qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, beata.michalska@linaro.org
Subject: [Qemu-devel] [PATCH for-4.2 23/24] target/arm: Update {fp, sve}_exception_el for VHE
Date: Fri, 19 Jul 2019 14:03:25 -0700	[thread overview]
Message-ID: <20190719210326.15466-24-richard.henderson@linaro.org> (raw)
In-Reply-To: <20190719210326.15466-1-richard.henderson@linaro.org>

When TGE+E2H are both set, CPACR_EL1 is ignored.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/helper.c | 53 ++++++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 25 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index ae3ec9ea67..bbe36eb3a9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5501,7 +5501,9 @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = {
 int sve_exception_el(CPUARMState *env, int el)
 {
 #ifndef CONFIG_USER_ONLY
-    if (el <= 1) {
+    uint64_t hcr_el2 = arm_hcr_el2_eff(env);
+
+    if (el <= 1 && (hcr_el2 & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
         bool disabled = false;
 
         /* The CPACR.ZEN controls traps to EL1:
@@ -5516,8 +5518,7 @@ int sve_exception_el(CPUARMState *env, int el)
         }
         if (disabled) {
             /* route_to_el2 */
-            return (arm_feature(env, ARM_FEATURE_EL2)
-                    && (arm_hcr_el2_eff(env) & HCR_TGE) ? 2 : 1);
+            return hcr_el2 & HCR_TGE ? 2 : 1;
         }
 
         /* Check CPACR.FPEN.  */
@@ -11212,8 +11213,6 @@ uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes)
 int fp_exception_el(CPUARMState *env, int cur_el)
 {
 #ifndef CONFIG_USER_ONLY
-    int fpen;
-
     /* CPACR and the CPTR registers don't exist before v6, so FP is
      * always accessible
      */
@@ -11241,30 +11240,34 @@ int fp_exception_el(CPUARMState *env, int cur_el)
      * 0, 2 : trap EL0 and EL1/PL1 accesses
      * 1    : trap only EL0 accesses
      * 3    : trap no accesses
+     * This register is ignored if E2H+TGE are both set.
      */
-    fpen = extract32(env->cp15.cpacr_el1, 20, 2);
-    switch (fpen) {
-    case 0:
-    case 2:
-        if (cur_el == 0 || cur_el == 1) {
-            /* Trap to PL1, which might be EL1 or EL3 */
-            if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
+    if ((arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
+        int fpen = extract32(env->cp15.cpacr_el1, 20, 2);
+
+        switch (fpen) {
+        case 0:
+        case 2:
+            if (cur_el == 0 || cur_el == 1) {
+                /* Trap to PL1, which might be EL1 or EL3 */
+                if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
+                    return 3;
+                }
+                return 1;
+            }
+            if (cur_el == 3 && !is_a64(env)) {
+                /* Secure PL1 running at EL3 */
                 return 3;
             }
-            return 1;
+            break;
+        case 1:
+            if (cur_el == 0) {
+                return 1;
+            }
+            break;
+        case 3:
+            break;
         }
-        if (cur_el == 3 && !is_a64(env)) {
-            /* Secure PL1 running at EL3 */
-            return 3;
-        }
-        break;
-    case 1:
-        if (cur_el == 0) {
-            return 1;
-        }
-        break;
-    case 3:
-        break;
     }
 
     /*
-- 
2.17.1



  parent reply	other threads:[~2019-07-19 21:49 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19 21:03 [Qemu-devel] [PATCH for-4.2 00/24] target/arm: Implement ARMv8.1-VHE Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 01/24] cputlb: Add tlb_set_asid_for_mmuidx Richard Henderson
2019-07-22  9:53   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 02/24] cputlb: Add tlb_flush_asid_by_mmuidx and friends Richard Henderson
2019-07-22 10:04   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 03/24] target/arm: Install ASIDs for long-form from EL1 Richard Henderson
2019-07-22 15:28   ` Alex Bennée
2019-07-22 15:48     ` Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 04/24] target/arm: Install ASIDs for short-form " Richard Henderson
2019-07-24 11:47   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 05/24] target/arm: Install ASIDs for EL2 Richard Henderson
2019-07-24 11:49   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 06/24] target/arm: Define isar_feature_aa64_vh Richard Henderson
2019-07-24 12:59   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 07/24] target/arm: Enable HCR_E2H for VHE Richard Henderson
2019-07-24 13:01   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 08/24] target/arm: Add CONTEXTIDR_EL2 Richard Henderson
2019-07-24 13:57   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 09/24] target/arm: Add TTBR1_EL2 Richard Henderson
2019-07-24 14:12   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 10/24] target/arm: Update CNTVCT_EL0 for VHE Richard Henderson
2019-07-24 14:47   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 11/24] target/arm: Add the hypervisor virtual counter Richard Henderson
2019-07-24 20:05   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 12/24] target/arm: Add VHE system register redirection and aliasing Richard Henderson
2019-07-25 14:01   ` Alex Bennée
2019-07-25 14:24     ` Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 13/24] target/arm: Split out vae1_tlbmask, vmalle1_tlbmask Richard Henderson
2019-07-25 14:02   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 14/24] target/arm: Simplify tlb_force_broadcast alternatives Richard Henderson
2019-07-25 14:08   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 15/24] target/arm: Reorganize ARMMMUIdx Richard Henderson
2019-07-25 15:57   ` Alex Bennée
2019-07-25 18:18     ` Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 16/24] target/arm: Add regime_has_2_ranges Richard Henderson
2019-07-25 15:59   ` Alex Bennée
2019-07-25 18:28     ` Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 17/24] target/arm: Update arm_mmu_idx for VHE Richard Henderson
2019-07-25 16:01   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 18/24] target/arm: Update arm_sctlr " Richard Henderson
2019-07-25 16:02   ` Alex Bennée
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 19/24] target/arm: Install asids for E2&0 translation regime Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 20/24] target/arm: Flush tlbs " Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 21/24] target/arm: Update arm_phys_excp_target_el for TGE Richard Henderson
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 22/24] target/arm: Update regime_is_user for EL2&0 Richard Henderson
2019-07-19 21:03 ` Richard Henderson [this message]
2019-07-19 21:03 ` [Qemu-devel] [PATCH for-4.2 24/24] target/arm: Enable ARMv8.1-VHE in -cpu max Richard Henderson
2019-07-22  7:31 ` [Qemu-devel] [PATCH for-4.2 00/24] target/arm: Implement ARMv8.1-VHE Alex Bennée
2019-07-22  9:37   ` Alex Bennée
2019-07-22 15:10     ` Richard Henderson
2019-07-25 16:15 ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190719210326.15466-24-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=beata.michalska@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).