u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Samuel Holland <samuel@sholland.org>
Cc: u-boot@lists.denx.de, Jagan Teki <jagan@amarulasolutions.com>,
	Sean Anderson <seanga2@gmail.com>, Simon Glass <sjg@chromium.org>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	Heiko Schocher <hs@denx.de>,
	Joe Hershberger <joe.hershberger@ni.com>
Subject: Re: [PATCH v2 02/23] sunxi: pinctrl: Implement pin muxing functions
Date: Fri, 1 Apr 2022 00:34:23 +0100	[thread overview]
Message-ID: <20220401003423.6c64b5da@slackpad.lan> (raw)
In-Reply-To: <20220318035420.15058-3-samuel@sholland.org>

On Thu, 17 Mar 2022 22:53:59 -0500
Samuel Holland <samuel@sholland.org> wrote:

Hi Samuel,

> Implement the operations to get pin and function names, and to set the
> mux for a pin. The pin count and pin names are calculated as if each
> bank has the maximum number of pins. Function names are simply the index
> into a list of { function name, mux value } pairs.

Thank you very much for this neat and lean solution, I like that.

> We assume all pins associated with a function use the same mux value for
> that function. This is generally true within a group of pins on a single
> port, but generally false when some peripheral can be muxed to multiple
> ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H.
> But all of the port D pins use the same mux value, and so do all of the
> port H pins. This applies even when the pins for some function are not
> contiguous, and when the lower-numbered mux values are unused. A good
> example of both of these cases is SPI0 on most SoCs.

This is only *almost* universally true, however, but the exceptions are
not relevant for U-Boot, as it affects some multimedia functions only.
One example I could quickly find is CSI on the H6, for instance.

> This strategy saves a lot of space (which is especially important for
> SPL), but where the mux value for a certain function differs across
> ports, it forces us to choose a single port for that function at build
> time. Since almost all boards use the default (i.e. reference design)
> pin muxes[1], this is unlikely to be a problem.

Yes, I can live with that restriction. Should we come to a point where
we need non-consistent muxes across different ports, we can always add
a "port" member to struct sunxi_pinctrl_function, and encode 0 as
"don't care", so we would just need to explicitly add that to the groups
that actually differ.

Can you add at least a short summary of your commit message
(that it is a simplified mapping, and just noting the restrictions) to
the code as a comment, just before the struct sunxi_pinctrl_function
declaration? I am not sure this nice explanation will be found
easily otherwise. Or you copy the whole explanation in, I don't mind.

Cheers,
Andre


> 
> [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection")
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> 
> (no changes since v1)
> 
>  drivers/pinctrl/sunxi/Kconfig         |   1 +
>  drivers/pinctrl/sunxi/pinctrl-sunxi.c | 227 ++++++++++++++++++++++++++
>  2 files changed, 228 insertions(+)
> 
> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
> index 96c2f35f3a..f4949f89e0 100644
> --- a/drivers/pinctrl/sunxi/Kconfig
> +++ b/drivers/pinctrl/sunxi/Kconfig
> @@ -5,6 +5,7 @@ if ARCH_SUNXI
>  config PINCTRL_SUNXI
>  	select PINCTRL_FULL
>  	select PINCTRL_GENERIC
> +	select PINMUX
>  	bool
>  
>  config PINCTRL_SUNIV_F1C100S
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 43bb1ec650..6ea8245c8e 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -12,7 +12,14 @@
>  
>  extern U_BOOT_DRIVER(gpio_sunxi);
>  
> +struct sunxi_pinctrl_function {
> +	const char	name[sizeof("gpio_out")];
> +	u8		mux;
> +};
> +
>  struct sunxi_pinctrl_desc {
> +	const struct sunxi_pinctrl_function	*functions;
> +	u8					num_functions;
>  	u8					first_bank;
>  	u8					num_banks;
>  };
> @@ -21,7 +28,66 @@ struct sunxi_pinctrl_plat {
>  	struct sunxi_gpio __iomem *base;
>  };
>  
> +static int sunxi_pinctrl_get_pins_count(struct udevice *dev)
> +{
> +	const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
> +
> +	return desc->num_banks * SUNXI_GPIOS_PER_BANK;
> +}
> +
> +static const char *sunxi_pinctrl_get_pin_name(struct udevice *dev,
> +					      uint pin_selector)
> +{
> +	const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
> +	static char pin_name[sizeof("PN31")];
> +
> +	snprintf(pin_name, sizeof(pin_name), "P%c%d",
> +		 pin_selector / SUNXI_GPIOS_PER_BANK + desc->first_bank + 'A',
> +		 pin_selector % SUNXI_GPIOS_PER_BANK);
> +
> +	return pin_name;
> +}
> +
> +static int sunxi_pinctrl_get_functions_count(struct udevice *dev)
> +{
> +	const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
> +
> +	return desc->num_functions;
> +}
> +
> +static const char *sunxi_pinctrl_get_function_name(struct udevice *dev,
> +						   uint func_selector)
> +{
> +	const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
> +
> +	return desc->functions[func_selector].name;
> +}
> +
> +static int sunxi_pinctrl_pinmux_set(struct udevice *dev, uint pin_selector,
> +				    uint func_selector)
> +{
> +	const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
> +	struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
> +	int bank = pin_selector / SUNXI_GPIOS_PER_BANK;
> +	int pin	 = pin_selector % SUNXI_GPIOS_PER_BANK;
> +
> +	debug("set mux: %-4s => %s (%d)\n",
> +	      sunxi_pinctrl_get_pin_name(dev, pin_selector),
> +	      sunxi_pinctrl_get_function_name(dev, func_selector),
> +	      desc->functions[func_selector].mux);
> +
> +	sunxi_gpio_set_cfgbank(plat->base + bank, pin,
> +			       desc->functions[func_selector].mux);
> +
> +	return 0;
> +}
> +
>  static const struct pinctrl_ops sunxi_pinctrl_ops = {
> +	.get_pins_count		= sunxi_pinctrl_get_pins_count,
> +	.get_pin_name		= sunxi_pinctrl_get_pin_name,
> +	.get_functions_count	= sunxi_pinctrl_get_functions_count,
> +	.get_function_name	= sunxi_pinctrl_get_function_name,
> +	.pinmux_set		= sunxi_pinctrl_pinmux_set,
>  	.set_state		= pinctrl_generic_set_state,
>  };
>  
> @@ -76,117 +142,278 @@ static int sunxi_pinctrl_probe(struct udevice *dev)
>  	return 0;
>  }
>  
> +static const struct sunxi_pinctrl_function suniv_f1c100s_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused suniv_f1c100s_pinctrl_desc = {
> +	.functions	= suniv_f1c100s_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(suniv_f1c100s_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 6,
>  };
>  
> +static const struct sunxi_pinctrl_function sun4i_a10_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun4i_a10_pinctrl_desc = {
> +	.functions	= sun4i_a10_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun4i_a10_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 9,
>  };
>  
> +static const struct sunxi_pinctrl_function sun5i_a13_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun5i_a13_pinctrl_desc = {
> +	.functions	= sun5i_a13_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun5i_a13_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 7,
>  };
>  
> +static const struct sunxi_pinctrl_function sun6i_a31_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_pinctrl_desc = {
> +	.functions	= sun6i_a31_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun6i_a31_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_r_pinctrl_desc = {
> +	.functions	= sun6i_a31_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun6i_a31_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 2,
>  };
>  
> +static const struct sunxi_pinctrl_function sun7i_a20_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun7i_a20_pinctrl_desc = {
> +	.functions	= sun7i_a20_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun7i_a20_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 9,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_a23_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_pinctrl_desc = {
> +	.functions	= sun8i_a23_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_a23_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_r_pinctrl_desc = {
> +	.functions	= sun8i_a23_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_a23_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 1,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_a33_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a33_pinctrl_desc = {
> +	.functions	= sun8i_a33_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_a33_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_a83t_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_pinctrl_desc = {
> +	.functions	= sun8i_a83t_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_a83t_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_r_pinctrl_desc = {
> +	.functions	= sun8i_a83t_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_a83t_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 1,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_h3_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_pinctrl_desc = {
> +	.functions	= sun8i_h3_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_h3_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 7,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_h3_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_r_pinctrl_desc = {
> +	.functions	= sun8i_h3_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_h3_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 1,
>  };
>  
> +static const struct sunxi_pinctrl_function sun8i_v3s_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun8i_v3s_pinctrl_desc = {
> +	.functions	= sun8i_v3s_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun8i_v3s_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 7,
>  };
>  
> +static const struct sunxi_pinctrl_function sun9i_a80_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_pinctrl_desc = {
> +	.functions	= sun9i_a80_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun9i_a80_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_r_pinctrl_desc = {
> +	.functions	= sun9i_a80_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun9i_a80_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 3,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_a64_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_pinctrl_desc = {
> +	.functions	= sun50i_a64_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_a64_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_r_pinctrl_desc = {
> +	.functions	= sun50i_a64_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_a64_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 1,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_h5_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h5_pinctrl_desc = {
> +	.functions	= sun50i_h5_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_h5_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 7,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_h6_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_pinctrl_desc = {
> +	.functions	= sun50i_h6_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_h6_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 8,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_r_pinctrl_desc = {
> +	.functions	= sun50i_h6_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_h6_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 2,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_h616_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_pinctrl_desc = {
> +	.functions	= sun50i_h616_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_h616_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_A,
>  	.num_banks	= 9,
>  };
>  
> +static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = {
> +	{ "gpio_in",	0 },
> +	{ "gpio_out",	1 },
> +};
> +
>  static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_r_pinctrl_desc = {
> +	.functions	= sun50i_h616_r_pinctrl_functions,
> +	.num_functions	= ARRAY_SIZE(sun50i_h616_r_pinctrl_functions),
>  	.first_bank	= SUNXI_GPIO_L,
>  	.num_banks	= 1,
>  };


  reply	other threads:[~2022-03-31 23:44 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-18  3:53 [PATCH v2 00/23] sunxi: Add and use a pinctrl driver Samuel Holland
2022-03-18  3:53 ` [PATCH v2 01/23] sunxi: pinctrl: Create the driver skeleton Samuel Holland
2022-03-18  3:53 ` [PATCH v2 02/23] sunxi: pinctrl: Implement pin muxing functions Samuel Holland
2022-03-31 23:34   ` Andre Przywara [this message]
2022-03-18  3:54 ` [PATCH v2 03/23] sunxi: pinctrl: Implement get_pin_muxing function Samuel Holland
2022-03-31 23:36   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 04/23] sunxi: pinctrl: Implement pin configuration Samuel Holland
2022-03-18  3:54 ` [PATCH v2 05/23] pinctrl: sunxi: Add UART pinmuxes Samuel Holland
2022-03-31 23:18   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y Samuel Holland
2022-03-31 23:19   ` Andre Przywara
2022-03-31 23:59     ` Samuel Holland
2022-03-18  3:54 ` [PATCH v2 07/23] pinctrl: sunxi: Add sun4i EMAC pinmuxes Samuel Holland
2022-03-31 23:19   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 08/23] net: sunxi_emac: Remove non-DM pin setup Samuel Holland
2022-03-31 23:19   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 09/23] pinctrl: sunxi: Add sunxi GMAC pinmuxes Samuel Holland
2022-03-31 23:19   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 11/23] pinctrl: sunxi: Add sun8i EMAC pinmuxes Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 12/23] net: sun8i_emac: Remove non-DM pin setup Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 13/23] pinctrl: sunxi: Add I2C pinmuxes Samuel Holland
2022-03-27 17:22   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 14/23] sunxi: Remove options and setup code for I2C2-I2C4 Samuel Holland
2022-03-18  3:54 ` [PATCH v2 15/23] sunxi: Remove non-DM I2C clock/pin setup from U-Boot Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-04-01  0:04     ` Samuel Holland
2022-03-18  3:54 ` [PATCH v2 16/23] i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 17/23] i2c: sun8i_rsb: " Samuel Holland
2022-03-20  7:17   ` Heinrich Schuchardt
2022-03-20  7:22     ` Heinrich Schuchardt
2022-03-31 23:20   ` Andre Przywara
2022-04-01  0:10     ` Samuel Holland
2022-03-18  3:54 ` [PATCH v2 18/23] pinctrl: sunxi: Add MMC pinmuxes Samuel Holland
2022-03-31 23:20   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 19/23] sunxi: Remove non-DM MMC pin setup Samuel Holland
2022-03-31 23:21   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 20/23] pinctrl: sunxi: Add the A64 PWM pinmux Samuel Holland
2022-03-31 23:21   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 21/23] pwm: sunxi: Remove non-DM pin setup Samuel Holland
2022-03-31 23:21   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 22/23] pinctrl: sunxi: Add SPI0 pinmuxes Samuel Holland
2022-03-31 23:21   ` Andre Przywara
2022-03-18  3:54 ` [PATCH v2 23/23] spi: sun4i_spi: Remove non-DM pin setup Samuel Holland
2022-03-31 23:21   ` Andre Przywara
2022-04-04  0:54 ` [PATCH v2 00/23] sunxi: Add and use a pinctrl driver Andre Przywara
2022-04-04  1:24   ` Samuel Holland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220401003423.6c64b5da@slackpad.lan \
    --to=andre.przywara@arm.com \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=hs@denx.de \
    --cc=jagan@amarulasolutions.com \
    --cc=joe.hershberger@ni.com \
    --cc=samuel@sholland.org \
    --cc=seanga2@gmail.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).