All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Huang <wei@redhat.com>
To: Shannon Zhao <shannon.zhao@linaro.org>, kvmarm@lists.cs.columbia.edu
Cc: kvm@vger.kernel.org, marc.zyngier@arm.com, will.deacon@arm.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register
Date: Fri, 16 Oct 2015 00:35:50 -0500	[thread overview]
Message-ID: <56208CB6.1050508@redhat.com> (raw)
In-Reply-To: <1443133885-3366-5-git-send-email-shannon.zhao@linaro.org>



On 09/24/2015 05:31 PM, Shannon Zhao wrote:
> Add reset handler which gets host value of PMCR_EL0 and make writable
> bits architecturally UNKNOWN. Add a common access handler for PMU
> registers which emulates writing and reading register and add emulation
> for PMCR.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/kvm/sys_regs.c | 81 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 79 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index b41607d..60c0842 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -33,6 +33,7 @@
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_host.h>
>  #include <asm/kvm_mmu.h>
> +#include <asm/pmu.h>
>  
>  #include <trace/events/kvm.h>
>  
> @@ -446,6 +447,53 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>  	vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
>  }
>  
> +static void vcpu_sysreg_write(struct kvm_vcpu *vcpu,
> +			      const struct sys_reg_desc *r, u64 val)
> +{
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		vcpu_sys_reg(vcpu, r->reg) = val;
> +	else
> +		vcpu_cp15(vcpu, r->reg) = lower_32_bits(val);
> +}
> +
> +static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> +{
> +	u64 pmcr, val;
> +
> +	asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr));
> +	/* Writable bits of PMCR_EL0 (ARMV8_PMCR_MASK) is reset to UNKNOWN*/
> +	val = (pmcr & ~ARMV8_PMCR_MASK) | (ARMV8_PMCR_MASK & 0xdecafbad);

Two comments:
(1) In Patch 1, ARMV8_PMCR_MASK is defined as 0x3f. According to ARMv8
spec, PMCR_EL0.LC (bit 6) is also writable. Should ARMV8_PMCR_MASK be 0x7f?
(2) According to spec the PMCR_EL0.E bit reset to 0, not UNKNOWN.


> +	vcpu_sysreg_write(vcpu, r, val);
> +}
> +
> +/* PMU registers accessor. */
> +static bool access_pmu_regs(struct kvm_vcpu *vcpu,
> +			    const struct sys_reg_params *p,
> +			    const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case PMCR_EL0: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_sys_reg(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_sys_reg(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_sys_reg(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
>  #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
>  	/* DBGBVRn_EL1 */						\
> @@ -637,7 +685,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  
>  	/* PMCR_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
> -	  trap_raz_wi },
> +	  access_pmu_regs, reset_pmcr, PMCR_EL0, },
>  	/* PMCNTENSET_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
>  	  trap_raz_wi },
> @@ -871,6 +919,34 @@ static const struct sys_reg_desc cp14_64_regs[] = {
>  	{ Op1( 0), CRm( 2), .access = trap_raz_wi },
>  };
>  
> +/* PMU CP15 registers accessor. */
> +static bool access_pmu_cp15_regs(struct kvm_vcpu *vcpu,
> +				 const struct sys_reg_params *p,
> +				 const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case c9_PMCR: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_cp15(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_cp15(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_cp15(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /*
>   * Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
>   * depending on the way they are accessed (as a 32bit or a 64bit
> @@ -899,7 +975,8 @@ static const struct sys_reg_desc cp15_regs[] = {
>  	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
>  
>  	/* PMU */
> -	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
> +	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmu_cp15_regs,
> +	  reset_pmcr, c9_PMCR },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
> 

WARNING: multiple messages have this Message-ID (diff)
From: wei@redhat.com (Wei Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register
Date: Fri, 16 Oct 2015 00:35:50 -0500	[thread overview]
Message-ID: <56208CB6.1050508@redhat.com> (raw)
In-Reply-To: <1443133885-3366-5-git-send-email-shannon.zhao@linaro.org>



On 09/24/2015 05:31 PM, Shannon Zhao wrote:
> Add reset handler which gets host value of PMCR_EL0 and make writable
> bits architecturally UNKNOWN. Add a common access handler for PMU
> registers which emulates writing and reading register and add emulation
> for PMCR.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
>  arch/arm64/kvm/sys_regs.c | 81 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 79 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index b41607d..60c0842 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -33,6 +33,7 @@
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_host.h>
>  #include <asm/kvm_mmu.h>
> +#include <asm/pmu.h>
>  
>  #include <trace/events/kvm.h>
>  
> @@ -446,6 +447,53 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>  	vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
>  }
>  
> +static void vcpu_sysreg_write(struct kvm_vcpu *vcpu,
> +			      const struct sys_reg_desc *r, u64 val)
> +{
> +	if (!vcpu_mode_is_32bit(vcpu))
> +		vcpu_sys_reg(vcpu, r->reg) = val;
> +	else
> +		vcpu_cp15(vcpu, r->reg) = lower_32_bits(val);
> +}
> +
> +static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> +{
> +	u64 pmcr, val;
> +
> +	asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr));
> +	/* Writable bits of PMCR_EL0 (ARMV8_PMCR_MASK) is reset to UNKNOWN*/
> +	val = (pmcr & ~ARMV8_PMCR_MASK) | (ARMV8_PMCR_MASK & 0xdecafbad);

Two comments:
(1) In Patch 1, ARMV8_PMCR_MASK is defined as 0x3f. According to ARMv8
spec, PMCR_EL0.LC (bit 6) is also writable. Should ARMV8_PMCR_MASK be 0x7f?
(2) According to spec the PMCR_EL0.E bit reset to 0, not UNKNOWN.


> +	vcpu_sysreg_write(vcpu, r, val);
> +}
> +
> +/* PMU registers accessor. */
> +static bool access_pmu_regs(struct kvm_vcpu *vcpu,
> +			    const struct sys_reg_params *p,
> +			    const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case PMCR_EL0: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_sys_reg(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_sys_reg(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_sys_reg(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
>  #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
>  	/* DBGBVRn_EL1 */						\
> @@ -637,7 +685,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  
>  	/* PMCR_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
> -	  trap_raz_wi },
> +	  access_pmu_regs, reset_pmcr, PMCR_EL0, },
>  	/* PMCNTENSET_EL0 */
>  	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
>  	  trap_raz_wi },
> @@ -871,6 +919,34 @@ static const struct sys_reg_desc cp14_64_regs[] = {
>  	{ Op1( 0), CRm( 2), .access = trap_raz_wi },
>  };
>  
> +/* PMU CP15 registers accessor. */
> +static bool access_pmu_cp15_regs(struct kvm_vcpu *vcpu,
> +				 const struct sys_reg_params *p,
> +				 const struct sys_reg_desc *r)
> +{
> +	unsigned long val;
> +
> +	if (p->is_write) {
> +		switch (r->reg) {
> +		case c9_PMCR: {
> +			/* Only update writeable bits of PMCR */
> +			val = vcpu_cp15(vcpu, r->reg);
> +			val &= ~ARMV8_PMCR_MASK;
> +			val |= *vcpu_reg(vcpu, p->Rt) & ARMV8_PMCR_MASK;
> +			vcpu_cp15(vcpu, r->reg) = val;
> +			break;
> +		}
> +		default:
> +			vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
> +			break;
> +		}
> +	} else {
> +		*vcpu_reg(vcpu, p->Rt) = vcpu_cp15(vcpu, r->reg);
> +	}
> +
> +	return true;
> +}
> +
>  /*
>   * Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
>   * depending on the way they are accessed (as a 32bit or a 64bit
> @@ -899,7 +975,8 @@ static const struct sys_reg_desc cp15_regs[] = {
>  	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
>  
>  	/* PMU */
> -	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
> +	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmu_cp15_regs,
> +	  reset_pmcr, c9_PMCR },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
>  	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
> 

  reply	other threads:[~2015-10-16  5:35 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-24 22:31 [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-09-24 22:31 ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 01/20] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 02/20] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 03/20] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-07  8:25   ` Marc Zyngier
2015-10-07  8:25     ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 04/20] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16  5:35   ` Wei Huang [this message]
2015-10-16  5:35     ` Wei Huang
2015-10-21  6:27     ` Shannon Zhao
2015-10-21  6:27       ` Shannon Zhao
2015-10-21  6:27       ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 05/20] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 06/20] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 07/20] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16  6:08   ` Wei Huang
2015-10-16  6:08     ` Wei Huang
2015-10-21  6:32     ` Shannon Zhao
2015-10-21  6:32       ` Shannon Zhao
2015-10-21  6:32       ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 08/20] KVM: ARM64: Add reset and access handlers for PMXEVTYPER register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 09/20] KVM: ARM64: Add reset and access handlers for PMXEVCNTR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 10/20] KVM: ARM64: Add reset and access handlers for PMCCNTR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16 15:06   ` Wei Huang
2015-10-16 15:06     ` Wei Huang
2015-10-21  6:48     ` Shannon Zhao
2015-10-21  6:48       ` Shannon Zhao
2015-10-21  6:48       ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 11/20] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 12/20] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 13/20] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 14/20] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 15/20] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16 15:25   ` Wei Huang
2015-10-16 15:25     ` Wei Huang
2015-10-21  7:02     ` Shannon Zhao
2015-10-21  7:02       ` Shannon Zhao
2015-10-21  7:02       ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 16/20] KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 17/20] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-07  8:17   ` Marc Zyngier
2015-10-07  8:17     ` Marc Zyngier
2015-09-24 22:31 ` [PATCH v3 18/20] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16 15:28   ` Wei Huang
2015-10-16 15:28     ` Wei Huang
2015-09-24 22:31 ` [PATCH v3 19/20] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-09-24 22:31 ` [PATCH v3 20/20] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-09-24 22:31   ` Shannon Zhao
2015-10-16  4:55 ` [PATCH v3 00/20] KVM: ARM64: Add guest PMU support Wei Huang
2015-10-16  4:55   ` Wei Huang
2015-10-16 17:01   ` Christopher Covington
2015-10-16 17:01     ` Christopher Covington
2015-10-21  7:26     ` Shannon Zhao
2015-10-21  7:26       ` Shannon Zhao
2015-10-21  7:26       ` Shannon Zhao
2015-10-26 11:33 ` Christoffer Dall
2015-10-26 11:33   ` Christoffer Dall
2015-10-27  1:15   ` Shannon Zhao
2015-10-27  1:15     ` Shannon Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56208CB6.1050508@redhat.com \
    --to=wei@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=shannon.zhao@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.