From: Hal Feng <hal.feng@starfivetech.com> To: <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org> Cc: Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Philipp Zabel <p.zabel@pengutronix.de>, "Rob Herring" <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor@kernel.org>, "Palmer Dabbelt" <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Ben Dooks <ben.dooks@sifive.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Emil Renner Berthing <emil.renner.berthing@canonical.com>, Hal Feng <hal.feng@starfivetech.com>, <linux-kernel@vger.kernel.org> Subject: [PATCH v4 19/19] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Date: Tue, 21 Feb 2023 10:46:45 +0800 [thread overview] Message-ID: <20230221024645.127922-20-hal.feng@starfivetech.com> (raw) In-Reply-To: <20230221024645.127922-1-hal.feng@starfivetech.com> From: Emil Renner Berthing <kernel@esmil.dk> Add a minimal device tree for StarFive JH7110 VisionFive 2 board which has version A and version B. Support booting and basic clock/reset/pinctrl/uart drivers. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Co-developed-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> --- arch/riscv/boot/dts/starfive/Makefile | 6 +- .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++ .../jh7110-starfive-visionfive-2-v1.3b.dts | 13 ++ .../jh7110-starfive-visionfive-2.dtsi | 215 ++++++++++++++++++ 4 files changed, 246 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 039c143cba33..cd73519b907b 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -1,2 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb + +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts new file mode 100644 index 000000000000..4af3300f3cf3 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.2A"; + compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts new file mode 100644 index 000000000000..9230cc3d8946 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.3B"; + compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi new file mode 100644 index 000000000000..c2aa8946a0f1 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <4000000>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&sysgpio { + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; +}; -- 2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com> To: <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org> Cc: Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Philipp Zabel <p.zabel@pengutronix.de>, "Rob Herring" <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor@kernel.org>, "Palmer Dabbelt" <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Ben Dooks <ben.dooks@sifive.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Emil Renner Berthing <emil.renner.berthing@canonical.com>, Hal Feng <hal.feng@starfivetech.com>, <linux-kernel@vger.kernel.org> Subject: [PATCH v4 19/19] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Date: Tue, 21 Feb 2023 10:46:45 +0800 [thread overview] Message-ID: <20230221024645.127922-20-hal.feng@starfivetech.com> (raw) In-Reply-To: <20230221024645.127922-1-hal.feng@starfivetech.com> From: Emil Renner Berthing <kernel@esmil.dk> Add a minimal device tree for StarFive JH7110 VisionFive 2 board which has version A and version B. Support booting and basic clock/reset/pinctrl/uart drivers. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Co-developed-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> --- arch/riscv/boot/dts/starfive/Makefile | 6 +- .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++ .../jh7110-starfive-visionfive-2-v1.3b.dts | 13 ++ .../jh7110-starfive-visionfive-2.dtsi | 215 ++++++++++++++++++ 4 files changed, 246 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 039c143cba33..cd73519b907b 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -1,2 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb + +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts new file mode 100644 index 000000000000..4af3300f3cf3 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.2A"; + compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts new file mode 100644 index 000000000000..9230cc3d8946 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.3B"; + compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi new file mode 100644 index 000000000000..c2aa8946a0f1 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <4000000>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&sysgpio { + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; +}; -- 2.38.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-02-21 2:48 UTC|newest] Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-21 2:46 [PATCH v4 00/19] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 01/19] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 02/19] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 03/19] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 04/19] reset: Create subdirectory for StarFive drivers Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 05/19] reset: starfive: Factor out common JH71X0 reset code Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:10 ` Conor Dooley 2023-02-21 17:10 ` Conor Dooley 2023-02-21 2:46 ` [PATCH v4 06/19] reset: starfive: Extract the " Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:13 ` Conor Dooley 2023-02-21 17:13 ` Conor Dooley 2023-02-21 2:46 ` [PATCH v4 07/19] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:17 ` Conor Dooley 2023-02-21 17:17 ` Conor Dooley 2023-02-21 2:46 ` [PATCH v4 08/19] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 09/19] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:23 ` Conor Dooley 2023-02-21 17:23 ` Conor Dooley 2023-02-23 3:40 ` Hal Feng 2023-02-23 3:40 ` Hal Feng 2023-02-22 9:13 ` Krzysztof Kozlowski 2023-02-22 9:13 ` Krzysztof Kozlowski 2023-02-22 10:40 ` Conor Dooley 2023-02-22 10:40 ` Conor Dooley 2023-02-23 10:22 ` Hal Feng 2023-02-23 10:22 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 10/19] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:26 ` Conor Dooley 2023-02-21 17:26 ` Conor Dooley 2023-02-23 5:52 ` Hal Feng 2023-02-23 5:52 ` Hal Feng 2023-03-09 14:22 ` Geert Uytterhoeven 2023-03-09 14:22 ` Geert Uytterhoeven 2023-03-13 2:29 ` Hal Feng 2023-03-13 2:29 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 11/19] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 15:12 ` Conor Dooley 2023-02-21 15:12 ` Conor Dooley 2023-02-23 6:17 ` Hal Feng 2023-02-23 6:17 ` Hal Feng 2023-02-26 16:07 ` Emil Renner Berthing 2023-02-26 16:07 ` Emil Renner Berthing 2023-02-28 2:30 ` Hal Feng 2023-02-28 2:30 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 12/19] clk: starfive: Add StarFive JH7110 always-on " Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-26 17:34 ` Emil Renner Berthing 2023-02-26 17:34 ` Emil Renner Berthing 2023-02-28 2:42 ` Hal Feng 2023-02-28 2:42 ` Hal Feng 2023-03-09 9:43 ` Hal Feng 2023-03-09 9:43 ` Hal Feng 2023-03-09 14:06 ` Emil Renner Berthing 2023-03-09 14:06 ` Emil Renner Berthing 2023-03-09 18:11 ` Conor Dooley 2023-03-09 18:11 ` Conor Dooley 2023-03-09 18:19 ` Emil Renner Berthing 2023-03-09 18:19 ` Emil Renner Berthing 2023-03-09 19:32 ` Palmer Dabbelt 2023-03-09 19:32 ` Palmer Dabbelt 2023-02-21 2:46 ` [PATCH v4 13/19] reset: starfive: Add StarFive JH7110 reset driver Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 15:33 ` Emil Renner Berthing 2023-02-21 15:33 ` Emil Renner Berthing 2023-02-21 16:34 ` Conor Dooley 2023-02-21 16:34 ` Conor Dooley 2023-02-23 6:48 ` Hal Feng 2023-02-23 6:48 ` Hal Feng 2023-02-23 6:29 ` Hal Feng 2023-02-23 6:29 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 14/19] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 15/19] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` [PATCH v4 16/19] dt-bindings: riscv: Add SiFive S7 compatible Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 11:38 ` Krzysztof Kozlowski 2023-02-21 11:38 ` Krzysztof Kozlowski 2023-02-21 15:10 ` Conor Dooley 2023-02-21 15:10 ` Conor Dooley 2023-02-21 2:46 ` [PATCH v4 17/19] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 17:03 ` Conor Dooley 2023-02-21 17:03 ` Conor Dooley 2023-02-23 7:16 ` Hal Feng 2023-02-23 7:16 ` Hal Feng 2023-02-27 18:10 ` Conor Dooley 2023-02-27 18:10 ` Conor Dooley 2023-02-21 2:46 ` [PATCH v4 18/19] riscv: dts: starfive: Add StarFive JH7110 pin function definitions Hal Feng 2023-02-21 2:46 ` Hal Feng 2023-02-21 2:46 ` Hal Feng [this message] 2023-02-21 2:46 ` [PATCH v4 19/19] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree Hal Feng 2023-02-21 15:03 ` Emil Renner Berthing 2023-02-21 15:03 ` Emil Renner Berthing 2023-02-23 8:50 ` Hal Feng 2023-02-23 8:50 ` Hal Feng 2023-02-27 18:12 ` Conor Dooley 2023-02-27 18:12 ` Conor Dooley 2023-02-27 20:00 ` Conor Dooley 2023-02-27 20:00 ` Conor Dooley 2023-02-28 2:58 ` Hal Feng 2023-02-28 2:58 ` Hal Feng 2023-02-22 15:00 ` [PATCH v4 00/19] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC patchwork-bot+linux-riscv 2023-02-22 15:00 ` patchwork-bot+linux-riscv 2023-02-22 15:35 ` Conor Dooley 2023-03-03 19:08 ` Tommaso Merciai 2023-03-03 19:08 ` Tommaso Merciai 2023-03-06 3:29 ` Hal Feng 2023-03-06 3:29 ` Hal Feng 2023-03-06 10:22 ` Tommaso Merciai 2023-03-06 10:22 ` Tommaso Merciai 2023-03-07 8:36 ` Hal Feng 2023-03-07 8:36 ` Hal Feng 2023-03-07 8:51 ` Conor Dooley 2023-03-07 8:51 ` Conor Dooley 2023-03-07 10:08 ` Hal Feng 2023-03-07 10:08 ` Hal Feng 2023-03-08 12:28 ` Tommaso Merciai 2023-03-08 12:28 ` Tommaso Merciai 2023-03-08 13:36 ` Conor Dooley 2023-03-08 13:36 ` Conor Dooley 2023-03-09 16:49 ` Tommaso Merciai 2023-03-09 16:49 ` Tommaso Merciai 2023-03-09 17:52 ` Conor Dooley 2023-03-09 17:52 ` Conor Dooley 2023-03-09 18:58 ` Tommaso Merciai 2023-03-09 18:58 ` Tommaso Merciai 2023-03-09 19:03 ` Conor Dooley 2023-03-09 19:03 ` Conor Dooley 2023-03-10 7:48 ` Tommaso Merciai 2023-03-10 7:48 ` Tommaso Merciai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230221024645.127922-20-hal.feng@starfivetech.com \ --to=hal.feng@starfivetech.com \ --cc=aou@eecs.berkeley.edu \ --cc=ben.dooks@sifive.com \ --cc=conor@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=emil.renner.berthing@canonical.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=maz@kernel.org \ --cc=mturquette@baylibre.com \ --cc=p.zabel@pengutronix.de \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.