Re: [PATCH v3 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ

[Cyrille Pitchen <cyrille.pitchen@atmel.com>]

Le 18/08/2016 à 09:37, Yunhui Cui a écrit :
> There are some read modes for flash, such as NORMAL, FAST,
> QUAD, DDR QUAD. These modes will use the identical lut table base
> So rename SEQID_QUAD_READ to SEQID_READ.
> 
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>

Applied to the spi-nor tree.

Thanks!
> ---
>  drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 5ad6402..21c77e8 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -193,7 +193,7 @@
>  #define QUADSPI_LUT_NUM		64
>  
>  /* SEQID -- we can have 16 seqids at most. */
> -#define SEQID_QUAD_READ		0
> +#define SEQID_READ		0
>  #define SEQID_WREN		1
>  #define SEQID_WRDI		2
>  #define SEQID_RDSR		3
> @@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>  	for (i = 0; i < QUADSPI_LUT_NUM; i++)
>  		qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
>  
> -	/* Quad Read */
> -	lut_base = SEQID_QUAD_READ * 4;
> +	/* Read */
> +	lut_base = SEQID_READ * 4;
>  
>  	qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
>  			base + QUADSPI_LUT(lut_base));
> @@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>  {
>  	switch (cmd) {
>  	case SPINOR_OP_READ_1_1_4:
> -		return SEQID_QUAD_READ;
> +		return SEQID_READ;
>  	case SPINOR_OP_WREN:
>  		return SEQID_WREN;
>  	case SPINOR_OP_WRDI:
>