* [PATCH V2 0/8] Add minimal boot support for IPQ5018
@ 2022-06-21 16:11 ` Sricharan R
0 siblings, 0 replies; 65+ messages in thread
From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw)
To: quic_srichara, agross, bjorn.andersson, robh+dt,
krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij,
catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree,
linux-kernel, linux-clk, linux-gpio, linux-arm-kernel
The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq5018-mp03.1-c2 board.
[v2]
Fixed all comments and rebased for TOT.
Varadarajan Narayanan (8):
clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
dt-bindings: arm64: ipq5018: Add binding descriptions for clock and
reset
clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings
pinctrl: qcom: Add IPQ5018 pinctrl driver
dt-bindings: qcom: Add ipq5018 bindings
arm64: dts: Add ipq5018 SoC and MP03 board support
arm64: defconfig: Enable IPQ5018 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/clock/qcom,gcc-other.yaml | 3 +
.../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 +
arch/arm64/configs/defconfig | 3 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 100 +-
drivers/clk/qcom/clk-alpha-pll.h | 7 +-
drivers/clk/qcom/gcc-ipq5018.c | 3995 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 ++++
include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 +
include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 +
17 files changed, 5629 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 65+ messages in thread* [PATCH V2 0/8] Add minimal boot support for IPQ5018 @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, Gateways and Access Points. This series adds minimal board boot support for ipq5018-mp03.1-c2 board. [v2] Fixed all comments and rebased for TOT. Varadarajan Narayanan (8): clk: qcom: clk-alpha-pll: Add support for Stromer PLLs dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings pinctrl: qcom: Add IPQ5018 pinctrl driver dt-bindings: qcom: Add ipq5018 bindings arm64: dts: Add ipq5018 SoC and MP03 board support arm64: defconfig: Enable IPQ5018 SoC base configs .../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/clock/qcom,gcc-other.yaml | 3 + .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 + arch/arm64/configs/defconfig | 3 + drivers/clk/qcom/Kconfig | 7 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-alpha-pll.c | 100 +- drivers/clk/qcom/clk-alpha-pll.h | 7 +- drivers/clk/qcom/gcc-ipq5018.c | 3995 +++++++++++++++++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 ++++ include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 + include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 + 17 files changed, 5629 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi create mode 100644 drivers/clk/qcom/gcc-ipq5018.c create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 1/8] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add programming sequence support for managing the Stromer PLLs. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/clk/qcom/clk-alpha-pll.c | 100 ++++++++++++++++++++++++++++++- drivers/clk/qcom/clk-alpha-pll.h | 7 ++- 2 files changed, 105 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 4406cf609aae..08f11e32a57d 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -154,9 +154,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = { [PLL_OFF_TEST_CTL_U] = 0x30, [PLL_OFF_TEST_CTL_U1] = 0x34, }, + [CLK_ALPHA_PLL_TYPE_STROMER] = { + [PLL_OFF_L_VAL] = 0x08, + [PLL_OFF_ALPHA_VAL] = 0x10, + [PLL_OFF_ALPHA_VAL_U] = 0x14, + [PLL_OFF_USER_CTL] = 0x18, + [PLL_OFF_USER_CTL_U] = 0x1c, + [PLL_OFF_CONFIG_CTL] = 0x20, + [PLL_OFF_CONFIG_CTL_U] = 0xff, + [PLL_OFF_TEST_CTL] = 0x30, + [PLL_OFF_TEST_CTL_U] = 0x34, + [PLL_OFF_STATUS] = 0x28, + }, }; EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); +static unsigned long +alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a, + u32 alpha_width); /* * Even though 40 bits are present, use only 32 for ease of calculation. */ @@ -165,6 +180,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); #define ALPHA_BITWIDTH 32U #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH) +#define ALPHA_PLL_STATUS_REG_SHIFT 8 + #define PLL_HUAYRA_M_WIDTH 8 #define PLL_HUAYRA_M_SHIFT 8 #define PLL_HUAYRA_M_MASK 0xff @@ -273,7 +290,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg, void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config) { - u32 val, mask; + u32 val, val_u, mask, mask_u; regmap_write(regmap, PLL_L_VAL(pll), config->l); regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha); @@ -303,14 +320,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, mask |= config->pre_div_mask; mask |= config->post_div_mask; mask |= config->vco_mask; + mask |= config->alpha_en_mask; + mask |= config->alpha_mode_mask; regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val); + /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */ + val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT; + val_u |= config->lock_det; + + mask_u = config->status_reg_mask; + mask_u |= config->lock_det; + + if (val_u) + regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u); + + if (config->test_ctl_val) + regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val); + + if (config->test_ctl_hi_val) + regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val); + if (pll->flags & SUPPORTS_FSM_MODE) qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0); } EXPORT_SYMBOL_GPL(clk_alpha_pll_configure); +static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + u32 l; + u64 a; + + req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate, + &l, &a, ALPHA_REG_BITWIDTH); + + return 0; +} + +static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 l; + int ret; + u64 a; + + rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH); + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), + a >> ALPHA_BITWIDTH); + + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + PLL_ALPHA_EN, PLL_ALPHA_EN); + + if (!clk_hw_is_enabled(hw)) + return 0; + + /* + * Stromer PLL supports Dynamic programming. + * It allows the PLL frequency to be changed on-the-fly without first + * execution of a shutdown procedure followed by a bring up procedure. + */ + + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE, + PLL_UPDATE); + + ret = wait_for_pll_update(pll); + if (ret) + return ret; + + ret = wait_for_pll_enable_lock(pll); + if (ret) + return ret; + + return 0; +} + static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw) { int ret; @@ -961,6 +1049,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = { }; EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops); +const struct clk_ops clk_alpha_pll_stromer_ops = { + .enable = clk_alpha_pll_enable, + .disable = clk_alpha_pll_disable, + .is_enabled = clk_alpha_pll_is_enabled, + .recalc_rate = clk_alpha_pll_recalc_rate, + .determine_rate = clk_alpha_pll_stromer_determine_rate, + .set_rate = clk_alpha_pll_stromer_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops); + const struct clk_ops clk_alpha_pll_fixed_trion_ops = { .enable = clk_trion_pll_enable, .disable = clk_trion_pll_disable, diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index 6e9907deaf30..272a276a266d 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */ #ifndef __QCOM_CLK_ALPHA_PLL_H__ #define __QCOM_CLK_ALPHA_PLL_H__ @@ -18,6 +18,7 @@ enum { CLK_ALPHA_PLL_TYPE_AGERA, CLK_ALPHA_PLL_TYPE_ZONDA, CLK_ALPHA_PLL_TYPE_LUCID_EVO, + CLK_ALPHA_PLL_TYPE_STROMER, CLK_ALPHA_PLL_TYPE_MAX, }; @@ -124,6 +125,9 @@ struct alpha_pll_config { u32 post_div_mask; u32 vco_val; u32 vco_mask; + u32 status_reg_val; + u32 status_reg_mask; + u32 lock_det; }; extern const struct clk_ops clk_alpha_pll_ops; @@ -132,6 +136,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops; extern const struct clk_ops clk_alpha_pll_postdiv_ops; extern const struct clk_ops clk_alpha_pll_huayra_ops; extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops; +extern const struct clk_ops clk_alpha_pll_stromer_ops; extern const struct clk_ops clk_alpha_pll_fabia_ops; extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 1/8] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add programming sequence support for managing the Stromer PLLs. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/clk/qcom/clk-alpha-pll.c | 100 ++++++++++++++++++++++++++++++- drivers/clk/qcom/clk-alpha-pll.h | 7 ++- 2 files changed, 105 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 4406cf609aae..08f11e32a57d 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -154,9 +154,24 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = { [PLL_OFF_TEST_CTL_U] = 0x30, [PLL_OFF_TEST_CTL_U1] = 0x34, }, + [CLK_ALPHA_PLL_TYPE_STROMER] = { + [PLL_OFF_L_VAL] = 0x08, + [PLL_OFF_ALPHA_VAL] = 0x10, + [PLL_OFF_ALPHA_VAL_U] = 0x14, + [PLL_OFF_USER_CTL] = 0x18, + [PLL_OFF_USER_CTL_U] = 0x1c, + [PLL_OFF_CONFIG_CTL] = 0x20, + [PLL_OFF_CONFIG_CTL_U] = 0xff, + [PLL_OFF_TEST_CTL] = 0x30, + [PLL_OFF_TEST_CTL_U] = 0x34, + [PLL_OFF_STATUS] = 0x28, + }, }; EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); +static unsigned long +alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a, + u32 alpha_width); /* * Even though 40 bits are present, use only 32 for ease of calculation. */ @@ -165,6 +180,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); #define ALPHA_BITWIDTH 32U #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH) +#define ALPHA_PLL_STATUS_REG_SHIFT 8 + #define PLL_HUAYRA_M_WIDTH 8 #define PLL_HUAYRA_M_SHIFT 8 #define PLL_HUAYRA_M_MASK 0xff @@ -273,7 +290,7 @@ static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg, void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config) { - u32 val, mask; + u32 val, val_u, mask, mask_u; regmap_write(regmap, PLL_L_VAL(pll), config->l); regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha); @@ -303,14 +320,85 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, mask |= config->pre_div_mask; mask |= config->post_div_mask; mask |= config->vco_mask; + mask |= config->alpha_en_mask; + mask |= config->alpha_mode_mask; regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val); + /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */ + val_u = config->status_reg_val << ALPHA_PLL_STATUS_REG_SHIFT; + val_u |= config->lock_det; + + mask_u = config->status_reg_mask; + mask_u |= config->lock_det; + + if (val_u) + regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u); + + if (config->test_ctl_val) + regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val); + + if (config->test_ctl_hi_val) + regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val); + if (pll->flags & SUPPORTS_FSM_MODE) qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0); } EXPORT_SYMBOL_GPL(clk_alpha_pll_configure); +static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + u32 l; + u64 a; + + req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate, + &l, &a, ALPHA_REG_BITWIDTH); + + return 0; +} + +static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 l; + int ret; + u64 a; + + rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH); + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll), + a >> ALPHA_BITWIDTH); + + regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + PLL_ALPHA_EN, PLL_ALPHA_EN); + + if (!clk_hw_is_enabled(hw)) + return 0; + + /* + * Stromer PLL supports Dynamic programming. + * It allows the PLL frequency to be changed on-the-fly without first + * execution of a shutdown procedure followed by a bring up procedure. + */ + + regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE, + PLL_UPDATE); + + ret = wait_for_pll_update(pll); + if (ret) + return ret; + + ret = wait_for_pll_enable_lock(pll); + if (ret) + return ret; + + return 0; +} + static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw) { int ret; @@ -961,6 +1049,16 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = { }; EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops); +const struct clk_ops clk_alpha_pll_stromer_ops = { + .enable = clk_alpha_pll_enable, + .disable = clk_alpha_pll_disable, + .is_enabled = clk_alpha_pll_is_enabled, + .recalc_rate = clk_alpha_pll_recalc_rate, + .determine_rate = clk_alpha_pll_stromer_determine_rate, + .set_rate = clk_alpha_pll_stromer_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops); + const struct clk_ops clk_alpha_pll_fixed_trion_ops = { .enable = clk_trion_pll_enable, .disable = clk_trion_pll_disable, diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index 6e9907deaf30..272a276a266d 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved. */ #ifndef __QCOM_CLK_ALPHA_PLL_H__ #define __QCOM_CLK_ALPHA_PLL_H__ @@ -18,6 +18,7 @@ enum { CLK_ALPHA_PLL_TYPE_AGERA, CLK_ALPHA_PLL_TYPE_ZONDA, CLK_ALPHA_PLL_TYPE_LUCID_EVO, + CLK_ALPHA_PLL_TYPE_STROMER, CLK_ALPHA_PLL_TYPE_MAX, }; @@ -124,6 +125,9 @@ struct alpha_pll_config { u32 post_div_mask; u32 vco_val; u32 vco_mask; + u32 status_reg_val; + u32 status_reg_mask; + u32 lock_det; }; extern const struct clk_ops clk_alpha_pll_ops; @@ -132,6 +136,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops; extern const struct clk_ops clk_alpha_pll_postdiv_ops; extern const struct clk_ops clk_alpha_pll_huayra_ops; extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops; +extern const struct clk_ops clk_alpha_pll_stromer_ops; extern const struct clk_ops clk_alpha_pll_fabia_ops; extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> This patch adds support for the global clock controller found on the IPQ5018 based devices. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- .../bindings/clock/qcom,gcc-other.yaml | 3 + include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ 3 files changed, 313 insertions(+) create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml index 6c45e0f85494..3852346dbcad 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -29,6 +29,8 @@ description: | - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) + - dt-bindings/clock/qcom,gcc-ipq5018.h + - dt-bindings/reset/qcom,gcc-ipq5018.h allOf: - $ref: "qcom,gcc.yaml#" @@ -51,6 +53,7 @@ properties: - qcom,gcc-mdm9615 - qcom,gcc-sdm630 - qcom,gcc-sdm660 + - qcom,gcc-ipq5018 required: - compatible diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h new file mode 100644 index 000000000000..14916600e2a7 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H + +#define GPLL0_MAIN 0 +#define GPLL0 1 +#define GPLL2_MAIN 2 +#define GPLL2 3 +#define GPLL4_MAIN 4 +#define GPLL4 5 +#define UBI32_PLL_MAIN 6 +#define UBI32_PLL 7 +#define APSS_AHB_CLK_SRC 9 +#define APSS_AHB_POSTDIV_CLK_SRC 10 +#define APSS_AXI_CLK_SRC 11 +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 +#define BLSP1_UART1_APPS_CLK_SRC 18 +#define BLSP1_UART2_APPS_CLK_SRC 19 +#define CRYPTO_CLK_SRC 20 +#define GCC_APSS_AHB_CLK 23 +#define GCC_APSS_AXI_CLK 24 +#define GCC_BLSP1_AHB_CLK 25 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 +#define GCC_BLSP1_UART1_APPS_CLK 33 +#define GCC_BLSP1_UART2_APPS_CLK 34 +#define GCC_BTSS_LPO_CLK 36 +#define GCC_CMN_BLK_AHB_CLK 40 +#define GCC_CMN_BLK_SYS_CLK 41 +#define GCC_CRYPTO_AHB_CLK 44 +#define GCC_CRYPTO_AXI_CLK 45 +#define GCC_CRYPTO_CLK 46 +#define GCC_CRYPTO_PPE_CLK 47 +#define GCC_DCC_CLK 48 +#define GCC_GEPHY_RX_CLK 53 +#define GCC_GEPHY_TX_CLK 54 +#define GCC_GMAC0_CFG_CLK 55 +#define GCC_GMAC0_PTP_CLK 56 +#define GCC_GMAC0_RX_CLK 57 +#define GCC_GMAC0_SYS_CLK 58 +#define GCC_GMAC0_TX_CLK 59 +#define GCC_GMAC1_CFG_CLK 60 +#define GCC_GMAC1_PTP_CLK 61 +#define GCC_GMAC1_RX_CLK 62 +#define GCC_GMAC1_SYS_CLK 63 +#define GCC_GMAC1_TX_CLK 64 +#define GCC_GP1_CLK 65 +#define GCC_GP2_CLK 66 +#define GCC_GP3_CLK 67 +#define GCC_LPASS_CORE_AXIM_CLK 69 +#define GCC_LPASS_SWAY_CLK 70 +#define GCC_MDIO0_AHB_CLK 71 +#define GCC_MDIO1_AHB_CLK 72 +#define GCC_PCIE0_AHB_CLK 74 +#define GCC_PCIE0_AUX_CLK 75 +#define GCC_PCIE0_AXI_M_CLK 76 +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 +#define GCC_PCIE0_AXI_S_CLK 78 +#define GCC_PCIE1_AHB_CLK 79 +#define GCC_PCIE1_AUX_CLK 80 +#define GCC_PCIE1_AXI_M_CLK 81 +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 +#define GCC_PCIE1_AXI_S_CLK 83 +#define GCC_PRNG_AHB_CLK 84 +#define GCC_Q6_AXIM_CLK 85 +#define GCC_Q6_AXIM2_CLK 86 +#define GCC_Q6_AXIS_CLK 87 +#define GCC_Q6_AHB_CLK 88 +#define GCC_Q6_AHB_S_CLK 89 +#define GCC_Q6_TSCTR_1TO2_CLK 90 +#define GCC_Q6SS_ATBM_CLK 91 +#define GCC_Q6SS_PCLKDBG_CLK 92 +#define GCC_Q6SS_TRIG_CLK 93 +#define GCC_QDSS_AT_CLK 94 +#define GCC_QDSS_CFG_AHB_CLK 95 +#define GCC_QDSS_DAP_AHB_CLK 96 +#define GCC_QDSS_DAP_CLK 97 +#define GCC_QDSS_ETR_USB_CLK 98 +#define GCC_QDSS_EUD_AT_CLK 99 +#define GCC_QDSS_STM_CLK 100 +#define GCC_QDSS_TRACECLKIN_CLK 101 +#define GCC_QDSS_TSCTR_DIV8_CLK 102 +#define GCC_QPIC_AHB_CLK 103 +#define GCC_QPIC_CLK 104 +#define GCC_QPIC_IO_MACRO_CLK 105 +#define GCC_SDCC1_AHB_CLK 107 +#define GCC_SDCC1_APPS_CLK 108 +#define GCC_SLEEP_CLK_SRC 109 +#define GCC_SNOC_GMAC0_AHB_CLK 110 +#define GCC_SNOC_GMAC0_AXI_CLK 111 +#define GCC_SNOC_GMAC1_AHB_CLK 112 +#define GCC_SNOC_GMAC1_AXI_CLK 113 +#define GCC_SNOC_LPASS_AXIM_CLK 114 +#define GCC_SNOC_LPASS_SWAY_CLK 115 +#define GCC_SNOC_UBI0_AXI_CLK 118 +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 +#define GCC_SYS_NOC_USB0_AXI_CLK 123 +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 +#define GCC_UBI0_AXI_CLK 128 +#define GCC_UBI0_CFG_CLK 129 +#define GCC_UBI0_CORE_CLK 130 +#define GCC_UBI0_DBG_CLK 131 +#define GCC_UBI0_NC_AXI_CLK 132 +#define GCC_UBI0_UTCM_CLK 133 +#define GCC_UNIPHY_AHB_CLK 134 +#define GCC_UNIPHY_RX_CLK 135 +#define GCC_UNIPHY_SYS_CLK 136 +#define GCC_UNIPHY_TX_CLK 137 +#define GCC_USB0_AUX_CLK 138 +#define GCC_USB0_EUD_AT_CLK 139 +#define GCC_USB0_LFPS_CLK 140 +#define GCC_USB0_MASTER_CLK 141 +#define GCC_USB0_MOCK_UTMI_CLK 142 +#define GCC_USB0_PHY_CFG_AHB_CLK 143 +#define GCC_USB0_SLEEP_CLK 144 +#define GCC_WCSS_ACMT_CLK 145 +#define GCC_WCSS_AHB_S_CLK 146 +#define GCC_WCSS_AXI_M_CLK 147 +#define GCC_WCSS_AXI_S_CLK 148 +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 +#define GCC_WCSS_DBG_IFC_APB_CLK 150 +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 +#define GCC_WCSS_ECAHB_CLK 157 +#define GCC_XO_CLK 158 +#define GCC_XO_CLK_SRC 159 +#define GMAC0_RX_CLK_SRC 161 +#define GMAC0_TX_CLK_SRC 162 +#define GMAC1_RX_CLK_SRC 163 +#define GMAC1_TX_CLK_SRC 164 +#define GMAC_CLK_SRC 165 +#define GP1_CLK_SRC 166 +#define GP2_CLK_SRC 167 +#define GP3_CLK_SRC 168 +#define LPASS_AXIM_CLK_SRC 169 +#define LPASS_SWAY_CLK_SRC 170 +#define PCIE0_AUX_CLK_SRC 171 +#define PCIE0_AXI_CLK_SRC 172 +#define PCIE1_AUX_CLK_SRC 173 +#define PCIE1_AXI_CLK_SRC 174 +#define PCNOC_BFDCD_CLK_SRC 175 +#define Q6_AXI_CLK_SRC 176 +#define QDSS_AT_CLK_SRC 177 +#define QDSS_STM_CLK_SRC 178 +#define QDSS_TSCTR_CLK_SRC 179 +#define QDSS_TRACECLKIN_CLK_SRC 180 +#define QPIC_IO_MACRO_CLK_SRC 181 +#define SDCC1_APPS_CLK_SRC 182 +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 +#define UBI0_AXI_CLK_SRC 185 +#define UBI0_CORE_CLK_SRC 186 +#define USB0_AUX_CLK_SRC 187 +#define USB0_LFPS_CLK_SRC 188 +#define USB0_MASTER_CLK_SRC 189 +#define USB0_MOCK_UTMI_CLK_SRC 190 +#define WCSS_AHB_CLK_SRC 191 +#define PCIE0_PIPE_CLK_SRC 192 +#define PCIE1_PIPE_CLK_SRC 193 +#define GCC_PCIE0_PIPE_CLK 194 +#define GCC_PCIE1_PIPE_CLK 195 +#define USB0_PIPE_CLK_SRC 196 +#define GCC_USB0_PIPE_CLK 197 +#define GMAC0_RX_DIV_CLK_SRC 198 +#define GMAC0_TX_DIV_CLK_SRC 199 +#define GMAC1_RX_DIV_CLK_SRC 200 +#define GMAC1_TX_DIV_CLK_SRC 201 +#define ADSS_PWM_CLK_SRC 202 +#define GCC_ADSS_PWM_CLK 203 +#endif diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h new file mode 100644 index 000000000000..bdbc974cb6ea --- /dev/null +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H + +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 +#define GCC_BLSP1_BCR 1 +#define GCC_BLSP1_QUP1_BCR 2 +#define GCC_BLSP1_QUP2_BCR 3 +#define GCC_BLSP1_QUP3_BCR 4 +#define GCC_BLSP1_UART1_BCR 5 +#define GCC_BLSP1_UART2_BCR 6 +#define GCC_BOOT_ROM_BCR 7 +#define GCC_BTSS_BCR 8 +#define GCC_CMN_BLK_BCR 9 +#define GCC_CMN_LDO_BCR 10 +#define GCC_CE_BCR 11 +#define GCC_CRYPTO_BCR 12 +#define GCC_DCC_BCR 13 +#define GCC_DCD_BCR 14 +#define GCC_DDRSS_BCR 15 +#define GCC_EDPD_BCR 16 +#define GCC_GEPHY_BCR 17 +#define GCC_GEPHY_MDC_SW_ARES 18 +#define GCC_GEPHY_DSP_HW_ARES 19 +#define GCC_GEPHY_RX_ARES 20 +#define GCC_GEPHY_TX_ARES 21 +#define GCC_GMAC0_BCR 22 +#define GCC_GMAC0_CFG_ARES 23 +#define GCC_GMAC0_SYS_ARES 24 +#define GCC_GMAC1_BCR 25 +#define GCC_GMAC1_CFG_ARES 26 +#define GCC_GMAC1_SYS_ARES 27 +#define GCC_IMEM_BCR 28 +#define GCC_LPASS_BCR 29 +#define GCC_MDIO0_BCR 30 +#define GCC_MDIO1_BCR 31 +#define GCC_MPM_BCR 32 +#define GCC_PCIE0_BCR 33 +#define GCC_PCIE0_LINK_DOWN_BCR 34 +#define GCC_PCIE0_PHY_BCR 35 +#define GCC_PCIE0PHY_PHY_BCR 36 +#define GCC_PCIE0_PIPE_ARES 37 +#define GCC_PCIE0_SLEEP_ARES 38 +#define GCC_PCIE0_CORE_STICKY_ARES 39 +#define GCC_PCIE0_AXI_MASTER_ARES 40 +#define GCC_PCIE0_AXI_SLAVE_ARES 41 +#define GCC_PCIE0_AHB_ARES 42 +#define GCC_PCIE0_AXI_MASTER_STICKY_ARES 43 +#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 44 +#define GCC_PCIE1_BCR 45 +#define GCC_PCIE1_LINK_DOWN_BCR 46 +#define GCC_PCIE1_PHY_BCR 47 +#define GCC_PCIE1PHY_PHY_BCR 48 +#define GCC_PCIE1_PIPE_ARES 49 +#define GCC_PCIE1_SLEEP_ARES 50 +#define GCC_PCIE1_CORE_STICKY_ARES 51 +#define GCC_PCIE1_AXI_MASTER_ARES 52 +#define GCC_PCIE1_AXI_SLAVE_ARES 53 +#define GCC_PCIE1_AHB_ARES 54 +#define GCC_PCIE1_AXI_MASTER_STICKY_ARES 55 +#define GCC_PCIE1_AXI_SLAVE_STICKY_ARES 56 +#define GCC_PCNOC_BCR 57 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 58 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 59 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 60 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 61 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 62 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 63 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 64 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 65 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 66 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 67 +#define GCC_PCNOC_BUS_TIMEOUT10_BCR 68 +#define GCC_PCNOC_BUS_TIMEOUT11_BCR 69 +#define GCC_PRNG_BCR 70 +#define GCC_Q6SS_DBG_ARES 71 +#define GCC_Q6_AHB_S_ARES 72 +#define GCC_Q6_AHB_ARES 73 +#define GCC_Q6_AXIM2_ARES 74 +#define GCC_Q6_AXIM_ARES 75 +#define GCC_Q6_AXIS_ARES 76 +#define GCC_QDSS_BCR 77 +#define GCC_QPIC_BCR 78 +#define GCC_QUSB2_0_PHY_BCR 79 +#define GCC_SDCC1_BCR 80 +#define GCC_SEC_CTRL_BCR 81 +#define GCC_SPDM_BCR 82 +#define GCC_SYSTEM_NOC_BCR 83 +#define GCC_TCSR_BCR 84 +#define GCC_TLMM_BCR 85 +#define GCC_UBI0_AXI_ARES 86 +#define GCC_UBI0_AHB_ARES 87 +#define GCC_UBI0_NC_AXI_ARES 88 +#define GCC_UBI0_DBG_ARES 89 +#define GCC_UBI0_UTCM_ARES 90 +#define GCC_UBI0_CORE_ARES 91 +#define GCC_UBI32_BCR 92 +#define GCC_UNIPHY_BCR 93 +#define GCC_UNIPHY_AHB_ARES 94 +#define GCC_UNIPHY_SYS_ARES 95 +#define GCC_UNIPHY_RX_ARES 96 +#define GCC_UNIPHY_TX_ARES 97 +#define GCC_USB0_BCR 98 +#define GCC_USB0_PHY_BCR 99 +#define GCC_WCSS_BCR 100 +#define GCC_WCSS_DBG_ARES 101 +#define GCC_WCSS_ECAHB_ARES 102 +#define GCC_WCSS_ACMT_ARES 103 +#define GCC_WCSS_DBG_BDG_ARES 104 +#define GCC_WCSS_AHB_S_ARES 105 +#define GCC_WCSS_AXI_M_ARES 106 +#define GCC_WCSS_AXI_S_ARES 107 +#define GCC_WCSS_Q6_BCR 108 +#define GCC_WCSSAON_RESET 109 +#define GCC_UNIPHY_SOFT_RESET 110 +#define GCC_GEPHY_MISC_ARES 111 + +#endif -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> This patch adds support for the global clock controller found on the IPQ5018 based devices. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- .../bindings/clock/qcom,gcc-other.yaml | 3 + include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ 3 files changed, 313 insertions(+) create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml index 6c45e0f85494..3852346dbcad 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -29,6 +29,8 @@ description: | - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) + - dt-bindings/clock/qcom,gcc-ipq5018.h + - dt-bindings/reset/qcom,gcc-ipq5018.h allOf: - $ref: "qcom,gcc.yaml#" @@ -51,6 +53,7 @@ properties: - qcom,gcc-mdm9615 - qcom,gcc-sdm630 - qcom,gcc-sdm660 + - qcom,gcc-ipq5018 required: - compatible diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h new file mode 100644 index 000000000000..14916600e2a7 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H + +#define GPLL0_MAIN 0 +#define GPLL0 1 +#define GPLL2_MAIN 2 +#define GPLL2 3 +#define GPLL4_MAIN 4 +#define GPLL4 5 +#define UBI32_PLL_MAIN 6 +#define UBI32_PLL 7 +#define APSS_AHB_CLK_SRC 9 +#define APSS_AHB_POSTDIV_CLK_SRC 10 +#define APSS_AXI_CLK_SRC 11 +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 +#define BLSP1_UART1_APPS_CLK_SRC 18 +#define BLSP1_UART2_APPS_CLK_SRC 19 +#define CRYPTO_CLK_SRC 20 +#define GCC_APSS_AHB_CLK 23 +#define GCC_APSS_AXI_CLK 24 +#define GCC_BLSP1_AHB_CLK 25 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 +#define GCC_BLSP1_UART1_APPS_CLK 33 +#define GCC_BLSP1_UART2_APPS_CLK 34 +#define GCC_BTSS_LPO_CLK 36 +#define GCC_CMN_BLK_AHB_CLK 40 +#define GCC_CMN_BLK_SYS_CLK 41 +#define GCC_CRYPTO_AHB_CLK 44 +#define GCC_CRYPTO_AXI_CLK 45 +#define GCC_CRYPTO_CLK 46 +#define GCC_CRYPTO_PPE_CLK 47 +#define GCC_DCC_CLK 48 +#define GCC_GEPHY_RX_CLK 53 +#define GCC_GEPHY_TX_CLK 54 +#define GCC_GMAC0_CFG_CLK 55 +#define GCC_GMAC0_PTP_CLK 56 +#define GCC_GMAC0_RX_CLK 57 +#define GCC_GMAC0_SYS_CLK 58 +#define GCC_GMAC0_TX_CLK 59 +#define GCC_GMAC1_CFG_CLK 60 +#define GCC_GMAC1_PTP_CLK 61 +#define GCC_GMAC1_RX_CLK 62 +#define GCC_GMAC1_SYS_CLK 63 +#define GCC_GMAC1_TX_CLK 64 +#define GCC_GP1_CLK 65 +#define GCC_GP2_CLK 66 +#define GCC_GP3_CLK 67 +#define GCC_LPASS_CORE_AXIM_CLK 69 +#define GCC_LPASS_SWAY_CLK 70 +#define GCC_MDIO0_AHB_CLK 71 +#define GCC_MDIO1_AHB_CLK 72 +#define GCC_PCIE0_AHB_CLK 74 +#define GCC_PCIE0_AUX_CLK 75 +#define GCC_PCIE0_AXI_M_CLK 76 +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 +#define GCC_PCIE0_AXI_S_CLK 78 +#define GCC_PCIE1_AHB_CLK 79 +#define GCC_PCIE1_AUX_CLK 80 +#define GCC_PCIE1_AXI_M_CLK 81 +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 +#define GCC_PCIE1_AXI_S_CLK 83 +#define GCC_PRNG_AHB_CLK 84 +#define GCC_Q6_AXIM_CLK 85 +#define GCC_Q6_AXIM2_CLK 86 +#define GCC_Q6_AXIS_CLK 87 +#define GCC_Q6_AHB_CLK 88 +#define GCC_Q6_AHB_S_CLK 89 +#define GCC_Q6_TSCTR_1TO2_CLK 90 +#define GCC_Q6SS_ATBM_CLK 91 +#define GCC_Q6SS_PCLKDBG_CLK 92 +#define GCC_Q6SS_TRIG_CLK 93 +#define GCC_QDSS_AT_CLK 94 +#define GCC_QDSS_CFG_AHB_CLK 95 +#define GCC_QDSS_DAP_AHB_CLK 96 +#define GCC_QDSS_DAP_CLK 97 +#define GCC_QDSS_ETR_USB_CLK 98 +#define GCC_QDSS_EUD_AT_CLK 99 +#define GCC_QDSS_STM_CLK 100 +#define GCC_QDSS_TRACECLKIN_CLK 101 +#define GCC_QDSS_TSCTR_DIV8_CLK 102 +#define GCC_QPIC_AHB_CLK 103 +#define GCC_QPIC_CLK 104 +#define GCC_QPIC_IO_MACRO_CLK 105 +#define GCC_SDCC1_AHB_CLK 107 +#define GCC_SDCC1_APPS_CLK 108 +#define GCC_SLEEP_CLK_SRC 109 +#define GCC_SNOC_GMAC0_AHB_CLK 110 +#define GCC_SNOC_GMAC0_AXI_CLK 111 +#define GCC_SNOC_GMAC1_AHB_CLK 112 +#define GCC_SNOC_GMAC1_AXI_CLK 113 +#define GCC_SNOC_LPASS_AXIM_CLK 114 +#define GCC_SNOC_LPASS_SWAY_CLK 115 +#define GCC_SNOC_UBI0_AXI_CLK 118 +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 +#define GCC_SYS_NOC_USB0_AXI_CLK 123 +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 +#define GCC_UBI0_AXI_CLK 128 +#define GCC_UBI0_CFG_CLK 129 +#define GCC_UBI0_CORE_CLK 130 +#define GCC_UBI0_DBG_CLK 131 +#define GCC_UBI0_NC_AXI_CLK 132 +#define GCC_UBI0_UTCM_CLK 133 +#define GCC_UNIPHY_AHB_CLK 134 +#define GCC_UNIPHY_RX_CLK 135 +#define GCC_UNIPHY_SYS_CLK 136 +#define GCC_UNIPHY_TX_CLK 137 +#define GCC_USB0_AUX_CLK 138 +#define GCC_USB0_EUD_AT_CLK 139 +#define GCC_USB0_LFPS_CLK 140 +#define GCC_USB0_MASTER_CLK 141 +#define GCC_USB0_MOCK_UTMI_CLK 142 +#define GCC_USB0_PHY_CFG_AHB_CLK 143 +#define GCC_USB0_SLEEP_CLK 144 +#define GCC_WCSS_ACMT_CLK 145 +#define GCC_WCSS_AHB_S_CLK 146 +#define GCC_WCSS_AXI_M_CLK 147 +#define GCC_WCSS_AXI_S_CLK 148 +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 +#define GCC_WCSS_DBG_IFC_APB_CLK 150 +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 +#define GCC_WCSS_ECAHB_CLK 157 +#define GCC_XO_CLK 158 +#define GCC_XO_CLK_SRC 159 +#define GMAC0_RX_CLK_SRC 161 +#define GMAC0_TX_CLK_SRC 162 +#define GMAC1_RX_CLK_SRC 163 +#define GMAC1_TX_CLK_SRC 164 +#define GMAC_CLK_SRC 165 +#define GP1_CLK_SRC 166 +#define GP2_CLK_SRC 167 +#define GP3_CLK_SRC 168 +#define LPASS_AXIM_CLK_SRC 169 +#define LPASS_SWAY_CLK_SRC 170 +#define PCIE0_AUX_CLK_SRC 171 +#define PCIE0_AXI_CLK_SRC 172 +#define PCIE1_AUX_CLK_SRC 173 +#define PCIE1_AXI_CLK_SRC 174 +#define PCNOC_BFDCD_CLK_SRC 175 +#define Q6_AXI_CLK_SRC 176 +#define QDSS_AT_CLK_SRC 177 +#define QDSS_STM_CLK_SRC 178 +#define QDSS_TSCTR_CLK_SRC 179 +#define QDSS_TRACECLKIN_CLK_SRC 180 +#define QPIC_IO_MACRO_CLK_SRC 181 +#define SDCC1_APPS_CLK_SRC 182 +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 +#define UBI0_AXI_CLK_SRC 185 +#define UBI0_CORE_CLK_SRC 186 +#define USB0_AUX_CLK_SRC 187 +#define USB0_LFPS_CLK_SRC 188 +#define USB0_MASTER_CLK_SRC 189 +#define USB0_MOCK_UTMI_CLK_SRC 190 +#define WCSS_AHB_CLK_SRC 191 +#define PCIE0_PIPE_CLK_SRC 192 +#define PCIE1_PIPE_CLK_SRC 193 +#define GCC_PCIE0_PIPE_CLK 194 +#define GCC_PCIE1_PIPE_CLK 195 +#define USB0_PIPE_CLK_SRC 196 +#define GCC_USB0_PIPE_CLK 197 +#define GMAC0_RX_DIV_CLK_SRC 198 +#define GMAC0_TX_DIV_CLK_SRC 199 +#define GMAC1_RX_DIV_CLK_SRC 200 +#define GMAC1_TX_DIV_CLK_SRC 201 +#define ADSS_PWM_CLK_SRC 202 +#define GCC_ADSS_PWM_CLK 203 +#endif diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h new file mode 100644 index 000000000000..bdbc974cb6ea --- /dev/null +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H + +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 +#define GCC_BLSP1_BCR 1 +#define GCC_BLSP1_QUP1_BCR 2 +#define GCC_BLSP1_QUP2_BCR 3 +#define GCC_BLSP1_QUP3_BCR 4 +#define GCC_BLSP1_UART1_BCR 5 +#define GCC_BLSP1_UART2_BCR 6 +#define GCC_BOOT_ROM_BCR 7 +#define GCC_BTSS_BCR 8 +#define GCC_CMN_BLK_BCR 9 +#define GCC_CMN_LDO_BCR 10 +#define GCC_CE_BCR 11 +#define GCC_CRYPTO_BCR 12 +#define GCC_DCC_BCR 13 +#define GCC_DCD_BCR 14 +#define GCC_DDRSS_BCR 15 +#define GCC_EDPD_BCR 16 +#define GCC_GEPHY_BCR 17 +#define GCC_GEPHY_MDC_SW_ARES 18 +#define GCC_GEPHY_DSP_HW_ARES 19 +#define GCC_GEPHY_RX_ARES 20 +#define GCC_GEPHY_TX_ARES 21 +#define GCC_GMAC0_BCR 22 +#define GCC_GMAC0_CFG_ARES 23 +#define GCC_GMAC0_SYS_ARES 24 +#define GCC_GMAC1_BCR 25 +#define GCC_GMAC1_CFG_ARES 26 +#define GCC_GMAC1_SYS_ARES 27 +#define GCC_IMEM_BCR 28 +#define GCC_LPASS_BCR 29 +#define GCC_MDIO0_BCR 30 +#define GCC_MDIO1_BCR 31 +#define GCC_MPM_BCR 32 +#define GCC_PCIE0_BCR 33 +#define GCC_PCIE0_LINK_DOWN_BCR 34 +#define GCC_PCIE0_PHY_BCR 35 +#define GCC_PCIE0PHY_PHY_BCR 36 +#define GCC_PCIE0_PIPE_ARES 37 +#define GCC_PCIE0_SLEEP_ARES 38 +#define GCC_PCIE0_CORE_STICKY_ARES 39 +#define GCC_PCIE0_AXI_MASTER_ARES 40 +#define GCC_PCIE0_AXI_SLAVE_ARES 41 +#define GCC_PCIE0_AHB_ARES 42 +#define GCC_PCIE0_AXI_MASTER_STICKY_ARES 43 +#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 44 +#define GCC_PCIE1_BCR 45 +#define GCC_PCIE1_LINK_DOWN_BCR 46 +#define GCC_PCIE1_PHY_BCR 47 +#define GCC_PCIE1PHY_PHY_BCR 48 +#define GCC_PCIE1_PIPE_ARES 49 +#define GCC_PCIE1_SLEEP_ARES 50 +#define GCC_PCIE1_CORE_STICKY_ARES 51 +#define GCC_PCIE1_AXI_MASTER_ARES 52 +#define GCC_PCIE1_AXI_SLAVE_ARES 53 +#define GCC_PCIE1_AHB_ARES 54 +#define GCC_PCIE1_AXI_MASTER_STICKY_ARES 55 +#define GCC_PCIE1_AXI_SLAVE_STICKY_ARES 56 +#define GCC_PCNOC_BCR 57 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 58 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 59 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 60 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 61 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 62 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 63 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 64 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 65 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 66 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 67 +#define GCC_PCNOC_BUS_TIMEOUT10_BCR 68 +#define GCC_PCNOC_BUS_TIMEOUT11_BCR 69 +#define GCC_PRNG_BCR 70 +#define GCC_Q6SS_DBG_ARES 71 +#define GCC_Q6_AHB_S_ARES 72 +#define GCC_Q6_AHB_ARES 73 +#define GCC_Q6_AXIM2_ARES 74 +#define GCC_Q6_AXIM_ARES 75 +#define GCC_Q6_AXIS_ARES 76 +#define GCC_QDSS_BCR 77 +#define GCC_QPIC_BCR 78 +#define GCC_QUSB2_0_PHY_BCR 79 +#define GCC_SDCC1_BCR 80 +#define GCC_SEC_CTRL_BCR 81 +#define GCC_SPDM_BCR 82 +#define GCC_SYSTEM_NOC_BCR 83 +#define GCC_TCSR_BCR 84 +#define GCC_TLMM_BCR 85 +#define GCC_UBI0_AXI_ARES 86 +#define GCC_UBI0_AHB_ARES 87 +#define GCC_UBI0_NC_AXI_ARES 88 +#define GCC_UBI0_DBG_ARES 89 +#define GCC_UBI0_UTCM_ARES 90 +#define GCC_UBI0_CORE_ARES 91 +#define GCC_UBI32_BCR 92 +#define GCC_UNIPHY_BCR 93 +#define GCC_UNIPHY_AHB_ARES 94 +#define GCC_UNIPHY_SYS_ARES 95 +#define GCC_UNIPHY_RX_ARES 96 +#define GCC_UNIPHY_TX_ARES 97 +#define GCC_USB0_BCR 98 +#define GCC_USB0_PHY_BCR 99 +#define GCC_WCSS_BCR 100 +#define GCC_WCSS_DBG_ARES 101 +#define GCC_WCSS_ECAHB_ARES 102 +#define GCC_WCSS_ACMT_ARES 103 +#define GCC_WCSS_DBG_BDG_ARES 104 +#define GCC_WCSS_AHB_S_ARES 105 +#define GCC_WCSS_AXI_M_ARES 106 +#define GCC_WCSS_AXI_S_ARES 107 +#define GCC_WCSS_Q6_BCR 108 +#define GCC_WCSSAON_RESET 109 +#define GCC_UNIPHY_SOFT_RESET 110 +#define GCC_GEPHY_MISC_ARES 111 + +#endif -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset 2022-06-21 16:11 ` Sricharan R @ 2022-06-22 15:04 ` Krzysztof Kozlowski -1 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:04 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > This patch adds support for the global clock controller found on > the IPQ5018 based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../bindings/clock/qcom,gcc-other.yaml | 3 + > include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ > include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ > 3 files changed, 313 insertions(+) > create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h > create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > index 6c45e0f85494..3852346dbcad 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > @@ -29,6 +29,8 @@ description: | > - dt-bindings/clock/qcom,gcc-mdm9615.h > - dt-bindings/reset/qcom,gcc-mdm9615.h > - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) > + - dt-bindings/clock/qcom,gcc-ipq5018.h > + - dt-bindings/reset/qcom,gcc-ipq5018.h > > allOf: > - $ref: "qcom,gcc.yaml#" > @@ -51,6 +53,7 @@ properties: > - qcom,gcc-mdm9615 > - qcom,gcc-sdm630 > - qcom,gcc-sdm660 > + - qcom,gcc-ipq5018 > > required: > - compatible > diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h > new file mode 100644 > index 000000000000..14916600e2a7 > --- /dev/null > +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h > @@ -0,0 +1,188 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ This should be dual-license, as Rob asked last time. It's also favorable for Qualcomm, so there is no problem in that. GPL-2.0-only OR BSD-2-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H > +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H > + > +#define GPLL0_MAIN 0 > +#define GPLL0 1 > +#define GPLL2_MAIN 2 > +#define GPLL2 3 > +#define GPLL4_MAIN 4 > +#define GPLL4 5 > +#define UBI32_PLL_MAIN 6 > +#define UBI32_PLL 7 > +#define APSS_AHB_CLK_SRC 9 > +#define APSS_AHB_POSTDIV_CLK_SRC 10 > +#define APSS_AXI_CLK_SRC 11 > +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 > +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 > +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 > +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 > +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 > +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 > +#define BLSP1_UART1_APPS_CLK_SRC 18 > +#define BLSP1_UART2_APPS_CLK_SRC 19 > +#define CRYPTO_CLK_SRC 20 > +#define GCC_APSS_AHB_CLK 23 No holes in IDs. The IDs are integers incremented by one, serving as an abstract number, not some register offset or register value. > +#define GCC_APSS_AXI_CLK 24 > +#define GCC_BLSP1_AHB_CLK 25 > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 > +#define GCC_BLSP1_UART1_APPS_CLK 33 > +#define GCC_BLSP1_UART2_APPS_CLK 34 > +#define GCC_BTSS_LPO_CLK 36 > +#define GCC_CMN_BLK_AHB_CLK 40 > +#define GCC_CMN_BLK_SYS_CLK 41 > +#define GCC_CRYPTO_AHB_CLK 44 > +#define GCC_CRYPTO_AXI_CLK 45 > +#define GCC_CRYPTO_CLK 46 > +#define GCC_CRYPTO_PPE_CLK 47 > +#define GCC_DCC_CLK 48 > +#define GCC_GEPHY_RX_CLK 53 No holes. > +#define GCC_GEPHY_TX_CLK 54 > +#define GCC_GMAC0_CFG_CLK 55 > +#define GCC_GMAC0_PTP_CLK 56 > +#define GCC_GMAC0_RX_CLK 57 > +#define GCC_GMAC0_SYS_CLK 58 > +#define GCC_GMAC0_TX_CLK 59 > +#define GCC_GMAC1_CFG_CLK 60 > +#define GCC_GMAC1_PTP_CLK 61 > +#define GCC_GMAC1_RX_CLK 62 > +#define GCC_GMAC1_SYS_CLK 63 > +#define GCC_GMAC1_TX_CLK 64 > +#define GCC_GP1_CLK 65 > +#define GCC_GP2_CLK 66 > +#define GCC_GP3_CLK 67 > +#define GCC_LPASS_CORE_AXIM_CLK 69 Ditto. > +#define GCC_LPASS_SWAY_CLK 70 > +#define GCC_MDIO0_AHB_CLK 71 > +#define GCC_MDIO1_AHB_CLK 72 > +#define GCC_PCIE0_AHB_CLK 74 > +#define GCC_PCIE0_AUX_CLK 75 > +#define GCC_PCIE0_AXI_M_CLK 76 > +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 > +#define GCC_PCIE0_AXI_S_CLK 78 > +#define GCC_PCIE1_AHB_CLK 79 > +#define GCC_PCIE1_AUX_CLK 80 > +#define GCC_PCIE1_AXI_M_CLK 81 > +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 > +#define GCC_PCIE1_AXI_S_CLK 83 > +#define GCC_PRNG_AHB_CLK 84 > +#define GCC_Q6_AXIM_CLK 85 > +#define GCC_Q6_AXIM2_CLK 86 > +#define GCC_Q6_AXIS_CLK 87 > +#define GCC_Q6_AHB_CLK 88 > +#define GCC_Q6_AHB_S_CLK 89 > +#define GCC_Q6_TSCTR_1TO2_CLK 90 > +#define GCC_Q6SS_ATBM_CLK 91 > +#define GCC_Q6SS_PCLKDBG_CLK 92 > +#define GCC_Q6SS_TRIG_CLK 93 > +#define GCC_QDSS_AT_CLK 94 > +#define GCC_QDSS_CFG_AHB_CLK 95 > +#define GCC_QDSS_DAP_AHB_CLK 96 > +#define GCC_QDSS_DAP_CLK 97 > +#define GCC_QDSS_ETR_USB_CLK 98 > +#define GCC_QDSS_EUD_AT_CLK 99 > +#define GCC_QDSS_STM_CLK 100 > +#define GCC_QDSS_TRACECLKIN_CLK 101 > +#define GCC_QDSS_TSCTR_DIV8_CLK 102 > +#define GCC_QPIC_AHB_CLK 103 > +#define GCC_QPIC_CLK 104 > +#define GCC_QPIC_IO_MACRO_CLK 105 > +#define GCC_SDCC1_AHB_CLK 107 > +#define GCC_SDCC1_APPS_CLK 108 > +#define GCC_SLEEP_CLK_SRC 109 > +#define GCC_SNOC_GMAC0_AHB_CLK 110 > +#define GCC_SNOC_GMAC0_AXI_CLK 111 > +#define GCC_SNOC_GMAC1_AHB_CLK 112 > +#define GCC_SNOC_GMAC1_AXI_CLK 113 > +#define GCC_SNOC_LPASS_AXIM_CLK 114 > +#define GCC_SNOC_LPASS_SWAY_CLK 115 > +#define GCC_SNOC_UBI0_AXI_CLK 118 Ditto... and in all other places. > +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 > +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 > +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 > +#define GCC_SYS_NOC_USB0_AXI_CLK 123 > +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 > +#define GCC_UBI0_AXI_CLK 128 > +#define GCC_UBI0_CFG_CLK 129 > +#define GCC_UBI0_CORE_CLK 130 > +#define GCC_UBI0_DBG_CLK 131 > +#define GCC_UBI0_NC_AXI_CLK 132 > +#define GCC_UBI0_UTCM_CLK 133 > +#define GCC_UNIPHY_AHB_CLK 134 > +#define GCC_UNIPHY_RX_CLK 135 > +#define GCC_UNIPHY_SYS_CLK 136 > +#define GCC_UNIPHY_TX_CLK 137 > +#define GCC_USB0_AUX_CLK 138 > +#define GCC_USB0_EUD_AT_CLK 139 > +#define GCC_USB0_LFPS_CLK 140 > +#define GCC_USB0_MASTER_CLK 141 > +#define GCC_USB0_MOCK_UTMI_CLK 142 > +#define GCC_USB0_PHY_CFG_AHB_CLK 143 > +#define GCC_USB0_SLEEP_CLK 144 > +#define GCC_WCSS_ACMT_CLK 145 > +#define GCC_WCSS_AHB_S_CLK 146 > +#define GCC_WCSS_AXI_M_CLK 147 > +#define GCC_WCSS_AXI_S_CLK 148 > +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 > +#define GCC_WCSS_DBG_IFC_APB_CLK 150 > +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 > +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 > +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 > +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 > +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 > +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 > +#define GCC_WCSS_ECAHB_CLK 157 > +#define GCC_XO_CLK 158 > +#define GCC_XO_CLK_SRC 159 > +#define GMAC0_RX_CLK_SRC 161 > +#define GMAC0_TX_CLK_SRC 162 > +#define GMAC1_RX_CLK_SRC 163 > +#define GMAC1_TX_CLK_SRC 164 > +#define GMAC_CLK_SRC 165 > +#define GP1_CLK_SRC 166 > +#define GP2_CLK_SRC 167 > +#define GP3_CLK_SRC 168 > +#define LPASS_AXIM_CLK_SRC 169 > +#define LPASS_SWAY_CLK_SRC 170 > +#define PCIE0_AUX_CLK_SRC 171 > +#define PCIE0_AXI_CLK_SRC 172 > +#define PCIE1_AUX_CLK_SRC 173 > +#define PCIE1_AXI_CLK_SRC 174 > +#define PCNOC_BFDCD_CLK_SRC 175 > +#define Q6_AXI_CLK_SRC 176 > +#define QDSS_AT_CLK_SRC 177 > +#define QDSS_STM_CLK_SRC 178 > +#define QDSS_TSCTR_CLK_SRC 179 > +#define QDSS_TRACECLKIN_CLK_SRC 180 > +#define QPIC_IO_MACRO_CLK_SRC 181 > +#define SDCC1_APPS_CLK_SRC 182 > +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 > +#define UBI0_AXI_CLK_SRC 185 > +#define UBI0_CORE_CLK_SRC 186 > +#define USB0_AUX_CLK_SRC 187 > +#define USB0_LFPS_CLK_SRC 188 > +#define USB0_MASTER_CLK_SRC 189 > +#define USB0_MOCK_UTMI_CLK_SRC 190 > +#define WCSS_AHB_CLK_SRC 191 > +#define PCIE0_PIPE_CLK_SRC 192 > +#define PCIE1_PIPE_CLK_SRC 193 > +#define GCC_PCIE0_PIPE_CLK 194 > +#define GCC_PCIE1_PIPE_CLK 195 > +#define USB0_PIPE_CLK_SRC 196 > +#define GCC_USB0_PIPE_CLK 197 > +#define GMAC0_RX_DIV_CLK_SRC 198 > +#define GMAC0_TX_DIV_CLK_SRC 199 > +#define GMAC1_RX_DIV_CLK_SRC 200 > +#define GMAC1_TX_DIV_CLK_SRC 201 > +#define ADSS_PWM_CLK_SRC 202 > +#define GCC_ADSS_PWM_CLK 203 > +#endif > diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h > new file mode 100644 > index 000000000000..bdbc974cb6ea > --- /dev/null > +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h > @@ -0,0 +1,122 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ Dual license > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H > +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H > + > +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 > +#define GCC_BLSP1_BCR 1 > +#define GCC_BLSP1_QUP1_BCR 2 > +#define GCC_BLSP1_QUP2_BCR 3 Such indentation is not Linux coding style. Please drop it. > +#define GCC_BLSP1_QUP3_BCR 4 > +#define GCC_BLSP1_UART1_BCR 5 > +#define GCC_BLSP1_UART2_BCR 6 > +#define GCC_BOOT_ROM_BCR 7 > +#define GCC_BTSS_BCR 8 Best regards, Krzysztof ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset @ 2022-06-22 15:04 ` Krzysztof Kozlowski 0 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:04 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > This patch adds support for the global clock controller found on > the IPQ5018 based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../bindings/clock/qcom,gcc-other.yaml | 3 + > include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ > include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ > 3 files changed, 313 insertions(+) > create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h > create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > index 6c45e0f85494..3852346dbcad 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml > @@ -29,6 +29,8 @@ description: | > - dt-bindings/clock/qcom,gcc-mdm9615.h > - dt-bindings/reset/qcom,gcc-mdm9615.h > - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) > + - dt-bindings/clock/qcom,gcc-ipq5018.h > + - dt-bindings/reset/qcom,gcc-ipq5018.h > > allOf: > - $ref: "qcom,gcc.yaml#" > @@ -51,6 +53,7 @@ properties: > - qcom,gcc-mdm9615 > - qcom,gcc-sdm630 > - qcom,gcc-sdm660 > + - qcom,gcc-ipq5018 > > required: > - compatible > diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h > new file mode 100644 > index 000000000000..14916600e2a7 > --- /dev/null > +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h > @@ -0,0 +1,188 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ This should be dual-license, as Rob asked last time. It's also favorable for Qualcomm, so there is no problem in that. GPL-2.0-only OR BSD-2-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H > +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H > + > +#define GPLL0_MAIN 0 > +#define GPLL0 1 > +#define GPLL2_MAIN 2 > +#define GPLL2 3 > +#define GPLL4_MAIN 4 > +#define GPLL4 5 > +#define UBI32_PLL_MAIN 6 > +#define UBI32_PLL 7 > +#define APSS_AHB_CLK_SRC 9 > +#define APSS_AHB_POSTDIV_CLK_SRC 10 > +#define APSS_AXI_CLK_SRC 11 > +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 > +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 > +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 > +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 > +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 > +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 > +#define BLSP1_UART1_APPS_CLK_SRC 18 > +#define BLSP1_UART2_APPS_CLK_SRC 19 > +#define CRYPTO_CLK_SRC 20 > +#define GCC_APSS_AHB_CLK 23 No holes in IDs. The IDs are integers incremented by one, serving as an abstract number, not some register offset or register value. > +#define GCC_APSS_AXI_CLK 24 > +#define GCC_BLSP1_AHB_CLK 25 > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 > +#define GCC_BLSP1_UART1_APPS_CLK 33 > +#define GCC_BLSP1_UART2_APPS_CLK 34 > +#define GCC_BTSS_LPO_CLK 36 > +#define GCC_CMN_BLK_AHB_CLK 40 > +#define GCC_CMN_BLK_SYS_CLK 41 > +#define GCC_CRYPTO_AHB_CLK 44 > +#define GCC_CRYPTO_AXI_CLK 45 > +#define GCC_CRYPTO_CLK 46 > +#define GCC_CRYPTO_PPE_CLK 47 > +#define GCC_DCC_CLK 48 > +#define GCC_GEPHY_RX_CLK 53 No holes. > +#define GCC_GEPHY_TX_CLK 54 > +#define GCC_GMAC0_CFG_CLK 55 > +#define GCC_GMAC0_PTP_CLK 56 > +#define GCC_GMAC0_RX_CLK 57 > +#define GCC_GMAC0_SYS_CLK 58 > +#define GCC_GMAC0_TX_CLK 59 > +#define GCC_GMAC1_CFG_CLK 60 > +#define GCC_GMAC1_PTP_CLK 61 > +#define GCC_GMAC1_RX_CLK 62 > +#define GCC_GMAC1_SYS_CLK 63 > +#define GCC_GMAC1_TX_CLK 64 > +#define GCC_GP1_CLK 65 > +#define GCC_GP2_CLK 66 > +#define GCC_GP3_CLK 67 > +#define GCC_LPASS_CORE_AXIM_CLK 69 Ditto. > +#define GCC_LPASS_SWAY_CLK 70 > +#define GCC_MDIO0_AHB_CLK 71 > +#define GCC_MDIO1_AHB_CLK 72 > +#define GCC_PCIE0_AHB_CLK 74 > +#define GCC_PCIE0_AUX_CLK 75 > +#define GCC_PCIE0_AXI_M_CLK 76 > +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 > +#define GCC_PCIE0_AXI_S_CLK 78 > +#define GCC_PCIE1_AHB_CLK 79 > +#define GCC_PCIE1_AUX_CLK 80 > +#define GCC_PCIE1_AXI_M_CLK 81 > +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 > +#define GCC_PCIE1_AXI_S_CLK 83 > +#define GCC_PRNG_AHB_CLK 84 > +#define GCC_Q6_AXIM_CLK 85 > +#define GCC_Q6_AXIM2_CLK 86 > +#define GCC_Q6_AXIS_CLK 87 > +#define GCC_Q6_AHB_CLK 88 > +#define GCC_Q6_AHB_S_CLK 89 > +#define GCC_Q6_TSCTR_1TO2_CLK 90 > +#define GCC_Q6SS_ATBM_CLK 91 > +#define GCC_Q6SS_PCLKDBG_CLK 92 > +#define GCC_Q6SS_TRIG_CLK 93 > +#define GCC_QDSS_AT_CLK 94 > +#define GCC_QDSS_CFG_AHB_CLK 95 > +#define GCC_QDSS_DAP_AHB_CLK 96 > +#define GCC_QDSS_DAP_CLK 97 > +#define GCC_QDSS_ETR_USB_CLK 98 > +#define GCC_QDSS_EUD_AT_CLK 99 > +#define GCC_QDSS_STM_CLK 100 > +#define GCC_QDSS_TRACECLKIN_CLK 101 > +#define GCC_QDSS_TSCTR_DIV8_CLK 102 > +#define GCC_QPIC_AHB_CLK 103 > +#define GCC_QPIC_CLK 104 > +#define GCC_QPIC_IO_MACRO_CLK 105 > +#define GCC_SDCC1_AHB_CLK 107 > +#define GCC_SDCC1_APPS_CLK 108 > +#define GCC_SLEEP_CLK_SRC 109 > +#define GCC_SNOC_GMAC0_AHB_CLK 110 > +#define GCC_SNOC_GMAC0_AXI_CLK 111 > +#define GCC_SNOC_GMAC1_AHB_CLK 112 > +#define GCC_SNOC_GMAC1_AXI_CLK 113 > +#define GCC_SNOC_LPASS_AXIM_CLK 114 > +#define GCC_SNOC_LPASS_SWAY_CLK 115 > +#define GCC_SNOC_UBI0_AXI_CLK 118 Ditto... and in all other places. > +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 > +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 > +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 > +#define GCC_SYS_NOC_USB0_AXI_CLK 123 > +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 > +#define GCC_UBI0_AXI_CLK 128 > +#define GCC_UBI0_CFG_CLK 129 > +#define GCC_UBI0_CORE_CLK 130 > +#define GCC_UBI0_DBG_CLK 131 > +#define GCC_UBI0_NC_AXI_CLK 132 > +#define GCC_UBI0_UTCM_CLK 133 > +#define GCC_UNIPHY_AHB_CLK 134 > +#define GCC_UNIPHY_RX_CLK 135 > +#define GCC_UNIPHY_SYS_CLK 136 > +#define GCC_UNIPHY_TX_CLK 137 > +#define GCC_USB0_AUX_CLK 138 > +#define GCC_USB0_EUD_AT_CLK 139 > +#define GCC_USB0_LFPS_CLK 140 > +#define GCC_USB0_MASTER_CLK 141 > +#define GCC_USB0_MOCK_UTMI_CLK 142 > +#define GCC_USB0_PHY_CFG_AHB_CLK 143 > +#define GCC_USB0_SLEEP_CLK 144 > +#define GCC_WCSS_ACMT_CLK 145 > +#define GCC_WCSS_AHB_S_CLK 146 > +#define GCC_WCSS_AXI_M_CLK 147 > +#define GCC_WCSS_AXI_S_CLK 148 > +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 > +#define GCC_WCSS_DBG_IFC_APB_CLK 150 > +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 > +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 > +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 > +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 > +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 > +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 > +#define GCC_WCSS_ECAHB_CLK 157 > +#define GCC_XO_CLK 158 > +#define GCC_XO_CLK_SRC 159 > +#define GMAC0_RX_CLK_SRC 161 > +#define GMAC0_TX_CLK_SRC 162 > +#define GMAC1_RX_CLK_SRC 163 > +#define GMAC1_TX_CLK_SRC 164 > +#define GMAC_CLK_SRC 165 > +#define GP1_CLK_SRC 166 > +#define GP2_CLK_SRC 167 > +#define GP3_CLK_SRC 168 > +#define LPASS_AXIM_CLK_SRC 169 > +#define LPASS_SWAY_CLK_SRC 170 > +#define PCIE0_AUX_CLK_SRC 171 > +#define PCIE0_AXI_CLK_SRC 172 > +#define PCIE1_AUX_CLK_SRC 173 > +#define PCIE1_AXI_CLK_SRC 174 > +#define PCNOC_BFDCD_CLK_SRC 175 > +#define Q6_AXI_CLK_SRC 176 > +#define QDSS_AT_CLK_SRC 177 > +#define QDSS_STM_CLK_SRC 178 > +#define QDSS_TSCTR_CLK_SRC 179 > +#define QDSS_TRACECLKIN_CLK_SRC 180 > +#define QPIC_IO_MACRO_CLK_SRC 181 > +#define SDCC1_APPS_CLK_SRC 182 > +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 > +#define UBI0_AXI_CLK_SRC 185 > +#define UBI0_CORE_CLK_SRC 186 > +#define USB0_AUX_CLK_SRC 187 > +#define USB0_LFPS_CLK_SRC 188 > +#define USB0_MASTER_CLK_SRC 189 > +#define USB0_MOCK_UTMI_CLK_SRC 190 > +#define WCSS_AHB_CLK_SRC 191 > +#define PCIE0_PIPE_CLK_SRC 192 > +#define PCIE1_PIPE_CLK_SRC 193 > +#define GCC_PCIE0_PIPE_CLK 194 > +#define GCC_PCIE1_PIPE_CLK 195 > +#define USB0_PIPE_CLK_SRC 196 > +#define GCC_USB0_PIPE_CLK 197 > +#define GMAC0_RX_DIV_CLK_SRC 198 > +#define GMAC0_TX_DIV_CLK_SRC 199 > +#define GMAC1_RX_DIV_CLK_SRC 200 > +#define GMAC1_TX_DIV_CLK_SRC 201 > +#define ADSS_PWM_CLK_SRC 202 > +#define GCC_ADSS_PWM_CLK 203 > +#endif > diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h > new file mode 100644 > index 000000000000..bdbc974cb6ea > --- /dev/null > +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h > @@ -0,0 +1,122 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ Dual license > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H > +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H > + > +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 > +#define GCC_BLSP1_BCR 1 > +#define GCC_BLSP1_QUP1_BCR 2 > +#define GCC_BLSP1_QUP2_BCR 3 Such indentation is not Linux coding style. Please drop it. > +#define GCC_BLSP1_QUP3_BCR 4 > +#define GCC_BLSP1_UART1_BCR 5 > +#define GCC_BLSP1_UART2_BCR 6 > +#define GCC_BOOT_ROM_BCR 7 > +#define GCC_BTSS_BCR 8 Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset 2022-06-22 15:04 ` Krzysztof Kozlowski @ 2022-06-23 6:00 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:00 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Hi Krzysztof, Thanks a lot for your reviews in all patches. On 6/22/2022 8:34 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> This patch adds support for the global clock controller found on >> the IPQ5018 based devices. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >> --- >> .../bindings/clock/qcom,gcc-other.yaml | 3 + >> include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ >> include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ >> 3 files changed, 313 insertions(+) >> create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h >> create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h >> >> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> index 6c45e0f85494..3852346dbcad 100644 >> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> @@ -29,6 +29,8 @@ description: | >> - dt-bindings/clock/qcom,gcc-mdm9615.h >> - dt-bindings/reset/qcom,gcc-mdm9615.h >> - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) >> + - dt-bindings/clock/qcom,gcc-ipq5018.h >> + - dt-bindings/reset/qcom,gcc-ipq5018.h >> >> allOf: >> - $ref: "qcom,gcc.yaml#" >> @@ -51,6 +53,7 @@ properties: >> - qcom,gcc-mdm9615 >> - qcom,gcc-sdm630 >> - qcom,gcc-sdm660 >> + - qcom,gcc-ipq5018 >> >> required: >> - compatible >> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h >> new file mode 100644 >> index 000000000000..14916600e2a7 >> --- /dev/null >> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h >> @@ -0,0 +1,188 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ > This should be dual-license, as Rob asked last time. It's also favorable > for Qualcomm, so there is no problem in that. > > GPL-2.0-only OR BSD-2-Clause Sure, will change it. >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H >> +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H >> + >> +#define GPLL0_MAIN 0 >> +#define GPLL0 1 >> +#define GPLL2_MAIN 2 >> +#define GPLL2 3 >> +#define GPLL4_MAIN 4 >> +#define GPLL4 5 >> +#define UBI32_PLL_MAIN 6 >> +#define UBI32_PLL 7 >> +#define APSS_AHB_CLK_SRC 9 >> +#define APSS_AHB_POSTDIV_CLK_SRC 10 >> +#define APSS_AXI_CLK_SRC 11 >> +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 >> +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 >> +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 >> +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 >> +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 >> +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 >> +#define BLSP1_UART1_APPS_CLK_SRC 18 >> +#define BLSP1_UART2_APPS_CLK_SRC 19 >> +#define CRYPTO_CLK_SRC 20 >> +#define GCC_APSS_AHB_CLK 23 > No holes in IDs. The IDs are integers incremented by one, serving as an > abstract number, not some register offset or register value. ok. >> +#define GCC_APSS_AXI_CLK 24 >> +#define GCC_BLSP1_AHB_CLK 25 >> +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 >> +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 >> +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 >> +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 >> +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 >> +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 >> +#define GCC_BLSP1_UART1_APPS_CLK 33 >> +#define GCC_BLSP1_UART2_APPS_CLK 34 >> +#define GCC_BTSS_LPO_CLK 36 >> +#define GCC_CMN_BLK_AHB_CLK 40 >> +#define GCC_CMN_BLK_SYS_CLK 41 >> +#define GCC_CRYPTO_AHB_CLK 44 >> +#define GCC_CRYPTO_AXI_CLK 45 >> +#define GCC_CRYPTO_CLK 46 >> +#define GCC_CRYPTO_PPE_CLK 47 >> +#define GCC_DCC_CLK 48 >> +#define GCC_GEPHY_RX_CLK 53 > No holes. ok. >> +#define GCC_GEPHY_TX_CLK 54 >> +#define GCC_GMAC0_CFG_CLK 55 >> +#define GCC_GMAC0_PTP_CLK 56 >> +#define GCC_GMAC0_RX_CLK 57 >> +#define GCC_GMAC0_SYS_CLK 58 >> +#define GCC_GMAC0_TX_CLK 59 >> +#define GCC_GMAC1_CFG_CLK 60 >> +#define GCC_GMAC1_PTP_CLK 61 >> +#define GCC_GMAC1_RX_CLK 62 >> +#define GCC_GMAC1_SYS_CLK 63 >> +#define GCC_GMAC1_TX_CLK 64 >> +#define GCC_GP1_CLK 65 >> +#define GCC_GP2_CLK 66 >> +#define GCC_GP3_CLK 67 >> +#define GCC_LPASS_CORE_AXIM_CLK 69 > Ditto. > >> +#define GCC_LPASS_SWAY_CLK 70 >> +#define GCC_MDIO0_AHB_CLK 71 >> +#define GCC_MDIO1_AHB_CLK 72 >> +#define GCC_PCIE0_AHB_CLK 74 >> +#define GCC_PCIE0_AUX_CLK 75 >> +#define GCC_PCIE0_AXI_M_CLK 76 >> +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 >> +#define GCC_PCIE0_AXI_S_CLK 78 >> +#define GCC_PCIE1_AHB_CLK 79 >> +#define GCC_PCIE1_AUX_CLK 80 >> +#define GCC_PCIE1_AXI_M_CLK 81 >> +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 >> +#define GCC_PCIE1_AXI_S_CLK 83 >> +#define GCC_PRNG_AHB_CLK 84 >> +#define GCC_Q6_AXIM_CLK 85 >> +#define GCC_Q6_AXIM2_CLK 86 >> +#define GCC_Q6_AXIS_CLK 87 >> +#define GCC_Q6_AHB_CLK 88 >> +#define GCC_Q6_AHB_S_CLK 89 >> +#define GCC_Q6_TSCTR_1TO2_CLK 90 >> +#define GCC_Q6SS_ATBM_CLK 91 >> +#define GCC_Q6SS_PCLKDBG_CLK 92 >> +#define GCC_Q6SS_TRIG_CLK 93 >> +#define GCC_QDSS_AT_CLK 94 >> +#define GCC_QDSS_CFG_AHB_CLK 95 >> +#define GCC_QDSS_DAP_AHB_CLK 96 >> +#define GCC_QDSS_DAP_CLK 97 >> +#define GCC_QDSS_ETR_USB_CLK 98 >> +#define GCC_QDSS_EUD_AT_CLK 99 >> +#define GCC_QDSS_STM_CLK 100 >> +#define GCC_QDSS_TRACECLKIN_CLK 101 >> +#define GCC_QDSS_TSCTR_DIV8_CLK 102 >> +#define GCC_QPIC_AHB_CLK 103 >> +#define GCC_QPIC_CLK 104 >> +#define GCC_QPIC_IO_MACRO_CLK 105 >> +#define GCC_SDCC1_AHB_CLK 107 >> +#define GCC_SDCC1_APPS_CLK 108 >> +#define GCC_SLEEP_CLK_SRC 109 >> +#define GCC_SNOC_GMAC0_AHB_CLK 110 >> +#define GCC_SNOC_GMAC0_AXI_CLK 111 >> +#define GCC_SNOC_GMAC1_AHB_CLK 112 >> +#define GCC_SNOC_GMAC1_AXI_CLK 113 >> +#define GCC_SNOC_LPASS_AXIM_CLK 114 >> +#define GCC_SNOC_LPASS_SWAY_CLK 115 >> +#define GCC_SNOC_UBI0_AXI_CLK 118 > Ditto... and in all other places. ok. >> +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 >> +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 >> +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 >> +#define GCC_SYS_NOC_USB0_AXI_CLK 123 >> +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 >> +#define GCC_UBI0_AXI_CLK 128 >> +#define GCC_UBI0_CFG_CLK 129 >> +#define GCC_UBI0_CORE_CLK 130 >> +#define GCC_UBI0_DBG_CLK 131 >> +#define GCC_UBI0_NC_AXI_CLK 132 >> +#define GCC_UBI0_UTCM_CLK 133 >> +#define GCC_UNIPHY_AHB_CLK 134 >> +#define GCC_UNIPHY_RX_CLK 135 >> +#define GCC_UNIPHY_SYS_CLK 136 >> +#define GCC_UNIPHY_TX_CLK 137 >> +#define GCC_USB0_AUX_CLK 138 >> +#define GCC_USB0_EUD_AT_CLK 139 >> +#define GCC_USB0_LFPS_CLK 140 >> +#define GCC_USB0_MASTER_CLK 141 >> +#define GCC_USB0_MOCK_UTMI_CLK 142 >> +#define GCC_USB0_PHY_CFG_AHB_CLK 143 >> +#define GCC_USB0_SLEEP_CLK 144 >> +#define GCC_WCSS_ACMT_CLK 145 >> +#define GCC_WCSS_AHB_S_CLK 146 >> +#define GCC_WCSS_AXI_M_CLK 147 >> +#define GCC_WCSS_AXI_S_CLK 148 >> +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 >> +#define GCC_WCSS_DBG_IFC_APB_CLK 150 >> +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 >> +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 >> +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 >> +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 >> +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 >> +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 >> +#define GCC_WCSS_ECAHB_CLK 157 >> +#define GCC_XO_CLK 158 >> +#define GCC_XO_CLK_SRC 159 >> +#define GMAC0_RX_CLK_SRC 161 >> +#define GMAC0_TX_CLK_SRC 162 >> +#define GMAC1_RX_CLK_SRC 163 >> +#define GMAC1_TX_CLK_SRC 164 >> +#define GMAC_CLK_SRC 165 >> +#define GP1_CLK_SRC 166 >> +#define GP2_CLK_SRC 167 >> +#define GP3_CLK_SRC 168 >> +#define LPASS_AXIM_CLK_SRC 169 >> +#define LPASS_SWAY_CLK_SRC 170 >> +#define PCIE0_AUX_CLK_SRC 171 >> +#define PCIE0_AXI_CLK_SRC 172 >> +#define PCIE1_AUX_CLK_SRC 173 >> +#define PCIE1_AXI_CLK_SRC 174 >> +#define PCNOC_BFDCD_CLK_SRC 175 >> +#define Q6_AXI_CLK_SRC 176 >> +#define QDSS_AT_CLK_SRC 177 >> +#define QDSS_STM_CLK_SRC 178 >> +#define QDSS_TSCTR_CLK_SRC 179 >> +#define QDSS_TRACECLKIN_CLK_SRC 180 >> +#define QPIC_IO_MACRO_CLK_SRC 181 >> +#define SDCC1_APPS_CLK_SRC 182 >> +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 >> +#define UBI0_AXI_CLK_SRC 185 >> +#define UBI0_CORE_CLK_SRC 186 >> +#define USB0_AUX_CLK_SRC 187 >> +#define USB0_LFPS_CLK_SRC 188 >> +#define USB0_MASTER_CLK_SRC 189 >> +#define USB0_MOCK_UTMI_CLK_SRC 190 >> +#define WCSS_AHB_CLK_SRC 191 >> +#define PCIE0_PIPE_CLK_SRC 192 >> +#define PCIE1_PIPE_CLK_SRC 193 >> +#define GCC_PCIE0_PIPE_CLK 194 >> +#define GCC_PCIE1_PIPE_CLK 195 >> +#define USB0_PIPE_CLK_SRC 196 >> +#define GCC_USB0_PIPE_CLK 197 >> +#define GMAC0_RX_DIV_CLK_SRC 198 >> +#define GMAC0_TX_DIV_CLK_SRC 199 >> +#define GMAC1_RX_DIV_CLK_SRC 200 >> +#define GMAC1_TX_DIV_CLK_SRC 201 >> +#define ADSS_PWM_CLK_SRC 202 >> +#define GCC_ADSS_PWM_CLK 203 >> +#endif >> diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h >> new file mode 100644 >> index 000000000000..bdbc974cb6ea >> --- /dev/null >> +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h >> @@ -0,0 +1,122 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ > Dual license > ok. >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H >> +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H >> + >> +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 >> +#define GCC_BLSP1_BCR 1 >> +#define GCC_BLSP1_QUP1_BCR 2 >> +#define GCC_BLSP1_QUP2_BCR 3 > Such indentation is not Linux coding style. Please drop it. ok, will fix it. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset @ 2022-06-23 6:00 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:00 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Hi Krzysztof, Thanks a lot for your reviews in all patches. On 6/22/2022 8:34 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> This patch adds support for the global clock controller found on >> the IPQ5018 based devices. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >> --- >> .../bindings/clock/qcom,gcc-other.yaml | 3 + >> include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ >> include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ >> 3 files changed, 313 insertions(+) >> create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h >> create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h >> >> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> index 6c45e0f85494..3852346dbcad 100644 >> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml >> @@ -29,6 +29,8 @@ description: | >> - dt-bindings/clock/qcom,gcc-mdm9615.h >> - dt-bindings/reset/qcom,gcc-mdm9615.h >> - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) >> + - dt-bindings/clock/qcom,gcc-ipq5018.h >> + - dt-bindings/reset/qcom,gcc-ipq5018.h >> >> allOf: >> - $ref: "qcom,gcc.yaml#" >> @@ -51,6 +53,7 @@ properties: >> - qcom,gcc-mdm9615 >> - qcom,gcc-sdm630 >> - qcom,gcc-sdm660 >> + - qcom,gcc-ipq5018 >> >> required: >> - compatible >> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h >> new file mode 100644 >> index 000000000000..14916600e2a7 >> --- /dev/null >> +++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h >> @@ -0,0 +1,188 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ > This should be dual-license, as Rob asked last time. It's also favorable > for Qualcomm, so there is no problem in that. > > GPL-2.0-only OR BSD-2-Clause Sure, will change it. >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H >> +#define _DT_BINDINGS_CLOCK_IPQ_GCC_5018_H >> + >> +#define GPLL0_MAIN 0 >> +#define GPLL0 1 >> +#define GPLL2_MAIN 2 >> +#define GPLL2 3 >> +#define GPLL4_MAIN 4 >> +#define GPLL4 5 >> +#define UBI32_PLL_MAIN 6 >> +#define UBI32_PLL 7 >> +#define APSS_AHB_CLK_SRC 9 >> +#define APSS_AHB_POSTDIV_CLK_SRC 10 >> +#define APSS_AXI_CLK_SRC 11 >> +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 12 >> +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 13 >> +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 14 >> +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 15 >> +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 16 >> +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 17 >> +#define BLSP1_UART1_APPS_CLK_SRC 18 >> +#define BLSP1_UART2_APPS_CLK_SRC 19 >> +#define CRYPTO_CLK_SRC 20 >> +#define GCC_APSS_AHB_CLK 23 > No holes in IDs. The IDs are integers incremented by one, serving as an > abstract number, not some register offset or register value. ok. >> +#define GCC_APSS_AXI_CLK 24 >> +#define GCC_BLSP1_AHB_CLK 25 >> +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 26 >> +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 27 >> +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 28 >> +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 29 >> +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 30 >> +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 31 >> +#define GCC_BLSP1_UART1_APPS_CLK 33 >> +#define GCC_BLSP1_UART2_APPS_CLK 34 >> +#define GCC_BTSS_LPO_CLK 36 >> +#define GCC_CMN_BLK_AHB_CLK 40 >> +#define GCC_CMN_BLK_SYS_CLK 41 >> +#define GCC_CRYPTO_AHB_CLK 44 >> +#define GCC_CRYPTO_AXI_CLK 45 >> +#define GCC_CRYPTO_CLK 46 >> +#define GCC_CRYPTO_PPE_CLK 47 >> +#define GCC_DCC_CLK 48 >> +#define GCC_GEPHY_RX_CLK 53 > No holes. ok. >> +#define GCC_GEPHY_TX_CLK 54 >> +#define GCC_GMAC0_CFG_CLK 55 >> +#define GCC_GMAC0_PTP_CLK 56 >> +#define GCC_GMAC0_RX_CLK 57 >> +#define GCC_GMAC0_SYS_CLK 58 >> +#define GCC_GMAC0_TX_CLK 59 >> +#define GCC_GMAC1_CFG_CLK 60 >> +#define GCC_GMAC1_PTP_CLK 61 >> +#define GCC_GMAC1_RX_CLK 62 >> +#define GCC_GMAC1_SYS_CLK 63 >> +#define GCC_GMAC1_TX_CLK 64 >> +#define GCC_GP1_CLK 65 >> +#define GCC_GP2_CLK 66 >> +#define GCC_GP3_CLK 67 >> +#define GCC_LPASS_CORE_AXIM_CLK 69 > Ditto. > >> +#define GCC_LPASS_SWAY_CLK 70 >> +#define GCC_MDIO0_AHB_CLK 71 >> +#define GCC_MDIO1_AHB_CLK 72 >> +#define GCC_PCIE0_AHB_CLK 74 >> +#define GCC_PCIE0_AUX_CLK 75 >> +#define GCC_PCIE0_AXI_M_CLK 76 >> +#define GCC_PCIE0_AXI_S_BRIDGE_CLK 77 >> +#define GCC_PCIE0_AXI_S_CLK 78 >> +#define GCC_PCIE1_AHB_CLK 79 >> +#define GCC_PCIE1_AUX_CLK 80 >> +#define GCC_PCIE1_AXI_M_CLK 81 >> +#define GCC_PCIE1_AXI_S_BRIDGE_CLK 82 >> +#define GCC_PCIE1_AXI_S_CLK 83 >> +#define GCC_PRNG_AHB_CLK 84 >> +#define GCC_Q6_AXIM_CLK 85 >> +#define GCC_Q6_AXIM2_CLK 86 >> +#define GCC_Q6_AXIS_CLK 87 >> +#define GCC_Q6_AHB_CLK 88 >> +#define GCC_Q6_AHB_S_CLK 89 >> +#define GCC_Q6_TSCTR_1TO2_CLK 90 >> +#define GCC_Q6SS_ATBM_CLK 91 >> +#define GCC_Q6SS_PCLKDBG_CLK 92 >> +#define GCC_Q6SS_TRIG_CLK 93 >> +#define GCC_QDSS_AT_CLK 94 >> +#define GCC_QDSS_CFG_AHB_CLK 95 >> +#define GCC_QDSS_DAP_AHB_CLK 96 >> +#define GCC_QDSS_DAP_CLK 97 >> +#define GCC_QDSS_ETR_USB_CLK 98 >> +#define GCC_QDSS_EUD_AT_CLK 99 >> +#define GCC_QDSS_STM_CLK 100 >> +#define GCC_QDSS_TRACECLKIN_CLK 101 >> +#define GCC_QDSS_TSCTR_DIV8_CLK 102 >> +#define GCC_QPIC_AHB_CLK 103 >> +#define GCC_QPIC_CLK 104 >> +#define GCC_QPIC_IO_MACRO_CLK 105 >> +#define GCC_SDCC1_AHB_CLK 107 >> +#define GCC_SDCC1_APPS_CLK 108 >> +#define GCC_SLEEP_CLK_SRC 109 >> +#define GCC_SNOC_GMAC0_AHB_CLK 110 >> +#define GCC_SNOC_GMAC0_AXI_CLK 111 >> +#define GCC_SNOC_GMAC1_AHB_CLK 112 >> +#define GCC_SNOC_GMAC1_AXI_CLK 113 >> +#define GCC_SNOC_LPASS_AXIM_CLK 114 >> +#define GCC_SNOC_LPASS_SWAY_CLK 115 >> +#define GCC_SNOC_UBI0_AXI_CLK 118 > Ditto... and in all other places. ok. >> +#define GCC_SYS_NOC_PCIE0_AXI_CLK 119 >> +#define GCC_SYS_NOC_PCIE1_AXI_CLK 120 >> +#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 121 >> +#define GCC_SYS_NOC_USB0_AXI_CLK 123 >> +#define GCC_SYS_NOC_WCSS_AHB_CLK 124 >> +#define GCC_UBI0_AXI_CLK 128 >> +#define GCC_UBI0_CFG_CLK 129 >> +#define GCC_UBI0_CORE_CLK 130 >> +#define GCC_UBI0_DBG_CLK 131 >> +#define GCC_UBI0_NC_AXI_CLK 132 >> +#define GCC_UBI0_UTCM_CLK 133 >> +#define GCC_UNIPHY_AHB_CLK 134 >> +#define GCC_UNIPHY_RX_CLK 135 >> +#define GCC_UNIPHY_SYS_CLK 136 >> +#define GCC_UNIPHY_TX_CLK 137 >> +#define GCC_USB0_AUX_CLK 138 >> +#define GCC_USB0_EUD_AT_CLK 139 >> +#define GCC_USB0_LFPS_CLK 140 >> +#define GCC_USB0_MASTER_CLK 141 >> +#define GCC_USB0_MOCK_UTMI_CLK 142 >> +#define GCC_USB0_PHY_CFG_AHB_CLK 143 >> +#define GCC_USB0_SLEEP_CLK 144 >> +#define GCC_WCSS_ACMT_CLK 145 >> +#define GCC_WCSS_AHB_S_CLK 146 >> +#define GCC_WCSS_AXI_M_CLK 147 >> +#define GCC_WCSS_AXI_S_CLK 148 >> +#define GCC_WCSS_DBG_IFC_APB_BDG_CLK 149 >> +#define GCC_WCSS_DBG_IFC_APB_CLK 150 >> +#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK 151 >> +#define GCC_WCSS_DBG_IFC_ATB_CLK 152 >> +#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK 153 >> +#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 154 >> +#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK 155 >> +#define GCC_WCSS_DBG_IFC_NTS_CLK 156 >> +#define GCC_WCSS_ECAHB_CLK 157 >> +#define GCC_XO_CLK 158 >> +#define GCC_XO_CLK_SRC 159 >> +#define GMAC0_RX_CLK_SRC 161 >> +#define GMAC0_TX_CLK_SRC 162 >> +#define GMAC1_RX_CLK_SRC 163 >> +#define GMAC1_TX_CLK_SRC 164 >> +#define GMAC_CLK_SRC 165 >> +#define GP1_CLK_SRC 166 >> +#define GP2_CLK_SRC 167 >> +#define GP3_CLK_SRC 168 >> +#define LPASS_AXIM_CLK_SRC 169 >> +#define LPASS_SWAY_CLK_SRC 170 >> +#define PCIE0_AUX_CLK_SRC 171 >> +#define PCIE0_AXI_CLK_SRC 172 >> +#define PCIE1_AUX_CLK_SRC 173 >> +#define PCIE1_AXI_CLK_SRC 174 >> +#define PCNOC_BFDCD_CLK_SRC 175 >> +#define Q6_AXI_CLK_SRC 176 >> +#define QDSS_AT_CLK_SRC 177 >> +#define QDSS_STM_CLK_SRC 178 >> +#define QDSS_TSCTR_CLK_SRC 179 >> +#define QDSS_TRACECLKIN_CLK_SRC 180 >> +#define QPIC_IO_MACRO_CLK_SRC 181 >> +#define SDCC1_APPS_CLK_SRC 182 >> +#define SYSTEM_NOC_BFDCD_CLK_SRC 184 >> +#define UBI0_AXI_CLK_SRC 185 >> +#define UBI0_CORE_CLK_SRC 186 >> +#define USB0_AUX_CLK_SRC 187 >> +#define USB0_LFPS_CLK_SRC 188 >> +#define USB0_MASTER_CLK_SRC 189 >> +#define USB0_MOCK_UTMI_CLK_SRC 190 >> +#define WCSS_AHB_CLK_SRC 191 >> +#define PCIE0_PIPE_CLK_SRC 192 >> +#define PCIE1_PIPE_CLK_SRC 193 >> +#define GCC_PCIE0_PIPE_CLK 194 >> +#define GCC_PCIE1_PIPE_CLK 195 >> +#define USB0_PIPE_CLK_SRC 196 >> +#define GCC_USB0_PIPE_CLK 197 >> +#define GMAC0_RX_DIV_CLK_SRC 198 >> +#define GMAC0_TX_DIV_CLK_SRC 199 >> +#define GMAC1_RX_DIV_CLK_SRC 200 >> +#define GMAC1_TX_DIV_CLK_SRC 201 >> +#define ADSS_PWM_CLK_SRC 202 >> +#define GCC_ADSS_PWM_CLK 203 >> +#endif >> diff --git a/include/dt-bindings/reset/qcom,gcc-ipq5018.h b/include/dt-bindings/reset/qcom,gcc-ipq5018.h >> new file mode 100644 >> index 000000000000..bdbc974cb6ea >> --- /dev/null >> +++ b/include/dt-bindings/reset/qcom,gcc-ipq5018.h >> @@ -0,0 +1,122 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ > Dual license > ok. >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +#ifndef _DT_BINDINGS_RESET_IPQ_GCC_5018_H >> +#define _DT_BINDINGS_RESET_IPQ_GCC_5018_H >> + >> +#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 0 >> +#define GCC_BLSP1_BCR 1 >> +#define GCC_BLSP1_QUP1_BCR 2 >> +#define GCC_BLSP1_QUP2_BCR 3 > Such indentation is not Linux coding style. Please drop it. ok, will fix it. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset 2022-06-21 16:11 ` Sricharan R @ 2022-06-24 17:26 ` Rob Herring -1 siblings, 0 replies; 65+ messages in thread From: Rob Herring @ 2022-06-24 17:26 UTC (permalink / raw) To: Sricharan R Cc: linux-kernel, linux-gpio, linux-arm-kernel, quic_varada, linus.walleij, catalin.marinas, mturquette, robh+dt, p.zabel, linux-clk, krzysztof.kozlowski+dt, sboyd, bjorn.andersson, linux-arm-msm, agross, devicetree On Tue, 21 Jun 2022 21:41:20 +0530, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > This patch adds support for the global clock controller found on > the IPQ5018 based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../bindings/clock/qcom,gcc-other.yaml | 3 + > include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ > include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ > 3 files changed, 313 insertions(+) > create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h > create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ gcc@1800000: '#power-domain-cells' is a required property arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb gcc@1800000: Unevaluated properties are not allowed ('#clock-cells', '#reset-cells', 'clock-names', 'clocks', 'reg' were unexpected) arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset @ 2022-06-24 17:26 ` Rob Herring 0 siblings, 0 replies; 65+ messages in thread From: Rob Herring @ 2022-06-24 17:26 UTC (permalink / raw) To: Sricharan R Cc: linux-kernel, linux-gpio, linux-arm-kernel, quic_varada, linus.walleij, catalin.marinas, mturquette, robh+dt, p.zabel, linux-clk, krzysztof.kozlowski+dt, sboyd, bjorn.andersson, linux-arm-msm, agross, devicetree On Tue, 21 Jun 2022 21:41:20 +0530, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > This patch adds support for the global clock controller found on > the IPQ5018 based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../bindings/clock/qcom,gcc-other.yaml | 3 + > include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 ++++++++++++++++++ > include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 ++++++++++++ > 3 files changed, 313 insertions(+) > create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h > create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ gcc@1800000: '#power-domain-cells' is a required property arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb gcc@1800000: Unevaluated properties are not allowed ('#clock-cells', '#reset-cells', 'clock-names', 'clocks', 'reg' were unexpected) arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-21 16:11 ` Sricharan R ` (2 preceding siblings ...) (?) @ 2022-06-21 16:11 ` Sricharan R 2022-06-22 15:08 ` Krzysztof Kozlowski ` (2 more replies) -1 siblings, 3 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add support for the global clock controller found on IPQ5018 based devices. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/clk/qcom/Kconfig | 7 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++ 3 files changed, 4003 insertions(+) create mode 100644 drivers/clk/qcom/gcc-ipq5018.c diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index d01436be6d7a..294fb975db85 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -172,6 +172,13 @@ config IPQ_GCC_8074 i2c, USB, SD/eMMC, etc. Select this for the root clock of ipq8074. +config IPQ_GCC_5018 + tristate "IPQ5018 Global Clock Controller" + help + Support for global clock controller on ipq5018 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" help diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 671cf5821af1..33ab4ce9b863 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c new file mode 100644 index 000000000000..0024053c8b08 --- /dev/null +++ b/drivers/clk/qcom/gcc-ipq5018.c @@ -0,0 +1,3995 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> + +#include "common.h" +#include "clk-regmap.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-branch.h" +#include "clk-alpha-pll.h" +#include "clk-regmap-divider.h" +#include "clk-regmap-mux.h" +#include "reset.h" + +enum { + P_XO, + P_GPLL0, + P_GPLL0_DIV2, + P_GPLL2, + P_GPLL4, + P_UBI32_PLL, + P_GEPHY_RX, + P_GEPHY_TX, + P_UNIPHY_RX, + P_UNIPHY_TX, + P_CORE_PI_SLEEP_CLK, + P_PCIE20_PHY0_PIPE, + P_PCIE20_PHY1_PIPE, + P_USB3PHY_0_PIPE, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL0_DIV2, 4 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_gpll0_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { + { P_XO, 0 }, + { P_GPLL0_DIV2, 2 }, + { P_GPLL0, 1 }, +}; + +static const struct clk_parent_data gcc_xo_ubi32_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "ubi32_pll", .name = "ubi32_pll", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_ubi32_gpll0_map[] = { + { P_XO, 0 }, + { P_UBI32_PLL, 1 }, + { P_GPLL0, 2 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll2", .name = "gpll2", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll2_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL2, 2 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll4[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll2", .name = "gpll2", }, + { .fw_name = "gpll4", .name = "gpll4", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll2_gpll4_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL2, 2 }, + { P_GPLL4, 3 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, +}; + +static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { + { P_XO, 0 }, + { P_GPLL0_DIV2, 1 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll4", .name = "gpll4", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL4, 2 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_core_pi_sleep_clk[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "sleep_clk", .name = "sleep_clk", }, +}; + +static const struct parent_map gcc_xo_gpll0_core_pi_sleep_clk_map[] = { + { P_XO, 0 }, + { P_GPLL0, 2 }, + { P_CORE_PI_SLEEP_CLK, 6 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, + { .fw_name = "sleep_clk", .name = "sleep_clk", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL0_DIV2, 4 }, + { P_CORE_PI_SLEEP_CLK, 6 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll2", .name = "gpll2", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL2, 2 }, + { P_GPLL0_DIV2, 4 }, +}; + +static const struct clk_parent_data gcc_xo_gpll4_gpll0_gpll0_out_main_div2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll4", .name = "gpll4", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, +}; + +static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1[] = { + { P_XO, 0 }, + { P_GPLL4, 1 }, + { P_GPLL0, 2 }, + { P_GPLL0_DIV2, 4 }, +}; + +static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map2[] = { + { P_XO, 0 }, + { P_GPLL4, 1 }, + { P_GPLL0, 3 }, + { P_GPLL0_DIV2, 4 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll2[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gpll0", .name = "gpll0", }, + { .fw_name = "gpll4", .name = "gpll4", }, + { .fw_name = "gpll2", .name = "gpll2", }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_gpll2_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL4, 3 }, + { P_GPLL2, 4 }, +}; + +static const struct clk_parent_data gcc_xo_gephy_gcc_rx_gephy_gcc_tx_ubi32_pll_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gephy_gcc_rx", .name = "gephy_gcc_rx", }, + { .fw_name = "gephy_gcc_tx", .name = "gephy_gcc_tx", }, + { .fw_name = "ubi32_pll", .name = "ubi32_pll", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_gephy_gcc_rx_gephy_gcc_tx_ubi32_pll_gpll0_map[] = { + { P_XO, 0 }, + { P_GEPHY_RX, 1 }, + { P_GEPHY_TX, 2 }, + { P_UBI32_PLL, 3 }, + { P_GPLL0, 4 }, +}; + +static const struct clk_parent_data gcc_xo_gephy_gcc_tx_gephy_gcc_rx_ubi32_pll_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "gephy_gcc_tx", .name = "gephy_gcc_tx", }, + { .fw_name = "gephy_gcc_rx", .name = "gephy_gcc_rx", }, + { .fw_name = "ubi32_pll", .name = "ubi32_pll", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_gephy_gcc_tx_gephy_gcc_rx_ubi32_pll_gpll0_map[] = { + { P_XO, 0 }, + { P_GEPHY_TX, 1 }, + { P_GEPHY_RX, 2 }, + { P_UBI32_PLL, 3 }, + { P_GPLL0, 4 }, +}; + +static const struct clk_parent_data gcc_xo_uniphy_gcc_rx_uniphy_gcc_tx_ubi32_pll_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "uniphy_gcc_rx", .name = "uniphy_gcc_rx", }, + { .fw_name = "uniphy_gcc_tx", .name = "uniphy_gcc_tx", }, + { .fw_name = "ubi32_pll", .name = "ubi32_pll", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_uniphy_gcc_rx_uniphy_gcc_tx_ubi32_pll_gpll0_map[] = { + { P_XO, 0 }, + { P_UNIPHY_RX, 1 }, + { P_UNIPHY_TX, 2 }, + { P_UBI32_PLL, 3 }, + { P_GPLL0, 4 }, +}; + +static const struct clk_parent_data gcc_xo_uniphy_gcc_tx_uniphy_gcc_rx_ubi32_pll_gpll0[] = { + { .fw_name = "xo", .name = "xo", }, + { .fw_name = "uniphy_gcc_tx", .name = "uniphy_gcc_tx", }, + { .fw_name = "uniphy_gcc_rx", .name = "uniphy_gcc_rx", }, + { .fw_name = "ubi32_pll", .name = "ubi32_pll", }, + { .fw_name = "gpll0", .name = "gpll0", }, +}; + +static const struct parent_map gcc_xo_uniphy_gcc_tx_uniphy_gcc_rx_ubi32_pll_gpll0_map[] = { + { P_XO, 0 }, + { P_UNIPHY_TX, 1 }, + { P_UNIPHY_RX, 2 }, + { P_UBI32_PLL, 3 }, + { P_GPLL0, 4 }, +}; + +static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { + { .fw_name = "pcie20_phy0_pipe_clk", .name = "pcie20_phy0_pipe_clk", }, + { .fw_name = "xo", .name = "xo", }, +}; + +static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { + { P_PCIE20_PHY0_PIPE, 0 }, + { P_XO, 2 }, +}; + +static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { + { .fw_name = "pcie20_phy1_pipe_clk", .name = "pcie20_phy1_pipe_clk", }, + { .fw_name = "xo", .name = "xo", }, +}; + +static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { + { P_PCIE20_PHY1_PIPE, 0 }, + { P_XO, 2 }, +}; + +static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { + { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk", }, + { .fw_name = "xo", .name = "xo", }, +}; + +static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { + { P_USB3PHY_0_PIPE, 0 }, + { P_XO, 2 }, +}; + +static struct clk_alpha_pll gpll0_main = { + .offset = 0x21000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0_main", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xo", + .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_stromer_ops, + .flags = CLK_IS_CRITICAL, + }, + }, +}; + +static struct clk_fixed_factor gpll0_out_main_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "gpll0_out_main_div2", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gpll0_main", + .name = "gpll0_main", + }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll_postdiv gpll0 = { + .offset = 0x21000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gpll0_main", + .name = "gpll0_main", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll gpll2_main = { + .offset = 0x4a000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gpll2_main", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xo", + .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_stromer_ops, + .flags = CLK_IS_CRITICAL, + }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll2 = { + .offset = 0x4a000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll2", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gpll2_main", + .name = "gpll2_main", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll gpll4_main = { + .offset = 0x24000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gpll4_main", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xo", + .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_stromer_ops, + .flags = CLK_IS_CRITICAL, + }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll4 = { + .offset = 0x24000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll4", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gpll4_main", + .name = "gpll4_main", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll ubi32_pll_main = { + .offset = 0x25000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "ubi32_pll_main", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xo", + .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_stromer_ops, + }, + }, +}; + +static struct clk_alpha_pll_postdiv ubi32_pll = { + .offset = 0x25000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi32_pll", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "ubi32_pll_main", + .name = "ubi32_pll_main", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_adss_pwm_clk_src[] = { + F(24000000, P_XO, 1, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + { } +}; + +static struct clk_rcg2 adss_pwm_clk_src = { + .cmd_rcgr = 0x1f008, + .freq_tbl = ftbl_adss_pwm_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "adss_pwm_clk_src", + .parent_data = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_apss_ahb_clk_src[] = { + F(100000000, P_GPLL0, 8, 0, 0), + { } +}; + +static struct clk_rcg2 apss_ahb_clk_src = { + .cmd_rcgr = 0x46000, + .mnd_width = 0, + .hid_width = 5, + .freq_tbl = ftbl_apss_ahb_clk_src, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apss_ahb_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_regmap_div apss_ahb_postdiv_clk_src = { + .reg = 0x46018, + .shift = 4, + .width = 4, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "apss_ahb_postdiv_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "apss_ahb_clk_src", + .name = "apss_ahb_clk_src", + }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_apss_axi_clk_src[] = { + F(400000000, P_GPLL0, 2, 0, 0), + { } +}; + +static struct clk_rcg2 apss_axi_clk_src = { + .cmd_rcgr = 0x38048, + .freq_tbl = ftbl_apss_axi_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apss_axi_clk_src", + .parent_data = gcc_xo_gpll0_gpll4, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_blsp1_qup_i2c_apps_clk_src[] = { + F(50000000, P_GPLL0, 16, 0, 0), + { } +}; + +static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = { + .cmd_rcgr = 0x0200c, + .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_i2c_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = { + .cmd_rcgr = 0x03000, + .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_i2c_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup3_i2c_apps_clk_src = { + .cmd_rcgr = 0x04000, + .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_i2c_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_blsp1_qup_spi_apps_clk_src[] = { + F(960000, P_XO, 10, 2, 5), + F(4800000, P_XO, 5, 0, 0), + F(9600000, P_XO, 2, 4, 5), + F(16000000, P_GPLL0, 10, 1, 5), + F(24000000, P_XO, 1, 0, 0), + F(50000000, P_GPLL0, 16, 0, 0), + { } +}; + +static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = { + .cmd_rcgr = 0x02024, + .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_spi_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = { + .cmd_rcgr = 0x03014, + .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_spi_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup3_spi_apps_clk_src = { + .cmd_rcgr = 0x04014, + .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_spi_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_blsp1_uart_apps_clk_src[] = { + F(3686400, P_GPLL0_DIV2, 1, 144, 15625), + F(7372800, P_GPLL0_DIV2, 1, 288, 15625), + F(14745600, P_GPLL0_DIV2, 1, 576, 15625), + F(24000000, P_XO, 1, 0, 0), + F(25000000, P_GPLL0, 16, 1, 2), + F(40000000, P_GPLL0, 1, 1, 20), + F(46400000, P_GPLL0, 1, 29, 500), + F(48000000, P_GPLL0, 1, 3, 50), + F(51200000, P_GPLL0, 1, 8, 125), + F(56000000, P_GPLL0, 1, 7, 100), + F(58982400, P_GPLL0, 1, 1152, 15625), + F(60000000, P_GPLL0, 1, 3, 40), + F(64000000, P_GPLL0, 10, 4, 5), + { } +}; + +static struct clk_rcg2 blsp1_uart1_apps_clk_src = { + .cmd_rcgr = 0x02044, + .freq_tbl = ftbl_blsp1_uart_apps_clk_src, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart1_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_uart2_apps_clk_src = { + .cmd_rcgr = 0x03034, + .freq_tbl = ftbl_blsp1_uart_apps_clk_src, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart2_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_crypto_clk_src[] = { + F(160000000, P_GPLL0, 5, 0, 0), + { } +}; + +static struct clk_rcg2 crypto_clk_src = { + .cmd_rcgr = 0x16004, + .freq_tbl = ftbl_crypto_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "crypto_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gmac0_tx_clk_src[] = { + F(2500000, P_GEPHY_TX, 5, 0, 0), + F(24000000, P_XO, 1, 0, 0), + F(25000000, P_GEPHY_TX, 5, 0, 0), + F(125000000, P_GEPHY_TX, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gmac0_rx_clk_src = { + .cmd_rcgr = 0x68020, + .parent_map = gcc_xo_gephy_gcc_rx_gephy_gcc_tx_ubi32_pll_gpll0_map, + .hid_width = 5, + .freq_tbl = ftbl_gmac0_tx_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gmac0_rx_clk_src", + .parent_data = gcc_xo_gephy_gcc_rx_gephy_gcc_tx_ubi32_pll_gpll0, + .num_parents = 5, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_div gmac0_rx_div_clk_src = { + .reg = 0x68420, + .shift = 0, + .width = 4, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "gmac0_rx_div_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_rx_clk_src", + .name = "gmac0_rx_clk_src", + }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_rcg2 gmac0_tx_clk_src = { + .cmd_rcgr = 0x68028, + .parent_map = gcc_xo_gephy_gcc_tx_gephy_gcc_rx_ubi32_pll_gpll0_map, + .hid_width = 5, + .freq_tbl = ftbl_gmac0_tx_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gmac0_tx_clk_src", + .parent_data = gcc_xo_gephy_gcc_tx_gephy_gcc_rx_ubi32_pll_gpll0, + .num_parents = 5, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_div gmac0_tx_div_clk_src = { + .reg = 0x68424, + .shift = 0, + .width = 4, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "gmac0_tx_div_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_tx_clk_src", + .name = "gmac0_tx_clk_src", + }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static const struct freq_tbl ftbl_gmac1_rx_clk_src[] = { + F(2500000, P_UNIPHY_RX, 12.5, 0, 0), + F(24000000, P_XO, 1, 0, 0), + F(25000000, P_UNIPHY_RX, 2.5, 0, 0), + F(125000000, P_UNIPHY_RX, 2.5, 0, 0), + F(125000000, P_UNIPHY_RX, 1, 0, 0), + F(312500000, P_UNIPHY_RX, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gmac1_rx_clk_src = { + .cmd_rcgr = 0x68030, + .parent_map = gcc_xo_uniphy_gcc_rx_uniphy_gcc_tx_ubi32_pll_gpll0_map, + .hid_width = 5, + .freq_tbl = ftbl_gmac1_rx_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gmac1_rx_clk_src", + .parent_data = gcc_xo_uniphy_gcc_rx_uniphy_gcc_tx_ubi32_pll_gpll0, + .num_parents = 5, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_div gmac1_rx_div_clk_src = { + .reg = 0x68430, + .shift = 0, + .width = 4, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "gmac1_rx_div_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_rx_clk_src", + .name = "gmac1_rx_clk_src", + }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static const struct freq_tbl ftbl_gmac1_tx_clk_src[] = { + F(2500000, P_UNIPHY_TX, 12.5, 0, 0), + F(24000000, P_XO, 1, 0, 0), + F(25000000, P_UNIPHY_TX, 2.5, 0, 0), + F(125000000, P_UNIPHY_TX, 2.5, 0, 0), + F(125000000, P_UNIPHY_TX, 1, 0, 0), + F(312500000, P_UNIPHY_TX, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gmac1_tx_clk_src = { + .cmd_rcgr = 0x68038, + .parent_map = gcc_xo_uniphy_gcc_tx_uniphy_gcc_rx_ubi32_pll_gpll0_map, + .hid_width = 5, + .freq_tbl = ftbl_gmac1_tx_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gmac1_tx_clk_src", + .parent_data = gcc_xo_uniphy_gcc_tx_uniphy_gcc_rx_ubi32_pll_gpll0, + .num_parents = 5, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_div gmac1_tx_div_clk_src = { + .reg = 0x68434, + .shift = 0, + .width = 4, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "gmac1_tx_div_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_tx_clk_src", + .name = "gmac1_tx_clk_src", + }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static const struct freq_tbl ftbl_gmac_clk_src[] = { + F(240000000, P_GPLL4, 5, 0, 0), + { } +}; + +static struct clk_rcg2 gmac_clk_src = { + .cmd_rcgr = 0x68080, + .parent_map = gcc_xo_gpll0_gpll4_map, + .hid_width = 5, + .freq_tbl = ftbl_gmac_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gmac_clk_src", + .parent_data = gcc_xo_gpll0_gpll4, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gp_clk_src[] = { + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr = 0x08004, + .freq_tbl = ftbl_gp_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp1_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp2_clk_src = { + .cmd_rcgr = 0x09004, + .freq_tbl = ftbl_gp_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp2_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp3_clk_src = { + .cmd_rcgr = 0x0a004, + .freq_tbl = ftbl_gp_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp3_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_lpass_axim_clk_src[] = { + F(133333334, P_GPLL0, 6, 0, 0), + { } +}; + +struct clk_rcg2 lpass_axim_clk_src = { + .cmd_rcgr = 0x2E028, + .freq_tbl = ftbl_lpass_axim_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "lpass_axim_clk_src", + .parent_data = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_lpass_sway_clk_src[] = { + F(66666667, P_GPLL0, 12, 0, 0), + { } +}; + +struct clk_rcg2 lpass_sway_clk_src = { + .cmd_rcgr = 0x2E040, + .freq_tbl = ftbl_lpass_sway_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "lpass_sway_clk_src", + .parent_data = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + .flags = CLK_IGNORE_UNUSED, + }, +}; + +static const struct freq_tbl ftbl_pcie0_aux_clk_src[] = { + F(2000000, P_XO, 12, 0, 0), +}; + +static struct clk_rcg2 pcie0_aux_clk_src = { + .cmd_rcgr = 0x75020, + .freq_tbl = ftbl_pcie0_aux_clk_src, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_core_pi_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_aux_clk_src", + .parent_data = gcc_xo_gpll0_core_pi_sleep_clk, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_pcie0_axi_clk_src[] = { + F(240000000, P_GPLL4, 5, 0, 0), + { } +}; + +static struct clk_rcg2 pcie0_axi_clk_src = { + .cmd_rcgr = 0x75050, + .freq_tbl = ftbl_pcie0_axi_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_axi_clk_src", + .parent_data = gcc_xo_gpll0_gpll4, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 pcie1_aux_clk_src = { + .cmd_rcgr = 0x76020, + .freq_tbl = ftbl_pcie0_aux_clk_src, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_core_pi_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_aux_clk_src", + .parent_data = gcc_xo_gpll0_core_pi_sleep_clk, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_rcg2 pcie1_axi_clk_src = { + .cmd_rcgr = 0x76050, + .freq_tbl = ftbl_gp_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_axi_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_mux pcie0_pipe_clk_src = { + .reg = 0x7501c, + .shift = 8, + .width = 2, + .parent_map = gcc_pcie20_phy0_pipe_clk_xo_map, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie0_pipe_clk_src", + .parent_data = gcc_pcie20_phy0_pipe_clk_xo, + .num_parents = 2, + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_regmap_mux pcie1_pipe_clk_src = { + .reg = 0x7601c, + .shift = 8, + .width = 2, + .parent_map = gcc_pcie20_phy1_pipe_clk_xo_map, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie1_pipe_clk_src", + .parent_data = gcc_pcie20_phy1_pipe_clk_xo, + .num_parents = 2, + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static const struct freq_tbl ftbl_pcnoc_bfdcd_clk_src[] = { + F(100000000, P_GPLL0, 8, 0, 0), + { } +}; + +static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr = 0x27000, + .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcnoc_bfdcd_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor pcnoc_clk_src = { + .mult = 1, + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "pcnoc_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_bfdcd_clk_src", + .name = "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_qdss_at_clk_src[] = { + F(240000000, P_GPLL4, 5, 0, 0), + { } +}; + +static struct clk_rcg2 qdss_at_clk_src = { + .cmd_rcgr = 0x2900c, + .freq_tbl = ftbl_qdss_at_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1, + .clkr.hw.init = &(struct clk_init_data){ + .name = "qdss_at_clk_src", + .parent_data = gcc_xo_gpll4_gpll0_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_qdss_stm_clk_src[] = { + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 qdss_stm_clk_src = { + .cmd_rcgr = 0x2902C, + .freq_tbl = ftbl_qdss_stm_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "qdss_stm_clk_src", + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_qdss_traceclkin_clk_src[] = { + F(266666667, P_GPLL0, 3, 0, 0), + { } +}; + +static struct clk_rcg2 qdss_traceclkin_clk_src = { + .cmd_rcgr = 0x29048, + .freq_tbl = ftbl_qdss_traceclkin_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1, + .clkr.hw.init = &(struct clk_init_data){ + .name = "qdss_traceclkin_clk_src", + .parent_data = gcc_xo_gpll4_gpll0_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_qdss_tsctr_clk_src[] = { + F(600000000, P_GPLL4, 2, 0, 0), + { } +}; + +static struct clk_rcg2 qdss_tsctr_clk_src = { + .cmd_rcgr = 0x29064, + .freq_tbl = ftbl_qdss_tsctr_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1, + .clkr.hw.init = &(struct clk_init_data){ + .name = "qdss_tsctr_clk_src", + .parent_data = gcc_xo_gpll4_gpll0_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div2_clk_src = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "qdss_tsctr_div2_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_clk_src", + .name = "qdss_tsctr_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_fixed_factor qdss_dap_sync_clk_src = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "qdss_dap_sync_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_clk_src", + .name = "qdss_tsctr_clk_src", + }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_fixed_factor eud_at_clk_src = { + .mult = 1, + .div = 6, + .hw.init = &(struct clk_init_data){ + .name = "eud_at_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_at_clk_src", + .name = "qdss_at_clk_src", + }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_qpic_io_macro_clk_src[] = { + F(24000000, P_XO, 1, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + F(320000000, P_GPLL0, 2.5, 0, 0), +}; + +static struct clk_rcg2 qpic_io_macro_clk_src = { + .cmd_rcgr = 0x57010, + .freq_tbl = ftbl_qpic_io_macro_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "qpic_io_macro_clk_src", + .parent_data = gcc_xo_gpll0_gpll2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_IGNORE_UNUSED, + }, +}; + +static const struct freq_tbl ftbl_sdcc1_apps_clk_src[] = { + F(143713, P_XO, 1, 1, 167), + F(400000, P_XO, 1, 1, 60), + F(24000000, P_XO, 1, 0, 0), + F(48000000, P_GPLL2, 12, 1, 2), + F(96000000, P_GPLL2, 12, 0, 0), + F(177777778, P_GPLL0, 1, 2, 9), + F(192000000, P_GPLL2, 6, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 sdcc1_apps_clk_src = { + .cmd_rcgr = 0x42004, + .freq_tbl = ftbl_sdcc1_apps_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_apps_clk_src", + .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_system_noc_bfdcd_clk_src[] = { + F(266666667, P_GPLL0, 3, 0, 0), + { } +}; + +static struct clk_rcg2 system_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x26004, + .freq_tbl = ftbl_system_noc_bfdcd_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "system_noc_bfdcd_clk_src", + .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor system_noc_clk_src = { + .mult = 1, + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "system_noc_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_bfdcd_clk_src", + .name = "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_rcg2 ubi0_axi_clk_src = { + .cmd_rcgr = 0x68088, + .freq_tbl = ftbl_apss_axi_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi0_axi_clk_src", + .parent_data = gcc_xo_gpll0_gpll2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_ubi0_core_clk_src[] = { + F(850000000, P_UBI32_PLL, 1, 0, 0), + F(1000000000, P_UBI32_PLL, 1, 0, 0), +}; + +static struct clk_rcg2 ubi0_core_clk_src = { + .cmd_rcgr = 0x68100, + .freq_tbl = ftbl_ubi0_core_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_ubi32_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi0_core_clk_src", + .parent_data = gcc_xo_ubi32_gpll0, + .num_parents = 3, + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static struct clk_rcg2 usb0_aux_clk_src = { + .cmd_rcgr = 0x3e05c, + .freq_tbl = ftbl_pcie0_aux_clk_src, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_core_pi_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_aux_clk_src", + .parent_data = gcc_xo_gpll0_core_pi_sleep_clk, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_usb0_lfps_clk_src[] = { + F(25000000, P_GPLL0, 16, 1, 2), + { } +}; + +static struct clk_rcg2 usb0_lfps_clk_src = { + .cmd_rcgr = 0x3e090, + .freq_tbl = ftbl_usb0_lfps_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_lfps_clk_src", + .parent_data = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 usb0_master_clk_src = { + .cmd_rcgr = 0x3e00c, + .freq_tbl = ftbl_gp_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_master_clk_src", + .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_usb0_mock_utmi_clk_src[] = { + F(60000000, P_GPLL4, 10, 1, 2), + { } +}; + +static struct clk_rcg2 usb0_mock_utmi_clk_src = { + .cmd_rcgr = 0x3e020, + .freq_tbl = ftbl_usb0_mock_utmi_clk_src, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map2, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_mock_utmi_clk_src", + .parent_data = gcc_xo_gpll4_gpll0_gpll0_out_main_div2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_regmap_mux usb0_pipe_clk_src = { + .reg = 0x3e048, + .shift = 8, + .width = 2, + .parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map, + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "usb0_pipe_clk_src", + .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo, + .num_parents = 2, + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static const struct freq_tbl ftbl_q6_axi_clk_src[] = { + F(400000000, P_GPLL0, 2, 0, 0), + { } +}; + +static struct clk_rcg2 q6_axi_clk_src = { + .cmd_rcgr = 0x59120, + .freq_tbl = ftbl_q6_axi_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_gpll4_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "q6_axi_clk_src", + .parent_data = gcc_xo_gpll0_gpll2_gpll4, + .num_parents = 4, + .ops = &clk_rcg2_ops, + .flags = CLK_IGNORE_UNUSED, + }, +}; + +static const struct freq_tbl ftbl_wcss_ahb_clk_src[] = { + F(133333333, P_GPLL0, 6, 0, 0), + { } +}; + +static struct clk_rcg2 wcss_ahb_clk_src = { + .cmd_rcgr = 0x59020, + .freq_tbl = ftbl_wcss_ahb_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "wcss_ahb_clk_src", + .parent_data = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_sleep_clk_src = { + .halt_reg = 0x30000, + .clkr = { + .enable_reg = 0x30000, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sleep_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "sleep_clk", + .name = "sleep_clk", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_IS_CRITICAL, + }, + }, +}; + +static struct clk_branch gcc_xo_clk_src = { + .halt_reg = 0x30018, + .clkr = { + .enable_reg = 0x30018, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_clk_src", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xo", + .name = "xo", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_xo_clk = { + .halt_reg = 0x30030, + .clkr = { + .enable_reg = 0x30030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gcc_xo_clk_src", + .name = "gcc_xo_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_adss_pwm_clk = { + .halt_reg = 0x1f020, + .clkr = { + .enable_reg = 0x1f020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_adss_pwm_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "adss_pwm_clk_src", + .name = "adss_pwm_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_apss_ahb_clk = { + .halt_reg = 0x4601c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(14), + .hw.init = &(struct clk_init_data){ + .name = "gcc_apss_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "apss_ahb_clk_src", + .name = "apss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_apss_axi_clk = { + .halt_reg = 0x46020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_apss_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "apss_axi_clk_src", + .name = "apss_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_ahb_clk = { + .halt_reg = 0x01008, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = { + .halt_reg = 0x02008, + .clkr = { + .enable_reg = 0x02008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_i2c_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup1_i2c_apps_clk_src", + .name = "blsp1_qup1_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = { + .halt_reg = 0x02004, + .clkr = { + .enable_reg = 0x02004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_spi_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup1_spi_apps_clk_src", + .name = "blsp1_qup1_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = { + .halt_reg = 0x03010, + .clkr = { + .enable_reg = 0x03010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_i2c_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup2_i2c_apps_clk_src", + .name = "blsp1_qup2_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = { + .halt_reg = 0x0300c, + .clkr = { + .enable_reg = 0x0300c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_spi_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup2_spi_apps_clk_src", + .name = "blsp1_qup2_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = { + .halt_reg = 0x04010, + .clkr = { + .enable_reg = 0x04010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_i2c_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup3_i2c_apps_clk_src", + .name = "blsp1_qup3_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = { + .halt_reg = 0x0400c, + .clkr = { + .enable_reg = 0x0400c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_spi_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_qup3_spi_apps_clk_src", + .name = "blsp1_qup3_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_uart1_apps_clk = { + .halt_reg = 0x0203c, + .clkr = { + .enable_reg = 0x0203c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart1_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_uart1_apps_clk_src", + .name = "blsp1_uart1_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_uart2_apps_clk = { + .halt_reg = 0x0302c, + .clkr = { + .enable_reg = 0x0302c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart2_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "blsp1_uart2_apps_clk_src", + .name = "blsp1_uart2_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_btss_lpo_clk = { + .halt_reg = 0x1c004, + .clkr = { + .enable_reg = 0x1c004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_btss_lpo_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cmn_blk_ahb_clk = { + .halt_reg = 0x56308, + .clkr = { + .enable_reg = 0x56308, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_blk_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cmn_blk_sys_clk = { + .halt_reg = 0x5630c, + .clkr = { + .enable_reg = 0x5630c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_blk_sys_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gcc_xo_clk_src", + .name = "gcc_xo_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_ahb_clk = { + .halt_reg = 0x16024, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_axi_clk = { + .halt_reg = 0x16020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_clk = { + .halt_reg = 0x1601c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "crypto_clk_src", + .name = "crypto_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_dcc_clk = { + .halt_reg = 0x77004, + .clkr = { + .enable_reg = 0x77004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_dcc_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gephy_rx_clk = { + .halt_reg = 0x56010, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x56010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gephy_rx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_rx_div_clk_src", + .name = "gmac0_rx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gephy_tx_clk = { + .halt_reg = 0x56014, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x56014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gephy_tx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_tx_div_clk_src", + .name = "gmac0_tx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gmac0_cfg_clk = { + .halt_reg = 0x68304, + .clkr = { + .enable_reg = 0x68304, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac0_cfg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac0_ptp_clk = { + .halt_reg = 0x68300, + .clkr = { + .enable_reg = 0x68300, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac0_ptp_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac0_rx_clk = { + .halt_reg = 0x68240, + .clkr = { + .enable_reg = 0x68240, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac0_rx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_rx_div_clk_src", + .name = "gmac0_rx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gmac0_sys_clk = { + .halt_reg = 0x68190, + .halt_check = BRANCH_HALT_DELAY, + .halt_bit = 31, + .clkr = { + .enable_reg = 0x683190, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac0_sys_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac0_tx_clk = { + .halt_reg = 0x68244, + .clkr = { + .enable_reg = 0x68244, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac0_tx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac0_tx_div_clk_src", + .name = "gmac0_tx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gmac1_cfg_clk = { + .halt_reg = 0x68324, + .clkr = { + .enable_reg = 0x68324, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac1_cfg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac1_ptp_clk = { + .halt_reg = 0x68320, + .clkr = { + .enable_reg = 0x68320, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac1_ptp_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac1_rx_clk = { + .halt_reg = 0x68248, + .clkr = { + .enable_reg = 0x68248, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac1_rx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_rx_div_clk_src", + .name = "gmac1_rx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gmac1_sys_clk = { + .halt_reg = 0x68310, + .clkr = { + .enable_reg = 0x68310, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac1_sys_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gmac1_tx_clk = { + .halt_reg = 0x6824c, + .clkr = { + .enable_reg = 0x6824c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gmac1_tx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_tx_div_clk_src", + .name = "gmac1_tx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_gp1_clk = { + .halt_reg = 0x08000, + .clkr = { + .enable_reg = 0x08000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gp1_clk_src", + .name = "gp1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp2_clk = { + .halt_reg = 0x09000, + .clkr = { + .enable_reg = 0x09000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gp2_clk_src", + .name = "gp2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp3_clk = { + .halt_reg = 0x0a000, + .clkr = { + .enable_reg = 0x0a000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gp3_clk_src", + .name = "gp3_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_lpass_core_axim_clk = { + .halt_reg = 0x2E048, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x2E048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_lpass_core_axim_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "lpass_axim_clk_src", + .name = "lpass_axim_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_lpass_sway_clk = { + .halt_reg = 0x2E04C, + .clkr = { + .enable_reg = 0x2E04C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_lpass_sway_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "lpass_sway_clk_src", + .name = "lpass_sway_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdio0_ahb_clk = { + .halt_reg = 0x58004, + .clkr = { + .enable_reg = 0x58004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdioi0_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdio1_ahb_clk = { + .halt_reg = 0x58014, + .clkr = { + .enable_reg = 0x58014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdio1_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_ahb_clk = { + .halt_reg = 0x75010, + .clkr = { + .enable_reg = 0x75010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_aux_clk = { + .halt_reg = 0x75014, + .clkr = { + .enable_reg = 0x75014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_aux_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_aux_clk_src", + .name = "pcie0_aux_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_axi_m_clk = { + .halt_reg = 0x75008, + .clkr = { + .enable_reg = 0x75008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_m_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_axi_clk_src", + .name = "pcie0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_axi_s_bridge_clk = { + .halt_reg = 0x75048, + .clkr = { + .enable_reg = 0x75048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_s_bridge_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_axi_clk_src", + .name = "pcie0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_axi_s_clk = { + .halt_reg = 0x7500c, + .clkr = { + .enable_reg = 0x7500c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_s_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_axi_clk_src", + .name = "pcie0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_pipe_clk = { + .halt_reg = 0x75018, + .halt_check = BRANCH_HALT_DELAY, + .halt_bit = 31, + .clkr = { + .enable_reg = 0x75018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_pipe_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_pipe_clk_src", + .name = "pcie0_pipe_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_ahb_clk = { + .halt_reg = 0x76010, + .clkr = { + .enable_reg = 0x76010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_aux_clk = { + .halt_reg = 0x76014, + .clkr = { + .enable_reg = 0x76014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_aux_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_aux_clk_src", + .name = "pcie1_aux_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_axi_m_clk = { + .halt_reg = 0x76008, + .clkr = { + .enable_reg = 0x76008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_m_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_axi_clk_src", + .name = "pcie1_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_axi_s_bridge_clk = { + .halt_reg = 0x76048, + .clkr = { + .enable_reg = 0x76048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_s_bridge_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_axi_clk_src", + .name = "pcie1_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_axi_s_clk = { + .halt_reg = 0x7600c, + .clkr = { + .enable_reg = 0x7600c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_s_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_axi_clk_src", + .name = "pcie1_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_pipe_clk = { + .halt_reg = 0x76018, + .halt_check = BRANCH_HALT_DELAY, + .halt_bit = 31, + .clkr = { + .enable_reg = 0x76018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_pipe_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_pipe_clk_src", + .name = "pcie1_pipe_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_prng_ahb_clk = { + .halt_reg = 0x13004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x0b004, + .enable_mask = BIT(8), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_ahb_clk = { + .halt_reg = 0x59138, + .clkr = { + .enable_reg = 0x59138, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_ahb_s_clk = { + .halt_reg = 0x5914C, + .clkr = { + .enable_reg = 0x5914C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_ahb_s_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_axim_clk = { + .halt_reg = 0x5913C, + .clkr = { + .enable_reg = 0x5913C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_axim_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "q6_axi_clk_src", + .name = "q6_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_axim2_clk = { + .halt_reg = 0x59150, + .clkr = { + .enable_reg = 0x59150, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_axim2_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "q6_axi_clk_src", + .name = "q6_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_axis_clk = { + .halt_reg = 0x59154, + .clkr = { + .enable_reg = 0x59154, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_axis_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_tsctr_1to2_clk = { + .halt_reg = 0x59148, + .clkr = { + .enable_reg = 0x59148, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6_tsctr_1to2_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_div2_clk_src", + .name = "qdss_tsctr_div2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_atbm_clk = { + .halt_reg = 0x59144, + .clkr = { + .enable_reg = 0x59144, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6ss_atbm_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_at_clk_src", + .name = "qdss_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_pclkdbg_clk = { + .halt_reg = 0x59140, + .clkr = { + .enable_reg = 0x59140, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6ss_pclkdbg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_trig_clk = { + .halt_reg = 0x59128, + .clkr = { + .enable_reg = 0x59128, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_q6ss_trig_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_at_clk = { + .halt_reg = 0x29024, + .clkr = { + .enable_reg = 0x29024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_at_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_at_clk_src", + .name = "qdss_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_dap_clk = { + .halt_reg = 0x29084, + .clkr = { + .enable_reg = 0x29084, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_dap_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_clk_src", + .name = "qdss_tsctr_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_cfg_ahb_clk = { + .halt_reg = 0x29008, + .clkr = { + .enable_reg = 0x29008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_cfg_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_dap_ahb_clk = { + .halt_reg = 0x29004, + .clkr = { + .enable_reg = 0x29004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_dap_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_etr_usb_clk = { + .halt_reg = 0x29028, + .clkr = { + .enable_reg = 0x29028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_etr_usb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_eud_at_clk = { + .halt_reg = 0x29020, + .clkr = { + .enable_reg = 0x29020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_eud_at_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "eud_at_clk_src", + .name = "eud_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_stm_clk = { + .halt_reg = 0x29044, + .clkr = { + .enable_reg = 0x29044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_stm_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_stm_clk_src", + .name = "qdss_stm_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_traceclkin_clk = { + .halt_reg = 0x29060, + .clkr = { + .enable_reg = 0x29060, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_traceclkin_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_traceclkin_clk_src", + .name = "qdss_traceclkin_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div8_clk = { + .halt_reg = 0x2908c, + .clkr = { + .enable_reg = 0x2908c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qdss_tsctr_div8_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_clk_src", + .name = "qdss_tsctr_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qpic_ahb_clk = { + .halt_reg = 0x57024, + .clkr = { + .enable_reg = 0x57024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qpic_clk = { + .halt_reg = 0x57020, + .clkr = { + .enable_reg = 0x57020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qpic_io_macro_clk = { + .halt_reg = 0x5701c, + .clkr = { + .enable_reg = 0x5701c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_io_macro_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qpic_io_macro_clk_src", + .name = "qpic_io_macro_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc1_ahb_clk = { + .halt_reg = 0x4201c, + .clkr = { + .enable_reg = 0x4201c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc1_apps_clk = { + .halt_reg = 0x42018, + .clkr = { + .enable_reg = 0x42018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_apps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "sdcc1_apps_clk_src", + .name = "sdcc1_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_gmac0_ahb_clk = { + .halt_reg = 0x260a0, + .clkr = { + .enable_reg = 0x260a0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_gmac0_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_gmac0_axi_clk = { + .halt_reg = 0x26084, + .clkr = { + .enable_reg = 0x26084, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_gmac0_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_gmac1_ahb_clk = { + .halt_reg = 0x260a4, + .clkr = { + .enable_reg = 0x260a4, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_gmac1_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_gmac1_axi_clk = { + .halt_reg = 0x26088, + .clkr = { + .enable_reg = 0x26088, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_gmac1_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac_clk_src", + .name = "gmac_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_lpass_axim_clk = { + .halt_reg = 0x26074, + .clkr = { + .enable_reg = 0x26074, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_lpass_axim_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "lpass_axim_clk_src", + .name = "lpass_axim_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_lpass_sway_clk = { + .halt_reg = 0x26078, + .clkr = { + .enable_reg = 0x26078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_lpass_sway_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "lpass_sway_clk_src", + .name = "lpass_sway_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_ubi0_axi_clk = { + .halt_reg = 0x26094, + .clkr = { + .enable_reg = 0x26094, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_snoc_ubi0_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "ubi0_axi_clk_src", + .name = "ubi0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_pcie0_axi_clk = { + .halt_reg = 0x26048, + .clkr = { + .enable_reg = 0x26048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie0_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie0_axi_clk_src", + .name = "pcie0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_pcie1_axi_clk = { + .halt_reg = 0x2604c, + .clkr = { + .enable_reg = 0x2604c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie1_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcie1_axi_clk_src", + .name = "pcie1_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_qdss_stm_axi_clk = { + .halt_reg = 0x26024, + .clkr = { + .enable_reg = 0x26024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_qdss_stm_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_stm_clk_src", + .name = "qdss_stm_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_usb0_axi_clk = { + .halt_reg = 0x26040, + .clkr = { + .enable_reg = 0x26040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_usb0_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_master_clk_src", + .name = "usb0_master_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_wcss_ahb_clk = { + .halt_reg = 0x26034, + .clkr = { + .enable_reg = 0x26034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_wcss_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_axi_clk = { + .halt_reg = 0x68200, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68200, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "ubi0_axi_clk_src", + .name = "ubi0_axi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_cfg_clk = { + .halt_reg = 0x68160, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68160, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_cfg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_dbg_clk = { + .halt_reg = 0x68214, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68214, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_dbg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_clk_src", + .name = "qdss_tsctr_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_core_clk = { + .halt_reg = 0x68210, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68210, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_core_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "ubi0_core_clk_src", + .name = "ubi0_core_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_nc_axi_clk = { + .halt_reg = 0x68204, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68204, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_nc_axi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ubi0_utcm_clk = { + .halt_reg = 0x68208, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x68208, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_utcm_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy_ahb_clk = { + .halt_reg = 0x56108, + .clkr = { + .enable_reg = 0x56108, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy_rx_clk = { + .halt_reg = 0x56110, + .clkr = { + .enable_reg = 0x56110, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy_rx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_rx_div_clk_src", + .name = "gmac1_rx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_uniphy_tx_clk = { + .halt_reg = 0x56114, + .clkr = { + .enable_reg = 0x56114, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy_tx_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gmac1_tx_div_clk_src", + .name = "gmac1_tx_div_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }, +}; + +static struct clk_branch gcc_uniphy_sys_clk = { + .halt_reg = 0x5610C, + .clkr = { + .enable_reg = 0x5610C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy_sys_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gcc_xo_clk_src", + .name = "gcc_xo_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_aux_clk = { + .halt_reg = 0x3e044, + .clkr = { + .enable_reg = 0x3e044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_aux_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_aux_clk_src", + .name = "usb0_aux_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_eud_at_clk = { + .halt_reg = 0x3e04c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x3e04c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_eud_at_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "eud_at_clk_src", + .name = "eud_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_lfps_clk = { + .halt_reg = 0x3e050, + .clkr = { + .enable_reg = 0x3e050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_lfps_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_lfps_clk_src", + .name = "usb0_lfps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_master_clk = { + .halt_reg = 0x3e000, + .clkr = { + .enable_reg = 0x3e000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_master_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_master_clk_src", + .name = "usb0_master_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_mock_utmi_clk = { + .halt_reg = 0x3e008, + .clkr = { + .enable_reg = 0x3e008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_mock_utmi_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_mock_utmi_clk_src", + .name = "usb0_mock_utmi_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_phy_cfg_ahb_clk = { + .halt_reg = 0x3e080, + .clkr = { + .enable_reg = 0x3e080, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_phy_cfg_ahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "pcnoc_clk_src", + .name = "pcnoc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_sleep_clk = { + .halt_reg = 0x3e004, + .clkr = { + .enable_reg = 0x3e004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_sleep_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "gcc_sleep_clk_src", + .name = "gcc_sleep_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb0_pipe_clk = { + .halt_reg = 0x3e040, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x3e040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_pipe_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "usb0_pipe_clk_src", + .name = "usb0_pipe_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_acmt_clk = { + .halt_reg = 0x59064, + .clkr = { + .enable_reg = 0x59064, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_acmt_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_ahb_s_clk = { + .halt_reg = 0x59034, + .clkr = { + .enable_reg = 0x59034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_ahb_s_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_axi_m_clk = { + .halt_reg = 0x5903C, + .clkr = { + .enable_reg = 0x5903C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_axi_m_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_axi_s_clk = { + .halt_reg = 0x59068, + .clkr = { + .enable_reg = 0x59068, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_axi_s_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "system_noc_clk_src", + .name = "system_noc_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_apb_bdg_clk = { + .halt_reg = 0x59050, + .clkr = { + .enable_reg = 0x59050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_apb_bdg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_apb_clk = { + .halt_reg = 0x59040, + .clkr = { + .enable_reg = 0x59040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_apb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_atb_bdg_clk = { + .halt_reg = 0x59054, + .clkr = { + .enable_reg = 0x59054, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_atb_bdg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_at_clk_src", + .name = "qdss_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_atb_clk = { + .halt_reg = 0x59044, + .clkr = { + .enable_reg = 0x59044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_atb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_at_clk_src", + .name = "qdss_at_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_dapbus_bdg_clk = { + .halt_reg = 0x59060, + .clkr = { + .enable_reg = 0x59060, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_dapbus_bdg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_dapbus_clk = { + .halt_reg = 0x5905C, + .clkr = { + .enable_reg = 0x5905C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_dapbus_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_dap_sync_clk_src", + .name = "qdss_dap_sync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_nts_bdg_clk = { + .halt_reg = 0x59058, + .clkr = { + .enable_reg = 0x59058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_nts_bdg_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_div2_clk_src", + .name = "qdss_tsctr_div2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_nts_clk = { + .halt_reg = 0x59048, + .clkr = { + .enable_reg = 0x59048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_dbg_ifc_nts_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "qdss_tsctr_div2_clk_src", + .name = "qdss_tsctr_div2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_ecahb_clk = { + .halt_reg = 0x59038, + .clkr = { + .enable_reg = 0x59038, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_wcss_ecahb_clk", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "wcss_ahb_clk_src", + .name = "wcss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_hw *gcc_ipq5018_hws[] = { + &gpll0_out_main_div2.hw, + &pcnoc_clk_src.hw, + &system_noc_clk_src.hw, + &qdss_dap_sync_clk_src.hw, + &qdss_tsctr_div2_clk_src.hw, + &eud_at_clk_src.hw, +}; + +static const struct alpha_pll_config ubi32_pll_config = { + .l = 0x29, + .alpha = 0xAAAAAAAA, + .alpha_hi = 0xAA, + .config_ctl_val = 0x4001075b, + .main_output_mask = BIT(0), + .aux_output_mask = BIT(1), + .alpha_en_mask = BIT(24), + .vco_val = 0x1, + .vco_mask = GENMASK(21, 20), + .test_ctl_val = 0x0, + .test_ctl_hi_val = 0x0, +}; + +static struct clk_regmap *gcc_ipq5018_clks[] = { + [GPLL0_MAIN] = &gpll0_main.clkr, + [GPLL0] = &gpll0.clkr, + [GPLL2_MAIN] = &gpll2_main.clkr, + [GPLL2] = &gpll2.clkr, + [GPLL4_MAIN] = &gpll4_main.clkr, + [GPLL4] = &gpll4.clkr, + [UBI32_PLL_MAIN] = &ubi32_pll_main.clkr, + [UBI32_PLL] = &ubi32_pll.clkr, + [ADSS_PWM_CLK_SRC] = &adss_pwm_clk_src.clkr, + [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr, + [APSS_AHB_POSTDIV_CLK_SRC] = &apss_ahb_postdiv_clk_src.clkr, + [APSS_AXI_CLK_SRC] = &apss_axi_clk_src.clkr, + [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr, + [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr, + [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr, + [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr, + [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr, + [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr, + [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr, + [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr, + [CRYPTO_CLK_SRC] = &crypto_clk_src.clkr, + [GCC_ADSS_PWM_CLK] = &gcc_adss_pwm_clk.clkr, + [GCC_APSS_AHB_CLK] = &gcc_apss_ahb_clk.clkr, + [GCC_APSS_AXI_CLK] = &gcc_apss_axi_clk.clkr, + [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr, + [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr, + [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr, + [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr, + [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr, + [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr, + [GCC_BTSS_LPO_CLK] = &gcc_btss_lpo_clk.clkr, + [GCC_CMN_BLK_AHB_CLK] = &gcc_cmn_blk_ahb_clk.clkr, + [GCC_CMN_BLK_SYS_CLK] = &gcc_cmn_blk_sys_clk.clkr, + [GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr, + [GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr, + [GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr, + [GCC_DCC_CLK] = &gcc_dcc_clk.clkr, + [GCC_GEPHY_RX_CLK] = &gcc_gephy_rx_clk.clkr, + [GCC_GEPHY_TX_CLK] = &gcc_gephy_tx_clk.clkr, + [GCC_GMAC0_CFG_CLK] = &gcc_gmac0_cfg_clk.clkr, + [GCC_GMAC0_PTP_CLK] = &gcc_gmac0_ptp_clk.clkr, + [GCC_GMAC0_RX_CLK] = &gcc_gmac0_rx_clk.clkr, + [GCC_GMAC0_SYS_CLK] = &gcc_gmac0_sys_clk.clkr, + [GCC_GMAC0_TX_CLK] = &gcc_gmac0_tx_clk.clkr, + [GCC_GMAC1_CFG_CLK] = &gcc_gmac1_cfg_clk.clkr, + [GCC_GMAC1_PTP_CLK] = &gcc_gmac1_ptp_clk.clkr, + [GCC_GMAC1_RX_CLK] = &gcc_gmac1_rx_clk.clkr, + [GCC_GMAC1_SYS_CLK] = &gcc_gmac1_sys_clk.clkr, + [GCC_GMAC1_TX_CLK] = &gcc_gmac1_tx_clk.clkr, + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_LPASS_CORE_AXIM_CLK] = &gcc_lpass_core_axim_clk.clkr, + [GCC_LPASS_SWAY_CLK] = &gcc_lpass_sway_clk.clkr, + [GCC_MDIO0_AHB_CLK] = &gcc_mdio0_ahb_clk.clkr, + [GCC_MDIO1_AHB_CLK] = &gcc_mdio1_ahb_clk.clkr, + [GCC_PCIE0_AHB_CLK] = &gcc_pcie0_ahb_clk.clkr, + [GCC_PCIE0_AUX_CLK] = &gcc_pcie0_aux_clk.clkr, + [GCC_PCIE0_AXI_M_CLK] = &gcc_pcie0_axi_m_clk.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr, + [GCC_PCIE0_AXI_S_CLK] = &gcc_pcie0_axi_s_clk.clkr, + [GCC_PCIE1_AHB_CLK] = &gcc_pcie1_ahb_clk.clkr, + [GCC_PCIE1_AUX_CLK] = &gcc_pcie1_aux_clk.clkr, + [GCC_PCIE1_AXI_M_CLK] = &gcc_pcie1_axi_m_clk.clkr, + [GCC_PCIE1_AXI_S_BRIDGE_CLK] = &gcc_pcie1_axi_s_bridge_clk.clkr, + [GCC_PCIE1_AXI_S_CLK] = &gcc_pcie1_axi_s_clk.clkr, + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + [GCC_Q6_AXIM_CLK] = &gcc_q6_axim_clk.clkr, + [GCC_Q6_AXIM2_CLK] = &gcc_q6_axim2_clk.clkr, + [GCC_Q6_AXIS_CLK] = &gcc_q6_axis_clk.clkr, + [GCC_Q6_AHB_CLK] = &gcc_q6_ahb_clk.clkr, + [GCC_Q6_AHB_S_CLK] = &gcc_q6_ahb_s_clk.clkr, + [GCC_Q6_TSCTR_1TO2_CLK] = &gcc_q6_tsctr_1to2_clk.clkr, + [GCC_Q6SS_ATBM_CLK] = &gcc_q6ss_atbm_clk.clkr, + [GCC_Q6SS_PCLKDBG_CLK] = &gcc_q6ss_pclkdbg_clk.clkr, + [GCC_Q6SS_TRIG_CLK] = &gcc_q6ss_trig_clk.clkr, + [GCC_QDSS_AT_CLK] = &gcc_qdss_at_clk.clkr, + [GCC_QDSS_CFG_AHB_CLK] = &gcc_qdss_cfg_ahb_clk.clkr, + [GCC_QDSS_DAP_AHB_CLK] = &gcc_qdss_dap_ahb_clk.clkr, + [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr, + [GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr, + [GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr, + [GCC_QDSS_STM_CLK] = &gcc_qdss_stm_clk.clkr, + [GCC_QDSS_TRACECLKIN_CLK] = &gcc_qdss_traceclkin_clk.clkr, + [GCC_QDSS_TSCTR_DIV8_CLK] = &gcc_qdss_tsctr_div8_clk.clkr, + [GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr, + [GCC_QPIC_CLK] = &gcc_qpic_clk.clkr, + [GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr, + [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr, + [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr, + [GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr, + [GCC_SNOC_GMAC0_AHB_CLK] = &gcc_snoc_gmac0_ahb_clk.clkr, + [GCC_SNOC_GMAC0_AXI_CLK] = &gcc_snoc_gmac0_axi_clk.clkr, + [GCC_SNOC_GMAC1_AHB_CLK] = &gcc_snoc_gmac1_ahb_clk.clkr, + [GCC_SNOC_GMAC1_AXI_CLK] = &gcc_snoc_gmac1_axi_clk.clkr, + [GCC_SNOC_LPASS_AXIM_CLK] = &gcc_snoc_lpass_axim_clk.clkr, + [GCC_SNOC_LPASS_SWAY_CLK] = &gcc_snoc_lpass_sway_clk.clkr, + [GCC_SNOC_UBI0_AXI_CLK] = &gcc_snoc_ubi0_axi_clk.clkr, + [GCC_SYS_NOC_PCIE0_AXI_CLK] = &gcc_sys_noc_pcie0_axi_clk.clkr, + [GCC_SYS_NOC_PCIE1_AXI_CLK] = &gcc_sys_noc_pcie1_axi_clk.clkr, + [GCC_SYS_NOC_QDSS_STM_AXI_CLK] = &gcc_sys_noc_qdss_stm_axi_clk.clkr, + [GCC_SYS_NOC_USB0_AXI_CLK] = &gcc_sys_noc_usb0_axi_clk.clkr, + [GCC_SYS_NOC_WCSS_AHB_CLK] = &gcc_sys_noc_wcss_ahb_clk.clkr, + [GCC_UBI0_AXI_CLK] = &gcc_ubi0_axi_clk.clkr, + [GCC_UBI0_CFG_CLK] = &gcc_ubi0_cfg_clk.clkr, + [GCC_UBI0_CORE_CLK] = &gcc_ubi0_core_clk.clkr, + [GCC_UBI0_DBG_CLK] = &gcc_ubi0_dbg_clk.clkr, + [GCC_UBI0_NC_AXI_CLK] = &gcc_ubi0_nc_axi_clk.clkr, + [GCC_UBI0_UTCM_CLK] = &gcc_ubi0_utcm_clk.clkr, + [GCC_UNIPHY_AHB_CLK] = &gcc_uniphy_ahb_clk.clkr, + [GCC_UNIPHY_RX_CLK] = &gcc_uniphy_rx_clk.clkr, + [GCC_UNIPHY_SYS_CLK] = &gcc_uniphy_sys_clk.clkr, + [GCC_UNIPHY_TX_CLK] = &gcc_uniphy_tx_clk.clkr, + [GCC_USB0_AUX_CLK] = &gcc_usb0_aux_clk.clkr, + [GCC_USB0_EUD_AT_CLK] = &gcc_usb0_eud_at_clk.clkr, + [GCC_USB0_LFPS_CLK] = &gcc_usb0_lfps_clk.clkr, + [GCC_USB0_MASTER_CLK] = &gcc_usb0_master_clk.clkr, + [GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr, + [GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr, + [GCC_USB0_SLEEP_CLK] = &gcc_usb0_sleep_clk.clkr, + [GCC_WCSS_ACMT_CLK] = &gcc_wcss_acmt_clk.clkr, + [GCC_WCSS_AHB_S_CLK] = &gcc_wcss_ahb_s_clk.clkr, + [GCC_WCSS_AXI_M_CLK] = &gcc_wcss_axi_m_clk.clkr, + [GCC_WCSS_AXI_S_CLK] = &gcc_wcss_axi_s_clk.clkr, + [GCC_WCSS_DBG_IFC_APB_BDG_CLK] = &gcc_wcss_dbg_ifc_apb_bdg_clk.clkr, + [GCC_WCSS_DBG_IFC_APB_CLK] = &gcc_wcss_dbg_ifc_apb_clk.clkr, + [GCC_WCSS_DBG_IFC_ATB_BDG_CLK] = &gcc_wcss_dbg_ifc_atb_bdg_clk.clkr, + [GCC_WCSS_DBG_IFC_ATB_CLK] = &gcc_wcss_dbg_ifc_atb_clk.clkr, + [GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK] = &gcc_wcss_dbg_ifc_dapbus_bdg_clk.clkr, + [GCC_WCSS_DBG_IFC_DAPBUS_CLK] = &gcc_wcss_dbg_ifc_dapbus_clk.clkr, + [GCC_WCSS_DBG_IFC_NTS_BDG_CLK] = &gcc_wcss_dbg_ifc_nts_bdg_clk.clkr, + [GCC_WCSS_DBG_IFC_NTS_CLK] = &gcc_wcss_dbg_ifc_nts_clk.clkr, + [GCC_WCSS_ECAHB_CLK] = &gcc_wcss_ecahb_clk.clkr, + [GCC_XO_CLK] = &gcc_xo_clk.clkr, + [GCC_XO_CLK_SRC] = &gcc_xo_clk_src.clkr, + [GMAC0_RX_CLK_SRC] = &gmac0_rx_clk_src.clkr, + [GMAC0_RX_DIV_CLK_SRC] = &gmac0_rx_div_clk_src.clkr, + [GMAC0_TX_CLK_SRC] = &gmac0_tx_clk_src.clkr, + [GMAC0_TX_DIV_CLK_SRC] = &gmac0_tx_div_clk_src.clkr, + [GMAC1_RX_CLK_SRC] = &gmac1_rx_clk_src.clkr, + [GMAC1_RX_DIV_CLK_SRC] = &gmac1_rx_div_clk_src.clkr, + [GMAC1_TX_CLK_SRC] = &gmac1_tx_clk_src.clkr, + [GMAC1_TX_DIV_CLK_SRC] = &gmac1_tx_div_clk_src.clkr, + [GMAC_CLK_SRC] = &gmac_clk_src.clkr, + [GP1_CLK_SRC] = &gp1_clk_src.clkr, + [GP2_CLK_SRC] = &gp2_clk_src.clkr, + [GP3_CLK_SRC] = &gp3_clk_src.clkr, + [LPASS_AXIM_CLK_SRC] = &lpass_axim_clk_src.clkr, + [LPASS_SWAY_CLK_SRC] = &lpass_sway_clk_src.clkr, + [PCIE0_AUX_CLK_SRC] = &pcie0_aux_clk_src.clkr, + [PCIE0_AXI_CLK_SRC] = &pcie0_axi_clk_src.clkr, + [PCIE1_AUX_CLK_SRC] = &pcie1_aux_clk_src.clkr, + [PCIE1_AXI_CLK_SRC] = &pcie1_axi_clk_src.clkr, + [PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr, + [Q6_AXI_CLK_SRC] = &q6_axi_clk_src.clkr, + [QDSS_AT_CLK_SRC] = &qdss_at_clk_src.clkr, + [QDSS_STM_CLK_SRC] = &qdss_stm_clk_src.clkr, + [QDSS_TSCTR_CLK_SRC] = &qdss_tsctr_clk_src.clkr, + [QDSS_TRACECLKIN_CLK_SRC] = &qdss_traceclkin_clk_src.clkr, + [QPIC_IO_MACRO_CLK_SRC] = &qpic_io_macro_clk_src.clkr, + [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr, + [SYSTEM_NOC_BFDCD_CLK_SRC] = &system_noc_bfdcd_clk_src.clkr, + [UBI0_AXI_CLK_SRC] = &ubi0_axi_clk_src.clkr, + [UBI0_CORE_CLK_SRC] = &ubi0_core_clk_src.clkr, + [USB0_AUX_CLK_SRC] = &usb0_aux_clk_src.clkr, + [USB0_LFPS_CLK_SRC] = &usb0_lfps_clk_src.clkr, + [USB0_MASTER_CLK_SRC] = &usb0_master_clk_src.clkr, + [USB0_MOCK_UTMI_CLK_SRC] = &usb0_mock_utmi_clk_src.clkr, + [WCSS_AHB_CLK_SRC] = &wcss_ahb_clk_src.clkr, + [PCIE0_PIPE_CLK_SRC] = &pcie0_pipe_clk_src.clkr, + [PCIE1_PIPE_CLK_SRC] = &pcie1_pipe_clk_src.clkr, + [GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr, + [GCC_PCIE1_PIPE_CLK] = &gcc_pcie1_pipe_clk.clkr, + [USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr, + [GCC_USB0_PIPE_CLK] = &gcc_usb0_pipe_clk.clkr, +}; + +static const struct qcom_reset_map gcc_ipq5018_resets[] = { + [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR] = { 0x78000, 0 }, + [GCC_BLSP1_BCR] = { 0x01000, 0 }, + [GCC_BLSP1_QUP1_BCR] = { 0x02000, 0 }, + [GCC_BLSP1_QUP2_BCR] = { 0x03008, 0 }, + [GCC_BLSP1_QUP3_BCR] = { 0x04008, 0 }, + [GCC_BLSP1_UART1_BCR] = { 0x02038, 0 }, + [GCC_BLSP1_UART2_BCR] = { 0x03028, 0 }, + [GCC_BOOT_ROM_BCR] = { 0x13008, 0 }, + [GCC_BTSS_BCR] = { 0x1c000, 0 }, + [GCC_CMN_BLK_BCR] = { 0x56300, 0 }, + [GCC_CMN_LDO_BCR] = { 0x33000, 0 }, + [GCC_CE_BCR] = { 0x33014, 0 }, + [GCC_CRYPTO_BCR] = { 0x16000, 0 }, + [GCC_DCC_BCR] = { 0x77000, 0 }, + [GCC_DCD_BCR] = { 0x2a000, 0 }, + [GCC_DDRSS_BCR] = { 0x1e000, 0 }, + [GCC_EDPD_BCR] = { 0x3a000, 0 }, + [GCC_GEPHY_BCR] = { 0x56000, 0 }, + [GCC_GEPHY_MDC_SW_ARES] = { 0x56004, 0 }, + [GCC_GEPHY_DSP_HW_ARES] = { 0x56004, 1 }, + [GCC_GEPHY_RX_ARES] = { 0x56004, 2 }, + [GCC_GEPHY_TX_ARES] = { 0x56004, 3 }, + [GCC_GMAC0_BCR] = { 0x19000, 0 }, + [GCC_GMAC0_CFG_ARES] = { 0x68428, 0 }, + [GCC_GMAC0_SYS_ARES] = { 0x68428, 1 }, + [GCC_GMAC1_BCR] = { 0x19100, 0 }, + [GCC_GMAC1_CFG_ARES] = { 0x68438, 0 }, + [GCC_GMAC1_SYS_ARES] = { 0x68438, 1 }, + [GCC_IMEM_BCR] = { 0x0e000, 0 }, + [GCC_LPASS_BCR] = { 0x2e000, 0 }, + [GCC_MDIO0_BCR] = { 0x58000, 0 }, + [GCC_MDIO1_BCR] = { 0x58010, 0 }, + [GCC_MPM_BCR] = { 0x2c000, 0 }, + [GCC_PCIE0_BCR] = { 0x75004, 0 }, + [GCC_PCIE0_LINK_DOWN_BCR] = { 0x750a8, 0 }, + [GCC_PCIE0_PHY_BCR] = { 0x75038, 0 }, + [GCC_PCIE0PHY_PHY_BCR] = { 0x7503c, 0 }, + [GCC_PCIE0_PIPE_ARES] = { 0x75040, 0 }, + [GCC_PCIE0_SLEEP_ARES] = { 0x75040, 1 }, + [GCC_PCIE0_CORE_STICKY_ARES] = { 0x75040, 2 }, + [GCC_PCIE0_AXI_MASTER_ARES] = { 0x75040, 3 }, + [GCC_PCIE0_AXI_SLAVE_ARES] = { 0x75040, 4 }, + [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 }, + [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 }, + [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 }, + [GCC_PCIE1_BCR] = { 0x76004, 0 }, + [GCC_PCIE1_LINK_DOWN_BCR] = { 0x76044, 0 }, + [GCC_PCIE1_PHY_BCR] = { 0x76038, 0 }, + [GCC_PCIE1PHY_PHY_BCR] = { 0x7603c, 0 }, + [GCC_PCIE1_PIPE_ARES] = { 0x76040, 0 }, + [GCC_PCIE1_SLEEP_ARES] = { 0x76040, 1 }, + [GCC_PCIE1_CORE_STICKY_ARES] = { 0x76040, 2 }, + [GCC_PCIE1_AXI_MASTER_ARES] = { 0x76040, 3 }, + [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 }, + [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 }, + [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, + [GCC_PCIE1_AXI_SLAVE_STICKY_ARES] = { 0x76040, 7 }, + [GCC_PCNOC_BCR] = { 0x27018, 0 }, + [GCC_PCNOC_BUS_TIMEOUT0_BCR] = { 0x48000, 0 }, + [GCC_PCNOC_BUS_TIMEOUT1_BCR] = { 0x48008, 0 }, + [GCC_PCNOC_BUS_TIMEOUT2_BCR] = { 0x48010, 0 }, + [GCC_PCNOC_BUS_TIMEOUT3_BCR] = { 0x48018, 0 }, + [GCC_PCNOC_BUS_TIMEOUT4_BCR] = { 0x48020, 0 }, + [GCC_PCNOC_BUS_TIMEOUT5_BCR] = { 0x48028, 0 }, + [GCC_PCNOC_BUS_TIMEOUT6_BCR] = { 0x48030, 0 }, + [GCC_PCNOC_BUS_TIMEOUT7_BCR] = { 0x48038, 0 }, + [GCC_PCNOC_BUS_TIMEOUT8_BCR] = { 0x48040, 0 }, + [GCC_PCNOC_BUS_TIMEOUT9_BCR] = { 0x48048, 0 }, + [GCC_PCNOC_BUS_TIMEOUT10_BCR] = { 0x48050, 0 }, + [GCC_PCNOC_BUS_TIMEOUT11_BCR] = { 0x48058, 0 }, + [GCC_PRNG_BCR] = { 0x13000, 0 }, + [GCC_Q6SS_DBG_ARES] = { 0x59110, 0 }, + [GCC_Q6_AHB_S_ARES] = { 0x59110, 1 }, + [GCC_Q6_AHB_ARES] = { 0x59110, 2 }, + [GCC_Q6_AXIM2_ARES] = { 0x59110, 3 }, + [GCC_Q6_AXIM_ARES] = { 0x59110, 4 }, + [GCC_Q6_AXIS_ARES] = { 0x59158, 0 }, + [GCC_QDSS_BCR] = { 0x29000, 0 }, + [GCC_QPIC_BCR] = { 0x57018, 0 }, + [GCC_QUSB2_0_PHY_BCR] = { 0x41030, 0 }, + [GCC_SDCC1_BCR] = { 0x42000, 0 }, + [GCC_SEC_CTRL_BCR] = { 0x1a000, 0 }, + [GCC_SPDM_BCR] = { 0x2f000, 0 }, + [GCC_SYSTEM_NOC_BCR] = { 0x26000, 0 }, + [GCC_TCSR_BCR] = { 0x28000, 0 }, + [GCC_TLMM_BCR] = { 0x34000, 0 }, + [GCC_UBI0_AXI_ARES] = { 0x68010, 0 }, + [GCC_UBI0_AHB_ARES] = { 0x68010, 1 }, + [GCC_UBI0_NC_AXI_ARES] = { 0x68010, 2 }, + [GCC_UBI0_DBG_ARES] = { 0x68010, 3 }, + [GCC_UBI0_UTCM_ARES] = { 0x68010, 6 }, + [GCC_UBI0_CORE_ARES] = { 0x68010, 7 }, + [GCC_UBI32_BCR] = { 0x19064, 0 }, + [GCC_UNIPHY_BCR] = { 0x56100, 0 }, + [GCC_UNIPHY_AHB_ARES] = { 0x56104, 0 }, + [GCC_UNIPHY_SYS_ARES] = { 0x56104, 1 }, + [GCC_UNIPHY_RX_ARES] = { 0x56104, 4 }, + [GCC_UNIPHY_TX_ARES] = { 0x56104, 5 }, + [GCC_UNIPHY_SOFT_RESET] = {0x56104, 0 }, + [GCC_USB0_BCR] = { 0x3e070, 0 }, + [GCC_USB0_PHY_BCR] = { 0x3e034, 0 }, + [GCC_WCSS_BCR] = { 0x18000, 0 }, + [GCC_WCSS_DBG_ARES] = { 0x59008, 0 }, + [GCC_WCSS_ECAHB_ARES] = { 0x59008, 1 }, + [GCC_WCSS_ACMT_ARES] = { 0x59008, 2 }, + [GCC_WCSS_DBG_BDG_ARES] = { 0x59008, 3 }, + [GCC_WCSS_AHB_S_ARES] = { 0x59008, 4 }, + [GCC_WCSS_AXI_M_ARES] = { 0x59008, 5 }, + [GCC_WCSS_AXI_S_ARES] = { 0x59008, 6 }, + [GCC_WCSS_Q6_BCR] = { 0x18004, 0 }, + [GCC_WCSSAON_RESET] = { 0x59010, 0}, + [GCC_GEPHY_MISC_ARES] = { 0x56004, 0 }, +}; + +static const struct of_device_id gcc_ipq5018_match_table[] = { + { .compatible = "qcom,gcc-ipq5018" }, + { } +}; +MODULE_DEVICE_TABLE(of, gcc_ipq5018_match_table); + +static const struct regmap_config gcc_ipq5018_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x7fffc, + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_ipq5018_desc = { + .config = &gcc_ipq5018_regmap_config, + .clks = gcc_ipq5018_clks, + .num_clks = ARRAY_SIZE(gcc_ipq5018_clks), + .resets = gcc_ipq5018_resets, + .num_resets = ARRAY_SIZE(gcc_ipq5018_resets), + .clk_hws = gcc_ipq5018_hws, + .num_clk_hws = ARRAY_SIZE(gcc_ipq5018_hws), +}; + +static int gcc_ipq5018_probe(struct platform_device *pdev) +{ + int ret; + struct regmap *regmap; + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc; + + regmap = qcom_cc_map(pdev, &ipq5018_desc); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config); + + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap); + if (ret) { + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n"); + return ret; + } + + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider"); + + return ret; +} + +static struct platform_driver gcc_ipq5018_driver = { + .probe = gcc_ipq5018_probe, + .driver = { + .name = "qcom,gcc-ipq5018", + .owner = THIS_MODULE, + .of_match_table = gcc_ipq5018_match_table, + }, +}; + +static int __init gcc_ipq5018_init(void) +{ + return platform_driver_register(&gcc_ipq5018_driver); +} +core_initcall(gcc_ipq5018_init); + +static void __exit gcc_ipq5018_exit(void) +{ + platform_driver_unregister(&gcc_ipq5018_driver); +} +module_exit(gcc_ipq5018_exit); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ5018 Driver"); +MODULE_LICENSE("GPL v2"); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-21 16:11 ` [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Sricharan R @ 2022-06-22 15:08 ` Krzysztof Kozlowski 2022-06-24 4:05 ` Bjorn Andersson 2022-06-28 1:28 ` kernel test robot 2 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:08 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add support for the global clock controller found on IPQ5018 > based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Thank you for your patch. There is something to discuss/improve. > --- > drivers/clk/qcom/Kconfig | 7 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++ > 3 files changed, 4003 insertions(+) > create mode 100644 drivers/clk/qcom/gcc-ipq5018.c > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > index d01436be6d7a..294fb975db85 100644 > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -172,6 +172,13 @@ config IPQ_GCC_8074 > i2c, USB, SD/eMMC, etc. Select this for the root clock > of ipq8074. > > +config IPQ_GCC_5018 > + tristate "IPQ5018 Global Clock Controller" > + help > + Support for global clock controller on ipq5018 devices. > + Say Y if you want to use peripheral devices such as UART, SPI, > + i2c, USB, SD/eMMC, etc. > + > config MSM_GCC_8660 > tristate "MSM8660 Global Clock Controller" > help > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile > index 671cf5821af1..33ab4ce9b863 100644 > --- a/drivers/clk/qcom/Makefile > +++ b/drivers/clk/qcom/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o > obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o > obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o > obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o > +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o > obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o > obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o > obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o (...) > + > +static int gcc_ipq5018_probe(struct platform_device *pdev) > +{ > + int ret; > + struct regmap *regmap; > + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc; > + > + regmap = qcom_cc_map(pdev, &ipq5018_desc); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config); > + > + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap); return qcom_cc_really_probe(....) > + if (ret) { > + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n"); > + return ret; > + } > + > + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider"); No probe success messages. This pollutes the log and there is other infrastructure to check for successful probe. > + > + return ret; > +} > + > +static struct platform_driver gcc_ipq5018_driver = { > + .probe = gcc_ipq5018_probe, > + .driver = { > + .name = "qcom,gcc-ipq5018", > + .owner = THIS_MODULE, No need for owner. > + .of_match_table = gcc_ipq5018_match_table, > + }, > +}; > + > +static int __init gcc_ipq5018_init(void) > +{ > + return platform_driver_register(&gcc_ipq5018_driver); > +} > +core_initcall(gcc_ipq5018_init); > + > +static void __exit gcc_ipq5018_exit(void) > +{ > + platform_driver_unregister(&gcc_ipq5018_driver); > +} > +module_exit(gcc_ipq5018_exit); > + > +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ5018 Driver"); > +MODULE_LICENSE("GPL v2"); Best regards, Krzysztof ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 @ 2022-06-22 15:08 ` Krzysztof Kozlowski 0 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:08 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add support for the global clock controller found on IPQ5018 > based devices. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Thank you for your patch. There is something to discuss/improve. > --- > drivers/clk/qcom/Kconfig | 7 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++ > 3 files changed, 4003 insertions(+) > create mode 100644 drivers/clk/qcom/gcc-ipq5018.c > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > index d01436be6d7a..294fb975db85 100644 > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -172,6 +172,13 @@ config IPQ_GCC_8074 > i2c, USB, SD/eMMC, etc. Select this for the root clock > of ipq8074. > > +config IPQ_GCC_5018 > + tristate "IPQ5018 Global Clock Controller" > + help > + Support for global clock controller on ipq5018 devices. > + Say Y if you want to use peripheral devices such as UART, SPI, > + i2c, USB, SD/eMMC, etc. > + > config MSM_GCC_8660 > tristate "MSM8660 Global Clock Controller" > help > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile > index 671cf5821af1..33ab4ce9b863 100644 > --- a/drivers/clk/qcom/Makefile > +++ b/drivers/clk/qcom/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o > obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o > obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o > obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o > +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o > obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o > obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o > obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o (...) > + > +static int gcc_ipq5018_probe(struct platform_device *pdev) > +{ > + int ret; > + struct regmap *regmap; > + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc; > + > + regmap = qcom_cc_map(pdev, &ipq5018_desc); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config); > + > + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap); return qcom_cc_really_probe(....) > + if (ret) { > + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n"); > + return ret; > + } > + > + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider"); No probe success messages. This pollutes the log and there is other infrastructure to check for successful probe. > + > + return ret; > +} > + > +static struct platform_driver gcc_ipq5018_driver = { > + .probe = gcc_ipq5018_probe, > + .driver = { > + .name = "qcom,gcc-ipq5018", > + .owner = THIS_MODULE, No need for owner. > + .of_match_table = gcc_ipq5018_match_table, > + }, > +}; > + > +static int __init gcc_ipq5018_init(void) > +{ > + return platform_driver_register(&gcc_ipq5018_driver); > +} > +core_initcall(gcc_ipq5018_init); > + > +static void __exit gcc_ipq5018_exit(void) > +{ > + platform_driver_unregister(&gcc_ipq5018_driver); > +} > +module_exit(gcc_ipq5018_exit); > + > +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ5018 Driver"); > +MODULE_LICENSE("GPL v2"); Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-22 15:08 ` Krzysztof Kozlowski @ 2022-06-23 6:06 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:06 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:38 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add support for the global clock controller found on IPQ5018 >> based devices. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Thank you for your patch. There is something to discuss/improve. > >> --- >> drivers/clk/qcom/Kconfig | 7 + >> drivers/clk/qcom/Makefile | 1 + >> drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++ >> 3 files changed, 4003 insertions(+) >> create mode 100644 drivers/clk/qcom/gcc-ipq5018.c >> >> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig >> index d01436be6d7a..294fb975db85 100644 >> --- a/drivers/clk/qcom/Kconfig >> +++ b/drivers/clk/qcom/Kconfig >> @@ -172,6 +172,13 @@ config IPQ_GCC_8074 >> i2c, USB, SD/eMMC, etc. Select this for the root clock >> of ipq8074. >> >> +config IPQ_GCC_5018 >> + tristate "IPQ5018 Global Clock Controller" >> + help >> + Support for global clock controller on ipq5018 devices. >> + Say Y if you want to use peripheral devices such as UART, SPI, >> + i2c, USB, SD/eMMC, etc. >> + >> config MSM_GCC_8660 >> tristate "MSM8660 Global Clock Controller" >> help >> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile >> index 671cf5821af1..33ab4ce9b863 100644 >> --- a/drivers/clk/qcom/Makefile >> +++ b/drivers/clk/qcom/Makefile >> @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o >> obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o >> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o >> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o >> +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o >> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o >> obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o >> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o > (...) > >> + >> +static int gcc_ipq5018_probe(struct platform_device *pdev) >> +{ >> + int ret; >> + struct regmap *regmap; >> + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc; >> + >> + regmap = qcom_cc_map(pdev, &ipq5018_desc); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + >> + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config); >> + >> + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap); > return qcom_cc_really_probe(....) ok. >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n"); >> + return ret; >> + } >> + >> + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider"); > No probe success messages. This pollutes the log and there is other > infrastructure to check for successful probe. ok. >> + >> + return ret; >> +} >> + >> +static struct platform_driver gcc_ipq5018_driver = { >> + .probe = gcc_ipq5018_probe, >> + .driver = { >> + .name = "qcom,gcc-ipq5018", >> + .owner = THIS_MODULE, > No need for owner. ok. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 @ 2022-06-23 6:06 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:06 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:38 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add support for the global clock controller found on IPQ5018 >> based devices. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Thank you for your patch. There is something to discuss/improve. > >> --- >> drivers/clk/qcom/Kconfig | 7 + >> drivers/clk/qcom/Makefile | 1 + >> drivers/clk/qcom/gcc-ipq5018.c | 3995 ++++++++++++++++++++++++++++++++ >> 3 files changed, 4003 insertions(+) >> create mode 100644 drivers/clk/qcom/gcc-ipq5018.c >> >> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig >> index d01436be6d7a..294fb975db85 100644 >> --- a/drivers/clk/qcom/Kconfig >> +++ b/drivers/clk/qcom/Kconfig >> @@ -172,6 +172,13 @@ config IPQ_GCC_8074 >> i2c, USB, SD/eMMC, etc. Select this for the root clock >> of ipq8074. >> >> +config IPQ_GCC_5018 >> + tristate "IPQ5018 Global Clock Controller" >> + help >> + Support for global clock controller on ipq5018 devices. >> + Say Y if you want to use peripheral devices such as UART, SPI, >> + i2c, USB, SD/eMMC, etc. >> + >> config MSM_GCC_8660 >> tristate "MSM8660 Global Clock Controller" >> help >> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile >> index 671cf5821af1..33ab4ce9b863 100644 >> --- a/drivers/clk/qcom/Makefile >> +++ b/drivers/clk/qcom/Makefile >> @@ -26,6 +26,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o >> obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o >> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o >> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o >> +obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o >> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o >> obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o >> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o > (...) > >> + >> +static int gcc_ipq5018_probe(struct platform_device *pdev) >> +{ >> + int ret; >> + struct regmap *regmap; >> + struct qcom_cc_desc ipq5018_desc = gcc_ipq5018_desc; >> + >> + regmap = qcom_cc_map(pdev, &ipq5018_desc); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + >> + clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config); >> + >> + ret = qcom_cc_really_probe(pdev, &ipq5018_desc, regmap); > return qcom_cc_really_probe(....) ok. >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to register ipq5018 GCC clocks\n"); >> + return ret; >> + } >> + >> + dev_info(&pdev->dev, "Registered ipq5018 GCC clocks provider"); > No probe success messages. This pollutes the log and there is other > infrastructure to check for successful probe. ok. >> + >> + return ret; >> +} >> + >> +static struct platform_driver gcc_ipq5018_driver = { >> + .probe = gcc_ipq5018_probe, >> + .driver = { >> + .name = "qcom,gcc-ipq5018", >> + .owner = THIS_MODULE, > No need for owner. ok. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-21 16:11 ` [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Sricharan R @ 2022-06-24 4:05 ` Bjorn Andersson 2022-06-24 4:05 ` Bjorn Andersson 2022-06-28 1:28 ` kernel test robot 2 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 4:05 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c [..] > +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { > + { .fw_name = "xo", .name = "xo", }, Please replace .fw_name with .index based lookup, in line with what was done in gcc-sc8280xp.c recently. There's no reason to include global name lookup (.name) in new drivers, so please omit this part. > + { .fw_name = "gpll0", .name = "gpll0", }, > + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, > +}; > + [..] > +static struct clk_alpha_pll gpll0_main = { > + .offset = 0x21000, > + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], > + .clkr = { > + .enable_reg = 0x0b000, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gpll0_main", > + .parent_data = &(const struct clk_parent_data){ > + .fw_name = "xo", > + .name = "xo", Are you referring to the board XO here, or the CXO pin on the SoC? On many platforms these are not the same... Please omit the .name here as well and as this is used a few times, please create a struct clk_parent_data for this parent. > + }, > + .num_parents = 1, > + .ops = &clk_alpha_pll_stromer_ops, > + .flags = CLK_IS_CRITICAL, > + }, > + }, > +}; > + > +static struct clk_fixed_factor gpll0_out_main_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "gpll0_out_main_div2", > + .parent_data = &(const struct clk_parent_data){ It would be nice to have a space inbetween ) and { in all these. > + .fw_name = "gpll0_main", > + .name = "gpll0_main", > + }, > + .num_parents = 1, > + .ops = &clk_fixed_factor_ops, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; [..] > +static struct clk_branch gcc_gephy_tx_clk = { > + .halt_reg = 0x56014, > + .halt_check = BRANCH_HALT_DELAY, > + .clkr = { > + .enable_reg = 0x56014, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gcc_gephy_tx_clk", > + .parent_data = &(const struct clk_parent_data){ > + .fw_name = "gmac0_tx_div_clk_src", > + .name = "gmac0_tx_div_clk_src", > + }, This parent_data is repeated multiple times, but more importantly it's not an external clock, so you should use .parent_hw instead of .parent_data. Please review the parent for all your clocks. Regards, Bjorn ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 @ 2022-06-24 4:05 ` Bjorn Andersson 0 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 4:05 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c [..] > +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { > + { .fw_name = "xo", .name = "xo", }, Please replace .fw_name with .index based lookup, in line with what was done in gcc-sc8280xp.c recently. There's no reason to include global name lookup (.name) in new drivers, so please omit this part. > + { .fw_name = "gpll0", .name = "gpll0", }, > + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, > +}; > + [..] > +static struct clk_alpha_pll gpll0_main = { > + .offset = 0x21000, > + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], > + .clkr = { > + .enable_reg = 0x0b000, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gpll0_main", > + .parent_data = &(const struct clk_parent_data){ > + .fw_name = "xo", > + .name = "xo", Are you referring to the board XO here, or the CXO pin on the SoC? On many platforms these are not the same... Please omit the .name here as well and as this is used a few times, please create a struct clk_parent_data for this parent. > + }, > + .num_parents = 1, > + .ops = &clk_alpha_pll_stromer_ops, > + .flags = CLK_IS_CRITICAL, > + }, > + }, > +}; > + > +static struct clk_fixed_factor gpll0_out_main_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "gpll0_out_main_div2", > + .parent_data = &(const struct clk_parent_data){ It would be nice to have a space inbetween ) and { in all these. > + .fw_name = "gpll0_main", > + .name = "gpll0_main", > + }, > + .num_parents = 1, > + .ops = &clk_fixed_factor_ops, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; [..] > +static struct clk_branch gcc_gephy_tx_clk = { > + .halt_reg = 0x56014, > + .halt_check = BRANCH_HALT_DELAY, > + .clkr = { > + .enable_reg = 0x56014, > + .enable_mask = BIT(0), > + .hw.init = &(struct clk_init_data){ > + .name = "gcc_gephy_tx_clk", > + .parent_data = &(const struct clk_parent_data){ > + .fw_name = "gmac0_tx_div_clk_src", > + .name = "gmac0_tx_div_clk_src", > + }, This parent_data is repeated multiple times, but more importantly it's not an external clock, so you should use .parent_hw instead of .parent_data. Please review the parent for all your clocks. Regards, Bjorn _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-24 4:05 ` Bjorn Andersson @ 2022-06-27 19:51 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-27 19:51 UTC (permalink / raw) To: Bjorn Andersson Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/24/2022 9:35 AM, Bjorn Andersson wrote: > On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: >> diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c > [..] >> +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { >> + { .fw_name = "xo", .name = "xo", }, > Please replace .fw_name with .index based lookup, in line with what was > done in gcc-sc8280xp.c recently. Sure, understand will fix it. > > There's no reason to include global name lookup (.name) in new drivers, > so please omit this part. ok. >> + { .fw_name = "gpll0", .name = "gpll0", }, >> + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, >> +}; >> + > [..] >> +static struct clk_alpha_pll gpll0_main = { >> + .offset = 0x21000, >> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], >> + .clkr = { >> + .enable_reg = 0x0b000, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gpll0_main", >> + .parent_data = &(const struct clk_parent_data){ >> + .fw_name = "xo", >> + .name = "xo", > Are you referring to the board XO here, or the CXO pin on the SoC? On > many platforms these are not the same... board XO, will refer your above example and fix it here as well > Please omit the .name here as well and as this is used a few times, > please create a struct clk_parent_data for this parent. ok. >> + }, >> + .num_parents = 1, >> + .ops = &clk_alpha_pll_stromer_ops, >> + .flags = CLK_IS_CRITICAL, >> + }, >> + }, >> +}; >> + >> +static struct clk_fixed_factor gpll0_out_main_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gpll0_out_main_div2", >> + .parent_data = &(const struct clk_parent_data){ > It would be nice to have a space inbetween ) and { in all these. ok. >> + .fw_name = "gpll0_main", >> + .name = "gpll0_main", >> + }, >> + .num_parents = 1, >> + .ops = &clk_fixed_factor_ops, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; > [..] >> +static struct clk_branch gcc_gephy_tx_clk = { >> + .halt_reg = 0x56014, >> + .halt_check = BRANCH_HALT_DELAY, >> + .clkr = { >> + .enable_reg = 0x56014, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gcc_gephy_tx_clk", >> + .parent_data = &(const struct clk_parent_data){ >> + .fw_name = "gmac0_tx_div_clk_src", >> + .name = "gmac0_tx_div_clk_src", >> + }, > This parent_data is repeated multiple times, but more importantly it's > not an external clock, so you should use .parent_hw instead of > .parent_data. > > Please review the parent for all your clocks. ok, will do. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 @ 2022-06-27 19:51 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-27 19:51 UTC (permalink / raw) To: Bjorn Andersson Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/24/2022 9:35 AM, Bjorn Andersson wrote: > On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: >> diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c > [..] >> +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { >> + { .fw_name = "xo", .name = "xo", }, > Please replace .fw_name with .index based lookup, in line with what was > done in gcc-sc8280xp.c recently. Sure, understand will fix it. > > There's no reason to include global name lookup (.name) in new drivers, > so please omit this part. ok. >> + { .fw_name = "gpll0", .name = "gpll0", }, >> + { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, >> +}; >> + > [..] >> +static struct clk_alpha_pll gpll0_main = { >> + .offset = 0x21000, >> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], >> + .clkr = { >> + .enable_reg = 0x0b000, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gpll0_main", >> + .parent_data = &(const struct clk_parent_data){ >> + .fw_name = "xo", >> + .name = "xo", > Are you referring to the board XO here, or the CXO pin on the SoC? On > many platforms these are not the same... board XO, will refer your above example and fix it here as well > Please omit the .name here as well and as this is used a few times, > please create a struct clk_parent_data for this parent. ok. >> + }, >> + .num_parents = 1, >> + .ops = &clk_alpha_pll_stromer_ops, >> + .flags = CLK_IS_CRITICAL, >> + }, >> + }, >> +}; >> + >> +static struct clk_fixed_factor gpll0_out_main_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gpll0_out_main_div2", >> + .parent_data = &(const struct clk_parent_data){ > It would be nice to have a space inbetween ) and { in all these. ok. >> + .fw_name = "gpll0_main", >> + .name = "gpll0_main", >> + }, >> + .num_parents = 1, >> + .ops = &clk_fixed_factor_ops, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; > [..] >> +static struct clk_branch gcc_gephy_tx_clk = { >> + .halt_reg = 0x56014, >> + .halt_check = BRANCH_HALT_DELAY, >> + .clkr = { >> + .enable_reg = 0x56014, >> + .enable_mask = BIT(0), >> + .hw.init = &(struct clk_init_data){ >> + .name = "gcc_gephy_tx_clk", >> + .parent_data = &(const struct clk_parent_data){ >> + .fw_name = "gmac0_tx_div_clk_src", >> + .name = "gmac0_tx_div_clk_src", >> + }, > This parent_data is repeated multiple times, but more importantly it's > not an external clock, so you should use .parent_hw instead of > .parent_data. > > Please review the parent for all your clocks. ok, will do. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 2022-06-21 16:11 ` [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Sricharan R @ 2022-06-28 1:28 ` kernel test robot 2022-06-24 4:05 ` Bjorn Andersson 2022-06-28 1:28 ` kernel test robot 2 siblings, 0 replies; 65+ messages in thread From: kernel test robot @ 2022-06-28 1:28 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Cc: llvm, kbuild-all Hi Sricharan, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next linusw-pinctrl/devel linus/master v5.19-rc4 next-20220627] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/intel-lab-lkp/linux/commits/Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220628/202206280917.m3YJRqsF-lkp@intel.com/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 016342e319fd31e41cf5ed16a6140a8ea2de74dd) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install arm64 cross compiling tool for clang build # apt-get install binutils-aarch64-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/d7a0e1d14ecebd407df120468035592246a71cd6 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 git checkout d7a0e1d14ecebd407df120468035592246a71cd6 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash arch/arm64/kernel/ drivers/clk/qcom/ drivers/pinctrl/qcom/ If you fix the issue, kindly add following tag where applicable Reported-by: kernel test robot <lkp@intel.com> All warnings (new ones prefixed by >>): >> drivers/clk/qcom/gcc-ipq5018.c:118:37: warning: unused variable 'gcc_xo_gpll0_out_main_div2' [-Wunused-const-variable] static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:123:32: warning: unused variable 'gcc_xo_gpll0_out_main_div2_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:201:37: warning: unused variable 'gcc_xo_gpll0_gpll4_gpll2' [-Wunused-const-variable] static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll2[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:208:32: warning: unused variable 'gcc_xo_gpll0_gpll4_gpll2_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll4_gpll2_map[] = { ^ 4 warnings generated. vim +/gcc_xo_gpll0_out_main_div2 +118 drivers/clk/qcom/gcc-ipq5018.c 117 > 118 static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { 119 { .fw_name = "xo", .name = "xo", }, 120 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 121 }; 122 > 123 static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { 124 { P_XO, 0 }, 125 { P_GPLL0_DIV2, 1 }, 126 }; 127 128 static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { 129 { .fw_name = "xo", .name = "xo", }, 130 { .fw_name = "gpll0", .name = "gpll0", }, 131 { .fw_name = "gpll4", .name = "gpll4", }, 132 }; 133 134 static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { 135 { P_XO, 0 }, 136 { P_GPLL0, 1 }, 137 { P_GPLL4, 2 }, 138 }; 139 140 static const struct clk_parent_data gcc_xo_gpll0_core_pi_sleep_clk[] = { 141 { .fw_name = "xo", .name = "xo", }, 142 { .fw_name = "gpll0", .name = "gpll0", }, 143 { .fw_name = "sleep_clk", .name = "sleep_clk", }, 144 }; 145 146 static const struct parent_map gcc_xo_gpll0_core_pi_sleep_clk_map[] = { 147 { P_XO, 0 }, 148 { P_GPLL0, 2 }, 149 { P_CORE_PI_SLEEP_CLK, 6 }, 150 }; 151 152 static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk[] = { 153 { .fw_name = "xo", .name = "xo", }, 154 { .fw_name = "gpll0", .name = "gpll0", }, 155 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 156 { .fw_name = "sleep_clk", .name = "sleep_clk", }, 157 }; 158 159 static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map[] = { 160 { P_XO, 0 }, 161 { P_GPLL0, 1 }, 162 { P_GPLL0_DIV2, 4 }, 163 { P_CORE_PI_SLEEP_CLK, 6 }, 164 }; 165 166 static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { 167 { .fw_name = "xo", .name = "xo", }, 168 { .fw_name = "gpll0", .name = "gpll0", }, 169 { .fw_name = "gpll2", .name = "gpll2", }, 170 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 171 }; 172 173 static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { 174 { P_XO, 0 }, 175 { P_GPLL0, 1 }, 176 { P_GPLL2, 2 }, 177 { P_GPLL0_DIV2, 4 }, 178 }; 179 180 static const struct clk_parent_data gcc_xo_gpll4_gpll0_gpll0_out_main_div2[] = { 181 { .fw_name = "xo", .name = "xo", }, 182 { .fw_name = "gpll4", .name = "gpll4", }, 183 { .fw_name = "gpll0", .name = "gpll0", }, 184 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 185 }; 186 187 static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1[] = { 188 { P_XO, 0 }, 189 { P_GPLL4, 1 }, 190 { P_GPLL0, 2 }, 191 { P_GPLL0_DIV2, 4 }, 192 }; 193 194 static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map2[] = { 195 { P_XO, 0 }, 196 { P_GPLL4, 1 }, 197 { P_GPLL0, 3 }, 198 { P_GPLL0_DIV2, 4 }, 199 }; 200 > 201 static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll2[] = { 202 { .fw_name = "xo", .name = "xo", }, 203 { .fw_name = "gpll0", .name = "gpll0", }, 204 { .fw_name = "gpll4", .name = "gpll4", }, 205 { .fw_name = "gpll2", .name = "gpll2", }, 206 }; 207 > 208 static const struct parent_map gcc_xo_gpll0_gpll4_gpll2_map[] = { 209 { P_XO, 0 }, 210 { P_GPLL0, 1 }, 211 { P_GPLL4, 3 }, 212 { P_GPLL2, 4 }, 213 }; 214 -- 0-DAY CI Kernel Test Service https://01.org/lkp ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 @ 2022-06-28 1:28 ` kernel test robot 0 siblings, 0 replies; 65+ messages in thread From: kernel test robot @ 2022-06-28 1:28 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Cc: llvm, kbuild-all Hi Sricharan, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next linusw-pinctrl/devel linus/master v5.19-rc4 next-20220627] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/intel-lab-lkp/linux/commits/Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220628/202206280917.m3YJRqsF-lkp@intel.com/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 016342e319fd31e41cf5ed16a6140a8ea2de74dd) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install arm64 cross compiling tool for clang build # apt-get install binutils-aarch64-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/d7a0e1d14ecebd407df120468035592246a71cd6 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 git checkout d7a0e1d14ecebd407df120468035592246a71cd6 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash arch/arm64/kernel/ drivers/clk/qcom/ drivers/pinctrl/qcom/ If you fix the issue, kindly add following tag where applicable Reported-by: kernel test robot <lkp@intel.com> All warnings (new ones prefixed by >>): >> drivers/clk/qcom/gcc-ipq5018.c:118:37: warning: unused variable 'gcc_xo_gpll0_out_main_div2' [-Wunused-const-variable] static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:123:32: warning: unused variable 'gcc_xo_gpll0_out_main_div2_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:201:37: warning: unused variable 'gcc_xo_gpll0_gpll4_gpll2' [-Wunused-const-variable] static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll2[] = { ^ >> drivers/clk/qcom/gcc-ipq5018.c:208:32: warning: unused variable 'gcc_xo_gpll0_gpll4_gpll2_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll4_gpll2_map[] = { ^ 4 warnings generated. vim +/gcc_xo_gpll0_out_main_div2 +118 drivers/clk/qcom/gcc-ipq5018.c 117 > 118 static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { 119 { .fw_name = "xo", .name = "xo", }, 120 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 121 }; 122 > 123 static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { 124 { P_XO, 0 }, 125 { P_GPLL0_DIV2, 1 }, 126 }; 127 128 static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { 129 { .fw_name = "xo", .name = "xo", }, 130 { .fw_name = "gpll0", .name = "gpll0", }, 131 { .fw_name = "gpll4", .name = "gpll4", }, 132 }; 133 134 static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { 135 { P_XO, 0 }, 136 { P_GPLL0, 1 }, 137 { P_GPLL4, 2 }, 138 }; 139 140 static const struct clk_parent_data gcc_xo_gpll0_core_pi_sleep_clk[] = { 141 { .fw_name = "xo", .name = "xo", }, 142 { .fw_name = "gpll0", .name = "gpll0", }, 143 { .fw_name = "sleep_clk", .name = "sleep_clk", }, 144 }; 145 146 static const struct parent_map gcc_xo_gpll0_core_pi_sleep_clk_map[] = { 147 { P_XO, 0 }, 148 { P_GPLL0, 2 }, 149 { P_CORE_PI_SLEEP_CLK, 6 }, 150 }; 151 152 static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk[] = { 153 { .fw_name = "xo", .name = "xo", }, 154 { .fw_name = "gpll0", .name = "gpll0", }, 155 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 156 { .fw_name = "sleep_clk", .name = "sleep_clk", }, 157 }; 158 159 static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_sleep_clk_map[] = { 160 { P_XO, 0 }, 161 { P_GPLL0, 1 }, 162 { P_GPLL0_DIV2, 4 }, 163 { P_CORE_PI_SLEEP_CLK, 6 }, 164 }; 165 166 static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { 167 { .fw_name = "xo", .name = "xo", }, 168 { .fw_name = "gpll0", .name = "gpll0", }, 169 { .fw_name = "gpll2", .name = "gpll2", }, 170 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 171 }; 172 173 static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { 174 { P_XO, 0 }, 175 { P_GPLL0, 1 }, 176 { P_GPLL2, 2 }, 177 { P_GPLL0_DIV2, 4 }, 178 }; 179 180 static const struct clk_parent_data gcc_xo_gpll4_gpll0_gpll0_out_main_div2[] = { 181 { .fw_name = "xo", .name = "xo", }, 182 { .fw_name = "gpll4", .name = "gpll4", }, 183 { .fw_name = "gpll0", .name = "gpll0", }, 184 { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", }, 185 }; 186 187 static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map1[] = { 188 { P_XO, 0 }, 189 { P_GPLL4, 1 }, 190 { P_GPLL0, 2 }, 191 { P_GPLL0_DIV2, 4 }, 192 }; 193 194 static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map2[] = { 195 { P_XO, 0 }, 196 { P_GPLL4, 1 }, 197 { P_GPLL0, 3 }, 198 { P_GPLL0_DIV2, 4 }, 199 }; 200 > 201 static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll2[] = { 202 { .fw_name = "xo", .name = "xo", }, 203 { .fw_name = "gpll0", .name = "gpll0", }, 204 { .fw_name = "gpll4", .name = "gpll4", }, 205 { .fw_name = "gpll2", .name = "gpll2", }, 206 }; 207 > 208 static const struct parent_map gcc_xo_gpll0_gpll4_gpll2_map[] = { 209 { P_XO, 0 }, 210 { P_GPLL0, 1 }, 211 { P_GPLL4, 3 }, 212 { P_GPLL2, 4 }, 213 }; 214 -- 0-DAY CI Kernel Test Service https://01.org/lkp _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add device tree binding Documentation details for ipq5018 pinctrl driver. Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml new file mode 100644 index 000000000000..9b16c08bd127 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block + +maintainers: + - Varadarajan Narayanan <quic_varada@quicinc.com> + - Sricharan R <quic_srichara@quicinc.com> + - Nitheesh Sekar <quic_nsekar@quicinc.com> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ5018 platform. + +properties: + compatible: + const: qcom,ipq5018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, + xfem5, xfem6, xfem7 ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-down; + }; + }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add device tree binding Documentation details for ipq5018 pinctrl driver. Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml new file mode 100644 index 000000000000..9b16c08bd127 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block + +maintainers: + - Varadarajan Narayanan <quic_varada@quicinc.com> + - Sricharan R <quic_srichara@quicinc.com> + - Nitheesh Sekar <quic_nsekar@quicinc.com> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ5018 platform. + +properties: + compatible: + const: qcom,ipq5018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, + xfem5, xfem6, xfem7 ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-down; + }; + }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-22 15:13 ` Krzysztof Kozlowski -1 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:13 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> SoB should go after Co-developed. https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > new file mode 100644 > index 000000000000..9b16c08bd127 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > @@ -0,0 +1,145 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block > + > +maintainers: > + - Varadarajan Narayanan <quic_varada@quicinc.com> > + - Sricharan R <quic_srichara@quicinc.com> > + - Nitheesh Sekar <quic_nsekar@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block found in the > + IPQ5018 platform. > + > +properties: > + compatible: > + const: qcom,ipq5018-pinctrl > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: Specifies the TLMM summary IRQ > + maxItems: 1 > + > + interrupt-controller: true > + > + '#interrupt-cells': > + description: > + Specifies the PIN numbers and Flags, as defined in defined in > + include/dt-bindings/interrupt-controller/irq.h > + const: 2 > + > + gpio-controller: true > + > + '#gpio-cells': > + description: Specifying the pin number and flags, as defined in > + include/dt-bindings/gpio/gpio.h > + const: 2 > + > + gpio-ranges: > + maxItems: 1 > + > +#PIN CONFIGURATION NODES > +patternProperties: > + '-pinmux$': > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "/schemas/pinctrl/pincfg-node.yaml" No need for quotes > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" Use consistent quotes in the patch: either ' or ". Don't mix. > + minItems: 1 > + maxItems: 4 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, > + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, > + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, > + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, > + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, > + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, > + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, > + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, > + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, > + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, > + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, > + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, > + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, > + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, > + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, > + xfem5, xfem6, xfem7 ] > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + default: 2 > + description: > + Selects the drive strength for the specified pins, in mA. > + > + bias-pull-down: true > + > + bias-pull-up: true > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - '#interrupt-cells' > + - gpio-controller > + - '#gpio-cells' > + - gpio-ranges Missing allOf with reference to pinctrl schema. > + > +additionalProperties: false > + Best regards, Krzysztof ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings @ 2022-06-22 15:13 ` Krzysztof Kozlowski 0 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:13 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> SoB should go after Co-developed. https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > new file mode 100644 > index 000000000000..9b16c08bd127 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > @@ -0,0 +1,145 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block > + > +maintainers: > + - Varadarajan Narayanan <quic_varada@quicinc.com> > + - Sricharan R <quic_srichara@quicinc.com> > + - Nitheesh Sekar <quic_nsekar@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block found in the > + IPQ5018 platform. > + > +properties: > + compatible: > + const: qcom,ipq5018-pinctrl > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: Specifies the TLMM summary IRQ > + maxItems: 1 > + > + interrupt-controller: true > + > + '#interrupt-cells': > + description: > + Specifies the PIN numbers and Flags, as defined in defined in > + include/dt-bindings/interrupt-controller/irq.h > + const: 2 > + > + gpio-controller: true > + > + '#gpio-cells': > + description: Specifying the pin number and flags, as defined in > + include/dt-bindings/gpio/gpio.h > + const: 2 > + > + gpio-ranges: > + maxItems: 1 > + > +#PIN CONFIGURATION NODES > +patternProperties: > + '-pinmux$': > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "/schemas/pinctrl/pincfg-node.yaml" No need for quotes > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" Use consistent quotes in the patch: either ' or ". Don't mix. > + minItems: 1 > + maxItems: 4 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, > + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, > + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, > + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, > + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, > + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, > + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, > + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, > + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, > + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, > + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, > + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, > + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, > + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, > + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, > + xfem5, xfem6, xfem7 ] > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + default: 2 > + description: > + Selects the drive strength for the specified pins, in mA. > + > + bias-pull-down: true > + > + bias-pull-up: true > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - '#interrupt-cells' > + - gpio-controller > + - '#gpio-cells' > + - gpio-ranges Missing allOf with reference to pinctrl schema. > + > +additionalProperties: false > + Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings 2022-06-22 15:13 ` Krzysztof Kozlowski @ 2022-06-23 6:28 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:28 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:43 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add device tree binding Documentation details for ipq5018 >> pinctrl driver. >> >> Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > SoB should go after Co-developed. > > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 ok, will follow this. >> --- >> .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ >> 1 file changed, 145 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> >> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> new file mode 100644 >> index 000000000000..9b16c08bd127 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> @@ -0,0 +1,145 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block >> + >> +maintainers: >> + - Varadarajan Narayanan <quic_varada@quicinc.com> >> + - Sricharan R <quic_srichara@quicinc.com> >> + - Nitheesh Sekar <quic_nsekar@quicinc.com> >> + >> +description: | >> + This binding describes the Top Level Mode Multiplexer block found in the >> + IPQ5018 platform. >> + >> +properties: >> + compatible: >> + const: qcom,ipq5018-pinctrl >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + description: Specifies the TLMM summary IRQ >> + maxItems: 1 >> + >> + interrupt-controller: true >> + >> + '#interrupt-cells': >> + description: >> + Specifies the PIN numbers and Flags, as defined in defined in >> + include/dt-bindings/interrupt-controller/irq.h >> + const: 2 >> + >> + gpio-controller: true >> + >> + '#gpio-cells': >> + description: Specifying the pin number and flags, as defined in >> + include/dt-bindings/gpio/gpio.h >> + const: 2 >> + >> + gpio-ranges: >> + maxItems: 1 >> + >> +#PIN CONFIGURATION NODES >> +patternProperties: >> + '-pinmux$': >> + type: object >> + description: >> + Pinctrl node's client devices use subnodes for desired pin configuration. >> + Client device subnodes use below standard properties. >> + $ref: "/schemas/pinctrl/pincfg-node.yaml" > No need for quotes ok. >> + >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified in this >> + subnode. >> + items: >> + oneOf: >> + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" > Use consistent quotes in the patch: either ' or ". Don't mix. ok. >> + minItems: 1 >> + maxItems: 4 >> + >> + function: >> + description: >> + Specify the alternative function to be configured for the specified >> + pins. >> + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, >> + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, >> + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, >> + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, >> + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, >> + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, >> + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, >> + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, >> + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, >> + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, >> + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, >> + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, >> + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, >> + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, >> + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, >> + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, >> + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, >> + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, >> + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, >> + xfem5, xfem6, xfem7 ] >> + >> + drive-strength: >> + enum: [2, 4, 6, 8, 10, 12, 14, 16] >> + default: 2 >> + description: >> + Selects the drive strength for the specified pins, in mA. >> + >> + bias-pull-down: true >> + >> + bias-pull-up: true >> + >> + bias-disable: true >> + >> + output-high: true >> + >> + output-low: true >> + >> + required: >> + - pins >> + - function >> + >> + additionalProperties: false >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - interrupt-controller >> + - '#interrupt-cells' >> + - gpio-controller >> + - '#gpio-cells' >> + - gpio-ranges > Missing allOf with reference to pinctrl schema. ok, will fix this. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings @ 2022-06-23 6:28 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:28 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:43 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add device tree binding Documentation details for ipq5018 >> pinctrl driver. >> >> Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > SoB should go after Co-developed. > > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 ok, will follow this. >> --- >> .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ >> 1 file changed, 145 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> >> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> new file mode 100644 >> index 000000000000..9b16c08bd127 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml >> @@ -0,0 +1,145 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block >> + >> +maintainers: >> + - Varadarajan Narayanan <quic_varada@quicinc.com> >> + - Sricharan R <quic_srichara@quicinc.com> >> + - Nitheesh Sekar <quic_nsekar@quicinc.com> >> + >> +description: | >> + This binding describes the Top Level Mode Multiplexer block found in the >> + IPQ5018 platform. >> + >> +properties: >> + compatible: >> + const: qcom,ipq5018-pinctrl >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + description: Specifies the TLMM summary IRQ >> + maxItems: 1 >> + >> + interrupt-controller: true >> + >> + '#interrupt-cells': >> + description: >> + Specifies the PIN numbers and Flags, as defined in defined in >> + include/dt-bindings/interrupt-controller/irq.h >> + const: 2 >> + >> + gpio-controller: true >> + >> + '#gpio-cells': >> + description: Specifying the pin number and flags, as defined in >> + include/dt-bindings/gpio/gpio.h >> + const: 2 >> + >> + gpio-ranges: >> + maxItems: 1 >> + >> +#PIN CONFIGURATION NODES >> +patternProperties: >> + '-pinmux$': >> + type: object >> + description: >> + Pinctrl node's client devices use subnodes for desired pin configuration. >> + Client device subnodes use below standard properties. >> + $ref: "/schemas/pinctrl/pincfg-node.yaml" > No need for quotes ok. >> + >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified in this >> + subnode. >> + items: >> + oneOf: >> + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" > Use consistent quotes in the patch: either ' or ". Don't mix. ok. >> + minItems: 1 >> + maxItems: 4 >> + >> + function: >> + description: >> + Specify the alternative function to be configured for the specified >> + pins. >> + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, >> + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, >> + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, >> + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, >> + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, >> + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, >> + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, >> + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, >> + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, >> + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, >> + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, >> + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, >> + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, >> + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, >> + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, >> + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, >> + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, >> + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, >> + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, >> + xfem5, xfem6, xfem7 ] >> + >> + drive-strength: >> + enum: [2, 4, 6, 8, 10, 12, 14, 16] >> + default: 2 >> + description: >> + Selects the drive strength for the specified pins, in mA. >> + >> + bias-pull-down: true >> + >> + bias-pull-up: true >> + >> + bias-disable: true >> + >> + output-high: true >> + >> + output-low: true >> + >> + required: >> + - pins >> + - function >> + >> + additionalProperties: false >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - interrupt-controller >> + - '#interrupt-cells' >> + - gpio-controller >> + - '#gpio-cells' >> + - gpio-ranges > Missing allOf with reference to pinctrl schema. ok, will fix this. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-24 3:44 ` Bjorn Andersson -1 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 3:44 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > new file mode 100644 > index 000000000000..9b16c08bd127 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > @@ -0,0 +1,145 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block > + > +maintainers: > + - Varadarajan Narayanan <quic_varada@quicinc.com> > + - Sricharan R <quic_srichara@quicinc.com> > + - Nitheesh Sekar <quic_nsekar@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block found in the > + IPQ5018 platform. > + > +properties: > + compatible: > + const: qcom,ipq5018-pinctrl qcom,ipq5018-tlmm please > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: Specifies the TLMM summary IRQ > + maxItems: 1 Please rely on qcom,tlmm-common.yaml, in line with e.g. qcom,sc8280xp-pinctrl.yaml. > + > + interrupt-controller: true > + > + '#interrupt-cells': > + description: > + Specifies the PIN numbers and Flags, as defined in defined in > + include/dt-bindings/interrupt-controller/irq.h > + const: 2 > + > + gpio-controller: true > + > + '#gpio-cells': > + description: Specifying the pin number and flags, as defined in > + include/dt-bindings/gpio/gpio.h > + const: 2 > + > + gpio-ranges: > + maxItems: 1 > + > +#PIN CONFIGURATION NODES > +patternProperties: > + '-pinmux$': This will only allow describing properties directly in the state node, not under subnodes. Please update according to e.g. sc8280xp Also, please use the suffix "-state" > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "/schemas/pinctrl/pincfg-node.yaml" > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" According to the implementation you should only accept "^gpio([1-9]|[1-3][0-9]|4[0-6]$" > + minItems: 1 > + maxItems: 4 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, > + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, > + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, > + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, > + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, > + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, > + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, > + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, > + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, > + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, > + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, > + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, > + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, > + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, > + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, > + xfem5, xfem6, xfem7 ] > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + default: 2 > + description: > + Selects the drive strength for the specified pins, in mA. > + > + bias-pull-down: true > + > + bias-pull-up: true > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - '#interrupt-cells' > + - gpio-controller > + - '#gpio-cells' > + - gpio-ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5018-pinctrl"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 80>; I think this should be 47. Regards, Bjorn > + > + serial3-pinmux { > + pins = "gpio44", "gpio45"; > + function = "blsp0_uart0"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings @ 2022-06-24 3:44 ` Bjorn Andersson 0 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 3:44 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > new file mode 100644 > index 000000000000..9b16c08bd127 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > @@ -0,0 +1,145 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. IPQ5018 TLMM block > + > +maintainers: > + - Varadarajan Narayanan <quic_varada@quicinc.com> > + - Sricharan R <quic_srichara@quicinc.com> > + - Nitheesh Sekar <quic_nsekar@quicinc.com> > + > +description: | > + This binding describes the Top Level Mode Multiplexer block found in the > + IPQ5018 platform. > + > +properties: > + compatible: > + const: qcom,ipq5018-pinctrl qcom,ipq5018-tlmm please > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: Specifies the TLMM summary IRQ > + maxItems: 1 Please rely on qcom,tlmm-common.yaml, in line with e.g. qcom,sc8280xp-pinctrl.yaml. > + > + interrupt-controller: true > + > + '#interrupt-cells': > + description: > + Specifies the PIN numbers and Flags, as defined in defined in > + include/dt-bindings/interrupt-controller/irq.h > + const: 2 > + > + gpio-controller: true > + > + '#gpio-cells': > + description: Specifying the pin number and flags, as defined in > + include/dt-bindings/gpio/gpio.h > + const: 2 > + > + gpio-ranges: > + maxItems: 1 > + > +#PIN CONFIGURATION NODES > +patternProperties: > + '-pinmux$': This will only allow describing properties directly in the state node, not under subnodes. Please update according to e.g. sc8280xp Also, please use the suffix "-state" > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "/schemas/pinctrl/pincfg-node.yaml" > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" According to the implementation you should only accept "^gpio([1-9]|[1-3][0-9]|4[0-6]$" > + minItems: 1 > + maxItems: 4 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, > + audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, audio_txmclk, > + blsp0_i2c, blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, > + blsp1_i2c1, blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, > + blsp1_uart2, blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, > + blsp2_spi1, btss0, btss1, btss10, btss11, btss12, btss13, btss2, > + btss3, btss4, btss5, btss6, btss7, btss8, btss9, burn0, burn1, > + cri_trng, cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, > + gcc_plltest, gcc_tlmm, gpio, mac0, mac1, mdc, mdio, pcie0_clk, > + pcie0_wake, pcie1_clk, pcie1_wake, pll_test, prng_rosc, pwm0, pwm1, > + pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, > + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, > + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, qspi0, qspi1, > + qspi2, qspi3, reset_out, sdc1_clk, sdc1_cmd, sdc10, sdc11, sdc12, > + sdc13, wci0, wci1, wci2, wci3, wci4, wci5, wci6, wci7, wsa_swrm, > + wsi_clk3, wsi_data3, wsis_reset, xfem0, xfem1, xfem2, xfem3, xfem4, > + xfem5, xfem6, xfem7 ] > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + default: 2 > + description: > + Selects the drive strength for the specified pins, in mA. > + > + bias-pull-down: true > + > + bias-pull-up: true > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - '#interrupt-cells' > + - gpio-controller > + - '#gpio-cells' > + - gpio-ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5018-pinctrl"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 80>; I think this should be 47. Regards, Bjorn > + > + serial3-pinmux { > + pins = "gpio44", "gpio45"; > + function = "blsp0_uart0"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-24 17:26 ` Rob Herring -1 siblings, 0 replies; 65+ messages in thread From: Rob Herring @ 2022-06-24 17:26 UTC (permalink / raw) To: Sricharan R Cc: linux-kernel, robh+dt, devicetree, sboyd, linux-arm-msm, bjorn.andersson, mturquette, linux-clk, linux-gpio, krzysztof.kozlowski+dt, agross, quic_varada, linus.walleij, linux-arm-kernel, catalin.marinas, p.zabel On Tue, 21 Jun 2022 21:41:22 +0530, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:72:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:73:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:74:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:75:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:76:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:77:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:78:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:79:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:80:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:81:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:82:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:83:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:84:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:85:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:86:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:87:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:88:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:89:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:90:11: [warning] wrong indentation: expected 16 but found 10 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings @ 2022-06-24 17:26 ` Rob Herring 0 siblings, 0 replies; 65+ messages in thread From: Rob Herring @ 2022-06-24 17:26 UTC (permalink / raw) To: Sricharan R Cc: linux-kernel, robh+dt, devicetree, sboyd, linux-arm-msm, bjorn.andersson, mturquette, linux-clk, linux-gpio, krzysztof.kozlowski+dt, agross, quic_varada, linus.walleij, linux-arm-kernel, catalin.marinas, p.zabel On Tue, 21 Jun 2022 21:41:22 +0530, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add device tree binding Documentation details for ipq5018 > pinctrl driver. > > Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 ++++++++++++++++++ > 1 file changed, 145 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:72:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:73:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:74:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:75:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:76:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:77:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:78:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:79:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:80:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:81:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:82:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:83:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:84:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:85:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:86:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:87:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:88:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:89:11: [warning] wrong indentation: expected 16 but found 10 (indentation) ./Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml:90:11: [warning] wrong indentation: expected 16 but found 10 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> This adds the pinctrl definitions for the TLMM of IPQ5018. Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 +++++++++++++++++++++++++ 3 files changed, 802 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index c51ef54a9f61..44fc242d73f7 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -36,6 +36,16 @@ config PINCTRL_IPQ4019 This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm IPQ4019 platform. +config PINCTRL_IPQ5018 + tristate "Qualcomm Technologies, Inc. IPQ5018 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ5018 platform. Select this for + IPQ5018. + config PINCTRL_IPQ8064 tristate "Qualcomm IPQ8064 pin controller driver" depends on OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 5efbfd9f6248..98bba82fbcaa 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o +obj-$(CONFIG_PINCTRL_IPQ5018) += pinctrl-ipq5018.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o diff --git a/drivers/pinctrl/qcom/pinctrl-ipq5018.c b/drivers/pinctrl/qcom/pinctrl-ipq5018.c new file mode 100644 index 000000000000..5a3b3d26cb2c --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-ipq5018.c @@ -0,0 +1,791 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define REG_SIZE 0x1000 +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = REG_SIZE * id, \ + .io_reg = 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = 0x8 + REG_SIZE * id, \ + .intr_status_reg = 0xc + REG_SIZE * id, \ + .intr_target_reg = 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +static const struct pinctrl_pin_desc ipq5018_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); + +enum ipq5018_functions { + msm_mux_atest_char, + msm_mux_audio_pdm0, + msm_mux_audio_pdm1, + msm_mux_audio_rxbclk, + msm_mux_audio_rxd, + msm_mux_audio_rxfsync, + msm_mux_audio_rxmclk, + msm_mux_audio_txbclk, + msm_mux_audio_txd, + msm_mux_audio_txfsync, + msm_mux_audio_txmclk, + msm_mux_blsp0_i2c, + msm_mux_blsp0_spi, + msm_mux_blsp0_uart0, + msm_mux_blsp0_uart1, + msm_mux_blsp1_i2c0, + msm_mux_blsp1_i2c1, + msm_mux_blsp1_spi0, + msm_mux_blsp1_spi1, + msm_mux_blsp1_uart0, + msm_mux_blsp1_uart1, + msm_mux_blsp1_uart2, + msm_mux_blsp2_i2c0, + msm_mux_blsp2_i2c1, + msm_mux_blsp2_spi, + msm_mux_blsp2_spi0, + msm_mux_blsp2_spi1, + msm_mux_btss, + msm_mux_burn0, + msm_mux_burn1, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_cxc_clk, + msm_mux_cxc_data, + msm_mux_dbg_out, + msm_mux_eud_gpio, + msm_mux_gcc_plltest, + msm_mux_gcc_tlmm, + msm_mux_gpio, + msm_mux_led0, + msm_mux_led2, + msm_mux_mac0, + msm_mux_mac1, + msm_mux_mdc, + msm_mux_mdio, + msm_mux_pcie0_clk, + msm_mux_pcie0_wake, + msm_mux_pcie1_clk, + msm_mux_pcie1_wake, + msm_mux_pll_test, + msm_mux_prng_rosc, + msm_mux_pwm0, + msm_mux_pwm1, + msm_mux_pwm2, + msm_mux_pwm3, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qdss_traceclk_a, + msm_mux_qdss_traceclk_b, + msm_mux_qdss_tracectl_a, + msm_mux_qdss_tracectl_b, + msm_mux_qdss_tracedata_a, + msm_mux_qdss_tracedata_b, + msm_mux_qspi_clk, + msm_mux_qspi_cs, + msm_mux_qspi_data, + msm_mux_reset_out, + msm_mux_sdc1_clk, + msm_mux_sdc1_cmd, + msm_mux_sdc1_data, + msm_mux_wci_txd, + msm_mux_wci_rxd, + msm_mux_wsa_swrm, + msm_mux_wsi_clk3, + msm_mux_wsi_data3, + msm_mux_wsis_reset, + msm_mux_xfem, + msm_mux__, +}; + +static const char * const atest_char_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio37", +}; + +static const char * const _groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", +}; + +static const char * const wci_txd_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const wci_rxd_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const xfem_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const qdss_cti_trig_out_a0_groups[] = { + "gpio0", +}; + +static const char * const qdss_cti_trig_in_a0_groups[] = { + "gpio1", +}; + +static const char * const qdss_cti_trig_out_a1_groups[] = { + "gpio2", +}; + +static const char * const qdss_cti_trig_in_a1_groups[] = { + "gpio3", +}; + +static const char * const sdc1_data_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; + +static const char * const qspi_data_groups[] = { + "gpio4", + "gpio5", + "gpio6", + "gpio7", +}; + +static const char * const blsp1_spi1_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; + +static const char * const btss_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio17", "gpio18", + "gpio19", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", +}; + +static const char * const dbg_out_groups[] = { + "gpio4", +}; + +static const char * const qdss_traceclk_a_groups[] = { + "gpio4", +}; + +static const char * const burn0_groups[] = { + "gpio4", +}; + +static const char * const cxc_clk_groups[] = { + "gpio5", +}; + +static const char * const blsp1_i2c1_groups[] = { + "gpio5", "gpio6", +}; + +static const char * const qdss_tracectl_a_groups[] = { + "gpio5", +}; + +static const char * const burn1_groups[] = { + "gpio5", +}; + +static const char * const cxc_data_groups[] = { + "gpio6", +}; + +static const char * const qdss_tracedata_a_groups[] = { + "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", + "gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", +}; + +static const char * const mac0_groups[] = { + "gpio7", +}; + +static const char * const sdc1_cmd_groups[] = { + "gpio8", +}; + +static const char * const qspi_cs_groups[] = { + "gpio8", +}; + +static const char * const mac1_groups[] = { + "gpio8", +}; + +static const char * const sdc1_clk_groups[] = { + "gpio9", +}; + +static const char * const qspi_clk_groups[] = { + "gpio9", +}; + +static const char * const blsp0_spi_groups[] = { + "gpio10", "gpio11", "gpio12", "gpio13", +}; + +static const char * const blsp1_uart0_groups[] = { + "gpio10", "gpio11", "gpio12", "gpio13", +}; + +static const char * const gcc_plltest_groups[] = { + "gpio10", "gpio12", +}; + +static const char * const gcc_tlmm_groups[] = { + "gpio11", +}; + +static const char * const blsp0_i2c_groups[] = { + "gpio12", "gpio13", +}; + +static const char * const pcie0_clk_groups[] = { + "gpio14", +}; + +static const char * const cri_trng0_groups[] = { + "gpio14", +}; + +static const char * const cri_trng1_groups[] = { + "gpio15", +}; + +static const char * const pcie0_wake_groups[] = { + "gpio16", +}; + +static const char * const cri_trng_groups[] = { + "gpio16", +}; + +static const char * const pcie1_clk_groups[] = { + "gpio17", +}; + +static const char * const prng_rosc_groups[] = { + "gpio17", +}; + +static const char * const blsp1_spi0_groups[] = { + "gpio18", "gpio19", "gpio20", "gpio21", +}; + +static const char * const pcie1_wake_groups[] = { + "gpio19", +}; + +static const char * const blsp1_i2c0_groups[] = { + "gpio19", "gpio20", +}; + +static const char * const blsp0_uart0_groups[] = { + "gpio20", "gpio21", +}; + +static const char * const pll_test_groups[] = { + "gpio22", +}; + +static const char * const eud_gpio_groups[] = { + "gpio22", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", +}; + +static const char * const audio_rxmclk_groups[] = { + "gpio23", "gpio23", +}; + +static const char * const audio_pdm0_groups[] = { + "gpio23", "gpio24", +}; + +static const char * const blsp2_spi1_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", +}; + +static const char * const blsp1_uart2_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", +}; + +static const char * const qdss_tracedata_b_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", +}; + +static const char * const audio_rxbclk_groups[] = { + "gpio24", +}; + +static const char * const audio_rxfsync_groups[] = { + "gpio25", +}; + +static const char * const audio_pdm1_groups[] = { + "gpio25", "gpio26", +}; + +static const char * const blsp2_i2c1_groups[] = { + "gpio25", "gpio26", +}; + +static const char * const audio_rxd_groups[] = { + "gpio26", +}; + +static const char * const audio_txmclk_groups[] = { + "gpio27", "gpio27", +}; + +static const char * const wsa_swrm_groups[] = { + "gpio27", "gpio28", +}; + +static const char * const blsp2_spi_groups[] = { + "gpio27", +}; + +static const char * const audio_txbclk_groups[] = { + "gpio28", +}; + +static const char * const blsp0_uart1_groups[] = { + "gpio28", "gpio29", +}; + +static const char * const audio_txfsync_groups[] = { + "gpio29", +}; + +static const char * const audio_txd_groups[] = { + "gpio30", +}; + +static const char * const wsis_reset_groups[] = { + "gpio30", +}; + +static const char * const blsp2_spi0_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; + +static const char * const blsp1_uart1_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; + +static const char * const blsp2_i2c0_groups[] = { + "gpio33", "gpio34", +}; + +static const char * const mdc_groups[] = { + "gpio36", +}; + +static const char * const wsi_clk3_groups[] = { + "gpio36", +}; + +static const char * const mdio_groups[] = { + "gpio37", +}; + +static const char * const wsi_data3_groups[] = { + "gpio37", +}; + +static const char * const qdss_traceclk_b_groups[] = { + "gpio39", +}; + +static const char * const reset_out_groups[] = { + "gpio40", +}; + +static const char * const qdss_tracectl_b_groups[] = { + "gpio40", +}; + +static const char * const pwm0_groups[] = { + "gpio42", +}; + +static const char * const qdss_cti_trig_out_b0_groups[] = { + "gpio42", +}; + +static const char * const pwm1_groups[] = { + "gpio43", +}; + +static const char * const qdss_cti_trig_in_b0_groups[] = { + "gpio43", +}; + +static const char * const pwm2_groups[] = { + "gpio44", +}; + +static const char * const qdss_cti_trig_out_b1_groups[] = { + "gpio44", +}; + +static const char * const pwm3_groups[] = { + "gpio45", +}; + +static const char * const qdss_cti_trig_in_b1_groups[] = { + "gpio45", +}; + +static const char * const led0_groups[] = { + "gpio46", "gpio30", "gpio10", +}; + +static const char * const led2_groups[] = { + "gpio30", +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", +}; + +static const struct msm_function ipq5018_functions[] = { + FUNCTION(atest_char), + FUNCTION(audio_pdm0), + FUNCTION(audio_pdm1), + FUNCTION(audio_rxbclk), + FUNCTION(audio_rxd), + FUNCTION(audio_rxfsync), + FUNCTION(audio_rxmclk), + FUNCTION(audio_txbclk), + FUNCTION(audio_txd), + FUNCTION(audio_txfsync), + FUNCTION(audio_txmclk), + FUNCTION(blsp0_i2c), + FUNCTION(blsp0_spi), + FUNCTION(blsp0_uart0), + FUNCTION(blsp0_uart1), + FUNCTION(blsp1_i2c0), + FUNCTION(blsp1_i2c1), + FUNCTION(blsp1_spi0), + FUNCTION(blsp1_spi1), + FUNCTION(blsp1_uart0), + FUNCTION(blsp1_uart1), + FUNCTION(blsp1_uart2), + FUNCTION(blsp2_i2c0), + FUNCTION(blsp2_i2c1), + FUNCTION(blsp2_spi), + FUNCTION(blsp2_spi0), + FUNCTION(blsp2_spi1), + FUNCTION(btss), + FUNCTION(burn0), + FUNCTION(burn1), + FUNCTION(cri_trng), + FUNCTION(cri_trng0), + FUNCTION(cri_trng1), + FUNCTION(cxc_clk), + FUNCTION(cxc_data), + FUNCTION(dbg_out), + FUNCTION(eud_gpio), + FUNCTION(gcc_plltest), + FUNCTION(gcc_tlmm), + FUNCTION(gpio), + FUNCTION(led0), + FUNCTION(led2), + FUNCTION(mac0), + FUNCTION(mac1), + FUNCTION(mdc), + FUNCTION(mdio), + FUNCTION(pcie0_clk), + FUNCTION(pcie0_wake), + FUNCTION(pcie1_clk), + FUNCTION(pcie1_wake), + FUNCTION(pll_test), + FUNCTION(prng_rosc), + FUNCTION(pwm0), + FUNCTION(pwm1), + FUNCTION(pwm2), + FUNCTION(pwm3), + FUNCTION(qdss_cti_trig_in_a0), + FUNCTION(qdss_cti_trig_in_a1), + FUNCTION(qdss_cti_trig_in_b0), + FUNCTION(qdss_cti_trig_in_b1), + FUNCTION(qdss_cti_trig_out_a0), + FUNCTION(qdss_cti_trig_out_a1), + FUNCTION(qdss_cti_trig_out_b0), + FUNCTION(qdss_cti_trig_out_b1), + FUNCTION(qdss_traceclk_a), + FUNCTION(qdss_traceclk_b), + FUNCTION(qdss_tracectl_a), + FUNCTION(qdss_tracectl_b), + FUNCTION(qdss_tracedata_a), + FUNCTION(qdss_tracedata_b), + FUNCTION(qspi_clk), + FUNCTION(qspi_cs), + FUNCTION(qspi_data), + FUNCTION(reset_out), + FUNCTION(sdc1_clk), + FUNCTION(sdc1_cmd), + FUNCTION(sdc1_data), + FUNCTION(wci_txd), + FUNCTION(wci_rxd), + FUNCTION(wsa_swrm), + FUNCTION(wsi_clk3), + FUNCTION(wsi_data3), + FUNCTION(wsis_reset), + FUNCTION(xfem), +}; + +static const struct msm_pingroup ipq5018_groups[] = { + PINGROUP(0, atest_char, _, qdss_cti_trig_out_a0, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(1, atest_char, _, qdss_cti_trig_in_a0, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(2, atest_char, _, qdss_cti_trig_out_a1, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(3, atest_char, _, qdss_cti_trig_in_a1, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(4, sdc1_data, qspi_data, blsp1_spi1, btss, dbg_out, qdss_traceclk_a, _, burn0, _), + PINGROUP(5, sdc1_data, qspi_data, cxc_clk, blsp1_spi1, blsp1_i2c1, btss, _, qdss_tracectl_a, _), + PINGROUP(6, sdc1_data, qspi_data, cxc_data, blsp1_spi1, blsp1_i2c1, btss, _, qdss_tracedata_a, _), + PINGROUP(7, sdc1_data, qspi_data, mac0, blsp1_spi1, btss, _, qdss_tracedata_a, _, _), + PINGROUP(8, sdc1_cmd, qspi_cs, mac1, btss, _, qdss_tracedata_a, _, _, _), + PINGROUP(9, sdc1_clk, qspi_clk, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(10, blsp0_spi, blsp1_uart0, led0, gcc_plltest, qdss_tracedata_a, _, _, _, _), + PINGROUP(11, blsp0_spi, blsp1_uart0, _, gcc_tlmm, qdss_tracedata_a, _, _, _, _), + PINGROUP(12, blsp0_spi, blsp0_i2c, blsp1_uart0, _, gcc_plltest, qdss_tracedata_a, _, _, _), + PINGROUP(13, blsp0_spi, blsp0_i2c, blsp1_uart0, _, qdss_tracedata_a, _, _, _, _), + PINGROUP(14, pcie0_clk, _, _, cri_trng0, qdss_tracedata_a, _, _, _, _), + PINGROUP(15, _, _, cri_trng1, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(16, pcie0_wake, _, _, cri_trng, qdss_tracedata_a, _, _, _, _), + PINGROUP(17, pcie1_clk, btss, _, prng_rosc, qdss_tracedata_a, _, _, _, _), + PINGROUP(18, blsp1_spi0, btss, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(19, pcie1_wake, blsp1_spi0, blsp1_i2c0, btss, _, qdss_tracedata_a, _, _, _), + PINGROUP(20, blsp0_uart0, blsp1_spi0, blsp1_i2c0, _, qdss_tracedata_a, _, _, _, _), + PINGROUP(21, blsp0_uart0, blsp1_spi0, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(22, _, pll_test, eud_gpio, _, _, _, _, _, _), + PINGROUP(23, audio_rxmclk, audio_pdm0, audio_rxmclk, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(24, audio_rxbclk, audio_pdm0, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _, _), + PINGROUP(25, audio_rxfsync, audio_pdm1, blsp2_i2c1, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(26, audio_rxd, audio_pdm1, blsp2_i2c1, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(27, audio_txmclk, wsa_swrm, audio_txmclk, blsp2_spi, btss, _, qdss_tracedata_b, _, _), + PINGROUP(28, audio_txbclk, wsa_swrm, blsp0_uart1, btss, qdss_tracedata_b, _, _, _, _), + PINGROUP(29, audio_txfsync, _, blsp0_uart1, _, qdss_tracedata_b, _, _, _, _), + PINGROUP(30, audio_txd, led2, led0, _, _, _, _, _, _), + PINGROUP(31, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _, _), + PINGROUP(32, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _, _), + PINGROUP(33, blsp2_i2c0, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _), + PINGROUP(34, blsp2_i2c0, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _), + PINGROUP(35, _, qdss_tracedata_b, eud_gpio, _, _, _, _, _, _), + PINGROUP(36, mdc, qdss_tracedata_b, _, wsi_clk3, _, _, _, _, _), + PINGROUP(37, mdio, atest_char, qdss_tracedata_b, _, wsi_data3, _, _, _, _), + PINGROUP(38, qdss_tracedata_b, _, _, _, _, _, _, _, _), + PINGROUP(39, qdss_traceclk_b, _, _, _, _, _, _, _, _), + PINGROUP(40, reset_out, qdss_tracectl_b, _, _, _, _, _, _, _), + PINGROUP(41, _, _, _, _, _, _, _, _, _), + PINGROUP(42, pwm0, qdss_cti_trig_out_b0, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(43, pwm1, qdss_cti_trig_in_b0, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(44, pwm2, qdss_cti_trig_out_b1, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(45, pwm3, qdss_cti_trig_in_b1, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(46, led0, _, _, _, _, _, _, _, _), +}; + +static const struct msm_pinctrl_soc_data ipq5018_pinctrl = { + .pins = ipq5018_pins, + .npins = ARRAY_SIZE(ipq5018_pins), + .functions = ipq5018_functions, + .nfunctions = ARRAY_SIZE(ipq5018_functions), + .groups = ipq5018_groups, + .ngroups = ARRAY_SIZE(ipq5018_groups), + .ngpios = 47, +}; + +static int ipq5018_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &ipq5018_pinctrl); +} + +static const struct of_device_id ipq5018_pinctrl_of_match[] = { + { .compatible = "qcom,ipq5018-pinctrl", }, + { }, +}; + +static struct platform_driver ipq5018_pinctrl_driver = { + .driver = { + .name = "ipq5018-pinctrl", + .of_match_table = ipq5018_pinctrl_of_match, + }, + .probe = ipq5018_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init ipq5018_pinctrl_init(void) +{ + return platform_driver_register(&ipq5018_pinctrl_driver); +} +arch_initcall(ipq5018_pinctrl_init); + +static void __exit ipq5018_pinctrl_exit(void) +{ + platform_driver_unregister(&ipq5018_pinctrl_driver); +} +module_exit(ipq5018_pinctrl_exit); + +MODULE_DESCRIPTION("Qualcomm Technologies Inc ipq5018 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, ipq5018_pinctrl_of_match); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> This adds the pinctrl definitions for the TLMM of IPQ5018. Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 +++++++++++++++++++++++++ 3 files changed, 802 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index c51ef54a9f61..44fc242d73f7 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -36,6 +36,16 @@ config PINCTRL_IPQ4019 This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm IPQ4019 platform. +config PINCTRL_IPQ5018 + tristate "Qualcomm Technologies, Inc. IPQ5018 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ5018 platform. Select this for + IPQ5018. + config PINCTRL_IPQ8064 tristate "Qualcomm IPQ8064 pin controller driver" depends on OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 5efbfd9f6248..98bba82fbcaa 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o +obj-$(CONFIG_PINCTRL_IPQ5018) += pinctrl-ipq5018.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o diff --git a/drivers/pinctrl/qcom/pinctrl-ipq5018.c b/drivers/pinctrl/qcom/pinctrl-ipq5018.c new file mode 100644 index 000000000000..5a3b3d26cb2c --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-ipq5018.c @@ -0,0 +1,791 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define REG_SIZE 0x1000 +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = REG_SIZE * id, \ + .io_reg = 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = 0x8 + REG_SIZE * id, \ + .intr_status_reg = 0xc + REG_SIZE * id, \ + .intr_target_reg = 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +static const struct pinctrl_pin_desc ipq5018_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); + +enum ipq5018_functions { + msm_mux_atest_char, + msm_mux_audio_pdm0, + msm_mux_audio_pdm1, + msm_mux_audio_rxbclk, + msm_mux_audio_rxd, + msm_mux_audio_rxfsync, + msm_mux_audio_rxmclk, + msm_mux_audio_txbclk, + msm_mux_audio_txd, + msm_mux_audio_txfsync, + msm_mux_audio_txmclk, + msm_mux_blsp0_i2c, + msm_mux_blsp0_spi, + msm_mux_blsp0_uart0, + msm_mux_blsp0_uart1, + msm_mux_blsp1_i2c0, + msm_mux_blsp1_i2c1, + msm_mux_blsp1_spi0, + msm_mux_blsp1_spi1, + msm_mux_blsp1_uart0, + msm_mux_blsp1_uart1, + msm_mux_blsp1_uart2, + msm_mux_blsp2_i2c0, + msm_mux_blsp2_i2c1, + msm_mux_blsp2_spi, + msm_mux_blsp2_spi0, + msm_mux_blsp2_spi1, + msm_mux_btss, + msm_mux_burn0, + msm_mux_burn1, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_cxc_clk, + msm_mux_cxc_data, + msm_mux_dbg_out, + msm_mux_eud_gpio, + msm_mux_gcc_plltest, + msm_mux_gcc_tlmm, + msm_mux_gpio, + msm_mux_led0, + msm_mux_led2, + msm_mux_mac0, + msm_mux_mac1, + msm_mux_mdc, + msm_mux_mdio, + msm_mux_pcie0_clk, + msm_mux_pcie0_wake, + msm_mux_pcie1_clk, + msm_mux_pcie1_wake, + msm_mux_pll_test, + msm_mux_prng_rosc, + msm_mux_pwm0, + msm_mux_pwm1, + msm_mux_pwm2, + msm_mux_pwm3, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qdss_traceclk_a, + msm_mux_qdss_traceclk_b, + msm_mux_qdss_tracectl_a, + msm_mux_qdss_tracectl_b, + msm_mux_qdss_tracedata_a, + msm_mux_qdss_tracedata_b, + msm_mux_qspi_clk, + msm_mux_qspi_cs, + msm_mux_qspi_data, + msm_mux_reset_out, + msm_mux_sdc1_clk, + msm_mux_sdc1_cmd, + msm_mux_sdc1_data, + msm_mux_wci_txd, + msm_mux_wci_rxd, + msm_mux_wsa_swrm, + msm_mux_wsi_clk3, + msm_mux_wsi_data3, + msm_mux_wsis_reset, + msm_mux_xfem, + msm_mux__, +}; + +static const char * const atest_char_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio37", +}; + +static const char * const _groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", +}; + +static const char * const wci_txd_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const wci_rxd_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const xfem_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", + "gpio42", "gpio43", "gpio44", "gpio45", +}; + +static const char * const qdss_cti_trig_out_a0_groups[] = { + "gpio0", +}; + +static const char * const qdss_cti_trig_in_a0_groups[] = { + "gpio1", +}; + +static const char * const qdss_cti_trig_out_a1_groups[] = { + "gpio2", +}; + +static const char * const qdss_cti_trig_in_a1_groups[] = { + "gpio3", +}; + +static const char * const sdc1_data_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; + +static const char * const qspi_data_groups[] = { + "gpio4", + "gpio5", + "gpio6", + "gpio7", +}; + +static const char * const blsp1_spi1_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; + +static const char * const btss_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio17", "gpio18", + "gpio19", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", +}; + +static const char * const dbg_out_groups[] = { + "gpio4", +}; + +static const char * const qdss_traceclk_a_groups[] = { + "gpio4", +}; + +static const char * const burn0_groups[] = { + "gpio4", +}; + +static const char * const cxc_clk_groups[] = { + "gpio5", +}; + +static const char * const blsp1_i2c1_groups[] = { + "gpio5", "gpio6", +}; + +static const char * const qdss_tracectl_a_groups[] = { + "gpio5", +}; + +static const char * const burn1_groups[] = { + "gpio5", +}; + +static const char * const cxc_data_groups[] = { + "gpio6", +}; + +static const char * const qdss_tracedata_a_groups[] = { + "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", + "gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", +}; + +static const char * const mac0_groups[] = { + "gpio7", +}; + +static const char * const sdc1_cmd_groups[] = { + "gpio8", +}; + +static const char * const qspi_cs_groups[] = { + "gpio8", +}; + +static const char * const mac1_groups[] = { + "gpio8", +}; + +static const char * const sdc1_clk_groups[] = { + "gpio9", +}; + +static const char * const qspi_clk_groups[] = { + "gpio9", +}; + +static const char * const blsp0_spi_groups[] = { + "gpio10", "gpio11", "gpio12", "gpio13", +}; + +static const char * const blsp1_uart0_groups[] = { + "gpio10", "gpio11", "gpio12", "gpio13", +}; + +static const char * const gcc_plltest_groups[] = { + "gpio10", "gpio12", +}; + +static const char * const gcc_tlmm_groups[] = { + "gpio11", +}; + +static const char * const blsp0_i2c_groups[] = { + "gpio12", "gpio13", +}; + +static const char * const pcie0_clk_groups[] = { + "gpio14", +}; + +static const char * const cri_trng0_groups[] = { + "gpio14", +}; + +static const char * const cri_trng1_groups[] = { + "gpio15", +}; + +static const char * const pcie0_wake_groups[] = { + "gpio16", +}; + +static const char * const cri_trng_groups[] = { + "gpio16", +}; + +static const char * const pcie1_clk_groups[] = { + "gpio17", +}; + +static const char * const prng_rosc_groups[] = { + "gpio17", +}; + +static const char * const blsp1_spi0_groups[] = { + "gpio18", "gpio19", "gpio20", "gpio21", +}; + +static const char * const pcie1_wake_groups[] = { + "gpio19", +}; + +static const char * const blsp1_i2c0_groups[] = { + "gpio19", "gpio20", +}; + +static const char * const blsp0_uart0_groups[] = { + "gpio20", "gpio21", +}; + +static const char * const pll_test_groups[] = { + "gpio22", +}; + +static const char * const eud_gpio_groups[] = { + "gpio22", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", +}; + +static const char * const audio_rxmclk_groups[] = { + "gpio23", "gpio23", +}; + +static const char * const audio_pdm0_groups[] = { + "gpio23", "gpio24", +}; + +static const char * const blsp2_spi1_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", +}; + +static const char * const blsp1_uart2_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", +}; + +static const char * const qdss_tracedata_b_groups[] = { + "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", +}; + +static const char * const audio_rxbclk_groups[] = { + "gpio24", +}; + +static const char * const audio_rxfsync_groups[] = { + "gpio25", +}; + +static const char * const audio_pdm1_groups[] = { + "gpio25", "gpio26", +}; + +static const char * const blsp2_i2c1_groups[] = { + "gpio25", "gpio26", +}; + +static const char * const audio_rxd_groups[] = { + "gpio26", +}; + +static const char * const audio_txmclk_groups[] = { + "gpio27", "gpio27", +}; + +static const char * const wsa_swrm_groups[] = { + "gpio27", "gpio28", +}; + +static const char * const blsp2_spi_groups[] = { + "gpio27", +}; + +static const char * const audio_txbclk_groups[] = { + "gpio28", +}; + +static const char * const blsp0_uart1_groups[] = { + "gpio28", "gpio29", +}; + +static const char * const audio_txfsync_groups[] = { + "gpio29", +}; + +static const char * const audio_txd_groups[] = { + "gpio30", +}; + +static const char * const wsis_reset_groups[] = { + "gpio30", +}; + +static const char * const blsp2_spi0_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; + +static const char * const blsp1_uart1_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; + +static const char * const blsp2_i2c0_groups[] = { + "gpio33", "gpio34", +}; + +static const char * const mdc_groups[] = { + "gpio36", +}; + +static const char * const wsi_clk3_groups[] = { + "gpio36", +}; + +static const char * const mdio_groups[] = { + "gpio37", +}; + +static const char * const wsi_data3_groups[] = { + "gpio37", +}; + +static const char * const qdss_traceclk_b_groups[] = { + "gpio39", +}; + +static const char * const reset_out_groups[] = { + "gpio40", +}; + +static const char * const qdss_tracectl_b_groups[] = { + "gpio40", +}; + +static const char * const pwm0_groups[] = { + "gpio42", +}; + +static const char * const qdss_cti_trig_out_b0_groups[] = { + "gpio42", +}; + +static const char * const pwm1_groups[] = { + "gpio43", +}; + +static const char * const qdss_cti_trig_in_b0_groups[] = { + "gpio43", +}; + +static const char * const pwm2_groups[] = { + "gpio44", +}; + +static const char * const qdss_cti_trig_out_b1_groups[] = { + "gpio44", +}; + +static const char * const pwm3_groups[] = { + "gpio45", +}; + +static const char * const qdss_cti_trig_in_b1_groups[] = { + "gpio45", +}; + +static const char * const led0_groups[] = { + "gpio46", "gpio30", "gpio10", +}; + +static const char * const led2_groups[] = { + "gpio30", +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", +}; + +static const struct msm_function ipq5018_functions[] = { + FUNCTION(atest_char), + FUNCTION(audio_pdm0), + FUNCTION(audio_pdm1), + FUNCTION(audio_rxbclk), + FUNCTION(audio_rxd), + FUNCTION(audio_rxfsync), + FUNCTION(audio_rxmclk), + FUNCTION(audio_txbclk), + FUNCTION(audio_txd), + FUNCTION(audio_txfsync), + FUNCTION(audio_txmclk), + FUNCTION(blsp0_i2c), + FUNCTION(blsp0_spi), + FUNCTION(blsp0_uart0), + FUNCTION(blsp0_uart1), + FUNCTION(blsp1_i2c0), + FUNCTION(blsp1_i2c1), + FUNCTION(blsp1_spi0), + FUNCTION(blsp1_spi1), + FUNCTION(blsp1_uart0), + FUNCTION(blsp1_uart1), + FUNCTION(blsp1_uart2), + FUNCTION(blsp2_i2c0), + FUNCTION(blsp2_i2c1), + FUNCTION(blsp2_spi), + FUNCTION(blsp2_spi0), + FUNCTION(blsp2_spi1), + FUNCTION(btss), + FUNCTION(burn0), + FUNCTION(burn1), + FUNCTION(cri_trng), + FUNCTION(cri_trng0), + FUNCTION(cri_trng1), + FUNCTION(cxc_clk), + FUNCTION(cxc_data), + FUNCTION(dbg_out), + FUNCTION(eud_gpio), + FUNCTION(gcc_plltest), + FUNCTION(gcc_tlmm), + FUNCTION(gpio), + FUNCTION(led0), + FUNCTION(led2), + FUNCTION(mac0), + FUNCTION(mac1), + FUNCTION(mdc), + FUNCTION(mdio), + FUNCTION(pcie0_clk), + FUNCTION(pcie0_wake), + FUNCTION(pcie1_clk), + FUNCTION(pcie1_wake), + FUNCTION(pll_test), + FUNCTION(prng_rosc), + FUNCTION(pwm0), + FUNCTION(pwm1), + FUNCTION(pwm2), + FUNCTION(pwm3), + FUNCTION(qdss_cti_trig_in_a0), + FUNCTION(qdss_cti_trig_in_a1), + FUNCTION(qdss_cti_trig_in_b0), + FUNCTION(qdss_cti_trig_in_b1), + FUNCTION(qdss_cti_trig_out_a0), + FUNCTION(qdss_cti_trig_out_a1), + FUNCTION(qdss_cti_trig_out_b0), + FUNCTION(qdss_cti_trig_out_b1), + FUNCTION(qdss_traceclk_a), + FUNCTION(qdss_traceclk_b), + FUNCTION(qdss_tracectl_a), + FUNCTION(qdss_tracectl_b), + FUNCTION(qdss_tracedata_a), + FUNCTION(qdss_tracedata_b), + FUNCTION(qspi_clk), + FUNCTION(qspi_cs), + FUNCTION(qspi_data), + FUNCTION(reset_out), + FUNCTION(sdc1_clk), + FUNCTION(sdc1_cmd), + FUNCTION(sdc1_data), + FUNCTION(wci_txd), + FUNCTION(wci_rxd), + FUNCTION(wsa_swrm), + FUNCTION(wsi_clk3), + FUNCTION(wsi_data3), + FUNCTION(wsis_reset), + FUNCTION(xfem), +}; + +static const struct msm_pingroup ipq5018_groups[] = { + PINGROUP(0, atest_char, _, qdss_cti_trig_out_a0, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(1, atest_char, _, qdss_cti_trig_in_a0, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(2, atest_char, _, qdss_cti_trig_out_a1, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(3, atest_char, _, qdss_cti_trig_in_a1, wci_txd, wci_rxd, xfem, _, _, _), + PINGROUP(4, sdc1_data, qspi_data, blsp1_spi1, btss, dbg_out, qdss_traceclk_a, _, burn0, _), + PINGROUP(5, sdc1_data, qspi_data, cxc_clk, blsp1_spi1, blsp1_i2c1, btss, _, qdss_tracectl_a, _), + PINGROUP(6, sdc1_data, qspi_data, cxc_data, blsp1_spi1, blsp1_i2c1, btss, _, qdss_tracedata_a, _), + PINGROUP(7, sdc1_data, qspi_data, mac0, blsp1_spi1, btss, _, qdss_tracedata_a, _, _), + PINGROUP(8, sdc1_cmd, qspi_cs, mac1, btss, _, qdss_tracedata_a, _, _, _), + PINGROUP(9, sdc1_clk, qspi_clk, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(10, blsp0_spi, blsp1_uart0, led0, gcc_plltest, qdss_tracedata_a, _, _, _, _), + PINGROUP(11, blsp0_spi, blsp1_uart0, _, gcc_tlmm, qdss_tracedata_a, _, _, _, _), + PINGROUP(12, blsp0_spi, blsp0_i2c, blsp1_uart0, _, gcc_plltest, qdss_tracedata_a, _, _, _), + PINGROUP(13, blsp0_spi, blsp0_i2c, blsp1_uart0, _, qdss_tracedata_a, _, _, _, _), + PINGROUP(14, pcie0_clk, _, _, cri_trng0, qdss_tracedata_a, _, _, _, _), + PINGROUP(15, _, _, cri_trng1, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(16, pcie0_wake, _, _, cri_trng, qdss_tracedata_a, _, _, _, _), + PINGROUP(17, pcie1_clk, btss, _, prng_rosc, qdss_tracedata_a, _, _, _, _), + PINGROUP(18, blsp1_spi0, btss, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(19, pcie1_wake, blsp1_spi0, blsp1_i2c0, btss, _, qdss_tracedata_a, _, _, _), + PINGROUP(20, blsp0_uart0, blsp1_spi0, blsp1_i2c0, _, qdss_tracedata_a, _, _, _, _), + PINGROUP(21, blsp0_uart0, blsp1_spi0, _, qdss_tracedata_a, _, _, _, _, _), + PINGROUP(22, _, pll_test, eud_gpio, _, _, _, _, _, _), + PINGROUP(23, audio_rxmclk, audio_pdm0, audio_rxmclk, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(24, audio_rxbclk, audio_pdm0, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _, _), + PINGROUP(25, audio_rxfsync, audio_pdm1, blsp2_i2c1, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(26, audio_rxd, audio_pdm1, blsp2_i2c1, blsp2_spi1, blsp1_uart2, btss, _, qdss_tracedata_b, _), + PINGROUP(27, audio_txmclk, wsa_swrm, audio_txmclk, blsp2_spi, btss, _, qdss_tracedata_b, _, _), + PINGROUP(28, audio_txbclk, wsa_swrm, blsp0_uart1, btss, qdss_tracedata_b, _, _, _, _), + PINGROUP(29, audio_txfsync, _, blsp0_uart1, _, qdss_tracedata_b, _, _, _, _), + PINGROUP(30, audio_txd, led2, led0, _, _, _, _, _, _), + PINGROUP(31, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _, _), + PINGROUP(32, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _, _), + PINGROUP(33, blsp2_i2c0, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _), + PINGROUP(34, blsp2_i2c0, blsp2_spi0, blsp1_uart1, _, qdss_tracedata_b, eud_gpio, _, _, _), + PINGROUP(35, _, qdss_tracedata_b, eud_gpio, _, _, _, _, _, _), + PINGROUP(36, mdc, qdss_tracedata_b, _, wsi_clk3, _, _, _, _, _), + PINGROUP(37, mdio, atest_char, qdss_tracedata_b, _, wsi_data3, _, _, _, _), + PINGROUP(38, qdss_tracedata_b, _, _, _, _, _, _, _, _), + PINGROUP(39, qdss_traceclk_b, _, _, _, _, _, _, _, _), + PINGROUP(40, reset_out, qdss_tracectl_b, _, _, _, _, _, _, _), + PINGROUP(41, _, _, _, _, _, _, _, _, _), + PINGROUP(42, pwm0, qdss_cti_trig_out_b0, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(43, pwm1, qdss_cti_trig_in_b0, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(44, pwm2, qdss_cti_trig_out_b1, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(45, pwm3, qdss_cti_trig_in_b1, wci_txd, wci_rxd, xfem, _, _, _, _), + PINGROUP(46, led0, _, _, _, _, _, _, _, _), +}; + +static const struct msm_pinctrl_soc_data ipq5018_pinctrl = { + .pins = ipq5018_pins, + .npins = ARRAY_SIZE(ipq5018_pins), + .functions = ipq5018_functions, + .nfunctions = ARRAY_SIZE(ipq5018_functions), + .groups = ipq5018_groups, + .ngroups = ARRAY_SIZE(ipq5018_groups), + .ngpios = 47, +}; + +static int ipq5018_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &ipq5018_pinctrl); +} + +static const struct of_device_id ipq5018_pinctrl_of_match[] = { + { .compatible = "qcom,ipq5018-pinctrl", }, + { }, +}; + +static struct platform_driver ipq5018_pinctrl_driver = { + .driver = { + .name = "ipq5018-pinctrl", + .of_match_table = ipq5018_pinctrl_of_match, + }, + .probe = ipq5018_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init ipq5018_pinctrl_init(void) +{ + return platform_driver_register(&ipq5018_pinctrl_driver); +} +arch_initcall(ipq5018_pinctrl_init); + +static void __exit ipq5018_pinctrl_exit(void) +{ + platform_driver_unregister(&ipq5018_pinctrl_driver); +} +module_exit(ipq5018_pinctrl_exit); + +MODULE_DESCRIPTION("Qualcomm Technologies Inc ipq5018 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, ipq5018_pinctrl_of_match); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver 2022-06-21 16:11 ` Sricharan R @ 2022-06-24 3:54 ` Bjorn Andersson -1 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 3:54 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: [..] > + > +static const struct of_device_id ipq5018_pinctrl_of_match[] = { > + { .compatible = "qcom,ipq5018-pinctrl", }, Please make this qcom,ipq5018-tlmm, as requested in the binding. With that: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver @ 2022-06-24 3:54 ` Bjorn Andersson 0 siblings, 0 replies; 65+ messages in thread From: Bjorn Andersson @ 2022-06-24 3:54 UTC (permalink / raw) To: Sricharan R Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: [..] > + > +static const struct of_device_id ipq5018_pinctrl_of_match[] = { > + { .compatible = "qcom,ipq5018-pinctrl", }, Please make this qcom,ipq5018-tlmm, as requested in the binding. With that: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver 2022-06-24 3:54 ` Bjorn Andersson @ 2022-06-27 19:35 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-27 19:35 UTC (permalink / raw) To: Bjorn Andersson Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Thanks Bjorn for your review On 6/24/2022 9:24 AM, Bjorn Andersson wrote: > On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > [..] >> + >> +static const struct of_device_id ipq5018_pinctrl_of_match[] = { >> + { .compatible = "qcom,ipq5018-pinctrl", }, > Please make this qcom,ipq5018-tlmm, as requested in the binding. Sure will do. > > With that: > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks for that. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver @ 2022-06-27 19:35 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-27 19:35 UTC (permalink / raw) To: Bjorn Andersson Cc: agross, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Thanks Bjorn for your review On 6/24/2022 9:24 AM, Bjorn Andersson wrote: > On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote: > [..] >> + >> +static const struct of_device_id ipq5018_pinctrl_of_match[] = { >> + { .compatible = "qcom,ipq5018-pinctrl", }, > Please make this qcom,ipq5018-tlmm, as requested in the binding. Sure will do. > > With that: > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks for that. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver 2022-06-21 16:11 ` Sricharan R @ 2022-06-28 3:31 ` kernel test robot -1 siblings, 0 replies; 65+ messages in thread From: kernel test robot @ 2022-06-28 3:31 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Cc: llvm, kbuild-all Hi Sricharan, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next linusw-pinctrl/devel linus/master v5.19-rc4 next-20220627] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/intel-lab-lkp/linux/commits/Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220628/202206281113.juwklxoO-lkp@intel.com/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 016342e319fd31e41cf5ed16a6140a8ea2de74dd) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install arm64 cross compiling tool for clang build # apt-get install binutils-aarch64-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/5986a00923b330deb4c2c70e0d531507a19fb840 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 git checkout 5986a00923b330deb4c2c70e0d531507a19fb840 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash arch/arm64/kernel/ drivers/clk/qcom/ drivers/pinctrl/qcom/ If you fix the issue, kindly add following tag where applicable Reported-by: kernel test robot <lkp@intel.com> All warnings (new ones prefixed by >>): >> drivers/pinctrl/qcom/pinctrl-ipq5018.c:252:27: warning: unused variable '_groups' [-Wunused-const-variable] static const char * const _groups[] = { ^ 1 warning generated. vim +/_groups +252 drivers/pinctrl/qcom/pinctrl-ipq5018.c 251 > 252 static const char * const _groups[] = { 253 "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", 254 "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", 255 "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", 256 "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", 257 "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", 258 "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", 259 "gpio43", "gpio44", "gpio45", "gpio46", 260 }; 261 -- 0-DAY CI Kernel Test Service https://01.org/lkp ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver @ 2022-06-28 3:31 ` kernel test robot 0 siblings, 0 replies; 65+ messages in thread From: kernel test robot @ 2022-06-28 3:31 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Cc: llvm, kbuild-all Hi Sricharan, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next linusw-pinctrl/devel linus/master v5.19-rc4 next-20220627] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/intel-lab-lkp/linux/commits/Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220628/202206281113.juwklxoO-lkp@intel.com/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 016342e319fd31e41cf5ed16a6140a8ea2de74dd) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install arm64 cross compiling tool for clang build # apt-get install binutils-aarch64-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/5986a00923b330deb4c2c70e0d531507a19fb840 git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Sricharan-R/Add-minimal-boot-support-for-IPQ5018/20220622-001751 git checkout 5986a00923b330deb4c2c70e0d531507a19fb840 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash arch/arm64/kernel/ drivers/clk/qcom/ drivers/pinctrl/qcom/ If you fix the issue, kindly add following tag where applicable Reported-by: kernel test robot <lkp@intel.com> All warnings (new ones prefixed by >>): >> drivers/pinctrl/qcom/pinctrl-ipq5018.c:252:27: warning: unused variable '_groups' [-Wunused-const-variable] static const char * const _groups[] = { ^ 1 warning generated. vim +/_groups +252 drivers/pinctrl/qcom/pinctrl-ipq5018.c 251 > 252 static const char * const _groups[] = { 253 "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", 254 "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", 255 "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", 256 "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", 257 "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", 258 "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", 259 "gpio43", "gpio44", "gpio45", "gpio46", 260 }; 261 -- 0-DAY CI Kernel Test Service https://01.org/lkp _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Document the new ipq5018 SOC/board device tree bindings. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 129cdd246223..6665db9c9b28 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -29,6 +29,7 @@ description: | apq8074 apq8084 apq8096 + ipq5018 ipq6018 ipq8074 mdm9615 @@ -64,6 +65,7 @@ description: | hk10-c2 idp liquid + mp03 mtp qrd sbc @@ -198,6 +200,11 @@ properties: - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 + - items: + - enum: + - qcom,ipq5018-mp03 + - const: qcom,ipq5018 + - items: - enum: - qcom,ipq8064-ap148 -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Document the new ipq5018 SOC/board device tree bindings. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 129cdd246223..6665db9c9b28 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -29,6 +29,7 @@ description: | apq8074 apq8084 apq8096 + ipq5018 ipq6018 ipq8074 mdm9615 @@ -64,6 +65,7 @@ description: | hk10-c2 idp liquid + mp03 mtp qrd sbc @@ -198,6 +200,11 @@ properties: - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 + - items: + - enum: + - qcom,ipq5018-mp03 + - const: qcom,ipq5018 + - items: - enum: - qcom,ipq8064-ap148 -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings 2022-06-21 16:11 ` Sricharan R @ 2022-06-22 15:14 ` Krzysztof Kozlowski -1 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:14 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Document the new ipq5018 SOC/board device tree bindings. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Your chain is wrong. Since you send it, your SoB is the last. We have nice example for this: https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 Best regards, Krzysztof ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings @ 2022-06-22 15:14 ` Krzysztof Kozlowski 0 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:14 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Document the new ipq5018 SOC/board device tree bindings. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Your chain is wrong. Since you send it, your SoB is the last. We have nice example for this: https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings 2022-06-22 15:14 ` Krzysztof Kozlowski @ 2022-06-23 6:28 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:28 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:44 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Document the new ipq5018 SOC/board device tree bindings. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Your chain is wrong. Since you send it, your SoB is the last. We have > nice example for this: > > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 > sure, will fix it. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings @ 2022-06-23 6:28 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 6:28 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:44 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Document the new ipq5018 SOC/board device tree bindings. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Your chain is wrong. Since you send it, your SoB is the last. We have > nice example for this: > > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L473 > sure, will fix it. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add initial device tree support for the Qualcomm IPQ5018 SoC and MP03.1-C2 board. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f9e6343acd03..c44e701f093c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts new file mode 100644 index 000000000000..d1cd080ec3db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * IPQ5018 CP01 board device tree source + * + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi new file mode 100644 index 000000000000..084fb7b30dfd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ +/* + * IPQ5018 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + gen2clk0: gen2clk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "pcie20_phy0_pipe_clk"; + }; + + gen2clk1: gen2clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "pcie20_phy1_pipe_clk"; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + pmuv8: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz: tz@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x00400000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_1_pins: serial1-pinmux { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "blsp1_uart1"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq5018"; + reg = <0x01800000 0x80000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, /*GICD*/ + <0x0b002000 0x1000>, /*GICC*/ + <0x0b001000 0x1000>, /*GICH*/ + <0x0b004000 0x1000>; /*GICV*/ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + }; +}; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Add initial device tree support for the Qualcomm IPQ5018 SoC and MP03.1-C2 board. Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f9e6343acd03..c44e701f093c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts new file mode 100644 index 000000000000..d1cd080ec3db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * IPQ5018 CP01 board device tree source + * + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi new file mode 100644 index 000000000000..084fb7b30dfd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. + */ +/* + * IPQ5018 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + gen2clk0: gen2clk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "pcie20_phy0_pipe_clk"; + }; + + gen2clk1: gen2clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "pcie20_phy1_pipe_clk"; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + pmuv8: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz: tz@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x00400000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_1_pins: serial1-pinmux { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "blsp1_uart1"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq5018"; + reg = <0x01800000 0x80000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, /*GICD*/ + <0x0b002000 0x1000>, /*GICC*/ + <0x0b001000 0x1000>, /*GICH*/ + <0x0b004000 0x1000>; /*GICV*/ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + }; +}; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-21 16:11 ` Sricharan R @ 2022-06-22 15:18 ` Krzysztof Kozlowski -1 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:18 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5018 SoC and > MP03.1-C2 board. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Chain needs fixes. > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ > 3 files changed, 251 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f9e6343acd03..c44e701f093c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb This does not look like in proper order. > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > new file mode 100644 > index 000000000000..d1cd080ec3db > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 CP01 board device tree source > + * > + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5018.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; > + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; > + > + aliases { > + serial0 = &blsp1_uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart1 { > + pinctrl-0 = <&serial_1_pins>; > + pinctrl-names = "default"; > + status = "ok"; "okay" is preferred. > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > new file mode 100644 > index 000000000000..084fb7b30dfd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > +/* > + * IPQ5018 SoC device tree source > + * > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. Combine these two comments. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> > +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + xo: xo { Node name: xo-clk > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; The clock is provided by board, so at least frequency should be defined there. > + #clock-cells = <0>; > + }; > + > + gen2clk0: gen2clk0 { Keep consistent prefixes, so gen2-clk or gen2-0-clk > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy0_pipe_clk"; > + }; > + > + gen2clk1: gen2clk1 { gen2-1-clk > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy1_pipe_clk"; > + }; > + Best regards, Krzysztof ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-06-22 15:18 ` Krzysztof Kozlowski 0 siblings, 0 replies; 65+ messages in thread From: Krzysztof Kozlowski @ 2022-06-22 15:18 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21/06/2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5018 SoC and > MP03.1-C2 board. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Chain needs fixes. > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ > 3 files changed, 251 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f9e6343acd03..c44e701f093c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb This does not look like in proper order. > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > new file mode 100644 > index 000000000000..d1cd080ec3db > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 CP01 board device tree source > + * > + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5018.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; > + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; > + > + aliases { > + serial0 = &blsp1_uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart1 { > + pinctrl-0 = <&serial_1_pins>; > + pinctrl-names = "default"; > + status = "ok"; "okay" is preferred. > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > new file mode 100644 > index 000000000000..084fb7b30dfd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > +/* > + * IPQ5018 SoC device tree source > + * > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. Combine these two comments. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> > +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + xo: xo { Node name: xo-clk > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; The clock is provided by board, so at least frequency should be defined there. > + #clock-cells = <0>; > + }; > + > + gen2clk0: gen2clk0 { Keep consistent prefixes, so gen2-clk or gen2-0-clk > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy0_pipe_clk"; > + }; > + > + gen2clk1: gen2clk1 { gen2-1-clk > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy1_pipe_clk"; > + }; > + Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-22 15:18 ` Krzysztof Kozlowski @ 2022-06-23 7:19 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 7:19 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:48 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5018 SoC and >> MP03.1-C2 board. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Chain needs fixes. ok. >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >> 3 files changed, 251 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index f9e6343acd03..c44e701f093c 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb > This does not look like in proper order. ok, will fix. >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> new file mode 100644 >> index 000000000000..d1cd080ec3db >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> @@ -0,0 +1,29 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * IPQ5018 CP01 board device tree source >> + * >> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5018.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >> + >> + aliases { >> + serial0 = &blsp1_uart1; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart1 { >> + pinctrl-0 = <&serial_1_pins>; >> + pinctrl-names = "default"; >> + status = "ok"; > "okay" is preferred. ok. >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> new file mode 100644 >> index 000000000000..084fb7b30dfd >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -0,0 +1,221 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> +/* >> + * IPQ5018 SoC device tree source >> + * >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > Combine these two comments. ok. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + xo: xo { > Node name: xo-clk ok. >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; > The clock is provided by board, so at least frequency should be defined > there. ok, will move to board file. Somehow all other boards are defining it in soc dts itself, so followed it. >> + #clock-cells = <0>; >> + }; >> + >> + gen2clk0: gen2clk0 { > Keep consistent prefixes, so gen2-clk or gen2-0-clk ok, will fix. >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy0_pipe_clk"; >> + }; >> + >> + gen2clk1: gen2clk1 { > gen2-1-clk ok, will fix. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-06-23 7:19 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-23 7:19 UTC (permalink / raw) To: Krzysztof Kozlowski, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 6/22/2022 8:48 PM, Krzysztof Kozlowski wrote: > On 21/06/2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5018 SoC and >> MP03.1-C2 board. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > Chain needs fixes. ok. >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >> 3 files changed, 251 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index f9e6343acd03..c44e701f093c 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb > This does not look like in proper order. ok, will fix. >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> new file mode 100644 >> index 000000000000..d1cd080ec3db >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> @@ -0,0 +1,29 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * IPQ5018 CP01 board device tree source >> + * >> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5018.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >> + >> + aliases { >> + serial0 = &blsp1_uart1; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart1 { >> + pinctrl-0 = <&serial_1_pins>; >> + pinctrl-names = "default"; >> + status = "ok"; > "okay" is preferred. ok. >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> new file mode 100644 >> index 000000000000..084fb7b30dfd >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -0,0 +1,221 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> +/* >> + * IPQ5018 SoC device tree source >> + * >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > Combine these two comments. ok. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + xo: xo { > Node name: xo-clk ok. >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; > The clock is provided by board, so at least frequency should be defined > there. ok, will move to board file. Somehow all other boards are defining it in soc dts itself, so followed it. >> + #clock-cells = <0>; >> + }; >> + >> + gen2clk0: gen2clk0 { > Keep consistent prefixes, so gen2-clk or gen2-0-clk ok, will fix. >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy0_pipe_clk"; >> + }; >> + >> + gen2clk1: gen2clk1 { > gen2-1-clk ok, will fix. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-21 16:11 ` Sricharan R @ 2022-06-26 18:32 ` Konrad Dybcio -1 siblings, 0 replies; 65+ messages in thread From: Konrad Dybcio @ 2022-06-26 18:32 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21.06.2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5018 SoC and > MP03.1-C2 board. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ > 3 files changed, 251 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f9e6343acd03..c44e701f093c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > new file mode 100644 > index 000000000000..d1cd080ec3db > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 CP01 board device tree source > + * > + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5018.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; > + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; > + > + aliases { > + serial0 = &blsp1_uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart1 { > + pinctrl-0 = <&serial_1_pins>; > + pinctrl-names = "default"; > + status = "ok"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > new file mode 100644 > index 000000000000..084fb7b30dfd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > +/* > + * IPQ5018 SoC device tree source > + * > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> > +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; Hi! interrupt-parent could go first. > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + xo: xo { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + #clock-cells = <0>; > + }; > + > + gen2clk0: gen2clk0 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy0_pipe_clk"; > + }; > + > + gen2clk1: gen2clk1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy1_pipe_clk"; > + }; I am not sure what's the current stance on this, but previously clock nodes used to be wrapped in a clocks {} node, as currently they are not sorted properly. > + > + cpus: cpus { Is this label going to be used? > + #address-cells = <1>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + }; > + > + CPU1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + enable-method = "psci"; > + reg = <0x1>; > + next-level-cache = <&L2_0>; > + }; > + > + L2_0: l2-cache { > + compatible = "cache"; > + cache-level = <0x2>; This should probably be dec, as it's not a register. > + }; > + }; > + > + pmuv8: pmu { Are there any other PMUs? And is this label going to be used? > + compatible = "arm,cortex-a53-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; I think this can fit in a single 100-char line. > + }; > + > + psci: psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + memory@40000000 { This node is not sorted properly. > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x40000000 0x0 0x0>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + tz: tz@4ac00000 { Please rename it to tz_memory or tz_region or something more descriptive. Also, memory@ > + reg = <0x0 0x4ac00000 0x0 0x00400000>; I don't think we tend to pad size to 8 hex digits. > + no-map; > + }; > + }; > + > + timer { This is not sorted properly. > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + soc: soc@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; Isn't that the default value? > + compatible = "simple-bus"; Please sort the properties. > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5018-pinctrl"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 80>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + serial_1_pins: serial1-pinmux { Other DTs call it uart pins, also this is the default/poweron state but the hardware provides support for sleep/poweroff. Please rename this accordingly. > + pins = "gpio31", "gpio32", "gpio33", "gpio34"; > + function = "blsp1_uart1"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; > + > + gcc: clock-controller@1800000 { > + compatible = "qcom,gcc-ipq5018"; > + reg = <0x01800000 0x80000>; > + clocks = <&xo>, <&sleep_clk>; > + clock-names = "xo", "sleep_clk"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + blsp1_uart1: serial@78af000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x078af000 0x200>; > + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, > + <&gcc GCC_BLSP1_AHB_CLK>; Not sure whether thunderbird is dumb again, or the indentation is off by 1 space. > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; Please sort the properties (compatible and reg gotta go first, etc.). > + interrupt-controller; > + #interrupt-cells = <0x3>; *-cells should be decimal. > + reg = <0x0b000000 0x1000>, /*GICD*/ /* GICD */, please (and the next ones too) > + <0x0b002000 0x1000>, /*GICC*/ > + <0x0b001000 0x1000>, /*GICH*/ > + <0x0b004000 0x1000>; /*GICV*/ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + timer@b120000 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "arm,armv7-timer-mem"; > + reg = <0x0b120000 0x1000>; > + clock-frequency = <19200000>; Please sort the properties, also in subnodes. Konrad > + > + frame@b120000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b121000 0x1000>, > + <0x0b122000 0x1000>; > + }; > + > + frame@b123000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xb123000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b124000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b124000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b125000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b125000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b126000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b126000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b127000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b127000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b128000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b128000 0x1000>; > + status = "disabled"; > + }; > + }; > + }; > +}; > ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-06-26 18:32 ` Konrad Dybcio 0 siblings, 0 replies; 65+ messages in thread From: Konrad Dybcio @ 2022-06-26 18:32 UTC (permalink / raw) To: Sricharan R, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 21.06.2022 18:11, Sricharan R wrote: > From: Varadarajan Narayanan <quic_varada@quicinc.com> > > Add initial device tree support for the Qualcomm IPQ5018 SoC and > MP03.1-C2 board. > > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ > 3 files changed, 251 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f9e6343acd03..c44e701f093c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > new file mode 100644 > index 000000000000..d1cd080ec3db > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts > @@ -0,0 +1,29 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 CP01 board device tree source > + * > + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5018.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; > + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; > + > + aliases { > + serial0 = &blsp1_uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart1 { > + pinctrl-0 = <&serial_1_pins>; > + pinctrl-names = "default"; > + status = "ok"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > new file mode 100644 > index 000000000000..084fb7b30dfd > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. > + */ > +/* > + * IPQ5018 SoC device tree source > + * > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> > +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&intc>; Hi! interrupt-parent could go first. > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + > + xo: xo { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + #clock-cells = <0>; > + }; > + > + gen2clk0: gen2clk0 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy0_pipe_clk"; > + }; > + > + gen2clk1: gen2clk1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "pcie20_phy1_pipe_clk"; > + }; I am not sure what's the current stance on this, but previously clock nodes used to be wrapped in a clocks {} node, as currently they are not sorted properly. > + > + cpus: cpus { Is this label going to be used? > + #address-cells = <1>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + }; > + > + CPU1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + enable-method = "psci"; > + reg = <0x1>; > + next-level-cache = <&L2_0>; > + }; > + > + L2_0: l2-cache { > + compatible = "cache"; > + cache-level = <0x2>; This should probably be dec, as it's not a register. > + }; > + }; > + > + pmuv8: pmu { Are there any other PMUs? And is this label going to be used? > + compatible = "arm,cortex-a53-pmu"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | > + IRQ_TYPE_LEVEL_HIGH)>; I think this can fit in a single 100-char line. > + }; > + > + psci: psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + memory@40000000 { This node is not sorted properly. > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x40000000 0x0 0x0>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + tz: tz@4ac00000 { Please rename it to tz_memory or tz_region or something more descriptive. Also, memory@ > + reg = <0x0 0x4ac00000 0x0 0x00400000>; I don't think we tend to pad size to 8 hex digits. > + no-map; > + }; > + }; > + > + timer { This is not sorted properly. > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + soc: soc@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; Isn't that the default value? > + compatible = "simple-bus"; Please sort the properties. > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq5018-pinctrl"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 80>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + serial_1_pins: serial1-pinmux { Other DTs call it uart pins, also this is the default/poweron state but the hardware provides support for sleep/poweroff. Please rename this accordingly. > + pins = "gpio31", "gpio32", "gpio33", "gpio34"; > + function = "blsp1_uart1"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; > + > + gcc: clock-controller@1800000 { > + compatible = "qcom,gcc-ipq5018"; > + reg = <0x01800000 0x80000>; > + clocks = <&xo>, <&sleep_clk>; > + clock-names = "xo", "sleep_clk"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + blsp1_uart1: serial@78af000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x078af000 0x200>; > + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, > + <&gcc GCC_BLSP1_AHB_CLK>; Not sure whether thunderbird is dumb again, or the indentation is off by 1 space. > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; Please sort the properties (compatible and reg gotta go first, etc.). > + interrupt-controller; > + #interrupt-cells = <0x3>; *-cells should be decimal. > + reg = <0x0b000000 0x1000>, /*GICD*/ /* GICD */, please (and the next ones too) > + <0x0b002000 0x1000>, /*GICC*/ > + <0x0b001000 0x1000>, /*GICH*/ > + <0x0b004000 0x1000>; /*GICV*/ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + timer@b120000 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "arm,armv7-timer-mem"; > + reg = <0x0b120000 0x1000>; > + clock-frequency = <19200000>; Please sort the properties, also in subnodes. Konrad > + > + frame@b120000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b121000 0x1000>, > + <0x0b122000 0x1000>; > + }; > + > + frame@b123000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xb123000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b124000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b124000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b125000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b125000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b126000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b126000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b127000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b127000 0x1000>; > + status = "disabled"; > + }; > + > + frame@b128000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0b128000 0x1000>; > + status = "disabled"; > + }; > + }; > + }; > +}; > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-26 18:32 ` Konrad Dybcio @ 2022-06-28 7:14 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-28 7:14 UTC (permalink / raw) To: Konrad Dybcio, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Thanks Konrad for the review. On 6/27/2022 12:02 AM, Konrad Dybcio wrote: > > On 21.06.2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5018 SoC and >> MP03.1-C2 board. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >> 3 files changed, 251 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index f9e6343acd03..c44e701f093c 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> new file mode 100644 >> index 000000000000..d1cd080ec3db >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> @@ -0,0 +1,29 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * IPQ5018 CP01 board device tree source >> + * >> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5018.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >> + >> + aliases { >> + serial0 = &blsp1_uart1; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart1 { >> + pinctrl-0 = <&serial_1_pins>; >> + pinctrl-names = "default"; >> + status = "ok"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> new file mode 100644 >> index 000000000000..084fb7b30dfd >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -0,0 +1,221 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> +/* >> + * IPQ5018 SoC device tree source >> + * >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; > Hi! > > interrupt-parent could go first. ok. >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + xo: xo { >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + #clock-cells = <0>; >> + }; >> + >> + gen2clk0: gen2clk0 { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy0_pipe_clk"; >> + }; >> + >> + gen2clk1: gen2clk1 { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy1_pipe_clk"; >> + }; > I am not sure what's the current stance on this, but previously clock nodes > used to be wrapped in a clocks {} node, as currently they are not sorted > properly. > hmm ok, yeah, see the clocks { node in some recent dts as well, will add the wrapper. >> + >> + cpus: cpus { > Is this label going to be used? hmm, not used, will remove. >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + enable-method = "psci"; >> + reg = <0x1>; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + L2_0: l2-cache { >> + compatible = "cache"; >> + cache-level = <0x2>; > This should probably be dec, as it's not a register. 'dec' ? Sorry, i did not get that. >> + }; >> + }; >> + >> + pmuv8: pmu { > Are there any other PMUs? And is this label going to be used? ok, will remove the label. >> + compatible = "arm,cortex-a53-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | >> + IRQ_TYPE_LEVEL_HIGH)>; > I think this can fit in a single 100-char line. > ok. >> + }; >> + >> + psci: psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + memory@40000000 { > This node is not sorted properly. ok, will sort for all nodes. >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x40000000 0x0 0x0>; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz: tz@4ac00000 { > Please rename it to tz_memory or tz_region or something more > descriptive. Also, memory@ ok. >> + reg = <0x0 0x4ac00000 0x0 0x00400000>; > I don't think we tend to pad size to 8 hex digits. ok. >> + no-map; >> + }; >> + }; >> + >> + timer { > This is not sorted properly. ok. >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + }; >> + >> + soc: soc@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0xffffffff>; > Isn't that the default value? ok, if omitting this would be retain the default, then will do it. >> + compatible = "simple-bus"; > Please sort the properties. ok. >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq5018-pinctrl"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 80>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + serial_1_pins: serial1-pinmux { > Other DTs call it uart pins, also this is the default/poweron > state but the hardware provides support for sleep/poweroff. > Please rename this accordingly. ok. >> + pins = "gpio31", "gpio32", "gpio33", "gpio34"; >> + function = "blsp1_uart1"; >> + drive-strength = <8>; >> + bias-pull-down; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,gcc-ipq5018"; >> + reg = <0x01800000 0x80000>; >> + clocks = <&xo>, <&sleep_clk>; >> + clock-names = "xo", "sleep_clk"; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + }; >> + >> + blsp1_uart1: serial@78af000 { >> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >> + reg = <0x078af000 0x200>; >> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, >> + <&gcc GCC_BLSP1_AHB_CLK>; > Not sure whether thunderbird is dumb again, or the indentation > is off by 1 space. indentation issue, will fix. >> + clock-names = "core", "iface"; >> + status = "disabled"; >> + }; >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; > Please sort the properties (compatible and reg gotta go first, etc.). ok. >> + interrupt-controller; >> + #interrupt-cells = <0x3>; > *-cells should be decimal. > ok. >> + reg = <0x0b000000 0x1000>, /*GICD*/ > /* GICD */, please (and the next ones too) ok. >> + <0x0b002000 0x1000>, /*GICC*/ >> + <0x0b001000 0x1000>, /*GICH*/ >> + <0x0b004000 0x1000>; /*GICV*/ >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + timer@b120000 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + compatible = "arm,armv7-timer-mem"; >> + reg = <0x0b120000 0x1000>; >> + clock-frequency = <19200000>; > Please sort the properties, also in subnodes. ok, will do. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-06-28 7:14 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-28 7:14 UTC (permalink / raw) To: Konrad Dybcio, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Thanks Konrad for the review. On 6/27/2022 12:02 AM, Konrad Dybcio wrote: > > On 21.06.2022 18:11, Sricharan R wrote: >> From: Varadarajan Narayanan <quic_varada@quicinc.com> >> >> Add initial device tree support for the Qualcomm IPQ5018 SoC and >> MP03.1-C2 board. >> >> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >> 3 files changed, 251 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index f9e6343acd03..c44e701f093c 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> new file mode 100644 >> index 000000000000..d1cd080ec3db >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >> @@ -0,0 +1,29 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * IPQ5018 CP01 board device tree source >> + * >> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5018.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >> + >> + aliases { >> + serial0 = &blsp1_uart1; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart1 { >> + pinctrl-0 = <&serial_1_pins>; >> + pinctrl-names = "default"; >> + status = "ok"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> new file mode 100644 >> index 000000000000..084fb7b30dfd >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -0,0 +1,221 @@ >> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >> +/* >> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >> + */ >> +/* >> + * IPQ5018 SoC device tree source >> + * >> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >> + >> +/ { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&intc>; > Hi! > > interrupt-parent could go first. ok. >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <32000>; >> + #clock-cells = <0>; >> + }; >> + >> + xo: xo { >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + #clock-cells = <0>; >> + }; >> + >> + gen2clk0: gen2clk0 { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy0_pipe_clk"; >> + }; >> + >> + gen2clk1: gen2clk1 { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "pcie20_phy1_pipe_clk"; >> + }; > I am not sure what's the current stance on this, but previously clock nodes > used to be wrapped in a clocks {} node, as currently they are not sorted > properly. > hmm ok, yeah, see the clocks { node in some recent dts as well, will add the wrapper. >> + >> + cpus: cpus { > Is this label going to be used? hmm, not used, will remove. >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + reg = <0x0>; >> + enable-method = "psci"; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + CPU1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53"; >> + enable-method = "psci"; >> + reg = <0x1>; >> + next-level-cache = <&L2_0>; >> + }; >> + >> + L2_0: l2-cache { >> + compatible = "cache"; >> + cache-level = <0x2>; > This should probably be dec, as it's not a register. 'dec' ? Sorry, i did not get that. >> + }; >> + }; >> + >> + pmuv8: pmu { > Are there any other PMUs? And is this label going to be used? ok, will remove the label. >> + compatible = "arm,cortex-a53-pmu"; >> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | >> + IRQ_TYPE_LEVEL_HIGH)>; > I think this can fit in a single 100-char line. > ok. >> + }; >> + >> + psci: psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + }; >> + >> + memory@40000000 { > This node is not sorted properly. ok, will sort for all nodes. >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x40000000 0x0 0x0>; >> + }; >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + tz: tz@4ac00000 { > Please rename it to tz_memory or tz_region or something more > descriptive. Also, memory@ ok. >> + reg = <0x0 0x4ac00000 0x0 0x00400000>; > I don't think we tend to pad size to 8 hex digits. ok. >> + no-map; >> + }; >> + }; >> + >> + timer { > This is not sorted properly. ok. >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + }; >> + >> + soc: soc@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0xffffffff>; > Isn't that the default value? ok, if omitting this would be retain the default, then will do it. >> + compatible = "simple-bus"; > Please sort the properties. ok. >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq5018-pinctrl"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 80>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + serial_1_pins: serial1-pinmux { > Other DTs call it uart pins, also this is the default/poweron > state but the hardware provides support for sleep/poweroff. > Please rename this accordingly. ok. >> + pins = "gpio31", "gpio32", "gpio33", "gpio34"; >> + function = "blsp1_uart1"; >> + drive-strength = <8>; >> + bias-pull-down; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,gcc-ipq5018"; >> + reg = <0x01800000 0x80000>; >> + clocks = <&xo>, <&sleep_clk>; >> + clock-names = "xo", "sleep_clk"; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + }; >> + >> + blsp1_uart1: serial@78af000 { >> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >> + reg = <0x078af000 0x200>; >> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, >> + <&gcc GCC_BLSP1_AHB_CLK>; > Not sure whether thunderbird is dumb again, or the indentation > is off by 1 space. indentation issue, will fix. >> + clock-names = "core", "iface"; >> + status = "disabled"; >> + }; >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; > Please sort the properties (compatible and reg gotta go first, etc.). ok. >> + interrupt-controller; >> + #interrupt-cells = <0x3>; > *-cells should be decimal. > ok. >> + reg = <0x0b000000 0x1000>, /*GICD*/ > /* GICD */, please (and the next ones too) ok. >> + <0x0b002000 0x1000>, /*GICC*/ >> + <0x0b001000 0x1000>, /*GICH*/ >> + <0x0b004000 0x1000>; /*GICV*/ >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + timer@b120000 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + compatible = "arm,armv7-timer-mem"; >> + reg = <0x0b120000 0x1000>; >> + clock-frequency = <19200000>; > Please sort the properties, also in subnodes. ok, will do. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support 2022-06-28 7:14 ` Sricharan Ramabadhran @ 2022-07-01 7:31 ` Konrad Dybcio -1 siblings, 0 replies; 65+ messages in thread From: Konrad Dybcio @ 2022-07-01 7:31 UTC (permalink / raw) To: Sricharan Ramabadhran, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 28.06.2022 09:14, Sricharan Ramabadhran wrote: > Thanks Konrad for the review. > > On 6/27/2022 12:02 AM, Konrad Dybcio wrote: >> >> On 21.06.2022 18:11, Sricharan R wrote: >>> From: Varadarajan Narayanan <quic_varada@quicinc.com> >>> >>> Add initial device tree support for the Qualcomm IPQ5018 SoC and >>> MP03.1-C2 board. >>> >>> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >>> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/Makefile | 1 + >>> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >>> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >>> 3 files changed, 251 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index f9e6343acd03..c44e701f093c 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> new file mode 100644 >>> index 000000000000..d1cd080ec3db >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> @@ -0,0 +1,29 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >>> +/* >>> + * IPQ5018 CP01 board device tree source >>> + * >>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include "ipq5018.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >>> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >>> + >>> + aliases { >>> + serial0 = &blsp1_uart1; >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> +}; >>> + >>> +&blsp1_uart1 { >>> + pinctrl-0 = <&serial_1_pins>; >>> + pinctrl-names = "default"; >>> + status = "ok"; >>> +}; >>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> new file mode 100644 >>> index 000000000000..084fb7b30dfd >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> @@ -0,0 +1,221 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >>> +/* >>> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >>> + */ >>> +/* >>> + * IPQ5018 SoC device tree source >>> + * >>> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >>> + */ >>> + >>> +#include <dt-bindings/interrupt-controller/arm-gic.h> >>> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >>> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >>> + >>> +/ { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + interrupt-parent = <&intc>; >> Hi! >> >> interrupt-parent could go first. > > ok. > > >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + xo: xo { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <24000000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + gen2clk0: gen2clk0 { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <125000000>; >>> + clock-output-names = "pcie20_phy0_pipe_clk"; >>> + }; >>> + >>> + gen2clk1: gen2clk1 { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <125000000>; >>> + clock-output-names = "pcie20_phy1_pipe_clk"; >>> + }; >> I am not sure what's the current stance on this, but previously clock nodes >> used to be wrapped in a clocks {} node, as currently they are not sorted >> properly. >> > hmm ok, yeah, see the clocks { node in some recent dts as well, will add the wrapper. > > >>> + >>> + cpus: cpus { >> Is this label going to be used? > hmm, not used, will remove. >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + CPU0: cpu@0 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x0>; >>> + enable-method = "psci"; >>> + next-level-cache = <&L2_0>; >>> + }; >>> + >>> + CPU1: cpu@1 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a53"; >>> + enable-method = "psci"; >>> + reg = <0x1>; >>> + next-level-cache = <&L2_0>; >>> + }; >>> + >>> + L2_0: l2-cache { >>> + compatible = "cache"; >>> + cache-level = <0x2>; >> This should probably be dec, as it's not a register. > > 'dec' ? Sorry, i did not get that. Short for decimal. Konrad [snip] ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support @ 2022-07-01 7:31 ` Konrad Dybcio 0 siblings, 0 replies; 65+ messages in thread From: Konrad Dybcio @ 2022-07-01 7:31 UTC (permalink / raw) To: Sricharan Ramabadhran, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On 28.06.2022 09:14, Sricharan Ramabadhran wrote: > Thanks Konrad for the review. > > On 6/27/2022 12:02 AM, Konrad Dybcio wrote: >> >> On 21.06.2022 18:11, Sricharan R wrote: >>> From: Varadarajan Narayanan <quic_varada@quicinc.com> >>> >>> Add initial device tree support for the Qualcomm IPQ5018 SoC and >>> MP03.1-C2 board. >>> >>> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> >>> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> >>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/Makefile | 1 + >>> .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +++ >>> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 ++++++++++++++++++ >>> 3 files changed, 251 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index f9e6343acd03..c44e701f093c 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> new file mode 100644 >>> index 000000000000..d1cd080ec3db >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts >>> @@ -0,0 +1,29 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >>> +/* >>> + * IPQ5018 CP01 board device tree source >>> + * >>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include "ipq5018.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03-C2"; >>> + compatible = "qcom,ipq5018-mp03", "qcom,ipq5018"; >>> + >>> + aliases { >>> + serial0 = &blsp1_uart1; >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> +}; >>> + >>> +&blsp1_uart1 { >>> + pinctrl-0 = <&serial_1_pins>; >>> + pinctrl-names = "default"; >>> + status = "ok"; >>> +}; >>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> new file mode 100644 >>> index 000000000000..084fb7b30dfd >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> @@ -0,0 +1,221 @@ >>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause >>> +/* >>> + * Copyright (c) 2017-2021, The Linux Foundation. All rights reserved. >>> + */ >>> +/* >>> + * IPQ5018 SoC device tree source >>> + * >>> + * Copyright (c) 2019, The Linux Foundation. All rights reserved. >>> + */ >>> + >>> +#include <dt-bindings/interrupt-controller/arm-gic.h> >>> +#include <dt-bindings/clock/qcom,gcc-ipq5018.h> >>> +#include <dt-bindings/reset/qcom,gcc-ipq5018.h> >>> + >>> +/ { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + interrupt-parent = <&intc>; >> Hi! >> >> interrupt-parent could go first. > > ok. > > >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + xo: xo { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <24000000>; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + gen2clk0: gen2clk0 { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <125000000>; >>> + clock-output-names = "pcie20_phy0_pipe_clk"; >>> + }; >>> + >>> + gen2clk1: gen2clk1 { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <125000000>; >>> + clock-output-names = "pcie20_phy1_pipe_clk"; >>> + }; >> I am not sure what's the current stance on this, but previously clock nodes >> used to be wrapped in a clocks {} node, as currently they are not sorted >> properly. >> > hmm ok, yeah, see the clocks { node in some recent dts as well, will add the wrapper. > > >>> + >>> + cpus: cpus { >> Is this label going to be used? > hmm, not used, will remove. >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + CPU0: cpu@0 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x0>; >>> + enable-method = "psci"; >>> + next-level-cache = <&L2_0>; >>> + }; >>> + >>> + CPU1: cpu@1 { >>> + device_type = "cpu"; >>> + compatible = "arm,cortex-a53"; >>> + enable-method = "psci"; >>> + reg = <0x1>; >>> + next-level-cache = <&L2_0>; >>> + }; >>> + >>> + L2_0: l2-cache { >>> + compatible = "cache"; >>> + cache-level = <0x2>; >> This should probably be dec, as it's not a register. > > 'dec' ? Sorry, i did not get that. Short for decimal. Konrad [snip] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* [PATCH V2 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs 2022-06-21 16:11 ` Sricharan R @ 2022-06-21 16:11 ` Sricharan R -1 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Enables clk & pinctrl related configs Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 50aa3d75ab4f..2534357107e4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -522,6 +522,7 @@ CONFIG_PINCTRL_IMX8DXL=y CONFIG_PINCTRL_IMX8ULP=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ5018=y CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y @@ -1012,6 +1013,8 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_APCC_MSM8996=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y +CONFIG_IPQ_GCC_5018=y +CONFIG_IPQ_APSS_5018=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y CONFIG_MSM_GCC_8916=y -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 65+ messages in thread
* [PATCH V2 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs @ 2022-06-21 16:11 ` Sricharan R 0 siblings, 0 replies; 65+ messages in thread From: Sricharan R @ 2022-06-21 16:11 UTC (permalink / raw) To: quic_srichara, agross, bjorn.andersson, robh+dt, krzysztof.kozlowski+dt, mturquette, sboyd, linus.walleij, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel From: Varadarajan Narayanan <quic_varada@quicinc.com> Enables clk & pinctrl related configs Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 50aa3d75ab4f..2534357107e4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -522,6 +522,7 @@ CONFIG_PINCTRL_IMX8DXL=y CONFIG_PINCTRL_IMX8ULP=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ5018=y CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y @@ -1012,6 +1013,8 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_APCC_MSM8996=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y +CONFIG_IPQ_GCC_5018=y +CONFIG_IPQ_APSS_5018=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y CONFIG_MSM_GCC_8916=y -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 65+ messages in thread
* Re: [PATCH V2 0/8] Add minimal boot support for IPQ5018 2022-06-21 16:11 ` Sricharan R @ 2022-06-28 12:55 ` Linus Walleij -1 siblings, 0 replies; 65+ messages in thread From: Linus Walleij @ 2022-06-28 12:55 UTC (permalink / raw) To: Sricharan R, Bjorn Andersson, Krzysztof Kozlowski Cc: agross, robh+dt, mturquette, sboyd, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, > Gateways and Access Points. > > This series adds minimal board boot support for ipq5018-mp03.1-c2 board. Pretty cool! > dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings > pinctrl: qcom: Add IPQ5018 pinctrl driver I'm happy to merge the two pinctrl patches separately to the pinctrl tree if I can get a review from Bjorn or Krzysztof. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 0/8] Add minimal boot support for IPQ5018 @ 2022-06-28 12:55 ` Linus Walleij 0 siblings, 0 replies; 65+ messages in thread From: Linus Walleij @ 2022-06-28 12:55 UTC (permalink / raw) To: Sricharan R, Bjorn Andersson, Krzysztof Kozlowski Cc: agross, robh+dt, mturquette, sboyd, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, > Gateways and Access Points. > > This series adds minimal board boot support for ipq5018-mp03.1-c2 board. Pretty cool! > dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings > pinctrl: qcom: Add IPQ5018 pinctrl driver I'm happy to merge the two pinctrl patches separately to the pinctrl tree if I can get a review from Bjorn or Krzysztof. Yours, Linus Walleij _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 0/8] Add minimal boot support for IPQ5018 2022-06-28 12:55 ` Linus Walleij @ 2022-06-29 6:51 ` Sricharan Ramabadhran -1 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-29 6:51 UTC (permalink / raw) To: Linus Walleij, Bjorn Andersson, Krzysztof Kozlowski Cc: agross, robh+dt, mturquette, sboyd, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Hi Linus, On 6/28/2022 6:25 PM, Linus Walleij wrote: > On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > >> The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, >> Gateways and Access Points. >> >> This series adds minimal board boot support for ipq5018-mp03.1-c2 board. > Pretty cool! > >> dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings >> pinctrl: qcom: Add IPQ5018 pinctrl driver > I'm happy to merge the two pinctrl patches separately to the pinctrl > tree if I can get a review from Bjorn or Krzysztof. Thanks. Have few review comments from Bjorn and Krzysztof on the bindings. Will post V3 and hopefully that should have their acks on that. Regards, Sricharan ^ permalink raw reply [flat|nested] 65+ messages in thread
* Re: [PATCH V2 0/8] Add minimal boot support for IPQ5018 @ 2022-06-29 6:51 ` Sricharan Ramabadhran 0 siblings, 0 replies; 65+ messages in thread From: Sricharan Ramabadhran @ 2022-06-29 6:51 UTC (permalink / raw) To: Linus Walleij, Bjorn Andersson, Krzysztof Kozlowski Cc: agross, robh+dt, mturquette, sboyd, catalin.marinas, p.zabel, quic_varada, linux-arm-msm, devicetree, linux-kernel, linux-clk, linux-gpio, linux-arm-kernel Hi Linus, On 6/28/2022 6:25 PM, Linus Walleij wrote: > On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > >> The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, >> Gateways and Access Points. >> >> This series adds minimal board boot support for ipq5018-mp03.1-c2 board. > Pretty cool! > >> dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings >> pinctrl: qcom: Add IPQ5018 pinctrl driver > I'm happy to merge the two pinctrl patches separately to the pinctrl > tree if I can get a review from Bjorn or Krzysztof. Thanks. Have few review comments from Bjorn and Krzysztof on the bindings. Will post V3 and hopefully that should have their acks on that. Regards, Sricharan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 65+ messages in thread
end of thread, other threads:[~2022-07-01 7:32 UTC | newest] Thread overview: 65+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-06-21 16:11 [PATCH V2 0/8] Add minimal boot support for IPQ5018 Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-21 16:11 ` [PATCH V2 1/8] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-21 16:11 ` [PATCH V2 2/8] dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-22 15:04 ` Krzysztof Kozlowski 2022-06-22 15:04 ` Krzysztof Kozlowski 2022-06-23 6:00 ` Sricharan Ramabadhran 2022-06-23 6:00 ` Sricharan Ramabadhran 2022-06-24 17:26 ` Rob Herring 2022-06-24 17:26 ` Rob Herring 2022-06-21 16:11 ` [PATCH V2 3/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Sricharan R 2022-06-22 15:08 ` Krzysztof Kozlowski 2022-06-22 15:08 ` Krzysztof Kozlowski 2022-06-23 6:06 ` Sricharan Ramabadhran 2022-06-23 6:06 ` Sricharan Ramabadhran 2022-06-24 4:05 ` Bjorn Andersson 2022-06-24 4:05 ` Bjorn Andersson 2022-06-27 19:51 ` Sricharan Ramabadhran 2022-06-27 19:51 ` Sricharan Ramabadhran 2022-06-28 1:28 ` kernel test robot 2022-06-28 1:28 ` kernel test robot 2022-06-21 16:11 ` [PATCH V2 4/8] dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-22 15:13 ` Krzysztof Kozlowski 2022-06-22 15:13 ` Krzysztof Kozlowski 2022-06-23 6:28 ` Sricharan Ramabadhran 2022-06-23 6:28 ` Sricharan Ramabadhran 2022-06-24 3:44 ` Bjorn Andersson 2022-06-24 3:44 ` Bjorn Andersson 2022-06-24 17:26 ` Rob Herring 2022-06-24 17:26 ` Rob Herring 2022-06-21 16:11 ` [PATCH V2 5/8] pinctrl: qcom: Add IPQ5018 pinctrl driver Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-24 3:54 ` Bjorn Andersson 2022-06-24 3:54 ` Bjorn Andersson 2022-06-27 19:35 ` Sricharan Ramabadhran 2022-06-27 19:35 ` Sricharan Ramabadhran 2022-06-28 3:31 ` kernel test robot 2022-06-28 3:31 ` kernel test robot 2022-06-21 16:11 ` [PATCH V2 6/8] dt-bindings: qcom: Add ipq5018 bindings Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-22 15:14 ` Krzysztof Kozlowski 2022-06-22 15:14 ` Krzysztof Kozlowski 2022-06-23 6:28 ` Sricharan Ramabadhran 2022-06-23 6:28 ` Sricharan Ramabadhran 2022-06-21 16:11 ` [PATCH V2 7/8] arm64: dts: Add ipq5018 SoC and MP03 board support Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-22 15:18 ` Krzysztof Kozlowski 2022-06-22 15:18 ` Krzysztof Kozlowski 2022-06-23 7:19 ` Sricharan Ramabadhran 2022-06-23 7:19 ` Sricharan Ramabadhran 2022-06-26 18:32 ` Konrad Dybcio 2022-06-26 18:32 ` Konrad Dybcio 2022-06-28 7:14 ` Sricharan Ramabadhran 2022-06-28 7:14 ` Sricharan Ramabadhran 2022-07-01 7:31 ` Konrad Dybcio 2022-07-01 7:31 ` Konrad Dybcio 2022-06-21 16:11 ` [PATCH V2 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs Sricharan R 2022-06-21 16:11 ` Sricharan R 2022-06-28 12:55 ` [PATCH V2 0/8] Add minimal boot support for IPQ5018 Linus Walleij 2022-06-28 12:55 ` Linus Walleij 2022-06-29 6:51 ` Sricharan Ramabadhran 2022-06-29 6:51 ` Sricharan Ramabadhran
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.