netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes
@ 2019-08-26 21:31 Marek Behún
  2019-08-26 21:31 ` [PATCH net-next v5 1/6] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler Marek Behún
                   ` (6 more replies)
  0 siblings, 7 replies; 13+ messages in thread
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
  To: Vivien Didelot
  Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean, Marek Behún

Hello,

this is the fifth version of changes for the Topaz/Peridot family of
switches. The patches apply on net-next.
Changes since v4:
 - added Reviewed-by and Tested-by tags on first 2 patches, the others
   are changed are affected by changes in patch 3/6, so I did not add
   the tags, except for 5/6, which is just macro renaming
 - patch 3 was changed: the serdes_get_lane returns 0 on success (lane
   was discovered), -ENODEV if not lane is present on the port, and
   other error if other error occured. Lane is put into a pointer of
   type u8
 - patches 4 and 6 were affected by this (error detecting from
   serdes_get_lane)
 - Andrew's complaint about the two additional parameters
   (allow_over_2500 and make_cmode_writable) was addressed, by Vivien's
   advice: I put a new method into chip operations structure, named
   port_set_cmode_writable. This is called from mv88e6xxx_port_setup_mac
   just before port_set_cmode. The method is implemented for Topaz.
   The check if cmodes over 2500 should be allowed on given port is now
   done in the specific port_set_cmode() that requires it, thus the
   allow_over_2500 argument is not needed

Again, tested on Turris Mox with Peridot, Topaz, and Peridot + Topaz.

Marek

Marek Behún (6):
  net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
  net: dsa: mv88e6xxx: update code operating on hidden registers
  net: dsa: mv88e6xxx: create serdes_get_lane chip operation
  net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot
  net: dsa: mv88e6xxx: rename port cmode macro
  net: dsa: mv88e6xxx: fully support SERDES on Topaz family

 drivers/net/dsa/mv88e6xxx/Makefile      |   1 +
 drivers/net/dsa/mv88e6xxx/chip.c        |  96 +++----
 drivers/net/dsa/mv88e6xxx/chip.h        |   4 +
 drivers/net/dsa/mv88e6xxx/port.c        |  89 +++++--
 drivers/net/dsa/mv88e6xxx/port.h        |  31 ++-
 drivers/net/dsa/mv88e6xxx/port_hidden.c |  70 +++++
 drivers/net/dsa/mv88e6xxx/serdes.c      | 325 ++++++++++++------------
 drivers/net/dsa/mv88e6xxx/serdes.h      |  27 +-
 8 files changed, 379 insertions(+), 264 deletions(-)
 create mode 100644 drivers/net/dsa/mv88e6xxx/port_hidden.c

-- 
2.21.0


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2019-08-28  4:42 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-26 21:31 [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 1/6] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 2/6] net: dsa: mv88e6xxx: update code operating on hidden registers Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 3/6] net: dsa: mv88e6xxx: create serdes_get_lane chip operation Marek Behún
2019-08-26 22:17   ` Vivien Didelot
2019-08-27 13:52   ` Andrew Lunn
2019-08-26 21:31 ` [PATCH net-next v5 4/6] net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot Marek Behún
2019-08-27 13:54   ` Andrew Lunn
2019-08-26 21:31 ` [PATCH net-next v5 5/6] net: dsa: mv88e6xxx: rename port cmode macro Marek Behún
2019-08-26 21:31 ` [PATCH net-next v5 6/6] net: dsa: mv88e6xxx: fully support SERDES on Topaz family Marek Behún
2019-08-26 22:05   ` Vivien Didelot
2019-08-27 13:57   ` Andrew Lunn
2019-08-28  4:42 ` [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).