Re: SCSI bus failures with qemu-arm in kernel 3.8+

[Guenter Roeck <linux@roeck-us.net>]

On 08/11/2013 03:04 PM, Russell King - ARM Linux wrote:
> On Sun, Aug 11, 2013 at 08:54:43AM -0700, Guenter Roeck wrote:
>> Hi,
>>
>> trying to boot arm versatile images with qemu results in the following error
>> if I try to boot with a disk image.
>>
>>       sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 92
>>       sym0: SCSI BUS has been reset.
>>       scsi0 : sym-2.2.3
>>       [...]
>>       scsi 0:0:0:0: ABORT operation started
>>       scsi 0:0:0:0: ABORT operation timed-out.
>>       [...]
>>
>> Yocto's 3.8 kernel images work, upstream kernels 3.8 and later fail
>> (I did not check if/how earlier kernels are affected).
>>
>> Tracking this down shows that the problem is known and has been fixed with
>> commit 351d1339 (arm: add dummy swizzle for versatile with qemu) in the
>> Yocto 3.8 kernel at git://git.yoctoproject.org/linux-yocto-3.8.
>>
>> Would it be possible to submit this patch for inclusion into affected upstream kernels ?
>
> It could be that it's qemu's PCI routing is wrong - it's not the first
> time that qemu has got something wrong.
>
> Unfortunately, the PCI routing is totally undocumented, and as I understand
> it, there's very few backplanes out there now that finding out their real
> routing is virtually impossible.  I'm loathed to change it unless someone
> can point to a definitive source of information on this.
>

Maybe Paul can comment, as he wrote the patch.

If it helps, I tried with qemu 1.4.0 from Ubuntu 13.4, qemu 1.4.0 from Poky 1.4.0-1,
and qemu 1.5.2 from the qemu repository.

Copying qemu-devel to increase the audience.

Guenter