* [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-11 16:59 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
Rob Herring
v2 -- Changed binding property 'brcm,completion-timeout-msec' to
'brcm,completion-timeout-us'. (StefanW for standard suffix).
-- Warn when clamping timeout value, and include clamped
region in message. Also add min and max in YAML. (StefanW)
-- Qualify description of "brcm,completion-timeout-us" so that
it refers to PCIe transactions. (StefanW)
-- Remvove mention of Linux specifics in binding description. (StefanW)
-- s/clkreq#/CLKREQ#/g (Bjorn)
-- Refactor completion-timeout-us code to compare max and min to
value given by the property (as opposed to the computed value).
v1 -- The current driver assumes the downstream devices can
provide CLKREQ# for ASPM. These commits accomodate devices
w/ or w/o clkreq# and also handle L1SS-capable devices.
-- The Raspian Linux folks have already been using a PCIe RC
property "brcm,enable-l1ss". These commits use the same
property, in a backward-compatible manner, and the implementaion
adds more detail and also automatically identifies devices w/o
a clkreq# signal, i.e. most devices plugged into an RPi CM4
IO board.
Jim Quinlan (3):
PCI: brcmstb: CLKREQ# accomodations of downstream device
PCI: brcmstb: Set PCIe transaction completion timeout
blah blah
drivers/pci/controller/pcie-brcmstb.c | 99 ++++++++++++++++++++++++---
init/do_mounts.c | 16 ++++-
2 files changed, 102 insertions(+), 13 deletions(-)
base-commit: 76f598ba7d8e2bfb4855b5298caedd5af0c374a8
prerequisite-patch-id: f38de8681d8746126d60b3430eaf218d2dd169cd
prerequisite-patch-id: 23e13189f200358976abf5bf3600973a20cf386c
prerequisite-patch-id: edfbe6ea39ed6a4937e2cec3bb8ee0e60091546d
prerequisite-patch-id: c87dd155e8506a2a277726c47d85bf3fa83727d5
prerequisite-patch-id: 579841e1dc179517506a7a7c42e0e651b3bc3649
prerequisite-patch-id: b5b079998ea451821edffd7c52cd3d89d06046a1
prerequisite-patch-id: b51b3918e554e279b2ace1f68ed6b4176f8ccc24
prerequisite-patch-id: 333e5188fb27d0ed010f5359e83e539172a67690
prerequisite-patch-id: bb107ee7b4811a9719508ea667cad2466933dec0
prerequisite-patch-id: 1258db336e778eb57d5cbea88834cd25aa1346ba
--
2.17.1
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-11 16:59 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
Rob Herring
v2 -- Changed binding property 'brcm,completion-timeout-msec' to
'brcm,completion-timeout-us'. (StefanW for standard suffix).
-- Warn when clamping timeout value, and include clamped
region in message. Also add min and max in YAML. (StefanW)
-- Qualify description of "brcm,completion-timeout-us" so that
it refers to PCIe transactions. (StefanW)
-- Remvove mention of Linux specifics in binding description. (StefanW)
-- s/clkreq#/CLKREQ#/g (Bjorn)
-- Refactor completion-timeout-us code to compare max and min to
value given by the property (as opposed to the computed value).
v1 -- The current driver assumes the downstream devices can
provide CLKREQ# for ASPM. These commits accomodate devices
w/ or w/o clkreq# and also handle L1SS-capable devices.
-- The Raspian Linux folks have already been using a PCIe RC
property "brcm,enable-l1ss". These commits use the same
property, in a backward-compatible manner, and the implementaion
adds more detail and also automatically identifies devices w/o
a clkreq# signal, i.e. most devices plugged into an RPi CM4
IO board.
Jim Quinlan (3):
PCI: brcmstb: CLKREQ# accomodations of downstream device
PCI: brcmstb: Set PCIe transaction completion timeout
blah blah
drivers/pci/controller/pcie-brcmstb.c | 99 ++++++++++++++++++++++++---
init/do_mounts.c | 16 ++++-
2 files changed, 102 insertions(+), 13 deletions(-)
base-commit: 76f598ba7d8e2bfb4855b5298caedd5af0c374a8
prerequisite-patch-id: f38de8681d8746126d60b3430eaf218d2dd169cd
prerequisite-patch-id: 23e13189f200358976abf5bf3600973a20cf386c
prerequisite-patch-id: edfbe6ea39ed6a4937e2cec3bb8ee0e60091546d
prerequisite-patch-id: c87dd155e8506a2a277726c47d85bf3fa83727d5
prerequisite-patch-id: 579841e1dc179517506a7a7c42e0e651b3bc3649
prerequisite-patch-id: b5b079998ea451821edffd7c52cd3d89d06046a1
prerequisite-patch-id: b51b3918e554e279b2ace1f68ed6b4176f8ccc24
prerequisite-patch-id: 333e5188fb27d0ed010f5359e83e539172a67690
prerequisite-patch-id: bb107ee7b4811a9719508ea667cad2466933dec0
prerequisite-patch-id: 1258db336e778eb57d5cbea88834cd25aa1346ba
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-11 16:59 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Regarding "brcm,enable-l1ss":
The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
requires the driver probe() to deliberately place the HW one of three
CLKREQ# modes:
(a) CLKREQ# driven by the RC unconditionally
(b) CLKREQ# driven by the EP for ASPM L0s, L1
(c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
The HW+driver can tell the difference between downstream devices that
need (a) and (b), but does not know when to configure (c). Further, the
HW may cause a CPU abort on boot if guesses wrong regarding the need for
(c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
that (c) is desired. Setting this property only makes sense when the
downstream device is L1SS-capable and the OS is configured to activate
this mode (e.g. policy==superpowersave).
This property is already present in the Raspian version of Linux, but the
upstream driver implementaion that will follow adds more details and
discerns between (a) and (b).
Regarding "brcm,completion-timeout-us"
Our HW will cause a CPU abort if the L1SS exit time is longer than the
PCIe transaction completion abort timeout. We've been asked to make this
configurable, so we are introducing "brcm,completion-timeout-us".
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
.../devicetree/bindings/pci/brcm,stb-pcie.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 7e15aae7d69e..f7fc2f6561bb 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -64,6 +64,22 @@ properties:
aspm-no-l0s: true
+ brcm,enable-l1ss:
+ description: Indicates that PCIe L1SS power savings
+ are desired, the downstream device is L1SS-capable, and the
+ OS has been configured to enable this mode. Note that when
+ in this mode, this particular HW may not meet the requirement
+ that requires CLKREQ# assertion to clock active to be
+ within 400ns.
+ type: boolean
+
+ brcm,completion-timeout-us:
+ description: Number of microseconds before PCI transaction
+ completion timeout abort is signalled.
+ minimum: 16
+ default: 1000000
+ maximum: 19884107
+
brcm,scb-sizes:
description: u64 giving the 64bit PCIe memory
viewport size of a memory controller. There may be up to
--
2.17.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-11 16:59 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Regarding "brcm,enable-l1ss":
The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
requires the driver probe() to deliberately place the HW one of three
CLKREQ# modes:
(a) CLKREQ# driven by the RC unconditionally
(b) CLKREQ# driven by the EP for ASPM L0s, L1
(c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
The HW+driver can tell the difference between downstream devices that
need (a) and (b), but does not know when to configure (c). Further, the
HW may cause a CPU abort on boot if guesses wrong regarding the need for
(c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
that (c) is desired. Setting this property only makes sense when the
downstream device is L1SS-capable and the OS is configured to activate
this mode (e.g. policy==superpowersave).
This property is already present in the Raspian version of Linux, but the
upstream driver implementaion that will follow adds more details and
discerns between (a) and (b).
Regarding "brcm,completion-timeout-us"
Our HW will cause a CPU abort if the L1SS exit time is longer than the
PCIe transaction completion abort timeout. We've been asked to make this
configurable, so we are introducing "brcm,completion-timeout-us".
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
.../devicetree/bindings/pci/brcm,stb-pcie.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 7e15aae7d69e..f7fc2f6561bb 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -64,6 +64,22 @@ properties:
aspm-no-l0s: true
+ brcm,enable-l1ss:
+ description: Indicates that PCIe L1SS power savings
+ are desired, the downstream device is L1SS-capable, and the
+ OS has been configured to enable this mode. Note that when
+ in this mode, this particular HW may not meet the requirement
+ that requires CLKREQ# assertion to clock active to be
+ within 400ns.
+ type: boolean
+
+ brcm,completion-timeout-us:
+ description: Number of microseconds before PCI transaction
+ completion timeout abort is signalled.
+ minimum: 16
+ default: 1000000
+ maximum: 19884107
+
brcm,scb-sizes:
description: u64 giving the 64bit PCIe memory
viewport size of a memory controller. There may be up to
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-11 16:59 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
deliberately set by the probe() into one of three mutually exclusive modes:
(a) No CLKREQ# expected or required, refclk is always available.
(b) CLKREQ# is expected to be driven by downstream device when needed.
(c) Bidirectional CLKREQ# for L1SS capable devices.
Previously, only (b) was supported by the driver, as almost all STB/CM
boards operate in this mode. But now there is interest in activating L1SS
power savings from STB/CM customers, and also interest in accomodating mode
(a) for designs such as the RPi CM4 with IO board.
The HW+driver is able to tell us when mode (a) mode is needed. But there
is no easy way to tell if L1SS mode should be configured. In certain
situations, getting this wrong may cause a panic during boot time. So we
rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
Using this mode only makes sense when the downstream device is L1SS-capable
and the OS has been configured to activate L1SS
(e.g. policy==powersupersave).
This property has already been in use by Raspian Linux, but this
immplementation adds more details and discerns between (a) and (b)
automatically.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 69 +++++++++++++++++++++++----
1 file changed, 59 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index edf283e2b5dd..56b96aa02221 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -48,10 +48,17 @@
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00
+#define PCIE_RC_CFG_PRIV1_ROOT_CAP 0x4f8
+#define PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK 0xf8
+
#define PCIE_RC_DL_MDIO_ADDR 0x1100
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
+#define PCIE_0_RC_PL_PHY_DBG_CLKREQ2_0 0x1e30
+#define CLKREQ2_0_CLKREQ_IN_CNT_MASK 0x3f000000
+#define CLKREQ2_0_CLKREQ_IN_MASK 0x40000000
+
#define PCIE_MISC_MISC_CTRL 0x4008
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK 0x80
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK 0x400
@@ -121,9 +128,12 @@
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK 0x200000
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
#define PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x00800000
-
+#define PCIE_CLKREQ_MASK \
+ (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
+ PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
#define PCIE_INTR2_CPU_BASE 0x4300
#define PCIE_MSI_INTR2_BASE 0x4500
@@ -1024,13 +1034,58 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
return 0;
}
+static void brcm_config_clkreq(struct brcm_pcie *pcie)
+{
+ bool l1ss = of_property_read_bool(pcie->np, "brcm,enable-l1ss");
+ void __iomem *base = pcie->base;
+ u32 clkreq_set, tmp = readl(base + PCIE_0_RC_PL_PHY_DBG_CLKREQ2_0);
+ bool clkreq_in_seen;
+
+ /*
+ * We have "seen" CLKREQ# if it is asserted or has been in the past.
+ * Note that the CLKREQ_IN_MASK is 1 if CLKREQ# is asserted.
+ */
+ clkreq_in_seen = !!(tmp & CLKREQ2_0_CLKREQ_IN_MASK) ||
+ !!FIELD_GET(CLKREQ2_0_CLKREQ_IN_CNT_MASK, tmp);
+
+ /* Start with safest setting where we provide refclk regardless */
+ clkreq_set = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG) &
+ ~PCIE_CLKREQ_MASK;
+
+ if (l1ss && IS_ENABLED(CONFIG_PCIEASPM)) {
+ /*
+ * Note: This (l1ss) mode may not meet requirement for
+ * downstream devices that require CLKREQ# assertion to
+ * clock active within 400ns.
+ */
+ clkreq_set |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK;
+ dev_info(pcie->dev, "bi-dir CLKREQ# for l1ss-capable devs\n");
+ dev_info(pcie->dev, "ASPM policy should be set to \"powersupersave\"\n");
+ } else {
+ if (clkreq_in_seen && IS_ENABLED(CONFIG_PCIEASPM)) {
+ clkreq_set |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
+ dev_info(pcie->dev, "uni-dir CLKREQ# for ASPM\n");
+ } else {
+ dev_info(pcie->dev, "CLKREQ# ignored; no ASPM\n");
+ /* Might as well unadvertise ASPM */
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY) &
+ ~PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK;
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+ }
+ /* Setting the field to 2 unadvertises L1SS support */
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
+ u32p_replace_bits(&tmp, 2, PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK);
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
+ }
+ writel(clkreq_set, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+}
+
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
{
struct device *dev = pcie->dev;
void __iomem *base = pcie->base;
u16 nlw, cls, lnksta;
bool ssc_good = false;
- u32 tmp;
int ret, i;
/* Unassert the fundamental reset */
@@ -1055,6 +1110,8 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
return -ENODEV;
}
+ brcm_config_clkreq(pcie);
+
if (pcie->gen)
brcm_pcie_set_gen(pcie, pcie->gen);
@@ -1073,14 +1130,6 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
pci_speed_string(pcie_link_speed[cls]), nlw,
ssc_good ? "(SSC)" : "(!SSC)");
- /*
- * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
- * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
- */
- tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
- tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
- writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
-
return 0;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-11 16:59 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
deliberately set by the probe() into one of three mutually exclusive modes:
(a) No CLKREQ# expected or required, refclk is always available.
(b) CLKREQ# is expected to be driven by downstream device when needed.
(c) Bidirectional CLKREQ# for L1SS capable devices.
Previously, only (b) was supported by the driver, as almost all STB/CM
boards operate in this mode. But now there is interest in activating L1SS
power savings from STB/CM customers, and also interest in accomodating mode
(a) for designs such as the RPi CM4 with IO board.
The HW+driver is able to tell us when mode (a) mode is needed. But there
is no easy way to tell if L1SS mode should be configured. In certain
situations, getting this wrong may cause a panic during boot time. So we
rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
Using this mode only makes sense when the downstream device is L1SS-capable
and the OS has been configured to activate L1SS
(e.g. policy==powersupersave).
This property has already been in use by Raspian Linux, but this
immplementation adds more details and discerns between (a) and (b)
automatically.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 69 +++++++++++++++++++++++----
1 file changed, 59 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index edf283e2b5dd..56b96aa02221 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -48,10 +48,17 @@
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00
+#define PCIE_RC_CFG_PRIV1_ROOT_CAP 0x4f8
+#define PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK 0xf8
+
#define PCIE_RC_DL_MDIO_ADDR 0x1100
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
+#define PCIE_0_RC_PL_PHY_DBG_CLKREQ2_0 0x1e30
+#define CLKREQ2_0_CLKREQ_IN_CNT_MASK 0x3f000000
+#define CLKREQ2_0_CLKREQ_IN_MASK 0x40000000
+
#define PCIE_MISC_MISC_CTRL 0x4008
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK 0x80
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK 0x400
@@ -121,9 +128,12 @@
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK 0x200000
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
#define PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x00800000
-
+#define PCIE_CLKREQ_MASK \
+ (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
+ PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
#define PCIE_INTR2_CPU_BASE 0x4300
#define PCIE_MSI_INTR2_BASE 0x4500
@@ -1024,13 +1034,58 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
return 0;
}
+static void brcm_config_clkreq(struct brcm_pcie *pcie)
+{
+ bool l1ss = of_property_read_bool(pcie->np, "brcm,enable-l1ss");
+ void __iomem *base = pcie->base;
+ u32 clkreq_set, tmp = readl(base + PCIE_0_RC_PL_PHY_DBG_CLKREQ2_0);
+ bool clkreq_in_seen;
+
+ /*
+ * We have "seen" CLKREQ# if it is asserted or has been in the past.
+ * Note that the CLKREQ_IN_MASK is 1 if CLKREQ# is asserted.
+ */
+ clkreq_in_seen = !!(tmp & CLKREQ2_0_CLKREQ_IN_MASK) ||
+ !!FIELD_GET(CLKREQ2_0_CLKREQ_IN_CNT_MASK, tmp);
+
+ /* Start with safest setting where we provide refclk regardless */
+ clkreq_set = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG) &
+ ~PCIE_CLKREQ_MASK;
+
+ if (l1ss && IS_ENABLED(CONFIG_PCIEASPM)) {
+ /*
+ * Note: This (l1ss) mode may not meet requirement for
+ * downstream devices that require CLKREQ# assertion to
+ * clock active within 400ns.
+ */
+ clkreq_set |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK;
+ dev_info(pcie->dev, "bi-dir CLKREQ# for l1ss-capable devs\n");
+ dev_info(pcie->dev, "ASPM policy should be set to \"powersupersave\"\n");
+ } else {
+ if (clkreq_in_seen && IS_ENABLED(CONFIG_PCIEASPM)) {
+ clkreq_set |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
+ dev_info(pcie->dev, "uni-dir CLKREQ# for ASPM\n");
+ } else {
+ dev_info(pcie->dev, "CLKREQ# ignored; no ASPM\n");
+ /* Might as well unadvertise ASPM */
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY) &
+ ~PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK;
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+ }
+ /* Setting the field to 2 unadvertises L1SS support */
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
+ u32p_replace_bits(&tmp, 2, PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK);
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_ROOT_CAP);
+ }
+ writel(clkreq_set, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+}
+
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
{
struct device *dev = pcie->dev;
void __iomem *base = pcie->base;
u16 nlw, cls, lnksta;
bool ssc_good = false;
- u32 tmp;
int ret, i;
/* Unassert the fundamental reset */
@@ -1055,6 +1110,8 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
return -ENODEV;
}
+ brcm_config_clkreq(pcie);
+
if (pcie->gen)
brcm_pcie_set_gen(pcie, pcie->gen);
@@ -1073,14 +1130,6 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
pci_speed_string(pcie_link_speed[cls]), nlw,
ssc_good ? "(SSC)" : "(!SSC)");
- /*
- * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
- * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
- */
- tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
- tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
- writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
-
return 0;
}
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v2 3/3] PCI: brcmstb: Set PCIe transaction completion timeout
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-11 16:59 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
Since the STB PCIe HW will cause a CPU abort on a PCIe transaction
completion timeout abort, we might as well extend the default timeout
limit. Further, different devices and systems may requires a larger or
smaller amount commensurate with their L1SS exit time, so the property
"brcm,completion-abort-us" may be used to set a custom timeout value.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 30 +++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 56b96aa02221..9610066f8c80 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1080,6 +1080,35 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
writel(clkreq_set, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
}
+static void brcm_config_completion_timeout(struct brcm_pcie *pcie)
+{
+ /* TIMEOUT register is two registers before RGR1_SW_INIT_1 */
+ const char *fmt = "brcm,completion-timeout-us clamped to region [%u..%u]\n";
+ const unsigned int REG_OFFSET = PCIE_RGR1_SW_INIT_1(pcie) - 8;
+ const u32 timeout_us_min = 16;
+ const u32 timeout_us_max = 19884107;
+ u32 timeout_us = 1000000; /* Our default, 1 second */
+ int rval, ret;
+
+ ret = of_property_read_u32(pcie->np, "brcm,completion-timeout-us",
+ &timeout_us);
+ if (ret && ret != -EINVAL)
+ dev_err(pcie->dev, "malformed/invalid 'brcm,completion-timeout-us'\n");
+
+ /* If needed, clamp the requested timeout value and issue a warning */
+ if (timeout_us < timeout_us_min) {
+ timeout_us = timeout_us_min;
+ dev_warn(pcie->dev, fmt, timeout_us_min, timeout_us_max);
+ } else if (timeout_us > timeout_us_max) {
+ timeout_us = timeout_us_max;
+ dev_warn(pcie->dev, fmt, timeout_us_min, timeout_us_max);
+ }
+
+ /* Each unit in timeout register is 1/216,000,000 seconds */
+ rval = 216 * timeout_us;
+ writel(rval, pcie->base + REG_OFFSET);
+}
+
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
{
struct device *dev = pcie->dev;
@@ -1110,6 +1139,7 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
return -ENODEV;
}
+ brcm_config_completion_timeout(pcie);
brcm_config_clkreq(pcie);
if (pcie->gen)
--
2.17.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v2 3/3] PCI: brcmstb: Set PCIe transaction completion timeout
@ 2023-04-11 16:59 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-11 16:59 UTC (permalink / raw)
To: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, jim2101024, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
Since the STB PCIe HW will cause a CPU abort on a PCIe transaction
completion timeout abort, we might as well extend the default timeout
limit. Further, different devices and systems may requires a larger or
smaller amount commensurate with their L1SS exit time, so the property
"brcm,completion-abort-us" may be used to set a custom timeout value.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 30 +++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 56b96aa02221..9610066f8c80 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1080,6 +1080,35 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
writel(clkreq_set, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
}
+static void brcm_config_completion_timeout(struct brcm_pcie *pcie)
+{
+ /* TIMEOUT register is two registers before RGR1_SW_INIT_1 */
+ const char *fmt = "brcm,completion-timeout-us clamped to region [%u..%u]\n";
+ const unsigned int REG_OFFSET = PCIE_RGR1_SW_INIT_1(pcie) - 8;
+ const u32 timeout_us_min = 16;
+ const u32 timeout_us_max = 19884107;
+ u32 timeout_us = 1000000; /* Our default, 1 second */
+ int rval, ret;
+
+ ret = of_property_read_u32(pcie->np, "brcm,completion-timeout-us",
+ &timeout_us);
+ if (ret && ret != -EINVAL)
+ dev_err(pcie->dev, "malformed/invalid 'brcm,completion-timeout-us'\n");
+
+ /* If needed, clamp the requested timeout value and issue a warning */
+ if (timeout_us < timeout_us_min) {
+ timeout_us = timeout_us_min;
+ dev_warn(pcie->dev, fmt, timeout_us_min, timeout_us_max);
+ } else if (timeout_us > timeout_us_max) {
+ timeout_us = timeout_us_max;
+ dev_warn(pcie->dev, fmt, timeout_us_min, timeout_us_max);
+ }
+
+ /* Each unit in timeout register is 1/216,000,000 seconds */
+ rval = 216 * timeout_us;
+ writel(rval, pcie->base + REG_OFFSET);
+}
+
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
{
struct device *dev = pcie->dev;
@@ -1110,6 +1139,7 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
return -ENODEV;
}
+ brcm_config_completion_timeout(pcie);
brcm_config_clkreq(pcie);
if (pcie->gen)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [PATCH v2 3/3] PCI: brcmstb: Set PCIe transaction completion timeout
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-12 0:26 ` Cyril Brulebois
-1 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-12 0:26 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1: Type: text/plain, Size: 1079 bytes --]
Hi Jim,
Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> Since the STB PCIe HW will cause a CPU abort on a PCIe transaction
> completion timeout abort, we might as well extend the default timeout
> limit. Further, different devices and systems may requires a larger or
> smaller amount commensurate with their L1SS exit time, so the property
> "brcm,completion-abort-us" may be used to set a custom timeout value.
^^^^^^^^^^^^^^^^^^^^^^^^
> + ret = of_property_read_u32(pcie->np, "brcm,completion-timeout-us",
> + &timeout_us);
> + if (ret && ret != -EINVAL)
> + dev_err(pcie->dev, "malformed/invalid 'brcm,completion-timeout-us'\n");
v2 renames brcm,completion-abort-msecs into brcm,completion-timeout-us
but the commit message mentions the half-way brcm,completion-abort-us
property instead.
(Also spotted “immplementation” in 2/3 but I thought I'd spare everyone
an extra mail.)
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 3/3] PCI: brcmstb: Set PCIe transaction completion timeout
@ 2023-04-12 0:26 ` Cyril Brulebois
0 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-12 0:26 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1: Type: text/plain, Size: 1079 bytes --]
Hi Jim,
Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> Since the STB PCIe HW will cause a CPU abort on a PCIe transaction
> completion timeout abort, we might as well extend the default timeout
> limit. Further, different devices and systems may requires a larger or
> smaller amount commensurate with their L1SS exit time, so the property
> "brcm,completion-abort-us" may be used to set a custom timeout value.
^^^^^^^^^^^^^^^^^^^^^^^^
> + ret = of_property_read_u32(pcie->np, "brcm,completion-timeout-us",
> + &timeout_us);
> + if (ret && ret != -EINVAL)
> + dev_err(pcie->dev, "malformed/invalid 'brcm,completion-timeout-us'\n");
v2 renames brcm,completion-abort-msecs into brcm,completion-timeout-us
but the commit message mentions the half-way brcm,completion-abort-us
property instead.
(Also spotted “immplementation” in 2/3 but I thought I'd spare everyone
an extra mail.)
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-12 8:09 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 57+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-12 8:09 UTC (permalink / raw)
To: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 11/04/2023 18:59, Jim Quinlan wrote:
> Regarding "brcm,enable-l1ss":
>
> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> requires the driver probe() to deliberately place the HW one of three
> CLKREQ# modes:
>
> (a) CLKREQ# driven by the RC unconditionally
> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>
> The HW+driver can tell the difference between downstream devices that
> need (a) and (b), but does not know when to configure (c). Further, the
> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> that (c) is desired. Setting this property only makes sense when the
> downstream device is L1SS-capable and the OS is configured to activate
> this mode (e.g. policy==superpowersave).
>
> This property is already present in the Raspian version of Linux, but the
> upstream driver implementaion that will follow adds more details and
typo, implementation
> discerns between (a) and (b).
>
> Regarding "brcm,completion-timeout-us"
>
> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> PCIe transaction completion abort timeout. We've been asked to make this
> configurable, so we are introducing "brcm,completion-timeout-us".
>
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
What happened here? Where is the changelog?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 8:09 ` Krzysztof Kozlowski
0 siblings, 0 replies; 57+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-12 8:09 UTC (permalink / raw)
To: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 11/04/2023 18:59, Jim Quinlan wrote:
> Regarding "brcm,enable-l1ss":
>
> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> requires the driver probe() to deliberately place the HW one of three
> CLKREQ# modes:
>
> (a) CLKREQ# driven by the RC unconditionally
> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>
> The HW+driver can tell the difference between downstream devices that
> need (a) and (b), but does not know when to configure (c). Further, the
> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> that (c) is desired. Setting this property only makes sense when the
> downstream device is L1SS-capable and the OS is configured to activate
> this mode (e.g. policy==superpowersave).
>
> This property is already present in the Raspian version of Linux, but the
> upstream driver implementaion that will follow adds more details and
typo, implementation
> discerns between (a) and (b).
>
> Regarding "brcm,completion-timeout-us"
>
> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> PCIe transaction completion abort timeout. We've been asked to make this
> configurable, so we are introducing "brcm,completion-timeout-us".
>
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
What happened here? Where is the changelog?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 8:09 ` Krzysztof Kozlowski
@ 2023-04-12 11:49 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-12 11:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Jim Quinlan, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> On 11/04/2023 18:59, Jim Quinlan wrote:
>> Regarding "brcm,enable-l1ss":
>>
>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>> requires the driver probe() to deliberately place the HW one of three
>> CLKREQ# modes:
>>
>> (a) CLKREQ# driven by the RC unconditionally
>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>
>> The HW+driver can tell the difference between downstream devices that
>> need (a) and (b), but does not know when to configure (c). Further, the
>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>> that (c) is desired. Setting this property only makes sense when the
>> downstream device is L1SS-capable and the OS is configured to activate
>> this mode (e.g. policy==superpowersave).
>>
>> This property is already present in the Raspian version of Linux, but the
>> upstream driver implementaion that will follow adds more details and
>
> typo, implementation
>
>> discerns between (a) and (b).
>>
>> Regarding "brcm,completion-timeout-us"
>>
>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>> PCIe transaction completion abort timeout. We've been asked to make this
>> configurable, so we are introducing "brcm,completion-timeout-us".
>>
>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> What happened here? Where is the changelog?
It is in the cover letter:
https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
but it does not look like the cover letter was copied to you or Rob.
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 11:49 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-12 11:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Jim Quinlan, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan
Cc: Florian Fainelli, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> On 11/04/2023 18:59, Jim Quinlan wrote:
>> Regarding "brcm,enable-l1ss":
>>
>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>> requires the driver probe() to deliberately place the HW one of three
>> CLKREQ# modes:
>>
>> (a) CLKREQ# driven by the RC unconditionally
>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>
>> The HW+driver can tell the difference between downstream devices that
>> need (a) and (b), but does not know when to configure (c). Further, the
>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>> that (c) is desired. Setting this property only makes sense when the
>> downstream device is L1SS-capable and the OS is configured to activate
>> this mode (e.g. policy==superpowersave).
>>
>> This property is already present in the Raspian version of Linux, but the
>> upstream driver implementaion that will follow adds more details and
>
> typo, implementation
>
>> discerns between (a) and (b).
>>
>> Regarding "brcm,completion-timeout-us"
>>
>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>> PCIe transaction completion abort timeout. We've been asked to make this
>> configurable, so we are introducing "brcm,completion-timeout-us".
>>
>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> What happened here? Where is the changelog?
It is in the cover letter:
https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
but it does not look like the cover letter was copied to you or Rob.
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 11:49 ` Florian Fainelli
@ 2023-04-12 11:56 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 57+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-12 11:56 UTC (permalink / raw)
To: Florian Fainelli, Jim Quinlan, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 12/04/2023 13:49, Florian Fainelli wrote:
>
>
> On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
>> On 11/04/2023 18:59, Jim Quinlan wrote:
>>> Regarding "brcm,enable-l1ss":
>>>
>>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>>> requires the driver probe() to deliberately place the HW one of three
>>> CLKREQ# modes:
>>>
>>> (a) CLKREQ# driven by the RC unconditionally
>>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>>
>>> The HW+driver can tell the difference between downstream devices that
>>> need (a) and (b), but does not know when to configure (c). Further, the
>>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>>> that (c) is desired. Setting this property only makes sense when the
>>> downstream device is L1SS-capable and the OS is configured to activate
>>> this mode (e.g. policy==superpowersave).
>>>
>>> This property is already present in the Raspian version of Linux, but the
>>> upstream driver implementaion that will follow adds more details and
>>
>> typo, implementation
>>
>>> discerns between (a) and (b).
>>>
>>> Regarding "brcm,completion-timeout-us"
>>>
>>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>>> PCIe transaction completion abort timeout. We've been asked to make this
>>> configurable, so we are introducing "brcm,completion-timeout-us".
>>>
>>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>>
>> What happened here? Where is the changelog?
>
> It is in the cover letter:
>
> https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
>
> but it does not look like the cover letter was copied to you or Rob.
As you said, I did not get it.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 11:56 ` Krzysztof Kozlowski
0 siblings, 0 replies; 57+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-12 11:56 UTC (permalink / raw)
To: Florian Fainelli, Jim Quinlan, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 12/04/2023 13:49, Florian Fainelli wrote:
>
>
> On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
>> On 11/04/2023 18:59, Jim Quinlan wrote:
>>> Regarding "brcm,enable-l1ss":
>>>
>>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>>> requires the driver probe() to deliberately place the HW one of three
>>> CLKREQ# modes:
>>>
>>> (a) CLKREQ# driven by the RC unconditionally
>>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>>
>>> The HW+driver can tell the difference between downstream devices that
>>> need (a) and (b), but does not know when to configure (c). Further, the
>>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>>> that (c) is desired. Setting this property only makes sense when the
>>> downstream device is L1SS-capable and the OS is configured to activate
>>> this mode (e.g. policy==superpowersave).
>>>
>>> This property is already present in the Raspian version of Linux, but the
>>> upstream driver implementaion that will follow adds more details and
>>
>> typo, implementation
>>
>>> discerns between (a) and (b).
>>>
>>> Regarding "brcm,completion-timeout-us"
>>>
>>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>>> PCIe transaction completion abort timeout. We've been asked to make this
>>> configurable, so we are introducing "brcm,completion-timeout-us".
>>>
>>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>>
>> What happened here? Where is the changelog?
>
> It is in the cover letter:
>
> https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
>
> but it does not look like the cover letter was copied to you or Rob.
As you said, I did not get it.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 11:56 ` Krzysztof Kozlowski
@ 2023-04-12 14:14 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-12 14:14 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 12/04/2023 13:49, Florian Fainelli wrote:
> >
> >
> > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> >> On 11/04/2023 18:59, Jim Quinlan wrote:
> >>> Regarding "brcm,enable-l1ss":
> >>>
> >>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> >>> requires the driver probe() to deliberately place the HW one of three
> >>> CLKREQ# modes:
> >>>
> >>> (a) CLKREQ# driven by the RC unconditionally
> >>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> >>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> >>>
> >>> The HW+driver can tell the difference between downstream devices that
> >>> need (a) and (b), but does not know when to configure (c). Further, the
> >>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> >>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> >>> that (c) is desired. Setting this property only makes sense when the
> >>> downstream device is L1SS-capable and the OS is configured to activate
> >>> this mode (e.g. policy==superpowersave).
> >>>
> >>> This property is already present in the Raspian version of Linux, but the
> >>> upstream driver implementaion that will follow adds more details and
> >>
> >> typo, implementation
> >>
> >>> discerns between (a) and (b).
> >>>
> >>> Regarding "brcm,completion-timeout-us"
> >>>
> >>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> >>> PCIe transaction completion abort timeout. We've been asked to make this
> >>> configurable, so we are introducing "brcm,completion-timeout-us".
> >>>
> >>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> >>
> >> What happened here? Where is the changelog?
> >
> > It is in the cover letter:
> >
> > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> >
> > but it does not look like the cover letter was copied to you or Rob.
>
> As you said, I did not get it.
Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
I need to modify one or both scripts to send the cover to the
superset of recipients in the constituent commits.
Regards,
Jim Quinan
Broadcom STB
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 14:14 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-12 14:14 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 12/04/2023 13:49, Florian Fainelli wrote:
> >
> >
> > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> >> On 11/04/2023 18:59, Jim Quinlan wrote:
> >>> Regarding "brcm,enable-l1ss":
> >>>
> >>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> >>> requires the driver probe() to deliberately place the HW one of three
> >>> CLKREQ# modes:
> >>>
> >>> (a) CLKREQ# driven by the RC unconditionally
> >>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> >>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> >>>
> >>> The HW+driver can tell the difference between downstream devices that
> >>> need (a) and (b), but does not know when to configure (c). Further, the
> >>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> >>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> >>> that (c) is desired. Setting this property only makes sense when the
> >>> downstream device is L1SS-capable and the OS is configured to activate
> >>> this mode (e.g. policy==superpowersave).
> >>>
> >>> This property is already present in the Raspian version of Linux, but the
> >>> upstream driver implementaion that will follow adds more details and
> >>
> >> typo, implementation
> >>
> >>> discerns between (a) and (b).
> >>>
> >>> Regarding "brcm,completion-timeout-us"
> >>>
> >>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> >>> PCIe transaction completion abort timeout. We've been asked to make this
> >>> configurable, so we are introducing "brcm,completion-timeout-us".
> >>>
> >>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> >>
> >> What happened here? Where is the changelog?
> >
> > It is in the cover letter:
> >
> > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> >
> > but it does not look like the cover letter was copied to you or Rob.
>
> As you said, I did not get it.
Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
I need to modify one or both scripts to send the cover to the
superset of recipients in the constituent commits.
Regards,
Jim Quinan
Broadcom STB
>
> Best regards,
> Krzysztof
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 14:14 ` Jim Quinlan
@ 2023-04-12 15:37 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2023-04-12 15:37 UTC (permalink / raw)
To: Jim Quinlan
Cc: Krzysztof Kozlowski, Florian Fainelli, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
> On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
> >
> > On 12/04/2023 13:49, Florian Fainelli wrote:
> > >
> > >
> > > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> > >> On 11/04/2023 18:59, Jim Quinlan wrote:
> > >>> Regarding "brcm,enable-l1ss":
> > >>>
> > >>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> > >>> requires the driver probe() to deliberately place the HW one of three
> > >>> CLKREQ# modes:
> > >>>
> > >>> (a) CLKREQ# driven by the RC unconditionally
> > >>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> > >>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> > >>>
> > >>> The HW+driver can tell the difference between downstream devices that
> > >>> need (a) and (b), but does not know when to configure (c). Further, the
> > >>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> > >>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> > >>> that (c) is desired. Setting this property only makes sense when the
> > >>> downstream device is L1SS-capable and the OS is configured to activate
> > >>> this mode (e.g. policy==superpowersave).
> > >>>
> > >>> This property is already present in the Raspian version of Linux, but the
> > >>> upstream driver implementaion that will follow adds more details and
> > >>
> > >> typo, implementation
> > >>
> > >>> discerns between (a) and (b).
> > >>>
> > >>> Regarding "brcm,completion-timeout-us"
> > >>>
> > >>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> > >>> PCIe transaction completion abort timeout. We've been asked to make this
> > >>> configurable, so we are introducing "brcm,completion-timeout-us".
> > >>>
> > >>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> > >>
> > >> What happened here? Where is the changelog?
> > >
> > > It is in the cover letter:
> > >
> > > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> > >
> > > but it does not look like the cover letter was copied to you or Rob.
> >
> > As you said, I did not get it.
>
> Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
> I need to modify one or both scripts to send the cover to the
> superset of recipients in the constituent commits.
Try out 'b4'. It's much easier.
In any case, I don't read cover letters. Changes to a patch belong with
the patch.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 15:37 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2023-04-12 15:37 UTC (permalink / raw)
To: Jim Quinlan
Cc: Krzysztof Kozlowski, Florian Fainelli, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
> On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
> >
> > On 12/04/2023 13:49, Florian Fainelli wrote:
> > >
> > >
> > > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> > >> On 11/04/2023 18:59, Jim Quinlan wrote:
> > >>> Regarding "brcm,enable-l1ss":
> > >>>
> > >>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> > >>> requires the driver probe() to deliberately place the HW one of three
> > >>> CLKREQ# modes:
> > >>>
> > >>> (a) CLKREQ# driven by the RC unconditionally
> > >>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> > >>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> > >>>
> > >>> The HW+driver can tell the difference between downstream devices that
> > >>> need (a) and (b), but does not know when to configure (c). Further, the
> > >>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> > >>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> > >>> that (c) is desired. Setting this property only makes sense when the
> > >>> downstream device is L1SS-capable and the OS is configured to activate
> > >>> this mode (e.g. policy==superpowersave).
> > >>>
> > >>> This property is already present in the Raspian version of Linux, but the
> > >>> upstream driver implementaion that will follow adds more details and
> > >>
> > >> typo, implementation
> > >>
> > >>> discerns between (a) and (b).
> > >>>
> > >>> Regarding "brcm,completion-timeout-us"
> > >>>
> > >>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> > >>> PCIe transaction completion abort timeout. We've been asked to make this
> > >>> configurable, so we are introducing "brcm,completion-timeout-us".
> > >>>
> > >>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> > >>
> > >> What happened here? Where is the changelog?
> > >
> > > It is in the cover letter:
> > >
> > > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> > >
> > > but it does not look like the cover letter was copied to you or Rob.
> >
> > As you said, I did not get it.
>
> Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
> I need to modify one or both scripts to send the cover to the
> superset of recipients in the constituent commits.
Try out 'b4'. It's much easier.
In any case, I don't read cover letters. Changes to a patch belong with
the patch.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 15:37 ` Rob Herring
@ 2023-04-12 16:12 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-12 16:12 UTC (permalink / raw)
To: Rob Herring, Jim Quinlan
Cc: Krzysztof Kozlowski, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 4/12/23 08:37, Rob Herring wrote:
> On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
>> On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
>> <krzysztof.kozlowski@linaro.org> wrote:
>>>
>>> On 12/04/2023 13:49, Florian Fainelli wrote:
>>>>
>>>>
>>>> On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
>>>>> On 11/04/2023 18:59, Jim Quinlan wrote:
>>>>>> Regarding "brcm,enable-l1ss":
>>>>>>
>>>>>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>>>>>> requires the driver probe() to deliberately place the HW one of three
>>>>>> CLKREQ# modes:
>>>>>>
>>>>>> (a) CLKREQ# driven by the RC unconditionally
>>>>>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>>>>>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>>>>>
>>>>>> The HW+driver can tell the difference between downstream devices that
>>>>>> need (a) and (b), but does not know when to configure (c). Further, the
>>>>>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>>>>>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>>>>>> that (c) is desired. Setting this property only makes sense when the
>>>>>> downstream device is L1SS-capable and the OS is configured to activate
>>>>>> this mode (e.g. policy==superpowersave).
>>>>>>
>>>>>> This property is already present in the Raspian version of Linux, but the
>>>>>> upstream driver implementaion that will follow adds more details and
>>>>>
>>>>> typo, implementation
>>>>>
>>>>>> discerns between (a) and (b).
>>>>>>
>>>>>> Regarding "brcm,completion-timeout-us"
>>>>>>
>>>>>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>>>>>> PCIe transaction completion abort timeout. We've been asked to make this
>>>>>> configurable, so we are introducing "brcm,completion-timeout-us".
>>>>>>
>>>>>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>>>>>
>>>>> What happened here? Where is the changelog?
>>>>
>>>> It is in the cover letter:
>>>>
>>>> https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
>>>>
>>>> but it does not look like the cover letter was copied to you or Rob.
>>>
>>> As you said, I did not get it.
>>
>> Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
>> I need to modify one or both scripts to send the cover to the
>> superset of recipients in the constituent commits.
>
> Try out 'b4'. It's much easier.
>
> In any case, I don't read cover letters. Changes to a patch belong with
> the patch.
This is not what most other maintainers do, and there does not appear to
be a general consensus amongst maintainers that the changes belong in
the individual patches, or in the cover letter. Some trees like the
networking tree do merge commits of patch sets where the cover letter is
used as part of the merge commit message. Other maintainers don't, and
some want the change log after the '---' and some do not.
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-12 16:12 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-12 16:12 UTC (permalink / raw)
To: Rob Herring, Jim Quinlan
Cc: Krzysztof Kozlowski, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On 4/12/23 08:37, Rob Herring wrote:
> On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
>> On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
>> <krzysztof.kozlowski@linaro.org> wrote:
>>>
>>> On 12/04/2023 13:49, Florian Fainelli wrote:
>>>>
>>>>
>>>> On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
>>>>> On 11/04/2023 18:59, Jim Quinlan wrote:
>>>>>> Regarding "brcm,enable-l1ss":
>>>>>>
>>>>>> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>>>>>> requires the driver probe() to deliberately place the HW one of three
>>>>>> CLKREQ# modes:
>>>>>>
>>>>>> (a) CLKREQ# driven by the RC unconditionally
>>>>>> (b) CLKREQ# driven by the EP for ASPM L0s, L1
>>>>>> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>>>>>>
>>>>>> The HW+driver can tell the difference between downstream devices that
>>>>>> need (a) and (b), but does not know when to configure (c). Further, the
>>>>>> HW may cause a CPU abort on boot if guesses wrong regarding the need for
>>>>>> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
>>>>>> that (c) is desired. Setting this property only makes sense when the
>>>>>> downstream device is L1SS-capable and the OS is configured to activate
>>>>>> this mode (e.g. policy==superpowersave).
>>>>>>
>>>>>> This property is already present in the Raspian version of Linux, but the
>>>>>> upstream driver implementaion that will follow adds more details and
>>>>>
>>>>> typo, implementation
>>>>>
>>>>>> discerns between (a) and (b).
>>>>>>
>>>>>> Regarding "brcm,completion-timeout-us"
>>>>>>
>>>>>> Our HW will cause a CPU abort if the L1SS exit time is longer than the
>>>>>> PCIe transaction completion abort timeout. We've been asked to make this
>>>>>> configurable, so we are introducing "brcm,completion-timeout-us".
>>>>>>
>>>>>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>>>>>
>>>>> What happened here? Where is the changelog?
>>>>
>>>> It is in the cover letter:
>>>>
>>>> https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
>>>>
>>>> but it does not look like the cover letter was copied to you or Rob.
>>>
>>> As you said, I did not get it.
>>
>> Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
>> I need to modify one or both scripts to send the cover to the
>> superset of recipients in the constituent commits.
>
> Try out 'b4'. It's much easier.
>
> In any case, I don't read cover letters. Changes to a patch belong with
> the patch.
This is not what most other maintainers do, and there does not appear to
be a general consensus amongst maintainers that the changes belong in
the individual patches, or in the cover letter. Some trees like the
networking tree do merge commits of patch sets where the cover letter is
used as part of the merge commit message. Other maintainers don't, and
some want the change log after the '---' and some do not.
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-13 14:39 ` Cyril Brulebois
-1 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-13 14:39 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1: Type: text/plain, Size: 3517 bytes --]
Hi Jim,
Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> […]
> This property has already been in use by Raspian Linux, but this
> immplementation adds more details and discerns between (a) and (b)
^^^^^^^^^^^^^^^
implementation
> automatically.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Sorry, it seems like my initial tests with v1 (applied on top of
v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
- same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
- the kernel panic is indeed gone;
- a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
isn't seen by the kernel;
- a USB memory stick connected on the same adapter isn't seen by the
kernel either;
- of course both USB devices are confirmed to work fine if they're
plugged directly on the CM4's USB ports.
Logs with v2:
root@cm4:~# dmesg|grep -i pci
[ 0.610997] PCI: CLS 0 bytes, default 64
[ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
[ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
Please let me know what I can do to help.
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-13 14:39 ` Cyril Brulebois
0 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-13 14:39 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1: Type: text/plain, Size: 3517 bytes --]
Hi Jim,
Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> […]
> This property has already been in use by Raspian Linux, but this
> immplementation adds more details and discerns between (a) and (b)
^^^^^^^^^^^^^^^
implementation
> automatically.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Sorry, it seems like my initial tests with v1 (applied on top of
v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
- same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
- the kernel panic is indeed gone;
- a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
isn't seen by the kernel;
- a USB memory stick connected on the same adapter isn't seen by the
kernel either;
- of course both USB devices are confirmed to work fine if they're
plugged directly on the CM4's USB ports.
Logs with v2:
root@cm4:~# dmesg|grep -i pci
[ 0.610997] PCI: CLS 0 bytes, default 64
[ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
[ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
Please let me know what I can do to help.
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-13 14:39 ` Cyril Brulebois
@ 2023-04-13 14:57 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-13 14:57 UTC (permalink / raw)
To: Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
Hello Cyril,
Can you provide (a) the full boot log prior to applying the patch
series and (b) full boot log after applying the series, using an
IDENTICAL setup.
If it fails on both then it has little to do with my patch series.
In my last series your testing somehow conflated the effect of an
unrelated MMC interrupt issue so please be precise.
Regards,
Jim Quinlan
Broadcom STB
On Thu, Apr 13, 2023 at 10:39 AM Cyril Brulebois <kibi@debian.org> wrote:
>
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> > […]
> > This property has already been in use by Raspian Linux, but this
> > immplementation adds more details and discerns between (a) and (b)
> ^^^^^^^^^^^^^^^
> implementation
>
> > automatically.
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
> > Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> Sorry, it seems like my initial tests with v1 (applied on top of
> v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
> same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
> - same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
> - the kernel panic is indeed gone;
> - a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
> isn't seen by the kernel;
> - a USB memory stick connected on the same adapter isn't seen by the
> kernel either;
> - of course both USB devices are confirmed to work fine if they're
> plugged directly on the CM4's USB ports.
>
> Logs with v2:
>
> root@cm4:~# dmesg|grep -i pci
> [ 0.610997] PCI: CLS 0 bytes, default 64
> [ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
> [ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
> [ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
> [ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
> [ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
> [ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
> [ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
> [ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
> [ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
> [ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
> [ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
> [ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
> [ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
> [ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
> [ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
> [ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
> [ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
> [ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
> [ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
> [ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
> [ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
>
> Please let me know what I can do to help.
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-13 14:57 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-13 14:57 UTC (permalink / raw)
To: Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
Hello Cyril,
Can you provide (a) the full boot log prior to applying the patch
series and (b) full boot log after applying the series, using an
IDENTICAL setup.
If it fails on both then it has little to do with my patch series.
In my last series your testing somehow conflated the effect of an
unrelated MMC interrupt issue so please be precise.
Regards,
Jim Quinlan
Broadcom STB
On Thu, Apr 13, 2023 at 10:39 AM Cyril Brulebois <kibi@debian.org> wrote:
>
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
> > […]
> > This property has already been in use by Raspian Linux, but this
> > immplementation adds more details and discerns between (a) and (b)
> ^^^^^^^^^^^^^^^
> implementation
>
> > automatically.
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
> > Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> Sorry, it seems like my initial tests with v1 (applied on top of
> v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
> same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
> - same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
> - the kernel panic is indeed gone;
> - a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
> isn't seen by the kernel;
> - a USB memory stick connected on the same adapter isn't seen by the
> kernel either;
> - of course both USB devices are confirmed to work fine if they're
> plugged directly on the CM4's USB ports.
>
> Logs with v2:
>
> root@cm4:~# dmesg|grep -i pci
> [ 0.610997] PCI: CLS 0 bytes, default 64
> [ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
> [ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
> [ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
> [ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
> [ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
> [ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
> [ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
> [ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
> [ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
> [ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
> [ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
> [ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
> [ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
> [ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
> [ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
> [ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
> [ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
> [ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
> [ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
> [ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
> [ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
>
> Please let me know what I can do to help.
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-13 14:39 ` Cyril Brulebois
@ 2023-04-13 14:58 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-13 14:58 UTC (permalink / raw)
To: Cyril Brulebois, Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/13/2023 7:39 AM, Cyril Brulebois wrote:
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
>> […]
>> This property has already been in use by Raspian Linux, but this
>> immplementation adds more details and discerns between (a) and (b)
> ^^^^^^^^^^^^^^^
> implementation
>
>> automatically.
>>
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> Sorry, it seems like my initial tests with v1 (applied on top of
> v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
> same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
> - same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
> - the kernel panic is indeed gone;
> - a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
> isn't seen by the kernel;
> - a USB memory stick connected on the same adapter isn't seen by the
> kernel either;
> - of course both USB devices are confirmed to work fine if they're
> plugged directly on the CM4's USB ports.
>
> Logs with v2:
>
> root@cm4:~# dmesg|grep -i pci
> [ 0.610997] PCI: CLS 0 bytes, default 64
> [ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
> [ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
> [ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
> [ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
> [ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
> [ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
> [ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
> [ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
> [ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
> [ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
> [ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
> [ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
> [ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
> [ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
> [ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
> [ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
> [ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
> [ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
> [ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
> [ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
> [ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
>
> Please let me know what I can do to help.
Could you please attach your .config so we can check a few things?
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-13 14:58 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-13 14:58 UTC (permalink / raw)
To: Cyril Brulebois, Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/13/2023 7:39 AM, Cyril Brulebois wrote:
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-11):
>> […]
>> This property has already been in use by Raspian Linux, but this
>> immplementation adds more details and discerns between (a) and (b)
> ^^^^^^^^^^^^^^^
> implementation
>
>> automatically.
>>
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217276
>> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
>
> Sorry, it seems like my initial tests with v1 (applied on top of
> v6.3-rc5-137-gf2afccfefe7b) weren't thorough enough, and I'm seeing the
> same problems with v2 (applied on top of v6.3-rc6-46-gde4664485abb):
> - same setup as in https://bugzilla.kernel.org/show_bug.cgi?id=217276
> - the kernel panic is indeed gone;
> - a USB keyboard connected on that SupaHub PCIe-to-multiple-USB adapter
> isn't seen by the kernel;
> - a USB memory stick connected on the same adapter isn't seen by the
> kernel either;
> - of course both USB devices are confirmed to work fine if they're
> plugged directly on the CM4's USB ports.
>
> Logs with v2:
>
> root@cm4:~# dmesg|grep -i pci
> [ 0.610997] PCI: CLS 0 bytes, default 64
> [ 1.664886] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 1.672083] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
> [ 1.679125] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
> [ 1.688279] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
> [ 1.696463] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
> [ 1.705282] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
> [ 1.711629] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.717172] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
> [ 1.727653] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
> [ 1.733768] pci 0000:00:00.0: PME# supported from D0 D3hot
> [ 1.740235] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 1.855826] brcm-pcie fd500000.pcie: CLKREQ# ignored; no ASPM
> [ 1.863666] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
> [ 1.870115] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
> [ 1.876205] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
> [ 1.883177] pci 0000:01:00.0: PME# supported from D0 D3hot
> [ 1.888881] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 1.895581] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
> [ 1.902707] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
> [ 1.910279] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 1.915293] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
> [ 1.922412] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
> [ 1.928633] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
> [ 1.934609] pcieport 0000:00:00.0: AER: enabled with IRQ 23
> [ 1.940340] pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 6.946090] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
> [ 6.954026] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896180 usecs
>
> Please let me know what I can do to help.
Could you please attach your .config so we can check a few things?
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-13 18:40 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-13 18:40 UTC (permalink / raw)
To: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
Rob Herring
On 4/11/23 09:59, Jim Quinlan wrote:
> v2 -- Changed binding property 'brcm,completion-timeout-msec' to
> 'brcm,completion-timeout-us'. (StefanW for standard suffix).
> -- Warn when clamping timeout value, and include clamped
> region in message. Also add min and max in YAML. (StefanW)
> -- Qualify description of "brcm,completion-timeout-us" so that
> it refers to PCIe transactions. (StefanW)
> -- Remvove mention of Linux specifics in binding description. (StefanW)
> -- s/clkreq#/CLKREQ#/g (Bjorn)
> -- Refactor completion-timeout-us code to compare max and min to
> value given by the property (as opposed to the computed value).
>
> v1 -- The current driver assumes the downstream devices can
> provide CLKREQ# for ASPM. These commits accomodate devices
> w/ or w/o clkreq# and also handle L1SS-capable devices.
>
> -- The Raspian Linux folks have already been using a PCIe RC
> property "brcm,enable-l1ss". These commits use the same
> property, in a backward-compatible manner, and the implementaion
> adds more detail and also automatically identifies devices w/o
> a clkreq# signal, i.e. most devices plugged into an RPi CM4
> IO board.
>
> Jim Quinlan (3):
> PCI: brcmstb: CLKREQ# accomodations of downstream device
> PCI: brcmstb: Set PCIe transaction completion timeout
> blah blah
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
On a 7216 system test with:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
and on the CM4 I/O board with:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43224
802.11a/b/g/n (rev 01)
01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9125 PCIe
SATA 6.0 Gb/s controller (rev 11) (prog-if 01 [AHCI 1.0])
01:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme
BCM5751 Gigabit Ethernet PCI Express (rev 21)
01:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI
Express-to-PCI Bridge (rev aa)
02:00.0 Multiport serial controller: Pepperl+Fuchs RocketPort EXPRESS
8-port w/Octa Cable
01:00.0 Ethernet controller: Qualcomm Atheros AR5008 Wireless Network
Adapter (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4311
802.11a/b/g (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4322
802.11a/b/g/n Wireless LAN Controller (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602
802.11ac Wireless LAN SoC (rev 01)
and finally with a 4 port switch:
-[0000:00]---00.0-[01-07]----00.0-[02-07]--+-01.0-[03]----00.0 Intel
Corporation 82574L Gigabit Network Connection
+-03.0-[04-05]----00.0-[05]----00.0 Pepperl+Fuchs RocketPort EXPRESS
8-port w/Octa Cable
+-05.0-[06]----00.0
Broadcom Inc. and subsidiaries NetXtreme BCM5751 Gigabit Ethernet PCI
Express
\-07.0-[07]----00.0 Intel
Corporation 82574L Gigabit Network Connection
And than I ran out of devices that I could plug, the others were x4, x8
or x16.
Most (all?) would previously fail, so definitively an improvement!
Thanks!
--
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-13 18:40 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-13 18:40 UTC (permalink / raw)
To: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
Rob Herring
On 4/11/23 09:59, Jim Quinlan wrote:
> v2 -- Changed binding property 'brcm,completion-timeout-msec' to
> 'brcm,completion-timeout-us'. (StefanW for standard suffix).
> -- Warn when clamping timeout value, and include clamped
> region in message. Also add min and max in YAML. (StefanW)
> -- Qualify description of "brcm,completion-timeout-us" so that
> it refers to PCIe transactions. (StefanW)
> -- Remvove mention of Linux specifics in binding description. (StefanW)
> -- s/clkreq#/CLKREQ#/g (Bjorn)
> -- Refactor completion-timeout-us code to compare max and min to
> value given by the property (as opposed to the computed value).
>
> v1 -- The current driver assumes the downstream devices can
> provide CLKREQ# for ASPM. These commits accomodate devices
> w/ or w/o clkreq# and also handle L1SS-capable devices.
>
> -- The Raspian Linux folks have already been using a PCIe RC
> property "brcm,enable-l1ss". These commits use the same
> property, in a backward-compatible manner, and the implementaion
> adds more detail and also automatically identifies devices w/o
> a clkreq# signal, i.e. most devices plugged into an RPi CM4
> IO board.
>
> Jim Quinlan (3):
> PCI: brcmstb: CLKREQ# accomodations of downstream device
> PCI: brcmstb: Set PCIe transaction completion timeout
> blah blah
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
On a 7216 system test with:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
and on the CM4 I/O board with:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43224
802.11a/b/g/n (rev 01)
01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9125 PCIe
SATA 6.0 Gb/s controller (rev 11) (prog-if 01 [AHCI 1.0])
01:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme
BCM5751 Gigabit Ethernet PCI Express (rev 21)
01:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI
Express-to-PCI Bridge (rev aa)
02:00.0 Multiport serial controller: Pepperl+Fuchs RocketPort EXPRESS
8-port w/Octa Cable
01:00.0 Ethernet controller: Qualcomm Atheros AR5008 Wireless Network
Adapter (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4311
802.11a/b/g (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4322
802.11a/b/g/n Wireless LAN Controller (rev 01)
01:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602
802.11ac Wireless LAN SoC (rev 01)
and finally with a 4 port switch:
-[0000:00]---00.0-[01-07]----00.0-[02-07]--+-01.0-[03]----00.0 Intel
Corporation 82574L Gigabit Network Connection
+-03.0-[04-05]----00.0-[05]----00.0 Pepperl+Fuchs RocketPort EXPRESS
8-port w/Octa Cable
+-05.0-[06]----00.0
Broadcom Inc. and subsidiaries NetXtreme BCM5751 Gigabit Ethernet PCI
Express
\-07.0-[07]----00.0 Intel
Corporation 82574L Gigabit Network Connection
And than I ran out of devices that I could plug, the others were x4, x8
or x16.
Most (all?) would previously fail, so definitively an improvement!
Thanks!
--
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-13 14:57 ` Jim Quinlan
(?)
@ 2023-04-13 20:06 ` Cyril Brulebois
2023-04-14 12:14 ` Jim Quinlan
-1 siblings, 1 reply; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-13 20:06 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1: Type: text/plain, Size: 4135 bytes --]
Hi Jim,
Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
> Can you provide (a) the full boot log prior to applying the patch
> series and (b) full boot log after applying the series, using an
> IDENTICAL setup. If it fails on both then it has little to do with my
> patch series.
Just to be clear, the issue I reported was with:
- Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
This was my minimal reproducer for the kernel panic at boot-up, which
goes away with either v1 or v2. When I realized I didn't actually check
whether the SupaHub board was working correctly, I plugged 2 devices to
obtain this setup:
- Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
- Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
- Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
It turns out that this particular revision of the SupaHub board isn't
supported by xhci_hcd directly (failing to probe with error -110) and
one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
updated kernel config, I'm able to use the keyboard and to read data
from the memory stick without problems (70 MB/s).
> In my last series your testing somehow conflated the effect of an
> unrelated MMC interrupt issue so please be precise.
I wish things would be simpler and didn't involve combinatorics, let
alone other bugs/regressions at times, but I'm really trying my best to
navigate and report issues and test patches when I can spare some time…
In my defence, the very similar board PCE6U1C-R02, VER 006 boots without
a kernel panic, and works fine with xhci_hcd without that extra module
and its firmware. It's based on the exact same chip (Renesas Technology
Corp. uPD720201) though, that's why I didn't realize the need for an
extra module until now for the PCE6U1C-R02, VER 006S one. (Florian,
thanks for mentioning .config earlier…)
To sum up, it seems both (sub)versions of that SupaHub PCE6U1C-R02 board
are usable with this patch series: the kernel panic at boot-up is gone,
and USB devices plugged into those boards are working as expected.
But, speaking of combinatorics, while the patch series helps fix
https://bugzilla.kernel.org/show_bug.cgi?id=217276 on that particular
initial combination of CM4 and SupaHub PCE6U1C-R02, VER 006S, it also
generates a regression if I use a different CM4…
Setup:
- Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
You'll find attached (a) and (b) as requested above, for this setup, as
well as the kernel configuration file:
- (a) = dmesg-unpatched.txt = boots fine (and USB devices work fine if
memory sticks or keyboards are plugged in).
- (b) = dmesg-patched.txt = kernel panic.
- cm4+pcie.config
I'm getting similar results with the other SupaHub board:
- Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006
This is probably best summarized this way:
| unpatched | patched
------------------------------+--------------+--------------
CM4 Rev 1.1 4G/32G + VER 006 | OK | OK
CM4 Rev 1.1 4G/32G + VER 006S | Kernel panic | OK ← Bugzilla entry
CM4 Rev 1.0 8G/32G + VER 006 | OK | Kernel panic
CM4 Rev 1.0 8G/32G + VER 006S | OK | Kernel panic
(And I'm of course using the same settings regarding the serial console,
to get traces when needed.)
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.2: dmesg-unpatched.txt --]
[-- Type: text/plain, Size: 31143 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.3.0-rc6+ (kibi@genova) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 13 18:40:14 CEST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef625a0..0x000000003ef626d0 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff00c280-0x1ff00efff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s88232 r8192 d30552 u126976
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03140 bcm2709.serial=0x751d0632 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3987300K/8245248K available (13440K kernel code, 2774K rwdata, 8252K rodata, 6528K init, 607K bss, 290288K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43928 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008296] Console: colour dummy device 80x25
[ 0.012834] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.023386] pid_max: default: 32768 minimum: 301
[ 0.028109] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor,tomoyo,bpf
[ 0.037100] landlock: Up and running.
[ 0.040791] Yama: becoming mindful.
[ 0.044398] AppArmor: AppArmor initialized
[ 0.048537] TOMOYO Linux initialized
[ 0.052159] LSM support for eBPF active
[ 0.056124] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063821] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073128] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.080450] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.086657] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.092944] rcu: Hierarchical SRCU implementation.
[ 0.097783] rcu: Max phase no-delay instances is 1000.
[ 0.104129] EFI services will not be available.
[ 0.109039] smp: Bringing up secondary CPUs ...
[ 0.113989] Detected PIPT I-cache on CPU1
[ 0.114056] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.114425] Detected PIPT I-cache on CPU2
[ 0.114460] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.114822] Detected PIPT I-cache on CPU3
[ 0.114857] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.114899] smp: Brought up 1 node, 4 CPUs
[ 0.150941] SMP: Total of 4 processors activated.
[ 0.155690] CPU features: detected: 32-bit EL0 Support
[ 0.160875] CPU features: detected: 32-bit EL1 Support
[ 0.166063] CPU features: detected: CRC32 instructions
[ 0.171304] CPU: All CPU(s) started at EL2
[ 0.175447] alternatives: applying system-wide alternatives
[ 0.258713] node 0 deferred pages initialised in 76ms
[ 0.265166] devtmpfs: initialized
[ 0.273843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.283744] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.292056] pinctrl core: initialized pinctrl subsystem
[ 0.298214] DMI not present or invalid.
[ 0.302436] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.309752] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.317441] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.326299] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.334427] audit: initializing netlink subsys (disabled)
[ 0.340014] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[ 0.340563] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347846] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.353999] thermal_sys: Registered thermal governor 'step_wise'
[ 0.360064] thermal_sys: Registered thermal governor 'user_space'
[ 0.366128] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.372308] cpuidle: using governor ladder
[ 0.383041] cpuidle: using governor menu
[ 0.387114] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.394027] ASID allocator initialised with 32768 entries
[ 0.399724] Serial: AMBA PL011 UART driver
[ 0.410886] KASLR enabled
[ 0.414262] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.421128] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.427459] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.434314] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.440643] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.447497] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.453828] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.460683] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.468063] ACPI: Interpreter disabled.
[ 0.472185] iommu: Default domain type: Translated
[ 0.477113] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.483600] EDAC MC: Ver: 3.0.0
[ 0.487030] scmi_core: SCMI protocol bus registered
[ 0.492531] NetLabel: Initializing
[ 0.495970] NetLabel: domain hash size = 128
[ 0.500366] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.506112] NetLabel: unlabeled traffic allowed by default
[ 0.511877] vgaarb: loaded
[ 0.514841] clocksource: Switched to clocksource arch_sys_counter
[ 0.521368] VFS: Disk quotas dquot_6.6.0
[ 0.525459] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.533103] AppArmor: AppArmor Filesystem Enabled
[ 0.538015] pnp: PnP ACPI: disabled
[ 0.546316] NET: Registered PF_INET protocol family
[ 0.551792] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.563330] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.572121] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.580159] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.589121] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.599250] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.606248] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.614185] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.621143] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.628606] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.634353] NET: Registered PF_XDP protocol family
[ 0.639203] PCI: CLS 0 bytes, default 64
[ 0.643502] Trying to unpack rootfs image as initramfs...
[ 0.648999] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.657511] kvm [1]: IPA Size Limit: 44 bits
[ 0.662830] kvm [1]: vgic interrupt IRQ9
[ 0.666873] kvm [1]: Hyp mode initialized successfully
[ 0.673274] Initialise system trusted keyrings
[ 0.677858] Key type blacklist registered
[ 0.682209] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.688901] zbud: loaded
[ 0.692202] integrity: Platform Keyring initialized
[ 0.697192] integrity: Machine keyring initialized
[ 0.702059] Key type asymmetric registered
[ 0.706207] Asymmetric key parser 'x509' registered
[ 1.649299] Freeing initrd memory: 31880K
[ 1.667208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.674789] io scheduler mq-deadline registered
[ 1.681426] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 1.694434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.701617] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.708659] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.717813] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.725997] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.734808] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.741151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.746696] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.757174] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.763287] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.769749] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.202843] brcm-pcie fd500000.pcie: link down
[ 2.207370] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.214064] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.219232] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 2.225236] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 2.231086] pci_bus 0000:01: busn_res: [bus 01] is released
[ 2.236834] pci_bus 0000:00: busn_res: [bus 00-ff] is released
[ 2.243394] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes
[ 2.252100] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 2.264933] Console: switching to colour frame buffer device 228x61
[ 2.274317] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered!
[ 2.286800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.294089] printk: console [ttyS1] disabled
[ 2.298462] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62499999) is a 16550
[ 2.307459] printk: console [ttyS1] enabled
[ 2.315940] printk: bootconsole [bcm2835aux0] disabled
[ 2.326869] Serial: AMBA driver
[ 2.330225] msm_serial: driver initialized
[ 2.335641] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.343442] mousedev: PS/2 mouse device common for all mice
[ 2.349643] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 2.356735] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 2.364445] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.371087] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 2.395087] NET: Registered PF_INET6 protocol family
[ 2.412482] Segment Routing with IPv6
[ 2.416257] In-situ OAM (IOAM) with IPv6
[ 2.420280] mip6: Mobile IPv6
[ 2.423296] NET: Registered PF_PACKET protocol family
[ 2.428479] mpls_gso: MPLS GSO support
[ 2.435400] registered taskstats version 1
[ 2.439785] Loading compiled-in X.509 certificates
[ 2.482561] Loaded X.509 cert 'Build time autogenerated kernel key: 90507e4035e992aa31708f34e483056906739410'
[ 2.494227] zswap: loaded using pool lzo/zbud
[ 2.502434] Key type .fscrypt registered
[ 2.506426] Key type fscrypt-provisioning registered
[ 2.523429] Key type encrypted registered
[ 2.527514] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.533103] ima: No TPM chip found, activating TPM-bypass!
[ 2.538675] ima: Allocated hash algorithm: sha256
[ 2.543467] ima: No architecture policies found
[ 2.548105] evm: Initialising EVM extended attributes:
[ 2.553313] evm: security.selinux
[ 2.556669] evm: security.SMACK64 (disabled)
[ 2.560994] evm: security.SMACK64EXEC (disabled)
[ 2.565671] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.570789] evm: security.SMACK64MMAP (disabled)
[ 2.575465] evm: security.apparmor
[ 2.578909] evm: security.ima
[ 2.581908] evm: security.capability
[ 2.585527] evm: HMAC attrs: 0x1
[ 2.794492] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
[ 2.803717] serial serial0: tty port ttyAMA0 registered
[ 2.809687] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16
[ 2.819898] gpio-573 (ant1): hogged as output/high
[ 2.826036] gpio-577 (ant2): hogged as output/low
[ 2.843539] Freeing unused kernel memory: 6528K
[ 2.901335] Checked W+X mappings: passed, no W+X pages found
[ 2.907151] Run /init as init process
[ 2.910882] with arguments:
[ 2.910885] /init
[ 2.910889] with environment:
[ 2.910892] HOME=/
[ 2.910894] TERM=linux
[ 3.178043] sdhci: Secure Digital Host Controller Interface driver
[ 3.184374] sdhci: Copyright(c) Pierre Ossman
[ 3.196568] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 3.208567] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.227917] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[ 3.266880] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[ 3.274014] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 3.298373] usbcore: registered new interface driver usbfs
[ 3.299248] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 3.304112] usbcore: registered new interface driver hub
[ 3.315496] usbcore: registered new device driver usb
[ 3.354549] pps_core: LinuxPPS API ver. 1 registered
[ 3.359612] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.363605] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 3.376438] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 3.376617] PTP clock support registered
[ 3.392714] mmc1: new HS200 MMC card at address 0001
[ 3.398822] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
[ 3.407754] mmcblk1: p1 p2
[ 3.411410] mmcblk1boot0: mmc1:0001 BJTD4R 4.00 MiB
[ 3.419402] mmcblk1boot1: mmc1:0001 BJTD4R 4.00 MiB
[ 3.426511] mmcblk1rpmb: mmc1:0001 BJTD4R 4.00 MiB, chardev (241:0)
[ 3.435090] dwc2 fe980000.usb: DWC OTG Controller
[ 3.439927] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1
[ 3.447123] dwc2 fe980000.usb: irq 38, io mem 0xfe980000
[ 3.452657] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 3.461086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.468434] usb usb1: Product: DWC OTG Controller
[ 3.473224] usb usb1: Manufacturer: Linux 6.3.0-rc6+ dwc2_hsotg
[ 3.479232] usb usb1: SerialNumber: fe980000.usb
[ 3.484332] hub 1-0:1.0: USB hub found
[ 3.488163] hub 1-0:1.0: 1 port detected
[ 3.538934] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 3.700815] EXT4-fs (mmcblk1p2): mounted filesystem 76e585ad-07e2-43e0-aae7-43697734a9c4 with ordered data mode. Quota mode: none.
[ 3.790875] usb 1-1: new high-speed USB device number 2 using dwc2
[ 3.827020] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.003037] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 4.011366] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.019067] hub 1-1:1.0: USB hub found
[ 4.022957] hub 1-1:1.0: 4 ports detected
[ 4.027669] systemd[1]: System time before build time, advancing clock.
[ 4.068155] systemd[1]: Inserted module 'autofs4'
[ 4.115307] systemd[1]: systemd 252.5-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.147826] systemd[1]: Detected architecture arm64.
[ 4.168614] systemd[1]: Hostname set to <rpi4-20230307>.
[ 4.334863] usb 1-1.1: new low-speed USB device number 3 using dwc2
[ 4.444549] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.02
[ 4.453051] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.460473] usb 1-1.1: Product: USB Keyboard
[ 4.464807] usb 1-1.1: Manufacturer: Logitech
[ 4.473021] systemd[1]: Queued start job for default target graphical.target.
[ 4.497267] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 4.523886] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 4.551992] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 4.579830] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 4.607613] systemd[1]: Created slice user.slice - User and Session Slice.
[ 4.631113] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 4.659027] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 4.687362] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 4.718986] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 4.742937] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 4.770931] systemd[1]: Reached target paths.target - Path Units.
[ 4.794929] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 4.818903] systemd[1]: Reached target slices.target - Slice Units.
[ 4.842923] systemd[1]: Reached target swap.target - Swaps.
[ 4.862923] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 4.891320] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 4.919070] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 4.947375] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 4.975253] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.003280] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.027757] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.055187] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.111123] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 5.137574] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.165656] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.193548] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.221962] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.249825] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 5.277939] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 5.306015] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.333990] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 5.352967] fuse: init (API version 7.38)
[ 5.359212] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.407382] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 5.440130] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.470347] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.492592] EXT4-fs (mmcblk1p2): re-mounted 76e585ad-07e2-43e0-aae7-43697734a9c4. Quota mode: none.
[ 5.503219] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.543410] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.575151] systemd[1]: Started systemd-journald.service - Journal Service.
[ 5.957897] systemd-journald[224]: Received client request to flush runtime journal.
[ 5.968061] systemd-journald[224]: File /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.665325] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.717068] iproc-rng200 fe104000.rng: hwrng registered
[ 6.722675] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 6.795874] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0
[ 6.893906] hid: raw HID events driver (C) Jiri Kosina
[ 6.896667] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 6.914482] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.915930] mc: Linux media interface: v0.10
[ 6.938805] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 6.953003] usbcore: registered new interface driver usbhid
[ 6.959270] usbhid: USB HID core driver
[ 7.003088] videodev: Linux video capture interface: v2.00
[ 7.009947] input: Logitech USB Keyboard as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C31C.0001/input/input0
[ 7.039830] Console: switching to colour dummy device 80x25
[ 7.057663] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.079821] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fe980000.usb-1.1/input0
[ 7.080740] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.085161] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 7.093526] Registered IR keymap rc-cec
[ 7.093760] input: Logitech USB Keyboard Consumer Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input2
[ 7.127037] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 7.134374] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1
[ 7.152322] input: Logitech USB Keyboard System Control as /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input3
[ 7.166332] audit: type=1400 audit(1675040631.119:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=353 comm="apparmor_parser"
[ 7.175907] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 7.182578] audit: type=1400 audit(1675040631.135:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=354 comm="apparmor_parser"
[ 7.186457] hid-generic 0003:046D:C31C.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fe980000.usb-1.1/input1
[ 7.220317] audit: type=1400 audit(1675040631.135:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=354 comm="apparmor_parser"
[ 7.239770] Registered IR keymap rc-cec
[ 7.242351] audit: type=1400 audit(1675040631.159:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[ 7.244555] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 7.263209] audit: type=1400 audit(1675040631.159:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=355 comm="apparmor_parser"
[ 7.272165] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input4
[ 7.288115] audit: type=1400 audit(1675040631.159:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[ 7.313548] audit: type=1400 audit(1675040631.159:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=355 comm="apparmor_parser"
[ 7.330871] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 7.339728] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 7.347784] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.355479] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.363131] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.370862] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.380024] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 7.436740] Bluetooth: Core ver 2.22
[ 7.440515] NET: Registered PF_BLUETOOTH protocol family
[ 7.445951] Bluetooth: HCI device and connection manager initialized
[ 7.452502] Bluetooth: HCI socket layer initialized
[ 7.457513] Bluetooth: L2CAP socket layer initialized
[ 7.457538] Bluetooth: SCO socket layer initialized
[ 7.489050] Console: switching to colour frame buffer device 240x67
[ 7.514549] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 7.517620] Bluetooth: HCI UART driver ver 2.3
[ 7.525226] Bluetooth: HCI UART protocol H4 registered
[ 7.530567] Bluetooth: HCI UART protocol LL registered
[ 7.536413] Bluetooth: HCI UART protocol ATH3K registered
[ 7.542677] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.549853] Bluetooth: HCI UART protocol Intel registered
[ 7.556250] Bluetooth: HCI UART protocol Broadcom registered
[ 7.562381] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 7.562442] Bluetooth: HCI UART protocol QCA registered
[ 7.570691] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 7.576593] Bluetooth: HCI UART protocol AG6XX registered
[ 7.591200] Bluetooth: HCI UART protocol Marvell registered
[ 7.634367] systemd-journald[224]: Oldest entry in /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 7.652513] systemd-journald[224]: /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal: Journal header limits reached or header out-of-date, rotating.
[ 7.711023] uart-pl011 fe201000.serial: no DMA platform data
[ 8.419362] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 8.487861] bcmgenet fd580000.ethernet eth0: Link is Down
[ 9.846856] Bluetooth: hci0: command 0xfc18 tx timeout
[ 12.566985] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.575333] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.038905] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[ 18.045724] Bluetooth: hci0: Failed to set baudrate
[ 20.054850] Bluetooth: hci0: command 0x0c03 tx timeout
[ 28.278854] Bluetooth: hci0: BCM: Reset failed (-110)
[ 29.451348] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=484 'systemd'
[-- Attachment #1.3: dmesg-patched.txt --]
[-- Type: text/plain, Size: 15943 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.3.0-rc6+ (kibi@genova) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 13 18:40:14 CEST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef625a0..0x000000003ef626d0 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff00c280-0x1ff00efff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s88232 r8192 d30552 u126976
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03140 bcm2709.serial=0x751d0632 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3987300K/8245248K available (13440K kernel code, 2774K rwdata, 8252K rodata, 6528K init, 607K bss, 290288K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43928 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008296] Console: colour dummy device 80x25
[ 0.012832] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.023384] pid_max: default: 32768 minimum: 301
[ 0.028107] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor,tomoyo,bpf
[ 0.037097] landlock: Up and running.
[ 0.040788] Yama: becoming mindful.
[ 0.044392] AppArmor: AppArmor initialized
[ 0.048531] TOMOYO Linux initialized
[ 0.052154] LSM support for eBPF active
[ 0.056118] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063813] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073136] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.080456] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.086662] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.092951] rcu: Hierarchical SRCU implementation.
[ 0.097789] rcu: Max phase no-delay instances is 1000.
[ 0.104157] EFI services will not be available.
[ 0.109063] smp: Bringing up secondary CPUs ...
[ 0.114003] Detected PIPT I-cache on CPU1
[ 0.114070] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.114432] Detected PIPT I-cache on CPU2
[ 0.114465] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.114822] Detected PIPT I-cache on CPU3
[ 0.114859] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.114900] smp: Brought up 1 node, 4 CPUs
[ 0.150942] SMP: Total of 4 processors activated.
[ 0.155691] CPU features: detected: 32-bit EL0 Support
[ 0.160877] CPU features: detected: 32-bit EL1 Support
[ 0.166065] CPU features: detected: CRC32 instructions
[ 0.171308] CPU: All CPU(s) started at EL2
[ 0.175452] alternatives: applying system-wide alternatives
[ 0.258408] node 0 deferred pages initialised in 76ms
[ 0.264815] devtmpfs: initialized
[ 0.273542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.283443] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291762] pinctrl core: initialized pinctrl subsystem
[ 0.297893] DMI not present or invalid.
[ 0.302114] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.309435] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.317123] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.325981] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.334108] audit: initializing netlink subsys (disabled)
[ 0.339694] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[ 0.340243] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347525] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.353679] thermal_sys: Registered thermal governor 'step_wise'
[ 0.359743] thermal_sys: Registered thermal governor 'user_space'
[ 0.365808] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.371988] cpuidle: using governor ladder
[ 0.382720] cpuidle: using governor menu
[ 0.386794] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.393708] ASID allocator initialised with 32768 entries
[ 0.399403] Serial: AMBA PL011 UART driver
[ 0.410595] KASLR enabled
[ 0.413990] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.420853] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.427185] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.434040] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.440368] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.447221] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.453549] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.460403] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.467859] ACPI: Interpreter disabled.
[ 0.471982] iommu: Default domain type: Translated
[ 0.476912] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.483400] EDAC MC: Ver: 3.0.0
[ 0.486837] scmi_core: SCMI protocol bus registered
[ 0.492347] NetLabel: Initializing
[ 0.495784] NetLabel: domain hash size = 128
[ 0.500181] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.505928] NetLabel: unlabeled traffic allowed by default
[ 0.511688] vgaarb: loaded
[ 0.514638] clocksource: Switched to clocksource arch_sys_counter
[ 0.550168] VFS: Disk quotas dquot_6.6.0
[ 0.554192] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.561612] AppArmor: AppArmor Filesystem Enabled
[ 0.566413] pnp: PnP ACPI: disabled
[ 0.573930] NET: Registered PF_INET protocol family
[ 0.579340] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.590883] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.599685] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.607733] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.616741] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.626846] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.633867] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.641816] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.648774] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.656248] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.662013] NET: Registered PF_XDP protocol family
[ 0.666876] PCI: CLS 0 bytes, default 64
[ 0.671112] Trying to unpack rootfs image as initramfs...
[ 0.680902] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.689436] kvm [1]: IPA Size Limit: 44 bits
[ 0.694781] kvm [1]: vgic interrupt IRQ9
[ 0.698807] kvm [1]: Hyp mode initialized successfully
[ 0.705288] Initialise system trusted keyrings
[ 0.709879] Key type blacklist registered
[ 0.714266] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.720942] zbud: loaded
[ 0.724077] integrity: Platform Keyring initialized
[ 0.729103] integrity: Machine keyring initialized
[ 0.733973] Key type asymmetric registered
[ 0.738126] Asymmetric key parser 'x509' registered
[ 1.677612] Freeing initrd memory: 31880K
[ 1.695692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.703273] io scheduler mq-deadline registered
[ 1.709908] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 1.722903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.730089] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.737130] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.746283] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.754467] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.763278] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.769620] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.775163] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.785645] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.791760] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.902650] brcm-pcie fd500000.pcie: uni-dir CLKREQ# for ASPM
[ 1.910488] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.965051] SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
[ 1.965057] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc6+ #1
[ 1.965062] Hardware name: Raspberry Pi Compute Module 4 Rev 1.0 (DT)
[ 1.965064] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.965069] pc : pci_generic_config_read+0x44/0xe8
[ 1.965083] lr : pci_generic_config_read+0x2c/0xe8
[ 1.965089] sp : ffff80000802b800
[ 1.965091] x29: ffff80000802b800 x28: 0000000000000000 x27: 0000000000000001
[ 1.965098] x26: ffff4f8a8b0e9000 x25: 0000000000000001 x24: 0000000000000000
[ 1.965104] x23: ffff80000802b904 x22: 0000000000000000 x21: ffffdc76a4eda000
[ 1.965110] x20: 0000000000000004 x19: ffff80000802b864 x18: 0000000000000000
[ 1.965115] x17: 5d66666666666633 x16: 303678302d303030 x15: 0000000000000030
[ 1.965120] x14: 0000000000000000 x13: 2943535328203178 x12: 206549435020732f
[ 1.965126] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffdc76a36e0dc4
[ 1.965131] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 000000000000000b
[ 1.965137] x5 : ffff4f8a8b0eeb80 x4 : ffff800008a10000 x3 : ffff800008a10000
[ 1.965142] x2 : 0000000000008000 x1 : 00000000deaddead x0 : ffff800008a18000
[ 1.965149] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 1.965151] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc6+ #1
[ 1.965155] Hardware name: Raspberry Pi Compute Module 4 Rev 1.0 (DT)
[ 1.965157] Call trace:
[ 1.965159] dump_backtrace+0xa8/0x138
[ 1.965165] show_stack+0x20/0x38
[ 1.965168] dump_stack_lvl+0x48/0x60
[ 1.965176] dump_stack+0x18/0x28
[ 1.965181] panic+0x378/0x398
[ 1.965186] nmi_panic+0xb4/0xc0
[ 1.965189] arm64_serror_panic+0x78/0x90
[ 1.965193] do_serror+0x30/0x70
[ 1.965197] el1h_64_error_handler+0x30/0x48
[ 1.965201] el1h_64_error+0x64/0x68
[ 1.965205] pci_generic_config_read+0x44/0xe8
[ 1.965210] pci_bus_read_config_dword+0x98/0x140
[ 1.965216] pci_bus_generic_read_dev_vendor_id+0x3c/0x1c0
[ 1.965220] pci_scan_single_device+0xa8/0x118
[ 1.965223] pci_scan_slot+0x6c/0x1e0
[ 1.965226] pci_scan_child_bus_extend+0x50/0x2e0
[ 1.965230] pci_scan_bridge_extend+0x15c/0x5a8
[ 1.965233] pci_scan_child_bus_extend+0x110/0x2e0
[ 1.965236] pci_scan_root_bus_bridge+0x6c/0xf8
[ 1.965240] pci_host_probe+0x20/0xd0
[ 1.965243] brcm_pcie_probe+0x294/0x620
[ 1.965248] platform_probe+0x70/0xe8
[ 1.965255] really_probe+0x18c/0x3d8
[ 1.965258] __driver_probe_device+0x84/0x198
[ 1.965262] driver_probe_device+0x44/0x120
[ 1.965266] __driver_attach+0xfc/0x210
[ 1.965270] bus_for_each_dev+0x7c/0xe8
[ 1.965273] driver_attach+0x2c/0x40
[ 1.965277] bus_add_driver+0x118/0x228
[ 1.965281] driver_register+0x68/0x138
[ 1.965285] __platform_driver_register+0x30/0x48
[ 1.965290] brcm_pcie_driver_init+0x24/0x38
[ 1.965296] do_one_initcall+0x4c/0x238
[ 1.965300] kernel_init_freeable+0x21c/0x3f0
[ 1.965306] kernel_init+0x2c/0x1f8
[ 1.965310] ret_from_fork+0x10/0x20
[ 1.965315] SMP: stopping secondary CPUs
[ 1.965322] Kernel Offset: 0x5c769b000000 from 0xffff800008000000
[ 1.965325] PHYS_OFFSET: 0xffffb07680000000
[ 1.965326] CPU features: 0x400002,013c0400,0000421b
[ 1.965330] Memory Limit: none
[ 2.265404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
[-- Attachment #1.4: cm4+pcie.config --]
[-- Type: text/plain, Size: 290286 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.3.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=100201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=120
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_SCHED_THERMAL_PRESSURE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_LAZY is not set
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM64=y
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_CONT_PTE_SHIFT=4
CONFIG_ARM64_CONT_PMD_SHIFT=4
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
#
# Platform selection
#
# CONFIG_ARCH_ACTIONS is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_APPLE is not set
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
# CONFIG_ARCH_BCM_IPROC is not set
# CONFIG_ARCH_BCMBCA is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_BITMAIN is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_LG1K is not set
CONFIG_ARCH_HISI=y
# CONFIG_ARCH_KEEMBAY is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NXP=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_S32 is not set
# CONFIG_ARCH_NPCM is not set
CONFIG_ARCH_QCOM=y
# CONFIG_ARCH_REALTEK is not set
# CONFIG_ARCH_RENESAS is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
# CONFIG_ARCH_INTEL_SOCFPGA is not set
CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_TEGRA=y
# CONFIG_ARCH_SPRD is not set
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
# CONFIG_ARCH_UNIPHIER is not set
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_VISCONTI is not set
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
# end of Platform selection
#
# Kernel Features
#
#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
CONFIG_ARM64_ERRATUM_1742098=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_2441007=y
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_ERRATUM_1508412=y
CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE=y
CONFIG_ARM64_ERRATUM_2051678=y
CONFIG_ARM64_ERRATUM_2077057=y
CONFIG_ARM64_ERRATUM_2658417=y
CONFIG_ARM64_ERRATUM_2119858=y
CONFIG_ARM64_ERRATUM_2139208=y
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
CONFIG_ARM64_ERRATUM_2054223=y
CONFIG_ARM64_ERRATUM_2067961=y
CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE=y
CONFIG_ARM64_ERRATUM_2253138=y
CONFIG_ARM64_ERRATUM_2224489=y
CONFIG_ARM64_ERRATUM_2441009=y
CONFIG_ARM64_ERRATUM_2064142=y
CONFIG_ARM64_ERRATUM_2038923=y
CONFIG_ARM64_ERRATUM_1902691=y
CONFIG_ARM64_ERRATUM_2457168=y
CONFIG_ARM64_ERRATUM_2645198=y
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23144=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
CONFIG_CAVIUM_ERRATUM_30115=y
CONFIG_CAVIUM_TX2_ERRATUM_219=y
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework
CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_39 is not set
CONFIG_ARM64_VA_BITS_48=y
CONFIG_ARM64_VA_BITS=48
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_CLUSTER is not set
CONFIG_SCHED_SMT=y
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_TRANS_TABLE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN=y
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
# CONFIG_ARM64_SW_TTBR0_PAN is not set
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_COMPAT_ALIGNMENT_FIXUPS=y
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
CONFIG_CP15_BARRIER_EMULATION=y
CONFIG_SETEND_EMULATION=y
#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
CONFIG_AS_HAS_LDAPR=y
CONFIG_AS_HAS_LSE_ATOMICS=y
CONFIG_ARM64_LSE_ATOMICS=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
# end of ARMv8.1 architectural features
#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
CONFIG_ARM64_PMEM=y
CONFIG_ARM64_RAS_EXTN=y
CONFIG_ARM64_CNP=y
# end of ARMv8.2 architectural features
#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_ARMV8_3=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features
#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features
#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARM64_AS_HAS_MTE=y
CONFIG_ARM64_MTE=y
# end of ARMv8.5 architectural features
#
# ARMv8.7 architectural features
#
CONFIG_ARM64_EPAN=y
# end of ARMv8.7 architectural features
CONFIG_ARM64_SVE=y
CONFIG_ARM64_SME=y
CONFIG_ARM64_MODULE_PLTS=y
# CONFIG_ARM64_PSEUDO_NMI is not set
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
# end of Kernel Features
#
# Boot options
#
CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y
# end of Boot options
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_DT_IDLE_STATES=y
CONFIG_DT_IDLE_GENPD=y
#
# ARM CPU Idle Drivers
#
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
# end of ARM CPU Idle Drivers
# end of CPU Idle
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=m
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_ACPI_CPPC_CPUFREQ_FIE=y
# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
CONFIG_ARM_ARMADA_37XX_CPUFREQ=m
# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
CONFIG_ARM_SCPI_CPUFREQ=m
CONFIG_ARM_IMX_CPUFREQ_DT=m
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
# CONFIG_ARM_SCMI_CPUFREQ is not set
CONFIG_ARM_TEGRA20_CPUFREQ=m
CONFIG_ARM_TEGRA124_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=m
# end of CPU Frequency scaling
# end of CPU Power Management
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_GENERIC_GSI=y
CONFIG_ACPI_CCA_REQUIRED=y
CONFIG_ACPI_TABLE_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_MCFG=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_SEA=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_WATCHDOG=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_IORT=y
CONFIG_ACPI_GTDT=y
CONFIG_ACPI_APMT=y
CONFIG_ACPI_PPTT=y
CONFIG_ACPI_PCC=y
# CONFIG_ACPI_FFH is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_ACPI_PRMT=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_NVHE_EL2_DEBUG is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_ARCH_HAS_SUBPAGE_FAULTS=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_RELR=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_8B=y
CONFIG_FUNCTION_ALIGNMENT=8
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set
CONFIG_BLK_CGROUP_IOCOST=y
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_SPIN_TRYLOCK=y
CONFIG_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_INLINE_SPIN_LOCK=y
CONFIG_INLINE_SPIN_LOCK_BH=y
CONFIG_INLINE_SPIN_LOCK_IRQ=y
CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_INLINE_SPIN_UNLOCK_BH=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_READ_LOCK=y
CONFIG_INLINE_READ_LOCK_BH=y
CONFIG_INLINE_READ_LOCK_IRQ=y
CONFIG_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_BH=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_WRITE_LOCK=y
CONFIG_INLINE_WRITE_LOCK_BH=y
CONFIG_INLINE_WRITE_LOCK_IRQ=y
CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_BH=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=m
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=19
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
# CONFIG_ZONE_DEVICE is not set
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_USES_PG_ARCH_X=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_LRU_GEN=y
# CONFIG_LRU_GEN_ENABLED is not set
# CONFIG_LRU_GEN_STATS is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
# CONFIG_NF_FLOW_TABLE_PROCFS is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
CONFIG_NET_DSA=m
# CONFIG_NET_DSA_TAG_NONE is not set
# CONFIG_NET_DSA_TAG_AR9331 is not set
# CONFIG_NET_DSA_TAG_BRCM is not set
# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
# CONFIG_NET_DSA_TAG_HELLCREEK is not set
# CONFIG_NET_DSA_TAG_GSWIP is not set
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
# CONFIG_NET_DSA_TAG_MTK is not set
# CONFIG_NET_DSA_TAG_KSZ is not set
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
# CONFIG_NET_DSA_TAG_QCA is not set
# CONFIG_NET_DSA_TAG_RTL4_A is not set
# CONFIG_NET_DSA_TAG_RTL8_4 is not set
# CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set
# CONFIG_NET_DSA_TAG_LAN9303 is not set
# CONFIG_NET_DSA_TAG_SJA1105 is not set
CONFIG_NET_DSA_TAG_TRAILER=m
# CONFIG_NET_DSA_TAG_XRS700X is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_MQPRIO_LIB=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
# CONFIG_QRTR_SMD is not set
# CONFIG_QRTR_TUN is not set
CONFIG_QRTR_MHI=m
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# end of AX.25 network device drivers
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBCM4377 is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
CONFIG_BT_MTKUART=m
CONFIG_BT_QCOMSMD=m
CONFIG_BT_HCIRSI=m
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
# CONFIG_RXPERF is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_NCI_UART is not set
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_TRF7970A is not set
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_VIRTUAL_NCI is not set
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_PN532_UART is not set
# CONFIG_NFC_MRVL_USB is not set
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_ST_NCI_SPI is not set
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
# CONFIG_NFC_S3FWRN5_I2C is not set
# CONFIG_NFC_S3FWRN82_UART is not set
# CONFIG_NFC_ST95HF is not set
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_TEGRA_AHB=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_XILINX_NWL=y
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_TEGRA=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_CPM is not set
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=y
CONFIG_PCIE_BRCMSTB=y
CONFIG_PCI_HYPERV_INTERFACE=m
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_HISI_ERR is not set
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_IMX6_HOST is not set
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_ROCKCHIP_DW_HOST=y
CONFIG_PCIE_KIRIN=y
# CONFIG_PCIE_HISI_STB is not set
CONFIG_PCI_MESON=m
# CONFIG_PCIE_AL is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=m
# CONFIG_CXL_MEM_RAW_COMMANDS is not set
CONFIG_CXL_ACPI=m
CONFIG_CXL_PMEM=m
CONFIG_CXL_MEM=m
CONFIG_CXL_PORT=y
CONFIG_CXL_SUSPEND=y
CONFIG_CXL_REGION=y
# CONFIG_CXL_REGION_INVALIDATION_TEST is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=m
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_ARCH_NUMA=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
# CONFIG_BRCMSTB_GISB_ARB is not set
CONFIG_MOXTET=m
CONFIG_HISILICON_LPC=y
# CONFIG_IMX_WEIM is not set
CONFIG_QCOM_EBI2=y
# CONFIG_QCOM_SSC_BLOCK_BUS is not set
CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUNXI_RSB=y
CONFIG_TEGRA_ACONNECT=y
# CONFIG_TEGRA_GMI is not set
CONFIG_VEXPRESS_CONFIG=y
CONFIG_FSL_MC_BUS=y
CONFIG_FSL_MC_UAPI_SUPPORT=y
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=m
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
# CONFIG_ARM_SCMI_RAW_MODE_SUPPORT is not set
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
# CONFIG_ARM_SDE_INTERFACE is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_ISCSI_IBFT=m
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_TURRIS_MOX_RWTM=m
# CONFIG_ARM_FFA_TRANSPORT is not set
CONFIG_FW_CS_DSP=m
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_CBMEM is not set
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=m
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
CONFIG_GOOGLE_VPD=m
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
# CONFIG_EFI_ZBOOT is not set
CONFIG_EFI_ARMSTUB_DTB_LOADER=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=m
# CONFIG_EFI_TEST is not set
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_ARM=y
# CONFIG_IMX_DSP is not set
# CONFIG_IMX_SCU is not set
CONFIG_MESON_SM=y
CONFIG_ARM_PSCI_FW=y
# CONFIG_ARM_PSCI_CHECKER is not set
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y
#
# Tegra firmware driver
#
# CONFIG_TEGRA_IVC is not set
# end of Tegra firmware driver
#
# Zynq MPSoC Firmware Drivers
#
CONFIG_ZYNQMP_FIRMWARE=y
# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
# end of Zynq MPSoC Firmware Drivers
# end of Firmware Drivers
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
# CONFIG_GNSS_USB is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
# CONFIG_MTD_PSTORE is not set
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_MCHP48L640 is not set
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_NUMA=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_CDROM=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
# CONFIG_ZRAM_MULTI_COMP is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_FCLOOP is not set
CONFIG_NVME_TARGET_TCP=m
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_HP_ILO is not set
CONFIG_QCOM_COINCELL=m
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_HISI_HIKEY_USB is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_HISI_SAS=m
CONFIG_SCSI_HISI_SAS_PCI=m
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_ARCMSR is not set
CONFIG_SCSI_ESAS2R=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_DWC=m
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_CEVA=m
CONFIG_AHCI_MVEBU=m
# CONFIG_AHCI_SUNXI is not set
CONFIG_AHCI_TEGRA=m
CONFIG_AHCI_XGENE=m
CONFIG_AHCI_QORIQ=m
CONFIG_SATA_AHCI_SEATTLE=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IMX is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PARPORT is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
# CONFIG_BAREUDP is not set
CONFIG_GTP=m
# CONFIG_AMT is not set
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
CONFIG_MHI_NET=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
# CONFIG_ATM_IDT77252 is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=m
#
# Distributed Switch Architecture drivers
#
# CONFIG_B53 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
# CONFIG_NET_DSA_LOOP is not set
# CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK is not set
# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
# CONFIG_NET_DSA_MT7530 is not set
CONFIG_NET_DSA_MV88E6060=m
# CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set
CONFIG_NET_DSA_MV88E6XXX=m
# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
CONFIG_NET_DSA_MSCC_FELIX_DSA_LIB=m
# CONFIG_NET_DSA_MSCC_OCELOT_EXT is not set
CONFIG_NET_DSA_MSCC_FELIX=m
# CONFIG_NET_DSA_MSCC_SEVILLE is not set
# CONFIG_NET_DSA_AR9331 is not set
# CONFIG_NET_DSA_QCA8K is not set
# CONFIG_NET_DSA_SJA1105 is not set
# CONFIG_NET_DSA_XRS700X_I2C is not set
# CONFIG_NET_DSA_XRS700X_MDIO is not set
# CONFIG_NET_DSA_REALTEK is not set
# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set
# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALLWINNER=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
CONFIG_PCNET32=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=m
CONFIG_NET_XGENE_V2=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
# CONFIG_MACB_PCI is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=m
CONFIG_THUNDER_NIC_VF=m
CONFIG_THUNDER_NIC_BGX=m
CONFIG_THUNDER_NIC_RGX=m
CONFIG_CAVIUM_PTP=m
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
# CONFIG_CHELSIO_IPSEC_INLINE is not set
# CONFIG_CHELSIO_TLS_DEVICE is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=m
# CONFIG_FSL_FMAN is not set
# CONFIG_FSL_PQ_MDIO is not set
CONFIG_FSL_XGMAC_MDIO=m
# CONFIG_GIANFAR is not set
CONFIG_FSL_DPAA2_ETH=m
# CONFIG_FSL_DPAA2_ETH_DCB is not set
CONFIG_FSL_DPAA2_PTP_CLOCK=m
# CONFIG_FSL_DPAA2_SWITCH is not set
CONFIG_FSL_ENETC_CORE=m
CONFIG_FSL_ENETC=m
CONFIG_FSL_ENETC_VF=m
CONFIG_FSL_ENETC_IERB=m
CONFIG_FSL_ENETC_MDIO=m
CONFIG_FSL_ENETC_PTP_CLOCK=m
CONFIG_FSL_ENETC_QOS=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=m
CONFIG_HISI_FEMAC=m
CONFIG_HIP04_ETH=m
# CONFIG_HI13X1_GMAC is not set
CONFIG_HNS_MDIO=m
CONFIG_HNS=m
CONFIG_HNS_DSAF=m
CONFIG_HNS_ENET=m
CONFIG_HNS3=m
CONFIG_HNS3_HCLGE=m
CONFIG_HNS3_DCB=y
CONFIG_HNS3_HCLGEVF=m
CONFIG_HNS3_ENET=m
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_ICE_SWITCHDEV=y
# CONFIG_FM10K is not set
CONFIG_IGC=m
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
# CONFIG_ADIN1110 is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_MVNETA=m
CONFIG_MVPP2=m
# CONFIG_MVPP2_PTP is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_OCTEONTX2_AF is not set
# CONFIG_OCTEONTX2_PF is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
# CONFIG_MLX5_EN_MACSEC is not set
# CONFIG_MLX5_EN_IPSEC is not set
# CONFIG_MLX5_EN_TLS is not set
CONFIG_MLX5_SW_STEERING=y
# CONFIG_MLX5_SF is not set
# CONFIG_MLXSW_CORE is not set
CONFIG_MLXFW=m
# CONFIG_MLXBF_GIGE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_LAN743X=m
# CONFIG_LAN966X_SWITCH is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=m
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_NET_IPSEC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_NE2K_PCI=m
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCA7000_UART is not set
CONFIG_QCOM_EMAC=m
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=m
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_NETSEC=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not set
CONFIG_STMMAC_PLATFORM=m
# CONFIG_DWMAC_DWC_QOS_ETH is not set
CONFIG_DWMAC_GENERIC=m
CONFIG_DWMAC_IPQ806X=m
CONFIG_DWMAC_MESON=m
CONFIG_DWMAC_QCOM_ETHQOS=m
CONFIG_DWMAC_ROCKCHIP=m
CONFIG_DWMAC_SUNXI=m
CONFIG_DWMAC_SUN8I=m
CONFIG_DWMAC_IMX8=m
# CONFIG_DWMAC_INTEL_PLAT is not set
# CONFIG_DWMAC_TEGRA is not set
# CONFIG_DWMAC_LOONGSON is not set
# CONFIG_STMMAC_PCI is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=m
CONFIG_SFP=m
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MESON_GXL_PHY=m
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM7XXX_PHY=m
# CONFIG_BCM84881_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
CONFIG_AT803X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_CAN327 is not set
CONFIG_CAN_FLEXCAN=m
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_XILINXCAN is not set
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
CONFIG_CAN_PEAK_PCIEFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB=m
# CONFIG_CAN_ETAS_ES58X is not set
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_MCBA_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_UCAN=m
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_FWNODE_MDIO=m
CONFIG_OF_MDIO=m
CONFIG_ACPI_MDIO=m
CONFIG_MDIO_DEVRES=m
# CONFIG_MDIO_SUN4I is not set
CONFIG_MDIO_XGENE=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_HISI_FEMAC=m
CONFIG_MDIO_I2C=m
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_IPQ4019 is not set
# CONFIG_MDIO_IPQ8064 is not set
CONFIG_MDIO_THUNDER=m
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_MESON_G12A=m
CONFIG_MDIO_BUS_MUX_MESON_GXL=m
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=m
#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
# end of PCS device drivers
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_PCI_NO_EEPROM is not set
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_AHB is not set
# CONFIG_ATH10K_SDIO is not set
CONFIG_ATH10K_USB=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_ATH11K=m
CONFIG_ATH11K_PCI=m
# CONFIG_ATH11K_DEBUG is not set
# CONFIG_ATH11K_TRACING is not set
# CONFIG_ATH12K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
# CONFIG_MWIFIEX_USB is not set
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
# CONFIG_MT7603E is not set
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
# CONFIG_MT7663S is not set
CONFIG_MT7915E=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921E=m
# CONFIG_MT7921S is not set
CONFIG_MT7921U=m
# CONFIG_MT7996E is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_8822BE=m
# CONFIG_RTW88_8822BU is not set
CONFIG_RTW88_8822CE=m
# CONFIG_RTW88_8822CU is not set
CONFIG_RTW88_8723DE=m
# CONFIG_RTW88_8723DU is not set
CONFIG_RTW88_8821CE=m
# CONFIG_RTW88_8821CU is not set
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set
CONFIG_RTW89=m
CONFIG_RTW89_CORE=m
CONFIG_RTW89_PCI=m
CONFIG_RTW89_8852A=m
CONFIG_RTW89_8852AE=m
# CONFIG_RTW89_8852BE is not set
# CONFIG_RTW89_8852CE is not set
# CONFIG_RTW89_DEBUGMSG is not set
# CONFIG_RTW89_DEBUGFS is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
# CONFIG_RSI_SDIO is not set
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
CONFIG_IEEE802154_HWSIM=m
#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
# CONFIG_WWAN_HWSIM is not set
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
# CONFIG_RPMSG_WWAN_CTRL is not set
CONFIG_IOSM=m
# CONFIG_MTK_T7XX is not set
# end of Wireless WAN
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_SNVS_PWRKEY=m
# CONFIG_KEYBOARD_IMX is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_TEGRA=m
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SUN4I_LRADC is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CROS_EC=m
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SUR40=m
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=m
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PM8941_PWRKEY=m
# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_RK805_PWRKEY=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IBM_PANEL is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_INPUT_HISI_POWERKEY=m
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_AMBAKMI is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_EARLYCON_SEMIHOST is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_HVC_DCC is not set
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=m
CONFIG_TTY_PRINTK_LEVEL=6
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_SSIF_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_BCM2835=m
CONFIG_HW_RANDOM_IPROC_RNG200=m
CONFIG_HW_RANDOM_OMAP=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_HISI=m
CONFIG_HW_RANDOM_XGENE=m
CONFIG_HW_RANDOM_MESON=m
CONFIG_HW_RANDOM_CAVIUM=m
CONFIG_HW_RANDOM_OPTEE=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=m
CONFIG_HW_RANDOM_CN10K=m
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=m
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=m
# CONFIG_TCG_FTPM_TEE is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_HIX5HD2 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_BCM2835=m
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HISI is not set
CONFIG_I2C_IMX=m
CONFIG_I2C_IMX_LPI2C=m
CONFIG_I2C_MESON=m
CONFIG_I2C_MV64XXX=m
# CONFIG_I2C_NOMADIK is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=m
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_QCOM_CCI is not set
CONFIG_I2C_QCOM_GENI=m
CONFIG_I2C_QUP=m
CONFIG_I2C_RK3X=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_SYNQUACER is not set
CONFIG_I2C_TEGRA=m
# CONFIG_I2C_VERSATILE is not set
CONFIG_I2C_THUNDERX=m
# CONFIG_I2C_XILINX is not set
CONFIG_I2C_XLP9XX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PCI1XXXX is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_XGENE_SLIMPRO=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_ARMADA_3700=m
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
# CONFIG_SPI_CADENCE_XSPI is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_FSL_LPSPI is not set
CONFIG_SPI_FSL_QUADSPI=m
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
CONFIG_SPI_NXP_FLEXSPI=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_IMX=m
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_FSL_SPI is not set
CONFIG_SPI_FSL_DSPI=m
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_ROCKCHIP_SFC=m
# CONFIG_SPI_QCOM_QSPI is not set
CONFIG_SPI_QUP=m
# CONFIG_SPI_QCOM_GENI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SN_F_OSPI is not set
# CONFIG_SPI_SUN4I is not set
CONFIG_SPI_SUN6I=m
# CONFIG_SPI_SYNQUACER is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_TEGRA210_QUAD is not set
CONFIG_SPI_TEGRA114=m
CONFIG_SPI_TEGRA20_SFLASH=m
CONFIG_SPI_TEGRA20_SLINK=m
CONFIG_SPI_THUNDERX=m
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_XLP=m
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m
CONFIG_PTP_1588_CLOCK_QORIQ=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_INES=m
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
CONFIG_PTP_1588_CLOCK_OCP=m
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AXP209=m
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_MAX77620=y
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_ZYNQMP=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
# CONFIG_PINCTRL_IMX8ULP is not set
# CONFIG_PINCTRL_IMXRT1050 is not set
# CONFIG_PINCTRL_IMX93 is not set
# CONFIG_PINCTRL_IMXRT1170 is not set
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_IPQ5332 is not set
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_IPQ6018 is not set
# CONFIG_PINCTRL_MDM9607 is not set
CONFIG_PINCTRL_MSM8916=y
# CONFIG_PINCTRL_MSM8953 is not set
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
CONFIG_PINCTRL_MSM8996=y
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCM2290 is not set
# CONFIG_PINCTRL_QCS404 is not set
# CONFIG_PINCTRL_QDF2XXX is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
# CONFIG_PINCTRL_QDU1000 is not set
# CONFIG_PINCTRL_SA8775P is not set
# CONFIG_PINCTRL_SC7180 is not set
# CONFIG_PINCTRL_SC7280 is not set
# CONFIG_PINCTRL_SC8180X is not set
# CONFIG_PINCTRL_SC8280XP is not set
# CONFIG_PINCTRL_SDM660 is not set
# CONFIG_PINCTRL_SDM670 is not set
CONFIG_PINCTRL_SDM845=y
# CONFIG_PINCTRL_SM6115 is not set
# CONFIG_PINCTRL_SM6125 is not set
# CONFIG_PINCTRL_SM6350 is not set
# CONFIG_PINCTRL_SM6375 is not set
# CONFIG_PINCTRL_SM8150 is not set
# CONFIG_PINCTRL_SM8250 is not set
# CONFIG_PINCTRL_SM8350 is not set
# CONFIG_PINCTRL_SM8450 is not set
# CONFIG_PINCTRL_SM8550 is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SUNXI=y
# CONFIG_PINCTRL_SUN4I_A10 is not set
# CONFIG_PINCTRL_SUN5I is not set
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN6I_A31_R is not set
# CONFIG_PINCTRL_SUN8I_A23 is not set
# CONFIG_PINCTRL_SUN8I_A33 is not set
# CONFIG_PINCTRL_SUN8I_A83T is not set
# CONFIG_PINCTRL_SUN8I_A83T_R is not set
# CONFIG_PINCTRL_SUN8I_A23_R is not set
# CONFIG_PINCTRL_SUN8I_H3 is not set
CONFIG_PINCTRL_SUN8I_H3_R=y
# CONFIG_PINCTRL_SUN8I_V3S is not set
# CONFIG_PINCTRL_SUN9I_A80 is not set
# CONFIG_PINCTRL_SUN9I_A80_R is not set
# CONFIG_PINCTRL_SUN20I_D1 is not set
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
CONFIG_PINCTRL_SUN50I_A100=y
CONFIG_PINCTRL_SUN50I_A100_R=y
CONFIG_PINCTRL_SUN50I_H5=y
CONFIG_PINCTRL_SUN50I_H6=y
CONFIG_PINCTRL_SUN50I_H6_R=y
CONFIG_PINCTRL_SUN50I_H616=y
CONFIG_PINCTRL_SUN50I_H616_R=y
CONFIG_PINCTRL_TEGRA=y
CONFIG_PINCTRL_TEGRA124=y
CONFIG_PINCTRL_TEGRA210=y
CONFIG_PINCTRL_TEGRA_XUSB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=m
CONFIG_GPIO_IDIO_16=m
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EXAR=m
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_LOGICVC is not set
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_ROCKCHIP=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SYSCON is not set
CONFIG_GPIO_TEGRA=y
# CONFIG_GPIO_THUNDERX is not set
CONFIG_GPIO_VF610=y
CONFIG_GPIO_XGENE=y
CONFIG_GPIO_XGENE_SB=m
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=y
CONFIG_GPIO_ZYNQ=m
CONFIG_GPIO_ZYNQMP_MODEPIN=y
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_SL28CPLD=m
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=m
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
CONFIG_GPIO_MOXTET=m
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_GPIO=m
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_POWER_RESET_HISI=y
# CONFIG_POWER_RESET_LINKSTATION is not set
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_QCOM_PON is not set
# CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=m
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=m
# CONFIG_BATTERY_BQ27XXX_I2C is not set
CONFIG_BATTERY_BQ27XXX_HDQ=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_QCOM_SMBB=m
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_RK817=m
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_RT9467 is not set
# CONFIG_CHARGER_RT9471 is not set
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_CROS_PCHG=m
# CONFIG_CHARGER_UCS1002 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ARM_SCMI is not set
CONFIG_SENSORS_ARM_SCPI=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FTSTEUTATES=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=m
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
CONFIG_SENSORS_SL28CPLD=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHT4x=m
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VEXPRESS is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_XGENE=m
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
CONFIG_HISI_THERMAL=m
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_MAX77620_THERMAL is not set
CONFIG_QORIQ_THERMAL=m
CONFIG_SUN8I_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_ARMADA_THERMAL=m
CONFIG_AMLOGIC_THERMAL=y
#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=m
CONFIG_BCM2835_THERMAL=m
# end of Broadcom thermal drivers
#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=m
# CONFIG_QCOM_SPMI_ADC_TM5 is not set
CONFIG_QCOM_SPMI_TEMP_ALARM=m
# CONFIG_QCOM_LMH is not set
# end of Qualcomm thermal drivers
CONFIG_KHADAS_MCU_FAN_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set
CONFIG_GPIO_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=m
CONFIG_ARM_SBSA_WATCHDOG=m
CONFIG_ARMADA_37XX_WATCHDOG=m
# CONFIG_CADENCE_WATCHDOG is not set
CONFIG_DW_WATCHDOG=m
CONFIG_SUNXI_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MAX77620_WATCHDOG is not set
CONFIG_IMX2_WDT=m
# CONFIG_IMX7ULP_WDT is not set
CONFIG_TEGRA_WATCHDOG=m
CONFIG_QCOM_WDT=m
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
# CONFIG_ARM_SMC_WATCHDOG is not set
# CONFIG_PM8916_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_I6300ESB_WDT=m
# CONFIG_HP_WATCHDOG is not set
CONFIG_BCM2835_WDT=m
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AC100 is not set
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_AXP20X_RSB=m
CONFIG_MFD_CROS_EC_DEV=m
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_HI6421_SPMI is not set
CONFIG_MFD_HI655X_PMIC=m
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_QCOM_RPM=m
CONFIG_MFD_SPMI_PMIC=m
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
CONFIG_MFD_ROHM_BD718XX=m
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
CONFIG_MFD_KHADAS_MCU=m
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_MFD_VEXPRESS_SYSREG=y
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC_SPI is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_ARM_SCMI is not set
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BD718XX=m
# CONFIG_REGULATOR_CROS_EC is not set
# CONFIG_REGULATOR_DA9121 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_HI655X=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX77620=m
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX20411 is not set
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MP5416 is not set
CONFIG_REGULATOR_MP8859=m
# CONFIG_REGULATOR_MP886X is not set
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_PCA9450=m
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=m
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_RPM=m
CONFIG_REGULATOR_QCOM_RPMH=m
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_QCOM_SPMI=m
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_ROHM=m
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6190 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_VCTRL=m
# CONFIG_REGULATOR_VEXPRESS is not set
# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
# CONFIG_IR_FINTEK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_GPIO_TX is not set
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_MESON=m
# CONFIG_IR_MESON_TX is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_PWM_TX is not set
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SPI is not set
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_SUNXI is not set
# CONFIG_IR_TOY is not set
CONFIG_IR_TTUSBIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
# CONFIG_RC_XBOX_DVD is not set
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_CROS_EC is not set
CONFIG_CEC_MESON_AO=m
CONFIG_CEC_MESON_G12A_AO=m
# CONFIG_CEC_TEGRA is not set
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_H264=m
CONFIG_V4L2_VP9=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_AS102=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not set
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_SAA7134_GO7007 is not set
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_DVB_SMIPCIE=m
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_RADIO_ADAPTERS=m
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
# CONFIG_RADIO_SI4713 is not set
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
# CONFIG_USB_DSBR is not set
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
# CONFIG_I2C_SI470X is not set
# CONFIG_RADIO_WL128X is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_MUX is not set
#
# Allegro DVT media platform drivers
#
# CONFIG_VIDEO_ALLEGRO_DVT is not set
#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=m
#
# Amphion drivers
#
# CONFIG_VIDEO_AMPHION_VPU is not set
#
# Aspeed media platform drivers
#
#
# Atmel media platform drivers
#
#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
# CONFIG_VIDEO_CADENCE_CSI2TX is not set
#
# Chips&Media media platform drivers
#
# CONFIG_VIDEO_CODA is not set
#
# Intel media platform drivers
#
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m
#
# Mediatek media platform drivers
#
#
# Microchip Technology, Inc. media platform drivers
#
#
# NVidia media platform drivers
#
# CONFIG_VIDEO_TEGRA_VDE is not set
#
# NXP media platform drivers
#
# CONFIG_VIDEO_IMX7_CSI is not set
# CONFIG_VIDEO_IMX_MIPI_CSIS is not set
# CONFIG_VIDEO_IMX_PXP is not set
# CONFIG_VIDEO_DW100 is not set
# CONFIG_VIDEO_IMX8_JPEG is not set
#
# Qualcomm media platform drivers
#
# CONFIG_VIDEO_QCOM_CAMSS is not set
#
# Renesas media platform drivers
#
#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=m
CONFIG_VIDEO_ROCKCHIP_ISP1=m
#
# Samsung media platform drivers
#
#
# STMicroelectronics media platform drivers
#
#
# Sunxi media platform drivers
#
# CONFIG_VIDEO_SUN4I_CSI is not set
# CONFIG_VIDEO_SUN6I_CSI is not set
# CONFIG_VIDEO_SUN6I_MIPI_CSI2 is not set
# CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2 is not set
# CONFIG_VIDEO_SUN8I_DEINTERLACE is not set
# CONFIG_VIDEO_SUN8I_ROTATE is not set
#
# Texas Instruments drivers
#
#
# Verisilicon media platform drivers
#
CONFIG_VIDEO_HANTRO=m
CONFIG_VIDEO_HANTRO_IMX8M=y
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y
#
# VIA media platform drivers
#
#
# Xilinx media platform drivers
#
# CONFIG_VIDEO_XILINX is not set
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_VIDEO_VIMC is not set
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
# CONFIG_VIDEO_VISL is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
#
# Camera sensor devices
#
# CONFIG_VIDEO_AR0521 is not set
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX296 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_IMX412 is not set
# CONFIG_VIDEO_IMX415 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
CONFIG_VIDEO_NOON010PC30=m
# CONFIG_VIDEO_OG01A1B is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
# CONFIG_VIDEO_OV08X40 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV4689 is not set
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV7251 is not set
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8858 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9282 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=m
# CONFIG_VIDEO_ST_VGXY61 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_M5MOLS is not set
# end of Camera sensor devices
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
# CONFIG_VIDEO_TDA1997X is not set
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_MAX9286 is not set
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TC358746 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_ST_MIPID02 is not set
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# CONFIG_VIDEO_GS1662 is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_CXD2880 is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_MN88443X is not set
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
CONFIG_TEGRA_HOST1X_CONTEXT_BUS=y
CONFIG_TEGRA_HOST1X=m
CONFIG_TEGRA_HOST1X_FIREWALL=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=m
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_HDLCD=m
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
CONFIG_DRM_MALI_DISPLAY=m
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_AMD_ACP is not set
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN=y
CONFIG_DRM_AMD_DC_HDCP=y
CONFIG_DRM_AMD_DC_SI=y
# CONFIG_DRM_AMD_SECURE_DISPLAY is not set
# end of Display Engine Configuration
# CONFIG_HSA_AMD is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_PLATFORM_DRIVER=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_VOP=y
CONFIG_ROCKCHIP_VOP2=y
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
# CONFIG_ROCKCHIP_INNO_HDMI is not set
# CONFIG_ROCKCHIP_LVDS is not set
# CONFIG_ROCKCHIP_RGB is not set
# CONFIG_ROCKCHIP_RK3066_HDMI is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_SUN4I=m
CONFIG_DRM_SUN6I_DSI=m
CONFIG_DRM_SUN8I_DW_HDMI=m
CONFIG_DRM_SUN8I_MIXER=m
CONFIG_DRM_SUN8I_TCON_TOP=m
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_MSM=m
CONFIG_DRM_MSM_GPU_STATE=y
# CONFIG_DRM_MSM_GPU_SUDO is not set
CONFIG_DRM_MSM_MDSS=y
CONFIG_DRM_MSM_MDP4=y
CONFIG_DRM_MSM_MDP5=y
CONFIG_DRM_MSM_DPU=y
CONFIG_DRM_MSM_DP=y
CONFIG_DRM_MSM_DSI=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_10NM_PHY=y
CONFIG_DRM_MSM_DSI_7NM_PHY=y
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_TEGRA=m
# CONFIG_DRM_TEGRA_DEBUG is not set
CONFIG_DRM_TEGRA_STAGING=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
# CONFIG_DRM_PANEL_DSI_CM is not set
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_EDP=m
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
# CONFIG_DRM_PANEL_HIMAX_HX8394 is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
# CONFIG_DRM_PANEL_JADARD_JD9365DA_H3 is not set
# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
# CONFIG_DRM_PANEL_JDI_R63452 is not set
# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3051D is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
# CONFIG_DRM_PANEL_VISIONOX_VTDR6130 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_CROS_EC_ANX7688 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=m
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
CONFIG_DRM_LVDS_CODEC=m
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_NXP_PTN3460=m
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=m
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
CONFIG_DRM_TI_SN65DSI86=m
# CONFIG_DRM_TI_TPD12S015 is not set
CONFIG_DRM_ANALOGIX_ANX6345=m
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
CONFIG_DRM_ANALOGIX_DP=m
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
# CONFIG_DRM_CDNS_DSI is not set
CONFIG_DRM_CDNS_MHDP8546=m
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
CONFIG_DRM_DW_HDMI=m
# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
# CONFIG_DRM_DW_HDMI_GP_AUDIO is not set
CONFIG_DRM_DW_HDMI_CEC=m
CONFIG_DRM_DW_MIPI_DSI=m
# end of Display Interface Bridges
CONFIG_DRM_IMX_DCSS=m
CONFIG_DRM_V3D=m
CONFIG_DRM_VC4=m
CONFIG_DRM_VC4_HDMI_CEC=y
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_HISI_KIRIN=m
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_MESON=m
CONFIG_DRM_MESON_DW_HDMI=m
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_XEN_FRONTEND is not set
CONFIG_DRM_LIMA=m
CONFIG_DRM_PANFROST=m
# CONFIG_DRM_TIDSS is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_HYPERV=m
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_IMX is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_XILINX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_MX3=y
# CONFIG_FB_HYPERV is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
CONFIG_BACKLIGHT_PWM=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_GPIO=m
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_VGASTATE=m
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_SERIAL_GENERIC is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_SCODEC_CS35L41=m
CONFIG_SND_HDA_CS_DSP_CONTROLS=m
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CS8409=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# CONFIG_SND_HDA_CTL_DEV_ID is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_ALIGNED_MMIO=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_ADI is not set
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_BCM2835_SOC_I2S=m
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=m
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_MICFIL=m
# CONFIG_SND_SOC_FSL_XCVR is not set
CONFIG_SND_SOC_FSL_AUD2HTX=m
CONFIG_SND_SOC_FSL_UTILS=m
# CONFIG_SND_SOC_FSL_RPMSG is not set
CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_IMX_SOC=m
#
# SoC Audio support for Freescale i.MX boards:
#
# CONFIG_SND_SOC_IMX_ES8328 is not set
# CONFIG_SND_SOC_IMX_SGTL5000 is not set
# CONFIG_SND_SOC_IMX_SPDIF is not set
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_IMX_AUDMIX=m
CONFIG_SND_SOC_IMX_HDMI=m
# CONFIG_SND_SOC_IMX_RPMSG is not set
# CONFIG_SND_SOC_IMX_CARD is not set
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
# CONFIG_SND_KIRKWOOD_SOC is not set
# CONFIG_SND_SOC_IMG is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
#
# ASoC support for Amlogic platforms
#
CONFIG_SND_MESON_AIU=m
CONFIG_SND_MESON_AXG_FIFO=m
CONFIG_SND_MESON_AXG_FRDDR=m
CONFIG_SND_MESON_AXG_TODDR=m
CONFIG_SND_MESON_AXG_TDM_FORMATTER=m
CONFIG_SND_MESON_AXG_TDM_INTERFACE=m
CONFIG_SND_MESON_AXG_TDMIN=m
CONFIG_SND_MESON_AXG_TDMOUT=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_MESON_AXG_SPDIFOUT=m
CONFIG_SND_MESON_AXG_SPDIFIN=m
CONFIG_SND_MESON_AXG_PDM=m
CONFIG_SND_MESON_CARD_UTILS=m
CONFIG_SND_MESON_CODEC_GLUE=m
CONFIG_SND_MESON_GX_SOUND_CARD=m
CONFIG_SND_MESON_G12A_TOACODEC=m
CONFIG_SND_MESON_G12A_TOHDMITX=m
CONFIG_SND_SOC_MESON_T9015=m
# end of ASoC support for Amlogic platforms
CONFIG_SND_SOC_QCOM=m
CONFIG_SND_SOC_LPASS_CPU=m
CONFIG_SND_SOC_LPASS_PLATFORM=m
CONFIG_SND_SOC_LPASS_APQ8016=m
# CONFIG_SND_SOC_STORM is not set
CONFIG_SND_SOC_APQ8016_SBC=m
CONFIG_SND_SOC_QCOM_COMMON=m
# CONFIG_SND_SOC_SC7180 is not set
# CONFIG_SND_SOC_SC7280 is not set
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m
CONFIG_SND_SOC_ROCKCHIP_PDM=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
# CONFIG_SND_SOC_ROCKCHIP_MAX98090 is not set
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
# CONFIG_SND_SOC_RK3288_HDMI_ANALOG is not set
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
CONFIG_SND_SUN8I_CODEC=m
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
CONFIG_SND_SUN50I_CODEC_ANALOG=m
CONFIG_SND_SUN4I_I2S=m
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SUN50I_DMIC is not set
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=m
# end of Allwinner SoC Audio support
CONFIG_SND_SOC_TEGRA=m
# CONFIG_SND_SOC_TEGRA20_AC97 is not set
# CONFIG_SND_SOC_TEGRA20_DAS is not set
# CONFIG_SND_SOC_TEGRA20_I2S is not set
# CONFIG_SND_SOC_TEGRA20_SPDIF is not set
# CONFIG_SND_SOC_TEGRA30_AHUB is not set
# CONFIG_SND_SOC_TEGRA30_I2S is not set
# CONFIG_SND_SOC_TEGRA210_AHUB is not set
# CONFIG_SND_SOC_TEGRA210_DMIC is not set
# CONFIG_SND_SOC_TEGRA210_I2S is not set
# CONFIG_SND_SOC_TEGRA210_OPE is not set
# CONFIG_SND_SOC_TEGRA186_ASRC is not set
# CONFIG_SND_SOC_TEGRA186_DSPK is not set
# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
# CONFIG_SND_SOC_TEGRA210_MVC is not set
# CONFIG_SND_SOC_TEGRA210_SFC is not set
# CONFIG_SND_SOC_TEGRA210_AMX is not set
# CONFIG_SND_SOC_TEGRA210_ADX is not set
# CONFIG_SND_SOC_TEGRA210_MIXER is not set
# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
CONFIG_SND_SOC_TEGRA_MACHINE_DRV=m
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
# CONFIG_SND_SOC_TEGRA_WM9712 is not set
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_TEGRA_RT5677=m
# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_WM_HUBS=m
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1372_I2C is not set
# CONFIG_SND_SOC_ADAU1372_SPI is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_ADAU7118_HW is not set
# CONFIG_SND_SOC_ADAU7118_I2C is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4375 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_AK5558 is not set
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_ALC5632=m
# CONFIG_SND_SOC_AW8738 is not set
# CONFIG_SND_SOC_AW88395 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CROS_EC_CODEC is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
# CONFIG_SND_SOC_CS35L35 is not set
# CONFIG_SND_SOC_CS35L36 is not set
CONFIG_SND_SOC_CS35L41_LIB=m
# CONFIG_SND_SOC_CS35L41_SPI is not set
# CONFIG_SND_SOC_CS35L41_I2C is not set
# CONFIG_SND_SOC_CS35L45_SPI is not set
# CONFIG_SND_SOC_CS35L45_I2C is not set
# CONFIG_SND_SOC_CS42L42 is not set
# CONFIG_SND_SOC_CS42L42_SDW is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS42L83 is not set
# CONFIG_SND_SOC_CS4234 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
# CONFIG_SND_SOC_CX2072X is not set
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES7134 is not set
# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES8316=m
# CONFIG_SND_SOC_ES8326 is not set
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
CONFIG_SND_SOC_GTM601=m
# CONFIG_SND_SOC_HDA is not set
# CONFIG_SND_SOC_ICS43432 is not set
# CONFIG_SND_SOC_IDT821034 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not set
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
# CONFIG_SND_SOC_MAX98373_I2C is not set
CONFIG_SND_SOC_MAX98373_SDW=m
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM186X_SPI is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM5102A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_PEB2466 is not set
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RK817=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
# CONFIG_SND_SOC_RT1316_SDW is not set
# CONFIG_SND_SOC_RT1318_SDW is not set
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
# CONFIG_SND_SOC_RT711_SDCA_SDW is not set
# CONFIG_SND_SOC_RT712_SDCA_SDW is not set
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
# CONFIG_SND_SOC_RT715_SDCA_SDW is not set
# CONFIG_SND_SOC_RT9120 is not set
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
# CONFIG_SND_SOC_SIMPLE_MUX is not set
# CONFIG_SND_SOC_SMA1303 is not set
CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2518 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS2562 is not set
# CONFIG_SND_SOC_TAS2764 is not set
# CONFIG_SND_SOC_TAS2770 is not set
# CONFIG_SND_SOC_TAS2780 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS5805M is not set
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
CONFIG_SND_SOC_TLV320AIC31XX=m
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
# CONFIG_SND_SOC_TLV320AIC3X_SPI is not set
# CONFIG_SND_SOC_TLV320ADCX140 is not set
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WCD9335 is not set
# CONFIG_SND_SOC_WCD938X_SDW is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731_I2C is not set
# CONFIG_SND_SOC_WM8731_SPI is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=m
# CONFIG_SND_SOC_WM8961 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WM8994=m
# CONFIG_SND_SOC_WSA881X is not set
# CONFIG_SND_SOC_WSA883X is not set
# CONFIG_SND_SOC_ZL38060 is not set
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_MT6660 is not set
# CONFIG_SND_SOC_NAU8315 is not set
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_NAU8821 is not set
# CONFIG_SND_SOC_NAU8822 is not set
# CONFIG_SND_SOC_NAU8824 is not set
# CONFIG_SND_SOC_TPA6130A2 is not set
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
# CONFIG_SND_TEST_COMPONENT is not set
CONFIG_SND_XEN_FRONTEND=m
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
# CONFIG_HID_EVISION is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_FT260=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
# CONFIG_HID_MEGAWORLD_FF is not set
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
# CONFIG_STEAM_FF is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
CONFIG_HID_MCP2221=m
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support
CONFIG_I2C_HID=m
CONFIG_I2C_HID_ACPI=m
CONFIG_I2C_HID_OF=m
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
CONFIG_I2C_HID_CORE=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_PLATFORM=m
# CONFIG_USB_XHCI_HISTB is not set
CONFIG_USB_XHCI_MVEBU=m
CONFIG_USB_XHCI_TEGRA=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_FSL=m
CONFIG_USB_EHCI_HCD_ORION=m
CONFIG_USB_EHCI_TEGRA=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_XEN_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=15
CONFIG_USBIP_VHCI_NR_HCS=8
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
CONFIG_USB_MUSB_SUNXI=m
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC3_HAPS=m
CONFIG_USB_DWC3_MESON_G12A=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC3_QCOM=m
CONFIG_USB_DWC3_IMX8MP=m
CONFIG_USB_DWC3_XILINX=m
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_IMX=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_CHIPIDEA_TEGRA=m
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_QCOM_EUD is not set
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
# CONFIG_USB_ONBOARD_HUB is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_MXS_PHY is not set
CONFIG_USB_TEGRA_PHY=m
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
# CONFIG_U_SERIAL_CONSOLE is not set
#
# USB Peripheral Controller
#
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_SNP_UDC_PLAT is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_NET2280=m
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_MAX3420_UDC is not set
# CONFIG_USB_TEGRA_XUDC is not set
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
# CONFIG_USB_CONFIGFS_F_TCM is not set
#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_RAW_GADGET is not set
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
# CONFIG_TYPEC_RT1711H is not set
# CONFIG_TYPEC_TCPCI_MAXIM is not set
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_UCSI=m
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=m
# CONFIG_UCSI_STM32G0 is not set
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_ANX7411 is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_HD3SS3220 is not set
# CONFIG_TYPEC_STUSB160X is not set
# CONFIG_TYPEC_QCOM_PMIC is not set
# CONFIG_TYPEC_WUSB3801 is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_FSA4480 is not set
# CONFIG_TYPEC_MUX_GPIO_SBU is not set
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=m
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=256
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_ARMMMCI=m
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_STM32_SDMMC=y
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_OF_ARASAN=m
# CONFIG_MMC_SDHCI_OF_AT91 is not set
CONFIG_MMC_SDHCI_OF_ESDHC=m
CONFIG_MMC_SDHCI_OF_DWCMSHC=m
# CONFIG_MMC_SDHCI_CADENCE is not set
CONFIG_MMC_SDHCI_ESDHC_IMX=m
CONFIG_MMC_SDHCI_TEGRA=m
# CONFIG_MMC_SDHCI_PXAV3 is not set
CONFIG_MMC_SDHCI_F_SDH30=m
# CONFIG_MMC_SDHCI_MILBEAUT is not set
CONFIG_MMC_SDHCI_IPROC=m
CONFIG_MMC_MESON_GX=m
# CONFIG_MMC_MESON_MX_SDIO is not set
CONFIG_MMC_SDHCI_MSM=m
# CONFIG_MMC_MXC is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
# CONFIG_MMC_DW_BLUEFIELD is not set
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_HI3798CV200 is not set
CONFIG_MMC_DW_K3=m
# CONFIG_MMC_DW_PCI is not set
CONFIG_MMC_DW_ROCKCHIP=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_SUNXI=m
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_BCM2835=m
# CONFIG_MMC_MTK is not set
CONFIG_MMC_SDHCI_XENON=m
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MMC_SDHCI_AM654 is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFS_BSG is not set
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=m
# CONFIG_SCSI_UFS_CDNS_PLATFORM is not set
# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set
CONFIG_SCSI_UFS_QCOM=m
# CONFIG_SCSI_UFS_HISI is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_EL15203000 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
# CONFIG_LEDS_QCOM_LPG is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
# CONFIG_INFINIBAND_BNXT_RE is not set
CONFIG_INFINIBAND_CXGB4=m
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_INFINIBAND_ERDMA is not set
CONFIG_INFINIBAND_HNS=m
CONFIG_INFINIBAND_HNS_HIP08=y
CONFIG_INFINIBAND_IRDMA=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_QEDR=m
# CONFIG_INFINIBAND_VMWARE_PVRDMA is not set
CONFIG_RDMA_RXE=m
# CONFIG_RDMA_SIW is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_LAYERSCAPE=m
CONFIG_EDAC_THUNDERX=m
# CONFIG_EDAC_SYNOPSYS is not set
CONFIG_EDAC_XGENE=m
# CONFIG_EDAC_DMC520 is not set
# CONFIG_EDAC_ZYNQMP is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_HYM8563=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_NCT3018Y is not set
CONFIG_RTC_DRV_RK808=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=m
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_PCF2127=m
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_EFI=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_OPTEE is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
CONFIG_RTC_DRV_CROS_EC=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_IMXDI is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_DRV_MESON_VRTC=m
# CONFIG_RTC_DRV_PL030 is not set
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_ARMADA38X=m
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_PM8XXX=m
CONFIG_RTC_DRV_TEGRA=y
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
CONFIG_RTC_DRV_SNVS=m
# CONFIG_RTC_DRV_BBNSM is not set
CONFIG_RTC_DRV_XGENE=y
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_AMBA_PL08X is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_BCM_SBA_RAID is not set
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
# CONFIG_DW_AXI_DMAC is not set
CONFIG_FSL_EDMA=m
CONFIG_FSL_QDMA=m
# CONFIG_HISI_DMA is not set
# CONFIG_IMX_DMA is not set
CONFIG_IMX_SDMA=m
# CONFIG_INTEL_IDMA64 is not set
CONFIG_K3_DMA=m
CONFIG_MV_XOR=y
CONFIG_MV_XOR_V2=y
# CONFIG_MXS_DMA is not set
CONFIG_MX3_IPU=y
CONFIG_MX3_IPU_IRQS=4
CONFIG_PL330_DMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_TEGRA186_GPC_DMA is not set
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
CONFIG_XGENE_DMA=m
# CONFIG_XILINX_DMA is not set
# CONFIG_XILINX_XDMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
CONFIG_QCOM_BAM_DMA=m
# CONFIG_QCOM_GPI_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_SF_PDMA is not set
# CONFIG_FSL_DPAA2_QDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=m
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO=m
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_MLX5_VFIO_PCI is not set
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_FSL_MC=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_NITRO_ENCLAVES is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_PCI_LIB=m
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_PMEM=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MEM is not set
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_STUB=m
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
# CONFIG_XEN_VIRTIO is not set
# end of Xen driver support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
CONFIG_RTL8723BS=m
CONFIG_R8712U=m
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16240 is not set
# end of Accelerometers
#
# Analog to digital converters
#
# CONFIG_AD7816 is not set
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
# CONFIG_AD2S1210 is not set
# end of Resolver to digital converters
# end of IIO staging drivers
# CONFIG_FB_SM750 is not set
# CONFIG_MFD_NVEC is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AV7110 is not set
# CONFIG_VIDEO_IMX_MEDIA is not set
# CONFIG_VIDEO_IMX8MQ_MIPI_CSI2 is not set
# CONFIG_VIDEO_MAX96712 is not set
CONFIG_VIDEO_MESON_VDEC=m
CONFIG_VIDEO_ROCKCHIP_VDEC=m
CONFIG_VIDEO_SUNXI=y
CONFIG_VIDEO_SUNXI_CEDRUS=m
# CONFIG_VIDEO_SUN6I_ISP is not set
# CONFIG_VIDEO_TEGRA is not set
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_FB_TFT is not set
# CONFIG_KS7010 is not set
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=m
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
CONFIG_BCM2835_VCHIQ_MMAL=m
# CONFIG_PI433 is not set
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
CONFIG_QLGE=m
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=m
# CONFIG_CHROMEOS_TBMC is not set
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
# CONFIG_CROS_EC_RPMSG is not set
CONFIG_CROS_EC_SPI=m
# CONFIG_CROS_EC_UART is not set
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_VBC=m
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC=m
# CONFIG_CROS_HPS_I2C is not set
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
# CONFIG_CHROMEOS_PRIVACY_SCREEN is not set
CONFIG_CROS_TYPEC_SWITCH=m
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
CONFIG_CLK_VEXPRESS_OSC=y
# end of Clock driver for ARM Reference designs
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_HI655X=m
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=m
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_FSL_FLEXSPI=m
CONFIG_COMMON_CLK_FSL_SAI=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_BD718XX is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
CONFIG_CLK_IMX8MQ=y
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PHASE=m
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_SCLK_DIV=m
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
CONFIG_COMMON_CLK_AXG_AUDIO=m
CONFIG_COMMON_CLK_G12A=y
# end of Clock support for Amlogic platforms
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
# CONFIG_QCOM_A53PLL is not set
# CONFIG_QCOM_A7PLL is not set
# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
# CONFIG_QCOM_CLK_APCS_SDX55 is not set
CONFIG_QCOM_CLK_RPM=m
CONFIG_QCOM_CLK_SMD_RPM=m
CONFIG_QCOM_CLK_RPMH=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
# CONFIG_IPQ_APSS_PLL is not set
# CONFIG_IPQ_APSS_6018 is not set
# CONFIG_IPQ_GCC_4019 is not set
# CONFIG_IPQ_GCC_6018 is not set
# CONFIG_IPQ_GCC_806X is not set
# CONFIG_IPQ_LCC_806X is not set
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_MSM_GCC_8660 is not set
# CONFIG_MSM_GCC_8909 is not set
CONFIG_MSM_GCC_8916=y
# CONFIG_MSM_GCC_8939 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MDM_GCC_9607 is not set
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_GCC_8953 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_GCC_8976 is not set
# CONFIG_MSM_MMCC_8994 is not set
# CONFIG_MSM_GCC_8994 is not set
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_GPUCC_8998 is not set
# CONFIG_MSM_MMCC_8998 is not set
# CONFIG_QCM_GCC_2290 is not set
# CONFIG_QCM_DISPCC_2290 is not set
# CONFIG_QCS_GCC_404 is not set
# CONFIG_SC_CAMCC_7180 is not set
# CONFIG_SC_CAMCC_7280 is not set
# CONFIG_SC_DISPCC_7180 is not set
# CONFIG_SC_DISPCC_7280 is not set
# CONFIG_SC_DISPCC_8280XP is not set
# CONFIG_SA_GCC_8775P is not set
# CONFIG_SC_GCC_7180 is not set
# CONFIG_SC_GCC_7280 is not set
# CONFIG_SC_GCC_8180X is not set
# CONFIG_SC_GCC_8280XP is not set
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_GPUCC_7280 is not set
# CONFIG_SC_GPUCC_8280XP is not set
# CONFIG_SC_LPASSCC_7280 is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7280 is not set
# CONFIG_SC_MSS_7180 is not set
# CONFIG_SC_VIDEOCC_7180 is not set
# CONFIG_SC_VIDEOCC_7280 is not set
CONFIG_SDM_CAMCC_845=m
# CONFIG_SDM_GCC_660 is not set
# CONFIG_SDM_MMCC_660 is not set
# CONFIG_SDM_GPUCC_660 is not set
# CONFIG_QCS_TURING_404 is not set
# CONFIG_QCS_Q6SSTOP_404 is not set
# CONFIG_QDU_GCC_1000 is not set
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=m
CONFIG_SDM_VIDEOCC_845=m
CONFIG_SDM_DISPCC_845=m
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDX_GCC_55 is not set
# CONFIG_SDX_GCC_65 is not set
# CONFIG_SM_CAMCC_6350 is not set
# CONFIG_SM_CAMCC_8250 is not set
# CONFIG_SM_CAMCC_8450 is not set
# CONFIG_SM_GCC_6115 is not set
# CONFIG_SM_GCC_6125 is not set
# CONFIG_SM_GCC_6350 is not set
# CONFIG_SM_GCC_6375 is not set
# CONFIG_SM_GCC_8150 is not set
# CONFIG_SM_GCC_8250 is not set
# CONFIG_SM_GCC_8350 is not set
# CONFIG_SM_GCC_8450 is not set
# CONFIG_SM_GCC_8550 is not set
# CONFIG_SM_GPUCC_6350 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
# CONFIG_SM_GPUCC_8350 is not set
# CONFIG_SM_TCSRCC_8550 is not set
# CONFIG_SM_VIDEOCC_8150 is not set
# CONFIG_SM_VIDEOCC_8250 is not set
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_QCOM_HFPLL=y
# CONFIG_KPSS_XCC is not set
# CONFIG_CLK_GFM_LPASS_SM8250 is not set
CONFIG_COMMON_CLK_ROCKCHIP=y
CONFIG_CLK_PX30=y
CONFIG_CLK_RK3308=y
CONFIG_CLK_RK3328=y
CONFIG_CLK_RK3368=y
CONFIG_CLK_RK3399=y
CONFIG_CLK_RK3568=y
CONFIG_CLK_RK3588=y
CONFIG_SUNXI_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN6I_RTC_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_TEGRA_CLK_DFLL=y
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_COMMON_CLK_ZYNQMP=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_ACPI=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ROCKCHIP_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_TEGRA_TIMER=y
# CONFIG_TEGRA186_TIMER is not set
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
CONFIG_ARM_TIMER_SP804=y
CONFIG_TIMER_IMX_SYS_CTR=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=m
# CONFIG_ARM_MHU_V2 is not set
CONFIG_IMX_MBOX=m
CONFIG_PLATFORM_MHU=m
# CONFIG_PL320_MBOX is not set
CONFIG_ARMADA_37XX_RWTM_MBOX=m
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_BCM2835_MBOX=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_QCOM_APCS_IPC=m
# CONFIG_TEGRA_HSP_MBOX is not set
CONFIG_XGENE_SLIMPRO_MBOX=m
CONFIG_ZYNQMP_IPI_MBOX=y
CONFIG_SUN6I_MSGBOX=y
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_IOMMUFD is not set
CONFIG_ROCKCHIP_IOMMU=y
# CONFIG_SUN50I_IOMMU is not set
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARM_SMMU=y
# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
CONFIG_ARM_SMMU_QCOM=y
# CONFIG_ARM_SMMU_QCOM_DEBUG is not set
CONFIG_ARM_SMMU_V3=y
# CONFIG_ARM_SMMU_V3_SVA is not set
CONFIG_QCOM_IOMMU=y
# CONFIG_VIRTIO_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_CTRL is not set
# CONFIG_RPMSG_NS is not set
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=m
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_GX_PM_DOMAINS=y
CONFIG_MESON_EE_PM_DOMAINS=y
CONFIG_MESON_SECURE_PM_DOMAINS=y
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_RASPBERRYPI_POWER=y
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_FSL_DPAA is not set
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_GUTS=y
CONFIG_FSL_MC_DPIO=m
CONFIG_DPAA2_CONSOLE=m
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# CONFIG_A64FX_DIAG is not set
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
CONFIG_IMX8M_BLK_CTRL=y
CONFIG_IMX9_BLK_CTRL=y
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
# CONFIG_QCOM_CPR is not set
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GSBI=m
# CONFIG_QCOM_LLCC is not set
CONFIG_QCOM_KRYO_L2_ACCESSORS=y
CONFIG_QCOM_MDT_LOADER=m
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_PMIC_GLINK is not set
CONFIG_QCOM_QMI_HELPERS=m
# CONFIG_QCOM_RAMP_CTRL is not set
# CONFIG_QCOM_RMTFS_MEM is not set
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_RPMPD=m
CONFIG_QCOM_SMD_RPM=m
# CONFIG_QCOM_SPM is not set
CONFIG_QCOM_WCNSS_CTRL=m
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=m
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
# CONFIG_SUN20I_PPU is not set
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
# CONFIG_ARCH_TEGRA_186_SOC is not set
# CONFIG_ARCH_TEGRA_194_SOC is not set
# CONFIG_ARCH_TEGRA_234_SOC is not set
CONFIG_SOC_TEGRA_FUSE=y
CONFIG_SOC_TEGRA_FLOWCTRL=y
CONFIG_SOC_TEGRA_PMC=y
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
CONFIG_ZYNQMP_POWER=y
CONFIG_ZYNQMP_PM_DOMAINS=y
CONFIG_XLNX_EVENT_MANAGER=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=m
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
CONFIG_ARM_IMX_BUS_DEVFREQ=m
CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
# CONFIG_ARM_TEGRA_DEVFREQ is not set
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_QCOM_SPMI_MISC=m
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
# CONFIG_ARM_PL172_MPMC is not set
CONFIG_TEGRA_MC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
# CONFIG_IIO_CONFIGFS is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
CONFIG_IIO_TRIGGERED_EVENT=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
CONFIG_ADXL345=m
CONFIG_ADXL345_I2C=m
CONFIG_ADXL345_SPI=m
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL355_SPI is not set
# CONFIG_ADXL367_SPI is not set
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA180=m
CONFIG_BMA220=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
# CONFIG_BMI088_ACCEL is not set
CONFIG_DA280=m
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=m
CONFIG_DMARD10=m
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_FXLS8962AF_SPI is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
# CONFIG_IIO_KX022A_SPI is not set
# CONFIG_IIO_KX022A_I2C is not set
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
# CONFIG_MSA311 is not set
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
# CONFIG_SCA3300 is not set
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
# CONFIG_AD4130 is not set
CONFIG_AD7091R5=m
CONFIG_AD7124=m
CONFIG_AD7192=m
CONFIG_AD7266=m
# CONFIG_AD7280 is not set
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
CONFIG_AD7768_1=m
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AD9467=m
CONFIG_ADI_AXI_ADC=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
CONFIG_CC10001_ADC=m
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
# CONFIG_IMX93_ADC is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
CONFIG_MAX1118=m
# CONFIG_MAX11205 is not set
# CONFIG_MAX11410 is not set
CONFIG_MAX1241=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MCP3911=m
CONFIG_MESON_SARADC=m
CONFIG_NAU7802=m
CONFIG_QCOM_VADC_COMMON=m
# CONFIG_QCOM_SPMI_RRADC is not set
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
# CONFIG_QCOM_SPMI_ADC5 is not set
CONFIG_ROCKCHIP_SARADC=m
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
# CONFIG_TI_ADS7924 is not set
CONFIG_TI_ADS7950=m
# CONFIG_TI_ADS8344 is not set
# CONFIG_TI_ADS8688 is not set
# CONFIG_TI_ADS124S08 is not set
# CONFIG_TI_ADS131E08 is not set
# CONFIG_TI_LMP92064 is not set
# CONFIG_TI_TLC4541 is not set
# CONFIG_TI_TSC2046 is not set
# CONFIG_VF610_ADC is not set
CONFIG_VIPERBOARD_ADC=m
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# CONFIG_AD74115 is not set
# CONFIG_AD74413R is not set
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends
#
# Amplifiers
#
# CONFIG_AD8366 is not set
# CONFIG_ADA4250 is not set
# CONFIG_HMC425 is not set
# end of Amplifiers
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
# CONFIG_PMS7003 is not set
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SPS30_SERIAL is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# CONFIG_IIO_SCMI is not set
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
# CONFIG_AD3552R is not set
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
# CONFIG_LTC2688 is not set
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
CONFIG_AD5761=m
CONFIG_AD5764=m
# CONFIG_AD5766 is not set
CONFIG_AD5770R=m
CONFIG_AD5791=m
# CONFIG_AD7293 is not set
CONFIG_AD7303=m
CONFIG_AD8801=m
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_M62332=m
CONFIG_MAX517=m
# CONFIG_MAX5522 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=m
CONFIG_MCP4922=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Filters
#
# CONFIG_ADMV8818 is not set
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
# CONFIG_ADF4371 is not set
# CONFIG_ADF4377 is not set
# CONFIG_ADMV1013 is not set
# CONFIG_ADMV1014 is not set
# CONFIG_ADMV4420 is not set
# CONFIG_ADRF6780 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS290=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=m
# CONFIG_HDC100X is not set
# CONFIG_HDC2010 is not set
# CONFIG_HID_SENSOR_HUMIDITY is not set
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
CONFIG_ADIS16460=m
CONFIG_ADIS16475=m
CONFIG_ADIS16480=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
# CONFIG_BOSCH_BNO055_SERIAL is not set
# CONFIG_BOSCH_BNO055_I2C is not set
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
# CONFIG_CM3605 is not set
CONFIG_CM36651=m
# CONFIG_IIO_CROS_EC_LIGHT_PROX is not set
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_LTR501=m
# CONFIG_LTRF216A is not set
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
# CONFIG_TI_TMAG5273 is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_MCP41010 is not set
# CONFIG_TPL0102 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
# CONFIG_IIO_CROS_EC_BARO is not set
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
# CONFIG_MS5611_SPI is not set
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
# end of Pressure sensors
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_CROS_EC_MKBP_PROXIMITY is not set
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
# CONFIG_SX9500 is not set
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_TMP006=m
CONFIG_TMP007=m
# CONFIG_TMP117 is not set
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
# CONFIG_MAX30208 is not set
CONFIG_MAX31856=m
# CONFIG_MAX31865 is not set
# end of Temperature sensors
# CONFIG_NTB is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL_TCB is not set
CONFIG_PWM_BCM2835=m
# CONFIG_PWM_CLK is not set
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMX1 is not set
CONFIG_PWM_IMX27=m
# CONFIG_PWM_IMX_TPM is not set
CONFIG_PWM_MESON=m
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_RASPBERRYPI_POE=m
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
# CONFIG_PWM_XILINX is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_PM=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
# CONFIG_AL_FIC is not set
CONFIG_BRCMSTB_L2_IRQ=y
CONFIG_HISILICON_IRQ_MBIGEN=y
CONFIG_SL28CPLD_INTC=y
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
# CONFIG_XILINX_INTC is not set
CONFIG_IMX_GPCV2=y
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_LS_EXTIRQ=y
CONFIG_LS_SCFG_MSI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_QCOM_IRQ_COMBINER=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_QCOM_PDC=y
# CONFIG_QCOM_MPM is not set
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=m
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_IMX7=m
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=m
CONFIG_RESET_QCOM_AOSS=y
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RESET_RASPBERRYPI=m
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_XGENE=m
# CONFIG_PHY_CAN_TRANSCEIVER is not set
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_SUN6I_MIPI_DPHY=m
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
CONFIG_PHY_MESON8B_USB2=m
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
CONFIG_PHY_FSL_IMX8MQ_USB=m
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=m
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=m
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
CONFIG_PHY_MVEBU_A3700_COMPHY=m
CONFIG_PHY_MVEBU_A3700_UTMI=m
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_MVEBU_CP110_COMPHY=m
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_CPCAP_USB is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_QCOM_APQ8064_SATA=m
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=m
# CONFIG_PHY_QCOM_PCIE2 is not set
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QMP_COMBO=m
CONFIG_PHY_QCOM_QMP_PCIE=m
CONFIG_PHY_QCOM_QMP_PCIE_8996=m
CONFIG_PHY_QCOM_QMP_UFS=m
CONFIG_PHY_QCOM_QMP_USB=m
CONFIG_PHY_QCOM_QUSB2=m
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
CONFIG_PHY_QCOM_USB_HS=m
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
CONFIG_PHY_QCOM_USB_HSIC=m
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
CONFIG_PHY_ROCKCHIP_DP=m
CONFIG_PHY_ROCKCHIP_DPHY_RX0=m
CONFIG_PHY_ROCKCHIP_EMMC=m
CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_INNO_USB2=m
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=m
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=m
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=m
CONFIG_PHY_ROCKCHIP_TYPEC=m
CONFIG_PHY_ROCKCHIP_USB=m
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_TEGRA_XUSB=m
# CONFIG_PHY_TUSB1210 is not set
CONFIG_PHY_XILINX_ZYNQMP=m
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CCI400_PMU=y
CONFIG_ARM_CCI5xx_PMU=y
CONFIG_ARM_CCN=m
CONFIG_ARM_CMN=m
CONFIG_ARM_PMU=y
CONFIG_ARM_PMU_ACPI=y
CONFIG_ARM_SMMU_V3_PMU=m
CONFIG_ARM_DSU_PMU=m
CONFIG_FSL_IMX8_DDR_PMU=m
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
CONFIG_THUNDERX2_PMU=m
CONFIG_XGENE_PMU=y
CONFIG_ARM_SPE_PMU=m
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
CONFIG_HISI_PMU=y
# CONFIG_HISI_PCIE_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU is not set
# CONFIG_MESON_DDR_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_OF_PMEM=m
CONFIG_NVDIMM_KEYS=y
# CONFIG_NVDIMM_SECURITY_TEST is not set
CONFIG_DAX=m
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_HMEM=m
CONFIG_DEV_DAX_CXL=m
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_IMX_IIM is not set
CONFIG_NVMEM_IMX_OCOTP=m
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
CONFIG_NVMEM_MESON_EFUSE=m
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
CONFIG_NVMEM_QCOM_QFPROM=m
# CONFIG_NVMEM_RMEM is not set
CONFIG_NVMEM_ROCKCHIP_EFUSE=m
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
CONFIG_NVMEM_SUNXI_SID=m
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_ZYNQMP is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_HISI_PTT is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_TEE=m
CONFIG_OPTEE=m
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_ADGS1408 is not set
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=m
# CONFIG_SLIM_QCOM_CTRL is not set
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
# CONFIG_INTERCONNECT_IMX8MM is not set
# CONFIG_INTERCONNECT_IMX8MN is not set
CONFIG_INTERCONNECT_IMX8MQ=m
# CONFIG_INTERCONNECT_IMX8MP is not set
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_BCM_VOTER=y
# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
# CONFIG_INTERCONNECT_QCOM_MSM8939 is not set
# CONFIG_INTERCONNECT_QCOM_MSM8974 is not set
# CONFIG_INTERCONNECT_QCOM_MSM8996 is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_QCOM_QCM2290 is not set
# CONFIG_INTERCONNECT_QCOM_QCS404 is not set
# CONFIG_INTERCONNECT_QCOM_QDU1000 is not set
CONFIG_INTERCONNECT_QCOM_RPMH_POSSIBLE=y
CONFIG_INTERCONNECT_QCOM_RPMH=y
# CONFIG_INTERCONNECT_QCOM_SA8775P is not set
# CONFIG_INTERCONNECT_QCOM_SC7180 is not set
# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
# CONFIG_INTERCONNECT_QCOM_SC8180X is not set
# CONFIG_INTERCONNECT_QCOM_SC8280XP is not set
# CONFIG_INTERCONNECT_QCOM_SDM660 is not set
# CONFIG_INTERCONNECT_QCOM_SDM670 is not set
CONFIG_INTERCONNECT_QCOM_SDM845=y
# CONFIG_INTERCONNECT_QCOM_SDX55 is not set
# CONFIG_INTERCONNECT_QCOM_SDX65 is not set
# CONFIG_INTERCONNECT_QCOM_SM6350 is not set
# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
# CONFIG_INTERCONNECT_QCOM_SM8550 is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_ZONEFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=m
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set
CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
# CONFIG_EROFS_FS_ZIP_LZMA is not set
# CONFIG_EROFS_FS_PCPU_KTHREAD is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_KRB5_CRYPTOSYSTEM=y
# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_DES is not set
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y
# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set
# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_SMB_DIRECT is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_SMB_SERVER=m
# CONFIG_SMB_SERVER_SMBDIRECT is not set
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
# CONFIG_SMB_SERVER_KERBEROS5 is not set
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEPRECATED_API is not set
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=32768
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_MACHINE_KEYRING=y
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_NG_TEMPLATE is not set
CONFIG_IMA_SIG_TEMPLATE=y
CONFIG_IMA_DEFAULT_TEMPLATE="ima-sig"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
CONFIG_IMA_DEFAULT_HASH="sha256"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=m
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=m
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_SIMD=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_NHPOLY1305_NEON=m
CONFIG_CRYPTO_CHACHA20_NEON=m
#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
CONFIG_CRYPTO_GHASH_ARM64_CE=m
CONFIG_CRYPTO_POLY1305_NEON=m
CONFIG_CRYPTO_SHA1_ARM64_CE=m
CONFIG_CRYPTO_SHA256_ARM64=m
CONFIG_CRYPTO_SHA2_ARM64_CE=m
CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=m
# CONFIG_CRYPTO_SM3_NEON is not set
# CONFIG_CRYPTO_SM3_ARM64_CE is not set
CONFIG_CRYPTO_POLYVAL_ARM64_CE=m
# CONFIG_CRYPTO_AES_ARM64 is not set
CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_AES_ARM64_BS=m
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
CONFIG_CRYPTO_AES_ARM64_CE_CCM=m
# CONFIG_CRYPTO_SM4_ARM64_CE_CCM is not set
# CONFIG_CRYPTO_SM4_ARM64_CE_GCM is not set
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
# end of Accelerated Cryptographic Algorithms for CPU (arm64)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
# CONFIG_CRYPTO_DEV_SUN4I_SS is not set
CONFIG_CRYPTO_DEV_SUN8I_CE=m
# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE_HASH is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG is not set
# CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG is not set
# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=m
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=m
CONFIG_CRYPTO_DEV_FSL_CAAM=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
# CONFIG_CRYPTO_DEV_SAHARA is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_MXS_DCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_CPT=m
CONFIG_CAVIUM_CPT=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
CONFIG_CRYPTO_DEV_MARVELL=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_AEAD=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=m
CONFIG_CRYPTO_DEV_ROCKCHIP=m
# CONFIG_CRYPTO_DEV_ROCKCHIP_DEBUG is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_INDIRECT_PIO=y
# CONFIG_TRACE_MMIO_ACCESS is not set
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC64_ROCKSOFT=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_RESTRICTED_POOL is not set
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_TER16x32=y
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_PLDMFW=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
CONFIG_MODULE_ALLOW_BTF_MISMATCH=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_HW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_DEBUG_EFI is not set
# CONFIG_ARM64_RELOC_TEST is not set
CONFIG_CORESIGHT=m
CONFIG_CORESIGHT_LINKS_AND_SINKS=m
# CONFIG_CORESIGHT_LINK_AND_SINK_TMC is not set
# CONFIG_CORESIGHT_SINK_TPIU is not set
# CONFIG_CORESIGHT_SINK_ETBV10 is not set
CONFIG_CORESIGHT_SOURCE_ETM4X=m
# CONFIG_ETM4X_IMPDEF_FEATURE is not set
# CONFIG_CORESIGHT_STM is not set
# CONFIG_CORESIGHT_CPU_DEBUG is not set
# CONFIG_CORESIGHT_CTI is not set
CONFIG_CORESIGHT_TRBE=m
# CONFIG_ULTRASOC_SMB is not set
# CONFIG_CORESIGHT_TPDM is not set
# CONFIG_CORESIGHT_TPDA is not set
# end of arm64 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
CONFIG_TEST_FIRMWARE=m
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-13 20:06 ` Cyril Brulebois
@ 2023-04-14 12:14 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 12:14 UTC (permalink / raw)
To: Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
>
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
> > Can you provide (a) the full boot log prior to applying the patch
> > series and (b) full boot log after applying the series, using an
> > IDENTICAL setup. If it fails on both then it has little to do with my
> > patch series.
>
> Just to be clear, the issue I reported was with:
> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> This was my minimal reproducer for the kernel panic at boot-up, which
> goes away with either v1 or v2. When I realized I didn't actually check
> whether the SupaHub board was working correctly, I plugged 2 devices to
> obtain this setup:
> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
>
> It turns out that this particular revision of the SupaHub board isn't
> supported by xhci_hcd directly (failing to probe with error -110) and
> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
> updated kernel config, I'm able to use the keyboard and to read data
> from the memory stick without problems (70 MB/s).
>
> > In my last series your testing somehow conflated the effect of an
> > unrelated MMC interrupt issue so please be precise.
>
> I wish things would be simpler and didn't involve combinatorics, let
> alone other bugs/regressions at times, but I'm really trying my best to
> navigate and report issues and test patches when I can spare some time…
Hi Cyril,
I want to encourage you and others doing testing and bug reporting:
everyone wins when a bug or issue is reported, fixed, and tested.
I'm just asking that when you have negative results, that you provide
information on the "before" and "after" test results of
the patch series, and run both on the same test environment.
Regards,
Jim Quinlan
Broadcom STB
>
>
> In my defence, the very similar board PCE6U1C-R02, VER 006 boots without
> a kernel panic, and works fine with xhci_hcd without that extra module
> and its firmware. It's based on the exact same chip (Renesas Technology
> Corp. uPD720201) though, that's why I didn't realize the need for an
> extra module until now for the PCE6U1C-R02, VER 006S one. (Florian,
> thanks for mentioning .config earlier…)
>
> To sum up, it seems both (sub)versions of that SupaHub PCE6U1C-R02 board
> are usable with this patch series: the kernel panic at boot-up is gone,
> and USB devices plugged into those boards are working as expected.
>
>
> But, speaking of combinatorics, while the patch series helps fix
> https://bugzilla.kernel.org/show_bug.cgi?id=217276 on that particular
> initial combination of CM4 and SupaHub PCE6U1C-R02, VER 006S, it also
> generates a regression if I use a different CM4…
>
> Setup:
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> You'll find attached (a) and (b) as requested above, for this setup, as
> well as the kernel configuration file:
> - (a) = dmesg-unpatched.txt = boots fine (and USB devices work fine if
> memory sticks or keyboards are plugged in).
> - (b) = dmesg-patched.txt = kernel panic.
> - cm4+pcie.config
>
> I'm getting similar results with the other SupaHub board:
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006
>
>
> This is probably best summarized this way:
>
> | unpatched | patched
> ------------------------------+--------------+--------------
> CM4 Rev 1.1 4G/32G + VER 006 | OK | OK
> CM4 Rev 1.1 4G/32G + VER 006S | Kernel panic | OK ← Bugzilla entry
> CM4 Rev 1.0 8G/32G + VER 006 | OK | Kernel panic
> CM4 Rev 1.0 8G/32G + VER 006S | OK | Kernel panic
>
>
> (And I'm of course using the same settings regarding the serial console,
> to get traces when needed.)
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 12:14 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 12:14 UTC (permalink / raw)
To: Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
>
> Hi Jim,
>
> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
> > Can you provide (a) the full boot log prior to applying the patch
> > series and (b) full boot log after applying the series, using an
> > IDENTICAL setup. If it fails on both then it has little to do with my
> > patch series.
>
> Just to be clear, the issue I reported was with:
> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> This was my minimal reproducer for the kernel panic at boot-up, which
> goes away with either v1 or v2. When I realized I didn't actually check
> whether the SupaHub board was working correctly, I plugged 2 devices to
> obtain this setup:
> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
>
> It turns out that this particular revision of the SupaHub board isn't
> supported by xhci_hcd directly (failing to probe with error -110) and
> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
> updated kernel config, I'm able to use the keyboard and to read data
> from the memory stick without problems (70 MB/s).
>
> > In my last series your testing somehow conflated the effect of an
> > unrelated MMC interrupt issue so please be precise.
>
> I wish things would be simpler and didn't involve combinatorics, let
> alone other bugs/regressions at times, but I'm really trying my best to
> navigate and report issues and test patches when I can spare some time…
Hi Cyril,
I want to encourage you and others doing testing and bug reporting:
everyone wins when a bug or issue is reported, fixed, and tested.
I'm just asking that when you have negative results, that you provide
information on the "before" and "after" test results of
the patch series, and run both on the same test environment.
Regards,
Jim Quinlan
Broadcom STB
>
>
> In my defence, the very similar board PCE6U1C-R02, VER 006 boots without
> a kernel panic, and works fine with xhci_hcd without that extra module
> and its firmware. It's based on the exact same chip (Renesas Technology
> Corp. uPD720201) though, that's why I didn't realize the need for an
> extra module until now for the PCE6U1C-R02, VER 006S one. (Florian,
> thanks for mentioning .config earlier…)
>
> To sum up, it seems both (sub)versions of that SupaHub PCE6U1C-R02 board
> are usable with this patch series: the kernel panic at boot-up is gone,
> and USB devices plugged into those boards are working as expected.
>
>
> But, speaking of combinatorics, while the patch series helps fix
> https://bugzilla.kernel.org/show_bug.cgi?id=217276 on that particular
> initial combination of CM4 and SupaHub PCE6U1C-R02, VER 006S, it also
> generates a regression if I use a different CM4…
>
> Setup:
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> You'll find attached (a) and (b) as requested above, for this setup, as
> well as the kernel configuration file:
> - (a) = dmesg-unpatched.txt = boots fine (and USB devices work fine if
> memory sticks or keyboards are plugged in).
> - (b) = dmesg-patched.txt = kernel panic.
> - cm4+pcie.config
>
> I'm getting similar results with the other SupaHub board:
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006
>
>
> This is probably best summarized this way:
>
> | unpatched | patched
> ------------------------------+--------------+--------------
> CM4 Rev 1.1 4G/32G + VER 006 | OK | OK
> CM4 Rev 1.1 4G/32G + VER 006S | Kernel panic | OK ← Bugzilla entry
> CM4 Rev 1.0 8G/32G + VER 006 | OK | Kernel panic
> CM4 Rev 1.0 8G/32G + VER 006S | OK | Kernel panic
>
>
> (And I'm of course using the same settings regarding the serial console,
> to get traces when needed.)
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 12:14 ` Jim Quinlan
@ 2023-04-14 12:27 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-14 12:27 UTC (permalink / raw)
To: Jim Quinlan, Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/14/2023 5:14 AM, Jim Quinlan wrote:
> On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
>>
>> Hi Jim,
>>
>> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
>>> Can you provide (a) the full boot log prior to applying the patch
>>> series and (b) full boot log after applying the series, using an
>>> IDENTICAL setup. If it fails on both then it has little to do with my
>>> patch series.
>>
>> Just to be clear, the issue I reported was with:
>> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
>> - Raspberry Pi Compute Module 4 IO Board
>> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>>
>> This was my minimal reproducer for the kernel panic at boot-up, which
>> goes away with either v1 or v2. When I realized I didn't actually check
>> whether the SupaHub board was working correctly, I plugged 2 devices to
>> obtain this setup:
>> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
>> - Raspberry Pi Compute Module 4 IO Board
>> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
>> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
>>
>> It turns out that this particular revision of the SupaHub board isn't
>> supported by xhci_hcd directly (failing to probe with error -110) and
>> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
>> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
>> updated kernel config, I'm able to use the keyboard and to read data
>> from the memory stick without problems (70 MB/s).
>>
>>> In my last series your testing somehow conflated the effect of an
>>> unrelated MMC interrupt issue so please be precise.
>>
>> I wish things would be simpler and didn't involve combinatorics, let
>> alone other bugs/regressions at times, but I'm really trying my best to
>> navigate and report issues and test patches when I can spare some time…
>
> Hi Cyril,
>
> I want to encourage you and others doing testing and bug reporting:
> everyone wins when a bug or issue is reported, fixed, and tested.
> I'm just asking that when you have negative results, that you provide
> information on the "before" and "after" test results of
> the patch series, and run both on the same test environment.
Cyril, based upon the table and logs you provided whereby you have used
the following:
- Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
in the before/unpatched case we have a PCIe link down and in the
after/patched we have a PCIe link up but a kernel panic. Neither are
great nor resulting in a fully functional PCIe device.
Looking at:
https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
it would appear that it can accept an external power supply, do you have
one connected to that USB expansion card by any chance? Are you able to
boot the kernel before/after if you disconnect any USB peripheral?
This looks like a broader electrical problem than the scope of this
patch, though it would be neat if we could find a combination that
works. At least with Jim's patch we have a PCIe link with
uni-directional CLKREQ# so we could try a variety of things.
Does that SupaHub board plugged to the CM4 1.0 system work fine in the
Raspberry Pi kernel tree?
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 12:27 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-14 12:27 UTC (permalink / raw)
To: Jim Quinlan, Cyril Brulebois
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Florian Fainelli, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/14/2023 5:14 AM, Jim Quinlan wrote:
> On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
>>
>> Hi Jim,
>>
>> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
>>> Can you provide (a) the full boot log prior to applying the patch
>>> series and (b) full boot log after applying the series, using an
>>> IDENTICAL setup. If it fails on both then it has little to do with my
>>> patch series.
>>
>> Just to be clear, the issue I reported was with:
>> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
>> - Raspberry Pi Compute Module 4 IO Board
>> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>>
>> This was my minimal reproducer for the kernel panic at boot-up, which
>> goes away with either v1 or v2. When I realized I didn't actually check
>> whether the SupaHub board was working correctly, I plugged 2 devices to
>> obtain this setup:
>> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
>> - Raspberry Pi Compute Module 4 IO Board
>> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
>> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
>>
>> It turns out that this particular revision of the SupaHub board isn't
>> supported by xhci_hcd directly (failing to probe with error -110) and
>> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
>> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
>> updated kernel config, I'm able to use the keyboard and to read data
>> from the memory stick without problems (70 MB/s).
>>
>>> In my last series your testing somehow conflated the effect of an
>>> unrelated MMC interrupt issue so please be precise.
>>
>> I wish things would be simpler and didn't involve combinatorics, let
>> alone other bugs/regressions at times, but I'm really trying my best to
>> navigate and report issues and test patches when I can spare some time…
>
> Hi Cyril,
>
> I want to encourage you and others doing testing and bug reporting:
> everyone wins when a bug or issue is reported, fixed, and tested.
> I'm just asking that when you have negative results, that you provide
> information on the "before" and "after" test results of
> the patch series, and run both on the same test environment.
Cyril, based upon the table and logs you provided whereby you have used
the following:
- Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
- Raspberry Pi Compute Module 4 IO Board
- SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
in the before/unpatched case we have a PCIe link down and in the
after/patched we have a PCIe link up but a kernel panic. Neither are
great nor resulting in a fully functional PCIe device.
Looking at:
https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
it would appear that it can accept an external power supply, do you have
one connected to that USB expansion card by any chance? Are you able to
boot the kernel before/after if you disconnect any USB peripheral?
This looks like a broader electrical problem than the scope of this
patch, though it would be neat if we could find a combination that
works. At least with Jim's patch we have a PCIe link with
uni-directional CLKREQ# so we could try a variety of things.
Does that SupaHub board plugged to the CM4 1.0 system work fine in the
Raspberry Pi kernel tree?
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 12:27 ` Florian Fainelli
@ 2023-04-14 13:31 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 13:31 UTC (permalink / raw)
To: Florian Fainelli
Cc: Cyril Brulebois, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 8:27 AM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
>
>
> On 4/14/2023 5:14 AM, Jim Quinlan wrote:
> > On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
> >>
> >> Hi Jim,
> >>
> >> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
> >>> Can you provide (a) the full boot log prior to applying the patch
> >>> series and (b) full boot log after applying the series, using an
> >>> IDENTICAL setup. If it fails on both then it has little to do with my
> >>> patch series.
> >>
> >> Just to be clear, the issue I reported was with:
> >> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> >> - Raspberry Pi Compute Module 4 IO Board
> >> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >>
> >> This was my minimal reproducer for the kernel panic at boot-up, which
> >> goes away with either v1 or v2. When I realized I didn't actually check
> >> whether the SupaHub board was working correctly, I plugged 2 devices to
> >> obtain this setup:
> >> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> >> - Raspberry Pi Compute Module 4 IO Board
> >> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
> >> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
> >>
> >> It turns out that this particular revision of the SupaHub board isn't
> >> supported by xhci_hcd directly (failing to probe with error -110) and
> >> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
> >> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
> >> updated kernel config, I'm able to use the keyboard and to read data
> >> from the memory stick without problems (70 MB/s).
> >>
> >>> In my last series your testing somehow conflated the effect of an
> >>> unrelated MMC interrupt issue so please be precise.
> >>
> >> I wish things would be simpler and didn't involve combinatorics, let
> >> alone other bugs/regressions at times, but I'm really trying my best to
> >> navigate and report issues and test patches when I can spare some time…
> >
> > Hi Cyril,
> >
> > I want to encourage you and others doing testing and bug reporting:
> > everyone wins when a bug or issue is reported, fixed, and tested.
> > I'm just asking that when you have negative results, that you provide
> > information on the "before" and "after" test results of
> > the patch series, and run both on the same test environment.
>
> Cyril, based upon the table and logs you provided whereby you have used
> the following:
>
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> in the before/unpatched case we have a PCIe link down and in the
> after/patched we have a PCIe link up but a kernel panic. Neither are
> great nor resulting in a fully functional PCIe device.
The data do not make sense to me. My new code is executed AFTER pcie
link up/down determination. Both test results should have the same
link status -- either "link up" or "link down".
If the system is wishy-washy, i.e. it has link-up in 5/10 boots, then
we need to repeat the experiment to compare the "link up" cases only.
Or discount the test completely
If the system is not wishy-washy, then something has been changed
between the "before" and "after" tests.
>
> Looking at:
>
> https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
>
> it would appear that it can accept an external power supply, do you have
> one connected to that USB expansion card by any chance? Are you able to
> boot the kernel before/after if you disconnect any USB peripheral?
>
> This looks like a broader electrical problem than the scope of this
> patch, though it would be neat if we could find a combination that
> works. At least with Jim's patch we have a PCIe link with
> uni-directional CLKREQ# so we could try a variety of things.
>
> Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> Raspberry Pi kernel tree?
> --
> Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 13:31 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 13:31 UTC (permalink / raw)
To: Florian Fainelli
Cc: Cyril Brulebois, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 8:27 AM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
>
>
> On 4/14/2023 5:14 AM, Jim Quinlan wrote:
> > On Thu, Apr 13, 2023 at 4:06 PM Cyril Brulebois <kibi@debian.org> wrote:
> >>
> >> Hi Jim,
> >>
> >> Jim Quinlan <jim2101024@gmail.com> (2023-04-13):
> >>> Can you provide (a) the full boot log prior to applying the patch
> >>> series and (b) full boot log after applying the series, using an
> >>> IDENTICAL setup. If it fails on both then it has little to do with my
> >>> patch series.
> >>
> >> Just to be clear, the issue I reported was with:
> >> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> >> - Raspberry Pi Compute Module 4 IO Board
> >> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >>
> >> This was my minimal reproducer for the kernel panic at boot-up, which
> >> goes away with either v1 or v2. When I realized I didn't actually check
> >> whether the SupaHub board was working correctly, I plugged 2 devices to
> >> obtain this setup:
> >> - Raspberry Pi Compute Module 4 (Rev 1.1, 4G RAM, 32G storage)
> >> - Raspberry Pi Compute Module 4 IO Board
> >> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >> - Kingston DataTraveler G4 32GB on USB-A port #1 of the SupaHub board.
> >> - Logitech K120 keyboard on USB-A port #2 of the SupaHub board.
> >>
> >> It turns out that this particular revision of the SupaHub board isn't
> >> supported by xhci_hcd directly (failing to probe with error -110) and
> >> one needs to enable CONFIG_USB_XHCI_PCI_RENESAS=m and also ship its
> >> accompanying firmware (/lib/firmware/renesas_usb_fw.mem). With this
> >> updated kernel config, I'm able to use the keyboard and to read data
> >> from the memory stick without problems (70 MB/s).
> >>
> >>> In my last series your testing somehow conflated the effect of an
> >>> unrelated MMC interrupt issue so please be precise.
> >>
> >> I wish things would be simpler and didn't involve combinatorics, let
> >> alone other bugs/regressions at times, but I'm really trying my best to
> >> navigate and report issues and test patches when I can spare some time…
> >
> > Hi Cyril,
> >
> > I want to encourage you and others doing testing and bug reporting:
> > everyone wins when a bug or issue is reported, fixed, and tested.
> > I'm just asking that when you have negative results, that you provide
> > information on the "before" and "after" test results of
> > the patch series, and run both on the same test environment.
>
> Cyril, based upon the table and logs you provided whereby you have used
> the following:
>
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> in the before/unpatched case we have a PCIe link down and in the
> after/patched we have a PCIe link up but a kernel panic. Neither are
> great nor resulting in a fully functional PCIe device.
The data do not make sense to me. My new code is executed AFTER pcie
link up/down determination. Both test results should have the same
link status -- either "link up" or "link down".
If the system is wishy-washy, i.e. it has link-up in 5/10 boots, then
we need to repeat the experiment to compare the "link up" cases only.
Or discount the test completely
If the system is not wishy-washy, then something has been changed
between the "before" and "after" tests.
>
> Looking at:
>
> https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
>
> it would appear that it can accept an external power supply, do you have
> one connected to that USB expansion card by any chance? Are you able to
> boot the kernel before/after if you disconnect any USB peripheral?
>
> This looks like a broader electrical problem than the scope of this
> patch, though it would be neat if we could find a combination that
> works. At least with Jim's patch we have a PCIe link with
> uni-directional CLKREQ# so we could try a variety of things.
>
> Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> Raspberry Pi kernel tree?
> --
> Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 12:27 ` Florian Fainelli
@ 2023-04-14 16:19 ` Cyril Brulebois
-1 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-14 16:19 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1: Type: text/plain, Size: 3007 bytes --]
Florian Fainelli <f.fainelli@gmail.com> (2023-04-14):
> Cyril, based upon the table and logs you provided whereby you have used the
> following:
>
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> in the before/unpatched case we have a PCIe link down and in the
> after/patched we have a PCIe link up but a kernel panic. Neither are great
> nor resulting in a fully functional PCIe device.
Based on Jim's feedback, I'm attaching a new dmesg for the aforementioned
setup, with an unpatched kernel (dmesg-unpatched-pcie-link-up.txt).
I fear that initially I might have not waited enough before power off and
power on when replugging the SupaHub adapter, and I've only seen the PCIe
link down a few times (now that I'm actively paying attention to that
part). I'm indeed seeing PCIe link up consistently (100%) when using the
following method:
for i in $(seq 1 20); do
# power on, let the system boot up and settle:
sispmctl -t 4; sleep 2m
ssh cm4 sh -c "dmesg > dmesg-$i.txt; poweroff"
# let the system power down, and power off:
sleep 30; sispmctl -t 4
# wait before power cycling:
sleep 10
done
> Looking at:
> https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
>
> it would appear that it can accept an external power supply, do you have one
> connected to that USB expansion card by any chance?
With the patched kernel, I have tried several things (leaving the regular
12V adapter plugged in all the time):
- No external power supply (that's what I've been using in all previous
attempts).
- Using a 5V PSU with 2 pins (ground and 5V) plugged on the Ext PSU
4-pin header on the IO Board.
- Using a 5V PSU with a SATA connector plugged directly onto the SupaHub
adapter.
I'm getting the same trace in all cases.
> Are you able to boot the kernel before/after if you disconnect any USB
> peripheral?
The trace is obtained without any USB peripheral (on the extension card or
on the onboard USB slots). Besides the SupaHub adapter on the PCIe slot, I
only have Ethernet and HDMI plugged in (I'm getting traces via serial
console, and operating the system over SSH when it boots fine).
As soon as I unplug the SupaHub board itself, the system boots fine.
> Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> Raspberry Pi kernel tree?
With the Raspberry Pi OS (64-bit) > Raspberry Pi OS Lite image
(2023-02-21-raspios-bullseye-arm64-lite.img.xz), the system at least
boots fine; I haven't tried adding devices to the mix just yet, trying
to stick with that particular setup.
A full dmesg is attached (dmesg-raspios.txt).
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.2: dmesg-unpatched-pcie-link-up.txt --]
[-- Type: text/plain, Size: 32861 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.3.0-rc6+ (kibi@genova) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 13 20:03:01 CEST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef625a0..0x000000003ef626d0 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff00c280-0x1ff00efff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s88232 r8192 d30552 u126976
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03140 bcm2709.serial=0x751d0632 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3987300K/8245248K available (13440K kernel code, 2774K rwdata, 8248K rodata, 6528K init, 607K bss, 290288K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43928 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008293] Console: colour dummy device 80x25
[ 0.012831] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.023383] pid_max: default: 32768 minimum: 301
[ 0.028104] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor,tomoyo,bpf
[ 0.037094] landlock: Up and running.
[ 0.040785] Yama: becoming mindful.
[ 0.044391] AppArmor: AppArmor initialized
[ 0.048529] TOMOYO Linux initialized
[ 0.052150] LSM support for eBPF active
[ 0.056115] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063811] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073125] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.080449] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.086656] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.092943] rcu: Hierarchical SRCU implementation.
[ 0.097782] rcu: Max phase no-delay instances is 1000.
[ 0.104118] EFI services will not be available.
[ 0.109030] smp: Bringing up secondary CPUs ...
[ 0.113978] Detected PIPT I-cache on CPU1
[ 0.114047] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.114421] Detected PIPT I-cache on CPU2
[ 0.114457] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.114822] Detected PIPT I-cache on CPU3
[ 0.114857] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.114898] smp: Brought up 1 node, 4 CPUs
[ 0.150939] SMP: Total of 4 processors activated.
[ 0.155688] CPU features: detected: 32-bit EL0 Support
[ 0.160873] CPU features: detected: 32-bit EL1 Support
[ 0.166062] CPU features: detected: CRC32 instructions
[ 0.171305] CPU: All CPU(s) started at EL2
[ 0.175448] alternatives: applying system-wide alternatives
[ 0.258167] node 0 deferred pages initialised in 76ms
[ 0.264630] devtmpfs: initialized
[ 0.273248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.283148] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291457] pinctrl core: initialized pinctrl subsystem
[ 0.297614] DMI not present or invalid.
[ 0.301833] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.309143] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.316833] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.325692] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.333817] audit: initializing netlink subsys (disabled)
[ 0.339412] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[ 0.339957] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347244] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.353398] thermal_sys: Registered thermal governor 'step_wise'
[ 0.359463] thermal_sys: Registered thermal governor 'user_space'
[ 0.365528] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.371707] cpuidle: using governor ladder
[ 0.382439] cpuidle: using governor menu
[ 0.386517] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.393433] ASID allocator initialised with 32768 entries
[ 0.399130] Serial: AMBA PL011 UART driver
[ 0.410262] KASLR enabled
[ 0.413665] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.420530] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.426862] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.433717] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.440046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.446900] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.453229] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.460083] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.467546] ACPI: Interpreter disabled.
[ 0.471664] iommu: Default domain type: Translated
[ 0.476593] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.483082] EDAC MC: Ver: 3.0.0
[ 0.486519] scmi_core: SCMI protocol bus registered
[ 0.492029] NetLabel: Initializing
[ 0.495466] NetLabel: domain hash size = 128
[ 0.499863] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.505611] NetLabel: unlabeled traffic allowed by default
[ 0.511374] vgaarb: loaded
[ 0.514332] clocksource: Switched to clocksource arch_sys_counter
[ 0.549785] VFS: Disk quotas dquot_6.6.0
[ 0.553806] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.561228] AppArmor: AppArmor Filesystem Enabled
[ 0.566034] pnp: PnP ACPI: disabled
[ 0.573512] NET: Registered PF_INET protocol family
[ 0.578927] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.590470] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.599270] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.607308] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.616322] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.626439] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.633407] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.641344] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.648308] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.655786] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.661535] NET: Registered PF_XDP protocol family
[ 0.666384] PCI: CLS 0 bytes, default 64
[ 0.670609] Trying to unpack rootfs image as initramfs...
[ 0.676170] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.684669] kvm [1]: IPA Size Limit: 44 bits
[ 0.690004] kvm [1]: vgic interrupt IRQ9
[ 0.694037] kvm [1]: Hyp mode initialized successfully
[ 0.700409] Initialise system trusted keyrings
[ 0.704985] Key type blacklist registered
[ 0.709327] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.716008] zbud: loaded
[ 0.719171] integrity: Platform Keyring initialized
[ 0.724197] integrity: Machine keyring initialized
[ 0.729077] Key type asymmetric registered
[ 0.733224] Asymmetric key parser 'x509' registered
[ 1.675267] Freeing initrd memory: 31880K
[ 1.692974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.700551] io scheduler mq-deadline registered
[ 1.707175] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 1.720146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.727354] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.734395] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.743554] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.751740] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.760548] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.766887] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.772430] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.782907] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.789018] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.904371] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.910823] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.916913] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.923886] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.938371] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 1.945500] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.953074] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.958095] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.965230] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.971458] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 1.977465] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 1.983179] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.988927] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.996862] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896177 usecs
[ 7.005184] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes
[ 7.013892] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 7.026754] Console: switching to colour frame buffer device 228x61
[ 7.036135] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered!
[ 7.048696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.056025] printk: console [ttyS1] disabled
[ 7.060403] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62499999) is a 16550
[ 7.069404] printk: console [ttyS1] enabled
[ 7.077886] printk: bootconsole [bcm2835aux0] disabled
[ 7.088802] Serial: AMBA driver
[ 7.092199] msm_serial: driver initialized
[ 7.097592] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 7.105367] mousedev: PS/2 mouse device common for all mice
[ 7.111592] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 7.118682] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 7.126399] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.133020] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 7.156951] NET: Registered PF_INET6 protocol family
[ 7.174534] Segment Routing with IPv6
[ 7.178286] In-situ OAM (IOAM) with IPv6
[ 7.182323] mip6: Mobile IPv6
[ 7.185345] NET: Registered PF_PACKET protocol family
[ 7.190549] mpls_gso: MPLS GSO support
[ 7.197394] registered taskstats version 1
[ 7.201792] Loading compiled-in X.509 certificates
[ 7.244632] Loaded X.509 cert 'Build time autogenerated kernel key: 83983db0a2e3422ed1c09ac9326e286f87dd9c0e'
[ 7.256299] zswap: loaded using pool lzo/zbud
[ 7.264462] Key type .fscrypt registered
[ 7.268454] Key type fscrypt-provisioning registered
[ 7.285473] Key type encrypted registered
[ 7.289560] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.295146] ima: No TPM chip found, activating TPM-bypass!
[ 7.300722] ima: Allocated hash algorithm: sha256
[ 7.305517] ima: No architecture policies found
[ 7.310133] evm: Initialising EVM extended attributes:
[ 7.315340] evm: security.selinux
[ 7.318697] evm: security.SMACK64 (disabled)
[ 7.323022] evm: security.SMACK64EXEC (disabled)
[ 7.327699] evm: security.SMACK64TRANSMUTE (disabled)
[ 7.332818] evm: security.SMACK64MMAP (disabled)
[ 7.337495] evm: security.apparmor
[ 7.340939] evm: security.ima
[ 7.343942] evm: security.capability
[ 7.347562] evm: HMAC attrs: 0x1
[ 7.556359] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
[ 7.565687] serial serial0: tty port ttyAMA0 registered
[ 7.571649] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16
[ 7.581835] gpio-573 (ant1): hogged as output/high
[ 7.587958] gpio-577 (ant2): hogged as output/low
[ 7.605203] Freeing unused kernel memory: 6528K
[ 7.660804] Checked W+X mappings: passed, no W+X pages found
[ 7.666581] Run /init as init process
[ 7.670288] with arguments:
[ 7.670292] /init
[ 7.670295] with environment:
[ 7.670298] HOME=/
[ 7.670301] TERM=linux
[ 7.940360] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 7.957146] sdhci: Secure Digital Host Controller Interface driver
[ 7.963452] sdhci: Copyright(c) Pierre Ossman
[ 7.972361] usbcore: registered new interface driver usbfs
[ 7.981134] usbcore: registered new interface driver hub
[ 7.988461] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 7.988739] usbcore: registered new device driver usb
[ 7.989085] sdhci-pltfm: SDHCI platform and OF driver helper
[ 8.002036] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[ 8.039280] pps_core: LinuxPPS API ver. 1 registered
[ 8.042379] mmc1: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[ 8.044401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 8.051555] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 8.072286] PTP clock support registered
[ 8.113638] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 8.121016] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 8.180510] dwc2 fe980000.usb: DWC OTG Controller
[ 8.185300] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1
[ 8.192464] dwc2 fe980000.usb: irq 38, io mem 0xfe980000
[ 8.197962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 8.206351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.210412] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 8.213675] usb usb1: Product: DWC OTG Controller
[ 8.224619] usb usb1: Manufacturer: Linux 6.3.0-rc6+ dwc2_hsotg
[ 8.230624] usb usb1: SerialNumber: fe980000.usb
[ 8.235979] hub 1-0:1.0: USB hub found
[ 8.239821] hub 1-0:1.0: 1 port detected
[ 8.542339] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.754442] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 8.762741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.770307] hub 1-1:1.0: USB hub found
[ 8.774175] hub 1-1:1.0: 4 ports detected
[ 9.822715] xhci_hcd 0000:01:00.0: Timeout for Set DATAX step: 34
[ 9.828909] xhci_hcd 0000:01:00.0: ROM Download Step 34 failed at position 136 bytes with (-110)
[ 10.188426] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.193749] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 10.199301] mmc0: new HS200 MMC card at address 0001
[ 10.207166] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 10.213627] mmcblk0: p1 p2
[ 10.217291] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB
[ 10.225007] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB
[ 10.232142] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (241:0)
[ 10.315008] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[ 10.324800] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.330118] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 10.337628] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 10.344165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 10.352553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.359932] usb usb2: Product: xHCI Host Controller
[ 10.364877] usb usb2: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.370703] usb usb2: SerialNumber: 0000:01:00.0
[ 10.375841] hub 2-0:1.0: USB hub found
[ 10.379725] hub 2-0:1.0: 4 ports detected
[ 10.384226] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 10.392500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[ 10.400886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.408216] usb usb3: Product: xHCI Host Controller
[ 10.413161] usb usb3: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.418988] usb usb3: SerialNumber: 0000:01:00.0
[ 10.424074] hub 3-0:1.0: USB hub found
[ 10.427948] hub 3-0:1.0: 4 ports detected
[ 10.591348] EXT4-fs (mmcblk0p2): mounted filesystem 76e585ad-07e2-43e0-aae7-43697734a9c4 with ordered data mode. Quota mode: none.
[ 10.658391] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 10.717021] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.823840] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 10.832181] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.839439] usb 2-1: Product: USB2.1 Hub
[ 10.843422] usb 2-1: Manufacturer: GenesysLogic
[ 10.851736] hub 2-1:1.0: USB hub found
[ 10.856225] hub 2-1:1.0: 4 ports detected
[ 10.909886] systemd[1]: System time before build time, advancing clock.
[ 10.947056] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 10.955466] systemd[1]: Inserted module 'autofs4'
[ 10.975706] usb 3-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 10.984029] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.991283] usb 3-1: Product: USB3.1 Hub
[ 10.995270] usb 3-1: Manufacturer: GenesysLogic
[ 11.004261] hub 3-1:1.0: USB hub found
[ 11.008720] hub 3-1:1.0: 4 ports detected
[ 11.013048] systemd[1]: systemd 252.5-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 11.045555] systemd[1]: Detected architecture arm64.
[ 11.068093] systemd[1]: Hostname set to <rpi4-20230307>.
[ 11.372962] systemd[1]: Queued start job for default target graphical.target.
[ 11.404694] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 11.431376] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 11.459456] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 11.487308] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 11.515115] systemd[1]: Created slice user.slice - User and Session Slice.
[ 11.538596] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 11.566527] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 11.594854] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 11.626478] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 11.650418] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 11.678427] systemd[1]: Reached target paths.target - Path Units.
[ 11.702417] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 11.726391] systemd[1]: Reached target slices.target - Slice Units.
[ 11.750410] systemd[1]: Reached target swap.target - Swaps.
[ 11.770407] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 11.798822] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 11.826561] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 11.854837] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 11.882732] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 11.910746] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 11.935246] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 11.962692] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 12.006600] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 12.033105] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 12.061091] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 12.088991] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 12.117491] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 12.145364] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 12.173387] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 12.201603] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 12.229518] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 12.248682] fuse: init (API version 7.38)
[ 12.254624] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 12.290806] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 12.318928] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 12.346941] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 12.369881] EXT4-fs (mmcblk0p2): re-mounted 76e585ad-07e2-43e0-aae7-43697734a9c4. Quota mode: none.
[ 12.379420] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 12.394204] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 12.422815] systemd[1]: Started systemd-journald.service - Journal Service.
[ 12.825398] systemd-journald[222]: Received client request to flush runtime journal.
[ 12.836254] systemd-journald[222]: File /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.546414] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.559829] iproc-rng200 fe104000.rng: hwrng registered
[ 13.613221] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 13.710060] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0
[ 13.739924] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.750638] mc: Linux media interface: v0.10
[ 13.785003] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.801798] videodev: Linux video capture interface: v2.00
[ 13.811527] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 13.873899] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.898212] Console: switching to colour dummy device 80x25
[ 13.898513] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.935810] audit: type=1400 audit(1675040631.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=346 comm="apparmor_parser"
[ 13.951158] audit: type=1400 audit(1675040631.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=347 comm="apparmor_parser"
[ 13.951770] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 13.968187] audit: type=1400 audit(1675040631.027:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=347 comm="apparmor_parser"
[ 13.989368] audit: type=1400 audit(1675040631.039:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[ 14.007674] audit: type=1400 audit(1675040631.039:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=349 comm="apparmor_parser"
[ 14.025945] audit: type=1400 audit(1675040631.039:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 14.044325] audit: type=1400 audit(1675040631.039:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=349 comm="apparmor_parser"
[ 14.053979] Registered IR keymap rc-cec
[ 14.065816] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 14.073723] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 14.111139] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.118921] Registered IR keymap rc-cec
[ 14.122949] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 14.130483] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 14.149200] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.156226] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 14.166016] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.174576] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.182578] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.190243] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.199249] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 14.226017] Bluetooth: Core ver 2.22
[ 14.229811] NET: Registered PF_BLUETOOTH protocol family
[ 14.235247] Bluetooth: HCI device and connection manager initialized
[ 14.242619] Bluetooth: HCI socket layer initialized
[ 14.247632] Bluetooth: L2CAP socket layer initialized
[ 14.252788] Bluetooth: SCO socket layer initialized
[ 14.275535] systemd-journald[222]: Oldest entry in /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 14.275550] systemd-journald[222]: /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal: Journal header limits reached or header out-of-date, rotating.
[ 14.283240] Console: switching to colour frame buffer device 240x67
[ 14.323550] Bluetooth: HCI UART driver ver 2.3
[ 14.335320] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 14.341668] Bluetooth: HCI UART protocol H4 registered
[ 14.357601] Bluetooth: HCI UART protocol LL registered
[ 14.362846] Bluetooth: HCI UART protocol ATH3K registered
[ 14.368456] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.375594] Bluetooth: HCI UART protocol Intel registered
[ 14.381875] Bluetooth: HCI UART protocol Broadcom registered
[ 14.383301] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 14.388107] Bluetooth: HCI UART protocol QCA registered
[ 14.396353] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 14.402219] Bluetooth: HCI UART protocol AG6XX registered
[ 14.402257] Bluetooth: HCI UART protocol Marvell registered
[ 14.530445] uart-pl011 fe201000.serial: no DMA platform data
[ 15.194826] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 15.263357] bcmgenet fd580000.ethernet eth0: Link is Down
[ 16.674349] Bluetooth: hci0: command 0xfc18 tx timeout
[ 19.362458] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.370808] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.674343] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[ 24.681157] Bluetooth: hci0: Failed to set baudrate
[ 26.690343] Bluetooth: hci0: command 0x0c03 tx timeout
[ 30.517817] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=481 'systemd'
[ 34.914342] Bluetooth: hci0: BCM: Reset failed (-110)
[-- Attachment #1.3: dmesg-raspios.txt --]
[-- Type: text/plain, Size: 29624 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.84-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP PREEMPT Thu Jan 5 12:03:08 GMT 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688
[ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2633f715-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 7668384K/8245248K available (11520K kernel code, 1956K rwdata, 4136K rodata, 3776K init, 975K bss, 249184K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38065 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000355] Console: colour dummy device 80x25
[ 0.000966] printk: console [tty1] enabled
[ 0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001089] pid_max: default: 32768 minimum: 301
[ 0.001248] LSM: Security Framework initializing
[ 0.001546] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001681] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.003002] cgroup: Disabling memory control group subsystem
[ 0.006038] rcu: Hierarchical SRCU implementation.
[ 0.007234] EFI services will not be available.
[ 0.007806] smp: Bringing up secondary CPUs ...
[ 0.009038] Detected PIPT I-cache on CPU1
[ 0.009125] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.010352] Detected PIPT I-cache on CPU2
[ 0.010404] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.011592] Detected PIPT I-cache on CPU3
[ 0.011642] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011796] smp: Brought up 1 node, 4 CPUs
[ 0.011893] SMP: Total of 4 processors activated.
[ 0.011963] CPU features: detected: 32-bit EL0 Support
[ 0.011986] CPU features: detected: 32-bit EL1 Support
[ 0.012010] CPU features: detected: CRC32 instructions
[ 0.045452] CPU: All CPU(s) started at EL2
[ 0.045557] alternatives: patching kernel code
[ 0.047483] devtmpfs: initialized
[ 0.059212] Enabled cp15_barrier support
[ 0.059287] Enabled setend support
[ 0.059328] KASLR enabled
[ 0.059550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.059602] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.069809] pinctrl core: initialized pinctrl subsystem
[ 0.070734] DMI not present or invalid.
[ 0.071477] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075331] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.075667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.076633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.076757] audit: initializing netlink subsys (disabled)
[ 0.077092] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1
[ 0.077702] thermal_sys: Registered thermal governor 'step_wise'
[ 0.077948] cpuidle: using governor menu
[ 0.078275] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.078489] ASID allocator initialised with 32768 entries
[ 0.078673] Serial: AMBA PL011 UART driver
[ 0.091640] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.116400] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start
[ 0.120415] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9
[ 0.173306] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.177690] vgaarb: loaded
[ 0.178161] SCSI subsystem initialized
[ 0.178406] usbcore: registered new interface driver usbfs
[ 0.178475] usbcore: registered new interface driver hub
[ 0.178555] usbcore: registered new device driver usb
[ 0.178945] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.179178] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.179503] pps_core: LinuxPPS API ver. 1 registered
[ 0.179527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.179566] PTP clock support registered
[ 0.181225] clocksource: Switched to clocksource arch_sys_counter
[ 0.273823] VFS: Disk quotas dquot_6.6.0
[ 0.273976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.274169] FS-Cache: Loaded
[ 0.274443] CacheFiles: Loaded
[ 0.275842] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes
[ 0.275880] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 0.288079] Console: switching to colour frame buffer device 240x67
[ 0.299085] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered!
[ 0.309941] NET: Registered PF_INET protocol family
[ 0.311043] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.317271] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.317476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.317589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.318158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.319322] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.319726] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.319964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.320498] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.322192] RPC: Registered named UNIX socket transport module.
[ 0.322286] RPC: Registered udp transport module.
[ 0.322348] RPC: Registered tcp transport module.
[ 0.322411] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.322500] PCI: CLS 0 bytes, default 64
[ 0.325077] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.325580] kvm [1]: IPA Size Limit: 44 bits
[ 0.326840] kvm [1]: vgic interrupt IRQ9
[ 0.327166] kvm [1]: Hyp mode initialized successfully
[ 1.165639] Initialise system trusted keyrings
[ 1.166141] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.173319] zbud: loaded
[ 1.175334] FS-Cache: Netfs 'nfs' registered for caching
[ 1.176145] NFS: Registering the id_resolver key type
[ 1.176245] Key type id_resolver registered
[ 1.176304] Key type id_legacy registered
[ 1.176468] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.176553] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.177919] Key type asymmetric registered
[ 1.177987] Asymmetric key parser 'x509' registered
[ 1.178129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.178482] io scheduler mq-deadline registered
[ 1.178549] io scheduler kyber registered
[ 1.187178] gpio-507 (ant1): hogged as output/high
[ 1.191521] gpio-511 (ant2): hogged as output/low
[ 1.193106] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.196194] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.199282] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.202337] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.239327] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.242607] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.245566] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.248544] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.251681] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.254957] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.261935] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.265001] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.268294] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.274980] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.277979] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.280967] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.283928] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.286965] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.289902] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.292814] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.295779] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x8b0 took 4891439 usecs
[ 6.311060] iproc-rng200 fe104000.rng: hwrng registered
[ 6.314534] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 6.319013] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 6.335069] brd: module loaded
[ 6.348156] loop: module loaded
[ 6.351963] Loading iSCSI transport class v2.0-870.
[ 6.360243] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 6.421392] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 6.425459] usbcore: registered new interface driver r8152
[ 6.428322] usbcore: registered new interface driver lan78xx
[ 6.431160] usbcore: registered new interface driver smsc95xx
[ 6.434470] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 6.437182] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 16.439927] xhci_hcd 0000:01:00.0: can't setup: -110
[ 16.442611] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[ 16.445296] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[ 16.447938] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[ 16.476657] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 16.479403] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1
[ 16.482477] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[ 16.485318] xhci-hcd fe9c0000.xhci: irq 60, io mem 0xfe9c0000
[ 16.488253] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 16.490882] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 2
[ 16.493588] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 16.496643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 16.499387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.502112] usb usb1: Product: xHCI Host Controller
[ 16.504795] usb usb1: Manufacturer: Linux 5.15.84-v8+ xhci-hcd
[ 16.507470] usb usb1: SerialNumber: fe9c0000.xhci
[ 16.510874] hub 1-0:1.0: USB hub found
[ 16.513639] hub 1-0:1.0: 1 port detected
[ 16.516948] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.519964] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 16.522732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.525424] usb usb2: Product: xHCI Host Controller
[ 16.528124] usb usb2: Manufacturer: Linux 5.15.84-v8+ xhci-hcd
[ 16.530826] usb usb2: SerialNumber: fe9c0000.xhci
[ 16.534135] hub 2-0:1.0: USB hub found
[ 16.536843] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 16.540215] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 16.543346] dwc_otg: FIQ enabled
[ 16.543358] dwc_otg: NAK holdoff enabled
[ 16.543367] dwc_otg: FIQ split-transaction FSM enabled
[ 16.543381] Module dwc_common_port init
[ 16.543991] usbcore: registered new interface driver uas
[ 16.546859] usbcore: registered new interface driver usb-storage
[ 16.549814] mousedev: PS/2 mouse device common for all mice
[ 16.557943] sdhci: Secure Digital Host Controller Interface driver
[ 16.560691] sdhci: Copyright(c) Pierre Ossman
[ 16.564066] sdhci-pltfm: SDHCI platform and OF driver helper
[ 16.570498] ledtrig-cpu: registered to indicate activity on CPUs
[ 16.573830] hid: raw HID events driver (C) Jiri Kosina
[ 16.576692] usbcore: registered new interface driver usbhid
[ 16.579387] usbhid: USB HID core driver
[ 16.582406] ashmem: initialized
[ 16.594310] NET: Registered PF_PACKET protocol family
[ 16.597253] Key type dns_resolver registered
[ 16.601363] registered taskstats version 1
[ 16.604033] Loading compiled-in X.509 certificates
[ 16.607327] Key type .fscrypt registered
[ 16.610011] Key type fscrypt-provisioning registered
[ 16.624033] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 16.627121] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 16.629994] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 16.644203] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 16.647525] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 16.651495] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 16.654242] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 16.688803] of_cfs_init
[ 16.691670] of_cfs_init: OK
[ 16.722560] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 16.725724] Waiting for root device PARTUUID=2633f715-02...
[ 16.769309] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 16.796903] mmc0: new DDR MMC card at address 0001
[ 16.800837] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 16.809033] mmcblk0: p1 p2
[ 16.812442] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 16.815836] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB
[ 16.821551] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB
[ 16.826723] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (242:0)
[ 16.846435] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 16.849554] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 16.856110] devtmpfs: mounted
[ 16.867885] Freeing unused kernel memory: 3776K
[ 16.871018] Run /sbin/init as init process
[ 16.873799] with arguments:
[ 16.873812] /sbin/init
[ 16.873824] with environment:
[ 16.873834] HOME=/
[ 16.873844] TERM=linux
[ 16.917625] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 16.920517] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 16.976801] hub 1-1:1.0: USB hub found
[ 16.979955] hub 1-1:1.0: 4 ports detected
[ 17.115025] systemd[1]: System time before build time, advancing clock.
[ 17.281006] NET: Registered PF_INET6 protocol family
[ 17.285955] Segment Routing with IPv6
[ 17.288759] In-situ OAM (IOAM) with IPv6
[ 17.347801] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 17.355107] systemd[1]: Detected architecture arm64.
[ 17.372826] systemd[1]: Set hostname to <raspberrypi>.
[ 18.007461] systemd[1]: Queued start job for default target Multi-User System.
[ 18.015245] systemd[1]: Created slice system-getty.slice.
[ 18.023361] systemd[1]: Created slice system-modprobe.slice.
[ 18.031070] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 18.038628] systemd[1]: Created slice User and Session Slice.
[ 18.045695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.052794] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.060646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.067819] systemd[1]: Reached target Local Encrypted Volumes.
[ 18.074931] systemd[1]: Reached target Paths.
[ 18.081989] systemd[1]: Reached target Slices.
[ 18.088999] systemd[1]: Reached target Swap.
[ 18.098874] systemd[1]: Listening on Syslog Socket.
[ 18.107183] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.114639] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.123004] systemd[1]: Listening on Journal Audit Socket.
[ 18.130947] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.139130] systemd[1]: Listening on Journal Socket.
[ 18.150293] systemd[1]: Listening on udev Control Socket.
[ 18.158768] systemd[1]: Listening on udev Kernel Socket.
[ 18.167005] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 18.174867] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.188259] systemd[1]: Mounting RPC Pipe File System...
[ 18.203433] systemd[1]: Mounting Kernel Debug File System...
[ 18.216228] systemd[1]: Mounting Kernel Trace File System...
[ 18.224478] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 18.233963] systemd[1]: Starting Restore / save the current clock...
[ 18.247761] systemd[1]: Starting Set the console keyboard layout...
[ 18.263157] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 18.277612] systemd[1]: Starting Load Kernel Module configfs...
[ 18.292076] systemd[1]: Starting Load Kernel Module drm...
[ 18.310158] systemd[1]: Starting Load Kernel Module fuse...
[ 18.322455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 18.332214] systemd[1]: Starting File System Check on Root Device...
[ 18.351258] systemd[1]: Starting Journal Service...
[ 18.366322] fuse: init (API version 7.34)
[ 18.370518] systemd[1]: Starting Load Kernel Modules...
[ 18.386246] systemd[1]: Starting Coldplug All udev Devices...
[ 18.429542] systemd[1]: Mounted POSIX Message Queue File System.
[ 18.445993] systemd[1]: Mounted RPC Pipe File System.
[ 18.472913] systemd[1]: Mounted Kernel Debug File System.
[ 18.480740] systemd[1]: Mounted Kernel Trace File System.
[ 18.495347] systemd[1]: Finished Restore / save the current clock.
[ 18.526563] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 18.537341] systemd[1]: modprobe@configfs.service: Succeeded.
[ 18.542775] systemd[1]: Finished Load Kernel Module configfs.
[ 18.552696] systemd[1]: modprobe@drm.service: Succeeded.
[ 18.558659] systemd[1]: Finished Load Kernel Module drm.
[ 18.568541] systemd[1]: modprobe@fuse.service: Succeeded.
[ 18.573880] systemd[1]: Finished Load Kernel Module fuse.
[ 18.583801] systemd[1]: Finished File System Check on Root Device.
[ 18.594209] systemd[1]: Finished Load Kernel Modules.
[ 18.614455] systemd[1]: Mounting FUSE Control File System...
[ 18.627736] systemd[1]: Mounting Kernel Configuration File System...
[ 18.642651] systemd[1]: Started File System Check Daemon to report status.
[ 18.665986] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 18.678575] systemd[1]: Starting Apply Kernel Variables...
[ 18.693594] systemd[1]: Mounted FUSE Control File System.
[ 18.717867] systemd[1]: Mounted Kernel Configuration File System.
[ 18.737925] systemd[1]: Started Journal Service.
[ 18.843553] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 18.900078] systemd-journald[146]: Received client request to flush runtime journal.
[ 18.908223] systemd-journald[146]: File /var/log/journal/5c71b33d54d54b56a83192f2a7dd0c26/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 19.868410] mc: Linux media interface: v0.10
[ 20.022952] videodev: Linux video capture interface: v2.00
[ 20.085706] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.116995] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 20.117044] [vc_sm_connected_init]: start
[ 20.126068] [vc_sm_connected_init]: installed successfully
[ 20.165594] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.178502] bcm2835_audio bcm2835_audio: there is not valid maps for state default
[ 20.222178] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.231807] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.236649] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 20.237863] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 20.238268] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.251942] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.269008] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 20.270311] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 20.296440] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 20.333534] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.339814] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.371042] rpivid feb10000.codec: Device registered as /dev/video19
[ 20.383685] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 20.383742] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 20.383765] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 20.383784] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 20.383826] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 20.425869] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 20.426721] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 20.427593] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 20.427623] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 20.427682] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 20.435536] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 20.435595] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 20.435638] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 20.435657] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 20.435674] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 20.436031] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 20.555668] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 20.558412] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 20.572482] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 20.572563] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 20.609906] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 20.609978] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 20.617966] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 20.618066] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 20.700103] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 21.480722] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff)
[ 21.480772] fb0: switching to vc4 from simple
[ 21.490606] Console: switching to colour dummy device 80x25
[ 21.538621] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 21.541009] Registered IR keymap rc-cec
[ 21.541283] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 21.541508] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 21.549809] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 21.560367] Registered IR keymap rc-cec
[ 21.560599] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 21.560831] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 21.567421] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 21.567959] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 21.568349] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.568694] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569042] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569502] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569876] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.586325] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 21.683816] Console: switching to colour frame buffer device 240x67
[ 21.712387] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 22.009917] 8021q: 802.1Q VLAN Support v1.8
[ 22.086183] uart-pl011 fe201000.serial: no DMA platform data
[ 22.096980] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 22.360820] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 22.389520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.397905] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 22.488754] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 22.490537] bcmgenet fd580000.ethernet eth0: Link is Down
[ 26.589395] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 26.589433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 16:19 ` Cyril Brulebois
0 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-14 16:19 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1.1: Type: text/plain, Size: 3007 bytes --]
Florian Fainelli <f.fainelli@gmail.com> (2023-04-14):
> Cyril, based upon the table and logs you provided whereby you have used the
> following:
>
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> in the before/unpatched case we have a PCIe link down and in the
> after/patched we have a PCIe link up but a kernel panic. Neither are great
> nor resulting in a fully functional PCIe device.
Based on Jim's feedback, I'm attaching a new dmesg for the aforementioned
setup, with an unpatched kernel (dmesg-unpatched-pcie-link-up.txt).
I fear that initially I might have not waited enough before power off and
power on when replugging the SupaHub adapter, and I've only seen the PCIe
link down a few times (now that I'm actively paying attention to that
part). I'm indeed seeing PCIe link up consistently (100%) when using the
following method:
for i in $(seq 1 20); do
# power on, let the system boot up and settle:
sispmctl -t 4; sleep 2m
ssh cm4 sh -c "dmesg > dmesg-$i.txt; poweroff"
# let the system power down, and power off:
sleep 30; sispmctl -t 4
# wait before power cycling:
sleep 10
done
> Looking at:
> https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
>
> it would appear that it can accept an external power supply, do you have one
> connected to that USB expansion card by any chance?
With the patched kernel, I have tried several things (leaving the regular
12V adapter plugged in all the time):
- No external power supply (that's what I've been using in all previous
attempts).
- Using a 5V PSU with 2 pins (ground and 5V) plugged on the Ext PSU
4-pin header on the IO Board.
- Using a 5V PSU with a SATA connector plugged directly onto the SupaHub
adapter.
I'm getting the same trace in all cases.
> Are you able to boot the kernel before/after if you disconnect any USB
> peripheral?
The trace is obtained without any USB peripheral (on the extension card or
on the onboard USB slots). Besides the SupaHub adapter on the PCIe slot, I
only have Ethernet and HDMI plugged in (I'm getting traces via serial
console, and operating the system over SSH when it boots fine).
As soon as I unplug the SupaHub board itself, the system boots fine.
> Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> Raspberry Pi kernel tree?
With the Raspberry Pi OS (64-bit) > Raspberry Pi OS Lite image
(2023-02-21-raspios-bullseye-arm64-lite.img.xz), the system at least
boots fine; I haven't tried adding devices to the mix just yet, trying
to stick with that particular setup.
A full dmesg is attached (dmesg-raspios.txt).
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.1.2: dmesg-unpatched-pcie-link-up.txt --]
[-- Type: text/plain, Size: 32861 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.3.0-rc6+ (kibi@genova) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 13 20:03:01 CEST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef625a0..0x000000003ef626d0 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff00c280-0x1ff00efff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s88232 r8192 d30552 u126976
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03140 bcm2709.serial=0x751d0632 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3987300K/8245248K available (13440K kernel code, 2774K rwdata, 8248K rodata, 6528K init, 607K bss, 290288K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43928 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008293] Console: colour dummy device 80x25
[ 0.012831] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.023383] pid_max: default: 32768 minimum: 301
[ 0.028104] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor,tomoyo,bpf
[ 0.037094] landlock: Up and running.
[ 0.040785] Yama: becoming mindful.
[ 0.044391] AppArmor: AppArmor initialized
[ 0.048529] TOMOYO Linux initialized
[ 0.052150] LSM support for eBPF active
[ 0.056115] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063811] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073125] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.080449] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.086656] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.092943] rcu: Hierarchical SRCU implementation.
[ 0.097782] rcu: Max phase no-delay instances is 1000.
[ 0.104118] EFI services will not be available.
[ 0.109030] smp: Bringing up secondary CPUs ...
[ 0.113978] Detected PIPT I-cache on CPU1
[ 0.114047] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.114421] Detected PIPT I-cache on CPU2
[ 0.114457] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.114822] Detected PIPT I-cache on CPU3
[ 0.114857] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.114898] smp: Brought up 1 node, 4 CPUs
[ 0.150939] SMP: Total of 4 processors activated.
[ 0.155688] CPU features: detected: 32-bit EL0 Support
[ 0.160873] CPU features: detected: 32-bit EL1 Support
[ 0.166062] CPU features: detected: CRC32 instructions
[ 0.171305] CPU: All CPU(s) started at EL2
[ 0.175448] alternatives: applying system-wide alternatives
[ 0.258167] node 0 deferred pages initialised in 76ms
[ 0.264630] devtmpfs: initialized
[ 0.273248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.283148] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291457] pinctrl core: initialized pinctrl subsystem
[ 0.297614] DMI not present or invalid.
[ 0.301833] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.309143] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.316833] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.325692] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.333817] audit: initializing netlink subsys (disabled)
[ 0.339412] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[ 0.339957] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347244] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.353398] thermal_sys: Registered thermal governor 'step_wise'
[ 0.359463] thermal_sys: Registered thermal governor 'user_space'
[ 0.365528] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.371707] cpuidle: using governor ladder
[ 0.382439] cpuidle: using governor menu
[ 0.386517] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.393433] ASID allocator initialised with 32768 entries
[ 0.399130] Serial: AMBA PL011 UART driver
[ 0.410262] KASLR enabled
[ 0.413665] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.420530] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.426862] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.433717] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.440046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.446900] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.453229] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.460083] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.467546] ACPI: Interpreter disabled.
[ 0.471664] iommu: Default domain type: Translated
[ 0.476593] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.483082] EDAC MC: Ver: 3.0.0
[ 0.486519] scmi_core: SCMI protocol bus registered
[ 0.492029] NetLabel: Initializing
[ 0.495466] NetLabel: domain hash size = 128
[ 0.499863] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.505611] NetLabel: unlabeled traffic allowed by default
[ 0.511374] vgaarb: loaded
[ 0.514332] clocksource: Switched to clocksource arch_sys_counter
[ 0.549785] VFS: Disk quotas dquot_6.6.0
[ 0.553806] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.561228] AppArmor: AppArmor Filesystem Enabled
[ 0.566034] pnp: PnP ACPI: disabled
[ 0.573512] NET: Registered PF_INET protocol family
[ 0.578927] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.590470] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.599270] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.607308] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.616322] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.626439] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.633407] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.641344] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.648308] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.655786] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.661535] NET: Registered PF_XDP protocol family
[ 0.666384] PCI: CLS 0 bytes, default 64
[ 0.670609] Trying to unpack rootfs image as initramfs...
[ 0.676170] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.684669] kvm [1]: IPA Size Limit: 44 bits
[ 0.690004] kvm [1]: vgic interrupt IRQ9
[ 0.694037] kvm [1]: Hyp mode initialized successfully
[ 0.700409] Initialise system trusted keyrings
[ 0.704985] Key type blacklist registered
[ 0.709327] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.716008] zbud: loaded
[ 0.719171] integrity: Platform Keyring initialized
[ 0.724197] integrity: Machine keyring initialized
[ 0.729077] Key type asymmetric registered
[ 0.733224] Asymmetric key parser 'x509' registered
[ 1.675267] Freeing initrd memory: 31880K
[ 1.692974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.700551] io scheduler mq-deadline registered
[ 1.707175] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 1.720146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.727354] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.734395] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.743554] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.751740] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.760548] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.766887] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.772430] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.782907] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.789018] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.904371] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.910823] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.916913] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.923886] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.938371] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 1.945500] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.953074] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.958095] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.965230] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.971458] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 1.977465] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 1.983179] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.988927] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.996862] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896177 usecs
[ 7.005184] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes
[ 7.013892] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 7.026754] Console: switching to colour frame buffer device 228x61
[ 7.036135] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered!
[ 7.048696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.056025] printk: console [ttyS1] disabled
[ 7.060403] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62499999) is a 16550
[ 7.069404] printk: console [ttyS1] enabled
[ 7.077886] printk: bootconsole [bcm2835aux0] disabled
[ 7.088802] Serial: AMBA driver
[ 7.092199] msm_serial: driver initialized
[ 7.097592] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 7.105367] mousedev: PS/2 mouse device common for all mice
[ 7.111592] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 7.118682] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 7.126399] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.133020] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 7.156951] NET: Registered PF_INET6 protocol family
[ 7.174534] Segment Routing with IPv6
[ 7.178286] In-situ OAM (IOAM) with IPv6
[ 7.182323] mip6: Mobile IPv6
[ 7.185345] NET: Registered PF_PACKET protocol family
[ 7.190549] mpls_gso: MPLS GSO support
[ 7.197394] registered taskstats version 1
[ 7.201792] Loading compiled-in X.509 certificates
[ 7.244632] Loaded X.509 cert 'Build time autogenerated kernel key: 83983db0a2e3422ed1c09ac9326e286f87dd9c0e'
[ 7.256299] zswap: loaded using pool lzo/zbud
[ 7.264462] Key type .fscrypt registered
[ 7.268454] Key type fscrypt-provisioning registered
[ 7.285473] Key type encrypted registered
[ 7.289560] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.295146] ima: No TPM chip found, activating TPM-bypass!
[ 7.300722] ima: Allocated hash algorithm: sha256
[ 7.305517] ima: No architecture policies found
[ 7.310133] evm: Initialising EVM extended attributes:
[ 7.315340] evm: security.selinux
[ 7.318697] evm: security.SMACK64 (disabled)
[ 7.323022] evm: security.SMACK64EXEC (disabled)
[ 7.327699] evm: security.SMACK64TRANSMUTE (disabled)
[ 7.332818] evm: security.SMACK64MMAP (disabled)
[ 7.337495] evm: security.apparmor
[ 7.340939] evm: security.ima
[ 7.343942] evm: security.capability
[ 7.347562] evm: HMAC attrs: 0x1
[ 7.556359] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
[ 7.565687] serial serial0: tty port ttyAMA0 registered
[ 7.571649] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16
[ 7.581835] gpio-573 (ant1): hogged as output/high
[ 7.587958] gpio-577 (ant2): hogged as output/low
[ 7.605203] Freeing unused kernel memory: 6528K
[ 7.660804] Checked W+X mappings: passed, no W+X pages found
[ 7.666581] Run /init as init process
[ 7.670288] with arguments:
[ 7.670292] /init
[ 7.670295] with environment:
[ 7.670298] HOME=/
[ 7.670301] TERM=linux
[ 7.940360] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 7.957146] sdhci: Secure Digital Host Controller Interface driver
[ 7.963452] sdhci: Copyright(c) Pierre Ossman
[ 7.972361] usbcore: registered new interface driver usbfs
[ 7.981134] usbcore: registered new interface driver hub
[ 7.988461] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 7.988739] usbcore: registered new device driver usb
[ 7.989085] sdhci-pltfm: SDHCI platform and OF driver helper
[ 8.002036] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[ 8.039280] pps_core: LinuxPPS API ver. 1 registered
[ 8.042379] mmc1: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[ 8.044401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 8.051555] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 8.072286] PTP clock support registered
[ 8.113638] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 8.121016] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 8.180510] dwc2 fe980000.usb: DWC OTG Controller
[ 8.185300] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1
[ 8.192464] dwc2 fe980000.usb: irq 38, io mem 0xfe980000
[ 8.197962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 8.206351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.210412] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 8.213675] usb usb1: Product: DWC OTG Controller
[ 8.224619] usb usb1: Manufacturer: Linux 6.3.0-rc6+ dwc2_hsotg
[ 8.230624] usb usb1: SerialNumber: fe980000.usb
[ 8.235979] hub 1-0:1.0: USB hub found
[ 8.239821] hub 1-0:1.0: 1 port detected
[ 8.542339] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.754442] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 8.762741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.770307] hub 1-1:1.0: USB hub found
[ 8.774175] hub 1-1:1.0: 4 ports detected
[ 9.822715] xhci_hcd 0000:01:00.0: Timeout for Set DATAX step: 34
[ 9.828909] xhci_hcd 0000:01:00.0: ROM Download Step 34 failed at position 136 bytes with (-110)
[ 10.188426] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.193749] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 10.199301] mmc0: new HS200 MMC card at address 0001
[ 10.207166] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 10.213627] mmcblk0: p1 p2
[ 10.217291] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB
[ 10.225007] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB
[ 10.232142] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (241:0)
[ 10.315008] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[ 10.324800] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.330118] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 10.337628] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 10.344165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 10.352553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.359932] usb usb2: Product: xHCI Host Controller
[ 10.364877] usb usb2: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.370703] usb usb2: SerialNumber: 0000:01:00.0
[ 10.375841] hub 2-0:1.0: USB hub found
[ 10.379725] hub 2-0:1.0: 4 ports detected
[ 10.384226] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 10.392500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[ 10.400886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.408216] usb usb3: Product: xHCI Host Controller
[ 10.413161] usb usb3: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.418988] usb usb3: SerialNumber: 0000:01:00.0
[ 10.424074] hub 3-0:1.0: USB hub found
[ 10.427948] hub 3-0:1.0: 4 ports detected
[ 10.591348] EXT4-fs (mmcblk0p2): mounted filesystem 76e585ad-07e2-43e0-aae7-43697734a9c4 with ordered data mode. Quota mode: none.
[ 10.658391] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 10.717021] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.823840] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 10.832181] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.839439] usb 2-1: Product: USB2.1 Hub
[ 10.843422] usb 2-1: Manufacturer: GenesysLogic
[ 10.851736] hub 2-1:1.0: USB hub found
[ 10.856225] hub 2-1:1.0: 4 ports detected
[ 10.909886] systemd[1]: System time before build time, advancing clock.
[ 10.947056] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 10.955466] systemd[1]: Inserted module 'autofs4'
[ 10.975706] usb 3-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 10.984029] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.991283] usb 3-1: Product: USB3.1 Hub
[ 10.995270] usb 3-1: Manufacturer: GenesysLogic
[ 11.004261] hub 3-1:1.0: USB hub found
[ 11.008720] hub 3-1:1.0: 4 ports detected
[ 11.013048] systemd[1]: systemd 252.5-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 11.045555] systemd[1]: Detected architecture arm64.
[ 11.068093] systemd[1]: Hostname set to <rpi4-20230307>.
[ 11.372962] systemd[1]: Queued start job for default target graphical.target.
[ 11.404694] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 11.431376] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 11.459456] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 11.487308] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 11.515115] systemd[1]: Created slice user.slice - User and Session Slice.
[ 11.538596] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 11.566527] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 11.594854] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 11.626478] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 11.650418] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 11.678427] systemd[1]: Reached target paths.target - Path Units.
[ 11.702417] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 11.726391] systemd[1]: Reached target slices.target - Slice Units.
[ 11.750410] systemd[1]: Reached target swap.target - Swaps.
[ 11.770407] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 11.798822] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 11.826561] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 11.854837] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 11.882732] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 11.910746] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 11.935246] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 11.962692] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 12.006600] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 12.033105] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 12.061091] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 12.088991] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 12.117491] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 12.145364] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 12.173387] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 12.201603] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 12.229518] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 12.248682] fuse: init (API version 7.38)
[ 12.254624] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 12.290806] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 12.318928] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 12.346941] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 12.369881] EXT4-fs (mmcblk0p2): re-mounted 76e585ad-07e2-43e0-aae7-43697734a9c4. Quota mode: none.
[ 12.379420] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 12.394204] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 12.422815] systemd[1]: Started systemd-journald.service - Journal Service.
[ 12.825398] systemd-journald[222]: Received client request to flush runtime journal.
[ 12.836254] systemd-journald[222]: File /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.546414] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.559829] iproc-rng200 fe104000.rng: hwrng registered
[ 13.613221] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 13.710060] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0
[ 13.739924] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.750638] mc: Linux media interface: v0.10
[ 13.785003] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.801798] videodev: Linux video capture interface: v2.00
[ 13.811527] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 13.873899] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.898212] Console: switching to colour dummy device 80x25
[ 13.898513] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.935810] audit: type=1400 audit(1675040631.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=346 comm="apparmor_parser"
[ 13.951158] audit: type=1400 audit(1675040631.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=347 comm="apparmor_parser"
[ 13.951770] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 13.968187] audit: type=1400 audit(1675040631.027:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=347 comm="apparmor_parser"
[ 13.989368] audit: type=1400 audit(1675040631.039:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[ 14.007674] audit: type=1400 audit(1675040631.039:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=349 comm="apparmor_parser"
[ 14.025945] audit: type=1400 audit(1675040631.039:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 14.044325] audit: type=1400 audit(1675040631.039:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=349 comm="apparmor_parser"
[ 14.053979] Registered IR keymap rc-cec
[ 14.065816] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 14.073723] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 14.111139] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.118921] Registered IR keymap rc-cec
[ 14.122949] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 14.130483] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 14.149200] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.156226] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 14.166016] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.174576] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.182578] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.190243] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.199249] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 14.226017] Bluetooth: Core ver 2.22
[ 14.229811] NET: Registered PF_BLUETOOTH protocol family
[ 14.235247] Bluetooth: HCI device and connection manager initialized
[ 14.242619] Bluetooth: HCI socket layer initialized
[ 14.247632] Bluetooth: L2CAP socket layer initialized
[ 14.252788] Bluetooth: SCO socket layer initialized
[ 14.275535] systemd-journald[222]: Oldest entry in /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 14.275550] systemd-journald[222]: /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal: Journal header limits reached or header out-of-date, rotating.
[ 14.283240] Console: switching to colour frame buffer device 240x67
[ 14.323550] Bluetooth: HCI UART driver ver 2.3
[ 14.335320] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 14.341668] Bluetooth: HCI UART protocol H4 registered
[ 14.357601] Bluetooth: HCI UART protocol LL registered
[ 14.362846] Bluetooth: HCI UART protocol ATH3K registered
[ 14.368456] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.375594] Bluetooth: HCI UART protocol Intel registered
[ 14.381875] Bluetooth: HCI UART protocol Broadcom registered
[ 14.383301] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 14.388107] Bluetooth: HCI UART protocol QCA registered
[ 14.396353] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 14.402219] Bluetooth: HCI UART protocol AG6XX registered
[ 14.402257] Bluetooth: HCI UART protocol Marvell registered
[ 14.530445] uart-pl011 fe201000.serial: no DMA platform data
[ 15.194826] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 15.263357] bcmgenet fd580000.ethernet eth0: Link is Down
[ 16.674349] Bluetooth: hci0: command 0xfc18 tx timeout
[ 19.362458] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.370808] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.674343] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[ 24.681157] Bluetooth: hci0: Failed to set baudrate
[ 26.690343] Bluetooth: hci0: command 0x0c03 tx timeout
[ 30.517817] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=481 'systemd'
[ 34.914342] Bluetooth: hci0: BCM: Reset failed (-110)
[-- Attachment #1.1.3: dmesg-raspios.txt --]
[-- Type: text/plain, Size: 29624 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.84-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP PREEMPT Thu Jan 5 12:03:08 GMT 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688
[ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2633f715-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 7668384K/8245248K available (11520K kernel code, 1956K rwdata, 4136K rodata, 3776K init, 975K bss, 249184K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38065 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000355] Console: colour dummy device 80x25
[ 0.000966] printk: console [tty1] enabled
[ 0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.001089] pid_max: default: 32768 minimum: 301
[ 0.001248] LSM: Security Framework initializing
[ 0.001546] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.001681] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.003002] cgroup: Disabling memory control group subsystem
[ 0.006038] rcu: Hierarchical SRCU implementation.
[ 0.007234] EFI services will not be available.
[ 0.007806] smp: Bringing up secondary CPUs ...
[ 0.009038] Detected PIPT I-cache on CPU1
[ 0.009125] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.010352] Detected PIPT I-cache on CPU2
[ 0.010404] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.011592] Detected PIPT I-cache on CPU3
[ 0.011642] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011796] smp: Brought up 1 node, 4 CPUs
[ 0.011893] SMP: Total of 4 processors activated.
[ 0.011963] CPU features: detected: 32-bit EL0 Support
[ 0.011986] CPU features: detected: 32-bit EL1 Support
[ 0.012010] CPU features: detected: CRC32 instructions
[ 0.045452] CPU: All CPU(s) started at EL2
[ 0.045557] alternatives: patching kernel code
[ 0.047483] devtmpfs: initialized
[ 0.059212] Enabled cp15_barrier support
[ 0.059287] Enabled setend support
[ 0.059328] KASLR enabled
[ 0.059550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.059602] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.069809] pinctrl core: initialized pinctrl subsystem
[ 0.070734] DMI not present or invalid.
[ 0.071477] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075331] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.075667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.076633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.076757] audit: initializing netlink subsys (disabled)
[ 0.077092] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1
[ 0.077702] thermal_sys: Registered thermal governor 'step_wise'
[ 0.077948] cpuidle: using governor menu
[ 0.078275] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.078489] ASID allocator initialised with 32768 entries
[ 0.078673] Serial: AMBA PL011 UART driver
[ 0.091640] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.116400] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start
[ 0.120415] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9
[ 0.173306] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.177690] vgaarb: loaded
[ 0.178161] SCSI subsystem initialized
[ 0.178406] usbcore: registered new interface driver usbfs
[ 0.178475] usbcore: registered new interface driver hub
[ 0.178555] usbcore: registered new device driver usb
[ 0.178945] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.179178] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.179503] pps_core: LinuxPPS API ver. 1 registered
[ 0.179527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.179566] PTP clock support registered
[ 0.181225] clocksource: Switched to clocksource arch_sys_counter
[ 0.273823] VFS: Disk quotas dquot_6.6.0
[ 0.273976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.274169] FS-Cache: Loaded
[ 0.274443] CacheFiles: Loaded
[ 0.275842] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes
[ 0.275880] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 0.288079] Console: switching to colour frame buffer device 240x67
[ 0.299085] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered!
[ 0.309941] NET: Registered PF_INET protocol family
[ 0.311043] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.317271] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.317476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.317589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.318158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.319322] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.319726] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.319964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.320498] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.322192] RPC: Registered named UNIX socket transport module.
[ 0.322286] RPC: Registered udp transport module.
[ 0.322348] RPC: Registered tcp transport module.
[ 0.322411] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.322500] PCI: CLS 0 bytes, default 64
[ 0.325077] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.325580] kvm [1]: IPA Size Limit: 44 bits
[ 0.326840] kvm [1]: vgic interrupt IRQ9
[ 0.327166] kvm [1]: Hyp mode initialized successfully
[ 1.165639] Initialise system trusted keyrings
[ 1.166141] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.173319] zbud: loaded
[ 1.175334] FS-Cache: Netfs 'nfs' registered for caching
[ 1.176145] NFS: Registering the id_resolver key type
[ 1.176245] Key type id_resolver registered
[ 1.176304] Key type id_legacy registered
[ 1.176468] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.176553] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.177919] Key type asymmetric registered
[ 1.177987] Asymmetric key parser 'x509' registered
[ 1.178129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.178482] io scheduler mq-deadline registered
[ 1.178549] io scheduler kyber registered
[ 1.187178] gpio-507 (ant1): hogged as output/high
[ 1.191521] gpio-511 (ant2): hogged as output/low
[ 1.193106] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.196194] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.199282] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.202337] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.239327] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.242607] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.245566] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.248544] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.251681] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.254957] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.261935] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.265001] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.268294] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.274980] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.277979] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.280967] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.283928] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.286965] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.289902] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.292814] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.295779] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x8b0 took 4891439 usecs
[ 6.311060] iproc-rng200 fe104000.rng: hwrng registered
[ 6.314534] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 6.319013] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 6.335069] brd: module loaded
[ 6.348156] loop: module loaded
[ 6.351963] Loading iSCSI transport class v2.0-870.
[ 6.360243] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 6.421392] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 6.425459] usbcore: registered new interface driver r8152
[ 6.428322] usbcore: registered new interface driver lan78xx
[ 6.431160] usbcore: registered new interface driver smsc95xx
[ 6.434470] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 6.437182] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 16.439927] xhci_hcd 0000:01:00.0: can't setup: -110
[ 16.442611] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[ 16.445296] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[ 16.447938] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[ 16.476657] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 16.479403] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1
[ 16.482477] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[ 16.485318] xhci-hcd fe9c0000.xhci: irq 60, io mem 0xfe9c0000
[ 16.488253] xhci-hcd fe9c0000.xhci: xHCI Host Controller
[ 16.490882] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 2
[ 16.493588] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 16.496643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 16.499387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.502112] usb usb1: Product: xHCI Host Controller
[ 16.504795] usb usb1: Manufacturer: Linux 5.15.84-v8+ xhci-hcd
[ 16.507470] usb usb1: SerialNumber: fe9c0000.xhci
[ 16.510874] hub 1-0:1.0: USB hub found
[ 16.513639] hub 1-0:1.0: 1 port detected
[ 16.516948] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 16.519964] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 16.522732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.525424] usb usb2: Product: xHCI Host Controller
[ 16.528124] usb usb2: Manufacturer: Linux 5.15.84-v8+ xhci-hcd
[ 16.530826] usb usb2: SerialNumber: fe9c0000.xhci
[ 16.534135] hub 2-0:1.0: USB hub found
[ 16.536843] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 16.540215] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 16.543346] dwc_otg: FIQ enabled
[ 16.543358] dwc_otg: NAK holdoff enabled
[ 16.543367] dwc_otg: FIQ split-transaction FSM enabled
[ 16.543381] Module dwc_common_port init
[ 16.543991] usbcore: registered new interface driver uas
[ 16.546859] usbcore: registered new interface driver usb-storage
[ 16.549814] mousedev: PS/2 mouse device common for all mice
[ 16.557943] sdhci: Secure Digital Host Controller Interface driver
[ 16.560691] sdhci: Copyright(c) Pierre Ossman
[ 16.564066] sdhci-pltfm: SDHCI platform and OF driver helper
[ 16.570498] ledtrig-cpu: registered to indicate activity on CPUs
[ 16.573830] hid: raw HID events driver (C) Jiri Kosina
[ 16.576692] usbcore: registered new interface driver usbhid
[ 16.579387] usbhid: USB HID core driver
[ 16.582406] ashmem: initialized
[ 16.594310] NET: Registered PF_PACKET protocol family
[ 16.597253] Key type dns_resolver registered
[ 16.601363] registered taskstats version 1
[ 16.604033] Loading compiled-in X.509 certificates
[ 16.607327] Key type .fscrypt registered
[ 16.610011] Key type fscrypt-provisioning registered
[ 16.624033] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 16.627121] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 16.629994] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 16.644203] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 16.647525] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 16.651495] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 16.654242] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 16.688803] of_cfs_init
[ 16.691670] of_cfs_init: OK
[ 16.722560] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 16.725724] Waiting for root device PARTUUID=2633f715-02...
[ 16.769309] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 16.796903] mmc0: new DDR MMC card at address 0001
[ 16.800837] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 16.809033] mmcblk0: p1 p2
[ 16.812442] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 16.815836] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB
[ 16.821551] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB
[ 16.826723] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (242:0)
[ 16.846435] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 16.849554] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 16.856110] devtmpfs: mounted
[ 16.867885] Freeing unused kernel memory: 3776K
[ 16.871018] Run /sbin/init as init process
[ 16.873799] with arguments:
[ 16.873812] /sbin/init
[ 16.873824] with environment:
[ 16.873834] HOME=/
[ 16.873844] TERM=linux
[ 16.917625] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 16.920517] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 16.976801] hub 1-1:1.0: USB hub found
[ 16.979955] hub 1-1:1.0: 4 ports detected
[ 17.115025] systemd[1]: System time before build time, advancing clock.
[ 17.281006] NET: Registered PF_INET6 protocol family
[ 17.285955] Segment Routing with IPv6
[ 17.288759] In-situ OAM (IOAM) with IPv6
[ 17.347801] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 17.355107] systemd[1]: Detected architecture arm64.
[ 17.372826] systemd[1]: Set hostname to <raspberrypi>.
[ 18.007461] systemd[1]: Queued start job for default target Multi-User System.
[ 18.015245] systemd[1]: Created slice system-getty.slice.
[ 18.023361] systemd[1]: Created slice system-modprobe.slice.
[ 18.031070] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 18.038628] systemd[1]: Created slice User and Session Slice.
[ 18.045695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.052794] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.060646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.067819] systemd[1]: Reached target Local Encrypted Volumes.
[ 18.074931] systemd[1]: Reached target Paths.
[ 18.081989] systemd[1]: Reached target Slices.
[ 18.088999] systemd[1]: Reached target Swap.
[ 18.098874] systemd[1]: Listening on Syslog Socket.
[ 18.107183] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.114639] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.123004] systemd[1]: Listening on Journal Audit Socket.
[ 18.130947] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.139130] systemd[1]: Listening on Journal Socket.
[ 18.150293] systemd[1]: Listening on udev Control Socket.
[ 18.158768] systemd[1]: Listening on udev Kernel Socket.
[ 18.167005] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 18.174867] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.188259] systemd[1]: Mounting RPC Pipe File System...
[ 18.203433] systemd[1]: Mounting Kernel Debug File System...
[ 18.216228] systemd[1]: Mounting Kernel Trace File System...
[ 18.224478] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 18.233963] systemd[1]: Starting Restore / save the current clock...
[ 18.247761] systemd[1]: Starting Set the console keyboard layout...
[ 18.263157] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 18.277612] systemd[1]: Starting Load Kernel Module configfs...
[ 18.292076] systemd[1]: Starting Load Kernel Module drm...
[ 18.310158] systemd[1]: Starting Load Kernel Module fuse...
[ 18.322455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 18.332214] systemd[1]: Starting File System Check on Root Device...
[ 18.351258] systemd[1]: Starting Journal Service...
[ 18.366322] fuse: init (API version 7.34)
[ 18.370518] systemd[1]: Starting Load Kernel Modules...
[ 18.386246] systemd[1]: Starting Coldplug All udev Devices...
[ 18.429542] systemd[1]: Mounted POSIX Message Queue File System.
[ 18.445993] systemd[1]: Mounted RPC Pipe File System.
[ 18.472913] systemd[1]: Mounted Kernel Debug File System.
[ 18.480740] systemd[1]: Mounted Kernel Trace File System.
[ 18.495347] systemd[1]: Finished Restore / save the current clock.
[ 18.526563] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 18.537341] systemd[1]: modprobe@configfs.service: Succeeded.
[ 18.542775] systemd[1]: Finished Load Kernel Module configfs.
[ 18.552696] systemd[1]: modprobe@drm.service: Succeeded.
[ 18.558659] systemd[1]: Finished Load Kernel Module drm.
[ 18.568541] systemd[1]: modprobe@fuse.service: Succeeded.
[ 18.573880] systemd[1]: Finished Load Kernel Module fuse.
[ 18.583801] systemd[1]: Finished File System Check on Root Device.
[ 18.594209] systemd[1]: Finished Load Kernel Modules.
[ 18.614455] systemd[1]: Mounting FUSE Control File System...
[ 18.627736] systemd[1]: Mounting Kernel Configuration File System...
[ 18.642651] systemd[1]: Started File System Check Daemon to report status.
[ 18.665986] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 18.678575] systemd[1]: Starting Apply Kernel Variables...
[ 18.693594] systemd[1]: Mounted FUSE Control File System.
[ 18.717867] systemd[1]: Mounted Kernel Configuration File System.
[ 18.737925] systemd[1]: Started Journal Service.
[ 18.843553] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 18.900078] systemd-journald[146]: Received client request to flush runtime journal.
[ 18.908223] systemd-journald[146]: File /var/log/journal/5c71b33d54d54b56a83192f2a7dd0c26/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 19.868410] mc: Linux media interface: v0.10
[ 20.022952] videodev: Linux video capture interface: v2.00
[ 20.085706] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.116995] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 20.117044] [vc_sm_connected_init]: start
[ 20.126068] [vc_sm_connected_init]: installed successfully
[ 20.165594] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.178502] bcm2835_audio bcm2835_audio: there is not valid maps for state default
[ 20.222178] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.231807] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.236649] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 20.237863] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 20.238268] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.251942] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.269008] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 20.270311] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 20.296440] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 20.333534] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.339814] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 20.371042] rpivid feb10000.codec: Device registered as /dev/video19
[ 20.383685] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 20.383742] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 20.383765] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 20.383784] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 20.383826] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 20.425869] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 20.426721] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 20.427593] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 20.427623] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 20.427682] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 20.435536] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 20.435595] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 20.435638] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 20.435657] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 20.435674] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 20.436031] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 20.555668] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 20.558412] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 20.572482] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 20.572563] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 20.609906] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 20.609978] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 20.617966] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 20.618066] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 20.700103] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 21.480722] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff)
[ 21.480772] fb0: switching to vc4 from simple
[ 21.490606] Console: switching to colour dummy device 80x25
[ 21.538621] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 21.541009] Registered IR keymap rc-cec
[ 21.541283] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 21.541508] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 21.549809] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 21.560367] Registered IR keymap rc-cec
[ 21.560599] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 21.560831] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 21.567421] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 21.567959] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 21.568349] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.568694] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569042] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569502] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.569876] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 21.586325] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 21.683816] Console: switching to colour frame buffer device 240x67
[ 21.712387] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 22.009917] 8021q: 802.1Q VLAN Support v1.8
[ 22.086183] uart-pl011 fe201000.serial: no DMA platform data
[ 22.096980] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 22.360820] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 22.389520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.397905] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 22.488754] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 22.490537] bcmgenet fd580000.ethernet eth0: Link is Down
[ 26.589395] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 26.589433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-14 20:14 ` Bjorn Helgaas
-1 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-14 20:14 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
It'd be nice to mention the property names (maybe omit the "brcm,"
prefix if that helps) in the commit log so "git log --oneline" is more
useful:
959e000f0463 ("dt-bindings: PCI: brcmstb: Add two optional props")
ea372f45cfff ("dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators")
504253e44a9d ("dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.")
145790e55d82 ("dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs")
5e8a7d26d935 ("dt-bindings: PCI: brcmstb: compatible is required")
f435ce7ebf8c ("dt-bindings: PCI: brcmstb: add BCM4908 binding")
On Tue, Apr 11, 2023 at 12:59:16PM -0400, Jim Quinlan wrote:
> Regarding "brcm,enable-l1ss":
>
> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> requires the driver probe() to deliberately place the HW one of three
> CLKREQ# modes:
>
> (a) CLKREQ# driven by the RC unconditionally
> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>
> The HW+driver can tell the difference between downstream devices that
> need (a) and (b), but does not know when to configure (c). Further, the
> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> that (c) is desired. Setting this property only makes sense when the
> downstream device is L1SS-capable and the OS is configured to activate
> this mode (e.g. policy==superpowersave).
>
> This property is already present in the Raspian version of Linux, but the
> upstream driver implementaion that will follow adds more details and
> discerns between (a) and (b).
>
> Regarding "brcm,completion-timeout-us"
>
> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> PCIe transaction completion abort timeout. We've been asked to make this
> configurable, so we are introducing "brcm,completion-timeout-us".
Completion Timeout is a generic PCIe concept. Do we want a generic
(non-brcm) name that would be documented elsewhere? Rob?
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> ---
> .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 7e15aae7d69e..f7fc2f6561bb 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -64,6 +64,22 @@ properties:
>
> aspm-no-l0s: true
>
> + brcm,enable-l1ss:
> + description: Indicates that PCIe L1SS power savings
> + are desired, the downstream device is L1SS-capable, and the
> + OS has been configured to enable this mode. Note that when
> + in this mode, this particular HW may not meet the requirement
> + that requires CLKREQ# assertion to clock active to be
> + within 400ns.
Maybe a pointer to the source of the 400ns requirement?
"requirement that requires" is a little redundant, maybe "... may not
meet the requirement that Refclk be valid within 400ns of CLKREQ#
assertion"?
(I don't actually know whether this refers to Refclk or if that would
be a true statement; this is just a possible sentence structure.)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-14 20:14 ` Bjorn Helgaas
0 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-14 20:14 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
It'd be nice to mention the property names (maybe omit the "brcm,"
prefix if that helps) in the commit log so "git log --oneline" is more
useful:
959e000f0463 ("dt-bindings: PCI: brcmstb: Add two optional props")
ea372f45cfff ("dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators")
504253e44a9d ("dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.")
145790e55d82 ("dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs")
5e8a7d26d935 ("dt-bindings: PCI: brcmstb: compatible is required")
f435ce7ebf8c ("dt-bindings: PCI: brcmstb: add BCM4908 binding")
On Tue, Apr 11, 2023 at 12:59:16PM -0400, Jim Quinlan wrote:
> Regarding "brcm,enable-l1ss":
>
> The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> requires the driver probe() to deliberately place the HW one of three
> CLKREQ# modes:
>
> (a) CLKREQ# driven by the RC unconditionally
> (b) CLKREQ# driven by the EP for ASPM L0s, L1
> (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
>
> The HW+driver can tell the difference between downstream devices that
> need (a) and (b), but does not know when to configure (c). Further, the
> HW may cause a CPU abort on boot if guesses wrong regarding the need for
> (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> that (c) is desired. Setting this property only makes sense when the
> downstream device is L1SS-capable and the OS is configured to activate
> this mode (e.g. policy==superpowersave).
>
> This property is already present in the Raspian version of Linux, but the
> upstream driver implementaion that will follow adds more details and
> discerns between (a) and (b).
>
> Regarding "brcm,completion-timeout-us"
>
> Our HW will cause a CPU abort if the L1SS exit time is longer than the
> PCIe transaction completion abort timeout. We've been asked to make this
> configurable, so we are introducing "brcm,completion-timeout-us".
Completion Timeout is a generic PCIe concept. Do we want a generic
(non-brcm) name that would be documented elsewhere? Rob?
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> ---
> .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 7e15aae7d69e..f7fc2f6561bb 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -64,6 +64,22 @@ properties:
>
> aspm-no-l0s: true
>
> + brcm,enable-l1ss:
> + description: Indicates that PCIe L1SS power savings
> + are desired, the downstream device is L1SS-capable, and the
> + OS has been configured to enable this mode. Note that when
> + in this mode, this particular HW may not meet the requirement
> + that requires CLKREQ# assertion to clock active to be
> + within 400ns.
Maybe a pointer to the source of the 400ns requirement?
"requirement that requires" is a little redundant, maybe "... may not
meet the requirement that Refclk be valid within 400ns of CLKREQ#
assertion"?
(I don't actually know whether this refers to Refclk or if that would
be a true statement; this is just a possible sentence structure.)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-11 16:59 ` Jim Quinlan
@ 2023-04-14 20:27 ` Bjorn Helgaas
-1 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-14 20:27 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
This subject line no verb. Can you add a leading verb to suggest what
this patch does?
s/accomodations/accommodations/
On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
> deliberately set by the probe() into one of three mutually exclusive modes:
>
> (a) No CLKREQ# expected or required, refclk is always available.
> (b) CLKREQ# is expected to be driven by downstream device when needed.
> (c) Bidirectional CLKREQ# for L1SS capable devices.
>
> Previously, only (b) was supported by the driver, as almost all STB/CM
> boards operate in this mode. But now there is interest in activating L1SS
> power savings from STB/CM customers, and also interest in accomodating mode
> (a) for designs such as the RPi CM4 with IO board.
accommodating
> The HW+driver is able to tell us when mode (a) mode is needed. But there
> is no easy way to tell if L1SS mode should be configured. In certain
> situations, getting this wrong may cause a panic during boot time. So we
> rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> Using this mode only makes sense when the downstream device is L1SS-capable
> and the OS has been configured to activate L1SS
> (e.g. policy==powersupersave).
I'm really concerned about the user experience here. I assume users
do not want to edit the DT based on what device they plug in. They
shouldn't need to (and probably won't) know whether the device
supports L1SS.
I hate kernel/module parameters, but I think even that would be better
then having to edit the DT.
There's obviously a period of time when L1SS is supported but not yet
enabled, so I'm *guessing* the "OS has been configured to activate
L1SS" is not actually a requirement, and choosing (c) really just
opens the possibility that L1SS can be used?
Would be nice to have a hint (maybe a line or two of the panic
message) to help users find the fix for a problem they're seeing.
Obviously the ideal would be if we could use (c) in all cases, so I
assume that's where a panic might happen. What situation would that
be? An endpoint that doesn't support L1SS? One that supports L1SS
but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
LTR values programmed wrong?
Bjorn
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 20:27 ` Bjorn Helgaas
0 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-14 20:27 UTC (permalink / raw)
To: Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
This subject line no verb. Can you add a leading verb to suggest what
this patch does?
s/accomodations/accommodations/
On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
> deliberately set by the probe() into one of three mutually exclusive modes:
>
> (a) No CLKREQ# expected or required, refclk is always available.
> (b) CLKREQ# is expected to be driven by downstream device when needed.
> (c) Bidirectional CLKREQ# for L1SS capable devices.
>
> Previously, only (b) was supported by the driver, as almost all STB/CM
> boards operate in this mode. But now there is interest in activating L1SS
> power savings from STB/CM customers, and also interest in accomodating mode
> (a) for designs such as the RPi CM4 with IO board.
accommodating
> The HW+driver is able to tell us when mode (a) mode is needed. But there
> is no easy way to tell if L1SS mode should be configured. In certain
> situations, getting this wrong may cause a panic during boot time. So we
> rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> Using this mode only makes sense when the downstream device is L1SS-capable
> and the OS has been configured to activate L1SS
> (e.g. policy==powersupersave).
I'm really concerned about the user experience here. I assume users
do not want to edit the DT based on what device they plug in. They
shouldn't need to (and probably won't) know whether the device
supports L1SS.
I hate kernel/module parameters, but I think even that would be better
then having to edit the DT.
There's obviously a period of time when L1SS is supported but not yet
enabled, so I'm *guessing* the "OS has been configured to activate
L1SS" is not actually a requirement, and choosing (c) really just
opens the possibility that L1SS can be used?
Would be nice to have a hint (maybe a line or two of the panic
message) to help users find the fix for a problem they're seeing.
Obviously the ideal would be if we could use (c) in all cases, so I
assume that's where a panic might happen. What situation would that
be? An endpoint that doesn't support L1SS? One that supports L1SS
but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
LTR values programmed wrong?
Bjorn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 20:27 ` Bjorn Helgaas
@ 2023-04-14 20:33 ` Florian Fainelli
-1 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-14 20:33 UTC (permalink / raw)
To: Bjorn Helgaas, Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/14/23 13:27, Bjorn Helgaas wrote:
> This subject line no verb. Can you add a leading verb to suggest what
> this patch does?
>
> s/accomodations/accommodations/
>
> On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
>> The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
>> deliberately set by the probe() into one of three mutually exclusive modes:
>>
>> (a) No CLKREQ# expected or required, refclk is always available.
>> (b) CLKREQ# is expected to be driven by downstream device when needed.
>> (c) Bidirectional CLKREQ# for L1SS capable devices.
>>
>> Previously, only (b) was supported by the driver, as almost all STB/CM
>> boards operate in this mode. But now there is interest in activating L1SS
>> power savings from STB/CM customers, and also interest in accomodating mode
>> (a) for designs such as the RPi CM4 with IO board.
>
> accommodating
>
>> The HW+driver is able to tell us when mode (a) mode is needed. But there
>> is no easy way to tell if L1SS mode should be configured. In certain
>> situations, getting this wrong may cause a panic during boot time. So we
>> rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
>> Using this mode only makes sense when the downstream device is L1SS-capable
>> and the OS has been configured to activate L1SS
>> (e.g. policy==powersupersave).
>
> I'm really concerned about the user experience here. I assume users
> do not want to edit the DT based on what device they plug in. They
> shouldn't need to (and probably won't) know whether the device
> supports L1SS.
>
> I hate kernel/module parameters, but I think even that would be better
> then having to edit the DT.
The problem I see with kernel/module parameters is that it is really
hard to differentiate whether they should be applied across all
instances of the device/drivers or just for one in particular.
The Raspberry Pi 4 is a single pcie-brcmstb instance, but we have other
systems supported by that driver on Set-top-box and Cable Modem chips
for instance where we may have different types of end-points being
connected, some of which could be Multi-chip-module (MCM) where
everything is known ahead of time, and sometimes cards that are plugged
to full-sized PCIe or mini-PCIe connectors, where some amount of runtime
discoverability is involved.
Without inventing some custom modular parameter syntax, it may not work
that well. The Device Tree properties at least easily allow for
per-instance configuration.
>
> There's obviously a period of time when L1SS is supported but not yet
> enabled, so I'm *guessing* the "OS has been configured to activate
> L1SS" is not actually a requirement, and choosing (c) really just
> opens the possibility that L1SS can be used?
>
> Would be nice to have a hint (maybe a line or two of the panic
> message) to help users find the fix for a problem they're seeing.
>
> Obviously the ideal would be if we could use (c) in all cases, so I
> assume that's where a panic might happen. What situation would that
> be? An endpoint that doesn't support L1SS? One that supports L1SS
> but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
> LTR values programmed wrong?
>
> Bjorn
--
Florian
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 20:33 ` Florian Fainelli
0 siblings, 0 replies; 57+ messages in thread
From: Florian Fainelli @ 2023-04-14 20:33 UTC (permalink / raw)
To: Bjorn Helgaas, Jim Quinlan
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On 4/14/23 13:27, Bjorn Helgaas wrote:
> This subject line no verb. Can you add a leading verb to suggest what
> this patch does?
>
> s/accomodations/accommodations/
>
> On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
>> The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
>> deliberately set by the probe() into one of three mutually exclusive modes:
>>
>> (a) No CLKREQ# expected or required, refclk is always available.
>> (b) CLKREQ# is expected to be driven by downstream device when needed.
>> (c) Bidirectional CLKREQ# for L1SS capable devices.
>>
>> Previously, only (b) was supported by the driver, as almost all STB/CM
>> boards operate in this mode. But now there is interest in activating L1SS
>> power savings from STB/CM customers, and also interest in accomodating mode
>> (a) for designs such as the RPi CM4 with IO board.
>
> accommodating
>
>> The HW+driver is able to tell us when mode (a) mode is needed. But there
>> is no easy way to tell if L1SS mode should be configured. In certain
>> situations, getting this wrong may cause a panic during boot time. So we
>> rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
>> Using this mode only makes sense when the downstream device is L1SS-capable
>> and the OS has been configured to activate L1SS
>> (e.g. policy==powersupersave).
>
> I'm really concerned about the user experience here. I assume users
> do not want to edit the DT based on what device they plug in. They
> shouldn't need to (and probably won't) know whether the device
> supports L1SS.
>
> I hate kernel/module parameters, but I think even that would be better
> then having to edit the DT.
The problem I see with kernel/module parameters is that it is really
hard to differentiate whether they should be applied across all
instances of the device/drivers or just for one in particular.
The Raspberry Pi 4 is a single pcie-brcmstb instance, but we have other
systems supported by that driver on Set-top-box and Cable Modem chips
for instance where we may have different types of end-points being
connected, some of which could be Multi-chip-module (MCM) where
everything is known ahead of time, and sometimes cards that are plugged
to full-sized PCIe or mini-PCIe connectors, where some amount of runtime
discoverability is involved.
Without inventing some custom modular parameter syntax, it may not work
that well. The Device Tree properties at least easily allow for
per-instance configuration.
>
> There's obviously a period of time when L1SS is supported but not yet
> enabled, so I'm *guessing* the "OS has been configured to activate
> L1SS" is not actually a requirement, and choosing (c) really just
> opens the possibility that L1SS can be used?
>
> Would be nice to have a hint (maybe a line or two of the panic
> message) to help users find the fix for a problem they're seeing.
>
> Obviously the ideal would be if we could use (c) in all cases, so I
> assume that's where a panic might happen. What situation would that
> be? An endpoint that doesn't support L1SS? One that supports L1SS
> but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
> LTR values programmed wrong?
>
> Bjorn
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 20:27 ` Bjorn Helgaas
@ 2023-04-14 23:14 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 23:14 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 4:27 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> This subject line no verb. Can you add a leading verb to suggest what
> this patch does?
>
> s/accomodations/accommodations/
>
> On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> > The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
> > deliberately set by the probe() into one of three mutually exclusive modes:
> >
> > (a) No CLKREQ# expected or required, refclk is always available.
> > (b) CLKREQ# is expected to be driven by downstream device when needed.
> > (c) Bidirectional CLKREQ# for L1SS capable devices.
> >
> > Previously, only (b) was supported by the driver, as almost all STB/CM
> > boards operate in this mode. But now there is interest in activating L1SS
> > power savings from STB/CM customers, and also interest in accomodating mode
> > (a) for designs such as the RPi CM4 with IO board.
>
> accommodating
>
> > The HW+driver is able to tell us when mode (a) mode is needed. But there
> > is no easy way to tell if L1SS mode should be configured. In certain
> > situations, getting this wrong may cause a panic during boot time. So we
> > rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> > Using this mode only makes sense when the downstream device is L1SS-capable
> > and the OS has been configured to activate L1SS
> > (e.g. policy==powersupersave).
>
> I'm really concerned about the user experience here. I assume users
> do not want to edit the DT based on what device they plug in. They
> shouldn't need to (and probably won't) know whether the device
> supports L1SS.
>
> I hate kernel/module parameters, but I think even that would be better
> then having to edit the DT.
>
> There's obviously a period of time when L1SS is supported but not yet
> enabled, so I'm *guessing* the "OS has been configured to activate
> L1SS" is not actually a requirement, and choosing (c) really just
> opens the possibility that L1SS can be used?
Yes. Before this patch series we had two panic scenarios:
(a) Endpoint devices with no CLKREQ# connection
(b) Endpoints that are L1SS-capable
Even without the "brcm,enable-l1ss" property present, both (a) and
(b) should be eliminated.
The reason (b) is eliminated is because the RC driver now unadvertises
RC L1SS by default; subsequently, Linux does
not turn it on. So the default setting should be fine for all devices.
For those folks who have L1SS capable devices and desire L1SS power
savings, they can add
the brcm,enable-l1ss property. But everyone should have functionality
w/o doing anything.
As I am typing this I realize that my comments and dev_info()s are not
aligned with what I am saying so I will change them in V3. Sorry
about the confusion.
>
> Would be nice to have a hint (maybe a line or two of the panic
> message) to help users find the fix for a problem they're seeing.SS
>
> Obviously the ideal would be if we could use (c) in all cases, so I
> assume that's where a panic might happen. What situation would that
> be? An endpoint that doesn't support L1SS? One that supports L1SS
> but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
> LTR values programmed wrong?
Let me test everything on Monday and get back to you before I make any
statements.
Regards,
Jim Quinilan
Broadcom STB
>
> Bjorn
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-14 23:14 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-14 23:14 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Florian Fainelli,
Lorenzo Pieralisi, Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 4:27 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> This subject line no verb. Can you add a leading verb to suggest what
> this patch does?
>
> s/accomodations/accommodations/
>
> On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> > The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
> > deliberately set by the probe() into one of three mutually exclusive modes:
> >
> > (a) No CLKREQ# expected or required, refclk is always available.
> > (b) CLKREQ# is expected to be driven by downstream device when needed.
> > (c) Bidirectional CLKREQ# for L1SS capable devices.
> >
> > Previously, only (b) was supported by the driver, as almost all STB/CM
> > boards operate in this mode. But now there is interest in activating L1SS
> > power savings from STB/CM customers, and also interest in accomodating mode
> > (a) for designs such as the RPi CM4 with IO board.
>
> accommodating
>
> > The HW+driver is able to tell us when mode (a) mode is needed. But there
> > is no easy way to tell if L1SS mode should be configured. In certain
> > situations, getting this wrong may cause a panic during boot time. So we
> > rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> > Using this mode only makes sense when the downstream device is L1SS-capable
> > and the OS has been configured to activate L1SS
> > (e.g. policy==powersupersave).
>
> I'm really concerned about the user experience here. I assume users
> do not want to edit the DT based on what device they plug in. They
> shouldn't need to (and probably won't) know whether the device
> supports L1SS.
>
> I hate kernel/module parameters, but I think even that would be better
> then having to edit the DT.
>
> There's obviously a period of time when L1SS is supported but not yet
> enabled, so I'm *guessing* the "OS has been configured to activate
> L1SS" is not actually a requirement, and choosing (c) really just
> opens the possibility that L1SS can be used?
Yes. Before this patch series we had two panic scenarios:
(a) Endpoint devices with no CLKREQ# connection
(b) Endpoints that are L1SS-capable
Even without the "brcm,enable-l1ss" property present, both (a) and
(b) should be eliminated.
The reason (b) is eliminated is because the RC driver now unadvertises
RC L1SS by default; subsequently, Linux does
not turn it on. So the default setting should be fine for all devices.
For those folks who have L1SS capable devices and desire L1SS power
savings, they can add
the brcm,enable-l1ss property. But everyone should have functionality
w/o doing anything.
As I am typing this I realize that my comments and dev_info()s are not
aligned with what I am saying so I will change them in V3. Sorry
about the confusion.
>
> Would be nice to have a hint (maybe a line or two of the panic
> message) to help users find the fix for a problem they're seeing.SS
>
> Obviously the ideal would be if we could use (c) in all cases, so I
> assume that's where a panic might happen. What situation would that
> be? An endpoint that doesn't support L1SS? One that supports L1SS
> but it's not enabled? Maybe if L1SS isn't configured correctly, e.g.,
> LTR values programmed wrong?
Let me test everything on Monday and get back to you before I make any
statements.
Regards,
Jim Quinilan
Broadcom STB
>
> Bjorn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 20:33 ` Florian Fainelli
@ 2023-04-17 21:41 ` Bjorn Helgaas
-1 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-17 21:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 01:33:29PM -0700, Florian Fainelli wrote:
> On 4/14/23 13:27, Bjorn Helgaas wrote:
> > On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> ...
> > > The HW+driver is able to tell us when mode (a) mode is needed. But there
> > > is no easy way to tell if L1SS mode should be configured. In certain
> > > situations, getting this wrong may cause a panic during boot time. So we
> > > rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> > > Using this mode only makes sense when the downstream device is L1SS-capable
> > > and the OS has been configured to activate L1SS
> > > (e.g. policy==powersupersave).
> >
> > I'm really concerned about the user experience here. I assume users
> > do not want to edit the DT based on what device they plug in. They
> > shouldn't need to (and probably won't) know whether the device
> > supports L1SS.
> >
> > I hate kernel/module parameters, but I think even that would be better
> > then having to edit the DT.
>
> The problem I see with kernel/module parameters is that it is really hard to
> differentiate whether they should be applied across all instances of the
> device/drivers or just for one in particular.
>
> The Raspberry Pi 4 is a single pcie-brcmstb instance, but we have other
> systems supported by that driver on Set-top-box and Cable Modem chips for
> instance where we may have different types of end-points being connected,
> some of which could be Multi-chip-module (MCM) where everything is known
> ahead of time, and sometimes cards that are plugged to full-sized PCIe or
> mini-PCIe connectors, where some amount of runtime discoverability is
> involved.
>
> Without inventing some custom modular parameter syntax, it may not work that
> well. The Device Tree properties at least easily allow for per-instance
> configuration.
We do have this already (from
Documentation/admin-guide/kernel-parameters.txt):
pci=option[,option...] [PCI] various PCI subsystem options.
Some options herein operate on a specific device
or a set of devices (<pci_dev>). These are
specified in one of the following formats:
[<domain>:]<bus>:<dev>.<func>[/<dev>.<func>]*
pci:<vendor>:<device>[:<subvendor>:<subdevice>]
Note: the first format specifies a PCI
bus/device/function address which may change
if new hardware is inserted, if motherboard
firmware changes, or due to changes caused
by other kernel parameters. If the
domain is left unspecified, it is
taken to be zero. Optionally, a path
to a device through multiple device/function
addresses can be specified after the base
address (this is more robust against
renumbering issues). The second format
selects devices using IDs from the
configuration space which may match multiple
devices in the system.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-17 21:41 ` Bjorn Helgaas
0 siblings, 0 replies; 57+ messages in thread
From: Bjorn Helgaas @ 2023-04-17 21:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, linux-pci, Nicolas Saenz Julienne, Bjorn Helgaas,
Lorenzo Pieralisi, Cyril Brulebois, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 01:33:29PM -0700, Florian Fainelli wrote:
> On 4/14/23 13:27, Bjorn Helgaas wrote:
> > On Tue, Apr 11, 2023 at 12:59:17PM -0400, Jim Quinlan wrote:
> ...
> > > The HW+driver is able to tell us when mode (a) mode is needed. But there
> > > is no easy way to tell if L1SS mode should be configured. In certain
> > > situations, getting this wrong may cause a panic during boot time. So we
> > > rely on the DT prop "brcm,enable-l1ss" to tell us when mode (c) is desired.
> > > Using this mode only makes sense when the downstream device is L1SS-capable
> > > and the OS has been configured to activate L1SS
> > > (e.g. policy==powersupersave).
> >
> > I'm really concerned about the user experience here. I assume users
> > do not want to edit the DT based on what device they plug in. They
> > shouldn't need to (and probably won't) know whether the device
> > supports L1SS.
> >
> > I hate kernel/module parameters, but I think even that would be better
> > then having to edit the DT.
>
> The problem I see with kernel/module parameters is that it is really hard to
> differentiate whether they should be applied across all instances of the
> device/drivers or just for one in particular.
>
> The Raspberry Pi 4 is a single pcie-brcmstb instance, but we have other
> systems supported by that driver on Set-top-box and Cable Modem chips for
> instance where we may have different types of end-points being connected,
> some of which could be Multi-chip-module (MCM) where everything is known
> ahead of time, and sometimes cards that are plugged to full-sized PCIe or
> mini-PCIe connectors, where some amount of runtime discoverability is
> involved.
>
> Without inventing some custom modular parameter syntax, it may not work that
> well. The Device Tree properties at least easily allow for per-instance
> configuration.
We do have this already (from
Documentation/admin-guide/kernel-parameters.txt):
pci=option[,option...] [PCI] various PCI subsystem options.
Some options herein operate on a specific device
or a set of devices (<pci_dev>). These are
specified in one of the following formats:
[<domain>:]<bus>:<dev>.<func>[/<dev>.<func>]*
pci:<vendor>:<device>[:<subvendor>:<subdevice>]
Note: the first format specifies a PCI
bus/device/function address which may change
if new hardware is inserted, if motherboard
firmware changes, or due to changes caused
by other kernel parameters. If the
domain is left unspecified, it is
taken to be zero. Optionally, a path
to a device through multiple device/function
addresses can be specified after the base
address (this is more robust against
renumbering issues). The second format
selects devices using IDs from the
configuration space which may match multiple
devices in the system.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 16:12 ` Florian Fainelli
@ 2023-04-18 18:35 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2023-04-18 18:35 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, Krzysztof Kozlowski, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 09:12:07AM -0700, Florian Fainelli wrote:
> On 4/12/23 08:37, Rob Herring wrote:
> > On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
> > > On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
> > > <krzysztof.kozlowski@linaro.org> wrote:
> > > >
> > > > On 12/04/2023 13:49, Florian Fainelli wrote:
> > > > >
> > > > >
> > > > > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> > > > > > On 11/04/2023 18:59, Jim Quinlan wrote:
> > > > > > > Regarding "brcm,enable-l1ss":
> > > > > > >
> > > > > > > The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> > > > > > > requires the driver probe() to deliberately place the HW one of three
> > > > > > > CLKREQ# modes:
> > > > > > >
> > > > > > > (a) CLKREQ# driven by the RC unconditionally
> > > > > > > (b) CLKREQ# driven by the EP for ASPM L0s, L1
> > > > > > > (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> > > > > > >
> > > > > > > The HW+driver can tell the difference between downstream devices that
> > > > > > > need (a) and (b), but does not know when to configure (c). Further, the
> > > > > > > HW may cause a CPU abort on boot if guesses wrong regarding the need for
> > > > > > > (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> > > > > > > that (c) is desired. Setting this property only makes sense when the
> > > > > > > downstream device is L1SS-capable and the OS is configured to activate
> > > > > > > this mode (e.g. policy==superpowersave).
> > > > > > >
> > > > > > > This property is already present in the Raspian version of Linux, but the
> > > > > > > upstream driver implementaion that will follow adds more details and
> > > > > >
> > > > > > typo, implementation
> > > > > >
> > > > > > > discerns between (a) and (b).
> > > > > > >
> > > > > > > Regarding "brcm,completion-timeout-us"
> > > > > > >
> > > > > > > Our HW will cause a CPU abort if the L1SS exit time is longer than the
> > > > > > > PCIe transaction completion abort timeout. We've been asked to make this
> > > > > > > configurable, so we are introducing "brcm,completion-timeout-us".
> > > > > > >
> > > > > > > Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> > > > > >
> > > > > > What happened here? Where is the changelog?
> > > > >
> > > > > It is in the cover letter:
> > > > >
> > > > > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> > > > >
> > > > > but it does not look like the cover letter was copied to you or Rob.
> > > >
> > > > As you said, I did not get it.
> > >
> > > Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
> > > I need to modify one or both scripts to send the cover to the
> > > superset of recipients in the constituent commits.
> >
> > Try out 'b4'. It's much easier.
> >
> > In any case, I don't read cover letters. Changes to a patch belong with
> > the patch.
>
> This is not what most other maintainers do, and there does not appear to be
> a general consensus amongst maintainers that the changes belong in the
> individual patches, or in the cover letter.
Well, I stole that phrase from someone else (gregkh).
> Some trees like the networking
> tree do merge commits of patch sets where the cover letter is used as part
> of the merge commit message. Other maintainers don't, and some want the
> change log after the '---' and some do not.
I'm not aware of anyone except for DRM wanting the changelog in the
final commits, but that's really a different issue.
I'm pretty sure no one will complain about a changelog in the patches. I
guess you just have to duplicate it if you think it should be in both.
b4 could be taught to do that I suppose. IMO, the cover letter should
have a higher level changelog than the individual patches.
Rob
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-18 18:35 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2023-04-18 18:35 UTC (permalink / raw)
To: Florian Fainelli
Cc: Jim Quinlan, Krzysztof Kozlowski, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 12, 2023 at 09:12:07AM -0700, Florian Fainelli wrote:
> On 4/12/23 08:37, Rob Herring wrote:
> > On Wed, Apr 12, 2023 at 10:14:46AM -0400, Jim Quinlan wrote:
> > > On Wed, Apr 12, 2023 at 7:56 AM Krzysztof Kozlowski
> > > <krzysztof.kozlowski@linaro.org> wrote:
> > > >
> > > > On 12/04/2023 13:49, Florian Fainelli wrote:
> > > > >
> > > > >
> > > > > On 4/12/2023 1:09 AM, Krzysztof Kozlowski wrote:
> > > > > > On 11/04/2023 18:59, Jim Quinlan wrote:
> > > > > > > Regarding "brcm,enable-l1ss":
> > > > > > >
> > > > > > > The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> > > > > > > requires the driver probe() to deliberately place the HW one of three
> > > > > > > CLKREQ# modes:
> > > > > > >
> > > > > > > (a) CLKREQ# driven by the RC unconditionally
> > > > > > > (b) CLKREQ# driven by the EP for ASPM L0s, L1
> > > > > > > (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> > > > > > >
> > > > > > > The HW+driver can tell the difference between downstream devices that
> > > > > > > need (a) and (b), but does not know when to configure (c). Further, the
> > > > > > > HW may cause a CPU abort on boot if guesses wrong regarding the need for
> > > > > > > (c). So we introduce the boolean "brcm,enable-l1ss" property to indicate
> > > > > > > that (c) is desired. Setting this property only makes sense when the
> > > > > > > downstream device is L1SS-capable and the OS is configured to activate
> > > > > > > this mode (e.g. policy==superpowersave).
> > > > > > >
> > > > > > > This property is already present in the Raspian version of Linux, but the
> > > > > > > upstream driver implementaion that will follow adds more details and
> > > > > >
> > > > > > typo, implementation
> > > > > >
> > > > > > > discerns between (a) and (b).
> > > > > > >
> > > > > > > Regarding "brcm,completion-timeout-us"
> > > > > > >
> > > > > > > Our HW will cause a CPU abort if the L1SS exit time is longer than the
> > > > > > > PCIe transaction completion abort timeout. We've been asked to make this
> > > > > > > configurable, so we are introducing "brcm,completion-timeout-us".
> > > > > > >
> > > > > > > Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> > > > > >
> > > > > > What happened here? Where is the changelog?
> > > > >
> > > > > It is in the cover letter:
> > > > >
> > > > > https://lore.kernel.org/all/20230411165919.23955-1-jim2101024@gmail.com/
> > > > >
> > > > > but it does not look like the cover letter was copied to you or Rob.
> > > >
> > > > As you said, I did not get it.
> > >
> > > Yes, sorry about that; I use a wrapper over the "cocci_cc" script and
> > > I need to modify one or both scripts to send the cover to the
> > > superset of recipients in the constituent commits.
> >
> > Try out 'b4'. It's much easier.
> >
> > In any case, I don't read cover letters. Changes to a patch belong with
> > the patch.
>
> This is not what most other maintainers do, and there does not appear to be
> a general consensus amongst maintainers that the changes belong in the
> individual patches, or in the cover letter.
Well, I stole that phrase from someone else (gregkh).
> Some trees like the networking
> tree do merge commits of patch sets where the cover letter is used as part
> of the merge commit message. Other maintainers don't, and some want the
> change log after the '---' and some do not.
I'm not aware of anyone except for DRM wanting the changelog in the
final commits, but that's really a different issue.
I'm pretty sure no one will complain about a changelog in the patches. I
guess you just have to duplicate it if you think it should be in both.
b4 could be taught to do that I suppose. IMO, the cover letter should
have a higher level changelog than the individual patches.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-14 16:19 ` Cyril Brulebois
@ 2023-04-19 14:23 ` Jim Quinlan
-1 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-19 14:23 UTC (permalink / raw)
To: Cyril Brulebois
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 12:19 PM Cyril Brulebois <kibi@debian.org> wrote:
>
> Florian Fainelli <f.fainelli@gmail.com> (2023-04-14):
> > Cyril, based upon the table and logs you provided whereby you have used the
> > following:
> >
> > - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> > - Raspberry Pi Compute Module 4 IO Board
> > - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >
> > in the before/unpatched case we have a PCIe link down and in the
> > after/patched we have a PCIe link up but a kernel panic. Neither are great
> > nor resulting in a fully functional PCIe device.
>
> Based on Jim's feedback, I'm attaching a new dmesg for the aforementioned
> setup, with an unpatched kernel (dmesg-unpatched-pcie-link-up.txt).
Hello Cyril,
I'm still seeing things in the logs that do not make sense to me.
First, the "unpatched" version logs -- including the Raspian case --
all have the following lines:
[ 0.000000] Movable zone start for each node
/* ... */
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
The above lines are also in my logs. But they are missing from your
"after patch" logs -- what did you change to have these lines
disappear on the patched logs?
Second, you say that you used a different "CM4" from the one used in
the Bugzilla report -- what do you mean by that? Are you referring
to the CM4 module proper, whose only change was going from 4GB to 8GB,
or the IO board being used? My testing is done with a standard RPi
CM4 and standard RPi IO board. Before this patch series, the only way
this standard configuration can work for most hobbyist PCI cards (i.e.
floating CLKREQ# pin) is by using Raspian AND adding
"brcm,enable-l1ss" to the DT node.
I'm guessing that you are using the configuration that you described
to me in a personal email: "[the] chip is embedded directly on the
modified PCB, as opposed to plugged into the PCIe slot on the official
CM4 IO Board". If true, you are testing on a configuration that (a)
is unique to you and your group and (b) must be doing something with
the CLKREQ# signal so that your "before" case does not panic. Is this
the case?
Finally, and this is a big one, is the fact that in both of the
"before" and "after" cases the value written to the internal Brcm
CLKREQ# register is the same.
This is evident by this line in the "after" patch: "brcm-pcie
fd500000.pcie: uni-dir CLKREQ# for ASPM". This mode is the only mode
supported by the "before"
case. Now there are some other things going on in the patch series
-- reading two registers and extending the timeout value of a
completion abort, but I'm having
a hard time imagining how they could cause a panic.
Regards,
Jim
PS Can you please include in your logs the output of "sudo lspci
-vvv" for those cases that boot to prompt?
>
> I fear that initially I might have not waited enough before power off and
> power on when replugging the SupaHub adapter, and I've only seen the PCIe
> link down a few times (now that I'm actively paying attention to that
> part). I'm indeed seeing PCIe link up consistently (100%) when using the
> following method:
>
> for i in $(seq 1 20); do
> # power on, let the system boot up and settle:
> sispmctl -t 4; sleep 2m
> ssh cm4 sh -c "dmesg > dmesg-$i.txt; poweroff"
> # let the system power down, and power off:
> sleep 30; sispmctl -t 4
> # wait before power cycling:
> sleep 10
> done
>
> > Looking at:
> > https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
> >
> > it would appear that it can accept an external power supply, do you have one
> > connected to that USB expansion card by any chance?
>
> With the patched kernel, I have tried several things (leaving the regular
> 12V adapter plugged in all the time):
> - No external power supply (that's what I've been using in all previous
> attempts).
> - Using a 5V PSU with 2 pins (ground and 5V) plugged on the Ext PSU
> 4-pin header on the IO Board.
> - Using a 5V PSU with a SATA connector plugged directly onto the SupaHub
> adapter.
>
> I'm getting the same trace in all cases.
>
> > Are you able to boot the kernel before/after if you disconnect any USB
> > peripheral?
>
> The trace is obtained without any USB peripheral (on the extension card or
> on the onboard USB slots). Besides the SupaHub adapter on the PCIe slot, I
> only have Ethernet and HDMI plugged in (I'm getting traces via serial
> console, and operating the system over SSH when it boots fine).
>
> As soon as I unplug the SupaHub board itself, the system boots fine.
>
> > Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> > Raspberry Pi kernel tree?
>
> With the Raspberry Pi OS (64-bit) > Raspberry Pi OS Lite image
> (2023-02-21-raspios-bullseye-arm64-lite.img.xz), the system at least
> boots fine; I haven't tried adding devices to the mix just yet, trying
> to stick with that particular setup.
>
> A full dmesg is attached (dmesg-raspios.txt).
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-19 14:23 ` Jim Quinlan
0 siblings, 0 replies; 57+ messages in thread
From: Jim Quinlan @ 2023-04-19 14:23 UTC (permalink / raw)
To: Cyril Brulebois
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
On Fri, Apr 14, 2023 at 12:19 PM Cyril Brulebois <kibi@debian.org> wrote:
>
> Florian Fainelli <f.fainelli@gmail.com> (2023-04-14):
> > Cyril, based upon the table and logs you provided whereby you have used the
> > following:
> >
> > - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> > - Raspberry Pi Compute Module 4 IO Board
> > - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
> >
> > in the before/unpatched case we have a PCIe link down and in the
> > after/patched we have a PCIe link up but a kernel panic. Neither are great
> > nor resulting in a fully functional PCIe device.
>
> Based on Jim's feedback, I'm attaching a new dmesg for the aforementioned
> setup, with an unpatched kernel (dmesg-unpatched-pcie-link-up.txt).
Hello Cyril,
I'm still seeing things in the logs that do not make sense to me.
First, the "unpatched" version logs -- including the Raspian case --
all have the following lines:
[ 0.000000] Movable zone start for each node
/* ... */
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
The above lines are also in my logs. But they are missing from your
"after patch" logs -- what did you change to have these lines
disappear on the patched logs?
Second, you say that you used a different "CM4" from the one used in
the Bugzilla report -- what do you mean by that? Are you referring
to the CM4 module proper, whose only change was going from 4GB to 8GB,
or the IO board being used? My testing is done with a standard RPi
CM4 and standard RPi IO board. Before this patch series, the only way
this standard configuration can work for most hobbyist PCI cards (i.e.
floating CLKREQ# pin) is by using Raspian AND adding
"brcm,enable-l1ss" to the DT node.
I'm guessing that you are using the configuration that you described
to me in a personal email: "[the] chip is embedded directly on the
modified PCB, as opposed to plugged into the PCIe slot on the official
CM4 IO Board". If true, you are testing on a configuration that (a)
is unique to you and your group and (b) must be doing something with
the CLKREQ# signal so that your "before" case does not panic. Is this
the case?
Finally, and this is a big one, is the fact that in both of the
"before" and "after" cases the value written to the internal Brcm
CLKREQ# register is the same.
This is evident by this line in the "after" patch: "brcm-pcie
fd500000.pcie: uni-dir CLKREQ# for ASPM". This mode is the only mode
supported by the "before"
case. Now there are some other things going on in the patch series
-- reading two registers and extending the timeout value of a
completion abort, but I'm having
a hard time imagining how they could cause a panic.
Regards,
Jim
PS Can you please include in your logs the output of "sudo lspci
-vvv" for those cases that boot to prompt?
>
> I fear that initially I might have not waited enough before power off and
> power on when replugging the SupaHub adapter, and I've only seen the PCIe
> link down a few times (now that I'm actively paying attention to that
> part). I'm indeed seeing PCIe link up consistently (100%) when using the
> following method:
>
> for i in $(seq 1 20); do
> # power on, let the system boot up and settle:
> sispmctl -t 4; sleep 2m
> ssh cm4 sh -c "dmesg > dmesg-$i.txt; poweroff"
> # let the system power down, and power off:
> sleep 30; sispmctl -t 4
> # wait before power cycling:
> sleep 10
> done
>
> > Looking at:
> > https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
> >
> > it would appear that it can accept an external power supply, do you have one
> > connected to that USB expansion card by any chance?
>
> With the patched kernel, I have tried several things (leaving the regular
> 12V adapter plugged in all the time):
> - No external power supply (that's what I've been using in all previous
> attempts).
> - Using a 5V PSU with 2 pins (ground and 5V) plugged on the Ext PSU
> 4-pin header on the IO Board.
> - Using a 5V PSU with a SATA connector plugged directly onto the SupaHub
> adapter.
>
> I'm getting the same trace in all cases.
>
> > Are you able to boot the kernel before/after if you disconnect any USB
> > peripheral?
>
> The trace is obtained without any USB peripheral (on the extension card or
> on the onboard USB slots). Besides the SupaHub adapter on the PCIe slot, I
> only have Ethernet and HDMI plugged in (I'm getting traces via serial
> console, and operating the system over SSH when it boots fine).
>
> As soon as I unplug the SupaHub board itself, the system boots fine.
>
> > Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> > Raspberry Pi kernel tree?
>
> With the Raspberry Pi OS (64-bit) > Raspberry Pi OS Lite image
> (2023-02-21-raspios-bullseye-arm64-lite.img.xz), the system at least
> boots fine; I haven't tried adding devices to the mix just yet, trying
> to stick with that particular setup.
>
> A full dmesg is attached (dmesg-raspios.txt).
>
>
> Cheers,
> --
> Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
> D-I release manager -- Release team member -- Freelance Consultant
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
2023-04-19 14:23 ` Jim Quinlan
@ 2023-04-19 15:57 ` Cyril Brulebois
-1 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-19 15:57 UTC (permalink / raw)
To: Jim Quinlan
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1: Type: text/plain, Size: 2561 bytes --]
Hi Jim,
It might take a few days before getting back to you regarding the
various questions you asked. To be on the safe side, I'll probably run
a cold boot for each setup a number of times (e.g. 10), so that any
possible outlier can be spotted/rejected. And maybe share results off
list once we have a better understanding of what's going on. Does that
make sense to you?
I'll cover a particular topic right away though.
Jim Quinlan <jim2101024@gmail.com> (2023-04-19):
> Second, you say that you used a different "CM4" from the one used in
> the Bugzilla report -- what do you mean by that? Are you referring
> to the CM4 module proper, whose only change was going from 4GB to 8GB,
> or the IO board being used? My testing is done with a standard RPi
> CM4 and standard RPi IO board. Before this patch series, the only way
> this standard configuration can work for most hobbyist PCI cards (i.e.
> floating CLKREQ# pin) is by using Raspian AND adding
> "brcm,enable-l1ss" to the DT node.
Regarding the IO Board, I'm using the official Compute Module 4 IO
Board: https://www.raspberrypi.com/products/compute-module-4-io-board/
I've been using the very same IO Board for all my testing, and what I'm
changing is the standard RPi CM4 plugged on it.
> I'm guessing that you are using the configuration that you described
> to me in a personal email: "[the] chip is embedded directly on the
> modified PCB, as opposed to plugged into the PCIe slot on the official
> CM4 IO Board". If true, you are testing on a configuration that (a)
> is unique to you and your group and (b) must be doing something with
> the CLKREQ# signal so that your "before" case does not panic. Is this
> the case?
That's definitely not the case.
True, as mentioned in a personal mail, we've seen problems with a custom
PCB, derived from the CM4 IO Board design, but of course there could be
some faulty design at work there… So we've first researched whether the
same problem could be produced with consumer grade products, and once
we've verified that, I opened #217276 on Bugzilla.
Since Florian's testing seems overwhelmingly positive, and since I'm
seeing definitive improvement with at least one CM4, maybe it would make
sense not to block the patch series on the kernel panic I'm seeing with
the other CM4, and track that particular issue via a separate bug?
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device
@ 2023-04-19 15:57 ` Cyril Brulebois
0 siblings, 0 replies; 57+ messages in thread
From: Cyril Brulebois @ 2023-04-19 15:57 UTC (permalink / raw)
To: Jim Quinlan
Cc: Florian Fainelli, linux-pci, Nicolas Saenz Julienne,
Bjorn Helgaas, Lorenzo Pieralisi, Phil Elwell,
bcm-kernel-feedback-list, james.quinlan, Lorenzo Pieralisi,
Krzysztof Wilczyński, Rob Herring,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list
[-- Attachment #1.1: Type: text/plain, Size: 2561 bytes --]
Hi Jim,
It might take a few days before getting back to you regarding the
various questions you asked. To be on the safe side, I'll probably run
a cold boot for each setup a number of times (e.g. 10), so that any
possible outlier can be spotted/rejected. And maybe share results off
list once we have a better understanding of what's going on. Does that
make sense to you?
I'll cover a particular topic right away though.
Jim Quinlan <jim2101024@gmail.com> (2023-04-19):
> Second, you say that you used a different "CM4" from the one used in
> the Bugzilla report -- what do you mean by that? Are you referring
> to the CM4 module proper, whose only change was going from 4GB to 8GB,
> or the IO board being used? My testing is done with a standard RPi
> CM4 and standard RPi IO board. Before this patch series, the only way
> this standard configuration can work for most hobbyist PCI cards (i.e.
> floating CLKREQ# pin) is by using Raspian AND adding
> "brcm,enable-l1ss" to the DT node.
Regarding the IO Board, I'm using the official Compute Module 4 IO
Board: https://www.raspberrypi.com/products/compute-module-4-io-board/
I've been using the very same IO Board for all my testing, and what I'm
changing is the standard RPi CM4 plugged on it.
> I'm guessing that you are using the configuration that you described
> to me in a personal email: "[the] chip is embedded directly on the
> modified PCB, as opposed to plugged into the PCIe slot on the official
> CM4 IO Board". If true, you are testing on a configuration that (a)
> is unique to you and your group and (b) must be doing something with
> the CLKREQ# signal so that your "before" case does not panic. Is this
> the case?
That's definitely not the case.
True, as mentioned in a personal mail, we've seen problems with a custom
PCB, derived from the CM4 IO Board design, but of course there could be
some faulty design at work there… So we've first researched whether the
same problem could be produced with consumer grade products, and once
we've verified that, I opened #217276 on Bugzilla.
Since Florian's testing seems overwhelmingly positive, and since I'm
seeing definitive improvement with at least one CM4, maybe it would make
sense not to block the patch series on the kernel panic I'm seeing with
the other CM4, and track that particular issue via a separate bug?
Cheers,
--
Cyril Brulebois (kibi@debian.org) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
2023-04-12 16:12 ` Florian Fainelli
@ 2023-04-21 19:07 ` Konstantin Ryabitsev
-1 siblings, 0 replies; 57+ messages in thread
From: Konstantin Ryabitsev @ 2023-04-21 19:07 UTC (permalink / raw)
To: Rob Herring, Florian Fainelli
Cc: Jim Quinlan, Krzysztof Kozlowski, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
April 18, 2023 2:35 PM, "Rob Herring" <robh@kernel.org> wrote:
>> Some trees like the networking
>> tree do merge commits of patch sets where the cover letter is used as part
>> of the merge commit message. Other maintainers don't, and some want the
>> change log after the '---' and some do not.
>
> I'm not aware of anyone except for DRM wanting the changelog in the
> final commits, but that's really a different issue.
I don't think anyone wants changelogs in actual final commits, they usually go under "---" in patch submissions.
> I'm pretty sure no one will complain about a changelog in the patches. I
> guess you just have to duplicate it if you think it should be in both.
> b4 could be taught to do that I suppose. IMO, the cover letter should
> have a higher level changelog than the individual patches.
b4 doesn't really need to manage per-patch changelogs -- they should just go under "---" in the commit. When you send the series either via "b4 send" or via git-send-email, the changelogs will be properly included in the message, but they won't make it into the tree after the maintainer runs "git am", because git will drop anything under the first "---" in the commit message.
The cover letter changelog is supposed to be higher level than individual patch changelogs, so I don't think it makes sense for b4 to collect them from individual patches.
-K
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props
@ 2023-04-21 19:07 ` Konstantin Ryabitsev
0 siblings, 0 replies; 57+ messages in thread
From: Konstantin Ryabitsev @ 2023-04-21 19:07 UTC (permalink / raw)
To: Rob Herring, Florian Fainelli
Cc: Jim Quinlan, Krzysztof Kozlowski, linux-pci,
Nicolas Saenz Julienne, Bjorn Helgaas, Lorenzo Pieralisi,
Cyril Brulebois, Phil Elwell, bcm-kernel-feedback-list,
james.quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński,
Krzysztof Kozlowski,
moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE,
moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
April 18, 2023 2:35 PM, "Rob Herring" <robh@kernel.org> wrote:
>> Some trees like the networking
>> tree do merge commits of patch sets where the cover letter is used as part
>> of the merge commit message. Other maintainers don't, and some want the
>> change log after the '---' and some do not.
>
> I'm not aware of anyone except for DRM wanting the changelog in the
> final commits, but that's really a different issue.
I don't think anyone wants changelogs in actual final commits, they usually go under "---" in patch submissions.
> I'm pretty sure no one will complain about a changelog in the patches. I
> guess you just have to duplicate it if you think it should be in both.
> b4 could be taught to do that I suppose. IMO, the cover letter should
> have a higher level changelog than the individual patches.
b4 doesn't really need to manage per-patch changelogs -- they should just go under "---" in the commit. When you send the series either via "b4 send" or via git-send-email, the changelogs will be properly included in the message, but they won't make it into the tree after the maintainer runs "git am", because git will drop anything under the first "---" in the commit message.
The cover letter changelog is supposed to be higher level than individual patch changelogs, so I don't think it makes sense for b4 to collect them from individual patches.
-K
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2023-04-21 19:16 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-11 16:59 [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device Jim Quinlan
2023-04-11 16:59 ` Jim Quinlan
2023-04-11 16:59 ` [PATCH v2 1/3] dt-bindings: PCI: brcmstb: Add two optional props Jim Quinlan
2023-04-11 16:59 ` Jim Quinlan
2023-04-12 8:09 ` Krzysztof Kozlowski
2023-04-12 8:09 ` Krzysztof Kozlowski
2023-04-12 11:49 ` Florian Fainelli
2023-04-12 11:49 ` Florian Fainelli
2023-04-12 11:56 ` Krzysztof Kozlowski
2023-04-12 11:56 ` Krzysztof Kozlowski
2023-04-12 14:14 ` Jim Quinlan
2023-04-12 14:14 ` Jim Quinlan
2023-04-12 15:37 ` Rob Herring
2023-04-12 15:37 ` Rob Herring
2023-04-12 16:12 ` Florian Fainelli
2023-04-12 16:12 ` Florian Fainelli
2023-04-18 18:35 ` Rob Herring
2023-04-18 18:35 ` Rob Herring
2023-04-21 19:07 ` Konstantin Ryabitsev
2023-04-21 19:07 ` Konstantin Ryabitsev
2023-04-14 20:14 ` Bjorn Helgaas
2023-04-14 20:14 ` Bjorn Helgaas
2023-04-11 16:59 ` [PATCH v2 2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device Jim Quinlan
2023-04-11 16:59 ` Jim Quinlan
2023-04-13 14:39 ` Cyril Brulebois
2023-04-13 14:39 ` Cyril Brulebois
2023-04-13 14:57 ` Jim Quinlan
2023-04-13 14:57 ` Jim Quinlan
2023-04-13 20:06 ` Cyril Brulebois
2023-04-14 12:14 ` Jim Quinlan
2023-04-14 12:14 ` Jim Quinlan
2023-04-14 12:27 ` Florian Fainelli
2023-04-14 12:27 ` Florian Fainelli
2023-04-14 13:31 ` Jim Quinlan
2023-04-14 13:31 ` Jim Quinlan
2023-04-14 16:19 ` Cyril Brulebois
2023-04-14 16:19 ` Cyril Brulebois
2023-04-19 14:23 ` Jim Quinlan
2023-04-19 14:23 ` Jim Quinlan
2023-04-19 15:57 ` Cyril Brulebois
2023-04-19 15:57 ` Cyril Brulebois
2023-04-13 14:58 ` Florian Fainelli
2023-04-13 14:58 ` Florian Fainelli
2023-04-14 20:27 ` Bjorn Helgaas
2023-04-14 20:27 ` Bjorn Helgaas
2023-04-14 20:33 ` Florian Fainelli
2023-04-14 20:33 ` Florian Fainelli
2023-04-17 21:41 ` Bjorn Helgaas
2023-04-17 21:41 ` Bjorn Helgaas
2023-04-14 23:14 ` Jim Quinlan
2023-04-14 23:14 ` Jim Quinlan
2023-04-11 16:59 ` [PATCH v2 3/3] PCI: brcmstb: Set PCIe transaction completion timeout Jim Quinlan
2023-04-11 16:59 ` Jim Quinlan
2023-04-12 0:26 ` Cyril Brulebois
2023-04-12 0:26 ` Cyril Brulebois
2023-04-13 18:40 ` [PATCH v2 0/3] PCI: brcmstb: CLKREQ# accomodations of downstream device Florian Fainelli
2023-04-13 18:40 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.