All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers on emulated bridge
Date: Wed, 12 Jan 2022 16:18:10 +0100	[thread overview]
Message-ID: <20220112151814.24361-8-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>

AER registers start at mvebu offset 0x0100. Registers PCI_ERR_ROOT_COMMAND,
PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC are not supported on pre-XP
hardware and returns zeros.

Note that AER interrupt is not supported yet as mvebu emulated bridge does
not implement interrupts support at all yet.

Also remove custom macro PCIE_HEADER_LOG_4_OFF as it is unused and
correctly this register should be referenced via standard macros with
offset, e.g. as: PCIE_CAP_PCIERR_OFF + PCI_ERR_HEADER_LOG + 4.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 67 +++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 811af9e6ede5..9ea2f6a7c2b0 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -34,7 +34,7 @@
 #define PCIE_BAR_HI_OFF(n)	(0x0014 + ((n) << 3))
 #define PCIE_SSDEV_ID_OFF	0x002c
 #define PCIE_CAP_PCIEXP		0x0060
-#define PCIE_HEADER_LOG_4_OFF	0x0128
+#define PCIE_CAP_PCIERR_OFF	0x0100
 #define PCIE_BAR_CTRL_OFF(n)	(0x1804 + (((n) - 1) * 4))
 #define PCIE_WIN04_CTRL_OFF(n)	(0x1820 + ((n) << 4))
 #define PCIE_WIN04_BASE_OFF(n)	(0x1824 + ((n) << 4))
@@ -603,6 +603,37 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 	return PCI_BRIDGE_EMUL_HANDLED;
 }
 
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge,
+				    int reg, u32 *value)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	case 0:
+	case PCI_ERR_UNCOR_STATUS:
+	case PCI_ERR_UNCOR_MASK:
+	case PCI_ERR_UNCOR_SEVER:
+	case PCI_ERR_COR_STATUS:
+	case PCI_ERR_COR_MASK:
+	case PCI_ERR_CAP:
+	case PCI_ERR_HEADER_LOG+0:
+	case PCI_ERR_HEADER_LOG+4:
+	case PCI_ERR_HEADER_LOG+8:
+	case PCI_ERR_HEADER_LOG+12:
+	case PCI_ERR_ROOT_COMMAND:
+	case PCI_ERR_ROOT_STATUS:
+	case PCI_ERR_ROOT_ERR_SRC:
+		*value = mvebu_readl(port, PCIE_CAP_PCIERR_OFF + reg);
+		break;
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+
+	return PCI_BRIDGE_EMUL_HANDLED;
+}
+
 static void
 mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 				      int reg, u32 old, u32 new, u32 mask)
@@ -715,11 +746,45 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 	}
 }
 
+static void
+mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge,
+				     int reg, u32 old, u32 new, u32 mask)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	/* These are W1C registers, so clear other bits */
+	case PCI_ERR_UNCOR_STATUS:
+	case PCI_ERR_COR_STATUS:
+	case PCI_ERR_ROOT_STATUS:
+		new &= mask;
+		fallthrough;
+
+	case PCI_ERR_UNCOR_MASK:
+	case PCI_ERR_UNCOR_SEVER:
+	case PCI_ERR_COR_MASK:
+	case PCI_ERR_CAP:
+	case PCI_ERR_HEADER_LOG+0:
+	case PCI_ERR_HEADER_LOG+4:
+	case PCI_ERR_HEADER_LOG+8:
+	case PCI_ERR_HEADER_LOG+12:
+	case PCI_ERR_ROOT_COMMAND:
+	case PCI_ERR_ROOT_ERR_SRC:
+		mvebu_writel(port, new, PCIE_CAP_PCIERR_OFF + reg);
+		break;
+
+	default:
+		break;
+	}
+}
+
 static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
 	.read_base = mvebu_pci_bridge_emul_base_conf_read,
 	.write_base = mvebu_pci_bridge_emul_base_conf_write,
 	.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
 	.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
+	.read_ext = mvebu_pci_bridge_emul_ext_conf_read,
+	.write_ext = mvebu_pci_bridge_emul_ext_conf_write,
 };
 
 /*
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: "Pali Rohár" <pali@kernel.org>
To: "Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Russell King" <rmk+kernel@armlinux.org.uk>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers on emulated bridge
Date: Wed, 12 Jan 2022 16:18:10 +0100	[thread overview]
Message-ID: <20220112151814.24361-8-pali@kernel.org> (raw)
In-Reply-To: <20220112151814.24361-1-pali@kernel.org>

AER registers start at mvebu offset 0x0100. Registers PCI_ERR_ROOT_COMMAND,
PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC are not supported on pre-XP
hardware and returns zeros.

Note that AER interrupt is not supported yet as mvebu emulated bridge does
not implement interrupts support at all yet.

Also remove custom macro PCIE_HEADER_LOG_4_OFF as it is unused and
correctly this register should be referenced via standard macros with
offset, e.g. as: PCIE_CAP_PCIERR_OFF + PCI_ERR_HEADER_LOG + 4.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-mvebu.c | 67 +++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 811af9e6ede5..9ea2f6a7c2b0 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -34,7 +34,7 @@
 #define PCIE_BAR_HI_OFF(n)	(0x0014 + ((n) << 3))
 #define PCIE_SSDEV_ID_OFF	0x002c
 #define PCIE_CAP_PCIEXP		0x0060
-#define PCIE_HEADER_LOG_4_OFF	0x0128
+#define PCIE_CAP_PCIERR_OFF	0x0100
 #define PCIE_BAR_CTRL_OFF(n)	(0x1804 + (((n) - 1) * 4))
 #define PCIE_WIN04_CTRL_OFF(n)	(0x1820 + ((n) << 4))
 #define PCIE_WIN04_BASE_OFF(n)	(0x1824 + ((n) << 4))
@@ -603,6 +603,37 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 	return PCI_BRIDGE_EMUL_HANDLED;
 }
 
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge,
+				    int reg, u32 *value)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	case 0:
+	case PCI_ERR_UNCOR_STATUS:
+	case PCI_ERR_UNCOR_MASK:
+	case PCI_ERR_UNCOR_SEVER:
+	case PCI_ERR_COR_STATUS:
+	case PCI_ERR_COR_MASK:
+	case PCI_ERR_CAP:
+	case PCI_ERR_HEADER_LOG+0:
+	case PCI_ERR_HEADER_LOG+4:
+	case PCI_ERR_HEADER_LOG+8:
+	case PCI_ERR_HEADER_LOG+12:
+	case PCI_ERR_ROOT_COMMAND:
+	case PCI_ERR_ROOT_STATUS:
+	case PCI_ERR_ROOT_ERR_SRC:
+		*value = mvebu_readl(port, PCIE_CAP_PCIERR_OFF + reg);
+		break;
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+
+	return PCI_BRIDGE_EMUL_HANDLED;
+}
+
 static void
 mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 				      int reg, u32 old, u32 new, u32 mask)
@@ -715,11 +746,45 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 	}
 }
 
+static void
+mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge,
+				     int reg, u32 old, u32 new, u32 mask)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	/* These are W1C registers, so clear other bits */
+	case PCI_ERR_UNCOR_STATUS:
+	case PCI_ERR_COR_STATUS:
+	case PCI_ERR_ROOT_STATUS:
+		new &= mask;
+		fallthrough;
+
+	case PCI_ERR_UNCOR_MASK:
+	case PCI_ERR_UNCOR_SEVER:
+	case PCI_ERR_COR_MASK:
+	case PCI_ERR_CAP:
+	case PCI_ERR_HEADER_LOG+0:
+	case PCI_ERR_HEADER_LOG+4:
+	case PCI_ERR_HEADER_LOG+8:
+	case PCI_ERR_HEADER_LOG+12:
+	case PCI_ERR_ROOT_COMMAND:
+	case PCI_ERR_ROOT_ERR_SRC:
+		mvebu_writel(port, new, PCIE_CAP_PCIERR_OFF + reg);
+		break;
+
+	default:
+		break;
+	}
+}
+
 static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
 	.read_base = mvebu_pci_bridge_emul_base_conf_read,
 	.write_base = mvebu_pci_bridge_emul_base_conf_write,
 	.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
 	.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
+	.read_ext = mvebu_pci_bridge_emul_ext_conf_read,
+	.write_ext = mvebu_pci_bridge_emul_ext_conf_write,
 };
 
 /*
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-01-12 15:19 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 15:02 [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-05 15:02 ` Pali Rohár
2022-01-05 15:02 ` [PATCH 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12  1:29   ` Rob Herring
2022-01-12  1:29     ` Rob Herring
2022-01-05 15:02 ` [PATCH 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:02 ` [PATCH 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-05 15:41   ` Rob Herring
2022-01-05 15:41     ` Rob Herring
2022-01-05 15:49     ` Pali Rohár
2022-01-05 15:49       ` Pali Rohár
2022-01-12  1:43     ` Pali Rohár
2022-01-12  1:43       ` Pali Rohár
2022-01-12 14:53       ` Rob Herring
2022-01-12 14:53         ` Rob Herring
2022-01-05 15:02 ` [PATCH 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12  1:30   ` Rob Herring
2022-01-12  1:30     ` Rob Herring
2022-01-05 15:02 ` [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-06 15:28   ` Marc Zyngier
2022-01-06 15:28     ` Marc Zyngier
2022-01-06 15:44     ` Pali Rohár
2022-01-06 15:44       ` Pali Rohár
2022-01-06 15:55       ` Marc Zyngier
2022-01-06 15:55         ` Marc Zyngier
2022-01-06 16:20         ` Pali Rohár
2022-01-06 16:20           ` Pali Rohár
2022-01-06 16:27           ` Marc Zyngier
2022-01-06 16:27             ` Marc Zyngier
2022-01-06 17:20             ` Marek Behún
2022-01-06 17:20               ` Marek Behún
2022-01-06 17:31               ` Marc Zyngier
2022-01-06 17:31                 ` Marc Zyngier
2022-01-07 11:50                 ` Pali Rohár
2022-01-07 11:50                   ` Pali Rohár
2022-01-07 18:53                   ` Marc Zyngier
2022-01-07 18:53                     ` Marc Zyngier
2022-01-05 15:02 ` [PATCH 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-05 15:02   ` Pali Rohár
2022-01-12 15:18 ` [PATCH v2 00/11] PCI: mvebu: subsystem ids, AER and INTx Pali Rohár
2022-01-12 15:18   ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 01/11] PCI: pci-bridge-emul: Re-arrange register tests Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 02/11] PCI: pci-bridge-emul: Add support for PCIe extended capabilities Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 03/11] PCI: pci-bridge-emul: Add support for PCI Bridge Subsystem Vendor ID capability Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 04/11] dt-bindings: PCI: mvebu: Add num-lanes property Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 05/11] PCI: mvebu: Correctly configure x1/x4 mode Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-20 17:09     ` Rob Herring
2022-01-20 17:09       ` Rob Herring
2022-01-20 17:19       ` Pali Rohár
2022-01-20 17:19         ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 06/11] PCI: mvebu: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:18   ` Pali Rohár [this message]
2022-01-12 15:18     ` [PATCH v2 07/11] PCI: mvebu: Add support for Advanced Error Reporting registers " Pali Rohár
2022-01-12 15:18   ` [PATCH v2 08/11] PCI: mvebu: Use child_ops API Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-20 16:49     ` Rob Herring
2022-01-20 16:49       ` Rob Herring
2022-01-20 16:55       ` Pali Rohár
2022-01-20 16:55         ` Pali Rohár
2022-01-20 18:40         ` Rob Herring
2022-01-20 18:40           ` Rob Herring
2022-01-12 15:18   ` [PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-01-12 15:36     ` Marek Behún
2022-01-12 15:36       ` Marek Behún
2022-01-12 15:18   ` [PATCH v2 10/11] PCI: mvebu: Implement support for legacy INTx interrupts Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-02-11 17:19     ` Lorenzo Pieralisi
2022-02-11 17:19       ` Lorenzo Pieralisi
2022-02-11 17:52       ` Pali Rohár
2022-02-11 17:52         ` Pali Rohár
2022-02-11 18:21         ` Lorenzo Pieralisi
2022-02-11 18:21           ` Lorenzo Pieralisi
2022-02-12 10:59           ` Marc Zyngier
2022-02-12 10:59             ` Marc Zyngier
2022-02-16 23:40         ` Pali Rohár
2022-02-16 23:40           ` Pali Rohár
2022-02-22 10:21           ` Lorenzo Pieralisi
2022-02-22 10:21             ` Lorenzo Pieralisi
2022-02-22 10:51             ` Pali Rohár
2022-02-22 10:51               ` Pali Rohár
2022-02-22 15:24               ` Lorenzo Pieralisi
2022-02-22 15:24                 ` Lorenzo Pieralisi
2022-02-22 15:42                 ` Pali Rohár
2022-02-22 15:42                   ` Pali Rohár
2022-02-22 15:45                   ` Lorenzo Pieralisi
2022-02-22 15:45                     ` Lorenzo Pieralisi
2022-02-22 15:55                     ` Pali Rohár
2022-02-22 15:55                       ` Pali Rohár
2022-01-12 15:18   ` [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe " Pali Rohár
2022-01-12 15:18     ` Pali Rohár
2022-02-14 15:07     ` Gregory CLEMENT
2022-02-14 15:07       ` Gregory CLEMENT
2022-02-14 15:09       ` Pali Rohár
2022-02-14 15:09         ` Pali Rohár
2022-02-14 15:26         ` Gregory CLEMENT
2022-02-14 15:26           ` Gregory CLEMENT
     [not found]           ` <CAEzXK1qYKVk7QiSY_DwqkZ7WV6WU06WBtiqZx0JJCc+mOP-7Kg@mail.gmail.com>
2022-02-15 10:48             ` Luís Mendes
2022-02-15 10:48               ` Luís Mendes
2022-02-15 10:52               ` Pali Rohár
2022-02-15 10:52                 ` Pali Rohár
2022-02-18 21:53                 ` Luís Mendes
2022-02-18 21:53                   ` Luís Mendes
2022-02-19 13:36                   ` Pali Rohár
2022-02-19 13:36                     ` Pali Rohár
2022-02-11 17:50 ` [PATCH 00/11] PCI: mvebu: subsystem ids, AER and INTx Lorenzo Pieralisi
2022-02-11 17:50   ` Lorenzo Pieralisi
2022-02-11 18:01   ` Pali Rohár
2022-02-11 18:01     ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220112151814.24361-8-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.