[PATCH v2 08/23] net: sunxi_emac: Remove non-DM pin setup

[Samuel Holland <samuel@sholland.org>]

This is now handled automatically by the pinctrl driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v1)

 arch/arm/include/asm/arch-sunxi/gpio.h | 1 -
 drivers/net/sunxi_emac.c               | 7 +------
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 773711b6a3..e93c9e84c9 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -135,7 +135,6 @@ enum sunxi_gpio_number {
 #define SUNXI_GPIO_OUTPUT	1
 #define SUNXI_GPIO_DISABLE	7
 
-#define SUNXI_GPA_EMAC		2
 #define SUN6I_GPA_GMAC		2
 #define SUN7I_GPA_GMAC		5
 #define SUN8I_H3_GPA_UART0	2
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index 17ad88e732..d15b0add7c 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -17,7 +17,6 @@
 #include <net.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
 
 /* EMAC register  */
 struct emac_regs {
@@ -511,15 +510,11 @@ static int sunxi_emac_board_setup(struct udevice *dev,
 	struct sunxi_sramc_regs *sram =
 		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
 	struct emac_regs *regs = priv->regs;
-	int pin, ret;
+	int ret;
 
 	/* Map SRAM to EMAC */
 	setbits_le32(&sram->ctrl1, 0x5 << 2);
 
-	/* Configure pin mux settings for MII Ethernet */
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
-
 	/* Set up clock gating */
 	ret = clk_enable(&priv->clk);
 	if (ret) {
-- 
2.33.1