[PATCH 5.15 000/247] 5.15.47-rc1 review

[PATCH 5.15 000/247] 5.15.47-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.47 release.
There are 247 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.47-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.47-rc1

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    zonefs: fix handling of explicit_open option on mount

Johan Hovold <johan+linaro@kernel.org>
    PCI: qcom: Fix pipe clock imbalance

Davide Caratti <dcaratti@redhat.com>
    net/sched: act_police: more accurate MTU policing

Pascal Hambourg <pascal@plouf.fr.eu.org>
    md/raid0: Ignore RAID0 layout if the second zone has only one device

Jason A. Donenfeld <Jason@zx2c4.com>
    random: account for arch randomness in bits

Jason A. Donenfeld <Jason@zx2c4.com>
    random: mark bootloader randomness code as __init

Jason A. Donenfeld <Jason@zx2c4.com>
    random: avoid checking crng_ready() twice in random_init()

KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
    drm/ast: Create threshold values for AST2600

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/mm: Switch obsolete dssall to .long

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/32: Fix overread/overwrite of thread_struct via ptrace

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: update VCN codec support for Yellow Carp

Brian Norris <briannorris@chromium.org>
    drm/atomic: Force bridge self-refresh-exit on CRTC switch

Brian Norris <briannorris@chromium.org>
    drm/bridge: analogix_dp: Support PSR-exit to disable transition

Michael Ellerman <mpe@ellerman.id.au>
    powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK

Xie Yongji <xieyongji@bytedance.com>
    vduse: Fix NULL pointer dereference on sysfs access

Mathias Nyman <mathias.nyman@linux.intel.com>
    Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

Olivier Matz <olivier.matz@6wind.com>
    ixgbe: fix unexpected VLAN Rx in promisc mode on VF

Olivier Matz <olivier.matz@6wind.com>
    ixgbe: fix bcast packets Rx on VF after promisc removal

Martin Faltesek <mfaltesek@google.com>
    nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION

Martin Faltesek <mfaltesek@google.com>
    nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

Martin Faltesek <mfaltesek@google.com>
    nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

Jchao Sun <sunjunchao2870@gmail.com>
    writeback: Fix inode->i_io_list not be protected by inode->i_lock error

Ilya Maximets <i.maximets@ovn.org>
    net: openvswitch: fix misuse of the cached connection on tuple changes

Tan Tee Min <tee.min.tan@linux.intel.com>
    net: phy: dp83867: retrigger SGMII AN when link change

Adrian Hunter <adrian.hunter@intel.com>
    mmc: block: Fix CQE recovery reset success

Sergey Shtylyov <s.shtylyov@omp.ru>
    ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

David Safford <david.safford@gmail.com>
    KEYS: trusted: tpm2: Fix migratable logic

Paulo Alcantara <pc@cjr.nz>
    cifs: fix reconnect on smb3 mount types

Shyam Prasad N <sprasad@microsoft.com>
    cifs: return errors during session setup during reconnects

Jeremy Soller <jeremy@system76.com>
    ALSA: hda/realtek: Add quirk for HP Dev One

Cameron Berkenpas <cam@neo-zeon.de>
    ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021

huangwenhui <huangwenhuia@uniontech.com>
    ALSA: hda/conexant - Fix loopback issue with CX20632

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Set up (implicit) sync for Saffire 6

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Skip generic sync EP parse for secondary EP

Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
    scripts/gdb: change kernel config dumping method

Xie Yongji <xieyongji@bytedance.com>
    vringh: Fix loop descriptors check in the indirect cases

Kees Cook <keescook@chromium.org>
    nodemask: Fix return values to be unsigned

Yury Norov <yury.norov@gmail.com>
    drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate

Steve French <stfrench@microsoft.com>
    cifs: version operations for smb20 unneeded when legacy support disabled

Christian Borntraeger <borntraeger@linux.ibm.com>
    s390/gmap: voluntarily schedule during key setting

Yu Kuai <yukuai3@huawei.com>
    nbd: fix io hung while disconnecting device

Yu Kuai <yukuai3@huawei.com>
    nbd: fix race between nbd_alloc_config() and module removal

Yu Kuai <yukuai3@huawei.com>
    nbd: call genl_unregister_family() first in nbd_cleanup()

Peter Zijlstra <peterz@infradead.org>
    jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

Peter Zijlstra <peterz@infradead.org>
    x86/cpu: Elide KCSAN for cpu_has() and friends

Masahiro Yamada <masahiroy@kernel.org>
    modpost: fix undefined behavior of is_arm_mapping_symbol()

Johannes Berg <johannes.berg@intel.com>
    um: line: Use separate IRQs per line

Lijo Lazar <lijo.lazar@amd.com>
    drm/amd/pm: Fix missing thermal throttler status

Gong Yuanjun <ruc_gongyuanjun@163.com>
    drm/radeon: fix a possible null pointer dereference

David Galiffi <David.Galiffi@amd.com>
    drm/amd/display: Check if modulo is 0 before dividing.

Xiubo Li <xiubli@redhat.com>
    ceph: flush the mdlog for filesystem sync

Venky Shankar <vshankar@redhat.com>
    ceph: allow ceph.dir.rctime xattr to be updatable

Michal Kubecek <mkubecek@suse.cz>
    Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"

Hannes Reinecke <hare@suse.de>
    scsi: myrb: Fix up null pointer access on myrb_cleanup()

Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
    md: protect md_unregister_thread from reentrancy

Liu Xinpeng <liuxp11@chinatelecom.cn>
    watchdog: wdat_wdt: Stop watchdog when rebooting the system

Hao Luo <haoluo@google.com>
    kernfs: Separate kernfs_pr_cont_buf and rename_lock.

John Ogness <john.ogness@linutronix.de>
    serial: msm_serial: disable interrupts in __msm_console_write()

Wang Cheng <wanngchenng@gmail.com>
    staging: rtl8712: fix uninit-value in r871xu_drv_init()

Wang Cheng <wanngchenng@gmail.com>
    staging: rtl8712: fix uninit-value in usb_read8() and friends

Andre Przywara <andre.przywara@arm.com>
    clocksource/drivers/sp804: Avoid error on multiple instances

bumwoo lee <bw365.lee@samsung.com>
    extcon: Modify extcon device to be created after driver data is set

Dan Carpenter <dan.carpenter@oracle.com>
    extcon: Fix extcon_get_extcon_dev() error handling

Shuah Khan <skhan@linuxfoundation.org>
    misc: rtsx: set NULL intfdata when probe fails

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    soundwire: qcom: adjust autoenumeration timeout

Marek Szyprowski <m.szyprowski@samsung.com>
    usb: dwc2: gadget: don't reset gadget's driver->bus

Changbin Du <changbin.du@intel.com>
    sysrq: do not omit current cpu when showing backtrace of all active CPUs

Hangyu Hua <hbh25y@gmail.com>
    char: xillybus: fix a refcount leak in cleanup_dev()

Evan Green <evgreen@chromium.org>
    USB: hcd-pci: Fully suspend across freeze/thaw cycle

Duoming Zhou <duoming@zju.edu.cn>
    drivers: usb: host: Fix deadlock in oxu_bus_suspend()

Duoming Zhou <duoming@zju.edu.cn>
    drivers: tty: serial: Fix deadlock in sa1100_set_termios()

Zhen Ni <nizhen@uniontech.com>
    USB: host: isp116x: check return value after calling platform_get_resource()

Duoming Zhou <duoming@zju.edu.cn>
    drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

Duoming Zhou <duoming@zju.edu.cn>
    drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Use different lane for second DisplayPort tunnel

Huang Guobin <huangguobin4@huawei.com>
    tty: Fix a possible resource leak in icom_probe

Zheyu Ma <zheyuma97@gmail.com>
    tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

Duoming Zhou <duoming@zju.edu.cn>
    drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()

Duoming Zhou <duoming@zju.edu.cn>
    drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()

Kees Cook <keescook@chromium.org>
    lkdtm/usercopy: Expand size of "out of frame" object

Miquel Raynal <miquel.raynal@bootlin.com>
    iio: st_sensors: Add a local lock for protecting odr

Xiaoke Wang <xkernel.wang@foxmail.com>
    staging: rtl8712: fix a potential memory leak in r871xu_drv_init()

Xiaoke Wang <xkernel.wang@foxmail.com>
    iio: dummy: iio_simple_dummy: check the return value of kstrdup()

David Howells <dhowells@redhat.com>
    iov_iter: Fix iter_xarray_get_pages{,_alloc}()

Etienne van der Linde <etienne.vanderlinde@corigine.com>
    nfp: flower: restructure flow-key for gre+vlan combination

Linus Torvalds <torvalds@linux-foundation.org>
    drm: imx: fix compiler warning with gcc-12

Muchun Song <songmuchun@bytedance.com>
    tcp: use alloc_large_system_hash() to allocate table_perturb

Marek Behún <kabel@kernel.org>
    net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete

Miaoqian Lin <linmq006@gmail.com>
    net: altera: Fix refcount leak in altera_tse_mdio_create

Willem de Bruijn <willemb@google.com>
    ip_gre: test csum_start instead of transport header

Mark Bloch <mbloch@nvidia.com>
    net/mlx5: fs, fail conflicting actions

Feras Daoud <ferasda@nvidia.com>
    net/mlx5: Rearm the FW tracer after each tracer event

Saeed Mahameed <saeedm@nvidia.com>
    net/mlx5: Fix mlx5_get_next_dev() peer device matching

Mark Bloch <mbloch@nvidia.com>
    net/mlx5: Lag, filter non compatible devices

Masahiro Yamada <masahiroy@kernel.org>
    net: ipv6: unexport __init-annotated seg6_hmac_init()

Masahiro Yamada <masahiroy@kernel.org>
    net: xfrm: unexport __init-annotated xfrm4_protocol_init()

Masahiro Yamada <masahiroy@kernel.org>
    net: mdio: unexport __init-annotated mdio_bus_init()

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    xsk: Fix handling of invalid descriptors in XSK TX batching API

Magnus Karlsson <magnus.karlsson@intel.com>
    i40e: xsk: Move tmp desc array from driver to pool

Gal Pressman <gal@nvidia.com>
    net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure

Miaoqian Lin <linmq006@gmail.com>
    net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list

Eric Dumazet <edumazet@google.com>
    bpf, arm64: Clear prog->jited_len along prog->jited

Kuniyuki Iwashima <kuniyu@amazon.com>
    af_unix: Fix a data-race in unix_dgram_peer_wake_me().

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    stmmac: intel: Fix an error handling path in intel_eth_pci_probe()

Masahiro Yamada <masahiroy@kernel.org>
    xen: unexport __init-annotated xen_xlate_map_ballooned_pages()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: bail out early if hardware offload is not supported

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: memleak flow rule from commit path

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: release new hooks on unsupported flowtable flags

Miaoqian Lin <linmq006@gmail.com>
    ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: always initialize flowtable hook list in transaction

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Trap RDMA segment overflows

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/kasan: Force thread size increase with KASAN

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: delete flowtable hooks via transaction list

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path

Florian Westphal <fw@strlen.de>
    netfilter: nat: really support inet nat without l3 address

Marek Vasut <marex@denx.de>
    drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()

Kinglong Mee <kinglongmee@gmail.com>
    xprtrdma: treat all calls not a bcall when bc_serv is NULL

Chao Yu <chao@kernel.org>
    f2fs: fix to tag gcing flag on page during file defragment

Greg Ungerer <gerg@linux-m68k.org>
    m68knommu: fix undefined reference to `mach_get_rtc_pll'

Liao Chang <liaochang1@huawei.com>
    RISC-V: use memcpy for kexec_file mode

Yang Yingliang <yangyingliang@huawei.com>
    video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()

Saurabh Sengar <ssengar@linux.microsoft.com>
    video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Don't hold the layoutget locks across multiple RPC calls

Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
    dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type

Greg Ungerer <gerg@linux-m68k.org>
    m68knommu: fix undefined reference to `_init_sp'

Greg Ungerer <gerg@linux-m68k.org>
    m68knommu: set ZERO_PAGE() to the allocated zeroed page

Lucas Tanure <tanureal@opensource.cirrus.com>
    i2c: cadence: Increase timeout per message if necessary

Dongliang Mu <mudongliangabcd@gmail.com>
    f2fs: remove WARN_ON in f2fs_is_valid_blkaddr

Yang Yingliang <yangyingliang@huawei.com>
    iommu/arm-smmu-v3: check return value after calling platform_get_resource()

Yang Yingliang <yangyingliang@huawei.com>
    iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe()

Mark-PK Tsai <mark-pk.tsai@mediatek.com>
    tracing: Avoid adding tracer option before update_tracer_options

Jun Miao <jun.miao@intel.com>
    tracing: Fix sleeping function called from invalid context on RT kernel

Jeff Xie <xiehuan09@gmail.com>
    tracing: Make tp_printk work on syscall tracepoints

Masami Hiramatsu <mhiramat@kernel.org>
    bootconfig: Make the bootconfig.o as a normal object file

Gong Yuanjun <ruc_gongyuanjun@163.com>
    mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

Dave Jiang <dave.jiang@intel.com>
    dmaengine: idxd: set DMA_INTERRUPT cap bit

Leo Yan <leo.yan@linaro.org>
    perf c2c: Fix sorting in percent_rmt_hitm_cmp()

Saravana Kannan <saravanak@google.com>
    driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction

Hoang Le <hoang.h.le@dektech.com.au>
    tipc: check attribute length for bearer name

Damien Le Moal <damien.lemoal@opensource.wdc.com>
    scsi: sd: Fix potential NULL pointer dereference

David Howells <dhowells@redhat.com>
    afs: Fix infinite loop found by xfstest generic/676

Haibo Chen <haibo.chen@nxp.com>
    gpio: pca953x: use the correct register address to do regcache sync

Fabien Parent <fparent@baylibre.com>
    regulator: mt6315-regulator: fix invalid allowed mode

Alexander Gordeev <agordeev@linux.ibm.com>
    s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag

Dan Carpenter <dan.carpenter@oracle.com>
    octeontx2-af: fix error code in is_valid_offset()

Jason Wang <jasowang@redhat.com>
    vdpa: ifcvf: set pci driver data in probe

Eric Dumazet <edumazet@google.com>
    tcp: tcp_rtx_synack() can be called from process context

Guoju Fang <gjfang@linux.alibaba.com>
    net: sched: add barrier to fix packet stuck problem for lockless qdisc

Maxim Mikityanskiy <maximmi@nvidia.com>
    net/mlx5e: Update netdev features after changing XDP state

Changcheng Liu <jerrliu@nvidia.com>
    net/mlx5: correct ECE offset in query qp output

Paul Blakey <paulb@nvidia.com>
    net/mlx5: CT: Fix header-rewrite re-use for tupels

Maor Dickman <maord@nvidia.com>
    net/mlx5e: TC NIC mode, fix tc chains miss table

Leon Romanovsky <leon@kernel.org>
    net/mlx5: Don't use already freed action pointer

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    virtio: pci: Fix an error handling path in vp_modern_probe()

Eli Cohen <elic@nvidia.com>
    vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit

Jens Axboe <axboe@kernel.dk>
    block: make bioset_exit() fully resilient against being called twice

Íñigo Huguet <ihuguet@redhat.com>
    sfc: fix wrong tx channel offset with efx_separate_tx_channels

Martin Habets <habetsm.xilinx@gmail.com>
    sfc: fix considering that all channels have TX queues

Yu Xiao <yu.xiao@corigine.com>
    nfp: only report pause frame configuration for physical device

Eric Dumazet <edumazet@google.com>
    tcp: add accessors to read/set tp->snd_cwnd

Guangguan Wang <guangguan.wang@linux.alibaba.com>
    net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct smc_wr_tx_pend_priv *"

Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
    riscv: read-only pages should not be writable

Christoph Hellwig <hch@lst.de>
    block: take destination bvec offsets into account in bio_copy_data_iter

Menglong Dong <imagedong@tencent.com>
    bpf: Fix probe read error in ___bpf_prog_run()

Song Liu <song@kernel.org>
    selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_read

Andrii Nakryiko <andrii@kernel.org>
    selftests/bpf: fix selftest after random: Urandom_read tracepoint removal

Zhihao Cheng <chengzhihao1@huawei.com>
    ubi: ubi_create_volume: Fix use-after-free when volume creation failed

Zhihao Cheng <chengzhihao1@huawei.com>
    ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty

Baokun Li <libaokun1@huawei.com>
    jffs2: fix memory leak in jffs2_do_fill_super

Alexander Lobakin <alexandr.lobakin@intel.com>
    modpost: fix removing numeric suffixes

Miaoqian Lin <linmq006@gmail.com>
    net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register

Miaoqian Lin <linmq006@gmail.com>
    net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks

Dan Carpenter <dan.carpenter@oracle.com>
    net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()

Vincent Ray <vray@kalrayinc.com>
    net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog

Jann Horn <jannh@google.com>
    s390/crypto: fix scatterwalk_unmap() callers in AES-GCM

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition

Ming Lei <ming.lei@redhat.com>
    blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx

Miaoqian Lin <linmq006@gmail.com>
    watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe

Miaoqian Lin <linmq006@gmail.com>
    watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking

Zhang Wensheng <zhangwensheng5@huawei.com>
    driver core: fix deadlock in __device_attach

Schspa Shi <schspa@gmail.com>
    driver: base: fix UAF when driver_attach failed

Tony Lindgren <tony@atomide.com>
    bus: ti-sysc: Fix warnings for unbind for serial

Miaoqian Lin <linmq006@gmail.com>
    firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: stm32-usart: Correct CSIZE, bits, and parity

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: st-asc: Sanitize CSIZE and correct PARENB for CS7

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: sifive: Sanitize CSIZE and c_iflag

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: sh-sci: Don't allow CS5-6

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: txx9: Don't allow CS5-6

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: rda-uart: Don't allow CS5-6

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: digicolor-usart: Don't allow CS5-6

YueHaibing <yuehaibing@huawei.com>
    serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE

Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485

John Ogness <john.ogness@linutronix.de>
    serial: meson: acquire port->lock in startup()

Tony Lindgren <tony@atomide.com>
    tty: n_gsm: Fix packet data hex dump output

Tony Lindgren <tony@atomide.com>
    tty: n_gsm: Don't ignore write return value in gsmld_output()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    staging: r8188eu: add check for kzalloc

Miaoqian Lin <linmq006@gmail.com>
    rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe

Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
    rtc: ftrtc010: Use platform_get_irq() to get the interrupt

Yang Yingliang <yangyingliang@huawei.com>
    rtc: mt6397: check return value after calling platform_get_resource()

Howard Chiu <howard_chiu@aspeedtech.com>
    ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1

Samuel Holland <samuel@sholland.org>
    clocksource/drivers/riscv: Events are stopped during CPU suspend

Miaoqian Lin <linmq006@gmail.com>
    soc: rockchip: Fix refcount leak in rockchip_grf_init

Li Jun <jun.li@nxp.com>
    extcon: ptn5150: Add queue work sync before driver release

Xin Xiong <xiongx18@fudan.edu.cn>
    ksmbd: fix reference count leak in smb_check_perm_dacl()

Guilherme G. Piccoli <gpiccoli@igalia.com>
    coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    soundwire: intel: prevent pm_runtime resume prior to system suspend

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    export: fix string handling of namespace in EXPORT_SYMBOL_NS

Maciej W. Rozycki <macro@orcam.me.uk>
    serial: sifive: Report actual baud base rather than fixed 115200

Hans de Goede <hdegoede@redhat.com>
    power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk

Johan Hovold <johan+linaro@kernel.org>
    phy: qcom-qmp: fix pipe-clock imbalance on power-on failure

Guilherme G. Piccoli <gpiccoli@igalia.com>
    misc/pvpanic: Convert regular spinlock into trylock on panic path

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pvpanic: Fix typos in the comments

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails

Cixi Geng <cixi.geng1@unisoc.com>
    iio: adc: sc27xx: Fine tune the scale calibration values

Cixi Geng <cixi.geng1@unisoc.com>
    iio: adc: sc27xx: fix read big scale voltage not right

Miaoqian Lin <linmq006@gmail.com>
    iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeout

Miaoqian Lin <linmq006@gmail.com>
    iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check

Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
    rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl

Hangyu Hua <hbh25y@gmail.com>
    rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()

Hangyu Hua <hbh25y@gmail.com>
    rpmsg: virtio: Fix possible double free in rpmsg_probe()

Bjorn Andersson <bjorn.andersson@linaro.org>
    usb: typec: mux: Check dev_set_name() return value

Xiaomeng Tong <xiam0nd.tong@gmail.com>
    firmware: stratix10-svc: fix a missing check on list iterator

Xiaomeng Tong <xiam0nd.tong@gmail.com>
    misc: fastrpc: fix an incorrect NULL check on list iterator

Zheng Yongjun <zhengyongjun3@huawei.com>
    usb: dwc3: pci: Fix pm_runtime_get_sync() error checking

Wesley Cheng <quic_wcheng@quicinc.com>
    usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: raspberrypi-poe: Fix endianness in firmware struct

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: lp3943: Fix duty calculation in case period was clamped

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    staging: fieldbus: Fix the error handling path in anybuss_host_common_probe()

Miaoqian Lin <linmq006@gmail.com>
    usb: musb: Fix missing of_node_put() in omap2430_probe

Lin Ma <linma@zju.edu.cn>
    USB: storage: karma: fix rio_karma_init return

Niels Dossche <dossche.niels@gmail.com>
    usb: usbip: add missing device lock on tweak configuration cmd

Hangyu Hua <hbh25y@gmail.com>
    usb: usbip: fix a refcount leak in stub_probe()

Peng Fan <peng.fan@nxp.com>
    remoteproc: imx_rproc: Ignore create mem entry for resource table

Sherry Sun <sherry.sun@nxp.com>
    tty: serial: fsl_lpuart: fix potential bug when using both of_alias_get_id and ida_simple_get

Miaoqian Lin <linmq006@gmail.com>
    serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe

Daniel Gibson <daniel@gibson.sh>
    tty: n_tty: Restore EOF push handling behavior

Miaoqian Lin <linmq006@gmail.com>
    tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe

Wang Weiyang <wangweiyang2@huawei.com>
    tty: goldfish: Use tty_port_destroy() to destroy port

Christophe Leroy <christophe.leroy@csgroup.eu>
    lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    lkdtm/bugs: Check for the NULL pointer after calling kmalloc

Alexandru Tachici <alexandru.tachici@analog.com>
    iio: adc: ad7124: Remove shift from scan_type

Jakob Koschel <jakobkoschel@gmail.com>
    staging: greybus: codecs: fix type confusion of list iterator variable

Randy Dunlap <rdunlap@infradead.org>
    pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards


-------------

Diffstat:

 Documentation/ABI/testing/sysfs-ata                | 11 ++--
 .../bindings/regulator/mt6315-regulator.yaml       |  4 +-
 Makefile                                           |  4 +-
 arch/arm/boot/dts/aspeed-ast2600-evb.dts           |  4 +-
 arch/arm64/net/bpf_jit_comp.c                      |  1 +
 arch/m68k/Kconfig.machine                          |  1 +
 arch/m68k/include/asm/pgtable_no.h                 |  3 +-
 arch/m68k/kernel/setup_mm.c                        |  7 ---
 arch/m68k/kernel/setup_no.c                        |  1 -
 arch/m68k/kernel/time.c                            |  9 +++
 arch/mips/kernel/mips-cpc.c                        |  1 +
 arch/powerpc/Kconfig                               |  2 -
 arch/powerpc/include/asm/ppc-opcode.h              |  2 +
 arch/powerpc/include/asm/thread_info.h             | 10 ++-
 arch/powerpc/kernel/idle.c                         |  2 +-
 arch/powerpc/kernel/idle_6xx.S                     |  2 +-
 arch/powerpc/kernel/l2cr_6xx.S                     |  6 +-
 arch/powerpc/kernel/ptrace/ptrace-fpu.c            | 20 ++++--
 arch/powerpc/kernel/ptrace/ptrace.c                |  3 +
 arch/powerpc/kernel/swsusp_32.S                    |  2 +-
 arch/powerpc/kernel/swsusp_asm64.S                 |  2 +-
 arch/powerpc/mm/mmu_context.c                      |  2 +-
 arch/powerpc/platforms/powermac/cache.S            |  4 +-
 arch/riscv/kernel/efi.c                            |  2 +-
 arch/riscv/kernel/machine_kexec.c                  |  4 +-
 arch/s390/crypto/aes_s390.c                        |  4 +-
 arch/s390/kernel/entry.S                           |  6 +-
 arch/s390/mm/gmap.c                                | 14 +++++
 arch/um/drivers/chan_kern.c                        | 10 +--
 arch/um/drivers/line.c                             | 22 ++++---
 arch/um/drivers/line.h                             |  4 +-
 arch/um/drivers/ssl.c                              |  2 -
 arch/um/drivers/stdio_console.c                    |  2 -
 arch/um/include/asm/irq.h                          | 22 +++----
 arch/x86/include/asm/cpufeature.h                  |  2 +-
 block/bio.c                                        |  9 ++-
 block/blk-mq.c                                     |  7 +--
 drivers/ata/libata-transport.c                     |  2 +-
 drivers/ata/pata_octeon_cf.c                       |  3 +
 drivers/base/bus.c                                 |  4 +-
 drivers/base/dd.c                                  | 10 ++-
 drivers/block/nbd.c                                | 37 +++++++----
 drivers/bus/ti-sysc.c                              |  4 +-
 drivers/char/random.c                              | 15 +++--
 drivers/char/xillybus/xillyusb.c                   |  1 +
 drivers/clocksource/timer-oxnas-rps.c              |  2 +-
 drivers/clocksource/timer-riscv.c                  |  2 +-
 drivers/clocksource/timer-sp804.c                  | 10 +--
 drivers/dma/idxd/dma.c                             |  1 +
 drivers/dma/xilinx/zynqmp_dma.c                    |  5 +-
 drivers/extcon/extcon-axp288.c                     |  4 +-
 drivers/extcon/extcon-ptn5150.c                    | 11 ++++
 drivers/extcon/extcon.c                            | 33 ++++++----
 drivers/firmware/dmi-sysfs.c                       |  2 +-
 drivers/firmware/stratix10-svc.c                   | 12 ++--
 drivers/gpio/gpio-pca953x.c                        | 19 +++---
 drivers/gpu/drm/amd/amdgpu/nv.c                    |  1 +
 .../gpu/drm/amd/display/dc/dce/dce_clock_source.c  |  9 ++-
 drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c     |  2 +-
 drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c |  1 +
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c     |  2 +-
 drivers/gpu/drm/ast/ast_mode.c                     |  5 +-
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 42 +++++++++++--
 drivers/gpu/drm/bridge/ti-sn65dsi83.c              | 34 +++++++---
 drivers/gpu/drm/drm_atomic_helper.c                | 16 ++++-
 drivers/gpu/drm/imx/ipuv3-crtc.c                   |  2 +-
 drivers/gpu/drm/radeon/radeon_connectors.c         |  4 ++
 drivers/hwtracing/coresight/coresight-cpu-debug.c  |  7 ++-
 drivers/i2c/busses/i2c-cadence.c                   | 12 +++-
 drivers/iio/adc/ad7124.c                           |  1 -
 drivers/iio/adc/sc27xx_adc.c                       | 20 +++---
 drivers/iio/adc/stmpe-adc.c                        |  8 +--
 drivers/iio/common/st_sensors/st_sensors_core.c    | 24 ++++++--
 drivers/iio/dummy/iio_simple_dummy.c               | 20 +++---
 drivers/iio/proximity/vl53l0x-i2c.c                |  7 +--
 drivers/input/mouse/bcm5974.c                      |  7 ++-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c        |  2 +
 drivers/iommu/arm/arm-smmu/arm-smmu.c              |  5 +-
 drivers/md/md.c                                    | 15 +++--
 drivers/md/raid0.c                                 | 31 +++++-----
 drivers/misc/cardreader/rtsx_usb.c                 |  1 +
 drivers/misc/fastrpc.c                             |  9 +--
 drivers/misc/lkdtm/bugs.c                          | 10 ++-
 drivers/misc/lkdtm/lkdtm.h                         |  8 +--
 drivers/misc/lkdtm/usercopy.c                      | 17 ++++-
 drivers/misc/pvpanic/pvpanic-mmio.c                |  2 +-
 drivers/misc/pvpanic/pvpanic.c                     | 10 ++-
 drivers/mmc/core/block.c                           |  3 +-
 drivers/mtd/ubi/fastmap-wl.c                       | 69 ++++++++++++++-------
 drivers/mtd/ubi/fastmap.c                          | 11 ----
 drivers/mtd/ubi/ubi.h                              |  4 +-
 drivers/mtd/ubi/vmt.c                              |  1 -
 drivers/mtd/ubi/wl.c                               | 19 +++---
 drivers/net/dsa/lantiq_gswip.c                     |  4 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  1 +
 drivers/net/dsa/mv88e6xxx/serdes.c                 | 27 ++++----
 drivers/net/ethernet/altera/altera_tse_main.c      |  6 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 11 ----
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |  1 -
 drivers/net/ethernet/intel/i40e/i40e_xsk.c         |  4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c     |  8 +--
 .../net/ethernet/marvell/octeontx2/af/rvu_cpt.c    |  2 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.c        |  3 +
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c    |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/dev.c      | 72 +++++++++++++++++-----
 .../ethernet/mellanox/mlx5/core/diag/fw_tracer.c   |  7 ++-
 drivers/net/ethernet/mellanox/mlx5/core/en/fs.h    |  2 +
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 19 +++---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  5 ++
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    | 38 +++++++++++-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  | 37 +++++++++--
 drivers/net/ethernet/mellanox/mlx5/core/lag.c      | 12 ++--
 .../net/ethernet/mellanox/mlx5/core/mlx5_core.h    |  1 +
 .../ethernet/mellanox/mlx5/core/steering/fs_dr.c   |  9 ++-
 .../net/ethernet/netronome/nfp/flower/conntrack.c  | 32 +++++-----
 drivers/net/ethernet/netronome/nfp/flower/match.c  | 16 ++---
 .../net/ethernet/netronome/nfp/nfp_net_ethtool.c   |  4 +-
 drivers/net/ethernet/sfc/efx_channels.c            |  6 +-
 drivers/net/ethernet/sfc/net_driver.h              |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c  |  4 +-
 drivers/net/ethernet/ti/am65-cpsw-nuss.c           |  3 +-
 drivers/net/phy/dp83867.c                          | 29 +++++++++
 drivers/net/phy/mdio_bus.c                         |  1 -
 drivers/nfc/st21nfca/se.c                          | 53 +++++++++-------
 drivers/pci/controller/dwc/pcie-qcom.c             |  6 --
 drivers/pcmcia/Kconfig                             |  2 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c                |  2 +-
 drivers/power/supply/axp288_charger.c              | 17 ++---
 drivers/power/supply/axp288_fuel_gauge.c           |  1 -
 drivers/power/supply/charger-manager.c             |  7 +--
 drivers/power/supply/max8997_charger.c             |  8 +--
 drivers/pwm/pwm-lp3943.c                           |  1 +
 drivers/pwm/pwm-raspberrypi-poe.c                  |  2 +-
 drivers/remoteproc/imx_rproc.c                     |  3 +
 drivers/rpmsg/qcom_smd.c                           |  4 +-
 drivers/rpmsg/virtio_rpmsg_bus.c                   |  9 ++-
 drivers/rtc/rtc-ftrtc010.c                         | 38 ++++++++----
 drivers/rtc/rtc-mt6397.c                           |  2 +
 drivers/scsi/myrb.c                                | 11 +++-
 drivers/scsi/sd.c                                  |  1 -
 drivers/soc/rockchip/grf.c                         |  2 +
 drivers/soundwire/intel.c                          |  3 +
 drivers/soundwire/qcom.c                           |  2 +-
 drivers/staging/fieldbus/anybuss/host.c            |  2 +-
 drivers/staging/greybus/audio_codec.c              |  4 +-
 drivers/staging/r8188eu/core/rtw_xmit.c            | 13 +++-
 drivers/staging/r8188eu/include/rtw_xmit.h         |  2 +-
 drivers/staging/rtl8192e/rtllib_softmac.c          |  2 +-
 .../staging/rtl8192u/ieee80211/ieee80211_softmac.c |  2 +-
 drivers/staging/rtl8712/os_intfs.c                 |  1 -
 drivers/staging/rtl8712/usb_intf.c                 | 12 ++--
 drivers/staging/rtl8712/usb_ops.c                  | 27 +++++---
 drivers/staging/rtl8723bs/core/rtw_mlme.c          | 12 ++--
 drivers/thunderbolt/tb.c                           | 19 +++++-
 drivers/thunderbolt/test.c                         | 16 ++---
 drivers/thunderbolt/tunnel.c                       | 11 ++--
 drivers/thunderbolt/tunnel.h                       |  4 +-
 drivers/tty/goldfish.c                             |  2 +
 drivers/tty/n_gsm.c                                | 36 +++++++----
 drivers/tty/n_tty.c                                | 38 +++++++++++-
 drivers/tty/serial/8250/8250_aspeed_vuart.c        |  2 +
 drivers/tty/serial/8250/8250_fintek.c              |  8 +--
 drivers/tty/serial/cpm_uart/cpm_uart_core.c        |  2 +-
 drivers/tty/serial/digicolor-usart.c               |  2 +
 drivers/tty/serial/fsl_lpuart.c                    | 24 ++------
 drivers/tty/serial/icom.c                          |  2 +-
 drivers/tty/serial/meson_uart.c                    | 13 ++++
 drivers/tty/serial/msm_serial.c                    |  5 ++
 drivers/tty/serial/owl-uart.c                      |  1 +
 drivers/tty/serial/rda-uart.c                      |  2 +
 drivers/tty/serial/sa1100.c                        |  4 +-
 drivers/tty/serial/serial_txx9.c                   |  2 +
 drivers/tty/serial/sh-sci.c                        |  6 +-
 drivers/tty/serial/sifive.c                        |  8 ++-
 drivers/tty/serial/st-asc.c                        |  4 ++
 drivers/tty/serial/stm32-usart.c                   | 15 ++++-
 drivers/tty/synclink_gt.c                          |  2 +
 drivers/tty/sysrq.c                                | 13 ++--
 drivers/usb/core/hcd-pci.c                         |  4 +-
 drivers/usb/dwc2/gadget.c                          |  1 -
 drivers/usb/dwc3/drd.c                             |  9 +--
 drivers/usb/dwc3/dwc3-pci.c                        |  2 +-
 drivers/usb/dwc3/gadget.c                          | 20 ++++--
 drivers/usb/host/isp116x-hcd.c                     |  6 +-
 drivers/usb/host/oxu210hp-hcd.c                    |  2 +
 drivers/usb/musb/omap2430.c                        |  1 +
 drivers/usb/phy/phy-omap-otg.c                     |  4 +-
 drivers/usb/storage/karma.c                        | 15 ++---
 drivers/usb/typec/mux.c                            | 14 +++--
 drivers/usb/typec/tcpm/fusb302.c                   |  4 +-
 drivers/usb/usbip/stub_dev.c                       |  2 +-
 drivers/usb/usbip/stub_rx.c                        |  2 +
 drivers/vdpa/ifcvf/ifcvf_main.c                    |  3 +-
 drivers/vdpa/vdpa.c                                | 13 ++--
 drivers/vdpa/vdpa_user/vduse_dev.c                 |  7 +--
 drivers/vhost/vringh.c                             | 10 ++-
 drivers/video/fbdev/hyperv_fb.c                    | 19 +-----
 drivers/video/fbdev/pxa3xx-gcu.c                   | 12 ++--
 drivers/virtio/virtio_pci_modern_dev.c             |  1 +
 drivers/watchdog/rti_wdt.c                         |  2 +-
 drivers/watchdog/ts4800_wdt.c                      |  5 +-
 drivers/watchdog/wdat_wdt.c                        |  1 +
 drivers/xen/xlate_mmu.c                            |  1 -
 fs/afs/dir.c                                       |  5 +-
 fs/ceph/mds_client.c                               | 33 ++++++++--
 fs/ceph/xattr.c                                    | 10 ++-
 fs/cifs/cifsfs.c                                   |  2 +-
 fs/cifs/cifsfs.h                                   |  2 +-
 fs/cifs/cifsglob.h                                 |  4 +-
 fs/cifs/misc.c                                     | 27 ++++----
 fs/cifs/smb2ops.c                                  |  7 ++-
 fs/cifs/smb2pdu.c                                  |  3 +
 fs/f2fs/checkpoint.c                               |  4 +-
 fs/f2fs/file.c                                     |  1 +
 fs/fs-writeback.c                                  | 37 ++++++++---
 fs/inode.c                                         |  2 +-
 fs/jffs2/fs.c                                      |  1 +
 fs/kernfs/dir.c                                    | 31 ++++++----
 fs/ksmbd/smbacl.c                                  |  1 +
 fs/nfs/nfs4proc.c                                  |  4 ++
 fs/zonefs/super.c                                  | 11 ++--
 include/linux/export.h                             |  7 ++-
 include/linux/extcon.h                             |  2 +-
 include/linux/iio/common/st_sensors.h              |  3 +
 include/linux/jump_label.h                         |  4 +-
 include/linux/mlx5/mlx5_ifc.h                      |  5 +-
 include/linux/nodemask.h                           | 38 ++++++------
 include/linux/random.h                             |  2 +-
 include/net/flow_offload.h                         |  1 +
 include/net/netfilter/nf_tables.h                  |  1 -
 include/net/netfilter/nf_tables_offload.h          |  2 +-
 include/net/sch_generic.h                          | 42 +++++--------
 include/net/tcp.h                                  | 19 ++++--
 include/net/xdp_sock_drv.h                         |  5 +-
 include/net/xsk_buff_pool.h                        |  1 +
 include/trace/events/tcp.h                         |  2 +-
 kernel/bpf/core.c                                  | 14 ++---
 kernel/trace/trace.c                               | 13 +++-
 kernel/trace/trace_syscalls.c                      | 35 ++++-------
 lib/Makefile                                       |  2 +-
 lib/iov_iter.c                                     | 20 ++----
 lib/nodemask.c                                     |  4 +-
 net/core/filter.c                                  |  2 +-
 net/core/flow_offload.c                            |  6 ++
 net/ipv4/inet_hashtables.c                         | 10 +--
 net/ipv4/ip_gre.c                                  | 11 ++--
 net/ipv4/tcp.c                                     |  8 +--
 net/ipv4/tcp_bbr.c                                 | 20 +++---
 net/ipv4/tcp_bic.c                                 | 14 ++---
 net/ipv4/tcp_cdg.c                                 | 30 ++++-----
 net/ipv4/tcp_cong.c                                | 18 +++---
 net/ipv4/tcp_cubic.c                               | 22 +++----
 net/ipv4/tcp_dctcp.c                               | 11 ++--
 net/ipv4/tcp_highspeed.c                           | 18 +++---
 net/ipv4/tcp_htcp.c                                | 10 +--
 net/ipv4/tcp_hybla.c                               | 18 +++---
 net/ipv4/tcp_illinois.c                            | 12 ++--
 net/ipv4/tcp_input.c                               | 36 +++++------
 net/ipv4/tcp_ipv4.c                                |  2 +-
 net/ipv4/tcp_lp.c                                  |  6 +-
 net/ipv4/tcp_metrics.c                             | 12 ++--
 net/ipv4/tcp_nv.c                                  | 24 ++++----
 net/ipv4/tcp_output.c                              | 34 +++++-----
 net/ipv4/tcp_rate.c                                |  2 +-
 net/ipv4/tcp_scalable.c                            |  4 +-
 net/ipv4/tcp_vegas.c                               | 21 ++++---
 net/ipv4/tcp_veno.c                                | 24 ++++----
 net/ipv4/tcp_westwood.c                            |  3 +-
 net/ipv4/tcp_yeah.c                                | 30 ++++-----
 net/ipv4/xfrm4_protocol.c                          |  1 -
 net/ipv6/seg6_hmac.c                               |  1 -
 net/ipv6/tcp_ipv6.c                                |  2 +-
 net/key/af_key.c                                   | 10 +--
 net/netfilter/nf_tables_api.c                      | 54 +++++++---------
 net/netfilter/nf_tables_offload.c                  | 23 ++++++-
 net/netfilter/nft_nat.c                            |  3 +-
 net/openvswitch/actions.c                          |  6 ++
 net/openvswitch/conntrack.c                        |  4 +-
 net/sched/act_police.c                             | 16 ++++-
 net/smc/smc_cdc.c                                  |  2 +-
 net/sunrpc/xdr.c                                   |  6 +-
 net/sunrpc/xprtrdma/rpc_rdma.c                     |  5 ++
 net/sunrpc/xprtrdma/svc_rdma_rw.c                  |  4 +-
 net/tipc/bearer.c                                  |  3 +-
 net/unix/af_unix.c                                 |  2 +-
 net/xdp/xsk.c                                      | 16 ++---
 net/xdp/xsk_buff_pool.c                            |  7 +++
 net/xdp/xsk_queue.h                                | 14 +----
 scripts/gdb/linux/config.py                        |  6 +-
 scripts/mod/modpost.c                              |  5 +-
 security/keys/trusted-keys/trusted_tpm2.c          |  4 +-
 sound/pci/hda/patch_conexant.c                     |  7 +++
 sound/pci/hda/patch_realtek.c                      |  2 +
 sound/soc/fsl/fsl_sai.h                            |  4 +-
 sound/usb/pcm.c                                    |  5 +-
 sound/usb/quirks-table.h                           |  7 ++-
 tools/perf/builtin-c2c.c                           |  4 +-
 .../selftests/bpf/progs/test_stacktrace_build_id.c | 12 +---
 .../testing/selftests/net/forwarding/tc_police.sh  | 52 ++++++++++++++++
 tools/testing/selftests/netfilter/nft_nat.sh       | 43 +++++++++++++
 300 files changed, 1877 insertions(+), 1119 deletions(-)

[PATCH 5.15 001/247] pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 3928cf08334ed895a31458cbebd8d4ec6d84c080 ]

When the MIPS_ALCHEMY board selection is MIPS_XXS1500 instead of
MIPS_DB1XXX, the PCMCIA driver 'db1xxx_ss' has build errors due
to missing DB1XXX symbols. The PCMCIA driver should be restricted
to MIPS_DB1XXX instead of MIPS_ALCHEMY to fix this build error.

ERROR: modpost: "bcsr_read" [drivers/pcmcia/db1xxx_ss.ko] undefined!
ERROR: modpost: "bcsr_mod" [drivers/pcmcia/db1xxx_ss.ko] undefined!

Fixes: 42a4f17dc356 ("MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pcmcia/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index d13b8d1a780a..4868ec03e32f 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -151,7 +151,7 @@ config TCIC
 
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
-	depends on MIPS_ALCHEMY && PCMCIA
+	depends on MIPS_DB1XXX && PCMCIA
 	help
 	  Enable this driver of you want PCMCIA support on your Alchemy
 	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
-- 
2.35.1

[PATCH 5.15 002/247] staging: greybus: codecs: fix type confusion of list iterator variable

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

[ Upstream commit 84ef256550196bc06e6849a34224c998b45bd557 ]

If the list does not exit early then data == NULL and 'module' does not
point to a valid list element.
Using 'module' in such a case is not valid and was therefore removed.

Fixes: 6dd67645f22c ("greybus: audio: Use single codec driver registration")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220321123626.3068639-1-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/audio_codec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/greybus/audio_codec.c b/drivers/staging/greybus/audio_codec.c
index b589cf6b1d03..e19b91e7a72e 100644
--- a/drivers/staging/greybus/audio_codec.c
+++ b/drivers/staging/greybus/audio_codec.c
@@ -599,8 +599,8 @@ static int gbcodec_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 			break;
 	}
 	if (!data) {
-		dev_err(dai->dev, "%s:%s DATA connection missing\n",
-			dai->name, module->name);
+		dev_err(dai->dev, "%s DATA connection missing\n",
+			dai->name);
 		mutex_unlock(&codec->lock);
 		return -ENODEV;
 	}
-- 
2.35.1

[PATCH 5.15 003/247] iio: adc: ad7124: Remove shift from scan_type

[Greg Kroah-Hartman]

From: Alexandru Tachici <alexandru.tachici@analog.com>

[ Upstream commit fe78ccf79b0e29fd6d8dc2e2c3b0dbeda4ce3ad8 ]

The 24 bits data is stored in 32 bits in BE. There
is no need to shift it. This confuses user-space apps.

Fixes: b3af341bbd966 ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad7124.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 18c154afbd7a..101f2da2811b 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -188,7 +188,6 @@ static const struct iio_chan_spec ad7124_channel_template = {
 		.sign = 'u',
 		.realbits = 24,
 		.storagebits = 32,
-		.shift = 8,
 		.endianness = IIO_BE,
 	},
 };
-- 
2.35.1

[PATCH 5.15 004/247] lkdtm/bugs: Check for the NULL pointer after calling kmalloc

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 4a9800c81d2f34afb66b4b42e0330ae8298019a2 ]

As the possible failure of the kmalloc(), the not_checked and checked
could be NULL pointer.
Therefore, it should be better to check it in order to avoid the
dereference of the NULL pointer.
Also, we need to kfree the 'not_checked' and 'checked' to avoid
the memory leak if fails.
And since it is just a test, it may directly return without error
number.

Fixes: ae2e1aad3e48 ("drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220120092936.1874264-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/lkdtm/bugs.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index 4282b625200f..072e3b742edf 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -248,6 +248,11 @@ void lkdtm_ARRAY_BOUNDS(void)
 
 	not_checked = kmalloc(sizeof(*not_checked) * 2, GFP_KERNEL);
 	checked = kmalloc(sizeof(*checked) * 2, GFP_KERNEL);
+	if (!not_checked || !checked) {
+		kfree(not_checked);
+		kfree(checked);
+		return;
+	}
 
 	pr_info("Array access within bounds ...\n");
 	/* For both, touch all bytes in the actual member size. */
-- 
2.35.1

[PATCH 5.15 005/247] lkdtm/bugs: Dont expect thread termination without CONFIG_UBSAN_TRAP

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 8bfdbddd68249e0d8598777cca8249619ee51df0 ]

When you don't select CONFIG_UBSAN_TRAP, you get:

  # echo ARRAY_BOUNDS > /sys/kernel/debug/provoke-crash/DIRECT
[  102.265827] ================================================================================
[  102.278433] UBSAN: array-index-out-of-bounds in drivers/misc/lkdtm/bugs.c:342:16
[  102.287207] index 8 is out of range for type 'char [8]'
[  102.298722] ================================================================================
[  102.313712] lkdtm: FAIL: survived array bounds overflow!
[  102.318770] lkdtm: Unexpected! This kernel (5.16.0-rc1-s3k-dev-01884-g720dcf79314a ppc) was built with CONFIG_UBSAN_BOUNDS=y

It is not correct because when CONFIG_UBSAN_TRAP is not selected
you can't expect array bounds overflow to kill the thread.

Modify the logic so that when the kernel is built with
CONFIG_UBSAN_BOUNDS but without CONFIG_UBSAN_TRAP, you get a warning
about CONFIG_UBSAN_TRAP not been selected instead.

This also require a fix of pr_expected_config(), otherwise the
following error is encountered.

  CC      drivers/misc/lkdtm/bugs.o
drivers/misc/lkdtm/bugs.c: In function 'lkdtm_ARRAY_BOUNDS':
drivers/misc/lkdtm/bugs.c:351:2: error: 'else' without a previous 'if'
  351 |  else
      |  ^~~~

Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/363b58690e907c677252467a94fe49444c80ea76.1649704381.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/lkdtm/bugs.c  | 5 ++++-
 drivers/misc/lkdtm/lkdtm.h | 8 ++++----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index 072e3b742edf..fac4a811b97b 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -272,7 +272,10 @@ void lkdtm_ARRAY_BOUNDS(void)
 	kfree(not_checked);
 	kfree(checked);
 	pr_err("FAIL: survived array bounds overflow!\n");
-	pr_expected_config(CONFIG_UBSAN_BOUNDS);
+	if (IS_ENABLED(CONFIG_UBSAN_BOUNDS))
+		pr_expected_config(CONFIG_UBSAN_TRAP);
+	else
+		pr_expected_config(CONFIG_UBSAN_BOUNDS);
 }
 
 void lkdtm_CORRUPT_LIST_ADD(void)
diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
index c212a253edde..ef9a24aabfc3 100644
--- a/drivers/misc/lkdtm/lkdtm.h
+++ b/drivers/misc/lkdtm/lkdtm.h
@@ -9,19 +9,19 @@
 extern char *lkdtm_kernel_info;
 
 #define pr_expected_config(kconfig)				\
-{								\
+do {								\
 	if (IS_ENABLED(kconfig)) 				\
 		pr_err("Unexpected! This %s was built with " #kconfig "=y\n", \
 			lkdtm_kernel_info);			\
 	else							\
 		pr_warn("This is probably expected, since this %s was built *without* " #kconfig "=y\n", \
 			lkdtm_kernel_info);			\
-}
+} while (0)
 
 #ifndef MODULE
 int lkdtm_check_bool_cmdline(const char *param);
 #define pr_expected_config_param(kconfig, param)		\
-{								\
+do {								\
 	if (IS_ENABLED(kconfig)) {				\
 		switch (lkdtm_check_bool_cmdline(param)) {	\
 		case 0:						\
@@ -52,7 +52,7 @@ int lkdtm_check_bool_cmdline(const char *param);
 			break;					\
 		}						\
 	}							\
-}
+} while (0)
 #else
 #define pr_expected_config_param(kconfig, param) pr_expected_config(kconfig)
 #endif
-- 
2.35.1

[PATCH 5.15 006/247] tty: goldfish: Use tty_port_destroy() to destroy port

[Greg Kroah-Hartman]

From: Wang Weiyang <wangweiyang2@huawei.com>

[ Upstream commit 507b05063d1b7a1fcb9f7d7c47586fc4f3508f98 ]

In goldfish_tty_probe(), the port initialized through tty_port_init()
should be destroyed in error paths.In goldfish_tty_remove(), qtty->port
also should be destroyed or else might leak resources.

Fix the above by calling tty_port_destroy().

Fixes: 666b7793d4bf ("goldfish: tty driver")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Link: https://lore.kernel.org/r/20220328115844.86032-1-wangweiyang2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/goldfish.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 876ff5445c52..0dc9a6a36ce0 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -407,6 +407,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 err_tty_register_device_failed:
 	free_irq(irq, qtty);
 err_dec_line_count:
+	tty_port_destroy(&qtty->port);
 	goldfish_tty_current_line_count--;
 	if (goldfish_tty_current_line_count == 0)
 		goldfish_tty_delete_driver();
@@ -428,6 +429,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
 	iounmap(qtty->base);
 	qtty->base = NULL;
 	free_irq(qtty->irq, pdev);
+	tty_port_destroy(&qtty->port);
 	goldfish_tty_current_line_count--;
 	if (goldfish_tty_current_line_count == 0)
 		goldfish_tty_delete_driver();
-- 
2.35.1

[PATCH 5.15 007/247] tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit bcea0f547ec1a2ee44d429aaf0334633e386e67c ]

Fix the missing clk_disable_unprepare() before return
from owl_uart_probe() in the error handling case.

Fixes: abf42d2f333b ("tty: serial: owl: add "much needed" clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307105135.11698-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/owl-uart.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 91f1eb0058d7..9a6611cfc18e 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -731,6 +731,7 @@ static int owl_uart_probe(struct platform_device *pdev)
 	owl_port->port.uartclk = clk_get_rate(owl_port->clk);
 	if (owl_port->port.uartclk == 0) {
 		dev_err(&pdev->dev, "clock rate is zero\n");
+		clk_disable_unprepare(owl_port->clk);
 		return -EINVAL;
 	}
 	owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
-- 
2.35.1

[PATCH 5.15 008/247] tty: n_tty: Restore EOF push handling behavior

[Greg Kroah-Hartman]

From: Daniel Gibson <daniel@gibson.sh>

[ Upstream commit 65a8b287023da68c4550deab5c764e6891cf1caf ]

TTYs in ICANON mode have a special case that allows "pushing" a line
without a regular EOL character (like newline), by using EOF (the EOT
character - ASCII 0x4) as a pseudo-EOL. It is silently discarded, so
the reader of the PTS will receive the line *without* EOF or any other
terminating character.

This special case has an edge case: What happens if the readers buffer
is the same size as the line (without EOF)? Will they be able to tell
if the whole line is received, i.e. if the next read() will return more
of the same line or the next line?

There are two possibilities,  that both have (dis)advantages:

1. The next read() returns 0. FreeBSD (13.0) and OSX (10.11) do this.
   Advantage: The reader can interpret this as "the line is over".
   Disadvantage: read() returning 0 means EOF, the reader could also
   interpret it as "there's no more data" and stop reading or even
   close the PT.

2. The next read() returns the next line, the EOF is silently discarded.
   Solaris (or at least OpenIndiana 2021.10) does this, Linux has done
   do this since commit 40d5e0905a03 ("n_tty: Fix EOF push handling");
   this behavior was recently broken by commit 359303076163 ("tty:
   n_tty: do not look ahead for EOL character past the end of the buffer").
   Advantage: read() won't return 0 (EOF), reader less likely to be
   confused (and things like `while(read(..)>0)` don't break)
   Disadvantage: The reader can't really know if the read() continues
   the last line (that filled the whole read buffer) or starts a
   new line.

As both options are defensible (and are used by other Unix-likes), it's
best to stick to the "old" behavior since "n_tty: Fix EOF push handling"
of 2013, i.e. silently discard that EOF.

This patch - that I actually got from Linus for testing and only
modified slightly - restores that behavior by skipping an EOF
character if it's the next character after reading is done.

Based on a patch from Linus Torvalds.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611
Fixes: 359303076163 ("tty: n_tty: do not look ahead for EOL character past the end of the buffer")
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Reviewed-and-tested-by: Daniel Gibson <daniel@gibson.sh>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Link: https://lore.kernel.org/r/20220329235810.452513-2-daniel@gibson.sh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_tty.c | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index de5b45de5040..891036bd9f89 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2012,6 +2012,35 @@ static bool canon_copy_from_read_buf(struct tty_struct *tty,
 	return ldata->read_tail != canon_head;
 }
 
+/*
+ * If we finished a read at the exact location of an
+ * EOF (special EOL character that's a __DISABLED_CHAR)
+ * in the stream, silently eat the EOF.
+ */
+static void canon_skip_eof(struct tty_struct *tty)
+{
+	struct n_tty_data *ldata = tty->disc_data;
+	size_t tail, canon_head;
+
+	canon_head = smp_load_acquire(&ldata->canon_head);
+	tail = ldata->read_tail;
+
+	// No data?
+	if (tail == canon_head)
+		return;
+
+	// See if the tail position is EOF in the circular buffer
+	tail &= (N_TTY_BUF_SIZE - 1);
+	if (!test_bit(tail, ldata->read_flags))
+		return;
+	if (read_buf(ldata, tail) != __DISABLED_CHAR)
+		return;
+
+	// Clear the EOL bit, skip the EOF char.
+	clear_bit(tail, ldata->read_flags);
+	smp_store_release(&ldata->read_tail, ldata->read_tail + 1);
+}
+
 /**
  *	job_control		-	check job control
  *	@tty: tty
@@ -2081,7 +2110,14 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	 */
 	if (*cookie) {
 		if (ldata->icanon && !L_EXTPROC(tty)) {
-			if (canon_copy_from_read_buf(tty, &kb, &nr))
+			/*
+			 * If we have filled the user buffer, see
+			 * if we should skip an EOF character before
+			 * releasing the lock and returning done.
+			 */
+			if (!nr)
+				canon_skip_eof(tty);
+			else if (canon_copy_from_read_buf(tty, &kb, &nr))
 				return kb - kbuf;
 		} else {
 			if (copy_from_read_buf(tty, &kb, &nr))
-- 
2.35.1

[PATCH 5.15 009/247] serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 0e0fd55719fa081de6f9e5d9e6cef48efb04d34a ]

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference.

Fixes: 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404143842.16960-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index c2cecc6f47db..179bb1375636 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -429,6 +429,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 
 	memset(&port, 0, sizeof(port));
 	port.port.private_data = vuart;
-- 
2.35.1

[PATCH 5.15 010/247] tty: serial: fsl_lpuart: fix potential bug when using both of_alias_get_id and ida_simple_get

[Greg Kroah-Hartman]

From: Sherry Sun <sherry.sun@nxp.com>

[ Upstream commit f398e0aa325c61fa20903833a5b534ecb8e6e418 ]

Now fsl_lpuart driver use both of_alias_get_id() and ida_simple_get() in
.probe(), which has the potential bug. For example, when remove the
lpuart7 alias in dts, of_alias_get_id() will return error, then call
ida_simple_get() to allocate the id 0 for lpuart7, this may confilct
with the lpuart4 which has alias 0.

    aliases {
	...
        serial0 = &lpuart4;
        serial1 = &lpuart5;
        serial2 = &lpuart6;
        serial3 = &lpuart7;
    }

So remove the ida_simple_get() in .probe(), return an error directly
when calling of_alias_get_id() fails, which is consistent with other
uart drivers behavior.

Fixes: 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220321112211.8895-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/fsl_lpuart.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 33e5eba6ff04..481107fdd69b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -239,8 +239,6 @@
 /* IMX lpuart has four extra unused regs located at the beginning */
 #define IMX_REG_OFF	0x10
 
-static DEFINE_IDA(fsl_lpuart_ida);
-
 enum lpuart_type {
 	VF610_LPUART,
 	LS1021A_LPUART,
@@ -275,7 +273,6 @@ struct lpuart_port {
 	int			rx_dma_rng_buf_len;
 	unsigned int		dma_tx_nents;
 	wait_queue_head_t	dma_wait;
-	bool			id_allocated;
 };
 
 struct lpuart_soc_data {
@@ -2703,23 +2700,18 @@ static int lpuart_probe(struct platform_device *pdev)
 
 	ret = of_alias_get_id(np, "serial");
 	if (ret < 0) {
-		ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "port line is full, add device failed\n");
-			return ret;
-		}
-		sport->id_allocated = true;
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
 	}
 	if (ret >= ARRAY_SIZE(lpuart_ports)) {
 		dev_err(&pdev->dev, "serial%d out of range\n", ret);
-		ret = -EINVAL;
-		goto failed_out_of_range;
+		return -EINVAL;
 	}
 	sport->port.line = ret;
 
 	ret = lpuart_enable_clks(sport);
 	if (ret)
-		goto failed_clock_enable;
+		return ret;
 	sport->port.uartclk = lpuart_get_baud_clk_rate(sport);
 
 	lpuart_ports[sport->port.line] = sport;
@@ -2767,10 +2759,6 @@ static int lpuart_probe(struct platform_device *pdev)
 	uart_remove_one_port(&lpuart_reg, &sport->port);
 failed_attach_port:
 	lpuart_disable_clks(sport);
-failed_clock_enable:
-failed_out_of_range:
-	if (sport->id_allocated)
-		ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
 	return ret;
 }
 
@@ -2780,9 +2768,6 @@ static int lpuart_remove(struct platform_device *pdev)
 
 	uart_remove_one_port(&lpuart_reg, &sport->port);
 
-	if (sport->id_allocated)
-		ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
-
 	lpuart_disable_clks(sport);
 
 	if (sport->dma_tx_chan)
@@ -2912,7 +2897,6 @@ static int __init lpuart_serial_init(void)
 
 static void __exit lpuart_serial_exit(void)
 {
-	ida_destroy(&fsl_lpuart_ida);
 	platform_driver_unregister(&lpuart_driver);
 	uart_unregister_driver(&lpuart_reg);
 }
-- 
2.35.1

[PATCH 5.15 011/247] remoteproc: imx_rproc: Ignore create mem entry for resource table

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 58b7c856519fe946620ee68dd0c37bd3c695484a ]

Resource table is used by Linux to get information published by
remote processor. It should be not be used for memory allocation, so
not create rproc mem entry.

Fixes: b29b4249f8f0 ("remoteproc: imx_rproc: add i.MX specific parse fw hook")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220415025737.1561976-1-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/imx_rproc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 05c39e1c56b4..59eae605ad59 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -447,6 +447,9 @@ static int imx_rproc_prepare(struct rproc *rproc)
 		if (!strcmp(it.node->name, "vdev0buffer"))
 			continue;
 
+		if (!strcmp(it.node->name, "rsc-table"))
+			continue;
+
 		rmem = of_reserved_mem_lookup(it.node);
 		if (!rmem) {
 			dev_err(priv->dev, "unable to acquire memory-region\n");
-- 
2.35.1

[PATCH 5.15 012/247] usb: usbip: fix a refcount leak in stub_probe()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 9ec4cbf1cc55d126759051acfe328d489c5d6e60 ]

usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.

Fix this by moving usb_put_dev() to sdev_free error path handling.

Find this by code review.

Fixes: 3ff67445750a ("usbip: fix error handling in stub_probe()")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/usbip/stub_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
index d8d3892e5a69..3c6d452e3bf4 100644
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -393,7 +393,6 @@ static int stub_probe(struct usb_device *udev)
 
 err_port:
 	dev_set_drvdata(&udev->dev, NULL);
-	usb_put_dev(udev);
 
 	/* we already have busid_priv, just lock busid_lock */
 	spin_lock(&busid_priv->busid_lock);
@@ -408,6 +407,7 @@ static int stub_probe(struct usb_device *udev)
 	put_busid_priv(busid_priv);
 
 sdev_free:
+	usb_put_dev(udev);
 	stub_device_free(sdev);
 
 	return rc;
-- 
2.35.1

[PATCH 5.15 013/247] usb: usbip: add missing device lock on tweak configuration cmd

[Greg Kroah-Hartman]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit d088fabace2ca337b275d1d4b36db4fe7771e44f ]

The function documentation of usb_set_configuration says that its
callers should hold the device lock. This lock is held for all
callsites except tweak_set_configuration_cmd. The code path can be
executed for example when attaching a remote USB device.
The solution is to surround the call by the device lock.

This bug was found using my experimental own-developed static analysis
tool, which reported the missing lock on v5.17.2. I manually verified
this bug report by doing code review as well. I runtime checked that
the required lock is not held. I compiled and runtime tested this on
x86_64 with a USB mouse. After applying this patch, my analyser no
longer reports this potential bug.

Fixes: 2c8c98158946 ("staging: usbip: let client choose device configuration")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/usbip/stub_rx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 325c22008e53..5dd41e8215e0 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -138,7 +138,9 @@ static int tweak_set_configuration_cmd(struct urb *urb)
 	req = (struct usb_ctrlrequest *) urb->setup_packet;
 	config = le16_to_cpu(req->wValue);
 
+	usb_lock_device(sdev->udev);
 	err = usb_set_configuration(sdev->udev, config);
+	usb_unlock_device(sdev->udev);
 	if (err && err != -ENODEV)
 		dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
 			config, err);
-- 
2.35.1

[PATCH 5.15 014/247] USB: storage: karma: fix rio_karma_init return

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit b92ffb1eddd9a66a90defc556dcbf65a43c196c7 ]

The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.

Similarly, it should return -EIO when rio_karma_send_command() fails.

Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/storage/karma.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index 05cec81dcd3f..38ddfedef629 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -174,24 +174,25 @@ static void rio_karma_destructor(void *extra)
 
 static int rio_karma_init(struct us_data *us)
 {
-	int ret = 0;
 	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
 
 	if (!data)
-		goto out;
+		return -ENOMEM;
 
 	data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
 	if (!data->recv) {
 		kfree(data);
-		goto out;
+		return -ENOMEM;
 	}
 
 	us->extra = data;
 	us->extra_destructor = rio_karma_destructor;
-	ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
-	data->in_storage = (ret == 0);
-out:
-	return ret;
+	if (rio_karma_send_command(RIO_ENTER_STORAGE, us))
+		return -EIO;
+
+	data->in_storage = 1;
+
+	return 0;
 }
 
 static struct scsi_host_template karma_host_template;
-- 
2.35.1

[PATCH 5.15 015/247] usb: musb: Fix missing of_node_put() in omap2430_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 424bef51fa530389b0b9008c9e144e40c10e8458 ]

The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 8934d3e4d0e7 ("usb: musb: omap2430: Don't use omap_get_control_dev()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220309111033.24487-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/musb/omap2430.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index f086960fe2b5..bd1de5c4c434 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -363,6 +363,7 @@ static int omap2430_probe(struct platform_device *pdev)
 	control_node = of_parse_phandle(np, "ctrl-module", 0);
 	if (control_node) {
 		control_pdev = of_find_device_by_node(control_node);
+		of_node_put(control_node);
 		if (!control_pdev) {
 			dev_err(&pdev->dev, "Failed to get control device\n");
 			ret = -EINVAL;
-- 
2.35.1

[PATCH 5.15 016/247] staging: fieldbus: Fix the error handling path in anybuss_host_common_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 7079b3483a17be2cfba64cbd4feb1b7ae07f1ea7 ]

If device_register() fails, device_unregister() should not be called
because it will free some resources that are not allocated.
put_device() should be used instead.

Fixes: 308ee87a2f1e ("staging: fieldbus: anybus-s: support HMS Anybus-S bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5401a519608d6e1a4e7435c20f4f20b0c5c36c23.1650610082.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fieldbus/anybuss/host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/fieldbus/anybuss/host.c b/drivers/staging/fieldbus/anybuss/host.c
index 8a75f6642c78..0c41d1e0204f 100644
--- a/drivers/staging/fieldbus/anybuss/host.c
+++ b/drivers/staging/fieldbus/anybuss/host.c
@@ -1384,7 +1384,7 @@ anybuss_host_common_probe(struct device *dev,
 		goto err_device;
 	return cd;
 err_device:
-	device_unregister(&cd->client->dev);
+	put_device(&cd->client->dev);
 err_kthread:
 	kthread_stop(cd->qthread);
 err_reset:
-- 
2.35.1

[PATCH 5.15 017/247] pwm: lp3943: Fix duty calculation in case period was clamped

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 5e3b07ca5cc78cd4a987e78446849e41288d87cb ]

The hardware only supports periods <= 1.6 ms and if a bigger period is
requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger
than 1.6 ms and then the duty cycle register is written with a value
bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly.

Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-lp3943.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
index ea17d446a627..2bd04ecb508c 100644
--- a/drivers/pwm/pwm-lp3943.c
+++ b/drivers/pwm/pwm-lp3943.c
@@ -125,6 +125,7 @@ static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (err)
 		return err;
 
+	duty_ns = min(duty_ns, period_ns);
 	val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
 
 	return lp3943_write_byte(lp3943, reg_duty, val);
-- 
2.35.1

[PATCH 5.15 018/247] pwm: raspberrypi-poe: Fix endianness in firmware struct

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 09f688f0718f57f9cf68ee1aa94490f641e759ba ]

The reg member of struct raspberrypi_pwm_prop is a little endian 32 bit
quantity. Explicitly convert the (native endian) value to little endian
on assignment as is already done in raspberrypi_pwm_set_property().

This fixes the following sparse warning:

	drivers/pwm/pwm-raspberrypi-poe.c:69:24: warning: incorrect type in initializer (different base types)
	drivers/pwm/pwm-raspberrypi-poe.c:69:24:    expected restricted __le32 [usertype] reg
	drivers/pwm/pwm-raspberrypi-poe.c:69:24:    got unsigned int [usertype] reg

Fixes: 79caa362eab6 ("pwm: Add Raspberry Pi Firmware based PWM bus")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-raspberrypi-poe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-raspberrypi-poe.c b/drivers/pwm/pwm-raspberrypi-poe.c
index 579a15240e0a..c877de37734d 100644
--- a/drivers/pwm/pwm-raspberrypi-poe.c
+++ b/drivers/pwm/pwm-raspberrypi-poe.c
@@ -66,7 +66,7 @@ static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware,
 					u32 reg, u32 *val)
 {
 	struct raspberrypi_pwm_prop msg = {
-		.reg = reg
+		.reg = cpu_to_le32(reg),
 	};
 	int ret;
 
-- 
2.35.1

[PATCH 5.15 019/247] rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 1a358d35066487d228a68303d808bc4721c6b1b9 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422105326.78713-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/qcom_smd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 8da1b5cb31b3..775a7e44ac68 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1404,7 +1404,7 @@ static int qcom_smd_parse_edge(struct device *dev,
 		edge->name = node->name;
 
 	irq = irq_of_parse_and_map(node, 0);
-	if (irq < 0) {
+	if (!irq) {
 		dev_err(dev, "required smd interrupt missing\n");
 		ret = irq;
 		goto put_node;
-- 
2.35.1

[PATCH 5.15 020/247] usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback

[Greg Kroah-Hartman]

From: Wesley Cheng <quic_wcheng@quicinc.com>

[ Upstream commit bf594d1d0c1d7b895954018043536ffd327844f9 ]

The list_for_each_entry_safe() macro saves the current item (n) and
the item after (n+1), so that n can be safely removed without
corrupting the list.  However, when traversing the list and removing
items using gadget giveback, the DWC3 lock is briefly released,
allowing other routines to execute.  There is a situation where, while
items are being removed from the cancelled_list using
dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable
routine is running in parallel (due to UDC unbind).  As the cleanup
routine removes n, and the pullup disable removes n+1, once the
cleanup retakes the DWC3 lock, it references a request who was already
removed/handled.  With list debug enabled, this leads to a panic.
Ensure all instances of the macro are replaced where gadget giveback
is used.

Example call stack:

Thread#1:
__dwc3_gadget_ep_set_halt() - CLEAR HALT
  -> dwc3_gadget_ep_cleanup_cancelled_requests()
    ->list_for_each_entry_safe()
    ->dwc3_gadget_giveback(n)
      ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list]
      ->spin_unlock
      ->Thread#2 executes
      ...
    ->dwc3_gadget_giveback(n+1)
      ->Already removed!

Thread#2:
dwc3_gadget_pullup()
  ->waiting for dwc3 spin_lock
  ...
  ->Thread#1 released lock
  ->dwc3_stop_active_transfers()
    ->dwc3_remove_requests()
      ->fetches n+1 item from cancelled_list (n removed by Thread#1)
      ->dwc3_gadget_giveback()
        ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list]
        ->spin_unlock

Fixes: d4f1afe5e896 ("usb: dwc3: gadget: move requests to cancelled_list")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220414183521.23451-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c064ec41bf8c..99d0372ed840 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1955,10 +1955,10 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r
 static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
 {
 	struct dwc3_request		*req;
-	struct dwc3_request		*tmp;
 	struct dwc3			*dwc = dep->dwc;
 
-	list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) {
+	while (!list_empty(&dep->cancelled_list)) {
+		req = next_request(&dep->cancelled_list);
 		dwc3_gadget_ep_skip_trbs(dep, req);
 		switch (req->status) {
 		case DWC3_REQUEST_STATUS_DISCONNECTED:
@@ -1975,6 +1975,12 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
 			dwc3_gadget_giveback(dep, req, -ECONNRESET);
 			break;
 		}
+		/*
+		 * The endpoint is disabled, let the dwc3_remove_requests()
+		 * handle the cleanup.
+		 */
+		if (!dep->endpoint.desc)
+			break;
 	}
 }
 
@@ -3258,15 +3264,21 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep,
 		const struct dwc3_event_depevt *event, int status)
 {
 	struct dwc3_request	*req;
-	struct dwc3_request	*tmp;
 
-	list_for_each_entry_safe(req, tmp, &dep->started_list, list) {
+	while (!list_empty(&dep->started_list)) {
 		int ret;
 
+		req = next_request(&dep->started_list);
 		ret = dwc3_gadget_ep_cleanup_completed_request(dep, event,
 				req, status);
 		if (ret)
 			break;
+		/*
+		 * The endpoint is disabled, let the dwc3_remove_requests()
+		 * handle the cleanup.
+		 */
+		if (!dep->endpoint.desc)
+			break;
 	}
 }
 
-- 
2.35.1

[PATCH 5.15 021/247] usb: dwc3: pci: Fix pm_runtime_get_sync() error checking

[Greg Kroah-Hartman]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit a03e2ddab8e735e2cc315609b297b300e9cc60d2 ]

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: 8eed00b237a28 ("usb: dwc3: pci: Runtime resume child device from wq")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220422062652.10575-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f08b2178fd32..9c8887615701 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -256,7 +256,7 @@ static void dwc3_pci_resume_work(struct work_struct *work)
 	int ret;
 
 	ret = pm_runtime_get_sync(&dwc3->dev);
-	if (ret) {
+	if (ret < 0) {
 		pm_runtime_put_sync_autosuspend(&dwc3->dev);
 		return;
 	}
-- 
2.35.1

[PATCH 5.15 022/247] misc: fastrpc: fix an incorrect NULL check on list iterator

[Greg Kroah-Hartman]

From: Xiaomeng Tong <xiam0nd.tong@gmail.com>

[ Upstream commit 5ac11fe03a0a83042d1a040dbce4fa2fb5521e23 ]

The bug is here:
	if (!buf) {

The list iterator value 'buf' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty (in this case, the
check 'if (!buf) {' will always be false and never exit expectly).

To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'buf' as a dedicated pointer to
point to the found element.

Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327062202.5720-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/fastrpc.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 86d8fb8c0148..c7134d2cf69a 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1351,17 +1351,18 @@ static int fastrpc_req_munmap_impl(struct fastrpc_user *fl,
 				   struct fastrpc_req_munmap *req)
 {
 	struct fastrpc_invoke_args args[1] = { [0] = { 0 } };
-	struct fastrpc_buf *buf, *b;
+	struct fastrpc_buf *buf = NULL, *iter, *b;
 	struct fastrpc_munmap_req_msg req_msg;
 	struct device *dev = fl->sctx->dev;
 	int err;
 	u32 sc;
 
 	spin_lock(&fl->lock);
-	list_for_each_entry_safe(buf, b, &fl->mmaps, node) {
-		if ((buf->raddr == req->vaddrout) && (buf->size == req->size))
+	list_for_each_entry_safe(iter, b, &fl->mmaps, node) {
+		if ((iter->raddr == req->vaddrout) && (iter->size == req->size)) {
+			buf = iter;
 			break;
-		buf = NULL;
+		}
 	}
 	spin_unlock(&fl->lock);
 
-- 
2.35.1

[PATCH 5.15 023/247] firmware: stratix10-svc: fix a missing check on list iterator

[Greg Kroah-Hartman]

From: Xiaomeng Tong <xiam0nd.tong@gmail.com>

[ Upstream commit 5a0793ac66ac0e254d292f129a4d6c526f9f2aff ]

The bug is here:
	pmem->vaddr = NULL;

The list iterator 'pmem' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.

To fix this bug, just gen_pool_free/set NULL/list_del() and return
when found, otherwise list_del HEAD and return;

Fixes: 7ca5ce896524f ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220414035609.2239-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/stratix10-svc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 53c7e3f8cfde..7dd0ac1a0cfc 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -941,17 +941,17 @@ EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
 void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
 {
 	struct stratix10_svc_data_mem *pmem;
-	size_t size = 0;
 
 	list_for_each_entry(pmem, &svc_data_mem, node)
 		if (pmem->vaddr == kaddr) {
-			size = pmem->size;
-			break;
+			gen_pool_free(chan->ctrl->genpool,
+				       (unsigned long)kaddr, pmem->size);
+			pmem->vaddr = NULL;
+			list_del(&pmem->node);
+			return;
 		}
 
-	gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
-	pmem->vaddr = NULL;
-	list_del(&pmem->node);
+	list_del(&svc_data_mem);
 }
 EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
 
-- 
2.35.1

[PATCH 5.15 024/247] usb: typec: mux: Check dev_set_name() return value

[Greg Kroah-Hartman]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit b9fa0292490db39d6542f514117333d366ec0011 ]

It's possible that dev_set_name() returns -ENOMEM, catch and handle this.

Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-4-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/mux.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index c8340de0ed49..d2aaf294b649 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -131,8 +131,11 @@ typec_switch_register(struct device *parent,
 	sw->dev.class = &typec_mux_class;
 	sw->dev.type = &typec_switch_dev_type;
 	sw->dev.driver_data = desc->drvdata;
-	dev_set_name(&sw->dev, "%s-switch",
-		     desc->name ? desc->name : dev_name(parent));
+	ret = dev_set_name(&sw->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&sw->dev);
+		return ERR_PTR(ret);
+	}
 
 	ret = device_add(&sw->dev);
 	if (ret) {
@@ -338,8 +341,11 @@ typec_mux_register(struct device *parent, const struct typec_mux_desc *desc)
 	mux->dev.class = &typec_mux_class;
 	mux->dev.type = &typec_mux_dev_type;
 	mux->dev.driver_data = desc->drvdata;
-	dev_set_name(&mux->dev, "%s-mux",
-		     desc->name ? desc->name : dev_name(parent));
+	ret = dev_set_name(&mux->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&mux->dev);
+		return ERR_PTR(ret);
+	}
 
 	ret = device_add(&mux->dev);
 	if (ret) {
-- 
2.35.1

[PATCH 5.15 025/247] rpmsg: virtio: Fix possible double free in rpmsg_probe()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit c2eecefec5df1306eafce28ccdf1ca159a552ecc ]

vch will be free in virtio_rpmsg_release_device() when
rpmsg_ns_register_device() fails. There is no need to call kfree() again.

Fix this by changing error path from free_vch to free_ctrldev.

Fixes: c486682ae1e2 ("rpmsg: virtio: Register the rpmsg_char device")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220426060536.15594-2-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 8e49a3bacfc7..834a0811e371 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -964,7 +964,8 @@ static int rpmsg_probe(struct virtio_device *vdev)
 
 		err = rpmsg_ns_register_device(rpdev_ns);
 		if (err)
-			goto free_vch;
+			/* vch will be free in virtio_rpmsg_release_device() */
+			goto free_ctrldev;
 	}
 
 	/*
@@ -988,8 +989,6 @@ static int rpmsg_probe(struct virtio_device *vdev)
 
 	return 0;
 
-free_vch:
-	kfree(vch);
 free_ctrldev:
 	rpmsg_virtio_del_ctrl_dev(rpdev_ctrl);
 free_coherent:
-- 
2.35.1

[PATCH 5.15 026/247] rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 1680939e9ecf7764fba8689cfb3429c2fe2bb23c ]

vch will be free in virtio_rpmsg_release_device() when
rpmsg_ctrldev_register_device() fails. There is no need to call
kfree() again.

Fixes: c486682ae1e2 ("rpmsg: virtio: Register the rpmsg_char device")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220426060536.15594-3-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 834a0811e371..3a62e6197151 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -842,7 +842,7 @@ static struct rpmsg_device *rpmsg_virtio_add_ctrl_dev(struct virtio_device *vdev
 
 	err = rpmsg_chrdev_register_device(rpdev_ctrl);
 	if (err) {
-		kfree(vch);
+		/* vch will be free in virtio_rpmsg_release_device() */
 		return ERR_PTR(err);
 	}
 
-- 
2.35.1

[PATCH 5.15 027/247] rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl

[Greg Kroah-Hartman]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

[ Upstream commit df191796985922488e4e6b64f7bd79c3934412f2 ]

Unregister the rpmsg_ctrl device instead of just freeing the
the virtio_rpmsg_channel structure.
This will properly unregister the device and call
virtio_rpmsg_release_device() that frees the structure.

Fixes: c486682ae1e2 ("rpmsg: virtio: Register the rpmsg_char device")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220426060536.15594-4-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 3a62e6197151..b03e7404212f 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -853,7 +853,7 @@ static void rpmsg_virtio_del_ctrl_dev(struct rpmsg_device *rpdev_ctrl)
 {
 	if (!rpdev_ctrl)
 		return;
-	kfree(to_virtio_rpmsg_channel(rpdev_ctrl));
+	device_unregister(&rpdev_ctrl->dev);
 }
 
 static int rpmsg_probe(struct virtio_device *vdev)
-- 
2.35.1

[PATCH 5.15 028/247] iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit d345b23200bcdbd2bd3582213d738c258b77718f ]

wait_for_completion_timeout() returns unsigned long not long.
it returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case

Fixes: e813dde6f833 ("iio: stmpe-adc: Use wait_for_completion_timeout")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Link: https://lore.kernel.org/r/20220412065150.14486-1-linmq006@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/stmpe-adc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index fba659bfdb40..64305d9fa560 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -61,7 +61,7 @@ struct stmpe_adc {
 static int stmpe_read_voltage(struct stmpe_adc *info,
 		struct iio_chan_spec const *chan, int *val)
 {
-	long ret;
+	unsigned long ret;
 
 	mutex_lock(&info->lock);
 
@@ -79,7 +79,7 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
 
 	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
-	if (ret <= 0) {
+	if (ret == 0) {
 		stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
 				STMPE_ADC_CH(info->channel));
 		mutex_unlock(&info->lock);
@@ -96,7 +96,7 @@ static int stmpe_read_voltage(struct stmpe_adc *info,
 static int stmpe_read_temp(struct stmpe_adc *info,
 		struct iio_chan_spec const *chan, int *val)
 {
-	long ret;
+	unsigned long ret;
 
 	mutex_lock(&info->lock);
 
@@ -114,7 +114,7 @@ static int stmpe_read_temp(struct stmpe_adc *info,
 
 	ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT);
 
-	if (ret <= 0) {
+	if (ret == 0) {
 		mutex_unlock(&info->lock);
 		return -ETIMEDOUT;
 	}
-- 
2.35.1

[PATCH 5.15 029/247] iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeout

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 50f2959113cb6756ffd73c4fedc712cf2661f711 ]

wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.

Fixes: 3cef2e31b54b ("iio: proximity: vl53l0x: Add IRQ support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220412064210.10734-1-linmq006@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/proximity/vl53l0x-i2c.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
index cf38144b6f95..13a87d3e3544 100644
--- a/drivers/iio/proximity/vl53l0x-i2c.c
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -104,6 +104,7 @@ static int vl53l0x_read_proximity(struct vl53l0x_data *data,
 	u16 tries = 20;
 	u8 buffer[12];
 	int ret;
+	unsigned long time_left;
 
 	ret = i2c_smbus_write_byte_data(client, VL_REG_SYSRANGE_START, 1);
 	if (ret < 0)
@@ -112,10 +113,8 @@ static int vl53l0x_read_proximity(struct vl53l0x_data *data,
 	if (data->client->irq) {
 		reinit_completion(&data->completion);
 
-		ret = wait_for_completion_timeout(&data->completion, HZ/10);
-		if (ret < 0)
-			return ret;
-		else if (ret == 0)
+		time_left = wait_for_completion_timeout(&data->completion, HZ/10);
+		if (time_left == 0)
 			return -ETIMEDOUT;
 
 		vl53l0x_clear_irq(data);
-- 
2.35.1

[PATCH 5.15 030/247] iio: adc: sc27xx: fix read big scale voltage not right

[Greg Kroah-Hartman]

From: Cixi Geng <cixi.geng1@unisoc.com>

[ Upstream commit ad930a75613282400179361e220e58b87386b8c7 ]

Fix wrong configuration value of SC27XX_ADC_SCALE_MASK and
SC27XX_ADC_SCALE_SHIFT by spec documetation.

Fixes: 5df362a6cf49c (iio: adc: Add Spreadtrum SC27XX PMICs ADC support)
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20220419142458.884933-3-gengcixi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/sc27xx_adc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index 00098caf6d9e..aee076c8e2b1 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -36,8 +36,8 @@
 
 /* Bits and mask definition for SC27XX_ADC_CH_CFG register */
 #define SC27XX_ADC_CHN_ID_MASK		GENMASK(4, 0)
-#define SC27XX_ADC_SCALE_MASK		GENMASK(10, 8)
-#define SC27XX_ADC_SCALE_SHIFT		8
+#define SC27XX_ADC_SCALE_MASK		GENMASK(10, 9)
+#define SC27XX_ADC_SCALE_SHIFT		9
 
 /* Bits definitions for SC27XX_ADC_INT_EN registers */
 #define SC27XX_ADC_IRQ_EN		BIT(0)
-- 
2.35.1

[PATCH 5.15 031/247] iio: adc: sc27xx: Fine tune the scale calibration values

[Greg Kroah-Hartman]

From: Cixi Geng <cixi.geng1@unisoc.com>

[ Upstream commit 5a7a184b11c6910f47600ff5cbbee34168f701a8 ]

Small adjustment the scale calibration value for the sc2731,
use new name sc2731_[big|small]_scale_graph_calib, and remove
the origin [big|small]_scale_graph_calib struct for unused.

Fixes: 8ba0dbfd07a35 (iio: adc: sc27xx: Add ADC scale calibration)
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220419142458.884933-4-gengcixi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/sc27xx_adc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index aee076c8e2b1..cfe003cc4f0b 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -103,14 +103,14 @@ static struct sc27xx_adc_linear_graph small_scale_graph = {
 	100, 341,
 };
 
-static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
-	4200, 856,
-	3600, 733,
+static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = {
+	4200, 850,
+	3600, 728,
 };
 
-static const struct sc27xx_adc_linear_graph small_scale_graph_calib = {
-	1000, 833,
-	100, 80,
+static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = {
+	1000, 838,
+	100, 84,
 };
 
 static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc)
@@ -130,11 +130,11 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
 	size_t len;
 
 	if (big_scale) {
-		calib_graph = &big_scale_graph_calib;
+		calib_graph = &sc2731_big_scale_graph_calib;
 		graph = &big_scale_graph;
 		cell_name = "big_scale_calib";
 	} else {
-		calib_graph = &small_scale_graph_calib;
+		calib_graph = &sc2731_small_scale_graph_calib;
 		graph = &small_scale_graph;
 		cell_name = "small_scale_calib";
 	}
-- 
2.35.1

[PATCH 5.15 032/247] rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 59d6f72f6f9c92fec8757d9e29527da828e9281f ]

irq_of_parse_and_map() returns 0 on failure, so this should not be
passed further as error return code.

Fixes: 1a358d350664 ("rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220423093932.32136-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/qcom_smd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 775a7e44ac68..370688e8646b 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1406,7 +1406,7 @@ static int qcom_smd_parse_edge(struct device *dev,
 	irq = irq_of_parse_and_map(node, 0);
 	if (!irq) {
 		dev_err(dev, "required smd interrupt missing\n");
-		ret = irq;
+		ret = -EINVAL;
 		goto put_node;
 	}
 
-- 
2.35.1

[PATCH 5.15 033/247] pvpanic: Fix typos in the comments

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit cc5b392d0f94f27743583140d819fa35a46899db ]

Fix a few spelling typos in the comments.

Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210829124354.81653-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/pvpanic/pvpanic-mmio.c | 2 +-
 drivers/misc/pvpanic/pvpanic.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/pvpanic/pvpanic-mmio.c b/drivers/misc/pvpanic/pvpanic-mmio.c
index be4016084979..61dbff5f0065 100644
--- a/drivers/misc/pvpanic/pvpanic-mmio.c
+++ b/drivers/misc/pvpanic/pvpanic-mmio.c
@@ -100,7 +100,7 @@ static int pvpanic_mmio_probe(struct platform_device *pdev)
 	pi->base = base;
 	pi->capability = PVPANIC_PANICKED | PVPANIC_CRASH_LOADED;
 
-	/* initlize capability by RDPT */
+	/* initialize capability by RDPT */
 	pi->capability &= ioread8(base);
 	pi->events = pi->capability;
 
diff --git a/drivers/misc/pvpanic/pvpanic.c b/drivers/misc/pvpanic/pvpanic.c
index bb7aa6368538..700d7d02c800 100644
--- a/drivers/misc/pvpanic/pvpanic.c
+++ b/drivers/misc/pvpanic/pvpanic.c
@@ -58,7 +58,7 @@ pvpanic_panic_notify(struct notifier_block *nb, unsigned long code,
 
 static struct notifier_block pvpanic_panic_nb = {
 	.notifier_call = pvpanic_panic_notify,
-	.priority = 1, /* let this called before broken drm_fb_helper */
+	.priority = 1, /* let this called before broken drm_fb_helper() */
 };
 
 static void pvpanic_remove(void *param)
-- 
2.35.1

[PATCH 5.15 034/247] misc/pvpanic: Convert regular spinlock into trylock on panic path

[Greg Kroah-Hartman]

From: Guilherme G. Piccoli <gpiccoli@igalia.com>

[ Upstream commit e918c10265ef2bc82ce8a6fed6d8123d09ec1db3 ]

The pvpanic driver relies on panic notifiers to execute a callback
on panic event. Such function is executed in atomic context - the
panic function disables local IRQs, preemption and all other CPUs
that aren't running the panic code.

With that said, it's dangerous to use regular spinlocks in such path,
as introduced by commit b3c0f8774668 ("misc/pvpanic: probe multiple instances").
This patch fixes that by replacing regular spinlocks with the trylock
safer approach.

It also fixes an old comment (about a long gone framebuffer code) and
the notifier priority - we should execute hypervisor notifiers early,
deferring this way the panic action to the hypervisor, as expected by
the users that are setting up pvpanic.

Fixes: b3c0f8774668 ("misc/pvpanic: probe multiple instances")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Mihai Carabas <mihai.carabas@oracle.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20220427224924.592546-6-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/pvpanic/pvpanic.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/pvpanic/pvpanic.c b/drivers/misc/pvpanic/pvpanic.c
index 700d7d02c800..b9e6400a574b 100644
--- a/drivers/misc/pvpanic/pvpanic.c
+++ b/drivers/misc/pvpanic/pvpanic.c
@@ -34,7 +34,9 @@ pvpanic_send_event(unsigned int event)
 {
 	struct pvpanic_instance *pi_cur;
 
-	spin_lock(&pvpanic_lock);
+	if (!spin_trylock(&pvpanic_lock))
+		return;
+
 	list_for_each_entry(pi_cur, &pvpanic_list, list) {
 		if (event & pi_cur->capability & pi_cur->events)
 			iowrite8(event, pi_cur->base);
@@ -56,9 +58,13 @@ pvpanic_panic_notify(struct notifier_block *nb, unsigned long code,
 	return NOTIFY_DONE;
 }
 
+/*
+ * Call our notifier very early on panic, deferring the
+ * action taken to the hypervisor.
+ */
 static struct notifier_block pvpanic_panic_nb = {
 	.notifier_call = pvpanic_panic_notify,
-	.priority = 1, /* let this called before broken drm_fb_helper() */
+	.priority = INT_MAX,
 };
 
 static void pvpanic_remove(void *param)
-- 
2.35.1

[PATCH 5.15 035/247] phy: qcom-qmp: fix pipe-clock imbalance on power-on failure

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ]

Make sure to disable the pipe clock also if ufs-reset deassertion fails
during power on.

Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit().

Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 9bb19c4bfe79..ed69d455ac0e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -4802,7 +4802,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
 
 	ret = reset_control_deassert(qmp->ufs_reset);
 	if (ret)
-		goto err_lane_rst;
+		goto err_pcs_ready;
 
 	qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
 			       cfg->pcs_misc_tbl_num);
-- 
2.35.1

[PATCH 5.15 036/247] power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit f61509a6f0b70f5bedea34efaf8065621689bd7a ]

Some "T3 MRD" mini-PCs / HDMI-sticks without a battery use a different
value then "5.11" for their DMI BIOS version field.

Drop the BIOS version check so that the no-battery "T3 MRD" DMI quirk
applies to these too.

Fixes: 3a06b912a5ce ("power: supply: axp288_fuel_gauge: Make "T3 MRD" no_battery_list DMI entry more generic")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/axp288_fuel_gauge.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index c1da217fdb0e..97e8663c08df 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -605,7 +605,6 @@ static const struct dmi_system_id axp288_no_battery_list[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "3"),
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
-			DMI_MATCH(DMI_BIOS_VERSION, "5.11"),
 		},
 	},
 	{}
-- 
2.35.1

[PATCH 5.15 037/247] serial: sifive: Report actual baud base rather than fixed 115200

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

[ Upstream commit 0a7ff843d507ce2cca2c3b7e169ee56e28133530 ]

The base baud value reported is supposed to be the highest baud rate
that can be set for a serial port.  The SiFive FU740-C000 SOC's on-chip
UART supports baud rates of up to 1/16 of the input clock rate, which is
the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive
Unmatched board.

However the sifive UART driver reports a fixed value of 115200 instead:

10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0
10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0

even though we already support setting higher baud rates, e.g.:

$ tty
/dev/ttySIF1
$ stty speed
230400

The baud base value is computed by the serial core by dividing the UART
clock recorded in `struct uart_port' by 16, which is also the minimum
value of the clock divider supported, so correct the baud base value
reported by setting the UART clock recorded to the input clock rate
rather than 115200:

10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0
10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0


[1] "SiFive FU740-C000 Manual", v1p3, SiFive, Inc., August 13, 2021,
    Section 16.9 "Baud Rate Divisor Register (div)", pp.143-144

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1f1496a923b6 ("riscv: Fix sifive serial driver")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656280.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sifive.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 0ac0371f943b..a579d46ed78c 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -998,7 +998,7 @@ static int sifive_serial_probe(struct platform_device *pdev)
 	/* Set up clock divider */
 	ssp->clkin_rate = clk_get_rate(ssp->clk);
 	ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
-	ssp->port.uartclk = ssp->baud_rate * 16;
+	ssp->port.uartclk = ssp->clkin_rate;
 	__ssp_update_div(ssp);
 
 	platform_set_drvdata(pdev, ssp);
-- 
2.35.1

[PATCH 5.15 038/247] export: fix string handling of namespace in EXPORT_SYMBOL_NS

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d143b9db8069f0e2a0fa34484e806a55a0dd4855 ]

Commit c3a6cf19e695 ("export: avoid code duplication in
include/linux/export.h") broke the ability for a defined string to be
used as a namespace value.  Fix this up by using stringify to properly
encode the namespace name.

Fixes: c3a6cf19e695 ("export: avoid code duplication in include/linux/export.h")
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Matthias Maennich <maennich@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220427090442.2105905-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/export.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/linux/export.h b/include/linux/export.h
index 27d848712b90..5910ccb66ca2 100644
--- a/include/linux/export.h
+++ b/include/linux/export.h
@@ -2,6 +2,8 @@
 #ifndef _LINUX_EXPORT_H
 #define _LINUX_EXPORT_H
 
+#include <linux/stringify.h>
+
 /*
  * Export symbols from the kernel to modules.  Forked from module.h
  * to reduce the amount of pointless cruft we feed to gcc when only
@@ -154,7 +156,6 @@ struct kernel_symbol {
 #endif /* CONFIG_MODULES */
 
 #ifdef DEFAULT_SYMBOL_NAMESPACE
-#include <linux/stringify.h>
 #define _EXPORT_SYMBOL(sym, sec)	__EXPORT_SYMBOL(sym, sec, __stringify(DEFAULT_SYMBOL_NAMESPACE))
 #else
 #define _EXPORT_SYMBOL(sym, sec)	__EXPORT_SYMBOL(sym, sec, "")
@@ -162,8 +163,8 @@ struct kernel_symbol {
 
 #define EXPORT_SYMBOL(sym)		_EXPORT_SYMBOL(sym, "")
 #define EXPORT_SYMBOL_GPL(sym)		_EXPORT_SYMBOL(sym, "_gpl")
-#define EXPORT_SYMBOL_NS(sym, ns)	__EXPORT_SYMBOL(sym, "", #ns)
-#define EXPORT_SYMBOL_NS_GPL(sym, ns)	__EXPORT_SYMBOL(sym, "_gpl", #ns)
+#define EXPORT_SYMBOL_NS(sym, ns)	__EXPORT_SYMBOL(sym, "", __stringify(ns))
+#define EXPORT_SYMBOL_NS_GPL(sym, ns)	__EXPORT_SYMBOL(sym, "_gpl", __stringify(ns))
 
 #endif /* !__ASSEMBLY__ */
 
-- 
2.35.1

[PATCH 5.15 039/247] soundwire: intel: prevent pm_runtime resume prior to system suspend

[Greg Kroah-Hartman]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 6d9f2dadba698114fed97b224578c5338a36b0d9 ]

commit e38f9ff63e6d ("ACPI: scan: Do not add device IDs from _CID if _HID is not valid")
exposes a race condition on a TGL RVP device leading to a timeout.

The detailed analysis shows the RT711 codec driver scheduling a jack
detection workqueue while attaching during a spurious pm_runtime
resume, and the work function happens to be scheduled after the
manager device is suspended.

The direct link between this ACPI patch and a spurious pm_runtime
resume is not obvious; the most likely explanation is that a change in
the ACPI device linked list management modifies the order in which the
pm_runtime device status is checked and exposes a race condition that
was probably present for a very long time, but was not identified.

We already have a check in the .prepare stage, where we will resume to
full power from specific clock-stop modes. In all other cases, we
don't need to resume to full power by default. Adding the
SMART_SUSPEND flag prevents the spurious resume from happening.

BugLink: https://github.com/thesofproject/linux/issues/3459
Fixes: 029bfd1cd53cd ("soundwire: intel: conditionally exit clock stop mode on system suspend")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220420023241.14335-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/intel.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index f72d36654ac2..38e7f1a2bb97 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -1298,6 +1298,9 @@ static int intel_link_probe(struct auxiliary_device *auxdev,
 	/* use generic bandwidth allocation algorithm */
 	sdw->cdns.bus.compute_params = sdw_compute_params;
 
+	/* avoid resuming from pm_runtime suspend if it's not required */
+	dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND);
+
 	ret = sdw_bus_master_add(bus, dev, dev->fwnode);
 	if (ret) {
 		dev_err(dev, "sdw_bus_master_add fail: %d\n", ret);
-- 
2.35.1

[PATCH 5.15 040/247] coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier

[Greg Kroah-Hartman]

From: Guilherme G. Piccoli <gpiccoli@igalia.com>

[ Upstream commit 1adff542d67a2ed1120955cb219bfff8a9c53f59 ]

The panic notifier infrastructure executes registered callbacks when
a panic event happens - such callbacks are executed in atomic context,
with interrupts and preemption disabled in the running CPU and all other
CPUs disabled. That said, mutexes in such context are not a good idea.

This patch replaces a regular mutex with a mutex_trylock safer approach;
given the nature of the mutex used in the driver, it should be pretty
uncommon being unable to acquire such mutex in the panic path, hence
no functional change should be observed (and if it is, that would be
likely a deadlock with the regular mutex).

Fixes: 2227b7c74634 ("coresight: add support for CPU debug module")
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220427224924.592546-10-gpiccoli@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-cpu-debug.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
index 00de46565bc4..c60442970c2a 100644
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -380,9 +380,10 @@ static int debug_notifier_call(struct notifier_block *self,
 	int cpu;
 	struct debug_drvdata *drvdata;
 
-	mutex_lock(&debug_lock);
+	/* Bail out if we can't acquire the mutex or the functionality is off */
+	if (!mutex_trylock(&debug_lock))
+		return NOTIFY_DONE;
 
-	/* Bail out if the functionality is disabled */
 	if (!debug_enable)
 		goto skip_dump;
 
@@ -401,7 +402,7 @@ static int debug_notifier_call(struct notifier_block *self,
 
 skip_dump:
 	mutex_unlock(&debug_lock);
-	return 0;
+	return NOTIFY_DONE;
 }
 
 static struct notifier_block debug_notifier = {
-- 
2.35.1

[PATCH 5.15 041/247] ksmbd: fix reference count leak in smb_check_perm_dacl()

[Greg Kroah-Hartman]

From: Xin Xiong <xiongx18@fudan.edu.cn>

[ Upstream commit d21a580dafc69aa04f46e6099616146a536b0724 ]

The issue happens in a specific path in smb_check_perm_dacl(). When
"id" and "uid" have the same value, the function simply jumps out of
the loop without decrementing the reference count of the object
"posix_acls", which is increased by get_acl() earlier. This may
result in memory leaks.

Fix it by decreasing the reference count of "posix_acls" before
jumping to label "check_access_bits".

Fixes: 777cad1604d6 ("ksmbd: remove select FS_POSIX_ACL in Kconfig")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/smbacl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ksmbd/smbacl.c b/fs/ksmbd/smbacl.c
index bd792db32623..7e57ffdb4ce3 100644
--- a/fs/ksmbd/smbacl.c
+++ b/fs/ksmbd/smbacl.c
@@ -1274,6 +1274,7 @@ int smb_check_perm_dacl(struct ksmbd_conn *conn, struct path *path,
 					if (!access_bits)
 						access_bits =
 							SET_MINIMUM_RIGHTS;
+					posix_acl_release(posix_acls);
 					goto check_access_bits;
 				}
 			}
-- 
2.35.1

[PATCH 5.15 042/247] extcon: ptn5150: Add queue work sync before driver release

[Greg Kroah-Hartman]

From: Li Jun <jun.li@nxp.com>

[ Upstream commit 782cd939cbe0f569197cd1c9b0477ee213167f04 ]

Add device managed action to sync pending queue work, otherwise
the queued work may run after the work is destroyed.

Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-ptn5150.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 5b9a3cf8df26..2a7874108df8 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -194,6 +194,13 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	return 0;
 }
 
+static void ptn5150_work_sync_and_put(void *data)
+{
+	struct ptn5150_info *info = data;
+
+	cancel_work_sync(&info->irq_work);
+}
+
 static int ptn5150_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
@@ -284,6 +291,10 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	if (ret)
 		return -EINVAL;
 
+	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+	if (ret)
+		return ret;
+
 	/*
 	 * Update current extcon state if for example OTG connection was there
 	 * before the probe
-- 
2.35.1

[PATCH 5.15 043/247] soc: rockchip: Fix refcount leak in rockchip_grf_init

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 9b59588d8be91c96bfb0371e912ceb4f16315dbf ]

of_find_matching_node_and_match returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 4c58063d4258 ("soc: rockchip: add driver handling grf setup")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516072013.19731-1-linmq006@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/rockchip/grf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/rockchip/grf.c b/drivers/soc/rockchip/grf.c
index 494cf2b5bf7b..343ff61ccccb 100644
--- a/drivers/soc/rockchip/grf.c
+++ b/drivers/soc/rockchip/grf.c
@@ -148,12 +148,14 @@ static int __init rockchip_grf_init(void)
 		return -ENODEV;
 	if (!match || !match->data) {
 		pr_err("%s: missing grf data\n", __func__);
+		of_node_put(np);
 		return -EINVAL;
 	}
 
 	grf_info = match->data;
 
 	grf = syscon_node_to_regmap(np);
+	of_node_put(np);
 	if (IS_ERR(grf)) {
 		pr_err("%s: could not get grf syscon\n", __func__);
 		return PTR_ERR(grf);
-- 
2.35.1

[PATCH 5.15 044/247] clocksource/drivers/riscv: Events are stopped during CPU suspend

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 232ccac1bd9b5bfe73895f527c08623e7fa0752d ]

Some implementations of the SBI time extension depend on hart-local
state (for example, CSRs) that are lost or hardware that is powered
down when a CPU is suspended. To be safe, the clockevents driver
cannot assume that timer IRQs will be received during CPU suspend.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220509012121.40031-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-riscv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index c51c5ed15aa7..0e7748df4be3 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -32,7 +32,7 @@ static int riscv_clock_next_event(unsigned long delta,
 static unsigned int riscv_clock_event_irq;
 static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
 	.name			= "riscv_timer_clockevent",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.features		= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP,
 	.rating			= 100,
 	.set_next_event		= riscv_clock_next_event,
 };
-- 
2.35.1

[PATCH 5.15 045/247] ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1

[Greg Kroah-Hartman]

From: Howard Chiu <howard_chiu@aspeedtech.com>

[ Upstream commit 4d338ee40ba89e508c5d3e1b4af956af7cb5e12e ]

Since mac0/1 and mac2/3 are physically located on different die,
they have different properties by nature, which is mac0/1 has smaller delay step.

The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid'
which enables the RX interface delay from the PHY chip.
Refer page 45 of SDK User Guide v08.00
https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf

Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
Link: https://lore.kernel.org/r/SG2PR06MB23152A548AAE81140B57DD69E6E09@SG2PR06MB2315.apcprd06.prod.outlook.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-ast2600-evb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..788448cdd6b3 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -103,7 +103,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +114,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
-- 
2.35.1

[PATCH 5.15 046/247] rtc: mt6397: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit d3b43eb505bffb8e4cdf6800c15660c001553fe6 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220505125043.1594771-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mt6397.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 80dc479a6ff0..1d297af80f87 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -269,6 +269,8 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 	rtc->addr_base = res->start;
 
 	rtc->data = of_device_get_match_data(&pdev->dev);
-- 
2.35.1

[PATCH 5.15 047/247] rtc: ftrtc010: Use platform_get_irq() to get the interrupt

[Greg Kroah-Hartman]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

[ Upstream commit 05020a733b02cf7a474305e620fb306cd3abfe84 ]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211220011524.17206-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-ftrtc010.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-ftrtc010.c b/drivers/rtc/rtc-ftrtc010.c
index ad3add5db4c8..53bb08fe1cd4 100644
--- a/drivers/rtc/rtc-ftrtc010.c
+++ b/drivers/rtc/rtc-ftrtc010.c
@@ -141,11 +141,9 @@ static int ftrtc010_rtc_probe(struct platform_device *pdev)
 		}
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res)
-		return -ENODEV;
-
-	rtc->rtc_irq = res->start;
+	rtc->rtc_irq = platform_get_irq(pdev, 0);
+	if (rtc->rtc_irq < 0)
+		return rtc->rtc_irq;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
-- 
2.35.1

[PATCH 5.15 048/247] rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit b520cbe5be37b1b9b401c0b6ecbdae32575273db ]

In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.

clk_disable_unprepare calls clk_disable() and clk_unprepare().
They will use IS_ERR_OR_NULL to check the argument.

Fixes: ac05fba39cc5 ("rtc: gemini: Add optional clock handling")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220403054912.31739-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-ftrtc010.c | 34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/rtc-ftrtc010.c b/drivers/rtc/rtc-ftrtc010.c
index 53bb08fe1cd4..25c6e7d9570f 100644
--- a/drivers/rtc/rtc-ftrtc010.c
+++ b/drivers/rtc/rtc-ftrtc010.c
@@ -137,26 +137,34 @@ static int ftrtc010_rtc_probe(struct platform_device *pdev)
 		ret = clk_prepare_enable(rtc->extclk);
 		if (ret) {
 			dev_err(dev, "failed to enable EXTCLK\n");
-			return ret;
+			goto err_disable_pclk;
 		}
 	}
 
 	rtc->rtc_irq = platform_get_irq(pdev, 0);
-	if (rtc->rtc_irq < 0)
-		return rtc->rtc_irq;
+	if (rtc->rtc_irq < 0) {
+		ret = rtc->rtc_irq;
+		goto err_disable_extclk;
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
+	if (!res) {
+		ret = -ENODEV;
+		goto err_disable_extclk;
+	}
 
 	rtc->rtc_base = devm_ioremap(dev, res->start,
 				     resource_size(res));
-	if (!rtc->rtc_base)
-		return -ENOMEM;
+	if (!rtc->rtc_base) {
+		ret = -ENOMEM;
+		goto err_disable_extclk;
+	}
 
 	rtc->rtc_dev = devm_rtc_allocate_device(dev);
-	if (IS_ERR(rtc->rtc_dev))
-		return PTR_ERR(rtc->rtc_dev);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_disable_extclk;
+	}
 
 	rtc->rtc_dev->ops = &ftrtc010_rtc_ops;
 
@@ -172,9 +180,15 @@ static int ftrtc010_rtc_probe(struct platform_device *pdev)
 	ret = devm_request_irq(dev, rtc->rtc_irq, ftrtc010_rtc_interrupt,
 			       IRQF_SHARED, pdev->name, dev);
 	if (unlikely(ret))
-		return ret;
+		goto err_disable_extclk;
 
 	return devm_rtc_register_device(rtc->rtc_dev);
+
+err_disable_extclk:
+	clk_disable_unprepare(rtc->extclk);
+err_disable_pclk:
+	clk_disable_unprepare(rtc->pclk);
+	return ret;
 }
 
 static int ftrtc010_rtc_remove(struct platform_device *pdev)
-- 
2.35.1

[PATCH 5.15 049/247] staging: r8188eu: add check for kzalloc

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit f94b47c6bde624d6c07f43054087607c52054a95 ]

As kzalloc() may return null pointer, it should be better to
check the return value and return error if fails in order
to avoid dereference of null pointer.
Moreover, the return value of rtw_alloc_hwxmits() should also
be dealt with.

Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220518075957.514603-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/r8188eu/core/rtw_xmit.c    | 13 +++++++++++--
 drivers/staging/r8188eu/include/rtw_xmit.h |  2 +-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
index 46fe62c7c32c..0ee4f88a60d4 100644
--- a/drivers/staging/r8188eu/core/rtw_xmit.c
+++ b/drivers/staging/r8188eu/core/rtw_xmit.c
@@ -179,7 +179,12 @@ s32	_rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter)
 
 	pxmitpriv->free_xmit_extbuf_cnt = num_xmit_extbuf;
 
-	rtw_alloc_hwxmits(padapter);
+	res = rtw_alloc_hwxmits(padapter);
+	if (res) {
+		res = _FAIL;
+		goto exit;
+	}
+
 	rtw_init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
 
 	for (i = 0; i < 4; i++)
@@ -1516,7 +1521,7 @@ s32 rtw_xmit_classifier(struct adapter *padapter, struct xmit_frame *pxmitframe)
 	return res;
 }
 
-void rtw_alloc_hwxmits(struct adapter *padapter)
+int rtw_alloc_hwxmits(struct adapter *padapter)
 {
 	struct hw_xmit *hwxmits;
 	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
@@ -1524,6 +1529,8 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
 	pxmitpriv->hwxmit_entry = HWXMIT_ENTRY;
 
 	pxmitpriv->hwxmits = kzalloc(sizeof(struct hw_xmit) * pxmitpriv->hwxmit_entry, GFP_KERNEL);
+	if (!pxmitpriv->hwxmits)
+		return -ENOMEM;
 
 	hwxmits = pxmitpriv->hwxmits;
 
@@ -1540,6 +1547,8 @@ void rtw_alloc_hwxmits(struct adapter *padapter)
 		hwxmits[3] .sta_queue = &pxmitpriv->bk_pending;
 	} else {
 	}
+
+	return 0;
 }
 
 void rtw_free_hwxmits(struct adapter *padapter)
diff --git a/drivers/staging/r8188eu/include/rtw_xmit.h b/drivers/staging/r8188eu/include/rtw_xmit.h
index 5f6e2402e5c4..762a2fa3bd17 100644
--- a/drivers/staging/r8188eu/include/rtw_xmit.h
+++ b/drivers/staging/r8188eu/include/rtw_xmit.h
@@ -345,7 +345,7 @@ s32 rtw_txframes_sta_ac_pending(struct adapter *padapter,
 void rtw_init_hwxmits(struct hw_xmit *phwxmit, int entry);
 s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, struct adapter *padapter);
 void _rtw_free_xmit_priv(struct xmit_priv *pxmitpriv);
-void rtw_alloc_hwxmits(struct adapter *padapter);
+int rtw_alloc_hwxmits(struct adapter *padapter);
 void rtw_free_hwxmits(struct adapter *padapter);
 s32 rtw_xmit(struct adapter *padapter, struct sk_buff **pkt);
 
-- 
2.35.1

[PATCH 5.15 050/247] tty: n_gsm: Dont ignore write return value in gsmld_output()

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 9136c68346d096697935b9840782f7051d5796c5 ]

We currently have gsmld_output() ignore the return value from device
write. This means we will lose packets if device write returns 0 or
an error.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210930060624.46523-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_gsm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1767503de744..0722860b6f54 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -692,7 +692,7 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 			print_hex_dump_bytes("gsm_data_kick: ",
 					     DUMP_PREFIX_OFFSET,
 					     gsm->txframe, len);
-		if (gsmld_output(gsm, gsm->txframe, len) < 0)
+		if (gsmld_output(gsm, gsm->txframe, len) <= 0)
 			break;
 		/* FIXME: Can eliminate one SOF in many more cases */
 		gsm->tx_bytes -= msg->len;
@@ -2373,8 +2373,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
 	if (debug & 4)
 		print_hex_dump_bytes("gsmld_output: ", DUMP_PREFIX_OFFSET,
 				     data, len);
-	gsm->tty->ops->write(gsm->tty, data, len);
-	return len;
+	return gsm->tty->ops->write(gsm->tty, data, len);
 }
 
 /**
-- 
2.35.1

[PATCH 5.15 051/247] tty: n_gsm: Fix packet data hex dump output

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 925ea0fa5277c1e6bb9e51955ef34eea9736c3d7 ]

The module param debug for n_gsm uses KERN_INFO level, but the hexdump
now uses KERN_DEBUG level. This started after commit 091cb0994edd
("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds").
We now use dynamic_hex_dump() unless DEBUG is set.

This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike
earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls
print_hex_dump() with KERN_INFO to match what n_gsm is doing with the
other debug related output.

Fixes: 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_gsm.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 0722860b6f54..a246f429ffb7 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -443,6 +443,25 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
 	return modembits;
 }
 
+static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
+			       unsigned long len)
+{
+	char *prefix;
+
+	if (!fname) {
+		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, data, len,
+			       true);
+		return;
+	}
+
+	prefix = kasprintf(GFP_KERNEL, "%s: ", fname);
+	if (!prefix)
+		return;
+	print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, 16, 1, data, len,
+		       true);
+	kfree(prefix);
+}
+
 /**
  *	gsm_print_packet	-	display a frame for debug
  *	@hdr: header to print before decode
@@ -507,7 +526,7 @@ static void gsm_print_packet(const char *hdr, int addr, int cr,
 	else
 		pr_cont("(F)");
 
-	print_hex_dump_bytes("", DUMP_PREFIX_NONE, data, dlen);
+	gsm_hex_dump_bytes(NULL, data, dlen);
 }
 
 
@@ -689,9 +708,7 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 		}
 
 		if (debug & 4)
-			print_hex_dump_bytes("gsm_data_kick: ",
-					     DUMP_PREFIX_OFFSET,
-					     gsm->txframe, len);
+			gsm_hex_dump_bytes(__func__, gsm->txframe, len);
 		if (gsmld_output(gsm, gsm->txframe, len) <= 0)
 			break;
 		/* FIXME: Can eliminate one SOF in many more cases */
@@ -2371,8 +2388,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
 		return -ENOSPC;
 	}
 	if (debug & 4)
-		print_hex_dump_bytes("gsmld_output: ", DUMP_PREFIX_OFFSET,
-				     data, len);
+		gsm_hex_dump_bytes(__func__, data, len);
 	return gsm->tty->ops->write(gsm->tty, data, len);
 }
 
@@ -2448,8 +2464,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	char flags = TTY_NORMAL;
 
 	if (debug & 4)
-		print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET,
-				     cp, count);
+		gsm_hex_dump_bytes(__func__, cp, count);
 
 	for (; count; count--, cp++) {
 		if (fp)
-- 
2.35.1

[PATCH 5.15 052/247] serial: meson: acquire port->lock in startup()

[Greg Kroah-Hartman]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 589f892ac8ef244e47c5a00ffd8605daa1eaef8e ]

The uart_ops startup() callback is called without interrupts
disabled and without port->lock locked, relatively late during the
boot process (from the call path of console_on_rootfs()). If the
device is a console, it was already previously registered and could
be actively printing messages.

Since the startup() callback is reading/writing registers used by
the console write() callback (AML_UART_CONTROL), its access must
be synchronized using the port->lock. Currently it is not.

The startup() callback is the only function that explicitly enables
interrupts. Without the synchronization, it is possible that
interrupts become accidentally permanently disabled.

CPU0                           CPU1
meson_serial_console_write     meson_uart_startup
--------------------------     ------------------
spin_lock(port->lock)
val = readl(AML_UART_CONTROL)
uart_console_write()
                               writel(INT_EN, AML_UART_CONTROL)
writel(val, AML_UART_CONTROL)
spin_unlock(port->lock)

Add port->lock synchronization to meson_uart_startup() to avoid
racing with meson_serial_console_write().

Also add detailed comments to meson_uart_reset() explaining why it
is *not* using port->lock synchronization.

Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/meson_uart.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index efee3935917f..62e6c1af1344 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -253,6 +253,14 @@ static const char *meson_uart_type(struct uart_port *port)
 	return (port->type == PORT_MESON) ? "meson_uart" : NULL;
 }
 
+/*
+ * This function is called only from probe() using a temporary io mapping
+ * in order to perform a reset before setting up the device. Since the
+ * temporarily mapped region was successfully requested, there can be no
+ * console on this port at this time. Hence it is not necessary for this
+ * function to acquire the port->lock. (Since there is no console on this
+ * port at this time, the port->lock is not initialized yet.)
+ */
 static void meson_uart_reset(struct uart_port *port)
 {
 	u32 val;
@@ -267,9 +275,12 @@ static void meson_uart_reset(struct uart_port *port)
 
 static int meson_uart_startup(struct uart_port *port)
 {
+	unsigned long flags;
 	u32 val;
 	int ret = 0;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	val = readl(port->membase + AML_UART_CONTROL);
 	val |= AML_UART_CLEAR_ERR;
 	writel(val, port->membase + AML_UART_CONTROL);
@@ -285,6 +296,8 @@ static int meson_uart_startup(struct uart_port *port)
 	val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
 	writel(val, port->membase + AML_UART_MISC);
 
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	ret = request_irq(port->irq, meson_uart_interrupt, 0,
 			  port->name, port);
 
-- 
2.35.1

[PATCH 5.15 053/247] serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit af0179270977508df6986b51242825d7edd59caf ]

SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior
within RS485 operation. The driver checks if they have the same value
which is not possible to realize with the hardware. The check is taken
regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the
check fails, which creates problems.

This check makes it unnecessarily complicated to turn RS485 mode off as
simple zeroed serial_rs485 struct will trigger that equal values check.
In addition, the driver itself memsets its rs485 structure to zero when
RS485 is disabled but if userspace would try to make an TIOCSRS485
ioctl() call with the very same struct, it would end up failing with
-EINVAL which doesn't make much sense.

Resolve the problem by moving the check inside SER_RS485_ENABLED block.

Fixes: 7ecc77011c6f ("serial: 8250_fintek: Return -EINVAL on invalid configuration")
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_fintek.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 251f0018ae8c..dba5950b8d0e 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -200,12 +200,12 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	if (!pdata)
 		return -EINVAL;
 
-	/* Hardware do not support same RTS level on send and receive */
-	if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
-			!(rs485->flags & SER_RS485_RTS_AFTER_SEND))
-		return -EINVAL;
 
 	if (rs485->flags & SER_RS485_ENABLED) {
+		/* Hardware do not support same RTS level on send and receive */
+		if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+		    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
+			return -EINVAL;
 		memset(rs485->padding, 0, sizeof(rs485->padding));
 		config |= RS485_URA;
 	} else {
-- 
2.35.1

[PATCH 5.15 054/247] serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0258502f11a4f6036b5f8b34b09027c8a92def3a ]

drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’:
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’?
  if (!udbg_port)
       ^~~~~~~~~
       uart_port

commit d142585bceb3 leave this corner, wrap it with #ifdef block

Fixes: d142585bceb3 ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index d6d3db9c3b1f..db07d6a5d764 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1247,7 +1247,7 @@ static int cpm_uart_init_port(struct device_node *np,
 	}
 
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-#ifdef CONFIG_CONSOLE_POLL
+#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_CPM_CONSOLE)
 	if (!udbg_port)
 #endif
 		udbg_putc = NULL;
-- 
2.35.1

[PATCH 5.15 055/247] serial: digicolor-usart: Dont allow CS5-6

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit fd63031b8c0763addcecdefe0e0c59d49646204e ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/digicolor-usart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index c7f81aa1ce91..5fea9bf86e85 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -309,6 +309,8 @@ static void digicolor_uart_set_termios(struct uart_port *port,
 	case CS8:
 	default:
 		config |= UA_CONFIG_CHAR_LEN;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
 		break;
 	}
 
-- 
2.35.1

[PATCH 5.15 056/247] serial: rda-uart: Dont allow CS5-6

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 098333a9c7d12bb3ce44c82f08b4d810c44d31b0 ]

Only CS7 and CS8 are supported but CSIZE is not sanitized after
fallthrough from CS5 or CS6 to CS7.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c10b13325ced (tty: serial: Add RDA8810PL UART driver)
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/rda-uart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index d550d8fa2fab..a8fe1c3ebcd9 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -262,6 +262,8 @@ static void rda_uart_set_termios(struct uart_port *port,
 		fallthrough;
 	case CS7:
 		ctrl &= ~RDA_UART_DBITS_8;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS7;
 		break;
 	default:
 		ctrl |= RDA_UART_DBITS_8;
-- 
2.35.1

[PATCH 5.15 057/247] serial: txx9: Dont allow CS5-6

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 79ac88655dc0551e3571ad16bdabdbe65d61553e ]

Only CS7 and CS8 are supported but CSIZE is not sanitized with
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/serial_txx9.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index aaca4fe38486..1f8362d5e3b9 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -644,6 +644,8 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
 	case CS6:	/* not supported */
 	case CS8:
 		cval |= TXX9_SILCR_UMODE_8BIT;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
 		break;
 	}
 
-- 
2.35.1

[PATCH 5.15 058/247] serial: sh-sci: Dont allow CS5-6

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sh-sci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 89ee43061d3a..c5c0f39cb1c7 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2390,8 +2390,12 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	int best_clk = -1;
 	unsigned long flags;
 
-	if ((termios->c_cflag & CSIZE) == CS7)
+	if ((termios->c_cflag & CSIZE) == CS7) {
 		smr_val |= SCSMR_CHR;
+	} else {
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+	}
 	if (termios->c_cflag & PARENB)
 		smr_val |= SCSMR_PE;
 	if (termios->c_cflag & PARODD)
-- 
2.35.1

[PATCH 5.15 059/247] serial: sifive: Sanitize CSIZE and c_iflag

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit c069d2756c01ed36121fae6a42c14fdf1325c71d ]

Only CS8 is supported but CSIZE was not sanitized to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported
but were not cleared in termios c_iflag which is the machine-readable
format.

Fixes: 45c054d0815b (tty: serial: add driver for the SiFive UART)
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sifive.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index a579d46ed78c..4b0fa91e9f9a 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -666,12 +666,16 @@ static void sifive_serial_set_termios(struct uart_port *port,
 	int rate;
 	char nstop;
 
-	if ((termios->c_cflag & CSIZE) != CS8)
+	if ((termios->c_cflag & CSIZE) != CS8) {
 		dev_err_once(ssp->port.dev, "only 8-bit words supported\n");
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+	}
 	if (termios->c_iflag & (INPCK | PARMRK))
 		dev_err_once(ssp->port.dev, "parity checking not supported\n");
 	if (termios->c_iflag & BRKINT)
 		dev_err_once(ssp->port.dev, "BREAK detection not supported\n");
+	termios->c_iflag &= ~(INPCK|PARMRK|BRKINT);
 
 	/* Set number of stop bits */
 	nstop = (termios->c_cflag & CSTOPB) ? 2 : 1;
-- 
2.35.1

[PATCH 5.15 060/247] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/st-asc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 87e480cc8206..5a45633aaea8 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -535,10 +535,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* set character length */
 	if ((cflag & CSIZE) == CS7) {
 		ctrl_val |= ASC_CTL_MODE_7BIT_PAR;
+		cflag |= PARENB;
 	} else {
 		ctrl_val |= (cflag & PARENB) ?  ASC_CTL_MODE_8BIT_PAR :
 						ASC_CTL_MODE_8BIT;
+		cflag &= ~CSIZE;
+		cflag |= CS8;
 	}
+	termios->c_cflag = cflag;
 
 	/* set stop bit */
 	ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT;
-- 
2.35.1

[PATCH 5.15 061/247] serial: stm32-usart: Correct CSIZE, bits, and parity

[Greg Kroah-Hartman]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 1deeda8d2877c18bc2b9eeee10dd6d2628852848 ]

Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c8a9d043947b (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/stm32-usart.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 810a1b0b6520..10e9f983de62 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -807,13 +807,22 @@ static void stm32_usart_set_termios(struct uart_port *port,
 	 * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00
 	 * M0 and M1 already cleared by cr1 initialization.
 	 */
-	if (bits == 9)
+	if (bits == 9) {
 		cr1 |= USART_CR1_M0;
-	else if ((bits == 7) && cfg->has_7bits_data)
+	} else if ((bits == 7) && cfg->has_7bits_data) {
 		cr1 |= USART_CR1_M1;
-	else if (bits != 8)
+	} else if (bits != 8) {
 		dev_dbg(port->dev, "Unsupported data bits config: %u bits\n"
 			, bits);
+		cflag &= ~CSIZE;
+		cflag |= CS8;
+		termios->c_cflag = cflag;
+		bits = 8;
+		if (cflag & PARENB) {
+			bits++;
+			cr1 |= USART_CR1_M0;
+		}
+	}
 
 	if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch ||
 				       (stm32_port->fifoen &&
-- 
2.35.1

[PATCH 5.15 062/247] firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 660ba678f9998aca6db74f2dd912fa5124f0fa31 ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix this issue by calling kobject_put().

Fixes: 948af1f0bbc8 ("firmware: Basic dmi-sysfs support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/dmi-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index 8b8127fa8955..4a93fb490cb4 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -603,7 +603,7 @@ static void __init dmi_sysfs_register_handle(const struct dmi_header *dh,
 				    "%d-%d", dh->type, entry->instance);
 
 	if (*ret) {
-		kfree(entry);
+		kobject_put(&entry->kobj);
 		return;
 	}
 
-- 
2.35.1

[PATCH 5.15 063/247] bus: ti-sysc: Fix warnings for unbind for serial

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit c337125b8834f9719dfda0e40b25eaa266f1b8cf ]

We can get "failed to disable" clock_unprepare warnings on unbind at least
for the serial console device if the unbind is done before the device has
been idled.

As some devices are using deferred idle, we must check the status for
pending idle work to idle the device.

Fixes: 76f0f772e469 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init")
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 00d46f3ae22f..e93912e56f28 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -3325,7 +3325,9 @@ static int sysc_remove(struct platform_device *pdev)
 	struct sysc *ddata = platform_get_drvdata(pdev);
 	int error;
 
-	cancel_delayed_work_sync(&ddata->idle_work);
+	/* Device can still be enabled, see deferred idle quirk in probe */
+	if (cancel_delayed_work_sync(&ddata->idle_work))
+		ti_sysc_idle(&ddata->idle_work.work);
 
 	error = pm_runtime_resume_and_get(ddata->dev);
 	if (error < 0) {
-- 
2.35.1

[PATCH 5.15 064/247] driver: base: fix UAF when driver_attach failed

[Greg Kroah-Hartman]

From: Schspa Shi <schspa@gmail.com>

[ Upstream commit 310862e574001a97ad02272bac0fd13f75f42a27 ]

When driver_attach(drv); failed, the driver_private will be freed.
But it has been added to the bus, which caused a UAF.

To fix it, we need to delete it from the bus when failed.

Fixes: 190888ac01d0 ("driver core: fix possible missing of device probe")
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220513112444.45112-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/bus.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index bdc98c5713d5..d171535fc18f 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -617,7 +617,7 @@ int bus_add_driver(struct device_driver *drv)
 	if (drv->bus->p->drivers_autoprobe) {
 		error = driver_attach(drv);
 		if (error)
-			goto out_unregister;
+			goto out_del_list;
 	}
 	module_add_driver(drv->owner, drv);
 
@@ -644,6 +644,8 @@ int bus_add_driver(struct device_driver *drv)
 
 	return 0;
 
+out_del_list:
+	klist_del(&priv->knode_bus);
 out_unregister:
 	kobject_put(&priv->kobj);
 	/* drv->p is freed in driver_release()  */
-- 
2.35.1

[PATCH 5.15 065/247] driver core: fix deadlock in __device_attach

[Greg Kroah-Hartman]

From: Zhang Wensheng <zhangwensheng5@huawei.com>

[ Upstream commit b232b02bf3c205b13a26dcec08e53baddd8e59ed ]

In __device_attach function, The lock holding logic is as follows:
...
__device_attach
device_lock(dev)      // get lock dev
  async_schedule_dev(__device_attach_async_helper, dev); // func
    async_schedule_node
      async_schedule_node_domain(func)
        entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
	/* when fail or work limit, sync to execute func, but
	   __device_attach_async_helper will get lock dev as
	   well, which will lead to A-A deadlock.  */
	if (!entry || atomic_read(&entry_count) > MAX_WORK) {
	  func;
	else
	  queue_work_node(node, system_unbound_wq, &entry->work)
  device_unlock(dev)

As shown above, when it is allowed to do async probes, because of
out of memory or work limit, async work is not allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__device_attach_async_helper getting lock dev.

To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.

Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220518074516.1225580-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/dd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 95ae347df137..a480004b9897 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -944,6 +944,7 @@ static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
 static int __device_attach(struct device *dev, bool allow_async)
 {
 	int ret = 0;
+	bool async = false;
 
 	device_lock(dev);
 	if (dev->p->dead) {
@@ -982,7 +983,7 @@ static int __device_attach(struct device *dev, bool allow_async)
 			 */
 			dev_dbg(dev, "scheduling asynchronous probe\n");
 			get_device(dev);
-			async_schedule_dev(__device_attach_async_helper, dev);
+			async = true;
 		} else {
 			pm_request_idle(dev);
 		}
@@ -992,6 +993,8 @@ static int __device_attach(struct device *dev, bool allow_async)
 	}
 out_unlock:
 	device_unlock(dev);
+	if (async)
+		async_schedule_dev(__device_attach_async_helper, dev);
 	return ret;
 }
 
-- 
2.35.1

[PATCH 5.15 066/247] watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit b3ac0c58fa8934926360268f3d89ec7680644d7b ]

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220412070824.23708-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/rti_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index ae7f9357bb87..46c2a4bd9ebe 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -227,7 +227,7 @@ static int rti_wdt_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
-	if (ret) {
+	if (ret < 0) {
 		pm_runtime_put_noidle(dev);
 		pm_runtime_disable(&pdev->dev);
 		return dev_err_probe(dev, ret, "runtime pm failed\n");
-- 
2.35.1

[PATCH 5.15 067/247] watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 5d24df3d690809952528e7a19a43d84bc5b99d44 ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add  missing of_node_put() in some error paths.

Fixes: bf9006399939 ("watchdog: ts4800: add driver for TS-4800 watchdog")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220511114203.47420-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/ts4800_wdt.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c
index c137ad2bd5c3..0ea554c7cda5 100644
--- a/drivers/watchdog/ts4800_wdt.c
+++ b/drivers/watchdog/ts4800_wdt.c
@@ -125,13 +125,16 @@ static int ts4800_wdt_probe(struct platform_device *pdev)
 	ret = of_property_read_u32_index(np, "syscon", 1, &reg);
 	if (ret < 0) {
 		dev_err(dev, "no offset in syscon\n");
+		of_node_put(syscon_np);
 		return ret;
 	}
 
 	/* allocate memory for watchdog struct */
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt)
+	if (!wdt) {
+		of_node_put(syscon_np);
 		return -ENOMEM;
+	}
 
 	/* set regmap and offset to know where to write */
 	wdt->feed_offset = reg;
-- 
2.35.1

[PATCH 5.15 068/247] blk-mq: dont touch ->tagset in blk_mq_get_sq_hctx

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 5d05426e2d5fd7df8afc866b78c36b37b00188b7 ]

blk_mq_run_hw_queues() could be run when there isn't queued request and
after queue is cleaned up, at that time tagset is freed, because tagset
lifetime is covered by driver, and often freed after blk_cleanup_queue()
returns.

So don't touch ->tagset for figuring out current default hctx by the mapping
built in request queue, so use-after-free on tagset can be avoided. Meantime
this way should be fast than retrieving mapping from tagset.

Cc: "yukuai (C)" <yukuai3@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Fixes: b6e68ee82585 ("blk-mq: Improve performance of non-mq IO schedulers with multiple HW queues")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220522122350.743103-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 82de39926a9f..b70488e4db94 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1642,8 +1642,7 @@ static bool blk_mq_has_sqsched(struct request_queue *q)
  */
 static struct blk_mq_hw_ctx *blk_mq_get_sq_hctx(struct request_queue *q)
 {
-	struct blk_mq_hw_ctx *hctx;
-
+	struct blk_mq_ctx *ctx = blk_mq_get_ctx(q);
 	/*
 	 * If the IO scheduler does not respect hardware queues when
 	 * dispatching, we just don't bother with multiple HW queues and
@@ -1651,8 +1650,8 @@ static struct blk_mq_hw_ctx *blk_mq_get_sq_hctx(struct request_queue *q)
 	 * just causes lock contention inside the scheduler and pointless cache
 	 * bouncing.
 	 */
-	hctx = blk_mq_map_queue_type(q, HCTX_TYPE_DEFAULT,
-				     raw_smp_processor_id());
+	struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, 0, ctx);
+
 	if (!blk_mq_hctx_stopped(hctx))
 		return hctx;
 	return NULL;
-- 
2.35.1

[PATCH 5.15 069/247] ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit e4dd748dc87cf431af7b3954963be0d9f6150217 ]

There are multiple xDR and xFR registers, the index is
from 0 to 7. FSL_SAI_xDR and FSL_SAI_xFR is abandoned,
replace them with FSL_SAI_xDR0 and FSL_SAI_xFR0.

Fixes: 4f7a0728b530 ("ASoC: fsl_sai: Add support for SAI new version")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1653284661-18964-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_sai.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index bc60030967dd..f471467dfb3e 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -80,8 +80,8 @@
 #define FSL_SAI_xCR3(tx, ofs)	(tx ? FSL_SAI_TCR3(ofs) : FSL_SAI_RCR3(ofs))
 #define FSL_SAI_xCR4(tx, ofs)	(tx ? FSL_SAI_TCR4(ofs) : FSL_SAI_RCR4(ofs))
 #define FSL_SAI_xCR5(tx, ofs)	(tx ? FSL_SAI_TCR5(ofs) : FSL_SAI_RCR5(ofs))
-#define FSL_SAI_xDR(tx, ofs)	(tx ? FSL_SAI_TDR(ofs) : FSL_SAI_RDR(ofs))
-#define FSL_SAI_xFR(tx, ofs)	(tx ? FSL_SAI_TFR(ofs) : FSL_SAI_RFR(ofs))
+#define FSL_SAI_xDR0(tx)	(tx ? FSL_SAI_TDR0 : FSL_SAI_RDR0)
+#define FSL_SAI_xFR0(tx)	(tx ? FSL_SAI_TFR0 : FSL_SAI_RFR0)
 #define FSL_SAI_xMR(tx)		(tx ? FSL_SAI_TMR : FSL_SAI_RMR)
 
 /* SAI Transmit/Receive Control Register */
-- 
2.35.1

[PATCH 5.15 070/247] clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-oxnas-rps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
index 56c0cc32d0ac..d514b44e67dd 100644
--- a/drivers/clocksource/timer-oxnas-rps.c
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -236,7 +236,7 @@ static int __init oxnas_rps_timer_init(struct device_node *np)
 	}
 
 	rps->irq = irq_of_parse_and_map(np, 0);
-	if (rps->irq < 0) {
+	if (!rps->irq) {
 		ret = -EINVAL;
 		goto err_iomap;
 	}
-- 
2.35.1

[PATCH 5.15 071/247] s390/crypto: fix scatterwalk_unmap() callers in AES-GCM

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

[ Upstream commit bd52cd5e23f134019b23f0c389db0f9a436e4576 ]

The argument of scatterwalk_unmap() is supposed to be the void* that was
returned by the previous scatterwalk_map() call.
The s390 AES-GCM implementation was instead passing the pointer to the
struct scatter_walk.

This doesn't actually break anything because scatterwalk_unmap() only uses
its argument under CONFIG_HIGHMEM and ARCH_HAS_FLUSH_ON_KUNMAP.

Fixes: bf7fa038707c ("s390/crypto: add s390 platform specific aes gcm support.")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20220517143047.3054498-1-jannh@google.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/crypto/aes_s390.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 54c7536f2482..1023e9d43d44 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -701,7 +701,7 @@ static inline void _gcm_sg_unmap_and_advance(struct gcm_sg_walk *gw,
 					     unsigned int nbytes)
 {
 	gw->walk_bytes_remain -= nbytes;
-	scatterwalk_unmap(&gw->walk);
+	scatterwalk_unmap(gw->walk_ptr);
 	scatterwalk_advance(&gw->walk, nbytes);
 	scatterwalk_done(&gw->walk, 0, gw->walk_bytes_remain);
 	gw->walk_ptr = NULL;
@@ -776,7 +776,7 @@ static int gcm_out_walk_go(struct gcm_sg_walk *gw, unsigned int minbytesneeded)
 		goto out;
 	}
 
-	scatterwalk_unmap(&gw->walk);
+	scatterwalk_unmap(gw->walk_ptr);
 	gw->walk_ptr = NULL;
 
 	gw->ptr = gw->buf;
-- 
2.35.1

[PATCH 5.15 072/247] net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog

[Greg Kroah-Hartman]

From: Vincent Ray <vray@kalrayinc.com>

[ Upstream commit a54ce3703613e41fe1d98060b62ec09a3984dc28 ]

In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit()
does not provide any ordering guarantee as test_bit() is not an atomic
operation. This, added to the fact that the spin_trylock() call at
the beginning of qdisc_run_begin() does not guarantee acquire
semantics if it does not grab the lock, makes it possible for the
following statement :

if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))

to be executed before an enqueue operation called before
qdisc_run_begin().

As a result the following race can happen :

           CPU 1                             CPU 2

      qdisc_run_begin()               qdisc_run_begin() /* true */
        set(MISSED)                            .
      /* returns false */                      .
          .                            /* sees MISSED = 1 */
          .                            /* so qdisc not empty */
          .                            __qdisc_run()
          .                                    .
          .                              pfifo_fast_dequeue()
 ----> /* may be done here */                  .
|         .                                clear(MISSED)
|         .                                    .
|         .                                smp_mb __after_atomic();
|         .                                    .
|         .                                /* recheck the queue */
|         .                                /* nothing => exit   */
|   enqueue(skb1)
|         .
|   qdisc_run_begin()
|         .
|     spin_trylock() /* fail */
|         .
|     smp_mb__before_atomic() /* not enough */
|         .
 ---- if (test_bit(MISSED))
        return false;   /* exit */

In the above scenario, CPU 1 and CPU 2 both try to grab the
qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the
bypass code path, where it emits its skb then calls __qdisc_run().

CPU1 fails, sets MISSED and goes down the traditionnal enqueue() +
dequeue() code path. But when executing qdisc_run_begin() for the
second time, after enqueuing its skbuff, it sees the MISSED bit still
set (by itself) and consequently chooses to exit early without setting
it again nor trying to grab the spinlock again.

Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue
and found it empty, so it returned.

At the end of the sequence, we end up with skb1 enqueued in the
backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set,
and no __netif_schedule() called made. skb1 will now linger in the
qdisc until somebody later performs a full __qdisc_run(). Associated
to the bypass capacity of the qdisc, and the ability of the TCP layer
to avoid resending packets which it knows are still in the qdisc, this
can lead to serious traffic "holes" in a TCP connection.

We fix this by replacing the smp_mb__before_atomic() / test_bit() /
set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin()
by a single test_and_set_bit() call, which is more concise and
enforces the needed memory barriers.

Fixes: 89837eb4b246 ("net: sched: add barrier to ensure correct ordering for lockless qdisc")
Signed-off-by: Vincent Ray <vray@kalrayinc.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sch_generic.h | 36 ++++++++----------------------------
 1 file changed, 8 insertions(+), 28 deletions(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 4121ffd0faf8..9e9ff13adda8 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -173,37 +173,17 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc)
 		if (spin_trylock(&qdisc->seqlock))
 			return true;
 
-		/* Paired with smp_mb__after_atomic() to make sure
-		 * STATE_MISSED checking is synchronized with clearing
-		 * in pfifo_fast_dequeue().
+		/* No need to insist if the MISSED flag was already set.
+		 * Note that test_and_set_bit() also gives us memory ordering
+		 * guarantees wrt potential earlier enqueue() and below
+		 * spin_trylock(), both of which are necessary to prevent races
 		 */
-		smp_mb__before_atomic();
-
-		/* If the MISSED flag is set, it means other thread has
-		 * set the MISSED flag before second spin_trylock(), so
-		 * we can return false here to avoid multi cpus doing
-		 * the set_bit() and second spin_trylock() concurrently.
-		 */
-		if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))
+		if (test_and_set_bit(__QDISC_STATE_MISSED, &qdisc->state))
 			return false;
 
-		/* Set the MISSED flag before the second spin_trylock(),
-		 * if the second spin_trylock() return false, it means
-		 * other cpu holding the lock will do dequeuing for us
-		 * or it will see the MISSED flag set after releasing
-		 * lock and reschedule the net_tx_action() to do the
-		 * dequeuing.
-		 */
-		set_bit(__QDISC_STATE_MISSED, &qdisc->state);
-
-		/* spin_trylock() only has load-acquire semantic, so use
-		 * smp_mb__after_atomic() to ensure STATE_MISSED is set
-		 * before doing the second spin_trylock().
-		 */
-		smp_mb__after_atomic();
-
-		/* Retry again in case other CPU may not see the new flag
-		 * after it releases the lock at the end of qdisc_run_end().
+		/* Try to take the lock again to make sure that we will either
+		 * grab it or the CPU that still has it will see MISSED set
+		 * when testing it in qdisc_run_end()
 		 */
 		return spin_trylock(&qdisc->seqlock);
 	} else if (qdisc_is_running(qdisc)) {
-- 
2.35.1

[PATCH 5.15 073/247] net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e7e7104e2d5ddf3806a28695670f21bef471f1e1 ]

The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.

Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index ee1fd472e925..d2d7160b789c 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1991,6 +1991,9 @@ static int mtk_hwlro_get_fdir_entry(struct net_device *dev,
 	struct ethtool_rx_flow_spec *fsp =
 		(struct ethtool_rx_flow_spec *)&cmd->fs;
 
+	if (fsp->location >= ARRAY_SIZE(mac->hwlro_ip))
+		return -EINVAL;
+
 	/* only tcp dst ipv4 is meaningful, others are meaningless */
 	fsp->flow_type = TCP_V4_FLOW;
 	fsp->h_u.tcp_ip4_spec.ip4dst = ntohl(mac->hwlro_ip[fsp->location]);
-- 
2.35.1

[PATCH 5.15 074/247] net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 5dd89d2fc438457811cbbec07999ce0d80051ff5 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release
the refcount in error case.
Add missing of_node_put() to avoid refcount leak.

Fixes: b1f66a5bee07 ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support")
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 130346f74ee8..ea9d073e87fa 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1802,6 +1802,7 @@ static int am65_cpsw_init_cpts(struct am65_cpsw_common *common)
 	if (IS_ERR(cpts)) {
 		int ret = PTR_ERR(cpts);
 
+		of_node_put(node);
 		if (ret == -EOPNOTSUPP) {
 			dev_info(dev, "cpts disabled\n");
 			return 0;
@@ -2668,9 +2669,9 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 	if (!node)
 		return -ENOENT;
 	common->port_num = of_get_child_count(node);
+	of_node_put(node);
 	if (common->port_num < 1 || common->port_num > AM65_CPSW_MAX_PORTS)
 		return -ENOENT;
-	of_node_put(node);
 
 	common->rx_flow_id_base = -1;
 	init_completion(&common->tdown_complete);
-- 
2.35.1

[PATCH 5.15 075/247] net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 02ded5a173619b11728b8bf75a3fd995a2c1ff28 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.

mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register().
We don't need the device node after it.

Add missing of_node_put() to avoid refcount leak.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 0830d7bb7a00..f9efd0c8bab8 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3492,6 +3492,7 @@ static int mv88e6xxx_mdios_register(struct mv88e6xxx_chip *chip,
 	 */
 	child = of_get_child_by_name(np, "mdio");
 	err = mv88e6xxx_mdio_register(chip, child, false);
+	of_node_put(child);
 	if (err)
 		return err;
 
-- 
2.35.1

[PATCH 5.15 076/247] modpost: fix removing numeric suffixes

[Greg Kroah-Hartman]

From: Alexander Lobakin <alexandr.lobakin@intel.com>

[ Upstream commit b5beffa20d83c4e15306c991ffd00de0d8628338 ]

With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:

ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL

The reason is that for now the condition from remove_dot():

if (m && (s[n + m] == '.' || s[n + m] == 0))

which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):

param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'

So it's off-by-one and was like that since 2014.

Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.

Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mod/modpost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index ca491aa2b376..7a5bddb8913e 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1971,7 +1971,7 @@ static char *remove_dot(char *s)
 
 	if (n && s[n]) {
 		size_t m = strspn(s + n + 1, "0123456789");
-		if (m && (s[n + m] == '.' || s[n + m] == 0))
+		if (m && (s[n + m + 1] == '.' || s[n + m + 1] == 0))
 			s[n] = 0;
 
 		/* strip trailing .lto */
-- 
2.35.1

[PATCH 5.15 077/247] jffs2: fix memory leak in jffs2_do_fill_super

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit c14adb1cf70a984ed081c67e9d27bc3caad9537c ]

If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns
an error, we can observe the following kmemleak report:

--------------------------------------------
unreferenced object 0xffff888105a65340 (size 64):
  comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0
    [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0
    [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
    [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
    [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
    [...]
unreferenced object 0xffff8881bd7f0000 (size 65536):
  comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
  hex dump (first 32 bytes):
    bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
    bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  backtrace:
    [<ffffffff858579ba>] kmalloc_order+0xda/0x110
    [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130
    [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0
    [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0
    [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
    [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
    [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
    [...]
--------------------------------------------

This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.

Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/fs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 71f03a5d36ed..f83a468b6488 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -604,6 +604,7 @@ int jffs2_do_fill_super(struct super_block *sb, struct fs_context *fc)
 	jffs2_free_raw_node_refs(c);
 	kvfree(c->blocks);
 	jffs2_clear_xattr_subsystem(c);
+	jffs2_sum_exit(c);
  out_inohash:
 	kfree(c->inocache_list);
  out_wbuf:
-- 
2.35.1

[PATCH 5.15 078/247] ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit d09e9a2bddba6c48e0fddb16c4383172ac593251 ]

There at least 6 PEBs reserved on UBI device:
1. EBA_RESERVED_PEBS[1]
2. WL_RESERVED_PEBS[1]
3. UBI_LAYOUT_VOLUME_EBS[2]
4. MIN_FASTMAP_RESERVED_PEBS[2]

When all ubi volumes take all their PEBs, there are 3 (EBA_RESERVED_PEBS +
WL_RESERVED_PEBS + MIN_FASTMAP_RESERVED_PEBS - MIN_FASTMAP_TAKEN_PEBS[1])
free PEBs. Since commit f9c34bb529975fe ("ubi: Fix producing anchor PEBs")
and commit 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs considering
wear level rules") applied, there is only 1 (3 - FASTMAP_ANCHOR_PEBS[1] -
FASTMAP_NEXT_ANCHOR_PEBS[1]) free PEB to fill pool and wl_pool, after
filling pool, wl_pool is always empty. So, UBI could be stuck in an
infinite loop:

	ubi_thread	   system_wq
wear_leveling_worker <--------------------------------------------------
  get_peb_for_wl							|
    // fm_wl_pool, used = size = 0					|
    schedule_work(&ubi->fm_work)					|
									|
		    update_fastmap_work_fn				|
		      ubi_update_fastmap				|
			ubi_refill_pools				|
			// ubi->free_count - ubi->beb_rsvd_pebs < 5	|
			// wl_pool is not filled with any PEBs		|
			schedule_erase(old_fm_anchor)			|
			ubi_ensure_anchor_pebs				|
			  __schedule_ubi_work(wear_leveling_worker)	|
									|
__erase_worker								|
  ensure_wear_leveling							|
    __schedule_ubi_work(wear_leveling_worker) --------------------------

, which cause high cpu usage of ubi_bgt:
top - 12:10:42 up 5 min,  2 users,  load average: 1.76, 0.68, 0.27
Tasks: 123 total,   3 running,  54 sleeping,   0 stopped,   0 zombie

  PID USER PR   NI VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND
 1589 root 20   0   0      0      0 R  45.0  0.0   0:38.86 ubi_bgt0d
  319 root 20   0   0      0      0 I  15.2  0.0   0:15.29 kworker/0:3-eve
  371 root 20   0   0      0      0 I  14.9  0.0   0:12.85 kworker/3:3-eve
   20 root 20   0   0      0      0 I  11.3  0.0   0:05.33 kworker/1:0-eve
  202 root 20   0   0      0      0 I  11.3  0.0   0:04.93 kworker/2:3-eve

In commit 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs considering
wear level rules"), there are three key changes:
  1) Choose the fastmap anchor when the most free PEBs are available.
  2) Enable anchor move within the anchor area again as it is useful
     for distributing wear.
  3) Import a candidate fm anchor and check this PEB's erase count during
     wear leveling. If the wear leveling limit is exceeded, use the used
     anchor area PEB with the lowest erase count to replace it.

The anchor candidate can be removed, we can check fm_anchor PEB's erase
count during wear leveling. Fix it by:
  1) Removing 'fm_next_anchor' and check 'fm_anchor' during wear leveling.
  2) Preferentially filling one free peb into fm_wl_pool in condition of
     ubi->free_count > ubi->beb_rsvd_pebs, then try to reserve enough
     free count for fastmap non anchor pebs after the above prerequisites
     are met.
Then, there are at least 1 PEB in pool and 1 PEB in wl_pool after calling
ubi_refill_pools() with all erase works done.

Fetch a reproducer in [Link].

Fixes: 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs ... rules")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215407
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/ubi/fastmap-wl.c | 69 ++++++++++++++++++++++++------------
 drivers/mtd/ubi/fastmap.c    | 11 ------
 drivers/mtd/ubi/ubi.h        |  4 +--
 drivers/mtd/ubi/wl.c         | 19 +++++-----
 4 files changed, 57 insertions(+), 46 deletions(-)

diff --git a/drivers/mtd/ubi/fastmap-wl.c b/drivers/mtd/ubi/fastmap-wl.c
index 28f55f9cf715..053ab52668e8 100644
--- a/drivers/mtd/ubi/fastmap-wl.c
+++ b/drivers/mtd/ubi/fastmap-wl.c
@@ -97,6 +97,33 @@ struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor)
 	return e;
 }
 
+/*
+ * has_enough_free_count - whether ubi has enough free pebs to fill fm pools
+ * @ubi: UBI device description object
+ * @is_wl_pool: whether UBI is filling wear leveling pool
+ *
+ * This helper function checks whether there are enough free pebs (deducted
+ * by fastmap pebs) to fill fm_pool and fm_wl_pool, above rule works after
+ * there is at least one of free pebs is filled into fm_wl_pool.
+ * For wear leveling pool, UBI should also reserve free pebs for bad pebs
+ * handling, because there maybe no enough free pebs for user volumes after
+ * producing new bad pebs.
+ */
+static bool has_enough_free_count(struct ubi_device *ubi, bool is_wl_pool)
+{
+	int fm_used = 0;	// fastmap non anchor pebs.
+	int beb_rsvd_pebs;
+
+	if (!ubi->free.rb_node)
+		return false;
+
+	beb_rsvd_pebs = is_wl_pool ? ubi->beb_rsvd_pebs : 0;
+	if (ubi->fm_wl_pool.size > 0 && !(ubi->ro_mode || ubi->fm_disabled))
+		fm_used = ubi->fm_size / ubi->leb_size - 1;
+
+	return ubi->free_count - beb_rsvd_pebs > fm_used;
+}
+
 /**
  * ubi_refill_pools - refills all fastmap PEB pools.
  * @ubi: UBI device description object
@@ -120,21 +147,17 @@ void ubi_refill_pools(struct ubi_device *ubi)
 		wl_tree_add(ubi->fm_anchor, &ubi->free);
 		ubi->free_count++;
 	}
-	if (ubi->fm_next_anchor) {
-		wl_tree_add(ubi->fm_next_anchor, &ubi->free);
-		ubi->free_count++;
-	}
 
-	/* All available PEBs are in ubi->free, now is the time to get
+	/*
+	 * All available PEBs are in ubi->free, now is the time to get
 	 * the best anchor PEBs.
 	 */
 	ubi->fm_anchor = ubi_wl_get_fm_peb(ubi, 1);
-	ubi->fm_next_anchor = ubi_wl_get_fm_peb(ubi, 1);
 
 	for (;;) {
 		enough = 0;
 		if (pool->size < pool->max_size) {
-			if (!ubi->free.rb_node)
+			if (!has_enough_free_count(ubi, false))
 				break;
 
 			e = wl_get_wle(ubi);
@@ -147,8 +170,7 @@ void ubi_refill_pools(struct ubi_device *ubi)
 			enough++;
 
 		if (wl_pool->size < wl_pool->max_size) {
-			if (!ubi->free.rb_node ||
-			   (ubi->free_count - ubi->beb_rsvd_pebs < 5))
+			if (!has_enough_free_count(ubi, true))
 				break;
 
 			e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
@@ -286,20 +308,26 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
 int ubi_ensure_anchor_pebs(struct ubi_device *ubi)
 {
 	struct ubi_work *wrk;
+	struct ubi_wl_entry *anchor;
 
 	spin_lock(&ubi->wl_lock);
 
-	/* Do we have a next anchor? */
-	if (!ubi->fm_next_anchor) {
-		ubi->fm_next_anchor = ubi_wl_get_fm_peb(ubi, 1);
-		if (!ubi->fm_next_anchor)
-			/* Tell wear leveling to produce a new anchor PEB */
-			ubi->fm_do_produce_anchor = 1;
+	/* Do we already have an anchor? */
+	if (ubi->fm_anchor) {
+		spin_unlock(&ubi->wl_lock);
+		return 0;
 	}
 
-	/* Do wear leveling to get a new anchor PEB or check the
-	 * existing next anchor candidate.
-	 */
+	/* See if we can find an anchor PEB on the list of free PEBs */
+	anchor = ubi_wl_get_fm_peb(ubi, 1);
+	if (anchor) {
+		ubi->fm_anchor = anchor;
+		spin_unlock(&ubi->wl_lock);
+		return 0;
+	}
+
+	ubi->fm_do_produce_anchor = 1;
+	/* No luck, trigger wear leveling to produce a new anchor PEB. */
 	if (ubi->wl_scheduled) {
 		spin_unlock(&ubi->wl_lock);
 		return 0;
@@ -381,11 +409,6 @@ static void ubi_fastmap_close(struct ubi_device *ubi)
 		ubi->fm_anchor = NULL;
 	}
 
-	if (ubi->fm_next_anchor) {
-		return_unused_peb(ubi, ubi->fm_next_anchor);
-		ubi->fm_next_anchor = NULL;
-	}
-
 	if (ubi->fm) {
 		for (i = 0; i < ubi->fm->used_blocks; i++)
 			kfree(ubi->fm->e[i]);
diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
index 6b5f1ffd961b..6e95c4b1473e 100644
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -1230,17 +1230,6 @@ static int ubi_write_fastmap(struct ubi_device *ubi,
 		fm_pos += sizeof(*fec);
 		ubi_assert(fm_pos <= ubi->fm_size);
 	}
-	if (ubi->fm_next_anchor) {
-		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
-
-		fec->pnum = cpu_to_be32(ubi->fm_next_anchor->pnum);
-		set_seen(ubi, ubi->fm_next_anchor->pnum, seen_pebs);
-		fec->ec = cpu_to_be32(ubi->fm_next_anchor->ec);
-
-		free_peb_count++;
-		fm_pos += sizeof(*fec);
-		ubi_assert(fm_pos <= ubi->fm_size);
-	}
 	fmh->free_peb_count = cpu_to_be32(free_peb_count);
 
 	ubi_for_each_used_peb(ubi, wl_e, tmp_rb) {
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 7c083ad58274..078112e23dfd 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -489,8 +489,7 @@ struct ubi_debug_info {
  * @fm_work: fastmap work queue
  * @fm_work_scheduled: non-zero if fastmap work was scheduled
  * @fast_attach: non-zero if UBI was attached by fastmap
- * @fm_anchor: The new anchor PEB used during fastmap update
- * @fm_next_anchor: An anchor PEB candidate for the next time fastmap is updated
+ * @fm_anchor: The next anchor PEB to use for fastmap
  * @fm_do_produce_anchor: If true produce an anchor PEB in wl
  *
  * @used: RB-tree of used physical eraseblocks
@@ -601,7 +600,6 @@ struct ubi_device {
 	int fm_work_scheduled;
 	int fast_attach;
 	struct ubi_wl_entry *fm_anchor;
-	struct ubi_wl_entry *fm_next_anchor;
 	int fm_do_produce_anchor;
 
 	/* Wear-leveling sub-system's stuff */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 8455f1d47f3c..afcdacb9d0e9 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -689,16 +689,16 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 
 #ifdef CONFIG_MTD_UBI_FASTMAP
 	e1 = find_anchor_wl_entry(&ubi->used);
-	if (e1 && ubi->fm_next_anchor &&
-	    (ubi->fm_next_anchor->ec - e1->ec >= UBI_WL_THRESHOLD)) {
+	if (e1 && ubi->fm_anchor &&
+	    (ubi->fm_anchor->ec - e1->ec >= UBI_WL_THRESHOLD)) {
 		ubi->fm_do_produce_anchor = 1;
-		/* fm_next_anchor is no longer considered a good anchor
-		 * candidate.
+		/*
+		 * fm_anchor is no longer considered a good anchor.
 		 * NULL assignment also prevents multiple wear level checks
 		 * of this PEB.
 		 */
-		wl_tree_add(ubi->fm_next_anchor, &ubi->free);
-		ubi->fm_next_anchor = NULL;
+		wl_tree_add(ubi->fm_anchor, &ubi->free);
+		ubi->fm_anchor = NULL;
 		ubi->free_count++;
 	}
 
@@ -1085,12 +1085,13 @@ static int __erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk)
 	if (!err) {
 		spin_lock(&ubi->wl_lock);
 
-		if (!ubi->fm_disabled && !ubi->fm_next_anchor &&
+		if (!ubi->fm_disabled && !ubi->fm_anchor &&
 		    e->pnum < UBI_FM_MAX_START) {
-			/* Abort anchor production, if needed it will be
+			/*
+			 * Abort anchor production, if needed it will be
 			 * enabled again in the wear leveling started below.
 			 */
-			ubi->fm_next_anchor = e;
+			ubi->fm_anchor = e;
 			ubi->fm_do_produce_anchor = 0;
 		} else {
 			wl_tree_add(e, &ubi->free);
-- 
2.35.1

[PATCH 5.15 079/247] ubi: ubi_create_volume: Fix use-after-free when volume creation failed

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

[ Upstream commit 8c03a1c21d72210f81cb369cc528e3fde4b45411 ]

There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s
error handling path:

  ubi_eba_replace_table(vol, eba_tbl)
    vol->eba_tbl = tbl
out_mapping:
  ubi_eba_destroy_table(eba_tbl)   // Free 'eba_tbl'
out_unlock:
  put_device(&vol->dev)
    vol_release
      kfree(tbl->entries)	  // UAF

Fix it by removing redundant 'eba_tbl' releasing.
Fetch a reproducer in [Link].

Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/ubi/vmt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 1bc7b3a05604..6ea95ade4ca6 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -309,7 +309,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	ubi->volumes[vol_id] = NULL;
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
-	ubi_eba_destroy_table(eba_tbl);
 out_acc:
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= vol->reserved_pebs;
-- 
2.35.1

[PATCH 5.15 080/247] selftests/bpf: fix selftest after random: Urandom_read tracepoint removal

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 99dea2c664d7bc7e4f6f6947182d0d365165a998 ]

14c174633f34 ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.

Fix breakage by switching to kprobing urandom_read() function.

Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/progs/test_stacktrace_build_id.c   | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c b/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
index 0cf0134631b4..08aee18d9ded 100644
--- a/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
+++ b/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
@@ -39,16 +39,8 @@ struct {
 	__type(value, stack_trace_t);
 } stack_amap SEC(".maps");
 
-/* taken from /sys/kernel/debug/tracing/events/random/urandom_read/format */
-struct random_urandom_args {
-	unsigned long long pad;
-	int got_bits;
-	int pool_left;
-	int input_left;
-};
-
-SEC("tracepoint/random/urandom_read")
-int oncpu(struct random_urandom_args *args)
+SEC("kprobe/urandom_read")
+int oncpu(struct pt_regs *args)
 {
 	__u32 max_len = sizeof(struct bpf_stack_build_id)
 			* PERF_MAX_STACK_DEPTH;
-- 
2.35.1

[PATCH 5.15 081/247] selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_read

[Greg Kroah-Hartman]

From: Song Liu <song@kernel.org>

[ Upstream commit 59ed76fe2f981bccde37bdddb465f260a96a2404 ]

Kernel function urandom_read is replaced with urandom_read_iter.
Therefore, kprobe on urandom_read is not working any more:

[root@eth50-1 bpf]# ./test_progs -n 161
test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec
libbpf: kprobe perf_event_open() failed: No such file or directory
libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \
        perf event: No such file or directory
libbpf: prog 'oncpu': failed to auto-attach: -2
test_stacktrace_build_id:FAIL:attach_tp err -2
161     stacktrace_build_id:FAIL

Fix this by replacing urandom_read with urandom_read_iter in the test.

Fixes: 1b388e7765f2 ("random: convert to using fops->read_iter()")
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c b/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
index 08aee18d9ded..58fbe22a3bf8 100644
--- a/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
+++ b/tools/testing/selftests/bpf/progs/test_stacktrace_build_id.c
@@ -39,7 +39,7 @@ struct {
 	__type(value, stack_trace_t);
 } stack_amap SEC(".maps");
 
-SEC("kprobe/urandom_read")
+SEC("kprobe/urandom_read_iter")
 int oncpu(struct pt_regs *args)
 {
 	__u32 max_len = sizeof(struct bpf_stack_build_id)
-- 
2.35.1

[PATCH 5.15 082/247] bpf: Fix probe read error in ___bpf_prog_run()

[Greg Kroah-Hartman]

From: Menglong Dong <imagedong@tencent.com>

[ Upstream commit caff1fa4118cec4dfd4336521ebd22a6408a1e3e ]

I think there is something wrong with BPF_PROBE_MEM in ___bpf_prog_run()
in big-endian machine. Let's make a test and see what will happen if we
want to load a 'u16' with BPF_PROBE_MEM.

Let's make the src value '0x0001', the value of dest register will become
0x0001000000000000, as the value will be loaded to the first 2 byte of
DST with following code:

  bpf_probe_read_kernel(&DST, SIZE, (const void *)(long) (SRC + insn->off));

Obviously, the value in DST is not correct. In fact, we can compare
BPF_PROBE_MEM with LDX_MEM_H:

  DST = *(SIZE *)(unsigned long) (SRC + insn->off);

If the memory load is done by LDX_MEM_H, the value in DST will be 0x1 now.

And I think this error results in the test case 'test_bpf_sk_storage_map'
failing:

  test_bpf_sk_storage_map:PASS:bpf_iter_bpf_sk_storage_map__open_and_load 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:attach_iter 0 nsec
  test_bpf_sk_storage_map:PASS:create_iter 0 nsec
  test_bpf_sk_storage_map:PASS:read 0 nsec
  test_bpf_sk_storage_map:FAIL:ipv6_sk_count got 0 expected 3
  $10/26 bpf_iter/bpf_sk_storage_map:FAIL

The code of the test case is simply, it will load sk->sk_family to the
register with BPF_PROBE_MEM and check if it is AF_INET6. With this patch,
now the test case 'bpf_iter' can pass:

  $10  bpf_iter:OK

Fixes: 2a02759ef5f8 ("bpf: Add support for BTF pointers to interpreter")
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220524021228.533216-1-imagedong@tencent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 6e3ae90ad107..48eb9c329da6 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1652,6 +1652,11 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn)
 		CONT;							\
 	LDX_MEM_##SIZEOP:						\
 		DST = *(SIZE *)(unsigned long) (SRC + insn->off);	\
+		CONT;							\
+	LDX_PROBE_MEM_##SIZEOP:						\
+		bpf_probe_read_kernel(&DST, sizeof(SIZE),		\
+				      (const void *)(long) (SRC + insn->off));	\
+		DST = *((SIZE *)&DST);					\
 		CONT;
 
 	LDST(B,   u8)
@@ -1659,15 +1664,6 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn)
 	LDST(W,  u32)
 	LDST(DW, u64)
 #undef LDST
-#define LDX_PROBE(SIZEOP, SIZE)							\
-	LDX_PROBE_MEM_##SIZEOP:							\
-		bpf_probe_read_kernel(&DST, SIZE, (const void *)(long) (SRC + insn->off));	\
-		CONT;
-	LDX_PROBE(B,  1)
-	LDX_PROBE(H,  2)
-	LDX_PROBE(W,  4)
-	LDX_PROBE(DW, 8)
-#undef LDX_PROBE
 
 #define ATOMIC_ALU_OP(BOP, KOP)						\
 		case BOP:						\
-- 
2.35.1

[PATCH 5.15 083/247] block: take destination bvec offsets into account in bio_copy_data_iter

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 403d50341cce6b5481a92eb481e6df60b1f49b55 ]

Appartly bcache can copy into bios that do not just contain fresh
pages but can have offsets into the bio_vecs.  Restore support for tht
in bio_copy_data_iter.

Fixes: f8b679a070c5 ("block: rewrite bio_copy_data_iter to use bvec_kmap_local and memcpy_to_bvec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220524143919.1155501-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bio.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/block/bio.c b/block/bio.c
index 8906c9856a7d..9b28381412d2 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1289,10 +1289,12 @@ void bio_copy_data_iter(struct bio *dst, struct bvec_iter *dst_iter,
 		struct bio_vec src_bv = bio_iter_iovec(src, *src_iter);
 		struct bio_vec dst_bv = bio_iter_iovec(dst, *dst_iter);
 		unsigned int bytes = min(src_bv.bv_len, dst_bv.bv_len);
-		void *src_buf;
+		void *src_buf = bvec_kmap_local(&src_bv);
+		void *dst_buf = bvec_kmap_local(&dst_bv);
 
-		src_buf = bvec_kmap_local(&src_bv);
-		memcpy_to_bvec(&dst_bv, src_buf);
+		memcpy(dst_buf, src_buf, bytes);
+
+		kunmap_local(dst_buf);
 		kunmap_local(src_buf);
 
 		bio_advance_iter_single(src, src_iter, bytes);
-- 
2.35.1

[PATCH 5.15 084/247] riscv: read-only pages should not be writable

[Greg Kroah-Hartman]

From: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

[ Upstream commit 630f972d76d6460235e84e1aa034ee06f9c8c3a9 ]

If EFI pages are marked as read-only,
we should remove the _PAGE_WRITE flag.

The current code overwrites an unused value.

Fixes: b91540d52a08b ("RISC-V: Add EFI runtime services")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220528014132.91052-1-heinrich.schuchardt@canonical.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/efi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/efi.c b/arch/riscv/kernel/efi.c
index 024159298231..1aa540350abd 100644
--- a/arch/riscv/kernel/efi.c
+++ b/arch/riscv/kernel/efi.c
@@ -65,7 +65,7 @@ static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 
 	if (md->attribute & EFI_MEMORY_RO) {
 		val = pte_val(pte) & ~_PAGE_WRITE;
-		val = pte_val(pte) | _PAGE_READ;
+		val |= _PAGE_READ;
 		pte = __pte(val);
 	}
 	if (md->attribute & EFI_MEMORY_XP) {
-- 
2.35.1

[PATCH 5.15 085/247] net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct smc_wr_tx_pend_priv *"

[Greg Kroah-Hartman]

From: Guangguan Wang <guangguan.wang@linux.alibaba.com>

[ Upstream commit e225c9a5a74b12e9ef8516f30a3db2c7eb866ee1 ]

"struct smc_cdc_tx_pend **" can not directly convert
to "struct smc_wr_tx_pend_priv *".

Fixes: 2bced6aefa3d ("net/smc: put slot when connection is killed")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_cdc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c
index 84c8a4374fdd..5d180d24cbf1 100644
--- a/net/smc/smc_cdc.c
+++ b/net/smc/smc_cdc.c
@@ -72,7 +72,7 @@ int smc_cdc_get_free_slot(struct smc_connection *conn,
 		/* abnormal termination */
 		if (!rc)
 			smc_wr_tx_put_slot(link,
-					   (struct smc_wr_tx_pend_priv *)pend);
+					   (struct smc_wr_tx_pend_priv *)(*pend));
 		rc = -EPIPE;
 	}
 	return rc;
-- 
2.35.1

[PATCH 5.15 086/247] tcp: add accessors to read/set tp->snd_cwnd

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 40570375356c874b1578e05c1dcc3ff7c1322dbe ]

We had various bugs over the years with code
breaking the assumption that tp->snd_cwnd is greater
than zero.

Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added
in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction")
can trigger, and without a repro we would have to spend
considerable time finding the bug.

Instead of complaining too late, we want to catch where
and when tp->snd_cwnd is set to an illegal value.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/tcp.h          | 19 +++++++++++++++----
 include/trace/events/tcp.h |  2 +-
 net/core/filter.c          |  2 +-
 net/ipv4/tcp.c             |  8 ++++----
 net/ipv4/tcp_bbr.c         | 20 ++++++++++----------
 net/ipv4/tcp_bic.c         | 14 +++++++-------
 net/ipv4/tcp_cdg.c         | 30 +++++++++++++++---------------
 net/ipv4/tcp_cong.c        | 18 +++++++++---------
 net/ipv4/tcp_cubic.c       | 22 +++++++++++-----------
 net/ipv4/tcp_dctcp.c       | 11 ++++++-----
 net/ipv4/tcp_highspeed.c   | 18 +++++++++---------
 net/ipv4/tcp_htcp.c        | 10 +++++-----
 net/ipv4/tcp_hybla.c       | 18 +++++++++---------
 net/ipv4/tcp_illinois.c    | 12 +++++++-----
 net/ipv4/tcp_input.c       | 36 ++++++++++++++++++------------------
 net/ipv4/tcp_ipv4.c        |  2 +-
 net/ipv4/tcp_lp.c          |  6 +++---
 net/ipv4/tcp_metrics.c     | 12 ++++++------
 net/ipv4/tcp_nv.c          | 24 ++++++++++++------------
 net/ipv4/tcp_output.c      | 30 +++++++++++++++---------------
 net/ipv4/tcp_rate.c        |  2 +-
 net/ipv4/tcp_scalable.c    |  4 ++--
 net/ipv4/tcp_vegas.c       | 21 +++++++++++----------
 net/ipv4/tcp_veno.c        | 24 ++++++++++++------------
 net/ipv4/tcp_westwood.c    |  3 ++-
 net/ipv4/tcp_yeah.c        | 30 +++++++++++++++---------------
 net/ipv6/tcp_ipv6.c        |  2 +-
 27 files changed, 208 insertions(+), 192 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 91ac329ca578..3b97db2d438f 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1199,9 +1199,20 @@ static inline unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
 
 #define TCP_INFINITE_SSTHRESH	0x7fffffff
 
+static inline u32 tcp_snd_cwnd(const struct tcp_sock *tp)
+{
+	return tp->snd_cwnd;
+}
+
+static inline void tcp_snd_cwnd_set(struct tcp_sock *tp, u32 val)
+{
+	WARN_ON_ONCE((int)val <= 0);
+	tp->snd_cwnd = val;
+}
+
 static inline bool tcp_in_slow_start(const struct tcp_sock *tp)
 {
-	return tp->snd_cwnd < tp->snd_ssthresh;
+	return tcp_snd_cwnd(tp) < tp->snd_ssthresh;
 }
 
 static inline bool tcp_in_initial_slowstart(const struct tcp_sock *tp)
@@ -1227,8 +1238,8 @@ static inline __u32 tcp_current_ssthresh(const struct sock *sk)
 		return tp->snd_ssthresh;
 	else
 		return max(tp->snd_ssthresh,
-			   ((tp->snd_cwnd >> 1) +
-			    (tp->snd_cwnd >> 2)));
+			   ((tcp_snd_cwnd(tp) >> 1) +
+			    (tcp_snd_cwnd(tp) >> 2)));
 }
 
 /* Use define here intentionally to get WARN_ON location shown at the caller */
@@ -1270,7 +1281,7 @@ static inline bool tcp_is_cwnd_limited(const struct sock *sk)
 
 	/* If in slow start, ensure cwnd grows to twice what was ACKed. */
 	if (tcp_in_slow_start(tp))
-		return tp->snd_cwnd < 2 * tp->max_packets_out;
+		return tcp_snd_cwnd(tp) < 2 * tp->max_packets_out;
 
 	return tp->is_cwnd_limited;
 }
diff --git a/include/trace/events/tcp.h b/include/trace/events/tcp.h
index 521059d8dc0a..edcd6369de10 100644
--- a/include/trace/events/tcp.h
+++ b/include/trace/events/tcp.h
@@ -279,7 +279,7 @@ TRACE_EVENT(tcp_probe,
 		__entry->data_len = skb->len - __tcp_hdrlen(th);
 		__entry->snd_nxt = tp->snd_nxt;
 		__entry->snd_una = tp->snd_una;
-		__entry->snd_cwnd = tp->snd_cwnd;
+		__entry->snd_cwnd = tcp_snd_cwnd(tp);
 		__entry->snd_wnd = tp->snd_wnd;
 		__entry->rcv_wnd = tp->rcv_wnd;
 		__entry->ssthresh = tcp_current_ssthresh(sk);
diff --git a/net/core/filter.c b/net/core/filter.c
index 707e2e48d769..0816468c545c 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4885,7 +4885,7 @@ static int _bpf_setsockopt(struct sock *sk, int level, int optname,
 				if (val <= 0 || tp->data_segs_out > tp->syn_data)
 					ret = -EINVAL;
 				else
-					tp->snd_cwnd = val;
+					tcp_snd_cwnd_set(tp, val);
 				break;
 			case TCP_BPF_SNDCWND_CLAMP:
 				if (val <= 0) {
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ef68d55e0944..f79b5a98888c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -435,7 +435,7 @@ void tcp_init_sock(struct sock *sk)
 	 * algorithms that we must have the following bandaid to talk
 	 * efficiently to them.  -DaveM
 	 */
-	tp->snd_cwnd = TCP_INIT_CWND;
+	tcp_snd_cwnd_set(tp, TCP_INIT_CWND);
 
 	/* There's a bubble in the pipe until at least the first ACK. */
 	tp->app_limited = ~0U;
@@ -3021,7 +3021,7 @@ int tcp_disconnect(struct sock *sk, int flags)
 	icsk->icsk_rto_min = TCP_RTO_MIN;
 	icsk->icsk_delack_max = TCP_DELACK_MAX;
 	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
-	tp->snd_cwnd = TCP_INIT_CWND;
+	tcp_snd_cwnd_set(tp, TCP_INIT_CWND);
 	tp->snd_cwnd_cnt = 0;
 	tp->window_clamp = 0;
 	tp->delivered = 0;
@@ -3732,7 +3732,7 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info)
 	info->tcpi_max_pacing_rate = rate64;
 
 	info->tcpi_reordering = tp->reordering;
-	info->tcpi_snd_cwnd = tp->snd_cwnd;
+	info->tcpi_snd_cwnd = tcp_snd_cwnd(tp);
 
 	if (info->tcpi_state == TCP_LISTEN) {
 		/* listeners aliased fields :
@@ -3901,7 +3901,7 @@ struct sk_buff *tcp_get_timestamping_opt_stats(const struct sock *sk,
 	rate64 = tcp_compute_delivery_rate(tp);
 	nla_put_u64_64bit(stats, TCP_NLA_DELIVERY_RATE, rate64, TCP_NLA_PAD);
 
-	nla_put_u32(stats, TCP_NLA_SND_CWND, tp->snd_cwnd);
+	nla_put_u32(stats, TCP_NLA_SND_CWND, tcp_snd_cwnd(tp));
 	nla_put_u32(stats, TCP_NLA_REORDERING, tp->reordering);
 	nla_put_u32(stats, TCP_NLA_MIN_RTT, tcp_min_rtt(tp));
 
diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c
index 6274462b86b4..c5ee83654db1 100644
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -274,7 +274,7 @@ static void bbr_init_pacing_rate_from_rtt(struct sock *sk)
 	} else {			 /* no RTT sample yet */
 		rtt_us = USEC_PER_MSEC;	 /* use nominal default RTT */
 	}
-	bw = (u64)tp->snd_cwnd * BW_UNIT;
+	bw = (u64)tcp_snd_cwnd(tp) * BW_UNIT;
 	do_div(bw, rtt_us);
 	sk->sk_pacing_rate = bbr_bw_to_pacing_rate(sk, bw, bbr_high_gain);
 }
@@ -321,9 +321,9 @@ static void bbr_save_cwnd(struct sock *sk)
 	struct bbr *bbr = inet_csk_ca(sk);
 
 	if (bbr->prev_ca_state < TCP_CA_Recovery && bbr->mode != BBR_PROBE_RTT)
-		bbr->prior_cwnd = tp->snd_cwnd;  /* this cwnd is good enough */
+		bbr->prior_cwnd = tcp_snd_cwnd(tp);  /* this cwnd is good enough */
 	else  /* loss recovery or BBR_PROBE_RTT have temporarily cut cwnd */
-		bbr->prior_cwnd = max(bbr->prior_cwnd, tp->snd_cwnd);
+		bbr->prior_cwnd = max(bbr->prior_cwnd, tcp_snd_cwnd(tp));
 }
 
 static void bbr_cwnd_event(struct sock *sk, enum tcp_ca_event event)
@@ -480,7 +480,7 @@ static bool bbr_set_cwnd_to_recover_or_restore(
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct bbr *bbr = inet_csk_ca(sk);
 	u8 prev_state = bbr->prev_ca_state, state = inet_csk(sk)->icsk_ca_state;
-	u32 cwnd = tp->snd_cwnd;
+	u32 cwnd = tcp_snd_cwnd(tp);
 
 	/* An ACK for P pkts should release at most 2*P packets. We do this
 	 * in two steps. First, here we deduct the number of lost packets.
@@ -518,7 +518,7 @@ static void bbr_set_cwnd(struct sock *sk, const struct rate_sample *rs,
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct bbr *bbr = inet_csk_ca(sk);
-	u32 cwnd = tp->snd_cwnd, target_cwnd = 0;
+	u32 cwnd = tcp_snd_cwnd(tp), target_cwnd = 0;
 
 	if (!acked)
 		goto done;  /* no packet fully ACKed; just apply caps */
@@ -542,9 +542,9 @@ static void bbr_set_cwnd(struct sock *sk, const struct rate_sample *rs,
 	cwnd = max(cwnd, bbr_cwnd_min_target);
 
 done:
-	tp->snd_cwnd = min(cwnd, tp->snd_cwnd_clamp);	/* apply global cap */
+	tcp_snd_cwnd_set(tp, min(cwnd, tp->snd_cwnd_clamp));	/* apply global cap */
 	if (bbr->mode == BBR_PROBE_RTT)  /* drain queue, refresh min_rtt */
-		tp->snd_cwnd = min(tp->snd_cwnd, bbr_cwnd_min_target);
+		tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp), bbr_cwnd_min_target));
 }
 
 /* End cycle phase if it's time and/or we hit the phase's in-flight target. */
@@ -854,7 +854,7 @@ static void bbr_update_ack_aggregation(struct sock *sk,
 	bbr->ack_epoch_acked = min_t(u32, 0xFFFFF,
 				     bbr->ack_epoch_acked + rs->acked_sacked);
 	extra_acked = bbr->ack_epoch_acked - expected_acked;
-	extra_acked = min(extra_acked, tp->snd_cwnd);
+	extra_acked = min(extra_acked, tcp_snd_cwnd(tp));
 	if (extra_acked > bbr->extra_acked[bbr->extra_acked_win_idx])
 		bbr->extra_acked[bbr->extra_acked_win_idx] = extra_acked;
 }
@@ -912,7 +912,7 @@ static void bbr_check_probe_rtt_done(struct sock *sk)
 		return;
 
 	bbr->min_rtt_stamp = tcp_jiffies32;  /* wait a while until PROBE_RTT */
-	tp->snd_cwnd = max(tp->snd_cwnd, bbr->prior_cwnd);
+	tcp_snd_cwnd_set(tp, max(tcp_snd_cwnd(tp), bbr->prior_cwnd));
 	bbr_reset_mode(sk);
 }
 
@@ -1091,7 +1091,7 @@ static u32 bbr_undo_cwnd(struct sock *sk)
 	bbr->full_bw = 0;   /* spurious slow-down; reset full pipe detection */
 	bbr->full_bw_cnt = 0;
 	bbr_reset_lt_bw_sampling(sk);
-	return tcp_sk(sk)->snd_cwnd;
+	return tcp_snd_cwnd(tcp_sk(sk));
 }
 
 /* Entering loss recovery, so save cwnd for when we exit or undo recovery. */
diff --git a/net/ipv4/tcp_bic.c b/net/ipv4/tcp_bic.c
index f5f588b1f6e9..58358bf92e1b 100644
--- a/net/ipv4/tcp_bic.c
+++ b/net/ipv4/tcp_bic.c
@@ -150,7 +150,7 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		if (!acked)
 			return;
 	}
-	bictcp_update(ca, tp->snd_cwnd);
+	bictcp_update(ca, tcp_snd_cwnd(tp));
 	tcp_cong_avoid_ai(tp, ca->cnt, acked);
 }
 
@@ -166,16 +166,16 @@ static u32 bictcp_recalc_ssthresh(struct sock *sk)
 	ca->epoch_start = 0;	/* end of epoch */
 
 	/* Wmax and fast convergence */
-	if (tp->snd_cwnd < ca->last_max_cwnd && fast_convergence)
-		ca->last_max_cwnd = (tp->snd_cwnd * (BICTCP_BETA_SCALE + beta))
+	if (tcp_snd_cwnd(tp) < ca->last_max_cwnd && fast_convergence)
+		ca->last_max_cwnd = (tcp_snd_cwnd(tp) * (BICTCP_BETA_SCALE + beta))
 			/ (2 * BICTCP_BETA_SCALE);
 	else
-		ca->last_max_cwnd = tp->snd_cwnd;
+		ca->last_max_cwnd = tcp_snd_cwnd(tp);
 
-	if (tp->snd_cwnd <= low_window)
-		return max(tp->snd_cwnd >> 1U, 2U);
+	if (tcp_snd_cwnd(tp) <= low_window)
+		return max(tcp_snd_cwnd(tp) >> 1U, 2U);
 	else
-		return max((tp->snd_cwnd * beta) / BICTCP_BETA_SCALE, 2U);
+		return max((tcp_snd_cwnd(tp) * beta) / BICTCP_BETA_SCALE, 2U);
 }
 
 static void bictcp_state(struct sock *sk, u8 new_state)
diff --git a/net/ipv4/tcp_cdg.c b/net/ipv4/tcp_cdg.c
index 709d23801823..ddc7ba0554bd 100644
--- a/net/ipv4/tcp_cdg.c
+++ b/net/ipv4/tcp_cdg.c
@@ -161,8 +161,8 @@ static void tcp_cdg_hystart_update(struct sock *sk)
 					      LINUX_MIB_TCPHYSTARTTRAINDETECT);
 				NET_ADD_STATS(sock_net(sk),
 					      LINUX_MIB_TCPHYSTARTTRAINCWND,
-					      tp->snd_cwnd);
-				tp->snd_ssthresh = tp->snd_cwnd;
+					      tcp_snd_cwnd(tp));
+				tp->snd_ssthresh = tcp_snd_cwnd(tp);
 				return;
 			}
 		}
@@ -180,8 +180,8 @@ static void tcp_cdg_hystart_update(struct sock *sk)
 					      LINUX_MIB_TCPHYSTARTDELAYDETECT);
 				NET_ADD_STATS(sock_net(sk),
 					      LINUX_MIB_TCPHYSTARTDELAYCWND,
-					      tp->snd_cwnd);
-				tp->snd_ssthresh = tp->snd_cwnd;
+					      tcp_snd_cwnd(tp));
+				tp->snd_ssthresh = tcp_snd_cwnd(tp);
 			}
 		}
 	}
@@ -252,7 +252,7 @@ static bool tcp_cdg_backoff(struct sock *sk, u32 grad)
 			return false;
 	}
 
-	ca->shadow_wnd = max(ca->shadow_wnd, tp->snd_cwnd);
+	ca->shadow_wnd = max(ca->shadow_wnd, tcp_snd_cwnd(tp));
 	ca->state = CDG_BACKOFF;
 	tcp_enter_cwr(sk);
 	return true;
@@ -285,14 +285,14 @@ static void tcp_cdg_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 	}
 
 	if (!tcp_is_cwnd_limited(sk)) {
-		ca->shadow_wnd = min(ca->shadow_wnd, tp->snd_cwnd);
+		ca->shadow_wnd = min(ca->shadow_wnd, tcp_snd_cwnd(tp));
 		return;
 	}
 
-	prior_snd_cwnd = tp->snd_cwnd;
+	prior_snd_cwnd = tcp_snd_cwnd(tp);
 	tcp_reno_cong_avoid(sk, ack, acked);
 
-	incr = tp->snd_cwnd - prior_snd_cwnd;
+	incr = tcp_snd_cwnd(tp) - prior_snd_cwnd;
 	ca->shadow_wnd = max(ca->shadow_wnd, ca->shadow_wnd + incr);
 }
 
@@ -331,15 +331,15 @@ static u32 tcp_cdg_ssthresh(struct sock *sk)
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if (ca->state == CDG_BACKOFF)
-		return max(2U, (tp->snd_cwnd * min(1024U, backoff_beta)) >> 10);
+		return max(2U, (tcp_snd_cwnd(tp) * min(1024U, backoff_beta)) >> 10);
 
 	if (ca->state == CDG_NONFULL && use_tolerance)
-		return tp->snd_cwnd;
+		return tcp_snd_cwnd(tp);
 
-	ca->shadow_wnd = min(ca->shadow_wnd >> 1, tp->snd_cwnd);
+	ca->shadow_wnd = min(ca->shadow_wnd >> 1, tcp_snd_cwnd(tp));
 	if (use_shadow)
-		return max3(2U, ca->shadow_wnd, tp->snd_cwnd >> 1);
-	return max(2U, tp->snd_cwnd >> 1);
+		return max3(2U, ca->shadow_wnd, tcp_snd_cwnd(tp) >> 1);
+	return max(2U, tcp_snd_cwnd(tp) >> 1);
 }
 
 static void tcp_cdg_cwnd_event(struct sock *sk, const enum tcp_ca_event ev)
@@ -357,7 +357,7 @@ static void tcp_cdg_cwnd_event(struct sock *sk, const enum tcp_ca_event ev)
 
 		ca->gradients = gradients;
 		ca->rtt_seq = tp->snd_nxt;
-		ca->shadow_wnd = tp->snd_cwnd;
+		ca->shadow_wnd = tcp_snd_cwnd(tp);
 		break;
 	case CA_EVENT_COMPLETE_CWR:
 		ca->state = CDG_UNKNOWN;
@@ -380,7 +380,7 @@ static void tcp_cdg_init(struct sock *sk)
 		ca->gradients = kcalloc(window, sizeof(ca->gradients[0]),
 					GFP_NOWAIT | __GFP_NOWARN);
 	ca->rtt_seq = tp->snd_nxt;
-	ca->shadow_wnd = tp->snd_cwnd;
+	ca->shadow_wnd = tcp_snd_cwnd(tp);
 }
 
 static void tcp_cdg_release(struct sock *sk)
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index db5831e6c136..f43db30a7195 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -395,10 +395,10 @@ int tcp_set_congestion_control(struct sock *sk, const char *name, bool load,
  */
 u32 tcp_slow_start(struct tcp_sock *tp, u32 acked)
 {
-	u32 cwnd = min(tp->snd_cwnd + acked, tp->snd_ssthresh);
+	u32 cwnd = min(tcp_snd_cwnd(tp) + acked, tp->snd_ssthresh);
 
-	acked -= cwnd - tp->snd_cwnd;
-	tp->snd_cwnd = min(cwnd, tp->snd_cwnd_clamp);
+	acked -= cwnd - tcp_snd_cwnd(tp);
+	tcp_snd_cwnd_set(tp, min(cwnd, tp->snd_cwnd_clamp));
 
 	return acked;
 }
@@ -412,7 +412,7 @@ void tcp_cong_avoid_ai(struct tcp_sock *tp, u32 w, u32 acked)
 	/* If credits accumulated at a higher w, apply them gently now. */
 	if (tp->snd_cwnd_cnt >= w) {
 		tp->snd_cwnd_cnt = 0;
-		tp->snd_cwnd++;
+		tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 	}
 
 	tp->snd_cwnd_cnt += acked;
@@ -420,9 +420,9 @@ void tcp_cong_avoid_ai(struct tcp_sock *tp, u32 w, u32 acked)
 		u32 delta = tp->snd_cwnd_cnt / w;
 
 		tp->snd_cwnd_cnt -= delta * w;
-		tp->snd_cwnd += delta;
+		tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + delta);
 	}
-	tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_cwnd_clamp);
+	tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp), tp->snd_cwnd_clamp));
 }
 EXPORT_SYMBOL_GPL(tcp_cong_avoid_ai);
 
@@ -447,7 +447,7 @@ void tcp_reno_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 			return;
 	}
 	/* In dangerous area, increase slowly. */
-	tcp_cong_avoid_ai(tp, tp->snd_cwnd, acked);
+	tcp_cong_avoid_ai(tp, tcp_snd_cwnd(tp), acked);
 }
 EXPORT_SYMBOL_GPL(tcp_reno_cong_avoid);
 
@@ -456,7 +456,7 @@ u32 tcp_reno_ssthresh(struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
 
-	return max(tp->snd_cwnd >> 1U, 2U);
+	return max(tcp_snd_cwnd(tp) >> 1U, 2U);
 }
 EXPORT_SYMBOL_GPL(tcp_reno_ssthresh);
 
@@ -464,7 +464,7 @@ u32 tcp_reno_undo_cwnd(struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
 
-	return max(tp->snd_cwnd, tp->prior_cwnd);
+	return max(tcp_snd_cwnd(tp), tp->prior_cwnd);
 }
 EXPORT_SYMBOL_GPL(tcp_reno_undo_cwnd);
 
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index 8d2d4d652f6d..af4fc067f2a1 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -332,7 +332,7 @@ static void cubictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		if (!acked)
 			return;
 	}
-	bictcp_update(ca, tp->snd_cwnd, acked);
+	bictcp_update(ca, tcp_snd_cwnd(tp), acked);
 	tcp_cong_avoid_ai(tp, ca->cnt, acked);
 }
 
@@ -344,13 +344,13 @@ static u32 cubictcp_recalc_ssthresh(struct sock *sk)
 	ca->epoch_start = 0;	/* end of epoch */
 
 	/* Wmax and fast convergence */
-	if (tp->snd_cwnd < ca->last_max_cwnd && fast_convergence)
-		ca->last_max_cwnd = (tp->snd_cwnd * (BICTCP_BETA_SCALE + beta))
+	if (tcp_snd_cwnd(tp) < ca->last_max_cwnd && fast_convergence)
+		ca->last_max_cwnd = (tcp_snd_cwnd(tp) * (BICTCP_BETA_SCALE + beta))
 			/ (2 * BICTCP_BETA_SCALE);
 	else
-		ca->last_max_cwnd = tp->snd_cwnd;
+		ca->last_max_cwnd = tcp_snd_cwnd(tp);
 
-	return max((tp->snd_cwnd * beta) / BICTCP_BETA_SCALE, 2U);
+	return max((tcp_snd_cwnd(tp) * beta) / BICTCP_BETA_SCALE, 2U);
 }
 
 static void cubictcp_state(struct sock *sk, u8 new_state)
@@ -411,13 +411,13 @@ static void hystart_update(struct sock *sk, u32 delay)
 				ca->found = 1;
 				pr_debug("hystart_ack_train (%u > %u) delay_min %u (+ ack_delay %u) cwnd %u\n",
 					 now - ca->round_start, threshold,
-					 ca->delay_min, hystart_ack_delay(sk), tp->snd_cwnd);
+					 ca->delay_min, hystart_ack_delay(sk), tcp_snd_cwnd(tp));
 				NET_INC_STATS(sock_net(sk),
 					      LINUX_MIB_TCPHYSTARTTRAINDETECT);
 				NET_ADD_STATS(sock_net(sk),
 					      LINUX_MIB_TCPHYSTARTTRAINCWND,
-					      tp->snd_cwnd);
-				tp->snd_ssthresh = tp->snd_cwnd;
+					      tcp_snd_cwnd(tp));
+				tp->snd_ssthresh = tcp_snd_cwnd(tp);
 			}
 		}
 	}
@@ -436,8 +436,8 @@ static void hystart_update(struct sock *sk, u32 delay)
 					      LINUX_MIB_TCPHYSTARTDELAYDETECT);
 				NET_ADD_STATS(sock_net(sk),
 					      LINUX_MIB_TCPHYSTARTDELAYCWND,
-					      tp->snd_cwnd);
-				tp->snd_ssthresh = tp->snd_cwnd;
+					      tcp_snd_cwnd(tp));
+				tp->snd_ssthresh = tcp_snd_cwnd(tp);
 			}
 		}
 	}
@@ -467,7 +467,7 @@ static void cubictcp_acked(struct sock *sk, const struct ack_sample *sample)
 
 	/* hystart triggers when cwnd is larger than some threshold */
 	if (!ca->found && tcp_in_slow_start(tp) && hystart &&
-	    tp->snd_cwnd >= hystart_low_window)
+	    tcp_snd_cwnd(tp) >= hystart_low_window)
 		hystart_update(sk, delay);
 }
 
diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c
index 79f705450c16..43bcefbaefbb 100644
--- a/net/ipv4/tcp_dctcp.c
+++ b/net/ipv4/tcp_dctcp.c
@@ -104,8 +104,8 @@ static u32 dctcp_ssthresh(struct sock *sk)
 	struct dctcp *ca = inet_csk_ca(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	ca->loss_cwnd = tp->snd_cwnd;
-	return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->dctcp_alpha) >> 11U), 2U);
+	ca->loss_cwnd = tcp_snd_cwnd(tp);
+	return max(tcp_snd_cwnd(tp) - ((tcp_snd_cwnd(tp) * ca->dctcp_alpha) >> 11U), 2U);
 }
 
 static void dctcp_update_alpha(struct sock *sk, u32 flags)
@@ -146,8 +146,8 @@ static void dctcp_react_to_loss(struct sock *sk)
 	struct dctcp *ca = inet_csk_ca(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	ca->loss_cwnd = tp->snd_cwnd;
-	tp->snd_ssthresh = max(tp->snd_cwnd >> 1U, 2U);
+	ca->loss_cwnd = tcp_snd_cwnd(tp);
+	tp->snd_ssthresh = max(tcp_snd_cwnd(tp) >> 1U, 2U);
 }
 
 static void dctcp_state(struct sock *sk, u8 new_state)
@@ -209,8 +209,9 @@ static size_t dctcp_get_info(struct sock *sk, u32 ext, int *attr,
 static u32 dctcp_cwnd_undo(struct sock *sk)
 {
 	const struct dctcp *ca = inet_csk_ca(sk);
+	struct tcp_sock *tp = tcp_sk(sk);
 
-	return max(tcp_sk(sk)->snd_cwnd, ca->loss_cwnd);
+	return max(tcp_snd_cwnd(tp), ca->loss_cwnd);
 }
 
 static struct tcp_congestion_ops dctcp __read_mostly = {
diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c
index 349069d6cd0a..c6de5ce79ad3 100644
--- a/net/ipv4/tcp_highspeed.c
+++ b/net/ipv4/tcp_highspeed.c
@@ -127,22 +127,22 @@ static void hstcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		 *     snd_cwnd <=
 		 *     hstcp_aimd_vals[ca->ai].cwnd
 		 */
-		if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
-			while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
+		if (tcp_snd_cwnd(tp) > hstcp_aimd_vals[ca->ai].cwnd) {
+			while (tcp_snd_cwnd(tp) > hstcp_aimd_vals[ca->ai].cwnd &&
 			       ca->ai < HSTCP_AIMD_MAX - 1)
 				ca->ai++;
-		} else if (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd) {
-			while (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd)
+		} else if (ca->ai && tcp_snd_cwnd(tp) <= hstcp_aimd_vals[ca->ai-1].cwnd) {
+			while (ca->ai && tcp_snd_cwnd(tp) <= hstcp_aimd_vals[ca->ai-1].cwnd)
 				ca->ai--;
 		}
 
 		/* Do additive increase */
-		if (tp->snd_cwnd < tp->snd_cwnd_clamp) {
+		if (tcp_snd_cwnd(tp) < tp->snd_cwnd_clamp) {
 			/* cwnd = cwnd + a(w) / cwnd */
 			tp->snd_cwnd_cnt += ca->ai + 1;
-			if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
-				tp->snd_cwnd_cnt -= tp->snd_cwnd;
-				tp->snd_cwnd++;
+			if (tp->snd_cwnd_cnt >= tcp_snd_cwnd(tp)) {
+				tp->snd_cwnd_cnt -= tcp_snd_cwnd(tp);
+				tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 			}
 		}
 	}
@@ -154,7 +154,7 @@ static u32 hstcp_ssthresh(struct sock *sk)
 	struct hstcp *ca = inet_csk_ca(sk);
 
 	/* Do multiplicative decrease */
-	return max(tp->snd_cwnd - ((tp->snd_cwnd * hstcp_aimd_vals[ca->ai].md) >> 8), 2U);
+	return max(tcp_snd_cwnd(tp) - ((tcp_snd_cwnd(tp) * hstcp_aimd_vals[ca->ai].md) >> 8), 2U);
 }
 
 static struct tcp_congestion_ops tcp_highspeed __read_mostly = {
diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c
index 55adcfcf96fe..52b1f2665dfa 100644
--- a/net/ipv4/tcp_htcp.c
+++ b/net/ipv4/tcp_htcp.c
@@ -124,7 +124,7 @@ static void measure_achieved_throughput(struct sock *sk,
 
 	ca->packetcount += sample->pkts_acked;
 
-	if (ca->packetcount >= tp->snd_cwnd - (ca->alpha >> 7 ? : 1) &&
+	if (ca->packetcount >= tcp_snd_cwnd(tp) - (ca->alpha >> 7 ? : 1) &&
 	    now - ca->lasttime >= ca->minRTT &&
 	    ca->minRTT > 0) {
 		__u32 cur_Bi = ca->packetcount * HZ / (now - ca->lasttime);
@@ -225,7 +225,7 @@ static u32 htcp_recalc_ssthresh(struct sock *sk)
 	const struct htcp *ca = inet_csk_ca(sk);
 
 	htcp_param_update(sk);
-	return max((tp->snd_cwnd * ca->beta) >> 7, 2U);
+	return max((tcp_snd_cwnd(tp) * ca->beta) >> 7, 2U);
 }
 
 static void htcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
@@ -242,9 +242,9 @@ static void htcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		/* In dangerous area, increase slowly.
 		 * In theory this is tp->snd_cwnd += alpha / tp->snd_cwnd
 		 */
-		if ((tp->snd_cwnd_cnt * ca->alpha)>>7 >= tp->snd_cwnd) {
-			if (tp->snd_cwnd < tp->snd_cwnd_clamp)
-				tp->snd_cwnd++;
+		if ((tp->snd_cwnd_cnt * ca->alpha)>>7 >= tcp_snd_cwnd(tp)) {
+			if (tcp_snd_cwnd(tp) < tp->snd_cwnd_clamp)
+				tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 			tp->snd_cwnd_cnt = 0;
 			htcp_alpha_update(ca);
 		} else
diff --git a/net/ipv4/tcp_hybla.c b/net/ipv4/tcp_hybla.c
index be39327e04e6..abd7d91807e5 100644
--- a/net/ipv4/tcp_hybla.c
+++ b/net/ipv4/tcp_hybla.c
@@ -54,7 +54,7 @@ static void hybla_init(struct sock *sk)
 	ca->rho2_7ls = 0;
 	ca->snd_cwnd_cents = 0;
 	ca->hybla_en = true;
-	tp->snd_cwnd = 2;
+	tcp_snd_cwnd_set(tp, 2);
 	tp->snd_cwnd_clamp = 65535;
 
 	/* 1st Rho measurement based on initial srtt */
@@ -62,7 +62,7 @@ static void hybla_init(struct sock *sk)
 
 	/* set minimum rtt as this is the 1st ever seen */
 	ca->minrtt_us = tp->srtt_us;
-	tp->snd_cwnd = ca->rho;
+	tcp_snd_cwnd_set(tp, ca->rho);
 }
 
 static void hybla_state(struct sock *sk, u8 ca_state)
@@ -137,31 +137,31 @@ static void hybla_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		 * as long as increment is estimated as (rho<<7)/window
 		 * it already is <<7 and we can easily count its fractions.
 		 */
-		increment = ca->rho2_7ls / tp->snd_cwnd;
+		increment = ca->rho2_7ls / tcp_snd_cwnd(tp);
 		if (increment < 128)
 			tp->snd_cwnd_cnt++;
 	}
 
 	odd = increment % 128;
-	tp->snd_cwnd += increment >> 7;
+	tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + (increment >> 7));
 	ca->snd_cwnd_cents += odd;
 
 	/* check when fractions goes >=128 and increase cwnd by 1. */
 	while (ca->snd_cwnd_cents >= 128) {
-		tp->snd_cwnd++;
+		tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 		ca->snd_cwnd_cents -= 128;
 		tp->snd_cwnd_cnt = 0;
 	}
 	/* check when cwnd has not been incremented for a while */
-	if (increment == 0 && odd == 0 && tp->snd_cwnd_cnt >= tp->snd_cwnd) {
-		tp->snd_cwnd++;
+	if (increment == 0 && odd == 0 && tp->snd_cwnd_cnt >= tcp_snd_cwnd(tp)) {
+		tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 		tp->snd_cwnd_cnt = 0;
 	}
 	/* clamp down slowstart cwnd to ssthresh value. */
 	if (is_slowstart)
-		tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh);
+		tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp), tp->snd_ssthresh));
 
-	tp->snd_cwnd = min_t(u32, tp->snd_cwnd, tp->snd_cwnd_clamp);
+	tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp), tp->snd_cwnd_clamp));
 }
 
 static struct tcp_congestion_ops tcp_hybla __read_mostly = {
diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
index 00e54873213e..c0c81a2c77fa 100644
--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -224,7 +224,7 @@ static void update_params(struct sock *sk)
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct illinois *ca = inet_csk_ca(sk);
 
-	if (tp->snd_cwnd < win_thresh) {
+	if (tcp_snd_cwnd(tp) < win_thresh) {
 		ca->alpha = ALPHA_BASE;
 		ca->beta = BETA_BASE;
 	} else if (ca->cnt_rtt > 0) {
@@ -284,9 +284,9 @@ static void tcp_illinois_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		 * tp->snd_cwnd += alpha/tp->snd_cwnd
 		*/
 		delta = (tp->snd_cwnd_cnt * ca->alpha) >> ALPHA_SHIFT;
-		if (delta >= tp->snd_cwnd) {
-			tp->snd_cwnd = min(tp->snd_cwnd + delta / tp->snd_cwnd,
-					   (u32)tp->snd_cwnd_clamp);
+		if (delta >= tcp_snd_cwnd(tp)) {
+			tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp) + delta / tcp_snd_cwnd(tp),
+						 (u32)tp->snd_cwnd_clamp));
 			tp->snd_cwnd_cnt = 0;
 		}
 	}
@@ -296,9 +296,11 @@ static u32 tcp_illinois_ssthresh(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct illinois *ca = inet_csk_ca(sk);
+	u32 decr;
 
 	/* Multiplicative decrease */
-	return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->beta) >> BETA_SHIFT), 2U);
+	decr = (tcp_snd_cwnd(tp) * ca->beta) >> BETA_SHIFT;
+	return max(tcp_snd_cwnd(tp) - decr, 2U);
 }
 
 /* Extract info for Tcp socket info provided via netlink. */
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index dfd32cd3b95e..4e87614313c0 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -414,7 +414,7 @@ static void tcp_sndbuf_expand(struct sock *sk)
 	per_mss = roundup_pow_of_two(per_mss) +
 		  SKB_DATA_ALIGN(sizeof(struct sk_buff));
 
-	nr_segs = max_t(u32, TCP_INIT_CWND, tp->snd_cwnd);
+	nr_segs = max_t(u32, TCP_INIT_CWND, tcp_snd_cwnd(tp));
 	nr_segs = max_t(u32, nr_segs, tp->reordering + 1);
 
 	/* Fast Recovery (RFC 5681 3.2) :
@@ -901,12 +901,12 @@ static void tcp_update_pacing_rate(struct sock *sk)
 	 *	 If snd_cwnd >= (tp->snd_ssthresh / 2), we are approaching
 	 *	 end of slow start and should slow down.
 	 */
-	if (tp->snd_cwnd < tp->snd_ssthresh / 2)
+	if (tcp_snd_cwnd(tp) < tp->snd_ssthresh / 2)
 		rate *= sock_net(sk)->ipv4.sysctl_tcp_pacing_ss_ratio;
 	else
 		rate *= sock_net(sk)->ipv4.sysctl_tcp_pacing_ca_ratio;
 
-	rate *= max(tp->snd_cwnd, tp->packets_out);
+	rate *= max(tcp_snd_cwnd(tp), tp->packets_out);
 
 	if (likely(tp->srtt_us))
 		do_div(rate, tp->srtt_us);
@@ -2139,12 +2139,12 @@ void tcp_enter_loss(struct sock *sk)
 	    !after(tp->high_seq, tp->snd_una) ||
 	    (icsk->icsk_ca_state == TCP_CA_Loss && !icsk->icsk_retransmits)) {
 		tp->prior_ssthresh = tcp_current_ssthresh(sk);
-		tp->prior_cwnd = tp->snd_cwnd;
+		tp->prior_cwnd = tcp_snd_cwnd(tp);
 		tp->snd_ssthresh = icsk->icsk_ca_ops->ssthresh(sk);
 		tcp_ca_event(sk, CA_EVENT_LOSS);
 		tcp_init_undo(tp);
 	}
-	tp->snd_cwnd	   = tcp_packets_in_flight(tp) + 1;
+	tcp_snd_cwnd_set(tp, tcp_packets_in_flight(tp) + 1);
 	tp->snd_cwnd_cnt   = 0;
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 
@@ -2450,7 +2450,7 @@ static void DBGUNDO(struct sock *sk, const char *msg)
 		pr_debug("Undo %s %pI4/%u c%u l%u ss%u/%u p%u\n",
 			 msg,
 			 &inet->inet_daddr, ntohs(inet->inet_dport),
-			 tp->snd_cwnd, tcp_left_out(tp),
+			 tcp_snd_cwnd(tp), tcp_left_out(tp),
 			 tp->snd_ssthresh, tp->prior_ssthresh,
 			 tp->packets_out);
 	}
@@ -2459,7 +2459,7 @@ static void DBGUNDO(struct sock *sk, const char *msg)
 		pr_debug("Undo %s %pI6/%u c%u l%u ss%u/%u p%u\n",
 			 msg,
 			 &sk->sk_v6_daddr, ntohs(inet->inet_dport),
-			 tp->snd_cwnd, tcp_left_out(tp),
+			 tcp_snd_cwnd(tp), tcp_left_out(tp),
 			 tp->snd_ssthresh, tp->prior_ssthresh,
 			 tp->packets_out);
 	}
@@ -2484,7 +2484,7 @@ static void tcp_undo_cwnd_reduction(struct sock *sk, bool unmark_loss)
 	if (tp->prior_ssthresh) {
 		const struct inet_connection_sock *icsk = inet_csk(sk);
 
-		tp->snd_cwnd = icsk->icsk_ca_ops->undo_cwnd(sk);
+		tcp_snd_cwnd_set(tp, icsk->icsk_ca_ops->undo_cwnd(sk));
 
 		if (tp->prior_ssthresh > tp->snd_ssthresh) {
 			tp->snd_ssthresh = tp->prior_ssthresh;
@@ -2591,7 +2591,7 @@ static void tcp_init_cwnd_reduction(struct sock *sk)
 	tp->high_seq = tp->snd_nxt;
 	tp->tlp_high_seq = 0;
 	tp->snd_cwnd_cnt = 0;
-	tp->prior_cwnd = tp->snd_cwnd;
+	tp->prior_cwnd = tcp_snd_cwnd(tp);
 	tp->prr_delivered = 0;
 	tp->prr_out = 0;
 	tp->snd_ssthresh = inet_csk(sk)->icsk_ca_ops->ssthresh(sk);
@@ -2621,7 +2621,7 @@ void tcp_cwnd_reduction(struct sock *sk, int newly_acked_sacked, int newly_lost,
 	}
 	/* Force a fast retransmit upon entering fast recovery */
 	sndcnt = max(sndcnt, (tp->prr_out ? 0 : 1));
-	tp->snd_cwnd = tcp_packets_in_flight(tp) + sndcnt;
+	tcp_snd_cwnd_set(tp, tcp_packets_in_flight(tp) + sndcnt);
 }
 
 static inline void tcp_end_cwnd_reduction(struct sock *sk)
@@ -2634,7 +2634,7 @@ static inline void tcp_end_cwnd_reduction(struct sock *sk)
 	/* Reset cwnd to ssthresh in CWR or Recovery (unless it's undone) */
 	if (tp->snd_ssthresh < TCP_INFINITE_SSTHRESH &&
 	    (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR || tp->undo_marker)) {
-		tp->snd_cwnd = tp->snd_ssthresh;
+		tcp_snd_cwnd_set(tp, tp->snd_ssthresh);
 		tp->snd_cwnd_stamp = tcp_jiffies32;
 	}
 	tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
@@ -2701,9 +2701,9 @@ static void tcp_mtup_probe_success(struct sock *sk)
 
 	/* FIXME: breaks with very large cwnd */
 	tp->prior_ssthresh = tcp_current_ssthresh(sk);
-	tp->snd_cwnd = tp->snd_cwnd *
-		       tcp_mss_to_mtu(sk, tp->mss_cache) /
-		       icsk->icsk_mtup.probe_size;
+	tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) *
+			     tcp_mss_to_mtu(sk, tp->mss_cache) /
+			     icsk->icsk_mtup.probe_size);
 	tp->snd_cwnd_cnt = 0;
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 	tp->snd_ssthresh = tcp_current_ssthresh(sk);
@@ -3026,7 +3026,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una,
 		    tp->snd_una == tp->mtu_probe.probe_seq_start) {
 			tcp_mtup_probe_failed(sk);
 			/* Restores the reduction we did in tcp_mtup_probe() */
-			tp->snd_cwnd++;
+			tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 			tcp_simple_retransmit(sk);
 			return;
 		}
@@ -5403,7 +5403,7 @@ static bool tcp_should_expand_sndbuf(const struct sock *sk)
 		return false;
 
 	/* If we filled the congestion window, do not expand.  */
-	if (tcp_packets_in_flight(tp) >= tp->snd_cwnd)
+	if (tcp_packets_in_flight(tp) >= tcp_snd_cwnd(tp))
 		return false;
 
 	return true;
@@ -5970,9 +5970,9 @@ void tcp_init_transfer(struct sock *sk, int bpf_op, struct sk_buff *skb)
 	 * retransmission has occurred.
 	 */
 	if (tp->total_retrans > 1 && tp->undo_marker)
-		tp->snd_cwnd = 1;
+		tcp_snd_cwnd_set(tp, 1);
 	else
-		tp->snd_cwnd = tcp_init_cwnd(tp, __sk_dst_get(sk));
+		tcp_snd_cwnd_set(tp, tcp_init_cwnd(tp, __sk_dst_get(sk)));
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 
 	bpf_skops_established(sk, bpf_op, skb);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 0fe9461647da..a189625098ba 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2656,7 +2656,7 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i)
 		jiffies_to_clock_t(icsk->icsk_rto),
 		jiffies_to_clock_t(icsk->icsk_ack.ato),
 		(icsk->icsk_ack.quick << 1) | inet_csk_in_pingpong_mode(sk),
-		tp->snd_cwnd,
+		tcp_snd_cwnd(tp),
 		state == TCP_LISTEN ?
 		    fastopenq->max_qlen :
 		    (tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh));
diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c
index 82b36ec3f2f8..ae36780977d2 100644
--- a/net/ipv4/tcp_lp.c
+++ b/net/ipv4/tcp_lp.c
@@ -297,7 +297,7 @@ static void tcp_lp_pkts_acked(struct sock *sk, const struct ack_sample *sample)
 		lp->flag &= ~LP_WITHIN_THR;
 
 	pr_debug("TCP-LP: %05o|%5u|%5u|%15u|%15u|%15u\n", lp->flag,
-		 tp->snd_cwnd, lp->remote_hz, lp->owd_min, lp->owd_max,
+		 tcp_snd_cwnd(tp), lp->remote_hz, lp->owd_min, lp->owd_max,
 		 lp->sowd >> 3);
 
 	if (lp->flag & LP_WITHIN_THR)
@@ -313,12 +313,12 @@ static void tcp_lp_pkts_acked(struct sock *sk, const struct ack_sample *sample)
 	/* happened within inference
 	 * drop snd_cwnd into 1 */
 	if (lp->flag & LP_WITHIN_INF)
-		tp->snd_cwnd = 1U;
+		tcp_snd_cwnd_set(tp, 1U);
 
 	/* happened after inference
 	 * cut snd_cwnd into half */
 	else
-		tp->snd_cwnd = max(tp->snd_cwnd >> 1U, 1U);
+		tcp_snd_cwnd_set(tp, max(tcp_snd_cwnd(tp) >> 1U, 1U));
 
 	/* record this drop time */
 	lp->last_drop = now;
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 0588b004ddac..7029b0e98edb 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -388,15 +388,15 @@ void tcp_update_metrics(struct sock *sk)
 		if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
 		    !tcp_metric_locked(tm, TCP_METRIC_SSTHRESH)) {
 			val = tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
-			if (val && (tp->snd_cwnd >> 1) > val)
+			if (val && (tcp_snd_cwnd(tp) >> 1) > val)
 				tcp_metric_set(tm, TCP_METRIC_SSTHRESH,
-					       tp->snd_cwnd >> 1);
+					       tcp_snd_cwnd(tp) >> 1);
 		}
 		if (!tcp_metric_locked(tm, TCP_METRIC_CWND)) {
 			val = tcp_metric_get(tm, TCP_METRIC_CWND);
-			if (tp->snd_cwnd > val)
+			if (tcp_snd_cwnd(tp) > val)
 				tcp_metric_set(tm, TCP_METRIC_CWND,
-					       tp->snd_cwnd);
+					       tcp_snd_cwnd(tp));
 		}
 	} else if (!tcp_in_slow_start(tp) &&
 		   icsk->icsk_ca_state == TCP_CA_Open) {
@@ -404,10 +404,10 @@ void tcp_update_metrics(struct sock *sk)
 		if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
 		    !tcp_metric_locked(tm, TCP_METRIC_SSTHRESH))
 			tcp_metric_set(tm, TCP_METRIC_SSTHRESH,
-				       max(tp->snd_cwnd >> 1, tp->snd_ssthresh));
+				       max(tcp_snd_cwnd(tp) >> 1, tp->snd_ssthresh));
 		if (!tcp_metric_locked(tm, TCP_METRIC_CWND)) {
 			val = tcp_metric_get(tm, TCP_METRIC_CWND);
-			tcp_metric_set(tm, TCP_METRIC_CWND, (val + tp->snd_cwnd) >> 1);
+			tcp_metric_set(tm, TCP_METRIC_CWND, (val + tcp_snd_cwnd(tp)) >> 1);
 		}
 	} else {
 		/* Else slow start did not finish, cwnd is non-sense,
diff --git a/net/ipv4/tcp_nv.c b/net/ipv4/tcp_nv.c
index 95db7a11ba2a..63024ec17b20 100644
--- a/net/ipv4/tcp_nv.c
+++ b/net/ipv4/tcp_nv.c
@@ -198,10 +198,10 @@ static void tcpnv_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 	}
 
 	if (ca->cwnd_growth_factor < 0) {
-		cnt = tp->snd_cwnd << -ca->cwnd_growth_factor;
+		cnt = tcp_snd_cwnd(tp) << -ca->cwnd_growth_factor;
 		tcp_cong_avoid_ai(tp, cnt, acked);
 	} else {
-		cnt = max(4U, tp->snd_cwnd >> ca->cwnd_growth_factor);
+		cnt = max(4U, tcp_snd_cwnd(tp) >> ca->cwnd_growth_factor);
 		tcp_cong_avoid_ai(tp, cnt, acked);
 	}
 }
@@ -210,7 +210,7 @@ static u32 tcpnv_recalc_ssthresh(struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
 
-	return max((tp->snd_cwnd * nv_loss_dec_factor) >> 10, 2U);
+	return max((tcp_snd_cwnd(tp) * nv_loss_dec_factor) >> 10, 2U);
 }
 
 static void tcpnv_state(struct sock *sk, u8 new_state)
@@ -258,7 +258,7 @@ static void tcpnv_acked(struct sock *sk, const struct ack_sample *sample)
 		return;
 
 	/* Stop cwnd growth if we were in catch up mode */
-	if (ca->nv_catchup && tp->snd_cwnd >= nv_min_cwnd) {
+	if (ca->nv_catchup && tcp_snd_cwnd(tp) >= nv_min_cwnd) {
 		ca->nv_catchup = 0;
 		ca->nv_allow_cwnd_growth = 0;
 	}
@@ -372,7 +372,7 @@ static void tcpnv_acked(struct sock *sk, const struct ack_sample *sample)
 		 * if cwnd < max_win, grow cwnd
 		 * else leave the same
 		 */
-		if (tp->snd_cwnd > max_win) {
+		if (tcp_snd_cwnd(tp) > max_win) {
 			/* there is congestion, check that it is ok
 			 * to make a CA decision
 			 * 1. We should have at least nv_dec_eval_min_calls
@@ -399,20 +399,20 @@ static void tcpnv_acked(struct sock *sk, const struct ack_sample *sample)
 			ca->nv_allow_cwnd_growth = 0;
 			tp->snd_ssthresh =
 				(nv_ssthresh_factor * max_win) >> 3;
-			if (tp->snd_cwnd - max_win > 2) {
+			if (tcp_snd_cwnd(tp) - max_win > 2) {
 				/* gap > 2, we do exponential cwnd decrease */
 				int dec;
 
-				dec = max(2U, ((tp->snd_cwnd - max_win) *
+				dec = max(2U, ((tcp_snd_cwnd(tp) - max_win) *
 					       nv_cong_dec_mult) >> 7);
-				tp->snd_cwnd -= dec;
+				tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) - dec);
 			} else if (nv_cong_dec_mult > 0) {
-				tp->snd_cwnd = max_win;
+				tcp_snd_cwnd_set(tp, max_win);
 			}
 			if (ca->cwnd_growth_factor > 0)
 				ca->cwnd_growth_factor = 0;
 			ca->nv_no_cong_cnt = 0;
-		} else if (tp->snd_cwnd <= max_win - nv_pad_buffer) {
+		} else if (tcp_snd_cwnd(tp) <= max_win - nv_pad_buffer) {
 			/* There is no congestion, grow cwnd if allowed*/
 			if (ca->nv_eval_call_cnt < nv_inc_eval_min_calls)
 				return;
@@ -445,8 +445,8 @@ static void tcpnv_acked(struct sock *sk, const struct ack_sample *sample)
 		 * (it wasn't before, if it is now is because nv
 		 *  decreased it).
 		 */
-		if (tp->snd_cwnd < nv_min_cwnd)
-			tp->snd_cwnd = nv_min_cwnd;
+		if (tcp_snd_cwnd(tp) < nv_min_cwnd)
+			tcp_snd_cwnd_set(tp, nv_min_cwnd);
 	}
 }
 
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index df413282fa2e..ed7125a47ce0 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -143,7 +143,7 @@ void tcp_cwnd_restart(struct sock *sk, s32 delta)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	u32 restart_cwnd = tcp_init_cwnd(tp, __sk_dst_get(sk));
-	u32 cwnd = tp->snd_cwnd;
+	u32 cwnd = tcp_snd_cwnd(tp);
 
 	tcp_ca_event(sk, CA_EVENT_CWND_RESTART);
 
@@ -152,7 +152,7 @@ void tcp_cwnd_restart(struct sock *sk, s32 delta)
 
 	while ((delta -= inet_csk(sk)->icsk_rto) > 0 && cwnd > restart_cwnd)
 		cwnd >>= 1;
-	tp->snd_cwnd = max(cwnd, restart_cwnd);
+	tcp_snd_cwnd_set(tp, max(cwnd, restart_cwnd));
 	tp->snd_cwnd_stamp = tcp_jiffies32;
 	tp->snd_cwnd_used = 0;
 }
@@ -1015,7 +1015,7 @@ static void tcp_tsq_write(struct sock *sk)
 		struct tcp_sock *tp = tcp_sk(sk);
 
 		if (tp->lost_out > tp->retrans_out &&
-		    tp->snd_cwnd > tcp_packets_in_flight(tp)) {
+		    tcp_snd_cwnd(tp) > tcp_packets_in_flight(tp)) {
 			tcp_mstamp_refresh(tp);
 			tcp_xmit_retransmit_queue(sk);
 		}
@@ -1866,9 +1866,9 @@ static void tcp_cwnd_application_limited(struct sock *sk)
 		/* Limited by application or receiver window. */
 		u32 init_win = tcp_init_cwnd(tp, __sk_dst_get(sk));
 		u32 win_used = max(tp->snd_cwnd_used, init_win);
-		if (win_used < tp->snd_cwnd) {
+		if (win_used < tcp_snd_cwnd(tp)) {
 			tp->snd_ssthresh = tcp_current_ssthresh(sk);
-			tp->snd_cwnd = (tp->snd_cwnd + win_used) >> 1;
+			tcp_snd_cwnd_set(tp, (tcp_snd_cwnd(tp) + win_used) >> 1);
 		}
 		tp->snd_cwnd_used = 0;
 	}
@@ -2040,7 +2040,7 @@ static inline unsigned int tcp_cwnd_test(const struct tcp_sock *tp,
 		return 1;
 
 	in_flight = tcp_packets_in_flight(tp);
-	cwnd = tp->snd_cwnd;
+	cwnd = tcp_snd_cwnd(tp);
 	if (in_flight >= cwnd)
 		return 0;
 
@@ -2197,12 +2197,12 @@ static bool tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb,
 	in_flight = tcp_packets_in_flight(tp);
 
 	BUG_ON(tcp_skb_pcount(skb) <= 1);
-	BUG_ON(tp->snd_cwnd <= in_flight);
+	BUG_ON(tcp_snd_cwnd(tp) <= in_flight);
 
 	send_win = tcp_wnd_end(tp) - TCP_SKB_CB(skb)->seq;
 
 	/* From in_flight test above, we know that cwnd > in_flight.  */
-	cong_win = (tp->snd_cwnd - in_flight) * tp->mss_cache;
+	cong_win = (tcp_snd_cwnd(tp) - in_flight) * tp->mss_cache;
 
 	limit = min(send_win, cong_win);
 
@@ -2216,7 +2216,7 @@ static bool tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb,
 
 	win_divisor = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_tso_win_divisor);
 	if (win_divisor) {
-		u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
+		u32 chunk = min(tp->snd_wnd, tcp_snd_cwnd(tp) * tp->mss_cache);
 
 		/* If at least some fraction of a window is available,
 		 * just use it.
@@ -2344,7 +2344,7 @@ static int tcp_mtu_probe(struct sock *sk)
 	if (likely(!icsk->icsk_mtup.enabled ||
 		   icsk->icsk_mtup.probe_size ||
 		   inet_csk(sk)->icsk_ca_state != TCP_CA_Open ||
-		   tp->snd_cwnd < 11 ||
+		   tcp_snd_cwnd(tp) < 11 ||
 		   tp->rx_opt.num_sacks || tp->rx_opt.dsack))
 		return -1;
 
@@ -2380,7 +2380,7 @@ static int tcp_mtu_probe(struct sock *sk)
 		return 0;
 
 	/* Do we need to wait to drain cwnd? With none in flight, don't stall */
-	if (tcp_packets_in_flight(tp) + 2 > tp->snd_cwnd) {
+	if (tcp_packets_in_flight(tp) + 2 > tcp_snd_cwnd(tp)) {
 		if (!tcp_packets_in_flight(tp))
 			return -1;
 		else
@@ -2452,7 +2452,7 @@ static int tcp_mtu_probe(struct sock *sk)
 	if (!tcp_transmit_skb(sk, nskb, 1, GFP_ATOMIC)) {
 		/* Decrement cwnd here because we are sending
 		 * effectively two packets. */
-		tp->snd_cwnd--;
+		tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) - 1);
 		tcp_event_new_data_sent(sk, nskb);
 
 		icsk->icsk_mtup.probe_size = tcp_mss_to_mtu(sk, nskb->len);
@@ -2709,7 +2709,7 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle,
 	else
 		tcp_chrono_stop(sk, TCP_CHRONO_RWND_LIMITED);
 
-	is_cwnd_limited |= (tcp_packets_in_flight(tp) >= tp->snd_cwnd);
+	is_cwnd_limited |= (tcp_packets_in_flight(tp) >= tcp_snd_cwnd(tp));
 	if (likely(sent_pkts || is_cwnd_limited))
 		tcp_cwnd_validate(sk, is_cwnd_limited);
 
@@ -2819,7 +2819,7 @@ void tcp_send_loss_probe(struct sock *sk)
 	if (unlikely(!skb)) {
 		WARN_ONCE(tp->packets_out,
 			  "invalid inflight: %u state %u cwnd %u mss %d\n",
-			  tp->packets_out, sk->sk_state, tp->snd_cwnd, mss);
+			  tp->packets_out, sk->sk_state, tcp_snd_cwnd(tp), mss);
 		inet_csk(sk)->icsk_pending = 0;
 		return;
 	}
@@ -3308,7 +3308,7 @@ void tcp_xmit_retransmit_queue(struct sock *sk)
 		if (!hole)
 			tp->retransmit_skb_hint = skb;
 
-		segs = tp->snd_cwnd - tcp_packets_in_flight(tp);
+		segs = tcp_snd_cwnd(tp) - tcp_packets_in_flight(tp);
 		if (segs <= 0)
 			break;
 		sacked = TCP_SKB_CB(skb)->sacked;
diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
index 6ab197928abb..042e27f54116 100644
--- a/net/ipv4/tcp_rate.c
+++ b/net/ipv4/tcp_rate.c
@@ -194,7 +194,7 @@ void tcp_rate_check_app_limited(struct sock *sk)
 	    /* Nothing in sending host's qdisc queues or NIC tx queue. */
 	    sk_wmem_alloc_get(sk) < SKB_TRUESIZE(1) &&
 	    /* We are not limited by CWND. */
-	    tcp_packets_in_flight(tp) < tp->snd_cwnd &&
+	    tcp_packets_in_flight(tp) < tcp_snd_cwnd(tp) &&
 	    /* All lost packets have been retransmitted. */
 	    tp->lost_out <= tp->retrans_out)
 		tp->app_limited =
diff --git a/net/ipv4/tcp_scalable.c b/net/ipv4/tcp_scalable.c
index 5842081bc8a2..862b96248a92 100644
--- a/net/ipv4/tcp_scalable.c
+++ b/net/ipv4/tcp_scalable.c
@@ -27,7 +27,7 @@ static void tcp_scalable_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		if (!acked)
 			return;
 	}
-	tcp_cong_avoid_ai(tp, min(tp->snd_cwnd, TCP_SCALABLE_AI_CNT),
+	tcp_cong_avoid_ai(tp, min(tcp_snd_cwnd(tp), TCP_SCALABLE_AI_CNT),
 			  acked);
 }
 
@@ -35,7 +35,7 @@ static u32 tcp_scalable_ssthresh(struct sock *sk)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
 
-	return max(tp->snd_cwnd - (tp->snd_cwnd>>TCP_SCALABLE_MD_SCALE), 2U);
+	return max(tcp_snd_cwnd(tp) - (tcp_snd_cwnd(tp)>>TCP_SCALABLE_MD_SCALE), 2U);
 }
 
 static struct tcp_congestion_ops tcp_scalable __read_mostly = {
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index c8003c8aad2c..786848ad37ea 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -159,7 +159,7 @@ EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
 
 static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
 {
-	return  min(tp->snd_ssthresh, tp->snd_cwnd);
+	return  min(tp->snd_ssthresh, tcp_snd_cwnd(tp));
 }
 
 static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
@@ -217,14 +217,14 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 			 * This is:
 			 *     (actual rate in segments) * baseRTT
 			 */
-			target_cwnd = (u64)tp->snd_cwnd * vegas->baseRTT;
+			target_cwnd = (u64)tcp_snd_cwnd(tp) * vegas->baseRTT;
 			do_div(target_cwnd, rtt);
 
 			/* Calculate the difference between the window we had,
 			 * and the window we would like to have. This quantity
 			 * is the "Diff" from the Arizona Vegas papers.
 			 */
-			diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
+			diff = tcp_snd_cwnd(tp) * (rtt-vegas->baseRTT) / vegas->baseRTT;
 
 			if (diff > gamma && tcp_in_slow_start(tp)) {
 				/* Going too fast. Time to slow down
@@ -238,7 +238,8 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 				 * truncation robs us of full link
 				 * utilization.
 				 */
-				tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
+				tcp_snd_cwnd_set(tp, min(tcp_snd_cwnd(tp),
+							 (u32)target_cwnd + 1));
 				tp->snd_ssthresh = tcp_vegas_ssthresh(tp);
 
 			} else if (tcp_in_slow_start(tp)) {
@@ -254,14 +255,14 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 					/* The old window was too fast, so
 					 * we slow down.
 					 */
-					tp->snd_cwnd--;
+					tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) - 1);
 					tp->snd_ssthresh
 						= tcp_vegas_ssthresh(tp);
 				} else if (diff < alpha) {
 					/* We don't have enough extra packets
 					 * in the network, so speed up.
 					 */
-					tp->snd_cwnd++;
+					tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 				} else {
 					/* Sending just as fast as we
 					 * should be.
@@ -269,10 +270,10 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 				}
 			}
 
-			if (tp->snd_cwnd < 2)
-				tp->snd_cwnd = 2;
-			else if (tp->snd_cwnd > tp->snd_cwnd_clamp)
-				tp->snd_cwnd = tp->snd_cwnd_clamp;
+			if (tcp_snd_cwnd(tp) < 2)
+				tcp_snd_cwnd_set(tp, 2);
+			else if (tcp_snd_cwnd(tp) > tp->snd_cwnd_clamp)
+				tcp_snd_cwnd_set(tp, tp->snd_cwnd_clamp);
 
 			tp->snd_ssthresh = tcp_current_ssthresh(sk);
 		}
diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
index cd50a61c9976..366ff6f214b2 100644
--- a/net/ipv4/tcp_veno.c
+++ b/net/ipv4/tcp_veno.c
@@ -146,11 +146,11 @@ static void tcp_veno_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 
 		rtt = veno->minrtt;
 
-		target_cwnd = (u64)tp->snd_cwnd * veno->basertt;
+		target_cwnd = (u64)tcp_snd_cwnd(tp) * veno->basertt;
 		target_cwnd <<= V_PARAM_SHIFT;
 		do_div(target_cwnd, rtt);
 
-		veno->diff = (tp->snd_cwnd << V_PARAM_SHIFT) - target_cwnd;
+		veno->diff = (tcp_snd_cwnd(tp) << V_PARAM_SHIFT) - target_cwnd;
 
 		if (tcp_in_slow_start(tp)) {
 			/* Slow start. */
@@ -164,15 +164,15 @@ static void tcp_veno_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 			/* In the "non-congestive state", increase cwnd
 			 * every rtt.
 			 */
-			tcp_cong_avoid_ai(tp, tp->snd_cwnd, acked);
+			tcp_cong_avoid_ai(tp, tcp_snd_cwnd(tp), acked);
 		} else {
 			/* In the "congestive state", increase cwnd
 			 * every other rtt.
 			 */
-			if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
+			if (tp->snd_cwnd_cnt >= tcp_snd_cwnd(tp)) {
 				if (veno->inc &&
-				    tp->snd_cwnd < tp->snd_cwnd_clamp) {
-					tp->snd_cwnd++;
+				    tcp_snd_cwnd(tp) < tp->snd_cwnd_clamp) {
+					tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) + 1);
 					veno->inc = 0;
 				} else
 					veno->inc = 1;
@@ -181,10 +181,10 @@ static void tcp_veno_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 				tp->snd_cwnd_cnt += acked;
 		}
 done:
-		if (tp->snd_cwnd < 2)
-			tp->snd_cwnd = 2;
-		else if (tp->snd_cwnd > tp->snd_cwnd_clamp)
-			tp->snd_cwnd = tp->snd_cwnd_clamp;
+		if (tcp_snd_cwnd(tp) < 2)
+			tcp_snd_cwnd_set(tp, 2);
+		else if (tcp_snd_cwnd(tp) > tp->snd_cwnd_clamp)
+			tcp_snd_cwnd_set(tp, tp->snd_cwnd_clamp);
 	}
 	/* Wipe the slate clean for the next rtt. */
 	/* veno->cntrtt = 0; */
@@ -199,10 +199,10 @@ static u32 tcp_veno_ssthresh(struct sock *sk)
 
 	if (veno->diff < beta)
 		/* in "non-congestive state", cut cwnd by 1/5 */
-		return max(tp->snd_cwnd * 4 / 5, 2U);
+		return max(tcp_snd_cwnd(tp) * 4 / 5, 2U);
 	else
 		/* in "congestive state", cut cwnd by 1/2 */
-		return max(tp->snd_cwnd >> 1U, 2U);
+		return max(tcp_snd_cwnd(tp) >> 1U, 2U);
 }
 
 static struct tcp_congestion_ops tcp_veno __read_mostly = {
diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c
index b2e05c4cea00..c6e97141eef2 100644
--- a/net/ipv4/tcp_westwood.c
+++ b/net/ipv4/tcp_westwood.c
@@ -244,7 +244,8 @@ static void tcp_westwood_event(struct sock *sk, enum tcp_ca_event event)
 
 	switch (event) {
 	case CA_EVENT_COMPLETE_CWR:
-		tp->snd_cwnd = tp->snd_ssthresh = tcp_westwood_bw_rttmin(sk);
+		tp->snd_ssthresh = tcp_westwood_bw_rttmin(sk);
+		tcp_snd_cwnd_set(tp, tp->snd_ssthresh);
 		break;
 	case CA_EVENT_LOSS:
 		tp->snd_ssthresh = tcp_westwood_bw_rttmin(sk);
diff --git a/net/ipv4/tcp_yeah.c b/net/ipv4/tcp_yeah.c
index 07c4c93b9fdb..18b07ff5d20e 100644
--- a/net/ipv4/tcp_yeah.c
+++ b/net/ipv4/tcp_yeah.c
@@ -71,11 +71,11 @@ static void tcp_yeah_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 
 	if (!yeah->doing_reno_now) {
 		/* Scalable */
-		tcp_cong_avoid_ai(tp, min(tp->snd_cwnd, TCP_SCALABLE_AI_CNT),
+		tcp_cong_avoid_ai(tp, min(tcp_snd_cwnd(tp), TCP_SCALABLE_AI_CNT),
 				  acked);
 	} else {
 		/* Reno */
-		tcp_cong_avoid_ai(tp, tp->snd_cwnd, acked);
+		tcp_cong_avoid_ai(tp, tcp_snd_cwnd(tp), acked);
 	}
 
 	/* The key players are v_vegas.beg_snd_una and v_beg_snd_nxt.
@@ -130,7 +130,7 @@ static void tcp_yeah_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 			/* Compute excess number of packets above bandwidth
 			 * Avoid doing full 64 bit divide.
 			 */
-			bw = tp->snd_cwnd;
+			bw = tcp_snd_cwnd(tp);
 			bw *= rtt - yeah->vegas.baseRTT;
 			do_div(bw, rtt);
 			queue = bw;
@@ -138,20 +138,20 @@ static void tcp_yeah_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 			if (queue > TCP_YEAH_ALPHA ||
 			    rtt - yeah->vegas.baseRTT > (yeah->vegas.baseRTT / TCP_YEAH_PHY)) {
 				if (queue > TCP_YEAH_ALPHA &&
-				    tp->snd_cwnd > yeah->reno_count) {
+				    tcp_snd_cwnd(tp) > yeah->reno_count) {
 					u32 reduction = min(queue / TCP_YEAH_GAMMA ,
-							    tp->snd_cwnd >> TCP_YEAH_EPSILON);
+							    tcp_snd_cwnd(tp) >> TCP_YEAH_EPSILON);
 
-					tp->snd_cwnd -= reduction;
+					tcp_snd_cwnd_set(tp, tcp_snd_cwnd(tp) - reduction);
 
-					tp->snd_cwnd = max(tp->snd_cwnd,
-							   yeah->reno_count);
+					tcp_snd_cwnd_set(tp, max(tcp_snd_cwnd(tp),
+								 yeah->reno_count));
 
-					tp->snd_ssthresh = tp->snd_cwnd;
+					tp->snd_ssthresh = tcp_snd_cwnd(tp);
 				}
 
 				if (yeah->reno_count <= 2)
-					yeah->reno_count = max(tp->snd_cwnd>>1, 2U);
+					yeah->reno_count = max(tcp_snd_cwnd(tp)>>1, 2U);
 				else
 					yeah->reno_count++;
 
@@ -176,7 +176,7 @@ static void tcp_yeah_cong_avoid(struct sock *sk, u32 ack, u32 acked)
 		 */
 		yeah->vegas.beg_snd_una  = yeah->vegas.beg_snd_nxt;
 		yeah->vegas.beg_snd_nxt  = tp->snd_nxt;
-		yeah->vegas.beg_snd_cwnd = tp->snd_cwnd;
+		yeah->vegas.beg_snd_cwnd = tcp_snd_cwnd(tp);
 
 		/* Wipe the slate clean for the next RTT. */
 		yeah->vegas.cntRTT = 0;
@@ -193,16 +193,16 @@ static u32 tcp_yeah_ssthresh(struct sock *sk)
 	if (yeah->doing_reno_now < TCP_YEAH_RHO) {
 		reduction = yeah->lastQ;
 
-		reduction = min(reduction, max(tp->snd_cwnd>>1, 2U));
+		reduction = min(reduction, max(tcp_snd_cwnd(tp)>>1, 2U));
 
-		reduction = max(reduction, tp->snd_cwnd >> TCP_YEAH_DELTA);
+		reduction = max(reduction, tcp_snd_cwnd(tp) >> TCP_YEAH_DELTA);
 	} else
-		reduction = max(tp->snd_cwnd>>1, 2U);
+		reduction = max(tcp_snd_cwnd(tp)>>1, 2U);
 
 	yeah->fast_count = 0;
 	yeah->reno_count = max(yeah->reno_count>>1, 2U);
 
-	return max_t(int, tp->snd_cwnd - reduction, 2);
+	return max_t(int, tcp_snd_cwnd(tp) - reduction, 2);
 }
 
 static struct tcp_congestion_ops tcp_yeah __read_mostly = {
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 8eedf59e9cf2..beaa0c2ada23 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2075,7 +2075,7 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
 		   jiffies_to_clock_t(icsk->icsk_rto),
 		   jiffies_to_clock_t(icsk->icsk_ack.ato),
 		   (icsk->icsk_ack.quick << 1) | inet_csk_in_pingpong_mode(sp),
-		   tp->snd_cwnd,
+		   tcp_snd_cwnd(tp),
 		   state == TCP_LISTEN ?
 			fastopenq->max_qlen :
 			(tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh)
-- 
2.35.1

[PATCH 5.15 087/247] nfp: only report pause frame configuration for physical device

[Greg Kroah-Hartman]

From: Yu Xiao <yu.xiao@corigine.com>

[ Upstream commit 0649e4d63420ebc8cbebef3e9d39e12ffc5eb9fa ]

Only report pause frame configuration for physical device. Logical
port of both PCI PF and PCI VF do not support it.

Fixes: 9fdc5d85a8fe ("nfp: update ethtool reporting of pauseframe control")
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index be1a358baadb..8b614b0201e7 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -286,8 +286,6 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
 
 	/* Init to unknowns */
 	ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
-	ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
-	ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
 	cmd->base.port = PORT_OTHER;
 	cmd->base.speed = SPEED_UNKNOWN;
 	cmd->base.duplex = DUPLEX_UNKNOWN;
@@ -295,6 +293,8 @@ nfp_net_get_link_ksettings(struct net_device *netdev,
 	port = nfp_port_from_netdev(netdev);
 	eth_port = nfp_port_get_eth_port(port);
 	if (eth_port) {
+		ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
+		ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause);
 		cmd->base.autoneg = eth_port->aneg != NFP_ANEG_DISABLED ?
 			AUTONEG_ENABLE : AUTONEG_DISABLE;
 		nfp_net_set_fec_link_mode(eth_port, cmd);
-- 
2.35.1

[PATCH 5.15 088/247] sfc: fix considering that all channels have TX queues

[Greg Kroah-Hartman]

From: Martin Habets <habetsm.xilinx@gmail.com>

[ Upstream commit 2e102b53f8a778f872dc137f4c7ac548705817aa ]

Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).

Fix efx_channel_has_tx_queues to return the correct value for this case
too.

Messages shown at probe time before the fix:
 sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
 ------------[ cut here ]------------
 netdevice: ens6f0np0: failed to initialise TXQ -1
 WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
 [...] stripped
 RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
 [...] stripped
 Call Trace:
  efx_init_tx_queue+0xaa/0xf0 [sfc]
  efx_start_channels+0x49/0x120 [sfc]
  efx_start_all+0x1f8/0x430 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xd0/0x190
  __dev_change_flags+0x1b3/0x220
  dev_change_flags+0x21/0x60
 [...] stripped

Messages shown at remove time before the fix:
 sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
 sfc 0000:03:00.0 ens6f0np0: failed to flush queues

Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Tested-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/net_driver.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index f6981810039d..bf097264d8fb 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -1533,7 +1533,7 @@ static inline bool efx_channel_is_xdp_tx(struct efx_channel *channel)
 
 static inline bool efx_channel_has_tx_queues(struct efx_channel *channel)
 {
-	return true;
+	return channel && channel->channel >= channel->efx->tx_channel_offset;
 }
 
 static inline unsigned int efx_channel_num_tx_queues(struct efx_channel *channel)
-- 
2.35.1

[PATCH 5.15 089/247] sfc: fix wrong tx channel offset with efx_separate_tx_channels

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit c308dfd1b43ef0d4c3e57b741bb3462eb7a7f4a2 ]

tx_channel_offset is calculated in efx_allocate_msix_channels, but it is
also calculated again in efx_set_channels because it was originally done
there, and when efx_allocate_msix_channels was introduced it was
forgotten to be removed from efx_set_channels.

Moreover, the old calculation is wrong when using
efx_separate_tx_channels because now we can have XDP channels after the
TX channels, so n_channels - n_tx_channels doesn't point to the first TX
channel.

Remove the old calculation from efx_set_channels, and add the
initialization of this variable if MSI or legacy interrupts are used,
next to the initialization of the rest of the related variables, where
it was missing.

Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/efx_channels.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c
index d5f2ccd3bca4..b1657e03a74f 100644
--- a/drivers/net/ethernet/sfc/efx_channels.c
+++ b/drivers/net/ethernet/sfc/efx_channels.c
@@ -308,6 +308,7 @@ int efx_probe_interrupts(struct efx_nic *efx)
 		efx->n_channels = 1;
 		efx->n_rx_channels = 1;
 		efx->n_tx_channels = 1;
+		efx->tx_channel_offset = 0;
 		efx->n_xdp_channels = 0;
 		efx->xdp_channel_offset = efx->n_channels;
 		rc = pci_enable_msi(efx->pci_dev);
@@ -328,6 +329,7 @@ int efx_probe_interrupts(struct efx_nic *efx)
 		efx->n_channels = 1 + (efx_separate_tx_channels ? 1 : 0);
 		efx->n_rx_channels = 1;
 		efx->n_tx_channels = 1;
+		efx->tx_channel_offset = 1;
 		efx->n_xdp_channels = 0;
 		efx->xdp_channel_offset = efx->n_channels;
 		efx->legacy_irq = efx->pci_dev->irq;
@@ -956,10 +958,6 @@ int efx_set_channels(struct efx_nic *efx)
 	struct efx_channel *channel;
 	int rc;
 
-	efx->tx_channel_offset =
-		efx_separate_tx_channels ?
-		efx->n_channels - efx->n_tx_channels : 0;
-
 	if (efx->xdp_tx_queue_count) {
 		EFX_WARN_ON_PARANOID(efx->xdp_tx_queues);
 
-- 
2.35.1

[PATCH 5.15 090/247] block: make bioset_exit() fully resilient against being called twice

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 605f7415ecfb426610195dd6c7577b30592b3369 ]

Most of bioset_exit() is fine being called twice, as it clears the
various allocations etc when they are freed. The exception is
bio_alloc_cache_destroy(), which does not clear ->cache when it has
freed it.

This isn't necessarily a bug, but can be if buggy users does call the
exit path more then once, or with just a memset() bioset which has
never been initialized. dm appears to be one such user.

Fixes: be4d234d7aeb ("bio: add allocation cache abstraction")
Link: https://lore.kernel.org/linux-block/YpK7m+14A+pZKs5k@casper.infradead.org/
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/bio.c b/block/bio.c
index 9b28381412d2..8381c6690dd6 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -665,6 +665,7 @@ static void bio_alloc_cache_destroy(struct bio_set *bs)
 		bio_alloc_cache_prune(cache, -1U);
 	}
 	free_percpu(bs->cache);
+	bs->cache = NULL;
 }
 
 /**
-- 
2.35.1

[PATCH 5.15 091/247] vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit

[Greg Kroah-Hartman]

From: Eli Cohen <elic@nvidia.com>

[ Upstream commit 7a6691f1f89784f775fa0c54be57533445726068 ]

In vdpa_nl_cmd_dev_get_doit(), if the call to genlmsg_reply() fails we
must not call nlmsg_free() since this is done inside genlmsg_reply().

Fix it.

Fixes: bc0d90ee021f ("vdpa: Enable user to query vdpa device info")
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/vdpa.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 12bf3d16a40f..86571498c1c2 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -558,14 +558,19 @@ static int vdpa_nl_cmd_dev_get_doit(struct sk_buff *skb, struct genl_info *info)
 		goto mdev_err;
 	}
 	err = vdpa_dev_fill(vdev, msg, info->snd_portid, info->snd_seq, 0, info->extack);
-	if (!err)
-		err = genlmsg_reply(msg, info);
+	if (err)
+		goto mdev_err;
+
+	err = genlmsg_reply(msg, info);
+	put_device(dev);
+	mutex_unlock(&vdpa_dev_mutex);
+	return err;
+
 mdev_err:
 	put_device(dev);
 err:
 	mutex_unlock(&vdpa_dev_mutex);
-	if (err)
-		nlmsg_free(msg);
+	nlmsg_free(msg);
 	return err;
 }
 
-- 
2.35.1

[PATCH 5.15 092/247] virtio: pci: Fix an error handling path in vp_modern_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 7a836a2aba09479c8e71fa43249eecc4af945f61 ]

If an error occurs after a successful pci_request_selected_regions() call,
it should be undone by a corresponding pci_release_selected_regions() call,
as already done in vp_modern_remove().

Fixes: fd502729fbbf ("virtio-pci: introduce modern device module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <237109725aad2c3c03d14549f777b1927c84b045.1648977064.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_pci_modern_dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/virtio/virtio_pci_modern_dev.c b/drivers/virtio/virtio_pci_modern_dev.c
index e11ed748e661..9ab66e44738e 100644
--- a/drivers/virtio/virtio_pci_modern_dev.c
+++ b/drivers/virtio/virtio_pci_modern_dev.c
@@ -340,6 +340,7 @@ int vp_modern_probe(struct virtio_pci_modern_device *mdev)
 err_map_isr:
 	pci_iounmap(pci_dev, mdev->common);
 err_map_common:
+	pci_release_selected_regions(pci_dev, mdev->modern_bars);
 	return err;
 }
 EXPORT_SYMBOL_GPL(vp_modern_probe);
-- 
2.35.1

[PATCH 5.15 093/247] net/mlx5: Dont use already freed action pointer

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 80b2bd737d0e833e6a2b77e482e5a714a79c86a4 ]

The call to mlx5dr_action_destroy() releases "action" memory. That
pointer is set to miss_action later and generates the following smatch
error:

 drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c:53 set_miss_action()
 warn: 'action' was already freed.

Make sure that the pointer is always valid by setting NULL after destroy.

Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
index ae4597118f8b..0553ee1fe80a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
@@ -43,11 +43,10 @@ static int set_miss_action(struct mlx5_flow_root_namespace *ns,
 	err = mlx5dr_table_set_miss_action(ft->fs_dr_table.dr_table, action);
 	if (err && action) {
 		err = mlx5dr_action_destroy(action);
-		if (err) {
-			action = NULL;
-			mlx5_core_err(ns->dev, "Failed to destroy action (%d)\n",
-				      err);
-		}
+		if (err)
+			mlx5_core_err(ns->dev,
+				      "Failed to destroy action (%d)\n", err);
+		action = NULL;
 	}
 	ft->fs_dr_table.miss_action = action;
 	if (old_miss_action) {
-- 
2.35.1

[PATCH 5.15 094/247] net/mlx5e: TC NIC mode, fix tc chains miss table

[Greg Kroah-Hartman]

From: Maor Dickman <maord@nvidia.com>

[ Upstream commit 66cb64e292d21588bdb831f08a7ec0ff04d6380d ]

The cited commit changed promisc table to be created on demand with the
highest priority in the NIC table replacing the vlan table, this caused
tc NIC tables miss flow to skip the prmoisc table because it use vlan
table as miss table.

OVS offload in NIC mode use promisc by default so any unicast packet
which will be handled by tc NIC tables miss flow will skip the promisc
rule and will be dropped.

Fix this by adding new empty table in new tc level with low priority and
point the nic tc chain miss to it, the new table is managed so it will
point to vlan table if promisc is disabled and to promisc table if enabled.

Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en/fs.h   |  2 +
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 38 ++++++++++++++++++-
 .../net/ethernet/mellanox/mlx5/core/fs_core.c |  2 +-
 3 files changed, 39 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h b/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
index a88a1a48229f..d634c034a419 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
@@ -12,6 +12,7 @@ struct mlx5e_post_act;
 enum {
 	MLX5E_TC_FT_LEVEL = 0,
 	MLX5E_TC_TTC_FT_LEVEL,
+	MLX5E_TC_MISS_LEVEL,
 };
 
 struct mlx5e_tc_table {
@@ -20,6 +21,7 @@ struct mlx5e_tc_table {
 	 */
 	struct mutex			t_lock;
 	struct mlx5_flow_table		*t;
+	struct mlx5_flow_table		*miss_t;
 	struct mlx5_fs_chains           *chains;
 	struct mlx5e_post_act		*post_act;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 60a4ac0ca76d..3aa8d0b83d10 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -4993,6 +4993,33 @@ static int mlx5e_tc_nic_get_ft_size(struct mlx5_core_dev *dev)
 	return tc_tbl_size;
 }
 
+static int mlx5e_tc_nic_create_miss_table(struct mlx5e_priv *priv)
+{
+	struct mlx5_flow_table **ft = &priv->fs.tc.miss_t;
+	struct mlx5_flow_table_attr ft_attr = {};
+	struct mlx5_flow_namespace *ns;
+	int err = 0;
+
+	ft_attr.max_fte = 1;
+	ft_attr.autogroup.max_num_groups = 1;
+	ft_attr.level = MLX5E_TC_MISS_LEVEL;
+	ft_attr.prio = 0;
+	ns = mlx5_get_flow_namespace(priv->mdev, MLX5_FLOW_NAMESPACE_KERNEL);
+
+	*ft = mlx5_create_auto_grouped_flow_table(ns, &ft_attr);
+	if (IS_ERR(*ft)) {
+		err = PTR_ERR(*ft);
+		netdev_err(priv->netdev, "failed to create tc nic miss table err=%d\n", err);
+	}
+
+	return err;
+}
+
+static void mlx5e_tc_nic_destroy_miss_table(struct mlx5e_priv *priv)
+{
+	mlx5_destroy_flow_table(priv->fs.tc.miss_t);
+}
+
 int mlx5e_tc_nic_init(struct mlx5e_priv *priv)
 {
 	struct mlx5e_tc_table *tc = &priv->fs.tc;
@@ -5025,19 +5052,23 @@ int mlx5e_tc_nic_init(struct mlx5e_priv *priv)
 	}
 	tc->mapping = chains_mapping;
 
+	err = mlx5e_tc_nic_create_miss_table(priv);
+	if (err)
+		goto err_chains;
+
 	if (MLX5_CAP_FLOWTABLE_NIC_RX(priv->mdev, ignore_flow_level))
 		attr.flags = MLX5_CHAINS_AND_PRIOS_SUPPORTED |
 			MLX5_CHAINS_IGNORE_FLOW_LEVEL_SUPPORTED;
 	attr.ns = MLX5_FLOW_NAMESPACE_KERNEL;
 	attr.max_ft_sz = mlx5e_tc_nic_get_ft_size(dev);
 	attr.max_grp_num = MLX5E_TC_TABLE_NUM_GROUPS;
-	attr.default_ft = mlx5e_vlan_get_flowtable(priv->fs.vlan);
+	attr.default_ft = priv->fs.tc.miss_t;
 	attr.mapping = chains_mapping;
 
 	tc->chains = mlx5_chains_create(dev, &attr);
 	if (IS_ERR(tc->chains)) {
 		err = PTR_ERR(tc->chains);
-		goto err_chains;
+		goto err_miss;
 	}
 
 	tc->post_act = mlx5e_tc_post_act_init(priv, tc->chains, MLX5_FLOW_NAMESPACE_KERNEL);
@@ -5060,6 +5091,8 @@ int mlx5e_tc_nic_init(struct mlx5e_priv *priv)
 	mlx5_tc_ct_clean(tc->ct);
 	mlx5e_tc_post_act_destroy(tc->post_act);
 	mlx5_chains_destroy(tc->chains);
+err_miss:
+	mlx5e_tc_nic_destroy_miss_table(priv);
 err_chains:
 	mapping_destroy(chains_mapping);
 err_mapping:
@@ -5100,6 +5133,7 @@ void mlx5e_tc_nic_cleanup(struct mlx5e_priv *priv)
 	mlx5e_tc_post_act_destroy(tc->post_act);
 	mapping_destroy(tc->mapping);
 	mlx5_chains_destroy(tc->chains);
+	mlx5e_tc_nic_destroy_miss_table(priv);
 }
 
 int mlx5e_tc_esw_init(struct rhashtable *tc_ht)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index a197dd7ca73b..379130ed300c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -113,7 +113,7 @@
 #define KERNEL_MIN_LEVEL (KERNEL_NIC_PRIO_NUM_LEVELS + 1)
 
 #define KERNEL_NIC_TC_NUM_PRIOS  1
-#define KERNEL_NIC_TC_NUM_LEVELS 2
+#define KERNEL_NIC_TC_NUM_LEVELS 3
 
 #define ANCHOR_NUM_LEVELS 1
 #define ANCHOR_NUM_PRIOS 1
-- 
2.35.1

[PATCH 5.15 095/247] net/mlx5: CT: Fix header-rewrite re-use for tupels

[Greg Kroah-Hartman]

From: Paul Blakey <paulb@nvidia.com>

[ Upstream commit 1f2856cde64baa78475e6d3c601fb7b7f693a161 ]

Tuple entries that don't have nat configured for them
which are added to the ct nat table will always create
a new modify header, as we don't check for possible
re-use on them. The same for tuples that have nat configured
for them but are added to ct table.

Fix the above by only avoiding wasteful re-use lookup
for actually natted entries in ct nat table.

Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/mellanox/mlx5/core/en/tc_ct.c    | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
index d4b7b4d73b08..94200f2dd92b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
@@ -650,7 +650,7 @@ mlx5_tc_ct_entry_create_mod_hdr(struct mlx5_tc_ct_priv *ct_priv,
 				struct mlx5_flow_attr *attr,
 				struct flow_rule *flow_rule,
 				struct mlx5e_mod_hdr_handle **mh,
-				u8 zone_restore_id, bool nat)
+				u8 zone_restore_id, bool nat_table, bool has_nat)
 {
 	struct mlx5e_tc_mod_hdr_acts mod_acts = {};
 	struct flow_action_entry *meta;
@@ -665,11 +665,12 @@ mlx5_tc_ct_entry_create_mod_hdr(struct mlx5_tc_ct_priv *ct_priv,
 				     &attr->ct_attr.ct_labels_id);
 	if (err)
 		return -EOPNOTSUPP;
-	if (nat) {
-		err = mlx5_tc_ct_entry_create_nat(ct_priv, flow_rule,
-						  &mod_acts);
-		if (err)
-			goto err_mapping;
+	if (nat_table) {
+		if (has_nat) {
+			err = mlx5_tc_ct_entry_create_nat(ct_priv, flow_rule, &mod_acts);
+			if (err)
+				goto err_mapping;
+		}
 
 		ct_state |= MLX5_CT_STATE_NAT_BIT;
 	}
@@ -684,7 +685,7 @@ mlx5_tc_ct_entry_create_mod_hdr(struct mlx5_tc_ct_priv *ct_priv,
 	if (err)
 		goto err_mapping;
 
-	if (nat) {
+	if (nat_table && has_nat) {
 		attr->modify_hdr = mlx5_modify_header_alloc(ct_priv->dev, ct_priv->ns_type,
 							    mod_acts.num_actions,
 							    mod_acts.actions);
@@ -752,7 +753,9 @@ mlx5_tc_ct_entry_add_rule(struct mlx5_tc_ct_priv *ct_priv,
 
 	err = mlx5_tc_ct_entry_create_mod_hdr(ct_priv, attr, flow_rule,
 					      &zone_rule->mh,
-					      zone_restore_id, nat);
+					      zone_restore_id,
+					      nat,
+					      mlx5_tc_ct_entry_has_nat(entry));
 	if (err) {
 		ct_dbg("Failed to create ct entry mod hdr");
 		goto err_mod_hdr;
-- 
2.35.1

[PATCH 5.15 096/247] net/mlx5: correct ECE offset in query qp output

[Greg Kroah-Hartman]

From: Changcheng Liu <jerrliu@nvidia.com>

[ Upstream commit 3fc2a9e89b3508a5cc0c324f26d7b4740ba8c456 ]

ECE field should be after opt_param_mask in query qp output.

Fixes: 6b646a7e4af6 ("net/mlx5: Add ability to read and write ECE options")
Signed-off-by: Changcheng Liu <jerrliu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index fdf4589ab4d4..cd9d1c95129e 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -5028,12 +5028,11 @@ struct mlx5_ifc_query_qp_out_bits {
 
 	u8         syndrome[0x20];
 
-	u8         reserved_at_40[0x20];
-	u8         ece[0x20];
+	u8         reserved_at_40[0x40];
 
 	u8         opt_param_mask[0x20];
 
-	u8         reserved_at_a0[0x20];
+	u8         ece[0x20];
 
 	struct mlx5_ifc_qpc_bits qpc;
 
-- 
2.35.1

[PATCH 5.15 097/247] net/mlx5e: Update netdev features after changing XDP state

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit f6279f113ad593971999c877eb69dc3d36a75894 ]

Some features (LRO, HW GRO) conflict with XDP. If there is an attempt to
enable such features while XDP is active, they will be set to `off
[requested on]`. In order to activate these features after XDP is turned
off, the driver needs to call netdev_update_features(). This commit adds
this missing call after XDP state changes.

Fixes: cf6e34c8c22f ("net/mlx5e: Properly block LRO when XDP is enabled")
Fixes: b0617e7b3500 ("net/mlx5e: Properly block HW GRO when XDP is enabled")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 7efb898e9f96..e00648094fc2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4181,6 +4181,11 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 
 unlock:
 	mutex_unlock(&priv->state_lock);
+
+	/* Need to fix some features. */
+	if (!err)
+		netdev_update_features(netdev);
+
 	return err;
 }
 
-- 
2.35.1

[PATCH 5.15 098/247] net: sched: add barrier to fix packet stuck problem for lockless qdisc

[Greg Kroah-Hartman]

From: Guoju Fang <gjfang@linux.alibaba.com>

[ Upstream commit 2e8728c955ce0624b958eee6e030a37aca3a5d86 ]

In qdisc_run_end(), the spin_unlock() only has store-release semantic,
which guarantees all earlier memory access are visible before it. But
the subsequent test_bit() has no barrier semantics so may be reordered
ahead of the spin_unlock(). The store-load reordering may cause a packet
stuck problem.

The concurrent operations can be described as below,
         CPU 0                      |          CPU 1
   qdisc_run_end()                  |     qdisc_run_begin()
          .                         |           .
 ----> /* may be reorderd here */   |           .
|         .                         |           .
|     spin_unlock()                 |         set_bit()
|         .                         |         smp_mb__after_atomic()
 ---- test_bit()                    |         spin_trylock()
          .                         |          .

Consider the following sequence of events:
    CPU 0 reorder test_bit() ahead and see MISSED = 0
    CPU 1 calls set_bit()
    CPU 1 calls spin_trylock() and return fail
    CPU 0 executes spin_unlock()

At the end of the sequence, CPU 0 calls spin_unlock() and does nothing
because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one
take it, until the next cpu pushing to the qdisc (if ever ...) will
notice and dequeue it.

This patch fix this by adding one explicit barrier. As spin_unlock() and
test_bit() ordering is a store-load ordering, a full memory barrier
smp_mb() is needed here.

Fixes: a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Guoju Fang <gjfang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sch_generic.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 9e9ff13adda8..1958d1260fe9 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -202,6 +202,12 @@ static inline void qdisc_run_end(struct Qdisc *qdisc)
 	if (qdisc->flags & TCQ_F_NOLOCK) {
 		spin_unlock(&qdisc->seqlock);
 
+		/* spin_unlock() only has store-release semantic. The unlock
+		 * and test_bit() ordering is a store-load ordering, so a full
+		 * memory barrier is needed here.
+		 */
+		smp_mb();
+
 		if (unlikely(test_bit(__QDISC_STATE_MISSED,
 				      &qdisc->state)))
 			__netif_schedule(qdisc);
-- 
2.35.1

[PATCH 5.15 099/247] tcp: tcp_rtx_synack() can be called from process context

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0a375c822497ed6ad6b5da0792a12a6f1af10c0b ]

Laurent reported the enclosed report [1]

This bug triggers with following coditions:

0) Kernel built with CONFIG_DEBUG_PREEMPT=y

1) A new passive FastOpen TCP socket is created.
   This FO socket waits for an ACK coming from client to be a complete
   ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
   release_sock() dance.
3) While the socket is owned by the user in step 2),
   a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
   in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.

Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.

Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.

[1]
BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180
caller is tcp_rtx_synack.part.0+0x36/0xc0
CPU: 10 PID: 2180 Comm: epollpep Tainted: G           OE     5.16.0-0.bpo.4-amd64 #1  Debian 5.16.12-1~bpo11+1
Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021
Call Trace:
 <TASK>
 dump_stack_lvl+0x48/0x5e
 check_preemption_disabled+0xde/0xe0
 tcp_rtx_synack.part.0+0x36/0xc0
 tcp_rtx_synack+0x8d/0xa0
 ? kmem_cache_alloc+0x2e0/0x3e0
 ? apparmor_file_alloc_security+0x3b/0x1f0
 inet_rtx_syn_ack+0x16/0x30
 tcp_check_req+0x367/0x610
 tcp_rcv_state_process+0x91/0xf60
 ? get_nohz_timer_target+0x18/0x1a0
 ? lock_timer_base+0x61/0x80
 ? preempt_count_add+0x68/0xa0
 tcp_v4_do_rcv+0xbd/0x270
 __release_sock+0x6d/0xb0
 release_sock+0x2b/0x90
 sock_setsockopt+0x138/0x1140
 ? __sys_getsockname+0x7e/0xc0
 ? aa_sk_perm+0x3e/0x1a0
 __sys_setsockopt+0x198/0x1e0
 __x64_sys_setsockopt+0x21/0x30
 do_syscall_64+0x38/0xc0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_output.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index ed7125a47ce0..dc3b4668fcde 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -4116,8 +4116,8 @@ int tcp_rtx_synack(const struct sock *sk, struct request_sock *req)
 	res = af_ops->send_synack(sk, NULL, &fl, req, NULL, TCP_SYNACK_NORMAL,
 				  NULL);
 	if (!res) {
-		__TCP_INC_STATS(sock_net(sk), TCP_MIB_RETRANSSEGS);
-		__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSYNRETRANS);
+		TCP_INC_STATS(sock_net(sk), TCP_MIB_RETRANSSEGS);
+		NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSYNRETRANS);
 		if (unlikely(tcp_passive_fastopen(sk)))
 			tcp_sk(sk)->total_retrans++;
 		trace_tcp_retransmit_synack(sk, req);
-- 
2.35.1

[PATCH 5.15 100/247] vdpa: ifcvf: set pci driver data in probe

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit bd8bb9aed56b1814784a975e2dfea12a9adcee92 ]

We should set the pci driver data in probe instead of the vdpa device
adding callback. Otherwise if no vDPA device is created we will lose
the pointer to the management device.

Fixes: 6b5df347c6482 ("vDPA/ifcvf: implement management netlink framework for ifcvf")
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220524055557.1938-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/ifcvf/ifcvf_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index 003530b19b4e..4fe8aa13ac68 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -505,7 +505,6 @@ static int ifcvf_vdpa_dev_add(struct vdpa_mgmt_dev *mdev, const char *name)
 	}
 
 	ifcvf_mgmt_dev->adapter = adapter;
-	pci_set_drvdata(pdev, ifcvf_mgmt_dev);
 
 	vf = &adapter->vf;
 	vf->dev_type = get_dev_type(pdev);
@@ -620,6 +619,8 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err;
 	}
 
+	pci_set_drvdata(pdev, ifcvf_mgmt_dev);
+
 	return 0;
 
 err:
-- 
2.35.1

[PATCH 5.15 101/247] octeontx2-af: fix error code in is_valid_offset()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f3d671c711097a133bc36bd2bde52f1fcca783a6 ]

The is_valid_offset() function returns success/true if the call to
validate_and_get_cpt_blkaddr() fails.

Fixes: ecad2ce8c48f ("octeontx2-af: cn10k: Add mailbox to configure reassembly timeout")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YpXDrTPb8qV01JSP@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
index 1f90a7403392..4895faa667b5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
@@ -206,7 +206,7 @@ static bool is_valid_offset(struct rvu *rvu, struct cpt_rd_wr_reg_msg *req)
 
 	blkaddr = validate_and_get_cpt_blkaddr(req->blkaddr);
 	if (blkaddr < 0)
-		return blkaddr;
+		return false;
 
 	/* Registers that can be accessed from PF/VF */
 	if ((offset & 0xFF000) ==  CPT_AF_LFX_CTL(0) ||
-- 
2.35.1

[PATCH 5.15 102/247] s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag

[Greg Kroah-Hartman]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit 29ccaa4b35ea874ddd50518e5c2c746b9238a792 ]

Commit d768bd892fc8 ("s390: add options to change branch prediction
behaviour for the kernel") introduced .Lsie_exit label - supposedly
to fence off SIE instruction. However, the corresponding address
range length .Lsie_crit_mcck_length was not updated, which led to
BPON code potentionally marked with CIF_MCCK_GUEST flag.

Both .Lsie_exit and .Lsie_crit_mcck_length were removed with commit
0b0ed657fe00 ("s390: remove critical section cleanup from entry.S"),
but the issue persisted - currently BPOFF and BPENTER macros might
get wrongly considered by the machine check handler as a guest.

Fixes: d768bd892fc8 ("s390: add options to change branch prediction behaviour for the kernel")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/entry.S | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 4c9b967290ae..d530eb4dc413 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -248,6 +248,10 @@ ENTRY(sie64a)
 	BPEXIT	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
 .Lsie_entry:
 	sie	0(%r14)
+# Let the next instruction be NOP to avoid triggering a machine check
+# and handling it in a guest as result of the instruction execution.
+	nopr	7
+.Lsie_leave:
 	BPOFF
 	BPENTER	__SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
 .Lsie_skip:
@@ -536,7 +540,7 @@ ENTRY(mcck_int_handler)
 	jno	.Lmcck_panic
 #if IS_ENABLED(CONFIG_KVM)
 	OUTSIDE	%r9,.Lsie_gmap,.Lsie_done,6f
-	OUTSIDE	%r9,.Lsie_entry,.Lsie_skip,4f
+	OUTSIDE	%r9,.Lsie_entry,.Lsie_leave,4f
 	oi	__LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
 	j	5f
 4:	CHKSTG	.Lmcck_panic
-- 
2.35.1

[PATCH 5.15 103/247] regulator: mt6315-regulator: fix invalid allowed mode

[Greg Kroah-Hartman]

From: Fabien Parent <fparent@baylibre.com>

[ Upstream commit 28cbc2d4c54c09a427b18a1604740efb6b2cc2d6 ]

In the binding example, the regulator mode 4 is shown as a valid mode,
but the driver actually only support mode 0 to 2:

This generates an error in dmesg when copy/pasting the binding example:
[    0.306080] vbuck1: invalid regulator-allowed-modes element 4
[    0.307290] vbuck2: invalid regulator-allowed-modes element 4

This commit fixes this error by removing the invalid mode from the
examples.

Fixes: 977fb5b58469 ("regulator: document binding for MT6315 regulator")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220529154613.337559-1-fparent@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/regulator/mt6315-regulator.yaml       | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 5d2d989de893..37402c370fbb 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -55,7 +55,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
 
         vbuck3 {
@@ -63,7 +63,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
       };
     };
-- 
2.35.1

[PATCH 5.15 104/247] gpio: pca953x: use the correct register address to do regcache sync

[Greg Kroah-Hartman]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit 43624eda86c98b0de726d0b6f2516ccc3ef7313f ]

For regcache_sync_region, need to use pca953x_recalc_addr() to get
the real register address.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 8726921a1129..33683295a0bf 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -1108,20 +1108,21 @@ static int pca953x_regcache_sync(struct device *dev)
 {
 	struct pca953x_chip *chip = dev_get_drvdata(dev);
 	int ret;
+	u8 regaddr;
 
 	/*
 	 * The ordering between direction and output is important,
 	 * sync these registers first and only then sync the rest.
 	 */
-	ret = regcache_sync_region(chip->regmap, chip->regs->direction,
-				   chip->regs->direction + NBANK(chip));
+	regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
 	if (ret) {
 		dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
 		return ret;
 	}
 
-	ret = regcache_sync_region(chip->regmap, chip->regs->output,
-				   chip->regs->output + NBANK(chip));
+	regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
 	if (ret) {
 		dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
 		return ret;
@@ -1129,16 +1130,18 @@ static int pca953x_regcache_sync(struct device *dev)
 
 #ifdef CONFIG_GPIO_PCA953X_IRQ
 	if (chip->driver_data & PCA_PCAL) {
-		ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
-					   PCAL953X_IN_LATCH + NBANK(chip));
+		regaddr = pca953x_recalc_addr(chip, PCAL953X_IN_LATCH, 0);
+		ret = regcache_sync_region(chip->regmap, regaddr,
+					   regaddr + NBANK(chip));
 		if (ret) {
 			dev_err(dev, "Failed to sync INT latch registers: %d\n",
 				ret);
 			return ret;
 		}
 
-		ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
-					   PCAL953X_INT_MASK + NBANK(chip));
+		regaddr = pca953x_recalc_addr(chip, PCAL953X_INT_MASK, 0);
+		ret = regcache_sync_region(chip->regmap, regaddr,
+					   regaddr + NBANK(chip));
 		if (ret) {
 			dev_err(dev, "Failed to sync INT mask registers: %d\n",
 				ret);
-- 
2.35.1

[PATCH 5.15 105/247] afs: Fix infinite loop found by xfstest generic/676

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 17eabd42560f4636648ad65ba5b20228071e2363 ]

In AFS, a directory is handled as a file that the client downloads and
parses locally for the purposes of performing lookup and getdents
operations.  The in-kernel afs filesystem has a number of functions that
do this.

A directory file is arranged as a series of 2K blocks divided into
32-byte slots, where a directory entry occupies one or more slots, plus
each block starts with one or more metadata blocks.

When parsing a block, if the last slots are occupied by a dirent that
occupies more than a single slot and the file position points at a slot
that's not the initial one, the logic in afs_dir_iterate_block() that
skips over it won't advance the file pointer to the end of it.  This
will cause an infinite loop in getdents() as it will keep retrying that
block and failing to advance beyond the final entry.

Fix this by advancing the file pointer if the next entry will be beyond
it when we skip a block.

This was found by the generic/676 xfstest but can also be triggered with
something like:

	~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 4579bbda4634..948a808a964d 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -486,8 +486,11 @@ static int afs_dir_iterate_block(struct afs_vnode *dvnode,
 		}
 
 		/* skip if starts before the current position */
-		if (offset < curr)
+		if (offset < curr) {
+			if (next > curr)
+				ctx->pos = blkoff + next * sizeof(union afs_xdr_dirent);
 			continue;
+		}
 
 		/* found the next entry */
 		if (!dir_emit(ctx, dire->u.name, nlen,
-- 
2.35.1

[PATCH 5.15 106/247] scsi: sd: Fix potential NULL pointer dereference

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

[ Upstream commit 05fbde3a77a4f1d62e4c4428f384288c1f1a0be5 ]

If sd_probe() sees an early error before sdkp->device is initialized,
sd_zbc_release_disk() is called. This causes a NULL pointer dereference
when sd_is_zoned() is called inside that function. Avoid this by removing
the call to sd_zbc_release_disk() in sd_probe() error path.

This change is safe and does not result in zone information memory leakage
because the zone information for a zoned disk is allocated only when
sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set,
resulting in sd_disk_release() being called when needed to cleanup a disk
zone information using sd_zbc_release_disk().

Link: https://lore.kernel.org/r/20220601062544.905141-2-damien.lemoal@opensource.wdc.com
Fixes: 89d947561077 ("sd: Implement support for ZBC devices")
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sd.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a713babaee0f..de6640ad1943 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3480,7 +3480,6 @@ static int sd_probe(struct device *dev)
  out_put:
 	put_disk(gd);
  out_free:
-	sd_zbc_release_disk(sdkp);
 	kfree(sdkp);
  out:
 	scsi_autopm_put_device(sdp);
-- 
2.35.1

[PATCH 5.15 107/247] tipc: check attribute length for bearer name

[Greg Kroah-Hartman]

From: Hoang Le <hoang.h.le@dektech.com.au>

[ Upstream commit 7f36f798f89bf32c0164049cb0e3fd1af613d0bb ]

syzbot reported uninit-value:
=====================================================
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline]
BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725
 string_nocheck lib/vsprintf.c:644 [inline]
 string+0x4f9/0x6f0 lib/vsprintf.c:725
 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283
 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50
 _printk+0x18d/0x1cf kernel/printk/printk.c:2293
 tipc_enable_bearer net/tipc/bearer.c:371 [inline]
 __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033
 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042
 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline]

- Do sanity check the attribute length for TIPC_NLA_BEARER_NAME.
- Do not use 'illegal name' in printing message.

Reported-by: syzbot+e820fdc8ce362f2dea51@syzkaller.appspotmail.com
Fixes: cb30a63384bc ("tipc: refactor function tipc_enable_bearer()")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220602063053.5892-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 36b466cfd9e1..b0ad61b4b101 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -259,9 +259,8 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 	u32 i;
 
 	if (!bearer_name_validate(name, &b_names)) {
-		errstr = "illegal name";
 		NL_SET_ERR_MSG(extack, "Illegal name");
-		goto rejected;
+		return res;
 	}
 
 	if (prio > TIPC_MAX_LINK_PRI && prio != TIPC_MEDIA_LINK_PRI) {
-- 
2.35.1

[PATCH 5.15 108/247] driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction

[Greg Kroah-Hartman]

From: Saravana Kannan <saravanak@google.com>

[ Upstream commit 5ee76c256e928455212ab759c51d198fedbe7523 ]

Mounting NFS rootfs was timing out when deferred_probe_timeout was
non-zero [1].  This was because ip_auto_config() initcall times out
waiting for the network interfaces to show up when
deferred_probe_timeout was non-zero. While ip_auto_config() calls
wait_for_device_probe() to make sure any currently running deferred
probe work or asynchronous probe finishes, that wasn't sufficient to
account for devices being deferred until deferred_probe_timeout.

Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") tried to fix that by making
sure wait_for_device_probe() waits for deferred_probe_timeout to expire
before returning.

However, if wait_for_device_probe() is called from the kernel_init()
context:

- Before deferred_probe_initcall() [2], it causes the boot process to
  hang due to a deadlock.

- After deferred_probe_initcall() [3], it blocks kernel_init() from
  continuing till deferred_probe_timeout expires and beats the point of
  deferred_probe_timeout that's trying to wait for userspace to load
  modules.

Neither of this is good. So revert the changes to
wait_for_device_probe().

[1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/
[2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/
[3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/

Fixes: 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires")
Cc: John Stultz <jstultz@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-pm@vger.kernel.org
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220526034609.480766-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/dd.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index a480004b9897..76ded601d0c1 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -257,7 +257,6 @@ DEFINE_SHOW_ATTRIBUTE(deferred_devs);
 
 int driver_deferred_probe_timeout;
 EXPORT_SYMBOL_GPL(driver_deferred_probe_timeout);
-static DECLARE_WAIT_QUEUE_HEAD(probe_timeout_waitqueue);
 
 static int __init deferred_probe_timeout_setup(char *str)
 {
@@ -312,7 +311,6 @@ static void deferred_probe_timeout_work_func(struct work_struct *work)
 	list_for_each_entry(p, &deferred_probe_pending_list, deferred_probe)
 		dev_info(p->device, "deferred probe pending\n");
 	mutex_unlock(&deferred_probe_mutex);
-	wake_up_all(&probe_timeout_waitqueue);
 }
 static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);
 
@@ -719,9 +717,6 @@ int driver_probe_done(void)
  */
 void wait_for_device_probe(void)
 {
-	/* wait for probe timeout */
-	wait_event(probe_timeout_waitqueue, !driver_deferred_probe_timeout);
-
 	/* wait for the deferred probe workqueue to finish */
 	flush_work(&deferred_probe_work);
 
-- 
2.35.1

[PATCH 5.15 109/247] perf c2c: Fix sorting in percent_rmt_hitm_cmp()

[Greg Kroah-Hartman]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ]

The function percent_rmt_hitm_cmp() wrongly uses local HITMs for
sorting remote HITMs.

Since this function is to sort cache lines for remote HITMs, this patch
changes to use 'rmt_hitm' field for correct sorting.

Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-c2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 1fb0c507a551..e6f900c3accb 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -924,8 +924,8 @@ percent_rmt_hitm_cmp(struct perf_hpp_fmt *fmt __maybe_unused,
 	double per_left;
 	double per_right;
 
-	per_left  = PERCENT(left, lcl_hitm);
-	per_right = PERCENT(right, lcl_hitm);
+	per_left  = PERCENT(left, rmt_hitm);
+	per_right = PERCENT(right, rmt_hitm);
 
 	return per_left - per_right;
 }
-- 
2.35.1

[PATCH 5.15 110/247] dmaengine: idxd: set DMA_INTERRUPT cap bit

[Greg Kroah-Hartman]

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit 4e5a4eb20393b851590b4465f1197a8041c2076b ]

Even though idxd driver has always supported interrupt, it never actually
set the DMA_INTERRUPT cap bit. Rectify this mistake so the interrupt
capability is advertised.

Reported-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971497859.2201379.17925303210723708961.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/idxd/dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/idxd/dma.c b/drivers/dma/idxd/dma.c
index c39e9483206a..acb5681e25ed 100644
--- a/drivers/dma/idxd/dma.c
+++ b/drivers/dma/idxd/dma.c
@@ -181,6 +181,7 @@ int idxd_register_dma_device(struct idxd_device *idxd)
 	INIT_LIST_HEAD(&dma->channels);
 	dma->dev = dev;
 
+	dma_cap_set(DMA_INTERRUPT, dma->cap_mask);
 	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
 	dma_cap_set(DMA_COMPLETION_NO_ORDER, dma->cap_mask);
 	dma->device_release = idxd_dma_release;
-- 
2.35.1

[PATCH 5.15 111/247] mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

[Greg Kroah-Hartman]

From: Gong Yuanjun <ruc_gongyuanjun@163.com>

[ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ]

Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().

Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/mips-cpc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 8d2535123f11..d005be84c482 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -27,6 +27,7 @@ phys_addr_t __weak mips_cpc_default_phys_base(void)
 	cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc");
 	if (cpc_node) {
 		err = of_address_to_resource(cpc_node, 0, &res);
+		of_node_put(cpc_node);
 		if (!err)
 			return res.start;
 	}
-- 
2.35.1

[PATCH 5.15 112/247] bootconfig: Make the bootconfig.o as a normal object file

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 6014a23638cdee63a71ef13c51d7c563eb5829ee ]

Since the APIs defined in the bootconfig.o are not individually used,
it is meaningless to build it as library by lib-y. Use obj-y for that.

Link: https://lkml.kernel.org/r/164921225875.1090670.15565363126983098971.stgit@devnote2

Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/Makefile b/lib/Makefile
index a841be5244ac..6cf97c60b00b 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -275,7 +275,7 @@ $(foreach file, $(libfdt_files), \
 	$(eval CFLAGS_$(file) = -I $(srctree)/scripts/dtc/libfdt))
 lib-$(CONFIG_LIBFDT) += $(libfdt_files)
 
-lib-$(CONFIG_BOOT_CONFIG) += bootconfig.o
+obj-$(CONFIG_BOOT_CONFIG) += bootconfig.o
 
 obj-$(CONFIG_RBTREE_TEST) += rbtree_test.o
 obj-$(CONFIG_INTERVAL_TREE_TEST) += interval_tree_test.o
-- 
2.35.1

[PATCH 5.15 113/247] tracing: Make tp_printk work on syscall tracepoints

[Greg Kroah-Hartman]

From: Jeff Xie <xiehuan09@gmail.com>

[ Upstream commit cb1c45fb68b8a4285ccf750842b1136f26cfe267 ]

Currently the tp_printk option has no effect on syscall tracepoint.
When adding the kernel option parameter tp_printk, then:

echo 1 > /sys/kernel/debug/tracing/events/syscalls/enable

When running any application, no trace information is printed on the
terminal.

Now added printk for syscall tracepoints.

Link: https://lkml.kernel.org/r/20220410145025.681144-1-xiehuan09@gmail.com

Signed-off-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_syscalls.c | 35 +++++++++++------------------------
 1 file changed, 11 insertions(+), 24 deletions(-)

diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index f755bde42fd0..b69e207012c9 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -154,7 +154,7 @@ print_syscall_enter(struct trace_iterator *iter, int flags,
 			goto end;
 
 		/* parameter types */
-		if (tr->trace_flags & TRACE_ITER_VERBOSE)
+		if (tr && tr->trace_flags & TRACE_ITER_VERBOSE)
 			trace_seq_printf(s, "%s ", entry->types[i]);
 
 		/* parameter values */
@@ -296,9 +296,7 @@ static void ftrace_syscall_enter(void *data, struct pt_regs *regs, long id)
 	struct trace_event_file *trace_file;
 	struct syscall_trace_enter *entry;
 	struct syscall_metadata *sys_data;
-	struct ring_buffer_event *event;
-	struct trace_buffer *buffer;
-	unsigned int trace_ctx;
+	struct trace_event_buffer fbuffer;
 	unsigned long args[6];
 	int syscall_nr;
 	int size;
@@ -321,20 +319,16 @@ static void ftrace_syscall_enter(void *data, struct pt_regs *regs, long id)
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
-	trace_ctx = tracing_gen_ctx();
-
-	event = trace_event_buffer_lock_reserve(&buffer, trace_file,
-			sys_data->enter_event->event.type, size, trace_ctx);
-	if (!event)
+	entry = trace_event_buffer_reserve(&fbuffer, trace_file, size);
+	if (!entry)
 		return;
 
-	entry = ring_buffer_event_data(event);
+	entry = ring_buffer_event_data(fbuffer.event);
 	entry->nr = syscall_nr;
 	syscall_get_arguments(current, regs, args);
 	memcpy(entry->args, args, sizeof(unsigned long) * sys_data->nb_args);
 
-	event_trigger_unlock_commit(trace_file, buffer, event, entry,
-				    trace_ctx);
+	trace_event_buffer_commit(&fbuffer);
 }
 
 static void ftrace_syscall_exit(void *data, struct pt_regs *regs, long ret)
@@ -343,9 +337,7 @@ static void ftrace_syscall_exit(void *data, struct pt_regs *regs, long ret)
 	struct trace_event_file *trace_file;
 	struct syscall_trace_exit *entry;
 	struct syscall_metadata *sys_data;
-	struct ring_buffer_event *event;
-	struct trace_buffer *buffer;
-	unsigned int trace_ctx;
+	struct trace_event_buffer fbuffer;
 	int syscall_nr;
 
 	syscall_nr = trace_get_syscall_nr(current, regs);
@@ -364,20 +356,15 @@ static void ftrace_syscall_exit(void *data, struct pt_regs *regs, long ret)
 	if (!sys_data)
 		return;
 
-	trace_ctx = tracing_gen_ctx();
-
-	event = trace_event_buffer_lock_reserve(&buffer, trace_file,
-			sys_data->exit_event->event.type, sizeof(*entry),
-			trace_ctx);
-	if (!event)
+	entry = trace_event_buffer_reserve(&fbuffer, trace_file, sizeof(*entry));
+	if (!entry)
 		return;
 
-	entry = ring_buffer_event_data(event);
+	entry = ring_buffer_event_data(fbuffer.event);
 	entry->nr = syscall_nr;
 	entry->ret = syscall_get_return_value(current, regs);
 
-	event_trigger_unlock_commit(trace_file, buffer, event, entry,
-				    trace_ctx);
+	trace_event_buffer_commit(&fbuffer);
 }
 
 static int reg_event_syscall_enter(struct trace_event_file *file,
-- 
2.35.1

[PATCH 5.15 114/247] tracing: Fix sleeping function called from invalid context on RT kernel

[Greg Kroah-Hartman]

From: Jun Miao <jun.miao@intel.com>

[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ]

When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the
cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the
atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel,
these locks are replaced with sleepable rt-spinlock, so the stack calltrace will
be triggered.
Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start
tp_printk=1" enabled.

 BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
 preempt_count: 2, expected: 0
 RCU nest depth: 0, expected: 0
 Preemption disabled at:
 [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x60/0x8c
  dump_stack+0x10/0x12
  __might_resched.cold+0x11d/0x155
  rt_spin_lock+0x40/0x70
  trace_event_buffer_commit+0x2fa/0x4c0
  ? map_vsyscall+0x93/0x93
  trace_event_raw_event_initcall_start+0xbe/0x110
  ? perf_trace_initcall_finish+0x210/0x210
  ? probe_sched_wakeup+0x34/0x40
  ? ttwu_do_wakeup+0xda/0x310
  ? trace_hardirqs_on+0x35/0x170
  ? map_vsyscall+0x93/0x93
  do_one_initcall+0x217/0x3c0
  ? trace_event_raw_event_initcall_level+0x170/0x170
  ? push_cpu_stop+0x400/0x400
  ? cblist_init_generic+0x241/0x290
  kernel_init_freeable+0x1ac/0x347
  ? _raw_spin_unlock_irq+0x65/0x80
  ? rest_init+0xf0/0xf0
  kernel_init+0x1e/0x150
  ret_from_fork+0x22/0x30
  </TASK>

Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com

Signed-off-by: Jun Miao <jun.miao@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index b49756608f83..98b06d3ce164 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2840,7 +2840,7 @@ trace_event_buffer_lock_reserve(struct trace_buffer **current_rb,
 }
 EXPORT_SYMBOL_GPL(trace_event_buffer_lock_reserve);
 
-static DEFINE_SPINLOCK(tracepoint_iter_lock);
+static DEFINE_RAW_SPINLOCK(tracepoint_iter_lock);
 static DEFINE_MUTEX(tracepoint_printk_mutex);
 
 static void output_printk(struct trace_event_buffer *fbuffer)
@@ -2868,14 +2868,14 @@ static void output_printk(struct trace_event_buffer *fbuffer)
 
 	event = &fbuffer->trace_file->event_call->event;
 
-	spin_lock_irqsave(&tracepoint_iter_lock, flags);
+	raw_spin_lock_irqsave(&tracepoint_iter_lock, flags);
 	trace_seq_init(&iter->seq);
 	iter->ent = fbuffer->entry;
 	event_call->event.funcs->trace(iter, 0, event);
 	trace_seq_putc(&iter->seq, 0);
 	printk("%s", iter->seq.buffer);
 
-	spin_unlock_irqrestore(&tracepoint_iter_lock, flags);
+	raw_spin_unlock_irqrestore(&tracepoint_iter_lock, flags);
 }
 
 int tracepoint_printk_sysctl(struct ctl_table *table, int write,
-- 
2.35.1

[PATCH 5.15 115/247] tracing: Avoid adding tracer option before update_tracer_options

[Greg Kroah-Hartman]

From: Mark-PK Tsai <mark-pk.tsai@mediatek.com>

[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ]

To prepare for support asynchronous tracer_init_tracefs initcall,
avoid calling create_trace_option_files before __update_tracer_options.
Otherwise, create_trace_option_files will show warning because
some tracers in trace_types list are already in tr->topts.

For example, hwlat_tracer call register_tracer in late_initcall,
and global_trace.dir is already created in tracing_init_dentry,
hwlat_tracer will be put into tr->topts.
Then if the __update_tracer_options is executed after hwlat_tracer
registered, create_trace_option_files find that hwlat_tracer is
already in tr->topts.

Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com

Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 98b06d3ce164..518ce39a878d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6320,12 +6320,18 @@ static void tracing_set_nop(struct trace_array *tr)
 	tr->current_trace = &nop_trace;
 }
 
+static bool tracer_options_updated;
+
 static void add_tracer_options(struct trace_array *tr, struct tracer *t)
 {
 	/* Only enable if the directory has been created already. */
 	if (!tr->dir)
 		return;
 
+	/* Only create trace option files after update_tracer_options finish */
+	if (!tracer_options_updated)
+		return;
+
 	create_trace_option_files(tr, t);
 }
 
@@ -9146,6 +9152,7 @@ static void __update_tracer_options(struct trace_array *tr)
 static void update_tracer_options(struct trace_array *tr)
 {
 	mutex_lock(&trace_types_lock);
+	tracer_options_updated = true;
 	__update_tracer_options(tr);
 	mutex_unlock(&trace_types_lock);
 }
-- 
2.35.1

[PATCH 5.15 116/247] iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit d9ed8af1dee37f181096631fb03729ece98ba816 ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220425114136.2649310-1-yangyingliang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index 4bc75c4ce402..324e8f32962a 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -2090,11 +2090,10 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ioaddr = res->start;
-	smmu->base = devm_ioremap_resource(dev, res);
+	smmu->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(smmu->base))
 		return PTR_ERR(smmu->base);
+	ioaddr = res->start;
 	/*
 	 * The resource size should effectively match the value of SMMU_TOP;
 	 * stash that temporarily until we know PAGESIZE to validate it with.
-- 
2.35.1

[PATCH 5.15 117/247] iommu/arm-smmu-v3: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit b131fa8c1d2afd05d0b7598621114674289c2fbb ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220425114525.2651143-1-yangyingliang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 430315135cff..79edfdca6607 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -3786,6 +3786,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 
 	/* Base address */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 	if (resource_size(res) < arm_smmu_resource_size(smmu)) {
 		dev_err(dev, "MMIO region too small (%pr)\n", res);
 		return -EINVAL;
-- 
2.35.1

[PATCH 5.15 118/247] f2fs: remove WARN_ON in f2fs_is_valid_blkaddr

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit dc2f78e2d4cc844a1458653d57ce1b54d4a29f21 ]

Syzbot triggers two WARNs in f2fs_is_valid_blkaddr and
__is_bitmap_valid. For example, in f2fs_is_valid_blkaddr,
if type is DATA_GENERIC_ENHANCE or DATA_GENERIC_ENHANCE_READ,
it invokes WARN_ON if blkaddr is not in the right range.
The call trace is as follows:

 f2fs_get_node_info+0x45f/0x1070
 read_node_page+0x577/0x1190
 __get_node_page.part.0+0x9e/0x10e0
 __get_node_page
 f2fs_get_node_page+0x109/0x180
 do_read_inode
 f2fs_iget+0x2a5/0x58b0
 f2fs_fill_super+0x3b39/0x7ca0

Fix these two WARNs by replacing WARN_ON with dump_stack.

Reported-by: syzbot+763ae12a2ede1d99d4dc@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 70d898ad2d1d..f2fe4940a8cd 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -151,7 +151,7 @@ static bool __is_bitmap_valid(struct f2fs_sb_info *sbi, block_t blkaddr,
 		f2fs_err(sbi, "Inconsistent error blkaddr:%u, sit bitmap:%d",
 			 blkaddr, exist);
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
-		WARN_ON(1);
+		dump_stack();
 	}
 	return exist;
 }
@@ -189,7 +189,7 @@ bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 			f2fs_warn(sbi, "access invalid blkaddr:%u",
 				  blkaddr);
 			set_sbi_flag(sbi, SBI_NEED_FSCK);
-			WARN_ON(1);
+			dump_stack();
 			return false;
 		} else {
 			return __is_bitmap_valid(sbi, blkaddr, type);
-- 
2.35.1

[PATCH 5.15 119/247] i2c: cadence: Increase timeout per message if necessary

[Greg Kroah-Hartman]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 96789dce043f5bff8b7d62aa28d52a7c59403a84 ]

Timeout as 1 second sets an upper limit on the length
of the transfer executed, but there is no maximum length
of a write or read message set in i2c_adapter_quirks for
this controller.

This upper limit affects devices that require sending
large firmware blobs over I2C.

To remove that limitation, calculate the minimal time
necessary, plus some wiggle room, for every message and
use it instead of the default one second, if more than
one second.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-cadence.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 805c77143a0f..b4c1ad19cdae 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -760,7 +760,7 @@ static void cdns_i2c_master_reset(struct i2c_adapter *adap)
 static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
 		struct i2c_adapter *adap)
 {
-	unsigned long time_left;
+	unsigned long time_left, msg_timeout;
 	u32 reg;
 
 	id->p_msg = msg;
@@ -785,8 +785,16 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
 	else
 		cdns_i2c_msend(id);
 
+	/* Minimal time to execute this message */
+	msg_timeout = msecs_to_jiffies((1000 * msg->len * BITS_PER_BYTE) / id->i2c_clk);
+	/* Plus some wiggle room */
+	msg_timeout += msecs_to_jiffies(500);
+
+	if (msg_timeout < adap->timeout)
+		msg_timeout = adap->timeout;
+
 	/* Wait for the signal of completion */
-	time_left = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+	time_left = wait_for_completion_timeout(&id->xfer_done, msg_timeout);
 	if (time_left == 0) {
 		cdns_i2c_master_reset(adap);
 		dev_err(id->adap.dev.parent,
-- 
2.35.1

[PATCH 5.15 120/247] m68knommu: set ZERO_PAGE() to the allocated zeroed page

[Greg Kroah-Hartman]

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit dc068f46217970d9516f16cd37972a01d50dc055 ]

The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the
somewhat non-sensical value of "virt_to_page(0)". The zeroth page
is not in any way guaranteed to be a page full of "0". So the result
is that ZERO_PAGE() will almost certainly contain random values.

We already allocate a real "empty_zero_page" in the mm setup code shared
between MMU m68k and non-MMU m68k. It is just not hooked up to the
ZERO_PAGE() macro for the non-MMU m68k case.

Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer.

I am not aware of any specific issues caused by the old code.

Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t
Reported-by: Hugh Dickens <hughd@google.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/pgtable_no.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h
index 87151d67d91e..bce5ca56c388 100644
--- a/arch/m68k/include/asm/pgtable_no.h
+++ b/arch/m68k/include/asm/pgtable_no.h
@@ -42,7 +42,8 @@ extern void paging_init(void);
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+extern void *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
 /*
  * All 32bit addresses are effectively valid for vmalloc...
-- 
2.35.1

[PATCH 5.15 121/247] m68knommu: fix undefined reference to `_init_sp

[Greg Kroah-Hartman]

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit a71b9e66fee47c59b3ec34e652b5c23bc6550794 ]

When configuring a nommu classic m68k system enabling the uboot parameter
passing support (CONFIG_UBOOT) will produce the following compile error:

   m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline':
   uboot.c:(.init.text+0x32): undefined reference to `_init_sp'

The logic to support this option is only used on ColdFire based platforms
(in its head.S startup code). So make the selection of this option
depend on building for a ColdFire based platform.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/Kconfig.machine | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index eeab4f3e6c19..946853a08502 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -335,6 +335,7 @@ comment "Machine Options"
 
 config UBOOT
 	bool "Support for U-Boot command line parameters"
+	depends on COLDFIRE
 	help
 	  If you say Y here kernel will try to collect command
 	  line parameters from the initial u-boot stack.
-- 
2.35.1

[PATCH 5.15 122/247] dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type

[Greg Kroah-Hartman]

From: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>

[ Upstream commit f9a9f43a62a04ec3183fb0da9226c7706eed0115 ]

In zynqmp_dma_alloc/free_chan_resources functions there is a
potential overflow in the below expressions.

dma_alloc_coherent(chan->dev, (2 * chan->desc_size *
		   ZYNQMP_DMA_NUM_DESCS),
		   &chan->desc_pool_p, GFP_KERNEL);

dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) *
                 ZYNQMP_DMA_NUM_DESCS),
                chan->desc_pool_v, chan->desc_pool_p);

The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though
this overflow condition is not observed but it is a potential problem
in the case of 32-bit multiplication. Hence fix it by changing the
desc_size data type to size_t.

In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in
dma_alloc_coherent API argument.

Addresses-Coverity: Event overflow_before_widen.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1652166762-18317-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/zynqmp_dma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index 97f02f8eb03a..5257bdbf77fb 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -232,7 +232,7 @@ struct zynqmp_dma_chan {
 	bool is_dmacoherent;
 	struct tasklet_struct tasklet;
 	bool idle;
-	u32 desc_size;
+	size_t desc_size;
 	bool err;
 	u32 bus_width;
 	u32 src_burst_len;
@@ -489,7 +489,8 @@ static int zynqmp_dma_alloc_chan_resources(struct dma_chan *dchan)
 	}
 
 	chan->desc_pool_v = dma_alloc_coherent(chan->dev,
-					       (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS),
+					       (2 * ZYNQMP_DMA_DESC_SIZE(chan) *
+					       ZYNQMP_DMA_NUM_DESCS),
 					       &chan->desc_pool_p, GFP_KERNEL);
 	if (!chan->desc_pool_v)
 		return -ENOMEM;
-- 
2.35.1

[PATCH 5.15 123/247] NFSv4: Dont hold the layoutget locks across multiple RPC calls

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 6949493884fe88500de4af182588e071cf1544ee ]

When doing layoutget as part of the open() compound, we have to be
careful to release the layout locks before we can call any further RPC
calls, such as setattr(). The reason is that those calls could trigger
a recall, which could deadlock.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 4bed3bb75ad5..cbb39aff8182 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3108,6 +3108,10 @@ static int _nfs4_open_and_get_state(struct nfs4_opendata *opendata,
 	}
 
 out:
+	if (opendata->lgp) {
+		nfs4_lgopen_release(opendata->lgp);
+		opendata->lgp = NULL;
+	}
 	if (!opendata->cancelled)
 		nfs4_sequence_free_slot(&opendata->o_res.seq_res);
 	return ret;
-- 
2.35.1

[PATCH 5.15 124/247] video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1

[Greg Kroah-Hartman]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit c4b4d7047f16a8d138ce76da65faefb7165736f2 ]

This patch fixes a bug where GEN1 VMs doesn't allow resolutions greater
than 64 MB size (eg 7680x4320). Unnecessary PCI check limits Gen1 VRAM
to legacy PCI BAR size only (ie 64MB). Thus any, resolution requesting
greater then 64MB (eg 7680x4320) would fail. MMIO region assigning this
memory shouldn't be limited by PCI bar size.

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hyperv_fb.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index c8e0ea27caf1..58c304a3b7c4 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -1009,7 +1009,6 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 	struct pci_dev *pdev  = NULL;
 	void __iomem *fb_virt;
 	int gen2vm = efi_enabled(EFI_BOOT);
-	resource_size_t pot_start, pot_end;
 	phys_addr_t paddr;
 	int ret;
 
@@ -1060,23 +1059,7 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 	dio_fb_size =
 		screen_width * screen_height * screen_depth / 8;
 
-	if (gen2vm) {
-		pot_start = 0;
-		pot_end = -1;
-	} else {
-		if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
-		    pci_resource_len(pdev, 0) < screen_fb_size) {
-			pr_err("Resource not available or (0x%lx < 0x%lx)\n",
-			       (unsigned long) pci_resource_len(pdev, 0),
-			       (unsigned long) screen_fb_size);
-			goto err1;
-		}
-
-		pot_end = pci_resource_end(pdev, 0);
-		pot_start = pot_end - screen_fb_size + 1;
-	}
-
-	ret = vmbus_allocate_mmio(&par->mem, hdev, pot_start, pot_end,
+	ret = vmbus_allocate_mmio(&par->mem, hdev, 0, -1,
 				  screen_fb_size, 0x100000, true);
 	if (ret != 0) {
 		pr_err("Unable to allocate framebuffer memory\n");
-- 
2.35.1

[PATCH 5.15 125/247] video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit d87ad457f7e1b8d2492ca5b1531eb35030a1cc8f ]

In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will
leads some resource leaked, so adjust the sequence to handle the error
correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers()
need be called.
In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pxa3xx-gcu.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 4279e13a3b58..9421d14d0eb0 100644
--- a/drivers/video/fbdev/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -650,6 +650,7 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
 	for (i = 0; i < 8; i++) {
 		ret = pxa3xx_gcu_add_buffer(dev, priv);
 		if (ret) {
+			pxa3xx_gcu_free_buffers(dev, priv);
 			dev_err(dev, "failed to allocate DMA memory\n");
 			goto err_disable_clk;
 		}
@@ -666,15 +667,15 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
 			SHARED_SIZE, irq);
 	return 0;
 
-err_free_dma:
-	dma_free_coherent(dev, SHARED_SIZE,
-			priv->shared, priv->shared_phys);
+err_disable_clk:
+	clk_disable_unprepare(priv->clk);
 
 err_misc_deregister:
 	misc_deregister(&priv->misc_dev);
 
-err_disable_clk:
-	clk_disable_unprepare(priv->clk);
+err_free_dma:
+	dma_free_coherent(dev, SHARED_SIZE,
+			  priv->shared, priv->shared_phys);
 
 	return ret;
 }
@@ -687,6 +688,7 @@ static int pxa3xx_gcu_remove(struct platform_device *pdev)
 	pxa3xx_gcu_wait_idle(priv);
 	misc_deregister(&priv->misc_dev);
 	dma_free_coherent(dev, SHARED_SIZE, priv->shared, priv->shared_phys);
+	clk_disable_unprepare(priv->clk);
 	pxa3xx_gcu_free_buffers(dev, priv);
 
 	return 0;
-- 
2.35.1

[PATCH 5.15 126/247] RISC-V: use memcpy for kexec_file mode

[Greg Kroah-Hartman]

From: Liao Chang <liaochang1@huawei.com>

[ Upstream commit b7fb4d78a6ade6026d9e5cf438c2a46ab962e032 ]

The pointer to buffer loading kernel binaries is in kernel space for
kexec_fil mode, When copy_from_user copies data from pointer to a block
of memory, it checkes that the pointer is in the user space range, on
RISCV-V that is:

static inline bool __access_ok(unsigned long addr, unsigned long size)
{
	return size <= TASK_SIZE && addr <= TASK_SIZE - size;
}

and TASK_SIZE is 0x4000000000 for 64-bits, which now causes
copy_from_user to reject the access of the field 'buf' of struct
kexec_segment that is in range [CONFIG_PAGE_OFFSET - VMALLOC_SIZE,
CONFIG_PAGE_OFFSET), is invalid user space pointer.

This patch fixes this issue by skipping access_ok(), use mempcy() instead.

Signed-off-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-3-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/machine_kexec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/machine_kexec.c b/arch/riscv/kernel/machine_kexec.c
index cbef0fc73afa..df8e24559035 100644
--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -65,7 +65,9 @@ machine_kexec_prepare(struct kimage *image)
 		if (image->segment[i].memsz <= sizeof(fdt))
 			continue;
 
-		if (copy_from_user(&fdt, image->segment[i].buf, sizeof(fdt)))
+		if (image->file_mode)
+			memcpy(&fdt, image->segment[i].buf, sizeof(fdt));
+		else if (copy_from_user(&fdt, image->segment[i].buf, sizeof(fdt)))
 			continue;
 
 		if (fdt_check_header(&fdt))
-- 
2.35.1

[PATCH 5.15 127/247] m68knommu: fix undefined reference to `mach_get_rtc_pll

[Greg Kroah-Hartman]

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit 1300eec9e51f23c34c4487d2b06f58ca22e1ad3d ]

Configuring for a nommu classic m68k target and enabling the generic rtc
driver (CONFIG_RTC_DRV_GENERIC) will result in the following compile
error:

   m68k-linux-ld: arch/m68k/kernel/time.o: in function `rtc_ioctl':
   time.c:(.text+0x82): undefined reference to `mach_get_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xbc): undefined reference to `mach_set_rtc_pll'
   m68k-linux-ld: time.c:(.text+0xf4): undefined reference to `mach_set_rtc_pll'

There are no definitions of "mach_set_rtc_pll" and "mach_get_rtc_pll" in the
nommu code paths. Move these definitions and the associated "mach_hwclk",
so that they are around their use case in time.c. This means they will
always be defined on the builds that require them, and not on those that
cannot use them - such as ColdFire (both with and without MMU enabled).

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/kernel/setup_mm.c | 7 -------
 arch/m68k/kernel/setup_no.c | 1 -
 arch/m68k/kernel/time.c     | 9 +++++++++
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 4b51bfd38e5f..f24410a54dcb 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -87,15 +87,8 @@ void (*mach_sched_init) (void) __initdata = NULL;
 void (*mach_init_IRQ) (void) __initdata = NULL;
 void (*mach_get_model) (char *model);
 void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-int (*mach_hwclk) (int, struct rtc_time*);
-EXPORT_SYMBOL(mach_hwclk);
 unsigned int (*mach_get_ss)(void);
-int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-int (*mach_set_rtc_pll)(struct rtc_pll_info *);
 EXPORT_SYMBOL(mach_get_ss);
-EXPORT_SYMBOL(mach_get_rtc_pll);
-EXPORT_SYMBOL(mach_set_rtc_pll);
 void (*mach_reset)( void );
 void (*mach_halt)( void );
 void (*mach_power_off)( void );
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 5e4104f07a44..19eea73d3c17 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -50,7 +50,6 @@ char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
 void (*mach_sched_init)(void) __initdata = NULL;
-int (*mach_hwclk) (int, struct rtc_time*);
 
 /* machine dependent reboot functions */
 void (*mach_reset)(void);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 340ffeea0a9d..a97600b2af50 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -63,6 +63,15 @@ void timer_heartbeat(void)
 #endif /* CONFIG_HEARTBEAT */
 
 #ifdef CONFIG_M68KCLASSIC
+/* machine dependent timer functions */
+int (*mach_hwclk) (int, struct rtc_time*);
+EXPORT_SYMBOL(mach_hwclk);
+
+int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+EXPORT_SYMBOL(mach_get_rtc_pll);
+EXPORT_SYMBOL(mach_set_rtc_pll);
+
 #if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
 void read_persistent_clock64(struct timespec64 *ts)
 {
-- 
2.35.1

[PATCH 5.15 128/247] f2fs: fix to tag gcing flag on page during file defragment

[Greg Kroah-Hartman]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 2d1fe8a86bf5e0663866fd0da83c2af1e1b0e362 ]

In order to garantee migrated data be persisted during checkpoint,
otherwise out-of-order persistency between data and node may cause
data corruption after SPOR.

Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index c67756a6e32a..bfcafc20eada 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2673,6 +2673,7 @@ static int f2fs_defragment_range(struct f2fs_sb_info *sbi,
 			}
 
 			set_page_dirty(page);
+			set_page_private_gcing(page);
 			f2fs_put_page(page, 1);
 
 			idx++;
-- 
2.35.1

[PATCH 5.15 129/247] xprtrdma: treat all calls not a bcall when bc_serv is NULL

[Greg Kroah-Hartman]

From: Kinglong Mee <kinglongmee@gmail.com>

[ Upstream commit 11270e7ca268e8d61b5d9e5c3a54bd1550642c9c ]

When a rdma server returns a fault format reply, nfs v3 client may
treats it as a bcall when bc service is not exist.

The debug message at rpcrdma_bc_receive_call are,

[56579.837169] RPC:       rpcrdma_bc_receive_call: callback XID
00000001, length=20
[56579.837174] RPC:       rpcrdma_bc_receive_call: 00 00 00 01 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 04

After that, rpcrdma_bc_receive_call will meets NULL pointer as,

[  226.057890] BUG: unable to handle kernel NULL pointer dereference at
00000000000000c8
...
[  226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20
...
[  226.059732] Call Trace:
[  226.059878]  rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma]
[  226.060011]  __ib_process_cq+0x89/0x170 [ib_core]
[  226.060092]  ib_cq_poll_work+0x26/0x80 [ib_core]
[  226.060257]  process_one_work+0x1a7/0x360
[  226.060367]  ? create_worker+0x1a0/0x1a0
[  226.060440]  worker_thread+0x30/0x390
[  226.060500]  ? create_worker+0x1a0/0x1a0
[  226.060574]  kthread+0x116/0x130
[  226.060661]  ? kthread_flush_work_fn+0x10/0x10
[  226.060724]  ret_from_fork+0x35/0x40
...

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/rpc_rdma.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index c335c1361564..e9c69e9f4299 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -1120,6 +1120,7 @@ static bool
 rpcrdma_is_bcall(struct rpcrdma_xprt *r_xprt, struct rpcrdma_rep *rep)
 #if defined(CONFIG_SUNRPC_BACKCHANNEL)
 {
+	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
 	struct xdr_stream *xdr = &rep->rr_stream;
 	__be32 *p;
 
@@ -1143,6 +1144,10 @@ rpcrdma_is_bcall(struct rpcrdma_xprt *r_xprt, struct rpcrdma_rep *rep)
 	if (*p != cpu_to_be32(RPC_CALL))
 		return false;
 
+	/* No bc service. */
+	if (xprt->bc_serv == NULL)
+		return false;
+
 	/* Now that we are sure this is a backchannel call,
 	 * advance to the RPC header.
 	 */
-- 
2.35.1

[PATCH 5.15 130/247] drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 6edf615618b8259f16eeb1df98f0ba0d2312c22e ]

sn65dsi83_parse_dt() takes a reference on 'ctx->host_node' that must be
released in the error handling path of this function and of the probe.
This is only done in the remove function up to now.

Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4bc21aed4b60d3d5ac4b28d8b07a6fdd8da6a536.1640768126.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi83.c | 34 ++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
index a32f70bc68ea..bf469e8ac563 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
@@ -608,10 +608,14 @@ static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
 	ctx->host_node = of_graph_get_remote_port_parent(endpoint);
 	of_node_put(endpoint);
 
-	if (ctx->dsi_lanes < 0 || ctx->dsi_lanes > 4)
-		return -EINVAL;
-	if (!ctx->host_node)
-		return -ENODEV;
+	if (ctx->dsi_lanes < 0 || ctx->dsi_lanes > 4) {
+		ret = -EINVAL;
+		goto err_put_node;
+	}
+	if (!ctx->host_node) {
+		ret = -ENODEV;
+		goto err_put_node;
+	}
 
 	ctx->lvds_dual_link = false;
 	ctx->lvds_dual_link_even_odd_swap = false;
@@ -638,16 +642,22 @@ static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, &panel_bridge);
 	if (ret < 0)
-		return ret;
+		goto err_put_node;
 	if (panel) {
 		panel_bridge = devm_drm_panel_bridge_add(dev, panel);
-		if (IS_ERR(panel_bridge))
-			return PTR_ERR(panel_bridge);
+		if (IS_ERR(panel_bridge)) {
+			ret = PTR_ERR(panel_bridge);
+			goto err_put_node;
+		}
 	}
 
 	ctx->panel_bridge = panel_bridge;
 
 	return 0;
+
+err_put_node:
+	of_node_put(ctx->host_node);
+	return ret;
 }
 
 static int sn65dsi83_probe(struct i2c_client *client,
@@ -680,8 +690,10 @@ static int sn65dsi83_probe(struct i2c_client *client,
 		return ret;
 
 	ctx->regmap = devm_regmap_init_i2c(client, &sn65dsi83_regmap_config);
-	if (IS_ERR(ctx->regmap))
-		return PTR_ERR(ctx->regmap);
+	if (IS_ERR(ctx->regmap)) {
+		ret = PTR_ERR(ctx->regmap);
+		goto err_put_node;
+	}
 
 	dev_set_drvdata(dev, ctx);
 	i2c_set_clientdata(client, ctx);
@@ -691,6 +703,10 @@ static int sn65dsi83_probe(struct i2c_client *client,
 	drm_bridge_add(&ctx->bridge);
 
 	return 0;
+
+err_put_node:
+	of_node_put(ctx->host_node);
+	return ret;
 }
 
 static int sn65dsi83_remove(struct i2c_client *client)
-- 
2.35.1

[PATCH 5.15 131/247] drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit edbc7960bef7fd71ef1e44d0df15b864784b14c8 ]

Handle empty data-lanes = < >; property, which translates to
dsi_lanes = 0 as invalid.

Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi83.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
index bf469e8ac563..c901c0e1a3b0 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
@@ -608,7 +608,7 @@ static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
 	ctx->host_node = of_graph_get_remote_port_parent(endpoint);
 	of_node_put(endpoint);
 
-	if (ctx->dsi_lanes < 0 || ctx->dsi_lanes > 4) {
+	if (ctx->dsi_lanes <= 0 || ctx->dsi_lanes > 4) {
 		ret = -EINVAL;
 		goto err_put_node;
 	}
-- 
2.35.1

[PATCH 5.15 132/247] netfilter: nat: really support inet nat without l3 address

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 282e5f8fe907dc3f2fbf9f2103b0e62ffc3a68a5 ]

When no l3 address is given, priv->family is set to NFPROTO_INET and
the evaluation function isn't called.

Call it too so l4-only rewrite can work.
Also add a test case for this.

Fixes: a33f387ecd5aa ("netfilter: nft_nat: allow to specify layer 4 protocol NAT only")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_nat.c                      |  3 +-
 tools/testing/selftests/netfilter/nft_nat.sh | 43 ++++++++++++++++++++
 2 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index be1595d6979d..db8f9116eeb4 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -334,7 +334,8 @@ static void nft_nat_inet_eval(const struct nft_expr *expr,
 {
 	const struct nft_nat *priv = nft_expr_priv(expr);
 
-	if (priv->family == nft_pf(pkt))
+	if (priv->family == nft_pf(pkt) ||
+	    priv->family == NFPROTO_INET)
 		nft_nat_eval(expr, regs, pkt);
 }
 
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 781fa2d9ea9d..032f2de6e14e 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -374,6 +374,45 @@ EOF
 	return $lret
 }
 
+test_local_dnat_portonly()
+{
+	local family=$1
+	local daddr=$2
+	local lret=0
+	local sr_s
+	local sr_r
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		meta l4proto tcp dnat to :2000
+
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		if [ $family = "inet" ];then
+			echo "SKIP: inet port test"
+			test_inet_nat=false
+			return
+		fi
+		echo "SKIP: Could not add $family dnat hook"
+		return
+	fi
+
+	echo SERVER-$family | ip netns exec "$ns1" timeout 5 socat -u STDIN TCP-LISTEN:2000 &
+	sc_s=$!
+
+	result=$(ip netns exec "$ns0" timeout 1 socat TCP:$daddr:2000 STDOUT)
+
+	if [ "$result" = "SERVER-inet" ];then
+		echo "PASS: inet port rewrite without l3 address"
+	else
+		echo "ERROR: inet port rewrite"
+		ret=1
+	fi
+}
 
 test_masquerade6()
 {
@@ -1135,6 +1174,10 @@ fi
 reset_counters
 test_local_dnat ip
 test_local_dnat6 ip6
+
+reset_counters
+test_local_dnat_portonly inet 10.0.1.99
+
 reset_counters
 $test_inet_nat && test_local_dnat inet
 $test_inet_nat && test_local_dnat6 inet
-- 
2.35.1

[PATCH 5.15 133/247] netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit ab5e5c062f67c5ae8cd07f0632ffa62dc0e7d169 ]

Use kfree_rcu(ptr, rcu) variant instead as described by ae089831ff28
("netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant").

Fixes: f9a43007d3f7 ("netfilter: nf_tables: double hook unregistration in netns path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 79e8fc687fdd..5833fe17be43 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -7231,7 +7231,7 @@ static void __nft_unregister_flowtable_net_hooks(struct net *net,
 		nf_unregister_net_hook(net, &hook->ops);
 		if (release_netdev) {
 			list_del(&hook->list);
-			kfree_rcu(hook);
+			kfree_rcu(hook, rcu);
 		}
 	}
 }
-- 
2.35.1

[PATCH 5.15 134/247] netfilter: nf_tables: delete flowtable hooks via transaction list

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit b6d9014a3335194590abdd2a2471ef5147a67645 ]

Remove inactive bool field in nft_hook object that was introduced in
abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable").
Move stale flowtable hooks to transaction list instead.

Deleting twice the same device does not result in ENOENT.

Fixes: abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h |  1 -
 net/netfilter/nf_tables_api.c     | 31 ++++++-------------------------
 2 files changed, 6 insertions(+), 26 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index d52a5d776e76..2af1c2c64128 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -1053,7 +1053,6 @@ struct nft_stats {
 
 struct nft_hook {
 	struct list_head	list;
-	bool			inactive;
 	struct nf_hook_ops	ops;
 	struct rcu_head		rcu;
 };
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 5833fe17be43..b19974073156 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1835,7 +1835,6 @@ static struct nft_hook *nft_netdev_hook_alloc(struct net *net,
 		goto err_hook_dev;
 	}
 	hook->ops.dev = dev;
-	hook->inactive = false;
 
 	return hook;
 
@@ -7517,6 +7516,7 @@ static int nft_delflowtable_hook(struct nft_ctx *ctx,
 {
 	const struct nlattr * const *nla = ctx->nla;
 	struct nft_flowtable_hook flowtable_hook;
+	LIST_HEAD(flowtable_del_list);
 	struct nft_hook *this, *hook;
 	struct nft_trans *trans;
 	int err;
@@ -7532,7 +7532,7 @@ static int nft_delflowtable_hook(struct nft_ctx *ctx,
 			err = -ENOENT;
 			goto err_flowtable_del_hook;
 		}
-		hook->inactive = true;
+		list_move(&hook->list, &flowtable_del_list);
 	}
 
 	trans = nft_trans_alloc(ctx, NFT_MSG_DELFLOWTABLE,
@@ -7545,6 +7545,7 @@ static int nft_delflowtable_hook(struct nft_ctx *ctx,
 	nft_trans_flowtable(trans) = flowtable;
 	nft_trans_flowtable_update(trans) = true;
 	INIT_LIST_HEAD(&nft_trans_flowtable_hooks(trans));
+	list_splice(&flowtable_del_list, &nft_trans_flowtable_hooks(trans));
 	nft_flowtable_hook_release(&flowtable_hook);
 
 	nft_trans_commit_list_add_tail(ctx->net, trans);
@@ -7552,13 +7553,7 @@ static int nft_delflowtable_hook(struct nft_ctx *ctx,
 	return 0;
 
 err_flowtable_del_hook:
-	list_for_each_entry(this, &flowtable_hook.list, list) {
-		hook = nft_hook_list_find(&flowtable->hook_list, this);
-		if (!hook)
-			break;
-
-		hook->inactive = false;
-	}
+	list_splice(&flowtable_del_list, &flowtable->hook_list);
 	nft_flowtable_hook_release(&flowtable_hook);
 
 	return err;
@@ -8413,17 +8408,6 @@ void nft_chain_del(struct nft_chain *chain)
 	list_del_rcu(&chain->list);
 }
 
-static void nft_flowtable_hooks_del(struct nft_flowtable *flowtable,
-				    struct list_head *hook_list)
-{
-	struct nft_hook *hook, *next;
-
-	list_for_each_entry_safe(hook, next, &flowtable->hook_list, list) {
-		if (hook->inactive)
-			list_move(&hook->list, hook_list);
-	}
-}
-
 static void nf_tables_module_autoload_cleanup(struct net *net)
 {
 	struct nftables_pernet *nft_net = nft_pernet(net);
@@ -8768,8 +8752,6 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
 			break;
 		case NFT_MSG_DELFLOWTABLE:
 			if (nft_trans_flowtable_update(trans)) {
-				nft_flowtable_hooks_del(nft_trans_flowtable(trans),
-							&nft_trans_flowtable_hooks(trans));
 				nf_tables_flowtable_notify(&trans->ctx,
 							   nft_trans_flowtable(trans),
 							   &nft_trans_flowtable_hooks(trans),
@@ -8850,7 +8832,6 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action)
 	struct nftables_pernet *nft_net = nft_pernet(net);
 	struct nft_trans *trans, *next;
 	struct nft_trans_elem *te;
-	struct nft_hook *hook;
 
 	if (action == NFNL_ABORT_VALIDATE &&
 	    nf_tables_validate(net) < 0)
@@ -8981,8 +8962,8 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action)
 			break;
 		case NFT_MSG_DELFLOWTABLE:
 			if (nft_trans_flowtable_update(trans)) {
-				list_for_each_entry(hook, &nft_trans_flowtable(trans)->hook_list, list)
-					hook->inactive = false;
+				list_splice(&nft_trans_flowtable_hooks(trans),
+					    &nft_trans_flowtable(trans)->hook_list);
 			} else {
 				trans->ctx.table->use++;
 				nft_clear(trans->ctx.net, nft_trans_flowtable(trans));
-- 
2.35.1

[PATCH 5.15 135/247] powerpc/kasan: Force thread size increase with KASAN

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 3e8635fb2e072672cbc650989ffedf8300ad67fb ]

KASAN causes increased stack usage, which can lead to stack overflows.

The logic in Kconfig to suggest a larger default doesn't work if a user
has CONFIG_EXPERT enabled and has an existing .config with a smaller
value.

Follow the lead of x86 and arm64, and force the thread size to be
increased when KASAN is enabled.

That also has the effect of enlarging the stack for 64-bit KASAN builds,
which is also desirable.

Fixes: edbadaf06710 ("powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use MIN_THREAD_SHIFT as suggested by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220601143114.133524-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Kconfig                   |  1 -
 arch/powerpc/include/asm/thread_info.h | 10 ++++++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6b9f523882c5..3bd3a3f16648 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -768,7 +768,6 @@ config THREAD_SHIFT
 	range 13 15
 	default "15" if PPC_256K_PAGES
 	default "14" if PPC64
-	default "14" if KASAN
 	default "13"
 	help
 	  Used to define the stack size. The default is almost always what you
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 2a4ea0e213a9..87013ac2a640 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -14,10 +14,16 @@
 
 #ifdef __KERNEL__
 
-#if defined(CONFIG_VMAP_STACK) && CONFIG_THREAD_SHIFT < PAGE_SHIFT
+#ifdef CONFIG_KASAN
+#define MIN_THREAD_SHIFT	(CONFIG_THREAD_SHIFT + 1)
+#else
+#define MIN_THREAD_SHIFT	CONFIG_THREAD_SHIFT
+#endif
+
+#if defined(CONFIG_VMAP_STACK) && MIN_THREAD_SHIFT < PAGE_SHIFT
 #define THREAD_SHIFT		PAGE_SHIFT
 #else
-#define THREAD_SHIFT		CONFIG_THREAD_SHIFT
+#define THREAD_SHIFT		MIN_THREAD_SHIFT
 #endif
 
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
-- 
2.35.1

[PATCH 5.15 136/247] SUNRPC: Trap RDMA segment overflows

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit f012e95b377c73c0283f009823c633104dedb337 ]

Prevent svc_rdma_build_writes() from walking off the end of a Write
chunk's segment array. Caught with KASAN.

The test that this fix replaces is invalid, and might have been left
over from an earlier prototype of the PCL work.

Fixes: 7a1cbfa18059 ("svcrdma: Use parsed chunk lists to construct RDMA Writes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/svc_rdma_rw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index e27433f08ca7..50bf62f85166 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -456,10 +456,10 @@ svc_rdma_build_writes(struct svc_rdma_write_info *info,
 		unsigned int write_len;
 		u64 offset;
 
-		seg = &info->wi_chunk->ch_segments[info->wi_seg_no];
-		if (!seg)
+		if (info->wi_seg_no >= info->wi_chunk->ch_segcount)
 			goto out_overflow;
 
+		seg = &info->wi_chunk->ch_segments[info->wi_seg_no];
 		write_len = min(remaining, seg->rs_length - info->wi_seg_off);
 		if (!write_len)
 			goto out_overflow;
-- 
2.35.1

[PATCH 5.15 137/247] netfilter: nf_tables: always initialize flowtable hook list in transaction

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 2c9e4559773c261900c674a86b8e455911675d71 ]

The hook list is used if nft_trans_flowtable_update(trans) == true. However,
initialize this list for other cases for safety reasons.

Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index b19974073156..5c0379394b4a 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -544,6 +544,7 @@ static int nft_trans_flowtable_add(struct nft_ctx *ctx, int msg_type,
 	if (msg_type == NFT_MSG_NEWFLOWTABLE)
 		nft_activate_next(ctx->net, flowtable);
 
+	INIT_LIST_HEAD(&nft_trans_flowtable_hooks(trans));
 	nft_trans_flowtable(trans) = flowtable;
 	nft_trans_commit_list_add_tail(ctx->net, trans);
 
-- 
2.35.1

[PATCH 5.15 138/247] ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ]

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() to avoid refcount leak.

Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/pata_octeon_cf.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index b5a3f710d76d..4cc8a1027888 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -888,12 +888,14 @@ static int octeon_cf_probe(struct platform_device *pdev)
 				int i;
 				res_dma = platform_get_resource(dma_dev, IORESOURCE_MEM, 0);
 				if (!res_dma) {
+					put_device(&dma_dev->dev);
 					of_node_put(dma_node);
 					return -EINVAL;
 				}
 				cf_port->dma_base = (u64)devm_ioremap(&pdev->dev, res_dma->start,
 									 resource_size(res_dma));
 				if (!cf_port->dma_base) {
+					put_device(&dma_dev->dev);
 					of_node_put(dma_node);
 					return -EINVAL;
 				}
@@ -903,6 +905,7 @@ static int octeon_cf_probe(struct platform_device *pdev)
 					irq = i;
 					irq_handler = octeon_cf_interrupt;
 				}
+				put_device(&dma_dev->dev);
 			}
 			of_node_put(dma_node);
 		}
-- 
2.35.1

[PATCH 5.15 139/247] netfilter: nf_tables: release new hooks on unsupported flowtable flags

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit c271cc9febaaa1bcbc0842d1ee30466aa6148ea8 ]

Release the list of new hooks that are pending to be registered in case
that unsupported flowtable flags are provided.

Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 5c0379394b4a..af2ae42cc5c7 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -7332,11 +7332,15 @@ static int nft_flowtable_update(struct nft_ctx *ctx, const struct nlmsghdr *nlh,
 
 	if (nla[NFTA_FLOWTABLE_FLAGS]) {
 		flags = ntohl(nla_get_be32(nla[NFTA_FLOWTABLE_FLAGS]));
-		if (flags & ~NFT_FLOWTABLE_MASK)
-			return -EOPNOTSUPP;
+		if (flags & ~NFT_FLOWTABLE_MASK) {
+			err = -EOPNOTSUPP;
+			goto err_flowtable_update_hook;
+		}
 		if ((flowtable->data.flags & NFT_FLOWTABLE_HW_OFFLOAD) ^
-		    (flags & NFT_FLOWTABLE_HW_OFFLOAD))
-			return -EOPNOTSUPP;
+		    (flags & NFT_FLOWTABLE_HW_OFFLOAD)) {
+			err = -EOPNOTSUPP;
+			goto err_flowtable_update_hook;
+		}
 	} else {
 		flags = flowtable->data.flags;
 	}
-- 
2.35.1

[PATCH 5.15 140/247] netfilter: nf_tables: memleak flow rule from commit path

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 9dd732e0bdf538b1b76dc7c157e2b5e560ff30d3 ]

Abort path release flow rule object, however, commit path does not.
Update code to destroy these objects before releasing the transaction.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index af2ae42cc5c7..1528620df34c 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -8228,6 +8228,9 @@ static void nft_commit_release(struct nft_trans *trans)
 		nf_tables_chain_destroy(&trans->ctx);
 		break;
 	case NFT_MSG_DELRULE:
+		if (trans->ctx.chain->flags & NFT_CHAIN_HW_OFFLOAD)
+			nft_flow_rule_destroy(nft_trans_flow_rule(trans));
+
 		nf_tables_rule_destroy(&trans->ctx, nft_trans_rule(trans));
 		break;
 	case NFT_MSG_DELSET:
@@ -8667,6 +8670,9 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
 			nf_tables_rule_notify(&trans->ctx,
 					      nft_trans_rule(trans),
 					      NFT_MSG_NEWRULE);
+			if (trans->ctx.chain->flags & NFT_CHAIN_HW_OFFLOAD)
+				nft_flow_rule_destroy(nft_trans_flow_rule(trans));
+
 			nft_trans_destroy(trans);
 			break;
 		case NFT_MSG_DELRULE:
-- 
2.35.1

[PATCH 5.15 141/247] netfilter: nf_tables: bail out early if hardware offload is not supported

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 3a41c64d9c1185a2f3a184015e2a9b78bfc99c71 ]

If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/flow_offload.h                |  1 +
 include/net/netfilter/nf_tables_offload.h |  2 +-
 net/core/flow_offload.c                   |  6 ++++++
 net/netfilter/nf_tables_api.c             |  2 +-
 net/netfilter/nf_tables_offload.c         | 23 ++++++++++++++++++++++-
 5 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h
index 3961461d9c8b..7a2b0223a02c 100644
--- a/include/net/flow_offload.h
+++ b/include/net/flow_offload.h
@@ -575,5 +575,6 @@ int flow_indr_dev_setup_offload(struct net_device *dev, struct Qdisc *sch,
 				enum tc_setup_type type, void *data,
 				struct flow_block_offload *bo,
 				void (*cleanup)(struct flow_block_cb *block_cb));
+bool flow_indr_dev_exists(void);
 
 #endif /* _NET_FLOW_OFFLOAD_H */
diff --git a/include/net/netfilter/nf_tables_offload.h b/include/net/netfilter/nf_tables_offload.h
index 797147843958..3568b6a2f5f0 100644
--- a/include/net/netfilter/nf_tables_offload.h
+++ b/include/net/netfilter/nf_tables_offload.h
@@ -92,7 +92,7 @@ int nft_flow_rule_offload_commit(struct net *net);
 	NFT_OFFLOAD_MATCH(__key, __base, __field, __len, __reg)		\
 	memset(&(__reg)->mask, 0xff, (__reg)->len);
 
-int nft_chain_offload_priority(struct nft_base_chain *basechain);
+bool nft_chain_offload_support(const struct nft_base_chain *basechain);
 
 int nft_offload_init(void);
 void nft_offload_exit(void);
diff --git a/net/core/flow_offload.c b/net/core/flow_offload.c
index 6beaea13564a..fb11103fa8af 100644
--- a/net/core/flow_offload.c
+++ b/net/core/flow_offload.c
@@ -565,3 +565,9 @@ int flow_indr_dev_setup_offload(struct net_device *dev,	struct Qdisc *sch,
 	return list_empty(&bo->cb_list) ? -EOPNOTSUPP : 0;
 }
 EXPORT_SYMBOL(flow_indr_dev_setup_offload);
+
+bool flow_indr_dev_exists(void)
+{
+	return !list_empty(&flow_block_indr_dev_list);
+}
+EXPORT_SYMBOL(flow_indr_dev_exists);
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 1528620df34c..1b4bc588f8d6 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2072,7 +2072,7 @@ static int nft_basechain_init(struct nft_base_chain *basechain, u8 family,
 	chain->flags |= NFT_CHAIN_BASE | flags;
 	basechain->policy = NF_ACCEPT;
 	if (chain->flags & NFT_CHAIN_HW_OFFLOAD &&
-	    nft_chain_offload_priority(basechain) < 0)
+	    !nft_chain_offload_support(basechain))
 		return -EOPNOTSUPP;
 
 	flow_block_init(&basechain->flow_block);
diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 2d36952b1392..910ef881c3b8 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -208,7 +208,7 @@ static int nft_setup_cb_call(enum tc_setup_type type, void *type_data,
 	return 0;
 }
 
-int nft_chain_offload_priority(struct nft_base_chain *basechain)
+static int nft_chain_offload_priority(const struct nft_base_chain *basechain)
 {
 	if (basechain->ops.priority <= 0 ||
 	    basechain->ops.priority > USHRT_MAX)
@@ -217,6 +217,27 @@ int nft_chain_offload_priority(struct nft_base_chain *basechain)
 	return 0;
 }
 
+bool nft_chain_offload_support(const struct nft_base_chain *basechain)
+{
+	struct net_device *dev;
+	struct nft_hook *hook;
+
+	if (nft_chain_offload_priority(basechain) < 0)
+		return false;
+
+	list_for_each_entry(hook, &basechain->hook_list, list) {
+		if (hook->ops.pf != NFPROTO_NETDEV ||
+		    hook->ops.hooknum != NF_NETDEV_INGRESS)
+			return false;
+
+		dev = hook->ops.dev;
+		if (!dev->netdev_ops->ndo_setup_tc && !flow_indr_dev_exists())
+			return false;
+	}
+
+	return true;
+}
+
 static void nft_flow_cls_offload_setup(struct flow_cls_offload *cls_flow,
 				       const struct nft_base_chain *basechain,
 				       const struct nft_rule *rule,
-- 
2.35.1

[PATCH 5.15 142/247] xen: unexport __init-annotated xen_xlate_map_ballooned_pages()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit dbac14a5a05ff8e1ce7c0da0e1f520ce39ec62ea ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because none of the in-tree call-sites
(arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as
modular.

Fixes: 243848fc018c ("xen/grant-table: Move xlated_setup_gnttab_pages to common place")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xlate_mmu.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c
index 34742c6e189e..f17c4c03db30 100644
--- a/drivers/xen/xlate_mmu.c
+++ b/drivers/xen/xlate_mmu.c
@@ -261,7 +261,6 @@ int __init xen_xlate_map_ballooned_pages(xen_pfn_t **gfns, void **virt,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(xen_xlate_map_ballooned_pages);
 
 struct remap_pfn {
 	struct mm_struct *mm;
-- 
2.35.1

[PATCH 5.15 143/247] stmmac: intel: Fix an error handling path in intel_eth_pci_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5e74a4b3ec1816e3bbfd715d46ae29d2508079cb ]

When the managed API is used, there is no need to explicitly call
pci_free_irq_vectors().

This looks to be a left-over from the commit in the Fixes tag. Only the
.remove() function had been updated.

So remove this unused function call and update goto label accordingly.

Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 6f87e296a410..502fbbc082fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -1073,13 +1073,11 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret) {
-		goto err_dvr_probe;
+		goto err_alloc_irq;
 	}
 
 	return 0;
 
-err_dvr_probe:
-	pci_free_irq_vectors(pdev);
 err_alloc_irq:
 	clk_disable_unprepare(plat->stmmac_clk);
 	clk_unregister_fixed_rate(plat->stmmac_clk);
-- 
2.35.1

[PATCH 5.15 144/247] af_unix: Fix a data-race in unix_dgram_peer_wake_me().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 662a80946ce13633ae90a55379f1346c10f0c432 ]

unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full.  Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.

Fixes: 7d267278a9ec ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 62f47821d783..b7be8d066753 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -446,7 +446,7 @@ static int unix_dgram_peer_wake_me(struct sock *sk, struct sock *other)
 	 * -ECONNREFUSED. Otherwise, if we haven't queued any skbs
 	 * to other and its full, we will hang waiting for POLLOUT.
 	 */
-	if (unix_recvq_full(other) && !sock_flag(other, SOCK_DEAD))
+	if (unix_recvq_full_lockless(other) && !sock_flag(other, SOCK_DEAD))
 		return 1;
 
 	if (connected)
-- 
2.35.1

[PATCH 5.15 145/247] bpf, arm64: Clear prog->jited_len along prog->jited

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 10f3b29c65bb2fe0d47c2945cd0b4087be1c5218 ]

syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]

There was no repro yet on this bug, but I think
that commit 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.

bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.

My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.

It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.

I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.

[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
 usercopy_abort+0x90/0x94 mm/usercopy.c:89
 check_heap_object mm/usercopy.c:186 [inline]
 __check_object_size mm/usercopy.c:252 [inline]
 __check_object_size+0x198/0x36c mm/usercopy.c:214
 check_object_size include/linux/thread_info.h:199 [inline]
 check_copy_size include/linux/thread_info.h:235 [inline]
 copy_to_user include/linux/uaccess.h:159 [inline]
 bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
 __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
 invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)

Fixes: db496944fdaa ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/net/bpf_jit_comp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index b56e7bd96594..95439bbe5df8 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1113,6 +1113,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 			bpf_jit_binary_free(header);
 			prog->bpf_func = NULL;
 			prog->jited = 0;
+			prog->jited_len = 0;
 			goto out_off;
 		}
 		bpf_jit_binary_lock_ro(header);
-- 
2.35.1

[PATCH 5.15 146/247] net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 0737e018a05e2aa352828c52bdeed3b02cff2930 ]

Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
when breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the gphy_fw_np.
Add missing of_node_put() to avoid refcount leak.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220605072335.11257-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/lantiq_gswip.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 8a8f392813d8..2240a3d35122 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -2047,8 +2047,10 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
 	for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) {
 		err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i],
 					  gphy_fw_np, i);
-		if (err)
+		if (err) {
+			of_node_put(gphy_fw_np);
 			goto remove_gphy;
+		}
 		i++;
 	}
 
-- 
2.35.1

[PATCH 5.15 147/247] net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure

[Greg Kroah-Hartman]

From: Gal Pressman <gal@nvidia.com>

[ Upstream commit f5826c8c9d57210a17031af5527056eefdc2b7eb ]

The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.

Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index fde521b1eeca..c3cffb32fb06 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -2103,7 +2103,7 @@ static int mlx4_en_get_module_eeprom(struct net_device *dev,
 			en_err(priv,
 			       "mlx4_get_module_info i(%d) offset(%d) bytes_to_read(%d) - FAILED (0x%x)\n",
 			       i, offset, ee->len - i, ret);
-			return 0;
+			return ret;
 		}
 
 		i += ret;
-- 
2.35.1

[PATCH 5.15 148/247] i40e: xsk: Move tmp desc array from driver to pool

[Greg Kroah-Hartman]

From: Magnus Karlsson <magnus.karlsson@intel.com>

[ Upstream commit d1bc532e99becf104635ed4da6fefa306f452321 ]

Move desc_array from the driver to the pool. The reason behind this is
that we can then reuse this array as a temporary storage for descriptors
in all zero-copy drivers that use the batched interface. This will make
it easier to add batching to more drivers.

i40e is the only driver that has a batched Tx zero-copy
implementation, so no need to touch any other driver.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20220125160446.78976-6-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 11 -----------
 drivers/net/ethernet/intel/i40e/i40e_txrx.h |  1 -
 drivers/net/ethernet/intel/i40e/i40e_xsk.c  |  4 ++--
 include/net/xdp_sock_drv.h                  |  5 ++---
 include/net/xsk_buff_pool.h                 |  1 +
 net/xdp/xsk.c                               | 13 ++++++-------
 net/xdp/xsk_buff_pool.c                     |  7 +++++++
 net/xdp/xsk_queue.h                         | 12 ++++++------
 8 files changed, 24 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 10a83e5385c7..d3a4a33977ee 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -830,8 +830,6 @@ void i40e_free_tx_resources(struct i40e_ring *tx_ring)
 	i40e_clean_tx_ring(tx_ring);
 	kfree(tx_ring->tx_bi);
 	tx_ring->tx_bi = NULL;
-	kfree(tx_ring->xsk_descs);
-	tx_ring->xsk_descs = NULL;
 
 	if (tx_ring->desc) {
 		dma_free_coherent(tx_ring->dev, tx_ring->size,
@@ -1433,13 +1431,6 @@ int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
 	if (!tx_ring->tx_bi)
 		goto err;
 
-	if (ring_is_xdp(tx_ring)) {
-		tx_ring->xsk_descs = kcalloc(I40E_MAX_NUM_DESCRIPTORS, sizeof(*tx_ring->xsk_descs),
-					     GFP_KERNEL);
-		if (!tx_ring->xsk_descs)
-			goto err;
-	}
-
 	u64_stats_init(&tx_ring->syncp);
 
 	/* round up to nearest 4K */
@@ -1463,8 +1454,6 @@ int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
 	return 0;
 
 err:
-	kfree(tx_ring->xsk_descs);
-	tx_ring->xsk_descs = NULL;
 	kfree(tx_ring->tx_bi);
 	tx_ring->tx_bi = NULL;
 	return -ENOMEM;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index bfc2845c99d1..f6d91fa1562e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -390,7 +390,6 @@ struct i40e_ring {
 	u16 rx_offset;
 	struct xdp_rxq_info xdp_rxq;
 	struct xsk_buff_pool *xsk_pool;
-	struct xdp_desc *xsk_descs;      /* For storing descriptors in the AF_XDP ZC path */
 } ____cacheline_internodealigned_in_smp;
 
 static inline bool ring_uses_build_skb(struct i40e_ring *ring)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 3f27a8ebe2ec..54c91dc459dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -473,11 +473,11 @@ static void i40e_set_rs_bit(struct i40e_ring *xdp_ring)
  **/
 static bool i40e_xmit_zc(struct i40e_ring *xdp_ring, unsigned int budget)
 {
-	struct xdp_desc *descs = xdp_ring->xsk_descs;
+	struct xdp_desc *descs = xdp_ring->xsk_pool->tx_descs;
 	u32 nb_pkts, nb_processed = 0;
 	unsigned int total_bytes = 0;
 
-	nb_pkts = xsk_tx_peek_release_desc_batch(xdp_ring->xsk_pool, descs, budget);
+	nb_pkts = xsk_tx_peek_release_desc_batch(xdp_ring->xsk_pool, budget);
 	if (!nb_pkts)
 		return true;
 
diff --git a/include/net/xdp_sock_drv.h b/include/net/xdp_sock_drv.h
index 4e295541e396..ffe13a10bc96 100644
--- a/include/net/xdp_sock_drv.h
+++ b/include/net/xdp_sock_drv.h
@@ -13,7 +13,7 @@
 
 void xsk_tx_completed(struct xsk_buff_pool *pool, u32 nb_entries);
 bool xsk_tx_peek_desc(struct xsk_buff_pool *pool, struct xdp_desc *desc);
-u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *desc, u32 max);
+u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 max);
 void xsk_tx_release(struct xsk_buff_pool *pool);
 struct xsk_buff_pool *xsk_get_pool_from_qid(struct net_device *dev,
 					    u16 queue_id);
@@ -129,8 +129,7 @@ static inline bool xsk_tx_peek_desc(struct xsk_buff_pool *pool,
 	return false;
 }
 
-static inline u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *desc,
-						 u32 max)
+static inline u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 max)
 {
 	return 0;
 }
diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h
index 7a9a23e7a604..ee152f031d0c 100644
--- a/include/net/xsk_buff_pool.h
+++ b/include/net/xsk_buff_pool.h
@@ -60,6 +60,7 @@ struct xsk_buff_pool {
 	 */
 	dma_addr_t *dma_pages;
 	struct xdp_buff_xsk *heads;
+	struct xdp_desc *tx_descs;
 	u64 chunk_mask;
 	u64 addrs_cnt;
 	u32 free_list_cnt;
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 444ad0bc0908..404cbfde2f84 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -358,9 +358,9 @@ bool xsk_tx_peek_desc(struct xsk_buff_pool *pool, struct xdp_desc *desc)
 }
 EXPORT_SYMBOL(xsk_tx_peek_desc);
 
-static u32 xsk_tx_peek_release_fallback(struct xsk_buff_pool *pool, struct xdp_desc *descs,
-					u32 max_entries)
+static u32 xsk_tx_peek_release_fallback(struct xsk_buff_pool *pool, u32 max_entries)
 {
+	struct xdp_desc *descs = pool->tx_descs;
 	u32 nb_pkts = 0;
 
 	while (nb_pkts < max_entries && xsk_tx_peek_desc(pool, &descs[nb_pkts]))
@@ -370,8 +370,7 @@ static u32 xsk_tx_peek_release_fallback(struct xsk_buff_pool *pool, struct xdp_d
 	return nb_pkts;
 }
 
-u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *descs,
-				   u32 max_entries)
+u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 max_entries)
 {
 	struct xdp_sock *xs;
 	u32 nb_pkts;
@@ -380,7 +379,7 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *
 	if (!list_is_singular(&pool->xsk_tx_list)) {
 		/* Fallback to the non-batched version */
 		rcu_read_unlock();
-		return xsk_tx_peek_release_fallback(pool, descs, max_entries);
+		return xsk_tx_peek_release_fallback(pool, max_entries);
 	}
 
 	xs = list_first_or_null_rcu(&pool->xsk_tx_list, struct xdp_sock, tx_list);
@@ -389,7 +388,7 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *
 		goto out;
 	}
 
-	nb_pkts = xskq_cons_peek_desc_batch(xs->tx, descs, pool, max_entries);
+	nb_pkts = xskq_cons_peek_desc_batch(xs->tx, pool, max_entries);
 	if (!nb_pkts) {
 		xs->tx->queue_empty_descs++;
 		goto out;
@@ -401,7 +400,7 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, struct xdp_desc *
 	 * packets. This avoids having to implement any buffering in
 	 * the Tx path.
 	 */
-	nb_pkts = xskq_prod_reserve_addr_batch(pool->cq, descs, nb_pkts);
+	nb_pkts = xskq_prod_reserve_addr_batch(pool->cq, pool->tx_descs, nb_pkts);
 	if (!nb_pkts)
 		goto out;
 
diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c
index 8de01aaac4a0..23fbef4aef74 100644
--- a/net/xdp/xsk_buff_pool.c
+++ b/net/xdp/xsk_buff_pool.c
@@ -37,6 +37,7 @@ void xp_destroy(struct xsk_buff_pool *pool)
 	if (!pool)
 		return;
 
+	kvfree(pool->tx_descs);
 	kvfree(pool->heads);
 	kvfree(pool);
 }
@@ -57,6 +58,12 @@ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs,
 	if (!pool->heads)
 		goto out;
 
+	if (xs->tx) {
+		pool->tx_descs = kcalloc(xs->tx->nentries, sizeof(*pool->tx_descs), GFP_KERNEL);
+		if (!pool->tx_descs)
+			goto out;
+	}
+
 	pool->chunk_mask = ~((u64)umem->chunk_size - 1);
 	pool->addrs_cnt = umem->size;
 	pool->heads_cnt = umem->chunks;
diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index 9ae13cccfb28..b721795fe50c 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -201,11 +201,11 @@ static inline bool xskq_cons_read_desc(struct xsk_queue *q,
 	return false;
 }
 
-static inline u32 xskq_cons_read_desc_batch(struct xsk_queue *q,
-					    struct xdp_desc *descs,
-					    struct xsk_buff_pool *pool, u32 max)
+static inline u32 xskq_cons_read_desc_batch(struct xsk_queue *q, struct xsk_buff_pool *pool,
+					    u32 max)
 {
 	u32 cached_cons = q->cached_cons, nb_entries = 0;
+	struct xdp_desc *descs = pool->tx_descs;
 
 	while (cached_cons != q->cached_prod && nb_entries < max) {
 		struct xdp_rxtx_ring *ring = (struct xdp_rxtx_ring *)q->ring;
@@ -278,12 +278,12 @@ static inline bool xskq_cons_peek_desc(struct xsk_queue *q,
 	return xskq_cons_read_desc(q, desc, pool);
 }
 
-static inline u32 xskq_cons_peek_desc_batch(struct xsk_queue *q, struct xdp_desc *descs,
-					    struct xsk_buff_pool *pool, u32 max)
+static inline u32 xskq_cons_peek_desc_batch(struct xsk_queue *q, struct xsk_buff_pool *pool,
+					    u32 max)
 {
 	u32 entries = xskq_cons_nb_entries(q, max);
 
-	return xskq_cons_read_desc_batch(q, descs, pool, entries);
+	return xskq_cons_read_desc_batch(q, pool, entries);
 }
 
 /* To improve performance in the xskq_cons_release functions, only update local state here.
-- 
2.35.1

[PATCH 5.15 149/247] xsk: Fix handling of invalid descriptors in XSK TX batching API

[Greg Kroah-Hartman]

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit d678cbd2f867a564a3c5b276c454e873f43f02f8 ]

xdpxceiver run on a AF_XDP ZC enabled driver revealed a problem with XSK
Tx batching API. There is a test that checks how invalid Tx descriptors
are handled by AF_XDP. Each valid descriptor is followed by invalid one
on Tx side whereas the Rx side expects only to receive a set of valid
descriptors.

In current xsk_tx_peek_release_desc_batch() function, the amount of
available descriptors is hidden inside xskq_cons_peek_desc_batch(). This
can be problematic in cases where invalid descriptors are present due to
the fact that xskq_cons_peek_desc_batch() returns only a count of valid
descriptors. This means that it is impossible to properly update XSK
ring state when calling xskq_cons_release_n().

To address this issue, pull out the contents of
xskq_cons_peek_desc_batch() so that callers (currently only
xsk_tx_peek_release_desc_batch()) will always be able to update the
state of ring properly, as total count of entries is now available and
use this value as an argument in xskq_cons_release_n(). By
doing so, xskq_cons_peek_desc_batch() can be dropped altogether.

Fixes: 9349eb3a9d2a ("xsk: Introduce batched Tx descriptor interfaces")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220607142200.576735-1-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xsk.c       | 5 +++--
 net/xdp/xsk_queue.h | 8 --------
 2 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 404cbfde2f84..b9e70931c794 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -388,7 +388,8 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 max_entries)
 		goto out;
 	}
 
-	nb_pkts = xskq_cons_peek_desc_batch(xs->tx, pool, max_entries);
+	max_entries = xskq_cons_nb_entries(xs->tx, max_entries);
+	nb_pkts = xskq_cons_read_desc_batch(xs->tx, pool, max_entries);
 	if (!nb_pkts) {
 		xs->tx->queue_empty_descs++;
 		goto out;
@@ -404,7 +405,7 @@ u32 xsk_tx_peek_release_desc_batch(struct xsk_buff_pool *pool, u32 max_entries)
 	if (!nb_pkts)
 		goto out;
 
-	xskq_cons_release_n(xs->tx, nb_pkts);
+	xskq_cons_release_n(xs->tx, max_entries);
 	__xskq_cons_release(xs->tx);
 	xs->sk.sk_write_space(&xs->sk);
 
diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index b721795fe50c..491a18c1f786 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -278,14 +278,6 @@ static inline bool xskq_cons_peek_desc(struct xsk_queue *q,
 	return xskq_cons_read_desc(q, desc, pool);
 }
 
-static inline u32 xskq_cons_peek_desc_batch(struct xsk_queue *q, struct xsk_buff_pool *pool,
-					    u32 max)
-{
-	u32 entries = xskq_cons_nb_entries(q, max);
-
-	return xskq_cons_read_desc_batch(q, pool, entries);
-}
-
 /* To improve performance in the xskq_cons_release functions, only update local state here.
  * Reflect this to global state when we get new entries from the ring in
  * xskq_cons_get_entries() and whenever Rx or Tx processing are completed in the NAPI loop.
-- 
2.35.1

[PATCH 5.15 150/247] SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 6c254bf3b637dd4ef4f78eb78c7447419c0161d7 ]

I found that NFSD's new NFSv3 READDIRPLUS XDR encoder was screwing up
right at the end of the page array. xdr_get_next_encode_buffer() does
not compute the value of xdr->end correctly:

 * The check to see if we're on the final available page in xdr->buf
   needs to account for the space consumed by @nbytes.

 * The new xdr->end value needs to account for the portion of @nbytes
   that is to be encoded into the previous buffer.

Fixes: 2825a7f90753 ("nfsd4: allow encoding across page boundaries")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xdr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index ca10ba2626f2..85473264cccf 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -979,7 +979,11 @@ static __be32 *xdr_get_next_encode_buffer(struct xdr_stream *xdr,
 	 */
 	xdr->p = (void *)p + frag2bytes;
 	space_left = xdr->buf->buflen - xdr->buf->len;
-	xdr->end = (void *)p + min_t(int, space_left, PAGE_SIZE);
+	if (space_left - nbytes >= PAGE_SIZE)
+		xdr->end = (void *)p + PAGE_SIZE;
+	else
+		xdr->end = (void *)p + space_left - frag1bytes;
+
 	xdr->buf->page_len += frag2bytes;
 	xdr->buf->len += nbytes;
 	return p;
-- 
2.35.1

[PATCH 5.15 151/247] net: mdio: unexport __init-annotated mdio_bus_init()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 35b42dce619701f1300fb8498dae82c9bb1f0263 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean)

Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 8dc6e6269c65..2c0216fe58de 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -1011,7 +1011,6 @@ int __init mdio_bus_init(void)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(mdio_bus_init);
 
 #if IS_ENABLED(CONFIG_PHYLIB)
 void mdio_bus_exit(void)
-- 
2.35.1

[PATCH 5.15 152/247] net: xfrm: unexport __init-annotated xfrm4_protocol_init()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 4a388f08d8784af48f352193d2b72aaf167a57a1 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean)

Fixes: 2f32b51b609f ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/xfrm4_protocol.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/ipv4/xfrm4_protocol.c b/net/ipv4/xfrm4_protocol.c
index 2fe5860c21d6..b146ce88c5d0 100644
--- a/net/ipv4/xfrm4_protocol.c
+++ b/net/ipv4/xfrm4_protocol.c
@@ -304,4 +304,3 @@ void __init xfrm4_protocol_init(void)
 {
 	xfrm_input_register_afinfo(&xfrm4_input_afinfo);
 }
-EXPORT_SYMBOL(xfrm4_protocol_init);
-- 
2.35.1

[PATCH 5.15 153/247] net: ipv6: unexport __init-annotated seg6_hmac_init()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 5801f064e35181c71857a80ff18af4dbec3c5f5c ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko.

Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/seg6_hmac.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/ipv6/seg6_hmac.c b/net/ipv6/seg6_hmac.c
index 687d95dce085..5b2c9ce53395 100644
--- a/net/ipv6/seg6_hmac.c
+++ b/net/ipv6/seg6_hmac.c
@@ -399,7 +399,6 @@ int __init seg6_hmac_init(void)
 {
 	return seg6_hmac_init_algo();
 }
-EXPORT_SYMBOL(seg6_hmac_init);
 
 int __net_init seg6_hmac_net_init(struct net *net)
 {
-- 
2.35.1

[PATCH 5.15 154/247] net/mlx5: Lag, filter non compatible devices

[Greg Kroah-Hartman]

From: Mark Bloch <mbloch@nvidia.com>

[ Upstream commit bc4c2f2e017949646b43fdcad005a03462d437c6 ]

When search for a peer lag device we can filter based on that
device's capabilities.

Downstream patch will be less strict when filtering compatible devices
and remove the limitation where we require exact MLX5_MAX_PORTS and
change it to a range.

Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/dev.c | 48 +++++++++++++++----
 drivers/net/ethernet/mellanox/mlx5/core/lag.c | 12 ++---
 .../ethernet/mellanox/mlx5/core/mlx5_core.h   |  1 +
 3 files changed, 47 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
index e8093c4e09d4..94411b34799e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -544,12 +544,9 @@ static u32 mlx5_gen_pci_id(const struct mlx5_core_dev *dev)
 		     PCI_SLOT(dev->pdev->devfn));
 }
 
-static int next_phys_dev(struct device *dev, const void *data)
+static int _next_phys_dev(struct mlx5_core_dev *mdev,
+			  const struct mlx5_core_dev *curr)
 {
-	struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
-	struct mlx5_core_dev *mdev = madev->mdev;
-	const struct mlx5_core_dev *curr = data;
-
 	if (!mlx5_core_is_pf(mdev))
 		return 0;
 
@@ -562,8 +559,29 @@ static int next_phys_dev(struct device *dev, const void *data)
 	return 1;
 }
 
-/* Must be called with intf_mutex held */
-struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev)
+static int next_phys_dev(struct device *dev, const void *data)
+{
+	struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
+	struct mlx5_core_dev *mdev = madev->mdev;
+
+	return _next_phys_dev(mdev, data);
+}
+
+static int next_phys_dev_lag(struct device *dev, const void *data)
+{
+	struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
+	struct mlx5_core_dev *mdev = madev->mdev;
+
+	if (!MLX5_CAP_GEN(mdev, vport_group_manager) ||
+	    !MLX5_CAP_GEN(mdev, lag_master) ||
+	    MLX5_CAP_GEN(mdev, num_lag_ports) != MLX5_MAX_PORTS)
+		return 0;
+
+	return _next_phys_dev(mdev, data);
+}
+
+static struct mlx5_core_dev *mlx5_get_next_dev(struct mlx5_core_dev *dev,
+					       int (*match)(struct device *dev, const void *data))
 {
 	struct auxiliary_device *adev;
 	struct mlx5_adev *madev;
@@ -571,7 +589,7 @@ struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev)
 	if (!mlx5_core_is_pf(dev))
 		return NULL;
 
-	adev = auxiliary_find_device(NULL, dev, &next_phys_dev);
+	adev = auxiliary_find_device(NULL, dev, match);
 	if (!adev)
 		return NULL;
 
@@ -580,6 +598,20 @@ struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev)
 	return madev->mdev;
 }
 
+/* Must be called with intf_mutex held */
+struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev)
+{
+	lockdep_assert_held(&mlx5_intf_mutex);
+	return mlx5_get_next_dev(dev, &next_phys_dev);
+}
+
+/* Must be called with intf_mutex held */
+struct mlx5_core_dev *mlx5_get_next_phys_dev_lag(struct mlx5_core_dev *dev)
+{
+	lockdep_assert_held(&mlx5_intf_mutex);
+	return mlx5_get_next_dev(dev, &next_phys_dev_lag);
+}
+
 void mlx5_dev_list_lock(void)
 {
 	mutex_lock(&mlx5_intf_mutex);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index c19d9327095b..57d86d47ec2a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -752,12 +752,7 @@ static int __mlx5_lag_dev_add_mdev(struct mlx5_core_dev *dev)
 	struct mlx5_lag *ldev = NULL;
 	struct mlx5_core_dev *tmp_dev;
 
-	if (!MLX5_CAP_GEN(dev, vport_group_manager) ||
-	    !MLX5_CAP_GEN(dev, lag_master) ||
-	    MLX5_CAP_GEN(dev, num_lag_ports) != MLX5_MAX_PORTS)
-		return 0;
-
-	tmp_dev = mlx5_get_next_phys_dev(dev);
+	tmp_dev = mlx5_get_next_phys_dev_lag(dev);
 	if (tmp_dev)
 		ldev = tmp_dev->priv.lag;
 
@@ -802,6 +797,11 @@ void mlx5_lag_add_mdev(struct mlx5_core_dev *dev)
 {
 	int err;
 
+	if (!MLX5_CAP_GEN(dev, vport_group_manager) ||
+	    !MLX5_CAP_GEN(dev, lag_master) ||
+	    MLX5_CAP_GEN(dev, num_lag_ports) != MLX5_MAX_PORTS)
+		return;
+
 recheck:
 	mlx5_dev_list_lock();
 	err = __mlx5_lag_dev_add_mdev(dev);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 230eab7e3bc9..3f3ea8d268ce 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -186,6 +186,7 @@ void mlx5_detach_device(struct mlx5_core_dev *dev);
 int mlx5_register_device(struct mlx5_core_dev *dev);
 void mlx5_unregister_device(struct mlx5_core_dev *dev);
 struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev);
+struct mlx5_core_dev *mlx5_get_next_phys_dev_lag(struct mlx5_core_dev *dev);
 void mlx5_dev_list_lock(void);
 void mlx5_dev_list_unlock(void);
 int mlx5_dev_list_trylock(void);
-- 
2.35.1

[PATCH 5.15 155/247] net/mlx5: Fix mlx5_get_next_dev() peer device matching

[Greg Kroah-Hartman]

From: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit 1c5de097bea31760c3f0467ac0c84ba0dc3525d5 ]

In some use-cases, mlx5 instances will need to search for their peer
device (the other port on the same HCA). For that, mlx5 device matching
mechanism relied on auxiliary_find_device() to search, and used a bad matching
callback function.

This approach has two issues:

1) next_phys_dev() the matching function, assumed all devices are
   of the type mlx5_adev (mlx5 auxiliary device) which is wrong and
   could lead to crashes, this worked for a while, since only lately
   other drivers started registering auxiliary devices.

2) using the auxiliary class bus (auxiliary_find_device) to search for
   mlx5_core_dev devices, who are actually PCIe device instances, is wrong.
   This works since mlx5_core always has at least one mlx5_adev instance
   hanging around in the aux bus.

As suggested by others we can fix 1. by comparing device names prefixes
if they have the string "mlx5_core" in them, which is not a best practice !
but even with that fixed, still 2. needs fixing, we are trying to
match pcie device peers so we should look in the right bus (pci bus),
hence this fix.

The fix:
1) search the pci bus for mlx5 peer devices, instead of the aux bus
2) to validated devices are the same type "mlx5_core_dev" compare if
   they have the same driver, which is bulletproof.

   This wouldn't have worked with the aux bus since the various mlx5 aux
   device types don't share the same driver, even if they share the same device
   wrapper struct (mlx5_adev) "which helped to find the parent device"

Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reported-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/dev.c | 34 +++++++++++++------
 1 file changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
index 94411b34799e..949f12ede3d2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -559,18 +559,32 @@ static int _next_phys_dev(struct mlx5_core_dev *mdev,
 	return 1;
 }
 
+static void *pci_get_other_drvdata(struct device *this, struct device *other)
+{
+	if (this->driver != other->driver)
+		return NULL;
+
+	return pci_get_drvdata(to_pci_dev(other));
+}
+
 static int next_phys_dev(struct device *dev, const void *data)
 {
-	struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
-	struct mlx5_core_dev *mdev = madev->mdev;
+	struct mlx5_core_dev *mdev, *this = (struct mlx5_core_dev *)data;
+
+	mdev = pci_get_other_drvdata(this->device, dev);
+	if (!mdev)
+		return 0;
 
 	return _next_phys_dev(mdev, data);
 }
 
 static int next_phys_dev_lag(struct device *dev, const void *data)
 {
-	struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
-	struct mlx5_core_dev *mdev = madev->mdev;
+	struct mlx5_core_dev *mdev, *this = (struct mlx5_core_dev *)data;
+
+	mdev = pci_get_other_drvdata(this->device, dev);
+	if (!mdev)
+		return 0;
 
 	if (!MLX5_CAP_GEN(mdev, vport_group_manager) ||
 	    !MLX5_CAP_GEN(mdev, lag_master) ||
@@ -583,19 +597,17 @@ static int next_phys_dev_lag(struct device *dev, const void *data)
 static struct mlx5_core_dev *mlx5_get_next_dev(struct mlx5_core_dev *dev,
 					       int (*match)(struct device *dev, const void *data))
 {
-	struct auxiliary_device *adev;
-	struct mlx5_adev *madev;
+	struct device *next;
 
 	if (!mlx5_core_is_pf(dev))
 		return NULL;
 
-	adev = auxiliary_find_device(NULL, dev, match);
-	if (!adev)
+	next = bus_find_device(&pci_bus_type, NULL, dev, match);
+	if (!next)
 		return NULL;
 
-	madev = container_of(adev, struct mlx5_adev, adev);
-	put_device(&adev->dev);
-	return madev->mdev;
+	put_device(next);
+	return pci_get_drvdata(to_pci_dev(next));
 }
 
 /* Must be called with intf_mutex held */
-- 
2.35.1

[PATCH 5.15 156/247] net/mlx5: Rearm the FW tracer after each tracer event

[Greg Kroah-Hartman]

From: Feras Daoud <ferasda@nvidia.com>

[ Upstream commit 8bf94e6414c9481bfa28269022688ab445d0081d ]

The current design does not arm the tracer if traces are available before
the tracer string database is fully loaded, leading to an unfunctional tracer.
This fix will rearm the tracer every time the FW triggers tracer event
regardless of the tracer strings database status.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
index f9cf9fb31547..ea46152816f9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -675,6 +675,9 @@ static void mlx5_fw_tracer_handle_traces(struct work_struct *work)
 	if (!tracer->owner)
 		return;
 
+	if (unlikely(!tracer->str_db.loaded))
+		goto arm;
+
 	block_count = tracer->buff.size / TRACER_BLOCK_SIZE_BYTE;
 	start_offset = tracer->buff.consumer_index * TRACER_BLOCK_SIZE_BYTE;
 
@@ -732,6 +735,7 @@ static void mlx5_fw_tracer_handle_traces(struct work_struct *work)
 						      &tmp_trace_block[TRACES_PER_BLOCK - 1]);
 	}
 
+arm:
 	mlx5_fw_tracer_arm(dev);
 }
 
@@ -1137,8 +1141,7 @@ static int fw_tracer_event(struct notifier_block *nb, unsigned long action, void
 		queue_work(tracer->work_queue, &tracer->ownership_change_work);
 		break;
 	case MLX5_TRACER_SUBTYPE_TRACES_AVAILABLE:
-		if (likely(tracer->str_db.loaded))
-			queue_work(tracer->work_queue, &tracer->handle_traces_work);
+		queue_work(tracer->work_queue, &tracer->handle_traces_work);
 		break;
 	default:
 		mlx5_core_dbg(dev, "FWTracer: Event with unrecognized subtype: sub_type %d\n",
-- 
2.35.1

[PATCH 5.15 157/247] net/mlx5: fs, fail conflicting actions

[Greg Kroah-Hartman]

From: Mark Bloch <mbloch@nvidia.com>

[ Upstream commit 8fa5e7b20e01042b14f8cd684d2da9b638460c74 ]

When combining two steering rules into one check
not only do they share the same actions but those
actions are also the same. This resolves an issue where
when creating two different rules with the same match
the actions are overwritten and one of the rules is deleted
a FW syndrome can be seen in dmesg.

mlx5_core 0000:03:00.0: mlx5_cmd_check:819:(pid 2105): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444)

Fixes: 0d235c3fabb7 ("net/mlx5: Add hash table to search FTEs in a flow-group")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/fs_core.c | 35 +++++++++++++++++--
 1 file changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index 379130ed300c..cb3f9de3d00b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1527,9 +1527,22 @@ static struct mlx5_flow_rule *find_flow_rule(struct fs_fte *fte,
 	return NULL;
 }
 
-static bool check_conflicting_actions(u32 action1, u32 action2)
+static bool check_conflicting_actions_vlan(const struct mlx5_fs_vlan *vlan0,
+					   const struct mlx5_fs_vlan *vlan1)
 {
-	u32 xored_actions = action1 ^ action2;
+	return vlan0->ethtype != vlan1->ethtype ||
+	       vlan0->vid != vlan1->vid ||
+	       vlan0->prio != vlan1->prio;
+}
+
+static bool check_conflicting_actions(const struct mlx5_flow_act *act1,
+				      const struct mlx5_flow_act *act2)
+{
+	u32 action1 = act1->action;
+	u32 action2 = act2->action;
+	u32 xored_actions;
+
+	xored_actions = action1 ^ action2;
 
 	/* if one rule only wants to count, it's ok */
 	if (action1 == MLX5_FLOW_CONTEXT_ACTION_COUNT ||
@@ -1546,6 +1559,22 @@ static bool check_conflicting_actions(u32 action1, u32 action2)
 			     MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2))
 		return true;
 
+	if (action1 & MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT &&
+	    act1->pkt_reformat != act2->pkt_reformat)
+		return true;
+
+	if (action1 & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR &&
+	    act1->modify_hdr != act2->modify_hdr)
+		return true;
+
+	if (action1 & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH &&
+	    check_conflicting_actions_vlan(&act1->vlan[0], &act2->vlan[0]))
+		return true;
+
+	if (action1 & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2 &&
+	    check_conflicting_actions_vlan(&act1->vlan[1], &act2->vlan[1]))
+		return true;
+
 	return false;
 }
 
@@ -1553,7 +1582,7 @@ static int check_conflicting_ftes(struct fs_fte *fte,
 				  const struct mlx5_flow_context *flow_context,
 				  const struct mlx5_flow_act *flow_act)
 {
-	if (check_conflicting_actions(flow_act->action, fte->action.action)) {
+	if (check_conflicting_actions(flow_act, &fte->action)) {
 		mlx5_core_warn(get_dev(&fte->node),
 			       "Found two FTEs with conflicting actions\n");
 		return -EEXIST;
-- 
2.35.1

[PATCH 5.15 158/247] ip_gre: test csum_start instead of transport header

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit 8d21e9963bec1aad2280cdd034c8993033ef2948 ]

GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.

ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was

	if (csum && skb_checksum_start(skb) < skb->data)
		return -EINVAL;

This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward

	if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
	    skb_checksum_start(skb) < skb->data)
		return -EINVAL;

But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
  uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
  in skb_partial_csum_set in the normal header_ops datapath.

Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.

Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250f911 ("ip_gre: validate csum_start only on pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_gre.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 276a3b7b0e9c..f23528c77539 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -629,21 +629,20 @@ static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
 	}
 
 	if (dev->header_ops) {
-		const int pull_len = tunnel->hlen + sizeof(struct iphdr);
-
 		if (skb_cow_head(skb, 0))
 			goto free_skb;
 
 		tnl_params = (const struct iphdr *)skb->data;
 
-		if (pull_len > skb_transport_offset(skb))
-			goto free_skb;
-
 		/* Pull skb since ip_tunnel_xmit() needs skb->data pointing
 		 * to gre header.
 		 */
-		skb_pull(skb, pull_len);
+		skb_pull(skb, tunnel->hlen + sizeof(struct iphdr));
 		skb_reset_mac_header(skb);
+
+		if (skb->ip_summed == CHECKSUM_PARTIAL &&
+		    skb_checksum_start(skb) < skb->data)
+			goto free_skb;
 	} else {
 		if (skb_cow_head(skb, dev->needed_headroom))
 			goto free_skb;
-- 
2.35.1

[PATCH 5.15 159/247] net: altera: Fix refcount leak in altera_tse_mdio_create

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 11ec18b1d8d92b9df307d31950dcba0b3dd7283c ]

Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/altera/altera_tse_main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 804b37c76b1e..b51f5b9577e0 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -163,7 +163,8 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
 	mdio = mdiobus_alloc();
 	if (mdio == NULL) {
 		netdev_err(dev, "Error allocating MDIO bus\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto put_node;
 	}
 
 	mdio->name = ALTERA_TSE_RESOURCE_NAME;
@@ -180,6 +181,7 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
 			   mdio->id);
 		goto out_free_mdio;
 	}
+	of_node_put(mdio_node);
 
 	if (netif_msg_drv(priv))
 		netdev_info(dev, "MDIO bus %s: created\n", mdio->id);
@@ -189,6 +191,8 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
 out_free_mdio:
 	mdiobus_free(mdio);
 	mdio = NULL;
+put_node:
+	of_node_put(mdio_node);
 	return ret;
 }
 
-- 
2.35.1

[PATCH 5.15 160/247] net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

[ Upstream commit 47e96930d6e6106d5252e85b868d3c7e29296de0 ]

Commit ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN
is bypassed") added the ability to link if AN was bypassed, and added
filling of state->an_complete field, but set it to true if AN was
enabled in BMCR, not when AN was reported complete in BMSR.

This was done because for some reason, when I wanted to use BMSR value
to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was
always 1), instead of BMSR_ANEGCOMPLETE bit.

Use BMSR_ANEGCOMPLETE for filling state->an_complete.

Fixes: ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/serdes.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 2b05ead515cd..6ae7a0ed9e0b 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -50,22 +50,17 @@ static int mv88e6390_serdes_write(struct mv88e6xxx_chip *chip,
 }
 
 static int mv88e6xxx_serdes_pcs_get_state(struct mv88e6xxx_chip *chip,
-					  u16 ctrl, u16 status, u16 lpa,
+					  u16 bmsr, u16 lpa, u16 status,
 					  struct phylink_link_state *state)
 {
 	state->link = !!(status & MV88E6390_SGMII_PHY_STATUS_LINK);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
 
 	if (status & MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID) {
 		/* The Spped and Duplex Resolved register is 1 if AN is enabled
 		 * and complete, or if AN is disabled. So with disabled AN we
-		 * still get here on link up. But we want to set an_complete
-		 * only if AN was enabled, thus we look at BMCR_ANENABLE.
-		 * (According to 802.3-2008 section 22.2.4.2.10, we should be
-		 *  able to get this same value from BMSR_ANEGCAPABLE, but tests
-		 *  show that these Marvell PHYs don't conform to this part of
-		 *  the specificaion - BMSR_ANEGCAPABLE is simply always 1.)
+		 * still get here on link up.
 		 */
-		state->an_complete = !!(ctrl & BMCR_ANENABLE);
 		state->duplex = status &
 				MV88E6390_SGMII_PHY_STATUS_DUPLEX_FULL ?
 			                         DUPLEX_FULL : DUPLEX_HALF;
@@ -191,12 +186,12 @@ int mv88e6352_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 				   int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
-	err = mv88e6352_serdes_read(chip, MII_BMCR, &ctrl);
+	err = mv88e6352_serdes_read(chip, MII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes BMSR: %d\n", err);
 		return err;
 	}
 
@@ -212,7 +207,7 @@ int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 int mv88e6352_serdes_pcs_an_restart(struct mv88e6xxx_chip *chip, int port,
@@ -915,13 +910,13 @@ int mv88e6390_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 	int port, int lane, struct phylink_link_state *state)
 {
-	u16 lpa, status, ctrl;
+	u16 bmsr, lpa, status;
 	int err;
 
 	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-				    MV88E6390_SGMII_BMCR, &ctrl);
+				    MV88E6390_SGMII_BMSR, &bmsr);
 	if (err) {
-		dev_err(chip->dev, "can't read Serdes PHY control: %d\n", err);
+		dev_err(chip->dev, "can't read Serdes PHY BMSR: %d\n", err);
 		return err;
 	}
 
@@ -939,7 +934,7 @@ static int mv88e6390_serdes_pcs_get_state_sgmii(struct mv88e6xxx_chip *chip,
 		return err;
 	}
 
-	return mv88e6xxx_serdes_pcs_get_state(chip, ctrl, status, lpa, state);
+	return mv88e6xxx_serdes_pcs_get_state(chip, bmsr, lpa, status, state);
 }
 
 static int mv88e6390_serdes_pcs_get_state_10g(struct mv88e6xxx_chip *chip,
-- 
2.35.1

[PATCH 5.15 161/247] tcp: use alloc_large_system_hash() to allocate table_perturb

[Greg Kroah-Hartman]

From: Muchun Song <songmuchun@bytedance.com>

[ Upstream commit e67b72b90b7e19a4be4d9c29f3feea6f58ab43f8 ]

In our server, there may be no high order (>= 6) memory since we reserve
lots of HugeTLB pages when booting.  Then the system panic.  So use
alloc_large_system_hash() to allocate table_perturb.

Fixes: e9261476184b ("tcp: dynamically allocate the perturb table used by source ports")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index ee9c587031b4..342f3df77835 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -917,10 +917,12 @@ void __init inet_hashinfo2_init(struct inet_hashinfo *h, const char *name,
 	init_hashinfo_lhash2(h);
 
 	/* this one is used for source ports of outgoing connections */
-	table_perturb = kmalloc_array(INET_TABLE_PERTURB_SIZE,
-				      sizeof(*table_perturb), GFP_KERNEL);
-	if (!table_perturb)
-		panic("TCP: failed to alloc table_perturb");
+	table_perturb = alloc_large_system_hash("Table-perturb",
+						sizeof(*table_perturb),
+						INET_TABLE_PERTURB_SIZE,
+						0, 0, NULL, NULL,
+						INET_TABLE_PERTURB_SIZE,
+						INET_TABLE_PERTURB_SIZE);
 }
 
 int inet_hashinfo2_init_mod(struct inet_hashinfo *h)
-- 
2.35.1

[PATCH 5.15 162/247] drm: imx: fix compiler warning with gcc-12

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 7aefd8b53815274f3ef398d370a3c9b27dd9f00c ]

Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:

  drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
  drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
     72 |                 if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
        |                     ^

due to the extraneous '&' address-of operator.

Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.

Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 9c8829f945b2..f7863d6dea80 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -69,7 +69,7 @@ static void ipu_crtc_disable_planes(struct ipu_crtc *ipu_crtc,
 	drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) {
 		if (plane == &ipu_crtc->plane[0]->base)
 			disable_full = true;
-		if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
+		if (ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
 			disable_partial = true;
 	}
 
-- 
2.35.1

[PATCH 5.15 163/247] nfp: flower: restructure flow-key for gre+vlan combination

[Greg Kroah-Hartman]

From: Etienne van der Linde <etienne.vanderlinde@corigine.com>

[ Upstream commit a0b843340dae704e17c1ddfad0f85c583c36757f ]

Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.

Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/netronome/nfp/flower/conntrack.c | 32 +++++++++----------
 .../net/ethernet/netronome/nfp/flower/match.c | 16 +++++-----
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c
index bfd7d1c35076..7e9fcc16286e 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/conntrack.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/conntrack.c
@@ -442,6 +442,11 @@ nfp_fl_calc_key_layers_sz(struct nfp_fl_key_ls in_key_ls, uint16_t *map)
 		key_size += sizeof(struct nfp_flower_ipv6);
 	}
 
+	if (in_key_ls.key_layer_two & NFP_FLOWER_LAYER2_QINQ) {
+		map[FLOW_PAY_QINQ] = key_size;
+		key_size += sizeof(struct nfp_flower_vlan);
+	}
+
 	if (in_key_ls.key_layer_two & NFP_FLOWER_LAYER2_GRE) {
 		map[FLOW_PAY_GRE] = key_size;
 		if (in_key_ls.key_layer_two & NFP_FLOWER_LAYER2_TUN_IPV6)
@@ -450,11 +455,6 @@ nfp_fl_calc_key_layers_sz(struct nfp_fl_key_ls in_key_ls, uint16_t *map)
 			key_size += sizeof(struct nfp_flower_ipv4_gre_tun);
 	}
 
-	if (in_key_ls.key_layer_two & NFP_FLOWER_LAYER2_QINQ) {
-		map[FLOW_PAY_QINQ] = key_size;
-		key_size += sizeof(struct nfp_flower_vlan);
-	}
-
 	if ((in_key_ls.key_layer & NFP_FLOWER_LAYER_VXLAN) ||
 	    (in_key_ls.key_layer_two & NFP_FLOWER_LAYER2_GENEVE)) {
 		map[FLOW_PAY_UDP_TUN] = key_size;
@@ -693,6 +693,17 @@ static int nfp_fl_ct_add_offload(struct nfp_fl_nft_tc_merge *m_entry)
 		}
 	}
 
+	if (NFP_FLOWER_LAYER2_QINQ & key_layer.key_layer_two) {
+		offset = key_map[FLOW_PAY_QINQ];
+		key = kdata + offset;
+		msk = mdata + offset;
+		for (i = 0; i < _CT_TYPE_MAX; i++) {
+			nfp_flower_compile_vlan((struct nfp_flower_vlan *)key,
+						(struct nfp_flower_vlan *)msk,
+						rules[i]);
+		}
+	}
+
 	if (key_layer.key_layer_two & NFP_FLOWER_LAYER2_GRE) {
 		offset = key_map[FLOW_PAY_GRE];
 		key = kdata + offset;
@@ -733,17 +744,6 @@ static int nfp_fl_ct_add_offload(struct nfp_fl_nft_tc_merge *m_entry)
 		}
 	}
 
-	if (NFP_FLOWER_LAYER2_QINQ & key_layer.key_layer_two) {
-		offset = key_map[FLOW_PAY_QINQ];
-		key = kdata + offset;
-		msk = mdata + offset;
-		for (i = 0; i < _CT_TYPE_MAX; i++) {
-			nfp_flower_compile_vlan((struct nfp_flower_vlan *)key,
-						(struct nfp_flower_vlan *)msk,
-						rules[i]);
-		}
-	}
-
 	if (key_layer.key_layer & NFP_FLOWER_LAYER_VXLAN ||
 	    key_layer.key_layer_two & NFP_FLOWER_LAYER2_GENEVE) {
 		offset = key_map[FLOW_PAY_UDP_TUN];
diff --git a/drivers/net/ethernet/netronome/nfp/flower/match.c b/drivers/net/ethernet/netronome/nfp/flower/match.c
index 9d86eea4dc16..fb8bd2135c63 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/match.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/match.c
@@ -602,6 +602,14 @@ int nfp_flower_compile_flow_match(struct nfp_app *app,
 		msk += sizeof(struct nfp_flower_ipv6);
 	}
 
+	if (NFP_FLOWER_LAYER2_QINQ & key_ls->key_layer_two) {
+		nfp_flower_compile_vlan((struct nfp_flower_vlan *)ext,
+					(struct nfp_flower_vlan *)msk,
+					rule);
+		ext += sizeof(struct nfp_flower_vlan);
+		msk += sizeof(struct nfp_flower_vlan);
+	}
+
 	if (key_ls->key_layer_two & NFP_FLOWER_LAYER2_GRE) {
 		if (key_ls->key_layer_two & NFP_FLOWER_LAYER2_TUN_IPV6) {
 			struct nfp_flower_ipv6_gre_tun *gre_match;
@@ -637,14 +645,6 @@ int nfp_flower_compile_flow_match(struct nfp_app *app,
 		}
 	}
 
-	if (NFP_FLOWER_LAYER2_QINQ & key_ls->key_layer_two) {
-		nfp_flower_compile_vlan((struct nfp_flower_vlan *)ext,
-					(struct nfp_flower_vlan *)msk,
-					rule);
-		ext += sizeof(struct nfp_flower_vlan);
-		msk += sizeof(struct nfp_flower_vlan);
-	}
-
 	if (key_ls->key_layer & NFP_FLOWER_LAYER_VXLAN ||
 	    key_ls->key_layer_two & NFP_FLOWER_LAYER2_GENEVE) {
 		if (key_ls->key_layer_two & NFP_FLOWER_LAYER2_TUN_IPV6) {
-- 
2.35.1

[PATCH 5.15 164/247] iov_iter: Fix iter_xarray_get_pages{,_alloc}()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 6c77676645ad42993e0a8bdb8dafa517851a352a ]

The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page.  Various terms of the equation cancel out
and you end up with actual == offset.  The same issue exists in
iter_xarray_get_pages_alloc().

Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.

This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it.  Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.

Fixes: 7ff5062079ef ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/iov_iter.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 6d146f77601d..be07eb24ab2f 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -1436,7 +1436,7 @@ static ssize_t iter_xarray_get_pages(struct iov_iter *i,
 {
 	unsigned nr, offset;
 	pgoff_t index, count;
-	size_t size = maxsize, actual;
+	size_t size = maxsize;
 	loff_t pos;
 
 	if (!size || !maxpages)
@@ -1463,13 +1463,7 @@ static ssize_t iter_xarray_get_pages(struct iov_iter *i,
 	if (nr == 0)
 		return 0;
 
-	actual = PAGE_SIZE * nr;
-	actual -= offset;
-	if (nr == count && size > 0) {
-		unsigned last_offset = (nr > 1) ? 0 : offset;
-		actual -= PAGE_SIZE - (last_offset + size);
-	}
-	return actual;
+	return min(nr * PAGE_SIZE - offset, maxsize);
 }
 
 /* must be done on non-empty ITER_IOVEC one */
@@ -1604,7 +1598,7 @@ static ssize_t iter_xarray_get_pages_alloc(struct iov_iter *i,
 	struct page **p;
 	unsigned nr, offset;
 	pgoff_t index, count;
-	size_t size = maxsize, actual;
+	size_t size = maxsize;
 	loff_t pos;
 
 	if (!size)
@@ -1633,13 +1627,7 @@ static ssize_t iter_xarray_get_pages_alloc(struct iov_iter *i,
 	if (nr == 0)
 		return 0;
 
-	actual = PAGE_SIZE * nr;
-	actual -= offset;
-	if (nr == count && size > 0) {
-		unsigned last_offset = (nr > 1) ? 0 : offset;
-		actual -= PAGE_SIZE - (last_offset + size);
-	}
-	return actual;
+	return min(nr * PAGE_SIZE - offset, maxsize);
 }
 
 ssize_t iov_iter_get_pages_alloc(struct iov_iter *i,
-- 
2.35.1

[PATCH 5.15 164/247] iov_iter: Fix iter_xarray_get_pages{,_alloc}()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 6c77676645ad42993e0a8bdb8dafa517851a352a ]

The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page.  Various terms of the equation cancel out
and you end up with actual == offset.  The same issue exists in
iter_xarray_get_pages_alloc().

Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.

This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it.  Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.

Fixes: 7ff5062079ef ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/iov_iter.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 6d146f77601d..be07eb24ab2f 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -1436,7 +1436,7 @@ static ssize_t iter_xarray_get_pages(struct iov_iter *i,
 {
 	unsigned nr, offset;
 	pgoff_t index, count;
-	size_t size = maxsize, actual;
+	size_t size = maxsize;
 	loff_t pos;
 
 	if (!size || !maxpages)
@@ -1463,13 +1463,7 @@ static ssize_t iter_xarray_get_pages(struct iov_iter *i,
 	if (nr == 0)
 		return 0;
 
-	actual = PAGE_SIZE * nr;
-	actual -= offset;
-	if (nr == count && size > 0) {
-		unsigned last_offset = (nr > 1) ? 0 : offset;
-		actual -= PAGE_SIZE - (last_offset + size);
-	}
-	return actual;
+	return min(nr * PAGE_SIZE - offset, maxsize);
 }
 
 /* must be done on non-empty ITER_IOVEC one */
@@ -1604,7 +1598,7 @@ static ssize_t iter_xarray_get_pages_alloc(struct iov_iter *i,
 	struct page **p;
 	unsigned nr, offset;
 	pgoff_t index, count;
-	size_t size = maxsize, actual;
+	size_t size = maxsize;
 	loff_t pos;
 
 	if (!size)
@@ -1633,13 +1627,7 @@ static ssize_t iter_xarray_get_pages_alloc(struct iov_iter *i,
 	if (nr == 0)
 		return 0;
 
-	actual = PAGE_SIZE * nr;
-	actual -= offset;
-	if (nr == count && size > 0) {
-		unsigned last_offset = (nr > 1) ? 0 : offset;
-		actual -= PAGE_SIZE - (last_offset + size);
-	}
-	return actual;
+	return min(nr * PAGE_SIZE - offset, maxsize);
 }
 
 ssize_t iov_iter_get_pages_alloc(struct iov_iter *i,
-- 
2.35.1

[PATCH 5.15 165/247] iio: dummy: iio_simple_dummy: check the return value of kstrdup()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit ba93642188a6fed754bf7447f638bc410e05a929 ]

kstrdup() is also a memory allocation-related function, it returns NULL
when some memory errors happen. So it is better to check the return
value of it so to catch the memory error in time. Besides, there should
have a kfree() to clear up the allocation if we get a failure later in
this function to prevent memory leak.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dummy/iio_simple_dummy.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/dummy/iio_simple_dummy.c b/drivers/iio/dummy/iio_simple_dummy.c
index c0b7ef900735..c24f609c2ade 100644
--- a/drivers/iio/dummy/iio_simple_dummy.c
+++ b/drivers/iio/dummy/iio_simple_dummy.c
@@ -575,10 +575,9 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	 */
 
 	swd = kzalloc(sizeof(*swd), GFP_KERNEL);
-	if (!swd) {
-		ret = -ENOMEM;
-		goto error_kzalloc;
-	}
+	if (!swd)
+		return ERR_PTR(-ENOMEM);
+
 	/*
 	 * Allocate an IIO device.
 	 *
@@ -590,7 +589,7 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	indio_dev = iio_device_alloc(parent, sizeof(*st));
 	if (!indio_dev) {
 		ret = -ENOMEM;
-		goto error_ret;
+		goto error_free_swd;
 	}
 
 	st = iio_priv(indio_dev);
@@ -616,6 +615,10 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	 *    indio_dev->name = spi_get_device_id(spi)->name;
 	 */
 	indio_dev->name = kstrdup(name, GFP_KERNEL);
+	if (!indio_dev->name) {
+		ret = -ENOMEM;
+		goto error_free_device;
+	}
 
 	/* Provide description of available channels */
 	indio_dev->channels = iio_dummy_channels;
@@ -632,7 +635,7 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 
 	ret = iio_simple_dummy_events_register(indio_dev);
 	if (ret < 0)
-		goto error_free_device;
+		goto error_free_name;
 
 	ret = iio_simple_dummy_configure_buffer(indio_dev);
 	if (ret < 0)
@@ -649,11 +652,12 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	iio_simple_dummy_unconfigure_buffer(indio_dev);
 error_unregister_events:
 	iio_simple_dummy_events_unregister(indio_dev);
+error_free_name:
+	kfree(indio_dev->name);
 error_free_device:
 	iio_device_free(indio_dev);
-error_ret:
+error_free_swd:
 	kfree(swd);
-error_kzalloc:
 	return ERR_PTR(ret);
 }
 
-- 
2.35.1

[PATCH 5.15 166/247] staging: rtl8712: fix a potential memory leak in r871xu_drv_init()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit 7288ff561de650d4139fab80e9cb0da9b5b32434 ]

In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory
allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not
properly released as there is no action will be performed by
r8712_usb_dvobj_deinit().
To properly release it, we should call r8712_free_io_queue() in
r8712_usb_dvobj_deinit().

Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called
by r871x_dev_unload() under condition `padapter->bup` and
r8712_free_io_queue() is called by r8712_free_drv_sw().
However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and
calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for
better understading the code.
So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove
r8712_free_io_queue() from r8712_free_drv_sw().

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_B8048C592777830380A23A7C4409F9DF1305@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8712/os_intfs.c | 1 -
 drivers/staging/rtl8712/usb_intf.c | 6 +++---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c
index 9502f6aa5306..bc033849fcea 100644
--- a/drivers/staging/rtl8712/os_intfs.c
+++ b/drivers/staging/rtl8712/os_intfs.c
@@ -332,7 +332,6 @@ void r8712_free_drv_sw(struct _adapter *padapter)
 	r8712_free_evt_priv(&padapter->evtpriv);
 	r8712_DeInitSwLeds(padapter);
 	r8712_free_mlme_priv(&padapter->mlmepriv);
-	r8712_free_io_queue(padapter);
 	_free_xmit_priv(&padapter->xmitpriv);
 	_r8712_free_sta_priv(&padapter->stapriv);
 	_r8712_free_recv_priv(&padapter->recvpriv);
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index cae04272deff..a61dd96ab2a4 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -265,6 +265,7 @@ static uint r8712_usb_dvobj_init(struct _adapter *padapter)
 
 static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
 {
+	r8712_free_io_queue(padapter);
 }
 
 void rtl871x_intf_stop(struct _adapter *padapter)
@@ -302,9 +303,6 @@ void r871x_dev_unload(struct _adapter *padapter)
 			rtl8712_hal_deinit(padapter);
 		}
 
-		/*s6.*/
-		if (padapter->dvobj_deinit)
-			padapter->dvobj_deinit(padapter);
 		padapter->bup = false;
 	}
 }
@@ -607,6 +605,8 @@ static void r871xu_dev_remove(struct usb_interface *pusb_intf)
 	/* Stop driver mlme relation timer */
 	r8712_stop_drv_timers(padapter);
 	r871x_dev_unload(padapter);
+	if (padapter->dvobj_deinit)
+		padapter->dvobj_deinit(padapter);
 	r8712_free_drv_sw(padapter);
 	free_netdev(pnetdev);
 
-- 
2.35.1

[PATCH 5.15 167/247] iio: st_sensors: Add a local lock for protecting odr

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ]

Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache
2- avoid changing samplig frequency whilst buffer is running

Let's start by handling situation #1 with a local lock.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../iio/common/st_sensors/st_sensors_core.c   | 24 ++++++++++++++-----
 include/linux/iio/common/st_sensors.h         |  3 +++
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0bbb090b108c..aff981551617 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -71,16 +71,18 @@ static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
 
 int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 {
-	int err;
+	int err = 0;
 	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
+	mutex_lock(&sdata->odr_lock);
+
 	if (!sdata->sensor_settings->odr.mask)
-		return 0;
+		goto unlock_mutex;
 
 	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
 	if (err < 0)
-		goto st_sensors_match_odr_error;
+		goto unlock_mutex;
 
 	if ((sdata->sensor_settings->odr.addr ==
 					sdata->sensor_settings->pw.addr) &&
@@ -103,7 +105,9 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 	if (err >= 0)
 		sdata->odr = odr_out.hz;
 
-st_sensors_match_odr_error:
+unlock_mutex:
+	mutex_unlock(&sdata->odr_lock);
+
 	return err;
 }
 EXPORT_SYMBOL(st_sensors_set_odr);
@@ -365,6 +369,8 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	struct st_sensors_platform_data *of_pdata;
 	int err = 0;
 
+	mutex_init(&sdata->odr_lock);
+
 	/* If OF/DT pdata exists, it will take precedence of anything else */
 	of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata);
 	if (IS_ERR(of_pdata))
@@ -558,18 +564,24 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 		err = -EBUSY;
 		goto out;
 	} else {
+		mutex_lock(&sdata->odr_lock);
 		err = st_sensors_set_enable(indio_dev, true);
-		if (err < 0)
+		if (err < 0) {
+			mutex_unlock(&sdata->odr_lock);
 			goto out;
+		}
 
 		msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
 		err = st_sensors_read_axis_data(indio_dev, ch, val);
-		if (err < 0)
+		if (err < 0) {
+			mutex_unlock(&sdata->odr_lock);
 			goto out;
+		}
 
 		*val = *val >> ch->scan_type.shift;
 
 		err = st_sensors_set_enable(indio_dev, false);
+		mutex_unlock(&sdata->odr_lock);
 	}
 out:
 	mutex_unlock(&indio_dev->mlock);
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 8bdbaf3f3796..69f4a1f6b536 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -238,6 +238,7 @@ struct st_sensor_settings {
  * @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
  * @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
  * @buffer_data: Data used by buffer part.
+ * @odr_lock: Local lock for preventing concurrent ODR accesses/changes
  */
 struct st_sensor_data {
 	struct device *dev;
@@ -263,6 +264,8 @@ struct st_sensor_data {
 	s64 hw_timestamp;
 
 	char buffer_data[ST_SENSORS_MAX_BUFFER_SIZE] ____cacheline_aligned;
+
+	struct mutex odr_lock;
 };
 
 #ifdef CONFIG_IIO_BUFFER
-- 
2.35.1

[PATCH 5.15 168/247] lkdtm/usercopy: Expand size of "out of frame" object

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit f387e86d3a74407bdd9c5815820ac9d060962840 ]

To be sufficiently out of range for the usercopy test to see the lifetime
mismatch, expand the size of the "bad" buffer, which will let it be
beyond current_stack_pointer regardless of stack growth direction.
Paired with the recent addition of stack depth checking under
CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again.

Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/lkml/762faf1b-0443-5ddf-4430-44a20cf2ec4d@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/lkdtm/usercopy.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/lkdtm/usercopy.c b/drivers/misc/lkdtm/usercopy.c
index 9161ce7ed47a..3fead5efe523 100644
--- a/drivers/misc/lkdtm/usercopy.c
+++ b/drivers/misc/lkdtm/usercopy.c
@@ -30,12 +30,12 @@ static const unsigned char test_text[] = "This is a test.\n";
  */
 static noinline unsigned char *trick_compiler(unsigned char *stack)
 {
-	return stack + 0;
+	return stack + unconst;
 }
 
 static noinline unsigned char *do_usercopy_stack_callee(int value)
 {
-	unsigned char buf[32];
+	unsigned char buf[128];
 	int i;
 
 	/* Exercise stack to avoid everything living in registers. */
@@ -43,7 +43,12 @@ static noinline unsigned char *do_usercopy_stack_callee(int value)
 		buf[i] = value & 0xff;
 	}
 
-	return trick_compiler(buf);
+	/*
+	 * Put the target buffer in the middle of stack allocation
+	 * so that we don't step on future stack users regardless
+	 * of stack growth direction.
+	 */
+	return trick_compiler(&buf[(128/2)-32]);
 }
 
 static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
@@ -66,6 +71,12 @@ static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
 		bad_stack -= sizeof(unsigned long);
 	}
 
+#ifdef ARCH_HAS_CURRENT_STACK_POINTER
+	pr_info("stack     : %px\n", (void *)current_stack_pointer);
+#endif
+	pr_info("good_stack: %px-%px\n", good_stack, good_stack + sizeof(good_stack));
+	pr_info("bad_stack : %px-%px\n", bad_stack, bad_stack + sizeof(good_stack));
+
 	user_addr = vm_mmap(NULL, 0, PAGE_SIZE,
 			    PROT_READ | PROT_WRITE | PROT_EXEC,
 			    MAP_ANONYMOUS | MAP_PRIVATE, 0);
-- 
2.35.1

[PATCH 5.15 169/247] drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit cc7ad0d77b51c872d629bcd98aea463a3c4109e7 ]

There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:

   (Thread 1)                  |      (Thread 2)
                               | _set_timer()
rtw_surveydone_event_callback()|  mod_timer()
 spin_lock_bh() //(1)          |  (wait a time)
 ...                           | rtw_scan_timeout_handler()
 del_timer_sync()              |  spin_lock_bh() //(2)
 (wait timer to stop)          |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409061836.60529-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index cf79bec916c5..2c20bf26b10e 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -749,7 +749,9 @@ void rtw_surveydone_event_callback(struct adapter	*adapter, u8 *pbuf)
 	}
 
 	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) {
+		spin_unlock_bh(&pmlmepriv->lock);
 		del_timer_sync(&pmlmepriv->scan_to_timer);
+		spin_lock_bh(&pmlmepriv->lock);
 		_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
 	}
 
@@ -1584,11 +1586,11 @@ void rtw_scan_timeout_handler(struct timer_list *t)
 						  mlmepriv.scan_to_timer);
 	struct	mlme_priv *pmlmepriv = &adapter->mlmepriv;
 
-	spin_lock_bh(&pmlmepriv->lock);
+	spin_lock_irq(&pmlmepriv->lock);
 
 	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
 
-	spin_unlock_bh(&pmlmepriv->lock);
+	spin_unlock_irq(&pmlmepriv->lock);
 
 	rtw_indicate_scan_done(adapter, true);
 }
-- 
2.35.1

[PATCH 5.15 170/247] drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 041879b12ddb0c6c83ed9c0bdd10dc82a056f2fc ]

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | _rtw_join_timeout_handler()
 del_timer_sync()            |  spin_lock_bh() //(2)
 (wait timer to stop)        |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index 2c20bf26b10e..952c3e14d1b3 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -1238,8 +1238,10 @@ void rtw_joinbss_event_prehandle(struct adapter *adapter, u8 *pbuf)
 
 			spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
+			spin_unlock_bh(&pmlmepriv->lock);
 			/* s5. Cancel assoc_timer */
 			del_timer_sync(&pmlmepriv->assoc_timer);
+			spin_lock_bh(&pmlmepriv->lock);
 		} else {
 			spin_unlock_bh(&(pmlmepriv->scanned_queue.lock));
 		}
@@ -1545,7 +1547,7 @@ void _rtw_join_timeout_handler(struct timer_list *t)
 	if (adapter->bDriverStopped || adapter->bSurpriseRemoved)
 		return;
 
-	spin_lock_bh(&pmlmepriv->lock);
+	spin_lock_irq(&pmlmepriv->lock);
 
 	if (rtw_to_roam(adapter) > 0) { /* join timeout caused by roaming */
 		while (1) {
@@ -1573,7 +1575,7 @@ void _rtw_join_timeout_handler(struct timer_list *t)
 
 	}
 
-	spin_unlock_bh(&pmlmepriv->lock);
+	spin_unlock_irq(&pmlmepriv->lock);
 }
 
 /*
-- 
2.35.1

[PATCH 5.15 171/247] tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ]

When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:

[   25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[   25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[   25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[   25.077709] Call Trace:
[   25.077924]  <TASK>
[   25.078108]  unregister_hdlc_device+0x16/0x30
[   25.078481]  slgt_cleanup+0x157/0x9f0 [synclink_gt]

Fix this by checking whether the 'info->netdev' is a null pointer first.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/synclink_gt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 25c558e65ece..9bc2a9265277 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1746,6 +1746,8 @@ static int hdlcdev_init(struct slgt_info *info)
  */
 static void hdlcdev_exit(struct slgt_info *info)
 {
+	if (!info->netdev)
+		return;
 	unregister_hdlc_device(info->netdev);
 	free_netdev(info->netdev);
 	info->netdev = NULL;
-- 
2.35.1

[PATCH 5.15 172/247] tty: Fix a possible resource leak in icom_probe

[Greg Kroah-Hartman]

From: Huang Guobin <huangguobin4@huawei.com>

[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ]

When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/icom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 03a2fe9f4c9a..02b375ba2f07 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1501,7 +1501,7 @@ static int icom_probe(struct pci_dev *dev,
 	retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
 	if (retval) {
 		dev_err(&dev->dev, "PCI Config read FAILED\n");
-		return retval;
+		goto probe_exit0;
 	}
 
 	pci_write_config_dword(dev, PCI_COMMAND,
-- 
2.35.1

[PATCH 5.15 173/247] thunderbolt: Use different lane for second DisplayPort tunnel

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 9d2d0a5cf0ca063f417681cc33e767ce52615286 ]

Brad reported that on Apple hardware with Light Ridge or Falcon Ridge
controller, plugging in a chain of Thunderbolt displays (Light Ridge
based controllers) causes all kinds of tearing and flickering. The
reason for this is that on Thunderbolt 1 hardware there is no lane
bonding so we have two independent 10 Gb/s lanes, and currently Linux
tunnels both displays through the lane 1. This makes the displays to
share the 10 Gb/s bandwidth which may not be enough for higher
resolutions.

For this reason make the second tunnel go through the lane 0 instead.
This seems to match what the macOS connection manager is also doing.

Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/tb.c     | 19 +++++++++++++++++--
 drivers/thunderbolt/test.c   | 16 ++++++++--------
 drivers/thunderbolt/tunnel.c | 11 ++++++-----
 drivers/thunderbolt/tunnel.h |  4 ++--
 4 files changed, 33 insertions(+), 17 deletions(-)

diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 2897a77d44c3..b805b6939794 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -851,7 +851,7 @@ static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in)
 
 static void tb_tunnel_dp(struct tb *tb)
 {
-	int available_up, available_down, ret;
+	int available_up, available_down, ret, link_nr;
 	struct tb_cm *tcm = tb_priv(tb);
 	struct tb_port *port, *in, *out;
 	struct tb_tunnel *tunnel;
@@ -896,6 +896,20 @@ static void tb_tunnel_dp(struct tb *tb)
 		return;
 	}
 
+	/*
+	 * This is only applicable to links that are not bonded (so
+	 * when Thunderbolt 1 hardware is involved somewhere in the
+	 * topology). For these try to share the DP bandwidth between
+	 * the two lanes.
+	 */
+	link_nr = 1;
+	list_for_each_entry(tunnel, &tcm->tunnel_list, list) {
+		if (tb_tunnel_is_dp(tunnel)) {
+			link_nr = 0;
+			break;
+		}
+	}
+
 	/*
 	 * DP stream needs the domain to be active so runtime resume
 	 * both ends of the tunnel.
@@ -927,7 +941,8 @@ static void tb_tunnel_dp(struct tb *tb)
 	tb_dbg(tb, "available bandwidth for new DP tunnel %u/%u Mb/s\n",
 	       available_up, available_down);
 
-	tunnel = tb_tunnel_alloc_dp(tb, in, out, available_up, available_down);
+	tunnel = tb_tunnel_alloc_dp(tb, in, out, link_nr, available_up,
+				    available_down);
 	if (!tunnel) {
 		tb_port_dbg(out, "could not allocate DP tunnel\n");
 		goto err_reclaim;
diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c
index 1f69bab236ee..66b6e665e96f 100644
--- a/drivers/thunderbolt/test.c
+++ b/drivers/thunderbolt/test.c
@@ -1348,7 +1348,7 @@ static void tb_test_tunnel_dp(struct kunit *test)
 	in = &host->ports[5];
 	out = &dev->ports[13];
 
-	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, tunnel != NULL);
 	KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP);
 	KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in);
@@ -1394,7 +1394,7 @@ static void tb_test_tunnel_dp_chain(struct kunit *test)
 	in = &host->ports[5];
 	out = &dev4->ports[14];
 
-	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, tunnel != NULL);
 	KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP);
 	KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in);
@@ -1444,7 +1444,7 @@ static void tb_test_tunnel_dp_tree(struct kunit *test)
 	in = &dev2->ports[13];
 	out = &dev5->ports[13];
 
-	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, tunnel != NULL);
 	KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP);
 	KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in);
@@ -1509,7 +1509,7 @@ static void tb_test_tunnel_dp_max_length(struct kunit *test)
 	in = &dev6->ports[13];
 	out = &dev12->ports[13];
 
-	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, tunnel != NULL);
 	KUNIT_EXPECT_EQ(test, tunnel->type, TB_TUNNEL_DP);
 	KUNIT_EXPECT_PTR_EQ(test, tunnel->src_port, in);
@@ -1627,7 +1627,7 @@ static void tb_test_tunnel_port_on_path(struct kunit *test)
 	in = &dev2->ports[13];
 	out = &dev5->ports[13];
 
-	dp_tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	dp_tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, dp_tunnel != NULL);
 
 	KUNIT_EXPECT_TRUE(test, tb_tunnel_port_on_path(dp_tunnel, in));
@@ -2009,7 +2009,7 @@ static void tb_test_credit_alloc_dp(struct kunit *test)
 	in = &host->ports[5];
 	out = &dev->ports[14];
 
-	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	tunnel = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, tunnel != NULL);
 	KUNIT_ASSERT_EQ(test, tunnel->npaths, (size_t)3);
 
@@ -2245,7 +2245,7 @@ static struct tb_tunnel *TB_TEST_DP_TUNNEL1(struct kunit *test,
 
 	in = &host->ports[5];
 	out = &dev->ports[13];
-	dp_tunnel1 = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	dp_tunnel1 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, dp_tunnel1 != NULL);
 	KUNIT_ASSERT_EQ(test, dp_tunnel1->npaths, (size_t)3);
 
@@ -2282,7 +2282,7 @@ static struct tb_tunnel *TB_TEST_DP_TUNNEL2(struct kunit *test,
 
 	in = &host->ports[6];
 	out = &dev->ports[14];
-	dp_tunnel2 = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
+	dp_tunnel2 = tb_tunnel_alloc_dp(NULL, in, out, 1, 0, 0);
 	KUNIT_ASSERT_TRUE(test, dp_tunnel2 != NULL);
 	KUNIT_ASSERT_EQ(test, dp_tunnel2->npaths, (size_t)3);
 
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index bb5cc480fc9a..bd98c719bf55 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -843,6 +843,7 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in)
  * @tb: Pointer to the domain structure
  * @in: DP in adapter port
  * @out: DP out adapter port
+ * @link_nr: Preferred lane adapter when the link is not bonded
  * @max_up: Maximum available upstream bandwidth for the DP tunnel (%0
  *	    if not limited)
  * @max_down: Maximum available downstream bandwidth for the DP tunnel
@@ -854,8 +855,8 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in)
  * Return: Returns a tb_tunnel on success or NULL on failure.
  */
 struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
-				     struct tb_port *out, int max_up,
-				     int max_down)
+				     struct tb_port *out, int link_nr,
+				     int max_up, int max_down)
 {
 	struct tb_tunnel *tunnel;
 	struct tb_path **paths;
@@ -879,21 +880,21 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
 	paths = tunnel->paths;
 
 	path = tb_path_alloc(tb, in, TB_DP_VIDEO_HOPID, out, TB_DP_VIDEO_HOPID,
-			     1, "Video");
+			     link_nr, "Video");
 	if (!path)
 		goto err_free;
 	tb_dp_init_video_path(path);
 	paths[TB_DP_VIDEO_PATH_OUT] = path;
 
 	path = tb_path_alloc(tb, in, TB_DP_AUX_TX_HOPID, out,
-			     TB_DP_AUX_TX_HOPID, 1, "AUX TX");
+			     TB_DP_AUX_TX_HOPID, link_nr, "AUX TX");
 	if (!path)
 		goto err_free;
 	tb_dp_init_aux_path(path);
 	paths[TB_DP_AUX_PATH_OUT] = path;
 
 	path = tb_path_alloc(tb, out, TB_DP_AUX_RX_HOPID, in,
-			     TB_DP_AUX_RX_HOPID, 1, "AUX RX");
+			     TB_DP_AUX_RX_HOPID, link_nr, "AUX RX");
 	if (!path)
 		goto err_free;
 	tb_dp_init_aux_path(path);
diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h
index eea14e24f7e0..a92027431697 100644
--- a/drivers/thunderbolt/tunnel.h
+++ b/drivers/thunderbolt/tunnel.h
@@ -69,8 +69,8 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up,
 				      struct tb_port *down);
 struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in);
 struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
-				     struct tb_port *out, int max_up,
-				     int max_down);
+				     struct tb_port *out, int link_nr,
+				     int max_up, int max_down);
 struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi,
 				      struct tb_port *dst, int transmit_path,
 				      int transmit_ring, int receive_path,
-- 
2.35.1

[PATCH 5.15 174/247] drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 806c7b53414934ba2a39449b31fd1a038e500273 ]

There is a deadlock in ieee80211_beacons_stop(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | ieee80211_send_beacon()
ieee80211_beacons_stop()   |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | ieee80211_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417135407.109536-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 1a193f900779..2b06706a7071 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -528,9 +528,9 @@ static void ieee80211_beacons_stop(struct ieee80211_device *ieee)
 	spin_lock_irqsave(&ieee->beacon_lock, flags);
 
 	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
 
 	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
+	del_timer_sync(&ieee->beacon_timer);
 }
 
 void ieee80211_stop_send_beacons(struct ieee80211_device *ieee)
-- 
2.35.1

[PATCH 5.15 175/247] drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 9b6bdbd9337de3917945847bde262a34a87a6303 ]

There is a deadlock in rtllib_beacons_stop(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | rtllib_send_beacon()
rtllib_beacons_stop()      |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | rtllib_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192e/rtllib_softmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index 503d33be71d9..ea8bc27fce49 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -651,9 +651,9 @@ static void rtllib_beacons_stop(struct rtllib_device *ieee)
 	spin_lock_irqsave(&ieee->beacon_lock, flags);
 
 	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
 
 	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
+	del_timer_sync(&ieee->beacon_timer);
 
 }
 
-- 
2.35.1

[PATCH 5.15 176/247] USB: host: isp116x: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Zhen Ni <nizhen@uniontech.com>

[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/isp116x-hcd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 8835f6bd528e..8c7f0991c21b 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1541,10 +1541,12 @@ static int isp116x_remove(struct platform_device *pdev)
 
 	iounmap(isp116x->data_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	release_mem_region(res->start, 2);
+	if (res)
+		release_mem_region(res->start, 2);
 	iounmap(isp116x->addr_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, 2);
+	if (res)
+		release_mem_region(res->start, 2);
 
 	usb_put_hcd(hcd);
 	return 0;
-- 
2.35.1

[PATCH 5.15 177/247] drivers: tty: serial: Fix deadlock in sa1100_set_termios()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]

There is a deadlock in sa1100_set_termios(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | sa1100_enable_ms()
sa1100_set_termios()       |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | sa1100_timeout()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.

This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sa1100.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 697b6a002a16..4ddcc985621a 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -446,6 +446,8 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
 
+	del_timer_sync(&sport->timer);
+
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
@@ -476,8 +478,6 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 				UTSR1_TO_SM(UTSR1_ROR);
 	}
 
-	del_timer_sync(&sport->timer);
-
 	/*
 	 * Update the per-port timeout.
 	 */
-- 
2.35.1

[PATCH 5.15 178/247] drivers: usb: host: Fix deadlock in oxu_bus_suspend()

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ]

There is a deadlock in oxu_bus_suspend(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | timer_action()
oxu_bus_suspend()          |  mod_timer()
 spin_lock_irq() //(1)     |  (wait a time)
 ...                       | oxu_watchdog()
 del_timer_sync()          |  spin_lock_irq() //(2)
 (wait timer to stop)      |  ...

We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/oxu210hp-hcd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4300326b3730..6be6c5878d08 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3909,8 +3909,10 @@ static int oxu_bus_suspend(struct usb_hcd *hcd)
 		}
 	}
 
+	spin_unlock_irq(&oxu->lock);
 	/* turn off now-idle HC */
 	del_timer_sync(&oxu->watchdog);
+	spin_lock_irq(&oxu->lock);
 	ehci_halt(oxu);
 	hcd->state = HC_STATE_SUSPENDED;
 
-- 
2.35.1

[PATCH 5.15 179/247] USB: hcd-pci: Fully suspend across freeze/thaw cycle

[Greg Kroah-Hartman]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ]

The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.

The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hcd-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d630cccd2e6e..5af810cd8a58 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -616,10 +616,10 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend_noirq	= hcd_pci_suspend_noirq,
 	.resume_noirq	= hcd_pci_resume_noirq,
 	.resume		= hcd_pci_resume,
-	.freeze		= check_root_hub_suspended,
+	.freeze		= hcd_pci_suspend,
 	.freeze_noirq	= check_root_hub_suspended,
 	.thaw_noirq	= NULL,
-	.thaw		= NULL,
+	.thaw		= hcd_pci_resume,
 	.poweroff	= hcd_pci_suspend,
 	.poweroff_noirq	= hcd_pci_suspend_noirq,
 	.restore_noirq	= hcd_pci_resume_noirq,
-- 
2.35.1

[PATCH 5.15 180/247] char: xillybus: fix a refcount leak in cleanup_dev()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit b67d19662fdee275c479d21853bc1239600a798f ]

usb_get_dev is called in xillyusb_probe. So it is better to call
usb_put_dev before xdev is released.

Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220406075703.23464-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/xillybus/xillyusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/xillybus/xillyusb.c b/drivers/char/xillybus/xillyusb.c
index dc3551796e5e..39bcbfd908b4 100644
--- a/drivers/char/xillybus/xillyusb.c
+++ b/drivers/char/xillybus/xillyusb.c
@@ -549,6 +549,7 @@ static void cleanup_dev(struct kref *kref)
 	if (xdev->workq)
 		destroy_workqueue(xdev->workq);
 
+	usb_put_dev(xdev->udev);
 	kfree(xdev->channels); /* Argument may be NULL, and that's fine */
 	kfree(xdev);
 }
-- 
2.35.1

[PATCH 5.15 181/247] sysrq: do not omit current cpu when showing backtrace of all active CPUs

[Greg Kroah-Hartman]

From: Changbin Du <changbin.du@gmail.com>

[ Upstream commit 5390e7f46b9d5546d45a83e6463bc656678b1d0e ]

The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a hint for idle CPU for
the generic workqueue based printing. (x86 already does this)

Now it looks like below:
[  279.401567] sysrq: Show backtrace of all active CPUs
[  279.407234] sysrq: CPU5:
[  279.407505] Call Trace:
[  279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[  279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[  279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[  279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[  279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[  279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[  279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[  279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[  279.417173] sysrq: CPU6: backtrace skipped as idling
[  279.417185] sysrq: CPU4: backtrace skipped as idling
[  279.417187] sysrq: CPU0: backtrace skipped as idling
[  279.417181] sysrq: CPU7: backtrace skipped as idling
[  279.417190] sysrq: CPU1: backtrace skipped as idling
[  279.417193] sysrq: CPU3: backtrace skipped as idling
[  279.417219] sysrq: CPU2:
[  279.419179] Call Trace:
[  279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[  279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[  279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[  279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[  279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[  279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[  279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[  279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Link: https://lore.kernel.org/r/20220117154300.2808-1-changbin.du@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/sysrq.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index c911196ac893..6b445ece8339 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -232,8 +232,10 @@ static void showacpu(void *dummy)
 	unsigned long flags;
 
 	/* Idle CPUs have no interesting backtrace. */
-	if (idle_cpu(smp_processor_id()))
+	if (idle_cpu(smp_processor_id())) {
+		pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
 		return;
+	}
 
 	raw_spin_lock_irqsave(&show_lock, flags);
 	pr_info("CPU%d:\n", smp_processor_id());
@@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key)
 
 		if (in_hardirq())
 			regs = get_irq_regs();
-		if (regs) {
-			pr_info("CPU%d:\n", smp_processor_id());
+
+		pr_info("CPU%d:\n", smp_processor_id());
+		if (regs)
 			show_regs(regs);
-		}
+		else
+			show_stack(NULL, NULL, KERN_INFO);
+
 		schedule_work(&sysrq_showallcpus);
 	}
 }
-- 
2.35.1

[PATCH 5.15 182/247] usb: dwc2: gadget: dont reset gadgets driver->bus

[Greg Kroah-Hartman]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ]

UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:

dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
 module_add_driver from bus_add_driver+0xf4/0x1e4
 bus_add_driver from driver_register+0x78/0x10c
 driver_register from usb_gadget_register_driver_owner+0x40/0xb4
 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
 do_one_initcall from do_init_module+0x44/0x1c8
 do_init_module from load_module+0x19b8/0x1b9c
 load_module from sys_finit_module+0xdc/0xfc
 sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---

Fix this by removing driver->bus entry reset.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 0909b088a284..e1cebf581a4a 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4544,7 +4544,6 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
 
 	WARN_ON(hsotg->driver);
 
-	driver->driver.bus = NULL;
 	hsotg->driver = driver;
 	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
-- 
2.35.1

[PATCH 5.15 183/247] soundwire: qcom: adjust autoenumeration timeout

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 74da272400b46f2e898f115d1b1cd60828766919 ]

Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.

Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 0ef79d60e88e..f5955826b152 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -97,7 +97,7 @@
 
 #define SWRM_SPECIAL_CMD_ID	0xF
 #define MAX_FREQ_NUM		1
-#define TIMEOUT_MS		(2 * HZ)
+#define TIMEOUT_MS		100
 #define QCOM_SWRM_MAX_RD_LEN	0x1
 #define QCOM_SDW_MAX_PORTS	14
 #define DEFAULT_CLK_FREQ	9600000
-- 
2.35.1

[PATCH 5.15 184/247] misc: rtsx: set NULL intfdata when probe fails

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ]

rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the
interface pointer when probe fails. This leaves a stale pointer.
Noticed the missing usb_set_intfdata() while debugging an unrelated
invalid DMA mapping problem.

Fix it with a call to usb_set_intfdata(..., NULL).

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220429210913.46804-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/cardreader/rtsx_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c
index 59eda55d92a3..1ef9b61077c4 100644
--- a/drivers/misc/cardreader/rtsx_usb.c
+++ b/drivers/misc/cardreader/rtsx_usb.c
@@ -667,6 +667,7 @@ static int rtsx_usb_probe(struct usb_interface *intf,
 	return 0;
 
 out_init_fail:
+	usb_set_intfdata(ucr->pusb_intf, NULL);
 	usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
 			ucr->iobuf_dma);
 	return ret;
-- 
2.35.1

[PATCH 5.15 185/247] extcon: Fix extcon_get_extcon_dev() error handling

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 58e4a2d27d3255e4e8c507fdc13734dccc9fc4c7 ]

The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled.  This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.

In real life, there are two things which prevented crashes.  First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.

The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled.  Then
the error handling is simple and just looks like:

	dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
	if (IS_ERR(dev->edev))
		return PTR_ERR(dev->edev);

For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully.  Those two drivers are
"typec_fusb302" and "max8997-battery".  In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op.  For the max8997-battery driver everything
should continue working as is.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-axp288.c         |  4 ++--
 drivers/extcon/extcon.c                |  4 +++-
 drivers/power/supply/axp288_charger.c  | 17 ++++++++++-------
 drivers/power/supply/charger-manager.c |  7 ++-----
 drivers/power/supply/max8997_charger.c |  8 ++++----
 drivers/usb/dwc3/drd.c                 |  9 ++-------
 drivers/usb/phy/phy-omap-otg.c         |  4 ++--
 drivers/usb/typec/tcpm/fusb302.c       |  4 ++--
 include/linux/extcon.h                 |  2 +-
 9 files changed, 28 insertions(+), 31 deletions(-)

diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index fdb31954cf2b..8073bc7d3e61 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -375,8 +375,8 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		if (adev) {
 			info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev));
 			put_device(&adev->dev);
-			if (!info->id_extcon)
-				return -EPROBE_DEFER;
+			if (IS_ERR(info->id_extcon))
+				return PTR_ERR(info->id_extcon);
 
 			dev_info(dev, "controlling USB role\n");
 		} else {
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index e7a9561a826d..9eb92997f3ae 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -863,6 +863,8 @@ EXPORT_SYMBOL_GPL(extcon_set_property_capability);
  * @extcon_name:	the extcon name provided with extcon_dev_register()
  *
  * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
+ * NOTE: This function returns -EPROBE_DEFER so it may only be called from
+ * probe() functions.
  */
 struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
@@ -876,7 +878,7 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 		if (!strcmp(sd->name, extcon_name))
 			goto out;
 	}
-	sd = NULL;
+	sd = ERR_PTR(-EPROBE_DEFER);
 out:
 	mutex_unlock(&extcon_dev_list_lock);
 	return sd;
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index fb9db7f43895..22378dad4d9f 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -832,17 +832,20 @@ static int axp288_charger_probe(struct platform_device *pdev)
 	info->regmap_irqc = axp20x->regmap_irqc;
 
 	info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
-	if (info->cable.edev == NULL) {
-		dev_dbg(dev, "%s is not ready, probe deferred\n",
-			AXP288_EXTCON_DEV_NAME);
-		return -EPROBE_DEFER;
+	if (IS_ERR(info->cable.edev)) {
+		dev_err_probe(dev, PTR_ERR(info->cable.edev),
+			      "extcon_get_extcon_dev(%s) failed\n",
+			      AXP288_EXTCON_DEV_NAME);
+		return PTR_ERR(info->cable.edev);
 	}
 
 	if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1)) {
 		info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_NAME);
-		if (info->otg.cable == NULL) {
-			dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n");
-			return -EPROBE_DEFER;
+		if (IS_ERR(info->otg.cable)) {
+			dev_err_probe(dev, PTR_ERR(info->otg.cable),
+				      "extcon_get_extcon_dev(%s) failed\n",
+				      USB_HOST_EXTCON_NAME);
+			return PTR_ERR(info->otg.cable);
 		}
 		dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
 	}
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index d67edb760c94..92db79400a6a 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -985,13 +985,10 @@ static int charger_extcon_init(struct charger_manager *cm,
 	cable->nb.notifier_call = charger_extcon_notifier;
 
 	cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
-	if (IS_ERR_OR_NULL(cable->extcon_dev)) {
+	if (IS_ERR(cable->extcon_dev)) {
 		pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
 			cable->extcon_name, cable->name);
-		if (cable->extcon_dev == NULL)
-			return -EPROBE_DEFER;
-		else
-			return PTR_ERR(cable->extcon_dev);
+		return PTR_ERR(cable->extcon_dev);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
index 25207fe2aa68..bfa7a576523d 100644
--- a/drivers/power/supply/max8997_charger.c
+++ b/drivers/power/supply/max8997_charger.c
@@ -248,10 +248,10 @@ static int max8997_battery_probe(struct platform_device *pdev)
 		dev_info(&pdev->dev, "couldn't get charger regulator\n");
 	}
 	charger->edev = extcon_get_extcon_dev("max8997-muic");
-	if (IS_ERR_OR_NULL(charger->edev)) {
-		if (!charger->edev)
-			return -EPROBE_DEFER;
-		dev_info(charger->dev, "couldn't get extcon device\n");
+	if (IS_ERR(charger->edev)) {
+		dev_err_probe(charger->dev, PTR_ERR(charger->edev),
+			      "couldn't get extcon device: max8997-muic\n");
+		return PTR_ERR(charger->edev);
 	}
 
 	if (!IS_ERR(charger->reg) && !IS_ERR_OR_NULL(charger->edev)) {
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index f148b0370f82..81ff21bd405a 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -454,13 +454,8 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	 * This device property is for kernel internal use only and
 	 * is expected to be set by the glue code.
 	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
 
 	/*
 	 * Try to get an extcon device from the USB PHY controller's "port"
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index ee0863c6553e..6e6ef8c0bc7e 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -95,8 +95,8 @@ static int omap_otg_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	extcon = extcon_get_extcon_dev(config->extcon);
-	if (!extcon)
-		return -EPROBE_DEFER;
+	if (IS_ERR(extcon))
+		return PTR_ERR(extcon);
 
 	otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
 	if (!otg_dev)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 72f9001b0792..96c55eaf3f80 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1708,8 +1708,8 @@ static int fusb302_probe(struct i2c_client *client,
 	 */
 	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
 		chip->extcon = extcon_get_extcon_dev(name);
-		if (!chip->extcon)
-			return -EPROBE_DEFER;
+		if (IS_ERR(chip->extcon))
+			return PTR_ERR(chip->extcon);
 	}
 
 	chip->vbus = devm_regulator_get(chip->dev, "vbus");
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 0c19010da77f..685401d94d39 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -296,7 +296,7 @@ static inline void devm_extcon_unregister_notifier_all(struct device *dev,
 
 static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
-	return ERR_PTR(-ENODEV);
+	return NULL;
 }
 
 static inline struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
-- 
2.35.1

[PATCH 5.15 186/247] extcon: Modify extcon device to be created after driver data is set

[Greg Kroah-Hartman]

From: bumwoo lee <bw365.lee@samsung.com>

[ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ]

Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.

- Oops's backtrace.

Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)

Signed-off-by: bumwoo lee <bw365.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 9eb92997f3ae..f305503ec27e 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1232,19 +1232,14 @@ int extcon_dev_register(struct extcon_dev *edev)
 		edev->dev.type = &edev->extcon_dev_type;
 	}
 
-	ret = device_register(&edev->dev);
-	if (ret) {
-		put_device(&edev->dev);
-		goto err_dev;
-	}
-
 	spin_lock_init(&edev->lock);
-	edev->nh = devm_kcalloc(&edev->dev, edev->max_supported,
-				sizeof(*edev->nh), GFP_KERNEL);
-	if (!edev->nh) {
-		ret = -ENOMEM;
-		device_unregister(&edev->dev);
-		goto err_dev;
+	if (edev->max_supported) {
+		edev->nh = kcalloc(edev->max_supported, sizeof(*edev->nh),
+				GFP_KERNEL);
+		if (!edev->nh) {
+			ret = -ENOMEM;
+			goto err_alloc_nh;
+		}
 	}
 
 	for (index = 0; index < edev->max_supported; index++)
@@ -1255,6 +1250,12 @@ int extcon_dev_register(struct extcon_dev *edev)
 	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
 
+	ret = device_register(&edev->dev);
+	if (ret) {
+		put_device(&edev->dev);
+		goto err_dev;
+	}
+
 	mutex_lock(&extcon_dev_list_lock);
 	list_add(&edev->entry, &extcon_dev_list);
 	mutex_unlock(&extcon_dev_list_lock);
@@ -1262,6 +1263,9 @@ int extcon_dev_register(struct extcon_dev *edev)
 	return 0;
 
 err_dev:
+	if (edev->max_supported)
+		kfree(edev->nh);
+err_alloc_nh:
 	if (edev->max_supported)
 		kfree(edev->extcon_dev_type.groups);
 err_alloc_groups:
@@ -1322,6 +1326,7 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 	if (edev->max_supported) {
 		kfree(edev->extcon_dev_type.groups);
 		kfree(edev->cables);
+		kfree(edev->nh);
 	}
 
 	put_device(&edev->dev);
-- 
2.35.1

[PATCH 5.15 187/247] clocksource/drivers/sp804: Avoid error on multiple instances

[Greg Kroah-Hartman]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring
up the first one, since multiple timers of the same kind are not useful
to Linux. As this is intentional behaviour, we should not return an
error message, as we do today:
===============
[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22
===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is
disabled (as this is now handled by OF_DECLARE), so remove the explicit
check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-sp804.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 401d592e85f5..e6a87f4af2b5 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -259,6 +259,11 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
 	struct clk *clk1, *clk2;
 	const char *name = of_get_property(np, "compatible", NULL);
 
+	if (initialized) {
+		pr_debug("%pOF: skipping further SP804 timer device\n", np);
+		return 0;
+	}
+
 	base = of_iomap(np, 0);
 	if (!base)
 		return -ENXIO;
@@ -270,11 +275,6 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
 	writel(0, timer1_base + timer->ctrl);
 	writel(0, timer2_base + timer->ctrl);
 
-	if (initialized || !of_device_is_available(np)) {
-		ret = -EINVAL;
-		goto err;
-	}
-
 	clk1 = of_clk_get(np, 0);
 	if (IS_ERR(clk1))
 		clk1 = NULL;
-- 
2.35.1

[PATCH 5.15 188/247] staging: rtl8712: fix uninit-value in usb_read8() and friends

[Greg Kroah-Hartman]

From: Wang Cheng <wanngchenng@gmail.com>

[ Upstream commit d1b57669732d09da7e13ef86d058dab0cd57f6e0 ]

When r8712_usbctrl_vendorreq() returns negative, 'data' in
usb_read{8,16,32} will not be initialized.

BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline]
BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725
 string_nocheck lib/vsprintf.c:643 [inline]
 string+0x4ec/0x6f0 lib/vsprintf.c:725
 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
 va_format lib/vsprintf.c:1704 [inline]
 pointer+0x18e6/0x1f70 lib/vsprintf.c:2443
 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810
 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604
 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615
 __dev_printk+0x3be/0x440 drivers/base/core.c:4627
 _dev_info+0x1ea/0x22f drivers/base/core.c:4673
 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5363 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
 port_event drivers/usb/core/hub.c:5665 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289
 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436
 kthread+0x3c7/0x500 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

Local variable data created at:
 usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33
 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Link: https://lore.kernel.org/r/b9b7a6ee02c02aa28054f5cf16129977775f3cd9.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8712/usb_ops.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/rtl8712/usb_ops.c b/drivers/staging/rtl8712/usb_ops.c
index e64845e6adf3..af9966d03979 100644
--- a/drivers/staging/rtl8712/usb_ops.c
+++ b/drivers/staging/rtl8712/usb_ops.c
@@ -29,7 +29,8 @@ static u8 usb_read8(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -37,8 +38,10 @@ static u8 usb_read8(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 1;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return (u8)(le32_to_cpu(data) & 0x0ff);
 }
 
@@ -49,7 +52,8 @@ static u16 usb_read16(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -57,8 +61,10 @@ static u16 usb_read16(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 2;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return (u16)(le32_to_cpu(data) & 0xffff);
 }
 
@@ -69,7 +75,8 @@ static u32 usb_read32(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -77,8 +84,10 @@ static u32 usb_read32(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 4;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return le32_to_cpu(data);
 }
 
-- 
2.35.1

[PATCH 5.15 189/247] staging: rtl8712: fix uninit-value in r871xu_drv_init()

[Greg Kroah-Hartman]

From: Wang Cheng <wanngchenng@gmail.com>

[ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ]

When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.

BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5358 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
 port_event drivers/usb/core/hub.c:5660 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
 kthread+0x3c7/0x500 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

Local variable mac created at:
 r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8712/usb_intf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index a61dd96ab2a4..6db2493e6d3a 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -536,13 +536,13 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 		} else {
 			AutoloadFail = false;
 		}
-		if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
+		if ((!AutoloadFail) ||
+		    ((mac[0] == 0xff) && (mac[1] == 0xff) &&
 		     (mac[2] == 0xff) && (mac[3] == 0xff) &&
 		     (mac[4] == 0xff) && (mac[5] == 0xff)) ||
 		    ((mac[0] == 0x00) && (mac[1] == 0x00) &&
 		     (mac[2] == 0x00) && (mac[3] == 0x00) &&
-		     (mac[4] == 0x00) && (mac[5] == 0x00)) ||
-		     (!AutoloadFail)) {
+		     (mac[4] == 0x00) && (mac[5] == 0x00))) {
 			mac[0] = 0x00;
 			mac[1] = 0xe0;
 			mac[2] = 0x4c;
-- 
2.35.1

[PATCH 5.15 190/247] serial: msm_serial: disable interrupts in __msm_console_write()

[Greg Kroah-Hartman]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/msm_serial.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 489d19274f9a..03ff63438e77 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1588,6 +1588,7 @@ static inline struct uart_port *msm_get_port_from_line(unsigned int line)
 static void __msm_console_write(struct uart_port *port, const char *s,
 				unsigned int count, bool is_uartdm)
 {
+	unsigned long flags;
 	int i;
 	int num_newlines = 0;
 	bool replaced = false;
@@ -1605,6 +1606,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 			num_newlines++;
 	count += num_newlines;
 
+	local_irq_save(flags);
+
 	if (port->sysrq)
 		locked = 0;
 	else if (oops_in_progress)
@@ -1650,6 +1653,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 
 	if (locked)
 		spin_unlock(&port->lock);
+
+	local_irq_restore(flags);
 }
 
 static void msm_console_write(struct console *co, const char *s,
-- 
2.35.1

[PATCH 5.15 191/247] kernfs: Separate kernfs_pr_cont_buf and rename_lock.

[Greg Kroah-Hartman]

From: Hao Luo <haoluo@google.com>

[ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ]

Previously the protection of kernfs_pr_cont_buf was piggy backed by
rename_lock, which means that pr_cont() needs to be protected under
rename_lock. This can cause potential circular lock dependencies.

If there is an OOM, we have the following call hierarchy:

 -> cpuset_print_current_mems_allowed()
   -> pr_cont_cgroup_name()
     -> pr_cont_kernfs_name()

pr_cont_kernfs_name() will grab rename_lock and call printk. So we have
the following lock dependencies:

 kernfs_rename_lock -> console_sem

Sometimes, printk does a wakeup before releasing console_sem, which has
the dependence chain:

 console_sem -> p->pi_lock -> rq->lock

Now, imagine one wants to read cgroup_name under rq->lock, for example,
printing cgroup_name in a tracepoint in the scheduler code. They will
be holding rq->lock and take rename_lock:

 rq->lock -> kernfs_rename_lock

Now they will deadlock.

A prevention to this circular lock dependency is to separate the
protection of pr_cont_buf from rename_lock. In principle, rename_lock
is to protect the integrity of cgroup name when copying to buf. Once
pr_cont_buf has got its content, rename_lock can be dropped. So it's
safe to drop rename_lock after kernfs_name_locked (and
kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock
to protect pr_cont_buf.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/kernfs/dir.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c
index 8e0a1378a4b1..7bf1d5fc2e9c 100644
--- a/fs/kernfs/dir.c
+++ b/fs/kernfs/dir.c
@@ -19,7 +19,15 @@
 
 DECLARE_RWSEM(kernfs_rwsem);
 static DEFINE_SPINLOCK(kernfs_rename_lock);	/* kn->parent and ->name */
-static char kernfs_pr_cont_buf[PATH_MAX];	/* protected by rename_lock */
+/*
+ * Don't use rename_lock to piggy back on pr_cont_buf. We don't want to
+ * call pr_cont() while holding rename_lock. Because sometimes pr_cont()
+ * will perform wakeups when releasing console_sem. Holding rename_lock
+ * will introduce deadlock if the scheduler reads the kernfs_name in the
+ * wakeup path.
+ */
+static DEFINE_SPINLOCK(kernfs_pr_cont_lock);
+static char kernfs_pr_cont_buf[PATH_MAX];	/* protected by pr_cont_lock */
 static DEFINE_SPINLOCK(kernfs_idr_lock);	/* root->ino_idr */
 
 #define rb_to_kn(X) rb_entry((X), struct kernfs_node, rb)
@@ -230,12 +238,12 @@ void pr_cont_kernfs_name(struct kernfs_node *kn)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&kernfs_rename_lock, flags);
+	spin_lock_irqsave(&kernfs_pr_cont_lock, flags);
 
-	kernfs_name_locked(kn, kernfs_pr_cont_buf, sizeof(kernfs_pr_cont_buf));
+	kernfs_name(kn, kernfs_pr_cont_buf, sizeof(kernfs_pr_cont_buf));
 	pr_cont("%s", kernfs_pr_cont_buf);
 
-	spin_unlock_irqrestore(&kernfs_rename_lock, flags);
+	spin_unlock_irqrestore(&kernfs_pr_cont_lock, flags);
 }
 
 /**
@@ -249,10 +257,10 @@ void pr_cont_kernfs_path(struct kernfs_node *kn)
 	unsigned long flags;
 	int sz;
 
-	spin_lock_irqsave(&kernfs_rename_lock, flags);
+	spin_lock_irqsave(&kernfs_pr_cont_lock, flags);
 
-	sz = kernfs_path_from_node_locked(kn, NULL, kernfs_pr_cont_buf,
-					  sizeof(kernfs_pr_cont_buf));
+	sz = kernfs_path_from_node(kn, NULL, kernfs_pr_cont_buf,
+				   sizeof(kernfs_pr_cont_buf));
 	if (sz < 0) {
 		pr_cont("(error)");
 		goto out;
@@ -266,7 +274,7 @@ void pr_cont_kernfs_path(struct kernfs_node *kn)
 	pr_cont("%s", kernfs_pr_cont_buf);
 
 out:
-	spin_unlock_irqrestore(&kernfs_rename_lock, flags);
+	spin_unlock_irqrestore(&kernfs_pr_cont_lock, flags);
 }
 
 /**
@@ -822,13 +830,12 @@ static struct kernfs_node *kernfs_walk_ns(struct kernfs_node *parent,
 
 	lockdep_assert_held_read(&kernfs_rwsem);
 
-	/* grab kernfs_rename_lock to piggy back on kernfs_pr_cont_buf */
-	spin_lock_irq(&kernfs_rename_lock);
+	spin_lock_irq(&kernfs_pr_cont_lock);
 
 	len = strlcpy(kernfs_pr_cont_buf, path, sizeof(kernfs_pr_cont_buf));
 
 	if (len >= sizeof(kernfs_pr_cont_buf)) {
-		spin_unlock_irq(&kernfs_rename_lock);
+		spin_unlock_irq(&kernfs_pr_cont_lock);
 		return NULL;
 	}
 
@@ -840,7 +847,7 @@ static struct kernfs_node *kernfs_walk_ns(struct kernfs_node *parent,
 		parent = kernfs_find_ns(parent, name, ns);
 	}
 
-	spin_unlock_irq(&kernfs_rename_lock);
+	spin_unlock_irq(&kernfs_pr_cont_lock);
 
 	return parent;
 }
-- 
2.35.1

[PATCH 5.15 192/247] watchdog: wdat_wdt: Stop watchdog when rebooting the system

[Greg Kroah-Hartman]

From: Liu Xinpeng <liuxp11@chinatelecom.cn>

[ Upstream commit 27fdf84510a1374748904db43f6755f912736d92 ]

Executing reboot command several times on the machine "Dell
PowerEdge R740", UEFI security detection stopped machine
with the following prompt:

UEFI0082: The system was reset due to a timeout from the watchdog
timer. Check the System Event Log (SEL) or crash dumps from
Operating Sysstem to identify the source that triggered the
watchdog timer reset. Update the firmware or driver for the
identified device.

iDRAC has warning event: "The watchdog timer reset the system".

This patch fixes this issue by adding the reboot notifier.

Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/wdat_wdt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c
index 195c8c004b69..4fac8148a8e6 100644
--- a/drivers/watchdog/wdat_wdt.c
+++ b/drivers/watchdog/wdat_wdt.c
@@ -462,6 +462,7 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		return ret;
 
 	watchdog_set_nowayout(&wdat->wdd, nowayout);
+	watchdog_stop_on_reboot(&wdat->wdd);
 	return devm_watchdog_register_device(dev, &wdat->wdd);
 }
 
-- 
2.35.1

[PATCH 5.15 193/247] md: protect md_unregister_thread from reentrancy

[Greg Kroah-Hartman]

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit 1e267742283a4b5a8ca65755c44166be27e9aa0f ]

Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.

Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.

Let's take pers_lock at the beginning of function to ensure reentrancy.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index b553654cbebc..bf1c5c0e472e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7942,17 +7942,22 @@ EXPORT_SYMBOL(md_register_thread);
 
 void md_unregister_thread(struct md_thread **threadp)
 {
-	struct md_thread *thread = *threadp;
-	if (!thread)
-		return;
-	pr_debug("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
-	/* Locking ensures that mddev_unlock does not wake_up a
+	struct md_thread *thread;
+
+	/*
+	 * Locking ensures that mddev_unlock does not wake_up a
 	 * non-existent thread
 	 */
 	spin_lock(&pers_lock);
+	thread = *threadp;
+	if (!thread) {
+		spin_unlock(&pers_lock);
+		return;
+	}
 	*threadp = NULL;
 	spin_unlock(&pers_lock);
 
+	pr_debug("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
 	kthread_stop(thread->tsk);
 	kfree(thread);
 }
-- 
2.35.1

[PATCH 5.15 194/247] scsi: myrb: Fix up null pointer access on myrb_cleanup()

[Greg Kroah-Hartman]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit f9f0a46141e2e39bedb4779c88380d1b5f018c14 ]

When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.

Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/myrb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index a4a88323e020..386256369dfc 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1239,7 +1239,8 @@ static void myrb_cleanup(struct myrb_hba *cb)
 	myrb_unmap(cb);
 
 	if (cb->mmio_base) {
-		cb->disable_intr(cb->io_base);
+		if (cb->disable_intr)
+			cb->disable_intr(cb->io_base);
 		iounmap(cb->mmio_base);
 	}
 	if (cb->irq)
@@ -3409,9 +3410,13 @@ static struct myrb_hba *myrb_detect(struct pci_dev *pdev,
 	mutex_init(&cb->dcmd_mutex);
 	mutex_init(&cb->dma_mutex);
 	cb->pdev = pdev;
+	cb->host = shost;
 
-	if (pci_enable_device(pdev))
-		goto failure;
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		scsi_host_put(shost);
+		return NULL;
+	}
 
 	if (privdata->hw_init == DAC960_PD_hw_init ||
 	    privdata->hw_init == DAC960_P_hw_init) {
-- 
2.35.1

[PATCH 5.15 195/247] Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"

[Greg Kroah-Hartman]

From: Michal Kubecek <mkubecek@suse.cz>

[ Upstream commit 9c90c9b3e50e16d03c7f87d63e9db373974781e0 ]

This reverts commit 4dc2a5a8f6754492180741facf2a8787f2c415d7.

A non-zero return value from pfkey_broadcast() does not necessarily mean
an error occurred as this function returns -ESRCH when no registered
listener received the message. In particular, a call with
BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return
zero so that this commit in fact prevents processing any PF_KEY message.
One visible effect is that racoon daemon fails to find encryption
algorithms like aes and refuses to start.

Excluding -ESRCH return value would fix this but it's not obvious that
we really want to bail out here and most other callers of
pfkey_broadcast() also ignore the return value. Also, as pointed out by
Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code
should use netlink instead so that we should only disturb the code for
really important fixes.

v2: add a comment explaining why is the return value ignored

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index 339d95df19d3..d93bde657359 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2826,10 +2826,12 @@ static int pfkey_process(struct sock *sk, struct sk_buff *skb, const struct sadb
 	void *ext_hdrs[SADB_EXT_MAX];
 	int err;
 
-	err = pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
-			      BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
-	if (err)
-		return err;
+	/* Non-zero return value of pfkey_broadcast() does not always signal
+	 * an error and even on an actual error we may still want to process
+	 * the message so rather ignore the return value.
+	 */
+	pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
+			BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
 
 	memset(ext_hdrs, 0, sizeof(ext_hdrs));
 	err = parse_exthdrs(skb, hdr, ext_hdrs);
-- 
2.35.1

[PATCH 5.15 196/247] ceph: allow ceph.dir.rctime xattr to be updatable

[Greg Kroah-Hartman]

From: Venky Shankar <vshankar@redhat.com>

[ Upstream commit d7a2dc523085f8b8c60548ceedc696934aefeb0e ]

`rctime' has been a pain point in cephfs due to its buggy
nature - inconsistent values reported and those sorts.
Fixing rctime is non-trivial needing an overall redesign
of the entire nested statistics infrastructure.

As a workaround, PR

     http://github.com/ceph/ceph/pull/37938

allows this extended attribute to be manually set. This allows
users to "fixup" inconsistent rctime values. While this sounds
messy, its probably the wisest approach allowing users/scripts
to workaround buggy rctime values.

The above PR enables Ceph MDS to allow manually setting
rctime extended attribute with the corresponding user-land
changes. We may as well allow the same to be done via kclient
for parity.

Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/xattr.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 159a1ffa4f4b..db288b4aee6d 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -366,6 +366,14 @@ static ssize_t ceph_vxattrcb_auth_mds(struct ceph_inode_info *ci,
 	}
 #define XATTR_RSTAT_FIELD(_type, _name)			\
 	XATTR_NAME_CEPH(_type, _name, VXATTR_FLAG_RSTAT)
+#define XATTR_RSTAT_FIELD_UPDATABLE(_type, _name)			\
+	{								\
+		.name = CEPH_XATTR_NAME(_type, _name),			\
+		.name_size = sizeof (CEPH_XATTR_NAME(_type, _name)),	\
+		.getxattr_cb = ceph_vxattrcb_ ## _type ## _ ## _name,	\
+		.exists_cb = NULL,					\
+		.flags = VXATTR_FLAG_RSTAT,				\
+	}
 #define XATTR_LAYOUT_FIELD(_type, _name, _field)			\
 	{								\
 		.name = CEPH_XATTR_NAME2(_type, _name, _field),	\
@@ -404,7 +412,7 @@ static struct ceph_vxattr ceph_dir_vxattrs[] = {
 	XATTR_RSTAT_FIELD(dir, rsubdirs),
 	XATTR_RSTAT_FIELD(dir, rsnaps),
 	XATTR_RSTAT_FIELD(dir, rbytes),
-	XATTR_RSTAT_FIELD(dir, rctime),
+	XATTR_RSTAT_FIELD_UPDATABLE(dir, rctime),
 	{
 		.name = "ceph.dir.pin",
 		.name_size = sizeof("ceph.dir.pin"),
-- 
2.35.1

[PATCH 5.15 197/247] ceph: flush the mdlog for filesystem sync

[Greg Kroah-Hartman]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit 1b2ba3c5616e17ff951359e25c658a1c3f146f1e ]

Before waiting for a request's safe reply, we will send the mdlog flush
request to the relevant MDS. And this will also flush the mdlog for all
the other unsafe requests in the same session, so we can record the last
session and no need to flush mdlog again in the next loop. But there
still have cases that it may send the mdlog flush requst twice or more,
but that should be not often.

Rename wait_unsafe_requests() to
flush_mdlog_and_wait_mdsc_unsafe_requests() to make it more
descriptive.

[xiubli: fold in MDS request refcount leak fix from Jeff]

URL: https://tracker.ceph.com/issues/55284
URL: https://tracker.ceph.com/issues/55411
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/mds_client.c | 33 +++++++++++++++++++++++++++------
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index e9409c460acd..912903de4de4 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -4794,15 +4794,17 @@ void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
 }
 
 /*
- * wait for all write mds requests to flush.
+ * flush the mdlog and wait for all write mds requests to flush.
  */
-static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
+static void flush_mdlog_and_wait_mdsc_unsafe_requests(struct ceph_mds_client *mdsc,
+						 u64 want_tid)
 {
 	struct ceph_mds_request *req = NULL, *nextreq;
+	struct ceph_mds_session *last_session = NULL;
 	struct rb_node *n;
 
 	mutex_lock(&mdsc->mutex);
-	dout("wait_unsafe_requests want %lld\n", want_tid);
+	dout("%s want %lld\n", __func__, want_tid);
 restart:
 	req = __get_oldest_req(mdsc);
 	while (req && req->r_tid <= want_tid) {
@@ -4814,14 +4816,32 @@ static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
 			nextreq = NULL;
 		if (req->r_op != CEPH_MDS_OP_SETFILELOCK &&
 		    (req->r_op & CEPH_MDS_OP_WRITE)) {
+			struct ceph_mds_session *s = req->r_session;
+
+			if (!s) {
+				req = nextreq;
+				continue;
+			}
+
 			/* write op */
 			ceph_mdsc_get_request(req);
 			if (nextreq)
 				ceph_mdsc_get_request(nextreq);
+			s = ceph_get_mds_session(s);
 			mutex_unlock(&mdsc->mutex);
-			dout("wait_unsafe_requests  wait on %llu (want %llu)\n",
+
+			/* send flush mdlog request to MDS */
+			if (last_session != s) {
+				send_flush_mdlog(s);
+				ceph_put_mds_session(last_session);
+				last_session = s;
+			} else {
+				ceph_put_mds_session(s);
+			}
+			dout("%s wait on %llu (want %llu)\n", __func__,
 			     req->r_tid, want_tid);
 			wait_for_completion(&req->r_safe_completion);
+
 			mutex_lock(&mdsc->mutex);
 			ceph_mdsc_put_request(req);
 			if (!nextreq)
@@ -4836,7 +4856,8 @@ static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
 		req = nextreq;
 	}
 	mutex_unlock(&mdsc->mutex);
-	dout("wait_unsafe_requests done\n");
+	ceph_put_mds_session(last_session);
+	dout("%s done\n", __func__);
 }
 
 void ceph_mdsc_sync(struct ceph_mds_client *mdsc)
@@ -4865,7 +4886,7 @@ void ceph_mdsc_sync(struct ceph_mds_client *mdsc)
 	dout("sync want tid %lld flush_seq %lld\n",
 	     want_tid, want_flush);
 
-	wait_unsafe_requests(mdsc, want_tid);
+	flush_mdlog_and_wait_mdsc_unsafe_requests(mdsc, want_tid);
 	wait_caps_flush(mdsc, want_flush);
 }
 
-- 
2.35.1

[PATCH 5.15 198/247] drm/amd/display: Check if modulo is 0 before dividing.

[Greg Kroah-Hartman]

From: David Galiffi <David.Galiffi@amd.com>

[ Upstream commit 49947b906a6bd9668eaf4f9cf691973c25c26955 ]

[How & Why]
If a value of 0 is read, then this will cause a divide-by-0 panic.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
index 2c7eb982eabc..054823d12403 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
@@ -1013,9 +1013,12 @@ static bool get_pixel_clk_frequency_100hz(
 			 * not be programmed equal to DPREFCLK
 			 */
 			modulo_hz = REG_READ(MODULO[inst]);
-			*pixel_clk_khz = div_u64((uint64_t)clock_hz*
-				clock_source->ctx->dc->clk_mgr->dprefclk_khz*10,
-				modulo_hz);
+			if (modulo_hz)
+				*pixel_clk_khz = div_u64((uint64_t)clock_hz*
+					clock_source->ctx->dc->clk_mgr->dprefclk_khz*10,
+					modulo_hz);
+			else
+				*pixel_clk_khz = 0;
 		} else {
 			/* NOTE: There is agreement with VBIOS here that MODULO is
 			 * programmed equal to DPREFCLK, in which case PHASE will be
-- 
2.35.1

[PATCH 5.15 199/247] drm/radeon: fix a possible null pointer dereference

[Greg Kroah-Hartman]

From: Gong Yuanjun <ruc_gongyuanjun@163.com>

[ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ]

In radeon_fp_native_mode(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.

The failure status of drm_cvt_mode() on the other path is checked too.

Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 1546abcadacf..d157bb9072e8 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -473,6 +473,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 	    native_mode->vdisplay != 0 &&
 	    native_mode->clock != 0) {
 		mode = drm_mode_duplicate(dev, native_mode);
+		if (!mode)
+			return NULL;
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		drm_mode_set_name(mode);
 
@@ -487,6 +489,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 		 * simpler.
 		 */
 		mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+		if (!mode)
+			return NULL;
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
 	}
-- 
2.35.1

[PATCH 5.15 200/247] drm/amd/pm: Fix missing thermal throttler status

[Greg Kroah-Hartman]

From: Lijo Lazar <lijo.lazar@amd.com>

[ Upstream commit b0f4d663fce6a4232d3c20ce820f919111b1c60b ]

On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index c9cfeb094750..d0c6b864d00a 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1627,6 +1627,7 @@ static const struct throttling_logging_label {
 	uint32_t feature_mask;
 	const char *label;
 } logging_label[] = {
+	{(1U << THROTTLER_TEMP_GPU_BIT), "GPU"},
 	{(1U << THROTTLER_TEMP_MEM_BIT), "HBM"},
 	{(1U << THROTTLER_TEMP_VR_GFX_BIT), "VR of GFX rail"},
 	{(1U << THROTTLER_TEMP_VR_MEM_BIT), "VR of HBM rail"},
-- 
2.35.1

[PATCH 5.15 201/247] um: line: Use separate IRQs per line

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d5a9597d6916a76663085db984cb8fe97f0a5c56 ]

Today, all possible serial lines (ssl*=) as well as all
possible consoles (con*=) each share a single interrupt
(with a fixed number) with others of the same type.

Now, if you have two lines, say ssl0 and ssl1, and one
of them is connected to an fd you cannot read (e.g. a
file), but the other gets a read interrupt, then both
of them get the interrupt since it's shared. Then, the
read() call will return EOF, since it's a file being
written and there's nothing to read (at least not at
the current offset, at the end).

Unfortunately, this is treated as a read error, and we
close this line, losing all the possible output.

It might be possible to work around this and make the
IRQ sharing work, however, now that we have dynamically
allocated IRQs that are easy to use, simply use that to
achieve separating between the events; then there's no
interrupt for that line and we never attempt the read
in the first place, thus not closing the line.

This manifested itself in the wifi hostap/hwsim tests
where the parallel script communicates via one serial
console and the kernel messages go to another (a file)
and sending data on the communication console caused
the kernel messages to stop flowing into the file.

Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/drivers/chan_kern.c     | 10 +++++-----
 arch/um/drivers/line.c          | 22 +++++++++++++---------
 arch/um/drivers/line.h          |  4 ++--
 arch/um/drivers/ssl.c           |  2 --
 arch/um/drivers/stdio_console.c |  2 --
 arch/um/include/asm/irq.h       | 22 +++++++++-------------
 6 files changed, 29 insertions(+), 33 deletions(-)

diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 62997055c454..26a702a06515 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -133,7 +133,7 @@ static void line_timer_cb(struct work_struct *work)
 	struct line *line = container_of(work, struct line, task.work);
 
 	if (!line->throttled)
-		chan_interrupt(line, line->driver->read_irq);
+		chan_interrupt(line, line->read_irq);
 }
 
 int enable_chan(struct line *line)
@@ -195,9 +195,9 @@ void free_irqs(void)
 		chan = list_entry(ele, struct chan, free_list);
 
 		if (chan->input && chan->enabled)
-			um_free_irq(chan->line->driver->read_irq, chan);
+			um_free_irq(chan->line->read_irq, chan);
 		if (chan->output && chan->enabled)
-			um_free_irq(chan->line->driver->write_irq, chan);
+			um_free_irq(chan->line->write_irq, chan);
 		chan->enabled = 0;
 	}
 }
@@ -215,9 +215,9 @@ static void close_one_chan(struct chan *chan, int delay_free_irq)
 		spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 	} else {
 		if (chan->input && chan->enabled)
-			um_free_irq(chan->line->driver->read_irq, chan);
+			um_free_irq(chan->line->read_irq, chan);
 		if (chan->output && chan->enabled)
-			um_free_irq(chan->line->driver->write_irq, chan);
+			um_free_irq(chan->line->write_irq, chan);
 		chan->enabled = 0;
 	}
 	if (chan->ops->close != NULL)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 8febf95da96e..02b0befd6763 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -139,7 +139,7 @@ static int flush_buffer(struct line *line)
 		count = line->buffer + LINE_BUFSIZE - line->head;
 
 		n = write_chan(line->chan_out, line->head, count,
-			       line->driver->write_irq);
+			       line->write_irq);
 		if (n < 0)
 			return n;
 		if (n == count) {
@@ -156,7 +156,7 @@ static int flush_buffer(struct line *line)
 
 	count = line->tail - line->head;
 	n = write_chan(line->chan_out, line->head, count,
-		       line->driver->write_irq);
+		       line->write_irq);
 
 	if (n < 0)
 		return n;
@@ -195,7 +195,7 @@ int line_write(struct tty_struct *tty, const unsigned char *buf, int len)
 		ret = buffer_data(line, buf, len);
 	else {
 		n = write_chan(line->chan_out, buf, len,
-			       line->driver->write_irq);
+			       line->write_irq);
 		if (n < 0) {
 			ret = n;
 			goto out_up;
@@ -215,7 +215,7 @@ void line_throttle(struct tty_struct *tty)
 {
 	struct line *line = tty->driver_data;
 
-	deactivate_chan(line->chan_in, line->driver->read_irq);
+	deactivate_chan(line->chan_in, line->read_irq);
 	line->throttled = 1;
 }
 
@@ -224,7 +224,7 @@ void line_unthrottle(struct tty_struct *tty)
 	struct line *line = tty->driver_data;
 
 	line->throttled = 0;
-	chan_interrupt(line, line->driver->read_irq);
+	chan_interrupt(line, line->read_irq);
 }
 
 static irqreturn_t line_write_interrupt(int irq, void *data)
@@ -260,19 +260,23 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
 	int err;
 
 	if (input) {
-		err = um_request_irq(driver->read_irq, fd, IRQ_READ,
-				     line_interrupt, IRQF_SHARED,
+		err = um_request_irq(UM_IRQ_ALLOC, fd, IRQ_READ,
+				     line_interrupt, 0,
 				     driver->read_irq_name, data);
 		if (err < 0)
 			return err;
+
+		line->read_irq = err;
 	}
 
 	if (output) {
-		err = um_request_irq(driver->write_irq, fd, IRQ_WRITE,
-				     line_write_interrupt, IRQF_SHARED,
+		err = um_request_irq(UM_IRQ_ALLOC, fd, IRQ_WRITE,
+				     line_write_interrupt, 0,
 				     driver->write_irq_name, data);
 		if (err < 0)
 			return err;
+
+		line->write_irq = err;
 	}
 
 	return 0;
diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h
index bdb16b96e76f..f15be75a3bf3 100644
--- a/arch/um/drivers/line.h
+++ b/arch/um/drivers/line.h
@@ -23,9 +23,7 @@ struct line_driver {
 	const short minor_start;
 	const short type;
 	const short subtype;
-	const int read_irq;
 	const char *read_irq_name;
-	const int write_irq;
 	const char *write_irq_name;
 	struct mc_device mc;
 	struct tty_driver *driver;
@@ -35,6 +33,8 @@ struct line {
 	struct tty_port port;
 	int valid;
 
+	int read_irq, write_irq;
+
 	char *init_str;
 	struct list_head chan_list;
 	struct chan *chan_in, *chan_out;
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index 41eae2e8fb65..8514966778d5 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -47,9 +47,7 @@ static struct line_driver driver = {
 	.minor_start 		= 64,
 	.type 		 	= TTY_DRIVER_TYPE_SERIAL,
 	.subtype 	 	= 0,
-	.read_irq 		= SSL_IRQ,
 	.read_irq_name 		= "ssl",
-	.write_irq 		= SSL_WRITE_IRQ,
 	.write_irq_name 	= "ssl-write",
 	.mc  = {
 		.list		= LIST_HEAD_INIT(driver.mc.list),
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index e8b762f4d8c2..489d5a746ed3 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -53,9 +53,7 @@ static struct line_driver driver = {
 	.minor_start 		= 0,
 	.type 		 	= TTY_DRIVER_TYPE_CONSOLE,
 	.subtype 	 	= SYSTEM_TYPE_CONSOLE,
-	.read_irq 		= CONSOLE_IRQ,
 	.read_irq_name 		= "console",
-	.write_irq 		= CONSOLE_WRITE_IRQ,
 	.write_irq_name 	= "console-write",
 	.mc  = {
 		.list		= LIST_HEAD_INIT(driver.mc.list),
diff --git a/arch/um/include/asm/irq.h b/arch/um/include/asm/irq.h
index e187c789369d..749dfe8512e8 100644
--- a/arch/um/include/asm/irq.h
+++ b/arch/um/include/asm/irq.h
@@ -4,19 +4,15 @@
 
 #define TIMER_IRQ		0
 #define UMN_IRQ			1
-#define CONSOLE_IRQ		2
-#define CONSOLE_WRITE_IRQ	3
-#define UBD_IRQ			4
-#define UM_ETH_IRQ		5
-#define SSL_IRQ			6
-#define SSL_WRITE_IRQ		7
-#define ACCEPT_IRQ		8
-#define MCONSOLE_IRQ		9
-#define WINCH_IRQ		10
-#define SIGIO_WRITE_IRQ 	11
-#define TELNETD_IRQ 		12
-#define XTERM_IRQ 		13
-#define RANDOM_IRQ 		14
+#define UBD_IRQ			2
+#define UM_ETH_IRQ		3
+#define ACCEPT_IRQ		4
+#define MCONSOLE_IRQ		5
+#define WINCH_IRQ		6
+#define SIGIO_WRITE_IRQ 	7
+#define TELNETD_IRQ 		8
+#define XTERM_IRQ 		9
+#define RANDOM_IRQ 		10
 
 #ifdef CONFIG_UML_NET_VECTOR
 
-- 
2.35.1

[PATCH 5.15 202/247] modpost: fix undefined behavior of is_arm_mapping_symbol()

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ]

The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.

strchr(3) says:
  The strchr() and strrchr() functions return a pointer to the matched
  character or NULL if the character is not found. The terminating null
  byte is considered part of the string, so that if c is specified as
  '\0', these functions return a pointer to the terminator.

When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).

Test code
---------

  char str1[] = "abc";
  char str2[] = "ab";

  strcpy(str1, "$");
  strcpy(str2, "$");

  printf("test1: %d\n", is_arm_mapping_symbol(str1));
  printf("test2: %d\n", is_arm_mapping_symbol(str2));

Result
------

  test1: 0
  test2: 1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mod/modpost.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 7a5bddb8913e..94041ee32798 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1260,7 +1260,8 @@ static int secref_whitelist(const struct sectioncheck *mismatch,
 
 static inline int is_arm_mapping_symbol(const char *str)
 {
-	return str[0] == '$' && strchr("axtd", str[1])
+	return str[0] == '$' &&
+	       (str[1] == 'a' || str[1] == 'd' || str[1] == 't' || str[1] == 'x')
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
-- 
2.35.1

[PATCH 5.15 203/247] x86/cpu: Elide KCSAN for cpu_has() and friends

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit a6a5eb269f6f3a2fe392f725a8d9052190c731e2 ]

As x86 uses the <asm-generic/bitops/instrumented-*.h> headers, the
regular forms of all bitops are instrumented with explicit calls to
KASAN and KCSAN checks. As these are explicit calls, these are not
suppressed by the noinstr function attribute.

This can result in calls to those check functions in noinstr code, which
objtool warns about:

vmlinux.o: warning: objtool: enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x28: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x24: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section

Prevent this by using the arch_*() bitops, which are the underlying
bitops without explciit instrumentation.

[null: Changelog]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220502111216.290518605@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/cpufeature.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 16a51e7288d5..b0f206681fde 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -51,7 +51,7 @@ extern const char * const x86_power_flags[32];
 extern const char * const x86_bug_flags[NBUGINTS*32];
 
 #define test_cpu_cap(c, bit)						\
-	 test_bit(bit, (unsigned long *)((c)->x86_capability))
+	 arch_test_bit(bit, (unsigned long *)((c)->x86_capability))
 
 /*
  * There are 32 bits/features in each mask word.  The high bits
-- 
2.35.1

[PATCH 5.15 204/247] jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 656d054e0a15ec327bd82801ccd58201e59f6896 ]

When building x86_64 with JUMP_LABEL=n it's possible for
instrumentation to sneak into noinstr:

vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section

Switch to arch_ prefixed atomic to avoid the explicit instrumentation.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/jump_label.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index 48b9b2a82767..019e55c13248 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -261,9 +261,9 @@ extern void static_key_disable_cpuslocked(struct static_key *key);
 #include <linux/atomic.h>
 #include <linux/bug.h>
 
-static inline int static_key_count(struct static_key *key)
+static __always_inline int static_key_count(struct static_key *key)
 {
-	return atomic_read(&key->enabled);
+	return arch_atomic_read(&key->enabled);
 }
 
 static __always_inline void jump_label_init(void)
-- 
2.35.1

[PATCH 5.15 205/247] nbd: call genl_unregister_family() first in nbd_cleanup()

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ]

Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000098
  Oops: 0002 [#1] SMP PTI
  CPU: 1 PID: 31299 Comm: nbd-client Tainted: G            E     5.14.0-rc4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:down_write+0x1a/0x50
  Call Trace:
   start_creating+0x89/0x130
   debugfs_create_dir+0x1b/0x130
   nbd_start_device+0x13d/0x390 [nbd]
   nbd_genl_connect+0x42f/0x748 [nbd]
   genl_family_rcv_msg_doit.isra.0+0xec/0x150
   genl_rcv_msg+0xe5/0x1e0
   netlink_rcv_skb+0x55/0x100
   genl_rcv+0x29/0x40
   netlink_unicast+0x1a8/0x250
   netlink_sendmsg+0x21b/0x430
   ____sys_sendmsg+0x2a4/0x2d0
   ___sys_sendmsg+0x81/0xc0
   __sys_sendmsg+0x62/0xb0
   __x64_sys_sendmsg+0x1f/0x30
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: nbd(E-)

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 8704212482e5..4be8ae20d1da 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -2478,6 +2478,12 @@ static void __exit nbd_cleanup(void)
 	struct nbd_device *nbd;
 	LIST_HEAD(del_list);
 
+	/*
+	 * Unregister netlink interface prior to waiting
+	 * for the completion of netlink commands.
+	 */
+	genl_unregister_family(&nbd_genl_family);
+
 	nbd_dbg_close();
 
 	mutex_lock(&nbd_index_mutex);
@@ -2496,7 +2502,6 @@ static void __exit nbd_cleanup(void)
 	destroy_workqueue(nbd_del_wq);
 
 	idr_destroy(&nbd_index_idr);
-	genl_unregister_family(&nbd_genl_family);
 	unregister_blkdev(NBD_MAJOR, "nbd");
 }
 
-- 
2.35.1

[PATCH 5.15 206/247] nbd: fix race between nbd_alloc_config() and module removal

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ]

When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.

The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  Oops: 0000 [#1] SMP PTI
  CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: knbd16-recv recv_work [nbd]
  RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
  Call Trace:
   recv_work+0x3b/0xb0 [nbd]
   process_one_work+0x1ed/0x390
   worker_thread+0x4a/0x3d0
   kthread+0x12a/0x150
   ret_from_fork+0x22/0x30

Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).

Also adding a debug message to check the reference counter
of nbd_config during module removal.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 4be8ae20d1da..b31eb9c7f239 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1467,15 +1467,20 @@ static struct nbd_config *nbd_alloc_config(void)
 {
 	struct nbd_config *config;
 
+	if (!try_module_get(THIS_MODULE))
+		return ERR_PTR(-ENODEV);
+
 	config = kzalloc(sizeof(struct nbd_config), GFP_NOFS);
-	if (!config)
-		return NULL;
+	if (!config) {
+		module_put(THIS_MODULE);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	atomic_set(&config->recv_threads, 0);
 	init_waitqueue_head(&config->recv_wq);
 	init_waitqueue_head(&config->conn_wait);
 	config->blksize_bits = NBD_DEF_BLKSIZE_BITS;
 	atomic_set(&config->live_connections, 0);
-	try_module_get(THIS_MODULE);
 	return config;
 }
 
@@ -1502,12 +1507,13 @@ static int nbd_open(struct block_device *bdev, fmode_t mode)
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
-		config = nbd->config = nbd_alloc_config();
-		if (!config) {
-			ret = -ENOMEM;
+		config = nbd_alloc_config();
+		if (IS_ERR(config)) {
+			ret = PTR_ERR(config);
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
+		nbd->config = config;
 		refcount_set(&nbd->config_refs, 1);
 		refcount_inc(&nbd->refs);
 		mutex_unlock(&nbd->config_lock);
@@ -1914,13 +1920,14 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
 		nbd_put(nbd);
 		return -EINVAL;
 	}
-	config = nbd->config = nbd_alloc_config();
-	if (!nbd->config) {
+	config = nbd_alloc_config();
+	if (IS_ERR(config)) {
 		mutex_unlock(&nbd->config_lock);
 		nbd_put(nbd);
 		printk(KERN_ERR "nbd: couldn't allocate config\n");
-		return -ENOMEM;
+		return PTR_ERR(config);
 	}
+	nbd->config = config;
 	refcount_set(&nbd->config_refs, 1);
 	set_bit(NBD_RT_BOUND, &config->runtime_flags);
 
@@ -2493,6 +2500,9 @@ static void __exit nbd_cleanup(void)
 	while (!list_empty(&del_list)) {
 		nbd = list_first_entry(&del_list, struct nbd_device, list);
 		list_del_init(&nbd->list);
+		if (refcount_read(&nbd->config_refs))
+			printk(KERN_ERR "nbd: possibly leaking nbd_config (ref %d)\n",
+					refcount_read(&nbd->config_refs));
 		if (refcount_read(&nbd->refs) != 1)
 			printk(KERN_ERR "nbd: possibly leaking a device\n");
 		nbd_put(nbd);
-- 
2.35.1

[PATCH 5.15 207/247] nbd: fix io hung while disconnecting device

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]

In our tests, "qemu-nbd" triggers a io hung:

INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
      Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd        state:D stack:    0 pid:11445 ppid:     1 flags:0x00000000
Call Trace:
 <TASK>
 __schedule+0x480/0x1050
 ? _raw_spin_lock_irqsave+0x3e/0xb0
 schedule+0x9c/0x1b0
 blk_mq_freeze_queue_wait+0x9d/0xf0
 ? ipi_rseq+0x70/0x70
 blk_mq_freeze_queue+0x2b/0x40
 nbd_add_socket+0x6b/0x270 [nbd]
 nbd_ioctl+0x383/0x510 [nbd]
 blkdev_ioctl+0x18e/0x3e0
 __x64_sys_ioctl+0xac/0x120
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0

"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:

block nbd0: Send disconnect failed -32

Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.

Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index b31eb9c7f239..b391ca062add 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1368,7 +1368,7 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 static void nbd_clear_sock_ioctl(struct nbd_device *nbd,
 				 struct block_device *bdev)
 {
-	sock_shutdown(nbd);
+	nbd_clear_sock(nbd);
 	__invalidate_device(bdev, true);
 	nbd_bdev_reset(bdev);
 	if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF,
-- 
2.35.1

[PATCH 5.15 208/247] s390/gmap: voluntarily schedule during key setting

[Greg Kroah-Hartman]

From: Christian Borntraeger <borntraeger@linux.ibm.com>

[ Upstream commit 6d5946274df1fff539a7eece458a43be733d1db8 ]

With large and many guest with storage keys it is possible to create
large latencies or stalls during initial key setting:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu:   18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998
       (t=2100 jiffies g=155867385 q=20879)
Task dump for CPU 18:
CPU 1/KVM       R  running task        0 1030947 256019 0x06000004
Call Trace:
sched_show_task
rcu_dump_cpu_stacks
rcu_sched_clock_irq
update_process_times
tick_sched_handle
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
do_IRQ
ext_int_handler
ptep_zap_key

The mmap lock is held during the page walking but since this is a
semaphore scheduling is still possible. Same for the kvm srcu.
To minimize overhead do this on every segment table entry or large page.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-2-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/gmap.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index d63c0ccc5ccd..4ce3a2f01c91 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -2601,6 +2601,18 @@ static int __s390_enable_skey_pte(pte_t *pte, unsigned long addr,
 	return 0;
 }
 
+/*
+ * Give a chance to schedule after setting a key to 256 pages.
+ * We only hold the mm lock, which is a rwsem and the kvm srcu.
+ * Both can sleep.
+ */
+static int __s390_enable_skey_pmd(pmd_t *pmd, unsigned long addr,
+				  unsigned long next, struct mm_walk *walk)
+{
+	cond_resched();
+	return 0;
+}
+
 static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
 				      unsigned long hmask, unsigned long next,
 				      struct mm_walk *walk)
@@ -2623,12 +2635,14 @@ static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
 	end = start + HPAGE_SIZE - 1;
 	__storage_key_init_range(start, end);
 	set_bit(PG_arch_1, &page->flags);
+	cond_resched();
 	return 0;
 }
 
 static const struct mm_walk_ops enable_skey_walk_ops = {
 	.hugetlb_entry		= __s390_enable_skey_hugetlb,
 	.pte_entry		= __s390_enable_skey_pte,
+	.pmd_entry		= __s390_enable_skey_pmd,
 };
 
 int s390_enable_skey(void)
-- 
2.35.1

[PATCH 5.15 209/247] cifs: version operations for smb20 unneeded when legacy support disabled

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 7ef93ffccd55fb0ba000ed16ef6a81cd7dee07b5 ]

We should not be including unused smb20 specific code when legacy
support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned
off).  For example smb2_operations and smb2_values aren't used
in that case.  Over time we can move more and more SMB1/CIFS and SMB2.0
code into the insecure legacy ifdefs

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsglob.h | 4 +++-
 fs/cifs/smb2ops.c  | 7 ++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b33835b2943e..a97ed30843cf 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1890,11 +1890,13 @@ extern mempool_t *cifs_mid_poolp;
 
 /* Operations for different SMB versions */
 #define SMB1_VERSION_STRING	"1.0"
+#define SMB20_VERSION_STRING    "2.0"
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 extern struct smb_version_operations smb1_operations;
 extern struct smb_version_values smb1_values;
-#define SMB20_VERSION_STRING	"2.0"
 extern struct smb_version_operations smb20_operations;
 extern struct smb_version_values smb20_values;
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 #define SMB21_VERSION_STRING	"2.1"
 extern struct smb_version_operations smb21_operations;
 extern struct smb_version_values smb21_values;
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 775296e4d3c8..735aafee63be 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -4271,11 +4271,13 @@ smb3_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,
 	}
 }
 
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 static bool
 smb2_is_read_op(__u32 oplock)
 {
 	return oplock == SMB2_OPLOCK_LEVEL_II;
 }
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 
 static bool
 smb21_is_read_op(__u32 oplock)
@@ -5371,7 +5373,7 @@ smb2_make_node(unsigned int xid, struct inode *inode,
 	return rc;
 }
 
-
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 struct smb_version_operations smb20_operations = {
 	.compare_fids = smb2_compare_fids,
 	.setup_request = smb2_setup_request,
@@ -5470,6 +5472,7 @@ struct smb_version_operations smb20_operations = {
 	.is_status_io_timeout = smb2_is_status_io_timeout,
 	.is_network_name_deleted = smb2_is_network_name_deleted,
 };
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 
 struct smb_version_operations smb21_operations = {
 	.compare_fids = smb2_compare_fids,
@@ -5801,6 +5804,7 @@ struct smb_version_operations smb311_operations = {
 	.is_network_name_deleted = smb2_is_network_name_deleted,
 };
 
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 struct smb_version_values smb20_values = {
 	.version_string = SMB20_VERSION_STRING,
 	.protocol_id = SMB20_PROT_ID,
@@ -5821,6 +5825,7 @@ struct smb_version_values smb20_values = {
 	.signing_required = SMB2_NEGOTIATE_SIGNING_REQUIRED,
 	.create_lease_size = sizeof(struct create_lease),
 };
+#endif /* ALLOW_INSECURE_LEGACY */
 
 struct smb_version_values smb21_values = {
 	.version_string = SMB21_VERSION_STRING,
-- 
2.35.1

[PATCH 5.15 210/247] drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate

[Greg Kroah-Hartman]

From: Yury Norov <yury.norov@gmail.com>

[ Upstream commit 525d6515604eb1373ce5e6372a6b6640953b2d6a ]

The smu_v1X_0_set_allowed_mask() uses bitmap_copy() to convert
bitmap to 32-bit array. This may be wrong due to endiannes issues.
Fix it by switching to bitmap_{from,to}_arr32.

CC: Alexander Gordeev <agordeev@linux.ibm.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Claudio Imbrenda <imbrenda@linux.ibm.com>
CC: David Hildenbrand <david@redhat.com>
CC: Heiko Carstens <hca@linux.ibm.com>
CC: Janosch Frank <frankja@linux.ibm.com>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
CC: Sven Schnelle <svens@linux.ibm.com>
CC: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c | 2 +-
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
index 87b055466a33..e6c93396434f 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
@@ -772,7 +772,7 @@ int smu_v11_0_set_allowed_mask(struct smu_context *smu)
 		goto failed;
 	}
 
-	bitmap_copy((unsigned long *)feature_mask, feature->allowed, 64);
+	bitmap_to_arr32(feature_mask, feature->allowed, 64);
 
 	ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetAllowedFeaturesMaskHigh,
 					  feature_mask[1], NULL);
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
index 8d4aa16b2ae7..6211570fb64f 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c
@@ -721,7 +721,7 @@ int smu_v13_0_set_allowed_mask(struct smu_context *smu)
 	if (bitmap_empty(feature->allowed, SMU_FEATURE_MAX) || feature->feature_num < 64)
 		goto failed;
 
-	bitmap_copy((unsigned long *)feature_mask, feature->allowed, 64);
+	bitmap_to_arr32(feature_mask, feature->allowed, 64);
 
 	ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetAllowedFeaturesMaskHigh,
 					      feature_mask[1], NULL);
-- 
2.35.1

[PATCH 5.15 211/247] nodemask: Fix return values to be unsigned

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ]

The nodemask routines had mixed return values that provided potentially
signed return values that could never happen. This was leading to the
compiler getting confusing about the range of possible return values
(it was thinking things could be negative where they could not be). Fix
all the nodemask routines that should be returning unsigned
(or bool) values. Silences:

 mm/swapfile.c: In function ‘setup_swap_info’:
 mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds]
  2291 |                                 p->avail_lists[i].prio = 1;
       |                                 ~~~~~~~~~~~~~~^~~
 In file included from mm/swapfile.c:16:
 ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’
   292 |         struct plist_node avail_lists[]; /*
       |                           ^~~~~~~~~~~

Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/nodemask.h | 38 +++++++++++++++++++-------------------
 lib/nodemask.c           |  4 ++--
 2 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index c6199dbe2591..0f233b76c9ce 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -42,11 +42,11 @@
  * void nodes_shift_right(dst, src, n)	Shift right
  * void nodes_shift_left(dst, src, n)	Shift left
  *
- * int first_node(mask)			Number lowest set bit, or MAX_NUMNODES
- * int next_node(node, mask)		Next node past 'node', or MAX_NUMNODES
- * int next_node_in(node, mask)		Next node past 'node', or wrap to first,
+ * unsigned int first_node(mask)	Number lowest set bit, or MAX_NUMNODES
+ * unsigend int next_node(node, mask)	Next node past 'node', or MAX_NUMNODES
+ * unsigned int next_node_in(node, mask) Next node past 'node', or wrap to first,
  *					or MAX_NUMNODES
- * int first_unset_node(mask)		First node not set in mask, or 
+ * unsigned int first_unset_node(mask)	First node not set in mask, or
  *					MAX_NUMNODES
  *
  * nodemask_t nodemask_of_node(node)	Return nodemask with bit 'node' set
@@ -153,7 +153,7 @@ static inline void __nodes_clear(nodemask_t *dstp, unsigned int nbits)
 
 #define node_test_and_set(node, nodemask) \
 			__node_test_and_set((node), &(nodemask))
-static inline int __node_test_and_set(int node, nodemask_t *addr)
+static inline bool __node_test_and_set(int node, nodemask_t *addr)
 {
 	return test_and_set_bit(node, addr->bits);
 }
@@ -200,7 +200,7 @@ static inline void __nodes_complement(nodemask_t *dstp,
 
 #define nodes_equal(src1, src2) \
 			__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_equal(const nodemask_t *src1p,
+static inline bool __nodes_equal(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_equal(src1p->bits, src2p->bits, nbits);
@@ -208,7 +208,7 @@ static inline int __nodes_equal(const nodemask_t *src1p,
 
 #define nodes_intersects(src1, src2) \
 			__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_intersects(const nodemask_t *src1p,
+static inline bool __nodes_intersects(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
@@ -216,20 +216,20 @@ static inline int __nodes_intersects(const nodemask_t *src1p,
 
 #define nodes_subset(src1, src2) \
 			__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_subset(const nodemask_t *src1p,
+static inline bool __nodes_subset(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_subset(src1p->bits, src2p->bits, nbits);
 }
 
 #define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
-static inline int __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
 {
 	return bitmap_empty(srcp->bits, nbits);
 }
 
 #define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
-static inline int __nodes_full(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_full(const nodemask_t *srcp, unsigned int nbits)
 {
 	return bitmap_full(srcp->bits, nbits);
 }
@@ -260,15 +260,15 @@ static inline void __nodes_shift_left(nodemask_t *dstp,
           > MAX_NUMNODES, then the silly min_ts could be dropped. */
 
 #define first_node(src) __first_node(&(src))
-static inline int __first_node(const nodemask_t *srcp)
+static inline unsigned int __first_node(const nodemask_t *srcp)
 {
-	return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
+	return min_t(unsigned int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
 }
 
 #define next_node(n, src) __next_node((n), &(src))
-static inline int __next_node(int n, const nodemask_t *srcp)
+static inline unsigned int __next_node(int n, const nodemask_t *srcp)
 {
-	return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
+	return min_t(unsigned int, MAX_NUMNODES, find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
 }
 
 /*
@@ -276,7 +276,7 @@ static inline int __next_node(int n, const nodemask_t *srcp)
  * the first node in src if needed.  Returns MAX_NUMNODES if src is empty.
  */
 #define next_node_in(n, src) __next_node_in((n), &(src))
-int __next_node_in(int node, const nodemask_t *srcp);
+unsigned int __next_node_in(int node, const nodemask_t *srcp);
 
 static inline void init_nodemask_of_node(nodemask_t *mask, int node)
 {
@@ -296,9 +296,9 @@ static inline void init_nodemask_of_node(nodemask_t *mask, int node)
 })
 
 #define first_unset_node(mask) __first_unset_node(&(mask))
-static inline int __first_unset_node(const nodemask_t *maskp)
+static inline unsigned int __first_unset_node(const nodemask_t *maskp)
 {
-	return min_t(int,MAX_NUMNODES,
+	return min_t(unsigned int, MAX_NUMNODES,
 			find_first_zero_bit(maskp->bits, MAX_NUMNODES));
 }
 
@@ -435,11 +435,11 @@ static inline int num_node_state(enum node_states state)
 
 #define first_online_node	first_node(node_states[N_ONLINE])
 #define first_memory_node	first_node(node_states[N_MEMORY])
-static inline int next_online_node(int nid)
+static inline unsigned int next_online_node(int nid)
 {
 	return next_node(nid, node_states[N_ONLINE]);
 }
-static inline int next_memory_node(int nid)
+static inline unsigned int next_memory_node(int nid)
 {
 	return next_node(nid, node_states[N_MEMORY]);
 }
diff --git a/lib/nodemask.c b/lib/nodemask.c
index 3aa454c54c0d..e22647f5181b 100644
--- a/lib/nodemask.c
+++ b/lib/nodemask.c
@@ -3,9 +3,9 @@
 #include <linux/module.h>
 #include <linux/random.h>
 
-int __next_node_in(int node, const nodemask_t *srcp)
+unsigned int __next_node_in(int node, const nodemask_t *srcp)
 {
-	int ret = __next_node(node, srcp);
+	unsigned int ret = __next_node(node, srcp);
 
 	if (ret == MAX_NUMNODES)
 		ret = __first_node(srcp);
-- 
2.35.1

[PATCH 5.15 212/247] vringh: Fix loop descriptors check in the indirect cases

[Greg Kroah-Hartman]

From: Xie Yongji <xieyongji@bytedance.com>

[ Upstream commit dbd29e0752286af74243cf891accf472b2f3edd8 ]

We should use size of descriptor chain to test loop condition
in the indirect case. And another statistical count is also introduced
for indirect descriptors to avoid conflict with the statistical count
of direct descriptors.

Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Fam Zheng <fam.zheng@bytedance.com>
Message-Id: <20220505100910.137-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vringh.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index 14e2043d7685..eab55accf381 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -292,7 +292,7 @@ __vringh_iov(struct vringh *vrh, u16 i,
 	     int (*copy)(const struct vringh *vrh,
 			 void *dst, const void *src, size_t len))
 {
-	int err, count = 0, up_next, desc_max;
+	int err, count = 0, indirect_count = 0, up_next, desc_max;
 	struct vring_desc desc, *descs;
 	struct vringh_range range = { -1ULL, 0 }, slowrange;
 	bool slow = false;
@@ -349,7 +349,12 @@ __vringh_iov(struct vringh *vrh, u16 i,
 			continue;
 		}
 
-		if (count++ == vrh->vring.num) {
+		if (up_next == -1)
+			count++;
+		else
+			indirect_count++;
+
+		if (count > vrh->vring.num || indirect_count > desc_max) {
 			vringh_bad("Descriptor loop in %p", descs);
 			err = -ELOOP;
 			goto fail;
@@ -411,6 +416,7 @@ __vringh_iov(struct vringh *vrh, u16 i,
 				i = return_from_indirect(vrh, &up_next,
 							 &descs, &desc_max);
 				slow = false;
+				indirect_count = 0;
 			} else
 				break;
 		}
-- 
2.35.1

[PATCH 5.15 213/247] scripts/gdb: change kernel config dumping method

[Greg Kroah-Hartman]

From: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>

[ Upstream commit 1f7a6cf6b07c74a17343c2559cd5f5018a245961 ]

MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.

Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.

Fixes: 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/gdb/linux/config.py | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/scripts/gdb/linux/config.py b/scripts/gdb/linux/config.py
index 90e1565b1967..8843ab3cbadd 100644
--- a/scripts/gdb/linux/config.py
+++ b/scripts/gdb/linux/config.py
@@ -24,9 +24,9 @@ class LxConfigDump(gdb.Command):
             filename = arg
 
         try:
-            py_config_ptr = gdb.parse_and_eval("kernel_config_data + 8")
-            py_config_size = gdb.parse_and_eval(
-                    "sizeof(kernel_config_data) - 1 - 8 * 2")
+            py_config_ptr = gdb.parse_and_eval("&kernel_config_data")
+            py_config_ptr_end = gdb.parse_and_eval("&kernel_config_data_end")
+            py_config_size = py_config_ptr_end - py_config_ptr
         except gdb.error as e:
             raise gdb.GdbError("Can't find config, enable CONFIG_IKCONFIG?")
 
-- 
2.35.1

[PATCH 5.15 214/247] ALSA: usb-audio: Skip generic sync EP parse for secondary EP

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit efb75df105e82f076a85b9f2d81410428bcb55fc upstream.

When ep_idx is already non-zero, it means usually a capture stream
that is set up explicity by a fixed-format quirk, and applying the
check for generic (non-implicit-fb) sync EPs might hit incorrectly,
resulting in a bogus sync endpoint for the capture stream.

This patch adds a check for the ep_idx and skip if it's a secondary
endpoint.  It's a part of the fixes for regressions on Saffire 6.

Fixes: 7b0efea4baf0 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index b470404a5376..b0369df53910 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -304,7 +304,7 @@ int snd_usb_audioformat_set_sync_ep(struct snd_usb_audio *chip,
 	 * Generic sync EP handling
 	 */
 
-	if (altsd->bNumEndpoints < 2)
+	if (fmt->ep_idx > 0 || altsd->bNumEndpoints < 2)
 		return 0;
 
 	is_playback = !(get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN);
-- 
2.36.1

[PATCH 5.15 215/247] ALSA: usb-audio: Set up (implicit) sync for Saffire 6

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit e0469d6581aecb0e34e2ec64f39f88e6985cc52f upstream.

Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting.  Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits.  In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.

This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
  we just need to fill the fields and let the generic parser skipping
  parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.

Fixes: 7b0efea4baf0 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c          | 3 +++
 sound/usb/quirks-table.h | 7 ++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index b0369df53910..e692ae04436a 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -291,6 +291,9 @@ int snd_usb_audioformat_set_sync_ep(struct snd_usb_audio *chip,
 	bool is_playback;
 	int err;
 
+	if (fmt->sync_ep)
+		return 0; /* already set up */
+
 	alts = snd_usb_get_host_interface(chip, fmt->iface, fmt->altsetting);
 	if (!alts)
 		return 0;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 78eb41b621d6..4f56e1784932 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2658,7 +2658,12 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.nr_rates = 2,
 					.rate_table = (unsigned int[]) {
 						44100, 48000
-					}
+					},
+					.sync_ep = 0x82,
+					.sync_iface = 0,
+					.sync_altsetting = 1,
+					.sync_ep_idx = 1,
+					.implicit_fb = 1,
 				}
 			},
 			{
-- 
2.36.1

[PATCH 5.15 216/247] ALSA: hda/conexant - Fix loopback issue with CX20632

[Greg Kroah-Hartman]

From: huangwenhui <huangwenhuia@uniontech.com>

commit d5ea7544c32ba27c2c5826248e4ff58bd50a2518 upstream.

On a machine with CX20632, Alsamixer doesn't have 'Loopback
Mixing' and 'Line'.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220607065631.10708-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1052,6 +1052,13 @@ static int patch_conexant_auto(struct hd
 		snd_hda_pick_fixup(codec, cxt5051_fixup_models,
 				   cxt5051_fixups, cxt_fixups);
 		break;
+	case 0x14f15098:
+		codec->pin_amp_workaround = 1;
+		spec->gen.mixer_nid = 0x22;
+		spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
+		snd_hda_pick_fixup(codec, cxt5066_fixup_models,
+				   cxt5066_fixups, cxt_fixups);
+		break;
 	case 0x14f150f2:
 		codec->power_save_node = 1;
 		fallthrough;

[PATCH 5.15 217/247] ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021

[Greg Kroah-Hartman]

From: Cameron Berkenpas <cam@neo-zeon.de>

commit 85743a847caeab696dafc4ce1a7e1e2b7e29a0f6 upstream.

Enables the ALC287_FIXUP_YOGA7_14ITL_SPEAKERS quirk for the Lenovo
Yoga DuetITL 2021 laptop to fix speaker output.

[ re-sorted in the SSID order by tiwai ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de>
Co-authored-by: Songine <donglingluoying@gmail.com>
Cc: stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606002329.215330-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9043,6 +9043,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x31af, "ThinkCentre Station", ALC623_FIXUP_LENOVO_THINKSTATION_P340),
+	SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo Yoga DuetITL 2021", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME),
 	SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS),

[PATCH 5.15 218/247] ALSA: hda/realtek: Add quirk for HP Dev One

[Greg Kroah-Hartman]

From: Jeremy Soller <jeremy@system76.com>

commit 5f3d696eea916693b2d4ed7e62794653fcdd6ec0 upstream.

Enables the audio mute LEDs and limits the mic boost to avoid picking up
noise.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220608140111.23170-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8847,6 +8847,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x88d0, "HP Pavilion 15-eh1xxx (mainboard 88D0)", ALC287_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x89c3, "HP", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x89ca, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+	SND_PCI_QUIRK(0x103c, 0x8a78, "HP Dev One", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
 	SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),

[PATCH 5.15 219/247] cifs: return errors during session setup during reconnects

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 8ea21823aa584b55ba4b861307093b78054b0c1b upstream.

During reconnects, we check the return value from
cifs_negotiate_protocol, and have handlers for both success
and failures. But if that passes, and cifs_setup_session
returns any errors other than -EACCES, we do not handle
that. This fix adds a handler for that, so that we don't
go ahead and try a tree_connect on a failed session.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2pdu.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -268,6 +268,9 @@ smb2_reconnect(__le16 smb2_command, stru
 			ses->binding_chan = NULL;
 			mutex_unlock(&tcon->ses->session_mutex);
 			goto failed;
+		} else if (rc) {
+			mutex_unlock(&ses->session_mutex);
+			goto out;
 		}
 	}
 	/*

[PATCH 5.15 220/247] cifs: fix reconnect on smb3 mount types

[Greg Kroah-Hartman]

From: Paulo Alcantara <pc@cjr.nz>

commit c36ee7dab7749f7be21f7a72392744490b2a9a2b upstream.

cifs.ko defines two file system types: cifs & smb3, and
__cifs_get_super() was not including smb3 file system type when
looking up superblocks, therefore failing to reconnect tcons in
cifs_tree_connect().

Fix this by calling iterate_supers_type() on both file system types.

Link: https://lore.kernel.org/r/CAFrh3J9soC36+BVuwHB=g9z_KB5Og2+p2_W+BBoBOZveErz14w@mail.gmail.com
Cc: stable@vger.kernel.org
Tested-by: Satadru Pramanik <satadru@gmail.com>
Reported-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifsfs.c |    2 +-
 fs/cifs/cifsfs.h |    2 +-
 fs/cifs/misc.c   |   27 ++++++++++++++++-----------
 3 files changed, 18 insertions(+), 13 deletions(-)

--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1074,7 +1074,7 @@ struct file_system_type cifs_fs_type = {
 };
 MODULE_ALIAS_FS("cifs");
 
-static struct file_system_type smb3_fs_type = {
+struct file_system_type smb3_fs_type = {
 	.owner = THIS_MODULE,
 	.name = "smb3",
 	.init_fs_context = smb3_init_fs_context,
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -38,7 +38,7 @@ static inline unsigned long cifs_get_tim
 	return (unsigned long) dentry->d_fsdata;
 }
 
-extern struct file_system_type cifs_fs_type;
+extern struct file_system_type cifs_fs_type, smb3_fs_type;
 extern const struct address_space_operations cifs_addr_ops;
 extern const struct address_space_operations cifs_addr_ops_smallbuf;
 
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -1212,18 +1212,23 @@ static struct super_block *__cifs_get_su
 		.data = data,
 		.sb = NULL,
 	};
+	struct file_system_type **fs_type = (struct file_system_type *[]) {
+		&cifs_fs_type, &smb3_fs_type, NULL,
+	};
 
-	iterate_supers_type(&cifs_fs_type, f, &sd);
-
-	if (!sd.sb)
-		return ERR_PTR(-EINVAL);
-	/*
-	 * Grab an active reference in order to prevent automounts (DFS links)
-	 * of expiring and then freeing up our cifs superblock pointer while
-	 * we're doing failover.
-	 */
-	cifs_sb_active(sd.sb);
-	return sd.sb;
+	for (; *fs_type; fs_type++) {
+		iterate_supers_type(*fs_type, f, &sd);
+		if (sd.sb) {
+			/*
+			 * Grab an active reference in order to prevent automounts (DFS links)
+			 * of expiring and then freeing up our cifs superblock pointer while
+			 * we're doing failover.
+			 */
+			cifs_sb_active(sd.sb);
+			return sd.sb;
+		}
+	}
+	return ERR_PTR(-EINVAL);
 }
 
 static void __cifs_put_super(struct super_block *sb)

[PATCH 5.15 221/247] KEYS: trusted: tpm2: Fix migratable logic

[Greg Kroah-Hartman]

From: David Safford <david.safford@gmail.com>

commit dda5384313a40ecbaafd8a9a80f47483255e4c4d upstream.

When creating (sealing) a new trusted key, migratable
trusted keys have the FIXED_TPM and FIXED_PARENT attributes
set, and non-migratable keys don't. This is backwards, and
also causes creation to fail when creating a migratable key
under a migratable parent. (The TPM thinks you are trying to
seal a non-migratable blob under a migratable parent.)

The following simple patch fixes the logic, and has been
tested for all four combinations of migratable and non-migratable
trusted keys and parent storage keys. With this logic, you will
get a proper failure if you try to create a non-migratable
trusted key under a migratable parent storage key, and all other
combinations work correctly.

Cc: stable@vger.kernel.org # v5.13+
Fixes: e5fb5d2c5a03 ("security: keys: trusted: Make sealed key properly interoperable")
Signed-off-by: David Safford <david.safford@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/keys/trusted-keys/trusted_tpm2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/security/keys/trusted-keys/trusted_tpm2.c
+++ b/security/keys/trusted-keys/trusted_tpm2.c
@@ -283,8 +283,8 @@ int tpm2_seal_trusted(struct tpm_chip *c
 	/* key properties */
 	flags = 0;
 	flags |= options->policydigest_len ? 0 : TPM2_OA_USER_WITH_AUTH;
-	flags |= payload->migratable ? (TPM2_OA_FIXED_TPM |
-					TPM2_OA_FIXED_PARENT) : 0;
+	flags |= payload->migratable ? 0 : (TPM2_OA_FIXED_TPM |
+					    TPM2_OA_FIXED_PARENT);
 	tpm_buf_append_u32(&buf, flags);
 
 	/* policy */

[PATCH 5.15 222/247] ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream.

The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.

To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0

Using the correct ata_bitfield_name_search() macro fixes that:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4

While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/ABI/testing/sysfs-ata |   11 ++++++-----
 drivers/ata/libata-transport.c      |    2 +-
 2 files changed, 7 insertions(+), 6 deletions(-)

--- a/Documentation/ABI/testing/sysfs-ata
+++ b/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -196,7 +196,7 @@ static struct {
 	{ XFER_PIO_0,			"XFER_PIO_0" },
 	{ XFER_PIO_SLOW,		"XFER_PIO_SLOW" }
 };
-ata_bitfield_name_match(xfer,ata_xfer_names)
+ata_bitfield_name_search(xfer, ata_xfer_names)
 
 /*
  * ATA Port attributes

[PATCH 5.15 223/247] mmc: block: Fix CQE recovery reset success

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit a051246b786af7e4a9d9219cc7038a6e8a411531 upstream.

The intention of the use of mmc_blk_reset_success() in
mmc_blk_cqe_recovery() was to prevent repeated resets when retrying and
getting the same error. However, that may not be the case - any amount
of time and I/O may pass before another recovery is needed, in which
case there would be no reason to deny it the opportunity to recover via
a reset if necessary. CQE recovery is expected seldom and failure to
recover (if the clear tasks command fails), even more seldom, so it is
better to allow the reset always, which can be done by calling
mmc_blk_reset_success() always.

Fixes: 1e8e55b67030c6 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220531171922.76080-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/block.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1482,8 +1482,7 @@ void mmc_blk_cqe_recovery(struct mmc_que
 	err = mmc_cqe_recovery(host);
 	if (err)
 		mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY);
-	else
-		mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY);
+	mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY);
 
 	pr_debug("%s: CQE recovery done\n", mmc_hostname(host));
 }

[PATCH 5.15 224/247] net: phy: dp83867: retrigger SGMII AN when link change

[Greg Kroah-Hartman]

From: Tan Tee Min <tee.min.tan@linux.intel.com>

commit c76acfb7e19dcc3a0964e0563770b1d11b8d4540 upstream.

There is a limitation in TI DP83867 PHY device where SGMII AN is only
triggered once after the device is booted up. Even after the PHY TPI is
down and up again, SGMII AN is not triggered and hence no new in-band
message from PHY to MAC side SGMII.

This could cause an issue during power up, when PHY is up prior to MAC.
At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t
receive new in-band message from TI PHY with correct link status, speed
and duplex info.

As suggested by TI, implemented a SW solution here to retrigger SGMII
Auto-Neg whenever there is a link change.

v2: Add Fixes tag in commit message.

Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/dp83867.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -137,6 +137,7 @@
 #define DP83867_DOWNSHIFT_2_COUNT	2
 #define DP83867_DOWNSHIFT_4_COUNT	4
 #define DP83867_DOWNSHIFT_8_COUNT	8
+#define DP83867_SGMII_AUTONEG_EN	BIT(7)
 
 /* CFG3 bits */
 #define DP83867_CFG3_INT_OE			BIT(7)
@@ -836,6 +837,32 @@ static int dp83867_phy_reset(struct phy_
 			 DP83867_PHYCR_FORCE_LINK_GOOD, 0);
 }
 
+static void dp83867_link_change_notify(struct phy_device *phydev)
+{
+	/* There is a limitation in DP83867 PHY device where SGMII AN is
+	 * only triggered once after the device is booted up. Even after the
+	 * PHY TPI is down and up again, SGMII AN is not triggered and
+	 * hence no new in-band message from PHY to MAC side SGMII.
+	 * This could cause an issue during power up, when PHY is up prior
+	 * to MAC. At this condition, once MAC side SGMII is up, MAC side
+	 * SGMII wouldn`t receive new in-band message from TI PHY with
+	 * correct link status, speed and duplex info.
+	 * Thus, implemented a SW solution here to retrigger SGMII Auto-Neg
+	 * whenever there is a link change.
+	 */
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		int val = 0;
+
+		val = phy_clear_bits(phydev, DP83867_CFG2,
+				     DP83867_SGMII_AUTONEG_EN);
+		if (val < 0)
+			return;
+
+		phy_set_bits(phydev, DP83867_CFG2,
+			     DP83867_SGMII_AUTONEG_EN);
+	}
+}
+
 static struct phy_driver dp83867_driver[] = {
 	{
 		.phy_id		= DP83867_PHY_ID,
@@ -860,6 +887,8 @@ static struct phy_driver dp83867_driver[
 
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
+
+		.link_change_notify = dp83867_link_change_notify,
 	},
 };
 module_phy_driver(dp83867_driver);

[PATCH 5.15 225/247] net: openvswitch: fix misuse of the cached connection on tuple changes

[Greg Kroah-Hartman]

From: Ilya Maximets <i.maximets@ovn.org>

commit 2061ecfdf2350994e5b61c43e50e98a7a70e95ee upstream.

If packet headers changed, the cached nfct is no longer relevant
for the packet and attempt to re-use it leads to the incorrect packet
classification.

This issue is causing broken connectivity in OpenStack deployments
with OVS/OVN due to hairpin traffic being unexpectedly dropped.

The setup has datapath flows with several conntrack actions and tuple
changes between them:

  actions:ct(commit,zone=8,mark=0/0x1,nat(src)),
          set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)),
          set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)),
          ct(zone=8),recirc(0x4)

After the first ct() action the packet headers are almost fully
re-written.  The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.

Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.

The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.

Cc: stable@vger.kernel.org
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html
Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/actions.c   |    6 ++++++
 net/openvswitch/conntrack.c |    4 +++-
 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -373,6 +373,7 @@ static void set_ip_addr(struct sk_buff *
 	update_ip_l4_checksum(skb, nh, *addr, new_addr);
 	csum_replace4(&nh->check, *addr, new_addr);
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
 	*addr = new_addr;
 }
 
@@ -420,6 +421,7 @@ static void set_ipv6_addr(struct sk_buff
 		update_ipv6_checksum(skb, l4_proto, addr, new_addr);
 
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
 	memcpy(addr, new_addr, sizeof(__be32[4]));
 }
 
@@ -660,6 +662,7 @@ static int set_nsh(struct sk_buff *skb,
 static void set_tp_port(struct sk_buff *skb, __be16 *port,
 			__be16 new_port, __sum16 *check)
 {
+	ovs_ct_clear(skb, NULL);
 	inet_proto_csum_replace2(check, skb, *port, new_port, false);
 	*port = new_port;
 }
@@ -699,6 +702,7 @@ static int set_udp(struct sk_buff *skb,
 		uh->dest = dst;
 		flow_key->tp.src = src;
 		flow_key->tp.dst = dst;
+		ovs_ct_clear(skb, NULL);
 	}
 
 	skb_clear_hash(skb);
@@ -761,6 +765,8 @@ static int set_sctp(struct sk_buff *skb,
 	sh->checksum = old_csum ^ old_correct_csum ^ new_csum;
 
 	skb_clear_hash(skb);
+	ovs_ct_clear(skb, NULL);
+
 	flow_key->tp.src = sh->source;
 	flow_key->tp.dst = sh->dest;
 
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1336,7 +1336,9 @@ int ovs_ct_clear(struct sk_buff *skb, st
 
 	nf_ct_put(ct);
 	nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
-	ovs_ct_fill_key(skb, key, false);
+
+	if (key)
+		ovs_ct_fill_key(skb, key, false);
 
 	return 0;
 }

[PATCH 5.15 226/247] writeback: Fix inode->i_io_list not be protected by inode->i_lock error

[Greg Kroah-Hartman]

From: Jchao Sun <sunjunchao2870@gmail.com>

commit 10e14073107dd0b6d97d9516a02845a8e501c2c9 upstream.

Commit b35250c0816c ("writeback: Protect inode->i_io_list with
inode->i_lock") made inode->i_io_list not only protected by
wb->list_lock but also inode->i_lock, but inode_io_list_move_locked()
was missed. Add lock there and also update comment describing
things protected by inode->i_lock. This also fixes a race where
__mark_inode_dirty() could move inode under flush worker's hands
and thus sync(2) could miss writing some inodes.

Fixes: b35250c0816c ("writeback: Protect inode->i_io_list with inode->i_lock")
Link: https://lore.kernel.org/r/20220524150540.12552-1-sunjunchao2870@gmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jchao Sun <sunjunchao2870@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fs-writeback.c |   37 ++++++++++++++++++++++++++++---------
 fs/inode.c        |    2 +-
 2 files changed, 29 insertions(+), 10 deletions(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -120,6 +120,7 @@ static bool inode_io_list_move_locked(st
 				      struct list_head *head)
 {
 	assert_spin_locked(&wb->list_lock);
+	assert_spin_locked(&inode->i_lock);
 
 	list_move(&inode->i_io_list, head);
 
@@ -1400,9 +1401,9 @@ static int move_expired_inodes(struct li
 		inode = wb_inode(delaying_queue->prev);
 		if (inode_dirtied_after(inode, dirtied_before))
 			break;
+		spin_lock(&inode->i_lock);
 		list_move(&inode->i_io_list, &tmp);
 		moved++;
-		spin_lock(&inode->i_lock);
 		inode->i_state |= I_SYNC_QUEUED;
 		spin_unlock(&inode->i_lock);
 		if (sb_is_blkdev_sb(inode->i_sb))
@@ -1418,7 +1419,12 @@ static int move_expired_inodes(struct li
 		goto out;
 	}
 
-	/* Move inodes from one superblock together */
+	/*
+	 * Although inode's i_io_list is moved from 'tmp' to 'dispatch_queue',
+	 * we don't take inode->i_lock here because it is just a pointless overhead.
+	 * Inode is already marked as I_SYNC_QUEUED so writeback list handling is
+	 * fully under our control.
+	 */
 	while (!list_empty(&tmp)) {
 		sb = wb_inode(tmp.prev)->i_sb;
 		list_for_each_prev_safe(pos, node, &tmp) {
@@ -1853,8 +1859,8 @@ static long writeback_sb_inodes(struct s
 			 * We'll have another go at writing back this inode
 			 * when we completed a full scan of b_io.
 			 */
-			spin_unlock(&inode->i_lock);
 			requeue_io(inode, wb);
+			spin_unlock(&inode->i_lock);
 			trace_writeback_sb_inodes_requeue(inode);
 			continue;
 		}
@@ -2389,6 +2395,7 @@ void __mark_inode_dirty(struct inode *in
 {
 	struct super_block *sb = inode->i_sb;
 	int dirtytime = 0;
+	struct bdi_writeback *wb = NULL;
 
 	trace_writeback_mark_inode_dirty(inode, flags);
 
@@ -2441,13 +2448,24 @@ void __mark_inode_dirty(struct inode *in
 		inode->i_state |= flags;
 
 		/*
+		 * Grab inode's wb early because it requires dropping i_lock and we
+		 * need to make sure following checks happen atomically with dirty
+		 * list handling so that we don't move inodes under flush worker's
+		 * hands.
+		 */
+		if (!was_dirty) {
+			wb = locked_inode_to_wb_and_lock_list(inode);
+			spin_lock(&inode->i_lock);
+		}
+
+		/*
 		 * If the inode is queued for writeback by flush worker, just
 		 * update its dirty state. Once the flush worker is done with
 		 * the inode it will place it on the appropriate superblock
 		 * list, based upon its state.
 		 */
 		if (inode->i_state & I_SYNC_QUEUED)
-			goto out_unlock_inode;
+			goto out_unlock;
 
 		/*
 		 * Only add valid (hashed) inodes to the superblock's
@@ -2455,22 +2473,19 @@ void __mark_inode_dirty(struct inode *in
 		 */
 		if (!S_ISBLK(inode->i_mode)) {
 			if (inode_unhashed(inode))
-				goto out_unlock_inode;
+				goto out_unlock;
 		}
 		if (inode->i_state & I_FREEING)
-			goto out_unlock_inode;
+			goto out_unlock;
 
 		/*
 		 * If the inode was already on b_dirty/b_io/b_more_io, don't
 		 * reposition it (that would break b_dirty time-ordering).
 		 */
 		if (!was_dirty) {
-			struct bdi_writeback *wb;
 			struct list_head *dirty_list;
 			bool wakeup_bdi = false;
 
-			wb = locked_inode_to_wb_and_lock_list(inode);
-
 			inode->dirtied_when = jiffies;
 			if (dirtytime)
 				inode->dirtied_time_when = jiffies;
@@ -2484,6 +2499,7 @@ void __mark_inode_dirty(struct inode *in
 							       dirty_list);
 
 			spin_unlock(&wb->list_lock);
+			spin_unlock(&inode->i_lock);
 			trace_writeback_dirty_inode_enqueue(inode);
 
 			/*
@@ -2498,6 +2514,9 @@ void __mark_inode_dirty(struct inode *in
 			return;
 		}
 	}
+out_unlock:
+	if (wb)
+		spin_unlock(&wb->list_lock);
 out_unlock_inode:
 	spin_unlock(&inode->i_lock);
 }
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -27,7 +27,7 @@
  * Inode locking rules:
  *
  * inode->i_lock protects:
- *   inode->i_state, inode->i_hash, __iget()
+ *   inode->i_state, inode->i_hash, __iget(), inode->i_io_list
  * Inode LRU list locks protect:
  *   inode->i_sb->s_inode_lru, inode->i_lru
  * inode->i_sb->s_inode_list_lock protects:

[PATCH 5.15 227/247] nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

[Greg Kroah-Hartman]

From: Martin Faltesek <mfaltesek@google.com>

commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream.

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered.  The fix is to change && to ||.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/st21nfca/se.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -319,7 +319,7 @@ int st21nfca_connectivity_event_received
 		 * AID		81	5 to 16
 		 * PARAMETERS	82	0 to 255
 		 */
-		if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
+		if (skb->len < NFC_MIN_AID_LENGTH + 2 ||
 		    skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
 			return -EPROTO;
 

[PATCH 5.15 228/247] nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

[Greg Kroah-Hartman]

From: Martin Faltesek <mfaltesek@google.com>

commit 996419e0594abb311fb958553809f24f38e7abbe upstream.

Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/st21nfca/se.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -330,22 +330,29 @@ int st21nfca_connectivity_event_received
 		transaction->aid_len = skb->data[1];
 
 		/* Checking if the length of the AID is valid */
-		if (transaction->aid_len > sizeof(transaction->aid))
+		if (transaction->aid_len > sizeof(transaction->aid)) {
+			devm_kfree(dev, transaction);
 			return -EINVAL;
+		}
 
 		memcpy(transaction->aid, &skb->data[2],
 		       transaction->aid_len);
 
 		/* Check next byte is PARAMETERS tag (82) */
 		if (skb->data[transaction->aid_len + 2] !=
-		    NFC_EVT_TRANSACTION_PARAMS_TAG)
+		    NFC_EVT_TRANSACTION_PARAMS_TAG) {
+			devm_kfree(dev, transaction);
 			return -EPROTO;
+		}
 
 		transaction->params_len = skb->data[transaction->aid_len + 3];
 
 		/* Total size is allocated (skb->len - 2) minus fixed array members */
-		if (transaction->params_len > ((skb->len - 2) - sizeof(struct nfc_evt_transaction)))
+		if (transaction->params_len > ((skb->len - 2) -
+		    sizeof(struct nfc_evt_transaction))) {
+			devm_kfree(dev, transaction);
 			return -EINVAL;
+		}
 
 		memcpy(transaction->params, skb->data +
 		       transaction->aid_len + 4, transaction->params_len);

[PATCH 5.15 229/247] nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION

[Greg Kroah-Hartman]

From: Martin Faltesek <mfaltesek@google.com>

commit f2e19b36593caed4c977c2f55aeba7408aeb2132 upstream.

The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seem intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.

The last validation check for transaction->params_len is also incorrect
since it employs the same accounting error.

To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as those checks are
moved ahead of memory allocation.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/st21nfca/se.c |   62 +++++++++++++++++++++++-----------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -304,6 +304,8 @@ int st21nfca_connectivity_event_received
 	int r = 0;
 	struct device *dev = &hdev->ndev->dev;
 	struct nfc_evt_transaction *transaction;
+	u32 aid_len;
+	u8 params_len;
 
 	pr_debug("connectivity gate event: %x\n", event);
 
@@ -312,50 +314,48 @@ int st21nfca_connectivity_event_received
 		r = nfc_se_connectivity(hdev->ndev, host);
 	break;
 	case ST21NFCA_EVT_TRANSACTION:
-		/*
-		 * According to specification etsi 102 622
+		/* According to specification etsi 102 622
 		 * 11.2.2.4 EVT_TRANSACTION Table 52
 		 * Description	Tag	Length
 		 * AID		81	5 to 16
 		 * PARAMETERS	82	0 to 255
+		 *
+		 * The key differences are aid storage length is variably sized
+		 * in the packet, but fixed in nfc_evt_transaction, and that the aid_len
+		 * is u8 in the packet, but u32 in the structure, and the tags in
+		 * the packet are not included in nfc_evt_transaction.
+		 *
+		 * size in bytes: 1          1       5-16 1             1           0-255
+		 * offset:        0          1       2    aid_len + 2   aid_len + 3 aid_len + 4
+		 * member name:   aid_tag(M) aid_len aid  params_tag(M) params_len  params
+		 * example:       0x81       5-16    X    0x82 0-255    X
 		 */
-		if (skb->len < NFC_MIN_AID_LENGTH + 2 ||
-		    skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
+		if (skb->len < 2 || skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
 			return -EPROTO;
 
-		transaction = devm_kzalloc(dev, skb->len - 2, GFP_KERNEL);
-		if (!transaction)
-			return -ENOMEM;
+		aid_len = skb->data[1];
+
+		if (skb->len < aid_len + 4 || aid_len > sizeof(transaction->aid))
+			return -EPROTO;
 
-		transaction->aid_len = skb->data[1];
+		params_len = skb->data[aid_len + 3];
 
-		/* Checking if the length of the AID is valid */
-		if (transaction->aid_len > sizeof(transaction->aid)) {
-			devm_kfree(dev, transaction);
-			return -EINVAL;
-		}
-
-		memcpy(transaction->aid, &skb->data[2],
-		       transaction->aid_len);
-
-		/* Check next byte is PARAMETERS tag (82) */
-		if (skb->data[transaction->aid_len + 2] !=
-		    NFC_EVT_TRANSACTION_PARAMS_TAG) {
-			devm_kfree(dev, transaction);
+		/* Verify PARAMETERS tag is (82), and final check that there is enough
+		 * space in the packet to read everything.
+		 */
+		if ((skb->data[aid_len + 2] != NFC_EVT_TRANSACTION_PARAMS_TAG) ||
+		    (skb->len < aid_len + 4 + params_len))
 			return -EPROTO;
-		}
 
-		transaction->params_len = skb->data[transaction->aid_len + 3];
+		transaction = devm_kzalloc(dev, sizeof(*transaction) + params_len, GFP_KERNEL);
+		if (!transaction)
+			return -ENOMEM;
 
-		/* Total size is allocated (skb->len - 2) minus fixed array members */
-		if (transaction->params_len > ((skb->len - 2) -
-		    sizeof(struct nfc_evt_transaction))) {
-			devm_kfree(dev, transaction);
-			return -EINVAL;
-		}
+		transaction->aid_len = aid_len;
+		transaction->params_len = params_len;
 
-		memcpy(transaction->params, skb->data +
-		       transaction->aid_len + 4, transaction->params_len);
+		memcpy(transaction->aid, &skb->data[2], aid_len);
+		memcpy(transaction->params, &skb->data[aid_len + 4], params_len);
 
 		r = nfc_se_transaction(hdev->ndev, host, transaction);
 	break;

[PATCH 5.15 230/247] ixgbe: fix bcast packets Rx on VF after promisc removal

[Greg Kroah-Hartman]

From: Olivier Matz <olivier.matz@6wind.com>

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream.

After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.

In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.

This flag is already set by default in ixgbe_set_vmolr() on VF reset.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -1157,9 +1157,9 @@ static int ixgbe_update_vf_xcast_mode(st
 
 	switch (xcast_mode) {
 	case IXGBEVF_XCAST_MODE_NONE:
-		disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
+		disable = IXGBE_VMOLR_ROMPE |
 			  IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
-		enable = 0;
+		enable = IXGBE_VMOLR_BAM;
 		break;
 	case IXGBEVF_XCAST_MODE_MULTI:
 		disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;

[PATCH 5.15 231/247] ixgbe: fix unexpected VLAN Rx in promisc mode on VF

[Greg Kroah-Hartman]

From: Olivier Matz <olivier.matz@6wind.com>

commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream.

When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.

For instance, in this situation:

┌────────┐    ┌────────┐    ┌────────┐
│        │    │        │    │        │
│        │    │        │    │        │
│     VF0├────┤VF1  VF2├────┤VF3     │
│        │    │        │    │        │
└────────┘    └────────┘    └────────┘
   VM1           VM2           VM3

vf 0:  vlan 1000
vf 1:  vlan 1000
vf 2:  vlan 1001
vf 3:  vlan 1001

If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.

This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.

This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -1181,9 +1181,9 @@ static int ixgbe_update_vf_xcast_mode(st
 			return -EPERM;
 		}
 
-		disable = 0;
+		disable = IXGBE_VMOLR_VPE;
 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
-			 IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
+			 IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE;
 		break;
 	default:
 		return -EOPNOTSUPP;

[PATCH 5.15 232/247] Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream.

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/mouse/bcm5974.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -942,17 +942,22 @@ static int bcm5974_probe(struct usb_inte
 	if (!dev->tp_data)
 		goto err_free_bt_buffer;
 
-	if (dev->bt_urb)
+	if (dev->bt_urb) {
 		usb_fill_int_urb(dev->bt_urb, udev,
 				 usb_rcvintpipe(udev, cfg->bt_ep),
 				 dev->bt_data, dev->cfg.bt_datalen,
 				 bcm5974_irq_button, dev, 1);
 
+		dev->bt_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	}
+
 	usb_fill_int_urb(dev->tp_urb, udev,
 			 usb_rcvintpipe(udev, cfg->tp_ep),
 			 dev->tp_data, dev->cfg.tp_datalen,
 			 bcm5974_irq_trackpad, dev, 1);
 
+	dev->tp_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
 	/* create bcm5974 device */
 	usb_make_path(udev, dev->phys, sizeof(dev->phys));
 	strlcat(dev->phys, "/input0", sizeof(dev->phys));

[PATCH 5.15 233/247] vduse: Fix NULL pointer dereference on sysfs access

[Greg Kroah-Hartman]

From: Xie Yongji <xieyongji@bytedance.com>

commit b27ee76c74dc831d6e092eaebc2dfc9c0beed1c9 upstream.

The control device has no drvdata. So we will get a
NULL pointer dereference when accessing control
device's msg_timeout attribute via sysfs:

[ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271)
[ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094)
[ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59)
[ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088)
[ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164)
[ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230)
[ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041)
[ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238)
[ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1))
[ 132.876319][ T3644] kernel_read (fs/read_write.c:459)
[ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94)
[ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186)
[ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207)
[ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189)
[ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132)
[ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419)

To fix it, don't create the unneeded attribute for
control device anymore.

Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20220426073656.229-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vdpa/vdpa_user/vduse_dev.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/vdpa/vdpa_user/vduse_dev.c
+++ b/drivers/vdpa/vdpa_user/vduse_dev.c
@@ -1336,9 +1336,9 @@ static int vduse_create_dev(struct vduse
 
 	dev->minor = ret;
 	dev->msg_timeout = VDUSE_MSG_DEFAULT_TIMEOUT;
-	dev->dev = device_create(vduse_class, NULL,
-				 MKDEV(MAJOR(vduse_major), dev->minor),
-				 dev, "%s", config->name);
+	dev->dev = device_create_with_groups(vduse_class, NULL,
+				MKDEV(MAJOR(vduse_major), dev->minor),
+				dev, vduse_dev_groups, "%s", config->name);
 	if (IS_ERR(dev->dev)) {
 		ret = PTR_ERR(dev->dev);
 		goto err_dev;
@@ -1585,7 +1585,6 @@ static int vduse_init(void)
 		return PTR_ERR(vduse_class);
 
 	vduse_class->devnode = vduse_devnode;
-	vduse_class->dev_groups = vduse_dev_groups;
 
 	ret = alloc_chrdev_region(&vduse_major, 0, VDUSE_DEV_MAX, "vduse");
 	if (ret)

[PATCH 5.15 234/247] powerpc: Dont select HAVE_IRQ_EXIT_ON_IRQ_STACK

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 1346d00e1bdfd4067f92bc14e8a6131a01de4190 upstream.

The HAVE_IRQ_EXIT_ON_IRQ_STACK option tells generic code that irq_exit()
is called while still running on the hard irq stack (hardirq_ctx[] in
the powerpc code).

Selecting the option means the generic code will *not* switch to the
softirq stack before running softirqs, because the code is already
running on the (mostly empty) hard irq stack.

But since commit 1b1b6a6f4cc0 ("powerpc: handle irq_enter/irq_exit in
interrupt handler wrappers"), irq_exit() is now called on the regular task
stack, not the hard irq stack.

That's because previously irq_exit() was called in __do_irq() which is
run on the hard irq stack, but now it is called in
interrupt_async_exit_prepare() which is called from do_irq() constructed
by the wrapper macro, which is after the switch back to the task stack.

So drop HAVE_IRQ_EXIT_ON_IRQ_STACK from the Kconfig. This will mean an
extra stack switch when processing some interrupts, but should
significantly reduce the likelihood of stack overflow.

It also means the softirq stack will be used for running softirqs from
other interrupts that don't use the hard irq stack, eg. timer interrupts.

Fixes: 1b1b6a6f4cc0 ("powerpc: handle irq_enter/irq_exit in interrupt handler wrappers")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525032639.1947280-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/Kconfig |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -217,7 +217,6 @@ config PPC
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
 	select HAVE_IOREMAP_PROT
-	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA			if DEFAULT_UIMAGE

[PATCH 5.15 235/247] drm/bridge: analogix_dp: Support PSR-exit to disable transition

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit ca871659ec1606d33b1e76de8d4cf924cf627e34 upstream.

Most eDP panel functions only work correctly when the panel is not in
self-refresh. In particular, analogix_dp_bridge_disable() tends to hit
AUX channel errors if the panel is in self-refresh.

Given the above, it appears that so far, this driver assumes that we are
never in self-refresh when it comes time to fully disable the bridge.
Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc
enabled state in drm_atomic_remove_fb, v2."), this tended to be true,
because we would automatically disable the pipe when framebuffers were
removed, and so we'd typically disable the bridge shortly after the last
display activity.

However, that is not guaranteed: an idle (self-refresh) display pipe may
be disabled, e.g., when switching CRTCs. We need to exit PSR first.

Stable notes: this is definitely a bugfix, and the bug has likely
existed in some form for quite a while. It may predate the "PSR helpers"
refactor, but the code looked very different before that, and it's
probably not worth rewriting the fix.

Cc: <stable@vger.kernel.org>
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c |   42 +++++++++++++++++++--
 1 file changed, 38 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1269,6 +1269,25 @@ static int analogix_dp_bridge_attach(str
 }
 
 static
+struct drm_crtc *analogix_dp_get_old_crtc(struct analogix_dp_device *dp,
+					  struct drm_atomic_state *state)
+{
+	struct drm_encoder *encoder = dp->encoder;
+	struct drm_connector *connector;
+	struct drm_connector_state *conn_state;
+
+	connector = drm_atomic_get_old_connector_for_encoder(state, encoder);
+	if (!connector)
+		return NULL;
+
+	conn_state = drm_atomic_get_old_connector_state(state, connector);
+	if (!conn_state)
+		return NULL;
+
+	return conn_state->crtc;
+}
+
+static
 struct drm_crtc *analogix_dp_get_new_crtc(struct analogix_dp_device *dp,
 					  struct drm_atomic_state *state)
 {
@@ -1448,14 +1467,16 @@ analogix_dp_bridge_atomic_disable(struct
 {
 	struct drm_atomic_state *old_state = old_bridge_state->base.state;
 	struct analogix_dp_device *dp = bridge->driver_private;
-	struct drm_crtc *crtc;
+	struct drm_crtc *old_crtc, *new_crtc;
+	struct drm_crtc_state *old_crtc_state = NULL;
 	struct drm_crtc_state *new_crtc_state = NULL;
+	int ret;
 
-	crtc = analogix_dp_get_new_crtc(dp, old_state);
-	if (!crtc)
+	new_crtc = analogix_dp_get_new_crtc(dp, old_state);
+	if (!new_crtc)
 		goto out;
 
-	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc);
+	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, new_crtc);
 	if (!new_crtc_state)
 		goto out;
 
@@ -1464,6 +1485,19 @@ analogix_dp_bridge_atomic_disable(struct
 		return;
 
 out:
+	old_crtc = analogix_dp_get_old_crtc(dp, old_state);
+	if (old_crtc) {
+		old_crtc_state = drm_atomic_get_old_crtc_state(old_state,
+							       old_crtc);
+
+		/* When moving from PSR to fully disabled, exit PSR first. */
+		if (old_crtc_state && old_crtc_state->self_refresh_active) {
+			ret = analogix_dp_disable_psr(dp);
+			if (ret)
+				DRM_ERROR("Failed to disable psr (%d)\n", ret);
+		}
+	}
+
 	analogix_dp_bridge_disable(bridge);
 }
 

[PATCH 5.15 236/247] drm/atomic: Force bridge self-refresh-exit on CRTC switch

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit e54a4424925a27ed94dff046db3ce5caf4b1e748 upstream.

It's possible to change which CRTC is in use for a given
connector/encoder/bridge while we're in self-refresh without fully
disabling the connector/encoder/bridge along the way. This can confuse
the bridge encoder/bridge, because
(a) it needs to track the SR state (trying to perform "active"
    operations while the panel is still in SR can be Bad(TM)); and
(b) it tracks the SR state via the CRTC state (and after the switch, the
    previous SR state is lost).

Thus, we need to either somehow carry the self-refresh state over to the
new CRTC, or else force an encoder/bridge self-refresh transition during
such a switch.

I choose the latter, so we disable the encoder (and exit PSR) before
attaching it to the new CRTC (where we can continue to assume a clean
(non-self-refresh) state).

This fixes PSR issues seen on Rockchip RK3399 systems with
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c.

Change in v2:

- Drop "->enable" condition; this could possibly be "->active" to
  reflect the intended hardware state, but it also is a little
  over-specific. We want to make a transition through "disabled" any
  time we're exiting PSR at the same time as a CRTC switch.
  (Thanks Liu Ying)

Cc: Liu Ying <victor.liu@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_atomic_helper.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -996,9 +996,19 @@ crtc_needs_disable(struct drm_crtc_state
 		return drm_atomic_crtc_effectively_active(old_state);
 
 	/*
-	 * We need to run through the crtc_funcs->disable() function if the CRTC
-	 * is currently on, if it's transitioning to self refresh mode, or if
-	 * it's in self refresh mode and needs to be fully disabled.
+	 * We need to disable bridge(s) and CRTC if we're transitioning out of
+	 * self-refresh and changing CRTCs at the same time, because the
+	 * bridge tracks self-refresh status via CRTC state.
+	 */
+	if (old_state->self_refresh_active &&
+	    old_state->crtc != new_state->crtc)
+		return true;
+
+	/*
+	 * We also need to run through the crtc_funcs->disable() function if
+	 * the CRTC is currently on, if it's transitioning to self refresh
+	 * mode, or if it's in self refresh mode and needs to be fully
+	 * disabled.
 	 */
 	return old_state->active ||
 	       (old_state->self_refresh_active && !new_state->active) ||

[PATCH 5.15 237/247] drm/amdgpu: update VCN codec support for Yellow Carp

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit 97e50305542f384741a5b45699aba349fe9fca73 upstream.

Supports AV1.  Mesa already has support for this and
doesn't rely on the kernel caps for yellow carp, so
this was already working from an application perspective.

Fixes: 554398174d98 ("amdgpu/nv.c - Added video codec support for Yellow Carp")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2002
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/nv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c
index d016e3c3e221..b3fba8dea63c 100644
--- a/drivers/gpu/drm/amd/amdgpu/nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/nv.c
@@ -170,6 +170,7 @@ static const struct amdgpu_video_codec_info yc_video_codecs_decode_array[] = {
 	{codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC, 8192, 4352, 186)},
 	{codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9, 8192, 4352, 0)},
 	{codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG, 4096, 4096, 0)},
+	{codec_info_build(AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1, 8192, 4352, 0)},
 };
 
 static const struct amdgpu_video_codecs yc_video_codecs_decode = {
-- 
2.36.1

[PATCH 5.15 238/247] powerpc/32: Fix overread/overwrite of thread_struct via ptrace

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/ptrace/ptrace-fpu.c |   20 ++++++++++++++------
 arch/powerpc/kernel/ptrace/ptrace.c     |    3 +++
 2 files changed, 17 insertions(+), 6 deletions(-)

--- a/arch/powerpc/kernel/ptrace/ptrace-fpu.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-fpu.c
@@ -17,9 +17,13 @@ int ptrace_get_fpr(struct task_struct *c
 
 #ifdef CONFIG_PPC_FPU_REGS
 	flush_fp_to_thread(child);
-	if (fpidx < (PT_FPSCR - PT_FPR0))
-		memcpy(data, &child->thread.TS_FPR(fpidx), sizeof(long));
-	else
+	if (fpidx < (PT_FPSCR - PT_FPR0)) {
+		if (IS_ENABLED(CONFIG_PPC32))
+			// On 32-bit the index we are passed refers to 32-bit words
+			*data = ((u32 *)child->thread.fp_state.fpr)[fpidx];
+		else
+			memcpy(data, &child->thread.TS_FPR(fpidx), sizeof(long));
+	} else
 		*data = child->thread.fp_state.fpscr;
 #else
 	*data = 0;
@@ -39,9 +43,13 @@ int ptrace_put_fpr(struct task_struct *c
 
 #ifdef CONFIG_PPC_FPU_REGS
 	flush_fp_to_thread(child);
-	if (fpidx < (PT_FPSCR - PT_FPR0))
-		memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long));
-	else
+	if (fpidx < (PT_FPSCR - PT_FPR0)) {
+		if (IS_ENABLED(CONFIG_PPC32))
+			// On 32-bit the index we are passed refers to 32-bit words
+			((u32 *)child->thread.fp_state.fpr)[fpidx] = data;
+		else
+			memcpy(&child->thread.TS_FPR(fpidx), &data, sizeof(long));
+	} else
 		child->thread.fp_state.fpscr = data;
 #endif
 
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -446,4 +446,7 @@ void __init pt_regs_check(void)
 	 * real registers.
 	 */
 	BUILD_BUG_ON(PT_DSCR < sizeof(struct user_pt_regs) / sizeof(unsigned long));
+
+	// ptrace_get/put_fpr() rely on PPC32 and VSX being incompatible
+	BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC32) && IS_ENABLED(CONFIG_VSX));
 }

[PATCH 5.15 239/247] powerpc/mm: Switch obsolete dssall to .long

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

commit d51f86cfd8e378d4907958db77da3074f6dce3ba upstream.

The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).

LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/ppc-opcode.h   |    2 ++
 arch/powerpc/kernel/idle.c              |    2 +-
 arch/powerpc/kernel/idle_6xx.S          |    2 +-
 arch/powerpc/kernel/l2cr_6xx.S          |    6 +++---
 arch/powerpc/kernel/swsusp_32.S         |    2 +-
 arch/powerpc/kernel/swsusp_asm64.S      |    2 +-
 arch/powerpc/mm/mmu_context.c           |    2 +-
 arch/powerpc/platforms/powermac/cache.S |    4 ++--
 8 files changed, 12 insertions(+), 10 deletions(-)

--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -249,6 +249,7 @@
 #define PPC_INST_COPY			0x7c20060c
 #define PPC_INST_DCBA			0x7c0005ec
 #define PPC_INST_DCBA_MASK		0xfc0007fe
+#define PPC_INST_DSSALL			0x7e00066c
 #define PPC_INST_ISEL			0x7c00001e
 #define PPC_INST_ISEL_MASK		0xfc00003e
 #define PPC_INST_LSWI			0x7c0004aa
@@ -576,6 +577,7 @@
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_RAW_DCBZL(a, b))
 #define	PPC_DIVDE(t, a, b)	stringify_in_c(.long PPC_RAW_DIVDE(t, a, b))
 #define	PPC_DIVDEU(t, a, b)	stringify_in_c(.long PPC_RAW_DIVDEU(t, a, b))
+#define PPC_DSSALL		stringify_in_c(.long PPC_INST_DSSALL)
 #define PPC_LQARX(t, a, b, eh)	stringify_in_c(.long PPC_RAW_LQARX(t, a, b, eh))
 #define PPC_STQCX(t, a, b)	stringify_in_c(.long PPC_RAW_STQCX(t, a, b))
 #define PPC_MADDHD(t, a, b, c)	stringify_in_c(.long PPC_RAW_MADDHD(t, a, b, c))
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -82,7 +82,7 @@ void power4_idle(void)
 		return;
 
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile("DSSALL ; sync" ::: "memory");
+		asm volatile(PPC_DSSALL " ; sync" ::: "memory");
 
 	power4_idle_nap();
 
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -129,7 +129,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
 	mtspr	SPRN_HID0,r4
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	lwz	r8,TI_LOCAL_FLAGS(r2)	/* set napping bit */
--- a/arch/powerpc/kernel/l2cr_6xx.S
+++ b/arch/powerpc/kernel/l2cr_6xx.S
@@ -96,7 +96,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
 
 	/* Stop DST streams */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
@@ -292,7 +292,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
 	isync
 
 	/* Stop DST streams */
-	DSSALL
+	PPC_DSSALL
 	sync
 
 	/* Get the current enable bit of the L3CR into r4 */
@@ -401,7 +401,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
 _GLOBAL(__flush_disable_L1)
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  	sync
 
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -181,7 +181,7 @@ _GLOBAL(swsusp_arch_resume)
 #ifdef CONFIG_ALTIVEC
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
  	sync
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -142,7 +142,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_LPAR
 _GLOBAL(swsusp_arch_resume)
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	sync
 
--- a/arch/powerpc/mm/mmu_context.c
+++ b/arch/powerpc/mm/mmu_context.c
@@ -81,7 +81,7 @@ void switch_mm_irqs_off(struct mm_struct
 	 * context
 	 */
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile ("dssall");
+		asm volatile (PPC_DSSALL);
 
 	if (!new_on_cpu)
 		membarrier_arch_switch_mm(prev, next, tsk);
--- a/arch/powerpc/platforms/powermac/cache.S
+++ b/arch/powerpc/platforms/powermac/cache.S
@@ -48,7 +48,7 @@ flush_disable_75x:
 
 	/* Stop DST streams */
 BEGIN_FTR_SECTION
-	DSSALL
+	PPC_DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
@@ -197,7 +197,7 @@ flush_disable_745x:
 	isync
 
 	/* Stop prefetch streams */
-	DSSALL
+	PPC_DSSALL
 	sync
 
 	/* Disable L2 prefetching */

[PATCH 5.15 240/247] drm/ast: Create threshold values for AST2600

[Greg Kroah-Hartman]

From: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>

commit bcc77411e8a65929655cef7b63a36000724cdc4b upstream.

The threshold value is used for AST2600 only.

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117083643.41493-1-kuohsiang_chou@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/ast/ast_mode.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -474,7 +474,10 @@ static void ast_set_color_reg(struct ast
 static void ast_set_crtthd_reg(struct ast_private *ast)
 {
 	/* Set Threshold */
-	if (ast->chip == AST2300 || ast->chip == AST2400 ||
+	if (ast->chip == AST2600) {
+		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0xe0);
+		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0xa0);
+	} else if (ast->chip == AST2300 || ast->chip == AST2400 ||
 	    ast->chip == AST2500) {
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x78);
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x60);

[PATCH 5.15 241/247] random: avoid checking crng_ready() twice in random_init()

[Greg Kroah-Hartman]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 9b29b6b20376ab64e1b043df6301d8a92378e631 upstream.

The current flow expands to:

    if (crng_ready())
       ...
    else if (...)
        if (!crng_ready())
            ...

The second crng_ready() call is redundant, but can't so easily be
optimized out by the compiler.

This commit simplifies that to:

    if (crng_ready()
        ...
    else if (...)
        ...

Fixes: 560181c27b58 ("random: move initialization functions out of hot pages")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -838,7 +838,7 @@ int __init random_init(const char *comma
 	if (crng_ready())
 		crng_reseed();
 	else if (trust_cpu)
-		credit_init_bits(arch_bytes * 8);
+		_credit_init_bits(arch_bytes * 8);
 
 	return 0;
 }

[PATCH 5.15 242/247] random: mark bootloader randomness code as __init

[Greg Kroah-Hartman]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 39e0f991a62ed5efabd20711a7b6e7da92603170 upstream.

add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.

Cc: stable@vger.kernel.org
Fixes: 428826f5358c ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c  |    7 +++----
 include/linux/random.h |    2 +-
 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -789,8 +789,8 @@ static void __cold _credit_init_bits(siz
  *
  **********************************************************************/
 
-static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
-static bool trust_bootloader __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_BOOTLOADER);
+static bool trust_cpu __initdata = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
+static bool trust_bootloader __initdata = IS_ENABLED(CONFIG_RANDOM_TRUST_BOOTLOADER);
 static int __init parse_trust_cpu(char *arg)
 {
 	return kstrtobool(arg, &trust_cpu);
@@ -886,13 +886,12 @@ EXPORT_SYMBOL_GPL(add_hwgenerator_random
  * Handle random seed passed by bootloader, and credit it if
  * CONFIG_RANDOM_TRUST_BOOTLOADER is set.
  */
-void __cold add_bootloader_randomness(const void *buf, size_t len)
+void __init add_bootloader_randomness(const void *buf, size_t len)
 {
 	mix_pool_bytes(buf, len);
 	if (trust_bootloader)
 		credit_init_bits(len * 8);
 }
-EXPORT_SYMBOL_GPL(add_bootloader_randomness);
 
 struct fast_pool {
 	struct work_struct mix;
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -13,7 +13,7 @@
 struct notifier_block;
 
 void add_device_randomness(const void *buf, size_t len);
-void add_bootloader_randomness(const void *buf, size_t len);
+void __init add_bootloader_randomness(const void *buf, size_t len);
 void add_input_randomness(unsigned int type, unsigned int code,
 			  unsigned int value) __latent_entropy;
 void add_interrupt_randomness(int irq) __latent_entropy;

[PATCH 5.15 243/247] random: account for arch randomness in bits

[Greg Kroah-Hartman]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 77fc95f8c0dc9e1f8e620ec14d2fb65028fb7adc upstream.

Rather than accounting in bytes and multiplying (shifting), we can just
account in bits and avoid the shift. The main motivation for this is
there are other patches in flux that expand this code a bit, and
avoiding the duplication of "* 8" everywhere makes things a bit clearer.

Cc: stable@vger.kernel.org
Fixes: 12e45a2a6308 ("random: credit architectural init the exact amount")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -813,7 +813,7 @@ early_param("random.trust_bootloader", p
 int __init random_init(const char *command_line)
 {
 	ktime_t now = ktime_get_real();
-	unsigned int i, arch_bytes;
+	unsigned int i, arch_bits;
 	unsigned long entropy;
 
 #if defined(LATENT_ENTROPY_PLUGIN)
@@ -821,12 +821,12 @@ int __init random_init(const char *comma
 	_mix_pool_bytes(compiletime_seed, sizeof(compiletime_seed));
 #endif
 
-	for (i = 0, arch_bytes = BLAKE2S_BLOCK_SIZE;
+	for (i = 0, arch_bits = BLAKE2S_BLOCK_SIZE * 8;
 	     i < BLAKE2S_BLOCK_SIZE; i += sizeof(entropy)) {
 		if (!arch_get_random_seed_long_early(&entropy) &&
 		    !arch_get_random_long_early(&entropy)) {
 			entropy = random_get_entropy();
-			arch_bytes -= sizeof(entropy);
+			arch_bits -= sizeof(entropy) * 8;
 		}
 		_mix_pool_bytes(&entropy, sizeof(entropy));
 	}
@@ -838,7 +838,7 @@ int __init random_init(const char *comma
 	if (crng_ready())
 		crng_reseed();
 	else if (trust_cpu)
-		_credit_init_bits(arch_bytes * 8);
+		_credit_init_bits(arch_bits);
 
 	return 0;
 }

[PATCH 5.15 244/247] md/raid0: Ignore RAID0 layout if the second zone has only one device

[Greg Kroah-Hartman]

From: Pascal Hambourg <pascal@plouf.fr.eu.org>

commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream.

The RAID0 layout is irrelevant if all members have the same size so the
array has only one zone. It is *also* irrelevant if the array has two
zones and the second zone has only one device, for example if the array
has two members of different sizes.

So in that case it makes sense to allow assembly even when the layout is
undefined, like what is done when the array has only one zone.

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid0.c |   31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -128,21 +128,6 @@ static int create_strip_zones(struct mdd
 	pr_debug("md/raid0:%s: FINAL %d zones\n",
 		 mdname(mddev), conf->nr_strip_zones);
 
-	if (conf->nr_strip_zones == 1) {
-		conf->layout = RAID0_ORIG_LAYOUT;
-	} else if (mddev->layout == RAID0_ORIG_LAYOUT ||
-		   mddev->layout == RAID0_ALT_MULTIZONE_LAYOUT) {
-		conf->layout = mddev->layout;
-	} else if (default_layout == RAID0_ORIG_LAYOUT ||
-		   default_layout == RAID0_ALT_MULTIZONE_LAYOUT) {
-		conf->layout = default_layout;
-	} else {
-		pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
-		       mdname(mddev));
-		pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
-		err = -ENOTSUPP;
-		goto abort;
-	}
 	/*
 	 * now since we have the hard sector sizes, we can make sure
 	 * chunk size is a multiple of that sector size
@@ -273,6 +258,22 @@ static int create_strip_zones(struct mdd
 			 (unsigned long long)smallest->sectors);
 	}
 
+	if (conf->nr_strip_zones == 1 || conf->strip_zone[1].nb_dev == 1) {
+		conf->layout = RAID0_ORIG_LAYOUT;
+	} else if (mddev->layout == RAID0_ORIG_LAYOUT ||
+		   mddev->layout == RAID0_ALT_MULTIZONE_LAYOUT) {
+		conf->layout = mddev->layout;
+	} else if (default_layout == RAID0_ORIG_LAYOUT ||
+		   default_layout == RAID0_ALT_MULTIZONE_LAYOUT) {
+		conf->layout = default_layout;
+	} else {
+		pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
+		       mdname(mddev));
+		pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
+		err = -EOPNOTSUPP;
+		goto abort;
+	}
+
 	pr_debug("md/raid0:%s: done.\n", mdname(mddev));
 	*private_conf = conf;
 

[PATCH 5.15 245/247] net/sched: act_police: more accurate MTU policing

[Greg Kroah-Hartman]

From: Davide Caratti <dcaratti@redhat.com>

commit 4ddc844eb81da59bfb816d8d52089aba4e59e269 upstream.

in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.

Improve the accuracy of MTU policing as follows:
 - account for mac_len for non-GSO packets at TC ingress.
 - compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_police.c                              |   16 +++++-
 tools/testing/selftests/net/forwarding/tc_police.sh |   52 ++++++++++++++++++++
 2 files changed, 67 insertions(+), 1 deletion(-)

--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -239,6 +239,20 @@ release_idr:
 	return err;
 }
 
+static bool tcf_police_mtu_check(struct sk_buff *skb, u32 limit)
+{
+	u32 len;
+
+	if (skb_is_gso(skb))
+		return skb_gso_validate_mac_len(skb, limit);
+
+	len = qdisc_pkt_len(skb);
+	if (skb_at_tc_ingress(skb))
+		len += skb->mac_len;
+
+	return len <= limit;
+}
+
 static int tcf_police_act(struct sk_buff *skb, const struct tc_action *a,
 			  struct tcf_result *res)
 {
@@ -261,7 +275,7 @@ static int tcf_police_act(struct sk_buff
 			goto inc_overlimits;
 	}
 
-	if (qdisc_pkt_len(skb) <= p->tcfp_mtu) {
+	if (tcf_police_mtu_check(skb, p->tcfp_mtu)) {
 		if (!p->rate_present && !p->pps_present) {
 			ret = p->tcfp_result;
 			goto end;
--- a/tools/testing/selftests/net/forwarding/tc_police.sh
+++ b/tools/testing/selftests/net/forwarding/tc_police.sh
@@ -37,6 +37,8 @@ ALL_TESTS="
 	police_tx_mirror_test
 	police_pps_rx_test
 	police_pps_tx_test
+	police_mtu_rx_test
+	police_mtu_tx_test
 "
 NUM_NETIFS=6
 source tc_common.sh
@@ -346,6 +348,56 @@ police_pps_tx_test()
 	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
 }
 
+police_mtu_common_test() {
+	RET=0
+
+	local test_name=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter add dev $dev $direction protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police mtu 1042 conform-exceed drop/ok
+
+	# to count "conform" packets
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1001 -c 10 -q
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 3 -q
+
+	tc_check_packets "dev $dev $direction" 101 13
+	check_err $? "wrong packet counter"
+
+	# "exceed" packets
+	local overlimits_t0=$(tc_rule_stats_get ${dev} 1 ${direction} .overlimits)
+	test ${overlimits_t0} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits_t0}"
+
+	# "conform" packets
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "forwarding error"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $dev $direction protocol ip pref 1 handle 101 flower
+
+	log_test "$test_name"
+}
+
+police_mtu_rx_test()
+{
+	police_mtu_common_test "police mtu (rx)" $rp1 ingress
+}
+
+police_mtu_tx_test()
+{
+	police_mtu_common_test "police mtu (tx)" $rp2 egress
+}
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}

[PATCH 5.15 246/247] PCI: qcom: Fix pipe clock imbalance

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit fdf6a2f533115ec5d4d9629178f8196331f1ac50 upstream.

Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support
for SDM845 PCIe controller"), which enables the pipe clock both in init()
and in post_init() but only disables in post_deinit().

Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.

Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable@vger.kernel.org      # 5.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1203,12 +1203,6 @@ static int qcom_pcie_init_2_7_0(struct q
 		goto err_disable_clocks;
 	}
 
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		goto err_disable_clocks;
-	}
-
 	/* configure PCIe to RC mode */
 	writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
 

[PATCH 5.15 247/247] zonefs: fix handling of explicit_open option on mount

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@opensource.wdc.com>

commit a2a513be7139b279f1b5b2cee59c6c4950c34346 upstream.

Ignoring the explicit_open mount option on mount for devices that do not
have a limit on the number of open zones must be done after the mount
options are parsed and set in s_mount_opts. Move the check to ignore
the explicit_open option after the call to zonefs_parse_options() in
zonefs_fill_super().

Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/zonefs/super.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -1694,11 +1694,6 @@ static int zonefs_fill_super(struct supe
 	sbi->s_mount_opts = ZONEFS_MNTOPT_ERRORS_RO;
 	sbi->s_max_open_zones = bdev_max_open_zones(sb->s_bdev);
 	atomic_set(&sbi->s_open_zones, 0);
-	if (!sbi->s_max_open_zones &&
-	    sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) {
-		zonefs_info(sb, "No open zones limit. Ignoring explicit_open mount option\n");
-		sbi->s_mount_opts &= ~ZONEFS_MNTOPT_EXPLICIT_OPEN;
-	}
 
 	ret = zonefs_read_super(sb);
 	if (ret)
@@ -1717,6 +1712,12 @@ static int zonefs_fill_super(struct supe
 	zonefs_info(sb, "Mounting %u zones",
 		    blkdev_nr_zones(sb->s_bdev->bd_disk));
 
+	if (!sbi->s_max_open_zones &&
+	    sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) {
+		zonefs_info(sb, "No open zones limit. Ignoring explicit_open mount option\n");
+		sbi->s_mount_opts &= ~ZONEFS_MNTOPT_EXPLICIT_OPEN;
+	}
+
 	/* Create root directory inode */
 	ret = -ENOMEM;
 	inode = new_inode(sb);

Re: [PATCH 5.15 000/247] 5.15.47-rc1 review

[Guenter Roeck]

On Mon, Jun 13, 2022 at 12:08:22PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.47 release.
> There are 247 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
> Anything received after that time might be too late.
> 

Early feedback:

Building arm:allmodconfig ... failed
--------------
Error log:
In file included from include/linux/kernel.h:16,
                 from include/linux/crypto.h:16,
                 from include/crypto/hash.h:11,
                 from lib/iov_iter.c:2:
lib/iov_iter.c: In function 'iter_xarray_get_pages':
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast

This will likely affect affects all branches where commit 6c77676645ad
("iov_iter: Fix iter_xarray_get_pages{,_alloc}()") was backported.

The fix is upstream commit 1c27f1fc1549 ("iov_iter: fix build issue due
to possible type mis-match").

Guenter

Re: [PATCH 5.15 000/247] 5.15.47-rc1 review

[Greg Kroah-Hartman]

On Mon, Jun 13, 2022 at 06:18:38AM -0700, Guenter Roeck wrote:
> On Mon, Jun 13, 2022 at 12:08:22PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.47 release.
> > There are 247 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Early feedback:
> 
> Building arm:allmodconfig ... failed
> --------------
> Error log:
> In file included from include/linux/kernel.h:16,
>                  from include/linux/crypto.h:16,
>                  from include/crypto/hash.h:11,
>                  from lib/iov_iter.c:2:
> lib/iov_iter.c: In function 'iter_xarray_get_pages':
> include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
> 
> This will likely affect affects all branches where commit 6c77676645ad
> ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()") was backported.
> 
> The fix is upstream commit 1c27f1fc1549 ("iov_iter: fix build issue due
> to possible type mis-match").

{sigh}

For various reasons of being rushed today (and totally busy this past
weekend), I didn't run my "find if any fixes are needed in the queues"
scripts, and this got missed, sorry about that.

I'll go queue this up now and run the scripts to verify nothing else got
missed.

thanks,

greg k-h

RE: [PATCH 5.15 000/247] 5.15.47-rc1 review

[Fox Chen]

On Mon, 13 Jun 2022 12:08:22 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.15.47 release.
> There are 247 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.47-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.15.47-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.15 000/247] 5.15.47-rc1 review

[Bagas Sanjaya]

On Mon, Jun 13, 2022 at 12:08:22PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.47 release.
> There are 247 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm (multi_v7_defconfig, GCC 12.1.0,
ARMv7 with neon FPU) and arm64 (bcm2711_defconfig, GCC 12.1.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.15 167/247] iio: st_sensors: Add a local lock for protecting odr

[Jonathan Cameron]

On Mon, 13 Jun 2022 12:11:09 +0200
Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> From: Miquel Raynal <miquel.raynal@bootlin.com>
> 
> [ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ]
> 
> Right now the (framework) mlock lock is (ab)used for multiple purposes:
> 1- protecting concurrent accesses over the odr local cache
> 2- avoid changing samplig frequency whilst buffer is running
> 
> Let's start by handling situation #1 with a local lock.

This is harmless, but not a fix but rather part of a long running
effort to abstract away the use of iio_dev->mlock.

What's there before this isn't broken, but rather isn't the way
we would do it today.

Thanks,

Jonathan

> 
> Suggested-by: Jonathan Cameron <jic23@kernel.org>
> Cc: Denis Ciocca <denis.ciocca@st.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  .../iio/common/st_sensors/st_sensors_core.c   | 24 ++++++++++++++-----
>  include/linux/iio/common/st_sensors.h         |  3 +++
>  2 files changed, 21 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 0bbb090b108c..aff981551617 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -71,16 +71,18 @@ static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
>  
>  int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
>  {
> -	int err;
> +	int err = 0;
>  	struct st_sensor_odr_avl odr_out = {0, 0};
>  	struct st_sensor_data *sdata = iio_priv(indio_dev);
>  
> +	mutex_lock(&sdata->odr_lock);
> +
>  	if (!sdata->sensor_settings->odr.mask)
> -		return 0;
> +		goto unlock_mutex;
>  
>  	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
>  	if (err < 0)
> -		goto st_sensors_match_odr_error;
> +		goto unlock_mutex;
>  
>  	if ((sdata->sensor_settings->odr.addr ==
>  					sdata->sensor_settings->pw.addr) &&
> @@ -103,7 +105,9 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
>  	if (err >= 0)
>  		sdata->odr = odr_out.hz;
>  
> -st_sensors_match_odr_error:
> +unlock_mutex:
> +	mutex_unlock(&sdata->odr_lock);
> +
>  	return err;
>  }
>  EXPORT_SYMBOL(st_sensors_set_odr);
> @@ -365,6 +369,8 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
>  	struct st_sensors_platform_data *of_pdata;
>  	int err = 0;
>  
> +	mutex_init(&sdata->odr_lock);
> +
>  	/* If OF/DT pdata exists, it will take precedence of anything else */
>  	of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata);
>  	if (IS_ERR(of_pdata))
> @@ -558,18 +564,24 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
>  		err = -EBUSY;
>  		goto out;
>  	} else {
> +		mutex_lock(&sdata->odr_lock);
>  		err = st_sensors_set_enable(indio_dev, true);
> -		if (err < 0)
> +		if (err < 0) {
> +			mutex_unlock(&sdata->odr_lock);
>  			goto out;
> +		}
>  
>  		msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
>  		err = st_sensors_read_axis_data(indio_dev, ch, val);
> -		if (err < 0)
> +		if (err < 0) {
> +			mutex_unlock(&sdata->odr_lock);
>  			goto out;
> +		}
>  
>  		*val = *val >> ch->scan_type.shift;
>  
>  		err = st_sensors_set_enable(indio_dev, false);
> +		mutex_unlock(&sdata->odr_lock);
>  	}
>  out:
>  	mutex_unlock(&indio_dev->mlock);
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index 8bdbaf3f3796..69f4a1f6b536 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -238,6 +238,7 @@ struct st_sensor_settings {
>   * @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
>   * @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
>   * @buffer_data: Data used by buffer part.
> + * @odr_lock: Local lock for preventing concurrent ODR accesses/changes
>   */
>  struct st_sensor_data {
>  	struct device *dev;
> @@ -263,6 +264,8 @@ struct st_sensor_data {
>  	s64 hw_timestamp;
>  
>  	char buffer_data[ST_SENSORS_MAX_BUFFER_SIZE] ____cacheline_aligned;
> +
> +	struct mutex odr_lock;
>  };
>  
>  #ifdef CONFIG_IIO_BUFFER