From: Samuel Holland <samuel@sholland.org>
To: u-boot@lists.denx.de, Jagan Teki <jagan@amarulasolutions.com>,
Andre Przywara <andre.przywara@arm.com>
Cc: Sean Anderson <seanga2@gmail.com>, Simon Glass <sjg@chromium.org>,
Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
Samuel Holland <samuel@sholland.org>, Heiko Schocher <hs@denx.de>,
Joe Hershberger <joe.hershberger@ni.com>
Subject: [PATCH v2 00/23] sunxi: Add and use a pinctrl driver
Date: Thu, 17 Mar 2022 22:53:57 -0500 [thread overview]
Message-ID: <20220318035420.15058-1-samuel@sholland.org> (raw)
This series resolves some longstanding TODOs by implementing a pinctrl
driver for sunxi platforms and converting DM drivers to use it.
Changes in v2:
- Merge all SoC drivers into one file and one U_BOOT_DRIVER.
- Add a consumer for the APB bus clock
- Add support for the F1C100s SoC
Samuel Holland (23):
sunxi: pinctrl: Create the driver skeleton
sunxi: pinctrl: Implement pin muxing functions
sunxi: pinctrl: Implement get_pin_muxing function
sunxi: pinctrl: Implement pin configuration
pinctrl: sunxi: Add UART pinmuxes
sunxi: Skip non-DM UART pin setup when PINCTRL=y
pinctrl: sunxi: Add sun4i EMAC pinmuxes
net: sunxi_emac: Remove non-DM pin setup
pinctrl: sunxi: Add sunxi GMAC pinmuxes
sunxi: Remove non-DM GMAC pin setup
pinctrl: sunxi: Add sun8i EMAC pinmuxes
net: sun8i_emac: Remove non-DM pin setup
pinctrl: sunxi: Add I2C pinmuxes
sunxi: Remove options and setup code for I2C2-I2C4
sunxi: Remove non-DM I2C clock/pin setup from U-Boot
i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C
i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C
pinctrl: sunxi: Add MMC pinmuxes
sunxi: Remove non-DM MMC pin setup
pinctrl: sunxi: Add the A64 PWM pinmux
pwm: sunxi: Remove non-DM pin setup
pinctrl: sunxi: Add SPI0 pinmuxes
spi: sun4i_spi: Remove non-DM pin setup
MAINTAINERS | 1 +
arch/arm/Kconfig | 1 +
arch/arm/include/asm/arch-sunxi/gpio.h | 17 +-
arch/arm/include/asm/arch-sunxi/i2c.h | 11 +-
arch/arm/mach-sunxi/Kconfig | 22 -
arch/arm/mach-sunxi/board.c | 2 +
board/sunxi/board.c | 67 --
board/sunxi/gmac.c | 55 --
drivers/gpio/sunxi_gpio.c | 130 +---
drivers/i2c/sun6i_p2wi.c | 12 +-
drivers/i2c/sun8i_rsb.c | 46 +-
drivers/net/sun8i_emac.c | 90 ---
drivers/net/sunxi_emac.c | 7 +-
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 2 +-
drivers/pinctrl/sunxi/Kconfig | 127 ++++
drivers/pinctrl/sunxi/Makefile | 3 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 887 +++++++++++++++++++++++++
drivers/pwm/sunxi_pwm.c | 11 -
drivers/spi/spi-sunxi.c | 84 ---
20 files changed, 1057 insertions(+), 519 deletions(-)
create mode 100644 drivers/pinctrl/sunxi/Kconfig
create mode 100644 drivers/pinctrl/sunxi/Makefile
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sunxi.c
--
2.33.1
next reply other threads:[~2022-03-18 3:54 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-18 3:53 Samuel Holland [this message]
2022-03-18 3:53 ` [PATCH v2 01/23] sunxi: pinctrl: Create the driver skeleton Samuel Holland
2022-03-18 3:53 ` [PATCH v2 02/23] sunxi: pinctrl: Implement pin muxing functions Samuel Holland
2022-03-31 23:34 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 03/23] sunxi: pinctrl: Implement get_pin_muxing function Samuel Holland
2022-03-31 23:36 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 04/23] sunxi: pinctrl: Implement pin configuration Samuel Holland
2022-03-18 3:54 ` [PATCH v2 05/23] pinctrl: sunxi: Add UART pinmuxes Samuel Holland
2022-03-31 23:18 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y Samuel Holland
2022-03-31 23:19 ` Andre Przywara
2022-03-31 23:59 ` Samuel Holland
2022-03-18 3:54 ` [PATCH v2 07/23] pinctrl: sunxi: Add sun4i EMAC pinmuxes Samuel Holland
2022-03-31 23:19 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 08/23] net: sunxi_emac: Remove non-DM pin setup Samuel Holland
2022-03-31 23:19 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 09/23] pinctrl: sunxi: Add sunxi GMAC pinmuxes Samuel Holland
2022-03-31 23:19 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 11/23] pinctrl: sunxi: Add sun8i EMAC pinmuxes Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 12/23] net: sun8i_emac: Remove non-DM pin setup Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 13/23] pinctrl: sunxi: Add I2C pinmuxes Samuel Holland
2022-03-27 17:22 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 14/23] sunxi: Remove options and setup code for I2C2-I2C4 Samuel Holland
2022-03-18 3:54 ` [PATCH v2 15/23] sunxi: Remove non-DM I2C clock/pin setup from U-Boot Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-04-01 0:04 ` Samuel Holland
2022-03-18 3:54 ` [PATCH v2 16/23] i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 17/23] i2c: sun8i_rsb: " Samuel Holland
2022-03-20 7:17 ` Heinrich Schuchardt
2022-03-20 7:22 ` Heinrich Schuchardt
2022-03-31 23:20 ` Andre Przywara
2022-04-01 0:10 ` Samuel Holland
2022-03-18 3:54 ` [PATCH v2 18/23] pinctrl: sunxi: Add MMC pinmuxes Samuel Holland
2022-03-31 23:20 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 19/23] sunxi: Remove non-DM MMC pin setup Samuel Holland
2022-03-31 23:21 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 20/23] pinctrl: sunxi: Add the A64 PWM pinmux Samuel Holland
2022-03-31 23:21 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 21/23] pwm: sunxi: Remove non-DM pin setup Samuel Holland
2022-03-31 23:21 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 22/23] pinctrl: sunxi: Add SPI0 pinmuxes Samuel Holland
2022-03-31 23:21 ` Andre Przywara
2022-03-18 3:54 ` [PATCH v2 23/23] spi: sun4i_spi: Remove non-DM pin setup Samuel Holland
2022-03-31 23:21 ` Andre Przywara
2022-04-04 0:54 ` [PATCH v2 00/23] sunxi: Add and use a pinctrl driver Andre Przywara
2022-04-04 1:24 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220318035420.15058-1-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=andre.przywara@arm.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=hs@denx.de \
--cc=jagan@amarulasolutions.com \
--cc=joe.hershberger@ni.com \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).