[PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

This series supports common bridge support for Samsung MIPI DSIM
which is used in Exynos and i.MX8MM SoC's.

The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.

Inki Dae: please note that this series added on top of exynos-drm-next
since few exynos dsi changes are not been part of drm-misc-next.
Request you to pick these via exynos-drm-next, or let me know if you
have any comments?

Patch 0001 - 0002: find child DSI bridge and panel

Patch 0003 - 0004: optional PHY, PMS_P offset

Patch 0005       : introduce hw_type

Patch 0006	 : fixing host init

Patch 0007	 : atomic_check

Patch 0008	 : input_bus_flags

Patch 0009	 : atomic_get_input_bus_fmts

Patch 0010 - 0011: component vs bridge

Patch 0012	 : DSIM bridge

Patch 0013 - 0014: i.MX8M Mini/Nano

Patch 0015 - 0016: i.MX8M Plus

Changes for v15:
- drop drm_of helpers
- re-added find DSI bridge/Panel helper in dsim
- collect RB from Marek V
- fixed leading underscore in function names
- commit messages updated
- rebased on exynos-drm-next

Changes for v13:
- remove devm call for DSI panel or bridge finding
- rebased on drm-misc-next

Changes for v12:
- collect RB from Marek V
- add te_irq_handler hook
- fix comments from Marek V
- update atomic_get_input_bus_fmts logic

Changes for v11:
- collect RB from Frieder Schrempf
- collect ACK from Rob
- collect ACK from Robert
- fix BIT macro replacements
- fix checkpatch --strict warnings
- fix unneeded commit text
- drop extra lines

Changes for v10:
- rebase on drm-misc-next
- add drm_of_dsi_find_panel_or_bridge
- add devm_drm_of_dsi_get_bridge
- fix host initialization (Thanks to Marek Szyprowski)
- rearrange the tiny patches for easy to review
- update simple names for enum hw_type
- add is_hw_exynos macro
- rework on commit messages

Changes for v9:
- rebase on drm-misc-next
- drop drm bridge attach fix for Exynos
- added prepare_prev_first flag
- added pre_enable_prev_first flag
- fix bridge chain order for exynos
- added fix for Exynos host init for first DSI transfer
- added MEDIA_BUS_FMT_FIXED
- return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
  list is unsupported.
- added MEDIA_BUS_FMT_YUYV10_1X20
- added MEDIA_BUS_FMT_YUYV12_1X24

Changes for v8:
* fixed comment lines
* fixed commit messages
* fixed video mode bits
* collect Marek Ack
* fixed video mode bit names
* update input formats logic
* added imx8mplus support

Changes for v7:
* fix the drm bridge attach chain for exynos drm dsi driver
* fix the hw_type checking logic

Changes for v6:
* handle previous bridge for exynos dsi while attaching bridge 

Changes for v5:
* bridge changes to support multi-arch
* updated and clear commit messages
* add hw_type via plat data
* removed unneeded quirk
* rebased on linux-next

Changes for v4:
* include Inki Dae in MAINTAINERS
* remove dsi_driver probe in exynos_drm_drv to support multi-arch build
* update init handling to ensure host init done on first cmd transfer

Changes for v3:
* fix the mult-arch build
* fix dsi host init
* updated commit messages

Changes for v2:
* fix bridge handling
* fix dsi host init
* correct the commit messages

Tested in Engicam i.Core MX8M Mini SoM.

Repo:
https://github.com/openedev/kernel/tree/imx8mm-dsi-v15

v13:
https://lore.kernel.org/all/20230227113925.875425-1-jagan@amarulasolutions.com/

Any inputs?
Jagan.

Jagan Teki (14):
  drm: exynos: dsi: Drop explicit call to bridge detach
  drm: exynos: dsi: Lookup OF-graph or Child node devices
  drm: exynos: dsi: Mark PHY as optional
  drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
  drm: exynos: dsi: Introduce hw_type platform data
  drm: exynos: dsi: Add atomic check
  drm: exynos: dsi: Add input_bus_flags
  drm: exynos: dsi: Add atomic_get_input_bus_fmts
  drm: exynos: dsi: Consolidate component and bridge
  drm: exynos: dsi: Add host helper for te_irq_handler
  drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
  dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
  drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
  dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support

Marek Szyprowski (1):
  drm: exynos: dsi: Handle proper host initialization

Marek Vasut (1):
  drm: bridge: samsung-dsim: Add i.MX8M Plus support

 .../bindings/display/exynos/exynos_dsim.txt   |    2 +
 MAINTAINERS                                   |    9 +
 drivers/gpu/drm/bridge/Kconfig                |   12 +
 drivers/gpu/drm/bridge/Makefile               |    1 +
 drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
 drivers/gpu/drm/exynos/Kconfig                |    1 +
 drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
 include/drm/bridge/samsung-dsim.h             |  115 +
 8 files changed, 2190 insertions(+), 1732 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
 create mode 100644 include/drm/bridge/samsung-dsim.h

-- 
2.25.1

[PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

This series supports common bridge support for Samsung MIPI DSIM
which is used in Exynos and i.MX8MM SoC's.

The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.

Inki Dae: please note that this series added on top of exynos-drm-next
since few exynos dsi changes are not been part of drm-misc-next.
Request you to pick these via exynos-drm-next, or let me know if you
have any comments?

Patch 0001 - 0002: find child DSI bridge and panel

Patch 0003 - 0004: optional PHY, PMS_P offset

Patch 0005       : introduce hw_type

Patch 0006	 : fixing host init

Patch 0007	 : atomic_check

Patch 0008	 : input_bus_flags

Patch 0009	 : atomic_get_input_bus_fmts

Patch 0010 - 0011: component vs bridge

Patch 0012	 : DSIM bridge

Patch 0013 - 0014: i.MX8M Mini/Nano

Patch 0015 - 0016: i.MX8M Plus

Changes for v15:
- drop drm_of helpers
- re-added find DSI bridge/Panel helper in dsim
- collect RB from Marek V
- fixed leading underscore in function names
- commit messages updated
- rebased on exynos-drm-next

Changes for v13:
- remove devm call for DSI panel or bridge finding
- rebased on drm-misc-next

Changes for v12:
- collect RB from Marek V
- add te_irq_handler hook
- fix comments from Marek V
- update atomic_get_input_bus_fmts logic

Changes for v11:
- collect RB from Frieder Schrempf
- collect ACK from Rob
- collect ACK from Robert
- fix BIT macro replacements
- fix checkpatch --strict warnings
- fix unneeded commit text
- drop extra lines

Changes for v10:
- rebase on drm-misc-next
- add drm_of_dsi_find_panel_or_bridge
- add devm_drm_of_dsi_get_bridge
- fix host initialization (Thanks to Marek Szyprowski)
- rearrange the tiny patches for easy to review
- update simple names for enum hw_type
- add is_hw_exynos macro
- rework on commit messages

Changes for v9:
- rebase on drm-misc-next
- drop drm bridge attach fix for Exynos
- added prepare_prev_first flag
- added pre_enable_prev_first flag
- fix bridge chain order for exynos
- added fix for Exynos host init for first DSI transfer
- added MEDIA_BUS_FMT_FIXED
- return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
  list is unsupported.
- added MEDIA_BUS_FMT_YUYV10_1X20
- added MEDIA_BUS_FMT_YUYV12_1X24

Changes for v8:
* fixed comment lines
* fixed commit messages
* fixed video mode bits
* collect Marek Ack
* fixed video mode bit names
* update input formats logic
* added imx8mplus support

Changes for v7:
* fix the drm bridge attach chain for exynos drm dsi driver
* fix the hw_type checking logic

Changes for v6:
* handle previous bridge for exynos dsi while attaching bridge 

Changes for v5:
* bridge changes to support multi-arch
* updated and clear commit messages
* add hw_type via plat data
* removed unneeded quirk
* rebased on linux-next

Changes for v4:
* include Inki Dae in MAINTAINERS
* remove dsi_driver probe in exynos_drm_drv to support multi-arch build
* update init handling to ensure host init done on first cmd transfer

Changes for v3:
* fix the mult-arch build
* fix dsi host init
* updated commit messages

Changes for v2:
* fix bridge handling
* fix dsi host init
* correct the commit messages

Tested in Engicam i.Core MX8M Mini SoM.

Repo:
https://github.com/openedev/kernel/tree/imx8mm-dsi-v15

v13:
https://lore.kernel.org/all/20230227113925.875425-1-jagan@amarulasolutions.com/

Any inputs?
Jagan.

Jagan Teki (14):
  drm: exynos: dsi: Drop explicit call to bridge detach
  drm: exynos: dsi: Lookup OF-graph or Child node devices
  drm: exynos: dsi: Mark PHY as optional
  drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
  drm: exynos: dsi: Introduce hw_type platform data
  drm: exynos: dsi: Add atomic check
  drm: exynos: dsi: Add input_bus_flags
  drm: exynos: dsi: Add atomic_get_input_bus_fmts
  drm: exynos: dsi: Consolidate component and bridge
  drm: exynos: dsi: Add host helper for te_irq_handler
  drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
  dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
  drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
  dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support

Marek Szyprowski (1):
  drm: exynos: dsi: Handle proper host initialization

Marek Vasut (1):
  drm: bridge: samsung-dsim: Add i.MX8M Plus support

 .../bindings/display/exynos/exynos_dsim.txt   |    2 +
 MAINTAINERS                                   |    9 +
 drivers/gpu/drm/bridge/Kconfig                |   12 +
 drivers/gpu/drm/bridge/Makefile               |    1 +
 drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
 drivers/gpu/drm/exynos/Kconfig                |    1 +
 drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
 include/drm/bridge/samsung-dsim.h             |  115 +
 8 files changed, 2190 insertions(+), 1732 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
 create mode 100644 include/drm/bridge/samsung-dsim.h

-- 
2.25.1

[PATCH v15 01/16] drm: exynos: dsi: Drop explicit call to bridge detach

[Jagan Teki]

Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.

Drop the explicit call chain to detach the bridge.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12, v11:
- none
Changes for v10:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 06d6513ddaae..df15501b1075 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1531,8 +1531,6 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
 	struct exynos_dsi *dsi = host_to_dsi(host);
 	struct drm_device *drm = dsi->encoder.dev;
 
-	if (dsi->out_bridge->funcs->detach)
-		dsi->out_bridge->funcs->detach(dsi->out_bridge);
 	dsi->out_bridge = NULL;
 
 	if (drm->mode_config.poll_enabled)
-- 
2.25.1

[PATCH v15 01/16] drm: exynos: dsi: Drop explicit call to bridge detach

[Jagan Teki]

Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.

Drop the explicit call chain to detach the bridge.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12, v11:
- none
Changes for v10:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 06d6513ddaae..df15501b1075 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1531,8 +1531,6 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
 	struct exynos_dsi *dsi = host_to_dsi(host);
 	struct drm_device *drm = dsi->encoder.dev;
 
-	if (dsi->out_bridge->funcs->detach)
-		dsi->out_bridge->funcs->detach(dsi->out_bridge);
 	dsi->out_bridge = NULL;
 
 	if (drm->mode_config.poll_enabled)
-- 
2.25.1

[PATCH v15 02/16] drm: exynos: dsi: Lookup OF-graph or Child node devices

[Jagan Teki]

In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.

1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.

There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.

An example of the downstream panel represented as a child node,

&dsi {
   compatible = "samsung,exynos5433-mipi-dsi";

   ports {
        port@0 {
             reg = <0>;

             dsi_to_mic: endpoint {
                  remote-endpoint = <&mic_to_dsi>;
             };
        };
   };

   panel@0 {
        reg = <0>;
   };
};

An example of the downstream bridge represented as a port node,

&i2c4 {
   bridge@2c {
	compatible = "ti,sn65dsi84";

        ports {
             port@0 {
                  reg = <0>;

                  bridge_in_dsi: endpoint {
                       remote-endpoint = <&dsi_out_bridge>;
                       data-lanes = <1 2>;
                  };
             };

	     port@2 {
	          reg = <2>;

                  bridge_out_panel: endpoint {
                       remote-endpoint = <&panel_out_bridge>;
                  };
             };
        };
   };
};

&dsi {
   compatible = "fsl,imx8mm-mipi-dsim";

   port {
        dsi_in_lcdif: endpoint@0 {
	     reg = <0>;
	     remote-endpoint = <&lcdif_out_dsi>;
	};

	dsi_out_bridge: endpoint@1 {
	     reg = <1>;
	     remote-endpoint = <&bridge_in_dsi>;
	};
   };
};

An example of the downstream bridge represented as a ports node,

&dsi {
   compatible = "fsl,imx8mm-mipi-dsim";

   ports {
	port@0 {
	     reg = <0>;

	     dsi_in_lcdif: endpoint@0 {
		  reg = <0>;
		  remote-endpoint = <&lcdif_out_dsi>;
	     };
	};

	port@1 {
	     reg = <1>;

	     dsi_out_bridge: endpoint {
		  remote-endpoint = <&bridge_in_dsi>;
	     };
	};
};

In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.

This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.

This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.

It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.

Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.

This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- droped from drm_of
- added in exynos dsi
- updated commit messages
Changes for v13, v12:
- none
Changes for v11:
- drop extra line
Changes for v10:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 +++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index df15501b1075..f44a5a702ad5 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1470,18 +1470,52 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 	struct device *dev = dsi->dev;
 	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm = encoder->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *remote;
 	struct drm_panel *panel;
 	int ret;
 
-	panel = of_drm_find_panel(device->dev.of_node);
+	/**
+	 * Devices can also be child nodes when we also control that device
+	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
+	 *
+	 * Lookup for a child node of the given parent that isn't either port
+	 * or ports.
+	 */
+	for_each_available_child_of_node(np, remote) {
+		if (of_node_name_eq(remote, "port") ||
+		    of_node_name_eq(remote, "ports"))
+			continue;
+
+		goto of_find_panel_or_bridge;
+	}
+
+	/*
+	 * of_graph_get_remote_node() produces a noisy error message if port
+	 * node isn't found and the absence of the port is a legit case here,
+	 * so at first we silently check whether graph presents in the
+	 * device-tree node.
+	 */
+	if (!of_graph_is_present(np))
+		return -ENODEV;
+
+	remote = of_graph_get_remote_node(np, 1, 0);
+
+of_find_panel_or_bridge:
+	if (!remote)
+		return -ENODEV;
+
+	panel = of_drm_find_panel(remote);
 	if (!IS_ERR(panel)) {
 		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
 	} else {
-		dsi->out_bridge = of_drm_find_bridge(device->dev.of_node);
+		dsi->out_bridge = of_drm_find_bridge(remote);
 		if (!dsi->out_bridge)
 			dsi->out_bridge = ERR_PTR(-EINVAL);
 	}
 
+	of_node_put(remote);
+
 	if (IS_ERR(dsi->out_bridge)) {
 		ret = PTR_ERR(dsi->out_bridge);
 		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
-- 
2.25.1

[PATCH v15 02/16] drm: exynos: dsi: Lookup OF-graph or Child node devices

[Jagan Teki]

In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.

1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.

There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.

An example of the downstream panel represented as a child node,

&dsi {
   compatible = "samsung,exynos5433-mipi-dsi";

   ports {
        port@0 {
             reg = <0>;

             dsi_to_mic: endpoint {
                  remote-endpoint = <&mic_to_dsi>;
             };
        };
   };

   panel@0 {
        reg = <0>;
   };
};

An example of the downstream bridge represented as a port node,

&i2c4 {
   bridge@2c {
	compatible = "ti,sn65dsi84";

        ports {
             port@0 {
                  reg = <0>;

                  bridge_in_dsi: endpoint {
                       remote-endpoint = <&dsi_out_bridge>;
                       data-lanes = <1 2>;
                  };
             };

	     port@2 {
	          reg = <2>;

                  bridge_out_panel: endpoint {
                       remote-endpoint = <&panel_out_bridge>;
                  };
             };
        };
   };
};

&dsi {
   compatible = "fsl,imx8mm-mipi-dsim";

   port {
        dsi_in_lcdif: endpoint@0 {
	     reg = <0>;
	     remote-endpoint = <&lcdif_out_dsi>;
	};

	dsi_out_bridge: endpoint@1 {
	     reg = <1>;
	     remote-endpoint = <&bridge_in_dsi>;
	};
   };
};

An example of the downstream bridge represented as a ports node,

&dsi {
   compatible = "fsl,imx8mm-mipi-dsim";

   ports {
	port@0 {
	     reg = <0>;

	     dsi_in_lcdif: endpoint@0 {
		  reg = <0>;
		  remote-endpoint = <&lcdif_out_dsi>;
	     };
	};

	port@1 {
	     reg = <1>;

	     dsi_out_bridge: endpoint {
		  remote-endpoint = <&bridge_in_dsi>;
	     };
	};
};

In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.

This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.

This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.

It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.

Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.

This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- droped from drm_of
- added in exynos dsi
- updated commit messages
Changes for v13, v12:
- none
Changes for v11:
- drop extra line
Changes for v10:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 +++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index df15501b1075..f44a5a702ad5 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1470,18 +1470,52 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 	struct device *dev = dsi->dev;
 	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm = encoder->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *remote;
 	struct drm_panel *panel;
 	int ret;
 
-	panel = of_drm_find_panel(device->dev.of_node);
+	/**
+	 * Devices can also be child nodes when we also control that device
+	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
+	 *
+	 * Lookup for a child node of the given parent that isn't either port
+	 * or ports.
+	 */
+	for_each_available_child_of_node(np, remote) {
+		if (of_node_name_eq(remote, "port") ||
+		    of_node_name_eq(remote, "ports"))
+			continue;
+
+		goto of_find_panel_or_bridge;
+	}
+
+	/*
+	 * of_graph_get_remote_node() produces a noisy error message if port
+	 * node isn't found and the absence of the port is a legit case here,
+	 * so at first we silently check whether graph presents in the
+	 * device-tree node.
+	 */
+	if (!of_graph_is_present(np))
+		return -ENODEV;
+
+	remote = of_graph_get_remote_node(np, 1, 0);
+
+of_find_panel_or_bridge:
+	if (!remote)
+		return -ENODEV;
+
+	panel = of_drm_find_panel(remote);
 	if (!IS_ERR(panel)) {
 		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
 	} else {
-		dsi->out_bridge = of_drm_find_bridge(device->dev.of_node);
+		dsi->out_bridge = of_drm_find_bridge(remote);
 		if (!dsi->out_bridge)
 			dsi->out_bridge = ERR_PTR(-EINVAL);
 	}
 
+	of_node_put(remote);
+
 	if (IS_ERR(dsi->out_bridge)) {
 		ret = PTR_ERR(dsi->out_bridge);
 		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
-- 
2.25.1

[PATCH v15 03/16] drm: exynos: dsi: Mark PHY as optional

[Jagan Teki]

The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.

In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.

So, mark the phy get as optional.

Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12:
- none
Changes for v11:
- collect Frieder RB
Changes for v10:
- add Plus in commit message
- collect Marek RB
Changes for v9, v8, v7, v6, v5, v4, v3, v2:
- none
Changes for v1:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index f44a5a702ad5..af16af404e87 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1732,7 +1732,7 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	if (IS_ERR(dsi->reg_base))
 		return PTR_ERR(dsi->reg_base);
 
-	dsi->phy = devm_phy_get(dev, "dsim");
+	dsi->phy = devm_phy_optional_get(dev, "dsim");
 	if (IS_ERR(dsi->phy)) {
 		dev_info(dev, "failed to get dsim phy\n");
 		return PTR_ERR(dsi->phy);
-- 
2.25.1

[PATCH v15 03/16] drm: exynos: dsi: Mark PHY as optional

[Jagan Teki]

The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.

In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.

So, mark the phy get as optional.

Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12:
- none
Changes for v11:
- collect Frieder RB
Changes for v10:
- add Plus in commit message
- collect Marek RB
Changes for v9, v8, v7, v6, v5, v4, v3, v2:
- none
Changes for v1:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index f44a5a702ad5..af16af404e87 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1732,7 +1732,7 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	if (IS_ERR(dsi->reg_base))
 		return PTR_ERR(dsi->reg_base);
 
-	dsi->phy = devm_phy_get(dev, "dsim");
+	dsi->phy = devm_phy_optional_get(dev, "dsim");
 	if (IS_ERR(dsi->phy)) {
 		dev_info(dev, "failed to get dsim phy\n");
 		return PTR_ERR(dsi->phy);
-- 
2.25.1

[PATCH v15 04/16] drm: exynos: dsi: Add platform PLL_P (PMS_P) offset

[Jagan Teki]

Look like PLL PMS_P offset value varies between platforms that have
Samsung DSIM IP.

However, there is no clear evidence for it as both Exynos and i.MX
8M Mini Application Processor Reference Manual is still referring
the PMS_P offset as 13.

The offset 13 is not working for i.MX8M Mini SoCs but the downstream
NXP sec-dsim.c driver is using offset 14 for i.MX8M Mini SoC platforms
[1] [2].

PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().

Not sure whether it is reference manual documentation or something
else but this patch trusts the downstream code and handle PLL_P offset
via platform driver data so-that imx8mm driver data shall use
pll_p_offset to 14.

Similar to Mini the i.MX8M Nano/Plus also has P=14, unlike Exynos.

[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n210
[2] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n211

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12, v11, v10, v9:
- none
Changes for v8:
- updated commit message for 8M Nano/Plus
Changes for v7, v6:
- none
Changes for v5:
- updated clear commit message
Changes for v4, v3, v2:
- none
Changes for v1:
- updated commit message
- add downstream driver link

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index af16af404e87..603fed107fd1 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -194,7 +194,7 @@
 /* DSIM_PLLCTRL */
 #define DSIM_FREQ_BAND(x)		((x) << 24)
 #define DSIM_PLL_EN			(1 << 23)
-#define DSIM_PLL_P(x)			((x) << 13)
+#define DSIM_PLL_P(x, offset)		((x) << (offset))
 #define DSIM_PLL_M(x)			((x) << 4)
 #define DSIM_PLL_S(x)			((x) << 1)
 
@@ -263,6 +263,7 @@ struct exynos_dsi_driver_data {
 	unsigned int max_freq;
 	unsigned int wait_for_reset;
 	unsigned int num_bits_resol;
+	unsigned int pll_p_offset;
 	const unsigned int *reg_values;
 };
 
@@ -471,6 +472,7 @@ static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -483,6 +485,7 @@ static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -493,6 +496,7 @@ static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -504,6 +508,7 @@ static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 0,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5433_reg_values,
 };
 
@@ -515,6 +520,7 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 1,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5422_reg_values,
 };
 
@@ -628,7 +634,8 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
 	writel(driver_data->reg_values[PLL_TIMER],
 			dsi->reg_base + driver_data->plltmr_reg);
 
-	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
+	reg = DSIM_PLL_EN | DSIM_PLL_P(p, driver_data->pll_p_offset) |
+	      DSIM_PLL_M(m) | DSIM_PLL_S(s);
 
 	if (driver_data->has_freqband) {
 		static const unsigned long freq_bands[] = {
-- 
2.25.1

[PATCH v15 04/16] drm: exynos: dsi: Add platform PLL_P (PMS_P) offset

[Jagan Teki]

Look like PLL PMS_P offset value varies between platforms that have
Samsung DSIM IP.

However, there is no clear evidence for it as both Exynos and i.MX
8M Mini Application Processor Reference Manual is still referring
the PMS_P offset as 13.

The offset 13 is not working for i.MX8M Mini SoCs but the downstream
NXP sec-dsim.c driver is using offset 14 for i.MX8M Mini SoC platforms
[1] [2].

PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().

Not sure whether it is reference manual documentation or something
else but this patch trusts the downstream code and handle PLL_P offset
via platform driver data so-that imx8mm driver data shall use
pll_p_offset to 14.

Similar to Mini the i.MX8M Nano/Plus also has P=14, unlike Exynos.

[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n210
[2] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n211

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13, v12, v11, v10, v9:
- none
Changes for v8:
- updated commit message for 8M Nano/Plus
Changes for v7, v6:
- none
Changes for v5:
- updated clear commit message
Changes for v4, v3, v2:
- none
Changes for v1:
- updated commit message
- add downstream driver link

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index af16af404e87..603fed107fd1 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -194,7 +194,7 @@
 /* DSIM_PLLCTRL */
 #define DSIM_FREQ_BAND(x)		((x) << 24)
 #define DSIM_PLL_EN			(1 << 23)
-#define DSIM_PLL_P(x)			((x) << 13)
+#define DSIM_PLL_P(x, offset)		((x) << (offset))
 #define DSIM_PLL_M(x)			((x) << 4)
 #define DSIM_PLL_S(x)			((x) << 1)
 
@@ -263,6 +263,7 @@ struct exynos_dsi_driver_data {
 	unsigned int max_freq;
 	unsigned int wait_for_reset;
 	unsigned int num_bits_resol;
+	unsigned int pll_p_offset;
 	const unsigned int *reg_values;
 };
 
@@ -471,6 +472,7 @@ static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -483,6 +485,7 @@ static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -493,6 +496,7 @@ static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
 	.max_freq = 1000,
 	.wait_for_reset = 1,
 	.num_bits_resol = 11,
+	.pll_p_offset = 13,
 	.reg_values = reg_values,
 };
 
@@ -504,6 +508,7 @@ static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 0,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5433_reg_values,
 };
 
@@ -515,6 +520,7 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
 	.max_freq = 1500,
 	.wait_for_reset = 1,
 	.num_bits_resol = 12,
+	.pll_p_offset = 13,
 	.reg_values = exynos5422_reg_values,
 };
 
@@ -628,7 +634,8 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
 	writel(driver_data->reg_values[PLL_TIMER],
 			dsi->reg_base + driver_data->plltmr_reg);
 
-	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
+	reg = DSIM_PLL_EN | DSIM_PLL_P(p, driver_data->pll_p_offset) |
+	      DSIM_PLL_M(m) | DSIM_PLL_S(s);
 
 	if (driver_data->has_freqband) {
 		static const unsigned long freq_bands[] = {
-- 
2.25.1

[PATCH v15 05/16] drm: exynos: dsi: Introduce hw_type platform data

[Jagan Teki]

Samsung MIPI DSIM controller is common DSI IP that can be used
in various SoCs like Exynos, i.MX8M Mini/Nano/Plus.

Add hw_type enum via platform_data so that accessing the different
controller data between various platforms becomes easy and meaningful.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- drop extra line
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"
- update enum type names

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 83 ++++++++++++++++++++-----
 1 file changed, 68 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 603fed107fd1..64cf69995750 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -254,6 +254,15 @@ struct exynos_dsi_transfer {
 #define DSIM_STATE_CMD_LPM		BIT(2)
 #define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
 
+enum exynos_dsi_type {
+	DSIM_TYPE_EXYNOS3250,
+	DSIM_TYPE_EXYNOS4210,
+	DSIM_TYPE_EXYNOS5410,
+	DSIM_TYPE_EXYNOS5422,
+	DSIM_TYPE_EXYNOS5433,
+	DSIM_TYPE_COUNT,
+};
+
 struct exynos_dsi_driver_data {
 	const unsigned int *reg_ofs;
 	unsigned int plltmr_reg;
@@ -267,6 +276,10 @@ struct exynos_dsi_driver_data {
 	const unsigned int *reg_values;
 };
 
+struct exynos_dsi_plat_data {
+	enum exynos_dsi_type hw_type;
+};
+
 struct exynos_dsi {
 	struct drm_encoder encoder;
 	struct mipi_dsi_host dsi_host;
@@ -297,6 +310,7 @@ struct exynos_dsi {
 	struct list_head transfer_list;
 
 	const struct exynos_dsi_driver_data *driver_data;
+	const struct exynos_dsi_plat_data *plat_data;
 };
 
 #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -524,18 +538,13 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
 	.reg_values = exynos5422_reg_values,
 };
 
-static const struct of_device_id exynos_dsi_of_match[] = {
-	{ .compatible = "samsung,exynos3250-mipi-dsi",
-	  .data = &exynos3_dsi_driver_data },
-	{ .compatible = "samsung,exynos4210-mipi-dsi",
-	  .data = &exynos4_dsi_driver_data },
-	{ .compatible = "samsung,exynos5410-mipi-dsi",
-	  .data = &exynos5_dsi_driver_data },
-	{ .compatible = "samsung,exynos5422-mipi-dsi",
-	  .data = &exynos5422_dsi_driver_data },
-	{ .compatible = "samsung,exynos5433-mipi-dsi",
-	  .data = &exynos5433_dsi_driver_data },
-	{ }
+static const struct exynos_dsi_driver_data *
+exynos_dsi_types[DSIM_TYPE_COUNT] = {
+	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS4210] = &exynos4_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
 };
 
 static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
@@ -1468,8 +1477,6 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.attach				= exynos_dsi_attach,
 };
 
-MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
-
 static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
@@ -1704,7 +1711,8 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	dsi->dsi_host.dev = dev;
 
 	dsi->dev = dev;
-	dsi->driver_data = of_device_get_match_data(dev);
+	dsi->plat_data = of_device_get_match_data(dev);
+	dsi->driver_data = exynos_dsi_types[dsi->plat_data->hw_type];
 
 	dsi->supplies[0].supply = "vddcore";
 	dsi->supplies[1].supply = "vddio";
@@ -1862,6 +1870,51 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
 				pm_runtime_force_resume)
 };
 
+static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS3250,
+};
+
+static const struct exynos_dsi_plat_data exynos4210_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS4210,
+};
+
+static const struct exynos_dsi_plat_data exynos5410_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5410,
+};
+
+static const struct exynos_dsi_plat_data exynos5422_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5422,
+};
+
+static const struct exynos_dsi_plat_data exynos5433_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5433,
+};
+
+static const struct of_device_id exynos_dsi_of_match[] = {
+	{
+		.compatible = "samsung,exynos3250-mipi-dsi",
+		.data = &exynos3250_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos4210-mipi-dsi",
+		.data = &exynos4210_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5410-mipi-dsi",
+		.data = &exynos5410_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5422-mipi-dsi",
+		.data = &exynos5422_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5433-mipi-dsi",
+		.data = &exynos5433_dsi_pdata,
+	},
+	{ /* sentinel. */ }
+};
+MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
+
 struct platform_driver dsi_driver = {
 	.probe = exynos_dsi_probe,
 	.remove = exynos_dsi_remove,
-- 
2.25.1

[PATCH v15 05/16] drm: exynos: dsi: Introduce hw_type platform data

[Jagan Teki]

Samsung MIPI DSIM controller is common DSI IP that can be used
in various SoCs like Exynos, i.MX8M Mini/Nano/Plus.

Add hw_type enum via platform_data so that accessing the different
controller data between various platforms becomes easy and meaningful.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- drop extra line
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"
- update enum type names

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 83 ++++++++++++++++++++-----
 1 file changed, 68 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 603fed107fd1..64cf69995750 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -254,6 +254,15 @@ struct exynos_dsi_transfer {
 #define DSIM_STATE_CMD_LPM		BIT(2)
 #define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
 
+enum exynos_dsi_type {
+	DSIM_TYPE_EXYNOS3250,
+	DSIM_TYPE_EXYNOS4210,
+	DSIM_TYPE_EXYNOS5410,
+	DSIM_TYPE_EXYNOS5422,
+	DSIM_TYPE_EXYNOS5433,
+	DSIM_TYPE_COUNT,
+};
+
 struct exynos_dsi_driver_data {
 	const unsigned int *reg_ofs;
 	unsigned int plltmr_reg;
@@ -267,6 +276,10 @@ struct exynos_dsi_driver_data {
 	const unsigned int *reg_values;
 };
 
+struct exynos_dsi_plat_data {
+	enum exynos_dsi_type hw_type;
+};
+
 struct exynos_dsi {
 	struct drm_encoder encoder;
 	struct mipi_dsi_host dsi_host;
@@ -297,6 +310,7 @@ struct exynos_dsi {
 	struct list_head transfer_list;
 
 	const struct exynos_dsi_driver_data *driver_data;
+	const struct exynos_dsi_plat_data *plat_data;
 };
 
 #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -524,18 +538,13 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
 	.reg_values = exynos5422_reg_values,
 };
 
-static const struct of_device_id exynos_dsi_of_match[] = {
-	{ .compatible = "samsung,exynos3250-mipi-dsi",
-	  .data = &exynos3_dsi_driver_data },
-	{ .compatible = "samsung,exynos4210-mipi-dsi",
-	  .data = &exynos4_dsi_driver_data },
-	{ .compatible = "samsung,exynos5410-mipi-dsi",
-	  .data = &exynos5_dsi_driver_data },
-	{ .compatible = "samsung,exynos5422-mipi-dsi",
-	  .data = &exynos5422_dsi_driver_data },
-	{ .compatible = "samsung,exynos5433-mipi-dsi",
-	  .data = &exynos5433_dsi_driver_data },
-	{ }
+static const struct exynos_dsi_driver_data *
+exynos_dsi_types[DSIM_TYPE_COUNT] = {
+	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS4210] = &exynos4_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
 };
 
 static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
@@ -1468,8 +1477,6 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.attach				= exynos_dsi_attach,
 };
 
-MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
-
 static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
@@ -1704,7 +1711,8 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	dsi->dsi_host.dev = dev;
 
 	dsi->dev = dev;
-	dsi->driver_data = of_device_get_match_data(dev);
+	dsi->plat_data = of_device_get_match_data(dev);
+	dsi->driver_data = exynos_dsi_types[dsi->plat_data->hw_type];
 
 	dsi->supplies[0].supply = "vddcore";
 	dsi->supplies[1].supply = "vddio";
@@ -1862,6 +1870,51 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
 				pm_runtime_force_resume)
 };
 
+static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS3250,
+};
+
+static const struct exynos_dsi_plat_data exynos4210_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS4210,
+};
+
+static const struct exynos_dsi_plat_data exynos5410_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5410,
+};
+
+static const struct exynos_dsi_plat_data exynos5422_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5422,
+};
+
+static const struct exynos_dsi_plat_data exynos5433_dsi_pdata = {
+	.hw_type = DSIM_TYPE_EXYNOS5433,
+};
+
+static const struct of_device_id exynos_dsi_of_match[] = {
+	{
+		.compatible = "samsung,exynos3250-mipi-dsi",
+		.data = &exynos3250_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos4210-mipi-dsi",
+		.data = &exynos4210_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5410-mipi-dsi",
+		.data = &exynos5410_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5422-mipi-dsi",
+		.data = &exynos5422_dsi_pdata,
+	},
+	{
+		.compatible = "samsung,exynos5433-mipi-dsi",
+		.data = &exynos5433_dsi_pdata,
+	},
+	{ /* sentinel. */ }
+};
+MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
+
 struct platform_driver dsi_driver = {
 	.probe = exynos_dsi_probe,
 	.remove = exynos_dsi_remove,
-- 
2.25.1

[PATCH v15 06/16] drm: exynos: dsi: Handle proper host initialization

[Jagan Teki]

From: Marek Szyprowski <m.szyprowski@samsung.com>

Host transfer() in the DSI master will invoke only when the DSI commands
are sent from DSI devices like DSI Panel or DSI bridges and this host
the transfer wouldn't invoke for I2C-based-DSI bridge drivers.

Handling DSI host initialization in transfer calls misses the controller
setup for I2C configured DSI bridges.

This patch updates the DSI host initialization by calling host to init
from bridge pre_enable as the bridge pre_enable API is invoked by core
as it is common across all classes of DSI device drivers.

The host init during pre_enable is conditional and not invoked for Exynos
as existing downstream drm panels and bridges in Exynos are expecting
the host initialization during DSI transfer.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none 
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
Changes for v10:
- update the to simple logic to handle all platforms
Changs for v9 - v8:
- none
Changes for v2:
- check initialized state in samsung_dsim_init
Changes for v1:
- keep DSI init in host transfer

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 27 +++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 64cf69995750..fe195d76ce76 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -254,6 +254,9 @@ struct exynos_dsi_transfer {
 #define DSIM_STATE_CMD_LPM		BIT(2)
 #define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
 
+#define exynos_dsi_hw_is_exynos(hw) \
+	((hw) >= DSIM_TYPE_EXYNOS3250 && (hw) <= DSIM_TYPE_EXYNOS5433)
+
 enum exynos_dsi_type {
 	DSIM_TYPE_EXYNOS3250,
 	DSIM_TYPE_EXYNOS4210,
@@ -1343,6 +1346,9 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 {
 	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
 
+	if (dsi->state & DSIM_STATE_INITIALIZED)
+		return 0;
+
 	exynos_dsi_reset(dsi);
 	exynos_dsi_enable_irq(dsi);
 
@@ -1355,6 +1361,8 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 	exynos_dsi_set_phy_ctrl(dsi);
 	exynos_dsi_init_link(dsi);
 
+	dsi->state |= DSIM_STATE_INITIALIZED;
+
 	return 0;
 }
 
@@ -1410,6 +1418,16 @@ static void exynos_dsi_atomic_pre_enable(struct drm_bridge *bridge,
 	}
 
 	dsi->state |= DSIM_STATE_ENABLED;
+
+	/*
+	 * For Exynos-DSIM the downstream bridge, or panel are expecting
+	 * the host initialization during DSI transfer.
+	 */
+	if (!exynos_dsi_hw_is_exynos(dsi->plat_data->hw_type)) {
+		ret = exynos_dsi_init(dsi);
+		if (ret)
+			return;
+	}
 }
 
 static void exynos_dsi_atomic_enable(struct drm_bridge *bridge,
@@ -1601,12 +1619,9 @@ static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
 	if (!(dsi->state & DSIM_STATE_ENABLED))
 		return -EINVAL;
 
-	if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
-		ret = exynos_dsi_init(dsi);
-		if (ret)
-			return ret;
-		dsi->state |= DSIM_STATE_INITIALIZED;
-	}
+	ret = exynos_dsi_init(dsi);
+	if (ret)
+		return ret;
 
 	ret = mipi_dsi_create_packet(&xfer.packet, msg);
 	if (ret < 0)
-- 
2.25.1

[PATCH v15 06/16] drm: exynos: dsi: Handle proper host initialization

[Jagan Teki]

From: Marek Szyprowski <m.szyprowski@samsung.com>

Host transfer() in the DSI master will invoke only when the DSI commands
are sent from DSI devices like DSI Panel or DSI bridges and this host
the transfer wouldn't invoke for I2C-based-DSI bridge drivers.

Handling DSI host initialization in transfer calls misses the controller
setup for I2C configured DSI bridges.

This patch updates the DSI host initialization by calling host to init
from bridge pre_enable as the bridge pre_enable API is invoked by core
as it is common across all classes of DSI device drivers.

The host init during pre_enable is conditional and not invoked for Exynos
as existing downstream drm panels and bridges in Exynos are expecting
the host initialization during DSI transfer.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none 
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
Changes for v10:
- update the to simple logic to handle all platforms
Changs for v9 - v8:
- none
Changes for v2:
- check initialized state in samsung_dsim_init
Changes for v1:
- keep DSI init in host transfer

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 27 +++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 64cf69995750..fe195d76ce76 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -254,6 +254,9 @@ struct exynos_dsi_transfer {
 #define DSIM_STATE_CMD_LPM		BIT(2)
 #define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
 
+#define exynos_dsi_hw_is_exynos(hw) \
+	((hw) >= DSIM_TYPE_EXYNOS3250 && (hw) <= DSIM_TYPE_EXYNOS5433)
+
 enum exynos_dsi_type {
 	DSIM_TYPE_EXYNOS3250,
 	DSIM_TYPE_EXYNOS4210,
@@ -1343,6 +1346,9 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 {
 	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
 
+	if (dsi->state & DSIM_STATE_INITIALIZED)
+		return 0;
+
 	exynos_dsi_reset(dsi);
 	exynos_dsi_enable_irq(dsi);
 
@@ -1355,6 +1361,8 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 	exynos_dsi_set_phy_ctrl(dsi);
 	exynos_dsi_init_link(dsi);
 
+	dsi->state |= DSIM_STATE_INITIALIZED;
+
 	return 0;
 }
 
@@ -1410,6 +1418,16 @@ static void exynos_dsi_atomic_pre_enable(struct drm_bridge *bridge,
 	}
 
 	dsi->state |= DSIM_STATE_ENABLED;
+
+	/*
+	 * For Exynos-DSIM the downstream bridge, or panel are expecting
+	 * the host initialization during DSI transfer.
+	 */
+	if (!exynos_dsi_hw_is_exynos(dsi->plat_data->hw_type)) {
+		ret = exynos_dsi_init(dsi);
+		if (ret)
+			return;
+	}
 }
 
 static void exynos_dsi_atomic_enable(struct drm_bridge *bridge,
@@ -1601,12 +1619,9 @@ static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
 	if (!(dsi->state & DSIM_STATE_ENABLED))
 		return -EINVAL;
 
-	if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
-		ret = exynos_dsi_init(dsi);
-		if (ret)
-			return ret;
-		dsi->state |= DSIM_STATE_INITIALIZED;
-	}
+	ret = exynos_dsi_init(dsi);
+	if (ret)
+		return ret;
 
 	ret = mipi_dsi_create_packet(&xfer.packet, msg);
 	if (ret < 0)
-- 
2.25.1

[PATCH v15 07/16] drm: exynos: dsi: Add atomic check

[Jagan Teki]

Look like an explicit fixing up of mode_flags is required for DSIM IP
present in i.MX8M Mini/Nano SoCs.

At least the LCDIF + DSIM needs active low sync polarities in order
to correlate the correct sync flags of the surrounding components in
the chain to make sure the whole pipeline can work properly.

On the other hand the i.MX 8M Mini Applications Processor Reference Manual,
Rev. 3, 11/2020 says.
"13.6.3.5.2 RGB interface
 Vsync, Hsync, and VDEN are active high signals."

i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
3.6.3.5.2 RGB interface
i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
13.6.2.7.2 RGB interface
both claim "Vsync, Hsync, and VDEN are active high signals.", the
LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.

No clear evidence about whether it can be documentation issues or
something, so added proper comments on the code.

Comments are suggested by Marek Vasut.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- fix commit message
Changes for v10, v9:
- none
Changes for v8:
- update the comments about sync signals polarities
- added clear commit message by including i.MX8M Nano details
Changes for v7:
- fix the hw_type checking logic
Changes for v6:
- none
Changes for v5:
- rebase based new bridge changes [mszyprow]
- remove DSIM_QUIRK_FIXUP_SYNC_POL
- add hw_type check for sync polarities change.
Changes for v4:
- none
Changes for v3:
- add DSIM_QUIRK_FIXUP_SYNC_POL to handle mode_flasg fixup
Changes for v2:
- none
Changes for v1:
- fix mode flags in atomic_check instead of mode_fixup

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 28 +++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index fe195d76ce76..796480e4a18b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -263,6 +263,7 @@ enum exynos_dsi_type {
 	DSIM_TYPE_EXYNOS5410,
 	DSIM_TYPE_EXYNOS5422,
 	DSIM_TYPE_EXYNOS5433,
+	DSIM_TYPE_IMX8MM,
 	DSIM_TYPE_COUNT,
 };
 
@@ -1465,6 +1466,32 @@ static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(dsi->dev);
 }
 
+static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
+				   struct drm_bridge_state *bridge_state,
+				   struct drm_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+	/*
+	 * The i.MX8M Mini/Nano glue logic between LCDIF and DSIM
+	 * inverts HS/VS/DE sync signals polarity, therefore, while
+	 * i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
+	 * 13.6.3.5.2 RGB interface
+	 * i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
+	 * 13.6.2.7.2 RGB interface
+	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
+	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+	 */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
+		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	}
+
+	return 0;
+}
+
 static void exynos_dsi_mode_set(struct drm_bridge *bridge,
 				const struct drm_display_mode *mode,
 				const struct drm_display_mode *adjusted_mode)
@@ -1487,6 +1514,7 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_check			= exynos_dsi_atomic_check,
 	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
 	.atomic_enable			= exynos_dsi_atomic_enable,
 	.atomic_disable			= exynos_dsi_atomic_disable,
-- 
2.25.1

[PATCH v15 07/16] drm: exynos: dsi: Add atomic check

[Jagan Teki]

Look like an explicit fixing up of mode_flags is required for DSIM IP
present in i.MX8M Mini/Nano SoCs.

At least the LCDIF + DSIM needs active low sync polarities in order
to correlate the correct sync flags of the surrounding components in
the chain to make sure the whole pipeline can work properly.

On the other hand the i.MX 8M Mini Applications Processor Reference Manual,
Rev. 3, 11/2020 says.
"13.6.3.5.2 RGB interface
 Vsync, Hsync, and VDEN are active high signals."

i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
3.6.3.5.2 RGB interface
i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
13.6.2.7.2 RGB interface
both claim "Vsync, Hsync, and VDEN are active high signals.", the
LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.

No clear evidence about whether it can be documentation issues or
something, so added proper comments on the code.

Comments are suggested by Marek Vasut.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- fix commit message
Changes for v10, v9:
- none
Changes for v8:
- update the comments about sync signals polarities
- added clear commit message by including i.MX8M Nano details
Changes for v7:
- fix the hw_type checking logic
Changes for v6:
- none
Changes for v5:
- rebase based new bridge changes [mszyprow]
- remove DSIM_QUIRK_FIXUP_SYNC_POL
- add hw_type check for sync polarities change.
Changes for v4:
- none
Changes for v3:
- add DSIM_QUIRK_FIXUP_SYNC_POL to handle mode_flasg fixup
Changes for v2:
- none
Changes for v1:
- fix mode flags in atomic_check instead of mode_fixup

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 28 +++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index fe195d76ce76..796480e4a18b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -263,6 +263,7 @@ enum exynos_dsi_type {
 	DSIM_TYPE_EXYNOS5410,
 	DSIM_TYPE_EXYNOS5422,
 	DSIM_TYPE_EXYNOS5433,
+	DSIM_TYPE_IMX8MM,
 	DSIM_TYPE_COUNT,
 };
 
@@ -1465,6 +1466,32 @@ static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(dsi->dev);
 }
 
+static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
+				   struct drm_bridge_state *bridge_state,
+				   struct drm_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+	/*
+	 * The i.MX8M Mini/Nano glue logic between LCDIF and DSIM
+	 * inverts HS/VS/DE sync signals polarity, therefore, while
+	 * i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
+	 * 13.6.3.5.2 RGB interface
+	 * i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
+	 * 13.6.2.7.2 RGB interface
+	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
+	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+	 */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
+		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	}
+
+	return 0;
+}
+
 static void exynos_dsi_mode_set(struct drm_bridge *bridge,
 				const struct drm_display_mode *mode,
 				const struct drm_display_mode *adjusted_mode)
@@ -1487,6 +1514,7 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_check			= exynos_dsi_atomic_check,
 	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
 	.atomic_enable			= exynos_dsi_atomic_enable,
 	.atomic_disable			= exynos_dsi_atomic_disable,
-- 
2.25.1

[PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Jagan Teki]

LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
active low (DE_LOW). This makes the valid data transfer on each
horizontal line.

So, add additional bus flags DE_LOW setting via input_bus_flags
for i.MX8M Mini/Nano platforms.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
Changes for v10, v9:
- none
Changes for v8:
- add DE_LOW for i.MX8M Mini/Nano platforms.
Changes for v7, v6:
- none
Changes for v5:
- rebased based on updated bridge changes
Changes for v4 - v1:
- none

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 796480e4a18b..5d971b607e1a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
+static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
 static int exynos_dsi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
 	dsi->bridge.pre_enable_prev_first = true;
 
+	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
+		dsi->bridge.timings = &dsim_bridge_timings_de_low;
+
 	ret = component_add(dev, &exynos_dsi_component_ops);
 	if (ret)
 		goto err_disable_runtime;
-- 
2.25.1

[PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Jagan Teki]

LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
active low (DE_LOW). This makes the valid data transfer on each
horizontal line.

So, add additional bus flags DE_LOW setting via input_bus_flags
for i.MX8M Mini/Nano platforms.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
Changes for v10, v9:
- none
Changes for v8:
- add DE_LOW for i.MX8M Mini/Nano platforms.
Changes for v7, v6:
- none
Changes for v5:
- rebased based on updated bridge changes
Changes for v4 - v1:
- none

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 796480e4a18b..5d971b607e1a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
+static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
 static int exynos_dsi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
 	dsi->bridge.pre_enable_prev_first = true;
 
+	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
+		dsi->bridge.timings = &dsim_bridge_timings_de_low;
+
 	ret = component_add(dev, &exynos_dsi_component_ops);
 	if (ret)
 		goto err_disable_runtime;
-- 
2.25.1

[PATCH v15 09/16] drm: exynos: dsi: Add atomic_get_input_bus_fmts

[Jagan Teki]

Finding the right input bus format throughout the pipeline is hard
so add atomic_get_input_bus_fmts callback and initialize with the
proper input format from list of supported output formats.

This format can be used in pipeline for negotiating bus format between
the DSI-end of this bridge and the other component closer to pipeline
components.

List of Pixel formats are taken from,
AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
3.7.4 Pixel formats
Table 14. DSI pixel packing formats

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- collect RB from Marek
Changes for v12:
- update the logic suggested by Marek
Changes for v11:
- collect RB from Frieder
- drop extra line
Changes for v10:
- none
Changes for v9:
- added MEDIA_BUS_FMT_FIXED
- return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
  list is unsupported.
- added MEDIA_BUS_FMT_YUYV10_1X20, MEDIA_BUS_FMT_YUYV12_1X24
Changes for v8:
- added pixel formats supported by NXP AN13573 i.MX 8/RT MIPI DSI/CSI-2
Changes for v7 - v4:
- none
Changes for v3:
- include media-bus-format.h
Changes for v2:
- none
Changes for v1:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5d971b607e1a..c8829f33f36e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -12,6 +12,7 @@
 #include <linux/component.h>
 #include <linux/gpio/consumer.h>
 #include <linux/irq.h>
+#include <linux/media-bus-format.h>
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
@@ -1466,6 +1467,66 @@ static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(dsi->dev);
 }
 
+/*
+ * This pixel output formats list referenced from,
+ * AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
+ * 3.7.4 Pixel formats
+ * Table 14. DSI pixel packing formats
+ */
+static const u32 exynos_dsi_pixel_output_fmts[] = {
+	MEDIA_BUS_FMT_YUYV10_1X20,
+	MEDIA_BUS_FMT_YUYV12_1X24,
+	MEDIA_BUS_FMT_UYVY8_1X16,
+	MEDIA_BUS_FMT_RGB101010_1X30,
+	MEDIA_BUS_FMT_RGB121212_1X36,
+	MEDIA_BUS_FMT_RGB565_1X16,
+	MEDIA_BUS_FMT_RGB666_1X18,
+	MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+static bool exynos_dsi_pixel_output_fmt_supported(u32 fmt)
+{
+	int i;
+
+	if (fmt == MEDIA_BUS_FMT_FIXED)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(exynos_dsi_pixel_output_fmts); i++) {
+		if (exynos_dsi_pixel_output_fmts[i] == fmt)
+			return true;
+	}
+
+	return false;
+}
+
+static u32 *
+exynos_dsi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				     struct drm_bridge_state *bridge_state,
+				     struct drm_crtc_state *crtc_state,
+				     struct drm_connector_state *conn_state,
+				     u32 output_fmt,
+				     unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	if (!exynos_dsi_pixel_output_fmt_supported(output_fmt))
+		/*
+		 * Some bridge/display drivers are still not able to pass the
+		 * correct format, so handle those pipelines by falling back
+		 * to the default format till the supported formats finalized.
+		 */
+		output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+	input_fmts[0] = output_fmt;
+	*num_input_fmts = 1;
+
+	return input_fmts;
+}
+
 static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
 				   struct drm_bridge_state *bridge_state,
 				   struct drm_crtc_state *crtc_state,
@@ -1514,6 +1575,7 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_get_input_bus_fmts	= exynos_dsi_atomic_get_input_bus_fmts,
 	.atomic_check			= exynos_dsi_atomic_check,
 	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
 	.atomic_enable			= exynos_dsi_atomic_enable,
-- 
2.25.1

[PATCH v15 09/16] drm: exynos: dsi: Add atomic_get_input_bus_fmts

[Jagan Teki]

Finding the right input bus format throughout the pipeline is hard
so add atomic_get_input_bus_fmts callback and initialize with the
proper input format from list of supported output formats.

This format can be used in pipeline for negotiating bus format between
the DSI-end of this bridge and the other component closer to pipeline
components.

List of Pixel formats are taken from,
AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
3.7.4 Pixel formats
Table 14. DSI pixel packing formats

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- collect RB from Marek
Changes for v12:
- update the logic suggested by Marek
Changes for v11:
- collect RB from Frieder
- drop extra line
Changes for v10:
- none
Changes for v9:
- added MEDIA_BUS_FMT_FIXED
- return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
  list is unsupported.
- added MEDIA_BUS_FMT_YUYV10_1X20, MEDIA_BUS_FMT_YUYV12_1X24
Changes for v8:
- added pixel formats supported by NXP AN13573 i.MX 8/RT MIPI DSI/CSI-2
Changes for v7 - v4:
- none
Changes for v3:
- include media-bus-format.h
Changes for v2:
- none
Changes for v1:
- new patch

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5d971b607e1a..c8829f33f36e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -12,6 +12,7 @@
 #include <linux/component.h>
 #include <linux/gpio/consumer.h>
 #include <linux/irq.h>
+#include <linux/media-bus-format.h>
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
@@ -1466,6 +1467,66 @@ static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(dsi->dev);
 }
 
+/*
+ * This pixel output formats list referenced from,
+ * AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
+ * 3.7.4 Pixel formats
+ * Table 14. DSI pixel packing formats
+ */
+static const u32 exynos_dsi_pixel_output_fmts[] = {
+	MEDIA_BUS_FMT_YUYV10_1X20,
+	MEDIA_BUS_FMT_YUYV12_1X24,
+	MEDIA_BUS_FMT_UYVY8_1X16,
+	MEDIA_BUS_FMT_RGB101010_1X30,
+	MEDIA_BUS_FMT_RGB121212_1X36,
+	MEDIA_BUS_FMT_RGB565_1X16,
+	MEDIA_BUS_FMT_RGB666_1X18,
+	MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+static bool exynos_dsi_pixel_output_fmt_supported(u32 fmt)
+{
+	int i;
+
+	if (fmt == MEDIA_BUS_FMT_FIXED)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(exynos_dsi_pixel_output_fmts); i++) {
+		if (exynos_dsi_pixel_output_fmts[i] == fmt)
+			return true;
+	}
+
+	return false;
+}
+
+static u32 *
+exynos_dsi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				     struct drm_bridge_state *bridge_state,
+				     struct drm_crtc_state *crtc_state,
+				     struct drm_connector_state *conn_state,
+				     u32 output_fmt,
+				     unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	if (!exynos_dsi_pixel_output_fmt_supported(output_fmt))
+		/*
+		 * Some bridge/display drivers are still not able to pass the
+		 * correct format, so handle those pipelines by falling back
+		 * to the default format till the supported formats finalized.
+		 */
+		output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+	input_fmts[0] = output_fmt;
+	*num_input_fmts = 1;
+
+	return input_fmts;
+}
+
 static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
 				   struct drm_bridge_state *bridge_state,
 				   struct drm_crtc_state *crtc_state,
@@ -1514,6 +1575,7 @@ static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
 	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_get_input_bus_fmts	= exynos_dsi_atomic_get_input_bus_fmts,
 	.atomic_check			= exynos_dsi_atomic_check,
 	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
 	.atomic_enable			= exynos_dsi_atomic_enable,
-- 
2.25.1

[PATCH v15 10/16] drm: exynos: dsi: Consolidate component and bridge

[Jagan Teki]

DSI host registration, attach and detach operations are quite
different for the component and bridge-based DRM drivers. 

Supporting generic bridge driver to use both component and bridge
based DRM drivers can be tricky and would require additional host
related operation hooks.

Add host operation hooks for registering and unregistering Exynos
and generic drivers, where Exynos hooks are used in existing Exynos
component based DRM drivers and generic hooks are used in i.MX8M
bridge based DRM drivers. 

Add host attach and detach operation hooks for Exynos component
DRM drivers and those get invoked while DSI core host attach and
detach gets called.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- remove leading  underscores in function names
Changes for v13:
- none
Changes for v12:
- fix unneeded decleration
- collect RB from Marek
Changes for v11:
- none
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 169 +++++++++++++++++++-----
 1 file changed, 134 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index c8829f33f36e..afe2d293c785 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -283,10 +283,10 @@ struct exynos_dsi_driver_data {
 
 struct exynos_dsi_plat_data {
 	enum exynos_dsi_type hw_type;
+	const struct exynos_dsim_host_ops *host_ops;
 };
 
 struct exynos_dsi {
-	struct drm_encoder encoder;
 	struct mipi_dsi_host dsi_host;
 	struct drm_bridge bridge;
 	struct drm_bridge *out_bridge;
@@ -316,6 +316,19 @@ struct exynos_dsi {
 
 	const struct exynos_dsi_driver_data *driver_data;
 	const struct exynos_dsi_plat_data *plat_data;
+
+	void *priv;
+};
+
+struct exynos_dsim_host_ops {
+	int (*register_host)(struct exynos_dsi *dsim);
+	void (*unregister_host)(struct exynos_dsi *dsim);
+	int (*attach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+	int (*detach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+};
+
+struct exynos_dsi_enc {
+	struct drm_encoder encoder;
 };
 
 #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -1320,7 +1333,8 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
 static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
 {
 	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
-	struct drm_encoder *encoder = &dsi->encoder;
+	struct exynos_dsi_enc *dsi_enc = dsi->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
 
 	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
 		exynos_drm_crtc_te_handler(encoder->crtc);
@@ -1589,9 +1603,8 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
 	struct device *dev = dsi->dev;
-	struct drm_encoder *encoder = &dsi->encoder;
-	struct drm_device *drm = encoder->dev;
 	struct device_node *np = dev->of_node;
 	struct device_node *remote;
 	struct drm_panel *panel;
@@ -1648,35 +1661,15 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 
 	drm_bridge_add(&dsi->bridge);
 
-	drm_bridge_attach(encoder, &dsi->bridge,
-			  list_first_entry_or_null(&encoder->bridge_chain,
-						   struct drm_bridge,
-						   chain_node), 0);
-
-	/*
-	 * This is a temporary solution and should be made by more generic way.
-	 *
-	 * If attached panel device is for command mode one, dsi should register
-	 * TE interrupt handler.
-	 */
-	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
-		ret = exynos_dsi_register_te_irq(dsi, &device->dev);
-		if (ret)
+	if (pdata->host_ops && pdata->host_ops->attach) {
+		ret = pdata->host_ops->attach(dsi, device);
+		if (ret < 0)
 			return ret;
 	}
 
-	mutex_lock(&drm->mode_config.mutex);
-
 	dsi->lanes = device->lanes;
 	dsi->format = device->format;
 	dsi->mode_flags = device->mode_flags;
-	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
-			!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
-
-	mutex_unlock(&drm->mode_config.mutex);
-
-	if (drm->mode_config.poll_enabled)
-		drm_kms_helper_hotplug_event(drm);
 
 	return 0;
 }
@@ -1685,14 +1678,16 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
-	struct drm_device *drm = dsi->encoder.dev;
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
+	int ret;
 
 	dsi->out_bridge = NULL;
 
-	if (drm->mode_config.poll_enabled)
-		drm_kms_helper_hotplug_event(drm);
-
-	exynos_dsi_unregister_te_irq(dsi);
+	if (pdata->host_ops && pdata->host_ops->detach) {
+		ret = pdata->host_ops->detach(dsi, device);
+		if (ret < 0)
+			return ret;
+	}
 
 	drm_bridge_remove(&dsi->bridge);
 
@@ -1766,11 +1761,67 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
 	return 0;
 }
 
+static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
+				   struct mipi_dsi_device *device)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
+	struct drm_device *drm = encoder->dev;
+	int ret;
+
+	drm_bridge_attach(encoder, &dsim->bridge,
+			  list_first_entry_or_null(&encoder->bridge_chain,
+						   struct drm_bridge,
+						   chain_node), 0);
+
+	/*
+	 * This is a temporary solution and should be made by more generic way.
+	 *
+	 * If attached panel device is for command mode one, dsi should register
+	 * TE interrupt handler.
+	 */
+	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
+		ret = exynos_dsi_register_te_irq(dsim, &device->dev);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&drm->mode_config.mutex);
+
+	dsim->lanes = device->lanes;
+	dsim->format = device->format;
+	dsim->mode_flags = device->mode_flags;
+	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
+			!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO);
+
+	mutex_unlock(&drm->mode_config.mutex);
+
+	if (drm->mode_config.poll_enabled)
+		drm_kms_helper_hotplug_event(drm);
+
+	return 0;
+}
+
+static int exynos_dsim_host_detach(struct exynos_dsi *dsim,
+				   struct mipi_dsi_device *device)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_device *drm = dsi_enc->encoder.dev;
+
+	if (drm->mode_config.poll_enabled)
+		drm_kms_helper_hotplug_event(drm);
+
+	exynos_dsi_unregister_te_irq(dsim);
+
+	return 0;
+}
+
 static int exynos_dsi_bind(struct device *dev, struct device *master,
 				void *data)
 {
 	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	struct drm_encoder *encoder = &dsi->encoder;
+	struct exynos_dsi_enc *dsi_enc = dsi->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
 	struct drm_device *drm_dev = data;
 	int ret;
 
@@ -1788,7 +1839,7 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master,
 {
 	struct exynos_dsi *dsi = dev_get_drvdata(dev);
 
-	exynos_dsi_atomic_disable(&dsi->bridge, NULL);
+	dsi->bridge.funcs->atomic_disable(&dsi->bridge, NULL);
 
 	mipi_dsi_host_unregister(&dsi->dsi_host);
 }
@@ -1798,6 +1849,40 @@ static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
+static int exynos_dsi_register_host(struct exynos_dsi *dsim)
+{
+	struct exynos_dsi_enc *dsi_enc;
+
+	dsi_enc = devm_kzalloc(dsim->dev, sizeof(*dsi_enc), GFP_KERNEL);
+	if (!dsi_enc)
+		return -ENOMEM;
+
+	dsim->priv = dsi_enc;
+	dsim->bridge.pre_enable_prev_first = true;
+
+	return component_add(dsim->dev, &exynos_dsi_component_ops);
+}
+
+static void exynos_dsi_unregister_host(struct exynos_dsi *dsim)
+{
+	component_del(dsim->dev, &exynos_dsi_component_ops);
+}
+
+static int generic_dsim_register_host(struct exynos_dsi *dsim)
+{
+	return mipi_dsi_host_register(&dsim->dsi_host);
+}
+
+static void generic_dsim_unregister_host(struct exynos_dsi *dsim)
+{
+	mipi_dsi_host_unregister(&dsim->dsi_host);
+}
+
+static const struct exynos_dsim_host_ops generic_dsim_host_ops = {
+	.register_host = generic_dsim_register_host,
+	.unregister_host = generic_dsim_unregister_host,
+};
+
 static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
 	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
 };
@@ -1892,7 +1977,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
 		dsi->bridge.timings = &dsim_bridge_timings_de_low;
 
-	ret = component_add(dev, &exynos_dsi_component_ops);
+	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
+		ret = dsi->plat_data->host_ops->register_host(dsi);
+
 	if (ret)
 		goto err_disable_runtime;
 
@@ -1983,24 +2070,36 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
 				pm_runtime_force_resume)
 };
 
+static const struct exynos_dsim_host_ops exynos_dsi_host_ops = {
+	.register_host = exynos_dsi_register_host,
+	.unregister_host = exynos_dsi_unregister_host,
+	.attach = exynos_dsim_host_attach,
+	.detach = exynos_dsim_host_detach,
+};
+
 static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS3250,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos4210_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS4210,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5410_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5410,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5422_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5422,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5433_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5433,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct of_device_id exynos_dsi_of_match[] = {
-- 
2.25.1

[PATCH v15 10/16] drm: exynos: dsi: Consolidate component and bridge

[Jagan Teki]

DSI host registration, attach and detach operations are quite
different for the component and bridge-based DRM drivers. 

Supporting generic bridge driver to use both component and bridge
based DRM drivers can be tricky and would require additional host
related operation hooks.

Add host operation hooks for registering and unregistering Exynos
and generic drivers, where Exynos hooks are used in existing Exynos
component based DRM drivers and generic hooks are used in i.MX8M
bridge based DRM drivers. 

Add host attach and detach operation hooks for Exynos component
DRM drivers and those get invoked while DSI core host attach and
detach gets called.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- remove leading  underscores in function names
Changes for v13:
- none
Changes for v12:
- fix unneeded decleration
- collect RB from Marek
Changes for v11:
- none
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 169 +++++++++++++++++++-----
 1 file changed, 134 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index c8829f33f36e..afe2d293c785 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -283,10 +283,10 @@ struct exynos_dsi_driver_data {
 
 struct exynos_dsi_plat_data {
 	enum exynos_dsi_type hw_type;
+	const struct exynos_dsim_host_ops *host_ops;
 };
 
 struct exynos_dsi {
-	struct drm_encoder encoder;
 	struct mipi_dsi_host dsi_host;
 	struct drm_bridge bridge;
 	struct drm_bridge *out_bridge;
@@ -316,6 +316,19 @@ struct exynos_dsi {
 
 	const struct exynos_dsi_driver_data *driver_data;
 	const struct exynos_dsi_plat_data *plat_data;
+
+	void *priv;
+};
+
+struct exynos_dsim_host_ops {
+	int (*register_host)(struct exynos_dsi *dsim);
+	void (*unregister_host)(struct exynos_dsi *dsim);
+	int (*attach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+	int (*detach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+};
+
+struct exynos_dsi_enc {
+	struct drm_encoder encoder;
 };
 
 #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -1320,7 +1333,8 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
 static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
 {
 	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
-	struct drm_encoder *encoder = &dsi->encoder;
+	struct exynos_dsi_enc *dsi_enc = dsi->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
 
 	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
 		exynos_drm_crtc_te_handler(encoder->crtc);
@@ -1589,9 +1603,8 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
 	struct device *dev = dsi->dev;
-	struct drm_encoder *encoder = &dsi->encoder;
-	struct drm_device *drm = encoder->dev;
 	struct device_node *np = dev->of_node;
 	struct device_node *remote;
 	struct drm_panel *panel;
@@ -1648,35 +1661,15 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 
 	drm_bridge_add(&dsi->bridge);
 
-	drm_bridge_attach(encoder, &dsi->bridge,
-			  list_first_entry_or_null(&encoder->bridge_chain,
-						   struct drm_bridge,
-						   chain_node), 0);
-
-	/*
-	 * This is a temporary solution and should be made by more generic way.
-	 *
-	 * If attached panel device is for command mode one, dsi should register
-	 * TE interrupt handler.
-	 */
-	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
-		ret = exynos_dsi_register_te_irq(dsi, &device->dev);
-		if (ret)
+	if (pdata->host_ops && pdata->host_ops->attach) {
+		ret = pdata->host_ops->attach(dsi, device);
+		if (ret < 0)
 			return ret;
 	}
 
-	mutex_lock(&drm->mode_config.mutex);
-
 	dsi->lanes = device->lanes;
 	dsi->format = device->format;
 	dsi->mode_flags = device->mode_flags;
-	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
-			!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
-
-	mutex_unlock(&drm->mode_config.mutex);
-
-	if (drm->mode_config.poll_enabled)
-		drm_kms_helper_hotplug_event(drm);
 
 	return 0;
 }
@@ -1685,14 +1678,16 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
 				  struct mipi_dsi_device *device)
 {
 	struct exynos_dsi *dsi = host_to_dsi(host);
-	struct drm_device *drm = dsi->encoder.dev;
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
+	int ret;
 
 	dsi->out_bridge = NULL;
 
-	if (drm->mode_config.poll_enabled)
-		drm_kms_helper_hotplug_event(drm);
-
-	exynos_dsi_unregister_te_irq(dsi);
+	if (pdata->host_ops && pdata->host_ops->detach) {
+		ret = pdata->host_ops->detach(dsi, device);
+		if (ret < 0)
+			return ret;
+	}
 
 	drm_bridge_remove(&dsi->bridge);
 
@@ -1766,11 +1761,67 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
 	return 0;
 }
 
+static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
+				   struct mipi_dsi_device *device)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
+	struct drm_device *drm = encoder->dev;
+	int ret;
+
+	drm_bridge_attach(encoder, &dsim->bridge,
+			  list_first_entry_or_null(&encoder->bridge_chain,
+						   struct drm_bridge,
+						   chain_node), 0);
+
+	/*
+	 * This is a temporary solution and should be made by more generic way.
+	 *
+	 * If attached panel device is for command mode one, dsi should register
+	 * TE interrupt handler.
+	 */
+	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
+		ret = exynos_dsi_register_te_irq(dsim, &device->dev);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&drm->mode_config.mutex);
+
+	dsim->lanes = device->lanes;
+	dsim->format = device->format;
+	dsim->mode_flags = device->mode_flags;
+	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
+			!(dsim->mode_flags & MIPI_DSI_MODE_VIDEO);
+
+	mutex_unlock(&drm->mode_config.mutex);
+
+	if (drm->mode_config.poll_enabled)
+		drm_kms_helper_hotplug_event(drm);
+
+	return 0;
+}
+
+static int exynos_dsim_host_detach(struct exynos_dsi *dsim,
+				   struct mipi_dsi_device *device)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_device *drm = dsi_enc->encoder.dev;
+
+	if (drm->mode_config.poll_enabled)
+		drm_kms_helper_hotplug_event(drm);
+
+	exynos_dsi_unregister_te_irq(dsim);
+
+	return 0;
+}
+
 static int exynos_dsi_bind(struct device *dev, struct device *master,
 				void *data)
 {
 	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	struct drm_encoder *encoder = &dsi->encoder;
+	struct exynos_dsi_enc *dsi_enc = dsi->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
 	struct drm_device *drm_dev = data;
 	int ret;
 
@@ -1788,7 +1839,7 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master,
 {
 	struct exynos_dsi *dsi = dev_get_drvdata(dev);
 
-	exynos_dsi_atomic_disable(&dsi->bridge, NULL);
+	dsi->bridge.funcs->atomic_disable(&dsi->bridge, NULL);
 
 	mipi_dsi_host_unregister(&dsi->dsi_host);
 }
@@ -1798,6 +1849,40 @@ static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
+static int exynos_dsi_register_host(struct exynos_dsi *dsim)
+{
+	struct exynos_dsi_enc *dsi_enc;
+
+	dsi_enc = devm_kzalloc(dsim->dev, sizeof(*dsi_enc), GFP_KERNEL);
+	if (!dsi_enc)
+		return -ENOMEM;
+
+	dsim->priv = dsi_enc;
+	dsim->bridge.pre_enable_prev_first = true;
+
+	return component_add(dsim->dev, &exynos_dsi_component_ops);
+}
+
+static void exynos_dsi_unregister_host(struct exynos_dsi *dsim)
+{
+	component_del(dsim->dev, &exynos_dsi_component_ops);
+}
+
+static int generic_dsim_register_host(struct exynos_dsi *dsim)
+{
+	return mipi_dsi_host_register(&dsim->dsi_host);
+}
+
+static void generic_dsim_unregister_host(struct exynos_dsi *dsim)
+{
+	mipi_dsi_host_unregister(&dsim->dsi_host);
+}
+
+static const struct exynos_dsim_host_ops generic_dsim_host_ops = {
+	.register_host = generic_dsim_register_host,
+	.unregister_host = generic_dsim_unregister_host,
+};
+
 static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
 	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
 };
@@ -1892,7 +1977,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
 		dsi->bridge.timings = &dsim_bridge_timings_de_low;
 
-	ret = component_add(dev, &exynos_dsi_component_ops);
+	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
+		ret = dsi->plat_data->host_ops->register_host(dsi);
+
 	if (ret)
 		goto err_disable_runtime;
 
@@ -1983,24 +2070,36 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
 				pm_runtime_force_resume)
 };
 
+static const struct exynos_dsim_host_ops exynos_dsi_host_ops = {
+	.register_host = exynos_dsi_register_host,
+	.unregister_host = exynos_dsi_unregister_host,
+	.attach = exynos_dsim_host_attach,
+	.detach = exynos_dsim_host_detach,
+};
+
 static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS3250,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos4210_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS4210,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5410_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5410,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5422_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5422,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct exynos_dsi_plat_data exynos5433_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5433,
+	.host_ops = &exynos_dsi_host_ops,
 };
 
 static const struct of_device_id exynos_dsi_of_match[] = {
-- 
2.25.1

[PATCH v15 11/16] drm: exynos: dsi: Add host helper for te_irq_handler

[Jagan Teki]

IRQ handler for te-gpio seems to be common across DSIM host.

However, Exynos is handling this via CRTC drivers but there is no clear
evidence on how the same has been handled in i.MX8MM. Keeping the handler
as-it-is can be a viable option but adding DSIM bridge core in upcoming
patches is not possible to call Exynos CRTC handler as DSIM bridge has
to be common across DRM bridge core instead of platform specific DRM
drivers like Exynos here.

So, this patch handles the handler via platform host helper, so-that
handling platform specific hook across Exynos and generic can be
reasonable till it makes it generic across all platforms.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- remove leading  underscores in function names
- collect RB from Marek
Changes for v13:
- none
Changes for v12:
- updated patch
- suggested by Marek V
Changes for v11:
- none
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index afe2d293c785..2fc166ebe3c7 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -325,6 +325,7 @@ struct exynos_dsim_host_ops {
 	void (*unregister_host)(struct exynos_dsi *dsim);
 	int (*attach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
 	int (*detach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+	irqreturn_t (*te_irq_handler)(struct exynos_dsi *dsim);
 };
 
 struct exynos_dsi_enc {
@@ -1333,11 +1334,10 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
 static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
 {
 	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
-	struct exynos_dsi_enc *dsi_enc = dsi->priv;
-	struct drm_encoder *encoder = &dsi_enc->encoder;
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
 
-	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
-		exynos_drm_crtc_te_handler(encoder->crtc);
+	if (pdata->host_ops && pdata->host_ops->te_irq_handler)
+		return pdata->host_ops->te_irq_handler(dsi);
 
 	return IRQ_HANDLED;
 }
@@ -1761,6 +1761,17 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
 	return 0;
 }
 
+static irqreturn_t exynos_dsim_te_irq_handler(struct exynos_dsi *dsim)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
+
+	if (dsim->state & DSIM_STATE_VIDOUT_AVAILABLE)
+		exynos_drm_crtc_te_handler(encoder->crtc);
+
+	return IRQ_HANDLED;
+}
+
 static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
 				   struct mipi_dsi_device *device)
 {
@@ -2075,6 +2086,7 @@ static const struct exynos_dsim_host_ops exynos_dsi_host_ops = {
 	.unregister_host = exynos_dsi_unregister_host,
 	.attach = exynos_dsim_host_attach,
 	.detach = exynos_dsim_host_detach,
+	.te_irq_handler = exynos_dsim_te_irq_handler,
 };
 
 static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
-- 
2.25.1

[PATCH v15 11/16] drm: exynos: dsi: Add host helper for te_irq_handler

[Jagan Teki]

IRQ handler for te-gpio seems to be common across DSIM host.

However, Exynos is handling this via CRTC drivers but there is no clear
evidence on how the same has been handled in i.MX8MM. Keeping the handler
as-it-is can be a viable option but adding DSIM bridge core in upcoming
patches is not possible to call Exynos CRTC handler as DSIM bridge has
to be common across DRM bridge core instead of platform specific DRM
drivers like Exynos here.

So, this patch handles the handler via platform host helper, so-that
handling platform specific hook across Exynos and generic can be
reasonable till it makes it generic across all platforms.

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- remove leading  underscores in function names
- collect RB from Marek
Changes for v13:
- none
Changes for v12:
- updated patch
- suggested by Marek V
Changes for v11:
- none
Changes for v10:
- split from previous series patch
"drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge"

 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index afe2d293c785..2fc166ebe3c7 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -325,6 +325,7 @@ struct exynos_dsim_host_ops {
 	void (*unregister_host)(struct exynos_dsi *dsim);
 	int (*attach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
 	int (*detach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
+	irqreturn_t (*te_irq_handler)(struct exynos_dsi *dsim);
 };
 
 struct exynos_dsi_enc {
@@ -1333,11 +1334,10 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
 static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
 {
 	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
-	struct exynos_dsi_enc *dsi_enc = dsi->priv;
-	struct drm_encoder *encoder = &dsi_enc->encoder;
+	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
 
-	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
-		exynos_drm_crtc_te_handler(encoder->crtc);
+	if (pdata->host_ops && pdata->host_ops->te_irq_handler)
+		return pdata->host_ops->te_irq_handler(dsi);
 
 	return IRQ_HANDLED;
 }
@@ -1761,6 +1761,17 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
 	return 0;
 }
 
+static irqreturn_t exynos_dsim_te_irq_handler(struct exynos_dsi *dsim)
+{
+	struct exynos_dsi_enc *dsi_enc = dsim->priv;
+	struct drm_encoder *encoder = &dsi_enc->encoder;
+
+	if (dsim->state & DSIM_STATE_VIDOUT_AVAILABLE)
+		exynos_drm_crtc_te_handler(encoder->crtc);
+
+	return IRQ_HANDLED;
+}
+
 static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
 				   struct mipi_dsi_device *device)
 {
@@ -2075,6 +2086,7 @@ static const struct exynos_dsim_host_ops exynos_dsi_host_ops = {
 	.unregister_host = exynos_dsi_unregister_host,
 	.attach = exynos_dsim_host_attach,
 	.detach = exynos_dsim_host_detach,
+	.te_irq_handler = exynos_dsim_te_irq_handler,
 };
 
 static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
-- 
2.25.1

[PATCH v15 12/16] drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge

[Jagan Teki]

Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.

In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.

We already have a consolidated code for supporting component and bridge
based DRM drivers, so keep the exynos component based code in existing
exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15:
- drop redundent 
  dsim->bridge.funcs->atomic_disable(&dsim->bridge, NULL);
Changes for v13:
- none
Changes for v11:
- sort MAINTAINERS list
- collect RB from Marek
Changes for v11:
- fix BIT macro replacements
- fix checkpatch --strict warnings
Changes for v10:
- don't add new code
- move the files and update samsung_dsim names
- update commit message
Changes for v9:
- drop the bridge attach fix for Exynos
Changes for v8:
- update the commit message head
Changes for v7:
- fix the drm bridge attach chain for exynos drm dsi driver
- fix the hw_type checking logic
Changes for v6:
- handle previous bridge pointer for exynos dsi
Changes for v5:
- [mszyprow] reworked driver initialization using the same approach as in
  drivers/gpu/drm/{exynos/exynos_dp.c, bridge/analogix/analogix_dp_core.c},
  removed weak functions, moved exynos_dsi_driver back to exynos_drm_dsi.c
  and restored integration with exynos_drm custom initialization.
- updated the commit message [Jagan]
Changes for v4:
- include Inki Dae in MAINTAINERS
- remove dsi_driver probe in exynos_drm_drv to support multi-arch build
Changes for v3:
- restore gpio related fixes
- restore proper bridge chain
- rework initialization issue
- fix header includes in proper way
Changes for v2:
- fixed exynos dsi driver conversion (Marek Szyprowski)
- updated commit message
- updated MAINTAINERS file
Changes for v1:
- don't maintain component_ops in bridge driver
- don't maintain platform glue code in bridge driver
- add platform-specific glue code and make a common bridge

 MAINTAINERS                             |    9 +
 drivers/gpu/drm/bridge/Kconfig          |   12 +
 drivers/gpu/drm/bridge/Makefile         |    1 +
 drivers/gpu/drm/bridge/samsung-dsim.c   | 1898 +++++++++++++++++++++
 drivers/gpu/drm/exynos/Kconfig          |    1 +
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2051 +----------------------
 include/drm/bridge/samsung-dsim.h       |  114 ++
 7 files changed, 2079 insertions(+), 2007 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
 create mode 100644 include/drm/bridge/samsung-dsim.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 97d814a19475..f604c36b31bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6737,6 +6737,15 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
 F:	drivers/gpu/drm/panel/panel-samsung-db7430.c
 
+DRM DRIVER FOR SAMSUNG MIPI DSIM BRIDGE
+M:	Inki Dae <inki.dae@samsung.com>
+M:	Jagan Teki <jagan@amarulasolutions.com>
+M:	Marek Szyprowski <m.szyprowski@samsung.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/bridge/samsung-dsim.c
+F:	include/drm/bridge/samsung-dsim.h
+
 DRM DRIVER FOR SAMSUNG S6D27A1 PANELS
 M:	Markuss Broks <markuss.broks@gmail.com>
 S:	Maintained
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8b2226f72b24..e9d00bcf2d5c 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -220,6 +220,18 @@ config DRM_PARADE_PS8640
 	  The PS8640 is a high-performance and low-power
 	  MIPI DSI to eDP converter
 
+config DRM_SAMSUNG_DSIM
+	tristate "Samsung MIPI DSIM bridge driver"
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	help
+	  The Samsung MIPI DSIM bridge controller driver.
+	  This MIPI DSIM bridge can be found it on Exynos SoCs and
+	  NXP's i.MX8M Mini/Nano.
+
 config DRM_SIL_SII8620
 	tristate "Silicon Image SII8620 HDMI/MHL bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 52f6e8b4a821..2b892b7ed59e 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
+obj-$(CONFIG_DRM_SAMSUNG_DSIM) += samsung-dsim.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
new file mode 100644
index 000000000000..42e3536cb2fc
--- /dev/null
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -0,0 +1,1898 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung MIPI DSIM bridge driver.
+ *
+ * Copyright (C) 2021 Amarula Solutions(India)
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * Based on exynos_drm_dsi from
+ * Tomasz Figa <t.figa@samsung.com>
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/media-bus-format.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/samsung-dsim.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+/* returns true iff both arguments logically differs */
+#define NEQV(a, b) (!(a) ^ !(b))
+
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK		BIT(8)
+#define DSIM_TX_READY_HS_CLK		BIT(10)
+#define DSIM_PLL_STABLE			BIT(31)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST			BIT(16)
+#define DSIM_SWRST			BIT(0)
+
+/* DSIM_TIMEOUT */
+#define DSIM_LPDR_TIMEOUT(x)		((x) << 0)
+#define DSIM_BTA_TIMEOUT(x)		((x) << 16)
+
+/* DSIM_CLKCTRL */
+#define DSIM_ESC_PRESCALER(x)		(((x) & 0xffff) << 0)
+#define DSIM_ESC_PRESCALER_MASK		(0xffff << 0)
+#define DSIM_LANE_ESC_CLK_EN_CLK	BIT(19)
+#define DSIM_LANE_ESC_CLK_EN_DATA(x)	(((x) & 0xf) << 20)
+#define DSIM_LANE_ESC_CLK_EN_DATA_MASK	(0xf << 20)
+#define DSIM_BYTE_CLKEN			BIT(24)
+#define DSIM_BYTE_CLK_SRC(x)		(((x) & 0x3) << 25)
+#define DSIM_BYTE_CLK_SRC_MASK		(0x3 << 25)
+#define DSIM_PLL_BYPASS			BIT(27)
+#define DSIM_ESC_CLKEN			BIT(28)
+#define DSIM_TX_REQUEST_HSCLK		BIT(31)
+
+/* DSIM_CONFIG */
+#define DSIM_LANE_EN_CLK		BIT(0)
+#define DSIM_LANE_EN(x)			(((x) & 0xf) << 1)
+#define DSIM_NUM_OF_DATA_LANE(x)	(((x) & 0x3) << 5)
+#define DSIM_SUB_PIX_FORMAT(x)		(((x) & 0x7) << 8)
+#define DSIM_MAIN_PIX_FORMAT_MASK	(0x7 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB888	(0x7 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB666	(0x6 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB666_P	(0x5 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB565	(0x4 << 12)
+#define DSIM_SUB_VC			(((x) & 0x3) << 16)
+#define DSIM_MAIN_VC			(((x) & 0x3) << 18)
+#define DSIM_HSA_DISABLE_MODE		BIT(20)
+#define DSIM_HBP_DISABLE_MODE		BIT(21)
+#define DSIM_HFP_DISABLE_MODE		BIT(22)
+/*
+ * The i.MX 8M Mini Applications Processor Reference Manual,
+ * Rev. 3, 11/2020 Page 4091
+ * The i.MX 8M Nano Applications Processor Reference Manual,
+ * Rev. 2, 07/2022 Page 3058
+ * The i.MX 8M Plus Applications Processor Reference Manual,
+ * Rev. 1, 06/2021 Page 5436
+ * all claims this bit is 'HseDisableMode' with the definition
+ * 0 = Disables transfer
+ * 1 = Enables transfer
+ *
+ * This clearly states that HSE is not a disabled bit.
+ *
+ * The naming convention follows as per the manual and the
+ * driver logic is based on the MIPI_DSI_MODE_VIDEO_HSE flag.
+ */
+#define DSIM_HSE_DISABLE_MODE		BIT(23)
+#define DSIM_AUTO_MODE			BIT(24)
+#define DSIM_VIDEO_MODE			BIT(25)
+#define DSIM_BURST_MODE			BIT(26)
+#define DSIM_SYNC_INFORM		BIT(27)
+#define DSIM_EOT_DISABLE		BIT(28)
+#define DSIM_MFLUSH_VS			BIT(29)
+/* This flag is valid only for exynos3250/3472/5260/5430 */
+#define DSIM_CLKLANE_STOP		BIT(30)
+
+/* DSIM_ESCMODE */
+#define DSIM_TX_TRIGGER_RST		BIT(4)
+#define DSIM_TX_LPDT_LP			BIT(6)
+#define DSIM_CMD_LPDT_LP		BIT(7)
+#define DSIM_FORCE_BTA			BIT(16)
+#define DSIM_FORCE_STOP_STATE		BIT(20)
+#define DSIM_STOP_STATE_CNT(x)		(((x) & 0x7ff) << 21)
+#define DSIM_STOP_STATE_CNT_MASK	(0x7ff << 21)
+
+/* DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY		BIT(31)
+#define DSIM_MAIN_VRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 16)
+#define DSIM_MAIN_HRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 0)
+
+/* DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW(x)		((x) << 28)
+#define DSIM_STABLE_VFP(x)		((x) << 16)
+#define DSIM_MAIN_VBP(x)		((x) << 0)
+#define DSIM_CMD_ALLOW_MASK		(0xf << 28)
+#define DSIM_STABLE_VFP_MASK		(0x7ff << 16)
+#define DSIM_MAIN_VBP_MASK		(0x7ff << 0)
+
+/* DSIM_MHPORCH */
+#define DSIM_MAIN_HFP(x)		((x) << 16)
+#define DSIM_MAIN_HBP(x)		((x) << 0)
+#define DSIM_MAIN_HFP_MASK		((0xffff) << 16)
+#define DSIM_MAIN_HBP_MASK		((0xffff) << 0)
+
+/* DSIM_MSYNC */
+#define DSIM_MAIN_VSA(x)		((x) << 22)
+#define DSIM_MAIN_HSA(x)		((x) << 0)
+#define DSIM_MAIN_VSA_MASK		((0x3ff) << 22)
+#define DSIM_MAIN_HSA_MASK		((0xffff) << 0)
+
+/* DSIM_SDRESOL */
+#define DSIM_SUB_STANDY(x)		((x) << 31)
+#define DSIM_SUB_VRESOL(x)		((x) << 16)
+#define DSIM_SUB_HRESOL(x)		((x) << 0)
+#define DSIM_SUB_STANDY_MASK		((0x1) << 31)
+#define DSIM_SUB_VRESOL_MASK		((0x7ff) << 16)
+#define DSIM_SUB_HRESOL_MASK		((0x7ff) << 0)
+
+/* DSIM_INTSRC */
+#define DSIM_INT_PLL_STABLE		BIT(31)
+#define DSIM_INT_SW_RST_RELEASE		BIT(30)
+#define DSIM_INT_SFR_FIFO_EMPTY		BIT(29)
+#define DSIM_INT_SFR_HDR_FIFO_EMPTY	BIT(28)
+#define DSIM_INT_BTA			BIT(25)
+#define DSIM_INT_FRAME_DONE		BIT(24)
+#define DSIM_INT_RX_TIMEOUT		BIT(21)
+#define DSIM_INT_BTA_TIMEOUT		BIT(20)
+#define DSIM_INT_RX_DONE		BIT(18)
+#define DSIM_INT_RX_TE			BIT(17)
+#define DSIM_INT_RX_ACK			BIT(16)
+#define DSIM_INT_RX_ECC_ERR		BIT(15)
+#define DSIM_INT_RX_CRC_ERR		BIT(14)
+
+/* DSIM_FIFOCTRL */
+#define DSIM_RX_DATA_FULL		BIT(25)
+#define DSIM_RX_DATA_EMPTY		BIT(24)
+#define DSIM_SFR_HEADER_FULL		BIT(23)
+#define DSIM_SFR_HEADER_EMPTY		BIT(22)
+#define DSIM_SFR_PAYLOAD_FULL		BIT(21)
+#define DSIM_SFR_PAYLOAD_EMPTY		BIT(20)
+#define DSIM_I80_HEADER_FULL		BIT(19)
+#define DSIM_I80_HEADER_EMPTY		BIT(18)
+#define DSIM_I80_PAYLOAD_FULL		BIT(17)
+#define DSIM_I80_PAYLOAD_EMPTY		BIT(16)
+#define DSIM_SD_HEADER_FULL		BIT(15)
+#define DSIM_SD_HEADER_EMPTY		BIT(14)
+#define DSIM_SD_PAYLOAD_FULL		BIT(13)
+#define DSIM_SD_PAYLOAD_EMPTY		BIT(12)
+#define DSIM_MD_HEADER_FULL		BIT(11)
+#define DSIM_MD_HEADER_EMPTY		BIT(10)
+#define DSIM_MD_PAYLOAD_FULL		BIT(9)
+#define DSIM_MD_PAYLOAD_EMPTY		BIT(8)
+#define DSIM_RX_FIFO			BIT(4)
+#define DSIM_SFR_FIFO			BIT(3)
+#define DSIM_I80_FIFO			BIT(2)
+#define DSIM_SD_FIFO			BIT(1)
+#define DSIM_MD_FIFO			BIT(0)
+
+/* DSIM_PHYACCHR */
+#define DSIM_AFC_EN			BIT(14)
+#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
+
+/* DSIM_PLLCTRL */
+#define DSIM_FREQ_BAND(x)		((x) << 24)
+#define DSIM_PLL_EN			BIT(23)
+#define DSIM_PLL_P(x, offset)		((x) << (offset))
+#define DSIM_PLL_M(x)			((x) << 4)
+#define DSIM_PLL_S(x)			((x) << 1)
+
+/* DSIM_PHYCTRL */
+#define DSIM_PHYCTRL_ULPS_EXIT(x)	(((x) & 0x1ff) << 0)
+#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP	BIT(30)
+#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP	BIT(14)
+
+/* DSIM_PHYTIMING */
+#define DSIM_PHYTIMING_LPX(x)		((x) << 8)
+#define DSIM_PHYTIMING_HS_EXIT(x)	((x) << 0)
+
+/* DSIM_PHYTIMING1 */
+#define DSIM_PHYTIMING1_CLK_PREPARE(x)	((x) << 24)
+#define DSIM_PHYTIMING1_CLK_ZERO(x)	((x) << 16)
+#define DSIM_PHYTIMING1_CLK_POST(x)	((x) << 8)
+#define DSIM_PHYTIMING1_CLK_TRAIL(x)	((x) << 0)
+
+/* DSIM_PHYTIMING2 */
+#define DSIM_PHYTIMING2_HS_PREPARE(x)	((x) << 16)
+#define DSIM_PHYTIMING2_HS_ZERO(x)	((x) << 8)
+#define DSIM_PHYTIMING2_HS_TRAIL(x)	((x) << 0)
+
+#define DSI_MAX_BUS_WIDTH		4
+#define DSI_NUM_VIRTUAL_CHANNELS	4
+#define DSI_TX_FIFO_SIZE		2048
+#define DSI_RX_FIFO_SIZE		256
+#define DSI_XFER_TIMEOUT_MS		100
+#define DSI_RX_FIFO_EMPTY		0x30800002
+
+#define OLD_SCLK_MIPI_CLK_NAME		"pll_clk"
+
+static const char *const clk_names[5] = {
+	"bus_clk",
+	"sclk_mipi",
+	"phyclk_mipidphy0_bitclkdiv8",
+	"phyclk_mipidphy0_rxclkesc0",
+	"sclk_rgb_vclk_to_dsim0"
+};
+
+enum samsung_dsim_transfer_type {
+	EXYNOS_DSI_TX,
+	EXYNOS_DSI_RX,
+};
+
+enum reg_idx {
+	DSIM_STATUS_REG,	/* Status register */
+	DSIM_SWRST_REG,		/* Software reset register */
+	DSIM_CLKCTRL_REG,	/* Clock control register */
+	DSIM_TIMEOUT_REG,	/* Time out register */
+	DSIM_CONFIG_REG,	/* Configuration register */
+	DSIM_ESCMODE_REG,	/* Escape mode register */
+	DSIM_MDRESOL_REG,
+	DSIM_MVPORCH_REG,	/* Main display Vporch register */
+	DSIM_MHPORCH_REG,	/* Main display Hporch register */
+	DSIM_MSYNC_REG,		/* Main display sync area register */
+	DSIM_INTSRC_REG,	/* Interrupt source register */
+	DSIM_INTMSK_REG,	/* Interrupt mask register */
+	DSIM_PKTHDR_REG,	/* Packet Header FIFO register */
+	DSIM_PAYLOAD_REG,	/* Payload FIFO register */
+	DSIM_RXFIFO_REG,	/* Read FIFO register */
+	DSIM_FIFOCTRL_REG,	/* FIFO status and control register */
+	DSIM_PLLCTRL_REG,	/* PLL control register */
+	DSIM_PHYCTRL_REG,
+	DSIM_PHYTIMING_REG,
+	DSIM_PHYTIMING1_REG,
+	DSIM_PHYTIMING2_REG,
+	NUM_REGS
+};
+
+static const unsigned int exynos_reg_ofs[] = {
+	[DSIM_STATUS_REG] =  0x00,
+	[DSIM_SWRST_REG] =  0x04,
+	[DSIM_CLKCTRL_REG] =  0x08,
+	[DSIM_TIMEOUT_REG] =  0x0c,
+	[DSIM_CONFIG_REG] =  0x10,
+	[DSIM_ESCMODE_REG] =  0x14,
+	[DSIM_MDRESOL_REG] =  0x18,
+	[DSIM_MVPORCH_REG] =  0x1c,
+	[DSIM_MHPORCH_REG] =  0x20,
+	[DSIM_MSYNC_REG] =  0x24,
+	[DSIM_INTSRC_REG] =  0x2c,
+	[DSIM_INTMSK_REG] =  0x30,
+	[DSIM_PKTHDR_REG] =  0x34,
+	[DSIM_PAYLOAD_REG] =  0x38,
+	[DSIM_RXFIFO_REG] =  0x3c,
+	[DSIM_FIFOCTRL_REG] =  0x44,
+	[DSIM_PLLCTRL_REG] =  0x4c,
+	[DSIM_PHYCTRL_REG] =  0x5c,
+	[DSIM_PHYTIMING_REG] =  0x64,
+	[DSIM_PHYTIMING1_REG] =  0x68,
+	[DSIM_PHYTIMING2_REG] =  0x6c,
+};
+
+static const unsigned int exynos5433_reg_ofs[] = {
+	[DSIM_STATUS_REG] = 0x04,
+	[DSIM_SWRST_REG] = 0x0C,
+	[DSIM_CLKCTRL_REG] = 0x10,
+	[DSIM_TIMEOUT_REG] = 0x14,
+	[DSIM_CONFIG_REG] = 0x18,
+	[DSIM_ESCMODE_REG] = 0x1C,
+	[DSIM_MDRESOL_REG] = 0x20,
+	[DSIM_MVPORCH_REG] = 0x24,
+	[DSIM_MHPORCH_REG] = 0x28,
+	[DSIM_MSYNC_REG] = 0x2C,
+	[DSIM_INTSRC_REG] = 0x34,
+	[DSIM_INTMSK_REG] = 0x38,
+	[DSIM_PKTHDR_REG] = 0x3C,
+	[DSIM_PAYLOAD_REG] = 0x40,
+	[DSIM_RXFIFO_REG] = 0x44,
+	[DSIM_FIFOCTRL_REG] = 0x4C,
+	[DSIM_PLLCTRL_REG] = 0x94,
+	[DSIM_PHYCTRL_REG] = 0xA4,
+	[DSIM_PHYTIMING_REG] = 0xB4,
+	[DSIM_PHYTIMING1_REG] = 0xB8,
+	[DSIM_PHYTIMING2_REG] = 0xBC,
+};
+
+enum reg_value_idx {
+	RESET_TYPE,
+	PLL_TIMER,
+	STOP_STATE_CNT,
+	PHYCTRL_ULPS_EXIT,
+	PHYCTRL_VREG_LP,
+	PHYCTRL_SLEW_UP,
+	PHYTIMING_LPX,
+	PHYTIMING_HS_EXIT,
+	PHYTIMING_CLK_PREPARE,
+	PHYTIMING_CLK_ZERO,
+	PHYTIMING_CLK_POST,
+	PHYTIMING_CLK_TRAIL,
+	PHYTIMING_HS_PREPARE,
+	PHYTIMING_HS_ZERO,
+	PHYTIMING_HS_TRAIL
+};
+
+static const unsigned int reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
+static const unsigned int exynos5422_reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
+};
+
+static const unsigned int exynos5433_reg_values[] = {
+	[RESET_TYPE] = DSIM_FUNCRST,
+	[PLL_TIMER] = 22200,
+	[STOP_STATE_CNT] = 0xa,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
+	[PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
+	[PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
+};
+
+static const struct samsung_dsim_driver_data exynos3_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x50,
+	.has_freqband = 1,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.pll_p_offset = 13,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos4_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x50,
+	.has_freqband = 1,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.pll_p_offset = 13,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x58,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.pll_p_offset = 13,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5433_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 5,
+	.max_freq = 1500,
+	.wait_for_reset = 0,
+	.num_bits_resol = 12,
+	.pll_p_offset = 13,
+	.reg_values = exynos5433_reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1500,
+	.wait_for_reset = 1,
+	.num_bits_resol = 12,
+	.pll_p_offset = 13,
+	.reg_values = exynos5422_reg_values,
+};
+
+static const struct samsung_dsim_driver_data *
+samsung_dsim_types[DSIM_TYPE_COUNT] = {
+	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS4210] = &exynos4_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
+	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
+};
+
+static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
+{
+	return container_of(h, struct samsung_dsim, dsi_host);
+}
+
+static inline struct samsung_dsim *bridge_to_dsi(struct drm_bridge *b)
+{
+	return container_of(b, struct samsung_dsim, bridge);
+}
+
+static inline void samsung_dsim_write(struct samsung_dsim *dsi,
+				      enum reg_idx idx, u32 val)
+{
+	writel(val, dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
+}
+
+static inline u32 samsung_dsim_read(struct samsung_dsim *dsi, enum reg_idx idx)
+{
+	return readl(dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
+}
+
+static void samsung_dsim_wait_for_reset(struct samsung_dsim *dsi)
+{
+	if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
+		return;
+
+	dev_err(dsi->dev, "timeout waiting for reset\n");
+}
+
+static void samsung_dsim_reset(struct samsung_dsim *dsi)
+{
+	u32 reset_val = dsi->driver_data->reg_values[RESET_TYPE];
+
+	reinit_completion(&dsi->completed);
+	samsung_dsim_write(dsi, DSIM_SWRST_REG, reset_val);
+}
+
+#ifndef MHZ
+#define MHZ	(1000 * 1000)
+#endif
+
+static unsigned long samsung_dsim_pll_find_pms(struct samsung_dsim *dsi,
+					       unsigned long fin,
+					       unsigned long fout,
+					       u8 *p, u16 *m, u8 *s)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	unsigned long best_freq = 0;
+	u32 min_delta = 0xffffffff;
+	u8 p_min, p_max;
+	u8 _p, best_p;
+	u16 _m, best_m;
+	u8 _s, best_s;
+
+	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
+	p_max = fin / (6 * MHZ);
+
+	for (_p = p_min; _p <= p_max; ++_p) {
+		for (_s = 0; _s <= 5; ++_s) {
+			u64 tmp;
+			u32 delta;
+
+			tmp = (u64)fout * (_p << _s);
+			do_div(tmp, fin);
+			_m = tmp;
+			if (_m < 41 || _m > 125)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p);
+			if (tmp < 500 * MHZ ||
+			    tmp > driver_data->max_freq * MHZ)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p << _s);
+
+			delta = abs(fout - tmp);
+			if (delta < min_delta) {
+				best_p = _p;
+				best_m = _m;
+				best_s = _s;
+				min_delta = delta;
+				best_freq = tmp;
+			}
+		}
+	}
+
+	if (best_freq) {
+		*p = best_p;
+		*m = best_m;
+		*s = best_s;
+	}
+
+	return best_freq;
+}
+
+static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi,
+					  unsigned long freq)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	unsigned long fin, fout;
+	int timeout;
+	u8 p, s;
+	u16 m;
+	u32 reg;
+
+	fin = dsi->pll_clk_rate;
+	fout = samsung_dsim_pll_find_pms(dsi, fin, freq, &p, &m, &s);
+	if (!fout) {
+		dev_err(dsi->dev,
+			"failed to find PLL PMS for requested frequency\n");
+		return 0;
+	}
+	dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
+
+	writel(driver_data->reg_values[PLL_TIMER],
+	       dsi->reg_base + driver_data->plltmr_reg);
+
+	reg = DSIM_PLL_EN | DSIM_PLL_P(p, driver_data->pll_p_offset) |
+	      DSIM_PLL_M(m) | DSIM_PLL_S(s);
+
+	if (driver_data->has_freqband) {
+		static const unsigned long freq_bands[] = {
+			100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
+			270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
+			510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
+			770 * MHZ, 870 * MHZ, 950 * MHZ,
+		};
+		int band;
+
+		for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
+			if (fout < freq_bands[band])
+				break;
+
+		dev_dbg(dsi->dev, "band %d\n", band);
+
+		reg |= DSIM_FREQ_BAND(band);
+	}
+
+	samsung_dsim_write(dsi, DSIM_PLLCTRL_REG, reg);
+
+	timeout = 1000;
+	do {
+		if (timeout-- == 0) {
+			dev_err(dsi->dev, "PLL failed to stabilize\n");
+			return 0;
+		}
+		reg = samsung_dsim_read(dsi, DSIM_STATUS_REG);
+	} while ((reg & DSIM_PLL_STABLE) == 0);
+
+	return fout;
+}
+
+static int samsung_dsim_enable_clock(struct samsung_dsim *dsi)
+{
+	unsigned long hs_clk, byte_clk, esc_clk;
+	unsigned long esc_div;
+	u32 reg;
+
+	hs_clk = samsung_dsim_set_pll(dsi, dsi->burst_clk_rate);
+	if (!hs_clk) {
+		dev_err(dsi->dev, "failed to configure DSI PLL\n");
+		return -EFAULT;
+	}
+
+	byte_clk = hs_clk / 8;
+	esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
+	esc_clk = byte_clk / esc_div;
+
+	if (esc_clk > 20 * MHZ) {
+		++esc_div;
+		esc_clk = byte_clk / esc_div;
+	}
+
+	dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
+		hs_clk, byte_clk, esc_clk);
+
+	reg = samsung_dsim_read(dsi, DSIM_CLKCTRL_REG);
+	reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
+			| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
+			| DSIM_BYTE_CLK_SRC_MASK);
+	reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
+			| DSIM_ESC_PRESCALER(esc_div)
+			| DSIM_LANE_ESC_CLK_EN_CLK
+			| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
+			| DSIM_BYTE_CLK_SRC(0)
+			| DSIM_TX_REQUEST_HSCLK;
+	samsung_dsim_write(dsi, DSIM_CLKCTRL_REG, reg);
+
+	return 0;
+}
+
+static void samsung_dsim_set_phy_ctrl(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	const unsigned int *reg_values = driver_data->reg_values;
+	u32 reg;
+
+	if (driver_data->has_freqband)
+		return;
+
+	/* B D-PHY: D-PHY Master & Slave Analog Block control */
+	reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
+		reg_values[PHYCTRL_SLEW_UP];
+	samsung_dsim_write(dsi, DSIM_PHYCTRL_REG, reg);
+
+	/*
+	 * T LPX: Transmitted length of any Low-Power state period
+	 * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
+	 *	burst
+	 */
+	reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
+	samsung_dsim_write(dsi, DSIM_PHYTIMING_REG, reg);
+
+	/*
+	 * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
+	 *	Line state immediately before the HS-0 Line state starting the
+	 *	HS transmission
+	 * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
+	 *	transmitting the Clock.
+	 * T CLK_POST: Time that the transmitter continues to send HS clock
+	 *	after the last associated Data Lane has transitioned to LP Mode
+	 *	Interval is defined as the period from the end of T HS-TRAIL to
+	 *	the beginning of T CLK-TRAIL
+	 * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
+	 *	the last payload clock bit of a HS transmission burst
+	 */
+	reg = reg_values[PHYTIMING_CLK_PREPARE] |
+		reg_values[PHYTIMING_CLK_ZERO] |
+		reg_values[PHYTIMING_CLK_POST] |
+		reg_values[PHYTIMING_CLK_TRAIL];
+
+	samsung_dsim_write(dsi, DSIM_PHYTIMING1_REG, reg);
+
+	/*
+	 * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
+	 *	Line state immediately before the HS-0 Line state starting the
+	 *	HS transmission
+	 * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
+	 *	transmitting the Sync sequence.
+	 * T HS-TRAIL: Time that the transmitter drives the flipped differential
+	 *	state after last payload data bit of a HS transmission burst
+	 */
+	reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
+		reg_values[PHYTIMING_HS_TRAIL];
+	samsung_dsim_write(dsi, DSIM_PHYTIMING2_REG, reg);
+}
+
+static void samsung_dsim_disable_clock(struct samsung_dsim *dsi)
+{
+	u32 reg;
+
+	reg = samsung_dsim_read(dsi, DSIM_CLKCTRL_REG);
+	reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
+			| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
+	samsung_dsim_write(dsi, DSIM_CLKCTRL_REG, reg);
+
+	reg = samsung_dsim_read(dsi, DSIM_PLLCTRL_REG);
+	reg &= ~DSIM_PLL_EN;
+	samsung_dsim_write(dsi, DSIM_PLLCTRL_REG, reg);
+}
+
+static void samsung_dsim_enable_lane(struct samsung_dsim *dsi, u32 lane)
+{
+	u32 reg = samsung_dsim_read(dsi, DSIM_CONFIG_REG);
+
+	reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
+			DSIM_LANE_EN(lane));
+	samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);
+}
+
+static int samsung_dsim_init_link(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int timeout;
+	u32 reg;
+	u32 lanes_mask;
+
+	/* Initialize FIFO pointers */
+	reg = samsung_dsim_read(dsi, DSIM_FIFOCTRL_REG);
+	reg &= ~0x1f;
+	samsung_dsim_write(dsi, DSIM_FIFOCTRL_REG, reg);
+
+	usleep_range(9000, 11000);
+
+	reg |= 0x1f;
+	samsung_dsim_write(dsi, DSIM_FIFOCTRL_REG, reg);
+	usleep_range(9000, 11000);
+
+	/* DSI configuration */
+	reg = 0;
+
+	/*
+	 * The first bit of mode_flags specifies display configuration.
+	 * If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
+	 * mode, otherwise it will support command mode.
+	 */
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		reg |= DSIM_VIDEO_MODE;
+
+		/*
+		 * The user manual describes that following bits are ignored in
+		 * command mode.
+		 */
+		if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
+			reg |= DSIM_MFLUSH_VS;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+			reg |= DSIM_SYNC_INFORM;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+			reg |= DSIM_BURST_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
+			reg |= DSIM_AUTO_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
+			reg |= DSIM_HSE_DISABLE_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP)
+			reg |= DSIM_HFP_DISABLE_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP)
+			reg |= DSIM_HBP_DISABLE_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA)
+			reg |= DSIM_HSA_DISABLE_MODE;
+	}
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET)
+		reg |= DSIM_EOT_DISABLE;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
+		break;
+	default:
+		dev_err(dsi->dev, "invalid pixel format\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Use non-continuous clock mode if the periparal wants and
+	 * host controller supports
+	 *
+	 * In non-continous clock mode, host controller will turn off
+	 * the HS clock between high-speed transmissions to reduce
+	 * power consumption.
+	 */
+	if (driver_data->has_clklane_stop &&
+	    dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+		reg |= DSIM_CLKLANE_STOP;
+	samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);
+
+	lanes_mask = BIT(dsi->lanes) - 1;
+	samsung_dsim_enable_lane(dsi, lanes_mask);
+
+	/* Check clock and data lane state are stop state */
+	timeout = 100;
+	do {
+		if (timeout-- == 0) {
+			dev_err(dsi->dev, "waiting for bus lanes timed out\n");
+			return -EFAULT;
+		}
+
+		reg = samsung_dsim_read(dsi, DSIM_STATUS_REG);
+		if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
+		    != DSIM_STOP_STATE_DAT(lanes_mask))
+			continue;
+	} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
+
+	reg = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+	reg &= ~DSIM_STOP_STATE_CNT_MASK;
+	reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, reg);
+
+	reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
+	samsung_dsim_write(dsi, DSIM_TIMEOUT_REG, reg);
+
+	return 0;
+}
+
+static void samsung_dsim_set_display_mode(struct samsung_dsim *dsi)
+{
+	struct drm_display_mode *m = &dsi->mode;
+	unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
+	u32 reg;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		reg = DSIM_CMD_ALLOW(0xf)
+			| DSIM_STABLE_VFP(m->vsync_start - m->vdisplay)
+			| DSIM_MAIN_VBP(m->vtotal - m->vsync_end);
+		samsung_dsim_write(dsi, DSIM_MVPORCH_REG, reg);
+
+		reg = DSIM_MAIN_HFP(m->hsync_start - m->hdisplay)
+			| DSIM_MAIN_HBP(m->htotal - m->hsync_end);
+		samsung_dsim_write(dsi, DSIM_MHPORCH_REG, reg);
+
+		reg = DSIM_MAIN_VSA(m->vsync_end - m->vsync_start)
+			| DSIM_MAIN_HSA(m->hsync_end - m->hsync_start);
+		samsung_dsim_write(dsi, DSIM_MSYNC_REG, reg);
+	}
+	reg =  DSIM_MAIN_HRESOL(m->hdisplay, num_bits_resol) |
+		DSIM_MAIN_VRESOL(m->vdisplay, num_bits_resol);
+
+	samsung_dsim_write(dsi, DSIM_MDRESOL_REG, reg);
+
+	dev_dbg(dsi->dev, "LCD size = %dx%d\n", m->hdisplay, m->vdisplay);
+}
+
+static void samsung_dsim_set_display_enable(struct samsung_dsim *dsi, bool enable)
+{
+	u32 reg;
+
+	reg = samsung_dsim_read(dsi, DSIM_MDRESOL_REG);
+	if (enable)
+		reg |= DSIM_MAIN_STAND_BY;
+	else
+		reg &= ~DSIM_MAIN_STAND_BY;
+	samsung_dsim_write(dsi, DSIM_MDRESOL_REG, reg);
+}
+
+static int samsung_dsim_wait_for_hdr_fifo(struct samsung_dsim *dsi)
+{
+	int timeout = 2000;
+
+	do {
+		u32 reg = samsung_dsim_read(dsi, DSIM_FIFOCTRL_REG);
+
+		if (!(reg & DSIM_SFR_HEADER_FULL))
+			return 0;
+
+		if (!cond_resched())
+			usleep_range(950, 1050);
+	} while (--timeout);
+
+	return -ETIMEDOUT;
+}
+
+static void samsung_dsim_set_cmd_lpm(struct samsung_dsim *dsi, bool lpm)
+{
+	u32 v = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+
+	if (lpm)
+		v |= DSIM_CMD_LPDT_LP;
+	else
+		v &= ~DSIM_CMD_LPDT_LP;
+
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, v);
+}
+
+static void samsung_dsim_force_bta(struct samsung_dsim *dsi)
+{
+	u32 v = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+
+	v |= DSIM_FORCE_BTA;
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, v);
+}
+
+static void samsung_dsim_send_to_fifo(struct samsung_dsim *dsi,
+				      struct samsung_dsim_transfer *xfer)
+{
+	struct device *dev = dsi->dev;
+	struct mipi_dsi_packet *pkt = &xfer->packet;
+	const u8 *payload = pkt->payload + xfer->tx_done;
+	u16 length = pkt->payload_length - xfer->tx_done;
+	bool first = !xfer->tx_done;
+	u32 reg;
+
+	dev_dbg(dev, "< xfer %pK: tx len %u, done %u, rx len %u, done %u\n",
+		xfer, length, xfer->tx_done, xfer->rx_len, xfer->rx_done);
+
+	if (length > DSI_TX_FIFO_SIZE)
+		length = DSI_TX_FIFO_SIZE;
+
+	xfer->tx_done += length;
+
+	/* Send payload */
+	while (length >= 4) {
+		reg = get_unaligned_le32(payload);
+		samsung_dsim_write(dsi, DSIM_PAYLOAD_REG, reg);
+		payload += 4;
+		length -= 4;
+	}
+
+	reg = 0;
+	switch (length) {
+	case 3:
+		reg |= payload[2] << 16;
+		fallthrough;
+	case 2:
+		reg |= payload[1] << 8;
+		fallthrough;
+	case 1:
+		reg |= payload[0];
+		samsung_dsim_write(dsi, DSIM_PAYLOAD_REG, reg);
+		break;
+	}
+
+	/* Send packet header */
+	if (!first)
+		return;
+
+	reg = get_unaligned_le32(pkt->header);
+	if (samsung_dsim_wait_for_hdr_fifo(dsi)) {
+		dev_err(dev, "waiting for header FIFO timed out\n");
+		return;
+	}
+
+	if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
+		 dsi->state & DSIM_STATE_CMD_LPM)) {
+		samsung_dsim_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
+		dsi->state ^= DSIM_STATE_CMD_LPM;
+	}
+
+	samsung_dsim_write(dsi, DSIM_PKTHDR_REG, reg);
+
+	if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
+		samsung_dsim_force_bta(dsi);
+}
+
+static void samsung_dsim_read_from_fifo(struct samsung_dsim *dsi,
+					struct samsung_dsim_transfer *xfer)
+{
+	u8 *payload = xfer->rx_payload + xfer->rx_done;
+	bool first = !xfer->rx_done;
+	struct device *dev = dsi->dev;
+	u16 length;
+	u32 reg;
+
+	if (first) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+
+		switch (reg & 0x3f) {
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+			if (xfer->rx_len >= 2) {
+				payload[1] = reg >> 16;
+				++xfer->rx_done;
+			}
+			fallthrough;
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+			payload[0] = reg >> 8;
+			++xfer->rx_done;
+			xfer->rx_len = xfer->rx_done;
+			xfer->result = 0;
+			goto clear_fifo;
+		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+			dev_err(dev, "DSI Error Report: 0x%04x\n", (reg >> 8) & 0xffff);
+			xfer->result = 0;
+			goto clear_fifo;
+		}
+
+		length = (reg >> 8) & 0xffff;
+		if (length > xfer->rx_len) {
+			dev_err(dev,
+				"response too long (%u > %u bytes), stripping\n",
+				xfer->rx_len, length);
+			length = xfer->rx_len;
+		} else if (length < xfer->rx_len) {
+			xfer->rx_len = length;
+		}
+	}
+
+	length = xfer->rx_len - xfer->rx_done;
+	xfer->rx_done += length;
+
+	/* Receive payload */
+	while (length >= 4) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		payload[0] = (reg >>  0) & 0xff;
+		payload[1] = (reg >>  8) & 0xff;
+		payload[2] = (reg >> 16) & 0xff;
+		payload[3] = (reg >> 24) & 0xff;
+		payload += 4;
+		length -= 4;
+	}
+
+	if (length) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		switch (length) {
+		case 3:
+			payload[2] = (reg >> 16) & 0xff;
+			fallthrough;
+		case 2:
+			payload[1] = (reg >> 8) & 0xff;
+			fallthrough;
+		case 1:
+			payload[0] = reg & 0xff;
+		}
+	}
+
+	if (xfer->rx_done == xfer->rx_len)
+		xfer->result = 0;
+
+clear_fifo:
+	length = DSI_RX_FIFO_SIZE / 4;
+	do {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		if (reg == DSI_RX_FIFO_EMPTY)
+			break;
+	} while (--length);
+}
+
+static void samsung_dsim_transfer_start(struct samsung_dsim *dsi)
+{
+	unsigned long flags;
+	struct samsung_dsim_transfer *xfer;
+	bool start = false;
+
+again:
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (list_empty(&dsi->transfer_list)) {
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		return;
+	}
+
+	xfer = list_first_entry(&dsi->transfer_list,
+				struct samsung_dsim_transfer, list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (xfer->packet.payload_length &&
+	    xfer->tx_done == xfer->packet.payload_length)
+		/* waiting for RX */
+		return;
+
+	samsung_dsim_send_to_fifo(dsi, xfer);
+
+	if (xfer->packet.payload_length || xfer->rx_len)
+		return;
+
+	xfer->result = 0;
+	complete(&xfer->completed);
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	list_del_init(&xfer->list);
+	start = !list_empty(&dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (start)
+		goto again;
+}
+
+static bool samsung_dsim_transfer_finish(struct samsung_dsim *dsi)
+{
+	struct samsung_dsim_transfer *xfer;
+	unsigned long flags;
+	bool start = true;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (list_empty(&dsi->transfer_list)) {
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		return false;
+	}
+
+	xfer = list_first_entry(&dsi->transfer_list,
+				struct samsung_dsim_transfer, list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	dev_dbg(dsi->dev,
+		"> xfer %pK, tx_len %zu, tx_done %u, rx_len %u, rx_done %u\n",
+		xfer, xfer->packet.payload_length, xfer->tx_done, xfer->rx_len,
+		xfer->rx_done);
+
+	if (xfer->tx_done != xfer->packet.payload_length)
+		return true;
+
+	if (xfer->rx_done != xfer->rx_len)
+		samsung_dsim_read_from_fifo(dsi, xfer);
+
+	if (xfer->rx_done != xfer->rx_len)
+		return true;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	list_del_init(&xfer->list);
+	start = !list_empty(&dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (!xfer->rx_len)
+		xfer->result = 0;
+	complete(&xfer->completed);
+
+	return start;
+}
+
+static void samsung_dsim_remove_transfer(struct samsung_dsim *dsi,
+					 struct samsung_dsim_transfer *xfer)
+{
+	unsigned long flags;
+	bool start;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (!list_empty(&dsi->transfer_list) &&
+	    xfer == list_first_entry(&dsi->transfer_list,
+				     struct samsung_dsim_transfer, list)) {
+		list_del_init(&xfer->list);
+		start = !list_empty(&dsi->transfer_list);
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		if (start)
+			samsung_dsim_transfer_start(dsi);
+		return;
+	}
+
+	list_del_init(&xfer->list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+}
+
+static int samsung_dsim_transfer(struct samsung_dsim *dsi,
+				 struct samsung_dsim_transfer *xfer)
+{
+	unsigned long flags;
+	bool stopped;
+
+	xfer->tx_done = 0;
+	xfer->rx_done = 0;
+	xfer->result = -ETIMEDOUT;
+	init_completion(&xfer->completed);
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	stopped = list_empty(&dsi->transfer_list);
+	list_add_tail(&xfer->list, &dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (stopped)
+		samsung_dsim_transfer_start(dsi);
+
+	wait_for_completion_timeout(&xfer->completed,
+				    msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
+	if (xfer->result == -ETIMEDOUT) {
+		struct mipi_dsi_packet *pkt = &xfer->packet;
+
+		samsung_dsim_remove_transfer(dsi, xfer);
+		dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 4, pkt->header,
+			(int)pkt->payload_length, pkt->payload);
+		return -ETIMEDOUT;
+	}
+
+	/* Also covers hardware timeout condition */
+	return xfer->result;
+}
+
+static irqreturn_t samsung_dsim_irq(int irq, void *dev_id)
+{
+	struct samsung_dsim *dsi = dev_id;
+	u32 status;
+
+	status = samsung_dsim_read(dsi, DSIM_INTSRC_REG);
+	if (!status) {
+		static unsigned long j;
+
+		if (printk_timed_ratelimit(&j, 500))
+			dev_warn(dsi->dev, "spurious interrupt\n");
+		return IRQ_HANDLED;
+	}
+	samsung_dsim_write(dsi, DSIM_INTSRC_REG, status);
+
+	if (status & DSIM_INT_SW_RST_RELEASE) {
+		unsigned long mask = ~(DSIM_INT_RX_DONE |
+				       DSIM_INT_SFR_FIFO_EMPTY |
+				       DSIM_INT_SFR_HDR_FIFO_EMPTY |
+				       DSIM_INT_RX_ECC_ERR |
+				       DSIM_INT_SW_RST_RELEASE);
+		samsung_dsim_write(dsi, DSIM_INTMSK_REG, mask);
+		complete(&dsi->completed);
+		return IRQ_HANDLED;
+	}
+
+	if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+			DSIM_INT_PLL_STABLE)))
+		return IRQ_HANDLED;
+
+	if (samsung_dsim_transfer_finish(dsi))
+		samsung_dsim_transfer_start(dsi);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_dsim_enable_irq(struct samsung_dsim *dsi)
+{
+	enable_irq(dsi->irq);
+
+	if (dsi->te_gpio)
+		enable_irq(gpiod_to_irq(dsi->te_gpio));
+}
+
+static void samsung_dsim_disable_irq(struct samsung_dsim *dsi)
+{
+	if (dsi->te_gpio)
+		disable_irq(gpiod_to_irq(dsi->te_gpio));
+
+	disable_irq(dsi->irq);
+}
+
+static int samsung_dsim_init(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+
+	if (dsi->state & DSIM_STATE_INITIALIZED)
+		return 0;
+
+	samsung_dsim_reset(dsi);
+	samsung_dsim_enable_irq(dsi);
+
+	if (driver_data->reg_values[RESET_TYPE] == DSIM_FUNCRST)
+		samsung_dsim_enable_lane(dsi, BIT(dsi->lanes) - 1);
+
+	samsung_dsim_enable_clock(dsi);
+	if (driver_data->wait_for_reset)
+		samsung_dsim_wait_for_reset(dsi);
+	samsung_dsim_set_phy_ctrl(dsi);
+	samsung_dsim_init_link(dsi);
+
+	dsi->state |= DSIM_STATE_INITIALIZED;
+
+	return 0;
+}
+
+static void samsung_dsim_atomic_pre_enable(struct drm_bridge *bridge,
+					   struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+	int ret;
+
+	if (dsi->state & DSIM_STATE_ENABLED)
+		return;
+
+	ret = pm_runtime_resume_and_get(dsi->dev);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to enable DSI device.\n");
+		return;
+	}
+
+	dsi->state |= DSIM_STATE_ENABLED;
+
+	/*
+	 * For Exynos-DSIM the downstream bridge, or panel are expecting
+	 * the host initialization during DSI transfer.
+	 */
+	if (!samsung_dsim_hw_is_exynos(dsi->plat_data->hw_type)) {
+		ret = samsung_dsim_init(dsi);
+		if (ret)
+			return;
+	}
+}
+
+static void samsung_dsim_atomic_enable(struct drm_bridge *bridge,
+				       struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	samsung_dsim_set_display_mode(dsi);
+	samsung_dsim_set_display_enable(dsi, true);
+
+	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
+}
+
+static void samsung_dsim_atomic_disable(struct drm_bridge *bridge,
+					struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	if (!(dsi->state & DSIM_STATE_ENABLED))
+		return;
+
+	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
+}
+
+static void samsung_dsim_atomic_post_disable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	samsung_dsim_set_display_enable(dsi, false);
+
+	dsi->state &= ~DSIM_STATE_ENABLED;
+	pm_runtime_put_sync(dsi->dev);
+}
+
+/*
+ * This pixel output formats list referenced from,
+ * AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
+ * 3.7.4 Pixel formats
+ * Table 14. DSI pixel packing formats
+ */
+static const u32 samsung_dsim_pixel_output_fmts[] = {
+	MEDIA_BUS_FMT_YUYV10_1X20,
+	MEDIA_BUS_FMT_YUYV12_1X24,
+	MEDIA_BUS_FMT_UYVY8_1X16,
+	MEDIA_BUS_FMT_RGB101010_1X30,
+	MEDIA_BUS_FMT_RGB121212_1X36,
+	MEDIA_BUS_FMT_RGB565_1X16,
+	MEDIA_BUS_FMT_RGB666_1X18,
+	MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+static bool samsung_dsim_pixel_output_fmt_supported(u32 fmt)
+{
+	int i;
+
+	if (fmt == MEDIA_BUS_FMT_FIXED)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(samsung_dsim_pixel_output_fmts); i++) {
+		if (samsung_dsim_pixel_output_fmts[i] == fmt)
+			return true;
+	}
+
+	return false;
+}
+
+static u32 *
+samsung_dsim_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				       struct drm_bridge_state *bridge_state,
+				       struct drm_crtc_state *crtc_state,
+				       struct drm_connector_state *conn_state,
+				       u32 output_fmt,
+				       unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	if (!samsung_dsim_pixel_output_fmt_supported(output_fmt))
+		/*
+		 * Some bridge/display drivers are still not able to pass the
+		 * correct format, so handle those pipelines by falling back
+		 * to the default format till the supported formats finalized.
+		 */
+		output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+	input_fmts[0] = output_fmt;
+	*num_input_fmts = 1;
+
+	return input_fmts;
+}
+
+static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
+				     struct drm_bridge_state *bridge_state,
+				     struct drm_crtc_state *crtc_state,
+				     struct drm_connector_state *conn_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+	/*
+	 * The i.MX8M Mini/Nano glue logic between LCDIF and DSIM
+	 * inverts HS/VS/DE sync signals polarity, therefore, while
+	 * i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
+	 * 13.6.3.5.2 RGB interface
+	 * i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
+	 * 13.6.2.7.2 RGB interface
+	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
+	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+	 */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
+		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	}
+
+	return 0;
+}
+
+static void samsung_dsim_mode_set(struct drm_bridge *bridge,
+				  const struct drm_display_mode *mode,
+				  const struct drm_display_mode *adjusted_mode)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	drm_mode_copy(&dsi->mode, adjusted_mode);
+}
+
+static int samsung_dsim_attach(struct drm_bridge *bridge,
+			       enum drm_bridge_attach_flags flags)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge,
+				 flags);
+}
+
+static const struct drm_bridge_funcs samsung_dsim_bridge_funcs = {
+	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_get_input_bus_fmts	= samsung_dsim_atomic_get_input_bus_fmts,
+	.atomic_check			= samsung_dsim_atomic_check,
+	.atomic_pre_enable		= samsung_dsim_atomic_pre_enable,
+	.atomic_enable			= samsung_dsim_atomic_enable,
+	.atomic_disable			= samsung_dsim_atomic_disable,
+	.atomic_post_disable		= samsung_dsim_atomic_post_disable,
+	.mode_set			= samsung_dsim_mode_set,
+	.attach				= samsung_dsim_attach,
+};
+
+static irqreturn_t samsung_dsim_te_irq_handler(int irq, void *dev_id)
+{
+	struct samsung_dsim *dsi = (struct samsung_dsim *)dev_id;
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+
+	if (pdata->host_ops && pdata->host_ops->te_irq_handler)
+		return pdata->host_ops->te_irq_handler(dsi);
+
+	return IRQ_HANDLED;
+}
+
+static int samsung_dsim_register_te_irq(struct samsung_dsim *dsi, struct device *dev)
+{
+	int te_gpio_irq;
+	int ret;
+
+	dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
+	if (IS_ERR(dsi->te_gpio))
+		return dev_err_probe(dev, PTR_ERR(dsi->te_gpio), "failed to get te GPIO\n");
+
+	te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
+
+	ret = request_threaded_irq(te_gpio_irq, samsung_dsim_te_irq_handler, NULL,
+				   IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, "TE", dsi);
+	if (ret) {
+		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
+		gpiod_put(dsi->te_gpio);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int samsung_dsim_host_attach(struct mipi_dsi_host *host,
+				    struct mipi_dsi_device *device)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+	struct device *dev = dsi->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *remote;
+	struct drm_panel *panel;
+	int ret;
+
+	/**
+	 * Devices can also be child nodes when we also control that device
+	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
+	 *
+	 * Lookup for a child node of the given parent that isn't either port
+	 * or ports.
+	 */
+	for_each_available_child_of_node(np, remote) {
+		if (of_node_name_eq(remote, "port") ||
+		    of_node_name_eq(remote, "ports"))
+			continue;
+
+		goto of_find_panel_or_bridge;
+	}
+
+	/*
+	 * of_graph_get_remote_node() produces a noisy error message if port
+	 * node isn't found and the absence of the port is a legit case here,
+	 * so at first we silently check whether graph presents in the
+	 * device-tree node.
+	 */
+	if (!of_graph_is_present(np))
+		return -ENODEV;
+
+	remote = of_graph_get_remote_node(np, 1, 0);
+
+of_find_panel_or_bridge:
+	if (!remote)
+		return -ENODEV;
+
+	panel = of_drm_find_panel(remote);
+	if (!IS_ERR(panel)) {
+		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
+	} else {
+		dsi->out_bridge = of_drm_find_bridge(remote);
+		if (!dsi->out_bridge)
+			dsi->out_bridge = ERR_PTR(-EINVAL);
+	}
+
+	of_node_put(remote);
+
+	if (IS_ERR(dsi->out_bridge)) {
+		ret = PTR_ERR(dsi->out_bridge);
+		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
+		return ret;
+	}
+
+	DRM_DEV_INFO(dev, "Attached %s device\n", device->name);
+
+	drm_bridge_add(&dsi->bridge);
+
+	if (pdata->host_ops && pdata->host_ops->attach)
+		pdata->host_ops->attach(dsi, device);
+
+	/*
+	 * This is a temporary solution and should be made by more generic way.
+	 *
+	 * If attached panel device is for command mode one, dsi should register
+	 * TE interrupt handler.
+	 */
+	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
+		ret = samsung_dsim_register_te_irq(dsi, &device->dev);
+		if (ret)
+			return ret;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+
+	return 0;
+}
+
+static void samsung_dsim_unregister_te_irq(struct samsung_dsim *dsi)
+{
+	if (dsi->te_gpio) {
+		free_irq(gpiod_to_irq(dsi->te_gpio), dsi);
+		gpiod_put(dsi->te_gpio);
+	}
+}
+
+static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
+				    struct mipi_dsi_device *device)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+
+	if (dsi->out_bridge->funcs->detach)
+		dsi->out_bridge->funcs->detach(dsi->out_bridge);
+
+	dsi->out_bridge = NULL;
+
+	if (pdata->host_ops && pdata->host_ops->detach)
+		pdata->host_ops->detach(dsi, device);
+
+	samsung_dsim_unregister_te_irq(dsi);
+
+	drm_bridge_remove(&dsi->bridge);
+
+	return 0;
+}
+
+static ssize_t samsung_dsim_host_transfer(struct mipi_dsi_host *host,
+					  const struct mipi_dsi_msg *msg)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	struct samsung_dsim_transfer xfer;
+	int ret;
+
+	if (!(dsi->state & DSIM_STATE_ENABLED))
+		return -EINVAL;
+
+	ret = samsung_dsim_init(dsi);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_create_packet(&xfer.packet, msg);
+	if (ret < 0)
+		return ret;
+
+	xfer.rx_len = msg->rx_len;
+	xfer.rx_payload = msg->rx_buf;
+	xfer.flags = msg->flags;
+
+	ret = samsung_dsim_transfer(dsi, &xfer);
+	return (ret < 0) ? ret : xfer.rx_done;
+}
+
+static const struct mipi_dsi_host_ops samsung_dsim_ops = {
+	.attach = samsung_dsim_host_attach,
+	.detach = samsung_dsim_host_detach,
+	.transfer = samsung_dsim_host_transfer,
+};
+
+static int samsung_dsim_of_read_u32(const struct device_node *np,
+				    const char *propname, u32 *out_value)
+{
+	int ret = of_property_read_u32(np, propname, out_value);
+
+	if (ret < 0)
+		pr_err("%pOF: failed to get '%s' property\n", np, propname);
+
+	return ret;
+}
+
+static int samsung_dsim_parse_dt(struct samsung_dsim *dsi)
+{
+	struct device *dev = dsi->dev;
+	struct device_node *node = dev->of_node;
+	int ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,pll-clock-frequency",
+				       &dsi->pll_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,burst-clock-frequency",
+				       &dsi->burst_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,esc-clock-frequency",
+				       &dsi->esc_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int generic_dsim_register_host(struct samsung_dsim *dsi)
+{
+	return mipi_dsi_host_register(&dsi->dsi_host);
+}
+
+static void generic_dsim_unregister_host(struct samsung_dsim *dsi)
+{
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+}
+
+static const struct samsung_dsim_host_ops generic_dsim_host_ops = {
+	.register_host = generic_dsim_register_host,
+	.unregister_host = generic_dsim_unregister_host,
+};
+
+static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_low = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
+int samsung_dsim_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct samsung_dsim *dsi;
+	int ret, i;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	init_completion(&dsi->completed);
+	spin_lock_init(&dsi->transfer_lock);
+	INIT_LIST_HEAD(&dsi->transfer_list);
+
+	dsi->dsi_host.ops = &samsung_dsim_ops;
+	dsi->dsi_host.dev = dev;
+
+	dsi->dev = dev;
+	dsi->plat_data = of_device_get_match_data(dev);
+	dsi->driver_data = samsung_dsim_types[dsi->plat_data->hw_type];
+
+	dsi->supplies[0].supply = "vddcore";
+	dsi->supplies[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
+				      dsi->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get regulators\n");
+
+	dsi->clks = devm_kcalloc(dev, dsi->driver_data->num_clks,
+				 sizeof(*dsi->clks), GFP_KERNEL);
+	if (!dsi->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < dsi->driver_data->num_clks; i++) {
+		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
+		if (IS_ERR(dsi->clks[i])) {
+			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
+				dsi->clks[i] = devm_clk_get(dev, OLD_SCLK_MIPI_CLK_NAME);
+				if (!IS_ERR(dsi->clks[i]))
+					continue;
+			}
+
+			dev_info(dev, "failed to get the clock: %s\n", clk_names[i]);
+			return PTR_ERR(dsi->clks[i]);
+		}
+	}
+
+	dsi->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dsi->reg_base))
+		return PTR_ERR(dsi->reg_base);
+
+	dsi->phy = devm_phy_optional_get(dev, "dsim");
+	if (IS_ERR(dsi->phy)) {
+		dev_info(dev, "failed to get dsim phy\n");
+		return PTR_ERR(dsi->phy);
+	}
+
+	dsi->irq = platform_get_irq(pdev, 0);
+	if (dsi->irq < 0)
+		return dsi->irq;
+
+	ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
+					samsung_dsim_irq,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					dev_name(dev), dsi);
+	if (ret) {
+		dev_err(dev, "failed to request dsi irq\n");
+		return ret;
+	}
+
+	ret = samsung_dsim_parse_dt(dsi);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, dsi);
+
+	pm_runtime_enable(dev);
+
+	dsi->bridge.funcs = &samsung_dsim_bridge_funcs;
+	dsi->bridge.of_node = dev->of_node;
+	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+
+	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
+	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
+		dsi->bridge.timings = &samsung_dsim_bridge_timings_de_low;
+
+	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
+		ret = dsi->plat_data->host_ops->register_host(dsi);
+
+	if (ret)
+		goto err_disable_runtime;
+
+	return 0;
+
+err_disable_runtime:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(samsung_dsim_probe);
+
+int samsung_dsim_remove(struct platform_device *pdev)
+{
+	struct samsung_dsim *dsi = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->unregister_host)
+		dsi->plat_data->host_ops->unregister_host(dsi);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(samsung_dsim_remove);
+
+static int __maybe_unused samsung_dsim_suspend(struct device *dev)
+{
+	struct samsung_dsim *dsi = dev_get_drvdata(dev);
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int ret, i;
+
+	usleep_range(10000, 20000);
+
+	if (dsi->state & DSIM_STATE_INITIALIZED) {
+		dsi->state &= ~DSIM_STATE_INITIALIZED;
+
+		samsung_dsim_disable_clock(dsi);
+
+		samsung_dsim_disable_irq(dsi);
+	}
+
+	dsi->state &= ~DSIM_STATE_CMD_LPM;
+
+	phy_power_off(dsi->phy);
+
+	for (i = driver_data->num_clks - 1; i > -1; i--)
+		clk_disable_unprepare(dsi->clks[i]);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+	if (ret < 0)
+		dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
+
+	return 0;
+}
+
+static int __maybe_unused samsung_dsim_resume(struct device *dev)
+{
+	struct samsung_dsim *dsi = dev_get_drvdata(dev);
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int ret, i;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+	if (ret < 0) {
+		dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < driver_data->num_clks; i++) {
+		ret = clk_prepare_enable(dsi->clks[i]);
+		if (ret < 0)
+			goto err_clk;
+	}
+
+	ret = phy_power_on(dsi->phy);
+	if (ret < 0) {
+		dev_err(dsi->dev, "cannot enable phy %d\n", ret);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (--i > -1)
+		clk_disable_unprepare(dsi->clks[i]);
+	regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+
+	return ret;
+}
+
+const struct dev_pm_ops samsung_dsim_pm_ops = {
+	SET_RUNTIME_PM_OPS(samsung_dsim_suspend, samsung_dsim_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+EXPORT_SYMBOL_GPL(samsung_dsim_pm_ops);
+
+static const struct of_device_id samsung_dsim_of_match[] = {
+	{ /* sentinel. */ }
+};
+MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
+
+static struct platform_driver samsung_dsim_driver = {
+	.probe = samsung_dsim_probe,
+	.remove = samsung_dsim_remove,
+	.driver = {
+		   .name = "samsung-dsim",
+		   .owner = THIS_MODULE,
+		   .pm = &samsung_dsim_pm_ops,
+		   .of_match_table = samsung_dsim_of_match,
+	},
+};
+
+module_platform_driver(samsung_dsim_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Samsung MIPI DSIM controller bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 3d2f025d4fd4..a65acfed15b9 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -59,6 +59,7 @@ config DRM_EXYNOS_DSI
 	depends on DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON
 	select DRM_MIPI_DSI
 	select DRM_PANEL
+	select DRM_SAMSUNG_DSIM
 	default n
 	help
 	  This enables support for Exynos MIPI-DSI device.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 2fc166ebe3c7..c429c9dfd621 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1,1770 +1,30 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Samsung SoC MIPI DSI Master driver.
+ * Samsung MIPI DSIM glue for Exynos SoCs.
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd
  *
  * Contacts: Tomasz Figa <t.figa@samsung.com>
-*/
+ */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/component.h>
-#include <linux/gpio/consumer.h>
-#include <linux/irq.h>
-#include <linux/media-bus-format.h>
 #include <linux/of_device.h>
-#include <linux/of_graph.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/unaligned.h>
 
-#include <video/mipi_display.h>
-#include <video/videomode.h>
-
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_bridge.h>
-#include <drm/drm_mipi_dsi.h>
-#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
+#include <drm/bridge/samsung-dsim.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
 
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_drv.h"
 
-/* returns true iff both arguments logically differs */
-#define NEQV(a, b) (!(a) ^ !(b))
-
-/* DSIM_STATUS */
-#define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
-#define DSIM_STOP_STATE_CLK		(1 << 8)
-#define DSIM_TX_READY_HS_CLK		(1 << 10)
-#define DSIM_PLL_STABLE			(1 << 31)
-
-/* DSIM_SWRST */
-#define DSIM_FUNCRST			(1 << 16)
-#define DSIM_SWRST			(1 << 0)
-
-/* DSIM_TIMEOUT */
-#define DSIM_LPDR_TIMEOUT(x)		((x) << 0)
-#define DSIM_BTA_TIMEOUT(x)		((x) << 16)
-
-/* DSIM_CLKCTRL */
-#define DSIM_ESC_PRESCALER(x)		(((x) & 0xffff) << 0)
-#define DSIM_ESC_PRESCALER_MASK		(0xffff << 0)
-#define DSIM_LANE_ESC_CLK_EN_CLK	(1 << 19)
-#define DSIM_LANE_ESC_CLK_EN_DATA(x)	(((x) & 0xf) << 20)
-#define DSIM_LANE_ESC_CLK_EN_DATA_MASK	(0xf << 20)
-#define DSIM_BYTE_CLKEN			(1 << 24)
-#define DSIM_BYTE_CLK_SRC(x)		(((x) & 0x3) << 25)
-#define DSIM_BYTE_CLK_SRC_MASK		(0x3 << 25)
-#define DSIM_PLL_BYPASS			(1 << 27)
-#define DSIM_ESC_CLKEN			(1 << 28)
-#define DSIM_TX_REQUEST_HSCLK		(1 << 31)
-
-/* DSIM_CONFIG */
-#define DSIM_LANE_EN_CLK		(1 << 0)
-#define DSIM_LANE_EN(x)			(((x) & 0xf) << 1)
-#define DSIM_NUM_OF_DATA_LANE(x)	(((x) & 0x3) << 5)
-#define DSIM_SUB_PIX_FORMAT(x)		(((x) & 0x7) << 8)
-#define DSIM_MAIN_PIX_FORMAT_MASK	(0x7 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB888	(0x7 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB666	(0x6 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB666_P	(0x5 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB565	(0x4 << 12)
-#define DSIM_SUB_VC			(((x) & 0x3) << 16)
-#define DSIM_MAIN_VC			(((x) & 0x3) << 18)
-#define DSIM_HSA_DISABLE_MODE		(1 << 20)
-#define DSIM_HBP_DISABLE_MODE		(1 << 21)
-#define DSIM_HFP_DISABLE_MODE		(1 << 22)
-/*
- * The i.MX 8M Mini Applications Processor Reference Manual,
- * Rev. 3, 11/2020 Page 4091
- * The i.MX 8M Nano Applications Processor Reference Manual,
- * Rev. 2, 07/2022 Page 3058
- * The i.MX 8M Plus Applications Processor Reference Manual,
- * Rev. 1, 06/2021 Page 5436
- * named this bit as 'HseDisableMode' but the bit definition
- * is quite opposite like
- * 0 = Disables transfer
- * 1 = Enables transfer
- * which clearly states that HSE is not a disable bit.
- *
- * This bit is named as per the manual even though it is not
- * a disable bit however the driver logic for handling HSE
- * is based on the MIPI_DSI_MODE_VIDEO_HSE flag itself.
- */
-#define DSIM_HSE_DISABLE_MODE		(1 << 23)
-#define DSIM_AUTO_MODE			(1 << 24)
-#define DSIM_VIDEO_MODE			(1 << 25)
-#define DSIM_BURST_MODE			(1 << 26)
-#define DSIM_SYNC_INFORM		(1 << 27)
-#define DSIM_EOT_DISABLE		(1 << 28)
-#define DSIM_MFLUSH_VS			(1 << 29)
-/* This flag is valid only for exynos3250/3472/5260/5430 */
-#define DSIM_CLKLANE_STOP		(1 << 30)
-
-/* DSIM_ESCMODE */
-#define DSIM_TX_TRIGGER_RST		(1 << 4)
-#define DSIM_TX_LPDT_LP			(1 << 6)
-#define DSIM_CMD_LPDT_LP		(1 << 7)
-#define DSIM_FORCE_BTA			(1 << 16)
-#define DSIM_FORCE_STOP_STATE		(1 << 20)
-#define DSIM_STOP_STATE_CNT(x)		(((x) & 0x7ff) << 21)
-#define DSIM_STOP_STATE_CNT_MASK	(0x7ff << 21)
-
-/* DSIM_MDRESOL */
-#define DSIM_MAIN_STAND_BY		(1 << 31)
-#define DSIM_MAIN_VRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 16)
-#define DSIM_MAIN_HRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 0)
-
-/* DSIM_MVPORCH */
-#define DSIM_CMD_ALLOW(x)		((x) << 28)
-#define DSIM_STABLE_VFP(x)		((x) << 16)
-#define DSIM_MAIN_VBP(x)		((x) << 0)
-#define DSIM_CMD_ALLOW_MASK		(0xf << 28)
-#define DSIM_STABLE_VFP_MASK		(0x7ff << 16)
-#define DSIM_MAIN_VBP_MASK		(0x7ff << 0)
-
-/* DSIM_MHPORCH */
-#define DSIM_MAIN_HFP(x)		((x) << 16)
-#define DSIM_MAIN_HBP(x)		((x) << 0)
-#define DSIM_MAIN_HFP_MASK		((0xffff) << 16)
-#define DSIM_MAIN_HBP_MASK		((0xffff) << 0)
-
-/* DSIM_MSYNC */
-#define DSIM_MAIN_VSA(x)		((x) << 22)
-#define DSIM_MAIN_HSA(x)		((x) << 0)
-#define DSIM_MAIN_VSA_MASK		((0x3ff) << 22)
-#define DSIM_MAIN_HSA_MASK		((0xffff) << 0)
-
-/* DSIM_SDRESOL */
-#define DSIM_SUB_STANDY(x)		((x) << 31)
-#define DSIM_SUB_VRESOL(x)		((x) << 16)
-#define DSIM_SUB_HRESOL(x)		((x) << 0)
-#define DSIM_SUB_STANDY_MASK		((0x1) << 31)
-#define DSIM_SUB_VRESOL_MASK		((0x7ff) << 16)
-#define DSIM_SUB_HRESOL_MASK		((0x7ff) << 0)
-
-/* DSIM_INTSRC */
-#define DSIM_INT_PLL_STABLE		(1 << 31)
-#define DSIM_INT_SW_RST_RELEASE		(1 << 30)
-#define DSIM_INT_SFR_FIFO_EMPTY		(1 << 29)
-#define DSIM_INT_SFR_HDR_FIFO_EMPTY	(1 << 28)
-#define DSIM_INT_BTA			(1 << 25)
-#define DSIM_INT_FRAME_DONE		(1 << 24)
-#define DSIM_INT_RX_TIMEOUT		(1 << 21)
-#define DSIM_INT_BTA_TIMEOUT		(1 << 20)
-#define DSIM_INT_RX_DONE		(1 << 18)
-#define DSIM_INT_RX_TE			(1 << 17)
-#define DSIM_INT_RX_ACK			(1 << 16)
-#define DSIM_INT_RX_ECC_ERR		(1 << 15)
-#define DSIM_INT_RX_CRC_ERR		(1 << 14)
-
-/* DSIM_FIFOCTRL */
-#define DSIM_RX_DATA_FULL		(1 << 25)
-#define DSIM_RX_DATA_EMPTY		(1 << 24)
-#define DSIM_SFR_HEADER_FULL		(1 << 23)
-#define DSIM_SFR_HEADER_EMPTY		(1 << 22)
-#define DSIM_SFR_PAYLOAD_FULL		(1 << 21)
-#define DSIM_SFR_PAYLOAD_EMPTY		(1 << 20)
-#define DSIM_I80_HEADER_FULL		(1 << 19)
-#define DSIM_I80_HEADER_EMPTY		(1 << 18)
-#define DSIM_I80_PAYLOAD_FULL		(1 << 17)
-#define DSIM_I80_PAYLOAD_EMPTY		(1 << 16)
-#define DSIM_SD_HEADER_FULL		(1 << 15)
-#define DSIM_SD_HEADER_EMPTY		(1 << 14)
-#define DSIM_SD_PAYLOAD_FULL		(1 << 13)
-#define DSIM_SD_PAYLOAD_EMPTY		(1 << 12)
-#define DSIM_MD_HEADER_FULL		(1 << 11)
-#define DSIM_MD_HEADER_EMPTY		(1 << 10)
-#define DSIM_MD_PAYLOAD_FULL		(1 << 9)
-#define DSIM_MD_PAYLOAD_EMPTY		(1 << 8)
-#define DSIM_RX_FIFO			(1 << 4)
-#define DSIM_SFR_FIFO			(1 << 3)
-#define DSIM_I80_FIFO			(1 << 2)
-#define DSIM_SD_FIFO			(1 << 1)
-#define DSIM_MD_FIFO			(1 << 0)
-
-/* DSIM_PHYACCHR */
-#define DSIM_AFC_EN			(1 << 14)
-#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
-
-/* DSIM_PLLCTRL */
-#define DSIM_FREQ_BAND(x)		((x) << 24)
-#define DSIM_PLL_EN			(1 << 23)
-#define DSIM_PLL_P(x, offset)		((x) << (offset))
-#define DSIM_PLL_M(x)			((x) << 4)
-#define DSIM_PLL_S(x)			((x) << 1)
-
-/* DSIM_PHYCTRL */
-#define DSIM_PHYCTRL_ULPS_EXIT(x)	(((x) & 0x1ff) << 0)
-#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP	(1 << 30)
-#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP	(1 << 14)
-
-/* DSIM_PHYTIMING */
-#define DSIM_PHYTIMING_LPX(x)		((x) << 8)
-#define DSIM_PHYTIMING_HS_EXIT(x)	((x) << 0)
-
-/* DSIM_PHYTIMING1 */
-#define DSIM_PHYTIMING1_CLK_PREPARE(x)	((x) << 24)
-#define DSIM_PHYTIMING1_CLK_ZERO(x)	((x) << 16)
-#define DSIM_PHYTIMING1_CLK_POST(x)	((x) << 8)
-#define DSIM_PHYTIMING1_CLK_TRAIL(x)	((x) << 0)
-
-/* DSIM_PHYTIMING2 */
-#define DSIM_PHYTIMING2_HS_PREPARE(x)	((x) << 16)
-#define DSIM_PHYTIMING2_HS_ZERO(x)	((x) << 8)
-#define DSIM_PHYTIMING2_HS_TRAIL(x)	((x) << 0)
-
-#define DSI_MAX_BUS_WIDTH		4
-#define DSI_NUM_VIRTUAL_CHANNELS	4
-#define DSI_TX_FIFO_SIZE		2048
-#define DSI_RX_FIFO_SIZE		256
-#define DSI_XFER_TIMEOUT_MS		100
-#define DSI_RX_FIFO_EMPTY		0x30800002
-
-#define OLD_SCLK_MIPI_CLK_NAME "pll_clk"
-
-static const char *const clk_names[5] = { "bus_clk", "sclk_mipi",
-	"phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
-	"sclk_rgb_vclk_to_dsim0" };
-
-enum exynos_dsi_transfer_type {
-	EXYNOS_DSI_TX,
-	EXYNOS_DSI_RX,
-};
-
-struct exynos_dsi_transfer {
-	struct list_head list;
-	struct completion completed;
-	int result;
-	struct mipi_dsi_packet packet;
-	u16 flags;
-	u16 tx_done;
-
-	u8 *rx_payload;
-	u16 rx_len;
-	u16 rx_done;
-};
-
-#define DSIM_STATE_ENABLED		BIT(0)
-#define DSIM_STATE_INITIALIZED		BIT(1)
-#define DSIM_STATE_CMD_LPM		BIT(2)
-#define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
-
-#define exynos_dsi_hw_is_exynos(hw) \
-	((hw) >= DSIM_TYPE_EXYNOS3250 && (hw) <= DSIM_TYPE_EXYNOS5433)
-
-enum exynos_dsi_type {
-	DSIM_TYPE_EXYNOS3250,
-	DSIM_TYPE_EXYNOS4210,
-	DSIM_TYPE_EXYNOS5410,
-	DSIM_TYPE_EXYNOS5422,
-	DSIM_TYPE_EXYNOS5433,
-	DSIM_TYPE_IMX8MM,
-	DSIM_TYPE_COUNT,
-};
-
-struct exynos_dsi_driver_data {
-	const unsigned int *reg_ofs;
-	unsigned int plltmr_reg;
-	unsigned int has_freqband:1;
-	unsigned int has_clklane_stop:1;
-	unsigned int num_clks;
-	unsigned int max_freq;
-	unsigned int wait_for_reset;
-	unsigned int num_bits_resol;
-	unsigned int pll_p_offset;
-	const unsigned int *reg_values;
-};
-
-struct exynos_dsi_plat_data {
-	enum exynos_dsi_type hw_type;
-	const struct exynos_dsim_host_ops *host_ops;
-};
-
 struct exynos_dsi {
-	struct mipi_dsi_host dsi_host;
-	struct drm_bridge bridge;
-	struct drm_bridge *out_bridge;
-	struct device *dev;
-	struct drm_display_mode mode;
-
-	void __iomem *reg_base;
-	struct phy *phy;
-	struct clk **clks;
-	struct regulator_bulk_data supplies[2];
-	int irq;
-	struct gpio_desc *te_gpio;
-
-	u32 pll_clk_rate;
-	u32 burst_clk_rate;
-	u32 esc_clk_rate;
-	u32 lanes;
-	u32 mode_flags;
-	u32 format;
-
-	int state;
-	struct drm_property *brightness;
-	struct completion completed;
-
-	spinlock_t transfer_lock; /* protects transfer_list */
-	struct list_head transfer_list;
-
-	const struct exynos_dsi_driver_data *driver_data;
-	const struct exynos_dsi_plat_data *plat_data;
-
-	void *priv;
-};
-
-struct exynos_dsim_host_ops {
-	int (*register_host)(struct exynos_dsi *dsim);
-	void (*unregister_host)(struct exynos_dsi *dsim);
-	int (*attach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
-	int (*detach)(struct exynos_dsi *dsim, struct mipi_dsi_device *device);
-	irqreturn_t (*te_irq_handler)(struct exynos_dsi *dsim);
-};
-
-struct exynos_dsi_enc {
 	struct drm_encoder encoder;
 };
 
-#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
-
-static inline struct exynos_dsi *bridge_to_dsi(struct drm_bridge *b)
-{
-	return container_of(b, struct exynos_dsi, bridge);
-}
-
-enum reg_idx {
-	DSIM_STATUS_REG,	/* Status register */
-	DSIM_SWRST_REG,		/* Software reset register */
-	DSIM_CLKCTRL_REG,	/* Clock control register */
-	DSIM_TIMEOUT_REG,	/* Time out register */
-	DSIM_CONFIG_REG,	/* Configuration register */
-	DSIM_ESCMODE_REG,	/* Escape mode register */
-	DSIM_MDRESOL_REG,
-	DSIM_MVPORCH_REG,	/* Main display Vporch register */
-	DSIM_MHPORCH_REG,	/* Main display Hporch register */
-	DSIM_MSYNC_REG,		/* Main display sync area register */
-	DSIM_INTSRC_REG,	/* Interrupt source register */
-	DSIM_INTMSK_REG,	/* Interrupt mask register */
-	DSIM_PKTHDR_REG,	/* Packet Header FIFO register */
-	DSIM_PAYLOAD_REG,	/* Payload FIFO register */
-	DSIM_RXFIFO_REG,	/* Read FIFO register */
-	DSIM_FIFOCTRL_REG,	/* FIFO status and control register */
-	DSIM_PLLCTRL_REG,	/* PLL control register */
-	DSIM_PHYCTRL_REG,
-	DSIM_PHYTIMING_REG,
-	DSIM_PHYTIMING1_REG,
-	DSIM_PHYTIMING2_REG,
-	NUM_REGS
-};
-
-static inline void exynos_dsi_write(struct exynos_dsi *dsi, enum reg_idx idx,
-				    u32 val)
-{
-
-	writel(val, dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
-}
-
-static inline u32 exynos_dsi_read(struct exynos_dsi *dsi, enum reg_idx idx)
-{
-	return readl(dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
-}
-
-static const unsigned int exynos_reg_ofs[] = {
-	[DSIM_STATUS_REG] =  0x00,
-	[DSIM_SWRST_REG] =  0x04,
-	[DSIM_CLKCTRL_REG] =  0x08,
-	[DSIM_TIMEOUT_REG] =  0x0c,
-	[DSIM_CONFIG_REG] =  0x10,
-	[DSIM_ESCMODE_REG] =  0x14,
-	[DSIM_MDRESOL_REG] =  0x18,
-	[DSIM_MVPORCH_REG] =  0x1c,
-	[DSIM_MHPORCH_REG] =  0x20,
-	[DSIM_MSYNC_REG] =  0x24,
-	[DSIM_INTSRC_REG] =  0x2c,
-	[DSIM_INTMSK_REG] =  0x30,
-	[DSIM_PKTHDR_REG] =  0x34,
-	[DSIM_PAYLOAD_REG] =  0x38,
-	[DSIM_RXFIFO_REG] =  0x3c,
-	[DSIM_FIFOCTRL_REG] =  0x44,
-	[DSIM_PLLCTRL_REG] =  0x4c,
-	[DSIM_PHYCTRL_REG] =  0x5c,
-	[DSIM_PHYTIMING_REG] =  0x64,
-	[DSIM_PHYTIMING1_REG] =  0x68,
-	[DSIM_PHYTIMING2_REG] =  0x6c,
-};
-
-static const unsigned int exynos5433_reg_ofs[] = {
-	[DSIM_STATUS_REG] = 0x04,
-	[DSIM_SWRST_REG] = 0x0C,
-	[DSIM_CLKCTRL_REG] = 0x10,
-	[DSIM_TIMEOUT_REG] = 0x14,
-	[DSIM_CONFIG_REG] = 0x18,
-	[DSIM_ESCMODE_REG] = 0x1C,
-	[DSIM_MDRESOL_REG] = 0x20,
-	[DSIM_MVPORCH_REG] = 0x24,
-	[DSIM_MHPORCH_REG] = 0x28,
-	[DSIM_MSYNC_REG] = 0x2C,
-	[DSIM_INTSRC_REG] = 0x34,
-	[DSIM_INTMSK_REG] = 0x38,
-	[DSIM_PKTHDR_REG] = 0x3C,
-	[DSIM_PAYLOAD_REG] = 0x40,
-	[DSIM_RXFIFO_REG] = 0x44,
-	[DSIM_FIFOCTRL_REG] = 0x4C,
-	[DSIM_PLLCTRL_REG] = 0x94,
-	[DSIM_PHYCTRL_REG] = 0xA4,
-	[DSIM_PHYTIMING_REG] = 0xB4,
-	[DSIM_PHYTIMING1_REG] = 0xB8,
-	[DSIM_PHYTIMING2_REG] = 0xBC,
-};
-
-enum reg_value_idx {
-	RESET_TYPE,
-	PLL_TIMER,
-	STOP_STATE_CNT,
-	PHYCTRL_ULPS_EXIT,
-	PHYCTRL_VREG_LP,
-	PHYCTRL_SLEW_UP,
-	PHYTIMING_LPX,
-	PHYTIMING_HS_EXIT,
-	PHYTIMING_CLK_PREPARE,
-	PHYTIMING_CLK_ZERO,
-	PHYTIMING_CLK_POST,
-	PHYTIMING_CLK_TRAIL,
-	PHYTIMING_HS_PREPARE,
-	PHYTIMING_HS_ZERO,
-	PHYTIMING_HS_TRAIL
-};
-
-static const unsigned int reg_values[] = {
-	[RESET_TYPE] = DSIM_SWRST,
-	[PLL_TIMER] = 500,
-	[STOP_STATE_CNT] = 0xf,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
-	[PHYCTRL_VREG_LP] = 0,
-	[PHYCTRL_SLEW_UP] = 0,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
-};
-
-static const unsigned int exynos5422_reg_values[] = {
-	[RESET_TYPE] = DSIM_SWRST,
-	[PLL_TIMER] = 500,
-	[STOP_STATE_CNT] = 0xf,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
-	[PHYCTRL_VREG_LP] = 0,
-	[PHYCTRL_SLEW_UP] = 0,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
-};
-
-static const unsigned int exynos5433_reg_values[] = {
-	[RESET_TYPE] = DSIM_FUNCRST,
-	[PLL_TIMER] = 22200,
-	[STOP_STATE_CNT] = 0xa,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
-	[PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
-	[PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
-};
-
-static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x50,
-	.has_freqband = 1,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.pll_p_offset = 13,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x50,
-	.has_freqband = 1,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.pll_p_offset = 13,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x58,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.pll_p_offset = 13,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
-	.reg_ofs = exynos5433_reg_ofs,
-	.plltmr_reg = 0xa0,
-	.has_clklane_stop = 1,
-	.num_clks = 5,
-	.max_freq = 1500,
-	.wait_for_reset = 0,
-	.num_bits_resol = 12,
-	.pll_p_offset = 13,
-	.reg_values = exynos5433_reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
-	.reg_ofs = exynos5433_reg_ofs,
-	.plltmr_reg = 0xa0,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1500,
-	.wait_for_reset = 1,
-	.num_bits_resol = 12,
-	.pll_p_offset = 13,
-	.reg_values = exynos5422_reg_values,
-};
-
-static const struct exynos_dsi_driver_data *
-exynos_dsi_types[DSIM_TYPE_COUNT] = {
-	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
-	[DSIM_TYPE_EXYNOS4210] = &exynos4_dsi_driver_data,
-	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
-	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
-	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
-};
-
-static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
-{
-	if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
-		return;
-
-	dev_err(dsi->dev, "timeout waiting for reset\n");
-}
-
-static void exynos_dsi_reset(struct exynos_dsi *dsi)
-{
-	u32 reset_val = dsi->driver_data->reg_values[RESET_TYPE];
-
-	reinit_completion(&dsi->completed);
-	exynos_dsi_write(dsi, DSIM_SWRST_REG, reset_val);
-}
-
-#ifndef MHZ
-#define MHZ	(1000*1000)
-#endif
-
-static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
-		unsigned long fin, unsigned long fout, u8 *p, u16 *m, u8 *s)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	unsigned long best_freq = 0;
-	u32 min_delta = 0xffffffff;
-	u8 p_min, p_max;
-	u8 _p, best_p;
-	u16 _m, best_m;
-	u8 _s, best_s;
-
-	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
-	p_max = fin / (6 * MHZ);
-
-	for (_p = p_min; _p <= p_max; ++_p) {
-		for (_s = 0; _s <= 5; ++_s) {
-			u64 tmp;
-			u32 delta;
-
-			tmp = (u64)fout * (_p << _s);
-			do_div(tmp, fin);
-			_m = tmp;
-			if (_m < 41 || _m > 125)
-				continue;
-
-			tmp = (u64)_m * fin;
-			do_div(tmp, _p);
-			if (tmp < 500 * MHZ ||
-					tmp > driver_data->max_freq * MHZ)
-				continue;
-
-			tmp = (u64)_m * fin;
-			do_div(tmp, _p << _s);
-
-			delta = abs(fout - tmp);
-			if (delta < min_delta) {
-				best_p = _p;
-				best_m = _m;
-				best_s = _s;
-				min_delta = delta;
-				best_freq = tmp;
-			}
-		}
-	}
-
-	if (best_freq) {
-		*p = best_p;
-		*m = best_m;
-		*s = best_s;
-	}
-
-	return best_freq;
-}
-
-static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
-					unsigned long freq)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	unsigned long fin, fout;
-	int timeout;
-	u8 p, s;
-	u16 m;
-	u32 reg;
-
-	fin = dsi->pll_clk_rate;
-	fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
-	if (!fout) {
-		dev_err(dsi->dev,
-			"failed to find PLL PMS for requested frequency\n");
-		return 0;
-	}
-	dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
-
-	writel(driver_data->reg_values[PLL_TIMER],
-			dsi->reg_base + driver_data->plltmr_reg);
-
-	reg = DSIM_PLL_EN | DSIM_PLL_P(p, driver_data->pll_p_offset) |
-	      DSIM_PLL_M(m) | DSIM_PLL_S(s);
-
-	if (driver_data->has_freqband) {
-		static const unsigned long freq_bands[] = {
-			100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
-			270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
-			510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
-			770 * MHZ, 870 * MHZ, 950 * MHZ,
-		};
-		int band;
-
-		for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
-			if (fout < freq_bands[band])
-				break;
-
-		dev_dbg(dsi->dev, "band %d\n", band);
-
-		reg |= DSIM_FREQ_BAND(band);
-	}
-
-	exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
-
-	timeout = 1000;
-	do {
-		if (timeout-- == 0) {
-			dev_err(dsi->dev, "PLL failed to stabilize\n");
-			return 0;
-		}
-		reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
-	} while ((reg & DSIM_PLL_STABLE) == 0);
-
-	return fout;
-}
-
-static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
-{
-	unsigned long hs_clk, byte_clk, esc_clk;
-	unsigned long esc_div;
-	u32 reg;
-
-	hs_clk = exynos_dsi_set_pll(dsi, dsi->burst_clk_rate);
-	if (!hs_clk) {
-		dev_err(dsi->dev, "failed to configure DSI PLL\n");
-		return -EFAULT;
-	}
-
-	byte_clk = hs_clk / 8;
-	esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
-	esc_clk = byte_clk / esc_div;
-
-	if (esc_clk > 20 * MHZ) {
-		++esc_div;
-		esc_clk = byte_clk / esc_div;
-	}
-
-	dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
-		hs_clk, byte_clk, esc_clk);
-
-	reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
-	reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
-			| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
-			| DSIM_BYTE_CLK_SRC_MASK);
-	reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
-			| DSIM_ESC_PRESCALER(esc_div)
-			| DSIM_LANE_ESC_CLK_EN_CLK
-			| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
-			| DSIM_BYTE_CLK_SRC(0)
-			| DSIM_TX_REQUEST_HSCLK;
-	exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
-
-	return 0;
-}
-
-static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	const unsigned int *reg_values = driver_data->reg_values;
-	u32 reg;
-
-	if (driver_data->has_freqband)
-		return;
-
-	/* B D-PHY: D-PHY Master & Slave Analog Block control */
-	reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
-		reg_values[PHYCTRL_SLEW_UP];
-	exynos_dsi_write(dsi, DSIM_PHYCTRL_REG, reg);
-
-	/*
-	 * T LPX: Transmitted length of any Low-Power state period
-	 * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
-	 *	burst
-	 */
-	reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
-	exynos_dsi_write(dsi, DSIM_PHYTIMING_REG, reg);
-
-	/*
-	 * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
-	 *	Line state immediately before the HS-0 Line state starting the
-	 *	HS transmission
-	 * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
-	 *	transmitting the Clock.
-	 * T CLK_POST: Time that the transmitter continues to send HS clock
-	 *	after the last associated Data Lane has transitioned to LP Mode
-	 *	Interval is defined as the period from the end of T HS-TRAIL to
-	 *	the beginning of T CLK-TRAIL
-	 * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
-	 *	the last payload clock bit of a HS transmission burst
-	 */
-	reg = reg_values[PHYTIMING_CLK_PREPARE] |
-		reg_values[PHYTIMING_CLK_ZERO] |
-		reg_values[PHYTIMING_CLK_POST] |
-		reg_values[PHYTIMING_CLK_TRAIL];
-
-	exynos_dsi_write(dsi, DSIM_PHYTIMING1_REG, reg);
-
-	/*
-	 * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
-	 *	Line state immediately before the HS-0 Line state starting the
-	 *	HS transmission
-	 * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
-	 *	transmitting the Sync sequence.
-	 * T HS-TRAIL: Time that the transmitter drives the flipped differential
-	 *	state after last payload data bit of a HS transmission burst
-	 */
-	reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
-		reg_values[PHYTIMING_HS_TRAIL];
-	exynos_dsi_write(dsi, DSIM_PHYTIMING2_REG, reg);
-}
-
-static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
-{
-	u32 reg;
-
-	reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
-	reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
-			| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
-	exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
-
-	reg = exynos_dsi_read(dsi, DSIM_PLLCTRL_REG);
-	reg &= ~DSIM_PLL_EN;
-	exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
-}
-
-static void exynos_dsi_enable_lane(struct exynos_dsi *dsi, u32 lane)
-{
-	u32 reg = exynos_dsi_read(dsi, DSIM_CONFIG_REG);
-	reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
-			DSIM_LANE_EN(lane));
-	exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
-}
-
-static int exynos_dsi_init_link(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int timeout;
-	u32 reg;
-	u32 lanes_mask;
-
-	/* Initialize FIFO pointers */
-	reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
-	reg &= ~0x1f;
-	exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
-
-	usleep_range(9000, 11000);
-
-	reg |= 0x1f;
-	exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
-	usleep_range(9000, 11000);
-
-	/* DSI configuration */
-	reg = 0;
-
-	/*
-	 * The first bit of mode_flags specifies display configuration.
-	 * If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
-	 * mode, otherwise it will support command mode.
-	 */
-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-		reg |= DSIM_VIDEO_MODE;
-
-		/*
-		 * The user manual describes that following bits are ignored in
-		 * command mode.
-		 */
-		if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
-			reg |= DSIM_MFLUSH_VS;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
-			reg |= DSIM_SYNC_INFORM;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
-			reg |= DSIM_BURST_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
-			reg |= DSIM_AUTO_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
-			reg |= DSIM_HSE_DISABLE_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP)
-			reg |= DSIM_HFP_DISABLE_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP)
-			reg |= DSIM_HBP_DISABLE_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA)
-			reg |= DSIM_HSA_DISABLE_MODE;
-	}
-
-	if (dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET)
-		reg |= DSIM_EOT_DISABLE;
-
-	switch (dsi->format) {
-	case MIPI_DSI_FMT_RGB888:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
-		break;
-	case MIPI_DSI_FMT_RGB666:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
-		break;
-	case MIPI_DSI_FMT_RGB666_PACKED:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
-		break;
-	case MIPI_DSI_FMT_RGB565:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
-		break;
-	default:
-		dev_err(dsi->dev, "invalid pixel format\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Use non-continuous clock mode if the periparal wants and
-	 * host controller supports
-	 *
-	 * In non-continous clock mode, host controller will turn off
-	 * the HS clock between high-speed transmissions to reduce
-	 * power consumption.
-	 */
-	if (driver_data->has_clklane_stop &&
-			dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
-		reg |= DSIM_CLKLANE_STOP;
-	}
-	exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
-
-	lanes_mask = BIT(dsi->lanes) - 1;
-	exynos_dsi_enable_lane(dsi, lanes_mask);
-
-	/* Check clock and data lane state are stop state */
-	timeout = 100;
-	do {
-		if (timeout-- == 0) {
-			dev_err(dsi->dev, "waiting for bus lanes timed out\n");
-			return -EFAULT;
-		}
-
-		reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
-		if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
-		    != DSIM_STOP_STATE_DAT(lanes_mask))
-			continue;
-	} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
-
-	reg = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-	reg &= ~DSIM_STOP_STATE_CNT_MASK;
-	reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, reg);
-
-	reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
-	exynos_dsi_write(dsi, DSIM_TIMEOUT_REG, reg);
-
-	return 0;
-}
-
-static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
-{
-	struct drm_display_mode *m = &dsi->mode;
-	unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
-	u32 reg;
-
-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-		reg = DSIM_CMD_ALLOW(0xf)
-			| DSIM_STABLE_VFP(m->vsync_start - m->vdisplay)
-			| DSIM_MAIN_VBP(m->vtotal - m->vsync_end);
-		exynos_dsi_write(dsi, DSIM_MVPORCH_REG, reg);
-
-		reg = DSIM_MAIN_HFP(m->hsync_start - m->hdisplay)
-			| DSIM_MAIN_HBP(m->htotal - m->hsync_end);
-		exynos_dsi_write(dsi, DSIM_MHPORCH_REG, reg);
-
-		reg = DSIM_MAIN_VSA(m->vsync_end - m->vsync_start)
-			| DSIM_MAIN_HSA(m->hsync_end - m->hsync_start);
-		exynos_dsi_write(dsi, DSIM_MSYNC_REG, reg);
-	}
-	reg =  DSIM_MAIN_HRESOL(m->hdisplay, num_bits_resol) |
-		DSIM_MAIN_VRESOL(m->vdisplay, num_bits_resol);
-
-	exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
-
-	dev_dbg(dsi->dev, "LCD size = %dx%d\n", m->hdisplay, m->vdisplay);
-}
-
-static void exynos_dsi_set_display_enable(struct exynos_dsi *dsi, bool enable)
-{
-	u32 reg;
-
-	reg = exynos_dsi_read(dsi, DSIM_MDRESOL_REG);
-	if (enable)
-		reg |= DSIM_MAIN_STAND_BY;
-	else
-		reg &= ~DSIM_MAIN_STAND_BY;
-	exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
-}
-
-static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
-{
-	int timeout = 2000;
-
-	do {
-		u32 reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
-
-		if (!(reg & DSIM_SFR_HEADER_FULL))
-			return 0;
-
-		if (!cond_resched())
-			usleep_range(950, 1050);
-	} while (--timeout);
-
-	return -ETIMEDOUT;
-}
-
-static void exynos_dsi_set_cmd_lpm(struct exynos_dsi *dsi, bool lpm)
-{
-	u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-
-	if (lpm)
-		v |= DSIM_CMD_LPDT_LP;
-	else
-		v &= ~DSIM_CMD_LPDT_LP;
-
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
-}
-
-static void exynos_dsi_force_bta(struct exynos_dsi *dsi)
-{
-	u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-	v |= DSIM_FORCE_BTA;
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
-}
-
-static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	struct device *dev = dsi->dev;
-	struct mipi_dsi_packet *pkt = &xfer->packet;
-	const u8 *payload = pkt->payload + xfer->tx_done;
-	u16 length = pkt->payload_length - xfer->tx_done;
-	bool first = !xfer->tx_done;
-	u32 reg;
-
-	dev_dbg(dev, "< xfer %pK: tx len %u, done %u, rx len %u, done %u\n",
-		xfer, length, xfer->tx_done, xfer->rx_len, xfer->rx_done);
-
-	if (length > DSI_TX_FIFO_SIZE)
-		length = DSI_TX_FIFO_SIZE;
-
-	xfer->tx_done += length;
-
-	/* Send payload */
-	while (length >= 4) {
-		reg = get_unaligned_le32(payload);
-		exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
-		payload += 4;
-		length -= 4;
-	}
-
-	reg = 0;
-	switch (length) {
-	case 3:
-		reg |= payload[2] << 16;
-		fallthrough;
-	case 2:
-		reg |= payload[1] << 8;
-		fallthrough;
-	case 1:
-		reg |= payload[0];
-		exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
-		break;
-	}
-
-	/* Send packet header */
-	if (!first)
-		return;
-
-	reg = get_unaligned_le32(pkt->header);
-	if (exynos_dsi_wait_for_hdr_fifo(dsi)) {
-		dev_err(dev, "waiting for header FIFO timed out\n");
-		return;
-	}
-
-	if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
-		 dsi->state & DSIM_STATE_CMD_LPM)) {
-		exynos_dsi_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
-		dsi->state ^= DSIM_STATE_CMD_LPM;
-	}
-
-	exynos_dsi_write(dsi, DSIM_PKTHDR_REG, reg);
-
-	if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
-		exynos_dsi_force_bta(dsi);
-}
-
-static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	u8 *payload = xfer->rx_payload + xfer->rx_done;
-	bool first = !xfer->rx_done;
-	struct device *dev = dsi->dev;
-	u16 length;
-	u32 reg;
-
-	if (first) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-
-		switch (reg & 0x3f) {
-		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
-		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
-			if (xfer->rx_len >= 2) {
-				payload[1] = reg >> 16;
-				++xfer->rx_done;
-			}
-			fallthrough;
-		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
-		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
-			payload[0] = reg >> 8;
-			++xfer->rx_done;
-			xfer->rx_len = xfer->rx_done;
-			xfer->result = 0;
-			goto clear_fifo;
-		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
-			dev_err(dev, "DSI Error Report: 0x%04x\n",
-				(reg >> 8) & 0xffff);
-			xfer->result = 0;
-			goto clear_fifo;
-		}
-
-		length = (reg >> 8) & 0xffff;
-		if (length > xfer->rx_len) {
-			dev_err(dev,
-				"response too long (%u > %u bytes), stripping\n",
-				xfer->rx_len, length);
-			length = xfer->rx_len;
-		} else if (length < xfer->rx_len)
-			xfer->rx_len = length;
-	}
-
-	length = xfer->rx_len - xfer->rx_done;
-	xfer->rx_done += length;
-
-	/* Receive payload */
-	while (length >= 4) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		payload[0] = (reg >>  0) & 0xff;
-		payload[1] = (reg >>  8) & 0xff;
-		payload[2] = (reg >> 16) & 0xff;
-		payload[3] = (reg >> 24) & 0xff;
-		payload += 4;
-		length -= 4;
-	}
-
-	if (length) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		switch (length) {
-		case 3:
-			payload[2] = (reg >> 16) & 0xff;
-			fallthrough;
-		case 2:
-			payload[1] = (reg >> 8) & 0xff;
-			fallthrough;
-		case 1:
-			payload[0] = reg & 0xff;
-		}
-	}
-
-	if (xfer->rx_done == xfer->rx_len)
-		xfer->result = 0;
-
-clear_fifo:
-	length = DSI_RX_FIFO_SIZE / 4;
-	do {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		if (reg == DSI_RX_FIFO_EMPTY)
-			break;
-	} while (--length);
-}
-
-static void exynos_dsi_transfer_start(struct exynos_dsi *dsi)
-{
-	unsigned long flags;
-	struct exynos_dsi_transfer *xfer;
-	bool start = false;
-
-again:
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (list_empty(&dsi->transfer_list)) {
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		return;
-	}
-
-	xfer = list_first_entry(&dsi->transfer_list,
-					struct exynos_dsi_transfer, list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (xfer->packet.payload_length &&
-	    xfer->tx_done == xfer->packet.payload_length)
-		/* waiting for RX */
-		return;
-
-	exynos_dsi_send_to_fifo(dsi, xfer);
-
-	if (xfer->packet.payload_length || xfer->rx_len)
-		return;
-
-	xfer->result = 0;
-	complete(&xfer->completed);
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	list_del_init(&xfer->list);
-	start = !list_empty(&dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (start)
-		goto again;
-}
-
-static bool exynos_dsi_transfer_finish(struct exynos_dsi *dsi)
-{
-	struct exynos_dsi_transfer *xfer;
-	unsigned long flags;
-	bool start = true;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (list_empty(&dsi->transfer_list)) {
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		return false;
-	}
-
-	xfer = list_first_entry(&dsi->transfer_list,
-					struct exynos_dsi_transfer, list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	dev_dbg(dsi->dev,
-		"> xfer %pK, tx_len %zu, tx_done %u, rx_len %u, rx_done %u\n",
-		xfer, xfer->packet.payload_length, xfer->tx_done, xfer->rx_len,
-		xfer->rx_done);
-
-	if (xfer->tx_done != xfer->packet.payload_length)
-		return true;
-
-	if (xfer->rx_done != xfer->rx_len)
-		exynos_dsi_read_from_fifo(dsi, xfer);
-
-	if (xfer->rx_done != xfer->rx_len)
-		return true;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	list_del_init(&xfer->list);
-	start = !list_empty(&dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (!xfer->rx_len)
-		xfer->result = 0;
-	complete(&xfer->completed);
-
-	return start;
-}
-
-static void exynos_dsi_remove_transfer(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
+static irqreturn_t exynos_dsi_te_irq_handler(struct samsung_dsim *dsim)
 {
-	unsigned long flags;
-	bool start;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (!list_empty(&dsi->transfer_list) &&
-	    xfer == list_first_entry(&dsi->transfer_list,
-				     struct exynos_dsi_transfer, list)) {
-		list_del_init(&xfer->list);
-		start = !list_empty(&dsi->transfer_list);
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		if (start)
-			exynos_dsi_transfer_start(dsi);
-		return;
-	}
-
-	list_del_init(&xfer->list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-}
-
-static int exynos_dsi_transfer(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	unsigned long flags;
-	bool stopped;
-
-	xfer->tx_done = 0;
-	xfer->rx_done = 0;
-	xfer->result = -ETIMEDOUT;
-	init_completion(&xfer->completed);
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	stopped = list_empty(&dsi->transfer_list);
-	list_add_tail(&xfer->list, &dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (stopped)
-		exynos_dsi_transfer_start(dsi);
-
-	wait_for_completion_timeout(&xfer->completed,
-				    msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
-	if (xfer->result == -ETIMEDOUT) {
-		struct mipi_dsi_packet *pkt = &xfer->packet;
-		exynos_dsi_remove_transfer(dsi, xfer);
-		dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 4, pkt->header,
-			(int)pkt->payload_length, pkt->payload);
-		return -ETIMEDOUT;
-	}
-
-	/* Also covers hardware timeout condition */
-	return xfer->result;
-}
-
-static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
-{
-	struct exynos_dsi *dsi = dev_id;
-	u32 status;
-
-	status = exynos_dsi_read(dsi, DSIM_INTSRC_REG);
-	if (!status) {
-		static unsigned long int j;
-		if (printk_timed_ratelimit(&j, 500))
-			dev_warn(dsi->dev, "spurious interrupt\n");
-		return IRQ_HANDLED;
-	}
-	exynos_dsi_write(dsi, DSIM_INTSRC_REG, status);
-
-	if (status & DSIM_INT_SW_RST_RELEASE) {
-		u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
-			DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_RX_ECC_ERR |
-			DSIM_INT_SW_RST_RELEASE);
-		exynos_dsi_write(dsi, DSIM_INTMSK_REG, mask);
-		complete(&dsi->completed);
-		return IRQ_HANDLED;
-	}
-
-	if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
-			DSIM_INT_PLL_STABLE)))
-		return IRQ_HANDLED;
-
-	if (exynos_dsi_transfer_finish(dsi))
-		exynos_dsi_transfer_start(dsi);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
-{
-	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
-	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
-
-	if (pdata->host_ops && pdata->host_ops->te_irq_handler)
-		return pdata->host_ops->te_irq_handler(dsi);
-
-	return IRQ_HANDLED;
-}
-
-static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
-{
-	enable_irq(dsi->irq);
-
-	if (dsi->te_gpio)
-		enable_irq(gpiod_to_irq(dsi->te_gpio));
-}
-
-static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
-{
-	if (dsi->te_gpio)
-		disable_irq(gpiod_to_irq(dsi->te_gpio));
-
-	disable_irq(dsi->irq);
-}
-
-static int exynos_dsi_init(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-
-	if (dsi->state & DSIM_STATE_INITIALIZED)
-		return 0;
-
-	exynos_dsi_reset(dsi);
-	exynos_dsi_enable_irq(dsi);
-
-	if (driver_data->reg_values[RESET_TYPE] == DSIM_FUNCRST)
-		exynos_dsi_enable_lane(dsi, BIT(dsi->lanes) - 1);
-
-	exynos_dsi_enable_clock(dsi);
-	if (driver_data->wait_for_reset)
-		exynos_dsi_wait_for_reset(dsi);
-	exynos_dsi_set_phy_ctrl(dsi);
-	exynos_dsi_init_link(dsi);
-
-	dsi->state |= DSIM_STATE_INITIALIZED;
-
-	return 0;
-}
-
-static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
-				      struct device *panel)
-{
-	int ret;
-	int te_gpio_irq;
-
-	dsi->te_gpio = gpiod_get_optional(panel, "te", GPIOD_IN);
-	if (!dsi->te_gpio) {
-		return 0;
-	} else if (IS_ERR(dsi->te_gpio)) {
-		dev_err(dsi->dev, "gpio request failed with %ld\n",
-				PTR_ERR(dsi->te_gpio));
-		return PTR_ERR(dsi->te_gpio);
-	}
-
-	te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
-
-	ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
-				   IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, "TE", dsi);
-	if (ret) {
-		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
-		gpiod_put(dsi->te_gpio);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
-{
-	if (dsi->te_gpio) {
-		free_irq(gpiod_to_irq(dsi->te_gpio), dsi);
-		gpiod_put(dsi->te_gpio);
-	}
-}
-
-static void exynos_dsi_atomic_pre_enable(struct drm_bridge *bridge,
-					 struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-	int ret;
-
-	if (dsi->state & DSIM_STATE_ENABLED)
-		return;
-
-	ret = pm_runtime_resume_and_get(dsi->dev);
-	if (ret < 0) {
-		dev_err(dsi->dev, "failed to enable DSI device.\n");
-		return;
-	}
-
-	dsi->state |= DSIM_STATE_ENABLED;
-
-	/*
-	 * For Exynos-DSIM the downstream bridge, or panel are expecting
-	 * the host initialization during DSI transfer.
-	 */
-	if (!exynos_dsi_hw_is_exynos(dsi->plat_data->hw_type)) {
-		ret = exynos_dsi_init(dsi);
-		if (ret)
-			return;
-	}
-}
-
-static void exynos_dsi_atomic_enable(struct drm_bridge *bridge,
-				     struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	exynos_dsi_set_display_mode(dsi);
-	exynos_dsi_set_display_enable(dsi, true);
-
-	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
-
-	return;
-}
-
-static void exynos_dsi_atomic_disable(struct drm_bridge *bridge,
-				      struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	if (!(dsi->state & DSIM_STATE_ENABLED))
-		return;
-
-	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
-}
-
-static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
-					   struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	exynos_dsi_set_display_enable(dsi, false);
-
-	dsi->state &= ~DSIM_STATE_ENABLED;
-	pm_runtime_put_sync(dsi->dev);
-}
-
-/*
- * This pixel output formats list referenced from,
- * AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
- * 3.7.4 Pixel formats
- * Table 14. DSI pixel packing formats
- */
-static const u32 exynos_dsi_pixel_output_fmts[] = {
-	MEDIA_BUS_FMT_YUYV10_1X20,
-	MEDIA_BUS_FMT_YUYV12_1X24,
-	MEDIA_BUS_FMT_UYVY8_1X16,
-	MEDIA_BUS_FMT_RGB101010_1X30,
-	MEDIA_BUS_FMT_RGB121212_1X36,
-	MEDIA_BUS_FMT_RGB565_1X16,
-	MEDIA_BUS_FMT_RGB666_1X18,
-	MEDIA_BUS_FMT_RGB888_1X24,
-};
-
-static bool exynos_dsi_pixel_output_fmt_supported(u32 fmt)
-{
-	int i;
-
-	if (fmt == MEDIA_BUS_FMT_FIXED)
-		return false;
-
-	for (i = 0; i < ARRAY_SIZE(exynos_dsi_pixel_output_fmts); i++) {
-		if (exynos_dsi_pixel_output_fmts[i] == fmt)
-			return true;
-	}
-
-	return false;
-}
-
-static u32 *
-exynos_dsi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
-				     struct drm_bridge_state *bridge_state,
-				     struct drm_crtc_state *crtc_state,
-				     struct drm_connector_state *conn_state,
-				     u32 output_fmt,
-				     unsigned int *num_input_fmts)
-{
-	u32 *input_fmts;
-
-	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
-	if (!input_fmts)
-		return NULL;
-
-	if (!exynos_dsi_pixel_output_fmt_supported(output_fmt))
-		/*
-		 * Some bridge/display drivers are still not able to pass the
-		 * correct format, so handle those pipelines by falling back
-		 * to the default format till the supported formats finalized.
-		 */
-		output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
-
-	input_fmts[0] = output_fmt;
-	*num_input_fmts = 1;
-
-	return input_fmts;
-}
-
-static int exynos_dsi_atomic_check(struct drm_bridge *bridge,
-				   struct drm_bridge_state *bridge_state,
-				   struct drm_crtc_state *crtc_state,
-				   struct drm_connector_state *conn_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-
-	/*
-	 * The i.MX8M Mini/Nano glue logic between LCDIF and DSIM
-	 * inverts HS/VS/DE sync signals polarity, therefore, while
-	 * i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
-	 * 13.6.3.5.2 RGB interface
-	 * i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
-	 * 13.6.2.7.2 RGB interface
-	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
-	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
-	 */
-	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
-		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
-		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
-	}
-
-	return 0;
-}
-
-static void exynos_dsi_mode_set(struct drm_bridge *bridge,
-				const struct drm_display_mode *mode,
-				const struct drm_display_mode *adjusted_mode)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	drm_mode_copy(&dsi->mode, adjusted_mode);
-}
-
-static int exynos_dsi_attach(struct drm_bridge *bridge,
-			     enum drm_bridge_attach_flags flags)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge,
-				 flags);
-}
-
-static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
-	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
-	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
-	.atomic_reset			= drm_atomic_helper_bridge_reset,
-	.atomic_get_input_bus_fmts	= exynos_dsi_atomic_get_input_bus_fmts,
-	.atomic_check			= exynos_dsi_atomic_check,
-	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
-	.atomic_enable			= exynos_dsi_atomic_enable,
-	.atomic_disable			= exynos_dsi_atomic_disable,
-	.atomic_post_disable		= exynos_dsi_atomic_post_disable,
-	.mode_set			= exynos_dsi_mode_set,
-	.attach				= exynos_dsi_attach,
-};
-
-static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
-				  struct mipi_dsi_device *device)
-{
-	struct exynos_dsi *dsi = host_to_dsi(host);
-	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
-	struct device *dev = dsi->dev;
-	struct device_node *np = dev->of_node;
-	struct device_node *remote;
-	struct drm_panel *panel;
-	int ret;
-
-	/**
-	 * Devices can also be child nodes when we also control that device
-	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
-	 *
-	 * Lookup for a child node of the given parent that isn't either port
-	 * or ports.
-	 */
-	for_each_available_child_of_node(np, remote) {
-		if (of_node_name_eq(remote, "port") ||
-		    of_node_name_eq(remote, "ports"))
-			continue;
-
-		goto of_find_panel_or_bridge;
-	}
-
-	/*
-	 * of_graph_get_remote_node() produces a noisy error message if port
-	 * node isn't found and the absence of the port is a legit case here,
-	 * so at first we silently check whether graph presents in the
-	 * device-tree node.
-	 */
-	if (!of_graph_is_present(np))
-		return -ENODEV;
-
-	remote = of_graph_get_remote_node(np, 1, 0);
-
-of_find_panel_or_bridge:
-	if (!remote)
-		return -ENODEV;
-
-	panel = of_drm_find_panel(remote);
-	if (!IS_ERR(panel)) {
-		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
-	} else {
-		dsi->out_bridge = of_drm_find_bridge(remote);
-		if (!dsi->out_bridge)
-			dsi->out_bridge = ERR_PTR(-EINVAL);
-	}
-
-	of_node_put(remote);
-
-	if (IS_ERR(dsi->out_bridge)) {
-		ret = PTR_ERR(dsi->out_bridge);
-		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
-		return ret;
-	}
-
-	DRM_DEV_INFO(dev, "Attached %s device\n", device->name);
-
-	drm_bridge_add(&dsi->bridge);
-
-	if (pdata->host_ops && pdata->host_ops->attach) {
-		ret = pdata->host_ops->attach(dsi, device);
-		if (ret < 0)
-			return ret;
-	}
-
-	dsi->lanes = device->lanes;
-	dsi->format = device->format;
-	dsi->mode_flags = device->mode_flags;
-
-	return 0;
-}
-
-static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
-				  struct mipi_dsi_device *device)
-{
-	struct exynos_dsi *dsi = host_to_dsi(host);
-	const struct exynos_dsi_plat_data *pdata = dsi->plat_data;
-	int ret;
-
-	dsi->out_bridge = NULL;
-
-	if (pdata->host_ops && pdata->host_ops->detach) {
-		ret = pdata->host_ops->detach(dsi, device);
-		if (ret < 0)
-			return ret;
-	}
-
-	drm_bridge_remove(&dsi->bridge);
-
-	return 0;
-}
-
-static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
-					 const struct mipi_dsi_msg *msg)
-{
-	struct exynos_dsi *dsi = host_to_dsi(host);
-	struct exynos_dsi_transfer xfer;
-	int ret;
-
-	if (!(dsi->state & DSIM_STATE_ENABLED))
-		return -EINVAL;
-
-	ret = exynos_dsi_init(dsi);
-	if (ret)
-		return ret;
-
-	ret = mipi_dsi_create_packet(&xfer.packet, msg);
-	if (ret < 0)
-		return ret;
-
-	xfer.rx_len = msg->rx_len;
-	xfer.rx_payload = msg->rx_buf;
-	xfer.flags = msg->flags;
-
-	ret = exynos_dsi_transfer(dsi, &xfer);
-	return (ret < 0) ? ret : xfer.rx_done;
-}
-
-static const struct mipi_dsi_host_ops exynos_dsi_ops = {
-	.attach = exynos_dsi_host_attach,
-	.detach = exynos_dsi_host_detach,
-	.transfer = exynos_dsi_host_transfer,
-};
-
-static int exynos_dsi_of_read_u32(const struct device_node *np,
-				  const char *propname, u32 *out_value)
-{
-	int ret = of_property_read_u32(np, propname, out_value);
-
-	if (ret < 0)
-		pr_err("%pOF: failed to get '%s' property\n", np, propname);
-
-	return ret;
-}
-
-static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
-{
-	struct device *dev = dsi->dev;
-	struct device_node *node = dev->of_node;
-	int ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,pll-clock-frequency",
-				     &dsi->pll_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,burst-clock-frequency",
-				     &dsi->burst_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,esc-clock-frequency",
-				     &dsi->esc_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static irqreturn_t exynos_dsim_te_irq_handler(struct exynos_dsi *dsim)
-{
-	struct exynos_dsi_enc *dsi_enc = dsim->priv;
-	struct drm_encoder *encoder = &dsi_enc->encoder;
+	struct exynos_dsi *dsi = dsim->priv;
+	struct drm_encoder *encoder = &dsi->encoder;
 
 	if (dsim->state & DSIM_STATE_VIDOUT_AVAILABLE)
 		exynos_drm_crtc_te_handler(encoder->crtc);
@@ -1772,31 +32,18 @@ static irqreturn_t exynos_dsim_te_irq_handler(struct exynos_dsi *dsim)
 	return IRQ_HANDLED;
 }
 
-static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
+static void exynos_dsi_host_attach(struct samsung_dsim *dsim,
 				   struct mipi_dsi_device *device)
 {
-	struct exynos_dsi_enc *dsi_enc = dsim->priv;
-	struct drm_encoder *encoder = &dsi_enc->encoder;
+	struct exynos_dsi *dsi = dsim->priv;
+	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm = encoder->dev;
-	int ret;
 
 	drm_bridge_attach(encoder, &dsim->bridge,
 			  list_first_entry_or_null(&encoder->bridge_chain,
 						   struct drm_bridge,
 						   chain_node), 0);
 
-	/*
-	 * This is a temporary solution and should be made by more generic way.
-	 *
-	 * If attached panel device is for command mode one, dsi should register
-	 * TE interrupt handler.
-	 */
-	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
-		ret = exynos_dsi_register_te_irq(dsim, &device->dev);
-		if (ret)
-			return ret;
-	}
-
 	mutex_lock(&drm->mode_config.mutex);
 
 	dsim->lanes = device->lanes;
@@ -1809,30 +56,23 @@ static int exynos_dsim_host_attach(struct exynos_dsi *dsim,
 
 	if (drm->mode_config.poll_enabled)
 		drm_kms_helper_hotplug_event(drm);
-
-	return 0;
 }
 
-static int exynos_dsim_host_detach(struct exynos_dsi *dsim,
+static void exynos_dsi_host_detach(struct samsung_dsim *dsim,
 				   struct mipi_dsi_device *device)
 {
-	struct exynos_dsi_enc *dsi_enc = dsim->priv;
-	struct drm_device *drm = dsi_enc->encoder.dev;
+	struct exynos_dsi *dsi = dsim->priv;
+	struct drm_device *drm = dsi->encoder.dev;
 
 	if (drm->mode_config.poll_enabled)
 		drm_kms_helper_hotplug_event(drm);
-
-	exynos_dsi_unregister_te_irq(dsim);
-
-	return 0;
 }
 
-static int exynos_dsi_bind(struct device *dev, struct device *master,
-				void *data)
+static int exynos_dsi_bind(struct device *dev, struct device *master, void *data)
 {
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	struct exynos_dsi_enc *dsi_enc = dsi->priv;
-	struct drm_encoder *encoder = &dsi_enc->encoder;
+	struct samsung_dsim *dsim = dev_get_drvdata(dev);
+	struct exynos_dsi *dsi = dsim->priv;
+	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm_dev = data;
 	int ret;
 
@@ -1842,17 +82,16 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
 	if (ret < 0)
 		return ret;
 
-	return mipi_dsi_host_register(&dsi->dsi_host);
+	return mipi_dsi_host_register(&dsim->dsi_host);
 }
 
-static void exynos_dsi_unbind(struct device *dev, struct device *master,
-				void *data)
+static void exynos_dsi_unbind(struct device *dev, struct device *master, void *data)
 {
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
+	struct samsung_dsim *dsim = dev_get_drvdata(dev);
 
-	dsi->bridge.funcs->atomic_disable(&dsi->bridge, NULL);
+	dsim->bridge.funcs->atomic_disable(&dsim->bridge, NULL);
 
-	mipi_dsi_host_unregister(&dsi->dsi_host);
+	mipi_dsi_host_unregister(&dsim->dsi_host);
 }
 
 static const struct component_ops exynos_dsi_component_ops = {
@@ -1860,258 +99,56 @@ static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
-static int exynos_dsi_register_host(struct exynos_dsi *dsim)
+static int exynos_dsi_register_host(struct samsung_dsim *dsim)
 {
-	struct exynos_dsi_enc *dsi_enc;
+	struct exynos_dsi *dsi;
 
-	dsi_enc = devm_kzalloc(dsim->dev, sizeof(*dsi_enc), GFP_KERNEL);
-	if (!dsi_enc)
+	dsi = devm_kzalloc(dsim->dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
 		return -ENOMEM;
 
-	dsim->priv = dsi_enc;
+	dsim->priv = dsi;
 	dsim->bridge.pre_enable_prev_first = true;
 
 	return component_add(dsim->dev, &exynos_dsi_component_ops);
 }
 
-static void exynos_dsi_unregister_host(struct exynos_dsi *dsim)
+static void exynos_dsi_unregister_host(struct samsung_dsim *dsim)
 {
 	component_del(dsim->dev, &exynos_dsi_component_ops);
 }
 
-static int generic_dsim_register_host(struct exynos_dsi *dsim)
-{
-	return mipi_dsi_host_register(&dsim->dsi_host);
-}
-
-static void generic_dsim_unregister_host(struct exynos_dsi *dsim)
-{
-	mipi_dsi_host_unregister(&dsim->dsi_host);
-}
-
-static const struct exynos_dsim_host_ops generic_dsim_host_ops = {
-	.register_host = generic_dsim_register_host,
-	.unregister_host = generic_dsim_unregister_host,
-};
-
-static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
-	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
-};
-
-static int exynos_dsi_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct exynos_dsi *dsi;
-	int ret, i;
-
-	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
-	if (!dsi)
-		return -ENOMEM;
-
-	init_completion(&dsi->completed);
-	spin_lock_init(&dsi->transfer_lock);
-	INIT_LIST_HEAD(&dsi->transfer_list);
-
-	dsi->dsi_host.ops = &exynos_dsi_ops;
-	dsi->dsi_host.dev = dev;
-
-	dsi->dev = dev;
-	dsi->plat_data = of_device_get_match_data(dev);
-	dsi->driver_data = exynos_dsi_types[dsi->plat_data->hw_type];
-
-	dsi->supplies[0].supply = "vddcore";
-	dsi->supplies[1].supply = "vddio";
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
-				      dsi->supplies);
-	if (ret)
-		return dev_err_probe(dev, ret, "failed to get regulators\n");
-
-	dsi->clks = devm_kcalloc(dev,
-			dsi->driver_data->num_clks, sizeof(*dsi->clks),
-			GFP_KERNEL);
-	if (!dsi->clks)
-		return -ENOMEM;
-
-	for (i = 0; i < dsi->driver_data->num_clks; i++) {
-		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
-		if (IS_ERR(dsi->clks[i])) {
-			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
-				dsi->clks[i] = devm_clk_get(dev,
-							OLD_SCLK_MIPI_CLK_NAME);
-				if (!IS_ERR(dsi->clks[i]))
-					continue;
-			}
-
-			dev_info(dev, "failed to get the clock: %s\n",
-					clk_names[i]);
-			return PTR_ERR(dsi->clks[i]);
-		}
-	}
-
-	dsi->reg_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(dsi->reg_base))
-		return PTR_ERR(dsi->reg_base);
-
-	dsi->phy = devm_phy_optional_get(dev, "dsim");
-	if (IS_ERR(dsi->phy)) {
-		dev_info(dev, "failed to get dsim phy\n");
-		return PTR_ERR(dsi->phy);
-	}
-
-	dsi->irq = platform_get_irq(pdev, 0);
-	if (dsi->irq < 0)
-		return dsi->irq;
-
-	ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
-					exynos_dsi_irq,
-					IRQF_ONESHOT | IRQF_NO_AUTOEN,
-					dev_name(dev), dsi);
-	if (ret) {
-		dev_err(dev, "failed to request dsi irq\n");
-		return ret;
-	}
-
-	ret = exynos_dsi_parse_dt(dsi);
-	if (ret)
-		return ret;
-
-	platform_set_drvdata(pdev, dsi);
-
-	pm_runtime_enable(dev);
-
-	dsi->bridge.funcs = &exynos_dsi_bridge_funcs;
-	dsi->bridge.of_node = dev->of_node;
-	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
-	dsi->bridge.pre_enable_prev_first = true;
-
-	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
-	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
-		dsi->bridge.timings = &dsim_bridge_timings_de_low;
-
-	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
-		ret = dsi->plat_data->host_ops->register_host(dsi);
-
-	if (ret)
-		goto err_disable_runtime;
-
-	return 0;
-
-err_disable_runtime:
-	pm_runtime_disable(dev);
-
-	return ret;
-}
-
-static int exynos_dsi_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
-
-	component_del(&pdev->dev, &exynos_dsi_component_ops);
-
-	return 0;
-}
-
-static int __maybe_unused exynos_dsi_suspend(struct device *dev)
-{
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int ret, i;
-
-	usleep_range(10000, 20000);
-
-	if (dsi->state & DSIM_STATE_INITIALIZED) {
-		dsi->state &= ~DSIM_STATE_INITIALIZED;
-
-		exynos_dsi_disable_clock(dsi);
-
-		exynos_dsi_disable_irq(dsi);
-	}
-
-	dsi->state &= ~DSIM_STATE_CMD_LPM;
-
-	phy_power_off(dsi->phy);
-
-	for (i = driver_data->num_clks - 1; i > -1; i--)
-		clk_disable_unprepare(dsi->clks[i]);
-
-	ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-	if (ret < 0)
-		dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
-
-	return 0;
-}
-
-static int __maybe_unused exynos_dsi_resume(struct device *dev)
-{
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int ret, i;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-	if (ret < 0) {
-		dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
-		return ret;
-	}
-
-	for (i = 0; i < driver_data->num_clks; i++) {
-		ret = clk_prepare_enable(dsi->clks[i]);
-		if (ret < 0)
-			goto err_clk;
-	}
-
-	ret = phy_power_on(dsi->phy);
-	if (ret < 0) {
-		dev_err(dsi->dev, "cannot enable phy %d\n", ret);
-		goto err_clk;
-	}
-
-	return 0;
-
-err_clk:
-	while (--i > -1)
-		clk_disable_unprepare(dsi->clks[i]);
-	regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-
-	return ret;
-}
-
-static const struct dev_pm_ops exynos_dsi_pm_ops = {
-	SET_RUNTIME_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
-};
-
-static const struct exynos_dsim_host_ops exynos_dsi_host_ops = {
+static const struct samsung_dsim_host_ops exynos_dsi_exynos_host_ops = {
 	.register_host = exynos_dsi_register_host,
 	.unregister_host = exynos_dsi_unregister_host,
-	.attach = exynos_dsim_host_attach,
-	.detach = exynos_dsim_host_detach,
-	.te_irq_handler = exynos_dsim_te_irq_handler,
+	.attach = exynos_dsi_host_attach,
+	.detach = exynos_dsi_host_detach,
+	.te_irq_handler = exynos_dsi_te_irq_handler,
 };
 
-static const struct exynos_dsi_plat_data exynos3250_dsi_pdata = {
+static const struct samsung_dsim_plat_data exynos3250_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS3250,
-	.host_ops = &exynos_dsi_host_ops,
+	.host_ops = &exynos_dsi_exynos_host_ops,
 };
 
-static const struct exynos_dsi_plat_data exynos4210_dsi_pdata = {
+static const struct samsung_dsim_plat_data exynos4210_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS4210,
-	.host_ops = &exynos_dsi_host_ops,
+	.host_ops = &exynos_dsi_exynos_host_ops,
 };
 
-static const struct exynos_dsi_plat_data exynos5410_dsi_pdata = {
+static const struct samsung_dsim_plat_data exynos5410_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5410,
-	.host_ops = &exynos_dsi_host_ops,
+	.host_ops = &exynos_dsi_exynos_host_ops,
 };
 
-static const struct exynos_dsi_plat_data exynos5422_dsi_pdata = {
+static const struct samsung_dsim_plat_data exynos5422_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5422,
-	.host_ops = &exynos_dsi_host_ops,
+	.host_ops = &exynos_dsi_exynos_host_ops,
 };
 
-static const struct exynos_dsi_plat_data exynos5433_dsi_pdata = {
+static const struct samsung_dsim_plat_data exynos5433_dsi_pdata = {
 	.hw_type = DSIM_TYPE_EXYNOS5433,
-	.host_ops = &exynos_dsi_host_ops,
+	.host_ops = &exynos_dsi_exynos_host_ops,
 };
 
 static const struct of_device_id exynos_dsi_of_match[] = {
@@ -2140,12 +177,12 @@ static const struct of_device_id exynos_dsi_of_match[] = {
 MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
 
 struct platform_driver dsi_driver = {
-	.probe = exynos_dsi_probe,
-	.remove = exynos_dsi_remove,
+	.probe = samsung_dsim_probe,
+	.remove = samsung_dsim_remove,
 	.driver = {
 		   .name = "exynos-dsi",
 		   .owner = THIS_MODULE,
-		   .pm = &exynos_dsi_pm_ops,
+		   .pm = &samsung_dsim_pm_ops,
 		   .of_match_table = exynos_dsi_of_match,
 	},
 };
diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
new file mode 100644
index 000000000000..4ba387c958ae
--- /dev/null
+++ b/include/drm/bridge/samsung-dsim.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#ifndef __SAMSUNG_DSIM__
+#define __SAMSUNG_DSIM__
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_mipi_dsi.h>
+
+struct samsung_dsim;
+
+#define DSIM_STATE_ENABLED		BIT(0)
+#define DSIM_STATE_INITIALIZED		BIT(1)
+#define DSIM_STATE_CMD_LPM		BIT(2)
+#define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
+
+enum samsung_dsim_type {
+	DSIM_TYPE_EXYNOS3250,
+	DSIM_TYPE_EXYNOS4210,
+	DSIM_TYPE_EXYNOS5410,
+	DSIM_TYPE_EXYNOS5422,
+	DSIM_TYPE_EXYNOS5433,
+	DSIM_TYPE_IMX8MM,
+	DSIM_TYPE_COUNT,
+};
+
+#define samsung_dsim_hw_is_exynos(hw) \
+	((hw) >= DSIM_TYPE_EXYNOS3250 && (hw) <= DSIM_TYPE_EXYNOS5433)
+
+struct samsung_dsim_transfer {
+	struct list_head list;
+	struct completion completed;
+	int result;
+	struct mipi_dsi_packet packet;
+	u16 flags;
+	u16 tx_done;
+
+	u8 *rx_payload;
+	u16 rx_len;
+	u16 rx_done;
+};
+
+struct samsung_dsim_driver_data {
+	const unsigned int *reg_ofs;
+	unsigned int plltmr_reg;
+	unsigned int has_freqband:1;
+	unsigned int has_clklane_stop:1;
+	unsigned int num_clks;
+	unsigned int max_freq;
+	unsigned int wait_for_reset;
+	unsigned int num_bits_resol;
+	unsigned int pll_p_offset;
+	const unsigned int *reg_values;
+};
+
+struct samsung_dsim_host_ops {
+	int (*register_host)(struct samsung_dsim *dsim);
+	void (*unregister_host)(struct samsung_dsim *dsim);
+	void (*attach)(struct samsung_dsim *dsim, struct mipi_dsi_device *device);
+	void (*detach)(struct samsung_dsim *dsim, struct mipi_dsi_device *device);
+	irqreturn_t (*te_irq_handler)(struct samsung_dsim *dsim);
+};
+
+struct samsung_dsim_plat_data {
+	enum samsung_dsim_type hw_type;
+	const struct samsung_dsim_host_ops *host_ops;
+};
+
+struct samsung_dsim {
+	struct mipi_dsi_host dsi_host;
+	struct drm_bridge bridge;
+	struct drm_bridge *out_bridge;
+	struct device *dev;
+	struct drm_display_mode mode;
+
+	void __iomem *reg_base;
+	struct phy *phy;
+	struct clk **clks;
+	struct regulator_bulk_data supplies[2];
+	int irq;
+	struct gpio_desc *te_gpio;
+
+	u32 pll_clk_rate;
+	u32 burst_clk_rate;
+	u32 esc_clk_rate;
+	u32 lanes;
+	u32 mode_flags;
+	u32 format;
+
+	int state;
+	struct drm_property *brightness;
+	struct completion completed;
+
+	spinlock_t transfer_lock; /* protects transfer_list */
+	struct list_head transfer_list;
+
+	const struct samsung_dsim_driver_data *driver_data;
+	const struct samsung_dsim_plat_data *plat_data;
+
+	void *priv;
+};
+
+extern int samsung_dsim_probe(struct platform_device *pdev);
+extern int samsung_dsim_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops samsung_dsim_pm_ops;
+
+#endif /* __SAMSUNG_DSIM__ */
-- 
2.25.1

[PATCH v15 13/16] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support

[Jagan Teki]

Samsung MIPI DSIM bridge can also be found in i.MX8M Mini/Nano SoC.

Add dt-bingings for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11, v10, v9:
- none
Changes for v8:
- add comment to include i.MX8M Nano.
Changes for v7, v6, v5, v4:
- none
Changes for v3:
- collect Rob Acked-by
Changes for v2:
- updated comments
Changes for v1:
- new patch

 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index be377786e8cd..5133d4d39190 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -7,6 +7,7 @@ Required properties:
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
+		"fsl,imx8mm-mipi-dsim" /* for i.MX8M Mini/Nano SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
-- 
2.25.1

[PATCH v15 13/16] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support

[Jagan Teki]

Samsung MIPI DSIM bridge can also be found in i.MX8M Mini/Nano SoC.

Add dt-bingings for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11, v10, v9:
- none
Changes for v8:
- add comment to include i.MX8M Nano.
Changes for v7, v6, v5, v4:
- none
Changes for v3:
- collect Rob Acked-by
Changes for v2:
- updated comments
Changes for v1:
- new patch

 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index be377786e8cd..5133d4d39190 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -7,6 +7,7 @@ Required properties:
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
+		"fsl,imx8mm-mipi-dsim" /* for i.MX8M Mini/Nano SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
-- 
2.25.1

[PATCH v15 14/16] drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support

[Jagan Teki]

Samsung MIPI DSIM master can also be found in i.MX8M Mini/Nano SoC.

Add compatible and associated driver_data for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- collect ACK from Robert
Changes for v10, v9:
- none
Changed for v8:
- fix and update the comment
Changes for v7, v6:
- none
Changes for v3:
- enable DSIM_QUIRK_FIXUP_SYNC_POL quirk
Changes for v5:
- [mszyprow] rebased and adjusted to the new driver initialization
- drop quirk
Changes for v4:
- none
Changes for v3:
- enable DSIM_QUIRK_FIXUP_SYNC_POL quirk
Changes for v2:
- collect Laurent r-b
Changes for v1:
- none

 drivers/gpu/drm/bridge/samsung-dsim.c | 44 +++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 42e3536cb2fc..3ffdaedaa261 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -376,6 +376,24 @@ static const unsigned int exynos5433_reg_values[] = {
 	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
 };
 
+static const unsigned int imx8mm_dsim_reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = 0,
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x26),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x08),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
 static const struct samsung_dsim_driver_data exynos3_dsi_driver_data = {
 	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x50,
@@ -437,6 +455,22 @@ static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
 	.reg_values = exynos5422_reg_values,
 };
 
+static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 2100,
+	.wait_for_reset = 0,
+	.num_bits_resol = 12,
+	/*
+	 * Unlike Exynos, PLL_P(PMS_P) offset 14 is used in i.MX8M Mini/Nano/Plus
+	 * downstream driver - drivers/gpu/drm/bridge/sec-dsim.c
+	 */
+	.pll_p_offset = 14,
+	.reg_values = imx8mm_dsim_reg_values,
+};
+
 static const struct samsung_dsim_driver_data *
 samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
@@ -444,6 +478,7 @@ samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
+	[DSIM_TYPE_IMX8MM] = &imx8mm_dsi_driver_data,
 };
 
 static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
@@ -1875,7 +1910,16 @@ const struct dev_pm_ops samsung_dsim_pm_ops = {
 };
 EXPORT_SYMBOL_GPL(samsung_dsim_pm_ops);
 
+static const struct samsung_dsim_plat_data samsung_dsim_imx8mm_pdata = {
+	.hw_type = DSIM_TYPE_IMX8MM,
+	.host_ops = &generic_dsim_host_ops,
+};
+
 static const struct of_device_id samsung_dsim_of_match[] = {
+	{
+		.compatible = "fsl,imx8mm-mipi-dsim",
+		.data = &samsung_dsim_imx8mm_pdata,
+	},
 	{ /* sentinel. */ }
 };
 MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
-- 
2.25.1

[PATCH v15 14/16] drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support

[Jagan Teki]

Samsung MIPI DSIM master can also be found in i.MX8M Mini/Nano SoC.

Add compatible and associated driver_data for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- collect ACK from Robert
Changes for v10, v9:
- none
Changed for v8:
- fix and update the comment
Changes for v7, v6:
- none
Changes for v3:
- enable DSIM_QUIRK_FIXUP_SYNC_POL quirk
Changes for v5:
- [mszyprow] rebased and adjusted to the new driver initialization
- drop quirk
Changes for v4:
- none
Changes for v3:
- enable DSIM_QUIRK_FIXUP_SYNC_POL quirk
Changes for v2:
- collect Laurent r-b
Changes for v1:
- none

 drivers/gpu/drm/bridge/samsung-dsim.c | 44 +++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 42e3536cb2fc..3ffdaedaa261 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -376,6 +376,24 @@ static const unsigned int exynos5433_reg_values[] = {
 	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
 };
 
+static const unsigned int imx8mm_dsim_reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = 0,
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x26),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x08),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
 static const struct samsung_dsim_driver_data exynos3_dsi_driver_data = {
 	.reg_ofs = exynos_reg_ofs,
 	.plltmr_reg = 0x50,
@@ -437,6 +455,22 @@ static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
 	.reg_values = exynos5422_reg_values,
 };
 
+static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 2100,
+	.wait_for_reset = 0,
+	.num_bits_resol = 12,
+	/*
+	 * Unlike Exynos, PLL_P(PMS_P) offset 14 is used in i.MX8M Mini/Nano/Plus
+	 * downstream driver - drivers/gpu/drm/bridge/sec-dsim.c
+	 */
+	.pll_p_offset = 14,
+	.reg_values = imx8mm_dsim_reg_values,
+};
+
 static const struct samsung_dsim_driver_data *
 samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS3250] = &exynos3_dsi_driver_data,
@@ -444,6 +478,7 @@ samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS5410] = &exynos5_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
+	[DSIM_TYPE_IMX8MM] = &imx8mm_dsi_driver_data,
 };
 
 static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
@@ -1875,7 +1910,16 @@ const struct dev_pm_ops samsung_dsim_pm_ops = {
 };
 EXPORT_SYMBOL_GPL(samsung_dsim_pm_ops);
 
+static const struct samsung_dsim_plat_data samsung_dsim_imx8mm_pdata = {
+	.hw_type = DSIM_TYPE_IMX8MM,
+	.host_ops = &generic_dsim_host_ops,
+};
+
 static const struct of_device_id samsung_dsim_of_match[] = {
+	{
+		.compatible = "fsl,imx8mm-mipi-dsim",
+		.data = &samsung_dsim_imx8mm_pdata,
+	},
 	{ /* sentinel. */ }
 };
 MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
-- 
2.25.1

[PATCH v15 15/16] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support

[Jagan Teki]

Samsung MIPI DSIM bridge can also be found in i.MX8M Plus SoC.

Add dt-bingings for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect ACK from Rob
Changes for v10, v9:
- none

 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 5133d4d39190..2a5f0889ec32 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -8,6 +8,7 @@ Required properties:
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
 		"fsl,imx8mm-mipi-dsim" /* for i.MX8M Mini/Nano SoCs */
+		"fsl,imx8mp-mipi-dsim" /* for i.MX8M Plus SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
-- 
2.25.1

[PATCH v15 15/16] dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support

[Jagan Teki]

Samsung MIPI DSIM bridge can also be found in i.MX8M Plus SoC.

Add dt-bingings for it.

Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect ACK from Rob
Changes for v10, v9:
- none

 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 5133d4d39190..2a5f0889ec32 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -8,6 +8,7 @@ Required properties:
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
 		"fsl,imx8mm-mipi-dsim" /* for i.MX8M Mini/Nano SoCs */
+		"fsl,imx8mp-mipi-dsim" /* for i.MX8M Plus SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
-- 
2.25.1

[PATCH v15 16/16] drm: bridge: samsung-dsim: Add i.MX8M Plus support

[Jagan Teki]

From: Marek Vasut <marex@denx.de>

Add extras to support i.MX8M Plus. The main change is the removal of
HS/VS/DE signal inversion in the LCDIFv3-DSIM glue logic, otherwise
the implementation of this IP in i.MX8M Plus is very much compatible
with the i.MX8M Mini/Nano one.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- collect ACK from Robert
Changes for v10:
- none
Changes for v9:
- added im8mp in DSIM_STATE_REINITIALIZED check
- drop previous = NULL check

 drivers/gpu/drm/bridge/samsung-dsim.c | 23 +++++++++++++++++++++++
 include/drm/bridge/samsung-dsim.h     |  1 +
 2 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 3ffdaedaa261..b4a5348b763c 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -479,6 +479,7 @@ samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
 	[DSIM_TYPE_IMX8MM] = &imx8mm_dsi_driver_data,
+	[DSIM_TYPE_IMX8MP] = &imx8mm_dsi_driver_data,
 };
 
 static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
@@ -1452,10 +1453,17 @@ static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
 	 * 13.6.2.7.2 RGB interface
 	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
 	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+	 *
+	 * The i.MX8M Plus glue logic between LCDIFv3 and DSIM does not
+	 * implement the same behavior, therefore LCDIFv3 must generate
+	 * HS/VS/DE signals active HIGH.
 	 */
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
 		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
 		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	} else if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MP) {
+		adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+		adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
 	}
 
 	return 0;
@@ -1721,6 +1729,10 @@ static const struct samsung_dsim_host_ops generic_dsim_host_ops = {
 	.unregister_host = generic_dsim_unregister_host,
 };
 
+static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_high = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
 static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_low = {
 	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
 };
@@ -1810,6 +1822,8 @@ int samsung_dsim_probe(struct platform_device *pdev)
 	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
 		dsi->bridge.timings = &samsung_dsim_bridge_timings_de_low;
+	else
+		dsi->bridge.timings = &samsung_dsim_bridge_timings_de_high;
 
 	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
 		ret = dsi->plat_data->host_ops->register_host(dsi);
@@ -1915,11 +1929,20 @@ static const struct samsung_dsim_plat_data samsung_dsim_imx8mm_pdata = {
 	.host_ops = &generic_dsim_host_ops,
 };
 
+static const struct samsung_dsim_plat_data samsung_dsim_imx8mp_pdata = {
+	.hw_type = DSIM_TYPE_IMX8MP,
+	.host_ops = &generic_dsim_host_ops,
+};
+
 static const struct of_device_id samsung_dsim_of_match[] = {
 	{
 		.compatible = "fsl,imx8mm-mipi-dsim",
 		.data = &samsung_dsim_imx8mm_pdata,
 	},
+	{
+		.compatible = "fsl,imx8mp-mipi-dsim",
+		.data = &samsung_dsim_imx8mp_pdata,
+	},
 	{ /* sentinel. */ }
 };
 MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
index 4ba387c958ae..fb923caf09e1 100644
--- a/include/drm/bridge/samsung-dsim.h
+++ b/include/drm/bridge/samsung-dsim.h
@@ -28,6 +28,7 @@ enum samsung_dsim_type {
 	DSIM_TYPE_EXYNOS5422,
 	DSIM_TYPE_EXYNOS5433,
 	DSIM_TYPE_IMX8MM,
+	DSIM_TYPE_IMX8MP,
 	DSIM_TYPE_COUNT,
 };
 
-- 
2.25.1

[PATCH v15 16/16] drm: bridge: samsung-dsim: Add i.MX8M Plus support

[Jagan Teki]

From: Marek Vasut <marex@denx.de>

Add extras to support i.MX8M Plus. The main change is the removal of
HS/VS/DE signal inversion in the LCDIFv3-DSIM glue logic, otherwise
the implementation of this IP in i.MX8M Plus is very much compatible
with the i.MX8M Mini/Nano one.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v15, v13:
- none
Changes for v12:
- collect RB from Marek
Changes for v11:
- collect RB from Frieder
- collect ACK from Robert
Changes for v10:
- none
Changes for v9:
- added im8mp in DSIM_STATE_REINITIALIZED check
- drop previous = NULL check

 drivers/gpu/drm/bridge/samsung-dsim.c | 23 +++++++++++++++++++++++
 include/drm/bridge/samsung-dsim.h     |  1 +
 2 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 3ffdaedaa261..b4a5348b763c 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -479,6 +479,7 @@ samsung_dsim_types[DSIM_TYPE_COUNT] = {
 	[DSIM_TYPE_EXYNOS5422] = &exynos5422_dsi_driver_data,
 	[DSIM_TYPE_EXYNOS5433] = &exynos5433_dsi_driver_data,
 	[DSIM_TYPE_IMX8MM] = &imx8mm_dsi_driver_data,
+	[DSIM_TYPE_IMX8MP] = &imx8mm_dsi_driver_data,
 };
 
 static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
@@ -1452,10 +1453,17 @@ static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
 	 * 13.6.2.7.2 RGB interface
 	 * both claim "Vsync, Hsync, and VDEN are active high signals.", the
 	 * LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
+	 *
+	 * The i.MX8M Plus glue logic between LCDIFv3 and DSIM does not
+	 * implement the same behavior, therefore LCDIFv3 must generate
+	 * HS/VS/DE signals active HIGH.
 	 */
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM) {
 		adjusted_mode->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
 		adjusted_mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	} else if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MP) {
+		adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+		adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
 	}
 
 	return 0;
@@ -1721,6 +1729,10 @@ static const struct samsung_dsim_host_ops generic_dsim_host_ops = {
 	.unregister_host = generic_dsim_unregister_host,
 };
 
+static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_high = {
+	.input_bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
 static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_low = {
 	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
 };
@@ -1810,6 +1822,8 @@ int samsung_dsim_probe(struct platform_device *pdev)
 	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
 	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
 		dsi->bridge.timings = &samsung_dsim_bridge_timings_de_low;
+	else
+		dsi->bridge.timings = &samsung_dsim_bridge_timings_de_high;
 
 	if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
 		ret = dsi->plat_data->host_ops->register_host(dsi);
@@ -1915,11 +1929,20 @@ static const struct samsung_dsim_plat_data samsung_dsim_imx8mm_pdata = {
 	.host_ops = &generic_dsim_host_ops,
 };
 
+static const struct samsung_dsim_plat_data samsung_dsim_imx8mp_pdata = {
+	.hw_type = DSIM_TYPE_IMX8MP,
+	.host_ops = &generic_dsim_host_ops,
+};
+
 static const struct of_device_id samsung_dsim_of_match[] = {
 	{
 		.compatible = "fsl,imx8mm-mipi-dsim",
 		.data = &samsung_dsim_imx8mm_pdata,
 	},
+	{
+		.compatible = "fsl,imx8mp-mipi-dsim",
+		.data = &samsung_dsim_imx8mp_pdata,
+	},
 	{ /* sentinel. */ }
 };
 MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
index 4ba387c958ae..fb923caf09e1 100644
--- a/include/drm/bridge/samsung-dsim.h
+++ b/include/drm/bridge/samsung-dsim.h
@@ -28,6 +28,7 @@ enum samsung_dsim_type {
 	DSIM_TYPE_EXYNOS5422,
 	DSIM_TYPE_EXYNOS5433,
 	DSIM_TYPE_IMX8MM,
+	DSIM_TYPE_IMX8MP,
 	DSIM_TYPE_COUNT,
 };
 
-- 
2.25.1

Re: [PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2112 bytes --]

On Fri, Mar 03, 2023 at 08:21:30PM +0530, Jagan Teki wrote:
> LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
> the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
> active low (DE_LOW). This makes the valid data transfer on each
> horizontal line.
> 
> So, add additional bus flags DE_LOW setting via input_bus_flags
> for i.MX8M Mini/Nano platforms.
> 
> Reviewed-by: Marek Vasut <marex@denx.de>
> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> Suggested-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v15, v13:
> - none
> Changes for v12:
> - collect RB from Marek
> Changes for v11:
> - collect RB from Frieder
> Changes for v10, v9:
> - none
> Changes for v8:
> - add DE_LOW for i.MX8M Mini/Nano platforms.
> Changes for v7, v6:
> - none
> Changes for v5:
> - rebased based on updated bridge changes
> Changes for v4 - v1:
> - none
> 
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 796480e4a18b..5d971b607e1a 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
>  	.unbind	= exynos_dsi_unbind,
>  };
>  
> +static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
> +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> +};
> +
>  static int exynos_dsi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>  	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>  	dsi->bridge.pre_enable_prev_first = true;
>  
> +	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
> +	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)

That commit isn't bisectable, you add that enum variant in the last
patch so this won't compile.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2112 bytes --]

On Fri, Mar 03, 2023 at 08:21:30PM +0530, Jagan Teki wrote:
> LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
> the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
> active low (DE_LOW). This makes the valid data transfer on each
> horizontal line.
> 
> So, add additional bus flags DE_LOW setting via input_bus_flags
> for i.MX8M Mini/Nano platforms.
> 
> Reviewed-by: Marek Vasut <marex@denx.de>
> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> Suggested-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v15, v13:
> - none
> Changes for v12:
> - collect RB from Marek
> Changes for v11:
> - collect RB from Frieder
> Changes for v10, v9:
> - none
> Changes for v8:
> - add DE_LOW for i.MX8M Mini/Nano platforms.
> Changes for v7, v6:
> - none
> Changes for v5:
> - rebased based on updated bridge changes
> Changes for v4 - v1:
> - none
> 
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 796480e4a18b..5d971b607e1a 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
>  	.unbind	= exynos_dsi_unbind,
>  };
>  
> +static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
> +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> +};
> +
>  static int exynos_dsi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>  	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>  	dsi->bridge.pre_enable_prev_first = true;
>  
> +	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
> +	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)

That commit isn't bisectable, you add that enum variant in the last
patch so this won't compile.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2351 bytes --]

On Fri, Mar 03, 2023 at 04:00:19PM +0100, Maxime Ripard wrote:
> On Fri, Mar 03, 2023 at 08:21:30PM +0530, Jagan Teki wrote:
> > LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
> > the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
> > active low (DE_LOW). This makes the valid data transfer on each
> > horizontal line.
> > 
> > So, add additional bus flags DE_LOW setting via input_bus_flags
> > for i.MX8M Mini/Nano platforms.
> > 
> > Reviewed-by: Marek Vasut <marex@denx.de>
> > Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> > Suggested-by: Marek Vasut <marex@denx.de>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v15, v13:
> > - none
> > Changes for v12:
> > - collect RB from Marek
> > Changes for v11:
> > - collect RB from Frieder
> > Changes for v10, v9:
> > - none
> > Changes for v8:
> > - add DE_LOW for i.MX8M Mini/Nano platforms.
> > Changes for v7, v6:
> > - none
> > Changes for v5:
> > - rebased based on updated bridge changes
> > Changes for v4 - v1:
> > - none
> > 
> >  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > index 796480e4a18b..5d971b607e1a 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > @@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
> >  	.unbind	= exynos_dsi_unbind,
> >  };
> >  
> > +static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
> > +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> > +};
> > +
> >  static int exynos_dsi_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > @@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
> >  	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
> >  	dsi->bridge.pre_enable_prev_first = true;
> >  
> > +	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
> > +	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
> 
> That commit isn't bisectable, you add that enum variant in the last
> patch so this won't compile.

Scratch that, it's defined in the previous patch, sorry

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 08/16] drm: exynos: dsi: Add input_bus_flags

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2351 bytes --]

On Fri, Mar 03, 2023 at 04:00:19PM +0100, Maxime Ripard wrote:
> On Fri, Mar 03, 2023 at 08:21:30PM +0530, Jagan Teki wrote:
> > LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
> > the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
> > active low (DE_LOW). This makes the valid data transfer on each
> > horizontal line.
> > 
> > So, add additional bus flags DE_LOW setting via input_bus_flags
> > for i.MX8M Mini/Nano platforms.
> > 
> > Reviewed-by: Marek Vasut <marex@denx.de>
> > Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> > Suggested-by: Marek Vasut <marex@denx.de>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v15, v13:
> > - none
> > Changes for v12:
> > - collect RB from Marek
> > Changes for v11:
> > - collect RB from Frieder
> > Changes for v10, v9:
> > - none
> > Changes for v8:
> > - add DE_LOW for i.MX8M Mini/Nano platforms.
> > Changes for v7, v6:
> > - none
> > Changes for v5:
> > - rebased based on updated bridge changes
> > Changes for v4 - v1:
> > - none
> > 
> >  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > index 796480e4a18b..5d971b607e1a 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > @@ -1736,6 +1736,10 @@ static const struct component_ops exynos_dsi_component_ops = {
> >  	.unbind	= exynos_dsi_unbind,
> >  };
> >  
> > +static const struct drm_bridge_timings dsim_bridge_timings_de_low = {
> > +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> > +};
> > +
> >  static int exynos_dsi_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > @@ -1822,6 +1826,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
> >  	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
> >  	dsi->bridge.pre_enable_prev_first = true;
> >  
> > +	/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
> > +	if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
> 
> That commit isn't bisectable, you add that enum variant in the last
> patch so this won't compile.

Scratch that, it's defined in the previous patch, sorry

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 12/16] drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 518 bytes --]

On Fri, Mar 03, 2023 at 08:21:34PM +0530, Jagan Teki wrote:
> +static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
> +				    struct mipi_dsi_device *device)
> +{
> +	struct samsung_dsim *dsi = host_to_dsi(host);
> +	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
> +
> +	if (dsi->out_bridge->funcs->detach)
> +		dsi->out_bridge->funcs->detach(dsi->out_bridge);

You should never call into the bridge ops directly. If there's an issue
in the helpers somewhere else, fix that instead.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 12/16] drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 518 bytes --]

On Fri, Mar 03, 2023 at 08:21:34PM +0530, Jagan Teki wrote:
> +static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
> +				    struct mipi_dsi_device *device)
> +{
> +	struct samsung_dsim *dsi = host_to_dsi(host);
> +	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
> +
> +	if (dsi->out_bridge->funcs->detach)
> +		dsi->out_bridge->funcs->detach(dsi->out_bridge);

You should never call into the bridge ops directly. If there's an issue
in the helpers somewhere else, fix that instead.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v15 12/16] drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge

[Jagan Teki]

On Fri, Mar 3, 2023 at 8:38 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Fri, Mar 03, 2023 at 08:21:34PM +0530, Jagan Teki wrote:
> > +static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
> > +                                 struct mipi_dsi_device *device)
> > +{
> > +     struct samsung_dsim *dsi = host_to_dsi(host);
> > +     const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
> > +
> > +     if (dsi->out_bridge->funcs->detach)
> > +             dsi->out_bridge->funcs->detach(dsi->out_bridge);
>
> You should never call into the bridge ops directly. If there's an issue
> in the helpers somewhere else, fix that instead.

Agreed, it was added by mistake and it was removed in Exynos. I will fix it.

Jagan.

Re: [PATCH v15 12/16] drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge

[Jagan Teki]

On Fri, Mar 3, 2023 at 8:38 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Fri, Mar 03, 2023 at 08:21:34PM +0530, Jagan Teki wrote:
> > +static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
> > +                                 struct mipi_dsi_device *device)
> > +{
> > +     struct samsung_dsim *dsi = host_to_dsi(host);
> > +     const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
> > +
> > +     if (dsi->out_bridge->funcs->detach)
> > +             dsi->out_bridge->funcs->detach(dsi->out_bridge);
>
> You should never call into the bridge ops directly. If there's an issue
> in the helpers somewhere else, fix that instead.

Agreed, it was added by mistake and it was removed in Exynos. I will fix it.

Jagan.

Re: [PATCH v15 01/16] drm: exynos: dsi: Drop explicit call to bridge detach

[Marek Vasut]

On 3/3/23 15:51, Jagan Teki wrote:
> Exynos DSI already converted into a bridge driver, so bridge
> detach will suppose happened during bridge chain removal done
> by the bridge core.
> 
> Drop the explicit call chain to detach the bridge.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v15, v13, v12, v11:
> - none
> Changes for v10:
> - new patch
> 
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 06d6513ddaae..df15501b1075 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1531,8 +1531,6 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
>   	struct exynos_dsi *dsi = host_to_dsi(host);
>   	struct drm_device *drm = dsi->encoder.dev;
>   
> -	if (dsi->out_bridge->funcs->detach)
> -		dsi->out_bridge->funcs->detach(dsi->out_bridge);
>   	dsi->out_bridge = NULL;
>   
>   	if (drm->mode_config.poll_enabled)

Considering also the discussion in v15 12/16

Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v15 01/16] drm: exynos: dsi: Drop explicit call to bridge detach

[Marek Vasut]

On 3/3/23 15:51, Jagan Teki wrote:
> Exynos DSI already converted into a bridge driver, so bridge
> detach will suppose happened during bridge chain removal done
> by the bridge core.
> 
> Drop the explicit call chain to detach the bridge.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v15, v13, v12, v11:
> - none
> Changes for v10:
> - new patch
> 
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 06d6513ddaae..df15501b1075 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1531,8 +1531,6 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
>   	struct exynos_dsi *dsi = host_to_dsi(host);
>   	struct drm_device *drm = dsi->encoder.dev;
>   
> -	if (dsi->out_bridge->funcs->detach)
> -		dsi->out_bridge->funcs->detach(dsi->out_bridge);
>   	dsi->out_bridge = NULL;
>   
>   	if (drm->mode_config.poll_enabled)

Considering also the discussion in v15 12/16

Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v15 02/16] drm: exynos: dsi: Lookup OF-graph or Child node devices

[Marek Vasut]

On 3/3/23 15:51, Jagan Teki wrote:

[...]

> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1470,18 +1470,52 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>   	struct device *dev = dsi->dev;
>   	struct drm_encoder *encoder = &dsi->encoder;
>   	struct drm_device *drm = encoder->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *remote;
>   	struct drm_panel *panel;
>   	int ret;
>   
> -	panel = of_drm_find_panel(device->dev.of_node);
> +	/**

This shouldn't be kerneldoc style comment, drop that extra asterisk (*).

> +	 * Devices can also be child nodes when we also control that device
> +	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).

[...]

With that fixed:

Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v15 02/16] drm: exynos: dsi: Lookup OF-graph or Child node devices

[Marek Vasut]

On 3/3/23 15:51, Jagan Teki wrote:

[...]

> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1470,18 +1470,52 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>   	struct device *dev = dsi->dev;
>   	struct drm_encoder *encoder = &dsi->encoder;
>   	struct drm_device *drm = encoder->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *remote;
>   	struct drm_panel *panel;
>   	int ret;
>   
> -	panel = of_drm_find_panel(device->dev.of_node);
> +	/**

This shouldn't be kerneldoc style comment, drop that extra asterisk (*).

> +	 * Devices can also be child nodes when we also control that device
> +	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).

[...]

With that fixed:

Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hi Jagan,

On 03.03.2023 15:51, Jagan Teki wrote:
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
>
> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>
> Inki Dae: please note that this series added on top of exynos-drm-next
> since few exynos dsi changes are not been part of drm-misc-next.
> Request you to pick these via exynos-drm-next, or let me know if you
> have any comments?

I gave it a try on Exynos TM2e and unfortunately it nukes again:

exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
Unable to handle kernel paging request at virtual address 003d454d414e5675
...
[003d454d414e5675] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
Hardware name: Samsung TM2E board (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_connector_list_iter_next+0x58/0x100
lr : drm_connector_list_iter_next+0x2c/0x100
sp : ffff80000bbab910
...
Call trace:
  drm_connector_list_iter_next+0x58/0x100
  drm_mode_config_reset+0xfc/0x144
  exynos_drm_bind+0x160/0x1b8
  try_to_bring_up_aggregate_device+0x168/0x1d4
  __component_add+0xa8/0x170
  component_add+0x14/0x20
  hdmi_probe+0x3fc/0x6d4
  platform_probe+0x68/0xd8
  really_probe+0x148/0x2b4
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0xd8/0x160
  __device_attach_driver+0xb8/0x138
  bus_for_each_drv+0x84/0xe0
  __device_attach+0xa8/0x1b0
  device_initial_probe+0x14/0x20
  bus_probe_device+0xb0/0xb4
  deferred_probe_work_func+0x8c/0xc8
  process_one_work+0x288/0x6c8
  worker_thread+0x24c/0x450
  kthread+0x118/0x11c
  ret_from_fork+0x10/0x20
Code: 54000580 d1008061 f90006c1 9100c064 (b9403061)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x460002,0e3c0400,0000421b
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]---


The debugging saga strikes again. I will try to analyze this on Monday...


> Patch 0001 - 0002: find child DSI bridge and panel
>
> Patch 0003 - 0004: optional PHY, PMS_P offset
>
> Patch 0005       : introduce hw_type
>
> Patch 0006	 : fixing host init
>
> Patch 0007	 : atomic_check
>
> Patch 0008	 : input_bus_flags
>
> Patch 0009	 : atomic_get_input_bus_fmts
>
> Patch 0010 - 0011: component vs bridge
>
> Patch 0012	 : DSIM bridge
>
> Patch 0013 - 0014: i.MX8M Mini/Nano
>
> Patch 0015 - 0016: i.MX8M Plus
>
> Changes for v15:
> - drop drm_of helpers
> - re-added find DSI bridge/Panel helper in dsim
> - collect RB from Marek V
> - fixed leading underscore in function names
> - commit messages updated
> - rebased on exynos-drm-next
>
> Changes for v13:
> - remove devm call for DSI panel or bridge finding
> - rebased on drm-misc-next
>
> Changes for v12:
> - collect RB from Marek V
> - add te_irq_handler hook
> - fix comments from Marek V
> - update atomic_get_input_bus_fmts logic
>
> Changes for v11:
> - collect RB from Frieder Schrempf
> - collect ACK from Rob
> - collect ACK from Robert
> - fix BIT macro replacements
> - fix checkpatch --strict warnings
> - fix unneeded commit text
> - drop extra lines
>
> Changes for v10:
> - rebase on drm-misc-next
> - add drm_of_dsi_find_panel_or_bridge
> - add devm_drm_of_dsi_get_bridge
> - fix host initialization (Thanks to Marek Szyprowski)
> - rearrange the tiny patches for easy to review
> - update simple names for enum hw_type
> - add is_hw_exynos macro
> - rework on commit messages
>
> Changes for v9:
> - rebase on drm-misc-next
> - drop drm bridge attach fix for Exynos
> - added prepare_prev_first flag
> - added pre_enable_prev_first flag
> - fix bridge chain order for exynos
> - added fix for Exynos host init for first DSI transfer
> - added MEDIA_BUS_FMT_FIXED
> - return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
>    list is unsupported.
> - added MEDIA_BUS_FMT_YUYV10_1X20
> - added MEDIA_BUS_FMT_YUYV12_1X24
>
> Changes for v8:
> * fixed comment lines
> * fixed commit messages
> * fixed video mode bits
> * collect Marek Ack
> * fixed video mode bit names
> * update input formats logic
> * added imx8mplus support
>
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
>
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
>
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
>
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
>
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
>
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
>
> Tested in Engicam i.Core MX8M Mini SoM.
>
> Repo:
> https://protect2.fireeye.com/v1/url?k=43fc0c46-2281e43e-43fd8709-74fe485fffb1-f84e6959aef8bb31&q=1&e=008cbb56-9344-43e4-903f-5547c72a3ade&u=https%3A%2F%2Fgithub.com%2Fopenedev%2Fkernel%2Ftree%2Fimx8mm-dsi-v15
>
> v13:
> https://lore.kernel.org/all/20230227113925.875425-1-jagan@amarulasolutions.com/
>
> Any inputs?
> Jagan.
>
> Jagan Teki (14):
>    drm: exynos: dsi: Drop explicit call to bridge detach
>    drm: exynos: dsi: Lookup OF-graph or Child node devices
>    drm: exynos: dsi: Mark PHY as optional
>    drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
>    drm: exynos: dsi: Introduce hw_type platform data
>    drm: exynos: dsi: Add atomic check
>    drm: exynos: dsi: Add input_bus_flags
>    drm: exynos: dsi: Add atomic_get_input_bus_fmts
>    drm: exynos: dsi: Consolidate component and bridge
>    drm: exynos: dsi: Add host helper for te_irq_handler
>    drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
>    dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
>    drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
>    dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support
>
> Marek Szyprowski (1):
>    drm: exynos: dsi: Handle proper host initialization
>
> Marek Vasut (1):
>    drm: bridge: samsung-dsim: Add i.MX8M Plus support
>
>   .../bindings/display/exynos/exynos_dsim.txt   |    2 +
>   MAINTAINERS                                   |    9 +
>   drivers/gpu/drm/bridge/Kconfig                |   12 +
>   drivers/gpu/drm/bridge/Makefile               |    1 +
>   drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
>   drivers/gpu/drm/exynos/Kconfig                |    1 +
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
>   include/drm/bridge/samsung-dsim.h             |  115 +
>   8 files changed, 2190 insertions(+), 1732 deletions(-)
>   create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>   create mode 100644 include/drm/bridge/samsung-dsim.h
>
Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hi Jagan,

On 03.03.2023 15:51, Jagan Teki wrote:
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
>
> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>
> Inki Dae: please note that this series added on top of exynos-drm-next
> since few exynos dsi changes are not been part of drm-misc-next.
> Request you to pick these via exynos-drm-next, or let me know if you
> have any comments?

I gave it a try on Exynos TM2e and unfortunately it nukes again:

exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
Unable to handle kernel paging request at virtual address 003d454d414e5675
...
[003d454d414e5675] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
Hardware name: Samsung TM2E board (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_connector_list_iter_next+0x58/0x100
lr : drm_connector_list_iter_next+0x2c/0x100
sp : ffff80000bbab910
...
Call trace:
  drm_connector_list_iter_next+0x58/0x100
  drm_mode_config_reset+0xfc/0x144
  exynos_drm_bind+0x160/0x1b8
  try_to_bring_up_aggregate_device+0x168/0x1d4
  __component_add+0xa8/0x170
  component_add+0x14/0x20
  hdmi_probe+0x3fc/0x6d4
  platform_probe+0x68/0xd8
  really_probe+0x148/0x2b4
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0xd8/0x160
  __device_attach_driver+0xb8/0x138
  bus_for_each_drv+0x84/0xe0
  __device_attach+0xa8/0x1b0
  device_initial_probe+0x14/0x20
  bus_probe_device+0xb0/0xb4
  deferred_probe_work_func+0x8c/0xc8
  process_one_work+0x288/0x6c8
  worker_thread+0x24c/0x450
  kthread+0x118/0x11c
  ret_from_fork+0x10/0x20
Code: 54000580 d1008061 f90006c1 9100c064 (b9403061)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x460002,0e3c0400,0000421b
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]---


The debugging saga strikes again. I will try to analyze this on Monday...


> Patch 0001 - 0002: find child DSI bridge and panel
>
> Patch 0003 - 0004: optional PHY, PMS_P offset
>
> Patch 0005       : introduce hw_type
>
> Patch 0006	 : fixing host init
>
> Patch 0007	 : atomic_check
>
> Patch 0008	 : input_bus_flags
>
> Patch 0009	 : atomic_get_input_bus_fmts
>
> Patch 0010 - 0011: component vs bridge
>
> Patch 0012	 : DSIM bridge
>
> Patch 0013 - 0014: i.MX8M Mini/Nano
>
> Patch 0015 - 0016: i.MX8M Plus
>
> Changes for v15:
> - drop drm_of helpers
> - re-added find DSI bridge/Panel helper in dsim
> - collect RB from Marek V
> - fixed leading underscore in function names
> - commit messages updated
> - rebased on exynos-drm-next
>
> Changes for v13:
> - remove devm call for DSI panel or bridge finding
> - rebased on drm-misc-next
>
> Changes for v12:
> - collect RB from Marek V
> - add te_irq_handler hook
> - fix comments from Marek V
> - update atomic_get_input_bus_fmts logic
>
> Changes for v11:
> - collect RB from Frieder Schrempf
> - collect ACK from Rob
> - collect ACK from Robert
> - fix BIT macro replacements
> - fix checkpatch --strict warnings
> - fix unneeded commit text
> - drop extra lines
>
> Changes for v10:
> - rebase on drm-misc-next
> - add drm_of_dsi_find_panel_or_bridge
> - add devm_drm_of_dsi_get_bridge
> - fix host initialization (Thanks to Marek Szyprowski)
> - rearrange the tiny patches for easy to review
> - update simple names for enum hw_type
> - add is_hw_exynos macro
> - rework on commit messages
>
> Changes for v9:
> - rebase on drm-misc-next
> - drop drm bridge attach fix for Exynos
> - added prepare_prev_first flag
> - added pre_enable_prev_first flag
> - fix bridge chain order for exynos
> - added fix for Exynos host init for first DSI transfer
> - added MEDIA_BUS_FMT_FIXED
> - return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
>    list is unsupported.
> - added MEDIA_BUS_FMT_YUYV10_1X20
> - added MEDIA_BUS_FMT_YUYV12_1X24
>
> Changes for v8:
> * fixed comment lines
> * fixed commit messages
> * fixed video mode bits
> * collect Marek Ack
> * fixed video mode bit names
> * update input formats logic
> * added imx8mplus support
>
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
>
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
>
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
>
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
>
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
>
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
>
> Tested in Engicam i.Core MX8M Mini SoM.
>
> Repo:
> https://protect2.fireeye.com/v1/url?k=43fc0c46-2281e43e-43fd8709-74fe485fffb1-f84e6959aef8bb31&q=1&e=008cbb56-9344-43e4-903f-5547c72a3ade&u=https%3A%2F%2Fgithub.com%2Fopenedev%2Fkernel%2Ftree%2Fimx8mm-dsi-v15
>
> v13:
> https://lore.kernel.org/all/20230227113925.875425-1-jagan@amarulasolutions.com/
>
> Any inputs?
> Jagan.
>
> Jagan Teki (14):
>    drm: exynos: dsi: Drop explicit call to bridge detach
>    drm: exynos: dsi: Lookup OF-graph or Child node devices
>    drm: exynos: dsi: Mark PHY as optional
>    drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
>    drm: exynos: dsi: Introduce hw_type platform data
>    drm: exynos: dsi: Add atomic check
>    drm: exynos: dsi: Add input_bus_flags
>    drm: exynos: dsi: Add atomic_get_input_bus_fmts
>    drm: exynos: dsi: Consolidate component and bridge
>    drm: exynos: dsi: Add host helper for te_irq_handler
>    drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
>    dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
>    drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
>    dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support
>
> Marek Szyprowski (1):
>    drm: exynos: dsi: Handle proper host initialization
>
> Marek Vasut (1):
>    drm: bridge: samsung-dsim: Add i.MX8M Plus support
>
>   .../bindings/display/exynos/exynos_dsim.txt   |    2 +
>   MAINTAINERS                                   |    9 +
>   drivers/gpu/drm/bridge/Kconfig                |   12 +
>   drivers/gpu/drm/bridge/Makefile               |    1 +
>   drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
>   drivers/gpu/drm/exynos/Kconfig                |    1 +
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
>   include/drm/bridge/samsung-dsim.h             |  115 +
>   8 files changed, 2190 insertions(+), 1732 deletions(-)
>   create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>   create mode 100644 include/drm/bridge/samsung-dsim.h
>
Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 03.03.2023 15:51, Jagan Teki wrote:
> > This series supports common bridge support for Samsung MIPI DSIM
> > which is used in Exynos and i.MX8MM SoC's.
> >
> > The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >
> > Inki Dae: please note that this series added on top of exynos-drm-next
> > since few exynos dsi changes are not been part of drm-misc-next.
> > Request you to pick these via exynos-drm-next, or let me know if you
> > have any comments?
>
> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>
> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> Unable to handle kernel paging request at virtual address 003d454d414e5675
> ...
> [003d454d414e5675] address between user and kernel address ranges
> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> Modules linked in:
> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> Hardware name: Samsung TM2E board (DT)
> Workqueue: events_unbound deferred_probe_work_func
> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_connector_list_iter_next+0x58/0x100
> lr : drm_connector_list_iter_next+0x2c/0x100
> sp : ffff80000bbab910
> ...
> Call trace:
>   drm_connector_list_iter_next+0x58/0x100
>   drm_mode_config_reset+0xfc/0x144
>   exynos_drm_bind+0x160/0x1b8
>   try_to_bring_up_aggregate_device+0x168/0x1d4
>   __component_add+0xa8/0x170
>   component_add+0x14/0x20
>   hdmi_probe+0x3fc/0x6d4
>   platform_probe+0x68/0xd8
>   really_probe+0x148/0x2b4
>   __driver_probe_device+0x78/0xe0
>   driver_probe_device+0xd8/0x160
>   __device_attach_driver+0xb8/0x138
>   bus_for_each_drv+0x84/0xe0
>   __device_attach+0xa8/0x1b0
>   device_initial_probe+0x14/0x20
>   bus_probe_device+0xb0/0xb4
>   deferred_probe_work_func+0x8c/0xc8
>   process_one_work+0x288/0x6c8
>   worker_thread+0x24c/0x450
>   kthread+0x118/0x11c
>   ret_from_fork+0x10/0x20

This looks not related to dsi to me since there is no exynos_drm_dsi
call in the trace. look hdmi related. Moreover, I think the exynos dsi
worked well on v10 and I couldn't find any potential differences in
terms of call flow change.
https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10

Please let me know, thanks!

Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 03.03.2023 15:51, Jagan Teki wrote:
> > This series supports common bridge support for Samsung MIPI DSIM
> > which is used in Exynos and i.MX8MM SoC's.
> >
> > The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >
> > Inki Dae: please note that this series added on top of exynos-drm-next
> > since few exynos dsi changes are not been part of drm-misc-next.
> > Request you to pick these via exynos-drm-next, or let me know if you
> > have any comments?
>
> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>
> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> Unable to handle kernel paging request at virtual address 003d454d414e5675
> ...
> [003d454d414e5675] address between user and kernel address ranges
> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> Modules linked in:
> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> Hardware name: Samsung TM2E board (DT)
> Workqueue: events_unbound deferred_probe_work_func
> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_connector_list_iter_next+0x58/0x100
> lr : drm_connector_list_iter_next+0x2c/0x100
> sp : ffff80000bbab910
> ...
> Call trace:
>   drm_connector_list_iter_next+0x58/0x100
>   drm_mode_config_reset+0xfc/0x144
>   exynos_drm_bind+0x160/0x1b8
>   try_to_bring_up_aggregate_device+0x168/0x1d4
>   __component_add+0xa8/0x170
>   component_add+0x14/0x20
>   hdmi_probe+0x3fc/0x6d4
>   platform_probe+0x68/0xd8
>   really_probe+0x148/0x2b4
>   __driver_probe_device+0x78/0xe0
>   driver_probe_device+0xd8/0x160
>   __device_attach_driver+0xb8/0x138
>   bus_for_each_drv+0x84/0xe0
>   __device_attach+0xa8/0x1b0
>   device_initial_probe+0x14/0x20
>   bus_probe_device+0xb0/0xb4
>   deferred_probe_work_func+0x8c/0xc8
>   process_one_work+0x288/0x6c8
>   worker_thread+0x24c/0x450
>   kthread+0x118/0x11c
>   ret_from_fork+0x10/0x20

This looks not related to dsi to me since there is no exynos_drm_dsi
call in the trace. look hdmi related. Moreover, I think the exynos dsi
worked well on v10 and I couldn't find any potential differences in
terms of call flow change.
https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10

Please let me know, thanks!

Jagan.

RE: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[대인기/Tizen Platform Lab(SR)/삼성전자]

Hi Jagan,

> -----Original Message-----
> From: Jagan Teki <jagan@amarulasolutions.com>
> Sent: Friday, March 3, 2023 11:51 PM
> To: Andrzej Hajda <andrzej.hajda@intel.com>; Inki Dae <inki.dae@samsung.com>;
> Marek Szyprowski <m.szyprowski@samsung.com>; Neil Armstrong
> <neil.armstrong@linaro.org>; Marek Vasut <marex@denx.de>; Maxime Ripard
> <mripard@kernel.org>
> Cc: Seung-Woo Kim <sw0312.kim@samsung.com>; Kyungmin Park
> <kyungmin.park@samsung.com>; Frieder Schrempf <frieder.schrempf@kontron.de>;
> Tim Harvey <tharvey@gateworks.com>; Adam Ford <aford173@gmail.com>; Matteo
> Lisi <matteo.lisi@engicam.com>; dri-devel@lists.freedesktop.org; linux-
> samsung-soc@vger.kernel.org; linux-amarula <linux-
> amarula@amarulasolutions.com>; Jagan Teki <jagan@amarulasolutions.com>
> Subject: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge
> 
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
> 
> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> 
> Inki Dae: please note that this series added on top of exynos-drm-next
> since few exynos dsi changes are not been part of drm-misc-next.
> Request you to pick these via exynos-drm-next, or let me know if you
> have any comments?

Seems some issue Marek found on testing. If fixed then I will try to pick this
patch series up.

To Andrzej, Neil, Robert and Laurent.
Could you give me any comment to below patch,
[drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge]  :
https://www.spinics.net/lists/dri-devel/msg385731.html

If you could kindly provide me with an Acked-by or Signed-off-by after review,
it would greatly assist me in picking up this patch series for upstream.

Thanks,
Inki Dae

> 
> Patch 0001 - 0002: find child DSI bridge and panel
> 
> Patch 0003 - 0004: optional PHY, PMS_P offset
> 
> Patch 0005       : introduce hw_type
> 
> Patch 0006	 : fixing host init
> 
> Patch 0007	 : atomic_check
> 
> Patch 0008	 : input_bus_flags
> 
> Patch 0009	 : atomic_get_input_bus_fmts
> 
> Patch 0010 - 0011: component vs bridge
> 
> Patch 0012	 : DSIM bridge
> 
> Patch 0013 - 0014: i.MX8M Mini/Nano
> 
> Patch 0015 - 0016: i.MX8M Plus
> 
> Changes for v15:
> - drop drm_of helpers
> - re-added find DSI bridge/Panel helper in dsim
> - collect RB from Marek V
> - fixed leading underscore in function names
> - commit messages updated
> - rebased on exynos-drm-next
> 
> Changes for v13:
> - remove devm call for DSI panel or bridge finding
> - rebased on drm-misc-next
> 
> Changes for v12:
> - collect RB from Marek V
> - add te_irq_handler hook
> - fix comments from Marek V
> - update atomic_get_input_bus_fmts logic
> 
> Changes for v11:
> - collect RB from Frieder Schrempf
> - collect ACK from Rob
> - collect ACK from Robert
> - fix BIT macro replacements
> - fix checkpatch --strict warnings
> - fix unneeded commit text
> - drop extra lines
> 
> Changes for v10:
> - rebase on drm-misc-next
> - add drm_of_dsi_find_panel_or_bridge
> - add devm_drm_of_dsi_get_bridge
> - fix host initialization (Thanks to Marek Szyprowski)
> - rearrange the tiny patches for easy to review
> - update simple names for enum hw_type
> - add is_hw_exynos macro
> - rework on commit messages
> 
> Changes for v9:
> - rebase on drm-misc-next
> - drop drm bridge attach fix for Exynos
> - added prepare_prev_first flag
> - added pre_enable_prev_first flag
> - fix bridge chain order for exynos
> - added fix for Exynos host init for first DSI transfer
> - added MEDIA_BUS_FMT_FIXED
> - return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
>   list is unsupported.
> - added MEDIA_BUS_FMT_YUYV10_1X20
> - added MEDIA_BUS_FMT_YUYV12_1X24
> 
> Changes for v8:
> * fixed comment lines
> * fixed commit messages
> * fixed video mode bits
> * collect Marek Ack
> * fixed video mode bit names
> * update input formats logic
> * added imx8mplus support
> 
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
> 
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
> 
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
> 
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
> 
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
> 
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
> 
> Tested in Engicam i.Core MX8M Mini SoM.
> 
> Repo:
> https://protect2.fireeye.com/v1/url?k=ba7a5cbf-dbf1498c-ba7bd7f0-000babff9bb7-
> 64eb01b9825d1cad&q=1&e=55e2423e-1b57-4c22-a4a8-
> 3dfcebdd3d9d&u=https%3A%2F%2Fgithub.com%2Fopenedev%2Fkernel%2Ftree%2Fimx8mm-
> dsi-v15
> 
> v13:
> https://lore.kernel.org/all/20230227113925.875425-1-
> jagan@amarulasolutions.com/
> 
> Any inputs?
> Jagan.
> 
> Jagan Teki (14):
>   drm: exynos: dsi: Drop explicit call to bridge detach
>   drm: exynos: dsi: Lookup OF-graph or Child node devices
>   drm: exynos: dsi: Mark PHY as optional
>   drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
>   drm: exynos: dsi: Introduce hw_type platform data
>   drm: exynos: dsi: Add atomic check
>   drm: exynos: dsi: Add input_bus_flags
>   drm: exynos: dsi: Add atomic_get_input_bus_fmts
>   drm: exynos: dsi: Consolidate component and bridge
>   drm: exynos: dsi: Add host helper for te_irq_handler
>   drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
>   drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support
> 
> Marek Szyprowski (1):
>   drm: exynos: dsi: Handle proper host initialization
> 
> Marek Vasut (1):
>   drm: bridge: samsung-dsim: Add i.MX8M Plus support
> 
>  .../bindings/display/exynos/exynos_dsim.txt   |    2 +
>  MAINTAINERS                                   |    9 +
>  drivers/gpu/drm/bridge/Kconfig                |   12 +
>  drivers/gpu/drm/bridge/Makefile               |    1 +
>  drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
>  drivers/gpu/drm/exynos/Kconfig                |    1 +
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
>  include/drm/bridge/samsung-dsim.h             |  115 +
>  8 files changed, 2190 insertions(+), 1732 deletions(-)
>  create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>  create mode 100644 include/drm/bridge/samsung-dsim.h
> 
> --
> 2.25.1

RE: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[대인기/Tizen Platform Lab(SR)/삼성전자]

Hi Jagan,

> -----Original Message-----
> From: Jagan Teki <jagan@amarulasolutions.com>
> Sent: Friday, March 3, 2023 11:51 PM
> To: Andrzej Hajda <andrzej.hajda@intel.com>; Inki Dae <inki.dae@samsung.com>;
> Marek Szyprowski <m.szyprowski@samsung.com>; Neil Armstrong
> <neil.armstrong@linaro.org>; Marek Vasut <marex@denx.de>; Maxime Ripard
> <mripard@kernel.org>
> Cc: Seung-Woo Kim <sw0312.kim@samsung.com>; Kyungmin Park
> <kyungmin.park@samsung.com>; Frieder Schrempf <frieder.schrempf@kontron.de>;
> Tim Harvey <tharvey@gateworks.com>; Adam Ford <aford173@gmail.com>; Matteo
> Lisi <matteo.lisi@engicam.com>; dri-devel@lists.freedesktop.org; linux-
> samsung-soc@vger.kernel.org; linux-amarula <linux-
> amarula@amarulasolutions.com>; Jagan Teki <jagan@amarulasolutions.com>
> Subject: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge
> 
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
> 
> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> 
> Inki Dae: please note that this series added on top of exynos-drm-next
> since few exynos dsi changes are not been part of drm-misc-next.
> Request you to pick these via exynos-drm-next, or let me know if you
> have any comments?

Seems some issue Marek found on testing. If fixed then I will try to pick this
patch series up.

To Andrzej, Neil, Robert and Laurent.
Could you give me any comment to below patch,
[drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge]  :
https://www.spinics.net/lists/dri-devel/msg385731.html

If you could kindly provide me with an Acked-by or Signed-off-by after review,
it would greatly assist me in picking up this patch series for upstream.

Thanks,
Inki Dae

> 
> Patch 0001 - 0002: find child DSI bridge and panel
> 
> Patch 0003 - 0004: optional PHY, PMS_P offset
> 
> Patch 0005       : introduce hw_type
> 
> Patch 0006	 : fixing host init
> 
> Patch 0007	 : atomic_check
> 
> Patch 0008	 : input_bus_flags
> 
> Patch 0009	 : atomic_get_input_bus_fmts
> 
> Patch 0010 - 0011: component vs bridge
> 
> Patch 0012	 : DSIM bridge
> 
> Patch 0013 - 0014: i.MX8M Mini/Nano
> 
> Patch 0015 - 0016: i.MX8M Plus
> 
> Changes for v15:
> - drop drm_of helpers
> - re-added find DSI bridge/Panel helper in dsim
> - collect RB from Marek V
> - fixed leading underscore in function names
> - commit messages updated
> - rebased on exynos-drm-next
> 
> Changes for v13:
> - remove devm call for DSI panel or bridge finding
> - rebased on drm-misc-next
> 
> Changes for v12:
> - collect RB from Marek V
> - add te_irq_handler hook
> - fix comments from Marek V
> - update atomic_get_input_bus_fmts logic
> 
> Changes for v11:
> - collect RB from Frieder Schrempf
> - collect ACK from Rob
> - collect ACK from Robert
> - fix BIT macro replacements
> - fix checkpatch --strict warnings
> - fix unneeded commit text
> - drop extra lines
> 
> Changes for v10:
> - rebase on drm-misc-next
> - add drm_of_dsi_find_panel_or_bridge
> - add devm_drm_of_dsi_get_bridge
> - fix host initialization (Thanks to Marek Szyprowski)
> - rearrange the tiny patches for easy to review
> - update simple names for enum hw_type
> - add is_hw_exynos macro
> - rework on commit messages
> 
> Changes for v9:
> - rebase on drm-misc-next
> - drop drm bridge attach fix for Exynos
> - added prepare_prev_first flag
> - added pre_enable_prev_first flag
> - fix bridge chain order for exynos
> - added fix for Exynos host init for first DSI transfer
> - added MEDIA_BUS_FMT_FIXED
> - return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
>   list is unsupported.
> - added MEDIA_BUS_FMT_YUYV10_1X20
> - added MEDIA_BUS_FMT_YUYV12_1X24
> 
> Changes for v8:
> * fixed comment lines
> * fixed commit messages
> * fixed video mode bits
> * collect Marek Ack
> * fixed video mode bit names
> * update input formats logic
> * added imx8mplus support
> 
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
> 
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
> 
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
> 
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
> 
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
> 
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
> 
> Tested in Engicam i.Core MX8M Mini SoM.
> 
> Repo:
> https://protect2.fireeye.com/v1/url?k=ba7a5cbf-dbf1498c-ba7bd7f0-000babff9bb7-
> 64eb01b9825d1cad&q=1&e=55e2423e-1b57-4c22-a4a8-
> 3dfcebdd3d9d&u=https%3A%2F%2Fgithub.com%2Fopenedev%2Fkernel%2Ftree%2Fimx8mm-
> dsi-v15
> 
> v13:
> https://lore.kernel.org/all/20230227113925.875425-1-
> jagan@amarulasolutions.com/
> 
> Any inputs?
> Jagan.
> 
> Jagan Teki (14):
>   drm: exynos: dsi: Drop explicit call to bridge detach
>   drm: exynos: dsi: Lookup OF-graph or Child node devices
>   drm: exynos: dsi: Mark PHY as optional
>   drm: exynos: dsi: Add platform PLL_P (PMS_P) offset
>   drm: exynos: dsi: Introduce hw_type platform data
>   drm: exynos: dsi: Add atomic check
>   drm: exynos: dsi: Add input_bus_flags
>   drm: exynos: dsi: Add atomic_get_input_bus_fmts
>   drm: exynos: dsi: Consolidate component and bridge
>   drm: exynos: dsi: Add host helper for te_irq_handler
>   drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
>   drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support
> 
> Marek Szyprowski (1):
>   drm: exynos: dsi: Handle proper host initialization
> 
> Marek Vasut (1):
>   drm: bridge: samsung-dsim: Add i.MX8M Plus support
> 
>  .../bindings/display/exynos/exynos_dsim.txt   |    2 +
>  MAINTAINERS                                   |    9 +
>  drivers/gpu/drm/bridge/Kconfig                |   12 +
>  drivers/gpu/drm/bridge/Makefile               |    1 +
>  drivers/gpu/drm/bridge/samsung-dsim.c         | 1965 +++++++++++++++++
>  drivers/gpu/drm/exynos/Kconfig                |    1 +
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c       | 1817 +--------------
>  include/drm/bridge/samsung-dsim.h             |  115 +
>  8 files changed, 2190 insertions(+), 1732 deletions(-)
>  create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>  create mode 100644 include/drm/bridge/samsung-dsim.h
> 
> --
> 2.25.1

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Inki Dae,

On Mon, Mar 6, 2023 at 10:54 AM 대인기/Tizen Platform Lab(SR)/삼성전자
<inki.dae@samsung.com> wrote:
>
> Hi Jagan,
>
> > -----Original Message-----
> > From: Jagan Teki <jagan@amarulasolutions.com>
> > Sent: Friday, March 3, 2023 11:51 PM
> > To: Andrzej Hajda <andrzej.hajda@intel.com>; Inki Dae <inki.dae@samsung.com>;
> > Marek Szyprowski <m.szyprowski@samsung.com>; Neil Armstrong
> > <neil.armstrong@linaro.org>; Marek Vasut <marex@denx.de>; Maxime Ripard
> > <mripard@kernel.org>
> > Cc: Seung-Woo Kim <sw0312.kim@samsung.com>; Kyungmin Park
> > <kyungmin.park@samsung.com>; Frieder Schrempf <frieder.schrempf@kontron.de>;
> > Tim Harvey <tharvey@gateworks.com>; Adam Ford <aford173@gmail.com>; Matteo
> > Lisi <matteo.lisi@engicam.com>; dri-devel@lists.freedesktop.org; linux-
> > samsung-soc@vger.kernel.org; linux-amarula <linux-
> > amarula@amarulasolutions.com>; Jagan Teki <jagan@amarulasolutions.com>
> > Subject: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge
> >
> > This series supports common bridge support for Samsung MIPI DSIM
> > which is used in Exynos and i.MX8MM SoC's.
> >
> > The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >
> > Inki Dae: please note that this series added on top of exynos-drm-next
> > since few exynos dsi changes are not been part of drm-misc-next.
> > Request you to pick these via exynos-drm-next, or let me know if you
> > have any comments?
>
> Seems some issue Marek found on testing. If fixed then I will try to pick this
> patch series up.

Okay, I have a few comments from Maxime and Marek V pointed out. I
will send v16 now if you are okay with it?

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Inki Dae,

On Mon, Mar 6, 2023 at 10:54 AM 대인기/Tizen Platform Lab(SR)/삼성전자
<inki.dae@samsung.com> wrote:
>
> Hi Jagan,
>
> > -----Original Message-----
> > From: Jagan Teki <jagan@amarulasolutions.com>
> > Sent: Friday, March 3, 2023 11:51 PM
> > To: Andrzej Hajda <andrzej.hajda@intel.com>; Inki Dae <inki.dae@samsung.com>;
> > Marek Szyprowski <m.szyprowski@samsung.com>; Neil Armstrong
> > <neil.armstrong@linaro.org>; Marek Vasut <marex@denx.de>; Maxime Ripard
> > <mripard@kernel.org>
> > Cc: Seung-Woo Kim <sw0312.kim@samsung.com>; Kyungmin Park
> > <kyungmin.park@samsung.com>; Frieder Schrempf <frieder.schrempf@kontron.de>;
> > Tim Harvey <tharvey@gateworks.com>; Adam Ford <aford173@gmail.com>; Matteo
> > Lisi <matteo.lisi@engicam.com>; dri-devel@lists.freedesktop.org; linux-
> > samsung-soc@vger.kernel.org; linux-amarula <linux-
> > amarula@amarulasolutions.com>; Jagan Teki <jagan@amarulasolutions.com>
> > Subject: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge
> >
> > This series supports common bridge support for Samsung MIPI DSIM
> > which is used in Exynos and i.MX8MM SoC's.
> >
> > The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >
> > Inki Dae: please note that this series added on top of exynos-drm-next
> > since few exynos dsi changes are not been part of drm-misc-next.
> > Request you to pick these via exynos-drm-next, or let me know if you
> > have any comments?
>
> Seems some issue Marek found on testing. If fixed then I will try to pick this
> patch series up.

Okay, I have a few comments from Maxime and Marek V pointed out. I
will send v16 now if you are okay with it?

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hi Jagan,

On 04.03.2023 19:59, Jagan Teki wrote:
> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 03.03.2023 15:51, Jagan Teki wrote:
>>> This series supports common bridge support for Samsung MIPI DSIM
>>> which is used in Exynos and i.MX8MM SoC's.
>>>
>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>
>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>> since few exynos dsi changes are not been part of drm-misc-next.
>>> Request you to pick these via exynos-drm-next, or let me know if you
>>> have any comments?
>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>
>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>> ...
>> [003d454d414e5675] address between user and kernel address ranges
>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>> Modules linked in:
>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>> Hardware name: Samsung TM2E board (DT)
>> Workqueue: events_unbound deferred_probe_work_func
>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>> pc : drm_connector_list_iter_next+0x58/0x100
>> lr : drm_connector_list_iter_next+0x2c/0x100
>> sp : ffff80000bbab910
>> ...
>> Call trace:
>>    drm_connector_list_iter_next+0x58/0x100
>>    drm_mode_config_reset+0xfc/0x144
>>    exynos_drm_bind+0x160/0x1b8
>>    try_to_bring_up_aggregate_device+0x168/0x1d4
>>    __component_add+0xa8/0x170
>>    component_add+0x14/0x20
>>    hdmi_probe+0x3fc/0x6d4
>>    platform_probe+0x68/0xd8
>>    really_probe+0x148/0x2b4
>>    __driver_probe_device+0x78/0xe0
>>    driver_probe_device+0xd8/0x160
>>    __device_attach_driver+0xb8/0x138
>>    bus_for_each_drv+0x84/0xe0
>>    __device_attach+0xa8/0x1b0
>>    device_initial_probe+0x14/0x20
>>    bus_probe_device+0xb0/0xb4
>>    deferred_probe_work_func+0x8c/0xc8
>>    process_one_work+0x288/0x6c8
>>    worker_thread+0x24c/0x450
>>    kthread+0x118/0x11c
>>    ret_from_fork+0x10/0x20
> This looks not related to dsi to me since there is no exynos_drm_dsi
> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> worked well on v10 and I couldn't find any potential differences in
> terms of call flow change.
> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10

Well, the issue is definitely related to this patchset. On Friday, due 
to other kernel messages, I missed the most important part of the log:

[drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2 
device
exynos-dsi 13900000.dsi: request interrupt failed with -22
panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)

It looks that the are at least 2 issues. The first one related to TE 
interrupt registration, the second is broken error path, which should 
free allocated resources and stop DRM from binding/initialization.

This patch fixes the issue (TE gpio/interrupt is optional!):

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c 
b/drivers/gpu/drm/bridge/samsung-dsim.c
index b4a5348b763c..ed83495fe105 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct 
samsung_dsim *dsi, struct device
         int ret;

         dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
-       if (IS_ERR(dsi->te_gpio))
+       if (!dsi->te_gpio)
+               return 0;
+       else if (IS_ERR(dsi->te_gpio))
                 return dev_err_probe(dev, PTR_ERR(dsi->te_gpio), 
"failed to get te GPIO\n");

         te_gpio_irq = gpiod_to_irq(dsi->te_gpio);


The error path in samsung_dsim_host_attach() after 
samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up 
the allocated resources (removing the bridge, detaing the dsi device).

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hi Jagan,

On 04.03.2023 19:59, Jagan Teki wrote:
> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 03.03.2023 15:51, Jagan Teki wrote:
>>> This series supports common bridge support for Samsung MIPI DSIM
>>> which is used in Exynos and i.MX8MM SoC's.
>>>
>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>
>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>> since few exynos dsi changes are not been part of drm-misc-next.
>>> Request you to pick these via exynos-drm-next, or let me know if you
>>> have any comments?
>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>
>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>> ...
>> [003d454d414e5675] address between user and kernel address ranges
>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>> Modules linked in:
>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>> Hardware name: Samsung TM2E board (DT)
>> Workqueue: events_unbound deferred_probe_work_func
>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>> pc : drm_connector_list_iter_next+0x58/0x100
>> lr : drm_connector_list_iter_next+0x2c/0x100
>> sp : ffff80000bbab910
>> ...
>> Call trace:
>>    drm_connector_list_iter_next+0x58/0x100
>>    drm_mode_config_reset+0xfc/0x144
>>    exynos_drm_bind+0x160/0x1b8
>>    try_to_bring_up_aggregate_device+0x168/0x1d4
>>    __component_add+0xa8/0x170
>>    component_add+0x14/0x20
>>    hdmi_probe+0x3fc/0x6d4
>>    platform_probe+0x68/0xd8
>>    really_probe+0x148/0x2b4
>>    __driver_probe_device+0x78/0xe0
>>    driver_probe_device+0xd8/0x160
>>    __device_attach_driver+0xb8/0x138
>>    bus_for_each_drv+0x84/0xe0
>>    __device_attach+0xa8/0x1b0
>>    device_initial_probe+0x14/0x20
>>    bus_probe_device+0xb0/0xb4
>>    deferred_probe_work_func+0x8c/0xc8
>>    process_one_work+0x288/0x6c8
>>    worker_thread+0x24c/0x450
>>    kthread+0x118/0x11c
>>    ret_from_fork+0x10/0x20
> This looks not related to dsi to me since there is no exynos_drm_dsi
> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> worked well on v10 and I couldn't find any potential differences in
> terms of call flow change.
> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10

Well, the issue is definitely related to this patchset. On Friday, due 
to other kernel messages, I missed the most important part of the log:

[drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2 
device
exynos-dsi 13900000.dsi: request interrupt failed with -22
panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)

It looks that the are at least 2 issues. The first one related to TE 
interrupt registration, the second is broken error path, which should 
free allocated resources and stop DRM from binding/initialization.

This patch fixes the issue (TE gpio/interrupt is optional!):

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c 
b/drivers/gpu/drm/bridge/samsung-dsim.c
index b4a5348b763c..ed83495fe105 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct 
samsung_dsim *dsi, struct device
         int ret;

         dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
-       if (IS_ERR(dsi->te_gpio))
+       if (!dsi->te_gpio)
+               return 0;
+       else if (IS_ERR(dsi->te_gpio))
                 return dev_err_probe(dev, PTR_ERR(dsi->te_gpio), 
"failed to get te GPIO\n");

         te_gpio_irq = gpiod_to_irq(dsi->te_gpio);


The error path in samsung_dsim_host_attach() after 
samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up 
the allocated resources (removing the bridge, detaing the dsi device).

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 04.03.2023 19:59, Jagan Teki wrote:
> > On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 03.03.2023 15:51, Jagan Teki wrote:
> >>> This series supports common bridge support for Samsung MIPI DSIM
> >>> which is used in Exynos and i.MX8MM SoC's.
> >>>
> >>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >>>
> >>> Inki Dae: please note that this series added on top of exynos-drm-next
> >>> since few exynos dsi changes are not been part of drm-misc-next.
> >>> Request you to pick these via exynos-drm-next, or let me know if you
> >>> have any comments?
> >> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> >>
> >> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> >> Unable to handle kernel paging request at virtual address 003d454d414e5675
> >> ...
> >> [003d454d414e5675] address between user and kernel address ranges
> >> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> >> Modules linked in:
> >> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> >> Hardware name: Samsung TM2E board (DT)
> >> Workqueue: events_unbound deferred_probe_work_func
> >> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >> pc : drm_connector_list_iter_next+0x58/0x100
> >> lr : drm_connector_list_iter_next+0x2c/0x100
> >> sp : ffff80000bbab910
> >> ...
> >> Call trace:
> >>    drm_connector_list_iter_next+0x58/0x100
> >>    drm_mode_config_reset+0xfc/0x144
> >>    exynos_drm_bind+0x160/0x1b8
> >>    try_to_bring_up_aggregate_device+0x168/0x1d4
> >>    __component_add+0xa8/0x170
> >>    component_add+0x14/0x20
> >>    hdmi_probe+0x3fc/0x6d4
> >>    platform_probe+0x68/0xd8
> >>    really_probe+0x148/0x2b4
> >>    __driver_probe_device+0x78/0xe0
> >>    driver_probe_device+0xd8/0x160
> >>    __device_attach_driver+0xb8/0x138
> >>    bus_for_each_drv+0x84/0xe0
> >>    __device_attach+0xa8/0x1b0
> >>    device_initial_probe+0x14/0x20
> >>    bus_probe_device+0xb0/0xb4
> >>    deferred_probe_work_func+0x8c/0xc8
> >>    process_one_work+0x288/0x6c8
> >>    worker_thread+0x24c/0x450
> >>    kthread+0x118/0x11c
> >>    ret_from_fork+0x10/0x20
> > This looks not related to dsi to me since there is no exynos_drm_dsi
> > call in the trace. look hdmi related. Moreover, I think the exynos dsi
> > worked well on v10 and I couldn't find any potential differences in
> > terms of call flow change.
> > https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>
> Well, the issue is definitely related to this patchset. On Friday, due
> to other kernel messages, I missed the most important part of the log:
>
> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> device
> exynos-dsi 13900000.dsi: request interrupt failed with -22
> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>
> It looks that the are at least 2 issues. The first one related to TE
> interrupt registration, the second is broken error path, which should
> free allocated resources and stop DRM from binding/initialization.
>
> This patch fixes the issue (TE gpio/interrupt is optional!):
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> b/drivers/gpu/drm/bridge/samsung-dsim.c
> index b4a5348b763c..ed83495fe105 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> samsung_dsim *dsi, struct device
>          int ret;
>
>          dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> -       if (IS_ERR(dsi->te_gpio))
> +       if (!dsi->te_gpio)
> +               return 0;
> +       else if (IS_ERR(dsi->te_gpio))

I think I missed this change from v10 where Marek V commented to move
this in dsim instead of in Exynos. anyway, I will correct this.

>                  return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> "failed to get te GPIO\n");
>
>          te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>
>
> The error path in samsung_dsim_host_attach() after
> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> the allocated resources (removing the bridge, detaing the dsi device).

This is because of the same discussion of moving TE GPIO in dsim instead exynos.

How about register TE GPIO before calling host attach like this,

--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
mipi_dsi_host *host,

        drm_bridge_add(&dsi->bridge);

-       if (pdata->host_ops && pdata->host_ops->attach)
-               pdata->host_ops->attach(dsi, device);
-
        /*
         * This is a temporary solution and should be made by more generic way.
         *
@@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
mipi_dsi_host *host,
                        return ret;
        }

+       if (pdata->host_ops && pdata->host_ops->attach)
+               pdata->host_ops->attach(dsi, device);
+
        dsi->lanes = device->lanes;
        dsi->format = device->format;
        dsi->mode_flags = device->mode_flags;

Would you please check this?

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 04.03.2023 19:59, Jagan Teki wrote:
> > On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 03.03.2023 15:51, Jagan Teki wrote:
> >>> This series supports common bridge support for Samsung MIPI DSIM
> >>> which is used in Exynos and i.MX8MM SoC's.
> >>>
> >>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >>>
> >>> Inki Dae: please note that this series added on top of exynos-drm-next
> >>> since few exynos dsi changes are not been part of drm-misc-next.
> >>> Request you to pick these via exynos-drm-next, or let me know if you
> >>> have any comments?
> >> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> >>
> >> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> >> Unable to handle kernel paging request at virtual address 003d454d414e5675
> >> ...
> >> [003d454d414e5675] address between user and kernel address ranges
> >> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> >> Modules linked in:
> >> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> >> Hardware name: Samsung TM2E board (DT)
> >> Workqueue: events_unbound deferred_probe_work_func
> >> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >> pc : drm_connector_list_iter_next+0x58/0x100
> >> lr : drm_connector_list_iter_next+0x2c/0x100
> >> sp : ffff80000bbab910
> >> ...
> >> Call trace:
> >>    drm_connector_list_iter_next+0x58/0x100
> >>    drm_mode_config_reset+0xfc/0x144
> >>    exynos_drm_bind+0x160/0x1b8
> >>    try_to_bring_up_aggregate_device+0x168/0x1d4
> >>    __component_add+0xa8/0x170
> >>    component_add+0x14/0x20
> >>    hdmi_probe+0x3fc/0x6d4
> >>    platform_probe+0x68/0xd8
> >>    really_probe+0x148/0x2b4
> >>    __driver_probe_device+0x78/0xe0
> >>    driver_probe_device+0xd8/0x160
> >>    __device_attach_driver+0xb8/0x138
> >>    bus_for_each_drv+0x84/0xe0
> >>    __device_attach+0xa8/0x1b0
> >>    device_initial_probe+0x14/0x20
> >>    bus_probe_device+0xb0/0xb4
> >>    deferred_probe_work_func+0x8c/0xc8
> >>    process_one_work+0x288/0x6c8
> >>    worker_thread+0x24c/0x450
> >>    kthread+0x118/0x11c
> >>    ret_from_fork+0x10/0x20
> > This looks not related to dsi to me since there is no exynos_drm_dsi
> > call in the trace. look hdmi related. Moreover, I think the exynos dsi
> > worked well on v10 and I couldn't find any potential differences in
> > terms of call flow change.
> > https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>
> Well, the issue is definitely related to this patchset. On Friday, due
> to other kernel messages, I missed the most important part of the log:
>
> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> device
> exynos-dsi 13900000.dsi: request interrupt failed with -22
> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>
> It looks that the are at least 2 issues. The first one related to TE
> interrupt registration, the second is broken error path, which should
> free allocated resources and stop DRM from binding/initialization.
>
> This patch fixes the issue (TE gpio/interrupt is optional!):
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> b/drivers/gpu/drm/bridge/samsung-dsim.c
> index b4a5348b763c..ed83495fe105 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> samsung_dsim *dsi, struct device
>          int ret;
>
>          dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> -       if (IS_ERR(dsi->te_gpio))
> +       if (!dsi->te_gpio)
> +               return 0;
> +       else if (IS_ERR(dsi->te_gpio))

I think I missed this change from v10 where Marek V commented to move
this in dsim instead of in Exynos. anyway, I will correct this.

>                  return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> "failed to get te GPIO\n");
>
>          te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>
>
> The error path in samsung_dsim_host_attach() after
> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> the allocated resources (removing the bridge, detaing the dsi device).

This is because of the same discussion of moving TE GPIO in dsim instead exynos.

How about register TE GPIO before calling host attach like this,

--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
mipi_dsi_host *host,

        drm_bridge_add(&dsi->bridge);

-       if (pdata->host_ops && pdata->host_ops->attach)
-               pdata->host_ops->attach(dsi, device);
-
        /*
         * This is a temporary solution and should be made by more generic way.
         *
@@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
mipi_dsi_host *host,
                        return ret;
        }

+       if (pdata->host_ops && pdata->host_ops->attach)
+               pdata->host_ops->attach(dsi, device);
+
        dsi->lanes = device->lanes;
        dsi->format = device->format;
        dsi->mode_flags = device->mode_flags;

Would you please check this?

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Dear Jagan,

On 06.03.2023 18:24, Jagan Teki wrote:
> On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 04.03.2023 19:59, Jagan Teki wrote:
>>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> On 03.03.2023 15:51, Jagan Teki wrote:
>>>>> This series supports common bridge support for Samsung MIPI DSIM
>>>>> which is used in Exynos and i.MX8MM SoC's.
>>>>>
>>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>>>
>>>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>>>> since few exynos dsi changes are not been part of drm-misc-next.
>>>>> Request you to pick these via exynos-drm-next, or let me know if you
>>>>> have any comments?
>>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>>>
>>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>>>> ...
>>>> [003d454d414e5675] address between user and kernel address ranges
>>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>>>> Modules linked in:
>>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>>>> Hardware name: Samsung TM2E board (DT)
>>>> Workqueue: events_unbound deferred_probe_work_func
>>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>>> pc : drm_connector_list_iter_next+0x58/0x100
>>>> lr : drm_connector_list_iter_next+0x2c/0x100
>>>> sp : ffff80000bbab910
>>>> ...
>>>> Call trace:
>>>>     drm_connector_list_iter_next+0x58/0x100
>>>>     drm_mode_config_reset+0xfc/0x144
>>>>     exynos_drm_bind+0x160/0x1b8
>>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
>>>>     __component_add+0xa8/0x170
>>>>     component_add+0x14/0x20
>>>>     hdmi_probe+0x3fc/0x6d4
>>>>     platform_probe+0x68/0xd8
>>>>     really_probe+0x148/0x2b4
>>>>     __driver_probe_device+0x78/0xe0
>>>>     driver_probe_device+0xd8/0x160
>>>>     __device_attach_driver+0xb8/0x138
>>>>     bus_for_each_drv+0x84/0xe0
>>>>     __device_attach+0xa8/0x1b0
>>>>     device_initial_probe+0x14/0x20
>>>>     bus_probe_device+0xb0/0xb4
>>>>     deferred_probe_work_func+0x8c/0xc8
>>>>     process_one_work+0x288/0x6c8
>>>>     worker_thread+0x24c/0x450
>>>>     kthread+0x118/0x11c
>>>>     ret_from_fork+0x10/0x20
>>> This looks not related to dsi to me since there is no exynos_drm_dsi
>>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
>>> worked well on v10 and I couldn't find any potential differences in
>>> terms of call flow change.
>>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>> Well, the issue is definitely related to this patchset. On Friday, due
>> to other kernel messages, I missed the most important part of the log:
>>
>> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
>> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
>> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
>> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
>> device
>> exynos-dsi 13900000.dsi: request interrupt failed with -22
>> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
>> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
>> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>>
>> It looks that the are at least 2 issues. The first one related to TE
>> interrupt registration, the second is broken error path, which should
>> free allocated resources and stop DRM from binding/initialization.
>>
>> This patch fixes the issue (TE gpio/interrupt is optional!):
>>
>> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
>> b/drivers/gpu/drm/bridge/samsung-dsim.c
>> index b4a5348b763c..ed83495fe105 100644
>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
>> samsung_dsim *dsi, struct device
>>           int ret;
>>
>>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
>> -       if (IS_ERR(dsi->te_gpio))
>> +       if (!dsi->te_gpio)
>> +               return 0;
>> +       else if (IS_ERR(dsi->te_gpio))
> I think I missed this change from v10 where Marek V commented to move
> this in dsim instead of in Exynos. anyway, I will correct this.
>
>>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
>> "failed to get te GPIO\n");
>>
>>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>>
>>
>> The error path in samsung_dsim_host_attach() after
>> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
>> the allocated resources (removing the bridge, detaing the dsi device).
> This is because of the same discussion of moving TE GPIO in dsim instead exynos.

Well, I'm not very happy about adding more and more features/changes to 
this single patch. I think that once we got the first version that was 
working on both Exynos and IMX, all other changes should be done 
incrementally to avoid this kind of issues...


> How about register TE GPIO before calling host attach like this,
>
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> mipi_dsi_host *host,
>
>          drm_bridge_add(&dsi->bridge);
>
> -       if (pdata->host_ops && pdata->host_ops->attach)
> -               pdata->host_ops->attach(dsi, device);
> -
>          /*
>           * This is a temporary solution and should be made by more generic way.
>           *
> @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> mipi_dsi_host *host,
>                          return ret;
>          }
>
> +       if (pdata->host_ops && pdata->host_ops->attach)
> +               pdata->host_ops->attach(dsi, device);
> +
>          dsi->lanes = device->lanes;
>          dsi->format = device->format;
>          dsi->mode_flags = device->mode_flags;
>
> Would you please check this?

Yes. This fixes the error path.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Dear Jagan,

On 06.03.2023 18:24, Jagan Teki wrote:
> On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 04.03.2023 19:59, Jagan Teki wrote:
>>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> On 03.03.2023 15:51, Jagan Teki wrote:
>>>>> This series supports common bridge support for Samsung MIPI DSIM
>>>>> which is used in Exynos and i.MX8MM SoC's.
>>>>>
>>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>>>
>>>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>>>> since few exynos dsi changes are not been part of drm-misc-next.
>>>>> Request you to pick these via exynos-drm-next, or let me know if you
>>>>> have any comments?
>>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>>>
>>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>>>> ...
>>>> [003d454d414e5675] address between user and kernel address ranges
>>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>>>> Modules linked in:
>>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>>>> Hardware name: Samsung TM2E board (DT)
>>>> Workqueue: events_unbound deferred_probe_work_func
>>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>>> pc : drm_connector_list_iter_next+0x58/0x100
>>>> lr : drm_connector_list_iter_next+0x2c/0x100
>>>> sp : ffff80000bbab910
>>>> ...
>>>> Call trace:
>>>>     drm_connector_list_iter_next+0x58/0x100
>>>>     drm_mode_config_reset+0xfc/0x144
>>>>     exynos_drm_bind+0x160/0x1b8
>>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
>>>>     __component_add+0xa8/0x170
>>>>     component_add+0x14/0x20
>>>>     hdmi_probe+0x3fc/0x6d4
>>>>     platform_probe+0x68/0xd8
>>>>     really_probe+0x148/0x2b4
>>>>     __driver_probe_device+0x78/0xe0
>>>>     driver_probe_device+0xd8/0x160
>>>>     __device_attach_driver+0xb8/0x138
>>>>     bus_for_each_drv+0x84/0xe0
>>>>     __device_attach+0xa8/0x1b0
>>>>     device_initial_probe+0x14/0x20
>>>>     bus_probe_device+0xb0/0xb4
>>>>     deferred_probe_work_func+0x8c/0xc8
>>>>     process_one_work+0x288/0x6c8
>>>>     worker_thread+0x24c/0x450
>>>>     kthread+0x118/0x11c
>>>>     ret_from_fork+0x10/0x20
>>> This looks not related to dsi to me since there is no exynos_drm_dsi
>>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
>>> worked well on v10 and I couldn't find any potential differences in
>>> terms of call flow change.
>>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>> Well, the issue is definitely related to this patchset. On Friday, due
>> to other kernel messages, I missed the most important part of the log:
>>
>> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
>> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
>> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
>> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
>> device
>> exynos-dsi 13900000.dsi: request interrupt failed with -22
>> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
>> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
>> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>>
>> It looks that the are at least 2 issues. The first one related to TE
>> interrupt registration, the second is broken error path, which should
>> free allocated resources and stop DRM from binding/initialization.
>>
>> This patch fixes the issue (TE gpio/interrupt is optional!):
>>
>> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
>> b/drivers/gpu/drm/bridge/samsung-dsim.c
>> index b4a5348b763c..ed83495fe105 100644
>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
>> samsung_dsim *dsi, struct device
>>           int ret;
>>
>>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
>> -       if (IS_ERR(dsi->te_gpio))
>> +       if (!dsi->te_gpio)
>> +               return 0;
>> +       else if (IS_ERR(dsi->te_gpio))
> I think I missed this change from v10 where Marek V commented to move
> this in dsim instead of in Exynos. anyway, I will correct this.
>
>>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
>> "failed to get te GPIO\n");
>>
>>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>>
>>
>> The error path in samsung_dsim_host_attach() after
>> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
>> the allocated resources (removing the bridge, detaing the dsi device).
> This is because of the same discussion of moving TE GPIO in dsim instead exynos.

Well, I'm not very happy about adding more and more features/changes to 
this single patch. I think that once we got the first version that was 
working on both Exynos and IMX, all other changes should be done 
incrementally to avoid this kind of issues...


> How about register TE GPIO before calling host attach like this,
>
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> mipi_dsi_host *host,
>
>          drm_bridge_add(&dsi->bridge);
>
> -       if (pdata->host_ops && pdata->host_ops->attach)
> -               pdata->host_ops->attach(dsi, device);
> -
>          /*
>           * This is a temporary solution and should be made by more generic way.
>           *
> @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> mipi_dsi_host *host,
>                          return ret;
>          }
>
> +       if (pdata->host_ops && pdata->host_ops->attach)
> +               pdata->host_ops->attach(dsi, device);
> +
>          dsi->lanes = device->lanes;
>          dsi->format = device->format;
>          dsi->mode_flags = device->mode_flags;
>
> Would you please check this?

Yes. This fixes the error path.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Dear Jagan,
>
> On 06.03.2023 18:24, Jagan Teki wrote:
> > On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 04.03.2023 19:59, Jagan Teki wrote:
> >>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> >>> <m.szyprowski@samsung.com> wrote:
> >>>> On 03.03.2023 15:51, Jagan Teki wrote:
> >>>>> This series supports common bridge support for Samsung MIPI DSIM
> >>>>> which is used in Exynos and i.MX8MM SoC's.
> >>>>>
> >>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >>>>>
> >>>>> Inki Dae: please note that this series added on top of exynos-drm-next
> >>>>> since few exynos dsi changes are not been part of drm-misc-next.
> >>>>> Request you to pick these via exynos-drm-next, or let me know if you
> >>>>> have any comments?
> >>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> >>>>
> >>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> >>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
> >>>> ...
> >>>> [003d454d414e5675] address between user and kernel address ranges
> >>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> >>>> Modules linked in:
> >>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> >>>> Hardware name: Samsung TM2E board (DT)
> >>>> Workqueue: events_unbound deferred_probe_work_func
> >>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >>>> pc : drm_connector_list_iter_next+0x58/0x100
> >>>> lr : drm_connector_list_iter_next+0x2c/0x100
> >>>> sp : ffff80000bbab910
> >>>> ...
> >>>> Call trace:
> >>>>     drm_connector_list_iter_next+0x58/0x100
> >>>>     drm_mode_config_reset+0xfc/0x144
> >>>>     exynos_drm_bind+0x160/0x1b8
> >>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
> >>>>     __component_add+0xa8/0x170
> >>>>     component_add+0x14/0x20
> >>>>     hdmi_probe+0x3fc/0x6d4
> >>>>     platform_probe+0x68/0xd8
> >>>>     really_probe+0x148/0x2b4
> >>>>     __driver_probe_device+0x78/0xe0
> >>>>     driver_probe_device+0xd8/0x160
> >>>>     __device_attach_driver+0xb8/0x138
> >>>>     bus_for_each_drv+0x84/0xe0
> >>>>     __device_attach+0xa8/0x1b0
> >>>>     device_initial_probe+0x14/0x20
> >>>>     bus_probe_device+0xb0/0xb4
> >>>>     deferred_probe_work_func+0x8c/0xc8
> >>>>     process_one_work+0x288/0x6c8
> >>>>     worker_thread+0x24c/0x450
> >>>>     kthread+0x118/0x11c
> >>>>     ret_from_fork+0x10/0x20
> >>> This looks not related to dsi to me since there is no exynos_drm_dsi
> >>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> >>> worked well on v10 and I couldn't find any potential differences in
> >>> terms of call flow change.
> >>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
> >> Well, the issue is definitely related to this patchset. On Friday, due
> >> to other kernel messages, I missed the most important part of the log:
> >>
> >> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> >> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> >> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> >> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> >> device
> >> exynos-dsi 13900000.dsi: request interrupt failed with -22
> >> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> >> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> >> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
> >>
> >> It looks that the are at least 2 issues. The first one related to TE
> >> interrupt registration, the second is broken error path, which should
> >> free allocated resources and stop DRM from binding/initialization.
> >>
> >> This patch fixes the issue (TE gpio/interrupt is optional!):
> >>
> >> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> >> b/drivers/gpu/drm/bridge/samsung-dsim.c
> >> index b4a5348b763c..ed83495fe105 100644
> >> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> >> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> >> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> >> samsung_dsim *dsi, struct device
> >>           int ret;
> >>
> >>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> >> -       if (IS_ERR(dsi->te_gpio))
> >> +       if (!dsi->te_gpio)
> >> +               return 0;
> >> +       else if (IS_ERR(dsi->te_gpio))
> > I think I missed this change from v10 where Marek V commented to move
> > this in dsim instead of in Exynos. anyway, I will correct this.
> >
> >>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> >> "failed to get te GPIO\n");
> >>
> >>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
> >>
> >>
> >> The error path in samsung_dsim_host_attach() after
> >> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> >> the allocated resources (removing the bridge, detaing the dsi device).
> > This is because of the same discussion of moving TE GPIO in dsim instead exynos.
>
> Well, I'm not very happy about adding more and more features/changes to
> this single patch. I think that once we got the first version that was
> working on both Exynos and IMX, all other changes should be done
> incrementally to avoid this kind of issues...

This is what I thought too, v10 was that ready to merge patchset.
Since it was delayed it is obvious to have more comments from other
developers in the community. This is what happened with the TE GPIO
change.

>
>
> > How about register TE GPIO before calling host attach like this,
> >
> > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> > mipi_dsi_host *host,
> >
> >          drm_bridge_add(&dsi->bridge);
> >
> > -       if (pdata->host_ops && pdata->host_ops->attach)
> > -               pdata->host_ops->attach(dsi, device);
> > -
> >          /*
> >           * This is a temporary solution and should be made by more generic way.
> >           *
> > @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> > mipi_dsi_host *host,
> >                          return ret;
> >          }
> >
> > +       if (pdata->host_ops && pdata->host_ops->attach)
> > +               pdata->host_ops->attach(dsi, device);
> > +
> >          dsi->lanes = device->lanes;
> >          dsi->format = device->format;
> >          dsi->mode_flags = device->mode_flags;
> >
> > Would you please check this?
>
> Yes. This fixes the error path.

Okay. I'm sending v16 with the above two changes.

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Dear Jagan,
>
> On 06.03.2023 18:24, Jagan Teki wrote:
> > On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 04.03.2023 19:59, Jagan Teki wrote:
> >>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> >>> <m.szyprowski@samsung.com> wrote:
> >>>> On 03.03.2023 15:51, Jagan Teki wrote:
> >>>>> This series supports common bridge support for Samsung MIPI DSIM
> >>>>> which is used in Exynos and i.MX8MM SoC's.
> >>>>>
> >>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> >>>>>
> >>>>> Inki Dae: please note that this series added on top of exynos-drm-next
> >>>>> since few exynos dsi changes are not been part of drm-misc-next.
> >>>>> Request you to pick these via exynos-drm-next, or let me know if you
> >>>>> have any comments?
> >>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> >>>>
> >>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> >>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
> >>>> ...
> >>>> [003d454d414e5675] address between user and kernel address ranges
> >>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> >>>> Modules linked in:
> >>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> >>>> Hardware name: Samsung TM2E board (DT)
> >>>> Workqueue: events_unbound deferred_probe_work_func
> >>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >>>> pc : drm_connector_list_iter_next+0x58/0x100
> >>>> lr : drm_connector_list_iter_next+0x2c/0x100
> >>>> sp : ffff80000bbab910
> >>>> ...
> >>>> Call trace:
> >>>>     drm_connector_list_iter_next+0x58/0x100
> >>>>     drm_mode_config_reset+0xfc/0x144
> >>>>     exynos_drm_bind+0x160/0x1b8
> >>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
> >>>>     __component_add+0xa8/0x170
> >>>>     component_add+0x14/0x20
> >>>>     hdmi_probe+0x3fc/0x6d4
> >>>>     platform_probe+0x68/0xd8
> >>>>     really_probe+0x148/0x2b4
> >>>>     __driver_probe_device+0x78/0xe0
> >>>>     driver_probe_device+0xd8/0x160
> >>>>     __device_attach_driver+0xb8/0x138
> >>>>     bus_for_each_drv+0x84/0xe0
> >>>>     __device_attach+0xa8/0x1b0
> >>>>     device_initial_probe+0x14/0x20
> >>>>     bus_probe_device+0xb0/0xb4
> >>>>     deferred_probe_work_func+0x8c/0xc8
> >>>>     process_one_work+0x288/0x6c8
> >>>>     worker_thread+0x24c/0x450
> >>>>     kthread+0x118/0x11c
> >>>>     ret_from_fork+0x10/0x20
> >>> This looks not related to dsi to me since there is no exynos_drm_dsi
> >>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> >>> worked well on v10 and I couldn't find any potential differences in
> >>> terms of call flow change.
> >>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
> >> Well, the issue is definitely related to this patchset. On Friday, due
> >> to other kernel messages, I missed the most important part of the log:
> >>
> >> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> >> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> >> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> >> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> >> device
> >> exynos-dsi 13900000.dsi: request interrupt failed with -22
> >> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> >> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> >> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
> >>
> >> It looks that the are at least 2 issues. The first one related to TE
> >> interrupt registration, the second is broken error path, which should
> >> free allocated resources and stop DRM from binding/initialization.
> >>
> >> This patch fixes the issue (TE gpio/interrupt is optional!):
> >>
> >> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> >> b/drivers/gpu/drm/bridge/samsung-dsim.c
> >> index b4a5348b763c..ed83495fe105 100644
> >> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> >> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> >> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> >> samsung_dsim *dsi, struct device
> >>           int ret;
> >>
> >>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> >> -       if (IS_ERR(dsi->te_gpio))
> >> +       if (!dsi->te_gpio)
> >> +               return 0;
> >> +       else if (IS_ERR(dsi->te_gpio))
> > I think I missed this change from v10 where Marek V commented to move
> > this in dsim instead of in Exynos. anyway, I will correct this.
> >
> >>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> >> "failed to get te GPIO\n");
> >>
> >>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
> >>
> >>
> >> The error path in samsung_dsim_host_attach() after
> >> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> >> the allocated resources (removing the bridge, detaing the dsi device).
> > This is because of the same discussion of moving TE GPIO in dsim instead exynos.
>
> Well, I'm not very happy about adding more and more features/changes to
> this single patch. I think that once we got the first version that was
> working on both Exynos and IMX, all other changes should be done
> incrementally to avoid this kind of issues...

This is what I thought too, v10 was that ready to merge patchset.
Since it was delayed it is obvious to have more comments from other
developers in the community. This is what happened with the TE GPIO
change.

>
>
> > How about register TE GPIO before calling host attach like this,
> >
> > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> > mipi_dsi_host *host,
> >
> >          drm_bridge_add(&dsi->bridge);
> >
> > -       if (pdata->host_ops && pdata->host_ops->attach)
> > -               pdata->host_ops->attach(dsi, device);
> > -
> >          /*
> >           * This is a temporary solution and should be made by more generic way.
> >           *
> > @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> > mipi_dsi_host *host,
> >                          return ret;
> >          }
> >
> > +       if (pdata->host_ops && pdata->host_ops->attach)
> > +               pdata->host_ops->attach(dsi, device);
> > +
> >          dsi->lanes = device->lanes;
> >          dsi->format = device->format;
> >          dsi->mode_flags = device->mode_flags;
> >
> > Would you please check this?
>
> Yes. This fixes the error path.

Okay. I'm sending v16 with the above two changes.

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Tue, Mar 7, 2023 at 1:25 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Hi Marek,
>
> On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
> >
> > Dear Jagan,
> >
> > On 06.03.2023 18:24, Jagan Teki wrote:
> > > On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> > > <m.szyprowski@samsung.com> wrote:
> > >> On 04.03.2023 19:59, Jagan Teki wrote:
> > >>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> > >>> <m.szyprowski@samsung.com> wrote:
> > >>>> On 03.03.2023 15:51, Jagan Teki wrote:
> > >>>>> This series supports common bridge support for Samsung MIPI DSIM
> > >>>>> which is used in Exynos and i.MX8MM SoC's.
> > >>>>>
> > >>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> > >>>>>
> > >>>>> Inki Dae: please note that this series added on top of exynos-drm-next
> > >>>>> since few exynos dsi changes are not been part of drm-misc-next.
> > >>>>> Request you to pick these via exynos-drm-next, or let me know if you
> > >>>>> have any comments?
> > >>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> > >>>>
> > >>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> > >>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
> > >>>> ...
> > >>>> [003d454d414e5675] address between user and kernel address ranges
> > >>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> > >>>> Modules linked in:
> > >>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> > >>>> Hardware name: Samsung TM2E board (DT)
> > >>>> Workqueue: events_unbound deferred_probe_work_func
> > >>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > >>>> pc : drm_connector_list_iter_next+0x58/0x100
> > >>>> lr : drm_connector_list_iter_next+0x2c/0x100
> > >>>> sp : ffff80000bbab910
> > >>>> ...
> > >>>> Call trace:
> > >>>>     drm_connector_list_iter_next+0x58/0x100
> > >>>>     drm_mode_config_reset+0xfc/0x144
> > >>>>     exynos_drm_bind+0x160/0x1b8
> > >>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
> > >>>>     __component_add+0xa8/0x170
> > >>>>     component_add+0x14/0x20
> > >>>>     hdmi_probe+0x3fc/0x6d4
> > >>>>     platform_probe+0x68/0xd8
> > >>>>     really_probe+0x148/0x2b4
> > >>>>     __driver_probe_device+0x78/0xe0
> > >>>>     driver_probe_device+0xd8/0x160
> > >>>>     __device_attach_driver+0xb8/0x138
> > >>>>     bus_for_each_drv+0x84/0xe0
> > >>>>     __device_attach+0xa8/0x1b0
> > >>>>     device_initial_probe+0x14/0x20
> > >>>>     bus_probe_device+0xb0/0xb4
> > >>>>     deferred_probe_work_func+0x8c/0xc8
> > >>>>     process_one_work+0x288/0x6c8
> > >>>>     worker_thread+0x24c/0x450
> > >>>>     kthread+0x118/0x11c
> > >>>>     ret_from_fork+0x10/0x20
> > >>> This looks not related to dsi to me since there is no exynos_drm_dsi
> > >>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> > >>> worked well on v10 and I couldn't find any potential differences in
> > >>> terms of call flow change.
> > >>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
> > >> Well, the issue is definitely related to this patchset. On Friday, due
> > >> to other kernel messages, I missed the most important part of the log:
> > >>
> > >> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> > >> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> > >> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> > >> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> > >> device
> > >> exynos-dsi 13900000.dsi: request interrupt failed with -22
> > >> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> > >> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> > >> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
> > >>
> > >> It looks that the are at least 2 issues. The first one related to TE
> > >> interrupt registration, the second is broken error path, which should
> > >> free allocated resources and stop DRM from binding/initialization.
> > >>
> > >> This patch fixes the issue (TE gpio/interrupt is optional!):
> > >>
> > >> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> b/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> index b4a5348b763c..ed83495fe105 100644
> > >> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> > >> samsung_dsim *dsi, struct device
> > >>           int ret;
> > >>
> > >>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> > >> -       if (IS_ERR(dsi->te_gpio))
> > >> +       if (!dsi->te_gpio)
> > >> +               return 0;
> > >> +       else if (IS_ERR(dsi->te_gpio))
> > > I think I missed this change from v10 where Marek V commented to move
> > > this in dsim instead of in Exynos. anyway, I will correct this.
> > >
> > >>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> > >> "failed to get te GPIO\n");
> > >>
> > >>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
> > >>
> > >>
> > >> The error path in samsung_dsim_host_attach() after
> > >> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> > >> the allocated resources (removing the bridge, detaing the dsi device).
> > > This is because of the same discussion of moving TE GPIO in dsim instead exynos.
> >
> > Well, I'm not very happy about adding more and more features/changes to
> > this single patch. I think that once we got the first version that was
> > working on both Exynos and IMX, all other changes should be done
> > incrementally to avoid this kind of issues...
>
> This is what I thought too, v10 was that ready to merge patchset.
> Since it was delayed it is obvious to have more comments from other
> developers in the community. This is what happened with the TE GPIO
> change.
>
> >
> >
> > > How about register TE GPIO before calling host attach like this,
> > >
> > > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > > @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> > > mipi_dsi_host *host,
> > >
> > >          drm_bridge_add(&dsi->bridge);
> > >
> > > -       if (pdata->host_ops && pdata->host_ops->attach)
> > > -               pdata->host_ops->attach(dsi, device);
> > > -
> > >          /*
> > >           * This is a temporary solution and should be made by more generic way.
> > >           *
> > > @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> > > mipi_dsi_host *host,
> > >                          return ret;
> > >          }
> > >
> > > +       if (pdata->host_ops && pdata->host_ops->attach)
> > > +               pdata->host_ops->attach(dsi, device);
> > > +
> > >          dsi->lanes = device->lanes;
> > >          dsi->format = device->format;
> > >          dsi->mode_flags = device->mode_flags;
> > >
> > > Would you please check this?
> >
> > Yes. This fixes the error path.
>
> Okay. I'm sending v16 with the above two changes.

Would you please test this v16 for confirmation before sending it to
the mailing list?
https://github.com/openedev/kernel/commits/imx8mm-dsi-v16

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Jagan Teki]

Hi Marek,

On Tue, Mar 7, 2023 at 1:25 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Hi Marek,
>
> On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
> >
> > Dear Jagan,
> >
> > On 06.03.2023 18:24, Jagan Teki wrote:
> > > On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
> > > <m.szyprowski@samsung.com> wrote:
> > >> On 04.03.2023 19:59, Jagan Teki wrote:
> > >>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
> > >>> <m.szyprowski@samsung.com> wrote:
> > >>>> On 03.03.2023 15:51, Jagan Teki wrote:
> > >>>>> This series supports common bridge support for Samsung MIPI DSIM
> > >>>>> which is used in Exynos and i.MX8MM SoC's.
> > >>>>>
> > >>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
> > >>>>>
> > >>>>> Inki Dae: please note that this series added on top of exynos-drm-next
> > >>>>> since few exynos dsi changes are not been part of drm-misc-next.
> > >>>>> Request you to pick these via exynos-drm-next, or let me know if you
> > >>>>> have any comments?
> > >>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
> > >>>>
> > >>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
> > >>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
> > >>>> ...
> > >>>> [003d454d414e5675] address between user and kernel address ranges
> > >>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> > >>>> Modules linked in:
> > >>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
> > >>>> Hardware name: Samsung TM2E board (DT)
> > >>>> Workqueue: events_unbound deferred_probe_work_func
> > >>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > >>>> pc : drm_connector_list_iter_next+0x58/0x100
> > >>>> lr : drm_connector_list_iter_next+0x2c/0x100
> > >>>> sp : ffff80000bbab910
> > >>>> ...
> > >>>> Call trace:
> > >>>>     drm_connector_list_iter_next+0x58/0x100
> > >>>>     drm_mode_config_reset+0xfc/0x144
> > >>>>     exynos_drm_bind+0x160/0x1b8
> > >>>>     try_to_bring_up_aggregate_device+0x168/0x1d4
> > >>>>     __component_add+0xa8/0x170
> > >>>>     component_add+0x14/0x20
> > >>>>     hdmi_probe+0x3fc/0x6d4
> > >>>>     platform_probe+0x68/0xd8
> > >>>>     really_probe+0x148/0x2b4
> > >>>>     __driver_probe_device+0x78/0xe0
> > >>>>     driver_probe_device+0xd8/0x160
> > >>>>     __device_attach_driver+0xb8/0x138
> > >>>>     bus_for_each_drv+0x84/0xe0
> > >>>>     __device_attach+0xa8/0x1b0
> > >>>>     device_initial_probe+0x14/0x20
> > >>>>     bus_probe_device+0xb0/0xb4
> > >>>>     deferred_probe_work_func+0x8c/0xc8
> > >>>>     process_one_work+0x288/0x6c8
> > >>>>     worker_thread+0x24c/0x450
> > >>>>     kthread+0x118/0x11c
> > >>>>     ret_from_fork+0x10/0x20
> > >>> This looks not related to dsi to me since there is no exynos_drm_dsi
> > >>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
> > >>> worked well on v10 and I couldn't find any potential differences in
> > >>> terms of call flow change.
> > >>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
> > >> Well, the issue is definitely related to this patchset. On Friday, due
> > >> to other kernel messages, I missed the most important part of the log:
> > >>
> > >> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
> > >> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> > >> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> > >> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
> > >> device
> > >> exynos-dsi 13900000.dsi: request interrupt failed with -22
> > >> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
> > >> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
> > >> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
> > >>
> > >> It looks that the are at least 2 issues. The first one related to TE
> > >> interrupt registration, the second is broken error path, which should
> > >> free allocated resources and stop DRM from binding/initialization.
> > >>
> > >> This patch fixes the issue (TE gpio/interrupt is optional!):
> > >>
> > >> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> b/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> index b4a5348b763c..ed83495fe105 100644
> > >> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > >> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
> > >> samsung_dsim *dsi, struct device
> > >>           int ret;
> > >>
> > >>           dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
> > >> -       if (IS_ERR(dsi->te_gpio))
> > >> +       if (!dsi->te_gpio)
> > >> +               return 0;
> > >> +       else if (IS_ERR(dsi->te_gpio))
> > > I think I missed this change from v10 where Marek V commented to move
> > > this in dsim instead of in Exynos. anyway, I will correct this.
> > >
> > >>                   return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
> > >> "failed to get te GPIO\n");
> > >>
> > >>           te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
> > >>
> > >>
> > >> The error path in samsung_dsim_host_attach() after
> > >> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
> > >> the allocated resources (removing the bridge, detaing the dsi device).
> > > This is because of the same discussion of moving TE GPIO in dsim instead exynos.
> >
> > Well, I'm not very happy about adding more and more features/changes to
> > this single patch. I think that once we got the first version that was
> > working on both Exynos and IMX, all other changes should be done
> > incrementally to avoid this kind of issues...
>
> This is what I thought too, v10 was that ready to merge patchset.
> Since it was delayed it is obvious to have more comments from other
> developers in the community. This is what happened with the TE GPIO
> change.
>
> >
> >
> > > How about register TE GPIO before calling host attach like this,
> > >
> > > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > > @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
> > > mipi_dsi_host *host,
> > >
> > >          drm_bridge_add(&dsi->bridge);
> > >
> > > -       if (pdata->host_ops && pdata->host_ops->attach)
> > > -               pdata->host_ops->attach(dsi, device);
> > > -
> > >          /*
> > >           * This is a temporary solution and should be made by more generic way.
> > >           *
> > > @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
> > > mipi_dsi_host *host,
> > >                          return ret;
> > >          }
> > >
> > > +       if (pdata->host_ops && pdata->host_ops->attach)
> > > +               pdata->host_ops->attach(dsi, device);
> > > +
> > >          dsi->lanes = device->lanes;
> > >          dsi->format = device->format;
> > >          dsi->mode_flags = device->mode_flags;
> > >
> > > Would you please check this?
> >
> > Yes. This fixes the error path.
>
> Okay. I'm sending v16 with the above two changes.

Would you please test this v16 for confirmation before sending it to
the mailing list?
https://github.com/openedev/kernel/commits/imx8mm-dsi-v16

Thanks,
Jagan.

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hello,

On 07.03.2023 10:22, Jagan Teki wrote:
> On Tue, Mar 7, 2023 at 1:25 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>> On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
>> <m.szyprowski@samsung.com> wrote:
>>> On 06.03.2023 18:24, Jagan Teki wrote:
>>>> On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
>>>> <m.szyprowski@samsung.com> wrote:
>>>>> On 04.03.2023 19:59, Jagan Teki wrote:
>>>>>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
>>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>>> On 03.03.2023 15:51, Jagan Teki wrote:
>>>>>>>> This series supports common bridge support for Samsung MIPI DSIM
>>>>>>>> which is used in Exynos and i.MX8MM SoC's.
>>>>>>>>
>>>>>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>>>>>>
>>>>>>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>>>>>>> since few exynos dsi changes are not been part of drm-misc-next.
>>>>>>>> Request you to pick these via exynos-drm-next, or let me know if you
>>>>>>>> have any comments?
>>>>>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>>>>>>
>>>>>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>>>>>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>>>>>>> ...
>>>>>>> [003d454d414e5675] address between user and kernel address ranges
>>>>>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>>>>>>> Modules linked in:
>>>>>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>>>>>>> Hardware name: Samsung TM2E board (DT)
>>>>>>> Workqueue: events_unbound deferred_probe_work_func
>>>>>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>>>>>> pc : drm_connector_list_iter_next+0x58/0x100
>>>>>>> lr : drm_connector_list_iter_next+0x2c/0x100
>>>>>>> sp : ffff80000bbab910
>>>>>>> ...
>>>>>>> Call trace:
>>>>>>>      drm_connector_list_iter_next+0x58/0x100
>>>>>>>      drm_mode_config_reset+0xfc/0x144
>>>>>>>      exynos_drm_bind+0x160/0x1b8
>>>>>>>      try_to_bring_up_aggregate_device+0x168/0x1d4
>>>>>>>      __component_add+0xa8/0x170
>>>>>>>      component_add+0x14/0x20
>>>>>>>      hdmi_probe+0x3fc/0x6d4
>>>>>>>      platform_probe+0x68/0xd8
>>>>>>>      really_probe+0x148/0x2b4
>>>>>>>      __driver_probe_device+0x78/0xe0
>>>>>>>      driver_probe_device+0xd8/0x160
>>>>>>>      __device_attach_driver+0xb8/0x138
>>>>>>>      bus_for_each_drv+0x84/0xe0
>>>>>>>      __device_attach+0xa8/0x1b0
>>>>>>>      device_initial_probe+0x14/0x20
>>>>>>>      bus_probe_device+0xb0/0xb4
>>>>>>>      deferred_probe_work_func+0x8c/0xc8
>>>>>>>      process_one_work+0x288/0x6c8
>>>>>>>      worker_thread+0x24c/0x450
>>>>>>>      kthread+0x118/0x11c
>>>>>>>      ret_from_fork+0x10/0x20
>>>>>> This looks not related to dsi to me since there is no exynos_drm_dsi
>>>>>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
>>>>>> worked well on v10 and I couldn't find any potential differences in
>>>>>> terms of call flow change.
>>>>>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>>>>> Well, the issue is definitely related to this patchset. On Friday, due
>>>>> to other kernel messages, I missed the most important part of the log:
>>>>>
>>>>> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
>>>>> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
>>>>> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
>>>>> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
>>>>> device
>>>>> exynos-dsi 13900000.dsi: request interrupt failed with -22
>>>>> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
>>>>> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
>>>>> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>>>>>
>>>>> It looks that the are at least 2 issues. The first one related to TE
>>>>> interrupt registration, the second is broken error path, which should
>>>>> free allocated resources and stop DRM from binding/initialization.
>>>>>
>>>>> This patch fixes the issue (TE gpio/interrupt is optional!):
>>>>>
>>>>> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> index b4a5348b763c..ed83495fe105 100644
>>>>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
>>>>> samsung_dsim *dsi, struct device
>>>>>            int ret;
>>>>>
>>>>>            dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
>>>>> -       if (IS_ERR(dsi->te_gpio))
>>>>> +       if (!dsi->te_gpio)
>>>>> +               return 0;
>>>>> +       else if (IS_ERR(dsi->te_gpio))
>>>> I think I missed this change from v10 where Marek V commented to move
>>>> this in dsim instead of in Exynos. anyway, I will correct this.
>>>>
>>>>>                    return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
>>>>> "failed to get te GPIO\n");
>>>>>
>>>>>            te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>>>>>
>>>>>
>>>>> The error path in samsung_dsim_host_attach() after
>>>>> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
>>>>> the allocated resources (removing the bridge, detaing the dsi device).
>>>> This is because of the same discussion of moving TE GPIO in dsim instead exynos.
>>> Well, I'm not very happy about adding more and more features/changes to
>>> this single patch. I think that once we got the first version that was
>>> working on both Exynos and IMX, all other changes should be done
>>> incrementally to avoid this kind of issues...
>> This is what I thought too, v10 was that ready to merge patchset.
>> Since it was delayed it is obvious to have more comments from other
>> developers in the community. This is what happened with the TE GPIO
>> change.
>>
>>>
>>>> How about register TE GPIO before calling host attach like this,
>>>>
>>>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>> @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
>>>> mipi_dsi_host *host,
>>>>
>>>>           drm_bridge_add(&dsi->bridge);
>>>>
>>>> -       if (pdata->host_ops && pdata->host_ops->attach)
>>>> -               pdata->host_ops->attach(dsi, device);
>>>> -
>>>>           /*
>>>>            * This is a temporary solution and should be made by more generic way.
>>>>            *
>>>> @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
>>>> mipi_dsi_host *host,
>>>>                           return ret;
>>>>           }
>>>>
>>>> +       if (pdata->host_ops && pdata->host_ops->attach)
>>>> +               pdata->host_ops->attach(dsi, device);
>>>> +
>>>>           dsi->lanes = device->lanes;
>>>>           dsi->format = device->format;
>>>>           dsi->mode_flags = device->mode_flags;
>>>>
>>>> Would you please check this?
>>> Yes. This fixes the error path.
>> Okay. I'm sending v16 with the above two changes.
> Would you please test this v16 for confirmation before sending it to
> the mailing list?

v16 works fine here. Feel free to add:

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

to the Exynos related patches (if there is still no such tag yet).


Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Marek Szyprowski]

Hello,

On 07.03.2023 10:22, Jagan Teki wrote:
> On Tue, Mar 7, 2023 at 1:25 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>> On Tue, Mar 7, 2023 at 4:11 AM Marek Szyprowski
>> <m.szyprowski@samsung.com> wrote:
>>> On 06.03.2023 18:24, Jagan Teki wrote:
>>>> On Mon, Mar 6, 2023 at 4:32 PM Marek Szyprowski
>>>> <m.szyprowski@samsung.com> wrote:
>>>>> On 04.03.2023 19:59, Jagan Teki wrote:
>>>>>> On Sat, Mar 4, 2023 at 3:56 AM Marek Szyprowski
>>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>>> On 03.03.2023 15:51, Jagan Teki wrote:
>>>>>>>> This series supports common bridge support for Samsung MIPI DSIM
>>>>>>>> which is used in Exynos and i.MX8MM SoC's.
>>>>>>>>
>>>>>>>> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>>>>>>>>
>>>>>>>> Inki Dae: please note that this series added on top of exynos-drm-next
>>>>>>>> since few exynos dsi changes are not been part of drm-misc-next.
>>>>>>>> Request you to pick these via exynos-drm-next, or let me know if you
>>>>>>>> have any comments?
>>>>>>> I gave it a try on Exynos TM2e and unfortunately it nukes again:
>>>>>>>
>>>>>>> exynos-drm exynos-drm: bound 13970000.hdmi (ops hdmi_component_ops)
>>>>>>> Unable to handle kernel paging request at virtual address 003d454d414e5675
>>>>>>> ...
>>>>>>> [003d454d414e5675] address between user and kernel address ranges
>>>>>>> Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
>>>>>>> Modules linked in:
>>>>>>> CPU: 4 PID: 9 Comm: kworker/u16:0 Not tainted 6.2.0-next-20230303+ #13341
>>>>>>> Hardware name: Samsung TM2E board (DT)
>>>>>>> Workqueue: events_unbound deferred_probe_work_func
>>>>>>> pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>>>>>> pc : drm_connector_list_iter_next+0x58/0x100
>>>>>>> lr : drm_connector_list_iter_next+0x2c/0x100
>>>>>>> sp : ffff80000bbab910
>>>>>>> ...
>>>>>>> Call trace:
>>>>>>>      drm_connector_list_iter_next+0x58/0x100
>>>>>>>      drm_mode_config_reset+0xfc/0x144
>>>>>>>      exynos_drm_bind+0x160/0x1b8
>>>>>>>      try_to_bring_up_aggregate_device+0x168/0x1d4
>>>>>>>      __component_add+0xa8/0x170
>>>>>>>      component_add+0x14/0x20
>>>>>>>      hdmi_probe+0x3fc/0x6d4
>>>>>>>      platform_probe+0x68/0xd8
>>>>>>>      really_probe+0x148/0x2b4
>>>>>>>      __driver_probe_device+0x78/0xe0
>>>>>>>      driver_probe_device+0xd8/0x160
>>>>>>>      __device_attach_driver+0xb8/0x138
>>>>>>>      bus_for_each_drv+0x84/0xe0
>>>>>>>      __device_attach+0xa8/0x1b0
>>>>>>>      device_initial_probe+0x14/0x20
>>>>>>>      bus_probe_device+0xb0/0xb4
>>>>>>>      deferred_probe_work_func+0x8c/0xc8
>>>>>>>      process_one_work+0x288/0x6c8
>>>>>>>      worker_thread+0x24c/0x450
>>>>>>>      kthread+0x118/0x11c
>>>>>>>      ret_from_fork+0x10/0x20
>>>>>> This looks not related to dsi to me since there is no exynos_drm_dsi
>>>>>> call in the trace. look hdmi related. Moreover, I think the exynos dsi
>>>>>> worked well on v10 and I couldn't find any potential differences in
>>>>>> terms of call flow change.
>>>>>> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v10
>>>>> Well, the issue is definitely related to this patchset. On Friday, due
>>>>> to other kernel messages, I missed the most important part of the log:
>>>>>
>>>>> [drm] Exynos DRM: using 13800000.decon device for DMA mapping operations
>>>>> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
>>>>> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
>>>>> exynos-dsi 13900000.dsi: [drm:samsung_dsim_host_attach] Attached s6e3hf2
>>>>> device
>>>>> exynos-dsi 13900000.dsi: request interrupt failed with -22
>>>>> panel-samsung-s6e3ha2: probe of 13900000.dsi.0 failed with error -22
>>>>> exynos-drm exynos-drm: bound 13900000.dsi (ops exynos_dsi_component_ops)
>>>>> exynos-drm exynos-drm: bound 13930000.mic (ops exynos_mic_component_ops)
>>>>>
>>>>> It looks that the are at least 2 issues. The first one related to TE
>>>>> interrupt registration, the second is broken error path, which should
>>>>> free allocated resources and stop DRM from binding/initialization.
>>>>>
>>>>> This patch fixes the issue (TE gpio/interrupt is optional!):
>>>>>
>>>>> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> index b4a5348b763c..ed83495fe105 100644
>>>>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>>> @@ -1518,7 +1518,9 @@ static int samsung_dsim_register_te_irq(struct
>>>>> samsung_dsim *dsi, struct device
>>>>>            int ret;
>>>>>
>>>>>            dsi->te_gpio = devm_gpiod_get_optional(dev, "te", GPIOD_IN);
>>>>> -       if (IS_ERR(dsi->te_gpio))
>>>>> +       if (!dsi->te_gpio)
>>>>> +               return 0;
>>>>> +       else if (IS_ERR(dsi->te_gpio))
>>>> I think I missed this change from v10 where Marek V commented to move
>>>> this in dsim instead of in Exynos. anyway, I will correct this.
>>>>
>>>>>                    return dev_err_probe(dev, PTR_ERR(dsi->te_gpio),
>>>>> "failed to get te GPIO\n");
>>>>>
>>>>>            te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>>>>>
>>>>>
>>>>> The error path in samsung_dsim_host_attach() after
>>>>> samsung_dsim_register_te_irq() failure is wrong. It lacks cleaning up
>>>>> the allocated resources (removing the bridge, detaing the dsi device).
>>>> This is because of the same discussion of moving TE GPIO in dsim instead exynos.
>>> Well, I'm not very happy about adding more and more features/changes to
>>> this single patch. I think that once we got the first version that was
>>> working on both Exynos and IMX, all other changes should be done
>>> incrementally to avoid this kind of issues...
>> This is what I thought too, v10 was that ready to merge patchset.
>> Since it was delayed it is obvious to have more comments from other
>> developers in the community. This is what happened with the TE GPIO
>> change.
>>
>>>
>>>> How about register TE GPIO before calling host attach like this,
>>>>
>>>> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
>>>> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
>>>> @@ -1598,9 +1598,6 @@ static int samsung_dsim_host_attach(struct
>>>> mipi_dsi_host *host,
>>>>
>>>>           drm_bridge_add(&dsi->bridge);
>>>>
>>>> -       if (pdata->host_ops && pdata->host_ops->attach)
>>>> -               pdata->host_ops->attach(dsi, device);
>>>> -
>>>>           /*
>>>>            * This is a temporary solution and should be made by more generic way.
>>>>            *
>>>> @@ -1613,6 +1610,9 @@ static int samsung_dsim_host_attach(struct
>>>> mipi_dsi_host *host,
>>>>                           return ret;
>>>>           }
>>>>
>>>> +       if (pdata->host_ops && pdata->host_ops->attach)
>>>> +               pdata->host_ops->attach(dsi, device);
>>>> +
>>>>           dsi->lanes = device->lanes;
>>>>           dsi->format = device->format;
>>>>           dsi->mode_flags = device->mode_flags;
>>>>
>>>> Would you please check this?
>>> Yes. This fixes the error path.
>> Okay. I'm sending v16 with the above two changes.
> Would you please test this v16 for confirmation before sending it to
> the mailing list?

v16 works fine here. Feel free to add:

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

to the Exynos related patches (if there is still no such tag yet).


Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Fabio Estevam]

Hi Inki,

On Mon, Mar 6, 2023 at 2:24 AM 대인기/Tizen Platform Lab(SR)/삼성전자
<inki.dae@samsung.com> wrote:

> Seems some issue Marek found on testing. If fixed then I will try to pick this
> patch series up.

Marek has successfully tested v16.

Could you please apply v16?

Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Fabio Estevam]

Hi Inki,

On Mon, Mar 6, 2023 at 2:24 AM 대인기/Tizen Platform Lab(SR)/삼성전자
<inki.dae@samsung.com> wrote:

> Seems some issue Marek found on testing. If fixed then I will try to pick this
> patch series up.

Marek has successfully tested v16.

Could you please apply v16?

Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Inki Dae]

[-- Attachment #1: Type: text/plain, Size: 803 bytes --]

Hi Fabio Estevam,

2023년 3월 14일 (화) 오전 9:31, Fabio Estevam <festevam@gmail.com>님이 작성:

> Hi Inki,
>
> On Mon, Mar 6, 2023 at 2:24 AM 대인기/Tizen Platform Lab(SR)/삼성전자
> <inki.dae@samsung.com> wrote:
>
> > Seems some issue Marek found on testing. If fixed then I will try to
> pick this
> > patch series up.
>
> Marek has successfully tested v16.
>
> Could you please apply v16?
>

I am planning to merge this patch series soon, but I will be proceeding
with the pull-request next week. As the DSIM driver is being moved to the
bridge folder, I would like to wait for acknowledgment from the bridge
maintainers. However, if there are no further comments until next week, I
will proceed with the pull-request.

Thanks,
Inki Dae


> Thanks
>

[-- Attachment #2: Type: text/html, Size: 1480 bytes --]

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Fabio Estevam]

Hi Inki,

On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com> wrote:

>> Could you please apply v16?
>
>
> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.

A friendly reminder: do you think you can proceed with the pull-request now?

Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Fabio Estevam]

Hi Inki,

On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com> wrote:

>> Could you please apply v16?
>
>
> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.

A friendly reminder: do you think you can proceed with the pull-request now?

Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Neil Armstrong]

On 23/03/2023 16:34, Fabio Estevam wrote:
> Hi Inki,
> 
> On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com> wrote:
> 
>>> Could you please apply v16?
>>
>>
>> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.
> 
> A friendly reminder: do you think you can proceed with the pull-request now?

I can apply the entire patchset to drm-misc-needed if needed.

Inki, is it ok for you or you still want to take it in the exynos tree ?

Neil

> 
> Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Neil Armstrong]

On 23/03/2023 16:34, Fabio Estevam wrote:
> Hi Inki,
> 
> On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com> wrote:
> 
>>> Could you please apply v16?
>>
>>
>> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.
> 
> A friendly reminder: do you think you can proceed with the pull-request now?

I can apply the entire patchset to drm-misc-needed if needed.

Inki, is it ok for you or you still want to take it in the exynos tree ?

Neil

> 
> Thanks

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Inki Dae]

[-- Attachment #1: Type: text/plain, Size: 1093 bytes --]

Hi,

2023년 3월 27일 (월) 오후 11:08, Neil Armstrong <neil.armstrong@linaro.org>님이 작성:

> On 23/03/2023 16:34, Fabio Estevam wrote:
> > Hi Inki,
> >
> > On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com> wrote:
> >
> >>> Could you please apply v16?
> >>
> >>
> >> I am planning to merge this patch series soon, but I will be proceeding
> with the pull-request next week. As the DSIM driver is being moved to the
> bridge folder, I would like to wait for acknowledgment from the bridge
> maintainers. However, if there are no further comments until next week, I
> will proceed with the pull-request.
> >
> > A friendly reminder: do you think you can proceed with the pull-request
> now?
>
> I can apply the entire patchset to drm-misc-needed if needed.
>
> Inki, is it ok for you or you still want to take it in the exynos tree ?
>

Sorry for late. I will proceed with pull-request today.

BTW, now is rc4 so we have more time for pull-request. Is there any reason
you hurry up?

Thanks,
Inki Dae


> Neil
>
> >
> > Thanks
>
>

[-- Attachment #2: Type: text/html, Size: 1874 bytes --]

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Neil Armstrong]

On 28/03/2023 02:03, Inki Dae wrote:
> Hi,
> 
> 2023년 3월 27일 (월) 오후 11:08, Neil Armstrong <neil.armstrong@linaro.org <mailto:neil.armstrong@linaro.org>>님이 작성:
> 
>     On 23/03/2023 16:34, Fabio Estevam wrote:
>      > Hi Inki,
>      >
>      > On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com <mailto:daeinki@gmail.com>> wrote:
>      >
>      >>> Could you please apply v16?
>      >>
>      >>
>      >> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.
>      >
>      > A friendly reminder: do you think you can proceed with the pull-request now?
> 
>     I can apply the entire patchset to drm-misc-needed if needed.
> 
>     Inki, is it ok for you or you still want to take it in the exynos tree ?
> 
> 
> Sorry for late. I will proceed with pull-request today.

No problem. ping me if I can help on the bridge side.

> 
> BTW, now is rc4 so we have more time for pull-request. Is there any reason you hurry up?

As Fabio explains, it's v16 and was fully reviewed for a few weeks now, so it's time to LGTM !

Neil

> 
> Thanks,
> Inki Dae
> 
> 
>     Neil
> 
>      >
>      > Thanks
> 

Re: [PATCH v15 00/16] drm: Add Samsung MIPI DSIM bridge

[Neil Armstrong]

On 28/03/2023 02:03, Inki Dae wrote:
> Hi,
> 
> 2023년 3월 27일 (월) 오후 11:08, Neil Armstrong <neil.armstrong@linaro.org <mailto:neil.armstrong@linaro.org>>님이 작성:
> 
>     On 23/03/2023 16:34, Fabio Estevam wrote:
>      > Hi Inki,
>      >
>      > On Mon, Mar 13, 2023 at 9:51 PM Inki Dae <daeinki@gmail.com <mailto:daeinki@gmail.com>> wrote:
>      >
>      >>> Could you please apply v16?
>      >>
>      >>
>      >> I am planning to merge this patch series soon, but I will be proceeding with the pull-request next week. As the DSIM driver is being moved to the bridge folder, I would like to wait for acknowledgment from the bridge maintainers. However, if there are no further comments until next week, I will proceed with the pull-request.
>      >
>      > A friendly reminder: do you think you can proceed with the pull-request now?
> 
>     I can apply the entire patchset to drm-misc-needed if needed.
> 
>     Inki, is it ok for you or you still want to take it in the exynos tree ?
> 
> 
> Sorry for late. I will proceed with pull-request today.

No problem. ping me if I can help on the bridge side.

> 
> BTW, now is rc4 so we have more time for pull-request. Is there any reason you hurry up?

As Fabio explains, it's v16 and was fully reviewed for a few weeks now, so it's time to LGTM !

Neil

> 
> Thanks,
> Inki Dae
> 
> 
>     Neil
> 
>      >
>      > Thanks
>