* [PATCH v6 01/22] eal: return device handle upon plugin
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 02/22] eal: fix hotplug add Gaetan Rivet
` (23 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_dev.c | 40 +++++++++++++++++++++++----------
lib/librte_eal/common/include/rte_dev.h | 10 +++++----
2 files changed, 34 insertions(+), 16 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_dev.c b/lib/librte_eal/common/eal_common_dev.c
index 32e12b5..292fefe 100644
--- a/lib/librte_eal/common/eal_common_dev.c
+++ b/lib/librte_eal/common/eal_common_dev.c
@@ -42,6 +42,7 @@
#include <rte_devargs.h>
#include <rte_debug.h>
#include <rte_devargs.h>
+#include <rte_errno.h>
#include <rte_log.h>
#include "eal_private.h"
@@ -67,6 +68,7 @@ static int cmp_dev_name(const struct rte_device *dev, const void *_name)
int rte_eal_dev_attach(const char *name, const char *devargs)
{
+ struct rte_device *dev;
int ret;
if (name == NULL || devargs == NULL) {
@@ -74,9 +76,9 @@ int rte_eal_dev_attach(const char *name, const char *devargs)
return -EINVAL;
}
- ret = rte_eal_hotplug_add("pci", name, devargs);
- if (ret && ret != -EINVAL)
- return ret;
+ dev = rte_eal_hotplug_add("pci", name, devargs);
+ if (dev == NULL && rte_errno != EINVAL)
+ return -rte_errno;
/*
* If we haven't found a bus device the user meant to "hotplug" a
@@ -118,7 +120,8 @@ int rte_eal_dev_detach(struct rte_device *dev)
return ret;
}
-int rte_eal_hotplug_add(const char *busname, const char *devname,
+struct rte_device *
+rte_eal_hotplug_add(const char *busname, const char *devname,
const char *devargs)
{
struct rte_bus *bus;
@@ -128,31 +131,39 @@ int rte_eal_hotplug_add(const char *busname, const char *devname,
bus = rte_bus_find_by_name(busname);
if (bus == NULL) {
RTE_LOG(ERR, EAL, "Cannot find bus (%s)\n", busname);
- return -ENOENT;
+ rte_errno = ENOENT;
+ return NULL;
}
if (bus->plug == NULL) {
RTE_LOG(ERR, EAL, "Function plug not supported by bus (%s)\n",
bus->name);
- return -ENOTSUP;
+ rte_errno = ENOTSUP;
+ return NULL;
}
ret = bus->scan();
- if (ret)
- return ret;
+ if (ret) {
+ rte_errno = -ret;
+ return NULL;
+ }
dev = bus->find_device(NULL, cmp_detached_dev_name, devname);
if (dev == NULL) {
RTE_LOG(ERR, EAL, "Cannot find unplugged device (%s)\n",
devname);
- return -EINVAL;
+ rte_errno = EINVAL;
+ return NULL;
}
ret = bus->plug(dev, devargs);
- if (ret)
+ if (ret) {
RTE_LOG(ERR, EAL, "Driver cannot attach the device (%s)\n",
dev->name);
- return ret;
+ rte_errno = -ret;
+ return NULL;
+ }
+ return dev;
}
int rte_eal_hotplug_remove(const char *busname, const char *devname)
@@ -164,24 +175,29 @@ int rte_eal_hotplug_remove(const char *busname, const char *devname)
bus = rte_bus_find_by_name(busname);
if (bus == NULL) {
RTE_LOG(ERR, EAL, "Cannot find bus (%s)\n", busname);
+ rte_errno = ENOENT;
return -ENOENT;
}
if (bus->unplug == NULL) {
RTE_LOG(ERR, EAL, "Function unplug not supported by bus (%s)\n",
bus->name);
+ rte_errno = ENOTSUP;
return -ENOTSUP;
}
dev = bus->find_device(NULL, cmp_dev_name, devname);
if (dev == NULL) {
RTE_LOG(ERR, EAL, "Cannot find plugged device (%s)\n", devname);
+ rte_errno = EINVAL;
return -EINVAL;
}
ret = bus->unplug(dev);
- if (ret)
+ if (ret) {
RTE_LOG(ERR, EAL, "Driver cannot detach the device (%s)\n",
dev->name);
+ rte_errno = -ret;
+ }
return ret;
}
diff --git a/lib/librte_eal/common/include/rte_dev.h b/lib/librte_eal/common/include/rte_dev.h
index bcd8b1e..30d1f2e 100644
--- a/lib/librte_eal/common/include/rte_dev.h
+++ b/lib/librte_eal/common/include/rte_dev.h
@@ -218,10 +218,12 @@ int rte_eal_dev_detach(struct rte_device *dev);
* @param devargs
* Device arguments to be passed to the driver.
* @return
- * 0 on success, negative on error.
+ * The pointer to the plugged rte_device on success.
+ * NULL on error. rte_errno is then set.
*/
-int rte_eal_hotplug_add(const char *busname, const char *devname,
- const char *devargs);
+struct rte_device *rte_eal_hotplug_add(const char *busname,
+ const char *devname,
+ const char *devargs);
/**
* @warning
@@ -234,7 +236,7 @@ int rte_eal_hotplug_add(const char *busname, const char *devname,
* @param devname
* The device name being removed.
* @return
- * 0 on success, negative on error.
+ * 0 on success, negative on error. rte_errno is then set.
*/
int rte_eal_hotplug_remove(const char *busname, const char *devname);
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 02/22] eal: fix hotplug add
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 01/22] eal: return device handle upon plugin Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 03/22] devargs: introduce removal function Gaetan Rivet
` (22 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
New device should be represented by an rte_devarg prior to being
plugged.
Fixes: a3ee360f4440 ("eal: add hotplug add/remove device")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_dev.c | 43 +++++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 3 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_dev.c b/lib/librte_eal/common/eal_common_dev.c
index 292fefe..708c8e9 100644
--- a/lib/librte_eal/common/eal_common_dev.c
+++ b/lib/librte_eal/common/eal_common_dev.c
@@ -120,12 +120,32 @@ int rte_eal_dev_detach(struct rte_device *dev)
return ret;
}
+static char *
+full_dev_name(const char *bus, const char *dev, const char *args)
+{
+ char *name;
+ size_t len;
+
+ len = strlen(bus) + 1 +
+ strlen(dev) + 1 +
+ strlen(args) + 1;
+ name = calloc(1, len);
+ if (name == NULL) {
+ RTE_LOG(ERR, EAL, "Could not allocate full device name\n");
+ return NULL;
+ }
+ snprintf(name, len, "%s:%s,%s", bus, dev,
+ args ? args : "");
+ return name;
+}
+
struct rte_device *
rte_eal_hotplug_add(const char *busname, const char *devname,
const char *devargs)
{
struct rte_bus *bus;
struct rte_device *dev;
+ char *name;
int ret;
bus = rte_bus_find_by_name(busname);
@@ -142,10 +162,22 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
return NULL;
}
+ name = full_dev_name(busname, devname, devargs);
+ if (name == NULL) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+
+ ret = rte_eal_devargs_add(RTE_DEVTYPE_WHITELISTED, name);
+ if (ret) {
+ rte_errno = EINVAL;
+ goto err_name;
+ }
+
ret = bus->scan();
if (ret) {
rte_errno = -ret;
- return NULL;
+ goto err_name;
}
dev = bus->find_device(NULL, cmp_detached_dev_name, devname);
@@ -153,7 +185,7 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
RTE_LOG(ERR, EAL, "Cannot find unplugged device (%s)\n",
devname);
rte_errno = EINVAL;
- return NULL;
+ goto err_name;
}
ret = bus->plug(dev, devargs);
@@ -161,9 +193,14 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
RTE_LOG(ERR, EAL, "Driver cannot attach the device (%s)\n",
dev->name);
rte_errno = -ret;
- return NULL;
+ goto err_name;
}
+ free(name);
return dev;
+
+err_name:
+ free(name);
+ return NULL;
}
int rte_eal_hotplug_remove(const char *busname, const char *devname)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 03/22] devargs: introduce removal function
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 01/22] eal: return device handle upon plugin Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 02/22] eal: fix hotplug add Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 04/22] eal: release devargs on device removal Gaetan Rivet
` (21 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Hotplug support introduces the possibility of removing devices from the
system. Allocated resources must be freed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/bsdapp/eal/rte_eal_version.map | 1 +
lib/librte_eal/common/eal_common_devargs.c | 18 ++++++++++++++++++
lib/librte_eal/common/include/rte_devargs.h | 18 ++++++++++++++++++
lib/librte_eal/linuxapp/eal/rte_eal_version.map | 1 +
4 files changed, 38 insertions(+)
diff --git a/lib/librte_eal/bsdapp/eal/rte_eal_version.map b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
index 381f895..d3cf1ae 100644
--- a/lib/librte_eal/bsdapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
@@ -207,6 +207,7 @@ EXPERIMENTAL {
global:
rte_eal_devargs_parse;
+ rte_eal_devargs_rmv;
rte_eal_hotplug_add;
rte_eal_hotplug_remove;
diff --git a/lib/librte_eal/common/eal_common_devargs.c b/lib/librte_eal/common/eal_common_devargs.c
index 3ea070d..2f29e89 100644
--- a/lib/librte_eal/common/eal_common_devargs.c
+++ b/lib/librte_eal/common/eal_common_devargs.c
@@ -41,6 +41,7 @@
#include <string.h>
#include <rte_devargs.h>
+#include <rte_tailq.h>
#include "eal_private.h"
/** Global list of user devices */
@@ -185,6 +186,23 @@ rte_eal_devargs_add(enum rte_devtype devtype, const char *devargs_str)
return -1;
}
+int
+rte_eal_devargs_rmv(const char *busname, const char *devname)
+{
+ struct rte_devargs *d;
+ void *tmp;
+
+ TAILQ_FOREACH_SAFE(d, &devargs_list, next, tmp) {
+ if (strcmp(d->bus->name, busname) == 0 &&
+ strcmp(d->name, devname) == 0) {
+ TAILQ_REMOVE(&devargs_list, d, next);
+ free(d->args);
+ free(d);
+ }
+ }
+ return 1;
+}
+
/* count the number of devices of a specified type */
unsigned int
rte_eal_devargs_type_count(enum rte_devtype devtype)
diff --git a/lib/librte_eal/common/include/rte_devargs.h b/lib/librte_eal/common/include/rte_devargs.h
index a0427cd..89679bb 100644
--- a/lib/librte_eal/common/include/rte_devargs.h
+++ b/lib/librte_eal/common/include/rte_devargs.h
@@ -163,6 +163,24 @@ rte_eal_devargs_parse(const char *dev,
int rte_eal_devargs_add(enum rte_devtype devtype, const char *devargs_str);
/**
+ * Remove a device from the user device list.
+ * Its resources are freed.
+ * If the devargs cannot be found, nothing happens.
+ *
+ * @param busname
+ * bus name of the devargs to remove.
+ *
+ * @param devname
+ * device name of the devargs to remove.
+ *
+ * @return
+ * 0 on success.
+ * <0 on error.
+ * >0 if the devargs was not within the user device list.
+ */
+int rte_eal_devargs_rmv(const char *busname, const char *devname);
+
+/**
* Count the number of user devices of a specified type
*
* @param devtype
diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
index 0f9e009..d59308a 100644
--- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
@@ -212,6 +212,7 @@ EXPERIMENTAL {
global:
rte_eal_devargs_parse;
+ rte_eal_devargs_rmv;
rte_eal_hotplug_add;
rte_eal_hotplug_remove;
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 04/22] eal: release devargs on device removal
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (2 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 03/22] devargs: introduce removal function Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 05/22] pci: use given name as generic name Gaetan Rivet
` (20 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Release resources allocated for devargs when the device is being
removed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_dev.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_dev.c b/lib/librte_eal/common/eal_common_dev.c
index 708c8e9..143c231 100644
--- a/lib/librte_eal/common/eal_common_dev.c
+++ b/lib/librte_eal/common/eal_common_dev.c
@@ -177,7 +177,7 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
ret = bus->scan();
if (ret) {
rte_errno = -ret;
- goto err_name;
+ goto err_devarg;
}
dev = bus->find_device(NULL, cmp_detached_dev_name, devname);
@@ -185,7 +185,7 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
RTE_LOG(ERR, EAL, "Cannot find unplugged device (%s)\n",
devname);
rte_errno = EINVAL;
- goto err_name;
+ goto err_devarg;
}
ret = bus->plug(dev, devargs);
@@ -193,11 +193,13 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
RTE_LOG(ERR, EAL, "Driver cannot attach the device (%s)\n",
dev->name);
rte_errno = -ret;
- goto err_name;
+ goto err_devarg;
}
free(name);
return dev;
+err_devarg:
+ rte_eal_devargs_rmv(busname, devname);
err_name:
free(name);
return NULL;
@@ -230,6 +232,8 @@ int rte_eal_hotplug_remove(const char *busname, const char *devname)
return -EINVAL;
}
+ rte_eal_devargs_rmv(busname, devname);
+ dev->devargs = NULL;
ret = bus->unplug(dev);
if (ret) {
RTE_LOG(ERR, EAL, "Driver cannot detach the device (%s)\n",
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 05/22] pci: use given name as generic name
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (3 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 04/22] eal: release devargs on device removal Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 06/22] pci: fix generic driver pointer on probe error Gaetan Rivet
` (19 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet, stable
The PCI device is referenced by other DPDK systems by the name of its
parameter, not by the system name.
Fixes: beec692c5157 ("eal: add name field to generic device")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 4 ++--
lib/librte_eal/common/eal_common_pci.c | 21 ++++++++++++++++-----
lib/librte_eal/common/eal_private.h | 5 +++++
lib/librte_eal/linuxapp/eal/eal_pci.c | 4 ++--
4 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index e321461..97a88ec 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -282,8 +282,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
/* FreeBSD has no NUMA support (yet) */
dev->device.numa_node = 0;
- rte_pci_device_name(&dev->addr, dev->name, sizeof(dev->name));
- dev->device.name = dev->name;
+ pci_name_set(dev);
/* FreeBSD has only one pass through driver */
dev->kdrv = RTE_KDRV_NIC_UIO;
@@ -334,6 +333,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
} else { /* already registered */
dev2->kdrv = dev->kdrv;
dev2->max_vfs = dev->max_vfs;
+ pci_name_set(dev2);
memmove(dev2->mem_resource,
dev->mem_resource,
sizeof(dev->mem_resource));
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index e03a407..ab01749 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -88,6 +88,21 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
return NULL;
}
+void
+pci_name_set(struct rte_pci_device *dev)
+{
+ struct rte_devargs *devargs;
+
+ rte_pci_device_name(&dev->addr,
+ dev->name, sizeof(dev->name));
+ devargs = pci_devargs_lookup(dev);
+ dev->device.devargs = devargs;
+ if (devargs != NULL)
+ dev->device.name = dev->device.devargs->name;
+ else
+ dev->device.name = dev->name;
+}
+
/* map a particular resource from a file */
void *
pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size,
@@ -396,11 +411,7 @@ rte_pci_probe(void)
FOREACH_DEVICE_ON_PCIBUS(dev) {
probed++;
- /* set devargs in PCI structure */
- devargs = pci_devargs_lookup(dev);
- if (devargs != NULL)
- dev->device.devargs = devargs;
-
+ devargs = dev->device.devargs;
/* probe all or only whitelisted devices */
if (probe_all)
ret = pci_probe_all_drivers(dev);
diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h
index 0836339..597d82e 100644
--- a/lib/librte_eal/common/eal_private.h
+++ b/lib/librte_eal/common/eal_private.h
@@ -113,6 +113,11 @@ struct rte_pci_driver;
struct rte_pci_device;
/**
+ * Find the name of a PCI device.
+ */
+void pci_name_set(struct rte_pci_device *dev);
+
+/**
* Add a PCI device to the PCI Bus (append to PCI Device list). This function
* also updates the bus references of the PCI Device (and the generic device
* object embedded within.
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 7d9e1a9..556ae2c 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -324,8 +324,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
dev->device.numa_node = 0;
}
- rte_pci_device_name(addr, dev->name, sizeof(dev->name));
- dev->device.name = dev->name;
+ pci_name_set(dev);
/* parse resources */
snprintf(filename, sizeof(filename), "%s/resource", dirname);
@@ -373,6 +372,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
} else { /* already registered */
dev2->kdrv = dev->kdrv;
dev2->max_vfs = dev->max_vfs;
+ pci_name_set(dev2);
memmove(dev2->mem_resource, dev->mem_resource,
sizeof(dev->mem_resource));
free(dev);
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 06/22] pci: fix generic driver pointer on probe error
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (4 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 05/22] pci: use given name as generic name Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 07/22] pci: fix hotplug operations Gaetan Rivet
` (18 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet, stable
The field is set but never resetted on error.
Fixes: 7917d5f5ea46 ("pci: initialize generic driver pointer")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index ab01749..fbdc356 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -237,6 +237,7 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
ret = dr->probe(dr, dev);
if (ret) {
dev->driver = NULL;
+ dev->device.driver = NULL;
if ((dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) &&
/* Don't unmap if device is unsupported and
* driver needs mapped resources.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 07/22] pci: fix hotplug operations
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (5 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 06/22] pci: fix generic driver pointer on probe error Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 08/22] vdev: add dev to vdev macro Gaetan Rivet
` (17 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
The device handle is already known and does not have to be infered from
the PCI address.
Additionally, rte_memcpy.h was erroneously included.
Fixes: 00e62aae69c0 ("bus/pci: implement plug/unplug operations")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_pci.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index fbdc356..a9a04db 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -47,7 +47,6 @@
#include <rte_pci.h>
#include <rte_per_lcore.h>
#include <rte_memory.h>
-#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_string_fns.h>
@@ -538,32 +537,20 @@ pci_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
static int
pci_plug(struct rte_device *dev, const char *devargs __rte_unused)
{
- struct rte_pci_device *pdev;
- struct rte_pci_addr *addr;
-
- addr = &RTE_DEV_TO_PCI(dev)->addr;
-
- /* Find the current device holding this address in the bus. */
- FOREACH_DEVICE_ON_PCIBUS(pdev) {
- if (rte_eal_compare_pci_addr(&pdev->addr, addr) == 0)
- return rte_pci_probe_one(addr);
- }
-
- rte_errno = ENODEV;
- return -1;
+ return pci_probe_all_drivers(RTE_DEV_TO_PCI(dev));
}
static int
pci_unplug(struct rte_device *dev)
{
struct rte_pci_device *pdev;
+ int ret;
pdev = RTE_DEV_TO_PCI(dev);
- if (rte_pci_detach(&pdev->addr) != 0) {
- rte_errno = ENODEV;
- return -1;
- }
- return 0;
+ ret = rte_pci_detach_dev(pdev);
+ rte_pci_remove_device(pdev);
+ free(pdev);
+ return ret;
}
struct rte_pci_bus rte_pci_bus = {
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 08/22] vdev: add dev to vdev macro
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (6 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 07/22] pci: fix hotplug operations Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 09/22] vdev: implement plug operation Gaetan Rivet
` (16 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/include/rte_vdev.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/lib/librte_eal/common/include/rte_vdev.h b/lib/librte_eal/common/include/rte_vdev.h
index 3c07b76..639e6d6 100644
--- a/lib/librte_eal/common/include/rte_vdev.h
+++ b/lib/librte_eal/common/include/rte_vdev.h
@@ -46,6 +46,13 @@ struct rte_vdev_device {
struct rte_device device; /**< Inherit core device */
};
+/**
+ * @internal
+ * Helper macro for drivers that need to convert to struct rte_vdev_device.
+ */
+#define RTE_DEV_TO_VDEV(ptr) \
+ container_of(ptr, struct rte_vdev_device, device)
+
static inline const char *
rte_vdev_device_name(const struct rte_vdev_device *dev)
{
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 09/22] vdev: implement plug operation
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (7 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 08/22] vdev: add dev to vdev macro Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 10/22] bus: remove useless plug parameter Gaetan Rivet
` (15 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_vdev.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_vdev.c b/lib/librte_eal/common/eal_common_vdev.c
index 517a9f3..5f1c224 100644
--- a/lib/librte_eal/common/eal_common_vdev.c
+++ b/lib/librte_eal/common/eal_common_vdev.c
@@ -356,12 +356,14 @@ vdev_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
}
static int
+vdev_plug(struct rte_device *dev, const char *args __rte_unused)
+{
+ return vdev_probe_all_drivers(RTE_DEV_TO_VDEV(dev));
+}
+
+static int
vdev_unplug(struct rte_device *dev)
{
- /*
- * The virtual bus doesn't support 'unattached' devices so this is
- * actually equal to hotplugging removal of it.
- */
return rte_vdev_uninit(dev->name);
}
@@ -369,7 +371,7 @@ static struct rte_bus rte_vdev_bus = {
.scan = vdev_scan,
.probe = vdev_probe,
.find_device = vdev_find_device,
- /* .plug = NULL, see comment on vdev_unplug */
+ .plug = vdev_plug,
.unplug = vdev_unplug,
.parse = vdev_parse,
};
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 10/22] bus: remove useless plug parameter
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (8 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 09/22] vdev: implement plug operation Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 11/22] ethdev: save VLAN filter setting Gaetan Rivet
` (14 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
The prior scan should link the relevant rte_devargs to the newly
allocated rte_device. As such, it is useless to pass device arguments to
the plug callback.
Fixes: 7c8810f43f6e ("bus: introduce device plug/unplug")
Fixes: 00e62aae69c0 ("bus/pci: implement plug/unplug operations")
Fixes: a3ee360f4440 ("eal: add hotplug add/remove device")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_eal/common/eal_common_dev.c | 2 +-
lib/librte_eal/common/eal_common_pci.c | 2 +-
lib/librte_eal/common/eal_common_vdev.c | 2 +-
lib/librte_eal/common/include/rte_bus.h | 6 +-----
4 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/lib/librte_eal/common/eal_common_dev.c b/lib/librte_eal/common/eal_common_dev.c
index 143c231..42e91db 100644
--- a/lib/librte_eal/common/eal_common_dev.c
+++ b/lib/librte_eal/common/eal_common_dev.c
@@ -188,7 +188,7 @@ rte_eal_hotplug_add(const char *busname, const char *devname,
goto err_devarg;
}
- ret = bus->plug(dev, devargs);
+ ret = bus->plug(dev);
if (ret) {
RTE_LOG(ERR, EAL, "Driver cannot attach the device (%s)\n",
dev->name);
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index a9a04db..adfe644 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -535,7 +535,7 @@ pci_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
}
static int
-pci_plug(struct rte_device *dev, const char *devargs __rte_unused)
+pci_plug(struct rte_device *dev)
{
return pci_probe_all_drivers(RTE_DEV_TO_PCI(dev));
}
diff --git a/lib/librte_eal/common/eal_common_vdev.c b/lib/librte_eal/common/eal_common_vdev.c
index 5f1c224..ea3917a 100644
--- a/lib/librte_eal/common/eal_common_vdev.c
+++ b/lib/librte_eal/common/eal_common_vdev.c
@@ -356,7 +356,7 @@ vdev_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
}
static int
-vdev_plug(struct rte_device *dev, const char *args __rte_unused)
+vdev_plug(struct rte_device *dev)
{
return vdev_probe_all_drivers(RTE_DEV_TO_VDEV(dev));
}
diff --git a/lib/librte_eal/common/include/rte_bus.h b/lib/librte_eal/common/include/rte_bus.h
index 37cc230..167635a 100644
--- a/lib/librte_eal/common/include/rte_bus.h
+++ b/lib/librte_eal/common/include/rte_bus.h
@@ -114,15 +114,11 @@ typedef struct rte_device *
* @param dev
* Device pointer that was returned by a previous call to find_device.
*
- * @param devargs
- * Device declaration.
- *
* @return
* 0 on success.
* !0 on error.
*/
-typedef int (*rte_bus_plug_t)(struct rte_device *dev,
- const char *devargs);
+typedef int (*rte_bus_plug_t)(struct rte_device *dev);
/**
* Implementation specific remove function which is responsible for unlinking
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 11/22] ethdev: save VLAN filter setting
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (9 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 10/22] bus: remove useless plug parameter Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 12/22] ethdev: add deferred intermediate device state Gaetan Rivet
` (13 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Other configuration items (i.e. MAC addresses) are stored within
rte_eth_dev_data, but not this one.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 19 ++++++++++++++++++-
lib/librte_ether/rte_ethdev.h | 10 ++++++++++
2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 957ae2a..38c5ad4 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1981,6 +1981,7 @@ int
rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
{
struct rte_eth_dev *dev;
+ int ret;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
@@ -1996,7 +1997,23 @@ rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
}
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_filter_set, -ENOTSUP);
- return (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
+ ret = (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
+ if (ret == 0) {
+ struct rte_vlan_filter_conf *vfc;
+ int vidx;
+ int vbit;
+
+ vfc = &dev->data->vlan_filter_conf;
+ vidx = vlan_id / 64;
+ vbit = vlan_id % 64;
+
+ if (on)
+ vfc->ids[vidx] |= UINT64_C(1) << vbit;
+ else
+ vfc->ids[vidx] &= ~(UINT64_C(1) << vbit);
+ }
+
+ return ret;
}
int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index d1076c8..acbbbb6 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -374,6 +374,14 @@ enum rte_vlan_type {
};
/**
+ * A structure used to describe a vlan filter.
+ * If the bit corresponding to a VID is set, such VID is on.
+ */
+struct rte_vlan_filter_conf {
+ uint64_t ids[64];
+};
+
+/**
* A structure used to configure the Receive Side Scaling (RSS) feature
* of an Ethernet port.
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
@@ -1674,6 +1682,8 @@ struct rte_eth_dev_data {
uint32_t dev_flags; /**< Capabilities */
enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
int numa_node; /**< NUMA node connection */
+ struct rte_vlan_filter_conf vlan_filter_conf;
+ /**< VLAN filter configuration. */
};
/** Device supports hotplug detach */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 12/22] ethdev: add deferred intermediate device state
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (10 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 11/22] ethdev: save VLAN filter setting Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 13/22] ethdev: count devices consistently Gaetan Rivet
` (12 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 38c5ad4..0377b97 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index acbbbb6..4b485f7 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1589,6 +1589,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 13/22] ethdev: count devices consistently
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (11 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 12/22] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 14/22] net/failsafe: add fail-safe PMD Gaetan Rivet
` (11 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 0377b97..012950a 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4b485f7..abac320 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1724,13 +1724,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 14/22] net/failsafe: add fail-safe PMD
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (12 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 13/22] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 15/22] net/failsafe: add plug-in support Gaetan Rivet
` (10 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 133 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 76 +++
drivers/net/failsafe/failsafe.c | 231 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 154 +++++
drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 227 ++++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1965 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index b4424ea..5ae007f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -336,6 +336,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 660588a..f402c4b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..056f85f
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,133 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to a ``-w`` PCI device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
+ -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..c759035
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..7cf33e8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..f07d26e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <errno.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..6c3a811
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,154 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev *
+fs_find_ethdev(const struct rte_device *dev)
+{
+ struct rte_eth_dev *eth_dev;
+ uint8_t i;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ eth_dev = &rte_eth_devices[i];
+ if (eth_dev->device == dev)
+ return eth_dev;
+ }
+ return NULL;
+}
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_device *rdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ rdev = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ ret = rdev ? 0 : -rte_errno;
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ errno ? "(" : "",
+ errno ? strerror(rte_errno) : "",
+ errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = fs_find_ethdev(rdev);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..693162e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..e7a7592
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 7d71a49..ffc089c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -120,6 +120,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 15/22] net/failsafe: add plug-in support
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (13 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 14/22] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 16/22] net/failsafe: add flexible device definition Gaetan Rivet
` (9 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 32 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 423 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 056f85f..c04891a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -102,6 +102,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -131,3 +136,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index c759035..e27bfc0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7cf33e8..888f07b 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -80,6 +80,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -128,6 +194,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index f07d26e..8f334aa 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -45,9 +45,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +223,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +272,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +295,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +318,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 6c3a811..16871df 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -88,37 +88,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -150,5 +127,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 693162e..4044473 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index e7a7592..8fb72fe 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -224,4 +245,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 16/22] net/failsafe: add flexible device definition
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (14 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 15/22] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (8 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 99 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 130 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index c04891a..1b6e110 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -91,6 +91,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -126,6 +139,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
--vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
-i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 8f334aa..c723ca3 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -30,6 +30,8 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
+#include <assert.h>
#include <string.h>
#include <errno.h>
@@ -96,6 +98,75 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ assert(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ char *new_str;
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ new_str = rte_realloc(sdev->cmdline, len,
+ RTE_CACHE_LINE_SIZE);
+ if (new_str == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ sdev->cmdline = new_str;
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -130,6 +201,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -331,6 +410,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -361,3 +442,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8fb72fe..554d7a3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread[parent not found: <cover.1499384906.git.gaetan.rivet@6wind.com>]
* [PATCH v6 11/23] ethdev: add flow API rule copy function
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 12/23] ethdev: save VLAN filter setting Gaetan Rivet
` (11 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet, Adrien Mazarguil
This allows PMDs and applications to save flow rules in their generic
format for later processing. This is useful when rules cannot be applied
immediately, such as when the device is not properly initialized.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
lib/librte_ether/rte_ether_version.map | 1 +
lib/librte_ether/rte_flow.c | 227 +++++++++++++++++++++++++++++++++
lib/librte_ether/rte_flow.h | 40 ++++++
3 files changed, 268 insertions(+)
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 019a93d..6f65f83 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -152,6 +152,7 @@ DPDK_17.08 {
global:
_rte_eth_dev_callback_process;
+ rte_flow_copy;
rte_flow_isolate;
} DPDK_17.05;
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
index c1de31b..884e4f6 100644
--- a/lib/librte_ether/rte_flow.c
+++ b/lib/librte_ether/rte_flow.c
@@ -31,14 +31,81 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <errno.h>
+#include <stddef.h>
#include <stdint.h>
+#include <string.h>
+#include <rte_common.h>
#include <rte_errno.h>
#include <rte_branch_prediction.h>
#include "rte_ethdev.h"
#include "rte_flow_driver.h"
#include "rte_flow.h"
+/**
+ * Flow elements description tables.
+ */
+struct rte_flow_desc_data {
+ const char *name;
+ size_t size;
+};
+
+/** Generate flow_item[] entry. */
+#define MK_FLOW_ITEM(t, s) \
+ [RTE_FLOW_ITEM_TYPE_ ## t] = { \
+ .name = # t, \
+ .size = s, \
+ }
+
+/** Information about known flow pattern items. */
+static const struct rte_flow_desc_data rte_flow_desc_item[] = {
+ MK_FLOW_ITEM(END, 0),
+ MK_FLOW_ITEM(VOID, 0),
+ MK_FLOW_ITEM(INVERT, 0),
+ MK_FLOW_ITEM(ANY, sizeof(struct rte_flow_item_any)),
+ MK_FLOW_ITEM(PF, 0),
+ MK_FLOW_ITEM(VF, sizeof(struct rte_flow_item_vf)),
+ MK_FLOW_ITEM(PORT, sizeof(struct rte_flow_item_port)),
+ MK_FLOW_ITEM(RAW, sizeof(struct rte_flow_item_raw)), /* +pattern[] */
+ MK_FLOW_ITEM(ETH, sizeof(struct rte_flow_item_eth)),
+ MK_FLOW_ITEM(VLAN, sizeof(struct rte_flow_item_vlan)),
+ MK_FLOW_ITEM(IPV4, sizeof(struct rte_flow_item_ipv4)),
+ MK_FLOW_ITEM(IPV6, sizeof(struct rte_flow_item_ipv6)),
+ MK_FLOW_ITEM(ICMP, sizeof(struct rte_flow_item_icmp)),
+ MK_FLOW_ITEM(UDP, sizeof(struct rte_flow_item_udp)),
+ MK_FLOW_ITEM(TCP, sizeof(struct rte_flow_item_tcp)),
+ MK_FLOW_ITEM(SCTP, sizeof(struct rte_flow_item_sctp)),
+ MK_FLOW_ITEM(VXLAN, sizeof(struct rte_flow_item_vxlan)),
+ MK_FLOW_ITEM(MPLS, sizeof(struct rte_flow_item_mpls)),
+ MK_FLOW_ITEM(GRE, sizeof(struct rte_flow_item_gre)),
+ MK_FLOW_ITEM(E_TAG, sizeof(struct rte_flow_item_e_tag)),
+ MK_FLOW_ITEM(NVGRE, sizeof(struct rte_flow_item_nvgre)),
+};
+
+/** Generate flow_action[] entry. */
+#define MK_FLOW_ACTION(t, s) \
+ [RTE_FLOW_ACTION_TYPE_ ## t] = { \
+ .name = # t, \
+ .size = s, \
+ }
+
+/** Information about known flow actions. */
+static const struct rte_flow_desc_data rte_flow_desc_action[] = {
+ MK_FLOW_ACTION(END, 0),
+ MK_FLOW_ACTION(VOID, 0),
+ MK_FLOW_ACTION(PASSTHRU, 0),
+ MK_FLOW_ACTION(MARK, sizeof(struct rte_flow_action_mark)),
+ MK_FLOW_ACTION(FLAG, 0),
+ MK_FLOW_ACTION(QUEUE, sizeof(struct rte_flow_action_queue)),
+ MK_FLOW_ACTION(DROP, 0),
+ MK_FLOW_ACTION(COUNT, 0),
+ MK_FLOW_ACTION(DUP, sizeof(struct rte_flow_action_dup)),
+ MK_FLOW_ACTION(RSS, sizeof(struct rte_flow_action_rss)), /* +queue[] */
+ MK_FLOW_ACTION(PF, 0),
+ MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
+};
+
/* Get generic flow operations structure from a port. */
const struct rte_flow_ops *
rte_flow_ops_get(uint8_t port_id, struct rte_flow_error *error)
@@ -175,3 +242,163 @@ rte_flow_isolate(uint8_t port_id,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, rte_strerror(ENOSYS));
}
+
+/** Compute storage space needed by item specification. */
+static void
+flow_item_spec_size(const struct rte_flow_item *item,
+ size_t *size, size_t *pad)
+{
+ if (!item->spec)
+ goto empty;
+ switch (item->type) {
+ union {
+ const struct rte_flow_item_raw *raw;
+ } spec;
+
+ /* Not a fall-through */
+ case RTE_FLOW_ITEM_TYPE_RAW:
+ spec.raw = item->spec;
+ *size = offsetof(struct rte_flow_item_raw, pattern) +
+ spec.raw->length * sizeof(*spec.raw->pattern);
+ break;
+ default:
+empty:
+ *size = 0;
+ break;
+ }
+ *pad = RTE_ALIGN_CEIL(*size, sizeof(double)) - *size;
+}
+
+/** Compute storage space needed by action configuration. */
+static void
+flow_action_conf_size(const struct rte_flow_action *action,
+ size_t *size, size_t *pad)
+{
+ if (!action->conf)
+ goto empty;
+ switch (action->type) {
+ union {
+ const struct rte_flow_action_rss *rss;
+ } conf;
+
+ /* Not a fall-through. */
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ conf.rss = action->conf;
+ *size = offsetof(struct rte_flow_action_rss, queue) +
+ conf.rss->num * sizeof(*conf.rss->queue);
+ break;
+ default:
+empty:
+ *size = 0;
+ break;
+ }
+ *pad = RTE_ALIGN_CEIL(*size, sizeof(double)) - *size;
+}
+
+/** Store a full rte_flow description. */
+size_t
+rte_flow_copy(struct rte_flow_desc *desc, size_t len,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow_desc *fd = NULL;
+ size_t tmp;
+ size_t pad;
+ size_t off1 = 0;
+ size_t off2 = 0;
+ size_t size = 0;
+
+store:
+ if (items) {
+ const struct rte_flow_item *item;
+
+ item = items;
+ if (fd)
+ fd->items = (void *)&fd->data[off1];
+ do {
+ struct rte_flow_item *dst = NULL;
+
+ if ((size_t)item->type >=
+ RTE_DIM(rte_flow_desc_item) ||
+ !rte_flow_desc_item[item->type].name) {
+ rte_errno = ENOTSUP;
+ return 0;
+ }
+ if (fd)
+ dst = memcpy(fd->data + off1, item,
+ sizeof(*item));
+ off1 += sizeof(*item);
+ flow_item_spec_size(item, &tmp, &pad);
+ if (item->spec) {
+ if (fd)
+ dst->spec = memcpy(fd->data + off2,
+ item->spec, tmp);
+ off2 += tmp + pad;
+ }
+ if (item->last) {
+ if (fd)
+ dst->last = memcpy(fd->data + off2,
+ item->last, tmp);
+ off2 += tmp + pad;
+ }
+ if (item->mask) {
+ if (fd)
+ dst->mask = memcpy(fd->data + off2,
+ item->mask, tmp);
+ off2 += tmp + pad;
+ }
+ off2 = RTE_ALIGN_CEIL(off2, sizeof(double));
+ } while ((item++)->type != RTE_FLOW_ITEM_TYPE_END);
+ off1 = RTE_ALIGN_CEIL(off1, sizeof(double));
+ }
+ if (actions) {
+ const struct rte_flow_action *action;
+
+ action = actions;
+ if (fd)
+ fd->actions = (void *)&fd->data[off1];
+ do {
+ struct rte_flow_action *dst = NULL;
+
+ if ((size_t)action->type >=
+ RTE_DIM(rte_flow_desc_action) ||
+ !rte_flow_desc_action[action->type].name) {
+ rte_errno = ENOTSUP;
+ return 0;
+ }
+ if (fd)
+ dst = memcpy(fd->data + off1, action,
+ sizeof(*action));
+ off1 += sizeof(*action);
+ flow_action_conf_size(action, &tmp, &pad);
+ if (action->conf) {
+ if (fd)
+ dst->conf = memcpy(fd->data + off2,
+ action->conf, tmp);
+ off2 += tmp + pad;
+ }
+ off2 = RTE_ALIGN_CEIL(off2, sizeof(double));
+ } while ((action++)->type != RTE_FLOW_ACTION_TYPE_END);
+ }
+ if (fd != NULL)
+ return size;
+ off1 = RTE_ALIGN_CEIL(off1, sizeof(double));
+ tmp = RTE_ALIGN_CEIL(offsetof(struct rte_flow_desc, data),
+ sizeof(double));
+ size = tmp + off1 + off2;
+ if (size > len)
+ return size;
+ fd = desc;
+ if (fd != NULL) {
+ *fd = (const struct rte_flow_desc) {
+ .size = size,
+ .attr = *attr,
+ };
+ tmp -= offsetof(struct rte_flow_desc, data);
+ off2 = tmp + off1;
+ off1 = tmp;
+ goto store;
+ }
+ return 0;
+}
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index cfbed30..6ac7cdb 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -1266,6 +1266,46 @@ rte_flow_query(uint8_t port_id,
int
rte_flow_isolate(uint8_t port_id, int set, struct rte_flow_error *error);
+/**
+ * Generic flow representation.
+ *
+ * This form is sufficient to describe an rte_flow independently from any
+ * PMD implementation and allows for replayability and identification.
+ */
+struct rte_flow_desc {
+ size_t size; /**< Allocated space including data[]. */
+ struct rte_flow_attr attr; /**< Attributes. */
+ struct rte_flow_item *items; /**< Items. */
+ struct rte_flow_action *actions; /**< Actions. */
+ uint8_t data[]; /**< Storage for items/actions. */
+};
+
+/**
+ * Copy an rte_flow rule description.
+ *
+ * @param[in] fd
+ * Flow rule description.
+ * @param[in] len
+ * Total size of allocated data for the flow description.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ *
+ * @return
+ * If len is greater or equal to the size of the flow, the total size of the
+ * flow description and its data.
+ * If len is lower than the size of the flow, the number of bytes that would
+ * have been written to desc had it been sufficient. Nothing is written.
+ */
+size_t
+rte_flow_copy(struct rte_flow_desc *fd, size_t len,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions);
+
#ifdef __cplusplus
}
#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 12/23] ethdev: save VLAN filter setting
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
2017-07-07 0:09 ` [PATCH v6 11/23] ethdev: add flow API rule copy function Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 13/23] ethdev: add deferred intermediate device state Gaetan Rivet
` (10 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Other configuration items (i.e. MAC addresses) are stored within
rte_eth_dev_data, but not this one.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 19 ++++++++++++++++++-
lib/librte_ether/rte_ethdev.h | 10 ++++++++++
2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 957ae2a..38c5ad4 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1981,6 +1981,7 @@ int
rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
{
struct rte_eth_dev *dev;
+ int ret;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
@@ -1996,7 +1997,23 @@ rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
}
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_filter_set, -ENOTSUP);
- return (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
+ ret = (*dev->dev_ops->vlan_filter_set)(dev, vlan_id, on);
+ if (ret == 0) {
+ struct rte_vlan_filter_conf *vfc;
+ int vidx;
+ int vbit;
+
+ vfc = &dev->data->vlan_filter_conf;
+ vidx = vlan_id / 64;
+ vbit = vlan_id % 64;
+
+ if (on)
+ vfc->ids[vidx] |= UINT64_C(1) << vbit;
+ else
+ vfc->ids[vidx] &= ~(UINT64_C(1) << vbit);
+ }
+
+ return ret;
}
int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index d1076c8..acbbbb6 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -374,6 +374,14 @@ enum rte_vlan_type {
};
/**
+ * A structure used to describe a vlan filter.
+ * If the bit corresponding to a VID is set, such VID is on.
+ */
+struct rte_vlan_filter_conf {
+ uint64_t ids[64];
+};
+
+/**
* A structure used to configure the Receive Side Scaling (RSS) feature
* of an Ethernet port.
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
@@ -1674,6 +1682,8 @@ struct rte_eth_dev_data {
uint32_t dev_flags; /**< Capabilities */
enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
int numa_node; /**< NUMA node connection */
+ struct rte_vlan_filter_conf vlan_filter_conf;
+ /**< VLAN filter configuration. */
};
/** Device supports hotplug detach */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 13/23] ethdev: add deferred intermediate device state
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
2017-07-07 0:09 ` [PATCH v6 11/23] ethdev: add flow API rule copy function Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 12/23] ethdev: save VLAN filter setting Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 14/23] ethdev: count devices consistently Gaetan Rivet
` (9 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 38c5ad4..0377b97 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index acbbbb6..4b485f7 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1589,6 +1589,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 14/23] ethdev: count devices consistently
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (2 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 13/23] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 15/23] net/failsafe: add fail-safe PMD Gaetan Rivet
` (8 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 0377b97..012950a 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4b485f7..abac320 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1724,13 +1724,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 15/23] net/failsafe: add fail-safe PMD
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (3 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 14/23] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 16/23] net/failsafe: add plug-in support Gaetan Rivet
` (7 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 133 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 76 +++
drivers/net/failsafe/failsafe.c | 231 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 154 +++++
drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 227 ++++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1965 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index b4424ea..5ae007f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -336,6 +336,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 660588a..f402c4b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..056f85f
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,133 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to a ``-w`` PCI device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
+ -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..c759035
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..7cf33e8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..f07d26e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <errno.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..6c3a811
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,154 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev *
+fs_find_ethdev(const struct rte_device *dev)
+{
+ struct rte_eth_dev *eth_dev;
+ uint8_t i;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ eth_dev = &rte_eth_devices[i];
+ if (eth_dev->device == dev)
+ return eth_dev;
+ }
+ return NULL;
+}
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_device *rdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ rdev = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ ret = rdev ? 0 : -rte_errno;
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ errno ? "(" : "",
+ errno ? strerror(rte_errno) : "",
+ errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = fs_find_ethdev(rdev);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..693162e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..e7a7592
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 7d71a49..ffc089c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -120,6 +120,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 16/23] net/failsafe: add plug-in support
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (4 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 15/23] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 17/23] net/failsafe: add flexible device definition Gaetan Rivet
` (6 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 32 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 423 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 056f85f..c04891a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -102,6 +102,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -131,3 +136,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index c759035..e27bfc0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7cf33e8..888f07b 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -80,6 +80,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -128,6 +194,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index f07d26e..8f334aa 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -45,9 +45,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +223,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +272,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +295,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +318,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 6c3a811..16871df 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -88,37 +88,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -150,5 +127,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 693162e..4044473 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index e7a7592..8fb72fe 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -224,4 +245,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 17/23] net/failsafe: add flexible device definition
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (5 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 16/23] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 18/23] net/failsafe: support flow API Gaetan Rivet
` (5 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 99 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 130 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index c04891a..1b6e110 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -91,6 +91,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -126,6 +139,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
--vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
-i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 8f334aa..c723ca3 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -30,6 +30,8 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
+#include <assert.h>
#include <string.h>
#include <errno.h>
@@ -96,6 +98,75 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ assert(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ char *new_str;
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ new_str = rte_realloc(sdev->cmdline, len,
+ RTE_CACHE_LINE_SIZE);
+ if (new_str == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ sdev->cmdline = new_str;
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -130,6 +201,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -331,6 +410,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -361,3 +442,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8fb72fe..554d7a3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 18/23] net/failsafe: support flow API
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (6 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 17/23] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 19/23] net/failsafe: support offload capabilities Gaetan Rivet
` (4 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 216 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 337 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index e27bfc0..3cccfe0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 888f07b..6557255 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -177,6 +177,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 16871df..86e16a6 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -78,6 +78,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..d8f59a1
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4044473..4cb2e90 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -628,6 +629,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -655,4 +683,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 554d7a3..f40ea2f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 19/23] net/failsafe: support offload capabilities
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (7 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 18/23] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 20/23] net/failsafe: add fast burst functions Gaetan Rivet
` (3 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4cb2e90..5fb0135 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 20/23] net/failsafe: add fast burst functions
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (8 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 19/23] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 21/23] net/failsafe: support device removal Gaetan Rivet
` (2 subsequent siblings)
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 124 ++++++++++++++++++++++++++------
2 files changed, 112 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index f40ea2f..25a4dac 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -299,6 +306,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..c15025f 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,63 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
+
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +110,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +123,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ assert(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +168,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ assert(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 21/23] net/failsafe: support device removal
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (9 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 20/23] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 22/23] net/failsafe: support link status change event Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 23/23] net/failsafe: support flow API isolation mode Gaetan Rivet
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 38 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 1b6e110..4154f0a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation options
@@ -170,3 +176,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 6557255..4d35860 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -132,6 +132,7 @@ fs_hotplug_alarm(void *arg)
if (!PRIV(dev)->pending_alarm)
return;
PRIV(dev)->pending_alarm = 0;
+ failsafe_dev_remove(dev);
FOREACH_SUBDEV(sdev, i, dev)
if (sdev->state != PRIV(dev)->state)
break;
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index c723ca3..dd55aaf 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -443,6 +443,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -455,6 +466,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 86e16a6..3321dda 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -79,6 +79,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -96,7 +97,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5fb0135..2e1c798 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -33,6 +33,8 @@
#include <assert.h>
#include <stdint.h>
+
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 25a4dac..6a8041d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#ifndef NDEBUG
#include <stdio.h>
#define DEBUG__(m, ...) \
@@ -274,33 +318,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index c15025f..82a8c4e 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -33,6 +33,7 @@
#include <assert.h>
+#include <rte_atomic.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -113,8 +114,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -147,8 +150,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
assert(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -165,13 +170,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -182,10 +191,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
assert(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 22/23] net/failsafe: support link status change event
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (10 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 21/23] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 23/23] net/failsafe: support flow API isolation mode Gaetan Rivet
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 4d35860..151f823 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -240,6 +240,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2e1c798..05221bc 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6a8041d..6b34998 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 23/23] net/failsafe: support flow API isolation mode
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
` (11 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 22/23] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
12 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index d8f59a1..a5598ae 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -207,10 +207,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6b34998..a071ad9 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread
* [PATCH v6 17/22] net/failsafe: support flow API
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (16 preceding siblings ...)
[not found] ` <cover.1499384906.git.gaetan.rivet@6wind.com>
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 18/22] net/failsafe: support offload capabilities Gaetan Rivet
` (6 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 216 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 337 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index e27bfc0..3cccfe0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 888f07b..6557255 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -177,6 +177,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 16871df..86e16a6 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -78,6 +78,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..d8f59a1
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4044473..4cb2e90 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -628,6 +629,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -655,4 +683,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 554d7a3..f40ea2f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 18/22] net/failsafe: support offload capabilities
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (17 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 17/22] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 19/22] net/failsafe: add fast burst functions Gaetan Rivet
` (5 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4cb2e90..5fb0135 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 19/22] net/failsafe: add fast burst functions
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (18 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 18/22] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 20/22] net/failsafe: support device removal Gaetan Rivet
` (4 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 124 ++++++++++++++++++++++++++------
2 files changed, 112 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index f40ea2f..25a4dac 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -299,6 +306,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..c15025f 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,63 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
+
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +110,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +123,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ assert(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +168,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ assert(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 20/22] net/failsafe: support device removal
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (19 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 19/22] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 21/22] net/failsafe: support link status change event Gaetan Rivet
` (3 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 38 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 1b6e110..4154f0a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation options
@@ -170,3 +176,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 6557255..4d35860 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -132,6 +132,7 @@ fs_hotplug_alarm(void *arg)
if (!PRIV(dev)->pending_alarm)
return;
PRIV(dev)->pending_alarm = 0;
+ failsafe_dev_remove(dev);
FOREACH_SUBDEV(sdev, i, dev)
if (sdev->state != PRIV(dev)->state)
break;
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index c723ca3..dd55aaf 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -443,6 +443,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -455,6 +466,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 86e16a6..3321dda 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -79,6 +79,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -96,7 +97,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5fb0135..2e1c798 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -33,6 +33,8 @@
#include <assert.h>
#include <stdint.h>
+
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 25a4dac..6a8041d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#ifndef NDEBUG
#include <stdio.h>
#define DEBUG__(m, ...) \
@@ -274,33 +318,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index c15025f..82a8c4e 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -33,6 +33,7 @@
#include <assert.h>
+#include <rte_atomic.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -113,8 +114,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -147,8 +150,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
assert(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -165,13 +170,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -182,10 +191,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
assert(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 21/22] net/failsafe: support link status change event
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (20 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 20/22] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 0:09 ` [PATCH v6 22/22] net/failsafe: support flow API isolation mode Gaetan Rivet
` (2 subsequent siblings)
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 4d35860..151f823 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -240,6 +240,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2e1c798..05221bc 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6a8041d..6b34998 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v6 22/22] net/failsafe: support flow API isolation mode
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (21 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 21/22] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-07 0:09 ` Gaetan Rivet
2017-07-07 10:05 ` [PATCH v6 00/22] introduce fail-safe PMD Ferruh Yigit
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
24 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-07 0:09 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index d8f59a1..a5598ae 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -207,10 +207,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6b34998..a071ad9 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v6 00/22] introduce fail-safe PMD
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (22 preceding siblings ...)
2017-07-07 0:09 ` [PATCH v6 22/22] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-07 10:05 ` Ferruh Yigit
2017-07-07 10:08 ` Gaëtan Rivet
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
24 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-07 10:05 UTC (permalink / raw)
To: Gaetan Rivet, dev, Thomas Monjalon
On 7/7/2017 1:09 AM, Gaetan Rivet wrote:
> This PMD intercepts and manages Ethernet device removal events issued by
> slave PMDs and re-initializes them transparently when brought back so that
> existing applications do not need to be modified to benefit from true
> hot-plugging support.
>
> The stacked PMD approach shares many similarities with the bonding PMD but
> with a different purpose. While bonding provides the ability to group
> several links into a single logical device for enhanced throughput and
> supports fail-over at link level, this one manages the sudden disappearance
> of the underlying device; it guarantees applications face a valid device in
> working order at all times.
>
> Each fail-safe instance is configured to run atop one or several
> devices, with one defined as the preferred device. Hot-plug events are
> handled on all of them, and Tx is always directed to the preferred device
> if present or to the next available failover device (Rx is always performed
> on all devices for simplicity).
>
> Moreover, the configured slaves (preferred or failover) do not need to be
> present at initialization time and may appear later.
>
> Slaves configuration is continuously synchronized with that of the virtual
> device, which exposes their common set of capabilities to the application.
> Failure to apply the current configuration state to a slave for any reason
> simply reschedules its initialization.
>
> This patchset depends on:
>
> eal: complete attach / detach support
> http://dpdk.org/ml/archives/dev/2017-May/066366.html
> http://dpdk.org/dev/patchwork/patch/24522/
>
> ethdev: add flow API rule copy function
> http://dpdk.org/ml/archives/dev/2017-May/066145.html
> http://dpdk.org/dev/patchwork/patch/24406/
>
> ethdev: add isolated mode to flow API
> http://dpdk.org/ml/archives/dev/2017-April/064327.html
> http://dpdk.org/dev/patchwork/patch/23741/
>
> v1 --> v2:
>
> - Wrote documentation
> - Fixed commit logs, signed-off-by
> - Added LSC event support
> - A few minor fixes
>
> v2 --> v3:
>
> - Numerous bug fixes.
> - Complete sub-EAL rework to follow new bus API.
> - burst protection on sub removal.
> - more flexible sub definition.
> - flow isolated mode support.
>
> v3 --> v4:
>
> - Split back commits
> net/failsafe: add fast burst functions
> net/failsafe: support device removal
> That were squashed by error during a rebase
> - Fix segfault on port plugin
> - Fix isolate mode support for MLX4 ports plugin
>
> v4 --> v5:
>
> - Follow new plug / unplug API.
>
> v5 --> v6:
>
> - Follow new hotplug API.
> - Improve usability of hotplug API.
> - Fix rte_dev hotplug API implementation.
> - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
> - Use it to clean up resources on hotplug_remove.
> - Fix hotplug implementation and support un pci bus.
> The scan was not idempotent, nor clean.
> Neither were the device fields.
> - Implement plug operation for vdev bus.
> This is needed for hotplug support and to make the EAL
> independent from vdev-specific API.
> - Remove useless parameters from plug / unplug API.
>
> This patchset is fairly big and complex. The hotplug API has been rushed and
> has never been tested outside of the special case of vdev bus.
>
> These evolutions are proposed alongside this PMD as only this PMD allows to test
> this API at the moment, and without those evolutions this PMD cannot be used.
>
> Gaetan Rivet (22):
> eal: return device handle upon plugin
> eal: fix hotplug add
> devargs: introduce removal function
> eal: release devargs on device removal
> pci: use given name as generic name
> pci: fix generic driver pointer on probe error
> pci: fix hotplug operations
> vdev: add dev to vdev macro
> vdev: implement plug operation
> bus: remove useless plug parameter
> ethdev: save VLAN filter setting
> ethdev: add deferred intermediate device state
> ethdev: count devices consistently
> net/failsafe: add fail-safe PMD
> net/failsafe: add plug-in support
> net/failsafe: add flexible device definition
> net/failsafe: support flow API
> net/failsafe: support offload capabilities
> net/failsafe: add fast burst functions
> net/failsafe: support device removal
> net/failsafe: support link status change event
> net/failsafe: support flow API isolation mode
Hi Gaetan,
The failsafe PMD postponed to RC2, to mainly let eal level dependencies
be resolved first, and I believe it is OK to get a PMD in RC2 because
its scope is limited.
But in this new version of the patchset, there are many patches touches
to eal and ethdev level. I don't think it is good idea to get these
changes in RC2 and with next-net tree.
I believe these should be resolved in main repo, in RC1. And failsafe as
a PMD, can go in RC2 via next-net.
What do you think separating eal and ethdev bits of the patchset and
target RC1?
Thanks,
ferruh
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v6 00/22] introduce fail-safe PMD
2017-07-07 10:05 ` [PATCH v6 00/22] introduce fail-safe PMD Ferruh Yigit
@ 2017-07-07 10:08 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-07 10:08 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev, Thomas Monjalon
On Fri, Jul 07, 2017 at 11:05:22AM +0100, Ferruh Yigit wrote:
> On 7/7/2017 1:09 AM, Gaetan Rivet wrote:
> > This PMD intercepts and manages Ethernet device removal events issued by
> > slave PMDs and re-initializes them transparently when brought back so that
> > existing applications do not need to be modified to benefit from true
> > hot-plugging support.
> >
> > The stacked PMD approach shares many similarities with the bonding PMD but
> > with a different purpose. While bonding provides the ability to group
> > several links into a single logical device for enhanced throughput and
> > supports fail-over at link level, this one manages the sudden disappearance
> > of the underlying device; it guarantees applications face a valid device in
> > working order at all times.
> >
> > Each fail-safe instance is configured to run atop one or several
> > devices, with one defined as the preferred device. Hot-plug events are
> > handled on all of them, and Tx is always directed to the preferred device
> > if present or to the next available failover device (Rx is always performed
> > on all devices for simplicity).
> >
> > Moreover, the configured slaves (preferred or failover) do not need to be
> > present at initialization time and may appear later.
> >
> > Slaves configuration is continuously synchronized with that of the virtual
> > device, which exposes their common set of capabilities to the application.
> > Failure to apply the current configuration state to a slave for any reason
> > simply reschedules its initialization.
> >
> > This patchset depends on:
> >
> > eal: complete attach / detach support
> > http://dpdk.org/ml/archives/dev/2017-May/066366.html
> > http://dpdk.org/dev/patchwork/patch/24522/
> >
> > ethdev: add flow API rule copy function
> > http://dpdk.org/ml/archives/dev/2017-May/066145.html
> > http://dpdk.org/dev/patchwork/patch/24406/
> >
> > ethdev: add isolated mode to flow API
> > http://dpdk.org/ml/archives/dev/2017-April/064327.html
> > http://dpdk.org/dev/patchwork/patch/23741/
> >
> > v1 --> v2:
> >
> > - Wrote documentation
> > - Fixed commit logs, signed-off-by
> > - Added LSC event support
> > - A few minor fixes
> >
> > v2 --> v3:
> >
> > - Numerous bug fixes.
> > - Complete sub-EAL rework to follow new bus API.
> > - burst protection on sub removal.
> > - more flexible sub definition.
> > - flow isolated mode support.
> >
> > v3 --> v4:
> >
> > - Split back commits
> > net/failsafe: add fast burst functions
> > net/failsafe: support device removal
> > That were squashed by error during a rebase
> > - Fix segfault on port plugin
> > - Fix isolate mode support for MLX4 ports plugin
> >
> > v4 --> v5:
> >
> > - Follow new plug / unplug API.
> >
> > v5 --> v6:
> >
> > - Follow new hotplug API.
> > - Improve usability of hotplug API.
> > - Fix rte_dev hotplug API implementation.
> > - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
> > - Use it to clean up resources on hotplug_remove.
> > - Fix hotplug implementation and support un pci bus.
> > The scan was not idempotent, nor clean.
> > Neither were the device fields.
> > - Implement plug operation for vdev bus.
> > This is needed for hotplug support and to make the EAL
> > independent from vdev-specific API.
> > - Remove useless parameters from plug / unplug API.
> >
> > This patchset is fairly big and complex. The hotplug API has been rushed and
> > has never been tested outside of the special case of vdev bus.
> >
> > These evolutions are proposed alongside this PMD as only this PMD allows to test
> > this API at the moment, and without those evolutions this PMD cannot be used.
> >
> > Gaetan Rivet (22):
> > eal: return device handle upon plugin
> > eal: fix hotplug add
> > devargs: introduce removal function
> > eal: release devargs on device removal
> > pci: use given name as generic name
> > pci: fix generic driver pointer on probe error
> > pci: fix hotplug operations
> > vdev: add dev to vdev macro
> > vdev: implement plug operation
> > bus: remove useless plug parameter
> > ethdev: save VLAN filter setting
> > ethdev: add deferred intermediate device state
> > ethdev: count devices consistently
> > net/failsafe: add fail-safe PMD
> > net/failsafe: add plug-in support
> > net/failsafe: add flexible device definition
> > net/failsafe: support flow API
> > net/failsafe: support offload capabilities
> > net/failsafe: add fast burst functions
> > net/failsafe: support device removal
> > net/failsafe: support link status change event
> > net/failsafe: support flow API isolation mode
>
> Hi Gaetan,
>
> The failsafe PMD postponed to RC2, to mainly let eal level dependencies
> be resolved first, and I believe it is OK to get a PMD in RC2 because
> its scope is limited.
>
> But in this new version of the patchset, there are many patches touches
> to eal and ethdev level. I don't think it is good idea to get these
> changes in RC2 and with next-net tree.
>
> I believe these should be resolved in main repo, in RC1. And failsafe as
> a PMD, can go in RC2 via next-net.
>
> What do you think separating eal and ethdev bits of the patchset and
> target RC1?
>
Sure, I'm all for it. The only reason I presented them both at once was
because the changes that would then be included in RC1 will be hard to
test without the fail-safe PMD.
But it makes sense to stabilize the lib changes before integrating the
fail-safe.
> Thanks,
> ferruh
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v7 00/11] introduce fail-safe PMD
2017-07-07 0:09 ` [PATCH v6 00/22] " Gaetan Rivet
` (23 preceding siblings ...)
2017-07-07 10:05 ` [PATCH v6 00/22] introduce fail-safe PMD Ferruh Yigit
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
` (11 more replies)
24 siblings, 12 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This PMD intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back so that
existing applications do not need to be modified to benefit from true
hot-plugging support.
The stacked PMD approach shares many similarities with the bonding PMD but
with a different purpose. While bonding provides the ability to group
several links into a single logical device for enhanced throughput and
supports fail-over at link level, this one manages the sudden disappearance
of the underlying device; it guarantees applications face a valid device in
working order at all times.
Each fail-safe instance is configured to run atop one or several
devices, with one defined as the preferred device. Hot-plug events are
handled on all of them, and Tx is always directed to the preferred device
if present or to the next available failover device (Rx is always performed
on all devices for simplicity).
Moreover, the configured slaves (preferred or failover) do not need to be
present at initialization time and may appear later.
Slaves configuration is continuously synchronized with that of the virtual
device, which exposes their common set of capabilities to the application.
Failure to apply the current configuration state to a slave for any reason
simply reschedules its initialization.
This patchset depends on:
eal: complete attach / detach support
http://dpdk.org/ml/archives/dev/2017-May/066366.html
http://dpdk.org/dev/patchwork/patch/24522/
ethdev: add flow API rule copy function
http://dpdk.org/ml/archives/dev/2017-May/066145.html
http://dpdk.org/dev/patchwork/patch/24406/
ethdev: add isolated mode to flow API
http://dpdk.org/ml/archives/dev/2017-April/064327.html
http://dpdk.org/dev/patchwork/patch/23741/
v1 --> v2:
- Wrote documentation
- Fixed commit logs, signed-off-by
- Added LSC event support
- A few minor fixes
v2 --> v3:
- Numerous bug fixes.
- Complete sub-EAL rework to follow new bus API.
- burst protection on sub removal.
- more flexible sub definition.
- flow isolated mode support.
v3 --> v4:
- Split back commits
net/failsafe: add fast burst functions
net/failsafe: support device removal
That were squashed by error during a rebase
- Fix segfault on port plugin
- Fix isolate mode support for MLX4 ports plugin
v4 --> v5:
- Follow new plug / unplug API.
v5 --> v6:
- Follow new hotplug API.
- Improve usability of hotplug API.
- Fix rte_dev hotplug API implementation.
- Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
- Use it to clean up resources on hotplug_remove.
- Fix hotplug implementation and support un pci bus.
The scan was not idempotent, nor clean.
Neither were the device fields.
- Implement plug operation for vdev bus.
This is needed for hotplug support and to make the EAL
independent from vdev-specific API.
- Remove useless parameters from plug / unplug API.
This patchset is fairly big and complex. The hotplug API has been rushed and
has never been tested outside of the special case of vdev bus.
These evolutions are proposed alongside this PMD as only this PMD allows to test
this API at the moment, and without those evolutions this PMD cannot be used.
v6 --> v7
- Split the series in three, with
vlan filter configuration store standing alone
Hotplug API fixes separated
Fail-safe PMD on its own.
These changes should ease integration.
Gaetan Rivet (11):
ethdev: add deferred intermediate device state
ethdev: count devices consistently
net/failsafe: add fail-safe PMD
net/failsafe: add plug-in support
net/failsafe: add flexible device definition
net/failsafe: support flow API
net/failsafe: support offload capabilities
net/failsafe: add fast burst functions
net/failsafe: support device removal
net/failsafe: support link status change event
net/failsafe: support flow API isolation mode
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 186 +++++
doc/guides/nics/features/failsafe.ini | 32 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 78 ++
drivers/net/failsafe/failsafe.c | 305 ++++++++
drivers/net/failsafe/failsafe_args.c | 475 ++++++++++++
drivers/net/failsafe/failsafe_eal.c | 134 ++++
drivers/net/failsafe/failsafe_ether.c | 437 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 245 ++++++
drivers/net/failsafe/failsafe_ops.c | 869 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 376 ++++++++++
drivers/net/failsafe/failsafe_rxtx.c | 204 +++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
lib/librte_ether/rte_ethdev.c | 19 +-
lib/librte_ether/rte_ethdev.h | 14 +-
mk/rte.app.mk | 1 +
19 files changed, 3378 insertions(+), 15 deletions(-)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ether.c
create mode 100644 drivers/net/failsafe/failsafe_flow.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
--
2.1.4
^ permalink raw reply [flat|nested] 195+ messages in thread* [PATCH v7 01/11] ethdev: add deferred intermediate device state
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 02/11] ethdev: count devices consistently Gaetan Rivet
` (10 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 76179fd..69896e9 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 93182b8..d894af6 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1589,6 +1589,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 02/11] ethdev: count devices consistently
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
` (9 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 69896e9..8f41a68 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index d894af6..d9a712a 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1724,13 +1724,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 03/11] net/failsafe: add fail-safe PMD
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 02/11] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 11:10 ` Jan Blunck
2017-07-09 15:02 ` Thomas Monjalon
2017-07-09 1:47 ` [PATCH v7 04/11] net/failsafe: add plug-in support Gaetan Rivet
` (8 subsequent siblings)
11 siblings, 2 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 133 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 76 +++
drivers/net/failsafe/failsafe.c | 231 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 154 +++++
drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 227 ++++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1965 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 8fb2132..b4a446f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -336,6 +336,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index bb1ba8b..cf5e7f5 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..056f85f
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,133 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to a ``-w`` PCI device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
+ -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..c759035
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..7cf33e8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..f07d26e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <errno.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..6c3a811
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,154 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev *
+fs_find_ethdev(const struct rte_device *dev)
+{
+ struct rte_eth_dev *eth_dev;
+ uint8_t i;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ eth_dev = &rte_eth_devices[i];
+ if (eth_dev->device == dev)
+ return eth_dev;
+ }
+ return NULL;
+}
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_device *rdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ rdev = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ ret = rdev ? 0 : -rte_errno;
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ errno ? "(" : "",
+ errno ? strerror(rte_errno) : "",
+ errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = fs_find_ethdev(rdev);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..693162e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..e7a7592
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index dbd3614..d7581b7 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -120,6 +120,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v7 03/11] net/failsafe: add fail-safe PMD
2017-07-09 1:47 ` [PATCH v7 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-09 11:10 ` Jan Blunck
2017-07-09 12:35 ` Gaëtan Rivet
2017-07-09 15:02 ` Thomas Monjalon
1 sibling, 1 reply; 195+ messages in thread
From: Jan Blunck @ 2017-07-09 11:10 UTC (permalink / raw)
To: Gaetan Rivet; +Cc: dev
On Sat, Jul 8, 2017 at 9:47 PM, Gaetan Rivet <gaetan.rivet@6wind.com> wrote:
> Introduce the fail-safe poll mode driver initialization and enable its
> build infrastructure.
>
> This PMD allows for applications to benefit from true hot-plugging
> support without having to implement it.
>
> It intercepts and manages Ethernet device removal events issued by
> slave PMDs and re-initializes them transparently when brought back.
> It also allows defining a contingency to the removal of a device, by
> designating a fail-over device that will take on transmitting operations
> if the preferred device is removed.
>
> Applications only see a fail-safe instance, without caring for
> underlying activity ensuring their continued operations.
>
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> Acked-by: Olga Shern <olgas@mellanox.com>
> ---
> MAINTAINERS | 5 +
> config/common_base | 6 +
> doc/guides/nics/fail_safe.rst | 133 +++++
> doc/guides/nics/features/failsafe.ini | 24 +
> doc/guides/nics/index.rst | 1 +
> drivers/net/Makefile | 2 +
> drivers/net/failsafe/Makefile | 76 +++
> drivers/net/failsafe/failsafe.c | 231 ++++++++
> drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
> drivers/net/failsafe/failsafe_eal.c | 154 +++++
> drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
> drivers/net/failsafe/failsafe_private.h | 227 ++++++++
> drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
> drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
> mk/rte.app.mk | 1 +
> 15 files changed, 1965 insertions(+)
> create mode 100644 doc/guides/nics/fail_safe.rst
> create mode 100644 doc/guides/nics/features/failsafe.ini
> create mode 100644 drivers/net/failsafe/Makefile
> create mode 100644 drivers/net/failsafe/failsafe.c
> create mode 100644 drivers/net/failsafe/failsafe_args.c
> create mode 100644 drivers/net/failsafe/failsafe_eal.c
> create mode 100644 drivers/net/failsafe/failsafe_ops.c
> create mode 100644 drivers/net/failsafe/failsafe_private.h
> create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
> create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8fb2132..b4a446f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -336,6 +336,11 @@ F: drivers/net/enic/
> F: doc/guides/nics/enic.rst
> F: doc/guides/nics/features/enic.ini
>
> +Fail-safe PMD
> +M: Gaetan Rivet <gaetan.rivet@6wind.com>
> +F: drivers/net/failsafe/
> +F: doc/guides/nics/fail_safe.rst
> +
> Intel e1000
> M: Wenzhuo Lu <wenzhuo.lu@intel.com>
> F: drivers/net/e1000/
> diff --git a/config/common_base b/config/common_base
> index bb1ba8b..cf5e7f5 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
> CONFIG_RTE_LIBRTE_PMD_NULL=y
>
> #
> +# Compile fail-safe PMD
> +#
> +CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
> +CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
> +
> +#
> # Do prefetch of packet data within PMD driver receive function
> #
> CONFIG_RTE_PMD_PACKET_PREFETCH=y
> diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
> new file mode 100644
> index 0000000..056f85f
> --- /dev/null
> +++ b/doc/guides/nics/fail_safe.rst
> @@ -0,0 +1,133 @@
> +.. BSD LICENSE
> + Copyright 2017 6WIND S.A.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + * Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> + * Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> + * Neither the name of 6WIND S.A. nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +Fail-safe poll mode driver library
> +==================================
> +
> +The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
> +device that allows using any device supporting hotplug (sudden device removal
> +and plugging on its bus), without modifying other components relying on such
> +device (application, other PMDs).
> +
> +Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
> +ability to redirect operations to secondary devices when the primary has been
> +removed from the system.
> +
> +.. note::
> +
> + The library is enabled by default. You can enable it or disable it manually
> + by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
> +
> +Features
> +--------
> +
> +The Fail-safe PMD only supports a limited set of features. If you plan to use a
> +device underneath the Fail-safe PMD with a specific feature, this feature must
> +be supported by the Fail-safe PMD to avoid throwing any error.
> +
> +Check the feature matrix for the complete set of supported features.
> +
> +Compilation options
> +-------------------
> +
> +These options can be modified in the ``$RTE_TARGET/build/.config`` file.
> +
> +- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
> +
> + Toggle compiling librte_pmd_failsafe itself.
> +
> +- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
> +
> + Toggle debugging code.
> +
> +Using the Fail-safe PMD from the EAL command line
> +-------------------------------------------------
> +
> +The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
> +``--vdev`` parameter to the EAL when starting the application. The device name
> +must start with the *net_failsafe* prefix, followed by numbers or letters. This
> +name must be unique for each device. Each fail-safe instance must have at least one
> +sub-device, up to ``RTE_MAX_ETHPORTS-1``.
> +
> +A sub-device can be any legal DPDK device, including possibly another fail-safe
> +instance.
> +
> +Fail-safe command line parameters
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +- **dev(<iface>)** parameter
> +
> + This parameter allows the user to define a sub-device. The ``<iface>`` part of
> + this parameter must be a valid device definition. It could be the argument
> + provided to a ``-w`` PCI device specification or the argument that would be
> + given to a ``--vdev`` parameter (including a fail-safe).
> + Enclosing the device definition within parenthesis here allows using
> + additional sub-device parameters if need be. They will be passed on to the
> + sub-device.
> +
> +- **mac** parameter [MAC address]
> +
> + This parameter allows the user to set a default MAC address to the fail-safe
> + and all of its sub-devices.
> + If no default mac address is provided, the fail-safe PMD will read the MAC
> + address of the first of its sub-device to be successfully probed and use it as
> + its default MAC address, trying to set it to all of its other sub-devices.
> + If no sub-device was successfully probed at initialization, then a random MAC
> + address is generated, that will be subsequently applied to all sub-device once
> + they are probed.
> +
> +Usage example
> +~~~~~~~~~~~~~
> +
> +This section shows some example of using **testpmd** with a fail-safe PMD.
> +
> +#. Request huge pages:
> +
> + .. code-block:: console
> +
> + echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
> +
> +#. Start testpmd
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
> + --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
> + -i
> +
> +Using the Fail-safe PMD from an application
> +-------------------------------------------
> +
> +This driver strives to be as seamless as possible to existing applications, in
> +order to propose the hotplug functionality in the easiest way possible.
> +
> +Care must be taken, however, to respect the **ether** API concerning device
> +access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
> +over ethernet devices, instead of directly accessing them or by writing one's
> +own device iterator.
> diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
> new file mode 100644
> index 0000000..3c52823
> --- /dev/null
> +++ b/doc/guides/nics/features/failsafe.ini
> @@ -0,0 +1,24 @@
> +;
> +; Supported features of the 'fail-safe' poll mode driver.
> +;
> +; Refer to default.ini for the full list of available PMD features.
> +;
> +[Features]
> +Link status = Y
> +Queue start/stop = Y
> +MTU update = Y
> +Jumbo frame = Y
> +Promiscuous mode = Y
> +Allmulticast mode = Y
> +Unicast MAC filter = Y
> +Multicast MAC filter = Y
> +VLAN filter = Y
> +Packet type parsing = Y
> +Basic stats = Y
> +Stats per queue = Y
> +ARMv7 = Y
> +ARMv8 = Y
> +Power8 = Y
> +x86-32 = Y
> +x86-64 = Y
> +Usage doc = Y
> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> index 240d082..17eaaf4 100644
> --- a/doc/guides/nics/index.rst
> +++ b/doc/guides/nics/index.rst
> @@ -64,6 +64,7 @@ Network Interface Controller Drivers
> vhost
> vmxnet3
> pcap_ring
> + fail_safe
>
> **Figures**
>
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 35ed813..d33c959 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
> DEPDIRS-ena = $(core-libs)
> DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
> DEPDIRS-enic = $(core-libs) librte_hash
> +DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
> +DEPDIRS-failsafe = $(core-libs)
> DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
> DEPDIRS-fm10k = $(core-libs) librte_hash
> DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
> diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
> new file mode 100644
> index 0000000..c759035
> --- /dev/null
> +++ b/drivers/net/failsafe/Makefile
> @@ -0,0 +1,76 @@
> +# BSD LICENSE
> +#
> +# Copyright 2017 6WIND S.A.
> +# Copyright 2017 Mellanox.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of 6WIND S.A. nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# Library name
> +LIB = librte_pmd_failsafe.a
> +
> +EXPORT_MAP := rte_pmd_failsafe_version.map
> +
> +LIBABIVER := 1
> +
> +# Sources are stored in SRCS-y
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
> +
> +# No exported include files
> +
> +# This lib depends upon:
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
> +
> +ifneq ($(DEBUG),)
> +CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
> +endif
> +
> +# Basic CFLAGS:
> +CFLAGS += -std=gnu99 -Wall -Wextra
> +CFLAGS += -I.
> +CFLAGS += -D_DEFAULT_SOURCE
> +CFLAGS += -D_XOPEN_SOURCE=700
> +CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -Wno-strict-prototypes
> +CFLAGS += -pedantic -DPEDANTIC
> +
> +ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
> +CFLAGS += -g -UNDEBUG
> +else
> +CFLAGS += -O3
> +CFLAGS += -DNDEBUG
> +endif
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
> new file mode 100644
> index 0000000..7cf33e8
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe.c
> @@ -0,0 +1,231 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <rte_alarm.h>
> +#include <rte_malloc.h>
> +#include <rte_ethdev.h>
> +#include <rte_ethdev_vdev.h>
> +#include <rte_devargs.h>
> +#include <rte_kvargs.h>
> +#include <rte_vdev.h>
> +
> +#include "failsafe_private.h"
> +
> +const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
> +static const struct rte_eth_link eth_link = {
> + .link_speed = ETH_SPEED_NUM_10G,
> + .link_duplex = ETH_LINK_FULL_DUPLEX,
> + .link_status = ETH_LINK_UP,
> + .link_autoneg = ETH_LINK_SPEED_AUTONEG,
> +};
> +
> +static int
> +fs_sub_device_create(struct rte_eth_dev *dev,
> + const char *params)
> +{
> + uint8_t nb_subs;
> + int ret;
> +
> + ret = failsafe_args_count_subdevice(dev, params);
> + if (ret)
> + return ret;
> + if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
> + ERROR("Cannot allocate more than %d ports",
> + FAILSAFE_MAX_ETHPORTS);
> + return -ENOSPC;
> + }
> + nb_subs = PRIV(dev)->subs_tail;
> + PRIV(dev)->subs = rte_zmalloc(NULL,
> + sizeof(struct sub_device) * nb_subs,
> + RTE_CACHE_LINE_SIZE);
> + if (PRIV(dev)->subs == NULL) {
> + ERROR("Could not allocate sub_devices");
> + return -ENOMEM;
> + }
> + return 0;
> +}
> +
> +static void
> +fs_sub_device_free(struct rte_eth_dev *dev)
> +{
> + rte_free(PRIV(dev)->subs);
> +}
> +
> +static int
> +fs_eth_dev_create(struct rte_vdev_device *vdev)
> +{
> + struct rte_eth_dev *dev;
> + struct ether_addr *mac;
> + struct fs_priv *priv;
> + struct sub_device *sdev;
> + const char *params;
> + unsigned int socket_id;
> + uint8_t i;
> + int ret;
> +
> + dev = NULL;
> + priv = NULL;
> + params = rte_vdev_device_args(vdev);
> + socket_id = rte_socket_id();
> + INFO("Creating fail-safe device on NUMA socket %u",
> + socket_id);
> + dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
> + if (dev == NULL) {
> + ERROR("Unable to allocate rte_eth_dev");
> + return -1;
> + }
> + priv = dev->data->dev_private;
> + PRIV(dev)->dev = dev;
> + dev->dev_ops = &failsafe_ops;
> + TAILQ_INIT(&dev->link_intr_cbs);
> + dev->data->dev_flags = 0x0;
> + dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
> + dev->data->dev_link = eth_link;
> + PRIV(dev)->nb_mac_addr = 1;
> + dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
> + dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
> + if (params == NULL) {
> + ERROR("This PMD requires sub-devices, none provided");
> + goto free_dev;
> + }
> + ret = fs_sub_device_create(dev, params);
> + if (ret) {
> + ERROR("Could not allocate sub_devices");
> + goto free_dev;
> + }
> + ret = failsafe_args_parse(dev, params);
> + if (ret)
> + goto free_subs;
> + ret = failsafe_eal_init(dev);
> + if (ret)
> + goto free_args;
> + mac = &dev->data->mac_addrs[0];
> + if (mac_from_arg) {
> + /*
> + * If MAC address was provided as a parameter,
> + * apply to all probed slaves.
> + */
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
> + ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
> + mac);
> + if (ret) {
> + ERROR("Failed to set default MAC address");
> + goto free_args;
> + }
> + }
> + } else {
> + /*
> + * Use the ether_addr from first probed
> + * device, either preferred or fallback.
> + */
> + FOREACH_SUBDEV(sdev, i, dev)
> + if (sdev->state >= DEV_PROBED) {
> + ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
> + mac);
> + break;
> + }
> + /*
> + * If no device has been probed and no ether_addr
> + * has been provided on the command line, use a random
> + * valid one.
> + * It will be applied during future slave state syncs to
> + * probed slaves.
> + */
> + if (i == priv->subs_tail)
> + eth_random_addr(&mac->addr_bytes[0]);
> + }
> + INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
> + mac->addr_bytes[0], mac->addr_bytes[1],
> + mac->addr_bytes[2], mac->addr_bytes[3],
> + mac->addr_bytes[4], mac->addr_bytes[5]);
> + return 0;
> +free_args:
> + failsafe_args_free(dev);
> +free_subs:
> + fs_sub_device_free(dev);
> +free_dev:
> + rte_eth_dev_release_port(dev);
> + return -1;
> +}
> +
> +static int
> +fs_rte_eth_free(const char *name)
> +{
> + struct rte_eth_dev *dev;
> + int ret;
> +
> + dev = rte_eth_dev_allocated(name);
> + if (dev == NULL)
> + return -ENODEV;
> + ret = failsafe_eal_uninit(dev);
> + if (ret)
> + ERROR("Error while uninitializing sub-EAL");
> + failsafe_args_free(dev);
> + fs_sub_device_free(dev);
> + rte_free(PRIV(dev));
> + rte_eth_dev_release_port(dev);
> + return ret;
> +}
> +
> +static int
> +rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
> +{
> + const char *name;
> +
> + name = rte_vdev_device_name(vdev);
> + if (vdev == NULL)
> + return -EINVAL;
> + INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
> + name);
> + return fs_eth_dev_create(vdev);
> +}
> +
> +static int
> +rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
> +{
> + const char *name;
> +
> + name = rte_vdev_device_name(vdev);
> + if (name == NULL)
> + return -EINVAL;
> + INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
> + return fs_rte_eth_free(name);
> +}
> +
> +static struct rte_vdev_driver failsafe_drv = {
> + .probe = rte_pmd_failsafe_probe,
> + .remove = rte_pmd_failsafe_remove,
> +};
> +
> +RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
> +RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
> +RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
> diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
> new file mode 100644
> index 0000000..f07d26e
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_args.c
> @@ -0,0 +1,331 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <string.h>
> +#include <errno.h>
> +
> +#include <rte_devargs.h>
> +#include <rte_malloc.h>
> +#include <rte_kvargs.h>
> +
> +#include "failsafe_private.h"
> +
> +#define DEVARGS_MAXLEN 4096
> +
> +/* Callback used when a new device is found in devargs */
> +typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
> + uint8_t head);
> +
> +int mac_from_arg;
> +
> +const char *pmd_failsafe_init_parameters[] = {
> + PMD_FAILSAFE_MAC_KVARG,
> + NULL,
> +};
> +
> +/*
> + * input: text.
> + * output: 0: if text[0] != '(',
> + * 0: if there are no corresponding ')'
> + * n: distance to corresponding ')' otherwise
> + */
> +static size_t
> +closing_paren(const char *text)
> +{
> + int nb_open = 0;
> + size_t i = 0;
> +
> + while (text[i] != '\0') {
> + if (text[i] == '(')
> + nb_open++;
> + if (text[i] == ')')
> + nb_open--;
> + if (nb_open == 0)
> + return i;
> + i++;
> + }
> + return 0;
> +}
> +
> +static int
> +fs_parse_device(struct sub_device *sdev, char *args)
> +{
> + struct rte_devargs *d;
> + int ret;
> +
> + d = &sdev->devargs;
> + DEBUG("%s", args);
> + ret = rte_eal_devargs_parse(args, d);
> + if (ret) {
> + DEBUG("devargs parsing failed with code %d", ret);
> + return ret;
> + }
> + sdev->bus = d->bus;
> + sdev->state = DEV_PARSED;
You seem to be mostly interested in the bus name for the device. Why
don't you track this via your sub_device structure instead of using
rte_devargs?
> + return 0;
> +}
> +
> +static int
> +fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
> + uint8_t head)
> +{
> + struct fs_priv *priv;
> + struct sub_device *sdev;
> + char *args = NULL;
> + size_t a, b;
> + int ret;
> +
> + priv = PRIV(dev);
> + a = 0;
> + b = 0;
> + ret = 0;
> + while (param[b] != '(' &&
> + param[b] != '\0')
> + b++;
> + a = b;
> + b += closing_paren(¶m[b]);
> + if (a == b) {
> + ERROR("Dangling parenthesis");
> + return -EINVAL;
> + }
> + a += 1;
> + args = strndup(¶m[a], b - a);
> + if (args == NULL) {
> + ERROR("Not enough memory for parameter parsing");
> + return -ENOMEM;
> + }
> + sdev = &priv->subs[head];
> + if (strncmp(param, "dev", 3) == 0) {
> + ret = fs_parse_device(sdev, args);
> + if (ret)
> + goto free_args;
> + } else {
> + ERROR("Unrecognized device type: %.*s", (int)b, param);
> + return -EINVAL;
> + }
> +free_args:
> + free(args);
> + return ret;
> +}
> +
> +static int
> +fs_parse_sub_devices(parse_cb *cb,
> + struct rte_eth_dev *dev, const char *params)
> +{
> + size_t a, b;
> + uint8_t head;
> + int ret;
> +
> + a = 0;
> + head = 0;
> + ret = 0;
> + while (params[a] != '\0') {
> + b = a;
> + while (params[b] != '(' &&
> + params[b] != ',' &&
> + params[b] != '\0')
> + b++;
> + if (b == a) {
> + ERROR("Invalid parameter");
> + return -EINVAL;
> + }
> + if (params[b] == ',') {
> + a = b + 1;
> + continue;
> + }
> + if (params[b] == '(') {
> + size_t start = b;
> +
> + b += closing_paren(¶ms[b]);
> + if (b == start) {
> + ERROR("Dangling parenthesis");
> + return -EINVAL;
> + }
> + ret = (*cb)(dev, ¶ms[a], head);
> + if (ret)
> + return ret;
> + head += 1;
> + b += 1;
> + if (params[b] == '\0')
> + return 0;
> + }
> + a = b + 1;
> + }
> + return 0;
> +}
> +
> +static int
> +fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
> +{
> + char buffer[DEVARGS_MAXLEN] = {0};
> + size_t a, b;
> + int i;
> +
> + a = 0;
> + i = 0;
> + while (params[a] != '\0') {
> + b = a;
> + while (params[b] != '(' &&
> + params[b] != ',' &&
> + params[b] != '\0')
> + b++;
> + if (b == a) {
> + ERROR("Invalid parameter");
> + return -EINVAL;
> + }
> + if (params[b] == ',' || params[b] == '\0')
> + i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
> + if (params[b] == '(') {
> + size_t start = b;
> + b += closing_paren(¶ms[b]);
> + if (b == start)
> + return -EINVAL;
> + b += 1;
> + if (params[b] == '\0')
> + goto out;
> + }
> + a = b + 1;
> + }
> +out:
> + snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
> + return 0;
> +}
> +
> +static int
> +fs_get_mac_addr_arg(const char *key __rte_unused,
> + const char *value, void *out)
> +{
> + struct ether_addr *ea = out;
> + int ret;
> +
> + if ((value == NULL) || (out == NULL))
> + return -EINVAL;
> + ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
> + &ea->addr_bytes[0], &ea->addr_bytes[1],
> + &ea->addr_bytes[2], &ea->addr_bytes[3],
> + &ea->addr_bytes[4], &ea->addr_bytes[5]);
> + return ret != ETHER_ADDR_LEN;
> +}
> +
> +int
> +failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
> +{
> + struct fs_priv *priv;
> + char mut_params[DEVARGS_MAXLEN] = "";
> + struct rte_kvargs *kvlist = NULL;
> + unsigned int arg_count;
> + size_t n;
> + int ret;
> +
> + if (dev == NULL || params == NULL)
> + return -EINVAL;
> + priv = PRIV(dev);
> + ret = 0;
> + priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
> + /* default parameters */
> + mac_from_arg = 0;
> + n = snprintf(mut_params, sizeof(mut_params), "%s", params);
> + if (n >= sizeof(mut_params)) {
> + ERROR("Parameter string too long (>=%zu)",
> + sizeof(mut_params));
> + return -ENOMEM;
> + }
> + ret = fs_parse_sub_devices(fs_parse_device_param,
> + dev, params);
> + if (ret < 0)
> + return ret;
> + ret = fs_remove_sub_devices_definition(mut_params);
> + if (ret < 0)
> + return ret;
> + if (strnlen(mut_params, sizeof(mut_params)) > 0) {
> + kvlist = rte_kvargs_parse(mut_params,
> + pmd_failsafe_init_parameters);
> + if (kvlist == NULL) {
> + ERROR("Error parsing parameters, usage:\n"
> + PMD_FAILSAFE_PARAM_STRING);
> + return -1;
> + }
> + /* MAC addr */
> + arg_count = rte_kvargs_count(kvlist,
> + PMD_FAILSAFE_MAC_KVARG);
> + if (arg_count == 1) {
> + ret = rte_kvargs_process(kvlist,
> + PMD_FAILSAFE_MAC_KVARG,
> + &fs_get_mac_addr_arg,
> + &dev->data->mac_addrs[0]);
> + if (ret < 0)
> + goto free_kvlist;
> + mac_from_arg = 1;
> + }
> + }
> +free_kvlist:
> + rte_kvargs_free(kvlist);
> + return ret;
> +}
> +
> +void
> +failsafe_args_free(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV(sdev, i, dev) {
> + free(sdev->devargs.args);
> + sdev->devargs.args = NULL;
> + }
> +}
> +
> +static int
> +fs_count_device(struct rte_eth_dev *dev, const char *param,
> + uint8_t head __rte_unused)
> +{
> + size_t b = 0;
> +
> + while (param[b] != '(' &&
> + param[b] != '\0')
> + b++;
> + if (strncmp(param, "dev", b) &&
> + strncmp(param, "exec", b)) {
> + ERROR("Unrecognized device type: %.*s", (int)b, param);
> + return -EINVAL;
> + }
> + PRIV(dev)->subs_tail += 1;
> + return 0;
> +}
> +
> +int
> +failsafe_args_count_subdevice(struct rte_eth_dev *dev,
> + const char *params)
> +{
> + return fs_parse_sub_devices(fs_count_device,
> + dev, params);
> +}
> diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
> new file mode 100644
> index 0000000..6c3a811
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_eal.c
> @@ -0,0 +1,154 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <rte_malloc.h>
> +
> +#include "failsafe_private.h"
> +
> +static struct rte_eth_dev *
> +fs_find_ethdev(const struct rte_device *dev)
> +{
> + struct rte_eth_dev *eth_dev;
> + uint8_t i;
> +
> + RTE_ETH_FOREACH_DEV(i) {
> + eth_dev = &rte_eth_devices[i];
> + if (eth_dev->device == dev)
> + return eth_dev;
> + }
> + return NULL;
> +}
Why don't you use rte_eth_dev_allocated() here?
> +
> +static int
> +fs_bus_init(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + struct rte_device *rdev;
> + struct rte_devargs *da;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV(sdev, i, dev) {
> + if (sdev->state != DEV_PARSED)
> + continue;
> + da = &sdev->devargs;
> + rdev = rte_eal_hotplug_add(da->bus->name,
> + da->name,
> + da->args);
Why don't you track the bus name through your sub_device structure instead?
> + ret = rdev ? 0 : -rte_errno;
> + if (ret) {
> + ERROR("sub_device %d probe failed %s%s%s", i,
> + errno ? "(" : "",
> + errno ? strerror(rte_errno) : "",
> + errno ? ")" : "");
> + continue;
> + }
> + ETH(sdev) = fs_find_ethdev(rdev);
> + if (ETH(sdev) == NULL) {
> + ERROR("sub_device %d init went wrong", i);
> + return -ENODEV;
> + }
> + sdev->dev = ETH(sdev)->device;
> + ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
> + sdev->state = DEV_PROBED;
> + }
> + return 0;
> +}
> +
> +int
> +failsafe_eal_init(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + ret = fs_bus_init(dev);
> + if (ret)
> + return ret;
> + /*
> + * We only update TX_SUBDEV if we are not started.
> + * If a sub_device is emitting, we will switch the TX_SUBDEV to the
> + * preferred port only upon starting it, so that the switch is smoother.
> + */
> + if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
> + if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
> + (TX_SUBDEV(dev) == NULL ||
> + (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
> + DEBUG("Switching tx_dev to preferred sub_device");
> + PRIV(dev)->subs_tx = 0;
> + }
> + } else {
> + if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
> + TX_SUBDEV(dev) == NULL) {
> + /* Using first probed device */
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
> + DEBUG("Switching tx_dev to sub_device %d",
> + i);
> + PRIV(dev)->subs_tx = i;
> + break;
> + }
> + }
> + }
> + return 0;
> +}
> +
> +static int
> +fs_bus_uninit(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev = NULL;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
> + ret = rte_eal_hotplug_remove(sdev->bus->name,
> + sdev->dev->name);
> + if (ret) {
> + ERROR("Failed to remove requested device %s",
> + sdev->dev->name);
> + continue;
> + }
> + sdev->state = DEV_PROBED - 1;
> + }
> + return 0;
> +}
> +
> +int
> +failsafe_eal_uninit(struct rte_eth_dev *dev)
> +{
> + int ret;
> +
> + ret = fs_bus_uninit(dev);
> + if (ret)
> + return ret;
> + return 0;
> +}
> diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
> new file mode 100644
> index 0000000..693162e
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_ops.c
> @@ -0,0 +1,663 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <assert.h>
> +#include <stdint.h>
> +#include <rte_ethdev.h>
> +#include <rte_malloc.h>
> +
> +#include "failsafe_private.h"
> +
> +static struct rte_eth_dev_info default_infos = {
> + .driver_name = pmd_failsafe_driver_name,
> + /* Max possible number of elements */
> + .max_rx_pktlen = UINT32_MAX,
> + .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
> + .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
> + .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
> + .max_hash_mac_addrs = UINT32_MAX,
> + .max_vfs = UINT16_MAX,
> + .max_vmdq_pools = UINT16_MAX,
> + .rx_desc_lim = {
> + .nb_max = UINT16_MAX,
> + .nb_min = 0,
> + .nb_align = 1,
> + .nb_seg_max = UINT16_MAX,
> + .nb_mtu_seg_max = UINT16_MAX,
> + },
> + .tx_desc_lim = {
> + .nb_max = UINT16_MAX,
> + .nb_min = 0,
> + .nb_align = 1,
> + .nb_seg_max = UINT16_MAX,
> + .nb_mtu_seg_max = UINT16_MAX,
> + },
> + /* Set of understood capabilities */
> + .rx_offload_capa = 0x0,
> + .tx_offload_capa = 0x0,
> + .flow_type_rss_offloads = 0x0,
> +};
> +
> +static int
> +fs_dev_configure(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV(sdev, i, dev) {
> + if (sdev->state != DEV_PROBED)
> + continue;
> + DEBUG("Configuring sub-device %d", i);
> + ret = rte_eth_dev_configure(PORT_ID(sdev),
> + dev->data->nb_rx_queues,
> + dev->data->nb_tx_queues,
> + &dev->data->dev_conf);
> + if (ret) {
> + ERROR("Could not configure sub_device %d", i);
> + return ret;
> + }
> + sdev->state = DEV_ACTIVE;
> + }
> + return 0;
> +}
> +
> +static int
> +fs_dev_start(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV(sdev, i, dev) {
> + if (sdev->state != DEV_ACTIVE)
> + continue;
> + DEBUG("Starting sub_device %d", i);
> + ret = rte_eth_dev_start(PORT_ID(sdev));
> + if (ret)
> + return ret;
> + sdev->state = DEV_STARTED;
> + }
> + if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
> + if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
> + DEBUG("Switching tx_dev to preferred sub_device");
> + PRIV(dev)->subs_tx = 0;
> + }
> + } else {
> + if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
> + TX_SUBDEV(dev) == NULL) {
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
> + DEBUG("Switching tx_dev to sub_device %d", i);
> + PRIV(dev)->subs_tx = i;
> + break;
> + }
> + }
> + }
> + return 0;
> +}
> +
> +static void
> +fs_dev_stop(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
> + rte_eth_dev_stop(PORT_ID(sdev));
> + sdev->state = DEV_STARTED - 1;
> + }
> +}
> +
> +static int
> +fs_dev_set_link_up(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
> + ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
> + if (ret) {
> + ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
> + " with error %d", i, ret);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static int
> +fs_dev_set_link_down(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
> + ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
> + if (ret) {
> + ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
> + " with error %d", i, ret);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static void fs_dev_free_queues(struct rte_eth_dev *dev);
> +static void
> +fs_dev_close(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Closing sub_device %d", i);
> + rte_eth_dev_close(PORT_ID(sdev));
> + sdev->state = DEV_ACTIVE - 1;
> + }
> + fs_dev_free_queues(dev);
> +}
> +
> +static void
> +fs_rx_queue_release(void *queue)
> +{
> + struct rte_eth_dev *dev;
> + struct sub_device *sdev;
> + uint8_t i;
> + struct rxq *rxq;
> +
> + if (queue == NULL)
> + return;
> + rxq = queue;
> + dev = rxq->priv->dev;
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + SUBOPS(sdev, rx_queue_release)
> + (ETH(sdev)->data->rx_queues[rxq->qid]);
> + dev->data->rx_queues[rxq->qid] = NULL;
> + rte_free(rxq);
> +}
> +
> +static int
> +fs_rx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t rx_queue_id,
> + uint16_t nb_rx_desc,
> + unsigned int socket_id,
> + const struct rte_eth_rxconf *rx_conf,
> + struct rte_mempool *mb_pool)
> +{
> + struct sub_device *sdev;
> + struct rxq *rxq;
> + uint8_t i;
> + int ret;
> +
> + rxq = dev->data->rx_queues[rx_queue_id];
> + if (rxq != NULL) {
> + fs_rx_queue_release(rxq);
> + dev->data->rx_queues[rx_queue_id] = NULL;
> + }
> + rxq = rte_zmalloc(NULL, sizeof(*rxq),
> + RTE_CACHE_LINE_SIZE);
> + if (rxq == NULL)
> + return -ENOMEM;
> + rxq->qid = rx_queue_id;
> + rxq->socket_id = socket_id;
> + rxq->info.mp = mb_pool;
> + rxq->info.conf = *rx_conf;
> + rxq->info.nb_desc = nb_rx_desc;
> + rxq->priv = PRIV(dev);
> + dev->data->rx_queues[rx_queue_id] = rxq;
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
> + rx_queue_id,
> + nb_rx_desc, socket_id,
> + rx_conf, mb_pool);
> + if (ret) {
> + ERROR("RX queue setup failed for sub_device %d", i);
> + goto free_rxq;
> + }
> + }
> + return 0;
> +free_rxq:
> + fs_rx_queue_release(rxq);
> + return ret;
> +}
> +
> +static void
> +fs_tx_queue_release(void *queue)
> +{
> + struct rte_eth_dev *dev;
> + struct sub_device *sdev;
> + uint8_t i;
> + struct txq *txq;
> +
> + if (queue == NULL)
> + return;
> + txq = queue;
> + dev = txq->priv->dev;
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + SUBOPS(sdev, tx_queue_release)
> + (ETH(sdev)->data->tx_queues[txq->qid]);
> + dev->data->tx_queues[txq->qid] = NULL;
> + rte_free(txq);
> +}
> +
> +static int
> +fs_tx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t tx_queue_id,
> + uint16_t nb_tx_desc,
> + unsigned int socket_id,
> + const struct rte_eth_txconf *tx_conf)
> +{
> + struct sub_device *sdev;
> + struct txq *txq;
> + uint8_t i;
> + int ret;
> +
> + txq = dev->data->tx_queues[tx_queue_id];
> + if (txq != NULL) {
> + fs_tx_queue_release(txq);
> + dev->data->tx_queues[tx_queue_id] = NULL;
> + }
> + txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
> + RTE_CACHE_LINE_SIZE);
> + if (txq == NULL)
> + return -ENOMEM;
> + txq->qid = tx_queue_id;
> + txq->socket_id = socket_id;
> + txq->info.conf = *tx_conf;
> + txq->info.nb_desc = nb_tx_desc;
> + txq->priv = PRIV(dev);
> + dev->data->tx_queues[tx_queue_id] = txq;
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
> + tx_queue_id,
> + nb_tx_desc, socket_id,
> + tx_conf);
> + if (ret) {
> + ERROR("TX queue setup failed for sub_device %d", i);
> + goto free_txq;
> + }
> + }
> + return 0;
> +free_txq:
> + fs_tx_queue_release(txq);
> + return ret;
> +}
> +
> +static void
> +fs_dev_free_queues(struct rte_eth_dev *dev)
> +{
> + uint16_t i;
> +
> + for (i = 0; i < dev->data->nb_rx_queues; i++) {
> + fs_rx_queue_release(dev->data->rx_queues[i]);
> + dev->data->rx_queues[i] = NULL;
> + }
> + dev->data->nb_rx_queues = 0;
> + for (i = 0; i < dev->data->nb_tx_queues; i++) {
> + fs_tx_queue_release(dev->data->tx_queues[i]);
> + dev->data->tx_queues[i] = NULL;
> + }
> + dev->data->nb_tx_queues = 0;
> +}
> +
> +static void
> +fs_promiscuous_enable(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_promiscuous_enable(PORT_ID(sdev));
> +}
> +
> +static void
> +fs_promiscuous_disable(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_promiscuous_disable(PORT_ID(sdev));
> +}
> +
> +static void
> +fs_allmulticast_enable(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_allmulticast_enable(PORT_ID(sdev));
> +}
> +
> +static void
> +fs_allmulticast_disable(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_allmulticast_disable(PORT_ID(sdev));
> +}
> +
> +static int
> +fs_link_update(struct rte_eth_dev *dev,
> + int wait_to_complete)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling link_update on sub_device %d", i);
> + ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
> + if (ret && ret != -1) {
> + ERROR("Link update failed for sub_device %d with error %d",
> + i, ret);
> + return ret;
> + }
> + }
> + if (TX_SUBDEV(dev)) {
> + struct rte_eth_link *l1;
> + struct rte_eth_link *l2;
> +
> + l1 = &dev->data->dev_link;
> + l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
> + if (memcmp(l1, l2, sizeof(*l1))) {
> + *l1 = *l2;
> + return 0;
> + }
> + }
> + return -1;
> +}
> +
> +static void
> +fs_stats_get(struct rte_eth_dev *dev,
> + struct rte_eth_stats *stats)
> +{
> + memset(stats, 0, sizeof(*stats));
> + if (TX_SUBDEV(dev) == NULL)
> + return;
> + rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
> +}
> +
> +static void
> +fs_stats_reset(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_stats_reset(PORT_ID(sdev));
> +}
> +
> +/**
> + * Fail-safe dev_infos_get rules:
> + *
> + * No sub_device:
> + * Numerables:
> + * Use the maximum possible values for any field, so as not
> + * to impede any further configuration effort.
> + * Capabilities:
> + * Limits capabilities to those that are understood by the
> + * fail-safe PMD. This understanding stems from the fail-safe
> + * being capable of verifying that the related capability is
> + * expressed within the device configuration (struct rte_eth_conf).
> + *
> + * At least one probed sub_device:
> + * Numerables:
> + * Uses values from the active probed sub_device
> + * The rationale here is that if any sub_device is less capable
> + * (for example concerning the number of queues) than the active
> + * sub_device, then its subsequent configuration will fail.
> + * It is impossible to foresee this failure when the failing sub_device
> + * is supposed to be plugged-in later on, so the configuration process
> + * is the single point of failure and error reporting.
> + * Capabilities:
> + * Uses a logical AND of RX capabilities among
> + * all sub_devices and the default capabilities.
> + * Uses a logical AND of TX capabilities among
> + * the active probed sub_device and the default capabilities.
> + *
> + */
> +static void
> +fs_dev_infos_get(struct rte_eth_dev *dev,
> + struct rte_eth_dev_info *infos)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + sdev = TX_SUBDEV(dev);
> + if (sdev == NULL) {
> + DEBUG("No probed device, using default infos");
> + rte_memcpy(&PRIV(dev)->infos, &default_infos,
> + sizeof(default_infos));
> + } else {
> + uint32_t rx_offload_capa;
> +
> + rx_offload_capa = default_infos.rx_offload_capa;
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
> + rte_eth_dev_info_get(PORT_ID(sdev),
> + &PRIV(dev)->infos);
> + rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
> + }
> + sdev = TX_SUBDEV(dev);
> + rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
> + PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
> + PRIV(dev)->infos.tx_offload_capa &=
> + default_infos.tx_offload_capa;
> + PRIV(dev)->infos.flow_type_rss_offloads &=
> + default_infos.flow_type_rss_offloads;
> + }
> + rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
> +}
> +
> +static const uint32_t *
> +fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + struct rte_eth_dev *edev;
> +
> + sdev = TX_SUBDEV(dev);
> + if (sdev == NULL)
> + return NULL;
> + edev = ETH(sdev);
> + /* ENOTSUP: counts as no supported ptypes */
> + if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
> + return NULL;
> + /*
> + * The API does not permit to do a clean AND of all ptypes,
> + * It is also incomplete by design and we do not really care
> + * to have a best possible value in this context.
> + * We just return the ptypes of the device of highest
> + * priority, usually the PREFERRED device.
> + */
> + return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
> +}
> +
> +static int
> +fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
> + ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
> + if (ret) {
> + ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
> + " with error %d", i, ret);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static int
> +fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
> + ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
> + if (ret) {
> + ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
> + " with error %d", i, ret);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static int
> +fs_flow_ctrl_get(struct rte_eth_dev *dev,
> + struct rte_eth_fc_conf *fc_conf)
> +{
> + struct sub_device *sdev;
> +
> + sdev = TX_SUBDEV(dev);
> + if (sdev == NULL)
> + return 0;
> + if (SUBOPS(sdev, flow_ctrl_get) == NULL)
> + return -ENOTSUP;
> + return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
> +}
> +
> +static int
> +fs_flow_ctrl_set(struct rte_eth_dev *dev,
> + struct rte_eth_fc_conf *fc_conf)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
> + ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
> + if (ret) {
> + ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
> + " with error %d", i, ret);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static void
> +fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + /* No check: already done within the rte_eth_dev_mac_addr_remove
> + * call for the fail-safe device.
> + */
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
> + &dev->data->mac_addrs[index]);
> + PRIV(dev)->mac_addr_pool[index] = 0;
> +}
> +
> +static int
> +fs_mac_addr_add(struct rte_eth_dev *dev,
> + struct ether_addr *mac_addr,
> + uint32_t index,
> + uint32_t vmdq)
> +{
> + struct sub_device *sdev;
> + int ret;
> + uint8_t i;
> +
> + assert(index < FAILSAFE_MAX_ETHADDR);
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
> + if (ret) {
> + ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
> + PRIu8 " with error %d", i, ret);
> + return ret;
> + }
> + }
> + if (index >= PRIV(dev)->nb_mac_addr) {
> + DEBUG("Growing mac_addrs array");
> + PRIV(dev)->nb_mac_addr = index;
> + }
> + PRIV(dev)->mac_addr_pool[index] = vmdq;
> + return 0;
> +}
> +
> +static void
> +fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
> +{
> + struct sub_device *sdev;
> + uint8_t i;
> +
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> + rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
> +}
> +
> +const struct eth_dev_ops failsafe_ops = {
> + .dev_configure = fs_dev_configure,
> + .dev_start = fs_dev_start,
> + .dev_stop = fs_dev_stop,
> + .dev_set_link_down = fs_dev_set_link_down,
> + .dev_set_link_up = fs_dev_set_link_up,
> + .dev_close = fs_dev_close,
> + .promiscuous_enable = fs_promiscuous_enable,
> + .promiscuous_disable = fs_promiscuous_disable,
> + .allmulticast_enable = fs_allmulticast_enable,
> + .allmulticast_disable = fs_allmulticast_disable,
> + .link_update = fs_link_update,
> + .stats_get = fs_stats_get,
> + .stats_reset = fs_stats_reset,
> + .dev_infos_get = fs_dev_infos_get,
> + .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
> + .mtu_set = fs_mtu_set,
> + .vlan_filter_set = fs_vlan_filter_set,
> + .rx_queue_setup = fs_rx_queue_setup,
> + .tx_queue_setup = fs_tx_queue_setup,
> + .rx_queue_release = fs_rx_queue_release,
> + .tx_queue_release = fs_tx_queue_release,
> + .flow_ctrl_get = fs_flow_ctrl_get,
> + .flow_ctrl_set = fs_flow_ctrl_set,
> + .mac_addr_remove = fs_mac_addr_remove,
> + .mac_addr_add = fs_mac_addr_add,
> + .mac_addr_set = fs_mac_addr_set,
> +};
> diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
> new file mode 100644
> index 0000000..e7a7592
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_private.h
> @@ -0,0 +1,227 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
> +#define _RTE_ETH_FAILSAFE_PRIVATE_H_
> +
> +#include <rte_dev.h>
> +#include <rte_ethdev.h>
> +#include <rte_devargs.h>
> +
> +#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
> +
> +#define PMD_FAILSAFE_MAC_KVARG "mac"
> +#define PMD_FAILSAFE_PARAM_STRING \
> + "dev(<ifc>)," \
> + "mac=mac_addr" \
> + ""
> +
> +#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
> +
> +#define FAILSAFE_MAX_ETHPORTS 2
> +#define FAILSAFE_MAX_ETHADDR 128
> +
> +/* TYPES */
> +
> +struct rxq {
> + struct fs_priv *priv;
> + uint16_t qid;
> + /* id of last sub_device polled */
> + uint8_t last_polled;
> + unsigned int socket_id;
> + struct rte_eth_rxq_info info;
> +};
> +
> +struct txq {
> + struct fs_priv *priv;
> + uint16_t qid;
> + unsigned int socket_id;
> + struct rte_eth_txq_info info;
> +};
> +
> +enum dev_state {
> + DEV_UNDEFINED = 0,
> + DEV_PARSED,
> + DEV_PROBED,
> + DEV_ACTIVE,
> + DEV_STARTED,
> +};
> +
> +struct sub_device {
> + /* Exhaustive DPDK device description */
> + struct rte_devargs devargs;
> + struct rte_bus *bus;
> + struct rte_device *dev;
> + struct rte_eth_dev *edev;
> + /* Device state machine */
> + enum dev_state state;
> +};
> +
> +struct fs_priv {
> + struct rte_eth_dev *dev;
> + /*
> + * Set of sub_devices.
> + * subs[0] is the preferred device
> + * any other is just another slave
> + */
> + struct sub_device *subs;
> + uint8_t subs_head; /* if head == tail, no subs */
> + uint8_t subs_tail; /* first invalid */
> + uint8_t subs_tx; /* current emitting device */
> + uint8_t current_probed;
> + /* current number of mac_addr slots allocated. */
> + uint32_t nb_mac_addr;
> + struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
> + uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
> + /* current capabilities */
> + struct rte_eth_dev_info infos;
> +};
> +
> +/* RX / TX */
> +
> +uint16_t failsafe_rx_burst(void *rxq,
> + struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
> +uint16_t failsafe_tx_burst(void *txq,
> + struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
> +
> +/* ARGS */
> +
> +int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
> +void failsafe_args_free(struct rte_eth_dev *dev);
> +int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
> +
> +/* EAL */
> +
> +int failsafe_eal_init(struct rte_eth_dev *dev);
> +int failsafe_eal_uninit(struct rte_eth_dev *dev);
> +
> +/* GLOBALS */
> +
> +extern const char pmd_failsafe_driver_name[];
> +extern const struct eth_dev_ops failsafe_ops;
> +extern int mac_from_arg;
> +
> +/* HELPERS */
> +
> +/* dev: (struct rte_eth_dev *) fail-safe device */
> +#define PRIV(dev) \
> + ((struct fs_priv *)(dev)->data->dev_private)
> +
> +/* sdev: (struct sub_device *) */
> +#define ETH(sdev) \
> + ((sdev)->edev)
> +
> +/* sdev: (struct sub_device *) */
> +#define PORT_ID(sdev) \
> + (ETH(sdev)->data->port_id)
> +
> +/**
> + * Stateful iterator construct over fail-safe sub-devices:
> + * s: (struct sub_device *), iterator
> + * i: (uint8_t), increment
> + * dev: (struct rte_eth_dev *), fail-safe ethdev
> + * state: (enum dev_state), minimum acceptable device state
> + */
> +#define FOREACH_SUBDEV_ST(s, i, dev, state) \
> + for (i = fs_find_next((dev), 0, state); \
> + i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
> + i = fs_find_next((dev), i + 1, state))
> +
> +/**
> + * Iterator construct over fail-safe sub-devices:
> + * s: (struct sub_device *), iterator
> + * i: (uint8_t), increment
> + * dev: (struct rte_eth_dev *), fail-safe ethdev
> + */
> +#define FOREACH_SUBDEV(s, i, dev) \
> + FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
> +
> +/* dev: (struct rte_eth_dev *) fail-safe device */
> +#define PREFERRED_SUBDEV(dev) \
> + (&PRIV(dev)->subs[0])
> +
> +/* dev: (struct rte_eth_dev *) fail-safe device */
> +#define TX_SUBDEV(dev) \
> + (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
> + : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
> + : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
> +
> +/**
> + * s: (struct sub_device *)
> + * ops: (struct eth_dev_ops) member
> + */
> +#define SUBOPS(s, ops) \
> + (ETH(s)->dev_ops->ops)
> +
> +#ifndef NDEBUG
> +#include <stdio.h>
> +#define DEBUG__(m, ...) \
> + (fprintf(stderr, "%s:%d: %s(): " m "%c", \
> + __FILE__, __LINE__, __func__, __VA_ARGS__), \
> + (void)0)
> +#define DEBUG_(...) \
> + (errno = ((int []){ \
> + *(volatile int *)&errno, \
> + (DEBUG__(__VA_ARGS__), 0) \
> + })[0])
> +#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
> +#define INFO(...) DEBUG(__VA_ARGS__)
> +#define WARN(...) DEBUG(__VA_ARGS__)
> +#define ERROR(...) DEBUG(__VA_ARGS__)
> +#else
> +#define DEBUG(...) ((void)0)
> +#define LOG__(level, m, ...) \
> + RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
> +#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
> +#define INFO(...) LOG_(INFO, __VA_ARGS__)
> +#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
> +#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
> +#endif
> +
> +/* inlined functions */
> +
> +static inline uint8_t
> +fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
> + enum dev_state min_state)
> +{
> + while (sid < PRIV(dev)->subs_tail) {
> + if (PRIV(dev)->subs[sid].state >= min_state)
> + break;
> + sid++;
> + }
> + if (sid >= PRIV(dev)->subs_tail)
> + return PRIV(dev)->subs_tail;
> + return sid;
> +}
> +
> +#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
> diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
> new file mode 100644
> index 0000000..a45b4e5
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_rxtx.c
> @@ -0,0 +1,107 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright 2017 6WIND S.A.
> + * Copyright 2017 Mellanox.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of 6WIND S.A. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <rte_mbuf.h>
> +#include <rte_ethdev.h>
> +
> +#include "failsafe_private.h"
> +
> +/*
> + * TODO: write fast version,
> + * without additional checks, to be activated once
> + * everything has been verified to comply.
> + */
> +uint16_t
> +failsafe_rx_burst(void *queue,
> + struct rte_mbuf **rx_pkts,
> + uint16_t nb_pkts)
> +{
> + struct fs_priv *priv;
> + struct sub_device *sdev;
> + struct rxq *rxq;
> + void *sub_rxq;
> + uint16_t nb_rx;
> + uint8_t nb_polled, nb_subs;
> + uint8_t i;
> +
> + rxq = queue;
> + priv = rxq->priv;
> + nb_subs = priv->subs_tail - priv->subs_head;
> + nb_polled = 0;
> + for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
> + i++;
> + if (i == priv->subs_tail)
> + i = priv->subs_head;
> + sdev = &priv->subs[i];
> + if (unlikely(ETH(sdev) == NULL))
> + continue;
> + if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
> + continue;
> + if (unlikely(sdev->state != DEV_STARTED))
> + continue;
> + sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
> + nb_rx = ETH(sdev)->
> + rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
> + if (nb_rx) {
> + rxq->last_polled = i;
> + return nb_rx;
> + }
> + }
> + return 0;
> +}
> +
> +/*
> + * TODO: write fast version,
> + * without additional checks, to be activated once
> + * everything has been verified to comply.
> + */
> +uint16_t
> +failsafe_tx_burst(void *queue,
> + struct rte_mbuf **tx_pkts,
> + uint16_t nb_pkts)
> +{
> + struct sub_device *sdev;
> + struct txq *txq;
> + void *sub_txq;
> +
> + txq = queue;
> + sdev = TX_SUBDEV(txq->priv->dev);
> + if (unlikely(sdev == NULL))
> + return 0;
> + if (unlikely(ETH(sdev) == NULL))
> + return 0;
> + if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
> + return 0;
> + sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
> + return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
> +}
> diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
> new file mode 100644
> index 0000000..b6d2840
> --- /dev/null
> +++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
> @@ -0,0 +1,4 @@
> +DPDK_17.08 {
> +
> + local: *;
> +};
> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
> index dbd3614..d7581b7 100644
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -120,6 +120,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
> _LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
> _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
> _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
> _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
> _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
> ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
> --
> 2.1.4
>
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v7 03/11] net/failsafe: add fail-safe PMD
2017-07-09 11:10 ` Jan Blunck
@ 2017-07-09 12:35 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-09 12:35 UTC (permalink / raw)
To: Jan Blunck; +Cc: dev
On Sun, Jul 09, 2017 at 07:10:49AM -0400, Jan Blunck wrote:
> On Sat, Jul 8, 2017 at 9:47 PM, Gaetan Rivet <gaetan.rivet@6wind.com> wrote:
> > +static int
> > +fs_parse_device(struct sub_device *sdev, char *args)
> > +{
> > + struct rte_devargs *d;
> > + int ret;
> > +
> > + d = &sdev->devargs;
> > + DEBUG("%s", args);
> > + ret = rte_eal_devargs_parse(args, d);
> > + if (ret) {
> > + DEBUG("devargs parsing failed with code %d", ret);
> > + return ret;
> > + }
> > + sdev->bus = d->bus;
> > + sdev->state = DEV_PARSED;
>
> You seem to be mostly interested in the bus name for the device. Why
> don't you track this via your sub_device structure instead of using
> rte_devargs?
>
>
I don't understand. I track it in my sub_device structure by copying the
info from the devargs? How would you get it otherwise?
Devargs still has to be used as a common format that can be parsed
by EAL helpers. I could certainly parse it myself, but then I would have
to follow any evolution of the parameter format, and I prefer to
delegate this to the EAL.
> > + return 0;
> > +}
> > +
[...]
> > +static struct rte_eth_dev *
> > +fs_find_ethdev(const struct rte_device *dev)
> > +{
> > + struct rte_eth_dev *eth_dev;
> > + uint8_t i;
> > +
> > + RTE_ETH_FOREACH_DEV(i) {
> > + eth_dev = &rte_eth_devices[i];
> > + if (eth_dev->device == dev)
> > + return eth_dev;
> > + }
> > + return NULL;
> > +}
>
> Why don't you use rte_eth_dev_allocated() here?
>
>
IIRC, at the time I choose to roll out my own version, there was
ambiguities about device names availability, with some devices using
their rte_devargs name, others writing their own.
It has been stabilized it seems, and now I think rte_eth_dev_allocated
could be used.
[...]
> > +
> > +static int
> > +fs_bus_init(struct rte_eth_dev *dev)
> > +{
> > + struct sub_device *sdev;
> > + struct rte_device *rdev;
> > + struct rte_devargs *da;
> > + uint8_t i;
> > + int ret;
> > +
> > + FOREACH_SUBDEV(sdev, i, dev) {
> > + if (sdev->state != DEV_PARSED)
> > + continue;
> > + da = &sdev->devargs;
> > + rdev = rte_eal_hotplug_add(da->bus->name,
> > + da->name,
> > + da->args);
>
> Why don't you track the bus name through your sub_device structure instead?
>
>
Do you mean
+ rdev = rte_eal_hotplug_add(sdev->bus->name,
+ da->name,
+ da->args);
instead? I guess for this example it was mostly for the sake of
consistency, but the bus handle within the sub_device could be
used.
Actually I dislike having a copy of an info. I have this info both
within the sub_device directly and within the rte_devargs within the
sub_device. It should be streamlined.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v7 03/11] net/failsafe: add fail-safe PMD
2017-07-09 1:47 ` [PATCH v7 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-07-09 11:10 ` Jan Blunck
@ 2017-07-09 15:02 ` Thomas Monjalon
1 sibling, 0 replies; 195+ messages in thread
From: Thomas Monjalon @ 2017-07-09 15:02 UTC (permalink / raw)
To: Gaetan Rivet; +Cc: dev
09/07/2017 03:47, Gaetan Rivet:
> +#. Start testpmd
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
> + --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
> + -i
It cannot work because rte_pci_scan is disabled with --no-pci.
The PCI device will be unknown when adding it as slave of failsafe.
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v7 04/11] net/failsafe: add plug-in support
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (2 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 05/11] net/failsafe: add flexible device definition Gaetan Rivet
` (7 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 32 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 423 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 056f85f..c04891a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -102,6 +102,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -131,3 +136,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index c759035..e27bfc0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7cf33e8..888f07b 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -80,6 +80,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -128,6 +194,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index f07d26e..8f334aa 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -45,9 +45,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +223,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +272,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +295,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +318,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 6c3a811..16871df 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -88,37 +88,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -150,5 +127,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 693162e..4044473 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index e7a7592..8fb72fe 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -224,4 +245,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 05/11] net/failsafe: add flexible device definition
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (3 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 04/11] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 06/11] net/failsafe: support flow API Gaetan Rivet
` (6 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 99 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 130 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index c04891a..1b6e110 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -91,6 +91,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -126,6 +139,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
--vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
-i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 8f334aa..c723ca3 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -30,6 +30,8 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
+#include <assert.h>
#include <string.h>
#include <errno.h>
@@ -96,6 +98,75 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ assert(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ char *new_str;
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ new_str = rte_realloc(sdev->cmdline, len,
+ RTE_CACHE_LINE_SIZE);
+ if (new_str == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ sdev->cmdline = new_str;
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -130,6 +201,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -331,6 +410,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -361,3 +442,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8fb72fe..554d7a3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 06/11] net/failsafe: support flow API
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (4 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 07/11] net/failsafe: support offload capabilities Gaetan Rivet
` (5 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 216 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 337 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index e27bfc0..3cccfe0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 888f07b..6557255 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -177,6 +177,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 16871df..86e16a6 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -78,6 +78,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..d8f59a1
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4044473..4cb2e90 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -628,6 +629,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -655,4 +683,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 554d7a3..f40ea2f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 07/11] net/failsafe: support offload capabilities
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (5 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 08/11] net/failsafe: add fast burst functions Gaetan Rivet
` (4 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4cb2e90..5fb0135 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 08/11] net/failsafe: add fast burst functions
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (6 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 07/11] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 09/11] net/failsafe: support device removal Gaetan Rivet
` (3 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 124 ++++++++++++++++++++++++++------
2 files changed, 112 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index f40ea2f..25a4dac 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -299,6 +306,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..c15025f 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,63 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
+
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +110,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +123,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ assert(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +168,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ assert(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 09/11] net/failsafe: support device removal
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (7 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 08/11] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 10/11] net/failsafe: support link status change event Gaetan Rivet
` (2 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 38 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 1b6e110..4154f0a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation options
@@ -170,3 +176,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 6557255..4d35860 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -132,6 +132,7 @@ fs_hotplug_alarm(void *arg)
if (!PRIV(dev)->pending_alarm)
return;
PRIV(dev)->pending_alarm = 0;
+ failsafe_dev_remove(dev);
FOREACH_SUBDEV(sdev, i, dev)
if (sdev->state != PRIV(dev)->state)
break;
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index c723ca3..dd55aaf 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -443,6 +443,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -455,6 +466,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 86e16a6..3321dda 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -79,6 +79,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -96,7 +97,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5fb0135..2e1c798 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -33,6 +33,8 @@
#include <assert.h>
#include <stdint.h>
+
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 25a4dac..6a8041d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#ifndef NDEBUG
#include <stdio.h>
#define DEBUG__(m, ...) \
@@ -274,33 +318,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index c15025f..82a8c4e 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -33,6 +33,7 @@
#include <assert.h>
+#include <rte_atomic.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -113,8 +114,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -147,8 +150,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
assert(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -165,13 +170,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -182,10 +191,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
assert(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 10/11] net/failsafe: support link status change event
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (8 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 09/11] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-09 1:47 ` [PATCH v7 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 4d35860..151f823 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -240,6 +240,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2e1c798..05221bc 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6a8041d..6b34998 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v7 11/11] net/failsafe: support flow API isolation mode
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (9 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 10/11] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-09 1:47 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-09 1:47 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index d8f59a1..a5598ae 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -207,10 +207,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6b34998..a071ad9 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 00/11] introduce fail-safe PMD
2017-07-09 1:47 ` [PATCH v7 00/11] " Gaetan Rivet
` (10 preceding siblings ...)
2017-07-09 1:47 ` [PATCH v7 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
` (11 more replies)
11 siblings, 12 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This PMD intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back so that
existing applications do not need to be modified to benefit from true
hot-plugging support.
The stacked PMD approach shares many similarities with the bonding PMD but
with a different purpose. While bonding provides the ability to group
several links into a single logical device for enhanced throughput and
supports fail-over at link level, this one manages the sudden disappearance
of the underlying device; it guarantees applications face a valid device in
working order at all times.
Each fail-safe instance is configured to run atop one or several
devices, with one defined as the preferred device. Hot-plug events are
handled on all of them, and Tx is always directed to the preferred device
if present or to the next available failover device (Rx is always performed
on all devices for simplicity).
Moreover, the configured slaves (preferred or failover) do not need to be
present at initialization time and may appear later.
Slaves configuration is continuously synchronized with that of the virtual
device, which exposes their common set of capabilities to the application.
Failure to apply the current configuration state to a slave for any reason
simply reschedules its initialization.
This patchset depends on:
eal: complete attach / detach support
http://dpdk.org/ml/archives/dev/2017-May/066366.html
http://dpdk.org/dev/patchwork/patch/24522/
ethdev: add flow API rule copy function
http://dpdk.org/ml/archives/dev/2017-May/066145.html
http://dpdk.org/dev/patchwork/patch/24406/
ethdev: add isolated mode to flow API
http://dpdk.org/ml/archives/dev/2017-April/064327.html
http://dpdk.org/dev/patchwork/patch/23741/
v1 --> v2:
- Wrote documentation
- Fixed commit logs, signed-off-by
- Added LSC event support
- A few minor fixes
v2 --> v3:
- Numerous bug fixes.
- Complete sub-EAL rework to follow new bus API.
- burst protection on sub removal.
- more flexible sub definition.
- flow isolated mode support.
v3 --> v4:
- Split back commits
net/failsafe: add fast burst functions
net/failsafe: support device removal
That were squashed by error during a rebase
- Fix segfault on port plugin
- Fix isolate mode support for MLX4 ports plugin
v4 --> v5:
- Follow new plug / unplug API.
v5 --> v6:
- Follow new hotplug API.
- Improve usability of hotplug API.
- Fix rte_dev hotplug API implementation.
- Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
- Use it to clean up resources on hotplug_remove.
- Fix hotplug implementation and support un pci bus.
The scan was not idempotent, nor clean.
Neither were the device fields.
- Implement plug operation for vdev bus.
This is needed for hotplug support and to make the EAL
independent from vdev-specific API.
- Remove useless parameters from plug / unplug API.
This patchset is fairly big and complex. The hotplug API has been rushed and
has never been tested outside of the special case of vdev bus.
These evolutions are proposed alongside this PMD as only this PMD allows to test
this API at the moment, and without those evolutions this PMD cannot be used.
v6 --> v7
- Split the series in three, with
vlan filter configuration store standing alone
Hotplug API fixes separated
Fail-safe PMD on its own.
These changes should ease integration.
v7 --> v8
- Fix usage examples in documentation.
- Use rte_eth_dev_allocated when relevant.
Gaetan Rivet (11):
ethdev: add deferred intermediate device state
ethdev: count devices consistently
net/failsafe: add fail-safe PMD
net/failsafe: add plug-in support
net/failsafe: add flexible device definition
net/failsafe: support flow API
net/failsafe: support offload capabilities
net/failsafe: add fast burst functions
net/failsafe: support device removal
net/failsafe: support link status change event
net/failsafe: support flow API isolation mode
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 199 +++++
doc/guides/nics/features/failsafe.ini | 32 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 78 ++
drivers/net/failsafe/failsafe.c | 305 ++++++++
drivers/net/failsafe/failsafe_args.c | 475 ++++++++++++
drivers/net/failsafe/failsafe_eal.c | 118 +++
drivers/net/failsafe/failsafe_ether.c | 437 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 245 ++++++
drivers/net/failsafe/failsafe_ops.c | 869 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 376 ++++++++++
drivers/net/failsafe/failsafe_rxtx.c | 204 +++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
lib/librte_ether/rte_ethdev.c | 19 +-
lib/librte_ether/rte_ethdev.h | 14 +-
mk/rte.app.mk | 1 +
19 files changed, 3375 insertions(+), 15 deletions(-)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ether.c
create mode 100644 drivers/net/failsafe/failsafe_flow.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
--
2.1.4
^ permalink raw reply [flat|nested] 195+ messages in thread* [PATCH v8 01/11] ethdev: add deferred intermediate device state
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 02/11] ethdev: count devices consistently Gaetan Rivet
` (10 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 76179fd..69896e9 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index fd6baf3..2adef76 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1607,6 +1607,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 02/11] ethdev: count devices consistently
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
` (9 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 69896e9..8f41a68 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 2adef76..a744ba7 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1742,13 +1742,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 03/11] net/failsafe: add fail-safe PMD
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 02/11] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-11 19:57 ` Thomas Monjalon
2017-07-10 23:19 ` [PATCH v8 04/11] net/failsafe: add plug-in support Gaetan Rivet
` (8 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 146 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 76 +++
drivers/net/failsafe/failsafe.c | 231 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 138 +++++
drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 227 ++++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1962 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 804ac04..2adaa1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -336,6 +336,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 8ae6e92..9720b67 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..3b36eee
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,146 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to any ``-w`` device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd. The slave device should be blacklisted from normal EAL
+ operations to avoid probing it twice when in PCI blacklist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -b 84:00.0 -b 00:04.0 -- -i
+
+ Note that PCI blacklist mode is the default PCI operating mode. In this
+ configuration, the fail-safe cannot proceed with its slaves if they have
+ been probed beforehand.
+
+#. Alternatively, it can be used alongside any other device in whitelist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -w 81:00.0 -- -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..c759035
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..7cf33e8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..f07d26e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <errno.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..f4bd777
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,138 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ ret = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ rte_errno ? "(" : "",
+ rte_errno ? strerror(rte_errno) : "",
+ rte_errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = rte_eth_dev_allocated(da->name);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..693162e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..e7a7592
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index e239581..cdcd778 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -121,6 +121,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v8 03/11] net/failsafe: add fail-safe PMD
2017-07-10 23:19 ` [PATCH v8 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-11 19:57 ` Thomas Monjalon
2017-07-11 21:48 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Thomas Monjalon @ 2017-07-11 19:57 UTC (permalink / raw)
To: Gaetan Rivet; +Cc: dev
11/07/2017 01:19, Gaetan Rivet:
> --- /dev/null
> +++ b/drivers/net/failsafe/failsafe_args.c
[...]
> +#include <errno.h>
Do you really need errno in this file?
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v8 03/11] net/failsafe: add fail-safe PMD
2017-07-11 19:57 ` Thomas Monjalon
@ 2017-07-11 21:48 ` Gaëtan Rivet
2017-07-11 22:21 ` Thomas Monjalon
0 siblings, 1 reply; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-11 21:48 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Tue, Jul 11, 2017 at 09:57:51PM +0200, Thomas Monjalon wrote:
> 11/07/2017 01:19, Gaetan Rivet:
> > --- /dev/null
> > +++ b/drivers/net/failsafe/failsafe_args.c
> [...]
> > +#include <errno.h>
>
> Do you really need errno in this file?
It's used for error handling on strtoull and popen.
Why, is it a problem to include errno.h?
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v8 03/11] net/failsafe: add fail-safe PMD
2017-07-11 21:48 ` Gaëtan Rivet
@ 2017-07-11 22:21 ` Thomas Monjalon
2017-07-11 22:25 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Thomas Monjalon @ 2017-07-11 22:21 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: dev
11/07/2017 23:48, Gaëtan Rivet:
> On Tue, Jul 11, 2017 at 09:57:51PM +0200, Thomas Monjalon wrote:
> > 11/07/2017 01:19, Gaetan Rivet:
> > > --- /dev/null
> > > +++ b/drivers/net/failsafe/failsafe_args.c
> > [...]
> > > +#include <errno.h>
> >
> > Do you really need errno in this file?
>
> It's used for error handling on strtoull and popen.
> Why, is it a problem to include errno.h?
I don't see errno used in this patch.
I think it is used in next patches.
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v8 03/11] net/failsafe: add fail-safe PMD
2017-07-11 22:21 ` Thomas Monjalon
@ 2017-07-11 22:25 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-11 22:25 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Wed, Jul 12, 2017 at 12:21:24AM +0200, Thomas Monjalon wrote:
> 11/07/2017 23:48, Gaëtan Rivet:
> > On Tue, Jul 11, 2017 at 09:57:51PM +0200, Thomas Monjalon wrote:
> > > 11/07/2017 01:19, Gaetan Rivet:
> > > > --- /dev/null
> > > > +++ b/drivers/net/failsafe/failsafe_args.c
> > > [...]
> > > > +#include <errno.h>
> > >
> > > Do you really need errno in this file?
> >
> > It's used for error handling on strtoull and popen.
> > Why, is it a problem to include errno.h?
>
> I don't see errno used in this patch.
> I think it is used in next patches.
Ah, yes, you're right, sorry.
Will fix, thanks.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v8 04/11] net/failsafe: add plug-in support
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (2 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 05/11] net/failsafe: add flexible device definition Gaetan Rivet
` (7 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 32 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 423 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 3b36eee..bbee1c2 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -102,6 +102,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -144,3 +149,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index c759035..e27bfc0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7cf33e8..888f07b 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -80,6 +80,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -128,6 +194,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index f07d26e..8f334aa 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -45,9 +45,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +223,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +272,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +295,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +318,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index f4bd777..1bab3fc 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -72,37 +72,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -134,5 +111,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 693162e..4044473 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index e7a7592..8fb72fe 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -224,4 +245,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 05/11] net/failsafe: add flexible device definition
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (3 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 04/11] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 06/11] net/failsafe: support flow API Gaetan Rivet
` (6 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 99 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 130 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index bbee1c2..901b3cb 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -91,6 +91,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -139,6 +152,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
-w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
-w 81:00.0 -- -i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 8f334aa..c723ca3 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -30,6 +30,8 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
+#include <assert.h>
#include <string.h>
#include <errno.h>
@@ -96,6 +98,75 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ assert(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ char *new_str;
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ new_str = rte_realloc(sdev->cmdline, len,
+ RTE_CACHE_LINE_SIZE);
+ if (new_str == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ sdev->cmdline = new_str;
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -130,6 +201,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -331,6 +410,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -361,3 +442,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8fb72fe..554d7a3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 06/11] net/failsafe: support flow API
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (4 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 07/11] net/failsafe: support offload capabilities Gaetan Rivet
` (5 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 216 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 337 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index e27bfc0..3cccfe0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 888f07b..6557255 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -177,6 +177,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 1bab3fc..31257b0 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -62,6 +62,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..d8f59a1
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4044473..4cb2e90 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -628,6 +629,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -655,4 +683,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 554d7a3..f40ea2f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 07/11] net/failsafe: support offload capabilities
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (5 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 08/11] net/failsafe: add fast burst functions Gaetan Rivet
` (4 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4cb2e90..5fb0135 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 08/11] net/failsafe: add fast burst functions
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (6 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 07/11] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 09/11] net/failsafe: support device removal Gaetan Rivet
` (3 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 124 ++++++++++++++++++++++++++------
2 files changed, 112 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index f40ea2f..25a4dac 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -299,6 +306,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..c15025f 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,63 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
+
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +110,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +123,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ assert(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +168,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ assert(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 09/11] net/failsafe: support device removal
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (7 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 08/11] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 10/11] net/failsafe: support link status change event Gaetan Rivet
` (2 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 38 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 901b3cb..2ad8f3e 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation options
@@ -183,3 +189,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 6557255..4d35860 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -132,6 +132,7 @@ fs_hotplug_alarm(void *arg)
if (!PRIV(dev)->pending_alarm)
return;
PRIV(dev)->pending_alarm = 0;
+ failsafe_dev_remove(dev);
FOREACH_SUBDEV(sdev, i, dev)
if (sdev->state != PRIV(dev)->state)
break;
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index c723ca3..dd55aaf 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -443,6 +443,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -455,6 +466,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 31257b0..d0954d9 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -63,6 +63,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -80,7 +81,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5fb0135..2e1c798 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -33,6 +33,8 @@
#include <assert.h>
#include <stdint.h>
+
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 25a4dac..6a8041d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#ifndef NDEBUG
#include <stdio.h>
#define DEBUG__(m, ...) \
@@ -274,33 +318,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index c15025f..82a8c4e 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -33,6 +33,7 @@
#include <assert.h>
+#include <rte_atomic.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -113,8 +114,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -147,8 +150,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
assert(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -165,13 +170,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -182,10 +191,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
assert(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 10/11] net/failsafe: support link status change event
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (8 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 09/11] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-10 23:19 ` [PATCH v8 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 4d35860..151f823 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -240,6 +240,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2e1c798..05221bc 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6a8041d..6b34998 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v8 11/11] net/failsafe: support flow API isolation mode
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (9 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 10/11] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-10 23:19 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-10 23:19 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index d8f59a1..a5598ae 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -207,10 +207,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6b34998..a071ad9 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 00/11] introduce fail-safe PMD
2017-07-10 23:19 ` [PATCH v8 00/11] introduce fail-safe PMD Gaetan Rivet
` (10 preceding siblings ...)
2017-07-10 23:19 ` [PATCH v8 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
` (11 more replies)
11 siblings, 12 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This PMD intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back so that
existing applications do not need to be modified to benefit from true
hot-plugging support.
The stacked PMD approach shares many similarities with the bonding PMD but
with a different purpose. While bonding provides the ability to group
several links into a single logical device for enhanced throughput and
supports fail-over at link level, this one manages the sudden disappearance
of the underlying device; it guarantees applications face a valid device in
working order at all times.
Each fail-safe instance is configured to run atop one or several
devices, with one defined as the preferred device. Hot-plug events are
handled on all of them, and Tx is always directed to the preferred device
if present or to the next available failover device (Rx is always performed
on all devices for simplicity).
Moreover, the configured slaves (preferred or failover) do not need to be
present at initialization time and may appear later.
Slaves configuration is continuously synchronized with that of the virtual
device, which exposes their common set of capabilities to the application.
Failure to apply the current configuration state to a slave for any reason
simply reschedules its initialization.
This patchset depends on:
eal: complete attach / detach support
http://dpdk.org/ml/archives/dev/2017-May/066366.html
http://dpdk.org/dev/patchwork/patch/24522/
ethdev: add flow API rule copy function
http://dpdk.org/ml/archives/dev/2017-May/066145.html
http://dpdk.org/dev/patchwork/patch/24406/
ethdev: add isolated mode to flow API
http://dpdk.org/ml/archives/dev/2017-April/064327.html
http://dpdk.org/dev/patchwork/patch/23741/
v1 --> v2:
- Wrote documentation
- Fixed commit logs, signed-off-by
- Added LSC event support
- A few minor fixes
v2 --> v3:
- Numerous bug fixes.
- Complete sub-EAL rework to follow new bus API.
- burst protection on sub removal.
- more flexible sub definition.
- flow isolated mode support.
v3 --> v4:
- Split back commits
net/failsafe: add fast burst functions
net/failsafe: support device removal
That were squashed by error during a rebase
- Fix segfault on port plugin
- Fix isolate mode support for MLX4 ports plugin
v4 --> v5:
- Follow new plug / unplug API.
v5 --> v6:
- Follow new hotplug API.
- Improve usability of hotplug API.
- Fix rte_dev hotplug API implementation.
- Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
- Use it to clean up resources on hotplug_remove.
- Fix hotplug implementation and support un pci bus.
The scan was not idempotent, nor clean.
Neither were the device fields.
- Implement plug operation for vdev bus.
This is needed for hotplug support and to make the EAL
independent from vdev-specific API.
- Remove useless parameters from plug / unplug API.
This patchset is fairly big and complex. The hotplug API has been rushed and
has never been tested outside of the special case of vdev bus.
These evolutions are proposed alongside this PMD as only this PMD allows to test
this API at the moment, and without those evolutions this PMD cannot be used.
v6 --> v7
- Split the series in three, with
vlan filter configuration store standing alone
Hotplug API fixes separated
Fail-safe PMD on its own.
These changes should ease integration.
v7 --> v8
- Fix usage examples in documentation.
- Use rte_eth_dev_allocated when relevant.
v8 --> v9
- Use calloc instead of rte_realloc for command line parsing.
- Include errno only when necessary.
Gaetan Rivet (11):
ethdev: add deferred intermediate device state
ethdev: count devices consistently
net/failsafe: add fail-safe PMD
net/failsafe: add plug-in support
net/failsafe: add flexible device definition
net/failsafe: support flow API
net/failsafe: support offload capabilities
net/failsafe: add fast burst functions
net/failsafe: support device removal
net/failsafe: support link status change event
net/failsafe: support flow API isolation mode
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 199 +++++
doc/guides/nics/features/failsafe.ini | 32 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 78 ++
drivers/net/failsafe/failsafe.c | 305 ++++++++
drivers/net/failsafe/failsafe_args.c | 472 ++++++++++++
drivers/net/failsafe/failsafe_eal.c | 118 +++
drivers/net/failsafe/failsafe_ether.c | 437 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 245 ++++++
drivers/net/failsafe/failsafe_ops.c | 869 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 376 ++++++++++
drivers/net/failsafe/failsafe_rxtx.c | 204 +++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
lib/librte_ether/rte_ethdev.c | 19 +-
lib/librte_ether/rte_ethdev.h | 14 +-
mk/rte.app.mk | 1 +
19 files changed, 3372 insertions(+), 15 deletions(-)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ether.c
create mode 100644 drivers/net/failsafe/failsafe_flow.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
--
2.1.4
^ permalink raw reply [flat|nested] 195+ messages in thread* [PATCH v9 01/11] ethdev: add deferred intermediate device state
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 02/11] ethdev: count devices consistently Gaetan Rivet
` (10 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 76179fd..69896e9 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index fd6baf3..2adef76 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1607,6 +1607,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 02/11] ethdev: count devices consistently
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
` (9 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 69896e9..8f41a68 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 2adef76..a744ba7 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1742,13 +1742,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 03/11] net/failsafe: add fail-safe PMD
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 02/11] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-13 7:43 ` Thomas Monjalon
2017-07-11 23:26 ` [PATCH v9 04/11] net/failsafe: add plug-in support Gaetan Rivet
` (8 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 6 +
doc/guides/nics/fail_safe.rst | 146 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 76 +++
drivers/net/failsafe/failsafe.c | 231 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 138 +++++
drivers/net/failsafe/failsafe_ops.c | 663 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 227 ++++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1962 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 804ac04..2adaa1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -336,6 +336,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 8ae6e92..9720b67 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..3b36eee
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,146 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to any ``-w`` device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd. The slave device should be blacklisted from normal EAL
+ operations to avoid probing it twice when in PCI blacklist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -b 84:00.0 -b 00:04.0 -- -i
+
+ Note that PCI blacklist mode is the default PCI operating mode. In this
+ configuration, the fail-safe cannot proceed with its slaves if they have
+ been probed beforehand.
+
+#. Alternatively, it can be used alongside any other device in whitelist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -w 81:00.0 -- -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..c759035
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..7cf33e8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..79e5bfa
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..f4bd777
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,138 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ ret = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ rte_errno ? "(" : "",
+ rte_errno ? strerror(rte_errno) : "",
+ rte_errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = rte_eth_dev_allocated(da->name);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..693162e
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..e7a7592
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 5bb4290..c25fdd9 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -121,6 +121,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 04/11] net/failsafe: add plug-in support
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (2 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 05/11] net/failsafe: add flexible device definition Gaetan Rivet
` (7 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 33 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 424 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 3b36eee..bbee1c2 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -102,6 +102,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -144,3 +149,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index c759035..e27bfc0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7cf33e8..888f07b 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -80,6 +80,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -128,6 +194,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 79e5bfa..2e60442 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -32,6 +32,7 @@
*/
#include <string.h>
+#include <errno.h>
#include <rte_devargs.h>
#include <rte_malloc.h>
@@ -45,9 +46,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +224,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +273,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +296,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +319,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index f4bd777..1bab3fc 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -72,37 +72,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -134,5 +111,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 693162e..4044473 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index e7a7592..8fb72fe 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -224,4 +245,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 05/11] net/failsafe: add flexible device definition
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (3 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 04/11] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 06/11] net/failsafe: support flow API Gaetan Rivet
` (6 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 95 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 126 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index bbee1c2..901b3cb 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -91,6 +91,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -139,6 +152,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
-w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
-w 81:00.0 -- -i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 2e60442..2f400f8 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -31,6 +31,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
#include <string.h>
#include <errno.h>
@@ -97,6 +98,72 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ assert(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ sdev->cmdline = calloc(1, len);
+ if (sdev->cmdline == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -131,6 +198,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -332,6 +407,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -362,3 +439,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8fb72fe..554d7a3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 06/11] net/failsafe: support flow API
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (4 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 07/11] net/failsafe: support offload capabilities Gaetan Rivet
` (5 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 216 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 337 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index e27bfc0..3cccfe0 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 888f07b..6557255 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -177,6 +177,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 1bab3fc..31257b0 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -62,6 +62,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..d8f59a1
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,216 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free((*flow)->fd);
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ rte_free(flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4044473..4cb2e90 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -35,6 +35,7 @@
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -628,6 +629,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -655,4 +683,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 554d7a3..f40ea2f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 07/11] net/failsafe: support offload capabilities
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (5 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 08/11] net/failsafe: add fast burst functions Gaetan Rivet
` (4 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 4cb2e90..5fb0135 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 08/11] net/failsafe: add fast burst functions
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (6 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 07/11] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 09/11] net/failsafe: support device removal Gaetan Rivet
` (3 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 124 ++++++++++++++++++++++++++------
2 files changed, 112 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index f40ea2f..25a4dac 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -299,6 +306,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..c15025f 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,63 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <assert.h>
+
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +110,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +123,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ assert(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +168,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ assert(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 09/11] net/failsafe: support device removal
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (7 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 08/11] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 10/11] net/failsafe: support link status change event Gaetan Rivet
` (2 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 38 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 901b3cb..2ad8f3e 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation options
@@ -183,3 +189,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 6557255..4d35860 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -132,6 +132,7 @@ fs_hotplug_alarm(void *arg)
if (!PRIV(dev)->pending_alarm)
return;
PRIV(dev)->pending_alarm = 0;
+ failsafe_dev_remove(dev);
FOREACH_SUBDEV(sdev, i, dev)
if (sdev->state != PRIV(dev)->state)
break;
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 2f400f8..fea299a 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -440,6 +440,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -452,6 +463,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 31257b0..d0954d9 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -63,6 +63,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -80,7 +81,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 5fb0135..2e1c798 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -33,6 +33,8 @@
#include <assert.h>
#include <stdint.h>
+
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 25a4dac..6a8041d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#ifndef NDEBUG
#include <stdio.h>
#define DEBUG__(m, ...) \
@@ -274,33 +318,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index c15025f..82a8c4e 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -33,6 +33,7 @@
#include <assert.h>
+#include <rte_atomic.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -113,8 +114,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -147,8 +150,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
assert(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -165,13 +170,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -182,10 +191,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
assert(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 10/11] net/failsafe: support link status change event
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (8 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 09/11] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-11 23:26 ` [PATCH v9 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 4d35860..151f823 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -240,6 +240,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2e1c798..05221bc 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6a8041d..6b34998 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v9 11/11] net/failsafe: support flow API isolation mode
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (9 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 10/11] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-11 23:26 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-11 23:26 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index d8f59a1..a5598ae 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -207,10 +207,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 6b34998..a071ad9 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 00/11] introduce fail-safe PMD
2017-07-11 23:26 ` [PATCH v9 00/11] introduce fail-safe PMD Gaetan Rivet
` (10 preceding siblings ...)
2017-07-11 23:26 ` [PATCH v9 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
` (11 more replies)
11 siblings, 12 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This PMD intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back so that
existing applications do not need to be modified to benefit from true
hot-plugging support.
The stacked PMD approach shares many similarities with the bonding PMD but
with a different purpose. While bonding provides the ability to group
several links into a single logical device for enhanced throughput and
supports fail-over at link level, this one manages the sudden disappearance
of the underlying device; it guarantees applications face a valid device in
working order at all times.
Each fail-safe instance is configured to run atop one or several
devices, with one defined as the preferred device. Hot-plug events are
handled on all of them, and Tx is always directed to the preferred device
if present or to the next available failover device (Rx is always performed
on all devices for simplicity).
Moreover, the configured slaves (preferred or failover) do not need to be
present at initialization time and may appear later.
Slaves configuration is continuously synchronized with that of the virtual
device, which exposes their common set of capabilities to the application.
Failure to apply the current configuration state to a slave for any reason
simply reschedules its initialization.
This patchset depends on:
eal: complete attach / detach support
http://dpdk.org/ml/archives/dev/2017-May/066366.html
http://dpdk.org/dev/patchwork/patch/24522/
ethdev: add flow API rule copy function
http://dpdk.org/ml/archives/dev/2017-May/066145.html
http://dpdk.org/dev/patchwork/patch/24406/
ethdev: add isolated mode to flow API
http://dpdk.org/ml/archives/dev/2017-April/064327.html
http://dpdk.org/dev/patchwork/patch/23741/
v1 --> v2:
- Wrote documentation
- Fixed commit logs, signed-off-by
- Added LSC event support
- A few minor fixes
v2 --> v3:
- Numerous bug fixes.
- Complete sub-EAL rework to follow new bus API.
- burst protection on sub removal.
- more flexible sub definition.
- flow isolated mode support.
v3 --> v4:
- Split back commits
net/failsafe: add fast burst functions
net/failsafe: support device removal
That were squashed by error during a rebase
- Fix segfault on port plugin
- Fix isolate mode support for MLX4 ports plugin
v4 --> v5:
- Follow new plug / unplug API.
v5 --> v6:
- Follow new hotplug API.
- Improve usability of hotplug API.
- Fix rte_dev hotplug API implementation.
- Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
- Use it to clean up resources on hotplug_remove.
- Fix hotplug implementation and support un pci bus.
The scan was not idempotent, nor clean.
Neither were the device fields.
- Implement plug operation for vdev bus.
This is needed for hotplug support and to make the EAL
independent from vdev-specific API.
- Remove useless parameters from plug / unplug API.
This patchset is fairly big and complex. The hotplug API has been rushed and
has never been tested outside of the special case of vdev bus.
These evolutions are proposed alongside this PMD as only this PMD allows to test
this API at the moment, and without those evolutions this PMD cannot be used.
v6 --> v7
- Split the series in three, with
vlan filter configuration store standing alone
Hotplug API fixes separated
Fail-safe PMD on its own.
These changes should ease integration.
v7 --> v8
- Fix usage examples in documentation.
- Use rte_eth_dev_allocated when relevant.
v8 --> v9
- Use calloc instead of rte_realloc for command line parsing.
- Include errno only when necessary.
v9 --> v10
- Fix rte_flow description double-free issue.
Thanks Raslan for finding the issue :)
- Use RTE_ASSERT instead of assert.
Integrate the debug log of the fail-safe to
RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
- Remove devices post-state-sync during slave upkeep,
to avoid a useless early probe attempt.
Gaetan Rivet (11):
ethdev: add deferred intermediate device state
ethdev: count devices consistently
net/failsafe: add fail-safe PMD
net/failsafe: add plug-in support
net/failsafe: add flexible device definition
net/failsafe: support flow API
net/failsafe: support offload capabilities
net/failsafe: add fast burst functions
net/failsafe: support device removal
net/failsafe: support link status change event
net/failsafe: support flow API isolation mode
MAINTAINERS | 5 +
config/common_base | 5 +
doc/guides/nics/fail_safe.rst | 195 +++++
doc/guides/nics/features/failsafe.ini | 32 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 68 ++
drivers/net/failsafe/failsafe.c | 306 ++++++++
drivers/net/failsafe/failsafe_args.c | 472 ++++++++++++
drivers/net/failsafe/failsafe_eal.c | 118 +++
drivers/net/failsafe/failsafe_ether.c | 437 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 244 ++++++
drivers/net/failsafe/failsafe_ops.c | 869 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 359 +++++++++
drivers/net/failsafe/failsafe_rxtx.c | 203 +++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
lib/librte_ether/rte_ethdev.c | 19 +-
lib/librte_ether/rte_ethdev.h | 14 +-
mk/rte.app.mk | 1 +
19 files changed, 3339 insertions(+), 15 deletions(-)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ether.c
create mode 100644 drivers/net/failsafe/failsafe_flow.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
--
2.1.4
^ permalink raw reply [flat|nested] 195+ messages in thread* [PATCH v10 01/11] ethdev: add deferred intermediate device state
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 02/11] ethdev: count devices consistently Gaetan Rivet
` (10 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a1b7447..81b398d 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index f683727..774408c 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1613,6 +1613,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 02/11] ethdev: count devices consistently
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-17 13:58 ` Ferruh Yigit
2017-07-15 17:57 ` [PATCH v10 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
` (9 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 81b398d..d4ebb1b 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 774408c..3ee20a8 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1748,13 +1748,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 02/11] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-16 15:58 ` Thomas Monjalon
2017-07-17 13:56 ` Ferruh Yigit
2017-07-15 17:57 ` [PATCH v10 04/11] net/failsafe: add plug-in support Gaetan Rivet
` (8 subsequent siblings)
11 siblings, 2 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 5 +
doc/guides/nics/fail_safe.rst | 142 +++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 66 +++
drivers/net/failsafe/failsafe.c | 232 ++++++++
drivers/net/failsafe/failsafe_args.c | 331 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 138 +++++
drivers/net/failsafe/failsafe_ops.c | 664 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 210 +++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1932 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 368973a..294b8b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -341,6 +341,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 8ae6e92..7805605 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,11 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..5c8a93b
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,142 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation option
+------------------
+
+This option can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to any ``-w`` device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd. The slave device should be blacklisted from normal EAL
+ operations to avoid probing it twice when in PCI blacklist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -b 84:00.0 -b 00:04.0 -- -i
+
+ Note that PCI blacklist mode is the default PCI operating mode. In this
+ configuration, the fail-safe cannot proceed with its slaves if they have
+ been probed beforehand.
+
+#. Alternatively, it can be used alongside any other device in whitelist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -w 81:00.0 -- -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..3c52823
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..2b5e5f8
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,66 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -O3
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..0fb09c9
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,232 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..79e5bfa
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..f4bd777
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,138 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ ret = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ rte_errno ? "(" : "",
+ rte_errno ? strerror(rte_errno) : "",
+ rte_errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = rte_eth_dev_allocated(da->name);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..91e2193
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,664 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ RTE_ASSERT(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..d0ec4f8
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,210 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define DEBUG(...) LOG_(DEBUG, __VA_ARGS__)
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, __VA_ARGS__)
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 5bb4290..c25fdd9 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -121,6 +121,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-15 17:57 ` [PATCH v10 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-16 15:58 ` Thomas Monjalon
2017-07-16 20:00 ` Gaëtan Rivet
2017-07-17 13:56 ` Ferruh Yigit
1 sibling, 1 reply; 195+ messages in thread
From: Thomas Monjalon @ 2017-07-16 15:58 UTC (permalink / raw)
To: Gaetan Rivet; +Cc: dev
Hi Gaetan,
15/07/2017 19:57, Gaetan Rivet:
> +#. Start testpmd. The slave device should be blacklisted from normal EAL
> + operations to avoid probing it twice when in PCI blacklist mode.
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
> + -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> + -b 84:00.0 -b 00:04.0 -- -i
It is weird to use -w to declare the failsafe device.
And I think it does not work with -w.
Should it be changed to --vdev?
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-16 15:58 ` Thomas Monjalon
@ 2017-07-16 20:00 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-16 20:00 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Sun, Jul 16, 2017 at 05:58:13PM +0200, Thomas Monjalon wrote:
> Hi Gaetan,
>
> 15/07/2017 19:57, Gaetan Rivet:
> > +#. Start testpmd. The slave device should be blacklisted from normal EAL
> > + operations to avoid probing it twice when in PCI blacklist mode.
> > +
> > + .. code-block:: console
> > +
> > + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
> > + -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> > + -b 84:00.0 -b 00:04.0 -- -i
>
> It is weird to use -w to declare the failsafe device.
> And I think it does not work with -w.
> Should it be changed to --vdev?
It did work before [1], and it was a way to showcase the new format, but
with [1] applied, then it should come back to --vdev indeed.
[1]: http://dpdk.org/ml/archives/dev/2017-July/071361.html
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-15 17:57 ` [PATCH v10 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
2017-07-16 15:58 ` Thomas Monjalon
@ 2017-07-17 13:56 ` Ferruh Yigit
2017-07-17 17:11 ` Gaëtan Rivet
2017-07-17 23:17 ` Gaëtan Rivet
1 sibling, 2 replies; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 13:56 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> Introduce the fail-safe poll mode driver initialization and enable its
> build infrastructure.
>
> This PMD allows for applications to benefit from true hot-plugging
> support without having to implement it.
>
> It intercepts and manages Ethernet device removal events issued by
> slave PMDs and re-initializes them transparently when brought back.
> It also allows defining a contingency to the removal of a device, by
> designating a fail-over device that will take on transmitting operations
> if the preferred device is removed.
>
> Applications only see a fail-safe instance, without caring for
> underlying activity ensuring their continued operations.
All PMD in a single patch is hard to review, I am sure some details
missed during the review, but taking account the histroy of the PMD I
accept this as it is, but I will rely on your support to fix issues in
the future.
>
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> Acked-by: Olga Shern <olgas@mellanox.com>
<...>
> +Usage example
> +~~~~~~~~~~~~~
> +
> +This section shows some example of using **testpmd** with a fail-safe PMD.
> +
> +#. Request huge pages:
> +
> + .. code-block:: console
> +
> + echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
I think this is extra for usage sample, if you want there is generic
guide [1] that you ca reference.
[1]
http://dpdk.org/doc/guides/nics/build_and_test.html
> +
> +#. Start testpmd. The slave device should be blacklisted from normal EAL
> + operations to avoid probing it twice when in PCI blacklist mode.
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
> + -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> + -b 84:00.0 -b 00:04.0 -- -i
Do you think does it make sense to stress sub-device shouldn't be probed
by EAL, I believe it is not clear above.
> +
> + Note that PCI blacklist mode is the default PCI operating mode. In this
> + configuration, the fail-safe cannot proceed with its slaves if they have
> + been probed beforehand.
> +
> +#. Alternatively, it can be used alongside any other device in whitelist mode.
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
> + -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> + -w 81:00.0 -- -i
> +
<...>
> +[Features]
> +Link status = Y
> +MTU update = Y
> +Promiscuous mode = Y
> +Allmulticast mode = Y
> +VLAN filter = Y
> +Packet type parsing = Y
I am not sure how to document some of these features, because they
depends on sub-device capability. I guess if sub-device doesn't support
packet type parsing, this feature won't be supported?
> +Basic stats = Y
> +Stats per queue = Y
> +Unicast MAC filter = Y
> +Queue start/stop = Y
> +Jumbo frame = Y
> +Multicast MAC filter = Y
Is above ones supported by PMD, I don't see them unless I miss something.
+ "Flow Control" seems supported.
<...>
> +# This lib depends upon:
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
DEPDIRS-y no more used, can be removed.
> +
> +# Basic CFLAGS:
> +CFLAGS += -std=gnu99 -Wall -Wextra
-Wall should be coming from $(WERROR_FLAGS), no need to add here.
And are you sure about gnu99, mlx drivers tends to enforce a standard
and they updated to c11, do you want to do same here.
> +CFLAGS += -O3
> +CFLAGS += -I.
> +CFLAGS += -D_DEFAULT_SOURCE
> +CFLAGS += -D_XOPEN_SOURCE=700
Is there a reason for these variables, or are these copy-paste?
> +CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -Wno-strict-prototypes
> +CFLAGS += -pedantic -DPEDANTIC
Again, just question, is pedantic mode intentional, or copy-paste?
<...>
> +static int
> +fs_eth_dev_create(struct rte_vdev_device *vdev)
> +{
> + struct rte_eth_dev *dev;
> + struct ether_addr *mac;
> + struct fs_priv *priv;
> + struct sub_device *sdev;
> + const char *params;
> + unsigned int socket_id;
> + uint8_t i;
> + int ret;
> +
> + dev = NULL;
> + priv = NULL;
> + params = rte_vdev_device_args(vdev);
> + socket_id = rte_socket_id();
> + INFO("Creating fail-safe device on NUMA socket %u",
> + socket_id);
No line break required.
> + dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
> + if (dev == NULL) {
> + ERROR("Unable to allocate rte_eth_dev");
> + return -1;
> + }
> + priv = dev->data->dev_private;
> + PRIV(dev)->dev = dev;
Altough this is valid, what about?
priv = PRIV(dev);
priv->dev = dev;
> + dev->dev_ops = &failsafe_ops;
> + TAILQ_INIT(&dev->link_intr_cbs);
Not required, rte_eth_dev_allocate() initializes this.
> + dev->data->dev_flags = 0x0;
Not required to set zero, dev->data already memset to zero.
> + dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
> + dev->data->dev_link = eth_link;
> + PRIV(dev)->nb_mac_addr = 1;
> + dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
> + dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
> + if (params == NULL) {
I would prefer input control as first thing in the function, before
allocating the device.
> + ERROR("This PMD requires sub-devices, none provided");
> + goto free_dev;
> + }
> + ret = fs_sub_device_create(dev, params);
This function looks like just allocates memory for sub devices, does it
make sense to rename it as fs_sub_device_alloc()?
> + if (ret) {
> + ERROR("Could not allocate sub_devices");
> + goto free_dev;
> + }
<...>
> +free_args:
> + failsafe_args_free(dev);
> +free_subs:
> + fs_sub_device_free(dev);
> +free_dev:
> + rte_eth_dev_release_port(dev);
Device private data should be freed.
> + return -1;
> +}
<...>
> +static int
> +rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
> +{
> + const char *name;
> +
> + name = rte_vdev_device_name(vdev);
> + if (vdev == NULL)
> + return -EINVAL;
I think you don't need this check, if name is NULL, probe shouldn't be
called, same for remove().
> + INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
> + name);
Line break not required.
<...>
> +RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
> +RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
I belive alias is not required for new PMDs, this is for backward
compability for old drivers.
<...>
> +int
> +failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
> +{
> + struct fs_priv *priv;
> + char mut_params[DEVARGS_MAXLEN] = "";
Out of curiosity, what does "mut" stands for?
> + struct rte_kvargs *kvlist = NULL;
> + unsigned int arg_count;
> + size_t n;
> + int ret;
> +
> + if (dev == NULL || params == NULL)
> + return -EINVAL;
This check looks like redundant.
> + priv = PRIV(dev);
> + ret = 0;
> + priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
> + /* default parameters */
> + mac_from_arg = 0;
This is global value, I believe it is better to set default value where
variable defined with a comment. Here is easy to miss the default value.
> + n = snprintf(mut_params, sizeof(mut_params), "%s", params);
> + if (n >= sizeof(mut_params)) {
> + ERROR("Parameter string too long (>=%zu)",
> + sizeof(mut_params));
> + return -ENOMEM;
> + }
> + ret = fs_parse_sub_devices(fs_parse_device_param,
> + dev, params);
Why the device argument is not defined as dev=xxx, instead of current
dev(xxx).
"dev=xxx" will be compatible with rest of the argument usage, and it
will be possible to use kvargs to parse it, which will make this code
simpler I believe.
What is the reason of using different syntax?
> + if (ret < 0)
> + return ret;
> + ret = fs_remove_sub_devices_definition(mut_params);
> + if (ret < 0)
> + return ret;
> + if (strnlen(mut_params, sizeof(mut_params)) > 0) {
> + kvlist = rte_kvargs_parse(mut_params,
> + pmd_failsafe_init_parameters);
> + if (kvlist == NULL) {
> + ERROR("Error parsing parameters, usage:\n"
> + PMD_FAILSAFE_PARAM_STRING);
> + return -1;
> + }
> + /* MAC addr */
> + arg_count = rte_kvargs_count(kvlist,
> + PMD_FAILSAFE_MAC_KVARG);
> + if (arg_count == 1) {
> + ret = rte_kvargs_process(kvlist,
> + PMD_FAILSAFE_MAC_KVARG,
> + &fs_get_mac_addr_arg,
> + &dev->data->mac_addrs[0]);
> + if (ret < 0)
> + goto free_kvlist;
> + mac_from_arg = 1;
> + }
Is ignoring the case mac defined more than once intentional?
> + }
> +free_kvlist:
> + rte_kvargs_free(kvlist);
> + return ret;
> +}
> +
<...>
> +static int
> +fs_count_device(struct rte_eth_dev *dev, const char *param,
> + uint8_t head __rte_unused)
> +{
> + size_t b = 0;
> +
> + while (param[b] != '(' &&
> + param[b] != '\0')
> + b++;
> + if (strncmp(param, "dev", b) &&
> + strncmp(param, "exec", b)) {
I believe param "exec" will be introduced in further patches?
> + ERROR("Unrecognized device type: %.*s", (int)b, param);
> + return -EINVAL;
> + }
> + PRIV(dev)->subs_tail += 1;
> + return 0;
> +}
> +
<...>
> +static int
> +fs_bus_init(struct rte_eth_dev *dev)
> +{
> + struct sub_device *sdev;
> + struct rte_devargs *da;
> + uint8_t i;
> + int ret;
> +
> + FOREACH_SUBDEV(sdev, i, dev) {
Can FOREACH_SUBDEV_ST(..., DEV_PARSED) be used here?
And what do you think renaming "FOREACH_SUBDEV_ST" to
"FOREACH_SUBDEV_STATE"?
> + if (sdev->state != DEV_PARSED)
> + continue;
> + da = &sdev->devargs;
> + ret = rte_eal_hotplug_add(da->bus->name,
> + da->name,
> + da->args);
<...>
> + /*
> + * We only update TX_SUBDEV if we are not started.
> + * If a sub_device is emitting, we will switch the TX_SUBDEV to the
> + * preferred port only upon starting it, so that the switch is smoother.
> + */
> + if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED)
Can you please document concept of the "prefered sub device" in
documentation?
> + if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
> + (TX_SUBDEV(dev) == NULL ||
> + (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
> + DEBUG("Switching tx_dev to preferred sub_device");
> + PRIV(dev)->subs_tx = 0;
> + }
<...>
> +static struct rte_eth_dev_info default_infos = {
> + .driver_name = pmd_failsafe_driver_name,
This should be dev->device->driver->name, but already overwriiten by
rte_eth_dev_info_get() so you can drop this.
> + /* Max possible number of elements */
<...>
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Closing sub_device %d", i);
> + rte_eth_dev_close(PORT_ID(sdev));
> + sdev->state = DEV_ACTIVE - 1;
Should it be better to set state to DEV_PROBED? Instead of calculation.
> + }
> + fs_dev_free_queues(dev);
> +}
> +
<...>
> +static void
> +fs_stats_get(struct rte_eth_dev *dev,
> + struct rte_eth_stats *stats)
> +{
> + memset(stats, 0, sizeof(*stats));
memset not required, done by API
> + if (TX_SUBDEV(dev) == NULL)
> + return;
> + rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
> +}
> +
<...>
> + sdev = TX_SUBDEV(dev);
> + rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
> + PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
Is intention &= ?
> + PRIV(dev)->infos.tx_offload_capa &=
> + default_infos.tx_offload_capa;
> + PRIV(dev)->infos.flow_type_rss_offloads &=
> + default_infos.flow_type_rss_offloads;
> + }
> + rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
> +}
<...>
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
> + ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
> + if (ret) {
> + ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
> + " with error %d", i, ret);
You can prefer to not break the log message.
> + return ret;
> + }
> + }
> + return 0;
> +}
<...>
> +
> +#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
Is this related to next patches in the set?
<...>
> +enum dev_state {
> + DEV_UNDEFINED = 0,
Setting value not required.
> + DEV_PARSED,
> + DEV_PROBED,
> + DEV_ACTIVE,
> + DEV_STARTED,
> +};
<...>
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-17 13:56 ` Ferruh Yigit
@ 2017-07-17 17:11 ` Gaëtan Rivet
2017-07-17 23:17 ` Gaëtan Rivet
1 sibling, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 17:11 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Mon, Jul 17, 2017 at 02:56:54PM +0100, Ferruh Yigit wrote:
> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> > Introduce the fail-safe poll mode driver initialization and enable its
> > build infrastructure.
> >
> > This PMD allows for applications to benefit from true hot-plugging
> > support without having to implement it.
> >
> > It intercepts and manages Ethernet device removal events issued by
> > slave PMDs and re-initializes them transparently when brought back.
> > It also allows defining a contingency to the removal of a device, by
> > designating a fail-over device that will take on transmitting operations
> > if the preferred device is removed.
> >
> > Applications only see a fail-safe instance, without caring for
> > underlying activity ensuring their continued operations.
>
> All PMD in a single patch is hard to review, I am sure some details
> missed during the review, but taking account the histroy of the PMD I
> accept this as it is, but I will rely on your support to fix issues in
> the future.
>
Sure, sorry for having this one first big patch.
I thought about having a skeleton patch first, but found it made little
sense. I tried to restrict this version to the bare functionalities,
adding the others afterward.
I will fix any issues. From what I've seen I agree with almost all of your
remarks and will send a new version shortly. In the meantime, I will answer
in this email a few clarifying questions.
<...>
> > +VLAN filter = Y
> > +Packet type parsing = Y
>
> I am not sure how to document some of these features, because they
> depends on sub-device capability. I guess if sub-device doesn't support
> packet type parsing, this feature won't be supported?
>
Yes, supporting a feature for the fail-safe means that there is some
verification and synchronization code related to this feature. All
sub_device should have feature parity, and the features of the fail-safe are limited
to those of the sub_devices.
I thought advertizing the support made sense as there was some code
related to it in the fail-safe.
> > +int
> > +failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
> > +{
> > + struct fs_priv *priv;
> > + char mut_params[DEVARGS_MAXLEN] = "";
>
> Out of curiosity, what does "mut" stands for?
>
This is the mutable version of params.
<...>
> > + n = snprintf(mut_params, sizeof(mut_params), "%s", params);
> > + if (n >= sizeof(mut_params)) {
> > + ERROR("Parameter string too long (>=%zu)",
> > + sizeof(mut_params));
> > + return -ENOMEM;
> > + }
> > + ret = fs_parse_sub_devices(fs_parse_device_param,
> > + dev, params);
>
> Why the device argument is not defined as dev=xxx, instead of current
> dev(xxx).
>
> "dev=xxx" will be compatible with rest of the argument usage, and it
> will be possible to use kvargs to parse it, which will make this code
> simpler I believe.
>
> What is the reason of using different syntax?
>
Using the dev() syntax allows the user to explicitly set the limits of
the sub_device declaration, clarifying for which device each kvargs is.
The issue is that the kvargs library does not allow to set state
informations in the parser depending on the position in the kvlist. An
alternative would have been for example to restrict the kvargs to that
of the last declared dev=, however, this means multi-stage kvargs
parsing, which mean pre-processing of the parameter list, etc...
An example:
net_failsafe0,dev=net_tap0,iface=tap0,mac=00:01:02:03:04:05
net_failsafe0,dev(net_tap0,iface=tap0),mac=00:01:02:03:04:05
This is much simpler to parse this way, and much clearer I think
for users.
The kvargs library was not designed with recursive PMDs in mind.
<...>
> > +static int
> > +fs_bus_init(struct rte_eth_dev *dev)
> > +{
> > + struct sub_device *sdev;
> > + struct rte_devargs *da;
> > + uint8_t i;
> > + int ret;
> > +
> > + FOREACH_SUBDEV(sdev, i, dev) {
>
> Can FOREACH_SUBDEV_ST(..., DEV_PARSED) be used here?
>
I could use it, this would restrict the iteration only to sub_devices
being at least of the state DEV_PARSED. However, in the check just
below:
+ if (sdev->state != DEV_PARSED)
+ continue;
I would have to pass on any device being in a state higher than
DEV_PARSED. Thus, using FOREACH_SUBDEV_ST would not simplify the code
flow. By using FOREACH_SUBDEV() directly, the reader at least has a
simpler parsing to do of my intent:
foreach subdev not "parsed".
> And what do you think renaming "FOREACH_SUBDEV_ST" to
> "FOREACH_SUBDEV_STATE"?
>
Sure, I pushed for brievity but it might be easier to read.
<...>
> > + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> > + DEBUG("Closing sub_device %d", i);
> > + rte_eth_dev_close(PORT_ID(sdev));
> > + sdev->state = DEV_ACTIVE - 1;
>
> Should it be better to set state to DEV_PROBED? Instead of calculation.
>
I wanted to be able to add / remove device states without having to
rewrite each of those state changes (there are a few in several places).
If I insert a new device state between ACTIVE and PROBED, setting to
DEV_PROBED would still be valid (no compile error), but it would be a
bug. It would be very easy to miss a reference to this specific state.
Those states bugs are a little hard to find at runtime, they usually
have subtle side-effects.
I can change it if you prefer, but I would probably introduce a helper
in the form of fs_dev_state_prev/next, thus having a single place to
check for any changes.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-17 13:56 ` Ferruh Yigit
2017-07-17 17:11 ` Gaëtan Rivet
@ 2017-07-17 23:17 ` Gaëtan Rivet
2017-07-18 10:13 ` Ferruh Yigit
1 sibling, 1 reply; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 23:17 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Mon, Jul 17, 2017 at 02:56:54PM +0100, Ferruh Yigit wrote:
<...>
> > +Stats per queue = Y
> > +Unicast MAC filter = Y
> > +Queue start/stop = Y
> > +Jumbo frame = Y
> > +Multicast MAC filter = Y
>
> Is above ones supported by PMD, I don't see them unless I miss something.
>
Queue start/stop was an error.
All others are supported as long as the slave support it.
<...>
> > + sdev = TX_SUBDEV(dev);
> > + rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
> > + PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
>
> Is intention &= ?
>
rx_offload_capa is already set a little higher, and then an AND is done
on it with all slaves. The "=" is correct here. Thanks for asking
though, it's always useful to check :).
---
I fixed all other remarks. I will wait a little for any possible
additional changes you might want to point before sending the new
version.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-17 23:17 ` Gaëtan Rivet
@ 2017-07-18 10:13 ` Ferruh Yigit
2017-07-18 11:01 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-18 10:13 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: dev
On 7/18/2017 12:17 AM, Gaëtan Rivet wrote:
<...>
>
> I fixed all other remarks. I will wait a little for any possible
> additional changes you might want to point before sending the new
> version.
OK, there were some patches from Thomas addition to failsafe patchset,
are they all clarified, merged or rejected for this patchset?
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 03/11] net/failsafe: add fail-safe PMD
2017-07-18 10:13 ` Ferruh Yigit
@ 2017-07-18 11:01 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-18 11:01 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Tue, Jul 18, 2017 at 11:13:34AM +0100, Ferruh Yigit wrote:
> On 7/18/2017 12:17 AM, Gaëtan Rivet wrote:
> <...>
>
> >
> > I fixed all other remarks. I will wait a little for any possible
> > additional changes you might want to point before sending the new
> > version.
>
> OK, there were some patches from Thomas addition to failsafe patchset,
> are they all clarified, merged or rejected for this patchset?
The patch he sent last week is postponed. It does not work as it is, and
the fix requires additional API / dev. We will look into it next
release.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v10 04/11] net/failsafe: add plug-in support
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (2 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 05/11] net/failsafe: add flexible device definition Gaetan Rivet
` (7 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 19 +++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 33 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 424 insertions(+), 43 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 5c8a93b..5ec3031 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -98,6 +98,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -140,3 +145,17 @@ Care must be taken, however, to respect the **ether** API concerning device
access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index 2b5e5f8..f963ffb 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 0fb09c9..73be3d7 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -81,6 +81,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -129,6 +195,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 79e5bfa..2e60442 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -32,6 +32,7 @@
*/
#include <string.h>
+#include <errno.h>
#include <rte_devargs.h>
#include <rte_malloc.h>
@@ -45,9 +46,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll;
int mac_from_arg;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +224,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -252,6 +273,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
ret = 0;
priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
/* default parameters */
+ hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
mac_from_arg = 0;
n = snprintf(mut_params, sizeof(mut_params), "%s", params);
if (n >= sizeof(mut_params)) {
@@ -274,6 +296,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_PLUG_IN_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -287,6 +319,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index f4bd777..1bab3fc 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -72,37 +72,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -134,5 +111,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 91e2193..3112bc8 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -90,6 +90,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -109,21 +111,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -133,6 +123,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -184,6 +175,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index d0ec4f8..de77739 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,12 +41,14 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
-#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -105,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -125,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -207,4 +228,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 05/11] net/failsafe: add flexible device definition
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (3 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 04/11] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-17 15:45 ` Ferruh Yigit
2017-07-15 17:57 ` [PATCH v10 06/11] net/failsafe: support flow API Gaetan Rivet
` (6 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 95 +++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 126 insertions(+)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 5ec3031..be73d7e 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -87,6 +87,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -135,6 +148,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
-w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
-w 81:00.0 -- -i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 2e60442..f939687 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -34,6 +34,7 @@
#include <string.h>
#include <errno.h>
+#include <rte_debug.h>
#include <rte_devargs.h>
#include <rte_malloc.h>
#include <rte_kvargs.h>
@@ -97,6 +98,72 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ RTE_ASSERT(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ sdev->cmdline = calloc(1, len);
+ if (sdev->cmdline == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -131,6 +198,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -332,6 +407,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -362,3 +439,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index de77739..8b99d61 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_PLUG_IN_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v10 05/11] net/failsafe: add flexible device definition
2017-07-15 17:57 ` [PATCH v10 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-17 15:45 ` Ferruh Yigit
2017-07-17 15:52 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 15:45 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> Add the "exec" device type.
> The parameters given to this type of device will be executed in a shell.
> The output of this command is then used as a definition for a device.
>
> That command can be re-interpreted if the related device is not
> plugged-in. It allows for a device definition to react to system
> changes (e.g. changing PCI bus for a given device).
>
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> Acked-by: Olga Shern <olgas@mellanox.com>
> ---
> doc/guides/nics/fail_safe.rst | 20 +++++++
> drivers/net/failsafe/failsafe_args.c | 95 +++++++++++++++++++++++++++++++++
> drivers/net/failsafe/failsafe_ether.c | 7 +++
> drivers/net/failsafe/failsafe_private.h | 4 ++
> 4 files changed, 126 insertions(+)
>
> diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
> index 5ec3031..be73d7e 100644
> --- a/doc/guides/nics/fail_safe.rst
> +++ b/doc/guides/nics/fail_safe.rst
> @@ -87,6 +87,19 @@ Fail-safe command line parameters
> additional sub-device parameters if need be. They will be passed on to the
> sub-device.
>
> +- **exec(<shell command>)** parameter
> +
> + This parameter allows the user to provide a command to the fail-safe PMD to
> + execute and define a sub-device.
> + It is done within a regular shell context.
> + The first line of its output is read by the fail-safe PMD and otherwise
> + interpreted as if passed by the regular **dev** parameter.
> + Any other line is discarded.
> + If the command fail or output an incorrect string, the sub-device is not
> + initialized.
> + All commas within the ``shell command`` are replaced by spaces before
> + executing the command. This helps using scripts to specify devices.
> +
> - **mac** parameter [MAC address]
>
> This parameter allows the user to set a default MAC address to the fail-safe
> @@ -135,6 +148,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
> -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> -w 81:00.0 -- -i
>
> +#. Start testpmd using a flexible device definition
> +
> + .. code-block:: console
> +
> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
> + --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
Hi Gaetan,
What is the usecase for this feature.
How this is different from --vdev='net_failsafe0,dev(`echo 84:00.0`)' ?
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 05/11] net/failsafe: add flexible device definition
2017-07-17 15:45 ` Ferruh Yigit
@ 2017-07-17 15:52 ` Gaëtan Rivet
2017-07-17 16:04 ` Ferruh Yigit
0 siblings, 1 reply; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 15:52 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
Hi Ferruh,
(Thanks for the review by the way, I will answer the other more lengthy
emails in due time)
On Mon, Jul 17, 2017 at 04:45:59PM +0100, Ferruh Yigit wrote:
> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> > Add the "exec" device type.
> > The parameters given to this type of device will be executed in a shell.
> > The output of this command is then used as a definition for a device.
> >
> > That command can be re-interpreted if the related device is not
> > plugged-in. It allows for a device definition to react to system
> > changes (e.g. changing PCI bus for a given device).
> >
> > Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> > Acked-by: Olga Shern <olgas@mellanox.com>
> > ---
> > doc/guides/nics/fail_safe.rst | 20 +++++++
> > drivers/net/failsafe/failsafe_args.c | 95 +++++++++++++++++++++++++++++++++
> > drivers/net/failsafe/failsafe_ether.c | 7 +++
> > drivers/net/failsafe/failsafe_private.h | 4 ++
> > 4 files changed, 126 insertions(+)
> >
> > diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
> > index 5ec3031..be73d7e 100644
> > --- a/doc/guides/nics/fail_safe.rst
> > +++ b/doc/guides/nics/fail_safe.rst
> > @@ -87,6 +87,19 @@ Fail-safe command line parameters
> > additional sub-device parameters if need be. They will be passed on to the
> > sub-device.
> >
> > +- **exec(<shell command>)** parameter
> > +
> > + This parameter allows the user to provide a command to the fail-safe PMD to
> > + execute and define a sub-device.
> > + It is done within a regular shell context.
> > + The first line of its output is read by the fail-safe PMD and otherwise
> > + interpreted as if passed by the regular **dev** parameter.
> > + Any other line is discarded.
> > + If the command fail or output an incorrect string, the sub-device is not
> > + initialized.
> > + All commas within the ``shell command`` are replaced by spaces before
> > + executing the command. This helps using scripts to specify devices.
> > +
> > - **mac** parameter [MAC address]
> >
> > This parameter allows the user to set a default MAC address to the fail-safe
> > @@ -135,6 +148,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
> > -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
> > -w 81:00.0 -- -i
> >
> > +#. Start testpmd using a flexible device definition
> > +
> > + .. code-block:: console
> > +
> > + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
> > + --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
>
> Hi Gaetan,
>
> What is the usecase for this feature.
>
> How this is different from --vdev='net_failsafe0,dev(`echo 84:00.0`)' ?
This version would be interpreted once, at the launch of the fail-safe
PMD.
The exec option will execute the command again each time the fail-safe
tries to probe the sub_device. This means that in a live VM migration
context, the sub_device can change PCI address (for example), and still be
matched by the command using other identifying info (MAC address,
class_id, ...).
It must be reinterpreted upon plugin of the sub_device,
as the output would change from the time the fail-safe was started.
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v10 05/11] net/failsafe: add flexible device definition
2017-07-17 15:52 ` Gaëtan Rivet
@ 2017-07-17 16:04 ` Ferruh Yigit
0 siblings, 0 replies; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 16:04 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: dev
On 7/17/2017 4:52 PM, Gaëtan Rivet wrote:
> Hi Ferruh,
>
> (Thanks for the review by the way, I will answer the other more lengthy
> emails in due time)
>
> On Mon, Jul 17, 2017 at 04:45:59PM +0100, Ferruh Yigit wrote:
>> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
>>> Add the "exec" device type.
>>> The parameters given to this type of device will be executed in a shell.
>>> The output of this command is then used as a definition for a device.
>>>
>>> That command can be re-interpreted if the related device is not
>>> plugged-in. It allows for a device definition to react to system
>>> changes (e.g. changing PCI bus for a given device).
>>>
>>> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
>>> Acked-by: Olga Shern <olgas@mellanox.com>
>>> ---
>>> doc/guides/nics/fail_safe.rst | 20 +++++++
>>> drivers/net/failsafe/failsafe_args.c | 95 +++++++++++++++++++++++++++++++++
>>> drivers/net/failsafe/failsafe_ether.c | 7 +++
>>> drivers/net/failsafe/failsafe_private.h | 4 ++
>>> 4 files changed, 126 insertions(+)
>>>
>>> diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
>>> index 5ec3031..be73d7e 100644
>>> --- a/doc/guides/nics/fail_safe.rst
>>> +++ b/doc/guides/nics/fail_safe.rst
>>> @@ -87,6 +87,19 @@ Fail-safe command line parameters
>>> additional sub-device parameters if need be. They will be passed on to the
>>> sub-device.
>>>
>>> +- **exec(<shell command>)** parameter
>>> +
>>> + This parameter allows the user to provide a command to the fail-safe PMD to
>>> + execute and define a sub-device.
>>> + It is done within a regular shell context.
>>> + The first line of its output is read by the fail-safe PMD and otherwise
>>> + interpreted as if passed by the regular **dev** parameter.
>>> + Any other line is discarded.
>>> + If the command fail or output an incorrect string, the sub-device is not
>>> + initialized.
>>> + All commas within the ``shell command`` are replaced by spaces before
>>> + executing the command. This helps using scripts to specify devices.
>>> +
>>> - **mac** parameter [MAC address]
>>>
>>> This parameter allows the user to set a default MAC address to the fail-safe
>>> @@ -135,6 +148,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
>>> -w 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
>>> -w 81:00.0 -- -i
>>>
>>> +#. Start testpmd using a flexible device definition
>>> +
>>> + .. code-block:: console
>>> +
>>> + $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
>>> + --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
>>
>> Hi Gaetan,
>>
>> What is the usecase for this feature.
>>
>> How this is different from --vdev='net_failsafe0,dev(`echo 84:00.0`)' ?
>
> This version would be interpreted once, at the launch of the fail-safe
> PMD.
>
> The exec option will execute the command again each time the fail-safe
> tries to probe the sub_device. This means that in a live VM migration
> context, the sub_device can change PCI address (for example), and still be
> matched by the command using other identifying info (MAC address,
> class_id, ...).
>
> It must be reinterpreted upon plugin of the sub_device,
> as the output would change from the time the fail-safe was started.
Make sense, thanks for clarification.
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v10 06/11] net/failsafe: support flow API
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (4 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-17 16:03 ` Ferruh Yigit
2017-07-15 17:57 ` [PATCH v10 07/11] net/failsafe: support offload capabilities Gaetan Rivet
` (5 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 215 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 336 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 3c52823..9167b59 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Allmulticast mode = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index f963ffb..dc07264 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 73be3d7..5d35079 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -178,6 +178,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
if (params == NULL) {
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 1bab3fc..31257b0 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -62,6 +62,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..8547e51
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,215 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 3112bc8..0c8aa35 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -36,6 +36,7 @@
#include <rte_debug.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -629,6 +630,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -656,4 +684,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 8b99d61..af1e380 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED = 0,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v10 06/11] net/failsafe: support flow API
2017-07-15 17:57 ` [PATCH v10 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-17 16:03 ` Ferruh Yigit
2017-07-17 16:19 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 16:03 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> Acked-by: Olga Shern <olgas@mellanox.com>
<...>
> +
> + flow = fs_flow_allocate(attr, patterns, actions);
> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> + flow->flows[i] = rte_flow_create(PORT_ID(sdev),
> + attr, patterns, actions, error);
Should SUB_ID(sdev) used here? And in related functions.
flow->flows[SUB_ID(sdev)] = ...
> + if (flow->flows[i] == NULL) {
> + ERROR("Failed to create flow on sub_device %d",
> + i);
> + goto err;
> + }
<...>
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 06/11] net/failsafe: support flow API
2017-07-17 16:03 ` Ferruh Yigit
@ 2017-07-17 16:19 ` Gaëtan Rivet
2017-07-17 16:34 ` Ferruh Yigit
0 siblings, 1 reply; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 16:19 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Mon, Jul 17, 2017 at 05:03:46PM +0100, Ferruh Yigit wrote:
> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> > Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> > Acked-by: Olga Shern <olgas@mellanox.com>
>
> <...>
>
> > +
> > + flow = fs_flow_allocate(attr, patterns, actions);
> > + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> > + flow->flows[i] = rte_flow_create(PORT_ID(sdev),
> > + attr, patterns, actions, error);
>
> Should SUB_ID(sdev) used here? And in related functions.
> flow->flows[SUB_ID(sdev)] = ...
>
The SUB_ID(sdev) is the index in the sub_device array allocated in
private data for the fail-safe. It is also used for the sub_rte_flow in
the rte_flow (which sports an array of rte_flow pointers for each
sub_device).
PORT_ID(sdev) is the index in the rte_eth_devices array, meaning that
the rte_flow_create function is actually called using the public API on
the port.
This allows to trigger the additional operations usually done within the
ether API (storing the configuration in the eth_dev_data structure, some
side management), and following eventual changes automatically from the
fail-safe level.
> > + if (flow->flows[i] == NULL) {
> > + ERROR("Failed to create flow on sub_device %d",
> > + i);
> > + goto err;
> > + }
> <...>
>
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 06/11] net/failsafe: support flow API
2017-07-17 16:19 ` Gaëtan Rivet
@ 2017-07-17 16:34 ` Ferruh Yigit
2017-07-17 17:15 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 16:34 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: dev
On 7/17/2017 5:19 PM, Gaëtan Rivet wrote:
> On Mon, Jul 17, 2017 at 05:03:46PM +0100, Ferruh Yigit wrote:
>> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
>>> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
>>> Acked-by: Olga Shern <olgas@mellanox.com>
>>
>> <...>
>>
>>> +
>>> + flow = fs_flow_allocate(attr, patterns, actions);
>>> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
>>> + flow->flows[i] = rte_flow_create(PORT_ID(sdev),
>>> + attr, patterns, actions, error);
>>
>> Should SUB_ID(sdev) used here? And in related functions.
>> flow->flows[SUB_ID(sdev)] = ...
>>
>
> The SUB_ID(sdev) is the index in the sub_device array allocated in
> private data for the fail-safe. It is also used for the sub_rte_flow in
> the rte_flow (which sports an array of rte_flow pointers for each
> sub_device).
I got this part, let me ask another way, is it always guarantied, even
after some hotplug, "i" in FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
will be same with SUB_ID(sdev) ?
>
> PORT_ID(sdev) is the index in the rte_eth_devices array, meaning that
> the rte_flow_create function is actually called using the public API on
> the port.
>
> This allows to trigger the additional operations usually done within the
> ether API (storing the configuration in the eth_dev_data structure, some
> side management), and following eventual changes automatically from the
> fail-safe level.
>
>>> + if (flow->flows[i] == NULL) {
>>> + ERROR("Failed to create flow on sub_device %d",
>>> + i);
>>> + goto err;
>>> + }
>> <...>
>>
>
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 06/11] net/failsafe: support flow API
2017-07-17 16:34 ` Ferruh Yigit
@ 2017-07-17 17:15 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 17:15 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Mon, Jul 17, 2017 at 05:34:53PM +0100, Ferruh Yigit wrote:
> On 7/17/2017 5:19 PM, Gaëtan Rivet wrote:
> > On Mon, Jul 17, 2017 at 05:03:46PM +0100, Ferruh Yigit wrote:
> >> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> >>> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> >>> Acked-by: Olga Shern <olgas@mellanox.com>
> >>
> >> <...>
> >>
> >>> +
> >>> + flow = fs_flow_allocate(attr, patterns, actions);
> >>> + FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
> >>> + flow->flows[i] = rte_flow_create(PORT_ID(sdev),
> >>> + attr, patterns, actions, error);
> >>
> >> Should SUB_ID(sdev) used here? And in related functions.
> >> flow->flows[SUB_ID(sdev)] = ...
> >>
> >
> > The SUB_ID(sdev) is the index in the sub_device array allocated in
> > private data for the fail-safe. It is also used for the sub_rte_flow in
> > the rte_flow (which sports an array of rte_flow pointers for each
> > sub_device).
>
> I got this part, let me ask another way, is it always guarantied, even
> after some hotplug, "i" in FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
> will be same with SUB_ID(sdev) ?
>
Ah, yes. Sub_device slots are static, allocated once at launch and
reserved for only one device corresponding to its declaration.
Thus, the PORT_ID() can change, but the SUB_ID() is always the same.
> >
> > PORT_ID(sdev) is the index in the rte_eth_devices array, meaning that
> > the rte_flow_create function is actually called using the public API on
> > the port.
> >
> > This allows to trigger the additional operations usually done within the
> > ether API (storing the configuration in the eth_dev_data structure, some
> > side management), and following eventual changes automatically from the
> > fail-safe level.
> >
> >>> + if (flow->flows[i] == NULL) {
> >>> + ERROR("Failed to create flow on sub_device %d",
> >>> + i);
> >>> + goto err;
> >>> + }
> >> <...>
> >>
> >
>
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v10 07/11] net/failsafe: support offload capabilities
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (5 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-17 16:22 ` Ferruh Yigit
2017-07-15 17:57 ` [PATCH v10 08/11] net/failsafe: add fast burst functions Gaetan Rivet
` (4 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 6 ++
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
2 files changed, 135 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 9167b59..257f579 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -14,6 +14,12 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow API = Y
+VLAN offload = Y
+QinQ offload = Y
+L3 checksum offload = Y
+L4 checksum offload = Y
+Inner L3 checksum = Y
+Inner L4 checksum = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 0c8aa35..654b411 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -64,22 +64,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v10 07/11] net/failsafe: support offload capabilities
2017-07-15 17:57 ` [PATCH v10 07/11] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-17 16:22 ` Ferruh Yigit
2017-07-17 22:47 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-17 16:22 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> Acked-by: Olga Shern <olgas@mellanox.com>
> ---
> doc/guides/nics/features/failsafe.ini | 6 ++
> drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
> 2 files changed, 135 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
> index 9167b59..257f579 100644
> --- a/doc/guides/nics/features/failsafe.ini
> +++ b/doc/guides/nics/features/failsafe.ini
> @@ -14,6 +14,12 @@ Unicast MAC filter = Y
> Multicast MAC filter = Y
> VLAN filter = Y
> Flow API = Y
> +VLAN offload = Y
> +QinQ offload = Y
> +L3 checksum offload = Y
> +L4 checksum offload = Y
> +Inner L3 checksum = Y
> +Inner L4 checksum = Y
As previous comment on features, these are advertised as supported but
depends on sub-devices.
Overall I don't know what does these mean for failsafe like abstract device.
> Packet type parsing = Y
> Basic stats = Y
> Stats per queue = Y
> diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
> index 0c8aa35..654b411 100644
> --- a/drivers/net/failsafe/failsafe_ops.c
> +++ b/drivers/net/failsafe/failsafe_ops.c
> @@ -64,22 +64,149 @@ static struct rte_eth_dev_info default_infos = {
> .nb_seg_max = UINT16_MAX,
> .nb_mtu_seg_max = UINT16_MAX,
> },
> - /* Set of understood capabilities */
> - .rx_offload_capa = 0x0,
> + /*
> + * Set of capabilities that can be verified upon
> + * configuring a sub-device.
> + */
> + .rx_offload_capa =
> + DEV_RX_OFFLOAD_VLAN_STRIP |
> + DEV_RX_OFFLOAD_QINQ_STRIP |
> + DEV_RX_OFFLOAD_IPV4_CKSUM |
> + DEV_RX_OFFLOAD_UDP_CKSUM |
> + DEV_RX_OFFLOAD_TCP_CKSUM |
> + DEV_RX_OFFLOAD_TCP_LRO,
These are not dynamic, even though some may be disabled via
fs_port_disable_offload() same these values will be returned to the
application, which is wrong.
> .tx_offload_capa = 0x0,
Claiming support for most of the offloads means supporting it both for
Rx and Tx path. This patch only takes account the Rx ones.
> .flow_type_rss_offloads = 0x0,
> };
>
<...>
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v10 07/11] net/failsafe: support offload capabilities
2017-07-17 16:22 ` Ferruh Yigit
@ 2017-07-17 22:47 ` Gaëtan Rivet
0 siblings, 0 replies; 195+ messages in thread
From: Gaëtan Rivet @ 2017-07-17 22:47 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Mon, Jul 17, 2017 at 05:22:15PM +0100, Ferruh Yigit wrote:
> On 7/15/2017 6:57 PM, Gaetan Rivet wrote:
> > Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
> > Acked-by: Olga Shern <olgas@mellanox.com>
> > ---
> > doc/guides/nics/features/failsafe.ini | 6 ++
> > drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++-
> > 2 files changed, 135 insertions(+), 2 deletions(-)
> >
> > diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
> > index 9167b59..257f579 100644
> > --- a/doc/guides/nics/features/failsafe.ini
> > +++ b/doc/guides/nics/features/failsafe.ini
> > @@ -14,6 +14,12 @@ Unicast MAC filter = Y
> > Multicast MAC filter = Y
> > VLAN filter = Y
> > Flow API = Y
> > +VLAN offload = Y
> > +QinQ offload = Y
> > +L3 checksum offload = Y
> > +L4 checksum offload = Y
> > +Inner L3 checksum = Y
> > +Inner L4 checksum = Y
>
> As previous comment on features, these are advertised as supported but
> depends on sub-devices.
>
> Overall I don't know what does these mean for failsafe like abstract device.
>
We should look into this.
The rationale for features in fail-safe was that
- If the slave supported the feature, and using it with the fail-safe
did not impair the feature, then the fail-safe was transparent as far
as this feature was concerned --> support = Y.
Meaning that users would be able to use this feature with the
fail-safe.
- If any slave did not support the feature, it would be dynamically
disabled when it made sense, or ENOTSUPP is returned if an ops is
missing (checked automatically by calling the ether API).
In the end, the feature matrix is used by the user to check whether the
feature is available using this PMD. Disabling all features in the
matrix for the fail-safe does not help the user at all, as they should
then check manually / look at the code.
On the other hand, the possible issue is that some users might expect
that the fail-safe could emulate in software missing features. The
usefullness of having the matrix to compare against other PMDs features
outweight this possibility as I find this assumption far-fetched, but I
can always remove the feature support for the moment and we will see
afterward how to deal with it.
> > Packet type parsing = Y
> > Basic stats = Y
> > Stats per queue = Y
> > diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
> > index 0c8aa35..654b411 100644
> > --- a/drivers/net/failsafe/failsafe_ops.c
> > +++ b/drivers/net/failsafe/failsafe_ops.c
> > @@ -64,22 +64,149 @@ static struct rte_eth_dev_info default_infos = {
> > .nb_seg_max = UINT16_MAX,
> > .nb_mtu_seg_max = UINT16_MAX,
> > },
> > - /* Set of understood capabilities */
> > - .rx_offload_capa = 0x0,
> > + /*
> > + * Set of capabilities that can be verified upon
> > + * configuring a sub-device.
> > + */
> > + .rx_offload_capa =
> > + DEV_RX_OFFLOAD_VLAN_STRIP |
> > + DEV_RX_OFFLOAD_QINQ_STRIP |
> > + DEV_RX_OFFLOAD_IPV4_CKSUM |
> > + DEV_RX_OFFLOAD_UDP_CKSUM |
> > + DEV_RX_OFFLOAD_TCP_CKSUM |
> > + DEV_RX_OFFLOAD_TCP_LRO,
>
> These are not dynamic, even though some may be disabled via
> fs_port_disable_offload() same these values will be returned to the
> application, which is wrong.
>
These are the default rx_offload_capa. This flag value is AND-ed with
that of the slaves before being returned. A slave is assured to be
present at all time, so it will be restricted to the common set between
the fail-safe and the slave features.
> > .tx_offload_capa = 0x0,
>
> Claiming support for most of the offloads means supporting it both for
> Rx and Tx path. This patch only takes account the Rx ones.
>
Ah I did not know. I will remove the feature support for offloads, the same
work that was done with Rx will be done with Tx.
> > .flow_type_rss_offloads = 0x0,
> > };
> >
>
> <...>
>
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v10 08/11] net/failsafe: add fast burst functions
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (6 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 07/11] net/failsafe: support offload capabilities Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 09/11] net/failsafe: support device removal Gaetan Rivet
` (3 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 123 ++++++++++++++++++++++++++------
2 files changed, 111 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index af1e380..2ebe03f 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -282,6 +289,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..5e380fe 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,62 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <rte_debug.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +109,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +122,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ RTE_ASSERT(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +167,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ RTE_ASSERT(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 09/11] net/failsafe: support device removal
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (7 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 08/11] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 10/11] net/failsafe: support link status change event Gaetan Rivet
` (2 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 14 +++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 37 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 233 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index be73d7e..12d3ed8 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation option
@@ -179,3 +185,11 @@ emit and receive packets. It will store any applied configuration, and try to
apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 5d35079..611bd83 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -142,6 +142,7 @@ fs_hotplug_alarm(void *arg)
if (ret)
ERROR("Unable to synchronize sub_device state");
}
+ failsafe_dev_remove(dev);
ret = failsafe_hotplug_alarm_install(dev);
if (ret)
ERROR("Unable to set up next alarm");
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index f939687..0d5be79 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -440,6 +440,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -452,6 +463,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 31257b0..d0954d9 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -63,6 +63,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -80,7 +81,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..ea3105c 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 654b411..06459ed 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -34,6 +34,7 @@
#include <stdint.h>
#include <rte_debug.h>
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -205,9 +206,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -216,6 +229,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -241,7 +264,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -352,10 +375,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -415,10 +442,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 2ebe03f..62881f6 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t *)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#define LOG__(level, m, ...) \
RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
@@ -257,33 +301,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_ST(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index 5e380fe..7311421 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,6 +31,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <rte_atomic.h>
#include <rte_debug.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -112,8 +113,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -146,8 +149,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
RTE_ASSERT(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -164,13 +169,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -181,10 +190,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
RTE_ASSERT(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 10/11] net/failsafe: support link status change event
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (8 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 09/11] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-15 17:57 ` [PATCH v10 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 257f579..251ce55 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
Queue start/stop = Y
MTU update = Y
Jumbo frame = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 611bd83..93b78a8 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -241,6 +241,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index ea3105c..a694b4d 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 06459ed..6c4d8e3 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -207,6 +207,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -219,6 +221,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -239,6 +252,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 62881f6..a9cddbc 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v10 11/11] net/failsafe: support flow API isolation mode
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (9 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 10/11] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-15 17:57 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-15 17:57 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a694b4d..c8b9c8a 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index 8547e51..5217adf 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -206,10 +206,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index a9cddbc..1bff123 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 00/11] introduce fail-safe PMD
2017-07-15 17:57 ` [PATCH v10 00/11] introduce fail-safe PMD Gaetan Rivet
` (10 preceding siblings ...)
2017-07-15 17:57 ` [PATCH v10 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
` (11 more replies)
11 siblings, 12 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This PMD intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back so that
existing applications do not need to be modified to benefit from true
hot-plugging support.
The stacked PMD approach shares many similarities with the bonding PMD but
with a different purpose. While bonding provides the ability to group
several links into a single logical device for enhanced throughput and
supports fail-over at link level, this one manages the sudden disappearance
of the underlying device; it guarantees applications face a valid device in
working order at all times.
Each fail-safe instance is configured to run atop one or several
devices, with one defined as the preferred device. Hot-plug events are
handled on all of them, and Tx is always directed to the preferred device
if present or to the next available failover device (Rx is always performed
on all devices for simplicity).
Moreover, the configured slaves (preferred or failover) do not need to be
present at initialization time and may appear later.
Slaves configuration is continuously synchronized with that of the virtual
device, which exposes their common set of capabilities to the application.
Failure to apply the current configuration state to a slave for any reason
simply reschedules its initialization.
This patchset depends on:
[dpdk-dev] [PATCH v4 0/8] fix hotplug API
http://dpdk.org/ml/archives/dev/2017-July/071340.html
v1 --> v2:
- Wrote documentation
- Fixed commit logs, signed-off-by
- Added LSC event support
- A few minor fixes
v2 --> v3:
- Numerous bug fixes.
- Complete sub-EAL rework to follow new bus API.
- burst protection on sub removal.
- more flexible sub definition.
- flow isolated mode support.
v3 --> v4:
- Split back commits
net/failsafe: add fast burst functions
net/failsafe: support device removal
That were squashed by error during a rebase
- Fix segfault on port plugin
- Fix isolate mode support for MLX4 ports plugin
v4 --> v5:
- Follow new plug / unplug API.
v5 --> v6:
- Follow new hotplug API.
- Improve usability of hotplug API.
- Fix rte_dev hotplug API implementation.
- Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
- Use it to clean up resources on hotplug_remove.
- Fix hotplug implementation and support un pci bus.
The scan was not idempotent, nor clean.
Neither were the device fields.
- Implement plug operation for vdev bus.
This is needed for hotplug support and to make the EAL
independent from vdev-specific API.
- Remove useless parameters from plug / unplug API.
This patchset is fairly big and complex. The hotplug API has been rushed and
has never been tested outside of the special case of vdev bus.
These evolutions are proposed alongside this PMD as only this PMD allows to test
this API at the moment, and without those evolutions this PMD cannot be used.
v6 --> v7
- Split the series in three, with
vlan filter configuration store standing alone
Hotplug API fixes separated
Fail-safe PMD on its own.
These changes should ease integration.
v7 --> v8
- Fix usage examples in documentation.
- Use rte_eth_dev_allocated when relevant.
v8 --> v9
- Use calloc instead of rte_realloc for command line parsing.
- Include errno only when necessary.
v9 --> v10
- Fix rte_flow description double-free issue.
Thanks Raslan for finding the issue :)
- Use RTE_ASSERT instead of assert.
Integrate the debug log of the fail-safe to
RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
- Remove devices post-state-sync during slave upkeep,
to avoid a useless early probe attempt.
v10 --> v11
- Added Glossary in documentation.
- Fixed issues oulined in [1].
- Removed Rx offload advertizement in feature matrix.
[1]: http://dpdk.org/ml/archives/dev/2017-July/071406.html
Gaetan Rivet (11):
ethdev: add deferred intermediate device state
ethdev: count devices consistently
net/failsafe: add fail-safe PMD
net/failsafe: add plug-in support
net/failsafe: add flexible device definition
net/failsafe: support flow API
net/failsafe: support Rx offload capabilities
net/failsafe: add fast burst functions
net/failsafe: support device removal
net/failsafe: support link status change event
net/failsafe: support flow API isolation mode
MAINTAINERS | 5 +
config/common_base | 5 +
doc/guides/nics/fail_safe.rst | 221 ++++++
doc/guides/nics/features/failsafe.ini | 26 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 60 ++
drivers/net/failsafe/failsafe.c | 299 ++++++++
drivers/net/failsafe/failsafe_args.c | 468 ++++++++++++
drivers/net/failsafe/failsafe_eal.c | 118 +++
drivers/net/failsafe/failsafe_ether.c | 437 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 244 ++++++
drivers/net/failsafe/failsafe_ops.c | 867 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 359 +++++++++
drivers/net/failsafe/failsafe_rxtx.c | 203 +++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
lib/librte_ether/rte_ethdev.c | 19 +-
lib/librte_ether/rte_ethdev.h | 14 +-
mk/rte.app.mk | 1 +
19 files changed, 3338 insertions(+), 15 deletions(-)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ether.c
create mode 100644 drivers/net/failsafe/failsafe_flow.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
--
2.1.4
^ permalink raw reply [flat|nested] 195+ messages in thread* [PATCH v11 01/11] ethdev: add deferred intermediate device state
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 16:04 ` Thomas Monjalon
2017-07-18 12:48 ` [PATCH v11 02/11] ethdev: count devices consistently Gaetan Rivet
` (10 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
This device state means that the device is managed externally, by
whichever party has set this state (PMD or application).
Note: this new device state is only an information. The related device
structure and operators are still valid and can be used normally.
It is however made private by device management helpers within ethdev,
making the device invisible to applications.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 3 ++-
lib/librte_ether/rte_ethdev.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a1b7447..81b398d 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -291,7 +291,8 @@ int
rte_eth_dev_is_valid_port(uint8_t port_id)
{
if (port_id >= RTE_MAX_ETHPORTS ||
- rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED)
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED &&
+ rte_eth_devices[port_id].state != RTE_ETH_DEV_DEFERRED))
return 0;
else
return 1;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 224f485..7b69ddf 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1611,6 +1611,7 @@ struct rte_eth_rxtx_callback {
enum rte_eth_dev_state {
RTE_ETH_DEV_UNUSED = 0,
RTE_ETH_DEV_ATTACHED,
+ RTE_ETH_DEV_DEFERRED,
};
/**
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v11 01/11] ethdev: add deferred intermediate device state
2017-07-18 12:48 ` [PATCH v11 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-18 16:04 ` Thomas Monjalon
0 siblings, 0 replies; 195+ messages in thread
From: Thomas Monjalon @ 2017-07-18 16:04 UTC (permalink / raw)
To: Gaetan Rivet; +Cc: dev, ferruh.yigit
18/07/2017 15:48, Gaetan Rivet:
> This device state means that the device is managed externally, by
> whichever party has set this state (PMD or application).
>
> Note: this new device state is only an information. The related device
> structure and operators are still valid and can be used normally.
>
> It is however made private by device management helpers within ethdev,
> making the device invisible to applications.
>
> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Ferruh, it can be taken in next-net as part of failsafe series. Thanks
^ permalink raw reply [flat|nested] 195+ messages in thread
* [PATCH v11 02/11] ethdev: count devices consistently
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 16:04 ` Thomas Monjalon
2017-07-18 12:48 ` [PATCH v11 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
` (9 subsequent siblings)
11 siblings, 1 reply; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Make the rte_eth_dev_count() return the number of available devices even
after some are detached by the hotplug API or put in a deferred state.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ether/rte_ethdev.c | 16 +++++++++-------
lib/librte_ether/rte_ethdev.h | 13 ++++++-------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 81b398d..d4ebb1b 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -72,7 +72,6 @@ static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_data *rte_eth_dev_data;
static uint8_t eth_dev_last_created_port;
-static uint8_t nb_ports;
/* spinlock for eth device callbacks */
static rte_spinlock_t rte_eth_dev_cb_lock = RTE_SPINLOCK_INITIALIZER;
@@ -210,7 +209,6 @@ eth_dev_get(uint8_t port_id)
TAILQ_INIT(&(eth_dev->link_intr_cbs));
eth_dev_last_created_port = port_id;
- nb_ports++;
return eth_dev;
}
@@ -283,7 +281,6 @@ rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
return -EINVAL;
eth_dev->state = RTE_ETH_DEV_UNUSED;
- nb_ports--;
return 0;
}
@@ -308,7 +305,15 @@ rte_eth_dev_socket_id(uint8_t port_id)
uint8_t
rte_eth_dev_count(void)
{
- return nb_ports;
+ uint8_t p;
+ uint8_t count;
+
+ count = 0;
+
+ RTE_ETH_FOREACH_DEV(p)
+ count++;
+
+ return count;
}
int
@@ -341,9 +346,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id)
return -EINVAL;
}
- if (!nb_ports)
- return -ENODEV;
-
RTE_ETH_FOREACH_DEV(i) {
if (!rte_eth_devices[i].device)
continue;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 7b69ddf..45aae74 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1746,13 +1746,12 @@ uint8_t rte_eth_find_next(uint8_t port_id);
/**
* Get the total number of Ethernet devices that have been successfully
- * initialized by the [matching] Ethernet driver during the PCI probing phase.
- * All devices whose port identifier is in the range
- * [0, rte_eth_dev_count() - 1] can be operated on by network applications
- * immediately after invoking rte_eal_init().
- * If the application unplugs a port using hotplug function, The enabled port
- * numbers may be noncontiguous. In the case, the applications need to manage
- * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro.
+ * initialized by the matching Ethernet driver during the PCI probing phase
+ * and that are available for applications to use. These devices must be
+ * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with
+ * non-contiguous ranges of devices.
+ * These non-contiguous ranges can be created by calls to hotplug functions or
+ * by some PMDs.
*
* @return
* - The total number of usable Ethernet devices.
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 03/11] net/failsafe: add fail-safe PMD
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 01/11] ethdev: add deferred intermediate device state Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 02/11] ethdev: count devices consistently Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 04/11] net/failsafe: add plug-in support Gaetan Rivet
` (8 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 5 +
config/common_base | 5 +
doc/guides/nics/fail_safe.rst | 163 ++++++
doc/guides/nics/features/failsafe.ini | 24 +
doc/guides/nics/index.rst | 1 +
drivers/net/Makefile | 2 +
drivers/net/failsafe/Makefile | 58 ++
drivers/net/failsafe/failsafe.c | 225 ++++++++
drivers/net/failsafe/failsafe_args.c | 327 +++++++++++
drivers/net/failsafe/failsafe_eal.c | 138 +++++
drivers/net/failsafe/failsafe_ops.c | 662 ++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 208 +++++++
drivers/net/failsafe/failsafe_rxtx.c | 107 ++++
drivers/net/failsafe/rte_pmd_failsafe_version.map | 4 +
mk/rte.app.mk | 1 +
15 files changed, 1930 insertions(+)
create mode 100644 doc/guides/nics/fail_safe.rst
create mode 100644 doc/guides/nics/features/failsafe.ini
create mode 100644 drivers/net/failsafe/Makefile
create mode 100644 drivers/net/failsafe/failsafe.c
create mode 100644 drivers/net/failsafe/failsafe_args.c
create mode 100644 drivers/net/failsafe/failsafe_eal.c
create mode 100644 drivers/net/failsafe/failsafe_ops.c
create mode 100644 drivers/net/failsafe/failsafe_private.h
create mode 100644 drivers/net/failsafe/failsafe_rxtx.c
create mode 100644 drivers/net/failsafe/rte_pmd_failsafe_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 875bee0..3352c5e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -349,6 +349,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
diff --git a/config/common_base b/config/common_base
index 8ae6e92..7805605 100644
--- a/config/common_base
+++ b/config/common_base
@@ -420,6 +420,11 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
new file mode 100644
index 0000000..c20696e
--- /dev/null
+++ b/doc/guides/nics/fail_safe.rst
@@ -0,0 +1,163 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation option
+------------------
+
+This option can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to any ``-w`` device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. To build a PMD and configure DPDK, refer to the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`.
+
+#. Start testpmd. The slave device should be blacklisted from normal EAL
+ operations to avoid probing it twice when in PCI blacklist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -b 84:00.0 -b 00:04.0 -- -i
+
+ If the slave device being used is not blacklisted, it will be probed by the
+ EAL first. When the fail-safe then tries to initialize it the probe operation
+ fails.
+
+ Note that PCI blacklist mode is the default PCI operating mode.
+
+#. Alternatively, it can be used alongside any other device in whitelist mode.
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+ --vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
+ -w 81:00.0 -- -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
+
+Fail-safe glossary
+------------------
+
+Fallback device : Secondary device
+ The fail-safe will fail-over onto this device when the preferred device is
+ absent.
+
+Preferred device : Primary device
+ The first declared sub-device in the fail-safe parameters.
+ When this device is plugged, it is always used as emitting device.
+ It is the main sub-device and is used as target for configuration
+ operations if there is any ambiguity.
+
+Slave
+ In the context of the fail-safe PMD, synonymous to sub-device.
+
+Sub-device
+ A device being utilized by the fail-safe PMD.
+ This is another PMD running underneath the fail-safe PMD.
+ Any sub-device can disappear at any time. The fail-safe will ensure
+ that the device removal happens gracefully.
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
new file mode 100644
index 0000000..cf3e1af
--- /dev/null
+++ b/doc/guides/nics/features/failsafe.ini
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Flow control = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 240d082..17eaaf4 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35ed813..d33c959 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
new file mode 100644
index 0000000..f940c14
--- /dev/null
+++ b/drivers/net/failsafe/Makefile
@@ -0,0 +1,58 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+EXPORT_MAP := rte_pmd_failsafe_version.map
+
+LIBABIVER := 1
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# Basic CFLAGS:
+CFLAGS += -std=c11 -Wextra
+CFLAGS += -O3
+CFLAGS += -I.
+CFLAGS += -D_DEFAULT_SOURCE
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
new file mode 100644
index 0000000..806c305
--- /dev/null
+++ b/drivers/net/failsafe/failsafe.c
@@ -0,0 +1,225 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_alloc(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u", socket_id);
+ params = rte_vdev_device_args(vdev);
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ return -1;
+ }
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = PRIV(dev);
+ priv->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ ret = fs_sub_device_alloc(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
new file mode 100644
index 0000000..bde8f2d
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -0,0 +1,327 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg = 0;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count > 0) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) != 0) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
new file mode 100644
index 0000000..a74edea
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -0,0 +1,138 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_devargs *da;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ da = &sdev->devargs;
+ ret = rte_eal_hotplug_add(da->bus->name,
+ da->name,
+ da->args);
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ rte_errno ? "(" : "",
+ rte_errno ? strerror(rte_errno) : "",
+ rte_errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = rte_eth_dev_allocated(da->name);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->dev->name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
new file mode 100644
index 0000000..2d9e057
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -0,0 +1,662 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ RTE_ASSERT(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
new file mode 100644
index 0000000..62b5e24
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -0,0 +1,208 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_STATE(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_STATE(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define DEBUG(...) LOG_(DEBUG, __VA_ARGS__)
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, __VA_ARGS__)
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
new file mode 100644
index 0000000..a45b4e5
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/rte_pmd_failsafe_version.map
new file mode 100644
index 0000000..b6d2840
--- /dev/null
+++ b/drivers/net/failsafe/rte_pmd_failsafe_version.map
@@ -0,0 +1,4 @@
+DPDK_17.08 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 5bb4290..c25fdd9 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -121,6 +121,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 04/11] net/failsafe: add plug-in support
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (2 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 03/11] net/failsafe: add fail-safe PMD Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 05/11] net/failsafe: add flexible device definition Gaetan Rivet
` (7 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 23 ++++
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 71 ++++++++++
drivers/net/failsafe/failsafe_args.c | 32 +++++
drivers/net/failsafe/failsafe_eal.c | 30 +----
drivers/net/failsafe/failsafe_ether.c | 228 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 25 ++--
drivers/net/failsafe/failsafe_private.h | 60 ++++++++-
8 files changed, 428 insertions(+), 42 deletions(-)
create mode 100644 drivers/net/failsafe/failsafe_ether.c
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index c20696e..0005892 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -98,6 +98,11 @@ Fail-safe command line parameters
address is generated, that will be subsequently applied to all sub-device once
they are probed.
+- **hotplug_poll** parameter [UINT64] (default **2000**)
+
+ This parameter allows the user to configure the amount of time in milliseconds
+ between two slave upkeep round.
+
Usage example
~~~~~~~~~~~~~
@@ -140,6 +145,20 @@ access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
over ethernet devices, instead of directly accessing them or by writing one's
own device iterator.
+Plug-in feature
+---------------
+
+A sub-device can be defined without existing on the system when the fail-safe
+PMD is initialized. Upon probing this device, the fail-safe PMD will detect its
+absence and postpone its use. It will then register for a periodic check on any
+missing sub-device.
+
+During this time, the fail-safe PMD can be used normally, configured and told to
+emit and receive packets. It will store any applied configuration, and try to
+apply it upon the probing of its missing sub-device. After this configuration
+pass, the new sub-device will be synchronized with other sub-devices, i.e. be
+started if the fail-safe PMD has been started by the user before.
+
Fail-safe glossary
------------------
@@ -153,6 +172,10 @@ Preferred device : Primary device
It is the main sub-device and is used as target for configuration
operations if there is any ambiguity.
+Upkeep round
+ Periodical process when slaves are serviced. Each devices having a state
+ different to that of the fail-safe device itself, is synchronized with it.
+
Slave
In the context of the fail-safe PMD, synonymous to sub-device.
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index f940c14..3488198 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 806c305..8db6355 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -81,6 +81,72 @@ fs_sub_device_free(struct rte_eth_dev *dev)
rte_free(PRIV(dev)->subs);
}
+static void fs_hotplug_alarm(void *arg);
+
+int
+failsafe_hotplug_alarm_install(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ if (dev == NULL)
+ return -EINVAL;
+ if (PRIV(dev)->pending_alarm)
+ return 0;
+ ret = rte_eal_alarm_set(hotplug_poll * 1000,
+ fs_hotplug_alarm,
+ dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ return ret;
+ }
+ PRIV(dev)->pending_alarm = 1;
+ return 0;
+}
+
+int
+failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev)
+{
+ int ret = 0;
+
+ if (PRIV(dev)->pending_alarm) {
+ rte_errno = 0;
+ rte_eal_alarm_cancel(fs_hotplug_alarm, dev);
+ if (rte_errno) {
+ ERROR("rte_eal_alarm_cancel failed (errno: %s)",
+ strerror(rte_errno));
+ ret = -rte_errno;
+ } else {
+ PRIV(dev)->pending_alarm = 0;
+ }
+ }
+ return ret;
+}
+
+static void
+fs_hotplug_alarm(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ if (!PRIV(dev)->pending_alarm)
+ return;
+ PRIV(dev)->pending_alarm = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ break;
+ /* if we have non-probed device */
+ if (i != PRIV(dev)->subs_tail) {
+ ret = failsafe_eth_dev_state_sync(dev);
+ if (ret)
+ ERROR("Unable to synchronize sub_device state");
+ }
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret)
+ ERROR("Unable to set up next alarm");
+}
+
static int
fs_eth_dev_create(struct rte_vdev_device *vdev)
{
@@ -126,6 +192,11 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
ret = failsafe_eal_init(dev);
if (ret)
goto free_args;
+ ret = failsafe_hotplug_alarm_install(dev);
+ if (ret) {
+ ERROR("Could not set up plug-in event detection");
+ goto free_args;
+ }
mac = &dev->data->mac_addrs[0];
if (mac_from_arg) {
/*
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index bde8f2d..733344e 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -32,6 +32,7 @@
*/
#include <string.h>
+#include <errno.h>
#include <rte_devargs.h>
#include <rte_malloc.h>
@@ -45,9 +46,11 @@
typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
uint8_t head);
+uint64_t hotplug_poll = FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS;
int mac_from_arg = 0;
const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_HOTPLUG_POLL_KVARG,
PMD_FAILSAFE_MAC_KVARG,
NULL,
};
@@ -221,6 +224,24 @@ fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
}
static int
+fs_get_u64_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ uint64_t *u64 = out;
+ char *endptr = NULL;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ errno = 0;
+ *u64 = strtoull(value, &endptr, 0);
+ if (errno != 0)
+ return -errno;
+ if (endptr == value)
+ return -1;
+ return 0;
+}
+
+static int
fs_get_mac_addr_arg(const char *key __rte_unused,
const char *value, void *out)
{
@@ -271,6 +292,16 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
PMD_FAILSAFE_PARAM_STRING);
return -1;
}
+ /* PLUG_IN event poll timer */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_HOTPLUG_POLL_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_HOTPLUG_POLL_KVARG,
+ &fs_get_u64_arg, &hotplug_poll);
+ if (ret < 0)
+ goto free_kvlist;
+ }
/* MAC addr */
arg_count = rte_kvargs_count(kvlist,
PMD_FAILSAFE_MAC_KVARG);
@@ -284,6 +315,7 @@ failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
mac_from_arg = 1;
}
}
+ PRIV(dev)->state = DEV_PARSED;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index a74edea..8a3836c 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -72,37 +72,14 @@ fs_bus_init(struct rte_eth_dev *dev)
int
failsafe_eal_init(struct rte_eth_dev *dev)
{
- struct sub_device *sdev;
- uint8_t i;
int ret;
ret = fs_bus_init(dev);
if (ret)
return ret;
- /*
- * We only update TX_SUBDEV if we are not started.
- * If a sub_device is emitting, we will switch the TX_SUBDEV to the
- * preferred port only upon starting it, so that the switch is smoother.
- */
- if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
- TX_SUBDEV(dev) == NULL) {
- /* Using first probed device */
- FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
- DEBUG("Switching tx_dev to sub_device %d",
- i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_PROBED)
+ PRIV(dev)->state = DEV_PROBED;
+ fs_switch_dev(dev);
return 0;
}
@@ -134,5 +111,6 @@ failsafe_eal_uninit(struct rte_eth_dev *dev)
ret = fs_bus_uninit(dev);
if (ret)
return ret;
+ PRIV(dev)->state = DEV_PROBED - 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
new file mode 100644
index 0000000..7910952
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+
+#include "failsafe_private.h"
+
+static int
+fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev *edev;
+ struct rte_vlan_filter_conf *vfc1;
+ struct rte_vlan_filter_conf *vfc2;
+ uint32_t i;
+ int ret;
+
+ edev = ETH(sdev);
+ /* RX queue setup */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct rxq *rxq;
+
+ rxq = dev->data->rx_queues[i];
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev), i,
+ rxq->info.nb_desc, rxq->socket_id,
+ &rxq->info.conf, rxq->info.mp);
+ if (ret) {
+ ERROR("rx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* TX queue setup */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct txq *txq;
+
+ txq = dev->data->tx_queues[i];
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev), i,
+ txq->info.nb_desc, txq->socket_id,
+ &txq->info.conf);
+ if (ret) {
+ ERROR("tx_queue_setup failed");
+ return ret;
+ }
+ }
+ /* dev_link.link_status */
+ if (dev->data->dev_link.link_status !=
+ edev->data->dev_link.link_status) {
+ DEBUG("Configuring link_status");
+ if (dev->data->dev_link.link_status)
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ else
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Failed to apply link_status");
+ return ret;
+ }
+ } else {
+ DEBUG("link_status already set");
+ }
+ /* promiscuous */
+ if (dev->data->promiscuous != edev->data->promiscuous) {
+ DEBUG("Configuring promiscuous");
+ if (dev->data->promiscuous)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+ else
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("promiscuous already set");
+ }
+ /* all_multicast */
+ if (dev->data->all_multicast != edev->data->all_multicast) {
+ DEBUG("Configuring all_multicast");
+ if (dev->data->all_multicast)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+ else
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+ } else {
+ DEBUG("all_multicast already set");
+ }
+ /* MTU */
+ if (dev->data->mtu != edev->data->mtu) {
+ DEBUG("Configuring MTU");
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), dev->data->mtu);
+ if (ret) {
+ ERROR("Failed to apply MTU");
+ return ret;
+ }
+ } else {
+ DEBUG("MTU already set");
+ }
+ /* default MAC */
+ DEBUG("Configuring default MAC address");
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ &dev->data->mac_addrs[0]);
+ if (ret) {
+ ERROR("Setting default MAC address failed");
+ return ret;
+ }
+ /* additional MAC */
+ if (PRIV(dev)->nb_mac_addr > 1)
+ DEBUG("Configure additional MAC address%s",
+ (PRIV(dev)->nb_mac_addr > 2 ? "es" : ""));
+ for (i = 1; i < PRIV(dev)->nb_mac_addr; i++) {
+ struct ether_addr *ea;
+
+ ea = &dev->data->mac_addrs[i];
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), ea,
+ PRIV(dev)->mac_addr_pool[i]);
+ if (ret) {
+ char ea_fmt[ETHER_ADDR_FMT_SIZE];
+
+ ether_format_addr(ea_fmt, ETHER_ADDR_FMT_SIZE, ea);
+ ERROR("Adding MAC address %s failed", ea_fmt);
+ }
+ }
+ /* VLAN filter */
+ vfc1 = &dev->data->vlan_filter_conf;
+ vfc2 = &edev->data->vlan_filter_conf;
+ if (memcmp(vfc1, vfc2, sizeof(struct rte_vlan_filter_conf))) {
+ uint64_t vbit;
+ uint64_t ids;
+ size_t i;
+ uint16_t vlan_id;
+
+ DEBUG("Configuring VLAN filter");
+ for (i = 0; i < RTE_DIM(vfc1->ids); i++) {
+ if (vfc1->ids[i] == 0)
+ continue;
+ ids = vfc1->ids[i];
+ while (ids) {
+ vlan_id = 64 * i;
+ /* count trailing zeroes */
+ vbit = ~ids & (ids - 1);
+ /* clear least significant bit set */
+ ids ^= (ids ^ (ids - 1)) ^ vbit;
+ for (; vbit; vlan_id++)
+ vbit >>= 1;
+ ret = rte_eth_dev_vlan_filter(
+ PORT_ID(sdev), vlan_id, 1);
+ if (ret) {
+ ERROR("Failed to apply VLAN filter %hu",
+ vlan_id);
+ return ret;
+ }
+ }
+ }
+ } else {
+ DEBUG("VLAN filter already set");
+ }
+ return 0;
+}
+
+int
+failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint32_t inactive;
+ int ret;
+ uint8_t i;
+
+ if (PRIV(dev)->state < DEV_PROBED)
+ return 0;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ return 0;
+ inactive = 0;
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state == DEV_PROBED)
+ inactive |= UINT32_C(1) << i;
+ ret = dev->dev_ops->dev_configure(dev);
+ if (ret)
+ return ret;
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (inactive & (UINT32_C(1) << i)) {
+ ret = fs_eth_dev_conf_apply(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ /* TODO: disable device */
+ return ret;
+ }
+ }
+ }
+ /*
+ * If new devices have been configured, check if
+ * the link state has changed.
+ */
+ if (inactive)
+ dev->dev_ops->link_update(dev, 1);
+ if (PRIV(dev)->state < DEV_STARTED)
+ return 0;
+ ret = dev->dev_ops->dev_start(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 2d9e057..fdef019 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -89,6 +89,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
sdev->state = DEV_ACTIVE;
}
+ if (PRIV(dev)->state < DEV_ACTIVE)
+ PRIV(dev)->state = DEV_ACTIVE;
return 0;
}
@@ -108,21 +110,9 @@ fs_dev_start(struct rte_eth_dev *dev)
return ret;
sdev->state = DEV_STARTED;
}
- if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
- DEBUG("Switching tx_dev to preferred sub_device");
- PRIV(dev)->subs_tx = 0;
- }
- } else {
- if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
- TX_SUBDEV(dev) == NULL) {
- FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
- DEBUG("Switching tx_dev to sub_device %d", i);
- PRIV(dev)->subs_tx = i;
- break;
- }
- }
- }
+ if (PRIV(dev)->state < DEV_STARTED)
+ PRIV(dev)->state = DEV_STARTED;
+ fs_switch_dev(dev);
return 0;
}
@@ -132,6 +122,7 @@ fs_dev_stop(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ PRIV(dev)->state = DEV_STARTED - 1;
FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_STARTED) {
rte_eth_dev_stop(PORT_ID(sdev));
sdev->state = DEV_STARTED - 1;
@@ -183,6 +174,10 @@ fs_dev_close(struct rte_eth_dev *dev)
struct sub_device *sdev;
uint8_t i;
+ failsafe_hotplug_alarm_cancel(dev);
+ if (PRIV(dev)->state == DEV_STARTED)
+ dev->dev_ops->dev_stop(dev);
+ PRIV(dev)->state = DEV_ACTIVE - 1;
FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
DEBUG("Closing sub_device %d", i);
rte_eth_dev_close(PORT_ID(sdev));
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 62b5e24..a46d1ea 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -41,11 +41,15 @@
#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_HOTPLUG_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
- "mac=mac_addr" \
+ "mac=mac_addr," \
+ "hotplug_poll=u64" \
""
+#define FAILSAFE_HOTPLUG_DEFAULT_TIMEOUT_MS 2000
+
#define FAILSAFE_MAX_ETHPORTS 2
#define FAILSAFE_MAX_ETHADDR 128
@@ -103,8 +107,22 @@ struct fs_priv {
uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
/* current capabilities */
struct rte_eth_dev_info infos;
+ /*
+ * Fail-safe state machine.
+ * This level will be tracking state of the EAL and eth
+ * layer at large as defined by the user application.
+ * It will then steer the sub_devices toward the same
+ * synchronized state.
+ */
+ enum dev_state state;
+ unsigned int pending_alarm:1; /* An alarm is pending */
};
+/* MISC */
+
+int failsafe_hotplug_alarm_install(struct rte_eth_dev *dev);
+int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
+
/* RX / TX */
uint16_t failsafe_rx_burst(void *rxq,
@@ -123,10 +141,15 @@ int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
int failsafe_eal_init(struct rte_eth_dev *dev);
int failsafe_eal_uninit(struct rte_eth_dev *dev);
+/* ETH_DEV */
+
+int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+
/* GLOBALS */
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern uint64_t hotplug_poll;
extern int mac_from_arg;
/* HELPERS */
@@ -205,4 +228,39 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+static inline void
+fs_switch_dev(struct rte_eth_dev *dev)
+{
+ enum dev_state req_state;
+
+ req_state = PRIV(dev)->state;
+ if (PREFERRED_SUBDEV(dev)->state >= req_state) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (req_state == DEV_STARTED) ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
+ TX_SUBDEV(dev) == NULL) {
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* Using acceptable device */
+ FOREACH_SUBDEV_STATE(sdev, i, dev, req_state) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ DEBUG("No device ready, deactivating tx_dev");
+ PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
+ } else {
+ return;
+ }
+ rte_wmb();
+}
+
#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 05/11] net/failsafe: add flexible device definition
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (3 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 04/11] net/failsafe: add plug-in support Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 06/11] net/failsafe: support flow API Gaetan Rivet
` (6 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 20 +++++++
drivers/net/failsafe/failsafe_args.c | 98 ++++++++++++++++++++++++++++++++-
drivers/net/failsafe/failsafe_ether.c | 7 +++
drivers/net/failsafe/failsafe_private.h | 4 ++
4 files changed, 128 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 0005892..c81f06a 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -87,6 +87,19 @@ Fail-safe command line parameters
additional sub-device parameters if need be. They will be passed on to the
sub-device.
+- **exec(<shell command>)** parameter
+
+ This parameter allows the user to provide a command to the fail-safe PMD to
+ execute and define a sub-device.
+ It is done within a regular shell context.
+ The first line of its output is read by the fail-safe PMD and otherwise
+ interpreted as if passed by the regular **dev** parameter.
+ Any other line is discarded.
+ If the command fail or output an incorrect string, the sub-device is not
+ initialized.
+ All commas within the ``shell command`` are replaced by spaces before
+ executing the command. This helps using scripts to specify devices.
+
- **mac** parameter [MAC address]
This parameter allows the user to set a default MAC address to the fail-safe
@@ -134,6 +147,13 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
--vdev 'net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0)'
-w 81:00.0 -- -i
+#. Start testpmd using a flexible device definition
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
+
Using the Fail-safe PMD from an application
-------------------------------------------
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index 733344e..ec3db55 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -34,6 +34,7 @@
#include <string.h>
#include <errno.h>
+#include <rte_debug.h>
#include <rte_devargs.h>
#include <rte_malloc.h>
#include <rte_kvargs.h>
@@ -97,6 +98,72 @@ fs_parse_device(struct sub_device *sdev, char *args)
return 0;
}
+static void
+fs_sanitize_cmdline(char *args)
+{
+ size_t len;
+
+ len = strnlen(args, DEVARGS_MAXLEN);
+ args[len - 1] = '\0';
+}
+
+static int
+fs_execute_cmd(struct sub_device *sdev, char *cmdline)
+{
+ FILE *fp;
+ /* store possible newline as well */
+ char output[DEVARGS_MAXLEN + 1];
+ size_t len;
+ int old_err;
+ int ret;
+
+ RTE_ASSERT(cmdline != NULL || sdev->cmdline != NULL);
+ if (sdev->cmdline == NULL) {
+ size_t i;
+
+ len = strlen(cmdline) + 1;
+ sdev->cmdline = calloc(1, len);
+ if (sdev->cmdline == NULL) {
+ ERROR("Command line allocation failed");
+ return -ENOMEM;
+ }
+ snprintf(sdev->cmdline, len, "%s", cmdline);
+ /* Replace all commas in the command line by spaces */
+ for (i = 0; i < len; i++)
+ if (sdev->cmdline[i] == ',')
+ sdev->cmdline[i] = ' ';
+ }
+ DEBUG("'%s'", sdev->cmdline);
+ old_err = errno;
+ fp = popen(sdev->cmdline, "r");
+ if (fp == NULL) {
+ ret = errno;
+ ERROR("popen: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ /* We only read one line */
+ if (fgets(output, sizeof(output) - 1, fp) == NULL) {
+ DEBUG("Could not read command output");
+ return -ENODEV;
+ }
+ fs_sanitize_cmdline(output);
+ ret = fs_parse_device(sdev, output);
+ if (ret) {
+ ERROR("Parsing device '%s' failed", output);
+ goto ret_pclose;
+ }
+ret_pclose:
+ ret = pclose(fp);
+ if (ret) {
+ ret = errno;
+ ERROR("pclose: %s", strerror(errno));
+ errno = old_err;
+ return ret;
+ }
+ return ret;
+}
+
static int
fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
uint8_t head)
@@ -131,6 +198,14 @@ fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
ret = fs_parse_device(sdev, args);
if (ret)
goto free_args;
+ } else if (strncmp(param, "exec", 4) == 0) {
+ ret = fs_execute_cmd(sdev, args);
+ if (ret == -ENODEV) {
+ DEBUG("Reading device info from command line failed");
+ ret = 0;
+ }
+ if (ret)
+ goto free_args;
} else {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
@@ -328,6 +403,8 @@ failsafe_args_free(struct rte_eth_dev *dev)
uint8_t i;
FOREACH_SUBDEV(sdev, i, dev) {
+ rte_free(sdev->cmdline);
+ sdev->cmdline = NULL;
free(sdev->devargs.args);
sdev->devargs.args = NULL;
}
@@ -342,7 +419,8 @@ fs_count_device(struct rte_eth_dev *dev, const char *param,
while (param[b] != '(' &&
param[b] != '\0')
b++;
- if (strncmp(param, "dev", b) != 0) {
+ if (strncmp(param, "dev", b) != 0 &&
+ strncmp(param, "exec", b) != 0) {
ERROR("Unrecognized device type: %.*s", (int)b, param);
return -EINVAL;
}
@@ -357,3 +435,21 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
return fs_parse_sub_devices(fs_count_device,
dev, params);
}
+
+int
+failsafe_args_parse_subs(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret = 0;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state >= DEV_PARSED)
+ continue;
+ if (sdev->cmdline)
+ ret = fs_execute_cmd(sdev, sdev->cmdline);
+ if (ret == 0)
+ sdev->state = DEV_PARSED;
+ }
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 7910952..2a1535e 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -188,6 +188,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
int ret;
uint8_t i;
+ if (PRIV(dev)->state < DEV_PARSED)
+ return 0;
+
+ ret = failsafe_args_parse_subs(dev);
+ if (ret)
+ return ret;
+
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index a46d1ea..2342646 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -44,6 +44,7 @@
#define PMD_FAILSAFE_HOTPLUG_POLL_KVARG "hotplug_poll"
#define PMD_FAILSAFE_PARAM_STRING \
"dev(<ifc>)," \
+ "exec(<shell command>)," \
"mac=mac_addr," \
"hotplug_poll=u64" \
""
@@ -87,6 +88,8 @@ struct sub_device {
struct rte_eth_dev *edev;
/* Device state machine */
enum dev_state state;
+ /* Some device are defined as a command line */
+ char *cmdline;
};
struct fs_priv {
@@ -135,6 +138,7 @@ uint16_t failsafe_tx_burst(void *txq,
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
void failsafe_args_free(struct rte_eth_dev *dev);
int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+int failsafe_args_parse_subs(struct rte_eth_dev *dev);
/* EAL */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 06/11] net/failsafe: support flow API
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (4 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 05/11] net/failsafe: add flexible device definition Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 07/11] net/failsafe: support Rx offload capabilities Gaetan Rivet
` (5 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/Makefile | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_eal.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 70 +++++++++++
drivers/net/failsafe/failsafe_flow.c | 215 ++++++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 29 +++++
drivers/net/failsafe/failsafe_private.h | 18 +++
8 files changed, 336 insertions(+)
create mode 100644 drivers/net/failsafe/failsafe_flow.c
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index cf3e1af..2e802aa 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -13,6 +13,7 @@ Unicast MAC filter = Y
Multicast MAC filter = Y
VLAN filter = Y
Flow control = Y
+Flow API = Y
Packet type parsing = Y
Basic stats = Y
Stats per queue = Y
diff --git a/drivers/net/failsafe/Makefile b/drivers/net/failsafe/Makefile
index 3488198..cec33df 100644
--- a/drivers/net/failsafe/Makefile
+++ b/drivers/net/failsafe/Makefile
@@ -45,6 +45,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ether.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_flow.c
# No exported include files
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 8db6355..12d79ac 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -179,6 +179,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
dev->data->dev_link = eth_link;
PRIV(dev)->nb_mac_addr = 1;
+ TAILQ_INIT(&PRIV(dev)->flow_list);
dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
ret = fs_sub_device_alloc(dev, params);
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 8a3836c..d11ea67 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -62,6 +62,7 @@ fs_bus_init(struct rte_eth_dev *dev)
ERROR("sub_device %d init went wrong", i);
return -ENODEV;
}
+ SUB_ID(sdev) = i;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2a1535e..2958207 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -33,8 +33,46 @@
#include <unistd.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
#include "failsafe_private.h"
+/** Print a message out of a flow error. */
+static int
+fs_flow_complain(struct rte_flow_error *error)
+{
+ static const char *const errstrlist[] = {
+ [RTE_FLOW_ERROR_TYPE_NONE] = "no error",
+ [RTE_FLOW_ERROR_TYPE_UNSPECIFIED] = "cause unspecified",
+ [RTE_FLOW_ERROR_TYPE_HANDLE] = "flow rule (handle)",
+ [RTE_FLOW_ERROR_TYPE_ATTR_GROUP] = "group field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY] = "priority field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_INGRESS] = "ingress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR_EGRESS] = "egress field",
+ [RTE_FLOW_ERROR_TYPE_ATTR] = "attributes structure",
+ [RTE_FLOW_ERROR_TYPE_ITEM_NUM] = "pattern length",
+ [RTE_FLOW_ERROR_TYPE_ITEM] = "specific pattern item",
+ [RTE_FLOW_ERROR_TYPE_ACTION_NUM] = "number of actions",
+ [RTE_FLOW_ERROR_TYPE_ACTION] = "specific action",
+ };
+ const char *errstr;
+ char buf[32];
+ int err = rte_errno;
+
+ if ((unsigned int)error->type >= RTE_DIM(errstrlist) ||
+ !errstrlist[error->type])
+ errstr = "unknown type";
+ else
+ errstr = errstrlist[error->type];
+ ERROR("Caught error type %d (%s): %s%s\n",
+ error->type, errstr,
+ error->cause ? (snprintf(buf, sizeof(buf), "cause: %p, ",
+ error->cause), buf) : "",
+ error->message ? error->message : "(no stated reason)");
+ return -err;
+}
+
static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
@@ -42,6 +80,8 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct rte_eth_dev *edev;
struct rte_vlan_filter_conf *vfc1;
struct rte_vlan_filter_conf *vfc2;
+ struct rte_flow *flow;
+ struct rte_flow_error ferror;
uint32_t i;
int ret;
@@ -177,6 +217,36 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
} else {
DEBUG("VLAN filter already set");
}
+ /* rte_flow */
+ if (TAILQ_EMPTY(&PRIV(dev)->flow_list)) {
+ DEBUG("rte_flow already set");
+ } else {
+ DEBUG("Resetting rte_flow configuration");
+ ret = rte_flow_flush(PORT_ID(sdev), &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ i = 0;
+ rte_errno = 0;
+ DEBUG("Configuring rte_flow");
+ TAILQ_FOREACH(flow, &PRIV(dev)->flow_list, next) {
+ DEBUG("Creating flow #%" PRIu32, i++);
+ flow->flows[SUB_ID(sdev)] =
+ rte_flow_create(PORT_ID(sdev),
+ &flow->fd->attr,
+ flow->fd->items,
+ flow->fd->actions,
+ &ferror);
+ ret = rte_errno;
+ if (ret)
+ break;
+ }
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
new file mode 100644
index 0000000..0098672
--- /dev/null
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -0,0 +1,215 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+
+#include <rte_malloc.h>
+#include <rte_tailq.h>
+#include <rte_flow.h>
+#include <rte_flow_driver.h>
+
+#include "failsafe_private.h"
+
+static struct rte_flow *
+fs_flow_allocate(const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions)
+{
+ struct rte_flow *flow;
+ size_t fdsz;
+
+ fdsz = rte_flow_copy(NULL, 0, attr, items, actions);
+ flow = rte_zmalloc(NULL,
+ sizeof(struct rte_flow) + fdsz,
+ RTE_CACHE_LINE_SIZE);
+ if (flow == NULL) {
+ ERROR("Could not allocate new flow");
+ return NULL;
+ }
+ flow->fd = (void *)((uintptr_t)flow + sizeof(*flow));
+ if (rte_flow_copy(flow->fd, fdsz, attr, items, actions) != fdsz) {
+ ERROR("Failed to copy flow description");
+ rte_free(flow);
+ return NULL;
+ }
+ return flow;
+}
+
+static void
+fs_flow_release(struct rte_flow **flow)
+{
+ rte_free(*flow);
+ *flow = NULL;
+}
+
+static int
+fs_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_validate on sub_device %d", i);
+ ret = rte_flow_validate(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (ret) {
+ ERROR("Operation rte_flow_validate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct rte_flow *
+fs_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item patterns[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ uint8_t i;
+
+ flow = fs_flow_allocate(attr, patterns, actions);
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ flow->flows[i] = rte_flow_create(PORT_ID(sdev),
+ attr, patterns, actions, error);
+ if (flow->flows[i] == NULL) {
+ ERROR("Failed to create flow on sub_device %d",
+ i);
+ goto err;
+ }
+ }
+ TAILQ_INSERT_TAIL(&PRIV(dev)->flow_list, flow, next);
+ return flow;
+err:
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (flow->flows[i] != NULL)
+ rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ }
+ fs_flow_release(&flow);
+ return NULL;
+}
+
+static int
+fs_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (flow == NULL) {
+ ERROR("Invalid flow");
+ return -EINVAL;
+ }
+ ret = 0;
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ int local_ret;
+
+ if (flow->flows[i] == NULL)
+ continue;
+ local_ret = rte_flow_destroy(PORT_ID(sdev),
+ flow->flows[i], error);
+ if (local_ret) {
+ ERROR("Failed to destroy flow on sub_device %d: %d",
+ i, local_ret);
+ if (ret == 0)
+ ret = local_ret;
+ }
+ }
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ return ret;
+}
+
+static int
+fs_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ struct rte_flow *flow;
+ void *tmp;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_flow_flush on sub_device %d", i);
+ ret = rte_flow_flush(PORT_ID(sdev), error);
+ if (ret) {
+ ERROR("Operation rte_flow_flush failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ TAILQ_FOREACH_SAFE(flow, &PRIV(dev)->flow_list, next, tmp) {
+ TAILQ_REMOVE(&PRIV(dev)->flow_list, flow, next);
+ fs_flow_release(&flow);
+ }
+ return 0;
+}
+
+static int
+fs_flow_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ enum rte_flow_action_type type,
+ void *arg,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev != NULL) {
+ return rte_flow_query(PORT_ID(sdev),
+ flow->flows[SUB_ID(sdev)], type, arg, error);
+ }
+ WARN("No active sub_device to query about its flow");
+ return -1;
+}
+
+const struct rte_flow_ops fs_flow_ops = {
+ .validate = fs_flow_validate,
+ .create = fs_flow_create,
+ .destroy = fs_flow_destroy,
+ .flush = fs_flow_flush,
+ .query = fs_flow_query,
+};
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index fdef019..223f26a 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -36,6 +36,7 @@
#include <rte_debug.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
+#include <rte_flow.h>
#include "failsafe_private.h"
@@ -627,6 +628,33 @@ fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
}
+static int
+fs_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type type,
+ enum rte_filter_op op,
+ void *arg)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ if (type == RTE_ETH_FILTER_GENERIC &&
+ op == RTE_ETH_FILTER_GET) {
+ *(const void **)arg = &fs_flow_ops;
+ return 0;
+ }
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
+ ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_filter_ctrl failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
const struct eth_dev_ops failsafe_ops = {
.dev_configure = fs_dev_configure,
.dev_start = fs_dev_start,
@@ -654,4 +682,5 @@ const struct eth_dev_ops failsafe_ops = {
.mac_addr_remove = fs_mac_addr_remove,
.mac_addr_add = fs_mac_addr_add,
.mac_addr_set = fs_mac_addr_set,
+ .filter_ctrl = fs_filter_ctrl,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 2342646..82d969d 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -34,6 +34,8 @@
#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+#include <sys/queue.h>
+
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -72,6 +74,14 @@ struct txq {
struct rte_eth_txq_info info;
};
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next;
+ /* sub_flows */
+ struct rte_flow *flows[FAILSAFE_MAX_ETHPORTS];
+ /* flow description for synchronization */
+ struct rte_flow_desc *fd;
+};
+
enum dev_state {
DEV_UNDEFINED,
DEV_PARSED,
@@ -86,6 +96,7 @@ struct sub_device {
struct rte_bus *bus;
struct rte_device *dev;
struct rte_eth_dev *edev;
+ uint8_t sid;
/* Device state machine */
enum dev_state state;
/* Some device are defined as a command line */
@@ -104,6 +115,8 @@ struct fs_priv {
uint8_t subs_tail; /* first invalid */
uint8_t subs_tx; /* current emitting device */
uint8_t current_probed;
+ /* flow mapping */
+ TAILQ_HEAD(sub_flows, rte_flow) flow_list;
/* current number of mac_addr slots allocated. */
uint32_t nb_mac_addr;
struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
@@ -153,6 +166,7 @@ int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
extern const char pmd_failsafe_driver_name[];
extern const struct eth_dev_ops failsafe_ops;
+extern const struct rte_flow_ops fs_flow_ops;
extern uint64_t hotplug_poll;
extern int mac_from_arg;
@@ -170,6 +184,10 @@ extern int mac_from_arg;
#define PORT_ID(sdev) \
(ETH(sdev)->data->port_id)
+/* sdev: (struct sub_device *) */
+#define SUB_ID(sdev) \
+ ((sdev)->sid)
+
/**
* Stateful iterator construct over fail-safe sub-devices:
* s: (struct sub_device *), iterator
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 07/11] net/failsafe: support Rx offload capabilities
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (5 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 06/11] net/failsafe: support flow API Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 08/11] net/failsafe: add fast burst functions Gaetan Rivet
` (4 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_ops.c | 131 +++++++++++++++++++++++++++++++++++-
1 file changed, 129 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 223f26a..ac3257e 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -63,22 +63,149 @@ static struct rte_eth_dev_info default_infos = {
.nb_seg_max = UINT16_MAX,
.nb_mtu_seg_max = UINT16_MAX,
},
- /* Set of understood capabilities */
- .rx_offload_capa = 0x0,
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ .rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO,
.tx_offload_capa = 0x0,
.flow_type_rss_offloads = 0x0,
};
+/**
+ * Check whether a specific offloading capability
+ * is supported by a sub_device.
+ *
+ * @return
+ * 0: all requested capabilities are supported by the sub_device
+ * positive value: This flag at least is not supported by the sub_device
+ */
+static int
+fs_port_offload_validate(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_eth_dev_info infos = {0};
+ struct rte_eth_conf *cf;
+ uint32_t cap;
+
+ cf = &dev->data->dev_conf;
+ SUBOPS(sdev, dev_infos_get)(ETH(sdev), &infos);
+ /* RX capabilities */
+ cap = infos.rx_offload_capa;
+ if (cf->rxmode.hw_vlan_strip &&
+ ((cap & DEV_RX_OFFLOAD_VLAN_STRIP) == 0)) {
+ WARN("VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
+ if (cf->rxmode.hw_ip_checksum &&
+ ((cap & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM)) !=
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))) {
+ WARN("IP checksum offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM;
+ }
+ if (cf->rxmode.enable_lro &&
+ ((cap & DEV_RX_OFFLOAD_TCP_LRO) == 0)) {
+ WARN("TCP LRO offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_TCP_LRO;
+ }
+ if (cf->rxmode.hw_vlan_extend &&
+ ((cap & DEV_RX_OFFLOAD_QINQ_STRIP) == 0)) {
+ WARN("Stacked VLAN stripping offload requested but not supported by sub_device %d",
+ SUB_ID(sdev));
+ return DEV_RX_OFFLOAD_QINQ_STRIP;
+ }
+ /* TX capabilities */
+ /* Nothing to do, no tx capa supported */
+ return 0;
+}
+
+/*
+ * Disable the dev_conf flag related to an offload capability flag
+ * within an ethdev configuration.
+ */
+static int
+fs_port_disable_offload(struct rte_eth_conf *cf,
+ uint32_t ol_cap)
+{
+ switch (ol_cap) {
+ case DEV_RX_OFFLOAD_VLAN_STRIP:
+ INFO("Disabling VLAN stripping offload");
+ cf->rxmode.hw_vlan_strip = 0;
+ break;
+ case DEV_RX_OFFLOAD_IPV4_CKSUM:
+ case DEV_RX_OFFLOAD_UDP_CKSUM:
+ case DEV_RX_OFFLOAD_TCP_CKSUM:
+ case (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM):
+ INFO("Disabling IP checksum offload");
+ cf->rxmode.hw_ip_checksum = 0;
+ break;
+ case DEV_RX_OFFLOAD_TCP_LRO:
+ INFO("Disabling TCP LRO offload");
+ cf->rxmode.enable_lro = 0;
+ break;
+ case DEV_RX_OFFLOAD_QINQ_STRIP:
+ INFO("Disabling stacked VLAN stripping offload");
+ cf->rxmode.hw_vlan_extend = 0;
+ break;
+ default:
+ DEBUG("Unable to disable offload capability: %" PRIx32,
+ ol_cap);
+ return -1;
+ }
+ return 0;
+}
+
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
struct sub_device *sdev;
uint8_t i;
+ int capa_flag;
int ret;
FOREACH_SUBDEV(sdev, i, dev) {
if (sdev->state != DEV_PROBED)
continue;
+ DEBUG("Checking capabilities for sub_device %d", i);
+ while ((capa_flag = fs_port_offload_validate(dev, sdev))) {
+ /*
+ * Refuse to change configuration if multiple devices
+ * are present and we already have configured at least
+ * some of them.
+ */
+ if (PRIV(dev)->state >= DEV_ACTIVE &&
+ PRIV(dev)->subs_tail > 1) {
+ ERROR("device already configured, cannot fix live configuration");
+ return -1;
+ }
+ ret = fs_port_disable_offload(&dev->data->dev_conf,
+ capa_flag);
+ if (ret) {
+ ERROR("Unable to disable offload capability");
+ return ret;
+ }
+ }
+ }
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
DEBUG("Configuring sub-device %d", i);
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 08/11] net/failsafe: add fast burst functions
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (6 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 07/11] net/failsafe: support Rx offload capabilities Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 09/11] net/failsafe: support device removal Gaetan Rivet
` (3 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
drivers/net/failsafe/failsafe_private.h | 8 +++
drivers/net/failsafe/failsafe_rxtx.c | 123 ++++++++++++++++++++++++++------
2 files changed, 111 insertions(+), 20 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 82d969d..aac4754 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -141,11 +141,18 @@ int failsafe_hotplug_alarm_cancel(struct rte_eth_dev *dev);
/* RX / TX */
+void set_burst_fn(struct rte_eth_dev *dev, int force_safe);
+
uint16_t failsafe_rx_burst(void *rxq,
struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t failsafe_tx_burst(void *txq,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_rx_burst_fast(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst_fast(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
/* ARGS */
int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
@@ -282,6 +289,7 @@ fs_switch_dev(struct rte_eth_dev *dev)
} else {
return;
}
+ set_burst_fn(dev, 0);
rte_wmb();
}
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index a45b4e5..5e380fe 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,16 +31,62 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <rte_debug.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
#include "failsafe_private.h"
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+static inline int
+fs_rx_unsafe(struct sub_device *sdev)
+{
+ return (ETH(sdev) == NULL) ||
+ (ETH(sdev)->rx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+static inline int
+fs_tx_unsafe(struct sub_device *sdev)
+{
+ return (sdev == NULL) ||
+ (ETH(sdev) == NULL) ||
+ (ETH(sdev)->tx_pkt_burst == NULL) ||
+ (sdev->state != DEV_STARTED);
+}
+
+void
+set_burst_fn(struct rte_eth_dev *dev, int force_safe)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int need_safe;
+ int safe_set;
+
+ need_safe = force_safe;
+ FOREACH_SUBDEV(sdev, i, dev)
+ need_safe |= fs_rx_unsafe(sdev);
+ safe_set = (dev->rx_pkt_burst == &failsafe_rx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe RX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->rx_pkt_burst = &failsafe_rx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast RX bursts");
+ dev->rx_pkt_burst = &failsafe_rx_burst_fast;
+ }
+ need_safe = force_safe || fs_tx_unsafe(TX_SUBDEV(dev));
+ safe_set = (dev->tx_pkt_burst == &failsafe_tx_burst);
+ if (need_safe && !safe_set) {
+ DEBUG("Using safe TX bursts%s",
+ (force_safe ? " (forced)" : ""));
+ dev->tx_pkt_burst = &failsafe_tx_burst;
+ } else if (!need_safe && safe_set) {
+ DEBUG("Using fast TX bursts");
+ dev->tx_pkt_burst = &failsafe_tx_burst_fast;
+ }
+ rte_wmb();
+}
+
uint16_t
failsafe_rx_burst(void *queue,
struct rte_mbuf **rx_pkts,
@@ -63,11 +109,7 @@ failsafe_rx_burst(void *queue,
if (i == priv->subs_tail)
i = priv->subs_head;
sdev = &priv->subs[i];
- if (unlikely(ETH(sdev) == NULL))
- continue;
- if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
- continue;
- if (unlikely(sdev->state != DEV_STARTED))
+ if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
nb_rx = ETH(sdev)->
@@ -80,11 +122,40 @@ failsafe_rx_burst(void *queue,
return 0;
}
-/*
- * TODO: write fast version,
- * without additional checks, to be activated once
- * everything has been verified to comply.
- */
+uint16_t
+failsafe_rx_burst_fast(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ RTE_ASSERT(!fs_rx_unsafe(sdev));
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
uint16_t
failsafe_tx_burst(void *queue,
struct rte_mbuf **tx_pkts,
@@ -96,12 +167,24 @@ failsafe_tx_burst(void *queue,
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
- if (unlikely(sdev == NULL))
- return 0;
- if (unlikely(ETH(sdev) == NULL))
- return 0;
- if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
}
+
+uint16_t
+failsafe_tx_burst_fast(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ RTE_ASSERT(!fs_tx_unsafe(sdev));
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 09/11] net/failsafe: support device removal
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (7 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 08/11] net/failsafe: add fast burst functions Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 10/11] net/failsafe: support link status change event Gaetan Rivet
` (2 subsequent siblings)
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
---
doc/guides/nics/fail_safe.rst | 15 ++++++
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_args.c | 13 +++++
drivers/net/failsafe/failsafe_eal.c | 3 +-
drivers/net/failsafe/failsafe_ether.c | 96 ++++++++++++++++++++++++++++++---
drivers/net/failsafe/failsafe_ops.c | 37 +++++++++++--
drivers/net/failsafe/failsafe_private.h | 72 ++++++++++++++++++++++---
drivers/net/failsafe/failsafe_rxtx.c | 17 +++++-
8 files changed, 234 insertions(+), 20 deletions(-)
diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index c81f06a..34ecae2 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -51,6 +51,12 @@ The Fail-safe PMD only supports a limited set of features. If you plan to use a
device underneath the Fail-safe PMD with a specific feature, this feature must
be supported by the Fail-safe PMD to avoid throwing any error.
+A notable exception is the device removal feature. The fail-safe PMD being a
+virtual device, it cannot currently be removed in the sense of a specific bus
+hotplug, like for PCI for example. It will however enable this feature for its
+sub-device automatically, detecting those that are capable and register the
+relevant callback for such event.
+
Check the feature matrix for the complete set of supported features.
Compilation option
@@ -179,6 +185,14 @@ apply it upon the probing of its missing sub-device. After this configuration
pass, the new sub-device will be synchronized with other sub-devices, i.e. be
started if the fail-safe PMD has been started by the user before.
+Plug-out feature
+----------------
+
+A sub-device supporting the device removal event can be removed from its bus at
+any time. The fail-safe PMD will register a callback for such event and react
+accordingly. It will try to safely stop, close and uninit the sub-device having
+emitted this event, allowing it to free its eventual resources.
+
Fail-safe glossary
------------------
@@ -195,6 +209,7 @@ Preferred device : Primary device
Upkeep round
Periodical process when slaves are serviced. Each devices having a state
different to that of the fail-safe device itself, is synchronized with it.
+ Additionally, each slave having the remove flag set are cleaned-up.
Slave
In the context of the fail-safe PMD, synonymous to sub-device.
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 12d79ac..7628c21 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -142,6 +142,7 @@ fs_hotplug_alarm(void *arg)
if (ret)
ERROR("Unable to synchronize sub_device state");
}
+ failsafe_dev_remove(dev);
ret = failsafe_hotplug_alarm_install(dev);
if (ret)
ERROR("Unable to set up next alarm");
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index ec3db55..932e371 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -436,6 +436,17 @@ failsafe_args_count_subdevice(struct rte_eth_dev *dev,
dev, params);
}
+static int
+fs_parse_sub_device(struct sub_device *sdev)
+{
+ struct rte_devargs *da;
+ char devstr[DEVARGS_MAXLEN] = "";
+
+ da = &sdev->devargs;
+ snprintf(devstr, sizeof(devstr), "%s,%s", da->name, da->args);
+ return fs_parse_device(sdev, devstr);
+}
+
int
failsafe_args_parse_subs(struct rte_eth_dev *dev)
{
@@ -448,6 +459,8 @@ failsafe_args_parse_subs(struct rte_eth_dev *dev)
continue;
if (sdev->cmdline)
ret = fs_execute_cmd(sdev, sdev->cmdline);
+ else
+ ret = fs_parse_sub_device(sdev);
if (ret == 0)
sdev->state = DEV_PARSED;
}
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index d11ea67..c8f4318 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -63,6 +63,7 @@ fs_bus_init(struct rte_eth_dev *dev)
return -ENODEV;
}
SUB_ID(sdev) = i;
+ sdev->fs_dev = dev;
sdev->dev = ETH(sdev)->device;
ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
sdev->state = DEV_PROBED;
@@ -80,7 +81,7 @@ failsafe_eal_init(struct rte_eth_dev *dev)
return ret;
if (PRIV(dev)->state < DEV_PROBED)
PRIV(dev)->state = DEV_PROBED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 2958207..359b8c9 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -250,6 +250,67 @@ fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
return 0;
}
+static void
+fs_dev_remove(struct sub_device *sdev)
+{
+ int ret;
+
+ if (sdev == NULL)
+ return;
+ switch (sdev->state) {
+ case DEV_STARTED:
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE;
+ /* fallthrough */
+ case DEV_ACTIVE:
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_PROBED;
+ /* fallthrough */
+ case DEV_PROBED:
+ ret = rte_eal_hotplug_remove(sdev->bus->name,
+ sdev->dev->name);
+ if (ret) {
+ ERROR("Bus detach failed for sub_device %u",
+ SUB_ID(sdev));
+ } else {
+ ETH(sdev)->state = RTE_ETH_DEV_UNUSED;
+ }
+ sdev->state = DEV_PARSED;
+ /* fallthrough */
+ case DEV_PARSED:
+ case DEV_UNDEFINED:
+ sdev->state = DEV_UNDEFINED;
+ /* the end */
+ break;
+ }
+ failsafe_hotplug_alarm_install(sdev->fs_dev);
+}
+
+static inline int
+fs_rxtx_clean(struct sub_device *sdev)
+{
+ uint16_t i;
+
+ for (i = 0; i < ETH(sdev)->data->nb_rx_queues; i++)
+ if (FS_ATOMIC_RX(sdev, i))
+ return 0;
+ for (i = 0; i < ETH(sdev)->data->nb_tx_queues; i++)
+ if (FS_ATOMIC_TX(sdev, i))
+ return 0;
+ return 1;
+}
+
+void
+failsafe_dev_remove(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+ if (sdev->remove && fs_rxtx_clean(sdev))
+ fs_dev_remove(sdev);
+}
+
int
failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
{
@@ -263,13 +324,13 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
ret = failsafe_args_parse_subs(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_PROBED)
return 0;
ret = failsafe_eal_init(dev);
if (ret)
- return ret;
+ goto err_remove;
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
@@ -278,15 +339,14 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
inactive |= UINT32_C(1) << i;
ret = dev->dev_ops->dev_configure(dev);
if (ret)
- return ret;
+ goto err_remove;
FOREACH_SUBDEV(sdev, i, dev) {
if (inactive & (UINT32_C(1) << i)) {
ret = fs_eth_dev_conf_apply(dev, sdev);
if (ret) {
ERROR("Could not apply configuration to sub_device %d",
i);
- /* TODO: disable device */
- return ret;
+ goto err_remove;
}
}
}
@@ -300,6 +360,30 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
return 0;
ret = dev->dev_ops->dev_start(dev);
if (ret)
- return ret;
+ goto err_remove;
+ return 0;
+err_remove:
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state != PRIV(dev)->state)
+ sdev->remove = 1;
+ return ret;
+}
+
+int
+failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct sub_device *sdev = cb_arg;
+
+ /* Switch as soon as possible tx_dev. */
+ fs_switch_dev(sdev->fs_dev, sdev);
+ /* Use safe bursts in any case. */
+ set_burst_fn(sdev->fs_dev, 1);
+ /*
+ * Async removal, the sub-PMD will try to unregister
+ * the callback at the source of the current thread context.
+ */
+ sdev->remove = 1;
return 0;
}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index ac3257e..e8edf15 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -34,6 +34,7 @@
#include <stdint.h>
#include <rte_debug.h>
+#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_flow.h>
@@ -204,9 +205,21 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
}
FOREACH_SUBDEV(sdev, i, dev) {
+ int rmv_interrupt = 0;
+
if (sdev->state != DEV_PROBED)
continue;
+
+ rmv_interrupt = ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV;
+ if (rmv_interrupt) {
+ DEBUG("Enabling RMV interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.rmv = 1;
+ } else {
+ DEBUG("sub_device %d does not support RMV event", i);
+ }
DEBUG("Configuring sub-device %d", i);
+ sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
dev->data->nb_rx_queues,
dev->data->nb_tx_queues,
@@ -215,6 +228,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
ERROR("Could not configure sub_device %d", i);
return ret;
}
+ if (rmv_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_RMV,
+ failsafe_eth_rmv_event_callback,
+ sdev);
+ if (ret)
+ WARN("Failed to register RMV callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.rmv = 0;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
@@ -240,7 +263,7 @@ fs_dev_start(struct rte_eth_dev *dev)
}
if (PRIV(dev)->state < DEV_STARTED)
PRIV(dev)->state = DEV_STARTED;
- fs_switch_dev(dev);
+ fs_switch_dev(dev, NULL);
return 0;
}
@@ -351,10 +374,14 @@ fs_rx_queue_setup(struct rte_eth_dev *dev,
fs_rx_queue_release(rxq);
dev->data->rx_queues[rx_queue_id] = NULL;
}
- rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ rxq = rte_zmalloc(NULL,
+ sizeof(*rxq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (rxq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&rxq->refcnt[i]);
rxq->qid = rx_queue_id;
rxq->socket_id = socket_id;
rxq->info.mp = mb_pool;
@@ -414,10 +441,14 @@ fs_tx_queue_setup(struct rte_eth_dev *dev,
fs_tx_queue_release(txq);
dev->data->tx_queues[tx_queue_id] = NULL;
}
- txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ txq = rte_zmalloc("ethdev TX queue",
+ sizeof(*txq) +
+ sizeof(rte_atomic64_t) * PRIV(dev)->subs_tail,
RTE_CACHE_LINE_SIZE);
if (txq == NULL)
return -ENOMEM;
+ FOREACH_SUBDEV(sdev, i, dev)
+ rte_atomic64_init(&txq->refcnt[i]);
txq->qid = tx_queue_id;
txq->socket_id = socket_id;
txq->info.conf = *tx_conf;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index aac4754..80bbc61 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -36,6 +36,7 @@
#include <sys/queue.h>
+#include <rte_atomic.h>
#include <rte_dev.h>
#include <rte_ethdev.h>
#include <rte_devargs.h>
@@ -65,6 +66,7 @@ struct rxq {
uint8_t last_polled;
unsigned int socket_id;
struct rte_eth_rxq_info info;
+ rte_atomic64_t refcnt[];
};
struct txq {
@@ -72,6 +74,7 @@ struct txq {
uint16_t qid;
unsigned int socket_id;
struct rte_eth_txq_info info;
+ rte_atomic64_t refcnt[];
};
struct rte_flow {
@@ -101,6 +104,10 @@ struct sub_device {
enum dev_state state;
/* Some device are defined as a command line */
char *cmdline;
+ /* fail-safe device backreference */
+ struct rte_eth_dev *fs_dev;
+ /* flag calling for recollection */
+ volatile unsigned int remove:1;
};
struct fs_priv {
@@ -168,6 +175,10 @@ int failsafe_eal_uninit(struct rte_eth_dev *dev);
/* ETH_DEV */
int failsafe_eth_dev_state_sync(struct rte_eth_dev *dev);
+void failsafe_dev_remove(struct rte_eth_dev *dev);
+int failsafe_eth_rmv_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *arg, void *out);
/* GLOBALS */
@@ -233,6 +244,39 @@ extern int mac_from_arg;
#define SUBOPS(s, ops) \
(ETH(s)->dev_ops->ops)
+/**
+ * Atomic guard
+ */
+
+/**
+ * a: (rte_atomic64_t)
+ */
+#define FS_ATOMIC_P(a) \
+ rte_atomic64_add(&(a), 1)
+
+/**
+ * a: (rte_atomic64_t)
+ */
+#define FS_ATOMIC_V(a) \
+ rte_atomic64_sub(&(a), 1)
+
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_RX(s, i) \
+ rte_atomic64_read( \
+ &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
+ )
+/**
+ * s: (struct sub_device *)
+ * i: uint16_t qid
+ */
+#define FS_ATOMIC_TX(s, i) \
+ rte_atomic64_read( \
+ &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
+ )
+
#define LOG__(level, m, ...) \
RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
@@ -257,33 +301,45 @@ fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
return sid;
}
+/*
+ * Switch emitting device.
+ * If banned is set, banned must not be considered for
+ * the role of emitting device.
+ */
static inline void
-fs_switch_dev(struct rte_eth_dev *dev)
+fs_switch_dev(struct rte_eth_dev *dev,
+ struct sub_device *banned)
{
+ struct sub_device *txd;
enum dev_state req_state;
req_state = PRIV(dev)->state;
- if (PREFERRED_SUBDEV(dev)->state >= req_state) {
- if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
- (TX_SUBDEV(dev) == NULL ||
+ txd = TX_SUBDEV(dev);
+ if (PREFERRED_SUBDEV(dev)->state >= req_state &&
+ PREFERRED_SUBDEV(dev) != banned) {
+ if (txd != PREFERRED_SUBDEV(dev) &&
+ (txd == NULL ||
(req_state == DEV_STARTED) ||
- (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ (txd && txd->state < DEV_STARTED))) {
DEBUG("Switching tx_dev to preferred sub_device");
PRIV(dev)->subs_tx = 0;
}
- } else if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) ||
- TX_SUBDEV(dev) == NULL) {
+ } else if ((txd && txd->state < req_state) ||
+ txd == NULL ||
+ txd == banned) {
struct sub_device *sdev;
uint8_t i;
/* Using acceptable device */
FOREACH_SUBDEV_STATE(sdev, i, dev, req_state) {
+ if (sdev == banned)
+ continue;
DEBUG("Switching tx_dev to sub_device %d",
i);
PRIV(dev)->subs_tx = i;
break;
}
- } else if (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < req_state) {
+ } else if (txd && txd->state < req_state) {
DEBUG("No device ready, deactivating tx_dev");
PRIV(dev)->subs_tx = PRIV(dev)->subs_tail;
} else {
diff --git a/drivers/net/failsafe/failsafe_rxtx.c b/drivers/net/failsafe/failsafe_rxtx.c
index 5e380fe..7311421 100644
--- a/drivers/net/failsafe/failsafe_rxtx.c
+++ b/drivers/net/failsafe/failsafe_rxtx.c
@@ -31,6 +31,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <rte_atomic.h>
#include <rte_debug.h>
#include <rte_mbuf.h>
#include <rte_ethdev.h>
@@ -112,8 +113,10 @@ failsafe_rx_burst(void *queue,
if (unlikely(fs_rx_unsafe(sdev)))
continue;
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -146,8 +149,10 @@ failsafe_rx_burst_fast(void *queue,
sdev = &priv->subs[i];
RTE_ASSERT(!fs_rx_unsafe(sdev));
sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ FS_ATOMIC_P(rxq->refcnt[sdev->sid]);
nb_rx = ETH(sdev)->
rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ FS_ATOMIC_V(rxq->refcnt[sdev->sid]);
if (nb_rx) {
rxq->last_polled = i;
return nb_rx;
@@ -164,13 +169,17 @@ failsafe_tx_burst(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
if (unlikely(fs_tx_unsafe(sdev)))
return 0;
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
uint16_t
@@ -181,10 +190,14 @@ failsafe_tx_burst_fast(void *queue,
struct sub_device *sdev;
struct txq *txq;
void *sub_txq;
+ uint16_t nb_tx;
txq = queue;
sdev = TX_SUBDEV(txq->priv->dev);
RTE_ASSERT(!fs_tx_unsafe(sdev));
sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
- return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_P(txq->refcnt[sdev->sid]);
+ nb_tx = ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+ FS_ATOMIC_V(txq->refcnt[sdev->sid]);
+ return nb_tx;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 10/11] net/failsafe: support link status change event
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (8 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 09/11] net/failsafe: support device removal Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 12:48 ` [PATCH v11 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
2017-07-18 16:08 ` [PATCH v11 00/11] introduce fail-safe PMD Ferruh Yigit
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
doc/guides/nics/features/failsafe.ini | 1 +
drivers/net/failsafe/failsafe.c | 1 +
drivers/net/failsafe/failsafe_ether.c | 18 ++++++++++++++++++
drivers/net/failsafe/failsafe_ops.c | 23 +++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 3 +++
5 files changed, 46 insertions(+)
diff --git a/doc/guides/nics/features/failsafe.ini b/doc/guides/nics/features/failsafe.ini
index 2e802aa..a42e344 100644
--- a/doc/guides/nics/features/failsafe.ini
+++ b/doc/guides/nics/features/failsafe.ini
@@ -5,6 +5,7 @@
;
[Features]
Link status = Y
+Link status event = Y
MTU update = Y
Jumbo frame = Y
Promiscuous mode = Y
diff --git a/drivers/net/failsafe/failsafe.c b/drivers/net/failsafe/failsafe.c
index 7628c21..6006bef 100644
--- a/drivers/net/failsafe/failsafe.c
+++ b/drivers/net/failsafe/failsafe.c
@@ -238,6 +238,7 @@ fs_eth_dev_create(struct rte_vdev_device *vdev)
mac->addr_bytes[0], mac->addr_bytes[1],
mac->addr_bytes[2], mac->addr_bytes[3],
mac->addr_bytes[4], mac->addr_bytes[5]);
+ dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
free_args:
failsafe_args_free(dev);
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 359b8c9..d205f61 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -387,3 +387,21 @@ failsafe_eth_rmv_event_callback(uint8_t port_id __rte_unused,
sdev->remove = 1;
return 0;
}
+
+int
+failsafe_eth_lsc_event_callback(uint8_t port_id __rte_unused,
+ enum rte_eth_event_type event __rte_unused,
+ void *cb_arg, void *out __rte_unused)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ int ret;
+
+ ret = dev->dev_ops->link_update(dev, 0);
+ /* We must pass on the LSC event */
+ if (ret)
+ return _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ else
+ return 0;
+}
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index e8edf15..ff9ad15 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -206,6 +206,8 @@ fs_dev_configure(struct rte_eth_dev *dev)
}
FOREACH_SUBDEV(sdev, i, dev) {
int rmv_interrupt = 0;
+ int lsc_interrupt = 0;
+ int lsc_enabled;
if (sdev->state != DEV_PROBED)
continue;
@@ -218,6 +220,17 @@ fs_dev_configure(struct rte_eth_dev *dev)
} else {
DEBUG("sub_device %d does not support RMV event", i);
}
+ lsc_enabled = dev->data->dev_conf.intr_conf.lsc;
+ lsc_interrupt = lsc_enabled &&
+ (ETH(sdev)->data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC);
+ if (lsc_interrupt) {
+ DEBUG("Enabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 1;
+ } else if (lsc_enabled && !lsc_interrupt) {
+ DEBUG("Disabling LSC interrupts for sub_device %d", i);
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ }
DEBUG("Configuring sub-device %d", i);
sdev->remove = 0;
ret = rte_eth_dev_configure(PORT_ID(sdev),
@@ -238,6 +251,16 @@ fs_dev_configure(struct rte_eth_dev *dev)
SUB_ID(sdev));
}
dev->data->dev_conf.intr_conf.rmv = 0;
+ if (lsc_interrupt) {
+ ret = rte_eth_dev_callback_register(PORT_ID(sdev),
+ RTE_ETH_EVENT_INTR_LSC,
+ failsafe_eth_lsc_event_callback,
+ dev);
+ if (ret)
+ WARN("Failed to register LSC callback for sub_device %d",
+ SUB_ID(sdev));
+ }
+ dev->data->dev_conf.intr_conf.lsc = lsc_enabled;
sdev->state = DEV_ACTIVE;
}
if (PRIV(dev)->state < DEV_ACTIVE)
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 80bbc61..2c52d2b 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -179,6 +179,9 @@ void failsafe_dev_remove(struct rte_eth_dev *dev);
int failsafe_eth_rmv_event_callback(uint8_t port_id,
enum rte_eth_event_type type,
void *arg, void *out);
+int failsafe_eth_lsc_event_callback(uint8_t port_id,
+ enum rte_eth_event_type event,
+ void *cb_arg, void *out);
/* GLOBALS */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* [PATCH v11 11/11] net/failsafe: support flow API isolation mode
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (9 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 10/11] net/failsafe: support link status change event Gaetan Rivet
@ 2017-07-18 12:48 ` Gaetan Rivet
2017-07-18 16:08 ` [PATCH v11 00/11] introduce fail-safe PMD Ferruh Yigit
11 siblings, 0 replies; 195+ messages in thread
From: Gaetan Rivet @ 2017-07-18 12:48 UTC (permalink / raw)
To: dev; +Cc: Gaetan Rivet
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
drivers/net/failsafe/failsafe_ether.c | 34 +++++++++++++++++++++++++++++++--
drivers/net/failsafe/failsafe_flow.c | 29 ++++++++++++++++++++++++++++
drivers/net/failsafe/failsafe_private.h | 4 ++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index d205f61..a3a8cce 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -74,6 +74,28 @@ fs_flow_complain(struct rte_flow_error *error)
}
static int
+eth_dev_flow_isolate_set(struct rte_eth_dev *dev,
+ struct sub_device *sdev)
+{
+ struct rte_flow_error ferror;
+ int ret;
+
+ if (!PRIV(dev)->flow_isolated) {
+ DEBUG("Flow isolation already disabled");
+ } else {
+ DEBUG("Enabling flow isolation");
+ ret = rte_flow_isolate(PORT_ID(sdev),
+ PRIV(dev)->flow_isolated,
+ &ferror);
+ if (ret) {
+ fs_flow_complain(&ferror);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
fs_eth_dev_conf_apply(struct rte_eth_dev *dev,
struct sub_device *sdev)
{
@@ -334,9 +356,17 @@ failsafe_eth_dev_state_sync(struct rte_eth_dev *dev)
if (PRIV(dev)->state < DEV_ACTIVE)
return 0;
inactive = 0;
- FOREACH_SUBDEV(sdev, i, dev)
- if (sdev->state == DEV_PROBED)
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state == DEV_PROBED) {
inactive |= UINT32_C(1) << i;
+ ret = eth_dev_flow_isolate_set(dev, sdev);
+ if (ret) {
+ ERROR("Could not apply configuration to sub_device %d",
+ i);
+ goto err_remove;
+ }
+ }
+ }
ret = dev->dev_ops->dev_configure(dev);
if (ret)
goto err_remove;
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index 0098672..153ceee 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -206,10 +206,39 @@ fs_flow_query(struct rte_eth_dev *dev,
return -1;
}
+static int
+fs_flow_isolate(struct rte_eth_dev *dev,
+ int set,
+ struct rte_flow_error *error)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state < DEV_PROBED)
+ continue;
+ DEBUG("Calling rte_flow_isolate on sub_device %d", i);
+ if (PRIV(dev)->flow_isolated != sdev->flow_isolated)
+ WARN("flow isolation mode of sub_device %d in incoherent state.",
+ i);
+ ret = rte_flow_isolate(PORT_ID(sdev), set, error);
+ if (ret) {
+ ERROR("Operation rte_flow_isolate failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ sdev->flow_isolated = set;
+ }
+ PRIV(dev)->flow_isolated = set;
+ return 0;
+}
+
const struct rte_flow_ops fs_flow_ops = {
.validate = fs_flow_validate,
.create = fs_flow_create,
.destroy = fs_flow_destroy,
.flush = fs_flow_flush,
.query = fs_flow_query,
+ .isolate = fs_flow_isolate,
};
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 2c52d2b..0361cf4 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -108,6 +108,8 @@ struct sub_device {
struct rte_eth_dev *fs_dev;
/* flag calling for recollection */
volatile unsigned int remove:1;
+ /* flow isolation state */
+ int flow_isolated:1;
};
struct fs_priv {
@@ -139,6 +141,8 @@ struct fs_priv {
*/
enum dev_state state;
unsigned int pending_alarm:1; /* An alarm is pending */
+ /* flow isolation state */
+ int flow_isolated:1;
};
/* MISC */
--
2.1.4
^ permalink raw reply related [flat|nested] 195+ messages in thread* Re: [PATCH v11 00/11] introduce fail-safe PMD
2017-07-18 12:48 ` [PATCH v11 00/11] introduce fail-safe PMD Gaetan Rivet
` (10 preceding siblings ...)
2017-07-18 12:48 ` [PATCH v11 11/11] net/failsafe: support flow API isolation mode Gaetan Rivet
@ 2017-07-18 16:08 ` Ferruh Yigit
2017-08-03 13:00 ` Ferruh Yigit
11 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-07-18 16:08 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/18/2017 1:48 PM, Gaetan Rivet wrote:
> This PMD intercepts and manages Ethernet device removal events issued by
> slave PMDs and re-initializes them transparently when brought back so that
> existing applications do not need to be modified to benefit from true
> hot-plugging support.
>
> The stacked PMD approach shares many similarities with the bonding PMD but
> with a different purpose. While bonding provides the ability to group
> several links into a single logical device for enhanced throughput and
> supports fail-over at link level, this one manages the sudden disappearance
> of the underlying device; it guarantees applications face a valid device in
> working order at all times.
>
> Each fail-safe instance is configured to run atop one or several
> devices, with one defined as the preferred device. Hot-plug events are
> handled on all of them, and Tx is always directed to the preferred device
> if present or to the next available failover device (Rx is always performed
> on all devices for simplicity).
>
> Moreover, the configured slaves (preferred or failover) do not need to be
> present at initialization time and may appear later.
>
> Slaves configuration is continuously synchronized with that of the virtual
> device, which exposes their common set of capabilities to the application.
> Failure to apply the current configuration state to a slave for any reason
> simply reschedules its initialization.
>
> This patchset depends on:
>
> [dpdk-dev] [PATCH v4 0/8] fix hotplug API
> http://dpdk.org/ml/archives/dev/2017-July/071340.html
>
> v1 --> v2:
>
> - Wrote documentation
> - Fixed commit logs, signed-off-by
> - Added LSC event support
> - A few minor fixes
>
> v2 --> v3:
>
> - Numerous bug fixes.
> - Complete sub-EAL rework to follow new bus API.
> - burst protection on sub removal.
> - more flexible sub definition.
> - flow isolated mode support.
>
> v3 --> v4:
>
> - Split back commits
> net/failsafe: add fast burst functions
> net/failsafe: support device removal
> That were squashed by error during a rebase
> - Fix segfault on port plugin
> - Fix isolate mode support for MLX4 ports plugin
>
> v4 --> v5:
>
> - Follow new plug / unplug API.
>
> v5 --> v6:
>
> - Follow new hotplug API.
> - Improve usability of hotplug API.
> - Fix rte_dev hotplug API implementation.
> - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
> - Use it to clean up resources on hotplug_remove.
> - Fix hotplug implementation and support un pci bus.
> The scan was not idempotent, nor clean.
> Neither were the device fields.
> - Implement plug operation for vdev bus.
> This is needed for hotplug support and to make the EAL
> independent from vdev-specific API.
> - Remove useless parameters from plug / unplug API.
>
> This patchset is fairly big and complex. The hotplug API has been rushed and
> has never been tested outside of the special case of vdev bus.
>
> These evolutions are proposed alongside this PMD as only this PMD allows to test
> this API at the moment, and without those evolutions this PMD cannot be used.
>
> v6 --> v7
>
> - Split the series in three, with
> vlan filter configuration store standing alone
> Hotplug API fixes separated
> Fail-safe PMD on its own.
>
> These changes should ease integration.
>
> v7 --> v8
>
> - Fix usage examples in documentation.
> - Use rte_eth_dev_allocated when relevant.
>
> v8 --> v9
>
> - Use calloc instead of rte_realloc for command line parsing.
> - Include errno only when necessary.
>
> v9 --> v10
>
> - Fix rte_flow description double-free issue.
> Thanks Raslan for finding the issue :)
> - Use RTE_ASSERT instead of assert.
> Integrate the debug log of the fail-safe to
> RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
> - Remove devices post-state-sync during slave upkeep,
> to avoid a useless early probe attempt.
>
> v10 --> v11
>
> - Added Glossary in documentation.
> - Fixed issues oulined in [1].
> - Removed Rx offload advertizement in feature matrix.
>
> [1]: http://dpdk.org/ml/archives/dev/2017-July/071406.html
>
> Gaetan Rivet (11):
> ethdev: add deferred intermediate device state
> ethdev: count devices consistently
> net/failsafe: add fail-safe PMD
> net/failsafe: add plug-in support
> net/failsafe: add flexible device definition
> net/failsafe: support flow API
> net/failsafe: support Rx offload capabilities
> net/failsafe: add fast burst functions
> net/failsafe: support device removal
> net/failsafe: support link status change event
> net/failsafe: support flow API isolation mode
Series applied to dpdk-next-net/master, thanks.
^ permalink raw reply [flat|nested] 195+ messages in thread* Re: [PATCH v11 00/11] introduce fail-safe PMD
2017-07-18 16:08 ` [PATCH v11 00/11] introduce fail-safe PMD Ferruh Yigit
@ 2017-08-03 13:00 ` Ferruh Yigit
2017-08-03 13:49 ` Gaëtan Rivet
0 siblings, 1 reply; 195+ messages in thread
From: Ferruh Yigit @ 2017-08-03 13:00 UTC (permalink / raw)
To: Gaetan Rivet, dev
On 7/18/2017 5:08 PM, Ferruh Yigit wrote:
> On 7/18/2017 1:48 PM, Gaetan Rivet wrote:
>> This PMD intercepts and manages Ethernet device removal events issued by
>> slave PMDs and re-initializes them transparently when brought back so that
>> existing applications do not need to be modified to benefit from true
>> hot-plugging support.
>>
>> The stacked PMD approach shares many similarities with the bonding PMD but
>> with a different purpose. While bonding provides the ability to group
>> several links into a single logical device for enhanced throughput and
>> supports fail-over at link level, this one manages the sudden disappearance
>> of the underlying device; it guarantees applications face a valid device in
>> working order at all times.
>>
>> Each fail-safe instance is configured to run atop one or several
>> devices, with one defined as the preferred device. Hot-plug events are
>> handled on all of them, and Tx is always directed to the preferred device
>> if present or to the next available failover device (Rx is always performed
>> on all devices for simplicity).
>>
>> Moreover, the configured slaves (preferred or failover) do not need to be
>> present at initialization time and may appear later.
>>
>> Slaves configuration is continuously synchronized with that of the virtual
>> device, which exposes their common set of capabilities to the application.
>> Failure to apply the current configuration state to a slave for any reason
>> simply reschedules its initialization.
>>
>> This patchset depends on:
>>
>> [dpdk-dev] [PATCH v4 0/8] fix hotplug API
>> http://dpdk.org/ml/archives/dev/2017-July/071340.html
>>
>> v1 --> v2:
>>
>> - Wrote documentation
>> - Fixed commit logs, signed-off-by
>> - Added LSC event support
>> - A few minor fixes
>>
>> v2 --> v3:
>>
>> - Numerous bug fixes.
>> - Complete sub-EAL rework to follow new bus API.
>> - burst protection on sub removal.
>> - more flexible sub definition.
>> - flow isolated mode support.
>>
>> v3 --> v4:
>>
>> - Split back commits
>> net/failsafe: add fast burst functions
>> net/failsafe: support device removal
>> That were squashed by error during a rebase
>> - Fix segfault on port plugin
>> - Fix isolate mode support for MLX4 ports plugin
>>
>> v4 --> v5:
>>
>> - Follow new plug / unplug API.
>>
>> v5 --> v6:
>>
>> - Follow new hotplug API.
>> - Improve usability of hotplug API.
>> - Fix rte_dev hotplug API implementation.
>> - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
>> - Use it to clean up resources on hotplug_remove.
>> - Fix hotplug implementation and support un pci bus.
>> The scan was not idempotent, nor clean.
>> Neither were the device fields.
>> - Implement plug operation for vdev bus.
>> This is needed for hotplug support and to make the EAL
>> independent from vdev-specific API.
>> - Remove useless parameters from plug / unplug API.
>>
>> This patchset is fairly big and complex. The hotplug API has been rushed and
>> has never been tested outside of the special case of vdev bus.
>>
>> These evolutions are proposed alongside this PMD as only this PMD allows to test
>> this API at the moment, and without those evolutions this PMD cannot be used.
>>
>> v6 --> v7
>>
>> - Split the series in three, with
>> vlan filter configuration store standing alone
>> Hotplug API fixes separated
>> Fail-safe PMD on its own.
>>
>> These changes should ease integration.
>>
>> v7 --> v8
>>
>> - Fix usage examples in documentation.
>> - Use rte_eth_dev_allocated when relevant.
>>
>> v8 --> v9
>>
>> - Use calloc instead of rte_realloc for command line parsing.
>> - Include errno only when necessary.
>>
>> v9 --> v10
>>
>> - Fix rte_flow description double-free issue.
>> Thanks Raslan for finding the issue :)
>> - Use RTE_ASSERT instead of assert.
>> Integrate the debug log of the fail-safe to
>> RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
>> - Remove devices post-state-sync during slave upkeep,
>> to avoid a useless early probe attempt.
>>
>> v10 --> v11
>>
>> - Added Glossary in documentation.
>> - Fixed issues oulined in [1].
>> - Removed Rx offload advertizement in feature matrix.
>>
>> [1]: http://dpdk.org/ml/archives/dev/2017-July/071406.html
>>
>> Gaetan Rivet (11):
>> ethdev: add deferred intermediate device state
>> ethdev: count devices consistently
>> net/failsafe: add fail-safe PMD
>> net/failsafe: add plug-in support
>> net/failsafe: add flexible device definition
>> net/failsafe: support flow API
>> net/failsafe: support Rx offload capabilities
>> net/failsafe: add fast burst functions
>> net/failsafe: support device removal
>> net/failsafe: support link status change event
>> net/failsafe: support flow API isolation mode
>
> Series applied to dpdk-next-net/master, thanks.
Hi Gaetan,
Can you please send a patch to update release notes to announce the new PMD?
And can you also send a web page to list the PMD within supported NICs [1]?
Thanks,
ferruh
[1]
http://dpdk.org/doc/nics
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v11 00/11] introduce fail-safe PMD
2017-08-03 13:00 ` Ferruh Yigit
@ 2017-08-03 13:49 ` Gaëtan Rivet
2017-08-03 15:48 ` Ferruh Yigit
0 siblings, 1 reply; 195+ messages in thread
From: Gaëtan Rivet @ 2017-08-03 13:49 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: dev
On Thu, Aug 03, 2017 at 02:00:15PM +0100, Ferruh Yigit wrote:
> On 7/18/2017 5:08 PM, Ferruh Yigit wrote:
> > On 7/18/2017 1:48 PM, Gaetan Rivet wrote:
> >> This PMD intercepts and manages Ethernet device removal events issued by
> >> slave PMDs and re-initializes them transparently when brought back so that
> >> existing applications do not need to be modified to benefit from true
> >> hot-plugging support.
> >>
> >> The stacked PMD approach shares many similarities with the bonding PMD but
> >> with a different purpose. While bonding provides the ability to group
> >> several links into a single logical device for enhanced throughput and
> >> supports fail-over at link level, this one manages the sudden disappearance
> >> of the underlying device; it guarantees applications face a valid device in
> >> working order at all times.
> >>
> >> Each fail-safe instance is configured to run atop one or several
> >> devices, with one defined as the preferred device. Hot-plug events are
> >> handled on all of them, and Tx is always directed to the preferred device
> >> if present or to the next available failover device (Rx is always performed
> >> on all devices for simplicity).
> >>
> >> Moreover, the configured slaves (preferred or failover) do not need to be
> >> present at initialization time and may appear later.
> >>
> >> Slaves configuration is continuously synchronized with that of the virtual
> >> device, which exposes their common set of capabilities to the application.
> >> Failure to apply the current configuration state to a slave for any reason
> >> simply reschedules its initialization.
> >>
> >> This patchset depends on:
> >>
> >> [dpdk-dev] [PATCH v4 0/8] fix hotplug API
> >> http://dpdk.org/ml/archives/dev/2017-July/071340.html
> >>
> >> v1 --> v2:
> >>
> >> - Wrote documentation
> >> - Fixed commit logs, signed-off-by
> >> - Added LSC event support
> >> - A few minor fixes
> >>
> >> v2 --> v3:
> >>
> >> - Numerous bug fixes.
> >> - Complete sub-EAL rework to follow new bus API.
> >> - burst protection on sub removal.
> >> - more flexible sub definition.
> >> - flow isolated mode support.
> >>
> >> v3 --> v4:
> >>
> >> - Split back commits
> >> net/failsafe: add fast burst functions
> >> net/failsafe: support device removal
> >> That were squashed by error during a rebase
> >> - Fix segfault on port plugin
> >> - Fix isolate mode support for MLX4 ports plugin
> >>
> >> v4 --> v5:
> >>
> >> - Follow new plug / unplug API.
> >>
> >> v5 --> v6:
> >>
> >> - Follow new hotplug API.
> >> - Improve usability of hotplug API.
> >> - Fix rte_dev hotplug API implementation.
> >> - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
> >> - Use it to clean up resources on hotplug_remove.
> >> - Fix hotplug implementation and support un pci bus.
> >> The scan was not idempotent, nor clean.
> >> Neither were the device fields.
> >> - Implement plug operation for vdev bus.
> >> This is needed for hotplug support and to make the EAL
> >> independent from vdev-specific API.
> >> - Remove useless parameters from plug / unplug API.
> >>
> >> This patchset is fairly big and complex. The hotplug API has been rushed and
> >> has never been tested outside of the special case of vdev bus.
> >>
> >> These evolutions are proposed alongside this PMD as only this PMD allows to test
> >> this API at the moment, and without those evolutions this PMD cannot be used.
> >>
> >> v6 --> v7
> >>
> >> - Split the series in three, with
> >> vlan filter configuration store standing alone
> >> Hotplug API fixes separated
> >> Fail-safe PMD on its own.
> >>
> >> These changes should ease integration.
> >>
> >> v7 --> v8
> >>
> >> - Fix usage examples in documentation.
> >> - Use rte_eth_dev_allocated when relevant.
> >>
> >> v8 --> v9
> >>
> >> - Use calloc instead of rte_realloc for command line parsing.
> >> - Include errno only when necessary.
> >>
> >> v9 --> v10
> >>
> >> - Fix rte_flow description double-free issue.
> >> Thanks Raslan for finding the issue :)
> >> - Use RTE_ASSERT instead of assert.
> >> Integrate the debug log of the fail-safe to
> >> RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
> >> - Remove devices post-state-sync during slave upkeep,
> >> to avoid a useless early probe attempt.
> >>
> >> v10 --> v11
> >>
> >> - Added Glossary in documentation.
> >> - Fixed issues oulined in [1].
> >> - Removed Rx offload advertizement in feature matrix.
> >>
> >> [1]: http://dpdk.org/ml/archives/dev/2017-July/071406.html
> >>
> >> Gaetan Rivet (11):
> >> ethdev: add deferred intermediate device state
> >> ethdev: count devices consistently
> >> net/failsafe: add fail-safe PMD
> >> net/failsafe: add plug-in support
> >> net/failsafe: add flexible device definition
> >> net/failsafe: support flow API
> >> net/failsafe: support Rx offload capabilities
> >> net/failsafe: add fast burst functions
> >> net/failsafe: support device removal
> >> net/failsafe: support link status change event
> >> net/failsafe: support flow API isolation mode
> >
> > Series applied to dpdk-next-net/master, thanks.
>
> Hi Gaetan,
>
> Can you please send a patch to update release notes to announce the new PMD?
>
Hi Ferruh,
Sure
> And can you also send a web page to list the PMD within supported NICs [1]?
>
How can I do that? Is there a git repository for dpdk.org I can propose
a patch for?
> Thanks,
> ferruh
>
> [1]
> http://dpdk.org/doc/nics
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 195+ messages in thread
* Re: [PATCH v11 00/11] introduce fail-safe PMD
2017-08-03 13:49 ` Gaëtan Rivet
@ 2017-08-03 15:48 ` Ferruh Yigit
0 siblings, 0 replies; 195+ messages in thread
From: Ferruh Yigit @ 2017-08-03 15:48 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: dev
On 8/3/2017 2:49 PM, Gaëtan Rivet wrote:
> On Thu, Aug 03, 2017 at 02:00:15PM +0100, Ferruh Yigit wrote:
>> On 7/18/2017 5:08 PM, Ferruh Yigit wrote:
>>> On 7/18/2017 1:48 PM, Gaetan Rivet wrote:
>>>> This PMD intercepts and manages Ethernet device removal events issued by
>>>> slave PMDs and re-initializes them transparently when brought back so that
>>>> existing applications do not need to be modified to benefit from true
>>>> hot-plugging support.
>>>>
>>>> The stacked PMD approach shares many similarities with the bonding PMD but
>>>> with a different purpose. While bonding provides the ability to group
>>>> several links into a single logical device for enhanced throughput and
>>>> supports fail-over at link level, this one manages the sudden disappearance
>>>> of the underlying device; it guarantees applications face a valid device in
>>>> working order at all times.
>>>>
>>>> Each fail-safe instance is configured to run atop one or several
>>>> devices, with one defined as the preferred device. Hot-plug events are
>>>> handled on all of them, and Tx is always directed to the preferred device
>>>> if present or to the next available failover device (Rx is always performed
>>>> on all devices for simplicity).
>>>>
>>>> Moreover, the configured slaves (preferred or failover) do not need to be
>>>> present at initialization time and may appear later.
>>>>
>>>> Slaves configuration is continuously synchronized with that of the virtual
>>>> device, which exposes their common set of capabilities to the application.
>>>> Failure to apply the current configuration state to a slave for any reason
>>>> simply reschedules its initialization.
>>>>
>>>> This patchset depends on:
>>>>
>>>> [dpdk-dev] [PATCH v4 0/8] fix hotplug API
>>>> http://dpdk.org/ml/archives/dev/2017-July/071340.html
>>>>
>>>> v1 --> v2:
>>>>
>>>> - Wrote documentation
>>>> - Fixed commit logs, signed-off-by
>>>> - Added LSC event support
>>>> - A few minor fixes
>>>>
>>>> v2 --> v3:
>>>>
>>>> - Numerous bug fixes.
>>>> - Complete sub-EAL rework to follow new bus API.
>>>> - burst protection on sub removal.
>>>> - more flexible sub definition.
>>>> - flow isolated mode support.
>>>>
>>>> v3 --> v4:
>>>>
>>>> - Split back commits
>>>> net/failsafe: add fast burst functions
>>>> net/failsafe: support device removal
>>>> That were squashed by error during a rebase
>>>> - Fix segfault on port plugin
>>>> - Fix isolate mode support for MLX4 ports plugin
>>>>
>>>> v4 --> v5:
>>>>
>>>> - Follow new plug / unplug API.
>>>>
>>>> v5 --> v6:
>>>>
>>>> - Follow new hotplug API.
>>>> - Improve usability of hotplug API.
>>>> - Fix rte_dev hotplug API implementation.
>>>> - Introduce rte_eal_devargs_rmv API as EXPERIMENTAL.
>>>> - Use it to clean up resources on hotplug_remove.
>>>> - Fix hotplug implementation and support un pci bus.
>>>> The scan was not idempotent, nor clean.
>>>> Neither were the device fields.
>>>> - Implement plug operation for vdev bus.
>>>> This is needed for hotplug support and to make the EAL
>>>> independent from vdev-specific API.
>>>> - Remove useless parameters from plug / unplug API.
>>>>
>>>> This patchset is fairly big and complex. The hotplug API has been rushed and
>>>> has never been tested outside of the special case of vdev bus.
>>>>
>>>> These evolutions are proposed alongside this PMD as only this PMD allows to test
>>>> this API at the moment, and without those evolutions this PMD cannot be used.
>>>>
>>>> v6 --> v7
>>>>
>>>> - Split the series in three, with
>>>> vlan filter configuration store standing alone
>>>> Hotplug API fixes separated
>>>> Fail-safe PMD on its own.
>>>>
>>>> These changes should ease integration.
>>>>
>>>> v7 --> v8
>>>>
>>>> - Fix usage examples in documentation.
>>>> - Use rte_eth_dev_allocated when relevant.
>>>>
>>>> v8 --> v9
>>>>
>>>> - Use calloc instead of rte_realloc for command line parsing.
>>>> - Include errno only when necessary.
>>>>
>>>> v9 --> v10
>>>>
>>>> - Fix rte_flow description double-free issue.
>>>> Thanks Raslan for finding the issue :)
>>>> - Use RTE_ASSERT instead of assert.
>>>> Integrate the debug log of the fail-safe to
>>>> RTE_LOG_DEBUG macro as well, allowing dynamic log levels.
>>>> - Remove devices post-state-sync during slave upkeep,
>>>> to avoid a useless early probe attempt.
>>>>
>>>> v10 --> v11
>>>>
>>>> - Added Glossary in documentation.
>>>> - Fixed issues oulined in [1].
>>>> - Removed Rx offload advertizement in feature matrix.
>>>>
>>>> [1]: http://dpdk.org/ml/archives/dev/2017-July/071406.html
>>>>
>>>> Gaetan Rivet (11):
>>>> ethdev: add deferred intermediate device state
>>>> ethdev: count devices consistently
>>>> net/failsafe: add fail-safe PMD
>>>> net/failsafe: add plug-in support
>>>> net/failsafe: add flexible device definition
>>>> net/failsafe: support flow API
>>>> net/failsafe: support Rx offload capabilities
>>>> net/failsafe: add fast burst functions
>>>> net/failsafe: support device removal
>>>> net/failsafe: support link status change event
>>>> net/failsafe: support flow API isolation mode
>>>
>>> Series applied to dpdk-next-net/master, thanks.
>>
>> Hi Gaetan,
>>
>> Can you please send a patch to update release notes to announce the new PMD?
>>
>
> Hi Ferruh,
>
> Sure
>
>> And can you also send a web page to list the PMD within supported NICs [1]?
>>
>
> How can I do that? Is there a git repository for dpdk.org I can propose
> a patch for?
Yes there is a dpdk-web repo: http://dpdk.org/browse/tools/dpdk-web/
>
>> Thanks,
>> ferruh
>>
>> [1]
>> http://dpdk.org/doc/nics
>
^ permalink raw reply [flat|nested] 195+ messages in thread