From: Richard Zhu <hongxing.zhu@nxp.com> To: l.stach@pengutronix.de, bhelgaas@google.com, lorenzo.pieralisi@arm.com, jingoohan1@gmail.com Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, Richard Zhu <hongxing.zhu@nxp.com> Subject: [PATCH v3 6/7] PCI: imx6: Fix the reference handling unbalance when link never came up Date: Fri, 22 Oct 2021 15:12:29 +0800 [thread overview] Message-ID: <1634886750-13861-7-git-send-email-hongxing.zhu@nxp.com> (raw) In-Reply-To: <1634886750-13861-1-git-send-email-hongxing.zhu@nxp.com> When link never came up, driver probe would be failed with error -110. To keep usage counter balance of the clocks, powers and so on. Add a new host_exit() callback for i.MX PCIe driver to handle this case in the error handling after host_init. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index b752a673e767..c723df053574 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -875,7 +875,6 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); - imx6_pcie_reset_phy(imx6_pcie); return ret; } @@ -899,8 +898,20 @@ static int imx6_pcie_host_init(struct pcie_port *pp) return 0; } +static void imx6_pcie_host_exit(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); + + imx6_pcie_reset_phy(imx6_pcie); + imx6_pcie_clk_disable(imx6_pcie); + if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) + regulator_disable(imx6_pcie->vpcie); +} + static const struct dw_pcie_host_ops imx6_pcie_host_ops = { .host_init = imx6_pcie_host_init, + .host_exit = imx6_pcie_host_exit, }; static const struct dw_pcie_ops dw_pcie_ops = { @@ -1180,12 +1191,8 @@ static int imx6_pcie_probe(struct platform_device *pdev) return ret; ret = dw_pcie_host_init(&pci->pp); - if (ret < 0) { - if (imx6_pcie->vpcie - && regulator_is_enabled(imx6_pcie->vpcie) > 0) - regulator_disable(imx6_pcie->vpcie); + if (ret < 0) return ret; - } if (pci_msi_enabled()) { u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com> To: l.stach@pengutronix.de, bhelgaas@google.com, lorenzo.pieralisi@arm.com, jingoohan1@gmail.com Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, Richard Zhu <hongxing.zhu@nxp.com> Subject: [PATCH v3 6/7] PCI: imx6: Fix the reference handling unbalance when link never came up Date: Fri, 22 Oct 2021 15:12:29 +0800 [thread overview] Message-ID: <1634886750-13861-7-git-send-email-hongxing.zhu@nxp.com> (raw) In-Reply-To: <1634886750-13861-1-git-send-email-hongxing.zhu@nxp.com> When link never came up, driver probe would be failed with error -110. To keep usage counter balance of the clocks, powers and so on. Add a new host_exit() callback for i.MX PCIe driver to handle this case in the error handling after host_init. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index b752a673e767..c723df053574 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -875,7 +875,6 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); - imx6_pcie_reset_phy(imx6_pcie); return ret; } @@ -899,8 +898,20 @@ static int imx6_pcie_host_init(struct pcie_port *pp) return 0; } +static void imx6_pcie_host_exit(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); + + imx6_pcie_reset_phy(imx6_pcie); + imx6_pcie_clk_disable(imx6_pcie); + if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) + regulator_disable(imx6_pcie->vpcie); +} + static const struct dw_pcie_host_ops imx6_pcie_host_ops = { .host_init = imx6_pcie_host_init, + .host_exit = imx6_pcie_host_exit, }; static const struct dw_pcie_ops dw_pcie_ops = { @@ -1180,12 +1191,8 @@ static int imx6_pcie_probe(struct platform_device *pdev) return ret; ret = dw_pcie_host_init(&pci->pp); - if (ret < 0) { - if (imx6_pcie->vpcie - && regulator_is_enabled(imx6_pcie->vpcie) > 0) - regulator_disable(imx6_pcie->vpcie); + if (ret < 0) return ret; - } if (pci_msi_enabled()) { u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-22 7:38 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-22 7:12 [PATCH v3 0/7] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-22 7:12 ` [PATCH v3 1/7] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-22 7:12 ` [PATCH v3 2/7] PCI: imx6: Add the error propagation from host_init Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-22 7:12 ` [PATCH v3 3/7] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-25 11:13 ` Francesco Dolcini 2021-10-25 11:13 ` Francesco Dolcini 2021-10-25 11:23 ` Mark Brown 2021-10-25 11:23 ` Mark Brown 2021-10-26 2:18 ` Richard Zhu 2021-10-26 2:18 ` Richard Zhu 2021-10-26 8:52 ` Francesco Dolcini 2021-10-26 8:52 ` Francesco Dolcini 2021-10-26 9:06 ` Richard Zhu 2021-10-26 9:06 ` Richard Zhu 2021-10-26 9:11 ` Francesco Dolcini 2021-10-26 9:11 ` Francesco Dolcini 2021-10-26 9:18 ` Richard Zhu 2021-10-26 9:18 ` Richard Zhu 2021-10-26 9:48 ` Francesco Dolcini 2021-10-26 9:48 ` Francesco Dolcini 2021-10-28 6:48 ` Richard Zhu 2021-10-28 6:48 ` Richard Zhu 2021-10-26 10:58 ` Mark Brown 2021-10-26 10:58 ` Mark Brown 2021-10-28 6:50 ` Richard Zhu 2021-10-28 6:50 ` Richard Zhu 2021-10-28 11:50 ` Mark Brown 2021-10-28 11:50 ` Mark Brown 2021-10-29 3:58 ` Richard Zhu 2021-10-29 3:58 ` Richard Zhu 2021-10-29 11:46 ` Mark Brown 2021-10-29 11:46 ` Mark Brown 2021-11-01 1:46 ` Richard Zhu 2021-11-01 1:46 ` Richard Zhu 2021-10-26 1:57 ` Richard Zhu 2021-10-26 1:57 ` Richard Zhu 2021-10-22 7:12 ` [PATCH v3 4/7] PCI: imx6: move the clock disable function to a proper place Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-22 7:12 ` [PATCH v3 5/7] PCI: dwc: add a new callback host exit function into host ops Richard Zhu 2021-10-22 7:12 ` Richard Zhu 2021-10-22 7:12 ` Richard Zhu [this message] 2021-10-22 7:12 ` [PATCH v3 6/7] PCI: imx6: Fix the reference handling unbalance when link never came up Richard Zhu 2021-10-22 7:12 ` [PATCH v3 7/7] PCI: imx6: Add the compliance tests mode support Richard Zhu 2021-10-22 7:12 ` Richard Zhu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1634886750-13861-7-git-send-email-hongxing.zhu@nxp.com \ --to=hongxing.zhu@nxp.com \ --cc=bhelgaas@google.com \ --cc=jingoohan1@gmail.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.