[Qemu-devel] [PULL 0/5] target-arm queue

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

Handful of bugfix patches for arm for rc0; also
one milkymist patch, thrown in since I was putting
the pullreq together anyway.

thanks
-- PMM

The following changes since commit 03c1ca1c51783603d42eb0f91d35961f0f4b4947:

  Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181105' into staging (2018-11-06 09:10:46 +0000)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20181106

for you to fetch changes up to 23463e0e4aeb2f0a9c60549a2c163f4adc0b8512:

  target/arm: Fix ATS1Hx instructions (2018-11-06 11:32:14 +0000)

----------------------------------------------------------------
target-arm queue:
 * Remove can't-happen if() from handle_vec_simd_shli()
 * hw/arm/exynos4210: Zero memory allocated for Exynos4210State
 * Set S and PTW in 64-bit PAR format
 * Fix ATS1Hx instructions
 * milkymist: Check for failure trying to load BIOS image

----------------------------------------------------------------
Peter Maydell (5):
      target/arm: Remove can't-happen if() from handle_vec_simd_shli()
      milkymist: Check for failure trying to load BIOS image
      hw/arm/exynos4210: Zero memory allocated for Exynos4210State
      target/arm: Set S and PTW in 64-bit PAR format
      target/arm: Fix ATS1Hx instructions

 hw/arm/exynos4210.c        |  2 +-
 hw/lm32/milkymist.c        |  5 ++++-
 target/arm/helper.c        | 14 ++++++++------
 target/arm/translate-a64.c |  8 +++-----
 4 files changed, 16 insertions(+), 13 deletions(-)

[Qemu-devel] [PULL 1/5] target/arm: Remove can't-happen if() from handle_vec_simd_shli()

[Peter Maydell]

In handle_vec_simd_shli() we have a check:
     if (size > 3 && !is_q) {
         unallocated_encoding(s);
         return;
     }
However this can never be true, because we calculate
    int size = 32 - clz32(immh) - 1;
where immh is a 4 bit field which we know cannot be all-zeroes.
So the clz32() return must be in {28,29,30,31} and the resulting
size is in {0,1,2,3}, and "size > 3" is never true.

This unnecessary code confuses Coverity's analysis:
in CID 1396476 it thinks we might later index off the
end of an array because the condition implies that we
might have a size > 3.

Remove the code, and instead assert that the size is in [0..3],
since the decode that enforces that is somewhat distant from
this function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181030162517.21816-1-peter.maydell@linaro.org
---
 target/arm/translate-a64.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 88195ab9490..fd36425f1ae 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -9483,12 +9483,10 @@ static void handle_vec_simd_shli(DisasContext *s, bool is_q, bool insert,
     int immhb = immh << 3 | immb;
     int shift = immhb - (8 << size);
 
-    if (extract32(immh, 3, 1) && !is_q) {
-        unallocated_encoding(s);
-        return;
-    }
+    /* Range of size is limited by decode: immh is a non-zero 4 bit field */
+    assert(size >= 0 && size <= 3);
 
-    if (size > 3 && !is_q) {
+    if (extract32(immh, 3, 1) && !is_q) {
         unallocated_encoding(s);
         return;
     }
-- 
2.19.1

[Qemu-devel] [PULL 2/5] milkymist: Check for failure trying to load BIOS image

[Peter Maydell]

Check the return value from load_image_targphys(), which tells us
whether our attempt to load the BIOS image into RAM failed.
(Spotted by Coverity, CID 1190305.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20181030170032.1844-1-peter.maydell@linaro.org
---
 hw/lm32/milkymist.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/hw/lm32/milkymist.c b/hw/lm32/milkymist.c
index 321f184595e..63c6894c955 100644
--- a/hw/lm32/milkymist.c
+++ b/hw/lm32/milkymist.c
@@ -138,7 +138,10 @@ milkymist_init(MachineState *machine)
     bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
 
     if (bios_filename) {
-        load_image_targphys(bios_filename, BIOS_OFFSET, BIOS_SIZE);
+        if (load_image_targphys(bios_filename, BIOS_OFFSET, BIOS_SIZE) < 0) {
+            error_report("could not load bios '%s'", bios_filename);
+            exit(1);
+        }
     }
 
     reset_info->bootstrap_pc = BIOS_OFFSET;
-- 
2.19.1

[Qemu-devel] [PULL 3/5] hw/arm/exynos4210: Zero memory allocated for Exynos4210State

[Peter Maydell]

In exynos4210_init() we allocate memory for an Exynos4210State
struct. Generally devices can assume that the memory allocated
for their state struct is zero-initialized; we broke that
assumption here by using g_new(). Use g_new0() instead.
(In particular, some code assumes that the various irq arrays
in the Exynos4210Irq sub-struct are zero-initialized.)

In the longer term, this code should be QOMified, and then
the struct memory will be allocated elsewhere and by functions
which always zero-initalize it; but for 3.1 this is a
simple fix.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181105151132.13884-1-peter.maydell@linaro.org
---
 hw/arm/exynos4210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c
index 827318a0036..af82e955421 100644
--- a/hw/arm/exynos4210.c
+++ b/hw/arm/exynos4210.c
@@ -162,7 +162,7 @@ static uint64_t exynos4210_calc_affinity(int cpu)
 
 Exynos4210State *exynos4210_init(MemoryRegion *system_mem)
 {
-    Exynos4210State *s = g_new(Exynos4210State, 1);
+    Exynos4210State *s = g_new0(Exynos4210State, 1);
     qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
     SysBusDevice *busdev;
     DeviceState *dev;
-- 
2.19.1

[Qemu-devel] [PULL 4/5] target/arm: Set S and PTW in 64-bit PAR format

[Peter Maydell]

In do_ats_write() we construct a PAR value based on the result
of the translation.  A comment says "S2WLK and FSTAGE are always
zero, because we don't implement virtualization".
Since we do in fact now implement virtualization, add the missing
code that sets these bits based on the reported ARMMMUFaultInfo.

(These bits are named PTW and S in ARMv8, so we follow that
convention in the new comments in this patch.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-2-peter.maydell@linaro.org
---
 target/arm/helper.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 0ea95b08151..69f684abd89 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2347,10 +2347,12 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
 
             par64 |= 1; /* F */
             par64 |= (fsr & 0x3f) << 1; /* FS */
-            /* Note that S2WLK and FSTAGE are always zero, because we don't
-             * implement virtualization and therefore there can't be a stage 2
-             * fault.
-             */
+            if (fi.stage2) {
+                par64 |= (1 << 9); /* S */
+            }
+            if (fi.s1ptw) {
+                par64 |= (1 << 8); /* PTW */
+            }
         }
     } else {
         /* fsr is a DFSR/IFSR value for the short descriptor
-- 
2.19.1

[Qemu-devel] [PULL 5/5] target/arm: Fix ATS1Hx instructions

[Peter Maydell]

ATS1HR and ATS1HW (which allow AArch32 EL2 to do address translations
on the EL2 translation regime) were implemented in commit 14db7fe09a2c8.
However, we got them wrong: these should do stage 1 address translations
as defined for NS-EL2, which is ARMMMUIdx_S1E2. We were incorrectly
making them perform stage 2 translations.

A few years later in commit 1313e2d7e2cd we forgot entirely that
we'd implemented ATS1Hx, and added a comment that ATS1Hx were
"not supported yet". Remove the comment; there is no extra code
needed to handle these operations in do_ats_write(), because
arm_s1_regime_using_lpae_format() returns true for ARMMMUIdx_S1E2,
which forces 64-bit PAR format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20181016093703.10637-3-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
 target/arm/helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 69f684abd89..96301930cc8 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2319,7 +2319,7 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
          *
          * (Note that HCR.DC makes HCR.VM behave as if it is 1.)
          *
-         * ATS1Hx always uses the 64bit format (not supported yet).
+         * ATS1Hx always uses the 64bit format.
          */
         format64 = arm_s1_regime_using_lpae_format(env, mmu_idx);
 
@@ -2444,7 +2444,7 @@ static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri,
     MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
     uint64_t par64;
 
-    par64 = do_ats_write(env, value, access_type, ARMMMUIdx_S2NS);
+    par64 = do_ats_write(env, value, access_type, ARMMMUIdx_S1E2);
 
     A32_BANKED_CURRENT_REG_SET(env, par, par64);
 }
-- 
2.19.1

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On 6 November 2018 at 11:38, Peter Maydell <peter.maydell@linaro.org> wrote:
> Handful of bugfix patches for arm for rc0; also
> one milkymist patch, thrown in since I was putting
> the pullreq together anyway.
>
> thanks
> -- PMM
>
> The following changes since commit 03c1ca1c51783603d42eb0f91d35961f0f4b4947:
>
>   Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181105' into staging (2018-11-06 09:10:46 +0000)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20181106
>
> for you to fetch changes up to 23463e0e4aeb2f0a9c60549a2c163f4adc0b8512:
>
>   target/arm: Fix ATS1Hx instructions (2018-11-06 11:32:14 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * Remove can't-happen if() from handle_vec_simd_shli()
>  * hw/arm/exynos4210: Zero memory allocated for Exynos4210State
>  * Set S and PTW in 64-bit PAR format
>  * Fix ATS1Hx instructions
>  * milkymist: Check for failure trying to load BIOS image
>

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On Fri, 26 Jul 2019 at 16:19, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Handful of bug fixes to sneak in before rc3.
>
> thanks
> -- PMM
>
> The following changes since commit c985266ea5b50e46e07b3568c1346e10064205c9:
>
>   Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190726' into staging (2019-07-26 13:52:06 +0100)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190726
>
> for you to fetch changes up to 67505c114e6acc26f3a1a2b74833c61b6a34ff95:
>
>   hw/arm/boot: Further improve initrd positioning code (2019-07-26 16:17:56 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * Fix broken migration on pl330 device
>  * Fix broken migration on stellaris-input device
>  * Add type checks to vmstate varry macros to avoid this class of bugs
>  * hw/arm/boot: Fix some remaining cases where we would put the
>    initrd on top of the kernel image
>


Applied, thanks.

Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.

-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

Handful of bug fixes to sneak in before rc3.

thanks
-- PMM

The following changes since commit c985266ea5b50e46e07b3568c1346e10064205c9:

  Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190726' into staging (2019-07-26 13:52:06 +0100)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190726

for you to fetch changes up to 67505c114e6acc26f3a1a2b74833c61b6a34ff95:

  hw/arm/boot: Further improve initrd positioning code (2019-07-26 16:17:56 +0100)

----------------------------------------------------------------
target-arm queue:
 * Fix broken migration on pl330 device
 * Fix broken migration on stellaris-input device
 * Add type checks to vmstate varry macros to avoid this class of bugs
 * hw/arm/boot: Fix some remaining cases where we would put the
   initrd on top of the kernel image

----------------------------------------------------------------
Damien Hedde (1):
      pl330: fix vmstate description

Peter Maydell (4):
      stellaris_input: Fix vmstate description of buttons field
      vmstate.h: Type check VMSTATE_STRUCT_VARRAY macros
      hw/arm/boot: Rename elf_{low, high}_addr to image_{low, high}_addr
      hw/arm/boot: Further improve initrd positioning code

 include/migration/vmstate.h | 30 ++++++++++++++++++++++++------
 hw/arm/boot.c               | 37 +++++++++++++++++++++++++++----------
 hw/dma/pl330.c              | 17 +++++++++--------
 hw/input/stellaris_input.c  | 10 ++++++----
 4 files changed, 66 insertions(+), 28 deletions(-)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On Mon, 22 Jul 2019 at 14:14, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> target-arm queue for rc2. This has 3 Arm related bug fixes,
> and a couple of non-arm patches which don't have an obviously
> better route into the tree.
>
> thanks
> -- PMM
>
> The following changes since commit b9e02bb3f98174209dbd5c96858e65a31723221b:
>
>   Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-07-19' into staging (2019-07-22 10:11:28 +0100)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190722
>
> for you to fetch changes up to ddb45afbfbc639365d6c934e4e29f6de5e5e2a0e:
>
>   contrib/elf2dmp: Build download.o with CURL_CFLAGS (2019-07-22 14:07:39 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * target/arm: Add missing break statement for Hypervisor Trap Exception
>    (fixes handling of SMC insn taken to AArch32 Hyp mode via HCR.TSC)
>  * hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
>  * target/arm: Limit ID register assertions to TCG
>  * configure: Clarify URL to source downloads
>  * contrib/elf2dmp: Build download.o with CURL_CFLAGS
>


Applied, thanks.

Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.

-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

target-arm queue for rc2. This has 3 Arm related bug fixes,
and a couple of non-arm patches which don't have an obviously
better route into the tree.

thanks
-- PMM

The following changes since commit b9e02bb3f98174209dbd5c96858e65a31723221b:

  Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-07-19' into staging (2019-07-22 10:11:28 +0100)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190722

for you to fetch changes up to ddb45afbfbc639365d6c934e4e29f6de5e5e2a0e:

  contrib/elf2dmp: Build download.o with CURL_CFLAGS (2019-07-22 14:07:39 +0100)

----------------------------------------------------------------
target-arm queue:
 * target/arm: Add missing break statement for Hypervisor Trap Exception
   (fixes handling of SMC insn taken to AArch32 Hyp mode via HCR.TSC)
 * hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
 * target/arm: Limit ID register assertions to TCG
 * configure: Clarify URL to source downloads
 * contrib/elf2dmp: Build download.o with CURL_CFLAGS

----------------------------------------------------------------
Peter Maydell (4):
      hw/arm/fsl-imx6ul.c: Remove dead SMP-related code
      target/arm: Limit ID register assertions to TCG
      configure: Clarify URL to source downloads
      contrib/elf2dmp: Build download.o with CURL_CFLAGS

Philippe Mathieu-Daudé (1):
      target/arm: Add missing break statement for Hypervisor Trap Exception

 configure                     |  2 +-
 Makefile                      |  1 -
 contrib/elf2dmp/Makefile.objs |  3 +++
 include/hw/arm/fsl-imx6ul.h   |  2 +-
 hw/arm/fsl-imx6ul.c           | 62 +++++++++++++------------------------------
 hw/arm/mcimx6ul-evk.c         |  2 +-
 target/arm/cpu.c              |  7 +++--
 target/arm/helper.c           |  1 +
 8 files changed, 30 insertions(+), 50 deletions(-)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On 23 July 2018 at 15:41, Peter Maydell <peter.maydell@linaro.org> wrote:
> target-arm queue for 3.0:
>
> Thomas' fixes for instrospection issues with a handful of
> devices (including one microblaze one that I include in this
> pullreq for convenience's sake), plus my bugfix for a
> corner case of small MPU region support.
>
> thanks
> -- PMM
>
> The following changes since commit 55b1f14cefcb19ce6d5e28c4c83404230888aa7e:
>
>   Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging (2018-07-23 14:03:14 +0100)
>
> are available in the Git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180723
>
> for you to fetch changes up to 1ddc9b98c3cb89fe23a55ba924000fd645253e87:
>
>   hw/intc/exynos4210_gic: Turn instance_init into realize function (2018-07-23 15:21:27 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * spitz, exynos: fix bugs when introspecting some devices
>  * hw/microblaze/xlnx-zynqmp-pmu: Fix introspection problem in 'xlnx, zynqmp-pmu-soc'
>  * target/arm: Correctly handle overlapping small MPU regions
>  * hw/sd/bcm2835_sdhost: Fix PIO mode writes
>

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

target-arm queue for 3.0:

Thomas' fixes for instrospection issues with a handful of
devices (including one microblaze one that I include in this
pullreq for convenience's sake), plus my bugfix for a
corner case of small MPU region support.

thanks
-- PMM

The following changes since commit 55b1f14cefcb19ce6d5e28c4c83404230888aa7e:

  Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging (2018-07-23 14:03:14 +0100)

are available in the Git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180723

for you to fetch changes up to 1ddc9b98c3cb89fe23a55ba924000fd645253e87:

  hw/intc/exynos4210_gic: Turn instance_init into realize function (2018-07-23 15:21:27 +0100)

----------------------------------------------------------------
target-arm queue:
 * spitz, exynos: fix bugs when introspecting some devices
 * hw/microblaze/xlnx-zynqmp-pmu: Fix introspection problem in 'xlnx, zynqmp-pmu-soc'
 * target/arm: Correctly handle overlapping small MPU regions
 * hw/sd/bcm2835_sdhost: Fix PIO mode writes

----------------------------------------------------------------
Guenter Roeck (1):
      hw/sd/bcm2835_sdhost: Fix PIO mode writes

Peter Maydell (1):
      target/arm: Correctly handle overlapping small MPU regions

Thomas Huth (3):
      hw/microblaze/xlnx-zynqmp-pmu: Fix introspection problem in 'xlnx, zynqmp-pmu-soc'
      hw/arm/spitz: Move problematic nand_init() code to realize function
      hw/intc/exynos4210_gic: Turn instance_init into realize function

 hw/arm/spitz.c                  | 15 ++++++++++----
 hw/intc/exynos4210_gic.c        |  6 +++---
 hw/microblaze/xlnx-zynqmp-pmu.c | 10 ++++-----
 hw/sd/bcm2835_sdhost.c          | 20 ++++++++++++++----
 target/arm/helper.c             | 46 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 80 insertions(+), 17 deletions(-)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On 31 October 2017 at 13:11, Peter Maydell <peter.maydell@linaro.org> wrote:
> Just small stuff. I expect/hope to get the "report attributes
> in PAR register" fix from Andrew in, but will either send another
> pull or just apply it as a single patch once it's been reviewed.
> (I think we can call it a bugfix anyway, since it fixes booting
> of Windows on ARM.)
>
> thanks
> -- PMM
>
>
> The following changes since commit abf6e752e55b2f5afb48303429dea2db7c3a62de:
>
>   Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20171030' into staging (2017-10-30 13:02:45 +0000)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20171031
>
> for you to fetch changes up to 168df2dea701bbf3118bdfea7794369dfa694d3d:
>
>   hw/pci-host/gpex: Improve INTX to gsi routing error checking (2017-10-31 11:50:52 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * fix instruction-length bit in syndrome for WFI/WFE traps
>  * xlnx-zcu102: Specify the max number of CPUs
>  * msf2: Remove dead code reported by Coverity
>  * msf2: Wire up SYSRESETREQ in SoC for system reset
>  * hw/pci-host/gpex: Improve INTX to gsi routing error checking
>


Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

Just small stuff. I expect/hope to get the "report attributes
in PAR register" fix from Andrew in, but will either send another
pull or just apply it as a single patch once it's been reviewed.
(I think we can call it a bugfix anyway, since it fixes booting
of Windows on ARM.)

thanks
-- PMM


The following changes since commit abf6e752e55b2f5afb48303429dea2db7c3a62de:

  Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20171030' into staging (2017-10-30 13:02:45 +0000)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20171031

for you to fetch changes up to 168df2dea701bbf3118bdfea7794369dfa694d3d:

  hw/pci-host/gpex: Improve INTX to gsi routing error checking (2017-10-31 11:50:52 +0000)

----------------------------------------------------------------
target-arm queue:
 * fix instruction-length bit in syndrome for WFI/WFE traps
 * xlnx-zcu102: Specify the max number of CPUs
 * msf2: Remove dead code reported by Coverity
 * msf2: Wire up SYSRESETREQ in SoC for system reset
 * hw/pci-host/gpex: Improve INTX to gsi routing error checking

----------------------------------------------------------------
Alistair Francis (1):
      xlnx-zcu102: Specify the max number of CPUs

Eric Auger (1):
      hw/pci-host/gpex: Improve INTX to gsi routing error checking

Stefano Stabellini (1):
      fix WFI/WFE length in syndrome register

Subbaraya Sundeep (2):
      msf2: Remove dead code reported by Coverity
      msf2: Wire up SYSRESETREQ in SoC for system reset

 target/arm/helper.h        |  2 +-
 target/arm/internals.h     |  3 ++-
 hw/arm/msf2-soc.c          | 11 +++++++++++
 hw/arm/xlnx-zcu102.c       |  1 +
 hw/pci-host/gpex.c         | 10 ++++++++--
 hw/ssi/mss-spi.c           | 18 ++++++++++++++----
 target/arm/op_helper.c     |  7 ++++---
 target/arm/psci.c          |  2 +-
 target/arm/translate-a64.c |  7 ++++++-
 target/arm/translate.c     | 10 +++++++++-
 10 files changed, 57 insertions(+), 14 deletions(-)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On 4 April 2016 at 17:43, Peter Maydell <peter.maydell@linaro.org> wrote:
> ARM changes for rc1: a small set of bugfixes which didn't quite
> make rc0, mostly.
>
> thanks
> -- PMM
>
>
> The following changes since commit c40e13e106243a6798b7b02b4d7de5ff6c9be128:
>
>   bsd-user: add necessary includes to fix warnings (2016-04-04 16:17:18 +0100)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160404
>
> for you to fetch changes up to bf06c1123a427fefc2cf9cf8019578eafc19eb6f:
>
>   target-arm: Make the 64-bit version of VTCR do the migration (2016-04-04 17:33:52 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * bcm2836: wire up CPU timer interrupts correctly
>  * linux-user: ignore EXCP_YIELD in ARM cpu_loop()
>  * target-arm: correctly reset SCTLR_EL3
>  * target-arm: remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
>  * target-arm: make the 64-bit version of VTCR do the migration
>

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

ARM changes for rc1: a small set of bugfixes which didn't quite
make rc0, mostly.

thanks
-- PMM


The following changes since commit c40e13e106243a6798b7b02b4d7de5ff6c9be128:

  bsd-user: add necessary includes to fix warnings (2016-04-04 16:17:18 +0100)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160404

for you to fetch changes up to bf06c1123a427fefc2cf9cf8019578eafc19eb6f:

  target-arm: Make the 64-bit version of VTCR do the migration (2016-04-04 17:33:52 +0100)

----------------------------------------------------------------
target-arm queue:
 * bcm2836: wire up CPU timer interrupts correctly
 * linux-user: ignore EXCP_YIELD in ARM cpu_loop()
 * target-arm: correctly reset SCTLR_EL3
 * target-arm: remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
 * target-arm: make the 64-bit version of VTCR do the migration

----------------------------------------------------------------
Peter Maydell (5):
      hw/arm/bcm2836: Wire up CPU timer interrupts correctly
      linux-user: arm: Handle (ignore) EXCP_YIELD in ARM cpu_loop()
      target-arm: Correctly reset SCTLR_EL3 for 64-bit CPUs
      target-arm: Remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3
      target-arm: Make the 64-bit version of VTCR do the migration

 hw/arm/bcm2836.c    |  6 +++++-
 linux-user/main.c   |  6 ++++++
 target-arm/helper.c | 31 ++++++++++++++++++-------------
 3 files changed, 29 insertions(+), 14 deletions(-)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

On 11 January 2016 at 14:34, Peter Maydell <peter.maydell@linaro.org> wrote:
> Not very many patches here, but no point holding on to them.
> I'm not going to email out the libvixl upgrade patch because
> it's so big it'd get blocked by the list server anyway.
>
> thanks
> -- PMM
>
>
> The following changes since commit 692a5519ab1510ff48bdde9701017b9425643058:
>
>   Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging (2016-01-11 12:56:58 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160111
>
> for you to fetch changes up to fe84fe5e2a59d5e83f043226114153bd3ccb1c51:
>
>   hw/arm/virt: Support legacy -nic command line syntax (2016-01-11 14:23:03 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * i.MX: move i.MX31 CCM object to register array
>  * xilinx_axidma: remove dead code
>  * xlnx-zynqmp: Add support for high DDR memory regions
>  * disas/libvixl: Update to upstream VIXL 1.12
>  * virt: Support legacy -nic command line syntax
>

There was a compile issue with the "xlnx-zynqmp: Add support for high DDR
memory regions" patch; I have dropped it and will redo the pull.

thanks
-- PMM

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

Not very many patches here, but no point holding on to them.
I'm not going to email out the libvixl upgrade patch because
it's so big it'd get blocked by the list server anyway.

thanks
-- PMM


The following changes since commit 692a5519ab1510ff48bdde9701017b9425643058:

  Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging (2016-01-11 12:56:58 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20160111

for you to fetch changes up to fe84fe5e2a59d5e83f043226114153bd3ccb1c51:

  hw/arm/virt: Support legacy -nic command line syntax (2016-01-11 14:23:03 +0000)

----------------------------------------------------------------
target-arm queue:
 * i.MX: move i.MX31 CCM object to register array
 * xilinx_axidma: remove dead code
 * xlnx-zynqmp: Add support for high DDR memory regions
 * disas/libvixl: Update to upstream VIXL 1.12
 * virt: Support legacy -nic command line syntax

----------------------------------------------------------------
Alistair Francis (1):
      xlnx-zynqmp: Add support for high DDR memory regions

Andrew Jones (1):
      hw/dma/xilinx_axidma: remove dead code

Ashok Kumar (1):
      hw/arm/virt: Support legacy -nic command line syntax

Jean-Christophe DUBOIS (1):
      i.MX: move i.MX31 CCM object to register array

Peter Maydell (1):
      disas/libvixl: Update to upstream VIXL 1.12

 disas/arm-a64.cc                                   |    2 +-
 disas/libvixl/Makefile.objs                        |    9 +-
 disas/libvixl/README                               |    3 +-
 disas/libvixl/a64/assembler-a64.h                  | 2353 ----------
 disas/libvixl/a64/disasm-a64.cc                    | 1954 ---------
 disas/libvixl/a64/instructions-a64.cc              |  314 --
 disas/libvixl/a64/instructions-a64.h               |  384 --
 disas/libvixl/vixl/a64/assembler-a64.h             | 4624 ++++++++++++++++++++
 disas/libvixl/{ => vixl}/a64/constants-a64.h       |  967 +++-
 disas/libvixl/{ => vixl}/a64/cpu-a64.h             |    6 +-
 disas/libvixl/{ => vixl}/a64/decoder-a64.cc        |  210 +-
 disas/libvixl/{ => vixl}/a64/decoder-a64.h         |   58 +-
 disas/libvixl/vixl/a64/disasm-a64.cc               | 3487 +++++++++++++++
 disas/libvixl/{ => vixl}/a64/disasm-a64.h          |   17 +-
 disas/libvixl/vixl/a64/instructions-a64.cc         |  622 +++
 disas/libvixl/vixl/a64/instructions-a64.h          |  757 ++++
 disas/libvixl/{ => vixl}/code-buffer.h             |    2 +-
 .../{utils.cc => vixl/compiler-intrinsics.cc}      |  137 +-
 disas/libvixl/vixl/compiler-intrinsics.h           |  155 +
 disas/libvixl/{ => vixl}/globals.h                 |   82 +-
 disas/libvixl/vixl/invalset.h                      |  775 ++++
 disas/libvixl/{ => vixl}/platform.h                |    2 +-
 disas/libvixl/vixl/utils.cc                        |  142 +
 disas/libvixl/{ => vixl}/utils.h                   |  115 +-
 hw/arm/virt.c                                      |   14 +
 hw/arm/xlnx-ep108.c                                |   35 +-
 hw/arm/xlnx-zynqmp.c                               |   37 +
 hw/dma/xilinx_axidma.c                             |   10 -
 hw/misc/imx31_ccm.c                                |  188 +-
 include/hw/arm/xlnx-zynqmp.h                       |   12 +
 include/hw/misc/imx31_ccm.h                        |   38 +-
 31 files changed, 12185 insertions(+), 5326 deletions(-)
 delete mode 100644 disas/libvixl/a64/assembler-a64.h
 delete mode 100644 disas/libvixl/a64/disasm-a64.cc
 delete mode 100644 disas/libvixl/a64/instructions-a64.cc
 delete mode 100644 disas/libvixl/a64/instructions-a64.h
 create mode 100644 disas/libvixl/vixl/a64/assembler-a64.h
 rename disas/libvixl/{ => vixl}/a64/constants-a64.h (51%)
 rename disas/libvixl/{ => vixl}/a64/cpu-a64.h (96%)
 rename disas/libvixl/{ => vixl}/a64/decoder-a64.cc (81%)
 rename disas/libvixl/{ => vixl}/a64/decoder-a64.h (82%)
 create mode 100644 disas/libvixl/vixl/a64/disasm-a64.cc
 rename disas/libvixl/{ => vixl}/a64/disasm-a64.h (94%)
 create mode 100644 disas/libvixl/vixl/a64/instructions-a64.cc
 create mode 100644 disas/libvixl/vixl/a64/instructions-a64.h
 rename disas/libvixl/{ => vixl}/code-buffer.h (99%)
 rename disas/libvixl/{utils.cc => vixl/compiler-intrinsics.cc} (60%)
 create mode 100644 disas/libvixl/vixl/compiler-intrinsics.h
 rename disas/libvixl/{ => vixl}/globals.h (52%)
 create mode 100644 disas/libvixl/vixl/invalset.h
 rename disas/libvixl/{ => vixl}/platform.h (98%)
 create mode 100644 disas/libvixl/vixl/utils.cc
 rename disas/libvixl/{ => vixl}/utils.h (68%)

Re: [Qemu-devel] [PULL 0/5] target-arm queue

[Blue Swirl]

On Wed, Jan 25, 2012 at 15:27, Peter Maydell <peter.maydell@linaro.org> wrote:
> Here's the latest target-arm pullreq. It includes Mark's fix for
> config_base_register, which is in turn a dependency of the arm-devs
> pullreq I'm about to send out, and which I'd like to get in before
> Anthony's QOM patchset lands and invalidates it :-)
>
> Please pull.

Thanks, pulled.

> -- PMM
>
>
> The following changes since commit 5b4448d27d7c6ff6e18a1edc8245cb1db783e37c:
>
>  Merge remote-tracking branch 'qemu-kvm/uq/master' into staging (2012-01-23 11:00:26 -0600)
>
> are available in the git repository at:
>
>  git://git.linaro.org/people/pmaydell/qemu-arm.git target-arm.for-upstream
>
> Mark Langsdorf (1):
>      arm: store the config_base_register during cpu_reset
>
> Peter Maydell (4):
>      target-arm: Fix implementation of TLB invalidate operations
>      target-arm/helper.c: Don't assume softfloat int32 is 32 bits only
>      Add dummy implementation of generic timer cp15 registers
>      Add Cortex-A15 CPU definition
>
>  target-arm/cpu.h    |    2 +
>  target-arm/helper.c |   86 ++++++++++++++++++++++++++++++++++++++++++---------
>  2 files changed, 73 insertions(+), 15 deletions(-)

[Qemu-devel] [PULL 0/5] target-arm queue

[Peter Maydell]

Here's the latest target-arm pullreq. It includes Mark's fix for
config_base_register, which is in turn a dependency of the arm-devs
pullreq I'm about to send out, and which I'd like to get in before
Anthony's QOM patchset lands and invalidates it :-)

Please pull.

-- PMM


The following changes since commit 5b4448d27d7c6ff6e18a1edc8245cb1db783e37c:

  Merge remote-tracking branch 'qemu-kvm/uq/master' into staging (2012-01-23 11:00:26 -0600)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git target-arm.for-upstream

Mark Langsdorf (1):
      arm: store the config_base_register during cpu_reset

Peter Maydell (4):
      target-arm: Fix implementation of TLB invalidate operations
      target-arm/helper.c: Don't assume softfloat int32 is 32 bits only
      Add dummy implementation of generic timer cp15 registers
      Add Cortex-A15 CPU definition

 target-arm/cpu.h    |    2 +
 target-arm/helper.c |   86 ++++++++++++++++++++++++++++++++++++++++++---------
 2 files changed, 73 insertions(+), 15 deletions(-)