All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode
Date: Wed, 12 Jan 2022 16:18:08 +0100	[thread overview]
Message-ID: <20220112151814.24361-6-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>

If x1/x4 mode is not set correctly then link with endpoint card is not
established.

Use DTS property 'num-lanes' to deteriminate x1/x4 mode.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index a075ba26cff1..0f2ec0a17874 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -93,6 +93,7 @@ struct mvebu_pcie_port {
 	void __iomem *base;
 	u32 port;
 	u32 lane;
+	bool is_x4;
 	int devfn;
 	unsigned int mem_target;
 	unsigned int mem_attr;
@@ -233,13 +234,25 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u32 ctrl, cmd, dev_rev, mask;
+	u32 ctrl, lnkcap, cmd, dev_rev, mask;
 
 	/* Setup PCIe controller to Root Complex mode. */
 	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
 	ctrl |= PCIE_CTRL_RC_MODE;
 	mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
 
+	/*
+	 * Set Maximum Link Width to X1 or X4 in Root Port's PCIe Link
+	 * Capability register. This register is defined by PCIe specification
+	 * as read-only but this mvebu controller has it as read-write and must
+	 * be set to number of SerDes PCIe lanes (1 or 4). If this register is
+	 * not set correctly then link with endpoint card is not established.
+	 */
+	lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
+	lnkcap |= (port->is_x4 ? 4 : 1) << 4;
+	mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+
 	/* Disable Root Bridge I/O space, memory space and bus mastering. */
 	cmd = mvebu_readl(port, PCIE_CMD_OFF);
 	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
@@ -986,6 +999,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	struct device *dev = &pcie->pdev->dev;
 	enum of_gpio_flags flags;
 	int reset_gpio, ret;
+	u32 num_lanes;
 
 	port->pcie = pcie;
 
@@ -998,6 +1012,9 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
 		port->lane = 0;
 
+	if (!of_property_read_u32(child, "num-lanes", &num_lanes) && num_lanes == 4)
+		port->is_x4 = true;
+
 	port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
 				    port->lane);
 	if (!port->name) {
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode
Date: Wed, 12 Jan 2022 16:18:08 +0100	[thread overview]
Message-ID: <20220112151814.24361-6-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>

If x1/x4 mode is not set correctly then link with endpoint card is not
established.

Use DTS property 'num-lanes' to deteriminate x1/x4 mode.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index a075ba26cff1..0f2ec0a17874 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -93,6 +93,7 @@ struct mvebu_pcie_port {
 	void __iomem *base;
 	u32 port;
 	u32 lane;
+	bool is_x4;
 	int devfn;
 	unsigned int mem_target;
 	unsigned int mem_attr;
@@ -233,13 +234,25 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u32 ctrl, cmd, dev_rev, mask;
+	u32 ctrl, lnkcap, cmd, dev_rev, mask;
 
 	/* Setup PCIe controller to Root Complex mode. */
 	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
 	ctrl |= PCIE_CTRL_RC_MODE;
 	mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
 
+	/*
+	 * Set Maximum Link Width to X1 or X4 in Root Port's PCIe Link
+	 * Capability register. This register is defined by PCIe specification
+	 * as read-only but this mvebu controller has it as read-write and must
+	 * be set to number of SerDes PCIe lanes (1 or 4). If this register is
+	 * not set correctly then link with endpoint card is not established.
+	 */
+	lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
+	lnkcap |= (port->is_x4 ? 4 : 1) << 4;
+	mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
+
 	/* Disable Root Bridge I/O space, memory space and bus mastering. */
 	cmd = mvebu_readl(port, PCIE_CMD_OFF);
 	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
@@ -986,6 +999,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	struct device *dev = &pcie->pdev->dev;
 	enum of_gpio_flags flags;
 	int reset_gpio, ret;
+	u32 num_lanes;
 
 	port->pcie = pcie;
 
@@ -998,6 +1012,9 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
 		port->lane = 0;
 
+	if (!of_property_read_u32(child, "num-lanes", &num_lanes) && num_lanes == 4)
+		port->is_x4 = true;
+
 	port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
 				    port->lane);
 	if (!port->name) {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-01-12 15:19 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 15:02 [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-05 15:02 ` Pali Rohár
2022-01-05 15:02 ` [PATCH 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12  1:29   ` Rob Herring
2022-01-12  1:29     ` Rob Herring
2022-01-05 15:02 ` [PATCH 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:41   ` Rob Herring
2022-01-05 15:41     ` Rob Herring
2022-01-05 15:49     ` Pali Rohár
2022-01-05 15:49       ` Pali Rohár
2022-01-12  1:43     ` Pali Rohár
2022-01-12  1:43       ` Pali Rohár
2022-01-12 14:53       ` Rob Herring
2022-01-12 14:53         ` Rob Herring
2022-01-05 15:02 ` [PATCH 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12  1:30   ` Rob Herring
2022-01-12  1:30     ` Rob Herring
2022-01-05 15:02 ` [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-06 15:28   ` Marc Zyngier
2022-01-06 15:28     ` Marc Zyngier
2022-01-06 15:44     ` Pali Rohár
2022-01-06 15:44       ` Pali Rohár
2022-01-06 15:55       ` Marc Zyngier
2022-01-06 15:55         ` Marc Zyngier
2022-01-06 16:20         ` Pali Rohár
2022-01-06 16:20           ` Pali Rohár
2022-01-06 16:27           ` Marc Zyngier
2022-01-06 16:27             ` Marc Zyngier
2022-01-06 17:20             ` Marek Behún
2022-01-06 17:20               ` Marek Behún
2022-01-06 17:31               ` Marc Zyngier
2022-01-06 17:31                 ` Marc Zyngier
2022-01-07 11:50                 ` Pali Rohár
2022-01-07 11:50                   ` Pali Rohár
2022-01-07 18:53                   ` Marc Zyngier
2022-01-07 18:53                     ` Marc Zyngier
2022-01-05 15:02 ` [PATCH 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12 15:18 ` [PATCH v2 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-12 15:18   ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` Pali Rohár [this message]
2022-01-12 15:18     ` [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-20 17:09     ` Rob Herring
2022-01-20 17:09       ` Rob Herring
2022-01-20 17:19       ` Pali Rohár
2022-01-20 17:19         ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-20 16:49     ` Rob Herring
2022-01-20 16:49       ` Rob Herring
2022-01-20 16:55       ` Pali Rohár
2022-01-20 16:55         ` Pali Rohár
2022-01-20 18:40         ` Rob Herring
2022-01-20 18:40           ` Rob Herring
2022-01-12 15:18   ` [PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:36     ` Marek Behún
2022-01-12 15:36       ` Marek Behún
2022-01-12 15:18   ` [PATCH v2 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-02-11 17:19     ` Lorenzo Pieralisi
2022-02-11 17:19       ` Lorenzo Pieralisi
2022-02-11 17:52       ` Pali Rohár
2022-02-11 17:52         ` Pali Rohár
2022-02-11 18:21         ` Lorenzo Pieralisi
2022-02-11 18:21           ` Lorenzo Pieralisi
2022-02-12 10:59           ` Marc Zyngier
2022-02-12 10:59             ` Marc Zyngier
2022-02-16 23:40         ` Pali Rohár
2022-02-16 23:40           ` Pali Rohár
2022-02-22 10:21           ` Lorenzo Pieralisi
2022-02-22 10:21             ` Lorenzo Pieralisi
2022-02-22 10:51             ` Pali Rohár
2022-02-22 10:51               ` Pali Rohár
2022-02-22 15:24               ` Lorenzo Pieralisi
2022-02-22 15:24                 ` Lorenzo Pieralisi
2022-02-22 15:42                 ` Pali Rohár
2022-02-22 15:42                   ` Pali Rohár
2022-02-22 15:45                   ` Lorenzo Pieralisi
2022-02-22 15:45                     ` Lorenzo Pieralisi
2022-02-22 15:55                     ` Pali Rohár
2022-02-22 15:55                       ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-02-14 15:07     ` Gregory CLEMENT
2022-02-14 15:07       ` Gregory CLEMENT
2022-02-14 15:09       ` Pali Rohár
2022-02-14 15:09         ` Pali Rohár
2022-02-14 15:26         ` Gregory CLEMENT
2022-02-14 15:26           ` Gregory CLEMENT
     [not found]           ` <CAEzXK1qYKVk7QiSY_DwqkZ7WV6WU06WBtiqZx0JJCc+mOP-7Kg@mail.gmail.com>
2022-02-15 10:48             ` Luís Mendes
2022-02-15 10:48               ` Luís Mendes
2022-02-15 10:52               ` Pali Rohár
2022-02-15 10:52                 ` Pali Rohár
2022-02-18 21:53                 ` Luís Mendes
2022-02-18 21:53                   ` Luís Mendes
2022-02-19 13:36                   ` Pali Rohár
2022-02-19 13:36                     ` Pali Rohár
2022-02-11 17:50 ` [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Lorenzo Pieralisi
2022-02-11 17:50   ` Lorenzo Pieralisi
2022-02-11 18:01   ` Pali Rohár
2022-02-11 18:01     ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220112151814.24361-6-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.