[PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Sascha Hauer]

This is v4 of adding RK356x VOP2 support. Due to popular demand I added
a changelog to each patch, at least starting with changes to v3, I
didn't care to add the older changes as well. I hopefully integrated all
feedback I received to v3. Additionally I added some patches to the HDMI
driver to support resolutions up to 4k@60Hz. The patches are mostly
taken from the downstream kernel. Some have been send to public lists,
but were never applied upstream for reasons I do not know. The patches
are a bit more intrusive than needed for my case, but are present in the
downstream kernel for a long time, so I decided just to take them
instead of stripping them down to my needs. With these patches I
successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
I hope this is due to my low quality cable.

Sascha

Changes since v3:
- added changelog to each patch
- Add 4k support to hdmi driver
- rebase on v5.17-rc1

Changes since v2:
- Add pin names to HDMI supply pin description
- Add hclk support to HDMI driver
- Dual license rockchip-vop2 binding, update binding
- Add HDMI connector to board dts files
- drop unnecessary gamma_lut registers from vop2
- Update dclk_vop[012] clock handling, no longer hacks needed
- Complete regmap conversion

Changes since v1:
- drop all unnecessary waiting for frames within atomic modeset and plane update
- Cluster subwin support removed
- gamma support removed
- unnecessary irq_lock removed
- interrupt handling simplified
- simplified zpos handling
- drop is_alpha_support(), use fb->format->has_alpha instead
- use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
- Use fixed number of planes per video port
- Drop homegrown regmap code from vop2 driver (not complete yet)
- Add separate include file for vop2 driver to not pollute the vop include

Andy Yan (1):
  drm: rockchip: Add VOP2 driver

Benjamin Gaignard (1):
  dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
    HDMI

Douglas Anderson (2):
  drm/rockchip: dw_hdmi: Use auto-generated tables
  drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

Michael Riesch (1):
  arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

Nickey Yang (1):
  drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

Sascha Hauer (21):
  drm/encoder: Add of_graph port to struct drm_encoder
  drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
  drm/rockchip: dw_hdmi: rename vpll clock to reference clock
  drm/rockchip: dw_hdmi: add rk3568 support
  drm/rockchip: dw_hdmi: add regulator support
  drm/rockchip: dw_hdmi: Add support for hclk
  drm/rockchip: dw_hdmi: drop mode_valid hook
  clk: rockchip: rk3568: Add more PLL rates
  dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
  dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
  dt-bindings: display: rockchip: dw-hdmi: Add regulator support
  dt-bindings: display: rockchip: dw-hdmi: Add additional clock
  dt-bindings: display: rockchip: Add binding for VOP2
  arm64: dts: rockchip: rk3399: reorder hmdi clocks
  arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
  arm64: dts: rockchip: rk356x: Add VOP2 nodes
  arm64: dts: rockchip: rk356x: Add HDMI nodes
  arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
  clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
  clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
  drm/rockchip: Make VOP driver optional

 .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
 .../display/rockchip/rockchip-vop2.yaml       |  146 +
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
 drivers/clk/rockchip/clk-rk3568.c             |   14 +-
 drivers/gpu/drm/rockchip/Kconfig              |   14 +
 drivers/gpu/drm/rockchip/Makefile             |    4 +-
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
 include/drm/drm_encoder.h                     |    2 +
 include/dt-bindings/soc/rockchip,vop2.h       |   14 +
 21 files changed, 4039 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

-- 
2.30.2

[PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Sascha Hauer]

This is v4 of adding RK356x VOP2 support. Due to popular demand I added
a changelog to each patch, at least starting with changes to v3, I
didn't care to add the older changes as well. I hopefully integrated all
feedback I received to v3. Additionally I added some patches to the HDMI
driver to support resolutions up to 4k@60Hz. The patches are mostly
taken from the downstream kernel. Some have been send to public lists,
but were never applied upstream for reasons I do not know. The patches
are a bit more intrusive than needed for my case, but are present in the
downstream kernel for a long time, so I decided just to take them
instead of stripping them down to my needs. With these patches I
successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
I hope this is due to my low quality cable.

Sascha

Changes since v3:
- added changelog to each patch
- Add 4k support to hdmi driver
- rebase on v5.17-rc1

Changes since v2:
- Add pin names to HDMI supply pin description
- Add hclk support to HDMI driver
- Dual license rockchip-vop2 binding, update binding
- Add HDMI connector to board dts files
- drop unnecessary gamma_lut registers from vop2
- Update dclk_vop[012] clock handling, no longer hacks needed
- Complete regmap conversion

Changes since v1:
- drop all unnecessary waiting for frames within atomic modeset and plane update
- Cluster subwin support removed
- gamma support removed
- unnecessary irq_lock removed
- interrupt handling simplified
- simplified zpos handling
- drop is_alpha_support(), use fb->format->has_alpha instead
- use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
- Use fixed number of planes per video port
- Drop homegrown regmap code from vop2 driver (not complete yet)
- Add separate include file for vop2 driver to not pollute the vop include

Andy Yan (1):
  drm: rockchip: Add VOP2 driver

Benjamin Gaignard (1):
  dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
    HDMI

Douglas Anderson (2):
  drm/rockchip: dw_hdmi: Use auto-generated tables
  drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

Michael Riesch (1):
  arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

Nickey Yang (1):
  drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

Sascha Hauer (21):
  drm/encoder: Add of_graph port to struct drm_encoder
  drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
  drm/rockchip: dw_hdmi: rename vpll clock to reference clock
  drm/rockchip: dw_hdmi: add rk3568 support
  drm/rockchip: dw_hdmi: add regulator support
  drm/rockchip: dw_hdmi: Add support for hclk
  drm/rockchip: dw_hdmi: drop mode_valid hook
  clk: rockchip: rk3568: Add more PLL rates
  dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
  dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
  dt-bindings: display: rockchip: dw-hdmi: Add regulator support
  dt-bindings: display: rockchip: dw-hdmi: Add additional clock
  dt-bindings: display: rockchip: Add binding for VOP2
  arm64: dts: rockchip: rk3399: reorder hmdi clocks
  arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
  arm64: dts: rockchip: rk356x: Add VOP2 nodes
  arm64: dts: rockchip: rk356x: Add HDMI nodes
  arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
  clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
  clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
  drm/rockchip: Make VOP driver optional

 .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
 .../display/rockchip/rockchip-vop2.yaml       |  146 +
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
 drivers/clk/rockchip/clk-rk3568.c             |   14 +-
 drivers/gpu/drm/rockchip/Kconfig              |   14 +
 drivers/gpu/drm/rockchip/Makefile             |    4 +-
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
 include/drm/drm_encoder.h                     |    2 +
 include/dt-bindings/soc/rockchip,vop2.h       |   14 +
 21 files changed, 4039 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Sascha Hauer]

This is v4 of adding RK356x VOP2 support. Due to popular demand I added
a changelog to each patch, at least starting with changes to v3, I
didn't care to add the older changes as well. I hopefully integrated all
feedback I received to v3. Additionally I added some patches to the HDMI
driver to support resolutions up to 4k@60Hz. The patches are mostly
taken from the downstream kernel. Some have been send to public lists,
but were never applied upstream for reasons I do not know. The patches
are a bit more intrusive than needed for my case, but are present in the
downstream kernel for a long time, so I decided just to take them
instead of stripping them down to my needs. With these patches I
successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
I hope this is due to my low quality cable.

Sascha

Changes since v3:
- added changelog to each patch
- Add 4k support to hdmi driver
- rebase on v5.17-rc1

Changes since v2:
- Add pin names to HDMI supply pin description
- Add hclk support to HDMI driver
- Dual license rockchip-vop2 binding, update binding
- Add HDMI connector to board dts files
- drop unnecessary gamma_lut registers from vop2
- Update dclk_vop[012] clock handling, no longer hacks needed
- Complete regmap conversion

Changes since v1:
- drop all unnecessary waiting for frames within atomic modeset and plane update
- Cluster subwin support removed
- gamma support removed
- unnecessary irq_lock removed
- interrupt handling simplified
- simplified zpos handling
- drop is_alpha_support(), use fb->format->has_alpha instead
- use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
- Use fixed number of planes per video port
- Drop homegrown regmap code from vop2 driver (not complete yet)
- Add separate include file for vop2 driver to not pollute the vop include

Andy Yan (1):
  drm: rockchip: Add VOP2 driver

Benjamin Gaignard (1):
  dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
    HDMI

Douglas Anderson (2):
  drm/rockchip: dw_hdmi: Use auto-generated tables
  drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

Michael Riesch (1):
  arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

Nickey Yang (1):
  drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

Sascha Hauer (21):
  drm/encoder: Add of_graph port to struct drm_encoder
  drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
  drm/rockchip: dw_hdmi: rename vpll clock to reference clock
  drm/rockchip: dw_hdmi: add rk3568 support
  drm/rockchip: dw_hdmi: add regulator support
  drm/rockchip: dw_hdmi: Add support for hclk
  drm/rockchip: dw_hdmi: drop mode_valid hook
  clk: rockchip: rk3568: Add more PLL rates
  dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
  dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
  dt-bindings: display: rockchip: dw-hdmi: Add regulator support
  dt-bindings: display: rockchip: dw-hdmi: Add additional clock
  dt-bindings: display: rockchip: Add binding for VOP2
  arm64: dts: rockchip: rk3399: reorder hmdi clocks
  arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
  arm64: dts: rockchip: rk356x: Add VOP2 nodes
  arm64: dts: rockchip: rk356x: Add HDMI nodes
  arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
  clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
  clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
  drm/rockchip: Make VOP driver optional

 .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
 .../display/rockchip/rockchip-vop2.yaml       |  146 +
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
 drivers/clk/rockchip/clk-rk3568.c             |   14 +-
 drivers/gpu/drm/rockchip/Kconfig              |   14 +
 drivers/gpu/drm/rockchip/Makefile             |    4 +-
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
 include/drm/drm_encoder.h                     |    2 +
 include/dt-bindings/soc/rockchip,vop2.h       |   14 +
 21 files changed, 4039 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Sascha Hauer]

This is v4 of adding RK356x VOP2 support. Due to popular demand I added
a changelog to each patch, at least starting with changes to v3, I
didn't care to add the older changes as well. I hopefully integrated all
feedback I received to v3. Additionally I added some patches to the HDMI
driver to support resolutions up to 4k@60Hz. The patches are mostly
taken from the downstream kernel. Some have been send to public lists,
but were never applied upstream for reasons I do not know. The patches
are a bit more intrusive than needed for my case, but are present in the
downstream kernel for a long time, so I decided just to take them
instead of stripping them down to my needs. With these patches I
successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
I hope this is due to my low quality cable.

Sascha

Changes since v3:
- added changelog to each patch
- Add 4k support to hdmi driver
- rebase on v5.17-rc1

Changes since v2:
- Add pin names to HDMI supply pin description
- Add hclk support to HDMI driver
- Dual license rockchip-vop2 binding, update binding
- Add HDMI connector to board dts files
- drop unnecessary gamma_lut registers from vop2
- Update dclk_vop[012] clock handling, no longer hacks needed
- Complete regmap conversion

Changes since v1:
- drop all unnecessary waiting for frames within atomic modeset and plane update
- Cluster subwin support removed
- gamma support removed
- unnecessary irq_lock removed
- interrupt handling simplified
- simplified zpos handling
- drop is_alpha_support(), use fb->format->has_alpha instead
- use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
- Use fixed number of planes per video port
- Drop homegrown regmap code from vop2 driver (not complete yet)
- Add separate include file for vop2 driver to not pollute the vop include

Andy Yan (1):
  drm: rockchip: Add VOP2 driver

Benjamin Gaignard (1):
  dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
    HDMI

Douglas Anderson (2):
  drm/rockchip: dw_hdmi: Use auto-generated tables
  drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

Michael Riesch (1):
  arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

Nickey Yang (1):
  drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

Sascha Hauer (21):
  drm/encoder: Add of_graph port to struct drm_encoder
  drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
  drm/rockchip: dw_hdmi: rename vpll clock to reference clock
  drm/rockchip: dw_hdmi: add rk3568 support
  drm/rockchip: dw_hdmi: add regulator support
  drm/rockchip: dw_hdmi: Add support for hclk
  drm/rockchip: dw_hdmi: drop mode_valid hook
  clk: rockchip: rk3568: Add more PLL rates
  dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
  dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
  dt-bindings: display: rockchip: dw-hdmi: Add regulator support
  dt-bindings: display: rockchip: dw-hdmi: Add additional clock
  dt-bindings: display: rockchip: Add binding for VOP2
  arm64: dts: rockchip: rk3399: reorder hmdi clocks
  arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
  arm64: dts: rockchip: rk356x: Add VOP2 nodes
  arm64: dts: rockchip: rk356x: Add HDMI nodes
  arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
  clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
  clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
  drm/rockchip: Make VOP driver optional

 .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
 .../display/rockchip/rockchip-vop2.yaml       |  146 +
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
 drivers/clk/rockchip/clk-rk3568.c             |   14 +-
 drivers/gpu/drm/rockchip/Kconfig              |   14 +
 drivers/gpu/drm/rockchip/Makefile             |    4 +-
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
 include/drm/drm_encoder.h                     |    2 +
 include/dt-bindings/soc/rockchip,vop2.h       |   14 +
 21 files changed, 4039 insertions(+), 130 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

-- 
2.30.2

[PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Sascha Hauer]

Add a device node to drm_encoder which corresponds with the port node
in the DT description of the encoder. This allows drivers to find the
of_graph link between a crtc and an encoder.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/drm/drm_encoder.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 6e91a0280f31..3acd054b1eb3 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -99,6 +99,8 @@ struct drm_encoder {
 	struct drm_device *dev;
 	struct list_head head;
 
+	struct device_node *port;
+
 	struct drm_mode_object base;
 	char *name;
 	/**
-- 
2.30.2

[PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Sascha Hauer]

Add a device node to drm_encoder which corresponds with the port node
in the DT description of the encoder. This allows drivers to find the
of_graph link between a crtc and an encoder.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/drm/drm_encoder.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 6e91a0280f31..3acd054b1eb3 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -99,6 +99,8 @@ struct drm_encoder {
 	struct drm_device *dev;
 	struct list_head head;
 
+	struct device_node *port;
+
 	struct drm_mode_object base;
 	char *name;
 	/**
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Sascha Hauer]

Add a device node to drm_encoder which corresponds with the port node
in the DT description of the encoder. This allows drivers to find the
of_graph link between a crtc and an encoder.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/drm/drm_encoder.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 6e91a0280f31..3acd054b1eb3 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -99,6 +99,8 @@ struct drm_encoder {
 	struct drm_device *dev;
 	struct list_head head;
 
+	struct device_node *port;
+
 	struct drm_mode_object base;
 	char *name;
 	/**
-- 
2.30.2

[PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Sascha Hauer]

Add a device node to drm_encoder which corresponds with the port node
in the DT description of the encoder. This allows drivers to find the
of_graph link between a crtc and an encoder.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 include/drm/drm_encoder.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 6e91a0280f31..3acd054b1eb3 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -99,6 +99,8 @@ struct drm_encoder {
 	struct drm_device *dev;
 	struct list_head head;
 
+	struct device_node *port;
+
 	struct drm_mode_object base;
 	char *name;
 	/**
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Frank Wunderlich]

Hi

> Gesendet: Mittwoch, 26. Januar 2022 um 15:55 Uhr
> Von: "Sascha Hauer" <s.hauer@pengutronix.de>
> Betreff: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

Please use "git format-patch -vX ..." when creating your patches to make sure the version is set in every patch and not only the coverletter. That makes it easier to find Patch from specific version and shows version also in Patchwork where the coverletter is hidden

regards Frank

Aw: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Frank Wunderlich]

Hi

> Gesendet: Mittwoch, 26. Januar 2022 um 15:55 Uhr
> Von: "Sascha Hauer" <s.hauer@pengutronix.de>
> Betreff: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

Please use "git format-patch -vX ..." when creating your patches to make sure the version is set in every patch and not only the coverletter. That makes it easier to find Patch from specific version and shows version also in Patchwork where the coverletter is hidden

regards Frank

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Aw: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Frank Wunderlich]

Hi

> Gesendet: Mittwoch, 26. Januar 2022 um 15:55 Uhr
> Von: "Sascha Hauer" <s.hauer@pengutronix.de>
> Betreff: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

Please use "git format-patch -vX ..." when creating your patches to make sure the version is set in every patch and not only the coverletter. That makes it easier to find Patch from specific version and shows version also in Patchwork where the coverletter is hidden

regards Frank

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

[Frank Wunderlich]

Hi

> Gesendet: Mittwoch, 26. Januar 2022 um 15:55 Uhr
> Von: "Sascha Hauer" <s.hauer@pengutronix.de>
> Betreff: [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder

Please use "git format-patch -vX ..." when creating your patches to make sure the version is set in every patch and not only the coverletter. That makes it easier to find Patch from specific version and shows version also in Patchwork where the coverletter is hidden

regards Frank

[PATCH 02/27] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Sascha Hauer]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 830bdd5e9b7c..8677c8271678 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2

[PATCH 02/27] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Sascha Hauer]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 830bdd5e9b7c..8677c8271678 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 02/27] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Sascha Hauer]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 830bdd5e9b7c..8677c8271678 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 02/27] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Sascha Hauer]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 830bdd5e9b7c..8677c8271678 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2

[PATCH 03/27] drm/rockchip: dw_hdmi: rename vpll clock to reference clock

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
To fix that, this patch renames the vpll clock to ref clock. The clock
name "vpll" is left for compatibility to old device trees.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 29 ++++++++++++---------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 8677c8271678..e352e0404f77 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -69,7 +69,7 @@ struct rockchip_hdmi {
 	struct regmap *regmap;
 	struct drm_encoder encoder;
 	const struct rockchip_hdmi_chip_data *chip_data;
-	struct clk *vpll_clk;
+	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
 	struct phy *phy;
@@ -196,14 +196,17 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->regmap);
 	}
 
-	hdmi->vpll_clk = devm_clk_get(hdmi->dev, "vpll");
-	if (PTR_ERR(hdmi->vpll_clk) == -ENOENT) {
-		hdmi->vpll_clk = NULL;
-	} else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
+	hdmi->ref_clk = devm_clk_get(hdmi->dev, "ref");
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT)
+		hdmi->ref_clk = devm_clk_get(hdmi->dev, "vpll");
+
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT) {
+		hdmi->ref_clk = NULL;
+	} else if (PTR_ERR(hdmi->ref_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	} else if (IS_ERR(hdmi->vpll_clk)) {
-		DRM_DEV_ERROR(hdmi->dev, "failed to get vpll clock\n");
-		return PTR_ERR(hdmi->vpll_clk);
+	} else if (IS_ERR(hdmi->ref_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get reference clock\n");
+		return PTR_ERR(hdmi->ref_clk);
 	}
 
 	hdmi->grf_clk = devm_clk_get(hdmi->dev, "grf");
@@ -257,7 +260,7 @@ static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
 
-	clk_set_rate(hdmi->vpll_clk, adj_mode->clock * 1000);
+	clk_set_rate(hdmi->ref_clk, adj_mode->clock * 1000);
 }
 
 static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
@@ -537,9 +540,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
+	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
 		return ret;
 	}
@@ -558,7 +561,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
 		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->vpll_clk);
+		clk_disable_unprepare(hdmi->ref_clk);
 	}
 
 	return ret;
@@ -570,7 +573,7 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 	struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
 
 	dw_hdmi_unbind(hdmi->hdmi);
-	clk_disable_unprepare(hdmi->vpll_clk);
+	clk_disable_unprepare(hdmi->ref_clk);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2

[PATCH 03/27] drm/rockchip: dw_hdmi: rename vpll clock to reference clock

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
To fix that, this patch renames the vpll clock to ref clock. The clock
name "vpll" is left for compatibility to old device trees.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 29 ++++++++++++---------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 8677c8271678..e352e0404f77 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -69,7 +69,7 @@ struct rockchip_hdmi {
 	struct regmap *regmap;
 	struct drm_encoder encoder;
 	const struct rockchip_hdmi_chip_data *chip_data;
-	struct clk *vpll_clk;
+	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
 	struct phy *phy;
@@ -196,14 +196,17 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->regmap);
 	}
 
-	hdmi->vpll_clk = devm_clk_get(hdmi->dev, "vpll");
-	if (PTR_ERR(hdmi->vpll_clk) == -ENOENT) {
-		hdmi->vpll_clk = NULL;
-	} else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
+	hdmi->ref_clk = devm_clk_get(hdmi->dev, "ref");
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT)
+		hdmi->ref_clk = devm_clk_get(hdmi->dev, "vpll");
+
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT) {
+		hdmi->ref_clk = NULL;
+	} else if (PTR_ERR(hdmi->ref_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	} else if (IS_ERR(hdmi->vpll_clk)) {
-		DRM_DEV_ERROR(hdmi->dev, "failed to get vpll clock\n");
-		return PTR_ERR(hdmi->vpll_clk);
+	} else if (IS_ERR(hdmi->ref_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get reference clock\n");
+		return PTR_ERR(hdmi->ref_clk);
 	}
 
 	hdmi->grf_clk = devm_clk_get(hdmi->dev, "grf");
@@ -257,7 +260,7 @@ static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
 
-	clk_set_rate(hdmi->vpll_clk, adj_mode->clock * 1000);
+	clk_set_rate(hdmi->ref_clk, adj_mode->clock * 1000);
 }
 
 static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
@@ -537,9 +540,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
+	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
 		return ret;
 	}
@@ -558,7 +561,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
 		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->vpll_clk);
+		clk_disable_unprepare(hdmi->ref_clk);
 	}
 
 	return ret;
@@ -570,7 +573,7 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 	struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
 
 	dw_hdmi_unbind(hdmi->hdmi);
-	clk_disable_unprepare(hdmi->vpll_clk);
+	clk_disable_unprepare(hdmi->ref_clk);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 03/27] drm/rockchip: dw_hdmi: rename vpll clock to reference clock

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
To fix that, this patch renames the vpll clock to ref clock. The clock
name "vpll" is left for compatibility to old device trees.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 29 ++++++++++++---------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 8677c8271678..e352e0404f77 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -69,7 +69,7 @@ struct rockchip_hdmi {
 	struct regmap *regmap;
 	struct drm_encoder encoder;
 	const struct rockchip_hdmi_chip_data *chip_data;
-	struct clk *vpll_clk;
+	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
 	struct phy *phy;
@@ -196,14 +196,17 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->regmap);
 	}
 
-	hdmi->vpll_clk = devm_clk_get(hdmi->dev, "vpll");
-	if (PTR_ERR(hdmi->vpll_clk) == -ENOENT) {
-		hdmi->vpll_clk = NULL;
-	} else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
+	hdmi->ref_clk = devm_clk_get(hdmi->dev, "ref");
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT)
+		hdmi->ref_clk = devm_clk_get(hdmi->dev, "vpll");
+
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT) {
+		hdmi->ref_clk = NULL;
+	} else if (PTR_ERR(hdmi->ref_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	} else if (IS_ERR(hdmi->vpll_clk)) {
-		DRM_DEV_ERROR(hdmi->dev, "failed to get vpll clock\n");
-		return PTR_ERR(hdmi->vpll_clk);
+	} else if (IS_ERR(hdmi->ref_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get reference clock\n");
+		return PTR_ERR(hdmi->ref_clk);
 	}
 
 	hdmi->grf_clk = devm_clk_get(hdmi->dev, "grf");
@@ -257,7 +260,7 @@ static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
 
-	clk_set_rate(hdmi->vpll_clk, adj_mode->clock * 1000);
+	clk_set_rate(hdmi->ref_clk, adj_mode->clock * 1000);
 }
 
 static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
@@ -537,9 +540,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
+	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
 		return ret;
 	}
@@ -558,7 +561,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
 		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->vpll_clk);
+		clk_disable_unprepare(hdmi->ref_clk);
 	}
 
 	return ret;
@@ -570,7 +573,7 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 	struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
 
 	dw_hdmi_unbind(hdmi->hdmi);
-	clk_disable_unprepare(hdmi->vpll_clk);
+	clk_disable_unprepare(hdmi->ref_clk);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 03/27] drm/rockchip: dw_hdmi: rename vpll clock to reference clock

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
To fix that, this patch renames the vpll clock to ref clock. The clock
name "vpll" is left for compatibility to old device trees.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 29 ++++++++++++---------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 8677c8271678..e352e0404f77 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -69,7 +69,7 @@ struct rockchip_hdmi {
 	struct regmap *regmap;
 	struct drm_encoder encoder;
 	const struct rockchip_hdmi_chip_data *chip_data;
-	struct clk *vpll_clk;
+	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
 	struct phy *phy;
@@ -196,14 +196,17 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->regmap);
 	}
 
-	hdmi->vpll_clk = devm_clk_get(hdmi->dev, "vpll");
-	if (PTR_ERR(hdmi->vpll_clk) == -ENOENT) {
-		hdmi->vpll_clk = NULL;
-	} else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
+	hdmi->ref_clk = devm_clk_get(hdmi->dev, "ref");
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT)
+		hdmi->ref_clk = devm_clk_get(hdmi->dev, "vpll");
+
+	if (PTR_ERR(hdmi->ref_clk) == -ENOENT) {
+		hdmi->ref_clk = NULL;
+	} else if (PTR_ERR(hdmi->ref_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	} else if (IS_ERR(hdmi->vpll_clk)) {
-		DRM_DEV_ERROR(hdmi->dev, "failed to get vpll clock\n");
-		return PTR_ERR(hdmi->vpll_clk);
+	} else if (IS_ERR(hdmi->ref_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get reference clock\n");
+		return PTR_ERR(hdmi->ref_clk);
 	}
 
 	hdmi->grf_clk = devm_clk_get(hdmi->dev, "grf");
@@ -257,7 +260,7 @@ static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
 
-	clk_set_rate(hdmi->vpll_clk, adj_mode->clock * 1000);
+	clk_set_rate(hdmi->ref_clk, adj_mode->clock * 1000);
 }
 
 static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
@@ -537,9 +540,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
+	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
 		return ret;
 	}
@@ -558,7 +561,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
 		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->vpll_clk);
+		clk_disable_unprepare(hdmi->ref_clk);
 	}
 
 	return ret;
@@ -570,7 +573,7 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 	struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
 
 	dw_hdmi_unbind(hdmi->hdmi);
-	clk_disable_unprepare(hdmi->vpll_clk);
+	clk_disable_unprepare(hdmi->ref_clk);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2

[PATCH 04/27] drm/rockchip: dw_hdmi: add rk3568 support

[Sascha Hauer]

Add a new dw_hdmi_plat_data struct and new compatible for rk3568.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 31 +++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index e352e0404f77..262eef614cb1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -50,6 +50,10 @@
 #define RK3399_GRF_SOC_CON20		0x6250
 #define RK3399_HDMI_LCDC_SEL		BIT(6)
 
+#define RK3568_GRF_VO_CON1		0x0364
+#define RK3568_HDMI_SDAIN_MSK		BIT(15)
+#define RK3568_HDMI_SCLIN_MSK		BIT(14)
+
 #define HIWORD_UPDATE(val, mask)	(val | (mask) << 16)
 
 /**
@@ -470,6 +474,19 @@ static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
 	.use_drm_infoframe = true,
 };
 
+static struct rockchip_hdmi_chip_data rk3568_chip_data = {
+	.lcdsel_grf_reg = -1,
+};
+
+static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
+	.mode_valid = dw_hdmi_rockchip_mode_valid,
+	.mpll_cfg   = rockchip_mpll_cfg,
+	.cur_ctr    = rockchip_cur_ctr,
+	.phy_config = rockchip_phy_config,
+	.phy_data = &rk3568_chip_data,
+	.use_drm_infoframe = true,
+};
+
 static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3228-dw-hdmi",
 	  .data = &rk3228_hdmi_drv_data
@@ -483,6 +500,9 @@ static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3399-dw-hdmi",
 	  .data = &rk3399_hdmi_drv_data
 	},
+	{ .compatible = "rockchip,rk3568-dw-hdmi",
+	  .data = &rk3568_hdmi_drv_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_hdmi_rockchip_dt_ids);
@@ -517,6 +537,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	encoder = &hdmi->encoder;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	encoder->port = of_graph_get_port_by_id(dev->of_node, 0);
+
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
 	 * supposed to be connected to, it's because the CRTC has
@@ -547,6 +570,14 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	if (hdmi->chip_data == &rk3568_chip_data) {
+		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
+			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK,
+					   RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK));
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2

[PATCH 04/27] drm/rockchip: dw_hdmi: add rk3568 support

[Sascha Hauer]

Add a new dw_hdmi_plat_data struct and new compatible for rk3568.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 31 +++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index e352e0404f77..262eef614cb1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -50,6 +50,10 @@
 #define RK3399_GRF_SOC_CON20		0x6250
 #define RK3399_HDMI_LCDC_SEL		BIT(6)
 
+#define RK3568_GRF_VO_CON1		0x0364
+#define RK3568_HDMI_SDAIN_MSK		BIT(15)
+#define RK3568_HDMI_SCLIN_MSK		BIT(14)
+
 #define HIWORD_UPDATE(val, mask)	(val | (mask) << 16)
 
 /**
@@ -470,6 +474,19 @@ static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
 	.use_drm_infoframe = true,
 };
 
+static struct rockchip_hdmi_chip_data rk3568_chip_data = {
+	.lcdsel_grf_reg = -1,
+};
+
+static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
+	.mode_valid = dw_hdmi_rockchip_mode_valid,
+	.mpll_cfg   = rockchip_mpll_cfg,
+	.cur_ctr    = rockchip_cur_ctr,
+	.phy_config = rockchip_phy_config,
+	.phy_data = &rk3568_chip_data,
+	.use_drm_infoframe = true,
+};
+
 static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3228-dw-hdmi",
 	  .data = &rk3228_hdmi_drv_data
@@ -483,6 +500,9 @@ static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3399-dw-hdmi",
 	  .data = &rk3399_hdmi_drv_data
 	},
+	{ .compatible = "rockchip,rk3568-dw-hdmi",
+	  .data = &rk3568_hdmi_drv_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_hdmi_rockchip_dt_ids);
@@ -517,6 +537,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	encoder = &hdmi->encoder;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	encoder->port = of_graph_get_port_by_id(dev->of_node, 0);
+
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
 	 * supposed to be connected to, it's because the CRTC has
@@ -547,6 +570,14 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	if (hdmi->chip_data == &rk3568_chip_data) {
+		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
+			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK,
+					   RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK));
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 04/27] drm/rockchip: dw_hdmi: add rk3568 support

[Sascha Hauer]

Add a new dw_hdmi_plat_data struct and new compatible for rk3568.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 31 +++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index e352e0404f77..262eef614cb1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -50,6 +50,10 @@
 #define RK3399_GRF_SOC_CON20		0x6250
 #define RK3399_HDMI_LCDC_SEL		BIT(6)
 
+#define RK3568_GRF_VO_CON1		0x0364
+#define RK3568_HDMI_SDAIN_MSK		BIT(15)
+#define RK3568_HDMI_SCLIN_MSK		BIT(14)
+
 #define HIWORD_UPDATE(val, mask)	(val | (mask) << 16)
 
 /**
@@ -470,6 +474,19 @@ static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
 	.use_drm_infoframe = true,
 };
 
+static struct rockchip_hdmi_chip_data rk3568_chip_data = {
+	.lcdsel_grf_reg = -1,
+};
+
+static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
+	.mode_valid = dw_hdmi_rockchip_mode_valid,
+	.mpll_cfg   = rockchip_mpll_cfg,
+	.cur_ctr    = rockchip_cur_ctr,
+	.phy_config = rockchip_phy_config,
+	.phy_data = &rk3568_chip_data,
+	.use_drm_infoframe = true,
+};
+
 static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3228-dw-hdmi",
 	  .data = &rk3228_hdmi_drv_data
@@ -483,6 +500,9 @@ static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3399-dw-hdmi",
 	  .data = &rk3399_hdmi_drv_data
 	},
+	{ .compatible = "rockchip,rk3568-dw-hdmi",
+	  .data = &rk3568_hdmi_drv_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_hdmi_rockchip_dt_ids);
@@ -517,6 +537,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	encoder = &hdmi->encoder;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	encoder->port = of_graph_get_port_by_id(dev->of_node, 0);
+
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
 	 * supposed to be connected to, it's because the CRTC has
@@ -547,6 +570,14 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	if (hdmi->chip_data == &rk3568_chip_data) {
+		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
+			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK,
+					   RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK));
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 04/27] drm/rockchip: dw_hdmi: add rk3568 support

[Sascha Hauer]

Add a new dw_hdmi_plat_data struct and new compatible for rk3568.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 31 +++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index e352e0404f77..262eef614cb1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -50,6 +50,10 @@
 #define RK3399_GRF_SOC_CON20		0x6250
 #define RK3399_HDMI_LCDC_SEL		BIT(6)
 
+#define RK3568_GRF_VO_CON1		0x0364
+#define RK3568_HDMI_SDAIN_MSK		BIT(15)
+#define RK3568_HDMI_SCLIN_MSK		BIT(14)
+
 #define HIWORD_UPDATE(val, mask)	(val | (mask) << 16)
 
 /**
@@ -470,6 +474,19 @@ static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
 	.use_drm_infoframe = true,
 };
 
+static struct rockchip_hdmi_chip_data rk3568_chip_data = {
+	.lcdsel_grf_reg = -1,
+};
+
+static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
+	.mode_valid = dw_hdmi_rockchip_mode_valid,
+	.mpll_cfg   = rockchip_mpll_cfg,
+	.cur_ctr    = rockchip_cur_ctr,
+	.phy_config = rockchip_phy_config,
+	.phy_data = &rk3568_chip_data,
+	.use_drm_infoframe = true,
+};
+
 static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3228-dw-hdmi",
 	  .data = &rk3228_hdmi_drv_data
@@ -483,6 +500,9 @@ static const struct of_device_id dw_hdmi_rockchip_dt_ids[] = {
 	{ .compatible = "rockchip,rk3399-dw-hdmi",
 	  .data = &rk3399_hdmi_drv_data
 	},
+	{ .compatible = "rockchip,rk3568-dw-hdmi",
+	  .data = &rk3568_hdmi_drv_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_hdmi_rockchip_dt_ids);
@@ -517,6 +537,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	encoder = &hdmi->encoder;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	encoder->port = of_graph_get_port_by_id(dev->of_node, 0);
+
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
 	 * supposed to be connected to, it's because the CRTC has
@@ -547,6 +570,14 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	if (hdmi->chip_data == &rk3568_chip_data) {
+		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
+			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK,
+					   RK3568_HDMI_SDAIN_MSK |
+					   RK3568_HDMI_SCLIN_MSK));
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2

[PATCH 05/27] drm/rockchip: dw_hdmi: add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed
for the HDMI port. add support for these to the driver for boards which
have them supplied by switchable regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 41 +++++++++++++++++++--
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 262eef614cb1..3d7c3f6fdf22 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -9,6 +9,7 @@
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/bridge/dw_hdmi.h>
 #include <drm/drm_edid.h>
@@ -76,6 +77,8 @@ struct rockchip_hdmi {
 	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
+	struct regulator *avdd_0v9;
+	struct regulator *avdd_1v8;
 	struct phy *phy;
 };
 
@@ -223,6 +226,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
+	if (IS_ERR(hdmi->avdd_0v9))
+		return PTR_ERR(hdmi->avdd_0v9);
+
+	hdmi->avdd_1v8 = devm_regulator_get(hdmi->dev, "avdd-1v8");
+	if (IS_ERR(hdmi->avdd_1v8))
+		return PTR_ERR(hdmi->avdd_1v8);
+
 	return 0;
 }
 
@@ -563,11 +574,23 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = regulator_enable(hdmi->avdd_0v9);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd0v9: %d\n", ret);
+		goto err_avdd_0v9;
+	}
+
+	ret = regulator_enable(hdmi->avdd_1v8);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd1v8: %d\n", ret);
+		goto err_avdd_1v8;
+	}
+
 	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
 		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
-		return ret;
+		goto err_clk;
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
@@ -591,10 +614,19 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	 */
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
-		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->ref_clk);
+		goto err_bind;
 	}
 
+	return 0;
+
+err_bind:
+	clk_disable_unprepare(hdmi->ref_clk);
+	drm_encoder_cleanup(encoder);
+err_clk:
+	regulator_disable(hdmi->avdd_1v8);
+err_avdd_1v8:
+	regulator_disable(hdmi->avdd_0v9);
+err_avdd_0v9:
 	return ret;
 }
 
@@ -605,6 +637,9 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 
 	dw_hdmi_unbind(hdmi->hdmi);
 	clk_disable_unprepare(hdmi->ref_clk);
+
+	regulator_disable(hdmi->avdd_1v8);
+	regulator_disable(hdmi->avdd_0v9);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2

[PATCH 05/27] drm/rockchip: dw_hdmi: add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed
for the HDMI port. add support for these to the driver for boards which
have them supplied by switchable regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 41 +++++++++++++++++++--
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 262eef614cb1..3d7c3f6fdf22 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -9,6 +9,7 @@
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/bridge/dw_hdmi.h>
 #include <drm/drm_edid.h>
@@ -76,6 +77,8 @@ struct rockchip_hdmi {
 	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
+	struct regulator *avdd_0v9;
+	struct regulator *avdd_1v8;
 	struct phy *phy;
 };
 
@@ -223,6 +226,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
+	if (IS_ERR(hdmi->avdd_0v9))
+		return PTR_ERR(hdmi->avdd_0v9);
+
+	hdmi->avdd_1v8 = devm_regulator_get(hdmi->dev, "avdd-1v8");
+	if (IS_ERR(hdmi->avdd_1v8))
+		return PTR_ERR(hdmi->avdd_1v8);
+
 	return 0;
 }
 
@@ -563,11 +574,23 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = regulator_enable(hdmi->avdd_0v9);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd0v9: %d\n", ret);
+		goto err_avdd_0v9;
+	}
+
+	ret = regulator_enable(hdmi->avdd_1v8);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd1v8: %d\n", ret);
+		goto err_avdd_1v8;
+	}
+
 	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
 		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
-		return ret;
+		goto err_clk;
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
@@ -591,10 +614,19 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	 */
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
-		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->ref_clk);
+		goto err_bind;
 	}
 
+	return 0;
+
+err_bind:
+	clk_disable_unprepare(hdmi->ref_clk);
+	drm_encoder_cleanup(encoder);
+err_clk:
+	regulator_disable(hdmi->avdd_1v8);
+err_avdd_1v8:
+	regulator_disable(hdmi->avdd_0v9);
+err_avdd_0v9:
 	return ret;
 }
 
@@ -605,6 +637,9 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 
 	dw_hdmi_unbind(hdmi->hdmi);
 	clk_disable_unprepare(hdmi->ref_clk);
+
+	regulator_disable(hdmi->avdd_1v8);
+	regulator_disable(hdmi->avdd_0v9);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 05/27] drm/rockchip: dw_hdmi: add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed
for the HDMI port. add support for these to the driver for boards which
have them supplied by switchable regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 41 +++++++++++++++++++--
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 262eef614cb1..3d7c3f6fdf22 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -9,6 +9,7 @@
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/bridge/dw_hdmi.h>
 #include <drm/drm_edid.h>
@@ -76,6 +77,8 @@ struct rockchip_hdmi {
 	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
+	struct regulator *avdd_0v9;
+	struct regulator *avdd_1v8;
 	struct phy *phy;
 };
 
@@ -223,6 +226,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
+	if (IS_ERR(hdmi->avdd_0v9))
+		return PTR_ERR(hdmi->avdd_0v9);
+
+	hdmi->avdd_1v8 = devm_regulator_get(hdmi->dev, "avdd-1v8");
+	if (IS_ERR(hdmi->avdd_1v8))
+		return PTR_ERR(hdmi->avdd_1v8);
+
 	return 0;
 }
 
@@ -563,11 +574,23 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = regulator_enable(hdmi->avdd_0v9);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd0v9: %d\n", ret);
+		goto err_avdd_0v9;
+	}
+
+	ret = regulator_enable(hdmi->avdd_1v8);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd1v8: %d\n", ret);
+		goto err_avdd_1v8;
+	}
+
 	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
 		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
-		return ret;
+		goto err_clk;
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
@@ -591,10 +614,19 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	 */
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
-		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->ref_clk);
+		goto err_bind;
 	}
 
+	return 0;
+
+err_bind:
+	clk_disable_unprepare(hdmi->ref_clk);
+	drm_encoder_cleanup(encoder);
+err_clk:
+	regulator_disable(hdmi->avdd_1v8);
+err_avdd_1v8:
+	regulator_disable(hdmi->avdd_0v9);
+err_avdd_0v9:
 	return ret;
 }
 
@@ -605,6 +637,9 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 
 	dw_hdmi_unbind(hdmi->hdmi);
 	clk_disable_unprepare(hdmi->ref_clk);
+
+	regulator_disable(hdmi->avdd_1v8);
+	regulator_disable(hdmi->avdd_0v9);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 05/27] drm/rockchip: dw_hdmi: add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs needed
for the HDMI port. add support for these to the driver for boards which
have them supplied by switchable regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 41 +++++++++++++++++++--
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 262eef614cb1..3d7c3f6fdf22 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -9,6 +9,7 @@
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/bridge/dw_hdmi.h>
 #include <drm/drm_edid.h>
@@ -76,6 +77,8 @@ struct rockchip_hdmi {
 	struct clk *ref_clk;
 	struct clk *grf_clk;
 	struct dw_hdmi *hdmi;
+	struct regulator *avdd_0v9;
+	struct regulator *avdd_1v8;
 	struct phy *phy;
 };
 
@@ -223,6 +226,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
+	if (IS_ERR(hdmi->avdd_0v9))
+		return PTR_ERR(hdmi->avdd_0v9);
+
+	hdmi->avdd_1v8 = devm_regulator_get(hdmi->dev, "avdd-1v8");
+	if (IS_ERR(hdmi->avdd_1v8))
+		return PTR_ERR(hdmi->avdd_1v8);
+
 	return 0;
 }
 
@@ -563,11 +574,23 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = regulator_enable(hdmi->avdd_0v9);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd0v9: %d\n", ret);
+		goto err_avdd_0v9;
+	}
+
+	ret = regulator_enable(hdmi->avdd_1v8);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable avdd1v8: %d\n", ret);
+		goto err_avdd_1v8;
+	}
+
 	ret = clk_prepare_enable(hdmi->ref_clk);
 	if (ret) {
 		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI reference clock: %d\n",
 			      ret);
-		return ret;
+		goto err_clk;
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
@@ -591,10 +614,19 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	 */
 	if (IS_ERR(hdmi->hdmi)) {
 		ret = PTR_ERR(hdmi->hdmi);
-		drm_encoder_cleanup(encoder);
-		clk_disable_unprepare(hdmi->ref_clk);
+		goto err_bind;
 	}
 
+	return 0;
+
+err_bind:
+	clk_disable_unprepare(hdmi->ref_clk);
+	drm_encoder_cleanup(encoder);
+err_clk:
+	regulator_disable(hdmi->avdd_1v8);
+err_avdd_1v8:
+	regulator_disable(hdmi->avdd_0v9);
+err_avdd_0v9:
 	return ret;
 }
 
@@ -605,6 +637,9 @@ static void dw_hdmi_rockchip_unbind(struct device *dev, struct device *master,
 
 	dw_hdmi_unbind(hdmi->hdmi);
 	clk_disable_unprepare(hdmi->ref_clk);
+
+	regulator_disable(hdmi->avdd_1v8);
+	regulator_disable(hdmi->avdd_0v9);
 }
 
 static const struct component_ops dw_hdmi_rockchip_ops = {
-- 
2.30.2

[PATCH 06/27] drm/rockchip: dw_hdmi: Add support for hclk

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 3d7c3f6fdf22..b9928e622adf 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -76,6 +76,7 @@ struct rockchip_hdmi {
 	const struct rockchip_hdmi_chip_data *chip_data;
 	struct clk *ref_clk;
 	struct clk *grf_clk;
+	struct clk *hclk_clk;
 	struct dw_hdmi *hdmi;
 	struct regulator *avdd_0v9;
 	struct regulator *avdd_1v8;
@@ -226,6 +227,16 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->hclk_clk = devm_clk_get(hdmi->dev, "hclk");
+	if (PTR_ERR(hdmi->hclk_clk) == -ENOENT) {
+		hdmi->hclk_clk = NULL;
+	} else if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(hdmi->hclk_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get hclk_clk clock\n");
+		return PTR_ERR(hdmi->hclk_clk);
+	}
+
 	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
 	if (IS_ERR(hdmi->avdd_0v9))
 		return PTR_ERR(hdmi->avdd_0v9);
@@ -593,6 +604,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		goto err_clk;
 	}
 
+	ret = clk_prepare_enable(hdmi->hclk_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI hclk clock: %d\n",
+			      ret);
+		goto err_clk;
+	}
+
 	if (hdmi->chip_data == &rk3568_chip_data) {
 		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
 			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
-- 
2.30.2

[PATCH 06/27] drm/rockchip: dw_hdmi: Add support for hclk

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 3d7c3f6fdf22..b9928e622adf 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -76,6 +76,7 @@ struct rockchip_hdmi {
 	const struct rockchip_hdmi_chip_data *chip_data;
 	struct clk *ref_clk;
 	struct clk *grf_clk;
+	struct clk *hclk_clk;
 	struct dw_hdmi *hdmi;
 	struct regulator *avdd_0v9;
 	struct regulator *avdd_1v8;
@@ -226,6 +227,16 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->hclk_clk = devm_clk_get(hdmi->dev, "hclk");
+	if (PTR_ERR(hdmi->hclk_clk) == -ENOENT) {
+		hdmi->hclk_clk = NULL;
+	} else if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(hdmi->hclk_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get hclk_clk clock\n");
+		return PTR_ERR(hdmi->hclk_clk);
+	}
+
 	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
 	if (IS_ERR(hdmi->avdd_0v9))
 		return PTR_ERR(hdmi->avdd_0v9);
@@ -593,6 +604,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		goto err_clk;
 	}
 
+	ret = clk_prepare_enable(hdmi->hclk_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI hclk clock: %d\n",
+			      ret);
+		goto err_clk;
+	}
+
 	if (hdmi->chip_data == &rk3568_chip_data) {
 		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
 			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/27] drm/rockchip: dw_hdmi: Add support for hclk

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 3d7c3f6fdf22..b9928e622adf 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -76,6 +76,7 @@ struct rockchip_hdmi {
 	const struct rockchip_hdmi_chip_data *chip_data;
 	struct clk *ref_clk;
 	struct clk *grf_clk;
+	struct clk *hclk_clk;
 	struct dw_hdmi *hdmi;
 	struct regulator *avdd_0v9;
 	struct regulator *avdd_1v8;
@@ -226,6 +227,16 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->hclk_clk = devm_clk_get(hdmi->dev, "hclk");
+	if (PTR_ERR(hdmi->hclk_clk) == -ENOENT) {
+		hdmi->hclk_clk = NULL;
+	} else if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(hdmi->hclk_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get hclk_clk clock\n");
+		return PTR_ERR(hdmi->hclk_clk);
+	}
+
 	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
 	if (IS_ERR(hdmi->avdd_0v9))
 		return PTR_ERR(hdmi->avdd_0v9);
@@ -593,6 +604,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		goto err_clk;
 	}
 
+	ret = clk_prepare_enable(hdmi->hclk_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI hclk clock: %d\n",
+			      ret);
+		goto err_clk;
+	}
+
 	if (hdmi->chip_data == &rk3568_chip_data) {
 		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
 			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 06/27] drm/rockchip: dw_hdmi: Add support for hclk

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 3d7c3f6fdf22..b9928e622adf 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -76,6 +76,7 @@ struct rockchip_hdmi {
 	const struct rockchip_hdmi_chip_data *chip_data;
 	struct clk *ref_clk;
 	struct clk *grf_clk;
+	struct clk *hclk_clk;
 	struct dw_hdmi *hdmi;
 	struct regulator *avdd_0v9;
 	struct regulator *avdd_1v8;
@@ -226,6 +227,16 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
+	hdmi->hclk_clk = devm_clk_get(hdmi->dev, "hclk");
+	if (PTR_ERR(hdmi->hclk_clk) == -ENOENT) {
+		hdmi->hclk_clk = NULL;
+	} else if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(hdmi->hclk_clk)) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get hclk_clk clock\n");
+		return PTR_ERR(hdmi->hclk_clk);
+	}
+
 	hdmi->avdd_0v9 = devm_regulator_get(hdmi->dev, "avdd-0v9");
 	if (IS_ERR(hdmi->avdd_0v9))
 		return PTR_ERR(hdmi->avdd_0v9);
@@ -593,6 +604,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		goto err_clk;
 	}
 
+	ret = clk_prepare_enable(hdmi->hclk_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI hclk clock: %d\n",
+			      ret);
+		goto err_clk;
+	}
+
 	if (hdmi->chip_data == &rk3568_chip_data) {
 		regmap_write(hdmi->regmap, RK3568_GRF_VO_CON1,
 			     HIWORD_UPDATE(RK3568_HDMI_SDAIN_MSK |
-- 
2.30.2

[PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

From: Douglas Anderson <dianders at chromium.org>

The previous tables for mpll_cfg and curr_ctrl were created using the
20-pages of example settings provided by the PHY vendor.  Those
example settings weren't particularly dense, so there were places
where we were guessing what the settings would be for 10-bit and
12-bit (not that we use those anyway).  It was also always a lot of
extra work every time we wanted to add a new clock rate since we had
to cross-reference several tables.

In <http://crosreview.com/285855> I've gone through the work to figure
out how to generate this table automatically.  Let's now use the
automatically generated table and then we'll never need to look at it
again.

We only support 8-bit mode right now and only support a small number
of clock rates and and I've verified that the only 8-bit rate that was
affected was 148.5.  That mode appears to have been wrong in the old
table.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders at chromium.org>
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 130 +++++++++++---------
 1 file changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index b9928e622adf..160107b333ef 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -87,80 +87,88 @@ struct rockchip_hdmi {
 
 static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 	{
-		27000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+		30666000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40f3, 0x0000 },
 		},
-	}, {
-		36000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		36800000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		40000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		46000000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		54000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		61333000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		65000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		73600000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		66000000, {
-			{ 0x013e, 0x0003},
-			{ 0x217e, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		92000000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		74250000, {
-			{ 0x0072, 0x0001},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		122666000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		83500000, {
-			{ 0x0072, 0x0001},
+	},  {
+		147200000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		108000000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		184000000, {
+			{ 0x0051, 0x0002 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		106500000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		226666000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		146250000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		272000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
-		148500000, {
-			{ 0x0051, 0x0003},
-			{ 0x214c, 0x0003},
-			{ 0x4064, 0x0003}
+	},  {
+		340000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
+	},  {
+		600000000, {
+			{ 0x1a40, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
+		},
+	},  {
 		~0UL, {
-			{ 0x00a0, 0x000a },
-			{ 0x2001, 0x000f },
-			{ 0x4002, 0x000f },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
 		},
 	}
 };
-- 
2.30.2

[PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

From: Douglas Anderson <dianders at chromium.org>

The previous tables for mpll_cfg and curr_ctrl were created using the
20-pages of example settings provided by the PHY vendor.  Those
example settings weren't particularly dense, so there were places
where we were guessing what the settings would be for 10-bit and
12-bit (not that we use those anyway).  It was also always a lot of
extra work every time we wanted to add a new clock rate since we had
to cross-reference several tables.

In <http://crosreview.com/285855> I've gone through the work to figure
out how to generate this table automatically.  Let's now use the
automatically generated table and then we'll never need to look at it
again.

We only support 8-bit mode right now and only support a small number
of clock rates and and I've verified that the only 8-bit rate that was
affected was 148.5.  That mode appears to have been wrong in the old
table.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders at chromium.org>
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 130 +++++++++++---------
 1 file changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index b9928e622adf..160107b333ef 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -87,80 +87,88 @@ struct rockchip_hdmi {
 
 static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 	{
-		27000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+		30666000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40f3, 0x0000 },
 		},
-	}, {
-		36000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		36800000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		40000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		46000000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		54000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		61333000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		65000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		73600000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		66000000, {
-			{ 0x013e, 0x0003},
-			{ 0x217e, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		92000000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		74250000, {
-			{ 0x0072, 0x0001},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		122666000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		83500000, {
-			{ 0x0072, 0x0001},
+	},  {
+		147200000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		108000000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		184000000, {
+			{ 0x0051, 0x0002 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		106500000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		226666000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		146250000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		272000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
-		148500000, {
-			{ 0x0051, 0x0003},
-			{ 0x214c, 0x0003},
-			{ 0x4064, 0x0003}
+	},  {
+		340000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
+	},  {
+		600000000, {
+			{ 0x1a40, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
+		},
+	},  {
 		~0UL, {
-			{ 0x00a0, 0x000a },
-			{ 0x2001, 0x000f },
-			{ 0x4002, 0x000f },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
 		},
 	}
 };
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

From: Douglas Anderson <dianders at chromium.org>

The previous tables for mpll_cfg and curr_ctrl were created using the
20-pages of example settings provided by the PHY vendor.  Those
example settings weren't particularly dense, so there were places
where we were guessing what the settings would be for 10-bit and
12-bit (not that we use those anyway).  It was also always a lot of
extra work every time we wanted to add a new clock rate since we had
to cross-reference several tables.

In <http://crosreview.com/285855> I've gone through the work to figure
out how to generate this table automatically.  Let's now use the
automatically generated table and then we'll never need to look at it
again.

We only support 8-bit mode right now and only support a small number
of clock rates and and I've verified that the only 8-bit rate that was
affected was 148.5.  That mode appears to have been wrong in the old
table.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders at chromium.org>
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 130 +++++++++++---------
 1 file changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index b9928e622adf..160107b333ef 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -87,80 +87,88 @@ struct rockchip_hdmi {
 
 static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 	{
-		27000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+		30666000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40f3, 0x0000 },
 		},
-	}, {
-		36000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		36800000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		40000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		46000000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		54000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		61333000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		65000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		73600000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		66000000, {
-			{ 0x013e, 0x0003},
-			{ 0x217e, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		92000000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		74250000, {
-			{ 0x0072, 0x0001},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		122666000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		83500000, {
-			{ 0x0072, 0x0001},
+	},  {
+		147200000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		108000000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		184000000, {
+			{ 0x0051, 0x0002 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		106500000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		226666000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		146250000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		272000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
-		148500000, {
-			{ 0x0051, 0x0003},
-			{ 0x214c, 0x0003},
-			{ 0x4064, 0x0003}
+	},  {
+		340000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
+	},  {
+		600000000, {
+			{ 0x1a40, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
+		},
+	},  {
 		~0UL, {
-			{ 0x00a0, 0x000a },
-			{ 0x2001, 0x000f },
-			{ 0x4002, 0x000f },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
 		},
 	}
 };
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

From: Douglas Anderson <dianders at chromium.org>

The previous tables for mpll_cfg and curr_ctrl were created using the
20-pages of example settings provided by the PHY vendor.  Those
example settings weren't particularly dense, so there were places
where we were guessing what the settings would be for 10-bit and
12-bit (not that we use those anyway).  It was also always a lot of
extra work every time we wanted to add a new clock rate since we had
to cross-reference several tables.

In <http://crosreview.com/285855> I've gone through the work to figure
out how to generate this table automatically.  Let's now use the
automatically generated table and then we'll never need to look at it
again.

We only support 8-bit mode right now and only support a small number
of clock rates and and I've verified that the only 8-bit rate that was
affected was 148.5.  That mode appears to have been wrong in the old
table.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders at chromium.org>
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 130 +++++++++++---------
 1 file changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index b9928e622adf..160107b333ef 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -87,80 +87,88 @@ struct rockchip_hdmi {
 
 static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 	{
-		27000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+		30666000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40f3, 0x0000 },
 		},
-	}, {
-		36000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		36800000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2153, 0x0000 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		40000000, {
-			{ 0x00b3, 0x0000},
-			{ 0x2153, 0x0000},
-			{ 0x40f3, 0x0000}
+	},  {
+		46000000, {
+			{ 0x00b3, 0x0000 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		54000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		61333000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x40a2, 0x0001 },
 		},
-	}, {
-		65000000, {
-			{ 0x0072, 0x0001},
-			{ 0x2142, 0x0001},
-			{ 0x40a2, 0x0001},
+	},  {
+		73600000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2142, 0x0001 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		66000000, {
-			{ 0x013e, 0x0003},
-			{ 0x217e, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		92000000, {
+			{ 0x0072, 0x0001 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		74250000, {
-			{ 0x0072, 0x0001},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		122666000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4061, 0x0002 },
 		},
-	}, {
-		83500000, {
-			{ 0x0072, 0x0001},
+	},  {
+		147200000, {
+			{ 0x0051, 0x0002 },
+			{ 0x2145, 0x0002 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		108000000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		184000000, {
+			{ 0x0051, 0x0002 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		106500000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		226666000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x4064, 0x0003 },
 		},
-	}, {
-		146250000, {
-			{ 0x0051, 0x0002},
-			{ 0x2145, 0x0002},
-			{ 0x4061, 0x0002}
+	},  {
+		272000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x214c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
-		148500000, {
-			{ 0x0051, 0x0003},
-			{ 0x214c, 0x0003},
-			{ 0x4064, 0x0003}
+	},  {
+		340000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
 		},
-	}, {
+	},  {
+		600000000, {
+			{ 0x1a40, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
+		},
+	},  {
 		~0UL, {
-			{ 0x00a0, 0x000a },
-			{ 0x2001, 0x000f },
-			{ 0x4002, 0x000f },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
+			{ 0x0000, 0x0000 },
 		},
 	}
 };
-- 
2.30.2

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders at chromium.org>
>
> The previous tables for mpll_cfg and curr_ctrl were created using the
> 20-pages of example settings provided by the PHY vendor.  Those
> example settings weren't particularly dense, so there were places
> where we were guessing what the settings would be for 10-bit and
> 12-bit (not that we use those anyway).  It was also always a lot of
> extra work every time we wanted to add a new clock rate since we had
> to cross-reference several tables.
>
> In <http://crosreview.com/285855> I've gone through the work to figure

The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
update to https://crrev.com/c/285855 ?

> out how to generate this table automatically.  Let's now use the
> automatically generated table and then we'll never need to look at it
> again.
>
> We only support 8-bit mode right now and only support a small number
> of clock rates and and I've verified that the only 8-bit rate that was
> affected was 148.5.  That mode appears to have been wrong in the old
> table.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>

Should probably change the "at" to "@" ?

> Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>

In general shouldn't carry downstream reviews when posting upstream
unless you're certain that the person intended it...


It's been a long time, but in general I think I was fairly confident
in the numbers that my script pumped out, at least given the caveat of
no pixel repetition and 8-bit only. That being said, I didn't have any
inside knowledge of the hardware and just figured out formulas that
seemed to match the table that I had. YMMV.

I'll also say that when I did a rebase of veyron (rk3288-based
Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
of these patches into 1. That can be found at
<https://crrev.com/c/1661056>. That also has details about why some of
these patches never made it upstream. The main reason, at least in the
case of rk3288, was the PLL sharing problem that nobody ever solved.
rk3288 didn't have quite enough PLLs and thus, if you were using both
VOPs, one of the VOPs was going to be severely limited in what pixel
clocks it could make. There was no framework deciding which VOP should
be limited and how the system should react to this...


In any case, I'm pretty far disconnected from all this stuff now, but
I wish you the best of luck in trying to get it all solved!

-Doug

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders at chromium.org>
>
> The previous tables for mpll_cfg and curr_ctrl were created using the
> 20-pages of example settings provided by the PHY vendor.  Those
> example settings weren't particularly dense, so there were places
> where we were guessing what the settings would be for 10-bit and
> 12-bit (not that we use those anyway).  It was also always a lot of
> extra work every time we wanted to add a new clock rate since we had
> to cross-reference several tables.
>
> In <http://crosreview.com/285855> I've gone through the work to figure

The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
update to https://crrev.com/c/285855 ?

> out how to generate this table automatically.  Let's now use the
> automatically generated table and then we'll never need to look at it
> again.
>
> We only support 8-bit mode right now and only support a small number
> of clock rates and and I've verified that the only 8-bit rate that was
> affected was 148.5.  That mode appears to have been wrong in the old
> table.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>

Should probably change the "at" to "@" ?

> Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>

In general shouldn't carry downstream reviews when posting upstream
unless you're certain that the person intended it...


It's been a long time, but in general I think I was fairly confident
in the numbers that my script pumped out, at least given the caveat of
no pixel repetition and 8-bit only. That being said, I didn't have any
inside knowledge of the hardware and just figured out formulas that
seemed to match the table that I had. YMMV.

I'll also say that when I did a rebase of veyron (rk3288-based
Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
of these patches into 1. That can be found at
<https://crrev.com/c/1661056>. That also has details about why some of
these patches never made it upstream. The main reason, at least in the
case of rk3288, was the PLL sharing problem that nobody ever solved.
rk3288 didn't have quite enough PLLs and thus, if you were using both
VOPs, one of the VOPs was going to be severely limited in what pixel
clocks it could make. There was no framework deciding which VOP should
be limited and how the system should react to this...


In any case, I'm pretty far disconnected from all this stuff now, but
I wish you the best of luck in trying to get it all solved!

-Doug

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders at chromium.org>
>
> The previous tables for mpll_cfg and curr_ctrl were created using the
> 20-pages of example settings provided by the PHY vendor.  Those
> example settings weren't particularly dense, so there were places
> where we were guessing what the settings would be for 10-bit and
> 12-bit (not that we use those anyway).  It was also always a lot of
> extra work every time we wanted to add a new clock rate since we had
> to cross-reference several tables.
>
> In <http://crosreview.com/285855> I've gone through the work to figure

The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
update to https://crrev.com/c/285855 ?

> out how to generate this table automatically.  Let's now use the
> automatically generated table and then we'll never need to look at it
> again.
>
> We only support 8-bit mode right now and only support a small number
> of clock rates and and I've verified that the only 8-bit rate that was
> affected was 148.5.  That mode appears to have been wrong in the old
> table.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>

Should probably change the "at" to "@" ?

> Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>

In general shouldn't carry downstream reviews when posting upstream
unless you're certain that the person intended it...


It's been a long time, but in general I think I was fairly confident
in the numbers that my script pumped out, at least given the caveat of
no pixel repetition and 8-bit only. That being said, I didn't have any
inside knowledge of the hardware and just figured out formulas that
seemed to match the table that I had. YMMV.

I'll also say that when I did a rebase of veyron (rk3288-based
Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
of these patches into 1. That can be found at
<https://crrev.com/c/1661056>. That also has details about why some of
these patches never made it upstream. The main reason, at least in the
case of rk3288, was the PLL sharing problem that nobody ever solved.
rk3288 didn't have quite enough PLLs and thus, if you were using both
VOPs, one of the VOPs was going to be severely limited in what pixel
clocks it could make. There was no framework deciding which VOP should
be limited and how the system should react to this...


In any case, I'm pretty far disconnected from all this stuff now, but
I wish you the best of luck in trying to get it all solved!

-Doug

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders at chromium.org>
>
> The previous tables for mpll_cfg and curr_ctrl were created using the
> 20-pages of example settings provided by the PHY vendor.  Those
> example settings weren't particularly dense, so there were places
> where we were guessing what the settings would be for 10-bit and
> 12-bit (not that we use those anyway).  It was also always a lot of
> extra work every time we wanted to add a new clock rate since we had
> to cross-reference several tables.
>
> In <http://crosreview.com/285855> I've gone through the work to figure

The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
update to https://crrev.com/c/285855 ?

> out how to generate this table automatically.  Let's now use the
> automatically generated table and then we'll never need to look at it
> again.
>
> We only support 8-bit mode right now and only support a small number
> of clock rates and and I've verified that the only 8-bit rate that was
> affected was 148.5.  That mode appears to have been wrong in the old
> table.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>

Should probably change the "at" to "@" ?

> Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>

In general shouldn't carry downstream reviews when posting upstream
unless you're certain that the person intended it...


It's been a long time, but in general I think I was fairly confident
in the numbers that my script pumped out, at least given the caveat of
no pixel repetition and 8-bit only. That being said, I didn't have any
inside knowledge of the hardware and just figured out formulas that
seemed to match the table that I had. YMMV.

I'll also say that when I did a rebase of veyron (rk3288-based
Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
of these patches into 1. That can be found at
<https://crrev.com/c/1661056>. That also has details about why some of
these patches never made it upstream. The main reason, at least in the
case of rk3288, was the PLL sharing problem that nobody ever solved.
rk3288 didn't have quite enough PLLs and thus, if you were using both
VOPs, one of the VOPs was going to be severely limited in what pixel
clocks it could make. There was no framework deciding which VOP should
be limited and how the system should react to this...


In any case, I'm pretty far disconnected from all this stuff now, but
I wish you the best of luck in trying to get it all solved!

-Doug

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:54:53AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders at chromium.org>
> >
> > The previous tables for mpll_cfg and curr_ctrl were created using the
> > 20-pages of example settings provided by the PHY vendor.  Those
> > example settings weren't particularly dense, so there were places
> > where we were guessing what the settings would be for 10-bit and
> > 12-bit (not that we use those anyway).  It was also always a lot of
> > extra work every time we wanted to add a new clock rate since we had
> > to cross-reference several tables.
> >
> > In <http://crosreview.com/285855> I've gone through the work to figure
> 
> The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
> update to https://crrev.com/c/285855 ?

did that, thanks.

> 
> > out how to generate this table automatically.  Let's now use the
> > automatically generated table and then we'll never need to look at it
> > again.
> >
> > We only support 8-bit mode right now and only support a small number
> > of clock rates and and I've verified that the only 8-bit rate that was
> > affected was 148.5.  That mode appears to have been wrong in the old
> > table.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders at chromium.org>
> > Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> 
> Should probably change the "at" to "@" ?

yes.

> 
> > Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
> 
> In general shouldn't carry downstream reviews when posting upstream
> unless you're certain that the person intended it...
> 
> 
> It's been a long time, but in general I think I was fairly confident
> in the numbers that my script pumped out, at least given the caveat of
> no pixel repetition and 8-bit only. That being said, I didn't have any
> inside knowledge of the hardware and just figured out formulas that
> seemed to match the table that I had. YMMV.

Rockchip adopted this patch for their downstream Kernel, so they haven't
been able to come up with better values. Given that you created this
patch for a fairly old SoC and the values are still usable on rk3568 I
think that's the way to go.

> 
> I'll also say that when I did a rebase of veyron (rk3288-based
> Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
> of these patches into 1. That can be found at
> <https://crrev.com/c/1661056>. That also has details about why some of
> these patches never made it upstream. The main reason, at least in the
> case of rk3288, was the PLL sharing problem that nobody ever solved.
> rk3288 didn't have quite enough PLLs and thus, if you were using both
> VOPs, one of the VOPs was going to be severely limited in what pixel
> clocks it could make. There was no framework deciding which VOP should
> be limited and how the system should react to this...
> 
> 
> In any case, I'm pretty far disconnected from all this stuff now, but
> I wish you the best of luck in trying to get it all solved!

Nah, sorry, I won't get that all solved ;)

I am not that interested in rk3288, my main concern is the rk3568. That
one has two spare PLLs for three heads instead of one PLL for two heads,
so the problem is less pressing.

I'll stick to this version of the patch instead of the combined one
because this patch seems to be correct regardless of the PLL problem.

Thanks for the link though, it gives me some insights why things are the
way they are currently.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:54:53AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders at chromium.org>
> >
> > The previous tables for mpll_cfg and curr_ctrl were created using the
> > 20-pages of example settings provided by the PHY vendor.  Those
> > example settings weren't particularly dense, so there were places
> > where we were guessing what the settings would be for 10-bit and
> > 12-bit (not that we use those anyway).  It was also always a lot of
> > extra work every time we wanted to add a new clock rate since we had
> > to cross-reference several tables.
> >
> > In <http://crosreview.com/285855> I've gone through the work to figure
> 
> The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
> update to https://crrev.com/c/285855 ?

did that, thanks.

> 
> > out how to generate this table automatically.  Let's now use the
> > automatically generated table and then we'll never need to look at it
> > again.
> >
> > We only support 8-bit mode right now and only support a small number
> > of clock rates and and I've verified that the only 8-bit rate that was
> > affected was 148.5.  That mode appears to have been wrong in the old
> > table.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders at chromium.org>
> > Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> 
> Should probably change the "at" to "@" ?

yes.

> 
> > Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
> 
> In general shouldn't carry downstream reviews when posting upstream
> unless you're certain that the person intended it...
> 
> 
> It's been a long time, but in general I think I was fairly confident
> in the numbers that my script pumped out, at least given the caveat of
> no pixel repetition and 8-bit only. That being said, I didn't have any
> inside knowledge of the hardware and just figured out formulas that
> seemed to match the table that I had. YMMV.

Rockchip adopted this patch for their downstream Kernel, so they haven't
been able to come up with better values. Given that you created this
patch for a fairly old SoC and the values are still usable on rk3568 I
think that's the way to go.

> 
> I'll also say that when I did a rebase of veyron (rk3288-based
> Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
> of these patches into 1. That can be found at
> <https://crrev.com/c/1661056>. That also has details about why some of
> these patches never made it upstream. The main reason, at least in the
> case of rk3288, was the PLL sharing problem that nobody ever solved.
> rk3288 didn't have quite enough PLLs and thus, if you were using both
> VOPs, one of the VOPs was going to be severely limited in what pixel
> clocks it could make. There was no framework deciding which VOP should
> be limited and how the system should react to this...
> 
> 
> In any case, I'm pretty far disconnected from all this stuff now, but
> I wish you the best of luck in trying to get it all solved!

Nah, sorry, I won't get that all solved ;)

I am not that interested in rk3288, my main concern is the rk3568. That
one has two spare PLLs for three heads instead of one PLL for two heads,
so the problem is less pressing.

I'll stick to this version of the patch instead of the combined one
because this patch seems to be correct regardless of the PLL problem.

Thanks for the link though, it gives me some insights why things are the
way they are currently.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:54:53AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders at chromium.org>
> >
> > The previous tables for mpll_cfg and curr_ctrl were created using the
> > 20-pages of example settings provided by the PHY vendor.  Those
> > example settings weren't particularly dense, so there were places
> > where we were guessing what the settings would be for 10-bit and
> > 12-bit (not that we use those anyway).  It was also always a lot of
> > extra work every time we wanted to add a new clock rate since we had
> > to cross-reference several tables.
> >
> > In <http://crosreview.com/285855> I've gone through the work to figure
> 
> The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
> update to https://crrev.com/c/285855 ?

did that, thanks.

> 
> > out how to generate this table automatically.  Let's now use the
> > automatically generated table and then we'll never need to look at it
> > again.
> >
> > We only support 8-bit mode right now and only support a small number
> > of clock rates and and I've verified that the only 8-bit rate that was
> > affected was 148.5.  That mode appears to have been wrong in the old
> > table.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders at chromium.org>
> > Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> 
> Should probably change the "at" to "@" ?

yes.

> 
> > Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
> 
> In general shouldn't carry downstream reviews when posting upstream
> unless you're certain that the person intended it...
> 
> 
> It's been a long time, but in general I think I was fairly confident
> in the numbers that my script pumped out, at least given the caveat of
> no pixel repetition and 8-bit only. That being said, I didn't have any
> inside knowledge of the hardware and just figured out formulas that
> seemed to match the table that I had. YMMV.

Rockchip adopted this patch for their downstream Kernel, so they haven't
been able to come up with better values. Given that you created this
patch for a fairly old SoC and the values are still usable on rk3568 I
think that's the way to go.

> 
> I'll also say that when I did a rebase of veyron (rk3288-based
> Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
> of these patches into 1. That can be found at
> <https://crrev.com/c/1661056>. That also has details about why some of
> these patches never made it upstream. The main reason, at least in the
> case of rk3288, was the PLL sharing problem that nobody ever solved.
> rk3288 didn't have quite enough PLLs and thus, if you were using both
> VOPs, one of the VOPs was going to be severely limited in what pixel
> clocks it could make. There was no framework deciding which VOP should
> be limited and how the system should react to this...
> 
> 
> In any case, I'm pretty far disconnected from all this stuff now, but
> I wish you the best of luck in trying to get it all solved!

Nah, sorry, I won't get that all solved ;)

I am not that interested in rk3288, my main concern is the rk3568. That
one has two spare PLLs for three heads instead of one PLL for two heads,
so the problem is less pressing.

I'll stick to this version of the patch instead of the combined one
because this patch seems to be correct regardless of the PLL problem.

Thanks for the link though, it gives me some insights why things are the
way they are currently.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:54:53AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders at chromium.org>
> >
> > The previous tables for mpll_cfg and curr_ctrl were created using the
> > 20-pages of example settings provided by the PHY vendor.  Those
> > example settings weren't particularly dense, so there were places
> > where we were guessing what the settings would be for 10-bit and
> > 12-bit (not that we use those anyway).  It was also always a lot of
> > extra work every time we wanted to add a new clock rate since we had
> > to cross-reference several tables.
> >
> > In <http://crosreview.com/285855> I've gone through the work to figure
> 
> The `crosreview.com` syntax doesn't seem to work anymore. Could maybe
> update to https://crrev.com/c/285855 ?

did that, thanks.

> 
> > out how to generate this table automatically.  Let's now use the
> > automatically generated table and then we'll never need to look at it
> > again.
> >
> > We only support 8-bit mode right now and only support a small number
> > of clock rates and and I've verified that the only 8-bit rate that was
> > affected was 148.5.  That mode appears to have been wrong in the old
> > table.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders at chromium.org>
> > Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> 
> Should probably change the "at" to "@" ?

yes.

> 
> > Reviewed-by: Stéphane Marchesin <marcheu at chromium.org>
> 
> In general shouldn't carry downstream reviews when posting upstream
> unless you're certain that the person intended it...
> 
> 
> It's been a long time, but in general I think I was fairly confident
> in the numbers that my script pumped out, at least given the caveat of
> no pixel repetition and 8-bit only. That being said, I didn't have any
> inside knowledge of the hardware and just figured out formulas that
> seemed to match the table that I had. YMMV.

Rockchip adopted this patch for their downstream Kernel, so they haven't
been able to come up with better values. Given that you created this
patch for a fairly old SoC and the values are still usable on rk3568 I
think that's the way to go.

> 
> I'll also say that when I did a rebase of veyron (rk3288-based
> Chromebook) to 4.19 about 2.5 years ago, I ended up squashing several
> of these patches into 1. That can be found at
> <https://crrev.com/c/1661056>. That also has details about why some of
> these patches never made it upstream. The main reason, at least in the
> case of rk3288, was the PLL sharing problem that nobody ever solved.
> rk3288 didn't have quite enough PLLs and thus, if you were using both
> VOPs, one of the VOPs was going to be severely limited in what pixel
> clocks it could make. There was no framework deciding which VOP should
> be limited and how the system should react to this...
> 
> 
> In any case, I'm pretty far disconnected from all this stuff now, but
> I wish you the best of luck in trying to get it all solved!

Nah, sorry, I won't get that all solved ;)

I am not that interested in rk3288, my main concern is the rk3568. That
one has two spare PLLs for three heads instead of one PLL for two heads,
so the problem is less pressing.

I'll stick to this version of the patch instead of the combined one
because this patch seems to be correct regardless of the PLL problem.

Thanks for the link though, it gives me some insights why things are the
way they are currently.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 08/27] drm/rockchip: dw_hdmi: drop mode_valid hook

[Sascha Hauer]

The driver checks if the pixel clock of the given mode matches an entry
in the mpll config table. The frequencies in the mpll table are meant as
a frequency range up to which the entry works, not as a frequency that
must match the pixel clock. The downstream Kernel also does not have
this check, so drop it to allow for more display resolutions.

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ---------------------
 1 file changed, 25 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 160107b333ef..c44eb4d2e2d5 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -256,26 +256,6 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	return 0;
 }
 
-static enum drm_mode_status
-dw_hdmi_rockchip_mode_valid(struct dw_hdmi *hdmi, void *data,
-			    const struct drm_display_info *info,
-			    const struct drm_display_mode *mode)
-{
-	const struct dw_hdmi_mpll_config *mpll_cfg = rockchip_mpll_cfg;
-	int pclk = mode->clock * 1000;
-	bool valid = false;
-	int i;
-
-	for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++) {
-		if (pclk == mpll_cfg[i].mpixelclock) {
-			valid = true;
-			break;
-		}
-	}
-
-	return (valid) ? MODE_OK : MODE_BAD;
-}
-
 static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
 {
 }
@@ -441,7 +421,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -458,7 +437,6 @@ static struct rockchip_hdmi_chip_data rk3288_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3288_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -478,7 +456,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -496,7 +473,6 @@ static struct rockchip_hdmi_chip_data rk3399_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -509,7 +485,6 @@ static struct rockchip_hdmi_chip_data rk3568_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
-- 
2.30.2

[PATCH 08/27] drm/rockchip: dw_hdmi: drop mode_valid hook

[Sascha Hauer]

The driver checks if the pixel clock of the given mode matches an entry
in the mpll config table. The frequencies in the mpll table are meant as
a frequency range up to which the entry works, not as a frequency that
must match the pixel clock. The downstream Kernel also does not have
this check, so drop it to allow for more display resolutions.

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ---------------------
 1 file changed, 25 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 160107b333ef..c44eb4d2e2d5 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -256,26 +256,6 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	return 0;
 }
 
-static enum drm_mode_status
-dw_hdmi_rockchip_mode_valid(struct dw_hdmi *hdmi, void *data,
-			    const struct drm_display_info *info,
-			    const struct drm_display_mode *mode)
-{
-	const struct dw_hdmi_mpll_config *mpll_cfg = rockchip_mpll_cfg;
-	int pclk = mode->clock * 1000;
-	bool valid = false;
-	int i;
-
-	for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++) {
-		if (pclk == mpll_cfg[i].mpixelclock) {
-			valid = true;
-			break;
-		}
-	}
-
-	return (valid) ? MODE_OK : MODE_BAD;
-}
-
 static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
 {
 }
@@ -441,7 +421,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -458,7 +437,6 @@ static struct rockchip_hdmi_chip_data rk3288_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3288_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -478,7 +456,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -496,7 +473,6 @@ static struct rockchip_hdmi_chip_data rk3399_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -509,7 +485,6 @@ static struct rockchip_hdmi_chip_data rk3568_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 08/27] drm/rockchip: dw_hdmi: drop mode_valid hook

[Sascha Hauer]

The driver checks if the pixel clock of the given mode matches an entry
in the mpll config table. The frequencies in the mpll table are meant as
a frequency range up to which the entry works, not as a frequency that
must match the pixel clock. The downstream Kernel also does not have
this check, so drop it to allow for more display resolutions.

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ---------------------
 1 file changed, 25 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 160107b333ef..c44eb4d2e2d5 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -256,26 +256,6 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	return 0;
 }
 
-static enum drm_mode_status
-dw_hdmi_rockchip_mode_valid(struct dw_hdmi *hdmi, void *data,
-			    const struct drm_display_info *info,
-			    const struct drm_display_mode *mode)
-{
-	const struct dw_hdmi_mpll_config *mpll_cfg = rockchip_mpll_cfg;
-	int pclk = mode->clock * 1000;
-	bool valid = false;
-	int i;
-
-	for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++) {
-		if (pclk == mpll_cfg[i].mpixelclock) {
-			valid = true;
-			break;
-		}
-	}
-
-	return (valid) ? MODE_OK : MODE_BAD;
-}
-
 static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
 {
 }
@@ -441,7 +421,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -458,7 +437,6 @@ static struct rockchip_hdmi_chip_data rk3288_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3288_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -478,7 +456,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -496,7 +473,6 @@ static struct rockchip_hdmi_chip_data rk3399_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -509,7 +485,6 @@ static struct rockchip_hdmi_chip_data rk3568_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/27] drm/rockchip: dw_hdmi: drop mode_valid hook

[Sascha Hauer]

The driver checks if the pixel clock of the given mode matches an entry
in the mpll config table. The frequencies in the mpll table are meant as
a frequency range up to which the entry works, not as a frequency that
must match the pixel clock. The downstream Kernel also does not have
this check, so drop it to allow for more display resolutions.

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ---------------------
 1 file changed, 25 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 160107b333ef..c44eb4d2e2d5 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -256,26 +256,6 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	return 0;
 }
 
-static enum drm_mode_status
-dw_hdmi_rockchip_mode_valid(struct dw_hdmi *hdmi, void *data,
-			    const struct drm_display_info *info,
-			    const struct drm_display_mode *mode)
-{
-	const struct dw_hdmi_mpll_config *mpll_cfg = rockchip_mpll_cfg;
-	int pclk = mode->clock * 1000;
-	bool valid = false;
-	int i;
-
-	for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++) {
-		if (pclk == mpll_cfg[i].mpixelclock) {
-			valid = true;
-			break;
-		}
-	}
-
-	return (valid) ? MODE_OK : MODE_BAD;
-}
-
 static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder)
 {
 }
@@ -441,7 +421,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -458,7 +437,6 @@ static struct rockchip_hdmi_chip_data rk3288_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3288_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -478,7 +456,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg = rockchip_mpll_cfg,
 	.cur_ctr = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -496,7 +473,6 @@ static struct rockchip_hdmi_chip_data rk3399_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3399_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
@@ -509,7 +485,6 @@ static struct rockchip_hdmi_chip_data rk3568_chip_data = {
 };
 
 static const struct dw_hdmi_plat_data rk3568_hdmi_drv_data = {
-	.mode_valid = dw_hdmi_rockchip_mode_valid,
 	.mpll_cfg   = rockchip_mpll_cfg,
 	.cur_ctr    = rockchip_cur_ctr,
 	.phy_config = rockchip_phy_config,
-- 
2.30.2

[PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

From: Douglas Anderson <dianders@chromium.org>

Jitter was improved by lowering the MPLL bandwidth to account for high
frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
lowered only enough to get us a comfortable margin.  We believe that
lowering the bandwidth like this is safe given sufficient testing.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9223301/)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index c44eb4d2e2d5..77f82a4fd027 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 	/*      pixelclk    bpp8    bpp10   bpp12 */
 	{
-		40000000,  { 0x0018, 0x0018, 0x0018 },
-	}, {
-		65000000,  { 0x0028, 0x0028, 0x0028 },
-	}, {
-		66000000,  { 0x0038, 0x0038, 0x0038 },
-	}, {
-		74250000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		83500000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		146250000, { 0x0038, 0x0038, 0x0038 },
-	}, {
-		148500000, { 0x0000, 0x0038, 0x0038 },
-	}, {
+		600000000, { 0x0000, 0x0000, 0x0000 },
+	},  {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
 };
-- 
2.30.2

[PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

From: Douglas Anderson <dianders@chromium.org>

Jitter was improved by lowering the MPLL bandwidth to account for high
frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
lowered only enough to get us a comfortable margin.  We believe that
lowering the bandwidth like this is safe given sufficient testing.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9223301/)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index c44eb4d2e2d5..77f82a4fd027 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 	/*      pixelclk    bpp8    bpp10   bpp12 */
 	{
-		40000000,  { 0x0018, 0x0018, 0x0018 },
-	}, {
-		65000000,  { 0x0028, 0x0028, 0x0028 },
-	}, {
-		66000000,  { 0x0038, 0x0038, 0x0038 },
-	}, {
-		74250000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		83500000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		146250000, { 0x0038, 0x0038, 0x0038 },
-	}, {
-		148500000, { 0x0000, 0x0038, 0x0038 },
-	}, {
+		600000000, { 0x0000, 0x0000, 0x0000 },
+	},  {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
 };
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

From: Douglas Anderson <dianders@chromium.org>

Jitter was improved by lowering the MPLL bandwidth to account for high
frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
lowered only enough to get us a comfortable margin.  We believe that
lowering the bandwidth like this is safe given sufficient testing.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9223301/)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index c44eb4d2e2d5..77f82a4fd027 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 	/*      pixelclk    bpp8    bpp10   bpp12 */
 	{
-		40000000,  { 0x0018, 0x0018, 0x0018 },
-	}, {
-		65000000,  { 0x0028, 0x0028, 0x0028 },
-	}, {
-		66000000,  { 0x0038, 0x0038, 0x0038 },
-	}, {
-		74250000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		83500000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		146250000, { 0x0038, 0x0038, 0x0038 },
-	}, {
-		148500000, { 0x0000, 0x0038, 0x0038 },
-	}, {
+		600000000, { 0x0000, 0x0000, 0x0000 },
+	},  {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
 };
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

From: Douglas Anderson <dianders@chromium.org>

Jitter was improved by lowering the MPLL bandwidth to account for high
frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
lowered only enough to get us a comfortable margin.  We believe that
lowering the bandwidth like this is safe given sufficient testing.

Changes since v3:
- new patch

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9223301/)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index c44eb4d2e2d5..77f82a4fd027 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 	/*      pixelclk    bpp8    bpp10   bpp12 */
 	{
-		40000000,  { 0x0018, 0x0018, 0x0018 },
-	}, {
-		65000000,  { 0x0028, 0x0028, 0x0028 },
-	}, {
-		66000000,  { 0x0038, 0x0038, 0x0038 },
-	}, {
-		74250000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		83500000,  { 0x0028, 0x0038, 0x0038 },
-	}, {
-		146250000, { 0x0038, 0x0038, 0x0038 },
-	}, {
-		148500000, { 0x0000, 0x0038, 0x0038 },
-	}, {
+		600000000, { 0x0000, 0x0000, 0x0000 },
+	},  {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
 };
-- 
2.30.2

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders@chromium.org>
>
> Jitter was improved by lowering the MPLL bandwidth to account for high
> frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> lowered only enough to get us a comfortable margin.  We believe that
> lowering the bandwidth like this is safe given sufficient testing.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> (am from https://patchwork.kernel.org/patch/9223301/)

Probably remove the "am from" line? It's not standard in upstream and
that link doesn't seem to go anywhere anymore...


> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> index c44eb4d2e2d5..77f82a4fd027 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
>  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
>         /*      pixelclk    bpp8    bpp10   bpp12 */
>         {
> -               40000000,  { 0x0018, 0x0018, 0x0018 },
> -       }, {
> -               65000000,  { 0x0028, 0x0028, 0x0028 },
> -       }, {
> -               66000000,  { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               74250000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               83500000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               146250000, { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               148500000, { 0x0000, 0x0038, 0x0038 },
> -       }, {
> +               600000000, { 0x0000, 0x0000, 0x0000 },
> +       },  {

This is what we did for rk3288. I can't personally vouch for the
effects on other SoCs.

-Doug

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders@chromium.org>
>
> Jitter was improved by lowering the MPLL bandwidth to account for high
> frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> lowered only enough to get us a comfortable margin.  We believe that
> lowering the bandwidth like this is safe given sufficient testing.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> (am from https://patchwork.kernel.org/patch/9223301/)

Probably remove the "am from" line? It's not standard in upstream and
that link doesn't seem to go anywhere anymore...


> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> index c44eb4d2e2d5..77f82a4fd027 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
>  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
>         /*      pixelclk    bpp8    bpp10   bpp12 */
>         {
> -               40000000,  { 0x0018, 0x0018, 0x0018 },
> -       }, {
> -               65000000,  { 0x0028, 0x0028, 0x0028 },
> -       }, {
> -               66000000,  { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               74250000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               83500000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               146250000, { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               148500000, { 0x0000, 0x0038, 0x0038 },
> -       }, {
> +               600000000, { 0x0000, 0x0000, 0x0000 },
> +       },  {

This is what we did for rk3288. I can't personally vouch for the
effects on other SoCs.

-Doug

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders@chromium.org>
>
> Jitter was improved by lowering the MPLL bandwidth to account for high
> frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> lowered only enough to get us a comfortable margin.  We believe that
> lowering the bandwidth like this is safe given sufficient testing.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> (am from https://patchwork.kernel.org/patch/9223301/)

Probably remove the "am from" line? It's not standard in upstream and
that link doesn't seem to go anywhere anymore...


> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> index c44eb4d2e2d5..77f82a4fd027 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
>  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
>         /*      pixelclk    bpp8    bpp10   bpp12 */
>         {
> -               40000000,  { 0x0018, 0x0018, 0x0018 },
> -       }, {
> -               65000000,  { 0x0028, 0x0028, 0x0028 },
> -       }, {
> -               66000000,  { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               74250000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               83500000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               146250000, { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               148500000, { 0x0000, 0x0038, 0x0038 },
> -       }, {
> +               600000000, { 0x0000, 0x0000, 0x0000 },
> +       },  {

This is what we did for rk3288. I can't personally vouch for the
effects on other SoCs.

-Doug

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Doug Anderson]

Hi,

On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> From: Douglas Anderson <dianders@chromium.org>
>
> Jitter was improved by lowering the MPLL bandwidth to account for high
> frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> lowered only enough to get us a comfortable margin.  We believe that
> lowering the bandwidth like this is safe given sufficient testing.
>
> Changes since v3:
> - new patch
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> (am from https://patchwork.kernel.org/patch/9223301/)

Probably remove the "am from" line? It's not standard in upstream and
that link doesn't seem to go anywhere anymore...


> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> index c44eb4d2e2d5..77f82a4fd027 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
>  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
>         /*      pixelclk    bpp8    bpp10   bpp12 */
>         {
> -               40000000,  { 0x0018, 0x0018, 0x0018 },
> -       }, {
> -               65000000,  { 0x0028, 0x0028, 0x0028 },
> -       }, {
> -               66000000,  { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               74250000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               83500000,  { 0x0028, 0x0038, 0x0038 },
> -       }, {
> -               146250000, { 0x0038, 0x0038, 0x0038 },
> -       }, {
> -               148500000, { 0x0000, 0x0038, 0x0038 },
> -       }, {
> +               600000000, { 0x0000, 0x0000, 0x0000 },
> +       },  {

This is what we did for rk3288. I can't personally vouch for the
effects on other SoCs.

-Doug

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:42:48AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders@chromium.org>
> >
> > Jitter was improved by lowering the MPLL bandwidth to account for high
> > frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> > lowered only enough to get us a comfortable margin.  We believe that
> > lowering the bandwidth like this is safe given sufficient testing.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> > (am from https://patchwork.kernel.org/patch/9223301/)
> 
> Probably remove the "am from" line? It's not standard in upstream and
> that link doesn't seem to go anywhere anymore...
> 
> 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
> >  1 file changed, 2 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > index c44eb4d2e2d5..77f82a4fd027 100644
> > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
> >  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
> >         /*      pixelclk    bpp8    bpp10   bpp12 */
> >         {
> > -               40000000,  { 0x0018, 0x0018, 0x0018 },
> > -       }, {
> > -               65000000,  { 0x0028, 0x0028, 0x0028 },
> > -       }, {
> > -               66000000,  { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               74250000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               83500000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               146250000, { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               148500000, { 0x0000, 0x0038, 0x0038 },
> > -       }, {
> > +               600000000, { 0x0000, 0x0000, 0x0000 },
> > +       },  {
> 
> This is what we did for rk3288. I can't personally vouch for the
> effects on other SoCs.

Fair enough. Rockchip has this patch in their downstream Kernel, so I am
confident it works on SoCs newer as the rk3288 as well. I don't know how
much they care about the older SoCs, but it seems there is only the
rk3228 that is older than the rk3288 that is supported by this driver.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:42:48AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders@chromium.org>
> >
> > Jitter was improved by lowering the MPLL bandwidth to account for high
> > frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> > lowered only enough to get us a comfortable margin.  We believe that
> > lowering the bandwidth like this is safe given sufficient testing.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> > (am from https://patchwork.kernel.org/patch/9223301/)
> 
> Probably remove the "am from" line? It's not standard in upstream and
> that link doesn't seem to go anywhere anymore...
> 
> 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
> >  1 file changed, 2 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > index c44eb4d2e2d5..77f82a4fd027 100644
> > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
> >  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
> >         /*      pixelclk    bpp8    bpp10   bpp12 */
> >         {
> > -               40000000,  { 0x0018, 0x0018, 0x0018 },
> > -       }, {
> > -               65000000,  { 0x0028, 0x0028, 0x0028 },
> > -       }, {
> > -               66000000,  { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               74250000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               83500000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               146250000, { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               148500000, { 0x0000, 0x0038, 0x0038 },
> > -       }, {
> > +               600000000, { 0x0000, 0x0000, 0x0000 },
> > +       },  {
> 
> This is what we did for rk3288. I can't personally vouch for the
> effects on other SoCs.

Fair enough. Rockchip has this patch in their downstream Kernel, so I am
confident it works on SoCs newer as the rk3288 as well. I don't know how
much they care about the older SoCs, but it seems there is only the
rk3228 that is older than the rk3288 that is supported by this driver.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:42:48AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders@chromium.org>
> >
> > Jitter was improved by lowering the MPLL bandwidth to account for high
> > frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> > lowered only enough to get us a comfortable margin.  We believe that
> > lowering the bandwidth like this is safe given sufficient testing.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> > (am from https://patchwork.kernel.org/patch/9223301/)
> 
> Probably remove the "am from" line? It's not standard in upstream and
> that link doesn't seem to go anywhere anymore...
> 
> 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
> >  1 file changed, 2 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > index c44eb4d2e2d5..77f82a4fd027 100644
> > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
> >  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
> >         /*      pixelclk    bpp8    bpp10   bpp12 */
> >         {
> > -               40000000,  { 0x0018, 0x0018, 0x0018 },
> > -       }, {
> > -               65000000,  { 0x0028, 0x0028, 0x0028 },
> > -       }, {
> > -               66000000,  { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               74250000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               83500000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               146250000, { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               148500000, { 0x0000, 0x0038, 0x0038 },
> > -       }, {
> > +               600000000, { 0x0000, 0x0000, 0x0000 },
> > +       },  {
> 
> This is what we did for rk3288. I can't personally vouch for the
> effects on other SoCs.

Fair enough. Rockchip has this patch in their downstream Kernel, so I am
confident it works on SoCs newer as the rk3288 as well. I don't know how
much they care about the older SoCs, but it seems there is only the
rk3228 that is older than the rk3288 that is supported by this driver.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always

[Sascha Hauer]

On Wed, Jan 26, 2022 at 07:42:48AM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jan 26, 2022 at 6:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >
> > From: Douglas Anderson <dianders@chromium.org>
> >
> > Jitter was improved by lowering the MPLL bandwidth to account for high
> > frequency noise in the rk3288 PLL.  In each case MPLL bandwidth was
> > lowered only enough to get us a comfortable margin.  We believe that
> > lowering the bandwidth like this is safe given sufficient testing.
> >
> > Changes since v3:
> > - new patch
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> > (am from https://patchwork.kernel.org/patch/9223301/)
> 
> Probably remove the "am from" line? It's not standard in upstream and
> that link doesn't seem to go anywhere anymore...
> 
> 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++--------------
> >  1 file changed, 2 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > index c44eb4d2e2d5..77f82a4fd027 100644
> > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > @@ -176,20 +176,8 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
> >  static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
> >         /*      pixelclk    bpp8    bpp10   bpp12 */
> >         {
> > -               40000000,  { 0x0018, 0x0018, 0x0018 },
> > -       }, {
> > -               65000000,  { 0x0028, 0x0028, 0x0028 },
> > -       }, {
> > -               66000000,  { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               74250000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               83500000,  { 0x0028, 0x0038, 0x0038 },
> > -       }, {
> > -               146250000, { 0x0038, 0x0038, 0x0038 },
> > -       }, {
> > -               148500000, { 0x0000, 0x0038, 0x0038 },
> > -       }, {
> > +               600000000, { 0x0000, 0x0000, 0x0000 },
> > +       },  {
> 
> This is what we did for rk3288. I can't personally vouch for the
> effects on other SoCs.

Fair enough. Rockchip has this patch in their downstream Kernel, so I am
confident it works on SoCs newer as the rk3288 as well. I don't know how
much they care about the older SoCs, but it seems there is only the
rk3228 that is older than the rk3288 that is supported by this driver.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 10/27] drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

[Sascha Hauer]

From: Nickey Yang <nickey.yang@rock-chips.com>

add 594Mhz configuration parameters in rockchip_phy_config

Changes since v3:
- new patch

Change-Id: Iaa335cdd90059817fd9892877e574f8b84f2b5dc
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 77f82a4fd027..c038674271b2 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -187,6 +187,7 @@ static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
 	{ 74250000,  0x8009, 0x0004, 0x0272},
 	{ 148500000, 0x802b, 0x0004, 0x028d},
 	{ 297000000, 0x8039, 0x0005, 0x028d},
+	{ 594000000, 0x8039, 0x0000, 0x019d},
 	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 
-- 
2.30.2

[PATCH 10/27] drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

[Sascha Hauer]

From: Nickey Yang <nickey.yang@rock-chips.com>

add 594Mhz configuration parameters in rockchip_phy_config

Changes since v3:
- new patch

Change-Id: Iaa335cdd90059817fd9892877e574f8b84f2b5dc
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 77f82a4fd027..c038674271b2 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -187,6 +187,7 @@ static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
 	{ 74250000,  0x8009, 0x0004, 0x0272},
 	{ 148500000, 0x802b, 0x0004, 0x028d},
 	{ 297000000, 0x8039, 0x0005, 0x028d},
+	{ 594000000, 0x8039, 0x0000, 0x019d},
 	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 10/27] drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

[Sascha Hauer]

From: Nickey Yang <nickey.yang@rock-chips.com>

add 594Mhz configuration parameters in rockchip_phy_config

Changes since v3:
- new patch

Change-Id: Iaa335cdd90059817fd9892877e574f8b84f2b5dc
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 77f82a4fd027..c038674271b2 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -187,6 +187,7 @@ static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
 	{ 74250000,  0x8009, 0x0004, 0x0272},
 	{ 148500000, 0x802b, 0x0004, 0x028d},
 	{ 297000000, 0x8039, 0x0005, 0x028d},
+	{ 594000000, 0x8039, 0x0000, 0x019d},
 	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/27] drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz

[Sascha Hauer]

From: Nickey Yang <nickey.yang@rock-chips.com>

add 594Mhz configuration parameters in rockchip_phy_config

Changes since v3:
- new patch

Change-Id: Iaa335cdd90059817fd9892877e574f8b84f2b5dc
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 77f82a4fd027..c038674271b2 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -187,6 +187,7 @@ static const struct dw_hdmi_phy_config rockchip_phy_config[] = {
 	{ 74250000,  0x8009, 0x0004, 0x0272},
 	{ 148500000, 0x802b, 0x0004, 0x028d},
 	{ 297000000, 0x8039, 0x0005, 0x028d},
+	{ 594000000, 0x8039, 0x0000, 0x019d},
 	{ ~0UL,	     0x0000, 0x0000, 0x0000}
 };
 
-- 
2.30.2

[PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates

[Sascha Hauer]

This adds a few more PLL settings needed for some standard resolutions:

297MHz    3840x2160-30.00
241.5MHz  2560x1440-59.95
135MHz    1280x1024-75.02
119MHz    1680x1050-59.88
108MHz    1280x1024-60.02
 78.75MHz 1024x768-75.03

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 69a9e8069a48..9d889fc46811 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -71,11 +71,17 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0),
 	RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
 	RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
+	RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+	RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
 	RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
+	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
+	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
 	RK3036_PLL_RATE(100000000, 1, 150, 6, 6, 1, 0),
 	RK3036_PLL_RATE(96000000, 1, 96, 6, 4, 1, 0),
+	RK3036_PLL_RATE(78750000, 1, 96, 6, 4, 1, 0),
 	RK3036_PLL_RATE(74250000, 2, 99, 4, 4, 1, 0),
 	{ /* sentinel */ },
 };
-- 
2.30.2

[PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates

[Sascha Hauer]

This adds a few more PLL settings needed for some standard resolutions:

297MHz    3840x2160-30.00
241.5MHz  2560x1440-59.95
135MHz    1280x1024-75.02
119MHz    1680x1050-59.88
108MHz    1280x1024-60.02
 78.75MHz 1024x768-75.03

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 69a9e8069a48..9d889fc46811 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -71,11 +71,17 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0),
 	RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
 	RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
+	RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+	RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
 	RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
+	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
+	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
 	RK3036_PLL_RATE(100000000, 1, 150, 6, 6, 1, 0),
 	RK3036_PLL_RATE(96000000, 1, 96, 6, 4, 1, 0),
+	RK3036_PLL_RATE(78750000, 1, 96, 6, 4, 1, 0),
 	RK3036_PLL_RATE(74250000, 2, 99, 4, 4, 1, 0),
 	{ /* sentinel */ },
 };
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates

[Sascha Hauer]

This adds a few more PLL settings needed for some standard resolutions:

297MHz    3840x2160-30.00
241.5MHz  2560x1440-59.95
135MHz    1280x1024-75.02
119MHz    1680x1050-59.88
108MHz    1280x1024-60.02
 78.75MHz 1024x768-75.03

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 69a9e8069a48..9d889fc46811 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -71,11 +71,17 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0),
 	RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
 	RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
+	RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+	RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
 	RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
+	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
+	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
 	RK3036_PLL_RATE(100000000, 1, 150, 6, 6, 1, 0),
 	RK3036_PLL_RATE(96000000, 1, 96, 6, 4, 1, 0),
+	RK3036_PLL_RATE(78750000, 1, 96, 6, 4, 1, 0),
 	RK3036_PLL_RATE(74250000, 2, 99, 4, 4, 1, 0),
 	{ /* sentinel */ },
 };
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates

[Sascha Hauer]

This adds a few more PLL settings needed for some standard resolutions:

297MHz    3840x2160-30.00
241.5MHz  2560x1440-59.95
135MHz    1280x1024-75.02
119MHz    1680x1050-59.88
108MHz    1280x1024-60.02
 78.75MHz 1024x768-75.03

Changes since v3:
- new patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 69a9e8069a48..9d889fc46811 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -71,11 +71,17 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
 	RK3036_PLL_RATE(500000000, 1, 125, 6, 1, 1, 0),
 	RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
 	RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
+	RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+	RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
 	RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
 	RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
 	RK3036_PLL_RATE(148500000, 1, 99, 4, 4, 1, 0),
+	RK3036_PLL_RATE(135000000, 2, 45, 4, 1, 1, 0),
+	RK3036_PLL_RATE(119000000, 3, 119, 4, 2, 1, 0),
+	RK3036_PLL_RATE(108000000, 2, 45, 5, 1, 1, 0),
 	RK3036_PLL_RATE(100000000, 1, 150, 6, 6, 1, 0),
 	RK3036_PLL_RATE(96000000, 1, 96, 6, 4, 1, 0),
+	RK3036_PLL_RATE(78750000, 1, 96, 6, 4, 1, 0),
 	RK3036_PLL_RATE(74250000, 2, 99, 4, 4, 1, 0),
 	{ /* sentinel */ },
 };
-- 
2.30.2

[PATCH 12/27] dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMI

[Sascha Hauer]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

Define a new compatible for rk3568 HDMI.
This version of HDMI hardware block needs two new clocks hclk_vio and hclk
to provide phy reference clocks.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210707120323.401785-2-benjamin.gaignard@collabora.com
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..45cae4f57a1c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,6 +23,7 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
-- 
2.30.2

[PATCH 12/27] dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMI

[Sascha Hauer]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

Define a new compatible for rk3568 HDMI.
This version of HDMI hardware block needs two new clocks hclk_vio and hclk
to provide phy reference clocks.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210707120323.401785-2-benjamin.gaignard@collabora.com
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..45cae4f57a1c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,6 +23,7 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 12/27] dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMI

[Sascha Hauer]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

Define a new compatible for rk3568 HDMI.
This version of HDMI hardware block needs two new clocks hclk_vio and hclk
to provide phy reference clocks.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210707120323.401785-2-benjamin.gaignard@collabora.com
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..45cae4f57a1c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,6 +23,7 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 12/27] dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMI

[Sascha Hauer]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

Define a new compatible for rk3568 HDMI.
This version of HDMI hardware block needs two new clocks hclk_vio and hclk
to provide phy reference clocks.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210707120323.401785-2-benjamin.gaignard@collabora.com
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..45cae4f57a1c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,6 +23,7 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
-- 
2.30.2

[PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Sascha Hauer]

None of the upstream device tree files has a "unwedge" pinctrl
specified. Make it optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 45cae4f57a1c..6e09dd2ee05a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -73,6 +73,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
-- 
2.30.2

[PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Sascha Hauer]

None of the upstream device tree files has a "unwedge" pinctrl
specified. Make it optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 45cae4f57a1c..6e09dd2ee05a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -73,6 +73,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Sascha Hauer]

None of the upstream device tree files has a "unwedge" pinctrl
specified. Make it optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 45cae4f57a1c..6e09dd2ee05a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -73,6 +73,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Sascha Hauer]

None of the upstream device tree files has a "unwedge" pinctrl
specified. Make it optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 45cae4f57a1c..6e09dd2ee05a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -73,6 +73,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
-- 
2.30.2

Re: [PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Rob Herring]

On Wed, 26 Jan 2022 15:55:35 +0100, Sascha Hauer wrote:
> None of the upstream device tree files has a "unwedge" pinctrl
> specified. Make it optional.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Rob Herring]

On Wed, 26 Jan 2022 15:55:35 +0100, Sascha Hauer wrote:
> None of the upstream device tree files has a "unwedge" pinctrl
> specified. Make it optional.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Rob Herring]

On Wed, 26 Jan 2022 15:55:35 +0100, Sascha Hauer wrote:
> None of the upstream device tree files has a "unwedge" pinctrl
> specified. Make it optional.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional

[Rob Herring]

On Wed, 26 Jan 2022 15:55:35 +0100, Sascha Hauer wrote:
> None of the upstream device tree files has a "unwedge" pinctrl
> specified. Make it optional.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
This patch adds "ref" as a new alternative clock name for "vpll"

Changes since v3:
- Keep old clock name for compatibility reasons

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 6e09dd2ee05a..638119924ad8 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -37,7 +37,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -48,10 +49,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2

[PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
This patch adds "ref" as a new alternative clock name for "vpll"

Changes since v3:
- Keep old clock name for compatibility reasons

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 6e09dd2ee05a..638119924ad8 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -37,7 +37,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -48,10 +49,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
This patch adds "ref" as a new alternative clock name for "vpll"

Changes since v3:
- Keep old clock name for compatibility reasons

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 6e09dd2ee05a..638119924ad8 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -37,7 +37,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -48,10 +49,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Sascha Hauer]

"vpll" is a misnomer. A clock input to a device should be named after
the usage in the device, not after the clock that drives it. On the
rk3568 the same clock is driven by the HPLL.
This patch adds "ref" as a new alternative clock name for "vpll"

Changes since v3:
- Keep old clock name for compatibility reasons

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 6e09dd2ee05a..638119924ad8 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -37,7 +37,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -48,10 +49,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2

Re: [PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Rob Herring]

On Wed, 26 Jan 2022 15:55:36 +0100, Sascha Hauer wrote:
> "vpll" is a misnomer. A clock input to a device should be named after
> the usage in the device, not after the clock that drives it. On the
> rk3568 the same clock is driven by the HPLL.
> This patch adds "ref" as a new alternative clock name for "vpll"
> 
> Changes since v3:
> - Keep old clock name for compatibility reasons
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Rob Herring]

On Wed, 26 Jan 2022 15:55:36 +0100, Sascha Hauer wrote:
> "vpll" is a misnomer. A clock input to a device should be named after
> the usage in the device, not after the clock that drives it. On the
> rk3568 the same clock is driven by the HPLL.
> This patch adds "ref" as a new alternative clock name for "vpll"
> 
> Changes since v3:
> - Keep old clock name for compatibility reasons
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Rob Herring]

On Wed, 26 Jan 2022 15:55:36 +0100, Sascha Hauer wrote:
> "vpll" is a misnomer. A clock input to a device should be named after
> the usage in the device, not after the clock that drives it. On the
> rk3568 the same clock is driven by the HPLL.
> This patch adds "ref" as a new alternative clock name for "vpll"
> 
> Changes since v3:
> - Keep old clock name for compatibility reasons
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name

[Rob Herring]

On Wed, 26 Jan 2022 15:55:36 +0100, Sascha Hauer wrote:
> "vpll" is a misnomer. A clock input to a device should be named after
> the usage in the device, not after the clock that drives it. On the
> rk3568 the same clock is driven by the HPLL.
> This patch adds "ref" as a new alternative clock name for "vpll"
> 
> Changes since v3:
> - Keep old clock name for compatibility reasons
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml      | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
needed for the HDMI port. Add the binding for these supplies.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 638119924ad8..d7cb2b2be60e 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -28,6 +28,17 @@ properties:
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
-- 
2.30.2

[PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
needed for the HDMI port. Add the binding for these supplies.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 638119924ad8..d7cb2b2be60e 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -28,6 +28,17 @@ properties:
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
needed for the HDMI port. Add the binding for these supplies.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 638119924ad8..d7cb2b2be60e 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -28,6 +28,17 @@ properties:
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Sascha Hauer]

The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
needed for the HDMI port. Add the binding for these supplies.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 638119924ad8..d7cb2b2be60e 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -28,6 +28,17 @@ properties:
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
-- 
2.30.2

Re: [PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Rob Herring]

On Wed, 26 Jan 2022 15:55:37 +0100, Sascha Hauer wrote:
> The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
> needed for the HDMI port. Add the binding for these supplies.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Rob Herring]

On Wed, 26 Jan 2022 15:55:37 +0100, Sascha Hauer wrote:
> The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
> needed for the HDMI port. Add the binding for these supplies.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Rob Herring]

On Wed, 26 Jan 2022 15:55:37 +0100, Sascha Hauer wrote:
> The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
> needed for the HDMI port. Add the binding for these supplies.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support

[Rob Herring]

On Wed, 26 Jan 2022 15:55:37 +0100, Sascha Hauer wrote:
> The RK3568 has HDMI_TX_AVDD0V9 and HDMI_TX_AVDD_1V8 supply inputs
> needed for the HDMI port. Add the binding for these supplies.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index d7cb2b2be60e..7dd753630b46 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -44,12 +44,13 @@ properties:
     items:
       - {}
       - {}
-      # The next three clocks are all optional, but shall be specified in this
+      # The next four clocks are all optional, but shall be specified in this
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
       - description: External clock for some HDMI PHY (old clock name, deprecated)
       - description: External clock for some HDMI PHY (new name)
+      - description: hclk
 
   clock-names:
     minItems: 2
@@ -61,13 +62,17 @@ properties:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - vpll
           - ref
+          - hclk
+      - const: hclk
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2

[PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index d7cb2b2be60e..7dd753630b46 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -44,12 +44,13 @@ properties:
     items:
       - {}
       - {}
-      # The next three clocks are all optional, but shall be specified in this
+      # The next four clocks are all optional, but shall be specified in this
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
       - description: External clock for some HDMI PHY (old clock name, deprecated)
       - description: External clock for some HDMI PHY (new name)
+      - description: hclk
 
   clock-names:
     minItems: 2
@@ -61,13 +62,17 @@ properties:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - vpll
           - ref
+          - hclk
+      - const: hclk
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index d7cb2b2be60e..7dd753630b46 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -44,12 +44,13 @@ properties:
     items:
       - {}
       - {}
-      # The next three clocks are all optional, but shall be specified in this
+      # The next four clocks are all optional, but shall be specified in this
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
       - description: External clock for some HDMI PHY (old clock name, deprecated)
       - description: External clock for some HDMI PHY (new name)
+      - description: hclk
 
   clock-names:
     minItems: 2
@@ -61,13 +62,17 @@ properties:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - vpll
           - ref
+          - hclk
+      - const: hclk
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Sascha Hauer]

The rk3568 HDMI has an additional clock that needs to be enabled for the
HDMI controller to work. The purpose of that clock is not clear. It is
named "hclk" in the downstream driver, so use the same name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index d7cb2b2be60e..7dd753630b46 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -44,12 +44,13 @@ properties:
     items:
       - {}
       - {}
-      # The next three clocks are all optional, but shall be specified in this
+      # The next four clocks are all optional, but shall be specified in this
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
       - description: External clock for some HDMI PHY (old clock name, deprecated)
       - description: External clock for some HDMI PHY (new name)
+      - description: hclk
 
   clock-names:
     minItems: 2
@@ -61,13 +62,17 @@ properties:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - grf
           - vpll
           - ref
+          - hclk
       - enum:
           - vpll
           - ref
+          - hclk
+      - const: hclk
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
-- 
2.30.2

Re: [PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Rob Herring]

On Wed, 26 Jan 2022 15:55:38 +0100, Sascha Hauer wrote:
> The rk3568 HDMI has an additional clock that needs to be enabled for the
> HDMI controller to work. The purpose of that clock is not clear. It is
> named "hclk" in the downstream driver, so use the same name.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Rob Herring]

On Wed, 26 Jan 2022 15:55:38 +0100, Sascha Hauer wrote:
> The rk3568 HDMI has an additional clock that needs to be enabled for the
> HDMI controller to work. The purpose of that clock is not clear. It is
> named "hclk" in the downstream driver, so use the same name.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Rob Herring]

On Wed, 26 Jan 2022 15:55:38 +0100, Sascha Hauer wrote:
> The rk3568 HDMI has an additional clock that needs to be enabled for the
> HDMI controller to work. The purpose of that clock is not clear. It is
> named "hclk" in the downstream driver, so use the same name.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock

[Rob Herring]

On Wed, 26 Jan 2022 15:55:38 +0100, Sascha Hauer wrote:
> The rk3568 HDMI has an additional clock that needs to be enabled for the
> HDMI controller to work. The purpose of that clock is not clear. It is
> named "hclk" in the downstream driver, so use the same name.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../bindings/display/rockchip/rockchip,dw-hdmi.yaml        | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Sascha Hauer]

The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
The binding differs slightly from the existing VOP binding, so add a new
binding file for it.

Changes since v3:
- drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..572cfb307c20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk_vop",
+                              "hclk_vop",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
-- 
2.30.2

[PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Sascha Hauer]

The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
The binding differs slightly from the existing VOP binding, so add a new
binding file for it.

Changes since v3:
- drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..572cfb307c20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk_vop",
+                              "hclk_vop",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Sascha Hauer]

The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
The binding differs slightly from the existing VOP binding, so add a new
binding file for it.

Changes since v3:
- drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..572cfb307c20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk_vop",
+                              "hclk_vop",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Sascha Hauer]

The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
The binding differs slightly from the existing VOP binding, so add a new
binding file for it.

Changes since v3:
- drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..572cfb307c20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk_vop",
+                              "hclk_vop",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
-- 
2.30.2

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, 26 Jan 2022 15:55:39 +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:0: 'aclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:1: 'hclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1584511

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, 26 Jan 2022 15:55:39 +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:0: 'aclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:1: 'hclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1584511

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, 26 Jan 2022 15:55:39 +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:0: 'aclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:1: 'hclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1584511

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, 26 Jan 2022 15:55:39 +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:0: 'aclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.example.dt.yaml: vop@fe040000: clock-names:1: 'hclk' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1584511

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, Jan 26, 2022 at 03:55:39PM +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> new file mode 100644
> index 000000000000..572cfb307c20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoC display controller (VOP2)
> +
> +description:
> +  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
> +  series of SoCs which transfers the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Sandy Huang <hjc@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3566-vop
> +      - rockchip,rk3568-vop
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description:
> +          Must contain one entry corresponding to the base address and length
> +          of the register space.
> +      - description:
> +          Can optionally contain a second entry corresponding to
> +          the CRTC gamma LUT address.
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The VOP interrupt is shared by several interrupt sources, such as
> +      frame start (VSYNC), line flag and other status interrupts.
> +
> +  clocks:
> +    items:
> +      - description: Clock for ddr buffer transfer.
> +      - description: Clock for the ahb bus to R/W the phy regs.
> +      - description: Pixel clock for video port 0.
> +      - description: Pixel clock for video port 1.
> +      - description: Pixel clock for video port 2.
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: dclk_vp0
> +      - const: dclk_vp1
> +      - const: dclk_vp2
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to GRF regs used for misc control
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP0
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP1
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP2
> +

> +  assigned-clocks: true
> +
> +  assigned-clock-rates: true
> +
> +  assigned-clock-parents: true

You can drop these. They are implicitly allowed with 'clocks'.

> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/rk3568-cru.h>
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        #include <dt-bindings/power/rk3568-power.h>
> +        bus {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            vop: vop@fe040000 {
> +                compatible = "rockchip,rk3568-vop";
> +                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
> +                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cru ACLK_VOP>,
> +                         <&cru HCLK_VOP>,
> +                         <&cru DCLK_VOP0>,
> +                         <&cru DCLK_VOP1>,
> +                         <&cru DCLK_VOP2>;
> +                clock-names = "aclk_vop",
> +                              "hclk_vop",
> +                              "dclk_vp0",
> +                              "dclk_vp1",
> +                              "dclk_vp2";
> +                power-domains = <&power RK3568_PD_VO>;
> +                iommus = <&vop_mmu>;
> +                vop_out: ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    vp0: port@0 {
> +                        reg = <0>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp1: port@1 {
> +                        reg = <1>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp2: port@2 {
> +                        reg = <2>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                };
> +            };
> +        };
> -- 
> 2.30.2
> 
> 

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, Jan 26, 2022 at 03:55:39PM +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> new file mode 100644
> index 000000000000..572cfb307c20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoC display controller (VOP2)
> +
> +description:
> +  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
> +  series of SoCs which transfers the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Sandy Huang <hjc@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3566-vop
> +      - rockchip,rk3568-vop
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description:
> +          Must contain one entry corresponding to the base address and length
> +          of the register space.
> +      - description:
> +          Can optionally contain a second entry corresponding to
> +          the CRTC gamma LUT address.
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The VOP interrupt is shared by several interrupt sources, such as
> +      frame start (VSYNC), line flag and other status interrupts.
> +
> +  clocks:
> +    items:
> +      - description: Clock for ddr buffer transfer.
> +      - description: Clock for the ahb bus to R/W the phy regs.
> +      - description: Pixel clock for video port 0.
> +      - description: Pixel clock for video port 1.
> +      - description: Pixel clock for video port 2.
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: dclk_vp0
> +      - const: dclk_vp1
> +      - const: dclk_vp2
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to GRF regs used for misc control
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP0
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP1
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP2
> +

> +  assigned-clocks: true
> +
> +  assigned-clock-rates: true
> +
> +  assigned-clock-parents: true

You can drop these. They are implicitly allowed with 'clocks'.

> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/rk3568-cru.h>
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        #include <dt-bindings/power/rk3568-power.h>
> +        bus {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            vop: vop@fe040000 {
> +                compatible = "rockchip,rk3568-vop";
> +                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
> +                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cru ACLK_VOP>,
> +                         <&cru HCLK_VOP>,
> +                         <&cru DCLK_VOP0>,
> +                         <&cru DCLK_VOP1>,
> +                         <&cru DCLK_VOP2>;
> +                clock-names = "aclk_vop",
> +                              "hclk_vop",
> +                              "dclk_vp0",
> +                              "dclk_vp1",
> +                              "dclk_vp2";
> +                power-domains = <&power RK3568_PD_VO>;
> +                iommus = <&vop_mmu>;
> +                vop_out: ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    vp0: port@0 {
> +                        reg = <0>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp1: port@1 {
> +                        reg = <1>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp2: port@2 {
> +                        reg = <2>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                };
> +            };
> +        };
> -- 
> 2.30.2
> 
> 

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, Jan 26, 2022 at 03:55:39PM +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> new file mode 100644
> index 000000000000..572cfb307c20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoC display controller (VOP2)
> +
> +description:
> +  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
> +  series of SoCs which transfers the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Sandy Huang <hjc@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3566-vop
> +      - rockchip,rk3568-vop
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description:
> +          Must contain one entry corresponding to the base address and length
> +          of the register space.
> +      - description:
> +          Can optionally contain a second entry corresponding to
> +          the CRTC gamma LUT address.
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The VOP interrupt is shared by several interrupt sources, such as
> +      frame start (VSYNC), line flag and other status interrupts.
> +
> +  clocks:
> +    items:
> +      - description: Clock for ddr buffer transfer.
> +      - description: Clock for the ahb bus to R/W the phy regs.
> +      - description: Pixel clock for video port 0.
> +      - description: Pixel clock for video port 1.
> +      - description: Pixel clock for video port 2.
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: dclk_vp0
> +      - const: dclk_vp1
> +      - const: dclk_vp2
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to GRF regs used for misc control
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP0
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP1
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP2
> +

> +  assigned-clocks: true
> +
> +  assigned-clock-rates: true
> +
> +  assigned-clock-parents: true

You can drop these. They are implicitly allowed with 'clocks'.

> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/rk3568-cru.h>
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        #include <dt-bindings/power/rk3568-power.h>
> +        bus {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            vop: vop@fe040000 {
> +                compatible = "rockchip,rk3568-vop";
> +                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
> +                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cru ACLK_VOP>,
> +                         <&cru HCLK_VOP>,
> +                         <&cru DCLK_VOP0>,
> +                         <&cru DCLK_VOP1>,
> +                         <&cru DCLK_VOP2>;
> +                clock-names = "aclk_vop",
> +                              "hclk_vop",
> +                              "dclk_vp0",
> +                              "dclk_vp1",
> +                              "dclk_vp2";
> +                power-domains = <&power RK3568_PD_VO>;
> +                iommus = <&vop_mmu>;
> +                vop_out: ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    vp0: port@0 {
> +                        reg = <0>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp1: port@1 {
> +                        reg = <1>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp2: port@2 {
> +                        reg = <2>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                };
> +            };
> +        };
> -- 
> 2.30.2
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2

[Rob Herring]

On Wed, Jan 26, 2022 at 03:55:39PM +0100, Sascha Hauer wrote:
> The VOP2 is found on newer Rockchip SoCs like the rk3568 or the rk3566.
> The binding differs slightly from the existing VOP binding, so add a new
> binding file for it.
> 
> Changes since v3:
> - drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../display/rockchip/rockchip-vop2.yaml       | 146 ++++++++++++++++++
>  1 file changed, 146 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> new file mode 100644
> index 000000000000..572cfb307c20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoC display controller (VOP2)
> +
> +description:
> +  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
> +  series of SoCs which transfers the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Sandy Huang <hjc@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3566-vop
> +      - rockchip,rk3568-vop
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description:
> +          Must contain one entry corresponding to the base address and length
> +          of the register space.
> +      - description:
> +          Can optionally contain a second entry corresponding to
> +          the CRTC gamma LUT address.
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The VOP interrupt is shared by several interrupt sources, such as
> +      frame start (VSYNC), line flag and other status interrupts.
> +
> +  clocks:
> +    items:
> +      - description: Clock for ddr buffer transfer.
> +      - description: Clock for the ahb bus to R/W the phy regs.
> +      - description: Pixel clock for video port 0.
> +      - description: Pixel clock for video port 1.
> +      - description: Pixel clock for video port 2.
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: dclk_vp0
> +      - const: dclk_vp1
> +      - const: dclk_vp2
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to GRF regs used for misc control
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP0
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP1
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of VP2
> +

> +  assigned-clocks: true
> +
> +  assigned-clock-rates: true
> +
> +  assigned-clock-parents: true

You can drop these. They are implicitly allowed with 'clocks'.

> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/clock/rk3568-cru.h>
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        #include <dt-bindings/power/rk3568-power.h>
> +        bus {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            vop: vop@fe040000 {
> +                compatible = "rockchip,rk3568-vop";
> +                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
> +                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cru ACLK_VOP>,
> +                         <&cru HCLK_VOP>,
> +                         <&cru DCLK_VOP0>,
> +                         <&cru DCLK_VOP1>,
> +                         <&cru DCLK_VOP2>;
> +                clock-names = "aclk_vop",
> +                              "hclk_vop",
> +                              "dclk_vp0",
> +                              "dclk_vp1",
> +                              "dclk_vp2";
> +                power-domains = <&power RK3568_PD_VO>;
> +                iommus = <&vop_mmu>;
> +                vop_out: ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    vp0: port@0 {
> +                        reg = <0>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp1: port@1 {
> +                        reg = <1>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                    vp2: port@2 {
> +                        reg = <2>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                    };
> +                };
> +            };
> +        };
> -- 
> 2.30.2
> 
> 

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks

[Sascha Hauer]

The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@ hdmi: hdmi@ff940000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2

[PATCH 18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks

[Sascha Hauer]

The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@ hdmi: hdmi@ff940000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks

[Sascha Hauer]

The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@ hdmi: hdmi@ff940000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks

[Sascha Hauer]

The binding specifies the clock order to "cec", "grf", "vpll". Reorder
the clocks accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@ hdmi: hdmi@ff940000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2

[PATCH 19/27] arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'

[Sascha Hauer]

The reference clock for the HDMI controller has been renamed to 'ref',
the previous 'vpll' name is only left for compatibility in the driver.
Rename the clock to the new name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 080457a68e3c..d0add619b0d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1884,7 +1884,7 @@ hdmi: hdmi@ff940000 {
 			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
 			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2

[PATCH 19/27] arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'

[Sascha Hauer]

The reference clock for the HDMI controller has been renamed to 'ref',
the previous 'vpll' name is only left for compatibility in the driver.
Rename the clock to the new name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 080457a68e3c..d0add619b0d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1884,7 +1884,7 @@ hdmi: hdmi@ff940000 {
 			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
 			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 19/27] arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'

[Sascha Hauer]

The reference clock for the HDMI controller has been renamed to 'ref',
the previous 'vpll' name is only left for compatibility in the driver.
Rename the clock to the new name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 080457a68e3c..d0add619b0d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1884,7 +1884,7 @@ hdmi: hdmi@ff940000 {
 			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
 			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 19/27] arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'

[Sascha Hauer]

The reference clock for the HDMI controller has been renamed to 'ref',
the previous 'vpll' name is only left for compatibility in the driver.
Rename the clock to the new name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 080457a68e3c..d0add619b0d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1884,7 +1884,7 @@ hdmi: hdmi@ff940000 {
 			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
 			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
-- 
2.30.2

[PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Sascha Hauer]

The VOP2 is the display output controller on the RK3568. Add the node
for it to the dtsi file along with the required display-subsystem node
and the iommu node.

changes since v3:
- Bring back gamma_lut regs
- Drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
 include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
 4 files changed, 73 insertions(+)
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
index 3839eef5e4f7..595fa2562cb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -18,3 +18,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a295f8..1e55efb6fcfd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -95,3 +95,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index a68033a23975..4008bd666d01 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -129,6 +130,11 @@ opp-1800000000 {
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
@@ -451,6 +457,51 @@ gmac1_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "regs", "gamma_lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
new file mode 100644
index 000000000000..0a87bc90564a
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip,vop2.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
+#define __DT_BINDINGS_ROCKCHIP_VOP2_H
+
+#define RK3568_VOP2_EP_RGB	0
+#define RK3568_VOP2_EP_HDMI	1
+#define RK3568_VOP2_EP_EDP	2
+#define RK3568_VOP2_EP_MIPI0	3
+#define RK3568_VOP2_EP_LVDS0	4
+#define RK3568_VOP2_EP_MIPI1	5
+#define RK3568_VOP2_EP_LVDS1	6
+
+#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
-- 
2.30.2

[PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Sascha Hauer]

The VOP2 is the display output controller on the RK3568. Add the node
for it to the dtsi file along with the required display-subsystem node
and the iommu node.

changes since v3:
- Bring back gamma_lut regs
- Drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
 include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
 4 files changed, 73 insertions(+)
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
index 3839eef5e4f7..595fa2562cb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -18,3 +18,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a295f8..1e55efb6fcfd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -95,3 +95,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index a68033a23975..4008bd666d01 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -129,6 +130,11 @@ opp-1800000000 {
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
@@ -451,6 +457,51 @@ gmac1_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "regs", "gamma_lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
new file mode 100644
index 000000000000..0a87bc90564a
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip,vop2.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
+#define __DT_BINDINGS_ROCKCHIP_VOP2_H
+
+#define RK3568_VOP2_EP_RGB	0
+#define RK3568_VOP2_EP_HDMI	1
+#define RK3568_VOP2_EP_EDP	2
+#define RK3568_VOP2_EP_MIPI0	3
+#define RK3568_VOP2_EP_LVDS0	4
+#define RK3568_VOP2_EP_MIPI1	5
+#define RK3568_VOP2_EP_LVDS1	6
+
+#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Sascha Hauer]

The VOP2 is the display output controller on the RK3568. Add the node
for it to the dtsi file along with the required display-subsystem node
and the iommu node.

changes since v3:
- Bring back gamma_lut regs
- Drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
 include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
 4 files changed, 73 insertions(+)
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
index 3839eef5e4f7..595fa2562cb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -18,3 +18,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a295f8..1e55efb6fcfd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -95,3 +95,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index a68033a23975..4008bd666d01 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -129,6 +130,11 @@ opp-1800000000 {
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
@@ -451,6 +457,51 @@ gmac1_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "regs", "gamma_lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
new file mode 100644
index 000000000000..0a87bc90564a
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip,vop2.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
+#define __DT_BINDINGS_ROCKCHIP_VOP2_H
+
+#define RK3568_VOP2_EP_RGB	0
+#define RK3568_VOP2_EP_HDMI	1
+#define RK3568_VOP2_EP_EDP	2
+#define RK3568_VOP2_EP_MIPI0	3
+#define RK3568_VOP2_EP_LVDS0	4
+#define RK3568_VOP2_EP_MIPI1	5
+#define RK3568_VOP2_EP_LVDS1	6
+
+#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Sascha Hauer]

The VOP2 is the display output controller on the RK3568. Add the node
for it to the dtsi file along with the required display-subsystem node
and the iommu node.

changes since v3:
- Bring back gamma_lut regs
- Drop redundant _vop suffix from clock names

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
 include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
 4 files changed, 73 insertions(+)
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
index 3839eef5e4f7..595fa2562cb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -18,3 +18,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a295f8..1e55efb6fcfd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -95,3 +95,7 @@ power-domain@RK3568_PD_PIPE {
 		#power-domain-cells = <0>;
 	};
 };
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index a68033a23975..4008bd666d01 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -129,6 +130,11 @@ opp-1800000000 {
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
@@ -451,6 +457,51 @@ gmac1_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "regs", "gamma_lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
new file mode 100644
index 000000000000..0a87bc90564a
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip,vop2.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
+#define __DT_BINDINGS_ROCKCHIP_VOP2_H
+
+#define RK3568_VOP2_EP_RGB	0
+#define RK3568_VOP2_EP_HDMI	1
+#define RK3568_VOP2_EP_EDP	2
+#define RK3568_VOP2_EP_MIPI0	3
+#define RK3568_VOP2_EP_LVDS0	4
+#define RK3568_VOP2_EP_MIPI1	5
+#define RK3568_VOP2_EP_LVDS1	6
+
+#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
-- 
2.30.2

Re: [PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Rob Herring]

On Wed, 26 Jan 2022 15:55:42 +0100, Sascha Hauer wrote:
> The VOP2 is the display output controller on the RK3568. Add the node
> for it to the dtsi file along with the required display-subsystem node
> and the iommu node.
> 
> changes since v3:
> - Bring back gamma_lut regs
> - Drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
>  4 files changed, 73 insertions(+)
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Rob Herring]

On Wed, 26 Jan 2022 15:55:42 +0100, Sascha Hauer wrote:
> The VOP2 is the display output controller on the RK3568. Add the node
> for it to the dtsi file along with the required display-subsystem node
> and the iommu node.
> 
> changes since v3:
> - Bring back gamma_lut regs
> - Drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
>  4 files changed, 73 insertions(+)
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Rob Herring]

On Wed, 26 Jan 2022 15:55:42 +0100, Sascha Hauer wrote:
> The VOP2 is the display output controller on the RK3568. Add the node
> for it to the dtsi file along with the required display-subsystem node
> and the iommu node.
> 
> changes since v3:
> - Bring back gamma_lut regs
> - Drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
>  4 files changed, 73 insertions(+)
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes

[Rob Herring]

On Wed, 26 Jan 2022 15:55:42 +0100, Sascha Hauer wrote:
> The VOP2 is the display output controller on the RK3568. Add the node
> for it to the dtsi file along with the required display-subsystem node
> and the iommu node.
> 
> changes since v3:
> - Bring back gamma_lut regs
> - Drop redundant _vop suffix from clock names
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi |  4 ++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 51 ++++++++++++++++++++++++
>  include/dt-bindings/soc/rockchip,vop2.h  | 14 +++++++
>  4 files changed, 73 insertions(+)
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Sascha Hauer]

Add support for the HDMI port found on RK3568.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4008bd666d01..e38fb223e9b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,7 +10,6 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
 		status = "disabled";
 	};
 
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VOP>;
+		clock-names = "iahb", "isfr", "cec", "ref", "hclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
-- 
2.30.2

[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Sascha Hauer]

Add support for the HDMI port found on RK3568.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4008bd666d01..e38fb223e9b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,7 +10,6 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
 		status = "disabled";
 	};
 
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VOP>;
+		clock-names = "iahb", "isfr", "cec", "ref", "hclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Sascha Hauer]

Add support for the HDMI port found on RK3568.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4008bd666d01..e38fb223e9b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,7 +10,6 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
 		status = "disabled";
 	};
 
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VOP>;
+		clock-names = "iahb", "isfr", "cec", "ref", "hclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Sascha Hauer]

Add support for the HDMI port found on RK3568.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4008bd666d01..e38fb223e9b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -10,7 +10,6 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3568-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
 		status = "disabled";
 	};
 
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VOP>;
+		clock-names = "iahb", "isfr", "cec", "ref", "hclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
 	qos_gpu: qos@fe128000 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe128000 0x0 0x20>;
-- 
2.30.2

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 4008bd666d01..e38fb223e9b8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -10,7 +10,6 @@
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/power/rk3568-power.h>
>  #include <dt-bindings/soc/rockchip,boot-mode.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>                 status = "disabled";
>         };
>
> +       hdmi: hdmi@fe0a0000 {
> +               compatible = "rockchip,rk3568-dw-hdmi";
> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru PCLK_HDMI_HOST>,
> +                        <&cru CLK_HDMI_SFR>,
> +                        <&cru CLK_HDMI_CEC>,
> +                        <&pmucru CLK_HDMI_REF>,
> +                        <&cru HCLK_VOP>;
> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;

I looked into CEC support here, and it seems that it does work with one change.
Please add the two following lines to your patch:
assigned-clocks = <&cru CLK_HDMI_CEC>;
assigned-clock-rates = <32768>;

The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
function.

> +               power-domains = <&power RK3568_PD_VO>;
> +               reg-io-width = <4>;
> +               rockchip,grf = <&grf>;
> +               #sound-dai-cells = <0>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       hdmi_in: port@0 {
> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       hdmi_out: port@1 {
> +                               reg = <1>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +       };
> +
>         qos_gpu: qos@fe128000 {
>                 compatible = "rockchip,rk3568-qos", "syscon";
>                 reg = <0x0 0xfe128000 0x0 0x20>;
> --
> 2.30.2
>

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 4008bd666d01..e38fb223e9b8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -10,7 +10,6 @@
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/power/rk3568-power.h>
>  #include <dt-bindings/soc/rockchip,boot-mode.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>                 status = "disabled";
>         };
>
> +       hdmi: hdmi@fe0a0000 {
> +               compatible = "rockchip,rk3568-dw-hdmi";
> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru PCLK_HDMI_HOST>,
> +                        <&cru CLK_HDMI_SFR>,
> +                        <&cru CLK_HDMI_CEC>,
> +                        <&pmucru CLK_HDMI_REF>,
> +                        <&cru HCLK_VOP>;
> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;

I looked into CEC support here, and it seems that it does work with one change.
Please add the two following lines to your patch:
assigned-clocks = <&cru CLK_HDMI_CEC>;
assigned-clock-rates = <32768>;

The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
function.

> +               power-domains = <&power RK3568_PD_VO>;
> +               reg-io-width = <4>;
> +               rockchip,grf = <&grf>;
> +               #sound-dai-cells = <0>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       hdmi_in: port@0 {
> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       hdmi_out: port@1 {
> +                               reg = <1>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +       };
> +
>         qos_gpu: qos@fe128000 {
>                 compatible = "rockchip,rk3568-qos", "syscon";
>                 reg = <0x0 0xfe128000 0x0 0x20>;
> --
> 2.30.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 4008bd666d01..e38fb223e9b8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -10,7 +10,6 @@
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/power/rk3568-power.h>
>  #include <dt-bindings/soc/rockchip,boot-mode.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>                 status = "disabled";
>         };
>
> +       hdmi: hdmi@fe0a0000 {
> +               compatible = "rockchip,rk3568-dw-hdmi";
> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru PCLK_HDMI_HOST>,
> +                        <&cru CLK_HDMI_SFR>,
> +                        <&cru CLK_HDMI_CEC>,
> +                        <&pmucru CLK_HDMI_REF>,
> +                        <&cru HCLK_VOP>;
> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;

I looked into CEC support here, and it seems that it does work with one change.
Please add the two following lines to your patch:
assigned-clocks = <&cru CLK_HDMI_CEC>;
assigned-clock-rates = <32768>;

The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
function.

> +               power-domains = <&power RK3568_PD_VO>;
> +               reg-io-width = <4>;
> +               rockchip,grf = <&grf>;
> +               #sound-dai-cells = <0>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       hdmi_in: port@0 {
> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       hdmi_out: port@1 {
> +                               reg = <1>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +       };
> +
>         qos_gpu: qos@fe128000 {
>                 compatible = "rockchip,rk3568-qos", "syscon";
>                 reg = <0x0 0xfe128000 0x0 0x20>;
> --
> 2.30.2
>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 4008bd666d01..e38fb223e9b8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -10,7 +10,6 @@
>  #include <dt-bindings/pinctrl/rockchip.h>
>  #include <dt-bindings/power/rk3568-power.h>
>  #include <dt-bindings/soc/rockchip,boot-mode.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>                 status = "disabled";
>         };
>
> +       hdmi: hdmi@fe0a0000 {
> +               compatible = "rockchip,rk3568-dw-hdmi";
> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru PCLK_HDMI_HOST>,
> +                        <&cru CLK_HDMI_SFR>,
> +                        <&cru CLK_HDMI_CEC>,
> +                        <&pmucru CLK_HDMI_REF>,
> +                        <&cru HCLK_VOP>;
> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;

I looked into CEC support here, and it seems that it does work with one change.
Please add the two following lines to your patch:
assigned-clocks = <&cru CLK_HDMI_CEC>;
assigned-clock-rates = <32768>;

The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
function.

> +               power-domains = <&power RK3568_PD_VO>;
> +               reg-io-width = <4>;
> +               rockchip,grf = <&grf>;
> +               #sound-dai-cells = <0>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       hdmi_in: port@0 {
> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       hdmi_out: port@1 {
> +                               reg = <1>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +       };
> +
>         qos_gpu: qos@fe128000 {
>                 compatible = "rockchip,rk3568-qos", "syscon";
>                 reg = <0x0 0xfe128000 0x0 0x20>;
> --
> 2.30.2
>

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 16:04, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>
>> Add support for the HDMI port found on RK3568.
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>   1 file changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 4008bd666d01..e38fb223e9b8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -10,7 +10,6 @@
>>   #include <dt-bindings/pinctrl/rockchip.h>
>>   #include <dt-bindings/power/rk3568-power.h>
>>   #include <dt-bindings/soc/rockchip,boot-mode.h>
>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>                  status = "disabled";
>>          };
>>
>> +       hdmi: hdmi@fe0a0000 {
>> +               compatible = "rockchip,rk3568-dw-hdmi";
>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&cru PCLK_HDMI_HOST>,
>> +                        <&cru CLK_HDMI_SFR>,
>> +                        <&cru CLK_HDMI_CEC>,
>> +                        <&pmucru CLK_HDMI_REF>,
>> +                        <&cru HCLK_VOP>;
>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> 
> I looked into CEC support here, and it seems that it does work with one change.
> Please add the two following lines to your patch:
> assigned-clocks = <&cru CLK_HDMI_CEC>;
> assigned-clock-rates = <32768>;
> 
> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> function.

Wouldn't it make far more sense to just stick a suitable clk_set_rate() 
call in the driver? AFAICS it's already explicitly aware of the CEC clock.

Robin.

>> +               power-domains = <&power RK3568_PD_VO>;
>> +               reg-io-width = <4>;
>> +               rockchip,grf = <&grf>;
>> +               #sound-dai-cells = <0>;
>> +               status = "disabled";
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       hdmi_in: port@0 {
>> +                               reg = <0>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +
>> +                       hdmi_out: port@1 {
>> +                               reg = <1>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +               };
>> +       };
>> +
>>          qos_gpu: qos@fe128000 {
>>                  compatible = "rockchip,rk3568-qos", "syscon";
>>                  reg = <0x0 0xfe128000 0x0 0x20>;
>> --
>> 2.30.2
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 16:04, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>
>> Add support for the HDMI port found on RK3568.
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>   1 file changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 4008bd666d01..e38fb223e9b8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -10,7 +10,6 @@
>>   #include <dt-bindings/pinctrl/rockchip.h>
>>   #include <dt-bindings/power/rk3568-power.h>
>>   #include <dt-bindings/soc/rockchip,boot-mode.h>
>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>                  status = "disabled";
>>          };
>>
>> +       hdmi: hdmi@fe0a0000 {
>> +               compatible = "rockchip,rk3568-dw-hdmi";
>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&cru PCLK_HDMI_HOST>,
>> +                        <&cru CLK_HDMI_SFR>,
>> +                        <&cru CLK_HDMI_CEC>,
>> +                        <&pmucru CLK_HDMI_REF>,
>> +                        <&cru HCLK_VOP>;
>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> 
> I looked into CEC support here, and it seems that it does work with one change.
> Please add the two following lines to your patch:
> assigned-clocks = <&cru CLK_HDMI_CEC>;
> assigned-clock-rates = <32768>;
> 
> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> function.

Wouldn't it make far more sense to just stick a suitable clk_set_rate() 
call in the driver? AFAICS it's already explicitly aware of the CEC clock.

Robin.

>> +               power-domains = <&power RK3568_PD_VO>;
>> +               reg-io-width = <4>;
>> +               rockchip,grf = <&grf>;
>> +               #sound-dai-cells = <0>;
>> +               status = "disabled";
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       hdmi_in: port@0 {
>> +                               reg = <0>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +
>> +                       hdmi_out: port@1 {
>> +                               reg = <1>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +               };
>> +       };
>> +
>>          qos_gpu: qos@fe128000 {
>>                  compatible = "rockchip,rk3568-qos", "syscon";
>>                  reg = <0x0 0xfe128000 0x0 0x20>;
>> --
>> 2.30.2
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 16:04, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>
>> Add support for the HDMI port found on RK3568.
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>   1 file changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 4008bd666d01..e38fb223e9b8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -10,7 +10,6 @@
>>   #include <dt-bindings/pinctrl/rockchip.h>
>>   #include <dt-bindings/power/rk3568-power.h>
>>   #include <dt-bindings/soc/rockchip,boot-mode.h>
>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>                  status = "disabled";
>>          };
>>
>> +       hdmi: hdmi@fe0a0000 {
>> +               compatible = "rockchip,rk3568-dw-hdmi";
>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&cru PCLK_HDMI_HOST>,
>> +                        <&cru CLK_HDMI_SFR>,
>> +                        <&cru CLK_HDMI_CEC>,
>> +                        <&pmucru CLK_HDMI_REF>,
>> +                        <&cru HCLK_VOP>;
>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> 
> I looked into CEC support here, and it seems that it does work with one change.
> Please add the two following lines to your patch:
> assigned-clocks = <&cru CLK_HDMI_CEC>;
> assigned-clock-rates = <32768>;
> 
> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> function.

Wouldn't it make far more sense to just stick a suitable clk_set_rate() 
call in the driver? AFAICS it's already explicitly aware of the CEC clock.

Robin.

>> +               power-domains = <&power RK3568_PD_VO>;
>> +               reg-io-width = <4>;
>> +               rockchip,grf = <&grf>;
>> +               #sound-dai-cells = <0>;
>> +               status = "disabled";
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       hdmi_in: port@0 {
>> +                               reg = <0>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +
>> +                       hdmi_out: port@1 {
>> +                               reg = <1>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +               };
>> +       };
>> +
>>          qos_gpu: qos@fe128000 {
>>                  compatible = "rockchip,rk3568-qos", "syscon";
>>                  reg = <0x0 0xfe128000 0x0 0x20>;
>> --
>> 2.30.2
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 16:04, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>
>> Add support for the HDMI port found on RK3568.
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>   1 file changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 4008bd666d01..e38fb223e9b8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -10,7 +10,6 @@
>>   #include <dt-bindings/pinctrl/rockchip.h>
>>   #include <dt-bindings/power/rk3568-power.h>
>>   #include <dt-bindings/soc/rockchip,boot-mode.h>
>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>                  status = "disabled";
>>          };
>>
>> +       hdmi: hdmi@fe0a0000 {
>> +               compatible = "rockchip,rk3568-dw-hdmi";
>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&cru PCLK_HDMI_HOST>,
>> +                        <&cru CLK_HDMI_SFR>,
>> +                        <&cru CLK_HDMI_CEC>,
>> +                        <&pmucru CLK_HDMI_REF>,
>> +                        <&cru HCLK_VOP>;
>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> 
> I looked into CEC support here, and it seems that it does work with one change.
> Please add the two following lines to your patch:
> assigned-clocks = <&cru CLK_HDMI_CEC>;
> assigned-clock-rates = <32768>;
> 
> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> function.

Wouldn't it make far more sense to just stick a suitable clk_set_rate() 
call in the driver? AFAICS it's already explicitly aware of the CEC clock.

Robin.

>> +               power-domains = <&power RK3568_PD_VO>;
>> +               reg-io-width = <4>;
>> +               rockchip,grf = <&grf>;
>> +               #sound-dai-cells = <0>;
>> +               status = "disabled";
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       hdmi_in: port@0 {
>> +                               reg = <0>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +
>> +                       hdmi_out: port@1 {
>> +                               reg = <1>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +               };
>> +       };
>> +
>>          qos_gpu: qos@fe128000 {
>>                  compatible = "rockchip,rk3568-qos", "syscon";
>>                  reg = <0x0 0xfe128000 0x0 0x20>;
>> --
>> 2.30.2
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 16:04, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>
> >> Add support for the HDMI port found on RK3568.
> >>
> >> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >> ---
> >>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>   1 file changed, 36 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> index 4008bd666d01..e38fb223e9b8 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> @@ -10,7 +10,6 @@
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >>   #include <dt-bindings/power/rk3568-power.h>
> >>   #include <dt-bindings/soc/rockchip,boot-mode.h>
> >> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>   #include <dt-bindings/thermal/thermal.h>
> >>
> >>   / {
> >> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>                  status = "disabled";
> >>          };
> >>
> >> +       hdmi: hdmi@fe0a0000 {
> >> +               compatible = "rockchip,rk3568-dw-hdmi";
> >> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >> +               clocks = <&cru PCLK_HDMI_HOST>,
> >> +                        <&cru CLK_HDMI_SFR>,
> >> +                        <&cru CLK_HDMI_CEC>,
> >> +                        <&pmucru CLK_HDMI_REF>,
> >> +                        <&cru HCLK_VOP>;
> >> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >> +               pinctrl-names = "default";
> >> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >
> > I looked into CEC support here, and it seems that it does work with one change.
> > Please add the two following lines to your patch:
> > assigned-clocks = <&cru CLK_HDMI_CEC>;
> > assigned-clock-rates = <32768>;
> >
> > The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> > feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> > function.
>
> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> call in the driver? AFAICS it's already explicitly aware of the CEC clock.

This is handled purely in the
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
touch it there as it would affect all users, not just Rockchip.

Could someone familiar with the dw-hdmi IP weigh in on the minimum and
maximum clock rate the CEC block can handle?

>
> Robin.
>
> >> +               power-domains = <&power RK3568_PD_VO>;
> >> +               reg-io-width = <4>;
> >> +               rockchip,grf = <&grf>;
> >> +               #sound-dai-cells = <0>;
> >> +               status = "disabled";
> >> +
> >> +               ports {
> >> +                       #address-cells = <1>;
> >> +                       #size-cells = <0>;
> >> +
> >> +                       hdmi_in: port@0 {
> >> +                               reg = <0>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +
> >> +                       hdmi_out: port@1 {
> >> +                               reg = <1>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +               };
> >> +       };
> >> +
> >>          qos_gpu: qos@fe128000 {
> >>                  compatible = "rockchip,rk3568-qos", "syscon";
> >>                  reg = <0x0 0xfe128000 0x0 0x20>;
> >> --
> >> 2.30.2
> >>
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 16:04, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>
> >> Add support for the HDMI port found on RK3568.
> >>
> >> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >> ---
> >>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>   1 file changed, 36 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> index 4008bd666d01..e38fb223e9b8 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> @@ -10,7 +10,6 @@
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >>   #include <dt-bindings/power/rk3568-power.h>
> >>   #include <dt-bindings/soc/rockchip,boot-mode.h>
> >> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>   #include <dt-bindings/thermal/thermal.h>
> >>
> >>   / {
> >> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>                  status = "disabled";
> >>          };
> >>
> >> +       hdmi: hdmi@fe0a0000 {
> >> +               compatible = "rockchip,rk3568-dw-hdmi";
> >> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >> +               clocks = <&cru PCLK_HDMI_HOST>,
> >> +                        <&cru CLK_HDMI_SFR>,
> >> +                        <&cru CLK_HDMI_CEC>,
> >> +                        <&pmucru CLK_HDMI_REF>,
> >> +                        <&cru HCLK_VOP>;
> >> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >> +               pinctrl-names = "default";
> >> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >
> > I looked into CEC support here, and it seems that it does work with one change.
> > Please add the two following lines to your patch:
> > assigned-clocks = <&cru CLK_HDMI_CEC>;
> > assigned-clock-rates = <32768>;
> >
> > The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> > feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> > function.
>
> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> call in the driver? AFAICS it's already explicitly aware of the CEC clock.

This is handled purely in the
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
touch it there as it would affect all users, not just Rockchip.

Could someone familiar with the dw-hdmi IP weigh in on the minimum and
maximum clock rate the CEC block can handle?

>
> Robin.
>
> >> +               power-domains = <&power RK3568_PD_VO>;
> >> +               reg-io-width = <4>;
> >> +               rockchip,grf = <&grf>;
> >> +               #sound-dai-cells = <0>;
> >> +               status = "disabled";
> >> +
> >> +               ports {
> >> +                       #address-cells = <1>;
> >> +                       #size-cells = <0>;
> >> +
> >> +                       hdmi_in: port@0 {
> >> +                               reg = <0>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +
> >> +                       hdmi_out: port@1 {
> >> +                               reg = <1>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +               };
> >> +       };
> >> +
> >>          qos_gpu: qos@fe128000 {
> >>                  compatible = "rockchip,rk3568-qos", "syscon";
> >>                  reg = <0x0 0xfe128000 0x0 0x20>;
> >> --
> >> 2.30.2
> >>
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 16:04, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>
> >> Add support for the HDMI port found on RK3568.
> >>
> >> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >> ---
> >>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>   1 file changed, 36 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> index 4008bd666d01..e38fb223e9b8 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> @@ -10,7 +10,6 @@
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >>   #include <dt-bindings/power/rk3568-power.h>
> >>   #include <dt-bindings/soc/rockchip,boot-mode.h>
> >> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>   #include <dt-bindings/thermal/thermal.h>
> >>
> >>   / {
> >> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>                  status = "disabled";
> >>          };
> >>
> >> +       hdmi: hdmi@fe0a0000 {
> >> +               compatible = "rockchip,rk3568-dw-hdmi";
> >> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >> +               clocks = <&cru PCLK_HDMI_HOST>,
> >> +                        <&cru CLK_HDMI_SFR>,
> >> +                        <&cru CLK_HDMI_CEC>,
> >> +                        <&pmucru CLK_HDMI_REF>,
> >> +                        <&cru HCLK_VOP>;
> >> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >> +               pinctrl-names = "default";
> >> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >
> > I looked into CEC support here, and it seems that it does work with one change.
> > Please add the two following lines to your patch:
> > assigned-clocks = <&cru CLK_HDMI_CEC>;
> > assigned-clock-rates = <32768>;
> >
> > The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> > feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> > function.
>
> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> call in the driver? AFAICS it's already explicitly aware of the CEC clock.

This is handled purely in the
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
touch it there as it would affect all users, not just Rockchip.

Could someone familiar with the dw-hdmi IP weigh in on the minimum and
maximum clock rate the CEC block can handle?

>
> Robin.
>
> >> +               power-domains = <&power RK3568_PD_VO>;
> >> +               reg-io-width = <4>;
> >> +               rockchip,grf = <&grf>;
> >> +               #sound-dai-cells = <0>;
> >> +               status = "disabled";
> >> +
> >> +               ports {
> >> +                       #address-cells = <1>;
> >> +                       #size-cells = <0>;
> >> +
> >> +                       hdmi_in: port@0 {
> >> +                               reg = <0>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +
> >> +                       hdmi_out: port@1 {
> >> +                               reg = <1>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +               };
> >> +       };
> >> +
> >>          qos_gpu: qos@fe128000 {
> >>                  compatible = "rockchip,rk3568-qos", "syscon";
> >>                  reg = <0x0 0xfe128000 0x0 0x20>;
> >> --
> >> 2.30.2
> >>
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 16:04, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>
> >> Add support for the HDMI port found on RK3568.
> >>
> >> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >> ---
> >>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>   1 file changed, 36 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> index 4008bd666d01..e38fb223e9b8 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >> @@ -10,7 +10,6 @@
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >>   #include <dt-bindings/power/rk3568-power.h>
> >>   #include <dt-bindings/soc/rockchip,boot-mode.h>
> >> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>   #include <dt-bindings/thermal/thermal.h>
> >>
> >>   / {
> >> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>                  status = "disabled";
> >>          };
> >>
> >> +       hdmi: hdmi@fe0a0000 {
> >> +               compatible = "rockchip,rk3568-dw-hdmi";
> >> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >> +               clocks = <&cru PCLK_HDMI_HOST>,
> >> +                        <&cru CLK_HDMI_SFR>,
> >> +                        <&cru CLK_HDMI_CEC>,
> >> +                        <&pmucru CLK_HDMI_REF>,
> >> +                        <&cru HCLK_VOP>;
> >> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >> +               pinctrl-names = "default";
> >> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >
> > I looked into CEC support here, and it seems that it does work with one change.
> > Please add the two following lines to your patch:
> > assigned-clocks = <&cru CLK_HDMI_CEC>;
> > assigned-clock-rates = <32768>;
> >
> > The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> > feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> > function.
>
> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> call in the driver? AFAICS it's already explicitly aware of the CEC clock.

This is handled purely in the
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
touch it there as it would affect all users, not just Rockchip.

Could someone familiar with the dw-hdmi IP weigh in on the minimum and
maximum clock rate the CEC block can handle?

>
> Robin.
>
> >> +               power-domains = <&power RK3568_PD_VO>;
> >> +               reg-io-width = <4>;
> >> +               rockchip,grf = <&grf>;
> >> +               #sound-dai-cells = <0>;
> >> +               status = "disabled";
> >> +
> >> +               ports {
> >> +                       #address-cells = <1>;
> >> +                       #size-cells = <0>;
> >> +
> >> +                       hdmi_in: port@0 {
> >> +                               reg = <0>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +
> >> +                       hdmi_out: port@1 {
> >> +                               reg = <1>;
> >> +                               #address-cells = <1>;
> >> +                               #size-cells = <0>;
> >> +                       };
> >> +               };
> >> +       };
> >> +
> >>          qos_gpu: qos@fe128000 {
> >>                  compatible = "rockchip,rk3568-qos", "syscon";
> >>                  reg = <0x0 0xfe128000 0x0 0x20>;
> >> --
> >> 2.30.2
> >>
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 18:44, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2022-01-26 16:04, Peter Geis wrote:
>>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>>>
>>>> Add support for the HDMI port found on RK3568.
>>>>
>>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>>> ---
>>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>>>    1 file changed, 36 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> index 4008bd666d01..e38fb223e9b8 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> @@ -10,7 +10,6 @@
>>>>    #include <dt-bindings/pinctrl/rockchip.h>
>>>>    #include <dt-bindings/power/rk3568-power.h>
>>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
>>>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>>>    #include <dt-bindings/thermal/thermal.h>
>>>>
>>>>    / {
>>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>>>                   status = "disabled";
>>>>           };
>>>>
>>>> +       hdmi: hdmi@fe0a0000 {
>>>> +               compatible = "rockchip,rk3568-dw-hdmi";
>>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>>>> +               clocks = <&cru PCLK_HDMI_HOST>,
>>>> +                        <&cru CLK_HDMI_SFR>,
>>>> +                        <&cru CLK_HDMI_CEC>,
>>>> +                        <&pmucru CLK_HDMI_REF>,
>>>> +                        <&cru HCLK_VOP>;
>>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>>>> +               pinctrl-names = "default";
>>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
>>>
>>> I looked into CEC support here, and it seems that it does work with one change.
>>> Please add the two following lines to your patch:
>>> assigned-clocks = <&cru CLK_HDMI_CEC>;
>>> assigned-clock-rates = <32768>;
>>>
>>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
>>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
>>> function.
>>
>> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
>> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> 
> This is handled purely in the
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> touch it there as it would affect all users, not just Rockchip.

I'd have a strong hunch that it's a standard thing for the DesignWare IP 
and not affected by platform integration. I don't have the magical 
Synopsys databook, but between the trusty old i.MX6 manual and most of 
the other in-tree DTs getting their dw-hdmi "cec" clock from 
suspiciously-obviously-named sources, I'd be somewhat surprised if it 
was ever anything other than 32KHz.

Robin.

> Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> maximum clock rate the CEC block can handle?
> 
>>
>> Robin.
>>
>>>> +               power-domains = <&power RK3568_PD_VO>;
>>>> +               reg-io-width = <4>;
>>>> +               rockchip,grf = <&grf>;
>>>> +               #sound-dai-cells = <0>;
>>>> +               status = "disabled";
>>>> +
>>>> +               ports {
>>>> +                       #address-cells = <1>;
>>>> +                       #size-cells = <0>;
>>>> +
>>>> +                       hdmi_in: port@0 {
>>>> +                               reg = <0>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +
>>>> +                       hdmi_out: port@1 {
>>>> +                               reg = <1>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +               };
>>>> +       };
>>>> +
>>>>           qos_gpu: qos@fe128000 {
>>>>                   compatible = "rockchip,rk3568-qos", "syscon";
>>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
>>>> --
>>>> 2.30.2
>>>>
>>>
>>> _______________________________________________
>>> Linux-rockchip mailing list
>>> Linux-rockchip@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 18:44, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2022-01-26 16:04, Peter Geis wrote:
>>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>>>
>>>> Add support for the HDMI port found on RK3568.
>>>>
>>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>>> ---
>>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>>>    1 file changed, 36 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> index 4008bd666d01..e38fb223e9b8 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> @@ -10,7 +10,6 @@
>>>>    #include <dt-bindings/pinctrl/rockchip.h>
>>>>    #include <dt-bindings/power/rk3568-power.h>
>>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
>>>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>>>    #include <dt-bindings/thermal/thermal.h>
>>>>
>>>>    / {
>>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>>>                   status = "disabled";
>>>>           };
>>>>
>>>> +       hdmi: hdmi@fe0a0000 {
>>>> +               compatible = "rockchip,rk3568-dw-hdmi";
>>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>>>> +               clocks = <&cru PCLK_HDMI_HOST>,
>>>> +                        <&cru CLK_HDMI_SFR>,
>>>> +                        <&cru CLK_HDMI_CEC>,
>>>> +                        <&pmucru CLK_HDMI_REF>,
>>>> +                        <&cru HCLK_VOP>;
>>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>>>> +               pinctrl-names = "default";
>>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
>>>
>>> I looked into CEC support here, and it seems that it does work with one change.
>>> Please add the two following lines to your patch:
>>> assigned-clocks = <&cru CLK_HDMI_CEC>;
>>> assigned-clock-rates = <32768>;
>>>
>>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
>>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
>>> function.
>>
>> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
>> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> 
> This is handled purely in the
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> touch it there as it would affect all users, not just Rockchip.

I'd have a strong hunch that it's a standard thing for the DesignWare IP 
and not affected by platform integration. I don't have the magical 
Synopsys databook, but between the trusty old i.MX6 manual and most of 
the other in-tree DTs getting their dw-hdmi "cec" clock from 
suspiciously-obviously-named sources, I'd be somewhat surprised if it 
was ever anything other than 32KHz.

Robin.

> Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> maximum clock rate the CEC block can handle?
> 
>>
>> Robin.
>>
>>>> +               power-domains = <&power RK3568_PD_VO>;
>>>> +               reg-io-width = <4>;
>>>> +               rockchip,grf = <&grf>;
>>>> +               #sound-dai-cells = <0>;
>>>> +               status = "disabled";
>>>> +
>>>> +               ports {
>>>> +                       #address-cells = <1>;
>>>> +                       #size-cells = <0>;
>>>> +
>>>> +                       hdmi_in: port@0 {
>>>> +                               reg = <0>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +
>>>> +                       hdmi_out: port@1 {
>>>> +                               reg = <1>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +               };
>>>> +       };
>>>> +
>>>>           qos_gpu: qos@fe128000 {
>>>>                   compatible = "rockchip,rk3568-qos", "syscon";
>>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
>>>> --
>>>> 2.30.2
>>>>
>>>
>>> _______________________________________________
>>> Linux-rockchip mailing list
>>> Linux-rockchip@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 18:44, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2022-01-26 16:04, Peter Geis wrote:
>>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>>>
>>>> Add support for the HDMI port found on RK3568.
>>>>
>>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>>> ---
>>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>>>    1 file changed, 36 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> index 4008bd666d01..e38fb223e9b8 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> @@ -10,7 +10,6 @@
>>>>    #include <dt-bindings/pinctrl/rockchip.h>
>>>>    #include <dt-bindings/power/rk3568-power.h>
>>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
>>>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>>>    #include <dt-bindings/thermal/thermal.h>
>>>>
>>>>    / {
>>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>>>                   status = "disabled";
>>>>           };
>>>>
>>>> +       hdmi: hdmi@fe0a0000 {
>>>> +               compatible = "rockchip,rk3568-dw-hdmi";
>>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>>>> +               clocks = <&cru PCLK_HDMI_HOST>,
>>>> +                        <&cru CLK_HDMI_SFR>,
>>>> +                        <&cru CLK_HDMI_CEC>,
>>>> +                        <&pmucru CLK_HDMI_REF>,
>>>> +                        <&cru HCLK_VOP>;
>>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>>>> +               pinctrl-names = "default";
>>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
>>>
>>> I looked into CEC support here, and it seems that it does work with one change.
>>> Please add the two following lines to your patch:
>>> assigned-clocks = <&cru CLK_HDMI_CEC>;
>>> assigned-clock-rates = <32768>;
>>>
>>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
>>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
>>> function.
>>
>> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
>> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> 
> This is handled purely in the
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> touch it there as it would affect all users, not just Rockchip.

I'd have a strong hunch that it's a standard thing for the DesignWare IP 
and not affected by platform integration. I don't have the magical 
Synopsys databook, but between the trusty old i.MX6 manual and most of 
the other in-tree DTs getting their dw-hdmi "cec" clock from 
suspiciously-obviously-named sources, I'd be somewhat surprised if it 
was ever anything other than 32KHz.

Robin.

> Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> maximum clock rate the CEC block can handle?
> 
>>
>> Robin.
>>
>>>> +               power-domains = <&power RK3568_PD_VO>;
>>>> +               reg-io-width = <4>;
>>>> +               rockchip,grf = <&grf>;
>>>> +               #sound-dai-cells = <0>;
>>>> +               status = "disabled";
>>>> +
>>>> +               ports {
>>>> +                       #address-cells = <1>;
>>>> +                       #size-cells = <0>;
>>>> +
>>>> +                       hdmi_in: port@0 {
>>>> +                               reg = <0>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +
>>>> +                       hdmi_out: port@1 {
>>>> +                               reg = <1>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +               };
>>>> +       };
>>>> +
>>>>           qos_gpu: qos@fe128000 {
>>>>                   compatible = "rockchip,rk3568-qos", "syscon";
>>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
>>>> --
>>>> 2.30.2
>>>>
>>>
>>> _______________________________________________
>>> Linux-rockchip mailing list
>>> Linux-rockchip@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 18:44, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 2022-01-26 16:04, Peter Geis wrote:
>>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>>>
>>>> Add support for the HDMI port found on RK3568.
>>>>
>>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>>> ---
>>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>>>    1 file changed, 36 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> index 4008bd666d01..e38fb223e9b8 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>>>> @@ -10,7 +10,6 @@
>>>>    #include <dt-bindings/pinctrl/rockchip.h>
>>>>    #include <dt-bindings/power/rk3568-power.h>
>>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
>>>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>>>    #include <dt-bindings/thermal/thermal.h>
>>>>
>>>>    / {
>>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
>>>>                   status = "disabled";
>>>>           };
>>>>
>>>> +       hdmi: hdmi@fe0a0000 {
>>>> +               compatible = "rockchip,rk3568-dw-hdmi";
>>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>>>> +               clocks = <&cru PCLK_HDMI_HOST>,
>>>> +                        <&cru CLK_HDMI_SFR>,
>>>> +                        <&cru CLK_HDMI_CEC>,
>>>> +                        <&pmucru CLK_HDMI_REF>,
>>>> +                        <&cru HCLK_VOP>;
>>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>>>> +               pinctrl-names = "default";
>>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
>>>
>>> I looked into CEC support here, and it seems that it does work with one change.
>>> Please add the two following lines to your patch:
>>> assigned-clocks = <&cru CLK_HDMI_CEC>;
>>> assigned-clock-rates = <32768>;
>>>
>>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
>>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
>>> function.
>>
>> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
>> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> 
> This is handled purely in the
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> touch it there as it would affect all users, not just Rockchip.

I'd have a strong hunch that it's a standard thing for the DesignWare IP 
and not affected by platform integration. I don't have the magical 
Synopsys databook, but between the trusty old i.MX6 manual and most of 
the other in-tree DTs getting their dw-hdmi "cec" clock from 
suspiciously-obviously-named sources, I'd be somewhat surprised if it 
was ever anything other than 32KHz.

Robin.

> Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> maximum clock rate the CEC block can handle?
> 
>>
>> Robin.
>>
>>>> +               power-domains = <&power RK3568_PD_VO>;
>>>> +               reg-io-width = <4>;
>>>> +               rockchip,grf = <&grf>;
>>>> +               #sound-dai-cells = <0>;
>>>> +               status = "disabled";
>>>> +
>>>> +               ports {
>>>> +                       #address-cells = <1>;
>>>> +                       #size-cells = <0>;
>>>> +
>>>> +                       hdmi_in: port@0 {
>>>> +                               reg = <0>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +
>>>> +                       hdmi_out: port@1 {
>>>> +                               reg = <1>;
>>>> +                               #address-cells = <1>;
>>>> +                               #size-cells = <0>;
>>>> +                       };
>>>> +               };
>>>> +       };
>>>> +
>>>>           qos_gpu: qos@fe128000 {
>>>>                   compatible = "rockchip,rk3568-qos", "syscon";
>>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
>>>> --
>>>> 2.30.2
>>>>
>>>
>>> _______________________________________________
>>> Linux-rockchip mailing list
>>> Linux-rockchip@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 2:25 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 18:44, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>
> >> On 2022-01-26 16:04, Peter Geis wrote:
> >>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>>>
> >>>> Add support for the HDMI port found on RK3568.
> >>>>
> >>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >>>> ---
> >>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>>>    1 file changed, 36 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> index 4008bd666d01..e38fb223e9b8 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> @@ -10,7 +10,6 @@
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>>    #include <dt-bindings/power/rk3568-power.h>
> >>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
> >>>> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>>>    #include <dt-bindings/thermal/thermal.h>
> >>>>
> >>>>    / {
> >>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>>>                   status = "disabled";
> >>>>           };
> >>>>
> >>>> +       hdmi: hdmi@fe0a0000 {
> >>>> +               compatible = "rockchip,rk3568-dw-hdmi";
> >>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +               clocks = <&cru PCLK_HDMI_HOST>,
> >>>> +                        <&cru CLK_HDMI_SFR>,
> >>>> +                        <&cru CLK_HDMI_CEC>,
> >>>> +                        <&pmucru CLK_HDMI_REF>,
> >>>> +                        <&cru HCLK_VOP>;
> >>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >>>> +               pinctrl-names = "default";
> >>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >>>
> >>> I looked into CEC support here, and it seems that it does work with one change.
> >>> Please add the two following lines to your patch:
> >>> assigned-clocks = <&cru CLK_HDMI_CEC>;
> >>> assigned-clock-rates = <32768>;
> >>>
> >>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> >>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> >>> function.
> >>
> >> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> >> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> >
> > This is handled purely in the
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> > touch it there as it would affect all users, not just Rockchip.
>
> I'd have a strong hunch that it's a standard thing for the DesignWare IP
> and not affected by platform integration. I don't have the magical
> Synopsys databook, but between the trusty old i.MX6 manual and most of
> the other in-tree DTs getting their dw-hdmi "cec" clock from
> suspiciously-obviously-named sources, I'd be somewhat surprised if it
> was ever anything other than 32KHz.

My main concern was similar to the other HDMI clock issues, mainly
setting the clock can propagate up and affect other users of the
upstream clock.
I'll spin up a quick patch for this method.

Thanks,
Peter

>
> Robin.
>
> > Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> > maximum clock rate the CEC block can handle?
> >
> >>
> >> Robin.
> >>
> >>>> +               power-domains = <&power RK3568_PD_VO>;
> >>>> +               reg-io-width = <4>;
> >>>> +               rockchip,grf = <&grf>;
> >>>> +               #sound-dai-cells = <0>;
> >>>> +               status = "disabled";
> >>>> +
> >>>> +               ports {
> >>>> +                       #address-cells = <1>;
> >>>> +                       #size-cells = <0>;
> >>>> +
> >>>> +                       hdmi_in: port@0 {
> >>>> +                               reg = <0>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +
> >>>> +                       hdmi_out: port@1 {
> >>>> +                               reg = <1>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +               };
> >>>> +       };
> >>>> +
> >>>>           qos_gpu: qos@fe128000 {
> >>>>                   compatible = "rockchip,rk3568-qos", "syscon";
> >>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
> >>>> --
> >>>> 2.30.2
> >>>>
> >>>
> >>> _______________________________________________
> >>> Linux-rockchip mailing list
> >>> Linux-rockchip@lists.infradead.org
> >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 2:25 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 18:44, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>
> >> On 2022-01-26 16:04, Peter Geis wrote:
> >>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>>>
> >>>> Add support for the HDMI port found on RK3568.
> >>>>
> >>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >>>> ---
> >>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>>>    1 file changed, 36 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> index 4008bd666d01..e38fb223e9b8 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> @@ -10,7 +10,6 @@
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>>    #include <dt-bindings/power/rk3568-power.h>
> >>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
> >>>> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>>>    #include <dt-bindings/thermal/thermal.h>
> >>>>
> >>>>    / {
> >>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>>>                   status = "disabled";
> >>>>           };
> >>>>
> >>>> +       hdmi: hdmi@fe0a0000 {
> >>>> +               compatible = "rockchip,rk3568-dw-hdmi";
> >>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +               clocks = <&cru PCLK_HDMI_HOST>,
> >>>> +                        <&cru CLK_HDMI_SFR>,
> >>>> +                        <&cru CLK_HDMI_CEC>,
> >>>> +                        <&pmucru CLK_HDMI_REF>,
> >>>> +                        <&cru HCLK_VOP>;
> >>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >>>> +               pinctrl-names = "default";
> >>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >>>
> >>> I looked into CEC support here, and it seems that it does work with one change.
> >>> Please add the two following lines to your patch:
> >>> assigned-clocks = <&cru CLK_HDMI_CEC>;
> >>> assigned-clock-rates = <32768>;
> >>>
> >>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> >>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> >>> function.
> >>
> >> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> >> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> >
> > This is handled purely in the
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> > touch it there as it would affect all users, not just Rockchip.
>
> I'd have a strong hunch that it's a standard thing for the DesignWare IP
> and not affected by platform integration. I don't have the magical
> Synopsys databook, but between the trusty old i.MX6 manual and most of
> the other in-tree DTs getting their dw-hdmi "cec" clock from
> suspiciously-obviously-named sources, I'd be somewhat surprised if it
> was ever anything other than 32KHz.

My main concern was similar to the other HDMI clock issues, mainly
setting the clock can propagate up and affect other users of the
upstream clock.
I'll spin up a quick patch for this method.

Thanks,
Peter

>
> Robin.
>
> > Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> > maximum clock rate the CEC block can handle?
> >
> >>
> >> Robin.
> >>
> >>>> +               power-domains = <&power RK3568_PD_VO>;
> >>>> +               reg-io-width = <4>;
> >>>> +               rockchip,grf = <&grf>;
> >>>> +               #sound-dai-cells = <0>;
> >>>> +               status = "disabled";
> >>>> +
> >>>> +               ports {
> >>>> +                       #address-cells = <1>;
> >>>> +                       #size-cells = <0>;
> >>>> +
> >>>> +                       hdmi_in: port@0 {
> >>>> +                               reg = <0>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +
> >>>> +                       hdmi_out: port@1 {
> >>>> +                               reg = <1>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +               };
> >>>> +       };
> >>>> +
> >>>>           qos_gpu: qos@fe128000 {
> >>>>                   compatible = "rockchip,rk3568-qos", "syscon";
> >>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
> >>>> --
> >>>> 2.30.2
> >>>>
> >>>
> >>> _______________________________________________
> >>> Linux-rockchip mailing list
> >>> Linux-rockchip@lists.infradead.org
> >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 2:25 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 18:44, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>
> >> On 2022-01-26 16:04, Peter Geis wrote:
> >>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>>>
> >>>> Add support for the HDMI port found on RK3568.
> >>>>
> >>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >>>> ---
> >>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>>>    1 file changed, 36 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> index 4008bd666d01..e38fb223e9b8 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> @@ -10,7 +10,6 @@
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>>    #include <dt-bindings/power/rk3568-power.h>
> >>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
> >>>> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>>>    #include <dt-bindings/thermal/thermal.h>
> >>>>
> >>>>    / {
> >>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>>>                   status = "disabled";
> >>>>           };
> >>>>
> >>>> +       hdmi: hdmi@fe0a0000 {
> >>>> +               compatible = "rockchip,rk3568-dw-hdmi";
> >>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +               clocks = <&cru PCLK_HDMI_HOST>,
> >>>> +                        <&cru CLK_HDMI_SFR>,
> >>>> +                        <&cru CLK_HDMI_CEC>,
> >>>> +                        <&pmucru CLK_HDMI_REF>,
> >>>> +                        <&cru HCLK_VOP>;
> >>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >>>> +               pinctrl-names = "default";
> >>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >>>
> >>> I looked into CEC support here, and it seems that it does work with one change.
> >>> Please add the two following lines to your patch:
> >>> assigned-clocks = <&cru CLK_HDMI_CEC>;
> >>> assigned-clock-rates = <32768>;
> >>>
> >>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> >>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> >>> function.
> >>
> >> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> >> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> >
> > This is handled purely in the
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> > touch it there as it would affect all users, not just Rockchip.
>
> I'd have a strong hunch that it's a standard thing for the DesignWare IP
> and not affected by platform integration. I don't have the magical
> Synopsys databook, but between the trusty old i.MX6 manual and most of
> the other in-tree DTs getting their dw-hdmi "cec" clock from
> suspiciously-obviously-named sources, I'd be somewhat surprised if it
> was ever anything other than 32KHz.

My main concern was similar to the other HDMI clock issues, mainly
setting the clock can propagate up and affect other users of the
upstream clock.
I'll spin up a quick patch for this method.

Thanks,
Peter

>
> Robin.
>
> > Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> > maximum clock rate the CEC block can handle?
> >
> >>
> >> Robin.
> >>
> >>>> +               power-domains = <&power RK3568_PD_VO>;
> >>>> +               reg-io-width = <4>;
> >>>> +               rockchip,grf = <&grf>;
> >>>> +               #sound-dai-cells = <0>;
> >>>> +               status = "disabled";
> >>>> +
> >>>> +               ports {
> >>>> +                       #address-cells = <1>;
> >>>> +                       #size-cells = <0>;
> >>>> +
> >>>> +                       hdmi_in: port@0 {
> >>>> +                               reg = <0>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +
> >>>> +                       hdmi_out: port@1 {
> >>>> +                               reg = <1>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +               };
> >>>> +       };
> >>>> +
> >>>>           qos_gpu: qos@fe128000 {
> >>>>                   compatible = "rockchip,rk3568-qos", "syscon";
> >>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
> >>>> --
> >>>> 2.30.2
> >>>>
> >>>
> >>> _______________________________________________
> >>> Linux-rockchip mailing list
> >>> Linux-rockchip@lists.infradead.org
> >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Peter Geis]

On Wed, Jan 26, 2022 at 2:25 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-01-26 18:44, Peter Geis wrote:
> > On Wed, Jan 26, 2022 at 12:56 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>
> >> On 2022-01-26 16:04, Peter Geis wrote:
> >>> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
> >>>>
> >>>> Add support for the HDMI port found on RK3568.
> >>>>
> >>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >>>> ---
> >>>>    arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
> >>>>    1 file changed, 36 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> index 4008bd666d01..e38fb223e9b8 100644
> >>>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> >>>> @@ -10,7 +10,6 @@
> >>>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>>>    #include <dt-bindings/power/rk3568-power.h>
> >>>>    #include <dt-bindings/soc/rockchip,boot-mode.h>
> >>>> -#include <dt-bindings/soc/rockchip,vop2.h>
> >>>>    #include <dt-bindings/thermal/thermal.h>
> >>>>
> >>>>    / {
> >>>> @@ -502,6 +501,42 @@ vop_mmu: iommu@fe043e00 {
> >>>>                   status = "disabled";
> >>>>           };
> >>>>
> >>>> +       hdmi: hdmi@fe0a0000 {
> >>>> +               compatible = "rockchip,rk3568-dw-hdmi";
> >>>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> >>>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +               clocks = <&cru PCLK_HDMI_HOST>,
> >>>> +                        <&cru CLK_HDMI_SFR>,
> >>>> +                        <&cru CLK_HDMI_CEC>,
> >>>> +                        <&pmucru CLK_HDMI_REF>,
> >>>> +                        <&cru HCLK_VOP>;
> >>>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
> >>>> +               pinctrl-names = "default";
> >>>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> >>>
> >>> I looked into CEC support here, and it seems that it does work with one change.
> >>> Please add the two following lines to your patch:
> >>> assigned-clocks = <&cru CLK_HDMI_CEC>;
> >>> assigned-clock-rates = <32768>;
> >>>
> >>> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> >>> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> >>> function.
> >>
> >> Wouldn't it make far more sense to just stick a suitable clk_set_rate()
> >> call in the driver? AFAICS it's already explicitly aware of the CEC clock.
> >
> > This is handled purely in the
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c driver, so I'm hesitant to
> > touch it there as it would affect all users, not just Rockchip.
>
> I'd have a strong hunch that it's a standard thing for the DesignWare IP
> and not affected by platform integration. I don't have the magical
> Synopsys databook, but between the trusty old i.MX6 manual and most of
> the other in-tree DTs getting their dw-hdmi "cec" clock from
> suspiciously-obviously-named sources, I'd be somewhat surprised if it
> was ever anything other than 32KHz.

My main concern was similar to the other HDMI clock issues, mainly
setting the clock can propagate up and affect other users of the
upstream clock.
I'll spin up a quick patch for this method.

Thanks,
Peter

>
> Robin.
>
> > Could someone familiar with the dw-hdmi IP weigh in on the minimum and
> > maximum clock rate the CEC block can handle?
> >
> >>
> >> Robin.
> >>
> >>>> +               power-domains = <&power RK3568_PD_VO>;
> >>>> +               reg-io-width = <4>;
> >>>> +               rockchip,grf = <&grf>;
> >>>> +               #sound-dai-cells = <0>;
> >>>> +               status = "disabled";
> >>>> +
> >>>> +               ports {
> >>>> +                       #address-cells = <1>;
> >>>> +                       #size-cells = <0>;
> >>>> +
> >>>> +                       hdmi_in: port@0 {
> >>>> +                               reg = <0>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +
> >>>> +                       hdmi_out: port@1 {
> >>>> +                               reg = <1>;
> >>>> +                               #address-cells = <1>;
> >>>> +                               #size-cells = <0>;
> >>>> +                       };
> >>>> +               };
> >>>> +       };
> >>>> +
> >>>>           qos_gpu: qos@fe128000 {
> >>>>                   compatible = "rockchip,rk3568-qos", "syscon";
> >>>>                   reg = <0x0 0xfe128000 0x0 0x20>;
> >>>> --
> >>>> 2.30.2
> >>>>
> >>>
> >>> _______________________________________________
> >>> Linux-rockchip mailing list
> >>> Linux-rockchip@lists.infradead.org
> >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 22/27] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..9a669240e49a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
 		regulator-max-microvolt = <12000000>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -390,3 +408,33 @@ &sdmmc0 {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2

[PATCH 22/27] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..9a669240e49a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
 		regulator-max-microvolt = <12000000>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -390,3 +408,33 @@ &sdmmc0 {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 22/27] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..9a669240e49a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
 		regulator-max-microvolt = <12000000>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -390,3 +408,33 @@ &sdmmc0 {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 22/27] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..9a669240e49a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
 		regulator-max-microvolt = <12000000>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -390,3 +408,33 @@ &sdmmc0 {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2

[PATCH 23/27] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

[Sascha Hauer]

From: Michael Riesch <michael.riesch@wolfvision.net>

Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 166399b7f13f..64de5b15f572 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -35,6 +36,17 @@ fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -205,6 +217,18 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -551,3 +575,27 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2

[PATCH 23/27] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

[Sascha Hauer]

From: Michael Riesch <michael.riesch@wolfvision.net>

Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 166399b7f13f..64de5b15f572 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -35,6 +36,17 @@ fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -205,6 +217,18 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -551,3 +575,27 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 23/27] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

[Sascha Hauer]

From: Michael Riesch <michael.riesch@wolfvision.net>

Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 166399b7f13f..64de5b15f572 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -35,6 +36,17 @@ fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -205,6 +217,18 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -551,3 +575,27 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 23/27] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a

[Sascha Hauer]

From: Michael Riesch <michael.riesch@wolfvision.net>

Enable the RK356x Video Output Processor (VOP) 2 on the Pine64
Quartz64 Model A.

Changes since v3:
- Fix HDMI connector type

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 166399b7f13f..64de5b15f572 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3566.dtsi"
 
 / {
@@ -35,6 +36,17 @@ fan: gpio_fan {
 		#cooling-cells = <2>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -205,6 +217,18 @@ &gmac1m0_clkinout
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -551,3 +575,27 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+		reg = <RK3568_VOP2_EP_HDMI>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2

[PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
cpll. gpll and cpll also drive many other clocks, so changing the
dclk_vop[012] clocks could change these other clocks as well. Drop
CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
only adjust the pixel clocks with the divider between the PLL and the
dclk_vop[012] which means the user may have to adjust the PLL clock to a
suitable rate using the assigned-clock-rate device tree property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 9d889fc46811..7687c62d1fa8 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
 			RK3568_CLKGATE_CON(20), 8, GFLAGS),
 	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
 			RK3568_CLKGATE_CON(20), 9, GFLAGS),
-	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 10, GFLAGS),
-	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 11, GFLAGS),
-	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
+	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 12, GFLAGS),
 	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
-- 
2.30.2

[PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
cpll. gpll and cpll also drive many other clocks, so changing the
dclk_vop[012] clocks could change these other clocks as well. Drop
CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
only adjust the pixel clocks with the divider between the PLL and the
dclk_vop[012] which means the user may have to adjust the PLL clock to a
suitable rate using the assigned-clock-rate device tree property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 9d889fc46811..7687c62d1fa8 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
 			RK3568_CLKGATE_CON(20), 8, GFLAGS),
 	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
 			RK3568_CLKGATE_CON(20), 9, GFLAGS),
-	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 10, GFLAGS),
-	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 11, GFLAGS),
-	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
+	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 12, GFLAGS),
 	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
cpll. gpll and cpll also drive many other clocks, so changing the
dclk_vop[012] clocks could change these other clocks as well. Drop
CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
only adjust the pixel clocks with the divider between the PLL and the
dclk_vop[012] which means the user may have to adjust the PLL clock to a
suitable rate using the assigned-clock-rate device tree property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 9d889fc46811..7687c62d1fa8 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
 			RK3568_CLKGATE_CON(20), 8, GFLAGS),
 	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
 			RK3568_CLKGATE_CON(20), 9, GFLAGS),
-	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 10, GFLAGS),
-	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 11, GFLAGS),
-	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
+	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 12, GFLAGS),
 	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
cpll. gpll and cpll also drive many other clocks, so changing the
dclk_vop[012] clocks could change these other clocks as well. Drop
CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
only adjust the pixel clocks with the divider between the PLL and the
dclk_vop[012] which means the user may have to adjust the PLL clock to a
suitable rate using the assigned-clock-rate device tree property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 9d889fc46811..7687c62d1fa8 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
 			RK3568_CLKGATE_CON(20), 8, GFLAGS),
 	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
 			RK3568_CLKGATE_CON(20), 9, GFLAGS),
-	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 10, GFLAGS),
-	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 11, GFLAGS),
-	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
+	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
 			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
 			RK3568_CLKGATE_CON(20), 12, GFLAGS),
 	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
-- 
2.30.2

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> cpll. gpll and cpll also drive many other clocks, so changing the
> dclk_vop[012] clocks could change these other clocks as well. Drop
> CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> only adjust the pixel clocks with the divider between the PLL and the
> dclk_vop[012] which means the user may have to adjust the PLL clock to a
> suitable rate using the assigned-clock-rate device tree property.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> index 9d889fc46811..7687c62d1fa8 100644
> --- a/drivers/clk/rockchip/clk-rk3568.c
> +++ b/drivers/clk/rockchip/clk-rk3568.c
> @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
>  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
>  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
>  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,

hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
(and even adding it below).

Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
us at least a suitable rate for the hdmi output, so the vop using that
should already find a nice rate to use.

The normal system-PLLs don't normally don't change their rate at runtime,
so I think we should liberate the dclks to select a PLL that best matches
their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.

That way the DCLKs can change to another PLL source if that provides
a rate nearer to their target.

Heiko

>  			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 10, GFLAGS),
> -	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 11, GFLAGS),
> -	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
> +	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 12, GFLAGS),
>  	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
> 

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> cpll. gpll and cpll also drive many other clocks, so changing the
> dclk_vop[012] clocks could change these other clocks as well. Drop
> CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> only adjust the pixel clocks with the divider between the PLL and the
> dclk_vop[012] which means the user may have to adjust the PLL clock to a
> suitable rate using the assigned-clock-rate device tree property.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> index 9d889fc46811..7687c62d1fa8 100644
> --- a/drivers/clk/rockchip/clk-rk3568.c
> +++ b/drivers/clk/rockchip/clk-rk3568.c
> @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
>  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
>  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
>  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,

hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
(and even adding it below).

Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
us at least a suitable rate for the hdmi output, so the vop using that
should already find a nice rate to use.

The normal system-PLLs don't normally don't change their rate at runtime,
so I think we should liberate the dclks to select a PLL that best matches
their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.

That way the DCLKs can change to another PLL source if that provides
a rate nearer to their target.

Heiko

>  			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 10, GFLAGS),
> -	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 11, GFLAGS),
> -	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
> +	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 12, GFLAGS),
>  	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> cpll. gpll and cpll also drive many other clocks, so changing the
> dclk_vop[012] clocks could change these other clocks as well. Drop
> CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> only adjust the pixel clocks with the divider between the PLL and the
> dclk_vop[012] which means the user may have to adjust the PLL clock to a
> suitable rate using the assigned-clock-rate device tree property.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> index 9d889fc46811..7687c62d1fa8 100644
> --- a/drivers/clk/rockchip/clk-rk3568.c
> +++ b/drivers/clk/rockchip/clk-rk3568.c
> @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
>  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
>  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
>  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,

hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
(and even adding it below).

Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
us at least a suitable rate for the hdmi output, so the vop using that
should already find a nice rate to use.

The normal system-PLLs don't normally don't change their rate at runtime,
so I think we should liberate the dclks to select a PLL that best matches
their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.

That way the DCLKs can change to another PLL source if that provides
a rate nearer to their target.

Heiko

>  			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 10, GFLAGS),
> -	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 11, GFLAGS),
> -	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
> +	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 12, GFLAGS),
>  	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
> 

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> cpll. gpll and cpll also drive many other clocks, so changing the
> dclk_vop[012] clocks could change these other clocks as well. Drop
> CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> only adjust the pixel clocks with the divider between the PLL and the
> dclk_vop[012] which means the user may have to adjust the PLL clock to a
> suitable rate using the assigned-clock-rate device tree property.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> index 9d889fc46811..7687c62d1fa8 100644
> --- a/drivers/clk/rockchip/clk-rk3568.c
> +++ b/drivers/clk/rockchip/clk-rk3568.c
> @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
>  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
>  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
>  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,

hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
(and even adding it below).

Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
us at least a suitable rate for the hdmi output, so the vop using that
should already find a nice rate to use.

The normal system-PLLs don't normally don't change their rate at runtime,
so I think we should liberate the dclks to select a PLL that best matches
their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.

That way the DCLKs can change to another PLL source if that provides
a rate nearer to their target.

Heiko

>  			RK3568_CLKSEL_CON(39), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 10, GFLAGS),
> -	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> +	COMPOSITE(DCLK_VOP1, "dclk_vop1", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(40), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 11, GFLAGS),
> -	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, 0,
> +	COMPOSITE(DCLK_VOP2, "dclk_vop2", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
>  			RK3568_CLKSEL_CON(41), 10, 2, MFLAGS, 0, 8, DFLAGS,
>  			RK3568_CLKGATE_CON(20), 12, GFLAGS),
>  	GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > cpll. gpll and cpll also drive many other clocks, so changing the
> > dclk_vop[012] clocks could change these other clocks as well. Drop
> > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > only adjust the pixel clocks with the divider between the PLL and the
> > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > suitable rate using the assigned-clock-rate device tree property.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > index 9d889fc46811..7687c62d1fa8 100644
> > --- a/drivers/clk/rockchip/clk-rk3568.c
> > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> 
> hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> (and even adding it below).
> 
> Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> us at least a suitable rate for the hdmi output, so the vop using that
> should already find a nice rate to use.
> 
> The normal system-PLLs don't normally don't change their rate at runtime,
> so I think we should liberate the dclks to select a PLL that best matches
> their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> 
> That way the DCLKs can change to another PLL source if that provides
> a rate nearer to their target.

The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
need that to program the HPLL clock to suitable rates for the HDMI
output. Now any other display choosing HPLL as parent, because that
provides the best rate in that point of time, hangs on a PLL which
changes its rate whenever the resolution is changed on the HDMI output.

Changing parents on rate changes only works when all possible parents of
all the children involved have a constant rate. IMO allowing reparenting
on rate changes is a poorly chosen default because it's very unsafe. We
should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > cpll. gpll and cpll also drive many other clocks, so changing the
> > dclk_vop[012] clocks could change these other clocks as well. Drop
> > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > only adjust the pixel clocks with the divider between the PLL and the
> > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > suitable rate using the assigned-clock-rate device tree property.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > index 9d889fc46811..7687c62d1fa8 100644
> > --- a/drivers/clk/rockchip/clk-rk3568.c
> > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> 
> hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> (and even adding it below).
> 
> Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> us at least a suitable rate for the hdmi output, so the vop using that
> should already find a nice rate to use.
> 
> The normal system-PLLs don't normally don't change their rate at runtime,
> so I think we should liberate the dclks to select a PLL that best matches
> their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> 
> That way the DCLKs can change to another PLL source if that provides
> a rate nearer to their target.

The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
need that to program the HPLL clock to suitable rates for the HDMI
output. Now any other display choosing HPLL as parent, because that
provides the best rate in that point of time, hangs on a PLL which
changes its rate whenever the resolution is changed on the HDMI output.

Changing parents on rate changes only works when all possible parents of
all the children involved have a constant rate. IMO allowing reparenting
on rate changes is a poorly chosen default because it's very unsafe. We
should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > cpll. gpll and cpll also drive many other clocks, so changing the
> > dclk_vop[012] clocks could change these other clocks as well. Drop
> > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > only adjust the pixel clocks with the divider between the PLL and the
> > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > suitable rate using the assigned-clock-rate device tree property.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > index 9d889fc46811..7687c62d1fa8 100644
> > --- a/drivers/clk/rockchip/clk-rk3568.c
> > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> 
> hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> (and even adding it below).
> 
> Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> us at least a suitable rate for the hdmi output, so the vop using that
> should already find a nice rate to use.
> 
> The normal system-PLLs don't normally don't change their rate at runtime,
> so I think we should liberate the dclks to select a PLL that best matches
> their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> 
> That way the DCLKs can change to another PLL source if that provides
> a rate nearer to their target.

The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
need that to program the HPLL clock to suitable rates for the HDMI
output. Now any other display choosing HPLL as parent, because that
provides the best rate in that point of time, hangs on a PLL which
changes its rate whenever the resolution is changed on the HDMI output.

Changing parents on rate changes only works when all possible parents of
all the children involved have a constant rate. IMO allowing reparenting
on rate changes is a poorly chosen default because it's very unsafe. We
should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Sascha Hauer]

On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > cpll. gpll and cpll also drive many other clocks, so changing the
> > dclk_vop[012] clocks could change these other clocks as well. Drop
> > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > only adjust the pixel clocks with the divider between the PLL and the
> > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > suitable rate using the assigned-clock-rate device tree property.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > index 9d889fc46811..7687c62d1fa8 100644
> > --- a/drivers/clk/rockchip/clk-rk3568.c
> > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> 
> hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> (and even adding it below).
> 
> Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> us at least a suitable rate for the hdmi output, so the vop using that
> should already find a nice rate to use.
> 
> The normal system-PLLs don't normally don't change their rate at runtime,
> so I think we should liberate the dclks to select a PLL that best matches
> their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> 
> That way the DCLKs can change to another PLL source if that provides
> a rate nearer to their target.

The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
need that to program the HPLL clock to suitable rates for the HDMI
output. Now any other display choosing HPLL as parent, because that
provides the best rate in that point of time, hangs on a PLL which
changes its rate whenever the resolution is changed on the HDMI output.

Changing parents on rate changes only works when all possible parents of
all the children involved have a constant rate. IMO allowing reparenting
on rate changes is a poorly chosen default because it's very unsafe. We
should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Montag, 31. Januar 2022, 09:10:42 CET schrieb Sascha Hauer:
> On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> > Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > > cpll. gpll and cpll also drive many other clocks, so changing the
> > > dclk_vop[012] clocks could change these other clocks as well. Drop
> > > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > > only adjust the pixel clocks with the divider between the PLL and the
> > > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > > suitable rate using the assigned-clock-rate device tree property.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > ---
> > >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > > index 9d889fc46811..7687c62d1fa8 100644
> > > --- a/drivers/clk/rockchip/clk-rk3568.c
> > > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> > >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> > >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> > >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> > 
> > hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> > (and even adding it below).
> > 
> > Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> > us at least a suitable rate for the hdmi output, so the vop using that
> > should already find a nice rate to use.
> > 
> > The normal system-PLLs don't normally don't change their rate at runtime,
> > so I think we should liberate the dclks to select a PLL that best matches
> > their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> > 
> > That way the DCLKs can change to another PLL source if that provides
> > a rate nearer to their target.
> 
> The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
> need that to program the HPLL clock to suitable rates for the HDMI
> output. Now any other display choosing HPLL as parent, because that
> provides the best rate in that point of time, hangs on a PLL which
> changes its rate whenever the resolution is changed on the HDMI output.

Ah, right ... the hpll is in the parent list, that changes things as you said.
I somehow only noticed the regular PLLs that normally have a constant
rate. So never mind ;-)


Heiko


> Changing parents on rate changes only works when all possible parents of
> all the children involved have a constant rate. IMO allowing reparenting
> on rate changes is a poorly chosen default because it's very unsafe. We
> should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.
> 
> Sascha
> 
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Montag, 31. Januar 2022, 09:10:42 CET schrieb Sascha Hauer:
> On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> > Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > > cpll. gpll and cpll also drive many other clocks, so changing the
> > > dclk_vop[012] clocks could change these other clocks as well. Drop
> > > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > > only adjust the pixel clocks with the divider between the PLL and the
> > > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > > suitable rate using the assigned-clock-rate device tree property.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > ---
> > >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > > index 9d889fc46811..7687c62d1fa8 100644
> > > --- a/drivers/clk/rockchip/clk-rk3568.c
> > > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> > >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> > >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> > >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> > 
> > hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> > (and even adding it below).
> > 
> > Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> > us at least a suitable rate for the hdmi output, so the vop using that
> > should already find a nice rate to use.
> > 
> > The normal system-PLLs don't normally don't change their rate at runtime,
> > so I think we should liberate the dclks to select a PLL that best matches
> > their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> > 
> > That way the DCLKs can change to another PLL source if that provides
> > a rate nearer to their target.
> 
> The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
> need that to program the HPLL clock to suitable rates for the HDMI
> output. Now any other display choosing HPLL as parent, because that
> provides the best rate in that point of time, hangs on a PLL which
> changes its rate whenever the resolution is changed on the HDMI output.

Ah, right ... the hpll is in the parent list, that changes things as you said.
I somehow only noticed the regular PLLs that normally have a constant
rate. So never mind ;-)


Heiko


> Changing parents on rate changes only works when all possible parents of
> all the children involved have a constant rate. IMO allowing reparenting
> on rate changes is a poorly chosen default because it's very unsafe. We
> should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.
> 
> Sascha
> 
> 

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Montag, 31. Januar 2022, 09:10:42 CET schrieb Sascha Hauer:
> On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> > Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > > cpll. gpll and cpll also drive many other clocks, so changing the
> > > dclk_vop[012] clocks could change these other clocks as well. Drop
> > > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > > only adjust the pixel clocks with the divider between the PLL and the
> > > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > > suitable rate using the assigned-clock-rate device tree property.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > ---
> > >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > > index 9d889fc46811..7687c62d1fa8 100644
> > > --- a/drivers/clk/rockchip/clk-rk3568.c
> > > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> > >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> > >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> > >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> > 
> > hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> > (and even adding it below).
> > 
> > Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> > us at least a suitable rate for the hdmi output, so the vop using that
> > should already find a nice rate to use.
> > 
> > The normal system-PLLs don't normally don't change their rate at runtime,
> > so I think we should liberate the dclks to select a PLL that best matches
> > their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> > 
> > That way the DCLKs can change to another PLL source if that provides
> > a rate nearer to their target.
> 
> The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
> need that to program the HPLL clock to suitable rates for the HDMI
> output. Now any other display choosing HPLL as parent, because that
> provides the best rate in that point of time, hangs on a PLL which
> changes its rate whenever the resolution is changed on the HDMI output.

Ah, right ... the hpll is in the parent list, that changes things as you said.
I somehow only noticed the regular PLLs that normally have a constant
rate. So never mind ;-)


Heiko


> Changing parents on rate changes only works when all possible parents of
> all the children involved have a constant rate. IMO allowing reparenting
> on rate changes is a poorly chosen default because it's very unsafe. We
> should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.
> 
> Sascha
> 
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*

[Heiko Stübner]

Am Montag, 31. Januar 2022, 09:10:42 CET schrieb Sascha Hauer:
> On Sat, Jan 29, 2022 at 06:48:13PM +0100, Heiko Stübner wrote:
> > Am Mittwoch, 26. Januar 2022, 15:55:46 CET schrieb Sascha Hauer:
> > > The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or
> > > cpll. gpll and cpll also drive many other clocks, so changing the
> > > dclk_vop[012] clocks could change these other clocks as well. Drop
> > > CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can
> > > only adjust the pixel clocks with the divider between the PLL and the
> > > dclk_vop[012] which means the user may have to adjust the PLL clock to a
> > > suitable rate using the assigned-clock-rate device tree property.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > ---
> > >  drivers/clk/rockchip/clk-rk3568.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
> > > index 9d889fc46811..7687c62d1fa8 100644
> > > --- a/drivers/clk/rockchip/clk-rk3568.c
> > > +++ b/drivers/clk/rockchip/clk-rk3568.c
> > > @@ -1044,13 +1044,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = {
> > >  			RK3568_CLKGATE_CON(20), 8, GFLAGS),
> > >  	GATE(HCLK_VOP, "hclk_vop", "hclk_vo", 0,
> > >  			RK3568_CLKGATE_CON(20), 9, GFLAGS),
> > > -	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> > > +	COMPOSITE(DCLK_VOP0, "dclk_vop0", hpll_vpll_gpll_cpll_p, CLK_SET_RATE_NO_REPARENT,
> > 
> > hmm, I'm wondering about the use of having CLK_SET_RATE_NO_REPARENT here
> > (and even adding it below).
> > 
> > Using SET_RATE_PARENT in the following patch for the hdmi-pll, should give
> > us at least a suitable rate for the hdmi output, so the vop using that
> > should already find a nice rate to use.
> > 
> > The normal system-PLLs don't normally don't change their rate at runtime,
> > so I think we should liberate the dclks to select a PLL that best matches
> > their target rate - so drop the CLK_SET_RATE_NO_REPARENT as well.
> > 
> > That way the DCLKs can change to another PLL source if that provides
> > a rate nearer to their target.
> 
> The HDMI reference clock has the CLK_SET_RATE_PARENT flag set and we
> need that to program the HPLL clock to suitable rates for the HDMI
> output. Now any other display choosing HPLL as parent, because that
> provides the best rate in that point of time, hangs on a PLL which
> changes its rate whenever the resolution is changed on the HDMI output.

Ah, right ... the hpll is in the parent list, that changes things as you said.
I somehow only noticed the regular PLLs that normally have a constant
rate. So never mind ;-)


Heiko


> Changing parents on rate changes only works when all possible parents of
> all the children involved have a constant rate. IMO allowing reparenting
> on rate changes is a poorly chosen default because it's very unsafe. We
> should rather have a CLK_SET_RATE_ALLOW_REPARENT flag.
> 
> Sascha
> 
> 

[PATCH 25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock

[Sascha Hauer]

On the rk3568 we have this (simplified) situation:

 .--------.     .-----.    .---------.
-| hpll   |--.--| /n  |----|dclk_vop0|-
 `--------´  |  `-----´    `---------´
             |  .-----.    .---------.
             `--| /m  |----|dclk_vop1|-
             |  `-----´    `---------´
             |             .---------.
             `-------------|hdmi_ref |-
                           `---------´

For the HDMI to work the HDMI reference clock needs to be the same as the
pixel clock which means the dividers have be set to one. The last patch removed
the CLK_SET_RATE_PARENT flag from the pixel clocks which means the hpll is not
changed on pixel clock changes. In order to allow the HDMI controller to
set a suitable PLL rate we now add the CLK_SET_RATE_PARENT flag to the
HDMI reference clock. With this the flow becomes:

1) HDMI controller driver sets the rate to its pixel clock which means
   hpll is set to the pixel clock
2) VOP2 driver sets dclk_vop[012] to the pixel clock. As this can't change
   the hpll clock anymore this means only the divider is adjusted to the
   desired value of dividing by one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 7687c62d1fa8..63dfbeeeb06d 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1568,7 +1568,7 @@ static struct rockchip_clk_branch rk3568_clk_pmu_branches[] __initdata = {
 			RK3568_PMU_CLKGATE_CON(2), 14, GFLAGS),
 	GATE(XIN_OSC0_EDPPHY_G, "xin_osc0_edpphy_g", "xin24m", 0,
 			RK3568_PMU_CLKGATE_CON(2), 15, GFLAGS),
-	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, 0,
+	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, CLK_SET_RATE_PARENT,
 			RK3568_PMU_CLKSEL_CON(8), 7, 1, MFLAGS),
 };
 
-- 
2.30.2

[PATCH 25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock

[Sascha Hauer]

On the rk3568 we have this (simplified) situation:

 .--------.     .-----.    .---------.
-| hpll   |--.--| /n  |----|dclk_vop0|-
 `--------´  |  `-----´    `---------´
             |  .-----.    .---------.
             `--| /m  |----|dclk_vop1|-
             |  `-----´    `---------´
             |             .---------.
             `-------------|hdmi_ref |-
                           `---------´

For the HDMI to work the HDMI reference clock needs to be the same as the
pixel clock which means the dividers have be set to one. The last patch removed
the CLK_SET_RATE_PARENT flag from the pixel clocks which means the hpll is not
changed on pixel clock changes. In order to allow the HDMI controller to
set a suitable PLL rate we now add the CLK_SET_RATE_PARENT flag to the
HDMI reference clock. With this the flow becomes:

1) HDMI controller driver sets the rate to its pixel clock which means
   hpll is set to the pixel clock
2) VOP2 driver sets dclk_vop[012] to the pixel clock. As this can't change
   the hpll clock anymore this means only the divider is adjusted to the
   desired value of dividing by one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 7687c62d1fa8..63dfbeeeb06d 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1568,7 +1568,7 @@ static struct rockchip_clk_branch rk3568_clk_pmu_branches[] __initdata = {
 			RK3568_PMU_CLKGATE_CON(2), 14, GFLAGS),
 	GATE(XIN_OSC0_EDPPHY_G, "xin_osc0_edpphy_g", "xin24m", 0,
 			RK3568_PMU_CLKGATE_CON(2), 15, GFLAGS),
-	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, 0,
+	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, CLK_SET_RATE_PARENT,
 			RK3568_PMU_CLKSEL_CON(8), 7, 1, MFLAGS),
 };
 
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock

[Sascha Hauer]

On the rk3568 we have this (simplified) situation:

 .--------.     .-----.    .---------.
-| hpll   |--.--| /n  |----|dclk_vop0|-
 `--------´  |  `-----´    `---------´
             |  .-----.    .---------.
             `--| /m  |----|dclk_vop1|-
             |  `-----´    `---------´
             |             .---------.
             `-------------|hdmi_ref |-
                           `---------´

For the HDMI to work the HDMI reference clock needs to be the same as the
pixel clock which means the dividers have be set to one. The last patch removed
the CLK_SET_RATE_PARENT flag from the pixel clocks which means the hpll is not
changed on pixel clock changes. In order to allow the HDMI controller to
set a suitable PLL rate we now add the CLK_SET_RATE_PARENT flag to the
HDMI reference clock. With this the flow becomes:

1) HDMI controller driver sets the rate to its pixel clock which means
   hpll is set to the pixel clock
2) VOP2 driver sets dclk_vop[012] to the pixel clock. As this can't change
   the hpll clock anymore this means only the divider is adjusted to the
   desired value of dividing by one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 7687c62d1fa8..63dfbeeeb06d 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1568,7 +1568,7 @@ static struct rockchip_clk_branch rk3568_clk_pmu_branches[] __initdata = {
 			RK3568_PMU_CLKGATE_CON(2), 14, GFLAGS),
 	GATE(XIN_OSC0_EDPPHY_G, "xin_osc0_edpphy_g", "xin24m", 0,
 			RK3568_PMU_CLKGATE_CON(2), 15, GFLAGS),
-	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, 0,
+	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, CLK_SET_RATE_PARENT,
 			RK3568_PMU_CLKSEL_CON(8), 7, 1, MFLAGS),
 };
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock

[Sascha Hauer]

On the rk3568 we have this (simplified) situation:

 .--------.     .-----.    .---------.
-| hpll   |--.--| /n  |----|dclk_vop0|-
 `--------´  |  `-----´    `---------´
             |  .-----.    .---------.
             `--| /m  |----|dclk_vop1|-
             |  `-----´    `---------´
             |             .---------.
             `-------------|hdmi_ref |-
                           `---------´

For the HDMI to work the HDMI reference clock needs to be the same as the
pixel clock which means the dividers have be set to one. The last patch removed
the CLK_SET_RATE_PARENT flag from the pixel clocks which means the hpll is not
changed on pixel clock changes. In order to allow the HDMI controller to
set a suitable PLL rate we now add the CLK_SET_RATE_PARENT flag to the
HDMI reference clock. With this the flow becomes:

1) HDMI controller driver sets the rate to its pixel clock which means
   hpll is set to the pixel clock
2) VOP2 driver sets dclk_vop[012] to the pixel clock. As this can't change
   the hpll clock anymore this means only the divider is adjusted to the
   desired value of dividing by one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/rockchip/clk-rk3568.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 7687c62d1fa8..63dfbeeeb06d 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1568,7 +1568,7 @@ static struct rockchip_clk_branch rk3568_clk_pmu_branches[] __initdata = {
 			RK3568_PMU_CLKGATE_CON(2), 14, GFLAGS),
 	GATE(XIN_OSC0_EDPPHY_G, "xin_osc0_edpphy_g", "xin24m", 0,
 			RK3568_PMU_CLKGATE_CON(2), 15, GFLAGS),
-	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, 0,
+	MUX(CLK_HDMI_REF, "clk_hdmi_ref", clk_hdmi_ref_p, CLK_SET_RATE_PARENT,
 			RK3568_PMU_CLKSEL_CON(8), 7, 1, MFLAGS),
 };
 
-- 
2.30.2

[PATCH 26/27] drm/rockchip: Make VOP driver optional

[Sascha Hauer]

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig            | 8 ++++++++
 drivers/gpu/drm/rockchip/Makefile           | 3 ++-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 9f1ecefc3933..b9b156308460 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -21,8 +21,16 @@ config DRM_ROCKCHIP
 
 if DRM_ROCKCHIP
 
+config ROCKCHIP_VOP
+	bool "Rockchip VOP driver"
+	default y
+	help
+	  This selects support for the VOP driver. You should enable it
+	  on all older SoCs up to RK3399.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
+	depends on ROCKCHIP_VOP
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the Analogix Core DP driver. If you want to enable DP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index 1a56f696558c..dfc5512fdb9f 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -4,8 +4,9 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
-		rockchip_drm_gem.o rockchip_drm_vop.o rockchip_vop_reg.o
+		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index bec207de4544..82c8faf1fb6b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -458,7 +458,7 @@ static int __init rockchip_drm_init(void)
 	int ret;
 
 	num_rockchip_sub_drivers = 0;
-	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_DRM_ROCKCHIP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
-- 
2.30.2

[PATCH 26/27] drm/rockchip: Make VOP driver optional

[Sascha Hauer]

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig            | 8 ++++++++
 drivers/gpu/drm/rockchip/Makefile           | 3 ++-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 9f1ecefc3933..b9b156308460 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -21,8 +21,16 @@ config DRM_ROCKCHIP
 
 if DRM_ROCKCHIP
 
+config ROCKCHIP_VOP
+	bool "Rockchip VOP driver"
+	default y
+	help
+	  This selects support for the VOP driver. You should enable it
+	  on all older SoCs up to RK3399.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
+	depends on ROCKCHIP_VOP
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the Analogix Core DP driver. If you want to enable DP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index 1a56f696558c..dfc5512fdb9f 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -4,8 +4,9 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
-		rockchip_drm_gem.o rockchip_drm_vop.o rockchip_vop_reg.o
+		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index bec207de4544..82c8faf1fb6b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -458,7 +458,7 @@ static int __init rockchip_drm_init(void)
 	int ret;
 
 	num_rockchip_sub_drivers = 0;
-	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_DRM_ROCKCHIP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 26/27] drm/rockchip: Make VOP driver optional

[Sascha Hauer]

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig            | 8 ++++++++
 drivers/gpu/drm/rockchip/Makefile           | 3 ++-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 9f1ecefc3933..b9b156308460 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -21,8 +21,16 @@ config DRM_ROCKCHIP
 
 if DRM_ROCKCHIP
 
+config ROCKCHIP_VOP
+	bool "Rockchip VOP driver"
+	default y
+	help
+	  This selects support for the VOP driver. You should enable it
+	  on all older SoCs up to RK3399.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
+	depends on ROCKCHIP_VOP
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the Analogix Core DP driver. If you want to enable DP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index 1a56f696558c..dfc5512fdb9f 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -4,8 +4,9 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
-		rockchip_drm_gem.o rockchip_drm_vop.o rockchip_vop_reg.o
+		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index bec207de4544..82c8faf1fb6b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -458,7 +458,7 @@ static int __init rockchip_drm_init(void)
 	int ret;
 
 	num_rockchip_sub_drivers = 0;
-	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_DRM_ROCKCHIP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 26/27] drm/rockchip: Make VOP driver optional

[Sascha Hauer]

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig            | 8 ++++++++
 drivers/gpu/drm/rockchip/Makefile           | 3 ++-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 9f1ecefc3933..b9b156308460 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -21,8 +21,16 @@ config DRM_ROCKCHIP
 
 if DRM_ROCKCHIP
 
+config ROCKCHIP_VOP
+	bool "Rockchip VOP driver"
+	default y
+	help
+	  This selects support for the VOP driver. You should enable it
+	  on all older SoCs up to RK3399.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
+	depends on ROCKCHIP_VOP
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the Analogix Core DP driver. If you want to enable DP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index 1a56f696558c..dfc5512fdb9f 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -4,8 +4,9 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
-		rockchip_drm_gem.o rockchip_drm_vop.o rockchip_vop_reg.o
+		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index bec207de4544..82c8faf1fb6b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -458,7 +458,7 @@ static int __init rockchip_drm_init(void)
 	int ret;
 
 	num_rockchip_sub_drivers = 0;
-	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_DRM_ROCKCHIP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
-- 
2.30.2

[PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

From: Andy Yan <andy.yan@rock-chips.com>

The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.

This driver has been derived from the downstream Rockchip Kernel and
heavily modified:

- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
  functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs

The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.

Changes since v3:
- Sort includes
- fix typos
- Drop spinlock
- Use regmap_set_bits()/regmap_clear_bits()
- simplify vop2_scale_factor()
- simplify vop2_afbc_transform_offset()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig             |    6 +
 drivers/gpu/drm/rockchip/Makefile            |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c  |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h  |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c   |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h  |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2665 ++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  480 ++++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c |  285 ++
 9 files changed, 3461 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index b9b156308460..4ff0043f0ee7 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -28,6 +28,12 @@ config ROCKCHIP_VOP
 	  This selects support for the VOP driver. You should enable it
 	  on all older SoCs up to RK3399.
 
+config ROCKCHIP_VOP2
+	bool "Rockchip VOP2 driver"
+	help
+	  This selects support for the VOP2 driver. You should enable it
+	  on all newer SoCs beginning form RK3568.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
 	depends on ROCKCHIP_VOP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index dfc5512fdb9f..3ff7b21c0414 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,6 +6,7 @@
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
 		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP2) += rockchip_drm_vop2.o rockchip_vop2_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 82c8faf1fb6b..95f6c5985fdd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -459,6 +459,7 @@ static int __init rockchip_drm_init(void)
 
 	num_rockchip_sub_drivers = 0;
 	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop2_platform_driver, CONFIG_ROCKCHIP_VOP2);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 143a48330f84..6e1f97e1e4a6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -18,7 +18,7 @@
 
 #define ROCKCHIP_MAX_FB_BUFFER	3
 #define ROCKCHIP_MAX_CONNECTOR	2
-#define ROCKCHIP_MAX_CRTC	2
+#define ROCKCHIP_MAX_CRTC	4
 
 struct drm_device;
 struct drm_connector;
@@ -31,6 +31,9 @@ struct rockchip_crtc_state {
 	int output_bpc;
 	int output_flags;
 	bool enable_afbc;
+	uint32_t bus_format;
+	u32 bus_flags;
+	int color_space;
 };
 #define to_rockchip_crtc_state(s) \
 		container_of(s, struct rockchip_crtc_state, base)
@@ -63,4 +66,6 @@ extern struct platform_driver rockchip_dp_driver;
 extern struct platform_driver rockchip_lvds_driver;
 extern struct platform_driver vop_platform_driver;
 extern struct platform_driver rk3066_hdmi_driver;
+extern struct platform_driver vop2_platform_driver;
+
 #endif /* _ROCKCHIP_DRM_DRV_H_ */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
index 3aa37e177667..0d2cb4f3922b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
@@ -134,4 +134,6 @@ void rockchip_drm_mode_config_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = &rockchip_drm_mode_config_funcs;
 	dev->mode_config.helper_private = &rockchip_mode_config_helpers;
+
+	dev->mode_config.normalize_zpos = true;
 }
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index 857d97cdc67c..1e364d7b50e6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -54,9 +54,23 @@ struct vop_afbc {
 	struct vop_reg enable;
 	struct vop_reg win_sel;
 	struct vop_reg format;
+	struct vop_reg rb_swap;
+	struct vop_reg uv_swap;
+	struct vop_reg auto_gating_en;
+	struct vop_reg block_split_en;
+	struct vop_reg pic_vir_width;
+	struct vop_reg tile_num;
 	struct vop_reg hreg_block_split;
+	struct vop_reg pic_offset;
 	struct vop_reg pic_size;
+	struct vop_reg dsp_offset;
+	struct vop_reg transform_offset;
 	struct vop_reg hdr_ptr;
+	struct vop_reg half_block_en;
+	struct vop_reg xmirror;
+	struct vop_reg ymirror;
+	struct vop_reg rotate_270;
+	struct vop_reg rotate_90;
 	struct vop_reg rstn;
 };
 
@@ -410,4 +424,5 @@ static inline int scl_vop_cal_lb_mode(int width, bool is_yuv)
 }
 
 extern const struct component_ops vop_component_ops;
+
 #endif /* _ROCKCHIP_DRM_VOP_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
new file mode 100644
index 000000000000..9ceaae97ed0c
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -0,0 +1,2665 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/swab.h>
+
+#include <drm/drm.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_debugfs.h>
+#include <drm/drm_flip_work.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <uapi/linux/videodev2.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_gem.h"
+#include "rockchip_drm_fb.h"
+#include "rockchip_drm_vop2.h"
+
+/*
+ * VOP2 architecture
+ *
+ +----------+   +-------------+                                                        +-----------+
+ |  Cluster |   | Sel 1 from 6|                                                        | 1 from 3  |
+ |  window0 |   |    Layer0   |                                                        |    RGB    |
+ +----------+   +-------------+              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 layers|    |             |
+ |  Cluster |   | Sel 1 from 6|              |   Overlay0    +--->| Video Port0 |      +-----------+
+ |  window1 |   |    Layer1   |              |               |    |             |      | 1 from 3  |
+ +----------+   +-------------+              +---------------+    +-------------+      |   LVDS    |
+ +----------+   +-------------+                                                        +-----------+
+ |  Esmart  |   | Sel 1 from 6|
+ |  window0 |   |   Layer2    |              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 Layers|    |             | +--> | 1 from 3  |
+ +----------+   +-------------+   -------->  |   Overlay1    +--->| Video Port1 |      |   MIPI    |
+ |  Esmart  |   | Sel 1 from 6|   -------->  |               |    |             |      +-----------+
+ |  Window1 |   |   Layer3    |              +---------------+    +-------------+
+ +----------+   +-------------+                                                        +-----------+
+ +----------+   +-------------+                                                        | 1 from 3  |
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |   HDMI    |
+ |  Window0 |   |    Layer4   |              |N from 6 Layers|    |             |      +-----------+
+ +----------+   +-------------+              |   Overlay2    +--->| Video Port2 |
+ +----------+   +-------------+              |               |    |             |      +-----------+
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |  1 from 3 |
+ |  Window1 |   |    Layer5   |                                                        |    eDP    |
+ +----------+   +-------------+                                                        +-----------+
+ *
+ */
+
+enum vop2_data_format {
+	VOP2_FMT_ARGB8888 = 0,
+	VOP2_FMT_RGB888,
+	VOP2_FMT_RGB565,
+	VOP2_FMT_XRGB101010,
+	VOP2_FMT_YUV420SP,
+	VOP2_FMT_YUV422SP,
+	VOP2_FMT_YUV444SP,
+	VOP2_FMT_YUYV422 = 8,
+	VOP2_FMT_YUYV420,
+	VOP2_FMT_VYUY422,
+	VOP2_FMT_VYUY420,
+	VOP2_FMT_YUV420SP_TILE_8x4 = 0x10,
+	VOP2_FMT_YUV420SP_TILE_16x2,
+	VOP2_FMT_YUV422SP_TILE_8x4,
+	VOP2_FMT_YUV422SP_TILE_16x2,
+	VOP2_FMT_YUV420SP_10,
+	VOP2_FMT_YUV422SP_10,
+	VOP2_FMT_YUV444SP_10,
+};
+
+enum vop2_afbc_format {
+	VOP2_AFBC_FMT_RGB565,
+	VOP2_AFBC_FMT_ARGB2101010 = 2,
+	VOP2_AFBC_FMT_YUV420_10BIT,
+	VOP2_AFBC_FMT_RGB888,
+	VOP2_AFBC_FMT_ARGB8888,
+	VOP2_AFBC_FMT_YUV420 = 9,
+	VOP2_AFBC_FMT_YUV422 = 0xb,
+	VOP2_AFBC_FMT_YUV422_10BIT = 0xe,
+	VOP2_AFBC_FMT_INVALID = -1,
+};
+
+union vop2_alpha_ctrl {
+	uint32_t val;
+	struct {
+		/* [0:1] */
+		uint32_t color_mode:1;
+		uint32_t alpha_mode:1;
+		/* [2:3] */
+		uint32_t blend_mode:2;
+		uint32_t alpha_cal_mode:1;
+		/* [5:7] */
+		uint32_t factor_mode:3;
+		/* [8:9] */
+		uint32_t alpha_en:1;
+		uint32_t src_dst_swap:1;
+		uint32_t reserved:6;
+		/* [16:23] */
+		uint32_t glb_alpha:8;
+	} bits;
+};
+
+struct vop2_alpha {
+	union vop2_alpha_ctrl src_color_ctrl;
+	union vop2_alpha_ctrl dst_color_ctrl;
+	union vop2_alpha_ctrl src_alpha_ctrl;
+	union vop2_alpha_ctrl dst_alpha_ctrl;
+};
+
+struct vop2_alpha_config {
+	bool src_premulti_en;
+	bool dst_premulti_en;
+	bool src_pixel_alpha_en;
+	bool dst_pixel_alpha_en;
+	uint16_t src_glb_alpha_value;
+	uint16_t dst_glb_alpha_value;
+};
+
+struct vop2_win {
+	struct vop2 *vop2;
+	struct drm_plane base;
+	const struct vop2_win_data *data;
+	struct regmap_field *reg[VOP2_WIN_MAX_REG];
+
+	/**
+	 * @win_id: graphic window id, a cluster may be split into two
+	 * graphics windows.
+	 */
+	uint8_t win_id;
+
+	uint32_t offset;
+
+	uint8_t delay;
+	enum drm_plane_type type;
+};
+
+struct vop2_video_port {
+	struct drm_crtc crtc;
+	struct vop2 *vop2;
+	struct clk *dclk;
+	uint8_t id;
+	const struct vop2_video_port_regs *regs;
+	const struct vop2_video_port_data *data;
+
+	struct completion dsp_hold_completion;
+
+	/**
+	 * @win_mask: Bitmask of windows attached to the video port;
+	 */
+	uint32_t win_mask;
+
+	struct vop2_win *primary_plane;
+	struct drm_pending_vblank_event *event;
+
+	int nlayers;
+};
+
+struct vop2 {
+	struct device *dev;
+	struct drm_device *drm;
+	struct vop2_video_port vps[ROCKCHIP_MAX_CRTC];
+
+	const struct vop2_data *data;
+	/*
+	 * Number of windows that are registered as plane, may be less than the
+	 * total number of hardware windows.
+	 */
+	uint32_t registered_num_wins;
+
+	void __iomem *regs;
+	struct regmap *map;
+
+	struct regmap *grf;
+
+	/* physical map length of vop2 register */
+	uint32_t len;
+
+	void __iomem *lut_regs;
+
+	/* protects crtc enable/disable */
+	struct mutex vop2_lock;
+
+	int irq;
+
+	/*
+	 * Some global resources are shared between all video ports(crtcs), so
+	 * we need a ref counter here.
+	 */
+	unsigned int enable_count;
+	struct clk *hclk;
+	struct clk *aclk;
+
+	/* must be put at the end of the struct */
+	struct vop2_win win[];
+};
+
+static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
+{
+	return container_of(crtc, struct vop2_video_port, crtc);
+}
+
+static struct vop2_win *to_vop2_win(struct drm_plane *p)
+{
+	return container_of(p, struct vop2_win, base);
+}
+
+static void vop2_lock(struct vop2 *vop2)
+{
+	mutex_lock(&vop2->vop2_lock);
+}
+
+static void vop2_unlock(struct vop2 *vop2)
+{
+	mutex_unlock(&vop2->vop2_lock);
+}
+
+static void vop2_writel(struct vop2 *vop2, uint32_t offset, uint32_t v)
+{
+	regmap_write(vop2->map, offset, v);
+}
+
+static void vop2_vp_write(struct vop2_video_port *vp, uint32_t offset,
+			  uint32_t v)
+{
+	regmap_write(vp->vop2->map, vp->data->offset + offset, v);
+}
+
+static uint32_t vop2_readl(struct vop2 *vop2, uint32_t offset)
+{
+	uint32_t val;
+
+	regmap_read(vop2->map, offset, &val);
+
+	return val;
+}
+
+static void vop2_win_write(const struct vop2_win *win, unsigned int reg,
+			   uint32_t v)
+{
+	regmap_field_write(win->reg[reg], v);
+}
+
+static bool vop2_cluster_window(const struct vop2_win *win)
+{
+	return win->data->feature & WIN_FEATURE_CLUSTER;
+}
+
+static void vop2_cfg_done(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
+			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+}
+
+static void vop2_win_disable(struct vop2_win *win)
+{
+	vop2_win_write(win, VOP2_WIN_ENABLE, 0);
+
+	if (vop2_cluster_window(win))
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 0);
+}
+
+static enum vop2_data_format vop2_convert_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_FMT_YUV420SP;
+	case DRM_FORMAT_NV16:
+		return VOP2_FMT_YUV422SP;
+	case DRM_FORMAT_NV24:
+		return VOP2_FMT_YUV444SP;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+		return VOP2_FMT_VYUY422;
+	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_UYVY:
+		return VOP2_FMT_YUYV422;
+	default:
+		DRM_ERROR("unsupported format[%08x]\n", format);
+		return -EINVAL;
+	}
+}
+
+static enum vop2_afbc_format vop2_convert_afbc_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_AFBC_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_AFBC_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_AFBC_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_AFBC_FMT_YUV420;
+	case DRM_FORMAT_NV16:
+		return VOP2_AFBC_FMT_YUV422;
+	default:
+		return VOP2_AFBC_FMT_INVALID;
+	}
+
+	return VOP2_AFBC_FMT_INVALID;
+}
+
+static bool vop2_win_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_BGR565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_dither_up(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_output_uv_swap(uint32_t bus_format, uint32_t output_mode)
+{
+	/*
+	 * FIXME:
+	 *
+	 * There is no media type for YUV444 output,
+	 * so when out_mode is AAAA or P888, assume output is YUV444 on
+	 * yuv format.
+	 *
+	 * From H/W testing, YUV444 mode need a rb swap.
+	 */
+	if (bus_format == MEDIA_BUS_FMT_YVYU8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_YVYU8_2X8 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_2X8 ||
+	    ((bus_format == MEDIA_BUS_FMT_YUV8_1X24 ||
+	      bus_format == MEDIA_BUS_FMT_YUV10_1X30) &&
+	     (output_mode == ROCKCHIP_OUT_MODE_AAAA ||
+	      output_mode == ROCKCHIP_OUT_MODE_P888)))
+		return true;
+	else
+		return false;
+}
+
+static bool is_yuv_output(uint32_t bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+	case MEDIA_BUS_FMT_YUYV8_2X8:
+	case MEDIA_BUS_FMT_YVYU8_2X8:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+	case MEDIA_BUS_FMT_VYUY8_2X8:
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_YVYU8_1X16:
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_VYUY8_1X16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rockchip_afbc(struct drm_plane *plane, u64 modifier)
+{
+	int i;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return false;
+
+	for (i = 0 ; i < plane->modifier_count; i++)
+		if (plane->modifiers[i] == modifier)
+			return true;
+
+	return false;
+
+}
+
+static bool rockchip_vop2_mod_supported(struct drm_plane *plane, uint32_t format, u64 modifier)
+{
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	if (modifier == DRM_FORMAT_MOD_INVALID)
+		return false;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return true;
+
+	if (!rockchip_afbc(plane, modifier)) {
+		drm_err(vop2->drm, "Unsupported format modifier 0x%llx\n", modifier);
+
+		return false;
+	}
+
+	return vop2_convert_afbc_format(format) >= 0;
+}
+
+static uint32_t vop2_afbc_transform_offset(struct drm_plane_state *pstate,
+					   bool afbc_half_block_en)
+{
+	struct drm_rect *src = &pstate->src;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t vir_width = (fb->pitches[0] << 3) / bpp;
+	uint32_t width = drm_rect_width(src) >> 16;
+	uint32_t height = drm_rect_height(src) >> 16;
+	uint32_t act_xoffset = src->x1 >> 16;
+	uint32_t act_yoffset = src->y1 >> 16;
+	uint32_t align16_crop = 0;
+	uint32_t align64_crop = 0;
+	uint32_t height_tmp;
+	uint8_t tx, ty;
+	uint8_t bottom_crop_line_num = 0;
+
+	/* 16 pixel align */
+	if (height & 0xf)
+		align16_crop = 16 - (height & 0xf);
+
+	height_tmp = height + align16_crop;
+
+	/* 64 pixel align */
+	if (height_tmp & 0x3f)
+		align64_crop = 64 - (height_tmp & 0x3f);
+
+	bottom_crop_line_num = align16_crop + align64_crop;
+
+	switch (pstate->rotation &
+		(DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y |
+		 DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270)) {
+	case DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_Y:
+		tx = act_xoffset;
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case 0:
+		tx = act_xoffset;
+		ty = act_yoffset;
+		break;
+	}
+
+	if (afbc_half_block_en)
+		ty &= 0x7f;
+
+#define TRANSFORM_XOFFSET GENMASK(7, 0)
+#define TRANSFORM_YOFFSET GENMASK(23, 16)
+	return FIELD_PREP(TRANSFORM_XOFFSET, tx) |
+		FIELD_PREP(TRANSFORM_YOFFSET, ty);
+}
+
+/*
+ * A Cluster window has 2048 x 16 line buffer, which can
+ * works at 2048 x 16(Full) or 4096 x 8 (Half) mode.
+ * for Cluster_lb_mode register:
+ * 0: half mode, for plane input width range 2048 ~ 4096
+ * 1: half mode, for cluster work at 2 * 2048 plane mode
+ * 2: half mode, for rotate_90/270 mode
+ *
+ */
+static int vop2_get_cluster_lb_mode(struct vop2_win *win, struct drm_plane_state *pstate)
+{
+	if ((pstate->rotation & DRM_MODE_ROTATE_270) || (pstate->rotation & DRM_MODE_ROTATE_90))
+		return 2;
+	else
+		return 0;
+}
+
+static uint16_t vop2_scale_factor(uint32_t src, uint32_t dst)
+{
+	uint32_t fac;
+	int shift;
+
+	if (src == dst)
+		return 0;
+
+	if (dst < 2)
+		return U16_MAX;
+
+	if (src < 2)
+		return 0;
+
+	if (src > dst)
+		shift = 12;
+	else
+		shift = 16;
+
+	src--;
+	dst--;
+
+	fac = DIV_ROUND_UP(src << shift, dst) - 1;
+
+	if (fac > U16_MAX)
+		return U16_MAX;
+
+	return fac;
+}
+
+static void vop2_setup_scale(struct vop2 *vop2, const struct vop2_win *win,
+			     uint32_t src_w, uint32_t src_h, uint32_t dst_w,
+			     uint32_t dst_h, uint32_t pixel_format)
+{
+	const struct drm_format_info *info;
+	uint16_t hor_scl_mode, ver_scl_mode;
+	uint16_t hscl_filter_mode, vscl_filter_mode;
+	uint8_t gt2 = 0;
+	uint8_t gt4 = 0;
+	uint32_t val;
+
+	info = drm_format_info(pixel_format);
+
+	if (src_h >= (4 * dst_h)) {
+		gt4 = 1;
+		src_h >>= 2;
+	} else if (src_h >= (2 * dst_h)) {
+		gt2 = 1;
+		src_h >>= 1;
+	}
+
+	hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+	ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+	if (hor_scl_mode == SCALE_UP)
+		hscl_filter_mode = VOP2_SCALE_UP_BIC;
+	else
+		hscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	if (ver_scl_mode == SCALE_UP)
+		vscl_filter_mode = VOP2_SCALE_UP_BIL;
+	else
+		vscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	/*
+	 * RK3568 VOP Esmart/Smart dsp_w should be even pixel
+	 * at scale down mode
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if ((hor_scl_mode == SCALE_DOWN) && (dst_w & 0x1)) {
+			drm_dbg(vop2->drm, "%s dst_w[%d] should align as 2 pixel\n",
+				win->data->name, dst_w);
+			dst_w++;
+		}
+	}
+
+	val = vop2_scale_factor(src_w, dst_w);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_X, val);
+	val = vop2_scale_factor(src_h, dst_h);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_Y, val);
+
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT4, gt4);
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT2, gt2);
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HOR_SCL_MODE, hor_scl_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VER_SCL_MODE, ver_scl_mode);
+
+	if (vop2_cluster_window(win))
+		return;
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HSCL_FILTER_MODE, hscl_filter_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VSCL_FILTER_MODE, vscl_filter_mode);
+
+	if (info->is_yuv) {
+		src_w /= info->hsub;
+		src_h /= info->vsub;
+
+		gt4 = gt2 = 0;
+
+		if (src_h >= (4 * dst_h)) {
+			gt4 = 1;
+			src_h >>= 2;
+		} else if (src_h >= (2 * dst_h)) {
+			gt2 = 1;
+			src_h >>= 1;
+		}
+
+		hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+		ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+		val = vop2_scale_factor(src_w, dst_w);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_X, val);
+
+		val = vop2_scale_factor(src_h, dst_h);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_Y, val);
+
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT4, gt4);
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT2, gt2);
+		vop2_win_write(win, VOP2_WIN_CBCR_HOR_SCL_MODE, hor_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VER_SCL_MODE, ver_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_HSCL_FILTER_MODE, hscl_filter_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VSCL_FILTER_MODE, vscl_filter_mode);
+	}
+}
+
+static int vop2_convert_csc_mode(int csc_mode)
+{
+	switch (csc_mode) {
+	case V4L2_COLORSPACE_SMPTE170M:
+	case V4L2_COLORSPACE_470_SYSTEM_M:
+	case V4L2_COLORSPACE_470_SYSTEM_BG:
+		return CSC_BT601L;
+	case V4L2_COLORSPACE_REC709:
+	case V4L2_COLORSPACE_SMPTE240M:
+	case V4L2_COLORSPACE_DEFAULT:
+		return CSC_BT709L;
+	case V4L2_COLORSPACE_JPEG:
+		return CSC_BT601F;
+	case V4L2_COLORSPACE_BT2020:
+		return CSC_BT2020;
+	default:
+		return CSC_BT709L;
+	}
+}
+
+/*
+ * colorspace path:
+ *      Input        Win csc                     Output
+ * 1. YUV(2020)  --> Y2R->2020To709->R2Y   --> YUV_OUTPUT(601/709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 2. YUV(2020)  --> bypasss               --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 3. YUV(2020)  --> Y2R->2020To709        --> RGB_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 4. YUV(601/709)-> Y2R->709To2020->R2Y   --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 5. YUV(601/709)-> bypass                --> YUV_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 6. YUV(601/709)-> bypass                --> YUV_OUTPUT(601)
+ *    RGB        --> R2Y(601)             __/
+ *
+ * 7. YUV        --> Y2R(709)              --> RGB_OUTPUT(709)
+ *    RGB        --> bypass               __/
+ *
+ * 8. RGB        --> 709To2020->R2Y        --> YUV_OUTPUT(2020)
+ *
+ * 9. RGB        --> R2Y(709)              --> YUV_OUTPUT(709)
+ *
+ * 10. RGB       --> R2Y(601)              --> YUV_OUTPUT(601)
+ *
+ * 11. RGB       --> bypass                --> RGB_OUTPUT(709)
+ */
+
+static void vop2_setup_csc_mode(struct vop2_video_port *vp,
+				struct vop2_win *win,
+				struct drm_plane_state *pstate)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(vp->crtc.state);
+	int is_input_yuv = pstate->fb->format->is_yuv;
+	int is_output_yuv = is_yuv_output(vcstate->bus_format);
+	int input_csc = V4L2_COLORSPACE_DEFAULT;
+	int output_csc = vcstate->color_space;
+	bool r2y_en, y2r_en;
+	int csc_mode;
+
+	if (is_input_yuv && !is_output_yuv) {
+		y2r_en = true;
+		r2y_en = false;
+		csc_mode = vop2_convert_csc_mode(input_csc);
+	} else if (!is_input_yuv && is_output_yuv) {
+		y2r_en = false;
+		r2y_en = true;
+		csc_mode = vop2_convert_csc_mode(output_csc);
+	} else {
+		y2r_en = false;
+		r2y_en = false;
+		csc_mode = false;
+	}
+
+	vop2_win_write(win, VOP2_WIN_Y2R_EN, y2r_en);
+	vop2_win_write(win, VOP2_WIN_R2Y_EN, r2y_en);
+	vop2_win_write(win, VOP2_WIN_CSC_MODE, csc_mode);
+}
+
+static void vop2_crtc_enable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irq << 16 | irq);
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16 | irq);
+}
+
+static void vop2_crtc_disable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16);
+}
+
+static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = clk_prepare_enable(vop2->hclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable hclk - %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(vop2->aclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable aclk - %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	clk_disable_unprepare(vop2->hclk);
+
+	return ret;
+}
+
+static void vop2_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(vop2->dev);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to get pm runtime: %d\n", ret);
+		return;
+	}
+
+	ret = vop2_core_clks_prepare_enable(vop2);
+	if (ret) {
+		pm_runtime_put_sync(vop2->dev);
+		return;
+	}
+
+	if (vop2->data->soc_id == 3566)
+		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
+
+	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+
+	/*
+	 * Disable auto gating, this is a workaround to
+	 * avoid display image shift when a window enabled.
+	 */
+	regmap_clear_bits(vop2->map, RK3568_SYS_AUTO_GATING_CTRL,
+			  RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN);
+
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS0_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+}
+
+static void vop2_disable(struct vop2 *vop2)
+{
+	pm_runtime_put_sync(vop2->dev);
+
+	clk_disable_unprepare(vop2->aclk);
+	clk_disable_unprepare(vop2->hclk);
+}
+
+static void vop2_crtc_atomic_disable(struct drm_crtc *crtc,
+				     struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	int ret;
+
+	vop2_lock(vop2);
+
+	drm_crtc_vblank_off(crtc);
+
+	/*
+	 * Vop standby will take effect at end of current frame,
+	 * if dsp hold valid irq happen, it means standby complete.
+	 *
+	 * we must wait standby complete when we want to disable aclk,
+	 * if not, memory bus maybe dead.
+	 */
+	reinit_completion(&vp->dsp_hold_completion);
+
+	vop2_crtc_enable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, RK3568_VP_DSP_CTRL__STANDBY);
+
+	ret = wait_for_completion_timeout(&vp->dsp_hold_completion, msecs_to_jiffies(50));
+	if (!ret)
+		drm_info(vop2->drm, "wait for vp%d dsp_hold timeout\n", vp->id);
+
+	vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	clk_disable_unprepare(vp->dclk);
+
+	vop2->enable_count--;
+
+	if (!vop2->enable_count)
+		vop2_disable(vop2);
+
+	vop2_unlock(vop2);
+
+	if (crtc->state->event && !crtc->state->active) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+
+		crtc->state->event = NULL;
+	}
+}
+
+static int vop2_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *astate)
+{
+	struct drm_plane_state *pstate = drm_atomic_get_new_plane_state(astate, plane);
+	struct drm_framebuffer *fb = pstate->fb;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct drm_crtc_state *cstate;
+	struct vop2_video_port *vp;
+	struct vop2 *vop2;
+	const struct vop2_data *vop2_data;
+	struct drm_rect *dest = &pstate->dst;
+	struct drm_rect *src = &pstate->src;
+	int min_scale = FRAC_16_16(1, 8);
+	int max_scale = FRAC_16_16(8, 1);
+	int format;
+	int ret;
+
+	if (!crtc)
+		return 0;
+
+	vp = to_vop2_video_port(crtc);
+	vop2 = vp->vop2;
+	vop2_data = vop2->data;
+
+	cstate = drm_atomic_get_existing_crtc_state(pstate->state, crtc);
+	if (WARN_ON(!cstate))
+		return -EINVAL;
+
+	ret = drm_atomic_helper_check_plane_state(pstate, cstate,
+						  min_scale, max_scale,
+						  true, true);
+	if (ret)
+		return ret;
+
+	if (!pstate->visible)
+		return 0;
+
+	format = vop2_convert_format(fb->format->format);
+	if (format < 0)
+		return format;
+
+	if (drm_rect_width(src) >> 16 < 4 || drm_rect_height(src) >> 16 < 4 ||
+	    drm_rect_width(dest) < 4 || drm_rect_width(dest) < 4) {
+		drm_err(vop2->drm, "Invalid size: %dx%d->%dx%d, min size is 4x4\n",
+			  drm_rect_width(src) >> 16, drm_rect_height(src) >> 16,
+			  drm_rect_width(dest), drm_rect_height(dest));
+		pstate->visible = false;
+		return 0;
+	}
+
+	if (drm_rect_width(src) >> 16 > vop2_data->max_input.width ||
+	    drm_rect_height(src) >> 16 > vop2_data->max_input.height) {
+		drm_err(vop2->drm, "Invalid source: %dx%d. max input: %dx%d\n",
+			  drm_rect_width(src) >> 16,
+			  drm_rect_height(src) >> 16,
+			  vop2_data->max_input.width,
+			  vop2_data->max_input.height);
+		return -EINVAL;
+	}
+
+	/*
+	 * Src.x1 can be odd when do clip, but yuv plane start point
+	 * need align with 2 pixel.
+	 */
+	if (fb->format->is_yuv && ((pstate->src.x1 >> 16) % 2)) {
+		drm_err(vop2->drm, "Invalid Source: Yuv format not support odd xpos\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void vop2_plane_atomic_disable(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *old_pstate = drm_atomic_get_old_plane_state(state, plane);
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	drm_dbg(vop2->drm, "%s disable\n", win->data->name);
+
+	if (!old_pstate->crtc)
+		return;
+
+	vop2_win_disable(win);
+	vop2_win_write(win, VOP2_WIN_YUV_CLIP, 0);
+}
+
+/*
+ * The color key is 10 bit, so all format should
+ * convert to 10 bit here.
+ */
+static void vop2_plane_setup_color_key(struct drm_plane *plane, uint32_t color_key)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_framebuffer *fb = pstate->fb;
+	struct vop2_win *win = to_vop2_win(plane);
+	uint32_t color_key_en = 0;
+	uint32_t r = 0;
+	uint32_t g = 0;
+	uint32_t b = 0;
+
+	if (!(color_key & VOP2_COLOR_KEY_MASK) || fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, 0);
+		return;
+	}
+
+	switch (fb->format->format) {
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		r = (color_key & 0xf800) >> 11;
+		g = (color_key & 0x7e0) >> 5;
+		b = (color_key & 0x1f);
+		r <<= 5;
+		g <<= 4;
+		b <<= 5;
+		color_key_en = 1;
+		break;
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		r = (color_key & 0xff0000) >> 16;
+		g = (color_key & 0xff00) >> 8;
+		b = (color_key & 0xff);
+		r <<= 2;
+		g <<= 2;
+		b <<= 2;
+		color_key_en = 1;
+		break;
+	}
+
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, color_key_en);
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY, (r << 20) | (g << 10) | b);
+}
+
+static void vop2_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
+	struct vop2 *vop2 = win->vop2;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t actual_w, actual_h, dsp_w, dsp_h;
+	uint32_t act_info, dsp_info;
+	uint32_t format;
+	uint32_t afbc_format;
+	uint32_t rb_swap;
+	uint32_t uv_swap;
+	struct drm_rect *src = &pstate->src;
+	struct drm_rect *dest = &pstate->dst;
+	uint32_t afbc_tile_num;
+	uint32_t transform_offset;
+	bool dither_up;
+	bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
+	bool ymirror = pstate->rotation & DRM_MODE_REFLECT_Y;
+	bool rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
+	bool rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
+	struct rockchip_gem_object *rk_obj;
+	unsigned long offset;
+	bool afbc_en;
+	dma_addr_t yrgb_mst;
+	dma_addr_t uv_mst;
+
+	/*
+	 * can't update plane when vop2 is disabled.
+	 */
+	if (WARN_ON(!crtc))
+		return;
+
+	if (!pstate->visible) {
+		vop2_plane_atomic_disable(plane, state);
+		return;
+	}
+
+	afbc_en = rockchip_afbc(plane, fb->modifier);
+
+	offset = (src->x1 >> 16) * fb->format->cpp[0];
+
+	/*
+	 * AFBC HDR_PTR must set to the zero offset of the framebuffer.
+	 */
+	if (afbc_en)
+		offset = 0;
+	else if (pstate->rotation & DRM_MODE_REFLECT_Y)
+		offset += ((src->y2 >> 16) - 1) * fb->pitches[0];
+	else
+		offset += (src->y1 >> 16) * fb->pitches[0];
+
+	rk_obj = to_rockchip_obj(fb->obj[0]);
+
+	yrgb_mst = rk_obj->dma_addr + offset + fb->offsets[0];
+	if (fb->format->is_yuv) {
+		int hsub = fb->format->hsub;
+		int vsub = fb->format->vsub;
+
+		offset = (src->x1 >> 16) * fb->format->cpp[1] / hsub;
+		offset += (src->y1 >> 16) * fb->pitches[1] / vsub;
+
+		if ((pstate->rotation & DRM_MODE_REFLECT_Y) && !afbc_en)
+			offset += fb->pitches[1] * ((pstate->src_h >> 16) - 2)  / vsub;
+
+		rk_obj = to_rockchip_obj(fb->obj[0]);
+		uv_mst = rk_obj->dma_addr + offset + fb->offsets[1];
+	}
+
+	actual_w = drm_rect_width(src) >> 16;
+	actual_h = drm_rect_height(src) >> 16;
+	dsp_w = drm_rect_width(dest);
+
+	if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
+			  vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
+		dsp_w = adjusted_mode->hdisplay - dest->x1;
+		if (dsp_w < 4)
+			dsp_w = 4;
+		actual_w = dsp_w * actual_w / drm_rect_width(dest);
+	}
+
+	dsp_h = drm_rect_height(dest);
+
+	if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
+			  vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
+		dsp_h = adjusted_mode->vdisplay - dest->y1;
+		if (dsp_h < 4)
+			dsp_h = 4;
+		actual_h = dsp_h * actual_h / drm_rect_height(dest);
+	}
+
+	/*
+	 * This is workaround solution for IC design:
+	 * esmart can't support scale down when actual_w % 16 == 1.
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if (actual_w > dsp_w && (actual_w & 0xf) == 1) {
+			drm_err(vop2->drm, "vp%d %s act_w[%d] MODE 16 == 1\n", vp->id, win->data->name, actual_w);
+			actual_w -= 1;
+		}
+	}
+
+	if (afbc_en && actual_w % 4) {
+		drm_err(vop2->drm, "vp%d %s actual_w[%d] should align as 4 pixel when enable afbc\n",
+			  vp->id, win->data->name, actual_w);
+		actual_w = ALIGN_DOWN(actual_w, 4);
+	}
+
+	act_info = (actual_h - 1) << 16 | ((actual_w - 1) & 0xffff);
+	dsp_info = (dsp_h - 1) << 16 | ((dsp_w - 1) & 0xffff);
+
+	format = vop2_convert_format(fb->format->format);
+
+	drm_dbg(vop2->drm, "vp%d update %s[%dx%d->%dx%d@%dx%d] fmt[%p4cc_%s] addr[%pad]\n",
+		      vp->id, win->data->name, actual_w, actual_h, dsp_w, dsp_h,
+		      dest->x1, dest->y1,
+		      &fb->format->format,
+		      afbc_en ? "AFBC" : "", &yrgb_mst);
+
+	if (afbc_en) {
+		uint32_t stride;
+
+		/* the afbc superblock is 16 x 16 */
+		afbc_format = vop2_convert_afbc_format(fb->format->format);
+
+		/* Enable color transform for YTR */
+		if (fb->modifier & AFBC_FORMAT_MOD_YTR)
+			afbc_format |= (1 << 4);
+
+		afbc_tile_num = ALIGN(actual_w, 16) >> 4;
+
+		/*
+		 * AFBC pic_vir_width is count by pixel, this is different
+		 * with WIN_VIR_STRIDE.
+		 */
+		stride = (fb->pitches[0] << 3) / bpp;
+		if ((stride & 0x3f) && (xmirror || rotate_90 || rotate_270))
+			drm_err(vop2->drm, "vp%d %s stride[%d] must align as 64 pixel when enable xmirror/rotate_90/rotate_270[0x%x]\n",
+				  vp->id, win->data->name, stride, pstate->rotation);
+
+		rb_swap = vop2_afbc_rb_swap(fb->format->format);
+		uv_swap = vop2_afbc_uv_swap(fb->format->format);
+		/*
+		 * This is a workaround for crazy IC design, Cluster
+		 * and Esmart/Smart use different format configuration map:
+		 * YUV420_10BIT: 0x10 for Cluster, 0x14 for Esmart/Smart.
+		 *
+		 * This is one thing we can make the convert simple:
+		 * AFBCD decode all the YUV data to YUV444. So we just
+		 * set all the yuv 10 bit to YUV444_10.
+		 */
+		if (fb->format->is_yuv && (bpp == 10))
+			format = VOP2_CLUSTER_YUV444_10;
+
+		if (vop2_cluster_window(win))
+			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
+		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
+		vop2_win_write(win, VOP2_WIN_AFBC_RB_SWAP, rb_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
+		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
+		if (pstate->rotation & (DRM_MODE_ROTATE_270 | DRM_MODE_ROTATE_90)) {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 0);
+			transform_offset = vop2_afbc_transform_offset(pstate, false);
+		} else {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 1);
+			transform_offset = vop2_afbc_transform_offset(pstate, true);
+		}
+		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_SIZE, act_info);
+		vop2_win_write(win, VOP2_WIN_AFBC_TRANSFORM_OFFSET, transform_offset);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_OFFSET, ((src->x1 >> 16) | src->y1));
+		vop2_win_write(win, VOP2_WIN_AFBC_DSP_OFFSET, (dest->x1 | (dest->y1 << 16)));
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_VIR_WIDTH, stride);
+		vop2_win_write(win, VOP2_WIN_AFBC_TILE_NUM, afbc_tile_num);
+		vop2_win_write(win, VOP2_WIN_XMIRROR, xmirror);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_270, rotate_270);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_90, rotate_90);
+	} else {
+		vop2_win_write(win, VOP2_WIN_YRGB_VIR, DIV_ROUND_UP(fb->pitches[0], 4));
+	}
+
+	vop2_win_write(win, VOP2_WIN_YMIRROR, ymirror);
+
+	if (rotate_90 || rotate_270) {
+		act_info = swahw32(act_info);
+		actual_w = drm_rect_height(src) >> 16;
+		actual_h = drm_rect_width(src) >> 16;
+	}
+
+	vop2_win_write(win, VOP2_WIN_FORMAT, format);
+	vop2_win_write(win, VOP2_WIN_YRGB_MST, yrgb_mst);
+
+	rb_swap = vop2_win_rb_swap(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_RB_SWAP, rb_swap);
+	if (!vop2_cluster_window(win)) {
+		uv_swap = vop2_win_uv_swap(fb->format->format);
+		vop2_win_write(win, VOP2_WIN_UV_SWAP, uv_swap);
+	}
+
+	if (fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_UV_VIR, DIV_ROUND_UP(fb->pitches[1], 4));
+		vop2_win_write(win, VOP2_WIN_UV_MST, uv_mst);
+	}
+
+	vop2_setup_scale(vop2, win, actual_w, actual_h, dsp_w, dsp_h, fb->format->format);
+	if (!vop2_cluster_window(win))
+		vop2_plane_setup_color_key(plane, 0);
+	vop2_win_write(win, VOP2_WIN_ACT_INFO, act_info);
+	vop2_win_write(win, VOP2_WIN_DSP_INFO, dsp_info);
+	vop2_win_write(win, VOP2_WIN_DSP_ST, dest->y1 << 16 | (dest->x1 & 0xffff));
+
+	vop2_setup_csc_mode(vp, win, pstate);
+
+	dither_up = vop2_win_dither_up(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_DITHER_UP, dither_up);
+
+	vop2_win_write(win, VOP2_WIN_ENABLE, 1);
+
+	if (vop2_cluster_window(win)) {
+		int lb_mode = vop2_get_cluster_lb_mode(win, pstate);
+
+		vop2_win_write(win, VOP2_WIN_CLUSTER_LB_MODE, lb_mode);
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 1);
+	}
+}
+
+static const struct drm_plane_helper_funcs vop2_plane_helper_funcs = {
+	.atomic_check = vop2_plane_atomic_check,
+	.atomic_update = vop2_plane_atomic_update,
+	.atomic_disable = vop2_plane_atomic_disable,
+};
+
+static const struct drm_plane_funcs vop2_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy = drm_plane_cleanup,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+	.format_mod_supported = rockchip_vop2_mod_supported,
+};
+
+static int vop2_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_enable_irq(vp, VP_INT_FS_FIELD);
+
+	return 0;
+}
+
+static void vop2_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_disable_irq(vp, VP_INT_FS_FIELD);
+}
+
+static bool vop2_crtc_mode_fixup(struct drm_crtc *crtc,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj_mode)
+{
+	drm_mode_set_crtcinfo(adj_mode, CRTC_INTERLACE_HALVE_V | CRTC_STEREO_DOUBLE);
+
+	return true;
+}
+
+static void vop2_dither_setup(struct drm_crtc *crtc, uint32_t *dsp_ctrl)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	switch (vcstate->bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		*dsp_ctrl |= RGB888_TO_RGB666;
+		break;
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+		break;
+	default:
+		break;
+	}
+
+	if (vcstate->output_mode != ROCKCHIP_OUT_MODE_AAAA)
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+
+	*dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL,
+				DITHER_DOWN_ALLEGRO);
+}
+
+static void vop2_post_config(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint32_t left_margin = 100, right_margin = 100, top_margin = 100, bottom_margin = 100;
+	uint16_t hsize = hdisplay * (left_margin + right_margin) / 200;
+	uint16_t vsize = vdisplay * (top_margin + bottom_margin) / 200;
+	uint16_t hact_end, vact_end;
+	uint32_t val;
+
+	vsize = rounddown(vsize, 2);
+	hsize = rounddown(hsize, 2);
+	hact_st += hdisplay * (100 - left_margin) / 200;
+	hact_end = hact_st + hsize;
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_HACT_INFO, val);
+	vact_st += vdisplay * (100 - top_margin) / 200;
+	vact_end = vact_st + vsize;
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO, val);
+	val = scl_cal_scale2(vdisplay, vsize) << 16;
+	val |= scl_cal_scale2(hdisplay, hsize);
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_FACTOR_YRGB, val);
+
+	val = 0;
+	if (hdisplay != hsize)
+		val |= RK3568_VP_POST_SCL_CTRL__HSCALEDOWN;
+	if (vdisplay != vsize)
+		val |= RK3568_VP_POST_SCL_CTRL__VSCALEDOWN;
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_CTRL, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vsize;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO_F1, val);
+	}
+
+	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
+}
+
+static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
+				uint32_t polflags)
+{
+	struct vop2 *vop2 = vp->vop2;
+	uint32_t die, dip;
+
+	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
+	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
+
+	switch (id) {
+	case RK3568_VOP2_EP_RGB:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_RGB_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_RGB |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_RGB_MUX, vp->id);
+		if (polflags & POLFLAG_DCLK_INV)
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16) | BIT(3));
+		else
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16));
+		break;
+	case RK3568_VOP2_EP_HDMI:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_HDMI_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_HDMI |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_HDMI_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_EDP:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_EDP_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_EDP |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_EDP_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_MIPI0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_MIPI1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	default:
+		return;
+	};
+
+	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
+
+	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
+	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
+}
+
+static int us_to_vertical_line(struct drm_display_mode *mode, int us)
+{
+	return us * mode->clock / mode->htotal / 1000;
+}
+
+static void vop2_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	const struct vop2_data *vop2_data = vop2->data;
+	const struct vop2_video_port_data *vp_data = &vop2_data->vp[vp->id];
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	unsigned long clock = mode->crtc_clock * 1000;
+	uint16_t hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t htotal = mode->crtc_htotal;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t hact_end = hact_st + hdisplay;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint16_t vact_end = vact_st + vdisplay;
+	uint8_t out_mode;
+	uint32_t dsp_ctrl = 0;
+	int act_end;
+	uint32_t val, polflags;
+	int ret;
+	struct drm_encoder *encoder;
+
+	drm_dbg(vop2->drm, "Update mode to %dx%d%s%d, type: %d for vp%d\n",
+		hdisplay, vdisplay, mode->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "p",
+		drm_mode_vrefresh(mode), vcstate->output_type, vp->id);
+
+	vop2_lock(vop2);
+
+	ret = clk_prepare_enable(vp->dclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable dclk for video port%d - %d\n",
+			      vp->id, ret);
+		return;
+	}
+
+	if (!vop2->enable_count)
+		vop2_enable(vop2);
+
+	vop2->enable_count++;
+
+	vop2_crtc_enable_irq(vp, VP_INT_POST_BUF_EMPTY);
+
+	polflags = 0;
+	if (vcstate->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+		polflags |= POLFLAG_DCLK_INV;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		polflags |= BIT(HSYNC_POSITIVE);
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		polflags |= BIT(VSYNC_POSITIVE);
+
+	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
+		struct device_node *node, *parent;
+
+		parent = of_get_parent(encoder->port);
+
+		for_each_endpoint_of_node(parent, node) {
+			struct device_node *crtc_port = of_graph_get_remote_port(node);
+			struct device_node *epn;
+			struct of_endpoint endpoint;
+
+			if (crtc->port != crtc_port) {
+				of_node_put(crtc_port);
+				continue;
+			}
+
+			of_node_put(crtc_port);
+
+			epn = of_graph_get_remote_endpoint(node);
+			of_graph_parse_endpoint(epn, &endpoint);
+			of_node_put(epn);
+
+			drm_dbg(vop2->drm, "vp%d is connected to %s, id %d\n",
+					   vp->id, encoder->name, endpoint.id);
+			rk3568_set_intf_mux(vp, endpoint.id, polflags);
+		}
+		of_node_put(parent);
+	}
+
+	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
+	     !(vp_data->feature & VOP_FEATURE_OUTPUT_10BIT))
+		out_mode = ROCKCHIP_OUT_MODE_P888;
+	else
+		out_mode = vcstate->output_mode;
+
+	dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__OUT_MODE, out_mode);
+
+	if (vop2_output_uv_swap(vcstate->bus_format, vcstate->output_mode))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_RB_SWAP;
+
+	if (is_yuv_output(vcstate->bus_format))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y;
+
+	vop2_dither_setup(crtc, &dsp_ctrl);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_HTOTAL_HS_END, (htotal << 16) | hsync_len);
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_HACT_ST_END, val);
+
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vdisplay;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END_F1, val);
+
+		val = vtotal << 16 | (vtotal + vsync_len);
+		vop2_vp_write(vp, RK3568_VP_DSP_VS_ST_END_F1, val);
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_INTERLACE;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_FILED_POL;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__P2I_EN;
+		vtotal += vtotal + 1;
+		act_end = vact_end_f1;
+	} else {
+		act_end = vact_end;
+	}
+
+	vop2_writel(vop2, RK3568_VP_LINE_FLAG(vp->id),
+		    (act_end - us_to_vertical_line(mode, 0)) << 16 | act_end);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_VTOTAL_VS_END, vtotal << 16 | vsync_len);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__CORE_DCLK_DIV;
+		clock *= 2;
+	}
+
+	vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0);
+
+	clk_set_rate(vp->dclk, clock);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
+
+	drm_crtc_vblank_on(crtc);
+
+	vop2_unlock(vop2);
+}
+
+static int vop2_crtc_atomic_check(struct drm_crtc *crtc,
+				  struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_plane *plane;
+	int nplanes = 0;
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+	drm_atomic_crtc_state_for_each_plane(plane, crtc_state)
+		nplanes++;
+
+	if (nplanes > vp->nlayers)
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool is_opaque(uint16_t alpha)
+{
+	return (alpha >> 8) == 0xff;
+}
+
+static void vop2_parse_alpha(struct vop2_alpha_config *alpha_config,
+			     struct vop2_alpha *alpha)
+{
+	int src_glb_alpha_en = is_opaque(alpha_config->src_glb_alpha_value) ? 0 : 1;
+	int dst_glb_alpha_en = is_opaque(alpha_config->dst_glb_alpha_value) ? 0 : 1;
+	int src_color_mode = alpha_config->src_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+	int dst_color_mode = alpha_config->dst_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+
+	alpha->src_color_ctrl.val = 0;
+	alpha->dst_color_ctrl.val = 0;
+	alpha->src_alpha_ctrl.val = 0;
+	alpha->dst_alpha_ctrl.val = 0;
+
+	if (!alpha_config->src_pixel_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	else if (alpha_config->src_pixel_alpha_en && !src_glb_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+
+	alpha->src_color_ctrl.bits.alpha_en = 1;
+
+	if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_GLOBAL) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	} else if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_PER_PIX) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_ONE;
+	} else {
+		alpha->src_color_ctrl.bits.color_mode = ALPHA_SRC_PRE_MUL;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	}
+	alpha->src_color_ctrl.bits.glb_alpha = alpha_config->src_glb_alpha_value >> 8;
+	alpha->src_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+
+	alpha->dst_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->dst_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->dst_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	alpha->dst_color_ctrl.bits.glb_alpha = alpha_config->dst_glb_alpha_value >> 8;
+	alpha->dst_color_ctrl.bits.color_mode = dst_color_mode;
+	alpha->dst_color_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+
+	alpha->src_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_alpha_ctrl.bits.blend_mode = alpha->src_color_ctrl.bits.blend_mode;
+	alpha->src_alpha_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->src_alpha_ctrl.bits.factor_mode = ALPHA_ONE;
+
+	alpha->dst_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	if (alpha_config->dst_pixel_alpha_en && !dst_glb_alpha_en)
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+	alpha->dst_alpha_ctrl.bits.alpha_cal_mode = ALPHA_NO_SATURATION;
+	alpha->dst_alpha_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+}
+
+static int vop2_find_start_mixer_id_for_vp(struct vop2 *vop2, uint8_t port_id)
+{
+	struct vop2_video_port *vp;
+	int used_layer = 0;
+	int i;
+
+	for (i = 0; i < port_id; i++) {
+		vp = &vop2->vps[i];
+		used_layer += hweight32(vp->win_mask);
+	}
+
+	return used_layer;
+}
+
+static void vop2_setup_cluster_alpha(struct vop2 *vop2, struct vop2_win *main_win)
+{
+	uint32_t offset = (main_win->data->phys_id * 0x10);
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane_state *bottom_win_pstate;
+	bool src_pixel_alpha_en = false;
+	uint16_t src_glb_alpha_val, dst_glb_alpha_val;
+	bool premulti_en = false;
+	bool swap = false;
+
+	/* At one win mode, win0 is dst/bottom win, and win1 is a all zero src/top win */
+	bottom_win_pstate = main_win->base.state;
+	src_glb_alpha_val = 0;
+	dst_glb_alpha_val = main_win->base.state->alpha;
+
+	if (!bottom_win_pstate->fb)
+		return;
+
+	alpha_config.src_premulti_en = premulti_en;
+	alpha_config.dst_premulti_en = false;
+	alpha_config.src_pixel_alpha_en = src_pixel_alpha_en;
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+	alpha_config.src_glb_alpha_value = src_glb_alpha_val;
+	alpha_config.dst_glb_alpha_value = dst_glb_alpha_val;
+	vop2_parse_alpha(&alpha_config, &alpha);
+
+	alpha.src_color_ctrl.bits.src_dst_swap = swap;
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL + offset,
+		    alpha.src_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_COLOR_CTRL + offset,
+		    alpha.dst_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL + offset,
+		    alpha.src_alpha_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL + offset,
+		    alpha.dst_alpha_ctrl.val);
+}
+
+static void vop2_setup_alpha(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_framebuffer *fb;
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane *plane;
+	int pixel_alpha_en;
+	int premulti_en, gpremulti_en = 0;
+	int mixer_id;
+	uint32_t offset;
+	bool bottom_layer_alpha_en = false;
+	uint32_t dst_global_alpha = DRM_BLEND_ALPHA_OPAQUE;
+
+	mixer_id = vop2_find_start_mixer_id_for_vp(vop2, vp->id);
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		if (plane->state->normalized_zpos == 0 &&
+		    !is_opaque(plane->state->alpha) &&
+		    !vop2_cluster_window(win)) {
+			/*
+			 * If bottom layer have global alpha effect [except cluster layer,
+			 * because cluster have deal with bottom layer global alpha value
+			 * at cluster mix], bottom layer mix need deal with global alpha.
+			 */
+			bottom_layer_alpha_en = true;
+			dst_global_alpha = plane->state->alpha;
+		}
+	}
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+		int zpos = plane->state->normalized_zpos;
+
+		if (plane->state->pixel_blend_mode == DRM_MODE_BLEND_PREMULTI)
+			premulti_en = 1;
+		else
+			premulti_en = 0;
+
+		plane = &win->base;
+		fb = plane->state->fb;
+
+		pixel_alpha_en = fb->format->has_alpha;
+
+		alpha_config.src_premulti_en = premulti_en;
+
+		if (bottom_layer_alpha_en && zpos == 1) {
+			gpremulti_en = premulti_en;
+			/* Cd = Cs + (1 - As) * Cd * Agd */
+			alpha_config.dst_premulti_en = false;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = dst_global_alpha;
+		} else if (vop2_cluster_window(win)) {
+			/* Mix output data only have pixel alpha */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		} else {
+			/* Cd = Cs + (1 - As) * Cd */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		}
+
+		vop2_parse_alpha(&alpha_config, &alpha);
+
+		offset = (mixer_id + zpos - 1) * 0x10;
+		vop2_writel(vop2, RK3568_MIX0_SRC_COLOR_CTRL + offset,
+			    alpha.src_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_COLOR_CTRL + offset,
+			    alpha.dst_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_SRC_ALPHA_CTRL + offset,
+			    alpha.src_alpha_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_ALPHA_CTRL + offset,
+			    alpha.dst_alpha_ctrl.val);
+	}
+
+	if (vp->id == 0) {
+		if (bottom_layer_alpha_en) {
+			/* Transfer pixel alpha to hdr mix */
+			alpha_config.src_premulti_en = gpremulti_en;
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			vop2_parse_alpha(&alpha_config, &alpha);
+
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL,
+				alpha.src_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_COLOR_CTRL,
+				alpha.dst_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_SRC_ALPHA_CTRL,
+				alpha.src_alpha_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_ALPHA_CTRL,
+				alpha.dst_alpha_ctrl.val);
+		} else {
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL, 0);
+		}
+	}
+}
+
+#define NR_VPS		3
+#define NR_MIXERS	6
+
+static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+	uint32_t layer_sel = 0;
+	uint32_t port_sel;
+	int nlayer, ofs;
+	struct drm_display_mode *adjusted_mode;
+	uint16_t hsync_len;
+	uint16_t hdisplay;
+	uint32_t bg_dly;
+	uint32_t pre_scan_dly;
+	int i;
+	struct vop2_video_port *vp0 = &vop2->vps[0];
+	struct vop2_video_port *vp1 = &vop2->vps[1];
+	struct vop2_video_port *vp2 = &vop2->vps[2];
+
+	adjusted_mode = &vp->crtc.state->adjusted_mode;
+	hsync_len = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
+	hdisplay = adjusted_mode->crtc_hdisplay;
+
+	bg_dly = vp->data->pre_scan_max_dly[3];
+	vop2_writel(vop2, RK3568_VP_BG_MIX_CTRL(vp->id),
+			    FIELD_PREP(RK3568_VP_BG_MIX_CTRL__BG_DLY, bg_dly));
+
+	pre_scan_dly = ((bg_dly + (hdisplay >> 1) - 1) << 16) | hsync_len;
+	vop2_vp_write(vp, RK3568_VP_PRE_SCAN_HTIMING, pre_scan_dly);
+
+	vop2_writel(vop2, RK3568_OVL_CTRL, 0);
+	port_sel = vop2_readl(vop2, RK3568_OVL_PORT_SEL);
+	port_sel &= RK3568_OVL_PORT_SEL__SEL_PORT;
+
+	if (vp0->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX,
+				     vp0->nlayers - 1);
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX, 8);
+
+	if (vp1->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX,
+				     (vp0->nlayers + vp1->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	if (vp2->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT2_MUX,
+			(vp2->nlayers + vp1->nlayers + vp0->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	layer_sel = vop2_readl(vop2, RK3568_OVL_LAYER_SEL);
+
+	ofs = 0;
+	for (i = 0; i < vp->id; i++)
+		ofs += vop2->vps[i].nlayers;
+
+	nlayer = 0;
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART1, vp->id);
+			break;
+		}
+
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, win->data->layer_sel_id);
+		nlayer++;
+	}
+
+	/* configure unused layers to 0x5 (reserved) */
+	for (; nlayer < 3; nlayer++) {
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 5);
+	}
+
+	vop2_writel(vop2, RK3568_OVL_LAYER_SEL, layer_sel);
+	vop2_writel(vop2, RK3568_OVL_PORT_SEL, port_sel);
+	vop2_writel(vop2, RK3568_OVL_CTRL, RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD);
+}
+
+static void vop2_setup_dly_for_windows(struct vop2 *vop2)
+{
+	struct vop2_win *win;
+	int i = 0;
+	uint32_t cdly = 0, sdly = 0;
+
+	for (i = 0; i < vop2->data->win_size; i++) {
+		uint32_t dly;
+
+		win = &vop2->win[i];
+		dly = win->delay;
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_1, dly);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_1, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART0, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART0, dly);
+			break;
+		}
+	}
+
+	vop2_writel(vop2, RK3568_CLUSTER_DLY_NUM, cdly);
+	vop2_writel(vop2, RK3568_SMART_DLY_NUM, sdly);
+}
+
+static void vop2_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+
+	vp->win_mask = 0;
+
+	drm_atomic_crtc_for_each_plane(plane, crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		win->delay = win->data->dly[VOP2_DLY_MODE_DEFAULT];
+
+		vp->win_mask |= BIT(win->data->phys_id);
+
+		if (vop2_cluster_window(win))
+			vop2_setup_cluster_alpha(vop2, win);
+	}
+
+	if (!vp->win_mask)
+		return;
+
+	vop2_setup_layer_mixer(vp);
+	vop2_setup_alpha(vp);
+	vop2_setup_dly_for_windows(vop2);
+}
+
+static void vop2_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	spin_lock_irq(&crtc->dev->event_lock);
+
+	if (crtc->state->event) {
+		WARN_ON(drm_crtc_vblank_get(crtc));
+		vp->event = crtc->state->event;
+		crtc->state->event = NULL;
+	}
+
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_helper_funcs vop2_crtc_helper_funcs = {
+	.mode_fixup = vop2_crtc_mode_fixup,
+	.atomic_check = vop2_crtc_atomic_check,
+	.atomic_begin = vop2_crtc_atomic_begin,
+	.atomic_flush = vop2_crtc_atomic_flush,
+	.atomic_enable = vop2_crtc_atomic_enable,
+	.atomic_disable = vop2_crtc_atomic_disable,
+};
+
+static void vop2_crtc_reset(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	if (crtc->state) {
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
+		kfree(vcstate);
+	}
+
+	vcstate = kzalloc(sizeof(*vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return;
+
+	crtc->state = &vcstate->base;
+	crtc->state->crtc = crtc;
+}
+
+static struct drm_crtc_state *vop2_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate, *old_vcstate;
+
+	old_vcstate = to_rockchip_crtc_state(crtc->state);
+
+	vcstate = kmemdup(old_vcstate, sizeof(*old_vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &vcstate->base);
+
+	return &vcstate->base;
+}
+
+static void vop2_crtc_destroy_state(struct drm_crtc *crtc,
+				    struct drm_crtc_state *state)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(state);
+
+	__drm_atomic_helper_crtc_destroy_state(&vcstate->base);
+	kfree(vcstate);
+}
+
+static const struct drm_crtc_funcs vop2_crtc_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.destroy = drm_crtc_cleanup,
+	.reset = vop2_crtc_reset,
+	.atomic_duplicate_state = vop2_crtc_duplicate_state,
+	.atomic_destroy_state = vop2_crtc_destroy_state,
+	.enable_vblank = vop2_crtc_enable_vblank,
+	.disable_vblank = vop2_crtc_disable_vblank,
+};
+
+static irqreturn_t vop2_isr(int irq, void *data)
+{
+	struct vop2 *vop2 = data;
+	const struct vop2_data *vop2_data = vop2->data;
+	uint32_t axi_irqs[VOP2_SYS_AXI_BUS_NUM];
+	int ret = IRQ_NONE;
+	int i;
+
+	/*
+	 * The irq is shared with the iommu. If the runtime-pm state of the
+	 * vop2-device is disabled the irq has to be targeted at the iommu.
+	 */
+	if (!pm_runtime_get_if_in_use(vop2->dev))
+		return IRQ_NONE;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		struct drm_crtc *crtc = &vp->crtc;
+		uint32_t irqs;
+
+		irqs = vop2_readl(vop2, RK3568_VP_INT_STATUS(vp->id));
+		vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irqs << 16 | irqs);
+
+		if (irqs & VP_INT_DSP_HOLD_VALID) {
+			complete(&vp->dsp_hold_completion);
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_FS_FIELD) {
+			unsigned long flags;
+
+			drm_crtc_handle_vblank(crtc);
+			spin_lock_irqsave(&crtc->dev->event_lock, flags);
+			if (vp->event) {
+				uint32_t val = vop2_readl(vop2, RK3568_REG_CFG_DONE);
+				if (!(val & BIT(vp->id))) {
+					drm_crtc_send_vblank_event(crtc, vp->event);
+					vp->event = NULL;
+					drm_crtc_vblank_put(crtc);
+				}
+			}
+			spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_POST_BUF_EMPTY) {
+			drm_err_ratelimited(vop2->drm,
+					    "POST_BUF_EMPTY irq err at vp%d\n",
+					    vp->id);
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	axi_irqs[0] = vop2_readl(vop2, RK3568_SYS0_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR, axi_irqs[0] << 16 | axi_irqs[0]);
+	axi_irqs[1] = vop2_readl(vop2, RK3568_SYS1_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR, axi_irqs[1] << 16 | axi_irqs[1]);
+
+	for (i = 0; i < ARRAY_SIZE(axi_irqs); i++) {
+		if (axi_irqs[i] & VOP2_INT_BUS_ERRPR) {
+			drm_err_ratelimited(vop2->drm, "BUS_ERROR irq err\n");
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	pm_runtime_put(vop2->dev);
+
+	return ret;
+}
+
+static int vop2_plane_init(struct vop2 *vop2, struct vop2_win *win, unsigned long possible_crtcs)
+{
+	const struct vop2_win_data *win_data = win->data;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | BIT(DRM_MODE_BLEND_PREMULTI) |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
+	int ret;
+
+	ret = drm_universal_plane_init(vop2->drm, &win->base, possible_crtcs,
+				       &vop2_plane_funcs, win_data->formats, win_data->nformats,
+				       win_data->format_modifiers, win->type, win_data->name);
+	if (ret) {
+		drm_err(vop2->drm, "failed to initialize plane %d\n", ret);
+		return ret;
+	}
+
+	drm_plane_helper_add(&win->base, &vop2_plane_helper_funcs);
+
+	if (win->data->supported_rotations)
+		drm_plane_create_rotation_property(&win->base, DRM_MODE_ROTATE_0,
+						   DRM_MODE_ROTATE_0 |
+						   win->data->supported_rotations);
+	drm_plane_create_alpha_property(&win->base);
+	drm_plane_create_blend_mode_property(&win->base, blend_caps);
+	drm_plane_create_zpos_property(&win->base, win->win_id, 0,
+				       vop2->registered_num_wins - 1);
+
+	return 0;
+}
+
+static struct vop2_video_port *get_activated_vp(struct vop2 *vop2, int n)
+{
+	int i, id = 0;
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		if (n == id)
+			return vp;
+		id++;
+	}
+
+	return NULL;
+}
+
+static int vop2_create_crtc(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct drm_device *drm = vop2->drm;
+	struct device *dev = vop2->dev;
+	struct drm_plane *plane;
+	struct device_node *port;
+	struct vop2_video_port *vp;
+	uint32_t possible_crtcs;
+	int i, nvp, nvps = 0;
+	int ret;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		const struct vop2_video_port_data *vp_data;
+		struct device_node *np;
+		char dclk_name[9];
+
+		vp_data = &vop2_data->vp[i];
+		vp = &vop2->vps[i];
+		vp->vop2 = vop2;
+		vp->id = vp_data->id;
+		vp->regs = vp_data->regs;
+		vp->data = vp_data;
+
+		snprintf(dclk_name, sizeof(dclk_name), "dclk_vp%d", vp->id);
+		vp->dclk = devm_clk_get(vop2->dev, dclk_name);
+		if (IS_ERR(vp->dclk)) {
+			drm_err(vop2->drm, "failed to get %s\n", dclk_name);
+			return PTR_ERR(vp->dclk);
+		}
+
+		np = of_graph_get_remote_node(dev->of_node, i, -1);
+		if (!np) {
+			printk("%s: No remote for vp%d\n", __func__, i);
+			continue;
+		}
+		of_node_put(np);
+
+		port = of_graph_get_port_by_id(dev->of_node, i);
+		if (!port) {
+			drm_err(vop2->drm, "no port node found for video_port%d\n", i);
+			return -ENOENT;
+		}
+
+		vp->crtc.port = port;
+		nvps++;
+	}
+
+	nvp = 0;
+	for (i = 0; i < vop2->registered_num_wins; i++) {
+		struct vop2_win *win = &vop2->win[i];
+
+		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
+			vp = get_activated_vp(vop2, nvp);
+
+			if (vp) {
+				possible_crtcs = BIT(nvp);
+				vp->primary_plane = win;
+
+				nvp++;
+			} else {
+				/* change the unused primary window to overlay window */
+				win->type = DRM_PLANE_TYPE_OVERLAY;
+			}
+		}
+
+		if (win->type == DRM_PLANE_TYPE_OVERLAY)
+			possible_crtcs = (1 << vop2_data->nr_vps) - 1;
+
+		ret = vop2_plane_init(vop2, win, possible_crtcs);
+
+		if (ret) {
+			drm_err(vop2->drm, "failed to init plane %s: %d\n", win->data->name, ret);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		plane = &vp->primary_plane->base;
+
+		ret = drm_crtc_init_with_planes(drm, &vp->crtc, plane, NULL, &vop2_crtc_funcs,
+						"video_port%d", vp->id);
+		if (ret) {
+			drm_err(vop2->drm, "crtc init for video_port%d failed\n", i);
+			return ret;
+		}
+
+		drm_crtc_helper_add(&vp->crtc, &vop2_crtc_helper_funcs);
+
+		init_completion(&vp->dsp_hold_completion);
+	}
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		if (vp->crtc.port)
+			vp->nlayers = NR_MIXERS / nvps;
+	}
+
+	return 0;
+}
+
+static void vop2_destroy_crtc(struct drm_crtc *crtc)
+{
+	of_node_put(crtc->port);
+
+	/*
+	 * Destroy CRTC after vop2_plane_destroy() since vop2_disable_plane()
+	 * references the CRTC.
+	 */
+	drm_crtc_cleanup(crtc);
+}
+
+static int vop2_cluster_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_cluster_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 1, 5),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 14, 14),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 18, 18),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_ST, 0, 31),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_CLUSTER_WIN_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_CLUSTER_WIN_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 19, 19),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 8, 8),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 9, 9),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 10, 11),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 14, 15),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 12, 13),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 2, 3),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 28, 28),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 29, 29),
+
+		/* cluster regs */
+		[VOP2_WIN_AFBC_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 1, 1),
+		[VOP2_WIN_CLUSTER_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 0, 0),
+		[VOP2_WIN_CLUSTER_LB_MODE] = REG_FIELD(RK3568_CLUSTER_CTRL, 4, 7),
+
+		/* afbc regs */
+		[VOP2_WIN_AFBC_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 2, 6),
+		[VOP2_WIN_AFBC_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 9, 9),
+		[VOP2_WIN_AFBC_UV_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 10, 10),
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL, 4, 4),
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 7, 7),
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 8, 8),
+		[VOP2_WIN_AFBC_HDR_PTR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_HDR_PTR, 0, 31),
+		[VOP2_WIN_AFBC_PIC_SIZE] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE, 0, 31),
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 0, 15),
+		[VOP2_WIN_AFBC_TILE_NUM] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 16, 31),
+		[VOP2_WIN_AFBC_PIC_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_DSP_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_ROTATE_90] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 0, 0),
+		[VOP2_WIN_AFBC_ROTATE_270] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 1, 1),
+		[VOP2_WIN_XMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 2, 2),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 3, 3),
+		[VOP2_WIN_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_X] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_Y] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT2] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT4] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_cluster_regs); i++)
+		vop2_cluster_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_cluster_regs,
+					    ARRAY_SIZE(vop2_cluster_regs));
+};
+
+static int vop2_esmart_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_esmart_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 1, 5),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 12, 12),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 14, 14),
+		[VOP2_WIN_UV_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 16, 16),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_SMART_REGION0_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_SMART_REGION0_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_SMART_REGION0_DSP_ST, 0, 28),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_SMART_REGION0_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_SMART_REGION0_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 17, 17),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_SMART_CTRL0, 0, 0),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_SMART_CTRL0, 1, 1),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_SMART_CTRL0, 2, 3),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_SMART_CTRL1, 31, 31),
+		[VOP2_WIN_COLOR_KEY] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 0, 29),
+		[VOP2_WIN_COLOR_KEY_EN] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 31, 31),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_SCALE_CBCR_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 0, 15),
+		[VOP2_WIN_SCALE_CBCR_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 16, 31),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 0, 1),
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 2, 3),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 4, 5),
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 6, 7),
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 8, 9),
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 10, 11),
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 12, 13),
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 14, 15),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 16, 17),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 8, 8),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 9, 9),
+		[VOP2_WIN_VSD_CBCR_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 10, 10),
+		[VOP2_WIN_VSD_CBCR_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 11, 11),
+		[VOP2_WIN_XMIRROR] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_LB_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_FORMAT] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_RB_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TILE_NUM] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_SIZE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_DSP_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HDR_PTR] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_270] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_90] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_esmart_regs); i++)
+		vop2_esmart_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_esmart_regs,
+					    ARRAY_SIZE(vop2_esmart_regs));
+};
+
+static int vop2_win_init(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct vop2_win *win;
+	int i, ret;
+
+	for (i = 0; i < vop2_data->win_size; i++) {
+		const struct vop2_win_data *win_data = &vop2_data->win[i];
+
+		win = &vop2->win[i];
+		win->data = win_data;
+		win->type = win_data->type;
+		win->offset = win_data->base;
+		win->win_id = i;
+		win->vop2 = vop2;
+		if (vop2_cluster_window(win))
+			ret = vop2_cluster_init(win);
+		else
+			ret = vop2_esmart_init(win);
+		if (ret)
+			return ret;
+	}
+
+	vop2->registered_num_wins = vop2_data->win_size;
+
+	return 0;
+}
+
+/*
+ * The window registers are only updated when config done is written.
+ * Until that they read back the old value. As we read-modify-write
+ * these registers mark them as non-volatile. This makes sure we read
+ * the new values from the regmap register cache.
+ */
+static const struct regmap_range vop2_nonvolatile_range[] = {
+	regmap_reg_range(0x1000, 0x23ff),
+};
+
+static const struct regmap_access_table vop2_volatile_table = {
+	.no_ranges = vop2_nonvolatile_range,
+	.n_no_ranges = ARRAY_SIZE(vop2_nonvolatile_range),
+};
+
+static const struct regmap_config vop2_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x3000,
+	.name		= "vop2",
+	.volatile_table	= &vop2_volatile_table,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int vop2_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct vop2_data *vop2_data;
+	struct drm_device *drm = data;
+	struct vop2 *vop2;
+	struct resource *res;
+	size_t alloc_size;
+	int ret;
+
+	vop2_data = of_device_get_match_data(dev);
+	if (!vop2_data)
+		return -ENODEV;
+
+	/* Allocate vop2 struct and its vop2_win array */
+	alloc_size = sizeof(*vop2) + sizeof(*vop2->win) * vop2_data->win_size;
+	vop2 = devm_kzalloc(dev, alloc_size, GFP_KERNEL);
+	if (!vop2)
+		return -ENOMEM;
+
+	vop2->dev = dev;
+	vop2->data = vop2_data;
+	vop2->drm = drm;
+
+	dev_set_drvdata(dev, vop2);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!res) {
+		drm_err(vop2->drm, "failed to get vop2 register byname\n");
+		return -EINVAL;
+	}
+
+	vop2->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vop2->regs))
+		return PTR_ERR(vop2->regs);
+	vop2->len = resource_size(res);
+
+	vop2->map = devm_regmap_init_mmio(dev, vop2->regs, &vop2_regmap_config);
+
+	ret = vop2_win_init(vop2);
+	if (ret)
+		return ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gamma_lut");
+	if (res) {
+		vop2->lut_regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(vop2->lut_regs))
+			return PTR_ERR(vop2->lut_regs);
+	}
+
+	vop2->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+
+	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
+	if (IS_ERR(vop2->hclk)) {
+		drm_err(vop2->drm, "failed to get hclk source\n");
+		return PTR_ERR(vop2->hclk);
+	}
+
+	vop2->aclk = devm_clk_get(vop2->dev, "aclk");
+	if (IS_ERR(vop2->aclk)) {
+		drm_err(vop2->drm, "failed to get aclk source\n");
+		return PTR_ERR(vop2->aclk);
+	}
+
+	vop2->irq = platform_get_irq(pdev, 0);
+	if (vop2->irq < 0) {
+		drm_err(vop2->drm, "cannot find irq for vop2\n");
+		return vop2->irq;
+	}
+
+	mutex_init(&vop2->vop2_lock);
+
+	ret = devm_request_irq(dev, vop2->irq, vop2_isr, IRQF_SHARED, dev_name(dev), vop2);
+	if (ret)
+		return ret;
+
+	ret = rockchip_drm_dma_attach_device(vop2->drm, vop2->dev);
+	if (ret) {
+		drm_err(vop2->drm, "failed to attach dma mapping, %d\n", ret);
+		return ret;
+	}
+
+	ret = vop2_create_crtc(vop2);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static void vop2_unbind(struct device *dev, struct device *master, void *data)
+{
+	struct vop2 *vop2 = dev_get_drvdata(dev);
+	struct drm_device *drm = vop2->drm;
+	struct list_head *plane_list = &drm->mode_config.plane_list;
+	struct list_head *crtc_list = &drm->mode_config.crtc_list;
+	struct drm_crtc *crtc, *tmpc;
+	struct drm_plane *plane, *tmpp;
+
+	rockchip_drm_dma_detach_device(vop2->drm, vop2->dev);
+
+	pm_runtime_disable(dev);
+
+	list_for_each_entry_safe(plane, tmpp, plane_list, head)
+		drm_plane_cleanup(plane);
+
+	list_for_each_entry_safe(crtc, tmpc, crtc_list, head)
+		vop2_destroy_crtc(crtc);
+}
+
+const struct component_ops vop2_component_ops = {
+	.bind = vop2_bind,
+	.unbind = vop2_unbind,
+};
+EXPORT_SYMBOL_GPL(vop2_component_ops);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
new file mode 100644
index 000000000000..bb5677ff00e9
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:Mark Yao <mark.yao@rock-chips.com>
+ */
+
+#ifndef _ROCKCHIP_DRM_VOP2_H
+#define _ROCKCHIP_DRM_VOP2_H
+
+#include "rockchip_drm_vop.h"
+
+#include <linux/regmap.h>
+#include <drm/drm_modes.h>
+
+#define VOP_FEATURE_OUTPUT_10BIT        BIT(0)
+
+#define WIN_FEATURE_AFBDC		BIT(0)
+#define WIN_FEATURE_CLUSTER		BIT(1)
+
+/*
+ *  the delay number of a window in different mode.
+ */
+enum win_dly_mode {
+	VOP2_DLY_MODE_DEFAULT,   /**< default mode */
+	VOP2_DLY_MODE_HISO_S,    /** HDR in SDR out mode, as a SDR window */
+	VOP2_DLY_MODE_HIHO_H,    /** HDR in HDR out mode, as a HDR window */
+	VOP2_DLY_MODE_MAX,
+};
+
+struct vop_rect {
+	int width;
+	int height;
+};
+
+enum vop2_scale_up_mode {
+	VOP2_SCALE_UP_NRST_NBOR,
+	VOP2_SCALE_UP_BIL,
+	VOP2_SCALE_UP_BIC,
+};
+
+enum vop2_scale_down_mode {
+	VOP2_SCALE_DOWN_NRST_NBOR,
+	VOP2_SCALE_DOWN_BIL,
+	VOP2_SCALE_DOWN_AVG,
+};
+
+enum vop2_win_regs {
+	VOP2_WIN_ENABLE,
+	VOP2_WIN_FORMAT,
+	VOP2_WIN_CSC_MODE,
+	VOP2_WIN_XMIRROR,
+	VOP2_WIN_YMIRROR,
+	VOP2_WIN_RB_SWAP,
+	VOP2_WIN_UV_SWAP,
+	VOP2_WIN_ACT_INFO,
+	VOP2_WIN_DSP_INFO,
+	VOP2_WIN_DSP_ST,
+	VOP2_WIN_YRGB_MST,
+	VOP2_WIN_UV_MST,
+	VOP2_WIN_YRGB_VIR,
+	VOP2_WIN_UV_VIR,
+	VOP2_WIN_YUV_CLIP,
+	VOP2_WIN_Y2R_EN,
+	VOP2_WIN_R2Y_EN,
+	VOP2_WIN_COLOR_KEY,
+	VOP2_WIN_COLOR_KEY_EN,
+	VOP2_WIN_DITHER_UP,
+
+	/* scale regs */
+	VOP2_WIN_SCALE_YRGB_X,
+	VOP2_WIN_SCALE_YRGB_Y,
+	VOP2_WIN_SCALE_CBCR_X,
+	VOP2_WIN_SCALE_CBCR_Y,
+	VOP2_WIN_YRGB_HOR_SCL_MODE,
+	VOP2_WIN_YRGB_HSCL_FILTER_MODE,
+	VOP2_WIN_YRGB_VER_SCL_MODE,
+	VOP2_WIN_YRGB_VSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_VER_SCL_MODE,
+	VOP2_WIN_CBCR_HSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_HOR_SCL_MODE,
+	VOP2_WIN_CBCR_VSCL_FILTER_MODE,
+	VOP2_WIN_VSD_CBCR_GT2,
+	VOP2_WIN_VSD_CBCR_GT4,
+	VOP2_WIN_VSD_YRGB_GT2,
+	VOP2_WIN_VSD_YRGB_GT4,
+	VOP2_WIN_BIC_COE_SEL,
+
+	/* cluster regs */
+	VOP2_WIN_CLUSTER_ENABLE,
+	VOP2_WIN_AFBC_ENABLE,
+	VOP2_WIN_CLUSTER_LB_MODE,
+
+	/* afbc regs */
+	VOP2_WIN_AFBC_FORMAT,
+	VOP2_WIN_AFBC_RB_SWAP,
+	VOP2_WIN_AFBC_UV_SWAP,
+	VOP2_WIN_AFBC_AUTO_GATING_EN,
+	VOP2_WIN_AFBC_BLOCK_SPLIT_EN,
+	VOP2_WIN_AFBC_PIC_VIR_WIDTH,
+	VOP2_WIN_AFBC_TILE_NUM,
+	VOP2_WIN_AFBC_PIC_OFFSET,
+	VOP2_WIN_AFBC_PIC_SIZE,
+	VOP2_WIN_AFBC_DSP_OFFSET,
+	VOP2_WIN_AFBC_TRANSFORM_OFFSET,
+	VOP2_WIN_AFBC_HDR_PTR,
+	VOP2_WIN_AFBC_HALF_BLOCK_EN,
+	VOP2_WIN_AFBC_ROTATE_270,
+	VOP2_WIN_AFBC_ROTATE_90,
+	VOP2_WIN_MAX_REG,
+};
+
+struct vop2_win_data {
+	const char *name;
+	uint8_t phys_id;
+
+	uint32_t base;
+	enum drm_plane_type type;
+
+	uint32_t nformats;
+	const uint32_t *formats;
+	const uint64_t *format_modifiers;
+	const unsigned int supported_rotations;
+
+	/**
+	 * @layer_sel_id: defined by register OVERLAY_LAYER_SEL of VOP2
+	 */
+	int layer_sel_id;
+	uint64_t feature;
+
+	unsigned int max_upscale_factor;
+	unsigned int max_downscale_factor;
+	const uint8_t dly[VOP2_DLY_MODE_MAX];
+};
+
+struct vop2_video_port_data {
+	char id;
+	uint32_t feature;
+	uint16_t gamma_lut_len;
+	uint16_t cubic_lut_len;
+	struct vop_rect max_output;
+	const u8 pre_scan_max_dly[4];
+	const struct vop2_video_port_regs *regs;
+	int offset;
+};
+
+struct vop2_data {
+	uint8_t nr_vps;
+	uint8_t nr_mixers;
+	uint8_t nr_layers;
+	uint8_t nr_gammas;
+	const struct vop2_ctrl *ctrl;
+	const struct vop2_win_data *win;
+	const struct vop2_video_port_data *vp;
+	const struct vop_csc_table *csc_table;
+	struct vop_rect max_input;
+	struct vop_rect max_output;
+
+	unsigned int win_size;
+	unsigned int soc_id;
+};
+
+/* interrupt define */
+#define FS_NEW_INTR			BIT(4)
+#define ADDR_SAME_INTR			BIT(5)
+#define LINE_FLAG1_INTR			BIT(6)
+#define WIN0_EMPTY_INTR			BIT(7)
+#define WIN1_EMPTY_INTR			BIT(8)
+#define WIN2_EMPTY_INTR			BIT(9)
+#define WIN3_EMPTY_INTR			BIT(10)
+#define HWC_EMPTY_INTR			BIT(11)
+#define POST_BUF_EMPTY_INTR		BIT(12)
+#define PWM_GEN_INTR			BIT(13)
+#define DMA_FINISH_INTR			BIT(14)
+#define FS_FIELD_INTR			BIT(15)
+#define FE_INTR				BIT(16)
+#define WB_UV_FIFO_FULL_INTR		BIT(17)
+#define WB_YRGB_FIFO_FULL_INTR		BIT(18)
+#define WB_COMPLETE_INTR		BIT(19)
+
+/*
+ * display output interface supported by rockchip lcdc
+ */
+#define ROCKCHIP_OUT_MODE_P888		0
+#define ROCKCHIP_OUT_MODE_BT1120	0
+#define ROCKCHIP_OUT_MODE_P666		1
+#define ROCKCHIP_OUT_MODE_P565		2
+#define ROCKCHIP_OUT_MODE_BT656		5
+#define ROCKCHIP_OUT_MODE_S888		8
+#define ROCKCHIP_OUT_MODE_S888_DUMMY	12
+#define ROCKCHIP_OUT_MODE_YUV420	14
+/* for use special outface */
+#define ROCKCHIP_OUT_MODE_AAAA		15
+
+enum vop_csc_format {
+	CSC_BT601L,
+	CSC_BT709L,
+	CSC_BT601F,
+	CSC_BT2020,
+};
+
+enum src_factor_mode {
+	SRC_FAC_ALPHA_ZERO,
+	SRC_FAC_ALPHA_ONE,
+	SRC_FAC_ALPHA_DST,
+	SRC_FAC_ALPHA_DST_INVERSE,
+	SRC_FAC_ALPHA_SRC,
+	SRC_FAC_ALPHA_SRC_GLOBAL,
+};
+
+enum dst_factor_mode {
+	DST_FAC_ALPHA_ZERO,
+	DST_FAC_ALPHA_ONE,
+	DST_FAC_ALPHA_SRC,
+	DST_FAC_ALPHA_SRC_INVERSE,
+	DST_FAC_ALPHA_DST,
+	DST_FAC_ALPHA_DST_GLOBAL,
+};
+
+#define RK3568_GRF_VO_CON1			0x0364
+/* System registers definition */
+#define RK3568_REG_CFG_DONE			0x000
+#define RK3568_VERSION_INFO			0x004
+#define RK3568_SYS_AUTO_GATING_CTRL		0x008
+#define RK3568_SYS_AXI_LUT_CTRL			0x024
+#define RK3568_DSP_IF_EN			0x028
+#define RK3568_DSP_IF_CTRL			0x02c
+#define RK3568_DSP_IF_POL			0x030
+#define RK3568_WB_CTRL				0x40
+#define RK3568_WB_XSCAL_FACTOR			0x44
+#define RK3568_WB_YRGB_MST			0x48
+#define RK3568_WB_CBR_MST			0x4C
+#define RK3568_OTP_WIN_EN			0x050
+#define RK3568_LUT_PORT_SEL			0x058
+#define RK3568_SYS_STATUS0			0x060
+#define RK3568_VP_LINE_FLAG(vp)			(0x70 + (vp) * 0x4)
+#define RK3568_SYS0_INT_EN			0x80
+#define RK3568_SYS0_INT_CLR			0x84
+#define RK3568_SYS0_INT_STATUS			0x88
+#define RK3568_SYS1_INT_EN			0x90
+#define RK3568_SYS1_INT_CLR			0x94
+#define RK3568_SYS1_INT_STATUS			0x98
+#define RK3568_VP_INT_EN(vp)			(0xA0 + (vp) * 0x10)
+#define RK3568_VP_INT_CLR(vp)			(0xA4 + (vp) * 0x10)
+#define RK3568_VP_INT_STATUS(vp)		(0xA8 + (vp) * 0x10)
+#define RK3568_VP_INT_RAW_STATUS(vp)		(0xAC + (vp) * 0x10)
+
+/* Video Port registers definition */
+#define RK3568_VP_DSP_CTRL			0x00
+#define RK3568_VP_MIPI_CTRL			0x04
+#define RK3568_VP_COLOR_BAR_CTRL		0x08
+#define RK3568_VP_3D_LUT_CTRL			0x10
+#define RK3568_VP_3D_LUT_MST			0x20
+#define RK3568_VP_DSP_BG			0x2C
+#define RK3568_VP_PRE_SCAN_HTIMING		0x30
+#define RK3568_VP_POST_DSP_HACT_INFO		0x34
+#define RK3568_VP_POST_DSP_VACT_INFO		0x38
+#define RK3568_VP_POST_SCL_FACTOR_YRGB		0x3C
+#define RK3568_VP_POST_SCL_CTRL			0x40
+#define RK3568_VP_POST_DSP_VACT_INFO_F1		0x44
+#define RK3568_VP_DSP_HTOTAL_HS_END		0x48
+#define RK3568_VP_DSP_HACT_ST_END		0x4C
+#define RK3568_VP_DSP_VTOTAL_VS_END		0x50
+#define RK3568_VP_DSP_VACT_ST_END		0x54
+#define RK3568_VP_DSP_VS_ST_END_F1		0x58
+#define RK3568_VP_DSP_VACT_ST_END_F1		0x5C
+#define RK3568_VP_BCSH_CTRL			0x60
+#define RK3568_VP_BCSH_BCS			0x64
+#define RK3568_VP_BCSH_H			0x68
+#define RK3568_VP_BCSH_COLOR_BAR		0x6C
+
+/* Overlay registers definition    */
+#define RK3568_OVL_CTRL				0x600
+#define RK3568_OVL_LAYER_SEL			0x604
+#define RK3568_OVL_PORT_SEL			0x608
+#define RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL	0x610
+#define RK3568_CLUSTER0_MIX_DST_COLOR_CTRL	0x614
+#define RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL	0x618
+#define RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL	0x61C
+#define RK3568_MIX0_SRC_COLOR_CTRL		0x650
+#define RK3568_MIX0_DST_COLOR_CTRL		0x654
+#define RK3568_MIX0_SRC_ALPHA_CTRL		0x658
+#define RK3568_MIX0_DST_ALPHA_CTRL		0x65C
+#define RK3568_HDR0_SRC_COLOR_CTRL		0x6C0
+#define RK3568_HDR0_DST_COLOR_CTRL		0x6C4
+#define RK3568_HDR0_SRC_ALPHA_CTRL		0x6C8
+#define RK3568_HDR0_DST_ALPHA_CTRL		0x6CC
+#define RK3568_VP_BG_MIX_CTRL(vp)		(0x6E0 + (vp) * 4)
+#define RK3568_CLUSTER_DLY_NUM			0x6F0
+#define RK3568_SMART_DLY_NUM			0x6F8
+
+/* Cluster register definition, offset relative to window base */
+#define RK3568_CLUSTER_WIN_CTRL0		0x00
+#define RK3568_CLUSTER_WIN_CTRL1		0x04
+#define RK3568_CLUSTER_WIN_YRGB_MST		0x10
+#define RK3568_CLUSTER_WIN_CBR_MST		0x14
+#define RK3568_CLUSTER_WIN_VIR			0x18
+#define RK3568_CLUSTER_WIN_ACT_INFO		0x20
+#define RK3568_CLUSTER_WIN_DSP_INFO		0x24
+#define RK3568_CLUSTER_WIN_DSP_ST		0x28
+#define RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB	0x30
+#define RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET	0x3C
+#define RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL	0x50
+#define RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE	0x54
+#define RK3568_CLUSTER_WIN_AFBCD_HDR_PTR	0x58
+#define RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH	0x5C
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE	0x60
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET	0x64
+#define RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET	0x68
+#define RK3568_CLUSTER_WIN_AFBCD_CTRL		0x6C
+
+#define RK3568_CLUSTER_CTRL			0x100
+
+/* (E)smart register definition, offset relative to window base */
+#define RK3568_SMART_CTRL0			0x00
+#define RK3568_SMART_CTRL1			0x04
+#define RK3568_SMART_REGION0_CTRL		0x10
+#define RK3568_SMART_REGION0_YRGB_MST		0x14
+#define RK3568_SMART_REGION0_CBR_MST		0x18
+#define RK3568_SMART_REGION0_VIR		0x1C
+#define RK3568_SMART_REGION0_ACT_INFO		0x20
+#define RK3568_SMART_REGION0_DSP_INFO		0x24
+#define RK3568_SMART_REGION0_DSP_ST		0x28
+#define RK3568_SMART_REGION0_SCL_CTRL		0x30
+#define RK3568_SMART_REGION0_SCL_FACTOR_YRGB	0x34
+#define RK3568_SMART_REGION0_SCL_FACTOR_CBR	0x38
+#define RK3568_SMART_REGION0_SCL_OFFSET		0x3C
+#define RK3568_SMART_REGION1_CTRL		0x40
+#define RK3568_SMART_REGION1_YRGB_MST		0x44
+#define RK3568_SMART_REGION1_CBR_MST		0x48
+#define RK3568_SMART_REGION1_VIR		0x4C
+#define RK3568_SMART_REGION1_ACT_INFO		0x50
+#define RK3568_SMART_REGION1_DSP_INFO		0x54
+#define RK3568_SMART_REGION1_DSP_ST		0x58
+#define RK3568_SMART_REGION1_SCL_CTRL		0x60
+#define RK3568_SMART_REGION1_SCL_FACTOR_YRGB	0x64
+#define RK3568_SMART_REGION1_SCL_FACTOR_CBR	0x68
+#define RK3568_SMART_REGION1_SCL_OFFSET		0x6C
+#define RK3568_SMART_REGION2_CTRL		0x70
+#define RK3568_SMART_REGION2_YRGB_MST		0x74
+#define RK3568_SMART_REGION2_CBR_MST		0x78
+#define RK3568_SMART_REGION2_VIR		0x7C
+#define RK3568_SMART_REGION2_ACT_INFO		0x80
+#define RK3568_SMART_REGION2_DSP_INFO		0x84
+#define RK3568_SMART_REGION2_DSP_ST		0x88
+#define RK3568_SMART_REGION2_SCL_CTRL		0x90
+#define RK3568_SMART_REGION2_SCL_FACTOR_YRGB	0x94
+#define RK3568_SMART_REGION2_SCL_FACTOR_CBR	0x98
+#define RK3568_SMART_REGION2_SCL_OFFSET		0x9C
+#define RK3568_SMART_REGION3_CTRL		0xA0
+#define RK3568_SMART_REGION3_YRGB_MST		0xA4
+#define RK3568_SMART_REGION3_CBR_MST		0xA8
+#define RK3568_SMART_REGION3_VIR		0xAC
+#define RK3568_SMART_REGION3_ACT_INFO		0xB0
+#define RK3568_SMART_REGION3_DSP_INFO		0xB4
+#define RK3568_SMART_REGION3_DSP_ST		0xB8
+#define RK3568_SMART_REGION3_SCL_CTRL		0xC0
+#define RK3568_SMART_REGION3_SCL_FACTOR_YRGB	0xC4
+#define RK3568_SMART_REGION3_SCL_FACTOR_CBR	0xC8
+#define RK3568_SMART_REGION3_SCL_OFFSET		0xCC
+#define RK3568_SMART_COLOR_KEY_CTRL		0xD0
+
+/* HDR register definition */
+#define RK3568_HDR_LUT_CTRL			0x2000
+#define RK3568_HDR_LUT_MST			0x2004
+#define RK3568_SDR2HDR_CTRL			0x2010
+#define RK3568_HDR2SDR_CTRL			0x2020
+#define RK3568_HDR2SDR_SRC_RANGE		0x2024
+#define RK3568_HDR2SDR_NORMFACEETF		0x2028
+#define RK3568_HDR2SDR_DST_RANGE		0x202C
+#define RK3568_HDR2SDR_NORMFACCGAMMA		0x2030
+#define RK3568_HDR_EETF_OETF_Y0			0x203C
+#define RK3568_HDR_SAT_Y0			0x20C0
+#define RK3568_HDR_EOTF_OETF_Y0			0x20F0
+#define RK3568_HDR_OETF_DX_POW1			0x2200
+#define RK3568_HDR_OETF_XN1			0x2300
+
+#define RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN		BIT(15)
+
+#define RK3568_VP_DSP_CTRL__STANDBY			BIT(31)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_MODE		BIT(20)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL		GENMASK(19, 18)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_EN		BIT(17)
+#define RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN		BIT(16)
+#define RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y		BIT(15)
+#define RK3568_VP_DSP_CTRL__DSP_RB_SWAP			BIT(9)
+#define RK3568_VP_DSP_CTRL__DSP_INTERLACE		BIT(7)
+#define RK3568_VP_DSP_CTRL__DSP_FILED_POL		BIT(6)
+#define RK3568_VP_DSP_CTRL__P2I_EN			BIT(5)
+#define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
+#define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
+
+#define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
+#define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
+
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX		GENMASK(26, 25)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1			BIT(24)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1			BIT(20)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX		GENMASK(19, 18)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(17, 16)
+#define RK3568_SYS_DSP_INFACE_EN_EDP_MUX		GENMASK(15, 14)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI_MUX		GENMASK(11, 10)
+#define RK3568_SYS_DSP_INFACE_EN_RGB_MUX		GENMASK(9, 8)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0			BIT(5)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0			BIT(4)
+#define RK3568_SYS_DSP_INFACE_EN_EDP			BIT(3)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
+#define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
+
+#define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
+#define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
+#define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
+#define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
+
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
+
+#define RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN	BIT(31)
+
+#define RK3568_DSP_IF_POL__CFG_DONE_IMD			BIT(28)
+
+#define VOP2_SYS_AXI_BUS_NUM				2
+
+#define VOP2_CLUSTER_YUV444_10				0x12
+
+#define VOP2_COLOR_KEY_MASK				BIT(31)
+
+#define RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD		BIT(28)
+
+#define RK3568_VP_BG_MIX_CTRL__BG_DLY			GENMASK(31, 24)
+
+#define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
+#define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
+#define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
+#define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
+#define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
+#define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
+#define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
+#define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
+#define RK3568_OVL_PORT_SET__PORT1_MUX			GENMASK(7, 4)
+#define RK3568_OVL_PORT_SET__PORT0_MUX			GENMASK(3, 0)
+#define RK3568_OVL_LAYER_SEL__LAYER(layer, x)		((x) << ((layer) * 4))
+
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_1		GENMASK(31, 24)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_0		GENMASK(23, 16)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
+
+#define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
+#define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
+#define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
+#define RK3568_SMART_DLY_NUM__ESMART0			GENMASK(7, 0)
+
+#define VP_INT_DSP_HOLD_VALID	BIT(6)
+#define VP_INT_FS_FIELD		BIT(5)
+#define VP_INT_POST_BUF_EMPTY	BIT(4)
+#define VP_INT_LINE_FLAG1	BIT(3)
+#define VP_INT_LINE_FLAG0	BIT(2)
+#define VOP2_INT_BUS_ERRPR	BIT(1)
+#define VP_INT_FS		BIT(0)
+
+#define POLFLAG_DCLK_INV	BIT(3)
+
+enum vop2_layer_phy_id {
+	ROCKCHIP_VOP2_CLUSTER0 = 0,
+	ROCKCHIP_VOP2_CLUSTER1,
+	ROCKCHIP_VOP2_ESMART0,
+	ROCKCHIP_VOP2_ESMART1,
+	ROCKCHIP_VOP2_SMART0,
+	ROCKCHIP_VOP2_SMART1,
+	ROCKCHIP_VOP2_CLUSTER2,
+	ROCKCHIP_VOP2_CLUSTER3,
+	ROCKCHIP_VOP2_ESMART2,
+	ROCKCHIP_VOP2_ESMART3,
+	ROCKCHIP_VOP2_PHY_ID_INVALID = -1,
+};
+
+extern const struct component_ops vop2_component_ops;
+
+#endif /* _ROCKCHIP_DRM_VOP2_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
new file mode 100644
index 000000000000..2376e63d9478
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Rockchip Electronics Co.Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/component.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_print.h>
+
+#include "rockchip_drm_vop2.h"
+
+static const uint32_t formats_win_full_10bit[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+};
+
+static const uint32_t formats_win_full_10bit_yuyv[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_VYUY,
+};
+
+static const uint32_t formats_win_lite[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+};
+
+static const uint64_t format_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const uint64_t format_modifiers_afbc[] = {
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	/* SPLIT mandates SPARSE, RGB modes mandates YTR */
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE |
+				AFBC_FORMAT_MOD_SPLIT),
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const struct vop2_video_port_data rk3568_vop_video_ports[] = {
+	{
+		.id = 0,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 9 * 9 * 9,
+		.max_output = { 4096, 2304 },
+		.pre_scan_max_dly = { 69, 53, 53, 42 },
+		.offset = 0xc00,
+	}, {
+		.id = 1,
+		.gamma_lut_len = 1024,
+		.max_output = { 2048, 1536 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xd00,
+	}, {
+		.id = 2,
+		.gamma_lut_len = 1024,
+		.max_output = { 1920, 1080 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xe00,
+	},
+};
+
+/*
+ * rk3568 vop with 2 cluster, 2 esmart win, 2 smart win.
+ * Every cluster can work as 4K win or split into two win.
+ * All win in cluster support AFBCD.
+ *
+ * Every esmart win and smart win support 4 Multi-region.
+ *
+ * Scale filter mode:
+ *
+ * * Cluster:  bicubic for horizontal scale up, others use bilinear
+ * * ESmart:
+ *    * nearest-neighbor/bilinear/bicubic for scale up
+ *    * nearest-neighbor/bilinear/average for scale down
+ *
+ *
+ * @TODO describe the wind like cpu-map dt nodes;
+ */
+static const struct vop2_win_data rk3568_vop_win_data[] = {
+	{
+		.name = "Smart0-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART0,
+		.base = 0x1c00,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.layer_sel_id = 3,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Smart1-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART1,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.base = 0x1e00,
+		.layer_sel_id = 7,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart1-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART1,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1a00,
+		.layer_sel_id = 6,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart0-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART0,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1800,
+		.layer_sel_id = 2,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Cluster0-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
+		.base = 0x1000,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 0,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster1-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
+		.base = 0x1200,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 1,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	},
+};
+
+static const struct vop2_data rk3566_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3566,
+};
+
+static const struct vop2_data rk3568_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3568,
+};
+
+static const struct of_device_id vop2_dt_match[] = {
+	{
+		.compatible = "rockchip,rk3566-vop",
+		.data = &rk3566_vop,
+	}, {
+		.compatible = "rockchip,rk3568-vop",
+		.data = &rk3568_vop,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, vop2_dt_match);
+
+static int vop2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return component_add(dev, &vop2_component_ops);
+}
+
+static int vop2_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &vop2_component_ops);
+
+	return 0;
+}
+
+struct platform_driver vop2_platform_driver = {
+	.probe = vop2_probe,
+	.remove = vop2_remove,
+	.driver = {
+		.name = "rockchip-vop2",
+		.of_match_table = of_match_ptr(vop2_dt_match),
+	},
+};
-- 
2.30.2

[PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

From: Andy Yan <andy.yan@rock-chips.com>

The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.

This driver has been derived from the downstream Rockchip Kernel and
heavily modified:

- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
  functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs

The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.

Changes since v3:
- Sort includes
- fix typos
- Drop spinlock
- Use regmap_set_bits()/regmap_clear_bits()
- simplify vop2_scale_factor()
- simplify vop2_afbc_transform_offset()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig             |    6 +
 drivers/gpu/drm/rockchip/Makefile            |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c  |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h  |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c   |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h  |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2665 ++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  480 ++++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c |  285 ++
 9 files changed, 3461 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index b9b156308460..4ff0043f0ee7 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -28,6 +28,12 @@ config ROCKCHIP_VOP
 	  This selects support for the VOP driver. You should enable it
 	  on all older SoCs up to RK3399.
 
+config ROCKCHIP_VOP2
+	bool "Rockchip VOP2 driver"
+	help
+	  This selects support for the VOP2 driver. You should enable it
+	  on all newer SoCs beginning form RK3568.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
 	depends on ROCKCHIP_VOP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index dfc5512fdb9f..3ff7b21c0414 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,6 +6,7 @@
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
 		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP2) += rockchip_drm_vop2.o rockchip_vop2_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 82c8faf1fb6b..95f6c5985fdd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -459,6 +459,7 @@ static int __init rockchip_drm_init(void)
 
 	num_rockchip_sub_drivers = 0;
 	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop2_platform_driver, CONFIG_ROCKCHIP_VOP2);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 143a48330f84..6e1f97e1e4a6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -18,7 +18,7 @@
 
 #define ROCKCHIP_MAX_FB_BUFFER	3
 #define ROCKCHIP_MAX_CONNECTOR	2
-#define ROCKCHIP_MAX_CRTC	2
+#define ROCKCHIP_MAX_CRTC	4
 
 struct drm_device;
 struct drm_connector;
@@ -31,6 +31,9 @@ struct rockchip_crtc_state {
 	int output_bpc;
 	int output_flags;
 	bool enable_afbc;
+	uint32_t bus_format;
+	u32 bus_flags;
+	int color_space;
 };
 #define to_rockchip_crtc_state(s) \
 		container_of(s, struct rockchip_crtc_state, base)
@@ -63,4 +66,6 @@ extern struct platform_driver rockchip_dp_driver;
 extern struct platform_driver rockchip_lvds_driver;
 extern struct platform_driver vop_platform_driver;
 extern struct platform_driver rk3066_hdmi_driver;
+extern struct platform_driver vop2_platform_driver;
+
 #endif /* _ROCKCHIP_DRM_DRV_H_ */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
index 3aa37e177667..0d2cb4f3922b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
@@ -134,4 +134,6 @@ void rockchip_drm_mode_config_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = &rockchip_drm_mode_config_funcs;
 	dev->mode_config.helper_private = &rockchip_mode_config_helpers;
+
+	dev->mode_config.normalize_zpos = true;
 }
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index 857d97cdc67c..1e364d7b50e6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -54,9 +54,23 @@ struct vop_afbc {
 	struct vop_reg enable;
 	struct vop_reg win_sel;
 	struct vop_reg format;
+	struct vop_reg rb_swap;
+	struct vop_reg uv_swap;
+	struct vop_reg auto_gating_en;
+	struct vop_reg block_split_en;
+	struct vop_reg pic_vir_width;
+	struct vop_reg tile_num;
 	struct vop_reg hreg_block_split;
+	struct vop_reg pic_offset;
 	struct vop_reg pic_size;
+	struct vop_reg dsp_offset;
+	struct vop_reg transform_offset;
 	struct vop_reg hdr_ptr;
+	struct vop_reg half_block_en;
+	struct vop_reg xmirror;
+	struct vop_reg ymirror;
+	struct vop_reg rotate_270;
+	struct vop_reg rotate_90;
 	struct vop_reg rstn;
 };
 
@@ -410,4 +424,5 @@ static inline int scl_vop_cal_lb_mode(int width, bool is_yuv)
 }
 
 extern const struct component_ops vop_component_ops;
+
 #endif /* _ROCKCHIP_DRM_VOP_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
new file mode 100644
index 000000000000..9ceaae97ed0c
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -0,0 +1,2665 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/swab.h>
+
+#include <drm/drm.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_debugfs.h>
+#include <drm/drm_flip_work.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <uapi/linux/videodev2.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_gem.h"
+#include "rockchip_drm_fb.h"
+#include "rockchip_drm_vop2.h"
+
+/*
+ * VOP2 architecture
+ *
+ +----------+   +-------------+                                                        +-----------+
+ |  Cluster |   | Sel 1 from 6|                                                        | 1 from 3  |
+ |  window0 |   |    Layer0   |                                                        |    RGB    |
+ +----------+   +-------------+              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 layers|    |             |
+ |  Cluster |   | Sel 1 from 6|              |   Overlay0    +--->| Video Port0 |      +-----------+
+ |  window1 |   |    Layer1   |              |               |    |             |      | 1 from 3  |
+ +----------+   +-------------+              +---------------+    +-------------+      |   LVDS    |
+ +----------+   +-------------+                                                        +-----------+
+ |  Esmart  |   | Sel 1 from 6|
+ |  window0 |   |   Layer2    |              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 Layers|    |             | +--> | 1 from 3  |
+ +----------+   +-------------+   -------->  |   Overlay1    +--->| Video Port1 |      |   MIPI    |
+ |  Esmart  |   | Sel 1 from 6|   -------->  |               |    |             |      +-----------+
+ |  Window1 |   |   Layer3    |              +---------------+    +-------------+
+ +----------+   +-------------+                                                        +-----------+
+ +----------+   +-------------+                                                        | 1 from 3  |
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |   HDMI    |
+ |  Window0 |   |    Layer4   |              |N from 6 Layers|    |             |      +-----------+
+ +----------+   +-------------+              |   Overlay2    +--->| Video Port2 |
+ +----------+   +-------------+              |               |    |             |      +-----------+
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |  1 from 3 |
+ |  Window1 |   |    Layer5   |                                                        |    eDP    |
+ +----------+   +-------------+                                                        +-----------+
+ *
+ */
+
+enum vop2_data_format {
+	VOP2_FMT_ARGB8888 = 0,
+	VOP2_FMT_RGB888,
+	VOP2_FMT_RGB565,
+	VOP2_FMT_XRGB101010,
+	VOP2_FMT_YUV420SP,
+	VOP2_FMT_YUV422SP,
+	VOP2_FMT_YUV444SP,
+	VOP2_FMT_YUYV422 = 8,
+	VOP2_FMT_YUYV420,
+	VOP2_FMT_VYUY422,
+	VOP2_FMT_VYUY420,
+	VOP2_FMT_YUV420SP_TILE_8x4 = 0x10,
+	VOP2_FMT_YUV420SP_TILE_16x2,
+	VOP2_FMT_YUV422SP_TILE_8x4,
+	VOP2_FMT_YUV422SP_TILE_16x2,
+	VOP2_FMT_YUV420SP_10,
+	VOP2_FMT_YUV422SP_10,
+	VOP2_FMT_YUV444SP_10,
+};
+
+enum vop2_afbc_format {
+	VOP2_AFBC_FMT_RGB565,
+	VOP2_AFBC_FMT_ARGB2101010 = 2,
+	VOP2_AFBC_FMT_YUV420_10BIT,
+	VOP2_AFBC_FMT_RGB888,
+	VOP2_AFBC_FMT_ARGB8888,
+	VOP2_AFBC_FMT_YUV420 = 9,
+	VOP2_AFBC_FMT_YUV422 = 0xb,
+	VOP2_AFBC_FMT_YUV422_10BIT = 0xe,
+	VOP2_AFBC_FMT_INVALID = -1,
+};
+
+union vop2_alpha_ctrl {
+	uint32_t val;
+	struct {
+		/* [0:1] */
+		uint32_t color_mode:1;
+		uint32_t alpha_mode:1;
+		/* [2:3] */
+		uint32_t blend_mode:2;
+		uint32_t alpha_cal_mode:1;
+		/* [5:7] */
+		uint32_t factor_mode:3;
+		/* [8:9] */
+		uint32_t alpha_en:1;
+		uint32_t src_dst_swap:1;
+		uint32_t reserved:6;
+		/* [16:23] */
+		uint32_t glb_alpha:8;
+	} bits;
+};
+
+struct vop2_alpha {
+	union vop2_alpha_ctrl src_color_ctrl;
+	union vop2_alpha_ctrl dst_color_ctrl;
+	union vop2_alpha_ctrl src_alpha_ctrl;
+	union vop2_alpha_ctrl dst_alpha_ctrl;
+};
+
+struct vop2_alpha_config {
+	bool src_premulti_en;
+	bool dst_premulti_en;
+	bool src_pixel_alpha_en;
+	bool dst_pixel_alpha_en;
+	uint16_t src_glb_alpha_value;
+	uint16_t dst_glb_alpha_value;
+};
+
+struct vop2_win {
+	struct vop2 *vop2;
+	struct drm_plane base;
+	const struct vop2_win_data *data;
+	struct regmap_field *reg[VOP2_WIN_MAX_REG];
+
+	/**
+	 * @win_id: graphic window id, a cluster may be split into two
+	 * graphics windows.
+	 */
+	uint8_t win_id;
+
+	uint32_t offset;
+
+	uint8_t delay;
+	enum drm_plane_type type;
+};
+
+struct vop2_video_port {
+	struct drm_crtc crtc;
+	struct vop2 *vop2;
+	struct clk *dclk;
+	uint8_t id;
+	const struct vop2_video_port_regs *regs;
+	const struct vop2_video_port_data *data;
+
+	struct completion dsp_hold_completion;
+
+	/**
+	 * @win_mask: Bitmask of windows attached to the video port;
+	 */
+	uint32_t win_mask;
+
+	struct vop2_win *primary_plane;
+	struct drm_pending_vblank_event *event;
+
+	int nlayers;
+};
+
+struct vop2 {
+	struct device *dev;
+	struct drm_device *drm;
+	struct vop2_video_port vps[ROCKCHIP_MAX_CRTC];
+
+	const struct vop2_data *data;
+	/*
+	 * Number of windows that are registered as plane, may be less than the
+	 * total number of hardware windows.
+	 */
+	uint32_t registered_num_wins;
+
+	void __iomem *regs;
+	struct regmap *map;
+
+	struct regmap *grf;
+
+	/* physical map length of vop2 register */
+	uint32_t len;
+
+	void __iomem *lut_regs;
+
+	/* protects crtc enable/disable */
+	struct mutex vop2_lock;
+
+	int irq;
+
+	/*
+	 * Some global resources are shared between all video ports(crtcs), so
+	 * we need a ref counter here.
+	 */
+	unsigned int enable_count;
+	struct clk *hclk;
+	struct clk *aclk;
+
+	/* must be put at the end of the struct */
+	struct vop2_win win[];
+};
+
+static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
+{
+	return container_of(crtc, struct vop2_video_port, crtc);
+}
+
+static struct vop2_win *to_vop2_win(struct drm_plane *p)
+{
+	return container_of(p, struct vop2_win, base);
+}
+
+static void vop2_lock(struct vop2 *vop2)
+{
+	mutex_lock(&vop2->vop2_lock);
+}
+
+static void vop2_unlock(struct vop2 *vop2)
+{
+	mutex_unlock(&vop2->vop2_lock);
+}
+
+static void vop2_writel(struct vop2 *vop2, uint32_t offset, uint32_t v)
+{
+	regmap_write(vop2->map, offset, v);
+}
+
+static void vop2_vp_write(struct vop2_video_port *vp, uint32_t offset,
+			  uint32_t v)
+{
+	regmap_write(vp->vop2->map, vp->data->offset + offset, v);
+}
+
+static uint32_t vop2_readl(struct vop2 *vop2, uint32_t offset)
+{
+	uint32_t val;
+
+	regmap_read(vop2->map, offset, &val);
+
+	return val;
+}
+
+static void vop2_win_write(const struct vop2_win *win, unsigned int reg,
+			   uint32_t v)
+{
+	regmap_field_write(win->reg[reg], v);
+}
+
+static bool vop2_cluster_window(const struct vop2_win *win)
+{
+	return win->data->feature & WIN_FEATURE_CLUSTER;
+}
+
+static void vop2_cfg_done(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
+			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+}
+
+static void vop2_win_disable(struct vop2_win *win)
+{
+	vop2_win_write(win, VOP2_WIN_ENABLE, 0);
+
+	if (vop2_cluster_window(win))
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 0);
+}
+
+static enum vop2_data_format vop2_convert_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_FMT_YUV420SP;
+	case DRM_FORMAT_NV16:
+		return VOP2_FMT_YUV422SP;
+	case DRM_FORMAT_NV24:
+		return VOP2_FMT_YUV444SP;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+		return VOP2_FMT_VYUY422;
+	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_UYVY:
+		return VOP2_FMT_YUYV422;
+	default:
+		DRM_ERROR("unsupported format[%08x]\n", format);
+		return -EINVAL;
+	}
+}
+
+static enum vop2_afbc_format vop2_convert_afbc_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_AFBC_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_AFBC_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_AFBC_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_AFBC_FMT_YUV420;
+	case DRM_FORMAT_NV16:
+		return VOP2_AFBC_FMT_YUV422;
+	default:
+		return VOP2_AFBC_FMT_INVALID;
+	}
+
+	return VOP2_AFBC_FMT_INVALID;
+}
+
+static bool vop2_win_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_BGR565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_dither_up(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_output_uv_swap(uint32_t bus_format, uint32_t output_mode)
+{
+	/*
+	 * FIXME:
+	 *
+	 * There is no media type for YUV444 output,
+	 * so when out_mode is AAAA or P888, assume output is YUV444 on
+	 * yuv format.
+	 *
+	 * From H/W testing, YUV444 mode need a rb swap.
+	 */
+	if (bus_format == MEDIA_BUS_FMT_YVYU8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_YVYU8_2X8 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_2X8 ||
+	    ((bus_format == MEDIA_BUS_FMT_YUV8_1X24 ||
+	      bus_format == MEDIA_BUS_FMT_YUV10_1X30) &&
+	     (output_mode == ROCKCHIP_OUT_MODE_AAAA ||
+	      output_mode == ROCKCHIP_OUT_MODE_P888)))
+		return true;
+	else
+		return false;
+}
+
+static bool is_yuv_output(uint32_t bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+	case MEDIA_BUS_FMT_YUYV8_2X8:
+	case MEDIA_BUS_FMT_YVYU8_2X8:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+	case MEDIA_BUS_FMT_VYUY8_2X8:
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_YVYU8_1X16:
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_VYUY8_1X16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rockchip_afbc(struct drm_plane *plane, u64 modifier)
+{
+	int i;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return false;
+
+	for (i = 0 ; i < plane->modifier_count; i++)
+		if (plane->modifiers[i] == modifier)
+			return true;
+
+	return false;
+
+}
+
+static bool rockchip_vop2_mod_supported(struct drm_plane *plane, uint32_t format, u64 modifier)
+{
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	if (modifier == DRM_FORMAT_MOD_INVALID)
+		return false;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return true;
+
+	if (!rockchip_afbc(plane, modifier)) {
+		drm_err(vop2->drm, "Unsupported format modifier 0x%llx\n", modifier);
+
+		return false;
+	}
+
+	return vop2_convert_afbc_format(format) >= 0;
+}
+
+static uint32_t vop2_afbc_transform_offset(struct drm_plane_state *pstate,
+					   bool afbc_half_block_en)
+{
+	struct drm_rect *src = &pstate->src;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t vir_width = (fb->pitches[0] << 3) / bpp;
+	uint32_t width = drm_rect_width(src) >> 16;
+	uint32_t height = drm_rect_height(src) >> 16;
+	uint32_t act_xoffset = src->x1 >> 16;
+	uint32_t act_yoffset = src->y1 >> 16;
+	uint32_t align16_crop = 0;
+	uint32_t align64_crop = 0;
+	uint32_t height_tmp;
+	uint8_t tx, ty;
+	uint8_t bottom_crop_line_num = 0;
+
+	/* 16 pixel align */
+	if (height & 0xf)
+		align16_crop = 16 - (height & 0xf);
+
+	height_tmp = height + align16_crop;
+
+	/* 64 pixel align */
+	if (height_tmp & 0x3f)
+		align64_crop = 64 - (height_tmp & 0x3f);
+
+	bottom_crop_line_num = align16_crop + align64_crop;
+
+	switch (pstate->rotation &
+		(DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y |
+		 DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270)) {
+	case DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_Y:
+		tx = act_xoffset;
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case 0:
+		tx = act_xoffset;
+		ty = act_yoffset;
+		break;
+	}
+
+	if (afbc_half_block_en)
+		ty &= 0x7f;
+
+#define TRANSFORM_XOFFSET GENMASK(7, 0)
+#define TRANSFORM_YOFFSET GENMASK(23, 16)
+	return FIELD_PREP(TRANSFORM_XOFFSET, tx) |
+		FIELD_PREP(TRANSFORM_YOFFSET, ty);
+}
+
+/*
+ * A Cluster window has 2048 x 16 line buffer, which can
+ * works at 2048 x 16(Full) or 4096 x 8 (Half) mode.
+ * for Cluster_lb_mode register:
+ * 0: half mode, for plane input width range 2048 ~ 4096
+ * 1: half mode, for cluster work at 2 * 2048 plane mode
+ * 2: half mode, for rotate_90/270 mode
+ *
+ */
+static int vop2_get_cluster_lb_mode(struct vop2_win *win, struct drm_plane_state *pstate)
+{
+	if ((pstate->rotation & DRM_MODE_ROTATE_270) || (pstate->rotation & DRM_MODE_ROTATE_90))
+		return 2;
+	else
+		return 0;
+}
+
+static uint16_t vop2_scale_factor(uint32_t src, uint32_t dst)
+{
+	uint32_t fac;
+	int shift;
+
+	if (src == dst)
+		return 0;
+
+	if (dst < 2)
+		return U16_MAX;
+
+	if (src < 2)
+		return 0;
+
+	if (src > dst)
+		shift = 12;
+	else
+		shift = 16;
+
+	src--;
+	dst--;
+
+	fac = DIV_ROUND_UP(src << shift, dst) - 1;
+
+	if (fac > U16_MAX)
+		return U16_MAX;
+
+	return fac;
+}
+
+static void vop2_setup_scale(struct vop2 *vop2, const struct vop2_win *win,
+			     uint32_t src_w, uint32_t src_h, uint32_t dst_w,
+			     uint32_t dst_h, uint32_t pixel_format)
+{
+	const struct drm_format_info *info;
+	uint16_t hor_scl_mode, ver_scl_mode;
+	uint16_t hscl_filter_mode, vscl_filter_mode;
+	uint8_t gt2 = 0;
+	uint8_t gt4 = 0;
+	uint32_t val;
+
+	info = drm_format_info(pixel_format);
+
+	if (src_h >= (4 * dst_h)) {
+		gt4 = 1;
+		src_h >>= 2;
+	} else if (src_h >= (2 * dst_h)) {
+		gt2 = 1;
+		src_h >>= 1;
+	}
+
+	hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+	ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+	if (hor_scl_mode == SCALE_UP)
+		hscl_filter_mode = VOP2_SCALE_UP_BIC;
+	else
+		hscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	if (ver_scl_mode == SCALE_UP)
+		vscl_filter_mode = VOP2_SCALE_UP_BIL;
+	else
+		vscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	/*
+	 * RK3568 VOP Esmart/Smart dsp_w should be even pixel
+	 * at scale down mode
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if ((hor_scl_mode == SCALE_DOWN) && (dst_w & 0x1)) {
+			drm_dbg(vop2->drm, "%s dst_w[%d] should align as 2 pixel\n",
+				win->data->name, dst_w);
+			dst_w++;
+		}
+	}
+
+	val = vop2_scale_factor(src_w, dst_w);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_X, val);
+	val = vop2_scale_factor(src_h, dst_h);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_Y, val);
+
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT4, gt4);
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT2, gt2);
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HOR_SCL_MODE, hor_scl_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VER_SCL_MODE, ver_scl_mode);
+
+	if (vop2_cluster_window(win))
+		return;
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HSCL_FILTER_MODE, hscl_filter_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VSCL_FILTER_MODE, vscl_filter_mode);
+
+	if (info->is_yuv) {
+		src_w /= info->hsub;
+		src_h /= info->vsub;
+
+		gt4 = gt2 = 0;
+
+		if (src_h >= (4 * dst_h)) {
+			gt4 = 1;
+			src_h >>= 2;
+		} else if (src_h >= (2 * dst_h)) {
+			gt2 = 1;
+			src_h >>= 1;
+		}
+
+		hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+		ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+		val = vop2_scale_factor(src_w, dst_w);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_X, val);
+
+		val = vop2_scale_factor(src_h, dst_h);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_Y, val);
+
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT4, gt4);
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT2, gt2);
+		vop2_win_write(win, VOP2_WIN_CBCR_HOR_SCL_MODE, hor_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VER_SCL_MODE, ver_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_HSCL_FILTER_MODE, hscl_filter_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VSCL_FILTER_MODE, vscl_filter_mode);
+	}
+}
+
+static int vop2_convert_csc_mode(int csc_mode)
+{
+	switch (csc_mode) {
+	case V4L2_COLORSPACE_SMPTE170M:
+	case V4L2_COLORSPACE_470_SYSTEM_M:
+	case V4L2_COLORSPACE_470_SYSTEM_BG:
+		return CSC_BT601L;
+	case V4L2_COLORSPACE_REC709:
+	case V4L2_COLORSPACE_SMPTE240M:
+	case V4L2_COLORSPACE_DEFAULT:
+		return CSC_BT709L;
+	case V4L2_COLORSPACE_JPEG:
+		return CSC_BT601F;
+	case V4L2_COLORSPACE_BT2020:
+		return CSC_BT2020;
+	default:
+		return CSC_BT709L;
+	}
+}
+
+/*
+ * colorspace path:
+ *      Input        Win csc                     Output
+ * 1. YUV(2020)  --> Y2R->2020To709->R2Y   --> YUV_OUTPUT(601/709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 2. YUV(2020)  --> bypasss               --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 3. YUV(2020)  --> Y2R->2020To709        --> RGB_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 4. YUV(601/709)-> Y2R->709To2020->R2Y   --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 5. YUV(601/709)-> bypass                --> YUV_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 6. YUV(601/709)-> bypass                --> YUV_OUTPUT(601)
+ *    RGB        --> R2Y(601)             __/
+ *
+ * 7. YUV        --> Y2R(709)              --> RGB_OUTPUT(709)
+ *    RGB        --> bypass               __/
+ *
+ * 8. RGB        --> 709To2020->R2Y        --> YUV_OUTPUT(2020)
+ *
+ * 9. RGB        --> R2Y(709)              --> YUV_OUTPUT(709)
+ *
+ * 10. RGB       --> R2Y(601)              --> YUV_OUTPUT(601)
+ *
+ * 11. RGB       --> bypass                --> RGB_OUTPUT(709)
+ */
+
+static void vop2_setup_csc_mode(struct vop2_video_port *vp,
+				struct vop2_win *win,
+				struct drm_plane_state *pstate)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(vp->crtc.state);
+	int is_input_yuv = pstate->fb->format->is_yuv;
+	int is_output_yuv = is_yuv_output(vcstate->bus_format);
+	int input_csc = V4L2_COLORSPACE_DEFAULT;
+	int output_csc = vcstate->color_space;
+	bool r2y_en, y2r_en;
+	int csc_mode;
+
+	if (is_input_yuv && !is_output_yuv) {
+		y2r_en = true;
+		r2y_en = false;
+		csc_mode = vop2_convert_csc_mode(input_csc);
+	} else if (!is_input_yuv && is_output_yuv) {
+		y2r_en = false;
+		r2y_en = true;
+		csc_mode = vop2_convert_csc_mode(output_csc);
+	} else {
+		y2r_en = false;
+		r2y_en = false;
+		csc_mode = false;
+	}
+
+	vop2_win_write(win, VOP2_WIN_Y2R_EN, y2r_en);
+	vop2_win_write(win, VOP2_WIN_R2Y_EN, r2y_en);
+	vop2_win_write(win, VOP2_WIN_CSC_MODE, csc_mode);
+}
+
+static void vop2_crtc_enable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irq << 16 | irq);
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16 | irq);
+}
+
+static void vop2_crtc_disable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16);
+}
+
+static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = clk_prepare_enable(vop2->hclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable hclk - %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(vop2->aclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable aclk - %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	clk_disable_unprepare(vop2->hclk);
+
+	return ret;
+}
+
+static void vop2_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(vop2->dev);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to get pm runtime: %d\n", ret);
+		return;
+	}
+
+	ret = vop2_core_clks_prepare_enable(vop2);
+	if (ret) {
+		pm_runtime_put_sync(vop2->dev);
+		return;
+	}
+
+	if (vop2->data->soc_id == 3566)
+		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
+
+	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+
+	/*
+	 * Disable auto gating, this is a workaround to
+	 * avoid display image shift when a window enabled.
+	 */
+	regmap_clear_bits(vop2->map, RK3568_SYS_AUTO_GATING_CTRL,
+			  RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN);
+
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS0_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+}
+
+static void vop2_disable(struct vop2 *vop2)
+{
+	pm_runtime_put_sync(vop2->dev);
+
+	clk_disable_unprepare(vop2->aclk);
+	clk_disable_unprepare(vop2->hclk);
+}
+
+static void vop2_crtc_atomic_disable(struct drm_crtc *crtc,
+				     struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	int ret;
+
+	vop2_lock(vop2);
+
+	drm_crtc_vblank_off(crtc);
+
+	/*
+	 * Vop standby will take effect at end of current frame,
+	 * if dsp hold valid irq happen, it means standby complete.
+	 *
+	 * we must wait standby complete when we want to disable aclk,
+	 * if not, memory bus maybe dead.
+	 */
+	reinit_completion(&vp->dsp_hold_completion);
+
+	vop2_crtc_enable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, RK3568_VP_DSP_CTRL__STANDBY);
+
+	ret = wait_for_completion_timeout(&vp->dsp_hold_completion, msecs_to_jiffies(50));
+	if (!ret)
+		drm_info(vop2->drm, "wait for vp%d dsp_hold timeout\n", vp->id);
+
+	vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	clk_disable_unprepare(vp->dclk);
+
+	vop2->enable_count--;
+
+	if (!vop2->enable_count)
+		vop2_disable(vop2);
+
+	vop2_unlock(vop2);
+
+	if (crtc->state->event && !crtc->state->active) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+
+		crtc->state->event = NULL;
+	}
+}
+
+static int vop2_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *astate)
+{
+	struct drm_plane_state *pstate = drm_atomic_get_new_plane_state(astate, plane);
+	struct drm_framebuffer *fb = pstate->fb;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct drm_crtc_state *cstate;
+	struct vop2_video_port *vp;
+	struct vop2 *vop2;
+	const struct vop2_data *vop2_data;
+	struct drm_rect *dest = &pstate->dst;
+	struct drm_rect *src = &pstate->src;
+	int min_scale = FRAC_16_16(1, 8);
+	int max_scale = FRAC_16_16(8, 1);
+	int format;
+	int ret;
+
+	if (!crtc)
+		return 0;
+
+	vp = to_vop2_video_port(crtc);
+	vop2 = vp->vop2;
+	vop2_data = vop2->data;
+
+	cstate = drm_atomic_get_existing_crtc_state(pstate->state, crtc);
+	if (WARN_ON(!cstate))
+		return -EINVAL;
+
+	ret = drm_atomic_helper_check_plane_state(pstate, cstate,
+						  min_scale, max_scale,
+						  true, true);
+	if (ret)
+		return ret;
+
+	if (!pstate->visible)
+		return 0;
+
+	format = vop2_convert_format(fb->format->format);
+	if (format < 0)
+		return format;
+
+	if (drm_rect_width(src) >> 16 < 4 || drm_rect_height(src) >> 16 < 4 ||
+	    drm_rect_width(dest) < 4 || drm_rect_width(dest) < 4) {
+		drm_err(vop2->drm, "Invalid size: %dx%d->%dx%d, min size is 4x4\n",
+			  drm_rect_width(src) >> 16, drm_rect_height(src) >> 16,
+			  drm_rect_width(dest), drm_rect_height(dest));
+		pstate->visible = false;
+		return 0;
+	}
+
+	if (drm_rect_width(src) >> 16 > vop2_data->max_input.width ||
+	    drm_rect_height(src) >> 16 > vop2_data->max_input.height) {
+		drm_err(vop2->drm, "Invalid source: %dx%d. max input: %dx%d\n",
+			  drm_rect_width(src) >> 16,
+			  drm_rect_height(src) >> 16,
+			  vop2_data->max_input.width,
+			  vop2_data->max_input.height);
+		return -EINVAL;
+	}
+
+	/*
+	 * Src.x1 can be odd when do clip, but yuv plane start point
+	 * need align with 2 pixel.
+	 */
+	if (fb->format->is_yuv && ((pstate->src.x1 >> 16) % 2)) {
+		drm_err(vop2->drm, "Invalid Source: Yuv format not support odd xpos\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void vop2_plane_atomic_disable(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *old_pstate = drm_atomic_get_old_plane_state(state, plane);
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	drm_dbg(vop2->drm, "%s disable\n", win->data->name);
+
+	if (!old_pstate->crtc)
+		return;
+
+	vop2_win_disable(win);
+	vop2_win_write(win, VOP2_WIN_YUV_CLIP, 0);
+}
+
+/*
+ * The color key is 10 bit, so all format should
+ * convert to 10 bit here.
+ */
+static void vop2_plane_setup_color_key(struct drm_plane *plane, uint32_t color_key)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_framebuffer *fb = pstate->fb;
+	struct vop2_win *win = to_vop2_win(plane);
+	uint32_t color_key_en = 0;
+	uint32_t r = 0;
+	uint32_t g = 0;
+	uint32_t b = 0;
+
+	if (!(color_key & VOP2_COLOR_KEY_MASK) || fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, 0);
+		return;
+	}
+
+	switch (fb->format->format) {
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		r = (color_key & 0xf800) >> 11;
+		g = (color_key & 0x7e0) >> 5;
+		b = (color_key & 0x1f);
+		r <<= 5;
+		g <<= 4;
+		b <<= 5;
+		color_key_en = 1;
+		break;
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		r = (color_key & 0xff0000) >> 16;
+		g = (color_key & 0xff00) >> 8;
+		b = (color_key & 0xff);
+		r <<= 2;
+		g <<= 2;
+		b <<= 2;
+		color_key_en = 1;
+		break;
+	}
+
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, color_key_en);
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY, (r << 20) | (g << 10) | b);
+}
+
+static void vop2_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
+	struct vop2 *vop2 = win->vop2;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t actual_w, actual_h, dsp_w, dsp_h;
+	uint32_t act_info, dsp_info;
+	uint32_t format;
+	uint32_t afbc_format;
+	uint32_t rb_swap;
+	uint32_t uv_swap;
+	struct drm_rect *src = &pstate->src;
+	struct drm_rect *dest = &pstate->dst;
+	uint32_t afbc_tile_num;
+	uint32_t transform_offset;
+	bool dither_up;
+	bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
+	bool ymirror = pstate->rotation & DRM_MODE_REFLECT_Y;
+	bool rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
+	bool rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
+	struct rockchip_gem_object *rk_obj;
+	unsigned long offset;
+	bool afbc_en;
+	dma_addr_t yrgb_mst;
+	dma_addr_t uv_mst;
+
+	/*
+	 * can't update plane when vop2 is disabled.
+	 */
+	if (WARN_ON(!crtc))
+		return;
+
+	if (!pstate->visible) {
+		vop2_plane_atomic_disable(plane, state);
+		return;
+	}
+
+	afbc_en = rockchip_afbc(plane, fb->modifier);
+
+	offset = (src->x1 >> 16) * fb->format->cpp[0];
+
+	/*
+	 * AFBC HDR_PTR must set to the zero offset of the framebuffer.
+	 */
+	if (afbc_en)
+		offset = 0;
+	else if (pstate->rotation & DRM_MODE_REFLECT_Y)
+		offset += ((src->y2 >> 16) - 1) * fb->pitches[0];
+	else
+		offset += (src->y1 >> 16) * fb->pitches[0];
+
+	rk_obj = to_rockchip_obj(fb->obj[0]);
+
+	yrgb_mst = rk_obj->dma_addr + offset + fb->offsets[0];
+	if (fb->format->is_yuv) {
+		int hsub = fb->format->hsub;
+		int vsub = fb->format->vsub;
+
+		offset = (src->x1 >> 16) * fb->format->cpp[1] / hsub;
+		offset += (src->y1 >> 16) * fb->pitches[1] / vsub;
+
+		if ((pstate->rotation & DRM_MODE_REFLECT_Y) && !afbc_en)
+			offset += fb->pitches[1] * ((pstate->src_h >> 16) - 2)  / vsub;
+
+		rk_obj = to_rockchip_obj(fb->obj[0]);
+		uv_mst = rk_obj->dma_addr + offset + fb->offsets[1];
+	}
+
+	actual_w = drm_rect_width(src) >> 16;
+	actual_h = drm_rect_height(src) >> 16;
+	dsp_w = drm_rect_width(dest);
+
+	if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
+			  vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
+		dsp_w = adjusted_mode->hdisplay - dest->x1;
+		if (dsp_w < 4)
+			dsp_w = 4;
+		actual_w = dsp_w * actual_w / drm_rect_width(dest);
+	}
+
+	dsp_h = drm_rect_height(dest);
+
+	if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
+			  vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
+		dsp_h = adjusted_mode->vdisplay - dest->y1;
+		if (dsp_h < 4)
+			dsp_h = 4;
+		actual_h = dsp_h * actual_h / drm_rect_height(dest);
+	}
+
+	/*
+	 * This is workaround solution for IC design:
+	 * esmart can't support scale down when actual_w % 16 == 1.
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if (actual_w > dsp_w && (actual_w & 0xf) == 1) {
+			drm_err(vop2->drm, "vp%d %s act_w[%d] MODE 16 == 1\n", vp->id, win->data->name, actual_w);
+			actual_w -= 1;
+		}
+	}
+
+	if (afbc_en && actual_w % 4) {
+		drm_err(vop2->drm, "vp%d %s actual_w[%d] should align as 4 pixel when enable afbc\n",
+			  vp->id, win->data->name, actual_w);
+		actual_w = ALIGN_DOWN(actual_w, 4);
+	}
+
+	act_info = (actual_h - 1) << 16 | ((actual_w - 1) & 0xffff);
+	dsp_info = (dsp_h - 1) << 16 | ((dsp_w - 1) & 0xffff);
+
+	format = vop2_convert_format(fb->format->format);
+
+	drm_dbg(vop2->drm, "vp%d update %s[%dx%d->%dx%d@%dx%d] fmt[%p4cc_%s] addr[%pad]\n",
+		      vp->id, win->data->name, actual_w, actual_h, dsp_w, dsp_h,
+		      dest->x1, dest->y1,
+		      &fb->format->format,
+		      afbc_en ? "AFBC" : "", &yrgb_mst);
+
+	if (afbc_en) {
+		uint32_t stride;
+
+		/* the afbc superblock is 16 x 16 */
+		afbc_format = vop2_convert_afbc_format(fb->format->format);
+
+		/* Enable color transform for YTR */
+		if (fb->modifier & AFBC_FORMAT_MOD_YTR)
+			afbc_format |= (1 << 4);
+
+		afbc_tile_num = ALIGN(actual_w, 16) >> 4;
+
+		/*
+		 * AFBC pic_vir_width is count by pixel, this is different
+		 * with WIN_VIR_STRIDE.
+		 */
+		stride = (fb->pitches[0] << 3) / bpp;
+		if ((stride & 0x3f) && (xmirror || rotate_90 || rotate_270))
+			drm_err(vop2->drm, "vp%d %s stride[%d] must align as 64 pixel when enable xmirror/rotate_90/rotate_270[0x%x]\n",
+				  vp->id, win->data->name, stride, pstate->rotation);
+
+		rb_swap = vop2_afbc_rb_swap(fb->format->format);
+		uv_swap = vop2_afbc_uv_swap(fb->format->format);
+		/*
+		 * This is a workaround for crazy IC design, Cluster
+		 * and Esmart/Smart use different format configuration map:
+		 * YUV420_10BIT: 0x10 for Cluster, 0x14 for Esmart/Smart.
+		 *
+		 * This is one thing we can make the convert simple:
+		 * AFBCD decode all the YUV data to YUV444. So we just
+		 * set all the yuv 10 bit to YUV444_10.
+		 */
+		if (fb->format->is_yuv && (bpp == 10))
+			format = VOP2_CLUSTER_YUV444_10;
+
+		if (vop2_cluster_window(win))
+			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
+		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
+		vop2_win_write(win, VOP2_WIN_AFBC_RB_SWAP, rb_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
+		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
+		if (pstate->rotation & (DRM_MODE_ROTATE_270 | DRM_MODE_ROTATE_90)) {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 0);
+			transform_offset = vop2_afbc_transform_offset(pstate, false);
+		} else {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 1);
+			transform_offset = vop2_afbc_transform_offset(pstate, true);
+		}
+		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_SIZE, act_info);
+		vop2_win_write(win, VOP2_WIN_AFBC_TRANSFORM_OFFSET, transform_offset);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_OFFSET, ((src->x1 >> 16) | src->y1));
+		vop2_win_write(win, VOP2_WIN_AFBC_DSP_OFFSET, (dest->x1 | (dest->y1 << 16)));
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_VIR_WIDTH, stride);
+		vop2_win_write(win, VOP2_WIN_AFBC_TILE_NUM, afbc_tile_num);
+		vop2_win_write(win, VOP2_WIN_XMIRROR, xmirror);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_270, rotate_270);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_90, rotate_90);
+	} else {
+		vop2_win_write(win, VOP2_WIN_YRGB_VIR, DIV_ROUND_UP(fb->pitches[0], 4));
+	}
+
+	vop2_win_write(win, VOP2_WIN_YMIRROR, ymirror);
+
+	if (rotate_90 || rotate_270) {
+		act_info = swahw32(act_info);
+		actual_w = drm_rect_height(src) >> 16;
+		actual_h = drm_rect_width(src) >> 16;
+	}
+
+	vop2_win_write(win, VOP2_WIN_FORMAT, format);
+	vop2_win_write(win, VOP2_WIN_YRGB_MST, yrgb_mst);
+
+	rb_swap = vop2_win_rb_swap(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_RB_SWAP, rb_swap);
+	if (!vop2_cluster_window(win)) {
+		uv_swap = vop2_win_uv_swap(fb->format->format);
+		vop2_win_write(win, VOP2_WIN_UV_SWAP, uv_swap);
+	}
+
+	if (fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_UV_VIR, DIV_ROUND_UP(fb->pitches[1], 4));
+		vop2_win_write(win, VOP2_WIN_UV_MST, uv_mst);
+	}
+
+	vop2_setup_scale(vop2, win, actual_w, actual_h, dsp_w, dsp_h, fb->format->format);
+	if (!vop2_cluster_window(win))
+		vop2_plane_setup_color_key(plane, 0);
+	vop2_win_write(win, VOP2_WIN_ACT_INFO, act_info);
+	vop2_win_write(win, VOP2_WIN_DSP_INFO, dsp_info);
+	vop2_win_write(win, VOP2_WIN_DSP_ST, dest->y1 << 16 | (dest->x1 & 0xffff));
+
+	vop2_setup_csc_mode(vp, win, pstate);
+
+	dither_up = vop2_win_dither_up(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_DITHER_UP, dither_up);
+
+	vop2_win_write(win, VOP2_WIN_ENABLE, 1);
+
+	if (vop2_cluster_window(win)) {
+		int lb_mode = vop2_get_cluster_lb_mode(win, pstate);
+
+		vop2_win_write(win, VOP2_WIN_CLUSTER_LB_MODE, lb_mode);
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 1);
+	}
+}
+
+static const struct drm_plane_helper_funcs vop2_plane_helper_funcs = {
+	.atomic_check = vop2_plane_atomic_check,
+	.atomic_update = vop2_plane_atomic_update,
+	.atomic_disable = vop2_plane_atomic_disable,
+};
+
+static const struct drm_plane_funcs vop2_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy = drm_plane_cleanup,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+	.format_mod_supported = rockchip_vop2_mod_supported,
+};
+
+static int vop2_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_enable_irq(vp, VP_INT_FS_FIELD);
+
+	return 0;
+}
+
+static void vop2_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_disable_irq(vp, VP_INT_FS_FIELD);
+}
+
+static bool vop2_crtc_mode_fixup(struct drm_crtc *crtc,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj_mode)
+{
+	drm_mode_set_crtcinfo(adj_mode, CRTC_INTERLACE_HALVE_V | CRTC_STEREO_DOUBLE);
+
+	return true;
+}
+
+static void vop2_dither_setup(struct drm_crtc *crtc, uint32_t *dsp_ctrl)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	switch (vcstate->bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		*dsp_ctrl |= RGB888_TO_RGB666;
+		break;
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+		break;
+	default:
+		break;
+	}
+
+	if (vcstate->output_mode != ROCKCHIP_OUT_MODE_AAAA)
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+
+	*dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL,
+				DITHER_DOWN_ALLEGRO);
+}
+
+static void vop2_post_config(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint32_t left_margin = 100, right_margin = 100, top_margin = 100, bottom_margin = 100;
+	uint16_t hsize = hdisplay * (left_margin + right_margin) / 200;
+	uint16_t vsize = vdisplay * (top_margin + bottom_margin) / 200;
+	uint16_t hact_end, vact_end;
+	uint32_t val;
+
+	vsize = rounddown(vsize, 2);
+	hsize = rounddown(hsize, 2);
+	hact_st += hdisplay * (100 - left_margin) / 200;
+	hact_end = hact_st + hsize;
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_HACT_INFO, val);
+	vact_st += vdisplay * (100 - top_margin) / 200;
+	vact_end = vact_st + vsize;
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO, val);
+	val = scl_cal_scale2(vdisplay, vsize) << 16;
+	val |= scl_cal_scale2(hdisplay, hsize);
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_FACTOR_YRGB, val);
+
+	val = 0;
+	if (hdisplay != hsize)
+		val |= RK3568_VP_POST_SCL_CTRL__HSCALEDOWN;
+	if (vdisplay != vsize)
+		val |= RK3568_VP_POST_SCL_CTRL__VSCALEDOWN;
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_CTRL, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vsize;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO_F1, val);
+	}
+
+	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
+}
+
+static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
+				uint32_t polflags)
+{
+	struct vop2 *vop2 = vp->vop2;
+	uint32_t die, dip;
+
+	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
+	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
+
+	switch (id) {
+	case RK3568_VOP2_EP_RGB:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_RGB_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_RGB |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_RGB_MUX, vp->id);
+		if (polflags & POLFLAG_DCLK_INV)
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16) | BIT(3));
+		else
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16));
+		break;
+	case RK3568_VOP2_EP_HDMI:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_HDMI_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_HDMI |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_HDMI_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_EDP:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_EDP_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_EDP |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_EDP_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_MIPI0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_MIPI1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	default:
+		return;
+	};
+
+	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
+
+	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
+	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
+}
+
+static int us_to_vertical_line(struct drm_display_mode *mode, int us)
+{
+	return us * mode->clock / mode->htotal / 1000;
+}
+
+static void vop2_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	const struct vop2_data *vop2_data = vop2->data;
+	const struct vop2_video_port_data *vp_data = &vop2_data->vp[vp->id];
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	unsigned long clock = mode->crtc_clock * 1000;
+	uint16_t hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t htotal = mode->crtc_htotal;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t hact_end = hact_st + hdisplay;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint16_t vact_end = vact_st + vdisplay;
+	uint8_t out_mode;
+	uint32_t dsp_ctrl = 0;
+	int act_end;
+	uint32_t val, polflags;
+	int ret;
+	struct drm_encoder *encoder;
+
+	drm_dbg(vop2->drm, "Update mode to %dx%d%s%d, type: %d for vp%d\n",
+		hdisplay, vdisplay, mode->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "p",
+		drm_mode_vrefresh(mode), vcstate->output_type, vp->id);
+
+	vop2_lock(vop2);
+
+	ret = clk_prepare_enable(vp->dclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable dclk for video port%d - %d\n",
+			      vp->id, ret);
+		return;
+	}
+
+	if (!vop2->enable_count)
+		vop2_enable(vop2);
+
+	vop2->enable_count++;
+
+	vop2_crtc_enable_irq(vp, VP_INT_POST_BUF_EMPTY);
+
+	polflags = 0;
+	if (vcstate->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+		polflags |= POLFLAG_DCLK_INV;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		polflags |= BIT(HSYNC_POSITIVE);
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		polflags |= BIT(VSYNC_POSITIVE);
+
+	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
+		struct device_node *node, *parent;
+
+		parent = of_get_parent(encoder->port);
+
+		for_each_endpoint_of_node(parent, node) {
+			struct device_node *crtc_port = of_graph_get_remote_port(node);
+			struct device_node *epn;
+			struct of_endpoint endpoint;
+
+			if (crtc->port != crtc_port) {
+				of_node_put(crtc_port);
+				continue;
+			}
+
+			of_node_put(crtc_port);
+
+			epn = of_graph_get_remote_endpoint(node);
+			of_graph_parse_endpoint(epn, &endpoint);
+			of_node_put(epn);
+
+			drm_dbg(vop2->drm, "vp%d is connected to %s, id %d\n",
+					   vp->id, encoder->name, endpoint.id);
+			rk3568_set_intf_mux(vp, endpoint.id, polflags);
+		}
+		of_node_put(parent);
+	}
+
+	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
+	     !(vp_data->feature & VOP_FEATURE_OUTPUT_10BIT))
+		out_mode = ROCKCHIP_OUT_MODE_P888;
+	else
+		out_mode = vcstate->output_mode;
+
+	dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__OUT_MODE, out_mode);
+
+	if (vop2_output_uv_swap(vcstate->bus_format, vcstate->output_mode))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_RB_SWAP;
+
+	if (is_yuv_output(vcstate->bus_format))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y;
+
+	vop2_dither_setup(crtc, &dsp_ctrl);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_HTOTAL_HS_END, (htotal << 16) | hsync_len);
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_HACT_ST_END, val);
+
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vdisplay;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END_F1, val);
+
+		val = vtotal << 16 | (vtotal + vsync_len);
+		vop2_vp_write(vp, RK3568_VP_DSP_VS_ST_END_F1, val);
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_INTERLACE;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_FILED_POL;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__P2I_EN;
+		vtotal += vtotal + 1;
+		act_end = vact_end_f1;
+	} else {
+		act_end = vact_end;
+	}
+
+	vop2_writel(vop2, RK3568_VP_LINE_FLAG(vp->id),
+		    (act_end - us_to_vertical_line(mode, 0)) << 16 | act_end);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_VTOTAL_VS_END, vtotal << 16 | vsync_len);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__CORE_DCLK_DIV;
+		clock *= 2;
+	}
+
+	vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0);
+
+	clk_set_rate(vp->dclk, clock);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
+
+	drm_crtc_vblank_on(crtc);
+
+	vop2_unlock(vop2);
+}
+
+static int vop2_crtc_atomic_check(struct drm_crtc *crtc,
+				  struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_plane *plane;
+	int nplanes = 0;
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+	drm_atomic_crtc_state_for_each_plane(plane, crtc_state)
+		nplanes++;
+
+	if (nplanes > vp->nlayers)
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool is_opaque(uint16_t alpha)
+{
+	return (alpha >> 8) == 0xff;
+}
+
+static void vop2_parse_alpha(struct vop2_alpha_config *alpha_config,
+			     struct vop2_alpha *alpha)
+{
+	int src_glb_alpha_en = is_opaque(alpha_config->src_glb_alpha_value) ? 0 : 1;
+	int dst_glb_alpha_en = is_opaque(alpha_config->dst_glb_alpha_value) ? 0 : 1;
+	int src_color_mode = alpha_config->src_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+	int dst_color_mode = alpha_config->dst_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+
+	alpha->src_color_ctrl.val = 0;
+	alpha->dst_color_ctrl.val = 0;
+	alpha->src_alpha_ctrl.val = 0;
+	alpha->dst_alpha_ctrl.val = 0;
+
+	if (!alpha_config->src_pixel_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	else if (alpha_config->src_pixel_alpha_en && !src_glb_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+
+	alpha->src_color_ctrl.bits.alpha_en = 1;
+
+	if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_GLOBAL) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	} else if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_PER_PIX) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_ONE;
+	} else {
+		alpha->src_color_ctrl.bits.color_mode = ALPHA_SRC_PRE_MUL;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	}
+	alpha->src_color_ctrl.bits.glb_alpha = alpha_config->src_glb_alpha_value >> 8;
+	alpha->src_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+
+	alpha->dst_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->dst_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->dst_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	alpha->dst_color_ctrl.bits.glb_alpha = alpha_config->dst_glb_alpha_value >> 8;
+	alpha->dst_color_ctrl.bits.color_mode = dst_color_mode;
+	alpha->dst_color_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+
+	alpha->src_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_alpha_ctrl.bits.blend_mode = alpha->src_color_ctrl.bits.blend_mode;
+	alpha->src_alpha_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->src_alpha_ctrl.bits.factor_mode = ALPHA_ONE;
+
+	alpha->dst_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	if (alpha_config->dst_pixel_alpha_en && !dst_glb_alpha_en)
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+	alpha->dst_alpha_ctrl.bits.alpha_cal_mode = ALPHA_NO_SATURATION;
+	alpha->dst_alpha_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+}
+
+static int vop2_find_start_mixer_id_for_vp(struct vop2 *vop2, uint8_t port_id)
+{
+	struct vop2_video_port *vp;
+	int used_layer = 0;
+	int i;
+
+	for (i = 0; i < port_id; i++) {
+		vp = &vop2->vps[i];
+		used_layer += hweight32(vp->win_mask);
+	}
+
+	return used_layer;
+}
+
+static void vop2_setup_cluster_alpha(struct vop2 *vop2, struct vop2_win *main_win)
+{
+	uint32_t offset = (main_win->data->phys_id * 0x10);
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane_state *bottom_win_pstate;
+	bool src_pixel_alpha_en = false;
+	uint16_t src_glb_alpha_val, dst_glb_alpha_val;
+	bool premulti_en = false;
+	bool swap = false;
+
+	/* At one win mode, win0 is dst/bottom win, and win1 is a all zero src/top win */
+	bottom_win_pstate = main_win->base.state;
+	src_glb_alpha_val = 0;
+	dst_glb_alpha_val = main_win->base.state->alpha;
+
+	if (!bottom_win_pstate->fb)
+		return;
+
+	alpha_config.src_premulti_en = premulti_en;
+	alpha_config.dst_premulti_en = false;
+	alpha_config.src_pixel_alpha_en = src_pixel_alpha_en;
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+	alpha_config.src_glb_alpha_value = src_glb_alpha_val;
+	alpha_config.dst_glb_alpha_value = dst_glb_alpha_val;
+	vop2_parse_alpha(&alpha_config, &alpha);
+
+	alpha.src_color_ctrl.bits.src_dst_swap = swap;
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL + offset,
+		    alpha.src_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_COLOR_CTRL + offset,
+		    alpha.dst_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL + offset,
+		    alpha.src_alpha_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL + offset,
+		    alpha.dst_alpha_ctrl.val);
+}
+
+static void vop2_setup_alpha(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_framebuffer *fb;
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane *plane;
+	int pixel_alpha_en;
+	int premulti_en, gpremulti_en = 0;
+	int mixer_id;
+	uint32_t offset;
+	bool bottom_layer_alpha_en = false;
+	uint32_t dst_global_alpha = DRM_BLEND_ALPHA_OPAQUE;
+
+	mixer_id = vop2_find_start_mixer_id_for_vp(vop2, vp->id);
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		if (plane->state->normalized_zpos == 0 &&
+		    !is_opaque(plane->state->alpha) &&
+		    !vop2_cluster_window(win)) {
+			/*
+			 * If bottom layer have global alpha effect [except cluster layer,
+			 * because cluster have deal with bottom layer global alpha value
+			 * at cluster mix], bottom layer mix need deal with global alpha.
+			 */
+			bottom_layer_alpha_en = true;
+			dst_global_alpha = plane->state->alpha;
+		}
+	}
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+		int zpos = plane->state->normalized_zpos;
+
+		if (plane->state->pixel_blend_mode == DRM_MODE_BLEND_PREMULTI)
+			premulti_en = 1;
+		else
+			premulti_en = 0;
+
+		plane = &win->base;
+		fb = plane->state->fb;
+
+		pixel_alpha_en = fb->format->has_alpha;
+
+		alpha_config.src_premulti_en = premulti_en;
+
+		if (bottom_layer_alpha_en && zpos == 1) {
+			gpremulti_en = premulti_en;
+			/* Cd = Cs + (1 - As) * Cd * Agd */
+			alpha_config.dst_premulti_en = false;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = dst_global_alpha;
+		} else if (vop2_cluster_window(win)) {
+			/* Mix output data only have pixel alpha */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		} else {
+			/* Cd = Cs + (1 - As) * Cd */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		}
+
+		vop2_parse_alpha(&alpha_config, &alpha);
+
+		offset = (mixer_id + zpos - 1) * 0x10;
+		vop2_writel(vop2, RK3568_MIX0_SRC_COLOR_CTRL + offset,
+			    alpha.src_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_COLOR_CTRL + offset,
+			    alpha.dst_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_SRC_ALPHA_CTRL + offset,
+			    alpha.src_alpha_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_ALPHA_CTRL + offset,
+			    alpha.dst_alpha_ctrl.val);
+	}
+
+	if (vp->id == 0) {
+		if (bottom_layer_alpha_en) {
+			/* Transfer pixel alpha to hdr mix */
+			alpha_config.src_premulti_en = gpremulti_en;
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			vop2_parse_alpha(&alpha_config, &alpha);
+
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL,
+				alpha.src_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_COLOR_CTRL,
+				alpha.dst_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_SRC_ALPHA_CTRL,
+				alpha.src_alpha_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_ALPHA_CTRL,
+				alpha.dst_alpha_ctrl.val);
+		} else {
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL, 0);
+		}
+	}
+}
+
+#define NR_VPS		3
+#define NR_MIXERS	6
+
+static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+	uint32_t layer_sel = 0;
+	uint32_t port_sel;
+	int nlayer, ofs;
+	struct drm_display_mode *adjusted_mode;
+	uint16_t hsync_len;
+	uint16_t hdisplay;
+	uint32_t bg_dly;
+	uint32_t pre_scan_dly;
+	int i;
+	struct vop2_video_port *vp0 = &vop2->vps[0];
+	struct vop2_video_port *vp1 = &vop2->vps[1];
+	struct vop2_video_port *vp2 = &vop2->vps[2];
+
+	adjusted_mode = &vp->crtc.state->adjusted_mode;
+	hsync_len = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
+	hdisplay = adjusted_mode->crtc_hdisplay;
+
+	bg_dly = vp->data->pre_scan_max_dly[3];
+	vop2_writel(vop2, RK3568_VP_BG_MIX_CTRL(vp->id),
+			    FIELD_PREP(RK3568_VP_BG_MIX_CTRL__BG_DLY, bg_dly));
+
+	pre_scan_dly = ((bg_dly + (hdisplay >> 1) - 1) << 16) | hsync_len;
+	vop2_vp_write(vp, RK3568_VP_PRE_SCAN_HTIMING, pre_scan_dly);
+
+	vop2_writel(vop2, RK3568_OVL_CTRL, 0);
+	port_sel = vop2_readl(vop2, RK3568_OVL_PORT_SEL);
+	port_sel &= RK3568_OVL_PORT_SEL__SEL_PORT;
+
+	if (vp0->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX,
+				     vp0->nlayers - 1);
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX, 8);
+
+	if (vp1->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX,
+				     (vp0->nlayers + vp1->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	if (vp2->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT2_MUX,
+			(vp2->nlayers + vp1->nlayers + vp0->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	layer_sel = vop2_readl(vop2, RK3568_OVL_LAYER_SEL);
+
+	ofs = 0;
+	for (i = 0; i < vp->id; i++)
+		ofs += vop2->vps[i].nlayers;
+
+	nlayer = 0;
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART1, vp->id);
+			break;
+		}
+
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, win->data->layer_sel_id);
+		nlayer++;
+	}
+
+	/* configure unused layers to 0x5 (reserved) */
+	for (; nlayer < 3; nlayer++) {
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 5);
+	}
+
+	vop2_writel(vop2, RK3568_OVL_LAYER_SEL, layer_sel);
+	vop2_writel(vop2, RK3568_OVL_PORT_SEL, port_sel);
+	vop2_writel(vop2, RK3568_OVL_CTRL, RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD);
+}
+
+static void vop2_setup_dly_for_windows(struct vop2 *vop2)
+{
+	struct vop2_win *win;
+	int i = 0;
+	uint32_t cdly = 0, sdly = 0;
+
+	for (i = 0; i < vop2->data->win_size; i++) {
+		uint32_t dly;
+
+		win = &vop2->win[i];
+		dly = win->delay;
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_1, dly);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_1, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART0, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART0, dly);
+			break;
+		}
+	}
+
+	vop2_writel(vop2, RK3568_CLUSTER_DLY_NUM, cdly);
+	vop2_writel(vop2, RK3568_SMART_DLY_NUM, sdly);
+}
+
+static void vop2_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+
+	vp->win_mask = 0;
+
+	drm_atomic_crtc_for_each_plane(plane, crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		win->delay = win->data->dly[VOP2_DLY_MODE_DEFAULT];
+
+		vp->win_mask |= BIT(win->data->phys_id);
+
+		if (vop2_cluster_window(win))
+			vop2_setup_cluster_alpha(vop2, win);
+	}
+
+	if (!vp->win_mask)
+		return;
+
+	vop2_setup_layer_mixer(vp);
+	vop2_setup_alpha(vp);
+	vop2_setup_dly_for_windows(vop2);
+}
+
+static void vop2_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	spin_lock_irq(&crtc->dev->event_lock);
+
+	if (crtc->state->event) {
+		WARN_ON(drm_crtc_vblank_get(crtc));
+		vp->event = crtc->state->event;
+		crtc->state->event = NULL;
+	}
+
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_helper_funcs vop2_crtc_helper_funcs = {
+	.mode_fixup = vop2_crtc_mode_fixup,
+	.atomic_check = vop2_crtc_atomic_check,
+	.atomic_begin = vop2_crtc_atomic_begin,
+	.atomic_flush = vop2_crtc_atomic_flush,
+	.atomic_enable = vop2_crtc_atomic_enable,
+	.atomic_disable = vop2_crtc_atomic_disable,
+};
+
+static void vop2_crtc_reset(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	if (crtc->state) {
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
+		kfree(vcstate);
+	}
+
+	vcstate = kzalloc(sizeof(*vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return;
+
+	crtc->state = &vcstate->base;
+	crtc->state->crtc = crtc;
+}
+
+static struct drm_crtc_state *vop2_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate, *old_vcstate;
+
+	old_vcstate = to_rockchip_crtc_state(crtc->state);
+
+	vcstate = kmemdup(old_vcstate, sizeof(*old_vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &vcstate->base);
+
+	return &vcstate->base;
+}
+
+static void vop2_crtc_destroy_state(struct drm_crtc *crtc,
+				    struct drm_crtc_state *state)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(state);
+
+	__drm_atomic_helper_crtc_destroy_state(&vcstate->base);
+	kfree(vcstate);
+}
+
+static const struct drm_crtc_funcs vop2_crtc_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.destroy = drm_crtc_cleanup,
+	.reset = vop2_crtc_reset,
+	.atomic_duplicate_state = vop2_crtc_duplicate_state,
+	.atomic_destroy_state = vop2_crtc_destroy_state,
+	.enable_vblank = vop2_crtc_enable_vblank,
+	.disable_vblank = vop2_crtc_disable_vblank,
+};
+
+static irqreturn_t vop2_isr(int irq, void *data)
+{
+	struct vop2 *vop2 = data;
+	const struct vop2_data *vop2_data = vop2->data;
+	uint32_t axi_irqs[VOP2_SYS_AXI_BUS_NUM];
+	int ret = IRQ_NONE;
+	int i;
+
+	/*
+	 * The irq is shared with the iommu. If the runtime-pm state of the
+	 * vop2-device is disabled the irq has to be targeted at the iommu.
+	 */
+	if (!pm_runtime_get_if_in_use(vop2->dev))
+		return IRQ_NONE;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		struct drm_crtc *crtc = &vp->crtc;
+		uint32_t irqs;
+
+		irqs = vop2_readl(vop2, RK3568_VP_INT_STATUS(vp->id));
+		vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irqs << 16 | irqs);
+
+		if (irqs & VP_INT_DSP_HOLD_VALID) {
+			complete(&vp->dsp_hold_completion);
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_FS_FIELD) {
+			unsigned long flags;
+
+			drm_crtc_handle_vblank(crtc);
+			spin_lock_irqsave(&crtc->dev->event_lock, flags);
+			if (vp->event) {
+				uint32_t val = vop2_readl(vop2, RK3568_REG_CFG_DONE);
+				if (!(val & BIT(vp->id))) {
+					drm_crtc_send_vblank_event(crtc, vp->event);
+					vp->event = NULL;
+					drm_crtc_vblank_put(crtc);
+				}
+			}
+			spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_POST_BUF_EMPTY) {
+			drm_err_ratelimited(vop2->drm,
+					    "POST_BUF_EMPTY irq err at vp%d\n",
+					    vp->id);
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	axi_irqs[0] = vop2_readl(vop2, RK3568_SYS0_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR, axi_irqs[0] << 16 | axi_irqs[0]);
+	axi_irqs[1] = vop2_readl(vop2, RK3568_SYS1_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR, axi_irqs[1] << 16 | axi_irqs[1]);
+
+	for (i = 0; i < ARRAY_SIZE(axi_irqs); i++) {
+		if (axi_irqs[i] & VOP2_INT_BUS_ERRPR) {
+			drm_err_ratelimited(vop2->drm, "BUS_ERROR irq err\n");
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	pm_runtime_put(vop2->dev);
+
+	return ret;
+}
+
+static int vop2_plane_init(struct vop2 *vop2, struct vop2_win *win, unsigned long possible_crtcs)
+{
+	const struct vop2_win_data *win_data = win->data;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | BIT(DRM_MODE_BLEND_PREMULTI) |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
+	int ret;
+
+	ret = drm_universal_plane_init(vop2->drm, &win->base, possible_crtcs,
+				       &vop2_plane_funcs, win_data->formats, win_data->nformats,
+				       win_data->format_modifiers, win->type, win_data->name);
+	if (ret) {
+		drm_err(vop2->drm, "failed to initialize plane %d\n", ret);
+		return ret;
+	}
+
+	drm_plane_helper_add(&win->base, &vop2_plane_helper_funcs);
+
+	if (win->data->supported_rotations)
+		drm_plane_create_rotation_property(&win->base, DRM_MODE_ROTATE_0,
+						   DRM_MODE_ROTATE_0 |
+						   win->data->supported_rotations);
+	drm_plane_create_alpha_property(&win->base);
+	drm_plane_create_blend_mode_property(&win->base, blend_caps);
+	drm_plane_create_zpos_property(&win->base, win->win_id, 0,
+				       vop2->registered_num_wins - 1);
+
+	return 0;
+}
+
+static struct vop2_video_port *get_activated_vp(struct vop2 *vop2, int n)
+{
+	int i, id = 0;
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		if (n == id)
+			return vp;
+		id++;
+	}
+
+	return NULL;
+}
+
+static int vop2_create_crtc(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct drm_device *drm = vop2->drm;
+	struct device *dev = vop2->dev;
+	struct drm_plane *plane;
+	struct device_node *port;
+	struct vop2_video_port *vp;
+	uint32_t possible_crtcs;
+	int i, nvp, nvps = 0;
+	int ret;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		const struct vop2_video_port_data *vp_data;
+		struct device_node *np;
+		char dclk_name[9];
+
+		vp_data = &vop2_data->vp[i];
+		vp = &vop2->vps[i];
+		vp->vop2 = vop2;
+		vp->id = vp_data->id;
+		vp->regs = vp_data->regs;
+		vp->data = vp_data;
+
+		snprintf(dclk_name, sizeof(dclk_name), "dclk_vp%d", vp->id);
+		vp->dclk = devm_clk_get(vop2->dev, dclk_name);
+		if (IS_ERR(vp->dclk)) {
+			drm_err(vop2->drm, "failed to get %s\n", dclk_name);
+			return PTR_ERR(vp->dclk);
+		}
+
+		np = of_graph_get_remote_node(dev->of_node, i, -1);
+		if (!np) {
+			printk("%s: No remote for vp%d\n", __func__, i);
+			continue;
+		}
+		of_node_put(np);
+
+		port = of_graph_get_port_by_id(dev->of_node, i);
+		if (!port) {
+			drm_err(vop2->drm, "no port node found for video_port%d\n", i);
+			return -ENOENT;
+		}
+
+		vp->crtc.port = port;
+		nvps++;
+	}
+
+	nvp = 0;
+	for (i = 0; i < vop2->registered_num_wins; i++) {
+		struct vop2_win *win = &vop2->win[i];
+
+		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
+			vp = get_activated_vp(vop2, nvp);
+
+			if (vp) {
+				possible_crtcs = BIT(nvp);
+				vp->primary_plane = win;
+
+				nvp++;
+			} else {
+				/* change the unused primary window to overlay window */
+				win->type = DRM_PLANE_TYPE_OVERLAY;
+			}
+		}
+
+		if (win->type == DRM_PLANE_TYPE_OVERLAY)
+			possible_crtcs = (1 << vop2_data->nr_vps) - 1;
+
+		ret = vop2_plane_init(vop2, win, possible_crtcs);
+
+		if (ret) {
+			drm_err(vop2->drm, "failed to init plane %s: %d\n", win->data->name, ret);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		plane = &vp->primary_plane->base;
+
+		ret = drm_crtc_init_with_planes(drm, &vp->crtc, plane, NULL, &vop2_crtc_funcs,
+						"video_port%d", vp->id);
+		if (ret) {
+			drm_err(vop2->drm, "crtc init for video_port%d failed\n", i);
+			return ret;
+		}
+
+		drm_crtc_helper_add(&vp->crtc, &vop2_crtc_helper_funcs);
+
+		init_completion(&vp->dsp_hold_completion);
+	}
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		if (vp->crtc.port)
+			vp->nlayers = NR_MIXERS / nvps;
+	}
+
+	return 0;
+}
+
+static void vop2_destroy_crtc(struct drm_crtc *crtc)
+{
+	of_node_put(crtc->port);
+
+	/*
+	 * Destroy CRTC after vop2_plane_destroy() since vop2_disable_plane()
+	 * references the CRTC.
+	 */
+	drm_crtc_cleanup(crtc);
+}
+
+static int vop2_cluster_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_cluster_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 1, 5),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 14, 14),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 18, 18),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_ST, 0, 31),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_CLUSTER_WIN_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_CLUSTER_WIN_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 19, 19),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 8, 8),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 9, 9),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 10, 11),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 14, 15),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 12, 13),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 2, 3),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 28, 28),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 29, 29),
+
+		/* cluster regs */
+		[VOP2_WIN_AFBC_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 1, 1),
+		[VOP2_WIN_CLUSTER_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 0, 0),
+		[VOP2_WIN_CLUSTER_LB_MODE] = REG_FIELD(RK3568_CLUSTER_CTRL, 4, 7),
+
+		/* afbc regs */
+		[VOP2_WIN_AFBC_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 2, 6),
+		[VOP2_WIN_AFBC_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 9, 9),
+		[VOP2_WIN_AFBC_UV_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 10, 10),
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL, 4, 4),
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 7, 7),
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 8, 8),
+		[VOP2_WIN_AFBC_HDR_PTR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_HDR_PTR, 0, 31),
+		[VOP2_WIN_AFBC_PIC_SIZE] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE, 0, 31),
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 0, 15),
+		[VOP2_WIN_AFBC_TILE_NUM] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 16, 31),
+		[VOP2_WIN_AFBC_PIC_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_DSP_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_ROTATE_90] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 0, 0),
+		[VOP2_WIN_AFBC_ROTATE_270] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 1, 1),
+		[VOP2_WIN_XMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 2, 2),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 3, 3),
+		[VOP2_WIN_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_X] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_Y] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT2] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT4] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_cluster_regs); i++)
+		vop2_cluster_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_cluster_regs,
+					    ARRAY_SIZE(vop2_cluster_regs));
+};
+
+static int vop2_esmart_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_esmart_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 1, 5),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 12, 12),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 14, 14),
+		[VOP2_WIN_UV_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 16, 16),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_SMART_REGION0_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_SMART_REGION0_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_SMART_REGION0_DSP_ST, 0, 28),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_SMART_REGION0_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_SMART_REGION0_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 17, 17),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_SMART_CTRL0, 0, 0),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_SMART_CTRL0, 1, 1),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_SMART_CTRL0, 2, 3),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_SMART_CTRL1, 31, 31),
+		[VOP2_WIN_COLOR_KEY] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 0, 29),
+		[VOP2_WIN_COLOR_KEY_EN] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 31, 31),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_SCALE_CBCR_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 0, 15),
+		[VOP2_WIN_SCALE_CBCR_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 16, 31),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 0, 1),
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 2, 3),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 4, 5),
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 6, 7),
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 8, 9),
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 10, 11),
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 12, 13),
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 14, 15),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 16, 17),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 8, 8),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 9, 9),
+		[VOP2_WIN_VSD_CBCR_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 10, 10),
+		[VOP2_WIN_VSD_CBCR_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 11, 11),
+		[VOP2_WIN_XMIRROR] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_LB_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_FORMAT] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_RB_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TILE_NUM] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_SIZE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_DSP_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HDR_PTR] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_270] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_90] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_esmart_regs); i++)
+		vop2_esmart_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_esmart_regs,
+					    ARRAY_SIZE(vop2_esmart_regs));
+};
+
+static int vop2_win_init(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct vop2_win *win;
+	int i, ret;
+
+	for (i = 0; i < vop2_data->win_size; i++) {
+		const struct vop2_win_data *win_data = &vop2_data->win[i];
+
+		win = &vop2->win[i];
+		win->data = win_data;
+		win->type = win_data->type;
+		win->offset = win_data->base;
+		win->win_id = i;
+		win->vop2 = vop2;
+		if (vop2_cluster_window(win))
+			ret = vop2_cluster_init(win);
+		else
+			ret = vop2_esmart_init(win);
+		if (ret)
+			return ret;
+	}
+
+	vop2->registered_num_wins = vop2_data->win_size;
+
+	return 0;
+}
+
+/*
+ * The window registers are only updated when config done is written.
+ * Until that they read back the old value. As we read-modify-write
+ * these registers mark them as non-volatile. This makes sure we read
+ * the new values from the regmap register cache.
+ */
+static const struct regmap_range vop2_nonvolatile_range[] = {
+	regmap_reg_range(0x1000, 0x23ff),
+};
+
+static const struct regmap_access_table vop2_volatile_table = {
+	.no_ranges = vop2_nonvolatile_range,
+	.n_no_ranges = ARRAY_SIZE(vop2_nonvolatile_range),
+};
+
+static const struct regmap_config vop2_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x3000,
+	.name		= "vop2",
+	.volatile_table	= &vop2_volatile_table,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int vop2_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct vop2_data *vop2_data;
+	struct drm_device *drm = data;
+	struct vop2 *vop2;
+	struct resource *res;
+	size_t alloc_size;
+	int ret;
+
+	vop2_data = of_device_get_match_data(dev);
+	if (!vop2_data)
+		return -ENODEV;
+
+	/* Allocate vop2 struct and its vop2_win array */
+	alloc_size = sizeof(*vop2) + sizeof(*vop2->win) * vop2_data->win_size;
+	vop2 = devm_kzalloc(dev, alloc_size, GFP_KERNEL);
+	if (!vop2)
+		return -ENOMEM;
+
+	vop2->dev = dev;
+	vop2->data = vop2_data;
+	vop2->drm = drm;
+
+	dev_set_drvdata(dev, vop2);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!res) {
+		drm_err(vop2->drm, "failed to get vop2 register byname\n");
+		return -EINVAL;
+	}
+
+	vop2->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vop2->regs))
+		return PTR_ERR(vop2->regs);
+	vop2->len = resource_size(res);
+
+	vop2->map = devm_regmap_init_mmio(dev, vop2->regs, &vop2_regmap_config);
+
+	ret = vop2_win_init(vop2);
+	if (ret)
+		return ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gamma_lut");
+	if (res) {
+		vop2->lut_regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(vop2->lut_regs))
+			return PTR_ERR(vop2->lut_regs);
+	}
+
+	vop2->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+
+	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
+	if (IS_ERR(vop2->hclk)) {
+		drm_err(vop2->drm, "failed to get hclk source\n");
+		return PTR_ERR(vop2->hclk);
+	}
+
+	vop2->aclk = devm_clk_get(vop2->dev, "aclk");
+	if (IS_ERR(vop2->aclk)) {
+		drm_err(vop2->drm, "failed to get aclk source\n");
+		return PTR_ERR(vop2->aclk);
+	}
+
+	vop2->irq = platform_get_irq(pdev, 0);
+	if (vop2->irq < 0) {
+		drm_err(vop2->drm, "cannot find irq for vop2\n");
+		return vop2->irq;
+	}
+
+	mutex_init(&vop2->vop2_lock);
+
+	ret = devm_request_irq(dev, vop2->irq, vop2_isr, IRQF_SHARED, dev_name(dev), vop2);
+	if (ret)
+		return ret;
+
+	ret = rockchip_drm_dma_attach_device(vop2->drm, vop2->dev);
+	if (ret) {
+		drm_err(vop2->drm, "failed to attach dma mapping, %d\n", ret);
+		return ret;
+	}
+
+	ret = vop2_create_crtc(vop2);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static void vop2_unbind(struct device *dev, struct device *master, void *data)
+{
+	struct vop2 *vop2 = dev_get_drvdata(dev);
+	struct drm_device *drm = vop2->drm;
+	struct list_head *plane_list = &drm->mode_config.plane_list;
+	struct list_head *crtc_list = &drm->mode_config.crtc_list;
+	struct drm_crtc *crtc, *tmpc;
+	struct drm_plane *plane, *tmpp;
+
+	rockchip_drm_dma_detach_device(vop2->drm, vop2->dev);
+
+	pm_runtime_disable(dev);
+
+	list_for_each_entry_safe(plane, tmpp, plane_list, head)
+		drm_plane_cleanup(plane);
+
+	list_for_each_entry_safe(crtc, tmpc, crtc_list, head)
+		vop2_destroy_crtc(crtc);
+}
+
+const struct component_ops vop2_component_ops = {
+	.bind = vop2_bind,
+	.unbind = vop2_unbind,
+};
+EXPORT_SYMBOL_GPL(vop2_component_ops);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
new file mode 100644
index 000000000000..bb5677ff00e9
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:Mark Yao <mark.yao@rock-chips.com>
+ */
+
+#ifndef _ROCKCHIP_DRM_VOP2_H
+#define _ROCKCHIP_DRM_VOP2_H
+
+#include "rockchip_drm_vop.h"
+
+#include <linux/regmap.h>
+#include <drm/drm_modes.h>
+
+#define VOP_FEATURE_OUTPUT_10BIT        BIT(0)
+
+#define WIN_FEATURE_AFBDC		BIT(0)
+#define WIN_FEATURE_CLUSTER		BIT(1)
+
+/*
+ *  the delay number of a window in different mode.
+ */
+enum win_dly_mode {
+	VOP2_DLY_MODE_DEFAULT,   /**< default mode */
+	VOP2_DLY_MODE_HISO_S,    /** HDR in SDR out mode, as a SDR window */
+	VOP2_DLY_MODE_HIHO_H,    /** HDR in HDR out mode, as a HDR window */
+	VOP2_DLY_MODE_MAX,
+};
+
+struct vop_rect {
+	int width;
+	int height;
+};
+
+enum vop2_scale_up_mode {
+	VOP2_SCALE_UP_NRST_NBOR,
+	VOP2_SCALE_UP_BIL,
+	VOP2_SCALE_UP_BIC,
+};
+
+enum vop2_scale_down_mode {
+	VOP2_SCALE_DOWN_NRST_NBOR,
+	VOP2_SCALE_DOWN_BIL,
+	VOP2_SCALE_DOWN_AVG,
+};
+
+enum vop2_win_regs {
+	VOP2_WIN_ENABLE,
+	VOP2_WIN_FORMAT,
+	VOP2_WIN_CSC_MODE,
+	VOP2_WIN_XMIRROR,
+	VOP2_WIN_YMIRROR,
+	VOP2_WIN_RB_SWAP,
+	VOP2_WIN_UV_SWAP,
+	VOP2_WIN_ACT_INFO,
+	VOP2_WIN_DSP_INFO,
+	VOP2_WIN_DSP_ST,
+	VOP2_WIN_YRGB_MST,
+	VOP2_WIN_UV_MST,
+	VOP2_WIN_YRGB_VIR,
+	VOP2_WIN_UV_VIR,
+	VOP2_WIN_YUV_CLIP,
+	VOP2_WIN_Y2R_EN,
+	VOP2_WIN_R2Y_EN,
+	VOP2_WIN_COLOR_KEY,
+	VOP2_WIN_COLOR_KEY_EN,
+	VOP2_WIN_DITHER_UP,
+
+	/* scale regs */
+	VOP2_WIN_SCALE_YRGB_X,
+	VOP2_WIN_SCALE_YRGB_Y,
+	VOP2_WIN_SCALE_CBCR_X,
+	VOP2_WIN_SCALE_CBCR_Y,
+	VOP2_WIN_YRGB_HOR_SCL_MODE,
+	VOP2_WIN_YRGB_HSCL_FILTER_MODE,
+	VOP2_WIN_YRGB_VER_SCL_MODE,
+	VOP2_WIN_YRGB_VSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_VER_SCL_MODE,
+	VOP2_WIN_CBCR_HSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_HOR_SCL_MODE,
+	VOP2_WIN_CBCR_VSCL_FILTER_MODE,
+	VOP2_WIN_VSD_CBCR_GT2,
+	VOP2_WIN_VSD_CBCR_GT4,
+	VOP2_WIN_VSD_YRGB_GT2,
+	VOP2_WIN_VSD_YRGB_GT4,
+	VOP2_WIN_BIC_COE_SEL,
+
+	/* cluster regs */
+	VOP2_WIN_CLUSTER_ENABLE,
+	VOP2_WIN_AFBC_ENABLE,
+	VOP2_WIN_CLUSTER_LB_MODE,
+
+	/* afbc regs */
+	VOP2_WIN_AFBC_FORMAT,
+	VOP2_WIN_AFBC_RB_SWAP,
+	VOP2_WIN_AFBC_UV_SWAP,
+	VOP2_WIN_AFBC_AUTO_GATING_EN,
+	VOP2_WIN_AFBC_BLOCK_SPLIT_EN,
+	VOP2_WIN_AFBC_PIC_VIR_WIDTH,
+	VOP2_WIN_AFBC_TILE_NUM,
+	VOP2_WIN_AFBC_PIC_OFFSET,
+	VOP2_WIN_AFBC_PIC_SIZE,
+	VOP2_WIN_AFBC_DSP_OFFSET,
+	VOP2_WIN_AFBC_TRANSFORM_OFFSET,
+	VOP2_WIN_AFBC_HDR_PTR,
+	VOP2_WIN_AFBC_HALF_BLOCK_EN,
+	VOP2_WIN_AFBC_ROTATE_270,
+	VOP2_WIN_AFBC_ROTATE_90,
+	VOP2_WIN_MAX_REG,
+};
+
+struct vop2_win_data {
+	const char *name;
+	uint8_t phys_id;
+
+	uint32_t base;
+	enum drm_plane_type type;
+
+	uint32_t nformats;
+	const uint32_t *formats;
+	const uint64_t *format_modifiers;
+	const unsigned int supported_rotations;
+
+	/**
+	 * @layer_sel_id: defined by register OVERLAY_LAYER_SEL of VOP2
+	 */
+	int layer_sel_id;
+	uint64_t feature;
+
+	unsigned int max_upscale_factor;
+	unsigned int max_downscale_factor;
+	const uint8_t dly[VOP2_DLY_MODE_MAX];
+};
+
+struct vop2_video_port_data {
+	char id;
+	uint32_t feature;
+	uint16_t gamma_lut_len;
+	uint16_t cubic_lut_len;
+	struct vop_rect max_output;
+	const u8 pre_scan_max_dly[4];
+	const struct vop2_video_port_regs *regs;
+	int offset;
+};
+
+struct vop2_data {
+	uint8_t nr_vps;
+	uint8_t nr_mixers;
+	uint8_t nr_layers;
+	uint8_t nr_gammas;
+	const struct vop2_ctrl *ctrl;
+	const struct vop2_win_data *win;
+	const struct vop2_video_port_data *vp;
+	const struct vop_csc_table *csc_table;
+	struct vop_rect max_input;
+	struct vop_rect max_output;
+
+	unsigned int win_size;
+	unsigned int soc_id;
+};
+
+/* interrupt define */
+#define FS_NEW_INTR			BIT(4)
+#define ADDR_SAME_INTR			BIT(5)
+#define LINE_FLAG1_INTR			BIT(6)
+#define WIN0_EMPTY_INTR			BIT(7)
+#define WIN1_EMPTY_INTR			BIT(8)
+#define WIN2_EMPTY_INTR			BIT(9)
+#define WIN3_EMPTY_INTR			BIT(10)
+#define HWC_EMPTY_INTR			BIT(11)
+#define POST_BUF_EMPTY_INTR		BIT(12)
+#define PWM_GEN_INTR			BIT(13)
+#define DMA_FINISH_INTR			BIT(14)
+#define FS_FIELD_INTR			BIT(15)
+#define FE_INTR				BIT(16)
+#define WB_UV_FIFO_FULL_INTR		BIT(17)
+#define WB_YRGB_FIFO_FULL_INTR		BIT(18)
+#define WB_COMPLETE_INTR		BIT(19)
+
+/*
+ * display output interface supported by rockchip lcdc
+ */
+#define ROCKCHIP_OUT_MODE_P888		0
+#define ROCKCHIP_OUT_MODE_BT1120	0
+#define ROCKCHIP_OUT_MODE_P666		1
+#define ROCKCHIP_OUT_MODE_P565		2
+#define ROCKCHIP_OUT_MODE_BT656		5
+#define ROCKCHIP_OUT_MODE_S888		8
+#define ROCKCHIP_OUT_MODE_S888_DUMMY	12
+#define ROCKCHIP_OUT_MODE_YUV420	14
+/* for use special outface */
+#define ROCKCHIP_OUT_MODE_AAAA		15
+
+enum vop_csc_format {
+	CSC_BT601L,
+	CSC_BT709L,
+	CSC_BT601F,
+	CSC_BT2020,
+};
+
+enum src_factor_mode {
+	SRC_FAC_ALPHA_ZERO,
+	SRC_FAC_ALPHA_ONE,
+	SRC_FAC_ALPHA_DST,
+	SRC_FAC_ALPHA_DST_INVERSE,
+	SRC_FAC_ALPHA_SRC,
+	SRC_FAC_ALPHA_SRC_GLOBAL,
+};
+
+enum dst_factor_mode {
+	DST_FAC_ALPHA_ZERO,
+	DST_FAC_ALPHA_ONE,
+	DST_FAC_ALPHA_SRC,
+	DST_FAC_ALPHA_SRC_INVERSE,
+	DST_FAC_ALPHA_DST,
+	DST_FAC_ALPHA_DST_GLOBAL,
+};
+
+#define RK3568_GRF_VO_CON1			0x0364
+/* System registers definition */
+#define RK3568_REG_CFG_DONE			0x000
+#define RK3568_VERSION_INFO			0x004
+#define RK3568_SYS_AUTO_GATING_CTRL		0x008
+#define RK3568_SYS_AXI_LUT_CTRL			0x024
+#define RK3568_DSP_IF_EN			0x028
+#define RK3568_DSP_IF_CTRL			0x02c
+#define RK3568_DSP_IF_POL			0x030
+#define RK3568_WB_CTRL				0x40
+#define RK3568_WB_XSCAL_FACTOR			0x44
+#define RK3568_WB_YRGB_MST			0x48
+#define RK3568_WB_CBR_MST			0x4C
+#define RK3568_OTP_WIN_EN			0x050
+#define RK3568_LUT_PORT_SEL			0x058
+#define RK3568_SYS_STATUS0			0x060
+#define RK3568_VP_LINE_FLAG(vp)			(0x70 + (vp) * 0x4)
+#define RK3568_SYS0_INT_EN			0x80
+#define RK3568_SYS0_INT_CLR			0x84
+#define RK3568_SYS0_INT_STATUS			0x88
+#define RK3568_SYS1_INT_EN			0x90
+#define RK3568_SYS1_INT_CLR			0x94
+#define RK3568_SYS1_INT_STATUS			0x98
+#define RK3568_VP_INT_EN(vp)			(0xA0 + (vp) * 0x10)
+#define RK3568_VP_INT_CLR(vp)			(0xA4 + (vp) * 0x10)
+#define RK3568_VP_INT_STATUS(vp)		(0xA8 + (vp) * 0x10)
+#define RK3568_VP_INT_RAW_STATUS(vp)		(0xAC + (vp) * 0x10)
+
+/* Video Port registers definition */
+#define RK3568_VP_DSP_CTRL			0x00
+#define RK3568_VP_MIPI_CTRL			0x04
+#define RK3568_VP_COLOR_BAR_CTRL		0x08
+#define RK3568_VP_3D_LUT_CTRL			0x10
+#define RK3568_VP_3D_LUT_MST			0x20
+#define RK3568_VP_DSP_BG			0x2C
+#define RK3568_VP_PRE_SCAN_HTIMING		0x30
+#define RK3568_VP_POST_DSP_HACT_INFO		0x34
+#define RK3568_VP_POST_DSP_VACT_INFO		0x38
+#define RK3568_VP_POST_SCL_FACTOR_YRGB		0x3C
+#define RK3568_VP_POST_SCL_CTRL			0x40
+#define RK3568_VP_POST_DSP_VACT_INFO_F1		0x44
+#define RK3568_VP_DSP_HTOTAL_HS_END		0x48
+#define RK3568_VP_DSP_HACT_ST_END		0x4C
+#define RK3568_VP_DSP_VTOTAL_VS_END		0x50
+#define RK3568_VP_DSP_VACT_ST_END		0x54
+#define RK3568_VP_DSP_VS_ST_END_F1		0x58
+#define RK3568_VP_DSP_VACT_ST_END_F1		0x5C
+#define RK3568_VP_BCSH_CTRL			0x60
+#define RK3568_VP_BCSH_BCS			0x64
+#define RK3568_VP_BCSH_H			0x68
+#define RK3568_VP_BCSH_COLOR_BAR		0x6C
+
+/* Overlay registers definition    */
+#define RK3568_OVL_CTRL				0x600
+#define RK3568_OVL_LAYER_SEL			0x604
+#define RK3568_OVL_PORT_SEL			0x608
+#define RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL	0x610
+#define RK3568_CLUSTER0_MIX_DST_COLOR_CTRL	0x614
+#define RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL	0x618
+#define RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL	0x61C
+#define RK3568_MIX0_SRC_COLOR_CTRL		0x650
+#define RK3568_MIX0_DST_COLOR_CTRL		0x654
+#define RK3568_MIX0_SRC_ALPHA_CTRL		0x658
+#define RK3568_MIX0_DST_ALPHA_CTRL		0x65C
+#define RK3568_HDR0_SRC_COLOR_CTRL		0x6C0
+#define RK3568_HDR0_DST_COLOR_CTRL		0x6C4
+#define RK3568_HDR0_SRC_ALPHA_CTRL		0x6C8
+#define RK3568_HDR0_DST_ALPHA_CTRL		0x6CC
+#define RK3568_VP_BG_MIX_CTRL(vp)		(0x6E0 + (vp) * 4)
+#define RK3568_CLUSTER_DLY_NUM			0x6F0
+#define RK3568_SMART_DLY_NUM			0x6F8
+
+/* Cluster register definition, offset relative to window base */
+#define RK3568_CLUSTER_WIN_CTRL0		0x00
+#define RK3568_CLUSTER_WIN_CTRL1		0x04
+#define RK3568_CLUSTER_WIN_YRGB_MST		0x10
+#define RK3568_CLUSTER_WIN_CBR_MST		0x14
+#define RK3568_CLUSTER_WIN_VIR			0x18
+#define RK3568_CLUSTER_WIN_ACT_INFO		0x20
+#define RK3568_CLUSTER_WIN_DSP_INFO		0x24
+#define RK3568_CLUSTER_WIN_DSP_ST		0x28
+#define RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB	0x30
+#define RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET	0x3C
+#define RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL	0x50
+#define RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE	0x54
+#define RK3568_CLUSTER_WIN_AFBCD_HDR_PTR	0x58
+#define RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH	0x5C
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE	0x60
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET	0x64
+#define RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET	0x68
+#define RK3568_CLUSTER_WIN_AFBCD_CTRL		0x6C
+
+#define RK3568_CLUSTER_CTRL			0x100
+
+/* (E)smart register definition, offset relative to window base */
+#define RK3568_SMART_CTRL0			0x00
+#define RK3568_SMART_CTRL1			0x04
+#define RK3568_SMART_REGION0_CTRL		0x10
+#define RK3568_SMART_REGION0_YRGB_MST		0x14
+#define RK3568_SMART_REGION0_CBR_MST		0x18
+#define RK3568_SMART_REGION0_VIR		0x1C
+#define RK3568_SMART_REGION0_ACT_INFO		0x20
+#define RK3568_SMART_REGION0_DSP_INFO		0x24
+#define RK3568_SMART_REGION0_DSP_ST		0x28
+#define RK3568_SMART_REGION0_SCL_CTRL		0x30
+#define RK3568_SMART_REGION0_SCL_FACTOR_YRGB	0x34
+#define RK3568_SMART_REGION0_SCL_FACTOR_CBR	0x38
+#define RK3568_SMART_REGION0_SCL_OFFSET		0x3C
+#define RK3568_SMART_REGION1_CTRL		0x40
+#define RK3568_SMART_REGION1_YRGB_MST		0x44
+#define RK3568_SMART_REGION1_CBR_MST		0x48
+#define RK3568_SMART_REGION1_VIR		0x4C
+#define RK3568_SMART_REGION1_ACT_INFO		0x50
+#define RK3568_SMART_REGION1_DSP_INFO		0x54
+#define RK3568_SMART_REGION1_DSP_ST		0x58
+#define RK3568_SMART_REGION1_SCL_CTRL		0x60
+#define RK3568_SMART_REGION1_SCL_FACTOR_YRGB	0x64
+#define RK3568_SMART_REGION1_SCL_FACTOR_CBR	0x68
+#define RK3568_SMART_REGION1_SCL_OFFSET		0x6C
+#define RK3568_SMART_REGION2_CTRL		0x70
+#define RK3568_SMART_REGION2_YRGB_MST		0x74
+#define RK3568_SMART_REGION2_CBR_MST		0x78
+#define RK3568_SMART_REGION2_VIR		0x7C
+#define RK3568_SMART_REGION2_ACT_INFO		0x80
+#define RK3568_SMART_REGION2_DSP_INFO		0x84
+#define RK3568_SMART_REGION2_DSP_ST		0x88
+#define RK3568_SMART_REGION2_SCL_CTRL		0x90
+#define RK3568_SMART_REGION2_SCL_FACTOR_YRGB	0x94
+#define RK3568_SMART_REGION2_SCL_FACTOR_CBR	0x98
+#define RK3568_SMART_REGION2_SCL_OFFSET		0x9C
+#define RK3568_SMART_REGION3_CTRL		0xA0
+#define RK3568_SMART_REGION3_YRGB_MST		0xA4
+#define RK3568_SMART_REGION3_CBR_MST		0xA8
+#define RK3568_SMART_REGION3_VIR		0xAC
+#define RK3568_SMART_REGION3_ACT_INFO		0xB0
+#define RK3568_SMART_REGION3_DSP_INFO		0xB4
+#define RK3568_SMART_REGION3_DSP_ST		0xB8
+#define RK3568_SMART_REGION3_SCL_CTRL		0xC0
+#define RK3568_SMART_REGION3_SCL_FACTOR_YRGB	0xC4
+#define RK3568_SMART_REGION3_SCL_FACTOR_CBR	0xC8
+#define RK3568_SMART_REGION3_SCL_OFFSET		0xCC
+#define RK3568_SMART_COLOR_KEY_CTRL		0xD0
+
+/* HDR register definition */
+#define RK3568_HDR_LUT_CTRL			0x2000
+#define RK3568_HDR_LUT_MST			0x2004
+#define RK3568_SDR2HDR_CTRL			0x2010
+#define RK3568_HDR2SDR_CTRL			0x2020
+#define RK3568_HDR2SDR_SRC_RANGE		0x2024
+#define RK3568_HDR2SDR_NORMFACEETF		0x2028
+#define RK3568_HDR2SDR_DST_RANGE		0x202C
+#define RK3568_HDR2SDR_NORMFACCGAMMA		0x2030
+#define RK3568_HDR_EETF_OETF_Y0			0x203C
+#define RK3568_HDR_SAT_Y0			0x20C0
+#define RK3568_HDR_EOTF_OETF_Y0			0x20F0
+#define RK3568_HDR_OETF_DX_POW1			0x2200
+#define RK3568_HDR_OETF_XN1			0x2300
+
+#define RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN		BIT(15)
+
+#define RK3568_VP_DSP_CTRL__STANDBY			BIT(31)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_MODE		BIT(20)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL		GENMASK(19, 18)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_EN		BIT(17)
+#define RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN		BIT(16)
+#define RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y		BIT(15)
+#define RK3568_VP_DSP_CTRL__DSP_RB_SWAP			BIT(9)
+#define RK3568_VP_DSP_CTRL__DSP_INTERLACE		BIT(7)
+#define RK3568_VP_DSP_CTRL__DSP_FILED_POL		BIT(6)
+#define RK3568_VP_DSP_CTRL__P2I_EN			BIT(5)
+#define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
+#define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
+
+#define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
+#define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
+
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX		GENMASK(26, 25)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1			BIT(24)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1			BIT(20)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX		GENMASK(19, 18)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(17, 16)
+#define RK3568_SYS_DSP_INFACE_EN_EDP_MUX		GENMASK(15, 14)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI_MUX		GENMASK(11, 10)
+#define RK3568_SYS_DSP_INFACE_EN_RGB_MUX		GENMASK(9, 8)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0			BIT(5)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0			BIT(4)
+#define RK3568_SYS_DSP_INFACE_EN_EDP			BIT(3)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
+#define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
+
+#define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
+#define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
+#define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
+#define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
+
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
+
+#define RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN	BIT(31)
+
+#define RK3568_DSP_IF_POL__CFG_DONE_IMD			BIT(28)
+
+#define VOP2_SYS_AXI_BUS_NUM				2
+
+#define VOP2_CLUSTER_YUV444_10				0x12
+
+#define VOP2_COLOR_KEY_MASK				BIT(31)
+
+#define RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD		BIT(28)
+
+#define RK3568_VP_BG_MIX_CTRL__BG_DLY			GENMASK(31, 24)
+
+#define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
+#define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
+#define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
+#define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
+#define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
+#define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
+#define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
+#define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
+#define RK3568_OVL_PORT_SET__PORT1_MUX			GENMASK(7, 4)
+#define RK3568_OVL_PORT_SET__PORT0_MUX			GENMASK(3, 0)
+#define RK3568_OVL_LAYER_SEL__LAYER(layer, x)		((x) << ((layer) * 4))
+
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_1		GENMASK(31, 24)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_0		GENMASK(23, 16)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
+
+#define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
+#define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
+#define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
+#define RK3568_SMART_DLY_NUM__ESMART0			GENMASK(7, 0)
+
+#define VP_INT_DSP_HOLD_VALID	BIT(6)
+#define VP_INT_FS_FIELD		BIT(5)
+#define VP_INT_POST_BUF_EMPTY	BIT(4)
+#define VP_INT_LINE_FLAG1	BIT(3)
+#define VP_INT_LINE_FLAG0	BIT(2)
+#define VOP2_INT_BUS_ERRPR	BIT(1)
+#define VP_INT_FS		BIT(0)
+
+#define POLFLAG_DCLK_INV	BIT(3)
+
+enum vop2_layer_phy_id {
+	ROCKCHIP_VOP2_CLUSTER0 = 0,
+	ROCKCHIP_VOP2_CLUSTER1,
+	ROCKCHIP_VOP2_ESMART0,
+	ROCKCHIP_VOP2_ESMART1,
+	ROCKCHIP_VOP2_SMART0,
+	ROCKCHIP_VOP2_SMART1,
+	ROCKCHIP_VOP2_CLUSTER2,
+	ROCKCHIP_VOP2_CLUSTER3,
+	ROCKCHIP_VOP2_ESMART2,
+	ROCKCHIP_VOP2_ESMART3,
+	ROCKCHIP_VOP2_PHY_ID_INVALID = -1,
+};
+
+extern const struct component_ops vop2_component_ops;
+
+#endif /* _ROCKCHIP_DRM_VOP2_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
new file mode 100644
index 000000000000..2376e63d9478
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Rockchip Electronics Co.Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/component.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_print.h>
+
+#include "rockchip_drm_vop2.h"
+
+static const uint32_t formats_win_full_10bit[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+};
+
+static const uint32_t formats_win_full_10bit_yuyv[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_VYUY,
+};
+
+static const uint32_t formats_win_lite[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+};
+
+static const uint64_t format_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const uint64_t format_modifiers_afbc[] = {
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	/* SPLIT mandates SPARSE, RGB modes mandates YTR */
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE |
+				AFBC_FORMAT_MOD_SPLIT),
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const struct vop2_video_port_data rk3568_vop_video_ports[] = {
+	{
+		.id = 0,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 9 * 9 * 9,
+		.max_output = { 4096, 2304 },
+		.pre_scan_max_dly = { 69, 53, 53, 42 },
+		.offset = 0xc00,
+	}, {
+		.id = 1,
+		.gamma_lut_len = 1024,
+		.max_output = { 2048, 1536 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xd00,
+	}, {
+		.id = 2,
+		.gamma_lut_len = 1024,
+		.max_output = { 1920, 1080 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xe00,
+	},
+};
+
+/*
+ * rk3568 vop with 2 cluster, 2 esmart win, 2 smart win.
+ * Every cluster can work as 4K win or split into two win.
+ * All win in cluster support AFBCD.
+ *
+ * Every esmart win and smart win support 4 Multi-region.
+ *
+ * Scale filter mode:
+ *
+ * * Cluster:  bicubic for horizontal scale up, others use bilinear
+ * * ESmart:
+ *    * nearest-neighbor/bilinear/bicubic for scale up
+ *    * nearest-neighbor/bilinear/average for scale down
+ *
+ *
+ * @TODO describe the wind like cpu-map dt nodes;
+ */
+static const struct vop2_win_data rk3568_vop_win_data[] = {
+	{
+		.name = "Smart0-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART0,
+		.base = 0x1c00,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.layer_sel_id = 3,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Smart1-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART1,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.base = 0x1e00,
+		.layer_sel_id = 7,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart1-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART1,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1a00,
+		.layer_sel_id = 6,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart0-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART0,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1800,
+		.layer_sel_id = 2,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Cluster0-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
+		.base = 0x1000,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 0,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster1-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
+		.base = 0x1200,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 1,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	},
+};
+
+static const struct vop2_data rk3566_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3566,
+};
+
+static const struct vop2_data rk3568_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3568,
+};
+
+static const struct of_device_id vop2_dt_match[] = {
+	{
+		.compatible = "rockchip,rk3566-vop",
+		.data = &rk3566_vop,
+	}, {
+		.compatible = "rockchip,rk3568-vop",
+		.data = &rk3568_vop,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, vop2_dt_match);
+
+static int vop2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return component_add(dev, &vop2_component_ops);
+}
+
+static int vop2_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &vop2_component_ops);
+
+	return 0;
+}
+
+struct platform_driver vop2_platform_driver = {
+	.probe = vop2_probe,
+	.remove = vop2_remove,
+	.driver = {
+		.name = "rockchip-vop2",
+		.of_match_table = of_match_ptr(vop2_dt_match),
+	},
+};
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

From: Andy Yan <andy.yan@rock-chips.com>

The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.

This driver has been derived from the downstream Rockchip Kernel and
heavily modified:

- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
  functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs

The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.

Changes since v3:
- Sort includes
- fix typos
- Drop spinlock
- Use regmap_set_bits()/regmap_clear_bits()
- simplify vop2_scale_factor()
- simplify vop2_afbc_transform_offset()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/rockchip/Kconfig             |    6 +
 drivers/gpu/drm/rockchip/Makefile            |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c  |    1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h  |    7 +-
 drivers/gpu/drm/rockchip/rockchip_drm_fb.c   |    2 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h  |   15 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2665 ++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  480 ++++
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c |  285 ++
 9 files changed, 3461 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
 create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index b9b156308460..4ff0043f0ee7 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -28,6 +28,12 @@ config ROCKCHIP_VOP
 	  This selects support for the VOP driver. You should enable it
 	  on all older SoCs up to RK3399.
 
+config ROCKCHIP_VOP2
+	bool "Rockchip VOP2 driver"
+	help
+	  This selects support for the VOP2 driver. You should enable it
+	  on all newer SoCs beginning form RK3568.
+
 config ROCKCHIP_ANALOGIX_DP
 	bool "Rockchip specific extensions for Analogix DP driver"
 	depends on ROCKCHIP_VOP
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index dfc5512fdb9f..3ff7b21c0414 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,6 +6,7 @@
 rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \
 		rockchip_drm_gem.o
 
+rockchipdrm-$(CONFIG_ROCKCHIP_VOP2) += rockchip_drm_vop2.o rockchip_vop2_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_VOP) += rockchip_drm_vop.o rockchip_vop_reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 82c8faf1fb6b..95f6c5985fdd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -459,6 +459,7 @@ static int __init rockchip_drm_init(void)
 
 	num_rockchip_sub_drivers = 0;
 	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_ROCKCHIP_VOP);
+	ADD_ROCKCHIP_SUB_DRIVER(vop2_platform_driver, CONFIG_ROCKCHIP_VOP2);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
 				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 143a48330f84..6e1f97e1e4a6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -18,7 +18,7 @@
 
 #define ROCKCHIP_MAX_FB_BUFFER	3
 #define ROCKCHIP_MAX_CONNECTOR	2
-#define ROCKCHIP_MAX_CRTC	2
+#define ROCKCHIP_MAX_CRTC	4
 
 struct drm_device;
 struct drm_connector;
@@ -31,6 +31,9 @@ struct rockchip_crtc_state {
 	int output_bpc;
 	int output_flags;
 	bool enable_afbc;
+	uint32_t bus_format;
+	u32 bus_flags;
+	int color_space;
 };
 #define to_rockchip_crtc_state(s) \
 		container_of(s, struct rockchip_crtc_state, base)
@@ -63,4 +66,6 @@ extern struct platform_driver rockchip_dp_driver;
 extern struct platform_driver rockchip_lvds_driver;
 extern struct platform_driver vop_platform_driver;
 extern struct platform_driver rk3066_hdmi_driver;
+extern struct platform_driver vop2_platform_driver;
+
 #endif /* _ROCKCHIP_DRM_DRV_H_ */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
index 3aa37e177667..0d2cb4f3922b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
@@ -134,4 +134,6 @@ void rockchip_drm_mode_config_init(struct drm_device *dev)
 
 	dev->mode_config.funcs = &rockchip_drm_mode_config_funcs;
 	dev->mode_config.helper_private = &rockchip_mode_config_helpers;
+
+	dev->mode_config.normalize_zpos = true;
 }
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index 857d97cdc67c..1e364d7b50e6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -54,9 +54,23 @@ struct vop_afbc {
 	struct vop_reg enable;
 	struct vop_reg win_sel;
 	struct vop_reg format;
+	struct vop_reg rb_swap;
+	struct vop_reg uv_swap;
+	struct vop_reg auto_gating_en;
+	struct vop_reg block_split_en;
+	struct vop_reg pic_vir_width;
+	struct vop_reg tile_num;
 	struct vop_reg hreg_block_split;
+	struct vop_reg pic_offset;
 	struct vop_reg pic_size;
+	struct vop_reg dsp_offset;
+	struct vop_reg transform_offset;
 	struct vop_reg hdr_ptr;
+	struct vop_reg half_block_en;
+	struct vop_reg xmirror;
+	struct vop_reg ymirror;
+	struct vop_reg rotate_270;
+	struct vop_reg rotate_90;
 	struct vop_reg rstn;
 };
 
@@ -410,4 +424,5 @@ static inline int scl_vop_cal_lb_mode(int width, bool is_yuv)
 }
 
 extern const struct component_ops vop_component_ops;
+
 #endif /* _ROCKCHIP_DRM_VOP_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
new file mode 100644
index 000000000000..9ceaae97ed0c
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -0,0 +1,2665 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/swab.h>
+
+#include <drm/drm.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_debugfs.h>
+#include <drm/drm_flip_work.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <uapi/linux/videodev2.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_gem.h"
+#include "rockchip_drm_fb.h"
+#include "rockchip_drm_vop2.h"
+
+/*
+ * VOP2 architecture
+ *
+ +----------+   +-------------+                                                        +-----------+
+ |  Cluster |   | Sel 1 from 6|                                                        | 1 from 3  |
+ |  window0 |   |    Layer0   |                                                        |    RGB    |
+ +----------+   +-------------+              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 layers|    |             |
+ |  Cluster |   | Sel 1 from 6|              |   Overlay0    +--->| Video Port0 |      +-----------+
+ |  window1 |   |    Layer1   |              |               |    |             |      | 1 from 3  |
+ +----------+   +-------------+              +---------------+    +-------------+      |   LVDS    |
+ +----------+   +-------------+                                                        +-----------+
+ |  Esmart  |   | Sel 1 from 6|
+ |  window0 |   |   Layer2    |              +---------------+    +-------------+      +-----------+
+ +----------+   +-------------+              |N from 6 Layers|    |             | +--> | 1 from 3  |
+ +----------+   +-------------+   -------->  |   Overlay1    +--->| Video Port1 |      |   MIPI    |
+ |  Esmart  |   | Sel 1 from 6|   -------->  |               |    |             |      +-----------+
+ |  Window1 |   |   Layer3    |              +---------------+    +-------------+
+ +----------+   +-------------+                                                        +-----------+
+ +----------+   +-------------+                                                        | 1 from 3  |
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |   HDMI    |
+ |  Window0 |   |    Layer4   |              |N from 6 Layers|    |             |      +-----------+
+ +----------+   +-------------+              |   Overlay2    +--->| Video Port2 |
+ +----------+   +-------------+              |               |    |             |      +-----------+
+ |  Smart   |   | Sel 1 from 6|              +---------------+    +-------------+      |  1 from 3 |
+ |  Window1 |   |    Layer5   |                                                        |    eDP    |
+ +----------+   +-------------+                                                        +-----------+
+ *
+ */
+
+enum vop2_data_format {
+	VOP2_FMT_ARGB8888 = 0,
+	VOP2_FMT_RGB888,
+	VOP2_FMT_RGB565,
+	VOP2_FMT_XRGB101010,
+	VOP2_FMT_YUV420SP,
+	VOP2_FMT_YUV422SP,
+	VOP2_FMT_YUV444SP,
+	VOP2_FMT_YUYV422 = 8,
+	VOP2_FMT_YUYV420,
+	VOP2_FMT_VYUY422,
+	VOP2_FMT_VYUY420,
+	VOP2_FMT_YUV420SP_TILE_8x4 = 0x10,
+	VOP2_FMT_YUV420SP_TILE_16x2,
+	VOP2_FMT_YUV422SP_TILE_8x4,
+	VOP2_FMT_YUV422SP_TILE_16x2,
+	VOP2_FMT_YUV420SP_10,
+	VOP2_FMT_YUV422SP_10,
+	VOP2_FMT_YUV444SP_10,
+};
+
+enum vop2_afbc_format {
+	VOP2_AFBC_FMT_RGB565,
+	VOP2_AFBC_FMT_ARGB2101010 = 2,
+	VOP2_AFBC_FMT_YUV420_10BIT,
+	VOP2_AFBC_FMT_RGB888,
+	VOP2_AFBC_FMT_ARGB8888,
+	VOP2_AFBC_FMT_YUV420 = 9,
+	VOP2_AFBC_FMT_YUV422 = 0xb,
+	VOP2_AFBC_FMT_YUV422_10BIT = 0xe,
+	VOP2_AFBC_FMT_INVALID = -1,
+};
+
+union vop2_alpha_ctrl {
+	uint32_t val;
+	struct {
+		/* [0:1] */
+		uint32_t color_mode:1;
+		uint32_t alpha_mode:1;
+		/* [2:3] */
+		uint32_t blend_mode:2;
+		uint32_t alpha_cal_mode:1;
+		/* [5:7] */
+		uint32_t factor_mode:3;
+		/* [8:9] */
+		uint32_t alpha_en:1;
+		uint32_t src_dst_swap:1;
+		uint32_t reserved:6;
+		/* [16:23] */
+		uint32_t glb_alpha:8;
+	} bits;
+};
+
+struct vop2_alpha {
+	union vop2_alpha_ctrl src_color_ctrl;
+	union vop2_alpha_ctrl dst_color_ctrl;
+	union vop2_alpha_ctrl src_alpha_ctrl;
+	union vop2_alpha_ctrl dst_alpha_ctrl;
+};
+
+struct vop2_alpha_config {
+	bool src_premulti_en;
+	bool dst_premulti_en;
+	bool src_pixel_alpha_en;
+	bool dst_pixel_alpha_en;
+	uint16_t src_glb_alpha_value;
+	uint16_t dst_glb_alpha_value;
+};
+
+struct vop2_win {
+	struct vop2 *vop2;
+	struct drm_plane base;
+	const struct vop2_win_data *data;
+	struct regmap_field *reg[VOP2_WIN_MAX_REG];
+
+	/**
+	 * @win_id: graphic window id, a cluster may be split into two
+	 * graphics windows.
+	 */
+	uint8_t win_id;
+
+	uint32_t offset;
+
+	uint8_t delay;
+	enum drm_plane_type type;
+};
+
+struct vop2_video_port {
+	struct drm_crtc crtc;
+	struct vop2 *vop2;
+	struct clk *dclk;
+	uint8_t id;
+	const struct vop2_video_port_regs *regs;
+	const struct vop2_video_port_data *data;
+
+	struct completion dsp_hold_completion;
+
+	/**
+	 * @win_mask: Bitmask of windows attached to the video port;
+	 */
+	uint32_t win_mask;
+
+	struct vop2_win *primary_plane;
+	struct drm_pending_vblank_event *event;
+
+	int nlayers;
+};
+
+struct vop2 {
+	struct device *dev;
+	struct drm_device *drm;
+	struct vop2_video_port vps[ROCKCHIP_MAX_CRTC];
+
+	const struct vop2_data *data;
+	/*
+	 * Number of windows that are registered as plane, may be less than the
+	 * total number of hardware windows.
+	 */
+	uint32_t registered_num_wins;
+
+	void __iomem *regs;
+	struct regmap *map;
+
+	struct regmap *grf;
+
+	/* physical map length of vop2 register */
+	uint32_t len;
+
+	void __iomem *lut_regs;
+
+	/* protects crtc enable/disable */
+	struct mutex vop2_lock;
+
+	int irq;
+
+	/*
+	 * Some global resources are shared between all video ports(crtcs), so
+	 * we need a ref counter here.
+	 */
+	unsigned int enable_count;
+	struct clk *hclk;
+	struct clk *aclk;
+
+	/* must be put at the end of the struct */
+	struct vop2_win win[];
+};
+
+static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
+{
+	return container_of(crtc, struct vop2_video_port, crtc);
+}
+
+static struct vop2_win *to_vop2_win(struct drm_plane *p)
+{
+	return container_of(p, struct vop2_win, base);
+}
+
+static void vop2_lock(struct vop2 *vop2)
+{
+	mutex_lock(&vop2->vop2_lock);
+}
+
+static void vop2_unlock(struct vop2 *vop2)
+{
+	mutex_unlock(&vop2->vop2_lock);
+}
+
+static void vop2_writel(struct vop2 *vop2, uint32_t offset, uint32_t v)
+{
+	regmap_write(vop2->map, offset, v);
+}
+
+static void vop2_vp_write(struct vop2_video_port *vp, uint32_t offset,
+			  uint32_t v)
+{
+	regmap_write(vp->vop2->map, vp->data->offset + offset, v);
+}
+
+static uint32_t vop2_readl(struct vop2 *vop2, uint32_t offset)
+{
+	uint32_t val;
+
+	regmap_read(vop2->map, offset, &val);
+
+	return val;
+}
+
+static void vop2_win_write(const struct vop2_win *win, unsigned int reg,
+			   uint32_t v)
+{
+	regmap_field_write(win->reg[reg], v);
+}
+
+static bool vop2_cluster_window(const struct vop2_win *win)
+{
+	return win->data->feature & WIN_FEATURE_CLUSTER;
+}
+
+static void vop2_cfg_done(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	regmap_set_bits(vop2->map, RK3568_REG_CFG_DONE,
+			BIT(vp->id) | RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+}
+
+static void vop2_win_disable(struct vop2_win *win)
+{
+	vop2_win_write(win, VOP2_WIN_ENABLE, 0);
+
+	if (vop2_cluster_window(win))
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 0);
+}
+
+static enum vop2_data_format vop2_convert_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_FMT_YUV420SP;
+	case DRM_FORMAT_NV16:
+		return VOP2_FMT_YUV422SP;
+	case DRM_FORMAT_NV24:
+		return VOP2_FMT_YUV444SP;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+		return VOP2_FMT_VYUY422;
+	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_UYVY:
+		return VOP2_FMT_YUYV422;
+	default:
+		DRM_ERROR("unsupported format[%08x]\n", format);
+		return -EINVAL;
+	}
+}
+
+static enum vop2_afbc_format vop2_convert_afbc_format(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+		return VOP2_AFBC_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		return VOP2_AFBC_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		return VOP2_AFBC_FMT_RGB565;
+	case DRM_FORMAT_NV12:
+		return VOP2_AFBC_FMT_YUV420;
+	case DRM_FORMAT_NV16:
+		return VOP2_AFBC_FMT_YUV422;
+	default:
+		return VOP2_AFBC_FMT_INVALID;
+	}
+
+	return VOP2_AFBC_FMT_INVALID;
+}
+
+static bool vop2_win_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_BGR565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_rb_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_afbc_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_uv_swap(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+	case DRM_FORMAT_NV24:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_win_dither_up(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB565:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool vop2_output_uv_swap(uint32_t bus_format, uint32_t output_mode)
+{
+	/*
+	 * FIXME:
+	 *
+	 * There is no media type for YUV444 output,
+	 * so when out_mode is AAAA or P888, assume output is YUV444 on
+	 * yuv format.
+	 *
+	 * From H/W testing, YUV444 mode need a rb swap.
+	 */
+	if (bus_format == MEDIA_BUS_FMT_YVYU8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_1X16 ||
+	    bus_format == MEDIA_BUS_FMT_YVYU8_2X8 ||
+	    bus_format == MEDIA_BUS_FMT_VYUY8_2X8 ||
+	    ((bus_format == MEDIA_BUS_FMT_YUV8_1X24 ||
+	      bus_format == MEDIA_BUS_FMT_YUV10_1X30) &&
+	     (output_mode == ROCKCHIP_OUT_MODE_AAAA ||
+	      output_mode == ROCKCHIP_OUT_MODE_P888)))
+		return true;
+	else
+		return false;
+}
+
+static bool is_yuv_output(uint32_t bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+	case MEDIA_BUS_FMT_YUYV8_2X8:
+	case MEDIA_BUS_FMT_YVYU8_2X8:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+	case MEDIA_BUS_FMT_VYUY8_2X8:
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_YVYU8_1X16:
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_VYUY8_1X16:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rockchip_afbc(struct drm_plane *plane, u64 modifier)
+{
+	int i;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return false;
+
+	for (i = 0 ; i < plane->modifier_count; i++)
+		if (plane->modifiers[i] == modifier)
+			return true;
+
+	return false;
+
+}
+
+static bool rockchip_vop2_mod_supported(struct drm_plane *plane, uint32_t format, u64 modifier)
+{
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	if (modifier == DRM_FORMAT_MOD_INVALID)
+		return false;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR)
+		return true;
+
+	if (!rockchip_afbc(plane, modifier)) {
+		drm_err(vop2->drm, "Unsupported format modifier 0x%llx\n", modifier);
+
+		return false;
+	}
+
+	return vop2_convert_afbc_format(format) >= 0;
+}
+
+static uint32_t vop2_afbc_transform_offset(struct drm_plane_state *pstate,
+					   bool afbc_half_block_en)
+{
+	struct drm_rect *src = &pstate->src;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t vir_width = (fb->pitches[0] << 3) / bpp;
+	uint32_t width = drm_rect_width(src) >> 16;
+	uint32_t height = drm_rect_height(src) >> 16;
+	uint32_t act_xoffset = src->x1 >> 16;
+	uint32_t act_yoffset = src->y1 >> 16;
+	uint32_t align16_crop = 0;
+	uint32_t align64_crop = 0;
+	uint32_t height_tmp;
+	uint8_t tx, ty;
+	uint8_t bottom_crop_line_num = 0;
+
+	/* 16 pixel align */
+	if (height & 0xf)
+		align16_crop = 16 - (height & 0xf);
+
+	height_tmp = height + align16_crop;
+
+	/* 64 pixel align */
+	if (height_tmp & 0x3f)
+		align64_crop = 64 - (height_tmp & 0x3f);
+
+	bottom_crop_line_num = align16_crop + align64_crop;
+
+	switch (pstate->rotation &
+		(DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y |
+		 DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270)) {
+	case DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_REFLECT_X:
+		tx = 16 - ((act_xoffset + width) & 0xf);
+		ty = act_yoffset;
+		break;
+	case DRM_MODE_REFLECT_Y:
+		tx = act_xoffset;
+		ty = bottom_crop_line_num - act_yoffset;
+		break;
+	case DRM_MODE_ROTATE_90:
+		tx = bottom_crop_line_num - act_yoffset;
+		ty = act_xoffset;
+		break;
+	case DRM_MODE_ROTATE_270:
+		tx = act_yoffset;
+		ty = vir_width - width - act_xoffset;
+		break;
+	case 0:
+		tx = act_xoffset;
+		ty = act_yoffset;
+		break;
+	}
+
+	if (afbc_half_block_en)
+		ty &= 0x7f;
+
+#define TRANSFORM_XOFFSET GENMASK(7, 0)
+#define TRANSFORM_YOFFSET GENMASK(23, 16)
+	return FIELD_PREP(TRANSFORM_XOFFSET, tx) |
+		FIELD_PREP(TRANSFORM_YOFFSET, ty);
+}
+
+/*
+ * A Cluster window has 2048 x 16 line buffer, which can
+ * works at 2048 x 16(Full) or 4096 x 8 (Half) mode.
+ * for Cluster_lb_mode register:
+ * 0: half mode, for plane input width range 2048 ~ 4096
+ * 1: half mode, for cluster work at 2 * 2048 plane mode
+ * 2: half mode, for rotate_90/270 mode
+ *
+ */
+static int vop2_get_cluster_lb_mode(struct vop2_win *win, struct drm_plane_state *pstate)
+{
+	if ((pstate->rotation & DRM_MODE_ROTATE_270) || (pstate->rotation & DRM_MODE_ROTATE_90))
+		return 2;
+	else
+		return 0;
+}
+
+static uint16_t vop2_scale_factor(uint32_t src, uint32_t dst)
+{
+	uint32_t fac;
+	int shift;
+
+	if (src == dst)
+		return 0;
+
+	if (dst < 2)
+		return U16_MAX;
+
+	if (src < 2)
+		return 0;
+
+	if (src > dst)
+		shift = 12;
+	else
+		shift = 16;
+
+	src--;
+	dst--;
+
+	fac = DIV_ROUND_UP(src << shift, dst) - 1;
+
+	if (fac > U16_MAX)
+		return U16_MAX;
+
+	return fac;
+}
+
+static void vop2_setup_scale(struct vop2 *vop2, const struct vop2_win *win,
+			     uint32_t src_w, uint32_t src_h, uint32_t dst_w,
+			     uint32_t dst_h, uint32_t pixel_format)
+{
+	const struct drm_format_info *info;
+	uint16_t hor_scl_mode, ver_scl_mode;
+	uint16_t hscl_filter_mode, vscl_filter_mode;
+	uint8_t gt2 = 0;
+	uint8_t gt4 = 0;
+	uint32_t val;
+
+	info = drm_format_info(pixel_format);
+
+	if (src_h >= (4 * dst_h)) {
+		gt4 = 1;
+		src_h >>= 2;
+	} else if (src_h >= (2 * dst_h)) {
+		gt2 = 1;
+		src_h >>= 1;
+	}
+
+	hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+	ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+	if (hor_scl_mode == SCALE_UP)
+		hscl_filter_mode = VOP2_SCALE_UP_BIC;
+	else
+		hscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	if (ver_scl_mode == SCALE_UP)
+		vscl_filter_mode = VOP2_SCALE_UP_BIL;
+	else
+		vscl_filter_mode = VOP2_SCALE_DOWN_BIL;
+
+	/*
+	 * RK3568 VOP Esmart/Smart dsp_w should be even pixel
+	 * at scale down mode
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if ((hor_scl_mode == SCALE_DOWN) && (dst_w & 0x1)) {
+			drm_dbg(vop2->drm, "%s dst_w[%d] should align as 2 pixel\n",
+				win->data->name, dst_w);
+			dst_w++;
+		}
+	}
+
+	val = vop2_scale_factor(src_w, dst_w);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_X, val);
+	val = vop2_scale_factor(src_h, dst_h);
+	vop2_win_write(win, VOP2_WIN_SCALE_YRGB_Y, val);
+
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT4, gt4);
+	vop2_win_write(win, VOP2_WIN_VSD_YRGB_GT2, gt2);
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HOR_SCL_MODE, hor_scl_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VER_SCL_MODE, ver_scl_mode);
+
+	if (vop2_cluster_window(win))
+		return;
+
+	vop2_win_write(win, VOP2_WIN_YRGB_HSCL_FILTER_MODE, hscl_filter_mode);
+	vop2_win_write(win, VOP2_WIN_YRGB_VSCL_FILTER_MODE, vscl_filter_mode);
+
+	if (info->is_yuv) {
+		src_w /= info->hsub;
+		src_h /= info->vsub;
+
+		gt4 = gt2 = 0;
+
+		if (src_h >= (4 * dst_h)) {
+			gt4 = 1;
+			src_h >>= 2;
+		} else if (src_h >= (2 * dst_h)) {
+			gt2 = 1;
+			src_h >>= 1;
+		}
+
+		hor_scl_mode = scl_get_scl_mode(src_w, dst_w);
+		ver_scl_mode = scl_get_scl_mode(src_h, dst_h);
+
+		val = vop2_scale_factor(src_w, dst_w);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_X, val);
+
+		val = vop2_scale_factor(src_h, dst_h);
+		vop2_win_write(win, VOP2_WIN_SCALE_CBCR_Y, val);
+
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT4, gt4);
+		vop2_win_write(win, VOP2_WIN_VSD_CBCR_GT2, gt2);
+		vop2_win_write(win, VOP2_WIN_CBCR_HOR_SCL_MODE, hor_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VER_SCL_MODE, ver_scl_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_HSCL_FILTER_MODE, hscl_filter_mode);
+		vop2_win_write(win, VOP2_WIN_CBCR_VSCL_FILTER_MODE, vscl_filter_mode);
+	}
+}
+
+static int vop2_convert_csc_mode(int csc_mode)
+{
+	switch (csc_mode) {
+	case V4L2_COLORSPACE_SMPTE170M:
+	case V4L2_COLORSPACE_470_SYSTEM_M:
+	case V4L2_COLORSPACE_470_SYSTEM_BG:
+		return CSC_BT601L;
+	case V4L2_COLORSPACE_REC709:
+	case V4L2_COLORSPACE_SMPTE240M:
+	case V4L2_COLORSPACE_DEFAULT:
+		return CSC_BT709L;
+	case V4L2_COLORSPACE_JPEG:
+		return CSC_BT601F;
+	case V4L2_COLORSPACE_BT2020:
+		return CSC_BT2020;
+	default:
+		return CSC_BT709L;
+	}
+}
+
+/*
+ * colorspace path:
+ *      Input        Win csc                     Output
+ * 1. YUV(2020)  --> Y2R->2020To709->R2Y   --> YUV_OUTPUT(601/709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 2. YUV(2020)  --> bypasss               --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 3. YUV(2020)  --> Y2R->2020To709        --> RGB_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 4. YUV(601/709)-> Y2R->709To2020->R2Y   --> YUV_OUTPUT(2020)
+ *    RGB        --> 709To2020->R2Y       __/
+ *
+ * 5. YUV(601/709)-> bypass                --> YUV_OUTPUT(709)
+ *    RGB        --> R2Y                  __/
+ *
+ * 6. YUV(601/709)-> bypass                --> YUV_OUTPUT(601)
+ *    RGB        --> R2Y(601)             __/
+ *
+ * 7. YUV        --> Y2R(709)              --> RGB_OUTPUT(709)
+ *    RGB        --> bypass               __/
+ *
+ * 8. RGB        --> 709To2020->R2Y        --> YUV_OUTPUT(2020)
+ *
+ * 9. RGB        --> R2Y(709)              --> YUV_OUTPUT(709)
+ *
+ * 10. RGB       --> R2Y(601)              --> YUV_OUTPUT(601)
+ *
+ * 11. RGB       --> bypass                --> RGB_OUTPUT(709)
+ */
+
+static void vop2_setup_csc_mode(struct vop2_video_port *vp,
+				struct vop2_win *win,
+				struct drm_plane_state *pstate)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(vp->crtc.state);
+	int is_input_yuv = pstate->fb->format->is_yuv;
+	int is_output_yuv = is_yuv_output(vcstate->bus_format);
+	int input_csc = V4L2_COLORSPACE_DEFAULT;
+	int output_csc = vcstate->color_space;
+	bool r2y_en, y2r_en;
+	int csc_mode;
+
+	if (is_input_yuv && !is_output_yuv) {
+		y2r_en = true;
+		r2y_en = false;
+		csc_mode = vop2_convert_csc_mode(input_csc);
+	} else if (!is_input_yuv && is_output_yuv) {
+		y2r_en = false;
+		r2y_en = true;
+		csc_mode = vop2_convert_csc_mode(output_csc);
+	} else {
+		y2r_en = false;
+		r2y_en = false;
+		csc_mode = false;
+	}
+
+	vop2_win_write(win, VOP2_WIN_Y2R_EN, y2r_en);
+	vop2_win_write(win, VOP2_WIN_R2Y_EN, r2y_en);
+	vop2_win_write(win, VOP2_WIN_CSC_MODE, csc_mode);
+}
+
+static void vop2_crtc_enable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irq << 16 | irq);
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16 | irq);
+}
+
+static void vop2_crtc_disable_irq(struct vop2_video_port *vp, uint32_t irq)
+{
+	struct vop2 *vop2 = vp->vop2;
+
+	vop2_writel(vop2, RK3568_VP_INT_EN(vp->id), irq << 16);
+}
+
+static int vop2_core_clks_prepare_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = clk_prepare_enable(vop2->hclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable hclk - %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(vop2->aclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable aclk - %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	clk_disable_unprepare(vop2->hclk);
+
+	return ret;
+}
+
+static void vop2_enable(struct vop2 *vop2)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(vop2->dev);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to get pm runtime: %d\n", ret);
+		return;
+	}
+
+	ret = vop2_core_clks_prepare_enable(vop2);
+	if (ret) {
+		pm_runtime_put_sync(vop2->dev);
+		return;
+	}
+
+	if (vop2->data->soc_id == 3566)
+		vop2_writel(vop2, RK3568_OTP_WIN_EN, 1);
+
+	vop2_writel(vop2, RK3568_REG_CFG_DONE, RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN);
+
+	/*
+	 * Disable auto gating, this is a workaround to
+	 * avoid display image shift when a window enabled.
+	 */
+	regmap_clear_bits(vop2->map, RK3568_SYS_AUTO_GATING_CTRL,
+			  RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN);
+
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS0_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+	vop2_writel(vop2, RK3568_SYS1_INT_EN,
+		    VOP2_INT_BUS_ERRPR << 16 | VOP2_INT_BUS_ERRPR);
+}
+
+static void vop2_disable(struct vop2 *vop2)
+{
+	pm_runtime_put_sync(vop2->dev);
+
+	clk_disable_unprepare(vop2->aclk);
+	clk_disable_unprepare(vop2->hclk);
+}
+
+static void vop2_crtc_atomic_disable(struct drm_crtc *crtc,
+				     struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	int ret;
+
+	vop2_lock(vop2);
+
+	drm_crtc_vblank_off(crtc);
+
+	/*
+	 * Vop standby will take effect at end of current frame,
+	 * if dsp hold valid irq happen, it means standby complete.
+	 *
+	 * we must wait standby complete when we want to disable aclk,
+	 * if not, memory bus maybe dead.
+	 */
+	reinit_completion(&vp->dsp_hold_completion);
+
+	vop2_crtc_enable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, RK3568_VP_DSP_CTRL__STANDBY);
+
+	ret = wait_for_completion_timeout(&vp->dsp_hold_completion, msecs_to_jiffies(50));
+	if (!ret)
+		drm_info(vop2->drm, "wait for vp%d dsp_hold timeout\n", vp->id);
+
+	vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID);
+
+	clk_disable_unprepare(vp->dclk);
+
+	vop2->enable_count--;
+
+	if (!vop2->enable_count)
+		vop2_disable(vop2);
+
+	vop2_unlock(vop2);
+
+	if (crtc->state->event && !crtc->state->active) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+
+		crtc->state->event = NULL;
+	}
+}
+
+static int vop2_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *astate)
+{
+	struct drm_plane_state *pstate = drm_atomic_get_new_plane_state(astate, plane);
+	struct drm_framebuffer *fb = pstate->fb;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct drm_crtc_state *cstate;
+	struct vop2_video_port *vp;
+	struct vop2 *vop2;
+	const struct vop2_data *vop2_data;
+	struct drm_rect *dest = &pstate->dst;
+	struct drm_rect *src = &pstate->src;
+	int min_scale = FRAC_16_16(1, 8);
+	int max_scale = FRAC_16_16(8, 1);
+	int format;
+	int ret;
+
+	if (!crtc)
+		return 0;
+
+	vp = to_vop2_video_port(crtc);
+	vop2 = vp->vop2;
+	vop2_data = vop2->data;
+
+	cstate = drm_atomic_get_existing_crtc_state(pstate->state, crtc);
+	if (WARN_ON(!cstate))
+		return -EINVAL;
+
+	ret = drm_atomic_helper_check_plane_state(pstate, cstate,
+						  min_scale, max_scale,
+						  true, true);
+	if (ret)
+		return ret;
+
+	if (!pstate->visible)
+		return 0;
+
+	format = vop2_convert_format(fb->format->format);
+	if (format < 0)
+		return format;
+
+	if (drm_rect_width(src) >> 16 < 4 || drm_rect_height(src) >> 16 < 4 ||
+	    drm_rect_width(dest) < 4 || drm_rect_width(dest) < 4) {
+		drm_err(vop2->drm, "Invalid size: %dx%d->%dx%d, min size is 4x4\n",
+			  drm_rect_width(src) >> 16, drm_rect_height(src) >> 16,
+			  drm_rect_width(dest), drm_rect_height(dest));
+		pstate->visible = false;
+		return 0;
+	}
+
+	if (drm_rect_width(src) >> 16 > vop2_data->max_input.width ||
+	    drm_rect_height(src) >> 16 > vop2_data->max_input.height) {
+		drm_err(vop2->drm, "Invalid source: %dx%d. max input: %dx%d\n",
+			  drm_rect_width(src) >> 16,
+			  drm_rect_height(src) >> 16,
+			  vop2_data->max_input.width,
+			  vop2_data->max_input.height);
+		return -EINVAL;
+	}
+
+	/*
+	 * Src.x1 can be odd when do clip, but yuv plane start point
+	 * need align with 2 pixel.
+	 */
+	if (fb->format->is_yuv && ((pstate->src.x1 >> 16) % 2)) {
+		drm_err(vop2->drm, "Invalid Source: Yuv format not support odd xpos\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void vop2_plane_atomic_disable(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *old_pstate = drm_atomic_get_old_plane_state(state, plane);
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2 *vop2 = win->vop2;
+
+	drm_dbg(vop2->drm, "%s disable\n", win->data->name);
+
+	if (!old_pstate->crtc)
+		return;
+
+	vop2_win_disable(win);
+	vop2_win_write(win, VOP2_WIN_YUV_CLIP, 0);
+}
+
+/*
+ * The color key is 10 bit, so all format should
+ * convert to 10 bit here.
+ */
+static void vop2_plane_setup_color_key(struct drm_plane *plane, uint32_t color_key)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_framebuffer *fb = pstate->fb;
+	struct vop2_win *win = to_vop2_win(plane);
+	uint32_t color_key_en = 0;
+	uint32_t r = 0;
+	uint32_t g = 0;
+	uint32_t b = 0;
+
+	if (!(color_key & VOP2_COLOR_KEY_MASK) || fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, 0);
+		return;
+	}
+
+	switch (fb->format->format) {
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+		r = (color_key & 0xf800) >> 11;
+		g = (color_key & 0x7e0) >> 5;
+		b = (color_key & 0x1f);
+		r <<= 5;
+		g <<= 4;
+		b <<= 5;
+		color_key_en = 1;
+		break;
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+		r = (color_key & 0xff0000) >> 16;
+		g = (color_key & 0xff00) >> 8;
+		b = (color_key & 0xff);
+		r <<= 2;
+		g <<= 2;
+		b <<= 2;
+		color_key_en = 1;
+		break;
+	}
+
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY_EN, color_key_en);
+	vop2_win_write(win, VOP2_WIN_COLOR_KEY, (r << 20) | (g << 10) | b);
+}
+
+static void vop2_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
+{
+	struct drm_plane_state *pstate = plane->state;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct vop2_win *win = to_vop2_win(plane);
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
+	struct vop2 *vop2 = win->vop2;
+	struct drm_framebuffer *fb = pstate->fb;
+	uint32_t bpp = fb->format->cpp[0] * 8;
+	uint32_t actual_w, actual_h, dsp_w, dsp_h;
+	uint32_t act_info, dsp_info;
+	uint32_t format;
+	uint32_t afbc_format;
+	uint32_t rb_swap;
+	uint32_t uv_swap;
+	struct drm_rect *src = &pstate->src;
+	struct drm_rect *dest = &pstate->dst;
+	uint32_t afbc_tile_num;
+	uint32_t transform_offset;
+	bool dither_up;
+	bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
+	bool ymirror = pstate->rotation & DRM_MODE_REFLECT_Y;
+	bool rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
+	bool rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
+	struct rockchip_gem_object *rk_obj;
+	unsigned long offset;
+	bool afbc_en;
+	dma_addr_t yrgb_mst;
+	dma_addr_t uv_mst;
+
+	/*
+	 * can't update plane when vop2 is disabled.
+	 */
+	if (WARN_ON(!crtc))
+		return;
+
+	if (!pstate->visible) {
+		vop2_plane_atomic_disable(plane, state);
+		return;
+	}
+
+	afbc_en = rockchip_afbc(plane, fb->modifier);
+
+	offset = (src->x1 >> 16) * fb->format->cpp[0];
+
+	/*
+	 * AFBC HDR_PTR must set to the zero offset of the framebuffer.
+	 */
+	if (afbc_en)
+		offset = 0;
+	else if (pstate->rotation & DRM_MODE_REFLECT_Y)
+		offset += ((src->y2 >> 16) - 1) * fb->pitches[0];
+	else
+		offset += (src->y1 >> 16) * fb->pitches[0];
+
+	rk_obj = to_rockchip_obj(fb->obj[0]);
+
+	yrgb_mst = rk_obj->dma_addr + offset + fb->offsets[0];
+	if (fb->format->is_yuv) {
+		int hsub = fb->format->hsub;
+		int vsub = fb->format->vsub;
+
+		offset = (src->x1 >> 16) * fb->format->cpp[1] / hsub;
+		offset += (src->y1 >> 16) * fb->pitches[1] / vsub;
+
+		if ((pstate->rotation & DRM_MODE_REFLECT_Y) && !afbc_en)
+			offset += fb->pitches[1] * ((pstate->src_h >> 16) - 2)  / vsub;
+
+		rk_obj = to_rockchip_obj(fb->obj[0]);
+		uv_mst = rk_obj->dma_addr + offset + fb->offsets[1];
+	}
+
+	actual_w = drm_rect_width(src) >> 16;
+	actual_h = drm_rect_height(src) >> 16;
+	dsp_w = drm_rect_width(dest);
+
+	if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
+			  vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
+		dsp_w = adjusted_mode->hdisplay - dest->x1;
+		if (dsp_w < 4)
+			dsp_w = 4;
+		actual_w = dsp_w * actual_w / drm_rect_width(dest);
+	}
+
+	dsp_h = drm_rect_height(dest);
+
+	if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
+		drm_err(vop2->drm, "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
+			  vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
+		dsp_h = adjusted_mode->vdisplay - dest->y1;
+		if (dsp_h < 4)
+			dsp_h = 4;
+		actual_h = dsp_h * actual_h / drm_rect_height(dest);
+	}
+
+	/*
+	 * This is workaround solution for IC design:
+	 * esmart can't support scale down when actual_w % 16 == 1.
+	 */
+	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
+		if (actual_w > dsp_w && (actual_w & 0xf) == 1) {
+			drm_err(vop2->drm, "vp%d %s act_w[%d] MODE 16 == 1\n", vp->id, win->data->name, actual_w);
+			actual_w -= 1;
+		}
+	}
+
+	if (afbc_en && actual_w % 4) {
+		drm_err(vop2->drm, "vp%d %s actual_w[%d] should align as 4 pixel when enable afbc\n",
+			  vp->id, win->data->name, actual_w);
+		actual_w = ALIGN_DOWN(actual_w, 4);
+	}
+
+	act_info = (actual_h - 1) << 16 | ((actual_w - 1) & 0xffff);
+	dsp_info = (dsp_h - 1) << 16 | ((dsp_w - 1) & 0xffff);
+
+	format = vop2_convert_format(fb->format->format);
+
+	drm_dbg(vop2->drm, "vp%d update %s[%dx%d->%dx%d@%dx%d] fmt[%p4cc_%s] addr[%pad]\n",
+		      vp->id, win->data->name, actual_w, actual_h, dsp_w, dsp_h,
+		      dest->x1, dest->y1,
+		      &fb->format->format,
+		      afbc_en ? "AFBC" : "", &yrgb_mst);
+
+	if (afbc_en) {
+		uint32_t stride;
+
+		/* the afbc superblock is 16 x 16 */
+		afbc_format = vop2_convert_afbc_format(fb->format->format);
+
+		/* Enable color transform for YTR */
+		if (fb->modifier & AFBC_FORMAT_MOD_YTR)
+			afbc_format |= (1 << 4);
+
+		afbc_tile_num = ALIGN(actual_w, 16) >> 4;
+
+		/*
+		 * AFBC pic_vir_width is count by pixel, this is different
+		 * with WIN_VIR_STRIDE.
+		 */
+		stride = (fb->pitches[0] << 3) / bpp;
+		if ((stride & 0x3f) && (xmirror || rotate_90 || rotate_270))
+			drm_err(vop2->drm, "vp%d %s stride[%d] must align as 64 pixel when enable xmirror/rotate_90/rotate_270[0x%x]\n",
+				  vp->id, win->data->name, stride, pstate->rotation);
+
+		rb_swap = vop2_afbc_rb_swap(fb->format->format);
+		uv_swap = vop2_afbc_uv_swap(fb->format->format);
+		/*
+		 * This is a workaround for crazy IC design, Cluster
+		 * and Esmart/Smart use different format configuration map:
+		 * YUV420_10BIT: 0x10 for Cluster, 0x14 for Esmart/Smart.
+		 *
+		 * This is one thing we can make the convert simple:
+		 * AFBCD decode all the YUV data to YUV444. So we just
+		 * set all the yuv 10 bit to YUV444_10.
+		 */
+		if (fb->format->is_yuv && (bpp == 10))
+			format = VOP2_CLUSTER_YUV444_10;
+
+		if (vop2_cluster_window(win))
+			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
+		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
+		vop2_win_write(win, VOP2_WIN_AFBC_RB_SWAP, rb_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
+		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
+		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
+		if (pstate->rotation & (DRM_MODE_ROTATE_270 | DRM_MODE_ROTATE_90)) {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 0);
+			transform_offset = vop2_afbc_transform_offset(pstate, false);
+		} else {
+			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 1);
+			transform_offset = vop2_afbc_transform_offset(pstate, true);
+		}
+		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_SIZE, act_info);
+		vop2_win_write(win, VOP2_WIN_AFBC_TRANSFORM_OFFSET, transform_offset);
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_OFFSET, ((src->x1 >> 16) | src->y1));
+		vop2_win_write(win, VOP2_WIN_AFBC_DSP_OFFSET, (dest->x1 | (dest->y1 << 16)));
+		vop2_win_write(win, VOP2_WIN_AFBC_PIC_VIR_WIDTH, stride);
+		vop2_win_write(win, VOP2_WIN_AFBC_TILE_NUM, afbc_tile_num);
+		vop2_win_write(win, VOP2_WIN_XMIRROR, xmirror);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_270, rotate_270);
+		vop2_win_write(win, VOP2_WIN_AFBC_ROTATE_90, rotate_90);
+	} else {
+		vop2_win_write(win, VOP2_WIN_YRGB_VIR, DIV_ROUND_UP(fb->pitches[0], 4));
+	}
+
+	vop2_win_write(win, VOP2_WIN_YMIRROR, ymirror);
+
+	if (rotate_90 || rotate_270) {
+		act_info = swahw32(act_info);
+		actual_w = drm_rect_height(src) >> 16;
+		actual_h = drm_rect_width(src) >> 16;
+	}
+
+	vop2_win_write(win, VOP2_WIN_FORMAT, format);
+	vop2_win_write(win, VOP2_WIN_YRGB_MST, yrgb_mst);
+
+	rb_swap = vop2_win_rb_swap(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_RB_SWAP, rb_swap);
+	if (!vop2_cluster_window(win)) {
+		uv_swap = vop2_win_uv_swap(fb->format->format);
+		vop2_win_write(win, VOP2_WIN_UV_SWAP, uv_swap);
+	}
+
+	if (fb->format->is_yuv) {
+		vop2_win_write(win, VOP2_WIN_UV_VIR, DIV_ROUND_UP(fb->pitches[1], 4));
+		vop2_win_write(win, VOP2_WIN_UV_MST, uv_mst);
+	}
+
+	vop2_setup_scale(vop2, win, actual_w, actual_h, dsp_w, dsp_h, fb->format->format);
+	if (!vop2_cluster_window(win))
+		vop2_plane_setup_color_key(plane, 0);
+	vop2_win_write(win, VOP2_WIN_ACT_INFO, act_info);
+	vop2_win_write(win, VOP2_WIN_DSP_INFO, dsp_info);
+	vop2_win_write(win, VOP2_WIN_DSP_ST, dest->y1 << 16 | (dest->x1 & 0xffff));
+
+	vop2_setup_csc_mode(vp, win, pstate);
+
+	dither_up = vop2_win_dither_up(fb->format->format);
+	vop2_win_write(win, VOP2_WIN_DITHER_UP, dither_up);
+
+	vop2_win_write(win, VOP2_WIN_ENABLE, 1);
+
+	if (vop2_cluster_window(win)) {
+		int lb_mode = vop2_get_cluster_lb_mode(win, pstate);
+
+		vop2_win_write(win, VOP2_WIN_CLUSTER_LB_MODE, lb_mode);
+		vop2_win_write(win, VOP2_WIN_CLUSTER_ENABLE, 1);
+	}
+}
+
+static const struct drm_plane_helper_funcs vop2_plane_helper_funcs = {
+	.atomic_check = vop2_plane_atomic_check,
+	.atomic_update = vop2_plane_atomic_update,
+	.atomic_disable = vop2_plane_atomic_disable,
+};
+
+static const struct drm_plane_funcs vop2_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy = drm_plane_cleanup,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+	.format_mod_supported = rockchip_vop2_mod_supported,
+};
+
+static int vop2_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_enable_irq(vp, VP_INT_FS_FIELD);
+
+	return 0;
+}
+
+static void vop2_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_crtc_disable_irq(vp, VP_INT_FS_FIELD);
+}
+
+static bool vop2_crtc_mode_fixup(struct drm_crtc *crtc,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj_mode)
+{
+	drm_mode_set_crtcinfo(adj_mode, CRTC_INTERLACE_HALVE_V | CRTC_STEREO_DOUBLE);
+
+	return true;
+}
+
+static void vop2_dither_setup(struct drm_crtc *crtc, uint32_t *dsp_ctrl)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	switch (vcstate->bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__DITHER_DOWN_EN;
+		*dsp_ctrl |= RGB888_TO_RGB666;
+		break;
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+		break;
+	default:
+		break;
+	}
+
+	if (vcstate->output_mode != ROCKCHIP_OUT_MODE_AAAA)
+		*dsp_ctrl |= RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN;
+
+	*dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL,
+				DITHER_DOWN_ALLEGRO);
+}
+
+static void vop2_post_config(struct drm_crtc *crtc)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint32_t left_margin = 100, right_margin = 100, top_margin = 100, bottom_margin = 100;
+	uint16_t hsize = hdisplay * (left_margin + right_margin) / 200;
+	uint16_t vsize = vdisplay * (top_margin + bottom_margin) / 200;
+	uint16_t hact_end, vact_end;
+	uint32_t val;
+
+	vsize = rounddown(vsize, 2);
+	hsize = rounddown(hsize, 2);
+	hact_st += hdisplay * (100 - left_margin) / 200;
+	hact_end = hact_st + hsize;
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_HACT_INFO, val);
+	vact_st += vdisplay * (100 - top_margin) / 200;
+	vact_end = vact_st + vsize;
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO, val);
+	val = scl_cal_scale2(vdisplay, vsize) << 16;
+	val |= scl_cal_scale2(hdisplay, hsize);
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_FACTOR_YRGB, val);
+
+	val = 0;
+	if (hdisplay != hsize)
+		val |= RK3568_VP_POST_SCL_CTRL__HSCALEDOWN;
+	if (vdisplay != vsize)
+		val |= RK3568_VP_POST_SCL_CTRL__VSCALEDOWN;
+	vop2_vp_write(vp, RK3568_VP_POST_SCL_CTRL, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vsize;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_POST_DSP_VACT_INFO_F1, val);
+	}
+
+	vop2_vp_write(vp, RK3568_VP_DSP_BG, 0);
+}
+
+static void rk3568_set_intf_mux(struct vop2_video_port *vp, int id,
+				uint32_t polflags)
+{
+	struct vop2 *vop2 = vp->vop2;
+	uint32_t die, dip;
+
+	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
+	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
+
+	switch (id) {
+	case RK3568_VOP2_EP_RGB:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_RGB_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_RGB |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_RGB_MUX, vp->id);
+		if (polflags & POLFLAG_DCLK_INV)
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16) | BIT(3));
+		else
+			regmap_write(vop2->grf, RK3568_GRF_VO_CON1, BIT(3 + 16));
+		break;
+	case RK3568_VOP2_EP_HDMI:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_HDMI_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_HDMI |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_HDMI_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_EDP:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_EDP_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_EDP |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_EDP_MUX, vp->id);
+		break;
+	case RK3568_VOP2_EP_MIPI0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_MIPI1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_MIPI1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__MIPI_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__MIPI_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS0:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS0 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	case RK3568_VOP2_EP_LVDS1:
+		die &= ~RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX;
+		die |= RK3568_SYS_DSP_INFACE_EN_LVDS1 |
+			   FIELD_PREP(RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX, vp->id);
+		dip &= ~RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL;
+		dip |= FIELD_PREP(RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL, polflags);
+		break;
+	default:
+		return;
+	};
+
+	dip |= RK3568_DSP_IF_POL__CFG_DONE_IMD;
+
+	vop2_writel(vop2, RK3568_DSP_IF_EN, die);
+	vop2_writel(vop2, RK3568_DSP_IF_POL, dip);
+}
+
+static int us_to_vertical_line(struct drm_display_mode *mode, int us)
+{
+	return us * mode->clock / mode->htotal / 1000;
+}
+
+static void vop2_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	const struct vop2_data *vop2_data = vop2->data;
+	const struct vop2_video_port_data *vp_data = &vop2_data->vp[vp->id];
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	unsigned long clock = mode->crtc_clock * 1000;
+	uint16_t hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	uint16_t hdisplay = mode->crtc_hdisplay;
+	uint16_t htotal = mode->crtc_htotal;
+	uint16_t hact_st = mode->crtc_htotal - mode->crtc_hsync_start;
+	uint16_t hact_end = hact_st + hdisplay;
+	uint16_t vdisplay = mode->crtc_vdisplay;
+	uint16_t vtotal = mode->crtc_vtotal;
+	uint16_t vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	uint16_t vact_st = mode->crtc_vtotal - mode->crtc_vsync_start;
+	uint16_t vact_end = vact_st + vdisplay;
+	uint8_t out_mode;
+	uint32_t dsp_ctrl = 0;
+	int act_end;
+	uint32_t val, polflags;
+	int ret;
+	struct drm_encoder *encoder;
+
+	drm_dbg(vop2->drm, "Update mode to %dx%d%s%d, type: %d for vp%d\n",
+		hdisplay, vdisplay, mode->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "p",
+		drm_mode_vrefresh(mode), vcstate->output_type, vp->id);
+
+	vop2_lock(vop2);
+
+	ret = clk_prepare_enable(vp->dclk);
+	if (ret < 0) {
+		drm_err(vop2->drm, "failed to enable dclk for video port%d - %d\n",
+			      vp->id, ret);
+		return;
+	}
+
+	if (!vop2->enable_count)
+		vop2_enable(vop2);
+
+	vop2->enable_count++;
+
+	vop2_crtc_enable_irq(vp, VP_INT_POST_BUF_EMPTY);
+
+	polflags = 0;
+	if (vcstate->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+		polflags |= POLFLAG_DCLK_INV;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		polflags |= BIT(HSYNC_POSITIVE);
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		polflags |= BIT(VSYNC_POSITIVE);
+
+	drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
+		struct device_node *node, *parent;
+
+		parent = of_get_parent(encoder->port);
+
+		for_each_endpoint_of_node(parent, node) {
+			struct device_node *crtc_port = of_graph_get_remote_port(node);
+			struct device_node *epn;
+			struct of_endpoint endpoint;
+
+			if (crtc->port != crtc_port) {
+				of_node_put(crtc_port);
+				continue;
+			}
+
+			of_node_put(crtc_port);
+
+			epn = of_graph_get_remote_endpoint(node);
+			of_graph_parse_endpoint(epn, &endpoint);
+			of_node_put(epn);
+
+			drm_dbg(vop2->drm, "vp%d is connected to %s, id %d\n",
+					   vp->id, encoder->name, endpoint.id);
+			rk3568_set_intf_mux(vp, endpoint.id, polflags);
+		}
+		of_node_put(parent);
+	}
+
+	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
+	     !(vp_data->feature & VOP_FEATURE_OUTPUT_10BIT))
+		out_mode = ROCKCHIP_OUT_MODE_P888;
+	else
+		out_mode = vcstate->output_mode;
+
+	dsp_ctrl |= FIELD_PREP(RK3568_VP_DSP_CTRL__OUT_MODE, out_mode);
+
+	if (vop2_output_uv_swap(vcstate->bus_format, vcstate->output_mode))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_RB_SWAP;
+
+	if (is_yuv_output(vcstate->bus_format))
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y;
+
+	vop2_dither_setup(crtc, &dsp_ctrl);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_HTOTAL_HS_END, (htotal << 16) | hsync_len);
+	val = hact_st << 16;
+	val |= hact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_HACT_ST_END, val);
+
+	val = vact_st << 16;
+	val |= vact_end;
+	vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END, val);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		uint16_t vact_st_f1 = vtotal + vact_st + 1;
+		uint16_t vact_end_f1 = vact_st_f1 + vdisplay;
+
+		val = vact_st_f1 << 16 | vact_end_f1;
+		vop2_vp_write(vp, RK3568_VP_DSP_VACT_ST_END_F1, val);
+
+		val = vtotal << 16 | (vtotal + vsync_len);
+		vop2_vp_write(vp, RK3568_VP_DSP_VS_ST_END_F1, val);
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_INTERLACE;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__DSP_FILED_POL;
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__P2I_EN;
+		vtotal += vtotal + 1;
+		act_end = vact_end_f1;
+	} else {
+		act_end = vact_end;
+	}
+
+	vop2_writel(vop2, RK3568_VP_LINE_FLAG(vp->id),
+		    (act_end - us_to_vertical_line(mode, 0)) << 16 | act_end);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_VTOTAL_VS_END, vtotal << 16 | vsync_len);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
+		dsp_ctrl |= RK3568_VP_DSP_CTRL__CORE_DCLK_DIV;
+		clock *= 2;
+	}
+
+	vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0);
+
+	clk_set_rate(vp->dclk, clock);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	vop2_vp_write(vp, RK3568_VP_DSP_CTRL, dsp_ctrl);
+
+	drm_crtc_vblank_on(crtc);
+
+	vop2_unlock(vop2);
+}
+
+static int vop2_crtc_atomic_check(struct drm_crtc *crtc,
+				  struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct drm_plane *plane;
+	int nplanes = 0;
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+	drm_atomic_crtc_state_for_each_plane(plane, crtc_state)
+		nplanes++;
+
+	if (nplanes > vp->nlayers)
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool is_opaque(uint16_t alpha)
+{
+	return (alpha >> 8) == 0xff;
+}
+
+static void vop2_parse_alpha(struct vop2_alpha_config *alpha_config,
+			     struct vop2_alpha *alpha)
+{
+	int src_glb_alpha_en = is_opaque(alpha_config->src_glb_alpha_value) ? 0 : 1;
+	int dst_glb_alpha_en = is_opaque(alpha_config->dst_glb_alpha_value) ? 0 : 1;
+	int src_color_mode = alpha_config->src_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+	int dst_color_mode = alpha_config->dst_premulti_en ? ALPHA_SRC_PRE_MUL : ALPHA_SRC_NO_PRE_MUL;
+
+	alpha->src_color_ctrl.val = 0;
+	alpha->dst_color_ctrl.val = 0;
+	alpha->src_alpha_ctrl.val = 0;
+	alpha->dst_alpha_ctrl.val = 0;
+
+	if (!alpha_config->src_pixel_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	else if (alpha_config->src_pixel_alpha_en && !src_glb_alpha_en)
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->src_color_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+
+	alpha->src_color_ctrl.bits.alpha_en = 1;
+
+	if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_GLOBAL) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	} else if (alpha->src_color_ctrl.bits.blend_mode == ALPHA_PER_PIX) {
+		alpha->src_color_ctrl.bits.color_mode = src_color_mode;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_ONE;
+	} else {
+		alpha->src_color_ctrl.bits.color_mode = ALPHA_SRC_PRE_MUL;
+		alpha->src_color_ctrl.bits.factor_mode = SRC_FAC_ALPHA_SRC_GLOBAL;
+	}
+	alpha->src_color_ctrl.bits.glb_alpha = alpha_config->src_glb_alpha_value >> 8;
+	alpha->src_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+
+	alpha->dst_color_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->dst_color_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->dst_color_ctrl.bits.blend_mode = ALPHA_GLOBAL;
+	alpha->dst_color_ctrl.bits.glb_alpha = alpha_config->dst_glb_alpha_value >> 8;
+	alpha->dst_color_ctrl.bits.color_mode = dst_color_mode;
+	alpha->dst_color_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+
+	alpha->src_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	alpha->src_alpha_ctrl.bits.blend_mode = alpha->src_color_ctrl.bits.blend_mode;
+	alpha->src_alpha_ctrl.bits.alpha_cal_mode = ALPHA_SATURATION;
+	alpha->src_alpha_ctrl.bits.factor_mode = ALPHA_ONE;
+
+	alpha->dst_alpha_ctrl.bits.alpha_mode = ALPHA_STRAIGHT;
+	if (alpha_config->dst_pixel_alpha_en && !dst_glb_alpha_en)
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX;
+	else
+		alpha->dst_alpha_ctrl.bits.blend_mode = ALPHA_PER_PIX_GLOBAL;
+	alpha->dst_alpha_ctrl.bits.alpha_cal_mode = ALPHA_NO_SATURATION;
+	alpha->dst_alpha_ctrl.bits.factor_mode = ALPHA_SRC_INVERSE;
+}
+
+static int vop2_find_start_mixer_id_for_vp(struct vop2 *vop2, uint8_t port_id)
+{
+	struct vop2_video_port *vp;
+	int used_layer = 0;
+	int i;
+
+	for (i = 0; i < port_id; i++) {
+		vp = &vop2->vps[i];
+		used_layer += hweight32(vp->win_mask);
+	}
+
+	return used_layer;
+}
+
+static void vop2_setup_cluster_alpha(struct vop2 *vop2, struct vop2_win *main_win)
+{
+	uint32_t offset = (main_win->data->phys_id * 0x10);
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane_state *bottom_win_pstate;
+	bool src_pixel_alpha_en = false;
+	uint16_t src_glb_alpha_val, dst_glb_alpha_val;
+	bool premulti_en = false;
+	bool swap = false;
+
+	/* At one win mode, win0 is dst/bottom win, and win1 is a all zero src/top win */
+	bottom_win_pstate = main_win->base.state;
+	src_glb_alpha_val = 0;
+	dst_glb_alpha_val = main_win->base.state->alpha;
+
+	if (!bottom_win_pstate->fb)
+		return;
+
+	alpha_config.src_premulti_en = premulti_en;
+	alpha_config.dst_premulti_en = false;
+	alpha_config.src_pixel_alpha_en = src_pixel_alpha_en;
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+	alpha_config.src_glb_alpha_value = src_glb_alpha_val;
+	alpha_config.dst_glb_alpha_value = dst_glb_alpha_val;
+	vop2_parse_alpha(&alpha_config, &alpha);
+
+	alpha.src_color_ctrl.bits.src_dst_swap = swap;
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL + offset,
+		    alpha.src_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_COLOR_CTRL + offset,
+		    alpha.dst_color_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL + offset,
+		    alpha.src_alpha_ctrl.val);
+	vop2_writel(vop2, RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL + offset,
+		    alpha.dst_alpha_ctrl.val);
+}
+
+static void vop2_setup_alpha(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_framebuffer *fb;
+	struct vop2_alpha_config alpha_config;
+	struct vop2_alpha alpha;
+	struct drm_plane *plane;
+	int pixel_alpha_en;
+	int premulti_en, gpremulti_en = 0;
+	int mixer_id;
+	uint32_t offset;
+	bool bottom_layer_alpha_en = false;
+	uint32_t dst_global_alpha = DRM_BLEND_ALPHA_OPAQUE;
+
+	mixer_id = vop2_find_start_mixer_id_for_vp(vop2, vp->id);
+	alpha_config.dst_pixel_alpha_en = true; /* alpha value need transfer to next mix */
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		if (plane->state->normalized_zpos == 0 &&
+		    !is_opaque(plane->state->alpha) &&
+		    !vop2_cluster_window(win)) {
+			/*
+			 * If bottom layer have global alpha effect [except cluster layer,
+			 * because cluster have deal with bottom layer global alpha value
+			 * at cluster mix], bottom layer mix need deal with global alpha.
+			 */
+			bottom_layer_alpha_en = true;
+			dst_global_alpha = plane->state->alpha;
+		}
+	}
+
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+		int zpos = plane->state->normalized_zpos;
+
+		if (plane->state->pixel_blend_mode == DRM_MODE_BLEND_PREMULTI)
+			premulti_en = 1;
+		else
+			premulti_en = 0;
+
+		plane = &win->base;
+		fb = plane->state->fb;
+
+		pixel_alpha_en = fb->format->has_alpha;
+
+		alpha_config.src_premulti_en = premulti_en;
+
+		if (bottom_layer_alpha_en && zpos == 1) {
+			gpremulti_en = premulti_en;
+			/* Cd = Cs + (1 - As) * Cd * Agd */
+			alpha_config.dst_premulti_en = false;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = dst_global_alpha;
+		} else if (vop2_cluster_window(win)) {
+			/* Mix output data only have pixel alpha */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		} else {
+			/* Cd = Cs + (1 - As) * Cd */
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = pixel_alpha_en;
+			alpha_config.src_glb_alpha_value = plane->state->alpha;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+		}
+
+		vop2_parse_alpha(&alpha_config, &alpha);
+
+		offset = (mixer_id + zpos - 1) * 0x10;
+		vop2_writel(vop2, RK3568_MIX0_SRC_COLOR_CTRL + offset,
+			    alpha.src_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_COLOR_CTRL + offset,
+			    alpha.dst_color_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_SRC_ALPHA_CTRL + offset,
+			    alpha.src_alpha_ctrl.val);
+		vop2_writel(vop2, RK3568_MIX0_DST_ALPHA_CTRL + offset,
+			    alpha.dst_alpha_ctrl.val);
+	}
+
+	if (vp->id == 0) {
+		if (bottom_layer_alpha_en) {
+			/* Transfer pixel alpha to hdr mix */
+			alpha_config.src_premulti_en = gpremulti_en;
+			alpha_config.dst_premulti_en = true;
+			alpha_config.src_pixel_alpha_en = true;
+			alpha_config.src_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			alpha_config.dst_glb_alpha_value = DRM_BLEND_ALPHA_OPAQUE;
+			vop2_parse_alpha(&alpha_config, &alpha);
+
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL,
+				alpha.src_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_COLOR_CTRL,
+				alpha.dst_color_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_SRC_ALPHA_CTRL,
+				alpha.src_alpha_ctrl.val);
+			vop2_writel(vop2, RK3568_HDR0_DST_ALPHA_CTRL,
+				alpha.dst_alpha_ctrl.val);
+		} else {
+			vop2_writel(vop2, RK3568_HDR0_SRC_COLOR_CTRL, 0);
+		}
+	}
+}
+
+#define NR_VPS		3
+#define NR_MIXERS	6
+
+static void vop2_setup_layer_mixer(struct vop2_video_port *vp)
+{
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+	uint32_t layer_sel = 0;
+	uint32_t port_sel;
+	int nlayer, ofs;
+	struct drm_display_mode *adjusted_mode;
+	uint16_t hsync_len;
+	uint16_t hdisplay;
+	uint32_t bg_dly;
+	uint32_t pre_scan_dly;
+	int i;
+	struct vop2_video_port *vp0 = &vop2->vps[0];
+	struct vop2_video_port *vp1 = &vop2->vps[1];
+	struct vop2_video_port *vp2 = &vop2->vps[2];
+
+	adjusted_mode = &vp->crtc.state->adjusted_mode;
+	hsync_len = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
+	hdisplay = adjusted_mode->crtc_hdisplay;
+
+	bg_dly = vp->data->pre_scan_max_dly[3];
+	vop2_writel(vop2, RK3568_VP_BG_MIX_CTRL(vp->id),
+			    FIELD_PREP(RK3568_VP_BG_MIX_CTRL__BG_DLY, bg_dly));
+
+	pre_scan_dly = ((bg_dly + (hdisplay >> 1) - 1) << 16) | hsync_len;
+	vop2_vp_write(vp, RK3568_VP_PRE_SCAN_HTIMING, pre_scan_dly);
+
+	vop2_writel(vop2, RK3568_OVL_CTRL, 0);
+	port_sel = vop2_readl(vop2, RK3568_OVL_PORT_SEL);
+	port_sel &= RK3568_OVL_PORT_SEL__SEL_PORT;
+
+	if (vp0->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX,
+				     vp0->nlayers - 1);
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT0_MUX, 8);
+
+	if (vp1->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX,
+				     (vp0->nlayers + vp1->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	if (vp2->nlayers)
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT2_MUX,
+			(vp2->nlayers + vp1->nlayers + vp0->nlayers - 1));
+	else
+		port_sel |= FIELD_PREP(RK3568_OVL_PORT_SET__PORT1_MUX, 8);
+
+	layer_sel = vop2_readl(vop2, RK3568_OVL_LAYER_SEL);
+
+	ofs = 0;
+	for (i = 0; i < vp->id; i++)
+		ofs += vop2->vps[i].nlayers;
+
+	nlayer = 0;
+	drm_atomic_crtc_for_each_plane(plane, &vp->crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__CLUSTER1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__CLUSTER1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__ESMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__ESMART1, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART0;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART0, vp->id);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			port_sel &= ~RK3568_OVL_PORT_SEL__SMART1;
+			port_sel |= FIELD_PREP(RK3568_OVL_PORT_SEL__SMART1, vp->id);
+			break;
+		}
+
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, win->data->layer_sel_id);
+		nlayer++;
+	}
+
+	/* configure unused layers to 0x5 (reserved) */
+	for (; nlayer < 3; nlayer++) {
+		layer_sel &= ~RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 0x7);
+		layer_sel |= RK3568_OVL_LAYER_SEL__LAYER(nlayer + ofs, 5);
+	}
+
+	vop2_writel(vop2, RK3568_OVL_LAYER_SEL, layer_sel);
+	vop2_writel(vop2, RK3568_OVL_PORT_SEL, port_sel);
+	vop2_writel(vop2, RK3568_OVL_CTRL, RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD);
+}
+
+static void vop2_setup_dly_for_windows(struct vop2 *vop2)
+{
+	struct vop2_win *win;
+	int i = 0;
+	uint32_t cdly = 0, sdly = 0;
+
+	for (i = 0; i < vop2->data->win_size; i++) {
+		uint32_t dly;
+
+		win = &vop2->win[i];
+		dly = win->delay;
+
+		switch (win->data->phys_id) {
+		case ROCKCHIP_VOP2_CLUSTER0:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER0_1, dly);
+			break;
+		case ROCKCHIP_VOP2_CLUSTER1:
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_0, dly);
+			cdly |= FIELD_PREP(RK3568_CLUSTER_DLY_NUM__CLUSTER1_1, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART0, dly);
+			break;
+		case ROCKCHIP_VOP2_ESMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__ESMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART0:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART1, dly);
+			break;
+		case ROCKCHIP_VOP2_SMART1:
+			sdly |= FIELD_PREP(RK3568_SMART_DLY_NUM__SMART0, dly);
+			break;
+		}
+	}
+
+	vop2_writel(vop2, RK3568_CLUSTER_DLY_NUM, cdly);
+	vop2_writel(vop2, RK3568_SMART_DLY_NUM, sdly);
+}
+
+static void vop2_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+	struct vop2 *vop2 = vp->vop2;
+	struct drm_plane *plane;
+
+	vp->win_mask = 0;
+
+	drm_atomic_crtc_for_each_plane(plane, crtc) {
+		struct vop2_win *win = to_vop2_win(plane);
+
+		win->delay = win->data->dly[VOP2_DLY_MODE_DEFAULT];
+
+		vp->win_mask |= BIT(win->data->phys_id);
+
+		if (vop2_cluster_window(win))
+			vop2_setup_cluster_alpha(vop2, win);
+	}
+
+	if (!vp->win_mask)
+		return;
+
+	vop2_setup_layer_mixer(vp);
+	vop2_setup_alpha(vp);
+	vop2_setup_dly_for_windows(vop2);
+}
+
+static void vop2_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_atomic_state *state)
+{
+	struct vop2_video_port *vp = to_vop2_video_port(crtc);
+
+	vop2_post_config(crtc);
+
+	vop2_cfg_done(vp);
+
+	spin_lock_irq(&crtc->dev->event_lock);
+
+	if (crtc->state->event) {
+		WARN_ON(drm_crtc_vblank_get(crtc));
+		vp->event = crtc->state->event;
+		crtc->state->event = NULL;
+	}
+
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_helper_funcs vop2_crtc_helper_funcs = {
+	.mode_fixup = vop2_crtc_mode_fixup,
+	.atomic_check = vop2_crtc_atomic_check,
+	.atomic_begin = vop2_crtc_atomic_begin,
+	.atomic_flush = vop2_crtc_atomic_flush,
+	.atomic_enable = vop2_crtc_atomic_enable,
+	.atomic_disable = vop2_crtc_atomic_disable,
+};
+
+static void vop2_crtc_reset(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(crtc->state);
+
+	if (crtc->state) {
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
+		kfree(vcstate);
+	}
+
+	vcstate = kzalloc(sizeof(*vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return;
+
+	crtc->state = &vcstate->base;
+	crtc->state->crtc = crtc;
+}
+
+static struct drm_crtc_state *vop2_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+	struct rockchip_crtc_state *vcstate, *old_vcstate;
+
+	old_vcstate = to_rockchip_crtc_state(crtc->state);
+
+	vcstate = kmemdup(old_vcstate, sizeof(*old_vcstate), GFP_KERNEL);
+	if (!vcstate)
+		return NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &vcstate->base);
+
+	return &vcstate->base;
+}
+
+static void vop2_crtc_destroy_state(struct drm_crtc *crtc,
+				    struct drm_crtc_state *state)
+{
+	struct rockchip_crtc_state *vcstate = to_rockchip_crtc_state(state);
+
+	__drm_atomic_helper_crtc_destroy_state(&vcstate->base);
+	kfree(vcstate);
+}
+
+static const struct drm_crtc_funcs vop2_crtc_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.destroy = drm_crtc_cleanup,
+	.reset = vop2_crtc_reset,
+	.atomic_duplicate_state = vop2_crtc_duplicate_state,
+	.atomic_destroy_state = vop2_crtc_destroy_state,
+	.enable_vblank = vop2_crtc_enable_vblank,
+	.disable_vblank = vop2_crtc_disable_vblank,
+};
+
+static irqreturn_t vop2_isr(int irq, void *data)
+{
+	struct vop2 *vop2 = data;
+	const struct vop2_data *vop2_data = vop2->data;
+	uint32_t axi_irqs[VOP2_SYS_AXI_BUS_NUM];
+	int ret = IRQ_NONE;
+	int i;
+
+	/*
+	 * The irq is shared with the iommu. If the runtime-pm state of the
+	 * vop2-device is disabled the irq has to be targeted at the iommu.
+	 */
+	if (!pm_runtime_get_if_in_use(vop2->dev))
+		return IRQ_NONE;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		struct drm_crtc *crtc = &vp->crtc;
+		uint32_t irqs;
+
+		irqs = vop2_readl(vop2, RK3568_VP_INT_STATUS(vp->id));
+		vop2_writel(vop2, RK3568_VP_INT_CLR(vp->id), irqs << 16 | irqs);
+
+		if (irqs & VP_INT_DSP_HOLD_VALID) {
+			complete(&vp->dsp_hold_completion);
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_FS_FIELD) {
+			unsigned long flags;
+
+			drm_crtc_handle_vblank(crtc);
+			spin_lock_irqsave(&crtc->dev->event_lock, flags);
+			if (vp->event) {
+				uint32_t val = vop2_readl(vop2, RK3568_REG_CFG_DONE);
+				if (!(val & BIT(vp->id))) {
+					drm_crtc_send_vblank_event(crtc, vp->event);
+					vp->event = NULL;
+					drm_crtc_vblank_put(crtc);
+				}
+			}
+			spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+
+			ret = IRQ_HANDLED;
+		}
+
+		if (irqs & VP_INT_POST_BUF_EMPTY) {
+			drm_err_ratelimited(vop2->drm,
+					    "POST_BUF_EMPTY irq err at vp%d\n",
+					    vp->id);
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	axi_irqs[0] = vop2_readl(vop2, RK3568_SYS0_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS0_INT_CLR, axi_irqs[0] << 16 | axi_irqs[0]);
+	axi_irqs[1] = vop2_readl(vop2, RK3568_SYS1_INT_STATUS);
+	vop2_writel(vop2, RK3568_SYS1_INT_CLR, axi_irqs[1] << 16 | axi_irqs[1]);
+
+	for (i = 0; i < ARRAY_SIZE(axi_irqs); i++) {
+		if (axi_irqs[i] & VOP2_INT_BUS_ERRPR) {
+			drm_err_ratelimited(vop2->drm, "BUS_ERROR irq err\n");
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	pm_runtime_put(vop2->dev);
+
+	return ret;
+}
+
+static int vop2_plane_init(struct vop2 *vop2, struct vop2_win *win, unsigned long possible_crtcs)
+{
+	const struct vop2_win_data *win_data = win->data;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | BIT(DRM_MODE_BLEND_PREMULTI) |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
+	int ret;
+
+	ret = drm_universal_plane_init(vop2->drm, &win->base, possible_crtcs,
+				       &vop2_plane_funcs, win_data->formats, win_data->nformats,
+				       win_data->format_modifiers, win->type, win_data->name);
+	if (ret) {
+		drm_err(vop2->drm, "failed to initialize plane %d\n", ret);
+		return ret;
+	}
+
+	drm_plane_helper_add(&win->base, &vop2_plane_helper_funcs);
+
+	if (win->data->supported_rotations)
+		drm_plane_create_rotation_property(&win->base, DRM_MODE_ROTATE_0,
+						   DRM_MODE_ROTATE_0 |
+						   win->data->supported_rotations);
+	drm_plane_create_alpha_property(&win->base);
+	drm_plane_create_blend_mode_property(&win->base, blend_caps);
+	drm_plane_create_zpos_property(&win->base, win->win_id, 0,
+				       vop2->registered_num_wins - 1);
+
+	return 0;
+}
+
+static struct vop2_video_port *get_activated_vp(struct vop2 *vop2, int n)
+{
+	int i, id = 0;
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		if (n == id)
+			return vp;
+		id++;
+	}
+
+	return NULL;
+}
+
+static int vop2_create_crtc(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct drm_device *drm = vop2->drm;
+	struct device *dev = vop2->dev;
+	struct drm_plane *plane;
+	struct device_node *port;
+	struct vop2_video_port *vp;
+	uint32_t possible_crtcs;
+	int i, nvp, nvps = 0;
+	int ret;
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		const struct vop2_video_port_data *vp_data;
+		struct device_node *np;
+		char dclk_name[9];
+
+		vp_data = &vop2_data->vp[i];
+		vp = &vop2->vps[i];
+		vp->vop2 = vop2;
+		vp->id = vp_data->id;
+		vp->regs = vp_data->regs;
+		vp->data = vp_data;
+
+		snprintf(dclk_name, sizeof(dclk_name), "dclk_vp%d", vp->id);
+		vp->dclk = devm_clk_get(vop2->dev, dclk_name);
+		if (IS_ERR(vp->dclk)) {
+			drm_err(vop2->drm, "failed to get %s\n", dclk_name);
+			return PTR_ERR(vp->dclk);
+		}
+
+		np = of_graph_get_remote_node(dev->of_node, i, -1);
+		if (!np) {
+			printk("%s: No remote for vp%d\n", __func__, i);
+			continue;
+		}
+		of_node_put(np);
+
+		port = of_graph_get_port_by_id(dev->of_node, i);
+		if (!port) {
+			drm_err(vop2->drm, "no port node found for video_port%d\n", i);
+			return -ENOENT;
+		}
+
+		vp->crtc.port = port;
+		nvps++;
+	}
+
+	nvp = 0;
+	for (i = 0; i < vop2->registered_num_wins; i++) {
+		struct vop2_win *win = &vop2->win[i];
+
+		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
+			vp = get_activated_vp(vop2, nvp);
+
+			if (vp) {
+				possible_crtcs = BIT(nvp);
+				vp->primary_plane = win;
+
+				nvp++;
+			} else {
+				/* change the unused primary window to overlay window */
+				win->type = DRM_PLANE_TYPE_OVERLAY;
+			}
+		}
+
+		if (win->type == DRM_PLANE_TYPE_OVERLAY)
+			possible_crtcs = (1 << vop2_data->nr_vps) - 1;
+
+		ret = vop2_plane_init(vop2, win, possible_crtcs);
+
+		if (ret) {
+			drm_err(vop2->drm, "failed to init plane %s: %d\n", win->data->name, ret);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < vop2_data->nr_vps; i++) {
+		vp = &vop2->vps[i];
+
+		if (!vp->crtc.port)
+			continue;
+
+		plane = &vp->primary_plane->base;
+
+		ret = drm_crtc_init_with_planes(drm, &vp->crtc, plane, NULL, &vop2_crtc_funcs,
+						"video_port%d", vp->id);
+		if (ret) {
+			drm_err(vop2->drm, "crtc init for video_port%d failed\n", i);
+			return ret;
+		}
+
+		drm_crtc_helper_add(&vp->crtc, &vop2_crtc_helper_funcs);
+
+		init_completion(&vp->dsp_hold_completion);
+	}
+
+	for (i = 0; i < vop2->data->nr_vps; i++) {
+		struct vop2_video_port *vp = &vop2->vps[i];
+		if (vp->crtc.port)
+			vp->nlayers = NR_MIXERS / nvps;
+	}
+
+	return 0;
+}
+
+static void vop2_destroy_crtc(struct drm_crtc *crtc)
+{
+	of_node_put(crtc->port);
+
+	/*
+	 * Destroy CRTC after vop2_plane_destroy() since vop2_disable_plane()
+	 * references the CRTC.
+	 */
+	drm_crtc_cleanup(crtc);
+}
+
+static int vop2_cluster_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_cluster_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 1, 5),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 14, 14),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 18, 18),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_ST, 0, 31),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_CLUSTER_WIN_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_CLUSTER_WIN_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 19, 19),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 8, 8),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 9, 9),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 10, 11),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 14, 15),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 12, 13),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 2, 3),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 28, 28),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 29, 29),
+
+		/* cluster regs */
+		[VOP2_WIN_AFBC_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 1, 1),
+		[VOP2_WIN_CLUSTER_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 0, 0),
+		[VOP2_WIN_CLUSTER_LB_MODE] = REG_FIELD(RK3568_CLUSTER_CTRL, 4, 7),
+
+		/* afbc regs */
+		[VOP2_WIN_AFBC_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 2, 6),
+		[VOP2_WIN_AFBC_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 9, 9),
+		[VOP2_WIN_AFBC_UV_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 10, 10),
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL, 4, 4),
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 7, 7),
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 8, 8),
+		[VOP2_WIN_AFBC_HDR_PTR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_HDR_PTR, 0, 31),
+		[VOP2_WIN_AFBC_PIC_SIZE] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE, 0, 31),
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 0, 15),
+		[VOP2_WIN_AFBC_TILE_NUM] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 16, 31),
+		[VOP2_WIN_AFBC_PIC_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_DSP_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET, 0, 31),
+		[VOP2_WIN_AFBC_ROTATE_90] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 0, 0),
+		[VOP2_WIN_AFBC_ROTATE_270] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 1, 1),
+		[VOP2_WIN_XMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 2, 2),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 3, 3),
+		[VOP2_WIN_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY] = { .reg = 0xffffffff },
+		[VOP2_WIN_COLOR_KEY_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_X] = { .reg = 0xffffffff },
+		[VOP2_WIN_SCALE_CBCR_Y] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT2] = { .reg = 0xffffffff },
+		[VOP2_WIN_VSD_CBCR_GT4] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_cluster_regs); i++)
+		vop2_cluster_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_cluster_regs,
+					    ARRAY_SIZE(vop2_cluster_regs));
+};
+
+static int vop2_esmart_init(struct vop2_win *win)
+{
+	struct vop2 *vop2 = win->vop2;
+	int i;
+	struct reg_field vop2_esmart_regs[VOP2_WIN_MAX_REG] = {
+		[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 0, 0),
+		[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 1, 5),
+		[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 12, 12),
+		[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 14, 14),
+		[VOP2_WIN_UV_SWAP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 16, 16),
+		[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_SMART_REGION0_ACT_INFO, 0, 31),
+		[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_SMART_REGION0_DSP_INFO, 0, 31),
+		[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_SMART_REGION0_DSP_ST, 0, 28),
+		[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_SMART_REGION0_YRGB_MST, 0, 31),
+		[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_SMART_REGION0_CBR_MST, 0, 31),
+		[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 17, 17),
+		[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 0, 15),
+		[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_SMART_REGION0_VIR, 16, 31),
+		[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_SMART_CTRL0, 0, 0),
+		[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_SMART_CTRL0, 1, 1),
+		[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_SMART_CTRL0, 2, 3),
+		[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_SMART_CTRL1, 31, 31),
+		[VOP2_WIN_COLOR_KEY] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 0, 29),
+		[VOP2_WIN_COLOR_KEY_EN] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 31, 31),
+
+		/* Scale */
+		[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 0, 15),
+		[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB, 16, 31),
+		[VOP2_WIN_SCALE_CBCR_X] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 0, 15),
+		[VOP2_WIN_SCALE_CBCR_Y] = REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_CBR, 16, 31),
+		[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 0, 1),
+		[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 2, 3),
+		[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 4, 5),
+		[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 6, 7),
+		[VOP2_WIN_CBCR_HOR_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 8, 9),
+		[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 10, 11),
+		[VOP2_WIN_CBCR_VER_SCL_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 12, 13),
+		[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 14, 15),
+		[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_SMART_REGION0_SCL_CTRL, 16, 17),
+		[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 8, 8),
+		[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 9, 9),
+		[VOP2_WIN_VSD_CBCR_GT2] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 10, 10),
+		[VOP2_WIN_VSD_CBCR_GT4] = REG_FIELD(RK3568_SMART_REGION0_CTRL, 11, 11),
+		[VOP2_WIN_XMIRROR] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ENABLE] = { .reg = 0xffffffff },
+		[VOP2_WIN_CLUSTER_LB_MODE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_FORMAT] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_RB_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_UV_SWAP] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_AUTO_GATING_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TILE_NUM] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_PIC_SIZE] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_DSP_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HDR_PTR] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_HALF_BLOCK_EN] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_270] = { .reg = 0xffffffff },
+		[VOP2_WIN_AFBC_ROTATE_90] = { .reg = 0xffffffff },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(vop2_esmart_regs); i++)
+		vop2_esmart_regs[i].reg += win->offset;
+
+	return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
+					    vop2_esmart_regs,
+					    ARRAY_SIZE(vop2_esmart_regs));
+};
+
+static int vop2_win_init(struct vop2 *vop2)
+{
+	const struct vop2_data *vop2_data = vop2->data;
+	struct vop2_win *win;
+	int i, ret;
+
+	for (i = 0; i < vop2_data->win_size; i++) {
+		const struct vop2_win_data *win_data = &vop2_data->win[i];
+
+		win = &vop2->win[i];
+		win->data = win_data;
+		win->type = win_data->type;
+		win->offset = win_data->base;
+		win->win_id = i;
+		win->vop2 = vop2;
+		if (vop2_cluster_window(win))
+			ret = vop2_cluster_init(win);
+		else
+			ret = vop2_esmart_init(win);
+		if (ret)
+			return ret;
+	}
+
+	vop2->registered_num_wins = vop2_data->win_size;
+
+	return 0;
+}
+
+/*
+ * The window registers are only updated when config done is written.
+ * Until that they read back the old value. As we read-modify-write
+ * these registers mark them as non-volatile. This makes sure we read
+ * the new values from the regmap register cache.
+ */
+static const struct regmap_range vop2_nonvolatile_range[] = {
+	regmap_reg_range(0x1000, 0x23ff),
+};
+
+static const struct regmap_access_table vop2_volatile_table = {
+	.no_ranges = vop2_nonvolatile_range,
+	.n_no_ranges = ARRAY_SIZE(vop2_nonvolatile_range),
+};
+
+static const struct regmap_config vop2_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x3000,
+	.name		= "vop2",
+	.volatile_table	= &vop2_volatile_table,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int vop2_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct vop2_data *vop2_data;
+	struct drm_device *drm = data;
+	struct vop2 *vop2;
+	struct resource *res;
+	size_t alloc_size;
+	int ret;
+
+	vop2_data = of_device_get_match_data(dev);
+	if (!vop2_data)
+		return -ENODEV;
+
+	/* Allocate vop2 struct and its vop2_win array */
+	alloc_size = sizeof(*vop2) + sizeof(*vop2->win) * vop2_data->win_size;
+	vop2 = devm_kzalloc(dev, alloc_size, GFP_KERNEL);
+	if (!vop2)
+		return -ENOMEM;
+
+	vop2->dev = dev;
+	vop2->data = vop2_data;
+	vop2->drm = drm;
+
+	dev_set_drvdata(dev, vop2);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!res) {
+		drm_err(vop2->drm, "failed to get vop2 register byname\n");
+		return -EINVAL;
+	}
+
+	vop2->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vop2->regs))
+		return PTR_ERR(vop2->regs);
+	vop2->len = resource_size(res);
+
+	vop2->map = devm_regmap_init_mmio(dev, vop2->regs, &vop2_regmap_config);
+
+	ret = vop2_win_init(vop2);
+	if (ret)
+		return ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gamma_lut");
+	if (res) {
+		vop2->lut_regs = devm_ioremap_resource(dev, res);
+		if (IS_ERR(vop2->lut_regs))
+			return PTR_ERR(vop2->lut_regs);
+	}
+
+	vop2->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+
+	vop2->hclk = devm_clk_get(vop2->dev, "hclk");
+	if (IS_ERR(vop2->hclk)) {
+		drm_err(vop2->drm, "failed to get hclk source\n");
+		return PTR_ERR(vop2->hclk);
+	}
+
+	vop2->aclk = devm_clk_get(vop2->dev, "aclk");
+	if (IS_ERR(vop2->aclk)) {
+		drm_err(vop2->drm, "failed to get aclk source\n");
+		return PTR_ERR(vop2->aclk);
+	}
+
+	vop2->irq = platform_get_irq(pdev, 0);
+	if (vop2->irq < 0) {
+		drm_err(vop2->drm, "cannot find irq for vop2\n");
+		return vop2->irq;
+	}
+
+	mutex_init(&vop2->vop2_lock);
+
+	ret = devm_request_irq(dev, vop2->irq, vop2_isr, IRQF_SHARED, dev_name(dev), vop2);
+	if (ret)
+		return ret;
+
+	ret = rockchip_drm_dma_attach_device(vop2->drm, vop2->dev);
+	if (ret) {
+		drm_err(vop2->drm, "failed to attach dma mapping, %d\n", ret);
+		return ret;
+	}
+
+	ret = vop2_create_crtc(vop2);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static void vop2_unbind(struct device *dev, struct device *master, void *data)
+{
+	struct vop2 *vop2 = dev_get_drvdata(dev);
+	struct drm_device *drm = vop2->drm;
+	struct list_head *plane_list = &drm->mode_config.plane_list;
+	struct list_head *crtc_list = &drm->mode_config.crtc_list;
+	struct drm_crtc *crtc, *tmpc;
+	struct drm_plane *plane, *tmpp;
+
+	rockchip_drm_dma_detach_device(vop2->drm, vop2->dev);
+
+	pm_runtime_disable(dev);
+
+	list_for_each_entry_safe(plane, tmpp, plane_list, head)
+		drm_plane_cleanup(plane);
+
+	list_for_each_entry_safe(crtc, tmpc, crtc_list, head)
+		vop2_destroy_crtc(crtc);
+}
+
+const struct component_ops vop2_component_ops = {
+	.bind = vop2_bind,
+	.unbind = vop2_unbind,
+};
+EXPORT_SYMBOL_GPL(vop2_component_ops);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
new file mode 100644
index 000000000000..bb5677ff00e9
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:Mark Yao <mark.yao@rock-chips.com>
+ */
+
+#ifndef _ROCKCHIP_DRM_VOP2_H
+#define _ROCKCHIP_DRM_VOP2_H
+
+#include "rockchip_drm_vop.h"
+
+#include <linux/regmap.h>
+#include <drm/drm_modes.h>
+
+#define VOP_FEATURE_OUTPUT_10BIT        BIT(0)
+
+#define WIN_FEATURE_AFBDC		BIT(0)
+#define WIN_FEATURE_CLUSTER		BIT(1)
+
+/*
+ *  the delay number of a window in different mode.
+ */
+enum win_dly_mode {
+	VOP2_DLY_MODE_DEFAULT,   /**< default mode */
+	VOP2_DLY_MODE_HISO_S,    /** HDR in SDR out mode, as a SDR window */
+	VOP2_DLY_MODE_HIHO_H,    /** HDR in HDR out mode, as a HDR window */
+	VOP2_DLY_MODE_MAX,
+};
+
+struct vop_rect {
+	int width;
+	int height;
+};
+
+enum vop2_scale_up_mode {
+	VOP2_SCALE_UP_NRST_NBOR,
+	VOP2_SCALE_UP_BIL,
+	VOP2_SCALE_UP_BIC,
+};
+
+enum vop2_scale_down_mode {
+	VOP2_SCALE_DOWN_NRST_NBOR,
+	VOP2_SCALE_DOWN_BIL,
+	VOP2_SCALE_DOWN_AVG,
+};
+
+enum vop2_win_regs {
+	VOP2_WIN_ENABLE,
+	VOP2_WIN_FORMAT,
+	VOP2_WIN_CSC_MODE,
+	VOP2_WIN_XMIRROR,
+	VOP2_WIN_YMIRROR,
+	VOP2_WIN_RB_SWAP,
+	VOP2_WIN_UV_SWAP,
+	VOP2_WIN_ACT_INFO,
+	VOP2_WIN_DSP_INFO,
+	VOP2_WIN_DSP_ST,
+	VOP2_WIN_YRGB_MST,
+	VOP2_WIN_UV_MST,
+	VOP2_WIN_YRGB_VIR,
+	VOP2_WIN_UV_VIR,
+	VOP2_WIN_YUV_CLIP,
+	VOP2_WIN_Y2R_EN,
+	VOP2_WIN_R2Y_EN,
+	VOP2_WIN_COLOR_KEY,
+	VOP2_WIN_COLOR_KEY_EN,
+	VOP2_WIN_DITHER_UP,
+
+	/* scale regs */
+	VOP2_WIN_SCALE_YRGB_X,
+	VOP2_WIN_SCALE_YRGB_Y,
+	VOP2_WIN_SCALE_CBCR_X,
+	VOP2_WIN_SCALE_CBCR_Y,
+	VOP2_WIN_YRGB_HOR_SCL_MODE,
+	VOP2_WIN_YRGB_HSCL_FILTER_MODE,
+	VOP2_WIN_YRGB_VER_SCL_MODE,
+	VOP2_WIN_YRGB_VSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_VER_SCL_MODE,
+	VOP2_WIN_CBCR_HSCL_FILTER_MODE,
+	VOP2_WIN_CBCR_HOR_SCL_MODE,
+	VOP2_WIN_CBCR_VSCL_FILTER_MODE,
+	VOP2_WIN_VSD_CBCR_GT2,
+	VOP2_WIN_VSD_CBCR_GT4,
+	VOP2_WIN_VSD_YRGB_GT2,
+	VOP2_WIN_VSD_YRGB_GT4,
+	VOP2_WIN_BIC_COE_SEL,
+
+	/* cluster regs */
+	VOP2_WIN_CLUSTER_ENABLE,
+	VOP2_WIN_AFBC_ENABLE,
+	VOP2_WIN_CLUSTER_LB_MODE,
+
+	/* afbc regs */
+	VOP2_WIN_AFBC_FORMAT,
+	VOP2_WIN_AFBC_RB_SWAP,
+	VOP2_WIN_AFBC_UV_SWAP,
+	VOP2_WIN_AFBC_AUTO_GATING_EN,
+	VOP2_WIN_AFBC_BLOCK_SPLIT_EN,
+	VOP2_WIN_AFBC_PIC_VIR_WIDTH,
+	VOP2_WIN_AFBC_TILE_NUM,
+	VOP2_WIN_AFBC_PIC_OFFSET,
+	VOP2_WIN_AFBC_PIC_SIZE,
+	VOP2_WIN_AFBC_DSP_OFFSET,
+	VOP2_WIN_AFBC_TRANSFORM_OFFSET,
+	VOP2_WIN_AFBC_HDR_PTR,
+	VOP2_WIN_AFBC_HALF_BLOCK_EN,
+	VOP2_WIN_AFBC_ROTATE_270,
+	VOP2_WIN_AFBC_ROTATE_90,
+	VOP2_WIN_MAX_REG,
+};
+
+struct vop2_win_data {
+	const char *name;
+	uint8_t phys_id;
+
+	uint32_t base;
+	enum drm_plane_type type;
+
+	uint32_t nformats;
+	const uint32_t *formats;
+	const uint64_t *format_modifiers;
+	const unsigned int supported_rotations;
+
+	/**
+	 * @layer_sel_id: defined by register OVERLAY_LAYER_SEL of VOP2
+	 */
+	int layer_sel_id;
+	uint64_t feature;
+
+	unsigned int max_upscale_factor;
+	unsigned int max_downscale_factor;
+	const uint8_t dly[VOP2_DLY_MODE_MAX];
+};
+
+struct vop2_video_port_data {
+	char id;
+	uint32_t feature;
+	uint16_t gamma_lut_len;
+	uint16_t cubic_lut_len;
+	struct vop_rect max_output;
+	const u8 pre_scan_max_dly[4];
+	const struct vop2_video_port_regs *regs;
+	int offset;
+};
+
+struct vop2_data {
+	uint8_t nr_vps;
+	uint8_t nr_mixers;
+	uint8_t nr_layers;
+	uint8_t nr_gammas;
+	const struct vop2_ctrl *ctrl;
+	const struct vop2_win_data *win;
+	const struct vop2_video_port_data *vp;
+	const struct vop_csc_table *csc_table;
+	struct vop_rect max_input;
+	struct vop_rect max_output;
+
+	unsigned int win_size;
+	unsigned int soc_id;
+};
+
+/* interrupt define */
+#define FS_NEW_INTR			BIT(4)
+#define ADDR_SAME_INTR			BIT(5)
+#define LINE_FLAG1_INTR			BIT(6)
+#define WIN0_EMPTY_INTR			BIT(7)
+#define WIN1_EMPTY_INTR			BIT(8)
+#define WIN2_EMPTY_INTR			BIT(9)
+#define WIN3_EMPTY_INTR			BIT(10)
+#define HWC_EMPTY_INTR			BIT(11)
+#define POST_BUF_EMPTY_INTR		BIT(12)
+#define PWM_GEN_INTR			BIT(13)
+#define DMA_FINISH_INTR			BIT(14)
+#define FS_FIELD_INTR			BIT(15)
+#define FE_INTR				BIT(16)
+#define WB_UV_FIFO_FULL_INTR		BIT(17)
+#define WB_YRGB_FIFO_FULL_INTR		BIT(18)
+#define WB_COMPLETE_INTR		BIT(19)
+
+/*
+ * display output interface supported by rockchip lcdc
+ */
+#define ROCKCHIP_OUT_MODE_P888		0
+#define ROCKCHIP_OUT_MODE_BT1120	0
+#define ROCKCHIP_OUT_MODE_P666		1
+#define ROCKCHIP_OUT_MODE_P565		2
+#define ROCKCHIP_OUT_MODE_BT656		5
+#define ROCKCHIP_OUT_MODE_S888		8
+#define ROCKCHIP_OUT_MODE_S888_DUMMY	12
+#define ROCKCHIP_OUT_MODE_YUV420	14
+/* for use special outface */
+#define ROCKCHIP_OUT_MODE_AAAA		15
+
+enum vop_csc_format {
+	CSC_BT601L,
+	CSC_BT709L,
+	CSC_BT601F,
+	CSC_BT2020,
+};
+
+enum src_factor_mode {
+	SRC_FAC_ALPHA_ZERO,
+	SRC_FAC_ALPHA_ONE,
+	SRC_FAC_ALPHA_DST,
+	SRC_FAC_ALPHA_DST_INVERSE,
+	SRC_FAC_ALPHA_SRC,
+	SRC_FAC_ALPHA_SRC_GLOBAL,
+};
+
+enum dst_factor_mode {
+	DST_FAC_ALPHA_ZERO,
+	DST_FAC_ALPHA_ONE,
+	DST_FAC_ALPHA_SRC,
+	DST_FAC_ALPHA_SRC_INVERSE,
+	DST_FAC_ALPHA_DST,
+	DST_FAC_ALPHA_DST_GLOBAL,
+};
+
+#define RK3568_GRF_VO_CON1			0x0364
+/* System registers definition */
+#define RK3568_REG_CFG_DONE			0x000
+#define RK3568_VERSION_INFO			0x004
+#define RK3568_SYS_AUTO_GATING_CTRL		0x008
+#define RK3568_SYS_AXI_LUT_CTRL			0x024
+#define RK3568_DSP_IF_EN			0x028
+#define RK3568_DSP_IF_CTRL			0x02c
+#define RK3568_DSP_IF_POL			0x030
+#define RK3568_WB_CTRL				0x40
+#define RK3568_WB_XSCAL_FACTOR			0x44
+#define RK3568_WB_YRGB_MST			0x48
+#define RK3568_WB_CBR_MST			0x4C
+#define RK3568_OTP_WIN_EN			0x050
+#define RK3568_LUT_PORT_SEL			0x058
+#define RK3568_SYS_STATUS0			0x060
+#define RK3568_VP_LINE_FLAG(vp)			(0x70 + (vp) * 0x4)
+#define RK3568_SYS0_INT_EN			0x80
+#define RK3568_SYS0_INT_CLR			0x84
+#define RK3568_SYS0_INT_STATUS			0x88
+#define RK3568_SYS1_INT_EN			0x90
+#define RK3568_SYS1_INT_CLR			0x94
+#define RK3568_SYS1_INT_STATUS			0x98
+#define RK3568_VP_INT_EN(vp)			(0xA0 + (vp) * 0x10)
+#define RK3568_VP_INT_CLR(vp)			(0xA4 + (vp) * 0x10)
+#define RK3568_VP_INT_STATUS(vp)		(0xA8 + (vp) * 0x10)
+#define RK3568_VP_INT_RAW_STATUS(vp)		(0xAC + (vp) * 0x10)
+
+/* Video Port registers definition */
+#define RK3568_VP_DSP_CTRL			0x00
+#define RK3568_VP_MIPI_CTRL			0x04
+#define RK3568_VP_COLOR_BAR_CTRL		0x08
+#define RK3568_VP_3D_LUT_CTRL			0x10
+#define RK3568_VP_3D_LUT_MST			0x20
+#define RK3568_VP_DSP_BG			0x2C
+#define RK3568_VP_PRE_SCAN_HTIMING		0x30
+#define RK3568_VP_POST_DSP_HACT_INFO		0x34
+#define RK3568_VP_POST_DSP_VACT_INFO		0x38
+#define RK3568_VP_POST_SCL_FACTOR_YRGB		0x3C
+#define RK3568_VP_POST_SCL_CTRL			0x40
+#define RK3568_VP_POST_DSP_VACT_INFO_F1		0x44
+#define RK3568_VP_DSP_HTOTAL_HS_END		0x48
+#define RK3568_VP_DSP_HACT_ST_END		0x4C
+#define RK3568_VP_DSP_VTOTAL_VS_END		0x50
+#define RK3568_VP_DSP_VACT_ST_END		0x54
+#define RK3568_VP_DSP_VS_ST_END_F1		0x58
+#define RK3568_VP_DSP_VACT_ST_END_F1		0x5C
+#define RK3568_VP_BCSH_CTRL			0x60
+#define RK3568_VP_BCSH_BCS			0x64
+#define RK3568_VP_BCSH_H			0x68
+#define RK3568_VP_BCSH_COLOR_BAR		0x6C
+
+/* Overlay registers definition    */
+#define RK3568_OVL_CTRL				0x600
+#define RK3568_OVL_LAYER_SEL			0x604
+#define RK3568_OVL_PORT_SEL			0x608
+#define RK3568_CLUSTER0_MIX_SRC_COLOR_CTRL	0x610
+#define RK3568_CLUSTER0_MIX_DST_COLOR_CTRL	0x614
+#define RK3568_CLUSTER0_MIX_SRC_ALPHA_CTRL	0x618
+#define RK3568_CLUSTER0_MIX_DST_ALPHA_CTRL	0x61C
+#define RK3568_MIX0_SRC_COLOR_CTRL		0x650
+#define RK3568_MIX0_DST_COLOR_CTRL		0x654
+#define RK3568_MIX0_SRC_ALPHA_CTRL		0x658
+#define RK3568_MIX0_DST_ALPHA_CTRL		0x65C
+#define RK3568_HDR0_SRC_COLOR_CTRL		0x6C0
+#define RK3568_HDR0_DST_COLOR_CTRL		0x6C4
+#define RK3568_HDR0_SRC_ALPHA_CTRL		0x6C8
+#define RK3568_HDR0_DST_ALPHA_CTRL		0x6CC
+#define RK3568_VP_BG_MIX_CTRL(vp)		(0x6E0 + (vp) * 4)
+#define RK3568_CLUSTER_DLY_NUM			0x6F0
+#define RK3568_SMART_DLY_NUM			0x6F8
+
+/* Cluster register definition, offset relative to window base */
+#define RK3568_CLUSTER_WIN_CTRL0		0x00
+#define RK3568_CLUSTER_WIN_CTRL1		0x04
+#define RK3568_CLUSTER_WIN_YRGB_MST		0x10
+#define RK3568_CLUSTER_WIN_CBR_MST		0x14
+#define RK3568_CLUSTER_WIN_VIR			0x18
+#define RK3568_CLUSTER_WIN_ACT_INFO		0x20
+#define RK3568_CLUSTER_WIN_DSP_INFO		0x24
+#define RK3568_CLUSTER_WIN_DSP_ST		0x28
+#define RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB	0x30
+#define RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET	0x3C
+#define RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL	0x50
+#define RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE	0x54
+#define RK3568_CLUSTER_WIN_AFBCD_HDR_PTR	0x58
+#define RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH	0x5C
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE	0x60
+#define RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET	0x64
+#define RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET	0x68
+#define RK3568_CLUSTER_WIN_AFBCD_CTRL		0x6C
+
+#define RK3568_CLUSTER_CTRL			0x100
+
+/* (E)smart register definition, offset relative to window base */
+#define RK3568_SMART_CTRL0			0x00
+#define RK3568_SMART_CTRL1			0x04
+#define RK3568_SMART_REGION0_CTRL		0x10
+#define RK3568_SMART_REGION0_YRGB_MST		0x14
+#define RK3568_SMART_REGION0_CBR_MST		0x18
+#define RK3568_SMART_REGION0_VIR		0x1C
+#define RK3568_SMART_REGION0_ACT_INFO		0x20
+#define RK3568_SMART_REGION0_DSP_INFO		0x24
+#define RK3568_SMART_REGION0_DSP_ST		0x28
+#define RK3568_SMART_REGION0_SCL_CTRL		0x30
+#define RK3568_SMART_REGION0_SCL_FACTOR_YRGB	0x34
+#define RK3568_SMART_REGION0_SCL_FACTOR_CBR	0x38
+#define RK3568_SMART_REGION0_SCL_OFFSET		0x3C
+#define RK3568_SMART_REGION1_CTRL		0x40
+#define RK3568_SMART_REGION1_YRGB_MST		0x44
+#define RK3568_SMART_REGION1_CBR_MST		0x48
+#define RK3568_SMART_REGION1_VIR		0x4C
+#define RK3568_SMART_REGION1_ACT_INFO		0x50
+#define RK3568_SMART_REGION1_DSP_INFO		0x54
+#define RK3568_SMART_REGION1_DSP_ST		0x58
+#define RK3568_SMART_REGION1_SCL_CTRL		0x60
+#define RK3568_SMART_REGION1_SCL_FACTOR_YRGB	0x64
+#define RK3568_SMART_REGION1_SCL_FACTOR_CBR	0x68
+#define RK3568_SMART_REGION1_SCL_OFFSET		0x6C
+#define RK3568_SMART_REGION2_CTRL		0x70
+#define RK3568_SMART_REGION2_YRGB_MST		0x74
+#define RK3568_SMART_REGION2_CBR_MST		0x78
+#define RK3568_SMART_REGION2_VIR		0x7C
+#define RK3568_SMART_REGION2_ACT_INFO		0x80
+#define RK3568_SMART_REGION2_DSP_INFO		0x84
+#define RK3568_SMART_REGION2_DSP_ST		0x88
+#define RK3568_SMART_REGION2_SCL_CTRL		0x90
+#define RK3568_SMART_REGION2_SCL_FACTOR_YRGB	0x94
+#define RK3568_SMART_REGION2_SCL_FACTOR_CBR	0x98
+#define RK3568_SMART_REGION2_SCL_OFFSET		0x9C
+#define RK3568_SMART_REGION3_CTRL		0xA0
+#define RK3568_SMART_REGION3_YRGB_MST		0xA4
+#define RK3568_SMART_REGION3_CBR_MST		0xA8
+#define RK3568_SMART_REGION3_VIR		0xAC
+#define RK3568_SMART_REGION3_ACT_INFO		0xB0
+#define RK3568_SMART_REGION3_DSP_INFO		0xB4
+#define RK3568_SMART_REGION3_DSP_ST		0xB8
+#define RK3568_SMART_REGION3_SCL_CTRL		0xC0
+#define RK3568_SMART_REGION3_SCL_FACTOR_YRGB	0xC4
+#define RK3568_SMART_REGION3_SCL_FACTOR_CBR	0xC8
+#define RK3568_SMART_REGION3_SCL_OFFSET		0xCC
+#define RK3568_SMART_COLOR_KEY_CTRL		0xD0
+
+/* HDR register definition */
+#define RK3568_HDR_LUT_CTRL			0x2000
+#define RK3568_HDR_LUT_MST			0x2004
+#define RK3568_SDR2HDR_CTRL			0x2010
+#define RK3568_HDR2SDR_CTRL			0x2020
+#define RK3568_HDR2SDR_SRC_RANGE		0x2024
+#define RK3568_HDR2SDR_NORMFACEETF		0x2028
+#define RK3568_HDR2SDR_DST_RANGE		0x202C
+#define RK3568_HDR2SDR_NORMFACCGAMMA		0x2030
+#define RK3568_HDR_EETF_OETF_Y0			0x203C
+#define RK3568_HDR_SAT_Y0			0x20C0
+#define RK3568_HDR_EOTF_OETF_Y0			0x20F0
+#define RK3568_HDR_OETF_DX_POW1			0x2200
+#define RK3568_HDR_OETF_XN1			0x2300
+
+#define RK3568_REG_CFG_DONE__GLB_CFG_DONE_EN		BIT(15)
+
+#define RK3568_VP_DSP_CTRL__STANDBY			BIT(31)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_MODE		BIT(20)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_SEL		GENMASK(19, 18)
+#define RK3568_VP_DSP_CTRL__DITHER_DOWN_EN		BIT(17)
+#define RK3568_VP_DSP_CTRL__PRE_DITHER_DOWN_EN		BIT(16)
+#define RK3568_VP_DSP_CTRL__POST_DSP_OUT_R2Y		BIT(15)
+#define RK3568_VP_DSP_CTRL__DSP_RB_SWAP			BIT(9)
+#define RK3568_VP_DSP_CTRL__DSP_INTERLACE		BIT(7)
+#define RK3568_VP_DSP_CTRL__DSP_FILED_POL		BIT(6)
+#define RK3568_VP_DSP_CTRL__P2I_EN			BIT(5)
+#define RK3568_VP_DSP_CTRL__CORE_DCLK_DIV		BIT(4)
+#define RK3568_VP_DSP_CTRL__OUT_MODE			GENMASK(3, 0)
+
+#define RK3568_VP_POST_SCL_CTRL__VSCALEDOWN		BIT(1)
+#define RK3568_VP_POST_SCL_CTRL__HSCALEDOWN		BIT(0)
+
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1_MUX		GENMASK(26, 25)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS1			BIT(24)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1_MUX		GENMASK(22, 21)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI1			BIT(20)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0_MUX		GENMASK(19, 18)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0_MUX		GENMASK(17, 16)
+#define RK3568_SYS_DSP_INFACE_EN_EDP_MUX		GENMASK(15, 14)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI_MUX		GENMASK(11, 10)
+#define RK3568_SYS_DSP_INFACE_EN_RGB_MUX		GENMASK(9, 8)
+#define RK3568_SYS_DSP_INFACE_EN_LVDS0			BIT(5)
+#define RK3568_SYS_DSP_INFACE_EN_MIPI0			BIT(4)
+#define RK3568_SYS_DSP_INFACE_EN_EDP			BIT(3)
+#define RK3568_SYS_DSP_INFACE_EN_HDMI			BIT(1)
+#define RK3568_SYS_DSP_INFACE_EN_RGB			BIT(0)
+
+#define RK3568_DSP_IF_POL__MIPI_PIN_POL			GENMASK(19, 16)
+#define RK3568_DSP_IF_POL__EDP_PIN_POL			GENMASK(15, 12)
+#define RK3568_DSP_IF_POL__HDMI_PIN_POL			GENMASK(7, 4)
+#define RK3568_DSP_IF_POL__RGB_LVDS_PIN_POL		GENMASK(3, 0)
+
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2_PHASE_LOCK	BIT(5)
+#define RK3568_VP0_MIPI_CTRL__DCLK_DIV2			BIT(4)
+
+#define RK3568_SYS_AUTO_GATING_CTRL__AUTO_GATING_EN	BIT(31)
+
+#define RK3568_DSP_IF_POL__CFG_DONE_IMD			BIT(28)
+
+#define VOP2_SYS_AXI_BUS_NUM				2
+
+#define VOP2_CLUSTER_YUV444_10				0x12
+
+#define VOP2_COLOR_KEY_MASK				BIT(31)
+
+#define RK3568_OVL_CTRL__LAYERSEL_REGDONE_IMD		BIT(28)
+
+#define RK3568_VP_BG_MIX_CTRL__BG_DLY			GENMASK(31, 24)
+
+#define RK3568_OVL_PORT_SEL__SEL_PORT			GENMASK(31, 16)
+#define RK3568_OVL_PORT_SEL__SMART1			GENMASK(31, 30)
+#define RK3568_OVL_PORT_SEL__SMART0			GENMASK(29, 28)
+#define RK3568_OVL_PORT_SEL__ESMART1			GENMASK(27, 26)
+#define RK3568_OVL_PORT_SEL__ESMART0			GENMASK(25, 24)
+#define RK3568_OVL_PORT_SEL__CLUSTER1			GENMASK(19, 18)
+#define RK3568_OVL_PORT_SEL__CLUSTER0			GENMASK(17, 16)
+#define RK3568_OVL_PORT_SET__PORT2_MUX			GENMASK(11, 8)
+#define RK3568_OVL_PORT_SET__PORT1_MUX			GENMASK(7, 4)
+#define RK3568_OVL_PORT_SET__PORT0_MUX			GENMASK(3, 0)
+#define RK3568_OVL_LAYER_SEL__LAYER(layer, x)		((x) << ((layer) * 4))
+
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_1		GENMASK(31, 24)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER1_0		GENMASK(23, 16)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_1		GENMASK(15, 8)
+#define RK3568_CLUSTER_DLY_NUM__CLUSTER0_0		GENMASK(7, 0)
+
+#define RK3568_SMART_DLY_NUM__SMART1			GENMASK(31, 24)
+#define RK3568_SMART_DLY_NUM__SMART0			GENMASK(23, 16)
+#define RK3568_SMART_DLY_NUM__ESMART1			GENMASK(15, 8)
+#define RK3568_SMART_DLY_NUM__ESMART0			GENMASK(7, 0)
+
+#define VP_INT_DSP_HOLD_VALID	BIT(6)
+#define VP_INT_FS_FIELD		BIT(5)
+#define VP_INT_POST_BUF_EMPTY	BIT(4)
+#define VP_INT_LINE_FLAG1	BIT(3)
+#define VP_INT_LINE_FLAG0	BIT(2)
+#define VOP2_INT_BUS_ERRPR	BIT(1)
+#define VP_INT_FS		BIT(0)
+
+#define POLFLAG_DCLK_INV	BIT(3)
+
+enum vop2_layer_phy_id {
+	ROCKCHIP_VOP2_CLUSTER0 = 0,
+	ROCKCHIP_VOP2_CLUSTER1,
+	ROCKCHIP_VOP2_ESMART0,
+	ROCKCHIP_VOP2_ESMART1,
+	ROCKCHIP_VOP2_SMART0,
+	ROCKCHIP_VOP2_SMART1,
+	ROCKCHIP_VOP2_CLUSTER2,
+	ROCKCHIP_VOP2_CLUSTER3,
+	ROCKCHIP_VOP2_ESMART2,
+	ROCKCHIP_VOP2_ESMART3,
+	ROCKCHIP_VOP2_PHY_ID_INVALID = -1,
+};
+
+extern const struct component_ops vop2_component_ops;
+
+#endif /* _ROCKCHIP_DRM_VOP2_H */
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
new file mode 100644
index 000000000000..2376e63d9478
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Rockchip Electronics Co.Ltd
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/component.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_print.h>
+
+#include "rockchip_drm_vop2.h"
+
+static const uint32_t formats_win_full_10bit[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+};
+
+static const uint32_t formats_win_full_10bit_yuyv[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV24,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_VYUY,
+};
+
+static const uint32_t formats_win_lite[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
+};
+
+static const uint64_t format_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const uint64_t format_modifiers_afbc[] = {
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR),
+
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_CBR |
+				AFBC_FORMAT_MOD_SPARSE),
+
+	/* SPLIT mandates SPARSE, RGB modes mandates YTR */
+	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
+				AFBC_FORMAT_MOD_YTR |
+				AFBC_FORMAT_MOD_SPARSE |
+				AFBC_FORMAT_MOD_SPLIT),
+	DRM_FORMAT_MOD_INVALID,
+};
+
+static const struct vop2_video_port_data rk3568_vop_video_ports[] = {
+	{
+		.id = 0,
+		.feature = VOP_FEATURE_OUTPUT_10BIT,
+		.gamma_lut_len = 1024,
+		.cubic_lut_len = 9 * 9 * 9,
+		.max_output = { 4096, 2304 },
+		.pre_scan_max_dly = { 69, 53, 53, 42 },
+		.offset = 0xc00,
+	}, {
+		.id = 1,
+		.gamma_lut_len = 1024,
+		.max_output = { 2048, 1536 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xd00,
+	}, {
+		.id = 2,
+		.gamma_lut_len = 1024,
+		.max_output = { 1920, 1080 },
+		.pre_scan_max_dly = { 40, 40, 40, 40 },
+		.offset = 0xe00,
+	},
+};
+
+/*
+ * rk3568 vop with 2 cluster, 2 esmart win, 2 smart win.
+ * Every cluster can work as 4K win or split into two win.
+ * All win in cluster support AFBCD.
+ *
+ * Every esmart win and smart win support 4 Multi-region.
+ *
+ * Scale filter mode:
+ *
+ * * Cluster:  bicubic for horizontal scale up, others use bilinear
+ * * ESmart:
+ *    * nearest-neighbor/bilinear/bicubic for scale up
+ *    * nearest-neighbor/bilinear/average for scale down
+ *
+ *
+ * @TODO describe the wind like cpu-map dt nodes;
+ */
+static const struct vop2_win_data rk3568_vop_win_data[] = {
+	{
+		.name = "Smart0-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART0,
+		.base = 0x1c00,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.layer_sel_id = 3,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Smart1-win0",
+		.phys_id = ROCKCHIP_VOP2_SMART1,
+		.formats = formats_win_lite,
+		.nformats = ARRAY_SIZE(formats_win_lite),
+		.format_modifiers = format_modifiers,
+		.base = 0x1e00,
+		.layer_sel_id = 7,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart1-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART1,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1a00,
+		.layer_sel_id = 6,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_PRIMARY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Esmart0-win0",
+		.phys_id = ROCKCHIP_VOP2_ESMART0,
+		.formats = formats_win_full_10bit_yuyv,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit_yuyv),
+		.format_modifiers = format_modifiers,
+		.base = 0x1800,
+		.layer_sel_id = 2,
+		.supported_rotations = DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 8,
+		.max_downscale_factor = 8,
+		.dly = { 20, 47, 41 },
+	}, {
+		.name = "Cluster0-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER0,
+		.base = 0x1000,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 0,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	}, {
+		.name = "Cluster1-win0",
+		.phys_id = ROCKCHIP_VOP2_CLUSTER1,
+		.base = 0x1200,
+		.formats = formats_win_full_10bit,
+		.nformats = ARRAY_SIZE(formats_win_full_10bit),
+		.format_modifiers = format_modifiers_afbc,
+		.layer_sel_id = 1,
+		.supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
+					DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
+		.type = DRM_PLANE_TYPE_OVERLAY,
+		.max_upscale_factor = 4,
+		.max_downscale_factor = 4,
+		.dly = { 0, 27, 21 },
+		.feature = WIN_FEATURE_AFBDC | WIN_FEATURE_CLUSTER,
+	},
+};
+
+static const struct vop2_data rk3566_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3566,
+};
+
+static const struct vop2_data rk3568_vop = {
+	.nr_vps = 3,
+	.nr_mixers = 5,
+	.nr_gammas = 1,
+	.max_input = { 4096, 2304 },
+	.max_output = { 4096, 2304 },
+	.vp = rk3568_vop_video_ports,
+	.win = rk3568_vop_win_data,
+	.win_size = ARRAY_SIZE(rk3568_vop_win_data),
+	.soc_id = 3568,
+};
+
+static const struct of_device_id vop2_dt_match[] = {
+	{
+		.compatible = "rockchip,rk3566-vop",
+		.data = &rk3566_vop,
+	}, {
+		.compatible = "rockchip,rk3568-vop",
+		.data = &rk3568_vop,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, vop2_dt_match);
+
+static int vop2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return component_add(dev, &vop2_component_ops);
+}
+
+static int vop2_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &vop2_component_ops);
+
+	return 0;
+}
+
+struct platform_driver vop2_platform_driver = {
+	.probe = vop2_probe,
+	.remove = vop2_remove,
+	.driver = {
+		.name = "rockchip-vop2",
+		.of_match_table = of_match_ptr(vop2_dt_match),
+	},
+};
-- 
2.30.2

Aw: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Frank Wunderlich]

Hi Sascha

tested full series on Bananapi r2 Pro V0 prototype (rk3568)

4K@60Hz
1080p@60Hz

both look good

Tested-By: Frank Wunderlich <frank-w@public-files.de>

regards Frank

Aw: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Frank Wunderlich]

Hi Sascha

tested full series on Bananapi r2 Pro V0 prototype (rk3568)

4K@60Hz
1080p@60Hz

both look good

Tested-By: Frank Wunderlich <frank-w@public-files.de>

regards Frank

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Aw: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Frank Wunderlich]

Hi Sascha

tested full series on Bananapi r2 Pro V0 prototype (rk3568)

4K@60Hz
1080p@60Hz

both look good

Tested-By: Frank Wunderlich <frank-w@public-files.de>

regards Frank

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Aw: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Frank Wunderlich]

Hi Sascha

tested full series on Bananapi r2 Pro V0 prototype (rk3568)

4K@60Hz
1080p@60Hz

both look good

Tested-By: Frank Wunderlich <frank-w@public-files.de>

regards Frank

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

Sascha,

FYI 
small report regarding 4k modes support in v4:

-on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
-on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

I would suggest split v4 into 2 separated series:

-VOP2 support
-HDMI 4k modes support

BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?

[1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

br


> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 26.01.2022, o godz. 15:55:
> 
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
> It replaces the VOP unit found in the older Rockchip SoCs.
> 
> This driver has been derived from the downstream Rockchip Kernel and
> heavily modified:
> 
> - All nonstandard DRM properties have been removed
> - dropped struct vop2_plane_state and pass around less data between
>  functions
> - Dropped all DRM_FORMAT_* not known on upstream
> - rework register access to get rid of excessively used macros
> - Drop all waiting for framesyncs
> 
> The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
> board. Overlay support is tested with the modetest utility. AFBC support
> on the cluster windows is tested with weston-simple-dmabuf-egl on
> weston using the (yet to be upstreamed) panfrost driver support.
> 
> Changes since v3:
> - Sort includes
> - fix typos
> - Drop spinlock
> - Use regmap_set_bits()/regmap_clear_bits()
> - simplify vop2_scale_factor()
> - simplify vop2_afbc_transform_offset()
> 

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

Sascha,

FYI 
small report regarding 4k modes support in v4:

-on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
-on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

I would suggest split v4 into 2 separated series:

-VOP2 support
-HDMI 4k modes support

BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?

[1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

br


> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 26.01.2022, o godz. 15:55:
> 
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
> It replaces the VOP unit found in the older Rockchip SoCs.
> 
> This driver has been derived from the downstream Rockchip Kernel and
> heavily modified:
> 
> - All nonstandard DRM properties have been removed
> - dropped struct vop2_plane_state and pass around less data between
>  functions
> - Dropped all DRM_FORMAT_* not known on upstream
> - rework register access to get rid of excessively used macros
> - Drop all waiting for framesyncs
> 
> The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
> board. Overlay support is tested with the modetest utility. AFBC support
> on the cluster windows is tested with weston-simple-dmabuf-egl on
> weston using the (yet to be upstreamed) panfrost driver support.
> 
> Changes since v3:
> - Sort includes
> - fix typos
> - Drop spinlock
> - Use regmap_set_bits()/regmap_clear_bits()
> - simplify vop2_scale_factor()
> - simplify vop2_afbc_transform_offset()
> 

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

Sascha,

FYI 
small report regarding 4k modes support in v4:

-on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
-on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

I would suggest split v4 into 2 separated series:

-VOP2 support
-HDMI 4k modes support

BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?

[1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

br


> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 26.01.2022, o godz. 15:55:
> 
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
> It replaces the VOP unit found in the older Rockchip SoCs.
> 
> This driver has been derived from the downstream Rockchip Kernel and
> heavily modified:
> 
> - All nonstandard DRM properties have been removed
> - dropped struct vop2_plane_state and pass around less data between
>  functions
> - Dropped all DRM_FORMAT_* not known on upstream
> - rework register access to get rid of excessively used macros
> - Drop all waiting for framesyncs
> 
> The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
> board. Overlay support is tested with the modetest utility. AFBC support
> on the cluster windows is tested with weston-simple-dmabuf-egl on
> weston using the (yet to be upstreamed) panfrost driver support.
> 
> Changes since v3:
> - Sort includes
> - fix typos
> - Drop spinlock
> - Use regmap_set_bits()/regmap_clear_bits()
> - simplify vop2_scale_factor()
> - simplify vop2_afbc_transform_offset()
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

Sascha,

FYI 
small report regarding 4k modes support in v4:

-on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
-on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

I would suggest split v4 into 2 separated series:

-VOP2 support
-HDMI 4k modes support

BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?

[1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

br


> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 26.01.2022, o godz. 15:55:
> 
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
> It replaces the VOP unit found in the older Rockchip SoCs.
> 
> This driver has been derived from the downstream Rockchip Kernel and
> heavily modified:
> 
> - All nonstandard DRM properties have been removed
> - dropped struct vop2_plane_state and pass around less data between
>  functions
> - Dropped all DRM_FORMAT_* not known on upstream
> - rework register access to get rid of excessively used macros
> - Drop all waiting for framesyncs
> 
> The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
> board. Overlay support is tested with the modetest utility. AFBC support
> on the cluster windows is tested with weston-simple-dmabuf-egl on
> weston using the (yet to be upstreamed) panfrost driver support.
> 
> Changes since v3:
> - Sort includes
> - fix typos
> - Drop spinlock
> - Use regmap_set_bits()/regmap_clear_bits()
> - simplify vop2_scale_factor()
> - simplify vop2_afbc_transform_offset()
> 


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

On Thu, Jan 27, 2022 at 10:17:13AM +0100, Piotr Oniszczuk wrote:
> Sascha,
> 
> FYI 
> small report regarding 4k modes support in v4:
> 
> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
well here.

> 
> I would suggest split v4 into 2 separated series:

Yeah, splitting up the series makes sense. At the moment I have it all
in one series to ease others testing it.

Sascha

> 
> -VOP2 support
> -HDMI 4k modes support
> 
> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
> 
> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

At least there are patches in it that I have in my series as well and
keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
always"

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

On Thu, Jan 27, 2022 at 10:17:13AM +0100, Piotr Oniszczuk wrote:
> Sascha,
> 
> FYI 
> small report regarding 4k modes support in v4:
> 
> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
well here.

> 
> I would suggest split v4 into 2 separated series:

Yeah, splitting up the series makes sense. At the moment I have it all
in one series to ease others testing it.

Sascha

> 
> -VOP2 support
> -HDMI 4k modes support
> 
> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
> 
> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

At least there are patches in it that I have in my series as well and
keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
always"

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

On Thu, Jan 27, 2022 at 10:17:13AM +0100, Piotr Oniszczuk wrote:
> Sascha,
> 
> FYI 
> small report regarding 4k modes support in v4:
> 
> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
well here.

> 
> I would suggest split v4 into 2 separated series:

Yeah, splitting up the series makes sense. At the moment I have it all
in one series to ease others testing it.

Sascha

> 
> -VOP2 support
> -HDMI 4k modes support
> 
> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
> 
> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

At least there are patches in it that I have in my series as well and
keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
always"

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Sascha Hauer]

On Thu, Jan 27, 2022 at 10:17:13AM +0100, Piotr Oniszczuk wrote:
> Sascha,
> 
> FYI 
> small report regarding 4k modes support in v4:
> 
> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....

Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
well here.

> 
> I would suggest split v4 into 2 separated series:

Yeah, splitting up the series makes sense. At the moment I have it all
in one series to ease others testing it.

Sascha

> 
> -VOP2 support
> -HDMI 4k modes support
> 
> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
> 
> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch

At least there are patches in it that I have in my series as well and
keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
always"

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 27.01.2022, o godz. 12:00:
> 
>> 
>> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
>> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....
> 
> Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
> 4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
> well here.

It was 4k@30
Indeed - firmware of my samsung is total crap in UI aspects - so maybe in hdmi modes are as well :-p
Anyway - this crap monitor works ok with 4k@30 on AW/RPI4/rk3399/n3450/MacBookPro

>> 
>> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
>> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
>> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
>> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
>> 
>> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch
> 
> At least there are patches in it that I have in my series as well and
> keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
> auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
> always"
> 

What was time-consuming for me was finding working patches combination which not breaks Qt DRM Atomic commits.
Many series floating arround various git repos/projects were offering 4k modes but breaking Qt in the same time....

btw: have you plans to look/address non-working DRM planes in VOP2?
Rendering to DRM plane gives me green screen on rk3566.
The same code (and binaries) are working ok on rk3399 (and other SoCs).
 
 

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 27.01.2022, o godz. 12:00:
> 
>> 
>> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
>> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....
> 
> Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
> 4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
> well here.

It was 4k@30
Indeed - firmware of my samsung is total crap in UI aspects - so maybe in hdmi modes are as well :-p
Anyway - this crap monitor works ok with 4k@30 on AW/RPI4/rk3399/n3450/MacBookPro

>> 
>> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
>> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
>> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
>> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
>> 
>> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch
> 
> At least there are patches in it that I have in my series as well and
> keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
> auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
> always"
> 

What was time-consuming for me was finding working patches combination which not breaks Qt DRM Atomic commits.
Many series floating arround various git repos/projects were offering 4k modes but breaking Qt in the same time....

btw: have you plans to look/address non-working DRM planes in VOP2?
Rendering to DRM plane gives me green screen on rk3566.
The same code (and binaries) are working ok on rk3399 (and other SoCs).
 
 

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 27.01.2022, o godz. 12:00:
> 
>> 
>> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
>> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....
> 
> Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
> 4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
> well here.

It was 4k@30
Indeed - firmware of my samsung is total crap in UI aspects - so maybe in hdmi modes are as well :-p
Anyway - this crap monitor works ok with 4k@30 on AW/RPI4/rk3399/n3450/MacBookPro

>> 
>> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
>> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
>> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
>> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
>> 
>> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch
> 
> At least there are patches in it that I have in my series as well and
> keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
> auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
> always"
> 

What was time-consuming for me was finding working patches combination which not breaks Qt DRM Atomic commits.
Many series floating arround various git repos/projects were offering 4k modes but breaking Qt in the same time....

btw: have you plans to look/address non-working DRM planes in VOP2?
Rendering to DRM plane gives me green screen on rk3566.
The same code (and binaries) are working ok on rk3399 (and other SoCs).
 
 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[Piotr Oniszczuk]

> Wiadomość napisana przez Sascha Hauer <s.hauer@pengutronix.de> w dniu 27.01.2022, o godz. 12:00:
> 
>> 
>> -on rk3399 it gives me 4k screen where right vertical 1/3 part of screen is garbage
>> -on rk3566 my samsung 4k monitor has black screen and cycle of OSD msgs: HDMI2 connected; HDMI2 disconnected; ....
> 
> Same here on my rk3568, also with a samsung monitor. Was it 4k@60Hz or
> 4k@30Hz? If the former, could you give 4k@30Hz a try? That mode works
> well here.

It was 4k@30
Indeed - firmware of my samsung is total crap in UI aspects - so maybe in hdmi modes are as well :-p
Anyway - this crap monitor works ok with 4k@30 on AW/RPI4/rk3399/n3450/MacBookPro

>> 
>> BTW: getting well working 4k HDMI modes on rk3399 was real story for me.
>> There is many different series of patches to address this - but all have some subtle issues for me (i.e. 4k HDMI modes works but i.e. Qt is failing with DRM atomic commits in EGLFS)
>> I developed well working [1] giving me reliable 4k on rk3399 (including working Qt DRM drawing in EGLFS mode) 
>> Maybe it will be somehow helpful to get 4k modes solution for rk3566 _and_ rk3399 (on single kernel binary)?
>> 
>> [1] https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-5.16/files/0730-drm-rockchip-add-4k-videomodes-support.patch
> 
> At least there are patches in it that I have in my series as well and
> keep popping up everywhere like "drm/rockchip: dw_hdmi: Use
> auto-generated tables" and "drm/rockchip: dw_hdmi: Set cur_ctr to 0
> always"
> 

What was time-consuming for me was finding working patches combination which not breaks Qt DRM Atomic commits.
Many series floating arround various git repos/projects were offering 4k modes but breaking Qt in the same time....

btw: have you plans to look/address non-working DRM planes in VOP2?
Rendering to DRM plane gives me green screen on rk3566.
The same code (and binaries) are working ok on rk3399 (and other SoCs).
 
 
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: MiPi DSI interface for RK3566 ?

[Sascha Hauer]

Hi Philip,

On Fri, Jan 28, 2022 at 12:33:39AM +0000, subs wrote:
> Hello Sascha
> 
> Please excuse me for reaching out unsolicited.
> 
> I have a project for which I want to use the DSI interface for the Pine
> Quartz64 and other RK3566 boards.
> 
> The problem is that the DSI interface (unless I am mistaken) is only
> supported with the BSP kernels.  As functionality of mainline kernels is now
> approaching that of the BSP kernels and is clearly the future for this SoC
> this leaves those of us who want to use LCD panels left a bit out on a limb.
> Other developers are telling me to forget about the BSP kernels but if one
> wants to use an LCD panel that isn't so easy.
> 
> I am not a kernel developer and so I only have three choices, wait, put
> significant effort into working around the BSP kernel, or give up and target
> another SoC.
> 
> Are you able to give any indication whether you know if anyone is working on
> DSI support in mainline and if something is coming any time soon? so that I
> can plan my project accordingly?

I have MIPI DSI working based on these VOP2 patches. MIPI DSI is
currently out of scope for us, I only worked on it up to the point where
it works for me on the RK3568 EVB board to be able to test the VOP2 driver.

You can get the patches here:

https://git.pengutronix.de/cgit/sha/linux/log/?h=rockchip-vop2-mipi

The patches are not in a mainline suitable shape, but could well serve
as a starting point.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 27/27] drm: rockchip: Add VOP2 driver

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 7355 bytes --]

Hi Sascha,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on drm/drm-next]
[also build test WARNING on drm-tip/drm-tip drm-exynos/exynos-drm-next tegra-drm/drm/tegra/for-next v5.17-rc1]
[cannot apply to rockchip/for-next drm-intel/for-linux-next airlied/drm-next next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Sascha-Hauer/drm-rockchip-RK356x-VOP2-support/20220126-225854
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: openrisc-allmodconfig (https://download.01.org/0day-ci/archive/20220129/202201291832.8LdxrySt-lkp(a)intel.com/config)
compiler: or1k-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/08336907e22eeb28385d746fc74e6f3850c9c838
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Sascha-Hauer/drm-rockchip-RK356x-VOP2-support/20220126-225854
        git checkout 08336907e22eeb28385d746fc74e6f3850c9c838
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=openrisc SHELL=/bin/bash drivers/gpu/drm/rockchip/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c: In function 'vop2_cluster_init':
>> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2423:1: warning: the frame size of 1100 bytes is larger than 1024 bytes [-Wframe-larger-than=]
    2423 | };
         | ^
   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c: In function 'vop2_esmart_init':
   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2495:1: warning: the frame size of 1100 bytes is larger than 1024 bytes [-Wframe-larger-than=]
    2495 | };
         | ^


vim +2423 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c

  2348	
  2349	static int vop2_cluster_init(struct vop2_win *win)
  2350	{
  2351		struct vop2 *vop2 = win->vop2;
  2352		int i;
  2353		struct reg_field vop2_cluster_regs[VOP2_WIN_MAX_REG] = {
  2354			[VOP2_WIN_ENABLE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 0, 0),
  2355			[VOP2_WIN_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 1, 5),
  2356			[VOP2_WIN_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 14, 14),
  2357			[VOP2_WIN_DITHER_UP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 18, 18),
  2358			[VOP2_WIN_ACT_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_ACT_INFO, 0, 31),
  2359			[VOP2_WIN_DSP_INFO] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_INFO, 0, 31),
  2360			[VOP2_WIN_DSP_ST] = REG_FIELD(RK3568_CLUSTER_WIN_DSP_ST, 0, 31),
  2361			[VOP2_WIN_YRGB_MST] = REG_FIELD(RK3568_CLUSTER_WIN_YRGB_MST, 0, 31),
  2362			[VOP2_WIN_UV_MST] = REG_FIELD(RK3568_CLUSTER_WIN_CBR_MST, 0, 31),
  2363			[VOP2_WIN_YUV_CLIP] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 19, 19),
  2364			[VOP2_WIN_YRGB_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 0, 15),
  2365			[VOP2_WIN_UV_VIR] = REG_FIELD(RK3568_CLUSTER_WIN_VIR, 16, 31),
  2366			[VOP2_WIN_Y2R_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 8, 8),
  2367			[VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 9, 9),
  2368			[VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 10, 11),
  2369	
  2370			/* Scale */
  2371			[VOP2_WIN_SCALE_YRGB_X] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 0, 15),
  2372			[VOP2_WIN_SCALE_YRGB_Y] = REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 16, 31),
  2373			[VOP2_WIN_YRGB_VER_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 14, 15),
  2374			[VOP2_WIN_YRGB_HOR_SCL_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 12, 13),
  2375			[VOP2_WIN_BIC_COE_SEL] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 2, 3),
  2376			[VOP2_WIN_VSD_YRGB_GT2] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 28, 28),
  2377			[VOP2_WIN_VSD_YRGB_GT4] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL1, 29, 29),
  2378	
  2379			/* cluster regs */
  2380			[VOP2_WIN_AFBC_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 1, 1),
  2381			[VOP2_WIN_CLUSTER_ENABLE] = REG_FIELD(RK3568_CLUSTER_CTRL, 0, 0),
  2382			[VOP2_WIN_CLUSTER_LB_MODE] = REG_FIELD(RK3568_CLUSTER_CTRL, 4, 7),
  2383	
  2384			/* afbc regs */
  2385			[VOP2_WIN_AFBC_FORMAT] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 2, 6),
  2386			[VOP2_WIN_AFBC_RB_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 9, 9),
  2387			[VOP2_WIN_AFBC_UV_SWAP] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 10, 10),
  2388			[VOP2_WIN_AFBC_AUTO_GATING_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_OUTPUT_CTRL, 4, 4),
  2389			[VOP2_WIN_AFBC_HALF_BLOCK_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 7, 7),
  2390			[VOP2_WIN_AFBC_BLOCK_SPLIT_EN] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_CTRL, 8, 8),
  2391			[VOP2_WIN_AFBC_HDR_PTR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_HDR_PTR, 0, 31),
  2392			[VOP2_WIN_AFBC_PIC_SIZE] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_SIZE, 0, 31),
  2393			[VOP2_WIN_AFBC_PIC_VIR_WIDTH] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 0, 15),
  2394			[VOP2_WIN_AFBC_TILE_NUM] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_VIR_WIDTH, 16, 31),
  2395			[VOP2_WIN_AFBC_PIC_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_PIC_OFFSET, 0, 31),
  2396			[VOP2_WIN_AFBC_DSP_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_DSP_OFFSET, 0, 31),
  2397			[VOP2_WIN_AFBC_TRANSFORM_OFFSET] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_TRANSFORM_OFFSET, 0, 31),
  2398			[VOP2_WIN_AFBC_ROTATE_90] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 0, 0),
  2399			[VOP2_WIN_AFBC_ROTATE_270] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 1, 1),
  2400			[VOP2_WIN_XMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 2, 2),
  2401			[VOP2_WIN_YMIRROR] = REG_FIELD(RK3568_CLUSTER_WIN_AFBCD_ROTATE_MODE, 3, 3),
  2402			[VOP2_WIN_UV_SWAP] = { .reg = 0xffffffff },
  2403			[VOP2_WIN_COLOR_KEY] = { .reg = 0xffffffff },
  2404			[VOP2_WIN_COLOR_KEY_EN] = { .reg = 0xffffffff },
  2405			[VOP2_WIN_SCALE_CBCR_X] = { .reg = 0xffffffff },
  2406			[VOP2_WIN_SCALE_CBCR_Y] = { .reg = 0xffffffff },
  2407			[VOP2_WIN_YRGB_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
  2408			[VOP2_WIN_YRGB_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
  2409			[VOP2_WIN_CBCR_VER_SCL_MODE] = { .reg = 0xffffffff },
  2410			[VOP2_WIN_CBCR_HSCL_FILTER_MODE] = { .reg = 0xffffffff },
  2411			[VOP2_WIN_CBCR_HOR_SCL_MODE] = { .reg = 0xffffffff },
  2412			[VOP2_WIN_CBCR_VSCL_FILTER_MODE] = { .reg = 0xffffffff },
  2413			[VOP2_WIN_VSD_CBCR_GT2] = { .reg = 0xffffffff },
  2414			[VOP2_WIN_VSD_CBCR_GT4] = { .reg = 0xffffffff },
  2415		};
  2416	
  2417		for (i = 0; i < ARRAY_SIZE(vop2_cluster_regs); i++)
  2418			vop2_cluster_regs[i].reg += win->offset;
  2419	
  2420		return devm_regmap_field_bulk_alloc(vop2->dev, vop2->map, win->reg,
  2421						    vop2_cluster_regs,
  2422						    ARRAY_SIZE(vop2_cluster_regs));
> 2423	};
  2424	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

Re: [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Michael Riesch]

Hello Sascha,

On 1/26/22 15:55, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.

The cable might be the issue indeed, at least in my tests 4k@60Hz worked
just fine. On a RK3568 EVB1, using

$ modetest -M rockchip -s 69:{1920x1080,3840x2160}-{30,60}

and a HP 27f 4K monitor:

Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks for your work and best regards,
Michael

> 
> Sascha
> 
> Changes since v3:
> - added changelog to each patch
> - Add 4k support to hdmi driver
> - rebase on v5.17-rc1
> 
> Changes since v2:
> - Add pin names to HDMI supply pin description
> - Add hclk support to HDMI driver
> - Dual license rockchip-vop2 binding, update binding
> - Add HDMI connector to board dts files
> - drop unnecessary gamma_lut registers from vop2
> - Update dclk_vop[012] clock handling, no longer hacks needed
> - Complete regmap conversion
> 
> Changes since v1:
> - drop all unnecessary waiting for frames within atomic modeset and plane update
> - Cluster subwin support removed
> - gamma support removed
> - unnecessary irq_lock removed
> - interrupt handling simplified
> - simplified zpos handling
> - drop is_alpha_support(), use fb->format->has_alpha instead
> - use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
> - Use fixed number of planes per video port
> - Drop homegrown regmap code from vop2 driver (not complete yet)
> - Add separate include file for vop2 driver to not pollute the vop include
> 
> Andy Yan (1):
>   drm: rockchip: Add VOP2 driver
> 
> Benjamin Gaignard (1):
>   dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
>     HDMI
> 
> Douglas Anderson (2):
>   drm/rockchip: dw_hdmi: Use auto-generated tables
>   drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
> 
> Michael Riesch (1):
>   arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
> 
> Nickey Yang (1):
>   drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz
> 
> Sascha Hauer (21):
>   drm/encoder: Add of_graph port to struct drm_encoder
>   drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
>   drm/rockchip: dw_hdmi: rename vpll clock to reference clock
>   drm/rockchip: dw_hdmi: add rk3568 support
>   drm/rockchip: dw_hdmi: add regulator support
>   drm/rockchip: dw_hdmi: Add support for hclk
>   drm/rockchip: dw_hdmi: drop mode_valid hook
>   clk: rockchip: rk3568: Add more PLL rates
>   dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
>   dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
>   dt-bindings: display: rockchip: dw-hdmi: Add regulator support
>   dt-bindings: display: rockchip: dw-hdmi: Add additional clock
>   dt-bindings: display: rockchip: Add binding for VOP2
>   arm64: dts: rockchip: rk3399: reorder hmdi clocks
>   arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
>   arm64: dts: rockchip: rk356x: Add VOP2 nodes
>   arm64: dts: rockchip: rk356x: Add HDMI nodes
>   arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
>   clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
>   clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
>   drm/rockchip: Make VOP driver optional
> 
>  .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
>  .../display/rockchip/rockchip-vop2.yaml       |  146 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
>  .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
>  drivers/clk/rockchip/clk-rk3568.c             |   14 +-
>  drivers/gpu/drm/rockchip/Kconfig              |   14 +
>  drivers/gpu/drm/rockchip/Makefile             |    4 +-
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
>  include/drm/drm_encoder.h                     |    2 +
>  include/dt-bindings/soc/rockchip,vop2.h       |   14 +
>  21 files changed, 4039 insertions(+), 130 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Re: [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Michael Riesch]

Hello Sascha,

On 1/26/22 15:55, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.

The cable might be the issue indeed, at least in my tests 4k@60Hz worked
just fine. On a RK3568 EVB1, using

$ modetest -M rockchip -s 69:{1920x1080,3840x2160}-{30,60}

and a HP 27f 4K monitor:

Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks for your work and best regards,
Michael

> 
> Sascha
> 
> Changes since v3:
> - added changelog to each patch
> - Add 4k support to hdmi driver
> - rebase on v5.17-rc1
> 
> Changes since v2:
> - Add pin names to HDMI supply pin description
> - Add hclk support to HDMI driver
> - Dual license rockchip-vop2 binding, update binding
> - Add HDMI connector to board dts files
> - drop unnecessary gamma_lut registers from vop2
> - Update dclk_vop[012] clock handling, no longer hacks needed
> - Complete regmap conversion
> 
> Changes since v1:
> - drop all unnecessary waiting for frames within atomic modeset and plane update
> - Cluster subwin support removed
> - gamma support removed
> - unnecessary irq_lock removed
> - interrupt handling simplified
> - simplified zpos handling
> - drop is_alpha_support(), use fb->format->has_alpha instead
> - use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
> - Use fixed number of planes per video port
> - Drop homegrown regmap code from vop2 driver (not complete yet)
> - Add separate include file for vop2 driver to not pollute the vop include
> 
> Andy Yan (1):
>   drm: rockchip: Add VOP2 driver
> 
> Benjamin Gaignard (1):
>   dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
>     HDMI
> 
> Douglas Anderson (2):
>   drm/rockchip: dw_hdmi: Use auto-generated tables
>   drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
> 
> Michael Riesch (1):
>   arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
> 
> Nickey Yang (1):
>   drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz
> 
> Sascha Hauer (21):
>   drm/encoder: Add of_graph port to struct drm_encoder
>   drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
>   drm/rockchip: dw_hdmi: rename vpll clock to reference clock
>   drm/rockchip: dw_hdmi: add rk3568 support
>   drm/rockchip: dw_hdmi: add regulator support
>   drm/rockchip: dw_hdmi: Add support for hclk
>   drm/rockchip: dw_hdmi: drop mode_valid hook
>   clk: rockchip: rk3568: Add more PLL rates
>   dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
>   dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
>   dt-bindings: display: rockchip: dw-hdmi: Add regulator support
>   dt-bindings: display: rockchip: dw-hdmi: Add additional clock
>   dt-bindings: display: rockchip: Add binding for VOP2
>   arm64: dts: rockchip: rk3399: reorder hmdi clocks
>   arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
>   arm64: dts: rockchip: rk356x: Add VOP2 nodes
>   arm64: dts: rockchip: rk356x: Add HDMI nodes
>   arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
>   clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
>   clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
>   drm/rockchip: Make VOP driver optional
> 
>  .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
>  .../display/rockchip/rockchip-vop2.yaml       |  146 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
>  .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
>  drivers/clk/rockchip/clk-rk3568.c             |   14 +-
>  drivers/gpu/drm/rockchip/Kconfig              |   14 +
>  drivers/gpu/drm/rockchip/Makefile             |    4 +-
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
>  include/drm/drm_encoder.h                     |    2 +
>  include/dt-bindings/soc/rockchip,vop2.h       |   14 +
>  21 files changed, 4039 insertions(+), 130 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Michael Riesch]

Hello Sascha,

On 1/26/22 15:55, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.

The cable might be the issue indeed, at least in my tests 4k@60Hz worked
just fine. On a RK3568 EVB1, using

$ modetest -M rockchip -s 69:{1920x1080,3840x2160}-{30,60}

and a HP 27f 4K monitor:

Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks for your work and best regards,
Michael

> 
> Sascha
> 
> Changes since v3:
> - added changelog to each patch
> - Add 4k support to hdmi driver
> - rebase on v5.17-rc1
> 
> Changes since v2:
> - Add pin names to HDMI supply pin description
> - Add hclk support to HDMI driver
> - Dual license rockchip-vop2 binding, update binding
> - Add HDMI connector to board dts files
> - drop unnecessary gamma_lut registers from vop2
> - Update dclk_vop[012] clock handling, no longer hacks needed
> - Complete regmap conversion
> 
> Changes since v1:
> - drop all unnecessary waiting for frames within atomic modeset and plane update
> - Cluster subwin support removed
> - gamma support removed
> - unnecessary irq_lock removed
> - interrupt handling simplified
> - simplified zpos handling
> - drop is_alpha_support(), use fb->format->has_alpha instead
> - use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
> - Use fixed number of planes per video port
> - Drop homegrown regmap code from vop2 driver (not complete yet)
> - Add separate include file for vop2 driver to not pollute the vop include
> 
> Andy Yan (1):
>   drm: rockchip: Add VOP2 driver
> 
> Benjamin Gaignard (1):
>   dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
>     HDMI
> 
> Douglas Anderson (2):
>   drm/rockchip: dw_hdmi: Use auto-generated tables
>   drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
> 
> Michael Riesch (1):
>   arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
> 
> Nickey Yang (1):
>   drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz
> 
> Sascha Hauer (21):
>   drm/encoder: Add of_graph port to struct drm_encoder
>   drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
>   drm/rockchip: dw_hdmi: rename vpll clock to reference clock
>   drm/rockchip: dw_hdmi: add rk3568 support
>   drm/rockchip: dw_hdmi: add regulator support
>   drm/rockchip: dw_hdmi: Add support for hclk
>   drm/rockchip: dw_hdmi: drop mode_valid hook
>   clk: rockchip: rk3568: Add more PLL rates
>   dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
>   dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
>   dt-bindings: display: rockchip: dw-hdmi: Add regulator support
>   dt-bindings: display: rockchip: dw-hdmi: Add additional clock
>   dt-bindings: display: rockchip: Add binding for VOP2
>   arm64: dts: rockchip: rk3399: reorder hmdi clocks
>   arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
>   arm64: dts: rockchip: rk356x: Add VOP2 nodes
>   arm64: dts: rockchip: rk356x: Add HDMI nodes
>   arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
>   clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
>   clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
>   drm/rockchip: Make VOP driver optional
> 
>  .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
>  .../display/rockchip/rockchip-vop2.yaml       |  146 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
>  .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
>  drivers/clk/rockchip/clk-rk3568.c             |   14 +-
>  drivers/gpu/drm/rockchip/Kconfig              |   14 +
>  drivers/gpu/drm/rockchip/Makefile             |    4 +-
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
>  include/drm/drm_encoder.h                     |    2 +
>  include/dt-bindings/soc/rockchip,vop2.h       |   14 +
>  21 files changed, 4039 insertions(+), 130 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Michael Riesch]

Hello Sascha,

On 1/26/22 15:55, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.

The cable might be the issue indeed, at least in my tests 4k@60Hz worked
just fine. On a RK3568 EVB1, using

$ modetest -M rockchip -s 69:{1920x1080,3840x2160}-{30,60}

and a HP 27f 4K monitor:

Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks for your work and best regards,
Michael

> 
> Sascha
> 
> Changes since v3:
> - added changelog to each patch
> - Add 4k support to hdmi driver
> - rebase on v5.17-rc1
> 
> Changes since v2:
> - Add pin names to HDMI supply pin description
> - Add hclk support to HDMI driver
> - Dual license rockchip-vop2 binding, update binding
> - Add HDMI connector to board dts files
> - drop unnecessary gamma_lut registers from vop2
> - Update dclk_vop[012] clock handling, no longer hacks needed
> - Complete regmap conversion
> 
> Changes since v1:
> - drop all unnecessary waiting for frames within atomic modeset and plane update
> - Cluster subwin support removed
> - gamma support removed
> - unnecessary irq_lock removed
> - interrupt handling simplified
> - simplified zpos handling
> - drop is_alpha_support(), use fb->format->has_alpha instead
> - use devm_regulator_get() rather than devm_regulator_get_optional() for hdmi regulators
> - Use fixed number of planes per video port
> - Drop homegrown regmap code from vop2 driver (not complete yet)
> - Add separate include file for vop2 driver to not pollute the vop include
> 
> Andy Yan (1):
>   drm: rockchip: Add VOP2 driver
> 
> Benjamin Gaignard (1):
>   dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568
>     HDMI
> 
> Douglas Anderson (2):
>   drm/rockchip: dw_hdmi: Use auto-generated tables
>   drm/rockchip: dw_hdmi: Set cur_ctr to 0 always
> 
> Michael Riesch (1):
>   arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a
> 
> Nickey Yang (1):
>   drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz
> 
> Sascha Hauer (21):
>   drm/encoder: Add of_graph port to struct drm_encoder
>   drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
>   drm/rockchip: dw_hdmi: rename vpll clock to reference clock
>   drm/rockchip: dw_hdmi: add rk3568 support
>   drm/rockchip: dw_hdmi: add regulator support
>   drm/rockchip: dw_hdmi: Add support for hclk
>   drm/rockchip: dw_hdmi: drop mode_valid hook
>   clk: rockchip: rk3568: Add more PLL rates
>   dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional
>   dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name
>   dt-bindings: display: rockchip: dw-hdmi: Add regulator support
>   dt-bindings: display: rockchip: dw-hdmi: Add additional clock
>   dt-bindings: display: rockchip: Add binding for VOP2
>   arm64: dts: rockchip: rk3399: reorder hmdi clocks
>   arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref'
>   arm64: dts: rockchip: rk356x: Add VOP2 nodes
>   arm64: dts: rockchip: rk356x: Add HDMI nodes
>   arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
>   clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
>   clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
>   drm/rockchip: Make VOP driver optional
> 
>  .../display/rockchip/rockchip,dw-hdmi.yaml    |   29 +-
>  .../display/rockchip/rockchip-vop2.yaml       |  146 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |    6 +-
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |   48 +
>  arch/arm64/boot/dts/rockchip/rk3566.dtsi      |    4 +
>  .../boot/dts/rockchip/rk3568-evb1-v10.dts     |   48 +
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |    4 +
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   86 +
>  drivers/clk/rockchip/clk-rk3568.c             |   14 +-
>  drivers/gpu/drm/rockchip/Kconfig              |   14 +
>  drivers/gpu/drm/rockchip/Makefile             |    4 +-
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  293 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    3 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    7 +-
>  drivers/gpu/drm/rockchip/rockchip_drm_fb.c    |    2 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |   15 +
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.c  | 2665 +++++++++++++++++
>  drivers/gpu/drm/rockchip/rockchip_drm_vop2.h  |  480 +++
>  drivers/gpu/drm/rockchip/rockchip_vop2_reg.c  |  285 ++
>  include/drm/drm_encoder.h                     |    2 +
>  include/dt-bindings/soc/rockchip,vop2.h       |   14 +
>  21 files changed, 4039 insertions(+), 130 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>  create mode 100644 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>  create mode 100644 include/dt-bindings/soc/rockchip,vop2.h
> 

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[11/27] clk: rockchip: rk3568: Add more PLL rates
        commit: 842f4cb7263953020f4e2f2f0005fc3e6fc56144
[24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
        commit: ff3187eabb5ce478d15b6ed62eb286756adefac3
[25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
        commit: 6e69052f01d9131388cfcfaee929120118a267f4

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[11/27] clk: rockchip: rk3568: Add more PLL rates
        commit: 842f4cb7263953020f4e2f2f0005fc3e6fc56144
[24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
        commit: ff3187eabb5ce478d15b6ed62eb286756adefac3
[25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
        commit: 6e69052f01d9131388cfcfaee929120118a267f4

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[11/27] clk: rockchip: rk3568: Add more PLL rates
        commit: 842f4cb7263953020f4e2f2f0005fc3e6fc56144
[24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
        commit: ff3187eabb5ce478d15b6ed62eb286756adefac3
[25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
        commit: 6e69052f01d9131388cfcfaee929120118a267f4

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[11/27] clk: rockchip: rk3568: Add more PLL rates
        commit: 842f4cb7263953020f4e2f2f0005fc3e6fc56144
[24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop*
        commit: ff3187eabb5ce478d15b6ed62eb286756adefac3
[25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock
        commit: 6e69052f01d9131388cfcfaee929120118a267f4

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks
        commit: 2e8a8b5955a000cc655f7e368670518cbb77fe58

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks
        commit: 2e8a8b5955a000cc655f7e368670518cbb77fe58

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks
        commit: 2e8a8b5955a000cc655f7e368670518cbb77fe58

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support

[Heiko Stuebner]

On Wed, 26 Jan 2022 15:55:22 +0100, Sascha Hauer wrote:
> This is v4 of adding RK356x VOP2 support. Due to popular demand I added
> a changelog to each patch, at least starting with changes to v3, I
> didn't care to add the older changes as well. I hopefully integrated all
> feedback I received to v3. Additionally I added some patches to the HDMI
> driver to support resolutions up to 4k@60Hz. The patches are mostly
> taken from the downstream kernel. Some have been send to public lists,
> but were never applied upstream for reasons I do not know. The patches
> are a bit more intrusive than needed for my case, but are present in the
> downstream kernel for a long time, so I decided just to take them
> instead of stripping them down to my needs. With these patches I
> successfully used the driver with 4k@30Hz. 4k@60Hz doesn't work for me,
> I hope this is due to my low quality cable.
> 
> [...]

Applied, thanks!

[18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks
        commit: 2e8a8b5955a000cc655f7e368670518cbb77fe58

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip