From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 21/93] arm: Remove igep00x0 board
Date: Mon, 19 Nov 2018 08:53:01 -0700 [thread overview]
Message-ID: <20181119155413.158098-22-sjg@chromium.org> (raw)
In-Reply-To: <20181119155413.158098-1-sjg@chromium.org>
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
arch/arm/mach-omap2/omap3/Kconfig | 1 -
board/isee/igep00x0/Kconfig | 12 --
board/isee/igep00x0/MAINTAINERS | 7 -
board/isee/igep00x0/Makefile | 10 --
board/isee/igep00x0/common.c | 67 --------
board/isee/igep00x0/igep00x0.c | 258 ------------------------------
board/isee/igep00x0/igep00x0.h | 127 ---------------
board/isee/igep00x0/spl.c | 63 --------
configs/igep0032_defconfig | 52 ------
configs/igep00x0_defconfig | 53 ------
include/configs/omap3_igep00x0.h | 135 ----------------
11 files changed, 785 deletions(-)
delete mode 100644 board/isee/igep00x0/Kconfig
delete mode 100644 board/isee/igep00x0/MAINTAINERS
delete mode 100644 board/isee/igep00x0/Makefile
delete mode 100644 board/isee/igep00x0/common.c
delete mode 100644 board/isee/igep00x0/igep00x0.c
delete mode 100644 board/isee/igep00x0/igep00x0.h
delete mode 100644 board/isee/igep00x0/spl.c
delete mode 100644 configs/igep0032_defconfig
delete mode 100644 configs/igep00x0_defconfig
delete mode 100644 include/configs/omap3_igep00x0.h
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 04b6ffe574a..9bd07dd8c55 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -200,7 +200,6 @@ source "board/compulab/cm_t35/Kconfig"
source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
-source "board/isee/igep00x0/Kconfig"
source "board/overo/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
diff --git a/board/isee/igep00x0/Kconfig b/board/isee/igep00x0/Kconfig
deleted file mode 100644
index aa46882b051..00000000000
--- a/board/isee/igep00x0/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_IGEP00X0
-
-config SYS_BOARD
- default "igep00x0"
-
-config SYS_VENDOR
- default "isee"
-
-config SYS_CONFIG_NAME
- default "omap3_igep00x0"
-
-endif
diff --git a/board/isee/igep00x0/MAINTAINERS b/board/isee/igep00x0/MAINTAINERS
deleted file mode 100644
index d75d400eed0..00000000000
--- a/board/isee/igep00x0/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-IGEP00X0 BOARD
-M: Enric Balletbo i Serra <eballetbo@gmail.com>
-S: Maintained
-F: board/isee/igep00x0/
-F: include/configs/omap3_igep00x0.h
-F: configs/igep00x0_defconfig
-F: configs/igep0032_defconfig
diff --git a/board/isee/igep00x0/Makefile b/board/isee/igep00x0/Makefile
deleted file mode 100644
index e095bcada29..00000000000
--- a/board/isee/igep00x0/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-ifdef CONFIG_SPL_BUILD
-obj-y := spl.o common.o
-else
-obj-y := igep00x0.o common.o
-endif
diff --git a/board/isee/igep00x0/common.c b/board/isee/igep00x0/common.c
deleted file mode 100644
index f5d62ffc2e5..00000000000
--- a/board/isee/igep00x0/common.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <common.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/omap_mmc.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <jffs2/load_kernel.h>
-#include <linux/mtd/rawnand.h>
-#include "igep00x0.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_DEFAULT();
-}
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- int loops = 100;
-
- /* find out flash memory type, assume NAND first */
- gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
- gpmc_init();
-
- /* Issue a RESET and then READID */
- writeb(NAND_CMD_RESET, &gpmc_cfg->cs[0].nand_cmd);
- writeb(NAND_CMD_STATUS, &gpmc_cfg->cs[0].nand_cmd);
- while ((readl(&gpmc_cfg->cs[0].nand_dat) & NAND_STATUS_READY)
- != NAND_STATUS_READY) {
- udelay(1);
- if (--loops == 0) {
- gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
- gpmc_init(); /* reinitialize for OneNAND */
- break;
- }
- }
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- return 0;
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(0);
-}
-#endif
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
deleted file mode 100644
index 367af82d4a1..00000000000
--- a/board/isee/igep00x0/igep00x0.c
+++ /dev/null
@@ -1,258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- */
-#include <common.h>
-#include <status_led.h>
-#include <dm.h>
-#include <ns16550.h>
-#include <twl4030.h>
-#include <netdev.h>
-#include <spl.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/onenand.h>
-#include <jffs2/load_kernel.h>
-#include <mtd_node.h>
-#include <fdt_support.h>
-#include "igep00x0.h"
-
-static const struct ns16550_platdata igep_serial = {
- .base = OMAP34XX_UART3,
- .reg_shift = 2,
- .clock = V_NS16550_CLK,
- .fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(igep_uart) = {
- "ns16550_serial",
- &igep_serial
-};
-
-/*
- * Routine: get_board_revision
- * Description: GPIO_28 and GPIO_129 are used to read board and revision from
- * IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from
- * IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because
- * this functionality is shared by USB HOST.
- * Once USB reset is applied, U-boot configures these pins as input pullup to
- * detect board and revision:
- * IGEP0020-RF = 0b00
- * IGEP0020-RC = 0b01
- * IGEP0030-RG = 0b10
- * IGEP0030-RE = 0b11
- */
-static int get_board_revision(void)
-{
- int revision;
-
- gpio_request(IGEP0030_USB_TRANSCEIVER_RESET,
- "igep0030_usb_transceiver_reset");
- gpio_direction_output(IGEP0030_USB_TRANSCEIVER_RESET, 0);
-
- gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection");
- gpio_direction_input(GPIO_IGEP00X0_BOARD_DETECTION);
- revision = 2 * gpio_get_value(GPIO_IGEP00X0_BOARD_DETECTION);
- gpio_free(GPIO_IGEP00X0_BOARD_DETECTION);
-
- gpio_request(GPIO_IGEP00X0_REVISION_DETECTION,
- "igep00x0_revision_detection");
- gpio_direction_input(GPIO_IGEP00X0_REVISION_DETECTION);
- revision = revision + gpio_get_value(GPIO_IGEP00X0_REVISION_DETECTION);
- gpio_free(GPIO_IGEP00X0_REVISION_DETECTION);
-
- gpio_free(IGEP0030_USB_TRANSCEIVER_RESET);
-
- return revision;
-}
-
-int onenand_board_init(struct mtd_info *mtd)
-{
- if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
- struct onenand_chip *this = mtd->priv;
- this->base = (void *)CONFIG_SYS_ONENAND_BASE;
- return 0;
- }
- return 1;
-}
-
-#if defined(CONFIG_CMD_NET)
-static void reset_net_chip(int gpio)
-{
- if (!gpio_request(gpio, "eth nrst")) {
- gpio_direction_output(gpio, 1);
- udelay(1);
- gpio_set_value(gpio, 0);
- udelay(40);
- gpio_set_value(gpio, 1);
- mdelay(10);
- }
-}
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
- };
-
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
- CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
-
- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
- &ctrl_base->gpmc_nadv_ale);
-
- reset_net_chip(64);
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SMC911X
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#else
- return 0;
-#endif
-}
-#else
-static inline void setup_net_chip(void) {}
-#endif
-
-#ifdef CONFIG_OF_BOARD_SETUP
-static int ft_enable_by_compatible(void *blob, char *compat, int enable)
-{
- int off = fdt_node_offset_by_compatible(blob, -1, compat);
- if (off < 0)
- return off;
-
- if (enable)
- fdt_status_okay(blob, off);
- else
- fdt_status_disabled(blob, off);
-
- return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_FDT_FIXUP_PARTITIONS
- static const struct node_info nodes[] = {
- { "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
- { "ti,omap2-onenand", MTD_DEV_TYPE_ONENAND, },
- };
-
- fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-#endif
- ft_enable_by_compatible(blob, "ti,omap2-nand",
- gpmc_cs0_flash == MTD_DEV_TYPE_NAND);
- ft_enable_by_compatible(blob, "ti,omap2-onenand",
- gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND);
-
- return 0;
-}
-#endif
-
-void set_led(void)
-{
- switch (get_board_revision()) {
- case 0:
- case 1:
- gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led");
- gpio_direction_output(IGEP0020_GPIO_LED, 1);
- break;
- case 2:
- case 3:
- gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led");
- gpio_direction_output(IGEP0030_GPIO_LED, 0);
- break;
- default:
- /* Should not happen... */
- break;
- }
-}
-
-void set_boardname(void)
-{
- char rev[5] = { 'F','C','G','E', };
- int i = get_board_revision();
-
- rev[i+1] = 0;
- env_set("board_rev", rev + i);
- env_set("board_name", i < 2 ? "igep0020" : "igep0030");
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
- t2_t *t2_base = (t2_t *)T2_BASE;
- u32 pbias_lite;
-
- twl4030_power_init();
-
- /* set VSIM to 1.8V */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
- TWL4030_PM_RECEIVER_VSIM_VSEL_18,
- TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
-
- /* set up dual-voltage GPIOs to 1.8V */
- pbias_lite = readl(&t2_base->pbias_lite);
- pbias_lite &= ~PBIASLITEVMODE1;
- pbias_lite |= PBIASLITEPWRDNZ1;
- writel(pbias_lite, &t2_base->pbias_lite);
- if (get_cpu_family() == CPU_OMAP36XX)
- writel(readl(OMAP34XX_CTRL_WKUP_CTRL) |
- OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
- OMAP34XX_CTRL_WKUP_CTRL);
-
- setup_net_chip();
-
- omap_die_id_display();
-
- set_led();
-
- set_boardname();
-
- return 0;
-}
-
-void board_mtdparts_default(const char **mtdids, const char **mtdparts)
-{
- struct mtd_info *mtd = get_mtd_device(NULL, 0);
- if (mtd) {
- static char ids[24];
- static char parts[48];
- const char *linux_name = "omap2-nand";
- if (strncmp(mtd->name, "onenand0", 8) == 0)
- linux_name = "omap2-onenand";
- snprintf(ids, sizeof(ids), "%s=%s", mtd->name, linux_name);
- snprintf(parts, sizeof(parts), "mtdparts=%s:%dk(SPL),-(UBI)",
- linux_name, 4 * mtd->erasesize >> 10);
- *mtdids = ids;
- *mtdparts = parts;
- }
-}
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
deleted file mode 100644
index aa532acad95..00000000000
--- a/board/isee/igep00x0/igep00x0.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- */
-#ifndef _IGEP00X0_H_
-#define _IGEP00X0_H_
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_DEFAULT()\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
- MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\
- MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\
- MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\
- MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\
- MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\
- MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\
- MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\
- MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\
- MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\
- MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\
- MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\
- MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\
- MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\
- MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\
- MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\
- MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1 */\
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPIO_nCS2 */\
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPIO_nCS3 */\
- MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4 */\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5 */\
- MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0 */\
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA */\
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL */\
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K */\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\
- MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | EN | M4)) /* GPIO_28 */\
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M4)) /* GPIO_54 */\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64 */\
- MUX_VAL(CP(GPIO129), (IEN | PTU | EN | M4)) /* GPIO_129 */\
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */
-#endif
diff --git a/board/isee/igep00x0/spl.c b/board/isee/igep00x0/spl.c
deleted file mode 100644
index e092e1a418b..00000000000
--- a/board/isee/igep00x0/spl.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <jffs2/load_kernel.h>
-#include <linux/mtd/rawnand.h>
-#include "igep00x0.h"
-
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
- int mfr, id, err = identify_nand_chip(&mfr, &id);
-
- timings->mr = MICRON_V_MR_165;
- if (!err) {
- switch (mfr) {
- case NAND_MFR_HYNIX:
- timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
- timings->ctrla = HYNIX_V_ACTIMA_200;
- timings->ctrlb = HYNIX_V_ACTIMB_200;
- break;
- case NAND_MFR_MICRON:
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
- break;
- default:
- /* Should not happen... */
- break;
- }
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
- } else {
- if (get_cpu_family() == CPU_OMAP34XX) {
- timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_165;
- timings->ctrlb = NUMONYX_V_ACTIMB_165;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
- } else {
- timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
- timings->ctrla = NUMONYX_V_ACTIMA_200;
- timings->ctrlb = NUMONYX_V_ACTIMB_200;
- timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
- }
- gpmc_cs0_flash = MTD_DEV_TYPE_ONENAND;
- }
-}
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- if (serial_tstc() && serial_getc() == 'c')
- return 1;
-
- return 0;
-}
-#endif
diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig
deleted file mode 100644
index 383648789c5..00000000000
--- a/configs/igep0032_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TARGET_OMAP3_IGEP00X0=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTDELAY=3
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_SPL_EXT_SUPPORT is not set
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_ONENAND_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_ONENAND=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_TWL4030_USB=y
-CONFIG_FAT_WRITE=y
-CONFIG_UBIFS_SILENCE_MSG=y
-CONFIG_BCH=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
deleted file mode 100644
index f2989e34e12..00000000000
--- a/configs/igep00x0_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TARGET_OMAP3_IGEP00X0=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTDELAY=3
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_SPL_EXT_SUPPORT is not set
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_ONENAND_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_ONENAND=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_CONS_INDEX=3
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_TWL4030_USB=y
-CONFIG_FAT_WRITE=y
-CONFIG_UBIFS_SILENCE_MSG=y
-CONFIG_BCH=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
deleted file mode 100644
index b9d65697521..00000000000
--- a/include/configs/omap3_igep00x0.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Common configuration settings for IGEP technology based boards
- *
- * (C) Copyright 2012
- * ISEE 2007 SL, <www.iseebcn.com>
- */
-
-#ifndef __IGEP00X0_H
-#define __IGEP00X0_H
-
-#include <configs/ti_omap3_common.h>
-
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
-
-#define CONFIG_REVISION_TAG 1
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */
-#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */
-
-/* TPS65950 */
-#define PBIASLITEVMODE1 (1 << 8)
-
-/* LED */
-#define IGEP0020_GPIO_LED 27
-#define IGEP0030_GPIO_LED 16
-
-/* Board and revision detection GPIOs */
-#define IGEP0030_USB_TRANSCEIVER_RESET 54
-#define GPIO_IGEP00X0_BOARD_DETECTION 28
-#define GPIO_IGEP00X0_REVISION_DETECTION 129
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "IGEP"
-
-#ifndef CONFIG_SPL_BUILD
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-#define MEM_LAYOUT_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- "scriptaddr=0x87E00000\0" \
- "pxefile_addr_r=0x87F00000\0"
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0)
-
-#include <config_distro_bootcmd.h>
-
-#define ENV_FINDFDT \
- "findfdt="\
- "if test ${board_name} = igep0020; then " \
- "if test ${board_rev} = F; then " \
- "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
- "else " \
- "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
- "if test ${board_name} = igep0030; then " \
- "if test ${board_rev} = G; then " \
- "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
- "else " \
- "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
- "if test ${fdtfile} = ''; then " \
- "echo WARNING: Could not determine device tree to use; fi; \0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- ENV_FINDFDT \
- ENV_DEVICE_SETTINGS \
- MEM_LAYOUT_SETTINGS \
- BOOTENV
-
-#endif
-
-#define CONFIG_SYS_MTDPARTS_RUNTIME
-
-/* OneNAND config */
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
-
-/* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
- 10, 11, 12, 13, 14, 15, 16, 17, \
- 18, 19, 20, 21, 22, 23, 24, 25, \
- 26, 27, 28, 29, 30, 31, 32, 33, \
- 34, 35, 36, 37, 38, 39, 40, 41, \
- 42, 43, 44, 45, 46, 47, 48, 49, \
- 50, 51, 52, 53, 54, 55, 56, 57, }
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS 4096
-#define CONFIG_SPL_UBI_VOL_IDS 8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
-#define CONFIG_SPL_UBI_PEB_OFFSET 4
-#define CONFIG_SPL_UBI_VID_OFFSET 512
-#define CONFIG_SPL_UBI_LEB_START 2048
-#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
-
-/* environment organization */
-#define CONFIG_ENV_UBI_PART "UBI"
-#define CONFIG_ENV_UBI_VOLUME "config"
-#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
-#define CONFIG_ENV_SIZE (32*1024)
-
-#endif /* __IGEP00X0_H */
--
2.19.1.1215.g8438c0b245-goog
next prev parent reply other threads:[~2018-11-19 15:53 UTC|newest]
Thread overview: 210+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 15:52 [U-Boot] [PATCH 00/93] dm: Move towards completing CONFIG_BLK migration Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 01/93] Add a simple script to remove boards Simon Glass
2018-11-19 18:19 ` Adam Ford
2018-11-26 22:24 ` Simon Glass
2018-11-27 0:08 ` Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 02/93] dm: mmc: Use CONFIG_IS_ENABLED to check for BLK Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 03/93] solidrun: Correct typo in MAINTAINERS Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 04/93] arm: Remove s32v234evb board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 05/93] arm: Remove ls1043ardb_sdcard_SECURE_BOOT board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 06/93] arm: Remove ls1046ardb_sdcard_SECURE_BOOT board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 07/93] arm: Remove colibri_imx6_nospl board Simon Glass
2018-11-19 21:32 ` Marek Vasut
2018-11-19 15:52 ` [U-Boot] [PATCH 08/93] arm: Remove guruplug board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 09/93] arm: Remove sniper board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 10/93] arm: Remove omap3_zoom1 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 11/93] arm: Remove sksimx6 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 12/93] arm: Remove tbs2910 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 13/93] arm: Remove theadorable_debug board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 14/93] arm: Remove devkit3250 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 15/93] arm: Remove pcm051_rev3 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 16/93] arm: Remove ds109 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 17/93] arm: Remove pcm058 board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 18/93] arm: Remove am335x_shc_ict board Simon Glass
2018-11-19 15:52 ` [U-Boot] [PATCH 19/93] arm: Remove vining_2000 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 20/93] arm: Remove cm_t43 board Simon Glass
2018-11-19 21:32 ` Marek Vasut
2018-11-19 15:53 ` Simon Glass [this message]
2018-11-19 15:53 ` [U-Boot] [PATCH 22/93] arm: Remove sheevaplug board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 23/93] arm: Remove omap3_overo board Simon Glass
[not found] ` <CAGDS+nkiuiUPGzwtU9kH1jG_hP-Xk7pZcsc7HoZw9PH34xt8jQ@mail.gmail.com>
[not found] ` <CALYyQ17Zn1yhjGA1qWTyP3E4umy+9PjvAdP1DWwqXbVA9rv7Cg@mail.gmail.com>
2018-11-20 13:20 ` Andrew C. Smith
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 24/93] arm: Remove am335x_boneblack board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 25/93] arm: Remove warp7 board Simon Glass
2018-11-19 17:56 ` Fabio Estevam
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 26/93] arm: Remove gwventana_gw5904 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 27/93] arm: Remove cairo board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 28/93] arm: Remove pico-hobbit-imx7d board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 29/93] arm: Remove mccmon6_sd board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 30/93] arm: Remove apalis_imx6_nospl_it board Simon Glass
2018-11-19 21:33 ` Marek Vasut
2018-11-19 15:53 ` [U-Boot] [PATCH 31/93] arm: Remove wandboard board Simon Glass
2018-11-19 21:33 ` Marek Vasut
2018-11-19 15:53 ` [U-Boot] [PATCH 32/93] arm: Remove birdland_bav335a board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 33/93] arm: Remove gurnard board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 34/93] arm: Remove xpress_spl board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 35/93] arm: Remove udoo_neo board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 36/93] arm: Remove nas220 board Simon Glass
2018-11-21 15:26 ` Evgeni Dobrev
2018-11-21 17:08 ` Tom Rini
2018-11-19 15:53 ` [U-Boot] [PATCH 37/93] arm: Remove am335x_pdu001 board Simon Glass
2018-11-29 10:39 ` Felix Brack
2018-11-29 18:42 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 38/93] arm: Remove snapper9260 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 39/93] arm: Remove pfla02 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 40/93] arm: Remove colibri_pxa270 board Simon Glass
2018-11-26 7:57 ` Marcel Ziswiler
2018-11-26 12:57 ` Tom Rini
2018-11-27 0:08 ` Simon Glass
2018-11-27 12:24 ` Marek Vasut
2018-11-19 15:53 ` [U-Boot] [PATCH 41/93] arm: Remove work_92105 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 42/93] arm: Remove omap3_pandora board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 43/93] arm: Remove cl-som-imx7 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 44/93] arm: Remove devkit8000 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 45/93] arm: Remove pengwyn board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 46/93] arm: Remove dreamplug board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 47/93] arm: Remove mx6sabreauto board Simon Glass
2018-11-19 23:56 ` Peng Fan
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 48/93] arm: Remove imx6q_logic board Simon Glass
2018-11-19 18:10 ` Adam Ford
2018-11-27 0:08 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 49/93] arm: Remove zc5202 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 50/93] arm: Remove imx6dl_mamoj board Simon Glass
2018-11-19 17:22 ` Jagan Teki
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 51/93] arm: Remove omap3_logic_somlv board Simon Glass
2018-11-19 18:07 ` Adam Ford
2018-11-27 0:08 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 52/93] arm: Remove cm_t335 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 53/93] arm: Remove liteboard board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 54/93] arm: Remove am43xx_evm_usbhost_boot board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 55/93] arm: Remove chiliboard board Simon Glass
2018-11-21 13:02 ` Marcin Niestrój
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 56/93] arm: Remove am335x_baltos board Simon Glass
2018-11-20 14:56 ` Yegor Yefremov
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 57/93] arm: Remove kp_imx6q_tpc board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 58/93] arm: Remove lsxhl board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 59/93] arm: Remove udoo board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 60/93] arm: Remove marsboard board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 61/93] arm: Remove mx6sabresd board Simon Glass
2018-11-19 23:58 ` Peng Fan
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 62/93] arm: Remove dh_imx6 board Simon Glass
2018-11-20 12:15 ` Ludwig Zenz
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 63/93] arm: Remove vinco board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 64/93] arm: Remove ls1021atwr_sdcard_ifc_SECURE_BOOT board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 65/93] arm: Remove mx6cuboxi board Simon Glass
2018-11-20 7:52 ` Mark Kettenis
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 66/93] arm: Remove ot1200 board Simon Glass
2018-11-22 9:25 ` Christian Gmeiner
2018-11-22 12:52 ` Tom Rini
2018-11-22 13:24 ` Marek Vasut
2018-11-22 13:28 ` Tom Rini
2018-11-22 13:30 ` Marek Vasut
2018-11-22 13:32 ` Tom Rini
2018-11-22 13:40 ` Marek Vasut
2018-11-22 14:44 ` Simon Goldschmidt
2018-11-22 17:01 ` Tom Rini
2018-11-22 20:50 ` Simon Glass
2018-11-25 21:09 ` Simon Goldschmidt
2018-11-26 3:00 ` Simon Glass
2018-11-26 6:05 ` Simon Goldschmidt
2018-12-05 13:21 ` Simon Glass
2018-12-05 13:38 ` Simon Goldschmidt
2018-12-05 13:54 ` Simon Glass
2018-12-05 14:16 ` Simon Goldschmidt
2018-12-05 15:55 ` Simon Glass
2018-12-05 16:11 ` Simon Goldschmidt
2018-11-23 0:33 ` Fabio Estevam
2018-11-19 15:53 ` [U-Boot] [PATCH 67/93] arm: Remove socfpga_stratix10 board Simon Glass
2018-11-21 1:01 ` Ley Foon Tan
2018-11-22 20:50 ` Simon Glass
2018-11-22 23:25 ` Tom Rini
2018-11-23 12:04 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 68/93] arm: Remove am65x_evm_a53 board Simon Glass
2018-11-19 16:58 ` Lokesh Vutla
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 69/93] arm: Remove ap143 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 70/93] arm: Remove ap121 board Simon Glass
2018-11-22 0:47 ` Daniel Schwierzeck
2018-11-22 0:53 ` Tom Rini
2018-11-22 20:50 ` Simon Glass
2018-11-22 23:23 ` Tom Rini
2018-11-24 19:42 ` Simon Glass
2018-11-24 21:22 ` Tom Rini
2018-11-19 15:53 ` [U-Boot] [PATCH 71/93] arm: Remove imgtec_xilfpga board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 72/93] arm: Remove socfpga_de0_nano_soc board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 73/93] arm: Remove clearfog board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 74/93] arm: Remove socfpga_arria10 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 75/93] arm: Remove omap3_beagle board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 76/93] arm: Remove helios4 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 77/93] arm: Remove socfpga_socrates board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 78/93] arm: Remove socfpga_sr1500 board Simon Glass
2018-11-19 15:53 ` [U-Boot] [PATCH 79/93] arm: Remove ls1021aiot_sdcard board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 80/93] arm: Remove socfpga_de10_nano board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 81/93] arm: Remove socfpga_dbm_soc1 board Simon Glass
2018-11-19 21:17 ` Marek Vasut
2018-11-19 15:54 ` [U-Boot] [PATCH 82/93] arm: Remove socfpga_de1_soc board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 83/93] arm: Remove socfpga_sockit board Simon Glass
2018-11-19 20:54 ` Marek Vasut
2018-11-19 15:54 ` [U-Boot] [PATCH 84/93] arm: Remove dns325 board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 85/93] arm: Remove socfpga_is1 board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 86/93] arm: Remove brppt1_mmc board Simon Glass
2018-11-20 11:08 ` Hannes Schmelzer
2018-11-22 20:50 ` Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 87/93] arm: Remove db-mv784mp-gp board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 88/93] arm: Remove socfpga_arria5 board Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 89/93] arm: Remove socfpga_vining_fpga board Simon Glass
2018-11-19 21:16 ` Marek Vasut
2018-11-19 15:54 ` [U-Boot] [PATCH 90/93] arm: Remove dra7xx_evm and dra7xx_hs_evm boards Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 91/93] dm: Enable CONFIG_BLK Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 92/93] dm: Update driver-model migration schedule for CONFIG_BLK Simon Glass
2018-11-19 15:54 ` [U-Boot] [PATCH 93/93] RFC: dm: Force CONFIG_BLK for all boards with DM Simon Glass
2018-11-19 16:08 ` [U-Boot] [PATCH 00/93] dm: Move towards completing CONFIG_BLK migration Otavio Salvador
2018-11-19 18:36 ` Tom Rini
2018-11-19 19:45 ` Adam Ford
2018-11-19 21:32 ` Marek Vasut
2018-11-19 21:54 ` Tom Rini
2018-11-19 21:58 ` Simon Glass
2018-11-20 14:29 ` Ian Campbell
2018-11-20 14:56 ` Tom Rini
2018-11-21 4:43 ` Simon Glass
2018-11-21 13:26 ` Tom Rini
2018-11-19 22:02 ` Adam Ford
2018-11-19 22:06 ` Marek Vasut
2018-11-20 11:00 ` Stefano Babic
2018-11-20 12:39 ` Peter Robinson
2018-11-20 14:55 ` Tom Rini
2018-11-20 16:27 ` Stefano Babic
2018-11-20 17:18 ` Tom Rini
2018-11-19 22:05 ` Marek Vasut
2018-11-20 12:42 ` Soeren Moch
2018-11-20 13:37 ` Tom Rini
2018-11-20 13:40 ` Marek Vasut
2018-11-20 13:42 ` Tom Rini
2018-11-20 13:45 ` Marek Vasut
2018-11-20 13:53 ` Tom Rini
2018-11-20 13:55 ` Marek Vasut
2018-11-21 15:10 ` Tom Rini
2018-11-22 20:50 ` Simon Glass
2018-11-22 23:31 ` Tom Rini
2018-11-23 12:04 ` Simon Glass
2018-11-23 19:38 ` Tom Rini
2018-11-24 19:41 ` Simon Glass
2018-11-26 1:12 ` Tom Rini
2018-11-26 2:59 ` Simon Glass
2018-11-23 0:31 ` Fabio Estevam
2018-11-23 14:35 ` Soeren Moch
2018-11-21 15:13 ` [U-Boot] [PATCH] omap3: beagle: Enable DM_MMC and BLK for u-boot only, not SPL Guillaume GARDET
2018-11-21 17:06 ` Tom Rini
2018-12-17 17:03 ` Guillaume Gardet
2018-12-17 19:34 ` Adam Ford
2018-12-17 20:44 ` Adam Ford
2018-12-18 1:41 ` Tom Rini
2018-11-22 17:45 ` [U-Boot] [PATCH 00/93] dm: Move towards completing CONFIG_BLK migration Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181119155413.158098-22-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.