,7 +354,11 @@
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -372,6 +376,10 @@
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e63416..7de54b2e497e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,7 +349,11 @@
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -367,6 +371,10 @@
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 	firmware-name = "qcom/sm8150/adsp.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 51235a9521c2..618a1e64f808 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1082,6 +1082,8 @@
 
 			qcom,gmu = <&gmu>;
 
+			status = "disabled";
+
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
@@ -1149,6 +1151,8 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
+			status = "disabled";
+
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -1496,6 +1500,8 @@
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			status = "disabled";
+
 			glink-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 088/156] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (86 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 087/156] arm64: dts: qcom: sm8150: Disable Adreno and modem by default Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 089/156] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme Greg Kroah-Hartman
                   ` (71 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matthias Maennich, Masahiro Yamada,
	Sasha Levin

From: Matthias Maennich <maennich@google.com>

[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ]

To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.

If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.

Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.

[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html

Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mkcompile_h | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 4ae735039daf..a72b154de7b0 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -70,15 +70,23 @@ UTS_VERSION="$(echo $UTS_VERSION $CONFIG_FLAGS $TIMESTAMP | cut -b -$UTS_LEN)"
 # Only replace the real compile.h if the new one is different,
 # in order to preserve the timestamp and avoid unnecessary
 # recompilations.
-# We don't consider the file changed if only the date/time changed.
+# We don't consider the file changed if only the date/time changed,
+# unless KBUILD_BUILD_TIMESTAMP was explicitly set (e.g. for
+# reproducible builds with that value referring to a commit timestamp).
 # A kernel config change will increase the generation number, thus
 # causing compile.h to be updated (including date/time) due to the
 # changed comment in the
 # first line.
 
+if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then
+   IGNORE_PATTERN="UTS_VERSION"
+else
+   IGNORE_PATTERN="NOT_A_PATTERN_TO_BE_MATCHED"
+fi
+
 if [ -r $TARGET ] && \
-      grep -v 'UTS_VERSION' $TARGET > .tmpver.1 && \
-      grep -v 'UTS_VERSION' .tmpcompile > .tmpver.2 && \
+      grep -v $IGNORE_PATTERN $TARGET > .tmpver.1 && \
+      grep -v $IGNORE_PATTERN .tmpcompile > .tmpver.2 && \
       cmp -s .tmpver.1 .tmpver.2; then
    rm -f .tmpcompile
 else
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 089/156] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (87 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 088/156] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 090/156] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Greg Kroah-Hartman
                   ` (70 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Konstantin Porotchkin,
	Gregory CLEMENT, Sasha Levin

From: Konstantin Porotchkin <kostap@marvell.com>

[ Upstream commit e3850467bf8c82de4a052619136839fe8054b774 ]

Eliminate 1MB gap between Linux and filesystem partitions.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/cn9130-db.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
index 2c2af001619b..9758609541c7 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -260,7 +260,7 @@
 			};
 			partition@200000 {
 				label = "Linux";
-				reg = <0x200000 0xd00000>;
+				reg = <0x200000 0xe00000>;
 			};
 			partition@1000000 {
 				label = "Filesystem";
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 090/156] rtc: max77686: Do not enforce (incorrect) interrupt trigger type
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (88 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 089/156] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 091/156] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
                   ` (69 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski,
	Alexandre Belloni, Sasha Levin

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 742b0d7e15c333303daad4856de0764f4bc83601 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-max77686.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d51cc12114cb..eae7cb9faf1e 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -717,8 +717,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
 
 add_rtc_irq:
 	ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, info->drv_data->rtc_irq_chip,
 				  &info->rtc_irq_data);
 	if (ret < 0) {
 		dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 091/156] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (89 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 090/156] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 092/156] scsi: libsas: Add LUN number check in .slave_alloc callback Greg Kroah-Hartman
                   ` (68 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Martin K. Petersen,
	Sasha Levin

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 4b04ab8908f8..a396f048a031 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -493,7 +493,7 @@ ahc_inq(struct ahc_softc *ahc, u_int port)
 	return ((ahc_inb(ahc, port))
 	      | (ahc_inb(ahc, port+1) << 8)
 	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24)
+	      | (((uint64_t)ahc_inb(ahc, port+3)) << 24)
 	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 092/156] scsi: libsas: Add LUN number check in .slave_alloc callback
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (90 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 091/156] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 093/156] scsi: libfc: Fix array index out of bound exception Greg Kroah-Hartman
                   ` (67 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Wu Bo, John Garry, Jason Yan,
	Yufen Yu, Martin K. Petersen, Sasha Levin

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic94xx/aic94xx_init.c    | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 drivers/scsi/isci/init.c               | 1 +
 drivers/scsi/libsas/sas_scsi_host.c    | 9 +++++++++
 drivers/scsi/mvsas/mv_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_init.c      | 1 +
 8 files changed, 16 insertions(+)

diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a195bfe9eccc..7a78606598c4 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -53,6 +53,7 @@ static struct scsi_host_template aic94xx_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler	= sas_eh_device_reset_handler,
 	.eh_target_reset_handler	= sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3cba7bfba296..30199663c7d8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1771,6 +1771,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 46f60fc2a069..9df1639ffa65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3584,6 +3584,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e95408314078..36ec3901cfd4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3155,6 +3155,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index c452849e7bb4..ffd33e5decae 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
 	.eh_abort_handler		= sas_eh_abort_handler,
 	.eh_device_reset_handler        = sas_eh_device_reset_handler,
 	.eh_target_reset_handler        = sas_eh_target_reset_handler,
+	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..ee44a0d7730b 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
 		blk_abort_request(sc->request);
 }
 
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+	if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+		return -ENXIO;
+
+	return 0;
+}
+
 void sas_target_destroy(struct scsi_target *starget)
 {
 	struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
 EXPORT_SYMBOL_GPL(sas_phy_reset);
 EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
 EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
 EXPORT_SYMBOL_GPL(sas_target_destroy);
 EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 6aa2697c4a15..b03c0f35d7b0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -46,6 +46,7 @@ static struct scsi_host_template mvs_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index af09bd282cb9..313248c7bab9 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -101,6 +101,7 @@ static struct scsi_host_template pm8001_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 093/156] scsi: libfc: Fix array index out of bound exception
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (91 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 092/156] scsi: libsas: Add LUN number check in .slave_alloc callback Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 094/156] scsi: qedf: Add check to synchronize abort and flush Greg Kroah-Hartman
                   ` (66 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Javed Hasan, Martin K. Petersen, Sasha Levin

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]

Fix array index out of bound exception in fc_rport_prli_resp().

Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index cd0fb8ca2425..33da3c1085f0 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -1162,6 +1162,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x spp_type 0x%x\n",
 			     pp->spp.spp_flags, pp->spp.spp_type);
+
 		rdata->spp_type = pp->spp.spp_type;
 		if (resp_code != FC_SPP_RESP_ACK) {
 			if (resp_code == FC_SPP_RESP_CONF)
@@ -1184,11 +1185,13 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		/*
 		 * Call prli provider if we should act as a target
 		 */
-		prov = fc_passive_prov[rdata->spp_type];
-		if (prov) {
-			memset(&temp_spp, 0, sizeof(temp_spp));
-			prov->prli(rdata, pp->prli.prli_spp_len,
-				   &pp->spp, &temp_spp);
+		if (rdata->spp_type < FC_FC4_PROV_SIZE) {
+			prov = fc_passive_prov[rdata->spp_type];
+			if (prov) {
+				memset(&temp_spp, 0, sizeof(temp_spp));
+				prov->prli(rdata, pp->prli.prli_spp_len,
+					   &pp->spp, &temp_spp);
+			}
 		}
 		/*
 		 * Check if the image pair could be established
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 094/156] scsi: qedf: Add check to synchronize abort and flush
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (92 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 093/156] scsi: libfc: Fix array index out of bound exception Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 095/156] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
                   ` (65 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Javed Hasan, Martin K. Petersen, Sasha Levin

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ]

A race condition was observed between qedf_cleanup_fcport() and
qedf_process_error_detect()->qedf_initiate_abts():

 [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0
 [2069091.233420] Oops: 0000 [#1] SMP
 [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P           OE  ------------   3.10.0-1160.25.1.el7.x86_64 #1
 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
 [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000
 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>]  [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.443666] RSP: 0018:ffff9bacaef9fdb8  EFLAGS: 00010246
 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310
 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8
 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000
 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18
 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040
 [2069091.529472] FS:  0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000
 [2069091.543926] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0
 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [2069091.602007] PKRU: 00000000
 [2069091.616010] Call Trace:
 [2069091.629902]  [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf]
 [2069091.643941]  [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf]
 [2069091.657948]  [<ffffffff85ebddcf>] process_one_work+0x17f/0x440
 [2069091.672111]  [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0
 [2069091.686057]  [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0
 [2069091.700033]  [<ffffffff85ec5da1>] kthread+0xd1/0xe0
 [2069091.713891]  [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40

Add check in qedf_process_error_detect(). When flush is active, let the
cmds be completed from the cleanup contex.

Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_io.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 4869ef813dc4..63f99f4eeed9 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1520,9 +1520,19 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 {
 	int rval;
 
+	if (io_req == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
+		return;
+	}
+
+	if (io_req->fcport == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "fcport is NULL.\n");
+		return;
+	}
+
 	if (!cqe) {
 		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
-			  "cqe is NULL for io_req %p\n", io_req);
+			"cqe is NULL for io_req %p\n", io_req);
 		return;
 	}
 
@@ -1538,6 +1548,16 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_buf_off),
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_id));
 
+	/* When flush is active, let the cmds be flushed out from the cleanup context */
+	if (test_bit(QEDF_RPORT_IN_TARGET_RESET, &io_req->fcport->flags) ||
+		(test_bit(QEDF_RPORT_IN_LUN_RESET, &io_req->fcport->flags) &&
+		 io_req->sc_cmd->device->lun == (u64)io_req->fcport->lun_reset_lun)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			"Dropping EQE for xid=0x%x as fcport is flushing",
+			io_req->xid);
+		return;
+	}
+
 	if (qedf->stop_io_on_error) {
 		qedf_stop_all_io(qedf);
 		return;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 095/156] sched/fair: Fix CFS bandwidth hrtimer expiry type
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (93 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 094/156] scsi: qedf: Add check to synchronize abort and flush Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 096/156] perf/x86/intel/uncore: Clean up error handling path of iio mapping Greg Kroah-Hartman
                   ` (64 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Odin Ugedal, Peter Zijlstra (Intel),
	Ben Segall, Sasha Levin

From: Odin Ugedal <odin@uged.al>

[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]

The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.

This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.

Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 7dd0d859d95b..f60ef0b4ec33 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5108,7 +5108,7 @@ static const u64 cfs_bandwidth_slack_period = 5 * NSEC_PER_MSEC;
 static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 {
 	struct hrtimer *refresh_timer = &cfs_b->period_timer;
-	u64 remaining;
+	s64 remaining;
 
 	/* if the call-back is running a quota refresh is already occurring */
 	if (hrtimer_callback_running(refresh_timer))
@@ -5116,7 +5116,7 @@ static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 
 	/* is a quota refresh about to occur? */
 	remaining = ktime_to_ns(hrtimer_expires_remaining(refresh_timer));
-	if (remaining < min_expire)
+	if (remaining < (s64)min_expire)
 		return 1;
 
 	return 0;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 096/156] perf/x86/intel/uncore: Clean up error handling path of iio mapping
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (94 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 095/156] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 097/156] thermal/core/thermal_of: Stop zone device before unregistering it Greg Kroah-Hartman
                   ` (63 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, gushengxian, Kan Liang,
	Peter Zijlstra (Intel),
	Sasha Levin

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit d4ba0b06306a70c99a43f9d452886a86e2d3bd26 ]

The error handling path of iio mapping looks fragile. We already fixed
one issue caused by it, commit f797f05d917f ("perf/x86/intel/uncore:
Fix for iio mapping on Skylake Server"). Clean up the error handling
path and make the code robust.

Reported-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/40e66cf9-398b-20d7-ce4d-433be6e08921@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore_snbep.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 3a75a2c601c2..1f7bb4898a9d 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3789,11 +3789,11 @@ static int skx_iio_set_mapping(struct intel_uncore_type *type)
 	/* One more for NULL. */
 	attrs = kcalloc((uncore_max_dies() + 1), sizeof(*attrs), GFP_KERNEL);
 	if (!attrs)
-		goto err;
+		goto clear_topology;
 
 	eas = kcalloc(uncore_max_dies(), sizeof(*eas), GFP_KERNEL);
 	if (!eas)
-		goto err;
+		goto clear_attrs;
 
 	for (die = 0; die < uncore_max_dies(); die++) {
 		sprintf(buf, "die%ld", die);
@@ -3814,7 +3814,9 @@ err:
 	for (; die >= 0; die--)
 		kfree(eas[die].attr.attr.name);
 	kfree(eas);
+clear_attrs:
 	kfree(attrs);
+clear_topology:
 	kfree(type->topology);
 clear_attr_update:
 	type->attr_update = NULL;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 097/156] thermal/core/thermal_of: Stop zone device before unregistering it
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (95 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 096/156] perf/x86/intel/uncore: Clean up error handling path of iio mapping Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 098/156] s390/traps: do not test MONITOR CALL without CONFIG_BUG Greg Kroah-Hartman
                   ` (62 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Daniel Lezcano, Sasha Levin

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 5e5c9f9a75fc4532980c2e699caf8a36070a3a2e ]

Zone device is enabled after thermal_zone_of_sensor_register() completion,
but it's not disabled before senor is unregistered, leaving temperature
polling active. This results in accessing a disabled zone device and
produces a warning about this problem. Stop zone device before
unregistering it in order to fix this "use-after-free" problem.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210616190417.32214-3-digetx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_of.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 5b76f9a1280d..6379f26a335f 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -559,6 +559,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 	if (!tz)
 		return;
 
+	/* stop temperature polling */
+	thermal_zone_device_disable(tzd);
+
 	mutex_lock(&tzd->lock);
 	tzd->ops->get_temp = NULL;
 	tzd->ops->get_trend = NULL;
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 098/156] s390/traps: do not test MONITOR CALL without CONFIG_BUG
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (96 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 097/156] thermal/core/thermal_of: Stop zone device before unregistering it Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 099/156] s390: introduce proper type handling call_on_stack() macro Greg Kroah-Hartman
                   ` (61 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ilya Leoshkevich, Heiko Carstens,
	Vasily Gorbik, Sasha Levin

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit b8e9cc20b808e26329090c19ff80b7f5098e98ff ]

tinyconfig fails to boot, because without CONFIG_BUG report_bug()
always returns BUG_TRAP_TYPE_BUG, which causes mc 0,0 in
test_monitor_call() to panic. Fix by skipping the test without
CONFIG_BUG.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/traps.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 8dd23c703718..662f52eb7639 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -277,6 +277,8 @@ static void __init test_monitor_call(void)
 {
 	int val = 1;
 
+	if (!IS_ENABLED(CONFIG_BUG))
+		return;
 	asm volatile(
 		"	mc	0,0\n"
 		"0:	xgr	%0,%0\n"
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 099/156] s390: introduce proper type handling call_on_stack() macro
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (97 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 098/156] s390/traps: do not test MONITOR CALL without CONFIG_BUG Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 100/156] cifs: prevent NULL deref in cifs_compose_mount_options() Greg Kroah-Hartman
                   ` (60 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sven Schnelle, Heiko Carstens,
	Vasily Gorbik, Sasha Levin

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 41d71fe59cce41237f24f3b7bdc1b414069a34ed ]

The existing CALL_ON_STACK() macro allows for subtle bugs:

- There is no type checking of the function that is being called. That
  is: missing or too many arguments do not cause any compile error or
  warning. The same is true if the return type of the called function
  changes. This can lead to quite random bugs.

- Sign and zero extension of arguments is missing. Given that the s390
  C ABI requires that the caller of a function performs proper sign
  and zero extension this can also lead to subtle bugs.

- If arguments to the CALL_ON_STACK() macros contain functions calls
  register corruption can happen due to register asm constructs being
  used.

Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/stacktrace.h | 97 ++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h
index 76c6034428be..b4d936580fbf 100644
--- a/arch/s390/include/asm/stacktrace.h
+++ b/arch/s390/include/asm/stacktrace.h
@@ -129,6 +129,103 @@ struct stack_frame {
 	r2;								\
 })
 
+#define CALL_LARGS_0(...)						\
+	long dummy = 0
+#define CALL_LARGS_1(t1, a1)						\
+	long arg1  = (long)(t1)(a1)
+#define CALL_LARGS_2(t1, a1, t2, a2)					\
+	CALL_LARGS_1(t1, a1);						\
+	long arg2 = (long)(t2)(a2)
+#define CALL_LARGS_3(t1, a1, t2, a2, t3, a3)				\
+	CALL_LARGS_2(t1, a1, t2, a2);					\
+	long arg3 = (long)(t3)(a3)
+#define CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4)			\
+	CALL_LARGS_3(t1, a1, t2, a2, t3, a3);				\
+	long arg4  = (long)(t4)(a4)
+#define CALL_LARGS_5(t1, a1, t2, a2, t3, a3, t4, a4, t5, a5)		\
+	CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4);			\
+	long arg5 = (long)(t5)(a5)
+
+#define CALL_REGS_0							\
+	register long r2 asm("2") = dummy
+#define CALL_REGS_1							\
+	register long r2 asm("2") = arg1
+#define CALL_REGS_2							\
+	CALL_REGS_1;							\
+	register long r3 asm("3") = arg2
+#define CALL_REGS_3							\
+	CALL_REGS_2;							\
+	register long r4 asm("4") = arg3
+#define CALL_REGS_4							\
+	CALL_REGS_3;							\
+	register long r5 asm("5") = arg4
+#define CALL_REGS_5							\
+	CALL_REGS_4;							\
+	register long r6 asm("6") = arg5
+
+#define CALL_TYPECHECK_0(...)
+#define CALL_TYPECHECK_1(t, a, ...)					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_2(t, a, ...)					\
+	CALL_TYPECHECK_1(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_3(t, a, ...)					\
+	CALL_TYPECHECK_2(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_4(t, a, ...)					\
+	CALL_TYPECHECK_3(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_5(t, a, ...)					\
+	CALL_TYPECHECK_4(__VA_ARGS__);					\
+	typecheck(t, a)
+
+#define CALL_PARM_0(...) void
+#define CALL_PARM_1(t, a, ...) t
+#define CALL_PARM_2(t, a, ...) t, CALL_PARM_1(__VA_ARGS__)
+#define CALL_PARM_3(t, a, ...) t, CALL_PARM_2(__VA_ARGS__)
+#define CALL_PARM_4(t, a, ...) t, CALL_PARM_3(__VA_ARGS__)
+#define CALL_PARM_5(t, a, ...) t, CALL_PARM_4(__VA_ARGS__)
+#define CALL_PARM_6(t, a, ...) t, CALL_PARM_5(__VA_ARGS__)
+
+/*
+ * Use call_on_stack() to call a function switching to a specified
+ * stack. Proper sign and zero extension of function arguments is
+ * done. Usage:
+ *
+ * rc = call_on_stack(nr, stack, rettype, fn, t1, a1, t2, a2, ...)
+ *
+ * - nr specifies the number of function arguments of fn.
+ * - stack specifies the stack to be used.
+ * - fn is the function to be called.
+ * - rettype is the return type of fn.
+ * - t1, a1, ... are pairs, where t1 must match the type of the first
+ *   argument of fn, t2 the second, etc. a1 is the corresponding
+ *   first function argument (not name), etc.
+ */
+#define call_on_stack(nr, stack, rettype, fn, ...)			\
+({									\
+	rettype (*__fn)(CALL_PARM_##nr(__VA_ARGS__)) = fn;		\
+	unsigned long frame = current_frame_address();			\
+	unsigned long __stack = stack;					\
+	unsigned long prev;						\
+	CALL_LARGS_##nr(__VA_ARGS__);					\
+	CALL_REGS_##nr;							\
+									\
+	CALL_TYPECHECK_##nr(__VA_ARGS__);				\
+	asm volatile(							\
+		"	lgr	%[_prev],15\n"				\
+		"	lg	15,%[_stack]\n"				\
+		"	stg	%[_frame],%[_bc](15)\n"			\
+		"	brasl	14,%[_fn]\n"				\
+		"	lgr	15,%[_prev]\n"				\
+		: [_prev] "=&d" (prev), CALL_FMT_##nr			\
+		: [_stack] "R" (__stack),				\
+		  [_bc] "i" (offsetof(struct stack_frame, back_chain)),	\
+		  [_frame] "d" (frame),					\
+		  [_fn] "X" (__fn) : CALL_CLOBBER_##nr);		\
+	(rettype)r2;							\
+})
+
 #define CALL_ON_STACK_NORETURN(fn, stack)				\
 ({									\
 	asm volatile(							\
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 100/156] cifs: prevent NULL deref in cifs_compose_mount_options()
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (98 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 099/156] s390: introduce proper type handling call_on_stack() macro Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 101/156] firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string Greg Kroah-Hartman
                   ` (59 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Paulo Alcantara (SUSE),
	Steve French, Sasha Levin

From: Paulo Alcantara <pc@cjr.nz>

[ Upstream commit 03313d1c3a2f086bb60920607ab79ac8f8578306 ]

The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().

Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifs_dfs_ref.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 8dec4edc8a9f..35a6007d88a9 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -151,6 +151,9 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 		return ERR_PTR(-EINVAL);
 
 	if (ref) {
+		if (WARN_ON_ONCE(!ref->node_name || ref->path_consumed < 0))
+			return ERR_PTR(-EINVAL);
+
 		if (strlen(fullpath) - ref->path_consumed) {
 			prepath = fullpath + ref->path_consumed;
 			/* skip initial delimiter */
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 101/156] firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (99 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 100/156] cifs: prevent NULL deref in cifs_compose_mount_options() Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 102/156] arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file Greg Kroah-Hartman
                   ` (58 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Pali Rohár, Andrew Lunn,
	Gregory CLEMENT, Sasha Levin

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 90ae47215de3fec862aeb1a0f0e28bb505ab1351 ]

Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for
this driver, since it can also be used on other Armada 3720 devices.

Current compatible string 'cznic,turris-mox-rwtm' is kept for backward
compatibility.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/turris-mox-rwtm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
index 1cf4f1087492..c2d34dc8ba46 100644
--- a/drivers/firmware/turris-mox-rwtm.c
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -569,6 +569,7 @@ static int turris_mox_rwtm_remove(struct platform_device *pdev)
 
 static const struct of_device_id turris_mox_rwtm_match[] = {
 	{ .compatible = "cznic,turris-mox-rwtm", },
+	{ .compatible = "marvell,armada-3700-rwtm-firmware", },
 	{ },
 };
 
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 102/156] arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (100 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 101/156] firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 103/156] Revert "swap: fix do_swap_page() race with swapoff" Greg Kroah-Hartman
                   ` (57 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marek Behún,
	Andrew Lunn, Gregory CLEMENT, Sasha Levin

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 3a52a48973b355b3aac5add92ef50650ae37c2bd ]

Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.

Turris MOX DTS file contains also old compatible string for backward
compatibility.

The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.

This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.

Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 6 ++----
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi           | 8 ++++++++
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 53e817c5f6f3..ce2bcddf396f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -109,10 +109,8 @@
 	};
 
 	firmware {
-		turris-mox-rwtm {
-			compatible = "cznic,turris-mox-rwtm";
-			mboxes = <&rwtm 0>;
-			status = "okay";
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 6ffbb099fcac..5db81a416cd6 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -504,4 +504,12 @@
 			};
 		};
 	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
 };
-- 
2.30.2




^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 103/156] Revert "swap: fix do_swap_page() race with swapoff"
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (101 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 102/156] arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 104/156] Revert "mm/shmem: fix shmem_swapin() " Greg Kroah-Hartman
                   ` (56 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, From: Matthew Wilcox, Miaohe Lin,
	Ying Huang, Alex Shi, David Hildenbrand, Dennis Zhou,
	Hugh Dickins, Johannes Weiner, Joonsoo Kim, Michal Hocko,
	Minchan Kim, Tim Chen, Wei Yang, Yang Shi, Yu Zhao,
	Andrew Morton, Linus Torvalds, Sasha Levin

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit c3b39134bbd088b7dce5e5f342ccd6bb9142fd18 which is
commit 2799e77529c2a25492a4395db93996e3dacd762d upstream.

It should not have been added to the stable trees, sorry about that.

Link: https://lore.kernel.org/r/YPVgaY6uw59Fqg5x@casper.infradead.org
Reported-by: From: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ying Huang <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/swap.h |    9 ---------
 mm/memory.c          |   11 ++---------
 2 files changed, 2 insertions(+), 18 deletions(-)

--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -526,15 +526,6 @@ static inline struct swap_info_struct *s
 	return NULL;
 }
 
-static inline struct swap_info_struct *get_swap_device(swp_entry_t entry)
-{
-	return NULL;
-}
-
-static inline void put_swap_device(struct swap_info_struct *si)
-{
-}
-
 #define swap_address_space(entry)		(NULL)
 #define get_nr_swap_pages()			0L
 #define total_swap_pages			0L
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3353,7 +3353,6 @@ vm_fault_t do_swap_page(struct vm_fault
 {
 	struct vm_area_struct *vma = vmf->vma;
 	struct page *page = NULL, *swapcache;
-	struct swap_info_struct *si = NULL;
 	swp_entry_t entry;
 	pte_t pte;
 	int locked;
@@ -3381,16 +3380,14 @@ vm_fault_t do_swap_page(struct vm_fault
 		goto out;
 	}
 
-	/* Prevent swapoff from happening to us. */
-	si = get_swap_device(entry);
-	if (unlikely(!si))
-		goto out;
 
 	delayacct_set_flag(current, DELAYACCT_PF_SWAPIN);
 	page = lookup_swap_cache(entry, vma, vmf->address);
 	swapcache = page;
 
 	if (!page) {
+		struct swap_info_struct *si = swp_swap_info(entry);
+
 		if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
 		    __swap_count(entry) == 1) {
 			/* skip swapcache */
@@ -3559,8 +3556,6 @@ vm_fault_t do_swap_page(struct vm_fault
 unlock:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
 out:
-	if (si)
-		put_swap_device(si);
 	return ret;
 out_nomap:
 	pte_unmap_unlock(vmf->pte, vmf->ptl);
@@ -3572,8 +3567,6 @@ out_release:
 		unlock_page(swapcache);
 		put_page(swapcache);
 	}
-	if (si)
-		put_swap_device(si);
 	return ret;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 104/156] Revert "mm/shmem: fix shmem_swapin() race with swapoff"
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (102 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 103/156] Revert "swap: fix do_swap_page() race with swapoff" Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 105/156] mm/thp: simplify copying of huge zero page pmd when fork Greg Kroah-Hartman
                   ` (55 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, From: Matthew Wilcox, Miaohe Lin,
	Ying Huang, Alex Shi, David Hildenbrand, Dennis Zhou,
	Hugh Dickins, Johannes Weiner, Joonsoo Kim, Michal Hocko,
	Minchan Kim, Tim Chen, Wei Yang, Yang Shi, Yu Zhao,
	Andrew Morton, Linus Torvalds, Sasha Levin

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit a533a21b692fc15a6aadfa827b29c7d9989109ca which is
commit 2efa33fc7f6ec94a3a538c1a264273c889be2b36 upstream.

It should not have been added to the stable trees, sorry about that.

Link: https://lore.kernel.org/r/YPVgaY6uw59Fqg5x@casper.infradead.org
Reported-by: From: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ying Huang <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/shmem.c |   14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1696,8 +1696,7 @@ static int shmem_swapin_page(struct inod
 	struct address_space *mapping = inode->i_mapping;
 	struct shmem_inode_info *info = SHMEM_I(inode);
 	struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
-	struct swap_info_struct *si;
-	struct page *page = NULL;
+	struct page *page;
 	swp_entry_t swap;
 	int error;
 
@@ -1705,12 +1704,6 @@ static int shmem_swapin_page(struct inod
 	swap = radix_to_swp_entry(*pagep);
 	*pagep = NULL;
 
-	/* Prevent swapoff from happening to us. */
-	si = get_swap_device(swap);
-	if (!si) {
-		error = EINVAL;
-		goto failed;
-	}
 	/* Look it up and read it in.. */
 	page = lookup_swap_cache(swap, NULL, 0);
 	if (!page) {
@@ -1772,8 +1765,6 @@ static int shmem_swapin_page(struct inod
 	swap_free(swap);
 
 	*pagep = page;
-	if (si)
-		put_swap_device(si);
 	return 0;
 failed:
 	if (!shmem_confirm_swap(mapping, index, swap))
@@ -1784,9 +1775,6 @@ unlock:
 		put_page(page);
 	}
 
-	if (si)
-		put_swap_device(si);
-
 	return error;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 105/156] mm/thp: simplify copying of huge zero page pmd when fork
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (103 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 104/156] Revert "mm/shmem: fix shmem_swapin() " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 106/156] mm/userfaultfd: fix uffd-wp special cases for fork() Greg Kroah-Hartman
                   ` (54 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Peter Xu, Kirill A. Shutemov,
	Mike Rapoport, Axel Rasmussen, Andrea Arcangeli, Hugh Dickins,
	Jerome Glisse, Alexander Viro, Brian Geffon,
	Dr . David Alan Gilbert, Joe Perches, Lokesh Gidra, Mina Almasry,
	Oliver Upton, Shaohua Li, Shuah Khan, Stephen Rothwell,
	Wang Qing, Andrew Morton, Linus Torvalds, Mike Kravetz

From: Peter Xu <peterx@redhat.com>

commit 5fc7a5f6fd04bc18f309d9f979b32ef7d1d0a997 upstream.

Patch series "mm/uffd: Misc fix for uffd-wp and one more test".

This series tries to fix some corner case bugs for uffd-wp on either thp
or fork().  Then it introduced a new test with pagemap/pageout.

Patch layout:

Patch 1:    cleanup for THP, it'll slightly simplify the follow up patches
Patch 2-4:  misc fixes for uffd-wp here and there; please refer to each patch
Patch 5:    add pagemap support for uffd-wp
Patch 6:    add pagemap/pageout test for uffd-wp

The last test introduced can also verify some of the fixes in previous
patches, as the test will fail without the fixes.  However it's not easy
to verify all the changes in patch 2-4, but hopefully they can still be
properly reviewed.

Note that if considering the ongoing uffd-wp shmem & hugetlbfs work, patch
5 will be incomplete as it's missing e.g.  hugetlbfs part or the special
swap pte detection.  However that's not needed in this series, and since
that series is still during review, this series does not depend on that
one (the last test only runs with anonymous memory, not file-backed).  So
this series can be merged even before that series.

This patch (of 6):

Huge zero page is handled in a special path in copy_huge_pmd(), however it
should share most codes with a normal thp page.  Trying to share more code
with it by removing the special path.  The only leftover so far is the
huge zero page refcounting (mm_get_huge_zero_page()), because that's
separately done with a global counter.

This prepares for a future patch to modify the huge pmd to be installed,
so that we don't need to duplicate it explicitly into huge zero page case
too.

Link: https://lkml.kernel.org/r/20210428225030.9708-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210428225030.9708-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mike Kravetz <mike.kravetz@oracle.com>, peterx@redhat.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/huge_memory.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1088,17 +1088,13 @@ int copy_huge_pmd(struct mm_struct *dst_
 	 * a page table.
 	 */
 	if (is_huge_zero_pmd(pmd)) {
-		struct page *zero_page;
 		/*
 		 * get_huge_zero_page() will never allocate a new page here,
 		 * since we already have a zero page to copy. It just takes a
 		 * reference.
 		 */
-		zero_page = mm_get_huge_zero_page(dst_mm);
-		set_huge_zero_page(pgtable, dst_mm, vma, addr, dst_pmd,
-				zero_page);
-		ret = 0;
-		goto out_unlock;
+		mm_get_huge_zero_page(dst_mm);
+		goto out_zero_page;
 	}
 
 	src_page = pmd_page(pmd);
@@ -1122,6 +1118,7 @@ int copy_huge_pmd(struct mm_struct *dst_
 	get_page(src_page);
 	page_dup_rmap(src_page, true);
 	add_mm_counter(dst_mm, MM_ANONPAGES, HPAGE_PMD_NR);
+out_zero_page:
 	mm_inc_nr_ptes(dst_mm);
 	pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 106/156] mm/userfaultfd: fix uffd-wp special cases for fork()
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (104 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 105/156] mm/thp: simplify copying of huge zero page pmd when fork Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 107/156] f2fs: Show casefolding support only when supported Greg Kroah-Hartman
                   ` (53 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Peter Xu, Jerome Glisse,
	Mike Rapoport, Alexander Viro, Andrea Arcangeli, Axel Rasmussen,
	Brian Geffon, Dr . David Alan Gilbert, Hugh Dickins, Joe Perches,
	Kirill A. Shutemov, Lokesh Gidra, Mike Kravetz, Mina Almasry,
	Oliver Upton, Shaohua Li, Shuah Khan, Stephen Rothwell,
	Wang Qing, Andrew Morton, Linus Torvalds

From: Peter Xu <peterx@redhat.com>

commit 8f34f1eac3820fc2722e5159acceb22545b30b0d upstream.

We tried to do something similar in b569a1760782 ("userfaultfd: wp: drop
_PAGE_UFFD_WP properly when fork") previously, but it's not doing it all
right..  A few fixes around the code path:

1. We were referencing VM_UFFD_WP vm_flags on the _old_ vma rather
   than the new vma.  That's overlooked in b569a1760782, so it won't work
   as expected.  Thanks to the recent rework on fork code
   (7a4830c380f3a8b3), we can easily get the new vma now, so switch the
   checks to that.

2. Dropping the uffd-wp bit in copy_huge_pmd() could be wrong if the
   huge pmd is a migration huge pmd.  When it happens, instead of using
   pmd_uffd_wp(), we should use pmd_swp_uffd_wp().  The fix is simply to
   handle them separately.

3. Forget to carry over uffd-wp bit for a write migration huge pmd
   entry.  This also happens in copy_huge_pmd(), where we converted a
   write huge migration entry into a read one.

4. In copy_nonpresent_pte(), drop uffd-wp if necessary for swap ptes.

5. In copy_present_page() when COW is enforced when fork(), we also
   need to pass over the uffd-wp bit if VM_UFFD_WP is armed on the new
   vma, and when the pte to be copied has uffd-wp bit set.

Remove the comment in copy_present_pte() about this.  It won't help a huge
lot to only comment there, but comment everywhere would be an overkill.
Let's assume the commit messages would help.

[peterx@redhat.com: fix a few thp pmd missing uffd-wp bit]
  Link: https://lkml.kernel.org/r/20210428225030.9708-4-peterx@redhat.com

Link: https://lkml.kernel.org/r/20210428225030.9708-3-peterx@redhat.com
Fixes: b569a1760782f ("userfaultfd: wp: drop _PAGE_UFFD_WP properly when fork")
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/huge_mm.h |    2 +-
 include/linux/swapops.h |    2 ++
 mm/huge_memory.c        |   27 ++++++++++++++-------------
 mm/memory.c             |   25 +++++++++++++------------
 4 files changed, 30 insertions(+), 26 deletions(-)

--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -10,7 +10,7 @@
 vm_fault_t do_huge_pmd_anonymous_page(struct vm_fault *vmf);
 int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
-		  struct vm_area_struct *vma);
+		  struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma);
 void huge_pmd_set_accessed(struct vm_fault *vmf, pmd_t orig_pmd);
 int copy_huge_pud(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pud_t *dst_pud, pud_t *src_pud, unsigned long addr,
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -265,6 +265,8 @@ static inline swp_entry_t pmd_to_swp_ent
 
 	if (pmd_swp_soft_dirty(pmd))
 		pmd = pmd_swp_clear_soft_dirty(pmd);
+	if (pmd_swp_uffd_wp(pmd))
+		pmd = pmd_swp_clear_uffd_wp(pmd);
 	arch_entry = __pmd_to_swp_entry(pmd);
 	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
 }
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1026,7 +1026,7 @@ struct page *follow_devmap_pmd(struct vm
 
 int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 		  pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
-		  struct vm_area_struct *vma)
+		  struct vm_area_struct *dst_vma, struct vm_area_struct *src_vma)
 {
 	spinlock_t *dst_ptl, *src_ptl;
 	struct page *src_page;
@@ -1035,7 +1035,7 @@ int copy_huge_pmd(struct mm_struct *dst_
 	int ret = -ENOMEM;
 
 	/* Skip if can be re-fill on fault */
-	if (!vma_is_anonymous(vma))
+	if (!vma_is_anonymous(dst_vma))
 		return 0;
 
 	pgtable = pte_alloc_one(dst_mm);
@@ -1049,14 +1049,6 @@ int copy_huge_pmd(struct mm_struct *dst_
 	ret = -EAGAIN;
 	pmd = *src_pmd;
 
-	/*
-	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
-	 * does not have the VM_UFFD_WP, which means that the uffd
-	 * fork event is not enabled.
-	 */
-	if (!(vma->vm_flags & VM_UFFD_WP))
-		pmd = pmd_clear_uffd_wp(pmd);
-
 #ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
 	if (unlikely(is_swap_pmd(pmd))) {
 		swp_entry_t entry = pmd_to_swp_entry(pmd);
@@ -1067,11 +1059,15 @@ int copy_huge_pmd(struct mm_struct *dst_
 			pmd = swp_entry_to_pmd(entry);
 			if (pmd_swp_soft_dirty(*src_pmd))
 				pmd = pmd_swp_mksoft_dirty(pmd);
+			if (pmd_swp_uffd_wp(*src_pmd))
+				pmd = pmd_swp_mkuffd_wp(pmd);
 			set_pmd_at(src_mm, addr, src_pmd, pmd);
 		}
 		add_mm_counter(dst_mm, MM_ANONPAGES, HPAGE_PMD_NR);
 		mm_inc_nr_ptes(dst_mm);
 		pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
+		if (!userfaultfd_wp(dst_vma))
+			pmd = pmd_swp_clear_uffd_wp(pmd);
 		set_pmd_at(dst_mm, addr, dst_pmd, pmd);
 		ret = 0;
 		goto out_unlock;
@@ -1107,11 +1103,11 @@ int copy_huge_pmd(struct mm_struct *dst_
 	 * best effort that the pinned pages won't be replaced by another
 	 * random page during the coming copy-on-write.
 	 */
-	if (unlikely(page_needs_cow_for_dma(vma, src_page))) {
+	if (unlikely(page_needs_cow_for_dma(src_vma, src_page))) {
 		pte_free(dst_mm, pgtable);
 		spin_unlock(src_ptl);
 		spin_unlock(dst_ptl);
-		__split_huge_pmd(vma, src_pmd, addr, false, NULL);
+		__split_huge_pmd(src_vma, src_pmd, addr, false, NULL);
 		return -EAGAIN;
 	}
 
@@ -1121,8 +1117,9 @@ int copy_huge_pmd(struct mm_struct *dst_
 out_zero_page:
 	mm_inc_nr_ptes(dst_mm);
 	pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
-
 	pmdp_set_wrprotect(src_mm, addr, src_pmd);
+	if (!userfaultfd_wp(dst_vma))
+		pmd = pmd_clear_uffd_wp(pmd);
 	pmd = pmd_mkold(pmd_wrprotect(pmd));
 	set_pmd_at(dst_mm, addr, dst_pmd, pmd);
 
@@ -1838,6 +1835,8 @@ int change_huge_pmd(struct vm_area_struc
 			newpmd = swp_entry_to_pmd(entry);
 			if (pmd_swp_soft_dirty(*pmd))
 				newpmd = pmd_swp_mksoft_dirty(newpmd);
+			if (pmd_swp_uffd_wp(*pmd))
+				newpmd = pmd_swp_mkuffd_wp(newpmd);
 			set_pmd_at(mm, addr, pmd, newpmd);
 		}
 		goto unlock;
@@ -3248,6 +3247,8 @@ void remove_migration_pmd(struct page_vm
 		pmde = pmd_mksoft_dirty(pmde);
 	if (is_write_migration_entry(entry))
 		pmde = maybe_pmd_mkwrite(pmde, vma);
+	if (pmd_swp_uffd_wp(*pvmw->pmd))
+		pmde = pmd_wrprotect(pmd_mkuffd_wp(pmde));
 
 	flush_cache_range(vma, mmun_start, mmun_start + HPAGE_PMD_SIZE);
 	if (PageAnon(new))
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -708,10 +708,10 @@ out:
 
 static unsigned long
 copy_nonpresent_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
-		pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *vma,
-		unsigned long addr, int *rss)
+		pte_t *dst_pte, pte_t *src_pte, struct vm_area_struct *dst_vma,
+		struct vm_area_struct *src_vma, unsigned long addr, int *rss)
 {
-	unsigned long vm_flags = vma->vm_flags;
+	unsigned long vm_flags = dst_vma->vm_flags;
 	pte_t pte = *src_pte;
 	struct page *page;
 	swp_entry_t entry = pte_to_swp_entry(pte);
@@ -780,6 +780,8 @@ copy_nonpresent_pte(struct mm_struct *ds
 			set_pte_at(src_mm, addr, src_pte, pte);
 		}
 	}
+	if (!userfaultfd_wp(dst_vma))
+		pte = pte_swp_clear_uffd_wp(pte);
 	set_pte_at(dst_mm, addr, dst_pte, pte);
 	return 0;
 }
@@ -845,6 +847,9 @@ copy_present_page(struct vm_area_struct
 	/* All done, just insert the new page copy in the child */
 	pte = mk_pte(new_page, dst_vma->vm_page_prot);
 	pte = maybe_mkwrite(pte_mkdirty(pte), dst_vma);
+	if (userfaultfd_pte_wp(dst_vma, *src_pte))
+		/* Uffd-wp needs to be delivered to dest pte as well */
+		pte = pte_wrprotect(pte_mkuffd_wp(pte));
 	set_pte_at(dst_vma->vm_mm, addr, dst_pte, pte);
 	return 0;
 }
@@ -894,12 +899,7 @@ copy_present_pte(struct vm_area_struct *
 		pte = pte_mkclean(pte);
 	pte = pte_mkold(pte);
 
-	/*
-	 * Make sure the _PAGE_UFFD_WP bit is cleared if the new VMA
-	 * does not have the VM_UFFD_WP, which means that the uffd
-	 * fork event is not enabled.
-	 */
-	if (!(vm_flags & VM_UFFD_WP))
+	if (!userfaultfd_wp(dst_vma))
 		pte = pte_clear_uffd_wp(pte);
 
 	set_pte_at(dst_vma->vm_mm, addr, dst_pte, pte);
@@ -974,7 +974,8 @@ again:
 		if (unlikely(!pte_present(*src_pte))) {
 			entry.val = copy_nonpresent_pte(dst_mm, src_mm,
 							dst_pte, src_pte,
-							src_vma, addr, rss);
+							dst_vma, src_vma,
+							addr, rss);
 			if (entry.val)
 				break;
 			progress += 8;
@@ -1051,8 +1052,8 @@ copy_pmd_range(struct vm_area_struct *ds
 			|| pmd_devmap(*src_pmd)) {
 			int err;
 			VM_BUG_ON_VMA(next-addr != HPAGE_PMD_SIZE, src_vma);
-			err = copy_huge_pmd(dst_mm, src_mm,
-					    dst_pmd, src_pmd, addr, src_vma);
+			err = copy_huge_pmd(dst_mm, src_mm, dst_pmd, src_pmd,
+					    addr, dst_vma, src_vma);
 			if (err == -ENOMEM)
 				return -ENOMEM;
 			if (!err)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 107/156] f2fs: Show casefolding support only when supported
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (105 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 106/156] mm/userfaultfd: fix uffd-wp special cases for fork() Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 108/156] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
                   ` (52 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Daniel Rosenberg, Eric Biggers,
	Chao Yu, Jaegeuk Kim

From: Daniel Rosenberg <drosen@google.com>

commit 39307f8ee3539478c28e71b4909b5b028cce14b1 upstream.

The casefolding feature is only supported when CONFIG_UNICODE is set.
This modifies the feature list f2fs presents under sysfs accordingly.

Fixes: 5aba54302a46 ("f2fs: include charset encoding information in the superblock")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/f2fs/sysfs.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -708,7 +708,9 @@ F2FS_FEATURE_RO_ATTR(lost_found, FEAT_LO
 F2FS_FEATURE_RO_ATTR(verity, FEAT_VERITY);
 #endif
 F2FS_FEATURE_RO_ATTR(sb_checksum, FEAT_SB_CHECKSUM);
+#ifdef CONFIG_UNICODE
 F2FS_FEATURE_RO_ATTR(casefold, FEAT_CASEFOLD);
+#endif
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 F2FS_FEATURE_RO_ATTR(compression, FEAT_COMPRESSION);
 F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, compr_written_block, compr_written_block);
@@ -810,7 +812,9 @@ static struct attribute *f2fs_feat_attrs
 	ATTR_LIST(verity),
 #endif
 	ATTR_LIST(sb_checksum),
+#ifdef CONFIG_UNICODE
 	ATTR_LIST(casefold),
+#endif
 #ifdef CONFIG_F2FS_FS_COMPRESSION
 	ATTR_LIST(compression),
 #endif



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 108/156] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (106 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 107/156] f2fs: Show casefolding support only when supported Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 109/156] net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz Greg Kroah-Hartman
                   ` (51 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Doug Berger, Florian Fainelli,
	David S. Miller

From: Doug Berger <opendmb@gmail.com>

commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream.

Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.

Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   17 ++---------------
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |    6 ------
 2 files changed, 2 insertions(+), 21 deletions(-)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1640,7 +1640,8 @@ static void bcmgenet_power_up(struct bcm
 
 	switch (mode) {
 	case GENET_POWER_PASSIVE:
-		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+		reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
+			 EXT_ENERGY_DET_MASK);
 		if (GENET_IS_V5(priv)) {
 			reg &= ~(EXT_PWR_DOWN_PHY_EN |
 				 EXT_PWR_DOWN_PHY_RD |
@@ -3292,7 +3293,6 @@ static int bcmgenet_open(struct net_devi
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	unsigned long dma_ctrl;
-	u32 reg;
 	int ret;
 
 	netif_dbg(priv, ifup, dev, "bcmgenet_open\n");
@@ -3318,12 +3318,6 @@ static int bcmgenet_open(struct net_devi
 
 	bcmgenet_set_hw_addr(priv, dev->dev_addr);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);
 
@@ -4139,7 +4133,6 @@ static int bcmgenet_resume(struct device
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct bcmgenet_rxnfc_rule *rule;
 	unsigned long dma_ctrl;
-	u32 reg;
 	int ret;
 
 	if (!netif_running(dev))
@@ -4176,12 +4169,6 @@ static int bcmgenet_resume(struct device
 		if (rule->state != BCMGENET_RXNFC_STATE_UNUSED)
 			bcmgenet_hfb_create_rxnfc_filter(priv, rule);
 
-	if (priv->internal_phy) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg |= EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);
 
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -186,12 +186,6 @@ int bcmgenet_wol_power_down_cfg(struct b
 	reg |= CMD_RX_EN;
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
 
-	if (priv->hw_params->flags & GENET_HAS_EXT) {
-		reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
-		reg &= ~EXT_ENERGY_DET_MASK;
-		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
-	}
-
 	reg = UMAC_IRQ_MPD_R;
 	if (hfb_enable)
 		reg |=  UMAC_IRQ_HFB_SM | UMAC_IRQ_HFB_MM;



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 109/156] net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (107 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 108/156] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 110/156] net: dsa: mv88e6xxx: use correct .stats_set_histogram() " Greg Kroah-Hartman
                   ` (50 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, Andrew Lunn,
	David S. Miller

From: Marek Behún <kabel@kernel.org>

commit 7da467d82d1ed4fb317aff836f99709169e73f10 upstream.

Commit f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
introduced .port_set_policy() method with implementation for several
models, but forgot to add Topaz, which can use the 6352 implementation.

Use the 6352 implementation of .port_set_policy() on Topaz.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3583,6 +3583,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_speed_duplex = mv88e6341_port_set_speed_duplex,
 	.port_max_speed_mode = mv88e6341_port_max_speed_mode,
 	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_policy = mv88e6352_port_set_policy,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_ucast_flood = mv88e6352_port_set_ucast_flood,
 	.port_set_mcast_flood = mv88e6352_port_set_mcast_flood,
@@ -4383,6 +4384,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_speed_duplex = mv88e6341_port_set_speed_duplex,
 	.port_max_speed_mode = mv88e6341_port_max_speed_mode,
 	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_policy = mv88e6352_port_set_policy,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_ucast_flood = mv88e6352_port_set_ucast_flood,
 	.port_set_mcast_flood = mv88e6352_port_set_mcast_flood,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 110/156] net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (108 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 109/156] net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 111/156] net: dsa: mv88e6xxx: enable .rmu_disable() " Greg Kroah-Hartman
                   ` (49 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, Andrew Lunn,
	David S. Miller

From: Marek Behún <kabel@kernel.org>

commit 11527f3c4725640e6c40a2b7654e303f45e82a6c upstream.

Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
introduced wrong .stats_set_histogram() method for Topaz family.

The Peridot method should be used instead.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3597,7 +3597,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,
@@ -4398,7 +4398,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_set_cmode = mv88e6341_port_set_cmode,
 	.port_setup_message_port = mv88e6xxx_setup_message_port,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,
-	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_set_histogram = mv88e6390_g1_stats_set_histogram,
 	.stats_get_sset_count = mv88e6320_stats_get_sset_count,
 	.stats_get_strings = mv88e6320_stats_get_strings,
 	.stats_get_stats = mv88e6390_stats_get_stats,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 111/156] net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (109 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 110/156] net: dsa: mv88e6xxx: use correct .stats_set_histogram() " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 112/156] net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz Greg Kroah-Hartman
                   ` (48 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, Andrew Lunn,
	David S. Miller

From: Marek Behún <kabel@kernel.org>

commit 3709488790022c85720f991bff50d48ed5a36e6a upstream.

Commit 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op")
introduced .rmu_disable() method with implementation for several models,
but forgot to add Topaz, which can use the Peridot implementation.

Use the Peridot implementation of .rmu_disable() on Topaz.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3607,6 +3607,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
+	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,
@@ -4408,6 +4409,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
+	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 112/156] net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (110 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 111/156] net: dsa: mv88e6xxx: enable .rmu_disable() " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 113/156] net: dsa: mv88e6xxx: enable SerDes RX stats " Greg Kroah-Hartman
                   ` (47 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, Andrew Lunn,
	David S. Miller

From: Marek Behún <kabel@kernel.org>

commit c07fff3492acae41cedbabea395b644dd5872b8c upstream.

Commit 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for Topaz.

Enable this feature also for Topaz.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3608,6 +3608,8 @@ static const struct mv88e6xxx_ops mv88e6
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
+	.atu_get_hash = mv88e6165_g1_atu_get_hash,
+	.atu_set_hash = mv88e6165_g1_atu_set_hash,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,
@@ -4410,6 +4412,8 @@ static const struct mv88e6xxx_ops mv88e6
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
+	.atu_get_hash = mv88e6165_g1_atu_get_hash,
+	.atu_set_hash = mv88e6165_g1_atu_set_hash,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6390_serdes_power,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 113/156] net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (111 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 112/156] net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 114/156] net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz Greg Kroah-Hartman
                   ` (46 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, David S. Miller

From: Marek Behún <kabel@kernel.org>

commit a03b98d68367b18e5db6d6850e2cc18754fba94a upstream.

Commit 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") added
support for RX statistics on SerDes ports for Peridot.

This same implementation is also valid for Topaz, but was not enabled
at the time.

We need to use the generic .serdes_get_lane() method instead of the
Peridot specific one in the stats methods so that on Topaz the proper
one is used.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0df952873636a ("mv88e6xxx: Add serdes Rx statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c   |    6 ++++++
 drivers/net/dsa/mv88e6xxx/serdes.c |    6 +++---
 2 files changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3623,6 +3623,9 @@ static const struct mv88e6xxx_ops mv88e6
 	.serdes_irq_enable = mv88e6390_serdes_irq_enable,
 	.serdes_irq_status = mv88e6390_serdes_irq_status,
 	.gpio_ops = &mv88e6352_gpio_ops,
+	.serdes_get_sset_count = mv88e6390_serdes_get_sset_count,
+	.serdes_get_strings = mv88e6390_serdes_get_strings,
+	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.phylink_validate = mv88e6341_phylink_validate,
 };
 
@@ -4429,6 +4432,9 @@ static const struct mv88e6xxx_ops mv88e6
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.avb_ops = &mv88e6390_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
+	.serdes_get_sset_count = mv88e6390_serdes_get_sset_count,
+	.serdes_get_strings = mv88e6390_serdes_get_strings,
+	.serdes_get_stats = mv88e6390_serdes_get_stats,
 	.phylink_validate = mv88e6341_phylink_validate,
 };
 
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -722,7 +722,7 @@ static struct mv88e6390_serdes_hw_stat m
 
 int mv88e6390_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port)
 {
-	if (mv88e6390_serdes_get_lane(chip, port) < 0)
+	if (mv88e6xxx_serdes_get_lane(chip, port) < 0)
 		return 0;
 
 	return ARRAY_SIZE(mv88e6390_serdes_hw_stats);
@@ -734,7 +734,7 @@ int mv88e6390_serdes_get_strings(struct
 	struct mv88e6390_serdes_hw_stat *stat;
 	int i;
 
-	if (mv88e6390_serdes_get_lane(chip, port) < 0)
+	if (mv88e6xxx_serdes_get_lane(chip, port) < 0)
 		return 0;
 
 	for (i = 0; i < ARRAY_SIZE(mv88e6390_serdes_hw_stats); i++) {
@@ -770,7 +770,7 @@ int mv88e6390_serdes_get_stats(struct mv
 	int lane;
 	int i;
 
-	lane = mv88e6390_serdes_get_lane(chip, port);
+	lane = mv88e6xxx_serdes_get_lane(chip, port);
 	if (lane < 0)
 		return 0;
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 114/156] net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (112 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 113/156] net: dsa: mv88e6xxx: enable SerDes RX stats " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 115/156] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
                   ` (45 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Behún, Andrew Lunn,
	David S. Miller

From: Marek Behún <kabel@kernel.org>

commit 953b0dcbe2e3f7bee98cc3bca2ec82c8298e9c16 upstream.

Commit bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS
registers to ethtool -d") added support for dumping SerDes PCS registers
via ethtool -d for Peridot.

The same implementation is also valid for Topaz, but was not
enabled at the time.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3626,6 +3626,8 @@ static const struct mv88e6xxx_ops mv88e6
 	.serdes_get_sset_count = mv88e6390_serdes_get_sset_count,
 	.serdes_get_strings = mv88e6390_serdes_get_strings,
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
+	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
+	.serdes_get_regs = mv88e6390_serdes_get_regs,
 	.phylink_validate = mv88e6341_phylink_validate,
 };
 
@@ -4435,6 +4437,8 @@ static const struct mv88e6xxx_ops mv88e6
 	.serdes_get_sset_count = mv88e6390_serdes_get_sset_count,
 	.serdes_get_strings = mv88e6390_serdes_get_strings,
 	.serdes_get_stats = mv88e6390_serdes_get_stats,
+	.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
+	.serdes_get_regs = mv88e6390_serdes_get_regs,
 	.phylink_validate = mv88e6341_phylink_validate,
 };
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 115/156] net: ipv6: fix return value of ip6_skb_dst_mtu
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (113 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 114/156] net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 116/156] netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo Greg Kroah-Hartman
                   ` (44 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, David Ahern, Vadim Fedorenko,
	David S. Miller

From: Vadim Fedorenko <vfedorenko@novek.ru>

commit 40fc3054b45820c28ea3c65e2c86d041dc244a8a upstream.

Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.

Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip6_route.h |    2 +-
 net/ipv6/xfrm6_output.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -263,7 +263,7 @@ static inline bool ipv6_anycast_destinat
 int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 		 int (*output)(struct net *, struct sock *, struct sk_buff *));
 
-static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+static inline unsigned int ip6_skb_dst_mtu(struct sk_buff *skb)
 {
 	int mtu;
 
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -56,7 +56,7 @@ static int __xfrm6_output(struct net *ne
 {
 	struct dst_entry *dst = skb_dst(skb);
 	struct xfrm_state *x = dst->xfrm;
-	int mtu;
+	unsigned int mtu;
 	bool toobig;
 
 #ifdef CONFIG_NETFILTER



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 116/156] netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (114 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 115/156] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 117/156] net/sched: act_ct: fix err check for nf_conntrack_confirm Greg Kroah-Hartman
                   ` (43 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Vasily Averin, Florian Westphal,
	Pablo Neira Ayuso

From: Vasily Averin <vvs@virtuozzo.com>

commit c23a9fd209bc6f8c1fa6ee303fdf037d784a1627 upstream.

Two patches listed below removed ctnetlink_dump_helpinfo call from under
rcu_read_lock. Now its rcu_dereference generates following warning:
=============================
WARNING: suspicious RCU usage
5.13.0+ #5 Not tainted
-----------------------------
net/netfilter/nf_conntrack_netlink.c:221 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
stack backtrace:
CPU: 1 PID: 2251 Comm: conntrack Not tainted 5.13.0+ #5
Call Trace:
 dump_stack+0x7f/0xa1
 ctnetlink_dump_helpinfo+0x134/0x150 [nf_conntrack_netlink]
 ctnetlink_fill_info+0x2c2/0x390 [nf_conntrack_netlink]
 ctnetlink_dump_table+0x13f/0x370 [nf_conntrack_netlink]
 netlink_dump+0x10c/0x370
 __netlink_dump_start+0x1a7/0x260
 ctnetlink_get_conntrack+0x1e5/0x250 [nf_conntrack_netlink]
 nfnetlink_rcv_msg+0x613/0x993 [nfnetlink]
 netlink_rcv_skb+0x50/0x100
 nfnetlink_rcv+0x55/0x120 [nfnetlink]
 netlink_unicast+0x181/0x260
 netlink_sendmsg+0x23f/0x460
 sock_sendmsg+0x5b/0x60
 __sys_sendto+0xf1/0x160
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x36/0x70
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 49ca022bccc5 ("netfilter: ctnetlink: don't dump ct extensions of unconfirmed conntracks")
Fixes: 0b35f6031a00 ("netfilter: Remove duplicated rcu_read_lock.")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_conntrack_netlink.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -218,6 +218,7 @@ static int ctnetlink_dump_helpinfo(struc
 	if (!help)
 		return 0;
 
+	rcu_read_lock();
 	helper = rcu_dereference(help->helper);
 	if (!helper)
 		goto out;
@@ -233,9 +234,11 @@ static int ctnetlink_dump_helpinfo(struc
 
 	nla_nest_end(skb, nest_helper);
 out:
+	rcu_read_unlock();
 	return 0;
 
 nla_put_failure:
+	rcu_read_unlock();
 	return -1;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 117/156] net/sched: act_ct: fix err check for nf_conntrack_confirm
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (115 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 116/156] netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 118/156] netfilter: nf_tables: Fix dereference of null pointer flow Greg Kroah-Hartman
                   ` (42 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, wenxu, David S. Miller

From: wenxu <wenxu@ucloud.cn>

commit 8955b90c3cdad199137809aac8ccbbb585355913 upstream.

The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_ct.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -1026,7 +1026,8 @@ do_nat:
 		/* This will take care of sending queued events
 		 * even if the connection is already confirmed.
 		 */
-		nf_conntrack_confirm(skb);
+		if (nf_conntrack_confirm(skb) != NF_ACCEPT)
+			goto drop;
 	}
 
 	if (!skip_add)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 118/156] netfilter: nf_tables: Fix dereference of null pointer flow
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (116 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 117/156] net/sched: act_ct: fix err check for nf_conntrack_confirm Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 119/156] vmxnet3: fix cksum offload issues for tunnels with non-default udp ports Greg Kroah-Hartman
                   ` (41 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Pablo Neira Ayuso

From: Colin Ian King <colin.king@canonical.com>

commit 4ca041f919f13783b0b03894783deee00dbca19a upstream.

In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then
nft_flow_rule_create is not called and flow is NULL. The subsequent
error handling execution via label err_destroy_flow_rule will lead
to a null pointer dereference on flow when calling nft_flow_rule_destroy.
Since the error path to err_destroy_flow_rule has to cater for null
and non-null flows, only call nft_flow_rule_destroy if flow is non-null
to fix this issue.

Addresses-Coverity: ("Explicity null dereference")
Fixes: 3c5e44622011 ("netfilter: nf_tables: memleak in hw offload abort path")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_api.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3453,7 +3453,8 @@ static int nf_tables_newrule(struct sk_b
 	return 0;
 
 err_destroy_flow_rule:
-	nft_flow_rule_destroy(flow);
+	if (flow)
+		nft_flow_rule_destroy(flow);
 err_release_rule:
 	nf_tables_rule_release(&ctx, rule);
 err_release_expr:



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 119/156] vmxnet3: fix cksum offload issues for tunnels with non-default udp ports
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (117 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 118/156] netfilter: nf_tables: Fix dereference of null pointer flow Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 120/156] net/sched: act_ct: remove and free nf_table callbacks Greg Kroah-Hartman
                   ` (40 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ronak Doshi, Guolin Yang, David S. Miller

From: Ronak Doshi <doshir@vmware.com>

commit b22580233d473dbf7bbfa4f6549c09e2c80e9e64 upstream.

Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restricted to UDP tunnels with default
Vxlan and Geneve ports.

This patch fixes the issue for tunnels with non-default ports using
features check capability and filtering appropriate features for such
tunnels.

Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vmxnet3/vmxnet3_ethtool.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -1,7 +1,7 @@
 /*
  * Linux driver for VMware's vmxnet3 ethernet NIC.
  *
- * Copyright (C) 2008-2020, VMware, Inc. All Rights Reserved.
+ * Copyright (C) 2008-2021, VMware, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -26,6 +26,10 @@
 
 
 #include "vmxnet3_int.h"
+#include <net/vxlan.h>
+#include <net/geneve.h>
+
+#define VXLAN_UDP_PORT 8472
 
 struct vmxnet3_stat_desc {
 	char desc[ETH_GSTRING_LEN];
@@ -262,6 +266,8 @@ netdev_features_t vmxnet3_features_check
 	if (VMXNET3_VERSION_GE_4(adapter) &&
 	    skb->encapsulation && skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4_proto = 0;
+		u16 port;
+		struct udphdr *udph;
 
 		switch (vlan_get_protocol(skb)) {
 		case htons(ETH_P_IP):
@@ -274,8 +280,20 @@ netdev_features_t vmxnet3_features_check
 			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 		}
 
-		if (l4_proto != IPPROTO_UDP)
+		switch (l4_proto) {
+		case IPPROTO_UDP:
+			udph = udp_hdr(skb);
+			port = be16_to_cpu(udph->dest);
+			/* Check if offloaded port is supported */
+			if (port != GENEVE_UDP_PORT &&
+			    port != IANA_VXLAN_UDP_PORT &&
+			    port != VXLAN_UDP_PORT) {
+				return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+			}
+			break;
+		default:
 			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+		}
 	}
 	return features;
 }



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 120/156] net/sched: act_ct: remove and free nf_table callbacks
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (118 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 119/156] vmxnet3: fix cksum offload issues for tunnels with non-default udp ports Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 121/156] net: bridge: sync fdb to new unicast-filtering ports Greg Kroah-Hartman
                   ` (39 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Louis Peens, Yinjun Zhang,
	Simon Horman, David S. Miller

From: Louis Peens <louis.peens@corigine.com>

commit 77ac5e40c44eb78333fbc38482d61fc2af7dda0a upstream.

When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work
there is no guarantee that the callback list, added to by
nf_flow_table_offload_add_cb, is empty. This means that it is
possible that the flow_block_cb memory allocated will be lost.

Fix this by iterating the list and freeing the flow_block_cb entries
before freeing the nf_table entry (via freeing ct_ft).

Fixes: 978703f42549 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_ct.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -322,11 +322,22 @@ err_alloc:
 
 static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
 {
+	struct flow_block_cb *block_cb, *tmp_cb;
 	struct tcf_ct_flow_table *ct_ft;
+	struct flow_block *block;
 
 	ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
 			     rwork);
 	nf_flow_table_free(&ct_ft->nf_ft);
+
+	/* Remove any remaining callbacks before cleanup */
+	block = &ct_ft->nf_ft.flow_block;
+	down_write(&ct_ft->nf_ft.flow_block_lock);
+	list_for_each_entry_safe(block_cb, tmp_cb, &block->cb_list, list) {
+		list_del(&block_cb->list);
+		flow_block_cb_free(block_cb);
+	}
+	up_write(&ct_ft->nf_ft.flow_block_lock);
 	kfree(ct_ft);
 
 	module_put(THIS_MODULE);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 121/156] net: bridge: sync fdb to new unicast-filtering ports
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (119 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 120/156] net/sched: act_ct: remove and free nf_table callbacks Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 122/156] net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment Greg Kroah-Hartman
                   ` (38 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Wolfgang Bumiller,
	Nikolay Aleksandrov, David S. Miller

From: Wolfgang Bumiller <w.bumiller@proxmox.com>

commit a019abd8022061b917da767cd1a66ed823724eab upstream.

Since commit 2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.

Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.

Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.

Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_if.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -562,7 +562,7 @@ int br_add_if(struct net_bridge *br, str
 	struct net_bridge_port *p;
 	int err = 0;
 	unsigned br_hr, dev_hr;
-	bool changed_addr;
+	bool changed_addr, fdb_synced = false;
 
 	/* Don't allow bridging non-ethernet like devices. */
 	if ((dev->flags & IFF_LOOPBACK) ||
@@ -652,6 +652,19 @@ int br_add_if(struct net_bridge *br, str
 	list_add_rcu(&p->list, &br->port_list);
 
 	nbp_update_port_count(br);
+	if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) {
+		/* When updating the port count we also update all ports'
+		 * promiscuous mode.
+		 * A port leaving promiscuous mode normally gets the bridge's
+		 * fdb synced to the unicast filter (if supported), however,
+		 * `br_port_clear_promisc` does not distinguish between
+		 * non-promiscuous ports and *new* ports, so we need to
+		 * sync explicitly here.
+		 */
+		fdb_synced = br_fdb_sync_static(br, p) == 0;
+		if (!fdb_synced)
+			netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n");
+	}
 
 	netdev_update_features(br->dev);
 
@@ -701,6 +714,8 @@ int br_add_if(struct net_bridge *br, str
 	return 0;
 
 err7:
+	if (fdb_synced)
+		br_fdb_unsync_static(br, p);
 	list_del_rcu(&p->list);
 	br_fdb_delete_by_port(br, p, 0, 1);
 	nbp_update_port_count(br);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 122/156] net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (120 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 121/156] net: bridge: sync fdb to new unicast-filtering ports Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 123/156] net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops Greg Kroah-Hartman
                   ` (37 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, David S. Miller

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit 6ff63a150b5556012589ae59efac1b5eeb7d32c3 upstream.

Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment
routine even if the fragment contains only the ethernet FCS.

Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2303,19 +2303,19 @@ mvneta_swbm_add_rx_fragment(struct mvnet
 		skb_frag_off_set(frag, pp->rx_offset_correction);
 		skb_frag_size_set(frag, data_len);
 		__skb_frag_set_page(frag, page);
-
-		/* last fragment */
-		if (len == *size) {
-			struct skb_shared_info *sinfo;
-
-			sinfo = xdp_get_shared_info_from_buff(xdp);
-			sinfo->nr_frags = xdp_sinfo->nr_frags;
-			memcpy(sinfo->frags, xdp_sinfo->frags,
-			       sinfo->nr_frags * sizeof(skb_frag_t));
-		}
 	} else {
 		page_pool_put_full_page(rxq->page_pool, page, true);
 	}
+
+	/* last fragment */
+	if (len == *size) {
+		struct skb_shared_info *sinfo;
+
+		sinfo = xdp_get_shared_info_from_buff(xdp);
+		sinfo->nr_frags = xdp_sinfo->nr_frags;
+		memcpy(sinfo->frags, xdp_sinfo->frags,
+		       sinfo->nr_frags * sizeof(skb_frag_t));
+	}
 	*size -= len;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 123/156] net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (121 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 122/156] net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 124/156] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
                   ` (36 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller

From: Taehee Yoo <ap420073@gmail.com>

commit 09adf7566d436322ced595b166dea48b06852efe upstream.

There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, netdevsim should always use real_dev instead of dev.
Of course, real_dev always not be null.

Test commands:
    ip netns add A
    ip netns exec A bash
    modprobe netdevsim
    echo "1 1" > /sys/bus/netdevsim/new_device
    ip link add bond0 type bond mode active-backup
    ip link set eth0 master bond0
    ip link set eth0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
BUG: spinlock bad magic on CPU#5, kworker/5:1/53
 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1,
.owner_cpu: -235736076
CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168
Workqueue: events linkwatch_event
Call Trace:
 dump_stack+0xa4/0xe5
 do_raw_spin_lock+0x20b/0x270
 ? rwlock_bug.part.1+0x90/0x90
 _raw_spin_lock_nested+0x5f/0x70
 bond_get_stats+0xe4/0x4c0 [bonding]
 ? rcu_read_lock_sched_held+0xc0/0xc0
 ? bond_neigh_init+0x2c0/0x2c0 [bonding]
 ? dev_get_alias+0xe2/0x190
 ? dev_get_port_parent_id+0x14a/0x360
 ? rtnl_unregister+0x190/0x190
 ? dev_get_phys_port_name+0xa0/0xa0
 ? memset+0x1f/0x40
 ? memcpy+0x38/0x60
 ? rtnl_phys_switch_id_fill+0x91/0x100
 dev_get_stats+0x8c/0x270
 rtnl_fill_stats+0x44/0xbe0
 ? nla_put+0xbe/0x140
 rtnl_fill_ifinfo+0x1054/0x3ad0
[ ... ]

Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/netdevsim/ipsec.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/netdevsim/ipsec.c
+++ b/drivers/net/netdevsim/ipsec.c
@@ -85,7 +85,7 @@ static int nsim_ipsec_parse_proto_keys(s
 				       u32 *mykey, u32 *mysalt)
 {
 	const char aes_gcm_name[] = "rfc4106(gcm(aes))";
-	struct net_device *dev = xs->xso.dev;
+	struct net_device *dev = xs->xso.real_dev;
 	unsigned char *key_data;
 	char *alg_name = NULL;
 	int key_len;
@@ -134,7 +134,7 @@ static int nsim_ipsec_add_sa(struct xfrm
 	u16 sa_idx;
 	int ret;
 
-	dev = xs->xso.dev;
+	dev = xs->xso.real_dev;
 	ns = netdev_priv(dev);
 	ipsec = &ns->ipsec;
 
@@ -194,7 +194,7 @@ static int nsim_ipsec_add_sa(struct xfrm
 
 static void nsim_ipsec_del_sa(struct xfrm_state *xs)
 {
-	struct netdevsim *ns = netdev_priv(xs->xso.dev);
+	struct netdevsim *ns = netdev_priv(xs->xso.real_dev);
 	struct nsim_ipsec *ipsec = &ns->ipsec;
 	u16 sa_idx;
 
@@ -211,7 +211,7 @@ static void nsim_ipsec_del_sa(struct xfr
 
 static bool nsim_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
 {
-	struct netdevsim *ns = netdev_priv(xs->xso.dev);
+	struct netdevsim *ns = netdev_priv(xs->xso.real_dev);
 	struct nsim_ipsec *ipsec = &ns->ipsec;
 
 	ipsec->ok++;



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 124/156] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (122 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 123/156] net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 125/156] net: ip_tunnel: fix mtu calculation for ETHER tunnel devices Greg Kroah-Hartman
                   ` (35 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maxime Ripard, Florian Fainelli,
	David S. Miller

From: Florian Fainelli <f.fainelli@gmail.com>

commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream.

Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.

Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3238,15 +3238,21 @@ static void bcmgenet_get_hw_addr(struct
 /* Returns a reusable dma control register value */
 static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 {
+	unsigned int i;
 	u32 reg;
 	u32 dma_ctrl;
 
 	/* disable DMA */
 	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->tx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
 
+	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->rx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 125/156] net: ip_tunnel: fix mtu calculation for ETHER tunnel devices
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (123 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 124/156] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 126/156] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
                   ` (34 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jianlin Shi, Hangbin Liu, David S. Miller

From: Hangbin Liu <liuhangbin@gmail.com>

commit 9992a078b1771da354ac1f9737e1e639b687caa2 upstream.

Commit 28e104d00281 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.

But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.

Fixes: 28e104d00281 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_tunnel.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -317,7 +317,7 @@ static int ip_tunnel_bind_dev(struct net
 	}
 
 	dev->needed_headroom = t_hlen + hlen;
-	mtu -= t_hlen;
+	mtu -= t_hlen + (dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0);
 
 	if (mtu < IPV4_MIN_MTU)
 		mtu = IPV4_MIN_MTU;
@@ -348,6 +348,9 @@ static struct ip_tunnel *ip_tunnel_creat
 	t_hlen = nt->hlen + sizeof(struct iphdr);
 	dev->min_mtu = ETH_MIN_MTU;
 	dev->max_mtu = IP_MAX_MTU - t_hlen;
+	if (dev->type == ARPHRD_ETHER)
+		dev->max_mtu -= dev->hard_header_len;
+
 	ip_tunnel_add(itn, nt);
 	return nt;
 
@@ -489,11 +492,14 @@ static int tnl_update_pmtu(struct net_de
 
 	tunnel_hlen = md ? tunnel_hlen : tunnel->hlen;
 	pkt_size = skb->len - tunnel_hlen;
+	pkt_size -= dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0;
 
-	if (df)
+	if (df) {
 		mtu = dst_mtu(&rt->dst) - (sizeof(struct iphdr) + tunnel_hlen);
-	else
+		mtu -= dev->type == ARPHRD_ETHER ? dev->hard_header_len : 0;
+	} else {
 		mtu = skb_valid_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
+	}
 
 	if (skb_valid_dst(skb))
 		skb_dst_update_pmtu_no_confirm(skb, mtu);
@@ -972,6 +978,9 @@ int __ip_tunnel_change_mtu(struct net_de
 	int t_hlen = tunnel->hlen + sizeof(struct iphdr);
 	int max_mtu = IP_MAX_MTU - t_hlen;
 
+	if (dev->type == ARPHRD_ETHER)
+		max_mtu -= dev->hard_header_len;
+
 	if (new_mtu < ETH_MIN_MTU)
 		return -EINVAL;
 
@@ -1149,6 +1158,9 @@ int ip_tunnel_newlink(struct net_device
 	if (tb[IFLA_MTU]) {
 		unsigned int max = IP_MAX_MTU - (nt->hlen + sizeof(struct iphdr));
 
+		if (dev->type == ARPHRD_ETHER)
+			max -= dev->hard_header_len;
+
 		mtu = clamp(dev->mtu, (unsigned int)ETH_MIN_MTU, max);
 	}
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 126/156] net: moxa: fix UAF in moxart_mac_probe
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (124 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 125/156] net: ip_tunnel: fix mtu calculation for ETHER tunnel devices Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 127/156] net: qcom/emac: fix UAF in emac_remove Greg Kroah-Hartman
                   ` (33 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, David S. Miller

From: Pavel Skripkin <paskripkin@gmail.com>

commit c78eaeebe855fd93f2e77142ffd0404a54070d84 upstream.

In case of netdev registration failure the code path will
jump to init_fail label:

init_fail:
	netdev_err(ndev, "init failed\n");
	moxart_mac_free_memory(ndev);
irq_map_fail:
	free_netdev(ndev);
	return ret;

So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/moxa/moxart_ether.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -540,10 +540,8 @@ static int moxart_mac_probe(struct platf
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
 	ret = register_netdev(ndev);
-	if (ret) {
-		free_netdev(ndev);
+	if (ret)
 		goto init_fail;
-	}
 
 	netdev_dbg(ndev, "%s: IRQ=%d address=%pM\n",
 		   __func__, ndev->irq, ndev->dev_addr);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 127/156] net: qcom/emac: fix UAF in emac_remove
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (125 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 126/156] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 128/156] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
                   ` (32 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, David S. Miller

From: Pavel Skripkin <paskripkin@gmail.com>

commit ad297cd2db8953e2202970e9504cab247b6c7cb4 upstream.

adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qualcomm/emac/emac.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -735,12 +735,13 @@ static int emac_remove(struct platform_d
 
 	put_device(&adpt->phydev->mdio.dev);
 	mdiobus_unregister(adpt->mii_bus);
-	free_netdev(netdev);
 
 	if (adpt->phy.digital)
 		iounmap(adpt->phy.digital);
 	iounmap(adpt->phy.base);
 
+	free_netdev(netdev);
+
 	return 0;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 128/156] net: ti: fix UAF in tlan_remove_one
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (126 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 127/156] net: qcom/emac: fix UAF in emac_remove Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 129/156] net: send SYNACK packet with accepted fwmark Greg Kroah-Hartman
                   ` (31 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, David S. Miller

From: Pavel Skripkin <paskripkin@gmail.com>

commit 0336f8ffece62f882ab3012820965a786a983f70 upstream.

priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ti/tlan.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/ti/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -313,9 +313,8 @@ static void tlan_remove_one(struct pci_d
 	pci_release_regions(pdev);
 #endif
 
-	free_netdev(dev);
-
 	cancel_work_sync(&priv->tlan_tqueue);
+	free_netdev(dev);
 }
 
 static void tlan_start(struct net_device *dev)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 129/156] net: send SYNACK packet with accepted fwmark
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (127 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 128/156] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 130/156] net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache Greg Kroah-Hartman
                   ` (30 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexander Ovechkin, Dmitry Yakunin,
	Eric Dumazet, David S. Miller

From: Alexander Ovechkin <ovov@yandex-team.ru>

commit 43b90bfad34bcb81b8a5bc7dc650800f4be1787e upstream.

commit e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
fixed IPv4 only.

This part is for the IPv6 side.

Fixes: e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/tcp_ipv6.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -540,7 +540,7 @@ static int tcp_v6_send_synack(const stru
 		opt = ireq->ipv6_opt;
 		if (!opt)
 			opt = rcu_dereference(np->opt);
-		err = ip6_xmit(sk, skb, fl6, sk->sk_mark, opt,
+		err = ip6_xmit(sk, skb, fl6, skb->mark ? : sk->sk_mark, opt,
 			       tclass, sk->sk_priority);
 		rcu_read_unlock();
 		err = net_xmit_eval(err);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 130/156] net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (128 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 129/156] net: send SYNACK packet with accepted fwmark Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 131/156] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
                   ` (29 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexander Lobakin, Antoine Tenart,
	David S. Miller

From: Antoine Tenart <atenart@kernel.org>

commit 28b34f01a73435a754956ebae826e728c03ffa38 upstream.

Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:

napi_skb_finish
  __kfree_skb_defer
    napi_skb_cache_put

The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:

[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0

Leading sometimes to other memory related issues.

Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.

[1] At least in setups using veth pairs and tunnels. Building a kernel
    with KASAN we can for example see packets allocated in
    sk_stream_alloc_skb hit the above path and later the issue arises
    when the skbuff is reused.

Fixes: 9243adfc311a ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6194,6 +6194,8 @@ static gro_result_t napi_skb_finish(stru
 	case GRO_MERGED_FREE:
 		if (NAPI_GRO_CB(skb)->free == NAPI_GRO_FREE_STOLEN_HEAD)
 			napi_skb_free_stolen_head(skb);
+		else if (skb->fclone != SKB_FCLONE_UNAVAILABLE)
+			__kfree_skb(skb);
 		else
 			__kfree_skb_defer(skb);
 		break;



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 131/156] net: validate lwtstate->data before returning from skb_tunnel_info()
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (129 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 130/156] net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 132/156] net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() Greg Kroah-Hartman
                   ` (28 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller

From: Taehee Yoo <ap420073@gmail.com>

commit 67a9c94317402b826fc3db32afc8f39336803d97 upstream.

skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info
type without validation. lwtstate->data can have various types such as
mpls_iptunnel_encap, etc and these are not compatible.
So skb_tunnel_info() should validate before returning that pointer.

Splat looks like:
BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan]
Read of size 2 at addr ffff888106ec2698 by task ping/811

CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195
Call Trace:
 dump_stack_lvl+0x56/0x7b
 print_address_description.constprop.8.cold.13+0x13/0x2ee
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 kasan_report.cold.14+0x83/0xdf
 ? vxlan_get_route+0x418/0x4b0 [vxlan]
 vxlan_get_route+0x418/0x4b0 [vxlan]
 [ ... ]
 vxlan_xmit_one+0x148b/0x32b0 [vxlan]
 [ ... ]
 vxlan_xmit+0x25c5/0x4780 [vxlan]
 [ ... ]
 dev_hard_start_xmit+0x1ae/0x6e0
 __dev_queue_xmit+0x1f39/0x31a0
 [ ... ]
 neigh_xmit+0x2f9/0x940
 mpls_xmit+0x911/0x1600 [mpls_iptunnel]
 lwtunnel_xmit+0x18f/0x450
 ip_finish_output2+0x867/0x2040
 [ ... ]

Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/dst_metadata.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/include/net/dst_metadata.h
+++ b/include/net/dst_metadata.h
@@ -45,7 +45,9 @@ skb_tunnel_info(const struct sk_buff *sk
 		return &md_dst->u.tun_info;
 
 	dst = skb_dst(skb);
-	if (dst && dst->lwtstate)
+	if (dst && dst->lwtstate &&
+	    (dst->lwtstate->type == LWTUNNEL_ENCAP_IP ||
+	     dst->lwtstate->type == LWTUNNEL_ENCAP_IP6))
 		return lwt_tun_info(dst->lwtstate);
 
 	return NULL;



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 132/156] net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (130 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 131/156] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 133/156] net: fddi: fix UAF in fza_probe Greg Kroah-Hartman
                   ` (27 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Vladimir Oltean, David S. Miller

From: Vladimir Oltean <vladimir.oltean@nxp.com>

commit bcb9928a155444dbd212473e60241ca0a7f641e1 upstream.

This was not caught because there is no switch driver which implements
the .port_bridge_join but not .port_bridge_leave method, but it should
nonetheless be fixed, as in certain conditions (driver development) it
might lead to NULL pointer dereference.

Fixes: f66a6a69f97a ("net: dsa: permit cross-chip bridging between all trees in the system")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dsa/switch.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -110,11 +110,11 @@ static int dsa_switch_bridge_leave(struc
 	int err, port;
 
 	if (dst->index == info->tree_index && ds->index == info->sw_index &&
-	    ds->ops->port_bridge_join)
+	    ds->ops->port_bridge_leave)
 		ds->ops->port_bridge_leave(ds, info->port, info->br);
 
 	if ((dst->index != info->tree_index || ds->index != info->sw_index) &&
-	    ds->ops->crosschip_bridge_join)
+	    ds->ops->crosschip_bridge_leave)
 		ds->ops->crosschip_bridge_leave(ds, info->tree_index,
 						info->sw_index, info->port,
 						info->br);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 133/156] net: fddi: fix UAF in fza_probe
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (131 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 132/156] net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 134/156] dma-buf/sync_file: Dont leak fences on merge failure Greg Kroah-Hartman
                   ` (26 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, David S. Miller

From: Pavel Skripkin <paskripkin@gmail.com>

commit deb7178eb940e2c5caca1b1db084a69b2e59b4c9 upstream.

fp is netdev private data and it cannot be
used after free_netdev() call. Using fp after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() after error message.

Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700
TURBOchannel adapter")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/fddi/defza.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/fddi/defza.c
+++ b/drivers/net/fddi/defza.c
@@ -1504,9 +1504,8 @@ err_out_resource:
 	release_mem_region(start, len);
 
 err_out_kfree:
-	free_netdev(dev);
-
 	pr_err("%s: initialization failure, aborting!\n", fp->name);
+	free_netdev(dev);
 	return ret;
 }
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 134/156] dma-buf/sync_file: Dont leak fences on merge failure
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (132 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 133/156] net: fddi: fix UAF in fza_probe Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 135/156] kbuild: do not suppress Kconfig prompts for silent build Greg Kroah-Hartman
                   ` (25 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jason Ekstrand, Christian König,
	Gustavo Padovan

From: Jason Ekstrand <jason@jlekstrand.net>

commit ffe000217c5068c5da07ccb1c0f8cce7ad767435 upstream.

Each add_fence() call does a dma_fence_get() on the relevant fence.  In
the error path, we weren't calling dma_fence_put() so all those fences
got leaked.  Also, in the krealloc_array failure case, we weren't
freeing the fences array.  Instead, ensure that i and fences are always
zero-initialized and dma_fence_put() all the fences and kfree(fences) on
every error path.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a02b9dc90d84 ("dma-buf/sync_file: refactor fence storage in struct sync_file")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624174732.1754546-1-jason@jlekstrand.net
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/sync_file.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/dma-buf/sync_file.c
+++ b/drivers/dma-buf/sync_file.c
@@ -211,8 +211,8 @@ static struct sync_file *sync_file_merge
 					 struct sync_file *b)
 {
 	struct sync_file *sync_file;
-	struct dma_fence **fences, **nfences, **a_fences, **b_fences;
-	int i, i_a, i_b, num_fences, a_num_fences, b_num_fences;
+	struct dma_fence **fences = NULL, **nfences, **a_fences, **b_fences;
+	int i = 0, i_a, i_b, num_fences, a_num_fences, b_num_fences;
 
 	sync_file = sync_file_alloc();
 	if (!sync_file)
@@ -236,7 +236,7 @@ static struct sync_file *sync_file_merge
 	 * If a sync_file can only be created with sync_file_merge
 	 * and sync_file_create, this is a reasonable assumption.
 	 */
-	for (i = i_a = i_b = 0; i_a < a_num_fences && i_b < b_num_fences; ) {
+	for (i_a = i_b = 0; i_a < a_num_fences && i_b < b_num_fences; ) {
 		struct dma_fence *pt_a = a_fences[i_a];
 		struct dma_fence *pt_b = b_fences[i_b];
 
@@ -277,15 +277,16 @@ static struct sync_file *sync_file_merge
 		fences = nfences;
 	}
 
-	if (sync_file_set_fence(sync_file, fences, i) < 0) {
-		kfree(fences);
+	if (sync_file_set_fence(sync_file, fences, i) < 0)
 		goto err;
-	}
 
 	strlcpy(sync_file->user_name, name, sizeof(sync_file->user_name));
 	return sync_file;
 
 err:
+	while (i)
+		dma_fence_put(fences[--i]);
+	kfree(fences);
 	fput(sync_file->file);
 	return NULL;
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 135/156] kbuild: do not suppress Kconfig prompts for silent build
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (133 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 134/156] dma-buf/sync_file: Dont leak fences on merge failure Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 136/156] vboxsf: Honor excl flag to the dir-inode create op Greg Kroah-Hartman
                   ` (24 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tetsuo Handa, Masahiro Yamada

From: Masahiro Yamada <masahiroy@kernel.org>

commit d952cfaf0cffdbbb0433c67206b645131f17ca5f upstream.

When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.

  $ make
  [ snip ]
  Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)

This is the only interactive place in the build process.

Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.

Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.

Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -721,11 +721,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
-
+#
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 136/156] vboxsf: Honor excl flag to the dir-inode create op
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (134 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 135/156] kbuild: do not suppress Kconfig prompts for silent build Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 137/156] vboxsf: Make vboxsf_dir_create() return the handle for the created file Greg Kroah-Hartman
                   ` (23 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede

From: Hans de Goede <hdegoede@redhat.com>

commit cc3ddee97cff034cea4d095de4a484c92a219bf5 upstream.

Honor the excl flag to the dir-inode create op, instead of behaving
as if it is always set.

Note the old behavior still worked most of the time since a non-exclusive
open only calls the create op, if there is a race and the file is created
between the dentry lookup and the calling of the create call.

While at it change the type of the is_dir parameter to the
vboxsf_dir_create() helper from an int to a bool, to be consistent with
the use of bool for the excl parameter.

Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/vboxsf/dir.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/fs/vboxsf/dir.c
+++ b/fs/vboxsf/dir.c
@@ -253,7 +253,7 @@ static int vboxsf_dir_instantiate(struct
 }
 
 static int vboxsf_dir_create(struct inode *parent, struct dentry *dentry,
-			     umode_t mode, int is_dir)
+			     umode_t mode, bool is_dir, bool excl)
 {
 	struct vboxsf_inode *sf_parent_i = VBOXSF_I(parent);
 	struct vboxsf_sbi *sbi = VBOXSF_SBI(parent->i_sb);
@@ -261,10 +261,12 @@ static int vboxsf_dir_create(struct inod
 	int err;
 
 	params.handle = SHFL_HANDLE_NIL;
-	params.create_flags = SHFL_CF_ACT_CREATE_IF_NEW |
-			      SHFL_CF_ACT_FAIL_IF_EXISTS |
-			      SHFL_CF_ACCESS_READWRITE |
-			      (is_dir ? SHFL_CF_DIRECTORY : 0);
+	params.create_flags = SHFL_CF_ACT_CREATE_IF_NEW | SHFL_CF_ACCESS_READWRITE;
+	if (is_dir)
+		params.create_flags |= SHFL_CF_DIRECTORY;
+	if (excl)
+		params.create_flags |= SHFL_CF_ACT_FAIL_IF_EXISTS;
+
 	params.info.attr.mode = (mode & 0777) |
 				(is_dir ? SHFL_TYPE_DIRECTORY : SHFL_TYPE_FILE);
 	params.info.attr.additional = SHFLFSOBJATTRADD_NOTHING;
@@ -292,14 +294,14 @@ static int vboxsf_dir_mkfile(struct user
 			     struct inode *parent, struct dentry *dentry,
 			     umode_t mode, bool excl)
 {
-	return vboxsf_dir_create(parent, dentry, mode, 0);
+	return vboxsf_dir_create(parent, dentry, mode, false, excl);
 }
 
 static int vboxsf_dir_mkdir(struct user_namespace *mnt_userns,
 			    struct inode *parent, struct dentry *dentry,
 			    umode_t mode)
 {
-	return vboxsf_dir_create(parent, dentry, mode, 1);
+	return vboxsf_dir_create(parent, dentry, mode, true, true);
 }
 
 static int vboxsf_dir_unlink(struct inode *parent, struct dentry *dentry)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 137/156] vboxsf: Make vboxsf_dir_create() return the handle for the created file
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (135 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 136/156] vboxsf: Honor excl flag to the dir-inode create op Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 138/156] vboxsf: Add vboxsf_[create|release]_sf_handle() helpers Greg Kroah-Hartman
                   ` (22 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede

From: Hans de Goede <hdegoede@redhat.com>

commit ab0c29687bc7a890d1a86ac376b0b0fd78b2d9b6 upstream.

Make vboxsf_dir_create() optionally return the vboxsf-handle for
the created file. This is a preparation patch for adding atomic_open
support.

Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/vboxsf/dir.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

--- a/fs/vboxsf/dir.c
+++ b/fs/vboxsf/dir.c
@@ -253,7 +253,7 @@ static int vboxsf_dir_instantiate(struct
 }
 
 static int vboxsf_dir_create(struct inode *parent, struct dentry *dentry,
-			     umode_t mode, bool is_dir, bool excl)
+			     umode_t mode, bool is_dir, bool excl, u64 *handle_ret)
 {
 	struct vboxsf_inode *sf_parent_i = VBOXSF_I(parent);
 	struct vboxsf_sbi *sbi = VBOXSF_SBI(parent->i_sb);
@@ -278,30 +278,34 @@ static int vboxsf_dir_create(struct inod
 	if (params.result != SHFL_FILE_CREATED)
 		return -EPERM;
 
-	vboxsf_close(sbi->root, params.handle);
-
 	err = vboxsf_dir_instantiate(parent, dentry, &params.info);
 	if (err)
-		return err;
+		goto out;
 
 	/* parent directory access/change time changed */
 	sf_parent_i->force_restat = 1;
 
-	return 0;
+out:
+	if (err == 0 && handle_ret)
+		*handle_ret = params.handle;
+	else
+		vboxsf_close(sbi->root, params.handle);
+
+	return err;
 }
 
 static int vboxsf_dir_mkfile(struct user_namespace *mnt_userns,
 			     struct inode *parent, struct dentry *dentry,
 			     umode_t mode, bool excl)
 {
-	return vboxsf_dir_create(parent, dentry, mode, false, excl);
+	return vboxsf_dir_create(parent, dentry, mode, false, excl, NULL);
 }
 
 static int vboxsf_dir_mkdir(struct user_namespace *mnt_userns,
 			    struct inode *parent, struct dentry *dentry,
 			    umode_t mode)
 {
-	return vboxsf_dir_create(parent, dentry, mode, true, true);
+	return vboxsf_dir_create(parent, dentry, mode, true, true, NULL);
 }
 
 static int vboxsf_dir_unlink(struct inode *parent, struct dentry *dentry)



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 138/156] vboxsf: Add vboxsf_[create|release]_sf_handle() helpers
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (136 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 137/156] vboxsf: Make vboxsf_dir_create() return the handle for the created file Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 139/156] vboxsf: Add support for the atomic_open directory-inode op Greg Kroah-Hartman
                   ` (21 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede

From: Hans de Goede <hdegoede@redhat.com>

commit 02f840f90764f22f5c898901849bdbf0cee752ba upstream.

Factor out the code to create / release a struct vboxsf_handle into
2 new helper functions.

This is a preparation patch for adding atomic_open support.

Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/vboxsf/file.c   |   71 ++++++++++++++++++++++++++++++++---------------------
 fs/vboxsf/vfsmod.h |    7 +++++
 2 files changed, 51 insertions(+), 27 deletions(-)

--- a/fs/vboxsf/file.c
+++ b/fs/vboxsf/file.c
@@ -20,17 +20,39 @@ struct vboxsf_handle {
 	struct list_head head;
 };
 
-static int vboxsf_file_open(struct inode *inode, struct file *file)
+struct vboxsf_handle *vboxsf_create_sf_handle(struct inode *inode,
+					      u64 handle, u32 access_flags)
 {
 	struct vboxsf_inode *sf_i = VBOXSF_I(inode);
-	struct shfl_createparms params = {};
 	struct vboxsf_handle *sf_handle;
-	u32 access_flags = 0;
-	int err;
 
 	sf_handle = kmalloc(sizeof(*sf_handle), GFP_KERNEL);
 	if (!sf_handle)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
+
+	/* the host may have given us different attr then requested */
+	sf_i->force_restat = 1;
+
+	/* init our handle struct and add it to the inode's handles list */
+	sf_handle->handle = handle;
+	sf_handle->root = VBOXSF_SBI(inode->i_sb)->root;
+	sf_handle->access_flags = access_flags;
+	kref_init(&sf_handle->refcount);
+
+	mutex_lock(&sf_i->handle_list_mutex);
+	list_add(&sf_handle->head, &sf_i->handle_list);
+	mutex_unlock(&sf_i->handle_list_mutex);
+
+	return sf_handle;
+}
+
+static int vboxsf_file_open(struct inode *inode, struct file *file)
+{
+	struct vboxsf_sbi *sbi = VBOXSF_SBI(inode->i_sb);
+	struct shfl_createparms params = {};
+	struct vboxsf_handle *sf_handle;
+	u32 access_flags = 0;
+	int err;
 
 	/*
 	 * We check the value of params.handle afterwards to find out if
@@ -83,23 +105,14 @@ static int vboxsf_file_open(struct inode
 	err = vboxsf_create_at_dentry(file_dentry(file), &params);
 	if (err == 0 && params.handle == SHFL_HANDLE_NIL)
 		err = (params.result == SHFL_FILE_EXISTS) ? -EEXIST : -ENOENT;
-	if (err) {
-		kfree(sf_handle);
+	if (err)
 		return err;
-	}
 
-	/* the host may have given us different attr then requested */
-	sf_i->force_restat = 1;
-
-	/* init our handle struct and add it to the inode's handles list */
-	sf_handle->handle = params.handle;
-	sf_handle->root = VBOXSF_SBI(inode->i_sb)->root;
-	sf_handle->access_flags = access_flags;
-	kref_init(&sf_handle->refcount);
-
-	mutex_lock(&sf_i->handle_list_mutex);
-	list_add(&sf_handle->head, &sf_i->handle_list);
-	mutex_unlock(&sf_i->handle_list_mutex);
+	sf_handle = vboxsf_create_sf_handle(inode, params.handle, access_flags);
+	if (IS_ERR(sf_handle)) {
+		vboxsf_close(sbi->root, params.handle);
+		return PTR_ERR(sf_handle);
+	}
 
 	file->private_data = sf_handle;
 	return 0;
@@ -114,22 +127,26 @@ static void vboxsf_handle_release(struct
 	kfree(sf_handle);
 }
 
-static int vboxsf_file_release(struct inode *inode, struct file *file)
+void vboxsf_release_sf_handle(struct inode *inode, struct vboxsf_handle *sf_handle)
 {
 	struct vboxsf_inode *sf_i = VBOXSF_I(inode);
-	struct vboxsf_handle *sf_handle = file->private_data;
 
+	mutex_lock(&sf_i->handle_list_mutex);
+	list_del(&sf_handle->head);
+	mutex_unlock(&sf_i->handle_list_mutex);
+
+	kref_put(&sf_handle->refcount, vboxsf_handle_release);
+}
+
+static int vboxsf_file_release(struct inode *inode, struct file *file)
+{
 	/*
 	 * When a file is closed on our (the guest) side, we want any subsequent
 	 * accesses done on the host side to see all changes done from our side.
 	 */
 	filemap_write_and_wait(inode->i_mapping);
 
-	mutex_lock(&sf_i->handle_list_mutex);
-	list_del(&sf_handle->head);
-	mutex_unlock(&sf_i->handle_list_mutex);
-
-	kref_put(&sf_handle->refcount, vboxsf_handle_release);
+	vboxsf_release_sf_handle(inode, file->private_data);
 	return 0;
 }
 
--- a/fs/vboxsf/vfsmod.h
+++ b/fs/vboxsf/vfsmod.h
@@ -18,6 +18,8 @@
 #define VBOXSF_SBI(sb)	((struct vboxsf_sbi *)(sb)->s_fs_info)
 #define VBOXSF_I(i)	container_of(i, struct vboxsf_inode, vfs_inode)
 
+struct vboxsf_handle;
+
 struct vboxsf_options {
 	unsigned long ttl;
 	kuid_t uid;
@@ -80,6 +82,11 @@ extern const struct file_operations vbox
 extern const struct address_space_operations vboxsf_reg_aops;
 extern const struct dentry_operations vboxsf_dentry_ops;
 
+/* from file.c */
+struct vboxsf_handle *vboxsf_create_sf_handle(struct inode *inode,
+					      u64 handle, u32 access_flags);
+void vboxsf_release_sf_handle(struct inode *inode, struct vboxsf_handle *sf_handle);
+
 /* from utils.c */
 struct inode *vboxsf_new_inode(struct super_block *sb);
 int vboxsf_init_inode(struct vboxsf_sbi *sbi, struct inode *inode,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 139/156] vboxsf: Add support for the atomic_open directory-inode op
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (137 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 138/156] vboxsf: Add vboxsf_[create|release]_sf_handle() helpers Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 140/156] ARM: dts: aspeed: Fix AST2600 machines line names Greg Kroah-Hartman
                   ` (20 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ludovic Pouzenc, Hans de Goede

From: Hans de Goede <hdegoede@redhat.com>

commit 52dfd86aa568e433b24357bb5fc725560f1e22d8 upstream.

Opening a new file is done in 2 steps on regular filesystems:

1. Call the create inode-op on the parent-dir to create an inode
to hold the meta-data related to the file.
2. Call the open file-op to get a handle for the file.

vboxsf however does not really use disk-backed inodes because it
is based on passing through file-related system-calls through to
the hypervisor. So both steps translate to an open(2) call being
passed through to the hypervisor. With the handle returned by
the first call immediately being closed again.

Making 2 open calls for a single open(..., O_CREATE, ...) calls
has 2 problems:

a) It is not really efficient.
b) It actually breaks some apps.

An example of b) is doing a git clone inside a vboxsf mount.
When git clone tries to create a tempfile to store the pak
files which is downloading the following happens:

1. vboxsf_dir_mkfile() gets called with a mode of 0444 and succeeds.
2. vboxsf_file_open() gets called with file->f_flags containing
O_RDWR. When the host is a Linux machine this fails because doing
a open(..., O_RDWR) on a file which exists and has mode 0444 results
in an -EPERM error.

Other network-filesystems and fuse avoid the problem of needing to
pass 2 open() calls to the other side by using the atomic_open
directory-inode op.

This commit fixes git clone not working inside a vboxsf mount,
by adding support for the atomic_open directory-inode op.
As an added bonus this should also make opening new files faster.

The atomic_open implementation is modelled after the atomic_open
implementations from the 9p and fuse code.

Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/vboxsf/dir.c |   48 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

--- a/fs/vboxsf/dir.c
+++ b/fs/vboxsf/dir.c
@@ -308,6 +308,53 @@ static int vboxsf_dir_mkdir(struct user_
 	return vboxsf_dir_create(parent, dentry, mode, true, true, NULL);
 }
 
+static int vboxsf_dir_atomic_open(struct inode *parent, struct dentry *dentry,
+				  struct file *file, unsigned int flags, umode_t mode)
+{
+	struct vboxsf_sbi *sbi = VBOXSF_SBI(parent->i_sb);
+	struct vboxsf_handle *sf_handle;
+	struct dentry *res = NULL;
+	u64 handle;
+	int err;
+
+	if (d_in_lookup(dentry)) {
+		res = vboxsf_dir_lookup(parent, dentry, 0);
+		if (IS_ERR(res))
+			return PTR_ERR(res);
+
+		if (res)
+			dentry = res;
+	}
+
+	/* Only creates */
+	if (!(flags & O_CREAT) || d_really_is_positive(dentry))
+		return finish_no_open(file, res);
+
+	err = vboxsf_dir_create(parent, dentry, mode, false, flags & O_EXCL, &handle);
+	if (err)
+		goto out;
+
+	sf_handle = vboxsf_create_sf_handle(d_inode(dentry), handle, SHFL_CF_ACCESS_READWRITE);
+	if (IS_ERR(sf_handle)) {
+		vboxsf_close(sbi->root, handle);
+		err = PTR_ERR(sf_handle);
+		goto out;
+	}
+
+	err = finish_open(file, dentry, generic_file_open);
+	if (err) {
+		/* This also closes the handle passed to vboxsf_create_sf_handle() */
+		vboxsf_release_sf_handle(d_inode(dentry), sf_handle);
+		goto out;
+	}
+
+	file->private_data = sf_handle;
+	file->f_mode |= FMODE_CREATED;
+out:
+	dput(res);
+	return err;
+}
+
 static int vboxsf_dir_unlink(struct inode *parent, struct dentry *dentry)
 {
 	struct vboxsf_sbi *sbi = VBOXSF_SBI(parent->i_sb);
@@ -428,6 +475,7 @@ const struct inode_operations vboxsf_dir
 	.lookup  = vboxsf_dir_lookup,
 	.create  = vboxsf_dir_mkfile,
 	.mkdir   = vboxsf_dir_mkdir,
+	.atomic_open = vboxsf_dir_atomic_open,
 	.rmdir   = vboxsf_dir_unlink,
 	.unlink  = vboxsf_dir_unlink,
 	.rename  = vboxsf_dir_rename,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 140/156] ARM: dts: aspeed: Fix AST2600 machines line names
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (138 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 139/156] vboxsf: Add support for the atomic_open directory-inode op Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 141/156] ARM: dts: tacoma: Add phase corrections for eMMC Greg Kroah-Hartman
                   ` (19 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joel Stanley

From: Joel Stanley <joel@jms.id.au>

commit ca46ad2214473df1a6a9496be17156d65ba89b9f upstream.

Tacoma and Rainier both have a line-names array that is too long:

 gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208

This was probably copied from an AST2500 device tree that did have more
GPIOs on the controller.

Fixes: e9b24b55ca4f ("ARM: dts: aspeed: rainier: Add gpio line names")
Fixes: 2f68e4e7df67 ("ARM: dts: aspeed: tacoma: Add gpio line names")
Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts |    5 +----
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts  |    5 +----
 2 files changed, 2 insertions(+), 8 deletions(-)

--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -280,10 +280,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 
 	pin_mclr_vpp {
 		gpio-hog;
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -136,10 +136,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };
 
 &fmc {



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 141/156] ARM: dts: tacoma: Add phase corrections for eMMC
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (139 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 140/156] ARM: dts: aspeed: Fix AST2600 machines line names Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 142/156] ARM: dts: everest: " Greg Kroah-Hartman
                   ` (18 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrew Jeffery, Joel Stanley

From: Andrew Jeffery <andrew@aj.id.au>

commit 2d6608b57c50c54c3e46649110e8ea5a40959c30 upstream.

The degree values were reversed out from the magic tap values of 7 (in)
and 15 + inversion (out) initially suggested by Aspeed.

With the patch tacoma survives several gigabytes of reads and writes
using dd while without it locks up randomly during the boot process.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210625061017.1149942-1-andrew@aj.id.au
Fixes: 2fc88f92359d ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: 961216c135a8 ("ARM: dts: aspeed: Add Rainier system")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -186,6 +186,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 142/156] ARM: dts: everest: Add phase corrections for eMMC
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (140 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 141/156] ARM: dts: tacoma: Add phase corrections for eMMC Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 143/156] tcp: consistently disable header prediction for mptcp Greg Kroah-Hartman
                   ` (17 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrew Jeffery, Joel Stanley

From: Andrew Jeffery <andrew@aj.id.au>

commit faffd1b2bde3ee428d6891961f6a60f8e08749d6 upstream.

The values were determined experimentally via boot tests, not by
measuring the bus behaviour with a scope. We plan to do scope
measurements to confirm or refine the values and will update the
devicetree if necessary once these have been obtained.

However, with the patch we can write and read data without issue, where
as booting the system without the patch failed at the point of mounting
the rootfs.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210628013605.1257346-1-andrew@aj.id.au
Fixes: 2fc88f92359d ("mmc: sdhci-of-aspeed: Expose clock phase controls")
Fixes: a5c5168478d7 ("ARM: dts: aspeed: Add Everest BMC machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -1068,6 +1068,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
 };
 
 &fsim0 {



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 143/156] tcp: consistently disable header prediction for mptcp
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (141 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 142/156] ARM: dts: everest: " Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:31 ` [PATCH 5.13 144/156] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
                   ` (16 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Eric Dumazet, David S. Miller

From: Paolo Abeni <pabeni@redhat.com>

commit 71158bb1f2d2da61385c58fc1114e1a1c19984ba upstream.

The MPTCP receive path is hooked only into the TCP slow-path.
The DSS presence allows plain MPTCP traffic to hit that
consistently.

Since commit e1ff9e82e2ea ("net: mptcp: improve fallback to TCP"),
when an MPTCP socket falls back to TCP, it can hit the TCP receive
fast-path, and delay or stop triggering the event notification.

Address the issue explicitly disabling the header prediction
for MPTCP sockets.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200
Fixes: e1ff9e82e2ea ("net: mptcp: improve fallback to TCP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tcp.h |    4 ++++
 1 file changed, 4 insertions(+)

--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -682,6 +682,10 @@ static inline u32 __tcp_set_rto(const st
 
 static inline void __tcp_fast_path_on(struct tcp_sock *tp, u32 snd_wnd)
 {
+	/* mptcp hooks are only on the slow path */
+	if (sk_is_mptcp((struct sock *)tp))
+		return;
+
 	tp->pred_flags = htonl((tp->tcp_header_len << 26) |
 			       ntohl(TCP_FLAG_ACK) |
 			       snd_wnd);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 144/156] tcp: annotate data races around tp->mtu_info
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (142 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 143/156] tcp: consistently disable header prediction for mptcp Greg Kroah-Hartman
@ 2021-07-22 16:31 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 145/156] tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized Greg Kroah-Hartman
                   ` (15 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Dumazet, David S. Miller

From: Eric Dumazet <edumazet@google.com>

commit 561022acb1ce62e50f7a8258687a21b84282a4cb upstream.

While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.

Fixes: 563d34d05786 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_ipv4.c |    4 ++--
 net/ipv6/tcp_ipv6.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -342,7 +342,7 @@ void tcp_v4_mtu_reduced(struct sock *sk)
 
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
 		return;
-	mtu = tcp_sk(sk)->mtu_info;
+	mtu = READ_ONCE(tcp_sk(sk)->mtu_info);
 	dst = inet_csk_update_pmtu(sk, mtu);
 	if (!dst)
 		return;
@@ -546,7 +546,7 @@ int tcp_v4_err(struct sk_buff *skb, u32
 			if (sk->sk_state == TCP_LISTEN)
 				goto out;
 
-			tp->mtu_info = info;
+			WRITE_ONCE(tp->mtu_info, info);
 			if (!sock_owned_by_user(sk)) {
 				tcp_v4_mtu_reduced(sk);
 			} else {
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -352,7 +352,7 @@ static void tcp_v6_mtu_reduced(struct so
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
 		return;
 
-	dst = inet6_csk_update_pmtu(sk, tcp_sk(sk)->mtu_info);
+	dst = inet6_csk_update_pmtu(sk, READ_ONCE(tcp_sk(sk)->mtu_info));
 	if (!dst)
 		return;
 
@@ -443,7 +443,7 @@ static int tcp_v6_err(struct sk_buff *sk
 		if (!ip6_sk_accept_pmtu(sk))
 			goto out;
 
-		tp->mtu_info = ntohl(info);
+		WRITE_ONCE(tp->mtu_info, ntohl(info));
 		if (!sock_owned_by_user(sk))
 			tcp_v6_mtu_reduced(sk);
 		else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 145/156] tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (143 preceding siblings ...)
  2021-07-22 16:31 ` [PATCH 5.13 144/156] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 146/156] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
                   ` (14 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, syzbot+f1e24a0594d4e3a895d3,
	Nguyen Dinh Phi, Neal Cardwell, David S. Miller

From: Nguyen Dinh Phi <phind.uet@gmail.com>

commit be5d1b61a2ad28c7e57fe8bfa277373e8ecffcdc upstream.

This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.

The buggy scenario constructed by syzkaller was something like:

(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
    which calls:
       tcp_set_congestion_control() ->
         tcp_reinit_congestion_control() ->
           tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
    set icsk_ca_initialized=0 (without first calling cc->release()),
    call tcp_init_congestion_control() again.

Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.

The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find).

Fixes: 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already")
Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5921,8 +5921,8 @@ void tcp_init_transfer(struct sock *sk,
 		tp->snd_cwnd = tcp_init_cwnd(tp, __sk_dst_get(sk));
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 
-	icsk->icsk_ca_initialized = 0;
 	bpf_skops_established(sk, bpf_op, skb);
+	/* Initialize congestion control unless BPF initialized it already: */
 	if (!icsk->icsk_ca_initialized)
 		tcp_init_congestion_control(sk);
 	tcp_init_buffer_space(sk);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 146/156] ipv6: tcp: drop silly ICMPv6 packet too big messages
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (144 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 145/156] tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 147/156] tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path Greg Kroah-Hartman
                   ` (13 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Dumazet,
	Maciej Żenczykowski, Martin KaFai Lau, David S. Miller

From: Eric Dumazet <edumazet@google.com>

commit c7bb4b89033b764eb07db4e060548a6311d801ee upstream.

While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.

IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()

ip6_protocol_deliver_rcu()
 icmpv6_rcv()
  icmpv6_notify()
   tcp_v6_err()
    tcp_v6_mtu_reduced()
     inet6_csk_update_pmtu()
      ip6_rt_update_pmtu()
       __ip6_rt_update_pmtu()
        ip6_rt_cache_alloc()
         ip6_dst_alloc()
          dst_alloc()
           ip6_dst_gc()
            fib6_run_gc()
             spin_lock_bh() ...

Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.

We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.

These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240

TCP stack can filter some silly requests :

1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.

This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.

Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)

v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    1 +
 net/ipv6/tcp_ipv6.c   |   19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1732,6 +1732,7 @@ int tcp_mtu_to_mss(struct sock *sk, int
 	return __tcp_mtu_to_mss(sk, pmtu) -
 	       (tcp_sk(sk)->tcp_header_len - sizeof(struct tcphdr));
 }
+EXPORT_SYMBOL(tcp_mtu_to_mss);
 
 /* Inverse of above */
 int tcp_mss_to_mtu(struct sock *sk, int mss)
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -348,11 +348,20 @@ failure:
 static void tcp_v6_mtu_reduced(struct sock *sk)
 {
 	struct dst_entry *dst;
+	u32 mtu;
 
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
 		return;
 
-	dst = inet6_csk_update_pmtu(sk, READ_ONCE(tcp_sk(sk)->mtu_info));
+	mtu = READ_ONCE(tcp_sk(sk)->mtu_info);
+
+	/* Drop requests trying to increase our current mss.
+	 * Check done in __ip6_rt_update_pmtu() is too late.
+	 */
+	if (tcp_mtu_to_mss(sk, mtu) >= tcp_sk(sk)->mss_cache)
+		return;
+
+	dst = inet6_csk_update_pmtu(sk, mtu);
 	if (!dst)
 		return;
 
@@ -433,6 +442,8 @@ static int tcp_v6_err(struct sk_buff *sk
 	}
 
 	if (type == ICMPV6_PKT_TOOBIG) {
+		u32 mtu = ntohl(info);
+
 		/* We are not interested in TCP_LISTEN and open_requests
 		 * (SYN-ACKs send out by Linux are always <576bytes so
 		 * they should go through unfragmented).
@@ -443,7 +454,11 @@ static int tcp_v6_err(struct sk_buff *sk
 		if (!ip6_sk_accept_pmtu(sk))
 			goto out;
 
-		WRITE_ONCE(tp->mtu_info, ntohl(info));
+		if (mtu < IPV6_MIN_MTU)
+			goto out;
+
+		WRITE_ONCE(tp->mtu_info, mtu);
+
 		if (!sock_owned_by_user(sk))
 			tcp_v6_mtu_reduced(sk);
 		else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 147/156] tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (145 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 146/156] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 148/156] tools: bpf: Fix error in make -C tools/ bpf_install Greg Kroah-Hartman
                   ` (12 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Talal Ahmad, Willem de Bruijn,
	Wei Wang, Soheil Hassas Yeganeh, Eric Dumazet, David S. Miller

From: Talal Ahmad <talalahmad@google.com>

commit 358ed624207012f03318235017ac6fb41f8af592 upstream.

sk_wmem_schedule makes sure that sk_forward_alloc has enough
bytes for charging that is going to be done by sk_mem_charge.

In the transmit zerocopy path, there is sk_mem_charge but there was
no call to sk_wmem_schedule. This change adds that call.

Without this call to sk_wmem_schedule, sk_forward_alloc can go
negetive which is a bug because sk_forward_alloc is a per-socket
space that has been forward charged so this can't be negative.

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1375,6 +1375,9 @@ new_segment:
 			}
 			pfrag->offset += copy;
 		} else {
+			if (!sk_wmem_schedule(sk, copy))
+				goto wait_for_space;
+
 			err = skb_zerocopy_iter_stream(sk, skb, msg, copy, uarg);
 			if (err == -EMSGSIZE || err == -EEXIST) {
 				tcp_mark_push(tp, skb);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 148/156] tools: bpf: Fix error in make -C tools/ bpf_install
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (146 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 147/156] tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 149/156] bpftool: Properly close va_list ap by va_end() on error Greg Kroah-Hartman
                   ` (11 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wei Li, Andrii Nakryiko

From: Wei Li <liwei391@huawei.com>

commit 1d719254c139fb62fb8056fb496b6fd007e71550 upstream.

make[2]: *** No rule to make target 'install'.  Stop.
make[1]: *** [Makefile:122: runqslower_install] Error 2
make: *** [Makefile:116: bpf_install] Error 2

There is no rule for target 'install' in tools/bpf/runqslower/Makefile,
and there is no need to install it, so just remove 'runqslower_install'.

Fixes: 9c01546d26d2 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/bpf/Makefile |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/tools/bpf/Makefile
+++ b/tools/bpf/Makefile
@@ -97,7 +97,7 @@ clean: bpftool_clean runqslower_clean re
 	$(Q)$(RM) -- $(OUTPUT)FEATURE-DUMP.bpf
 	$(Q)$(RM) -r -- $(OUTPUT)feature
 
-install: $(PROGS) bpftool_install runqslower_install
+install: $(PROGS) bpftool_install
 	$(call QUIET_INSTALL, bpf_jit_disasm)
 	$(Q)$(INSTALL) -m 0755 -d $(DESTDIR)$(prefix)/bin
 	$(Q)$(INSTALL) $(OUTPUT)bpf_jit_disasm $(DESTDIR)$(prefix)/bin/bpf_jit_disasm
@@ -118,9 +118,6 @@ bpftool_clean:
 runqslower:
 	$(call descend,runqslower)
 
-runqslower_install:
-	$(call descend,runqslower,install)
-
 runqslower_clean:
 	$(call descend,runqslower,clean)
 
@@ -131,5 +128,5 @@ resolve_btfids_clean:
 	$(call descend,resolve_btfids,clean)
 
 .PHONY: all install clean bpftool bpftool_install bpftool_clean \
-	runqslower runqslower_install runqslower_clean \
+	runqslower runqslower_clean \
 	resolve_btfids resolve_btfids_clean



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 149/156] bpftool: Properly close va_list ap by va_end() on error
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (147 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 148/156] tools: bpf: Fix error in make -C tools/ bpf_install Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 150/156] bpf: Track subprog poke descriptors correctly and fix use-after-free Greg Kroah-Hartman
                   ` (10 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Gu Shengxian, Daniel Borkmann, Jiri Olsa

From: Gu Shengxian <gushengxian@yulong.com>

commit bc832065b60f973771ff3e657214bb21b559833c upstream.

va_list 'ap' was opened but not closed by va_end() in error case. It should
be closed by va_end() before the return.

Fixes: aa52bcbe0e72 ("tools: bpftool: Fix json dump crash on powerpc")
Signed-off-by: Gu Shengxian <gushengxian@yulong.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210706013543.671114-1-gushengxian507419@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/bpf/bpftool/jit_disasm.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -43,11 +43,13 @@ static int fprintf_json(void *out, const
 {
 	va_list ap;
 	char *s;
+	int err;
 
 	va_start(ap, fmt);
-	if (vasprintf(&s, fmt, ap) < 0)
-		return -1;
+	err = vasprintf(&s, fmt, ap);
 	va_end(ap);
+	if (err < 0)
+		return -1;
 
 	if (!oper_count) {
 		int i;



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 150/156] bpf: Track subprog poke descriptors correctly and fix use-after-free
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (148 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 149/156] bpftool: Properly close va_list ap by va_end() on error Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 151/156] perf test bpf: Free obj_buf Greg Kroah-Hartman
                   ` (9 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, John Fastabend, Alexei Starovoitov,
	Daniel Borkmann

From: John Fastabend <john.fastabend@gmail.com>

commit f263a81451c12da5a342d90572e317e611846f2c upstream.

Subprograms are calling map_poke_track(), but on program release there is no
hook to call map_poke_untrack(). However, on program release, the aux memory
(and poke descriptor table) is freed even though we still have a reference to
it in the element list of the map aux data. When we run map_poke_run(), we then
end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run():

  [...]
  [  402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
  [  402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
  [  402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G          I       5.12.0+ #399
  [  402.824715] Call Trace:
  [  402.824719]  dump_stack+0x93/0xc2
  [  402.824727]  print_address_description.constprop.0+0x1a/0x140
  [  402.824736]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824740]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824744]  kasan_report.cold+0x7c/0xd8
  [  402.824752]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824757]  prog_array_map_poke_run+0xc2/0x34e
  [  402.824765]  bpf_fd_array_map_update_elem+0x124/0x1a0
  [...]

The elements concerned are walked as follows:

    for (i = 0; i < elem->aux->size_poke_tab; i++) {
           poke = &elem->aux->poke_tab[i];
    [...]

The access to size_poke_tab is a 4 byte read, verified by checking offsets
in the KASAN dump:

  [  402.825004] The buggy address belongs to the object at ffff8881905a7800
                 which belongs to the cache kmalloc-1k of size 1024
  [  402.825008] The buggy address is located 320 bytes inside of
                 1024-byte region [ffff8881905a7800, ffff8881905a7c00)

The pahole output of bpf_prog_aux:

  struct bpf_prog_aux {
    [...]
    /* --- cacheline 5 boundary (320 bytes) --- */
    u32                        size_poke_tab;        /*   320     4 */
    [...]

In general, subprograms do not necessarily manage their own data structures.
For example, BTF func_info and linfo are just pointers to the main program
structure. This allows reference counting and cleanup to be done on the latter
which simplifies their management a bit. The aux->poke_tab struct, however,
did not follow this logic. The initial proposed fix for this use-after-free
bug further embedded poke data tracking into the subprogram with proper
reference counting. However, Daniel and Alexei questioned why we were treating
these objects special; I agree, its unnecessary. The fix here removes the per
subprogram poke table allocation and map tracking and instead simply points
the aux->poke_tab pointer at the main programs poke table. This way, map
tracking is simplified to the main program and we do not need to manage them
per subprogram.

This also means, bpf_prog_free_deferred(), which unwinds the program reference
counting and kfrees objects, needs to ensure that we don't try to double free
the poke_tab when free'ing the subprog structures. This is easily solved by
NULL'ing the poke_tab pointer. The second detail is to ensure that per
subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do
this, we add a pointer in the poke structure to point at the subprogram value
so JITs can easily check while walking the poke_tab structure if the current
entry belongs to the current program. The aux pointer is stable and therefore
suitable for such comparison. On the jit_subprogs() error path, we omit
cleaning up the poke->aux field because these are only ever referenced from
the JIT side, but on error we will never make it to the JIT, so its fine to
leave them dangling. Removing these pointers would complicate the error path
for no reason. However, we do need to untrack all poke descriptors from the
main program as otherwise they could race with the freeing of JIT memory from
the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke descriptors to
subprograms") had an off-by-one on the subprogram instruction index range
check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'.
However, subprog_end is the next subprogram's start instruction.

Fixes: a748c6975dea3 ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/net/bpf_jit_comp.c |    3 ++
 include/linux/bpf.h         |    1 
 kernel/bpf/core.c           |    8 +++++
 kernel/bpf/verifier.c       |   60 +++++++++++++++-----------------------------
 4 files changed, 32 insertions(+), 40 deletions(-)

--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -576,6 +576,9 @@ static void bpf_tail_call_direct_fixup(s
 
 	for (i = 0; i < prog->aux->size_poke_tab; i++) {
 		poke = &prog->aux->poke_tab[i];
+		if (poke->aux && poke->aux != prog->aux)
+			continue;
+
 		WARN_ON_ONCE(READ_ONCE(poke->tailcall_target_stable));
 
 		if (poke->reason != BPF_POKE_REASON_TAIL_CALL)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -777,6 +777,7 @@ struct bpf_jit_poke_descriptor {
 	void *tailcall_target;
 	void *tailcall_bypass;
 	void *bypass_addr;
+	void *aux;
 	union {
 		struct {
 			struct bpf_map *map;
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -2236,8 +2236,14 @@ static void bpf_prog_free_deferred(struc
 #endif
 	if (aux->dst_trampoline)
 		bpf_trampoline_put(aux->dst_trampoline);
-	for (i = 0; i < aux->func_cnt; i++)
+	for (i = 0; i < aux->func_cnt; i++) {
+		/* We can just unlink the subprog poke descriptor table as
+		 * it was originally linked to the main program and is also
+		 * released along with it.
+		 */
+		aux->func[i]->aux->poke_tab = NULL;
 		bpf_jit_free(aux->func[i]);
+	}
 	if (aux->func_cnt) {
 		kfree(aux->func);
 		bpf_prog_unlock_free(aux->prog);
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -12106,33 +12106,19 @@ static int jit_subprogs(struct bpf_verif
 			goto out_free;
 		func[i]->is_func = 1;
 		func[i]->aux->func_idx = i;
-		/* the btf and func_info will be freed only at prog->aux */
+		/* Below members will be freed only at prog->aux */
 		func[i]->aux->btf = prog->aux->btf;
 		func[i]->aux->func_info = prog->aux->func_info;
+		func[i]->aux->poke_tab = prog->aux->poke_tab;
+		func[i]->aux->size_poke_tab = prog->aux->size_poke_tab;
 
 		for (j = 0; j < prog->aux->size_poke_tab; j++) {
-			u32 insn_idx = prog->aux->poke_tab[j].insn_idx;
-			int ret;
+			struct bpf_jit_poke_descriptor *poke;
 
-			if (!(insn_idx >= subprog_start &&
-			      insn_idx <= subprog_end))
-				continue;
-
-			ret = bpf_jit_add_poke_descriptor(func[i],
-							  &prog->aux->poke_tab[j]);
-			if (ret < 0) {
-				verbose(env, "adding tail call poke descriptor failed\n");
-				goto out_free;
-			}
-
-			func[i]->insnsi[insn_idx - subprog_start].imm = ret + 1;
-
-			map_ptr = func[i]->aux->poke_tab[ret].tail_call.map;
-			ret = map_ptr->ops->map_poke_track(map_ptr, func[i]->aux);
-			if (ret < 0) {
-				verbose(env, "tracking tail call prog failed\n");
-				goto out_free;
-			}
+			poke = &prog->aux->poke_tab[j];
+			if (poke->insn_idx < subprog_end &&
+			    poke->insn_idx >= subprog_start)
+				poke->aux = func[i]->aux;
 		}
 
 		/* Use bpf_prog_F_tag to indicate functions in stack traces.
@@ -12163,18 +12149,6 @@ static int jit_subprogs(struct bpf_verif
 		cond_resched();
 	}
 
-	/* Untrack main program's aux structs so that during map_poke_run()
-	 * we will not stumble upon the unfilled poke descriptors; each
-	 * of the main program's poke descs got distributed across subprogs
-	 * and got tracked onto map, so we are sure that none of them will
-	 * be missed after the operation below
-	 */
-	for (i = 0; i < prog->aux->size_poke_tab; i++) {
-		map_ptr = prog->aux->poke_tab[i].tail_call.map;
-
-		map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
-	}
-
 	/* at this point all bpf functions were successfully JITed
 	 * now populate all bpf_calls with correct addresses and
 	 * run last pass of JIT
@@ -12252,14 +12226,22 @@ static int jit_subprogs(struct bpf_verif
 	bpf_prog_jit_attempt_done(prog);
 	return 0;
 out_free:
+	/* We failed JIT'ing, so at this point we need to unregister poke
+	 * descriptors from subprogs, so that kernel is not attempting to
+	 * patch it anymore as we're freeing the subprog JIT memory.
+	 */
+	for (i = 0; i < prog->aux->size_poke_tab; i++) {
+		map_ptr = prog->aux->poke_tab[i].tail_call.map;
+		map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
+	}
+	/* At this point we're guaranteed that poke descriptors are not
+	 * live anymore. We can just unlink its descriptor table as it's
+	 * released with the main prog.
+	 */
 	for (i = 0; i < env->subprog_cnt; i++) {
 		if (!func[i])
 			continue;
-
-		for (j = 0; j < func[i]->aux->size_poke_tab; j++) {
-			map_ptr = func[i]->aux->poke_tab[j].tail_call.map;
-			map_ptr->ops->map_poke_untrack(map_ptr, func[i]->aux);
-		}
+		func[i]->aux->poke_tab = NULL;
 		bpf_jit_free(func[i]);
 	}
 	kfree(func);



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 151/156] perf test bpf: Free obj_buf
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (149 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 150/156] bpf: Track subprog poke descriptors correctly and fix use-after-free Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 152/156] drm/panel: nt35510: Do not fail if DSI read fails Greg Kroah-Hartman
                   ` (8 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Riccardo Mancini, Ian Rogers,
	Jiri Olsa, Mark Rutland, Namhyung Kim, Peter Zijlstra, Wang Nan,
	Arnaldo Carvalho de Melo

From: Riccardo Mancini <rickyman7@gmail.com>

commit 937654ce497fb6e977a8c52baee5f7d9616302d9 upstream.

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

The first of these leaks is caused by obj_buf never being deallocated in
__test__bpf.

This patch adds the missing free.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com
[ Added missing stdlib.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/tests/bpf.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/tools/perf/tests/bpf.c
+++ b/tools/perf/tests/bpf.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <errno.h>
 #include <stdio.h>
+#include <stdlib.h>
 #include <sys/epoll.h>
 #include <sys/types.h>
 #include <sys/stat.h>
@@ -276,6 +277,7 @@ static int __test__bpf(int idx)
 	}
 
 out:
+	free(obj_buf);
 	bpf__clear();
 	return ret;
 }



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 152/156] drm/panel: nt35510: Do not fail if DSI read fails
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (150 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 151/156] perf test bpf: Free obj_buf Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 153/156] firmware: arm_scmi: Avoid padding in sensor message structure Greg Kroah-Hartman
                   ` (7 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stephan Gerhold, newbyte, Linus Walleij

From: Linus Walleij <linus.walleij@linaro.org>

commit 1988e0d84161dabd99d1c27033fbd6ee439bf432 upstream.

Failing to read the MTP over DSI should not bring down the
system and make us bail out from using the display, it turns
out that this happens when toggling the display off and on,
and that write is often still working so the display output
is just fine. Printing an error is enough.

Tested by killing the Gnome session repeatedly on the
Samsung Skomer.

Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels")
Cc: Stephan Gerhold <stephan@gerhold.net>
Reported-by: newbyte@disroot.org
Acked-by: Stefan Hansson <newbyte@disroot.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603231830.3200040-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/panel/panel-novatek-nt35510.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -706,9 +706,7 @@ static int nt35510_power_on(struct nt355
 	if (ret)
 		return ret;
 
-	ret = nt35510_read_id(nt);
-	if (ret)
-		return ret;
+	nt35510_read_id(nt);
 
 	/* Set up stuff in  manufacturer control, page 1 */
 	ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR,



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 153/156] firmware: arm_scmi: Avoid padding in sensor message structure
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (151 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 152/156] drm/panel: nt35510: Do not fail if DSI read fails Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 154/156] udp: annotate data races around unix_sk(sk)->gso_size Greg Kroah-Hartman
                   ` (6 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Cristian Marussi, Sudeep Holla

From: Cristian Marussi <cristian.marussi@arm.com>

commit 187a002b07e8089f0b5657eafec50b5d05625569 upstream.

scmi_resp_sensor_reading_complete structure is meant to represent an
SCMI asynchronous reading complete message. The readings field with
a 64bit type forces padding and breaks reads in scmi_sensor_reading_get.

Split it in two adjacent 32bit readings_low/high subfields to avoid the
padding within the structure. Alternatively we could to mark the structure
packed.

Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com
Fixes: e2083d3673916 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/arm_scmi/sensors.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -166,7 +166,8 @@ struct scmi_msg_sensor_reading_get {
 
 struct scmi_resp_sensor_reading_complete {
 	__le32 id;
-	__le64 readings;
+	__le32 readings_low;
+	__le32 readings_high;
 };
 
 struct scmi_sensor_reading_resp {
@@ -717,7 +718,8 @@ static int scmi_sensor_reading_get(const
 
 			resp = t->rx.buf;
 			if (le32_to_cpu(resp->id) == sensor_id)
-				*value = get_unaligned_le64(&resp->readings);
+				*value =
+					get_unaligned_le64(&resp->readings_low);
 			else
 				ret = -EPROTO;
 		}



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 154/156] udp: annotate data races around unix_sk(sk)->gso_size
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (152 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 153/156] firmware: arm_scmi: Avoid padding in sensor message structure Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 155/156] udp: properly flush normal packet at GRO time Greg Kroah-Hartman
                   ` (5 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Willem de Bruijn,
	syzbot, David S. Miller

From: Eric Dumazet <edumazet@google.com>

commit 18a419bad63b7f68a1979e28459782518e7b6bbe upstream.

Accesses to unix_sk(sk)->gso_size are lockless.
Add READ_ONCE()/WRITE_ONCE() around them.

BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg

write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1:
 udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696
 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630
 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265
 __sys_setsockopt+0x18f/0x200 net/socket.c:2104
 __do_sys_setsockopt net/socket.c:2115 [inline]
 __se_sys_setsockopt net/socket.c:2112 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0:
 udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337
 ___sys_sendmsg net/socket.c:2391 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477
 __do_sys_sendmmsg net/socket.c:2506 [inline]
 __se_sys_sendmmsg net/socket.c:2503 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x0005

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |    6 +++---
 net/ipv6/udp.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1102,7 +1102,7 @@ int udp_sendmsg(struct sock *sk, struct
 	}
 
 	ipcm_init_sk(&ipc, inet);
-	ipc.gso_size = up->gso_size;
+	ipc.gso_size = READ_ONCE(up->gso_size);
 
 	if (msg->msg_controllen) {
 		err = udp_cmsg_send(sk, msg, &ipc.gso_size);
@@ -2695,7 +2695,7 @@ int udp_lib_setsockopt(struct sock *sk,
 	case UDP_SEGMENT:
 		if (val < 0 || val > USHRT_MAX)
 			return -EINVAL;
-		up->gso_size = val;
+		WRITE_ONCE(up->gso_size, val);
 		break;
 
 	case UDP_GRO:
@@ -2790,7 +2790,7 @@ int udp_lib_getsockopt(struct sock *sk,
 		break;
 
 	case UDP_SEGMENT:
-		val = up->gso_size;
+		val = READ_ONCE(up->gso_size);
 		break;
 
 	case UDP_GRO:
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1296,7 +1296,7 @@ int udpv6_sendmsg(struct sock *sk, struc
 	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
 
 	ipcm6_init(&ipc6);
-	ipc6.gso_size = up->gso_size;
+	ipc6.gso_size = READ_ONCE(up->gso_size);
 	ipc6.sockc.tsflags = sk->sk_tsflags;
 	ipc6.sockc.mark = sk->sk_mark;
 



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 155/156] udp: properly flush normal packet at GRO time
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (153 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 154/156] udp: annotate data races around unix_sk(sk)->gso_size Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-22 16:32 ` [PATCH 5.13 156/156] mt76: mt7921: continue to probe driver when fw already downloaded Greg Kroah-Hartman
                   ` (4 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Paolo Abeni, David S. Miller,
	Matthias Treydte

From: Paolo Abeni <pabeni@redhat.com>

commit b43c8909be52f2baca8884f967b418a88424494a upstream.

If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.

Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().

Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc39990 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp_offload.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -525,8 +525,10 @@ struct sk_buff *udp_gro_receive(struct l
 
 		if ((!sk && (skb->dev->features & NETIF_F_GRO_UDP_FWD)) ||
 		    (sk && udp_sk(sk)->gro_enabled) || NAPI_GRO_CB(skb)->is_flist)
-			pp = call_gro_receive(udp_gro_receive_segment, head, skb);
-		return pp;
+			return call_gro_receive(udp_gro_receive_segment, head, skb);
+
+		/* no GRO, be sure flush the current packet */
+		goto out;
 	}
 
 	if (NAPI_GRO_CB(skb)->encap_mark ||



^ permalink raw reply	[flat|nested] 164+ messages in thread

* [PATCH 5.13 156/156] mt76: mt7921: continue to probe driver when fw already downloaded
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (154 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 155/156] udp: properly flush normal packet at GRO time Greg Kroah-Hartman
@ 2021-07-22 16:32 ` Greg Kroah-Hartman
  2021-07-23 11:56 ` [PATCH 5.13 000/156] 5.13.5-rc1 review Naresh Kamboju
                   ` (3 subsequent siblings)
  159 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-22 16:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Aaron Ma, David S. Miller

From: Aaron Ma <aaron.ma@canonical.com>

commit c34269041185dad1bab7a34f42ef9fab967a1684 upstream.

When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5

Skip firmware download and continue to probe.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -921,7 +921,7 @@ static int mt7921_load_firmware(struct m
 	ret = mt76_get_field(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_N9_RDY);
 	if (ret) {
 		dev_dbg(dev->mt76.dev, "Firmware is already download\n");
-		return -EIO;
+		goto fw_loaded;
 	}
 
 	ret = mt7921_load_patch(dev);
@@ -939,6 +939,7 @@ static int mt7921_load_firmware(struct m
 		return -EIO;
 	}
 
+fw_loaded:
 	mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_FWDL], false);
 
 #ifdef CONFIG_PM



^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (155 preceding siblings ...)
  2021-07-22 16:32 ` [PATCH 5.13 156/156] mt76: mt7921: continue to probe driver when fw already downloaded Greg Kroah-Hartman
@ 2021-07-23 11:56 ` Naresh Kamboju
  2021-07-23 12:03   ` Greg Kroah-Hartman
  2021-07-23 15:53 ` Shuah Khan
                   ` (2 subsequent siblings)
  159 siblings, 1 reply; 164+ messages in thread
From: Naresh Kamboju @ 2021-07-23 11:56 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, lkft-triage, Pavel Machek, Jon Hunter,
	Florian Fainelli, linux-stable, linux-block, linux-fsdevel,
	LTP List, Arnd Bergmann

On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.13.5 release.
> There are 156 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

The following error is due to SATA drive format failing with arm64 64k-page
size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.

First it was noticed on the stable-rc 5.13.3-rc2 kernel.

Whereas 64bit kernel and 32bit kernel pass with 4K page size.

Initially, I thought it could be a Hard drive fault but it is reproducible on
other devices but not always. Which is a blocker to bisect the problem.

The steps to reproduce:
 - Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
   - CONFIG_ARM64_64K_PAGES=y
 - format connected SATA drives and mount /scratch
 - Use the mounted /scratch for LTP runs to create and delete files from this
 - cd /opt/ltp
 - ./runltp -d /scratch -f syscalls


error log:
-------------
tst_device.c:89: TINFO: Found free device 0 '/dev/loop0'
tst_test.c:889: TINFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.8 (1-Jan-2018)
[  776.850122] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  776.874645] ata1.00: configured for UDMA/100
[  776.879042] ata1: EH complete
[  776.912010] ata1.00: exception Emask 0x20 SAct 0xc0 SErr 0x0 action
0x6 frozen
[  776.919299] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  776.926983] ata1.00: failed command: WRITE FPDMA QUEUED
[  776.932263] ata1.00: cmd 61/08:30:00:10:84/00:00:06:00:00/40 tag 6
ncq dma 4096 out
[  776.932263]          res e6/ff:00:00:00:00/00:00:00:00:e6/00 Emask
0x22 (host bus error)
[  776.948089] ata1.00: status: { Busy }
[  776.951766] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  776.957042] ata1.00: failed command: WRITE FPDMA QUEUED
[  776.962311] ata1.00: cmd 61/10:38:a8:6f:c4/00:00:06:00:00/40 tag 7
ncq dma 8192 out
[  776.962311]          res e7/ff:00:00:00:00/00:00:00:00:e7/00 Emask
0x22 (host bus error)
[  776.978139] ata1.00: status: { Busy }
[  776.981843] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  776.987128] ata1: hard resetting link
[  779.158340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  779.182864] ata1.00: configured for UDMA/100
[  779.187307] ata1: EH complete
[  779.204050] ata1.00: exception Emask 0x20 SAct 0x9000000 SErr 0x0
action 0x6 frozen
[  779.211764] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  779.219433] ata1.00: failed command: WRITE FPDMA QUEUED
[  779.224749] ata1.00: cmd 61/10:c0:a8:6f:c4/00:00:06:00:00/40 tag 24
ncq dma 8192 out
[  779.224749]          res f8/ff:00:00:00:00/00:00:00:00:f8/00 Emask
0x22 (host bus error)
[  779.240718] ata1.00: status: { Busy }
[  779.244430] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  779.249747] ata1.00: failed command: WRITE FPDMA QUEUED
[  779.255146] ata1.00: cmd 61/08:d8:00:10:84/00:00:06:00:00/40 tag 27
ncq dma 4096 out
[  779.255146]          res fb/ff:00:00:00:00/00:00:00:00:fb/00 Emask
0x22 (host bus error)
[  779.271056] ata1.00: status: { Busy }
[  779.274740] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  779.280000] ata1: hard resetting link
[  781.450339] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  781.474959] ata1.00: configured for UDMA/100
[  781.479351] ata1: EH complete
[  781.496155] ata1.00: NCQ disabled due to excessive errors
[  781.501604] ata1.00: exception Emask 0x20 SAct 0x300 SErr 0x0
action 0x6 frozen
[  781.508957] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  781.516561] ata1.00: failed command: WRITE FPDMA QUEUED
[  781.521812] ata1.00: cmd 61/10:40:a8:6f:c4/00:00:06:00:00/40 tag 8
ncq dma 8192 out
[  781.521812]          res e8/ff:00:00:00:00/00:00:00:00:e8/00 Emask
0x22 (host bus error)
[  781.537607] ata1.00: status: { Busy }
[  781.541287] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  781.546547] ata1.00: failed command: WRITE FPDMA QUEUED
[  781.551796] ata1.00: cmd 61/08:48:00:10:84/00:00:06:00:00/40 tag 9
ncq dma 4096 out
[  781.551796]          res e9/ff:00:00:00:00/00:00:00:00:e9/00 Emask
0x22 (host bus error)
[  781.567587] ata1.00: status: { Busy }
[  781.571270] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  781.576528] ata1: hard resetting link
[  783.750335] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  783.774957] ata1.00: configured for UDMA/100
[  783.779349] ata1: EH complete
[  783.796099] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  783.803199] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  783.810812] ata1.00: failed command: WRITE DMA
[  783.815281] ata1.00: cmd ca/00:10:a8:6f:c4/00:00:00:00:00/e6 tag 11
dma 8192 out
[  783.815281]          res eb/ff:00:00:00:00/00:00:00:00:eb/00 Emask
0x22 (host bus error)
[  783.830815] ata1.00: status: { Busy }
[  783.834497] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
<>
move_mount01.c:70: TPASS: Flag MO[  844.176510] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
VE_MOUNT_F_AUTOMOUNTS: move_mount() passed
[  844.194668] EXT4-fs (loop0): mounted filesystem with ordered data
mode. Opts: (null). Quota mode: none.
[  844.236136] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  844.243226] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  844.250836] ata1.00: failed command: WRITE DMA
[  844.255310] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  844.255310]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  844.270844] ata1.00: status: { Busy }
[  844.274536] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  844.279797] ata1: hard resetting link
[  846.450150] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  846.474681] ata1.00: configured for UDMA/100
[  846.479031] ata1: EH complete
[  846.500082] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  846.507202] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  846.514840] ata1.00: failed command: WRITE DMA
[  846.519314] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  846.519314]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  846.534870] ata1.00: status: { Busy }
[  846.538563] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  846.543874] ata1: hard resetting link
[  848.717983] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  848.742568] ata1.00: configured for UDMA/100
[  848.746902] ata1: EH complete
[  848.768079] ata1: limiting SATA link speed to 1.5 Gbps
[  848.773279] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  848.780390] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  848.788015] ata1.00: failed command: WRITE DMA
[  848.792493] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 17
dma 8192 out
[  848.792493]          res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask
0x22 (host bus error)
[  848.808062] ata1.00: status: { Busy }
[  848.811731] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  848.817013] ata1: hard resetting link
[  850.989969] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  856.023974] ata1.00: qc timeout (cmd 0xec)
[  856.028112] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  856.034231] ata1.00: revalidation failed (errno=-5)
[  856.039143] ata1: hard resetting link
[  858.210059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  858.234811] ata1.00: configured for UDMA/100
[  858.239135] ata1: EH complete
[  858.260066] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  858.267172] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  858.274799] ata1.00: failed command: WRITE DMA
[  858.279271] ata1.00: cmd ca/00:10:a8:98:c4/00:00:00:00:00/e6 tag 16
dma 8192 out
[  858.279271]          res f0/ff:00:00:00:00/00:00:00:00:f0/00 Emask
0x22 (host bus error)
[  858.294825] ata1.00: status: { Busy }
[  858.298519] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  858.303799] ata1: hard resetting link
[  860.473957] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  865.495874] ata1.00: qc timeout (cmd 0xec)
[  865.500007] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  865.506145] ata1.00: revalidation failed (errno=-5)
[  865.511061] ata1: hard resetting link
[  867.681960] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  867.706586] ata1.00: configured for UDMA/100
[  867.710921] ata1: EH complete
[  867.755977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  867.763068] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  867.770697] ata1.00: failed command: WRITE DMA
[  867.775176] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 17
dma 8192 out
[  867.775176]          res f1/ff:00:00:00:00/00:00:00:00:f1/00 Emask
0x22 (host bus error)
[  867.790712] ata1.00: status: { Busy }
[  867.794397] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  867.799653] ata1: hard resetting link
[  869.970127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  875.224033] ata1.00: qc timeout (cmd 0xec)
[  875.228193] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  875.234314] ata1.00: revalidation failed (errno=-5)
[  875.239227] ata1: hard resetting link
[  877.410117] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  877.434747] ata1.00: configured for UDMA/100
[  877.439076] ata1: EH complete
[  877.463959] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  877.471050] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  877.478680] ata1.00: failed command: WRITE DMA
[  877.483158] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  877.483158]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  877.498731] ata1.00: status: { Busy }
[  877.502425] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  877.507705] ata1: hard resetting link
[  879.677937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  884.695839] ata1.00: qc timeout (cmd 0xec)
[  884.699994] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  884.706114] ata1.00: revalidation failed (errno=-5)
[  884.711046] ata1: hard resetting link
[  886.881932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  886.906633] ata1.00: configured for UDMA/100
[  886.910979] ata1: EH complete
[  886.932038] ata1.00: limiting speed to UDMA/66:PIO4
[  886.936980] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  886.944092] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  886.951703] ata1.00: failed command: WRITE DMA
[  886.956193] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  886.956193]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  886.971753] ata1.00: status: { Busy }
[  886.975461] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  886.980745] ata1: hard resetting link
[  889.153927] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  894.167843] ata1.00: qc timeout (cmd 0xec)
[  894.171975] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  894.178115] ata1.00: revalidation failed (errno=-5)
[  894.183032] ata1: hard resetting link
[  896.353928] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  896.378602] ata1.00: configured for UDMA/66
[  896.382850] ata1: EH complete
[  896.404020] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  896.411126] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  896.418751] ata1.00: failed command: WRITE DMA
[  896.423222] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  896.423222]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  896.438775] ata1.00: status: { Busy }
[  896.442468] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  896.447747] ata1: hard resetting link
[  898.618002] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  903.639915] ata1.00: qc timeout (cmd 0xec)
[  903.644051] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  903.650170] ata1.00: revalidation failed (errno=-5)
[  903.655077] ata1: hard resetting link
[  905.826132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  905.850829] ata1.00: configured for UDMA/66
[  905.855065] ata1: EH complete
[  905.872021] ata1.00: limiting speed to UDMA/33:PIO4
[  905.876930] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  905.884010] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  905.891610] ata1.00: failed command: WRITE DMA
[  905.896074] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 19
dma 8192 out
[  905.896074]          res f3/ff:00:00:00:00/00:00:00:00:f3/00 Emask
0x22 (host bus error)
[  905.911604] ata1.00: status: { Busy }
[  905.915284] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  905.920538] ata1: hard resetting link
[  908.102004] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  913.111903] ata1.00: qc timeout (cmd 0xec)
[  913.116038] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  913.122158] ata1.00: revalidation failed (errno=-5)
[  913.127078] ata1: hard resetting link
[  915.297988] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  915.322600] ata1.00: configured for UDMA/33
[  915.326836] ata1: EH complete
[  915.348105] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  915.355207] ata1.00: irq_stat 0x00020002, PCI target abort while
transferring data
[  915.362815] ata1.00: failed command: WRITE DMA
[  915.367279] ata1.00: cmd ca/00:10:c0:98:c4/00:00:00:00:00/e6 tag 20
dma 8192 out
[  915.367279]          res f4/ff:00:00:00:00/00:00:00:00:f4/00 Emask
0x22 (host bus error)
[  915.382810] ata1.00: status: { Busy }
[  915.386491] ata1.00: error: { ICRC UNC AMNF IDNF ABRT }
[  915.391744] ata1: hard resetting link
[  917.561987] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  922.583901] ata1.00: qc timeout (cmd 0xec)
[  922.588049] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  922.594169] ata1.00: revalidation failed (errno=-5)
[  922.599081] ata1: hard resetting link
[  924.769981] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  924.794681] ata1.00: configured for UDMA/33
[  924.798927] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result:
hostbyte=0x00 driverbyte=0x08 cmd_age=57s
[  924.808281] sd 0:0:0:0: [sda] tag#20 Sense Key : 0xb [current]
[  924.814231] sd 0:0:0:0: [sda] tag#20 ASC=0x47 ASCQ=0x0
[  924.819483] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 06 c4
98 c0 00 00 10 00
[  924.827169] blk_update_request: I/O error, dev sda, sector
113547456 op 0x1:(WRITE) flags 0x800 phys_seg 2 prio class 0
[  924.838018] Aborting journal on device sda-8.
[  924.838036] ata1: EH complete
[  924.846735] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  924.857024] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[  924.864473] EXT4-fs (loop0): I/O error while writing superblock
move_mount01.c:70: TPASS: Flag MO[  924.884049] EXT4-fs error (device
sda): ext4_journal_check_start:83: comm loop0: Detected aborted
journal
VE_MOUNT_F_EMPTY_PATH: move_moun[  924.897412] EXT4-fs (sda):
Remounting filesystem read-only
t() passed
[  924.904884] EXT4-fs (loop0): mounting ext3 file system using the
ext4 subsystem
[  924.915569] loop: Write error at byte offset 1024, length 1024.
[  924.921550] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  924.931855] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  924.942137] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[  924.949612] EXT4-fs (loop0): I/O error while writing superblock
[  924.955578] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfi[  924.992560] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
g(FSCONFIG_CMD_CREATE) failed: EIO (5)
[  925.004493] loop: Write error at byte offset 1024, length 1024.
[  925.011723] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.022022] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.032305] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[  925.039771] EXT4-fs (loop0): I/O error while writing superblock
[  925.045757] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfi[  925.064332] EXT4-fs (loop0):
mounting ext3 file system using the ext4 subsystem
g(FSCONFIG_CMD_CREATE) failed: EIO (5)
[  925.076587] loop: Write error at byte offset 1024, length 1024.
[  925.083805] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.094103] blk_update_request: I/O error, dev loop0, sector 2 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.104386] Buffer I/O error on dev loop0, logical block 1, lost
sync page write
[  925.111838] EXT4-fs (loop0): I/O error while writing superblock
[  925.117801] EXT4-fs (loop0): mount failed
move_mount01.c:47: TFAIL: fsconfig(FSCONFIG_CMD_CREATE) failed: EIO (5)
tst_test.c:1379: TINFO: Testing on ext4
[  925.148096] loop: Write error at byte offset 0, length 65536.
[  925.155817] loop: Write error at byte offset 65536, length 65536.
[  925.162008] loop: Write error at byte offset 131072, length 65536.
[  925.168265] blk_update_request: I/O error, dev loop0, sector 0 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.168320] loop: Write error at byte offset 196608, length 65536.
[  925.178583] Buffer I/O error on dev loop0, logical block 0, lost
async page write
[  925.178641] blk_update_request: I/O error, dev loop0, sector 128 op
0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  925.184810] loop: Write error at byte offset 262144, length 65536.
[  925.192314] Buffer I/O error on dev loop0, logical block 1, lost
async page write
[  925.216549] loop: Write error at byte offset 327680, length 65536.
[  925.216555] Buffer I/O error on dev loop0, logical block 4, lost
async page write
[  925.216567] Buffer I/O error on dev loop0, logical block 2, lost
async page write
[  925.216620] Buffer I/O error on dev loop0, logical block 3, lost
async page write
[  925.222854] loop: Write error at byte offset 393216, length 65536.
[  925.230315] Buffer I/O error on dev loop0, logical block 5, lost
async page write
tst_test.c:889: TINFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.8 (1-Jan-2018)
Warning, had trouble writing out superblocks.
tst_test.c:889: TBROK: mkfs.ext4 failed with exit code 5
tst_tmpdir.c:337: TWARN: tst_rmdir:
rmobj(/scratch/ltp-TGrC0Kijpg/Nyirgt) failed:
remove(/scratch/ltp-TGrC0Kijpg/Nyirgt/mntpoint) failed; errno=30:
EROFS
Summary:
passed   9
failed   3
broken   1
skipped  0
warnings 0
tst_tmpdir.c:271: TBROK: tst_tmpdir:
mkdtemp(/scratch/ltp-TGrC0Kijpg/OXQGCk) failed: EROFS (30)

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

Full test logs,
https://lkft.validation.linaro.org/scheduler/job/3097379#L9811
https://lkft.validation.linaro.org/scheduler/job/3146329#L7071

metadata:
  git branch: linux-5.13.y
  git repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
  git commit: 80f75a7443c5c9a01f54e3df71ccd23d13c70c44
  git describe: v5.13.3-508-g80f75a7443c5
  make_kernelversion: 5.13.5-rc1
  kernel-config: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/config
  vmlinux: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/vmlinux.xz
  System.map: https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/System.map

[1] kernel Image:
https://builds.tuxbuild.com/1vg96dRUTrTU7nl6sWV2iwTwnu5/Image.gz

--
Linaro LKFT
https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-23 11:56 ` [PATCH 5.13 000/156] 5.13.5-rc1 review Naresh Kamboju
@ 2021-07-23 12:03   ` Greg Kroah-Hartman
  2021-07-23 12:25     ` Naresh Kamboju
  0 siblings, 1 reply; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-23 12:03 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, lkft-triage, Pavel Machek, Jon Hunter,
	Florian Fainelli, linux-stable, linux-block, linux-fsdevel,
	LTP List, Arnd Bergmann

On Fri, Jul 23, 2021 at 05:26:22PM +0530, Naresh Kamboju wrote:
> On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.13.5 release.
> > There are 156 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> The following error is due to SATA drive format failing with arm64 64k-page
> size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
> while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.
> 
> First it was noticed on the stable-rc 5.13.3-rc2 kernel.
> 
> Whereas 64bit kernel and 32bit kernel pass with 4K page size.
> 
> Initially, I thought it could be a Hard drive fault but it is reproducible on
> other devices but not always. Which is a blocker to bisect the problem.
> 
> The steps to reproduce:
>  - Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
>    - CONFIG_ARM64_64K_PAGES=y
>  - format connected SATA drives and mount /scratch
>  - Use the mounted /scratch for LTP runs to create and delete files from this
>  - cd /opt/ltp
>  - ./runltp -d /scratch -f syscalls

And does that also fail for 5.13.2?


^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-23 12:03   ` Greg Kroah-Hartman
@ 2021-07-23 12:25     ` Naresh Kamboju
  2021-07-23 13:19       ` Greg Kroah-Hartman
  0 siblings, 1 reply; 164+ messages in thread
From: Naresh Kamboju @ 2021-07-23 12:25 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, lkft-triage, Pavel Machek, Jon Hunter,
	Florian Fainelli, linux-stable, linux-block, linux-fsdevel,
	LTP List, Arnd Bergmann

On Fri, 23 Jul 2021 at 17:33, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Fri, Jul 23, 2021 at 05:26:22PM +0530, Naresh Kamboju wrote:
> > On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 5.13.5 release.
> > > There are 156 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> > > or in the git tree and branch at:
> > >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > The following error is due to SATA drive format failing with arm64 64k-page
> > size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
> > while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.
> >
> > First it was noticed on the stable-rc 5.13.3-rc2 kernel.
> >
> > Whereas 64bit kernel and 32bit kernel pass with 4K page size.
> >
> > Initially, I thought it could be a Hard drive fault but it is reproducible on
> > other devices but not always. Which is a blocker to bisect the problem.
> >
> > The steps to reproduce:
> >  - Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
> >    - CONFIG_ARM64_64K_PAGES=y
> >  - format connected SATA drives and mount /scratch
> >  - Use the mounted /scratch for LTP runs to create and delete files from this
> >  - cd /opt/ltp
> >  - ./runltp -d /scratch -f syscalls
>
> And does that also fail for 5.13.2?

Yes. It failed on 5.13.2 also.

Ref failed log:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.13.y/build/v5.13.2/testrun/5147287/suite/ltp-syscalls-tests/test/copy_file_range01/log

- Naresh

^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-23 12:25     ` Naresh Kamboju
@ 2021-07-23 13:19       ` Greg Kroah-Hartman
  0 siblings, 0 replies; 164+ messages in thread
From: Greg Kroah-Hartman @ 2021-07-23 13:19 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, lkft-triage, Pavel Machek, Jon Hunter,
	Florian Fainelli, linux-stable, linux-block, linux-fsdevel,
	LTP List, Arnd Bergmann

On Fri, Jul 23, 2021 at 05:55:15PM +0530, Naresh Kamboju wrote:
> On Fri, 23 Jul 2021 at 17:33, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Fri, Jul 23, 2021 at 05:26:22PM +0530, Naresh Kamboju wrote:
> > > On Thu, 22 Jul 2021 at 22:17, Greg Kroah-Hartman
> > > <gregkh@linuxfoundation.org> wrote:
> > > >
> > > > This is the start of the stable review cycle for the 5.13.5 release.
> > > > There are 156 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> > > > Anything received after that time might be too late.
> > > >
> > > > The whole patch series can be found in one patch at:
> > > >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> > > > or in the git tree and branch at:
> > > >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> > > > and the diffstat can be found below.
> > > >
> > > > thanks,
> > > >
> > > > greg k-h
> > >
> > > The following error is due to SATA drive format failing with arm64 64k-page
> > > size ( CONFIG_ARM64_64K_PAGES=y ) kernel.
> > > while running LTP syscalls test suite on running 5.13.3 and 5.13.5-rc1 kernel.
> > >
> > > First it was noticed on the stable-rc 5.13.3-rc2 kernel.
> > >
> > > Whereas 64bit kernel and 32bit kernel pass with 4K page size.
> > >
> > > Initially, I thought it could be a Hard drive fault but it is reproducible on
> > > other devices but not always. Which is a blocker to bisect the problem.
> > >
> > > The steps to reproduce:
> > >  - Boot arm64 juno device with 64k page stable-rc 5.13 kernel Image [1]
> > >    - CONFIG_ARM64_64K_PAGES=y
> > >  - format connected SATA drives and mount /scratch
> > >  - Use the mounted /scratch for LTP runs to create and delete files from this
> > >  - cd /opt/ltp
> > >  - ./runltp -d /scratch -f syscalls
> >
> > And does that also fail for 5.13.2?
> 
> Yes. It failed on 5.13.2 also.
> 
> Ref failed log:
> https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.13.y/build/v5.13.2/testrun/5147287/suite/ltp-syscalls-tests/test/copy_file_range01/log

Great, not a new problem?

5.13.0?

bisection would be most helpful.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (156 preceding siblings ...)
  2021-07-23 11:56 ` [PATCH 5.13 000/156] 5.13.5-rc1 review Naresh Kamboju
@ 2021-07-23 15:53 ` Shuah Khan
  2021-07-23 17:22 ` Florian Fainelli
  2021-07-23 21:17 ` Guenter Roeck
  159 siblings, 0 replies; 164+ messages in thread
From: Shuah Khan @ 2021-07-23 15:53 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
	jonathanh, f.fainelli, stable, Shuah Khan

On 7/22/21 10:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.13.5 release.
> There are 156 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (157 preceding siblings ...)
  2021-07-23 15:53 ` Shuah Khan
@ 2021-07-23 17:22 ` Florian Fainelli
  2021-07-23 21:17 ` Guenter Roeck
  159 siblings, 0 replies; 164+ messages in thread
From: Florian Fainelli @ 2021-07-23 17:22 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
	jonathanh, stable



On 7/22/2021 9:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.13.5 release.
> There are 156 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.13.5-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.13.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

^ permalink raw reply	[flat|nested] 164+ messages in thread

* Re: [PATCH 5.13 000/156] 5.13.5-rc1 review
  2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
                   ` (158 preceding siblings ...)
  2021-07-23 17:22 ` Florian Fainelli
@ 2021-07-23 21:17 ` Guenter Roeck
  159 siblings, 0 replies; 164+ messages in thread
From: Guenter Roeck @ 2021-07-23 21:17 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
	jonathanh, f.fainelli, stable

On Thu, Jul 22, 2021 at 06:29:35PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.13.5 release.
> There are 156 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 24 Jul 2021 15:56:00 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 154 pass: 153 fail: 1
Failed builds:
	riscv:allmodconfig
Qemu test results:
	total: 469 pass: 469 fail: 0

riscv:allmodconfig:

cc1: error: '9880' is not a valid offset in '-mstack-protector-guard-offset='

as usual.

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

^ permalink raw reply	[flat|nested] 164+ messages in thread

end of thread, other threads:[~2021-07-23 21:17 UTC | newest]

Thread overview: 164+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-22 16:29 [PATCH 5.13 000/156] 5.13.5-rc1 review Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 001/156] ARM: dts: gemini: rename mdio to the right name Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 002/156] ARM: dts: gemini: add device_type on pci Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 003/156] ARM: dts: rockchip: Fix thermal sensor cells o rk322x Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 004/156] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 005/156] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 006/156] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 007/156] ARM: dts: rockchip: Fix the timer clocks order Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 008/156] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 009/156] ARM: dts: rockchip: Fix power-controller node names for rk3066a Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 010/156] ARM: dts: rockchip: Fix power-controller node names for rk3188 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 011/156] ARM: dts: rockchip: Fix power-controller node names for rk3288 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 012/156] arm64: dts: rockchip: Fix power-controller node names for px30 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 013/156] arm64: dts: rockchip: Fix power-controller node names for rk3328 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 014/156] arm64: dts: rockchip: Fix power-controller node names for rk3399 Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 015/156] reset: ti-syscon: fix to_ti_syscon_reset_data macro Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 016/156] ARM: dts: BCM5301X: Fix NAND nodes names Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 017/156] ARM: brcmstb: dts: fix " Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 018/156] ARM: Cygnus: " Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 019/156] ARM: NSP: " Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 020/156] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 021/156] ARM: dts: Hurricane 2: " Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 022/156] ARM: dts: BCM5301X: Fix pinmux subnodes names Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 023/156] soc: bcm: brcmstb: remove unused variable brcmstb_machine_match Greg Kroah-Hartman
2021-07-22 16:29 ` [PATCH 5.13 024/156] soc: mediatek: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 025/156] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 026/156] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 027/156] arm64: dts: rockchip: fix regulator-gpio states array Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 028/156] ARM: dts: ux500: Fix interrupt cells Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 029/156] ARM: dts: ux500: Rename gpio-controller node Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 030/156] ARM: dts: ux500: Fix orientation of accelerometer Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 031/156] ARM: dts: ux500: Fix some compatible strings Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 032/156] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 033/156] ARM: dts: ux500: Fix orientation of Janice accelerometer Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 034/156] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 035/156] arm64: dts: renesas: beacon: Fix USB extal reference Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 036/156] arm64: dts: renesas: beacon: Fix USB ref clock references Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 037/156] kbuild: sink stdout from cmd for silent build Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 038/156] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 039/156] ARM: dts: am437x-gp-evm: " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 040/156] ARM: dts: am335x: " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 041/156] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 042/156] arm64: tegra: Add PMU node for Tegra194 Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 043/156] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 044/156] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 045/156] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 046/156] arm64: dts: qcom: sm8350: fix the node unit addresses Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 047/156] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work) Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 048/156] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 049/156] arm64: dts: qcom: sc7180: Move rmtfs memory region Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 050/156] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 051/156] ARM: dts: stm32: Fix touchscreen node " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 052/156] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 053/156] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 054/156] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 055/156] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 056/156] memory: tegra: Fix compilation warnings on 64bit platforms Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 057/156] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 058/156] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 059/156] ARM: dts: aspeed: Everest: Fix cable card PCA chips Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 060/156] ARM: dts: bcm283x: Fix up MMC node names Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 061/156] ARM: dts: bcm283x: Fix up GPIO LED " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 062/156] i3c: master: svc: drop free_irq of devm_request_irq allocated irq Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 063/156] arm64: dts: juno: Update SCPI nodes as per the YAML schema Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 064/156] ARM: dts: rockchip: fix supply properties in io-domains nodes Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 065/156] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 066/156] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 067/156] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 068/156] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 069/156] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 070/156] ARM: dts: stm32: Rename eth@N to ethernet@N " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 071/156] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 072/156] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 073/156] arm64: dts: qcom: sc7180: Add wakeup delay for adau codec Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 074/156] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 075/156] soc/tegra: fuse: Fix Tegra234-only builds Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 076/156] firmware: tegra: bpmp: " Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 077/156] arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 078/156] arm64: dts: ls208xa: remove bus-num from dspi node Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 079/156] arm64: dts: imx8mn-beacon-som: Assign PMIC clock Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 080/156] arm64: dts: imx8mq: assign PCIe clocks Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 081/156] arm64: dts: imx8: conn: fix enet clock setting Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 082/156] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 083/156] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 Greg Kroah-Hartman
2021-07-22 16:30 ` [PATCH 5.13 084/156] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 085/156] thermal/drivers/sprd: " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 086/156] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 087/156] arm64: dts: qcom: sm8150: Disable Adreno and modem by default Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 088/156] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 089/156] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 090/156] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 091/156] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 092/156] scsi: libsas: Add LUN number check in .slave_alloc callback Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 093/156] scsi: libfc: Fix array index out of bound exception Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 094/156] scsi: qedf: Add check to synchronize abort and flush Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 095/156] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 096/156] perf/x86/intel/uncore: Clean up error handling path of iio mapping Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 097/156] thermal/core/thermal_of: Stop zone device before unregistering it Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 098/156] s390/traps: do not test MONITOR CALL without CONFIG_BUG Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 099/156] s390: introduce proper type handling call_on_stack() macro Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 100/156] cifs: prevent NULL deref in cifs_compose_mount_options() Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 101/156] firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 102/156] arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 103/156] Revert "swap: fix do_swap_page() race with swapoff" Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 104/156] Revert "mm/shmem: fix shmem_swapin() " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 105/156] mm/thp: simplify copying of huge zero page pmd when fork Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 106/156] mm/userfaultfd: fix uffd-wp special cases for fork() Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 107/156] f2fs: Show casefolding support only when supported Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 108/156] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 109/156] net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 110/156] net: dsa: mv88e6xxx: use correct .stats_set_histogram() " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 111/156] net: dsa: mv88e6xxx: enable .rmu_disable() " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 112/156] net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 113/156] net: dsa: mv88e6xxx: enable SerDes RX stats " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 114/156] net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 115/156] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 116/156] netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 117/156] net/sched: act_ct: fix err check for nf_conntrack_confirm Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 118/156] netfilter: nf_tables: Fix dereference of null pointer flow Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 119/156] vmxnet3: fix cksum offload issues for tunnels with non-default udp ports Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 120/156] net/sched: act_ct: remove and free nf_table callbacks Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 121/156] net: bridge: sync fdb to new unicast-filtering ports Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 122/156] net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 123/156] net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 124/156] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 125/156] net: ip_tunnel: fix mtu calculation for ETHER tunnel devices Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 126/156] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 127/156] net: qcom/emac: fix UAF in emac_remove Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 128/156] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 129/156] net: send SYNACK packet with accepted fwmark Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 130/156] net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 131/156] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 132/156] net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 133/156] net: fddi: fix UAF in fza_probe Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 134/156] dma-buf/sync_file: Dont leak fences on merge failure Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 135/156] kbuild: do not suppress Kconfig prompts for silent build Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 136/156] vboxsf: Honor excl flag to the dir-inode create op Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 137/156] vboxsf: Make vboxsf_dir_create() return the handle for the created file Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 138/156] vboxsf: Add vboxsf_[create|release]_sf_handle() helpers Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 139/156] vboxsf: Add support for the atomic_open directory-inode op Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 140/156] ARM: dts: aspeed: Fix AST2600 machines line names Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 141/156] ARM: dts: tacoma: Add phase corrections for eMMC Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 142/156] ARM: dts: everest: " Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 143/156] tcp: consistently disable header prediction for mptcp Greg Kroah-Hartman
2021-07-22 16:31 ` [PATCH 5.13 144/156] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 145/156] tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 146/156] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 147/156] tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 148/156] tools: bpf: Fix error in make -C tools/ bpf_install Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 149/156] bpftool: Properly close va_list ap by va_end() on error Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 150/156] bpf: Track subprog poke descriptors correctly and fix use-after-free Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 151/156] perf test bpf: Free obj_buf Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 152/156] drm/panel: nt35510: Do not fail if DSI read fails Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 153/156] firmware: arm_scmi: Avoid padding in sensor message structure Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 154/156] udp: annotate data races around unix_sk(sk)->gso_size Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 155/156] udp: properly flush normal packet at GRO time Greg Kroah-Hartman
2021-07-22 16:32 ` [PATCH 5.13 156/156] mt76: mt7921: continue to probe driver when fw already downloaded Greg Kroah-Hartman
2021-07-23 11:56 ` [PATCH 5.13 000/156] 5.13.5-rc1 review Naresh Kamboju
2021-07-23 12:03   ` Greg Kroah-Hartman
2021-07-23 12:25     ` Naresh Kamboju
2021-07-23 13:19       ` Greg Kroah-Hartman
2021-07-23 15:53 ` Shuah Khan
2021-07-23 17:22 ` Florian Fainelli
2021-07-23 21:17 ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).