* OE Booth during fosdem
@ 2007-02-09 20:06 gerwin van der kruis
2007-02-14 12:11 ` Marcin Juszkiewicz
0 siblings, 1 reply; 17+ messages in thread
From: gerwin van der kruis @ 2007-02-09 20:06 UTC (permalink / raw)
To: openembedded-devel
Hi All,
After a discussion on irc , it was decided that I will take the wheel
for the booth on fosdem.
What would you like to see at the oe booth ?
Which merchandise would you buy and how much do would you spent on it ?
If you work at a company that has presentation materials like
presentation wall or something that is easy to bring and that has not
the company name all over let me know
Do you know any sponsors who can sponsor t-shirts or our flyers ?
Would you like to man our booth and at which time or date are you
available ?
Is it a good idea to make a hardware donation box where companies donate
hardware that we port to openembedded ?
Kind Regards,
Gerwin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-09 20:06 OE Booth during fosdem gerwin van der kruis
@ 2007-02-14 12:11 ` Marcin Juszkiewicz
2007-02-14 14:12 ` Michael 'Mickey' Lauer
2007-02-14 21:40 ` Philippe De Swert
0 siblings, 2 replies; 17+ messages in thread
From: Marcin Juszkiewicz @ 2007-02-14 12:11 UTC (permalink / raw)
To: gerwin van der kruis; +Cc: openembedded-devel
Dnia piątek, 9 lutego 2007, gerwin van der kruis napisał:
> After a discussion on irc , it was decided that I will take the wheel
> for the booth on fosdem.
> Would you like to man our booth and at which time or date are you
> available ?
I will be at booth. My current fosdem plans:
Saturday:
16:00 - Embedded: Analysing Embedded Memory Use
17:00 - Embedded: OpenMoko
Sunday:
10:00 - OpenSUSE: Suspend to disk and to RAM
11:00 - OpenSUSE: OpenSync
12:00 - Embedded: Open Source Embedded Development with Qtopia
13:00 - GPG/PGP Key Signing session.
Other then then I will be free and plan to be at booth.
> Is it a good idea to make a hardware donation box where companies
> donate hardware that we port to openembedded ?
idea like idea - we need to consider how to server such requests
--
JID: hrw-jabber.org
OpenEmbedded developer/consultant
Shell to DOS... Come in DOS, do you copy? Shell to DOS...
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 12:11 ` Marcin Juszkiewicz
@ 2007-02-14 14:12 ` Michael 'Mickey' Lauer
2007-02-14 16:57 ` Tim Bird
2007-02-14 21:40 ` Philippe De Swert
1 sibling, 1 reply; 17+ messages in thread
From: Michael 'Mickey' Lauer @ 2007-02-14 14:12 UTC (permalink / raw)
To: Marcin Juszkiewicz; +Cc: openembedded-devel
Could anyone skilled in Wiki markup add a table for the booth
attendance? Something like
---------Saturday|Sunday|
- 10-12
- 12-14
- 14-16
- 16-18
and then we can insert on which slots we can stand. We should aim
for 2, better 3 persons at any time.
Thanks,
:M:
--
Michael 'Mickey' Lauer | IT-Freelancer | http://www.vanille-media.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 14:12 ` Michael 'Mickey' Lauer
@ 2007-02-14 16:57 ` Tim Bird
2007-02-14 17:13 ` Michael 'Mickey' Lauer
0 siblings, 1 reply; 17+ messages in thread
From: Tim Bird @ 2007-02-14 16:57 UTC (permalink / raw)
To: openembedded-devel
Michael 'Mickey' Lauer wrote:
> Could anyone skilled in Wiki markup add a table for the booth
> attendance? Something like
>
> ---------Saturday|Sunday|
> - 10-12
> - 12-14
> - 14-16
> - 16-18
>
> and then we can insert on which slots we can stand. We should aim
> for 2, better 3 persons at any time.
What page do you want this on?
-- Tim
=============================
Tim Bird
Architecture Group Chair, CE Linux Forum
Senior Staff Engineer, Sony Electronics
=============================
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 16:57 ` Tim Bird
@ 2007-02-14 17:13 ` Michael 'Mickey' Lauer
2007-02-14 18:32 ` Tim Bird
0 siblings, 1 reply; 17+ messages in thread
From: Michael 'Mickey' Lauer @ 2007-02-14 17:13 UTC (permalink / raw)
To: Tim Bird; +Cc: openembedded-devel
Tim Bird wrote:
> Michael 'Mickey' Lauer wrote:
>> Could anyone skilled in Wiki markup add a table for the booth
>> attendance? Something like
>>
>> ---------Saturday|Sunday|
>> - 10-12
>> - 12-14
>> - 14-16
>> - 16-18
>>
>> and then we can insert on which slots we can stand. We should aim
>> for 2, better 3 persons at any time.
> What page do you want this on?
http://www.openembedded.org/fosdem2007 would be it.
Thanks a lot!
Mickey.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 17:13 ` Michael 'Mickey' Lauer
@ 2007-02-14 18:32 ` Tim Bird
2007-02-16 22:10 ` Rolf Leggewie
0 siblings, 1 reply; 17+ messages in thread
From: Tim Bird @ 2007-02-14 18:32 UTC (permalink / raw)
To: Michael Lauer; +Cc: openembedded-devel
Michael 'Mickey' Lauer wrote:
> Tim Bird wrote:
>> Michael 'Mickey' Lauer wrote:
>>> Could anyone skilled in Wiki markup add a table for the booth
>>> attendance?
> http://www.openembedded.org/fosdem2007 would be it.
It took me a while to figure out which wiki syntax to use,
but a first pass of it is on the page now. It should
be obvious how to add names to the table when editing the
page.
Regards,
-- Tim
=============================
Tim Bird
Architecture Group Chair, CE Linux Forum
Senior Staff Engineer, Sony Electronics
=============================
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 12:11 ` Marcin Juszkiewicz
2007-02-14 14:12 ` Michael 'Mickey' Lauer
@ 2007-02-14 21:40 ` Philippe De Swert
2007-02-14 21:51 ` gerwin van der kruis
1 sibling, 1 reply; 17+ messages in thread
From: Philippe De Swert @ 2007-02-14 21:40 UTC (permalink / raw)
To: openembedded-devel
Hi,
On Wed, 2007-02-14 at 13:11 +0100, Marcin Juszkiewicz wrote:
> > Is it a good idea to make a hardware donation box where companies
> > donate hardware that we port to openembedded ?
>
> idea like idea - we need to consider how to server such requests
Do think of promoting this beforehand. I don't think there will be many
people going: "Oh I have this ${DEVICE} in my bag somewhere with all
cables and power supply. Please have it." People usually don't carry
surplus HW with them. A little money donation box might be a good idea
as well. It is easier to organize and people usually carry money to
FOSDEM (you just need to convince them to give it to you instead of
O'Reilly :-)
Cheers,
Philippe
PS: /me hopes to have some time to drop by and say hello
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 21:40 ` Philippe De Swert
@ 2007-02-14 21:51 ` gerwin van der kruis
2007-02-14 22:22 ` Tim Bird
0 siblings, 1 reply; 17+ messages in thread
From: gerwin van der kruis @ 2007-02-14 21:51 UTC (permalink / raw)
To: openembedded-devel
Op woensdag 14-02-2007 om 23:40 uur [tijdzone +0200], schreef Philippe
De Swert:
> Hi,
>
> On Wed, 2007-02-14 at 13:11 +0100, Marcin Juszkiewicz wrote:
>
> > > Is it a good idea to make a hardware donation box where companies
> > > donate hardware that we port to openembedded ?
> >
> > idea like idea - we need to consider how to server such requests
>
> Do think of promoting this beforehand. I don't think there will be many
> people going: "Oh I have this ${DEVICE} in my bag somewhere with all
> cables and power supply. Please have it." People usually don't carry
> surplus HW with them. A little money donation box might be a good idea
> as well. It is easier to organize and people usually carry money to
> FOSDEM (you just need to convince them to give it to you instead of
> O'Reilly :-)
>
Maybe an idea to promote it on linuxdevices.com ?
Do we have a fund where we can store the funds we get ?
I was thinking to set up like a hardware distribution list
Regards,
Gerwin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 21:51 ` gerwin van der kruis
@ 2007-02-14 22:22 ` Tim Bird
2007-02-14 22:31 ` Jim Thompson
2007-02-14 23:46 ` gerwin van der kruis
0 siblings, 2 replies; 17+ messages in thread
From: Tim Bird @ 2007-02-14 22:22 UTC (permalink / raw)
To: openembedded-devel
gerwin van der kruis wrote:
>>>> Is it a good idea to make a hardware donation box where companies
>>>> donate hardware that we port to openembedded ?
>>> idea like idea - we need to consider how to server such requests
>> Do think of promoting this beforehand. I don't think there will be many
>> people going: "Oh I have this ${DEVICE} in my bag somewhere with all
>> cables and power supply. Please have it." People usually don't carry
>> surplus HW with them. A little money donation box might be a good idea
>> as well. It is easier to organize and people usually carry money to
>> FOSDEM (you just need to convince them to give it to you instead of
>> O'Reilly :-)
>>
> Maybe an idea to promote it on linuxdevices.com ?
>
> Do we have a fund where we can store the funds we get ?
>
> I was thinking to set up like a hardware distribution list
FYI - I'm not offering anything specific at the moment,
but CELF has a fund for making hardware donations for
interesting OSS projects. If there's some piece of hardware
that someone thinks would really advance the goals of
the OE project, please let me know, and I can have CELF
consider donating it.
-- Tim
=============================
Tim Bird
Architecture Group Chair, CE Linux Forum
Senior Staff Engineer, Sony Electronics
=============================
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 22:22 ` Tim Bird
@ 2007-02-14 22:31 ` Jim Thompson
2007-02-14 22:37 ` Koen Kooi
2007-02-14 23:46 ` gerwin van der kruis
1 sibling, 1 reply; 17+ messages in thread
From: Jim Thompson @ 2007-02-14 22:31 UTC (permalink / raw)
To: openembedded-devel
On Feb 14, 2007, at 12:22 PM, Tim Bird wrote:
> gerwin van der kruis wrote:
>>>>> Is it a good idea to make a hardware donation box where companies
>>>>> donate hardware that we port to openembedded ?
>>>> idea like idea - we need to consider how to server such requests
>>> Do think of promoting this beforehand. I don't think there will
>>> be many
>>> people going: "Oh I have this ${DEVICE} in my bag somewhere with all
>>> cables and power supply. Please have it." People usually don't carry
>>> surplus HW with them. A little money donation box might be a good
>>> idea
>>> as well. It is easier to organize and people usually carry money to
>>> FOSDEM (you just need to convince them to give it to you instead of
>>> O'Reilly :-)
>>>
>> Maybe an idea to promote it on linuxdevices.com ?
>>
>> Do we have a fund where we can store the funds we get ?
>>
>> I was thinking to set up like a hardware distribution list
>
> FYI - I'm not offering anything specific at the moment,
> but CELF has a fund for making hardware donations for
> interesting OSS projects. If there's some piece of hardware
> that someone thinks would really advance the goals of
> the OE project, please let me know, and I can have CELF
> consider donating it.
Ya know, I'd consider donating hardware (see www.netgate.com for what
we have) and/or cash if someone would put up a
"build the bootable ISO so you can boot-n-install an OE image on a
HD on ye-olde-random PeeCee" set of patches, or even a recipe for same
Or, equivalently, an image (complete with boot sector) that one could
DD onto a CF card or actual IDE drive that would boot a given root
image on ye-olde-PeeCee.
OpenEmbedded would go a lot faster if people could experiment on
garden-variety PCs rather than go through the "fun" of getting it up-
n-running on more esoteric hardware.
Jim
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 22:31 ` Jim Thompson
@ 2007-02-14 22:37 ` Koen Kooi
2007-02-14 22:53 ` Jim Thompson
0 siblings, 1 reply; 17+ messages in thread
From: Koen Kooi @ 2007-02-14 22:37 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Jim Thompson schreef:
> On Feb 14, 2007, at 12:22 PM, Tim Bird wrote:
>
>> gerwin van der kruis wrote:
>>>>>> Is it a good idea to make a hardware donation box where companies
>>>>>> donate hardware that we port to openembedded ?
>>>>> idea like idea - we need to consider how to server such requests
>>>> Do think of promoting this beforehand. I don't think there will
>>>> be many
>>>> people going: "Oh I have this ${DEVICE} in my bag somewhere with all
>>>> cables and power supply. Please have it." People usually don't carry
>>>> surplus HW with them. A little money donation box might be a good
>>>> idea
>>>> as well. It is easier to organize and people usually carry money to
>>>> FOSDEM (you just need to convince them to give it to you instead of
>>>> O'Reilly :-)
>>>>
>>> Maybe an idea to promote it on linuxdevices.com ?
>>>
>>> Do we have a fund where we can store the funds we get ?
>>>
>>> I was thinking to set up like a hardware distribution list
>> FYI - I'm not offering anything specific at the moment,
>> but CELF has a fund for making hardware donations for
>> interesting OSS projects. If there's some piece of hardware
>> that someone thinks would really advance the goals of
>> the OE project, please let me know, and I can have CELF
>> consider donating it.
>
> Ya know, I'd consider donating hardware (see www.netgate.com for what
> we have) and/or cash if someone would put up a
> "build the bootable ISO so you can boot-n-install an OE image on a
> HD on ye-olde-random PeeCee" set of patches, or even a recipe for same
>
> Or, equivalently, an image (complete with boot sector) that one could
> DD onto a CF card or actual IDE drive that would boot a given root
> image on ye-olde-PeeCee.
>
> OpenEmbedded would go a lot faster if people could experiment on
> garden-variety PCs rather than go through the "fun" of getting it up-
> n-running on more esoteric hardware.
Marcin, Jamie, Phil, Gerwin and I are using OE to build for vairous x86 machines
(MACHINE={guinness,epia,x86). For some graphic pleasure:
http://dominion.kabel.utwente.nl/koen/cms/madness
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFF048sMkyGM64RGpERApEnAJ9QwECkBsyqvVnEVOjIsOyOILzOKACeJ2/d
9XVCEnRaOqvOSfCUMHHhC1s=
=A1VM
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 22:37 ` Koen Kooi
@ 2007-02-14 22:53 ` Jim Thompson
2007-02-14 23:17 ` gerwin van der kruis
[not found] ` <45D3FFBA.10504@dominion.kabel.utwente.nl>
0 siblings, 2 replies; 17+ messages in thread
From: Jim Thompson @ 2007-02-14 22:53 UTC (permalink / raw)
To: openembedded-devel; +Cc: openembedded-devel
On Feb 14, 2007, at 12:37 PM, Koen Kooi wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Jim Thompson schreef:
>> Ya know, I'd consider donating hardware (see www.netgate.com for what
>> we have) and/or cash if someone would put up a
>> "build the bootable ISO so you can boot-n-install an OE image on a
>> HD on ye-olde-random PeeCee" set of patches, or even a recipe for
>> same
>>
>> Or, equivalently, an image (complete with boot sector) that one could
>> DD onto a CF card or actual IDE drive that would boot a given root
>> image on ye-olde-PeeCee.
>>
>> OpenEmbedded would go a lot faster if people could experiment on
>> garden-variety PCs rather than go through the "fun" of getting it up-
>> n-running on more esoteric hardware.
>
> Marcin, Jamie, Phil, Gerwin and I are using OE to build for vairous
> x86 machines
> (MACHINE={guinness,epia,x86). For some graphic pleasure:
> http://dominion.kabel.utwente.nl/koen/cms/madness
I know about the guinness and wrap MACHINEs.
What I'm looking for is a short-cut to getting a distro *onto* the disk.
Yes, I'm sure most people could "figure it out" with some time and
effort, but what I want is to make it easier.
If OE would build an x86 disk image that could be 'dd'-ed to a CF
card, then building OE images for Soekris or WRAP boards would be EZ.
If OE would build an x86 disk image that could be 'dd'-ed to an IDE
drive (likely the same as above), then building OE images for
"ordinary PCs" would be trivial.
If OE would build a bootable ISO image that could partition and label
an attached IDE drive, then install the image *onto* that drive, ....
well, I could see all *sorts* of uses for that.
And I'm willing to throw cash, hardware and time at this.
Yes, we sell WRAP boards, but I'm not looking to get a bunch-o-free
development out of the process. (We sell a Gateworks ixp42x board
too, just to be perfectly honest.)
Years ago, I ran (and owned) 'musenki' (google for it or look here:
http://he-colo.netgate.com/~jim/Musenki/. We had build a set of
Motorola 8245/8241 boards, and I'd made linux run on them. I
remember spending a horrific amount of time with a (very) early
version of "buildroot". OE is so much more sophisticated that I'm a
bit taken aback.
The OE learning curve is still quite steep, but I think it would be
less steep with a) a bit more documentation and b) an EZ way to start
creating "little distros" that
run on PCs using it.
Jim
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 22:53 ` Jim Thompson
@ 2007-02-14 23:17 ` gerwin van der kruis
2007-02-15 1:02 ` Jim Thompson
[not found] ` <45D3FFBA.10504@dominion.kabel.utwente.nl>
1 sibling, 1 reply; 17+ messages in thread
From: gerwin van der kruis @ 2007-02-14 23:17 UTC (permalink / raw)
To: openembedded-devel
Op woensdag 14-02-2007 om 12:53 uur [tijdzone -1000], schreef Jim
Thompson:
> And I'm willing to throw cash, hardware and time at this.
>
> Yes, we sell WRAP boards, but I'm not looking to get a bunch-o-free
> development out of the process. (We sell a Gateworks ixp42x board
> too, just to be perfectly honest.)
>
> Years ago, I ran (and owned) 'musenki' (google for it or look here:
> http://he-colo.netgate.com/~jim/Musenki/. We had build a set of
> Motorola 8245/8241 boards, and I'd made linux run on them. I
> remember spending a horrific amount of time with a (very) early
> version of "buildroot". OE is so much more sophisticated that I'm a
> bit taken aback.
>
> The OE learning curve is still quite steep, but I think it would be
> less steep with a) a bit more documentation and b) an EZ way to start
> creating "little distros" that
> run on PCs using it.
I remember we had this discussion before , the problem is the
bootloader, for example grub requires some extra handlings to get
installed probarly.
I also experimented a bit with disk on modules which were much
faster than the compact flash and much cheaper as well.
I think if you write a script which automate the installation of for
example grub and than copies automatically the files over to cf you are
finished , I did it once long time ago for an embedded voip pabx.
As Koen said I am working on x86 projects like wifi-radio (with a
mini-itx board and some small additions) a set top box and a thin
client.So we are working on it !!
I will have a look if I still can find the software I made that time
for putting the image directly on the flash (I wrote it to produce some
goods)
Regards,
Gerwin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 22:22 ` Tim Bird
2007-02-14 22:31 ` Jim Thompson
@ 2007-02-14 23:46 ` gerwin van der kruis
1 sibling, 0 replies; 17+ messages in thread
From: gerwin van der kruis @ 2007-02-14 23:46 UTC (permalink / raw)
To: openembedded-devel
> FYI - I'm not offering anything specific at the moment,
> but CELF has a fund for making hardware donations for
> interesting OSS projects. If there's some piece of hardware
> that someone thinks would really advance the goals of
> the OE project, please let me know, and I can have CELF
> consider donating it.
> -- Tim
>
> =============================
> Tim Bird
> Architecture Group Chair, CE Linux Forum
> Senior Staff Engineer, Sony Electronics
> =============================
Thanks for your offer !. I think it is good to be in contact.
Because being in contact with celf can enable us as well to be
in touch with a lot of supliers. Is it maybe an idea to extend
this contact ?
We also could use a lot of the input from the industry to improve oe.
Regards,
Gerwin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 23:17 ` gerwin van der kruis
@ 2007-02-15 1:02 ` Jim Thompson
0 siblings, 0 replies; 17+ messages in thread
From: Jim Thompson @ 2007-02-15 1:02 UTC (permalink / raw)
To: openembedded-devel, gerwin van der kruis
[-- Attachment #1: Type: text/plain, Size: 2305 bytes --]
On Feb 14, 2007, at 1:17 PM, gerwin van der kruis wrote:
> Op woensdag 14-02-2007 om 12:53 uur [tijdzone -1000], schreef Jim
> Thompson:
>
>> And I'm willing to throw cash, hardware and time at this.
>>
>> Yes, we sell WRAP boards, but I'm not looking to get a bunch-o-free
>> development out of the process. (We sell a Gateworks ixp42x board
>> too, just to be perfectly honest.)
>>
>> Years ago, I ran (and owned) 'musenki' (google for it or look here:
>> http://he-colo.netgate.com/~jim/Musenki/. We had build a set of
>> Motorola 8245/8241 boards, and I'd made linux run on them. I
>> remember spending a horrific amount of time with a (very) early
>> version of "buildroot". OE is so much more sophisticated that I'm a
>> bit taken aback.
>>
>> The OE learning curve is still quite steep, but I think it would be
>> less steep with a) a bit more documentation and b) an EZ way to start
>> creating "little distros" that
>> run on PCs using it.
>
> I remember we had this discussion before , the problem is the
> bootloader, for example grub requires some extra handlings to get
> installed probarly.
There appears to be a decent start on "here are the set of steps"
here: http://kbarr.net/bochs
(I've only recently discovered this.)
> I also experimented a bit with disk on modules which were much
> faster than the compact flash and much cheaper as well.
Its hard to beat $9 (what we pay for 128MB CF), but if you know of a
source, I'm all ears.
> I think if you write a script which automate the installation of for
> example grub and than copies automatically the files over to cf you
> are
> finished , I did it once long time ago for an embedded voip pabx.
I once made 'lilo' work with a buildroot-based system. The makefile
is attached.
I never could get 'grub' to do the same thing, though I prefer grub
to lilo.
> As Koen said I am working on x86 projects like wifi-radio (with a
> mini-itx board and some small additions) a set top box and a thin
> client.So we are working on it !!
Is the wifi-radio tree available anywhere?
> I will have a look if I still can find the software I made that time
> for putting the image directly on the flash (I wrote it to produce
> some
> goods)
thanks
Jim
[-- Attachment #2: cfimage.mk --]
[-- Type: application/octet-stream, Size: 4864 bytes --]
#############################################################
#
# Build the root filesystem image for/on compact flash
# with thanks to snapgear for inspiration
#
#############################################################
CFDIR=$(BUILD_DIR)/cfimage
# rebuild the ext2root image, then become root to finish up
cfimage-setup: $(IMAGE).ext2.gz
mkdir -p $(CFDIR)
@echo '********************************************************'
@echo '********************************************************'
@echo '********************************************************'
@echo '** Time to make the final compact flash image. **'
@echo '** For this you need to be "root". You will also need **'
@echo '** a kernel with the loopback device enabled and ext2 **'
@echo '** filesystem support. Enter the root password below **'
@echo '** if asked, or an invalid password to abort. **'
@echo '********************************************************'
@echo '********************************************************'
@echo '********************************************************'
@echo ''
su root -c "$(MAKE) cfimage-real" < /dev/tty > /dev/tty 2>&1
# the number of 512 byte blocks in config partition (4096 = 2Mb)
CONFIG = 4960
# Make a lilo bootable compact flash image based on paramters passed in
.PHONY: extimage
extimage: lilo
#create/zero out master boot record image
dd if=/dev/zero of=$(CFDIR)/mbr.img bs=512 count=1
#create a partition map in the image
echo -e "1,`expr $(CYLS) \\* $(HEADS) \\* $(SECTORS) - $(CONFIG) - 1`,L,*\n,,,-" | \
sfdisk -uS -C $(CYLS) -H $(HEADS) -S $(SECTORS) $(CFDIR)/mbr.img
trap "cd $(CFDIR); umount $(CFDIR)/pre.mnt; umount $(CFDIR)/post.mnt; sleep 1; \
rm -rf $(CFDIR)/pre.mnt $(CFDIR)/post.mnt" 0;
#create/zero out post.img image
dd if=/dev/zero of=$(CFDIR)/post.img bs=512 \
count=`expr $(CYLS) \\* $(HEADS) \\* $(SECTORS) - 1 - $(CONFIG)`
#make post.img an ext2 filesystem, then an ext3 filesystem
/sbin/mke2fs -F -m0 -v $(CFDIR)/post.img
/sbin/tune2fs -i 0 -j $(CFDIR)/post.img
#remove existing mounts
rm -rf $(CFDIR)/pre.mnt $(CFDIR)/post.mnt
#remake mount points
mkdir $(CFDIR)/pre.mnt $(CFDIR)/post.mnt
cp $(IMAGE).ext2.gz $(CFDIR)/
gunzip -c $(CFDIR)/$(IMAGE_NAME).ext2.gz > $(CFDIR)/pre.img
mount -t ext2 -o loop $(CFDIR)/pre.img $(CFDIR)/pre.mnt
mount -t ext2 -o loop $(CFDIR)/post.img $(CFDIR)/post.mnt
(cd $(CFDIR)/pre.mnt; tar cf - .) | (cd $(CFDIR)/post.mnt; tar xf -)
mkdir -p $(CFDIR)/post.mnt/boot
#do some setup for lilo (put kernel in image, add lilo.conf)
cp -a $(LINUX_KERNEL) $(CFDIR)/post.mnt/boot/vmlinuz
cp -a $(SOURCE_DIR)/$(SYSTEM_NAME)/lilo.conf $(CFDIR)/post.mnt/etc/lilo.conf
echo "#Device Bios Sectors Heads Cyls Start" > $(CFDIR)/disktab
echo "0x70`mount|grep post.img|sed 's?.*loop=/dev/loop\([0-9]\).*$$?\1?'` 0x80 $(SECTORS) $(HEADS) $(CYLS) 1" >> $(CFDIR)/disktab
chmod -R go-w $(CFDIR)/post.mnt
chgrp -hR root $(CFDIR)/post.mnt
chown -hR root $(CFDIR)/post.mnt
cp $(SOURCE_DIR)/$(SYSTEM_NAME)/lilo-build.conf $(CFDIR)
chown -hR root $(CFDIR)/lilo-build.conf
( cd $(CFDIR); \
$(STAGING_DIR)/bin/lilo -s /dev/null -C $(CFDIR)/lilo-build.conf -f $(CFDIR)/disktab; \
)
dd if=/dev/zero of=$(CFDIR)/conf.img bs=512 count=`expr $(CONFIG)`
/sbin/mke2fs -F -m0 -v $(CFDIR)/conf.img
/sbin/tune2fs -i 0 -j $(CFDIR)/conf.img
# rm -rf $(CFDIR)/conf.mnt
# mkdir $(CFDIR)/conf.mnt
# mount -t ext3 -o loop $(CFDIR)/conf.img $(CFDIR)/conf.mnt
# XXX stuff /conf here
rm -f $(CFDIR)/disktab
cat $(CFDIR)/mbr.img $(CFDIR)/post.img $(CFDIR)/conf.img | gzip -9 > $(IMG)
ls -l $(CFDIR)/mbr.img $(CFDIR)/post.img $(CFDIR)/conf.img $(IMG)
trap "cd $(CFDIR); umount $(CFDIR)/pre.mnt; umount $(CFDIR)/post.mnt; $(CFDIR)/conf.mnt sleep 1; \
rm -rf $(CFDIR)/pre.mnt $(CFDIR)/post.mnt $(CFDIR)/conf.mnt" 0;
#$(ROOTDIR)/tools/cksum -b -o 2 $(IMG) >> $(IMG)
#############################################################################
# make images for various sizes of compact flash, check your geometry,
# you may need to add your own here, remove any your don't want built from
# the cfimage target
extimage-64MB:
$(MAKE) extimage HEADS=2 SECTORS=62 CYLS=1009 IMG=$(IMAGE_DIR)/$(SYSTEM_NAME)-cf-64MB.img.gz
extimage-128MB:
$(MAKE) extimage HEADS=2 SECTORS=62 CYLS=2018 IMG=$(IMAGE_DIR)/$(SYSTEM_NAME)-cf-128MB.img.gz
#stuff you have to be root for :(
cfimage-real: extimage-64MB extimage-128MB
#stuff we can do while NOT root
cfimage: cfimage-setup
cfimage-clean:
#rm -f pre.img post.img lilo
rm -f $(IMAGE_DIR)/$(SYSTEM_NAME)-cf-*.img.gz
cfimage-dirclean:
rm -rf $(GENEXT2_DIR)
.PHONY: cfimage extimage-64MB extimage-128MB
#############################################################################
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
[not found] ` <45D3FFBA.10504@dominion.kabel.utwente.nl>
@ 2007-02-15 17:08 ` Michael 'Mickey' Lauer
0 siblings, 0 replies; 17+ messages in thread
From: Michael 'Mickey' Lauer @ 2007-02-15 17:08 UTC (permalink / raw)
To: openembedded-devel
Tim, thanks for the table.
I just added myself to some slots,
guys, please do the same :)
Regards,
:M:
--
Michael 'Mickey' Lauer | IT-Freelancer | http://www.vanille-media.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: OE Booth during fosdem
2007-02-14 18:32 ` Tim Bird
@ 2007-02-16 22:10 ` Rolf Leggewie
0 siblings, 0 replies; 17+ messages in thread
From: Rolf Leggewie @ 2007-02-16 22:10 UTC (permalink / raw)
To: openembedded-devel
Tim Bird wrote:
>>>> Could anyone skilled in Wiki markup add a table for the booth
>>>> attendance?
> It took me a while to figure out which wiki syntax to use,
> but a first pass of it is on the page now.
Changed it so that everything is in a single table.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2007-02-16 22:10 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-09 20:06 OE Booth during fosdem gerwin van der kruis
2007-02-14 12:11 ` Marcin Juszkiewicz
2007-02-14 14:12 ` Michael 'Mickey' Lauer
2007-02-14 16:57 ` Tim Bird
2007-02-14 17:13 ` Michael 'Mickey' Lauer
2007-02-14 18:32 ` Tim Bird
2007-02-16 22:10 ` Rolf Leggewie
2007-02-14 21:40 ` Philippe De Swert
2007-02-14 21:51 ` gerwin van der kruis
2007-02-14 22:22 ` Tim Bird
2007-02-14 22:31 ` Jim Thompson
2007-02-14 22:37 ` Koen Kooi
2007-02-14 22:53 ` Jim Thompson
2007-02-14 23:17 ` gerwin van der kruis
2007-02-15 1:02 ` Jim Thompson
[not found] ` <45D3FFBA.10504@dominion.kabel.utwente.nl>
2007-02-15 17:08 ` Michael 'Mickey' Lauer
2007-02-14 23:46 ` gerwin van der kruis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.