* [PATCH 0/5] dma: don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
I'm patching dw-axi-dmac to add more features, but I found a small
clean up point and some drivers in drivers/dma/ have the same issue,
so this series comes.
The dma framework will calculate the dma channels chancnt, setting it
is wrong.
NOTE: I leav drivers/dma/ioat/ as is, because its logic have a
heavy dependency on chancnt usage, however it's still doable.
Jisheng Zhang (5):
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: sprd: Don't set chancnt
drivers/dma/dma-axi-dmac.c | 1 -
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
drivers/dma/plx_dma.c | 1 -
drivers/dma/qcom/hidma.c | 1 -
drivers/dma/sprd-dma.c | 1 -
5 files changed, 5 deletions(-)
--
2.39.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 0/5] dma: don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
I'm patching dw-axi-dmac to add more features, but I found a small
clean up point and some drivers in drivers/dma/ have the same issue,
so this series comes.
The dma framework will calculate the dma channels chancnt, setting it
is wrong.
NOTE: I leav drivers/dma/ioat/ as is, because its logic have a
heavy dependency on chancnt usage, however it's still doable.
Jisheng Zhang (5):
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: sprd: Don't set chancnt
drivers/dma/dma-axi-dmac.c | 1 -
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
drivers/dma/plx_dma.c | 1 -
drivers/dma/qcom/hidma.c | 1 -
drivers/dma/sprd-dma.c | 1 -
5 files changed, 5 deletions(-)
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/5] dmaengine: dw-axi-dmac: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:02 ` Jisheng Zhang
-1 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 4169e1d7d5ca..7f3a60e28e38 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1445,7 +1445,6 @@ static int dw_probe(struct platform_device *pdev)
dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
/* DMA capabilities */
- dw->dma.chancnt = hdata->nr_channels;
dw->dma.max_burst = hdata->axi_rw_burst_len;
dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
--
2.39.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 1/5] dmaengine: dw-axi-dmac: Don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 4169e1d7d5ca..7f3a60e28e38 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1445,7 +1445,6 @@ static int dw_probe(struct platform_device *pdev)
dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
/* DMA capabilities */
- dw->dma.chancnt = hdata->nr_channels;
dw->dma.max_burst = hdata->axi_rw_burst_len;
dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/5] dmaengine: axi-dmac: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:02 ` Jisheng Zhang
-1 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/dma-axi-dmac.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index a812b9b00e6b..fc7cdad37161 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -963,7 +963,6 @@ static int axi_dmac_probe(struct platform_device *pdev)
dma_dev->device_terminate_all = axi_dmac_terminate_all;
dma_dev->device_synchronize = axi_dmac_synchronize;
dma_dev->dev = &pdev->dev;
- dma_dev->chancnt = 1;
dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
dma_dev->dst_addr_widths = BIT(dmac->chan.dest_width);
dma_dev->directions = BIT(dmac->chan.direction);
--
2.39.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/5] dmaengine: axi-dmac: Don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/dma-axi-dmac.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index a812b9b00e6b..fc7cdad37161 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -963,7 +963,6 @@ static int axi_dmac_probe(struct platform_device *pdev)
dma_dev->device_terminate_all = axi_dmac_terminate_all;
dma_dev->device_synchronize = axi_dmac_synchronize;
dma_dev->dev = &pdev->dev;
- dma_dev->chancnt = 1;
dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
dma_dev->dst_addr_widths = BIT(dmac->chan.dest_width);
dma_dev->directions = BIT(dmac->chan.direction);
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/5] dmaengine: plx_dma: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:02 ` Jisheng Zhang
-1 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/plx_dma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/plx_dma.c b/drivers/dma/plx_dma.c
index 12725fa1655f..34b6416c3287 100644
--- a/drivers/dma/plx_dma.c
+++ b/drivers/dma/plx_dma.c
@@ -517,7 +517,6 @@ static int plx_dma_create(struct pci_dev *pdev)
plxdev->bar = pcim_iomap_table(pdev)[0];
dma = &plxdev->dma_dev;
- dma->chancnt = 1;
INIT_LIST_HEAD(&dma->channels);
dma_cap_set(DMA_MEMCPY, dma->cap_mask);
dma->copy_align = DMAENGINE_ALIGN_1_BYTE;
--
2.39.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/5] dmaengine: plx_dma: Don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/plx_dma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/plx_dma.c b/drivers/dma/plx_dma.c
index 12725fa1655f..34b6416c3287 100644
--- a/drivers/dma/plx_dma.c
+++ b/drivers/dma/plx_dma.c
@@ -517,7 +517,6 @@ static int plx_dma_create(struct pci_dev *pdev)
plxdev->bar = pcim_iomap_table(pdev)[0];
dma = &plxdev->dma_dev;
- dma->chancnt = 1;
INIT_LIST_HEAD(&dma->channels);
dma_cap_set(DMA_MEMCPY, dma->cap_mask);
dma->copy_align = DMAENGINE_ALIGN_1_BYTE;
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 4/5] dmaengine: hidma: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:02 ` Jisheng Zhang
-1 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/qcom/hidma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 04d1c33afc12..344525c3a32f 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -214,7 +214,6 @@ static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
spin_lock_init(&mchan->lock);
list_add_tail(&mchan->chan.device_node, &ddev->channels);
- dmadev->ddev.chancnt++;
return 0;
}
--
2.39.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 4/5] dmaengine: hidma: Don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/qcom/hidma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 04d1c33afc12..344525c3a32f 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -214,7 +214,6 @@ static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
spin_lock_init(&mchan->lock);
list_add_tail(&mchan->chan.device_node, &ddev->channels);
- dmadev->ddev.chancnt++;
return 0;
}
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 5/5] dmaengine: sprd: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:02 ` Jisheng Zhang
-1 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/sprd-dma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 474d3ba8ec9f..2b639adb48ba 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1169,7 +1169,6 @@ static int sprd_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
sdev->total_chns = chn_count;
- sdev->dma_dev.chancnt = chn_count;
INIT_LIST_HEAD(&sdev->dma_dev.channels);
INIT_LIST_HEAD(&sdev->dma_dev.global_node);
sdev->dma_dev.dev = &pdev->dev;
--
2.39.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 5/5] dmaengine: sprd: Don't set chancnt
@ 2023-03-13 17:02 ` Jisheng Zhang
0 siblings, 0 replies; 18+ messages in thread
From: Jisheng Zhang @ 2023-03-13 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
The dma framework will calculate the dma channels chancnt, setting it
outself is wrong.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/dma/sprd-dma.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 474d3ba8ec9f..2b639adb48ba 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1169,7 +1169,6 @@ static int sprd_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
sdev->total_chns = chn_count;
- sdev->dma_dev.chancnt = chn_count;
INIT_LIST_HEAD(&sdev->dma_dev.channels);
INIT_LIST_HEAD(&sdev->dma_dev.global_node);
sdev->dma_dev.dev = &pdev->dev;
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 2/5] dmaengine: axi-dmac: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-13 17:36 ` Lars-Peter Clausen
-1 siblings, 0 replies; 18+ messages in thread
From: Lars-Peter Clausen @ 2023-03-13 17:36 UTC (permalink / raw)
To: Jisheng Zhang, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
On 3/13/23 10:02, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
> outself is wrong.
s/outself/ourself/
Looks good otherwise, thanks.
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
> drivers/dma/dma-axi-dmac.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
> index a812b9b00e6b..fc7cdad37161 100644
> --- a/drivers/dma/dma-axi-dmac.c
> +++ b/drivers/dma/dma-axi-dmac.c
> @@ -963,7 +963,6 @@ static int axi_dmac_probe(struct platform_device *pdev)
> dma_dev->device_terminate_all = axi_dmac_terminate_all;
> dma_dev->device_synchronize = axi_dmac_synchronize;
> dma_dev->dev = &pdev->dev;
> - dma_dev->chancnt = 1;
> dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
> dma_dev->dst_addr_widths = BIT(dmac->chan.dest_width);
> dma_dev->directions = BIT(dmac->chan.direction);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/5] dmaengine: axi-dmac: Don't set chancnt
@ 2023-03-13 17:36 ` Lars-Peter Clausen
0 siblings, 0 replies; 18+ messages in thread
From: Lars-Peter Clausen @ 2023-03-13 17:36 UTC (permalink / raw)
To: Jisheng Zhang, Vinod Koul, Eugeniy Paltsev, Logan Gunthorpe,
Sinan Kaya, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Orson Zhai, Baolin Wang, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
On 3/13/23 10:02, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
> outself is wrong.
s/outself/ourself/
Looks good otherwise, thanks.
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
> drivers/dma/dma-axi-dmac.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
> index a812b9b00e6b..fc7cdad37161 100644
> --- a/drivers/dma/dma-axi-dmac.c
> +++ b/drivers/dma/dma-axi-dmac.c
> @@ -963,7 +963,6 @@ static int axi_dmac_probe(struct platform_device *pdev)
> dma_dev->device_terminate_all = axi_dmac_terminate_all;
> dma_dev->device_synchronize = axi_dmac_synchronize;
> dma_dev->dev = &pdev->dev;
> - dma_dev->chancnt = 1;
> dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
> dma_dev->dst_addr_widths = BIT(dmac->chan.dest_width);
> dma_dev->directions = BIT(dmac->chan.direction);
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 5/5] dmaengine: sprd: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-14 3:51 ` Baolin Wang
-1 siblings, 0 replies; 18+ messages in thread
From: Baolin Wang @ 2023-03-14 3:51 UTC (permalink / raw)
To: Jisheng Zhang, Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev,
Logan Gunthorpe, Sinan Kaya, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Orson Zhai, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
On 3/14/2023 1:02 AM, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
> outself is wrong.
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
LGTM. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> ---
> drivers/dma/sprd-dma.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> index 474d3ba8ec9f..2b639adb48ba 100644
> --- a/drivers/dma/sprd-dma.c
> +++ b/drivers/dma/sprd-dma.c
> @@ -1169,7 +1169,6 @@ static int sprd_dma_probe(struct platform_device *pdev)
>
> dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
> sdev->total_chns = chn_count;
> - sdev->dma_dev.chancnt = chn_count;
> INIT_LIST_HEAD(&sdev->dma_dev.channels);
> INIT_LIST_HEAD(&sdev->dma_dev.global_node);
> sdev->dma_dev.dev = &pdev->dev;
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 5/5] dmaengine: sprd: Don't set chancnt
@ 2023-03-14 3:51 ` Baolin Wang
0 siblings, 0 replies; 18+ messages in thread
From: Baolin Wang @ 2023-03-14 3:51 UTC (permalink / raw)
To: Jisheng Zhang, Lars-Peter Clausen, Vinod Koul, Eugeniy Paltsev,
Logan Gunthorpe, Sinan Kaya, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Orson Zhai, Chunyan Zhang
Cc: dmaengine, linux-kernel, linux-arm-kernel, linux-arm-msm
On 3/14/2023 1:02 AM, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
> outself is wrong.
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
LGTM. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> ---
> drivers/dma/sprd-dma.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> index 474d3ba8ec9f..2b639adb48ba 100644
> --- a/drivers/dma/sprd-dma.c
> +++ b/drivers/dma/sprd-dma.c
> @@ -1169,7 +1169,6 @@ static int sprd_dma_probe(struct platform_device *pdev)
>
> dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
> sdev->total_chns = chn_count;
> - sdev->dma_dev.chancnt = chn_count;
> INIT_LIST_HEAD(&sdev->dma_dev.channels);
> INIT_LIST_HEAD(&sdev->dma_dev.global_node);
> sdev->dma_dev.dev = &pdev->dev;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/5] dmaengine: dw-axi-dmac: Don't set chancnt
2023-03-13 17:02 ` Jisheng Zhang
@ 2023-03-17 17:39 ` Vinod Koul
-1 siblings, 0 replies; 18+ messages in thread
From: Vinod Koul @ 2023-03-17 17:39 UTC (permalink / raw)
To: Jisheng Zhang
Cc: Lars-Peter Clausen, Eugeniy Paltsev, Logan Gunthorpe, Sinan Kaya,
Andy Gross, Bjorn Andersson, Konrad Dybcio, Orson Zhai,
Baolin Wang, Chunyan Zhang, dmaengine, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 14-03-23, 01:02, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
The dmaengine framework...
> outself is wrong.
s/outself/ourself
Looks this this is needed for all the patches
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
> drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> index 4169e1d7d5ca..7f3a60e28e38 100644
> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> @@ -1445,7 +1445,6 @@ static int dw_probe(struct platform_device *pdev)
> dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
>
> /* DMA capabilities */
> - dw->dma.chancnt = hdata->nr_channels;
> dw->dma.max_burst = hdata->axi_rw_burst_len;
> dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
> dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
> --
> 2.39.2
--
~Vinod
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/5] dmaengine: dw-axi-dmac: Don't set chancnt
@ 2023-03-17 17:39 ` Vinod Koul
0 siblings, 0 replies; 18+ messages in thread
From: Vinod Koul @ 2023-03-17 17:39 UTC (permalink / raw)
To: Jisheng Zhang
Cc: Lars-Peter Clausen, Eugeniy Paltsev, Logan Gunthorpe, Sinan Kaya,
Andy Gross, Bjorn Andersson, Konrad Dybcio, Orson Zhai,
Baolin Wang, Chunyan Zhang, dmaengine, linux-kernel,
linux-arm-kernel, linux-arm-msm
On 14-03-23, 01:02, Jisheng Zhang wrote:
> The dma framework will calculate the dma channels chancnt, setting it
The dmaengine framework...
> outself is wrong.
s/outself/ourself
Looks this this is needed for all the patches
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
> drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> index 4169e1d7d5ca..7f3a60e28e38 100644
> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> @@ -1445,7 +1445,6 @@ static int dw_probe(struct platform_device *pdev)
> dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
>
> /* DMA capabilities */
> - dw->dma.chancnt = hdata->nr_channels;
> dw->dma.max_burst = hdata->axi_rw_burst_len;
> dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
> dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
> --
> 2.39.2
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2023-03-17 17:40 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-13 17:02 [PATCH 0/5] dma: don't set chancnt Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-13 17:02 ` [PATCH 1/5] dmaengine: dw-axi-dmac: Don't " Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-17 17:39 ` Vinod Koul
2023-03-17 17:39 ` Vinod Koul
2023-03-13 17:02 ` [PATCH 2/5] dmaengine: axi-dmac: " Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-13 17:36 ` Lars-Peter Clausen
2023-03-13 17:36 ` Lars-Peter Clausen
2023-03-13 17:02 ` [PATCH 3/5] dmaengine: plx_dma: " Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-13 17:02 ` [PATCH 4/5] dmaengine: hidma: " Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-13 17:02 ` [PATCH 5/5] dmaengine: sprd: " Jisheng Zhang
2023-03-13 17:02 ` Jisheng Zhang
2023-03-14 3:51 ` Baolin Wang
2023-03-14 3:51 ` Baolin Wang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.