[PATCH 6.7 000/713] 6.7.11-rc1 review

[PATCH 6.7 000/713] 6.7.11-rc1 review

[Sasha Levin]

This is the start of the stable review cycle for the 6.7.11 release.
There are 713 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Mar 26 10:47:13 PM UTC 2024.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-6.7.y&id2=v6.7.10
or in the git tree and branch at:
        git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y
and the diffstat can be found below.

Thanks,
Sasha

-------------
Pseudo-Shortlog of commits:

Aaron Conole (1):
  selftests: openvswitch: Add validation for the recursion test

Abel Vesa (1):
  arm64: dts: qcom: sm8550: Fix SPMI channels size

Abhinav Kumar (1):
  drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN

Adam Butcher (1):
  spi: spi-imx: fix off-by-one in mx51 CPU mode burst length

Adam Guerin (4):
  crypto: qat - remove unused macros in qat_comp_alg.c
  crypto: qat - removed unused macro in adf_cnv_dbgfs.c
  crypto: qat - avoid division by zero
  crypto: qat - remove double initialization of value

Adam Skladowski (1):
  dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible

Ajay Singh (2):
  wifi: wilc1000: do not realloc workqueue everytime an interface is
    added
  wifi: wilc1000: fix multi-vif management when deleting a vif

Al Raj Hassain (1):
  ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI
    quirk table

Al Viro (1):
  erofs: fix handling kern_mount() failure

Alban Boyé (1):
  ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

Alex Bee (1):
  drm/rockchip: inno_hdmi: Fix video timing

Alexander Gordeev (1):
  net/iucv: fix the allocation size of iucv_path_table array

Alexander Stein (2):
  media: tc358743: register v4l2 async device only after successful
    setup
  media: i2c: imx290: Fix IMX920 typo

Alexander Sverdlin (1):
  spi: lpspi: Avoid potential use-after-free in probe()

Alexander Usyskin (1):
  mei: gsc_proxy: match component when GSC is on different bus

Alexandre Ghiti (1):
  riscv: Fix compilation error with FAST_GUP and rv32

Alexey I. Froloff (1):
  ACPI: resource: Do IRQ override on Lunnen Ground laptops

Alexey Kodanev (1):
  RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()

Alexis Lothoré (4):
  wifi: wilc1000: fix declarations ordering
  wifi: wilc1000: fix RCU usage in connect path
  wifi: wilc1000: prevent use-after-free on vif when cleaning up all
    interfaces
  wifi: wilc1000: revert reset line logic flip

Alison Schofield (2):
  cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
  cxl/region: Allow out of order assembly of autodiscovered regions

Allen Ye (1):
  wifi: mt76: connac: add beacon protection support for mt7996

Anastasia Belova (1):
  cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return
    value

Andre Przywara (1):
  firmware: arm_scmi: Fix double free in SMC transport cleanup path

Andre Werner (1):
  net: smsc95xx: add support for SYS TEC USB-SPEmodule1

Andrejs Cainikovs (1):
  arm64: dts: ti: k3-am62-main: disable usb lpm

Andrew Ballance (1):
  gen_compile_commands: fix invalid escape sequence warning

Andrew Davis (1):
  arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level

Andrey Grafin (2):
  libbpf: Apply map_set_def_max_entries() for inner_maps on creation
  selftest/bpf: Add map_in_maps with BPF_MAP_TYPE_PERF_EVENT_ARRAY
    values

Andrey Skvortsov (2):
  Bluetooth: hci_h5: Add ability to allocate memory for private data
  Bluetooth: btrtl: fix out of bounds memory access

Andrii Nakryiko (3):
  libbpf: Fix faccessat() usage on Android
  libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim
    API
  bpf: don't infer PTR_TO_CTX for programs with unnamed context type

Andy Shevchenko (1):
  serial: 8250_exar: Don't remove GPIO device on suspend

AngeloGioacchino Del Regno (1):
  drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

Ard Biesheuvel (3):
  x86/sme: Fix memory encryption setting if enabled by default and not
    overridden
  x86/efistub: Clear decompressor BSS in native EFI entrypoint
  x86/efistub: Don't clear BSS twice in mixed mode

Armin Wolf (1):
  ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

Arnaldo Carvalho de Melo (1):
  perf bpf: Clean up the generated/copied vmlinux.h

Arnaud Pouliquen (2):
  remoteproc: stm32: Fix incorrect type in assignment for va
  remoteproc: stm32: Fix incorrect type assignment returned by
    stm32_rproc_get_loaded_rsc_tablef

Arnd Bergmann (11):
  fs/select: rework stack allocation hack for clang
  cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
  wifi: brcmsmac: avoid function pointer casts
  media: pvrusb2: fix pvr2_stream_callback casts
  crypto: arm/sha - fix function cast warnings
  mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  scsi: csiostor: Avoid function pointer casts
  scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
  soc: fsl: dpio: fix kcalloc() argument order

Artem Savkov (1):
  selftests/bpf: Fix potential premature unload in bpf_testmod

Arthur Grillo (1):
  drm: Fix drm_fixp2int_round() making it add 0.5

Arınç ÜNAL (3):
  net: dsa: mt7530: prevent possible incorrect XTAL frequency selection
  net: dsa: mt7530: fix link-local frames that ingress vlan filtering
    ports
  net: dsa: mt7530: fix handling of all link-local frames

Asad Kamal (1):
  drm/amd/pm: Fix esm reg mask use to get pcie speed

Athaariq Ardhiansyah (1):
  ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops

Attila Tőkés (1):
  ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU

Audra Mitchell (1):
  workqueue.c: Increase workqueue name length

Babu Moger (2):
  x86/resctrl: Remove hard-coded memory bandwidth limit
  x86/resctrl: Read supported bandwidth sources from CPUID

Baochen Qiang (1):
  wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use

Baokun Li (1):
  erofs: fix lockdep false positives on initializing erofs_pseudo_mnt

Bart Van Assche (1):
  fs: Fix rw_hint validation

Bartosz Golaszewski (1):
  Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with
    gpiod_get_optional()

Baruch Siach (1):
  mtd: maps: physmap-core: fix flash size larger than 32-bit

Basavaraj Natikar (2):
  HID: amd_sfh: Update HPD sensor structure elements
  HID: amd_sfh: Avoid disabling the interrupt

Ben Wolsieffer (1):
  watchdog: stm32_iwdg: initialize default timeout

Benjamin Berg (2):
  wifi: iwlwifi: mvm: ensure offloading TID queue exists
  wifi: mac80211: use deflink and fix typo in link ID check

Benjamin Lin (2):
  wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps
  wifi: mt76: mt7996: fix HIF_TXD_V2_1 value

Bert Karwatzki (1):
  iommu: Fix compilation without CONFIG_IOMMU_INTEL

Bhavya Kapoor (4):
  arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for
    wkup_uart0 and mcu_uart0
  arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency
    from mcu_uart0
  arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and
    RTS in wkup_uart0
  arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in
    wkup_uart0

Bitterblue Smith (3):
  wifi: rtw88: 8821cu: Fix firmware upload fail
  wifi: rtw88: 8821c: Fix beacon loss and disconnect
  wifi: rtw88: 8821c: Fix false alarm count

Bjorn Andersson (2):
  pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
  arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc

Breno Leitao (1):
  net: blackhole_dev: fix build warning for ethh set but not used

Bryan O'Donoghue (1):
  clk: Fix clk_core_get NULL dereference

Changbin Du (1):
  modules: wait do_free_init correctly

Chao Yu (19):
  f2fs: compress: fix to guarantee persisting compressed blocks by CP
  f2fs: compress: fix to cover normal cluster write with cp_rwsem
  f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
  f2fs: delete obsolete FI_DROP_CACHE
  f2fs: introduce get_dnode_addr() to clean up codes
  f2fs: update blkaddr in __set_data_blkaddr() for cleanup
  f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode
  f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic
  f2fs: zone: fix to wait completion of last bio in zone correctly
  f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem
  f2fs: fix to avoid potential panic during recovery
  f2fs: fix to create selinux label during whiteout initialization
  f2fs: compress: fix to check zstd compress level correctly in mount
    option
  f2fs: compress: fix to check compress flag w/ .i_sem lock
  f2fs: fix to use correct segment type in f2fs_allocate_data_block()
  f2fs: ro: compress: fix to avoid caching unaligned extent
  f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
  f2fs: fix to truncate meta inode pages forcely
  f2fs: zone: fix to remove pow2 check condition for zoned block device

Charles Keepax (1):
  ASoC: cs42l43: Handle error from devm_pm_runtime_enable

Charlie Jenkins (1):
  riscv: Only check online cpus for emulated accesses

Chen Ni (2):
  sr9800: Add check for usbnet_get_endpoints
  drm/tegra: dsi: Add missing check for of_find_device_by_node

Chen-Yu Tsai (4):
  arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
  pinctrl: mediatek: Drop bogus slew rate register range for MT8186
  pinctrl: mediatek: Drop bogus slew rate register range for MT8192
  clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF

Christian König (1):
  drm/ttm/tests: depend on UML || COMPILE_TEST

Christoph Hellwig (1):
  iomap: clear the per-folio dirty bits on all writeback failures

Christophe JAILLET (17):
  mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the
    .remove function
  drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
  drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling
    path of tegra_dsi_probe()
  drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe()
  drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe()
  drm/tegra: rgb: Fix missing clk_put() in the error handling paths of
    tegra_dc_rgb_probe()
  drm/tegra: output: Fix missing i2c_put_adapter() in the error handling
    paths of tegra_output_probe()
  PCI/P2PDMA: Fix a sleeping issue in a RCU read section
  PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
  clk: hisilicon: hi3519: Release the correct number of gates in
    hi3519_clk_unregister()
  clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
  clk: mediatek: mt8135: Fix an error handling path in
    clk_mt8135_apmixed_probe()
  clk: mediatek: mt7622-apmixedsys: Fix an error handling path in
    clk_mt8135_apmixed_probe()
  perf pmu: Fix a potential memory leak in perf_pmu__lookup()
  net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
  NFS: Fix an off by one in root_nfs_cat()
  thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error
    handling path

Christophe Leroy (1):
  powerpc: Force inlining of arch_vmap_p{u/m}d_supported()

Chun-Yi Lee (1):
  aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

Chunguang Xu (1):
  nvme: fix reconnection fail due to reserved tag allocation

Claudiu Beznea (1):
  clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for
    SD1 mux

Colin Ian King (1):
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

Conor Dooley (1):
  riscv: dts: sifive: add missing #interrupt-cells to pmic

Craig Tatlor (1):
  ARM: dts: qcom: msm8974: correct qfprom node size

Cristian Ciocaltea (2):
  ASoC: amd: acp: Add missing error handling in sof-mach
  ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe()

Damian Muszynski (1):
  crypto: qat - fix ring to service map for dcc in 4xxx

Dan Carpenter (5):
  io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
  ASoC: SOF: Add some bounds checking to firmware data
  bus: mhi: ep: check the correct variable in
    mhi_ep_register_controller()
  staging: greybus: fix get_channel_from_mode() failure path
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug

Daniel Gabay (1):
  wifi: iwlwifi: mvm: use correct address 3 in A-MSDU

Daniel Golle (3):
  clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
  net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is
    up
  net: ethernet: mtk_eth_soc: fix PPE hanging issue

Daniel Lezcano (1):
  powercap: dtpm_cpu: Fix error check against freq_qos_add_request()

Daniel Thompson (3):
  backlight: da9052: Fully initialize backlight_properties during probe
  backlight: lm3639: Fully initialize backlight_properties during probe
  backlight: lp8788: Fully initialize backlight_properties during probe

Daniil Dulov (2):
  media: go7007: add check of return value of go7007_read_addr()
  media: pvrusb2: remove redundant NULL check

Dave Airlie (2):
  nouveau: reset the bo resource bus info after an eviction
  nouveau/gsp: don't check devinit disable on GSP.

Dave Wysochanski (1):
  NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt

David Gow (6):
  kunit: test: Log the correct filter string in executor_test
  lib/cmdline: Fix an invalid format specifier in an assertion msg
  lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
  time: test: Fix incorrect format specifier
  rtc: test: Fix invalid format specifier.
  net: test: Fix printf format specifier in skb_segment kunit test

David Heidelberg (1):
  arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming

David Howells (3):
  cifs: Don't use certain unnecessary folio_*() functions
  cifs: Fix writeback data corruption
  afs: Revert "afs: Hide silly-rename files from userspace"

David McFarland (1):
  ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override

Deren Wu (3):
  wifi: mt76: mt7925: update PCIe DMA settings
  wifi: mt76: mt7921e: fix use-after-free in free_irq()
  wifi: mt76: mt7925e: fix use-after-free in free_irq()

Devarsh Thakkar (2):
  arm64: dts: ti: Add common1 register space for AM65x SoC
  arm64: dts: ti: Add common1 register space for AM62x SoC

Dmitry Baryshkov (9):
  soc: qcom: socinfo: rename PM2250 to PM4125
  arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings
  arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  drm: ci: use clk_ignore_unused for apq8016
  drm/msm/dpu: use devres-managed allocation for MDP TOP
  drm/msm/dpu: use devres-managed allocation for HW blocks
  drm/msm/dpu: finalise global state object

Douglas Anderson (1):
  drm/panel: boe-tv101wum-nl6: make use of prepare_prev_first

Duanqiang Wen (1):
  net: txgbe: fix clk_name exceed MAX_DEV_ID limits

Duoming Zhou (3):
  wifi: brcm80211: handle pmk_op allocation failure
  nfp: flower: handle acti_netdevs allocation failure
  clk: zynq: Prevent null pointer dereference caused by kmalloc failure

Dylan Hung (1):
  i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling

Edward Adam Davis (1):
  media: pvrusb2: fix uaf in pvr2_context_set_notify

Emmanuel Grumbach (3):
  wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
  wifi: iwlwifi: mvm: fix the TLC command after ADD_STA
  wifi: iwlwifi: mvm: don't set the MFP flag for the GTK

Eric Dumazet (7):
  sock_diag: annotate data-races around sock_diag_handlers[family]
  inet_diag: annotate data-races around inet_diag_table[]
  ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down()
  net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
  tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge()
  net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check
  packet: annotate data-races around ignore_outgoing

Ethan Zhao (2):
  PCI: Make pci_dev_is_disconnected() helper public for other drivers
  iommu/vt-d: Don't issue ATS Invalidation request when device is
    disconnected

Eugen Hristev (2):
  arm64: dts: mediatek: mt8192: fix vencoder clock name
  arm64: dts: mediatek: mt8186: fix VENC power domain clocks

Ezra Buehler (1):
  mtd: spinand: esmt: Extend IDs to 5 bytes

Fedor Pchelkin (1):
  drm/tegra: put drm_gem_object ref on error in tegra_fb_create

Fei Shao (1):
  spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

Fei Wu (1):
  perf: RISCV: Fix panic on pmu overflow handler

Felix Fietkau (1):
  wifi: mac80211: only call drv_sta_rc_update for uploaded stations

Felix Maurer (1):
  hsr: Handle failures in module init

Filipe Manana (2):
  btrfs: fix data races when accessing the reserved amount of block
    reserves
  btrfs: fix data race at btrfs_use_block_rsv() when accessing block
    reserve

Frank Li (2):
  arm64: dts: imx8qm: Align edma3 power-domains resources indentation
  arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers

Frederic Weisbecker (2):
  rcu/exp: Fix RCU expedited parallel grace period kworker allocation
    failure recovery
  rcu/exp: Handle RCU expedited grace period kworker allocation failure

Frej Drejhammar (1):
  comedi: comedi_8255: Correct error in subdevice initialization

Frieder Schrempf (7):
  arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S
    i.MX8MM
  arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL
    i.MX8MM
  arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
    on BL OSM-S board
  arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
    on BL board
  arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
    on BL OSM-S board
  arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
    on BL board
  arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM
    module

Frédéric Danis (2):
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: Fix eir name length

Gabor Juhos (3):
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES
    reset

Gabriel Krisman Bertazi (2):
  ovl: Always reject mounting over case-insensitive directories
  io_uring: Fix release of pinned pages when __io_uaddr_map fails

Gavrilov Ilia (6):
  tcp: fix incorrect parameter validation in the do_tcp_getsockopt()
    function
  ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt()
    function
  l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt()
    function
  udp: fix incorrect parameter validation in the udp_lib_getsockopt()
    function
  net: kcm: fix incorrect parameter validation in the kcm_getsockopt)
    function
  net/x25: fix incorrect parameter validation in the x25_getsockopt()
    function

Geert Uytterhoeven (12):
  soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
  ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063
    nodes
  ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate
  arm64: dts: renesas: r8a779g0: Restore sort order
  arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
  ARM: dts: arm: realview: Fix development chip ROM compatible value
  arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
  arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
  pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function
  clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
  clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
  pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm

Gen Xu (1):
  wifi: mt76: mt792x: fix ethtool warning

George Stark (1):
  leds: aw2013: Unlock mutex before destroying it

Gergo Koteles (7):
  ALSA: hda/tas2781: use dev_dbg in system_resume
  ALSA: hda/tas2781: add lock to system_suspend
  ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
  ALSA: hda/tas2781: add ptrs to calibration functions
  ALSA: hda/tas2781: do not call pm_runtime_force_* in
    system_resume/suspend
  ALSA: hda/tas2781: configure the amp after firmware load
  ALSA: hda/tas2781: restore power state after system_resume

Greg Joyce (1):
  block: sed-opal: handle empty atoms when parsing response

Hans de Goede (3):
  platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
  ASoC: rt5645: Make LattePanda board DMI match more precise
  platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name

Hao Zhang (1):
  wifi: mt76: mt7925: fix mcu query command fail

Hari Bathini (1):
  bpf: Fix warning for bpf_cpumask in verifier

Harry Wentland (2):
  drm: Don't treat 0 as -1 in drm_fixp2int_ceil
  drm/vkms: Avoid reading beyond LUT array

Heiko Carstens (1):
  s390/cache: prevent rebuild of shared_cpu_list

Heiko Stuebner (3):
  arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
  arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
  arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s

Helge Deller (1):
  bcachefs: Fix build on parisc by avoiding __multi3()

Hojin Nam (1):
  perf: CXL: fix CPMU filter value mask length

Hongyu Jin (1):
  dm io: Support IO priority

Hou Tao (2):
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

Howard Hsu (1):
  wifi: mt76: mt7996: fix HE beamformer phy cap for station vif

Hsin-Te Yuan (1):
  arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow

Hsin-Yi Wang (2):
  drm/panel-edp: use put_sync in unprepare
  drm/mediatek: Fix a null pointer crash in
    mtk_drm_crtc_finish_page_flip

Hugo Villeneuve (1):
  serial: max310x: fix syntax error in IRQ error message

Ian Abbott (1):
  comedi: comedi_test: Prevent timers rescheduling during deletion

Ian Rogers (5):
  perf pmu: Treat the msr pmu as software
  perf srcline: Add missed addr2line closes
  perf expr: Fix "has_event" function for metric style events
  perf stat: Avoid metric-only segv
  perf metric: Don't remove scale from counts

Ido Schimmel (6):
  selftests: forwarding: Add missing multicast routing config entries
  devlink: Move private netlink flags to C file
  devlink: Acquire device lock during netns dismantle
  devlink: Enable the use of private flags in post_doit operations
  devlink: Allow taking device lock in pre_doit operations
  selftests: forwarding: Fix ping failure due to short timeout

Ignat Korchagin (1):
  net: veth: do not manipulate GRO when using XDP

Igor Prusov (1):
  clk: meson: Add missing clocks to axg_clk_regmaps

Ilan Peer (1):
  wifi: iwlwifi: mvm: Fix the listener MAC filter flags

Ilkka Koskinen (1):
  perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect
    child count)

Ilpo Järvinen (1):
  PCI/DPC: Print all TLP Prefixes, not just the first

Jaegeuk Kim (1):
  f2fs: check number of blocks in a current section

Jai Luthra (1):
  arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS

Jakub Kicinski (1):
  selftests: tls: use exact comparison in recv_partial

James Clark (1):
  coresight: Fix issue where a source device's helpers aren't disabled

Jan Höppner (1):
  s390/dasd: Use dev_*() for device log messages

Jan Kara (2):
  quota: Fix rcu annotations of inode dquot pointers
  quota: Properly annotate i_dquot arrays with __rcu

Jason Gunthorpe (1):
  iommu/arm-smmu-v3: Check that the RID domain is S1 in SVA

Jayesh Choudhary (1):
  arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused
    VP

Jean-Loïc Charroud (1):
  ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS
    UM3402 with missing DSD

Jeff Johnson (1):
  wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrights

Jeff LaBundy (1):
  Input: iqs7222 - add support for IQS7222D v1.1 and v1.2

Jens Axboe (7):
  io_uring/unix: drop usage of io_uring socket
  io_uring: drop any code related to SCM_RIGHTS
  io_uring: remove looping around handling traditional task_work
  io_uring: remove unconditional looping in local task_work handling
  io_uring/net: unify how recvmsg and sendmsg copy in the msghdr
  io_uring/net: move receive multishot out of the generic msghdr path
  io_uring: don't save/restore iowait state

Jeremy Kerr (1):
  net: mctp: copy skb ext data when fragmenting

Jernej Skrabec (4):
  media: cedrus: h265: Fix configuring bitstream size
  media: sun8i-di: Fix coefficient writes
  media: sun8i-di: Fix power on/off sequences
  media: sun8i-di: Fix chroma difference threshold

Jerome Brunet (4):
  ASoC: meson: aiu: fix function pointer type mismatch
  ASoC: meson: t9015: fix function pointer type mismatch
  ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
  ASoC: meson: axg-tdm-interface: add frame rate constraint

Ji Sheng Teoh (1):
  watchdog: starfive: Check pm_runtime_enabled() before decrementing
    usage counter

Jianhua Lu (1):
  backlight: ktz8866: Correct the check for of_property_read_u32

Jiawei Wang (1):
  ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2

Jiaxun Yang (1):
  MIPS: Clear Cause.BD in instruction_pointer_set

Jie Wang (2):
  net: hns3: fix port duplex configure error in IMP reset
  crypto: qat - relocate and rename get_service_enabled()

Jijie Shao (1):
  net: hns3: fix wrong judgment condition issue

Jinjie Ruan (1):
  wifi: mwifiex: debugfs: Drop unnecessary error check for
    debugfs_create_dir()

Jiri Pirko (3):
  dpll: spec: use proper enum for pin capabilities attribute
  dpll: fix dpll_xa_ref_*_del() for multiple registrations
  devlink: fix port new reply cmd type

Jiri Slaby (SUSE) (1):
  tty: vt: fix 20 vs 0x20 typo in EScsiignore

Johan Carlsson (1):
  ALSA: usb-audio: Stop parsing channels bits when all channels are
    found.

Johan Hovold (2):
  soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free
  PCI/AER: Fix rootport attribute paths in ABI docs

Johannes Berg (8):
  wifi: iwlwifi: mvm: report beacon protection failures
  wifi: iwlwifi: dbg-tlv: ensure NUL termination
  wifi: iwlwifi: acpi: fix WPFC reading
  wifi: iwlwifi: mvm: initialize rates in FW earlier
  wifi: iwlwifi: mvm: d3: fix IPN byte order
  wifi: iwlwifi: always have 'uats_enabled'
  wifi: iwlwifi: mvm: fix erroneous queue index mask
  wifi: iwlwifi: mvm: don't set replay counters to 0xff

Johannes Thumshirn (1):
  btrfs: zoned: don't skip block group profile checks on conventional
    zones

John Keeping (1):
  regulator: userspace-consumer: add module device table

John Ogness (6):
  printk: nbcon: Relocate 32bit seq macros
  printk: ringbuffer: Do not skip non-finalized records with
    prb_next_seq()
  printk: Wait for all reserved records with pr_flush()
  printk: Add this_cpu_in_panic()
  printk: ringbuffer: Cleanup reader terminology
  printk: ringbuffer: Skip non-finalized records in panic

Johnny Hsieh (1):
  ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table

Jon Hunter (1):
  memory: tegra: Correct DLA client names

Jonah Palmer (1):
  vdpa/mlx5: Allow CVQ size changes

Jonas Dreßler (3):
  Bluetooth: Remove HCI_POWER_OFF_TIMEOUT
  Bluetooth: mgmt: Remove leftover queuing of power_off work
  Bluetooth: Remove superfluous call to hci_conn_check_pending()

Jonathan Bell (1):
  PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling

Jorge Mora (2):
  NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102
  NFSv4.2: fix listxattr maximum XDR buffer size

Josef Bacik (1):
  nfs: fix panic when nfs4_ff_layout_prepare_ds() fails

Josh Poimboeuf (1):
  objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks

Judith Mendez (1):
  arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC

Juergen Gross (2):
  xen/evtchn: avoid WARN() when unbinding an event channel
  xen/events: increment refcnt only if event channel is refcounted

Julien Massot (2):
  media: cadence: csi2rx: use match fwnode for media link
  media: v4l2: cci: print leading 0 on error

Jérôme Pouiller (1):
  wifi: wfx: fix memory leak when starting AP

Jörg Wedekind (1):
  PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

Kailang Yang (1):
  ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port

Kajol Jain (1):
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value
    checks

Kamal Heib (1):
  net: ena: Remove ena_select_queue

Kan Liang (1):
  perf top: Uniform the event name for the hybrid machine

Kang Yang (1):
  wifi: ath12k: fix incorrect logic of calculating vdev_stats_id

Kees Cook (3):
  pstore: inode: Convert mutex usage to guard(mutex)
  pstore: inode: Only d_invalidate() is needed
  x86, relocs: Ignore relocations in .notes section

Keisuke Nishimura (2):
  sched/fair: Take the scheduling domain into account in
    select_idle_smt()
  sched/fair: Take the scheduling domain into account in
    select_idle_core()

Kent Overstreet (3):
  bcachefs: check for failure to downgrade
  bcachefs: fix simulateously upgrading & downgrading
  bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree

Konrad Dybcio (12):
  arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain
  arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency
  arm64: dts: qcom: sc8180x: Add missing CPU off state
  arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains
  arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX
  arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is
    on
  arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size
  arm64: dts: qcom: sm8450: Add missing interconnects to serial
  arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI
  clk: qcom: reset: Commonize the de/assert functions
  clk: qcom: reset: Ensure write completion on reset de/assertion
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

Konstantin Taranov (1):
  RDMA/mana_ib: Fix bug in creation of dma regions

Krzysztof Kozlowski (3):
  arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
  arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
  arm64: dts: qcom: sm8150: correct PCIe wake-gpios

Kuniyuki Iwashima (3):
  af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().
  rds: tcp: Fix use-after-free of net in reqsk_timer_handler().
  tcp: Fix refcnt handling in __inet_hash_connect().

Kunwu Chan (1):
  x86/xen: Add some null pointer checking to smp.c

Kévin L'hôpital (1):
  net: phy: fix phy_get_internal_delay accessing an empty array

Lad Prabhakar (2):
  arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
  ASoC: sh: rz-ssi: Fix error message print

Lang Yu (1):
  drm/amdgpu: fix mmhub client id out-of-bounds access

Le Ma (1):
  drm/amdgpu: drop setting buffer funcs in sdma442

Leon Romanovsky (2):
  RDMA/mlx5: Fix fortify source warning while accessing Eth segment
  xfrm: Allow UDP encapsulation only in offload modes

Li Nan (3):
  md: fix kmemleak of rdev->serial
  block: fix deadlock between bd_link_disk_holder and partition scan
  md: Don't clear MD_CLOSING when the raid is about to stop

Linu Cherian (1):
  octeontx2-af: Use matching wake_up API variant in CGX command
    interface

Liu Ying (1):
  arm64: dts: imx8mp-evk: Fix hdmi@3d node

Luca Ceresoli (1):
  ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates

Luca Weiss (2):
  backlight: lm3630a: Initialize backlight_properties on init
  backlight: lm3630a: Don't set bl->props.brightness in get_brightness

Lucas Stach (1):
  media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak

Luiz Augusto von Dentz (8):
  Bluetooth: Remove BT_HS
  Bluetooth: hci_event: Fix not indicating new connection for BIG Sync
  Bluetooth: hci_core: Cancel request on command timeout
  Bluetooth: hci_sync: Fix overwriting request callback
  Bluetooth: hci_core: Fix possible buffer overflow
  Bluetooth: msft: Fix memory leak
  Bluetooth: btusb: Fix memory leak
  Bluetooth: af_bluetooth: Fix deadlock

Luoyouming (1):
  RDMA/hns: Fix mis-modifying default congestion control algorithm

Maciej Strozek (2):
  mfd: cs42l43: Fix wrong register defaults
  mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults

Mads Bligaard Nielsen (1):
  drm/bridge: adv7511: fix crash on irq during probe

Manorit Chawdhry (2):
  arm64: dts: ti: k3-j721s2: Fix power domain for VTM node
  arm64: dts: ti: k3-j784s4: Fix power domain for VTM node

Manu Bretelle (1):
  selftests/bpf: Disable IPv6 for lwt_redirect test

Manuel Fombuena (1):
  HID: multitouch: Add required quirk for Synaptics 0xcddc device

Mao Jinlong (1):
  coresight: etm4x: Set skip_power_up in etm4_init_arch_data function

Marek Vasut (1):
  arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M
    Plus eDM SBC

Marijn Suijten (1):
  drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled

Mario Limonciello (2):
  iommu/amd: Mark interrupt as managed
  crypto: ccp - Avoid discarding errors in
    psp_send_platform_access_msg()

Mark Brown (2):
  regmap: kunit: Ensure that changed bytes are actually different
  arm64/sve: Lower the maximum allocation for the SVE ptrace regset

Mark Rutland (1):
  perf print-events: make is_event_supported() more robust

Markus Schneider-Pargmann (1):
  can: m_can: Start/Cancel polling timer together with interrupts

Martin KaFai Lau (2):
  selftests/bpf: Fix the flaky tc_redirect_dtime test
  selftests/bpf: Wait for the netstamp_needed_key static key to be
    turned on

Martin Kaiser (1):
  gpio: vf610: allow disabling the vf610 driver

Martin Kaistra (1):
  wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work

Martin Krastev (1):
  drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs

Masahiro Yamada (1):
  kconfig: fix infinite loop when expanding a macro at the end of file

Mathias Krause (1):
  bcachefs: install fd later to avoid race with close

Matthew Auld (1):
  drm/buddy: check range allocation matches alignment

Matthew Wilcox (Oracle) (1):
  smb: do not test the return value of folio_start_writeback()

Matti Vaittinen (1):
  iio: gts-helper: Fix division loop

Max Kellermann (1):
  parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check

Maxim Kudinov (1):
  ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override

Maxime Ripard (1):
  drm/tests: helpers: Include missing drm_drv header

Mete Durlu (1):
  s390/vtime: fix average steal time calculation

Michael Ellerman (2):
  powerpc/32: fix ADB_CUDA kconfig warning
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send()
    etc.

Michael Roth (1):
  x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type

Michal Vokáč (2):
  ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
  ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch
    node

Mika Westerberg (1):
  spi: intel-pci: Add support for Lunar Lake-M SPI serial flash

Mike Yu (2):
  xfrm: fix xfrm child route lookup for packet offload
  xfrm: set skb control buffer based on packet offload as well

Mikhail Khvainitski (1):
  HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

Mikulas Patocka (4):
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm: call the resume method on internal suspend
  dm-integrity: fix a memory leak when rechecking the data
  dm-integrity: align the outgoing bio in integrity_recheck

Ming Lei (1):
  dm raid: fix false positive for requeue needed during reshape

Ming Yen Hsieh (8):
  wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band
  wifi: mt76: mt7925: fix wmm queue mapping
  wifi: mt76: mt7925: fix WoW failed in encrypted mode
  wifi: mt76: mt7925: fix the wrong header translation config
  wifi: mt76: mt7925: add support to set ifs time by mcu command
  wifi: mt76: mt7921: fix incorrect type conversion for CLC command
  wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz
    channel config from ACPI
  wifi: mt76: fix the issue of missing txpwr settings from ch153 to
    ch177

Miri Korenblit (5):
  wifi: iwlwifi: change link id in time event to s8
  wifi: iwlwifi: fix EWRD table validity check
  wifi: iwlwifi: read BIOS PNVM only for non-Intel SKU
  wifi: iwlwifi: support EHT for WH
  wifi: iwlwifi: properly check if link is active

Miroslav Franc (1):
  s390/dasd: fix double module refcount decrement

Muhammad Usama Anjum (1):
  io_uring/net: correct the type of variable

Mustafa Ismail (1):
  RDMA/irdma: Remove duplicate assignment

Naresh Solanki (1):
  regulator: max5970: Fix regulator child node name

Nathan Chancellor (1):
  s390/vdso: drop '-fPIC' from LDFLAGS

Navid Emamdoost (1):
  nbd: null check for nla_nest_start

Nicholas Piggin (1):
  powerpc/ps3: Fix lv1 hcall assembly for ELFv2 calling convention

Nikita Kiryushin (1):
  net: phy: fix phy_read_poll_timeout argument type in genphy_loopback

Nikita Zhandarovich (5):
  do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
  media: em28xx: annotate unchecked call to media_device_register()
  drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()
  drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()
  wireguard: receive: annotate data-race around
    receiving_counter.counter

Nícolas F. R. A. Prado (6):
  cpufreq: mediatek-hw: Wait for CPU supplies before probing
  cpufreq: mediatek-hw: Don't error out if supply is not found
  arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs
  arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection
    node
  arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power
    domains
  arm64: dts: mediatek: mt8186: Add missing xhci clock to usb
    controllers

Oleksandr Natalenko (1):
  HID: logitech-hidpp: Do not flood kernel log

Oleksij Rempel (1):
  net: dsa: microchip: make sure drive strength configuration is not
    lost by soft reset

Olga Kornievskaia (1):
  NFSv4.1/pnfs: fix NFS with TLS in pnfs

Ondrej Jirman (1):
  leds: sgm3140: Add missing timer cleanup and flash gpio control

Pablo Neira Ayuso (2):
  netfilter: nft_set_pipapo: release elements in clone only from destroy
    path
  netfilter: nf_tables: do not compare internal table flags on updates

Paloma Arellano (1):
  drm/msm/dpu: add division of drm_display_mode's hskew parameter

Pauli Virtanen (1):
  Bluetooth: fix use-after-free in accessing skb after sending it

Pavel Begunkov (1):
  io_uring: fix poll_remove stalled req completion

Peng Fan (1):
  thermal/drivers/qoriq: Fix getting tmu range

Perry Yuan (1):
  ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors

Peter Chiu (2):
  wifi: mt76: mt7996: check txs format before getting skb by pid
  wifi: mt76: mt7996: fix TWT issues

Peter Griffin (2):
  mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a
    ref
  mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle()
    takes a ref

Peter Hilber (3):
  timekeeping: Fix cross-timestamp interpolation on counter wrap
  timekeeping: Fix cross-timestamp interpolation corner case decision
  timekeeping: Fix cross-timestamp interpolation for non-x86

Peter Robinson (2):
  bus: tegra-aconnect: Update dependency to ARCH_TEGRA
  dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA

Peter Ujfalusi (1):
  ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend

Petr Machata (1):
  selftests: forwarding: Add missing config entries

Petr Mladek (1):
  printk: Disable passing console lock owner completely during panic()

Petre Rodan (1):
  iio: pressure: mprls0025pa fix off-by-one enum

Prike Liang (1):
  drm/amdgpu: Enable gpu reset for S3 abort cases on Raven series

Przemek Kitszel (1):
  ice: fix stats being updated by way too large values

Puranjay Mohan (1):
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()

Qiheng Lin (1):
  powerpc/pseries: Fix potential memleak in papr_get_attr()

Quan Tian (1):
  netfilter: nf_tables: Fix a memory leak in nf_tables_updchain

Quan Zhou (1):
  wifi: mt76: mt7925: add flow to avoid chip bt function fail

Quanyang Wang (1):
  crypto: xilinx - call finalize with bh disabled

Quentin Schulz (2):
  drm/rockchip: lvds: do not overwrite error code
  drm/rockchip: lvds: do not print scary message when probing defer

Rafael J. Wysocki (1):
  ACPI: scan: Fix device check notification handling

Rafał Miłecki (9):
  arm64: dts: mediatek: mt7986: fix reference to PWM in fan node
  arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock
    name
  arm64: dts: mediatek: mt7986: fix SPI bus width properties
  arm64: dts: mediatek: mt7986: fix SPI nodename
  arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM
  arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg
  arm64: dts: mediatek: mt7622: add missing "device_type" to memory
    nodes
  arm64: dts: marvell: reorder crypto interrupts on Armada SoCs
  arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells

Rahul Rameshbabu (4):
  wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
  wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
  wifi: b43: Stop correct queue in DMA worker when QoS is disabled
  wifi: b43: Disable QoS for bcm4331

Raj Kumar Bhagat (1):
  wifi: ath12k: fix fetching MCBC flag for QCN9274

Randy Dunlap (3):
  drivers/ps3: select VIDEO to provide cmdline functions
  crypto: jitter - fix CRYPTO_JITTERENTROPY help text
  rtc: mt6397: select IRQ_DOMAIN instead of depending on it

Ranjan Kumar (1):
  scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

Ravi Gunasekaran (1):
  arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node

Rob Clark (1):
  drm/msm/a7xx: Fix LLC typo

Rob Herring (4):
  arm: dts: Fix dtc interrupt_provider warnings
  arm64: dts: Fix dtc interrupt_provider warnings
  arm: dts: Fix dtc interrupt_map warnings
  arm64: dts: qcom: Fix interrupt-map cell sizes

Roger Quadros (1):
  arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay

Sakari Ailus (1):
  media: ivsc: csi: Swap SINK and SOURCE pads

Sam Protsenko (1):
  clk: samsung: exynos850: Propagate SPI IPCLK rate change

Sam Ravnborg (1):
  sparc32: Fix section mismatch in leon_pci_grpci

Sami Tolvanen (1):
  riscv: Fix syscall wrapper for >word-size arguments

Sandipan Das (1):
  perf/x86/amd/core: Avoid register reset when CPU is dead

Sasha Levin (1):
  Linux 6.7.11-rc1

Saurabh Sengar (2):
  x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
  x86/hyperv: Use per cpu initial stack for vtl context

Sean Anderson (1):
  usb: phy: generic: Get the vbus supply

Sebastian Reichel (1):
  arm64: dts: rockchip: mark system power controller on rk3588-evb1

Shay Drory (1):
  devlink: Fix devlink parallel commands processing

Sheng Yong (1):
  f2fs: compress: fix to check unreleased compressed cluster

Shengjiu Wang (1):
  clk: imx: imx8mp: Fix SAI_MCLK_SEL definition

Shifeng Li (1):
  RDMA/device: Fix a race between mad_client and cm_client init

Shigeru Yoshida (1):
  hsr: Fix uninit-value access in hsr_get_node()

Shiming Cheng (1):
  ipv6: fib6_rules: flush route cache when rule is changed

Shung-Hsi Yu (1):
  selftests/bpf: trace_helpers.c: do not use poisoned type

Sibi Sankar (1):
  cpufreq: Fix per-policy boost behavior on SoCs using
    cpufreq_boost_set_sw()

Srinivasan Shanmugam (5):
  drm/amd/display: Fix a potential buffer overflow in
    'dp_dsc_clock_en_read()'
  drm/amd/display: Fix potential NULL pointer dereferences in
    'dcn10_set_output_transfer_func()'
  drm/amdgpu: Fix potential out-of-bounds access in
    'amdgpu_discovery_reg_base_init()'
  drm/amd/display: Add 'replay' NULL check in
    'edp_set_replay_allow_active()'
  drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of
    atom_get_src_int()

Sriram R (1):
  wifi: ath12k: Fix issues in channel list update

StanleyYP Wang (1):
  wifi: mt76: mt7996: fix efuse reading issue

Stefan Binding (3):
  ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops
  ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA
  ALSA: hda: cs35l41: Set Channel Index correctly when system is missing
    _DSD

Stephen Boyd (2):
  gpiolib: Pass consumer device through to core in
    devm_fwnode_gpiod_get_index()
  arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang

Steve Sistare (1):
  vdpa_sim: reset must not run

Stuart Henderson (3):
  ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
  ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
  ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

Subbaraya Sundeep (5):
  octeontx2: Detect the mbox up or down message via register
  octeontx2-pf: Wait till detach_resources msg is complete
  octeontx2-pf: Use default max_active works instead of one
  octeontx2-pf: Send UP messages to VF only when VF is up.
  octeontx2-af: Use separate handlers for interrupts

Swapnil Patel (1):
  drm/amd/display: fix input states translation error for dcn35 & dcn351

Takashi Iwai (1):
  ALSA: seq: fix function cast warnings

Takashi Sakamoto (1):
  firewire: core: use long bus reset on gap count error

Tejun Heo (9):
  workqueue: Move pwq->max_active to wq->max_active
  workqueue: Factor out pwq_is_empty()
  workqueue: Replace pwq_activate_inactive_work() with
    [__]pwq_activate_work()
  workqueue: Move nr_active handling into helpers
  workqueue: Make wq_adjust_max_active() round-robin pwqs while
    activating
  workqueue: RCU protect wq->dfl_pwq and implement accessors for it
  workqueue: Introduce struct wq_node_nr_active
  workqueue: Implement system-wide nr_active enforcement for unbound
    workqueues
  workqueue: Don't call cpumask_test_cpu() with -1 CPU in
    wq_update_node_max_active()

Thierry Reding (1):
  arm64: tegra: Set the correct PHY mode for MGBE

Thinh Tran (1):
  net/bnx2x: Prevent access to a freed page in page_pool

Thomas Richter (1):
  s390/pai: fix attr_event_free upper limit for pai device drivers

Thomas Weißschuh (1):
  power: supply: mm8013: fix "not charging" detection

Thomas Zimmermann (1):
  arch/powerpc: Remove <linux/fb.h> from backlight code

Théo Lebrun (3):
  spi: cadence-qspi: put runtime in runtime PM hooks names
  spi: cadence-qspi: add system-wide suspend and resume callbacks
  gpio: nomadik: fix offset bug in nmk_pmx_set()

Tiezhu Yang (1):
  bpftool: Silence build warning about calloc()

Tim Harvey (1):
  arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS

Tim Pambor (1):
  net: phy: dp83822: Fix RGMII TX delay configuration

Tobias Brunner (1):
  ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels

Toke Høiland-Jørgensen (5):
  wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is
    complete
  libbpf: Use OPTS_SET() macro in bpf_xdp_query()
  bpf: Fix DEVMAP_HASH overflow check on 32-bit arches
  bpf: Fix hashtab overflow check on 32-bit arches
  bpf: Fix stackmap overflow check on 32-bit arches

Tomi Valkeinen (3):
  media: rkisp1: Fix IRQ handling due to shared interrupts
  drm/tidss: Fix initial plane zpos values
  drm/tidss: Fix sync-lost issue with two displays

Tony Luck (1):
  x86/resctrl: Implement new mba_MBps throttling heuristic

Tudor Ambarus (1):
  tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

Unnathi Chalicheemala (1):
  soc: qcom: llcc: Check return value on Broadcast_OR reg read

Uwe Kleine-König (5):
  ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
  Input: gpio_keys_polled - suppress deferred probe error for gpio
  pwm: atmel-hlcdc: Fix clock imbalance related to suspend support
  pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan
  ASoC: tlv320adc3xxx: Don't strip remove function when driver is
    builtin

Vaishnav Achath (1):
  arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS
    nodes

Viktor Malik (2):
  tools/resolve_btfids: Refactor set sorting with types from btf_ids.h
  tools/resolve_btfids: Fix cross-compilation to non-host endianness

Vinicius Costa Gomes (2):
  igc: Fix missing time sync events
  igb: Fix missing time sync events

Viresh Kumar (1):
  OPP: debugfs: Fix warning around icc_get_name()

Wang Jianjian (1):
  quota: Fix potential NULL pointer dereference

Wen Gong (1):
  wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before
    WMI_PEER_ASSOC_CMDID

Wenjie Qi (1):
  f2fs: fix NULL pointer dereference in f2fs_submit_page_write()

William Kucharski (1):
  RDMA/srpt: Do not register event handler until srpt device is fully
    setup

William Tu (2):
  devlink: Fix length of eswitch inline-mode
  vmxnet3: Fix missing reserved tailroom

Xingyuan Mo (1):
  wifi: ath10k: fix NULL pointer dereference in
    ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

Xiubo Li (3):
  ceph: always queue a writeback when revoking the Fb caps
  ceph: add ceph_cap_unlink_work to fire check_caps() immediately
  ceph: stop copying to iter at EOF on sync reads

Xiuhong Wang (2):
  f2fs: compress: relocate some judgments in
    f2fs_reserve_compress_blocks
  f2fs: compress: fix reserve_cblocks counting error when out of space

Xuan Zhuo (1):
  virtio: packed: fix unmap leak for indirect desc table

Yan Zhai (3):
  rcu: add a helper to report consolidated flavor QS
  net: report RCU QS on threaded NAPI repolling
  bpf: report RCU QS in cpumap kthread

Yang Jihong (5):
  perf record: Fix possible incorrect free in record__switch_output()
  perf record: Check conflict between '--timestamp-filename' option and
    pipe mode before recording
  perf evsel: Fix duplicate initialization of data->id in
    evsel__parse_sample()
  perf thread_map: Free strlist on normal path in
    thread_map__new_by_tid_str()
  hwtracing: hisi_ptt: Move type check to the beginning of
    hisi_ptt_pmu_event_init()

Yang Yingliang (1):
  NTB: fix possible name leak in ntb_register_device()

Yewon Choi (1):
  rds: introduce acquire/release ordering in acquire/release_in_xmit()

Yifan Zhang (1):
  drm/amdgpu: add MMHUB 3.3.1 support

Yihang Li (1):
  scsi: hisi_sas: Fix a deadlock issue related to automatic dump

Yishai Hadas (1):
  RDMA/mlx5: Relax DEVX access upon modify commands

Yonghong Song (1):
  bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly

Yonglong Liu (1):
  net: hns3: fix kernel crash when 1588 is received on HIP08 devices

Yu Kuai (5):
  md: remove flag RemoveSynchronized
  md/raid1: remove rcu protection to access rdev from conf
  md/raid1: factor out helpers to add rdev to conf
  md/raid1: record nonrot rdevs while adding/removing rdevs to conf
  md/raid1: fix choose next idle in read_balance()

Yuxuan Hu (1):
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

Zhang Shurong (1):
  drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe

Zhipeng Lu (10):
  wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
  SUNRPC: fix a memleak in gss_import_v2_context
  SUNRPC: fix some memleaks in gssx_dec_option_array
  drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node
  drm/lima: fix a memleak in lima_heap_alloc
  media: v4l2-tpg: fix some memleaks in tpg_alloc
  media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
  media: edia: dvbdev: fix a use-after-free
  media: go7007: fix a memleak in go7007_load_encoder
  media: ttpci: fix two memleaks in budget_av_attach

rong.yan (1):
  wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band

 .../testing/sysfs-bus-pci-devices-aer_stats   |    6 +-
 .../bindings/display/msm/qcom,mdss.yaml       |    1 +
 Documentation/netlink/specs/devlink.yaml      |    2 +-
 Documentation/netlink/specs/dpll.yaml         |    1 +
 Makefile                                      |    4 +-
 arch/arm/boot/dts/amazon/alpine.dtsi          |    1 -
 arch/arm/boot/dts/arm/arm-realview-pb1176.dts |    2 +-
 arch/arm/boot/dts/aspeed/aspeed-g4.dtsi       |   14 -
 arch/arm/boot/dts/aspeed/aspeed-g5.dtsi       |   15 +-
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi       |   18 +-
 arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi    |    3 +
 arch/arm/boot/dts/broadcom/bcm-hr2.dtsi       |    1 +
 arch/arm/boot/dts/broadcom/bcm-nsp.dtsi       |    2 +
 .../intel/ixp/intel-ixp42x-gateway-7001.dts   |    2 +
 .../ixp/intel-ixp42x-goramo-multilink.dts     |    2 +
 arch/arm/boot/dts/marvell/kirkwood-l-50.dts   |    2 +
 .../arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi |    2 +
 .../boot/dts/nvidia/tegra30-apalis-v1.1.dtsi  |    1 -
 arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi  |    1 -
 arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi |    1 -
 .../boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi |   25 +-
 arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts    |    3 -
 arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi   |    2 +-
 arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi |    1 -
 .../arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi |    1 -
 arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi  |    1 -
 .../dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi    |    1 +
 .../nxp/imx/imx6qdl-phytec-phycore-som.dtsi   |    1 +
 .../arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts |    1 +
 .../boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts   |    1 +
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi      |    2 +-
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi        |    8 +-
 arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts |   12 +
 arch/arm/boot/dts/renesas/r8a73a4.dtsi        |    9 +-
 arch/arm/boot/dts/renesas/r8a7790-lager.dts   |    1 +
 arch/arm/boot/dts/renesas/r8a7790-stout.dts   |    1 +
 arch/arm/boot/dts/renesas/r8a7791-koelsch.dts |    1 +
 arch/arm/boot/dts/renesas/r8a7791-porter.dts  |    1 +
 arch/arm/boot/dts/renesas/r8a7792-blanche.dts |    1 +
 arch/arm/boot/dts/renesas/r8a7793-gose.dts    |    1 +
 arch/arm/boot/dts/renesas/r8a7794-alt.dts     |    1 +
 arch/arm/boot/dts/renesas/r8a7794-silk.dts    |    1 +
 arch/arm/boot/dts/rockchip/rv1108.dtsi        |    8 -
 arch/arm/boot/dts/st/stm32429i-eval.dts       |    1 -
 arch/arm/boot/dts/st/stm32mp157c-dk2.dts      |    1 -
 .../boot/dts/ti/omap/am5729-beagleboneai.dts  |    1 -
 arch/arm/crypto/sha256_glue.c                 |   13 +-
 arch/arm/crypto/sha512-glue.c                 |   12 +-
 arch/arm64/Kconfig                            |    2 +-
 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |    2 +
 .../boot/dts/allwinner/sun50i-h6-tanix.dtsi   |    2 +
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |    7 +-
 arch/arm64/boot/dts/amazon/alpine-v2.dtsi     |    1 -
 arch/arm64/boot/dts/amazon/alpine-v3.dtsi     |    1 -
 .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     |    3 -
 .../boot/dts/broadcom/northstar2/ns2.dtsi     |    1 +
 .../boot/dts/broadcom/stingray/stingray.dtsi  |    1 +
 .../dts/freescale/imx8mm-kontron-bl-osm-s.dts |   38 +-
 .../boot/dts/freescale/imx8mm-kontron-bl.dts  |   38 +-
 .../dts/freescale/imx8mm-kontron-osm-s.dtsi   |    6 +-
 .../boot/dts/freescale/imx8mm-kontron-sl.dtsi |    4 +-
 .../dts/freescale/imx8mm-venice-gw71xx.dtsi   |   29 +-
 .../freescale/imx8mp-data-modul-edm-sbc.dts   |    2 +-
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts  |   33 +-
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |   29 +-
 arch/arm64/boot/dts/lg/lg1312.dtsi            |    1 -
 arch/arm64/boot/dts/lg/lg1313.dtsi            |    1 -
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |   10 +-
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi |    1 -
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |   10 +-
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |    1 +
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts  |    1 +
 .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts  |    2 +-
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts  |    7 +-
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     |    3 +-
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts  |    7 +-
 .../dts/mediatek/mt8183-kukui-kakadu.dtsi     |    4 +
 .../dts/mediatek/mt8183-kukui-kodama.dtsi     |    4 +
 .../boot/dts/mediatek/mt8183-kukui-krane.dtsi |    4 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |    4 -
 arch/arm64/boot/dts/mediatek/mt8186.dtsi      |   18 +-
 .../boot/dts/mediatek/mt8192-asurada.dtsi     |    4 -
 arch/arm64/boot/dts/mediatek/mt8192.dtsi      |    2 +-
 .../dts/mediatek/mt8195-cherry-tomato-r1.dts  |    4 +
 .../dts/mediatek/mt8195-cherry-tomato-r2.dts  |    4 +
 .../dts/mediatek/mt8195-cherry-tomato-r3.dts  |    4 +
 arch/arm64/boot/dts/mediatek/mt8195-demo.dts  |    1 +
 .../nvidia/tegra234-p3737-0000+p3701-0000.dts |    2 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |    8 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi         |   16 +-
 arch/arm64/boot/dts/qcom/msm8998.dtsi         |   42 +-
 arch/arm64/boot/dts/qcom/qcm2290.dtsi         |    7 +
 arch/arm64/boot/dts/qcom/sa8540p.dtsi         |    3 +
 arch/arm64/boot/dts/qcom/sc8180x.dtsi         |   26 +-
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts    |    2 +-
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  |    8 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |    4 +-
 arch/arm64/boot/dts/qcom/sm6115.dtsi          |    7 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |    6 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |   12 +
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |    2 +-
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     |    4 +-
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi     |   88 +-
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi   |   12 +-
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    |   22 +-
 arch/arm64/boot/dts/renesas/r9a07g054.dtsi    |   22 +-
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi      |    4 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      |    3 +-
 .../boot/dts/rockchip/rk3588-evb1-v10.dts     |    1 +
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi     |    2 -
 arch/arm64/boot/dts/ti/Makefile               |    1 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |    9 +-
 arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi      |    2 +
 arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi   |    1 +
 arch/arm64/boot/dts/ti/k3-am62p.dtsi          |    2 +-
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       |    4 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |   11 +-
 .../boot/dts/ti/k3-am64-phycore-som.dtsi      |    1 +
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       |    6 +-
 .../dts/ti/k3-am642-phyboard-electra-rdk.dts  |    1 +
 arch/arm64/boot/dts/ti/k3-am642-sk.dts        |    4 +-
 .../dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts    |    1 -
 .../arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi |    1 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |    5 +-
 arch/arm64/boot/dts/ti/k3-am69-sk.dts         |    8 +-
 .../dts/ti/k3-j7200-common-proc-board.dts     |   18 +-
 .../dts/ti/k3-j721s2-common-proc-board.dts    |    2 -
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |    2 +-
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      |    2 -
 .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     |    2 +-
 arch/arm64/include/asm/fpsimd.h               |   12 +-
 arch/arm64/kernel/ptrace.c                    |    3 +-
 arch/mips/include/asm/ptrace.h                |    1 +
 arch/parisc/kernel/ftrace.c                   |    2 +-
 arch/powerpc/include/asm/backlight.h          |    5 +-
 arch/powerpc/include/asm/ppc_asm.h            |    6 +-
 arch/powerpc/include/asm/vmalloc.h            |    4 +-
 arch/powerpc/perf/hv-gpci.c                   |   29 +-
 .../platforms/embedded6xx/linkstation.c       |    3 -
 arch/powerpc/platforms/embedded6xx/mpc10x.h   |    3 +
 arch/powerpc/platforms/powermac/Kconfig       |    2 +-
 arch/powerpc/platforms/powermac/backlight.c   |   26 -
 arch/powerpc/platforms/ps3/Kconfig            |    1 +
 arch/powerpc/platforms/ps3/hvcall.S           |   18 +-
 .../pseries/papr_platform_attributes.c        |    8 +-
 .../boot/dts/sifive/hifive-unmatched-a00.dts  |    1 +
 arch/riscv/include/asm/pgtable.h              |    2 +
 arch/riscv/include/asm/syscall_wrapper.h      |   53 +-
 arch/riscv/kernel/traps_misaligned.c          |    2 +-
 arch/s390/kernel/cache.c                      |    1 +
 arch/s390/kernel/perf_pai_crypto.c            |    2 +-
 arch/s390/kernel/perf_pai_ext.c               |    2 +-
 arch/s390/kernel/vdso32/Makefile              |    2 +-
 arch/s390/kernel/vdso64/Makefile              |    2 +-
 arch/s390/kernel/vtime.c                      |    4 +-
 arch/sparc/kernel/leon_pci_grpci1.c           |    2 +-
 arch/sparc/kernel/leon_pci_grpci2.c           |    2 +-
 arch/x86/events/amd/core.c                    |    1 -
 arch/x86/hyperv/hv_vtl.c                      |   26 +-
 arch/x86/include/asm/page.h                   |    6 +-
 arch/x86/include/asm/vsyscall.h               |   10 +
 arch/x86/kernel/acpi/cppc.c                   |    2 +-
 arch/x86/kernel/cpu/resctrl/core.c            |   10 +-
 arch/x86/kernel/cpu/resctrl/internal.h        |    8 +-
 arch/x86/kernel/cpu/resctrl/monitor.c         |   48 +-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c        |   14 +-
 arch/x86/mm/fault.c                           |    9 -
 arch/x86/mm/maccess.c                         |   10 +
 arch/x86/mm/mem_encrypt_identity.c            |   10 +-
 arch/x86/tools/relocs.c                       |    8 +
 arch/x86/xen/smp.c                            |   12 +
 block/holder.c                                |   12 +-
 block/opal_proto.h                            |    1 +
 block/sed-opal.c                              |    6 +-
 crypto/Kconfig                                |    5 +-
 drivers/acpi/processor_idle.c                 |    2 +
 drivers/acpi/resource.c                       |   33 +
 drivers/acpi/scan.c                           |    8 +-
 drivers/base/regmap/regmap-kunit.c            |   54 +-
 drivers/block/aoe/aoecmd.c                    |   12 +-
 drivers/block/aoe/aoenet.c                    |    1 +
 drivers/block/nbd.c                           |    6 +
 drivers/bluetooth/btmtk.c                     |    4 +-
 drivers/bluetooth/btusb.c                     |   10 +-
 drivers/bluetooth/hci_h5.c                    |    5 +-
 drivers/bluetooth/hci_qca.c                   |    6 +-
 drivers/bluetooth/hci_serdev.c                |    9 +-
 drivers/bluetooth/hci_uart.h                  |   12 +-
 drivers/bus/Kconfig                           |    5 +-
 drivers/bus/mhi/ep/main.c                     |    2 +-
 drivers/char/xilinx_hwicap/xilinx_hwicap.c    |    4 +-
 drivers/clk/clk.c                             |    3 +
 drivers/clk/hisilicon/clk-hi3519.c            |    2 +-
 drivers/clk/hisilicon/clk-hi3559a.c           |    1 -
 drivers/clk/imx/clk-imx8mp-audiomix.c         |   11 +-
 drivers/clk/mediatek/clk-mt7622-apmixedsys.c  |    1 -
 drivers/clk/mediatek/clk-mt7981-topckgen.c    |    5 +-
 drivers/clk/mediatek/clk-mt8135-apmixedsys.c  |    4 +-
 drivers/clk/mediatek/clk-mt8183.c             |    2 +-
 drivers/clk/meson/axg.c                       |    2 +
 drivers/clk/qcom/dispcc-sdm845.c              |    2 +
 drivers/clk/qcom/gcc-ipq5018.c                |    6 +-
 drivers/clk/qcom/reset.c                      |   27 +-
 drivers/clk/renesas/r8a779f0-cpg-mssr.c       |    2 +-
 drivers/clk/renesas/r8a779g0-cpg-mssr.c       |   11 +-
 drivers/clk/renesas/r9a07g043-cpg.c           |    2 +-
 drivers/clk/renesas/r9a07g044-cpg.c           |    2 +-
 drivers/clk/samsung/clk-exynos850.c           |   33 +-
 drivers/clk/zynq/clkc.c                       |    8 +-
 drivers/comedi/drivers/comedi_8255.c          |    1 +
 drivers/comedi/drivers/comedi_test.c          |   30 +-
 drivers/cpufreq/Kconfig.arm                   |    1 +
 drivers/cpufreq/brcmstb-avs-cpufreq.c         |    2 +
 drivers/cpufreq/cpufreq.c                     |   18 +-
 drivers/cpufreq/freq_table.c                  |    2 +-
 drivers/cpufreq/mediatek-cpufreq-hw.c         |   19 +-
 drivers/crypto/ccp/platform-access.c          |   11 +-
 .../intel/qat/qat_4xxx/adf_4xxx_hw_data.c     |   37 +-
 .../intel/qat/qat_common/adf_cfg_services.c   |   27 +
 .../intel/qat/qat_common/adf_cfg_services.h   |    4 +
 .../crypto/intel/qat/qat_common/adf_clock.c   |    3 +
 .../intel/qat/qat_common/adf_cnv_dbgfs.c      |    1 -
 .../intel/qat/qat_common/adf_gen4_ras.c       |    6 +-
 .../intel/qat/qat_common/qat_comp_algs.c      |    9 -
 drivers/crypto/xilinx/zynqmp-aes-gcm.c        |    3 +
 drivers/cxl/core/region.c                     |   62 +-
 drivers/dma/Kconfig                           |   14 +-
 drivers/dpll/dpll_core.c                      |    8 +-
 drivers/firewire/core-card.c                  |   14 +-
 drivers/firmware/arm_scmi/smc.c               |    7 +
 drivers/firmware/efi/libstub/x86-stub.c       |    7 +-
 drivers/gpio/Kconfig                          |    3 +-
 drivers/gpio/gpiolib-devres.c                 |    2 +-
 drivers/gpio/gpiolib.c                        |   14 +-
 drivers/gpio/gpiolib.h                        |    8 +
 drivers/gpu/drm/Kconfig                       |    5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c |    6 +-
 drivers/gpu/drm/amd/amdgpu/atom.c             |    2 +-
 drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c        |    1 +
 drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c       |    8 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c      |   23 +-
 drivers/gpu/drm/amd/amdgpu/soc15.c            |   45 +-
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   16 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c |    2 +-
 .../display/dc/dml2/dml2_translation_helper.c |    9 +-
 .../amd/display/dc/hwss/dcn10/dcn10_hwseq.c   |    7 +-
 .../link/protocols/link_edp_panel_control.c   |    3 +-
 .../gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c |    4 +-
 .../drm/amd/pm/swsmu/smu13/aldebaran_ppt.c    |    4 +-
 .../drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c  |    4 +-
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c  |   22 +-
 drivers/gpu/drm/ci/test.yml                   |    5 +-
 drivers/gpu/drm/drm_buddy.c                   |    6 +-
 drivers/gpu/drm/lima/lima_gem.c               |   23 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   12 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |   10 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c         |    2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c   |   11 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h   |    7 +
 .../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c  |    7 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c    |   19 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h    |   16 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    |   12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |   10 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c    |    7 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c   |   16 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h   |   12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c   |   31 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h   |   14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c     |   14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h     |   12 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c    |   14 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h    |   13 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   |   15 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   |   14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c   |   17 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h   |   16 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    |   17 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h    |    8 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c     |   15 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h     |   13 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   19 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |    1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        |   90 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h        |   11 +-
 drivers/gpu/drm/nouveau/nouveau_bo.c          |    2 +
 .../drm/nouveau/nvkm/subdev/devinit/r535.c    |    1 -
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    |    2 +
 drivers/gpu/drm/panel/panel-edp.c             |    3 +-
 drivers/gpu/drm/radeon/ni.c                   |    2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c          |    4 +-
 drivers/gpu/drm/rockchip/rockchip_lvds.c      |    3 +-
 drivers/gpu/drm/tegra/dpaux.c                 |   14 +-
 drivers/gpu/drm/tegra/dsi.c                   |   59 +-
 drivers/gpu/drm/tegra/fb.c                    |    1 +
 drivers/gpu/drm/tegra/hdmi.c                  |   20 +-
 drivers/gpu/drm/tegra/output.c                |   16 +-
 drivers/gpu/drm/tegra/rgb.c                   |   18 +-
 drivers/gpu/drm/tidss/tidss_crtc.c            |   10 +
 drivers/gpu/drm/tidss/tidss_plane.c           |    2 +-
 drivers/gpu/drm/vkms/vkms_composer.c          |   14 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c |    5 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c           |   11 +-
 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c        |   30 +-
 drivers/hid/amd-sfh-hid/amd_sfh_pcie.h        |    6 +-
 drivers/hid/hid-lenovo.c                      |   57 +-
 drivers/hid/hid-logitech-hidpp.c              |   13 +-
 drivers/hid/hid-multitouch.c                  |    4 +
 drivers/hv/Kconfig                            |    1 +
 drivers/hwtracing/coresight/coresight-core.c  |   30 +-
 .../hwtracing/coresight/coresight-etm-perf.c  |    2 +-
 .../coresight/coresight-etm4x-core.c          |   10 +-
 drivers/hwtracing/coresight/coresight-priv.h  |    2 +-
 drivers/hwtracing/ptt/hisi_ptt.c              |    6 +-
 drivers/i3c/master/dw-i3c-master.c            |    4 +-
 drivers/iio/industrialio-gts-helper.c         |   15 +-
 drivers/iio/pressure/mprls0025pa.c            |    4 +-
 drivers/infiniband/core/device.c              |   37 +-
 drivers/infiniband/hw/hns/hns_roce_device.h   |   17 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c    |   16 +-
 drivers/infiniband/hw/irdma/verbs.c           |    3 +-
 drivers/infiniband/hw/mana/main.c             |    2 +-
 drivers/infiniband/hw/mlx5/devx.c             |    2 +-
 drivers/infiniband/hw/mlx5/wr.c               |    2 +-
 drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c  |    2 +-
 drivers/infiniband/ulp/srpt/ib_srpt.c         |    3 +-
 drivers/input/keyboard/gpio_keys_polled.c     |   10 +-
 drivers/input/misc/iqs7222.c                  |  112 ++
 drivers/iommu/Kconfig                         |    2 +-
 drivers/iommu/amd/init.c                      |    3 +
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |    8 +-
 drivers/iommu/intel/Makefile                  |    2 +
 drivers/iommu/intel/pasid.c                   |    3 +
 drivers/iommu/irq_remapping.c                 |    3 +-
 drivers/leds/flash/leds-sgm3140.c             |    3 +
 drivers/leds/leds-aw2013.c                    |    1 +
 drivers/md/dm-bufio.c                         |    6 +-
 drivers/md/dm-crypt.c                         |    4 +-
 drivers/md/dm-integrity.c                     |   30 +-
 drivers/md/dm-io.c                            |   23 +-
 drivers/md/dm-kcopyd.c                        |    4 +-
 drivers/md/dm-log.c                           |    4 +-
 drivers/md/dm-raid.c                          |    4 +-
 drivers/md/dm-raid1.c                         |    6 +-
 drivers/md/dm-snap-persistent.c               |    4 +-
 drivers/md/dm-verity-target.c                 |    2 +-
 drivers/md/dm-verity.h                        |    4 +-
 drivers/md/dm-writecache.c                    |    8 +-
 drivers/md/dm.c                               |   26 +-
 drivers/md/md-multipath.c                     |    9 -
 drivers/md/md.c                               |   52 +-
 drivers/md/md.h                               |    6 +-
 drivers/md/raid1.c                            |  199 +--
 drivers/md/raid1.h                            |    1 +
 drivers/md/raid10.c                           |    9 -
 drivers/md/raid5.c                            |    9 -
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c |   52 +-
 drivers/media/dvb-core/dvbdev.c               |    5 +
 drivers/media/dvb-frontends/stv0367.c         |   34 +-
 drivers/media/i2c/imx290.c                    |   16 +-
 drivers/media/i2c/tc358743.c                  |    7 +-
 drivers/media/pci/intel/ivsc/mei_csi.c        |    4 +-
 drivers/media/pci/ttpci/budget-av.c           |    8 +-
 drivers/media/platform/cadence/cdns-csi2rx.c  |    2 +-
 .../media/platform/mediatek/mdp/mtk_mdp_vpu.c |    2 +-
 .../vcodec/common/mtk_vcodec_fw_vpu.c         |   10 +-
 drivers/media/platform/mediatek/vpu/mtk_vpu.c |    2 +-
 drivers/media/platform/mediatek/vpu/mtk_vpu.h |    2 +-
 .../platform/rockchip/rkisp1/rkisp1-capture.c |    3 +
 .../platform/rockchip/rkisp1/rkisp1-common.h  |    2 +
 .../platform/rockchip/rkisp1/rkisp1-csi.c     |    3 +
 .../platform/rockchip/rkisp1/rkisp1-dev.c     |   22 +
 .../platform/rockchip/rkisp1/rkisp1-isp.c     |    3 +
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  |   69 +-
 drivers/media/usb/em28xx/em28xx-cards.c       |    4 +
 drivers/media/usb/go7007/go7007-driver.c      |    8 +-
 drivers/media/usb/go7007/go7007-usb.c         |    4 +-
 drivers/media/usb/pvrusb2/pvrusb2-context.c   |   10 +-
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c       |    6 +-
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c      |   11 +-
 drivers/media/v4l2-core/v4l2-cci.c            |    4 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c        |   10 +-
 drivers/memory/tegra/tegra234.c               |   16 +-
 drivers/mfd/altera-sysmgr.c                   |    4 +-
 drivers/mfd/cs42l43.c                         |   72 +-
 drivers/mfd/syscon.c                          |    4 +-
 drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c    |    8 +-
 drivers/mmc/host/wmt-sdmmc.c                  |    4 -
 drivers/mtd/maps/physmap-core.c               |    2 +-
 drivers/mtd/nand/raw/lpc32xx_mlc.c            |    5 +-
 drivers/mtd/nand/spi/esmt.c                   |    9 +-
 drivers/net/can/m_can/m_can.c                 |   23 +-
 drivers/net/dsa/microchip/ksz_common.c        |   10 +-
 drivers/net/dsa/mt7530.c                      |   60 +-
 drivers/net/dsa/mt7530.h                      |   22 +-
 drivers/net/ethernet/amazon/ena/ena_netdev.c  |   17 -
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h   |    6 +-
 .../net/ethernet/hisilicon/hns3/hns3_dcbnl.c  |    2 +-
 .../hisilicon/hns3/hns3pf/hclge_main.c        |    5 +-
 .../hisilicon/hns3/hns3pf/hclge_ptp.c         |    2 +-
 drivers/net/ethernet/intel/ice/ice_main.c     |   24 +-
 drivers/net/ethernet/intel/igb/igb_main.c     |   23 +-
 drivers/net/ethernet/intel/igc/igc_main.c     |   12 +-
 .../net/ethernet/marvell/octeontx2/af/cgx.c   |    2 +-
 .../net/ethernet/marvell/octeontx2/af/mbox.c  |   43 +-
 .../net/ethernet/marvell/octeontx2/af/mbox.h  |    6 +
 .../marvell/octeontx2/af/mcs_rvu_if.c         |   17 +-
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |   31 +-
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |    2 +
 .../ethernet/marvell/octeontx2/af/rvu_cgx.c   |   20 +-
 .../marvell/octeontx2/nic/otx2_common.c       |    2 +-
 .../marvell/octeontx2/nic/otx2_common.h       |    2 +-
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  |  119 +-
 .../ethernet/marvell/octeontx2/nic/otx2_vf.c  |   71 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.c   |    7 +-
 drivers/net/ethernet/mediatek/mtk_ppe.c       |   18 +-
 .../ethernet/netronome/nfp/flower/lag_conf.c  |    5 +
 .../net/ethernet/wangxun/txgbe/txgbe_phy.c    |    2 +-
 drivers/net/phy/dp83822.c                     |   37 +-
 drivers/net/phy/phy_device.c                  |    6 +-
 drivers/net/usb/smsc95xx.c                    |    5 +
 drivers/net/usb/sr9800.c                      |    4 +-
 drivers/net/veth.c                            |   18 -
 drivers/net/vmxnet3/vmxnet3_xdp.c             |    6 +-
 drivers/net/wireguard/receive.c               |    6 +-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c     |    4 +
 drivers/net/wireless/ath/ath11k/mac.c         |   17 +-
 drivers/net/wireless/ath/ath12k/core.h        |    2 +-
 drivers/net/wireless/ath/ath12k/dbring.c      |    2 +-
 drivers/net/wireless/ath/ath12k/debug.c       |    2 +-
 drivers/net/wireless/ath/ath12k/dp_tx.c       |    2 +-
 drivers/net/wireless/ath/ath12k/hal.c         |    6 +-
 drivers/net/wireless/ath/ath12k/hal.h         |    2 +-
 drivers/net/wireless/ath/ath12k/hal_rx.c      |    2 +-
 drivers/net/wireless/ath/ath12k/hif.h         |    2 +-
 drivers/net/wireless/ath/ath12k/hw.c          |    2 +-
 drivers/net/wireless/ath/ath12k/hw.h          |    2 +-
 drivers/net/wireless/ath/ath12k/mac.c         |    6 +-
 drivers/net/wireless/ath/ath12k/mac.h         |    2 +-
 drivers/net/wireless/ath/ath12k/mhi.c         |    2 +-
 drivers/net/wireless/ath/ath12k/pci.c         |    2 +-
 drivers/net/wireless/ath/ath12k/pci.h         |    2 +-
 drivers/net/wireless/ath/ath12k/peer.h        |    2 +-
 drivers/net/wireless/ath/ath12k/qmi.c         |    2 +-
 drivers/net/wireless/ath/ath12k/qmi.h         |    2 +-
 drivers/net/wireless/ath/ath12k/reg.c         |    6 +-
 drivers/net/wireless/ath/ath12k/reg.h         |    2 +-
 drivers/net/wireless/ath/ath12k/rx_desc.h     |    2 +-
 drivers/net/wireless/ath/ath12k/wmi.c         |    2 +-
 drivers/net/wireless/ath/ath9k/htc.h          |    2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |    4 +
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c |    4 -
 drivers/net/wireless/ath/ath9k/wmi.c          |   10 +-
 drivers/net/wireless/broadcom/b43/b43.h       |   16 +
 drivers/net/wireless/broadcom/b43/dma.c       |    4 +-
 drivers/net/wireless/broadcom/b43/main.c      |   16 +-
 drivers/net/wireless/broadcom/b43/pio.c       |    6 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c    |    3 +
 .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c |    3 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.c    |    5 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.h    |    2 +-
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c  |   12 +-
 drivers/net/wireless/intel/iwlwifi/fw/acpi.h  |    2 +-
 .../net/wireless/intel/iwlwifi/fw/api/txq.h   |   12 +-
 drivers/net/wireless/intel/iwlwifi/fw/pnvm.c  |   30 +-
 .../net/wireless/intel/iwlwifi/fw/runtime.h   |    2 +-
 .../net/wireless/intel/iwlwifi/iwl-dbg-tlv.c  |    6 +
 .../wireless/intel/iwlwifi/iwl-nvm-parse.c    |    2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c   |   21 +-
 .../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c |   11 +
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c |   25 +-
 .../net/wireless/intel/iwlwifi/mvm/mld-key.c  |   18 +-
 .../net/wireless/intel/iwlwifi/mvm/mld-mac.c  |    2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h  |   10 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c |   26 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c  |   28 +
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h  |    3 +-
 .../wireless/intel/iwlwifi/mvm/time-event.c   |   11 +-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c   |   81 +-
 drivers/net/wireless/marvell/libertas/cmd.c   |   13 +-
 .../net/wireless/marvell/mwifiex/debugfs.c    |    3 -
 .../wireless/mediatek/mt76/mt76_connac_mcu.c  |    2 +-
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |   28 +
 .../net/wireless/mediatek/mt76/mt7921/mcu.c   |    4 +-
 .../net/wireless/mediatek/mt76/mt7921/pci.c   |    1 +
 .../net/wireless/mediatek/mt76/mt7925/main.c  |   26 +-
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   |  176 +--
 .../net/wireless/mediatek/mt76/mt7925/mcu.h   |   92 +-
 .../net/wireless/mediatek/mt76/mt7925/pci.c   |    3 +
 .../wireless/mediatek/mt76/mt792x_acpi_sar.c  |   26 +-
 .../net/wireless/mediatek/mt76/mt792x_core.c  |    1 +
 .../net/wireless/mediatek/mt76/mt792x_dma.c   |   15 +-
 .../net/wireless/mediatek/mt76/mt792x_regs.h  |    8 +
 .../net/wireless/mediatek/mt76/mt7996/init.c  |    7 +-
 .../net/wireless/mediatek/mt76/mt7996/mac.c   |   76 +-
 .../net/wireless/mediatek/mt76/mt7996/main.c  |   12 +-
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   |  157 ++-
 .../net/wireless/mediatek/mt76/mt7996/mcu.h   |   17 +
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |    6 +-
 .../wireless/microchip/wilc1000/cfg80211.c    |   12 +-
 drivers/net/wireless/microchip/wilc1000/hif.c |   40 +-
 .../net/wireless/microchip/wilc1000/netdev.c  |   38 +-
 drivers/net/wireless/microchip/wilc1000/spi.c |    6 +-
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |    1 +
 drivers/net/wireless/realtek/rtw88/main.c     |    2 -
 drivers/net/wireless/realtek/rtw88/phy.c      |    3 +
 drivers/net/wireless/realtek/rtw88/rtw8821c.c |    2 +-
 drivers/net/wireless/realtek/rtw88/usb.c      |   40 +
 drivers/net/wireless/silabs/wfx/sta.c         |   15 +-
 drivers/ntb/core.c                            |    8 +-
 drivers/nvme/host/core.c                      |    6 +-
 drivers/nvme/host/fabrics.h                   |    7 -
 drivers/opp/debugfs.c                         |    6 +-
 drivers/pci/controller/pcie-brcmstb.c         |    2 +-
 drivers/pci/endpoint/functions/pci-epf-vntb.c |    6 +-
 drivers/pci/p2pdma.c                          |    2 +-
 drivers/pci/pci.h                             |    5 -
 drivers/pci/pcie/dpc.c                        |    2 +-
 drivers/pci/quirks.c                          |    1 +
 drivers/pci/switch/switchtec.c                |    4 +-
 drivers/perf/arm-cmn.c                        |   11 +
 drivers/perf/cxl_pmu.c                        |   10 +-
 drivers/perf/riscv_pmu_sbi.c                  |    8 +-
 drivers/pinctrl/mediatek/pinctrl-mt8186.c     |    1 -
 drivers/pinctrl/mediatek/pinctrl-mt8192.c     |    1 -
 drivers/pinctrl/nomadik/pinctrl-nomadik.c     |    6 +-
 drivers/pinctrl/renesas/core.c                |    4 +-
 drivers/pinctrl/renesas/pfc-r8a779g0.c        |   14 +
 drivers/platform/x86/p2sb.c                   |   25 +-
 .../platform/x86/x86-android-tablets/other.c  |    4 +-
 drivers/pmdomain/qcom/rpmhpd.c                |    1 -
 drivers/power/supply/mm8013.c                 |   13 +-
 drivers/powercap/dtpm_cpu.c                   |    2 +-
 drivers/pwm/pwm-atmel-hlcdc.c                 |    2 +-
 drivers/pwm/pwm-sti.c                         |   11 +-
 drivers/regulator/max5970-regulator.c         |    8 +-
 drivers/regulator/userspace-consumer.c        |    1 +
 drivers/remoteproc/stm32_rproc.c              |    6 +-
 drivers/rtc/Kconfig                           |    3 +-
 drivers/rtc/lib_test.c                        |    2 +-
 drivers/s390/block/dasd.c                     |   55 +-
 drivers/scsi/bfa/bfa.h                        |    9 +-
 drivers/scsi/bfa/bfa_core.c                   |    4 +-
 drivers/scsi/bfa/bfa_ioc.h                    |    8 +-
 drivers/scsi/bfa/bfad_bsg.c                   |   11 +-
 drivers/scsi/csiostor/csio_defs.h             |   18 +-
 drivers/scsi/csiostor/csio_lnode.c            |    8 +-
 drivers/scsi/csiostor/csio_lnode.h            |   13 -
 drivers/scsi/hisi_sas/hisi_sas_main.c         |   12 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c           |    4 +-
 drivers/soc/fsl/dpio/dpio-service.c           |    2 +-
 drivers/soc/microchip/Kconfig                 |    2 +-
 drivers/soc/qcom/llcc-qcom.c                  |    2 +
 drivers/soc/qcom/pmic_glink_altmode.c         |   16 +-
 drivers/soc/qcom/socinfo.c                    |    2 +-
 drivers/spi/spi-cadence-quadspi.c             |   24 +-
 drivers/spi/spi-fsl-lpspi.c                   |    8 +-
 drivers/spi/spi-imx.c                         |    4 +-
 drivers/spi/spi-intel-pci.c                   |    1 +
 drivers/spi/spi-mt65xx.c                      |   22 +-
 drivers/staging/greybus/light.c               |    8 +-
 .../staging/media/imx/imx-media-csc-scaler.c  |    1 +
 .../staging/media/sunxi/cedrus/cedrus_h265.c  |   10 +-
 drivers/thermal/mediatek/lvts_thermal.c       |    4 +-
 drivers/thermal/qoriq_thermal.c               |   12 +-
 drivers/tty/serial/8250/8250_exar.c           |    5 +-
 drivers/tty/serial/max310x.c                  |    2 +-
 drivers/tty/serial/samsung_tty.c              |    5 +-
 drivers/tty/vt/vt.c                           |    2 +-
 drivers/usb/gadget/udc/net2272.c              |    2 +-
 drivers/usb/phy/phy-generic.c                 |    7 +
 drivers/vdpa/mlx5/net/mlx5_vnet.c             |   13 +-
 drivers/vdpa/vdpa_sim/vdpa_sim.c              |    3 +-
 drivers/video/backlight/da9052_bl.c           |    1 +
 drivers/video/backlight/ktz8866.c             |    6 +-
 drivers/video/backlight/lm3630a_bl.c          |   15 +-
 drivers/video/backlight/lm3639_bl.c           |    1 +
 drivers/video/backlight/lp8788_bl.c           |    1 +
 drivers/virtio/virtio_ring.c                  |    6 +-
 drivers/watchdog/starfive-wdt.c               |    9 +-
 drivers/watchdog/stm32_iwdg.c                 |    3 +
 drivers/xen/events/events_base.c              |   22 +-
 drivers/xen/evtchn.c                          |    6 +
 fs/afs/dir.c                                  |   10 -
 fs/bcachefs/btree_iter.c                      |    4 +-
 fs/bcachefs/chardev.c                         |    3 +-
 fs/bcachefs/errcode.h                         |    1 +
 fs/bcachefs/mean_and_variance.h               |    2 +-
 fs/bcachefs/super-io.c                        |   27 +-
 fs/btrfs/block-rsv.c                          |    2 +-
 fs/btrfs/block-rsv.h                          |   32 +
 fs/btrfs/space-info.c                         |   26 +-
 fs/btrfs/zoned.c                              |    9 +
 fs/ceph/caps.c                                |   65 +-
 fs/ceph/file.c                                |   23 +-
 fs/ceph/mds_client.c                          |   48 +
 fs/ceph/mds_client.h                          |    5 +
 fs/erofs/fscache.c                            |   20 +-
 fs/erofs/internal.h                           |    1 -
 fs/erofs/super.c                              |   30 +-
 fs/ext2/ext2.h                                |    2 +-
 fs/ext2/super.c                               |    2 +-
 fs/ext4/ext4.h                                |    2 +-
 fs/ext4/super.c                               |    2 +-
 fs/f2fs/checkpoint.c                          |    5 +-
 fs/f2fs/compress.c                            |   43 +-
 fs/f2fs/data.c                                |   73 +-
 fs/f2fs/dir.c                                 |    5 +-
 fs/f2fs/f2fs.h                                |  109 +-
 fs/f2fs/file.c                                |   94 +-
 fs/f2fs/gc.c                                  |    7 +-
 fs/f2fs/inode.c                               |   57 +-
 fs/f2fs/namei.c                               |   25 +-
 fs/f2fs/node.c                                |   20 +-
 fs/f2fs/recovery.c                            |   33 +-
 fs/f2fs/segment.c                             |   25 +-
 fs/f2fs/segment.h                             |   17 +-
 fs/f2fs/super.c                               |   17 +-
 fs/fcntl.c                                    |   12 +-
 fs/fhandle.c                                  |    2 +-
 fs/iomap/buffered-io.c                        |   18 +-
 fs/jfs/jfs_incore.h                           |    2 +-
 fs/jfs/super.c                                |    2 +-
 fs/nfs/flexfilelayout/flexfilelayout.c        |    2 +-
 fs/nfs/fscache.c                              |    9 +-
 fs/nfs/nfs42.h                                |    7 +-
 fs/nfs/nfs4proc.c                             |   16 +-
 fs/nfs/nfsroot.c                              |    4 +-
 fs/nfs/pnfs_nfs.c                             |   44 +-
 fs/ocfs2/inode.h                              |    2 +-
 fs/ocfs2/super.c                              |    2 +-
 fs/overlayfs/params.c                         |   14 +-
 fs/pstore/inode.c                             |   76 +-
 fs/quota/dquot.c                              |  159 ++-
 fs/reiserfs/reiserfs.h                        |    2 +-
 fs/reiserfs/super.c                           |    2 +-
 fs/select.c                                   |    2 +-
 fs/smb/client/file.c                          |  295 +++--
 include/drm/drm_fixed.h                       |    5 +-
 include/drm/drm_kunit_helpers.h               |    2 +
 include/dt-bindings/clock/r8a779g0-cpg-mssr.h |    1 +
 include/linux/dm-io.h                         |    3 +-
 include/linux/f2fs_fs.h                       |    1 +
 include/linux/filter.h                        |   21 +-
 include/linux/fs.h                            |   11 +-
 include/linux/io_uring.h                      |    9 +-
 include/linux/io_uring_types.h                |    3 -
 include/linux/mlx5/qp.h                       |    5 +-
 include/linux/moduleloader.h                  |    8 +
 include/linux/pci.h                           |    5 +
 include/linux/poll.h                          |    4 -
 include/linux/rcupdate.h                      |   31 +
 include/linux/shmem_fs.h                      |    2 +-
 include/linux/workqueue.h                     |   35 +-
 include/net/bluetooth/hci.h                   |    2 -
 include/net/bluetooth/hci_core.h              |    1 +
 include/net/bluetooth/hci_sync.h              |    2 +-
 include/net/bluetooth/l2cap.h                 |   42 -
 include/soc/qcom/qcom-spmi-pmic.h             |    2 +-
 include/sound/tas2781.h                       |    5 +
 init/main.c                                   |    5 +-
 io_uring/filetable.c                          |   11 +-
 io_uring/io_uring.c                           |  161 +--
 io_uring/io_uring.h                           |    1 -
 io_uring/net.c                                |  260 ++--
 io_uring/poll.c                               |    4 +-
 io_uring/rsrc.c                               |  169 +--
 io_uring/rsrc.h                               |   15 -
 kernel/bpf/btf.c                              |    3 +
 kernel/bpf/core.c                             |    7 +-
 kernel/bpf/cpumap.c                           |    3 +
 kernel/bpf/devmap.c                           |   11 +-
 kernel/bpf/hashtab.c                          |   14 +-
 kernel/bpf/helpers.c                          |    4 +-
 kernel/bpf/stackmap.c                         |    9 +-
 kernel/bpf/verifier.c                         |    2 +
 kernel/module/main.c                          |    9 +-
 kernel/printk/internal.h                      |    1 +
 kernel/printk/nbcon.c                         |   41 +-
 kernel/printk/printk.c                        |   74 +-
 kernel/printk/printk_ringbuffer.c             |  313 ++++-
 kernel/printk/printk_ringbuffer.h             |   38 +-
 kernel/rcu/tree.c                             |    3 +
 kernel/rcu/tree_exp.h                         |   25 +-
 kernel/sched/fair.c                           |   16 +-
 kernel/time/time_test.c                       |    2 +-
 kernel/time/timekeeping.c                     |   24 +-
 kernel/workqueue.c                            |  755 ++++++++++--
 lib/cmdline_kunit.c                           |    2 +-
 lib/kunit/executor_test.c                     |    2 +-
 lib/memcpy_kunit.c                            |    4 +-
 lib/test_blackhole_dev.c                      |    3 +-
 mm/shmem.c                                    |    2 +-
 net/bluetooth/Kconfig                         |    8 -
 net/bluetooth/Makefile                        |    1 -
 net/bluetooth/a2mp.c                          | 1054 ----------------
 net/bluetooth/a2mp.h                          |  154 ---
 net/bluetooth/af_bluetooth.c                  |   10 +-
 net/bluetooth/amp.c                           |  590 ---------
 net/bluetooth/amp.h                           |   60 -
 net/bluetooth/eir.c                           |   29 +-
 net/bluetooth/hci_conn.c                      |    6 +-
 net/bluetooth/hci_core.c                      |  126 +-
 net/bluetooth/hci_event.c                     |   43 +-
 net/bluetooth/hci_request.c                   |    2 +-
 net/bluetooth/hci_sync.c                      |   41 +-
 net/bluetooth/l2cap_core.c                    | 1069 +----------------
 net/bluetooth/l2cap_sock.c                    |   18 +-
 net/bluetooth/mgmt.c                          |  101 +-
 net/bluetooth/msft.c                          |    3 +
 net/bluetooth/rfcomm/core.c                   |    2 +-
 net/core/dev.c                                |    5 +-
 net/core/gso_test.c                           |    2 +-
 net/core/scm.c                                |    2 +-
 net/core/skbuff.c                             |    8 +
 net/core/sock_diag.c                          |   10 +-
 net/devlink/core.c                            |    4 +-
 net/devlink/devl_internal.h                   |   21 +-
 net/devlink/health.c                          |    3 +-
 net/devlink/netlink.c                         |   41 +-
 net/devlink/netlink_gen.c                     |    2 +-
 net/devlink/port.c                            |    2 +-
 net/devlink/region.c                          |    3 +-
 net/hsr/hsr_framereg.c                        |    4 +
 net/hsr/hsr_main.c                            |   15 +-
 net/ipv4/inet_diag.c                          |    6 +-
 net/ipv4/inet_hashtables.c                    |    2 +-
 net/ipv4/inet_timewait_sock.c                 |   41 +-
 net/ipv4/ip_tunnel.c                          |   15 +-
 net/ipv4/ipmr.c                               |    4 +-
 net/ipv4/raw.c                                |    1 +
 net/ipv4/tcp.c                                |    4 +-
 net/ipv4/tcp_minisocks.c                      |    4 -
 net/ipv4/udp.c                                |    4 +-
 net/ipv6/fib6_rules.c                         |    6 +
 net/ipv6/mcast.c                              |    1 -
 net/iucv/iucv.c                               |    4 +-
 net/kcm/kcmsock.c                             |    3 +-
 net/l2tp/l2tp_ppp.c                           |    4 +-
 net/mac80211/mlme.c                           |    4 +-
 net/mac80211/rate.c                           |    3 +-
 net/mctp/route.c                              |    3 +
 net/netfilter/nf_tables_api.c                 |   29 +-
 net/netfilter/nft_set_pipapo.c                |    5 +-
 net/packet/af_packet.c                        |    4 +-
 net/rds/send.c                                |    5 +-
 net/sched/sch_taprio.c                        |    3 +-
 net/sunrpc/addr.c                             |    4 +-
 net/sunrpc/auth_gss/gss_krb5_mech.c           |   11 +-
 net/sunrpc/auth_gss/gss_rpc_xdr.c             |   27 +-
 net/unix/garbage.c                            |    2 +-
 net/unix/scm.c                                |    4 +-
 net/x25/af_x25.c                              |    4 +-
 net/xfrm/xfrm_device.c                        |    3 +-
 net/xfrm/xfrm_output.c                        |    6 +-
 net/xfrm/xfrm_policy.c                        |    4 +-
 scripts/clang-tools/gen_compile_commands.py   |    2 +-
 scripts/kconfig/lexer.l                       |    7 +-
 sound/core/seq/seq_midi.c                     |    8 +-
 sound/core/seq/seq_virmidi.c                  |    9 +-
 sound/pci/hda/cs35l41_hda_property.c          |   20 +-
 sound/pci/hda/patch_realtek.c                 |   66 +
 sound/pci/hda/tas2781_hda_i2c.c               |   62 +-
 sound/soc/amd/acp/acp-sof-mach.c              |   14 +-
 sound/soc/amd/yc/acp6x-mach.c                 |   28 +
 sound/soc/codecs/cs42l43.c                    |    5 +-
 sound/soc/codecs/rt5645.c                     |   10 +
 sound/soc/codecs/tas2781-comlib.c             |   15 +
 sound/soc/codecs/tlv320adc3xxx.c              |    4 +-
 sound/soc/codecs/wm8962.c                     |   29 +-
 sound/soc/intel/boards/bytcr_rt5640.c         |   12 +
 sound/soc/meson/aiu.c                         |   19 +-
 sound/soc/meson/aiu.h                         |    1 -
 sound/soc/meson/axg-tdm-interface.c           |   29 +-
 sound/soc/meson/t9015.c                       |   20 +-
 sound/soc/rockchip/rockchip_i2s_tdm.c         |  352 +-----
 sound/soc/sh/rz-ssi.c                         |    2 +-
 sound/soc/sof/amd/acp.c                       |   28 +-
 sound/soc/sof/ipc3-loader.c                   |    2 +
 sound/soc/sof/ipc4-pcm.c                      |   13 +-
 sound/usb/stream.c                            |    5 +-
 tools/bpf/bpftool/prog.c                      |    2 +-
 tools/bpf/resolve_btfids/main.c               |   70 +-
 tools/include/linux/btf_ids.h                 |    9 +
 tools/lib/bpf/bpf.h                           |    2 +-
 tools/lib/bpf/libbpf.c                        |    4 +
 tools/lib/bpf/libbpf_internal.h               |   14 +
 tools/lib/bpf/netlink.c                       |    4 +-
 tools/objtool/check.c                         |   12 +
 tools/perf/Makefile.perf                      |    2 +-
 tools/perf/builtin-record.c                   |   35 +-
 tools/perf/builtin-top.c                      |    1 +
 tools/perf/util/data.c                        |    2 -
 tools/perf/util/evlist.c                      |   25 +
 tools/perf/util/evlist.h                      |    1 +
 tools/perf/util/evsel.c                       |    1 -
 tools/perf/util/expr.c                        |   20 +-
 tools/perf/util/pmu.c                         |   19 +-
 tools/perf/util/print-events.c                |   27 +-
 tools/perf/util/srcline.c                     |    2 +
 tools/perf/util/stat-display.c                |    2 +-
 tools/perf/util/stat-shadow.c                 |    7 +-
 tools/perf/util/thread_map.c                  |    2 +-
 .../selftests/bpf/bpf_testmod/bpf_testmod.c   |    9 +
 .../selftests/bpf/prog_tests/lwt_redirect.c   |    1 +
 .../selftests/bpf/prog_tests/tc_redirect.c    |   90 +-
 .../bpf/progs/test_global_func_ctx_args.c     |   19 +
 .../selftests/bpf/progs/test_map_in_map.c     |   26 +
 tools/testing/selftests/bpf/test_maps.c       |    6 +-
 tools/testing/selftests/bpf/trace_helpers.c   |    2 +-
 tools/testing/selftests/net/forwarding/config |   35 +
 .../net/forwarding/vxlan_bridge_1d_ipv6.sh    |    4 +-
 .../net/forwarding/vxlan_bridge_1q_ipv6.sh    |    4 +-
 .../selftests/net/openvswitch/openvswitch.sh  |   13 +
 .../selftests/net/openvswitch/ovs-dpctl.py    |   71 +-
 tools/testing/selftests/net/tls.c             |    8 +-
 816 files changed, 7409 insertions(+), 7736 deletions(-)
 delete mode 100644 net/bluetooth/a2mp.c
 delete mode 100644 net/bluetooth/a2mp.h
 delete mode 100644 net/bluetooth/amp.c
 delete mode 100644 net/bluetooth/amp.h

-- 
2.43.0

[PATCH 6.7 001/713] platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit aec7d25b497ce4a8d044e9496de0aa433f7f8f06 ]

On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.

But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.

Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.

Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov <danilrybakov249@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov <danilrybakov249@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/p2sb.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c
index 17cc4b45e0239..a64f56ddd4a44 100644
--- a/drivers/platform/x86/p2sb.c
+++ b/drivers/platform/x86/p2sb.c
@@ -20,9 +20,11 @@
 #define P2SBC_HIDE		BIT(8)
 
 #define P2SB_DEVFN_DEFAULT	PCI_DEVFN(31, 1)
+#define P2SB_DEVFN_GOLDMONT	PCI_DEVFN(13, 0)
+#define SPI_DEVFN_GOLDMONT	PCI_DEVFN(13, 2)
 
 static const struct x86_cpu_id p2sb_cpu_ids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	PCI_DEVFN(13, 0)),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, P2SB_DEVFN_GOLDMONT),
 	{}
 };
 
@@ -98,21 +100,12 @@ static void p2sb_scan_and_cache_devfn(struct pci_bus *bus, unsigned int devfn)
 
 static int p2sb_scan_and_cache(struct pci_bus *bus, unsigned int devfn)
 {
-	unsigned int slot, fn;
-
-	if (PCI_FUNC(devfn) == 0) {
-		/*
-		 * When function number of the P2SB device is zero, scan it and
-		 * other function numbers, and if devices are available, cache
-		 * their BAR0s.
-		 */
-		slot = PCI_SLOT(devfn);
-		for (fn = 0; fn < NR_P2SB_RES_CACHE; fn++)
-			p2sb_scan_and_cache_devfn(bus, PCI_DEVFN(slot, fn));
-	} else {
-		/* Scan the P2SB device and cache its BAR0 */
-		p2sb_scan_and_cache_devfn(bus, devfn);
-	}
+	/* Scan the P2SB device and cache its BAR0 */
+	p2sb_scan_and_cache_devfn(bus, devfn);
+
+	/* On Goldmont p2sb_bar() also gets called for the SPI controller */
+	if (devfn == P2SB_DEVFN_GOLDMONT)
+		p2sb_scan_and_cache_devfn(bus, SPI_DEVFN_GOLDMONT);
 
 	if (!p2sb_valid_resource(&p2sb_resources[PCI_FUNC(devfn)].res))
 		return -ENOENT;
-- 
2.43.0

[PATCH 6.7 002/713] io_uring/unix: drop usage of io_uring socket

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

Commit a4104821ad651d8a0b374f0b2474c345bbb42f82 upstream.

Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to
using io_is_uring_fops() to detect whether this is a io_uring fd or not.
With that done, kill off io_uring_get_socket() as nobody calls it
anymore.

This is in preparation to yanking out the rest of the core related to
unix gc with io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/io_uring.h |  9 +++++----
 io_uring/io_uring.c      | 13 -------------
 io_uring/io_uring.h      |  1 -
 net/core/scm.c           |  2 +-
 net/unix/scm.c           |  4 +---
 5 files changed, 7 insertions(+), 22 deletions(-)

diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index aefb73eeeebff..b3a32687f5143 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -93,6 +93,7 @@ int io_uring_cmd_sock(struct io_uring_cmd *cmd, unsigned int issue_flags);
 void io_uring_cmd_mark_cancelable(struct io_uring_cmd *cmd,
 		unsigned int issue_flags);
 struct task_struct *io_uring_cmd_get_task(struct io_uring_cmd *cmd);
+bool io_is_uring_fops(struct file *file);
 #else
 static inline int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
 			      struct iov_iter *iter, void *ioucmd)
@@ -111,10 +112,6 @@ static inline void io_uring_cmd_do_in_task_lazy(struct io_uring_cmd *ioucmd,
 			void (*task_work_cb)(struct io_uring_cmd *, unsigned))
 {
 }
-static inline struct sock *io_uring_get_socket(struct file *file)
-{
-	return NULL;
-}
 static inline void io_uring_task_cancel(void)
 {
 }
@@ -141,6 +138,10 @@ static inline struct task_struct *io_uring_cmd_get_task(struct io_uring_cmd *cmd
 {
 	return NULL;
 }
+static inline bool io_is_uring_fops(struct file *file)
+{
+	return false;
+}
 #endif
 
 #endif
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 59f5791c90c31..06bd8795a87d1 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -177,19 +177,6 @@ static struct ctl_table kernel_io_uring_disabled_table[] = {
 };
 #endif
 
-struct sock *io_uring_get_socket(struct file *file)
-{
-#if defined(CONFIG_UNIX)
-	if (io_is_uring_fops(file)) {
-		struct io_ring_ctx *ctx = file->private_data;
-
-		return ctx->ring_sock->sk;
-	}
-#endif
-	return NULL;
-}
-EXPORT_SYMBOL(io_uring_get_socket);
-
 static inline void io_submit_flush_completions(struct io_ring_ctx *ctx)
 {
 	if (!wq_list_empty(&ctx->submit_state.compl_reqs) ||
diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h
index c9992cd7f1385..0d66a7058dbe1 100644
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -61,7 +61,6 @@ struct file *io_file_get_fixed(struct io_kiocb *req, int fd,
 			       unsigned issue_flags);
 
 void __io_req_task_work_add(struct io_kiocb *req, unsigned flags);
-bool io_is_uring_fops(struct file *file);
 bool io_alloc_async_data(struct io_kiocb *req);
 void io_req_task_queue(struct io_kiocb *req);
 void io_queue_iowq(struct io_kiocb *req, struct io_tw_state *ts_dont_use);
diff --git a/net/core/scm.c b/net/core/scm.c
index 7dc47c17d8638..737917c7ac627 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -105,7 +105,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
 		if (fd < 0 || !(file = fget_raw(fd)))
 			return -EBADF;
 		/* don't allow io_uring files */
-		if (io_uring_get_socket(file)) {
+		if (io_is_uring_fops(file)) {
 			fput(file);
 			return -EINVAL;
 		}
diff --git a/net/unix/scm.c b/net/unix/scm.c
index 6ff628f2349f5..822ce0d0d7915 100644
--- a/net/unix/scm.c
+++ b/net/unix/scm.c
@@ -35,10 +35,8 @@ struct sock *unix_get_socket(struct file *filp)
 		/* PF_UNIX ? */
 		if (s && ops && ops->family == PF_UNIX)
 			u_sock = s;
-	} else {
-		/* Could be an io_uring instance */
-		u_sock = io_uring_get_socket(filp);
 	}
+
 	return u_sock;
 }
 EXPORT_SYMBOL(unix_get_socket);
-- 
2.43.0

[PATCH 6.7 003/713] io_uring: drop any code related to SCM_RIGHTS

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

Commit 6e5e6d274956305f1fc0340522b38f5f5be74bdb upstream.

This is dead code after we dropped support for passing io_uring fds
over SCM_RIGHTS, get rid of it.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/io_uring_types.h |   3 -
 io_uring/filetable.c           |  11 +--
 io_uring/io_uring.c            |  32 +------
 io_uring/rsrc.c                | 169 +--------------------------------
 io_uring/rsrc.h                |  15 ---
 5 files changed, 10 insertions(+), 220 deletions(-)

diff --git a/include/linux/io_uring_types.h b/include/linux/io_uring_types.h
index 239a4f68801bb..335eca49dc8b0 100644
--- a/include/linux/io_uring_types.h
+++ b/include/linux/io_uring_types.h
@@ -358,9 +358,6 @@ struct io_ring_ctx {
 	struct wait_queue_head		rsrc_quiesce_wq;
 	unsigned			rsrc_quiesce;
 
-	#if defined(CONFIG_UNIX)
-		struct socket		*ring_sock;
-	#endif
 	/* hashed buffered write serialization */
 	struct io_wq_hash		*hash_map;
 
diff --git a/io_uring/filetable.c b/io_uring/filetable.c
index e7d749991de42..6e86e6188dbee 100644
--- a/io_uring/filetable.c
+++ b/io_uring/filetable.c
@@ -87,13 +87,10 @@ static int io_install_fixed_file(struct io_ring_ctx *ctx, struct file *file,
 		io_file_bitmap_clear(&ctx->file_table, slot_index);
 	}
 
-	ret = io_scm_file_account(ctx, file);
-	if (!ret) {
-		*io_get_tag_slot(ctx->file_data, slot_index) = 0;
-		io_fixed_file_set(file_slot, file);
-		io_file_bitmap_set(&ctx->file_table, slot_index);
-	}
-	return ret;
+	*io_get_tag_slot(ctx->file_data, slot_index) = 0;
+	io_fixed_file_set(file_slot, file);
+	io_file_bitmap_set(&ctx->file_table, slot_index);
+	return 0;
 }
 
 int __io_fixed_fd_install(struct io_ring_ctx *ctx, struct file *file,
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 06bd8795a87d1..f8d145fb40bbc 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -60,7 +60,6 @@
 #include <linux/net.h>
 #include <net/sock.h>
 #include <net/af_unix.h>
-#include <net/scm.h>
 #include <linux/anon_inodes.h>
 #include <linux/sched/mm.h>
 #include <linux/uaccess.h>
@@ -2939,13 +2938,6 @@ static __cold void io_ring_ctx_free(struct io_ring_ctx *ctx)
 		io_rsrc_node_destroy(ctx, ctx->rsrc_node);
 
 	WARN_ON_ONCE(!list_empty(&ctx->rsrc_ref_list));
-
-#if defined(CONFIG_UNIX)
-	if (ctx->ring_sock) {
-		ctx->ring_sock->file = NULL; /* so that iput() is called */
-		sock_release(ctx->ring_sock);
-	}
-#endif
 	WARN_ON_ONCE(!list_empty(&ctx->ltimeout_list));
 
 	io_alloc_cache_free(&ctx->rsrc_node_cache, io_rsrc_node_cache_free);
@@ -3867,32 +3859,12 @@ static int io_uring_install_fd(struct file *file)
 /*
  * Allocate an anonymous fd, this is what constitutes the application
  * visible backing of an io_uring instance. The application mmaps this
- * fd to gain access to the SQ/CQ ring details. If UNIX sockets are enabled,
- * we have to tie this fd to a socket for file garbage collection purposes.
+ * fd to gain access to the SQ/CQ ring details.
  */
 static struct file *io_uring_get_file(struct io_ring_ctx *ctx)
 {
-	struct file *file;
-#if defined(CONFIG_UNIX)
-	int ret;
-
-	ret = sock_create_kern(&init_net, PF_UNIX, SOCK_RAW, IPPROTO_IP,
-				&ctx->ring_sock);
-	if (ret)
-		return ERR_PTR(ret);
-#endif
-
-	file = anon_inode_getfile_secure("[io_uring]", &io_uring_fops, ctx,
+	return anon_inode_getfile_secure("[io_uring]", &io_uring_fops, ctx,
 					 O_RDWR | O_CLOEXEC, NULL);
-#if defined(CONFIG_UNIX)
-	if (IS_ERR(file)) {
-		sock_release(ctx->ring_sock);
-		ctx->ring_sock = NULL;
-	} else {
-		ctx->ring_sock->file = file;
-	}
-#endif
-	return file;
 }
 
 static __cold int io_uring_create(unsigned entries, struct io_uring_params *p,
diff --git a/io_uring/rsrc.c b/io_uring/rsrc.c
index f521c5965a933..4818b79231ddb 100644
--- a/io_uring/rsrc.c
+++ b/io_uring/rsrc.c
@@ -24,7 +24,6 @@ struct io_rsrc_update {
 };
 
 static void io_rsrc_buf_put(struct io_ring_ctx *ctx, struct io_rsrc_put *prsrc);
-static void io_rsrc_file_put(struct io_ring_ctx *ctx, struct io_rsrc_put *prsrc);
 static int io_sqe_buffer_register(struct io_ring_ctx *ctx, struct iovec *iov,
 				  struct io_mapped_ubuf **pimu,
 				  struct page **last_hpage);
@@ -157,7 +156,7 @@ static void io_rsrc_put_work(struct io_rsrc_node *node)
 
 	switch (node->type) {
 	case IORING_RSRC_FILE:
-		io_rsrc_file_put(node->ctx, prsrc);
+		fput(prsrc->file);
 		break;
 	case IORING_RSRC_BUFFER:
 		io_rsrc_buf_put(node->ctx, prsrc);
@@ -402,23 +401,13 @@ static int __io_sqe_files_update(struct io_ring_ctx *ctx,
 				break;
 			}
 			/*
-			 * Don't allow io_uring instances to be registered. If
-			 * UNIX isn't enabled, then this causes a reference
-			 * cycle and this instance can never get freed. If UNIX
-			 * is enabled we'll handle it just fine, but there's
-			 * still no point in allowing a ring fd as it doesn't
-			 * support regular read/write anyway.
+			 * Don't allow io_uring instances to be registered.
 			 */
 			if (io_is_uring_fops(file)) {
 				fput(file);
 				err = -EBADF;
 				break;
 			}
-			err = io_scm_file_account(ctx, file);
-			if (err) {
-				fput(file);
-				break;
-			}
 			*io_get_tag_slot(data, i) = tag;
 			io_fixed_file_set(file_slot, file);
 			io_file_bitmap_set(&ctx->file_table, i);
@@ -675,22 +664,12 @@ void __io_sqe_files_unregister(struct io_ring_ctx *ctx)
 	for (i = 0; i < ctx->nr_user_files; i++) {
 		struct file *file = io_file_from_index(&ctx->file_table, i);
 
-		/* skip scm accounted files, they'll be freed by ->ring_sock */
-		if (!file || io_file_need_scm(file))
+		if (!file)
 			continue;
 		io_file_bitmap_clear(&ctx->file_table, i);
 		fput(file);
 	}
 
-#if defined(CONFIG_UNIX)
-	if (ctx->ring_sock) {
-		struct sock *sock = ctx->ring_sock->sk;
-		struct sk_buff *skb;
-
-		while ((skb = skb_dequeue(&sock->sk_receive_queue)) != NULL)
-			kfree_skb(skb);
-	}
-#endif
 	io_free_file_tables(&ctx->file_table);
 	io_file_table_set_alloc_range(ctx, 0, 0);
 	io_rsrc_data_free(ctx->file_data);
@@ -718,137 +697,6 @@ int io_sqe_files_unregister(struct io_ring_ctx *ctx)
 	return ret;
 }
 
-/*
- * Ensure the UNIX gc is aware of our file set, so we are certain that
- * the io_uring can be safely unregistered on process exit, even if we have
- * loops in the file referencing. We account only files that can hold other
- * files because otherwise they can't form a loop and so are not interesting
- * for GC.
- */
-int __io_scm_file_account(struct io_ring_ctx *ctx, struct file *file)
-{
-#if defined(CONFIG_UNIX)
-	struct sock *sk = ctx->ring_sock->sk;
-	struct sk_buff_head *head = &sk->sk_receive_queue;
-	struct scm_fp_list *fpl;
-	struct sk_buff *skb;
-
-	if (likely(!io_file_need_scm(file)))
-		return 0;
-
-	/*
-	 * See if we can merge this file into an existing skb SCM_RIGHTS
-	 * file set. If there's no room, fall back to allocating a new skb
-	 * and filling it in.
-	 */
-	spin_lock_irq(&head->lock);
-	skb = skb_peek(head);
-	if (skb && UNIXCB(skb).fp->count < SCM_MAX_FD)
-		__skb_unlink(skb, head);
-	else
-		skb = NULL;
-	spin_unlock_irq(&head->lock);
-
-	if (!skb) {
-		fpl = kzalloc(sizeof(*fpl), GFP_KERNEL);
-		if (!fpl)
-			return -ENOMEM;
-
-		skb = alloc_skb(0, GFP_KERNEL);
-		if (!skb) {
-			kfree(fpl);
-			return -ENOMEM;
-		}
-
-		fpl->user = get_uid(current_user());
-		fpl->max = SCM_MAX_FD;
-		fpl->count = 0;
-
-		UNIXCB(skb).fp = fpl;
-		skb->sk = sk;
-		skb->destructor = io_uring_destruct_scm;
-		refcount_add(skb->truesize, &sk->sk_wmem_alloc);
-	}
-
-	fpl = UNIXCB(skb).fp;
-	fpl->fp[fpl->count++] = get_file(file);
-	unix_inflight(fpl->user, file);
-	skb_queue_head(head, skb);
-	fput(file);
-#endif
-	return 0;
-}
-
-static __cold void io_rsrc_file_scm_put(struct io_ring_ctx *ctx, struct file *file)
-{
-#if defined(CONFIG_UNIX)
-	struct sock *sock = ctx->ring_sock->sk;
-	struct sk_buff_head list, *head = &sock->sk_receive_queue;
-	struct sk_buff *skb;
-	int i;
-
-	__skb_queue_head_init(&list);
-
-	/*
-	 * Find the skb that holds this file in its SCM_RIGHTS. When found,
-	 * remove this entry and rearrange the file array.
-	 */
-	skb = skb_dequeue(head);
-	while (skb) {
-		struct scm_fp_list *fp;
-
-		fp = UNIXCB(skb).fp;
-		for (i = 0; i < fp->count; i++) {
-			int left;
-
-			if (fp->fp[i] != file)
-				continue;
-
-			unix_notinflight(fp->user, fp->fp[i]);
-			left = fp->count - 1 - i;
-			if (left) {
-				memmove(&fp->fp[i], &fp->fp[i + 1],
-						left * sizeof(struct file *));
-			}
-			fp->count--;
-			if (!fp->count) {
-				kfree_skb(skb);
-				skb = NULL;
-			} else {
-				__skb_queue_tail(&list, skb);
-			}
-			fput(file);
-			file = NULL;
-			break;
-		}
-
-		if (!file)
-			break;
-
-		__skb_queue_tail(&list, skb);
-
-		skb = skb_dequeue(head);
-	}
-
-	if (skb_peek(&list)) {
-		spin_lock_irq(&head->lock);
-		while ((skb = __skb_dequeue(&list)) != NULL)
-			__skb_queue_tail(head, skb);
-		spin_unlock_irq(&head->lock);
-	}
-#endif
-}
-
-static void io_rsrc_file_put(struct io_ring_ctx *ctx, struct io_rsrc_put *prsrc)
-{
-	struct file *file = prsrc->file;
-
-	if (likely(!io_file_need_scm(file)))
-		fput(file);
-	else
-		io_rsrc_file_scm_put(ctx, file);
-}
-
 int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 			  unsigned nr_args, u64 __user *tags)
 {
@@ -897,21 +745,12 @@ int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 			goto fail;
 
 		/*
-		 * Don't allow io_uring instances to be registered. If UNIX
-		 * isn't enabled, then this causes a reference cycle and this
-		 * instance can never get freed. If UNIX is enabled we'll
-		 * handle it just fine, but there's still no point in allowing
-		 * a ring fd as it doesn't support regular read/write anyway.
+		 * Don't allow io_uring instances to be registered.
 		 */
 		if (io_is_uring_fops(file)) {
 			fput(file);
 			goto fail;
 		}
-		ret = io_scm_file_account(ctx, file);
-		if (ret) {
-			fput(file);
-			goto fail;
-		}
 		file_slot = io_fixed_file_slot(&ctx->file_table, i);
 		io_fixed_file_set(file_slot, file);
 		io_file_bitmap_set(&ctx->file_table, i);
diff --git a/io_uring/rsrc.h b/io_uring/rsrc.h
index 08ac0d8e07ef8..7238b9cfe33b6 100644
--- a/io_uring/rsrc.h
+++ b/io_uring/rsrc.h
@@ -75,21 +75,6 @@ int io_sqe_files_unregister(struct io_ring_ctx *ctx);
 int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 			  unsigned nr_args, u64 __user *tags);
 
-int __io_scm_file_account(struct io_ring_ctx *ctx, struct file *file);
-
-static inline bool io_file_need_scm(struct file *filp)
-{
-	return false;
-}
-
-static inline int io_scm_file_account(struct io_ring_ctx *ctx,
-				      struct file *file)
-{
-	if (likely(!io_file_need_scm(file)))
-		return 0;
-	return __io_scm_file_account(ctx, file);
-}
-
 int io_register_files_update(struct io_ring_ctx *ctx, void __user *arg,
 			     unsigned nr_args);
 int io_register_rsrc_update(struct io_ring_ctx *ctx, void __user *arg,
-- 
2.43.0

[PATCH 6.7 004/713] soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free

[Sasha Levin]

From: Johan Hovold <johan+linaro@kernel.org>

commit b979f2d50a099f3402418d7ff5f26c3952fb08bb upstream.

A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.

This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.

Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.

In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.

When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:

	dp -> aux -> dp-hpd (freed)

which may, for example, result in the freed bridge failing to attach:

	[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16

or a NULL-pointer dereference:

	Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
	...
	Call trace:
	  drm_bridge_attach+0x70/0x1a8 [drm]
	  drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
	  drm_bridge_attach+0x80/0x1a8 [drm]
	  dp_bridge_init+0xa8/0x15c [msm]
	  msm_dp_modeset_init+0x28/0xc4 [msm]

The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.

Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")).

[DB: slightly fixed commit message by adding the word 'commit']
Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Fixes: 2bcca96abfbf ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE")
Cc: <stable@vger.kernel.org>      # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-4-johan+linaro@kernel.org
[ johan: backport to 6.7 which does not have DRM aux bridge ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/pmic_glink_altmode.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
index 7ee52cf2570fa..ca58bfa41846c 100644
--- a/drivers/soc/qcom/pmic_glink_altmode.c
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -469,12 +469,6 @@ static int pmic_glink_altmode_probe(struct auxiliary_device *adev,
 		alt_port->bridge.ops = DRM_BRIDGE_OP_HPD;
 		alt_port->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
 
-		ret = devm_drm_bridge_add(dev, &alt_port->bridge);
-		if (ret) {
-			fwnode_handle_put(fwnode);
-			return ret;
-		}
-
 		alt_port->dp_alt.svid = USB_TYPEC_DP_SID;
 		alt_port->dp_alt.mode = USB_TYPEC_DP_MODE;
 		alt_port->dp_alt.active = 1;
@@ -525,6 +519,16 @@ static int pmic_glink_altmode_probe(struct auxiliary_device *adev,
 		}
 	}
 
+	for (port = 0; port < ARRAY_SIZE(altmode->ports); port++) {
+		alt_port = &altmode->ports[port];
+		if (!alt_port->altmode)
+			continue;
+
+		ret = devm_drm_bridge_add(dev, &alt_port->bridge);
+		if (ret)
+			return ret;
+	}
+
 	altmode->client = devm_pmic_glink_register_client(dev,
 							  altmode->owner_id,
 							  pmic_glink_altmode_callback,
-- 
2.43.0

[PATCH 6.7 005/713] media: rkisp1: Fix IRQ handling due to shared interrupts

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

[ Upstream commit ffb635bb398fc07cb38f8a7b4a82cbe5f412f08e ]

The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers can be called at any time. If such a call happens while the ISP
is powered down, the SoC will hang as the driver tries to access the
ISP registers.

This can be reproduced even without the platform sharing the IRQ line:
Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will
hang.

Fix this by adding a new field, 'irqs_enabled', which is used to bail
out from the interrupt handler when the ISP is not operational.

Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-2-173007628248@ideasonboard.com

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/rockchip/rkisp1/rkisp1-capture.c |  3 +++
 .../platform/rockchip/rkisp1/rkisp1-common.h  |  2 ++
 .../platform/rockchip/rkisp1/rkisp1-csi.c     |  3 +++
 .../platform/rockchip/rkisp1/rkisp1-dev.c     | 22 +++++++++++++++++++
 .../platform/rockchip/rkisp1/rkisp1-isp.c     |  3 +++
 5 files changed, 33 insertions(+)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
index c6d7e01c89494..3752b702e270b 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
@@ -725,6 +725,9 @@ irqreturn_t rkisp1_capture_isr(int irq, void *ctx)
 	unsigned int i;
 	u32 status;
 
+	if (!rkisp1->irqs_enabled)
+		return IRQ_NONE;
+
 	status = rkisp1_read(rkisp1, RKISP1_CIF_MI_MIS);
 	if (!status)
 		return IRQ_NONE;
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
index 2d7f06281c390..a4e272adc1ad0 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
@@ -449,6 +449,7 @@ struct rkisp1_debug {
  * @debug:	   debug params to be exposed on debugfs
  * @info:	   version-specific ISP information
  * @irqs:          IRQ line numbers
+ * @irqs_enabled:  the hardware is enabled and can cause interrupts
  */
 struct rkisp1_device {
 	void __iomem *base_addr;
@@ -470,6 +471,7 @@ struct rkisp1_device {
 	struct rkisp1_debug debug;
 	const struct rkisp1_info *info;
 	int irqs[RKISP1_NUM_IRQS];
+	bool irqs_enabled;
 };
 
 /*
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
index 702adee83322b..7320c1c72e688 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
@@ -196,6 +196,9 @@ irqreturn_t rkisp1_csi_isr(int irq, void *ctx)
 	struct rkisp1_device *rkisp1 = dev_get_drvdata(dev);
 	u32 val, status;
 
+	if (!rkisp1->irqs_enabled)
+		return IRQ_NONE;
+
 	status = rkisp1_read(rkisp1, RKISP1_CIF_MIPI_MIS);
 	if (!status)
 		return IRQ_NONE;
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
index acc559652d6eb..73cf08a740118 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c
@@ -305,6 +305,24 @@ static int __maybe_unused rkisp1_runtime_suspend(struct device *dev)
 {
 	struct rkisp1_device *rkisp1 = dev_get_drvdata(dev);
 
+	rkisp1->irqs_enabled = false;
+	/* Make sure the IRQ handler will see the above */
+	mb();
+
+	/*
+	 * Wait until any running IRQ handler has returned. The IRQ handler
+	 * may get called even after this (as it's a shared interrupt line)
+	 * but the 'irqs_enabled' flag will make the handler return immediately.
+	 */
+	for (unsigned int il = 0; il < ARRAY_SIZE(rkisp1->irqs); ++il) {
+		if (rkisp1->irqs[il] == -1)
+			continue;
+
+		/* Skip if the irq line is the same as previous */
+		if (il == 0 || rkisp1->irqs[il - 1] != rkisp1->irqs[il])
+			synchronize_irq(rkisp1->irqs[il]);
+	}
+
 	clk_bulk_disable_unprepare(rkisp1->clk_size, rkisp1->clks);
 	return pinctrl_pm_select_sleep_state(dev);
 }
@@ -321,6 +339,10 @@ static int __maybe_unused rkisp1_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	rkisp1->irqs_enabled = true;
+	/* Make sure the IRQ handler will see the above */
+	mb();
+
 	return 0;
 }
 
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index 5fbc47bda6831..caffea6a46186 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -971,6 +971,9 @@ irqreturn_t rkisp1_isp_isr(int irq, void *ctx)
 	struct rkisp1_device *rkisp1 = dev_get_drvdata(dev);
 	u32 status, isp_err;
 
+	if (!rkisp1->irqs_enabled)
+		return IRQ_NONE;
+
 	status = rkisp1_read(rkisp1, RKISP1_CIF_ISP_MIS);
 	if (!status)
 		return IRQ_NONE;
-- 
2.43.0

[PATCH 6.7 006/713] HID: logitech-hidpp: Do not flood kernel log

[Sasha Levin]

From: Oleksandr Natalenko <oleksandr@natalenko.name>

[ Upstream commit 411a20db905b44e18cc9129b745f1d5deba4eae5 ]

Since commit 680ee411a98e ("HID: logitech-hidpp: Fix connect event race")
the following messages appear in the kernel log from time to time:

logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:4051.0006: Disconnected
logitech-hidpp-device 0003:046D:408A.0005: Disconnected

As discussed, print the first per-device "device connected" message
at info level, demoting subsequent messages to debug level. Also,
demote the "Disconnected message" to debug level unconditionally.

Link: https://lore.kernel.org/lkml/3277085.44csPzL39Z@natalenko.name/
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 6ef0c88e3e60a..d2f3f234f29de 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -203,6 +203,8 @@ struct hidpp_device {
 	struct hidpp_scroll_counter vertical_wheel_counter;
 
 	u8 wireless_feature_index;
+
+	bool connected_once;
 };
 
 /* HID++ 1.0 error codes */
@@ -988,8 +990,13 @@ static int hidpp_root_get_protocol_version(struct hidpp_device *hidpp)
 	hidpp->protocol_minor = response.rap.params[1];
 
 print_version:
-	hid_info(hidpp->hid_dev, "HID++ %u.%u device connected.\n",
-		 hidpp->protocol_major, hidpp->protocol_minor);
+	if (!hidpp->connected_once) {
+		hid_info(hidpp->hid_dev, "HID++ %u.%u device connected.\n",
+			 hidpp->protocol_major, hidpp->protocol_minor);
+		hidpp->connected_once = true;
+	} else
+		hid_dbg(hidpp->hid_dev, "HID++ %u.%u device connected.\n",
+			 hidpp->protocol_major, hidpp->protocol_minor);
 	return 0;
 }
 
@@ -4184,7 +4191,7 @@ static void hidpp_connect_event(struct work_struct *work)
 	/* Get device version to check if it is connected */
 	ret = hidpp_root_get_protocol_version(hidpp);
 	if (ret) {
-		hid_info(hidpp->hid_dev, "Disconnected\n");
+		hid_dbg(hidpp->hid_dev, "Disconnected\n");
 		if (hidpp->battery.ps) {
 			hidpp->battery.online = false;
 			hidpp->battery.status = POWER_SUPPLY_STATUS_UNKNOWN;
-- 
2.43.0

[PATCH 6.7 007/713] ASoC: cs42l43: Handle error from devm_pm_runtime_enable

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit d1722057477a3786b8c0d60c28fc281f6ecf1cc3 ]

As devm_pm_runtime_enable can fail due to memory allocations, it is
best to handle the error.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l43.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c
index d62c9f26c6325..5009cf64124ed 100644
--- a/sound/soc/codecs/cs42l43.c
+++ b/sound/soc/codecs/cs42l43.c
@@ -2175,7 +2175,10 @@ static int cs42l43_codec_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(priv->dev);
 	pm_runtime_set_active(priv->dev);
 	pm_runtime_get_noresume(priv->dev);
-	devm_pm_runtime_enable(priv->dev);
+
+	ret = devm_pm_runtime_enable(priv->dev);
+	if (ret)
+		goto err_pm;
 
 	for (i = 0; i < ARRAY_SIZE(cs42l43_irqs); i++) {
 		ret = cs42l43_request_irq(priv, dom, cs42l43_irqs[i].name,
-- 
2.43.0

[PATCH 6.7 008/713] wifi: iwlwifi: mvm: use correct address 3 in A-MSDU

[Sasha Levin]

From: Daniel Gabay <daniel.gabay@intel.com>

[ Upstream commit 2e57b77583ca34fdb6e14f253172636c52f81cf2 ]

As described in IEEE sta 802.11-2020, table 9-30 (Address
field contents), A-MSDU address 3 should contain the BSSID
address.

In TX_CMD we copy the MAC header from skb, and skb address 3
holds the destination address, but it may not be identical to
the BSSID.

Using the wrong destination address appears to work with (most)
receivers without MLO, but in MLO some devices are checking for
it carefully, perhaps as a consequence of link to MLD address
translation.

Replace address 3 in the TX_CMD MAC header with the correct
address while retaining the skb address 3 unchanged.
This ensures that skb address 3 will be utilized later for
constructing the A-MSDU subframes.

Note that we fill in the MLD address, but the firmware will do the
necessary translation to link address after encryption.

Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.4583a1bf9188.I3f8e7892bdf8f86b4daa28453771a8c9817b2416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 69 ++++++++++++++++++---
 1 file changed, 59 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index db986bfc4dc3f..461f26d9214e4 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -520,13 +520,24 @@ static void iwl_mvm_set_tx_cmd_crypto(struct iwl_mvm *mvm,
 	}
 }
 
+static void iwl_mvm_copy_hdr(void *cmd, const void *hdr, int hdrlen,
+			     const u8 *addr3_override)
+{
+	struct ieee80211_hdr *out_hdr = cmd;
+
+	memcpy(cmd, hdr, hdrlen);
+	if (addr3_override)
+		memcpy(out_hdr->addr3, addr3_override, ETH_ALEN);
+}
+
 /*
  * Allocates and sets the Tx cmd the driver data pointers in the skb
  */
 static struct iwl_device_tx_cmd *
 iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb,
 		      struct ieee80211_tx_info *info, int hdrlen,
-		      struct ieee80211_sta *sta, u8 sta_id)
+		      struct ieee80211_sta *sta, u8 sta_id,
+		      const u8 *addr3_override)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct iwl_device_tx_cmd *dev_cmd;
@@ -584,7 +595,7 @@ iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb,
 			cmd->len = cpu_to_le16((u16)skb->len);
 
 			/* Copy MAC header from skb into command buffer */
-			memcpy(cmd->hdr, hdr, hdrlen);
+			iwl_mvm_copy_hdr(cmd->hdr, hdr, hdrlen, addr3_override);
 
 			cmd->flags = cpu_to_le16(flags);
 			cmd->rate_n_flags = cpu_to_le32(rate_n_flags);
@@ -599,7 +610,7 @@ iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb,
 			cmd->len = cpu_to_le16((u16)skb->len);
 
 			/* Copy MAC header from skb into command buffer */
-			memcpy(cmd->hdr, hdr, hdrlen);
+			iwl_mvm_copy_hdr(cmd->hdr, hdr, hdrlen, addr3_override);
 
 			cmd->flags = cpu_to_le32(flags);
 			cmd->rate_n_flags = cpu_to_le32(rate_n_flags);
@@ -617,7 +628,7 @@ iwl_mvm_set_tx_params(struct iwl_mvm *mvm, struct sk_buff *skb,
 	iwl_mvm_set_tx_cmd_rate(mvm, tx_cmd, info, sta, hdr->frame_control);
 
 	/* Copy MAC header from skb into command buffer */
-	memcpy(tx_cmd->hdr, hdr, hdrlen);
+	iwl_mvm_copy_hdr(tx_cmd->hdr, hdr, hdrlen, addr3_override);
 
 out:
 	return dev_cmd;
@@ -820,7 +831,8 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb)
 
 	IWL_DEBUG_TX(mvm, "station Id %d, queue=%d\n", sta_id, queue);
 
-	dev_cmd = iwl_mvm_set_tx_params(mvm, skb, &info, hdrlen, NULL, sta_id);
+	dev_cmd = iwl_mvm_set_tx_params(mvm, skb, &info, hdrlen, NULL, sta_id,
+					NULL);
 	if (!dev_cmd)
 		return -1;
 
@@ -1140,7 +1152,8 @@ static int iwl_mvm_tx_pkt_queued(struct iwl_mvm *mvm,
  */
 static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb,
 			   struct ieee80211_tx_info *info,
-			   struct ieee80211_sta *sta)
+			   struct ieee80211_sta *sta,
+			   const u8 *addr3_override)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct iwl_mvm_sta *mvmsta;
@@ -1172,7 +1185,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb,
 		iwl_mvm_probe_resp_set_noa(mvm, skb);
 
 	dev_cmd = iwl_mvm_set_tx_params(mvm, skb, info, hdrlen,
-					sta, mvmsta->deflink.sta_id);
+					sta, mvmsta->deflink.sta_id,
+					addr3_override);
 	if (!dev_cmd)
 		goto drop;
 
@@ -1294,9 +1308,11 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
 	struct ieee80211_tx_info info;
 	struct sk_buff_head mpdus_skbs;
+	struct ieee80211_vif *vif;
 	unsigned int payload_len;
 	int ret;
 	struct sk_buff *orig_skb = skb;
+	const u8 *addr3;
 
 	if (WARN_ON_ONCE(!mvmsta))
 		return -1;
@@ -1307,26 +1323,59 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
 	memcpy(&info, skb->cb, sizeof(info));
 
 	if (!skb_is_gso(skb))
-		return iwl_mvm_tx_mpdu(mvm, skb, &info, sta);
+		return iwl_mvm_tx_mpdu(mvm, skb, &info, sta, NULL);
 
 	payload_len = skb_tail_pointer(skb) - skb_transport_header(skb) -
 		tcp_hdrlen(skb) + skb->data_len;
 
 	if (payload_len <= skb_shinfo(skb)->gso_size)
-		return iwl_mvm_tx_mpdu(mvm, skb, &info, sta);
+		return iwl_mvm_tx_mpdu(mvm, skb, &info, sta, NULL);
 
 	__skb_queue_head_init(&mpdus_skbs);
 
+	vif = info.control.vif;
+	if (!vif)
+		return -1;
+
 	ret = iwl_mvm_tx_tso(mvm, skb, &info, sta, &mpdus_skbs);
 	if (ret)
 		return ret;
 
 	WARN_ON(skb_queue_empty(&mpdus_skbs));
 
+	/*
+	 * As described in IEEE sta 802.11-2020, table 9-30 (Address
+	 * field contents), A-MSDU address 3 should contain the BSSID
+	 * address.
+	 * Pass address 3 down to iwl_mvm_tx_mpdu() and further to set it
+	 * in the command header. We need to preserve the original
+	 * address 3 in the skb header to correctly create all the
+	 * A-MSDU subframe headers from it.
+	 */
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		addr3 = vif->cfg.ap_addr;
+		break;
+	case NL80211_IFTYPE_AP:
+		addr3 = vif->addr;
+		break;
+	default:
+		addr3 = NULL;
+		break;
+	}
+
 	while (!skb_queue_empty(&mpdus_skbs)) {
+		struct ieee80211_hdr *hdr;
+		bool amsdu;
+
 		skb = __skb_dequeue(&mpdus_skbs);
+		hdr = (void *)skb->data;
+		amsdu = ieee80211_is_data_qos(hdr->frame_control) &&
+			(*ieee80211_get_qos_ctl(hdr) &
+			 IEEE80211_QOS_CTL_A_MSDU_PRESENT);
 
-		ret = iwl_mvm_tx_mpdu(mvm, skb, &info, sta);
+		ret = iwl_mvm_tx_mpdu(mvm, skb, &info, sta,
+				      amsdu ? addr3 : NULL);
 		if (ret) {
 			/* Free skbs created as part of TSO logic that have not yet been dequeued */
 			__skb_queue_purge(&mpdus_skbs);
-- 
2.43.0

[PATCH 6.7 009/713] perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)

[Sasha Levin]

From: Ilkka Koskinen <ilkka@os.amperecomputing.com>

[ Upstream commit 50572064ec7109b00eef8880e905f55861c8b3de ]

AmpereOneX mesh implementation has a bug in HN-P nodes that makes them
report incorrect child count. The failing crosspoints report 8 children
while they only have two.

When the driver tries to access the inexistent child nodes, it believes it
has reached an invalid node type and probing fails. The workaround is to
ignore those incorrect child nodes and continue normally.

Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
[ rm: rewrote simpler generalised version ]
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ce4b1442135fe03d0de41859b04b268c88c854a3.1707498577.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm-cmn.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index c584165b13bab..7e3aa7e2345fa 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -2305,6 +2305,17 @@ static int arm_cmn_discover(struct arm_cmn *cmn, unsigned int rgn_offset)
 				dev_dbg(cmn->dev, "ignoring external node %llx\n", reg);
 				continue;
 			}
+			/*
+			 * AmpereOneX erratum AC04_MESH_1 makes some XPs report a bogus
+			 * child count larger than the number of valid child pointers.
+			 * A child offset of 0 can only occur on CMN-600; otherwise it
+			 * would imply the root node being its own grandchild, which
+			 * we can safely dismiss in general.
+			 */
+			if (reg == 0 && cmn->part != PART_CMN600) {
+				dev_dbg(cmn->dev, "bogus child pointer?\n");
+				continue;
+			}
 
 			arm_cmn_init_node_info(cmn, reg & CMN_CHILD_NODE_ADDR, dn);
 
-- 
2.43.0

[PATCH 6.7 010/713] selftests: openvswitch: Add validation for the recursion test

[Sasha Levin]

From: Aaron Conole <aconole@redhat.com>

[ Upstream commit bd128f62c365504e1268dc09fcccdfb1f091e93a ]

Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16.  Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.

Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/net/openvswitch/openvswitch.sh  | 13 ++++
 .../selftests/net/openvswitch/ovs-dpctl.py    | 71 +++++++++++++++----
 2 files changed, 69 insertions(+), 15 deletions(-)

diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
index f8499d4c87f3f..36e40256ab92a 100755
--- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
+++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
@@ -502,7 +502,20 @@ test_netlink_checks () {
 	    wc -l) == 2 ] || \
 	      return 1
 
+	info "Checking clone depth"
 	ERR_MSG="Flow actions may not be safe on all matching packets"
+	PRE_TEST=$(dmesg | grep -c "${ERR_MSG}")
+	ovs_add_flow "test_netlink_checks" nv0 \
+		'in_port(1),eth(),eth_type(0x800),ipv4()' \
+		'clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(clone(drop)))))))))))))))))' \
+		>/dev/null 2>&1 && return 1
+	POST_TEST=$(dmesg | grep -c "${ERR_MSG}")
+
+	if [ "$PRE_TEST" == "$POST_TEST" ]; then
+		info "failed - clone depth too large"
+		return 1
+	fi
+
 	PRE_TEST=$(dmesg | grep -c "${ERR_MSG}")
 	ovs_add_flow "test_netlink_checks" nv0 \
 		'in_port(1),eth(),eth_type(0x0806),arp()' 'drop(0),2' \
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
index b97e621face95..5e0e539a323d5 100644
--- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
+++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
@@ -299,7 +299,7 @@ class ovsactions(nla):
         ("OVS_ACTION_ATTR_PUSH_NSH", "none"),
         ("OVS_ACTION_ATTR_POP_NSH", "flag"),
         ("OVS_ACTION_ATTR_METER", "none"),
-        ("OVS_ACTION_ATTR_CLONE", "none"),
+        ("OVS_ACTION_ATTR_CLONE", "recursive"),
         ("OVS_ACTION_ATTR_CHECK_PKT_LEN", "none"),
         ("OVS_ACTION_ATTR_ADD_MPLS", "none"),
         ("OVS_ACTION_ATTR_DEC_TTL", "none"),
@@ -465,29 +465,42 @@ class ovsactions(nla):
                     print_str += "pop_mpls"
             else:
                 datum = self.get_attr(field[0])
-                print_str += datum.dpstr(more)
+                if field[0] == "OVS_ACTION_ATTR_CLONE":
+                    print_str += "clone("
+                    print_str += datum.dpstr(more)
+                    print_str += ")"
+                else:
+                    print_str += datum.dpstr(more)
 
         return print_str
 
     def parse(self, actstr):
+        totallen = len(actstr)
         while len(actstr) != 0:
             parsed = False
+            parencount = 0
             if actstr.startswith("drop"):
                 # If no reason is provided, the implicit drop is used (i.e no
                 # action). If some reason is given, an explicit action is used.
-                actstr, reason = parse_extract_field(
-                    actstr,
-                    "drop(",
-                    "([0-9]+)",
-                    lambda x: int(x, 0),
-                    False,
-                    None,
-                )
+                reason = None
+                if actstr.startswith("drop("):
+                    parencount += 1
+
+                    actstr, reason = parse_extract_field(
+                        actstr,
+                        "drop(",
+                        "([0-9]+)",
+                        lambda x: int(x, 0),
+                        False,
+                        None,
+                    )
+
                 if reason is not None:
                     self["attrs"].append(["OVS_ACTION_ATTR_DROP", reason])
                     parsed = True
                 else:
-                    return
+                    actstr = actstr[len("drop"): ]
+                    return (totallen - len(actstr))
 
             elif parse_starts_block(actstr, "^(\d+)", False, True):
                 actstr, output = parse_extract_field(
@@ -504,6 +517,7 @@ class ovsactions(nla):
                     False,
                     0,
                 )
+                parencount += 1
                 self["attrs"].append(["OVS_ACTION_ATTR_RECIRC", recircid])
                 parsed = True
 
@@ -516,12 +530,22 @@ class ovsactions(nla):
 
             for flat_act in parse_flat_map:
                 if parse_starts_block(actstr, flat_act[0], False):
-                    actstr += len(flat_act[0])
+                    actstr = actstr[len(flat_act[0]):]
                     self["attrs"].append([flat_act[1]])
                     actstr = actstr[strspn(actstr, ", ") :]
                     parsed = True
 
-            if parse_starts_block(actstr, "ct(", False):
+            if parse_starts_block(actstr, "clone(", False):
+                parencount += 1
+                subacts = ovsactions()
+                actstr = actstr[len("clone("):]
+                parsedLen = subacts.parse(actstr)
+                lst = []
+                self["attrs"].append(("OVS_ACTION_ATTR_CLONE", subacts))
+                actstr = actstr[parsedLen:]
+                parsed = True
+            elif parse_starts_block(actstr, "ct(", False):
+                parencount += 1
                 actstr = actstr[len("ct(") :]
                 ctact = ovsactions.ctact()
 
@@ -553,6 +577,7 @@ class ovsactions(nla):
                         natact = ovsactions.ctact.natattr()
 
                         if actstr.startswith("("):
+                            parencount += 1
                             t = None
                             actstr = actstr[1:]
                             if actstr.startswith("src"):
@@ -607,15 +632,29 @@ class ovsactions(nla):
                                     actstr = actstr[strspn(actstr, ", ") :]
 
                         ctact["attrs"].append(["OVS_CT_ATTR_NAT", natact])
-                        actstr = actstr[strspn(actstr, ",) ") :]
+                        actstr = actstr[strspn(actstr, ", ") :]
 
                 self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact])
                 parsed = True
 
-            actstr = actstr[strspn(actstr, "), ") :]
+            actstr = actstr[strspn(actstr, ", ") :]
+            while parencount > 0:
+                parencount -= 1
+                actstr = actstr[strspn(actstr, " "):]
+                if len(actstr) and actstr[0] != ")":
+                    raise ValueError("Action str: '%s' unbalanced" % actstr)
+                actstr = actstr[1:]
+
+            if len(actstr) and actstr[0] == ")":
+                return (totallen - len(actstr))
+
+            actstr = actstr[strspn(actstr, ", ") :]
+
             if not parsed:
                 raise ValueError("Action str: '%s' not supported" % actstr)
 
+        return (totallen - len(actstr))
+
 
 class ovskey(nla):
     nla_flags = NLA_F_NESTED
@@ -2111,6 +2150,8 @@ def main(argv):
     ovsflow = OvsFlow()
     ndb = NDB()
 
+    sys.setrecursionlimit(100000)
+
     if hasattr(args, "showdp"):
         found = False
         for iface in ndb.interfaces:
-- 
2.43.0

[PATCH 6.7 011/713] selftests: tls: use exact comparison in recv_partial

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 49d821064c44cb5ffdf272905236012ea9ce50e3 ]

This exact case was fail for async crypto and we weren't
catching it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/tls.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 464853a7f9829..ad993ab3ac181 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -988,12 +988,12 @@ TEST_F(tls, recv_partial)
 
 	memset(recv_mem, 0, sizeof(recv_mem));
 	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
-	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_first),
-		       MSG_WAITALL), -1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, strlen(test_str_first),
+		       MSG_WAITALL), strlen(test_str_first));
 	EXPECT_EQ(memcmp(test_str_first, recv_mem, strlen(test_str_first)), 0);
 	memset(recv_mem, 0, sizeof(recv_mem));
-	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_second),
-		       MSG_WAITALL), -1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, strlen(test_str_second),
+		       MSG_WAITALL), strlen(test_str_second));
 	EXPECT_EQ(memcmp(test_str_second, recv_mem, strlen(test_str_second)),
 		  0);
 }
-- 
2.43.0

[PATCH 6.7 012/713] ASoC: rt5645: Make LattePanda board DMI match more precise

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 551539a8606e28cb2a130f8ef3e9834235b456c4 ]

The DMI strings used for the LattePanda board DMI quirks are very generic.

Using the dmidecode database from https://linux-hardware.org/ shows
that the chosen DMI strings also match the following 2 laptops
which also have a rt5645 codec:

Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04
Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934

All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS
version DMI strings:

DF-BI-7-S70CR100-*
DF-BI-7-S70CR110-*
DF-BI-7-S70CR200-*
LP-BS-7-S70CR700-*

See e.g. https://linux-hardware.org/?computer=D98250A817C0

Add a partial (non exact) DMI match on this string to make the LattePanda
board DMI match more precise to avoid false-positive matches.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index ea08b7cfc31da..e0da151508309 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3829,6 +3829,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
 		  DMI_EXACT_MATCH(DMI_BOARD_VERSION, "Default string"),
+		  /*
+		   * Above strings are too generic, LattePanda BIOS versions for
+		   * all 4 hw revisions are:
+		   * DF-BI-7-S70CR100-*
+		   * DF-BI-7-S70CR110-*
+		   * DF-BI-7-S70CR200-*
+		   * LP-BS-7-S70CR700-*
+		   * Do a partial match for S70CR to avoid false positive matches.
+		   */
+		  DMI_MATCH(DMI_BIOS_VERSION, "S70CR"),
 		},
 		.driver_data = (void *)&lattepanda_board_platform_data,
 	},
-- 
2.43.0

[PATCH 6.7 013/713] spi: intel-pci: Add support for Lunar Lake-M SPI serial flash

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 8f44e3808200c1434c26ef459722f88f48b306df ]

Add Intel Lunar Lake-M PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240212082027.2462849-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-intel-pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-intel-pci.c b/drivers/spi/spi-intel-pci.c
index 07d20ca1164c3..4337ca51d7aa2 100644
--- a/drivers/spi/spi-intel-pci.c
+++ b/drivers/spi/spi-intel-pci.c
@@ -85,6 +85,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0xa2a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0xa823), (unsigned long)&cnl_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
-- 
2.43.0

[PATCH 6.7 014/713] regmap: kunit: Ensure that changed bytes are actually different

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2f0dbb24f78a333433a2b875c0b76bf55c119cd4 ]

During the cache sync test we verify that values we expect to have been
written only to the cache do not appear in the hardware. This works most
of the time but since we randomly generate both the original and new values
there is a low probability that these values may actually be the same.
Wrap get_random_bytes() to ensure that the values are different, there
are other tests which should have similar verification that we actually
changed something.

While we're at it refactor the test to use three changed values rather
than attempting to use one of them twice, that just complicates checking
that our new values are actually new.

We use random generation to try to avoid data dependencies in the tests.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240211-regmap-kunit-random-change-v3-1-e387a9ea4468@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap-kunit.c | 54 +++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 16 deletions(-)

diff --git a/drivers/base/regmap/regmap-kunit.c b/drivers/base/regmap/regmap-kunit.c
index e14cc03a17f6c..4c9e38ead5c56 100644
--- a/drivers/base/regmap/regmap-kunit.c
+++ b/drivers/base/regmap/regmap-kunit.c
@@ -9,6 +9,23 @@
 
 #define BLOCK_TEST_SIZE 12
 
+static void get_changed_bytes(void *orig, void *new, size_t size)
+{
+	char *o = orig;
+	char *n = new;
+	int i;
+
+	get_random_bytes(new, size);
+
+	/*
+	 * This could be nicer and more efficient but we shouldn't
+	 * super care.
+	 */
+	for (i = 0; i < size; i++)
+		while (n[i] == o[i])
+			get_random_bytes(&n[i], 1);
+}
+
 static const struct regmap_config test_regmap_config = {
 	.max_register = BLOCK_TEST_SIZE,
 	.reg_stride = 1,
@@ -1192,7 +1209,7 @@ static void raw_sync(struct kunit *test)
 	struct regmap *map;
 	struct regmap_config config;
 	struct regmap_ram_data *data;
-	u16 val[2];
+	u16 val[3];
 	u16 *hw_buf;
 	unsigned int rval;
 	int i;
@@ -1206,17 +1223,13 @@ static void raw_sync(struct kunit *test)
 
 	hw_buf = (u16 *)data->vals;
 
-	get_random_bytes(&val, sizeof(val));
+	get_changed_bytes(&hw_buf[2], &val[0], sizeof(val));
 
 	/* Do a regular write and a raw write in cache only mode */
 	regcache_cache_only(map, true);
-	KUNIT_EXPECT_EQ(test, 0, regmap_raw_write(map, 2, val, sizeof(val)));
-	if (config.val_format_endian == REGMAP_ENDIAN_BIG)
-		KUNIT_EXPECT_EQ(test, 0, regmap_write(map, 6,
-						      be16_to_cpu(val[0])));
-	else
-		KUNIT_EXPECT_EQ(test, 0, regmap_write(map, 6,
-						      le16_to_cpu(val[0])));
+	KUNIT_EXPECT_EQ(test, 0, regmap_raw_write(map, 2, val,
+						  sizeof(u16) * 2));
+	KUNIT_EXPECT_EQ(test, 0, regmap_write(map, 4, val[2]));
 
 	/* We should read back the new values, and defaults for the rest */
 	for (i = 0; i < config.max_register + 1; i++) {
@@ -1225,24 +1238,34 @@ static void raw_sync(struct kunit *test)
 		switch (i) {
 		case 2:
 		case 3:
-		case 6:
 			if (config.val_format_endian == REGMAP_ENDIAN_BIG) {
 				KUNIT_EXPECT_EQ(test, rval,
-						be16_to_cpu(val[i % 2]));
+						be16_to_cpu(val[i - 2]));
 			} else {
 				KUNIT_EXPECT_EQ(test, rval,
-						le16_to_cpu(val[i % 2]));
+						le16_to_cpu(val[i - 2]));
 			}
 			break;
+		case 4:
+			KUNIT_EXPECT_EQ(test, rval, val[i - 2]);
+			break;
 		default:
 			KUNIT_EXPECT_EQ(test, config.reg_defaults[i].def, rval);
 			break;
 		}
 	}
+
+	/*
+	 * The value written via _write() was translated by the core,
+	 * translate the original copy for comparison purposes.
+	 */
+	if (config.val_format_endian == REGMAP_ENDIAN_BIG)
+		val[2] = cpu_to_be16(val[2]);
+	else
+		val[2] = cpu_to_le16(val[2]);
 	
 	/* The values should not appear in the "hardware" */
-	KUNIT_EXPECT_MEMNEQ(test, &hw_buf[2], val, sizeof(val));
-	KUNIT_EXPECT_MEMNEQ(test, &hw_buf[6], val, sizeof(u16));
+	KUNIT_EXPECT_MEMNEQ(test, &hw_buf[2], &val[0], sizeof(val));
 
 	for (i = 0; i < config.max_register + 1; i++)
 		data->written[i] = false;
@@ -1253,8 +1276,7 @@ static void raw_sync(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, 0, regcache_sync(map));
 
 	/* The values should now appear in the "hardware" */
-	KUNIT_EXPECT_MEMEQ(test, &hw_buf[2], val, sizeof(val));
-	KUNIT_EXPECT_MEMEQ(test, &hw_buf[6], val, sizeof(u16));
+	KUNIT_EXPECT_MEMEQ(test, &hw_buf[2], &val[0], sizeof(val));
 
 	regmap_exit(map);
 }
-- 
2.43.0

[PATCH 6.7 015/713] ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU

[Sasha Levin]

From: Attila Tőkés <attitokes@gmail.com>

[ Upstream commit f7fe85b229bc30cb5dc95b4e9015a601c9e3a8cd ]

Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7)
needs a quirk entry for the internal microphone to function.

Signed-off-by: Attila Tőkés <attitokes@gmail.com>
Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 80ad60d485ea0..cc231185d72c3 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -234,6 +234,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "82UG"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "82UU"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH 6.7 016/713] x86/xen: Add some null pointer checking to smp.c

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 3693bb4465e6e32a204a5b86d3ec7e6b9f7e67c2 ]

kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/smp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 4b0d6fff88de5..1fb9a1644d944 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -65,6 +65,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	if (!resched_name)
+		goto fail_mem;
 	per_cpu(xen_resched_irq, cpu).name = resched_name;
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
 				    cpu,
@@ -77,6 +79,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	per_cpu(xen_resched_irq, cpu).irq = rc;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
 	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
 				    cpu,
@@ -90,6 +94,9 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	if (!xen_fifo_events) {
 		debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+		if (!debug_name)
+			goto fail_mem;
+
 		per_cpu(xen_debug_irq, cpu).name = debug_name;
 		rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
 					     xen_debug_interrupt,
@@ -101,6 +108,9 @@ int xen_smp_intr_init(unsigned int cpu)
 	}
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
+
 	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
 				    cpu,
@@ -114,6 +124,8 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	return 0;
 
+ fail_mem:
+	rc = -ENOMEM;
  fail:
 	xen_smp_intr_free(cpu);
 	return rc;
-- 
2.43.0

[PATCH 6.7 017/713] MIPS: Clear Cause.BD in instruction_pointer_set

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit 9d6e21ddf20293b3880ae55b9d14de91c5891c59 ]

Clear Cause.BD after we use instruction_pointer_set to override
EPC.

This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/ptrace.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 701a233583c2c..d14d0e37ad02d 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
-- 
2.43.0

[PATCH 6.7 018/713] ceph: always queue a writeback when revoking the Fb caps

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit 902d6d013f75b68f31d208c6f3ff9cdca82648a7 ]

In case there is 'Fw' dirty caps and 'CHECK_CAPS_FLUSH' is set we
will always ignore queue a writeback. Queue a writeback is very
important because it will block kclient flushing the snapcaps to
MDS and which will block MDS waiting for revoking the 'Fb' caps.

Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/caps.c | 48 ++++++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index ad1f46c66fbff..bce3a840f15c2 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2156,6 +2156,30 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags)
 		      ceph_cap_string(cap->implemented),
 		      ceph_cap_string(revoking));
 
+		/* completed revocation? going down and there are no caps? */
+		if (revoking) {
+			if ((revoking & cap_used) == 0) {
+				doutc(cl, "completed revocation of %s\n",
+				      ceph_cap_string(cap->implemented & ~cap->issued));
+				goto ack;
+			}
+
+			/*
+			 * If the "i_wrbuffer_ref" was increased by mmap or generic
+			 * cache write just before the ceph_check_caps() is called,
+			 * the Fb capability revoking will fail this time. Then we
+			 * must wait for the BDI's delayed work to flush the dirty
+			 * pages and to release the "i_wrbuffer_ref", which will cost
+			 * at most 5 seconds. That means the MDS needs to wait at
+			 * most 5 seconds to finished the Fb capability's revocation.
+			 *
+			 * Let's queue a writeback for it.
+			 */
+			if (S_ISREG(inode->i_mode) && ci->i_wrbuffer_ref &&
+			    (revoking & CEPH_CAP_FILE_BUFFER))
+				queue_writeback = true;
+		}
+
 		if (cap == ci->i_auth_cap &&
 		    (cap->issued & CEPH_CAP_FILE_WR)) {
 			/* request larger max_size from MDS? */
@@ -2183,30 +2207,6 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags)
 			}
 		}
 
-		/* completed revocation? going down and there are no caps? */
-		if (revoking) {
-			if ((revoking & cap_used) == 0) {
-				doutc(cl, "completed revocation of %s\n",
-				      ceph_cap_string(cap->implemented & ~cap->issued));
-				goto ack;
-			}
-
-			/*
-			 * If the "i_wrbuffer_ref" was increased by mmap or generic
-			 * cache write just before the ceph_check_caps() is called,
-			 * the Fb capability revoking will fail this time. Then we
-			 * must wait for the BDI's delayed work to flush the dirty
-			 * pages and to release the "i_wrbuffer_ref", which will cost
-			 * at most 5 seconds. That means the MDS needs to wait at
-			 * most 5 seconds to finished the Fb capability's revocation.
-			 *
-			 * Let's queue a writeback for it.
-			 */
-			if (S_ISREG(inode->i_mode) && ci->i_wrbuffer_ref &&
-			    (revoking & CEPH_CAP_FILE_BUFFER))
-				queue_writeback = true;
-		}
-
 		/* want more caps from mds? */
 		if (want & ~cap->mds_wanted) {
 			if (want & ~(cap->mds_wanted | cap->issued))
-- 
2.43.0

[PATCH 6.7 019/713] ceph: add ceph_cap_unlink_work to fire check_caps() immediately

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit dbc347ef7f0c53aa4a5383238a804d7ebbb0b5ca ]

When unlinking a file the check caps could be delayed for more than
5 seconds, but in MDS side it maybe waiting for the clients to
release caps.

This will use the cap_wq work queue and a dedicated list to help
fire the check_caps() and dirty buffer flushing immediately.

Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/caps.c       | 17 +++++++++++++++-
 fs/ceph/mds_client.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
 fs/ceph/mds_client.h |  5 +++++
 3 files changed, 69 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index bce3a840f15c2..7fb4aae974124 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -4772,7 +4772,22 @@ int ceph_drop_caps_for_unlink(struct inode *inode)
 		if (__ceph_caps_dirty(ci)) {
 			struct ceph_mds_client *mdsc =
 				ceph_inode_to_fs_client(inode)->mdsc;
-			__cap_delay_requeue_front(mdsc, ci);
+
+			doutc(mdsc->fsc->client, "%p %llx.%llx\n", inode,
+			      ceph_vinop(inode));
+			spin_lock(&mdsc->cap_unlink_delay_lock);
+			ci->i_ceph_flags |= CEPH_I_FLUSH;
+			if (!list_empty(&ci->i_cap_delay_list))
+				list_del_init(&ci->i_cap_delay_list);
+			list_add_tail(&ci->i_cap_delay_list,
+				      &mdsc->cap_unlink_delay_list);
+			spin_unlock(&mdsc->cap_unlink_delay_lock);
+
+			/*
+			 * Fire the work immediately, because the MDS maybe
+			 * waiting for caps release.
+			 */
+			ceph_queue_cap_unlink_work(mdsc);
 		}
 	}
 	spin_unlock(&ci->i_ceph_lock);
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 2eb66dd7d01b2..950360b07536b 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2470,6 +2470,50 @@ void ceph_reclaim_caps_nr(struct ceph_mds_client *mdsc, int nr)
 	}
 }
 
+void ceph_queue_cap_unlink_work(struct ceph_mds_client *mdsc)
+{
+	struct ceph_client *cl = mdsc->fsc->client;
+	if (mdsc->stopping)
+		return;
+
+        if (queue_work(mdsc->fsc->cap_wq, &mdsc->cap_unlink_work)) {
+                doutc(cl, "caps unlink work queued\n");
+        } else {
+                doutc(cl, "failed to queue caps unlink work\n");
+        }
+}
+
+static void ceph_cap_unlink_work(struct work_struct *work)
+{
+	struct ceph_mds_client *mdsc =
+		container_of(work, struct ceph_mds_client, cap_unlink_work);
+	struct ceph_client *cl = mdsc->fsc->client;
+
+	doutc(cl, "begin\n");
+	spin_lock(&mdsc->cap_unlink_delay_lock);
+	while (!list_empty(&mdsc->cap_unlink_delay_list)) {
+		struct ceph_inode_info *ci;
+		struct inode *inode;
+
+		ci = list_first_entry(&mdsc->cap_unlink_delay_list,
+				      struct ceph_inode_info,
+				      i_cap_delay_list);
+		list_del_init(&ci->i_cap_delay_list);
+
+		inode = igrab(&ci->netfs.inode);
+		if (inode) {
+			spin_unlock(&mdsc->cap_unlink_delay_lock);
+			doutc(cl, "on %p %llx.%llx\n", inode,
+			      ceph_vinop(inode));
+			ceph_check_caps(ci, CHECK_CAPS_FLUSH);
+			iput(inode);
+			spin_lock(&mdsc->cap_unlink_delay_lock);
+		}
+	}
+	spin_unlock(&mdsc->cap_unlink_delay_lock);
+	doutc(cl, "done\n");
+}
+
 /*
  * requests
  */
@@ -5345,6 +5389,8 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 	INIT_LIST_HEAD(&mdsc->cap_delay_list);
 	INIT_LIST_HEAD(&mdsc->cap_wait_list);
 	spin_lock_init(&mdsc->cap_delay_lock);
+	INIT_LIST_HEAD(&mdsc->cap_unlink_delay_list);
+	spin_lock_init(&mdsc->cap_unlink_delay_lock);
 	INIT_LIST_HEAD(&mdsc->snap_flush_list);
 	spin_lock_init(&mdsc->snap_flush_lock);
 	mdsc->last_cap_flush_tid = 1;
@@ -5353,6 +5399,7 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 	spin_lock_init(&mdsc->cap_dirty_lock);
 	init_waitqueue_head(&mdsc->cap_flushing_wq);
 	INIT_WORK(&mdsc->cap_reclaim_work, ceph_cap_reclaim_work);
+	INIT_WORK(&mdsc->cap_unlink_work, ceph_cap_unlink_work);
 	err = ceph_metric_init(&mdsc->metric);
 	if (err)
 		goto err_mdsmap;
@@ -5626,6 +5673,7 @@ void ceph_mdsc_close_sessions(struct ceph_mds_client *mdsc)
 	ceph_cleanup_global_and_empty_realms(mdsc);
 
 	cancel_work_sync(&mdsc->cap_reclaim_work);
+	cancel_work_sync(&mdsc->cap_unlink_work);
 	cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */
 
 	doutc(cl, "done\n");
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 40560af388272..03f8ff00874f7 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -462,6 +462,8 @@ struct ceph_mds_client {
 	unsigned long    last_renew_caps;  /* last time we renewed our caps */
 	struct list_head cap_delay_list;   /* caps with delayed release */
 	spinlock_t       cap_delay_lock;   /* protects cap_delay_list */
+	struct list_head cap_unlink_delay_list;  /* caps with delayed release for unlink */
+	spinlock_t       cap_unlink_delay_lock;  /* protects cap_unlink_delay_list */
 	struct list_head snap_flush_list;  /* cap_snaps ready to flush */
 	spinlock_t       snap_flush_lock;
 
@@ -475,6 +477,8 @@ struct ceph_mds_client {
 	struct work_struct cap_reclaim_work;
 	atomic_t	   cap_reclaim_pending;
 
+	struct work_struct cap_unlink_work;
+
 	/*
 	 * Cap reservations
 	 *
@@ -574,6 +578,7 @@ extern void ceph_flush_cap_releases(struct ceph_mds_client *mdsc,
 				    struct ceph_mds_session *session);
 extern void ceph_queue_cap_reclaim_work(struct ceph_mds_client *mdsc);
 extern void ceph_reclaim_caps_nr(struct ceph_mds_client *mdsc, int nr);
+extern void ceph_queue_cap_unlink_work(struct ceph_mds_client *mdsc);
 extern int ceph_iterate_session_caps(struct ceph_mds_session *session,
 				     int (*cb)(struct inode *, int mds, void *),
 				     void *arg);
-- 
2.43.0

[PATCH 6.7 020/713] HID: multitouch: Add required quirk for Synaptics 0xcddc device

[Sasha Levin]

From: Manuel Fombuena <fombuena@outlook.com>

[ Upstream commit 1741a8269e1c51fa08d4bfdf34667387a6eb10ec ]

Add support for the pointing stick (Accupoint) and 2 mouse buttons.

Present on some Toshiba/dynabook Portege X30 and X40 laptops.

It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817

Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-multitouch.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index fd5b0637dad68..3e91e4d6ba6fa 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2151,6 +2151,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_SYNAPTICS, 0xcd7e) },
 
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_SYNAPTICS, 0xcddc) },
+
 	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_SYNAPTICS, 0xce08) },
-- 
2.43.0

[PATCH 6.7 021/713] ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>

[ Upstream commit c40aad7c81e5fba34b70123ed7ce3397fa62a4d2 ]

When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.

If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.

If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.

Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.

Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/ipc4-pcm.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c
index 39039a647cca3..ea70c0d7cf75a 100644
--- a/sound/soc/sof/ipc4-pcm.c
+++ b/sound/soc/sof/ipc4-pcm.c
@@ -413,7 +413,18 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component,
 	ret = sof_ipc4_set_multi_pipeline_state(sdev, state, trigger_list);
 	if (ret < 0) {
 		dev_err(sdev->dev, "failed to set final state %d for all pipelines\n", state);
-		goto free;
+		/*
+		 * workaround: if the firmware is crashed while setting the
+		 * pipelines to reset state we must ignore the error code and
+		 * reset it to 0.
+		 * Since the firmware is crashed we will not send IPC messages
+		 * and we are going to see errors printed, but the state of the
+		 * widgets will be correct for the next boot.
+		 */
+		if (sdev->fw_state != SOF_FW_CRASHED || state != SOF_IPC4_PIPE_RESET)
+			goto free;
+
+		ret = 0;
 	}
 
 	/* update RUNNING/RESET state for all pipelines that were just triggered */
-- 
2.43.0

[PATCH 6.7 022/713] ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD

[Sasha Levin]

From: Jean-Loïc Charroud <lagiraudiere+linux@free.fr>

[ Upstream commit 706c1fa1ab09f11a131fc4d699ce4c0224b1cb2d ]

Add the values for the missing DSD properties to the cs35l41 config table.

Signed-off-by: Jean-Loïc Charroud <lagiraudiere+linux@free.fr>
Link: https://lore.kernel.org/r/1435594585.650325975.1707867511062.JavaMail.zimbra@free.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index d74cf11eef1ea..6cf4c02f9effd 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -91,6 +91,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "10431D1F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431DA2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "10431E02", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
+	{ "10431E12", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
 	{ "10431EE2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 },
 	{ "10431F12", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
@@ -427,6 +428,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "10431D1F", generic_dsd_config },
 	{ "CSC3551", "10431DA2", generic_dsd_config },
 	{ "CSC3551", "10431E02", generic_dsd_config },
+	{ "CSC3551", "10431E12", generic_dsd_config },
 	{ "CSC3551", "10431EE2", generic_dsd_config },
 	{ "CSC3551", "10431F12", generic_dsd_config },
 	{ "CSC3551", "10431F1F", generic_dsd_config },
-- 
2.43.0

[PATCH 6.7 023/713] gen_compile_commands: fix invalid escape sequence warning

[Sasha Levin]

From: Andrew Ballance <andrewjballance@gmail.com>

[ Upstream commit dae4a0171e25884787da32823b3081b4c2acebb2 ]

With python 3.12, '\#' results in this warning
    SyntaxWarning: invalid escape sequence '\#'

Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/clang-tools/gen_compile_commands.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/clang-tools/gen_compile_commands.py b/scripts/clang-tools/gen_compile_commands.py
index 5dea4479240bc..e4fb686dfaa9f 100755
--- a/scripts/clang-tools/gen_compile_commands.py
+++ b/scripts/clang-tools/gen_compile_commands.py
@@ -170,7 +170,7 @@ def process_line(root_directory, command_prefix, file_path):
     # escape the pound sign '#', either as '\#' or '$(pound)' (depending on the
     # kernel version). The compile_commands.json file is not interepreted
     # by Make, so this code replaces the escaped version with '#'.
-    prefix = command_prefix.replace('\#', '#').replace('$(pound)', '#')
+    prefix = command_prefix.replace(r'\#', '#').replace('$(pound)', '#')
 
     # Return the canonical path, eliminating any symbolic links encountered in the path.
     abs_path = os.path.realpath(os.path.join(root_directory, file_path))
-- 
2.43.0

[PATCH 6.7 024/713] arm64/sve: Lower the maximum allocation for the SVE ptrace regset

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2813926261e436d33bc74486b51cce60b76edf78 ]

Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:

  chrome: page allocation failure: order:7,
          mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
          nodemask=(null),cpuset=urgent,mems_allowed=0
   ...
  regset_get_alloc+0x1c/0x28
  elf_core_dump+0x3d8/0xd8c
  do_coredump+0xeb8/0x1378

with further investigation showing that this is:

   [   66.957385] DOUG: Allocating 279584 bytes

which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.

The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.

Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.

We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.

Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213-arm64-sve-ptrace-regset-size-v2-1-c7600ca74b9b@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/fpsimd.h | 12 ++++++------
 arch/arm64/kernel/ptrace.c      |  3 ++-
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 7780d343ef080..b67b89c54e1c8 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -62,13 +62,13 @@ static inline void cpacr_restore(unsigned long cpacr)
  * When we defined the maximum SVE vector length we defined the ABI so
  * that the maximum vector length included all the reserved for future
  * expansion bits in ZCR rather than those just currently defined by
- * the architecture. While SME follows a similar pattern the fact that
- * it includes a square matrix means that any allocations that attempt
- * to cover the maximum potential vector length (such as happen with
- * the regset used for ptrace) end up being extremely large. Define
- * the much lower actual limit for use in such situations.
+ * the architecture.  Using this length to allocate worst size buffers
+ * results in excessively large allocations, and this effect is even
+ * more pronounced for SME due to ZA.  Define more suitable VLs for
+ * these situations.
  */
-#define SME_VQ_MAX	16
+#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
+#define SME_VQ_MAX	((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
 
 struct task_struct;
 
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index b3f64144b5cd9..c94c0f8c9a737 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1499,7 +1499,8 @@ static const struct user_regset aarch64_regsets[] = {
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
 		.core_note_type = NT_ARM_SVE,
-		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
+					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
 		.align = SVE_VQ_BYTES,
-- 
2.43.0

[PATCH 6.7 025/713] soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 6dd9a236042e305d7b69ee92db7347bf5943e7d3 ]

The symbol's prompt should be a one-line description, instead of just
duplicating the symbol name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/microchip/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/microchip/Kconfig b/drivers/soc/microchip/Kconfig
index eb656b33156ba..f19e74d342aa2 100644
--- a/drivers/soc/microchip/Kconfig
+++ b/drivers/soc/microchip/Kconfig
@@ -1,5 +1,5 @@
 config POLARFIRE_SOC_SYS_CTRL
-	tristate "POLARFIRE_SOC_SYS_CTRL"
+	tristate "Microchip PolarFire SoC (MPFS) system controller support"
 	depends on POLARFIRE_SOC_MAILBOX
 	help
 	  This driver adds support for the PolarFire SoC (MPFS) system controller.
-- 
2.43.0

[PATCH 6.7 026/713] arm64: dts: rockchip: mark system power controller on rk3588-evb1

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit fc4657971be31ae679e2bbeee2fb8e93a7a063eb ]

Mark the primary PMIC as system-power-controller, so that the
system properly shuts down on poweroff.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240117191555.86138-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index b9d789d57862c..bbbe00bcd14e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -351,6 +351,7 @@ pmic@0 {
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
-- 
2.43.0

[PATCH 6.7 027/713] RDMA/mlx5: Fix fortify source warning while accessing Eth segment

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ]

 ------------[ cut here ]------------
 memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
 WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
  [last unloaded: mlx_compat(OE)]
 CPU: 0 PID: 293779 Comm: ssh Tainted: G           OE      6.2.0-32-generic #32~22.04.1-Ubuntu
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
 FS:  00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? show_regs+0x72/0x90
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? __warn+0x8d/0x160
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? report_bug+0x1bb/0x1d0
  ? handle_bug+0x46/0x90
  ? exc_invalid_op+0x19/0x80
  ? asm_exc_invalid_op+0x1b/0x20
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
  ipoib_send+0x2ec/0x770 [ib_ipoib]
  ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
  dev_hard_start_xmit+0x8e/0x1e0
  ? validate_xmit_skb_list+0x4d/0x80
  sch_direct_xmit+0x116/0x3a0
  __dev_xmit_skb+0x1fd/0x580
  __dev_queue_xmit+0x284/0x6b0
  ? _raw_spin_unlock_irq+0xe/0x50
  ? __flush_work.isra.0+0x20d/0x370
  ? push_pseudo_header+0x17/0x40 [ib_ipoib]
  neigh_connected_output+0xcd/0x110
  ip_finish_output2+0x179/0x480
  ? __smp_call_single_queue+0x61/0xa0
  __ip_finish_output+0xc3/0x190
  ip_finish_output+0x2e/0xf0
  ip_output+0x78/0x110
  ? __pfx_ip_finish_output+0x10/0x10
  ip_local_out+0x64/0x70
  __ip_queue_xmit+0x18a/0x460
  ip_queue_xmit+0x15/0x30
  __tcp_transmit_skb+0x914/0x9c0
  tcp_write_xmit+0x334/0x8d0
  tcp_push_one+0x3c/0x60
  tcp_sendmsg_locked+0x2e1/0xac0
  tcp_sendmsg+0x2d/0x50
  inet_sendmsg+0x43/0x90
  sock_sendmsg+0x68/0x80
  sock_write_iter+0x93/0x100
  vfs_write+0x326/0x3c0
  ksys_write+0xbd/0xf0
  ? do_syscall_64+0x69/0x90
  __x64_sys_write+0x19/0x30
  do_syscall_64+0x59/0x90
  ? do_user_addr_fault+0x1d0/0x640
  ? exit_to_user_mode_prepare+0x3b/0xd0
  ? irqentry_exit_to_user_mode+0x9/0x20
  ? irqentry_exit+0x43/0x50
  ? exc_page_fault+0x92/0x1b0
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
 RIP: 0033:0x7fc03ad14a37
 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37
 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003
 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50
  </TASK>
 ---[ end trace 0000000000000000 ]---

Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/wr.c | 2 +-
 include/linux/mlx5/qp.h         | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/wr.c b/drivers/infiniband/hw/mlx5/wr.c
index df1d1b0a3ef72..9947feb7fb8a0 100644
--- a/drivers/infiniband/hw/mlx5/wr.c
+++ b/drivers/infiniband/hw/mlx5/wr.c
@@ -78,7 +78,7 @@ static void set_eth_seg(const struct ib_send_wr *wr, struct mlx5_ib_qp *qp,
 		 */
 		copysz = min_t(u64, *cur_edge - (void *)eseg->inline_hdr.start,
 			       left);
-		memcpy(eseg->inline_hdr.start, pdata, copysz);
+		memcpy(eseg->inline_hdr.data, pdata, copysz);
 		stride = ALIGN(sizeof(struct mlx5_wqe_eth_seg) -
 			       sizeof(eseg->inline_hdr.start) + copysz, 16);
 		*size += stride / 16;
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index bd53cf4be7bdc..f0e55bf3ec8b5 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -269,7 +269,10 @@ struct mlx5_wqe_eth_seg {
 	union {
 		struct {
 			__be16 sz;
-			u8     start[2];
+			union {
+				u8     start[2];
+				DECLARE_FLEX_ARRAY(u8, data);
+			};
 		} inline_hdr;
 		struct {
 			__be16 type;
-- 
2.43.0

[PATCH 6.7 028/713] RDMA/mlx5: Relax DEVX access upon modify commands

[Sasha Levin]

From: Yishai Hadas <yishaih@nvidia.com>

[ Upstream commit be551ee1574280ef8afbf7c271212ac3e38933ef ]

Relax DEVX access upon modify commands to be UVERBS_ACCESS_READ.

The kernel doesn't need to protect what firmware protects, or what
causes no damage to anyone but the user.

As firmware needs to protect itself from parallel access to the same
object, don't block parallel modify/query commands on the same object in
the kernel side.

This change will allow user space application to run parallel updates to
different entries in the same bulk object.

Tested-by: Tamar Mashiah <tmashiah@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7407d5ed35dc427c1097699e12b49c01e1073406.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/devx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index 8ba53edf23119..6e19974ecf6e7 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -2949,7 +2949,7 @@ DECLARE_UVERBS_NAMED_METHOD(
 	MLX5_IB_METHOD_DEVX_OBJ_MODIFY,
 	UVERBS_ATTR_IDR(MLX5_IB_ATTR_DEVX_OBJ_MODIFY_HANDLE,
 			UVERBS_IDR_ANY_OBJECT,
-			UVERBS_ACCESS_WRITE,
+			UVERBS_ACCESS_READ,
 			UA_MANDATORY),
 	UVERBS_ATTR_PTR_IN(
 		MLX5_IB_ATTR_DEVX_OBJ_MODIFY_CMD_IN,
-- 
2.43.0

[PATCH 6.7 029/713] ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit f98643d8daf3443e3b414a82d0cb3d745f8c8bbc ]

The binding doesn't define interrupts and adding such a definition was
refused because it's unclear how they should ever be used and the
relevant registers are outside the PWM range. So drop them fixing
several dtbs_check warnings like:

	arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240129113205.2453029-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a842..f3291f3bbc6fd 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@ spi: spi@10270000 {
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@ pwm4: pwm@10280000 {
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@ pwm5: pwm@10280010 {
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@ pwm6: pwm@10280020 {
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@ i2c0: i2c@20000000 {
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@ pwm0: pwm@20040000 {
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@ pwm1: pwm@20040010 {
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@ pwm2: pwm@20040020 {
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
-- 
2.43.0

[PATCH 6.7 030/713] bpf: Fix warning for bpf_cpumask in verifier

[Sasha Levin]

From: Hari Bathini <hbathini@linux.ibm.com>

[ Upstream commit 11f522256e9043b0fcd2f994278645d3e201d20c ]

Compiling with CONFIG_BPF_SYSCALL & !CONFIG_BPF_JIT throws the below
warning:

  "WARN: resolve_btfids: unresolved symbol bpf_cpumask"

Fix it by adding the appropriate #ifdef.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20240208100115.602172-1-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 9698e93d48c6e..890d4c4bf9972 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5445,7 +5445,9 @@ BTF_ID(struct, prog_test_ref_kfunc)
 #ifdef CONFIG_CGROUPS
 BTF_ID(struct, cgroup)
 #endif
+#ifdef CONFIG_BPF_JIT
 BTF_ID(struct, bpf_cpumask)
+#endif
 BTF_ID(struct, task_struct)
 BTF_SET_END(rcu_protected_types)
 
-- 
2.43.0

[PATCH 6.7 031/713] riscv: dts: sifive: add missing #interrupt-cells to pmic

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit ce6b6d1513965f500a05f3facf223fa01fd74920 ]

At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider

Add the missing property.

Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 07387f9c135ca..72b87b08ab444 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -123,6 +123,7 @@ pmic@58 {
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
-- 
2.43.0

[PATCH 6.7 032/713] x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit ee0e39a63b78849f8abbef268b13e4838569f646 ]

Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for
copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.

Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/vsyscall.h | 10 ++++++++++
 arch/x86/mm/fault.c             |  9 ---------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
index ab60a71a8dcb9..472f0263dbc61 100644
--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -4,6 +4,7 @@
 
 #include <linux/seqlock.h>
 #include <uapi/asm/vsyscall.h>
+#include <asm/page_types.h>
 
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
 extern void map_vsyscall(void);
@@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code,
 }
 #endif
 
+/*
+ * The (legacy) vsyscall page is the long page in the kernel portion
+ * of the address space that has user-accessible permissions.
+ */
+static inline bool is_vsyscall_vaddr(unsigned long vaddr)
+{
+	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
+}
+
 #endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 679b09cfe241c..d6375b3c633bc 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -798,15 +798,6 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	show_opcodes(regs, loglvl);
 }
 
-/*
- * The (legacy) vsyscall page is the long page in the kernel portion
- * of the address space that has user-accessible permissions.
- */
-static bool is_vsyscall_vaddr(unsigned long vaddr)
-{
-	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
-}
-
 static void
 __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 		       unsigned long address, u32 pkey, int si_code)
-- 
2.43.0

[PATCH 6.7 033/713] x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 32019c659ecfe1d92e3bf9fcdfbb11a7c70acd58 ]

When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:

  BUG: unable to handle page fault for address: ffffffffff600000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
  ......
  Call Trace:
   <TASK>
   ? copy_from_kernel_nofault+0x6f/0x110
   bpf_probe_read_kernel+0x1d/0x50
   bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
   trace_call_bpf+0xc5/0x1c0
   perf_call_bpf_enter.isra.0+0x69/0xb0
   perf_syscall_enter+0x13e/0x200
   syscall_trace_enter+0x188/0x1c0
   do_syscall_64+0xb5/0xe0
   entry_SYSCALL_64_after_hwframe+0x6e/0x76
   </TASK>
  ......
  ---[ end trace 0000000000000000 ]---

The oops is triggered when:

1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().

2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.

3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.

Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/maccess.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index 6993f026adec9..42115ac079cfe 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -3,6 +3,8 @@
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
 
+#include <asm/vsyscall.h>
+
 #ifdef CONFIG_X86_64
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
@@ -15,6 +17,14 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 	if (vaddr < TASK_SIZE_MAX + PAGE_SIZE)
 		return false;
 
+	/*
+	 * Reading from the vsyscall page may cause an unhandled fault in
+	 * certain cases.  Though it is at an address above TASK_SIZE_MAX, it is
+	 * usually considered as a user space address.
+	 */
+	if (is_vsyscall_vaddr(vaddr))
+		return false;
+
 	/*
 	 * Allow everything during early boot before 'x86_virt_bits'
 	 * is initialized.  Needed for instruction decoding in early
-- 
2.43.0

[PATCH 6.7 034/713] net/iucv: fix the allocation size of iucv_path_table array

[Sasha Levin]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit b4ea9b6a18ebf7f9f3a7a60f82e925186978cfcf ]

iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/iucv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 0ed6e34d6edd1..ce33adb65afb0 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -156,7 +156,7 @@ static char iucv_error_pathid[16] = "INVALID PATHID";
 static LIST_HEAD(iucv_handler_list);
 
 /*
- * iucv_path_table: an array of iucv_path structures.
+ * iucv_path_table: array of pointers to iucv_path structures.
  */
 static struct iucv_path **iucv_path_table;
 static unsigned long iucv_max_pathid;
@@ -544,7 +544,7 @@ static int iucv_enable(void)
 
 	cpus_read_lock();
 	rc = -ENOMEM;
-	alloc_size = iucv_max_pathid * sizeof(struct iucv_path);
+	alloc_size = iucv_max_pathid * sizeof(*iucv_path_table);
 	iucv_path_table = kzalloc(alloc_size, GFP_KERNEL);
 	if (!iucv_path_table)
 		goto out;
-- 
2.43.0

[PATCH 6.7 035/713] parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check

[Sasha Levin]

From: Max Kellermann <max.kellermann@ionos.com>

[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]

Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:

 arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
    82 | int ftrace_enable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
    88 | int ftrace_disable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index d1defb9ede70c..621a4b386ae4f 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent,
 #endif
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	static_key_enable(&ftrace_graph_enable.key);
-- 
2.43.0

[PATCH 6.7 036/713] block: sed-opal: handle empty atoms when parsing response

[Sasha Levin]

From: Greg Joyce <gjoyce@linux.ibm.com>

[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]

The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.

Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/opal_proto.h | 1 +
 block/sed-opal.c   | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/block/opal_proto.h b/block/opal_proto.h
index dec7ce3a3edb7..d247a457bf6e3 100644
--- a/block/opal_proto.h
+++ b/block/opal_proto.h
@@ -71,6 +71,7 @@ enum opal_response_token {
 #define SHORT_ATOM_BYTE  0xBF
 #define MEDIUM_ATOM_BYTE 0xDF
 #define LONG_ATOM_BYTE   0xE3
+#define EMPTY_ATOM_BYTE  0xFF
 
 #define OPAL_INVAL_PARAM 12
 #define OPAL_MANUFACTURED_INACTIVE 0x08
diff --git a/block/sed-opal.c b/block/sed-opal.c
index 3d9e9cd250bd5..fa4dba5d85319 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -1056,16 +1056,20 @@ static int response_parse(const u8 *buf, size_t length,
 			token_length = response_parse_medium(iter, pos);
 		else if (pos[0] <= LONG_ATOM_BYTE) /* long atom */
 			token_length = response_parse_long(iter, pos);
+		else if (pos[0] == EMPTY_ATOM_BYTE) /* empty atom */
+			token_length = 1;
 		else /* TOKEN */
 			token_length = response_parse_token(iter, pos);
 
 		if (token_length < 0)
 			return token_length;
 
+		if (pos[0] != EMPTY_ATOM_BYTE)
+			num_entries++;
+
 		pos += token_length;
 		total -= token_length;
 		iter++;
-		num_entries++;
 	}
 
 	resp->num = num_entries;
-- 
2.43.0

[PATCH 6.7 037/713] cxl/region: Handle endpoint decoders in cxl_region_find_decoder()

[Sasha Levin]

From: Alison Schofield <alison.schofield@intel.com>

[ Upstream commit 453a7fde8031a5192ed2f9646ad048c1a5e930dc ]

In preparation for adding a new caller of cxl_region_find_decoders()
teach it to find a decoder from a cxl_endpoint_decoder structure.

Combining switch and endpoint decoder lookup in one function prevents
code duplication in call sites.

Update the existing caller.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Wonjae Lee <wj28.lee@samsung.com>
Link: https://lore.kernel.org/r/79ae6d72978ef9f3ceec9722e1cb793820553c8e.1706736863.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/core/region.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index 7bb656237fa0c..764998fe03edc 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -729,12 +729,17 @@ static int match_auto_decoder(struct device *dev, void *data)
 	return 0;
 }
 
-static struct cxl_decoder *cxl_region_find_decoder(struct cxl_port *port,
-						   struct cxl_region *cxlr)
+static struct cxl_decoder *
+cxl_region_find_decoder(struct cxl_port *port,
+			struct cxl_endpoint_decoder *cxled,
+			struct cxl_region *cxlr)
 {
 	struct device *dev;
 	int id = 0;
 
+	if (port == cxled_to_port(cxled))
+		return &cxled->cxld;
+
 	if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags))
 		dev = device_find_child(&port->dev, &cxlr->params,
 					match_auto_decoder);
@@ -852,10 +857,7 @@ static int cxl_rr_alloc_decoder(struct cxl_port *port, struct cxl_region *cxlr,
 {
 	struct cxl_decoder *cxld;
 
-	if (port == cxled_to_port(cxled))
-		cxld = &cxled->cxld;
-	else
-		cxld = cxl_region_find_decoder(port, cxlr);
+	cxld = cxl_region_find_decoder(port, cxled, cxlr);
 	if (!cxld) {
 		dev_dbg(&cxlr->dev, "%s: no decoder available\n",
 			dev_name(&port->dev));
-- 
2.43.0

[PATCH 6.7 038/713] cxl/region: Allow out of order assembly of autodiscovered regions

[Sasha Levin]

From: Alison Schofield <alison.schofield@intel.com>

[ Upstream commit cb66b1d60c283bb340a2fc19deff7de8acea74b1 ]

Autodiscovered regions can fail to assemble if they are not discovered
in HPA decode order. The user will see failure messages like:

[] cxl region0: endpoint5: HPA order violation region1
[] cxl region0: endpoint5: failed to allocate region reference

The check that is causing the failure helps the CXL driver enforce
a CXL spec mandate that decoders be committed in HPA order. The
check is needless for autodiscovered regions since their decoders
are already programmed. Trying to enforce order in the assembly of
these regions is useless because they are assembled once all their
member endpoints arrive, and there is no guarantee on the order in
which endpoints are discovered during probe.

Keep the existing check, but for autodiscovered regions, allow the
out of order assembly after a sanity check that the lesser numbered
decoder has the lesser HPA starting address.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Wonjae Lee <wj28.lee@samsung.com>
Link: https://lore.kernel.org/r/3dec69ee97524ab229a20c6739272c3000b18408.1706736863.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/core/region.c | 48 +++++++++++++++++++++++++++++++--------
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index 764998fe03edc..8f0a2507ddecf 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -757,8 +757,31 @@ cxl_region_find_decoder(struct cxl_port *port,
 	return to_cxl_decoder(dev);
 }
 
-static struct cxl_region_ref *alloc_region_ref(struct cxl_port *port,
-					       struct cxl_region *cxlr)
+static bool auto_order_ok(struct cxl_port *port, struct cxl_region *cxlr_iter,
+			  struct cxl_decoder *cxld)
+{
+	struct cxl_region_ref *rr = cxl_rr_load(port, cxlr_iter);
+	struct cxl_decoder *cxld_iter = rr->decoder;
+
+	/*
+	 * Allow the out of order assembly of auto-discovered regions.
+	 * Per CXL Spec 3.1 8.2.4.20.12 software must commit decoders
+	 * in HPA order. Confirm that the decoder with the lesser HPA
+	 * starting address has the lesser id.
+	 */
+	dev_dbg(&cxld->dev, "check for HPA violation %s:%d < %s:%d\n",
+		dev_name(&cxld->dev), cxld->id,
+		dev_name(&cxld_iter->dev), cxld_iter->id);
+
+	if (cxld_iter->id > cxld->id)
+		return true;
+
+	return false;
+}
+
+static struct cxl_region_ref *
+alloc_region_ref(struct cxl_port *port, struct cxl_region *cxlr,
+		 struct cxl_endpoint_decoder *cxled)
 {
 	struct cxl_region_params *p = &cxlr->params;
 	struct cxl_region_ref *cxl_rr, *iter;
@@ -768,16 +791,21 @@ static struct cxl_region_ref *alloc_region_ref(struct cxl_port *port,
 	xa_for_each(&port->regions, index, iter) {
 		struct cxl_region_params *ip = &iter->region->params;
 
-		if (!ip->res)
+		if (!ip->res || ip->res->start < p->res->start)
 			continue;
 
-		if (ip->res->start > p->res->start) {
-			dev_dbg(&cxlr->dev,
-				"%s: HPA order violation %s:%pr vs %pr\n",
-				dev_name(&port->dev),
-				dev_name(&iter->region->dev), ip->res, p->res);
-			return ERR_PTR(-EBUSY);
+		if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) {
+			struct cxl_decoder *cxld;
+
+			cxld = cxl_region_find_decoder(port, cxled, cxlr);
+			if (auto_order_ok(port, iter->region, cxld))
+				continue;
 		}
+		dev_dbg(&cxlr->dev, "%s: HPA order violation %s:%pr vs %pr\n",
+			dev_name(&port->dev),
+			dev_name(&iter->region->dev), ip->res, p->res);
+
+		return ERR_PTR(-EBUSY);
 	}
 
 	cxl_rr = kzalloc(sizeof(*cxl_rr), GFP_KERNEL);
@@ -954,7 +982,7 @@ static int cxl_port_attach_region(struct cxl_port *port,
 			nr_targets_inc = true;
 		}
 	} else {
-		cxl_rr = alloc_region_ref(port, cxlr);
+		cxl_rr = alloc_region_ref(port, cxlr, cxled);
 		if (IS_ERR(cxl_rr)) {
 			dev_dbg(&cxlr->dev,
 				"%s: failed to allocate region reference\n",
-- 
2.43.0

[PATCH 6.7 039/713] perf: CXL: fix CPMU filter value mask length

[Sasha Levin]

From: Hojin Nam <hj96.nam@samsung.com>

[ Upstream commit 802379b8f9e169293e9ba7089e5f1a6340e2e7a3 ]

CPMU filter value is described as 4B length in CXL r3.0 8.2.7.2.2.
However, it is used as 2B length in code and comments.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hojin Nam <hj96.nam@samsung.com>
Link: https://lore.kernel.org/r/20240216014522.32321-1-hj96.nam@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/cxl_pmu.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/perf/cxl_pmu.c b/drivers/perf/cxl_pmu.c
index bc0d414a6aff9..308c9969642e1 100644
--- a/drivers/perf/cxl_pmu.c
+++ b/drivers/perf/cxl_pmu.c
@@ -59,7 +59,7 @@
 #define   CXL_PMU_COUNTER_CFG_EVENT_GRP_ID_IDX_MSK	GENMASK_ULL(63, 59)
 
 #define CXL_PMU_FILTER_CFG_REG(n, f)	(0x400 + 4 * ((f) + (n) * 8))
-#define   CXL_PMU_FILTER_CFG_VALUE_MSK			GENMASK(15, 0)
+#define   CXL_PMU_FILTER_CFG_VALUE_MSK			GENMASK(31, 0)
 
 #define CXL_PMU_COUNTER_REG(n)		(0xc00 + 8 * (n))
 
@@ -314,9 +314,9 @@ static bool cxl_pmu_config1_get_edge(struct perf_event *event)
 }
 
 /*
- * CPMU specification allows for 8 filters, each with a 16 bit value...
- * So we need to find 8x16bits to store it in.
- * As the value used for disable is 0xffff, a separate enable switch
+ * CPMU specification allows for 8 filters, each with a 32 bit value...
+ * So we need to find 8x32bits to store it in.
+ * As the value used for disable is 0xffff_ffff, a separate enable switch
  * is needed.
  */
 
@@ -642,7 +642,7 @@ static void cxl_pmu_event_start(struct perf_event *event, int flags)
 		if (cxl_pmu_config1_hdm_filter_en(event))
 			cfg = cxl_pmu_config2_get_hdm_decoder(event);
 		else
-			cfg = GENMASK(15, 0); /* No filtering if 0xFFFF_FFFF */
+			cfg = GENMASK(31, 0); /* No filtering if 0xFFFF_FFFF */
 		writeq(cfg, base + CXL_PMU_FILTER_CFG_REG(hwc->idx, 0));
 	}
 
-- 
2.43.0

[PATCH 6.7 040/713] platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8215ca518164d35f10c0b5545c8bb80f538638b8 ]

The Acer B1 750 tablet used a Novatek NVT-ts touchscreen,
not a Goodix touchscreen.

Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios
to correctly reflect this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/x86-android-tablets/other.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index bc6bbf7ec6ea1..278402dcb808c 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -68,7 +68,7 @@ static const struct x86_i2c_client_info acer_b1_750_i2c_clients[] __initconst =
 	},
 };
 
-static struct gpiod_lookup_table acer_b1_750_goodix_gpios = {
+static struct gpiod_lookup_table acer_b1_750_nvt_ts_gpios = {
 	.dev_id = "i2c-NVT-ts",
 	.table = {
 		GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_LOW),
@@ -77,7 +77,7 @@ static struct gpiod_lookup_table acer_b1_750_goodix_gpios = {
 };
 
 static struct gpiod_lookup_table * const acer_b1_750_gpios[] = {
-	&acer_b1_750_goodix_gpios,
+	&acer_b1_750_nvt_ts_gpios,
 	&int3496_reference_gpios,
 	NULL
 };
-- 
2.43.0

[PATCH 6.7 041/713] dm-verity, dm-crypt: align "struct bvec_iter" correctly

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 787f1b2800464aa277236a66eb3c279535edd460 ]

"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.

(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])

This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.

[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-crypt.c  | 4 ++--
 drivers/md/dm-verity.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 4ab4e8dcfd3e2..35f50193959e0 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -53,11 +53,11 @@
 struct convert_context {
 	struct completion restart;
 	struct bio *bio_in;
-	struct bio *bio_out;
 	struct bvec_iter iter_in;
+	struct bio *bio_out;
 	struct bvec_iter iter_out;
-	u64 cc_sector;
 	atomic_t cc_pending;
+	u64 cc_sector;
 	union {
 		struct skcipher_request *req;
 		struct aead_request *req_aead;
diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h
index 4620a98c99561..db93a91169d5e 100644
--- a/drivers/md/dm-verity.h
+++ b/drivers/md/dm-verity.h
@@ -80,12 +80,12 @@ struct dm_verity_io {
 	/* original value of bio->bi_end_io */
 	bio_end_io_t *orig_bi_end_io;
 
+	struct bvec_iter iter;
+
 	sector_t block;
 	unsigned int n_blocks;
 	bool in_tasklet;
 
-	struct bvec_iter iter;
-
 	struct work_struct work;
 
 	char *recheck_buffer;
-- 
2.43.0

[PATCH 6.7 042/713] arm: dts: Fix dtc interrupt_provider warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 96fd598e9c34cfa68402a4da3020c9236cfacf35 ]

The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/amazon/alpine.dtsi           |  1 -
 arch/arm/boot/dts/aspeed/aspeed-g4.dtsi        | 14 --------------
 arch/arm/boot/dts/aspeed/aspeed-g5.dtsi        | 15 +--------------
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi        | 18 ++----------------
 arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi     |  3 +++
 arch/arm/boot/dts/broadcom/bcm-hr2.dtsi        |  1 +
 arch/arm/boot/dts/broadcom/bcm-nsp.dtsi        |  2 ++
 arch/arm/boot/dts/marvell/kirkwood-l-50.dts    |  2 ++
 arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi |  2 ++
 .../boot/dts/nvidia/tegra30-apalis-v1.1.dtsi   |  1 -
 arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi   |  1 -
 arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi  |  1 -
 arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts     |  3 ---
 arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi    |  2 +-
 arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi  |  1 -
 arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi |  1 -
 arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi   |  1 -
 .../dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi     |  1 +
 .../nxp/imx/imx6qdl-phytec-phycore-som.dtsi    |  1 +
 arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts |  1 +
 .../boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts    |  1 +
 arch/arm/boot/dts/st/stm32429i-eval.dts        |  1 -
 arch/arm/boot/dts/st/stm32mp157c-dk2.dts       |  1 -
 .../boot/dts/ti/omap/am5729-beagleboneai.dts   |  1 -
 24 files changed, 18 insertions(+), 58 deletions(-)

diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb787..90bd12feac010 100644
--- a/arch/arm/boot/dts/amazon/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@ pcie@fbc00000 {
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb26..857cb26ed6d7e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 {
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@ i2c0: i2c-bus@40 {
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@ i2c1: i2c-bus@80 {
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 {
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@ i2c3: i2c-bus@100 {
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@ i2c4: i2c-bus@140 {
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@ i2c5: i2c-bus@180 {
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 {
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@ i2c7: i2c-bus@300 {
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@ i2c8: i2c-bus@340 {
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@ i2c9: i2c-bus@380 {
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 {
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@ i2c11: i2c-bus@400 {
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@ i2c12: i2c-bus@440 {
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97c..e6f3cf3c721e5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@ sgpio: sgpio@1e780200 {
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 {
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@ i2c0: i2c-bus@40 {
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@ i2c1: i2c-bus@80 {
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 {
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@ i2c3: i2c-bus@100 {
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@ i2c4: i2c-bus@140 {
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@ i2c5: i2c-bus@180 {
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 {
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@ i2c7: i2c-bus@300 {
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@ i2c8: i2c-bus@340 {
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@ i2c9: i2c-bus@380 {
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 {
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@ i2c11: i2c-bus@400 {
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@ i2c12: i2c-bus@440 {
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be3..29f94696d8b18 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@ sgpiom0: sgpiom@1e780500 {
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@ sgpiom1: sgpiom@1e780600 {
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@ &i2c {
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@ i2c0: i2c-bus@80 {
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@ i2c1: i2c-bus@100 {
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@ i2c2: i2c-bus@180 {
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@ i2c3: i2c-bus@200 {
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@ i2c4: i2c-bus@280 {
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@ i2c5: i2c-bus@300 {
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 {
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 {
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 {
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 {
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 {
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 {
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 {
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 {
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 {
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed825181..07ca0d993c9fd 100644
--- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@ gpio_crmu: gpio@3024800 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@ gpio_ccm: gpio@1800a000 {
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@ gpio_asiu: gpio@180a5000 {
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a3..75545b10ef2fa 100644
--- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@ gpiob: gpio@30000 {
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb1..6a4482c931674 100644
--- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@ gpioa: gpio@20 {
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@ gpiob: gpio@30000 {
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c5..c841eb8e7fb1d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@ i2c@11000 {
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@ gpio2: gpio-expander@20 {
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d6..6e1f0f164cb4f 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@ gpio0: gpio@0 {
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@ gpio1: gpio@1 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af2..ff0d684622f74 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@ touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cabf..d38f1dd38a906 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@ touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c558..81c8a5fd92cce 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@ touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1d..cad112e054758 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@ bridge@1,0 {
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@ bridge@2,1 {
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@ bridge@2,2 {
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4a..c1ae7c47b4422 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@ pca9539: pca9539@74 {
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@ pci_root: root@0,0 {
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c521..dcb4f6a32f809 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -619,7 +619,6 @@ stmpe811@41 {
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb1..6cc4d6fd5f28b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -543,7 +543,6 @@ stmpe811@41 {
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc5..42b2ba23aefc9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@ da9063: pmic@58 {
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d544..c0c47adc5866e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@ pmic@58 {
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e011..85e278eb20161 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@ pmic: pmic@58 {
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24af..1b965652291bf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@ pca9554: io-expander@25 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efad..a248b8a453421 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -338,6 +338,7 @@ gpio6: io-expander@22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c516..afa417b34b25f 100644
--- a/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 {
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79c..7a701f7ef0c70 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@ touchscreen@38 {
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d1..5b240769d300e 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -415,7 +415,6 @@ stmpe811@41 {
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
-- 
2.43.0

[PATCH 6.7 043/713] arm64: dts: Fix dtc interrupt_provider warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 91adecf911e5df78ea3e8f866e69db2c33416a5c ]

The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amazon/alpine-v2.dtsi           | 1 -
 arch/arm64/boot/dts/amazon/alpine-v3.dtsi           | 1 -
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi    | 1 +
 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
 arch/arm64/boot/dts/lg/lg1312.dtsi                  | 1 -
 arch/arm64/boot/dts/lg/lg1313.dtsi                  | 1 -
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi       | 1 -
 arch/arm64/boot/dts/mediatek/mt8195-demo.dts        | 1 +
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi            | 4 ++++
 9 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7f98e..dbf2dce8d1d68 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@ pci@fbc00000 {
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd7d4d..3ea178acdddfe 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@ pcie@fbd00000 {
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2c041..896d1f33b5b61 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@ gpio_g: gpio@660a0000 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6b96d..d8516ec0dae74 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@ gpio_hsls: gpio@d0000 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec0a83..b864ffa74ea8b 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@ eth0: ethernet@c1b00000 {
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa5dcb..996fb39bb50c1 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@ eth0: ethernet@c3700000 {
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22cec2b..7ec7c789d87ef 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@ pmu {
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 69c7f3954ae59..4127cb84eba41 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@ mt6360: pmic@34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 3885ef3454ff6..50de17e4fb3f2 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@ gpio_exp_74: gpio@74 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@ gpio_exp_75: gpio@75 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@ gpio_exp_76: gpio@76 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@ gpio_exp_77: gpio@77 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
-- 
2.43.0

[PATCH 6.7 044/713] arm: dts: Fix dtc interrupt_map warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit f02b0f0dc26fbb77fe47b6e47cc5c211f0432c37 ]

The dtc interrupt_map warning is off because its dependency,
interrupt_provider, is off by default. Fix all the warnings so it can be
enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts | 2 ++
 .../boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts  | 2 ++
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi                    | 8 ++++----
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13ab..6d5e69035f94d 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@ pci@c0000000 {
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8c..5f4c849915db7 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@ pci@c0000000 {
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index a976370264fcf..fb6764b2dcde8 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -345,10 +345,10 @@ pcie_rc: pcie@1c00000 {
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
-- 
2.43.0

[PATCH 6.7 045/713] arm64: dts: qcom: Fix interrupt-map cell sizes

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 704dccec0d490f2ad06f3f16ebed254d81906c3a ]

The PCI node interrupt-map properties have the wrong size as #address-cells
in the interrupt parent are not accounted for.

The dtc interrupt_map check catches this, but the warning is off because
its dependency, interrupt_provider, is off by default.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-5-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi |  8 ++++----
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 0b1330b521df4..cf4e501c84bcc 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -759,10 +759,10 @@ pcie0: pci@20000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e5665..b33145b756ebe 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -806,13 +806,13 @@ pcie1: pci@10000000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -868,13 +868,13 @@ pcie0: pci@20000000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
-- 
2.43.0

[PATCH 6.7 046/713] ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 8c987693dc2d292d777f1be63cb35233049ae25e ]

make dtbs_check W=2:

    arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider
    ...

Fix this by adding the missing #interrupt-cells properties.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/renesas/r8a7790-lager.dts   | 1 +
 arch/arm/boot/dts/renesas/r8a7790-stout.dts   | 1 +
 arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 1 +
 arch/arm/boot/dts/renesas/r8a7791-porter.dts  | 1 +
 arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 1 +
 arch/arm/boot/dts/renesas/r8a7793-gose.dts    | 1 +
 arch/arm/boot/dts/renesas/r8a7794-alt.dts     | 1 +
 arch/arm/boot/dts/renesas/r8a7794-silk.dts    | 1 +
 8 files changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 4d666ad8b114b..b17a9f9307e59 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -432,6 +432,7 @@ pmic@58 {
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1e..25956661a8754 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -332,6 +332,7 @@ pmic@58 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 545515b41ea3f..ec01cc8595161 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -795,6 +795,7 @@ pmic@58 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d6..fcc9a2313e1df 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -389,6 +389,7 @@ pmic@5a {
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index e793134f32a30..af16f251849c6 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -332,6 +332,7 @@ pmic@58 {
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b246426..9358fc7d0e9f6 100644
--- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -735,6 +735,7 @@ pmic@58 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 08df031bc27c9..73ec4d3541541 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -453,6 +453,7 @@ pmic@58 {
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126b..b825f2e25dd06 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -424,6 +424,7 @@ pmic@58 {
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
-- 
2.43.0

[PATCH 6.7 047/713] drm/amd/display: fix input states translation error for dcn35 & dcn351

[Sasha Levin]

From: Swapnil Patel <swapnil.patel@amd.com>

[ Upstream commit 27a6c49394b1a203beeb94752c9a1d6318f24ddf ]

[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.

[How]
For dcn35 and dcn351, make output_states equal to input states.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/dml2/dml2_translation_helper.c    | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
index 2c379be19aa84..16452dae4acac 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
@@ -398,7 +398,6 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc,
 	/* Copy clocks tables entries, if available */
 	if (dml2->config.bbox_overrides.clks_table.num_states) {
 		p->in_states->num_states = dml2->config.bbox_overrides.clks_table.num_states;
-
 		for (i = 0; i < dml2->config.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels; i++) {
 			p->in_states->state_array[i].dcfclk_mhz = dml2->config.bbox_overrides.clks_table.clk_entries[i].dcfclk_mhz;
 		}
@@ -437,6 +436,14 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc,
 	}
 
 	dml2_policy_build_synthetic_soc_states(s, p);
+	if (dml2->v20.dml_core_ctx.project == dml_project_dcn35 ||
+		dml2->v20.dml_core_ctx.project == dml_project_dcn351) {
+		// Override last out_state with data from last in_state
+		// This will ensure that out_state contains max fclk
+		memcpy(&p->out_states->state_array[p->out_states->num_states - 1],
+				&p->in_states->state_array[p->in_states->num_states - 1],
+				sizeof(struct soc_state_bounding_box_st));
+	}
 }
 
 void dml2_translate_ip_params(const struct dc *in, struct ip_params_st *out)
-- 
2.43.0

[PATCH 6.7 048/713] regulator: max5970: Fix regulator child node name

[Sasha Levin]

From: Naresh Solanki <naresh.solanki@9elements.com>

[ Upstream commit e5d40e9afd84cec01cdbbbfe62d52f89959ab3ee ]

Update regulator child node name to lower case i.e., sw0 & sw1 as
descibed in max5970 dt binding.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240213145801.2564518-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/max5970-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
index 830a1c4cd7057..8bbcd983a74aa 100644
--- a/drivers/regulator/max5970-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -29,8 +29,8 @@ struct max5970_regulator {
 };
 
 enum max597x_regulator_id {
-	MAX597X_SW0,
-	MAX597X_SW1,
+	MAX597X_sw0,
+	MAX597X_sw1,
 };
 
 static int max5970_read_adc(struct regmap *regmap, int reg, long *val)
@@ -378,8 +378,8 @@ static int max597x_dt_parse(struct device_node *np,
 }
 
 static const struct regulator_desc regulators[] = {
-	MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
-	MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
+	MAX597X_SWITCH(sw0, MAX5970_REG_CHXEN, 0, "vss1"),
+	MAX597X_SWITCH(sw1, MAX5970_REG_CHXEN, 1, "vss2"),
 };
 
 static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
-- 
2.43.0

[PATCH 6.7 049/713] wifi: iwlwifi: mvm: ensure offloading TID queue exists

[Sasha Levin]

From: Benjamin Berg <benjamin.berg@intel.com>

[ Upstream commit 78f65fbf421a61894c14a1b91fe2fb4437b3fe5f ]

The resume code path assumes that the TX queue for the offloading TID
has been configured. At resume time it then tries to sync the write
pointer as it may have been updated by the firmware.

In the unusual event that no packets have been send on TID 0, the queue
will not have been allocated and this causes a crash. Fix this by
ensuring the queue exist at suspend time.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.6632e6dc7b35.Ie6e6a7488c9c7d4529f13d48f752b5439d8ac3c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c  |  9 ++++++-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 28 ++++++++++++++++++++
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h |  3 ++-
 3 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index 92c45571bd691..a640860ab7acd 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -1286,7 +1286,9 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 
 		mvm->net_detect = true;
 	} else {
-		struct iwl_wowlan_config_cmd wowlan_config_cmd = {};
+		struct iwl_wowlan_config_cmd wowlan_config_cmd = {
+			.offloading_tid = 0,
+		};
 
 		wowlan_config_cmd.sta_id = mvmvif->deflink.ap_sta_id;
 
@@ -1298,6 +1300,11 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw,
 			goto out_noreset;
 		}
 
+		ret = iwl_mvm_sta_ensure_queue(
+			mvm, ap_sta->txq[wowlan_config_cmd.offloading_tid]);
+		if (ret)
+			goto out_noreset;
+
 		ret = iwl_mvm_get_wowlan_config(mvm, wowlan, &wowlan_config_cmd,
 						vif, mvmvif, ap_sta);
 		if (ret)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
index bba96a9688906..9905925142279 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -1502,6 +1502,34 @@ static int iwl_mvm_sta_alloc_queue(struct iwl_mvm *mvm,
 	return ret;
 }
 
+int iwl_mvm_sta_ensure_queue(struct iwl_mvm *mvm,
+			     struct ieee80211_txq *txq)
+{
+	struct iwl_mvm_txq *mvmtxq = iwl_mvm_txq_from_mac80211(txq);
+	int ret = -EINVAL;
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (likely(test_bit(IWL_MVM_TXQ_STATE_READY, &mvmtxq->state)) ||
+	    !txq->sta) {
+		return 0;
+	}
+
+	if (!iwl_mvm_sta_alloc_queue(mvm, txq->sta, txq->ac, txq->tid)) {
+		set_bit(IWL_MVM_TXQ_STATE_READY, &mvmtxq->state);
+		ret = 0;
+	}
+
+	local_bh_disable();
+	spin_lock(&mvm->add_stream_lock);
+	if (!list_empty(&mvmtxq->list))
+		list_del_init(&mvmtxq->list);
+	spin_unlock(&mvm->add_stream_lock);
+	local_bh_enable();
+
+	return ret;
+}
+
 void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk)
 {
 	struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm,
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
index b33a0ce096d46..3cf8a70274ce8 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
- * Copyright (C) 2012-2014, 2018-2023 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2024 Intel Corporation
  * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
  * Copyright (C) 2015-2016 Intel Deutschland GmbH
  */
@@ -571,6 +571,7 @@ void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm *mvm,
 				       bool disable);
 
 void iwl_mvm_csa_client_absent(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
+int iwl_mvm_sta_ensure_queue(struct iwl_mvm *mvm, struct ieee80211_txq *txq);
 void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk);
 int iwl_mvm_add_pasn_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			 struct iwl_mvm_int_sta *sta, u8 *addr, u32 cipher,
-- 
2.43.0

[PATCH 6.7 050/713] wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit d3433d1bb7bde449035f54b7000361ce151bad07 ]

Those devices' fifos are numbered differently.
Because of that, we were looking at the size of the VO fifo size to
determine the size of the A-MSDU which led to a lower throughput.

Note that for those devices the only user of the AC -> fifo mapping is
the size limitation of A-MSDU.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.da336ca2fa0a.I73e44d5fc474ebb6f275b9008950e59c012f33b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/txq.h   | 12 +++++++++++-
 drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 11 +++++++++++
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h      |  8 ++++++--
 3 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h b/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h
index 9c69d36743846..e6c0f928a6bbf 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
- * Copyright (C) 2005-2014, 2019-2021, 2023 Intel Corporation
+ * Copyright (C) 2005-2014, 2019-2021, 2023-2024 Intel Corporation
  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
  * Copyright (C) 2016-2017 Intel Deutschland GmbH
  */
@@ -66,6 +66,16 @@ enum iwl_gen2_tx_fifo {
 	IWL_GEN2_TRIG_TX_FIFO_VO,
 };
 
+enum iwl_bz_tx_fifo {
+	IWL_BZ_EDCA_TX_FIFO_BK,
+	IWL_BZ_EDCA_TX_FIFO_BE,
+	IWL_BZ_EDCA_TX_FIFO_VI,
+	IWL_BZ_EDCA_TX_FIFO_VO,
+	IWL_BZ_TRIG_TX_FIFO_BK,
+	IWL_BZ_TRIG_TX_FIFO_BE,
+	IWL_BZ_TRIG_TX_FIFO_VI,
+	IWL_BZ_TRIG_TX_FIFO_VO,
+};
 /**
  * enum iwl_tx_queue_cfg_actions - TXQ config options
  * @TX_QUEUE_CFG_ENABLE_QUEUE: enable a queue
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
index c4f96125cf33a..25a5a31e63c2a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
@@ -31,6 +31,17 @@ const u8 iwl_mvm_ac_to_gen2_tx_fifo[] = {
 	IWL_GEN2_TRIG_TX_FIFO_BK,
 };
 
+const u8 iwl_mvm_ac_to_bz_tx_fifo[] = {
+	IWL_BZ_EDCA_TX_FIFO_VO,
+	IWL_BZ_EDCA_TX_FIFO_VI,
+	IWL_BZ_EDCA_TX_FIFO_BE,
+	IWL_BZ_EDCA_TX_FIFO_BK,
+	IWL_BZ_TRIG_TX_FIFO_VO,
+	IWL_BZ_TRIG_TX_FIFO_VI,
+	IWL_BZ_TRIG_TX_FIFO_BE,
+	IWL_BZ_TRIG_TX_FIFO_BK,
+};
+
 struct iwl_mvm_mac_iface_iterator_data {
 	struct iwl_mvm *mvm;
 	struct ieee80211_vif *vif;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
index f2af3e5714090..3be67f0ff74f7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -1574,12 +1574,16 @@ static inline int iwl_mvm_max_active_links(struct iwl_mvm *mvm,
 
 extern const u8 iwl_mvm_ac_to_tx_fifo[];
 extern const u8 iwl_mvm_ac_to_gen2_tx_fifo[];
+extern const u8 iwl_mvm_ac_to_bz_tx_fifo[];
 
 static inline u8 iwl_mvm_mac_ac_to_tx_fifo(struct iwl_mvm *mvm,
 					   enum ieee80211_ac_numbers ac)
 {
-	return iwl_mvm_has_new_tx_api(mvm) ?
-		iwl_mvm_ac_to_gen2_tx_fifo[ac] : iwl_mvm_ac_to_tx_fifo[ac];
+	if (mvm->trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ)
+		return iwl_mvm_ac_to_bz_tx_fifo[ac];
+	if (iwl_mvm_has_new_tx_api(mvm))
+		return iwl_mvm_ac_to_gen2_tx_fifo[ac];
+	return iwl_mvm_ac_to_tx_fifo[ac];
 }
 
 struct iwl_rate_info {
-- 
2.43.0

[PATCH 6.7 051/713] btrfs: zoned: don't skip block group profile checks on conventional zones

[Sasha Levin]

From: Johannes Thumshirn <johannes.thumshirn@wdc.com>

[ Upstream commit 5906333cc4af7b3fdb8cfff1cb3e8e579bd13174 ]

On a zoned filesystem with conventional zones, we're skipping the block
group profile checks for the conventional zones.

This allows converting a zoned filesystem's data block groups to RAID when
all of the zones backing the chunk are on conventional zones.  But this
will lead to problems, once we're trying to allocate chunks backed by
sequential zones.

So also check for conventional zones when loading a block group's profile
on them.

Reported-by: HAN Yuwei <hrx@bupt.moe>
Link: https://lore.kernel.org/all/1ACD2E3643008A17+da260584-2c7f-432a-9e22-9d390aae84cc@bupt.moe/#t
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/zoned.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c
index 3779e76a15d64..524532f992746 100644
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -1661,6 +1661,15 @@ int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache, bool new)
 	}
 
 out:
+	/* Reject non SINGLE data profiles without RST */
+	if ((map->type & BTRFS_BLOCK_GROUP_DATA) &&
+	    (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) &&
+	    !fs_info->stripe_root) {
+		btrfs_err(fs_info, "zoned: data %s needs raid-stripe-tree",
+			  btrfs_bg_type_to_raid_name(map->type));
+		return -EINVAL;
+	}
+
 	if (cache->alloc_offset > cache->zone_capacity) {
 		btrfs_err(fs_info,
 "zoned: invalid write pointer %llu (larger than zone capacity %llu) in block group %llu",
-- 
2.43.0

[PATCH 6.7 052/713] btrfs: fix data races when accessing the reserved amount of block reserves

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit e06cc89475eddc1f3a7a4d471524256152c68166 ]

At space_info.c we have several places where we access the ->reserved
field of a block reserve without taking the block reserve's spinlock
first, which makes KCSAN warn about a data race since that field is
always updated while holding the spinlock.

The reports from KCSAN are like the following:

  [117.193526] BUG: KCSAN: data-race in btrfs_block_rsv_release [btrfs] / need_preemptive_reclaim [btrfs]

  [117.195148] read to 0x000000017f587190 of 8 bytes by task 6303 on cpu 3:
  [117.195172]  need_preemptive_reclaim+0x222/0x2f0 [btrfs]
  [117.195992]  __reserve_bytes+0xbb0/0xdc8 [btrfs]
  [117.196807]  btrfs_reserve_metadata_bytes+0x4c/0x120 [btrfs]
  [117.197620]  btrfs_block_rsv_add+0x78/0xa8 [btrfs]
  [117.198434]  btrfs_delayed_update_inode+0x154/0x368 [btrfs]
  [117.199300]  btrfs_update_inode+0x108/0x1c8 [btrfs]
  [117.200122]  btrfs_dirty_inode+0xb4/0x140 [btrfs]
  [117.200937]  btrfs_update_time+0x8c/0xb0 [btrfs]
  [117.201754]  touch_atime+0x16c/0x1e0
  [117.201789]  filemap_read+0x674/0x728
  [117.201823]  btrfs_file_read_iter+0xf8/0x410 [btrfs]
  [117.202653]  vfs_read+0x2b6/0x498
  [117.203454]  ksys_read+0xa2/0x150
  [117.203473]  __s390x_sys_read+0x68/0x88
  [117.203495]  do_syscall+0x1c6/0x210
  [117.203517]  __do_syscall+0xc8/0xf0
  [117.203539]  system_call+0x70/0x98

  [117.203579] write to 0x000000017f587190 of 8 bytes by task 11 on cpu 0:
  [117.203604]  btrfs_block_rsv_release+0x2e8/0x578 [btrfs]
  [117.204432]  btrfs_delayed_inode_release_metadata+0x7c/0x1d0 [btrfs]
  [117.205259]  __btrfs_update_delayed_inode+0x37c/0x5e0 [btrfs]
  [117.206093]  btrfs_async_run_delayed_root+0x356/0x498 [btrfs]
  [117.206917]  btrfs_work_helper+0x160/0x7a0 [btrfs]
  [117.207738]  process_one_work+0x3b6/0x838
  [117.207768]  worker_thread+0x75e/0xb10
  [117.207797]  kthread+0x21a/0x230
  [117.207830]  __ret_from_fork+0x6c/0xb8
  [117.207861]  ret_from_fork+0xa/0x30

So add a helper to get the reserved amount of a block reserve while
holding the lock. The value may be not be up to date anymore when used by
need_preemptive_reclaim() and btrfs_preempt_reclaim_metadata_space(), but
that's ok since the worst it can do is cause more reclaim work do be done
sooner rather than later. Reading the field while holding the lock instead
of using the data_race() annotation is used in order to prevent load
tearing.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-rsv.h  | 16 ++++++++++++++++
 fs/btrfs/space-info.c | 26 +++++++++++++-------------
 2 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/fs/btrfs/block-rsv.h b/fs/btrfs/block-rsv.h
index b0bd12b8652f4..fb440a074700a 100644
--- a/fs/btrfs/block-rsv.h
+++ b/fs/btrfs/block-rsv.h
@@ -101,4 +101,20 @@ static inline bool btrfs_block_rsv_full(const struct btrfs_block_rsv *rsv)
 	return data_race(rsv->full);
 }
 
+/*
+ * Get the reserved mount of a block reserve in a context where getting a stale
+ * value is acceptable, instead of accessing it directly and trigger data race
+ * warning from KCSAN.
+ */
+static inline u64 btrfs_block_rsv_reserved(struct btrfs_block_rsv *rsv)
+{
+	u64 ret;
+
+	spin_lock(&rsv->lock);
+	ret = rsv->reserved;
+	spin_unlock(&rsv->lock);
+
+	return ret;
+}
+
 #endif /* BTRFS_BLOCK_RSV_H */
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index 571bb13587d5e..3b54eb5834746 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -856,7 +856,7 @@ btrfs_calc_reclaim_metadata_size(struct btrfs_fs_info *fs_info,
 static bool need_preemptive_reclaim(struct btrfs_fs_info *fs_info,
 				    struct btrfs_space_info *space_info)
 {
-	u64 global_rsv_size = fs_info->global_block_rsv.reserved;
+	const u64 global_rsv_size = btrfs_block_rsv_reserved(&fs_info->global_block_rsv);
 	u64 ordered, delalloc;
 	u64 thresh;
 	u64 used;
@@ -956,8 +956,8 @@ static bool need_preemptive_reclaim(struct btrfs_fs_info *fs_info,
 	ordered = percpu_counter_read_positive(&fs_info->ordered_bytes) >> 1;
 	delalloc = percpu_counter_read_positive(&fs_info->delalloc_bytes);
 	if (ordered >= delalloc)
-		used += fs_info->delayed_refs_rsv.reserved +
-			fs_info->delayed_block_rsv.reserved;
+		used += btrfs_block_rsv_reserved(&fs_info->delayed_refs_rsv) +
+			btrfs_block_rsv_reserved(&fs_info->delayed_block_rsv);
 	else
 		used += space_info->bytes_may_use - global_rsv_size;
 
@@ -1173,7 +1173,7 @@ static void btrfs_preempt_reclaim_metadata_space(struct work_struct *work)
 		enum btrfs_flush_state flush;
 		u64 delalloc_size = 0;
 		u64 to_reclaim, block_rsv_size;
-		u64 global_rsv_size = global_rsv->reserved;
+		const u64 global_rsv_size = btrfs_block_rsv_reserved(global_rsv);
 
 		loops++;
 
@@ -1185,9 +1185,9 @@ static void btrfs_preempt_reclaim_metadata_space(struct work_struct *work)
 		 * assume it's tied up in delalloc reservations.
 		 */
 		block_rsv_size = global_rsv_size +
-			delayed_block_rsv->reserved +
-			delayed_refs_rsv->reserved +
-			trans_rsv->reserved;
+			btrfs_block_rsv_reserved(delayed_block_rsv) +
+			btrfs_block_rsv_reserved(delayed_refs_rsv) +
+			btrfs_block_rsv_reserved(trans_rsv);
 		if (block_rsv_size < space_info->bytes_may_use)
 			delalloc_size = space_info->bytes_may_use - block_rsv_size;
 
@@ -1207,16 +1207,16 @@ static void btrfs_preempt_reclaim_metadata_space(struct work_struct *work)
 			to_reclaim = delalloc_size;
 			flush = FLUSH_DELALLOC;
 		} else if (space_info->bytes_pinned >
-			   (delayed_block_rsv->reserved +
-			    delayed_refs_rsv->reserved)) {
+			   (btrfs_block_rsv_reserved(delayed_block_rsv) +
+			    btrfs_block_rsv_reserved(delayed_refs_rsv))) {
 			to_reclaim = space_info->bytes_pinned;
 			flush = COMMIT_TRANS;
-		} else if (delayed_block_rsv->reserved >
-			   delayed_refs_rsv->reserved) {
-			to_reclaim = delayed_block_rsv->reserved;
+		} else if (btrfs_block_rsv_reserved(delayed_block_rsv) >
+			   btrfs_block_rsv_reserved(delayed_refs_rsv)) {
+			to_reclaim = btrfs_block_rsv_reserved(delayed_block_rsv);
 			flush = FLUSH_DELAYED_ITEMS_NR;
 		} else {
-			to_reclaim = delayed_refs_rsv->reserved;
+			to_reclaim = btrfs_block_rsv_reserved(delayed_refs_rsv);
 			flush = FLUSH_DELAYED_REFS_NR;
 		}
 
-- 
2.43.0

[PATCH 6.7 053/713] btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit c7bb26b847e5b97814f522686068c5628e2b3646 ]

At btrfs_use_block_rsv() we read the size of a block reserve without
locking its spinlock, which makes KCSAN complain because the size of a
block reserve is always updated while holding its spinlock. The report
from KCSAN is the following:

  [653.313148] BUG: KCSAN: data-race in btrfs_update_delayed_refs_rsv [btrfs] / btrfs_use_block_rsv [btrfs]

  [653.314755] read to 0x000000017f5871b8 of 8 bytes by task 7519 on cpu 0:
  [653.314779]  btrfs_use_block_rsv+0xe4/0x2f8 [btrfs]
  [653.315606]  btrfs_alloc_tree_block+0xdc/0x998 [btrfs]
  [653.316421]  btrfs_force_cow_block+0x220/0xe38 [btrfs]
  [653.317242]  btrfs_cow_block+0x1ac/0x568 [btrfs]
  [653.318060]  btrfs_search_slot+0xda2/0x19b8 [btrfs]
  [653.318879]  btrfs_del_csums+0x1dc/0x798 [btrfs]
  [653.319702]  __btrfs_free_extent.isra.0+0xc24/0x2028 [btrfs]
  [653.320538]  __btrfs_run_delayed_refs+0xd3c/0x2390 [btrfs]
  [653.321340]  btrfs_run_delayed_refs+0xae/0x290 [btrfs]
  [653.322140]  flush_space+0x5e4/0x718 [btrfs]
  [653.322958]  btrfs_preempt_reclaim_metadata_space+0x102/0x2f8 [btrfs]
  [653.323781]  process_one_work+0x3b6/0x838
  [653.323800]  worker_thread+0x75e/0xb10
  [653.323817]  kthread+0x21a/0x230
  [653.323836]  __ret_from_fork+0x6c/0xb8
  [653.323855]  ret_from_fork+0xa/0x30

  [653.323887] write to 0x000000017f5871b8 of 8 bytes by task 576 on cpu 3:
  [653.323906]  btrfs_update_delayed_refs_rsv+0x1a4/0x250 [btrfs]
  [653.324699]  btrfs_add_delayed_data_ref+0x468/0x6d8 [btrfs]
  [653.325494]  btrfs_free_extent+0x76/0x120 [btrfs]
  [653.326280]  __btrfs_mod_ref+0x6a8/0x6b8 [btrfs]
  [653.327064]  btrfs_dec_ref+0x50/0x70 [btrfs]
  [653.327849]  walk_up_proc+0x236/0xa50 [btrfs]
  [653.328633]  walk_up_tree+0x21c/0x448 [btrfs]
  [653.329418]  btrfs_drop_snapshot+0x802/0x1328 [btrfs]
  [653.330205]  btrfs_clean_one_deleted_snapshot+0x184/0x238 [btrfs]
  [653.330995]  cleaner_kthread+0x2b0/0x2f0 [btrfs]
  [653.331781]  kthread+0x21a/0x230
  [653.331800]  __ret_from_fork+0x6c/0xb8
  [653.331818]  ret_from_fork+0xa/0x30

So add a helper to get the size of a block reserve while holding the lock.
Reading the field while holding the lock instead of using the data_race()
annotation is used in order to prevent load tearing.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-rsv.c |  2 +-
 fs/btrfs/block-rsv.h | 16 ++++++++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/block-rsv.c b/fs/btrfs/block-rsv.c
index ceb5f586a2d55..1043a8142351b 100644
--- a/fs/btrfs/block-rsv.c
+++ b/fs/btrfs/block-rsv.c
@@ -494,7 +494,7 @@ struct btrfs_block_rsv *btrfs_use_block_rsv(struct btrfs_trans_handle *trans,
 
 	block_rsv = get_block_rsv(trans, root);
 
-	if (unlikely(block_rsv->size == 0))
+	if (unlikely(btrfs_block_rsv_size(block_rsv) == 0))
 		goto try_reserve;
 again:
 	ret = btrfs_block_rsv_use_bytes(block_rsv, blocksize);
diff --git a/fs/btrfs/block-rsv.h b/fs/btrfs/block-rsv.h
index fb440a074700a..43a9a6b5a79f4 100644
--- a/fs/btrfs/block-rsv.h
+++ b/fs/btrfs/block-rsv.h
@@ -117,4 +117,20 @@ static inline u64 btrfs_block_rsv_reserved(struct btrfs_block_rsv *rsv)
 	return ret;
 }
 
+/*
+ * Get the size of a block reserve in a context where getting a stale value is
+ * acceptable, instead of accessing it directly and trigger data race warning
+ * from KCSAN.
+ */
+static inline u64 btrfs_block_rsv_size(struct btrfs_block_rsv *rsv)
+{
+	u64 ret;
+
+	spin_lock(&rsv->lock);
+	ret = rsv->size;
+	spin_unlock(&rsv->lock);
+
+	return ret;
+}
+
 #endif /* BTRFS_BLOCK_RSV_H */
-- 
2.43.0

[PATCH 6.7 054/713] spi: cadence-qspi: put runtime in runtime PM hooks names

[Sasha Levin]

From: Théo Lebrun <theo.lebrun@bootlin.com>

[ Upstream commit 4efa1250b59ebf47ce64a7b6b7c3e2e0a2a9d35a ]

Follow kernel naming convention with regards to power-management
callback function names.

The convention in the kernel is:
 - prefix_suspend means the system-wide suspend callback;
 - prefix_runtime_suspend means the runtime PM suspend callback.
The same applies to resume callbacks.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-3-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence-quadspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 731775d34d393..4b2d42e54f568 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1927,7 +1927,7 @@ static void cqspi_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 }
 
-static int cqspi_suspend(struct device *dev)
+static int cqspi_runtime_suspend(struct device *dev)
 {
 	struct cqspi_st *cqspi = dev_get_drvdata(dev);
 
@@ -1936,7 +1936,7 @@ static int cqspi_suspend(struct device *dev)
 	return 0;
 }
 
-static int cqspi_resume(struct device *dev)
+static int cqspi_runtime_resume(struct device *dev)
 {
 	struct cqspi_st *cqspi = dev_get_drvdata(dev);
 
@@ -1949,8 +1949,8 @@ static int cqspi_resume(struct device *dev)
 	return 0;
 }
 
-static DEFINE_RUNTIME_DEV_PM_OPS(cqspi_dev_pm_ops, cqspi_suspend,
-				 cqspi_resume, NULL);
+static DEFINE_RUNTIME_DEV_PM_OPS(cqspi_dev_pm_ops, cqspi_runtime_suspend,
+				 cqspi_runtime_resume, NULL);
 
 static const struct cqspi_driver_platdata cdns_qspi = {
 	.quirks = CQSPI_DISABLE_DAC_MODE,
-- 
2.43.0

[PATCH 6.7 055/713] spi: cadence-qspi: add system-wide suspend and resume callbacks

[Sasha Levin]

From: Théo Lebrun <theo.lebrun@bootlin.com>

[ Upstream commit 078d62de433b4f4556bb676e5dd670f0d4103376 ]

Each SPI controller is expected to call the spi_controller_suspend() and
spi_controller_resume() callbacks at system-wide suspend and resume.

It (1) handles the kthread worker for queued controllers and (2) marks
the controller as suspended to have spi_sync() fail while the
controller is unavailable.

Those two operations do not require the controller to be active, we do
not need to increment the runtime PM usage counter.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-4-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence-quadspi.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 4b2d42e54f568..1a8d03958dffb 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1949,8 +1949,24 @@ static int cqspi_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static DEFINE_RUNTIME_DEV_PM_OPS(cqspi_dev_pm_ops, cqspi_runtime_suspend,
-				 cqspi_runtime_resume, NULL);
+static int cqspi_suspend(struct device *dev)
+{
+	struct cqspi_st *cqspi = dev_get_drvdata(dev);
+
+	return spi_controller_suspend(cqspi->host);
+}
+
+static int cqspi_resume(struct device *dev)
+{
+	struct cqspi_st *cqspi = dev_get_drvdata(dev);
+
+	return spi_controller_resume(cqspi->host);
+}
+
+static const struct dev_pm_ops cqspi_dev_pm_ops = {
+	RUNTIME_PM_OPS(cqspi_runtime_suspend, cqspi_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(cqspi_suspend, cqspi_resume)
+};
 
 static const struct cqspi_driver_platdata cdns_qspi = {
 	.quirks = CQSPI_DISABLE_DAC_MODE,
-- 
2.43.0

[PATCH 6.7 056/713] net: smsc95xx: add support for SYS TEC USB-SPEmodule1

[Sasha Levin]

From: Andre Werner <andre.werner@systec-electronic.com>

[ Upstream commit 45532b21dc2a692444b6ad5f71c253cca53e8103 ]

This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L
ethernet device to the existing smsc95xx driver by adding the new
USB VID/PID pair.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc95xx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index a530f20ee2575..2fa46baa589e5 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -2104,6 +2104,11 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE(0x0424, 0x9E08),
 		.driver_info = (unsigned long) &smsc95xx_info,
 	},
+	{
+		/* SYSTEC USB-SPEmodule1 10BASE-T1L Ethernet Device */
+		USB_DEVICE(0x0878, 0x1400),
+		.driver_info = (unsigned long)&smsc95xx_info,
+	},
 	{
 		/* Microchip's EVB-LAN8670-USB 10BASE-T1S Ethernet Device */
 		USB_DEVICE(0x184F, 0x0051),
-- 
2.43.0

[PATCH 6.7 057/713] wifi: mac80211: only call drv_sta_rc_update for uploaded stations

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 413dafc8170fcb925fb17af8842f06af305f8e0b ]

When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rate.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index d5ea5f5bcf3a0..9d33fd2377c88 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -119,7 +119,8 @@ void rate_control_rate_update(struct ieee80211_local *local,
 		rcu_read_unlock();
 	}
 
-	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
+	if (sta->uploaded)
+		drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
 }
 
 int ieee80211_rate_control_register(const struct rate_control_ops *ops)
-- 
2.43.0

[PATCH 6.7 058/713] drm/ttm/tests: depend on UML || COMPILE_TEST

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 9d3f8a723c7950e56e0b95ab84b572caee29e065 ]

At least the device test requires that no other driver using TTM is
loaded. So make those unit tests depend on UML || COMPILE_TEST to
prevent people from trying them on bare metal.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/all/20240219230116.77b8ad68@yea/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3eee8636f847a..9b079f3a1b811 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -198,7 +198,7 @@ config DRM_TTM
 config DRM_TTM_KUNIT_TEST
         tristate "KUnit tests for TTM" if !KUNIT_ALL_TESTS
         default n
-        depends on DRM && KUNIT && MMU
+        depends on DRM && KUNIT && MMU && (UML || COMPILE_TEST)
         select DRM_TTM
         select DRM_EXPORT_FOR_TESTS if m
         select DRM_KUNIT_TEST_HELPERS
@@ -206,7 +206,8 @@ config DRM_TTM_KUNIT_TEST
         help
           Enables unit tests for TTM, a GPU memory manager subsystem used
           to manage memory buffers. This option is mostly useful for kernel
-          developers.
+          developers. It depends on (UML || COMPILE_TEST) since no other driver
+          which uses TTM can be loaded while running the tests.
 
           If in doubt, say "N".
 
-- 
2.43.0

[PATCH 6.7 059/713] ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table

[Sasha Levin]

From: Johnny Hsieh <mnixry@outlook.com>

[ Upstream commit 50ee641643dd0f46702e9a99354398196e1734c2 ]

This patch adds Lenovo 21J0 (ThinkBook 16 G5+ ARP) to the DMI quirks table
to enable internal microphone array.

Cc: linux-sound@vger.kernel.org
Signed-off-by: Johnny Hsieh <mnixry@outlook.com>
Link: https://msgid.link/r/TYSPR04MB8429D62DFDB6727866ECF1DEC55A2@TYSPR04MB8429.apcprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index cc231185d72c3..5587198751daa 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -199,6 +199,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "21HY"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21J0"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH 6.7 060/713] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

[Sasha Levin]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit ee0017c3ed8a8abfa4d40e42f908fb38c31e7515 ]

If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index a75f670bf5519..aa29e250cf15f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -7387,7 +7387,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 		return -EFAULT;
 	}
 
- issue_diag_reset:
+	return 0;
+
+issue_diag_reset:
 	rc = _base_diag_reset(ioc);
 	return rc;
 }
-- 
2.43.0

[PATCH 6.7 061/713] ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port

[Sasha Levin]

From: Kailang Yang <kailang@realtek.com>

[ Upstream commit b34bf65838f7c6e785f62681605a538b73c2808c ]

It had pop noise from Headphone port when system reboot state.
If NID 58h Index 0x0 to fill default value, it will reduce pop noise.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/7493e207919a4fb3a0599324fd010e3e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index eb45e5c3db8c6..ebde2ea8fa812 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3684,6 +3684,7 @@ static void alc285_hp_init(struct hda_codec *codec)
 	int i, val;
 	int coef38, coef0d, coef36;
 
+	alc_write_coefex_idx(codec, 0x58, 0x00, 0x1888); /* write default value */
 	alc_update_coef_idx(codec, 0x4a, 1<<15, 1<<15); /* Reset HP JD */
 	coef38 = alc_read_coef_idx(codec, 0x38); /* Amp control */
 	coef0d = alc_read_coef_idx(codec, 0x0d); /* Digital Misc control */
-- 
2.43.0

[PATCH 6.7 062/713] drm/amdgpu: Enable gpu reset for S3 abort cases on Raven series

[Sasha Levin]

From: Prike Liang <Prike.Liang@amd.com>

[ Upstream commit c671ec01311b4744b377f98b0b4c6d033fe569b3 ]

Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/soc15.c | 45 +++++++++++++++++-------------
 1 file changed, 25 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index 9b5af3f1383a7..f9ba1803046d9 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -574,11 +574,34 @@ soc15_asic_reset_method(struct amdgpu_device *adev)
 		return AMD_RESET_METHOD_MODE1;
 }
 
+static bool soc15_need_reset_on_resume(struct amdgpu_device *adev)
+{
+	u32 sol_reg;
+
+	sol_reg = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81);
+
+	/* Will reset for the following suspend abort cases.
+	 * 1) Only reset limit on APU side, dGPU hasn't checked yet.
+	 * 2) S3 suspend abort and TOS already launched.
+	 */
+	if (adev->flags & AMD_IS_APU && adev->in_s3 &&
+			!adev->suspend_complete &&
+			sol_reg)
+		return true;
+
+	return false;
+}
+
 static int soc15_asic_reset(struct amdgpu_device *adev)
 {
 	/* original raven doesn't have full asic reset */
-	if ((adev->apu_flags & AMD_APU_IS_RAVEN) ||
-	    (adev->apu_flags & AMD_APU_IS_RAVEN2))
+	/* On the latest Raven, the GPU reset can be performed
+	 * successfully. So now, temporarily enable it for the
+	 * S3 suspend abort case.
+	 */
+	if (((adev->apu_flags & AMD_APU_IS_RAVEN) ||
+	    (adev->apu_flags & AMD_APU_IS_RAVEN2)) &&
+		!soc15_need_reset_on_resume(adev))
 		return 0;
 
 	switch (soc15_asic_reset_method(adev)) {
@@ -1297,24 +1320,6 @@ static int soc15_common_suspend(void *handle)
 	return soc15_common_hw_fini(adev);
 }
 
-static bool soc15_need_reset_on_resume(struct amdgpu_device *adev)
-{
-	u32 sol_reg;
-
-	sol_reg = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81);
-
-	/* Will reset for the following suspend abort cases.
-	 * 1) Only reset limit on APU side, dGPU hasn't checked yet.
-	 * 2) S3 suspend abort and TOS already launched.
-	 */
-	if (adev->flags & AMD_IS_APU && adev->in_s3 &&
-			!adev->suspend_complete &&
-			sol_reg)
-		return true;
-
-	return false;
-}
-
 static int soc15_common_resume(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-- 
2.43.0

[PATCH 6.7 063/713] drm/buddy: check range allocation matches alignment

[Sasha Levin]

From: Matthew Auld <matthew.auld@intel.com>

[ Upstream commit 2986314aa811c8a23aeb292edd30315495d54966 ]

Likely not a big deal for real users, but for consistency we should
respect the min_page_size here. Main issue is that bias allocations
turns into normal range allocation if the range and size matches
exactly, and in the next patch we want to add some unit tests for this
part of the api.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219121851.25774-5-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_buddy.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_buddy.c b/drivers/gpu/drm/drm_buddy.c
index f3a6ac908f815..5ebdd6f8f36e6 100644
--- a/drivers/gpu/drm/drm_buddy.c
+++ b/drivers/gpu/drm/drm_buddy.c
@@ -771,8 +771,12 @@ int drm_buddy_alloc_blocks(struct drm_buddy *mm,
 		return -EINVAL;
 
 	/* Actual range allocation */
-	if (start + size == end)
+	if (start + size == end) {
+		if (!IS_ALIGNED(start | end, min_block_size))
+			return -EINVAL;
+
 		return __drm_buddy_alloc_range(mm, start, size, NULL, blocks);
+	}
 
 	original_size = size;
 	original_min_size = min_block_size;
-- 
2.43.0

[PATCH 6.7 064/713] ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2

[Sasha Levin]

From: Jiawei Wang <me@jwang.link>

[ Upstream commit ed00a6945dc32462c2d3744a3518d2316da66fcc ]

Like many other models, the Lenovo 21J2 (ThinkBook 16 G5+ APO)
needs a quirk entry for the internal microphone to function.

Signed-off-by: Jiawei Wang <me@jwang.link>
Link: https://msgid.link/r/20240228073914.232204-2-me@jwang.link
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 5587198751daa..abb9589b8477c 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -199,6 +199,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "21HY"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21J2"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH 6.7 065/713] Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

[Sasha Levin]

From: Yuxuan Hu <20373622@buaa.edu.cn>

[ Upstream commit 2535b848fa0f42ddff3e5255cf5e742c9b77bb26 ]

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/rfcomm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 053ef8f25fae4..1d34d84970332 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1941,7 +1941,7 @@ static struct rfcomm_session *rfcomm_process_rx(struct rfcomm_session *s)
 	/* Get data directly from socket receive queue without copying it. */
 	while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
 		skb_orphan(skb);
-		if (!skb_linearize(skb)) {
+		if (!skb_linearize(skb) && sk->sk_state != BT_CLOSED) {
 			s = rfcomm_recv_frame(s, skb);
 			if (!s)
 				break;
-- 
2.43.0

[PATCH 6.7 066/713] Bluetooth: mgmt: Fix limited discoverable off timeout

[Sasha Levin]

From: Frédéric Danis <frederic.danis@collabora.com>

[ Upstream commit 0bd1fb586235224048c726922db048d1bce6354a ]

LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C

Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 9dd815b6603fe..2448a154a4069 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1045,6 +1045,8 @@ static void rpa_expired(struct work_struct *work)
 	hci_cmd_sync_queue(hdev, rpa_expired_sync, NULL, NULL);
 }
 
+static int set_discoverable_sync(struct hci_dev *hdev, void *data);
+
 static void discov_off(struct work_struct *work)
 {
 	struct hci_dev *hdev = container_of(work, struct hci_dev,
@@ -1063,7 +1065,7 @@ static void discov_off(struct work_struct *work)
 	hci_dev_clear_flag(hdev, HCI_DISCOVERABLE);
 	hdev->discov_timeout = 0;
 
-	hci_update_discoverable(hdev);
+	hci_cmd_sync_queue(hdev, set_discoverable_sync, NULL, NULL);
 
 	mgmt_new_settings(hdev);
 
-- 
2.43.0

[PATCH 6.7 067/713] firewire: core: use long bus reset on gap count error

[Sasha Levin]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit d0b06dc48fb15902d7da09c5c0861e7f042a9381 ]

When resetting the bus after a gap count error, use a long rather than
short bus reset.

IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of
short bus resets. When video or audio transmission is in progress and a
device is hot-plugged elsewhere on the bus, the resulting bus reset can
cause video frame drops or audio dropouts. Short bus resets reduce or
eliminate this problem. Accordingly, short bus resets are almost always
preferred.

However, on a mixed 1394/1394a bus, a short bus reset can trigger an
immediate additional bus reset. This double bus reset can be interpreted
differently by different nodes on the bus, resulting in an inconsistent gap
count after the bus reset. An inconsistent gap count will cause another bus
reset, leading to a neverending bus reset loop. This only happens for some
bus topologies, not for all mixed 1394/1394a buses.

By instead sending a long bus reset after a gap count inconsistency, we
avoid the doubled bus reset, restoring the bus to normal operation.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Link: https://sourceforge.net/p/linux1394/mailman/message/58741624/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/core-card.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 8aaa7fcb2630d..401a77e3b5fa8 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -500,7 +500,19 @@ static void bm_work(struct work_struct *work)
 		fw_notice(card, "phy config: new root=%x, gap_count=%d\n",
 			  new_root_id, gap_count);
 		fw_send_phy_config(card, new_root_id, generation, gap_count);
-		reset_bus(card, true);
+		/*
+		 * Where possible, use a short bus reset to minimize
+		 * disruption to isochronous transfers. But in the event
+		 * of a gap count inconsistency, use a long bus reset.
+		 *
+		 * As noted in 1394a 8.4.6.2, nodes on a mixed 1394/1394a bus
+		 * may set different gap counts after a bus reset. On a mixed
+		 * 1394/1394a bus, a short bus reset can get doubled. Some
+		 * nodes may treat the double reset as one bus reset and others
+		 * may treat it as two, causing a gap count inconsistency
+		 * again. Using a long bus reset prevents this.
+		 */
+		reset_bus(card, card->gap_count != 0);
 		/* Will allocate broadcast channel after the reset. */
 		goto out;
 	}
-- 
2.43.0

[PATCH 6.7 068/713] perf: RISCV: Fix panic on pmu overflow handler

[Sasha Levin]

From: Fei Wu <fei2.wu@intel.com>

[ Upstream commit 34b567868777e9fd39ec5333969728a7f0cf179c ]

(1 << idx) of int is not desired when setting bits in unsigned long
overflowed_ctrs, use BIT() instead. This panic happens when running
'perf record -e branches' on sophgo sg2042.

[  273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[  273.320851] Oops [#1]
[  273.323179] Modules linked in:
[  273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9
[  273.332521] Hardware name: Sophgo Mango (DT)
[  273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62
[  273.342291]  ra : pmu_sbi_ovf_handler+0x2e0/0x34e
[  273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0
[  273.354454]  gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978
[  273.361815]  t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70
[  273.369180]  s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000
[  273.376540]  a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015
[  273.383901]  a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a
[  273.391327]  s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0
[  273.398773]  s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210
[  273.406139]  s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098
[  273.413660]  s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca
[  273.421022]  t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8
[  273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d
[  273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62
[  273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee
[  273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36
[  273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e
[  273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74
[  273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92
[  273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783
[  273.477921] ---[ end trace 0000000000000000 ]---
[  273.482630] Kernel panic - not syncing: Fatal exception in interrupt

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Link: https://lore.kernel.org/r/20240228115425.2613856-1-fei2.wu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/riscv_pmu_sbi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 16acd4dcdb96c..452aab49db1e8 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -512,7 +512,7 @@ static void pmu_sbi_set_scounteren(void *arg)
 
 	if (event->hw.idx != -1)
 		csr_write(CSR_SCOUNTEREN,
-			  csr_read(CSR_SCOUNTEREN) | (1 << pmu_sbi_csr_index(event)));
+			  csr_read(CSR_SCOUNTEREN) | BIT(pmu_sbi_csr_index(event)));
 }
 
 static void pmu_sbi_reset_scounteren(void *arg)
@@ -521,7 +521,7 @@ static void pmu_sbi_reset_scounteren(void *arg)
 
 	if (event->hw.idx != -1)
 		csr_write(CSR_SCOUNTEREN,
-			  csr_read(CSR_SCOUNTEREN) & ~(1 << pmu_sbi_csr_index(event)));
+			  csr_read(CSR_SCOUNTEREN) & ~BIT(pmu_sbi_csr_index(event)));
 }
 
 static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
@@ -731,14 +731,14 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 		/* compute hardware counter index */
 		hidx = info->csr - CSR_CYCLE;
 		/* check if the corresponding bit is set in sscountovf */
-		if (!(overflow & (1 << hidx)))
+		if (!(overflow & BIT(hidx)))
 			continue;
 
 		/*
 		 * Keep a track of overflowed counters so that they can be started
 		 * with updated initial value.
 		 */
-		overflowed_ctrs |= 1 << lidx;
+		overflowed_ctrs |= BIT(lidx);
 		hw_evt = &event->hw;
 		riscv_pmu_event_update(event);
 		perf_sample_data_init(&data, 0, hw_evt->last_period);
-- 
2.43.0

[PATCH 6.7 069/713] arm64: tegra: Set the correct PHY mode for MGBE

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 4c892121d43bc2b45896ca207b54f39a8fa6b852 ]

The PHY is configured in 10GBASE-R, so make sure to reflect that in DT.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a7027c4..81a82933e3500 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -175,7 +175,7 @@ ethernet@6800000 {
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
-- 
2.43.0

[PATCH 6.7 070/713] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

[Sasha Levin]

From: Alban Boyé <alban.boye@protonmail.com>

[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ]

The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.

Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 42466b4b1ca45..a290f498ba823 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -685,6 +685,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Chuwi Vi8 dual-boot (CWI506) */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
+			/* The above are too generic, also match BIOS info */
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		/* Chuwi Vi10 (CWI505) */
 		.matches = {
-- 
2.43.0

[PATCH 6.7 071/713] x86/hyperv: Allow 15-bit APIC IDs for VTL platforms

[Sasha Levin]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit 0d63e4c0ebc2b5c329babde44fd61d3f08db814d ]

The current method for signaling the compatibility of a Hyper-V host
with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf.
However, for higher VTLs, this leaf is not reported, due to the absence
of an IO-APIC.

As an alternative, assume that when running at a high VTL, the host
supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not
employ any architectural MSIs at higher VTLs

This unblocks startup of VTL2 environments with more than 256 CPUs.

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/hv_vtl.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
index 96e6c51515f50..cf1b78cb2d043 100644
--- a/arch/x86/hyperv/hv_vtl.c
+++ b/arch/x86/hyperv/hv_vtl.c
@@ -16,6 +16,11 @@
 extern struct boot_params boot_params;
 static struct real_mode_header hv_vtl_real_mode_header;
 
+static bool __init hv_vtl_msi_ext_dest_id(void)
+{
+	return true;
+}
+
 void __init hv_vtl_init_platform(void)
 {
 	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
@@ -38,6 +43,8 @@ void __init hv_vtl_init_platform(void)
 	x86_platform.legacy.warm_reset = 0;
 	x86_platform.legacy.reserve_bios_regions = 0;
 	x86_platform.legacy.devices.pnpbios = 0;
+
+	x86_init.hyper.msi_ext_dest_id = hv_vtl_msi_ext_dest_id;
 }
 
 static inline u64 hv_vtl_system_desc_base(struct ldttss_desc *desc)
-- 
2.43.0

[PATCH 6.7 072/713] ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit 6214e24cae9b10a7c1572f99552610a24614fffe ]

These models use 2 CS35L41 amps with HDA using I2C.
Both models have _DSD support inside cs35l41_hda_property.c.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218437

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301160154.158398-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ebde2ea8fa812..baf550b5a7c49 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10289,6 +10289,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3886, "Y780 VECO DUAL", ALC287_FIXUP_TAS2781_I2C),
 	SND_PCI_QUIRK(0x17aa, 0x38a7, "Y780P AMD YG dual", ALC287_FIXUP_TAS2781_I2C),
 	SND_PCI_QUIRK(0x17aa, 0x38a8, "Y780P AMD VECO dual", ALC287_FIXUP_TAS2781_I2C),
+	SND_PCI_QUIRK(0x17aa, 0x38a9, "Thinkbook 16P", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x17aa, 0x38ab, "Thinkbook 16P", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b4, "Legion Slim 7 16IRH8", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b5, "Legion Slim 7 16IRH8", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b6, "Legion Slim 7 16APH8", ALC287_FIXUP_CS35L41_I2C_2),
-- 
2.43.0

[PATCH 6.7 073/713] ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit b603d95692e47dc6f5f733e93c3841dc0c01e624 ]

Whilst this laptop contains _DSD inside the BIOS, there is an error in
this configuration. Override the _DSD in the BIOS with the correct
configuration for this laptop.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301160154.158398-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 6cf4c02f9effd..5a5f4b499fd94 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -83,6 +83,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431863", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "104318D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
+	{ "10431A83", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431C9F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431CAF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431CCF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
@@ -420,6 +421,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "104317F3", generic_dsd_config },
 	{ "CSC3551", "10431863", generic_dsd_config },
 	{ "CSC3551", "104318D3", generic_dsd_config },
+	{ "CSC3551", "10431A83", generic_dsd_config },
 	{ "CSC3551", "10431C9F", generic_dsd_config },
 	{ "CSC3551", "10431CAF", generic_dsd_config },
 	{ "CSC3551", "10431CCF", generic_dsd_config },
-- 
2.43.0

[PATCH 6.7 074/713] ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table

[Sasha Levin]

From: Al Raj Hassain <alrajhassain@gmail.com>

[ Upstream commit b3a51137607cee7c814cd3a75d96f78b9ee1dc1f ]

The HP Pavilion Aero Laptop 13-be2xxx(8BD6) requires a quirk entry for its internal microphone to function.

Signed-off-by: Al Raj Hassain <alrajhassain@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/r/20240304103924.13673-1-alrajhassain@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index abb9589b8477c..90360f8b3e81b 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -416,6 +416,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "8B2F"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "8BD6"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH 6.7 075/713] xfrm: fix xfrm child route lookup for packet offload

[Sasha Levin]

From: Mike Yu <yumike@google.com>

[ Upstream commit d4872d70fc6feabfc8e897edad993a81096ade9f ]

In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).

If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.

This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.

Test: verified IPv6-in-IPv4 packets on Android device with
      IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_policy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index e69d588caa0c6..9c5f2efed3333 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2694,7 +2694,9 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 			if (xfrm[i]->props.smark.v || xfrm[i]->props.smark.m)
 				mark = xfrm_smark_get(fl->flowi_mark, xfrm[i]);
 
-			family = xfrm[i]->props.family;
+			if (xfrm[i]->xso.type != XFRM_DEV_OFFLOAD_PACKET)
+				family = xfrm[i]->props.family;
+
 			oif = fl->flowi_oif ? : fl->flowi_l3mdev;
 			dst = xfrm_dst_lookup(xfrm[i], tos, oif,
 					      &saddr, &daddr, family, mark);
-- 
2.43.0

[PATCH 6.7 076/713] xfrm: set skb control buffer based on packet offload as well

[Sasha Levin]

From: Mike Yu <yumike@google.com>

[ Upstream commit 8688ab2170a5be0bc922195f7091c38b506bab2e ]

In packet offload, packets are not encrypted in XFRM stack, so
the next network layer which the packets will be forwarded to
should depend on where the packet came from (either xfrm4_output
or xfrm6_output) rather than the matched SA's family type.

Test: verified IPv6-in-IPv4 packets on Android device with
      IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_output.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 662c83beb345e..e5722c95b8bb3 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -704,9 +704,13 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb)
 {
 	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	int family;
 	int err;
 
-	switch (x->outer_mode.family) {
+	family = (x->xso.type != XFRM_DEV_OFFLOAD_PACKET) ? x->outer_mode.family
+		: skb_dst(skb)->ops->family;
+
+	switch (family) {
 	case AF_INET:
 		memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
 		IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
-- 
2.43.0

[PATCH 6.7 077/713] Input: gpio_keys_polled - suppress deferred probe error for gpio

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 963465a33141d0d52338e77f80fe543d2c9dc053 ]

On a PC Engines APU our admins are faced with:

	$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517"
	261

Such a message always appears when e.g. a new USB device is plugged in.

Suppress this message which considerably clutters the kernel log for
EPROBE_DEFER (i.e. -517).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/gpio_keys_polled.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index ba00ecfbd343b..b41fd1240f431 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -315,12 +315,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			error = devm_gpio_request_one(dev, button->gpio,
 					flags, button->desc ? : DRV_NAME);
-			if (error) {
-				dev_err(dev,
-					"unable to claim gpio %u, err=%d\n",
-					button->gpio, error);
-				return error;
-			}
+			if (error)
+				return dev_err_probe(dev, error,
+						     "unable to claim gpio %u\n",
+						     button->gpio);
 
 			bdata->gpiod = gpio_to_desc(button->gpio);
 			if (!bdata->gpiod) {
-- 
2.43.0

[PATCH 6.7 078/713] ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index fb90ae6a8a344..6d7bb696b1356 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2914,8 +2914,12 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 	switch (fll_id) {
 	case WM8962_FLL_MCLK:
 	case WM8962_FLL_BCLK:
+		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		break;
 	case WM8962_FLL_OSC:
 		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		snd_soc_component_update_bits(component, WM8962_PLL2,
+					      WM8962_OSC_ENA, WM8962_OSC_ENA);
 		break;
 	case WM8962_FLL_INT:
 		snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
-- 
2.43.0

[PATCH 6.7 079/713] ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 6d7bb696b1356..2256cc0a37ebd 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2229,6 +2229,9 @@ SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
 
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
 SND_SOC_DAPM_OUTPUT("HPOUTR"),
+
+SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = {
@@ -2236,7 +2239,6 @@ SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0,
 		   spkmixl, ARRAY_SIZE(spkmixl)),
 SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
-SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 SND_SOC_DAPM_OUTPUT("SPKOUT"),
 };
 
@@ -2251,9 +2253,6 @@ SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
 
-SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
-SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
-
 SND_SOC_DAPM_OUTPUT("SPKOUTL"),
 SND_SOC_DAPM_OUTPUT("SPKOUTR"),
 };
@@ -2366,12 +2365,18 @@ static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = {
 	{ "Speaker PGA", "Mixer", "Speaker Mixer" },
 	{ "Speaker PGA", "DAC", "DACL" },
 
-	{ "Speaker Output", NULL, "Speaker PGA" },
-	{ "Speaker Output", NULL, "SYSCLK" },
-	{ "Speaker Output", NULL, "TOCLK" },
-	{ "Speaker Output", NULL, "TEMP_SPK" },
+	{ "SPKOUTL Output", NULL, "Speaker PGA" },
+	{ "SPKOUTL Output", NULL, "SYSCLK" },
+	{ "SPKOUTL Output", NULL, "TOCLK" },
+	{ "SPKOUTL Output", NULL, "TEMP_SPK" },
+
+	{ "SPKOUTR Output", NULL, "Speaker PGA" },
+	{ "SPKOUTR Output", NULL, "SYSCLK" },
+	{ "SPKOUTR Output", NULL, "TOCLK" },
+	{ "SPKOUTR Output", NULL, "TEMP_SPK" },
 
-	{ "SPKOUT", NULL, "Speaker Output" },
+	{ "SPKOUT", NULL, "SPKOUTL Output" },
+	{ "SPKOUT", NULL, "SPKOUTR Output" },
 };
 
 static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
-- 
2.43.0

[PATCH 6.7 080/713] ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ]

Use source instead of ret, which seems to be unrelated and will always
be zero.

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 2256cc0a37ebd..7c6ed29831285 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2933,7 +2933,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 				    WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO);
 		break;
 	default:
-		dev_err(component->dev, "Unknown FLL source %d\n", ret);
+		dev_err(component->dev, "Unknown FLL source %d\n", source);
 		return -EINVAL;
 	}
 
-- 
2.43.0

[PATCH 6.7 081/713] do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit 3948abaa4e2be938ccdfc289385a27342fb13d43 ]

syzbot identified a kernel information leak vulnerability in
do_sys_name_to_handle() and issued the following report [1].

[1]
"BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 copy_to_user include/linux/uaccess.h:191 [inline]
 do_sys_name_to_handle fs/fhandle.c:73 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
 __do_kmalloc_node mm/slab_common.c:1006 [inline]
 __kmalloc+0x121/0x3c0 mm/slab_common.c:1020
 kmalloc include/linux/slab.h:604 [inline]
 do_sys_name_to_handle fs/fhandle.c:39 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Bytes 18-19 of 20 are uninitialized
Memory access of size 20 starts at ffff888128a46380
Data copied to user address 0000000020000240"

Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to
solve the problem.

Fixes: 990d6c2d7aee ("vfs: Add name to file handle conversion support")
Suggested-by: Chuck Lever III <chuck.lever@oracle.com>
Reported-and-tested-by: <syzbot+09b349b3066c2e0b1e96@syzkaller.appspotmail.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240119153906.4367-1-n.zhandarovich@fintech.ru
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fhandle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fhandle.c b/fs/fhandle.c
index 18b3ba8dc8ead..57a12614addfd 100644
--- a/fs/fhandle.c
+++ b/fs/fhandle.c
@@ -36,7 +36,7 @@ static long do_sys_name_to_handle(const struct path *path,
 	if (f_handle.handle_bytes > MAX_HANDLE_SZ)
 		return -EINVAL;
 
-	handle = kmalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
+	handle = kzalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
 			 GFP_KERNEL);
 	if (!handle)
 		return -ENOMEM;
-- 
2.43.0

[PATCH 6.7 082/713] workqueue.c: Increase workqueue name length

[Sasha Levin]

From: Audra Mitchell <audra@redhat.com>

[ Upstream commit 31c89007285d365aa36f71d8fb0701581c770a27 ]

Currently we limit the size of the workqueue name to 24 characters due to
commit ecf6881ff349 ("workqueue: make workqueue->name[] fixed len")
Increase the size to 32 characters and print a warning in the event
the requested name is larger than the limit of 32 characters.

Signed-off-by: Audra Mitchell <audra@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4f87b1851c74a..1c72a616b9888 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -108,7 +108,7 @@ enum {
 	RESCUER_NICE_LEVEL	= MIN_NICE,
 	HIGHPRI_NICE_LEVEL	= MIN_NICE,
 
-	WQ_NAME_LEN		= 24,
+	WQ_NAME_LEN		= 32,
 };
 
 /*
@@ -4673,6 +4673,7 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	va_list args;
 	struct workqueue_struct *wq;
 	struct pool_workqueue *pwq;
+	int len;
 
 	/*
 	 * Unbound && max_active == 1 used to imply ordered, which is no longer
@@ -4699,9 +4700,12 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	}
 
 	va_start(args, max_active);
-	vsnprintf(wq->name, sizeof(wq->name), fmt, args);
+	len = vsnprintf(wq->name, sizeof(wq->name), fmt, args);
 	va_end(args);
 
+	if (len >= WQ_NAME_LEN)
+		pr_warn_once("workqueue: name exceeds WQ_NAME_LEN. Truncating to: %s\n", wq->name);
+
 	max_active = max_active ?: WQ_DFL_ACTIVE;
 	max_active = wq_clamp_max_active(max_active, flags, wq->name);
 
-- 
2.43.0

[PATCH 6.7 083/713] workqueue: Move pwq->max_active to wq->max_active

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit a045a272d887575da17ad86d6573e82871b50c27 ]

max_active is a workqueue-wide setting and the configured value is stored in
wq->saved_max_active; however, the effective value was stored in
pwq->max_active. While this is harmless, it makes max_active update process
more complicated and gets in the way of the planned max_active semantic
updates for unbound workqueues.

This patches moves pwq->max_active to wq->max_active. This simplifies the
code and makes freezing and noop max_active updates cheaper too. No
user-visible behavior change is intended.

As wq->max_active is updated while holding wq mutex but read without any
locking, it now uses WRITE/READ_ONCE(). A new locking locking rule WO is
added for it.

v2: wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 133 ++++++++++++++++++++++-----------------------
 1 file changed, 66 insertions(+), 67 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 1c72a616b9888..f67eb40203ffc 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -143,6 +143,9 @@ enum {
  *
  * WR: wq->mutex protected for writes.  RCU protected for reads.
  *
+ * WO: wq->mutex protected for writes. Updated with WRITE_ONCE() and can be read
+ *     with READ_ONCE() without locking.
+ *
  * MD: wq_mayday_lock protected.
  *
  * WD: Used internally by the watchdog.
@@ -250,7 +253,6 @@ struct pool_workqueue {
 	 * is marked with WORK_STRUCT_INACTIVE iff it is in pwq->inactive_works.
 	 */
 	int			nr_active;	/* L: nr of active works */
-	int			max_active;	/* L: max active works */
 	struct list_head	inactive_works;	/* L: inactive works */
 	struct list_head	pwqs_node;	/* WR: node on wq->pwqs */
 	struct list_head	mayday_node;	/* MD: node on wq->maydays */
@@ -298,7 +300,8 @@ struct workqueue_struct {
 	struct worker		*rescuer;	/* MD: rescue worker */
 
 	int			nr_drainers;	/* WQ: drain in progress */
-	int			saved_max_active; /* WQ: saved pwq max_active */
+	int			max_active;	/* WO: max active works */
+	int			saved_max_active; /* WQ: saved max_active */
 
 	struct workqueue_attrs	*unbound_attrs;	/* PW: only for unbound wqs */
 	struct pool_workqueue	*dfl_pwq;	/* PW: only for unbound wqs */
@@ -1486,7 +1489,7 @@ static void pwq_dec_nr_in_flight(struct pool_workqueue *pwq, unsigned long work_
 		pwq->nr_active--;
 		if (!list_empty(&pwq->inactive_works)) {
 			/* one down, submit an inactive one */
-			if (pwq->nr_active < pwq->max_active)
+			if (pwq->nr_active < READ_ONCE(pwq->wq->max_active))
 				pwq_activate_first_inactive(pwq);
 		}
 	}
@@ -1787,7 +1790,13 @@ static void __queue_work(int cpu, struct workqueue_struct *wq,
 	pwq->nr_in_flight[pwq->work_color]++;
 	work_flags = work_color_to_flags(pwq->work_color);
 
-	if (likely(pwq->nr_active < pwq->max_active)) {
+	/*
+	 * Limit the number of concurrently active work items to max_active.
+	 * @work must also queue behind existing inactive work items to maintain
+	 * ordering when max_active changes. See wq_adjust_max_active().
+	 */
+	if (list_empty(&pwq->inactive_works) &&
+	    pwq->nr_active < READ_ONCE(pwq->wq->max_active)) {
 		if (list_empty(&pool->worklist))
 			pool->watchdog_ts = jiffies;
 
@@ -4136,50 +4145,6 @@ static void pwq_release_workfn(struct kthread_work *work)
 	}
 }
 
-/**
- * pwq_adjust_max_active - update a pwq's max_active to the current setting
- * @pwq: target pool_workqueue
- *
- * If @pwq isn't freezing, set @pwq->max_active to the associated
- * workqueue's saved_max_active and activate inactive work items
- * accordingly.  If @pwq is freezing, clear @pwq->max_active to zero.
- */
-static void pwq_adjust_max_active(struct pool_workqueue *pwq)
-{
-	struct workqueue_struct *wq = pwq->wq;
-	bool freezable = wq->flags & WQ_FREEZABLE;
-	unsigned long flags;
-
-	/* for @wq->saved_max_active */
-	lockdep_assert_held(&wq->mutex);
-
-	/* fast exit for non-freezable wqs */
-	if (!freezable && pwq->max_active == wq->saved_max_active)
-		return;
-
-	/* this function can be called during early boot w/ irq disabled */
-	raw_spin_lock_irqsave(&pwq->pool->lock, flags);
-
-	/*
-	 * During [un]freezing, the caller is responsible for ensuring that
-	 * this function is called at least once after @workqueue_freezing
-	 * is updated and visible.
-	 */
-	if (!freezable || !workqueue_freezing) {
-		pwq->max_active = wq->saved_max_active;
-
-		while (!list_empty(&pwq->inactive_works) &&
-		       pwq->nr_active < pwq->max_active)
-			pwq_activate_first_inactive(pwq);
-
-		kick_pool(pwq->pool);
-	} else {
-		pwq->max_active = 0;
-	}
-
-	raw_spin_unlock_irqrestore(&pwq->pool->lock, flags);
-}
-
 /* initialize newly allocated @pwq which is associated with @wq and @pool */
 static void init_pwq(struct pool_workqueue *pwq, struct workqueue_struct *wq,
 		     struct worker_pool *pool)
@@ -4212,9 +4177,6 @@ static void link_pwq(struct pool_workqueue *pwq)
 	/* set the matching work_color */
 	pwq->work_color = wq->work_color;
 
-	/* sync max_active to the current setting */
-	pwq_adjust_max_active(pwq);
-
 	/* link in @pwq */
 	list_add_rcu(&pwq->pwqs_node, &wq->pwqs);
 }
@@ -4665,6 +4627,52 @@ static int init_rescuer(struct workqueue_struct *wq)
 	return 0;
 }
 
+/**
+ * wq_adjust_max_active - update a wq's max_active to the current setting
+ * @wq: target workqueue
+ *
+ * If @wq isn't freezing, set @wq->max_active to the saved_max_active and
+ * activate inactive work items accordingly. If @wq is freezing, clear
+ * @wq->max_active to zero.
+ */
+static void wq_adjust_max_active(struct workqueue_struct *wq)
+{
+	struct pool_workqueue *pwq;
+
+	lockdep_assert_held(&wq->mutex);
+
+	if ((wq->flags & WQ_FREEZABLE) && workqueue_freezing) {
+		WRITE_ONCE(wq->max_active, 0);
+		return;
+	}
+
+	if (wq->max_active == wq->saved_max_active)
+		return;
+
+	/*
+	 * Update @wq->max_active and then kick inactive work items if more
+	 * active work items are allowed. This doesn't break work item ordering
+	 * because new work items are always queued behind existing inactive
+	 * work items if there are any.
+	 */
+	WRITE_ONCE(wq->max_active, wq->saved_max_active);
+
+	for_each_pwq(pwq, wq) {
+		unsigned long flags;
+
+		/* this function can be called during early boot w/ irq disabled */
+		raw_spin_lock_irqsave(&pwq->pool->lock, flags);
+
+		while (!list_empty(&pwq->inactive_works) &&
+		       pwq->nr_active < wq->max_active)
+			pwq_activate_first_inactive(pwq);
+
+		kick_pool(pwq->pool);
+
+		raw_spin_unlock_irqrestore(&pwq->pool->lock, flags);
+	}
+}
+
 __printf(1, 4)
 struct workqueue_struct *alloc_workqueue(const char *fmt,
 					 unsigned int flags,
@@ -4672,7 +4680,6 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 {
 	va_list args;
 	struct workqueue_struct *wq;
-	struct pool_workqueue *pwq;
 	int len;
 
 	/*
@@ -4711,6 +4718,7 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 
 	/* init wq */
 	wq->flags = flags;
+	wq->max_active = max_active;
 	wq->saved_max_active = max_active;
 	mutex_init(&wq->mutex);
 	atomic_set(&wq->nr_pwqs_to_flush, 0);
@@ -4739,8 +4747,7 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	mutex_lock(&wq_pool_mutex);
 
 	mutex_lock(&wq->mutex);
-	for_each_pwq(pwq, wq)
-		pwq_adjust_max_active(pwq);
+	wq_adjust_max_active(wq);
 	mutex_unlock(&wq->mutex);
 
 	list_add_tail_rcu(&wq->list, &workqueues);
@@ -4878,8 +4885,6 @@ EXPORT_SYMBOL_GPL(destroy_workqueue);
  */
 void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
 {
-	struct pool_workqueue *pwq;
-
 	/* disallow meddling with max_active for ordered workqueues */
 	if (WARN_ON(wq->flags & __WQ_ORDERED_EXPLICIT))
 		return;
@@ -4890,9 +4895,7 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
 
 	wq->flags &= ~__WQ_ORDERED;
 	wq->saved_max_active = max_active;
-
-	for_each_pwq(pwq, wq)
-		pwq_adjust_max_active(pwq);
+	wq_adjust_max_active(wq);
 
 	mutex_unlock(&wq->mutex);
 }
@@ -5139,8 +5142,8 @@ static void show_pwq(struct pool_workqueue *pwq)
 	pr_info("  pwq %d:", pool->id);
 	pr_cont_pool_info(pool);
 
-	pr_cont(" active=%d/%d refcnt=%d%s\n",
-		pwq->nr_active, pwq->max_active, pwq->refcnt,
+	pr_cont(" active=%d refcnt=%d%s\n",
+		pwq->nr_active, pwq->refcnt,
 		!list_empty(&pwq->mayday_node) ? " MAYDAY" : "");
 
 	hash_for_each(pool->busy_hash, bkt, worker, hentry) {
@@ -5688,7 +5691,6 @@ EXPORT_SYMBOL_GPL(work_on_cpu_safe_key);
 void freeze_workqueues_begin(void)
 {
 	struct workqueue_struct *wq;
-	struct pool_workqueue *pwq;
 
 	mutex_lock(&wq_pool_mutex);
 
@@ -5697,8 +5699,7 @@ void freeze_workqueues_begin(void)
 
 	list_for_each_entry(wq, &workqueues, list) {
 		mutex_lock(&wq->mutex);
-		for_each_pwq(pwq, wq)
-			pwq_adjust_max_active(pwq);
+		wq_adjust_max_active(wq);
 		mutex_unlock(&wq->mutex);
 	}
 
@@ -5763,7 +5764,6 @@ bool freeze_workqueues_busy(void)
 void thaw_workqueues(void)
 {
 	struct workqueue_struct *wq;
-	struct pool_workqueue *pwq;
 
 	mutex_lock(&wq_pool_mutex);
 
@@ -5775,8 +5775,7 @@ void thaw_workqueues(void)
 	/* restore max_active and repopulate worklist */
 	list_for_each_entry(wq, &workqueues, list) {
 		mutex_lock(&wq->mutex);
-		for_each_pwq(pwq, wq)
-			pwq_adjust_max_active(pwq);
+		wq_adjust_max_active(wq);
 		mutex_unlock(&wq->mutex);
 	}
 
-- 
2.43.0

[PATCH 6.7 084/713] workqueue: Factor out pwq_is_empty()

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit afa87ce85379e2d93863fce595afdb5771a84004 ]

"!pwq->nr_active && list_empty(&pwq->inactive_works)" test is repeated
multiple times. Let's factor it out into pwq_is_empty().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index f67eb40203ffc..4674b45620e74 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1450,6 +1450,11 @@ static void put_pwq_unlocked(struct pool_workqueue *pwq)
 	}
 }
 
+static bool pwq_is_empty(struct pool_workqueue *pwq)
+{
+	return !pwq->nr_active && list_empty(&pwq->inactive_works);
+}
+
 static void pwq_activate_inactive_work(struct work_struct *work)
 {
 	struct pool_workqueue *pwq = get_work_pwq(work);
@@ -3319,7 +3324,7 @@ void drain_workqueue(struct workqueue_struct *wq)
 		bool drained;
 
 		raw_spin_lock_irq(&pwq->pool->lock);
-		drained = !pwq->nr_active && list_empty(&pwq->inactive_works);
+		drained = pwq_is_empty(pwq);
 		raw_spin_unlock_irq(&pwq->pool->lock);
 
 		if (drained)
@@ -4779,7 +4784,7 @@ static bool pwq_busy(struct pool_workqueue *pwq)
 
 	if ((pwq != pwq->wq->dfl_pwq) && (pwq->refcnt > 1))
 		return true;
-	if (pwq->nr_active || !list_empty(&pwq->inactive_works))
+	if (!pwq_is_empty(pwq))
 		return true;
 
 	return false;
@@ -5217,7 +5222,7 @@ void show_one_workqueue(struct workqueue_struct *wq)
 	unsigned long flags;
 
 	for_each_pwq(pwq, wq) {
-		if (pwq->nr_active || !list_empty(&pwq->inactive_works)) {
+		if (!pwq_is_empty(pwq)) {
 			idle = false;
 			break;
 		}
@@ -5229,7 +5234,7 @@ void show_one_workqueue(struct workqueue_struct *wq)
 
 	for_each_pwq(pwq, wq) {
 		raw_spin_lock_irqsave(&pwq->pool->lock, flags);
-		if (pwq->nr_active || !list_empty(&pwq->inactive_works)) {
+		if (!pwq_is_empty(pwq)) {
 			/*
 			 * Defer printing to avoid deadlocks in console
 			 * drivers that queue work while holding locks
-- 
2.43.0

[PATCH 6.7 085/713] workqueue: Replace pwq_activate_inactive_work() with [__]pwq_activate_work()

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 4c6380305d21e36581b451f7337a36c93b64e050 ]

To prepare for unbound nr_active handling improvements, move work activation
part of pwq_activate_inactive_work() into __pwq_activate_work() and add
pwq_activate_work() which tests WORK_STRUCT_INACTIVE and updates nr_active.

pwq_activate_first_inactive() and try_to_grab_pending() are updated to use
pwq_activate_work(). The latter conversion is functionally identical. For
the former, this conversion adds an unnecessary WORK_STRUCT_INACTIVE
testing. This is temporary and will be removed by the next patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4674b45620e74..861d8c7d6449a 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1455,16 +1455,36 @@ static bool pwq_is_empty(struct pool_workqueue *pwq)
 	return !pwq->nr_active && list_empty(&pwq->inactive_works);
 }
 
-static void pwq_activate_inactive_work(struct work_struct *work)
+static void __pwq_activate_work(struct pool_workqueue *pwq,
+				struct work_struct *work)
 {
-	struct pool_workqueue *pwq = get_work_pwq(work);
-
 	trace_workqueue_activate_work(work);
 	if (list_empty(&pwq->pool->worklist))
 		pwq->pool->watchdog_ts = jiffies;
 	move_linked_works(work, &pwq->pool->worklist, NULL);
 	__clear_bit(WORK_STRUCT_INACTIVE_BIT, work_data_bits(work));
+}
+
+/**
+ * pwq_activate_work - Activate a work item if inactive
+ * @pwq: pool_workqueue @work belongs to
+ * @work: work item to activate
+ *
+ * Returns %true if activated. %false if already active.
+ */
+static bool pwq_activate_work(struct pool_workqueue *pwq,
+			      struct work_struct *work)
+{
+	struct worker_pool *pool = pwq->pool;
+
+	lockdep_assert_held(&pool->lock);
+
+	if (!(*work_data_bits(work) & WORK_STRUCT_INACTIVE))
+		return false;
+
 	pwq->nr_active++;
+	__pwq_activate_work(pwq, work);
+	return true;
 }
 
 static void pwq_activate_first_inactive(struct pool_workqueue *pwq)
@@ -1472,7 +1492,7 @@ static void pwq_activate_first_inactive(struct pool_workqueue *pwq)
 	struct work_struct *work = list_first_entry(&pwq->inactive_works,
 						    struct work_struct, entry);
 
-	pwq_activate_inactive_work(work);
+	pwq_activate_work(pwq, work);
 }
 
 /**
@@ -1610,8 +1630,7 @@ static int try_to_grab_pending(struct work_struct *work, bool is_dwork,
 		 * management later on and cause stall.  Make sure the work
 		 * item is activated before grabbing.
 		 */
-		if (*work_data_bits(work) & WORK_STRUCT_INACTIVE)
-			pwq_activate_inactive_work(work);
+		pwq_activate_work(pwq, work);
 
 		list_del_init(&work->entry);
 		pwq_dec_nr_in_flight(pwq, *work_data_bits(work));
-- 
2.43.0

[PATCH 6.7 086/713] workqueue: Move nr_active handling into helpers

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 1c270b79ce0b8290f146255ea9057243f6dd3c17 ]

__queue_work(), pwq_dec_nr_in_flight() and wq_adjust_max_active() were
open-coding nr_active handling, which is fine given that the operations are
trivial. However, the planned unbound nr_active update will make them more
complicated, so let's move them into helpers.

- pwq_tryinc_nr_active() is added. It increments nr_active if under
  max_active limit and return a boolean indicating whether inc was
  successful. Note that the function is structured to accommodate future
  changes. __queue_work() is updated to use the new helper.

- pwq_activate_first_inactive() is updated to use pwq_tryinc_nr_active() and
  thus no longer assumes that nr_active is under max_active and returns a
  boolean to indicate whether a work item has been activated.

- wq_adjust_max_active() no longer tests directly whether a work item can be
  activated. Instead, it's updated to use the return value of
  pwq_activate_first_inactive() to tell whether a work item has been
  activated.

- nr_active decrement and activating the first inactive work item is
  factored into pwq_dec_nr_active().

v3: - WARN_ON_ONCE(!WORK_STRUCT_INACTIVE) added to __pwq_activate_work() as
      now we're calling the function unconditionally from
      pwq_activate_first_inactive().

v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 86 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 67 insertions(+), 19 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 861d8c7d6449a..78b4f4e3e41dd 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1458,11 +1458,14 @@ static bool pwq_is_empty(struct pool_workqueue *pwq)
 static void __pwq_activate_work(struct pool_workqueue *pwq,
 				struct work_struct *work)
 {
+	unsigned long *wdb = work_data_bits(work);
+
+	WARN_ON_ONCE(!(*wdb & WORK_STRUCT_INACTIVE));
 	trace_workqueue_activate_work(work);
 	if (list_empty(&pwq->pool->worklist))
 		pwq->pool->watchdog_ts = jiffies;
 	move_linked_works(work, &pwq->pool->worklist, NULL);
-	__clear_bit(WORK_STRUCT_INACTIVE_BIT, work_data_bits(work));
+	__clear_bit(WORK_STRUCT_INACTIVE_BIT, wdb);
 }
 
 /**
@@ -1487,12 +1490,66 @@ static bool pwq_activate_work(struct pool_workqueue *pwq,
 	return true;
 }
 
-static void pwq_activate_first_inactive(struct pool_workqueue *pwq)
+/**
+ * pwq_tryinc_nr_active - Try to increment nr_active for a pwq
+ * @pwq: pool_workqueue of interest
+ *
+ * Try to increment nr_active for @pwq. Returns %true if an nr_active count is
+ * successfully obtained. %false otherwise.
+ */
+static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
+{
+	struct workqueue_struct *wq = pwq->wq;
+	struct worker_pool *pool = pwq->pool;
+	bool obtained;
+
+	lockdep_assert_held(&pool->lock);
+
+	obtained = pwq->nr_active < READ_ONCE(wq->max_active);
+
+	if (obtained)
+		pwq->nr_active++;
+	return obtained;
+}
+
+/**
+ * pwq_activate_first_inactive - Activate the first inactive work item on a pwq
+ * @pwq: pool_workqueue of interest
+ *
+ * Activate the first inactive work item of @pwq if available and allowed by
+ * max_active limit.
+ *
+ * Returns %true if an inactive work item has been activated. %false if no
+ * inactive work item is found or max_active limit is reached.
+ */
+static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
+{
+	struct work_struct *work =
+		list_first_entry_or_null(&pwq->inactive_works,
+					 struct work_struct, entry);
+
+	if (work && pwq_tryinc_nr_active(pwq)) {
+		__pwq_activate_work(pwq, work);
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/**
+ * pwq_dec_nr_active - Retire an active count
+ * @pwq: pool_workqueue of interest
+ *
+ * Decrement @pwq's nr_active and try to activate the first inactive work item.
+ */
+static void pwq_dec_nr_active(struct pool_workqueue *pwq)
 {
-	struct work_struct *work = list_first_entry(&pwq->inactive_works,
-						    struct work_struct, entry);
+	struct worker_pool *pool = pwq->pool;
 
-	pwq_activate_work(pwq, work);
+	lockdep_assert_held(&pool->lock);
+
+	pwq->nr_active--;
+	pwq_activate_first_inactive(pwq);
 }
 
 /**
@@ -1510,14 +1567,8 @@ static void pwq_dec_nr_in_flight(struct pool_workqueue *pwq, unsigned long work_
 {
 	int color = get_work_color(work_data);
 
-	if (!(work_data & WORK_STRUCT_INACTIVE)) {
-		pwq->nr_active--;
-		if (!list_empty(&pwq->inactive_works)) {
-			/* one down, submit an inactive one */
-			if (pwq->nr_active < READ_ONCE(pwq->wq->max_active))
-				pwq_activate_first_inactive(pwq);
-		}
-	}
+	if (!(work_data & WORK_STRUCT_INACTIVE))
+		pwq_dec_nr_active(pwq);
 
 	pwq->nr_in_flight[color]--;
 
@@ -1819,13 +1870,11 @@ static void __queue_work(int cpu, struct workqueue_struct *wq,
 	 * @work must also queue behind existing inactive work items to maintain
 	 * ordering when max_active changes. See wq_adjust_max_active().
 	 */
-	if (list_empty(&pwq->inactive_works) &&
-	    pwq->nr_active < READ_ONCE(pwq->wq->max_active)) {
+	if (list_empty(&pwq->inactive_works) && pwq_tryinc_nr_active(pwq)) {
 		if (list_empty(&pool->worklist))
 			pool->watchdog_ts = jiffies;
 
 		trace_workqueue_activate_work(work);
-		pwq->nr_active++;
 		insert_work(pwq, work, &pool->worklist, work_flags);
 		kick_pool(pool);
 	} else {
@@ -4687,9 +4736,8 @@ static void wq_adjust_max_active(struct workqueue_struct *wq)
 		/* this function can be called during early boot w/ irq disabled */
 		raw_spin_lock_irqsave(&pwq->pool->lock, flags);
 
-		while (!list_empty(&pwq->inactive_works) &&
-		       pwq->nr_active < wq->max_active)
-			pwq_activate_first_inactive(pwq);
+		while (pwq_activate_first_inactive(pwq))
+			;
 
 		kick_pool(pwq->pool);
 
-- 
2.43.0

[PATCH 6.7 087/713] workqueue: Make wq_adjust_max_active() round-robin pwqs while activating

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit c5404d4e6df6faba1007544b5f4e62c7c14416dd ]

wq_adjust_max_active() needs to activate work items after max_active is
increased. Previously, it did that by visiting each pwq once activating all
that could be activated. While this makes sense with per-pwq nr_active,
nr_active will be shared across multiple pwqs for unbound wqs. Then, we'd
want to round-robin through pwqs to be fairer.

In preparation, this patch makes wq_adjust_max_active() round-robin pwqs
while activating. While the activation ordering changes, this shouldn't
cause user-noticeable behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 78b4f4e3e41dd..059f122563def 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -4710,7 +4710,7 @@ static int init_rescuer(struct workqueue_struct *wq)
  */
 static void wq_adjust_max_active(struct workqueue_struct *wq)
 {
-	struct pool_workqueue *pwq;
+	bool activated;
 
 	lockdep_assert_held(&wq->mutex);
 
@@ -4730,19 +4730,26 @@ static void wq_adjust_max_active(struct workqueue_struct *wq)
 	 */
 	WRITE_ONCE(wq->max_active, wq->saved_max_active);
 
-	for_each_pwq(pwq, wq) {
-		unsigned long flags;
-
-		/* this function can be called during early boot w/ irq disabled */
-		raw_spin_lock_irqsave(&pwq->pool->lock, flags);
-
-		while (pwq_activate_first_inactive(pwq))
-			;
+	/*
+	 * Round-robin through pwq's activating the first inactive work item
+	 * until max_active is filled.
+	 */
+	do {
+		struct pool_workqueue *pwq;
 
-		kick_pool(pwq->pool);
+		activated = false;
+		for_each_pwq(pwq, wq) {
+			unsigned long flags;
 
-		raw_spin_unlock_irqrestore(&pwq->pool->lock, flags);
-	}
+			/* can be called during early boot w/ irq disabled */
+			raw_spin_lock_irqsave(&pwq->pool->lock, flags);
+			if (pwq_activate_first_inactive(pwq)) {
+				activated = true;
+				kick_pool(pwq->pool);
+			}
+			raw_spin_unlock_irqrestore(&pwq->pool->lock, flags);
+		}
+	} while (activated);
 }
 
 __printf(1, 4)
-- 
2.43.0

[PATCH 6.7 088/713] workqueue: RCU protect wq->dfl_pwq and implement accessors for it

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 9f66cff212bb3c1cd25996aaa0dfd0c9e9d8baab ]

wq->cpu_pwq is RCU protected but wq->dfl_pwq isn't. This is okay because
currently wq->dfl_pwq is used only accessed to install it into wq->cpu_pwq
which doesn't require RCU access. However, we want to be able to access
wq->dfl_pwq under RCU in the future to access its __pod_cpumask and the code
can be made easier to read by making the two pwq fields behave in the same
way.

- Make wq->dfl_pwq RCU protected.

- Add unbound_pwq_slot() and unbound_pwq() which can access both ->dfl_pwq
  and ->cpu_pwq. The former returns the double pointer that can be used
  access and update the pwqs. The latter performs locking check and
  dereferences the double pointer.

- pwq accesses and updates are converted to use unbound_pwq[_slot]().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 64 +++++++++++++++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 24 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 059f122563def..53bebd8c8b457 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -304,7 +304,7 @@ struct workqueue_struct {
 	int			saved_max_active; /* WQ: saved max_active */
 
 	struct workqueue_attrs	*unbound_attrs;	/* PW: only for unbound wqs */
-	struct pool_workqueue	*dfl_pwq;	/* PW: only for unbound wqs */
+	struct pool_workqueue __rcu *dfl_pwq;   /* PW: only for unbound wqs */
 
 #ifdef CONFIG_SYSFS
 	struct wq_device	*wq_dev;	/* I: for sysfs interface */
@@ -629,6 +629,23 @@ static int worker_pool_assign_id(struct worker_pool *pool)
 	return ret;
 }
 
+static struct pool_workqueue __rcu **
+unbound_pwq_slot(struct workqueue_struct *wq, int cpu)
+{
+       if (cpu >= 0)
+               return per_cpu_ptr(wq->cpu_pwq, cpu);
+       else
+               return &wq->dfl_pwq;
+}
+
+/* @cpu < 0 for dfl_pwq */
+static struct pool_workqueue *unbound_pwq(struct workqueue_struct *wq, int cpu)
+{
+	return rcu_dereference_check(*unbound_pwq_slot(wq, cpu),
+				     lockdep_is_held(&wq_pool_mutex) ||
+				     lockdep_is_held(&wq->mutex));
+}
+
 static unsigned int work_color_to_flags(int color)
 {
 	return color << WORK_STRUCT_COLOR_SHIFT;
@@ -4318,10 +4335,11 @@ static void wq_calc_pod_cpumask(struct workqueue_attrs *attrs, int cpu,
 				"possible intersect\n");
 }
 
-/* install @pwq into @wq's cpu_pwq and return the old pwq */
+/* install @pwq into @wq and return the old pwq, @cpu < 0 for dfl_pwq */
 static struct pool_workqueue *install_unbound_pwq(struct workqueue_struct *wq,
 					int cpu, struct pool_workqueue *pwq)
 {
+	struct pool_workqueue __rcu **slot = unbound_pwq_slot(wq, cpu);
 	struct pool_workqueue *old_pwq;
 
 	lockdep_assert_held(&wq_pool_mutex);
@@ -4330,8 +4348,8 @@ static struct pool_workqueue *install_unbound_pwq(struct workqueue_struct *wq,
 	/* link_pwq() can handle duplicate calls */
 	link_pwq(pwq);
 
-	old_pwq = rcu_access_pointer(*per_cpu_ptr(wq->cpu_pwq, cpu));
-	rcu_assign_pointer(*per_cpu_ptr(wq->cpu_pwq, cpu), pwq);
+	old_pwq = rcu_access_pointer(*slot);
+	rcu_assign_pointer(*slot, pwq);
 	return old_pwq;
 }
 
@@ -4431,14 +4449,11 @@ static void apply_wqattrs_commit(struct apply_wqattrs_ctx *ctx)
 
 	copy_workqueue_attrs(ctx->wq->unbound_attrs, ctx->attrs);
 
-	/* save the previous pwq and install the new one */
+	/* save the previous pwqs and install the new ones */
 	for_each_possible_cpu(cpu)
 		ctx->pwq_tbl[cpu] = install_unbound_pwq(ctx->wq, cpu,
 							ctx->pwq_tbl[cpu]);
-
-	/* @dfl_pwq might not have been used, ensure it's linked */
-	link_pwq(ctx->dfl_pwq);
-	swap(ctx->wq->dfl_pwq, ctx->dfl_pwq);
+	ctx->dfl_pwq = install_unbound_pwq(ctx->wq, -1, ctx->dfl_pwq);
 
 	mutex_unlock(&ctx->wq->mutex);
 }
@@ -4561,9 +4576,7 @@ static void wq_update_pod(struct workqueue_struct *wq, int cpu,
 
 	/* nothing to do if the target cpumask matches the current pwq */
 	wq_calc_pod_cpumask(target_attrs, cpu, off_cpu);
-	pwq = rcu_dereference_protected(*per_cpu_ptr(wq->cpu_pwq, cpu),
-					lockdep_is_held(&wq_pool_mutex));
-	if (wqattrs_equal(target_attrs, pwq->pool->attrs))
+	if (wqattrs_equal(target_attrs, unbound_pwq(wq, cpu)->pool->attrs))
 		return;
 
 	/* create a new pwq */
@@ -4581,10 +4594,11 @@ static void wq_update_pod(struct workqueue_struct *wq, int cpu,
 
 use_dfl_pwq:
 	mutex_lock(&wq->mutex);
-	raw_spin_lock_irq(&wq->dfl_pwq->pool->lock);
-	get_pwq(wq->dfl_pwq);
-	raw_spin_unlock_irq(&wq->dfl_pwq->pool->lock);
-	old_pwq = install_unbound_pwq(wq, cpu, wq->dfl_pwq);
+	pwq = unbound_pwq(wq, -1);
+	raw_spin_lock_irq(&pwq->pool->lock);
+	get_pwq(pwq);
+	raw_spin_unlock_irq(&pwq->pool->lock);
+	old_pwq = install_unbound_pwq(wq, cpu, pwq);
 out_unlock:
 	mutex_unlock(&wq->mutex);
 	put_pwq_unlocked(old_pwq);
@@ -4622,10 +4636,13 @@ static int alloc_and_link_pwqs(struct workqueue_struct *wq)
 
 	cpus_read_lock();
 	if (wq->flags & __WQ_ORDERED) {
+		struct pool_workqueue *dfl_pwq;
+
 		ret = apply_workqueue_attrs(wq, ordered_wq_attrs[highpri]);
 		/* there should only be single pwq for ordering guarantee */
-		WARN(!ret && (wq->pwqs.next != &wq->dfl_pwq->pwqs_node ||
-			      wq->pwqs.prev != &wq->dfl_pwq->pwqs_node),
+		dfl_pwq = rcu_access_pointer(wq->dfl_pwq);
+		WARN(!ret && (wq->pwqs.next != &dfl_pwq->pwqs_node ||
+			      wq->pwqs.prev != &dfl_pwq->pwqs_node),
 		     "ordering guarantee broken for workqueue %s\n", wq->name);
 	} else {
 		ret = apply_workqueue_attrs(wq, unbound_std_wq_attrs[highpri]);
@@ -4856,7 +4873,7 @@ static bool pwq_busy(struct pool_workqueue *pwq)
 		if (pwq->nr_in_flight[i])
 			return true;
 
-	if ((pwq != pwq->wq->dfl_pwq) && (pwq->refcnt > 1))
+	if ((pwq != rcu_access_pointer(pwq->wq->dfl_pwq)) && (pwq->refcnt > 1))
 		return true;
 	if (!pwq_is_empty(pwq))
 		return true;
@@ -4940,13 +4957,12 @@ void destroy_workqueue(struct workqueue_struct *wq)
 	rcu_read_lock();
 
 	for_each_possible_cpu(cpu) {
-		pwq = rcu_access_pointer(*per_cpu_ptr(wq->cpu_pwq, cpu));
-		RCU_INIT_POINTER(*per_cpu_ptr(wq->cpu_pwq, cpu), NULL);
-		put_pwq_unlocked(pwq);
+		put_pwq_unlocked(unbound_pwq(wq, cpu));
+		RCU_INIT_POINTER(*unbound_pwq_slot(wq, cpu), NULL);
 	}
 
-	put_pwq_unlocked(wq->dfl_pwq);
-	wq->dfl_pwq = NULL;
+	put_pwq_unlocked(unbound_pwq(wq, -1));
+	RCU_INIT_POINTER(*unbound_pwq_slot(wq, -1), NULL);
 
 	rcu_read_unlock();
 }
-- 
2.43.0

[PATCH 6.7 089/713] workqueue: Introduce struct wq_node_nr_active

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 91ccc6e7233bb10a9c176aa4cc70d6f432a441a5 ]

Currently, for both percpu and unbound workqueues, max_active applies
per-cpu, which is a recent change for unbound workqueues. The change for
unbound workqueues was a significant departure from the previous behavior of
per-node application. It made some use cases create undesirable number of
concurrent work items and left no good way of fixing them. To address the
problem, workqueue is implementing a NUMA node segmented global nr_active
mechanism, which will be explained further in the next patch.

As a preparation, this patch introduces struct wq_node_nr_active. It's a
data structured allocated for each workqueue and NUMA node pair and
currently only tracks the workqueue's number of active work items on the
node. This is split out from the next patch to make it easier to understand
and review.

Note that there is an extra wq_node_nr_active allocated for the invalid node
nr_node_ids which is used to track nr_active for pools which don't have NUMA
node associated such as the default fallback system-wide pool.

This doesn't cause any behavior changes visible to userland yet. The next
patch will expand to implement the control mechanism on top.

v4: - Fixed out-of-bound access when freeing per-cpu workqueues.

v3: - Use flexible array for wq->node_nr_active as suggested by Lai.

v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.

    - Lai pointed out that pwq_tryinc_nr_active() incorrectly dropped
      pwq->max_active check. Restored. As the next patch replaces the
      max_active enforcement mechanism, this doesn't change the end result.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Stable-dep-of: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 142 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 135 insertions(+), 7 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 53bebd8c8b457..be1fc91b9851c 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -280,6 +280,16 @@ struct wq_flusher {
 
 struct wq_device;
 
+/*
+ * Unlike in a per-cpu workqueue where max_active limits its concurrency level
+ * on each CPU, in an unbound workqueue, max_active applies to the whole system.
+ * As sharing a single nr_active across multiple sockets can be very expensive,
+ * the counting and enforcement is per NUMA node.
+ */
+struct wq_node_nr_active {
+	atomic_t		nr;		/* per-node nr_active count */
+};
+
 /*
  * The externally visible workqueue.  It relays the issued work items to
  * the appropriate worker_pool through its pool_workqueues.
@@ -326,6 +336,7 @@ struct workqueue_struct {
 	/* hot fields used during command issue, aligned to cacheline */
 	unsigned int		flags ____cacheline_aligned; /* WQ: WQ_* flags */
 	struct pool_workqueue __percpu __rcu **cpu_pwq; /* I: per-cpu pwqs */
+	struct wq_node_nr_active *node_nr_active[]; /* I: per-node nr_active */
 };
 
 static struct kmem_cache *pwq_cache;
@@ -1415,6 +1426,31 @@ work_func_t wq_worker_last_func(struct task_struct *task)
 	return worker->last_func;
 }
 
+/**
+ * wq_node_nr_active - Determine wq_node_nr_active to use
+ * @wq: workqueue of interest
+ * @node: NUMA node, can be %NUMA_NO_NODE
+ *
+ * Determine wq_node_nr_active to use for @wq on @node. Returns:
+ *
+ * - %NULL for per-cpu workqueues as they don't need to use shared nr_active.
+ *
+ * - node_nr_active[nr_node_ids] if @node is %NUMA_NO_NODE.
+ *
+ * - Otherwise, node_nr_active[@node].
+ */
+static struct wq_node_nr_active *wq_node_nr_active(struct workqueue_struct *wq,
+						   int node)
+{
+	if (!(wq->flags & WQ_UNBOUND))
+		return NULL;
+
+	if (node == NUMA_NO_NODE)
+		node = nr_node_ids;
+
+	return wq->node_nr_active[node];
+}
+
 /**
  * get_pwq - get an extra reference on the specified pool_workqueue
  * @pwq: pool_workqueue to get
@@ -1496,12 +1532,17 @@ static bool pwq_activate_work(struct pool_workqueue *pwq,
 			      struct work_struct *work)
 {
 	struct worker_pool *pool = pwq->pool;
+	struct wq_node_nr_active *nna;
 
 	lockdep_assert_held(&pool->lock);
 
 	if (!(*work_data_bits(work) & WORK_STRUCT_INACTIVE))
 		return false;
 
+	nna = wq_node_nr_active(pwq->wq, pool->node);
+	if (nna)
+		atomic_inc(&nna->nr);
+
 	pwq->nr_active++;
 	__pwq_activate_work(pwq, work);
 	return true;
@@ -1518,14 +1559,18 @@ static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
 {
 	struct workqueue_struct *wq = pwq->wq;
 	struct worker_pool *pool = pwq->pool;
+	struct wq_node_nr_active *nna = wq_node_nr_active(wq, pool->node);
 	bool obtained;
 
 	lockdep_assert_held(&pool->lock);
 
 	obtained = pwq->nr_active < READ_ONCE(wq->max_active);
 
-	if (obtained)
+	if (obtained) {
 		pwq->nr_active++;
+		if (nna)
+			atomic_inc(&nna->nr);
+	}
 	return obtained;
 }
 
@@ -1562,10 +1607,26 @@ static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
 static void pwq_dec_nr_active(struct pool_workqueue *pwq)
 {
 	struct worker_pool *pool = pwq->pool;
+	struct wq_node_nr_active *nna = wq_node_nr_active(pwq->wq, pool->node);
 
 	lockdep_assert_held(&pool->lock);
 
+	/*
+	 * @pwq->nr_active should be decremented for both percpu and unbound
+	 * workqueues.
+	 */
 	pwq->nr_active--;
+
+	/*
+	 * For a percpu workqueue, it's simple. Just need to kick the first
+	 * inactive work item on @pwq itself.
+	 */
+	if (!nna) {
+		pwq_activate_first_inactive(pwq);
+		return;
+	}
+
+	atomic_dec(&nna->nr);
 	pwq_activate_first_inactive(pwq);
 }
 
@@ -4020,11 +4081,63 @@ static void wq_free_lockdep(struct workqueue_struct *wq)
 }
 #endif
 
+static void free_node_nr_active(struct wq_node_nr_active **nna_ar)
+{
+	int node;
+
+	for_each_node(node) {
+		kfree(nna_ar[node]);
+		nna_ar[node] = NULL;
+	}
+
+	kfree(nna_ar[nr_node_ids]);
+	nna_ar[nr_node_ids] = NULL;
+}
+
+static void init_node_nr_active(struct wq_node_nr_active *nna)
+{
+	atomic_set(&nna->nr, 0);
+}
+
+/*
+ * Each node's nr_active counter will be accessed mostly from its own node and
+ * should be allocated in the node.
+ */
+static int alloc_node_nr_active(struct wq_node_nr_active **nna_ar)
+{
+	struct wq_node_nr_active *nna;
+	int node;
+
+	for_each_node(node) {
+		nna = kzalloc_node(sizeof(*nna), GFP_KERNEL, node);
+		if (!nna)
+			goto err_free;
+		init_node_nr_active(nna);
+		nna_ar[node] = nna;
+	}
+
+	/* [nr_node_ids] is used as the fallback */
+	nna = kzalloc_node(sizeof(*nna), GFP_KERNEL, NUMA_NO_NODE);
+	if (!nna)
+		goto err_free;
+	init_node_nr_active(nna);
+	nna_ar[nr_node_ids] = nna;
+
+	return 0;
+
+err_free:
+	free_node_nr_active(nna_ar);
+	return -ENOMEM;
+}
+
 static void rcu_free_wq(struct rcu_head *rcu)
 {
 	struct workqueue_struct *wq =
 		container_of(rcu, struct workqueue_struct, rcu);
 
+	if (wq->flags & WQ_UNBOUND)
+		free_node_nr_active(wq->node_nr_active);
+
 	wq_free_lockdep(wq);
 	free_percpu(wq->cpu_pwq);
 	free_workqueue_attrs(wq->unbound_attrs);
@@ -4776,7 +4889,8 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 {
 	va_list args;
 	struct workqueue_struct *wq;
-	int len;
+	size_t wq_size;
+	int name_len;
 
 	/*
 	 * Unbound && max_active == 1 used to imply ordered, which is no longer
@@ -4792,7 +4906,12 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 		flags |= WQ_UNBOUND;
 
 	/* allocate wq and format name */
-	wq = kzalloc(sizeof(*wq), GFP_KERNEL);
+	if (flags & WQ_UNBOUND)
+		wq_size = struct_size(wq, node_nr_active, nr_node_ids + 1);
+	else
+		wq_size = sizeof(*wq);
+
+	wq = kzalloc(wq_size, GFP_KERNEL);
 	if (!wq)
 		return NULL;
 
@@ -4803,11 +4922,12 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	}
 
 	va_start(args, max_active);
-	len = vsnprintf(wq->name, sizeof(wq->name), fmt, args);
+	name_len = vsnprintf(wq->name, sizeof(wq->name), fmt, args);
 	va_end(args);
 
-	if (len >= WQ_NAME_LEN)
-		pr_warn_once("workqueue: name exceeds WQ_NAME_LEN. Truncating to: %s\n", wq->name);
+	if (name_len >= WQ_NAME_LEN)
+		pr_warn_once("workqueue: name exceeds WQ_NAME_LEN. Truncating to: %s\n",
+			     wq->name);
 
 	max_active = max_active ?: WQ_DFL_ACTIVE;
 	max_active = wq_clamp_max_active(max_active, flags, wq->name);
@@ -4826,8 +4946,13 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	wq_init_lockdep(wq);
 	INIT_LIST_HEAD(&wq->list);
 
+	if (flags & WQ_UNBOUND) {
+		if (alloc_node_nr_active(wq->node_nr_active) < 0)
+			goto err_unreg_lockdep;
+	}
+
 	if (alloc_and_link_pwqs(wq) < 0)
-		goto err_unreg_lockdep;
+		goto err_free_node_nr_active;
 
 	if (wq_online && init_rescuer(wq) < 0)
 		goto err_destroy;
@@ -4852,6 +4977,9 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 
 	return wq;
 
+err_free_node_nr_active:
+	if (wq->flags & WQ_UNBOUND)
+		free_node_nr_active(wq->node_nr_active);
 err_unreg_lockdep:
 	wq_unregister_lockdep(wq);
 	wq_free_lockdep(wq);
-- 
2.43.0

[PATCH 6.7 090/713] workqueue: Implement system-wide nr_active enforcement for unbound workqueues

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 5797b1c18919cd9c289ded7954383e499f729ce0 ]

A pool_workqueue (pwq) represents the connection between a workqueue and a
worker_pool. One of the roles that a pwq plays is enforcement of the
max_active concurrency limit. Before 636b927eba5b ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues"), there was one pwq per each CPU
for per-cpu workqueues and per each NUMA node for unbound workqueues, which
was a natural result of per-cpu workqueues being served by per-cpu pools and
unbound by per-NUMA pools.

In terms of max_active enforcement, this was, while not perfect, workable.
For per-cpu workqueues, it was fine. For unbound, it wasn't great in that
NUMA machines would get max_active that's multiplied by the number of nodes
but didn't cause huge problems because NUMA machines are relatively rare and
the node count is usually pretty low.

However, cache layouts are more complex now and sharing a worker pool across
a whole node didn't really work well for unbound workqueues. Thus, a series
of commits culminating on 8639ecebc9b1 ("workqueue: Make unbound workqueues
to use per-cpu pool_workqueues") implemented more flexible affinity
mechanism for unbound workqueues which enables using e.g. last-level-cache
aligned pools. In the process, 636b927eba5b ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues") made unbound workqueues use
per-cpu pwqs like per-cpu workqueues.

While the change was necessary to enable more flexible affinity scopes, this
came with the side effect of blowing up the effective max_active for unbound
workqueues. Before, the effective max_active for unbound workqueues was
multiplied by the number of nodes. After, by the number of CPUs.

636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") claims that this should generally be okay. It is okay for
users which self-regulates concurrency level which are the vast majority;
however, there are enough use cases which actually depend on max_active to
prevent the level of concurrency from going bonkers including several IO
handling workqueues that can issue a work item for each in-flight IO. With
targeted benchmarks, the misbehavior can easily be exposed as reported in
http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3.

Unfortunately, there is no way to express what these use cases need using
per-cpu max_active. A CPU may issue most of in-flight IOs, so we don't want
to set max_active too low but as soon as we increase max_active a bit, we
can end up with unreasonable number of in-flight work items when many CPUs
issue IOs at the same time. ie. The acceptable lowest max_active is higher
than the acceptable highest max_active.

Ideally, max_active for an unbound workqueue should be system-wide so that
the users can regulate the total level of concurrency regardless of node and
cache layout. The reasons workqueue hasn't implemented that yet are:

- One max_active enforcement decouples from pool boundaires, chaining
  execution after a work item finishes requires inter-pool operations which
  would require lock dancing, which is nasty.

- Sharing a single nr_active count across the whole system can be pretty
  expensive on NUMA machines.

- Per-pwq enforcement had been more or less okay while we were using
  per-node pools.

It looks like we no longer can avoid decoupling max_active enforcement from
pool boundaries. This patch implements system-wide nr_active mechanism with
the following design characteristics:

- To avoid sharing a single counter across multiple nodes, the configured
  max_active is split across nodes according to the proportion of each
  workqueue's online effective CPUs per node. e.g. A node with twice more
  online effective CPUs will get twice higher portion of max_active.

- Workqueue used to be able to process a chain of interdependent work items
  which is as long as max_active. We can't do this anymore as max_active is
  distributed across the nodes. Instead, a new parameter min_active is
  introduced which determines the minimum level of concurrency within a node
  regardless of how max_active distribution comes out to be.

  It is set to the smaller of max_active and WQ_DFL_MIN_ACTIVE which is 8.
  This can lead to higher effective max_weight than configured and also
  deadlocks if a workqueue was depending on being able to handle chains of
  interdependent work items that are longer than 8.

  I believe these should be fine given that the number of CPUs in each NUMA
  node is usually higher than 8 and work item chain longer than 8 is pretty
  unlikely. However, if these assumptions turn out to be wrong, we'll need
  to add an interface to adjust min_active.

- Each unbound wq has an array of struct wq_node_nr_active which tracks
  per-node nr_active. When its pwq wants to run a work item, it has to
  obtain the matching node's nr_active. If over the node's max_active, the
  pwq is queued on wq_node_nr_active->pending_pwqs. As work items finish,
  the completion path round-robins the pending pwqs activating the first
  inactive work item of each, which involves some pool lock dancing and
  kicking other pools. It's not the simplest code but doesn't look too bad.

v4: - wq_adjust_max_active() updated to invoke wq_update_node_max_active().

    - wq_adjust_max_active() is now protected by wq->mutex instead of
      wq_pool_mutex.

v3: - wq_node_max_active() used to calculate per-node max_active on the fly
      based on system-wide CPU online states. Lai pointed out that this can
      lead to skewed distributions for workqueues with restricted cpumasks.
      Update the max_active distribution to use per-workqueue effective
      online CPU counts instead of system-wide and cache the calculation
      results in node_nr_active->max.

v2: - wq->min/max_active now uses WRITE/READ_ONCE() as suggested by Lai.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naohiro Aota <Naohiro.Aota@wdc.com>
Link: http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3
Fixes: 636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/workqueue.h |  35 +++-
 kernel/workqueue.c        | 341 ++++++++++++++++++++++++++++++++++----
 2 files changed, 341 insertions(+), 35 deletions(-)

diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 24b1e5070f4d4..ad97453e7c3a3 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -405,6 +405,13 @@ enum {
 	WQ_MAX_ACTIVE		= 512,	  /* I like 512, better ideas? */
 	WQ_UNBOUND_MAX_ACTIVE	= WQ_MAX_ACTIVE,
 	WQ_DFL_ACTIVE		= WQ_MAX_ACTIVE / 2,
+
+	/*
+	 * Per-node default cap on min_active. Unless explicitly set, min_active
+	 * is set to min(max_active, WQ_DFL_MIN_ACTIVE). For more details, see
+	 * workqueue_struct->min_active definition.
+	 */
+	WQ_DFL_MIN_ACTIVE	= 8,
 };
 
 /*
@@ -447,11 +454,33 @@ extern struct workqueue_struct *system_freezable_power_efficient_wq;
  * alloc_workqueue - allocate a workqueue
  * @fmt: printf format for the name of the workqueue
  * @flags: WQ_* flags
- * @max_active: max in-flight work items per CPU, 0 for default
+ * @max_active: max in-flight work items, 0 for default
  * remaining args: args for @fmt
  *
- * Allocate a workqueue with the specified parameters.  For detailed
- * information on WQ_* flags, please refer to
+ * For a per-cpu workqueue, @max_active limits the number of in-flight work
+ * items for each CPU. e.g. @max_active of 1 indicates that each CPU can be
+ * executing at most one work item for the workqueue.
+ *
+ * For unbound workqueues, @max_active limits the number of in-flight work items
+ * for the whole system. e.g. @max_active of 16 indicates that that there can be
+ * at most 16 work items executing for the workqueue in the whole system.
+ *
+ * As sharing the same active counter for an unbound workqueue across multiple
+ * NUMA nodes can be expensive, @max_active is distributed to each NUMA node
+ * according to the proportion of the number of online CPUs and enforced
+ * independently.
+ *
+ * Depending on online CPU distribution, a node may end up with per-node
+ * max_active which is significantly lower than @max_active, which can lead to
+ * deadlocks if the per-node concurrency limit is lower than the maximum number
+ * of interdependent work items for the workqueue.
+ *
+ * To guarantee forward progress regardless of online CPU distribution, the
+ * concurrency limit on every node is guaranteed to be equal to or greater than
+ * min_active which is set to min(@max_active, %WQ_DFL_MIN_ACTIVE). This means
+ * that the sum of per-node max_active's may be larger than @max_active.
+ *
+ * For detailed information on %WQ_* flags, please refer to
  * Documentation/core-api/workqueue.rst.
  *
  * RETURNS:
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index be1fc91b9851c..6b18926cf3523 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -122,6 +122,9 @@ enum {
  *
  * L: pool->lock protected.  Access with pool->lock held.
  *
+ * LN: pool->lock and wq_node_nr_active->lock protected for writes. Either for
+ *     reads.
+ *
  * K: Only modified by worker while holding pool->lock. Can be safely read by
  *    self, while holding pool->lock or from IRQ context if %current is the
  *    kworker.
@@ -243,17 +246,18 @@ struct pool_workqueue {
 	 * pwq->inactive_works instead of pool->worklist and marked with
 	 * WORK_STRUCT_INACTIVE.
 	 *
-	 * All work items marked with WORK_STRUCT_INACTIVE do not participate
-	 * in pwq->nr_active and all work items in pwq->inactive_works are
-	 * marked with WORK_STRUCT_INACTIVE.  But not all WORK_STRUCT_INACTIVE
-	 * work items are in pwq->inactive_works.  Some of them are ready to
-	 * run in pool->worklist or worker->scheduled.  Those work itmes are
-	 * only struct wq_barrier which is used for flush_work() and should
-	 * not participate in pwq->nr_active.  For non-barrier work item, it
-	 * is marked with WORK_STRUCT_INACTIVE iff it is in pwq->inactive_works.
+	 * All work items marked with WORK_STRUCT_INACTIVE do not participate in
+	 * nr_active and all work items in pwq->inactive_works are marked with
+	 * WORK_STRUCT_INACTIVE. But not all WORK_STRUCT_INACTIVE work items are
+	 * in pwq->inactive_works. Some of them are ready to run in
+	 * pool->worklist or worker->scheduled. Those work itmes are only struct
+	 * wq_barrier which is used for flush_work() and should not participate
+	 * in nr_active. For non-barrier work item, it is marked with
+	 * WORK_STRUCT_INACTIVE iff it is in pwq->inactive_works.
 	 */
 	int			nr_active;	/* L: nr of active works */
 	struct list_head	inactive_works;	/* L: inactive works */
+	struct list_head	pending_node;	/* LN: node on wq_node_nr_active->pending_pwqs */
 	struct list_head	pwqs_node;	/* WR: node on wq->pwqs */
 	struct list_head	mayday_node;	/* MD: node on wq->maydays */
 
@@ -285,9 +289,19 @@ struct wq_device;
  * on each CPU, in an unbound workqueue, max_active applies to the whole system.
  * As sharing a single nr_active across multiple sockets can be very expensive,
  * the counting and enforcement is per NUMA node.
+ *
+ * The following struct is used to enforce per-node max_active. When a pwq wants
+ * to start executing a work item, it should increment ->nr using
+ * tryinc_node_nr_active(). If acquisition fails due to ->nr already being over
+ * ->max, the pwq is queued on ->pending_pwqs. As in-flight work items finish
+ * and decrement ->nr, node_activate_pending_pwq() activates the pending pwqs in
+ * round-robin order.
  */
 struct wq_node_nr_active {
-	atomic_t		nr;		/* per-node nr_active count */
+	int			max;		/* per-node max_active */
+	atomic_t		nr;		/* per-node nr_active */
+	raw_spinlock_t		lock;		/* nests inside pool locks */
+	struct list_head	pending_pwqs;	/* LN: pwqs with inactive works */
 };
 
 /*
@@ -310,8 +324,12 @@ struct workqueue_struct {
 	struct worker		*rescuer;	/* MD: rescue worker */
 
 	int			nr_drainers;	/* WQ: drain in progress */
+
+	/* See alloc_workqueue() function comment for info on min/max_active */
 	int			max_active;	/* WO: max active works */
+	int			min_active;	/* WO: min active works */
 	int			saved_max_active; /* WQ: saved max_active */
+	int			saved_min_active; /* WQ: saved min_active */
 
 	struct workqueue_attrs	*unbound_attrs;	/* PW: only for unbound wqs */
 	struct pool_workqueue __rcu *dfl_pwq;   /* PW: only for unbound wqs */
@@ -657,6 +675,19 @@ static struct pool_workqueue *unbound_pwq(struct workqueue_struct *wq, int cpu)
 				     lockdep_is_held(&wq->mutex));
 }
 
+/**
+ * unbound_effective_cpumask - effective cpumask of an unbound workqueue
+ * @wq: workqueue of interest
+ *
+ * @wq->unbound_attrs->cpumask contains the cpumask requested by the user which
+ * is masked with wq_unbound_cpumask to determine the effective cpumask. The
+ * default pwq is always mapped to the pool with the current effective cpumask.
+ */
+static struct cpumask *unbound_effective_cpumask(struct workqueue_struct *wq)
+{
+	return unbound_pwq(wq, -1)->pool->attrs->__pod_cpumask;
+}
+
 static unsigned int work_color_to_flags(int color)
 {
 	return color << WORK_STRUCT_COLOR_SHIFT;
@@ -1451,6 +1482,46 @@ static struct wq_node_nr_active *wq_node_nr_active(struct workqueue_struct *wq,
 	return wq->node_nr_active[node];
 }
 
+/**
+ * wq_update_node_max_active - Update per-node max_actives to use
+ * @wq: workqueue to update
+ * @off_cpu: CPU that's going down, -1 if a CPU is not going down
+ *
+ * Update @wq->node_nr_active[]->max. @wq must be unbound. max_active is
+ * distributed among nodes according to the proportions of numbers of online
+ * cpus. The result is always between @wq->min_active and max_active.
+ */
+static void wq_update_node_max_active(struct workqueue_struct *wq, int off_cpu)
+{
+	struct cpumask *effective = unbound_effective_cpumask(wq);
+	int min_active = READ_ONCE(wq->min_active);
+	int max_active = READ_ONCE(wq->max_active);
+	int total_cpus, node;
+
+	lockdep_assert_held(&wq->mutex);
+
+	if (!cpumask_test_cpu(off_cpu, effective))
+		off_cpu = -1;
+
+	total_cpus = cpumask_weight_and(effective, cpu_online_mask);
+	if (off_cpu >= 0)
+		total_cpus--;
+
+	for_each_node(node) {
+		int node_cpus;
+
+		node_cpus = cpumask_weight_and(effective, cpumask_of_node(node));
+		if (off_cpu >= 0 && cpu_to_node(off_cpu) == node)
+			node_cpus--;
+
+		wq_node_nr_active(wq, node)->max =
+			clamp(DIV_ROUND_UP(max_active * node_cpus, total_cpus),
+			      min_active, max_active);
+	}
+
+	wq_node_nr_active(wq, NUMA_NO_NODE)->max = min_active;
+}
+
 /**
  * get_pwq - get an extra reference on the specified pool_workqueue
  * @pwq: pool_workqueue to get
@@ -1548,35 +1619,98 @@ static bool pwq_activate_work(struct pool_workqueue *pwq,
 	return true;
 }
 
+static bool tryinc_node_nr_active(struct wq_node_nr_active *nna)
+{
+	int max = READ_ONCE(nna->max);
+
+	while (true) {
+		int old, tmp;
+
+		old = atomic_read(&nna->nr);
+		if (old >= max)
+			return false;
+		tmp = atomic_cmpxchg_relaxed(&nna->nr, old, old + 1);
+		if (tmp == old)
+			return true;
+	}
+}
+
 /**
  * pwq_tryinc_nr_active - Try to increment nr_active for a pwq
  * @pwq: pool_workqueue of interest
+ * @fill: max_active may have increased, try to increase concurrency level
  *
  * Try to increment nr_active for @pwq. Returns %true if an nr_active count is
  * successfully obtained. %false otherwise.
  */
-static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
+static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq, bool fill)
 {
 	struct workqueue_struct *wq = pwq->wq;
 	struct worker_pool *pool = pwq->pool;
 	struct wq_node_nr_active *nna = wq_node_nr_active(wq, pool->node);
-	bool obtained;
+	bool obtained = false;
 
 	lockdep_assert_held(&pool->lock);
 
-	obtained = pwq->nr_active < READ_ONCE(wq->max_active);
+	if (!nna) {
+		/* per-cpu workqueue, pwq->nr_active is sufficient */
+		obtained = pwq->nr_active < READ_ONCE(wq->max_active);
+		goto out;
+	}
+
+	/*
+	 * Unbound workqueue uses per-node shared nr_active $nna. If @pwq is
+	 * already waiting on $nna, pwq_dec_nr_active() will maintain the
+	 * concurrency level. Don't jump the line.
+	 *
+	 * We need to ignore the pending test after max_active has increased as
+	 * pwq_dec_nr_active() can only maintain the concurrency level but not
+	 * increase it. This is indicated by @fill.
+	 */
+	if (!list_empty(&pwq->pending_node) && likely(!fill))
+		goto out;
+
+	obtained = tryinc_node_nr_active(nna);
+	if (obtained)
+		goto out;
+
+	/*
+	 * Lockless acquisition failed. Lock, add ourself to $nna->pending_pwqs
+	 * and try again. The smp_mb() is paired with the implied memory barrier
+	 * of atomic_dec_return() in pwq_dec_nr_active() to ensure that either
+	 * we see the decremented $nna->nr or they see non-empty
+	 * $nna->pending_pwqs.
+	 */
+	raw_spin_lock(&nna->lock);
+
+	if (list_empty(&pwq->pending_node))
+		list_add_tail(&pwq->pending_node, &nna->pending_pwqs);
+	else if (likely(!fill))
+		goto out_unlock;
+
+	smp_mb();
+
+	obtained = tryinc_node_nr_active(nna);
 
-	if (obtained) {
+	/*
+	 * If @fill, @pwq might have already been pending. Being spuriously
+	 * pending in cold paths doesn't affect anything. Let's leave it be.
+	 */
+	if (obtained && likely(!fill))
+		list_del_init(&pwq->pending_node);
+
+out_unlock:
+	raw_spin_unlock(&nna->lock);
+out:
+	if (obtained)
 		pwq->nr_active++;
-		if (nna)
-			atomic_inc(&nna->nr);
-	}
 	return obtained;
 }
 
 /**
  * pwq_activate_first_inactive - Activate the first inactive work item on a pwq
  * @pwq: pool_workqueue of interest
+ * @fill: max_active may have increased, try to increase concurrency level
  *
  * Activate the first inactive work item of @pwq if available and allowed by
  * max_active limit.
@@ -1584,13 +1718,13 @@ static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
  * Returns %true if an inactive work item has been activated. %false if no
  * inactive work item is found or max_active limit is reached.
  */
-static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
+static bool pwq_activate_first_inactive(struct pool_workqueue *pwq, bool fill)
 {
 	struct work_struct *work =
 		list_first_entry_or_null(&pwq->inactive_works,
 					 struct work_struct, entry);
 
-	if (work && pwq_tryinc_nr_active(pwq)) {
+	if (work && pwq_tryinc_nr_active(pwq, fill)) {
 		__pwq_activate_work(pwq, work);
 		return true;
 	} else {
@@ -1598,11 +1732,93 @@ static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
 	}
 }
 
+/**
+ * node_activate_pending_pwq - Activate a pending pwq on a wq_node_nr_active
+ * @nna: wq_node_nr_active to activate a pending pwq for
+ * @caller_pool: worker_pool the caller is locking
+ *
+ * Activate a pwq in @nna->pending_pwqs. Called with @caller_pool locked.
+ * @caller_pool may be unlocked and relocked to lock other worker_pools.
+ */
+static void node_activate_pending_pwq(struct wq_node_nr_active *nna,
+				      struct worker_pool *caller_pool)
+{
+	struct worker_pool *locked_pool = caller_pool;
+	struct pool_workqueue *pwq;
+	struct work_struct *work;
+
+	lockdep_assert_held(&caller_pool->lock);
+
+	raw_spin_lock(&nna->lock);
+retry:
+	pwq = list_first_entry_or_null(&nna->pending_pwqs,
+				       struct pool_workqueue, pending_node);
+	if (!pwq)
+		goto out_unlock;
+
+	/*
+	 * If @pwq is for a different pool than @locked_pool, we need to lock
+	 * @pwq->pool->lock. Let's trylock first. If unsuccessful, do the unlock
+	 * / lock dance. For that, we also need to release @nna->lock as it's
+	 * nested inside pool locks.
+	 */
+	if (pwq->pool != locked_pool) {
+		raw_spin_unlock(&locked_pool->lock);
+		locked_pool = pwq->pool;
+		if (!raw_spin_trylock(&locked_pool->lock)) {
+			raw_spin_unlock(&nna->lock);
+			raw_spin_lock(&locked_pool->lock);
+			raw_spin_lock(&nna->lock);
+			goto retry;
+		}
+	}
+
+	/*
+	 * $pwq may not have any inactive work items due to e.g. cancellations.
+	 * Drop it from pending_pwqs and see if there's another one.
+	 */
+	work = list_first_entry_or_null(&pwq->inactive_works,
+					struct work_struct, entry);
+	if (!work) {
+		list_del_init(&pwq->pending_node);
+		goto retry;
+	}
+
+	/*
+	 * Acquire an nr_active count and activate the inactive work item. If
+	 * $pwq still has inactive work items, rotate it to the end of the
+	 * pending_pwqs so that we round-robin through them. This means that
+	 * inactive work items are not activated in queueing order which is fine
+	 * given that there has never been any ordering across different pwqs.
+	 */
+	if (likely(tryinc_node_nr_active(nna))) {
+		pwq->nr_active++;
+		__pwq_activate_work(pwq, work);
+
+		if (list_empty(&pwq->inactive_works))
+			list_del_init(&pwq->pending_node);
+		else
+			list_move_tail(&pwq->pending_node, &nna->pending_pwqs);
+
+		/* if activating a foreign pool, make sure it's running */
+		if (pwq->pool != caller_pool)
+			kick_pool(pwq->pool);
+	}
+
+out_unlock:
+	raw_spin_unlock(&nna->lock);
+	if (locked_pool != caller_pool) {
+		raw_spin_unlock(&locked_pool->lock);
+		raw_spin_lock(&caller_pool->lock);
+	}
+}
+
 /**
  * pwq_dec_nr_active - Retire an active count
  * @pwq: pool_workqueue of interest
  *
  * Decrement @pwq's nr_active and try to activate the first inactive work item.
+ * For unbound workqueues, this function may temporarily drop @pwq->pool->lock.
  */
 static void pwq_dec_nr_active(struct pool_workqueue *pwq)
 {
@@ -1622,12 +1838,29 @@ static void pwq_dec_nr_active(struct pool_workqueue *pwq)
 	 * inactive work item on @pwq itself.
 	 */
 	if (!nna) {
-		pwq_activate_first_inactive(pwq);
+		pwq_activate_first_inactive(pwq, false);
 		return;
 	}
 
-	atomic_dec(&nna->nr);
-	pwq_activate_first_inactive(pwq);
+	/*
+	 * If @pwq is for an unbound workqueue, it's more complicated because
+	 * multiple pwqs and pools may be sharing the nr_active count. When a
+	 * pwq needs to wait for an nr_active count, it puts itself on
+	 * $nna->pending_pwqs. The following atomic_dec_return()'s implied
+	 * memory barrier is paired with smp_mb() in pwq_tryinc_nr_active() to
+	 * guarantee that either we see non-empty pending_pwqs or they see
+	 * decremented $nna->nr.
+	 *
+	 * $nna->max may change as CPUs come online/offline and @pwq->wq's
+	 * max_active gets updated. However, it is guaranteed to be equal to or
+	 * larger than @pwq->wq->min_active which is above zero unless freezing.
+	 * This maintains the forward progress guarantee.
+	 */
+	if (atomic_dec_return(&nna->nr) >= READ_ONCE(nna->max))
+		return;
+
+	if (!list_empty(&nna->pending_pwqs))
+		node_activate_pending_pwq(nna, pool);
 }
 
 /**
@@ -1948,7 +2181,7 @@ static void __queue_work(int cpu, struct workqueue_struct *wq,
 	 * @work must also queue behind existing inactive work items to maintain
 	 * ordering when max_active changes. See wq_adjust_max_active().
 	 */
-	if (list_empty(&pwq->inactive_works) && pwq_tryinc_nr_active(pwq)) {
+	if (list_empty(&pwq->inactive_works) && pwq_tryinc_nr_active(pwq, false)) {
 		if (list_empty(&pool->worklist))
 			pool->watchdog_ts = jiffies;
 
@@ -3181,7 +3414,7 @@ static void insert_wq_barrier(struct pool_workqueue *pwq,
 
 	barr->task = current;
 
-	/* The barrier work item does not participate in pwq->nr_active. */
+	/* The barrier work item does not participate in nr_active. */
 	work_flags |= WORK_STRUCT_INACTIVE;
 
 	/*
@@ -4097,6 +4330,8 @@ static void free_node_nr_active(struct wq_node_nr_active **nna_ar)
 static void init_node_nr_active(struct wq_node_nr_active *nna)
 {
 	atomic_set(&nna->nr, 0);
+	raw_spin_lock_init(&nna->lock);
+	INIT_LIST_HEAD(&nna->pending_pwqs);
 }
 
 /*
@@ -4336,6 +4571,15 @@ static void pwq_release_workfn(struct kthread_work *work)
 		mutex_unlock(&wq_pool_mutex);
 	}
 
+	if (!list_empty(&pwq->pending_node)) {
+		struct wq_node_nr_active *nna =
+			wq_node_nr_active(pwq->wq, pwq->pool->node);
+
+		raw_spin_lock_irq(&nna->lock);
+		list_del_init(&pwq->pending_node);
+		raw_spin_unlock_irq(&nna->lock);
+	}
+
 	call_rcu(&pwq->rcu, rcu_free_pwq);
 
 	/*
@@ -4361,6 +4605,7 @@ static void init_pwq(struct pool_workqueue *pwq, struct workqueue_struct *wq,
 	pwq->flush_color = -1;
 	pwq->refcnt = 1;
 	INIT_LIST_HEAD(&pwq->inactive_works);
+	INIT_LIST_HEAD(&pwq->pending_node);
 	INIT_LIST_HEAD(&pwq->pwqs_node);
 	INIT_LIST_HEAD(&pwq->mayday_node);
 	kthread_init_work(&pwq->release_work, pwq_release_workfn);
@@ -4568,6 +4813,9 @@ static void apply_wqattrs_commit(struct apply_wqattrs_ctx *ctx)
 							ctx->pwq_tbl[cpu]);
 	ctx->dfl_pwq = install_unbound_pwq(ctx->wq, -1, ctx->dfl_pwq);
 
+	/* update node_nr_active->max */
+	wq_update_node_max_active(ctx->wq, -1);
+
 	mutex_unlock(&ctx->wq->mutex);
 }
 
@@ -4841,24 +5089,35 @@ static int init_rescuer(struct workqueue_struct *wq)
 static void wq_adjust_max_active(struct workqueue_struct *wq)
 {
 	bool activated;
+	int new_max, new_min;
 
 	lockdep_assert_held(&wq->mutex);
 
 	if ((wq->flags & WQ_FREEZABLE) && workqueue_freezing) {
-		WRITE_ONCE(wq->max_active, 0);
-		return;
+		new_max = 0;
+		new_min = 0;
+	} else {
+		new_max = wq->saved_max_active;
+		new_min = wq->saved_min_active;
 	}
 
-	if (wq->max_active == wq->saved_max_active)
+	if (wq->max_active == new_max && wq->min_active == new_min)
 		return;
 
 	/*
-	 * Update @wq->max_active and then kick inactive work items if more
+	 * Update @wq->max/min_active and then kick inactive work items if more
 	 * active work items are allowed. This doesn't break work item ordering
 	 * because new work items are always queued behind existing inactive
 	 * work items if there are any.
 	 */
-	WRITE_ONCE(wq->max_active, wq->saved_max_active);
+	WRITE_ONCE(wq->max_active, new_max);
+	WRITE_ONCE(wq->min_active, new_min);
+
+	if (wq->flags & WQ_UNBOUND)
+		wq_update_node_max_active(wq, -1);
+
+	if (new_max == 0)
+		return;
 
 	/*
 	 * Round-robin through pwq's activating the first inactive work item
@@ -4873,7 +5132,7 @@ static void wq_adjust_max_active(struct workqueue_struct *wq)
 
 			/* can be called during early boot w/ irq disabled */
 			raw_spin_lock_irqsave(&pwq->pool->lock, flags);
-			if (pwq_activate_first_inactive(pwq)) {
+			if (pwq_activate_first_inactive(pwq, true)) {
 				activated = true;
 				kick_pool(pwq->pool);
 			}
@@ -4935,7 +5194,9 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
 	/* init wq */
 	wq->flags = flags;
 	wq->max_active = max_active;
-	wq->saved_max_active = max_active;
+	wq->min_active = min(max_active, WQ_DFL_MIN_ACTIVE);
+	wq->saved_max_active = wq->max_active;
+	wq->saved_min_active = wq->min_active;
 	mutex_init(&wq->mutex);
 	atomic_set(&wq->nr_pwqs_to_flush, 0);
 	INIT_LIST_HEAD(&wq->pwqs);
@@ -5101,7 +5362,8 @@ EXPORT_SYMBOL_GPL(destroy_workqueue);
  * @wq: target workqueue
  * @max_active: new max_active value.
  *
- * Set max_active of @wq to @max_active.
+ * Set max_active of @wq to @max_active. See the alloc_workqueue() function
+ * comment.
  *
  * CONTEXT:
  * Don't call from IRQ context.
@@ -5118,6 +5380,9 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
 
 	wq->flags &= ~__WQ_ORDERED;
 	wq->saved_max_active = max_active;
+	if (wq->flags & WQ_UNBOUND)
+		wq->saved_min_active = min(wq->saved_min_active, max_active);
+
 	wq_adjust_max_active(wq);
 
 	mutex_unlock(&wq->mutex);
@@ -5799,6 +6064,10 @@ int workqueue_online_cpu(unsigned int cpu)
 
 			for_each_cpu(tcpu, pt->pod_cpus[pt->cpu_pod[cpu]])
 				wq_update_pod(wq, tcpu, cpu, true);
+
+			mutex_lock(&wq->mutex);
+			wq_update_node_max_active(wq, -1);
+			mutex_unlock(&wq->mutex);
 		}
 	}
 
@@ -5827,6 +6096,10 @@ int workqueue_offline_cpu(unsigned int cpu)
 
 			for_each_cpu(tcpu, pt->pod_cpus[pt->cpu_pod[cpu]])
 				wq_update_pod(wq, tcpu, cpu, false);
+
+			mutex_lock(&wq->mutex);
+			wq_update_node_max_active(wq, cpu);
+			mutex_unlock(&wq->mutex);
 		}
 	}
 	mutex_unlock(&wq_pool_mutex);
@@ -7023,8 +7296,12 @@ void __init workqueue_init_topology(void)
 	 * combinations to apply per-pod sharing.
 	 */
 	list_for_each_entry(wq, &workqueues, list) {
-		for_each_online_cpu(cpu) {
+		for_each_online_cpu(cpu)
 			wq_update_pod(wq, cpu, cpu, true);
+		if (wq->flags & WQ_UNBOUND) {
+			mutex_lock(&wq->mutex);
+			wq_update_node_max_active(wq, -1);
+			mutex_unlock(&wq->mutex);
 		}
 	}
 
-- 
2.43.0

[PATCH 6.7 091/713] workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active()

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 15930da42f8981dc42c19038042947b475b19f47 ]

For wq_update_node_max_active(), @off_cpu of -1 indicates that no CPU is
going down. The function was incorrectly calling cpumask_test_cpu() with -1
CPU leading to oopses like the following on some archs:

  Unable to handle kernel paging request at virtual address ffff0002100296e0
  ..
  pc : wq_update_node_max_active+0x50/0x1fc
  lr : wq_update_node_max_active+0x1f0/0x1fc
  ...
  Call trace:
    wq_update_node_max_active+0x50/0x1fc
    apply_wqattrs_commit+0xf0/0x114
    apply_workqueue_attrs_locked+0x58/0xa0
    alloc_workqueue+0x5ac/0x774
    workqueue_init_early+0x460/0x540
    start_kernel+0x258/0x684
    __primary_switched+0xb8/0xc0
  Code: 9100a273 35000d01 53067f00 d0016dc1 (f8607a60)
  ---[ end trace 0000000000000000 ]---
  Kernel panic - not syncing: Attempted to kill the idle task!
  ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/91eacde0-df99-4d5c-a980-91046f66e612@samsung.com
Fixes: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 6b18926cf3523..6f7cb619aa5e4 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1500,7 +1500,7 @@ static void wq_update_node_max_active(struct workqueue_struct *wq, int off_cpu)
 
 	lockdep_assert_held(&wq->mutex);
 
-	if (!cpumask_test_cpu(off_cpu, effective))
+	if (off_cpu >= 0 && !cpumask_test_cpu(off_cpu, effective))
 		off_cpu = -1;
 
 	total_cpus = cpumask_weight_and(effective, cpu_online_mask);
-- 
2.43.0

[PATCH 6.7 092/713] iomap: clear the per-folio dirty bits on all writeback failures

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 7ea1d9b4a840c2dd01d1234663d4a8ef256cfe39 ]

write_cache_pages always clear the page dirty bit before calling into the
file systems, and leaves folios with a writeback failure without the
dirty bit after return.  We also clear the per-block writeback bits for
writeback failures unless no I/O has submitted, which will leave the
folio in an inconsistent state where it doesn't have the folio dirty,
but one or more per-block dirty bits.  This seems to be due the place
where the iomap_clear_range_dirty call was inserted into the existing
not very clearly structured code when adding per-block dirty bit support
and not actually intentional.  Switch to always clearing the dirty on
writeback failure.

Fixes: 4ce02c679722 ("iomap: Add per-block dirty state tracking to improve performance")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap/buffered-io.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index f72df2babe561..fc5c64712318a 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -1843,16 +1843,10 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
 	if (unlikely(error)) {
 		/*
 		 * Let the filesystem know what portion of the current page
-		 * failed to map. If the page hasn't been added to ioend, it
-		 * won't be affected by I/O completion and we must unlock it
-		 * now.
+		 * failed to map.
 		 */
 		if (wpc->ops->discard_folio)
 			wpc->ops->discard_folio(folio, pos);
-		if (!count) {
-			folio_unlock(folio);
-			goto done;
-		}
 	}
 
 	/*
@@ -1861,6 +1855,16 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
 	 * all the dirty bits in the folio here.
 	 */
 	iomap_clear_range_dirty(folio, 0, folio_size(folio));
+
+	/*
+	 * If the page hasn't been added to the ioend, it won't be affected by
+	 * I/O completion and we must unlock it now.
+	 */
+	if (error && !count) {
+		folio_unlock(folio);
+		goto done;
+	}
+
 	folio_start_writeback(folio);
 	folio_unlock(folio);
 
-- 
2.43.0

[PATCH 6.7 093/713] fs: Fix rw_hint validation

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit ec16b147a55bfa14e858234eb7b1a7c8e7cd5021 ]

Reject values that are valid rw_hints after truncation but not before
truncation by passing an untruncated value to rw_hint_valid().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5657cb0797c4 ("fs/fcntl: use copy_to/from_user() for u64 types")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fcntl.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index c80a6acad742f..3ff707bf2743a 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -268,7 +268,7 @@ static int f_getowner_uids(struct file *filp, unsigned long arg)
 }
 #endif
 
-static bool rw_hint_valid(enum rw_hint hint)
+static bool rw_hint_valid(u64 hint)
 {
 	switch (hint) {
 	case RWH_WRITE_LIFE_NOT_SET:
@@ -288,19 +288,17 @@ static long fcntl_rw_hint(struct file *file, unsigned int cmd,
 {
 	struct inode *inode = file_inode(file);
 	u64 __user *argp = (u64 __user *)arg;
-	enum rw_hint hint;
-	u64 h;
+	u64 hint;
 
 	switch (cmd) {
 	case F_GET_RW_HINT:
-		h = inode->i_write_hint;
-		if (copy_to_user(argp, &h, sizeof(*argp)))
+		hint = inode->i_write_hint;
+		if (copy_to_user(argp, &hint, sizeof(*argp)))
 			return -EFAULT;
 		return 0;
 	case F_SET_RW_HINT:
-		if (copy_from_user(&h, argp, sizeof(h)))
+		if (copy_from_user(&hint, argp, sizeof(hint)))
 			return -EFAULT;
-		hint = (enum rw_hint) h;
 		if (!rw_hint_valid(hint))
 			return -EINVAL;
 
-- 
2.43.0

[PATCH 6.7 094/713] io_uring: remove looping around handling traditional task_work

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 592b4805432af075468876771c0f7d41273ccb3c ]

A previous commit added looping around handling traditional task_work
as an optimization, and while that may seem like a good idea, it's also
possible to run into application starvation doing so. If the task_work
generation is bursty, we can get very deep task_work queues, and we can
end up looping in here for a very long time.

One immediately observable problem with that is handling network traffic
using provided buffers, where flooding incoming traffic and looping
task_work handling will very quickly lead to buffer starvation as we
keep running task_work rather than returning to the application so it
can handle the associated CQEs and also provide buffers back.

Fixes: 3a0c037b0e16 ("io_uring: batch task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 45 +++++++--------------------------------------
 1 file changed, 7 insertions(+), 38 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index f8d145fb40bbc..763ef8fff614f 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1174,12 +1174,11 @@ static void ctx_flush_and_put(struct io_ring_ctx *ctx, struct io_tw_state *ts)
 
 static unsigned int handle_tw_list(struct llist_node *node,
 				   struct io_ring_ctx **ctx,
-				   struct io_tw_state *ts,
-				   struct llist_node *last)
+				   struct io_tw_state *ts)
 {
 	unsigned int count = 0;
 
-	while (node && node != last) {
+	do {
 		struct llist_node *next = node->next;
 		struct io_kiocb *req = container_of(node, struct io_kiocb,
 						    io_task_work.node);
@@ -1203,7 +1202,7 @@ static unsigned int handle_tw_list(struct llist_node *node,
 			*ctx = NULL;
 			cond_resched();
 		}
-	}
+	} while (node);
 
 	return count;
 }
@@ -1222,22 +1221,6 @@ static inline struct llist_node *io_llist_xchg(struct llist_head *head,
 	return xchg(&head->first, new);
 }
 
-/**
- * io_llist_cmpxchg - possibly swap all entries in a lock-less list
- * @head:	the head of lock-less list to delete all entries
- * @old:	expected old value of the first entry of the list
- * @new:	new entry as the head of the list
- *
- * perform a cmpxchg on the first entry of the list.
- */
-
-static inline struct llist_node *io_llist_cmpxchg(struct llist_head *head,
-						  struct llist_node *old,
-						  struct llist_node *new)
-{
-	return cmpxchg(&head->first, old, new);
-}
-
 static __cold void io_fallback_tw(struct io_uring_task *tctx, bool sync)
 {
 	struct llist_node *node = llist_del_all(&tctx->task_list);
@@ -1272,9 +1255,7 @@ void tctx_task_work(struct callback_head *cb)
 	struct io_ring_ctx *ctx = NULL;
 	struct io_uring_task *tctx = container_of(cb, struct io_uring_task,
 						  task_work);
-	struct llist_node fake = {};
 	struct llist_node *node;
-	unsigned int loops = 0;
 	unsigned int count = 0;
 
 	if (unlikely(current->flags & PF_EXITING)) {
@@ -1282,21 +1263,9 @@ void tctx_task_work(struct callback_head *cb)
 		return;
 	}
 
-	do {
-		loops++;
-		node = io_llist_xchg(&tctx->task_list, &fake);
-		count += handle_tw_list(node, &ctx, &ts, &fake);
-
-		/* skip expensive cmpxchg if there are items in the list */
-		if (READ_ONCE(tctx->task_list.first) != &fake)
-			continue;
-		if (ts.locked && !wq_list_empty(&ctx->submit_state.compl_reqs)) {
-			io_submit_flush_completions(ctx);
-			if (READ_ONCE(tctx->task_list.first) != &fake)
-				continue;
-		}
-		node = io_llist_cmpxchg(&tctx->task_list, &fake, NULL);
-	} while (node != &fake);
+	node = llist_del_all(&tctx->task_list);
+	if (node)
+		count = handle_tw_list(node, &ctx, &ts);
 
 	ctx_flush_and_put(ctx, &ts);
 
@@ -1304,7 +1273,7 @@ void tctx_task_work(struct callback_head *cb)
 	if (unlikely(atomic_read(&tctx->in_cancel)))
 		io_uring_drop_tctx_refs(current);
 
-	trace_io_uring_task_work_run(tctx, count, loops);
+	trace_io_uring_task_work_run(tctx, count, 1);
 }
 
 static inline void io_req_local_work_add(struct io_kiocb *req, unsigned flags)
-- 
2.43.0

[PATCH 6.7 095/713] io_uring: remove unconditional looping in local task_work handling

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 9fe3eaea4a3530ca34a8d8ff00b1848c528789ca ]

If we have a ton of notifications coming in, we can be looping in here
for a long time. This can be problematic for various reasons, mostly
because we can starve userspace. If the application is waiting on N
events, then only re-run if we need more events.

Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 44 +++++++++++++++++++++++++++++---------------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 763ef8fff614f..b658ba6703cc2 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1370,7 +1370,20 @@ static void __cold io_move_task_work_from_local(struct io_ring_ctx *ctx)
 	}
 }
 
-static int __io_run_local_work(struct io_ring_ctx *ctx, struct io_tw_state *ts)
+static bool io_run_local_work_continue(struct io_ring_ctx *ctx, int events,
+				       int min_events)
+{
+	if (llist_empty(&ctx->work_llist))
+		return false;
+	if (events < min_events)
+		return true;
+	if (ctx->flags & IORING_SETUP_TASKRUN_FLAG)
+		atomic_or(IORING_SQ_TASKRUN, &ctx->rings->sq_flags);
+	return false;
+}
+
+static int __io_run_local_work(struct io_ring_ctx *ctx, struct io_tw_state *ts,
+			       int min_events)
 {
 	struct llist_node *node;
 	unsigned int loops = 0;
@@ -1399,18 +1412,20 @@ static int __io_run_local_work(struct io_ring_ctx *ctx, struct io_tw_state *ts)
 	}
 	loops++;
 
-	if (!llist_empty(&ctx->work_llist))
+	if (io_run_local_work_continue(ctx, ret, min_events))
 		goto again;
 	if (ts->locked) {
 		io_submit_flush_completions(ctx);
-		if (!llist_empty(&ctx->work_llist))
+		if (io_run_local_work_continue(ctx, ret, min_events))
 			goto again;
 	}
+
 	trace_io_uring_local_work_run(ctx, ret, loops);
 	return ret;
 }
 
-static inline int io_run_local_work_locked(struct io_ring_ctx *ctx)
+static inline int io_run_local_work_locked(struct io_ring_ctx *ctx,
+					   int min_events)
 {
 	struct io_tw_state ts = { .locked = true, };
 	int ret;
@@ -1418,20 +1433,20 @@ static inline int io_run_local_work_locked(struct io_ring_ctx *ctx)
 	if (llist_empty(&ctx->work_llist))
 		return 0;
 
-	ret = __io_run_local_work(ctx, &ts);
+	ret = __io_run_local_work(ctx, &ts, min_events);
 	/* shouldn't happen! */
 	if (WARN_ON_ONCE(!ts.locked))
 		mutex_lock(&ctx->uring_lock);
 	return ret;
 }
 
-static int io_run_local_work(struct io_ring_ctx *ctx)
+static int io_run_local_work(struct io_ring_ctx *ctx, int min_events)
 {
 	struct io_tw_state ts = {};
 	int ret;
 
 	ts.locked = mutex_trylock(&ctx->uring_lock);
-	ret = __io_run_local_work(ctx, &ts);
+	ret = __io_run_local_work(ctx, &ts, min_events);
 	if (ts.locked)
 		mutex_unlock(&ctx->uring_lock);
 
@@ -1627,7 +1642,7 @@ static int io_iopoll_check(struct io_ring_ctx *ctx, long min)
 		    io_task_work_pending(ctx)) {
 			u32 tail = ctx->cached_cq_tail;
 
-			(void) io_run_local_work_locked(ctx);
+			(void) io_run_local_work_locked(ctx, min);
 
 			if (task_work_pending(current) ||
 			    wq_list_empty(&ctx->iopoll_list)) {
@@ -2470,7 +2485,7 @@ int io_run_task_work_sig(struct io_ring_ctx *ctx)
 {
 	if (!llist_empty(&ctx->work_llist)) {
 		__set_current_state(TASK_RUNNING);
-		if (io_run_local_work(ctx) > 0)
+		if (io_run_local_work(ctx, INT_MAX) > 0)
 			return 0;
 	}
 	if (io_run_task_work() > 0)
@@ -2538,7 +2553,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,
 	if (!io_allowed_run_tw(ctx))
 		return -EEXIST;
 	if (!llist_empty(&ctx->work_llist))
-		io_run_local_work(ctx);
+		io_run_local_work(ctx, min_events);
 	io_run_task_work();
 	io_cqring_overflow_flush(ctx);
 	/* if user messes with these they will just get an early return */
@@ -2576,11 +2591,10 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,
 
 	trace_io_uring_cqring_wait(ctx, min_events);
 	do {
+		int nr_wait = (int) iowq.cq_tail - READ_ONCE(ctx->rings->cq.tail);
 		unsigned long check_cq;
 
 		if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) {
-			int nr_wait = (int) iowq.cq_tail - READ_ONCE(ctx->rings->cq.tail);
-
 			atomic_set(&ctx->cq_wait_nr, nr_wait);
 			set_current_state(TASK_INTERRUPTIBLE);
 		} else {
@@ -2599,7 +2613,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,
 		 */
 		io_run_task_work();
 		if (!llist_empty(&ctx->work_llist))
-			io_run_local_work(ctx);
+			io_run_local_work(ctx, nr_wait);
 
 		/*
 		 * Non-local task_work will be run on exit to userspace, but
@@ -3322,7 +3336,7 @@ static __cold bool io_uring_try_cancel_requests(struct io_ring_ctx *ctx,
 
 	if ((ctx->flags & IORING_SETUP_DEFER_TASKRUN) &&
 	    io_allowed_defer_tw_run(ctx))
-		ret |= io_run_local_work(ctx) > 0;
+		ret |= io_run_local_work(ctx, INT_MAX) > 0;
 	ret |= io_cancel_defer_files(ctx, task, cancel_all);
 	mutex_lock(&ctx->uring_lock);
 	ret |= io_poll_remove_all(ctx, task, cancel_all);
@@ -3684,7 +3698,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 			 * it should handle ownership problems if any.
 			 */
 			if (ctx->flags & IORING_SETUP_DEFER_TASKRUN)
-				(void)io_run_local_work_locked(ctx);
+				(void)io_run_local_work_locked(ctx, min_complete);
 		}
 		mutex_unlock(&ctx->uring_lock);
 	}
-- 
2.43.0

[PATCH 6.7 096/713] s390/dasd: Use dev_*() for device log messages

[Sasha Levin]

From: Jan Höppner <hoeppner@linux.ibm.com>

[ Upstream commit 79ae56fc475869d636071f66d9e4ef2a3819eee6 ]

All log messages in dasd.c use the printk variants of pr_*(). They all
add the name of the affected device manually to the log message.
This can be simplified by using the dev_*() variants of printk, which
include the device information and make a separate call to dev_name()
unnecessary.

The KMSG_COMPONENT and the pr_fmt() definition can be dropped. Note that
this removes the "dasd: " prefix from the one pr_info() call in
dasd_init(). However, the log message already provides all relevant
information.

Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-10-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c3116e62ddef ("s390/dasd: fix double module refcount decrement")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd.c | 50 +++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 833cfab7d8776..0eac1ae4f4acb 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -8,9 +8,6 @@
  * Copyright IBM Corp. 1999, 2009
  */
 
-#define KMSG_COMPONENT "dasd"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
 #include <linux/kmod.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -3408,8 +3405,7 @@ static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
 
 	ret = ccw_device_set_online(cdev);
 	if (ret)
-		pr_warn("%s: Setting the DASD online failed with rc=%d\n",
-			dev_name(&cdev->dev), ret);
+		dev_warn(&cdev->dev, "Setting the DASD online failed with rc=%d\n", ret);
 }
 
 /*
@@ -3496,8 +3492,11 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 {
 	struct dasd_discipline *discipline;
 	struct dasd_device *device;
+	struct device *dev;
 	int rc;
 
+	dev = &cdev->dev;
+
 	/* first online clears initial online feature flag */
 	dasd_set_feature(cdev, DASD_FEATURE_INITIAL_ONLINE, 0);
 	device = dasd_create_device(cdev);
@@ -3510,11 +3509,10 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 			/* Try to load the required module. */
 			rc = request_module(DASD_DIAG_MOD);
 			if (rc) {
-				pr_warn("%s Setting the DASD online failed "
-					"because the required module %s "
-					"could not be loaded (rc=%d)\n",
-					dev_name(&cdev->dev), DASD_DIAG_MOD,
-					rc);
+				dev_warn(dev, "Setting the DASD online failed "
+					 "because the required module %s "
+					 "could not be loaded (rc=%d)\n",
+					 DASD_DIAG_MOD, rc);
 				dasd_delete_device(device);
 				return -ENODEV;
 			}
@@ -3522,8 +3520,7 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 		/* Module init could have failed, so check again here after
 		 * request_module(). */
 		if (!dasd_diag_discipline_pointer) {
-			pr_warn("%s Setting the DASD online failed because of missing DIAG discipline\n",
-				dev_name(&cdev->dev));
+			dev_warn(dev, "Setting the DASD online failed because of missing DIAG discipline\n");
 			dasd_delete_device(device);
 			return -ENODEV;
 		}
@@ -3544,8 +3541,8 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 	/* check_device will allocate block device if necessary */
 	rc = discipline->check_device(device);
 	if (rc) {
-		pr_warn("%s Setting the DASD online with discipline %s failed with rc=%i\n",
-			dev_name(&cdev->dev), discipline->name, rc);
+		dev_warn(dev, "Setting the DASD online with discipline %s failed with rc=%i\n",
+			 discipline->name, rc);
 		module_put(discipline->owner);
 		module_put(base_discipline->owner);
 		dasd_delete_device(device);
@@ -3554,16 +3551,15 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 
 	dasd_set_target_state(device, DASD_STATE_ONLINE);
 	if (device->state <= DASD_STATE_KNOWN) {
-		pr_warn("%s Setting the DASD online failed because of a missing discipline\n",
-			dev_name(&cdev->dev));
+		dev_warn(dev, "Setting the DASD online failed because of a missing discipline\n");
 		rc = -ENODEV;
 		dasd_set_target_state(device, DASD_STATE_NEW);
 		if (device->block)
 			dasd_free_block(device->block);
 		dasd_delete_device(device);
-	} else
-		pr_debug("dasd_generic device %s found\n",
-				dev_name(&cdev->dev));
+	} else {
+		dev_dbg(dev, "dasd_generic device found\n");
+	}
 
 	wait_event(dasd_init_waitq, _wait_for_device(device));
 
@@ -3574,10 +3570,13 @@ EXPORT_SYMBOL_GPL(dasd_generic_set_online);
 
 int dasd_generic_set_offline(struct ccw_device *cdev)
 {
+	int max_count, open_count, rc;
 	struct dasd_device *device;
 	struct dasd_block *block;
-	int max_count, open_count, rc;
 	unsigned long flags;
+	struct device *dev;
+
+	dev = &cdev->dev;
 
 	rc = 0;
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
@@ -3598,11 +3597,10 @@ int dasd_generic_set_offline(struct ccw_device *cdev)
 		open_count = atomic_read(&device->block->open_count);
 		if (open_count > max_count) {
 			if (open_count > 0)
-				pr_warn("%s: The DASD cannot be set offline with open count %i\n",
-					dev_name(&cdev->dev), open_count);
+				dev_warn(dev, "The DASD cannot be set offline with open count %i\n",
+					 open_count);
 			else
-				pr_warn("%s: The DASD cannot be set offline while it is in use\n",
-					dev_name(&cdev->dev));
+				dev_warn(dev, "The DASD cannot be set offline while it is in use\n");
 			rc = -EBUSY;
 			goto out_err;
 		}
@@ -3962,8 +3960,8 @@ static int dasd_handle_autoquiesce(struct dasd_device *device,
 	if (dasd_eer_enabled(device))
 		dasd_eer_write(device, NULL, DASD_EER_AUTOQUIESCE);
 
-	pr_info("%s: The DASD has been put in the quiesce state\n",
-		dev_name(&device->cdev->dev));
+	dev_info(&device->cdev->dev,
+		 "The DASD has been put in the quiesce state\n");
 	dasd_device_set_stop_bits(device, DASD_STOPPED_QUIESCE);
 
 	if (device->features & DASD_FEATURE_REQUEUEQUIESCE)
-- 
2.43.0

[PATCH 6.7 097/713] s390/dasd: fix double module refcount decrement

[Sasha Levin]

From: Miroslav Franc <mfranc@suse.cz>

[ Upstream commit c3116e62ddeff79cae342147753ce596f01fcf06 ]

Once the discipline is associated with the device, deleting the device
takes care of decrementing the module's refcount.  Doing it manually on
this error path causes refcount to artificially decrease on each error
while it should just stay the same.

Fixes: c020d722b110 ("s390/dasd: fix panic during offline processing")
Signed-off-by: Miroslav Franc <mfranc@suse.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240209124522.3697827-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0eac1ae4f4acb..0eea5afe9e9ea 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -3530,12 +3530,11 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 		dasd_delete_device(device);
 		return -EINVAL;
 	}
+	device->base_discipline = base_discipline;
 	if (!try_module_get(discipline->owner)) {
-		module_put(base_discipline->owner);
 		dasd_delete_device(device);
 		return -EINVAL;
 	}
-	device->base_discipline = base_discipline;
 	device->discipline = discipline;
 
 	/* check_device will allocate block device if necessary */
@@ -3543,8 +3542,6 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 	if (rc) {
 		dev_warn(dev, "Setting the DASD online with discipline %s failed with rc=%i\n",
 			 discipline->name, rc);
-		module_put(discipline->owner);
-		module_put(base_discipline->owner);
 		dasd_delete_device(device);
 		return rc;
 	}
-- 
2.43.0

[PATCH 6.7 098/713] md: fix kmemleak of rdev->serial

[Sasha Levin]

From: Li Nan <linan122@huawei.com>

[ Upstream commit 6cf350658736681b9d6b0b6e58c5c76b235bb4c4 ]

If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be
alloc not be freed, and kmemleak occurs.

unreferenced object 0xffff88815a350000 (size 49152):
  comm "mdadm", pid 789, jiffies 4294716910
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc f773277a):
    [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0
    [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270
    [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f
    [<00000000f206d60a>] kvmalloc_node+0x74/0x150
    [<0000000034bf3363>] rdev_init_serial+0x67/0x170
    [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220
    [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630
    [<0000000073c28560>] md_add_new_disk+0x400/0x9f0
    [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10
    [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0
    [<0000000085086a11>] vfs_ioctl+0x22/0x60
    [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0
    [<00000000e54e675e>] do_syscall_64+0x71/0x150
    [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

Fixes: 963c555e75b0 ("md: introduce mddev_create/destroy_wb_pool for the change of member device")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240208085556.2412922-1-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 58889bc72659a..0b49033afa6bc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2582,6 +2582,7 @@ static int bind_rdev_to_array(struct md_rdev *rdev, struct mddev *mddev)
  fail:
 	pr_warn("md: failed to register dev-%s for %s\n",
 		b, mdname(mddev));
+	mddev_destroy_serial_pool(mddev, rdev);
 	return err;
 }
 
-- 
2.43.0

[PATCH 6.7 099/713] rcu/exp: Fix RCU expedited parallel grace period kworker allocation failure recovery

[Sasha Levin]

From: Frederic Weisbecker <frederic@kernel.org>

[ Upstream commit a636c5e6f8fc34be520277e69c7c6ee1d4fc1d17 ]

Under CONFIG_RCU_EXP_KTHREAD=y, the nodes initialization for expedited
grace periods is queued to a kworker. However if the allocation of that
kworker failed, the nodes initialization is performed synchronously by
the caller instead.

Now the check for kworker initialization failure relies on the kworker
pointer to be NULL while its value might actually encapsulate an
allocation failure error.

Make sure to handle this case.

Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 9621fbee44df ("rcu: Move expedited grace period (GP) work to RT kthread_worker")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tree.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 157f3ca2a9b56..fc318477877ba 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -4747,6 +4747,7 @@ static void __init rcu_start_exp_gp_kworkers(void)
 	rcu_exp_par_gp_kworker = kthread_create_worker(0, par_gp_kworker_name);
 	if (IS_ERR_OR_NULL(rcu_exp_par_gp_kworker)) {
 		pr_err("Failed to create %s!\n", par_gp_kworker_name);
+		rcu_exp_par_gp_kworker = NULL;
 		kthread_destroy_worker(rcu_exp_gp_kworker);
 		return;
 	}
-- 
2.43.0

[PATCH 6.7 100/713] rcu/exp: Handle RCU expedited grace period kworker allocation failure

[Sasha Levin]

From: Frederic Weisbecker <frederic@kernel.org>

[ Upstream commit e7539ffc9a770f36bacedcf0fbfb4bf2f244f4a5 ]

Just like is done for the kworker performing nodes initialization,
gracefully handle the possible allocation failure of the RCU expedited
grace period main kworker.

While at it perform a rename of the related checking functions to better
reflect the expedited specifics.

Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 9621fbee44df ("rcu: Move expedited grace period (GP) work to RT kthread_worker")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tree.c     |  2 ++
 kernel/rcu/tree_exp.h | 25 +++++++++++++++++++------
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index fc318477877ba..f544f24df1856 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -4741,6 +4741,7 @@ static void __init rcu_start_exp_gp_kworkers(void)
 	rcu_exp_gp_kworker = kthread_create_worker(0, gp_kworker_name);
 	if (IS_ERR_OR_NULL(rcu_exp_gp_kworker)) {
 		pr_err("Failed to create %s!\n", gp_kworker_name);
+		rcu_exp_gp_kworker = NULL;
 		return;
 	}
 
@@ -4749,6 +4750,7 @@ static void __init rcu_start_exp_gp_kworkers(void)
 		pr_err("Failed to create %s!\n", par_gp_kworker_name);
 		rcu_exp_par_gp_kworker = NULL;
 		kthread_destroy_worker(rcu_exp_gp_kworker);
+		rcu_exp_gp_kworker = NULL;
 		return;
 	}
 
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 2ac440bc7e10b..8107f818455da 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -428,7 +428,12 @@ static void sync_rcu_exp_select_node_cpus(struct kthread_work *wp)
 	__sync_rcu_exp_select_node_cpus(rewp);
 }
 
-static inline bool rcu_gp_par_worker_started(void)
+static inline bool rcu_exp_worker_started(void)
+{
+	return !!READ_ONCE(rcu_exp_gp_kworker);
+}
+
+static inline bool rcu_exp_par_worker_started(void)
 {
 	return !!READ_ONCE(rcu_exp_par_gp_kworker);
 }
@@ -478,7 +483,12 @@ static void sync_rcu_exp_select_node_cpus(struct work_struct *wp)
 	__sync_rcu_exp_select_node_cpus(rewp);
 }
 
-static inline bool rcu_gp_par_worker_started(void)
+static inline bool rcu_exp_worker_started(void)
+{
+	return !!READ_ONCE(rcu_gp_wq);
+}
+
+static inline bool rcu_exp_par_worker_started(void)
 {
 	return !!READ_ONCE(rcu_par_gp_wq);
 }
@@ -541,7 +551,7 @@ static void sync_rcu_exp_select_cpus(void)
 		rnp->exp_need_flush = false;
 		if (!READ_ONCE(rnp->expmask))
 			continue; /* Avoid early boot non-existent wq. */
-		if (!rcu_gp_par_worker_started() ||
+		if (!rcu_exp_par_worker_started() ||
 		    rcu_scheduler_active != RCU_SCHEDULER_RUNNING ||
 		    rcu_is_last_leaf_node(rnp)) {
 			/* No worker started yet or last leaf, do direct call. */
@@ -956,7 +966,7 @@ static void rcu_exp_print_detail_task_stall_rnp(struct rcu_node *rnp)
  */
 void synchronize_rcu_expedited(void)
 {
-	bool boottime = (rcu_scheduler_active == RCU_SCHEDULER_INIT);
+	bool use_worker;
 	unsigned long flags;
 	struct rcu_exp_work rew;
 	struct rcu_node *rnp;
@@ -967,6 +977,9 @@ void synchronize_rcu_expedited(void)
 			 lock_is_held(&rcu_sched_lock_map),
 			 "Illegal synchronize_rcu_expedited() in RCU read-side critical section");
 
+	use_worker = (rcu_scheduler_active != RCU_SCHEDULER_INIT) &&
+		      rcu_exp_worker_started();
+
 	/* Is the state is such that the call is a grace period? */
 	if (rcu_blocking_is_gp()) {
 		// Note well that this code runs with !PREEMPT && !SMP.
@@ -996,7 +1009,7 @@ void synchronize_rcu_expedited(void)
 		return;  /* Someone else did our work for us. */
 
 	/* Ensure that load happens before action based on it. */
-	if (unlikely(boottime)) {
+	if (unlikely(!use_worker)) {
 		/* Direct call during scheduler init and early_initcalls(). */
 		rcu_exp_sel_wait_wake(s);
 	} else {
@@ -1014,7 +1027,7 @@ void synchronize_rcu_expedited(void)
 	/* Let the next expedited grace period start. */
 	mutex_unlock(&rcu_state.exp_mutex);
 
-	if (likely(!boottime))
+	if (likely(use_worker))
 		synchronize_rcu_expedited_destroy_work(&rew);
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
-- 
2.43.0

[PATCH 6.7 101/713] nbd: null check for nla_nest_start

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 31edf4bbe0ba27fd03ac7d87eb2ee3d2a231af6d ]

nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Fixes: 47d902b90a32 ("nbd: add a status netlink command")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240218042534.it.206-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index aa65313aabb8d..df738eab02433 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -2437,6 +2437,12 @@ static int nbd_genl_status(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	dev_list = nla_nest_start_noflag(reply, NBD_ATTR_DEVICE_LIST);
+	if (!dev_list) {
+		nlmsg_free(reply);
+		ret = -EMSGSIZE;
+		goto out;
+	}
+
 	if (index == -1) {
 		ret = idr_for_each(&nbd_index_idr, &status_cb, reply);
 		if (ret) {
-- 
2.43.0

[PATCH 6.7 102/713] fs/select: rework stack allocation hack for clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ddb9fd7a544088ed70eccbb9f85e9cc9952131c1 ]

A while ago, we changed the way that select() and poll() preallocate
a temporary buffer just under the size of the static warning limit of
1024 bytes, as clang was frequently going slightly above that limit.

The warnings have recently returned and I took another look. As it turns
out, clang is not actually inherently worse at reserving stack space,
it just happens to inline do_select() into core_sys_select(), while gcc
never inlines it.

Annotate do_select() to never be inlined and in turn remove the special
case for the allocation size. This should give the same behavior for
both clang and gcc all the time and once more avoids those warnings.

Fixes: ad312f95d41c ("fs/select: avoid clang stack usage warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240216202352.2492798-1-arnd@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/select.c          | 2 +-
 include/linux/poll.h | 4 ----
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/fs/select.c b/fs/select.c
index 0ee55af1a55c2..d4d881d439dcd 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -476,7 +476,7 @@ static inline void wait_key_set(poll_table *wait, unsigned long in,
 		wait->_key |= POLLOUT_SET;
 }
 
-static int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
+static noinline_for_stack int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
 {
 	ktime_t expire, *to = NULL;
 	struct poll_wqueues table;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index a9e0e1c2d1f2f..d1ea4f3714a84 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -14,11 +14,7 @@
 
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
    additional memory. */
-#ifdef __clang__
-#define MAX_STACK_ALLOC 768
-#else
 #define MAX_STACK_ALLOC 832
-#endif
 #define FRONTEND_STACK_ALLOC	256
 #define SELECT_STACK_ALLOC	FRONTEND_STACK_ALLOC
 #define POLL_STACK_ALLOC	FRONTEND_STACK_ALLOC
-- 
2.43.0

[PATCH 6.7 103/713] block: fix deadlock between bd_link_disk_holder and partition scan

[Sasha Levin]

From: Li Nan <linan122@huawei.com>

[ Upstream commit 03f12122b20b6e6028e9ed69030a49f9cffcbb75 ]

'open_mutex' of gendisk is used to protect open/close block devices. But
in bd_link_disk_holder(), it is used to protect the creation of symlink
between holding disk and slave bdev, which introduces some issues.

When bd_link_disk_holder() is called, the driver is usually in the process
of initialization/modification and may suspend submitting io. At this
time, any io hold 'open_mutex', such as scanning partitions, can cause
deadlocks. For example, in raid:

T1                              T2
bdev_open_by_dev
 lock open_mutex [1]
 ...
  efi_partition
  ...
   md_submit_bio
				md_ioctl mddev_syspend
				  -> suspend all io
				 md_add_new_disk
				  bind_rdev_to_array
				   bd_link_disk_holder
				    try lock open_mutex [2]
    md_handle_request
     -> wait mddev_resume

T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume
mddev, but T2 waits for open_mutex held by T1. Deadlock occurs.

Fix it by introducing a local mutex 'blk_holder_mutex' to replace
'open_mutex'.

Fixes: 1b0a2d950ee2 ("md: use new apis to suspend array for ioctls involed array reconfiguration")
Reported-by: mgperkow@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218459
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240221090122.1281868-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/holder.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/block/holder.c b/block/holder.c
index 37d18c13d9581..791091a7eac23 100644
--- a/block/holder.c
+++ b/block/holder.c
@@ -8,6 +8,8 @@ struct bd_holder_disk {
 	int			refcnt;
 };
 
+static DEFINE_MUTEX(blk_holder_mutex);
+
 static struct bd_holder_disk *bd_find_holder_disk(struct block_device *bdev,
 						  struct gendisk *disk)
 {
@@ -80,7 +82,7 @@ int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk)
 	kobject_get(bdev->bd_holder_dir);
 	mutex_unlock(&bdev->bd_disk->open_mutex);
 
-	mutex_lock(&disk->open_mutex);
+	mutex_lock(&blk_holder_mutex);
 	WARN_ON_ONCE(!bdev->bd_holder);
 
 	holder = bd_find_holder_disk(bdev, disk);
@@ -108,7 +110,7 @@ int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk)
 		goto out_del_symlink;
 	list_add(&holder->list, &disk->slave_bdevs);
 
-	mutex_unlock(&disk->open_mutex);
+	mutex_unlock(&blk_holder_mutex);
 	return 0;
 
 out_del_symlink:
@@ -116,7 +118,7 @@ int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk)
 out_free_holder:
 	kfree(holder);
 out_unlock:
-	mutex_unlock(&disk->open_mutex);
+	mutex_unlock(&blk_holder_mutex);
 	if (ret)
 		kobject_put(bdev->bd_holder_dir);
 	return ret;
@@ -140,7 +142,7 @@ void bd_unlink_disk_holder(struct block_device *bdev, struct gendisk *disk)
 	if (WARN_ON_ONCE(!disk->slave_dir))
 		return;
 
-	mutex_lock(&disk->open_mutex);
+	mutex_lock(&blk_holder_mutex);
 	holder = bd_find_holder_disk(bdev, disk);
 	if (!WARN_ON_ONCE(holder == NULL) && !--holder->refcnt) {
 		del_symlink(disk->slave_dir, bdev_kobj(bdev));
@@ -149,6 +151,6 @@ void bd_unlink_disk_holder(struct block_device *bdev, struct gendisk *disk)
 		list_del_init(&holder->list);
 		kfree(holder);
 	}
-	mutex_unlock(&disk->open_mutex);
+	mutex_unlock(&blk_holder_mutex);
 }
 EXPORT_SYMBOL_GPL(bd_unlink_disk_holder);
-- 
2.43.0

[PATCH 6.7 104/713] md: Don't clear MD_CLOSING when the raid is about to stop

[Sasha Levin]

From: Li Nan <linan122@huawei.com>

[ Upstream commit 9674f54e41fffaf06f6a60202e1fa4cc13de3cf5 ]

The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.

Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-6-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 0b49033afa6bc..b2f27ac51bfb6 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6304,7 +6304,15 @@ static void md_clean(struct mddev *mddev)
 	mddev->persistent = 0;
 	mddev->level = LEVEL_NONE;
 	mddev->clevel[0] = 0;
-	mddev->flags = 0;
+	/*
+	 * Don't clear MD_CLOSING, or mddev can be opened again.
+	 * 'hold_active != 0' means mddev is still in the creation
+	 * process and will be used later.
+	 */
+	if (mddev->hold_active)
+		mddev->flags = 0;
+	else
+		mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
 	mddev->sb_flags = 0;
 	mddev->ro = MD_RDWR;
 	mddev->metadata_type[0] = 0;
@@ -7650,7 +7658,6 @@ static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
 	int err = 0;
 	void __user *argp = (void __user *)arg;
 	struct mddev *mddev = NULL;
-	bool did_set_md_closing = false;
 
 	if (!md_ioctl_valid(cmd))
 		return -ENOTTY;
@@ -7734,7 +7741,6 @@ static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
 			err = -EBUSY;
 			goto out;
 		}
-		did_set_md_closing = true;
 		mutex_unlock(&mddev->open_mutex);
 		sync_blockdev(bdev);
 	}
@@ -7876,7 +7882,7 @@ static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
 				     mddev_unlock(mddev);
 
 out:
-	if(did_set_md_closing)
+	if (cmd == STOP_ARRAY_RO || (err && cmd == STOP_ARRAY))
 		clear_bit(MD_CLOSING, &mddev->flags);
 	return err;
 }
-- 
2.43.0

[PATCH 6.7 105/713] ovl: Always reject mounting over case-insensitive directories

[Sasha Levin]

From: Gabriel Krisman Bertazi <krisman@suse.de>

[ Upstream commit 2824083db76cb9d4b7910607b367e93b02912865 ]

overlayfs relies on the filesystem setting DCACHE_OP_HASH or
DCACHE_OP_COMPARE to reject mounting over case-insensitive directories.

Since commit bb9cd9106b22 ("fscrypt: Have filesystems handle their
d_ops"), we set ->d_op through a hook in ->d_lookup, which
means the root dentry won't have them, causing the mount to accidentally
succeed.

In v6.7-rc7, the following sequence will succeed to mount, but any
dentry other than the root dentry will be a "weird" dentry to ovl and
fail with EREMOTE.

  mkfs.ext4 -O casefold lower.img
  mount -O loop lower.img lower
  mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work ovl /mnt

Mounting on a subdirectory fails, as expected, because DCACHE_OP_HASH
and DCACHE_OP_COMPARE are properly set by ->lookup.

Fix by explicitly rejecting superblocks that allow case-insensitive
dentries. Yes, this will be solved when we move d_op configuration back
to ->s_d_op. Yet, we better have an explicit fix to avoid messing up
again.

While there, re-sort the entries to have more descriptive error messages
first.

Fixes: bb9cd9106b22 ("fscrypt: Have filesystems handle their d_ops")
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-2-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/overlayfs/params.c | 14 +++++++++++---
 include/linux/fs.h    |  9 +++++++++
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/fs/overlayfs/params.c b/fs/overlayfs/params.c
index 3fe2dde1598f9..488f920f79d28 100644
--- a/fs/overlayfs/params.c
+++ b/fs/overlayfs/params.c
@@ -280,12 +280,20 @@ static int ovl_mount_dir_check(struct fs_context *fc, const struct path *path,
 {
 	struct ovl_fs_context *ctx = fc->fs_private;
 
-	if (ovl_dentry_weird(path->dentry))
-		return invalfc(fc, "filesystem on %s not supported", name);
-
 	if (!d_is_dir(path->dentry))
 		return invalfc(fc, "%s is not a directory", name);
 
+	/*
+	 * Root dentries of case-insensitive capable filesystems might
+	 * not have the dentry operations set, but still be incompatible
+	 * with overlayfs.  Check explicitly to prevent post-mount
+	 * failures.
+	 */
+	if (sb_has_encoding(path->mnt->mnt_sb))
+		return invalfc(fc, "case-insensitive capable filesystem on %s not supported", name);
+
+	if (ovl_dentry_weird(path->dentry))
+		return invalfc(fc, "filesystem on %s not supported", name);
 
 	/*
 	 * Check whether upper path is read-only here to report failures
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7f659c26794b5..98c718b0fe532 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3205,6 +3205,15 @@ extern int generic_check_addressable(unsigned, u64);
 
 extern void generic_set_encrypted_ci_d_ops(struct dentry *dentry);
 
+static inline bool sb_has_encoding(const struct super_block *sb)
+{
+#if IS_ENABLED(CONFIG_UNICODE)
+	return !!sb->s_encoding;
+#else
+	return false;
+#endif
+}
+
 int may_setattr(struct mnt_idmap *idmap, struct inode *inode,
 		unsigned int ia_valid);
 int setattr_prepare(struct mnt_idmap *, struct dentry *, struct iattr *);
-- 
2.43.0

[PATCH 6.7 106/713] kunit: test: Log the correct filter string in executor_test

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit 6f2f793fba78eb4a0d5a34a71bc781118ed923d3 ]

KUnit's executor_test logs the filter string in KUNIT_ASSERT_EQ_MSG(),
but passed a random character from the filter, rather than the whole
string.

This was found by annotating KUNIT_ASSERT_EQ_MSG() to let gcc validate
the format string.

Fixes: 76066f93f1df ("kunit: add tests for filtering attributes")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/kunit/executor_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c
index 22d4ee86dbedd..3f7f967e3688e 100644
--- a/lib/kunit/executor_test.c
+++ b/lib/kunit/executor_test.c
@@ -129,7 +129,7 @@ static void parse_filter_attr_test(struct kunit *test)
 			GFP_KERNEL);
 	for (j = 0; j < filter_count; j++) {
 		parsed_filters[j] = kunit_next_attr_filter(&filter, &err);
-		KUNIT_ASSERT_EQ_MSG(test, err, 0, "failed to parse filter '%s'", filters[j]);
+		KUNIT_ASSERT_EQ_MSG(test, err, 0, "failed to parse filter from '%s'", filters);
 	}
 
 	KUNIT_EXPECT_STREQ(test, kunit_attr_filter_name(parsed_filters[0]), "speed");
-- 
2.43.0

[PATCH 6.7 107/713] lib/cmdline: Fix an invalid format specifier in an assertion msg

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit d2733a026fc7247ba42d7a8e1b737cf14bf1df21 ]

The correct format specifier for p - n (both p and n are pointers) is
%td, as the type should be ptrdiff_t.

This was discovered by annotating KUnit assertion macros with gcc's
printf specifier, but note that gcc incorrectly suggested a %d or %ld
specifier (depending on the pointer size of the architecture being
built).

Fixes: 0ea09083116d ("lib/cmdline: Allow get_options() to take 0 to validate the input")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/cmdline_kunit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/cmdline_kunit.c b/lib/cmdline_kunit.c
index d4572dbc91453..705b82736be08 100644
--- a/lib/cmdline_kunit.c
+++ b/lib/cmdline_kunit.c
@@ -124,7 +124,7 @@ static void cmdline_do_one_range_test(struct kunit *test, const char *in,
 			    n, e[0], r[0]);
 
 	p = memchr_inv(&r[1], 0, sizeof(r) - sizeof(r[0]));
-	KUNIT_EXPECT_PTR_EQ_MSG(test, p, NULL, "in test %u at %u out of bound", n, p - r);
+	KUNIT_EXPECT_PTR_EQ_MSG(test, p, NULL, "in test %u at %td out of bound", n, p - r);
 }
 
 static void cmdline_test_range(struct kunit *test)
-- 
2.43.0

[PATCH 6.7 108/713] lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit 0a549ed22c3c7cc6da5c5f5918efd019944489a5 ]

The 'i' passed as an assertion message is a size_t, so should use '%zu',
not '%d'.

This was found by annotating the _MSG() variants of KUnit's assertions
to let gcc validate the format strings.

Fixes: bb95ebbe89a7 ("lib: Introduce CONFIG_MEMCPY_KUNIT_TEST")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/memcpy_kunit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/memcpy_kunit.c b/lib/memcpy_kunit.c
index 440aee705ccca..30e00ef0bf2e0 100644
--- a/lib/memcpy_kunit.c
+++ b/lib/memcpy_kunit.c
@@ -32,7 +32,7 @@ struct some_bytes {
 	BUILD_BUG_ON(sizeof(instance.data) != 32);	\
 	for (size_t i = 0; i < sizeof(instance.data); i++) {	\
 		KUNIT_ASSERT_EQ_MSG(test, instance.data[i], v, \
-			"line %d: '%s' not initialized to 0x%02x @ %d (saw 0x%02x)\n", \
+			"line %d: '%s' not initialized to 0x%02x @ %zu (saw 0x%02x)\n", \
 			__LINE__, #instance, v, i, instance.data[i]);	\
 	}	\
 } while (0)
@@ -41,7 +41,7 @@ struct some_bytes {
 	BUILD_BUG_ON(sizeof(one) != sizeof(two)); \
 	for (size_t i = 0; i < sizeof(one); i++) {	\
 		KUNIT_EXPECT_EQ_MSG(test, one.data[i], two.data[i], \
-			"line %d: %s.data[%d] (0x%02x) != %s.data[%d] (0x%02x)\n", \
+			"line %d: %s.data[%zu] (0x%02x) != %s.data[%zu] (0x%02x)\n", \
 			__LINE__, #one, i, one.data[i], #two, i, two.data[i]); \
 	}	\
 	kunit_info(test, "ok: " TEST_OP "() " name "\n");	\
-- 
2.43.0

[PATCH 6.7 109/713] time: test: Fix incorrect format specifier

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit 133e267ef4a26d19c93996a874714e9f3f8c70aa ]

'days' is a s64 (from div_s64), and so should use a %lld specifier.

This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.

Fixes: 276010551664 ("time: Improve performance of time64_to_tm()")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/time_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/time_test.c b/kernel/time/time_test.c
index ca058c8af6baf..3e5d422dd15cb 100644
--- a/kernel/time/time_test.c
+++ b/kernel/time/time_test.c
@@ -73,7 +73,7 @@ static void time64_to_tm_test_date_range(struct kunit *test)
 
 		days = div_s64(secs, 86400);
 
-		#define FAIL_MSG "%05ld/%02d/%02d (%2d) : %ld", \
+		#define FAIL_MSG "%05ld/%02d/%02d (%2d) : %lld", \
 			year, month, mdday, yday, days
 
 		KUNIT_ASSERT_EQ_MSG(test, year - 1900, result.tm_year, FAIL_MSG);
-- 
2.43.0

[PATCH 6.7 110/713] rtc: test: Fix invalid format specifier.

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit 8a904a3caa88118744062e872ae90f37748a8fd8 ]

'days' is a s64 (from div_s64), and so should use a %lld specifier.

This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.

Fixes: 1d1bb12a8b18 ("rtc: Improve performance of rtc_time64_to_tm(). Add tests.")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/lib_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/lib_test.c b/drivers/rtc/lib_test.c
index d5caf36c56cdc..225c859d6da55 100644
--- a/drivers/rtc/lib_test.c
+++ b/drivers/rtc/lib_test.c
@@ -54,7 +54,7 @@ static void rtc_time64_to_tm_test_date_range(struct kunit *test)
 
 		days = div_s64(secs, 86400);
 
-		#define FAIL_MSG "%d/%02d/%02d (%2d) : %ld", \
+		#define FAIL_MSG "%d/%02d/%02d (%2d) : %lld", \
 			year, month, mday, yday, days
 
 		KUNIT_ASSERT_EQ_MSG(test, year - 1900, result.tm_year, FAIL_MSG);
-- 
2.43.0

[PATCH 6.7 111/713] net: test: Fix printf format specifier in skb_segment kunit test

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit ff3b96f2c9e5c24fca12239cd519a8a18569e687 ]

KUNIT_FAIL() accepts a printf-style format string, but previously did
not let gcc validate it with the __printf() attribute. The use of %lld
for the result of PTR_ERR() is not correct.

Instead, use %pe and pass the actual error pointer. printk() will format
it correctly (and give a symbolic name rather than a number if
available, which should make the output more readable, too).

Fixes: b3098d32ed6e ("net: add skb_segment kunit test")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/gso_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/gso_test.c b/net/core/gso_test.c
index 4c2e77bd12f4b..358c44680d917 100644
--- a/net/core/gso_test.c
+++ b/net/core/gso_test.c
@@ -225,7 +225,7 @@ static void gso_test_func(struct kunit *test)
 
 	segs = skb_segment(skb, features);
 	if (IS_ERR(segs)) {
-		KUNIT_FAIL(test, "segs error %lld", PTR_ERR(segs));
+		KUNIT_FAIL(test, "segs error %pe", segs);
 		goto free_gso_skb;
 	} else if (!segs) {
 		KUNIT_FAIL(test, "no segments");
-- 
2.43.0

[PATCH 6.7 112/713] md: remove flag RemoveSynchronized

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit c891f1fd90e66e584bb1353e1859cef7c9eb36f8 ]

rcu is not used correctly here, because synchronize_rcu() is called
before replacing old value, for example:

remove_and_add_spares   // other path
 synchronize_rcu
 // called before replacing old value
 set_bit(RemoveSynchronized)
                        rcu_read_lock()
                        rdev = conf->mirros[].rdev
 pers->hot_remove_disk
  conf->mirros[].rdev = NULL;
  if (!test_bit(RemoveSynchronized))
   synchronize_rcu
   /*
    * won't be called, and won't wait
    * for concurrent readers to be done.
    */
                        // access rdev after remove_and_add_spares()
                        rcu_read_unlock()

Fortunately, there is a separate rcu protection to prevent such rdev
to be freed:

md_kick_rdev_from_array		//other path
				rcu_read_lock()
				rdev = conf->mirros[].rdev
list_del_rcu(&rdev->same_set)

				rcu_read_unlock()
				/*
				 * rdev can be removed from conf, but
				 * rdev won't be freed.
				 */
synchronize_rcu()
free rdev

Hence remove this useless flag and prepare to remove rcu protection to
access rdev from 'conf'.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-2-yukuai1@huaweicloud.com
Stable-dep-of: 257ac239ffcf ("md/raid1: fix choose next idle in read_balance()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-multipath.c |  9 ---------
 drivers/md/md.c           | 37 ++++++-------------------------------
 drivers/md/md.h           |  5 -----
 drivers/md/raid1.c        |  9 ---------
 drivers/md/raid10.c       |  9 ---------
 drivers/md/raid5.c        |  9 ---------
 6 files changed, 6 insertions(+), 72 deletions(-)

diff --git a/drivers/md/md-multipath.c b/drivers/md/md-multipath.c
index d22276870283d..aa77133f31887 100644
--- a/drivers/md/md-multipath.c
+++ b/drivers/md/md-multipath.c
@@ -258,15 +258,6 @@ static int multipath_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 			goto abort;
 		}
 		p->rdev = NULL;
-		if (!test_bit(RemoveSynchronized, &rdev->flags)) {
-			synchronize_rcu();
-			if (atomic_read(&rdev->nr_pending)) {
-				/* lost the race, try later */
-				err = -EBUSY;
-				p->rdev = rdev;
-				goto abort;
-			}
-		}
 		err = md_integrity_register(mddev);
 	}
 abort:
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b2f27ac51bfb6..99b60d37114c4 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9314,44 +9314,19 @@ static int remove_and_add_spares(struct mddev *mddev,
 	struct md_rdev *rdev;
 	int spares = 0;
 	int removed = 0;
-	bool remove_some = false;
 
 	if (this && test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
 		/* Mustn't remove devices when resync thread is running */
 		return 0;
 
 	rdev_for_each(rdev, mddev) {
-		if ((this == NULL || rdev == this) &&
-		    rdev->raid_disk >= 0 &&
-		    !test_bit(Blocked, &rdev->flags) &&
-		    test_bit(Faulty, &rdev->flags) &&
-		    atomic_read(&rdev->nr_pending)==0) {
-			/* Faulty non-Blocked devices with nr_pending == 0
-			 * never get nr_pending incremented,
-			 * never get Faulty cleared, and never get Blocked set.
-			 * So we can synchronize_rcu now rather than once per device
-			 */
-			remove_some = true;
-			set_bit(RemoveSynchronized, &rdev->flags);
-		}
-	}
-
-	if (remove_some)
-		synchronize_rcu();
-	rdev_for_each(rdev, mddev) {
-		if ((this == NULL || rdev == this) &&
-		    (test_bit(RemoveSynchronized, &rdev->flags) ||
-		     rdev_removeable(rdev))) {
-			if (mddev->pers->hot_remove_disk(
-				    mddev, rdev) == 0) {
-				sysfs_unlink_rdev(mddev, rdev);
-				rdev->saved_raid_disk = rdev->raid_disk;
-				rdev->raid_disk = -1;
-				removed++;
-			}
+		if ((this == NULL || rdev == this) && rdev_removeable(rdev) &&
+		    !mddev->pers->hot_remove_disk(mddev, rdev)) {
+			sysfs_unlink_rdev(mddev, rdev);
+			rdev->saved_raid_disk = rdev->raid_disk;
+			rdev->raid_disk = -1;
+			removed++;
 		}
-		if (remove_some && test_bit(RemoveSynchronized, &rdev->flags))
-			clear_bit(RemoveSynchronized, &rdev->flags);
 	}
 
 	if (removed && mddev->kobj.sd)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index ade83af123a22..8d881cc597992 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -190,11 +190,6 @@ enum flag_bits {
 				 * than other devices in the array
 				 */
 	ClusterRemove,
-	RemoveSynchronized,	/* synchronize_rcu() was called after
-				 * this device was known to be faulty,
-				 * so it is safe to remove without
-				 * another synchronize_rcu() call.
-				 */
 	ExternalBbl,            /* External metadata provides bad
 				 * block management for a disk
 				 */
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index e138922d51292..6bd42ccbea9c4 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1863,15 +1863,6 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 			goto abort;
 		}
 		p->rdev = NULL;
-		if (!test_bit(RemoveSynchronized, &rdev->flags)) {
-			synchronize_rcu();
-			if (atomic_read(&rdev->nr_pending)) {
-				/* lost the race, try later */
-				err = -EBUSY;
-				p->rdev = rdev;
-				goto abort;
-			}
-		}
 		if (conf->mirrors[conf->raid_disks + number].rdev) {
 			/* We just removed a device that is being replaced.
 			 * Move down the replacement.  We drain all IO before
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index b7b0a573e7f8b..6e828a6aa0b0a 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2247,15 +2247,6 @@ static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 		goto abort;
 	}
 	*rdevp = NULL;
-	if (!test_bit(RemoveSynchronized, &rdev->flags)) {
-		synchronize_rcu();
-		if (atomic_read(&rdev->nr_pending)) {
-			/* lost the race, try later */
-			err = -EBUSY;
-			*rdevp = rdev;
-			goto abort;
-		}
-	}
 	if (p->replacement) {
 		/* We must have just cleared 'rdev' */
 		p->rdev = p->replacement;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6fe334bb954ab..f03e4231bec11 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -8241,15 +8241,6 @@ static int raid5_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 		goto abort;
 	}
 	*rdevp = NULL;
-	if (!test_bit(RemoveSynchronized, &rdev->flags)) {
-		lockdep_assert_held(&mddev->reconfig_mutex);
-		synchronize_rcu();
-		if (atomic_read(&rdev->nr_pending)) {
-			/* lost the race, try later */
-			err = -EBUSY;
-			rcu_assign_pointer(*rdevp, rdev);
-		}
-	}
 	if (!err) {
 		err = log_modify(conf, rdev, false);
 		if (err)
-- 
2.43.0

[PATCH 6.7 113/713] md/raid1: remove rcu protection to access rdev from conf

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 2d32777d60de81aa020a2431567020af26564c71 ]

Because it's safe to accees rdev from conf:
 - If any spinlock is held, because synchronize_rcu() from
   md_kick_rdev_from_array() will prevent 'rdev' to be freed until
   spinlock is released;
 - If 'reconfig_lock' is held, because rdev can't be added or removed from
   array;
 - If there is normal IO inflight, because mddev_suspend() will prevent
   rdev to be added or removed from array;
 - If there is sync IO inflight, because 'MD_RECOVERY_RUNNING' is
   checked in remove_and_add_spares().

And these will cover all the scenarios in raid1.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-4-yukuai1@huaweicloud.com
Stable-dep-of: 257ac239ffcf ("md/raid1: fix choose next idle in read_balance()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 62 +++++++++++++++++-----------------------------
 1 file changed, 23 insertions(+), 39 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6bd42ccbea9c4..71bd372c14e2c 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -609,7 +609,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	int choose_first;
 	int choose_next_idle;
 
-	rcu_read_lock();
 	/*
 	 * Check if we can balance. We can balance on the whole
 	 * device if no resync is going on, or below the resync window.
@@ -642,7 +641,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		unsigned int pending;
 		bool nonrot;
 
-		rdev = rcu_dereference(conf->mirrors[disk].rdev);
+		rdev = conf->mirrors[disk].rdev;
 		if (r1_bio->bios[disk] == IO_BLOCKED
 		    || rdev == NULL
 		    || test_bit(Faulty, &rdev->flags))
@@ -773,7 +772,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	}
 
 	if (best_disk >= 0) {
-		rdev = rcu_dereference(conf->mirrors[best_disk].rdev);
+		rdev = conf->mirrors[best_disk].rdev;
 		if (!rdev)
 			goto retry;
 		atomic_inc(&rdev->nr_pending);
@@ -784,7 +783,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 
 		conf->mirrors[best_disk].next_seq_sect = this_sector + sectors;
 	}
-	rcu_read_unlock();
 	*max_sectors = sectors;
 
 	return best_disk;
@@ -1235,14 +1233,12 @@ static void raid1_read_request(struct mddev *mddev, struct bio *bio,
 
 	if (r1bio_existed) {
 		/* Need to get the block device name carefully */
-		struct md_rdev *rdev;
-		rcu_read_lock();
-		rdev = rcu_dereference(conf->mirrors[r1_bio->read_disk].rdev);
+		struct md_rdev *rdev = conf->mirrors[r1_bio->read_disk].rdev;
+
 		if (rdev)
 			snprintf(b, sizeof(b), "%pg", rdev->bdev);
 		else
 			strcpy(b, "???");
-		rcu_read_unlock();
 	}
 
 	/*
@@ -1396,10 +1392,9 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
 
 	disks = conf->raid_disks * 2;
 	blocked_rdev = NULL;
-	rcu_read_lock();
 	max_sectors = r1_bio->sectors;
 	for (i = 0;  i < disks; i++) {
-		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
+		struct md_rdev *rdev = conf->mirrors[i].rdev;
 
 		/*
 		 * The write-behind io is only attempted on drives marked as
@@ -1465,7 +1460,6 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
 		}
 		r1_bio->bios[i] = bio;
 	}
-	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
 		/* Wait for this device to become unblocked */
@@ -1617,15 +1611,16 @@ static void raid1_status(struct seq_file *seq, struct mddev *mddev)
 	struct r1conf *conf = mddev->private;
 	int i;
 
+	lockdep_assert_held(&mddev->lock);
+
 	seq_printf(seq, " [%d/%d] [", conf->raid_disks,
 		   conf->raid_disks - mddev->degraded);
-	rcu_read_lock();
 	for (i = 0; i < conf->raid_disks; i++) {
-		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
+		struct md_rdev *rdev = READ_ONCE(conf->mirrors[i].rdev);
+
 		seq_printf(seq, "%s",
 			   rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
 	}
-	rcu_read_unlock();
 	seq_printf(seq, "]");
 }
 
@@ -1691,16 +1686,15 @@ static void print_conf(struct r1conf *conf)
 	pr_debug(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded,
 		 conf->raid_disks);
 
-	rcu_read_lock();
+	lockdep_assert_held(&conf->mddev->reconfig_mutex);
 	for (i = 0; i < conf->raid_disks; i++) {
-		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
+		struct md_rdev *rdev = conf->mirrors[i].rdev;
 		if (rdev)
 			pr_debug(" disk %d, wo:%d, o:%d, dev:%pg\n",
 				 i, !test_bit(In_sync, &rdev->flags),
 				 !test_bit(Faulty, &rdev->flags),
 				 rdev->bdev);
 	}
-	rcu_read_unlock();
 }
 
 static void close_sync(struct r1conf *conf)
@@ -1810,7 +1804,7 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 			 */
 			if (rdev->saved_raid_disk < 0)
 				conf->fullsync = 1;
-			rcu_assign_pointer(p->rdev, rdev);
+			WRITE_ONCE(p->rdev, rdev);
 			break;
 		}
 		if (test_bit(WantReplacement, &p->rdev->flags) &&
@@ -1826,7 +1820,7 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 		rdev->raid_disk = repl_slot;
 		err = 0;
 		conf->fullsync = 1;
-		rcu_assign_pointer(p[conf->raid_disks].rdev, rdev);
+		WRITE_ONCE(p[conf->raid_disks].rdev, rdev);
 	}
 
 	print_conf(conf);
@@ -1862,7 +1856,7 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 			err = -EBUSY;
 			goto abort;
 		}
-		p->rdev = NULL;
+		WRITE_ONCE(p->rdev, NULL);
 		if (conf->mirrors[conf->raid_disks + number].rdev) {
 			/* We just removed a device that is being replaced.
 			 * Move down the replacement.  We drain all IO before
@@ -1883,7 +1877,7 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 				goto abort;
 			}
 			clear_bit(Replacement, &repl->flags);
-			p->rdev = repl;
+			WRITE_ONCE(p->rdev, repl);
 			conf->mirrors[conf->raid_disks + number].rdev = NULL;
 			unfreeze_array(conf);
 		}
@@ -2281,8 +2275,7 @@ static void fix_read_error(struct r1conf *conf, int read_disk,
 			sector_t first_bad;
 			int bad_sectors;
 
-			rcu_read_lock();
-			rdev = rcu_dereference(conf->mirrors[d].rdev);
+			rdev = conf->mirrors[d].rdev;
 			if (rdev &&
 			    (test_bit(In_sync, &rdev->flags) ||
 			     (!test_bit(Faulty, &rdev->flags) &&
@@ -2290,15 +2283,14 @@ static void fix_read_error(struct r1conf *conf, int read_disk,
 			    is_badblock(rdev, sect, s,
 					&first_bad, &bad_sectors) == 0) {
 				atomic_inc(&rdev->nr_pending);
-				rcu_read_unlock();
 				if (sync_page_io(rdev, sect, s<<9,
 					 conf->tmppage, REQ_OP_READ, false))
 					success = 1;
 				rdev_dec_pending(rdev, mddev);
 				if (success)
 					break;
-			} else
-				rcu_read_unlock();
+			}
+
 			d++;
 			if (d == conf->raid_disks * 2)
 				d = 0;
@@ -2317,29 +2309,24 @@ static void fix_read_error(struct r1conf *conf, int read_disk,
 			if (d==0)
 				d = conf->raid_disks * 2;
 			d--;
-			rcu_read_lock();
-			rdev = rcu_dereference(conf->mirrors[d].rdev);
+			rdev = conf->mirrors[d].rdev;
 			if (rdev &&
 			    !test_bit(Faulty, &rdev->flags)) {
 				atomic_inc(&rdev->nr_pending);
-				rcu_read_unlock();
 				r1_sync_page_io(rdev, sect, s,
 						conf->tmppage, REQ_OP_WRITE);
 				rdev_dec_pending(rdev, mddev);
-			} else
-				rcu_read_unlock();
+			}
 		}
 		d = start;
 		while (d != read_disk) {
 			if (d==0)
 				d = conf->raid_disks * 2;
 			d--;
-			rcu_read_lock();
-			rdev = rcu_dereference(conf->mirrors[d].rdev);
+			rdev = conf->mirrors[d].rdev;
 			if (rdev &&
 			    !test_bit(Faulty, &rdev->flags)) {
 				atomic_inc(&rdev->nr_pending);
-				rcu_read_unlock();
 				if (r1_sync_page_io(rdev, sect, s,
 						conf->tmppage, REQ_OP_READ)) {
 					atomic_add(s, &rdev->corrected_errors);
@@ -2350,8 +2337,7 @@ static void fix_read_error(struct r1conf *conf, int read_disk,
 						rdev->bdev);
 				}
 				rdev_dec_pending(rdev, mddev);
-			} else
-				rcu_read_unlock();
+			}
 		}
 		sectors -= s;
 		sect += s;
@@ -2732,7 +2718,6 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
 
 	r1_bio = raid1_alloc_init_r1buf(conf);
 
-	rcu_read_lock();
 	/*
 	 * If we get a correctably read error during resync or recovery,
 	 * we might want to read from a different device.  So we
@@ -2753,7 +2738,7 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
 		struct md_rdev *rdev;
 		bio = r1_bio->bios[i];
 
-		rdev = rcu_dereference(conf->mirrors[i].rdev);
+		rdev = conf->mirrors[i].rdev;
 		if (rdev == NULL ||
 		    test_bit(Faulty, &rdev->flags)) {
 			if (i < conf->raid_disks)
@@ -2811,7 +2796,6 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
 				bio->bi_opf |= MD_FAILFAST;
 		}
 	}
-	rcu_read_unlock();
 	if (disk < 0)
 		disk = wonly;
 	r1_bio->read_disk = disk;
-- 
2.43.0

[PATCH 6.7 114/713] md/raid1: factor out helpers to add rdev to conf

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 969d6589abcb369d53d84ec7c9c37f4b23ec1ad9 ]

There are no functional changes, just make code cleaner and prepare to
record disk non-rotational information while adding and removing rdev to
conf

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240229095714.926789-3-yukuai1@huaweicloud.com
Stable-dep-of: 257ac239ffcf ("md/raid1: fix choose next idle in read_balance()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 85 +++++++++++++++++++++++++++++-----------------
 1 file changed, 53 insertions(+), 32 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 71bd372c14e2c..57e2487a03507 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1761,6 +1761,44 @@ static int raid1_spare_active(struct mddev *mddev)
 	return count;
 }
 
+static bool raid1_add_conf(struct r1conf *conf, struct md_rdev *rdev, int disk,
+			   bool replacement)
+{
+	struct raid1_info *info = conf->mirrors + disk;
+
+	if (replacement)
+		info += conf->raid_disks;
+
+	if (info->rdev)
+		return false;
+
+	rdev->raid_disk = disk;
+	info->head_position = 0;
+	info->seq_start = MaxSector;
+	WRITE_ONCE(info->rdev, rdev);
+
+	return true;
+}
+
+static bool raid1_remove_conf(struct r1conf *conf, int disk)
+{
+	struct raid1_info *info = conf->mirrors + disk;
+	struct md_rdev *rdev = info->rdev;
+
+	if (!rdev || test_bit(In_sync, &rdev->flags) ||
+	    atomic_read(&rdev->nr_pending))
+		return false;
+
+	/* Only remove non-faulty devices if recovery is not possible. */
+	if (!test_bit(Faulty, &rdev->flags) &&
+	    rdev->mddev->recovery_disabled != conf->recovery_disabled &&
+	    rdev->mddev->degraded < conf->raid_disks)
+		return false;
+
+	WRITE_ONCE(info->rdev, NULL);
+	return true;
+}
+
 static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 {
 	struct r1conf *conf = mddev->private;
@@ -1796,15 +1834,13 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 				disk_stack_limits(mddev->gendisk, rdev->bdev,
 						  rdev->data_offset << 9);
 
-			p->head_position = 0;
-			rdev->raid_disk = mirror;
+			raid1_add_conf(conf, rdev, mirror, false);
 			err = 0;
 			/* As all devices are equivalent, we don't need a full recovery
 			 * if this was recently any drive of the array
 			 */
 			if (rdev->saved_raid_disk < 0)
 				conf->fullsync = 1;
-			WRITE_ONCE(p->rdev, rdev);
 			break;
 		}
 		if (test_bit(WantReplacement, &p->rdev->flags) &&
@@ -1814,13 +1850,11 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 
 	if (err && repl_slot >= 0) {
 		/* Add this device as a replacement */
-		p = conf->mirrors + repl_slot;
 		clear_bit(In_sync, &rdev->flags);
 		set_bit(Replacement, &rdev->flags);
-		rdev->raid_disk = repl_slot;
+		raid1_add_conf(conf, rdev, repl_slot, true);
 		err = 0;
 		conf->fullsync = 1;
-		WRITE_ONCE(p[conf->raid_disks].rdev, rdev);
 	}
 
 	print_conf(conf);
@@ -1837,27 +1871,20 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 	if (unlikely(number >= conf->raid_disks))
 		goto abort;
 
-	if (rdev != p->rdev)
-		p = conf->mirrors + conf->raid_disks + number;
+	if (rdev != p->rdev) {
+		number += conf->raid_disks;
+		p = conf->mirrors + number;
+	}
 
 	print_conf(conf);
 	if (rdev == p->rdev) {
-		if (test_bit(In_sync, &rdev->flags) ||
-		    atomic_read(&rdev->nr_pending)) {
-			err = -EBUSY;
-			goto abort;
-		}
-		/* Only remove non-faulty devices if recovery
-		 * is not possible.
-		 */
-		if (!test_bit(Faulty, &rdev->flags) &&
-		    mddev->recovery_disabled != conf->recovery_disabled &&
-		    mddev->degraded < conf->raid_disks) {
+		if (!raid1_remove_conf(conf, number)) {
 			err = -EBUSY;
 			goto abort;
 		}
-		WRITE_ONCE(p->rdev, NULL);
-		if (conf->mirrors[conf->raid_disks + number].rdev) {
+
+		if (number < conf->raid_disks &&
+		    conf->mirrors[conf->raid_disks + number].rdev) {
 			/* We just removed a device that is being replaced.
 			 * Move down the replacement.  We drain all IO before
 			 * doing this to avoid confusion.
@@ -3000,23 +3027,17 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 
 	err = -EINVAL;
 	spin_lock_init(&conf->device_lock);
+	conf->raid_disks = mddev->raid_disks;
 	rdev_for_each(rdev, mddev) {
 		int disk_idx = rdev->raid_disk;
-		if (disk_idx >= mddev->raid_disks
-		    || disk_idx < 0)
+
+		if (disk_idx >= conf->raid_disks || disk_idx < 0)
 			continue;
-		if (test_bit(Replacement, &rdev->flags))
-			disk = conf->mirrors + mddev->raid_disks + disk_idx;
-		else
-			disk = conf->mirrors + disk_idx;
 
-		if (disk->rdev)
+		if (!raid1_add_conf(conf, rdev, disk_idx,
+				    test_bit(Replacement, &rdev->flags)))
 			goto abort;
-		disk->rdev = rdev;
-		disk->head_position = 0;
-		disk->seq_start = MaxSector;
 	}
-	conf->raid_disks = mddev->raid_disks;
 	conf->mddev = mddev;
 	INIT_LIST_HEAD(&conf->retry_list);
 	INIT_LIST_HEAD(&conf->bio_end_io_list);
-- 
2.43.0

[PATCH 6.7 115/713] md/raid1: record nonrot rdevs while adding/removing rdevs to conf

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 2c27d09d3a76b33629d2e681bf8b774f776ade7f ]

For raid1, each read will iterate all the rdevs from conf and check if
any rdev is non-rotational, then choose rdev with minimal IO inflight
if so, or rdev with closest distance otherwise.

Disk nonrot info can be changed through sysfs entry:

/sys/block/[disk_name]/queue/rotational

However, consider that this should only be used for testing, and user
really shouldn't do this in real life. Record the number of non-rotational
disks in conf, to avoid checking each rdev in IO fast path and simplify
read_balance() a little bit.

Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com>
Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240229095714.926789-4-yukuai1@huaweicloud.com
Stable-dep-of: 257ac239ffcf ("md/raid1: fix choose next idle in read_balance()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.h    |  1 +
 drivers/md/raid1.c | 17 ++++++++++-------
 drivers/md/raid1.h |  1 +
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/md/md.h b/drivers/md/md.h
index 8d881cc597992..27d187ca6258a 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -207,6 +207,7 @@ enum flag_bits {
 				 * check if there is collision between raid1
 				 * serial bios.
 				 */
+	Nonrot,			/* non-rotational device (SSD) */
 };
 
 static inline int is_badblock(struct md_rdev *rdev, sector_t s, int sectors,
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 57e2487a03507..27d15b640eff3 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -601,7 +601,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	int sectors;
 	int best_good_sectors;
 	int best_disk, best_dist_disk, best_pending_disk;
-	int has_nonrot_disk;
 	int disk;
 	sector_t best_dist;
 	unsigned int min_pending;
@@ -622,7 +621,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	best_pending_disk = -1;
 	min_pending = UINT_MAX;
 	best_good_sectors = 0;
-	has_nonrot_disk = 0;
 	choose_next_idle = 0;
 	clear_bit(R1BIO_FailFast, &r1_bio->state);
 
@@ -639,7 +637,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		sector_t first_bad;
 		int bad_sectors;
 		unsigned int pending;
-		bool nonrot;
 
 		rdev = conf->mirrors[disk].rdev;
 		if (r1_bio->bios[disk] == IO_BLOCKED
@@ -705,8 +702,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			/* At least two disks to choose from so failfast is OK */
 			set_bit(R1BIO_FailFast, &r1_bio->state);
 
-		nonrot = bdev_nonrot(rdev->bdev);
-		has_nonrot_disk |= nonrot;
 		pending = atomic_read(&rdev->nr_pending);
 		dist = abs(this_sector - conf->mirrors[disk].head_position);
 		if (choose_first) {
@@ -733,7 +728,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			 * small, but not a big deal since when the second disk
 			 * starts IO, the first disk is likely still busy.
 			 */
-			if (nonrot && opt_iosize > 0 &&
+			if (test_bit(Nonrot, &rdev->flags) && opt_iosize > 0 &&
 			    mirror->seq_start != MaxSector &&
 			    mirror->next_seq_sect > opt_iosize &&
 			    mirror->next_seq_sect - opt_iosize >=
@@ -765,7 +760,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	 * mixed ratation/non-rotational disks depending on workload.
 	 */
 	if (best_disk == -1) {
-		if (has_nonrot_disk || min_pending == 0)
+		if (READ_ONCE(conf->nonrot_disks) || min_pending == 0)
 			best_disk = best_pending_disk;
 		else
 			best_disk = best_dist_disk;
@@ -1772,6 +1767,11 @@ static bool raid1_add_conf(struct r1conf *conf, struct md_rdev *rdev, int disk,
 	if (info->rdev)
 		return false;
 
+	if (bdev_nonrot(rdev->bdev)) {
+		set_bit(Nonrot, &rdev->flags);
+		WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks + 1);
+	}
+
 	rdev->raid_disk = disk;
 	info->head_position = 0;
 	info->seq_start = MaxSector;
@@ -1795,6 +1795,9 @@ static bool raid1_remove_conf(struct r1conf *conf, int disk)
 	    rdev->mddev->degraded < conf->raid_disks)
 		return false;
 
+	if (test_and_clear_bit(Nonrot, &rdev->flags))
+		WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks - 1);
+
 	WRITE_ONCE(info->rdev, NULL);
 	return true;
 }
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 14d4211a123a8..5300cbaa58a41 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -71,6 +71,7 @@ struct r1conf {
 						 * allow for replacements.
 						 */
 	int			raid_disks;
+	int			nonrot_disks;
 
 	spinlock_t		device_lock;
 
-- 
2.43.0

[PATCH 6.7 116/713] md/raid1: fix choose next idle in read_balance()

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 257ac239ffcfd097a9a0732bf5095fb00164f334 ]

Commit 12cee5a8a29e ("md/raid1: prevent merging too large request") add
the case choose next idle in read_balance():

read_balance:
 for_each_rdev
  if(next_seq_sect == this_sector || dist == 0)
  -> sequential reads
   best_disk = disk;
   if (...)
    choose_next_idle = 1
    continue;

 for_each_rdev
 -> iterate next rdev
  if (pending == 0)
   best_disk = disk;
   -> choose the next idle disk
   break;

  if (choose_next_idle)
   -> keep using this rdev if there are no other idle disk
   contine

However, commit 2e52d449bcec ("md/raid1: add failfast handling for reads.")
remove the code:

-               /* If device is idle, use it */
-               if (pending == 0) {
-                       best_disk = disk;
-                       break;
-               }

Hence choose next idle will never work now, fix this problem by
following:

1) don't set best_disk in this case, read_balance() will choose the best
   disk after iterating all the disks;
2) add 'pending' so that other idle disk will be chosen;
3) add a new local variable 'sequential_disk' to record the disk, and if
   there is no other idle disk, 'sequential_disk' will be chosen;

Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.")
Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com>
Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240229095714.926789-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid1.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 27d15b640eff3..750a802478e52 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -600,13 +600,12 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	const sector_t this_sector = r1_bio->sector;
 	int sectors;
 	int best_good_sectors;
-	int best_disk, best_dist_disk, best_pending_disk;
+	int best_disk, best_dist_disk, best_pending_disk, sequential_disk;
 	int disk;
 	sector_t best_dist;
 	unsigned int min_pending;
 	struct md_rdev *rdev;
 	int choose_first;
-	int choose_next_idle;
 
 	/*
 	 * Check if we can balance. We can balance on the whole
@@ -617,11 +616,11 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	sectors = r1_bio->sectors;
 	best_disk = -1;
 	best_dist_disk = -1;
+	sequential_disk = -1;
 	best_dist = MaxSector;
 	best_pending_disk = -1;
 	min_pending = UINT_MAX;
 	best_good_sectors = 0;
-	choose_next_idle = 0;
 	clear_bit(R1BIO_FailFast, &r1_bio->state);
 
 	if ((conf->mddev->recovery_cp < this_sector + sectors) ||
@@ -714,7 +713,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			int opt_iosize = bdev_io_opt(rdev->bdev) >> 9;
 			struct raid1_info *mirror = &conf->mirrors[disk];
 
-			best_disk = disk;
 			/*
 			 * If buffered sequential IO size exceeds optimal
 			 * iosize, check if there is idle disk. If yes, choose
@@ -733,15 +731,22 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			    mirror->next_seq_sect > opt_iosize &&
 			    mirror->next_seq_sect - opt_iosize >=
 			    mirror->seq_start) {
-				choose_next_idle = 1;
-				continue;
+				/*
+				 * Add 'pending' to avoid choosing this disk if
+				 * there is other idle disk.
+				 */
+				pending++;
+				/*
+				 * If there is no other idle disk, this disk
+				 * will be chosen.
+				 */
+				sequential_disk = disk;
+			} else {
+				best_disk = disk;
+				break;
 			}
-			break;
 		}
 
-		if (choose_next_idle)
-			continue;
-
 		if (min_pending > pending) {
 			min_pending = pending;
 			best_pending_disk = disk;
@@ -753,6 +758,13 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		}
 	}
 
+	/*
+	 * sequential IO size exceeds optimal iosize, however, there is no other
+	 * idle disk, so choose the sequential disk.
+	 */
+	if (best_disk == -1 && min_pending != 0)
+		best_disk = sequential_disk;
+
 	/*
 	 * If all disks are rotational, choose the closest disk. If any disk is
 	 * non-rotational, choose the disk with less pending request even the
-- 
2.43.0

[PATCH 6.7 117/713] io_uring/net: unify how recvmsg and sendmsg copy in the msghdr

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 52307ac4f2b507f60bae6df5be938d35e199c688 ]

For recvmsg, we roll our own since we support buffer selections. This
isn't the case for sendmsg right now, but in preparation for doing so,
make the recvmsg copy helpers generic so we can call them from the
sendmsg side as well.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8ede3db5061b ("io_uring/net: fix overflow check in io_recvmsg_mshot_prep()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/net.c | 271 ++++++++++++++++++++++++++-----------------------
 1 file changed, 142 insertions(+), 129 deletions(-)

diff --git a/io_uring/net.c b/io_uring/net.c
index 161622029147c..ef495e2aac2bc 100644
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -204,16 +204,150 @@ static int io_setup_async_msg(struct io_kiocb *req,
 	return -EAGAIN;
 }
 
+static bool io_recvmsg_multishot_overflow(struct io_async_msghdr *iomsg)
+{
+	int hdr;
+
+	if (iomsg->namelen < 0)
+		return true;
+	if (check_add_overflow((int)sizeof(struct io_uring_recvmsg_out),
+			       iomsg->namelen, &hdr))
+		return true;
+	if (check_add_overflow(hdr, (int)iomsg->controllen, &hdr))
+		return true;
+
+	return false;
+}
+
+#ifdef CONFIG_COMPAT
+static int __io_compat_msg_copy_hdr(struct io_kiocb *req,
+				    struct io_async_msghdr *iomsg,
+				    struct sockaddr __user **addr, int ddir)
+{
+	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
+	struct compat_msghdr msg;
+	struct compat_iovec __user *uiov;
+	int ret;
+
+	if (copy_from_user(&msg, sr->umsg_compat, sizeof(msg)))
+		return -EFAULT;
+
+	ret = __get_compat_msghdr(&iomsg->msg, &msg, addr);
+	if (ret)
+		return ret;
+
+	uiov = compat_ptr(msg.msg_iov);
+	if (req->flags & REQ_F_BUFFER_SELECT) {
+		compat_ssize_t clen;
+
+		iomsg->free_iov = NULL;
+		if (msg.msg_iovlen == 0) {
+			sr->len = 0;
+		} else if (msg.msg_iovlen > 1) {
+			return -EINVAL;
+		} else {
+			if (!access_ok(uiov, sizeof(*uiov)))
+				return -EFAULT;
+			if (__get_user(clen, &uiov->iov_len))
+				return -EFAULT;
+			if (clen < 0)
+				return -EINVAL;
+			sr->len = clen;
+		}
+
+		if (ddir == ITER_DEST && req->flags & REQ_F_APOLL_MULTISHOT) {
+			iomsg->namelen = msg.msg_namelen;
+			iomsg->controllen = msg.msg_controllen;
+			if (io_recvmsg_multishot_overflow(iomsg))
+				return -EOVERFLOW;
+		}
+
+		return 0;
+	}
+
+	iomsg->free_iov = iomsg->fast_iov;
+	ret = __import_iovec(ddir, (struct iovec __user *)uiov, msg.msg_iovlen,
+				UIO_FASTIOV, &iomsg->free_iov,
+				&iomsg->msg.msg_iter, true);
+	if (unlikely(ret < 0))
+		return ret;
+
+	return 0;
+}
+#endif
+
+static int __io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg,
+			     struct sockaddr __user **addr, int ddir)
+{
+	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
+	struct user_msghdr msg;
+	int ret;
+
+	if (copy_from_user(&msg, sr->umsg, sizeof(*sr->umsg)))
+		return -EFAULT;
+
+	ret = __copy_msghdr(&iomsg->msg, &msg, addr);
+	if (ret)
+		return ret;
+
+	if (req->flags & REQ_F_BUFFER_SELECT) {
+		if (msg.msg_iovlen == 0) {
+			sr->len = iomsg->fast_iov[0].iov_len = 0;
+			iomsg->fast_iov[0].iov_base = NULL;
+			iomsg->free_iov = NULL;
+		} else if (msg.msg_iovlen > 1) {
+			return -EINVAL;
+		} else {
+			if (copy_from_user(iomsg->fast_iov, msg.msg_iov,
+					   sizeof(*msg.msg_iov)))
+				return -EFAULT;
+			sr->len = iomsg->fast_iov[0].iov_len;
+			iomsg->free_iov = NULL;
+		}
+
+		if (ddir == ITER_DEST && req->flags & REQ_F_APOLL_MULTISHOT) {
+			iomsg->namelen = msg.msg_namelen;
+			iomsg->controllen = msg.msg_controllen;
+			if (io_recvmsg_multishot_overflow(iomsg))
+				return -EOVERFLOW;
+		}
+
+		return 0;
+	}
+
+	iomsg->free_iov = iomsg->fast_iov;
+	ret = __import_iovec(ddir, msg.msg_iov, msg.msg_iovlen, UIO_FASTIOV,
+				&iomsg->free_iov, &iomsg->msg.msg_iter, false);
+	if (unlikely(ret < 0))
+		return ret;
+
+	return 0;
+}
+
+static int io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg,
+			   struct sockaddr __user **addr, int ddir)
+{
+	iomsg->msg.msg_name = &iomsg->addr;
+	iomsg->msg.msg_iter.nr_segs = 0;
+
+#ifdef CONFIG_COMPAT
+	if (req->ctx->compat)
+		return __io_compat_msg_copy_hdr(req, iomsg, addr, ddir);
+#endif
+
+	return __io_msg_copy_hdr(req, iomsg, addr, ddir);
+}
+
 static int io_sendmsg_copy_hdr(struct io_kiocb *req,
 			       struct io_async_msghdr *iomsg)
 {
 	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
 	int ret;
 
-	iomsg->msg.msg_name = &iomsg->addr;
-	iomsg->free_iov = iomsg->fast_iov;
-	ret = sendmsg_copy_msghdr(&iomsg->msg, sr->umsg, sr->msg_flags,
-					&iomsg->free_iov);
+	ret = io_msg_copy_hdr(req, iomsg, NULL, ITER_SOURCE);
+	if (ret)
+		return ret;
+
 	/* save msg_control as sys_sendmsg() overwrites it */
 	sr->msg_control = iomsg->msg.msg_control_user;
 	return ret;
@@ -435,142 +569,21 @@ int io_send(struct io_kiocb *req, unsigned int issue_flags)
 	return IOU_OK;
 }
 
-static bool io_recvmsg_multishot_overflow(struct io_async_msghdr *iomsg)
-{
-	int hdr;
-
-	if (iomsg->namelen < 0)
-		return true;
-	if (check_add_overflow((int)sizeof(struct io_uring_recvmsg_out),
-			       iomsg->namelen, &hdr))
-		return true;
-	if (check_add_overflow(hdr, (int)iomsg->controllen, &hdr))
-		return true;
-
-	return false;
-}
-
-static int __io_recvmsg_copy_hdr(struct io_kiocb *req,
-				 struct io_async_msghdr *iomsg)
-{
-	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
-	struct user_msghdr msg;
-	int ret;
-
-	if (copy_from_user(&msg, sr->umsg, sizeof(*sr->umsg)))
-		return -EFAULT;
-
-	ret = __copy_msghdr(&iomsg->msg, &msg, &iomsg->uaddr);
-	if (ret)
-		return ret;
-
-	if (req->flags & REQ_F_BUFFER_SELECT) {
-		if (msg.msg_iovlen == 0) {
-			sr->len = iomsg->fast_iov[0].iov_len = 0;
-			iomsg->fast_iov[0].iov_base = NULL;
-			iomsg->free_iov = NULL;
-		} else if (msg.msg_iovlen > 1) {
-			return -EINVAL;
-		} else {
-			if (copy_from_user(iomsg->fast_iov, msg.msg_iov, sizeof(*msg.msg_iov)))
-				return -EFAULT;
-			sr->len = iomsg->fast_iov[0].iov_len;
-			iomsg->free_iov = NULL;
-		}
-
-		if (req->flags & REQ_F_APOLL_MULTISHOT) {
-			iomsg->namelen = msg.msg_namelen;
-			iomsg->controllen = msg.msg_controllen;
-			if (io_recvmsg_multishot_overflow(iomsg))
-				return -EOVERFLOW;
-		}
-	} else {
-		iomsg->free_iov = iomsg->fast_iov;
-		ret = __import_iovec(ITER_DEST, msg.msg_iov, msg.msg_iovlen, UIO_FASTIOV,
-				     &iomsg->free_iov, &iomsg->msg.msg_iter,
-				     false);
-		if (ret > 0)
-			ret = 0;
-	}
-
-	return ret;
-}
-
-#ifdef CONFIG_COMPAT
-static int __io_compat_recvmsg_copy_hdr(struct io_kiocb *req,
-					struct io_async_msghdr *iomsg)
-{
-	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
-	struct compat_msghdr msg;
-	struct compat_iovec __user *uiov;
-	int ret;
-
-	if (copy_from_user(&msg, sr->umsg_compat, sizeof(msg)))
-		return -EFAULT;
-
-	ret = __get_compat_msghdr(&iomsg->msg, &msg, &iomsg->uaddr);
-	if (ret)
-		return ret;
-
-	uiov = compat_ptr(msg.msg_iov);
-	if (req->flags & REQ_F_BUFFER_SELECT) {
-		compat_ssize_t clen;
-
-		iomsg->free_iov = NULL;
-		if (msg.msg_iovlen == 0) {
-			sr->len = 0;
-		} else if (msg.msg_iovlen > 1) {
-			return -EINVAL;
-		} else {
-			if (!access_ok(uiov, sizeof(*uiov)))
-				return -EFAULT;
-			if (__get_user(clen, &uiov->iov_len))
-				return -EFAULT;
-			if (clen < 0)
-				return -EINVAL;
-			sr->len = clen;
-		}
-
-		if (req->flags & REQ_F_APOLL_MULTISHOT) {
-			iomsg->namelen = msg.msg_namelen;
-			iomsg->controllen = msg.msg_controllen;
-			if (io_recvmsg_multishot_overflow(iomsg))
-				return -EOVERFLOW;
-		}
-	} else {
-		iomsg->free_iov = iomsg->fast_iov;
-		ret = __import_iovec(ITER_DEST, (struct iovec __user *)uiov, msg.msg_iovlen,
-				   UIO_FASTIOV, &iomsg->free_iov,
-				   &iomsg->msg.msg_iter, true);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
-
 static int io_recvmsg_copy_hdr(struct io_kiocb *req,
 			       struct io_async_msghdr *iomsg)
 {
-	iomsg->msg.msg_name = &iomsg->addr;
-	iomsg->msg.msg_iter.nr_segs = 0;
-
-#ifdef CONFIG_COMPAT
-	if (req->ctx->compat)
-		return __io_compat_recvmsg_copy_hdr(req, iomsg);
-#endif
-
-	return __io_recvmsg_copy_hdr(req, iomsg);
+	return io_msg_copy_hdr(req, iomsg, &iomsg->uaddr, ITER_DEST);
 }
 
 int io_recvmsg_prep_async(struct io_kiocb *req)
 {
+	struct io_async_msghdr *iomsg;
 	int ret;
 
 	if (!io_msg_alloc_async_prep(req))
 		return -ENOMEM;
-	ret = io_recvmsg_copy_hdr(req, req->async_data);
+	iomsg = req->async_data;
+	ret = io_recvmsg_copy_hdr(req, iomsg);
 	if (!ret)
 		req->flags |= REQ_F_NEED_CLEANUP;
 	return ret;
-- 
2.43.0

[PATCH 6.7 118/713] io_uring/net: move receive multishot out of the generic msghdr path

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit c55978024d123d43808ab393a0a4ce3ce8568150 ]

Move the actual user_msghdr / compat_msghdr into the send and receive
sides, respectively, so we can move the uaddr receive handling into its
own handler, and ditto the multishot with buffer selection logic.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8ede3db5061b ("io_uring/net: fix overflow check in io_recvmsg_mshot_prep()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/net.c | 161 ++++++++++++++++++++++++++++---------------------
 1 file changed, 91 insertions(+), 70 deletions(-)

diff --git a/io_uring/net.c b/io_uring/net.c
index ef495e2aac2bc..1d9bfde71809a 100644
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -204,46 +204,26 @@ static int io_setup_async_msg(struct io_kiocb *req,
 	return -EAGAIN;
 }
 
-static bool io_recvmsg_multishot_overflow(struct io_async_msghdr *iomsg)
-{
-	int hdr;
-
-	if (iomsg->namelen < 0)
-		return true;
-	if (check_add_overflow((int)sizeof(struct io_uring_recvmsg_out),
-			       iomsg->namelen, &hdr))
-		return true;
-	if (check_add_overflow(hdr, (int)iomsg->controllen, &hdr))
-		return true;
-
-	return false;
-}
-
 #ifdef CONFIG_COMPAT
-static int __io_compat_msg_copy_hdr(struct io_kiocb *req,
-				    struct io_async_msghdr *iomsg,
-				    struct sockaddr __user **addr, int ddir)
+static int io_compat_msg_copy_hdr(struct io_kiocb *req,
+				  struct io_async_msghdr *iomsg,
+				  struct compat_msghdr *msg, int ddir)
 {
 	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
-	struct compat_msghdr msg;
 	struct compat_iovec __user *uiov;
 	int ret;
 
-	if (copy_from_user(&msg, sr->umsg_compat, sizeof(msg)))
+	if (copy_from_user(msg, sr->umsg_compat, sizeof(*msg)))
 		return -EFAULT;
 
-	ret = __get_compat_msghdr(&iomsg->msg, &msg, addr);
-	if (ret)
-		return ret;
-
-	uiov = compat_ptr(msg.msg_iov);
+	uiov = compat_ptr(msg->msg_iov);
 	if (req->flags & REQ_F_BUFFER_SELECT) {
 		compat_ssize_t clen;
 
 		iomsg->free_iov = NULL;
-		if (msg.msg_iovlen == 0) {
+		if (msg->msg_iovlen == 0) {
 			sr->len = 0;
-		} else if (msg.msg_iovlen > 1) {
+		} else if (msg->msg_iovlen > 1) {
 			return -EINVAL;
 		} else {
 			if (!access_ok(uiov, sizeof(*uiov)))
@@ -255,18 +235,11 @@ static int __io_compat_msg_copy_hdr(struct io_kiocb *req,
 			sr->len = clen;
 		}
 
-		if (ddir == ITER_DEST && req->flags & REQ_F_APOLL_MULTISHOT) {
-			iomsg->namelen = msg.msg_namelen;
-			iomsg->controllen = msg.msg_controllen;
-			if (io_recvmsg_multishot_overflow(iomsg))
-				return -EOVERFLOW;
-		}
-
 		return 0;
 	}
 
 	iomsg->free_iov = iomsg->fast_iov;
-	ret = __import_iovec(ddir, (struct iovec __user *)uiov, msg.msg_iovlen,
+	ret = __import_iovec(ddir, (struct iovec __user *)uiov, msg->msg_iovlen,
 				UIO_FASTIOV, &iomsg->free_iov,
 				&iomsg->msg.msg_iter, true);
 	if (unlikely(ret < 0))
@@ -276,47 +249,35 @@ static int __io_compat_msg_copy_hdr(struct io_kiocb *req,
 }
 #endif
 
-static int __io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg,
-			     struct sockaddr __user **addr, int ddir)
+static int io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg,
+			   struct user_msghdr *msg, int ddir)
 {
 	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
-	struct user_msghdr msg;
 	int ret;
 
-	if (copy_from_user(&msg, sr->umsg, sizeof(*sr->umsg)))
+	if (copy_from_user(msg, sr->umsg, sizeof(*sr->umsg)))
 		return -EFAULT;
 
-	ret = __copy_msghdr(&iomsg->msg, &msg, addr);
-	if (ret)
-		return ret;
-
 	if (req->flags & REQ_F_BUFFER_SELECT) {
-		if (msg.msg_iovlen == 0) {
+		if (msg->msg_iovlen == 0) {
 			sr->len = iomsg->fast_iov[0].iov_len = 0;
 			iomsg->fast_iov[0].iov_base = NULL;
 			iomsg->free_iov = NULL;
-		} else if (msg.msg_iovlen > 1) {
+		} else if (msg->msg_iovlen > 1) {
 			return -EINVAL;
 		} else {
-			if (copy_from_user(iomsg->fast_iov, msg.msg_iov,
-					   sizeof(*msg.msg_iov)))
+			if (copy_from_user(iomsg->fast_iov, msg->msg_iov,
+					   sizeof(*msg->msg_iov)))
 				return -EFAULT;
 			sr->len = iomsg->fast_iov[0].iov_len;
 			iomsg->free_iov = NULL;
 		}
 
-		if (ddir == ITER_DEST && req->flags & REQ_F_APOLL_MULTISHOT) {
-			iomsg->namelen = msg.msg_namelen;
-			iomsg->controllen = msg.msg_controllen;
-			if (io_recvmsg_multishot_overflow(iomsg))
-				return -EOVERFLOW;
-		}
-
 		return 0;
 	}
 
 	iomsg->free_iov = iomsg->fast_iov;
-	ret = __import_iovec(ddir, msg.msg_iov, msg.msg_iovlen, UIO_FASTIOV,
+	ret = __import_iovec(ddir, msg->msg_iov, msg->msg_iovlen, UIO_FASTIOV,
 				&iomsg->free_iov, &iomsg->msg.msg_iter, false);
 	if (unlikely(ret < 0))
 		return ret;
@@ -324,30 +285,34 @@ static int __io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg
 	return 0;
 }
 
-static int io_msg_copy_hdr(struct io_kiocb *req, struct io_async_msghdr *iomsg,
-			   struct sockaddr __user **addr, int ddir)
+static int io_sendmsg_copy_hdr(struct io_kiocb *req,
+			       struct io_async_msghdr *iomsg)
 {
+	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
+	struct user_msghdr msg;
+	int ret;
+
 	iomsg->msg.msg_name = &iomsg->addr;
 	iomsg->msg.msg_iter.nr_segs = 0;
 
 #ifdef CONFIG_COMPAT
-	if (req->ctx->compat)
-		return __io_compat_msg_copy_hdr(req, iomsg, addr, ddir);
-#endif
+	if (unlikely(req->ctx->compat)) {
+		struct compat_msghdr cmsg;
 
-	return __io_msg_copy_hdr(req, iomsg, addr, ddir);
-}
+		ret = io_compat_msg_copy_hdr(req, iomsg, &cmsg, ITER_SOURCE);
+		if (unlikely(ret))
+			return ret;
 
-static int io_sendmsg_copy_hdr(struct io_kiocb *req,
-			       struct io_async_msghdr *iomsg)
-{
-	struct io_sr_msg *sr = io_kiocb_to_cmd(req, struct io_sr_msg);
-	int ret;
+		return __get_compat_msghdr(&iomsg->msg, &cmsg, NULL);
+	}
+#endif
 
-	ret = io_msg_copy_hdr(req, iomsg, NULL, ITER_SOURCE);
-	if (ret)
+	ret = io_msg_copy_hdr(req, iomsg, &msg, ITER_SOURCE);
+	if (unlikely(ret))
 		return ret;
 
+	ret = __copy_msghdr(&iomsg->msg, &msg, NULL);
+
 	/* save msg_control as sys_sendmsg() overwrites it */
 	sr->msg_control = iomsg->msg.msg_control_user;
 	return ret;
@@ -569,10 +534,66 @@ int io_send(struct io_kiocb *req, unsigned int issue_flags)
 	return IOU_OK;
 }
 
+static int io_recvmsg_mshot_prep(struct io_kiocb *req,
+				 struct io_async_msghdr *iomsg,
+				 size_t namelen, size_t controllen)
+{
+	if ((req->flags & (REQ_F_APOLL_MULTISHOT|REQ_F_BUFFER_SELECT)) ==
+			  (REQ_F_APOLL_MULTISHOT|REQ_F_BUFFER_SELECT)) {
+		int hdr;
+
+		if (unlikely(namelen < 0))
+			return -EOVERFLOW;
+		if (check_add_overflow((int)sizeof(struct io_uring_recvmsg_out),
+					namelen, &hdr))
+			return -EOVERFLOW;
+		if (check_add_overflow(hdr, (int)controllen, &hdr))
+			return -EOVERFLOW;
+
+		iomsg->namelen = namelen;
+		iomsg->controllen = controllen;
+		return 0;
+	}
+
+	return 0;
+}
+
 static int io_recvmsg_copy_hdr(struct io_kiocb *req,
 			       struct io_async_msghdr *iomsg)
 {
-	return io_msg_copy_hdr(req, iomsg, &iomsg->uaddr, ITER_DEST);
+	struct user_msghdr msg;
+	int ret;
+
+	iomsg->msg.msg_name = &iomsg->addr;
+	iomsg->msg.msg_iter.nr_segs = 0;
+
+#ifdef CONFIG_COMPAT
+	if (unlikely(req->ctx->compat)) {
+		struct compat_msghdr cmsg;
+
+		ret = io_compat_msg_copy_hdr(req, iomsg, &cmsg, ITER_DEST);
+		if (unlikely(ret))
+			return ret;
+
+		ret = __get_compat_msghdr(&iomsg->msg, &cmsg, &iomsg->uaddr);
+		if (unlikely(ret))
+			return ret;
+
+		return io_recvmsg_mshot_prep(req, iomsg, cmsg.msg_namelen,
+						cmsg.msg_controllen);
+	}
+#endif
+
+	ret = io_msg_copy_hdr(req, iomsg, &msg, ITER_DEST);
+	if (unlikely(ret))
+		return ret;
+
+	ret = __copy_msghdr(&iomsg->msg, &msg, &iomsg->uaddr);
+	if (unlikely(ret))
+		return ret;
+
+	return io_recvmsg_mshot_prep(req, iomsg, msg.msg_namelen,
+					msg.msg_controllen);
 }
 
 int io_recvmsg_prep_async(struct io_kiocb *req)
-- 
2.43.0

[PATCH 6.7 119/713] io_uring/net: fix overflow check in io_recvmsg_mshot_prep()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 8ede3db5061bb1fe28e2c9683329aafa89d2b1b4 ]

The "controllen" variable is type size_t (unsigned long).  Casting it
to int could lead to an integer underflow.

The check_add_overflow() function considers the type of the destination
which is type int.  If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.

However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.

Good: 100 + (unsigned long)-4 = 96  <-- overflow
 Bad: 100 + (int)-4 = 96 <-- no overflow

I deleted the cast of the sizeof() as well.  That's not a bug but the
cast is unnecessary.

Fixes: 9b0fc3c054ff ("io_uring: fix types in io_recvmsg_multishot_overflow")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/net.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/io_uring/net.c b/io_uring/net.c
index 1d9bfde71809a..058e04ea68c04 100644
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -544,10 +544,10 @@ static int io_recvmsg_mshot_prep(struct io_kiocb *req,
 
 		if (unlikely(namelen < 0))
 			return -EOVERFLOW;
-		if (check_add_overflow((int)sizeof(struct io_uring_recvmsg_out),
+		if (check_add_overflow(sizeof(struct io_uring_recvmsg_out),
 					namelen, &hdr))
 			return -EOVERFLOW;
-		if (check_add_overflow(hdr, (int)controllen, &hdr))
+		if (check_add_overflow(hdr, controllen, &hdr))
 			return -EOVERFLOW;
 
 		iomsg->namelen = namelen;
-- 
2.43.0

[PATCH 6.7 120/713] aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

[Sasha Levin]

From: Chun-Yi Lee <jlee@suse.com>

[ Upstream commit f98364e926626c678fb4b9004b75cacf92ff0662 ]

This patch is against CVE-2023-6270. The description of cve is:

  A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
  kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
  `struct net_device`, and a use-after-free can be triggered by racing
  between the free on the struct and the access through the `skbtxq`
  global queue. This could lead to a denial of service condition or
  potential code execution.

In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.

This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd93 ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/aoe/aoecmd.c | 12 ++++++------
 drivers/block/aoe/aoenet.c |  1 +
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index d7317425be510..cc9077b588d7e 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -419,13 +419,16 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 	rcu_read_lock();
 	for_each_netdev_rcu(&init_net, ifp) {
 		dev_hold(ifp);
-		if (!is_aoe_netif(ifp))
-			goto cont;
+		if (!is_aoe_netif(ifp)) {
+			dev_put(ifp);
+			continue;
+		}
 
 		skb = new_skb(sizeof *h + sizeof *ch);
 		if (skb == NULL) {
 			printk(KERN_INFO "aoe: skb alloc failure\n");
-			goto cont;
+			dev_put(ifp);
+			continue;
 		}
 		skb_put(skb, sizeof *h + sizeof *ch);
 		skb->dev = ifp;
@@ -440,9 +443,6 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 		h->major = cpu_to_be16(aoemajor);
 		h->minor = aoeminor;
 		h->cmd = AOECMD_CFG;
-
-cont:
-		dev_put(ifp);
 	}
 	rcu_read_unlock();
 }
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index c51ea95bc2ce4..923a134fd7665 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -63,6 +63,7 @@ tx(int id) __must_hold(&txlock)
 			pr_warn("aoe: packet could not be sent on %s.  %s\n",
 				ifp ? ifp->name : "netif",
 				"consider increasing tx_queue_len");
+		dev_put(ifp);
 		spin_lock_irq(&txlock);
 	}
 	return 0;
-- 
2.43.0

[PATCH 6.7 121/713] x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type

[Sasha Levin]

From: Michael Roth <michael.roth@amd.com>

[ Upstream commit 8e5647a723c49d73b9f108a8bb38e8c29d3948ea ]

On 64-bit platforms, the pfn_to_kaddr() macro requires that the input
value is 64 bits in order to ensure that valid address bits don't get
lost when shifting that input by PAGE_SHIFT to calculate the physical
address to provide a virtual address for.

One such example is in pvalidate_pages() (used by SEV-SNP guests), where
the GFN in the struct used for page-state change requests is a 40-bit
bit-field, so attempts to pass this GFN field directly into
pfn_to_kaddr() ends up causing guest crashes when dealing with addresses
above the 1TB range due to the above.

Fix this issue with SEV-SNP guests, as well as any similar cases that
might cause issues in current/future code, by using an inline function,
instead of a macro, so that the input is implicitly cast to the
expected 64-bit input type prior to performing the shift operation.

While it might be argued that the issue is on the caller side, other
archs/macros have taken similar approaches to deal with instances like
this, such as ARM explicitly casting the input to phys_addr_t:

  e48866647b48 ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()")

A C inline function is even better though.

[ mingo: Refined the changelog some more & added __always_inline. ]

Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231122163700.400507-1-michael.roth@amd.com
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/page.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index d18e5c332cb9f..1b93ff80b43bc 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -66,10 +66,14 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
  * virt_addr_valid(kaddr) returns true.
  */
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
 extern bool __virt_addr_valid(unsigned long kaddr);
 #define virt_addr_valid(kaddr)	__virt_addr_valid((unsigned long) (kaddr))
 
+static __always_inline void *pfn_to_kaddr(unsigned long pfn)
+{
+	return __va(pfn << PAGE_SHIFT);
+}
+
 static __always_inline u64 __canonical_address(u64 vaddr, u8 vaddr_bits)
 {
 	return ((s64)vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits);
-- 
2.43.0

[PATCH 6.7 122/713] x86/resctrl: Remove hard-coded memory bandwidth limit

[Sasha Levin]

From: Babu Moger <babu.moger@amd.com>

[ Upstream commit 0976783bb123f30981bc1e7a14d9626a6f63aeac ]

The QOS Memory Bandwidth Enforcement Limit is reported by
CPUID_Fn80000020_EAX_x01 and CPUID_Fn80000020_EAX_x02:

  Bits	 Description
  31:0	 BW_LEN: Size of the QOS Memory Bandwidth Enforcement Limit.

Newer processors can support higher bandwidth limit than the current
hard-coded value. Remove latter and detect using CPUID instead. Also,
update the register variables eax and edx to match the AMD CPUID
definition.

The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag below.

Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/c26a8ca79d399ed076cf8bf2e9fbc58048808289.1705359148.git.babu.moger@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/resctrl/core.c     | 10 ++++------
 arch/x86/kernel/cpu/resctrl/internal.h |  1 -
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 19e0681f04356..d04371e851b4c 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -231,9 +231,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
 static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
-	union cpuid_0x10_3_eax eax;
-	union cpuid_0x10_x_edx edx;
-	u32 ebx, ecx, subleaf;
+	u32 eax, ebx, ecx, edx, subleaf;
 
 	/*
 	 * Query CPUID_Fn80000020_EDX_x01 for MBA and
@@ -241,9 +239,9 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 	 */
 	subleaf = (r->rid == RDT_RESOURCE_SMBA) ? 2 :  1;
 
-	cpuid_count(0x80000020, subleaf, &eax.full, &ebx, &ecx, &edx.full);
-	hw_res->num_closid = edx.split.cos_max + 1;
-	r->default_ctrl = MAX_MBA_BW_AMD;
+	cpuid_count(0x80000020, subleaf, &eax, &ebx, &ecx, &edx);
+	hw_res->num_closid = edx + 1;
+	r->default_ctrl = 1 << eax;
 
 	/* AMD does not use delay */
 	r->membw.delay_linear = false;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index a4f1aa15f0a2a..d2979748fae47 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -18,7 +18,6 @@
 #define MBM_OVERFLOW_INTERVAL		1000
 #define MAX_MBA_BW			100u
 #define MBA_IS_LINEAR			0x4
-#define MAX_MBA_BW_AMD			0x800
 #define MBM_CNTR_WIDTH_OFFSET_AMD	20
 
 #define RMID_VAL_ERROR			BIT_ULL(63)
-- 
2.43.0

[PATCH 6.7 123/713] x86/resctrl: Read supported bandwidth sources from CPUID

[Sasha Levin]

From: Babu Moger <babu.moger@amd.com>

[ Upstream commit 54e35eb8611cce5550d3d7689679b1a91c864f28 ]

If the BMEC (Bandwidth Monitoring Event Configuration) feature is
supported, the bandwidth events can be configured. The maximum supported
bandwidth bitmask can be read from CPUID:

  CPUID_Fn80000020_ECX_x03 [Platform QoS Monitoring Bandwidth Event Configuration]
  Bits    Description
  31:7    Reserved
   6:0    Identifies the bandwidth sources that can be tracked.

While at it, move the mask checking to mon_config_write() before
iterating over all the domains. Also, print the valid bitmask when the
user tries to configure invalid event configuration value.

The CPUID details are documented in the Processor Programming Reference
(PPR) Vol 1.1 for AMD Family 19h Model 11h B1 - 55901 Rev 0.25 in the
Link tag.

Fixes: dc2a3e857981 ("x86/resctrl: Add interface to read mbm_total_bytes_config")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/669896fa512c7451319fa5ca2fdb6f7e015b5635.1705359148.git.babu.moger@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/resctrl/internal.h |  3 +++
 arch/x86/kernel/cpu/resctrl/monitor.c  |  6 ++++++
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 14 ++++++++------
 3 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index d2979748fae47..e3dc35a00a197 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -394,6 +394,8 @@ struct rdt_parse_data {
  * @msr_update:		Function pointer to update QOS MSRs
  * @mon_scale:		cqm counter * mon_scale = occupancy in bytes
  * @mbm_width:		Monitor width, to detect and correct for overflow.
+ * @mbm_cfg_mask:	Bandwidth sources that can be tracked when Bandwidth
+ *			Monitoring Event Configuration (BMEC) is supported.
  * @cdp_enabled:	CDP state of this resource
  *
  * Members of this structure are either private to the architecture
@@ -408,6 +410,7 @@ struct rdt_hw_resource {
 				 struct rdt_resource *r);
 	unsigned int		mon_scale;
 	unsigned int		mbm_width;
+	unsigned int		mbm_cfg_mask;
 	bool			cdp_enabled;
 };
 
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index f136ac046851c..acca577e2b066 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -813,6 +813,12 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
 		return ret;
 
 	if (rdt_cpu_has(X86_FEATURE_BMEC)) {
+		u32 eax, ebx, ecx, edx;
+
+		/* Detect list of bandwidth sources that can be tracked */
+		cpuid_count(0x80000020, 3, &eax, &ebx, &ecx, &edx);
+		hw_res->mbm_cfg_mask = ecx & MAX_EVT_CONFIG_BITS;
+
 		if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL)) {
 			mbm_total_event.configurable = true;
 			mbm_config_rftype_init("mbm_total_bytes_config");
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 69a1de92384ab..2b69e560b05f1 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1620,12 +1620,6 @@ static int mbm_config_write_domain(struct rdt_resource *r,
 	struct mon_config_info mon_info = {0};
 	int ret = 0;
 
-	/* mon_config cannot be more than the supported set of events */
-	if (val > MAX_EVT_CONFIG_BITS) {
-		rdt_last_cmd_puts("Invalid event configuration\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * Read the current config value first. If both are the same then
 	 * no need to write it again.
@@ -1663,6 +1657,7 @@ static int mbm_config_write_domain(struct rdt_resource *r,
 
 static int mon_config_write(struct rdt_resource *r, char *tok, u32 evtid)
 {
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	char *dom_str = NULL, *id_str;
 	unsigned long dom_id, val;
 	struct rdt_domain *d;
@@ -1686,6 +1681,13 @@ static int mon_config_write(struct rdt_resource *r, char *tok, u32 evtid)
 		return -EINVAL;
 	}
 
+	/* Value from user cannot be more than the supported set of events */
+	if ((val & hw_res->mbm_cfg_mask) != val) {
+		rdt_last_cmd_printf("Invalid event configuration: max valid mask is 0x%02x\n",
+				    hw_res->mbm_cfg_mask);
+		return -EINVAL;
+	}
+
 	list_for_each_entry(d, &r->domains, list) {
 		if (d->id == dom_id) {
 			ret = mbm_config_write_domain(r, d, evtid, val);
-- 
2.43.0

[PATCH 6.7 124/713] x86/resctrl: Implement new mba_MBps throttling heuristic

[Sasha Levin]

From: Tony Luck <tony.luck@intel.com>

[ Upstream commit c2427e70c1630d98966375fffc2b713ab9768a94 ]

The mba_MBps feedback loop increases throttling when a group is using
more bandwidth than the target set by the user in the schemata file, and
decreases throttling when below target.

To avoid possibly stepping throttling up and down on every poll a flag
"delta_comp" is set whenever throttling is changed to indicate that the
actual change in bandwidth should be recorded on the next poll in
"delta_bw". Throttling is only reduced if the current bandwidth plus
delta_bw is below the user target.

This algorithm works well if the workload has steady bandwidth needs.
But it can go badly wrong if the workload moves to a different phase
just as the throttling level changed. E.g. if the workload becomes
essentially idle right as throttling level is increased, the value
calculated for delta_bw will be more or less the old bandwidth level.
If the workload then resumes, Linux may never reduce throttling because
current bandwidth plus delta_bw is above the target set by the user.

Implement a simpler heuristic by assuming that in the worst case the
currently measured bandwidth is being controlled by the current level of
throttling. Compute how much it may increase if throttling is relaxed to
the next higher level. If that is still below the user target, then it
is ok to reduce the amount of throttling.

Fixes: ba0f26d8529c ("x86/intel_rdt/mba_sc: Prepare for feedback loop")
Reported-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xiaochen Shen <xiaochen.shen@intel.com>
Link: https://lore.kernel.org/r/20240122180807.70518-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/resctrl/internal.h |  4 ---
 arch/x86/kernel/cpu/resctrl/monitor.c  | 42 ++++++--------------------
 2 files changed, 10 insertions(+), 36 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index e3dc35a00a197..52e7e7deee106 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -295,14 +295,10 @@ struct rftype {
  * struct mbm_state - status for each MBM counter in each domain
  * @prev_bw_bytes: Previous bytes value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
- * @delta_bw:	Difference between the current and previous bandwidth
- * @delta_comp:	Indicates whether to compute the delta_bw
  */
 struct mbm_state {
 	u64	prev_bw_bytes;
 	u32	prev_bw;
-	u32	delta_bw;
-	bool	delta_comp;
 };
 
 /**
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index acca577e2b066..3a6c069614eb8 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -440,9 +440,6 @@ static void mbm_bw_count(u32 rmid, struct rmid_read *rr)
 
 	cur_bw = bytes / SZ_1M;
 
-	if (m->delta_comp)
-		m->delta_bw = abs(cur_bw - m->prev_bw);
-	m->delta_comp = false;
 	m->prev_bw = cur_bw;
 }
 
@@ -520,11 +517,11 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 {
 	u32 closid, rmid, cur_msr_val, new_msr_val;
 	struct mbm_state *pmbm_data, *cmbm_data;
-	u32 cur_bw, delta_bw, user_bw;
 	struct rdt_resource *r_mba;
 	struct rdt_domain *dom_mba;
 	struct list_head *head;
 	struct rdtgroup *entry;
+	u32 cur_bw, user_bw;
 
 	if (!is_mbm_local_enabled())
 		return;
@@ -543,7 +540,6 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 
 	cur_bw = pmbm_data->prev_bw;
 	user_bw = dom_mba->mbps_val[closid];
-	delta_bw = pmbm_data->delta_bw;
 
 	/* MBA resource doesn't support CDP */
 	cur_msr_val = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
@@ -555,49 +551,31 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 	list_for_each_entry(entry, head, mon.crdtgrp_list) {
 		cmbm_data = &dom_mbm->mbm_local[entry->mon.rmid];
 		cur_bw += cmbm_data->prev_bw;
-		delta_bw += cmbm_data->delta_bw;
 	}
 
 	/*
 	 * Scale up/down the bandwidth linearly for the ctrl group.  The
 	 * bandwidth step is the bandwidth granularity specified by the
 	 * hardware.
-	 *
-	 * The delta_bw is used when increasing the bandwidth so that we
-	 * dont alternately increase and decrease the control values
-	 * continuously.
-	 *
-	 * For ex: consider cur_bw = 90MBps, user_bw = 100MBps and if
-	 * bandwidth step is 20MBps(> user_bw - cur_bw), we would keep
-	 * switching between 90 and 110 continuously if we only check
-	 * cur_bw < user_bw.
+	 * Always increase throttling if current bandwidth is above the
+	 * target set by user.
+	 * But avoid thrashing up and down on every poll by checking
+	 * whether a decrease in throttling is likely to push the group
+	 * back over target. E.g. if currently throttling to 30% of bandwidth
+	 * on a system with 10% granularity steps, check whether moving to
+	 * 40% would go past the limit by multiplying current bandwidth by
+	 * "(30 + 10) / 30".
 	 */
 	if (cur_msr_val > r_mba->membw.min_bw && user_bw < cur_bw) {
 		new_msr_val = cur_msr_val - r_mba->membw.bw_gran;
 	} else if (cur_msr_val < MAX_MBA_BW &&
-		   (user_bw > (cur_bw + delta_bw))) {
+		   (user_bw > (cur_bw * (cur_msr_val + r_mba->membw.min_bw) / cur_msr_val))) {
 		new_msr_val = cur_msr_val + r_mba->membw.bw_gran;
 	} else {
 		return;
 	}
 
 	resctrl_arch_update_one(r_mba, dom_mba, closid, CDP_NONE, new_msr_val);
-
-	/*
-	 * Delta values are updated dynamically package wise for each
-	 * rdtgrp every time the throttle MSR changes value.
-	 *
-	 * This is because (1)the increase in bandwidth is not perfectly
-	 * linear and only "approximately" linear even when the hardware
-	 * says it is linear.(2)Also since MBA is a core specific
-	 * mechanism, the delta values vary based on number of cores used
-	 * by the rdtgrp.
-	 */
-	pmbm_data->delta_comp = true;
-	list_for_each_entry(entry, head, mon.crdtgrp_list) {
-		cmbm_data = &dom_mbm->mbm_local[entry->mon.rmid];
-		cmbm_data->delta_comp = true;
-	}
 }
 
 static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
-- 
2.43.0

[PATCH 6.7 125/713] x86/sme: Fix memory encryption setting if enabled by default and not overridden

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit e814b59e6c2b11f5a3d007b2e61f7d550c354c3a ]

Commit

  cbebd68f59f0 ("x86/mm: Fix use of uninitialized buffer in sme_enable()")

'fixed' an issue in sme_enable() detected by static analysis, and broke
the common case in the process.

cmdline_find_option() will return < 0 on an error, or when the command
line argument does not appear at all. In this particular case, the
latter is not an error condition, and so the early exit is wrong.

Instead, without mem_encrypt= on the command line, the compile time
default should be honoured, which could be to enable memory encryption,
and this is currently broken.

Fix it by setting sme_me_mask to a preliminary value based on the
compile time default, and only omitting the command line argument test
when cmdline_find_option() returns an error.

  [ bp: Drop active_by_default while at it. ]

Fixes: cbebd68f59f0 ("x86/mm: Fix use of uninitialized buffer in sme_enable()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240126163918.2908990-2-ardb+git@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/mem_encrypt_identity.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c
index d73aeb16417fc..7f72472a34d6d 100644
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -507,7 +507,6 @@ void __init sme_enable(struct boot_params *bp)
 	const char *cmdline_ptr, *cmdline_arg, *cmdline_on, *cmdline_off;
 	unsigned int eax, ebx, ecx, edx;
 	unsigned long feature_mask;
-	bool active_by_default;
 	unsigned long me_mask;
 	char buffer[16];
 	bool snp;
@@ -593,22 +592,19 @@ void __init sme_enable(struct boot_params *bp)
 	     : "p" (sme_cmdline_off));
 
 	if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT))
-		active_by_default = true;
-	else
-		active_by_default = false;
+		sme_me_mask = me_mask;
 
 	cmdline_ptr = (const char *)((u64)bp->hdr.cmd_line_ptr |
 				     ((u64)bp->ext_cmd_line_ptr << 32));
 
 	if (cmdline_find_option(cmdline_ptr, cmdline_arg, buffer, sizeof(buffer)) < 0)
-		return;
+		goto out;
 
 	if (!strncmp(buffer, cmdline_on, sizeof(buffer)))
 		sme_me_mask = me_mask;
 	else if (!strncmp(buffer, cmdline_off, sizeof(buffer)))
 		sme_me_mask = 0;
-	else
-		sme_me_mask = active_by_default ? me_mask : 0;
+
 out:
 	if (sme_me_mask) {
 		physical_mask &= ~sme_me_mask;
-- 
2.43.0

[PATCH 6.7 126/713] timekeeping: Fix cross-timestamp interpolation on counter wrap

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 84dccadd3e2a3f1a373826ad71e5ced5e76b0c00 ]

cycle_between() decides whether get_device_system_crosststamp() will
interpolate for older counter readings.

cycle_between() yields wrong results for a counter wrap-around where after
< before < test, and for the case after < test < before.

Fix the comparison logic.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-2-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 266d02809dbb1..8f35455b62509 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1186,7 +1186,7 @@ static bool cycle_between(u64 before, u64 test, u64 after)
 {
 	if (test > before && test < after)
 		return true;
-	if (test < before && before > after)
+	if (before > after && (test > before || test < after))
 		return true;
 	return false;
 }
-- 
2.43.0

[PATCH 6.7 127/713] timekeeping: Fix cross-timestamp interpolation corner case decision

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 87a41130881995f82f7adbafbfeddaebfb35f0ef ]

The cycle_between() helper checks if parameter test is in the open interval
(before, after). Colloquially speaking, this also applies to the counter
wrap-around special case before > after. get_device_system_crosststamp()
currently uses cycle_between() at the first call site to decide whether to
interpolate for older counter readings.

get_device_system_crosststamp() has the following problem with
cycle_between() testing against an open interval: Assume that, by chance,
cycles == tk->tkr_mono.cycle_last (in the following, "cycle_last" for
brevity). Then, cycle_between() at the first call site, with effective
argument values cycle_between(cycle_last, cycles, now), returns false,
enabling interpolation. During interpolation,
get_device_system_crosststamp() will then call cycle_between() at the
second call site (if a history_begin was supplied). The effective argument
values are cycle_between(history_begin->cycles, cycles, cycles), since
system_counterval.cycles == interval_start == cycles, per the assumption.
Due to the test against the open interval, cycle_between() returns false
again. This causes get_device_system_crosststamp() to return -EINVAL.

This failure should be avoided, since get_device_system_crosststamp() works
both when cycles follows cycle_last (no interpolation), and when cycles
precedes cycle_last (interpolation). For the case cycles == cycle_last,
interpolation is actually unneeded.

Fix this by changing cycle_between() into timestamp_in_interval(), which
now checks against the closed interval, rather than the open interval.

This changes the get_device_system_crosststamp() behavior for three corner
cases:

1. Bypass interpolation in the case cycles == tk->tkr_mono.cycle_last,
   fixing the problem described above.

2. At the first timestamp_in_interval() call site, cycles == now no longer
   causes failure.

3. At the second timestamp_in_interval() call site, history_begin->cycles
   == system_counterval.cycles no longer causes failure.
   adjust_historical_crosststamp() also works for this corner case,
   where partial_history_cycles == total_history_cycles.

These behavioral changes should not cause any problems.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231218073849.35294-3-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8f35455b62509..4e9f2f88c9d6e 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1180,13 +1180,15 @@ static int adjust_historical_crosststamp(struct system_time_snapshot *history,
 }
 
 /*
- * cycle_between - true if test occurs chronologically between before and after
+ * timestamp_in_interval - true if ts is chronologically in [start, end]
+ *
+ * True if ts occurs chronologically at or after start, and before or at end.
  */
-static bool cycle_between(u64 before, u64 test, u64 after)
+static bool timestamp_in_interval(u64 start, u64 end, u64 ts)
 {
-	if (test > before && test < after)
+	if (ts >= start && ts <= end)
 		return true;
-	if (before > after && (test > before || test < after))
+	if (start > end && (ts >= start || ts <= end))
 		return true;
 	return false;
 }
@@ -1246,7 +1248,7 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		 */
 		now = tk_clock_read(&tk->tkr_mono);
 		interval_start = tk->tkr_mono.cycle_last;
-		if (!cycle_between(interval_start, cycles, now)) {
+		if (!timestamp_in_interval(interval_start, now, cycles)) {
 			clock_was_set_seq = tk->clock_was_set_seq;
 			cs_was_changed_seq = tk->cs_was_changed_seq;
 			cycles = interval_start;
@@ -1277,13 +1279,13 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		bool discontinuity;
 
 		/*
-		 * Check that the counter value occurs after the provided
+		 * Check that the counter value is not before the provided
 		 * history reference and that the history doesn't cross a
 		 * clocksource change
 		 */
 		if (!history_begin ||
-		    !cycle_between(history_begin->cycles,
-				   system_counterval.cycles, cycles) ||
+		    !timestamp_in_interval(history_begin->cycles,
+					   cycles, system_counterval.cycles) ||
 		    history_begin->cs_was_changed_seq != cs_was_changed_seq)
 			return -EINVAL;
 		partial_history_cycles = cycles - system_counterval.cycles;
-- 
2.43.0

[PATCH 6.7 128/713] timekeeping: Fix cross-timestamp interpolation for non-x86

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 14274d0bd31b4debf28284604589f596ad2e99f2 ]

So far, get_device_system_crosststamp() unconditionally passes
system_counterval.cycles to timekeeping_cycles_to_ns(). But when
interpolating system time (do_interp == true), system_counterval.cycles is
before tkr_mono.cycle_last, contrary to the timekeeping_cycles_to_ns()
expectations.

On x86, CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE will mitigate on
interpolating, setting delta to 0. With delta == 0, xtstamp->sys_monoraw
and xtstamp->sys_realtime are then set to the last update time, as
implicitly expected by adjust_historical_crosststamp(). On other
architectures, the resulting nonsense xtstamp->sys_monoraw and
xtstamp->sys_realtime corrupt the xtstamp (ts) adjustment in
adjust_historical_crosststamp().

Fix this by deriving xtstamp->sys_monoraw and xtstamp->sys_realtime from
the last update time when interpolating, by using the local variable
"cycles". The local variable already has the right value when
interpolating, unlike system_counterval.cycles.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-4-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 4e9f2f88c9d6e..8aab7ed414907 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1261,10 +1261,8 @@ int get_device_system_crosststamp(int (*get_time_fn)
 				      tk_core.timekeeper.offs_real);
 		base_raw = tk->tkr_raw.base;
 
-		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono,
-						     system_counterval.cycles);
-		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw,
-						    system_counterval.cycles);
+		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, cycles);
+		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, cycles);
 	} while (read_seqcount_retry(&tk_core.seq, seq));
 
 	xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real);
-- 
2.43.0

[PATCH 6.7 129/713] sched/fair: Take the scheduling domain into account in select_idle_smt()

[Sasha Levin]

From: Keisuke Nishimura <keisuke.nishimura@inria.fr>

[ Upstream commit 8aeaffef8c6eceab0e1498486fdd4f3dc3b7066c ]

When picking a CPU on task wakeup, select_idle_smt() has to take
into account the scheduling domain of @target. This is because the
"isolcpus" kernel command line option can remove CPUs from the domain to
isolate them from other SMT siblings.

This fix checks if the candidate CPU is in the target scheduling domain.

Commit:

  df3cb4ea1fb6 ("sched/fair: Fix wrong cpu selecting from isolated domain")

... originally introduced this fix by adding the check of the scheduling
domain in the loop.

However, commit:

  3e6efe87cd5cc ("sched/fair: Remove redundant check in select_idle_smt()")

... accidentally removed the check. Bring it back.

Fixes: 3e6efe87cd5c ("sched/fair: Remove redundant check in select_idle_smt()")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240110131707.437301-1-keisuke.nishimura@inria.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 7ac9f4b1d955c..68bd1102133ef 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7318,13 +7318,19 @@ static int select_idle_core(struct task_struct *p, int core, struct cpumask *cpu
 /*
  * Scan the local SMT mask for idle CPUs.
  */
-static int select_idle_smt(struct task_struct *p, int target)
+static int select_idle_smt(struct task_struct *p, struct sched_domain *sd, int target)
 {
 	int cpu;
 
 	for_each_cpu_and(cpu, cpu_smt_mask(target), p->cpus_ptr) {
 		if (cpu == target)
 			continue;
+		/*
+		 * Check if the CPU is in the LLC scheduling domain of @target.
+		 * Due to isolcpus, there is no guarantee that all the siblings are in the domain.
+		 */
+		if (!cpumask_test_cpu(cpu, sched_domain_span(sd)))
+			continue;
 		if (available_idle_cpu(cpu) || sched_idle_cpu(cpu))
 			return cpu;
 	}
@@ -7348,7 +7354,7 @@ static inline int select_idle_core(struct task_struct *p, int core, struct cpuma
 	return __select_idle_cpu(core, p);
 }
 
-static inline int select_idle_smt(struct task_struct *p, int target)
+static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd, int target)
 {
 	return -1;
 }
@@ -7598,7 +7604,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
 		has_idle_core = test_idle_cores(target);
 
 		if (!has_idle_core && cpus_share_cache(prev, target)) {
-			i = select_idle_smt(p, prev);
+			i = select_idle_smt(p, sd, prev);
 			if ((unsigned int)i < nr_cpumask_bits)
 				return i;
 		}
-- 
2.43.0

[PATCH 6.7 130/713] sched/fair: Take the scheduling domain into account in select_idle_core()

[Sasha Levin]

From: Keisuke Nishimura <keisuke.nishimura@inria.fr>

[ Upstream commit 23d04d8c6b8ec339057264659b7834027f3e6a63 ]

When picking a CPU on task wakeup, select_idle_core() has to take
into account the scheduling domain where the function looks for the CPU.

This is because the "isolcpus" kernel command line option can remove CPUs
from the domain to isolate them from other SMT siblings.

This change replaces the set of CPUs allowed to run the task from
p->cpus_ptr by the intersection of p->cpus_ptr and sched_domain_span(sd)
which is stored in the 'cpus' argument provided by select_idle_cpu().

Fixes: 9fe1f127b913 ("sched/fair: Merge select_idle_core/cpu()")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240110131707.437301-2-keisuke.nishimura@inria.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 68bd1102133ef..c43b71792a8e5 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7296,7 +7296,7 @@ static int select_idle_core(struct task_struct *p, int core, struct cpumask *cpu
 		if (!available_idle_cpu(cpu)) {
 			idle = false;
 			if (*idle_cpu == -1) {
-				if (sched_idle_cpu(cpu) && cpumask_test_cpu(cpu, p->cpus_ptr)) {
+				if (sched_idle_cpu(cpu) && cpumask_test_cpu(cpu, cpus)) {
 					*idle_cpu = cpu;
 					break;
 				}
@@ -7304,7 +7304,7 @@ static int select_idle_core(struct task_struct *p, int core, struct cpumask *cpu
 			}
 			break;
 		}
-		if (*idle_cpu == -1 && cpumask_test_cpu(cpu, p->cpus_ptr))
+		if (*idle_cpu == -1 && cpumask_test_cpu(cpu, cpus))
 			*idle_cpu = cpu;
 	}
 
-- 
2.43.0

[PATCH 6.7 131/713] wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

[Sasha Levin]

From: Xingyuan Mo <hdthky0@gmail.com>

[ Upstream commit ad25ee36f00172f7d53242dc77c69fff7ced0755 ]

We should check whether the WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT tlv is
present before accessing it, otherwise a null pointer deference error will
occur.

Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231208043433.271449-1-hdthky0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 6b6aa3c367448..0ce08e9a0a3d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -851,6 +851,10 @@ ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev(struct ath10k *ar, struct sk_buff *skb,
 	}
 
 	ev = tb[WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
 
 	arg->desc_id = ev->desc_id;
 	arg->status = ev->status;
-- 
2.43.0

[PATCH 6.7 132/713] wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 9636951e4468f02c72cc75a82dc65d003077edbc ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Log of issue before change (with kernel parameter qos=0):
    [  +5.112651] ------------[ cut here ]------------
    [  +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000044]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000055]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)]
    [  +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00
    [  +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097
    [  +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900
    [  +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0
    [  +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000
    [  +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40
    [  +0.000001] FS:  0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000
    [  +0.000001] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0
    [  +0.000002] Call Trace:
    [  +0.000003]  <TASK>
    [  +0.000001]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000044]  ? __warn+0x81/0x130
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000045]  ? report_bug+0x171/0x1a0
    [  +0.000004]  ? handle_bug+0x41/0x70
    [  +0.000004]  ? exc_invalid_op+0x17/0x70
    [  +0.000003]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000043]  ieee80211_wake_queue+0x4a/0x80 [mac80211]
    [  +0.000044]  b43_dma_handle_txstatus+0x29c/0x3a0 [b43]
    [  +0.000016]  ? __pfx_irq_thread_fn+0x10/0x10
    [  +0.000002]  b43_handle_txstatus+0x61/0x80 [b43]
    [  +0.000012]  b43_interrupt_thread_handler+0x3f9/0x6b0 [b43]
    [  +0.000011]  irq_thread_fn+0x23/0x60
    [  +0.000002]  irq_thread+0xfe/0x1c0
    [  +0.000002]  ? __pfx_irq_thread_dtor+0x10/0x10
    [  +0.000001]  ? __pfx_irq_thread+0x10/0x10
    [  +0.000001]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000002]  ret_from_fork_asm+0x1b/0x30
    [  +0.000004]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

    [  +0.000065] ------------[ cut here ]------------
    [  +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000073]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000084]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43]
    [  +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] Workqueue: phy7 b43_tx_work [b43]
    [  +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90
    [  +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097
    [  +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900
    [  +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
    [  +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900
    [  +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0
    [  +0.000002] FS:  0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000
    [  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0
    [  +0.000002] Call Trace:
    [  +0.000001]  <TASK>
    [  +0.000001]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? __warn+0x81/0x130
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? report_bug+0x171/0x1a0
    [  +0.000005]  ? handle_bug+0x41/0x70
    [  +0.000003]  ? exc_invalid_op+0x17/0x70
    [  +0.000004]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076]  ieee80211_stop_queue+0x36/0x50 [mac80211]
    [  +0.000077]  b43_dma_tx+0x550/0x780 [b43]
    [  +0.000023]  b43_tx_work+0x90/0x130 [b43]
    [  +0.000018]  process_one_work+0x174/0x340
    [  +0.000003]  worker_thread+0x27b/0x3a0
    [  +0.000004]  ? __pfx_worker_thread+0x10/0x10
    [  +0.000002]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000004]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork_asm+0x1b/0x30
    [  +0.000006]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/b43.h | 16 ++++++++++++++++
 drivers/net/wireless/broadcom/b43/dma.c |  4 ++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
index 67b4bac048e58..c0d8fc0b22fb2 100644
--- a/drivers/net/wireless/broadcom/b43/b43.h
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -1082,6 +1082,22 @@ static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 	return dev->__using_pio_transfers;
 }
 
+static inline void b43_wake_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_wake_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_wake_queue(dev->wl->hw, 0);
+}
+
+static inline void b43_stop_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_stop_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_stop_queue(dev->wl->hw, 0);
+}
+
 /* Message printing */
 __printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
 __printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c
index 760d1a28edc6c..6ac7dcebfff9d 100644
--- a/drivers/net/wireless/broadcom/b43/dma.c
+++ b/drivers/net/wireless/broadcom/b43/dma.c
@@ -1399,7 +1399,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	    should_inject_overflow(ring)) {
 		/* This TX ring is full. */
 		unsigned int skb_mapping = skb_get_queue_mapping(skb);
-		ieee80211_stop_queue(dev->wl->hw, skb_mapping);
+		b43_stop_queue(dev, skb_mapping);
 		dev->wl->tx_queue_stopped[skb_mapping] = true;
 		ring->stopped = true;
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
@@ -1570,7 +1570,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	} else {
 		/* If the driver queue is running wake the corresponding
 		 * mac80211 queue. */
-		ieee80211_wake_queue(dev->wl->hw, ring->queue_prio);
+		b43_wake_queue(dev, ring->queue_prio);
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
 			b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
 		}
-- 
2.43.0

[PATCH 6.7 133/713] wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 77135a38f6c2f950d2306ac3d37cbb407e6243f2 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Fixes: 5100d5ac81b9 ("b43: Add PIO support for PCMCIA devices")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/pio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/pio.c b/drivers/net/wireless/broadcom/b43/pio.c
index 0cf70fdb60a6a..e41f2f5b4c266 100644
--- a/drivers/net/wireless/broadcom/b43/pio.c
+++ b/drivers/net/wireless/broadcom/b43/pio.c
@@ -525,7 +525,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (total_len > (q->buffer_size - q->buffer_used)) {
 		/* Not enough memory on the queue. */
 		err = -EBUSY;
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 		goto out;
 	}
@@ -552,7 +552,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (((q->buffer_size - q->buffer_used) < roundup(2 + 2 + 6, 4)) ||
 	    (q->free_packet_slots == 0)) {
 		/* The queue is full. */
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 	}
 
@@ -587,7 +587,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 	list_add(&pack->list, &q->packets_list);
 
 	if (q->stopped) {
-		ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
+		b43_wake_queue(dev, q->queue_prio);
 		q->stopped = false;
 	}
 }
-- 
2.43.0

[PATCH 6.7 134/713] wifi: b43: Stop correct queue in DMA worker when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 581c8967d66c4961076dbbee356834e9c6777184 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop queue 0 when QoS is
disabled to prevent trying to stop a non-existent queue and failing to stop
the actual queue instantiated.

Fixes: bad691946966 ("b43: avoid packet losses in the dma worker code.")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-4-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 92ca0b2ca286d..97d8bdeaa06cb 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -3603,7 +3603,7 @@ static void b43_tx_work(struct work_struct *work)
 				err = b43_dma_tx(dev, skb);
 			if (err == -ENOSPC) {
 				wl->tx_queue_stopped[queue_num] = true;
-				ieee80211_stop_queue(wl->hw, queue_num);
+				b43_stop_queue(dev, queue_num);
 				skb_queue_head(&wl->tx_queue[queue_num], skb);
 				break;
 			}
@@ -3627,6 +3627,7 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 		      struct sk_buff *skb)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
+	u16 skb_queue_mapping;
 
 	if (unlikely(skb->len < 2 + 2 + 6)) {
 		/* Too short, this can't be a valid frame. */
@@ -3635,12 +3636,12 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 	}
 	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
 
-	skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
-	if (!wl->tx_queue_stopped[skb->queue_mapping]) {
+	skb_queue_mapping = skb_get_queue_mapping(skb);
+	skb_queue_tail(&wl->tx_queue[skb_queue_mapping], skb);
+	if (!wl->tx_queue_stopped[skb_queue_mapping])
 		ieee80211_queue_work(wl->hw, &wl->tx_work);
-	} else {
-		ieee80211_stop_queue(wl->hw, skb->queue_mapping);
-	}
+	else
+		b43_stop_queue(wl->current_dev, skb_queue_mapping);
 }
 
 static void b43_qos_params_upload(struct b43_wldev *dev,
-- 
2.43.0

[PATCH 6.7 135/713] wifi: b43: Disable QoS for bcm4331

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 09795bded2e725443fe4a4803cae2079cdaf7b26 ]

bcm4331 seems to not function correctly with QoS support. This may be due
to issues with currently available firmware or potentially a device
specific issue.

When queues that are not of the default "best effort" priority are
selected, traffic appears to not transmit out of the hardware while no
errors are returned. This behavior is present among all the other priority
queues: video, voice, and background. While this can be worked around by
setting a kernel parameter, the default behavior is problematic for most
users and may be difficult to debug. This patch offers a working out-of-box
experience for bcm4331 users.

Log of the issue (using ssh low-priority traffic as an example):
    ssh -T -vvvv git@github.com
    OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com
    debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"'
    debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1''
    debug3: command returned status 0
    debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"'
    debug2: match found
    debug1: /etc/ssh/ssh_config line 9: Applying options for *
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts'
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2'
    debug2: resolving "github.com" port 22
    debug3: resolve_host: lookup github.com:22
    debug3: channel_clear_timeouts: clearing
    debug3: ssh_connect_direct: entering
    debug1: Connecting to github.com [192.30.255.113] port 22.
    debug3: set_sock_tos: set socket 3 IP_TOS 0x48

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 97d8bdeaa06cb..effb6c23f8257 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2587,7 +2587,8 @@ static void b43_request_firmware(struct work_struct *work)
 
 start_ieee80211:
 	wl->hw->queues = B43_QOS_QUEUE_NUM;
-	if (!modparam_qos || dev->fw.opensource)
+	if (!modparam_qos || dev->fw.opensource ||
+	    dev->dev->chip_id == BCMA_CHIP_ID_BCM4331)
 		wl->hw->queues = 1;
 
 	err = ieee80211_register_hw(wl->hw);
-- 
2.43.0

[PATCH 6.7 136/713] wifi: wilc1000: fix declarations ordering

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit 535733e90e5d8912ebeccebb05b354a2d06ff459 ]

Reorder parameters declaration in wilc_parse_join_bss_param to enforce
reverse christmas tree

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105075733.36331-2-alexis.lothore@bootlin.com
Stable-dep-of: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/hif.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index a28da59384813..2f8b9e9c393ce 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -374,13 +374,13 @@ static void handle_connect_timeout(struct work_struct *work)
 void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 				struct cfg80211_crypto_settings *crypto)
 {
-	struct wilc_join_bss_param *param;
-	struct ieee80211_p2p_noa_attr noa_attr;
-	u8 rates_len = 0;
+	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
 	const u8 *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
 	const u8 *ht_ie, *wpa_ie, *wmm_ie, *rsn_ie;
+	struct ieee80211_p2p_noa_attr noa_attr;
+	struct wilc_join_bss_param *param;
+	u8 rates_len = 0;
 	int ret;
-	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param)
-- 
2.43.0

[PATCH 6.7 137/713] wifi: wilc1000: fix RCU usage in connect path

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit 205c50306acf58a335eb19fa84e40140f4fe814f ]

With lockdep enabled, calls to the connect function from cfg802.11 layer
lead to the following warning:

=============================
WARNING: suspicious RCU usage
6.7.0-rc1-wt+ #333 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:386
suspicious rcu_dereference_check() usage!
[...]
stack backtrace:
CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333
Hardware name: Atmel SAMA5
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x34/0x48
 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4
 wilc_parse_join_bss_param from connect+0x2c4/0x648
 connect from cfg80211_connect+0x30c/0xb74
 cfg80211_connect from nl80211_connect+0x860/0xa94
 nl80211_connect from genl_rcv_msg+0x3fc/0x59c
 genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8
 netlink_rcv_skb from genl_rcv+0x2c/0x3c
 genl_rcv from netlink_unicast+0x3b0/0x550
 netlink_unicast from netlink_sendmsg+0x368/0x688
 netlink_sendmsg from ____sys_sendmsg+0x190/0x430
 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158
 ___sys_sendmsg from sys_sendmsg+0xe8/0x150
 sys_sendmsg from ret_fast_syscall+0x0/0x1c

This warning is emitted because in the connect path, when trying to parse
target BSS parameters, we dereference a RCU pointer whithout being in RCU
critical section.
Fix RCU dereference usage by moving it to a RCU read critical section. To
avoid wrapping the whole wilc_parse_join_bss_param under the critical
section, just use the critical section to copy ies data

Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/hif.c | 36 ++++++++++++-------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index 2f8b9e9c393ce..e202013e6f2fe 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -374,38 +374,49 @@ static void handle_connect_timeout(struct work_struct *work)
 void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 				struct cfg80211_crypto_settings *crypto)
 {
-	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
-	const u8 *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
+	const u8 *ies_data, *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
 	const u8 *ht_ie, *wpa_ie, *wmm_ie, *rsn_ie;
 	struct ieee80211_p2p_noa_attr noa_attr;
+	const struct cfg80211_bss_ies *ies;
 	struct wilc_join_bss_param *param;
-	u8 rates_len = 0;
+	u8 rates_len = 0, ies_len;
 	int ret;
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param)
 		return NULL;
 
+	rcu_read_lock();
+	ies = rcu_dereference(bss->ies);
+	ies_data = kmemdup(ies->data, ies->len, GFP_ATOMIC);
+	if (!ies_data) {
+		rcu_read_unlock();
+		kfree(param);
+		return NULL;
+	}
+	ies_len = ies->len;
+	rcu_read_unlock();
+
 	param->beacon_period = cpu_to_le16(bss->beacon_interval);
 	param->cap_info = cpu_to_le16(bss->capability);
 	param->bss_type = WILC_FW_BSS_TYPE_INFRA;
 	param->ch = ieee80211_frequency_to_channel(bss->channel->center_freq);
 	ether_addr_copy(param->bssid, bss->bssid);
 
-	ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
+	ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies_data, ies_len);
 	if (ssid_elm) {
 		if (ssid_elm[1] <= IEEE80211_MAX_SSID_LEN)
 			memcpy(param->ssid, ssid_elm + 2, ssid_elm[1]);
 	}
 
-	tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
+	tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies_data, ies_len);
 	if (tim_elm && tim_elm[1] >= 2)
 		param->dtim_period = tim_elm[3];
 
 	memset(param->p_suites, 0xFF, 3);
 	memset(param->akm_suites, 0xFF, 3);
 
-	rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies->data, ies->len);
+	rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies_data, ies_len);
 	if (rates_ie) {
 		rates_len = rates_ie[1];
 		if (rates_len > WILC_MAX_RATES_SUPPORTED)
@@ -416,7 +427,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 
 	if (rates_len < WILC_MAX_RATES_SUPPORTED) {
 		supp_rates_ie = cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES,
-						 ies->data, ies->len);
+						 ies_data, ies_len);
 		if (supp_rates_ie) {
 			u8 ext_rates = supp_rates_ie[1];
 
@@ -431,11 +442,11 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 		}
 	}
 
-	ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies->data, ies->len);
+	ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies_data, ies_len);
 	if (ht_ie)
 		param->ht_capable = true;
 
-	ret = cfg80211_get_p2p_attr(ies->data, ies->len,
+	ret = cfg80211_get_p2p_attr(ies_data, ies_len,
 				    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
 				    (u8 *)&noa_attr, sizeof(noa_attr));
 	if (ret > 0) {
@@ -459,7 +470,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 	}
 	wmm_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 					 WLAN_OUI_TYPE_MICROSOFT_WMM,
-					 ies->data, ies->len);
+					 ies_data, ies_len);
 	if (wmm_ie) {
 		struct ieee80211_wmm_param_ie *ie;
 
@@ -474,13 +485,13 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 
 	wpa_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 					 WLAN_OUI_TYPE_MICROSOFT_WPA,
-					 ies->data, ies->len);
+					 ies_data, ies_len);
 	if (wpa_ie) {
 		param->mode_802_11i = 1;
 		param->rsn_found = true;
 	}
 
-	rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies->data, ies->len);
+	rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies_data, ies_len);
 	if (rsn_ie) {
 		int rsn_ie_len = sizeof(struct element) + rsn_ie[1];
 		int offset = 8;
@@ -514,6 +525,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 			param->akm_suites[i] = crypto->akm_suites[i] & 0xFF;
 	}
 
+	kfree(ies_data);
 	return (void *)param;
 }
 
-- 
2.43.0

[PATCH 6.7 138/713] wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work

[Sasha Levin]

From: Martin Kaistra <martin.kaistra@linutronix.de>

[ Upstream commit 1213acb478a7181cd73eeaf00db430f1e45b1361 ]

The workqueue might still be running, when the driver is stopped. To
avoid a use-after-free, call cancel_work_sync() in rtl8xxxu_stop().

Fixes: e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240111163628.320697-2-martin.kaistra@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 180907319e8cd..04df0f54aa667 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -7304,6 +7304,7 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw)
 	if (priv->usb_interrupts)
 		rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
 
+	cancel_work_sync(&priv->c2hcmd_work);
 	cancel_delayed_work_sync(&priv->ra_watchdog);
 
 	rtl8xxxu_free_rx_resources(priv);
-- 
2.43.0

[PATCH 6.7 139/713] wifi: wilc1000: do not realloc workqueue everytime an interface is added

[Sasha Levin]

From: Ajay Singh <ajay.kathat@microchip.com>

[ Upstream commit 328efda22af81130c2ad981c110518cb29ff2f1d ]

Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to
"NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to
set the interface name in the workqueue name. However, while the driver
needs only one workqueue, the wilc_netdev_ifc_init is called each time we
add an interface over a phy, which in turns overwrite the workqueue with a
new one. This can be observed with the following commands:

for i in $(seq 0 10)
do
  iw phy phy0 interface add wlan1 type managed
  iw dev wlan1 del
done
ps -eo pid,comm|grep wlan

 39 kworker/R-wlan0
 98 kworker/R-wlan1
102 kworker/R-wlan1
105 kworker/R-wlan1
108 kworker/R-wlan1
111 kworker/R-wlan1
114 kworker/R-wlan1
117 kworker/R-wlan1
120 kworker/R-wlan1
123 kworker/R-wlan1
126 kworker/R-wlan1
129 kworker/R-wlan1

Fix this leakage by putting back hif_workqueue allocation in
wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to
set it lowercase, however it is not  attached to a specific netdev, so
enforcing netdev name in the name is not so relevant. Still, enrich the
name with the wiphy name to make it clear which phy is using the workqueue.

Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115-wilc_1000_fixes-v1-3-54d29463a738@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/cfg80211.c | 11 ++++++++++-
 drivers/net/wireless/microchip/wilc1000/netdev.c   | 10 +---------
 2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index da52f91693b5b..fec18be90697c 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1810,15 +1810,24 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 	INIT_LIST_HEAD(&wl->rxq_head.list);
 	INIT_LIST_HEAD(&wl->vif_list);
 
+	wl->hif_workqueue = alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM,
+						    wiphy_name(wl->wiphy));
+	if (!wl->hif_workqueue) {
+		ret = -ENOMEM;
+		goto free_cfg;
+	}
 	vif = wilc_netdev_ifc_init(wl, "wlan%d", WILC_STATION_MODE,
 				   NL80211_IFTYPE_STATION, false);
 	if (IS_ERR(vif)) {
 		ret = PTR_ERR(vif);
-		goto free_cfg;
+		goto free_hq;
 	}
 
 	return 0;
 
+free_hq:
+	destroy_workqueue(wl->hif_workqueue);
+
 free_cfg:
 	wilc_wlan_cfg_deinit(wl);
 
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 91d71e0f7ef23..d6602ced44f50 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -989,13 +989,6 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 		goto error;
 	}
 
-	wl->hif_workqueue = alloc_ordered_workqueue("%s-wq", WQ_MEM_RECLAIM,
-						    ndev->name);
-	if (!wl->hif_workqueue) {
-		ret = -ENOMEM;
-		goto unregister_netdev;
-	}
-
 	ndev->needs_free_netdev = true;
 	vif->iftype = vif_type;
 	vif->idx = wilc_get_available_idx(wl);
@@ -1008,12 +1001,11 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name,
 
 	return vif;
 
-unregister_netdev:
+error:
 	if (rtnl_locked)
 		cfg80211_unregister_netdevice(ndev);
 	else
 		unregister_netdev(ndev);
-  error:
 	free_netdev(ndev);
 	return ERR_PTR(ret);
 }
-- 
2.43.0

[PATCH 6.7 140/713] wifi: wilc1000: fix multi-vif management when deleting a vif

[Sasha Levin]

From: Ajay Singh <ajay.kathat@microchip.com>

[ Upstream commit 12cfc9c8d3faf887a202c89bc312202445fca7e8 ]

Adding then removing a second vif currently makes the first vif not working
anymore. This is visible for example when we have a first interface
connected to some access point:
- create a wpa_supplicant.conf with some AP credentials
- wpa_supplicant -Dnl80211 -c /etc/wpa_supplicant.conf -i wlan0
- dhclient wlan0
- iw phy phy0 interface add wlan1 type managed
- iw dev wlan1 del
wlan0 does not manage properly traffic anymore (eg: ping not working)

This is due to vif mode being incorrectly reconfigured with some default
values in del_virtual_intf, affecting by default first vif.

Prevent first vif from being affected on second vif removal by removing vif
mode change command in del_virtual_intf

Fixes: 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115-wilc_1000_fixes-v1-5-54d29463a738@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/cfg80211.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index fec18be90697c..e9a047a8c7dce 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1615,7 +1615,6 @@ static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 	cfg80211_unregister_netdevice(vif->ndev);
 	vif->monitor_flag = 0;
 
-	wilc_set_operation_mode(vif, 0, 0, 0);
 	mutex_lock(&wl->vif_mutex);
 	list_del_rcu(&vif->list);
 	wl->vif_num--;
-- 
2.43.0

[PATCH 6.7 141/713] wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()

[Sasha Levin]

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit 50180c7f8e3de7c2d87f619131776598fcb1478d ]

debugfs_create_dir() returns ERR_PTR and never return NULL.

As Russell suggested, this patch removes the error checking for
debugfs_create_dir(). This is because the DebugFS kernel API is developed
in a way that the caller can safely ignore the errors that occur during
the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in
start_creating() which can handle it gracefully. So these checks are
unnecessary.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20230903030216.1509013-3-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/debugfs.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/debugfs.c b/drivers/net/wireless/marvell/mwifiex/debugfs.c
index f9c9fec7c792a..d14a0f4c1b6d7 100644
--- a/drivers/net/wireless/marvell/mwifiex/debugfs.c
+++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
@@ -970,9 +970,6 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
 	priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
 					       mwifiex_dfs_dir);
 
-	if (!priv->dfs_dev_dir)
-		return;
-
 	MWIFIEX_DFS_ADD_FILE(info);
 	MWIFIEX_DFS_ADD_FILE(debug);
 	MWIFIEX_DFS_ADD_FILE(getlog);
-- 
2.43.0

[PATCH 6.7 142/713] ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 090c4094574705b0afc7d37825cdc5d06f0e7e02 ]

External clocks should be defined as zero-Hz clocks in the SoC .dtsi,
and overridden in the board .dts when present.

Correct the clock rate of extal1 from 25 to 26 MHz, to match the crystal
oscillator present on the APE6-EVM board.

Fixes: a76809a329d6ebae ("ARM: shmobile: r8a73a4: Common clock framework DT description")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1692bc8cd465d62168cbf110522ad62a7af3f606.1705315614.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts | 12 ++++++++++++
 arch/arm/boot/dts/renesas/r8a73a4.dtsi        |  9 ++++++---
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index ed75c01dbee10..3d02f065f71c2 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@ &cmt1 {
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c39066967053f..d1f4cbd099efb 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@ clocks {
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
-- 
2.43.0

[PATCH 6.7 143/713] arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 3c58b96df110a80e78fa36ef928f1e6c375008e3 ]

Most of GCC is powered by the CX rail. Describe that relationship to
let the performance state requests trickle up the chain.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-2-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index b389d49d3ec8c..b1d9853419415 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -781,6 +781,7 @@ gcc: clock-controller@100000 {
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk";
+			power-domains = <&rpmhpd SC8180X_CX>;
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
-- 
2.43.0

[PATCH 6.7 144/713] arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 266a3a92044b89c392b3e9cfcc328d4167c18294 ]

The entry latency was oddly low.. Turns out somebody forgot about a
second '1'! Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-3-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index b1d9853419415..f2eedbdc025c3 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -289,7 +289,7 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
+				entry-latency-us = <2411>;
 				exit-latency-us = <1461>;
 				min-residency-us = <4488>;
 				local-timer-stop;
-- 
2.43.0

[PATCH 6.7 145/713] arm64: dts: qcom: sc8180x: Add missing CPU off state

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 07b600dfdfea65d58dd80ea25becd8cff69bfafc ]

The CPUs can be powered off without pulling the plug from the rest of
the system. Describe the idle state responsible for this.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-4-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index f2eedbdc025c3..a7acaa8ca6055 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -297,7 +297,15 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <3300>;
+				exit-latency-us = <3300>;
+				min-residency-us = <6000>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100a344>;
 				entry-latency-us = <3263>;
@@ -581,7 +589,7 @@ CPU_PD7: power-domain-cpu7 {
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
 		};
 	};
 
-- 
2.43.0

[PATCH 6.7 146/713] arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 24e98cb3d5e2c86565680e00008a794b4eac0040 ]

The (e)DP PHYs are powered by the MX line, not through the MDSS GDSC.
Fix that up.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-5-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index a7acaa8ca6055..df40157f2ec63 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3186,7 +3186,7 @@ edp_phy: phy@aec2a00 {
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
-			power-domains = <&dispcc MDSS_GDSC>;
+			power-domains = <&rpmhpd SC8180X_MX>;
 
 			#clock-cells = <1>;
 			#phy-cells = <0>;
-- 
2.43.0

[PATCH 6.7 147/713] arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 309b5774f45aafd002efdb2656673542419abd6f ]

There's an OPP table to handle this, drop the permanent vote.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-6-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index df40157f2ec63..687efe3404ce5 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2723,10 +2723,8 @@ mdss_mdp: mdp@ae01000 {
 					      "core",
 					      "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
-- 
2.43.0

[PATCH 6.7 148/713] arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 6d9fb9e4c473cdfd2adca019b46d8e482105cae7 ]

To ensure the PLLs are getting enough power, cast a vote with DISPCC so
that MMCX is at least at LOW_SVS.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-7-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 687efe3404ce5..881b4e0d5b8b4 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3210,6 +3210,7 @@ dispcc: clock-controller@af00000 {
 				      "edp_phy_pll_link_clk",
 				      "edp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-- 
2.43.0

[PATCH 6.7 149/713] arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit dcad0590d1ea4278a55c30dd2903611a96111601 ]

The AOSS_QMP region is overallocated, bleeding into space that's supposed
to be used by other peripherals. Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231230-topic-8180_more_fixes-v1-9-93b5c107ed43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 881b4e0d5b8b4..6760f6a340975 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3249,7 +3249,7 @@ tsens1: thermal-sensor@c265000 {
 
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x100000>;
+			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
-- 
2.43.0

[PATCH 6.7 150/713] cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value

[Sasha Levin]

From: Anastasia Belova <abelova@astralinux.ru>

[ Upstream commit f661017e6d326ee187db24194cabb013d81bc2a6 ]

cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return 0 in case of error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/brcmstb-avs-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 35fb3a559ea97..1a1857b0a6f48 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -481,6 +481,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
 	struct private_data *priv = policy->driver_data;
 
 	cpufreq_cpu_put(policy);
-- 
2.43.0

[PATCH 6.7 151/713] cpufreq: mediatek-hw: Wait for CPU supplies before probing

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 788715b5f21c6455264fe00a1779e61bec407fe2 ]

Before proceeding with the probe and enabling frequency scaling for the
CPUs, make sure that all supplies feeding the CPUs have probed.

This fixes an issue observed on MT8195-Tomato where if the
mediatek-cpufreq-hw driver enabled the hardware (by writing to
REG_FREQ_ENABLE) before the SPMI controller driver (spmi-mtk-pmif),
behind which lies the big CPU supply, probed the platform would hang
shortly after with "rcu: INFO: rcu_preempt detected stalls on
CPUs/tasks" being printed in the log.

Fixes: 4855e26bcf4d ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/mediatek-cpufreq-hw.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
index d46afb3c00923..a1aa9385980ae 100644
--- a/drivers/cpufreq/mediatek-cpufreq-hw.c
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
 #define LUT_MAX_ENTRIES			32U
@@ -300,7 +301,23 @@ static struct cpufreq_driver cpufreq_mtk_hw_driver = {
 static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
 {
 	const void *data;
-	int ret;
+	int ret, cpu;
+	struct device *cpu_dev;
+	struct regulator *cpu_reg;
+
+	/* Make sure that all CPU supplies are available before proceeding. */
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev)
+			return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
+					     "Failed to get cpu%d device\n", cpu);
+
+		cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu");
+		if (IS_ERR(cpu_reg))
+			return dev_err_probe(&pdev->dev, PTR_ERR(cpu_reg),
+					     "CPU%d regulator get failed\n", cpu);
+	}
+
 
 	data = of_device_get_match_data(&pdev->dev);
 	if (!data)
-- 
2.43.0

[PATCH 6.7 152/713] sock_diag: annotate data-races around sock_diag_handlers[family]

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit efd402537673f9951992aea4ef0f5ff51d858f4b ]

__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: 8ef874bfc729 ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock_diag.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c
index b1e29e18d1d60..c53b731f2d672 100644
--- a/net/core/sock_diag.c
+++ b/net/core/sock_diag.c
@@ -193,7 +193,7 @@ int sock_diag_register(const struct sock_diag_handler *hndl)
 	if (sock_diag_handlers[hndl->family])
 		err = -EBUSY;
 	else
-		sock_diag_handlers[hndl->family] = hndl;
+		WRITE_ONCE(sock_diag_handlers[hndl->family], hndl);
 	mutex_unlock(&sock_diag_table_mutex);
 
 	return err;
@@ -209,7 +209,7 @@ void sock_diag_unregister(const struct sock_diag_handler *hnld)
 
 	mutex_lock(&sock_diag_table_mutex);
 	BUG_ON(sock_diag_handlers[family] != hnld);
-	sock_diag_handlers[family] = NULL;
+	WRITE_ONCE(sock_diag_handlers[family], NULL);
 	mutex_unlock(&sock_diag_table_mutex);
 }
 EXPORT_SYMBOL_GPL(sock_diag_unregister);
@@ -227,7 +227,7 @@ static int __sock_diag_cmd(struct sk_buff *skb, struct nlmsghdr *nlh)
 		return -EINVAL;
 	req->sdiag_family = array_index_nospec(req->sdiag_family, AF_MAX);
 
-	if (sock_diag_handlers[req->sdiag_family] == NULL)
+	if (READ_ONCE(sock_diag_handlers[req->sdiag_family]) == NULL)
 		sock_load_diag_module(req->sdiag_family, 0);
 
 	mutex_lock(&sock_diag_table_mutex);
@@ -286,12 +286,12 @@ static int sock_diag_bind(struct net *net, int group)
 	switch (group) {
 	case SKNLGRP_INET_TCP_DESTROY:
 	case SKNLGRP_INET_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET]))
 			sock_load_diag_module(AF_INET, 0);
 		break;
 	case SKNLGRP_INET6_TCP_DESTROY:
 	case SKNLGRP_INET6_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET6])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET6]))
 			sock_load_diag_module(AF_INET6, 0);
 		break;
 	}
-- 
2.43.0

[PATCH 6.7 153/713] inet_diag: annotate data-races around inet_diag_table[]

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e50e10ae5d81ddb41547114bfdc5edc04422f082 ]

inet_diag_lock_handler() reads inet_diag_table[proto] locklessly.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: d523a328fb02 ("[INET]: Fix inet_diag dead-lock regression")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_diag.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 7d0e7aaa71e0a..5f7fdbd01cf9b 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -57,7 +57,7 @@ static const struct inet_diag_handler *inet_diag_lock_handler(int proto)
 		return ERR_PTR(-ENOENT);
 	}
 
-	if (!inet_diag_table[proto])
+	if (!READ_ONCE(inet_diag_table[proto]))
 		sock_load_diag_module(AF_INET, proto);
 
 	mutex_lock(&inet_diag_table_mutex);
@@ -1419,7 +1419,7 @@ int inet_diag_register(const struct inet_diag_handler *h)
 	mutex_lock(&inet_diag_table_mutex);
 	err = -EEXIST;
 	if (!inet_diag_table[type]) {
-		inet_diag_table[type] = h;
+		WRITE_ONCE(inet_diag_table[type], h);
 		err = 0;
 	}
 	mutex_unlock(&inet_diag_table_mutex);
@@ -1436,7 +1436,7 @@ void inet_diag_unregister(const struct inet_diag_handler *h)
 		return;
 
 	mutex_lock(&inet_diag_table_mutex);
-	inet_diag_table[type] = NULL;
+	WRITE_ONCE(inet_diag_table[type], NULL);
 	mutex_unlock(&inet_diag_table_mutex);
 }
 EXPORT_SYMBOL_GPL(inet_diag_unregister);
-- 
2.43.0

[PATCH 6.7 154/713] bpftool: Silence build warning about calloc()

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit f5f30386c78105cba520e443a6a9ee945ec1d066 ]

There exists the following warning when building bpftool:

  CC      prog.o
prog.c: In function ‘profile_open_perf_events’:
prog.c:2301:24: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
 2301 |                 sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
      |                        ^~~
prog.c:2301:24: note: earlier argument should specify number of elements, later size of each element

Tested with the latest upstream GCC which contains a new warning option
-Wcalloc-transposed-args. The first argument to calloc is documented to
be number of elements in array, while the second argument is size of each
element, just switch the first and second arguments of calloc() to silence
the build warning, compile tested only.

Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240116061920.31172-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/prog.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 7ec4f5671e7a9..865bfa869a5b2 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -2294,7 +2294,7 @@ static int profile_open_perf_events(struct profiler_bpf *obj)
 	int map_fd;
 
 	profile_perf_events = calloc(
-		sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
+		obj->rodata->num_cpu * obj->rodata->num_metric, sizeof(int));
 	if (!profile_perf_events) {
 		p_err("failed to allocate memory for perf_event array: %s",
 		      strerror(errno));
-- 
2.43.0

[PATCH 6.7 155/713] selftests/bpf: Fix potential premature unload in bpf_testmod

[Sasha Levin]

From: Artem Savkov <asavkov@redhat.com>

[ Upstream commit d177c1be06ce28aa8c8710ac55be1b5ad3f314c6 ]

It is possible for bpf_kfunc_call_test_release() to be called from
bpf_map_free_deferred() when bpf_testmod is already unloaded and
perf_test_stuct.cnt which it tries to decrease is no longer in memory.
This patch tries to fix the issue by waiting for all references to be
dropped in bpf_testmod_exit().

The issue can be triggered by running 'test_progs -t map_kptr' in 6.5,
but is obscured in 6.6 by d119357d07435 ("rcu-tasks: Treat only
synchronous grace periods urgently").

Fixes: 65eb006d85a2 ("bpf: Move kernel test kfuncs to bpf_testmod")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/82f55c0e-0ec8-4fe1-8d8c-b1de07558ad9@linux.dev
Link: https://lore.kernel.org/bpf/20240110085737.8895-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
index 91907b321f913..e7c9e1c7fde04 100644
--- a/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
+++ b/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c
@@ -2,6 +2,7 @@
 /* Copyright (c) 2020 Facebook */
 #include <linux/btf.h>
 #include <linux/btf_ids.h>
+#include <linux/delay.h>
 #include <linux/error-injection.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -544,6 +545,14 @@ static int bpf_testmod_init(void)
 
 static void bpf_testmod_exit(void)
 {
+        /* Need to wait for all references to be dropped because
+         * bpf_kfunc_call_test_release() which currently resides in kernel can
+         * be called after bpf_testmod is unloaded. Once release function is
+         * moved into the module this wait can be removed.
+         */
+	while (refcount_read(&prog_test_struct.cnt) > 1)
+		msleep(20);
+
 	return sysfs_remove_bin_file(kernel_kobj, &bin_attr_bpf_testmod_file);
 }
 
-- 
2.43.0

[PATCH 6.7 156/713] libbpf: Apply map_set_def_max_entries() for inner_maps on creation

[Sasha Levin]

From: Andrey Grafin <conquistador@yandex-team.ru>

[ Upstream commit f04deb90e516e8e48bf8693397529bc942a9e80b ]

This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().

Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.

Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index df1b550f7460a..ca83af916ccb0 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -70,6 +70,7 @@
 
 static struct bpf_map *bpf_object__add_map(struct bpf_object *obj);
 static bool prog_is_subprog(const struct bpf_object *obj, const struct bpf_program *prog);
+static int map_set_def_max_entries(struct bpf_map *map);
 
 static const char * const attach_type_name[] = {
 	[BPF_CGROUP_INET_INGRESS]	= "cgroup_inet_ingress",
@@ -5214,6 +5215,9 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 
 	if (bpf_map_type__is_map_in_map(def->type)) {
 		if (map->inner_map) {
+			err = map_set_def_max_entries(map->inner_map);
+			if (err)
+				return err;
 			err = bpf_object__create_map(obj, map->inner_map, true);
 			if (err) {
 				pr_warn("map '%s': failed to create inner map: %d\n",
-- 
2.43.0

[PATCH 6.7 157/713] selftest/bpf: Add map_in_maps with BPF_MAP_TYPE_PERF_EVENT_ARRAY values

[Sasha Levin]

From: Andrey Grafin <conquistador@yandex-team.ru>

[ Upstream commit 40628f9fff73adecac77a9aa390f8016724cad99 ]

Check that bpf_object__load() successfully creates map_in_maps
with BPF_MAP_TYPE_PERF_EVENT_ARRAY values.
These changes cover fix in the previous patch
"libbpf: Apply map_set_def_max_entries() for inner_maps on creation".

A command line output is:
- w/o fix
$ sudo ./test_maps
libbpf: map 'mim_array_pe': failed to create inner map: -22
libbpf: map 'mim_array_pe': failed to create: Invalid argument(-22)
libbpf: failed to load object './test_map_in_map.bpf.o'
Failed to load test prog

- with fix
$ sudo ./test_maps
...
test_maps: OK, 0 SKIPPED

Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-2-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/progs/test_map_in_map.c     | 26 +++++++++++++++++++
 tools/testing/selftests/bpf/test_maps.c       |  6 ++++-
 2 files changed, 31 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/test_map_in_map.c b/tools/testing/selftests/bpf/progs/test_map_in_map.c
index f416032ba858b..b295f9b721bf8 100644
--- a/tools/testing/selftests/bpf/progs/test_map_in_map.c
+++ b/tools/testing/selftests/bpf/progs/test_map_in_map.c
@@ -21,6 +21,32 @@ struct {
 	__type(value, __u32);
 } mim_hash SEC(".maps");
 
+/* The following three maps are used to test
+ * perf_event_array map can be an inner
+ * map of hash/array_of_maps.
+ */
+struct perf_event_array {
+	__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
+	__type(key, __u32);
+	__type(value, __u32);
+} inner_map0 SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY_OF_MAPS);
+	__uint(max_entries, 1);
+	__type(key, __u32);
+	__array(values, struct perf_event_array);
+} mim_array_pe SEC(".maps") = {
+	.values = {&inner_map0}};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
+	__uint(max_entries, 1);
+	__type(key, __u32);
+	__array(values, struct perf_event_array);
+} mim_hash_pe SEC(".maps") = {
+	.values = {&inner_map0}};
+
 SEC("xdp")
 int xdp_mimtest0(struct xdp_md *ctx)
 {
diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 7fc00e423e4dd..e0dd101c9f2bd 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -1190,7 +1190,11 @@ static void test_map_in_map(void)
 		goto out_map_in_map;
 	}
 
-	bpf_object__load(obj);
+	err = bpf_object__load(obj);
+	if (err) {
+		printf("Failed to load test prog\n");
+		goto out_map_in_map;
+	}
 
 	map = bpf_object__find_map_by_name(obj, "mim_array");
 	if (!map) {
-- 
2.43.0

[PATCH 6.7 158/713] wifi: ath12k: Fix issues in channel list update

[Sasha Levin]

From: Sriram R <quic_srirrama@quicinc.com>

[ Upstream commit 67a48d937fac917947540c9f89630d472cd61fcb ]

Currently, the logic used to select the 6 GHz band is incorrect,
which may cause 6 GHz supported channels to not be updated properly.
This is because the 6 GHz Max frequency supported by the driver is
being compared to the Max frequency supported on the board. If in
some cases, the 6 GHz Max frequency supported on the board is less
than the defined 6 GHz Max frequency, all 6 GHz channels are disabled.
To address this, compare the max frequency supported by the board to
the defined 6 GHz Minimum frequency by the driver.

Similarly, when a dual mac card supports both 6 GHz and 5 GHz radios,
if the 5 GHz radio gets enumerated first before 6 GHz, the checks in
ath12k_mac_setup_channels_rates() can cause the 5 GHz channels which
were enabled earlier to get disabled when the 6 GHz channel list is
updated. This is because the Min 6 GHz frequency defined in the driver
is 5945 MHz, which should be 5925 MHz since channel 2 is not considered
currently, but the firmware can pass 5925 MHz as the minimum.
Hence, update the Min frequency supported by the driver to 5925 MHz.

In addition, ensure that the channel list update to firmware updates
only the channels that the current radio (ar) supports rather than
considering the wiphy support. This would be required when multiple pdevs
are supported in a wiphy and they support different ranges of frequencies
or bands as in single wiphy support.

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240117062628.8260-1-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/core.h | 2 +-
 drivers/net/wireless/ath/ath12k/mac.c  | 2 +-
 drivers/net/wireless/ath/ath12k/reg.c  | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 68c42ca44fcb5..d67494de44920 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -418,7 +418,7 @@ struct ath12k_sta {
 };
 
 #define ATH12K_MIN_5G_FREQ 4150
-#define ATH12K_MIN_6G_FREQ 5945
+#define ATH12K_MIN_6G_FREQ 5925
 #define ATH12K_MAX_6G_FREQ 7115
 #define ATH12K_NUM_CHANS 100
 #define ATH12K_MAX_5G_CHAN 173
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index b698e55a5b7bf..075ca1c34986b 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7188,7 +7188,7 @@ static int ath12k_mac_setup_channels_rates(struct ath12k *ar,
 	}
 
 	if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
-		if (reg_cap->high_5ghz_chan >= ATH12K_MAX_6G_FREQ) {
+		if (reg_cap->high_5ghz_chan >= ATH12K_MIN_6G_FREQ) {
 			channels = kmemdup(ath12k_6ghz_channels,
 					   sizeof(ath12k_6ghz_channels), GFP_KERNEL);
 			if (!channels) {
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index 5c006256c82ad..fcb76f92a7dec 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -103,7 +103,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar)
 
 	bands = hw->wiphy->bands;
 	for (band = 0; band < NUM_NL80211_BANDS; band++) {
-		if (!bands[band])
+		if (!(ar->mac.sbands[band].channels && bands[band]))
 			continue;
 
 		for (i = 0; i < bands[band]->n_channels; i++) {
@@ -129,7 +129,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar)
 	ch = arg->channel;
 
 	for (band = 0; band < NUM_NL80211_BANDS; band++) {
-		if (!bands[band])
+		if (!(ar->mac.sbands[band].channels && bands[band]))
 			continue;
 
 		for (i = 0; i < bands[band]->n_channels; i++) {
-- 
2.43.0

[PATCH 6.7 159/713] selftests/bpf: Fix the flaky tc_redirect_dtime test

[Sasha Levin]

From: Martin KaFai Lau <martin.lau@kernel.org>

[ Upstream commit 177f1d083a19af58f4b1206d299ed73689249fd8 ]

BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:

test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec

The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.

The symptom is this first connect() is always slow. In my setup, it
could take ~3s.

After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.

I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
  and triggered the ndisc_error_report() => ip6_link_failure() =>
  icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
  the ICMPV6_DEST_UNREACH message.

The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.

Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.

Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/tc_redirect.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
index 518f143c5b0fe..610887157fd85 100644
--- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
@@ -188,6 +188,7 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result)
 {
 	struct nstoken *nstoken = NULL;
 	char src_fwd_addr[IFADDR_STR_LEN+1] = {};
+	char src_addr[IFADDR_STR_LEN + 1] = {};
 	int err;
 
 	if (result->dev_mode == MODE_VETH) {
@@ -208,6 +209,9 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result)
 	if (get_ifaddr("src_fwd", src_fwd_addr))
 		goto fail;
 
+	if (get_ifaddr("src", src_addr))
+		goto fail;
+
 	result->ifindex_src = if_nametoindex("src");
 	if (!ASSERT_GT(result->ifindex_src, 0, "ifindex_src"))
 		goto fail;
@@ -270,6 +274,13 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result)
 	SYS(fail, "ip route add " IP4_DST "/32 dev dst_fwd scope global");
 	SYS(fail, "ip route add " IP6_DST "/128 dev dst_fwd scope global");
 
+	if (result->dev_mode == MODE_VETH) {
+		SYS(fail, "ip neigh add " IP4_SRC " dev src_fwd lladdr %s", src_addr);
+		SYS(fail, "ip neigh add " IP6_SRC " dev src_fwd lladdr %s", src_addr);
+		SYS(fail, "ip neigh add " IP4_DST " dev dst_fwd lladdr %s", MAC_DST);
+		SYS(fail, "ip neigh add " IP6_DST " dev dst_fwd lladdr %s", MAC_DST);
+	}
+
 	close_netns(nstoken);
 
 	/** setup in 'dst' namespace */
-- 
2.43.0

[PATCH 6.7 160/713] selftests/bpf: Wait for the netstamp_needed_key static key to be turned on

[Sasha Levin]

From: Martin KaFai Lau <martin.lau@kernel.org>

[ Upstream commit ce6f6cffaeaa0a3bcdafcae7fe03c68c3afae631 ]

After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:

rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0

The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.

The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.

This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.

To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.

Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/tc_redirect.c    | 79 ++++++++++++++++++-
 1 file changed, 75 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
index 610887157fd85..dbe06aeaa2b27 100644
--- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c
@@ -291,6 +291,7 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result)
 	SYS(fail, "ip addr add " IP4_DST "/32 dev dst");
 	SYS(fail, "ip addr add " IP6_DST "/128 dev dst nodad");
 	SYS(fail, "ip link set dev dst up");
+	SYS(fail, "ip link set dev lo up");
 
 	SYS(fail, "ip route add " IP4_SRC "/32 dev dst scope global");
 	SYS(fail, "ip route add " IP4_NET "/16 dev dst scope global");
@@ -468,7 +469,7 @@ static int set_forwarding(bool enable)
 	return 0;
 }
 
-static void rcv_tstamp(int fd, const char *expected, size_t s)
+static int __rcv_tstamp(int fd, const char *expected, size_t s, __u64 *tstamp)
 {
 	struct __kernel_timespec pkt_ts = {};
 	char ctl[CMSG_SPACE(sizeof(pkt_ts))];
@@ -489,7 +490,7 @@ static void rcv_tstamp(int fd, const char *expected, size_t s)
 
 	ret = recvmsg(fd, &msg, 0);
 	if (!ASSERT_EQ(ret, s, "recvmsg"))
-		return;
+		return -1;
 	ASSERT_STRNEQ(data, expected, s, "expected rcv data");
 
 	cmsg = CMSG_FIRSTHDR(&msg);
@@ -498,6 +499,12 @@ static void rcv_tstamp(int fd, const char *expected, size_t s)
 		memcpy(&pkt_ts, CMSG_DATA(cmsg), sizeof(pkt_ts));
 
 	pkt_ns = pkt_ts.tv_sec * NSEC_PER_SEC + pkt_ts.tv_nsec;
+	if (tstamp) {
+		/* caller will check the tstamp itself */
+		*tstamp = pkt_ns;
+		return 0;
+	}
+
 	ASSERT_NEQ(pkt_ns, 0, "pkt rcv tstamp");
 
 	ret = clock_gettime(CLOCK_REALTIME, &now_ts);
@@ -507,6 +514,60 @@ static void rcv_tstamp(int fd, const char *expected, size_t s)
 	if (ASSERT_GE(now_ns, pkt_ns, "check rcv tstamp"))
 		ASSERT_LT(now_ns - pkt_ns, 5 * NSEC_PER_SEC,
 			  "check rcv tstamp");
+	return 0;
+}
+
+static void rcv_tstamp(int fd, const char *expected, size_t s)
+{
+	__rcv_tstamp(fd, expected, s, NULL);
+}
+
+static int wait_netstamp_needed_key(void)
+{
+	int opt = 1, srv_fd = -1, cli_fd = -1, nretries = 0, err, n;
+	char buf[] = "testing testing";
+	struct nstoken *nstoken;
+	__u64 tstamp = 0;
+
+	nstoken = open_netns(NS_DST);
+	if (!nstoken)
+		return -1;
+
+	srv_fd = start_server(AF_INET6, SOCK_DGRAM, "::1", 0, 0);
+	if (!ASSERT_GE(srv_fd, 0, "start_server"))
+		goto done;
+
+	err = setsockopt(srv_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
+			 &opt, sizeof(opt));
+	if (!ASSERT_OK(err, "setsockopt(SO_TIMESTAMPNS_NEW)"))
+		goto done;
+
+	cli_fd = connect_to_fd(srv_fd, TIMEOUT_MILLIS);
+	if (!ASSERT_GE(cli_fd, 0, "connect_to_fd"))
+		goto done;
+
+again:
+	n = write(cli_fd, buf, sizeof(buf));
+	if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+		goto done;
+	err = __rcv_tstamp(srv_fd, buf, sizeof(buf), &tstamp);
+	if (!ASSERT_OK(err, "__rcv_tstamp"))
+		goto done;
+	if (!tstamp && nretries++ < 5) {
+		sleep(1);
+		printf("netstamp_needed_key retry#%d\n", nretries);
+		goto again;
+	}
+
+done:
+	if (!tstamp && srv_fd != -1) {
+		close(srv_fd);
+		srv_fd = -1;
+	}
+	if (cli_fd != -1)
+		close(cli_fd);
+	close_netns(nstoken);
+	return srv_fd;
 }
 
 static void snd_tstamp(int fd, char *b, size_t s)
@@ -843,11 +904,20 @@ static void test_tc_redirect_dtime(struct netns_setup_result *setup_result)
 {
 	struct test_tc_dtime *skel;
 	struct nstoken *nstoken;
-	int err;
+	int hold_tstamp_fd, err;
+
+	/* Hold a sk with the SOCK_TIMESTAMP set to ensure there
+	 * is no delay in the kernel net_enable_timestamp().
+	 * This ensures the following tests must have
+	 * non zero rcv tstamp in the recvmsg().
+	 */
+	hold_tstamp_fd = wait_netstamp_needed_key();
+	if (!ASSERT_GE(hold_tstamp_fd, 0, "wait_netstamp_needed_key"))
+		return;
 
 	skel = test_tc_dtime__open();
 	if (!ASSERT_OK_PTR(skel, "test_tc_dtime__open"))
-		return;
+		goto done;
 
 	skel->rodata->IFINDEX_SRC = setup_result->ifindex_src_fwd;
 	skel->rodata->IFINDEX_DST = setup_result->ifindex_dst_fwd;
@@ -892,6 +962,7 @@ static void test_tc_redirect_dtime(struct netns_setup_result *setup_result)
 
 done:
 	test_tc_dtime__destroy(skel);
+	close(hold_tstamp_fd);
 }
 
 static void test_tc_redirect_neigh_fib(struct netns_setup_result *setup_result)
-- 
2.43.0

[PATCH 6.7 161/713] wifi: mac80211: use deflink and fix typo in link ID check

[Sasha Levin]

From: Benjamin Berg <benjamin.berg@intel.com>

[ Upstream commit e10322810ce0d0d4a5a319458c4e1e052c6fe9be ]

This does not change anything effectively, but it is closer to what the
code is trying to achieve here. i.e. select the link data if it is an
MLD and fall back to using the deflink otherwise.

Fixes: 0f99f0878350 ("wifi: mac80211: Print local link address during authentication")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.4c4b1c40eb3c.I2771621dee328c618536596b7e56232df42a79c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 241e615189244..6cfc07aaa1b6c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -7502,10 +7502,10 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
 	if (err)
 		goto err_clear;
 
-	if (req->link_id > 0)
+	if (req->link_id >= 0)
 		link = sdata_dereference(sdata->link[req->link_id], sdata);
 	else
-		link = sdata_dereference(sdata->link[0], sdata);
+		link = &sdata->deflink;
 
 	if (WARN_ON(!link)) {
 		err = -ENOLINK;
-- 
2.43.0

[PATCH 6.7 162/713] wifi: iwlwifi: change link id in time event to s8

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit 6c8ce23854b66db94d88e0957e531cb074806c16 ]

Link ID in time event data is -1 when the time event is cleared.
Change the type of the link ID in the time event data structure
and in the affected function from unsigned to signed.

Fixes: 135065837310 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240123200528.50d4941f946c.Iea990b118c69bc3e1eb61c1d134c9d470b3a17ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h        | 2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
index 3be67f0ff74f7..1e33de05d2e2c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -121,7 +121,7 @@ struct iwl_mvm_time_event_data {
 	 * if the te is in the time event list or not (when id == TE_MAX)
 	 */
 	u32 id;
-	u8 link_id;
+	s8 link_id;
 };
 
  /* Power management */
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index 2e653a417d626..98c64ae315e68 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -692,7 +692,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm,
 /* Determine whether mac or link id should be used, and validate the link id */
 static int iwl_mvm_get_session_prot_id(struct iwl_mvm *mvm,
 				       struct ieee80211_vif *vif,
-				       u32 link_id)
+				       s8 link_id)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	int ver = iwl_fw_lookup_cmd_ver(mvm->fw,
@@ -716,7 +716,7 @@ static int iwl_mvm_get_session_prot_id(struct iwl_mvm *mvm,
 
 static void iwl_mvm_cancel_session_protection(struct iwl_mvm *mvm,
 					      struct ieee80211_vif *vif,
-					      u32 id, u32 link_id)
+					      u32 id, s8 link_id)
 {
 	int mac_link_id = iwl_mvm_get_session_prot_id(mvm, vif, link_id);
 	struct iwl_mvm_session_prot_cmd cmd = {
@@ -745,7 +745,7 @@ static bool __iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
 	struct ieee80211_vif *vif = te_data->vif;
 	struct iwl_mvm_vif *mvmvif;
 	enum nl80211_iftype iftype;
-	unsigned int link_id;
+	s8 link_id;
 
 	if (!vif)
 		return false;
@@ -1297,7 +1297,7 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
 	struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data;
 	const u16 notif[] = { WIDE_ID(MAC_CONF_GROUP, SESSION_PROTECTION_NOTIF) };
 	struct iwl_notification_wait wait_notif;
-	int mac_link_id = iwl_mvm_get_session_prot_id(mvm, vif, link_id);
+	int mac_link_id = iwl_mvm_get_session_prot_id(mvm, vif, (s8)link_id);
 	struct iwl_mvm_session_prot_cmd cmd = {
 		.id_and_color = cpu_to_le32(mac_link_id),
 		.action = cpu_to_le32(FW_CTXT_ACTION_ADD),
-- 
2.43.0

[PATCH 6.7 163/713] af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 31e03207119a535d0b0e3b3a7f91983aeb2cb14d ]

gc_in_progress is changed under spin_lock(&unix_gc_lock),
but wait_for_unix_gc() reads it locklessly.

Let's use READ_ONCE().

Fixes: 5f23b734963e ("net: Fix soft lockups/OOM issues w/ unix garbage collector")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240123170856.41348-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/garbage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 2a81880dac7b7..027c86e804f8a 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -198,7 +198,7 @@ void wait_for_unix_gc(void)
 	if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
 	    !READ_ONCE(gc_in_progress))
 		unix_gc();
-	wait_event(unix_gc_wait, gc_in_progress == false);
+	wait_event(unix_gc_wait, !READ_ONCE(gc_in_progress));
 }
 
 /* The external entry point: unix_gc() */
-- 
2.43.0

[PATCH 6.7 164/713] arm64: dts: qcom: sm8450: Add missing interconnects to serial

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 6e115b75b43bd12d4061e53c8ff175e387783d8a ]

The serial ports did not have their interconnect paths specified when
they were first introduced. Fix that.

Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240116-topic-8450serial-v1-1-b685e6a5ad78@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index f82480570d4b6..9d06fb0d4d1fd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1026,6 +1026,12 @@ uart20: serial@894000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1418,6 +1424,12 @@ uart7: serial@99c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};
-- 
2.43.0

[PATCH 6.7 165/713] soc: qcom: socinfo: rename PM2250 to PM4125

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 5155e48128826d0c5999dc9f47aa746df54da448 ]

It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.

Fixes: 082f9bc60f33 ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs")
Fixes: 112d96fd2927 ("soc: qcom: socinfo: Add some PMICs")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/socinfo.c        | 2 +-
 include/soc/qcom/qcom-spmi-pmic.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 51e05bec5bfce..9865964cf6dbf 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -114,7 +114,7 @@ static const char *const pmic_models[] = {
 	[50] = "PM8350B",
 	[51] = "PMR735A",
 	[52] = "PMR735B",
-	[55] = "PM2250",
+	[55] = "PM4125",
 	[58] = "PM8450",
 	[65] = "PM8010",
 	[69] = "PM8550VS",
diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h
index c47cc71a999ec..fdd462b295927 100644
--- a/include/soc/qcom/qcom-spmi-pmic.h
+++ b/include/soc/qcom/qcom-spmi-pmic.h
@@ -48,7 +48,7 @@
 #define PMK8350_SUBTYPE		0x2f
 #define PMR735B_SUBTYPE		0x34
 #define PM6350_SUBTYPE		0x36
-#define PM2250_SUBTYPE		0x37
+#define PM4125_SUBTYPE		0x37
 
 #define PMI8998_FAB_ID_SMIC	0x11
 #define PMI8998_FAB_ID_GF	0x30
-- 
2.43.0

[PATCH 6.7 166/713] arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming

[Sasha Levin]

From: David Heidelberg <david@ixit.cz>

[ Upstream commit afe9867a0c0e10ba618c15d4ef6f8699872f6cc3 ]

Make it easier to understand what the reg in those nodes is by using the
constants provided by qcom,q6dsp-lpass-ports.h.

Name nodes according to dt-binding expectations.

Fix for
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb: service@4: dais: Unevaluated properties are not allowed ('qi2s@22', 'qi2s@23' were unexpected)
```

Fixes: b7b734286856 ("arm64: dts: qcom: sdm845-oneplus-*: add audio devices")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231229200245.259689-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index b523b5fff7022..13d7e088aa2e1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -485,13 +485,13 @@ &pmi8998_charger {
 };
 
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <1>;
 	};
 
-	qi2s@23 {
-		reg = <23>;
+	dai@23 {
+		reg = <QUATERNARY_MI2S_TX>;
 		qcom,sd-lines = <0>;
 	};
 };
-- 
2.43.0

[PATCH 6.7 167/713] cpufreq: mediatek-hw: Don't error out if supply is not found

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit eaffb10b51bf74415c9252fd8fb4dd77122501ee ]

devm_regulator_get_optional() returns -ENODEV if no supply can be found.
By introducing its usage, commit 788715b5f21c ("cpufreq: mediatek-hw:
Wait for CPU supplies before probing") caused the driver to fail probe
if no supply was present in any of the CPU DT nodes.

Use devm_regulator_get() instead since the CPUs do require supplies
even if not described in the DT. It will gracefully return a dummy
regulator if none is found in the DT node, allowing probe to succeed.

Fixes: 788715b5f21c ("cpufreq: mediatek-hw: Wait for CPU supplies before probing")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/case/id/65b0b169710edea22852a3fa/
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/mediatek-cpufreq-hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
index a1aa9385980ae..8d097dcddda47 100644
--- a/drivers/cpufreq/mediatek-cpufreq-hw.c
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -312,7 +312,7 @@ static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
 			return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
 					     "Failed to get cpu%d device\n", cpu);
 
-		cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu");
+		cpu_reg = devm_regulator_get(cpu_dev, "cpu");
 		if (IS_ERR(cpu_reg))
 			return dev_err_probe(&pdev->dev, PTR_ERR(cpu_reg),
 					     "CPU%d regulator get failed\n", cpu);
-- 
2.43.0

[PATCH 6.7 168/713] libbpf: Fix faccessat() usage on Android

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit ad57654053805bf9a62602aaec74cc78edb6f235 ]

Android implementation of libc errors out with -EINVAL in faccessat() if
passed AT_EACCESS ([0]), this leads to ridiculous issue with libbpf
refusing to load /sys/kernel/btf/vmlinux on Androids ([1]). Fix by
detecting Android and redefining AT_EACCESS to 0, it's equivalent on
Android.

  [0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
  [1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250

Fixes: 6a4ab8869d0b ("libbpf: Fix the case of running as non-root with capabilities")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240126220944.2497665-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf_internal.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/tools/lib/bpf/libbpf_internal.h b/tools/lib/bpf/libbpf_internal.h
index f0f08635adb0d..57dec645d6878 100644
--- a/tools/lib/bpf/libbpf_internal.h
+++ b/tools/lib/bpf/libbpf_internal.h
@@ -18,6 +18,20 @@
 #include <libelf.h>
 #include "relo_core.h"
 
+/* Android's libc doesn't support AT_EACCESS in faccessat() implementation
+ * ([0]), and just returns -EINVAL even if file exists and is accessible.
+ * See [1] for issues caused by this.
+ *
+ * So just redefine it to 0 on Android.
+ *
+ * [0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
+ * [1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250
+ */
+#ifdef __ANDROID__
+#undef AT_EACCESS
+#define AT_EACCESS 0
+#endif
+
 /* make sure libbpf doesn't use kernel-only integer typedefs */
 #pragma GCC poison u8 u16 u32 u64 s8 s16 s32 s64
 
-- 
2.43.0

[PATCH 6.7 169/713] pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl

[Sasha Levin]

From: Bjorn Andersson <quic_bjorande@quicinc.com>

[ Upstream commit 883957bee580b723fd87d49ac73e0c84fc03a446 ]

On SA8295P and SA8540P gfx.lvl is not provdied by rpmh, but rather is
handled by an external regulator (max20411). Drop gfx.lvl from the list
of power-domains exposed on this platform.

Fixes: f68f1cb3437d ("soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-4-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pmdomain/qcom/rpmhpd.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pmdomain/qcom/rpmhpd.c b/drivers/pmdomain/qcom/rpmhpd.c
index 0f0943e3efe50..e4d5afab7b3b2 100644
--- a/drivers/pmdomain/qcom/rpmhpd.c
+++ b/drivers/pmdomain/qcom/rpmhpd.c
@@ -217,7 +217,6 @@ static struct rpmhpd *sa8540p_rpmhpds[] = {
 	[SC8280XP_CX] = &cx,
 	[SC8280XP_CX_AO] = &cx_ao,
 	[SC8280XP_EBI] = &ebi,
-	[SC8280XP_GFX] = &gfx,
 	[SC8280XP_LCX] = &lcx,
 	[SC8280XP_LMX] = &lmx,
 	[SC8280XP_MMCX] = &mmcx,
-- 
2.43.0

[PATCH 6.7 170/713] arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc

[Sasha Levin]

From: Bjorn Andersson <quic_bjorande@quicinc.com>

[ Upstream commit fd5821a1a83c969ed2dcc72fef885f3a82c1d978 ]

The SA8295P and SA8540P uses an external regulator (max20411), and
gfx.lvl is not provided by rpmh. Drop the power-domains property of the
gpucc node to reflect this.

Fixes: eec51ab2fd6f ("arm64: dts: qcom: sc8280xp: Add GPU related nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-5-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sa8540p.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 96b2c59ad02b4..23888029cc117 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@ opp-2592000000 {
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
-- 
2.43.0

[PATCH 6.7 171/713] arm64: dts: renesas: r8a779g0: Restore sort order

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 8b93657c976a61726d7ffbe8d019b84b4abfb673 ]

Numerical by unit address, alphabetical by node name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f00ef274a73c8fd60f940a1649423a8927b9ae8a.1705324708.git.geert+renesas@glider.be
Stable-dep-of: 08e799f6bce8 ("arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 72 +++++++++++------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d3d25e077c5d5..3be1159982b20 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -161,11 +161,6 @@ L3_CA76_1: cache-controller-1 {
 		};
 	};
 
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -185,6 +180,11 @@ pmu_a76 {
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	/* External SCIF clock - to be overridden by boards that provide it */
 	scif_clk: scif {
 		compatible = "fixed-clock";
@@ -1777,6 +1777,37 @@ ssi0: ssi-0 {
 			};
 		};
 
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		ipmmu_rt0: iommu@ee480000 {
 			compatible = "renesas,ipmmu-r8a779g0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
@@ -1886,37 +1917,6 @@ ipmmu_mm: iommu@eefc0000 {
 			#iommu-cells = <1>;
 		};
 
-		mmc0: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a779g0",
-				     "renesas,rcar-gen4-sdhi";
-			reg = <0 0xee140000 0 0x2000>;
-			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>,
-				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
-			clock-names = "core", "clkh";
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			max-frequency = <200000000>;
-			iommus = <&ipmmu_ds0 32>;
-			status = "disabled";
-		};
-
-		rpc: spi@ee200000 {
-			compatible = "renesas,r8a779g0-rpc-if",
-				     "renesas,rcar-gen4-rpc-if";
-			reg = <0 0xee200000 0 0x200>,
-			      <0 0x08000000 0 0x04000000>,
-			      <0 0xee208000 0 0x100>;
-			reg-names = "regs", "dirmap", "wbuf";
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 629>;
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 629>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
-- 
2.43.0

[PATCH 6.7 172/713] arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 08e799f6bce80dd63c174d8d0fc61d1a6149960b ]

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes: a4c31c56d2d35641 ("arm64: dts: renesas: r8a779g0: Add SCIF nodes")
Fixes: 39d9dfc6fbe1860e ("arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/72f20c1bf32187bd30a963cafe27252907d661f9.1705589612.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 3be1159982b20..0c83940b3d8a1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -185,13 +185,19 @@ psci {
 		method = "smc";
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -681,7 +687,7 @@ hscif2: serial@e6560000 {
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
 			       <&dmac1 0x35>, <&dmac1 0x34>;
@@ -1057,7 +1063,7 @@ scif4: serial@e6c40000 {
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
 			       <&dmac1 0x59>, <&dmac1 0x58>;
-- 
2.43.0

[PATCH 6.7 173/713] selftests/bpf: Disable IPv6 for lwt_redirect test

[Sasha Levin]

From: Manu Bretelle <chantr4@gmail.com>

[ Upstream commit 2ef61296d2844c6a4211e07ab70ef2fb412b2c30 ]

After a recent change in the vmtest runner, this test started failing
sporadically.

Investigation showed that this test was subject to race condition which
got exacerbated after the vm runner change. The symptoms being that the
logic that waited for an ICMPv4 packet is naive and will break if 5 or
more non-ICMPv4 packets make it to tap0.
When ICMPv6 is enabled, the kernel will generate traffic such as ICMPv6
router solicitation...
On a system with good performance, the expected ICMPv4 packet would very
likely make it to the network interface promptly, but on a system with
poor performance, those "guarantees" do not hold true anymore.

Given that the test is IPv4 only, this change disable IPv6 in the test
netns by setting `net.ipv6.conf.all.disable_ipv6` to 1.
This essentially leaves "ping" as the sole generator of traffic in the
network namespace.
If this test was to be made IPv6 compatible, the logic in
`wait_for_packet` would need to be modified.

In more details...

At a high level, the test does:
- create a new namespace
- in `setup_redirect_target` set up lo, tap0, and link_err interfaces as
  well as add 2 routes that attaches ingress/egress sections of
  `test_lwt_redirect.bpf.o` to the xmit path.
- in `send_and_capture_test_packets` send an ICMP packet and read off
  the tap interface (using `wait_for_packet`) to check that a ICMP packet
  with the right size is read.

`wait_for_packet` will try to read `max_retry` (5) times from the tap0
fd looking for an ICMPv4 packet matching some criteria.

The problem is that when we set up the `tap0` interface, because IPv6 is
enabled by default, traffic such as Router solicitation is sent through
tap0, as in:

  # tcpdump -r /tmp/lwt_redirect.pc
  reading from file /tmp/lwt_redirect.pcap, link-type EN10MB (Ethernet)
  04:46:23.578352 IP6 :: > ff02::1:ffc0:4427: ICMP6, neighbor solicitation, who has fe80::fcba:dff:fec0:4427, length 32
  04:46:23.659522 IP6 :: > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
  04:46:24.389169 IP 10.0.0.1 > 20.0.0.9: ICMP echo request, id 122, seq 1, length 108
  04:46:24.618599 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
  04:46:24.619985 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16
  04:46:24.767326 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
  04:46:28.936402 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16

If `wait_for_packet` sees 5 non-ICMPv4 packets, it will return 0, which is what we see in:

  2024-01-31T03:51:25.0336992Z test_lwt_redirect_run:PASS:netns_create 0 nsec
  2024-01-31T03:51:25.0341309Z open_netns:PASS:malloc token 0 nsec
  2024-01-31T03:51:25.0344844Z open_netns:PASS:open /proc/self/ns/net 0 nsec
  2024-01-31T03:51:25.0350071Z open_netns:PASS:open netns fd 0 nsec
  2024-01-31T03:51:25.0353516Z open_netns:PASS:setns 0 nsec
  2024-01-31T03:51:25.0356560Z test_lwt_redirect_run:PASS:setns 0 nsec
  2024-01-31T03:51:25.0360140Z open_tuntap:PASS:open(/dev/net/tun) 0 nsec
  2024-01-31T03:51:25.0363822Z open_tuntap:PASS:ioctl(TUNSETIFF) 0 nsec
  2024-01-31T03:51:25.0367402Z open_tuntap:PASS:fcntl(O_NONBLOCK) 0 nsec
  2024-01-31T03:51:25.0371167Z setup_redirect_target:PASS:open_tuntap 0 nsec
  2024-01-31T03:51:25.0375180Z setup_redirect_target:PASS:if_nametoindex 0 nsec
  2024-01-31T03:51:25.0379929Z setup_redirect_target:PASS:ip link add link_err type dummy 0 nsec
  2024-01-31T03:51:25.0384874Z setup_redirect_target:PASS:ip link set lo up 0 nsec
  2024-01-31T03:51:25.0389678Z setup_redirect_target:PASS:ip addr add dev lo 10.0.0.1/32 0 nsec
  2024-01-31T03:51:25.0394814Z setup_redirect_target:PASS:ip link set link_err up 0 nsec
  2024-01-31T03:51:25.0399874Z setup_redirect_target:PASS:ip link set tap0 up 0 nsec
  2024-01-31T03:51:25.0407731Z setup_redirect_target:PASS:ip route add 10.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_ingress 0 nsec
  2024-01-31T03:51:25.0419105Z setup_redirect_target:PASS:ip route add 20.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_egress 0 nsec
  2024-01-31T03:51:25.0427209Z test_lwt_redirect_normal:PASS:setup_redirect_target 0 nsec
  2024-01-31T03:51:25.0431424Z ping_dev:PASS:if_nametoindex 0 nsec
  2024-01-31T03:51:25.0437222Z send_and_capture_test_packets:FAIL:wait_for_epacket unexpected wait_for_epacket: actual 0 != expected 1
  2024-01-31T03:51:25.0448298Z (/tmp/work/bpf/bpf/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c:175: errno: Success) test_lwt_redirect_normal egress test fails
  2024-01-31T03:51:25.0457124Z close_netns:PASS:setns 0 nsec

When running in a VM which potential resource contrains, the odds that calling
`ping` is not scheduled very soon after bringing `tap0` up increases,
and with this the chances to get our ICMP packet pushed to position 6+
in the network trace.

To confirm this indeed solves the issue, I ran the test 100 times in a
row with:

  errors=0
  successes=0
  for i in `seq 1 100`
  do
    ./test_progs -t lwt_redirect/lwt_redirect_normal
    if [ $? -eq 0 ]; then
      successes=$((successes+1))
    else
      errors=$((errors+1))
    fi
  done
  echo "successes: $successes/errors: $errors"

While this test would at least fail a couple of time every 10 runs, here
it ran 100 times with no error.

Fixes: 43a7c3ef8a15 ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240131053212.2247527-1-chantr4@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/lwt_redirect.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c b/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c
index 59b38569f310b..2bc932a18c17e 100644
--- a/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c
+++ b/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c
@@ -203,6 +203,7 @@ static int setup_redirect_target(const char *target_dev, bool need_mac)
 	if (!ASSERT_GE(target_index, 0, "if_nametoindex"))
 		goto fail;
 
+	SYS(fail, "sysctl -w net.ipv6.conf.all.disable_ipv6=1");
 	SYS(fail, "ip link add link_err type dummy");
 	SYS(fail, "ip link set lo up");
 	SYS(fail, "ip addr add dev lo " LOCAL_SRC "/32");
-- 
2.43.0

[PATCH 6.7 174/713] arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit 96293af54f6aa859015d8ca40a1437d3115ad50c ]

There are external pullup resistors on the board and due to silicon
errata ERR050080 let's disable the internal ones to prevent any
unwanted behavior in case they wear out.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd68576c0..0730c22e5b6b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879bf59..3e7db968f7e64 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -252,8 +252,8 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
-- 
2.43.0

[PATCH 6.7 175/713] arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit f19e5bb91d53264d7dac5d845a4825afadf72440 ]

There are external pullup resistors on the board and due to silicon
errata ERR050080 let's disable the internal ones to prevent any
unwanted behavior in case they wear out.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts  | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index dcec57c20399e..5fd2e45258b11 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -279,8 +279,8 @@ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613ee9e..2076148e08627 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
-- 
2.43.0

[PATCH 6.7 176/713] arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL OSM-S board

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit c6d9b5672a0e2c4b1079a50d2fc8780c40cfd3eb ]

These signals are actively driven by the SoC or by the onboard
transceiver. There's no need to enable the internal pull resistors
and due to silicon errata ERR050080 let's disable the internal ones
to prevent any unwanted behavior in case they wear out.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/freescale/imx8mm-kontron-bl-osm-s.dts    | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 0730c22e5b6b9..1dd03ef0a7835 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -313,19 +313,19 @@ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
-- 
2.43.0

[PATCH 6.7 177/713] arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit 162aadaa0df8217b0cc49d919dd00022fef65e78 ]

These signals are actively driven by the SoC or by the onboard
transceiver. There's no need to enable the internal pull resistors
and due to silicon errata ERR050080 let's disable the internal ones
to prevent any unwanted behavior in case they wear out.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/freescale/imx8mm-kontron-bl.dts     | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index 5fd2e45258b11..ee93db11c0d06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -292,19 +292,19 @@ MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
-- 
2.43.0

[PATCH 6.7 178/713] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL OSM-S board

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit 5a940ba3e4d7c8710c9073ff5d0ca4644d4da9db ]

Some signals have external pullup resistors on the board and don't need
the internal ones to be enabled. Due to silicon errata ERR050080 let's
disable the internal pull resistors whererever possible and prevent
any unwanted behavior in case they wear out.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/freescale/imx8mm-kontron-bl-osm-s.dts  | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 1dd03ef0a7835..d9fa0deea7002 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -337,40 +337,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
-- 
2.43.0

[PATCH 6.7 179/713] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL board

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit 008820524844326ffb3123cebceba1960c0ad0dc ]

Some signals have external pullup resistors on the board and don't need
the internal ones to be enabled. Due to silicon errata ERR050080 let's
disable the internal pull resistors whererever possible and prevent
any unwanted behavior in case they wear out.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/freescale/imx8mm-kontron-bl.dts   | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index ee93db11c0d06..aab8e24216501 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -316,40 +316,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
-- 
2.43.0

[PATCH 6.7 180/713] arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module

[Sasha Levin]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit 8d0f39b7d04d864e89b84063b124fd10aa4b8809 ]

The level of the interrupt signal is active low instead. Fix this.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 3e7db968f7e64..60abcb636cedf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -210,7 +210,7 @@ rv3028: rtc@52 {
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 		trickle-diode-disable;
 	};
 };
-- 
2.43.0

[PATCH 6.7 181/713] arm64: dts: imx8qm: Align edma3 power-domains resources indentation

[Sasha Levin]

From: Frank Li <Frank.Li@nxp.com>

[ Upstream commit 7edee2b297e5a4f805e5b945c0c0e6f4f8f719b5 ]

<&pd IMX_SC_R_DMA_1_CH*> is now properly aligned with the previous line
for improved code readability.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: 5136ea6b109d ("arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 8439dd6b39353..13a3531873401 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -98,13 +98,13 @@ &edma2 {
 
 &edma3 {
 	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
-		     <&pd IMX_SC_R_DMA_1_CH1>,
-		     <&pd IMX_SC_R_DMA_1_CH2>,
-		     <&pd IMX_SC_R_DMA_1_CH3>,
-		     <&pd IMX_SC_R_DMA_1_CH4>,
-		     <&pd IMX_SC_R_DMA_1_CH5>,
-		     <&pd IMX_SC_R_DMA_1_CH6>,
-		     <&pd IMX_SC_R_DMA_1_CH7>;
+			<&pd IMX_SC_R_DMA_1_CH1>,
+			<&pd IMX_SC_R_DMA_1_CH2>,
+			<&pd IMX_SC_R_DMA_1_CH3>,
+			<&pd IMX_SC_R_DMA_1_CH4>,
+			<&pd IMX_SC_R_DMA_1_CH5>,
+			<&pd IMX_SC_R_DMA_1_CH6>,
+			<&pd IMX_SC_R_DMA_1_CH7>;
 };
 
 &flexcan1 {
-- 
2.43.0

[PATCH 6.7 182/713] arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers

[Sasha Levin]

From: Frank Li <Frank.Li@nxp.com>

[ Upstream commit 5136ea6b109de66b1327a3069f88ad8f5efb37b2 ]

It is eDMA1 at QM, which have the same register with eDMA3 at qxp.

The below commit fix panic problem.
commit b37e75bddc35 ("arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup")

This fixes the IRQ and DMA channel numbers. While QM eDMA1 technically has
32 channels, only 10 channels are likely used for I2C. The exact IRQ
numbers for the remaining channels were unclear in the reference manual.

Fixes: e4d7a330fb7a ("arm64: dts: imx8: add edma[0..3]")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index 13a3531873401..459ba2b9b7f31 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -96,7 +96,20 @@ &edma2 {
 	status = "okay";
 };
 
+/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */
 &edma3 {
+	reg = <0x5a9f0000 0x210000>;
+	dma-channels = <10>;
+	interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
 			<&pd IMX_SC_R_DMA_1_CH1>,
 			<&pd IMX_SC_R_DMA_1_CH2>,
@@ -104,7 +117,9 @@ &edma3 {
 			<&pd IMX_SC_R_DMA_1_CH4>,
 			<&pd IMX_SC_R_DMA_1_CH5>,
 			<&pd IMX_SC_R_DMA_1_CH6>,
-			<&pd IMX_SC_R_DMA_1_CH7>;
+			<&pd IMX_SC_R_DMA_1_CH7>,
+			<&pd IMX_SC_R_DMA_1_CH8>,
+			<&pd IMX_SC_R_DMA_1_CH9>;
 };
 
 &flexcan1 {
-- 
2.43.0

[PATCH 6.7 183/713] libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim API

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 93ee1eb85e28d1e35bb059c1f5965d65d5fc83c2 ]

LIBBPF_API annotation seems missing on libbpf_set_memlock_rlim API, so
add it to make this API callable from libbpf's shared library version.

Fixes: e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
Fixes: ab9a5a05dc48 ("libbpf: fix up few libbpf.map problems")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index d0f53772bdc02..dad7917903d19 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -35,7 +35,7 @@
 extern "C" {
 #endif
 
-int libbpf_set_memlock_rlim(size_t memlock_bytes);
+LIBBPF_API int libbpf_set_memlock_rlim(size_t memlock_bytes);
 
 struct bpf_map_create_opts {
 	size_t sz; /* size of this struct for forward/backward compatibility */
-- 
2.43.0

[PATCH 6.7 184/713] wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 24355fcb0d4cbcb6ddda262596558e8cfba70f11 ]

The ath9k_wmi_event_tasklet() used in ath9k_htc assumes that all the data
structures have been fully initialised by the time it runs. However, because of
the order in which things are initialised, this is not guaranteed to be the
case, because the device is exposed to the USB subsystem before the ath9k driver
initialisation is completed.

We already committed a partial fix for this in commit:
8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")

However, that commit only aborted the WMI_TXSTATUS_EVENTID command in the event
tasklet, pairing it with an "initialisation complete" bit in the TX struct. It
seems syzbot managed to trigger the race for one of the other commands as well,
so let's just move the existing synchronisation bit to cover the whole
tasklet (setting it at the end of ath9k_htc_probe_device() instead of inside
ath9k_tx_init()).

Link: https://lore.kernel.org/r/ed1d2c66-1193-4c81-9542-d514c29ba8b8.bugreport@ubisectech.com
Fixes: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240126140218.1033443-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |  4 ++++
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c |  4 ----
 drivers/net/wireless/ath/ath9k/wmi.c          | 10 ++++++----
 4 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 237f4ec2cffd7..6c33e898b3000 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -306,7 +306,6 @@ struct ath9k_htc_tx {
 	DECLARE_BITMAP(tx_slot, MAX_TX_BUF_NUM);
 	struct timer_list cleanup_timer;
 	spinlock_t tx_lock;
-	bool initialized;
 };
 
 struct ath9k_htc_tx_ctl {
@@ -515,6 +514,7 @@ struct ath9k_htc_priv {
 	unsigned long ps_usecount;
 	bool ps_enabled;
 	bool ps_idle;
+	bool initialized;
 
 #ifdef CONFIG_MAC80211_LEDS
 	enum led_brightness brightness;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index dae3d9c7b6408..fc339079ee8c9 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -966,6 +966,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 
 	htc_handle->drv_priv = priv;
 
+	/* Allow ath9k_wmi_event_tasklet() to operate. */
+	smp_wmb();
+	priv->initialized = true;
+
 	return 0;
 
 err_init:
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index efcaeccb055aa..ce9c04e418b8d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -815,10 +815,6 @@ int ath9k_tx_init(struct ath9k_htc_priv *priv)
 	skb_queue_head_init(&priv->tx.data_vo_queue);
 	skb_queue_head_init(&priv->tx.tx_failed);
 
-	/* Allow ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) to operate. */
-	smp_wmb();
-	priv->tx.initialized = true;
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index 1476b42b52a91..805ad31edba2b 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -155,6 +155,12 @@ void ath9k_wmi_event_tasklet(struct tasklet_struct *t)
 		}
 		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
+		/* Check if ath9k_htc_probe_device() completed. */
+		if (!data_race(priv->initialized)) {
+			kfree_skb(skb);
+			continue;
+		}
+
 		hdr = (struct wmi_cmd_hdr *) skb->data;
 		cmd_id = be16_to_cpu(hdr->command_id);
 		wmi_event = skb_pull(skb, sizeof(struct wmi_cmd_hdr));
@@ -169,10 +175,6 @@ void ath9k_wmi_event_tasklet(struct tasklet_struct *t)
 					     &wmi->drv_priv->fatal_work);
 			break;
 		case WMI_TXSTATUS_EVENTID:
-			/* Check if ath9k_tx_init() completed. */
-			if (!data_race(priv->tx.initialized))
-				break;
-
 			spin_lock_bh(&priv->tx.tx_lock);
 			if (priv->tx.flags & ATH9K_HTC_OP_TX_DRAIN) {
 				spin_unlock_bh(&priv->tx.tx_lock);
-- 
2.43.0

[PATCH 6.7 185/713] wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID

[Sasha Levin]

From: Wen Gong <quic_wgong@quicinc.com>

[ Upstream commit 413e20e82ee78f142cb5194fd317db514f012602 ]

Currently when connecting to an AP with 11AX-HE phy mode, host sends
WMI_VDEV_PARAM_SET_HEMU_MODE parameter to firmware after
WMI_PEER_ASSOC_CMDID command. This results in TXBF not working, because
firmware calculates TXBF values while handling WMI_PEER_ASSOC_CMDID,
however at that time WMI_VDEV_PARAM_SET_HEMU_MODE has not been sent yet.
See below log:

AP sends "VHT/HE/EHT NDP Announcement" to station, and station sends
"Action no Ack" of category code HE to AP, the "Nc Index" and
"Codebook Information" are wrong:

Issued action:
IEEE 802.11 Action No Ack, Flags: ........
IEEE 802.11 wireless LAN
    Fixed parameters
        Category code: HE (30)
        HE Action: HE Compressed Beamforming And CQI (0)
            Total length: 152
            HE MIMO Control: 0x0004008018
                .... .... .... .... .... .... .... .... .... .000 = Nc Index: 1 Column (0)
                .... .... .... .... .... .... .... ..0. .... .... = Codebook Information: 0

Change to send WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID,
then firmware will calculate the TXBF values with valid parameters
instead of empty values. TXBF works well and throughput performance is
improved from 80 Mbps to 130 Mbps with this patch.

Good action after this patch:
IEEE 802.11 Action No Ack, Flags: ........
IEEE 802.11 wireless LAN
    Fixed parameters
        Category code: HE (30)
        HE Action: HE Compressed Beamforming And CQI (0)
            Total length: 409
            HE MIMO Control: 0x0004008219
                .... .... .... .... .... .... .... .... .... .001 = Nc Index: 2 Columns (1)
                .... .... .... .... .... .... .... ..1. .... .... = Codebook Information: 1

This change applies to all chipsets.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240131021832.17298-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 71c6dab1aedba..e09b21a82c20f 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3026,7 +3026,14 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 
 	rcu_read_unlock();
 
+	if (!ath11k_mac_vif_recalc_sta_he_txbf(ar, vif, &he_cap)) {
+		ath11k_warn(ar->ab, "failed to recalc he txbf for vdev %i on bss %pM\n",
+			    arvif->vdev_id, bss_conf->bssid);
+		return;
+	}
+
 	peer_arg.is_assoc = true;
+
 	ret = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
 	if (ret) {
 		ath11k_warn(ar->ab, "failed to run peer assoc for %pM vdev %i: %d\n",
@@ -3049,12 +3056,6 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 		return;
 	}
 
-	if (!ath11k_mac_vif_recalc_sta_he_txbf(ar, vif, &he_cap)) {
-		ath11k_warn(ar->ab, "failed to recalc he txbf for vdev %i on bss %pM\n",
-			    arvif->vdev_id, bss_conf->bssid);
-		return;
-	}
-
 	WARN_ON(arvif->is_up);
 
 	arvif->aid = vif->cfg.aid;
-- 
2.43.0

[PATCH 6.7 186/713] wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrights

[Sasha Levin]

From: Jeff Johnson <quic_jjohnson@quicinc.com>

[ Upstream commit 05205b9576615fca5da91cdae5a3f89f2ad32703 ]

Update the copyright for all ath12k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2023.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
Stable-dep-of: 902700d55d4a ("wifi: ath12k: fix fetching MCBC flag for QCN9274")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dbring.c  | 2 +-
 drivers/net/wireless/ath/ath12k/debug.c   | 2 +-
 drivers/net/wireless/ath/ath12k/dp_tx.c   | 2 +-
 drivers/net/wireless/ath/ath12k/hal.c     | 2 +-
 drivers/net/wireless/ath/ath12k/hal.h     | 2 +-
 drivers/net/wireless/ath/ath12k/hal_rx.c  | 2 +-
 drivers/net/wireless/ath/ath12k/hif.h     | 2 +-
 drivers/net/wireless/ath/ath12k/hw.c      | 2 +-
 drivers/net/wireless/ath/ath12k/hw.h      | 2 +-
 drivers/net/wireless/ath/ath12k/mac.c     | 2 +-
 drivers/net/wireless/ath/ath12k/mac.h     | 2 +-
 drivers/net/wireless/ath/ath12k/mhi.c     | 2 +-
 drivers/net/wireless/ath/ath12k/pci.c     | 2 +-
 drivers/net/wireless/ath/ath12k/pci.h     | 2 +-
 drivers/net/wireless/ath/ath12k/peer.h    | 2 +-
 drivers/net/wireless/ath/ath12k/qmi.c     | 2 +-
 drivers/net/wireless/ath/ath12k/qmi.h     | 2 +-
 drivers/net/wireless/ath/ath12k/reg.c     | 2 +-
 drivers/net/wireless/ath/ath12k/reg.h     | 2 +-
 drivers/net/wireless/ath/ath12k/rx_desc.h | 2 +-
 drivers/net/wireless/ath/ath12k/wmi.c     | 2 +-
 21 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/dbring.c b/drivers/net/wireless/ath/ath12k/dbring.c
index 8fbf868e6f7ec..788160c84c686 100644
--- a/drivers/net/wireless/ath/ath12k/dbring.c
+++ b/drivers/net/wireless/ath/ath12k/dbring.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "core.h"
diff --git a/drivers/net/wireless/ath/ath12k/debug.c b/drivers/net/wireless/ath/ath12k/debug.c
index 45d33279e665d..fe5a732ba9ec9 100644
--- a/drivers/net/wireless/ath/ath12k/debug.c
+++ b/drivers/net/wireless/ath/ath12k/debug.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/vmalloc.h>
diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index 492ca6ce67140..62f9cdbb811c0 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "core.h"
diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c
index b896dfe66dad3..a489369d80687 100644
--- a/drivers/net/wireless/ath/ath12k/hal.c
+++ b/drivers/net/wireless/ath/ath12k/hal.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/dma-mapping.h>
 #include "hal_tx.h"
diff --git a/drivers/net/wireless/ath/ath12k/hal.h b/drivers/net/wireless/ath/ath12k/hal.h
index 66035a787c728..fc47e7e6b498a 100644
--- a/drivers/net/wireless/ath/ath12k/hal.h
+++ b/drivers/net/wireless/ath/ath12k/hal.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_HAL_H
diff --git a/drivers/net/wireless/ath/ath12k/hal_rx.c b/drivers/net/wireless/ath/ath12k/hal_rx.c
index f6afbd8196bf5..4f25eb9f77453 100644
--- a/drivers/net/wireless/ath/ath12k/hal_rx.c
+++ b/drivers/net/wireless/ath/ath12k/hal_rx.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include "debug.h"
diff --git a/drivers/net/wireless/ath/ath12k/hif.h b/drivers/net/wireless/ath/ath12k/hif.h
index 4095fd82b1b3f..c653ca1f59b22 100644
--- a/drivers/net/wireless/ath/ath12k/hif.h
+++ b/drivers/net/wireless/ath/ath12k/hif.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_HIF_H
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index b55cf33e37bd8..de60d988d8608 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/types.h>
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index 2d6427cf41a4d..d2622bfef9422 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_HW_H
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 075ca1c34986b..54693e247cb31 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <net/mac80211.h>
diff --git a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
index 59b4e8f5eee05..7d71ae1aba45e 100644
--- a/drivers/net/wireless/ath/ath12k/mac.h
+++ b/drivers/net/wireless/ath/ath12k/mac.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_MAC_H
diff --git a/drivers/net/wireless/ath/ath12k/mhi.c b/drivers/net/wireless/ath/ath12k/mhi.c
index 39e640293cdc0..27eb38b2b1bd2 100644
--- a/drivers/net/wireless/ath/ath12k/mhi.c
+++ b/drivers/net/wireless/ath/ath12k/mhi.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/msi.h>
diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 3006cd3fbe119..a6a5f9bcffbd6 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/wireless/ath/ath12k/pci.h b/drivers/net/wireless/ath/ath12k/pci.h
index 0f24fd9395cd9..9a17a7dcdd6a6 100644
--- a/drivers/net/wireless/ath/ath12k/pci.h
+++ b/drivers/net/wireless/ath/ath12k/pci.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #ifndef ATH12K_PCI_H
 #define ATH12K_PCI_H
diff --git a/drivers/net/wireless/ath/ath12k/peer.h b/drivers/net/wireless/ath/ath12k/peer.h
index c6edb24cbedd8..7b3500b5c8c20 100644
--- a/drivers/net/wireless/ath/ath12k/peer.h
+++ b/drivers/net/wireless/ath/ath12k/peer.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_PEER_H
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index f6e949c618d0a..77a132f6bbd1b 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/elf.h>
diff --git a/drivers/net/wireless/ath/ath12k/qmi.h b/drivers/net/wireless/ath/ath12k/qmi.h
index e20d6511d1ca0..e25bbaa125e83 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.h
+++ b/drivers/net/wireless/ath/ath12k/qmi.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_QMI_H
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index fcb76f92a7dec..1dac8439802ad 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/rtnetlink.h>
 #include "core.h"
diff --git a/drivers/net/wireless/ath/ath12k/reg.h b/drivers/net/wireless/ath/ath12k/reg.h
index 35569f03042d3..d4a0776e10341 100644
--- a/drivers/net/wireless/ath/ath12k/reg.h
+++ b/drivers/net/wireless/ath/ath12k/reg.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_REG_H
diff --git a/drivers/net/wireless/ath/ath12k/rx_desc.h b/drivers/net/wireless/ath/ath12k/rx_desc.h
index c4058abc516ee..55f20c446ca9c 100644
--- a/drivers/net/wireless/ath/ath12k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath12k/rx_desc.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #ifndef ATH12K_RX_DESC_H
 #define ATH12K_RX_DESC_H
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 0e5bf5ce8d4c3..11cc3005c0f98 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/skbuff.h>
 #include <linux/ctype.h>
-- 
2.43.0

[PATCH 6.7 187/713] wifi: ath12k: fix fetching MCBC flag for QCN9274

[Sasha Levin]

From: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>

[ Upstream commit 902700d55d4a4522bb3eb4ef94f752a19c42230a ]

In QCN9274, RX packet's multicast and broadcast(MCBC) flag is fetched
from RX descriptor's msdu_end info5 member but it is not correct
for QCN9274. Due to this with encryption, ARP request packet is wrongly
marked as MCBC packet and it is sent to mac80211 without setting
RX_FLAG_PN_VALIDATED & RX_FLAG_DECRYPTED flag. This results in packet
getting dropped in mac80211. Hence ping initiated from station to AP
fails.

Fix this by fetching correct MCBC flag in case of QCN9274.
For QC9274 MCBC flag should be fetched from RX descriptor's mpdu_start
info6 member.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: 8f04852e90cb ("wifi: ath12k: Use msdu_end to check MCBC")
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240129065724.2310207-5-quic_rajkbhag@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/hal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c
index a489369d80687..1bdab8604db94 100644
--- a/drivers/net/wireless/ath/ath12k/hal.c
+++ b/drivers/net/wireless/ath/ath12k/hal.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/dma-mapping.h>
 #include "hal_tx.h"
@@ -449,8 +449,8 @@ static u8 *ath12k_hw_qcn9274_rx_desc_mpdu_start_addr2(struct hal_rx_desc *desc)
 
 static bool ath12k_hw_qcn9274_rx_desc_is_da_mcbc(struct hal_rx_desc *desc)
 {
-	return __le16_to_cpu(desc->u.qcn9274.msdu_end.info5) &
-	       RX_MSDU_END_INFO5_DA_IS_MCBC;
+	return __le32_to_cpu(desc->u.qcn9274.mpdu_start.info6) &
+	       RX_MPDU_START_INFO6_MCAST_BCAST;
 }
 
 static void ath12k_hw_qcn9274_rx_desc_get_dot11_hdr(struct hal_rx_desc *desc,
-- 
2.43.0

[PATCH 6.7 188/713] wifi: iwlwifi: mvm: report beacon protection failures

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 91380f768d7f6e3d003755defa792e9a00a1444a ]

Andrei reports that we just silently drop beacons after we
report the key counters, but never report to userspace, so
wpa_supplicant cannot send the WNM action frame. Fix that.

Fixes: b1fdc2505abc ("iwlwifi: mvm: advertise BIGTK client support if available")
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.7d855442cdce.Iba90b26f893dc8c49bfb8be65373cd0a138af12c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 26 +++++++++++--------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index af15d470c69bd..7bf2a5947e5e9 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -282,6 +282,7 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 				u32 status,
 				struct ieee80211_rx_status *stats)
 {
+	struct wireless_dev *wdev;
 	struct iwl_mvm_sta *mvmsta;
 	struct iwl_mvm_vif *mvmvif;
 	u8 keyid;
@@ -303,9 +304,15 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 	if (!ieee80211_is_beacon(hdr->frame_control))
 		return 0;
 
+	if (!sta)
+		return -1;
+
+	mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif);
+
 	/* key mismatch - will also report !MIC_OK but we shouldn't count it */
 	if (!(status & IWL_RX_MPDU_STATUS_KEY_VALID))
-		return -1;
+		goto report;
 
 	/* good cases */
 	if (likely(status & IWL_RX_MPDU_STATUS_MIC_OK &&
@@ -314,13 +321,6 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 		return 0;
 	}
 
-	if (!sta)
-		return -1;
-
-	mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
-	mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif);
-
 	/*
 	 * both keys will have the same cipher and MIC length, use
 	 * whichever one is available
@@ -329,11 +329,11 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 	if (!key) {
 		key = rcu_dereference(mvmvif->bcn_prot.keys[1]);
 		if (!key)
-			return -1;
+			goto report;
 	}
 
 	if (len < key->icv_len + IEEE80211_GMAC_PN_LEN + 2)
-		return -1;
+		goto report;
 
 	/* get the real key ID */
 	keyid = frame[len - key->icv_len - IEEE80211_GMAC_PN_LEN - 2];
@@ -347,7 +347,7 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 			return -1;
 		key = rcu_dereference(mvmvif->bcn_prot.keys[keyid - 6]);
 		if (!key)
-			return -1;
+			goto report;
 	}
 
 	/* Report status to mac80211 */
@@ -355,6 +355,10 @@ static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 		ieee80211_key_mic_failure(key);
 	else if (status & IWL_RX_MPDU_STATUS_REPLAY_ERROR)
 		ieee80211_key_replay(key);
+report:
+	wdev = ieee80211_vif_to_wdev(mvmsta->vif);
+	if (wdev->netdev)
+		cfg80211_rx_unprot_mlme_mgmt(wdev->netdev, (void *)hdr, len);
 
 	return -1;
 }
-- 
2.43.0

[PATCH 6.7 189/713] wifi: iwlwifi: dbg-tlv: ensure NUL termination

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ea1d166fae14e05d49ffb0ea9fcd4658f8d3dcea ]

The iwl_fw_ini_debug_info_tlv is used as a string, so we must
ensure the string is terminated correctly before using it.

Fixes: a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.be15e858ee89.Ibff93429cf999eafc7b26f3eef4c055dc84984a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
index 9160d81a871ee..55d2ed13a9c09 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
@@ -103,6 +103,12 @@ static int iwl_dbg_tlv_alloc_debug_info(struct iwl_trans *trans,
 	if (le32_to_cpu(tlv->length) != sizeof(*debug_info))
 		return -EINVAL;
 
+	/* we use this as a string, ensure input was NUL terminated */
+	if (strnlen(debug_info->debug_cfg_name,
+		    sizeof(debug_info->debug_cfg_name)) ==
+			sizeof(debug_info->debug_cfg_name))
+		return -EINVAL;
+
 	IWL_DEBUG_FW(trans, "WRT: Loading debug cfg: %s\n",
 		     debug_info->debug_cfg_name);
 
-- 
2.43.0

[PATCH 6.7 190/713] wifi: iwlwifi: acpi: fix WPFC reading

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 296f3e926716ded8dc29e349d2b042b362f96515 ]

The code reading the WPFC table needs to take into account
the domain type (first element in the package), shouldn't
leak the memory if it fails, and has a bad comment. Fix all
these issues.

Fixes: c4c954547755 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman Gregory <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.2afeb476b62d.I200568dc42a277e21c12be99d5aaa39b009d45da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 10 +++++-----
 drivers/net/wireless/intel/iwlwifi/fw/acpi.h |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
index dcc4810cb3247..f6ee5afb3320e 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
@@ -1296,7 +1296,6 @@ void iwl_acpi_get_phy_filters(struct iwl_fw_runtime *fwrt,
 	if (IS_ERR(data))
 		return;
 
-	/* try to read wtas table revision 1 or revision 0*/
 	wifi_pkg = iwl_acpi_get_wifi_pkg(fwrt->dev, data,
 					 ACPI_WPFC_WIFI_DATA_SIZE,
 					 &tbl_rev);
@@ -1306,13 +1305,14 @@ void iwl_acpi_get_phy_filters(struct iwl_fw_runtime *fwrt,
 	if (tbl_rev != 0)
 		goto out_free;
 
-	BUILD_BUG_ON(ARRAY_SIZE(filters->filter_cfg_chains) != ACPI_WPFC_WIFI_DATA_SIZE);
+	BUILD_BUG_ON(ARRAY_SIZE(filters->filter_cfg_chains) !=
+		     ACPI_WPFC_WIFI_DATA_SIZE - 1);
 
 	for (i = 0; i < ARRAY_SIZE(filters->filter_cfg_chains); i++) {
-		if (wifi_pkg->package.elements[i].type != ACPI_TYPE_INTEGER)
-			return;
+		if (wifi_pkg->package.elements[i + 1].type != ACPI_TYPE_INTEGER)
+			goto out_free;
 		tmp.filter_cfg_chains[i] =
-			cpu_to_le32(wifi_pkg->package.elements[i].integer.value);
+			cpu_to_le32(wifi_pkg->package.elements[i + 1].integer.value);
 	}
 
 	IWL_DEBUG_RADIO(fwrt, "Loaded WPFC filter config from ACPI\n");
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.h b/drivers/net/wireless/intel/iwlwifi/fw/acpi.h
index e9277f6f35821..39106ccb4b9b6 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.h
@@ -56,7 +56,7 @@
 #define ACPI_EWRD_WIFI_DATA_SIZE_REV2	((ACPI_SAR_PROFILE_NUM - 1) * \
 					 ACPI_SAR_NUM_CHAINS_REV2 * \
 					 ACPI_SAR_NUM_SUB_BANDS_REV2 + 3)
-#define ACPI_WPFC_WIFI_DATA_SIZE	4 /* 4 filter config words */
+#define ACPI_WPFC_WIFI_DATA_SIZE	5 /* domain and 4 filter config words */
 
 /* revision 0 and 1 are identical, except for the semantics in the FW */
 #define ACPI_GEO_NUM_BANDS_REV0		2
-- 
2.43.0

[PATCH 6.7 191/713] wifi: iwlwifi: mvm: initialize rates in FW earlier

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d3b2c6c65bfd3b9616084e91bd0d402964ea7cef ]

When connecting to an AP, we currently initialize the rate
control only after associating. Since we now use firmware
to assign rates to auth/assoc frames rather than using the
data in the station and the firmware doesn't know, they're
transmitted using low mandatory rates. However, if the AP
advertised only higher supported rates we want to use them
to be nicer (it still must receive mandatory rates though),
so send the information to the firmware earlier to have it
know about it and be able to use it.

Fixes: 499d02790495 ("wifi: iwlwifi: Use FW rate for non-data frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.ed7ab1c859c2.I4b4d4fc3905c8d8470fc0fee4648f25c950c9bb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 350dc6b8a3302..b87173bb61f24 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3684,6 +3684,19 @@ iwl_mvm_sta_state_notexist_to_none(struct iwl_mvm *mvm,
 	if (vif->type == NL80211_IFTYPE_STATION && !sta->tdls)
 		mvmvif->ap_sta = sta;
 
+	/*
+	 * Initialize the rates here already - this really tells
+	 * the firmware only what the supported legacy rates are
+	 * (may be) since it's initialized already from what the
+	 * AP advertised in the beacon/probe response. This will
+	 * allow the firmware to send auth/assoc frames with one
+	 * of the supported rates already, rather than having to
+	 * use a mandatory rate.
+	 * If we're the AP, we'll just assume mandatory rates at
+	 * this point, but we know nothing about the STA anyway.
+	 */
+	iwl_mvm_rs_rate_init_all_links(mvm, vif, sta);
+
 	return 0;
 }
 
-- 
2.43.0

[PATCH 6.7 192/713] wifi: iwlwifi: fix EWRD table validity check

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit c8d8f3911135921ace8e939ea0956b55f74bf8a0 ]

EWRD ACPI table contains up to 3 additional sar profiles.
According to the BIOS spec, the table contains a n_profile
variable indicating how many additional profiles exist in the
table.
Currently we check that n_profiles is not <= 0.
But according to the BIOS spec, 0 is a valid value,
and it can't be < 0 anyway because we receive that from ACPI as
an unsigned integer.

Fixes: 39c1a9728f93 ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240129211905.448ea2f40814.Iffd2aadf8e8693e6cb599bee0406a800a0c1e081@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
index f6ee5afb3320e..e161b44539069 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
@@ -767,7 +767,7 @@ int iwl_sar_get_ewrd_table(struct iwl_fw_runtime *fwrt)
 	 * from index 1, so the maximum value allowed here is
 	 * ACPI_SAR_PROFILES_NUM - 1.
 	 */
-	if (n_profiles <= 0 || n_profiles >= ACPI_SAR_PROFILE_NUM) {
+	if (n_profiles >= ACPI_SAR_PROFILE_NUM) {
 		ret = -EINVAL;
 		goto out_free;
 	}
-- 
2.43.0

[PATCH 6.7 193/713] wifi: iwlwifi: mvm: d3: fix IPN byte order

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 0c769cb6b9f364423c255f117774c9ecd5bf23ea ]

The IPN is reported by the firmware in 6 bytes little endian,
but mac80211 expects big endian so it can do memcmp() on it.
We used to store this as a u64 which was filled in the right
way, but never used. When implementing that it's used, we
changed it to just be 6 bytes, but lost the conversion. Add
it back.

Fixes: 04f78e242fff ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.138ed8a698e3.I1b66c386e45b5392696424ec636474bff86fd5ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index a640860ab7acd..626e9b94a6624 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -2207,7 +2207,10 @@ static void iwl_mvm_convert_gtk_v3(struct iwl_wowlan_status_data *status,
 static void iwl_mvm_convert_igtk(struct iwl_wowlan_status_data *status,
 				 struct iwl_wowlan_igtk_status *data)
 {
+	int i;
+
 	BUILD_BUG_ON(sizeof(status->igtk.key) < sizeof(data->key));
+	BUILD_BUG_ON(sizeof(status->igtk.ipn) != sizeof(data->ipn));
 
 	if (!data->key_len)
 		return;
@@ -2219,7 +2222,10 @@ static void iwl_mvm_convert_igtk(struct iwl_wowlan_status_data *status,
 		+ WOWLAN_IGTK_MIN_INDEX;
 
 	memcpy(status->igtk.key, data->key, sizeof(data->key));
-	memcpy(status->igtk.ipn, data->ipn, sizeof(data->ipn));
+
+	/* mac80211 expects big endian for memcmp() to work, convert */
+	for (i = 0; i < sizeof(data->ipn); i++)
+		status->igtk.ipn[i] = data->ipn[sizeof(data->ipn) - i - 1];
 }
 
 static void iwl_mvm_convert_bigtk(struct iwl_wowlan_status_data *status,
-- 
2.43.0

[PATCH 6.7 194/713] wifi: iwlwifi: always have 'uats_enabled'

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit f639602a58e7564dd091c7c0793f61042bad9bb6 ]

We check this in code that'd be complicated to put under
ifdef (CONFIG_ACPI), so just always have 'uats_enabled'.

Fixes: 4a9bb5b4d949 ("wifi: iwlwifi: fw: Add support for UATS table in UHB")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.bdc5fb20f00a.I902d801d79873c5c9cd51cef8e8226e2acefe88d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/runtime.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/runtime.h b/drivers/net/wireless/intel/iwlwifi/fw/runtime.h
index 357727774db90..baabb8e321f8d 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/runtime.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/runtime.h
@@ -173,9 +173,9 @@ struct iwl_fw_runtime {
 	struct iwl_sar_offset_mapping_cmd sgom_table;
 	bool sgom_enabled;
 	u8 reduced_power_flags;
-	bool uats_enabled;
 	struct iwl_uats_table_cmd uats_table;
 #endif
+	bool uats_enabled;
 };
 
 void iwl_fw_runtime_init(struct iwl_fw_runtime *fwrt, struct iwl_trans *trans,
-- 
2.43.0

[PATCH 6.7 195/713] wifi: iwlwifi: mvm: fix the TLC command after ADD_STA

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 0fcdf55fced7121c43fa576433986f1c04115b73 ]

ADD_STA resets the link quality data inside the firmware. This is not
supposed to happen and has been fixed for newer devices. For older
devices (AX201 and down), this makes us send frames with rates that are
not in the TLC table.

Fixes: 5a86dcb4a908 ("wifi: iwlwifi: mvm: update station's MFP flag after association")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.1deca7eaff14.I597abd7aab36fdab4aa8311a48c98a3d5bd433ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index b87173bb61f24..68c3d54f587cc 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3795,13 +3795,17 @@ iwl_mvm_sta_state_assoc_to_authorized(struct iwl_mvm *mvm,
 
 	mvm_sta->authorized = true;
 
-	iwl_mvm_rs_rate_init_all_links(mvm, vif, sta);
-
 	/* MFP is set by default before the station is authorized.
 	 * Clear it here in case it's not used.
 	 */
-	if (!sta->mfp)
-		return callbacks->update_sta(mvm, vif, sta);
+	if (!sta->mfp) {
+		int ret = callbacks->update_sta(mvm, vif, sta);
+
+		if (ret)
+			return ret;
+	}
+
+	iwl_mvm_rs_rate_init_all_links(mvm, vif, sta);
 
 	return 0;
 }
-- 
2.43.0

[PATCH 6.7 196/713] wifi: iwlwifi: read BIOS PNVM only for non-Intel SKU

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit c868a189ecfe8cc0b3173c2eaa7f0b659326c151 ]

The driver is supposed to read the PNVM from BIOS only for non-Intel
SKUs. For Intel SKUs the OEM ID will be 0.
Read BIOS PNVM only when a non-Intel SKU is indicated.

Fixes: b99e32cbfdf6 ("wifi: iwlwifi: Take loading and setting of pnvm image out of parsing part")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.3625cf1223d3.Ieffda5f506713b1c979388dd7a0e1c1a0145cfca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/pnvm.c | 30 ++++++++++++--------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c b/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
index 650e4bde9c17b..56ee0ceed78ab 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
@@ -255,21 +255,27 @@ static u8 *iwl_get_pnvm_image(struct iwl_trans *trans_p, size_t *len)
 	struct pnvm_sku_package *package;
 	u8 *image = NULL;
 
-	/* First attempt to get the PNVM from BIOS */
-	package = iwl_uefi_get_pnvm(trans_p, len);
-	if (!IS_ERR_OR_NULL(package)) {
-		if (*len >= sizeof(*package)) {
-			/* we need only the data */
-			*len -= sizeof(*package);
-			image = kmemdup(package->data, *len, GFP_KERNEL);
+	/* Get PNVM from BIOS for non-Intel SKU */
+	if (trans_p->sku_id[2]) {
+		package = iwl_uefi_get_pnvm(trans_p, len);
+		if (!IS_ERR_OR_NULL(package)) {
+			if (*len >= sizeof(*package)) {
+				/* we need only the data */
+				*len -= sizeof(*package);
+				image = kmemdup(package->data,
+						*len, GFP_KERNEL);
+			}
+			/*
+			 * free package regardless of whether kmemdup
+			 * succeeded
+			 */
+			kfree(package);
+			if (image)
+				return image;
 		}
-		/* free package regardless of whether kmemdup succeeded */
-		kfree(package);
-		if (image)
-			return image;
 	}
 
-	/* If it's not available, try from the filesystem */
+	/* If it's not available, or for Intel SKU, try from the filesystem */
 	if (iwl_pnvm_get_from_fs(trans_p, &image, len))
 		return NULL;
 	return image;
-- 
2.43.0

[PATCH 6.7 197/713] gpio: vf610: allow disabling the vf610 driver

[Sasha Levin]

From: Martin Kaiser <martin@kaiser.cx>

[ Upstream commit f57595788244a838deec2d3be375291327cbc035 ]

The vf610 gpio driver is enabled by default for all i.MX machines,
without any option to disable it in a board-specific config file.

Most i.MX chipsets have no hardware for this driver. Change the default
to enable GPIO_VF610 for SOC_VF610 and disable it otherwise.

Add a text description after the bool type, this makes the driver
selectable by make config etc.

Fixes: 30a35c07d9e9 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b3a133ed31ee5..41b51536bd867 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -691,7 +691,8 @@ config GPIO_UNIPHIER
 	  Say yes here to support UniPhier GPIOs.
 
 config GPIO_VF610
-	def_bool y
+	bool "VF610 GPIO support"
+	default y if SOC_VF610
 	depends on ARCH_MXC
 	select GPIOLIB_IRQCHIP
 	help
-- 
2.43.0

[PATCH 6.7 198/713] selftests/bpf: trace_helpers.c: do not use poisoned type

[Sasha Levin]

From: Shung-Hsi Yu <shung-hsi.yu@suse.com>

[ Upstream commit a68b50f47bec8bd6a33b07b7e1562db2553981a7 ]

After commit c698eaebdf47 ("selftests/bpf: trace_helpers.c: Optimize
kallsyms cache") trace_helpers.c now includes libbpf_internal.h, and
thus can no longer use the u32 type (among others) since they are poison
in libbpf_internal.h. Replace u32 with __u32 to fix the following error
when building trace_helpers.c on powerpc:

  error: attempt to use poisoned "u32"

Fixes: c698eaebdf47 ("selftests/bpf: trace_helpers.c: Optimize kallsyms cache")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240202095559.12900-1-shung-hsi.yu@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/trace_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c
index 4faa898ff7fc4..27fd7ed3e4b0c 100644
--- a/tools/testing/selftests/bpf/trace_helpers.c
+++ b/tools/testing/selftests/bpf/trace_helpers.c
@@ -271,7 +271,7 @@ ssize_t get_uprobe_offset(const void *addr)
 	 * addi  r2,r2,XXXX
 	 */
 	{
-		const u32 *insn = (const u32 *)(uintptr_t)addr;
+		const __u32 *insn = (const __u32 *)(uintptr_t)addr;
 
 		if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) ||
 		     ((*insn & OP_RT_RA_MASK) == LIS_R2)) &&
-- 
2.43.0

[PATCH 6.7 199/713] arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS

[Sasha Levin]

From: Tim Harvey <tharvey@gateworks.com>

[ Upstream commit ec2cb52fcfef5d58574f2cfbc9a99ffc20ae5a9d ]

The GW71xx does not have a gpio controlled vbus regulator but it does
require some pinctrl. Remove the regulator and move the valid pinctrl
into the usbotg1 node.

Fixes: bd306fdb4e60 ("arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/freescale/imx8mm-venice-gw71xx.dtsi   | 29 ++++++-------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 6425773f68e0a..bbbaf2165ea28 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,17 +47,6 @@ pps {
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
 /* off-board header */
@@ -144,9 +133,10 @@ &uart3 {
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -204,14 +194,6 @@ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
@@ -234,4 +216,11 @@ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
-- 
2.43.0

[PATCH 6.7 200/713] pwm: atmel-hlcdc: Fix clock imbalance related to suspend support

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit e25ac87d3f831fed002c34aadddaf4ebb4ea45ec ]

The suspend callback disables the periph clock when the PWM is enabled
and resume reenables this clock if the PWM was disabled before. Judging
from the code comment it's suspend that is wrong here. Fix accordingly.

Fixes: f9bb9da7c09d ("pwm: atmel-hlcdc: Implement the suspend/resume hooks")
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/b51ea92b0a45eff3dc83b08adefd43d930df996c.1706269232.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-atmel-hlcdc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index 07920e0347575..584288d8c0503 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -186,7 +186,7 @@ static int atmel_hlcdc_pwm_suspend(struct device *dev)
 	struct atmel_hlcdc_pwm *atmel = dev_get_drvdata(dev);
 
 	/* Keep the periph clock enabled if the PWM is still running. */
-	if (pwm_is_enabled(&atmel->chip.pwms[0]))
+	if (!pwm_is_enabled(&atmel->chip.pwms[0]))
 		clk_disable_unprepare(atmel->hlcdc->periph_clk);
 
 	return 0;
-- 
2.43.0

[PATCH 6.7 201/713] net: blackhole_dev: fix build warning for ethh set but not used

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 843a8851e89e2e85db04caaf88d8554818319047 ]

lib/test_blackhole_dev.c sets a variable that is never read, causing
this following building warning:

	lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable]

Remove the variable struct ethhdr *ethh, which is unused.

Fixes: 509e56b37cc3 ("blackhole_dev: add a selftest")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_blackhole_dev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/lib/test_blackhole_dev.c b/lib/test_blackhole_dev.c
index 4c40580a99a36..f247089d63c08 100644
--- a/lib/test_blackhole_dev.c
+++ b/lib/test_blackhole_dev.c
@@ -29,7 +29,6 @@ static int __init test_blackholedev_init(void)
 {
 	struct ipv6hdr *ip6h;
 	struct sk_buff *skb;
-	struct ethhdr *ethh;
 	struct udphdr *uh;
 	int data_len;
 	int ret;
@@ -61,7 +60,7 @@ static int __init test_blackholedev_init(void)
 	ip6h->saddr = in6addr_loopback;
 	ip6h->daddr = in6addr_loopback;
 	/* Ether */
-	ethh = (struct ethhdr *)skb_push(skb, sizeof(struct ethhdr));
+	skb_push(skb, sizeof(struct ethhdr));
 	skb_set_mac_header(skb, 0);
 
 	skb->protocol = htons(ETH_P_IPV6);
-- 
2.43.0

[PATCH 6.7 202/713] arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node

[Sasha Levin]

From: Ravi Gunasekaran <r-gunasekaran@ti.com>

[ Upstream commit 8839a9af397e803e0447a6b3e69fad54ed22d26d ]

Enable the CPSW MDIO node, and link the pinctrl information to enable
ethernet on SK-AM62P.

Ethernet was unintentally broken on this board, even though these nodes
were already present, as enabling them was missed in the original
patch.

Fixes: c00504ea42c0 ("arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240201-am62p_cpsw_mdio-v1-1-05f758300f6e@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index f377eadef0c12..04e51934d24ca 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -445,6 +445,10 @@ &cpsw_port2 {
 };
 
 &cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+	status = "okay";
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-- 
2.43.0

[PATCH 6.7 203/713] arm64: dts: ti: k3-j721s2: Fix power domain for VTM node

[Sasha Levin]

From: Manorit Chawdhry <m-chawdhry@ti.com>

[ Upstream commit 5ef196ed912e80a1e64936119ced8d7eb5635f0f ]

Fix the power domain device ID for wkup_vtm0 node.

Link: https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j721s2/devices.html
Fixes: d148e3fe52c8 ("arm64: dts: ti: j721s2: Add VTM node")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240201-b4-upstream-j721s2-fix-vtm-devid-v2-1-85fd568b77e3@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7254f3bd3634d..c9cf1dc04f7d9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -652,7 +652,7 @@ wkup_vtm0: temperature-sensor@42040000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x0 0x350>,
 		      <0x00 0x42050000 0x0 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
-- 
2.43.0

[PATCH 6.7 204/713] arm64: dts: ti: k3-j784s4: Fix power domain for VTM node

[Sasha Levin]

From: Manorit Chawdhry <m-chawdhry@ti.com>

[ Upstream commit e4d252e6d29208aea56d4c04270523e306b1e3c2 ]

Fix the power domain device ID for wkup_vtm0 node.

Link: https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/devices.html
Fixes: 64821fbf6738 ("arm64: dts: ti: j784s4: Add VTM node")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240201-b4-upstream-j721s2-fix-vtm-devid-v2-2-85fd568b77e3@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index adb5ea6b97321..37fc48aae6945 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -616,7 +616,7 @@ wkup_vtm0: temperature-sensor@42040000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x00 0x350>,
 		      <0x00 0x42050000 0x00 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
-- 
2.43.0

[PATCH 6.7 205/713] wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use

[Sasha Levin]

From: Baochen Qiang <quic_bqiang@quicinc.com>

[ Upstream commit b802e7b7e771dee3377d071418281f8b64d2d832 ]

Currently in ath11k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160
are used to calculate max_nss, see
	if (support_160)
		max_nss = min(rx_mcs_80, rx_mcs_160);
	else
		max_nss = rx_mcs_80;

Kernel test robot complains on uninitialized symbols:
drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.
drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'.
drivers/net/wireless/ath/ath11k/mac.c:2323 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.

This is because there are some code paths that never set them, so
the assignment of max_nss can come from uninitialized variables.
This could result in some unknown issues since a wrong peer_nss
might be passed to firmware.

Change to initialize them to an invalid value at the beginning. This
makes sense because even max_nss gets an invalid value, due to either
or both of them being invalid, we can get an valid peer_nss with
following guard:
	arg->peer_nss = min(sta->deflink.rx_nss, max_nss)

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: 3db26ecf7114 ("ath11k: calculate the correct NSS of peer for HE capabilities")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240202023547.11141-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index e09b21a82c20f..1c4613b1bd225 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2297,6 +2297,8 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
 	mcs_160_map = le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_160);
 	mcs_80_map = le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_80);
 
+	/* Initialize rx_mcs_160 to 9 which is an invalid value */
+	rx_mcs_160 = 9;
 	if (support_160) {
 		for (i = 7; i >= 0; i--) {
 			u8 mcs_160 = (mcs_160_map >> (2 * i)) & 3;
@@ -2308,6 +2310,8 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
 		}
 	}
 
+	/* Initialize rx_mcs_80 to 9 which is an invalid value */
+	rx_mcs_80 = 9;
 	for (i = 7; i >= 0; i--) {
 		u8 mcs_80 = (mcs_80_map >> (2 * i)) & 3;
 
-- 
2.43.0

[PATCH 6.7 206/713] wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 5f0e4aede01cb01fa633171f0533affd25328c3a ]

In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().

Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/cmd.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/cmd.c b/drivers/net/wireless/marvell/libertas/cmd.c
index 104d2b6dc9af6..5a525da434c28 100644
--- a/drivers/net/wireless/marvell/libertas/cmd.c
+++ b/drivers/net/wireless/marvell/libertas/cmd.c
@@ -1132,7 +1132,7 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		if (!cmdarray[i].cmdbuf) {
 			lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n");
 			ret = -1;
-			goto done;
+			goto free_cmd_array;
 		}
 	}
 
@@ -1140,8 +1140,17 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		init_waitqueue_head(&cmdarray[i].cmdwait_q);
 		lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]);
 	}
-	ret = 0;
+	return 0;
 
+free_cmd_array:
+	for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+		if (cmdarray[i].cmdbuf) {
+			kfree(cmdarray[i].cmdbuf);
+			cmdarray[i].cmdbuf = NULL;
+		}
+	}
+	kfree(priv->cmd_array);
+	priv->cmd_array = NULL;
 done:
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 207/713] arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP

[Sasha Levin]

From: Jayesh Choudhary <j-choudhary@ti.com>

[ Upstream commit cfdb4f7ffdb855c1a3d274dc7757e780dcbf2d55 ]

VP2 and VP3 are unused video ports and VP3 share the same parent
clock as VP1 causing issue with pixel clock setting for HDMI (VP1).
The current DM firmware does not support changing parent clock if it
is shared by another component. It returns 0 for the determine_rate
query before causing set_rate to set the clock at default maximum of
1.8GHz which is a lot more than the maximum frequency videoports can
support (600MHz) causing SYNC LOST issues.
So remove the parent clocks for unused VPs to avoid conflict.

Fixes: 6f8605fd7d11 ("arm64: dts: ti: k3-am69-sk: Add DP and HDMI support")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com>
Link: https://lore.kernel.org/r/20240201142308.4954-1-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 9868c7049bfb9..fafa09d6dcc64 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -824,13 +824,9 @@ &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_vout0_pins_default>;
 	assigned-clocks = <&k3_clks 218 2>,
-			  <&k3_clks 218 5>,
-			  <&k3_clks 218 14>,
-			  <&k3_clks 218 18>;
+			  <&k3_clks 218 5>;
 	assigned-clock-parents = <&k3_clks 218 3>,
-				 <&k3_clks 218 7>,
-				 <&k3_clks 218 16>,
-				 <&k3_clks 218 22>;
+				 <&k3_clks 218 7>;
 };
 
 &serdes_wiz4 {
-- 
2.43.0

[PATCH 6.7 208/713] arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes

[Sasha Levin]

From: Vaishnav Achath <vaishnav.a@ti.com>

[ Upstream commit dfc90e5f1a0fe0f8124521bc1911e38aa6cd9118 ]

K3 Remoteproc R5 driver requires reserved memory carveouts and
mailbox configuration to instantiate the cores successfully.
Since this is a board level dependency, keep the R5 subsytem
disabled at SoC dtsi, otherwise it results in probe errors like
below during AM62P SK boot:

r5fss@79000000: reserved memory init failed, ret = -22
r5fss@79000000: k3_r5_cluster_rproc_init failed, ret = -22
r5fss@78000000: reserved memory init failed, ret = -22
r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22

Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240121134017.374992-1-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi    | 2 ++
 arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi | 1 +
 2 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
index c4b0b91d70cf3..14eb9ba836d32 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
@@ -187,6 +187,8 @@ mcu_r5fss0: r5fss@79000000 {
 		ranges = <0x79000000 0x00 0x79000000 0x8000>,
 			 <0x79020000 0x00 0x79020000 0x8000>;
 		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
 		mcu_r5fss0_core0: r5f@79000000 {
 			compatible = "ti,am62-r5f";
 			reg = <0x79000000 0x00008000>,
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
index 19f42b39394ee..10a7059b2d9b5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
@@ -78,6 +78,7 @@ wkup_r5fss0: r5fss@78000000 {
 		ranges = <0x78000000 0x00 0x78000000 0x8000>,
 			 <0x78100000 0x00 0x78100000 0x8000>;
 		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		wkup_r5fss0_core0: r5f@78000000 {
 			compatible = "ti,am62-r5f";
-- 
2.43.0

[PATCH 6.7 209/713] libbpf: Use OPTS_SET() macro in bpf_xdp_query()

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 92a871ab9fa59a74d013bc04f321026a057618e7 ]

When the feature_flags and xdp_zc_max_segs fields were added to the libbpf
bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro.
This causes libbpf to write to those fields unconditionally, which means
that programs compiled against an older version of libbpf (with a smaller
size of the bpf_xdp_query_opts struct) will have its stack corrupted by
libbpf writing out of bounds.

The patch adding the feature_flags field has an early bail out if the
feature_flags field is not part of the opts struct (via the OPTS_HAS)
macro, but the patch adding xdp_zc_max_segs does not. For consistency, this
fix just changes the assignments to both fields to use the OPTS_SET()
macro.

Fixes: 13ce2daa259a ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206125922.1992815-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/netlink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index 090bcf6e3b3d5..68a2def171751 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -496,8 +496,8 @@ int bpf_xdp_query(int ifindex, int xdp_flags, struct bpf_xdp_query_opts *opts)
 	if (err)
 		return libbpf_err(err);
 
-	opts->feature_flags = md.flags;
-	opts->xdp_zc_max_segs = md.xdp_zc_max_segs;
+	OPTS_SET(opts, feature_flags, md.flags);
+	OPTS_SET(opts, xdp_zc_max_segs, md.xdp_zc_max_segs);
 
 skip_feature_flags:
 	return 0;
-- 
2.43.0

[PATCH 6.7 210/713] wifi: wfx: fix memory leak when starting AP

[Sasha Levin]

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

[ Upstream commit b8cfb7c819dd39965136a66fe3a7fde688d976fc ]

Kmemleak reported this error:

    unreferenced object 0xd73d1180 (size 184):
      comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s)
      hex dump (first 32 bytes):
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
        00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00  ................
      backtrace:
        [<5ca11420>] kmem_cache_alloc+0x20c/0x5ac
        [<127bdd74>] __alloc_skb+0x144/0x170
        [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
        [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
        [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
        [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
        [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
        [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
        [<47bd8b68>] genl_rcv_msg+0x198/0x378
        [<453ef796>] netlink_rcv_skb+0xd0/0x130
        [<6b7c977a>] genl_rcv+0x34/0x44
        [<66b2d04d>] netlink_unicast+0x1b4/0x258
        [<f965b9b6>] netlink_sendmsg+0x1e8/0x428
        [<aadb8231>] ____sys_sendmsg+0x1e0/0x274
        [<d2b5212d>] ___sys_sendmsg+0x80/0xb4
        [<69954f45>] __sys_sendmsg+0x64/0xa8
    unreferenced object 0xce087000 (size 1024):
      comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s)
      hex dump (first 32 bytes):
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
        10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
      backtrace:
        [<9a993714>] __kmalloc_track_caller+0x230/0x600
        [<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74
        [<a2c61343>] __alloc_skb+0xa0/0x170
        [<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
        [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
        [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
        [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
        [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
        [<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
        [<47bd8b68>] genl_rcv_msg+0x198/0x378
        [<453ef796>] netlink_rcv_skb+0xd0/0x130
        [<6b7c977a>] genl_rcv+0x34/0x44
        [<66b2d04d>] netlink_unicast+0x1b4/0x258
        [<f965b9b6>] netlink_sendmsg+0x1e8/0x428
        [<aadb8231>] ____sys_sendmsg+0x1e0/0x274
        [<d2b5212d>] ___sys_sendmsg+0x80/0xb4

However, since the kernel is build optimized, it seems the stack is not
accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue
is obvious in this function: memory allocated by ieee80211_beacon_get()
is never released. Fixing this leak makes kmemleak happy.

Reported-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Co-developed-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Signed-off-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Fixes: 268bceec1684 ("staging: wfx: fix BA when device is AP and MFP is enabled")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202164213.1606145-1-jerome.pouiller@silabs.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/silabs/wfx/sta.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/silabs/wfx/sta.c b/drivers/net/wireless/silabs/wfx/sta.c
index 537caf9d914a7..bb4446b88c12b 100644
--- a/drivers/net/wireless/silabs/wfx/sta.c
+++ b/drivers/net/wireless/silabs/wfx/sta.c
@@ -344,6 +344,7 @@ static int wfx_set_mfp_ap(struct wfx_vif *wvif)
 	const int pairwise_cipher_suite_count_offset = 8 / sizeof(u16);
 	const int pairwise_cipher_suite_size = 4 / sizeof(u16);
 	const int akm_suite_size = 4 / sizeof(u16);
+	int ret = -EINVAL;
 	const u16 *ptr;
 
 	if (unlikely(!skb))
@@ -352,22 +353,26 @@ static int wfx_set_mfp_ap(struct wfx_vif *wvif)
 	ptr = (u16 *)cfg80211_find_ie(WLAN_EID_RSN, skb->data + ieoffset,
 				      skb->len - ieoffset);
 	if (unlikely(!ptr))
-		return -EINVAL;
+		goto free_skb;
 
 	ptr += pairwise_cipher_suite_count_offset;
 	if (WARN_ON(ptr > (u16 *)skb_tail_pointer(skb)))
-		return -EINVAL;
+		goto free_skb;
 
 	ptr += 1 + pairwise_cipher_suite_size * *ptr;
 	if (WARN_ON(ptr > (u16 *)skb_tail_pointer(skb)))
-		return -EINVAL;
+		goto free_skb;
 
 	ptr += 1 + akm_suite_size * *ptr;
 	if (WARN_ON(ptr > (u16 *)skb_tail_pointer(skb)))
-		return -EINVAL;
+		goto free_skb;
 
 	wfx_hif_set_mfp(wvif, *ptr & BIT(7), *ptr & BIT(6));
-	return 0;
+	ret = 0;
+
+free_skb:
+	dev_kfree_skb(skb);
+	return ret;
 }
 
 int wfx_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-- 
2.43.0

[PATCH 6.7 211/713] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit b7efebfeb2e8ad8187cdabba5f0212ba2e6c1069 ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: fc835b2311d4 ("arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 35 +++++++++++----------------
 1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ebc5ba1b369e9..7dd0d4ce25ef4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2157,7 +2157,7 @@ usb3_dwc3: usb@a800000 {
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2166,33 +2166,26 @@ usb3_dwc3: usb@a800000 {
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
-- 
2.43.0

[PATCH 6.7 212/713] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit fc835b2311d4deb85d776c1d73562338462aa7ac ]

The USB3 PHY on the MSM8998 platform doesn't have built-in
PCS_MISC_CLAMP_ENABLE register. Instead clamping is handled separately
via the register in the TCSR space. Declare corresponding register.

Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240117-usbc-phy-vls-clamp-v2-4-a950c223f10f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 7dd0d4ce25ef4..610ffd0f9e18e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1082,6 +1082,11 @@ tcsr_regs_1: syscon@1f60000 {
 			reg = <0x01f60000 0x20000>;
 		};
 
+		tcsr_regs_2: syscon@1fc0000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01fc0000 0x26000>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,msm8998-pinctrl";
 			reg = <0x03400000 0xc00000>;
@@ -2185,6 +2190,8 @@ usb3phy: phy@c010000 {
 			reset-names = "phy",
 				      "phy_phy";
 
+			qcom,tcsr-reg = <&tcsr_regs_2 0xb244>;
+
 			status = "disabled";
 		};
 
-- 
2.43.0

[PATCH 6.7 213/713] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit acb94d67f5a23dbb2e0021b6c30609ed05d7d6a5 ]

The USB3 PHY on the QCM2290 platform doesn't have built-in
PCS_MISC_CLAMP_ENABLE register. Instead clamping is handled separately
via the register in the TCSR space. Declare corresponding register.

Fixes: 0c55f6229bc3 ("arm64: dts: qcom: qcm2290: Add USB3 PHY")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240117-usbc-phy-vls-clamp-v2-5-a950c223f10f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e72b5c..40a8506553ef5 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -418,6 +418,11 @@ tcsr_mutex: hwlock@340000 {
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
@@ -665,6 +670,8 @@ usb_qmpphy: phy@1615000 {
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
-- 
2.43.0

[PATCH 6.7 214/713] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 95d739ed962c9aaa17d77b739606dbdf31879f6e ]

The USB3 PHY on the SM6115 platform doesn't have built-in
PCS_MISC_CLAMP_ENABLE register. Instead clamping is handled separately
via the register in the TCSR space. Declare corresponding register.

Fixes: 9dd5f6dba729 ("arm64: dts: qcom: sm6115: Add USB SS qmp phy node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240117-usbc-phy-vls-clamp-v2-6-a950c223f10f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c603512403..87cbc4e8b1ed5 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -591,6 +591,11 @@ tcsr_mutex: hwlock@340000 {
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,sm6115-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
 			reg = <0x0 0x00500000 0x0 0x400000>,
@@ -856,6 +861,8 @@ usb_qmpphy: phy@1615000 {
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
-- 
2.43.0

[PATCH 6.7 215/713] wifi: ath12k: fix incorrect logic of calculating vdev_stats_id

[Sasha Levin]

From: Kang Yang <quic_kangyang@quicinc.com>

[ Upstream commit 019b58dcb6ed267e17b7efd03ec8575c1b67d942 ]

During calculate vdev_stats_id, will compare vdev_stats_id with
ATH12K_INVAL_VDEV_STATS_ID by '<='. If vdev_stats_id is relatively
small, then assign ATH12K_INVAL_VDEV_STATS_ID to vdev_stats_id.

This logic is incorrect. Firstly, should use '>=' instead of '<=' to
check if this u8 variable exceeds the max valid range.

Secondly, should use the maximum value as comparison value.

Correct comparison symbols and use the maximum value
ATH12K_MAX_VDEV_STATS_ID for comparison.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130040303.370590-3-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 54693e247cb31..237fb8e7cfa46 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -5261,7 +5261,7 @@ ath12k_mac_get_vdev_stats_id(struct ath12k_vif *arvif)
 	do {
 		if (ab->free_vdev_stats_id_map & (1LL << vdev_stats_id)) {
 			vdev_stats_id++;
-			if (vdev_stats_id <= ATH12K_INVAL_VDEV_STATS_ID) {
+			if (vdev_stats_id >= ATH12K_MAX_VDEV_STATS_ID) {
 				vdev_stats_id = ATH12K_INVAL_VDEV_STATS_ID;
 				break;
 			}
-- 
2.43.0

[PATCH 6.7 216/713] printk: nbcon: Relocate 32bit seq macros

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 5b73e706f00f3553e1a4efbb31951ce9fe18f2dc ]

The macros __seq_to_nbcon_seq() and __nbcon_seq_to_seq() are
used to provide support for atomic handling of sequence numbers
on 32bit systems. Until now this was only used by nbcon.c,
which is why they were located in nbcon.c and include nbcon in
the name.

In a follow-up commit this functionality is also needed by
printk_ringbuffer. Rather than duplicating the functionality,
relocate the macros to printk_ringbuffer.h.

Also, since the macros will be no longer nbcon-specific, rename
them to __u64seq_to_ulseq() and __ulseq_to_u64seq().

This does not result in any functional change.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Stable-dep-of: 5f72e52ba959 ("printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/nbcon.c             | 41 +++----------------------------
 kernel/printk/printk_ringbuffer.h | 33 +++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/kernel/printk/nbcon.c b/kernel/printk/nbcon.c
index b96077152f49d..c8093bcc01fe6 100644
--- a/kernel/printk/nbcon.c
+++ b/kernel/printk/nbcon.c
@@ -140,39 +140,6 @@ static inline bool nbcon_state_try_cmpxchg(struct console *con, struct nbcon_sta
 	return atomic_try_cmpxchg(&ACCESS_PRIVATE(con, nbcon_state), &cur->atom, new->atom);
 }
 
-#ifdef CONFIG_64BIT
-
-#define __seq_to_nbcon_seq(seq) (seq)
-#define __nbcon_seq_to_seq(seq) (seq)
-
-#else /* CONFIG_64BIT */
-
-#define __seq_to_nbcon_seq(seq) ((u32)seq)
-
-static inline u64 __nbcon_seq_to_seq(u32 nbcon_seq)
-{
-	u64 seq;
-	u64 rb_next_seq;
-
-	/*
-	 * The provided sequence is only the lower 32 bits of the ringbuffer
-	 * sequence. It needs to be expanded to 64bit. Get the next sequence
-	 * number from the ringbuffer and fold it.
-	 *
-	 * Having a 32bit representation in the console is sufficient.
-	 * If a console ever gets more than 2^31 records behind
-	 * the ringbuffer then this is the least of the problems.
-	 *
-	 * Also the access to the ring buffer is always safe.
-	 */
-	rb_next_seq = prb_next_seq(prb);
-	seq = rb_next_seq - ((u32)rb_next_seq - nbcon_seq);
-
-	return seq;
-}
-
-#endif /* CONFIG_64BIT */
-
 /**
  * nbcon_seq_read - Read the current console sequence
  * @con:	Console to read the sequence of
@@ -183,7 +150,7 @@ u64 nbcon_seq_read(struct console *con)
 {
 	unsigned long nbcon_seq = atomic_long_read(&ACCESS_PRIVATE(con, nbcon_seq));
 
-	return __nbcon_seq_to_seq(nbcon_seq);
+	return __ulseq_to_u64seq(prb, nbcon_seq);
 }
 
 /**
@@ -204,7 +171,7 @@ void nbcon_seq_force(struct console *con, u64 seq)
 	 */
 	u64 valid_seq = max_t(u64, seq, prb_first_valid_seq(prb));
 
-	atomic_long_set(&ACCESS_PRIVATE(con, nbcon_seq), __seq_to_nbcon_seq(valid_seq));
+	atomic_long_set(&ACCESS_PRIVATE(con, nbcon_seq), __u64seq_to_ulseq(valid_seq));
 
 	/* Clear con->seq since nbcon consoles use con->nbcon_seq instead. */
 	con->seq = 0;
@@ -223,11 +190,11 @@ void nbcon_seq_force(struct console *con, u64 seq)
  */
 static void nbcon_seq_try_update(struct nbcon_context *ctxt, u64 new_seq)
 {
-	unsigned long nbcon_seq = __seq_to_nbcon_seq(ctxt->seq);
+	unsigned long nbcon_seq = __u64seq_to_ulseq(ctxt->seq);
 	struct console *con = ctxt->console;
 
 	if (atomic_long_try_cmpxchg(&ACCESS_PRIVATE(con, nbcon_seq), &nbcon_seq,
-				    __seq_to_nbcon_seq(new_seq))) {
+				    __u64seq_to_ulseq(new_seq))) {
 		ctxt->seq = new_seq;
 	} else {
 		ctxt->seq = nbcon_seq_read(con);
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
index 18cd25e489b89..b82a96dc2ea2b 100644
--- a/kernel/printk/printk_ringbuffer.h
+++ b/kernel/printk/printk_ringbuffer.h
@@ -381,4 +381,37 @@ bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
 u64 prb_first_valid_seq(struct printk_ringbuffer *rb);
 u64 prb_next_seq(struct printk_ringbuffer *rb);
 
+#ifdef CONFIG_64BIT
+
+#define __u64seq_to_ulseq(u64seq) (u64seq)
+#define __ulseq_to_u64seq(rb, ulseq) (ulseq)
+
+#else /* CONFIG_64BIT */
+
+#define __u64seq_to_ulseq(u64seq) ((u32)u64seq)
+
+static inline u64 __ulseq_to_u64seq(struct printk_ringbuffer *rb, u32 ulseq)
+{
+	u64 seq;
+	u64 rb_next_seq;
+
+	/*
+	 * The provided sequence is only the lower 32 bits of the ringbuffer
+	 * sequence. It needs to be expanded to 64bit. Get the next sequence
+	 * number from the ringbuffer and fold it.
+	 *
+	 * Having a 32bit representation in the console is sufficient.
+	 * If a console ever gets more than 2^31 records behind
+	 * the ringbuffer then this is the least of the problems.
+	 *
+	 * Also the access to the ring buffer is always safe.
+	 */
+	rb_next_seq = prb_next_seq(rb);
+	seq = rb_next_seq - ((u32)rb_next_seq - ulseq);
+
+	return seq;
+}
+
+#endif /* CONFIG_64BIT */
+
 #endif /* _KERNEL_PRINTK_RINGBUFFER_H */
-- 
2.43.0

[PATCH 6.7 217/713] printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 5f72e52ba959e50680b8d83599da1368cd7a6ee2 ]

Commit f244b4dc53e5 ("printk: ringbuffer: Improve
prb_next_seq() performance") introduced an optimization for
prb_next_seq() by using best-effort to track recently finalized
records. However, the order of finalization does not
necessarily match the order of the records. The optimization
changed prb_next_seq() to return inconsistent results, possibly
yielding sequence numbers that are not available to readers
because they are preceded by non-finalized records or they are
not yet visible to the reader CPU.

Rather than simply best-effort tracking recently finalized
records, force the committing writer to read records and
increment the last "contiguous block" of finalized records. In
order to do this, the sequence number instead of ID must be
stored because ID's cannot be directly compared.

A new memory barrier pair is introduced to guarantee that a
reader can always read the records up until the sequence number
returned by prb_next_seq() (unless the records have since
been overwritten in the ringbuffer).

This restores the original functionality of prb_next_seq()
while also keeping the optimization.

For 32bit systems, only the lower 32 bits of the sequence
number are stored. When reading the value, it is expanded to
the full 64bit sequence number using the 32bit seq macros,
which fold in the value returned by prb_first_seq().

Fixes: f244b4dc53e5 ("printk: ringbuffer: Improve prb_next_seq() performance")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk_ringbuffer.c | 164 +++++++++++++++++++++++-------
 kernel/printk/printk_ringbuffer.h |   4 +-
 2 files changed, 127 insertions(+), 41 deletions(-)

diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
index fde338606ce83..4ce1826dc9426 100644
--- a/kernel/printk/printk_ringbuffer.c
+++ b/kernel/printk/printk_ringbuffer.c
@@ -6,6 +6,7 @@
 #include <linux/errno.h>
 #include <linux/bug.h>
 #include "printk_ringbuffer.h"
+#include "internal.h"
 
 /**
  * DOC: printk_ringbuffer overview
@@ -303,6 +304,9 @@
  *
  *   desc_push_tail:B / desc_reserve:D
  *     set descriptor reusable (state), then push descriptor tail (id)
+ *
+ *   desc_update_last_finalized:A / desc_last_finalized_seq:A
+ *     store finalized record, then set new highest finalized sequence number
  */
 
 #define DATA_SIZE(data_ring)		_DATA_SIZE((data_ring)->size_bits)
@@ -1441,20 +1445,118 @@ bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer
 	return false;
 }
 
+/*
+ * @last_finalized_seq value guarantees that all records up to and including
+ * this sequence number are finalized and can be read. The only exception are
+ * too old records which have already been overwritten.
+ *
+ * It is also guaranteed that @last_finalized_seq only increases.
+ *
+ * Be aware that finalized records following non-finalized records are not
+ * reported because they are not yet available to the reader. For example,
+ * a new record stored via printk() will not be available to a printer if
+ * it follows a record that has not been finalized yet. However, once that
+ * non-finalized record becomes finalized, @last_finalized_seq will be
+ * appropriately updated and the full set of finalized records will be
+ * available to the printer. And since each printk() caller will either
+ * directly print or trigger deferred printing of all available unprinted
+ * records, all printk() messages will get printed.
+ */
+static u64 desc_last_finalized_seq(struct printk_ringbuffer *rb)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	unsigned long ulseq;
+
+	/*
+	 * Guarantee the sequence number is loaded before loading the
+	 * associated record in order to guarantee that the record can be
+	 * seen by this CPU. This pairs with desc_update_last_finalized:A.
+	 */
+	ulseq = atomic_long_read_acquire(&desc_ring->last_finalized_seq
+					); /* LMM(desc_last_finalized_seq:A) */
+
+	return __ulseq_to_u64seq(rb, ulseq);
+}
+
+static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
+			    struct printk_record *r, unsigned int *line_count);
+
+/*
+ * Check if there are records directly following @last_finalized_seq that are
+ * finalized. If so, update @last_finalized_seq to the latest of these
+ * records. It is not allowed to skip over records that are not yet finalized.
+ */
+static void desc_update_last_finalized(struct printk_ringbuffer *rb)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	u64 old_seq = desc_last_finalized_seq(rb);
+	unsigned long oldval;
+	unsigned long newval;
+	u64 finalized_seq;
+	u64 try_seq;
+
+try_again:
+	finalized_seq = old_seq;
+	try_seq = finalized_seq + 1;
+
+	/* Try to find later finalized records. */
+	while (_prb_read_valid(rb, &try_seq, NULL, NULL)) {
+		finalized_seq = try_seq;
+		try_seq++;
+	}
+
+	/* No update needed if no later finalized record was found. */
+	if (finalized_seq == old_seq)
+		return;
+
+	oldval = __u64seq_to_ulseq(old_seq);
+	newval = __u64seq_to_ulseq(finalized_seq);
+
+	/*
+	 * Set the sequence number of a later finalized record that has been
+	 * seen.
+	 *
+	 * Guarantee the record data is visible to other CPUs before storing
+	 * its sequence number. This pairs with desc_last_finalized_seq:A.
+	 *
+	 * Memory barrier involvement:
+	 *
+	 * If desc_last_finalized_seq:A reads from
+	 * desc_update_last_finalized:A, then desc_read:A reads from
+	 * _prb_commit:B.
+	 *
+	 * Relies on:
+	 *
+	 * RELEASE from _prb_commit:B to desc_update_last_finalized:A
+	 *    matching
+	 * ACQUIRE from desc_last_finalized_seq:A to desc_read:A
+	 *
+	 * Note: _prb_commit:B and desc_update_last_finalized:A can be
+	 *       different CPUs. However, the desc_update_last_finalized:A
+	 *       CPU (which performs the release) must have previously seen
+	 *       _prb_commit:B.
+	 */
+	if (!atomic_long_try_cmpxchg_release(&desc_ring->last_finalized_seq,
+				&oldval, newval)) { /* LMM(desc_update_last_finalized:A) */
+		old_seq = __ulseq_to_u64seq(rb, oldval);
+		goto try_again;
+	}
+}
+
 /*
  * Attempt to finalize a specified descriptor. If this fails, the descriptor
  * is either already final or it will finalize itself when the writer commits.
  */
-static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id)
+static void desc_make_final(struct printk_ringbuffer *rb, unsigned long id)
 {
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
 	unsigned long prev_state_val = DESC_SV(id, desc_committed);
 	struct prb_desc *d = to_desc(desc_ring, id);
 
-	atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val,
-			DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */
-
-	/* Best effort to remember the last finalized @id. */
-	atomic_long_set(&desc_ring->last_finalized_id, id);
+	if (atomic_long_try_cmpxchg_relaxed(&d->state_var, &prev_state_val,
+			DESC_SV(id, desc_finalized))) { /* LMM(desc_make_final:A) */
+		desc_update_last_finalized(rb);
+	}
 }
 
 /**
@@ -1550,7 +1652,7 @@ bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
 	 * readers. (For seq==0 there is no previous descriptor.)
 	 */
 	if (info->seq > 0)
-		desc_make_final(desc_ring, DESC_ID(id - 1));
+		desc_make_final(rb, DESC_ID(id - 1));
 
 	r->text_buf = data_alloc(rb, r->text_buf_size, &d->text_blk_lpos, id);
 	/* If text data allocation fails, a data-less record is committed. */
@@ -1643,7 +1745,7 @@ void prb_commit(struct prb_reserved_entry *e)
 	 */
 	head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_commit:A) */
 	if (head_id != e->id)
-		desc_make_final(desc_ring, e->id);
+		desc_make_final(e->rb, e->id);
 }
 
 /**
@@ -1663,12 +1765,9 @@ void prb_commit(struct prb_reserved_entry *e)
  */
 void prb_final_commit(struct prb_reserved_entry *e)
 {
-	struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
-
 	_prb_commit(e, desc_finalized);
 
-	/* Best effort to remember the last finalized @id. */
-	atomic_long_set(&desc_ring->last_finalized_id, e->id);
+	desc_update_last_finalized(e->rb);
 }
 
 /*
@@ -2008,7 +2107,9 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
  * newest sequence number available to readers will be.
  *
  * This provides readers a sequence number to jump to if all currently
- * available records should be skipped.
+ * available records should be skipped. It is guaranteed that all records
+ * previous to the returned value have been finalized and are (or were)
+ * available to the reader.
  *
  * Context: Any context.
  * Return: The sequence number of the next newest (not yet available) record
@@ -2016,34 +2117,19 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
  */
 u64 prb_next_seq(struct printk_ringbuffer *rb)
 {
-	struct prb_desc_ring *desc_ring = &rb->desc_ring;
-	enum desc_state d_state;
-	unsigned long id;
 	u64 seq;
 
-	/* Check if the cached @id still points to a valid @seq. */
-	id = atomic_long_read(&desc_ring->last_finalized_id);
-	d_state = desc_read(desc_ring, id, NULL, &seq, NULL);
+	seq = desc_last_finalized_seq(rb);
 
-	if (d_state == desc_finalized || d_state == desc_reusable) {
-		/*
-		 * Begin searching after the last finalized record.
-		 *
-		 * On 0, the search must begin at 0 because of hack#2
-		 * of the bootstrapping phase it is not known if a
-		 * record at index 0 exists.
-		 */
-		if (seq != 0)
-			seq++;
-	} else {
-		/*
-		 * The information about the last finalized sequence number
-		 * has gone. It should happen only when there is a flood of
-		 * new messages and the ringbuffer is rapidly recycled.
-		 * Give up and start from the beginning.
-		 */
-		seq = 0;
-	}
+	/*
+	 * Begin searching after the last finalized record.
+	 *
+	 * On 0, the search must begin at 0 because of hack#2
+	 * of the bootstrapping phase it is not known if a
+	 * record at index 0 exists.
+	 */
+	if (seq != 0)
+		seq++;
 
 	/*
 	 * The information about the last finalized @seq might be inaccurate.
@@ -2085,7 +2171,7 @@ void prb_init(struct printk_ringbuffer *rb,
 	rb->desc_ring.infos = infos;
 	atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
 	atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
-	atomic_long_set(&rb->desc_ring.last_finalized_id, DESC0_ID(descbits));
+	atomic_long_set(&rb->desc_ring.last_finalized_seq, 0);
 
 	rb->text_data_ring.size_bits = textbits;
 	rb->text_data_ring.data = text_buf;
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
index b82a96dc2ea2b..70457916d577d 100644
--- a/kernel/printk/printk_ringbuffer.h
+++ b/kernel/printk/printk_ringbuffer.h
@@ -75,7 +75,7 @@ struct prb_desc_ring {
 	struct printk_info	*infos;
 	atomic_long_t		head_id;
 	atomic_long_t		tail_id;
-	atomic_long_t		last_finalized_id;
+	atomic_long_t		last_finalized_seq;
 };
 
 /*
@@ -259,7 +259,7 @@ static struct printk_ringbuffer name = {							\
 		.infos		= &_##name##_infos[0],						\
 		.head_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
 		.tail_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
-		.last_finalized_id = ATOMIC_INIT(DESC0_ID(descbits)),				\
+		.last_finalized_seq = ATOMIC_INIT(0),						\
 	},											\
 	.text_data_ring = {									\
 		.size_bits	= (avgtextbits) + (descbits),					\
-- 
2.43.0

[PATCH 6.7 218/713] printk: Wait for all reserved records with pr_flush()

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit ac7d7844c64d15603daa3e905a311ddcfbb4bc91 ]

Currently pr_flush() will only wait for records that were
available to readers at the time of the call (using
prb_next_seq()). But there may be more records (non-finalized)
that have following finalized records. pr_flush() should wait
for these to print as well. Particularly because any trailing
finalized records may be the messages that the calling context
wants to ensure are printed.

Add a new ringbuffer function prb_next_reserve_seq() to return
the sequence number following the most recently reserved record.
This guarantees that pr_flush() will wait until all current
printk() messages (completed or in progress) have been printed.

Fixes: 3b604ca81202 ("printk: add pr_flush()")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c            |   2 +-
 kernel/printk/printk_ringbuffer.c | 105 ++++++++++++++++++++++++++++++
 kernel/printk/printk_ringbuffer.h |   1 +
 3 files changed, 107 insertions(+), 1 deletion(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index f2444b581e16c..d9420207282ac 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -3761,7 +3761,7 @@ static bool __pr_flush(struct console *con, int timeout_ms, bool reset_on_progre
 
 	might_sleep();
 
-	seq = prb_next_seq(prb);
+	seq = prb_next_reserve_seq(prb);
 
 	/* Flush the consoles so that records up to @seq are printed. */
 	console_lock();
diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
index 4ce1826dc9426..d152b6bd35c9a 100644
--- a/kernel/printk/printk_ringbuffer.c
+++ b/kernel/printk/printk_ringbuffer.c
@@ -1974,6 +1974,111 @@ static u64 prb_first_seq(struct printk_ringbuffer *rb)
 	return seq;
 }
 
+/**
+ * prb_next_reserve_seq() - Get the sequence number after the most recently
+ *                  reserved record.
+ *
+ * @rb:  The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what sequence
+ * number will be assigned to the next reserved record.
+ *
+ * Note that depending on the situation, this value can be equal to or
+ * higher than the sequence number returned by prb_next_seq().
+ *
+ * Context: Any context.
+ * Return: The sequence number that will be assigned to the next record
+ *         reserved.
+ */
+u64 prb_next_reserve_seq(struct printk_ringbuffer *rb)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	unsigned long last_finalized_id;
+	atomic_long_t *state_var;
+	u64 last_finalized_seq;
+	unsigned long head_id;
+	struct prb_desc desc;
+	unsigned long diff;
+	struct prb_desc *d;
+	int err;
+
+	/*
+	 * It may not be possible to read a sequence number for @head_id.
+	 * So the ID of @last_finailzed_seq is used to calculate what the
+	 * sequence number of @head_id will be.
+	 */
+
+try_again:
+	last_finalized_seq = desc_last_finalized_seq(rb);
+
+	/*
+	 * @head_id is loaded after @last_finalized_seq to ensure that
+	 * it points to the record with @last_finalized_seq or newer.
+	 *
+	 * Memory barrier involvement:
+	 *
+	 * If desc_last_finalized_seq:A reads from
+	 * desc_update_last_finalized:A, then
+	 * prb_next_reserve_seq:A reads from desc_reserve:D.
+	 *
+	 * Relies on:
+	 *
+	 * RELEASE from desc_reserve:D to desc_update_last_finalized:A
+	 *    matching
+	 * ACQUIRE from desc_last_finalized_seq:A to prb_next_reserve_seq:A
+	 *
+	 * Note: desc_reserve:D and desc_update_last_finalized:A can be
+	 *       different CPUs. However, the desc_update_last_finalized:A CPU
+	 *       (which performs the release) must have previously seen
+	 *       desc_read:C, which implies desc_reserve:D can be seen.
+	 */
+	head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_next_reserve_seq:A) */
+
+	d = to_desc(desc_ring, last_finalized_seq);
+	state_var = &d->state_var;
+
+	/* Extract the ID, used to specify the descriptor to read. */
+	last_finalized_id = DESC_ID(atomic_long_read(state_var));
+
+	/* Ensure @last_finalized_id is correct. */
+	err = desc_read_finalized_seq(desc_ring, last_finalized_id, last_finalized_seq, &desc);
+
+	if (err == -EINVAL) {
+		if (last_finalized_seq == 0) {
+			/*
+			 * No record has been finalized or even reserved yet.
+			 *
+			 * The @head_id is initialized such that the first
+			 * increment will yield the first record (seq=0).
+			 * Handle it separately to avoid a negative @diff
+			 * below.
+			 */
+			if (head_id == DESC0_ID(desc_ring->count_bits))
+				return 0;
+
+			/*
+			 * One or more descriptors are already reserved. Use
+			 * the descriptor ID of the first one (@seq=0) for
+			 * the @diff below.
+			 */
+			last_finalized_id = DESC0_ID(desc_ring->count_bits) + 1;
+		} else {
+			/* Record must have been overwritten. Try again. */
+			goto try_again;
+		}
+	}
+
+	/* Diff of known descriptor IDs to compute related sequence numbers. */
+	diff = head_id - last_finalized_id;
+
+	/*
+	 * @head_id points to the most recently reserved record, but this
+	 * function returns the sequence number that will be assigned to the
+	 * next (not yet reserved) record. Thus +1 is needed.
+	 */
+	return (last_finalized_seq + diff + 1);
+}
+
 /*
  * Non-blocking read of a record. Updates @seq to the last finalized record
  * (which may have no data available).
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
index 70457916d577d..5aebe97bd4afc 100644
--- a/kernel/printk/printk_ringbuffer.h
+++ b/kernel/printk/printk_ringbuffer.h
@@ -380,6 +380,7 @@ bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
 
 u64 prb_first_valid_seq(struct printk_ringbuffer *rb);
 u64 prb_next_seq(struct printk_ringbuffer *rb);
+u64 prb_next_reserve_seq(struct printk_ringbuffer *rb);
 
 #ifdef CONFIG_64BIT
 
-- 
2.43.0

[PATCH 6.7 219/713] printk: Add this_cpu_in_panic()

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 36652d0f3bf34899e82d31a5fa9e2bdd02fd6381 ]

There is already panic_in_progress() and other_cpu_in_panic(),
but checking if the current CPU is the panic CPU must still be
open coded.

Add this_cpu_in_panic() to complete the set.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-8-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Stable-dep-of: b1c4c67a5e90 ("printk: ringbuffer: Skip non-finalized records in panic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/internal.h |  1 +
 kernel/printk/printk.c   | 43 +++++++++++++++++++++-------------------
 2 files changed, 24 insertions(+), 20 deletions(-)

diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h
index 6c2afee5ef620..ac2d9750e5f81 100644
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -130,6 +130,7 @@ struct printk_message {
 };
 
 bool other_cpu_in_panic(void);
+bool this_cpu_in_panic(void);
 bool printk_get_next_message(struct printk_message *pmsg, u64 seq,
 			     bool is_extended, bool may_supress);
 
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index d9420207282ac..b7e50f8438df3 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -347,6 +347,29 @@ static bool panic_in_progress(void)
 	return unlikely(atomic_read(&panic_cpu) != PANIC_CPU_INVALID);
 }
 
+/* Return true if a panic is in progress on the current CPU. */
+bool this_cpu_in_panic(void)
+{
+	/*
+	 * We can use raw_smp_processor_id() here because it is impossible for
+	 * the task to be migrated to the panic_cpu, or away from it. If
+	 * panic_cpu has already been set, and we're not currently executing on
+	 * that CPU, then we never will be.
+	 */
+	return unlikely(atomic_read(&panic_cpu) == raw_smp_processor_id());
+}
+
+/*
+ * Return true if a panic is in progress on a remote CPU.
+ *
+ * On true, the local CPU should immediately release any printing resources
+ * that may be needed by the panic CPU.
+ */
+bool other_cpu_in_panic(void)
+{
+	return (panic_in_progress() && !this_cpu_in_panic());
+}
+
 /*
  * This is used for debugging the mess that is the VT code by
  * keeping track if we have the console semaphore held. It's
@@ -2601,26 +2624,6 @@ static int console_cpu_notify(unsigned int cpu)
 	return 0;
 }
 
-/*
- * Return true if a panic is in progress on a remote CPU.
- *
- * On true, the local CPU should immediately release any printing resources
- * that may be needed by the panic CPU.
- */
-bool other_cpu_in_panic(void)
-{
-	if (!panic_in_progress())
-		return false;
-
-	/*
-	 * We can use raw_smp_processor_id() here because it is impossible for
-	 * the task to be migrated to the panic_cpu, or away from it. If
-	 * panic_cpu has already been set, and we're not currently executing on
-	 * that CPU, then we never will be.
-	 */
-	return atomic_read(&panic_cpu) != raw_smp_processor_id();
-}
-
 /**
  * console_lock - block the console subsystem from printing
  *
-- 
2.43.0

[PATCH 6.7 220/713] printk: ringbuffer: Cleanup reader terminology

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 584528d621459d1a5c31da7a591218ad3bb96d6c ]

With the lockless ringbuffer, it is allowed that multiple
CPUs/contexts write simultaneously into the buffer. This creates
an ambiguity as some writers will finalize sooner.

The documentation for the prb_read functions is not clear as it
refers to "not yet written" and "no data available". Clarify the
return values and language to be in terms of the reader: records
available for reading.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Stable-dep-of: b1c4c67a5e90 ("printk: ringbuffer: Skip non-finalized records in panic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk_ringbuffer.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
index d152b6bd35c9a..97ec25d227976 100644
--- a/kernel/printk/printk_ringbuffer.c
+++ b/kernel/printk/printk_ringbuffer.c
@@ -2080,11 +2080,13 @@ u64 prb_next_reserve_seq(struct printk_ringbuffer *rb)
 }
 
 /*
- * Non-blocking read of a record. Updates @seq to the last finalized record
- * (which may have no data available).
+ * Non-blocking read of a record.
  *
- * See the description of prb_read_valid() and prb_read_valid_info()
- * for details.
+ * On success @seq is updated to the record that was read and (if provided)
+ * @r and @line_count will contain the read/calculated data.
+ *
+ * On failure @seq is updated to a record that is not yet available to the
+ * reader, but it will be the next record available to the reader.
  */
 static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
 			    struct printk_record *r, unsigned int *line_count)
@@ -2103,7 +2105,7 @@ static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
 			*seq = tail_seq;
 
 		} else if (err == -ENOENT) {
-			/* Record exists, but no data available. Skip. */
+			/* Record exists, but the data was lost. Skip. */
 			(*seq)++;
 
 		} else {
@@ -2136,7 +2138,7 @@ static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
  * On success, the reader must check r->info.seq to see which record was
  * actually read. This allows the reader to detect dropped records.
  *
- * Failure means @seq refers to a not yet written record.
+ * Failure means @seq refers to a record not yet available to the reader.
  */
 bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
 		    struct printk_record *r)
@@ -2166,7 +2168,7 @@ bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
  * On success, the reader must check info->seq to see which record meta data
  * was actually read. This allows the reader to detect dropped records.
  *
- * Failure means @seq refers to a not yet written record.
+ * Failure means @seq refers to a record not yet available to the reader.
  */
 bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
 			 struct printk_info *info, unsigned int *line_count)
-- 
2.43.0

[PATCH 6.7 221/713] printk: ringbuffer: Skip non-finalized records in panic

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit b1c4c67a5e90db8fbdb5b5504fe16e17b564cca8 ]

Normally a reader will stop once reaching a non-finalized
record. However, when a panic happens, writers from other CPUs
(or an interrupted context on the panic CPU) may have been
writing a record and were unable to finalize it. The panic CPU
will reserve/commit/finalize its panic records, but these will
be located after the non-finalized records. This results in
panic() not flushing the panic messages.

Extend _prb_read_valid() to skip over non-finalized records if
on the panic CPU.

Fixes: 896fbe20b4e2 ("printk: use the lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-11-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk_ringbuffer.c | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
index 97ec25d227976..3d98232902cfd 100644
--- a/kernel/printk/printk_ringbuffer.c
+++ b/kernel/printk/printk_ringbuffer.c
@@ -2087,6 +2087,10 @@ u64 prb_next_reserve_seq(struct printk_ringbuffer *rb)
  *
  * On failure @seq is updated to a record that is not yet available to the
  * reader, but it will be the next record available to the reader.
+ *
+ * Note: When the current CPU is in panic, this function will skip over any
+ *       non-existent/non-finalized records in order to allow the panic CPU
+ *       to print any and all records that have been finalized.
  */
 static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
 			    struct printk_record *r, unsigned int *line_count)
@@ -2109,8 +2113,28 @@ static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
 			(*seq)++;
 
 		} else {
-			/* Non-existent/non-finalized record. Must stop. */
-			return false;
+			/*
+			 * Non-existent/non-finalized record. Must stop.
+			 *
+			 * For panic situations it cannot be expected that
+			 * non-finalized records will become finalized. But
+			 * there may be other finalized records beyond that
+			 * need to be printed for a panic situation. If this
+			 * is the panic CPU, skip this
+			 * non-existent/non-finalized record unless it is
+			 * at or beyond the head, in which case it is not
+			 * possible to continue.
+			 *
+			 * Note that new messages printed on panic CPU are
+			 * finalized when we are here. The only exception
+			 * might be the last message without trailing newline.
+			 * But it would have the sequence number returned
+			 * by "prb_next_reserve_seq() - 1".
+			 */
+			if (this_cpu_in_panic() && ((*seq + 1) < prb_next_reserve_seq(rb)))
+				(*seq)++;
+			else
+				return false;
 		}
 	}
 
-- 
2.43.0

[PATCH 6.7 222/713] printk: Disable passing console lock owner completely during panic()

[Sasha Levin]

From: Petr Mladek <pmladek@suse.com>

[ Upstream commit d04d5882cd678b898a9d7c5aee6afbe9e6e77fcd ]

The commit d51507098ff91 ("printk: disable optimistic spin
during panic") added checks to avoid becoming a console waiter
if a panic is in progress.

However, the transition to panic can occur while there is
already a waiter. The current owner should not pass the lock to
the waiter because it might get stopped or blocked anytime.

Also the panic context might pass the console lock owner to an
already stopped waiter by mistake. It might happen when
console_flush_on_panic() ignores the current lock owner, for
example:

CPU0                                CPU1
----                                ----
console_lock_spinning_enable()
                                    console_trylock_spinning()
                                      [CPU1 now console waiter]
NMI: panic()
  panic_other_cpus_shutdown()
                                    [stopped as console waiter]
  console_flush_on_panic()
    console_lock_spinning_enable()
    [print 1 record]
    console_lock_spinning_disable_and_check()
      [handover to stopped CPU1]

This results in panic() not flushing the panic messages.

Fix these problems by disabling all spinning operations
completely during panic().

Another advantage is that it prevents possible deadlocks caused
by "console_owner_lock". The panic() context does not need to
take it any longer. The lockless checks are safe because the
functions become NOPs when they see the panic in progress. All
operations manipulating the state are still synchronized by the
lock even when non-panic CPUs would notice the panic
synchronously.

The current owner might stay spinning. But non-panic() CPUs
would get stopped anyway and the panic context will never start
spinning.

Fixes: dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20240207134103.1357162-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index b7e50f8438df3..72f6a564e832f 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1869,10 +1869,23 @@ static bool console_waiter;
  */
 static void console_lock_spinning_enable(void)
 {
+	/*
+	 * Do not use spinning in panic(). The panic CPU wants to keep the lock.
+	 * Non-panic CPUs abandon the flush anyway.
+	 *
+	 * Just keep the lockdep annotation. The panic-CPU should avoid
+	 * taking console_owner_lock because it might cause a deadlock.
+	 * This looks like the easiest way how to prevent false lockdep
+	 * reports without handling races a lockless way.
+	 */
+	if (panic_in_progress())
+		goto lockdep;
+
 	raw_spin_lock(&console_owner_lock);
 	console_owner = current;
 	raw_spin_unlock(&console_owner_lock);
 
+lockdep:
 	/* The waiter may spin on us after setting console_owner */
 	spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_);
 }
@@ -1897,6 +1910,22 @@ static int console_lock_spinning_disable_and_check(int cookie)
 {
 	int waiter;
 
+	/*
+	 * Ignore spinning waiters during panic() because they might get stopped
+	 * or blocked at any time,
+	 *
+	 * It is safe because nobody is allowed to start spinning during panic
+	 * in the first place. If there has been a waiter then non panic CPUs
+	 * might stay spinning. They would get stopped anyway. The panic context
+	 * will never start spinning and an interrupted spin on panic CPU will
+	 * never continue.
+	 */
+	if (panic_in_progress()) {
+		/* Keep lockdep happy. */
+		spin_release(&console_owner_dep_map, _THIS_IP_);
+		return 0;
+	}
+
 	raw_spin_lock(&console_owner_lock);
 	waiter = READ_ONCE(console_waiter);
 	console_owner = NULL;
-- 
2.43.0

[PATCH 6.7 223/713] pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 5f623835584f1c8d1030666796f40c47a448ce0b ]

The driver only used the number of pwm channels to set the pwm_chip's
npwm member. The result is that if there are more capture channels than
PWM channels specified in the device tree, only a part of the capture
channel is usable. Fix that by passing the bigger channel count to the
pwm framework. This makes it possible that the .apply() callback is
called with .hwpwm >= pwm_num_devs, catch that case and return an error
code.

Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20240204212043.2951852-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-sti.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index dc92cea31cd07..d885b30a147dc 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -395,8 +395,17 @@ static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
 static int sti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			 const struct pwm_state *state)
 {
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	struct device *dev = pc->dev;
 	int err;
 
+	if (pwm->hwpwm >= cdata->pwm_num_devs) {
+		dev_err(dev, "device %u is not valid for pwm mode\n",
+			pwm->hwpwm);
+		return -EINVAL;
+	}
+
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
 
@@ -646,7 +655,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
 
 	pc->chip.dev = dev;
 	pc->chip.ops = &sti_pwm_ops;
-	pc->chip.npwm = pc->cdata->pwm_num_devs;
+	pc->chip.npwm = max(cdata->pwm_num_devs, cdata->cpt_num_devs);
 
 	for (i = 0; i < cdata->cpt_num_devs; i++) {
 		struct sti_cpt_ddata *ddata = &cdata->ddata[i];
-- 
2.43.0

[PATCH 6.7 224/713] tools/resolve_btfids: Refactor set sorting with types from btf_ids.h

[Sasha Levin]

From: Viktor Malik <vmalik@redhat.com>

[ Upstream commit 9707ac4fe2f5bac6406d2403f8b8a64d7b3d8e43 ]

Instead of using magic offsets to access BTF ID set data, leverage types
from btf_ids.h (btf_id_set and btf_id_set8) which define the actual
layout of the data. Thanks to this change, set sorting should also
continue working if the layout changes.

This requires to sync the definition of 'struct btf_id_set8' from
include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync
the rest of the file at the moment, b/c that would require to also sync
multiple dependent headers and we don't need any other defs from
btf_ids.h.

Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/ff7f062ddf6a00815fda3087957c4ce667f50532.1707223196.git.vmalik@redhat.com
Stable-dep-of: 903fad439466 ("tools/resolve_btfids: Fix cross-compilation to non-host endianness")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/resolve_btfids/main.c | 35 ++++++++++++++++++++-------------
 tools/include/linux/btf_ids.h   |  9 +++++++++
 2 files changed, 30 insertions(+), 14 deletions(-)

diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c
index 27a23196d58e1..32634f00abba4 100644
--- a/tools/bpf/resolve_btfids/main.c
+++ b/tools/bpf/resolve_btfids/main.c
@@ -70,6 +70,7 @@
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <errno.h>
+#include <linux/btf_ids.h>
 #include <linux/rbtree.h>
 #include <linux/zalloc.h>
 #include <linux/err.h>
@@ -78,7 +79,7 @@
 #include <subcmd/parse-options.h>
 
 #define BTF_IDS_SECTION	".BTF_ids"
-#define BTF_ID		"__BTF_ID__"
+#define BTF_ID_PREFIX	"__BTF_ID__"
 
 #define BTF_STRUCT	"struct"
 #define BTF_UNION	"union"
@@ -161,7 +162,7 @@ static int eprintf(int level, int var, const char *fmt, ...)
 
 static bool is_btf_id(const char *name)
 {
-	return name && !strncmp(name, BTF_ID, sizeof(BTF_ID) - 1);
+	return name && !strncmp(name, BTF_ID_PREFIX, sizeof(BTF_ID_PREFIX) - 1);
 }
 
 static struct btf_id *btf_id__find(struct rb_root *root, const char *name)
@@ -441,7 +442,7 @@ static int symbols_collect(struct object *obj)
 		 * __BTF_ID__TYPE__vfs_truncate__0
 		 * prefix =  ^
 		 */
-		prefix = name + sizeof(BTF_ID) - 1;
+		prefix = name + sizeof(BTF_ID_PREFIX) - 1;
 
 		/* struct */
 		if (!strncmp(prefix, BTF_STRUCT, sizeof(BTF_STRUCT) - 1)) {
@@ -649,19 +650,18 @@ static int cmp_id(const void *pa, const void *pb)
 static int sets_patch(struct object *obj)
 {
 	Elf_Data *data = obj->efile.idlist;
-	int *ptr = data->d_buf;
 	struct rb_node *next;
 
 	next = rb_first(&obj->sets);
 	while (next) {
-		unsigned long addr, idx;
+		struct btf_id_set8 *set8;
+		struct btf_id_set *set;
+		unsigned long addr, off;
 		struct btf_id *id;
-		int *base;
-		int cnt;
 
 		id   = rb_entry(next, struct btf_id, rb_node);
 		addr = id->addr[0];
-		idx  = addr - obj->efile.idlist_addr;
+		off = addr - obj->efile.idlist_addr;
 
 		/* sets are unique */
 		if (id->addr_cnt != 1) {
@@ -670,14 +670,21 @@ static int sets_patch(struct object *obj)
 			return -1;
 		}
 
-		idx = idx / sizeof(int);
-		base = &ptr[idx] + (id->is_set8 ? 2 : 1);
-		cnt = ptr[idx];
+		if (id->is_set) {
+			set = data->d_buf + off;
+			qsort(set->ids, set->cnt, sizeof(set->ids[0]), cmp_id);
+		} else {
+			set8 = data->d_buf + off;
+			/*
+			 * Make sure id is at the beginning of the pairs
+			 * struct, otherwise the below qsort would not work.
+			 */
+			BUILD_BUG_ON(set8->pairs != &set8->pairs[0].id);
+			qsort(set8->pairs, set8->cnt, sizeof(set8->pairs[0]), cmp_id);
+		}
 
 		pr_debug("sorting  addr %5lu: cnt %6d [%s]\n",
-			 (idx + 1) * sizeof(int), cnt, id->name);
-
-		qsort(base, cnt, id->is_set8 ? sizeof(uint64_t) : sizeof(int), cmp_id);
+			 off, id->is_set ? set->cnt : set8->cnt, id->name);
 
 		next = rb_next(next);
 	}
diff --git a/tools/include/linux/btf_ids.h b/tools/include/linux/btf_ids.h
index 2f882d5cb30f5..72535f00572f6 100644
--- a/tools/include/linux/btf_ids.h
+++ b/tools/include/linux/btf_ids.h
@@ -8,6 +8,15 @@ struct btf_id_set {
 	u32 ids[];
 };
 
+struct btf_id_set8 {
+	u32 cnt;
+	u32 flags;
+	struct {
+		u32 id;
+		u32 flags;
+	} pairs[];
+};
+
 #ifdef CONFIG_DEBUG_INFO_BTF
 
 #include <linux/compiler.h> /* for __PASTE */
-- 
2.43.0

[PATCH 6.7 225/713] tools/resolve_btfids: Fix cross-compilation to non-host endianness

[Sasha Levin]

From: Viktor Malik <vmalik@redhat.com>

[ Upstream commit 903fad4394666bc23975c93fb58f137ce64b5192 ]

The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda9398
("bpf: Fix libelf endian handling in resolv_btfids")).

Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:

    $ sudo ./test_verifier 502 502
    #502/p sleepable fentry accept FAIL
    Failed to load prog 'Invalid argument'!
    bpf_fentry_test1 is not sleepable
    verification time 34 usec
    stack depth 0
    processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
    Summary: 0 PASSED, 0 SKIPPED, 1 FAILED

Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.

Fixes: ef2c6f370a63 ("tools/resolve_btfids: Add support for 8-byte BTF sets")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/7b6bff690919555574ce0f13d2a5996cacf7bf69.1707223196.git.vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/resolve_btfids/main.c | 35 +++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c
index 32634f00abba4..d9520cb826b31 100644
--- a/tools/bpf/resolve_btfids/main.c
+++ b/tools/bpf/resolve_btfids/main.c
@@ -90,6 +90,14 @@
 
 #define ADDR_CNT	100
 
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+# define ELFDATANATIVE	ELFDATA2LSB
+#elif __BYTE_ORDER == __BIG_ENDIAN
+# define ELFDATANATIVE	ELFDATA2MSB
+#else
+# error "Unknown machine endianness!"
+#endif
+
 struct btf_id {
 	struct rb_node	 rb_node;
 	char		*name;
@@ -117,6 +125,7 @@ struct object {
 		int		 idlist_shndx;
 		size_t		 strtabidx;
 		unsigned long	 idlist_addr;
+		int		 encoding;
 	} efile;
 
 	struct rb_root	sets;
@@ -320,6 +329,7 @@ static int elf_collect(struct object *obj)
 {
 	Elf_Scn *scn = NULL;
 	size_t shdrstrndx;
+	GElf_Ehdr ehdr;
 	int idx = 0;
 	Elf *elf;
 	int fd;
@@ -351,6 +361,13 @@ static int elf_collect(struct object *obj)
 		return -1;
 	}
 
+	if (gelf_getehdr(obj->efile.elf, &ehdr) == NULL) {
+		pr_err("FAILED cannot get ELF header: %s\n",
+			elf_errmsg(-1));
+		return -1;
+	}
+	obj->efile.encoding = ehdr.e_ident[EI_DATA];
+
 	/*
 	 * Scan all the elf sections and look for save data
 	 * from .BTF_ids section and symbols.
@@ -681,6 +698,24 @@ static int sets_patch(struct object *obj)
 			 */
 			BUILD_BUG_ON(set8->pairs != &set8->pairs[0].id);
 			qsort(set8->pairs, set8->cnt, sizeof(set8->pairs[0]), cmp_id);
+
+			/*
+			 * When ELF endianness does not match endianness of the
+			 * host, libelf will do the translation when updating
+			 * the ELF. This, however, corrupts SET8 flags which are
+			 * already in the target endianness. So, let's bswap
+			 * them to the host endianness and libelf will then
+			 * correctly translate everything.
+			 */
+			if (obj->efile.encoding != ELFDATANATIVE) {
+				int i;
+
+				set8->flags = bswap_32(set8->flags);
+				for (i = 0; i < set8->cnt; i++) {
+					set8->pairs[i].flags =
+						bswap_32(set8->pairs[i].flags);
+				}
+			}
 		}
 
 		pr_debug("sorting  addr %5lu: cnt %6d [%s]\n",
-- 
2.43.0

[PATCH 6.7 226/713] wifi: iwlwifi: support EHT for WH

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit f51d6431824f0afb9f73d68971d154c47c26b86a ]

sku_cap_11be_enable should be set to true also for WH.

Fixes: e1374ed25324 ("wifi: iwlwifi: Add support for new CNVi (SC)")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240204235836.a6d4097cbaca.I8b00fa7b6226b4116cd91f70fb0b15e79b4dee5a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
index 678c4a071869f..d85cadd8e16cb 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
@@ -2090,7 +2090,7 @@ struct iwl_nvm_data *iwl_get_nvm(struct iwl_trans *trans,
 		!!(mac_flags & NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED);
 	nvm->sku_cap_mimo_disabled =
 		!!(mac_flags & NVM_MAC_SKU_FLAGS_MIMO_DISABLED);
-	if (CSR_HW_RFID_TYPE(trans->hw_rf_id) == IWL_CFG_RF_TYPE_FM)
+	if (CSR_HW_RFID_TYPE(trans->hw_rf_id) >= IWL_CFG_RF_TYPE_FM)
 		nvm->sku_cap_11be_enable = true;
 
 	/* Initialize PHY sku data */
-- 
2.43.0

[PATCH 6.7 227/713] wifi: iwlwifi: properly check if link is active

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit 556c7cd721b5262579ba1710c3b4e7ffdb5573ac ]

Before sending SESSION PROTECTION cmd the driver verifies that the
link for which the cmd is going to be sent is active.
The existing code is checking it only for MLD vifs,
but also the deflink (in non-MLD vifs) needs to be active in order
the have a session protection for it.
Fix this by checking if the link is active also for non-MLD vifs

Fixes: 135065837310 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240205211151.c61820f14ca6.Ibbe0f848f3e71f64313d21642650b6e4bfbe4b39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index 98c64ae315e68..da00ef6e4fbcf 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -706,8 +706,7 @@ static int iwl_mvm_get_session_prot_id(struct iwl_mvm *mvm,
 		 "Invalid link ID for session protection: %u\n", link_id))
 		return -EINVAL;
 
-	if (WARN(ieee80211_vif_is_mld(vif) &&
-		 !(vif->active_links & BIT(link_id)),
+	if (WARN(!mvmvif->link[link_id]->active,
 		 "Session Protection on an inactive link: %u\n", link_id))
 		return -EINVAL;
 
-- 
2.43.0

[PATCH 6.7 228/713] wifi: iwlwifi: mvm: fix erroneous queue index mask

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 2e0e766bd8a7f14f10c3e70b8203c4c1e6d9ec76 ]

When retrieving the queue index ("SCD SSN") from the TX response,
it's currently masked with 0xFFF. However, now that we have queues
longer than 4k, that became wrong, so make the mask depend on the
hardware family.

This fixes an issue where if we get a single frame reclaim while
in the top half of an 8k long queue, we'd reclaim-wrap the queue
twice (once on this and then again on the next non-single reclaim)
which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(),
but could have other negative side effects (such as unmapping a
frame that wasn't transmitted yet, and then taking an IOMMU fault)
as well.

Fixes: 7b3e42ea2ead ("iwlwifi: support multiple tfd queue max sizes for different devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4148a6ef54e0.I733a70f679c25f9f99097a8dcb3a1f8165da6997@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 461f26d9214e4..930742e75c02a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
- * Copyright (C) 2012-2014, 2018-2023 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2024 Intel Corporation
  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
  * Copyright (C) 2016-2017 Intel Deutschland GmbH
  */
@@ -1636,12 +1636,18 @@ static void iwl_mvm_tx_status_check_trigger(struct iwl_mvm *mvm,
  * of the batch. This is why the SSN of the SCD is written at the end of the
  * whole struct at a variable offset. This function knows how to cope with the
  * variable offset and returns the SSN of the SCD.
+ *
+ * For 22000-series and lower, this is just 12 bits. For later, 16 bits.
  */
 static inline u32 iwl_mvm_get_scd_ssn(struct iwl_mvm *mvm,
 				      struct iwl_mvm_tx_resp *tx_resp)
 {
-	return le32_to_cpup((__le32 *)iwl_mvm_get_agg_status(mvm, tx_resp) +
-			    tx_resp->frame_count) & 0xfff;
+	u32 val = le32_to_cpup((__le32 *)iwl_mvm_get_agg_status(mvm, tx_resp) +
+			       tx_resp->frame_count);
+
+	if (mvm->trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210)
+		return val & 0xFFFF;
+	return val & 0xFFF;
 }
 
 static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
-- 
2.43.0

[PATCH 6.7 229/713] wifi: iwlwifi: mvm: don't set the MFP flag for the GTK

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit e35f316bce9e5733c9826120c1838f4c447b2c4c ]

The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.

Fixes: 5c75a208c244 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2f2c602ab3c6.If13b2e2fa532381d985c07df130bee1478046c89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mld-key.c   | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
index ea3e9e9c6e26c..fe4b39b19a612 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
- * Copyright (C) 2022 - 2023 Intel Corporation
+ * Copyright (C) 2022 - 2024 Intel Corporation
  */
 #include <linux/kernel.h>
 #include <net/mac80211.h>
@@ -62,11 +62,13 @@ u32 iwl_mvm_get_sec_flags(struct iwl_mvm *mvm,
 			  struct ieee80211_key_conf *keyconf)
 {
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	bool pairwise = keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE;
+	bool igtk = keyconf->keyidx == 4 || keyconf->keyidx == 5;
 	u32 flags = 0;
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+	if (!pairwise)
 		flags |= IWL_SEC_KEY_FLAG_MCAST_KEY;
 
 	switch (keyconf->cipher) {
@@ -96,12 +98,14 @@ u32 iwl_mvm_get_sec_flags(struct iwl_mvm *mvm,
 	if (!sta && vif->type == NL80211_IFTYPE_STATION)
 		sta = mvmvif->ap_sta;
 
-	/* Set the MFP flag also for an AP interface where the key is an IGTK
-	 * key as in such a case the station would always be NULL
+	/*
+	 * If we are installing an iGTK (in AP or STA mode), we need to tell
+	 * the firmware this key will en/decrypt MGMT frames.
+	 * Same goes if we are installing a pairwise key for an MFP station.
+	 * In case we're installing a groupwise key (which is not an iGTK),
+	 * then, we will not use this key for MGMT frames.
 	 */
-	if ((!IS_ERR_OR_NULL(sta) && sta->mfp) ||
-	    (vif->type == NL80211_IFTYPE_AP &&
-	     (keyconf->keyidx == 4 || keyconf->keyidx == 5)))
+	if ((!IS_ERR_OR_NULL(sta) && sta->mfp && pairwise) || igtk)
 		flags |= IWL_SEC_KEY_FLAG_MFP;
 
 	return flags;
-- 
2.43.0

[PATCH 6.7 230/713] wifi: iwlwifi: mvm: don't set replay counters to 0xff

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d5bd4041cd70faf26fc9a54bd6f172537bbe77f3 ]

The firmware (later) actually uses the values even for keys
that are invalid as far as the host is concerned, later in
rekeying, and then only sets the low 48 bits since the PNs
are only 48 bits over the air. It does, however, compare the
full 64 bits later, obviously causing problems.

Remove the memset and use kzalloc instead to avoid any old
heap data leaking to the firmware. We already init all the
other fields in the struct anyway. This leaves the data set
to zero for any unused fields, so the firmware can look at
them safely even if they're not used right now.

Fixes: 79e561f0f05a ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.462101146fef.I10f3855b99417af4247cff04af78dcbc6cb75c9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index 626e9b94a6624..d99a712e7f44d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -461,12 +461,10 @@ static int iwl_mvm_wowlan_config_rsc_tsc(struct iwl_mvm *mvm,
 		struct wowlan_key_rsc_v5_data data = {};
 		int i;
 
-		data.rsc = kmalloc(sizeof(*data.rsc), GFP_KERNEL);
+		data.rsc = kzalloc(sizeof(*data.rsc), GFP_KERNEL);
 		if (!data.rsc)
 			return -ENOMEM;
 
-		memset(data.rsc, 0xff, sizeof(*data.rsc));
-
 		for (i = 0; i < ARRAY_SIZE(data.rsc->mcast_key_id_map); i++)
 			data.rsc->mcast_key_id_map[i] =
 				IWL_MCAST_KEY_MAP_INVALID;
-- 
2.43.0

[PATCH 6.7 231/713] s390/pai: fix attr_event_free upper limit for pai device drivers

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 225d09d6e5f3870560665a1829d2db79330b4c58 ]

When the device drivers are initialized, a sysfs directory
is created. This contains many attributes which are allocated with
kzalloc(). Should it fail, the memory for the attributes already
created is freed in attr_event_free(). Its second parameter is number
of attribute elements to delete. This parameter is off by one.
When i. e. the 10th attribute fails to get created, attributes
numbered 0 to 9 should be deleted. Currently only attributes
numbered 0 to 8 are deleted.

Fixes: 39d62336f5c1 ("s390/pai: add support for cryptography counters")
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_pai_crypto.c | 2 +-
 arch/s390/kernel/perf_pai_ext.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c
index 39a91b00438a7..fc2dff1e4f796 100644
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@@ -715,7 +715,7 @@ static int __init attr_event_init(void)
 	for (i = 0; i < ARRAY_SIZE(paicrypt_ctrnames); i++) {
 		ret = attr_event_init_one(attrs, i);
 		if (ret) {
-			attr_event_free(attrs, i - 1);
+			attr_event_free(attrs, i);
 			return ret;
 		}
 	}
diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c
index e7013a2e89605..32b467c300603 100644
--- a/arch/s390/kernel/perf_pai_ext.c
+++ b/arch/s390/kernel/perf_pai_ext.c
@@ -604,7 +604,7 @@ static int __init attr_event_init(void)
 	for (i = 0; i < ARRAY_SIZE(paiext_ctrnames); i++) {
 		ret = attr_event_init_one(attrs, i);
 		if (ret) {
-			attr_event_free(attrs, i - 1);
+			attr_event_free(attrs, i);
 			return ret;
 		}
 	}
-- 
2.43.0

[PATCH 6.7 232/713] s390/vdso: drop '-fPIC' from LDFLAGS

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 0628c03934187be33942580e10bb9afcc61adeed ]

'-fPIC' as an option to the linker does not do what it seems like it
should. With ld.bfd, it is treated as '-f PIC', which does not make
sense based on the meaning of '-f':

  -f SHLIB, --auxiliary SHLIB Auxiliary filter for shared object symbol table

When building with ld.lld (currently under review in a GitHub pull
request), it just errors out because '-f' means nothing and neither does
'-fPIC':

  ld.lld: error: unknown argument '-fPIC'

'-fPIC' was blindly copied from CFLAGS when the vDSO stopped being
linked with '$(CC)', it should not be needed. Remove it to clear up the
build failure with ld.lld.

Fixes: 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Link: https://github.com/llvm/llvm-project/pull/75643
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240130-s390-vdso-drop-fpic-from-ldflags-v1-1-094ad104fc55@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/vdso32/Makefile | 2 +-
 arch/s390/kernel/vdso64/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index caec7db6f9668..b12a274cbb473 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -22,7 +22,7 @@ KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS))
 KBUILD_CFLAGS_32 := $(filter-out -mno-pic-data-is-text-relative,$(KBUILD_CFLAGS_32))
 KBUILD_CFLAGS_32 += -m31 -fPIC -shared -fno-common -fno-builtin
 
-LDFLAGS_vdso32.so.dbg += -fPIC -shared -soname=linux-vdso32.so.1 \
+LDFLAGS_vdso32.so.dbg += -shared -soname=linux-vdso32.so.1 \
 	--hash-style=both --build-id=sha1 -melf_s390 -T
 
 $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index e3c9085f8fa72..caa4ebff8a193 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -26,7 +26,7 @@ KBUILD_AFLAGS_64 += -m64
 KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
 KBUILD_CFLAGS_64 := $(filter-out -mno-pic-data-is-text-relative,$(KBUILD_CFLAGS_64))
 KBUILD_CFLAGS_64 += -m64 -fPIC -fno-common -fno-builtin
-ldflags-y := -fPIC -shared -soname=linux-vdso64.so.1 \
+ldflags-y := -shared -soname=linux-vdso64.so.1 \
 	     --hash-style=both --build-id=sha1 -T
 
 $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
-- 
2.43.0

[PATCH 6.7 233/713] selftests: forwarding: Add missing config entries

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 4acf4e62cd572b0c806035046b3698f5585ab821 ]

The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.

In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.

Tested the resulting configuration using virtme-ng as follows:

 # vng -b -f tools/testing/selftests/net/forwarding/config
 # vng --user root
 (within the VM:)
 # make -C tools/testing/selftests TARGETS=net/forwarding run_tests

Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: f0ddf15f0a74 ("selftests: forwarding: Add missing multicast routing config entries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/forwarding/config | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
index 697994a9278bb..ba23435145827 100644
--- a/tools/testing/selftests/net/forwarding/config
+++ b/tools/testing/selftests/net/forwarding/config
@@ -6,14 +6,42 @@ CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NET_VRF=m
 CONFIG_BPF_SYSCALL=y
 CONFIG_CGROUP_BPF=y
+CONFIG_DUMMY=m
+CONFIG_IPV6=y
+CONFIG_IPV6_GRE=m
+CONFIG_MACVLAN=m
 CONFIG_NET_ACT_CT=m
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_MPLS=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_SAMPLE=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_TUNNEL_KEY=m
 CONFIG_NET_ACT_VLAN=m
 CONFIG_NET_CLS_FLOWER=m
 CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPIP=m
+CONFIG_NET_SCH_ETS=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_ACT_GACT=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_TC_SKB_EXT=y
+CONFIG_NET_TEAM=y
+CONFIG_NET_TEAM_MODE_LOADBALANCE=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_FLOW_TABLE=m
+CONFIG_NF_TABLES=m
 CONFIG_VETH=m
 CONFIG_NAMESPACES=y
 CONFIG_NET_NS=y
+CONFIG_VXLAN=m
+CONFIG_XFRM_USER=m
-- 
2.43.0

[PATCH 6.7 234/713] selftests: forwarding: Add missing multicast routing config entries

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit f0ddf15f0a74c27eb4b2271a90e69948acc3fa2c ]

The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.

Fix by adding the required config entries.

Fixes: 6d4efada3b82 ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/forwarding/config | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
index ba23435145827..8d7a1a004b7c3 100644
--- a/tools/testing/selftests/net/forwarding/config
+++ b/tools/testing/selftests/net/forwarding/config
@@ -9,6 +9,13 @@ CONFIG_CGROUP_BPF=y
 CONFIG_DUMMY=m
 CONFIG_IPV6=y
 CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 CONFIG_MACVLAN=m
 CONFIG_NET_ACT_CT=m
 CONFIG_NET_ACT_MIRRED=m
-- 
2.43.0

[PATCH 6.7 235/713] ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 17ef8efc00b34918b966388b2af0993811895a8c ]

As discussed in the past (commit 2d3916f31891 ("ipv6: fix skb drops
in igmp6_event_query() and igmp6_event_report()")) I think the
synchronize_net() call in ipv6_mc_down() is not needed.

Under load, synchronize_net() can last between 200 usec and 5 ms.

KASAN seems to agree as well.

Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/mcast.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index bc6e0a0bad3c1..76ee1615ff2a0 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2719,7 +2719,6 @@ void ipv6_mc_down(struct inet6_dev *idev)
 	/* Should stop work after group drop. or we will
 	 * start work again in mld_ifc_event()
 	 */
-	synchronize_net();
 	mld_query_stop_work(idev);
 	mld_report_stop_work(idev);
 
-- 
2.43.0

[PATCH 6.7 236/713] arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 04bd6411f506357fd1faedc2b2156e7ef206aa9a ]

The cbas node is used to describe base detection functionality in the
ChromeOS EC, which is used for units that have a detachable keyboard and
thus rely on this functionality to switch between tablet and laptop
mode.

Despite the original commit having added the cbas node to the
mt8183-kukui.dtsi, not all machines that include it are detachables. In
fact all machines that include from mt8183-kukui-jacuzzi.dtsi are either
clamshells (ie normal laptops) or convertibles, meaning the keyboard can
be flipped but not detached. The detection for the keyboard getting
flipped is handled by the driver bound to the keyboard-controller node
in the EC.

Move the base detection node from the base kukui dtsi to the dtsis where
all machines are detachables, and thus actually make use of the node.

Fixes: 4fa8492d1e5b ("arm64: dts: mt8183: add cbas node under cros_ec")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240116-mt8183-kukui-cbas-remove-v3-1-055e21406e86@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi  | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi        | 4 ----
 4 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a11adeb29b1f2..0d3c7b8162ff0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -373,6 +373,10 @@ pen_eject {
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e53a4f..e73113cb51f53 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -340,6 +340,10 @@ touch_pin_reset: pin_reset {
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index d5f41c6c98814..181da69d18f46 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -344,6 +344,10 @@ rst_pin {
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 7881a27be0297..49a1c3ccb0041 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -935,10 +935,6 @@ usbc_extcon: extcon0 {
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
-- 
2.43.0

[PATCH 6.7 237/713] arm64: dts: mediatek: mt7986: fix reference to PWM in fan node

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 7865abbbdf1e1ee57a0bb8ec83079f8840c16854 ]

This fixes typo and resolves following validation error:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm-fan: pwms: [[54, 0, 10000], [0]] is too long
        from schema $id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#

Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130816.4932-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e501216be..e1ec2cccf4444 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@ fan: pwm-fan {
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
-- 
2.43.0

[PATCH 6.7 238/713] arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit bb69d19c649669f700149df309245cd925612f7c ]

According to the "inside-secure,safexcel-eip97" binding "clock-names" is
required only if there are two clocks specified. If present the first
name must by "core".

Name "infra_eip97_ck" is invalid and was probably just a typo. Drop it.

Fixes: ecc5287cfe53 ("arm64: dts: mt7986: add crypto related device nodes")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116132411.7665-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049953c..a7d9c3246a875 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -234,7 +234,6 @@ crypto: crypto@10320000 {
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
-- 
2.43.0

[PATCH 6.7 239/713] arm64: dts: mediatek: mt7986: fix SPI bus width properties

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 4e7dc18a753cec130b06f1ddbae10ea9dcfb1723 ]

This fixes SPI setup and resolves following validation errors:
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtb: spi_nand@0: Unevaluated properties are not allowed ('spi-rx-buswidth', 'spi-tx-buswidth' were unexpected)
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dtb: spi_nand@0: Unevaluated properties are not allowed ('spi-rx-buswidth', 'spi-tx-buswidth' were unexpected)
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#

Fixes: 885e153ed7c1 ("arm64: dts: mt7986: add spi related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130952.5099-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 4 ++--
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca254e8..bcb3ebb85d708 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -241,8 +241,8 @@ spi_nand: spi_nand@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442e386..48fe50e671779 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -156,8 +156,8 @@ spi_nand: spi_nand@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
-- 
2.43.0

[PATCH 6.7 240/713] arm64: dts: mediatek: mt7986: fix SPI nodename

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit bbe266c70e1343ee3e71ca31138141b3da265085 ]

This fixes following validation errors:
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtb: spi_nand@0: $nodename:0: 'spi_nand@0' does not match '^(flash|.*sram|nand)(@.*)?$'
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dtb: spi_nand@0: $nodename:0: 'spi_nand@0' does not match '^(flash|.*sram|nand)(@.*)?$'
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#

Fixes: 885e153ed7c1 ("arm64: dts: mt7986: add spi related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130952.5099-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 3 ++-
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index bcb3ebb85d708..2f884c24f1eb4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -237,7 +237,8 @@ &spi0 {
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 48fe50e671779..57dcaeef31d7f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -152,7 +152,8 @@ &spi0 {
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-- 
2.43.0

[PATCH 6.7 241/713] arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 0b721691f0c80af682d0ef3aa4a177c23d41b072 ]

PWM is not a clock provider and its binding doesn't specify
"#clock-cells" property.

This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm@10048000: '#clock-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/pwm/mediatek,mt2712-pwm.yaml#

Fixes: eabb04df46c6 ("arm64: dts: mt7986: add PWM")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240101182040.28538-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index a7d9c3246a875..7b6591509c54d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -242,7 +242,6 @@ crypto: crypto@10320000 {
 		pwm: pwm@10048000 {
 			compatible = "mediatek,mt7986-pwm";
 			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
 			#pwm-cells = <2>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-- 
2.43.0

[PATCH 6.7 242/713] arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit d993daff5962b2dd08f32a83bb1c0e5fa75732ea ]

MT7986's Infrastructure System Configuration Controller includes reset
controller. It can reset blocks as specified in the
include/dt-bindings/reset/mt7986-resets.h . Add #reset-cells so it can
be referenced properly.

This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: infracfg@10001000: '#reset-cells' is a required property
        from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#

Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240101182040.28538-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 7b6591509c54d..d974739eae1c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -153,6 +153,7 @@ infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
-- 
2.43.0

[PATCH 6.7 243/713] arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 9b49cabe631b0a25aaf8fc2ba81b5b9ea6ff01b7 ]

The commit adding the ChromeOS EC to the Asurada Devicetree mistakenly
added a base detection node. While tablet mode detection is supported by
CrosEC and used by Hayato, it is done through the cros-ec-keyb driver.
The base detection node, which is handled by the hid-google-hammer
driver, also provides tablet mode detection but by checking base
attachment status on the CrosEC, which is not supported for Asurada.

Hence, remove the unused CrosEC base detection node for Asurada.

Fixes: eb188a2aaa82 ("arm64: dts: mediatek: asurada: Add ChromeOS EC")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240207-mt8192-asurada-cbas-remove-v1-1-04cb65951975@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index f2281250ac35d..02ce05bc151ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -1336,10 +1336,6 @@ cros_ec: ec@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
-- 
2.43.0

[PATCH 6.7 244/713] arm64: dts: mediatek: mt8192: fix vencoder clock name

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@collabora.com>

[ Upstream commit 76aac0f2a46847ed4a7a4fdd848dd66023c19ad1 ]

Clock name should be `venc_sel` as per binding.
Fix the warning message :
arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dtb: vcodec@17020000: clock-names:0: 'venc_sel' was expected
        from schema $id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#

Fixes: aa8f3711fc87 ("arm64: dts: mt8192: Add H264 venc device node")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-4-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5dbbf..f1fc14e53f8c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1770,7 +1770,7 @@ vcodec_enc: vcodec@17020000 {
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
-- 
2.43.0

[PATCH 6.7 245/713] arm64: dts: mediatek: mt8186: fix VENC power domain clocks

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@collabora.com>

[ Upstream commit 09860910c589a3bb3b5268ff6f704cf6b18ada73 ]

The larb clock is in fact a subsys clock, so it must be prefixed by
'subsys-' to be correctly identified in the driver.

Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-6-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 2fec6fd1c1a71..ee0feadbf9619 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1061,7 +1061,7 @@ power-domain@MT8186_POWER_DOMAIN_VENC {
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
-- 
2.43.0

[PATCH 6.7 246/713] arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 99d100e00144bc01b49a697f4bc4398f2f7e7ce4 ]

This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240122132357.31264-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 1 +
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c46682150e502..26cb3268ccbaa 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -75,6 +75,7 @@ led-1 {
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 2dc1bdc74e212..5c26021fc4cf1 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@ key-wps {
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
-- 
2.43.0

[PATCH 6.7 247/713] can: m_can: Start/Cancel polling timer together with interrupts

[Sasha Levin]

From: Markus Schneider-Pargmann <msp@baylibre.com>

[ Upstream commit a163c5761019b94258ca655b27b46e82657fd6f5 ]

Interrupts are enabled/disabled in more places than just m_can_start()
and m_can_stop(). Couple the polling timer with enabling/disabling of
all interrupts to achieve equivalent behavior.

Cc: Judith Mendez <jm@ti.com>
Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/m_can/m_can.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 16ecc11c7f62a..2395b1225cc8a 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -418,6 +418,13 @@ static void m_can_config_endisable(struct m_can_classdev *cdev, bool enable)
 
 static inline void m_can_enable_all_interrupts(struct m_can_classdev *cdev)
 {
+	if (!cdev->net->irq) {
+		dev_dbg(cdev->dev, "Start hrtimer\n");
+		hrtimer_start(&cdev->hrtimer,
+			      ms_to_ktime(HRTIMER_POLL_INTERVAL_MS),
+			      HRTIMER_MODE_REL_PINNED);
+	}
+
 	/* Only interrupt line 0 is used in this driver */
 	m_can_write(cdev, M_CAN_ILE, ILE_EINT0);
 }
@@ -425,6 +432,11 @@ static inline void m_can_enable_all_interrupts(struct m_can_classdev *cdev)
 static inline void m_can_disable_all_interrupts(struct m_can_classdev *cdev)
 {
 	m_can_write(cdev, M_CAN_ILE, 0x0);
+
+	if (!cdev->net->irq) {
+		dev_dbg(cdev->dev, "Stop hrtimer\n");
+		hrtimer_cancel(&cdev->hrtimer);
+	}
 }
 
 /* Retrieve internal timestamp counter from TSCV.TSC, and shift it to 32-bit
@@ -1417,12 +1429,6 @@ static int m_can_start(struct net_device *dev)
 
 	m_can_enable_all_interrupts(cdev);
 
-	if (!dev->irq) {
-		dev_dbg(cdev->dev, "Start hrtimer\n");
-		hrtimer_start(&cdev->hrtimer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS),
-			      HRTIMER_MODE_REL_PINNED);
-	}
-
 	return 0;
 }
 
@@ -1577,11 +1583,6 @@ static void m_can_stop(struct net_device *dev)
 {
 	struct m_can_classdev *cdev = netdev_priv(dev);
 
-	if (!dev->irq) {
-		dev_dbg(cdev->dev, "Stop hrtimer\n");
-		hrtimer_cancel(&cdev->hrtimer);
-	}
-
 	/* disable all interrupts */
 	m_can_disable_all_interrupts(cdev);
 
-- 
2.43.0

[PATCH 6.7 248/713] wifi: iwlwifi: mvm: Fix the listener MAC filter flags

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 4cdb86487e3eaddb4b3a7df30ae709e810aac84b ]

One of the flags was from the wrong API.

Fixes: 9be162a7b670 ("wifi: iwlwifi: mvm: add support for the new MAC CTXT command")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.a338c30ec4e9.Ic2813cdeba4443c692d462fc4859392f069d7e33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c
index f313a8d771e42..ad78c69cc6cb7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c
@@ -167,7 +167,7 @@ static int iwl_mvm_mld_mac_ctxt_cmd_listener(struct iwl_mvm *mvm,
 	iwl_mvm_mld_mac_ctxt_cmd_common(mvm, vif, &cmd, action);
 
 	cmd.filter_flags = cpu_to_le32(MAC_CFG_FILTER_PROMISC |
-				       MAC_FILTER_IN_CONTROL_AND_MGMT |
+				       MAC_CFG_FILTER_ACCEPT_CONTROL_AND_MGMT |
 				       MAC_CFG_FILTER_ACCEPT_BEACON |
 				       MAC_CFG_FILTER_ACCEPT_PROBE_REQ |
 				       MAC_CFG_FILTER_ACCEPT_GRP);
-- 
2.43.0

[PATCH 6.7 249/713] bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly

[Sasha Levin]

From: Yonghong Song <yonghong.song@linux.dev>

[ Upstream commit 178c54666f9c4d2f49f2ea661d0c11b52f0ed190 ]

Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}()
helper calls. This is to prevent deadlock for the following cases:
  - there is a prog (prog-A) calling bpf_spin_{lock,unlock}().
  - there is a tracing program (prog-B), e.g., fentry, attached
    to bpf_spin_lock() and/or bpf_spin_unlock().
  - prog-B calls bpf_spin_{lock,unlock}().
For such a case, when prog-A calls bpf_spin_{lock,unlock}(),
a deadlock will happen.

The related source codes are below in kernel/bpf/helpers.c:
  notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
  notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
notrace is supposed to prevent fentry prog from attaching to
bpf_spin_{lock,unlock}().

But actually this is not the case and fentry prog can successfully
attached to bpf_spin_lock(). Siddharth Chintamaneni reported
the issue in [1]. The following is the macro definition for
above BPF_CALL_1:
  #define BPF_CALL_x(x, name, ...)                                               \
        static __always_inline                                                 \
        u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__));   \
        typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
        u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));         \
        u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))          \
        {                                                                      \
                return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
        }                                                                      \
        static __always_inline                                                 \
        u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))

  #define BPF_CALL_1(name, ...)   BPF_CALL_x(1, name, __VA_ARGS__)

The notrace attribute is actually applied to the static always_inline function
____bpf_spin_{lock,unlock}(). The actual callback function
bpf_spin_{lock,unlock}() is not marked with notrace, hence
allowing fentry prog to attach to two helpers, and this
may cause the above mentioned deadlock. Siddharth Chintamaneni
actually has a reproducer in [2].

To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which
will add notrace attribute to the original function instead of
the hidden always_inline function and this fixed the problem.

  [1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/
  [2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/

Fixes: d83525ca62cf ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/filter.h | 21 ++++++++++++---------
 kernel/bpf/helpers.c   |  4 ++--
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h
index a4953fafc8cb8..02e043bd93b1a 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -547,24 +547,27 @@ static inline bool insn_is_zext(const struct bpf_insn *insn)
 	__BPF_MAP(n, __BPF_DECL_ARGS, __BPF_N, u64, __ur_1, u64, __ur_2,       \
 		  u64, __ur_3, u64, __ur_4, u64, __ur_5)
 
-#define BPF_CALL_x(x, name, ...)					       \
+#define BPF_CALL_x(x, attr, name, ...)					       \
 	static __always_inline						       \
 	u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__));   \
 	typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
-	u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));	       \
-	u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))	       \
+	attr u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));    \
+	attr u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))     \
 	{								       \
 		return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
 	}								       \
 	static __always_inline						       \
 	u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))
 
-#define BPF_CALL_0(name, ...)	BPF_CALL_x(0, name, __VA_ARGS__)
-#define BPF_CALL_1(name, ...)	BPF_CALL_x(1, name, __VA_ARGS__)
-#define BPF_CALL_2(name, ...)	BPF_CALL_x(2, name, __VA_ARGS__)
-#define BPF_CALL_3(name, ...)	BPF_CALL_x(3, name, __VA_ARGS__)
-#define BPF_CALL_4(name, ...)	BPF_CALL_x(4, name, __VA_ARGS__)
-#define BPF_CALL_5(name, ...)	BPF_CALL_x(5, name, __VA_ARGS__)
+#define __NOATTR
+#define BPF_CALL_0(name, ...)	BPF_CALL_x(0, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_1(name, ...)	BPF_CALL_x(1, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_2(name, ...)	BPF_CALL_x(2, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_3(name, ...)	BPF_CALL_x(3, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_4(name, ...)	BPF_CALL_x(4, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_5(name, ...)	BPF_CALL_x(5, __NOATTR, name, __VA_ARGS__)
+
+#define NOTRACE_BPF_CALL_1(name, ...)	BPF_CALL_x(1, notrace, name, __VA_ARGS__)
 
 #define bpf_ctx_range(TYPE, MEMBER)						\
 	offsetof(TYPE, MEMBER) ... offsetofend(TYPE, MEMBER) - 1
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index ce4729ef1ad2d..b912d055a8470 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -334,7 +334,7 @@ static inline void __bpf_spin_lock_irqsave(struct bpf_spin_lock *lock)
 	__this_cpu_write(irqsave_flags, flags);
 }
 
-notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
+NOTRACE_BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
 {
 	__bpf_spin_lock_irqsave(lock);
 	return 0;
@@ -357,7 +357,7 @@ static inline void __bpf_spin_unlock_irqrestore(struct bpf_spin_lock *lock)
 	local_irq_restore(flags);
 }
 
-notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
+NOTRACE_BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
 {
 	__bpf_spin_unlock_irqrestore(lock);
 	return 0;
-- 
2.43.0

[PATCH 6.7 250/713] bpf: don't infer PTR_TO_CTX for programs with unnamed context type

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 879bbe7aa4afa80acf72a1cad7f52416ea78c52d ]

For program types that don't have named context type name (e.g., BPF
iterator programs or tracepoint programs), ctx_tname will be a non-NULL
empty string. For such programs it shouldn't be possible to have
PTR_TO_CTX argument for global subprogs based on type name alone.
arg:ctx tag is the only way to have PTR_TO_CTX passed into global
subprog for such program types.

Fix this loophole, which currently would assume PTR_TO_CTX whenever
user uses a pointer to anonymous struct as an argument to their global
subprogs. This happens in practice with the following (quite common, in
practice) approach:

typedef struct { /* anonymous */
    int x;
} my_type_t;

int my_subprog(my_type_t *arg) { ... }

User's intent is to have PTR_TO_MEM argument for `arg`, but verifier
will complain about expecting PTR_TO_CTX.

This fix also closes unintended s390x-specific KPROBE handling of
PTR_TO_CTX case. Selftest change is necessary to accommodate this.

Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c                              |  3 +++
 .../bpf/progs/test_global_func_ctx_args.c     | 19 +++++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 15d71d2986d3a..a17da40f65d31 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -5665,6 +5665,9 @@ btf_get_prog_ctx_type(struct bpf_verifier_log *log, const struct btf *btf,
 		bpf_log(log, "Please fix kernel include/linux/bpf_types.h\n");
 		return NULL;
 	}
+	/* program types without named context types work only with arg:ctx tag */
+	if (ctx_tname[0] == '\0')
+		return false;
 	/* only compare that prog's ctx type name is the same as
 	 * kernel expects. No need to compare field by field.
 	 * It's ok for bpf prog to do:
diff --git a/tools/testing/selftests/bpf/progs/test_global_func_ctx_args.c b/tools/testing/selftests/bpf/progs/test_global_func_ctx_args.c
index 7faa8eef0598b..144d30e654ad2 100644
--- a/tools/testing/selftests/bpf/progs/test_global_func_ctx_args.c
+++ b/tools/testing/selftests/bpf/progs/test_global_func_ctx_args.c
@@ -26,6 +26,23 @@ int kprobe_typedef_ctx(void *ctx)
 	return kprobe_typedef_ctx_subprog(ctx);
 }
 
+/* s390x defines:
+ *
+ * typedef user_pt_regs bpf_user_pt_regs_t;
+ * typedef struct { ... } user_pt_regs;
+ *
+ * And so "canonical" underlying struct type is anonymous.
+ * So on s390x only valid ways to have PTR_TO_CTX argument in global subprogs
+ * are:
+ *   - bpf_user_pt_regs_t *ctx (typedef);
+ *   - struct bpf_user_pt_regs_t *ctx (backwards compatible struct hack);
+ *   - void *ctx __arg_ctx (arg:ctx tag)
+ *
+ * Other architectures also allow using underlying struct types (e.g.,
+ * `struct pt_regs *ctx` for x86-64)
+ */
+#ifndef bpf_target_s390
+
 #define pt_regs_struct_t typeof(*(__PT_REGS_CAST((struct pt_regs *)NULL)))
 
 __weak int kprobe_struct_ctx_subprog(pt_regs_struct_t *ctx)
@@ -40,6 +57,8 @@ int kprobe_resolved_ctx(void *ctx)
 	return kprobe_struct_ctx_subprog(ctx);
 }
 
+#endif
+
 /* this is current hack to make this work on old kernels */
 struct bpf_user_pt_regs_t {};
 
-- 
2.43.0

[PATCH 6.7 251/713] arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 5dd227ccfb9568935bdaf82bc1893b36457dd4d3 ]

The SLPI is powered by the Low Power Island power rails. Fix the incorrect
assignment.

Fixes: 74588aada59a ("arm64: dts: qcom: sdm845: add SLPI remoteproc")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231220-topic-sdm845_slpi_lcxmx-v1-1-db7c72ef99ae@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 9e594d21ecd80..88ed543de81bf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3353,8 +3353,8 @@ slpi_pas: remoteproc@5c00000 {
 
 			qcom,qmp = <&aoss_qmp>;
 
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
+			power-domains = <&rpmhpd SDM845_LCX>,
+					<&rpmhpd SDM845_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
-- 
2.43.0

[PATCH 6.7 252/713] soc: qcom: llcc: Check return value on Broadcast_OR reg read

[Sasha Levin]

From: Unnathi Chalicheemala <quic_uchalich@quicinc.com>

[ Upstream commit ceeaddc19a90039861564d8e1078b778a8f95101 ]

Commit c72ca343f911 ("soc: qcom: llcc: Add v4.1 HW version support")
introduced a new 4.1 if statement in llcc_update_act_ctrl() without
considering that ret might be overwritten. So, add return value check
after Broadcast_OR register read in llcc_update_act_ctrl().

Fixes: c72ca343f911 ("soc: qcom: llcc: Add v4.1 HW version support")
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240212183515.433873-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/llcc-qcom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 57d47dcf11b92..1b7e921d45a11 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -766,6 +766,8 @@ static int llcc_update_act_ctrl(u32 sid,
 	ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
 				      slice_status, !(slice_status & status),
 				      0, LLCC_STATUS_READ_DELAY);
+	if (ret)
+		return ret;
 
 	if (drv_data->version >= LLCC_VERSION_4_1_0_0)
 		ret = regmap_write(drv_data->bcast_regmap, act_clear_reg,
-- 
2.43.0

[PATCH 6.7 253/713] ARM: dts: qcom: msm8974: correct qfprom node size

[Sasha Levin]

From: Craig Tatlor <ctatlor97@gmail.com>

[ Upstream commit 724c4bf0e4bf81dba77736afb93964c986c3c123 ]

The qfprom actually is bigger than 0x1000, so adjust the reg.

Note that the non-ECC-corrected qfprom can be found at 0xfc4b8000
(-0x4000). The current reg points to the ECC-corrected qfprom block
which should have equivalent values at all offsets compared to the
non-corrected version.

[luca@z3ntu.xyz: extract to standalone patch and adjust for review
comments]

Fixes: c59ffb519357 ("arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes")
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8974-qfprom-v3-1-26c424160334@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 0bc2e66d15b15..f41cc4b4b518b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -1226,7 +1226,7 @@ restart@fc4ab000 {
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-- 
2.43.0

[PATCH 6.7 254/713] arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit a00d4a98af44e025891e97c490b2545368a25e08 ]

The ssusb power domains currently don't list any clocks, despite
depending on some, and thus rely on the bootloader leaving the required
clocks on in order to work.

When booting with the upstream arm64 defconfig, the power domain
controller will defer probe until modules have loaded since it has an
indirect dependency on CONFIG_MTK_CMDQ, which is configured as a module.
However at the point where modules are loaded, unused clocks are also
disabled, causing the ssusb domains to fail to be enabled and
consequently the controller to fail probe:

mtk-power-controller 10006000.syscon:power-controller: /soc/syscon@10006000/power-controller/power-domain@4: failed to power on domain: -110
mtk-power-controller: probe of 10006000.syscon:power-controller failed with error -110

Add the missing clocks for the ssusb power domains so that they can
successfully probe without relying on the bootloader state.

Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-1-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8186.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index ee0feadbf9619..4fd25f0f313d2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -931,11 +931,17 @@ power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP {
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
-- 
2.43.0

[PATCH 6.7 255/713] arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 1af98c3e53da5a8f627855cecd68b017e753ffd3 ]

The mtu3 usb controllers don't list the xhci clock, though they require
it, and thus rely on the bootloader leaving it on in order to work.

When booting with the upstream arm64 defconfig, the usb controllers will
defer probe until modules have loaded since they have an indirect
dependency on CONFIG_MTK_CMDQ, which is configured as a module. However
at the point where modules are loaded, unused clocks are also disabled,
causing the usb controllers to probe without the xhci clock enabled and
fail to probe:

mtu3 11201000.usb: clks of sts1 are not stable!
mtu3 11201000.usb: device enable failed -110
mtu3 11201000.usb: mtu3 hw init failed:-110
mtu3 11201000.usb: failed to initialize gadget
mtu3: probe of 11201000.usb failed with error -110

(and same for the one at 11281000)

Add the missing clock for the usb controllers so that they can
successfully probe without relying on the bootloader state.

Fixes: f6c3e61c5486 ("arm64: dts: mediatek: mt8186: Add MTU3 nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-2-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8186.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 4fd25f0f313d2..84ec6c1aa12b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1536,8 +1536,9 @@ ssusb0: usb@11201000 {
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1601,8 +1602,9 @@ ssusb1: usb@11281000 {
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
-- 
2.43.0

[PATCH 6.7 256/713] arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay

[Sasha Levin]

From: Roger Quadros <rogerq@kernel.org>

[ Upstream commit 8ada14cafc5e185c668198617cd1ab4f1d8d325a ]

Add the overlay dtbo file to a Makefile target so it can be
picked by the dtbs_install command.

Fixes: b8690ed3d1d1 ("arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-1-70bae3e91597@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 77a347f9f47d5..c1513f0fa47fd 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board-rocktech-rk101-panel.dtbo
 
 # Boards with J7200 SoC
 k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
-- 
2.43.0

[PATCH 6.7 257/713] cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3093fa33539b54db77171d2919352ad4f044a1c5 ]

It is still possible to compile-test a kernel without CONFIG_COMMON_CLK
for some ancient ARM boards or other architectures, but this causes a
link failure in the qcom-cpufreq-hw driver:

ERROR: modpost: "devm_clk_hw_register" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "devm_of_clk_add_hw_provider" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "of_clk_hw_onecell_get" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!

Add a Kconfig dependency here to make sure this always work. Apparently
this bug has been in the kernel for a while without me running into it
on randconfig builds as COMMON_CLK is almost always enabled.

I have cross-checked by building an allmodconfig kernel with COMMON_CLK
disabled, which showed no other driver having this problem.

Fixes: 4370232c727b ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/Kconfig.arm | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index f911606897b8d..a0ebad77666e3 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -173,6 +173,7 @@ config ARM_QCOM_CPUFREQ_NVMEM
 config ARM_QCOM_CPUFREQ_HW
 	tristate "QCOM CPUFreq HW driver"
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on COMMON_CLK
 	help
 	  Support for the CPUFreq HW driver.
 	  Some QCOM chipsets have a HW engine to offload the steps
-- 
2.43.0

[PATCH 6.7 258/713] wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit cb5942b77c05d54310a0420cac12935e9b6aa21c ]

wilc_netdev_cleanup currently triggers a KASAN warning, which can be
observed on interface registration error path, or simply by
removing the module/unbinding device from driver:

echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind

==================================================================
BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc
Read of size 4 at addr c54d1ce8 by task sh/86

CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117
Hardware name: Atmel SAMA5
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x34/0x58
 dump_stack_lvl from print_report+0x154/0x500
 print_report from kasan_report+0xac/0xd8
 kasan_report from wilc_netdev_cleanup+0x508/0x5cc
 wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec
 wilc_bus_remove from spi_remove+0x8c/0xac
 spi_remove from device_release_driver_internal+0x434/0x5f8
 device_release_driver_internal from unbind_store+0xbc/0x108
 unbind_store from kernfs_fop_write_iter+0x398/0x584
 kernfs_fop_write_iter from vfs_write+0x728/0xf88
 vfs_write from ksys_write+0x110/0x1e4
 ksys_write from ret_fast_syscall+0x0/0x1c

[...]

Allocated by task 1:
 kasan_save_track+0x30/0x5c
 __kasan_kmalloc+0x8c/0x94
 __kmalloc_node+0x1cc/0x3e4
 kvmalloc_node+0x48/0x180
 alloc_netdev_mqs+0x68/0x11dc
 alloc_etherdev_mqs+0x28/0x34
 wilc_netdev_ifc_init+0x34/0x8ec
 wilc_cfg80211_init+0x690/0x910
 wilc_bus_probe+0xe0/0x4a0
 spi_probe+0x158/0x1b0
 really_probe+0x270/0xdf4
 __driver_probe_device+0x1dc/0x580
 driver_probe_device+0x60/0x140
 __driver_attach+0x228/0x5d4
 bus_for_each_dev+0x13c/0x1a8
 bus_add_driver+0x2a0/0x608
 driver_register+0x24c/0x578
 do_one_initcall+0x180/0x310
 kernel_init_freeable+0x424/0x484
 kernel_init+0x20/0x148
 ret_from_fork+0x14/0x28

Freed by task 86:
 kasan_save_track+0x30/0x5c
 kasan_save_free_info+0x38/0x58
 __kasan_slab_free+0xe4/0x140
 kfree+0xb0/0x238
 device_release+0xc0/0x2a8
 kobject_put+0x1d4/0x46c
 netdev_run_todo+0x8fc/0x11d0
 wilc_netdev_cleanup+0x1e4/0x5cc
 wilc_bus_remove+0xc8/0xec
 spi_remove+0x8c/0xac
 device_release_driver_internal+0x434/0x5f8
 unbind_store+0xbc/0x108
 kernfs_fop_write_iter+0x398/0x584
 vfs_write+0x728/0xf88
 ksys_write+0x110/0x1e4
 ret_fast_syscall+0x0/0x1c
 [...]

David Mosberger-Tan initial investigation [1] showed that this
use-after-free is due to netdevice unregistration during vif list
traversal. When unregistering a net device, since the needs_free_netdev has
been set to true during registration, the netdevice object is also freed,
and as a consequence, the corresponding vif object too, since it is
attached to it as private netdevice data. The next occurrence of the loop
then tries to access freed vif pointer to the list to move forward in the
list.

Fix this use-after-free thanks to two mechanisms:
- navigate in the list with list_for_each_entry_safe, which allows to
  safely modify the list as we go through each element. For each element,
  remove it from the list with list_del_rcu
- make sure to wait for RCU grace period end after each vif removal to make
  sure it is safe to free the corresponding vif too (through
  unregister_netdev)

Since we are in a RCU "modifier" path (not a "reader" path), and because
such path is expected not to be concurrent to any other modifier (we are
using the vif_mutex lock), we do not need to use RCU list API, that's why
we can benefit from list_for_each_entry_safe.

[1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

Fixes: 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240212-wilc_rework_deinit-v1-1-9203ae56c27f@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/microchip/wilc1000/netdev.c  | 28 +++++--------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index d6602ced44f50..87fce5f41803d 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -890,8 +890,7 @@ static const struct net_device_ops wilc_netdev_ops = {
 
 void wilc_netdev_cleanup(struct wilc *wilc)
 {
-	struct wilc_vif *vif;
-	int srcu_idx, ifc_cnt = 0;
+	struct wilc_vif *vif, *vif_tmp;
 
 	if (!wilc)
 		return;
@@ -901,32 +900,19 @@ void wilc_netdev_cleanup(struct wilc *wilc)
 		wilc->firmware = NULL;
 	}
 
-	srcu_idx = srcu_read_lock(&wilc->srcu);
-	list_for_each_entry_rcu(vif, &wilc->vif_list, list) {
+	list_for_each_entry_safe(vif, vif_tmp, &wilc->vif_list, list) {
+		mutex_lock(&wilc->vif_mutex);
+		list_del_rcu(&vif->list);
+		wilc->vif_num--;
+		mutex_unlock(&wilc->vif_mutex);
+		synchronize_srcu(&wilc->srcu);
 		if (vif->ndev)
 			unregister_netdev(vif->ndev);
 	}
-	srcu_read_unlock(&wilc->srcu, srcu_idx);
 
 	wilc_wfi_deinit_mon_interface(wilc, false);
 	destroy_workqueue(wilc->hif_workqueue);
 
-	while (ifc_cnt < WILC_NUM_CONCURRENT_IFC) {
-		mutex_lock(&wilc->vif_mutex);
-		if (wilc->vif_num <= 0) {
-			mutex_unlock(&wilc->vif_mutex);
-			break;
-		}
-		vif = wilc_get_wl_to_vif(wilc);
-		if (!IS_ERR(vif))
-			list_del_rcu(&vif->list);
-
-		wilc->vif_num--;
-		mutex_unlock(&wilc->vif_mutex);
-		synchronize_srcu(&wilc->srcu);
-		ifc_cnt++;
-	}
-
 	wilc_wlan_cfg_deinit(wilc);
 	wlan_deinit_locks(wilc);
 	wiphy_unregister(wilc->wiphy);
-- 
2.43.0

[PATCH 6.7 259/713] arm64: dts: ti: k3-am62-main: disable usb lpm

[Sasha Levin]

From: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>

[ Upstream commit 9c99b337a8755a09df7735d4324ae26a6eca6261 ]

AM62 USB works with some devices, while failing to operate with others.

[  560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[  560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[  574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110
[  574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
[  574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110

This seems to be related to LPM (Link Power Management), and disabling it
turns USB into reliable working state.

As per AM62 reference manual:

> 4.8.2.1 USB2SS Unsupported Features
>
> The following features are not supported on this family of devices:
> ...
> - USB 2.0 ECN: Link Power Management (LPM)
> ...

Fixes: 2240f96cf3cd ("arm64: dts: ti: k3-am62-main: Add support for USB")
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20240209130213.38908-1-andrejs.cainikovs@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index e5c64c86d1d5a..c1ace4a376d17 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -623,6 +623,8 @@ usb0: usb@31000000 {
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -646,6 +648,8 @@ usb1: usb@31100000 {
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
-- 
2.43.0

[PATCH 6.7 260/713] ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit e18afcb7b2a12b635ac10081f943fcf84ddacc51 ]

After unregistering the CPU idle device, the memory associated with
it is not freed, leading to a memory leak:

unreferenced object 0xffff896282f6c000 (size 1024):
  comm "swapper/0", pid 1, jiffies 4294893170
  hex dump (first 32 bytes):
    00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 8836a742):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffff9972f3b3>] acpi_processor_power_init+0xf3/0x1c0
    [<ffffffff9972d263>] __acpi_processor_start+0xd3/0xf0
    [<ffffffff9972d2bc>] acpi_processor_start+0x2c/0x50
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff9aee4acb>] acpi_processor_driver_init+0x3b/0xc0
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300
    [<ffffffff9ae7c4b0>] kernel_init_freeable+0x320/0x470
    [<ffffffff99b231f6>] kernel_init+0x16/0x1b0
    [<ffffffff99042e6d>] ret_from_fork+0x2d/0x50

Fix this by freeing the CPU idle device after unregistering it.

Fixes: 3d339dcbb56d ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/processor_idle.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 55437f5e0c3ae..bd6a7857ce058 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1430,6 +1430,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr)
 		acpi_processor_registered--;
 		if (acpi_processor_registered == 0)
 			cpuidle_unregister_driver(&acpi_idle_driver);
+
+		kfree(dev);
 	}
 
 	pr->flags.power_setup_done = 0;
-- 
2.43.0

[PATCH 6.7 261/713] bus: tegra-aconnect: Update dependency to ARCH_TEGRA

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 4acd21a45c1446277e2abaece97d7fa7c2e692a9 ]

Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just Tegra210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes Tegra210 you don't get
this driver.

Fixes: 46a88534afb59 ("bus: Add support for Tegra ACONNECT")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index e6742998f372c..d5e7fa9173a16 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -186,11 +186,12 @@ config SUNXI_RSB
 
 config TEGRA_ACONNECT
 	tristate "Tegra ACONNECT Bus Driver"
-	depends on ARCH_TEGRA_210_SOC
+	depends on ARCH_TEGRA
 	depends on OF && PM
 	help
 	  Driver for the Tegra ACONNECT bus which is used to interface with
-	  the devices inside the Audio Processing Engine (APE) for Tegra210.
+	  the devices inside the Audio Processing Engine (APE) for
+	  Tegra210 and later.
 
 config TEGRA_GMI
 	tristate "Tegra Generic Memory Interface bus driver"
-- 
2.43.0

[PATCH 6.7 262/713] iommu/amd: Mark interrupt as managed

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 0feda94c868d396fac3b3cb14089d2d989a07c72 ]

On many systems that have an AMD IOMMU the following sequence of
warnings is observed during bootup.

```
pci 0000:00:00.2  can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
```

This series of events happens because of the IOMMU initialization
sequence order and the lack of _PRT entries for the IOMMU.

During initialization the IOMMU driver first enables the PCI device
using pci_enable_device().  This will call acpi_pci_irq_enable()
which will check if the interrupt is declared in a PCI routing table
(_PRT) entry. According to the PCI spec [1] these routing entries
are only required under PCI root bridges:
	The _PRT object is required under all PCI root bridges

The IOMMU is directly connected to the root complex, so there is no
parent bridge to look for a _PRT entry. The first warning is emitted
since no entry could be found in the hierarchy. The second warning is
then emitted because the interrupt hasn't yet been configured to any
value.  The pin was configured in pci_read_irq() but the byte in
PCI_INTERRUPT_LINE return 0xff which means "Unknown".

After that sequence of events pci_enable_msi() is called and this
will allocate an interrupt.

That is both of these warnings are totally harmless because the IOMMU
uses MSI for interrupts.  To avoid even trying to probe for a _PRT
entry mark the IOMMU as IRQ managed. This avoids both warnings.

Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd/init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 64bcf3df37ee5..7f65f3ecb231e 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -2068,6 +2068,9 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
 	/* Prevent binding other PCI device drivers to IOMMU devices */
 	iommu->dev->match_driver = false;
 
+	/* ACPI _PRT won't have an IRQ for IOMMU */
+	iommu->dev->irq_managed = 1;
+
 	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
 			      &iommu->cap);
 
-- 
2.43.0

[PATCH 6.7 263/713] wifi: brcmsmac: avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit e1ea6db35fc3ba5ff063f097385e9f7a88c25356 ]

An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   64 |                         brcms_init_timer(physhim->wl, (void (*)(void *))fn,
      |                                                       ^~~~~~~~~~~~~~~~~~~~

Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.

Fixes: d89a4c80601d ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c   | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c  | 5 ++---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h  | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
index ccc621b8ed9f2..4a1fe982a948e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -383,8 +383,9 @@ struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp)
 	return sh;
 }
 
-static void wlc_phy_timercb_phycal(struct brcms_phy *pi)
+static void wlc_phy_timercb_phycal(void *ptr)
 {
+	struct brcms_phy *pi = ptr;
 	uint delay = 5;
 
 	if (PHY_PERICAL_MPHASE_PENDING(pi)) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
index a0de5db0cd646..b723817915365 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
@@ -57,12 +57,11 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim)
 }
 
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name)
 {
 	return (struct wlapi_timer *)
-			brcms_init_timer(physhim->wl, (void (*)(void *))fn,
-					 arg, name);
+			brcms_init_timer(physhim->wl, fn, arg, name);
 }
 
 void wlapi_free_timer(struct wlapi_timer *t)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
index dd8774717adee..27d0934e600ed 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
@@ -131,7 +131,7 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim);
 
 /* PHY to WL utility functions */
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name);
 void wlapi_free_timer(struct wlapi_timer *t);
 void wlapi_add_timer(struct wlapi_timer *t, uint ms, int periodic);
-- 
2.43.0

[PATCH 6.7 264/713] arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 584a327c5cffc36369b2a8953d9448826240f1ac ]

Bindings allow a "wake", not "enable", GPIO.  Schematics also use WAKE
name for the pin:

  sdm845-db845c.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Fixes: 4a657c264b78 ("arm64: dts: qcom: db845c: Enable PCIe controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7e7bf3fb3be63..0a891a0122446 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -580,7 +580,7 @@ &mss_pil {
 &pcie0 {
 	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
-- 
2.43.0

[PATCH 6.7 265/713] arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit af6f6778d34cb40e60368e288767f674cc0c5f60 ]

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 7c38989d0f7a ("arm64: dts: qcom: sm8150: correct PCIe wake-gpios")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 3221478663ac6..a662f09fdbe19 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1878,7 +1878,7 @@ pcie0: pci@1c00000 {
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1972,7 +1972,7 @@ pcie1: pci@1c08000 {
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
-- 
2.43.0

[PATCH 6.7 266/713] arm64: dts: qcom: sm8150: correct PCIe wake-gpios

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 7c38989d0f7a35c83e7c4781271d42662903fa8d ]

Bindings allow a "wake", not "enable", GPIO.  Schematics also use WAKE
name for the pin:

  sa8155p-adp.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index a662f09fdbe19..2678eac1ec794 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1879,7 +1879,7 @@ pcie0: pci@1c00000 {
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
-- 
2.43.0

[PATCH 6.7 267/713] powercap: dtpm_cpu: Fix error check against freq_qos_add_request()

[Sasha Levin]

From: Daniel Lezcano <daniel.lezcano@linaro.org>

[ Upstream commit b50155cb0d609437236c88201206267835c6f965 ]

The caller of the function freq_qos_add_request() checks again a non
zero value but freq_qos_add_request() can return '1' if the request
already exists. Therefore, the setup function fails while the QoS
request actually did not failed.

Fix that by changing the check against a negative value like all the
other callers of the function.

Fixes: 0e8f68d7f0485 ("Add CPU energy model based support")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/powercap/dtpm_cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c
index 9193c3b8edebe..ae7ee611978ba 100644
--- a/drivers/powercap/dtpm_cpu.c
+++ b/drivers/powercap/dtpm_cpu.c
@@ -219,7 +219,7 @@ static int __dtpm_cpu_setup(int cpu, struct dtpm *parent)
 	ret = freq_qos_add_request(&policy->constraints,
 				   &dtpm_cpu->qos_req, FREQ_QOS_MAX,
 				   pd->table[pd->nr_perf_states - 1].frequency);
-	if (ret)
+	if (ret < 0)
 		goto out_dtpm_unregister;
 
 	cpufreq_cpu_put(policy);
-- 
2.43.0

[PATCH 6.7 268/713] net: ena: Remove ena_select_queue

[Sasha Levin]

From: Kamal Heib <kheib@redhat.com>

[ Upstream commit 78e886ba2b549945ecada055ee0765f0ded5707a ]

Avoid the following warnings by removing the ena_select_queue() function
and rely on the net core to do the queue selection, The issue happen
when an skb received from an interface with more queues than ena is
forwarded to the ena interface.

[ 1176.159959] eth0 selects TX queue 11, but real number of TX queues is 8
[ 1176.863976] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1180.767877] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1188.703742] eth0 selects TX queue 14, but real number of TX queues is 8

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index c44c44e26ddfe..4fa27c9a33974 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -3238,22 +3238,6 @@ static netdev_tx_t ena_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 }
 
-static u16 ena_select_queue(struct net_device *dev, struct sk_buff *skb,
-			    struct net_device *sb_dev)
-{
-	u16 qid;
-	/* we suspect that this is good for in--kernel network services that
-	 * want to loop incoming skb rx to tx in normal user generated traffic,
-	 * most probably we will not get to this
-	 */
-	if (skb_rx_queue_recorded(skb))
-		qid = skb_get_rx_queue(skb);
-	else
-		qid = netdev_pick_tx(dev, skb, NULL);
-
-	return qid;
-}
-
 static void ena_config_host_info(struct ena_com_dev *ena_dev, struct pci_dev *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -3424,7 +3408,6 @@ static const struct net_device_ops ena_netdev_ops = {
 	.ndo_open		= ena_open,
 	.ndo_stop		= ena_close,
 	.ndo_start_xmit		= ena_start_xmit,
-	.ndo_select_queue	= ena_select_queue,
 	.ndo_get_stats64	= ena_get_stats64,
 	.ndo_tx_timeout		= ena_tx_timeout,
 	.ndo_change_mtu		= ena_change_mtu,
-- 
2.43.0

[PATCH 6.7 269/713] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0

[Sasha Levin]

From: Bhavya Kapoor <b-kapoor@ti.com>

[ Upstream commit 566feddd2ba5e29d9ccab36d6508592ae563f275 ]

WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies
under wkup_pmx2 for J7200. Thus, modify pinmux for both
of them.

Fixes: 3709ea7f960e ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-2-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts  | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index cee2b4b0eb87d..53594c5fb8e8f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -91,24 +91,25 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
 };
 
 &wkup_pmx0 {
+};
+
+&wkup_pmx2 {
 	mcu_uart0_pins_default: mcu-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
-			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
-			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
-			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
 		>;
 	};
 
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
-			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
 		>;
 	};
-};
 
-&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
-- 
2.43.0

[PATCH 6.7 270/713] arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0

[Sasha Levin]

From: Bhavya Kapoor <b-kapoor@ti.com>

[ Upstream commit 0fa8b0e2083d333e4854b9767fb893f924e70ae5 ]

Clock-frequency property is already present in mcu_uart0 node of the
k3-j7200-mcu-wakeup.dtsi file. Thus, remove redundant clock-frequency
property from mcu_uart0 node.

Fixes: 3709ea7f960e ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-3-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 53594c5fb8e8f..7a0c599f2b1c3 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -211,7 +211,6 @@ &mcu_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
-	clock-frequency = <96000000>;
 };
 
 &main_uart0 {
-- 
2.43.0

[PATCH 6.7 271/713] arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0

[Sasha Levin]

From: Bhavya Kapoor <b-kapoor@ti.com>

[ Upstream commit 28e5b74d524050008edf415f20a3e38907b8f176 ]

Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the Common Proc Board through SoM, but CTS and RTS signal lines
are not brought on the board. Thus, remove pinmux for CTS and RTS
signal lines for wkup_uart0 in J721S2.

Fixes: f5e9ee0b354a ("arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-4-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c6b85bbf9a179..1ba1f53c72d03 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -190,8 +190,6 @@ J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */
 &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
-- 
2.43.0

[PATCH 6.7 272/713] arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0

[Sasha Levin]

From: Bhavya Kapoor <b-kapoor@ti.com>

[ Upstream commit d29a6cf980572d8cf7b63935716fca663e2610f0 ]

Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the J784S4 EVM from SoC, but CTS and RTS signal lines are not
brought on the EVM. Thus, remove pinmux for CTS and RTS signal
lines for wkup_uart0 in J784S4.

Fixes: 6fa5d37a2f34 ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-5-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f1f4c8634ab69..50210700fdc8e 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -331,8 +331,6 @@ &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
-- 
2.43.0

[PATCH 6.7 273/713] arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level

[Sasha Levin]

From: Andrew Davis <afd@ti.com>

[ Upstream commit 3b6345e3fcf4c93a79f396121cd0e6f98f04da13 ]

SDHCI nodes defined in the top-level AM64 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20231117163339.89952-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: 379c7752bbd0 ("arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi                 | 2 ++
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi          | 1 +
 arch/arm64/boot/dts/ti/k3-am642-evm.dts                  | 6 ++++--
 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 1 +
 arch/arm64/boot/dts/ti/k3-am642-sk.dts                   | 4 +++-
 arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts   | 1 -
 arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi           | 1 +
 7 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0be642bc1b86d..c3300c36fdbcb 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -623,6 +623,7 @@ sdhci0: mmc@fa10000 {
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -641,6 +642,7 @@ sdhci1: mmc@fa00000 {
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index f87f09d83c956..b8f844f667afc 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -211,6 +211,7 @@ flash@0 {
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 4dba18941015d..256606be56fef 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -487,17 +487,19 @@ eeprom@0 {
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e96842d82..53b64e55413f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@ &main_uart1 {
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index f29c8a9b59ba7..bffbd234f715a 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -439,6 +439,7 @@ &mcu_gpio0 {
 };
 
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -458,9 +459,10 @@ wlcore: wlcore@2 {
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index d95d80076a427..55102d35cecc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -425,7 +425,6 @@ &sdhci1 {
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index d82d4a98306a7..6c785eff7d2ff 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -219,6 +219,7 @@ partitions {
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
-- 
2.43.0

[PATCH 6.7 274/713] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC

[Sasha Levin]

From: Judith Mendez <jm@ti.com>

[ Upstream commit 379c7752bbd0e81654544a896dd19c19ebb6faba ]

Update MMC0/MMC1 OTAP/ITAP values according to the datasheet
[0], refer to Table 7-68 for MMC0 and Table 7-77 for MMC1.

[0] https://www.ti.com/lit/ds/symlink/am6442.pdf

Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-5-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index c3300c36fdbcb..45042216e5b89 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -623,6 +623,9 @@ sdhci0: mmc@fa10000 {
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -635,12 +638,16 @@ sdhci1: mmc@fa00000 {
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
 		status = "disabled";
 	};
-- 
2.43.0

[PATCH 6.7 275/713] arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow

[Sasha Levin]

From: Hsin-Te Yuan <yuanhsinte@google.com>

[ Upstream commit ef569d5db50e7edd709e482157769a5b3c367e22 ]

The external output reset signal was originally disabled and sent from
firmware. However, an unfixed bug in the firmware on tomato prevents
the signal from being sent, causing the device to fail to boot. To fix
this, enable external output reset signal to allow the device to reboot
normally.

Fixes: 5eb2e303ec6b ("arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240124-send-upstream-v3-1-5097c9862a73@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 4 ++++
 3 files changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371b6de..a82d716f10d44 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -23,3 +23,7 @@ &sound {
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce6e6f..2fe20e0dad836 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -43,3 +43,7 @@ &sound {
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b99da..dd294ca98194c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -44,3 +44,7 @@ &sound {
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
-- 
2.43.0

[PATCH 6.7 276/713] arm64: dts: ti: Add common1 register space for AM65x SoC

[Sasha Levin]

From: Devarsh Thakkar <devarsht@ti.com>

[ Upstream commit 1a5010eade10b409d353b770d97b548b0fbdf5d7 ]

This adds common1 register space for AM65x SoC which is using TI's Keystone
display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml

Fixes: fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240216062426.4170528-3-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 29048d6577cf6..fa2304a7cb1ec 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -1013,9 +1013,10 @@ dss: dss@4a00000 {
 		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
 		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
 		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
-		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		      <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */
+		      <0x0 0x04a01000 0x0 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			"ovr1", "ovr2", "vp1", "vp2";
+			"ovr1", "ovr2", "vp1", "vp2", "common1";
 
 		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
 
-- 
2.43.0

[PATCH 6.7 277/713] arm64: dts: ti: Add common1 register space for AM62x SoC

[Sasha Levin]

From: Devarsh Thakkar <devarsht@ti.com>

[ Upstream commit 7d8ee2c3b8a2aabb9ce75795bad20773bfe1ba13 ]

This adds common1 register space for AM62x SoC which is using TI's Keystone
display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml

Fixes: 8ccc1073c7bb ("arm64: dts: ti: k3-am62-main: Add node for DSS")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240216062426.4170528-4-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index c1ace4a376d17..2f318c5287581 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -757,9 +757,10 @@ dss: dss@30200000 {
 		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
 		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
 		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
-		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		      <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			    "ovr1", "ovr2", "vp1", "vp2";
+			    "ovr1", "ovr2", "vp1", "vp2", "common1";
 		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 186 6>,
 			 <&dss_vp1_clk>,
-- 
2.43.0

[PATCH 6.7 278/713] firmware: arm_scmi: Fix double free in SMC transport cleanup path

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit f1d71576d2c9ec8fdb822173fa7f3de79475e9bd ]

When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:

    | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
    | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
    | arm-scmi firmware:scmi: unable to communicate with SCMI
    | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    | Mem abort info:
    |   ESR = 0x0000000096000004
    |   EC = 0x25: DABT (current EL), IL = 32 bits
    |   SET = 0, FnV = 0
    |   EA = 0, S1PTW = 0
    |   FSC = 0x04: level 0 translation fault
    | Data abort info:
    |   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    |   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    |   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
    | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
    | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
    | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
    | Modules linked in:
    | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
    | Hardware name: FVP Base RevC (DT)
    | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
    | pc : smc_chan_free+0x3c/0x6c
    | lr : smc_chan_free+0x3c/0x6c
    | Call trace:
    |  smc_chan_free+0x3c/0x6c
    |  idr_for_each+0x68/0xf8
    |  scmi_cleanup_channels.isra.0+0x2c/0x58
    |  scmi_probe+0x434/0x734
    |  platform_probe+0x68/0xd8
    |  really_probe+0x110/0x27c
    |  __driver_probe_device+0x78/0x12c
    |  driver_probe_device+0x3c/0x118
    |  __driver_attach+0x74/0x128
    |  bus_for_each_dev+0x78/0xe0
    |  driver_attach+0x24/0x30
    |  bus_add_driver+0xe4/0x1e8
    |  driver_register+0x60/0x128
    |  __platform_driver_register+0x28/0x34
    |  scmi_driver_init+0x84/0xc0
    |  do_one_initcall+0x78/0x33c
    |  kernel_init_freeable+0x2b8/0x51c
    |  kernel_init+0x24/0x130
    |  ret_from_fork+0x10/0x20
    | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
    | ---[ end trace 0000000000000000 ]---

Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.

This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558062da ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/smc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index 7611e9665038d..39936e1dd30e9 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -214,6 +214,13 @@ static int smc_chan_free(int id, void *p, void *data)
 	struct scmi_chan_info *cinfo = p;
 	struct scmi_smc *scmi_info = cinfo->transport_info;
 
+	/*
+	 * Different protocols might share the same chan info, so a previous
+	 * smc_chan_free call might have already freed the structure.
+	 */
+	if (!scmi_info)
+		return 0;
+
 	/* Ignore any possible further reception on the IRQ path */
 	if (scmi_info->irq > 0)
 		free_irq(scmi_info->irq, scmi_info);
-- 
2.43.0

[PATCH 6.7 279/713] arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS

[Sasha Levin]

From: Jai Luthra <j-luthra@ti.com>

[ Upstream commit 90a67583171f213711de662fab9f8d24a2d291a9 ]

The INTR module for DMASS1 (CSI specific DMASS) is outside the currently
available ranges, as it starts at 0x4e400000. So fix the ranges property
to enable programming the interrupts correctly.

Fixes: 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of SoCs")
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240220-am62p_csi-v2-1-3e71d9945571@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am62p.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
index 84ffe7b9dcaf3..4f22b5d9fb9f0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -71,7 +71,7 @@ cbass_main: bus@f0000 {
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
-			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
-- 
2.43.0

[PATCH 6.7 280/713] wifi: wilc1000: revert reset line logic flip

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit f3ec643947634bed41b97bd56b248f7c78498eab ]

This reverts commit fcf690b0b47494df51d214db5c5a714a400b0257.

When using a wilc1000 chip over a spi bus, users can optionally define a
reset gpio and a chip enable gpio. The reset line of wilc1000 is active
low, so to hold the chip in reset, a low (physical) value must be applied.

The corresponding device tree binding documentation was introduced by
commit f31ee3c0a555 ("wilc1000: Document enable-gpios and reset-gpios
properties") and correctly indicates that the reset line is an active-low
signal. The corresponding driver part, brought by commit ec031ac4792c
("wilc1000: Add reset/enable GPIO support to SPI driver") was applying the
correct logic. But commit fcf690b0b474 ("wifi: wilc1000: use correct
sequence of RESET for chip Power-UP/Down") eventually flipped this logic
and started misusing the gpiod APIs, applying an inverted logic when
powering up/down the chip (for example, setting the reset line to a logic
"1" during power up, which in fact asserts the reset line when device tree
describes the reset line as GPIO_ACTIVE_LOW). As a consequence, any
platform currently using the driver in SPI mode must use a faulty reset
line description in device tree, or else chip will be maintained in reset
and will not even allow to bring up the chip.

Fix reset line usage by inverting back the gpiod APIs usage, setting the
reset line to the logic value "0" when powering the chip, and the logic
value "1" when powering off the chip.

Fixes: fcf690b0b474 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240217-wilc_1000_reset_line-v2-1-b216f433d7d5@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/spi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 77b4cdff73c37..4cf8586ed55ae 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -192,11 +192,11 @@ static void wilc_wlan_power(struct wilc *wilc, bool on)
 		/* assert ENABLE: */
 		gpiod_set_value(gpios->enable, 1);
 		mdelay(5);
-		/* assert RESET: */
-		gpiod_set_value(gpios->reset, 1);
-	} else {
 		/* deassert RESET: */
 		gpiod_set_value(gpios->reset, 0);
+	} else {
+		/* assert RESET: */
+		gpiod_set_value(gpios->reset, 1);
 		/* deassert ENABLE: */
 		gpiod_set_value(gpios->enable, 0);
 	}
-- 
2.43.0

[PATCH 6.7 281/713] ARM: dts: arm: realview: Fix development chip ROM compatible value

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3baa4c5143d65ebab2de0d99a395e5f4f1f46608 ]

When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete.  In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.

Fix this by using the modern "mtd-rom" compatible value instead.

Fixes: 5c3f5edbe0a1dff3 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index efed325af88d2..d99bac02232b3 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@ pb1176_serial3: serial@1010f000 {
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
-- 
2.43.0

[PATCH 6.7 282/713] memory: tegra: Correct DLA client names

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit 51d915cbeef4c7a154f5d810b1e10d8125f2b0cc ]

Some of the names for the Tegra234 DLA clients are not unique and do not
align with the name of the client ID definitions. Therefore, it is not
possible to determine the exact DLA client from messages that print the
client name. Fix this by correcting the DLA memory client names for
Tegra234 to align with the name of the corresponding memory client ID.

Note that although the client names are also used by the interconnect
framework, interconnect support for the DLA clients has not been added
and so this issue does not impact the interconnect support.

Fixes: 5cd24ca0985f ("memory: tegra: Add DLA clients for Tegra234")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240220124430.19072-1-jonathanh@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/tegra/tegra234.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c
index abff87f917cb4..b8a7af2d36c11 100644
--- a/drivers/memory/tegra/tegra234.c
+++ b/drivers/memory/tegra/tegra234.c
@@ -121,7 +121,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1RDB,
-		.name = "dla0rdb",
+		.name = "dla1rdb",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -407,7 +407,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1RDB1,
-		.name = "dla0rdb1",
+		.name = "dla1rdb1",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -417,7 +417,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1WRB,
-		.name = "dla0wrb",
+		.name = "dla1wrb",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -699,7 +699,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1RDA,
-		.name = "dla0rda",
+		.name = "dla1rda",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -709,7 +709,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1FALRDB,
-		.name = "dla0falrdb",
+		.name = "dla1falrdb",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -719,7 +719,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1WRA,
-		.name = "dla0wra",
+		.name = "dla1wra",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -729,7 +729,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1FALWRB,
-		.name = "dla0falwrb",
+		.name = "dla1falwrb",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
@@ -917,7 +917,7 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
 		},
 	}, {
 		.id = TEGRA234_MEMORY_CLIENT_DLA1RDA1,
-		.name = "dla0rda1",
+		.name = "dla1rda1",
 		.sid = TEGRA234_SID_NVDLA1,
 		.regs = {
 			.sid = {
-- 
2.43.0

[PATCH 6.7 283/713] wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit 479146078a21ff2015cdd4e0467cba0559911915 ]

Driver should setting correct phy mode to firmware when in legacy mode.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 9c0e397537acf..2e52f9281ab73 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -1460,12 +1460,10 @@ mt7925_mcu_sta_phy_tlv(struct sk_buff *skb,
 	struct tlv *tlv;
 	u8 af = 0, mm = 0;
 
-	if (!sta->deflink.ht_cap.ht_supported && !sta->deflink.he_6ghz_capa.capa)
-		return;
-
 	tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_PHY, sizeof(*phy));
 	phy = (struct sta_rec_phy *)tlv;
 	phy->phy_type = mt76_connac_get_phy_mode_v2(mvif->phy->mt76, vif, chandef->chan->band, sta);
+	phy->basic_rate = cpu_to_le16((u16)vif->bss_conf.basic_rates);
 	if (sta->deflink.ht_cap.ht_supported) {
 		af = sta->deflink.ht_cap.ampdu_factor;
 		mm = sta->deflink.ht_cap.ampdu_density;
-- 
2.43.0

[PATCH 6.7 284/713] wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band

[Sasha Levin]

From: "rong.yan" <rong.yan@mediatek.com>

[ Upstream commit 243cecc857735344473ea33a713cd5c2ec1fe347 ]

Driver should configure basic rate and phy mode for SAP mode.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: rong.yan <rong.yan@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt76_connac_mcu.h    |  3 +++
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c     | 13 ++++++++++---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.h     |  3 ++-
 3 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index 0563b1b22f485..c2241b068635f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -925,6 +925,9 @@ enum {
 	PHY_TYPE_INDEX_NUM
 };
 
+#define HR_DSSS_ERP_BASIC_RATE			GENMASK(3, 0)
+#define OFDM_BASIC_RATE				(BIT(6) | BIT(8) | BIT(10))
+
 #define PHY_TYPE_BIT_HR_DSSS			BIT(PHY_TYPE_HR_DSSS_INDEX)
 #define PHY_TYPE_BIT_ERP			BIT(PHY_TYPE_ERP_INDEX)
 #define PHY_TYPE_BIT_OFDM			BIT(PHY_TYPE_OFDM_INDEX)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 2e52f9281ab73..322198b20c0d3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -2047,9 +2047,9 @@ mt7925_mcu_bss_basic_tlv(struct sk_buff *skb,
 	struct cfg80211_chan_def *chandef = ctx ? &ctx->def : &phy->chandef;
 	enum nl80211_band band = chandef->chan->band;
 	struct mt76_connac_bss_basic_tlv *basic_req;
-	u8 idx, basic_phy;
 	struct tlv *tlv;
 	int conn_type;
+	u8 idx;
 
 	tlv = mt76_connac_mcu_add_tlv(skb, UNI_BSS_INFO_BASIC, sizeof(*basic_req));
 	basic_req = (struct mt76_connac_bss_basic_tlv *)tlv;
@@ -2060,8 +2060,10 @@ mt7925_mcu_bss_basic_tlv(struct sk_buff *skb,
 
 	basic_req->phymode_ext = mt7925_get_phy_mode_ext(phy, vif, band, sta);
 
-	basic_phy = mt76_connac_get_phy_mode_v2(phy, vif, band, sta);
-	basic_req->nonht_basic_phy = cpu_to_le16(basic_phy);
+	if (band == NL80211_BAND_2GHZ)
+		basic_req->nonht_basic_phy = cpu_to_le16(PHY_TYPE_ERP_INDEX);
+	else
+		basic_req->nonht_basic_phy = cpu_to_le16(PHY_TYPE_OFDM_INDEX);
 
 	memcpy(basic_req->bssid, vif->bss_conf.bssid, ETH_ALEN);
 	basic_req->phymode = mt76_connac_get_phy_mode(phy, vif, band, sta);
@@ -2165,6 +2167,11 @@ mt7925_mcu_bss_bmc_tlv(struct sk_buff *skb, struct mt792x_phy *phy,
 
 	bmc = (struct bss_rate_tlv *)tlv;
 
+	if (band == NL80211_BAND_2GHZ)
+		bmc->basic_rate = cpu_to_le16(HR_DSSS_ERP_BASIC_RATE);
+	else
+		bmc->basic_rate = cpu_to_le16(OFDM_BASIC_RATE);
+
 	bmc->short_preamble = (band == NL80211_BAND_2GHZ);
 	bmc->bc_fixed_rate = idx;
 	bmc->mc_fixed_rate = idx;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
index 3c41e21303b1f..0218fd2a0eb01 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
@@ -334,7 +334,8 @@ struct bss_req_hdr {
 struct bss_rate_tlv {
 	__le16 tag;
 	__le16 len;
-	u8 __rsv1[4];
+	u8 __rsv1[2];
+	__le16 basic_rate;
 	__le16 bc_trans;
 	__le16 mc_trans;
 	u8 short_preamble;
-- 
2.43.0

[PATCH 6.7 285/713] wifi: mt76: mt7925: fix mcu query command fail

[Sasha Levin]

From: Hao Zhang <hao.zhang@mediatek.com>

[ Upstream commit 2f475cb63eb304bdbb58c9b07b0547ca6c343012 ]

Apply query command type properly to make the chip send the response back.
Otherwise, we may see the command timeout in driver side.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 322198b20c0d3..8474b6d215dc3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -2850,12 +2850,16 @@ int mt7925_mcu_fill_message(struct mt76_dev *mdev, struct sk_buff *skb,
 	if (cmd & __MCU_CMD_FIELD_UNI) {
 		uni_txd = (struct mt76_connac2_mcu_uni_txd *)txd;
 		uni_txd->len = cpu_to_le16(skb->len - sizeof(uni_txd->txd));
-		uni_txd->option = MCU_CMD_UNI_EXT_ACK;
 		uni_txd->cid = cpu_to_le16(mcu_cmd);
 		uni_txd->s2d_index = MCU_S2D_H2N;
 		uni_txd->pkt_type = MCU_PKT_ID;
 		uni_txd->seq = seq;
 
+		if (cmd & __MCU_CMD_FIELD_QUERY)
+			uni_txd->option = MCU_CMD_UNI_QUERY_ACK;
+		else
+			uni_txd->option = MCU_CMD_UNI_EXT_ACK;
+
 		goto exit;
 	}
 
-- 
2.43.0

[PATCH 6.7 286/713] wifi: mt76: mt7925: fix wmm queue mapping

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit 9d89edb576e385267f40193bd3776157101a504a ]

Firmware uses access class index (ACI) for wmm parameters update,
so convert mac80211 queue to ACI in mt7925_conf_tx().

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7925/main.c  | 21 ++++++++++++++++++-
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   |  2 +-
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index aa918b9b0469f..b6aa792e5511f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -1274,6 +1274,25 @@ mt7925_channel_switch_beacon(struct ieee80211_hw *hw,
 	mt792x_mutex_release(dev);
 }
 
+static int
+mt7925_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+	       unsigned int link_id, u16 queue,
+	       const struct ieee80211_tx_queue_params *params)
+{
+	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
+	static const u8 mq_to_aci[] = {
+		    [IEEE80211_AC_VO] = 3,
+		    [IEEE80211_AC_VI] = 2,
+		    [IEEE80211_AC_BE] = 0,
+		    [IEEE80211_AC_BK] = 1,
+	};
+
+	/* firmware uses access class index */
+	mvif->queue_params[mq_to_aci[queue]] = *params;
+
+	return 0;
+}
+
 static int
 mt7925_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		struct ieee80211_bss_conf *link_conf)
@@ -1397,7 +1416,7 @@ const struct ieee80211_ops mt7925_ops = {
 	.add_interface = mt7925_add_interface,
 	.remove_interface = mt792x_remove_interface,
 	.config = mt7925_config,
-	.conf_tx = mt792x_conf_tx,
+	.conf_tx = mt7925_conf_tx,
 	.configure_filter = mt7925_configure_filter,
 	.bss_info_changed = mt7925_bss_info_changed,
 	.start_ap = mt7925_start_ap,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 8474b6d215dc3..b21fe015a701b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -895,7 +895,7 @@ int mt7925_mcu_set_tx(struct mt792x_dev *dev, struct ieee80211_vif *vif)
 
 		e = (struct edca *)tlv;
 		e->set = WMM_PARAM_SET;
-		e->queue = ac + mvif->mt76.wmm_idx * MT76_CONNAC_MAX_WMM_SETS;
+		e->queue = ac;
 		e->aifs = q->aifs;
 		e->txop = cpu_to_le16(q->txop);
 
-- 
2.43.0

[PATCH 6.7 287/713] wifi: mt76: connac: add beacon protection support for mt7996

[Sasha Levin]

From: Allen Ye <allen.ye@mediatek.com>

[ Upstream commit eb80e02b2c03141460749d3800126e2cdb674c9e ]

Implement beacon protection feature for mt7996 chipsets, and also do
some cleanup on the set key routine.

Co-developed-by: Rudra Shahi <rudra.shahi@mediatek.com>
Signed-off-by: Rudra Shahi <rudra.shahi@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 47916693ec7c ("wifi: mt76: mt7925: fix WoW failed in encrypted mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  24 +++
 .../net/wireless/mediatek/mt76/mt7996/main.c  |  12 +-
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 139 +++++++++++++-----
 .../net/wireless/mediatek/mt76/mt7996/mcu.h   |  17 +++
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |   3 +-
 5 files changed, 153 insertions(+), 42 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index c2241b068635f..cc6cdbc664290 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -416,6 +416,14 @@ struct sta_rec_he_6g_capa {
 	u8 rsv[2];
 } __packed;
 
+struct sta_rec_pn_info {
+	__le16 tag;
+	__le16 len;
+	u8 pn[6];
+	u8 tsc_type;
+	u8 rsv;
+} __packed;
+
 struct sec_key {
 	u8 cipher_id;
 	u8 cipher_len;
@@ -768,6 +776,7 @@ struct wtbl_raw {
 					 sizeof(struct sta_rec_sec) +	\
 					 sizeof(struct sta_rec_ra_fixed) + \
 					 sizeof(struct sta_rec_he_6g_capa) + \
+					 sizeof(struct sta_rec_pn_info) + \
 					 sizeof(struct tlv) +		\
 					 MT76_CONNAC_WTBL_UPDATE_MAX_SIZE)
 
@@ -798,6 +807,7 @@ enum {
 	STA_REC_HE_V2 = 0x19,
 	STA_REC_MLD = 0x20,
 	STA_REC_EHT = 0x22,
+	STA_REC_PN_INFO = 0x26,
 	STA_REC_HDRT = 0x28,
 	STA_REC_HDR_TRANS = 0x2B,
 	STA_REC_MAX_NUM
@@ -1091,6 +1101,13 @@ enum mcu_cipher_type {
 	MCU_CIPHER_GCMP_256,
 	MCU_CIPHER_WAPI,
 	MCU_CIPHER_BIP_CMAC_128,
+	MCU_CIPHER_BIP_CMAC_256,
+	MCU_CIPHER_BCN_PROT_CMAC_128,
+	MCU_CIPHER_BCN_PROT_CMAC_256,
+	MCU_CIPHER_BCN_PROT_GMAC_128,
+	MCU_CIPHER_BCN_PROT_GMAC_256,
+	MCU_CIPHER_BIP_GMAC_128,
+	MCU_CIPHER_BIP_GMAC_256,
 };
 
 enum {
@@ -1310,6 +1327,7 @@ enum {
 	UNI_BSS_INFO_RATE = 11,
 	UNI_BSS_INFO_QBSS = 15,
 	UNI_BSS_INFO_SEC = 16,
+	UNI_BSS_INFO_BCN_PROT = 17,
 	UNI_BSS_INFO_TXCMD = 18,
 	UNI_BSS_INFO_UAPSD = 19,
 	UNI_BSS_INFO_PS = 21,
@@ -1771,6 +1789,12 @@ mt76_connac_mcu_get_cipher(int cipher)
 		return MCU_CIPHER_GCMP;
 	case WLAN_CIPHER_SUITE_GCMP_256:
 		return MCU_CIPHER_GCMP_256;
+	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
+		return MCU_CIPHER_BIP_GMAC_128;
+	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
+		return MCU_CIPHER_BIP_GMAC_256;
+	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
+		return MCU_CIPHER_BIP_CMAC_256;
 	case WLAN_CIPHER_SUITE_SMS4:
 		return MCU_CIPHER_WAPI;
 	default:
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index 09c7a28a3d511..482a8f7d75d7a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -342,6 +342,8 @@ static int mt7996_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	case WLAN_CIPHER_SUITE_GCMP:
 	case WLAN_CIPHER_SUITE_GCMP_256:
 	case WLAN_CIPHER_SUITE_SMS4:
+	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
+	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
 		break;
 	case WLAN_CIPHER_SUITE_WEP40:
 	case WLAN_CIPHER_SUITE_WEP104:
@@ -365,9 +367,13 @@ static int mt7996_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	}
 
 	mt76_wcid_key_setup(&dev->mt76, wcid, key);
-	err = mt7996_mcu_add_key(&dev->mt76, vif, &msta->bip,
-				 key, MCU_WMWA_UNI_CMD(STA_REC_UPDATE),
-				 &msta->wcid, cmd);
+
+	if (key->keyidx == 6 || key->keyidx == 7)
+		err = mt7996_mcu_bcn_prot_enable(dev, vif, key);
+	else
+		err = mt7996_mcu_add_key(&dev->mt76, vif, key,
+					 MCU_WMWA_UNI_CMD(STA_REC_UPDATE),
+					 &msta->wcid, cmd);
 out:
 	mutex_unlock(&dev->mt76.mutex);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index bf917beb94396..707db74f234ed 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -2058,7 +2058,6 @@ int mt7996_mcu_add_sta(struct mt7996_dev *dev, struct ieee80211_vif *vif,
 
 static int
 mt7996_mcu_sta_key_tlv(struct mt76_wcid *wcid,
-		       struct mt76_connac_sta_key_conf *sta_key_conf,
 		       struct sk_buff *skb,
 		       struct ieee80211_key_conf *key,
 		       enum set_key_cmd cmd)
@@ -2079,43 +2078,22 @@ mt7996_mcu_sta_key_tlv(struct mt76_wcid *wcid,
 			return -EOPNOTSUPP;
 
 		sec_key = &sec->key[0];
+		sec_key->wlan_idx = cpu_to_le16(wcid->idx);
+		sec_key->mgmt_prot = 0;
+		sec_key->cipher_id = cipher;
 		sec_key->cipher_len = sizeof(*sec_key);
-
-		if (cipher == MCU_CIPHER_BIP_CMAC_128) {
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = MCU_CIPHER_AES_CCMP;
-			sec_key->key_id = sta_key_conf->keyidx;
-			sec_key->key_len = 16;
-			memcpy(sec_key->key, sta_key_conf->key, 16);
-
-			sec_key = &sec->key[1];
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = MCU_CIPHER_BIP_CMAC_128;
-			sec_key->cipher_len = sizeof(*sec_key);
-			sec_key->key_len = 16;
-			memcpy(sec_key->key, key->key, 16);
-			sec->n_cipher = 2;
-		} else {
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = cipher;
-			sec_key->key_id = key->keyidx;
-			sec_key->key_len = key->keylen;
-			memcpy(sec_key->key, key->key, key->keylen);
-
-			if (cipher == MCU_CIPHER_TKIP) {
-				/* Rx/Tx MIC keys are swapped */
-				memcpy(sec_key->key + 16, key->key + 24, 8);
-				memcpy(sec_key->key + 24, key->key + 16, 8);
-			}
-
-			/* store key_conf for BIP batch update */
-			if (cipher == MCU_CIPHER_AES_CCMP) {
-				memcpy(sta_key_conf->key, key->key, key->keylen);
-				sta_key_conf->keyidx = key->keyidx;
-			}
-
-			sec->n_cipher = 1;
+		sec_key->key_id = key->keyidx;
+		sec_key->key_len = key->keylen;
+		sec_key->need_resp = 0;
+		memcpy(sec_key->key, key->key, key->keylen);
+
+		if (cipher == MCU_CIPHER_TKIP) {
+			/* Rx/Tx MIC keys are swapped */
+			memcpy(sec_key->key + 16, key->key + 24, 8);
+			memcpy(sec_key->key + 24, key->key + 16, 8);
 		}
+
+		sec->n_cipher = 1;
 	} else {
 		sec->n_cipher = 0;
 	}
@@ -2124,7 +2102,6 @@ mt7996_mcu_sta_key_tlv(struct mt76_wcid *wcid,
 }
 
 int mt7996_mcu_add_key(struct mt76_dev *dev, struct ieee80211_vif *vif,
-		       struct mt76_connac_sta_key_conf *sta_key_conf,
 		       struct ieee80211_key_conf *key, int mcu_cmd,
 		       struct mt76_wcid *wcid, enum set_key_cmd cmd)
 {
@@ -2137,13 +2114,99 @@ int mt7996_mcu_add_key(struct mt76_dev *dev, struct ieee80211_vif *vif,
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);
 
-	ret = mt7996_mcu_sta_key_tlv(wcid, sta_key_conf, skb, key, cmd);
+	ret = mt7996_mcu_sta_key_tlv(wcid, skb, key, cmd);
 	if (ret)
 		return ret;
 
 	return mt76_mcu_skb_send_msg(dev, skb, mcu_cmd, true);
 }
 
+static int mt7996_mcu_get_pn(struct mt7996_dev *dev, struct ieee80211_vif *vif,
+			     u8 *pn)
+{
+#define TSC_TYPE_BIGTK_PN 2
+	struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
+	struct sta_rec_pn_info *pn_info;
+	struct sk_buff *skb, *rskb;
+	struct tlv *tlv;
+	int ret;
+
+	skb = mt76_connac_mcu_alloc_sta_req(&dev->mt76, &mvif->mt76, &mvif->sta.wcid);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_PN_INFO, sizeof(*pn_info));
+	pn_info = (struct sta_rec_pn_info *)tlv;
+
+	pn_info->tsc_type = TSC_TYPE_BIGTK_PN;
+	ret = mt76_mcu_skb_send_and_get_msg(&dev->mt76, skb,
+					    MCU_WM_UNI_CMD_QUERY(STA_REC_UPDATE),
+					    true, &rskb);
+	if (ret)
+		return ret;
+
+	skb_pull(rskb, 4);
+
+	pn_info = (struct sta_rec_pn_info *)rskb->data;
+	if (le16_to_cpu(pn_info->tag) == STA_REC_PN_INFO)
+		memcpy(pn, pn_info->pn, 6);
+
+	dev_kfree_skb(rskb);
+	return 0;
+}
+
+int mt7996_mcu_bcn_prot_enable(struct mt7996_dev *dev, struct ieee80211_vif *vif,
+			       struct ieee80211_key_conf *key)
+{
+	struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
+	struct mt7996_mcu_bcn_prot_tlv *bcn_prot;
+	struct sk_buff *skb;
+	struct tlv *tlv;
+	u8 pn[6] = {};
+	int len = sizeof(struct bss_req_hdr) +
+		  sizeof(struct mt7996_mcu_bcn_prot_tlv);
+	int ret;
+
+	skb = __mt7996_mcu_alloc_bss_req(&dev->mt76, &mvif->mt76, len);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	tlv = mt76_connac_mcu_add_tlv(skb, UNI_BSS_INFO_BCN_PROT, sizeof(*bcn_prot));
+
+	bcn_prot = (struct mt7996_mcu_bcn_prot_tlv *)tlv;
+
+	ret = mt7996_mcu_get_pn(dev, vif, pn);
+	if (ret) {
+		dev_kfree_skb(skb);
+		return ret;
+	}
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		bcn_prot->cipher_id = MCU_CIPHER_BCN_PROT_CMAC_128;
+		break;
+	case WLAN_CIPHER_SUITE_BIP_GMAC_128:
+		bcn_prot->cipher_id = MCU_CIPHER_BCN_PROT_GMAC_128;
+		break;
+	case WLAN_CIPHER_SUITE_BIP_GMAC_256:
+		bcn_prot->cipher_id = MCU_CIPHER_BCN_PROT_GMAC_256;
+		break;
+	case WLAN_CIPHER_SUITE_BIP_CMAC_256:
+	default:
+		dev_err(dev->mt76.dev, "Not supported Bigtk Cipher\n");
+		dev_kfree_skb(skb);
+		return -EOPNOTSUPP;
+	}
+
+	pn[0]++;
+	memcpy(bcn_prot->pn, pn, 6);
+	bcn_prot->enable = BP_SW_MODE;
+	memcpy(bcn_prot->key, key->key, WLAN_MAX_KEY_LEN);
+	bcn_prot->key_id = key->keyidx;
+
+	return mt76_mcu_skb_send_msg(&dev->mt76, skb,
+				     MCU_WMWA_UNI_CMD(BSS_INFO_UPDATE), true);
+}
 int mt7996_mcu_add_dev_info(struct mt7996_phy *phy,
 			    struct ieee80211_vif *vif, bool enable)
 {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
index 9300cd8eeb76b..32ce57c8c4e6b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
@@ -250,6 +250,23 @@ struct bss_rate_tlv {
 	u8 __rsv2[9];
 } __packed;
 
+enum {
+	BP_DISABLE,
+	BP_SW_MODE,
+	BP_HW_MODE,
+};
+
+struct mt7996_mcu_bcn_prot_tlv {
+	__le16 tag;
+	__le16 len;
+	u8 pn[6];
+	u8 enable;
+	u8 cipher_id;
+	u8 key[WLAN_MAX_KEY_LEN];
+	u8 key_id;
+	u8 __rsv[3];
+} __packed;
+
 struct bss_ra_tlv {
 	__le16 tag;
 	__le16 len;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index e53cf6a3704c4..3434ca50d3181 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -485,9 +485,10 @@ int mt7996_init_debugfs(struct mt7996_phy *phy);
 void mt7996_debugfs_rx_fw_monitor(struct mt7996_dev *dev, const void *data, int len);
 bool mt7996_debugfs_rx_log(struct mt7996_dev *dev, const void *data, int len);
 int mt7996_mcu_add_key(struct mt76_dev *dev, struct ieee80211_vif *vif,
-		       struct mt76_connac_sta_key_conf *sta_key_conf,
 		       struct ieee80211_key_conf *key, int mcu_cmd,
 		       struct mt76_wcid *wcid, enum set_key_cmd cmd);
+int mt7996_mcu_bcn_prot_enable(struct mt7996_dev *dev, struct ieee80211_vif *vif,
+			       struct ieee80211_key_conf *key);
 int mt7996_mcu_wtbl_update_hdr_trans(struct mt7996_dev *dev,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_sta *sta);
-- 
2.43.0

[PATCH 6.7 288/713] wifi: mt76: mt7925: fix WoW failed in encrypted mode

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit 47916693ec7cd1b283ffa7554fc48ff4eec2daa1 ]

When in suspend mode, WoW (Wake-on-WLAN) fails to wake the system remotely
due to incorrect encryption mode settings. For the new mt7925 chipset, the
old STA_REC_KEY_V2 command will send incorrect parameters to the firmware.
Therefore, STA_REC_KEY_V3 has been introduced as a replacement for it.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  1 +
 .../net/wireless/mediatek/mt76/mt7925/main.c  |  3 +-
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   | 86 ++++++++++---------
 .../net/wireless/mediatek/mt76/mt7925/mcu.h   | 70 +++++++++++----
 4 files changed, 103 insertions(+), 57 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index cc6cdbc664290..bf023f317031d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -808,6 +808,7 @@ enum {
 	STA_REC_MLD = 0x20,
 	STA_REC_EHT = 0x22,
 	STA_REC_PN_INFO = 0x26,
+	STA_REC_KEY_V3 = 0x27,
 	STA_REC_HDRT = 0x28,
 	STA_REC_HDR_TRANS = 0x2B,
 	STA_REC_MAX_NUM
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index b6aa792e5511f..09b53cec750b3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -360,6 +360,7 @@ mt7925_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	mvif->sta.wcid.phy_idx = mvif->mt76.band_idx;
 	mvif->sta.wcid.hw_key_idx = -1;
 	mvif->sta.wcid.tx_info |= MT_WCID_TX_INFO_SET;
+	mvif->sta.vif = mvif;
 	mt76_wcid_init(&mvif->sta.wcid);
 
 	mt7925_mac_wtbl_update(dev, idx,
@@ -527,7 +528,7 @@ static int mt7925_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (cmd == SET_KEY && !mvif->mt76.cipher) {
 		struct mt792x_phy *phy = mt792x_hw_phy(hw);
 
-		mvif->mt76.cipher = mt76_connac_mcu_get_cipher(key->cipher);
+		mvif->mt76.cipher = mt7925_mcu_get_cipher(key->cipher);
 		mt7925_mcu_add_bss_info(phy, mvif->mt76.ctx, vif, sta, true);
 	}
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index b21fe015a701b..bafd6ec72ef24 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -921,61 +921,67 @@ mt7925_mcu_sta_key_tlv(struct mt76_wcid *wcid,
 		       struct ieee80211_key_conf *key,
 		       enum set_key_cmd cmd)
 {
+	struct mt792x_sta *msta = container_of(wcid, struct mt792x_sta, wcid);
 	struct sta_rec_sec_uni *sec;
+	struct mt792x_vif *mvif = msta->vif;
+	struct ieee80211_sta *sta;
+	struct ieee80211_vif *vif;
 	struct tlv *tlv;
 
-	tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_KEY_V2, sizeof(*sec));
+	sta = msta == &mvif->sta ?
+		      NULL :
+		      container_of((void *)msta, struct ieee80211_sta, drv_priv);
+	vif = container_of((void *)mvif, struct ieee80211_vif, drv_priv);
+
+	tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_KEY_V3, sizeof(*sec));
 	sec = (struct sta_rec_sec_uni *)tlv;
-	sec->add = cmd;
+	sec->bss_idx = mvif->mt76.idx;
+	sec->is_authenticator = 0;
+	sec->mgmt_prot = 0;
+	sec->wlan_idx = (u8)wcid->idx;
+
+	if (sta) {
+		sec->tx_key = 1;
+		sec->key_type = 1;
+		memcpy(sec->peer_addr, sta->addr, ETH_ALEN);
+	} else {
+		memcpy(sec->peer_addr, vif->bss_conf.bssid, ETH_ALEN);
+	}
 
 	if (cmd == SET_KEY) {
-		struct sec_key_uni *sec_key;
 		u8 cipher;
 
-		cipher = mt76_connac_mcu_get_cipher(key->cipher);
-		if (cipher == MCU_CIPHER_NONE)
+		sec->add = 1;
+		cipher = mt7925_mcu_get_cipher(key->cipher);
+		if (cipher == CONNAC3_CIPHER_NONE)
 			return -EOPNOTSUPP;
 
-		sec_key = &sec->key[0];
-		sec_key->cipher_len = sizeof(*sec_key);
-
-		if (cipher == MCU_CIPHER_BIP_CMAC_128) {
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = MCU_CIPHER_AES_CCMP;
-			sec_key->key_id = sta_key_conf->keyidx;
-			sec_key->key_len = 16;
-			memcpy(sec_key->key, sta_key_conf->key, 16);
-
-			sec_key = &sec->key[1];
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = MCU_CIPHER_BIP_CMAC_128;
-			sec_key->cipher_len = sizeof(*sec_key);
-			sec_key->key_len = 16;
-			memcpy(sec_key->key, key->key, 16);
-			sec->n_cipher = 2;
+		if (cipher == CONNAC3_CIPHER_BIP_CMAC_128) {
+			sec->cipher_id = CONNAC3_CIPHER_BIP_CMAC_128;
+			sec->key_id = sta_key_conf->keyidx;
+			sec->key_len = 32;
+			memcpy(sec->key, sta_key_conf->key, 16);
+			memcpy(sec->key + 16, key->key, 16);
 		} else {
-			sec_key->wlan_idx = cpu_to_le16(wcid->idx);
-			sec_key->cipher_id = cipher;
-			sec_key->key_id = key->keyidx;
-			sec_key->key_len = key->keylen;
-			memcpy(sec_key->key, key->key, key->keylen);
+			sec->cipher_id = cipher;
+			sec->key_id = key->keyidx;
+			sec->key_len = key->keylen;
+			memcpy(sec->key, key->key, key->keylen);
 
-			if (cipher == MCU_CIPHER_TKIP) {
+			if (cipher == CONNAC3_CIPHER_TKIP) {
 				/* Rx/Tx MIC keys are swapped */
-				memcpy(sec_key->key + 16, key->key + 24, 8);
-				memcpy(sec_key->key + 24, key->key + 16, 8);
+				memcpy(sec->key + 16, key->key + 24, 8);
+				memcpy(sec->key + 24, key->key + 16, 8);
 			}
 
 			/* store key_conf for BIP batch update */
-			if (cipher == MCU_CIPHER_AES_CCMP) {
+			if (cipher == CONNAC3_CIPHER_AES_CCMP) {
 				memcpy(sta_key_conf->key, key->key, key->keylen);
 				sta_key_conf->keyidx = key->keyidx;
 			}
-
-			sec->n_cipher = 1;
 		}
 	} else {
-		sec->n_cipher = 0;
+		sec->add = 0;
 	}
 
 	return 0;
@@ -2122,21 +2128,21 @@ mt7925_mcu_bss_sec_tlv(struct sk_buff *skb, struct ieee80211_vif *vif)
 	sec = (struct bss_sec_tlv *)tlv;
 
 	switch (mvif->cipher) {
-	case MCU_CIPHER_GCMP_256:
-	case MCU_CIPHER_GCMP:
+	case CONNAC3_CIPHER_GCMP_256:
+	case CONNAC3_CIPHER_GCMP:
 		sec->mode = MODE_WPA3_SAE;
 		sec->status = 8;
 		break;
-	case MCU_CIPHER_AES_CCMP:
+	case CONNAC3_CIPHER_AES_CCMP:
 		sec->mode = MODE_WPA2_PSK;
 		sec->status = 6;
 		break;
-	case MCU_CIPHER_TKIP:
+	case CONNAC3_CIPHER_TKIP:
 		sec->mode = MODE_WPA2_PSK;
 		sec->status = 4;
 		break;
-	case MCU_CIPHER_WEP104:
-	case MCU_CIPHER_WEP40:
+	case CONNAC3_CIPHER_WEP104:
+	case CONNAC3_CIPHER_WEP40:
 		sec->mode = MODE_SHARED;
 		sec->status = 0;
 		break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
index 0218fd2a0eb01..9fce054e50657 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
@@ -159,6 +159,20 @@ enum {
 	UNI_EVENT_SCAN_DONE_NLO = 3,
 };
 
+enum connac3_mcu_cipher_type {
+	CONNAC3_CIPHER_NONE = 0,
+	CONNAC3_CIPHER_WEP40 = 1,
+	CONNAC3_CIPHER_TKIP = 2,
+	CONNAC3_CIPHER_AES_CCMP = 4,
+	CONNAC3_CIPHER_WEP104 = 5,
+	CONNAC3_CIPHER_BIP_CMAC_128 = 6,
+	CONNAC3_CIPHER_WEP128 = 7,
+	CONNAC3_CIPHER_WAPI = 8,
+	CONNAC3_CIPHER_CCMP_256 = 10,
+	CONNAC3_CIPHER_GCMP = 11,
+	CONNAC3_CIPHER_GCMP_256 = 12,
+};
+
 struct mt7925_mcu_scan_chinfo_event {
 	u8 nr_chan;
 	u8 alpha2[3];
@@ -383,25 +397,22 @@ struct sta_rec_eht {
 	u8 _rsv2[3];
 } __packed;
 
-struct sec_key_uni {
-	__le16 wlan_idx;
-	u8 mgmt_prot;
-	u8 cipher_id;
-	u8 cipher_len;
-	u8 key_id;
-	u8 key_len;
-	u8 need_resp;
-	u8 key[32];
-} __packed;
-
 struct sta_rec_sec_uni {
 	__le16 tag;
 	__le16 len;
 	u8 add;
-	u8 n_cipher;
-	u8 rsv[2];
-
-	struct sec_key_uni key[2];
+	u8 tx_key;
+	u8 key_type;
+	u8 is_authenticator;
+	u8 peer_addr[6];
+	u8 bss_idx;
+	u8 cipher_id;
+	u8 key_id;
+	u8 key_len;
+	u8 wlan_idx;
+	u8 mgmt_prot;
+	u8 key[32];
+	u8 key_rsc[16];
 } __packed;
 
 struct sta_rec_hdr_trans {
@@ -441,7 +452,7 @@ struct sta_rec_mld {
 					 sizeof(struct sta_rec_bfee) +		\
 					 sizeof(struct sta_rec_phy) +		\
 					 sizeof(struct sta_rec_ra) +		\
-					 sizeof(struct sta_rec_sec) +		\
+					 sizeof(struct sta_rec_sec_uni) +   \
 					 sizeof(struct sta_rec_ra_fixed) +	\
 					 sizeof(struct sta_rec_he_6g_capa) +	\
 					 sizeof(struct sta_rec_eht) +		\
@@ -510,6 +521,33 @@ struct mt7925_wow_pattern_tlv {
 	u8 rsv[4];
 } __packed;
 
+static inline enum connac3_mcu_cipher_type
+mt7925_mcu_get_cipher(int cipher)
+{
+	switch (cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		return CONNAC3_CIPHER_WEP40;
+	case WLAN_CIPHER_SUITE_WEP104:
+		return CONNAC3_CIPHER_WEP104;
+	case WLAN_CIPHER_SUITE_TKIP:
+		return CONNAC3_CIPHER_TKIP;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		return CONNAC3_CIPHER_BIP_CMAC_128;
+	case WLAN_CIPHER_SUITE_CCMP:
+		return CONNAC3_CIPHER_AES_CCMP;
+	case WLAN_CIPHER_SUITE_CCMP_256:
+		return CONNAC3_CIPHER_CCMP_256;
+	case WLAN_CIPHER_SUITE_GCMP:
+		return CONNAC3_CIPHER_GCMP;
+	case WLAN_CIPHER_SUITE_GCMP_256:
+		return CONNAC3_CIPHER_GCMP_256;
+	case WLAN_CIPHER_SUITE_SMS4:
+		return CONNAC3_CIPHER_WAPI;
+	default:
+		return CONNAC3_CIPHER_NONE;
+	}
+}
+
 int mt7925_mcu_set_dbdc(struct mt76_phy *phy);
 int mt7925_mcu_hw_scan(struct mt76_phy *phy, struct ieee80211_vif *vif,
 		       struct ieee80211_scan_request *scan_req);
-- 
2.43.0

[PATCH 6.7 289/713] wifi: mt76: mt7925: fix the wrong header translation config

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit d8cf7e1344727b80b4ec3dc17ca520238d55a88d ]

The header translation config should set to broadcast and unicast
cases correctly, not only unicast case. And also remove the cmds
of wtbl (wlan table) series, because these MCU commands have
already been replaced by other commands in mt7925.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   | 32 +++++--------------
 1 file changed, 8 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index bafd6ec72ef24..28b871e552f0c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -814,6 +814,7 @@ mt7925_mcu_sta_hdr_trans_tlv(struct sk_buff *skb,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_sta *sta)
 {
+	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
 	struct sta_rec_hdr_trans *hdr_trans;
 	struct mt76_wcid *wcid;
 	struct tlv *tlv;
@@ -827,7 +828,11 @@ mt7925_mcu_sta_hdr_trans_tlv(struct sk_buff *skb,
 	else
 		hdr_trans->from_ds = true;
 
-	wcid = (struct mt76_wcid *)sta->drv_priv;
+	if (sta)
+		wcid = (struct mt76_wcid *)sta->drv_priv;
+	else
+		wcid = &mvif->sta.wcid;
+
 	if (!wcid)
 		return;
 
@@ -1577,8 +1582,6 @@ mt7925_mcu_sta_cmd(struct mt76_phy *phy,
 {
 	struct mt76_vif *mvif = (struct mt76_vif *)info->vif->drv_priv;
 	struct mt76_dev *dev = phy->dev;
-	struct wtbl_req_hdr *wtbl_hdr;
-	struct tlv *sta_wtbl;
 	struct sk_buff *skb;
 
 	skb = __mt76_connac_mcu_alloc_sta_req(dev, mvif, info->wcid,
@@ -1602,30 +1605,11 @@ mt7925_mcu_sta_cmd(struct mt76_phy *phy,
 		mt7925_mcu_sta_state_v2_tlv(phy, skb, info->sta,
 					    info->vif, info->rcpi,
 					    info->state);
-		mt7925_mcu_sta_hdr_trans_tlv(skb, info->vif, info->sta);
 		mt7925_mcu_sta_mld_tlv(skb, info->vif, info->sta);
 	}
 
-	sta_wtbl = mt76_connac_mcu_add_tlv(skb, STA_REC_WTBL,
-					   sizeof(struct tlv));
-
-	wtbl_hdr = mt76_connac_mcu_alloc_wtbl_req(dev, info->wcid,
-						  WTBL_RESET_AND_SET,
-						  sta_wtbl, &skb);
-	if (IS_ERR(wtbl_hdr))
-		return PTR_ERR(wtbl_hdr);
-
-	if (info->enable) {
-		mt76_connac_mcu_wtbl_generic_tlv(dev, skb, info->vif,
-						 info->sta, sta_wtbl,
-						 wtbl_hdr);
-		mt76_connac_mcu_wtbl_hdr_trans_tlv(skb, info->vif, info->wcid,
-						   sta_wtbl, wtbl_hdr);
-		if (info->sta)
-			mt76_connac_mcu_wtbl_ht_tlv(dev, skb, info->sta,
-						    sta_wtbl, wtbl_hdr,
-						    true, true);
-	}
+	if (info->enable)
+		mt7925_mcu_sta_hdr_trans_tlv(skb, info->vif, info->sta);
 
 	return mt76_mcu_skb_send_msg(dev, skb, info->cmd, true);
 }
-- 
2.43.0

[PATCH 6.7 290/713] wifi: mt76: mt7925: add flow to avoid chip bt function fail

[Sasha Levin]

From: Quan Zhou <quan.zhou@mediatek.com>

[ Upstream commit 9300ae0cd9e8f2407b20e0e67ee3ea03dc8b06af ]

A sub-process of Wifi L0.5 reset will make chip common partition
enter low power, and have chance lead to Bluetooth host-to-chip
command timeout, modify the software flow according to the chip's
design to solve the problem.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7925/pci.c  | 2 ++
 drivers/net/wireless/mediatek/mt76/mt792x_regs.h | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
index 08ef75e24e1cf..c16d683e4891e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
@@ -386,6 +386,8 @@ static int mt7925_pci_probe(struct pci_dev *pdev,
 
 	dev_info(mdev->dev, "ASIC revision: %04x\n", mdev->rev);
 
+	mt76_rmw_field(dev, MT_HW_EMI_CTL, MT_HW_EMI_CTL_SLPPROT_EN, 1);
+
 	ret = mt792x_wfsys_reset(dev);
 	if (ret)
 		goto err_free_dev;
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
index a99af23e4b564..d7f9b24cd665f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
@@ -389,6 +389,9 @@
 #define MT_HW_CHIPID			0x70010200
 #define MT_HW_REV			0x70010204
 
+#define MT_HW_EMI_CTL			0x18011100
+#define MT_HW_EMI_CTL_SLPPROT_EN	BIT(1)
+
 #define MT_PCIE_MAC_BASE		0x10000
 #define MT_PCIE_MAC(ofs)		(MT_PCIE_MAC_BASE + (ofs))
 #define MT_PCIE_MAC_INT_ENABLE		MT_PCIE_MAC(0x188)
-- 
2.43.0

[PATCH 6.7 291/713] wifi: mt76: mt7925: add support to set ifs time by mcu command

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit 8536ef0aeae1177c4a59b043d4b1c41ddaa9df2a ]

There's a race between driver and fw on some tx/rx control registers
when setting ifs, which will cause accidental hw queue pause problems.
Avoid this by setting ifs time with bss_info mcu command.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7925/main.c  |  2 +-
 .../net/wireless/mediatek/mt76/mt7925/mcu.c   | 33 +++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt7925/mcu.h   | 19 +++++++++++
 3 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index 09b53cec750b3..6f0b18ae313de 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -712,7 +712,7 @@ static void mt7925_bss_info_changed(struct ieee80211_hw *hw,
 
 		if (slottime != phy->slottime) {
 			phy->slottime = slottime;
-			mt792x_mac_set_timeing(phy);
+			mt7925_mcu_set_timing(phy, vif);
 		}
 	}
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 28b871e552f0c..8e72012472874 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -2244,6 +2244,38 @@ mt7925_mcu_bss_color_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
 		vif->bss_conf.he_bss_color.color : 0;
 }
 
+static void
+mt7925_mcu_bss_ifs_tlv(struct sk_buff *skb, struct ieee80211_vif *vif)
+{
+	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
+	struct mt792x_phy *phy = mvif->phy;
+	struct bss_ifs_time_tlv *ifs_time;
+	struct tlv *tlv;
+
+	tlv = mt76_connac_mcu_add_tlv(skb, UNI_BSS_INFO_IFS_TIME, sizeof(*ifs_time));
+	ifs_time = (struct bss_ifs_time_tlv *)tlv;
+	ifs_time->slot_valid = true;
+	ifs_time->slot_time = cpu_to_le16(phy->slottime);
+}
+
+int mt7925_mcu_set_timing(struct mt792x_phy *phy,
+			  struct ieee80211_vif *vif)
+{
+	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
+	struct mt792x_dev *dev = phy->dev;
+	struct sk_buff *skb;
+
+	skb = __mt7925_mcu_alloc_bss_req(&dev->mt76, &mvif->mt76,
+					 MT7925_BSS_UPDATE_MAX_SIZE);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	mt7925_mcu_bss_ifs_tlv(skb, vif);
+
+	return mt76_mcu_skb_send_msg(&dev->mt76, skb,
+				     MCU_UNI_CMD(BSS_INFO_UPDATE), true);
+}
+
 int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
 			    struct ieee80211_chanctx_conf *ctx,
 			    struct ieee80211_vif *vif,
@@ -2268,6 +2300,7 @@ int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
 	mt7925_mcu_bss_bmc_tlv(skb, phy, ctx, vif, sta);
 	mt7925_mcu_bss_qos_tlv(skb, vif);
 	mt7925_mcu_bss_mld_tlv(skb, vif, sta);
+	mt7925_mcu_bss_ifs_tlv(skb, vif);
 
 	if (vif->bss_conf.he_support) {
 		mt7925_mcu_bss_he_tlv(skb, vif, phy);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
index 9fce054e50657..2cf39276118eb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
@@ -440,6 +440,22 @@ struct sta_rec_mld {
 	} __packed link[2];
 } __packed;
 
+struct bss_ifs_time_tlv {
+	__le16 tag;
+	__le16 len;
+	u8 slot_valid;
+	u8 sifs_valid;
+	u8 rifs_valid;
+	u8 eifs_valid;
+	__le16 slot_time;
+	__le16 sifs_time;
+	__le16 rifs_time;
+	__le16 eifs_time;
+	u8 eifs_cck_valid;
+	u8 rsv;
+	__le16 eifs_cck_time;
+} __packed;
+
 #define MT7925_STA_UPDATE_MAX_SIZE	(sizeof(struct sta_req_hdr) +		\
 					 sizeof(struct sta_rec_basic) +		\
 					 sizeof(struct sta_rec_bf) +		\
@@ -467,6 +483,7 @@ struct sta_rec_mld {
 					 sizeof(struct bss_mld_tlv) +			\
 					 sizeof(struct bss_info_uni_he) +		\
 					 sizeof(struct bss_info_uni_bss_color) +	\
+					 sizeof(struct bss_ifs_time_tlv) +		\
 					 sizeof(struct tlv))
 
 #define MT_CONNAC3_SKU_POWER_LIMIT      449
@@ -564,6 +581,8 @@ int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
 			    struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta,
 			    int enable);
+int mt7925_mcu_set_timing(struct mt792x_phy *phy,
+			  struct ieee80211_vif *vif);
 int mt7925_mcu_set_deep_sleep(struct mt792x_dev *dev, bool enable);
 int mt7925_mcu_set_channel_domain(struct mt76_phy *phy);
 int mt7925_mcu_set_radio_en(struct mt792x_phy *phy, bool enable);
-- 
2.43.0

[PATCH 6.7 292/713] wifi: mt76: mt7925: update PCIe DMA settings

[Sasha Levin]

From: Deren Wu <deren.wu@mediatek.com>

[ Upstream commit 0844947ccf64ea45edf6619ae2ba6dd9098b3308 ]

Fix the wrong WFDMA settings to improve TX performance.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt792x_dma.c  | 13 ++++++++++---
 drivers/net/wireless/mediatek/mt76/mt792x_regs.h |  5 +++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
index 488326ce5ed4d..8fa36b59e738d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
@@ -123,14 +123,13 @@ static void mt792x_dma_prefetch(struct mt792x_dev *dev)
 
 int mt792x_dma_enable(struct mt792x_dev *dev)
 {
-	if (is_mt7925(&dev->mt76))
-		mt76_rmw(dev, MT_UWFDMA0_GLO_CFG_EXT1, BIT(28), BIT(28));
-
 	/* configure perfetch settings */
 	mt792x_dma_prefetch(dev);
 
 	/* reset dma idx */
 	mt76_wr(dev, MT_WFDMA0_RST_DTX_PTR, ~0);
+	if (is_mt7925(&dev->mt76))
+		mt76_wr(dev, MT_WFDMA0_RST_DRX_PTR, ~0);
 
 	/* configure delay interrupt */
 	mt76_wr(dev, MT_WFDMA0_PRI_DLY_INT_CFG0, 0);
@@ -140,12 +139,20 @@ int mt792x_dma_enable(struct mt792x_dev *dev)
 		 MT_WFDMA0_GLO_CFG_FIFO_LITTLE_ENDIAN |
 		 MT_WFDMA0_GLO_CFG_CLK_GAT_DIS |
 		 MT_WFDMA0_GLO_CFG_OMIT_TX_INFO |
+		 FIELD_PREP(MT_WFDMA0_GLO_CFG_DMA_SIZE, 3) |
+		 MT_WFDMA0_GLO_CFG_FIFO_DIS_CHECK |
+		 MT_WFDMA0_GLO_CFG_RX_WB_DDONE |
 		 MT_WFDMA0_GLO_CFG_CSR_DISP_BASE_PTR_CHAIN_EN |
 		 MT_WFDMA0_GLO_CFG_OMIT_RX_INFO_PFET2);
 
 	mt76_set(dev, MT_WFDMA0_GLO_CFG,
 		 MT_WFDMA0_GLO_CFG_TX_DMA_EN | MT_WFDMA0_GLO_CFG_RX_DMA_EN);
 
+	if (is_mt7925(&dev->mt76)) {
+		mt76_rmw(dev, MT_UWFDMA0_GLO_CFG_EXT1, BIT(28), BIT(28));
+		mt76_set(dev, MT_WFDMA0_INT_RX_PRI, 0x0F00);
+		mt76_set(dev, MT_WFDMA0_INT_TX_PRI, 0x7F00);
+	}
 	mt76_set(dev, MT_WFDMA_DUMMY_CR, MT_WFDMA_NEED_REINIT);
 
 	/* enable interrupts for TX/RX rings */
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
index d7f9b24cd665f..458cfd0260b13 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_regs.h
@@ -292,9 +292,12 @@
 #define MT_WFDMA0_GLO_CFG_TX_DMA_BUSY	BIT(1)
 #define MT_WFDMA0_GLO_CFG_RX_DMA_EN	BIT(2)
 #define MT_WFDMA0_GLO_CFG_RX_DMA_BUSY	BIT(3)
+#define MT_WFDMA0_GLO_CFG_DMA_SIZE	GENMASK(5, 4)
 #define MT_WFDMA0_GLO_CFG_TX_WB_DDONE	BIT(6)
 #define MT_WFDMA0_GLO_CFG_FW_DWLD_BYPASS_DMASHDL BIT(9)
+#define MT_WFDMA0_GLO_CFG_FIFO_DIS_CHECK	BIT(11)
 #define MT_WFDMA0_GLO_CFG_FIFO_LITTLE_ENDIAN	BIT(12)
+#define MT_WFDMA0_GLO_CFG_RX_WB_DDONE	BIT(13)
 #define MT_WFDMA0_GLO_CFG_CSR_DISP_BASE_PTR_CHAIN_EN BIT(15)
 #define MT_WFDMA0_GLO_CFG_OMIT_RX_INFO_PFET2	BIT(21)
 #define MT_WFDMA0_GLO_CFG_OMIT_RX_INFO	BIT(27)
@@ -322,6 +325,8 @@
 
 #define MT_WFDMA0_RST_DTX_PTR		MT_WFDMA0(0x20c)
 #define MT_WFDMA0_RST_DRX_PTR		MT_WFDMA0(0x280)
+#define MT_WFDMA0_INT_RX_PRI		MT_WFDMA0(0x298)
+#define MT_WFDMA0_INT_TX_PRI		MT_WFDMA0(0x29c)
 #define MT_WFDMA0_GLO_CFG_EXT0		MT_WFDMA0(0x2b0)
 #define MT_WFDMA0_CSR_TX_DMASHDL_ENABLE	BIT(6)
 #define MT_WFDMA0_PRI_DLY_INT_CFG0	MT_WFDMA0(0x2f0)
-- 
2.43.0

[PATCH 6.7 293/713] wifi: mt76: mt7996: check txs format before getting skb by pid

[Sasha Levin]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

[ Upstream commit 9c9c25f1dcdd98fffda564d2073f26219c84a2c3 ]

The PPDU TXS does not include the error bit so it cannot use to report
status to mac80211. This patch fixes issue that STA wrongly detects if AP
is still alive.

Fixes: 2569ea5326e2 ("wifi: mt76: mt7996: enable PPDU-TxS to host")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7996/mac.c   | 23 +++++++++++--------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index fa3001e59a364..cee2ede268a2d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -1178,25 +1178,28 @@ mt7996_mac_add_txs_skb(struct mt7996_dev *dev, struct mt76_wcid *wcid,
 	struct ieee80211_tx_info *info;
 	struct sk_buff_head list;
 	struct rate_info rate = {};
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	bool cck = false;
 	u32 txrate, txs, mode, stbc;
 
 	txs = le32_to_cpu(txs_data[0]);
 
 	mt76_tx_status_lock(mdev, &list);
-	skb = mt76_tx_status_skb_get(mdev, wcid, pid, &list);
 
-	if (skb) {
-		info = IEEE80211_SKB_CB(skb);
-		if (!(txs & MT_TXS0_ACK_ERROR_MASK))
-			info->flags |= IEEE80211_TX_STAT_ACK;
+	/* only report MPDU TXS */
+	if (le32_get_bits(txs_data[0], MT_TXS0_TXS_FORMAT) == 0) {
+		skb = mt76_tx_status_skb_get(mdev, wcid, pid, &list);
+		if (skb) {
+			info = IEEE80211_SKB_CB(skb);
+			if (!(txs & MT_TXS0_ACK_ERROR_MASK))
+				info->flags |= IEEE80211_TX_STAT_ACK;
 
-		info->status.ampdu_len = 1;
-		info->status.ampdu_ack_len =
-			!!(info->flags & IEEE80211_TX_STAT_ACK);
+			info->status.ampdu_len = 1;
+			info->status.ampdu_ack_len =
+				!!(info->flags & IEEE80211_TX_STAT_ACK);
 
-		info->status.rates[0].idx = -1;
+			info->status.rates[0].idx = -1;
+		}
 	}
 
 	if (mtk_wed_device_active(&dev->mt76.mmio.wed) && wcid->sta) {
-- 
2.43.0

[PATCH 6.7 294/713] wifi: mt76: mt7996: fix TWT issues

[Sasha Levin]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

[ Upstream commit 5c832c228f6a7ba7e900c5296ce0fb3844bafec5 ]

This patch fixes the following TWT issues:
- Change table_mask to u16 to support up to 16 TWT stations
- Reject TWT flows for duplicated establishment
- Fix possible unaligned pointer
- Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag
- The minimum TWT duration supported by mt7996 chipsets is 64. Reply
  with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7996/mac.c   | 53 ++++++++++++++++---
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  3 +-
 2 files changed, 47 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index cee2ede268a2d..7d33b0c8955ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -2461,6 +2461,34 @@ static int mt7996_mac_check_twt_req(struct ieee80211_twt_setup *twt)
 	return 0;
 }
 
+static bool
+mt7996_mac_twt_param_equal(struct mt7996_sta *msta,
+			   struct ieee80211_twt_params *twt_agrt)
+{
+	u16 type = le16_to_cpu(twt_agrt->req_type);
+	u8 exp;
+	int i;
+
+	exp = FIELD_GET(IEEE80211_TWT_REQTYPE_WAKE_INT_EXP, type);
+	for (i = 0; i < MT7996_MAX_STA_TWT_AGRT; i++) {
+		struct mt7996_twt_flow *f;
+
+		if (!(msta->twt.flowid_mask & BIT(i)))
+			continue;
+
+		f = &msta->twt.flow[i];
+		if (f->duration == twt_agrt->min_twt_dur &&
+		    f->mantissa == twt_agrt->mantissa &&
+		    f->exp == exp &&
+		    f->protection == !!(type & IEEE80211_TWT_REQTYPE_PROTECTION) &&
+		    f->flowtype == !!(type & IEEE80211_TWT_REQTYPE_FLOWTYPE) &&
+		    f->trigger == !!(type & IEEE80211_TWT_REQTYPE_TRIGGER))
+			return true;
+	}
+
+	return false;
+}
+
 void mt7996_mac_add_twt_setup(struct ieee80211_hw *hw,
 			      struct ieee80211_sta *sta,
 			      struct ieee80211_twt_setup *twt)
@@ -2472,8 +2500,7 @@ void mt7996_mac_add_twt_setup(struct ieee80211_hw *hw,
 	enum ieee80211_twt_setup_cmd sta_setup_cmd;
 	struct mt7996_dev *dev = mt7996_hw_dev(hw);
 	struct mt7996_twt_flow *flow;
-	int flowid, table_id;
-	u8 exp;
+	u8 flowid, table_id, exp;
 
 	if (mt7996_mac_check_twt_req(twt))
 		goto out;
@@ -2486,9 +2513,19 @@ void mt7996_mac_add_twt_setup(struct ieee80211_hw *hw,
 	if (hweight8(msta->twt.flowid_mask) == ARRAY_SIZE(msta->twt.flow))
 		goto unlock;
 
+	if (twt_agrt->min_twt_dur < MT7996_MIN_TWT_DUR) {
+		setup_cmd = TWT_SETUP_CMD_DICTATE;
+		twt_agrt->min_twt_dur = MT7996_MIN_TWT_DUR;
+		goto unlock;
+	}
+
+	if (mt7996_mac_twt_param_equal(msta, twt_agrt))
+		goto unlock;
+
 	flowid = ffs(~msta->twt.flowid_mask) - 1;
-	le16p_replace_bits(&twt_agrt->req_type, flowid,
-			   IEEE80211_TWT_REQTYPE_FLOWID);
+	twt_agrt->req_type &= ~cpu_to_le16(IEEE80211_TWT_REQTYPE_FLOWID);
+	twt_agrt->req_type |= le16_encode_bits(flowid,
+					       IEEE80211_TWT_REQTYPE_FLOWID);
 
 	table_id = ffs(~dev->twt.table_mask) - 1;
 	exp = FIELD_GET(IEEE80211_TWT_REQTYPE_WAKE_INT_EXP, req_type);
@@ -2535,10 +2572,10 @@ void mt7996_mac_add_twt_setup(struct ieee80211_hw *hw,
 unlock:
 	mutex_unlock(&dev->mt76.mutex);
 out:
-	le16p_replace_bits(&twt_agrt->req_type, setup_cmd,
-			   IEEE80211_TWT_REQTYPE_SETUP_CMD);
-	twt->control = (twt->control & IEEE80211_TWT_CONTROL_WAKE_DUR_UNIT) |
-		       (twt->control & IEEE80211_TWT_CONTROL_RX_DISABLED);
+	twt_agrt->req_type &= ~cpu_to_le16(IEEE80211_TWT_REQTYPE_SETUP_CMD);
+	twt_agrt->req_type |=
+		le16_encode_bits(setup_cmd, IEEE80211_TWT_REQTYPE_SETUP_CMD);
+	twt->control = twt->control & IEEE80211_TWT_CONTROL_RX_DISABLED;
 }
 
 void mt7996_mac_twt_teardown_flow(struct mt7996_dev *dev,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 3434ca50d3181..6733ee9744d9b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -43,6 +43,7 @@
 
 #define MT7996_MAX_TWT_AGRT		16
 #define MT7996_MAX_STA_TWT_AGRT		8
+#define MT7996_MIN_TWT_DUR		64
 #define MT7996_MAX_QUEUE		(__MT_RXQ_MAX +	__MT_MCUQ_MAX + 3)
 
 /* NOTE: used to map mt76_rates. idx may change if firmware expands table */
@@ -236,7 +237,7 @@ struct mt7996_dev {
 	struct rchan *relay_fwlog;
 
 	struct {
-		u8 table_mask;
+		u16 table_mask;
 		u8 n_agrt;
 	} twt;
 
-- 
2.43.0

[PATCH 6.7 295/713] wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps

[Sasha Levin]

From: Benjamin Lin <benjamin-jw.lin@mediatek.com>

[ Upstream commit d52c97592f06552a4289008602b5d5b724084ba7 ]

The EHT MCS map subfield of 20 MHz-Only is not present in the EHT
capability of AP, so STA does not need to parse the subfield.
Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which
can be confirmed by checking supported channel width in HE capability.

Fixes: 92aa2da9fa49 ("wifi: mt76: mt7996: enable EHT support in firmware")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 707db74f234ed..e7a7d943b168c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -1079,6 +1079,9 @@ mt7996_mcu_sta_he_6g_tlv(struct sk_buff *skb, struct ieee80211_sta *sta)
 static void
 mt7996_mcu_sta_eht_tlv(struct sk_buff *skb, struct ieee80211_sta *sta)
 {
+	struct mt7996_sta *msta = (struct mt7996_sta *)sta->drv_priv;
+	struct ieee80211_vif *vif = container_of((void *)msta->vif,
+						 struct ieee80211_vif, drv_priv);
 	struct ieee80211_eht_mcs_nss_supp *mcs_map;
 	struct ieee80211_eht_cap_elem_fixed *elem;
 	struct sta_rec_eht *eht;
@@ -1098,8 +1101,17 @@ mt7996_mcu_sta_eht_tlv(struct sk_buff *skb, struct ieee80211_sta *sta)
 	eht->phy_cap = cpu_to_le64(*(u64 *)elem->phy_cap_info);
 	eht->phy_cap_ext = cpu_to_le64(elem->phy_cap_info[8]);
 
-	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_20)
-		memcpy(eht->mcs_map_bw20, &mcs_map->only_20mhz, sizeof(eht->mcs_map_bw20));
+	if (vif->type != NL80211_IFTYPE_STATION &&
+	    (sta->deflink.he_cap.he_cap_elem.phy_cap_info[0] &
+	     (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
+	      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+	      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+	      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
+		memcpy(eht->mcs_map_bw20, &mcs_map->only_20mhz,
+		       sizeof(eht->mcs_map_bw20));
+		return;
+	}
+
 	memcpy(eht->mcs_map_bw80, &mcs_map->bw._80, sizeof(eht->mcs_map_bw80));
 	memcpy(eht->mcs_map_bw160, &mcs_map->bw._160, sizeof(eht->mcs_map_bw160));
 	memcpy(eht->mcs_map_bw320, &mcs_map->bw._320, sizeof(eht->mcs_map_bw320));
-- 
2.43.0

[PATCH 6.7 296/713] wifi: mt76: mt7996: fix HE beamformer phy cap for station vif

[Sasha Levin]

From: Howard Hsu <howard-yh.hsu@mediatek.com>

[ Upstream commit e1a491e856a8a36c46b39ecd07f3bba5a119d83a ]

Set correct beamformer capabilities for station vif in HE PHY
capability IE.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 55cb1770fa34e..1d75bf23a02d4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -578,11 +578,12 @@ mt7996_set_stream_he_txbf_caps(struct mt7996_phy *phy,
 	/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */
 	elem->phy_cap_info[7] |= min_t(int, sts - 1, 2) << 3;
 
-	if (vif != NL80211_IFTYPE_AP)
+	if (!(vif == NL80211_IFTYPE_AP || vif == NL80211_IFTYPE_STATION))
 		return;
 
 	elem->phy_cap_info[3] |= IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER;
-	elem->phy_cap_info[4] |= IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
+	if (vif == NL80211_IFTYPE_AP)
+		elem->phy_cap_info[4] |= IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
 
 	c = FIELD_PREP(IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK,
 		       sts - 1) |
-- 
2.43.0

[PATCH 6.7 297/713] wifi: mt76: mt7996: fix efuse reading issue

[Sasha Levin]

From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

[ Upstream commit d3ad99be7cc2d174126d908addd6bea2b157aa75 ]

The efuse data starts from the 48th bytes instead of 64th bytes in the
returned event skb.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index e7a7d943b168c..0586f5bd4164f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -3426,7 +3426,7 @@ int mt7996_mcu_get_eeprom(struct mt7996_dev *dev, u32 offset)
 		u32 addr = le32_to_cpu(*(__le32 *)(skb->data + 12));
 		u8 *buf = (u8 *)dev->mt76.eeprom.data + addr;
 
-		skb_pull(skb, 64);
+		skb_pull(skb, 48);
 		memcpy(buf, skb->data, MT7996_EEPROM_BLOCK_SIZE);
 	}
 
-- 
2.43.0

[PATCH 6.7 298/713] wifi: mt76: mt7996: fix HIF_TXD_V2_1 value

[Sasha Levin]

From: Benjamin Lin <benjamin-jw.lin@mediatek.com>

[ Upstream commit de8882775156682ba358afc82cb575c92cf3d092 ]

Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill
TXD values for HW path.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 1d75bf23a02d4..f8b61df15fcb1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -297,7 +297,7 @@ static void mt7996_mac_init_basic_rates(struct mt7996_dev *dev)
 
 void mt7996_mac_init(struct mt7996_dev *dev)
 {
-#define HIF_TXD_V2_1	4
+#define HIF_TXD_V2_1	0x21
 	int i;
 
 	mt76_clear(dev, MT_MDP_DCR2, MT_MDP_DCR2_RX_TRANS_SHORT);
-- 
2.43.0

[PATCH 6.7 299/713] wifi: mt76: mt792x: fix ethtool warning

[Sasha Levin]

From: Gen Xu <genxu6@gmail.com>

[ Upstream commit 7b4f9cd6a5fc221895b1d9be83ee3c13c00d09ab ]

Add a missing EHT related field to fix the following ethtool warning:
[98179.287352] mt7921e 0003:01:00.0: ei: 74  SSTATS_LEN: 73

Fixes: c74df1c067f2 ("wifi: mt76: mt792x: introduce mt792x-lib module")
Signed-off-by: Gen Xu <genxu6@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt792x_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_core.c b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
index 502be22dbe367..fb35eff6dc7b3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_core.c
@@ -354,6 +354,7 @@ static const char mt792x_gstrings_stats[][ETH_GSTRING_LEN] = {
 	"v_tx_bw_40",
 	"v_tx_bw_80",
 	"v_tx_bw_160",
+	"v_tx_bw_320",
 	"v_tx_mcs_0",
 	"v_tx_mcs_1",
 	"v_tx_mcs_2",
-- 
2.43.0

[PATCH 6.7 300/713] wifi: mt76: mt7921e: fix use-after-free in free_irq()

[Sasha Levin]

From: Deren Wu <deren.wu@mediatek.com>

[ Upstream commit c957280ef6ab6bdf559a91ae693a6b34310697e3 ]

From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.

BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e]
Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115
CPU: 28 PID: 11115 Comm: rmmod Tainted: G        W    L    5.17.0 #10
Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I
EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024
Call Trace:
 <TASK>
 dump_stack_lvl+0x6f/0xa0
 print_address_description.constprop.0+0x1f/0x190
 ? mt7921_irq_handler+0xd8/0x100 [mt7921e]
 ? mt7921_irq_handler+0xd8/0x100 [mt7921e]
 kasan_report.cold+0x7f/0x11b
 ? mt7921_irq_handler+0xd8/0x100 [mt7921e]
 mt7921_irq_handler+0xd8/0x100 [mt7921e]
 free_irq+0x627/0xaa0
 devm_free_irq+0x94/0xd0
 ? devm_request_any_context_irq+0x160/0x160
 ? kobject_put+0x18d/0x4a0
 mt7921_pci_remove+0x153/0x190 [mt7921e]
 pci_device_remove+0xa2/0x1d0
 __device_release_driver+0x346/0x6e0
 driver_detach+0x1ef/0x2c0
 bus_remove_driver+0xe7/0x2d0
 ? __check_object_size+0x57/0x310
 pci_unregister_driver+0x26/0x250
 __do_sys_delete_module+0x307/0x510
 ? free_module+0x6a0/0x6a0
 ? fpregs_assert_state_consistent+0x4b/0xb0
 ? rcu_read_lock_sched_held+0x10/0x70
 ? syscall_enter_from_user_mode+0x20/0x70
 ? trace_hardirqs_on+0x1c/0x130
 do_syscall_64+0x5c/0x80
 ? trace_hardirqs_on_prepare+0x72/0x160
 ? do_syscall_64+0x68/0x80
 ? trace_hardirqs_on_prepare+0x72/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CABXGCsOdvVwdLmSsC8TZ1jF0UOg_F_W3wqLECWX620PUkvNk=A@mail.gmail.com/
Fixes: 9270270d6219 ("wifi: mt76: mt7921: fix PCI DMA hang after reboot")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 1 +
 drivers/net/wireless/mediatek/mt76/mt792x_dma.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 42fd456eb6faf..4d04911245409 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -387,6 +387,7 @@ static void mt7921_pci_remove(struct pci_dev *pdev)
 	struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76);
 
 	mt7921e_unregister_device(dev);
+	set_bit(MT76_REMOVED, &mdev->phy.state);
 	devm_free_irq(&pdev->dev, pdev->irq, dev);
 	mt76_free_device(&dev->mt76);
 	pci_free_irq_vectors(pdev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
index 8fa36b59e738d..5cc2d59b774af 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_dma.c
@@ -12,6 +12,8 @@ irqreturn_t mt792x_irq_handler(int irq, void *dev_instance)
 {
 	struct mt792x_dev *dev = dev_instance;
 
+	if (test_bit(MT76_REMOVED, &dev->mt76.phy.state))
+		return IRQ_NONE;
 	mt76_wr(dev, dev->irq_map->host_irq_enable, 0);
 
 	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
-- 
2.43.0

[PATCH 6.7 301/713] wifi: mt76: mt7925e: fix use-after-free in free_irq()

[Sasha Levin]

From: Deren Wu <deren.wu@mediatek.com>

[ Upstream commit a5a5f4413d91f395cb2d89829d376d7393ad48b9 ]

From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.

Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
index c16d683e4891e..bf02a15067ef6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/pci.c
@@ -427,6 +427,7 @@ static void mt7925_pci_remove(struct pci_dev *pdev)
 	struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76);
 
 	mt7925e_unregister_device(dev);
+	set_bit(MT76_REMOVED, &mdev->phy.state);
 	devm_free_irq(&pdev->dev, pdev->irq, dev);
 	mt76_free_device(&dev->mt76);
 	pci_free_irq_vectors(pdev);
-- 
2.43.0

[PATCH 6.7 302/713] wifi: mt76: mt7921: fix incorrect type conversion for CLC command

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit b6351ef9994ccb93b2447d396a0c517964dff2bc ]

clc->len is defined as 32 bits in length, so it must also be
operated on with 32 bits, not 16 bits.

Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 399d7ca6bebcb..18056045d9759 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -1270,7 +1270,7 @@ int __mt7921_mcu_set_clc(struct mt792x_dev *dev, u8 *alpha2,
 		.acpi_conf = mt792x_acpi_get_flags(&dev->phy),
 	};
 	int ret, valid_cnt = 0;
-	u16 buf_len = 0;
+	u32 buf_len = 0;
 	u8 *pos;
 
 	if (!clc)
@@ -1281,7 +1281,7 @@ int __mt7921_mcu_set_clc(struct mt792x_dev *dev, u8 *alpha2,
 	if (mt76_find_power_limits_node(&dev->mt76))
 		req.cap |= CLC_CAP_DTS_EN;
 
-	buf_len = le16_to_cpu(clc->len) - sizeof(*clc);
+	buf_len = le32_to_cpu(clc->len) - sizeof(*clc);
 	pos = clc->data;
 	while (buf_len > 16) {
 		struct mt7921_clc_rule *rule = (struct mt7921_clc_rule *)pos;
-- 
2.43.0

[PATCH 6.7 303/713] wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit 07ce1d46372489d90f9cccebb3277d1af801c4b9 ]

In some case, the MTCL table will exist, but MTDS table will not.
So the SAR will init fail. This patch make MTCL and MTDS can exist
with no dependence.

Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/mediatek/mt76/mt792x_acpi_sar.c  | 26 ++++++++++---------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c b/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
index 303c0f5c9c662..c4e3bfcc519e2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
+++ b/drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c
@@ -66,13 +66,15 @@ mt792x_acpi_read(struct mt792x_dev *dev, u8 *method, u8 **tbl, u32 *len)
 }
 
 /* MTCL : Country List Table for 6G band */
-static void
+static int
 mt792x_asar_acpi_read_mtcl(struct mt792x_dev *dev, u8 **table, u8 *version)
 {
-	if (mt792x_acpi_read(dev, MT792x_ACPI_MTCL, table, NULL) < 0)
-		*version = 1;
-	else
-		*version = 2;
+	int ret;
+
+	*version = ((ret = mt792x_acpi_read(dev, MT792x_ACPI_MTCL, table, NULL)) < 0)
+		   ? 1 : 2;
+
+	return ret;
 }
 
 /* MTDS : Dynamic SAR Power Table */
@@ -166,16 +168,16 @@ int mt792x_init_acpi_sar(struct mt792x_dev *dev)
 	if (!asar)
 		return -ENOMEM;
 
-	mt792x_asar_acpi_read_mtcl(dev, (u8 **)&asar->countrylist, &asar->ver);
+	ret = mt792x_asar_acpi_read_mtcl(dev, (u8 **)&asar->countrylist, &asar->ver);
+	if (ret) {
+		devm_kfree(dev->mt76.dev, asar->countrylist);
+		asar->countrylist = NULL;
+	}
 
-	/* MTDS is mandatory. Return error if table is invalid */
 	ret = mt792x_asar_acpi_read_mtds(dev, (u8 **)&asar->dyn, asar->ver);
 	if (ret) {
 		devm_kfree(dev->mt76.dev, asar->dyn);
-		devm_kfree(dev->mt76.dev, asar->countrylist);
-		devm_kfree(dev->mt76.dev, asar);
-
-		return ret;
+		asar->dyn = NULL;
 	}
 
 	/* MTGS is optional */
@@ -290,7 +292,7 @@ int mt792x_init_acpi_sar_power(struct mt792x_phy *phy, bool set_default)
 	const struct cfg80211_sar_capa *capa = phy->mt76->hw->wiphy->sar_capa;
 	int i;
 
-	if (!phy->acpisar)
+	if (!phy->acpisar || !((struct mt792x_acpi_sar *)phy->acpisar)->dyn)
 		return 0;
 
 	/* When ACPI SAR enabled in HW, we should apply rules for .frp
-- 
2.43.0

[PATCH 6.7 304/713] wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177

[Sasha Levin]

From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

[ Upstream commit e9a46175a79fbc591c48d433020444b8fa2750ee ]

Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.

Fixes: 7801da338856 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index b475555097ff2..633f56210563c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -2100,7 +2100,7 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 		int j, msg_len, num_ch;
 		struct sk_buff *skb;
 
-		num_ch = i == batch_size - 1 ? n_chan % batch_len : batch_len;
+		num_ch = i == batch_size - 1 ? n_chan - i * batch_len : batch_len;
 		msg_len = sizeof(tx_power_tlv) + num_ch * sizeof(sku_tlbv);
 		skb = mt76_mcu_msg_alloc(dev, NULL, msg_len);
 		if (!skb) {
-- 
2.43.0

[PATCH 6.7 305/713] arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes

[Sasha Levin]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

[ Upstream commit 14fe225dd5fcd5928583b0bcc34398a581f51602 ]

The IRQC IP block supports Bus error and ECCRAM interrupts on RZ/G2L and
alike SoC's (listed below).  Update the IRQC nodes with the missing
interrupts, and additionally, include the 'interrupt-names' properties
in the IRQC nodes so that the driver can parse interrupts by name.

  - R9A07G043U              - RZ/G2UL
  - R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
  - R9A07G054               - RZ/V2L

Fixes: 5edc51af5b30 ("arm64: dts: renesas: r9a07g044: Add IRQC node")
Fixes: 48ab6eddd8bb ("arm64: dts: renesas: r9a07g043u: Add IRQC node")
Fixes: 379478ab09e0 ("arm64: dts: renesas: r9a07g054: Add IRQC node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240205144421.51195-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 12 +++++++++--
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi  | 22 ++++++++++++++++++++-
 arch/arm64/boot/dts/renesas/r9a07g054.dtsi  | 22 ++++++++++++++++++++-
 3 files changed, 52 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index 2ab231572d95f..b3f83d0ebcbb5 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -109,7 +109,13 @@ irqc: interrupt-controller@110a0000 {
 			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
-			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>;
 		interrupt-names = "nmi",
 				  "irq0", "irq1", "irq2", "irq3",
 				  "irq4", "irq5", "irq6", "irq7",
@@ -121,7 +127,9 @@ irqc: interrupt-controller@110a0000 {
 				  "tint20", "tint21", "tint22", "tint23",
 				  "tint24", "tint25", "tint26", "tint27",
 				  "tint28", "tint29", "tint30", "tint31",
-				  "bus-err";
+				  "bus-err", "ec7tie1-0", "ec7tie2-0",
+				  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+				  "ec7tiovf-1";
 		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
 			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
 		clock-names = "clk", "pclk";
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 66f68fc2b2411..081d8f49db879 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -905,7 +905,27 @@ irqc: interrupt-controller@110a0000 {
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
 			clock-names = "clk", "pclk";
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 1f1d481dc7830..0d327464d2baf 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -912,7 +912,27 @@ irqc: interrupt-controller@110a0000 {
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
 			clock-names = "clk", "pclk";
-- 
2.43.0

[PATCH 6.7 306/713] arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0c51912331f8ba5ce5fb52f46e340945160672a3 ]

All Ethernet AVB instances on R-Car V3U have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 5a633320f08b8c9b ("arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ce6ce3c4b1495e02e7c1803fca810a7178a84500.1707660323.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 4e67a03564971..504ac8c93faf5 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -658,7 +658,7 @@ channel7 {
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
@@ -706,7 +706,7 @@ avb0: ethernet@e6800000 {
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0

[PATCH 6.7 307/713] arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7edbb5880dc3317a5eaec2166de71ff394598e6b ]

All Ethernet AVB instances on R-Car V4H have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 848c82db56923a8b ("arm64: dts: renesas: r8a779g0: Add RAVB nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/83437778614a7c96f4d8f1be98dffeee29bb4a0b.1707660323.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 0c83940b3d8a1..d7677595204dc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -767,7 +767,7 @@ channel7 {
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -814,7 +814,7 @@ avb0: ethernet@e6800000 {
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0

[PATCH 6.7 308/713] net: mctp: copy skb ext data when fragmenting

[Sasha Levin]

From: Jeremy Kerr <jk@codeconstruct.com.au>

[ Upstream commit 1394c1dec1c619a46867ed32791a29695372bff8 ]

If we're fragmenting on local output, the original packet may contain
ext data for the MCTP flows. We'll want this in the resulting fragment
skbs too.

So, do a skb_ext_copy() in the fragmentation path, and implement the
MCTP-specific parts of an ext copy operation.

Fixes: 67737c457281 ("mctp: Pass flow data & flow release events to drivers")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 8 ++++++++
 net/mctp/route.c  | 3 +++
 2 files changed, 11 insertions(+)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 94cc40a6f7975..78cb3304fb353 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -6676,6 +6676,14 @@ static struct skb_ext *skb_ext_maybe_cow(struct skb_ext *old,
 		for (i = 0; i < sp->len; i++)
 			xfrm_state_hold(sp->xvec[i]);
 	}
+#endif
+#ifdef CONFIG_MCTP_FLOWS
+	if (old_active & (1 << SKB_EXT_MCTP)) {
+		struct mctp_flow *flow = skb_ext_get_ptr(old, SKB_EXT_MCTP);
+
+		if (flow->key)
+			refcount_inc(&flow->key->refs);
+	}
 #endif
 	__skb_ext_put(old);
 	return new;
diff --git a/net/mctp/route.c b/net/mctp/route.c
index ceee44ea09d97..01c530dbc1a65 100644
--- a/net/mctp/route.c
+++ b/net/mctp/route.c
@@ -843,6 +843,9 @@ static int mctp_do_fragment_route(struct mctp_route *rt, struct sk_buff *skb,
 		/* copy message payload */
 		skb_copy_bits(skb, pos, skb_transport_header(skb2), size);
 
+		/* we need to copy the extensions, for MCTP flow data */
+		skb_ext_copy(skb2, skb);
+
 		/* do route */
 		rc = rt->output(rt, skb2);
 		if (rc)
-- 
2.43.0

[PATCH 6.7 309/713] pstore: inode: Convert mutex usage to guard(mutex)

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit e2eeddefb046dbc771a6fa426f7f98fb25adfe68 ]

Replace open-coded mutex handling with cleanup.h guard(mutex) and
scoped_guard(mutex, ...).

Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <linux-hardening@vger.kernel.org>
Link: https://lore.kernel.org/r/20231205182622.1329923-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: a43e0fc5e913 ("pstore: inode: Only d_invalidate() is needed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/inode.c | 76 +++++++++++++++++++----------------------------
 1 file changed, 31 insertions(+), 45 deletions(-)

diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index d41c20d1b5e82..4b4686c593996 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -182,25 +182,21 @@ static int pstore_unlink(struct inode *dir, struct dentry *dentry)
 {
 	struct pstore_private *p = d_inode(dentry)->i_private;
 	struct pstore_record *record = p->record;
-	int rc = 0;
 
 	if (!record->psi->erase)
 		return -EPERM;
 
 	/* Make sure we can't race while removing this file. */
-	mutex_lock(&records_list_lock);
-	if (!list_empty(&p->list))
-		list_del_init(&p->list);
-	else
-		rc = -ENOENT;
-	p->dentry = NULL;
-	mutex_unlock(&records_list_lock);
-	if (rc)
-		return rc;
-
-	mutex_lock(&record->psi->read_mutex);
-	record->psi->erase(record);
-	mutex_unlock(&record->psi->read_mutex);
+	scoped_guard(mutex, &records_list_lock) {
+		if (!list_empty(&p->list))
+			list_del_init(&p->list);
+		else
+			return -ENOENT;
+		p->dentry = NULL;
+	}
+
+	scoped_guard(mutex, &record->psi->read_mutex)
+		record->psi->erase(record);
 
 	return simple_unlink(dir, dentry);
 }
@@ -292,19 +288,16 @@ static struct dentry *psinfo_lock_root(void)
 {
 	struct dentry *root;
 
-	mutex_lock(&pstore_sb_lock);
+	guard(mutex)(&pstore_sb_lock);
 	/*
 	 * Having no backend is fine -- no records appear.
 	 * Not being mounted is fine -- nothing to do.
 	 */
-	if (!psinfo || !pstore_sb) {
-		mutex_unlock(&pstore_sb_lock);
+	if (!psinfo || !pstore_sb)
 		return NULL;
-	}
 
 	root = pstore_sb->s_root;
 	inode_lock(d_inode(root));
-	mutex_unlock(&pstore_sb_lock);
 
 	return root;
 }
@@ -319,19 +312,19 @@ int pstore_put_backend_records(struct pstore_info *psi)
 	if (!root)
 		return 0;
 
-	mutex_lock(&records_list_lock);
-	list_for_each_entry_safe(pos, tmp, &records_list, list) {
-		if (pos->record->psi == psi) {
-			list_del_init(&pos->list);
-			rc = simple_unlink(d_inode(root), pos->dentry);
-			if (WARN_ON(rc))
-				break;
-			d_drop(pos->dentry);
-			dput(pos->dentry);
-			pos->dentry = NULL;
+	scoped_guard(mutex, &records_list_lock) {
+		list_for_each_entry_safe(pos, tmp, &records_list, list) {
+			if (pos->record->psi == psi) {
+				list_del_init(&pos->list);
+				rc = simple_unlink(d_inode(root), pos->dentry);
+				if (WARN_ON(rc))
+					break;
+				d_drop(pos->dentry);
+				dput(pos->dentry);
+				pos->dentry = NULL;
+			}
 		}
 	}
-	mutex_unlock(&records_list_lock);
 
 	inode_unlock(d_inode(root));
 
@@ -355,20 +348,20 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 	if (WARN_ON(!inode_is_locked(d_inode(root))))
 		return -EINVAL;
 
-	rc = -EEXIST;
+	guard(mutex)(&records_list_lock);
+
 	/* Skip records that are already present in the filesystem. */
-	mutex_lock(&records_list_lock);
 	list_for_each_entry(pos, &records_list, list) {
 		if (pos->record->type == record->type &&
 		    pos->record->id == record->id &&
 		    pos->record->psi == record->psi)
-			goto fail;
+			return -EEXIST;
 	}
 
 	rc = -ENOMEM;
 	inode = pstore_get_inode(root->d_sb);
 	if (!inode)
-		goto fail;
+		return -ENOMEM;
 	inode->i_mode = S_IFREG | 0444;
 	inode->i_fop = &pstore_file_operations;
 	scnprintf(name, sizeof(name), "%s-%s-%llu%s",
@@ -396,7 +389,6 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 	d_add(dentry, inode);
 
 	list_add(&private->list, &records_list);
-	mutex_unlock(&records_list_lock);
 
 	return 0;
 
@@ -404,8 +396,6 @@ int pstore_mkfile(struct dentry *root, struct pstore_record *record)
 	free_pstore_private(private);
 fail_inode:
 	iput(inode);
-fail:
-	mutex_unlock(&records_list_lock);
 	return rc;
 }
 
@@ -451,9 +441,8 @@ static int pstore_fill_super(struct super_block *sb, void *data, int silent)
 	if (!sb->s_root)
 		return -ENOMEM;
 
-	mutex_lock(&pstore_sb_lock);
-	pstore_sb = sb;
-	mutex_unlock(&pstore_sb_lock);
+	scoped_guard(mutex, &pstore_sb_lock)
+		pstore_sb = sb;
 
 	pstore_get_records(0);
 
@@ -468,17 +457,14 @@ static struct dentry *pstore_mount(struct file_system_type *fs_type,
 
 static void pstore_kill_sb(struct super_block *sb)
 {
-	mutex_lock(&pstore_sb_lock);
+	guard(mutex)(&pstore_sb_lock);
 	WARN_ON(pstore_sb && pstore_sb != sb);
 
 	kill_litter_super(sb);
 	pstore_sb = NULL;
 
-	mutex_lock(&records_list_lock);
+	guard(mutex)(&records_list_lock);
 	INIT_LIST_HEAD(&records_list);
-	mutex_unlock(&records_list_lock);
-
-	mutex_unlock(&pstore_sb_lock);
 }
 
 static struct file_system_type pstore_fs_type = {
-- 
2.43.0

[PATCH 6.7 310/713] pstore: inode: Only d_invalidate() is needed

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit a43e0fc5e9134a46515de2f2f8d4100b74e50de3 ]

Unloading a modular pstore backend with records in pstorefs would
trigger the dput() double-drop warning:

  WARNING: CPU: 0 PID: 2569 at fs/dcache.c:762 dput.part.0+0x3f3/0x410

Using the combo of d_drop()/dput() (as mentioned in
Documentation/filesystems/vfs.rst) isn't the right approach here, and
leads to the reference counting problem seen above. Use d_invalidate()
and update the code to not bother checking for error codes that can
never happen.

Suggested-by: Alexander Viro <viro@zeniv.linux.org.uk>
Fixes: 609e28bb139e ("pstore: Remove filesystem records when backend is unregistered")
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 fs/pstore/inode.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index 4b4686c593996..4ca72b08d919a 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -306,7 +306,6 @@ int pstore_put_backend_records(struct pstore_info *psi)
 {
 	struct pstore_private *pos, *tmp;
 	struct dentry *root;
-	int rc = 0;
 
 	root = psinfo_lock_root();
 	if (!root)
@@ -316,11 +315,8 @@ int pstore_put_backend_records(struct pstore_info *psi)
 		list_for_each_entry_safe(pos, tmp, &records_list, list) {
 			if (pos->record->psi == psi) {
 				list_del_init(&pos->list);
-				rc = simple_unlink(d_inode(root), pos->dentry);
-				if (WARN_ON(rc))
-					break;
-				d_drop(pos->dentry);
-				dput(pos->dentry);
+				d_invalidate(pos->dentry);
+				simple_unlink(d_inode(root), pos->dentry);
 				pos->dentry = NULL;
 			}
 		}
@@ -328,7 +324,7 @@ int pstore_put_backend_records(struct pstore_info *psi)
 
 	inode_unlock(d_inode(root));
 
-	return rc;
+	return 0;
 }
 
 /*
-- 
2.43.0

[PATCH 6.7 311/713] arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 7b59348c11f3355e284d77bbe3d33632ddadcfc2 ]

The SPDIF hardware found on the H6 supports both transmit and receive
functions. However it is missing the RX DMA channel.

Add the SPDIF hardware block's RX DMA channel. Also remove the
by-default pinmux, since the end device can choose to implement
either or both functionalities.

Fixes: f95b598df419 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-6-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 ++
 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi      | 2 ++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi            | 7 +++----
 3 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f6fd5..381d58cea092d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@ sw {
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358112d..855b7d43bc503 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@ &r_ir {
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0a01d..d11e5041bae9a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@ spi1_cs_pin: spi1-cs-pin {
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@ spdif: spdif@5093000 {
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.43.0

[PATCH 6.7 312/713] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 023bd910d3ab735459f84b22bb99fb9e00bd9d76 ]

This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb11..d2b3e09eb7df8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -127,7 +127,7 @@ phy_port3: phy@2 {
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
-- 
2.43.0

[PATCH 6.7 313/713] ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 79978bff2e4b8e05ebdf5fc3ee6b794002393484 ]

We identified that the PHYs actually do not work since commit 7da7b84fee58
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.

The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.

Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.

With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a8f
("net: dsa: qca8k: fix illegal usage of GPIO")

The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.

To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.

Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 23 ++++++++++++-------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index d2b3e09eb7df8..c32ea040fecdd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,14 +117,6 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <0x10>;
@@ -149,15 +141,30 @@ fixed-link {
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
-- 
2.43.0

[PATCH 6.7 314/713] arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 13ab6f174a6b577bd7d09124b47ec8ace2682e42 ]

The SPI NOR bus routing on this board cannot go above 50 MHz,
set the clock frequency to maximum of 40 MHz to be within a
safe margin. Remove the comment as well.

Fixes: 562d222f23f0 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 5828c9d7821de..b5ce7b14b5434 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -121,7 +121,7 @@ &ecspi1 {
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
-- 
2.43.0

[PATCH 6.7 315/713] arm64: dts: imx8mp-evk: Fix hdmi@3d node

[Sasha Levin]

From: Liu Ying <victor.liu@nxp.com>

[ Upstream commit 0ff08803eca417dfa9372194bebf3d1b1f501f98 ]

The hdmi@3d node's compatible string is "adi,adv7535" instead of
"adi,adv7533" or "adi,adv751*".

Fix the hdmi@3d node by means of:
* Use default register addresses for "cec", "edid" and "packet", because
  there is no need to use a non-default address map.
* Add missing interrupt related properties.
* Drop "adi,input-*" properties which are only valid for adv751*.
* Add VEXT_3V3 fixed regulator.
* Add "*-supply" properties, since most are required.
* Fix label names - s/adv7533/adv7535/.

Fixes: 65344b9bed3a ("arm64: dts: imx8mp-evk: Add HDMI support")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 33 +++++++++++++-------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b43ab8..92f8cc05fe9da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@ hdmi-connector {
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -342,7 +349,7 @@ BUCK4 {
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -393,14 +400,16 @@ &i2c2 {
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -409,7 +418,7 @@ ports {
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -417,7 +426,7 @@ adv7533_in: endpoint {
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -502,7 +511,7 @@ port@1 {
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
-- 
2.43.0

[PATCH 6.7 316/713] regulator: userspace-consumer: add module device table

[Sasha Levin]

From: John Keeping <jkeeping@inmusicbrands.com>

[ Upstream commit 531a0c0cdbff9cecf41073220a826f8b1132f9ab ]

The userspace consumer can be built as a module but it cannot be
automatically probed as there is no device table to match it up with
device tree nodes.

Add the missing macro so that the module can load automatically.

Fixes: 5c51d4afcf3fd ("regulator: userspace-consumer: Handle regulator-output DT nodes")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://msgid.link/r/20240226160554.1453283-1-jkeeping@inmusicbrands.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/userspace-consumer.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
index 97f075ed68c95..cb1de24b98626 100644
--- a/drivers/regulator/userspace-consumer.c
+++ b/drivers/regulator/userspace-consumer.c
@@ -210,6 +210,7 @@ static const struct of_device_id regulator_userspace_consumer_of_match[] = {
 	{ .compatible = "regulator-output", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, regulator_userspace_consumer_of_match);
 
 static struct platform_driver regulator_userspace_consumer_driver = {
 	.probe		= regulator_userspace_consumer_probe,
-- 
2.43.0

[PATCH 6.7 317/713] gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 0d776cfd5e5b559fdf2e38285c2aea4b7048acbd ]

This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:

 (NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup

Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:

 gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup

Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-devres.c |  2 +-
 drivers/gpio/gpiolib.c        | 14 +++++++-------
 drivers/gpio/gpiolib.h        |  8 ++++++++
 3 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
index fe9ce6b19f15c..4987e62dcb3d1 100644
--- a/drivers/gpio/gpiolib-devres.c
+++ b/drivers/gpio/gpiolib-devres.c
@@ -158,7 +158,7 @@ struct gpio_desc *devm_fwnode_gpiod_get_index(struct device *dev,
 	if (!dr)
 		return ERR_PTR(-ENOMEM);
 
-	desc = fwnode_gpiod_get_index(fwnode, con_id, index, flags, label);
+	desc = gpiod_find_and_request(dev, fwnode, con_id, index, flags, label, false);
 	if (IS_ERR(desc)) {
 		devres_free(dr);
 		return desc;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1d033106cf396..2d8c07a442227 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4127,13 +4127,13 @@ static struct gpio_desc *gpiod_find_by_fwnode(struct fwnode_handle *fwnode,
 	return desc;
 }
 
-static struct gpio_desc *gpiod_find_and_request(struct device *consumer,
-						struct fwnode_handle *fwnode,
-						const char *con_id,
-						unsigned int idx,
-						enum gpiod_flags flags,
-						const char *label,
-						bool platform_lookup_allowed)
+struct gpio_desc *gpiod_find_and_request(struct device *consumer,
+					 struct fwnode_handle *fwnode,
+					 const char *con_id,
+					 unsigned int idx,
+					 enum gpiod_flags flags,
+					 const char *label,
+					 bool platform_lookup_allowed)
 {
 	unsigned long lookupflags = GPIO_LOOKUP_FLAGS_DEFAULT;
 	struct gpio_desc *desc;
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 3ccacf3c1288e..87ec7ba5b6b38 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -207,6 +207,14 @@ static inline int gpiod_request_user(struct gpio_desc *desc, const char *label)
 	return ret;
 }
 
+struct gpio_desc *gpiod_find_and_request(struct device *consumer,
+					 struct fwnode_handle *fwnode,
+					 const char *con_id,
+					 unsigned int idx,
+					 enum gpiod_flags flags,
+					 const char *label,
+					 bool platform_lookup_allowed);
+
 int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 		unsigned long lflags, enum gpiod_flags dflags);
 int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce);
-- 
2.43.0

[PATCH 6.7 318/713] arm64: dts: marvell: reorder crypto interrupts on Armada SoCs

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit ec55a22149d64f9ac41845d923b884d4a666bf4d ]

Match order specified in binding documentation. It says "mem" should be
the last interrupt.

This fixes:
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:0: 'ring0' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:1: 'ring1' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:2: 'ring2' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:3: 'ring3' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:4: 'eip' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:5: 'mem' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  | 10 +++++-----
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e300145ad1a6f..1cc3fa1c354de 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -431,14 +431,14 @@ xor11 {
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 4ec1aae0a3a9c..7e595ac80043a 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -511,14 +511,14 @@ CP11X_LABEL(sdhci0): mmc@780000 {
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
-- 
2.43.0

[PATCH 6.7 319/713] ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override

[Sasha Levin]

From: David McFarland <corngood@gmail.com>

[ Upstream commit e2605d4039a42a03000856b3229932455717b48b ]

A user reported a keyboard problem similar to ones reported with other
Zen laptops, on an Infinity E15-5A165-BM.

Add board name matches for this model and one (untested) close relative
to irq1_edge_low_force_override.

Link: https://lemmy.ml/post/9864736
Link: https://www.infinitygaming.com.au/bios/
Link: https://lore.kernel.org/linux-acpi/20231006123304.32686-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 021a67d09615 ("ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 03b52d31a3e3f..dacad1d846c0d 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -576,6 +576,18 @@ static const struct dmi_system_id irq1_edge_low_force_override[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "GM6BG0Q"),
 		},
 	},
+	{
+		/* Infinity E15-5A165-BM */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GM5RG1E0009COM"),
+		},
+	},
+	{
+		/* Infinity E15-5A305-1M */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GM5RGEE0016COM"),
+		},
+	},
 	{ }
 };
 
-- 
2.43.0

[PATCH 6.7 320/713] ACPI: resource: Do IRQ override on Lunnen Ground laptops

[Sasha Levin]

From: "Alexey I. Froloff" <raorn@raorn.name>

[ Upstream commit e23ad54fef186aa66007895be1382c88f1ee2bf7 ]

The Lunnen Ground 15 and 16 needs IRQ overriding for the keyboard to
work.

Adding an entries for these laptops to the override_table makes the
internal keyboard functional.

Signed-off-by: Alexey I. Froloff <raorn@raorn.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 021a67d09615 ("ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index dacad1d846c0d..3ebb74eb768a5 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -588,6 +588,20 @@ static const struct dmi_system_id irq1_edge_low_force_override[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "GM5RGEE0016COM"),
 		},
 	},
+	{
+		/* Lunnen Ground 15 / AMD Ryzen 5 5500U */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Lunnen"),
+			DMI_MATCH(DMI_BOARD_NAME, "LLL5DAW"),
+		},
+	},
+	{
+		/* Lunnen Ground 16 / AMD Ryzen 7 5800U */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Lunnen"),
+			DMI_MATCH(DMI_BOARD_NAME, "LL6FA"),
+		},
+	},
 	{ }
 };
 
-- 
2.43.0

[PATCH 6.7 321/713] ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override

[Sasha Levin]

From: Maxim Kudinov <m.kudinovv@gmail.com>

[ Upstream commit 021a67d096154893cd1d883c7be0097e2ee327fd ]

A known issue on some Zen laptops, keyboard stopped working due to commit
9946e39fe8d0 fael@kernel.org("ACPI: resource: skip IRQ override on AMD
Zen platforms") on kernel 5.19.10.

The ACPI IRQ override is required for this board due to buggy DSDT, thus
adding the board vendor and name to irq1_edge_low_force_override fixes
the issue.

Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Link: https://lore.kernel.org/linux-acpi/20231006123304.32686-1-hdegoede@redhat.com/
Tested-by: Maxim Trofimov <maxvereschagin@gmail.com>
Signed-off-by: Maxim Kudinov <m.kudinovv@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 3ebb74eb768a5..c843feb02e980 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -602,6 +602,13 @@ static const struct dmi_system_id irq1_edge_low_force_override[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "LL6FA"),
 		},
 	},
+	{
+		/* MAIBENBEN X577 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MAIBENBEN"),
+			DMI_MATCH(DMI_BOARD_NAME, "X577"),
+		},
+	},
 	{ }
 };
 
-- 
2.43.0

[PATCH 6.7 322/713] ACPI: scan: Fix device check notification handling

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 793551c965116d9dfaf0550dacae1396a20efa69 ]

It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).

For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.

While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling

Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/scan.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 02bb2cce423f4..35ad5781f0a5e 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -314,18 +314,14 @@ static int acpi_scan_device_check(struct acpi_device *adev)
 		 * again).
 		 */
 		if (adev->handler) {
-			dev_warn(&adev->dev, "Already enumerated\n");
-			return -EALREADY;
+			dev_dbg(&adev->dev, "Already enumerated\n");
+			return 0;
 		}
 		error = acpi_bus_scan(adev->handle);
 		if (error) {
 			dev_warn(&adev->dev, "Namespace scan failure\n");
 			return error;
 		}
-		if (!adev->handler) {
-			dev_warn(&adev->dev, "Enumeration failure\n");
-			error = -ENODEV;
-		}
 	} else {
 		error = acpi_scan_device_not_enumerated(adev);
 	}
-- 
2.43.0

[PATCH 6.7 323/713] arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu

[Sasha Levin]

From: Heiko Stuebner <heiko@sntech.de>

[ Upstream commit d1c44d9afa6f89aa0e10a191f30868eb12cd719f ]

The video-codec@fdea0400 was missing the interrupt-names property that is
part of the binding. Add it.

Fixes: 944be6fba401 ("arm64: dts: rockchip: Add VPU support for RK3568/RK3566")
Cc: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Acked-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240227173526.710056-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index c19c0f1b3778f..6a9bfb0550c04 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -597,6 +597,7 @@ vpu: video-codec@fdea0400 {
 		compatible = "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdea0000 0x0 0x800>;
 		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "hclk";
 		iommus = <&vdpu_mmu>;
-- 
2.43.0

[PATCH 6.7 324/713] arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller

[Sasha Levin]

From: Heiko Stuebner <heiko@sntech.de>

[ Upstream commit 0fc19ab75acde78558bd0f6fe3e5f63cf8ee88b0 ]

The dtbscheck reports a warning for a wrong reset-names property for
the i2s2 controller on rk356x socs.

The other controllers on the soc provide tx and rx directions and hence
two resets and separate clocks for each direction, while i2s2 only
provides one reset. This was so far named just "m" which isn't part of
the binding.

The clock-names the controller uses all end in "tx", so use the matching
"tx-m" reset-name for the i2s controller.

Fixes: 755f37010f3e ("arm64: dts: rockchip: RK356x: Add I2S2 device node")
Acked-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240227173526.710056-2-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 6a9bfb0550c04..92f96ec01385d 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -1124,7 +1124,7 @@ i2s2_2ch: i2s@fe420000 {
 		dmas = <&dmac1 4>, <&dmac1 5>;
 		dma-names = "tx", "rx";
 		resets = <&cru SRST_M_I2S2_2CH>;
-		reset-names = "m";
+		reset-names = "tx-m";
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m0_sclktx
-- 
2.43.0

[PATCH 6.7 325/713] arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s

[Sasha Levin]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

[ Upstream commit a8037ceb89649659831e86a87a9329d1bb43c735 ]

The rockchip,trcm-sync-tx-only property is at this time only documented
for the tdm variant of Rockchip i2s controllers.

While there was a series [0] adding code and binding for the property,
it doesn't seem to have gone forward back in 2021.

So for now fix the devicetree check by removing the property from rk3588
i2s controllers until support for it gets merged.

[0] https://patchwork.kernel.org/project/linux-rockchip/patch/1629796734-4243-5-git-send-email-sugar.zhang@rock-chips.com/

Fixes: 8ae112a5554f ("arm64: dts: rockchip: Add rk3588s I2S nodes")
Cc: Sugar Zhang <sugar.zhang@rock-chips.com>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240227164659.705271-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index f9f9749848bd9..1d262cd54c990 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -1589,7 +1589,6 @@ i2s2_2ch: i2s@fe490000 {
 		dmas = <&dmac1 0>, <&dmac1 1>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m1_lrck
 			     &i2s2m1_sclk
@@ -1610,7 +1609,6 @@ i2s3_2ch: i2s@fe4a0000 {
 		dmas = <&dmac1 2>, <&dmac1 3>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s3_lrck
 			     &i2s3_sclk
-- 
2.43.0

[PATCH 6.7 326/713] iommu/arm-smmu-v3: Check that the RID domain is S1 in SVA

[Sasha Levin]

From: Jason Gunthorpe <jgg@nvidia.com>

[ Upstream commit ae91f6552c301e5e8569667e9d5440d5f75a90c4 ]

The SVA code only works if the RID domain is a S1 domain and has already
installed the cdtable.

Originally the check for this was in arm_smmu_sva_bind() but when the op
was removed the test didn't get copied over to the new
arm_smmu_sva_set_dev_pasid().

Without the test wrong usage usually will hit a WARN_ON() in
arm_smmu_write_ctx_desc() due to a missing ctx table.

However, the next patches wil change things so that an IDENTITY domain is
not a struct arm_smmu_domain and this will get into memory corruption if
the struct is wrongly casted.

Fail in arm_smmu_sva_set_dev_pasid() if the STE does not have a S1, which
is a proxy for the STE having a pointer to the CD table. Write it in a way
that will be compatible with the next patches.

Fixes: 386fa64fd52b ("arm-smmu-v3/sva: Add SVA domain support")
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Closes: https://lore.kernel.org/linux-iommu/2a828e481416405fb3a4cceb9e075a59@huawei.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
index 4a27fbdb2d844..2610e82c0ecd0 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -364,7 +364,13 @@ static int __arm_smmu_sva_bind(struct device *dev, ioasid_t pasid,
 	struct arm_smmu_bond *bond;
 	struct arm_smmu_master *master = dev_iommu_priv_get(dev);
 	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
-	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+	struct arm_smmu_domain *smmu_domain;
+
+	if (!(domain->type & __IOMMU_DOMAIN_PAGING))
+		return -ENODEV;
+	smmu_domain = to_smmu_domain(domain);
+	if (smmu_domain->stage != ARM_SMMU_DOMAIN_S1)
+		return -ENODEV;
 
 	if (!master || !master->sva_enabled)
 		return -ENODEV;
-- 
2.43.0

[PATCH 6.7 327/713] objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@kernel.org>

[ Upstream commit 10b4c4bce3f5541f54bcc2039720b11d2bc96d79 ]

If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:

  vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo

In such a case, defer following the RESTORE block until the
straight-line path gets followed later.

Fixes: 8faea26e6111 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index e94756e09ca9f..167603f839851 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -3620,6 +3620,18 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
 				}
 
 				if (!save_insn->visited) {
+					/*
+					 * If the restore hint insn is at the
+					 * beginning of a basic block and was
+					 * branched to from elsewhere, and the
+					 * save insn hasn't been visited yet,
+					 * defer following this branch for now.
+					 * It will be seen later via the
+					 * straight-line path.
+					 */
+					if (!prev_insn)
+						return 0;
+
 					WARN_INSN(insn, "objtool isn't smart enough to handle this CFI save/restore combo");
 					return 1;
 				}
-- 
2.43.0

[PATCH 6.7 328/713] x86, relocs: Ignore relocations in .notes section

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit aaa8736370db1a78f0e8434344a484f9fd20be3b ]

When building with CONFIG_XEN_PV=y, .text symbols are emitted into
the .notes section so that Xen can find the "startup_xen" entry point.
This information is used prior to booting the kernel, so relocations
are not useful. In fact, performing relocations against the .notes
section means that the KASLR base is exposed since /sys/kernel/notes
is world-readable.

To avoid leaking the KASLR base without breaking unprivileged tools that
are expecting to read /sys/kernel/notes, skip performing relocations in
the .notes section. The values readable in .notes are then identical to
those found in System.map.

Reported-by: Guixiong Wei <guixiongwei@gmail.com>
Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/
Fixes: 5ead97c84fa7 ("xen: Core Xen implementation")
Fixes: da1a679cde9b ("Add /sys/kernel/notes")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/tools/relocs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index d30949e25ebd9..e7013283640f5 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -653,6 +653,14 @@ static void print_absolute_relocs(void)
 		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
 			continue;
 		}
+		/*
+		 * Do not perform relocations in .notes section; any
+		 * values there are meant for pre-boot consumption (e.g.
+		 * startup_xen).
+		 */
+		if (sec_applies->shdr.sh_type == SHT_NOTE) {
+			continue;
+		}
 		sh_symtab  = sec_symtab->symtab;
 		sym_strtab = sec_symtab->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
-- 
2.43.0

[PATCH 6.7 329/713] SUNRPC: fix a memleak in gss_import_v2_context

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit e67b652d8e8591d3b1e569dbcdfcee15993e91fa ]

The ctx->mech_used.data allocated by kmemdup is not freed in neither
gss_import_v2_context nor it only caller gss_krb5_import_sec_context,
which frees ctx on error.

Thus, this patch reform the last call of gss_import_v2_context to the
gss_krb5_import_ctx_v2, preventing the memleak while keepping the return
formation.

Fixes: 47d848077629 ("gss_krb5: handle new context format from gssd")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_krb5_mech.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index e31cfdf7eadcb..f6fc80e1d658b 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -398,6 +398,7 @@ gss_import_v2_context(const void *p, const void *end, struct krb5_ctx *ctx,
 	u64 seq_send64;
 	int keylen;
 	u32 time32;
+	int ret;
 
 	p = simple_get_bytes(p, end, &ctx->flags, sizeof(ctx->flags));
 	if (IS_ERR(p))
@@ -450,8 +451,16 @@ gss_import_v2_context(const void *p, const void *end, struct krb5_ctx *ctx,
 	}
 	ctx->mech_used.len = gss_kerberos_mech.gm_oid.len;
 
-	return gss_krb5_import_ctx_v2(ctx, gfp_mask);
+	ret = gss_krb5_import_ctx_v2(ctx, gfp_mask);
+	if (ret) {
+		p = ERR_PTR(ret);
+		goto out_free;
+	}
 
+	return 0;
+
+out_free:
+	kfree(ctx->mech_used.data);
 out_err:
 	return PTR_ERR(p);
 }
-- 
2.43.0

[PATCH 6.7 330/713] SUNRPC: fix some memleaks in gssx_dec_option_array

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 3cfcfc102a5e57b021b786a755a38935e357797d ]

The creds and oa->data need to be freed in the error-handling paths after
their allocation. So this patch add these deallocations in the
corresponding paths.

Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_rpc_xdr.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c
index d79f12c2550ac..cb32ab9a83952 100644
--- a/net/sunrpc/auth_gss/gss_rpc_xdr.c
+++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c
@@ -250,8 +250,8 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 	creds = kzalloc(sizeof(struct svc_cred), GFP_KERNEL);
 	if (!creds) {
-		kfree(oa->data);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto free_oa;
 	}
 
 	oa->data[0].option.data = CREDS_VALUE;
@@ -265,29 +265,40 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 		/* option buffer */
 		p = xdr_inline_decode(xdr, 4);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		length = be32_to_cpup(p);
 		p = xdr_inline_decode(xdr, length);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		if (length == sizeof(CREDS_VALUE) &&
 		    memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) {
 			/* We have creds here. parse them */
 			err = gssx_dec_linux_creds(xdr, creds);
 			if (err)
-				return err;
+				goto free_creds;
 			oa->data[0].value.len = 1; /* presence */
 		} else {
 			/* consume uninteresting buffer */
 			err = gssx_dec_buffer(xdr, &dummy);
 			if (err)
-				return err;
+				goto free_creds;
 		}
 	}
 	return 0;
+
+free_creds:
+	kfree(creds);
+free_oa:
+	kfree(oa->data);
+	oa->data = NULL;
+	return err;
 }
 
 static int gssx_dec_status(struct xdr_stream *xdr,
-- 
2.43.0

[PATCH 6.7 331/713] arm64: dts: qcom: sm8550: Fix SPMI channels size

[Sasha Levin]

From: Abel Vesa <abel.vesa@linaro.org>

[ Upstream commit 77dd1e50ffcba33c3195ae4fc78f354368ddacb2 ]

The actual size of the channels registers region is 4MB, according to the
documentation. This issue was not caught until now because the driver was
supposed to allow same regions being mapped multiple times for supporting
multiple buses. Thie driver is using platform_get_resource_byname() and
devm_ioremap() towards that purpose, which intentionally avoids
devm_request_mem_region() altogether.

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-1-72b5efd9dc4f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index e15564ed54cef..d7e68e0f57131 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -3047,7 +3047,7 @@ sram@c3f0000 {
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
-- 
2.43.0

[PATCH 6.7 332/713] mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ae5004a40a262d329039b99b62bd3fe7645b66ad ]

This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.

So remove the corresponding code.

Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/wmt-sdmmc.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index 77d5f1d244899..860380931b6cd 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -883,7 +883,6 @@ static void wmt_mci_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct wmt_mci_priv *priv;
-	struct resource *res;
 	u32 reg_tmp;
 
 	mmc = platform_get_drvdata(pdev);
@@ -911,9 +910,6 @@ static void wmt_mci_remove(struct platform_device *pdev)
 	clk_disable_unprepare(priv->clk_sdmmc);
 	clk_put(priv->clk_sdmmc);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
 	mmc_free_host(mmc);
 
 	dev_info(&pdev->dev, "WMT MCI device removed\n");
-- 
2.43.0

[PATCH 6.7 333/713] ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors

[Sasha Levin]

From: Perry Yuan <perry.yuan@amd.com>

[ Upstream commit a51ab63b297ce9e26e3ffb9be896018a42d5f32f ]

As there are some AMD processors which only support CPPC V2 firmware and
BIOS implementation, the amd_pstate driver will be failed to load when
system booting with below kernel warning message:

[    0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled

To make the amd_pstate driver can be loaded on those TR40 processors, it
needs to match x86_model from 0x30 to 0x7F for family 17H.
With the change, the system can load amd_pstate driver as expected.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Gino Badouri <badouri.g@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218171
Fixes: fbd74d1689 ("ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/acpi/cppc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
index 8d8752b44f113..ff8f25faca3dd 100644
--- a/arch/x86/kernel/acpi/cppc.c
+++ b/arch/x86/kernel/acpi/cppc.c
@@ -20,7 +20,7 @@ bool cpc_supported_by_cpu(void)
 		    (boot_cpu_data.x86_model >= 0x20 && boot_cpu_data.x86_model <= 0x2f)))
 			return true;
 		else if (boot_cpu_data.x86 == 0x17 &&
-			 boot_cpu_data.x86_model >= 0x70 && boot_cpu_data.x86_model <= 0x7f)
+			 boot_cpu_data.x86_model >= 0x30 && boot_cpu_data.x86_model <= 0x7f)
 			return true;
 		return boot_cpu_has(X86_FEATURE_CPPC);
 	}
-- 
2.43.0

[PATCH 6.7 334/713] wifi: rtw88: 8821cu: Fix firmware upload fail

[Sasha Levin]

From: Bitterblue Smith <rtl8821cerfe2@gmail.com>

[ Upstream commit 41a7acb7dde8395f52a707bbba7712a898dfafb0 ]

RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after
reading and writing certain addresses.

Without this, the firmware upload fails approximately more than 50% of
the time.

Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU
but without Bluetooth.

Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/usb.c | 40 ++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/usb.c b/drivers/net/wireless/realtek/rtw88/usb.c
index e6ab1ac6d7093..a0188511099a1 100644
--- a/drivers/net/wireless/realtek/rtw88/usb.c
+++ b/drivers/net/wireless/realtek/rtw88/usb.c
@@ -33,6 +33,36 @@ static void rtw_usb_fill_tx_checksum(struct rtw_usb *rtwusb,
 	rtw_tx_fill_txdesc_checksum(rtwdev, &pkt_info, skb->data);
 }
 
+static void rtw_usb_reg_sec(struct rtw_dev *rtwdev, u32 addr, __le32 *data)
+{
+	struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
+	struct usb_device *udev = rtwusb->udev;
+	bool reg_on_section = false;
+	u16 t_reg = 0x4e0;
+	u8 t_len = 1;
+	int status;
+
+	/* There are three sections:
+	 * 1. on (0x00~0xFF; 0x1000~0x10FF): this section is always powered on
+	 * 2. off (< 0xFE00, excluding "on" section): this section could be
+	 *    powered off
+	 * 3. local (>= 0xFE00): usb specific registers section
+	 */
+	if (addr <= 0xff || (addr >= 0x1000 && addr <= 0x10ff))
+		reg_on_section = true;
+
+	if (!reg_on_section)
+		return;
+
+	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				 RTW_USB_CMD_REQ, RTW_USB_CMD_WRITE,
+				 t_reg, 0, data, t_len, 500);
+
+	if (status != t_len && status != -ENODEV)
+		rtw_err(rtwdev, "%s: reg 0x%x, usb write %u fail, status: %d\n",
+			__func__, t_reg, t_len, status);
+}
+
 static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len)
 {
 	struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
@@ -58,6 +88,11 @@ static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len)
 		rtw_err(rtwdev, "read register 0x%x failed with %d\n",
 			addr, ret);
 
+	if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C ||
+	    rtwdev->chip->id == RTW_CHIP_TYPE_8822B ||
+	    rtwdev->chip->id == RTW_CHIP_TYPE_8821C)
+		rtw_usb_reg_sec(rtwdev, addr, data);
+
 	return le32_to_cpu(*data);
 }
 
@@ -102,6 +137,11 @@ static void rtw_usb_write(struct rtw_dev *rtwdev, u32 addr, u32 val, int len)
 	if (ret < 0 && ret != -ENODEV && count++ < 4)
 		rtw_err(rtwdev, "write register 0x%x failed with %d\n",
 			addr, ret);
+
+	if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C ||
+	    rtwdev->chip->id == RTW_CHIP_TYPE_8822B ||
+	    rtwdev->chip->id == RTW_CHIP_TYPE_8821C)
+		rtw_usb_reg_sec(rtwdev, addr, data);
 }
 
 static void rtw_usb_write8(struct rtw_dev *rtwdev, u32 addr, u8 val)
-- 
2.43.0

[PATCH 6.7 335/713] wifi: rtw88: 8821c: Fix beacon loss and disconnect

[Sasha Levin]

From: Bitterblue Smith <rtl8821cerfe2@gmail.com>

[ Upstream commit e1dfa21427baeb813f9a2f9ceab6b7d32c3ca425 ]

Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because
of frequent disconnections:

Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
	bssid=90:55:de:__:__:__ reason=4 locally_generated=1

Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
	- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
	bssid=90:55:de:__:__:__ reason=4 locally_generated=1

Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
	- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
	bssid=90:55:de:__:__:__ reason=4 locally_generated=1

This is caused by a mistake in the chip initialisation. This version of
the chip requires loading an extra AGC table right after the main one,
but the extra table is being loaded at the wrong time, in
rtw_chip_board_info_setup().

Move the extra AGC table loading to the right place, in
rtw_phy_load_tables().

The rtw_chip_board_info_setup() can only do "software" things, and
rtw_phy_load_tables() can really do IO.

Fixes: 5d6651fe8583 ("rtw88: 8821c: support RFE type2 wifi NIC")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/main.c | 2 --
 drivers/net/wireless/realtek/rtw88/phy.c  | 3 +++
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 4a33d2e47f33f..63673005c2fb1 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -2027,8 +2027,6 @@ static int rtw_chip_board_info_setup(struct rtw_dev *rtwdev)
 	rtw_phy_setup_phy_cond(rtwdev, hal->pkg_type);
 
 	rtw_phy_init_tx_power(rtwdev);
-	if (rfe_def->agc_btg_tbl)
-		rtw_load_table(rtwdev, rfe_def->agc_btg_tbl);
 	rtw_load_table(rtwdev, rfe_def->phy_pg_tbl);
 	rtw_load_table(rtwdev, rfe_def->txpwr_lmt_tbl);
 	rtw_phy_tx_power_by_rate_config(hal);
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index 128e75a81bf3c..37ef80c9091db 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -1761,12 +1761,15 @@ static void rtw_load_rfk_table(struct rtw_dev *rtwdev)
 
 void rtw_phy_load_tables(struct rtw_dev *rtwdev)
 {
+	const struct rtw_rfe_def *rfe_def = rtw_get_rfe_def(rtwdev);
 	const struct rtw_chip_info *chip = rtwdev->chip;
 	u8 rf_path;
 
 	rtw_load_table(rtwdev, chip->mac_tbl);
 	rtw_load_table(rtwdev, chip->bb_tbl);
 	rtw_load_table(rtwdev, chip->agc_tbl);
+	if (rfe_def->agc_btg_tbl)
+		rtw_load_table(rtwdev, rfe_def->agc_btg_tbl);
 	rtw_load_rfk_table(rtwdev);
 
 	for (rf_path = 0; rf_path < rtwdev->hal.rf_path_num; rf_path++) {
-- 
2.43.0

[PATCH 6.7 336/713] wifi: rtw88: 8821c: Fix false alarm count

[Sasha Levin]

From: Bitterblue Smith <rtl8821cerfe2@gmail.com>

[ Upstream commit c238adbc578eeb70cbc8fdd1bef3666b0f585b13 ]

total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just
ofdm_fa_cnt.

Fixes: 960361238b86 ("rtw88: 8821c: add false alarm statistics")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index 429bb420b0563..fe5d8e1883509 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -773,9 +773,9 @@ static void rtw8821c_false_alarm_statistics(struct rtw_dev *rtwdev)
 
 	dm_info->cck_fa_cnt = cck_fa_cnt;
 	dm_info->ofdm_fa_cnt = ofdm_fa_cnt;
+	dm_info->total_fa_cnt = ofdm_fa_cnt;
 	if (cck_enable)
 		dm_info->total_fa_cnt += cck_fa_cnt;
-	dm_info->total_fa_cnt = ofdm_fa_cnt;
 
 	crc32_cnt = rtw_read32(rtwdev, REG_CRC_CCK);
 	dm_info->cck_ok_cnt = FIELD_GET(GENMASK(15, 0), crc32_cnt);
-- 
2.43.0

[PATCH 6.7 337/713] wifi: brcm80211: handle pmk_op allocation failure

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit b4152222e04cb8afeeca239c90e3fcaf4c553b42 ]

The kzalloc() in brcmf_pmksa_v3_op() will return null if the
physical memory has run out. As a result, if we dereference
the null value, the null pointer dereference bug will happen.

Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails
for pmk_op.

Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 44cea18dd20ed..8facd40d713e6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4322,6 +4322,9 @@ brcmf_pmksa_v3_op(struct brcmf_if *ifp, struct cfg80211_pmksa *pmksa,
 	int ret;
 
 	pmk_op = kzalloc(sizeof(*pmk_op), GFP_KERNEL);
+	if (!pmk_op)
+		return -ENOMEM;
+
 	pmk_op->version = cpu_to_le16(BRCMF_PMKSA_VER_3);
 
 	if (!pmksa) {
-- 
2.43.0

[PATCH 6.7 338/713] PCI: Make pci_dev_is_disconnected() helper public for other drivers

[Sasha Levin]

From: Ethan Zhao <haifeng.zhao@linux.intel.com>

[ Upstream commit 39714fd73c6b60a8d27bcc5b431afb0828bf4434 ]

Make pci_dev_is_disconnected() public so that it can be called from
Intel VT-d driver to quickly fix/workaround the surprise removal
unplug hang issue for those ATS capable devices on PCIe switch downstream
hotplug capable ports.

Beside pci_device_is_present() function, this one has no config space
space access, so is light enough to optimize the normal pure surprise
removal and safe removal flow.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.h   | 5 -----
 include/linux/pci.h | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 24ae29f0d36d7..1697cb8289d49 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -366,11 +366,6 @@ static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
 	return 0;
 }
 
-static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
-{
-	return dev->error_state == pci_channel_io_perm_failure;
-}
-
 /* pci_dev priv_flags */
 #define PCI_DEV_ADDED 0
 #define PCI_DPC_RECOVERED 1
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 675937a5bd7ce..ca0e61c838e83 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2511,6 +2511,11 @@ static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
 	return NULL;
 }
 
+static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
+{
+	return dev->error_state == pci_channel_io_perm_failure;
+}
+
 void pci_request_acs(void);
 bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
 bool pci_acs_path_enabled(struct pci_dev *start,
-- 
2.43.0

[PATCH 6.7 339/713] iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected

[Sasha Levin]

From: Ethan Zhao <haifeng.zhao@linux.intel.com>

[ Upstream commit 4fc82cd907ac075648789cc3a00877778aa1838b ]

For those endpoint devices connect to system via hotplug capable ports,
users could request a hot reset to the device by flapping device's link
through setting the slot's link control register, as pciehp_ist() DLLSC
interrupt sequence response, pciehp will unload the device driver and
then power it off. thus cause an IOMMU device-TLB invalidation (Intel
VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for non-existence
target device to be sent and deadly loop to retry that request after ITE
fault triggered in interrupt context.

That would cause following continuous hard lockup warning and system hang

[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
         OE    kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS:  0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629]  intel_iommu_release_device+0x1f/0x30
[ 4223.822629]  iommu_release_device+0x33/0x60
[ 4223.822629]  iommu_bus_notifier+0x7f/0x90
[ 4223.822630]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822630]  device_del+0x2e5/0x420
[ 4223.822630]  pci_remove_bus_device+0x70/0x110
[ 4223.822630]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631]  pciehp_disable_slot+0x6b/0x100
[ 4223.822631]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631]  pciehp_ist+0x176/0x180
[ 4223.822631]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632]  irq_thread_fn+0x19/0x50
[ 4223.822632]  irq_thread+0x104/0x190
[ 4223.822632]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633]  kthread+0x114/0x130
[ 4223.822633]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822633]  ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
         OE     kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634]  <NMI>
[ 4223.822635]  dump_stack+0x6d/0x88
[ 4223.822635]  panic+0x101/0x2d0
[ 4223.822635]  ? ret_from_fork+0x11/0x30
[ 4223.822635]  nmi_panic.cold.14+0xc/0xc
[ 4223.822636]  watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636]  __perf_event_overflow+0x4f/0xf0
[ 4223.822636]  handle_pmi_common+0x1ef/0x290
[ 4223.822636]  ? __set_pte_vaddr+0x28/0x40
[ 4223.822637]  ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637]  ? __native_set_fixmap+0x24/0x30
[ 4223.822637]  ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637]  ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637]  intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638]  perf_event_nmi_handler+0x24/0x40
[ 4223.822638]  nmi_handle+0x4d/0xf0
[ 4223.822638]  default_do_nmi+0x49/0x100
[ 4223.822638]  exc_nmi+0x134/0x180
[ 4223.822639]  end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  </NMI>
[ 4223.822642]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643]  intel_iommu_release_device+0x1f/0x30
[ 4223.822643]  iommu_release_device+0x33/0x60
[ 4223.822643]  iommu_bus_notifier+0x7f/0x90
[ 4223.822644]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822644]  device_del+0x2e5/0x420
[ 4223.822644]  pci_remove_bus_device+0x70/0x110
[ 4223.822644]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644]  pciehp_disable_slot+0x6b/0x100
[ 4223.822645]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645]  pciehp_ist+0x176/0x180
[ 4223.822645]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645]  irq_thread_fn+0x19/0x50
[ 4223.822646]  irq_thread+0x104/0x190
[ 4223.822646]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646]  kthread+0x114/0x130
[ 4223.822647]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822647]  ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)

Such issue could be triggered by all kinds of regular surprise removal
hotplug operation. like:

1. pull EP(endpoint device) out directly.
2. turn off EP's power.
3. bring the link down.
etc.

this patch aims to work for regular safe removal and surprise removal
unplug. these hot unplug handling process could be optimized for fix the
ATS Invalidation hang issue by calling pci_dev_is_disconnected() in
function devtlb_invalidation_with_pasid() to check target device state to
avoid sending meaningless ATS Invalidation request to iommu when device is
gone. (see IMPLEMENTATION NOTE in PCIe spec r6.1 section 10.3.1)

For safe removal, device wouldn't be removed until the whole software
handling process is done, it wouldn't trigger the hard lock up issue
caused by too long ATS Invalidation timeout wait. In safe removal path,
device state isn't set to pci_channel_io_perm_failure in
pciehp_unconfigure_device() by checking 'presence' parameter, calling
pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will return
false there, wouldn't break the function.

For surprise removal, device state is set to pci_channel_io_perm_failure in
pciehp_unconfigure_device(), means device is already gone (disconnected)
call pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will
return true to break the function not to send ATS Invalidation request to
the disconnected device blindly, thus avoid to trigger further ITE fault,
and ITE fault will block all invalidation request to be handled.
furthermore retry the timeout request could trigger hard lockup.

safe removal (present) & surprise removal (not present)

pciehp_ist()
   pciehp_handle_presence_or_link_change()
     pciehp_disable_slot()
       remove_board()
         pciehp_unconfigure_device(presence) {
           if (!presence)
                pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
           }

this patch works for regular safe removal and surprise removal of ATS
capable endpoint on PCIe switch downstream ports.

Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-3-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/pasid.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 6e102cbbde845..cc2490e5cfb6b 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu,
 	if (!info || !info->ats_enabled)
 		return;
 
+	if (pci_dev_is_disconnected(to_pci_dev(dev)))
+		return;
+
 	sid = info->bus << 8 | info->devfn;
 	qdep = info->ats_qdep;
 	pfsid = info->pfsid;
-- 
2.43.0

[PATCH 6.7 340/713] igc: Fix missing time sync events

[Sasha Levin]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit 244ae992e3e80e5c9c272c77324c831148457f95 ]

Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.

The IGC_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.

The following flow was used:
 1. read IGC_TSIRC into 'tsicr';
 2. handle the interrupts present in 'tsirc' and mark them in 'ack';
 3. write 'ack' into IGC_TSICR;

As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.

Remove the extra clear in (3).

Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 58ffddc6419ad..45716d271d955 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -5304,25 +5304,22 @@ igc_features_check(struct sk_buff *skb, struct net_device *dev,
 
 static void igc_tsync_interrupt(struct igc_adapter *adapter)
 {
-	u32 ack, tsauxc, sec, nsec, tsicr;
 	struct igc_hw *hw = &adapter->hw;
+	u32 tsauxc, sec, nsec, tsicr;
 	struct ptp_clock_event event;
 	struct timespec64 ts;
 
 	tsicr = rd32(IGC_TSICR);
-	ack = 0;
 
 	if (tsicr & IGC_TSICR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
 		if (adapter->ptp_caps.pps)
 			ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= IGC_TSICR_SYS_WRAP;
 	}
 
 	if (tsicr & IGC_TSICR_TXTS) {
 		/* retrieve hardware timestamp */
 		igc_ptp_tx_tstamp_event(adapter);
-		ack |= IGC_TSICR_TXTS;
 	}
 
 	if (tsicr & IGC_TSICR_TT0) {
@@ -5336,7 +5333,6 @@ static void igc_tsync_interrupt(struct igc_adapter *adapter)
 		wr32(IGC_TSAUXC, tsauxc);
 		adapter->perout[0].start = ts;
 		spin_unlock(&adapter->tmreg_lock);
-		ack |= IGC_TSICR_TT0;
 	}
 
 	if (tsicr & IGC_TSICR_TT1) {
@@ -5350,7 +5346,6 @@ static void igc_tsync_interrupt(struct igc_adapter *adapter)
 		wr32(IGC_TSAUXC, tsauxc);
 		adapter->perout[1].start = ts;
 		spin_unlock(&adapter->tmreg_lock);
-		ack |= IGC_TSICR_TT1;
 	}
 
 	if (tsicr & IGC_TSICR_AUTT0) {
@@ -5360,7 +5355,6 @@ static void igc_tsync_interrupt(struct igc_adapter *adapter)
 		event.index = 0;
 		event.timestamp = sec * NSEC_PER_SEC + nsec;
 		ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= IGC_TSICR_AUTT0;
 	}
 
 	if (tsicr & IGC_TSICR_AUTT1) {
@@ -5370,11 +5364,7 @@ static void igc_tsync_interrupt(struct igc_adapter *adapter)
 		event.index = 1;
 		event.timestamp = sec * NSEC_PER_SEC + nsec;
 		ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= IGC_TSICR_AUTT1;
 	}
-
-	/* acknowledge the interrupts */
-	wr32(IGC_TSICR, ack);
 }
 
 /**
-- 
2.43.0

[PATCH 6.7 341/713] igb: Fix missing time sync events

[Sasha Levin]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit ee14cc9ea19ba9678177e2224a9c58cce5937c73 ]

Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.

The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.

The following flow was used:
    1. read E1000_TSIRC into 'tsicr';
    2. handle the interrupts present into 'tsirc' and mark them in 'ack';
    3. write 'ack' into E1000_TSICR;

As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.

Remove the extra clear in (3).

Fixes: 00c65578b47b ("igb: enable internal PPS for the i210")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b2295caa2f0ab..ada42ba635498 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6984,44 +6984,31 @@ static void igb_extts(struct igb_adapter *adapter, int tsintr_tt)
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ack = 0, tsicr = rd32(E1000_TSICR);
+	u32 tsicr = rd32(E1000_TSICR);
 	struct ptp_clock_event event;
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
 		if (adapter->ptp_caps.pps)
 			ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= TSINTR_SYS_WRAP;
 	}
 
 	if (tsicr & E1000_TSICR_TXTS) {
 		/* retrieve hardware timestamp */
 		schedule_work(&adapter->ptp_tx_work);
-		ack |= E1000_TSICR_TXTS;
 	}
 
-	if (tsicr & TSINTR_TT0) {
+	if (tsicr & TSINTR_TT0)
 		igb_perout(adapter, 0);
-		ack |= TSINTR_TT0;
-	}
 
-	if (tsicr & TSINTR_TT1) {
+	if (tsicr & TSINTR_TT1)
 		igb_perout(adapter, 1);
-		ack |= TSINTR_TT1;
-	}
 
-	if (tsicr & TSINTR_AUTT0) {
+	if (tsicr & TSINTR_AUTT0)
 		igb_extts(adapter, 0);
-		ack |= TSINTR_AUTT0;
-	}
 
-	if (tsicr & TSINTR_AUTT1) {
+	if (tsicr & TSINTR_AUTT1)
 		igb_extts(adapter, 1);
-		ack |= TSINTR_AUTT1;
-	}
-
-	/* acknowledge the interrupts */
-	wr32(E1000_TSICR, ack);
 }
 
 static irqreturn_t igb_msix_other(int irq, void *data)
-- 
2.43.0

[PATCH 6.7 342/713] ice: fix stats being updated by way too large values

[Sasha Levin]

From: Przemek Kitszel <przemyslaw.kitszel@intel.com>

[ Upstream commit 257310e998700e60382fbd3f4fd275fdbd9b2aaf ]

Simplify stats accumulation logic to fix the case where we don't take
previous stat value into account, we should always respect it.

Main netdev stats of our PF (Tx/Rx packets/bytes) were reported orders of
magnitude too big during OpenStack reconfiguration events, possibly other
reconfiguration cases too.

The regression was reported to be between 6.1 and 6.2, so I was almost
certain that on of the two "preserve stats over reset" commits were the
culprit. While reading the code, it was found that in some cases we will
increase the stats by arbitrarily large number (thanks to ignoring "-prev"
part of condition, after zeroing it).

Note that this fixes also the case where we were around limits of u64, but
that was not the regression reported.

Full disclosure: I remember suggesting this particular piece of code to
Ben a few years ago, so blame on me.

Fixes: 2fd5e433cd26 ("ice: Accumulate HW and Netdev statistics over reset")
Reported-by: Nebojsa Stevanovic <nebojsa.stevanovic@gcore.com>
Link: https://lore.kernel.org/intel-wired-lan/VI1PR02MB439744DEDAA7B59B9A2833FE912EA@VI1PR02MB4397.eurprd02.prod.outlook.com
Reported-by: Christian Rohmann <christian.rohmann@inovex.de>
Link: https://lore.kernel.org/intel-wired-lan/f38a6ca4-af05-48b1-a3e6-17ef2054e525@inovex.de
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 24 +++++++++++------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index a9cca2d24120a..dabf33cec3e1b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -6572,6 +6572,7 @@ static void ice_update_vsi_ring_stats(struct ice_vsi *vsi)
 {
 	struct rtnl_link_stats64 *net_stats, *stats_prev;
 	struct rtnl_link_stats64 *vsi_stats;
+	struct ice_pf *pf = vsi->back;
 	u64 pkts, bytes;
 	int i;
 
@@ -6617,21 +6618,18 @@ static void ice_update_vsi_ring_stats(struct ice_vsi *vsi)
 	net_stats = &vsi->net_stats;
 	stats_prev = &vsi->net_stats_prev;
 
-	/* clear prev counters after reset */
-	if (vsi_stats->tx_packets < stats_prev->tx_packets ||
-	    vsi_stats->rx_packets < stats_prev->rx_packets) {
-		stats_prev->tx_packets = 0;
-		stats_prev->tx_bytes = 0;
-		stats_prev->rx_packets = 0;
-		stats_prev->rx_bytes = 0;
+	/* Update netdev counters, but keep in mind that values could start at
+	 * random value after PF reset. And as we increase the reported stat by
+	 * diff of Prev-Cur, we need to be sure that Prev is valid. If it's not,
+	 * let's skip this round.
+	 */
+	if (likely(pf->stat_prev_loaded)) {
+		net_stats->tx_packets += vsi_stats->tx_packets - stats_prev->tx_packets;
+		net_stats->tx_bytes += vsi_stats->tx_bytes - stats_prev->tx_bytes;
+		net_stats->rx_packets += vsi_stats->rx_packets - stats_prev->rx_packets;
+		net_stats->rx_bytes += vsi_stats->rx_bytes - stats_prev->rx_bytes;
 	}
 
-	/* update netdev counters */
-	net_stats->tx_packets += vsi_stats->tx_packets - stats_prev->tx_packets;
-	net_stats->tx_bytes += vsi_stats->tx_bytes - stats_prev->tx_bytes;
-	net_stats->rx_packets += vsi_stats->rx_packets - stats_prev->rx_packets;
-	net_stats->rx_bytes += vsi_stats->rx_bytes - stats_prev->rx_bytes;
-
 	stats_prev->tx_packets = vsi_stats->tx_packets;
 	stats_prev->tx_bytes = vsi_stats->tx_bytes;
 	stats_prev->rx_packets = vsi_stats->rx_packets;
-- 
2.43.0

[PATCH 6.7 343/713] Bluetooth: Remove HCI_POWER_OFF_TIMEOUT

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit 968667f2e0345a67a6eea5a502f4659085666564 ]

With commit cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED"),
the power off sequence got refactored so that this timeout was no longer
necessary, let's remove the leftover define from the header too.

Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index bdee5d649cc61..f7918c7551834 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -437,7 +437,6 @@ enum {
 #define HCI_NCMD_TIMEOUT	msecs_to_jiffies(4000)	/* 4 seconds */
 #define HCI_ACL_TX_TIMEOUT	msecs_to_jiffies(45000)	/* 45 seconds */
 #define HCI_AUTO_OFF_TIMEOUT	msecs_to_jiffies(2000)	/* 2 seconds */
-#define HCI_POWER_OFF_TIMEOUT	msecs_to_jiffies(5000)	/* 5 seconds */
 #define HCI_LE_CONN_TIMEOUT	msecs_to_jiffies(20000)	/* 20 seconds */
 #define HCI_LE_AUTOCONN_TIMEOUT	msecs_to_jiffies(4000)	/* 4 seconds */
 
-- 
2.43.0

[PATCH 6.7 344/713] Bluetooth: mgmt: Remove leftover queuing of power_off work

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit fee054b7579fe252f8b9e6c17b9c5bfdaa84dd7e ]

Queuing of power_off work was introduced in these functions with commits
8b064a3ad377 ("Bluetooth: Clean up HCI state when doing power off") and
c9910d0fb4fc ("Bluetooth: Fix disconnecting connections in non-connected
states") in an effort to clean up state and do things like disconnecting
devices before actually powering off the device.

After that, commit a3172b7eb4a2 ("Bluetooth: Add timer to force power off")
introduced a timeout to ensure that the device actually got powered off,
even if some of the cleanup work would never complete.

This code later got refactored with commit cf75ad8b41d2 ("Bluetooth:
hci_sync: Convert MGMT_SET_POWERED"), which made powering off the device
synchronous and removed the need for initiating the power_off work from
other places. The timeout mentioned above got removed too, because we now
also made use of the command timeout during power on/off.

These days the power_off work still exists, but it only seems to only be
used for HCI_AUTO_OFF functionality, which is why we never noticed
those two leftover places where we queue power_off work. So let's remove
that code.

Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2448a154a4069..324f06e2e9ddb 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -9766,14 +9766,6 @@ void mgmt_device_disconnected(struct hci_dev *hdev, bdaddr_t *bdaddr,
 	struct mgmt_ev_device_disconnected ev;
 	struct sock *sk = NULL;
 
-	/* The connection is still in hci_conn_hash so test for 1
-	 * instead of 0 to know if this is the last one.
-	 */
-	if (mgmt_powering_down(hdev) && hci_conn_count(hdev) == 1) {
-		cancel_delayed_work(&hdev->power_off);
-		queue_work(hdev->req_workqueue, &hdev->power_off.work);
-	}
-
 	if (!mgmt_connected)
 		return;
 
@@ -9830,14 +9822,6 @@ void mgmt_connect_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
 {
 	struct mgmt_ev_connect_failed ev;
 
-	/* The connection is still in hci_conn_hash so test for 1
-	 * instead of 0 to know if this is the last one.
-	 */
-	if (mgmt_powering_down(hdev) && hci_conn_count(hdev) == 1) {
-		cancel_delayed_work(&hdev->power_off);
-		queue_work(hdev->req_workqueue, &hdev->power_off.work);
-	}
-
 	bacpy(&ev.addr.bdaddr, bdaddr);
 	ev.addr.type = link_to_bdaddr(link_type, addr_type);
 	ev.status = mgmt_status(status);
-- 
2.43.0

[PATCH 6.7 345/713] Bluetooth: Remove superfluous call to hci_conn_check_pending()

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit 78e3639fc8031275010c3287ac548c0bc8de83b1 ]

The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") and
6bd57416127e ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fea5 ("Bluetooth: Cancel Inquiry before
Create Connection").

With commit a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.

This refactoring commit also snuck in two more calls to
hci_conn_check_pending():

- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".

- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.

Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 2a5f5a7d2412b..1f63f77661dce 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3556,8 +3556,6 @@ static void hci_remote_name_evt(struct hci_dev *hdev, void *data,
 
 	bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
 
-	hci_conn_check_pending(hdev);
-
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
-- 
2.43.0

[PATCH 6.7 346/713] Bluetooth: Remove BT_HS

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h   |    1 -
 include/net/bluetooth/l2cap.h |   42 --
 net/bluetooth/Kconfig         |    8 -
 net/bluetooth/Makefile        |    1 -
 net/bluetooth/a2mp.c          | 1054 --------------------------------
 net/bluetooth/a2mp.h          |  154 -----
 net/bluetooth/amp.c           |  590 ------------------
 net/bluetooth/amp.h           |   60 --
 net/bluetooth/hci_conn.c      |    4 -
 net/bluetooth/hci_event.c     |    2 -
 net/bluetooth/l2cap_core.c    | 1069 +--------------------------------
 net/bluetooth/l2cap_sock.c    |   18 +-
 net/bluetooth/mgmt.c          |   73 +--
 13 files changed, 20 insertions(+), 3056 deletions(-)
 delete mode 100644 net/bluetooth/a2mp.c
 delete mode 100644 net/bluetooth/a2mp.h
 delete mode 100644 net/bluetooth/amp.c
 delete mode 100644 net/bluetooth/amp.h

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index f7918c7551834..0d231024570a3 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -393,7 +393,6 @@ enum {
 	HCI_LIMITED_PRIVACY,
 	HCI_RPA_EXPIRED,
 	HCI_RPA_RESOLVING,
-	HCI_HS_ENABLED,
 	HCI_LE_ENABLED,
 	HCI_ADVERTISING,
 	HCI_ADVERTISING_CONNECTABLE,
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index cf393e72d6ed6..92d7197f9a563 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -59,8 +59,6 @@
 #define L2CAP_WAIT_ACK_POLL_PERIOD	msecs_to_jiffies(200)
 #define L2CAP_WAIT_ACK_TIMEOUT		msecs_to_jiffies(10000)
 
-#define L2CAP_A2MP_DEFAULT_MTU		670
-
 /* L2CAP socket address */
 struct sockaddr_l2 {
 	sa_family_t	l2_family;
@@ -109,12 +107,6 @@ struct l2cap_conninfo {
 #define L2CAP_ECHO_RSP		0x09
 #define L2CAP_INFO_REQ		0x0a
 #define L2CAP_INFO_RSP		0x0b
-#define L2CAP_CREATE_CHAN_REQ	0x0c
-#define L2CAP_CREATE_CHAN_RSP	0x0d
-#define L2CAP_MOVE_CHAN_REQ	0x0e
-#define L2CAP_MOVE_CHAN_RSP	0x0f
-#define L2CAP_MOVE_CHAN_CFM	0x10
-#define L2CAP_MOVE_CHAN_CFM_RSP	0x11
 #define L2CAP_CONN_PARAM_UPDATE_REQ	0x12
 #define L2CAP_CONN_PARAM_UPDATE_RSP	0x13
 #define L2CAP_LE_CONN_REQ	0x14
@@ -144,7 +136,6 @@ struct l2cap_conninfo {
 /* L2CAP fixed channels */
 #define L2CAP_FC_SIG_BREDR	0x02
 #define L2CAP_FC_CONNLESS	0x04
-#define L2CAP_FC_A2MP		0x08
 #define L2CAP_FC_ATT		0x10
 #define L2CAP_FC_SIG_LE		0x20
 #define L2CAP_FC_SMP_LE		0x40
@@ -267,7 +258,6 @@ struct l2cap_conn_rsp {
 /* channel identifier */
 #define L2CAP_CID_SIGNALING	0x0001
 #define L2CAP_CID_CONN_LESS	0x0002
-#define L2CAP_CID_A2MP		0x0003
 #define L2CAP_CID_ATT		0x0004
 #define L2CAP_CID_LE_SIGNALING	0x0005
 #define L2CAP_CID_SMP		0x0006
@@ -282,7 +272,6 @@ struct l2cap_conn_rsp {
 #define L2CAP_CR_BAD_PSM	0x0002
 #define L2CAP_CR_SEC_BLOCK	0x0003
 #define L2CAP_CR_NO_MEM		0x0004
-#define L2CAP_CR_BAD_AMP	0x0005
 #define L2CAP_CR_INVALID_SCID	0x0006
 #define L2CAP_CR_SCID_IN_USE	0x0007
 
@@ -404,29 +393,6 @@ struct l2cap_info_rsp {
 	__u8        data[];
 } __packed;
 
-struct l2cap_create_chan_req {
-	__le16      psm;
-	__le16      scid;
-	__u8        amp_id;
-} __packed;
-
-struct l2cap_create_chan_rsp {
-	__le16      dcid;
-	__le16      scid;
-	__le16      result;
-	__le16      status;
-} __packed;
-
-struct l2cap_move_chan_req {
-	__le16      icid;
-	__u8        dest_amp_id;
-} __packed;
-
-struct l2cap_move_chan_rsp {
-	__le16      icid;
-	__le16      result;
-} __packed;
-
 #define L2CAP_MR_SUCCESS	0x0000
 #define L2CAP_MR_PEND		0x0001
 #define L2CAP_MR_BAD_ID		0x0002
@@ -539,8 +505,6 @@ struct l2cap_seq_list {
 
 struct l2cap_chan {
 	struct l2cap_conn	*conn;
-	struct hci_conn		*hs_hcon;
-	struct hci_chan		*hs_hchan;
 	struct kref	kref;
 	atomic_t	nesting;
 
@@ -591,12 +555,6 @@ struct l2cap_chan {
 	unsigned long	conn_state;
 	unsigned long	flags;
 
-	__u8		remote_amp_id;
-	__u8		local_amp_id;
-	__u8		move_id;
-	__u8		move_state;
-	__u8		move_role;
-
 	__u16		next_tx_seq;
 	__u16		expected_ack_seq;
 	__u16		expected_tx_seq;
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index da7cac0a1b716..6b2b65a667008 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -62,14 +62,6 @@ source "net/bluetooth/cmtp/Kconfig"
 
 source "net/bluetooth/hidp/Kconfig"
 
-config BT_HS
-	bool "Bluetooth High Speed (HS) features"
-	depends on BT_BREDR
-	help
-	  Bluetooth High Speed includes support for off-loading
-	  Bluetooth connections via 802.11 (wifi) physical layer
-	  available with Bluetooth version 3.0 or later.
-
 config BT_LE
 	bool "Bluetooth Low Energy (LE) features"
 	depends on BT
diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile
index 141ac1fda0bfa..628d448d78be3 100644
--- a/net/bluetooth/Makefile
+++ b/net/bluetooth/Makefile
@@ -21,7 +21,6 @@ bluetooth-$(CONFIG_DEV_COREDUMP) += coredump.o
 
 bluetooth-$(CONFIG_BT_BREDR) += sco.o
 bluetooth-$(CONFIG_BT_LE) += iso.o
-bluetooth-$(CONFIG_BT_HS) += a2mp.o amp.o
 bluetooth-$(CONFIG_BT_LEDS) += leds.o
 bluetooth-$(CONFIG_BT_MSFTEXT) += msft.o
 bluetooth-$(CONFIG_BT_AOSPEXT) += aosp.o
diff --git a/net/bluetooth/a2mp.c b/net/bluetooth/a2mp.c
deleted file mode 100644
index e7adb8a98cf90..0000000000000
--- a/net/bluetooth/a2mp.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
-   Copyright (c) 2010,2011 Code Aurora Forum.  All rights reserved.
-   Copyright (c) 2011,2012 Intel Corp.
-
-*/
-
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/l2cap.h>
-
-#include "hci_request.h"
-#include "a2mp.h"
-#include "amp.h"
-
-#define A2MP_FEAT_EXT	0x8000
-
-/* Global AMP Manager list */
-static LIST_HEAD(amp_mgr_list);
-static DEFINE_MUTEX(amp_mgr_list_lock);
-
-/* A2MP build & send command helper functions */
-static struct a2mp_cmd *__a2mp_build(u8 code, u8 ident, u16 len, void *data)
-{
-	struct a2mp_cmd *cmd;
-	int plen;
-
-	plen = sizeof(*cmd) + len;
-	cmd = kzalloc(plen, GFP_KERNEL);
-	if (!cmd)
-		return NULL;
-
-	cmd->code = code;
-	cmd->ident = ident;
-	cmd->len = cpu_to_le16(len);
-
-	memcpy(cmd->data, data, len);
-
-	return cmd;
-}
-
-static void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data)
-{
-	struct l2cap_chan *chan = mgr->a2mp_chan;
-	struct a2mp_cmd *cmd;
-	u16 total_len = len + sizeof(*cmd);
-	struct kvec iv;
-	struct msghdr msg;
-
-	cmd = __a2mp_build(code, ident, len, data);
-	if (!cmd)
-		return;
-
-	iv.iov_base = cmd;
-	iv.iov_len = total_len;
-
-	memset(&msg, 0, sizeof(msg));
-
-	iov_iter_kvec(&msg.msg_iter, ITER_SOURCE, &iv, 1, total_len);
-
-	l2cap_chan_send(chan, &msg, total_len);
-
-	kfree(cmd);
-}
-
-static u8 __next_ident(struct amp_mgr *mgr)
-{
-	if (++mgr->ident == 0)
-		mgr->ident = 1;
-
-	return mgr->ident;
-}
-
-static struct amp_mgr *amp_mgr_lookup_by_state(u8 state)
-{
-	struct amp_mgr *mgr;
-
-	mutex_lock(&amp_mgr_list_lock);
-	list_for_each_entry(mgr, &amp_mgr_list, list) {
-		if (test_and_clear_bit(state, &mgr->state)) {
-			amp_mgr_get(mgr);
-			mutex_unlock(&amp_mgr_list_lock);
-			return mgr;
-		}
-	}
-	mutex_unlock(&amp_mgr_list_lock);
-
-	return NULL;
-}
-
-/* hci_dev_list shall be locked */
-static void __a2mp_add_cl(struct amp_mgr *mgr, struct a2mp_cl *cl)
-{
-	struct hci_dev *hdev;
-	int i = 1;
-
-	cl[0].id = AMP_ID_BREDR;
-	cl[0].type = AMP_TYPE_BREDR;
-	cl[0].status = AMP_STATUS_BLUETOOTH_ONLY;
-
-	list_for_each_entry(hdev, &hci_dev_list, list) {
-		if (hdev->dev_type == HCI_AMP) {
-			cl[i].id = hdev->id;
-			cl[i].type = hdev->amp_type;
-			if (test_bit(HCI_UP, &hdev->flags))
-				cl[i].status = hdev->amp_status;
-			else
-				cl[i].status = AMP_STATUS_POWERED_DOWN;
-			i++;
-		}
-	}
-}
-
-/* Processing A2MP messages */
-static int a2mp_command_rej(struct amp_mgr *mgr, struct sk_buff *skb,
-			    struct a2mp_cmd *hdr)
-{
-	struct a2mp_cmd_rej *rej = (void *) skb->data;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*rej))
-		return -EINVAL;
-
-	BT_DBG("ident %u reason %d", hdr->ident, le16_to_cpu(rej->reason));
-
-	skb_pull(skb, sizeof(*rej));
-
-	return 0;
-}
-
-static int a2mp_discover_req(struct amp_mgr *mgr, struct sk_buff *skb,
-			     struct a2mp_cmd *hdr)
-{
-	struct a2mp_discov_req *req = (void *) skb->data;
-	u16 len = le16_to_cpu(hdr->len);
-	struct a2mp_discov_rsp *rsp;
-	u16 ext_feat;
-	u8 num_ctrl;
-	struct hci_dev *hdev;
-
-	if (len < sizeof(*req))
-		return -EINVAL;
-
-	skb_pull(skb, sizeof(*req));
-
-	ext_feat = le16_to_cpu(req->ext_feat);
-
-	BT_DBG("mtu %d efm 0x%4.4x", le16_to_cpu(req->mtu), ext_feat);
-
-	/* check that packet is not broken for now */
-	while (ext_feat & A2MP_FEAT_EXT) {
-		if (len < sizeof(ext_feat))
-			return -EINVAL;
-
-		ext_feat = get_unaligned_le16(skb->data);
-		BT_DBG("efm 0x%4.4x", ext_feat);
-		len -= sizeof(ext_feat);
-		skb_pull(skb, sizeof(ext_feat));
-	}
-
-	read_lock(&hci_dev_list_lock);
-
-	/* at minimum the BR/EDR needs to be listed */
-	num_ctrl = 1;
-
-	list_for_each_entry(hdev, &hci_dev_list, list) {
-		if (hdev->dev_type == HCI_AMP)
-			num_ctrl++;
-	}
-
-	len = struct_size(rsp, cl, num_ctrl);
-	rsp = kmalloc(len, GFP_ATOMIC);
-	if (!rsp) {
-		read_unlock(&hci_dev_list_lock);
-		return -ENOMEM;
-	}
-
-	rsp->mtu = cpu_to_le16(L2CAP_A2MP_DEFAULT_MTU);
-	rsp->ext_feat = 0;
-
-	__a2mp_add_cl(mgr, rsp->cl);
-
-	read_unlock(&hci_dev_list_lock);
-
-	a2mp_send(mgr, A2MP_DISCOVER_RSP, hdr->ident, len, rsp);
-
-	kfree(rsp);
-	return 0;
-}
-
-static int a2mp_discover_rsp(struct amp_mgr *mgr, struct sk_buff *skb,
-			     struct a2mp_cmd *hdr)
-{
-	struct a2mp_discov_rsp *rsp = (void *) skb->data;
-	u16 len = le16_to_cpu(hdr->len);
-	struct a2mp_cl *cl;
-	u16 ext_feat;
-	bool found = false;
-
-	if (len < sizeof(*rsp))
-		return -EINVAL;
-
-	len -= sizeof(*rsp);
-	skb_pull(skb, sizeof(*rsp));
-
-	ext_feat = le16_to_cpu(rsp->ext_feat);
-
-	BT_DBG("mtu %d efm 0x%4.4x", le16_to_cpu(rsp->mtu), ext_feat);
-
-	/* check that packet is not broken for now */
-	while (ext_feat & A2MP_FEAT_EXT) {
-		if (len < sizeof(ext_feat))
-			return -EINVAL;
-
-		ext_feat = get_unaligned_le16(skb->data);
-		BT_DBG("efm 0x%4.4x", ext_feat);
-		len -= sizeof(ext_feat);
-		skb_pull(skb, sizeof(ext_feat));
-	}
-
-	cl = (void *) skb->data;
-	while (len >= sizeof(*cl)) {
-		BT_DBG("Remote AMP id %u type %u status %u", cl->id, cl->type,
-		       cl->status);
-
-		if (cl->id != AMP_ID_BREDR && cl->type != AMP_TYPE_BREDR) {
-			struct a2mp_info_req req;
-
-			found = true;
-
-			memset(&req, 0, sizeof(req));
-
-			req.id = cl->id;
-			a2mp_send(mgr, A2MP_GETINFO_REQ, __next_ident(mgr),
-				  sizeof(req), &req);
-		}
-
-		len -= sizeof(*cl);
-		cl = skb_pull(skb, sizeof(*cl));
-	}
-
-	/* Fall back to L2CAP init sequence */
-	if (!found) {
-		struct l2cap_conn *conn = mgr->l2cap_conn;
-		struct l2cap_chan *chan;
-
-		mutex_lock(&conn->chan_lock);
-
-		list_for_each_entry(chan, &conn->chan_l, list) {
-
-			BT_DBG("chan %p state %s", chan,
-			       state_to_string(chan->state));
-
-			if (chan->scid == L2CAP_CID_A2MP)
-				continue;
-
-			l2cap_chan_lock(chan);
-
-			if (chan->state == BT_CONNECT)
-				l2cap_send_conn_req(chan);
-
-			l2cap_chan_unlock(chan);
-		}
-
-		mutex_unlock(&conn->chan_lock);
-	}
-
-	return 0;
-}
-
-static int a2mp_change_notify(struct amp_mgr *mgr, struct sk_buff *skb,
-			      struct a2mp_cmd *hdr)
-{
-	struct a2mp_cl *cl = (void *) skb->data;
-
-	while (skb->len >= sizeof(*cl)) {
-		BT_DBG("Controller id %u type %u status %u", cl->id, cl->type,
-		       cl->status);
-		cl = skb_pull(skb, sizeof(*cl));
-	}
-
-	/* TODO send A2MP_CHANGE_RSP */
-
-	return 0;
-}
-
-static void read_local_amp_info_complete(struct hci_dev *hdev, u8 status,
-					 u16 opcode)
-{
-	BT_DBG("%s status 0x%2.2x", hdev->name, status);
-
-	a2mp_send_getinfo_rsp(hdev);
-}
-
-static int a2mp_getinfo_req(struct amp_mgr *mgr, struct sk_buff *skb,
-			    struct a2mp_cmd *hdr)
-{
-	struct a2mp_info_req *req  = (void *) skb->data;
-	struct hci_dev *hdev;
-	struct hci_request hreq;
-	int err = 0;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*req))
-		return -EINVAL;
-
-	BT_DBG("id %u", req->id);
-
-	hdev = hci_dev_get(req->id);
-	if (!hdev || hdev->dev_type != HCI_AMP) {
-		struct a2mp_info_rsp rsp;
-
-		memset(&rsp, 0, sizeof(rsp));
-
-		rsp.id = req->id;
-		rsp.status = A2MP_STATUS_INVALID_CTRL_ID;
-
-		a2mp_send(mgr, A2MP_GETINFO_RSP, hdr->ident, sizeof(rsp),
-			  &rsp);
-
-		goto done;
-	}
-
-	set_bit(READ_LOC_AMP_INFO, &mgr->state);
-	hci_req_init(&hreq, hdev);
-	hci_req_add(&hreq, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL);
-	err = hci_req_run(&hreq, read_local_amp_info_complete);
-	if (err < 0)
-		a2mp_send_getinfo_rsp(hdev);
-
-done:
-	if (hdev)
-		hci_dev_put(hdev);
-
-	skb_pull(skb, sizeof(*req));
-	return 0;
-}
-
-static int a2mp_getinfo_rsp(struct amp_mgr *mgr, struct sk_buff *skb,
-			    struct a2mp_cmd *hdr)
-{
-	struct a2mp_info_rsp *rsp = (struct a2mp_info_rsp *) skb->data;
-	struct a2mp_amp_assoc_req req;
-	struct amp_ctrl *ctrl;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*rsp))
-		return -EINVAL;
-
-	BT_DBG("id %u status 0x%2.2x", rsp->id, rsp->status);
-
-	if (rsp->status)
-		return -EINVAL;
-
-	ctrl = amp_ctrl_add(mgr, rsp->id);
-	if (!ctrl)
-		return -ENOMEM;
-
-	memset(&req, 0, sizeof(req));
-
-	req.id = rsp->id;
-	a2mp_send(mgr, A2MP_GETAMPASSOC_REQ, __next_ident(mgr), sizeof(req),
-		  &req);
-
-	skb_pull(skb, sizeof(*rsp));
-	return 0;
-}
-
-static int a2mp_getampassoc_req(struct amp_mgr *mgr, struct sk_buff *skb,
-				struct a2mp_cmd *hdr)
-{
-	struct a2mp_amp_assoc_req *req = (void *) skb->data;
-	struct hci_dev *hdev;
-	struct amp_mgr *tmp;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*req))
-		return -EINVAL;
-
-	BT_DBG("id %u", req->id);
-
-	/* Make sure that other request is not processed */
-	tmp = amp_mgr_lookup_by_state(READ_LOC_AMP_ASSOC);
-
-	hdev = hci_dev_get(req->id);
-	if (!hdev || hdev->amp_type == AMP_TYPE_BREDR || tmp) {
-		struct a2mp_amp_assoc_rsp rsp;
-
-		memset(&rsp, 0, sizeof(rsp));
-		rsp.id = req->id;
-
-		if (tmp) {
-			rsp.status = A2MP_STATUS_COLLISION_OCCURED;
-			amp_mgr_put(tmp);
-		} else {
-			rsp.status = A2MP_STATUS_INVALID_CTRL_ID;
-		}
-
-		a2mp_send(mgr, A2MP_GETAMPASSOC_RSP, hdr->ident, sizeof(rsp),
-			  &rsp);
-
-		goto done;
-	}
-
-	amp_read_loc_assoc(hdev, mgr);
-
-done:
-	if (hdev)
-		hci_dev_put(hdev);
-
-	skb_pull(skb, sizeof(*req));
-	return 0;
-}
-
-static int a2mp_getampassoc_rsp(struct amp_mgr *mgr, struct sk_buff *skb,
-				struct a2mp_cmd *hdr)
-{
-	struct a2mp_amp_assoc_rsp *rsp = (void *) skb->data;
-	u16 len = le16_to_cpu(hdr->len);
-	struct hci_dev *hdev;
-	struct amp_ctrl *ctrl;
-	struct hci_conn *hcon;
-	size_t assoc_len;
-
-	if (len < sizeof(*rsp))
-		return -EINVAL;
-
-	assoc_len = len - sizeof(*rsp);
-
-	BT_DBG("id %u status 0x%2.2x assoc len %zu", rsp->id, rsp->status,
-	       assoc_len);
-
-	if (rsp->status)
-		return -EINVAL;
-
-	/* Save remote ASSOC data */
-	ctrl = amp_ctrl_lookup(mgr, rsp->id);
-	if (ctrl) {
-		u8 *assoc;
-
-		assoc = kmemdup(rsp->amp_assoc, assoc_len, GFP_KERNEL);
-		if (!assoc) {
-			amp_ctrl_put(ctrl);
-			return -ENOMEM;
-		}
-
-		ctrl->assoc = assoc;
-		ctrl->assoc_len = assoc_len;
-		ctrl->assoc_rem_len = assoc_len;
-		ctrl->assoc_len_so_far = 0;
-
-		amp_ctrl_put(ctrl);
-	}
-
-	/* Create Phys Link */
-	hdev = hci_dev_get(rsp->id);
-	if (!hdev)
-		return -EINVAL;
-
-	hcon = phylink_add(hdev, mgr, rsp->id, true);
-	if (!hcon)
-		goto done;
-
-	BT_DBG("Created hcon %p: loc:%u -> rem:%u", hcon, hdev->id, rsp->id);
-
-	mgr->bredr_chan->remote_amp_id = rsp->id;
-
-	amp_create_phylink(hdev, mgr, hcon);
-
-done:
-	hci_dev_put(hdev);
-	skb_pull(skb, len);
-	return 0;
-}
-
-static int a2mp_createphyslink_req(struct amp_mgr *mgr, struct sk_buff *skb,
-				   struct a2mp_cmd *hdr)
-{
-	struct a2mp_physlink_req *req = (void *) skb->data;
-	struct a2mp_physlink_rsp rsp;
-	struct hci_dev *hdev;
-	struct hci_conn *hcon;
-	struct amp_ctrl *ctrl;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*req))
-		return -EINVAL;
-
-	BT_DBG("local_id %u, remote_id %u", req->local_id, req->remote_id);
-
-	memset(&rsp, 0, sizeof(rsp));
-
-	rsp.local_id = req->remote_id;
-	rsp.remote_id = req->local_id;
-
-	hdev = hci_dev_get(req->remote_id);
-	if (!hdev || hdev->amp_type == AMP_TYPE_BREDR) {
-		rsp.status = A2MP_STATUS_INVALID_CTRL_ID;
-		goto send_rsp;
-	}
-
-	ctrl = amp_ctrl_lookup(mgr, rsp.remote_id);
-	if (!ctrl) {
-		ctrl = amp_ctrl_add(mgr, rsp.remote_id);
-		if (ctrl) {
-			amp_ctrl_get(ctrl);
-		} else {
-			rsp.status = A2MP_STATUS_UNABLE_START_LINK_CREATION;
-			goto send_rsp;
-		}
-	}
-
-	if (ctrl) {
-		size_t assoc_len = le16_to_cpu(hdr->len) - sizeof(*req);
-		u8 *assoc;
-
-		assoc = kmemdup(req->amp_assoc, assoc_len, GFP_KERNEL);
-		if (!assoc) {
-			amp_ctrl_put(ctrl);
-			hci_dev_put(hdev);
-			return -ENOMEM;
-		}
-
-		ctrl->assoc = assoc;
-		ctrl->assoc_len = assoc_len;
-		ctrl->assoc_rem_len = assoc_len;
-		ctrl->assoc_len_so_far = 0;
-
-		amp_ctrl_put(ctrl);
-	}
-
-	hcon = phylink_add(hdev, mgr, req->local_id, false);
-	if (hcon) {
-		amp_accept_phylink(hdev, mgr, hcon);
-		rsp.status = A2MP_STATUS_SUCCESS;
-	} else {
-		rsp.status = A2MP_STATUS_UNABLE_START_LINK_CREATION;
-	}
-
-send_rsp:
-	if (hdev)
-		hci_dev_put(hdev);
-
-	/* Reply error now and success after HCI Write Remote AMP Assoc
-	   command complete with success status
-	 */
-	if (rsp.status != A2MP_STATUS_SUCCESS) {
-		a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, hdr->ident,
-			  sizeof(rsp), &rsp);
-	} else {
-		set_bit(WRITE_REMOTE_AMP_ASSOC, &mgr->state);
-		mgr->ident = hdr->ident;
-	}
-
-	skb_pull(skb, le16_to_cpu(hdr->len));
-	return 0;
-}
-
-static int a2mp_discphyslink_req(struct amp_mgr *mgr, struct sk_buff *skb,
-				 struct a2mp_cmd *hdr)
-{
-	struct a2mp_physlink_req *req = (void *) skb->data;
-	struct a2mp_physlink_rsp rsp;
-	struct hci_dev *hdev;
-	struct hci_conn *hcon;
-
-	if (le16_to_cpu(hdr->len) < sizeof(*req))
-		return -EINVAL;
-
-	BT_DBG("local_id %u remote_id %u", req->local_id, req->remote_id);
-
-	memset(&rsp, 0, sizeof(rsp));
-
-	rsp.local_id = req->remote_id;
-	rsp.remote_id = req->local_id;
-	rsp.status = A2MP_STATUS_SUCCESS;
-
-	hdev = hci_dev_get(req->remote_id);
-	if (!hdev) {
-		rsp.status = A2MP_STATUS_INVALID_CTRL_ID;
-		goto send_rsp;
-	}
-
-	hcon = hci_conn_hash_lookup_ba(hdev, AMP_LINK,
-				       &mgr->l2cap_conn->hcon->dst);
-	if (!hcon) {
-		bt_dev_err(hdev, "no phys link exist");
-		rsp.status = A2MP_STATUS_NO_PHYSICAL_LINK_EXISTS;
-		goto clean;
-	}
-
-	/* TODO Disconnect Phys Link here */
-
-clean:
-	hci_dev_put(hdev);
-
-send_rsp:
-	a2mp_send(mgr, A2MP_DISCONNPHYSLINK_RSP, hdr->ident, sizeof(rsp), &rsp);
-
-	skb_pull(skb, sizeof(*req));
-	return 0;
-}
-
-static inline int a2mp_cmd_rsp(struct amp_mgr *mgr, struct sk_buff *skb,
-			       struct a2mp_cmd *hdr)
-{
-	BT_DBG("ident %u code 0x%2.2x", hdr->ident, hdr->code);
-
-	skb_pull(skb, le16_to_cpu(hdr->len));
-	return 0;
-}
-
-/* Handle A2MP signalling */
-static int a2mp_chan_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb)
-{
-	struct a2mp_cmd *hdr;
-	struct amp_mgr *mgr = chan->data;
-	int err = 0;
-
-	amp_mgr_get(mgr);
-
-	while (skb->len >= sizeof(*hdr)) {
-		u16 len;
-
-		hdr = (void *) skb->data;
-		len = le16_to_cpu(hdr->len);
-
-		BT_DBG("code 0x%2.2x id %u len %u", hdr->code, hdr->ident, len);
-
-		skb_pull(skb, sizeof(*hdr));
-
-		if (len > skb->len || !hdr->ident) {
-			err = -EINVAL;
-			break;
-		}
-
-		mgr->ident = hdr->ident;
-
-		switch (hdr->code) {
-		case A2MP_COMMAND_REJ:
-			a2mp_command_rej(mgr, skb, hdr);
-			break;
-
-		case A2MP_DISCOVER_REQ:
-			err = a2mp_discover_req(mgr, skb, hdr);
-			break;
-
-		case A2MP_CHANGE_NOTIFY:
-			err = a2mp_change_notify(mgr, skb, hdr);
-			break;
-
-		case A2MP_GETINFO_REQ:
-			err = a2mp_getinfo_req(mgr, skb, hdr);
-			break;
-
-		case A2MP_GETAMPASSOC_REQ:
-			err = a2mp_getampassoc_req(mgr, skb, hdr);
-			break;
-
-		case A2MP_CREATEPHYSLINK_REQ:
-			err = a2mp_createphyslink_req(mgr, skb, hdr);
-			break;
-
-		case A2MP_DISCONNPHYSLINK_REQ:
-			err = a2mp_discphyslink_req(mgr, skb, hdr);
-			break;
-
-		case A2MP_DISCOVER_RSP:
-			err = a2mp_discover_rsp(mgr, skb, hdr);
-			break;
-
-		case A2MP_GETINFO_RSP:
-			err = a2mp_getinfo_rsp(mgr, skb, hdr);
-			break;
-
-		case A2MP_GETAMPASSOC_RSP:
-			err = a2mp_getampassoc_rsp(mgr, skb, hdr);
-			break;
-
-		case A2MP_CHANGE_RSP:
-		case A2MP_CREATEPHYSLINK_RSP:
-		case A2MP_DISCONNPHYSLINK_RSP:
-			err = a2mp_cmd_rsp(mgr, skb, hdr);
-			break;
-
-		default:
-			BT_ERR("Unknown A2MP sig cmd 0x%2.2x", hdr->code);
-			err = -EINVAL;
-			break;
-		}
-	}
-
-	if (err) {
-		struct a2mp_cmd_rej rej;
-
-		memset(&rej, 0, sizeof(rej));
-
-		rej.reason = cpu_to_le16(0);
-		hdr = (void *) skb->data;
-
-		BT_DBG("Send A2MP Rej: cmd 0x%2.2x err %d", hdr->code, err);
-
-		a2mp_send(mgr, A2MP_COMMAND_REJ, hdr->ident, sizeof(rej),
-			  &rej);
-	}
-
-	/* Always free skb and return success error code to prevent
-	   from sending L2CAP Disconnect over A2MP channel */
-	kfree_skb(skb);
-
-	amp_mgr_put(mgr);
-
-	return 0;
-}
-
-static void a2mp_chan_close_cb(struct l2cap_chan *chan)
-{
-	l2cap_chan_put(chan);
-}
-
-static void a2mp_chan_state_change_cb(struct l2cap_chan *chan, int state,
-				      int err)
-{
-	struct amp_mgr *mgr = chan->data;
-
-	if (!mgr)
-		return;
-
-	BT_DBG("chan %p state %s", chan, state_to_string(state));
-
-	chan->state = state;
-
-	switch (state) {
-	case BT_CLOSED:
-		if (mgr)
-			amp_mgr_put(mgr);
-		break;
-	}
-}
-
-static struct sk_buff *a2mp_chan_alloc_skb_cb(struct l2cap_chan *chan,
-					      unsigned long hdr_len,
-					      unsigned long len, int nb)
-{
-	struct sk_buff *skb;
-
-	skb = bt_skb_alloc(hdr_len + len, GFP_KERNEL);
-	if (!skb)
-		return ERR_PTR(-ENOMEM);
-
-	return skb;
-}
-
-static const struct l2cap_ops a2mp_chan_ops = {
-	.name = "L2CAP A2MP channel",
-	.recv = a2mp_chan_recv_cb,
-	.close = a2mp_chan_close_cb,
-	.state_change = a2mp_chan_state_change_cb,
-	.alloc_skb = a2mp_chan_alloc_skb_cb,
-
-	/* Not implemented for A2MP */
-	.new_connection = l2cap_chan_no_new_connection,
-	.teardown = l2cap_chan_no_teardown,
-	.ready = l2cap_chan_no_ready,
-	.defer = l2cap_chan_no_defer,
-	.resume = l2cap_chan_no_resume,
-	.set_shutdown = l2cap_chan_no_set_shutdown,
-	.get_sndtimeo = l2cap_chan_no_get_sndtimeo,
-};
-
-static struct l2cap_chan *a2mp_chan_open(struct l2cap_conn *conn, bool locked)
-{
-	struct l2cap_chan *chan;
-	int err;
-
-	chan = l2cap_chan_create();
-	if (!chan)
-		return NULL;
-
-	BT_DBG("chan %p", chan);
-
-	chan->chan_type = L2CAP_CHAN_FIXED;
-	chan->scid = L2CAP_CID_A2MP;
-	chan->dcid = L2CAP_CID_A2MP;
-	chan->omtu = L2CAP_A2MP_DEFAULT_MTU;
-	chan->imtu = L2CAP_A2MP_DEFAULT_MTU;
-	chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
-
-	chan->ops = &a2mp_chan_ops;
-
-	l2cap_chan_set_defaults(chan);
-	chan->remote_max_tx = chan->max_tx;
-	chan->remote_tx_win = chan->tx_win;
-
-	chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
-	chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
-
-	skb_queue_head_init(&chan->tx_q);
-
-	chan->mode = L2CAP_MODE_ERTM;
-
-	err = l2cap_ertm_init(chan);
-	if (err < 0) {
-		l2cap_chan_del(chan, 0);
-		return NULL;
-	}
-
-	chan->conf_state = 0;
-
-	if (locked)
-		__l2cap_chan_add(conn, chan);
-	else
-		l2cap_chan_add(conn, chan);
-
-	chan->remote_mps = chan->omtu;
-	chan->mps = chan->omtu;
-
-	chan->state = BT_CONNECTED;
-
-	return chan;
-}
-
-/* AMP Manager functions */
-struct amp_mgr *amp_mgr_get(struct amp_mgr *mgr)
-{
-	BT_DBG("mgr %p orig refcnt %d", mgr, kref_read(&mgr->kref));
-
-	kref_get(&mgr->kref);
-
-	return mgr;
-}
-
-static void amp_mgr_destroy(struct kref *kref)
-{
-	struct amp_mgr *mgr = container_of(kref, struct amp_mgr, kref);
-
-	BT_DBG("mgr %p", mgr);
-
-	mutex_lock(&amp_mgr_list_lock);
-	list_del(&mgr->list);
-	mutex_unlock(&amp_mgr_list_lock);
-
-	amp_ctrl_list_flush(mgr);
-	kfree(mgr);
-}
-
-int amp_mgr_put(struct amp_mgr *mgr)
-{
-	BT_DBG("mgr %p orig refcnt %d", mgr, kref_read(&mgr->kref));
-
-	return kref_put(&mgr->kref, &amp_mgr_destroy);
-}
-
-static struct amp_mgr *amp_mgr_create(struct l2cap_conn *conn, bool locked)
-{
-	struct amp_mgr *mgr;
-	struct l2cap_chan *chan;
-
-	mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
-	if (!mgr)
-		return NULL;
-
-	BT_DBG("conn %p mgr %p", conn, mgr);
-
-	mgr->l2cap_conn = conn;
-
-	chan = a2mp_chan_open(conn, locked);
-	if (!chan) {
-		kfree(mgr);
-		return NULL;
-	}
-
-	mgr->a2mp_chan = chan;
-	chan->data = mgr;
-
-	conn->hcon->amp_mgr = mgr;
-
-	kref_init(&mgr->kref);
-
-	/* Remote AMP ctrl list initialization */
-	INIT_LIST_HEAD(&mgr->amp_ctrls);
-	mutex_init(&mgr->amp_ctrls_lock);
-
-	mutex_lock(&amp_mgr_list_lock);
-	list_add(&mgr->list, &amp_mgr_list);
-	mutex_unlock(&amp_mgr_list_lock);
-
-	return mgr;
-}
-
-struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn,
-				       struct sk_buff *skb)
-{
-	struct amp_mgr *mgr;
-
-	if (conn->hcon->type != ACL_LINK)
-		return NULL;
-
-	mgr = amp_mgr_create(conn, false);
-	if (!mgr) {
-		BT_ERR("Could not create AMP manager");
-		return NULL;
-	}
-
-	BT_DBG("mgr: %p chan %p", mgr, mgr->a2mp_chan);
-
-	return mgr->a2mp_chan;
-}
-
-void a2mp_send_getinfo_rsp(struct hci_dev *hdev)
-{
-	struct amp_mgr *mgr;
-	struct a2mp_info_rsp rsp;
-
-	mgr = amp_mgr_lookup_by_state(READ_LOC_AMP_INFO);
-	if (!mgr)
-		return;
-
-	BT_DBG("%s mgr %p", hdev->name, mgr);
-
-	memset(&rsp, 0, sizeof(rsp));
-
-	rsp.id = hdev->id;
-	rsp.status = A2MP_STATUS_INVALID_CTRL_ID;
-
-	if (hdev->amp_type != AMP_TYPE_BREDR) {
-		rsp.status = 0;
-		rsp.total_bw = cpu_to_le32(hdev->amp_total_bw);
-		rsp.max_bw = cpu_to_le32(hdev->amp_max_bw);
-		rsp.min_latency = cpu_to_le32(hdev->amp_min_latency);
-		rsp.pal_cap = cpu_to_le16(hdev->amp_pal_cap);
-		rsp.assoc_size = cpu_to_le16(hdev->amp_assoc_size);
-	}
-
-	a2mp_send(mgr, A2MP_GETINFO_RSP, mgr->ident, sizeof(rsp), &rsp);
-	amp_mgr_put(mgr);
-}
-
-void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status)
-{
-	struct amp_mgr *mgr;
-	struct amp_assoc *loc_assoc = &hdev->loc_assoc;
-	struct a2mp_amp_assoc_rsp *rsp;
-	size_t len;
-
-	mgr = amp_mgr_lookup_by_state(READ_LOC_AMP_ASSOC);
-	if (!mgr)
-		return;
-
-	BT_DBG("%s mgr %p", hdev->name, mgr);
-
-	len = sizeof(struct a2mp_amp_assoc_rsp) + loc_assoc->len;
-	rsp = kzalloc(len, GFP_KERNEL);
-	if (!rsp) {
-		amp_mgr_put(mgr);
-		return;
-	}
-
-	rsp->id = hdev->id;
-
-	if (status) {
-		rsp->status = A2MP_STATUS_INVALID_CTRL_ID;
-	} else {
-		rsp->status = A2MP_STATUS_SUCCESS;
-		memcpy(rsp->amp_assoc, loc_assoc->data, loc_assoc->len);
-	}
-
-	a2mp_send(mgr, A2MP_GETAMPASSOC_RSP, mgr->ident, len, rsp);
-	amp_mgr_put(mgr);
-	kfree(rsp);
-}
-
-void a2mp_send_create_phy_link_req(struct hci_dev *hdev, u8 status)
-{
-	struct amp_mgr *mgr;
-	struct amp_assoc *loc_assoc = &hdev->loc_assoc;
-	struct a2mp_physlink_req *req;
-	struct l2cap_chan *bredr_chan;
-	size_t len;
-
-	mgr = amp_mgr_lookup_by_state(READ_LOC_AMP_ASSOC_FINAL);
-	if (!mgr)
-		return;
-
-	len = sizeof(*req) + loc_assoc->len;
-
-	BT_DBG("%s mgr %p assoc_len %zu", hdev->name, mgr, len);
-
-	req = kzalloc(len, GFP_KERNEL);
-	if (!req) {
-		amp_mgr_put(mgr);
-		return;
-	}
-
-	bredr_chan = mgr->bredr_chan;
-	if (!bredr_chan)
-		goto clean;
-
-	req->local_id = hdev->id;
-	req->remote_id = bredr_chan->remote_amp_id;
-	memcpy(req->amp_assoc, loc_assoc->data, loc_assoc->len);
-
-	a2mp_send(mgr, A2MP_CREATEPHYSLINK_REQ, __next_ident(mgr), len, req);
-
-clean:
-	amp_mgr_put(mgr);
-	kfree(req);
-}
-
-void a2mp_send_create_phy_link_rsp(struct hci_dev *hdev, u8 status)
-{
-	struct amp_mgr *mgr;
-	struct a2mp_physlink_rsp rsp;
-	struct hci_conn *hs_hcon;
-
-	mgr = amp_mgr_lookup_by_state(WRITE_REMOTE_AMP_ASSOC);
-	if (!mgr)
-		return;
-
-	memset(&rsp, 0, sizeof(rsp));
-
-	hs_hcon = hci_conn_hash_lookup_state(hdev, AMP_LINK, BT_CONNECT);
-	if (!hs_hcon) {
-		rsp.status = A2MP_STATUS_UNABLE_START_LINK_CREATION;
-	} else {
-		rsp.remote_id = hs_hcon->remote_id;
-		rsp.status = A2MP_STATUS_SUCCESS;
-	}
-
-	BT_DBG("%s mgr %p hs_hcon %p status %u", hdev->name, mgr, hs_hcon,
-	       status);
-
-	rsp.local_id = hdev->id;
-	a2mp_send(mgr, A2MP_CREATEPHYSLINK_RSP, mgr->ident, sizeof(rsp), &rsp);
-	amp_mgr_put(mgr);
-}
-
-void a2mp_discover_amp(struct l2cap_chan *chan)
-{
-	struct l2cap_conn *conn = chan->conn;
-	struct amp_mgr *mgr = conn->hcon->amp_mgr;
-	struct a2mp_discov_req req;
-
-	BT_DBG("chan %p conn %p mgr %p", chan, conn, mgr);
-
-	if (!mgr) {
-		mgr = amp_mgr_create(conn, true);
-		if (!mgr)
-			return;
-	}
-
-	mgr->bredr_chan = chan;
-
-	memset(&req, 0, sizeof(req));
-
-	req.mtu = cpu_to_le16(L2CAP_A2MP_DEFAULT_MTU);
-	req.ext_feat = 0;
-	a2mp_send(mgr, A2MP_DISCOVER_REQ, 1, sizeof(req), &req);
-}
diff --git a/net/bluetooth/a2mp.h b/net/bluetooth/a2mp.h
deleted file mode 100644
index 2fd253a61a2a1..0000000000000
--- a/net/bluetooth/a2mp.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
-   Copyright (c) 2010,2011 Code Aurora Forum.  All rights reserved.
-   Copyright (c) 2011,2012 Intel Corp.
-
-*/
-
-#ifndef __A2MP_H
-#define __A2MP_H
-
-#include <net/bluetooth/l2cap.h>
-
-enum amp_mgr_state {
-	READ_LOC_AMP_INFO,
-	READ_LOC_AMP_ASSOC,
-	READ_LOC_AMP_ASSOC_FINAL,
-	WRITE_REMOTE_AMP_ASSOC,
-};
-
-struct amp_mgr {
-	struct list_head	list;
-	struct l2cap_conn	*l2cap_conn;
-	struct l2cap_chan	*a2mp_chan;
-	struct l2cap_chan	*bredr_chan;
-	struct kref		kref;
-	__u8			ident;
-	__u8			handle;
-	unsigned long		state;
-	unsigned long		flags;
-
-	struct list_head	amp_ctrls;
-	struct mutex		amp_ctrls_lock;
-};
-
-struct a2mp_cmd {
-	__u8	code;
-	__u8	ident;
-	__le16	len;
-	__u8	data[];
-} __packed;
-
-/* A2MP command codes */
-#define A2MP_COMMAND_REJ         0x01
-struct a2mp_cmd_rej {
-	__le16	reason;
-	__u8	data[];
-} __packed;
-
-#define A2MP_DISCOVER_REQ        0x02
-struct a2mp_discov_req {
-	__le16	mtu;
-	__le16	ext_feat;
-} __packed;
-
-struct a2mp_cl {
-	__u8	id;
-	__u8	type;
-	__u8	status;
-} __packed;
-
-#define A2MP_DISCOVER_RSP        0x03
-struct a2mp_discov_rsp {
-	__le16     mtu;
-	__le16     ext_feat;
-	struct a2mp_cl cl[];
-} __packed;
-
-#define A2MP_CHANGE_NOTIFY       0x04
-#define A2MP_CHANGE_RSP          0x05
-
-#define A2MP_GETINFO_REQ         0x06
-struct a2mp_info_req {
-	__u8       id;
-} __packed;
-
-#define A2MP_GETINFO_RSP         0x07
-struct a2mp_info_rsp {
-	__u8	id;
-	__u8	status;
-	__le32	total_bw;
-	__le32	max_bw;
-	__le32	min_latency;
-	__le16	pal_cap;
-	__le16	assoc_size;
-} __packed;
-
-#define A2MP_GETAMPASSOC_REQ     0x08
-struct a2mp_amp_assoc_req {
-	__u8	id;
-} __packed;
-
-#define A2MP_GETAMPASSOC_RSP     0x09
-struct a2mp_amp_assoc_rsp {
-	__u8	id;
-	__u8	status;
-	__u8	amp_assoc[];
-} __packed;
-
-#define A2MP_CREATEPHYSLINK_REQ  0x0A
-#define A2MP_DISCONNPHYSLINK_REQ 0x0C
-struct a2mp_physlink_req {
-	__u8	local_id;
-	__u8	remote_id;
-	__u8	amp_assoc[];
-} __packed;
-
-#define A2MP_CREATEPHYSLINK_RSP  0x0B
-#define A2MP_DISCONNPHYSLINK_RSP 0x0D
-struct a2mp_physlink_rsp {
-	__u8	local_id;
-	__u8	remote_id;
-	__u8	status;
-} __packed;
-
-/* A2MP response status */
-#define A2MP_STATUS_SUCCESS			0x00
-#define A2MP_STATUS_INVALID_CTRL_ID		0x01
-#define A2MP_STATUS_UNABLE_START_LINK_CREATION	0x02
-#define A2MP_STATUS_NO_PHYSICAL_LINK_EXISTS	0x02
-#define A2MP_STATUS_COLLISION_OCCURED		0x03
-#define A2MP_STATUS_DISCONN_REQ_RECVD		0x04
-#define A2MP_STATUS_PHYS_LINK_EXISTS		0x05
-#define A2MP_STATUS_SECURITY_VIOLATION		0x06
-
-struct amp_mgr *amp_mgr_get(struct amp_mgr *mgr);
-
-#if IS_ENABLED(CONFIG_BT_HS)
-int amp_mgr_put(struct amp_mgr *mgr);
-struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn,
-				       struct sk_buff *skb);
-void a2mp_discover_amp(struct l2cap_chan *chan);
-#else
-static inline int amp_mgr_put(struct amp_mgr *mgr)
-{
-	return 0;
-}
-
-static inline struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn,
-						     struct sk_buff *skb)
-{
-	return NULL;
-}
-
-static inline void a2mp_discover_amp(struct l2cap_chan *chan)
-{
-}
-#endif
-
-void a2mp_send_getinfo_rsp(struct hci_dev *hdev);
-void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status);
-void a2mp_send_create_phy_link_req(struct hci_dev *hdev, u8 status);
-void a2mp_send_create_phy_link_rsp(struct hci_dev *hdev, u8 status);
-
-#endif /* __A2MP_H */
diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
deleted file mode 100644
index 5d698f19868c5..0000000000000
--- a/net/bluetooth/amp.c
+++ /dev/null
@@ -1,590 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
-   Copyright (c) 2011,2012 Intel Corp.
-
-*/
-
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci.h>
-#include <net/bluetooth/hci_core.h>
-#include <crypto/hash.h>
-
-#include "hci_request.h"
-#include "a2mp.h"
-#include "amp.h"
-
-/* Remote AMP Controllers interface */
-void amp_ctrl_get(struct amp_ctrl *ctrl)
-{
-	BT_DBG("ctrl %p orig refcnt %d", ctrl,
-	       kref_read(&ctrl->kref));
-
-	kref_get(&ctrl->kref);
-}
-
-static void amp_ctrl_destroy(struct kref *kref)
-{
-	struct amp_ctrl *ctrl = container_of(kref, struct amp_ctrl, kref);
-
-	BT_DBG("ctrl %p", ctrl);
-
-	kfree(ctrl->assoc);
-	kfree(ctrl);
-}
-
-int amp_ctrl_put(struct amp_ctrl *ctrl)
-{
-	BT_DBG("ctrl %p orig refcnt %d", ctrl,
-	       kref_read(&ctrl->kref));
-
-	return kref_put(&ctrl->kref, &amp_ctrl_destroy);
-}
-
-struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr, u8 id)
-{
-	struct amp_ctrl *ctrl;
-
-	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
-	if (!ctrl)
-		return NULL;
-
-	kref_init(&ctrl->kref);
-	ctrl->id = id;
-
-	mutex_lock(&mgr->amp_ctrls_lock);
-	list_add(&ctrl->list, &mgr->amp_ctrls);
-	mutex_unlock(&mgr->amp_ctrls_lock);
-
-	BT_DBG("mgr %p ctrl %p", mgr, ctrl);
-
-	return ctrl;
-}
-
-void amp_ctrl_list_flush(struct amp_mgr *mgr)
-{
-	struct amp_ctrl *ctrl, *n;
-
-	BT_DBG("mgr %p", mgr);
-
-	mutex_lock(&mgr->amp_ctrls_lock);
-	list_for_each_entry_safe(ctrl, n, &mgr->amp_ctrls, list) {
-		list_del(&ctrl->list);
-		amp_ctrl_put(ctrl);
-	}
-	mutex_unlock(&mgr->amp_ctrls_lock);
-}
-
-struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id)
-{
-	struct amp_ctrl *ctrl;
-
-	BT_DBG("mgr %p id %u", mgr, id);
-
-	mutex_lock(&mgr->amp_ctrls_lock);
-	list_for_each_entry(ctrl, &mgr->amp_ctrls, list) {
-		if (ctrl->id == id) {
-			amp_ctrl_get(ctrl);
-			mutex_unlock(&mgr->amp_ctrls_lock);
-			return ctrl;
-		}
-	}
-	mutex_unlock(&mgr->amp_ctrls_lock);
-
-	return NULL;
-}
-
-/* Physical Link interface */
-static u8 __next_handle(struct amp_mgr *mgr)
-{
-	if (++mgr->handle == 0)
-		mgr->handle = 1;
-
-	return mgr->handle;
-}
-
-struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr,
-			     u8 remote_id, bool out)
-{
-	bdaddr_t *dst = &mgr->l2cap_conn->hcon->dst;
-	struct hci_conn *hcon;
-	u8 role = out ? HCI_ROLE_MASTER : HCI_ROLE_SLAVE;
-
-	hcon = hci_conn_add(hdev, AMP_LINK, dst, role, __next_handle(mgr));
-	if (!hcon)
-		return NULL;
-
-	BT_DBG("hcon %p dst %pMR", hcon, dst);
-
-	hcon->state = BT_CONNECT;
-	hcon->attempt++;
-	hcon->remote_id = remote_id;
-	hcon->amp_mgr = amp_mgr_get(mgr);
-
-	return hcon;
-}
-
-/* AMP crypto key generation interface */
-static int hmac_sha256(u8 *key, u8 ksize, char *plaintext, u8 psize, u8 *output)
-{
-	struct crypto_shash *tfm;
-	struct shash_desc *shash;
-	int ret;
-
-	if (!ksize)
-		return -EINVAL;
-
-	tfm = crypto_alloc_shash("hmac(sha256)", 0, 0);
-	if (IS_ERR(tfm)) {
-		BT_DBG("crypto_alloc_ahash failed: err %ld", PTR_ERR(tfm));
-		return PTR_ERR(tfm);
-	}
-
-	ret = crypto_shash_setkey(tfm, key, ksize);
-	if (ret) {
-		BT_DBG("crypto_ahash_setkey failed: err %d", ret);
-		goto failed;
-	}
-
-	shash = kzalloc(sizeof(*shash) + crypto_shash_descsize(tfm),
-			GFP_KERNEL);
-	if (!shash) {
-		ret = -ENOMEM;
-		goto failed;
-	}
-
-	shash->tfm = tfm;
-
-	ret = crypto_shash_digest(shash, plaintext, psize, output);
-
-	kfree(shash);
-
-failed:
-	crypto_free_shash(tfm);
-	return ret;
-}
-
-int phylink_gen_key(struct hci_conn *conn, u8 *data, u8 *len, u8 *type)
-{
-	struct hci_dev *hdev = conn->hdev;
-	struct link_key *key;
-	u8 keybuf[HCI_AMP_LINK_KEY_SIZE];
-	u8 gamp_key[HCI_AMP_LINK_KEY_SIZE];
-	int err;
-
-	if (!hci_conn_check_link_mode(conn))
-		return -EACCES;
-
-	BT_DBG("conn %p key_type %d", conn, conn->key_type);
-
-	/* Legacy key */
-	if (conn->key_type < 3) {
-		bt_dev_err(hdev, "legacy key type %u", conn->key_type);
-		return -EACCES;
-	}
-
-	*type = conn->key_type;
-	*len = HCI_AMP_LINK_KEY_SIZE;
-
-	key = hci_find_link_key(hdev, &conn->dst);
-	if (!key) {
-		BT_DBG("No Link key for conn %p dst %pMR", conn, &conn->dst);
-		return -EACCES;
-	}
-
-	/* BR/EDR Link Key concatenated together with itself */
-	memcpy(&keybuf[0], key->val, HCI_LINK_KEY_SIZE);
-	memcpy(&keybuf[HCI_LINK_KEY_SIZE], key->val, HCI_LINK_KEY_SIZE);
-
-	/* Derive Generic AMP Link Key (gamp) */
-	err = hmac_sha256(keybuf, HCI_AMP_LINK_KEY_SIZE, "gamp", 4, gamp_key);
-	if (err) {
-		bt_dev_err(hdev, "could not derive Generic AMP Key: err %d", err);
-		return err;
-	}
-
-	if (conn->key_type == HCI_LK_DEBUG_COMBINATION) {
-		BT_DBG("Use Generic AMP Key (gamp)");
-		memcpy(data, gamp_key, HCI_AMP_LINK_KEY_SIZE);
-		return err;
-	}
-
-	/* Derive Dedicated AMP Link Key: "802b" is 802.11 PAL keyID */
-	return hmac_sha256(gamp_key, HCI_AMP_LINK_KEY_SIZE, "802b", 4, data);
-}
-
-static void read_local_amp_assoc_complete(struct hci_dev *hdev, u8 status,
-					  u16 opcode, struct sk_buff *skb)
-{
-	struct hci_rp_read_local_amp_assoc *rp = (void *)skb->data;
-	struct amp_assoc *assoc = &hdev->loc_assoc;
-	size_t rem_len, frag_len;
-
-	BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
-
-	if (rp->status)
-		goto send_rsp;
-
-	frag_len = skb->len - sizeof(*rp);
-	rem_len = __le16_to_cpu(rp->rem_len);
-
-	if (rem_len > frag_len) {
-		BT_DBG("frag_len %zu rem_len %zu", frag_len, rem_len);
-
-		memcpy(assoc->data + assoc->offset, rp->frag, frag_len);
-		assoc->offset += frag_len;
-
-		/* Read other fragments */
-		amp_read_loc_assoc_frag(hdev, rp->phy_handle);
-
-		return;
-	}
-
-	memcpy(assoc->data + assoc->offset, rp->frag, rem_len);
-	assoc->len = assoc->offset + rem_len;
-	assoc->offset = 0;
-
-send_rsp:
-	/* Send A2MP Rsp when all fragments are received */
-	a2mp_send_getampassoc_rsp(hdev, rp->status);
-	a2mp_send_create_phy_link_req(hdev, rp->status);
-}
-
-void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle)
-{
-	struct hci_cp_read_local_amp_assoc cp;
-	struct amp_assoc *loc_assoc = &hdev->loc_assoc;
-	struct hci_request req;
-	int err;
-
-	BT_DBG("%s handle %u", hdev->name, phy_handle);
-
-	cp.phy_handle = phy_handle;
-	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-	cp.len_so_far = cpu_to_le16(loc_assoc->offset);
-
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp);
-	err = hci_req_run_skb(&req, read_local_amp_assoc_complete);
-	if (err < 0)
-		a2mp_send_getampassoc_rsp(hdev, A2MP_STATUS_INVALID_CTRL_ID);
-}
-
-void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr)
-{
-	struct hci_cp_read_local_amp_assoc cp;
-	struct hci_request req;
-	int err;
-
-	memset(&hdev->loc_assoc, 0, sizeof(struct amp_assoc));
-	memset(&cp, 0, sizeof(cp));
-
-	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-
-	set_bit(READ_LOC_AMP_ASSOC, &mgr->state);
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp);
-	err = hci_req_run_skb(&req, read_local_amp_assoc_complete);
-	if (err < 0)
-		a2mp_send_getampassoc_rsp(hdev, A2MP_STATUS_INVALID_CTRL_ID);
-}
-
-void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
-				   struct hci_conn *hcon)
-{
-	struct hci_cp_read_local_amp_assoc cp;
-	struct amp_mgr *mgr = hcon->amp_mgr;
-	struct hci_request req;
-	int err;
-
-	if (!mgr)
-		return;
-
-	cp.phy_handle = hcon->handle;
-	cp.len_so_far = cpu_to_le16(0);
-	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-
-	set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);
-
-	/* Read Local AMP Assoc final link information data */
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_READ_LOCAL_AMP_ASSOC, sizeof(cp), &cp);
-	err = hci_req_run_skb(&req, read_local_amp_assoc_complete);
-	if (err < 0)
-		a2mp_send_getampassoc_rsp(hdev, A2MP_STATUS_INVALID_CTRL_ID);
-}
-
-static void write_remote_amp_assoc_complete(struct hci_dev *hdev, u8 status,
-					    u16 opcode, struct sk_buff *skb)
-{
-	struct hci_rp_write_remote_amp_assoc *rp = (void *)skb->data;
-
-	BT_DBG("%s status 0x%2.2x phy_handle 0x%2.2x",
-	       hdev->name, rp->status, rp->phy_handle);
-
-	if (rp->status)
-		return;
-
-	amp_write_rem_assoc_continue(hdev, rp->phy_handle);
-}
-
-/* Write AMP Assoc data fragments, returns true with last fragment written*/
-static bool amp_write_rem_assoc_frag(struct hci_dev *hdev,
-				     struct hci_conn *hcon)
-{
-	struct hci_cp_write_remote_amp_assoc *cp;
-	struct amp_mgr *mgr = hcon->amp_mgr;
-	struct amp_ctrl *ctrl;
-	struct hci_request req;
-	u16 frag_len, len;
-
-	ctrl = amp_ctrl_lookup(mgr, hcon->remote_id);
-	if (!ctrl)
-		return false;
-
-	if (!ctrl->assoc_rem_len) {
-		BT_DBG("all fragments are written");
-		ctrl->assoc_rem_len = ctrl->assoc_len;
-		ctrl->assoc_len_so_far = 0;
-
-		amp_ctrl_put(ctrl);
-		return true;
-	}
-
-	frag_len = min_t(u16, 248, ctrl->assoc_rem_len);
-	len = frag_len + sizeof(*cp);
-
-	cp = kzalloc(len, GFP_KERNEL);
-	if (!cp) {
-		amp_ctrl_put(ctrl);
-		return false;
-	}
-
-	BT_DBG("hcon %p ctrl %p frag_len %u assoc_len %u rem_len %u",
-	       hcon, ctrl, frag_len, ctrl->assoc_len, ctrl->assoc_rem_len);
-
-	cp->phy_handle = hcon->handle;
-	cp->len_so_far = cpu_to_le16(ctrl->assoc_len_so_far);
-	cp->rem_len = cpu_to_le16(ctrl->assoc_rem_len);
-	memcpy(cp->frag, ctrl->assoc, frag_len);
-
-	ctrl->assoc_len_so_far += frag_len;
-	ctrl->assoc_rem_len -= frag_len;
-
-	amp_ctrl_put(ctrl);
-
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_WRITE_REMOTE_AMP_ASSOC, len, cp);
-	hci_req_run_skb(&req, write_remote_amp_assoc_complete);
-
-	kfree(cp);
-
-	return false;
-}
-
-void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle)
-{
-	struct hci_conn *hcon;
-
-	BT_DBG("%s phy handle 0x%2.2x", hdev->name, handle);
-
-	hcon = hci_conn_hash_lookup_handle(hdev, handle);
-	if (!hcon)
-		return;
-
-	/* Send A2MP create phylink rsp when all fragments are written */
-	if (amp_write_rem_assoc_frag(hdev, hcon))
-		a2mp_send_create_phy_link_rsp(hdev, 0);
-}
-
-void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle)
-{
-	struct hci_conn *hcon;
-
-	BT_DBG("%s phy handle 0x%2.2x", hdev->name, handle);
-
-	hcon = hci_conn_hash_lookup_handle(hdev, handle);
-	if (!hcon)
-		return;
-
-	BT_DBG("%s phy handle 0x%2.2x hcon %p", hdev->name, handle, hcon);
-
-	amp_write_rem_assoc_frag(hdev, hcon);
-}
-
-static void create_phylink_complete(struct hci_dev *hdev, u8 status,
-				    u16 opcode)
-{
-	struct hci_cp_create_phy_link *cp;
-
-	BT_DBG("%s status 0x%2.2x", hdev->name, status);
-
-	cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_PHY_LINK);
-	if (!cp)
-		return;
-
-	hci_dev_lock(hdev);
-
-	if (status) {
-		struct hci_conn *hcon;
-
-		hcon = hci_conn_hash_lookup_handle(hdev, cp->phy_handle);
-		if (hcon)
-			hci_conn_del(hcon);
-	} else {
-		amp_write_remote_assoc(hdev, cp->phy_handle);
-	}
-
-	hci_dev_unlock(hdev);
-}
-
-void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
-			struct hci_conn *hcon)
-{
-	struct hci_cp_create_phy_link cp;
-	struct hci_request req;
-
-	cp.phy_handle = hcon->handle;
-
-	BT_DBG("%s hcon %p phy handle 0x%2.2x", hdev->name, hcon,
-	       hcon->handle);
-
-	if (phylink_gen_key(mgr->l2cap_conn->hcon, cp.key, &cp.key_len,
-			    &cp.key_type)) {
-		BT_DBG("Cannot create link key");
-		return;
-	}
-
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_CREATE_PHY_LINK, sizeof(cp), &cp);
-	hci_req_run(&req, create_phylink_complete);
-}
-
-static void accept_phylink_complete(struct hci_dev *hdev, u8 status,
-				    u16 opcode)
-{
-	struct hci_cp_accept_phy_link *cp;
-
-	BT_DBG("%s status 0x%2.2x", hdev->name, status);
-
-	if (status)
-		return;
-
-	cp = hci_sent_cmd_data(hdev, HCI_OP_ACCEPT_PHY_LINK);
-	if (!cp)
-		return;
-
-	amp_write_remote_assoc(hdev, cp->phy_handle);
-}
-
-void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
-			struct hci_conn *hcon)
-{
-	struct hci_cp_accept_phy_link cp;
-	struct hci_request req;
-
-	cp.phy_handle = hcon->handle;
-
-	BT_DBG("%s hcon %p phy handle 0x%2.2x", hdev->name, hcon,
-	       hcon->handle);
-
-	if (phylink_gen_key(mgr->l2cap_conn->hcon, cp.key, &cp.key_len,
-			    &cp.key_type)) {
-		BT_DBG("Cannot create link key");
-		return;
-	}
-
-	hci_req_init(&req, hdev);
-	hci_req_add(&req, HCI_OP_ACCEPT_PHY_LINK, sizeof(cp), &cp);
-	hci_req_run(&req, accept_phylink_complete);
-}
-
-void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon)
-{
-	struct hci_dev *bredr_hdev = hci_dev_hold(bredr_hcon->hdev);
-	struct amp_mgr *mgr = hs_hcon->amp_mgr;
-	struct l2cap_chan *bredr_chan;
-
-	BT_DBG("bredr_hcon %p hs_hcon %p mgr %p", bredr_hcon, hs_hcon, mgr);
-
-	if (!bredr_hdev || !mgr || !mgr->bredr_chan)
-		return;
-
-	bredr_chan = mgr->bredr_chan;
-
-	l2cap_chan_lock(bredr_chan);
-
-	set_bit(FLAG_EFS_ENABLE, &bredr_chan->flags);
-	bredr_chan->remote_amp_id = hs_hcon->remote_id;
-	bredr_chan->local_amp_id = hs_hcon->hdev->id;
-	bredr_chan->hs_hcon = hs_hcon;
-	bredr_chan->conn->mtu = hs_hcon->hdev->block_mtu;
-
-	__l2cap_physical_cfm(bredr_chan, 0);
-
-	l2cap_chan_unlock(bredr_chan);
-
-	hci_dev_put(bredr_hdev);
-}
-
-void amp_create_logical_link(struct l2cap_chan *chan)
-{
-	struct hci_conn *hs_hcon = chan->hs_hcon;
-	struct hci_cp_create_accept_logical_link cp;
-	struct hci_dev *hdev;
-
-	BT_DBG("chan %p hs_hcon %p dst %pMR", chan, hs_hcon,
-	       &chan->conn->hcon->dst);
-
-	if (!hs_hcon)
-		return;
-
-	hdev = hci_dev_hold(chan->hs_hcon->hdev);
-	if (!hdev)
-		return;
-
-	cp.phy_handle = hs_hcon->handle;
-
-	cp.tx_flow_spec.id = chan->local_id;
-	cp.tx_flow_spec.stype = chan->local_stype;
-	cp.tx_flow_spec.msdu = cpu_to_le16(chan->local_msdu);
-	cp.tx_flow_spec.sdu_itime = cpu_to_le32(chan->local_sdu_itime);
-	cp.tx_flow_spec.acc_lat = cpu_to_le32(chan->local_acc_lat);
-	cp.tx_flow_spec.flush_to = cpu_to_le32(chan->local_flush_to);
-
-	cp.rx_flow_spec.id = chan->remote_id;
-	cp.rx_flow_spec.stype = chan->remote_stype;
-	cp.rx_flow_spec.msdu = cpu_to_le16(chan->remote_msdu);
-	cp.rx_flow_spec.sdu_itime = cpu_to_le32(chan->remote_sdu_itime);
-	cp.rx_flow_spec.acc_lat = cpu_to_le32(chan->remote_acc_lat);
-	cp.rx_flow_spec.flush_to = cpu_to_le32(chan->remote_flush_to);
-
-	if (hs_hcon->out)
-		hci_send_cmd(hdev, HCI_OP_CREATE_LOGICAL_LINK, sizeof(cp),
-			     &cp);
-	else
-		hci_send_cmd(hdev, HCI_OP_ACCEPT_LOGICAL_LINK, sizeof(cp),
-			     &cp);
-
-	hci_dev_put(hdev);
-}
-
-void amp_disconnect_logical_link(struct hci_chan *hchan)
-{
-	struct hci_conn *hcon = hchan->conn;
-	struct hci_cp_disconn_logical_link cp;
-
-	if (hcon->state != BT_CONNECTED) {
-		BT_DBG("hchan %p not connected", hchan);
-		return;
-	}
-
-	cp.log_handle = cpu_to_le16(hchan->handle);
-	hci_send_cmd(hcon->hdev, HCI_OP_DISCONN_LOGICAL_LINK, sizeof(cp), &cp);
-}
-
-void amp_destroy_logical_link(struct hci_chan *hchan, u8 reason)
-{
-	BT_DBG("hchan %p", hchan);
-
-	hci_chan_del(hchan);
-}
diff --git a/net/bluetooth/amp.h b/net/bluetooth/amp.h
deleted file mode 100644
index 97c87abd129f6..0000000000000
--- a/net/bluetooth/amp.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
-   Copyright (c) 2011,2012 Intel Corp.
-
-*/
-
-#ifndef __AMP_H
-#define __AMP_H
-
-struct amp_ctrl {
-	struct list_head	list;
-	struct kref		kref;
-	__u8			id;
-	__u16			assoc_len_so_far;
-	__u16			assoc_rem_len;
-	__u16			assoc_len;
-	__u8			*assoc;
-};
-
-int amp_ctrl_put(struct amp_ctrl *ctrl);
-void amp_ctrl_get(struct amp_ctrl *ctrl);
-struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr, u8 id);
-struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id);
-void amp_ctrl_list_flush(struct amp_mgr *mgr);
-
-struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr,
-			     u8 remote_id, bool out);
-
-int phylink_gen_key(struct hci_conn *hcon, u8 *data, u8 *len, u8 *type);
-
-void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle);
-void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr);
-void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
-				   struct hci_conn *hcon);
-void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
-			struct hci_conn *hcon);
-void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr,
-			struct hci_conn *hcon);
-
-#if IS_ENABLED(CONFIG_BT_HS)
-void amp_create_logical_link(struct l2cap_chan *chan);
-void amp_disconnect_logical_link(struct hci_chan *hchan);
-#else
-static inline void amp_create_logical_link(struct l2cap_chan *chan)
-{
-}
-
-static inline void amp_disconnect_logical_link(struct hci_chan *hchan)
-{
-}
-#endif
-
-void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle);
-void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle);
-void amp_physical_cfm(struct hci_conn *bredr_hcon, struct hci_conn *hs_hcon);
-void amp_create_logical_link(struct l2cap_chan *chan);
-void amp_disconnect_logical_link(struct hci_chan *hchan);
-void amp_destroy_logical_link(struct hci_chan *hchan, u8 reason);
-
-#endif /* __AMP_H */
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index d01db89fcb469..029bf74ec5e78 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -36,7 +36,6 @@
 
 #include "hci_request.h"
 #include "smp.h"
-#include "a2mp.h"
 #include "eir.h"
 
 struct sco_param {
@@ -1169,9 +1168,6 @@ void hci_conn_del(struct hci_conn *conn)
 		}
 	}
 
-	if (conn->amp_mgr)
-		amp_mgr_put(conn->amp_mgr);
-
 	skb_queue_purge(&conn->data_q);
 
 	/* Remove the connection from the list and cleanup its remaining
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 1f63f77661dce..55daada8dc15d 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -36,8 +36,6 @@
 #include "hci_request.h"
 #include "hci_debugfs.h"
 #include "hci_codec.h"
-#include "a2mp.h"
-#include "amp.h"
 #include "smp.h"
 #include "msft.h"
 #include "eir.h"
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 656f49b299d20..ab5a9d42fae71 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -39,8 +39,6 @@
 #include <net/bluetooth/l2cap.h>
 
 #include "smp.h"
-#include "a2mp.h"
-#include "amp.h"
 
 #define LE_FLOWCTL_MAX_CREDITS 65535
 
@@ -167,24 +165,6 @@ static struct l2cap_chan *__l2cap_get_chan_by_ident(struct l2cap_conn *conn,
 	return NULL;
 }
 
-static struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn,
-						  u8 ident)
-{
-	struct l2cap_chan *c;
-
-	mutex_lock(&conn->chan_lock);
-	c = __l2cap_get_chan_by_ident(conn, ident);
-	if (c) {
-		/* Only lock if chan reference is not 0 */
-		c = l2cap_chan_hold_unless_zero(c);
-		if (c)
-			l2cap_chan_lock(c);
-	}
-	mutex_unlock(&conn->chan_lock);
-
-	return c;
-}
-
 static struct l2cap_chan *__l2cap_global_chan_by_addr(__le16 psm, bdaddr_t *src,
 						      u8 src_type)
 {
@@ -651,7 +631,6 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
 	chan->ops->teardown(chan, err);
 
 	if (conn) {
-		struct amp_mgr *mgr = conn->hcon->amp_mgr;
 		/* Delete from channel list */
 		list_del(&chan->list);
 
@@ -666,16 +645,6 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
 		if (chan->chan_type != L2CAP_CHAN_FIXED ||
 		    test_bit(FLAG_HOLD_HCI_CONN, &chan->flags))
 			hci_conn_drop(conn->hcon);
-
-		if (mgr && mgr->bredr_chan == chan)
-			mgr->bredr_chan = NULL;
-	}
-
-	if (chan->hs_hchan) {
-		struct hci_chan *hs_hchan = chan->hs_hchan;
-
-		BT_DBG("chan %p disconnect hs_hchan %p", chan, hs_hchan);
-		amp_disconnect_logical_link(hs_hchan);
 	}
 
 	if (test_bit(CONF_NOT_COMPLETE, &chan->conf_state))
@@ -977,12 +946,6 @@ static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
 	hci_send_acl(conn->hchan, skb, flags);
 }
 
-static bool __chan_is_moving(struct l2cap_chan *chan)
-{
-	return chan->move_state != L2CAP_MOVE_STABLE &&
-	       chan->move_state != L2CAP_MOVE_WAIT_PREPARE;
-}
-
 static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
 {
 	struct hci_conn *hcon = chan->conn->hcon;
@@ -991,15 +954,6 @@ static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
 	BT_DBG("chan %p, skb %p len %d priority %u", chan, skb, skb->len,
 	       skb->priority);
 
-	if (chan->hs_hcon && !__chan_is_moving(chan)) {
-		if (chan->hs_hchan)
-			hci_send_acl(chan->hs_hchan, skb, ACL_COMPLETE);
-		else
-			kfree_skb(skb);
-
-		return;
-	}
-
 	/* Use NO_FLUSH for LE links (where this is the only option) or
 	 * if the BR/EDR link supports it and flushing has not been
 	 * explicitly requested (through FLAG_FLUSHABLE).
@@ -1180,9 +1134,6 @@ static void l2cap_send_sframe(struct l2cap_chan *chan,
 	if (!control->sframe)
 		return;
 
-	if (__chan_is_moving(chan))
-		return;
-
 	if (test_and_clear_bit(CONN_SEND_FBIT, &chan->conn_state) &&
 	    !control->poll)
 		control->final = 1;
@@ -1237,40 +1188,6 @@ static inline int __l2cap_no_conn_pending(struct l2cap_chan *chan)
 	return !test_bit(CONF_CONNECT_PEND, &chan->conf_state);
 }
 
-static bool __amp_capable(struct l2cap_chan *chan)
-{
-	struct l2cap_conn *conn = chan->conn;
-	struct hci_dev *hdev;
-	bool amp_available = false;
-
-	if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
-		return false;
-
-	if (!(conn->remote_fixed_chan & L2CAP_FC_A2MP))
-		return false;
-
-	read_lock(&hci_dev_list_lock);
-	list_for_each_entry(hdev, &hci_dev_list, list) {
-		if (hdev->amp_type != AMP_TYPE_BREDR &&
-		    test_bit(HCI_UP, &hdev->flags)) {
-			amp_available = true;
-			break;
-		}
-	}
-	read_unlock(&hci_dev_list_lock);
-
-	if (chan->chan_policy == BT_CHANNEL_POLICY_AMP_PREFERRED)
-		return amp_available;
-
-	return false;
-}
-
-static bool l2cap_check_efs(struct l2cap_chan *chan)
-{
-	/* Check EFS parameters */
-	return true;
-}
-
 void l2cap_send_conn_req(struct l2cap_chan *chan)
 {
 	struct l2cap_conn *conn = chan->conn;
@@ -1286,76 +1203,6 @@ void l2cap_send_conn_req(struct l2cap_chan *chan)
 	l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
 }
 
-static void l2cap_send_create_chan_req(struct l2cap_chan *chan, u8 amp_id)
-{
-	struct l2cap_create_chan_req req;
-	req.scid = cpu_to_le16(chan->scid);
-	req.psm  = chan->psm;
-	req.amp_id = amp_id;
-
-	chan->ident = l2cap_get_ident(chan->conn);
-
-	l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_REQ,
-		       sizeof(req), &req);
-}
-
-static void l2cap_move_setup(struct l2cap_chan *chan)
-{
-	struct sk_buff *skb;
-
-	BT_DBG("chan %p", chan);
-
-	if (chan->mode != L2CAP_MODE_ERTM)
-		return;
-
-	__clear_retrans_timer(chan);
-	__clear_monitor_timer(chan);
-	__clear_ack_timer(chan);
-
-	chan->retry_count = 0;
-	skb_queue_walk(&chan->tx_q, skb) {
-		if (bt_cb(skb)->l2cap.retries)
-			bt_cb(skb)->l2cap.retries = 1;
-		else
-			break;
-	}
-
-	chan->expected_tx_seq = chan->buffer_seq;
-
-	clear_bit(CONN_REJ_ACT, &chan->conn_state);
-	clear_bit(CONN_SREJ_ACT, &chan->conn_state);
-	l2cap_seq_list_clear(&chan->retrans_list);
-	l2cap_seq_list_clear(&chan->srej_list);
-	skb_queue_purge(&chan->srej_q);
-
-	chan->tx_state = L2CAP_TX_STATE_XMIT;
-	chan->rx_state = L2CAP_RX_STATE_MOVE;
-
-	set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
-}
-
-static void l2cap_move_done(struct l2cap_chan *chan)
-{
-	u8 move_role = chan->move_role;
-	BT_DBG("chan %p", chan);
-
-	chan->move_state = L2CAP_MOVE_STABLE;
-	chan->move_role = L2CAP_MOVE_ROLE_NONE;
-
-	if (chan->mode != L2CAP_MODE_ERTM)
-		return;
-
-	switch (move_role) {
-	case L2CAP_MOVE_ROLE_INITIATOR:
-		l2cap_tx(chan, NULL, NULL, L2CAP_EV_EXPLICIT_POLL);
-		chan->rx_state = L2CAP_RX_STATE_WAIT_F;
-		break;
-	case L2CAP_MOVE_ROLE_RESPONDER:
-		chan->rx_state = L2CAP_RX_STATE_WAIT_P;
-		break;
-	}
-}
-
 static void l2cap_chan_ready(struct l2cap_chan *chan)
 {
 	/* The channel may have already been flagged as connected in
@@ -1505,10 +1352,7 @@ static void l2cap_le_start(struct l2cap_chan *chan)
 
 static void l2cap_start_connection(struct l2cap_chan *chan)
 {
-	if (__amp_capable(chan)) {
-		BT_DBG("chan %p AMP capable: discover AMPs", chan);
-		a2mp_discover_amp(chan);
-	} else if (chan->conn->hcon->type == LE_LINK) {
+	if (chan->conn->hcon->type == LE_LINK) {
 		l2cap_le_start(chan);
 	} else {
 		l2cap_send_conn_req(chan);
@@ -1611,11 +1455,6 @@ static void l2cap_send_disconn_req(struct l2cap_chan *chan, int err)
 		__clear_ack_timer(chan);
 	}
 
-	if (chan->scid == L2CAP_CID_A2MP) {
-		l2cap_state_change(chan, BT_DISCONN);
-		return;
-	}
-
 	req.dcid = cpu_to_le16(chan->dcid);
 	req.scid = cpu_to_le16(chan->scid);
 	l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_DISCONN_REQ,
@@ -1754,11 +1593,6 @@ static void l2cap_conn_ready(struct l2cap_conn *conn)
 
 		l2cap_chan_lock(chan);
 
-		if (chan->scid == L2CAP_CID_A2MP) {
-			l2cap_chan_unlock(chan);
-			continue;
-		}
-
 		if (hcon->type == LE_LINK) {
 			l2cap_le_start(chan);
 		} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
@@ -2067,9 +1901,6 @@ static void l2cap_streaming_send(struct l2cap_chan *chan,
 
 	BT_DBG("chan %p, skbs %p", chan, skbs);
 
-	if (__chan_is_moving(chan))
-		return;
-
 	skb_queue_splice_tail_init(skbs, &chan->tx_q);
 
 	while (!skb_queue_empty(&chan->tx_q)) {
@@ -2112,9 +1943,6 @@ static int l2cap_ertm_send(struct l2cap_chan *chan)
 	if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
 		return 0;
 
-	if (__chan_is_moving(chan))
-		return 0;
-
 	while (chan->tx_send_head &&
 	       chan->unacked_frames < chan->remote_tx_win &&
 	       chan->tx_state == L2CAP_TX_STATE_XMIT) {
@@ -2180,9 +2008,6 @@ static void l2cap_ertm_resend(struct l2cap_chan *chan)
 	if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
 		return;
 
-	if (__chan_is_moving(chan))
-		return;
-
 	while (chan->retrans_list.head != L2CAP_SEQ_LIST_CLEAR) {
 		seq = l2cap_seq_list_pop(&chan->retrans_list);
 
@@ -2522,8 +2347,7 @@ static int l2cap_segment_sdu(struct l2cap_chan *chan,
 	pdu_len = chan->conn->mtu;
 
 	/* Constrain PDU size for BR/EDR connections */
-	if (!chan->hs_hcon)
-		pdu_len = min_t(size_t, pdu_len, L2CAP_BREDR_MAX_PAYLOAD);
+	pdu_len = min_t(size_t, pdu_len, L2CAP_BREDR_MAX_PAYLOAD);
 
 	/* Adjust for largest possible L2CAP overhead. */
 	if (chan->fcs)
@@ -3287,11 +3111,6 @@ int l2cap_ertm_init(struct l2cap_chan *chan)
 
 	skb_queue_head_init(&chan->tx_q);
 
-	chan->local_amp_id = AMP_ID_BREDR;
-	chan->move_id = AMP_ID_BREDR;
-	chan->move_state = L2CAP_MOVE_STABLE;
-	chan->move_role = L2CAP_MOVE_ROLE_NONE;
-
 	if (chan->mode != L2CAP_MODE_ERTM)
 		return 0;
 
@@ -3326,52 +3145,19 @@ static inline __u8 l2cap_select_mode(__u8 mode, __u16 remote_feat_mask)
 
 static inline bool __l2cap_ews_supported(struct l2cap_conn *conn)
 {
-	return ((conn->local_fixed_chan & L2CAP_FC_A2MP) &&
-		(conn->feat_mask & L2CAP_FEAT_EXT_WINDOW));
+	return (conn->feat_mask & L2CAP_FEAT_EXT_WINDOW);
 }
 
 static inline bool __l2cap_efs_supported(struct l2cap_conn *conn)
 {
-	return ((conn->local_fixed_chan & L2CAP_FC_A2MP) &&
-		(conn->feat_mask & L2CAP_FEAT_EXT_FLOW));
+	return (conn->feat_mask & L2CAP_FEAT_EXT_FLOW);
 }
 
 static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,
 				      struct l2cap_conf_rfc *rfc)
 {
-	if (chan->local_amp_id != AMP_ID_BREDR && chan->hs_hcon) {
-		u64 ertm_to = chan->hs_hcon->hdev->amp_be_flush_to;
-
-		/* Class 1 devices have must have ERTM timeouts
-		 * exceeding the Link Supervision Timeout.  The
-		 * default Link Supervision Timeout for AMP
-		 * controllers is 10 seconds.
-		 *
-		 * Class 1 devices use 0xffffffff for their
-		 * best-effort flush timeout, so the clamping logic
-		 * will result in a timeout that meets the above
-		 * requirement.  ERTM timeouts are 16-bit values, so
-		 * the maximum timeout is 65.535 seconds.
-		 */
-
-		/* Convert timeout to milliseconds and round */
-		ertm_to = DIV_ROUND_UP_ULL(ertm_to, 1000);
-
-		/* This is the recommended formula for class 2 devices
-		 * that start ERTM timers when packets are sent to the
-		 * controller.
-		 */
-		ertm_to = 3 * ertm_to + 500;
-
-		if (ertm_to > 0xffff)
-			ertm_to = 0xffff;
-
-		rfc->retrans_timeout = cpu_to_le16((u16) ertm_to);
-		rfc->monitor_timeout = rfc->retrans_timeout;
-	} else {
-		rfc->retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
-		rfc->monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
-	}
+	rfc->retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
+	rfc->monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
 }
 
 static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
@@ -3623,13 +3409,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
 		case L2CAP_CONF_EWS:
 			if (olen != 2)
 				break;
-			if (!(chan->conn->local_fixed_chan & L2CAP_FC_A2MP))
-				return -ECONNREFUSED;
-			set_bit(FLAG_EXT_CTRL, &chan->flags);
-			set_bit(CONF_EWS_RECV, &chan->conf_state);
-			chan->tx_win_max = L2CAP_DEFAULT_EXT_WINDOW;
-			chan->remote_tx_win = val;
-			break;
+			return -ECONNREFUSED;
 
 		default:
 			if (hint)
@@ -4027,11 +3807,7 @@ void __l2cap_connect_rsp_defer(struct l2cap_chan *chan)
 	rsp.dcid   = cpu_to_le16(chan->scid);
 	rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
 	rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
-
-	if (chan->hs_hcon)
-		rsp_code = L2CAP_CREATE_CHAN_RSP;
-	else
-		rsp_code = L2CAP_CONN_RSP;
+	rsp_code = L2CAP_CONN_RSP;
 
 	BT_DBG("chan %p rsp_code %u", chan, rsp_code);
 
@@ -4190,7 +3966,6 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
 	chan->dst_type = bdaddr_dst_type(conn->hcon);
 	chan->psm  = psm;
 	chan->dcid = scid;
-	chan->local_amp_id = amp_id;
 
 	__l2cap_chan_add(conn, chan);
 
@@ -4516,10 +4291,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 		/* check compatibility */
 
 		/* Send rsp for BR/EDR channel */
-		if (!chan->hs_hcon)
-			l2cap_send_efs_conf_rsp(chan, rsp, cmd->ident, flags);
-		else
-			chan->ident = cmd->ident;
+		l2cap_send_efs_conf_rsp(chan, rsp, cmd->ident, flags);
 	}
 
 unlock:
@@ -4571,15 +4343,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn,
 				goto done;
 			}
 
-			if (!chan->hs_hcon) {
-				l2cap_send_efs_conf_rsp(chan, buf, cmd->ident,
-							0);
-			} else {
-				if (l2cap_check_efs(chan)) {
-					amp_create_logical_link(chan);
-					chan->ident = cmd->ident;
-				}
-			}
+			l2cap_send_efs_conf_rsp(chan, buf, cmd->ident, 0);
 		}
 		goto done;
 
@@ -4750,9 +4514,6 @@ static inline int l2cap_information_req(struct l2cap_conn *conn,
 		if (!disable_ertm)
 			feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING
 				| L2CAP_FEAT_FCS;
-		if (conn->local_fixed_chan & L2CAP_FC_A2MP)
-			feat_mask |= L2CAP_FEAT_EXT_FLOW
-				| L2CAP_FEAT_EXT_WINDOW;
 
 		put_unaligned_le32(feat_mask, rsp->data);
 		l2cap_send_cmd(conn, cmd->ident, L2CAP_INFO_RSP, sizeof(buf),
@@ -4841,751 +4602,6 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn,
 	return 0;
 }
 
-static int l2cap_create_channel_req(struct l2cap_conn *conn,
-				    struct l2cap_cmd_hdr *cmd,
-				    u16 cmd_len, void *data)
-{
-	struct l2cap_create_chan_req *req = data;
-	struct l2cap_create_chan_rsp rsp;
-	struct l2cap_chan *chan;
-	struct hci_dev *hdev;
-	u16 psm, scid;
-
-	if (cmd_len != sizeof(*req))
-		return -EPROTO;
-
-	if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
-		return -EINVAL;
-
-	psm = le16_to_cpu(req->psm);
-	scid = le16_to_cpu(req->scid);
-
-	BT_DBG("psm 0x%2.2x, scid 0x%4.4x, amp_id %d", psm, scid, req->amp_id);
-
-	/* For controller id 0 make BR/EDR connection */
-	if (req->amp_id == AMP_ID_BREDR) {
-		l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
-			      req->amp_id);
-		return 0;
-	}
-
-	/* Validate AMP controller id */
-	hdev = hci_dev_get(req->amp_id);
-	if (!hdev)
-		goto error;
-
-	if (hdev->dev_type != HCI_AMP || !test_bit(HCI_UP, &hdev->flags)) {
-		hci_dev_put(hdev);
-		goto error;
-	}
-
-	chan = l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
-			     req->amp_id);
-	if (chan) {
-		struct amp_mgr *mgr = conn->hcon->amp_mgr;
-		struct hci_conn *hs_hcon;
-
-		hs_hcon = hci_conn_hash_lookup_ba(hdev, AMP_LINK,
-						  &conn->hcon->dst);
-		if (!hs_hcon) {
-			hci_dev_put(hdev);
-			cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
-					       chan->dcid);
-			return 0;
-		}
-
-		BT_DBG("mgr %p bredr_chan %p hs_hcon %p", mgr, chan, hs_hcon);
-
-		mgr->bredr_chan = chan;
-		chan->hs_hcon = hs_hcon;
-		chan->fcs = L2CAP_FCS_NONE;
-		conn->mtu = hdev->block_mtu;
-	}
-
-	hci_dev_put(hdev);
-
-	return 0;
-
-error:
-	rsp.dcid = 0;
-	rsp.scid = cpu_to_le16(scid);
-	rsp.result = cpu_to_le16(L2CAP_CR_BAD_AMP);
-	rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
-
-	l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP,
-		       sizeof(rsp), &rsp);
-
-	return 0;
-}
-
-static void l2cap_send_move_chan_req(struct l2cap_chan *chan, u8 dest_amp_id)
-{
-	struct l2cap_move_chan_req req;
-	u8 ident;
-
-	BT_DBG("chan %p, dest_amp_id %d", chan, dest_amp_id);
-
-	ident = l2cap_get_ident(chan->conn);
-	chan->ident = ident;
-
-	req.icid = cpu_to_le16(chan->scid);
-	req.dest_amp_id = dest_amp_id;
-
-	l2cap_send_cmd(chan->conn, ident, L2CAP_MOVE_CHAN_REQ, sizeof(req),
-		       &req);
-
-	__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
-}
-
-static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
-{
-	struct l2cap_move_chan_rsp rsp;
-
-	BT_DBG("chan %p, result 0x%4.4x", chan, result);
-
-	rsp.icid = cpu_to_le16(chan->dcid);
-	rsp.result = cpu_to_le16(result);
-
-	l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
-		       sizeof(rsp), &rsp);
-}
-
-static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
-{
-	struct l2cap_move_chan_cfm cfm;
-
-	BT_DBG("chan %p, result 0x%4.4x", chan, result);
-
-	chan->ident = l2cap_get_ident(chan->conn);
-
-	cfm.icid = cpu_to_le16(chan->scid);
-	cfm.result = cpu_to_le16(result);
-
-	l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_CFM,
-		       sizeof(cfm), &cfm);
-
-	__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
-}
-
-static void l2cap_send_move_chan_cfm_icid(struct l2cap_conn *conn, u16 icid)
-{
-	struct l2cap_move_chan_cfm cfm;
-
-	BT_DBG("conn %p, icid 0x%4.4x", conn, icid);
-
-	cfm.icid = cpu_to_le16(icid);
-	cfm.result = cpu_to_le16(L2CAP_MC_UNCONFIRMED);
-
-	l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_MOVE_CHAN_CFM,
-		       sizeof(cfm), &cfm);
-}
-
-static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
-					 u16 icid)
-{
-	struct l2cap_move_chan_cfm_rsp rsp;
-
-	BT_DBG("icid 0x%4.4x", icid);
-
-	rsp.icid = cpu_to_le16(icid);
-	l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
-}
-
-static void __release_logical_link(struct l2cap_chan *chan)
-{
-	chan->hs_hchan = NULL;
-	chan->hs_hcon = NULL;
-
-	/* Placeholder - release the logical link */
-}
-
-static void l2cap_logical_fail(struct l2cap_chan *chan)
-{
-	/* Logical link setup failed */
-	if (chan->state != BT_CONNECTED) {
-		/* Create channel failure, disconnect */
-		l2cap_send_disconn_req(chan, ECONNRESET);
-		return;
-	}
-
-	switch (chan->move_role) {
-	case L2CAP_MOVE_ROLE_RESPONDER:
-		l2cap_move_done(chan);
-		l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
-		break;
-	case L2CAP_MOVE_ROLE_INITIATOR:
-		if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
-		    chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
-			/* Remote has only sent pending or
-			 * success responses, clean up
-			 */
-			l2cap_move_done(chan);
-		}
-
-		/* Other amp move states imply that the move
-		 * has already aborted
-		 */
-		l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
-		break;
-	}
-}
-
-static void l2cap_logical_finish_create(struct l2cap_chan *chan,
-					struct hci_chan *hchan)
-{
-	struct l2cap_conf_rsp rsp;
-
-	chan->hs_hchan = hchan;
-	chan->hs_hcon->l2cap_data = chan->conn;
-
-	l2cap_send_efs_conf_rsp(chan, &rsp, chan->ident, 0);
-
-	if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
-		int err;
-
-		set_default_fcs(chan);
-
-		err = l2cap_ertm_init(chan);
-		if (err < 0)
-			l2cap_send_disconn_req(chan, -err);
-		else
-			l2cap_chan_ready(chan);
-	}
-}
-
-static void l2cap_logical_finish_move(struct l2cap_chan *chan,
-				      struct hci_chan *hchan)
-{
-	chan->hs_hcon = hchan->conn;
-	chan->hs_hcon->l2cap_data = chan->conn;
-
-	BT_DBG("move_state %d", chan->move_state);
-
-	switch (chan->move_state) {
-	case L2CAP_MOVE_WAIT_LOGICAL_COMP:
-		/* Move confirm will be sent after a success
-		 * response is received
-		 */
-		chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
-		break;
-	case L2CAP_MOVE_WAIT_LOGICAL_CFM:
-		if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
-			chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
-		} else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
-			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
-			l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
-		} else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
-			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
-			l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
-		}
-		break;
-	default:
-		/* Move was not in expected state, free the channel */
-		__release_logical_link(chan);
-
-		chan->move_state = L2CAP_MOVE_STABLE;
-	}
-}
-
-/* Call with chan locked */
-void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
-		       u8 status)
-{
-	BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
-
-	if (status) {
-		l2cap_logical_fail(chan);
-		__release_logical_link(chan);
-		return;
-	}
-
-	if (chan->state != BT_CONNECTED) {
-		/* Ignore logical link if channel is on BR/EDR */
-		if (chan->local_amp_id != AMP_ID_BREDR)
-			l2cap_logical_finish_create(chan, hchan);
-	} else {
-		l2cap_logical_finish_move(chan, hchan);
-	}
-}
-
-void l2cap_move_start(struct l2cap_chan *chan)
-{
-	BT_DBG("chan %p", chan);
-
-	if (chan->local_amp_id == AMP_ID_BREDR) {
-		if (chan->chan_policy != BT_CHANNEL_POLICY_AMP_PREFERRED)
-			return;
-		chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
-		chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
-		/* Placeholder - start physical link setup */
-	} else {
-		chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
-		chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
-		chan->move_id = 0;
-		l2cap_move_setup(chan);
-		l2cap_send_move_chan_req(chan, 0);
-	}
-}
-
-static void l2cap_do_create(struct l2cap_chan *chan, int result,
-			    u8 local_amp_id, u8 remote_amp_id)
-{
-	BT_DBG("chan %p state %s %u -> %u", chan, state_to_string(chan->state),
-	       local_amp_id, remote_amp_id);
-
-	chan->fcs = L2CAP_FCS_NONE;
-
-	/* Outgoing channel on AMP */
-	if (chan->state == BT_CONNECT) {
-		if (result == L2CAP_CR_SUCCESS) {
-			chan->local_amp_id = local_amp_id;
-			l2cap_send_create_chan_req(chan, remote_amp_id);
-		} else {
-			/* Revert to BR/EDR connect */
-			l2cap_send_conn_req(chan);
-		}
-
-		return;
-	}
-
-	/* Incoming channel on AMP */
-	if (__l2cap_no_conn_pending(chan)) {
-		struct l2cap_conn_rsp rsp;
-		char buf[128];
-		rsp.scid = cpu_to_le16(chan->dcid);
-		rsp.dcid = cpu_to_le16(chan->scid);
-
-		if (result == L2CAP_CR_SUCCESS) {
-			/* Send successful response */
-			rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
-			rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
-		} else {
-			/* Send negative response */
-			rsp.result = cpu_to_le16(L2CAP_CR_NO_MEM);
-			rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
-		}
-
-		l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_RSP,
-			       sizeof(rsp), &rsp);
-
-		if (result == L2CAP_CR_SUCCESS) {
-			l2cap_state_change(chan, BT_CONFIG);
-			set_bit(CONF_REQ_SENT, &chan->conf_state);
-			l2cap_send_cmd(chan->conn, l2cap_get_ident(chan->conn),
-				       L2CAP_CONF_REQ,
-				       l2cap_build_conf_req(chan, buf, sizeof(buf)), buf);
-			chan->num_conf_req++;
-		}
-	}
-}
-
-static void l2cap_do_move_initiate(struct l2cap_chan *chan, u8 local_amp_id,
-				   u8 remote_amp_id)
-{
-	l2cap_move_setup(chan);
-	chan->move_id = local_amp_id;
-	chan->move_state = L2CAP_MOVE_WAIT_RSP;
-
-	l2cap_send_move_chan_req(chan, remote_amp_id);
-}
-
-static void l2cap_do_move_respond(struct l2cap_chan *chan, int result)
-{
-	struct hci_chan *hchan = NULL;
-
-	/* Placeholder - get hci_chan for logical link */
-
-	if (hchan) {
-		if (hchan->state == BT_CONNECTED) {
-			/* Logical link is ready to go */
-			chan->hs_hcon = hchan->conn;
-			chan->hs_hcon->l2cap_data = chan->conn;
-			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
-			l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
-
-			l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
-		} else {
-			/* Wait for logical link to be ready */
-			chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
-		}
-	} else {
-		/* Logical link not available */
-		l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_ALLOWED);
-	}
-}
-
-static void l2cap_do_move_cancel(struct l2cap_chan *chan, int result)
-{
-	if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
-		u8 rsp_result;
-		if (result == -EINVAL)
-			rsp_result = L2CAP_MR_BAD_ID;
-		else
-			rsp_result = L2CAP_MR_NOT_ALLOWED;
-
-		l2cap_send_move_chan_rsp(chan, rsp_result);
-	}
-
-	chan->move_role = L2CAP_MOVE_ROLE_NONE;
-	chan->move_state = L2CAP_MOVE_STABLE;
-
-	/* Restart data transmission */
-	l2cap_ertm_send(chan);
-}
-
-/* Invoke with locked chan */
-void __l2cap_physical_cfm(struct l2cap_chan *chan, int result)
-{
-	u8 local_amp_id = chan->local_amp_id;
-	u8 remote_amp_id = chan->remote_amp_id;
-
-	BT_DBG("chan %p, result %d, local_amp_id %d, remote_amp_id %d",
-	       chan, result, local_amp_id, remote_amp_id);
-
-	if (chan->state == BT_DISCONN || chan->state == BT_CLOSED)
-		return;
-
-	if (chan->state != BT_CONNECTED) {
-		l2cap_do_create(chan, result, local_amp_id, remote_amp_id);
-	} else if (result != L2CAP_MR_SUCCESS) {
-		l2cap_do_move_cancel(chan, result);
-	} else {
-		switch (chan->move_role) {
-		case L2CAP_MOVE_ROLE_INITIATOR:
-			l2cap_do_move_initiate(chan, local_amp_id,
-					       remote_amp_id);
-			break;
-		case L2CAP_MOVE_ROLE_RESPONDER:
-			l2cap_do_move_respond(chan, result);
-			break;
-		default:
-			l2cap_do_move_cancel(chan, result);
-			break;
-		}
-	}
-}
-
-static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
-					 struct l2cap_cmd_hdr *cmd,
-					 u16 cmd_len, void *data)
-{
-	struct l2cap_move_chan_req *req = data;
-	struct l2cap_move_chan_rsp rsp;
-	struct l2cap_chan *chan;
-	u16 icid = 0;
-	u16 result = L2CAP_MR_NOT_ALLOWED;
-
-	if (cmd_len != sizeof(*req))
-		return -EPROTO;
-
-	icid = le16_to_cpu(req->icid);
-
-	BT_DBG("icid 0x%4.4x, dest_amp_id %d", icid, req->dest_amp_id);
-
-	if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
-		return -EINVAL;
-
-	chan = l2cap_get_chan_by_dcid(conn, icid);
-	if (!chan) {
-		rsp.icid = cpu_to_le16(icid);
-		rsp.result = cpu_to_le16(L2CAP_MR_NOT_ALLOWED);
-		l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
-			       sizeof(rsp), &rsp);
-		return 0;
-	}
-
-	chan->ident = cmd->ident;
-
-	if (chan->scid < L2CAP_CID_DYN_START ||
-	    chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
-	    (chan->mode != L2CAP_MODE_ERTM &&
-	     chan->mode != L2CAP_MODE_STREAMING)) {
-		result = L2CAP_MR_NOT_ALLOWED;
-		goto send_move_response;
-	}
-
-	if (chan->local_amp_id == req->dest_amp_id) {
-		result = L2CAP_MR_SAME_ID;
-		goto send_move_response;
-	}
-
-	if (req->dest_amp_id != AMP_ID_BREDR) {
-		struct hci_dev *hdev;
-		hdev = hci_dev_get(req->dest_amp_id);
-		if (!hdev || hdev->dev_type != HCI_AMP ||
-		    !test_bit(HCI_UP, &hdev->flags)) {
-			if (hdev)
-				hci_dev_put(hdev);
-
-			result = L2CAP_MR_BAD_ID;
-			goto send_move_response;
-		}
-		hci_dev_put(hdev);
-	}
-
-	/* Detect a move collision.  Only send a collision response
-	 * if this side has "lost", otherwise proceed with the move.
-	 * The winner has the larger bd_addr.
-	 */
-	if ((__chan_is_moving(chan) ||
-	     chan->move_role != L2CAP_MOVE_ROLE_NONE) &&
-	    bacmp(&conn->hcon->src, &conn->hcon->dst) > 0) {
-		result = L2CAP_MR_COLLISION;
-		goto send_move_response;
-	}
-
-	chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
-	l2cap_move_setup(chan);
-	chan->move_id = req->dest_amp_id;
-
-	if (req->dest_amp_id == AMP_ID_BREDR) {
-		/* Moving to BR/EDR */
-		if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
-			chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
-			result = L2CAP_MR_PEND;
-		} else {
-			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
-			result = L2CAP_MR_SUCCESS;
-		}
-	} else {
-		chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
-		/* Placeholder - uncomment when amp functions are available */
-		/*amp_accept_physical(chan, req->dest_amp_id);*/
-		result = L2CAP_MR_PEND;
-	}
-
-send_move_response:
-	l2cap_send_move_chan_rsp(chan, result);
-
-	l2cap_chan_unlock(chan);
-	l2cap_chan_put(chan);
-
-	return 0;
-}
-
-static void l2cap_move_continue(struct l2cap_conn *conn, u16 icid, u16 result)
-{
-	struct l2cap_chan *chan;
-	struct hci_chan *hchan = NULL;
-
-	chan = l2cap_get_chan_by_scid(conn, icid);
-	if (!chan) {
-		l2cap_send_move_chan_cfm_icid(conn, icid);
-		return;
-	}
-
-	__clear_chan_timer(chan);
-	if (result == L2CAP_MR_PEND)
-		__set_chan_timer(chan, L2CAP_MOVE_ERTX_TIMEOUT);
-
-	switch (chan->move_state) {
-	case L2CAP_MOVE_WAIT_LOGICAL_COMP:
-		/* Move confirm will be sent when logical link
-		 * is complete.
-		 */
-		chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
-		break;
-	case L2CAP_MOVE_WAIT_RSP_SUCCESS:
-		if (result == L2CAP_MR_PEND) {
-			break;
-		} else if (test_bit(CONN_LOCAL_BUSY,
-				    &chan->conn_state)) {
-			chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
-		} else {
-			/* Logical link is up or moving to BR/EDR,
-			 * proceed with move
-			 */
-			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
-			l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
-		}
-		break;
-	case L2CAP_MOVE_WAIT_RSP:
-		/* Moving to AMP */
-		if (result == L2CAP_MR_SUCCESS) {
-			/* Remote is ready, send confirm immediately
-			 * after logical link is ready
-			 */
-			chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
-		} else {
-			/* Both logical link and move success
-			 * are required to confirm
-			 */
-			chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_COMP;
-		}
-
-		/* Placeholder - get hci_chan for logical link */
-		if (!hchan) {
-			/* Logical link not available */
-			l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
-			break;
-		}
-
-		/* If the logical link is not yet connected, do not
-		 * send confirmation.
-		 */
-		if (hchan->state != BT_CONNECTED)
-			break;
-
-		/* Logical link is already ready to go */
-
-		chan->hs_hcon = hchan->conn;
-		chan->hs_hcon->l2cap_data = chan->conn;
-
-		if (result == L2CAP_MR_SUCCESS) {
-			/* Can confirm now */
-			l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
-		} else {
-			/* Now only need move success
-			 * to confirm
-			 */
-			chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
-		}
-
-		l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
-		break;
-	default:
-		/* Any other amp move state means the move failed. */
-		chan->move_id = chan->local_amp_id;
-		l2cap_move_done(chan);
-		l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
-	}
-
-	l2cap_chan_unlock(chan);
-	l2cap_chan_put(chan);
-}
-
-static void l2cap_move_fail(struct l2cap_conn *conn, u8 ident, u16 icid,
-			    u16 result)
-{
-	struct l2cap_chan *chan;
-
-	chan = l2cap_get_chan_by_ident(conn, ident);
-	if (!chan) {
-		/* Could not locate channel, icid is best guess */
-		l2cap_send_move_chan_cfm_icid(conn, icid);
-		return;
-	}
-
-	__clear_chan_timer(chan);
-
-	if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
-		if (result == L2CAP_MR_COLLISION) {
-			chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
-		} else {
-			/* Cleanup - cancel move */
-			chan->move_id = chan->local_amp_id;
-			l2cap_move_done(chan);
-		}
-	}
-
-	l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
-
-	l2cap_chan_unlock(chan);
-	l2cap_chan_put(chan);
-}
-
-static int l2cap_move_channel_rsp(struct l2cap_conn *conn,
-				  struct l2cap_cmd_hdr *cmd,
-				  u16 cmd_len, void *data)
-{
-	struct l2cap_move_chan_rsp *rsp = data;
-	u16 icid, result;
-
-	if (cmd_len != sizeof(*rsp))
-		return -EPROTO;
-
-	icid = le16_to_cpu(rsp->icid);
-	result = le16_to_cpu(rsp->result);
-
-	BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
-
-	if (result == L2CAP_MR_SUCCESS || result == L2CAP_MR_PEND)
-		l2cap_move_continue(conn, icid, result);
-	else
-		l2cap_move_fail(conn, cmd->ident, icid, result);
-
-	return 0;
-}
-
-static int l2cap_move_channel_confirm(struct l2cap_conn *conn,
-				      struct l2cap_cmd_hdr *cmd,
-				      u16 cmd_len, void *data)
-{
-	struct l2cap_move_chan_cfm *cfm = data;
-	struct l2cap_chan *chan;
-	u16 icid, result;
-
-	if (cmd_len != sizeof(*cfm))
-		return -EPROTO;
-
-	icid = le16_to_cpu(cfm->icid);
-	result = le16_to_cpu(cfm->result);
-
-	BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
-
-	chan = l2cap_get_chan_by_dcid(conn, icid);
-	if (!chan) {
-		/* Spec requires a response even if the icid was not found */
-		l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
-		return 0;
-	}
-
-	if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM) {
-		if (result == L2CAP_MC_CONFIRMED) {
-			chan->local_amp_id = chan->move_id;
-			if (chan->local_amp_id == AMP_ID_BREDR)
-				__release_logical_link(chan);
-		} else {
-			chan->move_id = chan->local_amp_id;
-		}
-
-		l2cap_move_done(chan);
-	}
-
-	l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
-
-	l2cap_chan_unlock(chan);
-	l2cap_chan_put(chan);
-
-	return 0;
-}
-
-static inline int l2cap_move_channel_confirm_rsp(struct l2cap_conn *conn,
-						 struct l2cap_cmd_hdr *cmd,
-						 u16 cmd_len, void *data)
-{
-	struct l2cap_move_chan_cfm_rsp *rsp = data;
-	struct l2cap_chan *chan;
-	u16 icid;
-
-	if (cmd_len != sizeof(*rsp))
-		return -EPROTO;
-
-	icid = le16_to_cpu(rsp->icid);
-
-	BT_DBG("icid 0x%4.4x", icid);
-
-	chan = l2cap_get_chan_by_scid(conn, icid);
-	if (!chan)
-		return 0;
-
-	__clear_chan_timer(chan);
-
-	if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM_RSP) {
-		chan->local_amp_id = chan->move_id;
-
-		if (chan->local_amp_id == AMP_ID_BREDR && chan->hs_hchan)
-			__release_logical_link(chan);
-
-		l2cap_move_done(chan);
-	}
-
-	l2cap_chan_unlock(chan);
-	l2cap_chan_put(chan);
-
-	return 0;
-}
-
 static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
 					      struct l2cap_cmd_hdr *cmd,
 					      u16 cmd_len, u8 *data)
@@ -5745,7 +4761,6 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn,
 		break;
 
 	case L2CAP_CONN_RSP:
-	case L2CAP_CREATE_CHAN_RSP:
 		l2cap_connect_create_rsp(conn, cmd, cmd_len, data);
 		break;
 
@@ -5780,26 +4795,6 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn,
 		l2cap_information_rsp(conn, cmd, cmd_len, data);
 		break;
 
-	case L2CAP_CREATE_CHAN_REQ:
-		err = l2cap_create_channel_req(conn, cmd, cmd_len, data);
-		break;
-
-	case L2CAP_MOVE_CHAN_REQ:
-		err = l2cap_move_channel_req(conn, cmd, cmd_len, data);
-		break;
-
-	case L2CAP_MOVE_CHAN_RSP:
-		l2cap_move_channel_rsp(conn, cmd, cmd_len, data);
-		break;
-
-	case L2CAP_MOVE_CHAN_CFM:
-		err = l2cap_move_channel_confirm(conn, cmd, cmd_len, data);
-		break;
-
-	case L2CAP_MOVE_CHAN_CFM_RSP:
-		l2cap_move_channel_confirm_rsp(conn, cmd, cmd_len, data);
-		break;
-
 	default:
 		BT_ERR("Unknown BR/EDR signaling command 0x%2.2x", cmd->code);
 		err = -EINVAL;
@@ -7051,8 +6046,8 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan,
 		if (control->final) {
 			clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
 
-			if (!test_and_clear_bit(CONN_REJ_ACT, &chan->conn_state) &&
-			    !__chan_is_moving(chan)) {
+			if (!test_and_clear_bit(CONN_REJ_ACT,
+						&chan->conn_state)) {
 				control->final = 0;
 				l2cap_retransmit_all(chan, control);
 			}
@@ -7245,11 +6240,7 @@ static int l2cap_finish_move(struct l2cap_chan *chan)
 	BT_DBG("chan %p", chan);
 
 	chan->rx_state = L2CAP_RX_STATE_RECV;
-
-	if (chan->hs_hcon)
-		chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
-	else
-		chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+	chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
 
 	return l2cap_resegment(chan);
 }
@@ -7316,11 +6307,7 @@ static int l2cap_rx_state_wait_f(struct l2cap_chan *chan,
 	 */
 	chan->next_tx_seq = control->reqseq;
 	chan->unacked_frames = 0;
-
-	if (chan->hs_hcon)
-		chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
-	else
-		chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+	chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
 
 	err = l2cap_resegment(chan);
 
@@ -7672,21 +6659,10 @@ static void l2cap_data_channel(struct l2cap_conn *conn, u16 cid,
 
 	chan = l2cap_get_chan_by_scid(conn, cid);
 	if (!chan) {
-		if (cid == L2CAP_CID_A2MP) {
-			chan = a2mp_channel_create(conn, skb);
-			if (!chan) {
-				kfree_skb(skb);
-				return;
-			}
-
-			l2cap_chan_hold(chan);
-			l2cap_chan_lock(chan);
-		} else {
-			BT_DBG("unknown cid 0x%4.4x", cid);
-			/* Drop packet and return */
-			kfree_skb(skb);
-			return;
-		}
+		BT_DBG("unknown cid 0x%4.4x", cid);
+		/* Drop packet and return */
+		kfree_skb(skb);
+		return;
 	}
 
 	BT_DBG("chan %p, len %d", chan, skb->len);
@@ -7887,10 +6863,6 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon)
 
 	conn->local_fixed_chan = L2CAP_FC_SIG_BREDR | L2CAP_FC_CONNLESS;
 
-	if (hcon->type == ACL_LINK &&
-	    hci_dev_test_flag(hcon->hdev, HCI_HS_ENABLED))
-		conn->local_fixed_chan |= L2CAP_FC_A2MP;
-
 	if (hci_dev_test_flag(hcon->hdev, HCI_LE_ENABLED) &&
 	    (bredr_sc_enabled(hcon->hdev) ||
 	     hci_dev_test_flag(hcon->hdev, HCI_FORCE_BREDR_SMP)))
@@ -8355,11 +7327,6 @@ static void l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
 		BT_DBG("chan %p scid 0x%4.4x state %s", chan, chan->scid,
 		       state_to_string(chan->state));
 
-		if (chan->scid == L2CAP_CID_A2MP) {
-			l2cap_chan_unlock(chan);
-			continue;
-		}
-
 		if (!status && encrypt)
 			chan->sec_level = hcon->sec_level;
 
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index e50d3d102078e..ee7a41d6994fc 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1027,23 +1027,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 			break;
 		}
 
-		if (opt > BT_CHANNEL_POLICY_AMP_PREFERRED) {
-			err = -EINVAL;
-			break;
-		}
-
-		if (chan->mode != L2CAP_MODE_ERTM &&
-		    chan->mode != L2CAP_MODE_STREAMING) {
-			err = -EOPNOTSUPP;
-			break;
-		}
-
-		chan->chan_policy = (u8) opt;
-
-		if (sk->sk_state == BT_CONNECTED &&
-		    chan->move_role == L2CAP_MOVE_ROLE_NONE)
-			l2cap_move_start(chan);
-
+		err = -EOPNOTSUPP;
 		break;
 
 	case BT_SNDMTU:
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 324f06e2e9ddb..2186ac57981e5 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -835,8 +835,6 @@ static u32 get_supported_settings(struct hci_dev *hdev)
 
 		if (lmp_ssp_capable(hdev)) {
 			settings |= MGMT_SETTING_SSP;
-			if (IS_ENABLED(CONFIG_BT_HS))
-				settings |= MGMT_SETTING_HS;
 		}
 
 		if (lmp_sc_capable(hdev))
@@ -901,9 +899,6 @@ static u32 get_current_settings(struct hci_dev *hdev)
 	if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED))
 		settings |= MGMT_SETTING_SSP;
 
-	if (hci_dev_test_flag(hdev, HCI_HS_ENABLED))
-		settings |= MGMT_SETTING_HS;
-
 	if (hci_dev_test_flag(hdev, HCI_ADVERTISING))
 		settings |= MGMT_SETTING_ADVERTISING;
 
@@ -1930,7 +1925,6 @@ static void set_ssp_complete(struct hci_dev *hdev, void *data, int err)
 
 		if (enable && hci_dev_test_and_clear_flag(hdev,
 							  HCI_SSP_ENABLED)) {
-			hci_dev_clear_flag(hdev, HCI_HS_ENABLED);
 			new_settings(hdev, NULL);
 		}
 
@@ -1943,12 +1937,6 @@ static void set_ssp_complete(struct hci_dev *hdev, void *data, int err)
 		changed = !hci_dev_test_and_set_flag(hdev, HCI_SSP_ENABLED);
 	} else {
 		changed = hci_dev_test_and_clear_flag(hdev, HCI_SSP_ENABLED);
-
-		if (!changed)
-			changed = hci_dev_test_and_clear_flag(hdev,
-							      HCI_HS_ENABLED);
-		else
-			hci_dev_clear_flag(hdev, HCI_HS_ENABLED);
 	}
 
 	mgmt_pending_foreach(MGMT_OP_SET_SSP, hdev, settings_rsp, &match);
@@ -2012,11 +2000,6 @@ static int set_ssp(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
 		} else {
 			changed = hci_dev_test_and_clear_flag(hdev,
 							      HCI_SSP_ENABLED);
-			if (!changed)
-				changed = hci_dev_test_and_clear_flag(hdev,
-								      HCI_HS_ENABLED);
-			else
-				hci_dev_clear_flag(hdev, HCI_HS_ENABLED);
 		}
 
 		err = send_settings_rsp(sk, MGMT_OP_SET_SSP, hdev);
@@ -2062,63 +2045,10 @@ static int set_ssp(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
 
 static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
 {
-	struct mgmt_mode *cp = data;
-	bool changed;
-	u8 status;
-	int err;
-
 	bt_dev_dbg(hdev, "sock %p", sk);
 
-	if (!IS_ENABLED(CONFIG_BT_HS))
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
+	return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
 				       MGMT_STATUS_NOT_SUPPORTED);
-
-	status = mgmt_bredr_support(hdev);
-	if (status)
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS, status);
-
-	if (!lmp_ssp_capable(hdev))
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
-				       MGMT_STATUS_NOT_SUPPORTED);
-
-	if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED))
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
-				       MGMT_STATUS_REJECTED);
-
-	if (cp->val != 0x00 && cp->val != 0x01)
-		return mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
-				       MGMT_STATUS_INVALID_PARAMS);
-
-	hci_dev_lock(hdev);
-
-	if (pending_find(MGMT_OP_SET_SSP, hdev)) {
-		err = mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
-				      MGMT_STATUS_BUSY);
-		goto unlock;
-	}
-
-	if (cp->val) {
-		changed = !hci_dev_test_and_set_flag(hdev, HCI_HS_ENABLED);
-	} else {
-		if (hdev_is_powered(hdev)) {
-			err = mgmt_cmd_status(sk, hdev->id, MGMT_OP_SET_HS,
-					      MGMT_STATUS_REJECTED);
-			goto unlock;
-		}
-
-		changed = hci_dev_test_and_clear_flag(hdev, HCI_HS_ENABLED);
-	}
-
-	err = send_settings_rsp(sk, MGMT_OP_SET_HS, hdev);
-	if (err < 0)
-		goto unlock;
-
-	if (changed)
-		err = new_settings(hdev, sk);
-
-unlock:
-	hci_dev_unlock(hdev);
-	return err;
 }
 
 static void set_le_complete(struct hci_dev *hdev, void *data, int err)
@@ -6766,7 +6696,6 @@ static int set_bredr(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
 			hci_dev_clear_flag(hdev, HCI_SSP_ENABLED);
 			hci_dev_clear_flag(hdev, HCI_LINK_SECURITY);
 			hci_dev_clear_flag(hdev, HCI_FAST_CONNECTABLE);
-			hci_dev_clear_flag(hdev, HCI_HS_ENABLED);
 		}
 
 		hci_dev_change_flag(hdev, HCI_BREDR_ENABLED);
-- 
2.43.0

[PATCH 6.7 347/713] Bluetooth: hci_event: Fix not indicating new connection for BIG Sync

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit eeda1bf97bb500a901f7a9ee5615bad2160f2378 ]

BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace could attempt
to free resources allocated to the device object while scanning.

Fixes: 1d11d70d1f6b ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 21 ++++++++++++++-------
 net/bluetooth/mgmt.c      |  4 ++++
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 55daada8dc15d..9ee66b393981b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2524,9 +2524,7 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
 	 * Only those in BT_CONFIG or BT_CONNECTED states can be
 	 * considered connected.
 	 */
-	if (conn &&
-	    (conn->state == BT_CONFIG || conn->state == BT_CONNECTED) &&
-	    !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
+	if (conn && (conn->state == BT_CONFIG || conn->state == BT_CONNECTED))
 		mgmt_device_connected(hdev, conn, name, name_len);
 
 	if (discov->state == DISCOVERY_STOPPED)
@@ -3758,8 +3756,9 @@ static void hci_remote_features_evt(struct hci_dev *hdev, void *data,
 		bacpy(&cp.bdaddr, &conn->dst);
 		cp.pscan_rep_mode = 0x02;
 		hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
-	} else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
+	} else {
 		mgmt_device_connected(hdev, conn, NULL, 0);
+	}
 
 	if (!hci_outgoing_auth_needed(hdev, conn)) {
 		conn->state = BT_CONNECTED;
@@ -3932,6 +3931,11 @@ static u8 hci_cc_le_setup_iso_path(struct hci_dev *hdev, void *data,
 		 * last.
 		 */
 		hci_connect_cfm(conn, rp->status);
+
+		/* Notify device connected in case it is a BIG Sync */
+		if (!rp->status && test_bit(HCI_CONN_BIG_SYNC, &conn->flags))
+			mgmt_device_connected(hdev, conn, NULL, 0);
+
 		break;
 	}
 
@@ -5006,8 +5010,9 @@ static void hci_remote_ext_features_evt(struct hci_dev *hdev, void *data,
 		bacpy(&cp.bdaddr, &conn->dst);
 		cp.pscan_rep_mode = 0x02;
 		hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
-	} else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
+	} else {
 		mgmt_device_connected(hdev, conn, NULL, 0);
+	}
 
 	if (!hci_outgoing_auth_needed(hdev, conn)) {
 		conn->state = BT_CONNECTED;
@@ -5980,8 +5985,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
 		goto unlock;
 	}
 
-	if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
-		mgmt_device_connected(hdev, conn, NULL, 0);
+	mgmt_device_connected(hdev, conn, NULL, 0);
 
 	conn->sec_level = BT_SECURITY_LOW;
 	conn->state = BT_CONFIG;
@@ -7210,6 +7214,9 @@ static void hci_le_big_info_adv_report_evt(struct hci_dev *hdev, void *data,
 	/* Notify iso layer */
 	hci_connect_cfm(pa_sync, 0x00);
 
+	/* Notify MGMT layer */
+	mgmt_device_connected(hdev, pa_sync, NULL, 0);
+
 unlock:
 	hci_dev_unlock(hdev);
 }
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2186ac57981e5..b21b981f15a38 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3118,6 +3118,7 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data,
 static u8 link_to_bdaddr(u8 link_type, u8 addr_type)
 {
 	switch (link_type) {
+	case ISO_LINK:
 	case LE_LINK:
 		switch (addr_type) {
 		case ADDR_LE_DEV_PUBLIC:
@@ -9610,6 +9611,9 @@ void mgmt_device_connected(struct hci_dev *hdev, struct hci_conn *conn,
 	u16 eir_len = 0;
 	u32 flags = 0;
 
+	if (test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
+		return;
+
 	/* allocate buff for LE or BR/EDR adv */
 	if (conn->le_adv_data_len > 0)
 		skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_CONNECTED,
-- 
2.43.0

[PATCH 6.7 348/713] Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()

[Sasha Levin]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

[ Upstream commit 56d074d26c5828773b00b2185dd7e1d08273b8e8 ]

The optional variants for the gpiod_get() family of functions return NULL
if the GPIO in question is not associated with this device. They return
ERR_PTR() on any other error. NULL descriptors are graciously handled by
GPIOLIB and can be safely passed to any of the GPIO consumer interfaces
as they will return 0 and act as if the function succeeded. If one is
using the optional variant, then there's no point in checking for NULL.

Fixes: 6845667146a2 ("Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_qca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a65de7309da4c..bb69b7ea8119d 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2304,7 +2304,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR_OR_NULL(qcadev->bt_en) &&
+		if (IS_ERR(qcadev->bt_en) &&
 		    (data->soc_type == QCA_WCN6750 ||
 		     data->soc_type == QCA_WCN6855)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
@@ -2313,7 +2313,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
+		if (IS_ERR(qcadev->sw_ctrl) &&
 		    (data->soc_type == QCA_WCN6750 ||
 		     data->soc_type == QCA_WCN6855 ||
 		     data->soc_type == QCA_WCN7850))
@@ -2335,7 +2335,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	default:
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
+		if (IS_ERR(qcadev->bt_en)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}
-- 
2.43.0

[PATCH 6.7 349/713] Bluetooth: hci_core: Cancel request on command timeout

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 63298d6e752fc0ec7f5093860af8bc9f047b30c8 ]

If command has timed out call __hci_cmd_sync_cancel to notify the
hci_req since it will inevitably cause a timeout.

This also rework the code around __hci_cmd_sync_cancel since it was
wrongly assuming it needs to cancel timer as well, but sometimes the
timers have not been started or in fact they already had timed out in
which case they don't need to be cancel yet again.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 2615fd9a7c25 ("Bluetooth: hci_sync: Fix overwriting request callback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci_sync.h |  2 +-
 net/bluetooth/hci_core.c         | 84 ++++++++++++++++++++++----------
 net/bluetooth/hci_request.c      |  2 +-
 net/bluetooth/hci_sync.c         | 20 ++++----
 net/bluetooth/mgmt.c             |  2 +-
 5 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index 6efbc2152146b..e2582c2425449 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -42,7 +42,7 @@ int __hci_cmd_sync_status_sk(struct hci_dev *hdev, u16 opcode, u32 plen,
 void hci_cmd_sync_init(struct hci_dev *hdev);
 void hci_cmd_sync_clear(struct hci_dev *hdev);
 void hci_cmd_sync_cancel(struct hci_dev *hdev, int err);
-void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err);
+void hci_cmd_sync_cancel_sync(struct hci_dev *hdev, int err);
 
 int hci_cmd_sync_submit(struct hci_dev *hdev, hci_cmd_sync_work_func_t func,
 			void *data, hci_cmd_sync_work_destroy_t destroy);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2821a42cefdc6..539305b9a0e27 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1492,10 +1492,11 @@ static void hci_cmd_timeout(struct work_struct *work)
 					    cmd_timer.work);
 
 	if (hdev->sent_cmd) {
-		struct hci_command_hdr *sent = (void *) hdev->sent_cmd->data;
-		u16 opcode = __le16_to_cpu(sent->opcode);
+		u16 opcode = hci_skb_opcode(hdev->sent_cmd);
 
 		bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode);
+
+		hci_cmd_sync_cancel_sync(hdev, ETIMEDOUT);
 	} else {
 		bt_dev_err(hdev, "command tx timeout");
 	}
@@ -2826,6 +2827,23 @@ int hci_unregister_suspend_notifier(struct hci_dev *hdev)
 	return ret;
 }
 
+/* Cancel ongoing command synchronously:
+ *
+ * - Cancel command timer
+ * - Reset command counter
+ * - Cancel command request
+ */
+static void hci_cancel_cmd_sync(struct hci_dev *hdev, int err)
+{
+	bt_dev_dbg(hdev, "err 0x%2.2x", err);
+
+	cancel_delayed_work_sync(&hdev->cmd_timer);
+	cancel_delayed_work_sync(&hdev->ncmd_timer);
+	atomic_set(&hdev->cmd_cnt, 1);
+
+	hci_cmd_sync_cancel_sync(hdev, -err);
+}
+
 /* Suspend HCI device */
 int hci_suspend_dev(struct hci_dev *hdev)
 {
@@ -2843,7 +2861,7 @@ int hci_suspend_dev(struct hci_dev *hdev)
 		return 0;
 
 	/* Cancel potentially blocking sync operation before suspend */
-	__hci_cmd_sync_cancel(hdev, -EHOSTDOWN);
+	hci_cancel_cmd_sync(hdev, -EHOSTDOWN);
 
 	hci_req_sync_lock(hdev);
 	ret = hci_suspend_sync(hdev);
@@ -4128,6 +4146,33 @@ static void hci_rx_work(struct work_struct *work)
 	}
 }
 
+static void hci_send_cmd_sync(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	int err;
+
+	bt_dev_dbg(hdev, "skb %p", skb);
+
+	kfree_skb(hdev->sent_cmd);
+
+	hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
+	if (!hdev->sent_cmd) {
+		skb_queue_head(&hdev->cmd_q, skb);
+		queue_work(hdev->workqueue, &hdev->cmd_work);
+		return;
+	}
+
+	err = hci_send_frame(hdev, skb);
+	if (err < 0) {
+		hci_cmd_sync_cancel_sync(hdev, err);
+		return;
+	}
+
+	if (hci_req_status_pend(hdev))
+		hci_dev_set_flag(hdev, HCI_CMD_PENDING);
+
+	atomic_dec(&hdev->cmd_cnt);
+}
+
 static void hci_cmd_work(struct work_struct *work)
 {
 	struct hci_dev *hdev = container_of(work, struct hci_dev, cmd_work);
@@ -4142,30 +4187,15 @@ static void hci_cmd_work(struct work_struct *work)
 		if (!skb)
 			return;
 
-		kfree_skb(hdev->sent_cmd);
-
-		hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
-		if (hdev->sent_cmd) {
-			int res;
-			if (hci_req_status_pend(hdev))
-				hci_dev_set_flag(hdev, HCI_CMD_PENDING);
-			atomic_dec(&hdev->cmd_cnt);
+		hci_send_cmd_sync(hdev, skb);
 
-			res = hci_send_frame(hdev, skb);
-			if (res < 0)
-				__hci_cmd_sync_cancel(hdev, -res);
-
-			rcu_read_lock();
-			if (test_bit(HCI_RESET, &hdev->flags) ||
-			    hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
-				cancel_delayed_work(&hdev->cmd_timer);
-			else
-				queue_delayed_work(hdev->workqueue, &hdev->cmd_timer,
-						   HCI_CMD_TIMEOUT);
-			rcu_read_unlock();
-		} else {
-			skb_queue_head(&hdev->cmd_q, skb);
-			queue_work(hdev->workqueue, &hdev->cmd_work);
-		}
+		rcu_read_lock();
+		if (test_bit(HCI_RESET, &hdev->flags) ||
+		    hci_dev_test_flag(hdev, HCI_CMD_DRAIN_WORKQUEUE))
+			cancel_delayed_work(&hdev->cmd_timer);
+		else
+			queue_delayed_work(hdev->workqueue, &hdev->cmd_timer,
+					   HCI_CMD_TIMEOUT);
+		rcu_read_unlock();
 	}
 }
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 6e023b0104b03..00e02138003ec 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -895,7 +895,7 @@ void hci_request_setup(struct hci_dev *hdev)
 
 void hci_request_cancel_all(struct hci_dev *hdev)
 {
-	__hci_cmd_sync_cancel(hdev, ENODEV);
+	hci_cmd_sync_cancel_sync(hdev, ENODEV);
 
 	cancel_interleave_scan(hdev);
 }
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b90ee68bba1d6..f4c53c428305b 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -652,7 +652,7 @@ void hci_cmd_sync_clear(struct hci_dev *hdev)
 	mutex_unlock(&hdev->cmd_sync_work_lock);
 }
 
-void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
+void hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
 {
 	bt_dev_dbg(hdev, "err 0x%2.2x", err);
 
@@ -660,15 +660,17 @@ void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
 		hdev->req_result = err;
 		hdev->req_status = HCI_REQ_CANCELED;
 
-		cancel_delayed_work_sync(&hdev->cmd_timer);
-		cancel_delayed_work_sync(&hdev->ncmd_timer);
-		atomic_set(&hdev->cmd_cnt, 1);
-
-		wake_up_interruptible(&hdev->req_wait_q);
+		queue_work(hdev->workqueue, &hdev->cmd_sync_cancel_work);
 	}
 }
+EXPORT_SYMBOL(hci_cmd_sync_cancel);
 
-void hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
+/* Cancel ongoing command request synchronously:
+ *
+ * - Set result and mark status to HCI_REQ_CANCELED
+ * - Wakeup command sync thread
+ */
+void hci_cmd_sync_cancel_sync(struct hci_dev *hdev, int err)
 {
 	bt_dev_dbg(hdev, "err 0x%2.2x", err);
 
@@ -676,10 +678,10 @@ void hci_cmd_sync_cancel(struct hci_dev *hdev, int err)
 		hdev->req_result = err;
 		hdev->req_status = HCI_REQ_CANCELED;
 
-		queue_work(hdev->workqueue, &hdev->cmd_sync_cancel_work);
+		wake_up_interruptible(&hdev->req_wait_q);
 	}
 }
-EXPORT_SYMBOL(hci_cmd_sync_cancel);
+EXPORT_SYMBOL(hci_cmd_sync_cancel_sync);
 
 /* Submit HCI command to be run in as cmd_sync_work:
  *
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index b21b981f15a38..2ffda2ffdbda8 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1404,7 +1404,7 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data,
 
 	/* Cancel potentially blocking sync operation before power off */
 	if (cp->val == 0x00) {
-		__hci_cmd_sync_cancel(hdev, -EHOSTDOWN);
+		hci_cmd_sync_cancel_sync(hdev, -EHOSTDOWN);
 		err = hci_cmd_sync_queue(hdev, set_powered_sync, cmd,
 					 mgmt_set_powered_complete);
 	} else {
-- 
2.43.0

[PATCH 6.7 350/713] Bluetooth: hci_sync: Fix overwriting request callback

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 2615fd9a7c2507eb3be3fbe49dcec88a2f56454a ]

In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_conn.c         |  2 +-
 net/bluetooth/hci_core.c         | 46 ++++++++++++++++++++++----------
 net/bluetooth/hci_event.c        | 18 ++++++-------
 net/bluetooth/hci_sync.c         | 21 ++++++++++++---
 5 files changed, 61 insertions(+), 27 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 65dd286693527..24446038d8a6d 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -553,6 +553,7 @@ struct hci_dev {
 	__u32			req_status;
 	__u32			req_result;
 	struct sk_buff		*req_skb;
+	struct sk_buff		*req_rsp;
 
 	void			*smp_data;
 	void			*smp_bredr_data;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 029bf74ec5e78..50c55d7335692 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -2977,7 +2977,7 @@ int hci_abort_conn(struct hci_conn *conn, u8 reason)
 		case HCI_EV_LE_CONN_COMPLETE:
 		case HCI_EV_LE_ENHANCED_CONN_COMPLETE:
 		case HCI_EVT_LE_CIS_ESTABLISHED:
-			hci_cmd_sync_cancel(hdev, -ECANCELED);
+			hci_cmd_sync_cancel(hdev, ECANCELED);
 			break;
 		}
 	}
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 539305b9a0e27..96707deef296b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1491,8 +1491,8 @@ static void hci_cmd_timeout(struct work_struct *work)
 	struct hci_dev *hdev = container_of(work, struct hci_dev,
 					    cmd_timer.work);
 
-	if (hdev->sent_cmd) {
-		u16 opcode = hci_skb_opcode(hdev->sent_cmd);
+	if (hdev->req_skb) {
+		u16 opcode = hci_skb_opcode(hdev->req_skb);
 
 		bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode);
 
@@ -2796,6 +2796,7 @@ void hci_release_dev(struct hci_dev *hdev)
 	ida_destroy(&hdev->unset_handle_ida);
 	ida_simple_remove(&hci_index_ida, hdev->id);
 	kfree_skb(hdev->sent_cmd);
+	kfree_skb(hdev->req_skb);
 	kfree_skb(hdev->recv_event);
 	kfree(hdev);
 }
@@ -3125,21 +3126,33 @@ int __hci_cmd_send(struct hci_dev *hdev, u16 opcode, u32 plen,
 EXPORT_SYMBOL(__hci_cmd_send);
 
 /* Get data from the previously sent command */
-void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode)
+static void *hci_cmd_data(struct sk_buff *skb, __u16 opcode)
 {
 	struct hci_command_hdr *hdr;
 
-	if (!hdev->sent_cmd)
+	if (!skb || skb->len < HCI_COMMAND_HDR_SIZE)
 		return NULL;
 
-	hdr = (void *) hdev->sent_cmd->data;
+	hdr = (void *)skb->data;
 
 	if (hdr->opcode != cpu_to_le16(opcode))
 		return NULL;
 
-	BT_DBG("%s opcode 0x%4.4x", hdev->name, opcode);
+	return skb->data + HCI_COMMAND_HDR_SIZE;
+}
 
-	return hdev->sent_cmd->data + HCI_COMMAND_HDR_SIZE;
+/* Get data from the previously sent command */
+void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode)
+{
+	void *data;
+
+	/* Check if opcode matches last sent command */
+	data = hci_cmd_data(hdev->sent_cmd, opcode);
+	if (!data)
+		/* Check if opcode matches last request */
+		data = hci_cmd_data(hdev->req_skb, opcode);
+
+	return data;
 }
 
 /* Get data from last received event */
@@ -4040,17 +4053,19 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
 	if (!status && !hci_req_is_complete(hdev))
 		return;
 
+	skb = hdev->req_skb;
+
 	/* If this was the last command in a request the complete
-	 * callback would be found in hdev->sent_cmd instead of the
+	 * callback would be found in hdev->req_skb instead of the
 	 * command queue (hdev->cmd_q).
 	 */
-	if (bt_cb(hdev->sent_cmd)->hci.req_flags & HCI_REQ_SKB) {
-		*req_complete_skb = bt_cb(hdev->sent_cmd)->hci.req_complete_skb;
+	if (skb && bt_cb(skb)->hci.req_flags & HCI_REQ_SKB) {
+		*req_complete_skb = bt_cb(skb)->hci.req_complete_skb;
 		return;
 	}
 
-	if (bt_cb(hdev->sent_cmd)->hci.req_complete) {
-		*req_complete = bt_cb(hdev->sent_cmd)->hci.req_complete;
+	if (skb && bt_cb(skb)->hci.req_complete) {
+		*req_complete = bt_cb(skb)->hci.req_complete;
 		return;
 	}
 
@@ -4167,8 +4182,11 @@ static void hci_send_cmd_sync(struct hci_dev *hdev, struct sk_buff *skb)
 		return;
 	}
 
-	if (hci_req_status_pend(hdev))
-		hci_dev_set_flag(hdev, HCI_CMD_PENDING);
+	if (hci_req_status_pend(hdev) &&
+	    !hci_dev_test_and_set_flag(hdev, HCI_CMD_PENDING)) {
+		kfree_skb(hdev->req_skb);
+		hdev->req_skb = skb_clone(skb, GFP_KERNEL);
+	}
 
 	atomic_dec(&hdev->cmd_cnt);
 }
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 9ee66b393981b..6275b14b56927 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4381,7 +4381,7 @@ static void hci_cmd_status_evt(struct hci_dev *hdev, void *data,
 	 * (since for this kind of commands there will not be a command
 	 * complete event).
 	 */
-	if (ev->status || (hdev->sent_cmd && !hci_skb_event(hdev->sent_cmd))) {
+	if (ev->status || (hdev->req_skb && !hci_skb_event(hdev->req_skb))) {
 		hci_req_cmd_complete(hdev, *opcode, ev->status, req_complete,
 				     req_complete_skb);
 		if (hci_dev_test_flag(hdev, HCI_CMD_PENDING)) {
@@ -7327,10 +7327,10 @@ static void hci_le_meta_evt(struct hci_dev *hdev, void *data,
 	bt_dev_dbg(hdev, "subevent 0x%2.2x", ev->subevent);
 
 	/* Only match event if command OGF is for LE */
-	if (hdev->sent_cmd &&
-	    hci_opcode_ogf(hci_skb_opcode(hdev->sent_cmd)) == 0x08 &&
-	    hci_skb_event(hdev->sent_cmd) == ev->subevent) {
-		*opcode = hci_skb_opcode(hdev->sent_cmd);
+	if (hdev->req_skb &&
+	    hci_opcode_ogf(hci_skb_opcode(hdev->req_skb)) == 0x08 &&
+	    hci_skb_event(hdev->req_skb) == ev->subevent) {
+		*opcode = hci_skb_opcode(hdev->req_skb);
 		hci_req_cmd_complete(hdev, *opcode, 0x00, req_complete,
 				     req_complete_skb);
 	}
@@ -7717,10 +7717,10 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 	}
 
 	/* Only match event if command OGF is not for LE */
-	if (hdev->sent_cmd &&
-	    hci_opcode_ogf(hci_skb_opcode(hdev->sent_cmd)) != 0x08 &&
-	    hci_skb_event(hdev->sent_cmd) == event) {
-		hci_req_cmd_complete(hdev, hci_skb_opcode(hdev->sent_cmd),
+	if (hdev->req_skb &&
+	    hci_opcode_ogf(hci_skb_opcode(hdev->req_skb)) != 0x08 &&
+	    hci_skb_event(hdev->req_skb) == event) {
+		hci_req_cmd_complete(hdev, hci_skb_opcode(hdev->req_skb),
 				     status, &req_complete, &req_complete_skb);
 		req_evt = event;
 	}
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index f4c53c428305b..183501f921814 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -32,6 +32,10 @@ static void hci_cmd_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
 	hdev->req_result = result;
 	hdev->req_status = HCI_REQ_DONE;
 
+	/* Free the request command so it is not used as response */
+	kfree_skb(hdev->req_skb);
+	hdev->req_skb = NULL;
+
 	if (skb) {
 		struct sock *sk = hci_skb_sk(skb);
 
@@ -39,7 +43,7 @@ static void hci_cmd_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
 		if (sk)
 			sock_put(sk);
 
-		hdev->req_skb = skb_get(skb);
+		hdev->req_rsp = skb_get(skb);
 	}
 
 	wake_up_interruptible(&hdev->req_wait_q);
@@ -187,8 +191,8 @@ struct sk_buff *__hci_cmd_sync_sk(struct hci_dev *hdev, u16 opcode, u32 plen,
 
 	hdev->req_status = 0;
 	hdev->req_result = 0;
-	skb = hdev->req_skb;
-	hdev->req_skb = NULL;
+	skb = hdev->req_rsp;
+	hdev->req_rsp = NULL;
 
 	bt_dev_dbg(hdev, "end: err %d", err);
 
@@ -4904,6 +4908,11 @@ int hci_dev_open_sync(struct hci_dev *hdev)
 			hdev->sent_cmd = NULL;
 		}
 
+		if (hdev->req_skb) {
+			kfree_skb(hdev->req_skb);
+			hdev->req_skb = NULL;
+		}
+
 		clear_bit(HCI_RUNNING, &hdev->flags);
 		hci_sock_dev_event(hdev, HCI_DEV_CLOSE);
 
@@ -5065,6 +5074,12 @@ int hci_dev_close_sync(struct hci_dev *hdev)
 		hdev->sent_cmd = NULL;
 	}
 
+	/* Drop last request */
+	if (hdev->req_skb) {
+		kfree_skb(hdev->req_skb);
+		hdev->req_skb = NULL;
+	}
+
 	clear_bit(HCI_RUNNING, &hdev->flags);
 	hci_sock_dev_event(hdev, HCI_DEV_CLOSE);
 
-- 
2.43.0

[PATCH 6.7 351/713] Bluetooth: hci_h5: Add ability to allocate memory for private data

[Sasha Levin]

From: Andrey Skvortsov <andrej.skvortzov@gmail.com>

[ Upstream commit 7a6d793e9ca8bc0c1d2f0aa0a02ec380d1124c74 ]

In some cases uart-base drivers may need to use priv data. For
example, to store information needed for devcoredump.

Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_h5.c     |  4 +++-
 drivers/bluetooth/hci_serdev.c |  9 +++++----
 drivers/bluetooth/hci_uart.h   | 12 +++++++++++-
 3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 71e748a9477e4..b66136348bd64 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -113,6 +113,7 @@ struct h5_vnd {
 	int (*suspend)(struct h5 *h5);
 	int (*resume)(struct h5 *h5);
 	const struct acpi_gpio_mapping *acpi_gpio_map;
+	int sizeof_priv;
 };
 
 struct h5_device_data {
@@ -863,7 +864,8 @@ static int h5_serdev_probe(struct serdev_device *serdev)
 	if (IS_ERR(h5->device_wake_gpio))
 		return PTR_ERR(h5->device_wake_gpio);
 
-	return hci_uart_register_device(&h5->serdev_hu, &h5p);
+	return hci_uart_register_device_priv(&h5->serdev_hu, &h5p,
+					     h5->vnd->sizeof_priv);
 }
 
 static void h5_serdev_remove(struct serdev_device *serdev)
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index f16fd79bc02b8..611a11fbb2f3a 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -300,8 +300,9 @@ static const struct serdev_device_ops hci_serdev_client_ops = {
 	.write_wakeup = hci_uart_write_wakeup,
 };
 
-int hci_uart_register_device(struct hci_uart *hu,
-			     const struct hci_uart_proto *p)
+int hci_uart_register_device_priv(struct hci_uart *hu,
+			     const struct hci_uart_proto *p,
+			     int sizeof_priv)
 {
 	int err;
 	struct hci_dev *hdev;
@@ -325,7 +326,7 @@ int hci_uart_register_device(struct hci_uart *hu,
 	set_bit(HCI_UART_PROTO_READY, &hu->flags);
 
 	/* Initialize and register HCI device */
-	hdev = hci_alloc_dev();
+	hdev = hci_alloc_dev_priv(sizeof_priv);
 	if (!hdev) {
 		BT_ERR("Can't allocate HCI device");
 		err = -ENOMEM;
@@ -394,7 +395,7 @@ int hci_uart_register_device(struct hci_uart *hu,
 	percpu_free_rwsem(&hu->proto_lock);
 	return err;
 }
-EXPORT_SYMBOL_GPL(hci_uart_register_device);
+EXPORT_SYMBOL_GPL(hci_uart_register_device_priv);
 
 void hci_uart_unregister_device(struct hci_uart *hu)
 {
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index fb4a2d0d8cc80..68c8c7e95d64d 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -97,7 +97,17 @@ struct hci_uart {
 
 int hci_uart_register_proto(const struct hci_uart_proto *p);
 int hci_uart_unregister_proto(const struct hci_uart_proto *p);
-int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+
+int hci_uart_register_device_priv(struct hci_uart *hu,
+				  const struct hci_uart_proto *p,
+				  int sizeof_priv);
+
+static inline int hci_uart_register_device(struct hci_uart *hu,
+					   const struct hci_uart_proto *p)
+{
+	return hci_uart_register_device_priv(hu, p, 0);
+}
+
 void hci_uart_unregister_device(struct hci_uart *hu);
 
 int hci_uart_tx_wakeup(struct hci_uart *hu);
-- 
2.43.0

[PATCH 6.7 352/713] Bluetooth: btrtl: fix out of bounds memory access

[Sasha Levin]

From: Andrey Skvortsov <andrej.skvortzov@gmail.com>

[ Upstream commit de4e88ec58c4202efd1f02eebb4939bbf6945358 ]

The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.

This commit adds memory allocation for hci_h5 case.

 ==================================================================
 BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
 Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76

 Hardware name: Pine64 PinePhone (1.2) (DT)
 Workqueue: hci0 hci_power_on [bluetooth]
 Call trace:
  dump_backtrace+0x9c/0x128
  show_stack+0x20/0x38
  dump_stack_lvl+0x48/0x60
  print_report+0xf8/0x5d8
  kasan_report+0x90/0xd0
  __asan_store8+0x9c/0xc0
  	 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Allocated by task 53:
  kasan_save_stack+0x3c/0x68
  kasan_save_track+0x20/0x40
  kasan_save_alloc_info+0x68/0x78
  __kasan_kmalloc+0xd4/0xd8
  __kmalloc+0x1b4/0x3b0
  hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
  hci_uart_register_device+0x118/0x4f8 [hci_uart]
  h5_serdev_probe+0xf4/0x178 [hci_uart]
  serdev_drv_probe+0x54/0xa0
  really_probe+0x254/0x588
  __driver_probe_device+0xc4/0x210
  driver_probe_device+0x64/0x160
  __driver_attach_async_helper+0x88/0x158
  async_run_entry_fn+0xd0/0x388
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x33c/0x960
  queue_work_on+0x98/0xc0
  hci_recv_frame+0xc8/0x1e8 [bluetooth]
  h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
  h5_rx_payload+0x98/0xb8 [hci_uart]
  h5_recv+0x158/0x3d8 [hci_uart]
  hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
  ttyport_receive_buf+0xac/0x178
  flush_to_ldisc+0x130/0x2c8
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Second to last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x788/0x960
  queue_work_on+0x98/0xc0
  __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
  __hci_cmd_sync+0x24/0x38 [bluetooth]
  btrtl_initialize+0x760/0x958 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20
 ==================================================================

Fixes: 5b355944b190 ("Bluetooth: btrtl: Add btrealtek data struct")
Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_h5.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index b66136348bd64..c0436881a533c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -1072,6 +1072,7 @@ static struct h5_vnd rtl_vnd = {
 	.suspend	= h5_btrtl_suspend,
 	.resume		= h5_btrtl_resume,
 	.acpi_gpio_map	= acpi_btrtl_gpios,
+	.sizeof_priv    = sizeof(struct btrealtek_data),
 };
 
 static const struct h5_device_data h5_data_rtl8822cs = {
-- 
2.43.0

[PATCH 6.7 353/713] Bluetooth: hci_core: Fix possible buffer overflow

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 81137162bfaa7278785b24c1fd2e9e74f082e8e4 ]

struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy.

Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 96707deef296b..85a91c438d721 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -908,7 +908,7 @@ int hci_get_dev_info(void __user *arg)
 	else
 		flags = hdev->flags;
 
-	strcpy(di.name, hdev->name);
+	strscpy(di.name, hdev->name, sizeof(di.name));
 	di.bdaddr   = hdev->bdaddr;
 	di.type     = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4);
 	di.flags    = flags;
-- 
2.43.0

[PATCH 6.7 354/713] Bluetooth: msft: Fix memory leak

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit a6e06258f4c31eba0fcd503e19828b5f8fe7b08b ]

Fix leaking buffer allocated to send MSFT_OP_LE_MONITOR_ADVERTISEMENT.

Fixes: 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/msft.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/msft.c b/net/bluetooth/msft.c
index 630e3023273b2..9612c5d1b13f6 100644
--- a/net/bluetooth/msft.c
+++ b/net/bluetooth/msft.c
@@ -875,6 +875,7 @@ static int msft_add_address_filter_sync(struct hci_dev *hdev, void *data)
 		remove = true;
 		goto done;
 	}
+
 	cp->sub_opcode           = MSFT_OP_LE_MONITOR_ADVERTISEMENT;
 	cp->rssi_high		 = address_filter->rssi_high;
 	cp->rssi_low		 = address_filter->rssi_low;
@@ -887,6 +888,8 @@ static int msft_add_address_filter_sync(struct hci_dev *hdev, void *data)
 
 	skb = __hci_cmd_sync(hdev, hdev->msft_opcode, size, cp,
 			     HCI_CMD_TIMEOUT);
+	kfree(cp);
+
 	if (IS_ERR(skb)) {
 		bt_dev_err(hdev, "Failed to enable address %pMR filter",
 			   &address_filter->bdaddr);
-- 
2.43.0

[PATCH 6.7 355/713] Bluetooth: btusb: Fix memory leak

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 79f4127a502c5905f04da1f20a7bbe07103fb77c ]

This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone
the skb and also make sure btmtk_process_coredump frees the skb passed
following the same logic.

Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btmtk.c |  4 +++-
 drivers/bluetooth/btusb.c | 10 ++++++----
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index aaabb732082cd..285418dbb43f5 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -372,8 +372,10 @@ int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
 	struct btmediatek_data *data = hci_get_priv(hdev);
 	int err;
 
-	if (!IS_ENABLED(CONFIG_DEV_COREDUMP))
+	if (!IS_ENABLED(CONFIG_DEV_COREDUMP)) {
+		kfree_skb(skb);
 		return 0;
+	}
 
 	switch (data->cd_info.state) {
 	case HCI_DEVCOREDUMP_IDLE:
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b8e9de887b5de..81ccb88c904a3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3271,7 +3271,6 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
-	struct sk_buff *skb_cd;
 
 	switch (handle) {
 	case 0xfc6f:		/* Firmware dump from device */
@@ -3284,9 +3283,12 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 		 * for backward compatibility, so we have to clone the packet
 		 * extraly for the in-kernel coredump support.
 		 */
-		skb_cd = skb_clone(skb, GFP_ATOMIC);
-		if (skb_cd)
-			btmtk_process_coredump(hdev, skb_cd);
+		if (IS_ENABLED(CONFIG_DEV_COREDUMP)) {
+			struct sk_buff *skb_cd = skb_clone(skb, GFP_ATOMIC);
+
+			if (skb_cd)
+				btmtk_process_coredump(hdev, skb_cd);
+		}
 
 		fallthrough;
 	case 0x05ff:		/* Firmware debug logging 1 */
-- 
2.43.0

[PATCH 6.7 356/713] Bluetooth: af_bluetooth: Fix deadlock

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit f7b94bdc1ec107c92262716b073b3e816d4784fb ]

Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:

INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
      Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
 <TASK>
 __schedule+0x37d/0xa00
 schedule+0x32/0xe0
 __lock_sock+0x68/0xa0
 ? __pfx_autoremove_wake_function+0x10/0x10
 lock_sock_nested+0x43/0x50
 l2cap_sock_recv_cb+0x21/0xa0
 l2cap_recv_frame+0x55b/0x30a0
 ? psi_task_switch+0xeb/0x270
 ? finish_task_switch.isra.0+0x93/0x2a0
 hci_rx_work+0x33a/0x3f0
 process_one_work+0x13a/0x2f0
 worker_thread+0x2f0/0x410
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xe0/0x110
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2c/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

Fixes: 2e07e8348ea4 ("Bluetooth: af_bluetooth: Fix Use-After-Free in bt_sock_recvmsg")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/af_bluetooth.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index b93464ac3517f..67604ccec2f42 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -309,14 +309,11 @@ int bt_sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	if (flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
-	lock_sock(sk);
-
 	skb = skb_recv_datagram(sk, flags, &err);
 	if (!skb) {
 		if (sk->sk_shutdown & RCV_SHUTDOWN)
 			err = 0;
 
-		release_sock(sk);
 		return err;
 	}
 
@@ -346,8 +343,6 @@ int bt_sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 
 	skb_free_datagram(sk, skb);
 
-	release_sock(sk);
-
 	if (flags & MSG_TRUNC)
 		copied = skblen;
 
@@ -570,10 +565,11 @@ int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		if (sk->sk_state == BT_LISTEN)
 			return -EINVAL;
 
-		lock_sock(sk);
+		spin_lock(&sk->sk_receive_queue.lock);
 		skb = skb_peek(&sk->sk_receive_queue);
 		amount = skb ? skb->len : 0;
-		release_sock(sk);
+		spin_unlock(&sk->sk_receive_queue.lock);
+
 		err = put_user(amount, (int __user *)arg);
 		break;
 
-- 
2.43.0

[PATCH 6.7 357/713] Bluetooth: fix use-after-free in accessing skb after sending it

[Sasha Levin]

From: Pauli Virtanen <pav@iki.fi>

[ Upstream commit 947ec0d002dce8577b655793dcc6fc78d67b7cb6 ]

hci_send_cmd_sync first sends skb and then tries to clone it.  However,
the driver may have already freed the skb at that point.

Fix by cloning the sent_cmd cloned just above, instead of the original.

Log:
================================================================
BUG: KASAN: slab-use-after-free in __copy_skb_header+0x1a/0x240
...
Call Trace: ..
 __skb_clone+0x59/0x2c0
 hci_cmd_work+0x3b3/0x3d0 [bluetooth]
 process_one_work+0x459/0x900
...
Allocated by task 129: ...
 __alloc_skb+0x1ae/0x220
 __hci_cmd_sync_sk+0x44c/0x7a0 [bluetooth]
 __hci_cmd_sync_status+0x24/0xb0 [bluetooth]
 set_cig_params_sync+0x778/0x7d0 [bluetooth]
...
Freed by task 0: ...
 kmem_cache_free+0x157/0x3c0
 __usb_hcd_giveback_urb+0x11e/0x1e0
 usb_giveback_urb_bh+0x1ad/0x2a0
 tasklet_action_common.isra.0+0x259/0x4a0
 __do_softirq+0x15b/0x5a7
================================================================

Fixes: 2615fd9a7c25 ("Bluetooth: hci_sync: Fix overwriting request callback")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 85a91c438d721..7d5334b529834 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4185,7 +4185,7 @@ static void hci_send_cmd_sync(struct hci_dev *hdev, struct sk_buff *skb)
 	if (hci_req_status_pend(hdev) &&
 	    !hci_dev_test_and_set_flag(hdev, HCI_CMD_PENDING)) {
 		kfree_skb(hdev->req_skb);
-		hdev->req_skb = skb_clone(skb, GFP_KERNEL);
+		hdev->req_skb = skb_clone(hdev->sent_cmd, GFP_KERNEL);
 	}
 
 	atomic_dec(&hdev->cmd_cnt);
-- 
2.43.0

[PATCH 6.7 358/713] sr9800: Add check for usbnet_get_endpoints

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ]

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/sr9800.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index 143bd4ab160df..57947a5590cca 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c
@@ -737,7 +737,9 @@ static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	data->eeprom_len = SR9800_EEPROM_LEN;
 
-	usbnet_get_endpoints(dev, intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
 
 	/* LED Setting Rule :
 	 * AABB:CCDD
-- 
2.43.0

[PATCH 6.7 359/713] s390/cache: prevent rebuild of shared_cpu_list

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit cb0cd4ee11142339f2d47eef6db274290b7a482d ]

With commit 36bbc5b4ffab ("cacheinfo: Allow early detection and population
of cache attributes") the shared cpu list for each cache level higher than
L1 is rebuilt even if the list already has been set up.

This is caused by the removal of the cpumask_empty() check within
cache_shared_cpu_map_setup().

However architectures can enforce that the shared cpu list is not rebuilt
by simply setting cpu_map_populated of the per cpu cache info structure to
true, which is also the fix for this problem.

Before:
$ cat /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list
0-7

After:
$ cat /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list
1

Fixes: 36bbc5b4ffab ("cacheinfo: Allow early detection and population of cache attributes")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/cache.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index 56254fa06f990..4f26690302209 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -166,5 +166,6 @@ int populate_cache_leaves(unsigned int cpu)
 			ci_leaf_init(this_leaf++, pvt, ctype, level, cpu);
 		}
 	}
+	this_cpu_ci->cpu_map_populated = true;
 	return 0;
 }
-- 
2.43.0

[PATCH 6.7 360/713] bpf: Fix DEVMAP_HASH overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 281d464a34f540de166cee74b723e97ac2515ec3 ]

The devmap code allocates a number hash buckets equal to the next power
of two of the max_entries value provided when creating the map. When
rounding up to the next power of two, the 32-bit variable storing the
number of buckets can overflow, and the code checks for overflow by
checking if the truncated 32-bit value is equal to 0. However, on 32-bit
arches the rounding up itself can overflow mid-way through, because it
ends up doing a left-shift of 32 bits on an unsigned long value. If the
size of an unsigned long is four bytes, this is undefined behaviour, so
there is no guarantee that we'll end up with a nice and tidy 0-value at
the end.

Syzbot managed to turn this into a crash on arm32 by creating a
DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it.
Fix this by moving the overflow check to before the rounding up
operation.

Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com
Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-2-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/devmap.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index a936c704d4e77..4e2cdbb5629f2 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -130,13 +130,14 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 	bpf_map_init_from_attr(&dtab->map, attr);
 
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
-		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
-
-		if (!dtab->n_buckets) /* Overflow check */
+		/* hash table size must be power of 2; roundup_pow_of_two() can
+		 * overflow into UB on 32-bit arches, so check that first
+		 */
+		if (dtab->map.max_entries > 1UL << 31)
 			return -EINVAL;
-	}
 
-	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
+		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
+
 		dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets,
 							   dtab->map.numa_node);
 		if (!dtab->dev_index_head)
-- 
2.43.0

[PATCH 6.7 361/713] bpf: Fix hashtab overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 6787d916c2cf9850c97a0a3f73e08c43e7d973b1 ]

The hashtab code relies on roundup_pow_of_two() to compute the number of
hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code. So apply the same
fix to hashtab, by moving the overflow check to before the roundup.

Fixes: daaf427c6ab3 ("bpf: fix arraymap NULL deref and missing overflow and zero size checks")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-3-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 5b9146fa825fd..85cd17ca38290 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -498,7 +498,13 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 							  num_possible_cpus());
 	}
 
-	/* hash table size must be power of 2 */
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	err = -E2BIG;
+	if (htab->map.max_entries > 1UL << 31)
+		goto free_htab;
+
 	htab->n_buckets = roundup_pow_of_two(htab->map.max_entries);
 
 	htab->elem_size = sizeof(struct htab_elem) +
@@ -508,10 +514,8 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 	else
 		htab->elem_size += round_up(htab->map.value_size, 8);
 
-	err = -E2BIG;
-	/* prevent zero size kmalloc and check for u32 overflow */
-	if (htab->n_buckets == 0 ||
-	    htab->n_buckets > U32_MAX / sizeof(struct bucket))
+	/* check for u32 overflow */
+	if (htab->n_buckets > U32_MAX / sizeof(struct bucket))
 		goto free_htab;
 
 	err = bpf_map_init_elem_count(&htab->map);
-- 
2.43.0

[PATCH 6.7 362/713] bpf: Fix stackmap overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 7a4b21250bf79eef26543d35bd390448646c536b ]

The stackmap code relies on roundup_pow_of_two() to compute the number
of hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code.

The commit in the fixes tag actually attempted to fix this, but the fix
did not account for the UB, so the fix only works on CPUs where an
overflow does result in a neat truncation to zero, which is not
guaranteed. Checking the value before rounding does not have this
problem.

Fixes: 6183f4d3a0a2 ("bpf: Check for integer overflow when using roundup_pow_of_two()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-ID: <20240307120340.99577-4-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index dff7ba5397015..c99f8e5234ac4 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -91,11 +91,14 @@ static struct bpf_map *stack_map_alloc(union bpf_attr *attr)
 	} else if (value_size / 8 > sysctl_perf_event_max_stack)
 		return ERR_PTR(-EINVAL);
 
-	/* hash table size must be power of 2 */
-	n_buckets = roundup_pow_of_two(attr->max_entries);
-	if (!n_buckets)
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	if (attr->max_entries > 1UL << 31)
 		return ERR_PTR(-E2BIG);
 
+	n_buckets = roundup_pow_of_two(attr->max_entries);
+
 	cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
 	smap = bpf_map_area_alloc(cost, bpf_map_attr_numa_node(attr));
 	if (!smap)
-- 
2.43.0

[PATCH 6.7 363/713] net: dsa: microchip: make sure drive strength configuration is not lost by soft reset

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit e3fb8e8ba72b053d05ca2602acdd6b869f9f296f ]

This driver has two separate reset sequence in different places:
- gpio/HW reset on start of ksz_switch_register()
- SW reset on start of ksz_setup()

The second one will overwrite drive strength configuration made in the
ksz_switch_register().

To fix it, move ksz_parse_drive_strength() from ksz_switch_register() to
ksz_setup().

Fixes: d67d7247f641 ("net: dsa: microchip: Add drive strength configuration")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240304135612.814404-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/microchip/ksz_common.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index ff4b39601c937..d5d7e48b7b928 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2176,6 +2176,8 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p)
 	return ksz_irq_common_setup(dev, pirq);
 }
 
+static int ksz_parse_drive_strength(struct ksz_device *dev);
+
 static int ksz_setup(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
@@ -2197,6 +2199,10 @@ static int ksz_setup(struct dsa_switch *ds)
 		return ret;
 	}
 
+	ret = ksz_parse_drive_strength(dev);
+	if (ret)
+		return ret;
+
 	/* set broadcast storm protection 10% rate */
 	regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
 			   BROADCAST_STORM_RATE,
@@ -4236,10 +4242,6 @@ int ksz_switch_register(struct ksz_device *dev)
 	for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
 		dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
 	if (dev->dev->of_node) {
-		ret = ksz_parse_drive_strength(dev);
-		if (ret)
-			return ret;
-
 		ret = of_get_phy_mode(dev->dev->of_node, &interface);
 		if (ret == 0)
 			dev->compat_interface = interface;
-- 
2.43.0

[PATCH 6.7 364/713] dpll: spec: use proper enum for pin capabilities attribute

[Sasha Levin]

From: Jiri Pirko <jiri@nvidia.com>

[ Upstream commit 5c497a64820ef9f10962a9c37607df45d6395fa5 ]

The enum is defined, however the pin capabilities attribute does
refer to it. Add this missing enum field.

This fixes ynl cli output:

Example current output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': 4,
 ...
Example new output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': {'state-can-change'},
 ...

Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240306120739.1447621-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/netlink/specs/dpll.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
index 2b4c4bcd83615..5b25ad589e3d0 100644
--- a/Documentation/netlink/specs/dpll.yaml
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -274,6 +274,7 @@ attribute-sets:
       -
         name: capabilities
         type: u32
+        enum: pin-capabilities
       -
         name: parent-device
         type: nest
-- 
2.43.0

[PATCH 6.7 365/713] iommu: Fix compilation without CONFIG_IOMMU_INTEL

[Sasha Levin]

From: Bert Karwatzki <spasswolf@web.de>

[ Upstream commit 70bad345e622c23bb530016925c936ab04a646ac ]

When the kernel is comiled with CONFIG_IRQ_REMAP=y but without
CONFIG_IOMMU_INTEL compilation fails since commit def054b01a8678 with an
undefined reference to device_rbtree_find(). This patch makes sure that
intel specific code is only compiled with CONFIG_IOMMU_INTEL=y.

Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 80a9b50c0b9e ("iommu/vt-d: Improve ITE fault handling if target  device isn't present")
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240307194419.15801-1-spasswolf@web.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/Kconfig         | 2 +-
 drivers/iommu/intel/Makefile  | 2 ++
 drivers/iommu/irq_remapping.c | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 7673bb82945b6..a66f7df7a2b0b 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -195,7 +195,7 @@ source "drivers/iommu/iommufd/Kconfig"
 config IRQ_REMAP
 	bool "Support for Interrupt Remapping"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
-	select DMAR_TABLE
+	select DMAR_TABLE if INTEL_IOMMU
 	help
 	  Supports Interrupt remapping for IO-APIC and MSI devices.
 	  To use x2apic mode in the CPU's which support x2APIC enhancements or
diff --git a/drivers/iommu/intel/Makefile b/drivers/iommu/intel/Makefile
index 5dabf081a7793..5402b699a1229 100644
--- a/drivers/iommu/intel/Makefile
+++ b/drivers/iommu/intel/Makefile
@@ -5,5 +5,7 @@ obj-$(CONFIG_DMAR_TABLE) += trace.o cap_audit.o
 obj-$(CONFIG_DMAR_PERF) += perf.o
 obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += debugfs.o
 obj-$(CONFIG_INTEL_IOMMU_SVM) += svm.o
+ifdef CONFIG_INTEL_IOMMU
 obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o
+endif
 obj-$(CONFIG_INTEL_IOMMU_PERF_EVENTS) += perfmon.o
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 83314b9d8f38b..ee59647c20501 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -99,7 +99,8 @@ int __init irq_remapping_prepare(void)
 	if (disable_irq_remap)
 		return -ENOSYS;
 
-	if (intel_irq_remap_ops.prepare() == 0)
+	if (IS_ENABLED(CONFIG_INTEL_IOMMU) &&
+	    intel_irq_remap_ops.prepare() == 0)
 		remap_ops = &intel_irq_remap_ops;
 	else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
 		 amd_iommu_irq_ops.prepare() == 0)
-- 
2.43.0

[PATCH 6.7 366/713] ipv6: fib6_rules: flush route cache when rule is changed

[Sasha Levin]

From: Shiming Cheng <shiming.cheng@mediatek.com>

[ Upstream commit c4386ab4f6c600f75fdfd21143f89bac3e625d0d ]

When rule policy is changed, ipv6 socket cache is not refreshed.
The sock's skb still uses a outdated route cache and was sent to
a wrong interface.

To avoid this error we should update fib node's version when
rule is changed. Then skb's route will be reroute checked as
route cache version is already different with fib node version.
The route cache is refreshed to match the latest rule.

Fixes: 101367c2f8c4 ("[IPV6]: Policy Routing Rules")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/fib6_rules.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 7c20038330104..be52b18e08a6b 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -449,6 +449,11 @@ static size_t fib6_rule_nlmsg_payload(struct fib_rule *rule)
 	       + nla_total_size(16); /* src */
 }
 
+static void fib6_rule_flush_cache(struct fib_rules_ops *ops)
+{
+	rt_genid_bump_ipv6(ops->fro_net);
+}
+
 static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.family			= AF_INET6,
 	.rule_size		= sizeof(struct fib6_rule),
@@ -461,6 +466,7 @@ static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.compare		= fib6_rule_compare,
 	.fill			= fib6_rule_fill,
 	.nlmsg_payload		= fib6_rule_nlmsg_payload,
+	.flush_cache		= fib6_rule_flush_cache,
 	.nlgroup		= RTNLGRP_IPV6_RULE,
 	.owner			= THIS_MODULE,
 	.fro_net		= &init_net,
-- 
2.43.0

[PATCH 6.7 367/713] net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit b0ec2abf98267f14d032102551581c833b0659d3 ]

Apply the same fix than ones found in :

8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

syzbot reported:
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
 BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
 BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
  __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
  INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
  __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389
  ipgre_rcv net/ipv4/ip_gre.c:411 [inline]
  gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447
  gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  netif_receive_skb_internal net/core/dev.c:5734 [inline]
  netif_receive_skb+0x58/0x660 net/core/dev.c:5793
  tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556
  tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
  call_write_iter include/linux/fs.h:2087 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb6b/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
  alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133
  alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204
  skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909
  tun_build_skb drivers/net/tun.c:1686 [inline]
  tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
  call_write_iter include/linux/fs.h:2087 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb6b/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_tunnel.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 2d29fce7c5606..b1b6dcf2161fb 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -378,7 +378,7 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		  bool log_ecn_error)
 {
 	const struct iphdr *iph = ip_hdr(skb);
-	int err;
+	int nh, err;
 
 #ifdef CONFIG_NET_IPGRE_BROADCAST
 	if (ipv4_is_multicast(iph->daddr)) {
@@ -404,8 +404,21 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		tunnel->i_seqno = ntohl(tpi->seq) + 1;
 	}
 
+	/* Save offset of outer header relative to skb->head,
+	 * because we are going to reset the network header to the inner header
+	 * and might change skb->head.
+	 */
+	nh = skb_network_header(skb) - skb->head;
+
 	skb_set_network_header(skb, (tunnel->dev->type == ARPHRD_ETHER) ? ETH_HLEN : 0);
 
+	if (!pskb_inet_may_pull(skb)) {
+		DEV_STATS_INC(tunnel->dev, rx_length_errors);
+		DEV_STATS_INC(tunnel->dev, rx_errors);
+		goto drop;
+	}
+	iph = (struct iphdr *)(skb->head + nh);
+
 	err = IP_ECN_decapsulate(iph, skb);
 	if (unlikely(err)) {
 		if (log_ecn_error)
-- 
2.43.0

[PATCH 6.7 368/713] net: phy: fix phy_get_internal_delay accessing an empty array

[Sasha Levin]

From: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com>

[ Upstream commit 4469c0c5b14a0919f5965c7ceac96b523eb57b79 ]

The phy_get_internal_delay function could try to access to an empty
array in the case that the driver is calling phy_get_internal_delay
without defining delay_values and rx-internal-delay-ps or
tx-internal-delay-ps is defined to 0 in the device-tree.
This will lead to "unable to handle kernel NULL pointer dereference at
virtual address 0". To avoid this kernel oops, the test should be delay
>= 0. As there is already delay < 0 test just before, the test could
only be size == 0.

Fixes: 92252eec913b ("net: phy: Add a helper to return the index for of the internal delay")
Co-developed-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a42df2c1bd043..bbc459f97b7b0 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2954,7 +2954,7 @@ s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
 	if (delay < 0)
 		return delay;
 
-	if (delay && size == 0)
+	if (size == 0)
 		return delay;
 
 	if (delay < delay_values[0] || delay > delay_values[size - 1]) {
-- 
2.43.0

[PATCH 6.7 369/713] dpll: fix dpll_xa_ref_*_del() for multiple registrations

[Sasha Levin]

From: Jiri Pirko <jiri@nvidia.com>

[ Upstream commit b446631f355ece73b13c311dd712c47381a23172 ]

Currently, if there are multiple registrations of the same pin on the
same dpll device, following warnings are observed:
WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:143 dpll_xa_ref_pin_del.isra.0+0x21e/0x230
WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:223 __dpll_pin_unregister+0x2b3/0x2c0

The problem is, that in both dpll_xa_ref_dpll_del() and
dpll_xa_ref_pin_del() registration is only removed from list in case the
reference count drops to zero. That is wrong, the registration has to
be removed always.

To fix this, remove the registration from the list and free
it unconditionally, instead of doing it only when the ref reference
counter reaches zero.

Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dpll/dpll_core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dpll/dpll_core.c b/drivers/dpll/dpll_core.c
index f8fbf03942888..e72ebdf621509 100644
--- a/drivers/dpll/dpll_core.c
+++ b/drivers/dpll/dpll_core.c
@@ -128,9 +128,9 @@ static int dpll_xa_ref_pin_del(struct xarray *xa_pins, struct dpll_pin *pin,
 		reg = dpll_pin_registration_find(ref, ops, priv);
 		if (WARN_ON(!reg))
 			return -EINVAL;
+		list_del(&reg->list);
+		kfree(reg);
 		if (refcount_dec_and_test(&ref->refcount)) {
-			list_del(&reg->list);
-			kfree(reg);
 			xa_erase(xa_pins, i);
 			WARN_ON(!list_empty(&ref->registration_list));
 			kfree(ref);
@@ -208,9 +208,9 @@ dpll_xa_ref_dpll_del(struct xarray *xa_dplls, struct dpll_device *dpll,
 		reg = dpll_pin_registration_find(ref, ops, priv);
 		if (WARN_ON(!reg))
 			return;
+		list_del(&reg->list);
+		kfree(reg);
 		if (refcount_dec_and_test(&ref->refcount)) {
-			list_del(&reg->list);
-			kfree(reg);
 			xa_erase(xa_dplls, i);
 			WARN_ON(!list_empty(&ref->registration_list));
 			kfree(ref);
-- 
2.43.0

[PATCH 6.7 370/713] net: hns3: fix wrong judgment condition issue

[Sasha Levin]

From: Jijie Shao <shaojijie@huawei.com>

[ Upstream commit 07a1d6dc90baedcf5d713e2b003b9e387130ee30 ]

In hns3_dcbnl_ieee_delapp, should check ieee_delapp not ieee_setapp.
This path fix the wrong judgment.

Fixes: 0ba22bcb222d ("net: hns3: add support config dscp map to tc")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c b/drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c
index 3b6dbf158b98d..f72dc0cee30e5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c
@@ -76,7 +76,7 @@ static int hns3_dcbnl_ieee_delapp(struct net_device *ndev, struct dcb_app *app)
 	if (hns3_nic_resetting(ndev))
 		return -EBUSY;
 
-	if (h->kinfo.dcb_ops->ieee_setapp)
+	if (h->kinfo.dcb_ops->ieee_delapp)
 		return h->kinfo.dcb_ops->ieee_delapp(h, app);
 
 	return -EOPNOTSUPP;
-- 
2.43.0

[PATCH 6.7 371/713] net: hns3: fix kernel crash when 1588 is received on HIP08 devices

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 0fbcf2366ba9888cf02eda23e35fde7f7fcc07c3 ]

The HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL, but the hardware can receive 1588 messages,
and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the
access of hdev->ptp->flags will cause a kernel crash:

[ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
[ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge]
[ 5889.279101] sp : ffff800012c3bc50
[ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040
[ 5889.289927] x27: ffff800009116484 x26: 0000000080007500
[ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000
[ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000
[ 5889.309134] x21: 0000000000000000 x20: ffff204004220080
[ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000
[ 5889.321897] x17: 0000000000000000 x16: 0000000000000000
[ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000
[ 5889.334617] x13: 0000000000000000 x12: 00000000010011df
[ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000
[ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d
[ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480
[ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000
[ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000
[ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080
[ 5889.378857] Call trace:
[ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3]
[ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3]
[ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3]
[ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3]
[ 5889.411084] napi_poll+0xcc/0x264
[ 5889.415329] net_rx_action+0xd4/0x21c
[ 5889.419911] __do_softirq+0x130/0x358
[ 5889.424484] irq_exit+0x134/0x154
[ 5889.428700] __handle_domain_irq+0x88/0xf0
[ 5889.433684] gic_handle_irq+0x78/0x2c0
[ 5889.438319] el1_irq+0xb8/0x140
[ 5889.442354] arch_cpu_idle+0x18/0x40
[ 5889.446816] default_idle_call+0x5c/0x1c0
[ 5889.451714] cpuidle_idle_call+0x174/0x1b0
[ 5889.456692] do_idle+0xc8/0x160
[ 5889.460717] cpu_startup_entry+0x30/0xfc
[ 5889.465523] secondary_start_kernel+0x158/0x1ec
[ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80)
[ 5889.477950] SMP: stopping secondary CPUs
[ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95
[ 5890.522951] Starting crashdump kernel...

Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
index 80a2a0073d97a..507d7ce26d831 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
@@ -108,7 +108,7 @@ void hclge_ptp_get_rx_hwts(struct hnae3_handle *handle, struct sk_buff *skb,
 	u64 ns = nsec;
 	u32 sec_h;
 
-	if (!test_bit(HCLGE_PTP_FLAG_RX_EN, &hdev->ptp->flags))
+	if (!hdev->ptp || !test_bit(HCLGE_PTP_FLAG_RX_EN, &hdev->ptp->flags))
 		return;
 
 	/* Since the BD does not have enough space for the higher 16 bits of
-- 
2.43.0

[PATCH 6.7 372/713] net: hns3: fix port duplex configure error in IMP reset

[Sasha Levin]

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 11d80f79dd9f871a52feba4bf24b5ac39f448eb7 ]

Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool,  so it may cause the user
configuration dropped after reset.

To fix it, don't change the duplex mode when resetting.

Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 5ea9e59569eff..609d3799d7738 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2890,7 +2890,10 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 	int ret;
 
 	hdev->support_sfp_query = true;
-	hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
+	if (!test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+		hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
 	ret = hclge_cfg_mac_speed_dup_hw(hdev, hdev->hw.mac.speed,
 					 hdev->hw.mac.duplex, hdev->hw.mac.lane_num);
 	if (ret)
-- 
2.43.0

[PATCH 6.7 373/713] Bluetooth: Fix eir name length

[Sasha Levin]

From: Frédéric Danis <frederic.danis@collabora.com>

[ Upstream commit 2ab3e8d67fc1d4a7638b769cf83023ec209fc0a9 ]

According to Section 1.2 of Core Specification Supplement Part A the
complete or short name strings are defined as utf8s, which should not
include the trailing NULL for variable length array as defined in Core
Specification Vol1 Part E Section 2.9.3.

Removing the trailing NULL allows PTS to retrieve the random address based
on device name, e.g. for SM/PER/KDU/BV-02-C, SM/PER/KDU/BV-08-C or
GAP/BROB/BCST/BV-03-C.

Fixes: f61851f64b17 ("Bluetooth: Fix append max 11 bytes of name to scan rsp data")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/eir.c  | 29 +++++++----------------------
 net/bluetooth/mgmt.c |  2 +-
 2 files changed, 8 insertions(+), 23 deletions(-)

diff --git a/net/bluetooth/eir.c b/net/bluetooth/eir.c
index 9214189279e80..1bc51e2b05a34 100644
--- a/net/bluetooth/eir.c
+++ b/net/bluetooth/eir.c
@@ -13,48 +13,33 @@
 
 #define PNP_INFO_SVCLASS_ID		0x1200
 
-static u8 eir_append_name(u8 *eir, u16 eir_len, u8 type, u8 *data, u8 data_len)
-{
-	u8 name[HCI_MAX_SHORT_NAME_LENGTH + 1];
-
-	/* If data is already NULL terminated just pass it directly */
-	if (data[data_len - 1] == '\0')
-		return eir_append_data(eir, eir_len, type, data, data_len);
-
-	memcpy(name, data, HCI_MAX_SHORT_NAME_LENGTH);
-	name[HCI_MAX_SHORT_NAME_LENGTH] = '\0';
-
-	return eir_append_data(eir, eir_len, type, name, sizeof(name));
-}
-
 u8 eir_append_local_name(struct hci_dev *hdev, u8 *ptr, u8 ad_len)
 {
 	size_t short_len;
 	size_t complete_len;
 
-	/* no space left for name (+ NULL + type + len) */
-	if ((max_adv_len(hdev) - ad_len) < HCI_MAX_SHORT_NAME_LENGTH + 3)
+	/* no space left for name (+ type + len) */
+	if ((max_adv_len(hdev) - ad_len) < HCI_MAX_SHORT_NAME_LENGTH + 2)
 		return ad_len;
 
 	/* use complete name if present and fits */
 	complete_len = strnlen(hdev->dev_name, sizeof(hdev->dev_name));
 	if (complete_len && complete_len <= HCI_MAX_SHORT_NAME_LENGTH)
-		return eir_append_name(ptr, ad_len, EIR_NAME_COMPLETE,
-				       hdev->dev_name, complete_len + 1);
+		return eir_append_data(ptr, ad_len, EIR_NAME_COMPLETE,
+				       hdev->dev_name, complete_len);
 
 	/* use short name if present */
 	short_len = strnlen(hdev->short_name, sizeof(hdev->short_name));
 	if (short_len)
-		return eir_append_name(ptr, ad_len, EIR_NAME_SHORT,
+		return eir_append_data(ptr, ad_len, EIR_NAME_SHORT,
 				       hdev->short_name,
-				       short_len == HCI_MAX_SHORT_NAME_LENGTH ?
-				       short_len : short_len + 1);
+				       short_len);
 
 	/* use shortened full name if present, we already know that name
 	 * is longer then HCI_MAX_SHORT_NAME_LENGTH
 	 */
 	if (complete_len)
-		return eir_append_name(ptr, ad_len, EIR_NAME_SHORT,
+		return eir_append_data(ptr, ad_len, EIR_NAME_SHORT,
 				       hdev->dev_name,
 				       HCI_MAX_SHORT_NAME_LENGTH);
 
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 2ffda2ffdbda8..92fd3786bbdff 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -8400,7 +8400,7 @@ static int read_adv_features(struct sock *sk, struct hci_dev *hdev,
 
 static u8 calculate_name_len(struct hci_dev *hdev)
 {
-	u8 buf[HCI_MAX_SHORT_NAME_LENGTH + 3];
+	u8 buf[HCI_MAX_SHORT_NAME_LENGTH + 2]; /* len + type + name */
 
 	return eir_append_local_name(hdev, buf, 0);
 }
-- 
2.43.0

[PATCH 6.7 374/713] net: phy: dp83822: Fix RGMII TX delay configuration

[Sasha Levin]

From: Tim Pambor <tp@osasysteme.de>

[ Upstream commit c8a5c731fd1223090af57da33838c671a7fc6a78 ]

The logic for enabling the TX clock shift is inverse of enabling the RX
clock shift. The TX clock shift is disabled when DP83822_TX_CLK_SHIFT is
set. Correct the current behavior and always write the delay configuration
to ensure consistent delay settings regardless of bootloader configuration.

Reference: https://www.ti.com/lit/ds/symlink/dp83822i.pdf p. 69

Fixes: 8095295292b5 ("net: phy: DP83822: Add setting the fixed internal delay")
Signed-off-by: Tim Pambor <tp@osasysteme.de>
Link: https://lore.kernel.org/r/20240305110608.104072-1-tp@osasysteme.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83822.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index b7cb71817780c..29e1cbea6dc0c 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -380,7 +380,7 @@ static int dp83822_config_init(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
-	int rgmii_delay;
+	int rgmii_delay = 0;
 	s32 rx_int_delay;
 	s32 tx_int_delay;
 	int err = 0;
@@ -390,30 +390,33 @@ static int dp83822_config_init(struct phy_device *phydev)
 		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      true);
 
-		if (rx_int_delay <= 0)
-			rgmii_delay = 0;
-		else
-			rgmii_delay = DP83822_RX_CLK_SHIFT;
+		/* Set DP83822_RX_CLK_SHIFT to enable rx clk internal delay */
+		if (rx_int_delay > 0)
+			rgmii_delay |= DP83822_RX_CLK_SHIFT;
 
 		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      false);
+
+		/* Set DP83822_TX_CLK_SHIFT to disable tx clk internal delay */
 		if (tx_int_delay <= 0)
-			rgmii_delay &= ~DP83822_TX_CLK_SHIFT;
-		else
 			rgmii_delay |= DP83822_TX_CLK_SHIFT;
 
-		if (rgmii_delay) {
-			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
-					       MII_DP83822_RCSR, rgmii_delay);
-			if (err)
-				return err;
-		}
+		err = phy_modify_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+				     DP83822_RX_CLK_SHIFT | DP83822_TX_CLK_SHIFT, rgmii_delay);
+		if (err)
+			return err;
+
+		err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+				       MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
 
-		phy_set_bits_mmd(phydev, DP83822_DEVADDR,
-					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+		if (err)
+			return err;
 	} else {
-		phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
-					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+		err = phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
+					 MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+
+		if (err)
+			return err;
 	}
 
 	if (dp83822->fx_enabled) {
-- 
2.43.0

[PATCH 6.7 375/713] erofs: fix handling kern_mount() failure

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 2c88c16dc20e88dd54d2f6f4d01ae1dce6cc9654 ]

if you have a variable that holds NULL or  a pointer to live struct mount,
do not shove ERR_PTR() into it - not if you later treat "not NULL" as
"holds a pointer to object".

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 0f28be64d132 ("erofs: fix lockdep false positives on initializing erofs_pseudo_mnt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/fscache.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/erofs/fscache.c b/fs/erofs/fscache.c
index 87ff35bff8d5b..1052f75d1dfae 100644
--- a/fs/erofs/fscache.c
+++ b/fs/erofs/fscache.c
@@ -381,11 +381,12 @@ static int erofs_fscache_init_domain(struct super_block *sb)
 		goto out;
 
 	if (!erofs_pseudo_mnt) {
-		erofs_pseudo_mnt = kern_mount(&erofs_fs_type);
-		if (IS_ERR(erofs_pseudo_mnt)) {
-			err = PTR_ERR(erofs_pseudo_mnt);
+		struct vfsmount *mnt = kern_mount(&erofs_fs_type);
+		if (IS_ERR(mnt)) {
+			err = PTR_ERR(mnt);
 			goto out;
 		}
+		erofs_pseudo_mnt = mnt;
 	}
 
 	domain->volume = sbi->volume;
-- 
2.43.0

[PATCH 6.7 376/713] erofs: fix lockdep false positives on initializing erofs_pseudo_mnt

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 0f28be64d132aaf95d06375c8002ad9ecea69d71 ]

Lockdep reported the following issue when mounting erofs with a domain_id:

============================================
WARNING: possible recursive locking detected
6.8.0-rc7-xfstests #521 Not tainted
--------------------------------------------
mount/396 is trying to acquire lock:
ffff907a8aaaa0e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
						at: alloc_super+0xe3/0x3d0

but task is already holding lock:
ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
						at: alloc_super+0xe3/0x3d0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&type->s_umount_key#50/1);
  lock(&type->s_umount_key#50/1);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by mount/396:
 #0: ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
			at: alloc_super+0xe3/0x3d0
 #1: ffffffffc00e6f28 (erofs_domain_list_lock){+.+.}-{3:3},
			at: erofs_fscache_register_fs+0x3d/0x270 [erofs]

stack backtrace:
CPU: 1 PID: 396 Comm: mount Not tainted 6.8.0-rc7-xfstests #521
Call Trace:
 <TASK>
 dump_stack_lvl+0x64/0xb0
 validate_chain+0x5c4/0xa00
 __lock_acquire+0x6a9/0xd50
 lock_acquire+0xcd/0x2b0
 down_write_nested+0x45/0xd0
 alloc_super+0xe3/0x3d0
 sget_fc+0x62/0x2f0
 vfs_get_super+0x21/0x90
 vfs_get_tree+0x2c/0xf0
 fc_mount+0x12/0x40
 vfs_kern_mount.part.0+0x75/0x90
 kern_mount+0x24/0x40
 erofs_fscache_register_fs+0x1ef/0x270 [erofs]
 erofs_fc_fill_super+0x213/0x380 [erofs]

This is because the file_system_type of both erofs and the pseudo-mount
point of domain_id is erofs_fs_type, so two successive calls to
alloc_super() are considered to be using the same lock and trigger the
warning above.

Therefore add a nodev file_system_type called erofs_anon_fs_type in
fscache.c to silence this complaint. Because kern_mount() takes a
pointer to struct file_system_type, not its (string) name. So we don't
need to call register_filesystem(). In addition, call init_pseudo() in
erofs_anon_init_fs_context() as suggested by Al Viro, so that we can
remove erofs_fc_fill_pseudo_super(), erofs_fc_anon_get_tree(), and
erofs_anon_context_ops.

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a9849560c55e ("erofs: introduce a pseudo mnt to manage shared cookies")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240307101018.2021925-1-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/erofs/fscache.c  | 15 ++++++++++++++-
 fs/erofs/internal.h |  1 -
 fs/erofs/super.c    | 30 +-----------------------------
 3 files changed, 15 insertions(+), 31 deletions(-)

diff --git a/fs/erofs/fscache.c b/fs/erofs/fscache.c
index 1052f75d1dfae..afc37c9029ce7 100644
--- a/fs/erofs/fscache.c
+++ b/fs/erofs/fscache.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2022, Alibaba Cloud
  * Copyright (C) 2022, Bytedance Inc. All rights reserved.
  */
+#include <linux/pseudo_fs.h>
 #include <linux/fscache.h>
 #include "internal.h"
 
@@ -12,6 +13,18 @@ static LIST_HEAD(erofs_domain_list);
 static LIST_HEAD(erofs_domain_cookies_list);
 static struct vfsmount *erofs_pseudo_mnt;
 
+static int erofs_anon_init_fs_context(struct fs_context *fc)
+{
+	return init_pseudo(fc, EROFS_SUPER_MAGIC) ? 0 : -ENOMEM;
+}
+
+static struct file_system_type erofs_anon_fs_type = {
+	.owner		= THIS_MODULE,
+	.name           = "pseudo_erofs",
+	.init_fs_context = erofs_anon_init_fs_context,
+	.kill_sb        = kill_anon_super,
+};
+
 struct erofs_fscache_request {
 	struct erofs_fscache_request *primary;
 	struct netfs_cache_resources cache_resources;
@@ -381,7 +394,7 @@ static int erofs_fscache_init_domain(struct super_block *sb)
 		goto out;
 
 	if (!erofs_pseudo_mnt) {
-		struct vfsmount *mnt = kern_mount(&erofs_fs_type);
+		struct vfsmount *mnt = kern_mount(&erofs_anon_fs_type);
 		if (IS_ERR(mnt)) {
 			err = PTR_ERR(mnt);
 			goto out;
diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h
index b0409badb0172..410f5af623540 100644
--- a/fs/erofs/internal.h
+++ b/fs/erofs/internal.h
@@ -385,7 +385,6 @@ struct erofs_map_dev {
 	unsigned int m_deviceid;
 };
 
-extern struct file_system_type erofs_fs_type;
 extern const struct super_operations erofs_sops;
 
 extern const struct address_space_operations erofs_raw_access_aops;
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index 3789d62245136..8a82d5cec16da 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -573,13 +573,6 @@ static const struct export_operations erofs_export_ops = {
 	.get_parent = erofs_get_parent,
 };
 
-static int erofs_fc_fill_pseudo_super(struct super_block *sb, struct fs_context *fc)
-{
-	static const struct tree_descr empty_descr = {""};
-
-	return simple_fill_super(sb, EROFS_SUPER_MAGIC, &empty_descr);
-}
-
 static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc)
 {
 	struct inode *inode;
@@ -706,11 +699,6 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc)
 	return 0;
 }
 
-static int erofs_fc_anon_get_tree(struct fs_context *fc)
-{
-	return get_tree_nodev(fc, erofs_fc_fill_pseudo_super);
-}
-
 static int erofs_fc_get_tree(struct fs_context *fc)
 {
 	struct erofs_fs_context *ctx = fc->fs_private;
@@ -783,20 +771,10 @@ static const struct fs_context_operations erofs_context_ops = {
 	.free		= erofs_fc_free,
 };
 
-static const struct fs_context_operations erofs_anon_context_ops = {
-	.get_tree       = erofs_fc_anon_get_tree,
-};
-
 static int erofs_init_fs_context(struct fs_context *fc)
 {
 	struct erofs_fs_context *ctx;
 
-	/* pseudo mount for anon inodes */
-	if (fc->sb_flags & SB_KERNMOUNT) {
-		fc->ops = &erofs_anon_context_ops;
-		return 0;
-	}
-
 	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
@@ -818,12 +796,6 @@ static void erofs_kill_sb(struct super_block *sb)
 {
 	struct erofs_sb_info *sbi;
 
-	/* pseudo mount for anon inodes */
-	if (sb->s_flags & SB_KERNMOUNT) {
-		kill_anon_super(sb);
-		return;
-	}
-
 	if (erofs_is_fscache_mode(sb))
 		kill_anon_super(sb);
 	else
@@ -862,7 +834,7 @@ static void erofs_put_super(struct super_block *sb)
 	erofs_fscache_unregister_fs(sb);
 }
 
-struct file_system_type erofs_fs_type = {
+static struct file_system_type erofs_fs_type = {
 	.owner          = THIS_MODULE,
 	.name           = "erofs",
 	.init_fs_context = erofs_init_fs_context,
-- 
2.43.0

[PATCH 6.7 377/713] OPP: debugfs: Fix warning around icc_get_name()

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 28330ceb953e39880ea77da4895bb902a1244860 ]

If the kernel isn't built with interconnect support, icc_get_name()
returns NULL and we get following warning:

drivers/opp/debugfs.c: In function 'bw_name_read':
drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=]
         i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));

Fix it.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Fixes: 0430b1d5704b0 ("opp: Expose bandwidth information via debugfs")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/debugfs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/opp/debugfs.c b/drivers/opp/debugfs.c
index ec030b19164a3..f157fb50be50c 100644
--- a/drivers/opp/debugfs.c
+++ b/drivers/opp/debugfs.c
@@ -37,10 +37,12 @@ static ssize_t bw_name_read(struct file *fp, char __user *userbuf,
 			    size_t count, loff_t *ppos)
 {
 	struct icc_path *path = fp->private_data;
+	const char *name = icc_get_name(path);
 	char buf[64];
-	int i;
+	int i = 0;
 
-	i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));
+	if (name)
+		i = scnprintf(buf, sizeof(buf), "%.62s\n", name);
 
 	return simple_read_from_buffer(userbuf, count, ppos, buf, i);
 }
-- 
2.43.0

[PATCH 6.7 378/713] tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 716edc9706deb3bb2ff56e2eeb83559cea8f22db ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index b30ef770a6cca..0d03d48702a4e 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -4011,11 +4011,11 @@ int do_tcp_getsockopt(struct sock *sk, int level,
 	if (copy_from_sockptr(&len, optlen, sizeof(int)))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case TCP_MAXSEG:
 		val = tp->mss_cache;
-- 
2.43.0

[PATCH 6.7 379/713] ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 5c3be3e0eb44b7f978bb6cbb20ad956adb93f736 ]

The 'olr' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'olr' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipmr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index e49242706b5f5..66eade3fb629f 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1603,9 +1603,11 @@ int ip_mroute_getsockopt(struct sock *sk, int optname, sockptr_t optval,
 
 	if (copy_from_sockptr(&olr, optlen, sizeof(int)))
 		return -EFAULT;
-	olr = min_t(unsigned int, olr, sizeof(int));
 	if (olr < 0)
 		return -EINVAL;
+
+	olr = min_t(unsigned int, olr, sizeof(int));
+
 	if (copy_to_sockptr(optlen, &olr, sizeof(int)))
 		return -EFAULT;
 	if (copy_to_sockptr(optval, &val, olr))
-- 
2.43.0

[PATCH 6.7 380/713] l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 955e9876ba4ee26eeaab1b13517f5b2c88e73d55 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ppp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index f011af6601c9c..6146e4e67bbb5 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1356,11 +1356,11 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	err = -ENOTCONN;
 	if (!sk->sk_user_data)
 		goto end;
-- 
2.43.0

[PATCH 6.7 381/713] udp: fix incorrect parameter validation in the udp_lib_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 4bb3ba7b74fceec6f558745b25a43c6521cf5506 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index e474b201900f9..17231c0f88302 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2792,11 +2792,11 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case UDP_CORK:
 		val = udp_test_bit(CORK, sk);
-- 
2.43.0

[PATCH 6.7 382/713] net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 3ed5f415133f9b7518fbe55ba9ae9a3f5e700929 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index 1184d40167b86..eda933c097926 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1152,10 +1152,11 @@ static int kcm_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case KCM_RECV_DISABLE:
 		val = kcm->rx_disabled;
-- 
2.43.0

[PATCH 6.7 383/713] net/x25: fix incorrect parameter validation in the x25_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit d6eb8de2015f0c24822e47356f839167ebde2945 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/x25/af_x25.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index aad8ffeaee041..ae90696efe929 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -460,12 +460,12 @@ static int x25_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		goto out;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	rc = -EINVAL;
 	if (len < 0)
 		goto out;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	rc = -EFAULT;
 	if (put_user(len, optlen))
 		goto out;
-- 
2.43.0

[PATCH 6.7 384/713] devlink: Fix length of eswitch inline-mode

[Sasha Levin]

From: William Tu <witu@nvidia.com>

[ Upstream commit 8f4cd89bf10607de08231d6d91a73dd63336808e ]

Set eswitch inline-mode to be u8, not u16. Otherwise, errors below

$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
  inline-mode network
    Error: Attribute failed policy validation.
    kernel answers: Numerical result out of rang
    netlink: 'devlink': attribute type 26 has an invalid length.

Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240310164547.35219-1-witu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/netlink/specs/devlink.yaml | 2 +-
 net/devlink/netlink_gen.c                | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml
index 572d83a414d0d..42a9d77803b2b 100644
--- a/Documentation/netlink/specs/devlink.yaml
+++ b/Documentation/netlink/specs/devlink.yaml
@@ -244,7 +244,7 @@ attribute-sets:
 
       -
         name: eswitch-inline-mode
-        type: u16
+        type: u8
         enum: eswitch-inline-mode
       -
         name: dpipe-tables
diff --git a/net/devlink/netlink_gen.c b/net/devlink/netlink_gen.c
index 788dfdc498a95..371f27f653317 100644
--- a/net/devlink/netlink_gen.c
+++ b/net/devlink/netlink_gen.c
@@ -198,7 +198,7 @@ static const struct nla_policy devlink_eswitch_set_nl_policy[DEVLINK_ATTR_ESWITC
 	[DEVLINK_ATTR_BUS_NAME] = { .type = NLA_NUL_STRING, },
 	[DEVLINK_ATTR_DEV_NAME] = { .type = NLA_NUL_STRING, },
 	[DEVLINK_ATTR_ESWITCH_MODE] = NLA_POLICY_MAX(NLA_U16, 1),
-	[DEVLINK_ATTR_ESWITCH_INLINE_MODE] = NLA_POLICY_MAX(NLA_U16, 3),
+	[DEVLINK_ATTR_ESWITCH_INLINE_MODE] = NLA_POLICY_MAX(NLA_U8, 3),
 	[DEVLINK_ATTR_ESWITCH_ENCAP_MODE] = NLA_POLICY_MAX(NLA_U8, 1),
 };
 
-- 
2.43.0

[PATCH 6.7 385/713] nfp: flower: handle acti_netdevs allocation failure

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 84e95149bd341705f0eca6a7fcb955c548805002 ]

The kmalloc_array() in nfp_fl_lag_do_work() will return null, if
the physical memory has run out. As a result, if we dereference
the acti_netdevs, the null pointer dereference bugs will happen.

This patch adds a check to judge whether allocation failure occurs.
If it happens, the delayed work will be rescheduled and try again.

Fixes: bb9a8d031140 ("nfp: flower: monitor and offload LAG groups")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240308142540.9674-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/flower/lag_conf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
index 88d6d992e7d07..86db8e8141407 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
@@ -338,6 +338,11 @@ static void nfp_fl_lag_do_work(struct work_struct *work)
 
 		acti_netdevs = kmalloc_array(entry->slave_cnt,
 					     sizeof(*acti_netdevs), GFP_KERNEL);
+		if (!acti_netdevs) {
+			schedule_delayed_work(&lag->work,
+					      NFP_FL_LAG_DELAY);
+			continue;
+		}
 
 		/* Include sanity check in the loop. It may be that a bond has
 		 * changed between processing the last notification and the
-- 
2.43.0

[PATCH 6.7 386/713] bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()

[Sasha Levin]

From: Puranjay Mohan <puranjay12@gmail.com>

[ Upstream commit d6170e4aaf86424c24ce06e355b4573daa891b17 ]

On some architectures like ARM64, PMD_SIZE can be really large in some
configurations. Like with CONFIG_ARM64_64K_PAGES=y the PMD_SIZE is
512MB.

Use 2MB * num_possible_nodes() as the size for allocations done through
the prog pack allocator. On most architectures, PMD_SIZE will be equal
to 2MB in case of 4KB pages and will be greater than 2MB for bigger page
sizes.

Fixes: ea2babac63d4 ("bpf: Simplify bpf_prog_pack_[size|mask]")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://lore.kernel.org/all/7e216c88-77ee-47b8-becc-a0f780868d3c@sirena.org.uk/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403092219.dhgcuz2G-lkp@intel.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240311122722.86232-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index fe254ae035fe4..27fd41777176c 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -863,7 +863,12 @@ static LIST_HEAD(pack_list);
  * CONFIG_MMU=n. Use PAGE_SIZE in these cases.
  */
 #ifdef PMD_SIZE
-#define BPF_PROG_PACK_SIZE (PMD_SIZE * num_possible_nodes())
+/* PMD_SIZE is really big for some archs. It doesn't make sense to
+ * reserve too much memory in one allocation. Hardcode BPF_PROG_PACK_SIZE to
+ * 2MiB * num_possible_nodes(). On most architectures PMD_SIZE will be
+ * greater than or equal to 2MB.
+ */
+#define BPF_PROG_PACK_SIZE (SZ_2M * num_possible_nodes())
 #else
 #define BPF_PROG_PACK_SIZE PAGE_SIZE
 #endif
-- 
2.43.0

[PATCH 6.7 387/713] dm raid: fix false positive for requeue needed during reshape

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit b25b8f4b8ecef0f48c05f0c3572daeabefe16526 ]

An empty flush doesn't have a payload, so it should never be looked at
when considering to possibly requeue a bio for the case when a reshape
is in progress.

Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Reported-by: Patrick Plenefisch <simonpatp@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index eb009d6bb03a1..13eb47b997f94 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3329,14 +3329,14 @@ static int raid_map(struct dm_target *ti, struct bio *bio)
 	struct mddev *mddev = &rs->md;
 
 	/*
-	 * If we're reshaping to add disk(s)), ti->len and
+	 * If we're reshaping to add disk(s), ti->len and
 	 * mddev->array_sectors will differ during the process
 	 * (ti->len > mddev->array_sectors), so we have to requeue
 	 * bios with addresses > mddev->array_sectors here or
 	 * there will occur accesses past EOD of the component
 	 * data images thus erroring the raid set.
 	 */
-	if (unlikely(bio_end_sector(bio) > mddev->array_sectors))
+	if (unlikely(bio_has_data(bio) && bio_end_sector(bio) > mddev->array_sectors))
 		return DM_MAPIO_REQUEUE;
 
 	md_handle_request(mddev, bio);
-- 
2.43.0

[PATCH 6.7 388/713] dm: call the resume method on internal suspend

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 65e8fbde64520001abf1c8d0e573561b4746ef38 ]

There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.

Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.

If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS:  00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
 <TASK>
 ? die+0x2d/0x80
 ? do_trap+0xeb/0xf0
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? do_error_trap+0x60/0x80
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? exc_invalid_op+0x49/0x60
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? asm_exc_invalid_op+0x16/0x20
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ? __list_del_entry_valid_or_report+0x77/0xc0
 origin_postsuspend+0x1a/0x50 [dm_snapshot]
 dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
 dm_suspend+0xd8/0xf0 [dm_mod]
 dev_suspend+0x1f2/0x2f0 [dm_mod]
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ctl_ioctl+0x300/0x5f0 [dm_mod]
 dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
 __x64_compat_sys_ioctl+0x104/0x170
 do_syscall_64+0x184/0x1b0
 entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---

Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 23c32cd1f1d88..4ff9bebb81ad5 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2945,6 +2945,9 @@ static void __dm_internal_suspend(struct mapped_device *md, unsigned int suspend
 
 static void __dm_internal_resume(struct mapped_device *md)
 {
+	int r;
+	struct dm_table *map;
+
 	BUG_ON(!md->internal_suspend_count);
 
 	if (--md->internal_suspend_count)
@@ -2953,12 +2956,23 @@ static void __dm_internal_resume(struct mapped_device *md)
 	if (dm_suspended_md(md))
 		goto done; /* resume from nested suspend */
 
-	/*
-	 * NOTE: existing callers don't need to call dm_table_resume_targets
-	 * (which may fail -- so best to avoid it for now by passing NULL map)
-	 */
-	(void) __dm_resume(md, NULL);
-
+	map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+	r = __dm_resume(md, map);
+	if (r) {
+		/*
+		 * If a preresume method of some target failed, we are in a
+		 * tricky situation. We can't return an error to the caller. We
+		 * can't fake success because then the "resume" and
+		 * "postsuspend" methods would not be paired correctly, and it
+		 * would break various targets, for example it would cause list
+		 * corruption in the "origin" target.
+		 *
+		 * So, we fake normal suspend here, to make sure that the
+		 * "resume" and "postsuspend" methods will be paired correctly.
+		 */
+		DMERR("Preresume method failed: %d", r);
+		set_bit(DMF_SUSPENDED, &md->flags);
+	}
 done:
 	clear_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
 	smp_mb__after_atomic();
-- 
2.43.0

[PATCH 6.7 389/713] drm/tegra: dsi: Add missing check for of_find_device_by_node

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit afe6fcb9775882230cd29b529203eabd5d2a638d ]

Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index fbfe92a816d4b..e419b76e57d3e 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1544,9 +1544,11 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
 	np = of_parse_phandle(dsi->dev->of_node, "nvidia,ganged-mode", 0);
 	if (np) {
 		struct platform_device *gangster = of_find_device_by_node(np);
+		of_node_put(np);
+		if (!gangster)
+			return -EPROBE_DEFER;
 
 		dsi->slave = platform_get_drvdata(gangster);
-		of_node_put(np);
 
 		if (!dsi->slave) {
 			put_device(&gangster->dev);
-- 
2.43.0

[PATCH 6.7 390/713] drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe

[Sasha Levin]

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit 0800880f4eb789b7d299db40f2e86e056bd33a4e ]

The pm_runtime_enable function increases the power disable depth,
which means that we must perform a matching decrement on the error
handling path to maintain balance within the given context.
Additionally, we need to address the same issue for pm_runtime_get_sync.
We fix this by invoking pm_runtime_disable and pm_runtime_put_sync
when error returns.

Fixes: 82b81b3ec1a7 ("drm/tegra: dpaux: Implement runtime PM")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_B13DB7F6C0023C46157250A524966F326A09@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dpaux.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index ef02d530f78d7..ae12d001a04bf 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c
@@ -522,7 +522,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
 	if (err < 0) {
 		dev_err(dpaux->dev, "failed to request IRQ#%u: %d\n",
 			dpaux->irq, err);
-		return err;
+		goto err_pm_disable;
 	}
 
 	disable_irq(dpaux->irq);
@@ -542,7 +542,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
 	 */
 	err = tegra_dpaux_pad_config(dpaux, DPAUX_PADCTL_FUNC_I2C);
 	if (err < 0)
-		return err;
+		goto err_pm_disable;
 
 #ifdef CONFIG_GENERIC_PINCONF
 	dpaux->desc.name = dev_name(&pdev->dev);
@@ -555,7 +555,8 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
 	dpaux->pinctrl = devm_pinctrl_register(&pdev->dev, &dpaux->desc, dpaux);
 	if (IS_ERR(dpaux->pinctrl)) {
 		dev_err(&pdev->dev, "failed to register pincontrol\n");
-		return PTR_ERR(dpaux->pinctrl);
+		err = PTR_ERR(dpaux->pinctrl);
+		goto err_pm_disable;
 	}
 #endif
 	/* enable and clear all interrupts */
@@ -571,10 +572,15 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
 	err = devm_of_dp_aux_populate_ep_devices(&dpaux->aux);
 	if (err < 0) {
 		dev_err(dpaux->dev, "failed to populate AUX bus: %d\n", err);
-		return err;
+		goto err_pm_disable;
 	}
 
 	return 0;
+
+err_pm_disable:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	return err;
 }
 
 static void tegra_dpaux_remove(struct platform_device *pdev)
-- 
2.43.0

[PATCH 6.7 391/713] drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 830c1ded356369cd1303e8bb87ce3fea6e744de8 ]

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 54 ++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index e419b76e57d3e..0c8ad8ee5009a 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1596,44 +1596,58 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 
 	if (!pdev->dev.pm_domain) {
 		dsi->rst = devm_reset_control_get(&pdev->dev, "dsi");
-		if (IS_ERR(dsi->rst))
-			return PTR_ERR(dsi->rst);
+		if (IS_ERR(dsi->rst)) {
+			err = PTR_ERR(dsi->rst);
+			goto remove;
+		}
 	}
 
 	dsi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dsi->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
-				     "cannot get DSI clock\n");
+	if (IS_ERR(dsi->clk)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
+				    "cannot get DSI clock\n");
+		goto remove;
+	}
 
 	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
-	if (IS_ERR(dsi->clk_lp))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
-				     "cannot get low-power clock\n");
+	if (IS_ERR(dsi->clk_lp)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
+				    "cannot get low-power clock\n");
+		goto remove;
+	}
 
 	dsi->clk_parent = devm_clk_get(&pdev->dev, "parent");
-	if (IS_ERR(dsi->clk_parent))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
-				     "cannot get parent clock\n");
+	if (IS_ERR(dsi->clk_parent)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
+				    "cannot get parent clock\n");
+		goto remove;
+	}
 
 	dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
-	if (IS_ERR(dsi->vdd))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
-				     "cannot get VDD supply\n");
+	if (IS_ERR(dsi->vdd)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
+				    "cannot get VDD supply\n");
+		goto remove;
+	}
 
 	err = tegra_dsi_setup_clocks(dsi);
 	if (err < 0) {
 		dev_err(&pdev->dev, "cannot setup clocks\n");
-		return err;
+		goto remove;
 	}
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dsi->regs = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(dsi->regs))
-		return PTR_ERR(dsi->regs);
+	if (IS_ERR(dsi->regs)) {
+		err = PTR_ERR(dsi->regs);
+		goto remove;
+	}
 
 	dsi->mipi = tegra_mipi_request(&pdev->dev, pdev->dev.of_node);
-	if (IS_ERR(dsi->mipi))
-		return PTR_ERR(dsi->mipi);
+	if (IS_ERR(dsi->mipi)) {
+		err = PTR_ERR(dsi->mipi);
+		goto remove;
+	}
 
 	dsi->host.ops = &tegra_dsi_host_ops;
 	dsi->host.dev = &pdev->dev;
@@ -1664,6 +1678,8 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
+remove:
+	tegra_output_remove(&dsi->output);
 	return err;
 }
 
-- 
2.43.0

[PATCH 6.7 392/713] drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5286a9fc280c45b6b307ee1b07f7a997e042252c ]

If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.

Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 0c8ad8ee5009a..db606e151afc8 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1675,6 +1675,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	return 0;
 
 unregister:
+	pm_runtime_disable(&pdev->dev);
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
-- 
2.43.0

[PATCH 6.7 393/713] drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 643ae131b8598fb2940c92c7d23fe62823a119c8 ]

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b7c564eb71977678b20abd73ee52001a51cf327.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/hdmi.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index 0ba3ca3ac509d..4cfa4df2141cf 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -1855,12 +1855,14 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 		return err;
 
 	hdmi->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(hdmi->regs))
-		return PTR_ERR(hdmi->regs);
+	if (IS_ERR(hdmi->regs)) {
+		err = PTR_ERR(hdmi->regs);
+		goto remove;
+	}
 
 	err = platform_get_irq(pdev, 0);
 	if (err < 0)
-		return err;
+		goto remove;
 
 	hdmi->irq = err;
 
@@ -1869,18 +1871,18 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to request IRQ#%u: %d\n",
 			hdmi->irq, err);
-		return err;
+		goto remove;
 	}
 
 	platform_set_drvdata(pdev, hdmi);
 
 	err = devm_pm_runtime_enable(&pdev->dev);
 	if (err)
-		return err;
+		goto remove;
 
 	err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
 	if (err)
-		return err;
+		goto remove;
 
 	INIT_LIST_HEAD(&hdmi->client.list);
 	hdmi->client.ops = &hdmi_client_ops;
@@ -1890,10 +1892,14 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to register host1x client: %d\n",
 			err);
-		return err;
+		goto remove;
 	}
 
 	return 0;
+
+remove:
+	tegra_output_remove(&hdmi->output);
+	return err;
 }
 
 static void tegra_hdmi_remove(struct platform_device *pdev)
-- 
2.43.0

[PATCH 6.7 394/713] drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit bc456b5d93dbfdbd89f2a036f4f3d8026595f9e4 ]

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0001f61eb89048bc36241629b564195689cf54b6.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/rgb.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
index fc66bbd913b24..53c492b13d129 100644
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -225,26 +225,28 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)
 	rgb->clk = devm_clk_get(dc->dev, NULL);
 	if (IS_ERR(rgb->clk)) {
 		dev_err(dc->dev, "failed to get clock\n");
-		return PTR_ERR(rgb->clk);
+		err = PTR_ERR(rgb->clk);
+		goto remove;
 	}
 
 	rgb->clk_parent = devm_clk_get(dc->dev, "parent");
 	if (IS_ERR(rgb->clk_parent)) {
 		dev_err(dc->dev, "failed to get parent clock\n");
-		return PTR_ERR(rgb->clk_parent);
+		err = PTR_ERR(rgb->clk_parent);
+		goto remove;
 	}
 
 	err = clk_set_parent(rgb->clk, rgb->clk_parent);
 	if (err < 0) {
 		dev_err(dc->dev, "failed to set parent clock: %d\n", err);
-		return err;
+		goto remove;
 	}
 
 	rgb->pll_d_out0 = clk_get_sys(NULL, "pll_d_out0");
 	if (IS_ERR(rgb->pll_d_out0)) {
 		err = PTR_ERR(rgb->pll_d_out0);
 		dev_err(dc->dev, "failed to get pll_d_out0: %d\n", err);
-		return err;
+		goto remove;
 	}
 
 	if (dc->soc->has_pll_d2_out0) {
@@ -252,13 +254,17 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)
 		if (IS_ERR(rgb->pll_d2_out0)) {
 			err = PTR_ERR(rgb->pll_d2_out0);
 			dev_err(dc->dev, "failed to get pll_d2_out0: %d\n", err);
-			return err;
+			goto remove;
 		}
 	}
 
 	dc->rgb = &rgb->output;
 
 	return 0;
+
+remove:
+	tegra_output_remove(&rgb->output);
+	return err;
 }
 
 void tegra_dc_rgb_remove(struct tegra_dc *dc)
-- 
2.43.0

[PATCH 6.7 395/713] drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 45c8034db47842b25a3ab6139d71e13b4e67b9b3 ]

If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.

Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it.

Fixes: 0c921b6d4ba0 ("drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0182895ead4e4730426616b0d9995954c960b634.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/rgb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
index 53c492b13d129..1e8ec50b759e4 100644
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -254,7 +254,7 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)
 		if (IS_ERR(rgb->pll_d2_out0)) {
 			err = PTR_ERR(rgb->pll_d2_out0);
 			dev_err(dc->dev, "failed to get pll_d2_out0: %d\n", err);
-			goto remove;
+			goto put_pll;
 		}
 	}
 
@@ -262,6 +262,8 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)
 
 	return 0;
 
+put_pll:
+	clk_put(rgb->pll_d_out0);
 remove:
 	tegra_output_remove(&rgb->output);
 	return err;
-- 
2.43.0

[PATCH 6.7 396/713] drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 2db4578ef6ffb2b52115ca0ebf897b60ec559556 ]

If an error occurs after a successful of_get_i2c_adapter_by_node() call, it
should be undone by a corresponding i2c_put_adapter().

Add the missing i2c_put_adapter() call.

Fixes: 9be7d864cf07 ("drm/tegra: Implement panel support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b38604178991e1f08b2cda219103be266be2d680.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/output.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index dc2dcb5ca1c89..d7d2389ac2f5a 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -142,8 +142,10 @@ int tegra_output_probe(struct tegra_output *output)
 					GPIOD_IN,
 					"HDMI hotplug detect");
 	if (IS_ERR(output->hpd_gpio)) {
-		if (PTR_ERR(output->hpd_gpio) != -ENOENT)
-			return PTR_ERR(output->hpd_gpio);
+		if (PTR_ERR(output->hpd_gpio) != -ENOENT) {
+			err = PTR_ERR(output->hpd_gpio);
+			goto put_i2c;
+		}
 
 		output->hpd_gpio = NULL;
 	}
@@ -152,7 +154,7 @@ int tegra_output_probe(struct tegra_output *output)
 		err = gpiod_to_irq(output->hpd_gpio);
 		if (err < 0) {
 			dev_err(output->dev, "gpiod_to_irq(): %d\n", err);
-			return err;
+			goto put_i2c;
 		}
 
 		output->hpd_irq = err;
@@ -165,7 +167,7 @@ int tegra_output_probe(struct tegra_output *output)
 		if (err < 0) {
 			dev_err(output->dev, "failed to request IRQ#%u: %d\n",
 				output->hpd_irq, err);
-			return err;
+			goto put_i2c;
 		}
 
 		output->connector.polled = DRM_CONNECTOR_POLL_HPD;
@@ -179,6 +181,12 @@ int tegra_output_probe(struct tegra_output *output)
 	}
 
 	return 0;
+
+put_i2c:
+	if (output->ddc)
+		i2c_put_adapter(output->ddc);
+
+	return err;
 }
 
 void tegra_output_remove(struct tegra_output *output)
-- 
2.43.0

[PATCH 6.7 397/713] drm/rockchip: inno_hdmi: Fix video timing

[Sasha Levin]

From: Alex Bee <knaerzche@gmail.com>

[ Upstream commit 47a145c03484d33e65d773169d5ca1b9fe2a492e ]

The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].

[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c

Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/inno_hdmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 6e5b922a121e2..345253e033c53 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -412,7 +412,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
 
-	value = mode->hsync_start - mode->hdisplay;
+	value = mode->htotal - mode->hsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
 
@@ -427,7 +427,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	value = mode->vtotal - mode->vdisplay;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
 
-	value = mode->vsync_start - mode->vdisplay;
+	value = mode->vtotal - mode->vsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
 
 	value = mode->vsync_end - mode->vsync_start;
-- 
2.43.0

[PATCH 6.7 398/713] drm: Don't treat 0 as -1 in drm_fixp2int_ceil

[Sasha Levin]

From: Harry Wentland <harry.wentland@amd.com>

[ Upstream commit cf8837d7204481026335461629b84ac7f4538fa5 ]

Unit testing this in VKMS shows that passing 0 into
this function returns -1, which is highly counter-
intuitive. Fix it by checking whether the input is
>= 0 instead of > 0.

Fixes: 64566b5e767f ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_fixed.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_fixed.h b/include/drm/drm_fixed.h
index 6ea339d5de088..0c9f917a4d4be 100644
--- a/include/drm/drm_fixed.h
+++ b/include/drm/drm_fixed.h
@@ -95,7 +95,7 @@ static inline int drm_fixp2int_round(s64 a)
 
 static inline int drm_fixp2int_ceil(s64 a)
 {
-	if (a > 0)
+	if (a >= 0)
 		return drm_fixp2int(a + DRM_FIXED_ALMOST_ONE);
 	else
 		return drm_fixp2int(a - DRM_FIXED_ALMOST_ONE);
-- 
2.43.0

[PATCH 6.7 399/713] drm/vkms: Avoid reading beyond LUT array

[Sasha Levin]

From: Harry Wentland <harry.wentland@amd.com>

[ Upstream commit 2fee84030d12d9fddfa874e4562d71761a129277 ]

When the floor LUT index (drm_fixp2int(lut_index) is the last
index of the array the ceil LUT index will point to an entry
beyond the array. Make sure we guard against it and use the
value of the floor LUT index.

v3:
 - Drop bits from commit description that didn't contribute
   anything of value

Fixes: db1f254f2cfa ("drm/vkms: Add support to 1D gamma LUT")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-6-harry.wentland@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vkms/vkms_composer.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
index 3c99fb8b54e2d..e7441b227b3ce 100644
--- a/drivers/gpu/drm/vkms/vkms_composer.c
+++ b/drivers/gpu/drm/vkms/vkms_composer.c
@@ -123,6 +123,8 @@ static u16 apply_lut_to_channel_value(const struct vkms_color_lut *lut, u16 chan
 				      enum lut_channel channel)
 {
 	s64 lut_index = get_lut_index(lut, channel_value);
+	u16 *floor_lut_value, *ceil_lut_value;
+	u16 floor_channel_value, ceil_channel_value;
 
 	/*
 	 * This checks if `struct drm_color_lut` has any gap added by the compiler
@@ -130,11 +132,15 @@ static u16 apply_lut_to_channel_value(const struct vkms_color_lut *lut, u16 chan
 	 */
 	static_assert(sizeof(struct drm_color_lut) == sizeof(__u16) * 4);
 
-	u16 *floor_lut_value = (__u16 *)&lut->base[drm_fixp2int(lut_index)];
-	u16 *ceil_lut_value = (__u16 *)&lut->base[drm_fixp2int_ceil(lut_index)];
+	floor_lut_value = (__u16 *)&lut->base[drm_fixp2int(lut_index)];
+	if (drm_fixp2int(lut_index) == (lut->lut_length - 1))
+		/* We're at the end of the LUT array, use same value for ceil and floor */
+		ceil_lut_value = floor_lut_value;
+	else
+		ceil_lut_value = (__u16 *)&lut->base[drm_fixp2int_ceil(lut_index)];
 
-	u16 floor_channel_value = floor_lut_value[channel];
-	u16 ceil_channel_value = ceil_lut_value[channel];
+	floor_channel_value = floor_lut_value[channel];
+	ceil_channel_value = ceil_lut_value[channel];
 
 	return lerp_u16(floor_channel_value, ceil_channel_value,
 			lut_index & DRM_FIXED_DECIMAL_MASK);
-- 
2.43.0

[PATCH 6.7 400/713] drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 89709105a6091948ffb6ec2427954cbfe45358ce ]

When ida_alloc_max fails, resources allocated before should be freed,
including *res allocated by kmalloc and ttm_resource_init.

Fixes: d3bcb4b02fe9 ("drm/vmwgfx: switch the TTM backends to self alloc")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204091416.3308430-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
index ceb4d3d3b965a..a0b47c9b33f55 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
@@ -64,8 +64,11 @@ static int vmw_gmrid_man_get_node(struct ttm_resource_manager *man,
 	ttm_resource_init(bo, place, *res);
 
 	id = ida_alloc_max(&gman->gmr_ida, gman->max_gmr_ids - 1, GFP_KERNEL);
-	if (id < 0)
+	if (id < 0) {
+		ttm_resource_fini(man, *res);
+		kfree(*res);
 		return id;
+	}
 
 	spin_lock(&gman->lock);
 
-- 
2.43.0

[PATCH 6.7 401/713] drm/rockchip: lvds: do not overwrite error code

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 79b09453c4e369ca81cfb670d0136d089e3b92f0 ]

ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index f0f47e9abf5aa..17d8fc797151a 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -578,7 +578,6 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		goto err_put_port;
 	} else if (ret) {
 		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
-		ret = -EPROBE_DEFER;
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 6.7 402/713] drm/rockchip: lvds: do not print scary message when probing defer

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 52d11c863ac92e36a0365249f7f6d27ac48c78bc ]

This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 17d8fc797151a..f2831d304e7bd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -577,7 +577,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		ret = -EINVAL;
 		goto err_put_port;
 	} else if (ret) {
-		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
+		dev_err_probe(dev, ret, "failed to find panel and bridge node\n");
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 6.7 403/713] drm/panel-edp: use put_sync in unprepare

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 49ddab089611ae5ddd0201ddbbf633da75bfcc25 ]

Some edp panel requires T10 (Delay from end of valid video data transmitted
by the Source device to power-off) less than 500ms. Using autosuspend with
delay set as 1000 violates this requirement.

Use put_sync_suspend in unprepare to meet the spec. For other cases (such
as getting EDID), it still uses autosuspend.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220221418.2610185-1-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-edp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index cba5a93e60822..70feee7876114 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -413,8 +413,7 @@ static int panel_edp_unprepare(struct drm_panel *panel)
 	if (!p->prepared)
 		return 0;
 
-	pm_runtime_mark_last_busy(panel->dev);
-	ret = pm_runtime_put_autosuspend(panel->dev);
+	ret = pm_runtime_put_sync_suspend(panel->dev);
 	if (ret < 0)
 		return ret;
 	p->prepared = false;
-- 
2.43.0

[PATCH 6.7 404/713] drm/lima: fix a memleak in lima_heap_alloc

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 04ae3eb470e52a3c41babe85ff8cee195e4dcbea ]

When lima_vm_map_bo fails, the resources need to be deallocated, or
there will be memleaks.

Fixes: 6aebc51d7aef ("drm/lima: support heap buffer creation")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117071328.3811480-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/lima/lima_gem.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/lima/lima_gem.c b/drivers/gpu/drm/lima/lima_gem.c
index 4f9736e5f929b..7ea244d876ca6 100644
--- a/drivers/gpu/drm/lima/lima_gem.c
+++ b/drivers/gpu/drm/lima/lima_gem.c
@@ -75,29 +75,34 @@ int lima_heap_alloc(struct lima_bo *bo, struct lima_vm *vm)
 	} else {
 		bo->base.sgt = kmalloc(sizeof(*bo->base.sgt), GFP_KERNEL);
 		if (!bo->base.sgt) {
-			sg_free_table(&sgt);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_out0;
 		}
 	}
 
 	ret = dma_map_sgtable(dev, &sgt, DMA_BIDIRECTIONAL, 0);
-	if (ret) {
-		sg_free_table(&sgt);
-		kfree(bo->base.sgt);
-		bo->base.sgt = NULL;
-		return ret;
-	}
+	if (ret)
+		goto err_out1;
 
 	*bo->base.sgt = sgt;
 
 	if (vm) {
 		ret = lima_vm_map_bo(vm, bo, old_size >> PAGE_SHIFT);
 		if (ret)
-			return ret;
+			goto err_out2;
 	}
 
 	bo->heap_size = new_size;
 	return 0;
+
+err_out2:
+	dma_unmap_sgtable(dev, &sgt, DMA_BIDIRECTIONAL, 0);
+err_out1:
+	kfree(bo->base.sgt);
+	bo->base.sgt = NULL;
+err_out0:
+	sg_free_table(&sgt);
+	return ret;
 }
 
 int lima_gem_create_handle(struct drm_device *dev, struct drm_file *file,
-- 
2.43.0

[PATCH 6.7 405/713] ASoC: amd: acp: Add missing error handling in sof-mach

[Sasha Levin]

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

[ Upstream commit d0ada20279db2649a7549a2b8a4a3379c59f238d ]

Handle potential acp_sofdsp_dai_links_create() errors in ACP SOF machine
driver's probe function.  Note there is no need for an undo.

While at it, switch to dev_err_probe().

Fixes: 9f84940f5004 ("ASoC: amd: acp: Add SOF audio support on Chrome board")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/acp/acp-sof-mach.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/sound/soc/amd/acp/acp-sof-mach.c b/sound/soc/amd/acp/acp-sof-mach.c
index 5223033a122f8..354d0fc55299b 100644
--- a/sound/soc/amd/acp/acp-sof-mach.c
+++ b/sound/soc/amd/acp/acp-sof-mach.c
@@ -120,16 +120,14 @@ static int acp_sof_probe(struct platform_device *pdev)
 	if (dmi_id && dmi_id->driver_data)
 		acp_card_drvdata->tdm_mode = dmi_id->driver_data;
 
-	acp_sofdsp_dai_links_create(card);
+	ret = acp_sofdsp_dai_links_create(card);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to create DAI links\n");
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
-		dev_err(&pdev->dev,
-				"devm_snd_soc_register_card(%s) failed: %d\n",
-				card->name, ret);
-		return ret;
-	}
-
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to register card(%s)\n", card->name);
 	return 0;
 }
 
-- 
2.43.0

[PATCH 6.7 406/713] ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe()

[Sasha Levin]

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

[ Upstream commit 222be59e5eed1554119294edc743ee548c2371d0 ]

Driver uses kasprintf() to initialize fw_{code,data}_bin members of
struct acp_dev_data, but kfree() is never called to deallocate the
memory, which results in a memory leak.

Fix the issue by switching to devm_kasprintf(). Additionally, ensure the
allocation was successful by checking the pointer validity.

Fixes: f7da88003c53 ("ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platform")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/amd/acp.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c
index 603ea5fc0d0d4..c6f637f298476 100644
--- a/sound/soc/sof/amd/acp.c
+++ b/sound/soc/sof/amd/acp.c
@@ -547,17 +547,27 @@ int amd_sof_acp_probe(struct snd_sof_dev *sdev)
 	adata->signed_fw_image = false;
 	dmi_id = dmi_first_match(acp_sof_quirk_table);
 	if (dmi_id && dmi_id->driver_data) {
-		adata->fw_code_bin = kasprintf(GFP_KERNEL, "%s/sof-%s-code.bin",
-					       plat_data->fw_filename_prefix,
-					       chip->name);
-		adata->fw_data_bin = kasprintf(GFP_KERNEL, "%s/sof-%s-data.bin",
-					       plat_data->fw_filename_prefix,
-					       chip->name);
-		adata->signed_fw_image = dmi_id->driver_data;
+		adata->fw_code_bin = devm_kasprintf(sdev->dev, GFP_KERNEL,
+						    "%s/sof-%s-code.bin",
+						    plat_data->fw_filename_prefix,
+						    chip->name);
+		if (!adata->fw_code_bin) {
+			ret = -ENOMEM;
+			goto free_ipc_irq;
+		}
+
+		adata->fw_data_bin = devm_kasprintf(sdev->dev, GFP_KERNEL,
+						    "%s/sof-%s-data.bin",
+						    plat_data->fw_filename_prefix,
+						    chip->name);
+		if (!adata->fw_data_bin) {
+			ret = -ENOMEM;
+			goto free_ipc_irq;
+		}
 
-		dev_dbg(sdev->dev, "fw_code_bin:%s, fw_data_bin:%s\n", adata->fw_code_bin,
-			adata->fw_data_bin);
+		adata->signed_fw_image = dmi_id->driver_data;
 	}
+
 	adata->enable_fw_debug = enable_fw_debug;
 	acp_memory_init(sdev);
 
-- 
2.43.0

[PATCH 6.7 407/713] dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 33b7db45533af240fe44e809f9dc4d604cf82d07 ]

Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just T210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes 210 you don't get
this driver.

Fixes: 433de642a76c9 ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240112093310.329642-2-pbrobinson@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 70ba506dabab5..de6eb370d485d 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -629,16 +629,16 @@ config TEGRA20_APB_DMA
 
 config TEGRA210_ADMA
 	tristate "NVIDIA Tegra210 ADMA support"
-	depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST)
+	depends on (ARCH_TEGRA || COMPILE_TEST)
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-	  Support for the NVIDIA Tegra210 ADMA controller driver. The
-	  DMA controller has multiple DMA channels and is used to service
-	  various audio clients in the Tegra210 audio processing engine
-	  (APE). This DMA controller transfers data from memory to
-	  peripheral and vice versa. It does not support memory to
-	  memory data transfer.
+	  Support for the NVIDIA Tegra210/Tegra186/Tegra194/Tegra234 ADMA
+	  controller driver. The DMA controller has multiple DMA channels
+	  and is used to service various audio clients in the Tegra210
+	  audio processing engine (APE). This DMA controller transfers
+	  data from memory to peripheral and vice versa. It does not
+	  support memory to memory data transfer.
 
 config TIMB_DMA
 	tristate "Timberdale FPGA DMA support"
-- 
2.43.0

[PATCH 6.7 408/713] media: tc358743: register v4l2 async device only after successful setup

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 87399f1ff92203d65f1febf5919429f4bb613a02 ]

Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice")
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110090111.458115-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tc358743.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 2785935da497b..558152575d102 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -2091,9 +2091,6 @@ static int tc358743_probe(struct i2c_client *client)
 	state->mbus_fmt_code = MEDIA_BUS_FMT_RGB888_1X24;
 
 	sd->dev = &client->dev;
-	err = v4l2_async_register_subdev(sd);
-	if (err < 0)
-		goto err_hdl;
 
 	mutex_init(&state->confctl_mutex);
 
@@ -2151,6 +2148,10 @@ static int tc358743_probe(struct i2c_client *client)
 	if (err)
 		goto err_work_queues;
 
+	err = v4l2_async_register_subdev(sd);
+	if (err < 0)
+		goto err_work_queues;
+
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 		  client->addr << 1, client->adapter->name);
 
-- 
2.43.0

[PATCH 6.7 409/713] media: cadence: csi2rx: use match fwnode for media link

[Sasha Levin]

From: Julien Massot <julien.massot@collabora.com>

[ Upstream commit 448699c522af9e3266f168c3f51f4c3713c7bee1 ]

Since commit 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching"),
async connections are matched using the async sub-device fwnode, not that
of the endpoint. Fix this by using the fwnode of the connection match to
find the pad.

Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/cadence/cdns-csi2rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 889f4fbbafb3c..c2a979397b39f 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -465,7 +465,7 @@ static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
 	struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev);
 
 	csi2rx->source_pad = media_entity_get_fwnode_pad(&s_subdev->entity,
-							 s_subdev->fwnode,
+							 asd->match.fwnode,
 							 MEDIA_PAD_FL_SOURCE);
 	if (csi2rx->source_pad < 0) {
 		dev_err(csi2rx->dev, "Couldn't find output pad for subdev %s\n",
-- 
2.43.0

[PATCH 6.7 410/713] PCI/DPC: Print all TLP Prefixes, not just the first

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 6568d82512b0a64809acff3d7a747362fa4288c8 ]

The TLP Prefix Log Register consists of multiple DWORDs (PCIe r6.1 sec
7.9.14.13) but the loop in dpc_process_rp_pio_error() keeps reading from
the first DWORD, so we print only the first PIO TLP Prefix (duplicated
several times), and we never print the second, third, etc., Prefixes.

Add the iteration count based offset calculation into the config read.

Fixes: f20c4ea49ec4 ("PCI/DPC: Add eDPC support")
Link: https://lore.kernel.org/r/20240118110815.3867-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: add user-visible details to commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/dpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 94111e4382413..e5d7c12854fa0 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -234,7 +234,7 @@ static void dpc_process_rp_pio_error(struct pci_dev *pdev)
 
 	for (i = 0; i < pdev->dpc_rp_log_size - 5; i++) {
 		pci_read_config_dword(pdev,
-			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
+			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG + i * 4, &prefix);
 		pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
 	}
  clear_status:
-- 
2.43.0

[PATCH 6.7 411/713] perf record: Fix possible incorrect free in record__switch_output()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit aff10a165201f6f60cff225083ce301ad3f5d8f1 ]

perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.

Fixes: 03724b2e9c45 ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-record.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index dcf288a4fb9a9..fa13479ed73d6 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -1818,8 +1818,8 @@ static int
 record__switch_output(struct record *rec, bool at_exit)
 {
 	struct perf_data *data = &rec->data;
+	char *new_filename = NULL;
 	int fd, err;
-	char *new_filename;
 
 	/* Same Size:      "2015122520103046"*/
 	char timestamp[] = "InvalidTimestamp";
-- 
2.43.0

[PATCH 6.7 412/713] perf top: Uniform the event name for the hybrid machine

[Sasha Levin]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit a61f89bf76ef6f87ec48dd90dbc73a6cf9952edc ]

It's hard to distinguish the default cycles events among hybrid PMUs.
For example,

  $ perf top
  Available samples
  385 cycles:P
  903 cycles:P

The other tool, e.g., perf record, uniforms the event name and adds the
hybrid PMU name before opening the event. So the events can be easily
distinguished. Apply the same methodology for the perf top as well.

The evlist__uniquify_name() will be invoked by both record and top.
Move it to util/evlist.c

With the patch:

  $ perf top
  Available samples
  148 cpu_atom/cycles:P/
  1K cpu_core/cycles:P/

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231214144612.1092028-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 02f9b50e0481 ("perf record: Check conflict between '--timestamp-filename' option and pipe mode before recording")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-record.c | 28 +---------------------------
 tools/perf/builtin-top.c    |  1 +
 tools/perf/util/evlist.c    | 25 +++++++++++++++++++++++++
 tools/perf/util/evlist.h    |  1 +
 4 files changed, 28 insertions(+), 27 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index fa13479ed73d6..b7f8c94d052d0 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -2216,32 +2216,6 @@ static void hit_auxtrace_snapshot_trigger(struct record *rec)
 	}
 }
 
-static void record__uniquify_name(struct record *rec)
-{
-	struct evsel *pos;
-	struct evlist *evlist = rec->evlist;
-	char *new_name;
-	int ret;
-
-	if (perf_pmus__num_core_pmus() == 1)
-		return;
-
-	evlist__for_each_entry(evlist, pos) {
-		if (!evsel__is_hybrid(pos))
-			continue;
-
-		if (strchr(pos->name, '/'))
-			continue;
-
-		ret = asprintf(&new_name, "%s/%s/",
-			       pos->pmu_name, pos->name);
-		if (ret) {
-			free(pos->name);
-			pos->name = new_name;
-		}
-	}
-}
-
 static int record__terminate_thread(struct record_thread *thread_data)
 {
 	int err;
@@ -2475,7 +2449,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	if (data->is_pipe && rec->evlist->core.nr_entries == 1)
 		rec->opts.sample_id = true;
 
-	record__uniquify_name(rec);
+	evlist__uniquify_name(rec->evlist);
 
 	/* Debug message used by test scripts */
 	pr_debug3("perf record opening and mmapping events\n");
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index ea8c7eca5eeed..8d7c31bd2ebfc 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1299,6 +1299,7 @@ static int __cmd_top(struct perf_top *top)
 		}
 	}
 
+	evlist__uniquify_name(top->evlist);
 	ret = perf_top__start_counters(top);
 	if (ret)
 		return ret;
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index b0ed14a6da9d4..eb1dd29c538d5 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -2525,3 +2525,28 @@ void evlist__warn_user_requested_cpus(struct evlist *evlist, const char *cpu_lis
 	}
 	perf_cpu_map__put(user_requested_cpus);
 }
+
+void evlist__uniquify_name(struct evlist *evlist)
+{
+	struct evsel *pos;
+	char *new_name;
+	int ret;
+
+	if (perf_pmus__num_core_pmus() == 1)
+		return;
+
+	evlist__for_each_entry(evlist, pos) {
+		if (!evsel__is_hybrid(pos))
+			continue;
+
+		if (strchr(pos->name, '/'))
+			continue;
+
+		ret = asprintf(&new_name, "%s/%s/",
+			       pos->pmu_name, pos->name);
+		if (ret) {
+			free(pos->name);
+			pos->name = new_name;
+		}
+	}
+}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 98e7ddb2bd305..cb91dc9117a27 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -442,5 +442,6 @@ struct evsel *evlist__find_evsel(struct evlist *evlist, int idx);
 int evlist__scnprintf_evsels(struct evlist *evlist, size_t size, char *bf);
 void evlist__check_mem_load_aux(struct evlist *evlist);
 void evlist__warn_user_requested_cpus(struct evlist *evlist, const char *cpu_list);
+void evlist__uniquify_name(struct evlist *evlist);
 
 #endif /* __PERF_EVLIST_H */
-- 
2.43.0

[PATCH 6.7 413/713] perf record: Check conflict between '--timestamp-filename' option and pipe mode before recording

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 02f9b50e04812782fd006ed21c6da1c5e3e373da ]

In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.

Before:

  # perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
  # To display the perf.data header info, please use --header/--header-only options.
  #
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Dump -.2024011812110182 ]
  #
  # Total Lost Samples: 0
  #
  # Samples: 4K of event 'cycles:P'
  # Event count (approx.): 2176784359
  #
  # Overhead  Command  Shared Object         Symbol
  # ........  .......  ....................  ......................................
  #
      97.83%  perf     perf                  [.] noploop

  #
  # (Tip: Print event counts in CSV format with: perf stat -x,)
  #

After:

  # perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
  WARNING: --timestamp-filename option is not available in pipe mode.
  # To display the perf.data header info, please use --header/--header-only options.
  #
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  #
  # Total Lost Samples: 0
  #
  # Samples: 4K of event 'cycles:P'
  # Event count (approx.): 2185575421
  #
  # Overhead  Command  Shared Object          Symbol
  # ........  .......  .....................  .............................................
  #
      97.75%  perf     perf                   [.] noploop

  #
  # (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
  #

Fixes: ecfd7a9c044e ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-record.c | 5 +++++
 tools/perf/util/data.c      | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index b7f8c94d052d0..5d86aa5ff5367 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -2449,6 +2449,11 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 	if (data->is_pipe && rec->evlist->core.nr_entries == 1)
 		rec->opts.sample_id = true;
 
+	if (rec->timestamp_filename && perf_data__is_pipe(data)) {
+		rec->timestamp_filename = false;
+		pr_warning("WARNING: --timestamp-filename option is not available in pipe mode.\n");
+	}
+
 	evlist__uniquify_name(rec->evlist);
 
 	/* Debug message used by test scripts */
diff --git a/tools/perf/util/data.c b/tools/perf/util/data.c
index c29d8a382b196..550675ce0b787 100644
--- a/tools/perf/util/data.c
+++ b/tools/perf/util/data.c
@@ -430,8 +430,6 @@ int perf_data__switch(struct perf_data *data,
 {
 	int ret;
 
-	if (check_pipe(data))
-		return -EINVAL;
 	if (perf_data__is_read(data))
 		return -EINVAL;
 
-- 
2.43.0

[PATCH 6.7 414/713] HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

[Sasha Levin]

From: Mikhail Khvainitski <me@khvoinitsky.org>

[ Upstream commit 2814646f76f8518326964f12ff20aaee70ba154d ]

Previous attempt to autodetect well-behaving patched firmware
introduced in commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw
on cptkbd and stop applying workaround") has shown that there are
false-positives on original firmware (on both 1st gen and 2nd gen
keyboards) which causes the middle button click workaround to be
mistakenly disabled.

This commit adds explicit parameter to sysfs to control this
workaround.

Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Fixes: 43527a0094c1 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-lenovo.c | 57 +++++++++++++++++++++++++++-------------
 1 file changed, 39 insertions(+), 18 deletions(-)

diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index 149a3c74346b4..f86c1ea83a037 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -54,10 +54,10 @@ struct lenovo_drvdata {
 	/* 0: Up
 	 * 1: Down (undecided)
 	 * 2: Scrolling
-	 * 3: Patched firmware, disable workaround
 	 */
 	u8 middlebutton_state;
 	bool fn_lock;
+	bool middleclick_workaround_cptkbd;
 };
 
 #define map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
@@ -621,6 +621,36 @@ static ssize_t attr_sensitivity_store_cptkbd(struct device *dev,
 	return count;
 }
 
+static ssize_t attr_middleclick_workaround_show_cptkbd(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n",
+		cptkbd_data->middleclick_workaround_cptkbd);
+}
+
+static ssize_t attr_middleclick_workaround_store_cptkbd(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t count)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
+	int value;
+
+	if (kstrtoint(buf, 10, &value))
+		return -EINVAL;
+	if (value < 0 || value > 1)
+		return -EINVAL;
+
+	cptkbd_data->middleclick_workaround_cptkbd = !!value;
+
+	return count;
+}
+
 
 static struct device_attribute dev_attr_fn_lock =
 	__ATTR(fn_lock, S_IWUSR | S_IRUGO,
@@ -632,10 +662,16 @@ static struct device_attribute dev_attr_sensitivity_cptkbd =
 			attr_sensitivity_show_cptkbd,
 			attr_sensitivity_store_cptkbd);
 
+static struct device_attribute dev_attr_middleclick_workaround_cptkbd =
+	__ATTR(middleclick_workaround, S_IWUSR | S_IRUGO,
+			attr_middleclick_workaround_show_cptkbd,
+			attr_middleclick_workaround_store_cptkbd);
+
 
 static struct attribute *lenovo_attributes_cptkbd[] = {
 	&dev_attr_fn_lock.attr,
 	&dev_attr_sensitivity_cptkbd.attr,
+	&dev_attr_middleclick_workaround_cptkbd.attr,
 	NULL
 };
 
@@ -686,23 +722,7 @@ static int lenovo_event_cptkbd(struct hid_device *hdev,
 {
 	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
 
-	if (cptkbd_data->middlebutton_state != 3) {
-		/* REL_X and REL_Y events during middle button pressed
-		 * are only possible on patched, bug-free firmware
-		 * so set middlebutton_state to 3
-		 * to never apply workaround anymore
-		 */
-		if (hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD &&
-				cptkbd_data->middlebutton_state == 1 &&
-				usage->type == EV_REL &&
-				(usage->code == REL_X || usage->code == REL_Y)) {
-			cptkbd_data->middlebutton_state = 3;
-			/* send middle button press which was hold before */
-			input_event(field->hidinput->input,
-				EV_KEY, BTN_MIDDLE, 1);
-			input_sync(field->hidinput->input);
-		}
-
+	if (cptkbd_data->middleclick_workaround_cptkbd) {
 		/* "wheel" scroll events */
 		if (usage->type == EV_REL && (usage->code == REL_WHEEL ||
 				usage->code == REL_HWHEEL)) {
@@ -1166,6 +1186,7 @@ static int lenovo_probe_cptkbd(struct hid_device *hdev)
 	cptkbd_data->middlebutton_state = 0;
 	cptkbd_data->fn_lock = true;
 	cptkbd_data->sensitivity = 0x05;
+	cptkbd_data->middleclick_workaround_cptkbd = true;
 	lenovo_features_set_cptkbd(hdev);
 
 	ret = sysfs_create_group(&hdev->dev.kobj, &lenovo_attr_group_cptkbd);
-- 
2.43.0

[PATCH 6.7 415/713] drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 4b09715f1504f1b6e8dff0e9643630610bc05141 ]

Tell snprintf() to store at most 10 bytes in the output buffer
instead of 30.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10

Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs")
Cc: Alex Hung <alex.hung@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 45c972f2630d8..417c9cb47b89e 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -1483,7 +1483,7 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf,
 	const uint32_t rd_buf_size = 10;
 	struct pipe_ctx *pipe_ctx;
 	ssize_t result = 0;
-	int i, r, str_len = 30;
+	int i, r, str_len = 10;
 
 	rd_buf = kcalloc(rd_buf_size, sizeof(char), GFP_KERNEL);
 
-- 
2.43.0

[PATCH 6.7 416/713] perf pmu: Treat the msr pmu as software

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 24852ef2e2d5c555c2da05baff112ea414b6e0f5 ]

The msr PMU is a software one, meaning msr events may be grouped
with events in a hardware context. As the msr PMU isn't marked as a
software PMU by perf_pmu__is_software, groups with the msr PMU in
are broken and the msr events placed in a different group. This
may lead to multiplexing errors where a hardware event isn't
counted while the msr event, such as tsc, is. Fix all of this by
marking the msr PMU as software, which agrees with the driver.

Before:
```
$ perf stat -e '{slots,tsc}' -a true
WARNING: events were regrouped to match PMUs

 Performance counter stats for 'system wide':

         1,750,335      slots
         4,243,557      tsc

       0.001456717 seconds time elapsed
```

After:
```
$ perf stat -e '{slots,tsc}' -a true
 Performance counter stats for 'system wide':

        12,526,380      slots
         3,415,163      tsc

       0.001488360 seconds time elapsed
```

Fixes: 251aa040244a ("perf parse-events: Wildcard most "numeric" events")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240124234200.1510417-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/pmu.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index d3c9aa4326bee..33e783fc908fe 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -1756,6 +1756,12 @@ bool pmu__name_match(const struct perf_pmu *pmu, const char *pmu_name)
 
 bool perf_pmu__is_software(const struct perf_pmu *pmu)
 {
+	const char *known_sw_pmus[] = {
+		"kprobe",
+		"msr",
+		"uprobe",
+	};
+
 	if (pmu->is_core || pmu->is_uncore || pmu->auxtrace)
 		return false;
 	switch (pmu->type) {
@@ -1767,7 +1773,11 @@ bool perf_pmu__is_software(const struct perf_pmu *pmu)
 	case PERF_TYPE_BREAKPOINT:	return true;
 	default: break;
 	}
-	return !strcmp(pmu->name, "kprobe") || !strcmp(pmu->name, "uprobe");
+	for (size_t i = 0; i < ARRAY_SIZE(known_sw_pmus); i++) {
+		if (!strcmp(pmu->name, known_sw_pmus[i]))
+			return true;
+	}
+	return false;
 }
 
 FILE *perf_pmu__open_file(const struct perf_pmu *pmu, const char *name)
-- 
2.43.0

[PATCH 6.7 417/713] ALSA: hda: cs35l41: Set Channel Index correctly when system is missing _DSD

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit 135096ebfab656823d0037102a00776f3914fee3 ]

Current method to set Channel Index when the system is missing _DSD
assumes that the channels alternate, which is not guaranteed.
Instead use the same methodology as the main driver does when _DSD
exists.

Fixes: 8c4c216db8fb ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD")

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240126164005.367021-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 5a5f4b499fd94..b5b24fefb20cf 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -207,6 +207,7 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
 	struct spi_device *spi;
 	bool dsd_found;
 	int ret;
+	int i;
 
 	for (cfg = cs35l41_config_table; cfg->ssid; cfg++) {
 		if (!strcasecmp(cfg->ssid, cs35l41->acpi_subsystem_id))
@@ -292,16 +293,6 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
 			cs35l41->index = id == 0x40 ? 0 : 1;
 	}
 
-	if (cfg->num_amps == 3)
-		/* 3 amps means a center channel, so no duplicate channels */
-		cs35l41->channel_index = 0;
-	else
-		/*
-		 * if 4 amps, there are duplicate channels, so they need different indexes
-		 * if 2 amps, no duplicate channels, channel_index would be 0
-		 */
-		cs35l41->channel_index = cs35l41->index / 2;
-
 	cs35l41->reset_gpio = fwnode_gpiod_get_index(acpi_fwnode_handle(cs35l41->dacpi), "reset",
 						     cs35l41->index, GPIOD_OUT_LOW,
 						     "cs35l41-reset");
@@ -309,6 +300,11 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
 
 	hw_cfg->spk_pos = cfg->channel[cs35l41->index];
 
+	cs35l41->channel_index = 0;
+	for (i = 0; i < cs35l41->index; i++)
+		if (cfg->channel[i] == hw_cfg->spk_pos)
+			cs35l41->channel_index++;
+
 	if (cfg->boost_type == INTERNAL) {
 		hw_cfg->bst_type = CS35L41_INT_BOOST;
 		hw_cfg->bst_ind = cfg->boost_ind_nanohenry;
-- 
2.43.0

[PATCH 6.7 418/713] drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 9ccfe80d022df7c595f1925afb31de2232900656 ]

The 'stream' pointer is used in dcn10_set_output_transfer_func() before
the check if 'stream' is NULL.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)

Fixes: ddef02de0d71 ("drm/amd/display: add null checks before logging")
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
index 1fc8436c8130e..2b3ef5cdbd458 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
@@ -1834,6 +1834,9 @@ bool dcn10_set_output_transfer_func(struct dc *dc, struct pipe_ctx *pipe_ctx,
 {
 	struct dpp *dpp = pipe_ctx->plane_res.dpp;
 
+	if (!stream)
+		return false;
+
 	if (dpp == NULL)
 		return false;
 
@@ -1856,8 +1859,8 @@ bool dcn10_set_output_transfer_func(struct dc *dc, struct pipe_ctx *pipe_ctx,
 	} else
 		dpp->funcs->dpp_program_regamma_pwl(dpp, NULL, OPP_REGAMMA_BYPASS);
 
-	if (stream != NULL && stream->ctx != NULL &&
-			stream->out_transfer_func != NULL) {
+	if (stream->ctx &&
+	    stream->out_transfer_func) {
 		log_tf(stream->ctx,
 				stream->out_transfer_func,
 				dpp->regamma_params.hw_points_num);
-- 
2.43.0

[PATCH 6.7 419/713] ASoC: sh: rz-ssi: Fix error message print

[Sasha Levin]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

[ Upstream commit 9a6d7c4fb2801b675a9c31a7ceb78c84b8c439bc ]

The devm_request_irq() call is done for "dma_rt" interrupt but the error
message printed "dma_tx" interrupt on failure, fix this by updating
dma_tx -> dma_rt in dev_err_probe() message. While at it aligned the code.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 38c042b59af0248a ("ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130150822.327434-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rz-ssi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c
index 14cf1a41fb0d1..9d103646973ad 100644
--- a/sound/soc/sh/rz-ssi.c
+++ b/sound/soc/sh/rz-ssi.c
@@ -1015,7 +1015,7 @@ static int rz_ssi_probe(struct platform_device *pdev)
 					       dev_name(&pdev->dev), ssi);
 			if (ret < 0)
 				return dev_err_probe(&pdev->dev, ret,
-						"irq request error (dma_tx)\n");
+						     "irq request error (dma_rt)\n");
 		} else {
 			if (ssi->irq_tx < 0)
 				return ssi->irq_tx;
-- 
2.43.0

[PATCH 6.7 420/713] drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs

[Sasha Levin]

From: Martin Krastev <martin.krastev@broadcom.com>

[ Upstream commit ed96cf7ad590989b009d6da5cd26387d995dac13 ]

The fencing of MOB creation used in vmw_du_get_cursor_mob was incompatible
with register-based device communication employed by this routine. As a
result cursor MOB creation was racy, leading to potentially broken/missing
mouse cursor on desktops using CursorMob device feature.

Fixes: 53bc3f6fb6b3 ("drm/vmwgfx: Clean up cursor mobs")
Signed-off-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126200804.732454-5-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 818b7f109f538..b51578918cf8d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -272,6 +272,7 @@ static int vmw_du_get_cursor_mob(struct vmw_cursor_plane *vcp,
 	u32 size = vmw_du_cursor_mob_size(vps->base.crtc_w, vps->base.crtc_h);
 	u32 i;
 	u32 cursor_max_dim, mob_max_size;
+	struct vmw_fence_obj *fence = NULL;
 	int ret;
 
 	if (!dev_priv->has_mob ||
@@ -313,7 +314,15 @@ static int vmw_du_get_cursor_mob(struct vmw_cursor_plane *vcp,
 	if (ret != 0)
 		goto teardown;
 
-	vmw_bo_fence_single(&vps->cursor.bo->tbo, NULL);
+	ret = vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
+	if (ret != 0) {
+		ttm_bo_unreserve(&vps->cursor.bo->tbo);
+		goto teardown;
+	}
+
+	dma_fence_wait(&fence->base, false);
+	dma_fence_put(&fence->base);
+
 	ttm_bo_unreserve(&vps->cursor.bo->tbo);
 	return 0;
 
-- 
2.43.0

[PATCH 6.7 421/713] pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 68540257cdf1d07ff8a649aa94c21c5804bbb9b0 ]

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6352ec9b63fdd38c2c70d8d203e46f21fbfeccdc.1705589612.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/renesas/pfc-r8a779g0.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/pinctrl/renesas/pfc-r8a779g0.c b/drivers/pinctrl/renesas/pfc-r8a779g0.c
index acdea6ac15253..d2de526a3b588 100644
--- a/drivers/pinctrl/renesas/pfc-r8a779g0.c
+++ b/drivers/pinctrl/renesas/pfc-r8a779g0.c
@@ -2384,6 +2384,14 @@ static const unsigned int scif_clk_mux[] = {
 	SCIF_CLK_MARK,
 };
 
+static const unsigned int scif_clk2_pins[] = {
+	/* SCIF_CLK2 */
+	RCAR_GP_PIN(8, 11),
+};
+static const unsigned int scif_clk2_mux[] = {
+	SCIF_CLK2_MARK,
+};
+
 /* - SSI ------------------------------------------------- */
 static const unsigned int ssi_data_pins[] = {
 	/* SSI_SD */
@@ -2694,6 +2702,7 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
 	SH_PFC_PIN_GROUP(scif4_clk),
 	SH_PFC_PIN_GROUP(scif4_ctrl),
 	SH_PFC_PIN_GROUP(scif_clk),
+	SH_PFC_PIN_GROUP(scif_clk2),
 
 	SH_PFC_PIN_GROUP(ssi_data),
 	SH_PFC_PIN_GROUP(ssi_ctrl),
@@ -3015,6 +3024,10 @@ static const char * const scif_clk_groups[] = {
 	"scif_clk",
 };
 
+static const char * const scif_clk2_groups[] = {
+	"scif_clk2",
+};
+
 static const char * const ssi_groups[] = {
 	"ssi_data",
 	"ssi_ctrl",
@@ -3102,6 +3115,7 @@ static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(scif3),
 	SH_PFC_FUNCTION(scif4),
 	SH_PFC_FUNCTION(scif_clk),
+	SH_PFC_FUNCTION(scif_clk2),
 
 	SH_PFC_FUNCTION(ssi),
 
-- 
2.43.0

[PATCH 6.7 422/713] clk: samsung: exynos850: Propagate SPI IPCLK rate change

[Sasha Levin]

From: Sam Protsenko <semen.protsenko@linaro.org>

[ Upstream commit 67c15187d4910ee353374676d4dddf09d8cb227e ]

When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding DIV clocks can actually change their
divider values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all SPI instances in Exynos850 (spi_0, spi_1 and spi_2) to make it
possible. This change involves next clocks:

usi_spi_0:

    Clock                  Block       Div range
    --------------------------------------------
    gout_spi0_ipclk        CMU_PERI    -
    dout_peri_spi0         CMU_PERI    /1..32
    mout_peri_spi_user     CMU_PERI    -
    dout_peri_ip           CMU_TOP     /1..16

usi_cmgp0:

    Clock                  Block       Div range
    --------------------------------------------
    gout_cmgp_usi0_ipclk   CMU_CMGP    -
    dout_cmgp_usi0         CMU_CMGP    /1..32
    mout_cmgp_usi0         CMU_CMGP    -
    gout_clkcmu_cmgp_bus   CMU_APM     -
    dout_apm_bus           CMU_APM     /1..8

usi_cmgp1:

    Clock                  Block       Div range
    --------------------------------------------
    gout_cmgp_usi1_ipclk   CMU_CMGP    -
    dout_cmgp_usi1         CMU_CMGP    /1..32
    mout_cmgp_usi1         CMU_CMGP    -
    gout_clkcmu_cmgp_bus   CMU_APM     -
    dout_apm_bus           CMU_APM     /1..8

With input clock of 400 MHz, this scheme provides next IPCLK rate range,
for each SPI block:

    SPI0:   781 kHz ... 400 MHz
    SPI1/2: 1.6 MHz ... 400 MHz

Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:

    SPI0:   200 kHz ... 49.9 MHz
    SPI1/2: 400 kHz ... 49.9 MHz

Which should cover all possible applications of SPI bus. Of course,
setting SPI frequency to values as low as 500 kHz will also affect the
common bus dividers (dout_apm_bus or dout_peri_ip), which in turn
effectively lowers the rates for all leaf bus clocks derived from those
dividers, like HSI2C and I3C clocks. But at least it gives the board
designer a choice, whether to keep all clocks (SPI/HSI2C/I3C) at high
frequencies, or make all those clocks have lower frequencies. Not
propagating the rate change to those common dividers would limit this
choice to "only high frequencies are allowed for SPI/HSI2C/I3C" option,
making the common dividers useless. This decision follows the "Worse is
better" approach, relying on the users/engineers to know the system
internals when working with such low-level features, instead of trying
to account for all possible use-cases.

Fixes: 7dd05578198b ("clk: samsung: Introduce Exynos850 clock driver")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240125013858.3986-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-exynos850.c | 33 +++++++++++++++--------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
index bdc1eef7d6e54..c7b0b9751307b 100644
--- a/drivers/clk/samsung/clk-exynos850.c
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -605,7 +605,7 @@ static const struct samsung_div_clock apm_div_clks[] __initconst = {
 
 static const struct samsung_gate_clock apm_gate_clks[] __initconst = {
 	GATE(CLK_GOUT_CLKCMU_CMGP_BUS, "gout_clkcmu_cmgp_bus", "dout_apm_bus",
-	     CLK_CON_GAT_CLKCMU_CMGP_BUS, 21, 0, 0),
+	     CLK_CON_GAT_CLKCMU_CMGP_BUS, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_GOUT_CLKCMU_CHUB_BUS, "gout_clkcmu_chub_bus",
 	     "mout_clkcmu_chub_bus",
 	     CLK_CON_GAT_GATE_CLKCMU_CHUB_BUS, 21, 0, 0),
@@ -974,19 +974,19 @@ static const struct samsung_fixed_rate_clock cmgp_fixed_clks[] __initconst = {
 static const struct samsung_mux_clock cmgp_mux_clks[] __initconst = {
 	MUX(CLK_MOUT_CMGP_ADC, "mout_cmgp_adc", mout_cmgp_adc_p,
 	    CLK_CON_MUX_CLK_CMGP_ADC, 0, 1),
-	MUX(CLK_MOUT_CMGP_USI0, "mout_cmgp_usi0", mout_cmgp_usi0_p,
-	    CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP0, 0, 1),
-	MUX(CLK_MOUT_CMGP_USI1, "mout_cmgp_usi1", mout_cmgp_usi1_p,
-	    CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP1, 0, 1),
+	MUX_F(CLK_MOUT_CMGP_USI0, "mout_cmgp_usi0", mout_cmgp_usi0_p,
+	      CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP0, 0, 1, CLK_SET_RATE_PARENT, 0),
+	MUX_F(CLK_MOUT_CMGP_USI1, "mout_cmgp_usi1", mout_cmgp_usi1_p,
+	      CLK_CON_MUX_MUX_CLK_CMGP_USI_CMGP1, 0, 1, CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_div_clock cmgp_div_clks[] __initconst = {
 	DIV(CLK_DOUT_CMGP_ADC, "dout_cmgp_adc", "gout_clkcmu_cmgp_bus",
 	    CLK_CON_DIV_DIV_CLK_CMGP_ADC, 0, 4),
-	DIV(CLK_DOUT_CMGP_USI0, "dout_cmgp_usi0", "mout_cmgp_usi0",
-	    CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP0, 0, 5),
-	DIV(CLK_DOUT_CMGP_USI1, "dout_cmgp_usi1", "mout_cmgp_usi1",
-	    CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP1, 0, 5),
+	DIV_F(CLK_DOUT_CMGP_USI0, "dout_cmgp_usi0", "mout_cmgp_usi0",
+	      CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP0, 0, 5, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_CMGP_USI1, "dout_cmgp_usi1", "mout_cmgp_usi1",
+	      CLK_CON_DIV_DIV_CLK_CMGP_USI_CMGP1, 0, 5, CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = {
@@ -1001,12 +1001,12 @@ static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = {
 	     "gout_clkcmu_cmgp_bus",
 	     CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK, 21, CLK_IGNORE_UNUSED, 0),
 	GATE(CLK_GOUT_CMGP_USI0_IPCLK, "gout_cmgp_usi0_ipclk", "dout_cmgp_usi0",
-	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK, 21, 0, 0),
+	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_GOUT_CMGP_USI0_PCLK, "gout_cmgp_usi0_pclk",
 	     "gout_clkcmu_cmgp_bus",
 	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_PCLK, 21, 0, 0),
 	GATE(CLK_GOUT_CMGP_USI1_IPCLK, "gout_cmgp_usi1_ipclk", "dout_cmgp_usi1",
-	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK, 21, 0, 0),
+	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_GOUT_CMGP_USI1_PCLK, "gout_cmgp_usi1_pclk",
 	     "gout_clkcmu_cmgp_bus",
 	     CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_PCLK, 21, 0, 0),
@@ -1557,8 +1557,9 @@ static const struct samsung_mux_clock peri_mux_clks[] __initconst = {
 	    mout_peri_uart_user_p, PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 4, 1),
 	MUX(CLK_MOUT_PERI_HSI2C_USER, "mout_peri_hsi2c_user",
 	    mout_peri_hsi2c_user_p, PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 4, 1),
-	MUX(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user", mout_peri_spi_user_p,
-	    PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1),
+	MUX_F(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user",
+	      mout_peri_spi_user_p, PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1,
+	      CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_div_clock peri_div_clks[] __initconst = {
@@ -1568,8 +1569,8 @@ static const struct samsung_div_clock peri_div_clks[] __initconst = {
 	    CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1, 0, 5),
 	DIV(CLK_DOUT_PERI_HSI2C2, "dout_peri_hsi2c2", "gout_peri_hsi2c2",
 	    CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2, 0, 5),
-	DIV(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user",
-	    CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5),
+	DIV_F(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user",
+	      CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5, CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
@@ -1611,7 +1612,7 @@ static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
 	     "mout_peri_bus_user",
 	     CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK, 21, 0, 0),
 	GATE(CLK_GOUT_SPI0_IPCLK, "gout_spi0_ipclk", "dout_peri_spi0",
-	     CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, 0, 0),
+	     CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_GOUT_SPI0_PCLK, "gout_spi0_pclk", "mout_peri_bus_user",
 	     CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK, 21, 0, 0),
 	GATE(CLK_GOUT_SYSREG_PERI_PCLK, "gout_sysreg_peri_pclk",
-- 
2.43.0

[PATCH 6.7 423/713] media: v4l2: cci: print leading 0 on error

[Sasha Levin]

From: Julien Massot <julien.massot@collabora.com>

[ Upstream commit 58ab1f9e140006e9e5686640f1773260038fe889 ]

In some error cases leading '0' for register address
were missing.

Fixes: 613cbb91e9ce ("media: Add MIPI CCI register access helper functions")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-cci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-cci.c b/drivers/media/v4l2-core/v4l2-cci.c
index 10005c80f43b5..ee3475bed37fa 100644
--- a/drivers/media/v4l2-core/v4l2-cci.c
+++ b/drivers/media/v4l2-core/v4l2-cci.c
@@ -32,7 +32,7 @@ int cci_read(struct regmap *map, u32 reg, u64 *val, int *err)
 
 	ret = regmap_bulk_read(map, reg, buf, len);
 	if (ret) {
-		dev_err(regmap_get_device(map), "Error reading reg 0x%4x: %d\n",
+		dev_err(regmap_get_device(map), "Error reading reg 0x%04x: %d\n",
 			reg, ret);
 		goto out;
 	}
@@ -131,7 +131,7 @@ int cci_write(struct regmap *map, u32 reg, u64 val, int *err)
 
 	ret = regmap_bulk_write(map, reg, buf, len);
 	if (ret)
-		dev_err(regmap_get_device(map), "Error writing reg 0x%4x: %d\n",
+		dev_err(regmap_get_device(map), "Error writing reg 0x%04x: %d\n",
 			reg, ret);
 
 out:
-- 
2.43.0

[PATCH 6.7 424/713] perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 4962aec0d684c8edb14574ccd0da53e4926ff834 ]

data->id has been initialized at line 2362, remove duplicate initialization.

Fixes: 3ad31d8a0df2 ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evsel.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 72a5dfc38d380..1fb24ca8aea52 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -2340,7 +2340,6 @@ int evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 	data->period = evsel->core.attr.sample_period;
 	data->cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 	data->misc    = event->header.misc;
-	data->id = -1ULL;
 	data->data_src = PERF_MEM_DATA_SRC_NONE;
 	data->vcpu = -1;
 
-- 
2.43.0

[PATCH 6.7 425/713] PCI/AER: Fix rootport attribute paths in ABI docs

[Sasha Levin]

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit 0e7d29a39a546161ea3a49e8e282a43212d7ff68 ]

The 'aer_stats' directory never made it into the sixth and final revision
of the series adding the sysfs AER attributes.

Link: https://lore.kernel.org/r/20240202131635.11405-2-johan+linaro@kernel.org
Link: https://lore.kernel.org/lkml/20180621184822.GB14136@bhelgaas-glaptop.roam.corp.google.com/
Fixes: 12833017e581 ("PCI/AER: Add sysfs attributes for rootport cumulative stats")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 860db53037a58..24087d5fd417a 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -100,19 +100,19 @@ collectors) that are AER capable. These indicate the number of error messages as
 device, so these counters include them and are thus cumulative of all the error
 messages on the PCI hierarchy originating at that root port.
 
-What:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_COR messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_FATAL messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
-- 
2.43.0

[PATCH 6.7 426/713] perf bpf: Clean up the generated/copied vmlinux.h

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@kernel.org>

[ Upstream commit ffd856537b95dd65facb4e0c78ca1cb92c2048ff ]

When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.

We need to remove that when doing a 'make -C tools/perf clean', fix it.

Fixes: b7a2d774c9c5a9a3 ("perf build: Add ability to build with a generated vmlinux.h")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/Makefile.perf | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 058c9aecf6087..af22d539f31e2 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -1148,7 +1148,7 @@ bpf-skel:
 endif # CONFIG_PERF_BPF_SKEL
 
 bpf-skel-clean:
-	$(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS)
+	$(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS) $(SKEL_OUT)/vmlinux.h
 
 clean:: $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBSYMBOL)-clean $(LIBPERF)-clean arm64-sysreg-defs-clean fixdep-clean python-clean bpf-skel-clean tests-coresight-targets-clean
 	$(call QUIET_CLEAN, core-objs)  $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-iostat $(LANG_BINDINGS)
-- 
2.43.0

[PATCH 6.7 427/713] clk: meson: Add missing clocks to axg_clk_regmaps

[Sasha Levin]

From: Igor Prusov <ivprusov@salutedevices.com>

[ Upstream commit ba535bce57e71463a86f8b33a0ea88c26e3a6418 ]

Some clocks were missing from axg_clk_regmaps, which caused kernel panic
during cat /sys/kernel/debug/clk/clk_summary

[   57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc
...
[   57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   57.436900] pc : regmap_read+0x1c/0x88
[   57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0
[   57.445611] sp : ffff800082f1b690
[   57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70
[   57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000
[   57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000
[   57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff
[   57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000
[   57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100
[   57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24
[   57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710
[   57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000
[   57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000
[   57.519615] Call trace:
[   57.522030]  regmap_read+0x1c/0x88
[   57.525393]  clk_regmap_gate_is_enabled+0x3c/0xb0
[   57.530050]  clk_core_is_enabled+0x44/0x120
[   57.534190]  clk_summary_show_subtree+0x154/0x2f0
[   57.538847]  clk_summary_show_subtree+0x220/0x2f0
[   57.543505]  clk_summary_show_subtree+0x220/0x2f0
[   57.548162]  clk_summary_show_subtree+0x220/0x2f0
[   57.552820]  clk_summary_show_subtree+0x220/0x2f0
[   57.557477]  clk_summary_show_subtree+0x220/0x2f0
[   57.562135]  clk_summary_show_subtree+0x220/0x2f0
[   57.566792]  clk_summary_show_subtree+0x220/0x2f0
[   57.571450]  clk_summary_show+0x84/0xb8
[   57.575245]  seq_read_iter+0x1bc/0x4b8
[   57.578954]  seq_read+0x8c/0xd0
[   57.582059]  full_proxy_read+0x68/0xc8
[   57.585767]  vfs_read+0xb0/0x268
[   57.588959]  ksys_read+0x70/0x108
[   57.592236]  __arm64_sys_read+0x24/0x38
[   57.596031]  invoke_syscall+0x50/0x128
[   57.599740]  el0_svc_common.constprop.0+0x48/0xf8
[   57.604397]  do_el0_svc+0x28/0x40
[   57.607675]  el0_svc+0x34/0xb8
[   57.610694]  el0t_64_sync_handler+0x13c/0x158
[   57.615006]  el0t_64_sync+0x190/0x198
[   57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00)
[   57.624668] ---[ end trace 0000000000000000 ]---

[jbrunet: add missing Fixes tag]
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Link: https://lore.kernel.org/r/20240202172537.1.I64656c75d84284bc91e6126b50b33c502be7c42a@changeid
Fixes: 14ebb3154b8f ("clk: meson: axg: add Video Clocks")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/axg.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index c12f81dfa6745..5f60f2bcca592 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -2142,7 +2142,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
 	&axg_vclk_input,
 	&axg_vclk2_input,
 	&axg_vclk_div,
+	&axg_vclk_div1,
 	&axg_vclk2_div,
+	&axg_vclk2_div1,
 	&axg_vclk_div2_en,
 	&axg_vclk_div4_en,
 	&axg_vclk_div6_en,
-- 
2.43.0

[PATCH 6.7 428/713] media: em28xx: annotate unchecked call to media_device_register()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit fd61d77a3d28444b2635f0c8b5a2ecd6a4d94026 ]

Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.

Add a comment above the call to prevent future unnecessary changes.

Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 4d037c92af7c5..bae76023cf71d 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4094,6 +4094,10 @@ static int em28xx_usb_probe(struct usb_interface *intf,
 	 * topology will likely change after the load of the em28xx subdrivers.
 	 */
 #ifdef CONFIG_MEDIA_CONTROLLER
+	/*
+	 * No need to check the return value, the device will still be
+	 * usable without media controller API.
+	 */
 	retval = media_device_register(dev->media_dev);
 #endif
 
-- 
2.43.0

[PATCH 6.7 429/713] media: v4l2-tpg: fix some memleaks in tpg_alloc

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8cf9c5051076e0eb958f4361d50d8b0c3ee6691c ]

In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.

Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c | 52 +++++++++++++++----
 1 file changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
index a366566f22c3b..642c48e8c1f58 100644
--- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
+++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
@@ -113,6 +113,7 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 {
 	unsigned pat;
 	unsigned plane;
+	int ret = 0;
 
 	tpg->max_line_width = max_w;
 	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++) {
@@ -121,14 +122,18 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 			tpg->lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 			if (plane == 0)
 				continue;
 			tpg->downsampled_lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->downsampled_lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->downsampled_lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 		}
 	}
 	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
@@ -136,18 +141,45 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 		tpg->contrast_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->contrast_line[plane])
-			return -ENOMEM;
+		if (!tpg->contrast_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->black_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->black_line[plane])
-			return -ENOMEM;
+		if (!tpg->black_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->random_line[plane] =
 			vzalloc(array3_size(max_w, 2, pixelsz));
-		if (!tpg->random_line[plane])
-			return -ENOMEM;
+		if (!tpg->random_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 	}
 	return 0;
+
+free_contrast_line:
+	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+		vfree(tpg->contrast_line[plane]);
+		vfree(tpg->black_line[plane]);
+		vfree(tpg->random_line[plane]);
+		tpg->contrast_line[plane] = NULL;
+		tpg->black_line[plane] = NULL;
+		tpg->random_line[plane] = NULL;
+	}
+free_lines:
+	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++)
+		for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+			vfree(tpg->lines[pat][plane]);
+			tpg->lines[pat][plane] = NULL;
+			if (plane == 0)
+				continue;
+			vfree(tpg->downsampled_lines[pat][plane]);
+			tpg->downsampled_lines[pat][plane] = NULL;
+		}
+	return ret;
 }
 EXPORT_SYMBOL_GPL(tpg_alloc);
 
-- 
2.43.0

[PATCH 6.7 430/713] media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8f94b49a5b5d386c038e355bef6347298aabd211 ]

The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.

Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-mem2mem.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index 0cc30397fbad5..8db9ac9c1433f 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -1084,11 +1084,17 @@ static int v4l2_m2m_register_entity(struct media_device *mdev,
 	entity->function = function;
 
 	ret = media_entity_pads_init(entity, num_pads, pads);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 	ret = media_device_register_entity(mdev, entity);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 
 	return 0;
 }
-- 
2.43.0

[PATCH 6.7 431/713] mtd: spinand: esmt: Extend IDs to 5 bytes

[Sasha Levin]

From: Ezra Buehler <ezra.buehler@husqvarnagroup.com>

[ Upstream commit 4bd14b2fd8a83a2f5220ba4ef323f741e11bfdfd ]

According to the datasheets, the ESMT chips in question will return a 5
byte long identification code where the last 3 bytes are the JEDEC
continuation codes (7Fh). Although, I would have expected 4 continuation
codes as Powerchip Semiconductor (C8h, corresponding to the parameter
page data) is located in bank 5 of the JEDEC database.

By matching the full 5 bytes we can avoid clashes with GigaDevice NAND
flashes.

This fix allows the MT7688-based GARDENA smart Gateway to boot again.

Fixes: aa08bf187f32 ("mtd: spinand: esmt: add support for F50D2G41KA")
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Reviewed-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Tested-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-3-ezra@easyb.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/spi/esmt.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/spi/esmt.c b/drivers/mtd/nand/spi/esmt.c
index 31c439a557b18..4597a82de23a4 100644
--- a/drivers/mtd/nand/spi/esmt.c
+++ b/drivers/mtd/nand/spi/esmt.c
@@ -104,7 +104,8 @@ static const struct mtd_ooblayout_ops f50l1g41lb_ooblayout = {
 
 static const struct spinand_info esmt_c8_spinand_table[] = {
 	SPINAND_INFO("F50L1G41LB",
-		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01),
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01, 0x7f,
+				0x7f, 0x7f),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -113,7 +114,8 @@ static const struct spinand_info esmt_c8_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
 	SPINAND_INFO("F50D1G41LB",
-		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11),
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11, 0x7f,
+				0x7f, 0x7f),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -122,7 +124,8 @@ static const struct spinand_info esmt_c8_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
 	SPINAND_INFO("F50D2G41KA",
-		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51, 0x7f,
+				0x7f, 0x7f),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-- 
2.43.0

[PATCH 6.7 432/713] media: edia: dvbdev: fix a use-after-free

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5 ]

In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:

budget_register
  |-> dvb_dmxdev_init
        |-> dvb_register_device
  |-> dvb_dmxdev_release
        |-> dvb_unregister_device
              |-> dvb_remove_device
                    |-> dvb_device_put
                          |-> kref_put

When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.

Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b61901024776 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 49f0eb7d0b9d3..733d0bc4b4cc3 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -490,6 +490,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
 		if (!dvbdevfops) {
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -498,6 +499,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		if (!new_node) {
 			kfree(dvbdevfops);
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -531,6 +533,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		}
 		list_del(&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);
 		return -EINVAL;
@@ -553,6 +556,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del(&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
@@ -571,6 +575,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del(&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return PTR_ERR(clsdev);
 	}
-- 
2.43.0

[PATCH 6.7 433/713] pinctrl: mediatek: Drop bogus slew rate register range for MT8186

[Sasha Levin]

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit 3a29c87548809405bcbc66acc69cbe6f15184d94 ]

The MT8186 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.

Drop the bogus setting.

Fixes: 8b483bda1e46 ("pinctrl: add pinctrl driver on mt8186")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-mt8186.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8186.c b/drivers/pinctrl/mediatek/pinctrl-mt8186.c
index a02f7c3269707..09edcf47effec 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8186.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8186.c
@@ -1198,7 +1198,6 @@ static const struct mtk_pin_reg_calc mt8186_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8186_pin_dir_range),
 	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8186_pin_di_range),
 	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8186_pin_do_range),
-	[PINCTRL_PIN_REG_SR] = MTK_RANGE(mt8186_pin_dir_range),
 	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8186_pin_smt_range),
 	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8186_pin_ies_range),
 	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8186_pin_pu_range),
-- 
2.43.0

[PATCH 6.7 434/713] pinctrl: mediatek: Drop bogus slew rate register range for MT8192

[Sasha Levin]

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit e15ab05a6b3ed42f2f43f8bd1a1abdbde64afecd ]

The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.

Drop the bogus setting.

Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-mt8192.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index dee1b3aefd36e..bf5788d6810ff 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1379,7 +1379,6 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8192_pin_dir_range),
 	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8192_pin_di_range),
 	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8192_pin_do_range),
-	[PINCTRL_PIN_REG_SR] = MTK_RANGE(mt8192_pin_dir_range),
 	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8192_pin_smt_range),
 	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8192_pin_ies_range),
 	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8192_pin_pu_range),
-- 
2.43.0

[PATCH 6.7 435/713] drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit cdb637d339572398821204a1142d8d615668f1e9 ]

The issue arises when the array 'adev->vcn.vcn_config' is accessed
before checking if the index 'adev->vcn.num_vcn_inst' is within the
bounds of the array.

The fix involves moving the bounds check before the array access. This
ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array
before it is used as an index.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.

Fixes: a0ccc717c4ab ("drm/amdgpu/discovery: validate VCN and SDMA instances")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
index c7d60dd0fb975..4f9900779ef9e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
@@ -1278,11 +1278,10 @@ static int amdgpu_discovery_reg_base_init(struct amdgpu_device *adev)
 				 *     0b10 : encode is disabled
 				 *     0b01 : decode is disabled
 				 */
-				adev->vcn.vcn_config[adev->vcn.num_vcn_inst] =
-					ip->revision & 0xc0;
-				ip->revision &= ~0xc0;
 				if (adev->vcn.num_vcn_inst <
 				    AMDGPU_MAX_VCN_INSTANCES) {
+					adev->vcn.vcn_config[adev->vcn.num_vcn_inst] =
+						ip->revision & 0xc0;
 					adev->vcn.num_vcn_inst++;
 					adev->vcn.inst_mask |=
 						(1U << ip->instance_number);
@@ -1293,6 +1292,7 @@ static int amdgpu_discovery_reg_base_init(struct amdgpu_device *adev)
 						adev->vcn.num_vcn_inst + 1,
 						AMDGPU_MAX_VCN_INSTANCES);
 				}
+				ip->revision &= ~0xc0;
 			}
 			if (le16_to_cpu(ip->hw_id) == SDMA0_HWID ||
 			    le16_to_cpu(ip->hw_id) == SDMA1_HWID ||
-- 
2.43.0

[PATCH 6.7 436/713] clk: qcom: reset: Commonize the de/assert functions

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit eda40d9c583e95e0b6ac69d2950eec10f802e0e8 ]

They do the same thing, except the last argument of the last function
call differs. Commonize them.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index e45e32804d2c7..20d1d35aaf229 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -22,8 +22,8 @@ static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
 	return 0;
 }
 
-static int
-qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id, bool assert)
 {
 	struct qcom_reset_controller *rst;
 	const struct qcom_reset_map *map;
@@ -33,21 +33,17 @@ qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
+	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
 }
 
-static int
-qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 {
-	struct qcom_reset_controller *rst;
-	const struct qcom_reset_map *map;
-	u32 mask;
-
-	rst = to_qcom_reset_controller(rcdev);
-	map = &rst->reset_map[id];
-	mask = map->bitmask ? map->bitmask : BIT(map->bit);
+	return qcom_reset_set_assert(rcdev, id, true);
+}
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
+static int qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return qcom_reset_set_assert(rcdev, id, false);
 }
 
 const struct reset_control_ops qcom_reset_ops = {
-- 
2.43.0

[PATCH 6.7 437/713] clk: qcom: reset: Ensure write completion on reset de/assertion

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 2f8cf2c3f3e3f7ef61bd19abb4b0bb797ad50aaf ]

Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.

Read back the value after regmap_update_bits to ensure write completion.

Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index 20d1d35aaf229..d96c96a9089f4 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -33,7 +33,12 @@ static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+	regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+
+	/* Read back the register to ensure write completion, ignore the value */
+	regmap_read(rst->regmap, map->reg, &mask);
+
+	return 0;
 }
 
 static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
-- 
2.43.0

[PATCH 6.7 438/713] quota: Fix potential NULL pointer dereference

[Sasha Levin]

From: Wang Jianjian <wangjianjian3@huawei.com>

[ Upstream commit d0aa72604fbd80c8aabb46eda00535ed35570f1f ]

Below race may cause NULL pointer dereference

P1					P2
dquot_free_inode			quota_off
					  drop_dquot_ref
					   remove_dquot_ref
					   dquots = i_dquot(inode)
  dquots = i_dquot(inode)
  srcu_read_lock
  dquots[cnt]) != NULL (1)
					     dquots[type] = NULL (2)
  spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
   ....

If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.

So let's fix it by using a temporary pointer to avoid this issue.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 98 ++++++++++++++++++++++++++++--------------------
 1 file changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 58b5de081b571..86597a03a8733 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -399,15 +399,17 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquot)
+static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
 {
 	int ret, err, cnt;
+	struct dquot *dquot;
 
 	ret = err = 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquot[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot)
 			/* Even in case of error we have to continue */
-			ret = mark_dquot_dirty(dquot[cnt]);
+			ret = mark_dquot_dirty(dquot);
 		if (!err)
 			err = ret;
 	}
@@ -1678,6 +1680,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
 	struct dquot **dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
 		if (reserve) {
@@ -1697,27 +1700,26 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
 		if (reserve) {
-			ret = dquot_add_space(dquots[cnt], 0, number, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, 0, number, flags, &warn[cnt]);
 		} else {
-			ret = dquot_add_space(dquots[cnt], number, 0, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, number, 0, flags, &warn[cnt]);
 		}
 		if (ret) {
 			/* Back out changes we already did */
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
 				if (reserve)
-					dquot_free_reserved_space(dquots[cnt],
-								  number);
+					dquot_free_reserved_space(dquot, number);
 				else
-					dquot_decr_space(dquots[cnt], number);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+					dquot_decr_space(dquot, number);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			spin_unlock(&inode->i_lock);
 			goto out_flush_warn;
@@ -1748,6 +1750,7 @@ int dquot_alloc_inode(struct inode *inode)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
 		return 0;
@@ -1758,17 +1761,19 @@ int dquot_alloc_inode(struct inode *inode)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		ret = dquot_add_inodes(dquots[cnt], 1, &warn[cnt]);
+		ret = dquot_add_inodes(dquot, 1, &warn[cnt]);
 		if (ret) {
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
 				/* Back out changes we already did */
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquot_decr_inodes(dquots[cnt], 1);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot_decr_inodes(dquot, 1);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			goto warn_put_all;
 		}
@@ -1790,6 +1795,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1805,9 +1811,8 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_rsvspace < number))
 				number = dquot->dq_dqb.dqb_rsvspace;
@@ -1832,6 +1837,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1847,9 +1853,8 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
 				number = dquot->dq_dqb.dqb_curspace;
@@ -1876,6 +1881,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1896,17 +1902,18 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 		int wtype;
 
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_bdq_free(dquots[cnt], number);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_bdq_free(dquot, number);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
+			prepare_warning(&warn[cnt], dquot, wtype);
 		if (reserve)
-			dquot_free_reserved_space(dquots[cnt], number);
+			dquot_free_reserved_space(dquot, number);
 		else
-			dquot_decr_space(dquots[cnt], number);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			dquot_decr_space(dquot, number);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	if (reserve)
 		*inode_reserved_space(inode) -= number;
@@ -1931,6 +1938,7 @@ void dquot_free_inode(struct inode *inode)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 	int index;
 
 	if (!inode_quota_active(inode))
@@ -1941,16 +1949,16 @@ void dquot_free_inode(struct inode *inode)
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		int wtype;
-
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_idq_free(dquots[cnt], 1);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_idq_free(dquot, 1);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
-		dquot_decr_inodes(dquots[cnt], 1);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			prepare_warning(&warn[cnt], dquot, wtype);
+		dquot_decr_inodes(dquot, 1);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	spin_unlock(&inode->i_lock);
 	mark_all_dquot_dirty(dquots);
@@ -1977,7 +1985,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
-	int cnt, ret = 0;
+	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
 	struct dquot_warn warn_to[MAXQUOTAS];
 	struct dquot_warn warn_from_inodes[MAXQUOTAS];
@@ -2066,8 +2074,16 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
 
+	/*
+	 * These arrays are local and we hold dquot references so we don't need
+	 * the srcu protection but still take dquot_srcu to avoid warning in
+	 * mark_all_dquot_dirty().
+	 */
+	index = srcu_read_lock(&dquot_srcu);
 	mark_all_dquot_dirty(transfer_from);
 	mark_all_dquot_dirty(transfer_to);
+	srcu_read_unlock(&dquot_srcu, index);
+
 	flush_warnings(warn_to);
 	flush_warnings(warn_from_inodes);
 	flush_warnings(warn_from_space);
-- 
2.43.0

[PATCH 6.7 439/713] quota: Fix rcu annotations of inode dquot pointers

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 179b8c97ebf63429589f5afeba59a181fe70603e ]

Dquot pointers in i_dquot array in the inode are protected by
dquot_srcu. Annotate the array pointers with __rcu, perform the locked
dereferences with srcu_dereference_check() instead of plain reads, and
set the array elements with rcu_assign_pointer().

Fixes: b9ba6f94b238 ("quota: remove dqptr_sem")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402061900.rTuYDlo6-lkp@intel.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 66 ++++++++++++++++++++++++++++--------------------
 1 file changed, 39 insertions(+), 27 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 86597a03a8733..6509aae445582 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -399,7 +399,7 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
+static inline int mark_all_dquot_dirty(struct dquot __rcu * const *dquots)
 {
 	int ret, err, cnt;
 	struct dquot *dquot;
@@ -1000,14 +1000,15 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)
 }
 EXPORT_SYMBOL(dqget);
 
-static inline struct dquot **i_dquot(struct inode *inode)
+static inline struct dquot __rcu **i_dquot(struct inode *inode)
 {
-	return inode->i_sb->s_op->get_dquots(inode);
+	/* Force __rcu for now until filesystems are fixed */
+	return (struct dquot __rcu **)inode->i_sb->s_op->get_dquots(inode);
 }
 
 static int dqinit_needed(struct inode *inode, int type)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1097,14 +1098,16 @@ static void remove_dquot_ref(struct super_block *sb, int type)
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
-			struct dquot **dquots = i_dquot(inode);
-			struct dquot *dquot = dquots[type];
+			struct dquot __rcu **dquots = i_dquot(inode);
+			struct dquot *dquot = srcu_dereference_check(
+				dquots[type], &dquot_srcu,
+				lockdep_is_held(&dq_data_lock));
 
 #ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
 #endif
-			dquots[type] = NULL;
+			rcu_assign_pointer(dquots[type], NULL);
 			if (dquot)
 				dqput(dquot);
 		}
@@ -1457,7 +1460,8 @@ static int inode_quota_active(const struct inode *inode)
 static int __dquot_initialize(struct inode *inode, int type)
 {
 	int cnt, init_needed = 0;
-	struct dquot **dquots, *got[MAXQUOTAS] = {};
+	struct dquot __rcu **dquots;
+	struct dquot *got[MAXQUOTAS] = {};
 	struct super_block *sb = inode->i_sb;
 	qsize_t rsv;
 	int ret = 0;
@@ -1532,7 +1536,7 @@ static int __dquot_initialize(struct inode *inode, int type)
 		if (!got[cnt])
 			continue;
 		if (!dquots[cnt]) {
-			dquots[cnt] = got[cnt];
+			rcu_assign_pointer(dquots[cnt], got[cnt]);
 			got[cnt] = NULL;
 			/*
 			 * Make quota reservation system happy if someone
@@ -1540,12 +1544,16 @@ static int __dquot_initialize(struct inode *inode, int type)
 			 */
 			rsv = inode_get_rsv_space(inode);
 			if (unlikely(rsv)) {
+				struct dquot *dquot = srcu_dereference_check(
+					dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+
 				spin_lock(&inode->i_lock);
 				/* Get reservation again under proper lock */
 				rsv = __inode_get_rsv_space(inode);
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquots[cnt]->dq_dqb.dqb_rsvspace += rsv;
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot->dq_dqb.dqb_rsvspace += rsv;
+				spin_unlock(&dquot->dq_dqb_lock);
 				spin_unlock(&inode->i_lock);
 			}
 		}
@@ -1567,7 +1575,7 @@ EXPORT_SYMBOL(dquot_initialize);
 
 bool dquot_initialize_needed(struct inode *inode)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	int i;
 
 	if (!inode_quota_active(inode))
@@ -1592,13 +1600,14 @@ EXPORT_SYMBOL(dquot_initialize_needed);
 static void __dquot_drop(struct inode *inode)
 {
 	int cnt;
-	struct dquot **dquots = i_dquot(inode);
+	struct dquot __rcu **dquots = i_dquot(inode);
 	struct dquot *put[MAXQUOTAS];
 
 	spin_lock(&dq_data_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		put[cnt] = dquots[cnt];
-		dquots[cnt] = NULL;
+		put[cnt] = srcu_dereference_check(dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+		rcu_assign_pointer(dquots[cnt], NULL);
 	}
 	spin_unlock(&dq_data_lock);
 	dqput_all(put);
@@ -1606,7 +1615,7 @@ static void __dquot_drop(struct inode *inode)
 
 void dquot_drop(struct inode *inode)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1679,7 +1688,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
@@ -1749,7 +1758,7 @@ int dquot_alloc_inode(struct inode *inode)
 {
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
@@ -1794,7 +1803,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
  */
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1836,7 +1845,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
  */
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1880,7 +1889,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
@@ -1937,7 +1946,7 @@ void dquot_free_inode(struct inode *inode)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 	int index;
 
@@ -1984,6 +1993,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t cur_space;
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
+	struct dquot __rcu **dquots;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
 	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
@@ -2016,6 +2026,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	}
 	cur_space = __inode_get_bytes(inode);
 	rsv_space = __inode_get_rsv_space(inode);
+	dquots = i_dquot(inode);
 	/*
 	 * Build the transfer_from list, check limits, and update usage in
 	 * the target structures.
@@ -2030,7 +2041,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 		if (!sb_has_quota_active(inode->i_sb, cnt))
 			continue;
 		is_valid[cnt] = 1;
-		transfer_from[cnt] = i_dquot(inode)[cnt];
+		transfer_from[cnt] = srcu_dereference_check(dquots[cnt],
+				&dquot_srcu, lockdep_is_held(&dq_data_lock));
 		ret = dquot_add_inodes(transfer_to[cnt], inode_usage,
 				       &warn_to[cnt]);
 		if (ret)
@@ -2069,7 +2081,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 						  rsv_space);
 			spin_unlock(&transfer_from[cnt]->dq_dqb_lock);
 		}
-		i_dquot(inode)[cnt] = transfer_to[cnt];
+		rcu_assign_pointer(dquots[cnt], transfer_to[cnt]);
 	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
@@ -2080,8 +2092,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	 * mark_all_dquot_dirty().
 	 */
 	index = srcu_read_lock(&dquot_srcu);
-	mark_all_dquot_dirty(transfer_from);
-	mark_all_dquot_dirty(transfer_to);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_from);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_to);
 	srcu_read_unlock(&dquot_srcu, index);
 
 	flush_warnings(warn_to);
-- 
2.43.0

[PATCH 6.7 440/713] quota: Properly annotate i_dquot arrays with __rcu

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit ccb49011bb2ebfd66164dbf68c5bff48917bb5ef ]

Dquots pointed to from i_dquot arrays in inodes are protected by
dquot_srcu. Annotate them as such and change .get_dquots callback to
return properly annotated pointer to make sparse happy.

Fixes: b9ba6f94b238 ("quota: remove dqptr_sem")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/ext2.h           | 2 +-
 fs/ext2/super.c          | 2 +-
 fs/ext4/ext4.h           | 2 +-
 fs/ext4/super.c          | 2 +-
 fs/f2fs/f2fs.h           | 2 +-
 fs/f2fs/super.c          | 2 +-
 fs/jfs/jfs_incore.h      | 2 +-
 fs/jfs/super.c           | 2 +-
 fs/ocfs2/inode.h         | 2 +-
 fs/ocfs2/super.c         | 2 +-
 fs/quota/dquot.c         | 3 +--
 fs/reiserfs/reiserfs.h   | 2 +-
 fs/reiserfs/super.c      | 2 +-
 include/linux/fs.h       | 2 +-
 include/linux/shmem_fs.h | 2 +-
 mm/shmem.c               | 2 +-
 16 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 677a9ad45dcb7..f38bdd46e4f77 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -674,7 +674,7 @@ struct ext2_inode_info {
 	struct inode	vfs_inode;
 	struct list_head i_orphan;	/* unlinked but open inodes */
 #ifdef CONFIG_QUOTA
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 #endif
 };
 
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 01f9addc8b1f6..6d8587505cea3 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -320,7 +320,7 @@ static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data, siz
 static ssize_t ext2_quota_write(struct super_block *sb, int type, const char *data, size_t len, loff_t off);
 static int ext2_quota_on(struct super_block *sb, int type, int format_id,
 			 const struct path *path);
-static struct dquot **ext2_get_dquots(struct inode *inode)
+static struct dquot __rcu **ext2_get_dquots(struct inode *inode)
 {
 	return EXT2_I(inode)->i_dquot;
 }
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index a5d784872303d..3205d46bc9673 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1156,7 +1156,7 @@ struct ext4_inode_info {
 	tid_t i_datasync_tid;
 
 #ifdef CONFIG_QUOTA
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 #endif
 
 	/* Precomputed uuid+inum+igen checksum for seeding inode checksums */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index c5fcf377ab1fa..3f1fa5d182e24 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1600,7 +1600,7 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type,
 static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
 			     unsigned int flags);
 
-static struct dquot **ext4_get_dquots(struct inode *inode)
+static struct dquot __rcu **ext4_get_dquots(struct inode *inode)
 {
 	return EXT4_I(inode)->i_dquot;
 }
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 9043cedfa12ba..46ad7604a8b62 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -824,7 +824,7 @@ struct f2fs_inode_info {
 	spinlock_t i_size_lock;		/* protect last_disk_size */
 
 #ifdef CONFIG_QUOTA
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 
 	/* quota space reservation, managed internally by quota code */
 	qsize_t i_reserved_quota;
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 5dfbc6b4c0ac8..b0d6a643c9ef1 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2776,7 +2776,7 @@ int f2fs_dquot_initialize(struct inode *inode)
 	return dquot_initialize(inode);
 }
 
-static struct dquot **f2fs_get_dquots(struct inode *inode)
+static struct dquot __rcu **f2fs_get_dquots(struct inode *inode)
 {
 	return F2FS_I(inode)->i_dquot;
 }
diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h
index dd4264aa9bedd..10934f9a11be3 100644
--- a/fs/jfs/jfs_incore.h
+++ b/fs/jfs/jfs_incore.h
@@ -92,7 +92,7 @@ struct jfs_inode_info {
 		} link;
 	} u;
 #ifdef CONFIG_QUOTA
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 #endif
 	u32 dev;	/* will die when we get wide dev_t */
 	struct inode	vfs_inode;
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 8d8e556bd6104..ff135a43b5b7b 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -824,7 +824,7 @@ static ssize_t jfs_quota_write(struct super_block *sb, int type,
 	return len - towrite;
 }
 
-static struct dquot **jfs_get_dquots(struct inode *inode)
+static struct dquot __rcu **jfs_get_dquots(struct inode *inode)
 {
 	return JFS_IP(inode)->i_dquot;
 }
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index 82b28fdacc7e9..accf03d4765ed 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -65,7 +65,7 @@ struct ocfs2_inode_info
 	tid_t i_sync_tid;
 	tid_t i_datasync_tid;
 
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 };
 
 /*
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 6b906424902b4..1259fe02cd53b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -122,7 +122,7 @@ static int ocfs2_susp_quotas(struct ocfs2_super *osb, int unsuspend);
 static int ocfs2_enable_quotas(struct ocfs2_super *osb);
 static void ocfs2_disable_quotas(struct ocfs2_super *osb);
 
-static struct dquot **ocfs2_get_dquots(struct inode *inode)
+static struct dquot __rcu **ocfs2_get_dquots(struct inode *inode)
 {
 	return OCFS2_I(inode)->i_dquot;
 }
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 6509aae445582..6f2fa7889daf3 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1002,8 +1002,7 @@ EXPORT_SYMBOL(dqget);
 
 static inline struct dquot __rcu **i_dquot(struct inode *inode)
 {
-	/* Force __rcu for now until filesystems are fixed */
-	return (struct dquot __rcu **)inode->i_sb->s_op->get_dquots(inode);
+	return inode->i_sb->s_op->get_dquots(inode);
 }
 
 static int dqinit_needed(struct inode *inode, int type)
diff --git a/fs/reiserfs/reiserfs.h b/fs/reiserfs/reiserfs.h
index 725667880e626..b65549164590c 100644
--- a/fs/reiserfs/reiserfs.h
+++ b/fs/reiserfs/reiserfs.h
@@ -97,7 +97,7 @@ struct reiserfs_inode_info {
 	struct rw_semaphore i_xattr_sem;
 #endif
 #ifdef CONFIG_QUOTA
-	struct dquot *i_dquot[MAXQUOTAS];
+	struct dquot __rcu *i_dquot[MAXQUOTAS];
 #endif
 
 	struct inode vfs_inode;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 67b5510beded2..7b3d5aeb2a6fe 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -802,7 +802,7 @@ static ssize_t reiserfs_quota_write(struct super_block *, int, const char *,
 static ssize_t reiserfs_quota_read(struct super_block *, int, char *, size_t,
 				   loff_t);
 
-static struct dquot **reiserfs_get_dquots(struct inode *inode)
+static struct dquot __rcu **reiserfs_get_dquots(struct inode *inode)
 {
 	return REISERFS_I(inode)->i_dquot;
 }
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 98c718b0fe532..3226a1d47be11 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2084,7 +2084,7 @@ struct super_operations {
 #ifdef CONFIG_QUOTA
 	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
-	struct dquot **(*get_dquots)(struct inode *);
+	struct dquot __rcu **(*get_dquots)(struct inode *);
 #endif
 	long (*nr_cached_objects)(struct super_block *,
 				  struct shrink_control *);
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index 2caa6b86106aa..66828dfc6e74e 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -37,7 +37,7 @@ struct shmem_inode_info {
 	unsigned int		fsflags;	/* for FS_IOC_[SG]ETFLAGS */
 	atomic_t		stop_eviction;	/* hold when working on inode */
 #ifdef CONFIG_TMPFS_QUOTA
-	struct dquot		*i_dquot[MAXQUOTAS];
+	struct dquot __rcu	*i_dquot[MAXQUOTAS];
 #endif
 	struct inode		vfs_inode;
 };
diff --git a/mm/shmem.c b/mm/shmem.c
index 0d1ce70bce380..fb2daf89e2f2a 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -310,7 +310,7 @@ static void shmem_disable_quotas(struct super_block *sb)
 		dquot_quota_off(sb, type);
 }
 
-static struct dquot **shmem_get_dquots(struct inode *inode)
+static struct dquot __rcu **shmem_get_dquots(struct inode *inode)
 {
 	return SHMEM_I(inode)->i_dquot;
 }
-- 
2.43.0

[PATCH 6.7 441/713] PCI/P2PDMA: Fix a sleeping issue in a RCU read section

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 1e5c66afd4a40bb7be17cb33cbb1a1085f727730 ]

It is not allowed to sleep within a RCU read section, so use GFP_ATOMIC
instead of GFP_KERNEL here.

Link: https://lore.kernel.org/r/02d9ec4a10235def0e764ff1f5be881ba12e16e8.1704397858.git.christophe.jaillet@wanadoo.fr
Fixes: ae21f835a5bd ("PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/p2pdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index 0c361561b855c..4f47a13cb500f 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -661,7 +661,7 @@ calc_map_type_and_dist(struct pci_dev *provider, struct pci_dev *client,
 	p2pdma = rcu_dereference(provider->p2pdma);
 	if (p2pdma)
 		xa_store(&p2pdma->map_types, map_types_idx(client),
-			 xa_mk_value(map_type), GFP_KERNEL);
+			 xa_mk_value(map_type), GFP_ATOMIC);
 	rcu_read_unlock();
 	return map_type;
 }
-- 
2.43.0

[PATCH 6.7 442/713] PCI: switchtec: Fix an error handling path in switchtec_pci_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit dec529b0b0572b32f9eb91c882dd1f08ca657efb ]

The commit in Fixes changed the logic on how resources are released and
introduced a new switchtec_exit_pci() that need to be called explicitly in
order to undo a corresponding switchtec_init_pci().

This was done in the remove function, but not in the probe.

Fix the probe now.

Fixes: df25461119d9 ("PCI: switchtec: Fix stdev_release() crash after surprise hot remove")
Link: https://lore.kernel.org/r/01446d2ccb91a578239915812f2b7dfbeb2882af.1703428183.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 1804794d0e686..5a4adf6c04cf8 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1672,7 +1672,7 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 	rc = switchtec_init_isr(stdev);
 	if (rc) {
 		dev_err(&stdev->dev, "failed to init isr.\n");
-		goto err_put;
+		goto err_exit_pci;
 	}
 
 	iowrite32(SWITCHTEC_EVENT_CLEAR |
@@ -1693,6 +1693,8 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 
 err_devadd:
 	stdev_kill(stdev);
+err_exit_pci:
+	switchtec_exit_pci(stdev);
 err_put:
 	ida_free(&switchtec_minor_ida, MINOR(stdev->dev.devt));
 	put_device(&stdev->dev);
-- 
2.43.0

[PATCH 6.7 443/713] crypto: xilinx - call finalize with bh disabled

[Sasha Levin]

From: Quanyang Wang <quanyang.wang@windriver.com>

[ Upstream commit a853450bf4c752e664abab0b2fad395b7ad7701c ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard #323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d48131 ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/xilinx/zynqmp-aes-gcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/xilinx/zynqmp-aes-gcm.c b/drivers/crypto/xilinx/zynqmp-aes-gcm.c
index 3c205324b22b6..e614057188409 100644
--- a/drivers/crypto/xilinx/zynqmp-aes-gcm.c
+++ b/drivers/crypto/xilinx/zynqmp-aes-gcm.c
@@ -231,7 +231,10 @@ static int zynqmp_handle_aes_req(struct crypto_engine *engine,
 		err = zynqmp_aes_aead_cipher(areq);
 	}
 
+	local_bh_disable();
 	crypto_finalize_aead_request(engine, areq, err);
+	local_bh_enable();
+
 	return 0;
 }
 
-- 
2.43.0

[PATCH 6.7 444/713] drivers/ps3: select VIDEO to provide cmdline functions

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 7edd06233958d9086a9e3eb723a8768d3c5a9ce1 ]

When VIDEO is not set, there is a build error. Fix that by selecting
VIDEO for PS3_PS3AV.

ERROR: modpost: ".video_get_options" [drivers/ps3/ps3av_mod.ko] undefined!

Fixes: dae7fbf43fd0 ("driver/ps3: Include <video/cmdline.h> for mode parsing")
Fixes: a3b6792e990d ("video/cmdline: Introduce CONFIG_VIDEO for video= parameter")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207161322.8073-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/ps3/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a44869e5ea70f..1bd1b0b49bc62 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -67,6 +67,7 @@ config PS3_VUART
 config PS3_PS3AV
 	depends on PPC_PS3
 	tristate "PS3 AV settings driver" if PS3_ADVANCED
+	select VIDEO
 	select PS3_VUART
 	default y
 	help
-- 
2.43.0

[PATCH 6.7 444/713] drivers/ps3: select VIDEO to provide cmdline functions

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 7edd06233958d9086a9e3eb723a8768d3c5a9ce1 ]

When VIDEO is not set, there is a build error. Fix that by selecting
VIDEO for PS3_PS3AV.

ERROR: modpost: ".video_get_options" [drivers/ps3/ps3av_mod.ko] undefined!

Fixes: dae7fbf43fd0 ("driver/ps3: Include <video/cmdline.h> for mode parsing")
Fixes: a3b6792e990d ("video/cmdline: Introduce CONFIG_VIDEO for video= parameter")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207161322.8073-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/ps3/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a44869e5ea70f..1bd1b0b49bc62 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -67,6 +67,7 @@ config PS3_VUART
 config PS3_PS3AV
 	depends on PPC_PS3
 	tristate "PS3 AV settings driver" if PS3_ADVANCED
+	select VIDEO
 	select PS3_VUART
 	default y
 	help
-- 
2.43.0

[PATCH 6.7 445/713] perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 1eb3d924e3c0b8c27388b0583a989d757866efb6 ]

slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().

Fixes: b52956c961be3a04 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/thread_map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/thread_map.c b/tools/perf/util/thread_map.c
index e848579e61a86..ea3b431b97830 100644
--- a/tools/perf/util/thread_map.c
+++ b/tools/perf/util/thread_map.c
@@ -280,13 +280,13 @@ struct perf_thread_map *thread_map__new_by_tid_str(const char *tid_str)
 		threads->nr = ntasks;
 	}
 out:
+	strlist__delete(slist);
 	if (threads)
 		refcount_set(&threads->refcnt, 1);
 	return threads;
 
 out_free_threads:
 	zfree(&threads);
-	strlist__delete(slist);
 	goto out;
 }
 
-- 
2.43.0

[PATCH 6.7 446/713] perf srcline: Add missed addr2line closes

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit c7ba9d18ae47924a6ea6a47ca139779f58eb83c0 ]

The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.

Fixes: b3801e791231 ("perf srcline: Simplify addr2line subprocess")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/srcline.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/util/srcline.c b/tools/perf/util/srcline.c
index 034b496df2978..7addc34afcf5d 100644
--- a/tools/perf/util/srcline.c
+++ b/tools/perf/util/srcline.c
@@ -399,6 +399,8 @@ static void addr2line_subprocess_cleanup(struct child_process *a2l)
 		kill(a2l->pid, SIGKILL);
 		finish_command(a2l); /* ignore result, we don't care */
 		a2l->pid = -1;
+		close(a2l->in);
+		close(a2l->out);
 	}
 
 	free(a2l);
-- 
2.43.0

[PATCH 6.7 447/713] dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible

[Sasha Levin]

From: Adam Skladowski <a39.skl@gmail.com>

[ Upstream commit 3b63880de42bd3cb79c2a99949135a8f2441c088 ]

During conversion 28nm-hpm-fam-b compat got lost, add it.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Fixes: f7d46c5efee2 ("dt-bindings: display/msm: split qcom, mdss bindings")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/575290/
Link: https://lore.kernel.org/r/20240121194221.13513-4-a39.skl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 0999ea07f47bb..e4576546bf0db 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
-- 
2.43.0

[PATCH 6.7 448/713] drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN

[Sasha Levin]

From: Abhinav Kumar <quic_abhinavk@quicinc.com>

[ Upstream commit 2f4a67a3894e15c135125cb54edc5b43abc1b70e ]

Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus but this is incorrect because we should be enabling
this bit independent of widebus except for cases where compression
is enabled in one pixel per clock mode.

Fix this by making the condition checks more explicit and enabling
INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU.

Fixes: 3309a7563971 ("drm/msm/dpu: revise timing engine programming to support widebus feature")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/576722/
Link: https://lore.kernel.org/r/20240201004737.2478-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c       |  7 +++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h       |  7 +++++++
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c  |  1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c       | 15 +++++++++------
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h       |  1 +
 5 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index cf0d44b6e7a30..86bfc109b2fae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -226,6 +226,13 @@ bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc)
 	return dpu_enc->wide_bus_en;
 }
 
+bool dpu_encoder_is_dsc_enabled(const struct drm_encoder *drm_enc)
+{
+	const struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
+
+	return dpu_enc->dsc ? true : false;
+}
+
 int dpu_encoder_get_crc_values_cnt(const struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
index 4c05fd5e9ed18..fe6b1d312a742 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
@@ -158,6 +158,13 @@ int dpu_encoder_get_vsync_count(struct drm_encoder *drm_enc);
 
 bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc);
 
+/**
+ * dpu_encoder_is_dsc_enabled - indicate whether dsc is enabled
+ *				for the encoder.
+ * @drm_enc:    Pointer to previously created drm encoder structure
+ */
+bool dpu_encoder_is_dsc_enabled(const struct drm_encoder *drm_enc);
+
 /**
  * dpu_encoder_get_crc_values_cnt - get number of physical encoders contained
  *	in virtual encoder that can collect CRC values
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index eeb0acf9665e8..2b20ff720c130 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -100,6 +100,7 @@ static void drm_mode_to_intf_timing_params(
 	}
 
 	timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
+	timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
 
 	/*
 	 * for DP, divide the horizonal parameters by 2 when
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 27b9373cd7846..b3d6cf97830dc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -161,13 +161,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
 
-	/*
-	 * DATA_HCTL_EN controls data timing which can be different from
-	 * video timing. It is recommended to enable it for all cases, except
-	 * if compression is enabled in 1 pixel per clock mode
-	 */
 	if (p->wide_bus_en)
-		intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN | INTF_CFG2_DATA_HCTL_EN;
+		intf_cfg2 |= INTF_CFG2_DATABUS_WIDEN;
 
 	data_width = p->width;
 
@@ -227,6 +222,14 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
 	DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
 	if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
+		/*
+		 * DATA_HCTL_EN controls data timing which can be different from
+		 * video timing. It is recommended to enable it for all cases, except
+		 * if compression is enabled in 1 pixel per clock mode
+		 */
+		if (!(p->compression_en && !p->wide_bus_en))
+			intf_cfg2 |= INTF_CFG2_DATA_HCTL_EN;
+
 		DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
 		DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
 		DPU_REG_WRITE(c, INTF_ACTIVE_DATA_HCTL, active_data_hctl);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
index 66a5603dc7eda..366fd87e26c74 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -33,6 +33,7 @@ struct dpu_hw_intf_timing_params {
 	u32 hsync_skew;
 
 	bool wide_bus_en;
+	bool compression_en;
 };
 
 struct dpu_hw_intf_prog_fetch {
-- 
2.43.0

[PATCH 6.7 449/713] drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled

[Sasha Levin]

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 06267d22f9ee6fd34150b6dcdb2fa6983e1a85bc ]

When the topology calls for two interfaces on the current fixed topology
of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280
with only one DSC block), there should be no merging of DSC output.

This is already represented by the return value of
dpu_encoder_use_dsc_merge(), but not yet used to correctly configure
this flag.

Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577067/
Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 86bfc109b2fae..b26d23b2ab6af 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1867,7 +1867,9 @@ static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
 	dsc_common_mode = 0;
 	pic_width = dsc->pic_width;
 
-	dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
+	dsc_common_mode = DSC_MODE_SPLIT_PANEL;
+	if (dpu_encoder_use_dsc_merge(enc_master->parent))
+		dsc_common_mode |= DSC_MODE_MULTIPLEX;
 	if (enc_master->intf_mode == INTF_MODE_VIDEO)
 		dsc_common_mode |= DSC_MODE_VIDEO;
 
-- 
2.43.0

[PATCH 6.7 450/713] drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit c4891d979c7668b195a0a75787967ec95a24ecef ]

Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size'
during SMC firmware load. Log 'rdev->smc_fw->size' instead.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/ni.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 927e5f42e97d0..3e48cbb522a1c 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -813,7 +813,7 @@ int ni_init_microcode(struct radeon_device *rdev)
 			err = 0;
 		} else if (rdev->smc_fw->size != smc_req_size) {
 			pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n",
-			       rdev->mc_fw->size, fw_name);
+			       rdev->smc_fw->size, fw_name);
 			err = -EINVAL;
 		}
 	}
-- 
2.43.0

[PATCH 6.7 451/713] drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit 2a3cfb9a24a28da9cc13d2c525a76548865e182c ]

Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.

Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c    | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 272c27495ede6..49f0c9454a6e6 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1896,17 +1896,15 @@ static void amdgpu_dm_fini(struct amdgpu_device *adev)
 		adev->dm.hdcp_workqueue = NULL;
 	}
 
-	if (adev->dm.dc)
+	if (adev->dm.dc) {
 		dc_deinit_callbacks(adev->dm.dc);
-
-	if (adev->dm.dc)
 		dc_dmub_srv_destroy(&adev->dm.dc->ctx->dmub_srv);
-
-	if (dc_enable_dmub_notifications(adev->dm.dc)) {
-		kfree(adev->dm.dmub_notify);
-		adev->dm.dmub_notify = NULL;
-		destroy_workqueue(adev->dm.delayed_hpd_wq);
-		adev->dm.delayed_hpd_wq = NULL;
+		if (dc_enable_dmub_notifications(adev->dm.dc)) {
+			kfree(adev->dm.dmub_notify);
+			adev->dm.dmub_notify = NULL;
+			destroy_workqueue(adev->dm.delayed_hpd_wq);
+			adev->dm.delayed_hpd_wq = NULL;
+		}
 	}
 
 	if (adev->dm.dmub_bo)
-- 
2.43.0

[PATCH 6.7 452/713] clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit abb3fa662b8f8eaed1590b0e7a4e19eda467cdd3 ]

According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the
parent clock of the Pin Function (PFC/GPIO) module clocks is the CP
clock.

Fix this by adding the missing CP clock, and correcting the PFC parents.

Fixes: f2afa78d5a0c0b0b ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions")
Fixes: 36ff366033f0dde1 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/r8a779g0-cpg-mssr.c       | 11 ++++++-----
 include/dt-bindings/clock/r8a779g0-cpg-mssr.h |  1 +
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/renesas/r8a779g0-cpg-mssr.c b/drivers/clk/renesas/r8a779g0-cpg-mssr.c
index 7cc580d673626..7999faa9a921b 100644
--- a/drivers/clk/renesas/r8a779g0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779g0-cpg-mssr.c
@@ -22,7 +22,7 @@
 
 enum clk_ids {
 	/* Core Clock Outputs exported to DT */
-	LAST_DT_CORE_CLK = R8A779G0_CLK_R,
+	LAST_DT_CORE_CLK = R8A779G0_CLK_CP,
 
 	/* External Input Clocks */
 	CLK_EXTAL,
@@ -141,6 +141,7 @@ static const struct cpg_core_clk r8a779g0_core_clks[] __initconst = {
 	DEF_FIXED("svd2_vip",	R8A779G0_CLK_SVD2_VIP,	CLK_SV_VIP,	2, 1),
 	DEF_FIXED("cbfusa",	R8A779G0_CLK_CBFUSA,	CLK_EXTAL,	2, 1),
 	DEF_FIXED("cpex",	R8A779G0_CLK_CPEX,	CLK_EXTAL,	2, 1),
+	DEF_FIXED("cp",		R8A779G0_CLK_CP,	CLK_EXTAL,	2, 1),
 	DEF_FIXED("viobus",	R8A779G0_CLK_VIOBUS,	CLK_VIO,	1, 1),
 	DEF_FIXED("viobusd2",	R8A779G0_CLK_VIOBUSD2,	CLK_VIO,	2, 1),
 	DEF_FIXED("vcbus",	R8A779G0_CLK_VCBUS,	CLK_VC,		1, 1),
@@ -230,10 +231,10 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
 	DEF_MOD("cmt1",		911,	R8A779G0_CLK_R),
 	DEF_MOD("cmt2",		912,	R8A779G0_CLK_R),
 	DEF_MOD("cmt3",		913,	R8A779G0_CLK_R),
-	DEF_MOD("pfc0",		915,	R8A779G0_CLK_CL16M),
-	DEF_MOD("pfc1",		916,	R8A779G0_CLK_CL16M),
-	DEF_MOD("pfc2",		917,	R8A779G0_CLK_CL16M),
-	DEF_MOD("pfc3",		918,	R8A779G0_CLK_CL16M),
+	DEF_MOD("pfc0",		915,	R8A779G0_CLK_CP),
+	DEF_MOD("pfc1",		916,	R8A779G0_CLK_CP),
+	DEF_MOD("pfc2",		917,	R8A779G0_CLK_CP),
+	DEF_MOD("pfc3",		918,	R8A779G0_CLK_CP),
 	DEF_MOD("tsc",		919,	R8A779G0_CLK_CL16M),
 	DEF_MOD("ssiu",		2926,	R8A779G0_CLK_S0D6_PER),
 	DEF_MOD("ssi",		2927,	R8A779G0_CLK_S0D6_PER),
diff --git a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
index 754c54a6eb06a..7850cdc62e285 100644
--- a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
+++ b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
@@ -86,5 +86,6 @@
 #define R8A779G0_CLK_CPEX		74
 #define R8A779G0_CLK_CBFUSA		75
 #define R8A779G0_CLK_R			76
+#define R8A779G0_CLK_CP			77
 
 #endif /* __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ */
-- 
2.43.0

[PATCH 6.7 453/713] clk: renesas: r8a779f0: Correct PFC/GPIO parent clock

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit d1b32a83a02d9433dbd8c5f4d6fc44aa597755bd ]

According to the R-Car S4 Series Hardware User’s Manual Rev.0.81, the
parent clock of the Pin Function (PFC/GPIO) module clock is the CP
clock.

As this clock is not documented to exist on R-Car S4, use the CPEX clock
instead.

Fixes: 73421f2a48e6bd1d ("clk: renesas: r8a779f0: Add PFC clock")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f88ec4aede0eaf0107c8bb7b28ba719ac6cd418f.1706197415.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/r8a779f0-cpg-mssr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/r8a779f0-cpg-mssr.c b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
index f721835c7e212..cc06127406ab5 100644
--- a/drivers/clk/renesas/r8a779f0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
@@ -161,7 +161,7 @@ static const struct mssr_mod_clk r8a779f0_mod_clks[] __initconst = {
 	DEF_MOD("cmt1",		911,	R8A779F0_CLK_R),
 	DEF_MOD("cmt2",		912,	R8A779F0_CLK_R),
 	DEF_MOD("cmt3",		913,	R8A779F0_CLK_R),
-	DEF_MOD("pfc0",		915,	R8A779F0_CLK_CL16M),
+	DEF_MOD("pfc0",		915,	R8A779F0_CLK_CPEX),
 	DEF_MOD("tsc",		919,	R8A779F0_CLK_CL16M),
 	DEF_MOD("rswitch2",	1505,	R8A779F0_CLK_RSW2),
 	DEF_MOD("ether-serdes",	1506,	R8A779F0_CLK_S0D2_HSC),
-- 
2.43.0

[PATCH 6.7 454/713] clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux

[Sasha Levin]

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

[ Upstream commit 9b2a11c83859c06233049b134bd8ee974b284559 ]

The status configuration for SD1 mux clock is SEL_SDHI1_STS. Fix it.

Fixes: 16b86e5c03c5 ("clk: renesas: rzg2l: Refactor SD mux driver")
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240131102930.1841901-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/r9a07g043-cpg.c | 2 +-
 drivers/clk/renesas/r9a07g044-cpg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/r9a07g043-cpg.c b/drivers/clk/renesas/r9a07g043-cpg.c
index b70bb378ab469..075ade0925d45 100644
--- a/drivers/clk/renesas/r9a07g043-cpg.c
+++ b/drivers/clk/renesas/r9a07g043-cpg.c
@@ -138,7 +138,7 @@ static const struct cpg_core_clk r9a07g043_core_clks[] __initconst = {
 	DEF_FIXED("SPI1", R9A07G043_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
 	DEF_SD_MUX("SD0", R9A07G043_CLK_SD0, SEL_SDHI0, SEL_SDHI0_STS, sel_shdi,
 		   mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier),
-	DEF_SD_MUX("SD1", R9A07G043_CLK_SD1, SEL_SDHI1, SEL_SDHI0_STS, sel_shdi,
+	DEF_SD_MUX("SD1", R9A07G043_CLK_SD1, SEL_SDHI1, SEL_SDHI1_STS, sel_shdi,
 		   mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier),
 	DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A07G043_CLK_SD0, 1, 4),
 	DEF_FIXED("SD1_DIV4", CLK_SD1_DIV4, R9A07G043_CLK_SD1, 1, 4),
diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 1047278c9079a..bc822b9fd7ce6 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -178,7 +178,7 @@ static const struct {
 		DEF_FIXED("SPI1", R9A07G044_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
 		DEF_SD_MUX("SD0", R9A07G044_CLK_SD0, SEL_SDHI0, SEL_SDHI0_STS, sel_shdi,
 			   mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier),
-		DEF_SD_MUX("SD1", R9A07G044_CLK_SD1, SEL_SDHI1, SEL_SDHI0_STS, sel_shdi,
+		DEF_SD_MUX("SD1", R9A07G044_CLK_SD1, SEL_SDHI1, SEL_SDHI1_STS, sel_shdi,
 			   mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier),
 		DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A07G044_CLK_SD0, 1, 4),
 		DEF_FIXED("SD1_DIV4", CLK_SD1_DIV4, R9A07G044_CLK_SD1, 1, 4),
-- 
2.43.0

[PATCH 6.7 455/713] ALSA: seq: fix function cast warnings

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d7bf73809849463f76de42aad62c850305dd6c5d ]

clang-16 points out a control flow integrity (kcfi) issue when event
callbacks get converted to incompatible types:

sound/core/seq/seq_midi.c:135:30: error: cast from 'int (*)(struct snd_rawmidi_substream *, const char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  135 |                 snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/core/seq/seq_virmidi.c:83:31: error: cast from 'int (*)(struct snd_rawmidi_substream *, const unsigned char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   83 |                         snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
      |                                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For addressing those errors, introduce wrapper functions that are used
for callbacks and bridge to the actual function call with pointer
cast.

The code was originally added with the initial ALSA merge in linux-2.5.4.

[ the patch description shamelessly copied from Arnd's original patch
  -- tiwai ]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213101020.459183-1-arnd@kernel.org
Link: https://lore.kernel.org/r/20240213135343.16411-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_midi.c    | 8 +++++++-
 sound/core/seq/seq_virmidi.c | 9 ++++++++-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index 18320a248aa7d..78dcb0ea15582 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -113,6 +113,12 @@ static int dump_midi(struct snd_rawmidi_substream *substream, const char *buf, i
 	return 0;
 }
 
+/* callback for snd_seq_dump_var_event(), bridging to dump_midi() */
+static int __dump_midi(void *ptr, void *buf, int count)
+{
+	return dump_midi(ptr, buf, count);
+}
+
 static int event_process_midi(struct snd_seq_event *ev, int direct,
 			      void *private_data, int atomic, int hop)
 {
@@ -132,7 +138,7 @@ static int event_process_midi(struct snd_seq_event *ev, int direct,
 			pr_debug("ALSA: seq_midi: invalid sysex event flags = 0x%x\n", ev->flags);
 			return 0;
 		}
-		snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
+		snd_seq_dump_var_event(ev, __dump_midi, substream);
 		snd_midi_event_reset_decode(msynth->parser);
 	} else {
 		if (msynth->parser == NULL)
diff --git a/sound/core/seq/seq_virmidi.c b/sound/core/seq/seq_virmidi.c
index 1b9260108e482..1678737f11be7 100644
--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -62,6 +62,13 @@ static void snd_virmidi_init_event(struct snd_virmidi *vmidi,
 /*
  * decode input event and put to read buffer of each opened file
  */
+
+/* callback for snd_seq_dump_var_event(), bridging to snd_rawmidi_receive() */
+static int dump_to_rawmidi(void *ptr, void *buf, int count)
+{
+	return snd_rawmidi_receive(ptr, buf, count);
+}
+
 static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 					 struct snd_seq_event *ev,
 					 bool atomic)
@@ -80,7 +87,7 @@ static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 		if (ev->type == SNDRV_SEQ_EVENT_SYSEX) {
 			if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
 				continue;
-			snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
+			snd_seq_dump_var_event(ev, dump_to_rawmidi, vmidi->substream);
 			snd_midi_event_reset_decode(vmidi->parser);
 		} else {
 			len = snd_midi_event_decode(vmidi->parser, msg, sizeof(msg), ev);
-- 
2.43.0

[PATCH 6.7 456/713] perf expr: Fix "has_event" function for metric style events

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 6dd76680b925228312756c13b9b983661b552a64 ]

Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.

Fixes: 4a4a9bf9075f ("perf expr: Add has_event function")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/expr.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/expr.c b/tools/perf/util/expr.c
index 7be23b3ac0821..b8875aac8f870 100644
--- a/tools/perf/util/expr.c
+++ b/tools/perf/util/expr.c
@@ -500,7 +500,25 @@ double expr__has_event(const struct expr_parse_ctx *ctx, bool compute_ids, const
 	tmp = evlist__new();
 	if (!tmp)
 		return NAN;
-	ret = parse_event(tmp, id) ? 0 : 1;
+
+	if (strchr(id, '@')) {
+		char *tmp_id, *p;
+
+		tmp_id = strdup(id);
+		if (!tmp_id) {
+			ret = NAN;
+			goto out;
+		}
+		p = strchr(tmp_id, '@');
+		*p = '/';
+		p = strrchr(tmp_id, '@');
+		*p = '/';
+		ret = parse_event(tmp, tmp_id) ? 0 : 1;
+		free(tmp_id);
+	} else {
+		ret = parse_event(tmp, id) ? 0 : 1;
+	}
+out:
 	evlist__delete(tmp);
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 457/713] perf stat: Avoid metric-only segv

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 2543947c77e0e224bda86b4e7220c2f6714da463 ]

Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.

Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index afe6db8e7bf4f..969ce40096330 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -560,7 +560,7 @@ static void print_metric_only(struct perf_stat_config *config,
 	if (color)
 		mlen += strlen(color) + sizeof(PERF_COLOR_RESET) - 1;
 
-	color_snprintf(str, sizeof(str), color ?: "", fmt, val);
+	color_snprintf(str, sizeof(str), color ?: "", fmt ?: "", val);
 	fprintf(out, "%*s ", mlen, str);
 	os->first = false;
 }
-- 
2.43.0

[PATCH 6.7 458/713] perf metric: Don't remove scale from counts

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 6d6be5eb45b423a37d746d3ee0fd0c78f76ead9f ]

Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.

Fixes: 37cc8ad77cf8 ("perf metric: Directly use counts rather than saved_value")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-shadow.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index e31426167852a..cf573ff3fa84f 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -414,12 +414,7 @@ static int prepare_metric(struct evsel **metric_events,
 				val = NAN;
 				source_count = 0;
 			} else {
-				/*
-				 * If an event was scaled during stat gathering,
-				 * reverse the scale before computing the
-				 * metric.
-				 */
-				val = aggr->counts.val * (1.0 / metric_events[i]->scale);
+				val = aggr->counts.val;
 				source_count = evsel__source_count(metric_events[i]);
 			}
 		}
-- 
2.43.0

[PATCH 6.7 459/713] ASoC: meson: aiu: fix function pointer type mismatch

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 98ac85a00f31d2e9d5452b825a9ed0153d934043 ]

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  243 |                                        (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 6ae9ca9ce986 ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/aiu.c | 19 ++++---------------
 sound/soc/meson/aiu.h |  1 -
 2 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c
index 7109b81cc3d0a..5d1419ed7a62d 100644
--- a/sound/soc/meson/aiu.c
+++ b/sound/soc/meson/aiu.c
@@ -212,11 +212,12 @@ static const char * const aiu_spdif_ids[] = {
 static int aiu_clk_get(struct device *dev)
 {
 	struct aiu *aiu = dev_get_drvdata(dev);
+	struct clk *pclk;
 	int ret;
 
-	aiu->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(aiu->pclk))
-		return dev_err_probe(dev, PTR_ERR(aiu->pclk), "Can't get the aiu pclk\n");
+	pclk = devm_clk_get_enabled(dev, "pclk");
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk), "Can't get the aiu pclk\n");
 
 	aiu->spdif_mclk = devm_clk_get(dev, "spdif_mclk");
 	if (IS_ERR(aiu->spdif_mclk))
@@ -233,18 +234,6 @@ static int aiu_clk_get(struct device *dev)
 	if (ret)
 		return dev_err_probe(dev, ret, "Can't get the spdif clocks\n");
 
-	ret = clk_prepare_enable(aiu->pclk);
-	if (ret) {
-		dev_err(dev, "peripheral clock enable failed\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev,
-				       (void(*)(void *))clk_disable_unprepare,
-				       aiu->pclk);
-	if (ret)
-		dev_err(dev, "failed to add reset action on pclk");
-
 	return ret;
 }
 
diff --git a/sound/soc/meson/aiu.h b/sound/soc/meson/aiu.h
index 393b6c2307e49..0f94c8bf60818 100644
--- a/sound/soc/meson/aiu.h
+++ b/sound/soc/meson/aiu.h
@@ -33,7 +33,6 @@ struct aiu_platform_data {
 };
 
 struct aiu {
-	struct clk *pclk;
 	struct clk *spdif_mclk;
 	struct aiu_interface i2s;
 	struct aiu_interface spdif;
-- 
2.43.0

[PATCH 6.7 460/713] ASoC: meson: t9015: fix function pointer type mismatch

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 5ad992c71b6a8e8a547954addc7af9fbde6ca10a ]

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  274 |                         (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 33901f5b9b16 ("ASoC: meson: add t9015 internal DAC driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/t9015.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
index 9c6b4dac68932..571f65788c592 100644
--- a/sound/soc/meson/t9015.c
+++ b/sound/soc/meson/t9015.c
@@ -48,7 +48,6 @@
 #define POWER_CFG	0x10
 
 struct t9015 {
-	struct clk *pclk;
 	struct regulator *avdd;
 };
 
@@ -249,6 +248,7 @@ static int t9015_probe(struct platform_device *pdev)
 	struct t9015 *priv;
 	void __iomem *regs;
 	struct regmap *regmap;
+	struct clk *pclk;
 	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -256,26 +256,14 @@ static int t9015_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, priv);
 
-	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk))
-		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get core clock\n");
+	pclk = devm_clk_get_enabled(dev, "pclk");
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk), "failed to get core clock\n");
 
 	priv->avdd = devm_regulator_get(dev, "AVDD");
 	if (IS_ERR(priv->avdd))
 		return dev_err_probe(dev, PTR_ERR(priv->avdd), "failed to AVDD\n");
 
-	ret = clk_prepare_enable(priv->pclk);
-	if (ret) {
-		dev_err(dev, "core clock enable failed\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev,
-			(void(*)(void *))clk_disable_unprepare,
-			priv->pclk);
-	if (ret)
-		return ret;
-
 	ret = device_reset(dev);
 	if (ret) {
 		dev_err(dev, "reset failed\n");
-- 
2.43.0

[PATCH 6.7 461/713] powerpc: Force inlining of arch_vmap_p{u/m}d_supported()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit c5aebb53b32460bc52680dd4e2a2f6b84d5ea521 ]

arch_vmap_pud_supported() and arch_vmap_pmd_supported() are
expected to constant-fold to false when RADIX is not enabled.

Force inlining in order to avoid following failure which
leads to unexpected call of non-existing pud_set_huge() and
pmd_set_huge() on powerpc 8xx.

In function 'pud_huge_tests',
    inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:1399:2:
./arch/powerpc/include/asm/vmalloc.h:9:33: warning: inlining failed in call to 'arch_vmap_pud_supported.isra': call is unlikely and code size would grow [-Winline]
    9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:10:20: note: in expansion of macro 'arch_vmap_pud_supported'
   10 | static inline bool arch_vmap_pud_supported(pgprot_t prot)
      |                    ^~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/vmalloc.h:9:33: note: called from here
    9 | #define arch_vmap_pud_supported arch_vmap_pud_supported
mm/debug_vm_pgtable.c:458:14: note: in expansion of macro 'arch_vmap_pud_supported'
  458 |         if (!arch_vmap_pud_supported(args->page_prot) ||
      |              ^~~~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402131836.OU1TDuoi-lkp@intel.com/
Fixes: 8309c9d71702 ("powerpc: inline huge vmap supported functions")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bbd84ad52bf377e8d3b5865a906f2dc5d99964ba.1707832677.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/vmalloc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/vmalloc.h b/arch/powerpc/include/asm/vmalloc.h
index 4c69ece52a31e..59ed89890c902 100644
--- a/arch/powerpc/include/asm/vmalloc.h
+++ b/arch/powerpc/include/asm/vmalloc.h
@@ -7,14 +7,14 @@
 #ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
 
 #define arch_vmap_pud_supported arch_vmap_pud_supported
-static inline bool arch_vmap_pud_supported(pgprot_t prot)
+static __always_inline bool arch_vmap_pud_supported(pgprot_t prot)
 {
 	/* HPT does not cope with large pages in the vmalloc area */
 	return radix_enabled();
 }
 
 #define arch_vmap_pmd_supported arch_vmap_pmd_supported
-static inline bool arch_vmap_pmd_supported(pgprot_t prot)
+static __always_inline bool arch_vmap_pmd_supported(pgprot_t prot)
 {
 	return radix_enabled();
 }
-- 
2.43.0

[PATCH 6.7 462/713] ASoC: SOF: Add some bounds checking to firmware data

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 98f681b0f84cfc3a1d83287b77697679e0398306 ]

Smatch complains about "head->full_size - head->header_size" can
underflow.  To some extent, we're always going to have to trust the
firmware a bit.  However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.

Fixes: d2458baa799f ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/ipc3-loader.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sof/ipc3-loader.c b/sound/soc/sof/ipc3-loader.c
index 28218766d2114..6e3ef06721106 100644
--- a/sound/soc/sof/ipc3-loader.c
+++ b/sound/soc/sof/ipc3-loader.c
@@ -148,6 +148,8 @@ static size_t sof_ipc3_fw_parse_ext_man(struct snd_sof_dev *sdev)
 
 	head = (struct sof_ext_man_header *)fw->data;
 	remaining = head->full_size - head->header_size;
+	if (remaining < 0 || remaining > sdev->basefw.fw->size)
+		return -EINVAL;
 	ext_man_size = ipc3_fw_ext_man_size(sdev, fw);
 
 	/* Assert firmware starts with extended manifest */
-- 
2.43.0

[PATCH 6.7 463/713] drm: ci: use clk_ignore_unused for apq8016

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit aa1267e673fe5307cf00d02add4017d2878598b6 ]

If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is
built-in, the clk_disable_unused congests with the runtime PM handling
of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to
fail without completing any jobs ([1]). Drop the BM_CMDLINE which
duplicate the command line from the .baremetal-igt-arm64 clause and
enforce the clk_ignore_unused kernelarg instead to make apq8016 runner
work.

[1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475

Fixes: 0119c894ab0d ("drm: Add initial ci/ subdirectory")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214083708.2323967-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ci/test.yml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ci/test.yml b/drivers/gpu/drm/ci/test.yml
index f285ed67eb3d8..2aa4b19166c06 100644
--- a/drivers/gpu/drm/ci/test.yml
+++ b/drivers/gpu/drm/ci/test.yml
@@ -104,7 +104,10 @@ msm:apq8016:
     DRIVER_NAME: msm
     BM_DTB: https://${PIPELINE_ARTIFACTS_BASE}/arm64/apq8016-sbc.dtb
     GPU_VERSION: apq8016
-    BM_CMDLINE: "ip=dhcp console=ttyMSM0,115200n8 $BM_KERNEL_EXTRA_ARGS root=/dev/nfs rw nfsrootdebug nfsroot=,tcp,nfsvers=4.2 init=/init $BM_KERNELARGS"
+    # disabling unused clocks congests with the MDSS runtime PM trying to
+    # disable those clocks and causes boot to fail.
+    # Reproducer: DRM_MSM=y, DRM_I2C_ADV7511=m
+    BM_KERNEL_EXTRA_ARGS: clk_ignore_unused
     RUNNER_TAG: google-freedreno-db410c
   script:
     - ./install/bare-metal/fastboot.sh
-- 
2.43.0

[PATCH 6.7 464/713] NTB: fix possible name leak in ntb_register_device()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit aebfdfe39b9327a3077d0df8db3beb3160c9bdd0 ]

If device_register() fails in ntb_register_device(), the device name
allocated by dev_set_name() should be freed. As per the comment in
device_register(), callers should use put_device() to give up the
reference in the error path. So fix this by calling put_device() in the
error path so that the name can be freed in kobject_cleanup().

As a result of this, put_device() in the error path of
ntb_register_device() is removed and the actual error is returned.

Fixes: a1bd3baeb2f1 ("NTB: Add NTB hardware abstraction layer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231201033057.1399131-1-yangyingliang@huaweicloud.com
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/core.c                            | 8 +++++++-
 drivers/pci/endpoint/functions/pci-epf-vntb.c | 6 +-----
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/ntb/core.c b/drivers/ntb/core.c
index 27dd93deff6e5..d702bee780826 100644
--- a/drivers/ntb/core.c
+++ b/drivers/ntb/core.c
@@ -100,6 +100,8 @@ EXPORT_SYMBOL(ntb_unregister_client);
 
 int ntb_register_device(struct ntb_dev *ntb)
 {
+	int ret;
+
 	if (!ntb)
 		return -EINVAL;
 	if (!ntb->pdev)
@@ -120,7 +122,11 @@ int ntb_register_device(struct ntb_dev *ntb)
 	ntb->ctx_ops = NULL;
 	spin_lock_init(&ntb->ctx_lock);
 
-	return device_register(&ntb->dev);
+	ret = device_register(&ntb->dev);
+	if (ret)
+		put_device(&ntb->dev);
+
+	return ret;
 }
 EXPORT_SYMBOL(ntb_register_device);
 
diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
index 3f60128560ed0..2b7bc5a731dd6 100644
--- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
@@ -1278,15 +1278,11 @@ static int pci_vntb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	ret = ntb_register_device(&ndev->ntb);
 	if (ret) {
 		dev_err(dev, "Failed to register NTB device\n");
-		goto err_register_dev;
+		return ret;
 	}
 
 	dev_dbg(dev, "PCI Virtual NTB driver loaded\n");
 	return 0;
-
-err_register_dev:
-	put_device(&ndev->ntb.dev);
-	return -EINVAL;
 }
 
 static struct pci_device_id pci_vntb_table[] = {
-- 
2.43.0

[PATCH 6.7 465/713] media: cedrus: h265: Fix configuring bitstream size

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 3a11887f7f11a6bb1f05e7f67b3ea20dadfec443 ]

bit_size field holds size of slice, not slice + header. Because of HW
quirks, driver can't program in just slice, but also preceding header.
But that means that currently used bit_size is wrong (too small).
Instead, just use size of whole buffer. There is no harm in doing this.

Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index fc9297232456f..16c822637dc6e 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -427,11 +427,11 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
 	unsigned int ctb_addr_x, ctb_addr_y;
 	struct cedrus_buffer *cedrus_buf;
 	dma_addr_t src_buf_addr;
-	dma_addr_t src_buf_end_addr;
 	u32 chroma_log2_weight_denom;
 	u32 num_entry_point_offsets;
 	u32 output_pic_list_index;
 	u32 pic_order_cnt[2];
+	size_t slice_bytes;
 	u8 padding;
 	int count;
 	u32 reg;
@@ -443,6 +443,7 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
 	pred_weight_table = &slice_params->pred_weight_table;
 	num_entry_point_offsets = slice_params->num_entry_point_offsets;
 	cedrus_buf = vb2_to_cedrus_buffer(&run->dst->vb2_buf);
+	slice_bytes = vb2_get_plane_payload(&run->src->vb2_buf, 0);
 
 	/*
 	 * If entry points offsets are present, we should get them
@@ -490,7 +491,7 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
 
 	cedrus_write(dev, VE_DEC_H265_BITS_OFFSET, 0);
 
-	reg = slice_params->bit_size;
+	reg = slice_bytes * 8;
 	cedrus_write(dev, VE_DEC_H265_BITS_LEN, reg);
 
 	/* Source beginning and end addresses. */
@@ -504,10 +505,7 @@ static int cedrus_h265_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
 
 	cedrus_write(dev, VE_DEC_H265_BITS_ADDR, reg);
 
-	src_buf_end_addr = src_buf_addr +
-			   DIV_ROUND_UP(slice_params->bit_size, 8);
-
-	reg = VE_DEC_H265_BITS_END_ADDR_BASE(src_buf_end_addr);
+	reg = VE_DEC_H265_BITS_END_ADDR_BASE(src_buf_addr + slice_bytes);
 	cedrus_write(dev, VE_DEC_H265_BITS_END_ADDR, reg);
 
 	/* Coding tree block address */
-- 
2.43.0

[PATCH 6.7 466/713] media: sun8i-di: Fix coefficient writes

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 794b581f8c6eb7b60fe468ccb96dd3cd38ff779f ]

Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.

Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  | 42 +++++++++----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index 90ab1d77b6a5e..34e0999392842 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -66,6 +66,7 @@ static void deinterlace_device_run(void *priv)
 	struct vb2_v4l2_buffer *src, *dst;
 	unsigned int hstep, vstep;
 	dma_addr_t addr;
+	int i;
 
 	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
@@ -160,6 +161,26 @@ static void deinterlace_device_run(void *priv)
 	deinterlace_write(dev, DEINTERLACE_CH1_HORZ_FACT, hstep);
 	deinterlace_write(dev, DEINTERLACE_CH1_VERT_FACT, vstep);
 
+	/* neutral filter coefficients */
+	deinterlace_set_bits(dev, DEINTERLACE_FRM_CTRL,
+			     DEINTERLACE_FRM_CTRL_COEF_ACCESS);
+	readl_poll_timeout(dev->base + DEINTERLACE_STATUS, val,
+			   val & DEINTERLACE_STATUS_COEF_STATUS, 2, 40);
+
+	for (i = 0; i < 32; i++) {
+		deinterlace_write(dev, DEINTERLACE_CH0_HORZ_COEF0 + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH0_VERT_COEF + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH1_HORZ_COEF0 + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH1_VERT_COEF + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+	}
+
+	deinterlace_clr_set_bits(dev, DEINTERLACE_FRM_CTRL,
+				 DEINTERLACE_FRM_CTRL_COEF_ACCESS, 0);
+
 	deinterlace_clr_set_bits(dev, DEINTERLACE_FIELD_CTRL,
 				 DEINTERLACE_FIELD_CTRL_FIELD_CNT_MSK,
 				 DEINTERLACE_FIELD_CTRL_FIELD_CNT(ctx->field));
@@ -248,7 +269,6 @@ static irqreturn_t deinterlace_irq(int irq, void *data)
 static void deinterlace_init(struct deinterlace_dev *dev)
 {
 	u32 val;
-	int i;
 
 	deinterlace_write(dev, DEINTERLACE_BYPASS,
 			  DEINTERLACE_BYPASS_CSC);
@@ -285,26 +305,6 @@ static void deinterlace_init(struct deinterlace_dev *dev)
 	deinterlace_clr_set_bits(dev, DEINTERLACE_CHROMA_DIFF,
 				 DEINTERLACE_CHROMA_DIFF_TH_MSK,
 				 DEINTERLACE_CHROMA_DIFF_TH(5));
-
-	/* neutral filter coefficients */
-	deinterlace_set_bits(dev, DEINTERLACE_FRM_CTRL,
-			     DEINTERLACE_FRM_CTRL_COEF_ACCESS);
-	readl_poll_timeout(dev->base + DEINTERLACE_STATUS, val,
-			   val & DEINTERLACE_STATUS_COEF_STATUS, 2, 40);
-
-	for (i = 0; i < 32; i++) {
-		deinterlace_write(dev, DEINTERLACE_CH0_HORZ_COEF0 + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH0_VERT_COEF + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH1_HORZ_COEF0 + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH1_VERT_COEF + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-	}
-
-	deinterlace_clr_set_bits(dev, DEINTERLACE_FRM_CTRL,
-				 DEINTERLACE_FRM_CTRL_COEF_ACCESS, 0);
 }
 
 static inline struct deinterlace_ctx *deinterlace_file2ctx(struct file *file)
-- 
2.43.0

[PATCH 6.7 467/713] media: sun8i-di: Fix power on/off sequences

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit cff104e33bad38f4b2c8d58816a7accfaa2879f9 ]

According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index 34e0999392842..f253a40cc04f8 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -929,11 +929,18 @@ static int deinterlace_runtime_resume(struct device *device)
 		return ret;
 	}
 
+	ret = reset_control_deassert(dev->rstc);
+	if (ret) {
+		dev_err(dev->dev, "Failed to apply reset\n");
+
+		goto err_exclusive_rate;
+	}
+
 	ret = clk_prepare_enable(dev->bus_clk);
 	if (ret) {
 		dev_err(dev->dev, "Failed to enable bus clock\n");
 
-		goto err_exclusive_rate;
+		goto err_rst;
 	}
 
 	ret = clk_prepare_enable(dev->mod_clk);
@@ -950,23 +957,16 @@ static int deinterlace_runtime_resume(struct device *device)
 		goto err_mod_clk;
 	}
 
-	ret = reset_control_deassert(dev->rstc);
-	if (ret) {
-		dev_err(dev->dev, "Failed to apply reset\n");
-
-		goto err_ram_clk;
-	}
-
 	deinterlace_init(dev);
 
 	return 0;
 
-err_ram_clk:
-	clk_disable_unprepare(dev->ram_clk);
 err_mod_clk:
 	clk_disable_unprepare(dev->mod_clk);
 err_bus_clk:
 	clk_disable_unprepare(dev->bus_clk);
+err_rst:
+	reset_control_assert(dev->rstc);
 err_exclusive_rate:
 	clk_rate_exclusive_put(dev->mod_clk);
 
@@ -977,11 +977,12 @@ static int deinterlace_runtime_suspend(struct device *device)
 {
 	struct deinterlace_dev *dev = dev_get_drvdata(device);
 
-	reset_control_assert(dev->rstc);
-
 	clk_disable_unprepare(dev->ram_clk);
 	clk_disable_unprepare(dev->mod_clk);
 	clk_disable_unprepare(dev->bus_clk);
+
+	reset_control_assert(dev->rstc);
+
 	clk_rate_exclusive_put(dev->mod_clk);
 
 	return 0;
-- 
2.43.0

[PATCH 6.7 468/713] media: sun8i-di: Fix chroma difference threshold

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 856525e8db272b0ce6d9c6e6c2eeb97892b485a6 ]

While there is no good explanation what this value does, vendor driver
uses value 31 for it. Align driver with it.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-di/sun8i-di.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index f253a40cc04f8..f7ff0937828cf 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -304,7 +304,7 @@ static void deinterlace_init(struct deinterlace_dev *dev)
 
 	deinterlace_clr_set_bits(dev, DEINTERLACE_CHROMA_DIFF,
 				 DEINTERLACE_CHROMA_DIFF_TH_MSK,
-				 DEINTERLACE_CHROMA_DIFF_TH(5));
+				 DEINTERLACE_CHROMA_DIFF_TH(31));
 }
 
 static inline struct deinterlace_ctx *deinterlace_file2ctx(struct file *file)
-- 
2.43.0

[PATCH 6.7 469/713] media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 4797a3dd46f220e6d83daf54d70c5b33db6deb01 ]

Free the memory allocated in v4l2_ctrl_handler_init on release.

Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csc-scaler.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/media/imx/imx-media-csc-scaler.c b/drivers/staging/media/imx/imx-media-csc-scaler.c
index 1fd39a2fca98a..95cca281e8a37 100644
--- a/drivers/staging/media/imx/imx-media-csc-scaler.c
+++ b/drivers/staging/media/imx/imx-media-csc-scaler.c
@@ -803,6 +803,7 @@ static int ipu_csc_scaler_release(struct file *file)
 
 	dev_dbg(priv->dev, "Releasing instance %p\n", ctx);
 
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdlr);
 	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
 	v4l2_fh_del(&ctx->fh);
 	v4l2_fh_exit(&ctx->fh);
-- 
2.43.0

[PATCH 6.7 470/713] media: go7007: add check of return value of go7007_read_addr()

[Sasha Levin]

From: Daniil Dulov <d.dulov@aladdin.ru>

[ Upstream commit 0b70530ee740861f4776ff724fcc25023df1799a ]

If go7007_read_addr() returns error channel is not assigned a value.
In this case go to allocfail.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
index eeb85981e02b6..762c13e49bfa5 100644
--- a/drivers/media/usb/go7007/go7007-usb.c
+++ b/drivers/media/usb/go7007/go7007-usb.c
@@ -1201,7 +1201,9 @@ static int go7007_usb_probe(struct usb_interface *intf,
 				u16 channel;
 
 				/* read channel number from GPIO[1:0] */
-				go7007_read_addr(go, 0x3c81, &channel);
+				if (go7007_read_addr(go, 0x3c81, &channel))
+					goto allocfail;
+
 				channel &= 0x3;
 				go->board_id = GO7007_BOARDID_ADLINK_MPG24;
 				usb->board = board = &board_adlink_mpg24;
-- 
2.43.0

[PATCH 6.7 471/713] media: pvrusb2: remove redundant NULL check

[Sasha Levin]

From: Daniil Dulov <d.dulov@aladdin.ru>

[ Upstream commit 95ac1210fb2753f968ebce0730d4fbc553c2a3dc ]

Pointer dip->stream cannot be NULL due to a shift, thus remove redundant
NULL check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: c74e0062684b ("V4L/DVB (5059): Pvrusb2: Be smarter about mode restoration")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index c04ab7258d645..d195bd6a2248b 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1198,11 +1198,6 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 		dip->minor_type = pvr2_v4l_type_video;
 		nr_ptr = video_nr;
 		caps |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_AUDIO;
-		if (!dip->stream) {
-			pr_err(KBUILD_MODNAME
-				": Failed to set up pvrusb2 v4l video dev due to missing stream instance\n");
-			return;
-		}
 		break;
 	case VFL_TYPE_VBI:
 		dip->config = pvr2_config_vbi;
-- 
2.43.0

[PATCH 6.7 472/713] media: pvrusb2: fix pvr2_stream_callback casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 30baa4a96b23add91a87305baaeba82c4e109e1f ]

clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2,
which casts three different prototypes into pvr2_stream_callback:

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1070 |         pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  110 |                                         (void (*)(void *))pvr2_context_notify,
      |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  152 |                                  (pvr2_stream_callback) pvr2_dvb_notify, adap);
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the functions to actually take a void* argument so the cast is no longer
needed.

Fixes: bb8ce9d9143c ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 8 ++++----
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c     | 6 ++++--
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c    | 6 ++++--
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 1764674de98bc..58f2f3ff10ee2 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -90,8 +90,10 @@ static void pvr2_context_destroy(struct pvr2_context *mp)
 }
 
 
-static void pvr2_context_notify(struct pvr2_context *mp)
+static void pvr2_context_notify(void *ptr)
 {
+	struct pvr2_context *mp = ptr;
+
 	pvr2_context_set_notify(mp,!0);
 }
 
@@ -106,9 +108,7 @@ static void pvr2_context_check(struct pvr2_context *mp)
 		pvr2_trace(PVR2_TRACE_CTXT,
 			   "pvr2_context %p (initialize)", mp);
 		/* Finish hardware initialization */
-		if (pvr2_hdw_initialize(mp->hdw,
-					(void (*)(void *))pvr2_context_notify,
-					mp)) {
+		if (pvr2_hdw_initialize(mp->hdw, pvr2_context_notify, mp)) {
 			mp->video_stream.stream =
 				pvr2_hdw_get_video_stream(mp->hdw);
 			/* Trigger interface initialization.  By doing this
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
index 26811efe0fb58..9a9bae21c6147 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
@@ -88,8 +88,10 @@ static int pvr2_dvb_feed_thread(void *data)
 	return stat;
 }
 
-static void pvr2_dvb_notify(struct pvr2_dvb_adapter *adap)
+static void pvr2_dvb_notify(void *ptr)
 {
+	struct pvr2_dvb_adapter *adap = ptr;
+
 	wake_up(&adap->buffer_wait_data);
 }
 
@@ -149,7 +151,7 @@ static int pvr2_dvb_stream_do_start(struct pvr2_dvb_adapter *adap)
 	}
 
 	pvr2_stream_set_callback(pvr->video_stream.stream,
-				 (pvr2_stream_callback) pvr2_dvb_notify, adap);
+				 pvr2_dvb_notify, adap);
 
 	ret = pvr2_stream_set_buffer_count(stream, PVR2_DVB_BUFFER_COUNT);
 	if (ret < 0) return ret;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index d195bd6a2248b..d608b793fa847 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1033,8 +1033,10 @@ static int pvr2_v4l2_open(struct file *file)
 }
 
 
-static void pvr2_v4l2_notify(struct pvr2_v4l2_fh *fhp)
+static void pvr2_v4l2_notify(void *ptr)
 {
+	struct pvr2_v4l2_fh *fhp = ptr;
+
 	wake_up(&fhp->wait_data);
 }
 
@@ -1067,7 +1069,7 @@ static int pvr2_v4l2_iosetup(struct pvr2_v4l2_fh *fh)
 
 	hdw = fh->channel.mc_head->hdw;
 	sp = fh->pdi->stream->stream;
-	pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
+	pvr2_stream_set_callback(sp, pvr2_v4l2_notify, fh);
 	pvr2_hdw_set_stream_type(hdw,fh->pdi->config);
 	if ((ret = pvr2_hdw_set_streaming(hdw,!0)) < 0) return ret;
 	return pvr2_ioread_set_enabled(fh->rhp,!0);
-- 
2.43.0

[PATCH 6.7 473/713] clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 117e7dc697c2739d754db8fe0c1e2d4f1f5d5f82 ]

SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/dispcc-sdm845.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sdm845.c b/drivers/clk/qcom/dispcc-sdm845.c
index 735adfefc3798..e792e0b130d33 100644
--- a/drivers/clk/qcom/dispcc-sdm845.c
+++ b/drivers/clk/qcom/dispcc-sdm845.c
@@ -759,6 +759,8 @@ static struct clk_branch disp_cc_mdss_vsync_clk = {
 
 static struct gdsc mdss_gdsc = {
 	.gdscr = 0x3000,
+	.en_few_wait_val = 0x6,
+	.en_rest_wait_val = 0x5,
 	.pd = {
 		.name = "mdss_gdsc",
 	},
-- 
2.43.0

[PATCH 6.7 474/713] drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit f6aed043ee5d75b3d1bfc452b1a9584b63c8f76b ]

In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().

if (replay == NULL && force_static)
    return false;

...

if (link->replay_settings.replay_feature_enabled &&
    replay->funcs->replay_set_power_opt) {
	replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
	link->replay_settings.replay_power_opt_active = *power_opts;
}

If 'replay' is NULL, this will cause a null pointer dereference.

Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)

Fixes: c7ddc0a800bc ("drm/amd/display: Add Functions to enable Freesync Panel Replay")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/link/protocols/link_edp_panel_control.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
index bdae54c4648bc..7c4a93d3cda5d 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c
@@ -889,7 +889,8 @@ bool edp_set_replay_allow_active(struct dc_link *link, const bool *allow_active,
 
 	/* Set power optimization flag */
 	if (power_opts && link->replay_settings.replay_power_opt_active != *power_opts) {
-		if (link->replay_settings.replay_feature_enabled && replay->funcs->replay_set_power_opt) {
+		if (replay != NULL && link->replay_settings.replay_feature_enabled &&
+		    replay->funcs->replay_set_power_opt) {
 			replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
 			link->replay_settings.replay_power_opt_active = *power_opts;
 		}
-- 
2.43.0

[PATCH 6.7 475/713] drm/panel: boe-tv101wum-nl6: make use of prepare_prev_first

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 42a7a16bedc991190310a02dd202e29cfac52525 ]

The panel on sc7180-trogdor-wormdingler and
sc7180-trogdor-quackingstick hasn't been coming up since commit
9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts
at modeset"). Let's add "prepare_prev_first" as has been done for many
other DSI panels.

Fixes: 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240216123111.1.I71c103720909790e1ec5a3f5bd96b18ab7b596fa@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216123111.1.I71c103720909790e1ec5a3f5bd96b18ab7b596fa@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index c4c0f08e92026..bc08814954f9b 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1871,6 +1871,8 @@ static int boe_panel_add(struct boe_panel *boe)
 
 	gpiod_set_value(boe->enable_gpio, 0);
 
+	boe->base.prepare_prev_first = true;
+
 	drm_panel_init(&boe->base, dev, &boe_panel_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
 	err = of_drm_get_panel_orientation(dev->of_node, &boe->orientation);
-- 
2.43.0

[PATCH 6.7 476/713] drm/msm/dpu: use devres-managed allocation for MDP TOP

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 1e897dcc4c673b9d585c09ddcdbe7fab0934e64f ]

Use devm_kzalloc to create MDP TOP structure. This allows us to remove
corresponding kfree and drop dpu_hw_mdp_destroy() function.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570047/
Link: https://lore.kernel.org/r/20231201211845.1026967-6-dmitry.baryshkov@linaro.org
Stable-dep-of: 49e27d3c9cd6 ("drm/msm/dpu: finalise global state object")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 17 +++++++----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h |  8 +++++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c    |  5 ++---
 3 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index 24e734768a727..05e48cf4ec1d2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -2,6 +2,8 @@
 /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
  */
 
+#include <drm/drm_managed.h>
+
 #include "dpu_hwio.h"
 #include "dpu_hw_catalog.h"
 #include "dpu_hw_top.h"
@@ -247,16 +249,17 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
 		ops->intf_audio_select = dpu_hw_intf_audio_select;
 }
 
-struct dpu_hw_mdp *dpu_hw_mdptop_init(const struct dpu_mdp_cfg *cfg,
-		void __iomem *addr,
-		const struct dpu_mdss_cfg *m)
+struct dpu_hw_mdp *dpu_hw_mdptop_init(struct drm_device *dev,
+				      const struct dpu_mdp_cfg *cfg,
+				      void __iomem *addr,
+				      const struct dpu_mdss_cfg *m)
 {
 	struct dpu_hw_mdp *mdp;
 
 	if (!addr)
 		return ERR_PTR(-EINVAL);
 
-	mdp = kzalloc(sizeof(*mdp), GFP_KERNEL);
+	mdp = drmm_kzalloc(dev, sizeof(*mdp), GFP_KERNEL);
 	if (!mdp)
 		return ERR_PTR(-ENOMEM);
 
@@ -271,9 +274,3 @@ struct dpu_hw_mdp *dpu_hw_mdptop_init(const struct dpu_mdp_cfg *cfg,
 
 	return mdp;
 }
-
-void dpu_hw_mdp_destroy(struct dpu_hw_mdp *mdp)
-{
-	kfree(mdp);
-}
-
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
index 8b1463d2b2f0b..6f3dc98087dfe 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h
@@ -145,13 +145,15 @@ struct dpu_hw_mdp {
 
 /**
  * dpu_hw_mdptop_init - initializes the top driver for the passed config
+ * @dev:  Corresponding device for devres management
  * @cfg:  MDP TOP configuration from catalog
  * @addr: Mapped register io address of MDP
  * @m:    Pointer to mdss catalog data
  */
-struct dpu_hw_mdp *dpu_hw_mdptop_init(const struct dpu_mdp_cfg *cfg,
-		void __iomem *addr,
-		const struct dpu_mdss_cfg *m);
+struct dpu_hw_mdp *dpu_hw_mdptop_init(struct drm_device *dev,
+				      const struct dpu_mdp_cfg *cfg,
+				      void __iomem *addr,
+				      const struct dpu_mdss_cfg *m);
 
 void dpu_hw_mdp_destroy(struct dpu_hw_mdp *mdp);
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index fe7267b3bff53..a7ae4479e12e9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -828,8 +828,6 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms)
 
 	dpu_kms->catalog = NULL;
 
-	if (dpu_kms->hw_mdp)
-		dpu_hw_mdp_destroy(dpu_kms->hw_mdp);
 	dpu_kms->hw_mdp = NULL;
 }
 
@@ -1112,7 +1110,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 
 	dpu_kms->rm_init = true;
 
-	dpu_kms->hw_mdp = dpu_hw_mdptop_init(dpu_kms->catalog->mdp,
+	dpu_kms->hw_mdp = dpu_hw_mdptop_init(dev,
+					     dpu_kms->catalog->mdp,
 					     dpu_kms->mmio,
 					     dpu_kms->catalog);
 	if (IS_ERR(dpu_kms->hw_mdp)) {
-- 
2.43.0

[PATCH 6.7 477/713] drm/msm/dpu: use devres-managed allocation for HW blocks

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit a106ed98af6848ef5810b12f5c9e2e0566f1d9c4 ]

Use devm_kzalloc to create HW block structure. This allows us to remove
corresponding kfree and drop all dpu_hw_*_destroy() functions as well as
dpu_rm_destroy(), which becomes empty afterwards.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570041/
Link: https://lore.kernel.org/r/20231201211845.1026967-7-dmitry.baryshkov@linaro.org
Stable-dep-of: 49e27d3c9cd6 ("drm/msm/dpu: finalise global state object")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c    | 19 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h    | 16 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 12 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    | 10 ++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c    |  7 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c   | 16 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h   | 12 +--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c   | 16 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h   | 13 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c     | 14 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h     | 12 +--
 .../gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c    | 14 ++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h    | 13 +--
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 15 ++--
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c   | 17 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h   | 16 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c     | 15 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h     | 13 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  8 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |  1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        | 90 +++----------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h        | 11 +--
 23 files changed, 127 insertions(+), 247 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 86182c7346060..e7b680a151d6d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -4,6 +4,9 @@
  */
 
 #include <linux/delay.h>
+
+#include <drm/drm_managed.h>
+
 #include "dpu_hwio.h"
 #include "dpu_hw_ctl.h"
 #include "dpu_kms.h"
@@ -680,14 +683,15 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
 		ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
 };
 
-struct dpu_hw_ctl *dpu_hw_ctl_init(const struct dpu_ctl_cfg *cfg,
-		void __iomem *addr,
-		u32 mixer_count,
-		const struct dpu_lm_cfg *mixer)
+struct dpu_hw_ctl *dpu_hw_ctl_init(struct drm_device *dev,
+				   const struct dpu_ctl_cfg *cfg,
+				   void __iomem *addr,
+				   u32 mixer_count,
+				   const struct dpu_lm_cfg *mixer)
 {
 	struct dpu_hw_ctl *c;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -702,8 +706,3 @@ struct dpu_hw_ctl *dpu_hw_ctl_init(const struct dpu_ctl_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_ctl_destroy(struct dpu_hw_ctl *ctx)
-{
-	kfree(ctx);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 1c242298ff2ee..279ebd8dfbff7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -274,20 +274,16 @@ static inline struct dpu_hw_ctl *to_dpu_hw_ctl(struct dpu_hw_blk *hw)
 /**
  * dpu_hw_ctl_init() - Initializes the ctl_path hw driver object.
  * Should be called before accessing any ctl_path register.
+ * @dev:  Corresponding device for devres management
  * @cfg:  ctl_path catalog entry for which driver object is required
  * @addr: mapped register io address of MDP
  * @mixer_count: Number of mixers in @mixer
  * @mixer: Pointer to an array of Layer Mixers defined in the catalog
  */
-struct dpu_hw_ctl *dpu_hw_ctl_init(const struct dpu_ctl_cfg *cfg,
-		void __iomem *addr,
-		u32 mixer_count,
-		const struct dpu_lm_cfg *mixer);
-
-/**
- * dpu_hw_ctl_destroy(): Destroys ctl driver context
- * should be called to free the context
- */
-void dpu_hw_ctl_destroy(struct dpu_hw_ctl *ctx);
+struct dpu_hw_ctl *dpu_hw_ctl_init(struct drm_device *dev,
+				   const struct dpu_ctl_cfg *cfg,
+				   void __iomem *addr,
+				   u32 mixer_count,
+				   const struct dpu_lm_cfg *mixer);
 
 #endif /*_DPU_HW_CTL_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
index 509dbaa51d878..5e9aad1b2aa28 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
@@ -3,6 +3,8 @@
  * Copyright (c) 2020-2022, Linaro Limited
  */
 
+#include <drm/drm_managed.h>
+
 #include <drm/display/drm_dsc_helper.h>
 
 #include "dpu_kms.h"
@@ -188,12 +190,13 @@ static void _setup_dsc_ops(struct dpu_hw_dsc_ops *ops,
 		ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk;
 };
 
-struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
+struct dpu_hw_dsc *dpu_hw_dsc_init(struct drm_device *dev,
+				   const struct dpu_dsc_cfg *cfg,
 				   void __iomem *addr)
 {
 	struct dpu_hw_dsc *c;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -206,8 +209,3 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc)
-{
-	kfree(dsc);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
index d5b597ab8c5ca..989c88d2449b6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -64,20 +64,24 @@ struct dpu_hw_dsc {
 
 /**
  * dpu_hw_dsc_init() - Initializes the DSC hw driver object.
+ * @dev:  Corresponding device for devres management
  * @cfg:  DSC catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * Return: Error code or allocated dpu_hw_dsc context
  */
-struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
-		void __iomem *addr);
+struct dpu_hw_dsc *dpu_hw_dsc_init(struct drm_device *dev,
+				   const struct dpu_dsc_cfg *cfg,
+				   void __iomem *addr);
 
 /**
  * dpu_hw_dsc_init_1_2() - initializes the v1.2 DSC hw driver object
+ * @dev:  Corresponding device for devres management
  * @cfg:  DSC catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * Returns: Error code or allocated dpu_hw_dsc context
  */
-struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(struct drm_device *dev,
+				       const struct dpu_dsc_cfg *cfg,
 				       void __iomem *addr);
 
 /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
index 24fe1d98eb86a..ba193b0376fe8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
@@ -4,6 +4,8 @@
  * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
  */
 
+#include <drm/drm_managed.h>
+
 #include <drm/display/drm_dsc_helper.h>
 
 #include "dpu_kms.h"
@@ -367,12 +369,13 @@ static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
 	ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
 }
 
-struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
+struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(struct drm_device *dev,
+				       const struct dpu_dsc_cfg *cfg,
 				       void __iomem *addr)
 {
 	struct dpu_hw_dsc *c;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c
index 9419b2209af88..b1da88e2935f4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c
@@ -2,6 +2,8 @@
 /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
  */
 
+#include <drm/drm_managed.h>
+
 #include "dpu_hwio.h"
 #include "dpu_hw_catalog.h"
 #include "dpu_hw_lm.h"
@@ -68,15 +70,16 @@ static void _setup_dspp_ops(struct dpu_hw_dspp *c,
 		c->ops.setup_pcc = dpu_setup_dspp_pcc;
 }
 
-struct dpu_hw_dspp *dpu_hw_dspp_init(const struct dpu_dspp_cfg *cfg,
-			void __iomem *addr)
+struct dpu_hw_dspp *dpu_hw_dspp_init(struct drm_device *dev,
+				     const struct dpu_dspp_cfg *cfg,
+				     void __iomem *addr)
 {
 	struct dpu_hw_dspp *c;
 
 	if (!addr)
 		return ERR_PTR(-EINVAL);
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -90,10 +93,3 @@ struct dpu_hw_dspp *dpu_hw_dspp_init(const struct dpu_dspp_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_dspp_destroy(struct dpu_hw_dspp *dspp)
-{
-	kfree(dspp);
-}
-
-
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h
index bea9656813301..3b435690b6ccb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h
@@ -81,18 +81,14 @@ static inline struct dpu_hw_dspp *to_dpu_hw_dspp(struct dpu_hw_blk *hw)
 /**
  * dpu_hw_dspp_init() - Initializes the DSPP hw driver object.
  * should be called once before accessing every DSPP.
+ * @dev:  Corresponding device for devres management
  * @cfg:  DSPP catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * Return: pointer to structure or ERR_PTR
  */
-struct dpu_hw_dspp *dpu_hw_dspp_init(const struct dpu_dspp_cfg *cfg,
-	void __iomem *addr);
-
-/**
- * dpu_hw_dspp_destroy(): Destroys DSPP driver context
- * @dspp: Pointer to DSPP driver context
- */
-void dpu_hw_dspp_destroy(struct dpu_hw_dspp *dspp);
+struct dpu_hw_dspp *dpu_hw_dspp_init(struct drm_device *dev,
+				     const struct dpu_dspp_cfg *cfg,
+				     void __iomem *addr);
 
 #endif /*_DPU_HW_DSPP_H */
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index b3d6cf97830dc..965692ef7892c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -12,6 +12,8 @@
 
 #include <linux/iopoll.h>
 
+#include <drm/drm_managed.h>
+
 #define INTF_TIMING_ENGINE_EN           0x000
 #define INTF_CONFIG                     0x004
 #define INTF_HSYNC_CTL                  0x008
@@ -530,8 +532,10 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
 	DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
 }
 
-struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
+struct dpu_hw_intf *dpu_hw_intf_init(struct drm_device *dev,
+				     const struct dpu_intf_cfg *cfg,
+				     void __iomem *addr,
+				     const struct dpu_mdss_version *mdss_rev)
 {
 	struct dpu_hw_intf *c;
 
@@ -540,7 +544,7 @@ struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
 		return NULL;
 	}
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -584,9 +588,3 @@ struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_intf_destroy(struct dpu_hw_intf *intf)
-{
-	kfree(intf);
-}
-
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
index 366fd87e26c74..6f4c87244f944 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -132,17 +132,14 @@ struct dpu_hw_intf {
 /**
  * dpu_hw_intf_init() - Initializes the INTF driver for the passed
  * interface catalog entry.
+ * @dev:  Corresponding device for devres management
  * @cfg:  interface catalog entry for which driver object is required
  * @addr: mapped register io address of MDP
  * @mdss_rev: dpu core's major and minor versions
  */
-struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev);
-
-/**
- * dpu_hw_intf_destroy(): Destroys INTF driver context
- * @intf:   Pointer to INTF driver context
- */
-void dpu_hw_intf_destroy(struct dpu_hw_intf *intf);
+struct dpu_hw_intf *dpu_hw_intf_init(struct drm_device *dev,
+				     const struct dpu_intf_cfg *cfg,
+				     void __iomem *addr,
+				     const struct dpu_mdss_version *mdss_rev);
 
 #endif /*_DPU_HW_INTF_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
index a590c1f7465fb..1d3ccf3228c62 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
@@ -4,6 +4,8 @@
  * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
  */
 
+#include <drm/drm_managed.h>
+
 #include "dpu_kms.h"
 #include "dpu_hw_catalog.h"
 #include "dpu_hwio.h"
@@ -156,8 +158,9 @@ static void _setup_mixer_ops(struct dpu_hw_lm_ops *ops,
 	ops->collect_misr = dpu_hw_lm_collect_misr;
 }
 
-struct dpu_hw_mixer *dpu_hw_lm_init(const struct dpu_lm_cfg *cfg,
-		void __iomem *addr)
+struct dpu_hw_mixer *dpu_hw_lm_init(struct drm_device *dev,
+				    const struct dpu_lm_cfg *cfg,
+				    void __iomem *addr)
 {
 	struct dpu_hw_mixer *c;
 
@@ -166,7 +169,7 @@ struct dpu_hw_mixer *dpu_hw_lm_init(const struct dpu_lm_cfg *cfg,
 		return NULL;
 	}
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -180,8 +183,3 @@ struct dpu_hw_mixer *dpu_hw_lm_init(const struct dpu_lm_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_lm_destroy(struct dpu_hw_mixer *lm)
-{
-	kfree(lm);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
index 98b77cda65472..0a33817552499 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
@@ -96,16 +96,12 @@ static inline struct dpu_hw_mixer *to_dpu_hw_mixer(struct dpu_hw_blk *hw)
 /**
  * dpu_hw_lm_init() - Initializes the mixer hw driver object.
  * should be called once before accessing every mixer.
+ * @dev:  Corresponding device for devres management
  * @cfg:  mixer catalog entry for which driver object is required
  * @addr: mapped register io address of MDP
  */
-struct dpu_hw_mixer *dpu_hw_lm_init(const struct dpu_lm_cfg *cfg,
-		void __iomem *addr);
-
-/**
- * dpu_hw_lm_destroy(): Destroys layer mixer driver context
- * @lm:   Pointer to LM driver context
- */
-void dpu_hw_lm_destroy(struct dpu_hw_mixer *lm);
+struct dpu_hw_mixer *dpu_hw_lm_init(struct drm_device *dev,
+				    const struct dpu_lm_cfg *cfg,
+				    void __iomem *addr);
 
 #endif /*_DPU_HW_LM_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c
index 90e0e05eff8d3..ddfa40a959cbd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c
@@ -4,6 +4,8 @@
 
 #include <linux/iopoll.h>
 
+#include <drm/drm_managed.h>
+
 #include "dpu_hw_mdss.h"
 #include "dpu_hwio.h"
 #include "dpu_hw_catalog.h"
@@ -37,12 +39,13 @@ static void _setup_merge_3d_ops(struct dpu_hw_merge_3d *c,
 	c->ops.setup_3d_mode = dpu_hw_merge_3d_setup_3d_mode;
 };
 
-struct dpu_hw_merge_3d *dpu_hw_merge_3d_init(const struct dpu_merge_3d_cfg *cfg,
-		void __iomem *addr)
+struct dpu_hw_merge_3d *dpu_hw_merge_3d_init(struct drm_device *dev,
+					     const struct dpu_merge_3d_cfg *cfg,
+					     void __iomem *addr)
 {
 	struct dpu_hw_merge_3d *c;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -55,8 +58,3 @@ struct dpu_hw_merge_3d *dpu_hw_merge_3d_init(const struct dpu_merge_3d_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_merge_3d_destroy(struct dpu_hw_merge_3d *hw)
-{
-	kfree(hw);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h
index 19cec5e887221..c192f02ec1abc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h
@@ -48,18 +48,13 @@ static inline struct dpu_hw_merge_3d *to_dpu_hw_merge_3d(struct dpu_hw_blk *hw)
 /**
  * dpu_hw_merge_3d_init() - Initializes the merge_3d driver for the passed
  * merge3d catalog entry.
+ * @dev:  Corresponding device for devres management
  * @cfg:  Pingpong catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * Return: Error code or allocated dpu_hw_merge_3d context
  */
-struct dpu_hw_merge_3d *dpu_hw_merge_3d_init(const struct dpu_merge_3d_cfg *cfg,
-		void __iomem *addr);
-
-/**
- * dpu_hw_merge_3d_destroy - destroys merge_3d driver context
- *	should be called to free the context
- * @pp:   Pointer to PP driver context returned by dpu_hw_merge_3d_init
- */
-void dpu_hw_merge_3d_destroy(struct dpu_hw_merge_3d *pp);
+struct dpu_hw_merge_3d *dpu_hw_merge_3d_init(struct drm_device *dev,
+					     const struct dpu_merge_3d_cfg *cfg,
+					     void __iomem *addr);
 
 #endif /*_DPU_HW_MERGE3D_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
index 057cac7f5d936..2db4c6fba37ac 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
@@ -4,6 +4,8 @@
 
 #include <linux/iopoll.h>
 
+#include <drm/drm_managed.h>
+
 #include "dpu_hw_mdss.h"
 #include "dpu_hwio.h"
 #include "dpu_hw_catalog.h"
@@ -281,12 +283,14 @@ static int dpu_hw_pp_setup_dsc(struct dpu_hw_pingpong *pp)
 	return 0;
 }
 
-struct dpu_hw_pingpong *dpu_hw_pingpong_init(const struct dpu_pingpong_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
+struct dpu_hw_pingpong *dpu_hw_pingpong_init(struct drm_device *dev,
+					     const struct dpu_pingpong_cfg *cfg,
+					     void __iomem *addr,
+					     const struct dpu_mdss_version *mdss_rev)
 {
 	struct dpu_hw_pingpong *c;
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -317,8 +321,3 @@ struct dpu_hw_pingpong *dpu_hw_pingpong_init(const struct dpu_pingpong_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_pingpong_destroy(struct dpu_hw_pingpong *pp)
-{
-	kfree(pp);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
index 0d541ca5b0566..a48b69fd79a3b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
@@ -121,19 +121,15 @@ static inline struct dpu_hw_pingpong *to_dpu_hw_pingpong(struct dpu_hw_blk *hw)
 /**
  * dpu_hw_pingpong_init() - initializes the pingpong driver for the passed
  * pingpong catalog entry.
+ * @dev:  Corresponding device for devres management
  * @cfg:  Pingpong catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * @mdss_rev: dpu core's major and minor versions
  * Return: Error code or allocated dpu_hw_pingpong context
  */
-struct dpu_hw_pingpong *dpu_hw_pingpong_init(const struct dpu_pingpong_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev);
-
-/**
- * dpu_hw_pingpong_destroy - destroys pingpong driver context
- *	should be called to free the context
- * @pp:   Pointer to PP driver context returned by dpu_hw_pingpong_init
- */
-void dpu_hw_pingpong_destroy(struct dpu_hw_pingpong *pp);
+struct dpu_hw_pingpong *dpu_hw_pingpong_init(struct drm_device *dev,
+					     const struct dpu_pingpong_cfg *cfg,
+					     void __iomem *addr,
+					     const struct dpu_mdss_version *mdss_rev);
 
 #endif /*_DPU_HW_PINGPONG_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index 8e3c65989c498..069bf429e5203 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -11,6 +11,7 @@
 #include "msm_mdss.h"
 
 #include <drm/drm_file.h>
+#include <drm/drm_managed.h>
 
 #define DPU_FETCH_CONFIG_RESET_VALUE   0x00000087
 
@@ -685,16 +686,18 @@ int _dpu_hw_sspp_init_debugfs(struct dpu_hw_sspp *hw_pipe, struct dpu_kms *kms,
 }
 #endif
 
-struct dpu_hw_sspp *dpu_hw_sspp_init(const struct dpu_sspp_cfg *cfg,
-		void __iomem *addr, const struct msm_mdss_data *mdss_data,
-		const struct dpu_mdss_version *mdss_rev)
+struct dpu_hw_sspp *dpu_hw_sspp_init(struct drm_device *dev,
+				     const struct dpu_sspp_cfg *cfg,
+				     void __iomem *addr,
+				     const struct msm_mdss_data *mdss_data,
+				     const struct dpu_mdss_version *mdss_rev)
 {
 	struct dpu_hw_sspp *hw_pipe;
 
 	if (!addr)
 		return ERR_PTR(-EINVAL);
 
-	hw_pipe = kzalloc(sizeof(*hw_pipe), GFP_KERNEL);
+	hw_pipe = drmm_kzalloc(dev, sizeof(*hw_pipe), GFP_KERNEL);
 	if (!hw_pipe)
 		return ERR_PTR(-ENOMEM);
 
@@ -709,9 +712,3 @@ struct dpu_hw_sspp *dpu_hw_sspp_init(const struct dpu_sspp_cfg *cfg,
 
 	return hw_pipe;
 }
-
-void dpu_hw_sspp_destroy(struct dpu_hw_sspp *ctx)
-{
-	kfree(ctx);
-}
-
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
index f93969fddb225..3641ef6bef530 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
@@ -339,21 +339,17 @@ struct dpu_kms;
 /**
  * dpu_hw_sspp_init() - Initializes the sspp hw driver object.
  * Should be called once before accessing every pipe.
+ * @dev:  Corresponding device for devres management
  * @cfg:  Pipe catalog entry for which driver object is required
  * @addr: Mapped register io address of MDP
  * @mdss_data: UBWC / MDSS configuration data
  * @mdss_rev: dpu core's major and minor versions
  */
-struct dpu_hw_sspp *dpu_hw_sspp_init(const struct dpu_sspp_cfg *cfg,
-		void __iomem *addr, const struct msm_mdss_data *mdss_data,
-		const struct dpu_mdss_version *mdss_rev);
-
-/**
- * dpu_hw_sspp_destroy(): Destroys SSPP driver context
- * should be called during Hw pipe cleanup.
- * @ctx:  Pointer to SSPP driver context returned by dpu_hw_sspp_init
- */
-void dpu_hw_sspp_destroy(struct dpu_hw_sspp *ctx);
+struct dpu_hw_sspp *dpu_hw_sspp_init(struct drm_device *dev,
+				     const struct dpu_sspp_cfg *cfg,
+				     void __iomem *addr,
+				     const struct msm_mdss_data *mdss_data,
+				     const struct dpu_mdss_version *mdss_rev);
 
 int _dpu_hw_sspp_init_debugfs(struct dpu_hw_sspp *hw_pipe, struct dpu_kms *kms,
 			      struct dentry *entry);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
index d49b3ef7689eb..e75995f7fcea9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
@@ -3,6 +3,8 @@
   * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved
   */
 
+#include <drm/drm_managed.h>
+
 #include "dpu_hw_mdss.h"
 #include "dpu_hwio.h"
 #include "dpu_hw_catalog.h"
@@ -211,15 +213,17 @@ static void _setup_wb_ops(struct dpu_hw_wb_ops *ops,
 		ops->setup_clk_force_ctrl = dpu_hw_wb_setup_clk_force_ctrl;
 }
 
-struct dpu_hw_wb *dpu_hw_wb_init(const struct dpu_wb_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
+struct dpu_hw_wb *dpu_hw_wb_init(struct drm_device *dev,
+				 const struct dpu_wb_cfg *cfg,
+				 void __iomem *addr,
+				 const struct dpu_mdss_version *mdss_rev)
 {
 	struct dpu_hw_wb *c;
 
 	if (!addr)
 		return ERR_PTR(-EINVAL);
 
-	c = kzalloc(sizeof(*c), GFP_KERNEL);
+	c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
 	if (!c)
 		return ERR_PTR(-ENOMEM);
 
@@ -233,8 +237,3 @@ struct dpu_hw_wb *dpu_hw_wb_init(const struct dpu_wb_cfg *cfg,
 
 	return c;
 }
-
-void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb)
-{
-	kfree(hw_wb);
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
index 88792f450a927..e671796ea379c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
@@ -76,18 +76,15 @@ struct dpu_hw_wb {
 
 /**
  * dpu_hw_wb_init() - Initializes the writeback hw driver object.
+ * @dev:  Corresponding device for devres management
  * @cfg:  wb_path catalog entry for which driver object is required
  * @addr: mapped register io address of MDP
  * @mdss_rev: dpu core's major and minor versions
  * Return: Error code or allocated dpu_hw_wb context
  */
-struct dpu_hw_wb *dpu_hw_wb_init(const struct dpu_wb_cfg *cfg,
-		void __iomem *addr, const struct dpu_mdss_version *mdss_rev);
-
-/**
- * dpu_hw_wb_destroy(): Destroy writeback hw driver object.
- * @hw_wb:  Pointer to writeback hw driver object
- */
-void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb);
+struct dpu_hw_wb *dpu_hw_wb_init(struct drm_device *dev,
+				 const struct dpu_wb_cfg *cfg,
+				 void __iomem *addr,
+				 const struct dpu_mdss_version *mdss_rev);
 
 #endif /*_DPU_HW_WB_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index a7ae4479e12e9..797099e5e53d9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -822,10 +822,6 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms)
 		}
 	}
 
-	if (dpu_kms->rm_init)
-		dpu_rm_destroy(&dpu_kms->rm);
-	dpu_kms->rm_init = false;
-
 	dpu_kms->catalog = NULL;
 
 	dpu_kms->hw_mdp = NULL;
@@ -1102,14 +1098,12 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		goto power_error;
 	}
 
-	rc = dpu_rm_init(&dpu_kms->rm, dpu_kms->catalog, dpu_kms->mdss, dpu_kms->mmio);
+	rc = dpu_rm_init(dev, &dpu_kms->rm, dpu_kms->catalog, dpu_kms->mdss, dpu_kms->mmio);
 	if (rc) {
 		DPU_ERROR("rm init failed: %d\n", rc);
 		goto power_error;
 	}
 
-	dpu_kms->rm_init = true;
-
 	dpu_kms->hw_mdp = dpu_hw_mdptop_init(dev,
 					     dpu_kms->catalog->mdp,
 					     dpu_kms->mmio,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index f5473d4dea92f..9112a702a00f2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -89,7 +89,6 @@ struct dpu_kms {
 	struct drm_private_obj global_state;
 
 	struct dpu_rm rm;
-	bool rm_init;
 
 	struct dpu_hw_vbif *hw_vbif[VBIF_MAX];
 	struct dpu_hw_mdp *hw_mdp;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index 8759466e2f379..0bb28cf4a6cbc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -34,72 +34,8 @@ struct dpu_rm_requirements {
 	struct msm_display_topology topology;
 };
 
-int dpu_rm_destroy(struct dpu_rm *rm)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(rm->dspp_blks); i++) {
-		struct dpu_hw_dspp *hw;
-
-		if (rm->dspp_blks[i]) {
-			hw = to_dpu_hw_dspp(rm->dspp_blks[i]);
-			dpu_hw_dspp_destroy(hw);
-		}
-	}
-	for (i = 0; i < ARRAY_SIZE(rm->pingpong_blks); i++) {
-		struct dpu_hw_pingpong *hw;
-
-		if (rm->pingpong_blks[i]) {
-			hw = to_dpu_hw_pingpong(rm->pingpong_blks[i]);
-			dpu_hw_pingpong_destroy(hw);
-		}
-	}
-	for (i = 0; i < ARRAY_SIZE(rm->merge_3d_blks); i++) {
-		struct dpu_hw_merge_3d *hw;
-
-		if (rm->merge_3d_blks[i]) {
-			hw = to_dpu_hw_merge_3d(rm->merge_3d_blks[i]);
-			dpu_hw_merge_3d_destroy(hw);
-		}
-	}
-	for (i = 0; i < ARRAY_SIZE(rm->mixer_blks); i++) {
-		struct dpu_hw_mixer *hw;
-
-		if (rm->mixer_blks[i]) {
-			hw = to_dpu_hw_mixer(rm->mixer_blks[i]);
-			dpu_hw_lm_destroy(hw);
-		}
-	}
-	for (i = 0; i < ARRAY_SIZE(rm->ctl_blks); i++) {
-		struct dpu_hw_ctl *hw;
-
-		if (rm->ctl_blks[i]) {
-			hw = to_dpu_hw_ctl(rm->ctl_blks[i]);
-			dpu_hw_ctl_destroy(hw);
-		}
-	}
-	for (i = 0; i < ARRAY_SIZE(rm->hw_intf); i++)
-		dpu_hw_intf_destroy(rm->hw_intf[i]);
-
-	for (i = 0; i < ARRAY_SIZE(rm->dsc_blks); i++) {
-		struct dpu_hw_dsc *hw;
-
-		if (rm->dsc_blks[i]) {
-			hw = to_dpu_hw_dsc(rm->dsc_blks[i]);
-			dpu_hw_dsc_destroy(hw);
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(rm->hw_wb); i++)
-		dpu_hw_wb_destroy(rm->hw_wb[i]);
-
-	for (i = 0; i < ARRAY_SIZE(rm->hw_sspp); i++)
-		dpu_hw_sspp_destroy(rm->hw_sspp[i]);
-
-	return 0;
-}
-
-int dpu_rm_init(struct dpu_rm *rm,
+int dpu_rm_init(struct drm_device *dev,
+		struct dpu_rm *rm,
 		const struct dpu_mdss_cfg *cat,
 		const struct msm_mdss_data *mdss_data,
 		void __iomem *mmio)
@@ -119,7 +55,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_mixer *hw;
 		const struct dpu_lm_cfg *lm = &cat->mixer[i];
 
-		hw = dpu_hw_lm_init(lm, mmio);
+		hw = dpu_hw_lm_init(dev, lm, mmio);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed lm object creation: err %d\n", rc);
@@ -132,7 +68,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_merge_3d *hw;
 		const struct dpu_merge_3d_cfg *merge_3d = &cat->merge_3d[i];
 
-		hw = dpu_hw_merge_3d_init(merge_3d, mmio);
+		hw = dpu_hw_merge_3d_init(dev, merge_3d, mmio);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed merge_3d object creation: err %d\n",
@@ -146,7 +82,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_pingpong *hw;
 		const struct dpu_pingpong_cfg *pp = &cat->pingpong[i];
 
-		hw = dpu_hw_pingpong_init(pp, mmio, cat->mdss_ver);
+		hw = dpu_hw_pingpong_init(dev, pp, mmio, cat->mdss_ver);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed pingpong object creation: err %d\n",
@@ -162,7 +98,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_intf *hw;
 		const struct dpu_intf_cfg *intf = &cat->intf[i];
 
-		hw = dpu_hw_intf_init(intf, mmio, cat->mdss_ver);
+		hw = dpu_hw_intf_init(dev, intf, mmio, cat->mdss_ver);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed intf object creation: err %d\n", rc);
@@ -175,7 +111,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_wb *hw;
 		const struct dpu_wb_cfg *wb = &cat->wb[i];
 
-		hw = dpu_hw_wb_init(wb, mmio, cat->mdss_ver);
+		hw = dpu_hw_wb_init(dev, wb, mmio, cat->mdss_ver);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed wb object creation: err %d\n", rc);
@@ -188,7 +124,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_ctl *hw;
 		const struct dpu_ctl_cfg *ctl = &cat->ctl[i];
 
-		hw = dpu_hw_ctl_init(ctl, mmio, cat->mixer_count, cat->mixer);
+		hw = dpu_hw_ctl_init(dev, ctl, mmio, cat->mixer_count, cat->mixer);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed ctl object creation: err %d\n", rc);
@@ -201,7 +137,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_dspp *hw;
 		const struct dpu_dspp_cfg *dspp = &cat->dspp[i];
 
-		hw = dpu_hw_dspp_init(dspp, mmio);
+		hw = dpu_hw_dspp_init(dev, dspp, mmio);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed dspp object creation: err %d\n", rc);
@@ -215,9 +151,9 @@ int dpu_rm_init(struct dpu_rm *rm,
 		const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
 
 		if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
-			hw = dpu_hw_dsc_init_1_2(dsc, mmio);
+			hw = dpu_hw_dsc_init_1_2(dev, dsc, mmio);
 		else
-			hw = dpu_hw_dsc_init(dsc, mmio);
+			hw = dpu_hw_dsc_init(dev, dsc, mmio);
 
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
@@ -231,7 +167,7 @@ int dpu_rm_init(struct dpu_rm *rm,
 		struct dpu_hw_sspp *hw;
 		const struct dpu_sspp_cfg *sspp = &cat->sspp[i];
 
-		hw = dpu_hw_sspp_init(sspp, mmio, mdss_data, cat->mdss_ver);
+		hw = dpu_hw_sspp_init(dev, sspp, mmio, mdss_data, cat->mdss_ver);
 		if (IS_ERR(hw)) {
 			rc = PTR_ERR(hw);
 			DPU_ERROR("failed sspp object creation: err %d\n", rc);
@@ -243,8 +179,6 @@ int dpu_rm_init(struct dpu_rm *rm,
 	return 0;
 
 fail:
-	dpu_rm_destroy(rm);
-
 	return rc ? rc : -EFAULT;
 }
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index 2b551566cbf48..36752d837be4c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -38,24 +38,19 @@ struct dpu_rm {
 /**
  * dpu_rm_init - Read hardware catalog and create reservation tracking objects
  *	for all HW blocks.
+ * @dev:  Corresponding device for devres management
  * @rm: DPU Resource Manager handle
  * @cat: Pointer to hardware catalog
  * @mdss_data: Pointer to MDSS / UBWC configuration
  * @mmio: mapped register io address of MDP
  * @Return: 0 on Success otherwise -ERROR
  */
-int dpu_rm_init(struct dpu_rm *rm,
+int dpu_rm_init(struct drm_device *dev,
+		struct dpu_rm *rm,
 		const struct dpu_mdss_cfg *cat,
 		const struct msm_mdss_data *mdss_data,
 		void __iomem *mmio);
 
-/**
- * dpu_rm_destroy - Free all memory allocated by dpu_rm_init
- * @rm: DPU Resource Manager handle
- * @Return: 0 on Success otherwise -ERROR
- */
-int dpu_rm_destroy(struct dpu_rm *rm);
-
 /**
  * dpu_rm_reserve - Given a CRTC->Encoder->Connector display chain, analyze
  *	the use connections and user requirements, specified through related
-- 
2.43.0

[PATCH 6.7 478/713] drm/msm/dpu: finalise global state object

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 49e27d3c9cd67fd5851f8b5518645b9bf3d2c6c0 ]

Add calls to finalise global state object and corresponding lock.

Fixes: de3916c70a24 ("drm/msm/dpu: Track resources in global state")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570175/
Link: https://lore.kernel.org/r/20231203000532.1290480-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 797099e5e53d9..81acbebaceadb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -385,6 +385,12 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms)
 	return 0;
 }
 
+static void dpu_kms_global_obj_fini(struct dpu_kms *dpu_kms)
+{
+	drm_atomic_private_obj_fini(&dpu_kms->global_state);
+	drm_modeset_lock_fini(&dpu_kms->global_state_lock);
+}
+
 static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms)
 {
 	struct icc_path *path0;
@@ -822,6 +828,8 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms)
 		}
 	}
 
+	dpu_kms_global_obj_fini(dpu_kms);
+
 	dpu_kms->catalog = NULL;
 
 	dpu_kms->hw_mdp = NULL;
-- 
2.43.0

[PATCH 6.7 479/713] drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit fae6f815505301b92d9113764f4d76d0bfe45607 ]

The register bits definitions for RGB666 formats are wrong in multiple
ways: first, in the DSI_PS_SEL bits region, the Packed 18-bits RGB666
format is selected with bit 1, while the Loosely Packed one is bit 2,
and second - the definition name "LOOSELY_PS_18BIT_RGB666" is wrong
because the loosely packed format is 24 bits instead!

Either way, functions mtk_dsi_ps_control_vact() and mtk_dsi_ps_control()
do not even agree on the DSI_PS_SEL bit to set in DSI_PSCTRL: one sets
loosely packed (24) on RGB666, the other sets packed (18), and the other
way around for RGB666_PACKED.

Fixing this entire stack of issues is done in one go:
 - Use the correct bit for the Loosely Packed RGB666 definition
 - Rename LOOSELY_PS_18BIT_RGB666 to LOOSELY_PS_24BIT_RGB666
 - Change ps_bpp_mode in mtk_dsi_ps_control_vact() to set:
    - Loosely Packed, 24-bits for MIPI_DSI_FMT_RGB666
    - Packed, 18-bits for MIPI_DSI_FMT_RGB666_PACKED

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a2fdfc8ddb153..cd19885ee017f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -71,8 +71,8 @@
 #define DSI_PS_WC			0x3fff
 #define DSI_PS_SEL			(3 << 16)
 #define PACKED_PS_16BIT_RGB565		(0 << 16)
-#define LOOSELY_PS_18BIT_RGB666		(1 << 16)
-#define PACKED_PS_18BIT_RGB666		(2 << 16)
+#define PACKED_PS_18BIT_RGB666		(1 << 16)
+#define LOOSELY_PS_24BIT_RGB666		(2 << 16)
 #define PACKED_PS_24BIT_RGB888		(3 << 16)
 
 #define DSI_VSA_NL		0x20
@@ -369,10 +369,10 @@ static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
 		ps_bpp_mode |= PACKED_PS_24BIT_RGB888;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
+		ps_bpp_mode |= LOOSELY_PS_24BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-		ps_bpp_mode |= LOOSELY_PS_18BIT_RGB666;
+		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB565:
 		ps_bpp_mode |= PACKED_PS_16BIT_RGB565;
@@ -426,7 +426,7 @@ static void mtk_dsi_ps_control(struct mtk_dsi *dsi)
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		tmp_reg = LOOSELY_PS_18BIT_RGB666;
+		tmp_reg = LOOSELY_PS_24BIT_RGB666;
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-- 
2.43.0

[PATCH 6.7 480/713] PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

[Sasha Levin]

From: Jörg Wedekind <joerg@wedekind.de>

[ Upstream commit baf67aefbe7d7deafa59ca49612d163f8889934c ]

Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.

Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them.  If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.

The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as
broken.

This fixes PCI Parity Errors like :

  3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.

Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de
Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a2bf6de11462f..528044237bf9f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5520,6 +5520,7 @@ static void quirk_no_ext_tags(struct pci_dev *pdev)
 
 	pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL);
 }
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_3WARE, 0x1004, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags);
-- 
2.43.0

[PATCH 6.7 481/713] powerpc/ps3: Fix lv1 hcall assembly for ELFv2 calling convention

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 6735fef14c1f089ae43fd6d43add818b7ff682a8 ]

Stack-passed parameters begin at a different offset in the caller's
stack in the ELFv2 ABI.

Reported-by: Geoff Levand <geoff@infradead.org>
Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231227072405.63751-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/ppc_asm.h  |  6 ++++--
 arch/powerpc/platforms/ps3/hvcall.S | 18 +++++++++---------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index e7792aa135105..041ee25955205 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -201,11 +201,13 @@
 
 #ifdef CONFIG_PPC64_ELF_ABI_V2
 #define STK_GOT		24
-#define __STK_PARAM(i)	(32 + ((i)-3)*8)
+#define STK_PARAM_AREA	32
 #else
 #define STK_GOT		40
-#define __STK_PARAM(i)	(48 + ((i)-3)*8)
+#define STK_PARAM_AREA	48
 #endif
+
+#define __STK_PARAM(i)	(STK_PARAM_AREA + ((i)-3)*8)
 #define STK_PARAM(i)	__STK_PARAM(__REG_##i)
 
 #ifdef CONFIG_PPC64_ELF_ABI_V2
diff --git a/arch/powerpc/platforms/ps3/hvcall.S b/arch/powerpc/platforms/ps3/hvcall.S
index 509e30ad01bb4..59ea569debf47 100644
--- a/arch/powerpc/platforms/ps3/hvcall.S
+++ b/arch/powerpc/platforms/ps3/hvcall.S
@@ -714,7 +714,7 @@ _GLOBAL(_##API_NAME)				\
 	std	r4, 0(r11);			\
 	ld	r11, -16(r1);			\
 	std	r5, 0(r11);			\
-	ld	r11, 48+8*8(r1);		\
+	ld	r11, STK_PARAM_AREA+8*8(r1);	\
 	std	r6, 0(r11);			\
 						\
 	ld	r0, 16(r1);			\
@@ -746,22 +746,22 @@ _GLOBAL(_##API_NAME)				\
 	mflr	r0;				\
 	std	r0, 16(r1);			\
 						\
-	std	r10, 48+8*7(r1);		\
+	std	r10, STK_PARAM_AREA+8*7(r1);	\
 						\
 	li	r11, API_NUMBER;		\
 	lv1call;				\
 						\
-	ld	r11, 48+8*7(r1);		\
+	ld	r11, STK_PARAM_AREA+8*7(r1);	\
 	std	r4, 0(r11);			\
-	ld	r11, 48+8*8(r1);		\
+	ld	r11, STK_PARAM_AREA+8*8(r1);	\
 	std	r5, 0(r11);			\
-	ld	r11, 48+8*9(r1);		\
+	ld	r11, STK_PARAM_AREA+8*9(r1);	\
 	std	r6, 0(r11);			\
-	ld	r11, 48+8*10(r1);		\
+	ld	r11, STK_PARAM_AREA+8*10(r1);	\
 	std	r7, 0(r11);			\
-	ld	r11, 48+8*11(r1);		\
+	ld	r11, STK_PARAM_AREA+8*11(r1);	\
 	std	r8, 0(r11);			\
-	ld	r11, 48+8*12(r1);		\
+	ld	r11, STK_PARAM_AREA+8*12(r1);	\
 	std	r9, 0(r11);			\
 						\
 	ld	r0, 16(r1);			\
@@ -777,7 +777,7 @@ _GLOBAL(_##API_NAME)				\
 	li      r11, API_NUMBER;		\
 	lv1call;				\
 						\
-	ld	r11, 48+8*8(r1);		\
+	ld	r11, STK_PARAM_AREA+8*8(r1);	\
 	std	r4, 0(r11);			\
 						\
 	ld	r0, 16(r1);			\
-- 
2.43.0

[PATCH 6.7 482/713] drm/bridge: adv7511: fix crash on irq during probe

[Sasha Levin]

From: Mads Bligaard Nielsen <bli@bang-olufsen.dk>

[ Upstream commit aeedaee5ef5468caf59e2bb1265c2116e0c9a924 ]

Moved IRQ registration down to end of adv7511_probe().

If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:

    Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
    Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
    Call trace:
     cec_received_msg_ts+0x48/0x990 [cec]
     adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
     adv7511_irq_process+0xd8/0x120 [adv7511]
     adv7511_irq_handler+0x1c/0x30 [adv7511]
     irq_thread_fn+0x30/0xa0
     irq_thread+0x14c/0x238
     kthread+0x190/0x1a8

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 22 ++++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 8be235144f6d9..6fc292393c674 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1277,17 +1277,6 @@ static int adv7511_probe(struct i2c_client *i2c)
 
 	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
-	if (i2c->irq) {
-		init_waitqueue_head(&adv7511->wq);
-
-		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
-						adv7511_irq_handler,
-						IRQF_ONESHOT, dev_name(dev),
-						adv7511);
-		if (ret)
-			goto err_unregister_cec;
-	}
-
 	adv7511_power_off(adv7511);
 
 	i2c_set_clientdata(i2c, adv7511);
@@ -1311,6 +1300,17 @@ static int adv7511_probe(struct i2c_client *i2c)
 
 	adv7511_audio_init(dev, adv7511);
 
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_unregister_audio;
+	}
+
 	if (adv7511->info->has_dsi) {
 		ret = adv7533_attach_dsi(adv7511);
 		if (ret)
-- 
2.43.0

[PATCH 6.7 483/713] pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit a6f06b909fee72c679c565adfa7f080f9595e336 ]

The conversion to DEFINE_NOIRQ_DEV_PM_OPS() lost the ability of the
compiler to optimize away the struct dev_pm_ops object when it is not
needed.

Fix this by replacing the use of pm_sleep_ptr() by a custom wrapper.

Fixes: 727eb02eb753375e ("pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/6238a78e32fa21f0c795406b6cba7bce7af92577.1708513940.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/renesas/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index 93e51abbf519a..d1e92bbed33ad 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -731,10 +731,12 @@ static int sh_pfc_resume_noirq(struct device *dev)
 		sh_pfc_walk_regs(pfc, sh_pfc_restore_reg);
 	return 0;
 }
+#define pm_psci_sleep_ptr(_ptr)	pm_sleep_ptr(_ptr)
 #else
 static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
 static int sh_pfc_suspend_noirq(struct device *dev) { return 0; }
 static int sh_pfc_resume_noirq(struct device *dev) { return 0; }
+#define pm_psci_sleep_ptr(_ptr)	PTR_IF(false, (_ptr))
 #endif	/* CONFIG_ARM_PSCI_FW */
 
 static DEFINE_NOIRQ_DEV_PM_OPS(sh_pfc_pm, sh_pfc_suspend_noirq, sh_pfc_resume_noirq);
@@ -1415,7 +1417,7 @@ static struct platform_driver sh_pfc_driver = {
 	.driver		= {
 		.name	= DRV_NAME,
 		.of_match_table = of_match_ptr(sh_pfc_of_table),
-		.pm	= pm_sleep_ptr(&sh_pfc_pm),
+		.pm	= pm_psci_sleep_ptr(&sh_pfc_pm),
 	},
 };
 
-- 
2.43.0

[PATCH 6.7 484/713] clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 74e39f526d95c0c119ada1874871ee328c59fbee ]

The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.

Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/hisilicon/clk-hi3519.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
index b871872d9960d..141b727ff60d6 100644
--- a/drivers/clk/hisilicon/clk-hi3519.c
+++ b/drivers/clk/hisilicon/clk-hi3519.c
@@ -130,7 +130,7 @@ static void hi3519_clk_unregister(struct platform_device *pdev)
 	of_clk_del_provider(pdev->dev.of_node);
 
 	hisi_clk_unregister_gate(hi3519_gate_clks,
-				ARRAY_SIZE(hi3519_mux_clks),
+				ARRAY_SIZE(hi3519_gate_clks),
 				crg->clk_data);
 	hisi_clk_unregister_mux(hi3519_mux_clks,
 				ARRAY_SIZE(hi3519_mux_clks),
-- 
2.43.0

[PATCH 6.7 485/713] clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 64c6a38136b74a2f18c42199830975edd9fbc379 ]

'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.

If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.

The best we can do, is to avoid this wrong release of memory.

Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/hisilicon/clk-hi3559a.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi3559a.c b/drivers/clk/hisilicon/clk-hi3559a.c
index ff4ca0edce06a..4623befafaec4 100644
--- a/drivers/clk/hisilicon/clk-hi3559a.c
+++ b/drivers/clk/hisilicon/clk-hi3559a.c
@@ -491,7 +491,6 @@ static void hisi_clk_register_pll(struct hi3559av100_pll_clock *clks,
 
 		clk = clk_register(NULL, &p_clk->hw);
 		if (IS_ERR(clk)) {
-			devm_kfree(dev, p_clk);
 			dev_err(dev, "%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
 			continue;
-- 
2.43.0

[PATCH 6.7 486/713] clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 03c1c51eba6be49b42816af9db114553131af6c8 ]

If an error occurs after mtk_alloc_clk_data(), mtk_free_clk_data() should
be called, as already done in the remove function.

Fixes: 54b7026f011e ("clk: mediatek: mt8135-apmixedsys: Convert to platform_driver and module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6cd6af61e5a91598068227f1f68cfcfde1507453.1704615011.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-mt8135-apmixedsys.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-mt8135-apmixedsys.c b/drivers/clk/mediatek/clk-mt8135-apmixedsys.c
index d1239b4b3db74..41bb2d2e2ea74 100644
--- a/drivers/clk/mediatek/clk-mt8135-apmixedsys.c
+++ b/drivers/clk/mediatek/clk-mt8135-apmixedsys.c
@@ -59,7 +59,7 @@ static int clk_mt8135_apmixed_probe(struct platform_device *pdev)
 
 	ret = mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
 	if (ret)
-		return ret;
+		goto free_clk_data;
 
 	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 	if (ret)
@@ -69,6 +69,8 @@ static int clk_mt8135_apmixed_probe(struct platform_device *pdev)
 
 unregister_plls:
 	mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
+free_clk_data:
+	mtk_free_clk_data(clk_data);
 
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 487/713] clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit a32e88f2b20259f5fe4f8eed598bbc85dc4879ed ]

'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.

Remove the redundant call.

Fixes: c50e2ea6507b ("clk: mediatek: mt7622-apmixedsys: Add .remove() callback for module build")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c553c2a5077757e4f7af0bb895acc43881cf62c.1704616152.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-mt7622-apmixedsys.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-mt7622-apmixedsys.c b/drivers/clk/mediatek/clk-mt7622-apmixedsys.c
index 9cffd278e9a43..1b8f859b6b6cc 100644
--- a/drivers/clk/mediatek/clk-mt7622-apmixedsys.c
+++ b/drivers/clk/mediatek/clk-mt7622-apmixedsys.c
@@ -127,7 +127,6 @@ static void clk_mt7622_apmixed_remove(struct platform_device *pdev)
 	of_clk_del_provider(node);
 	mtk_clk_unregister_gates(apmixed_clks, ARRAY_SIZE(apmixed_clks), clk_data);
 	mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
-	mtk_free_clk_data(clk_data);
 }
 
 static const struct of_device_id of_match_clk_mt7622_apmixed[] = {
-- 
2.43.0

[PATCH 6.7 488/713] clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF

[Sasha Levin]

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit a65083fa663a335008e34f65e184041174a9dc7e ]

CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.

After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.

Fixes: 1eb8d61ac5c9 ("clk: mediatek: mt8183: Add back SSPM related clocks")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240219105125.956278-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-mt8183.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c
index 6e23461a04559..934d5a15acfc5 100644
--- a/drivers/clk/mediatek/clk-mt8183.c
+++ b/drivers/clk/mediatek/clk-mt8183.c
@@ -790,7 +790,7 @@ static const struct mtk_gate infra_clks[] = {
 	/* infra_sspm_26m_self is main clock in co-processor, should not be closed in Linux. */
 	GATE_INFRA3_FLAGS(CLK_INFRA_SSPM_26M_SELF, "infra_sspm_26m_self", "f_f26m_ck", 3, CLK_IS_CRITICAL),
 	/* infra_sspm_32k_self is main clock in co-processor, should not be closed in Linux. */
-	GATE_INFRA3_FLAGS(CLK_INFRA_SSPM_32K_SELF, "infra_sspm_32k_self", "f_f26m_ck", 4, CLK_IS_CRITICAL),
+	GATE_INFRA3_FLAGS(CLK_INFRA_SSPM_32K_SELF, "infra_sspm_32k_self", "clk32k", 4, CLK_IS_CRITICAL),
 	GATE_INFRA3(CLK_INFRA_UFS_AXI, "infra_ufs_axi", "axi_sel", 5),
 	GATE_INFRA3(CLK_INFRA_I2C6, "infra_i2c6", "i2c_sel", 6),
 	GATE_INFRA3(CLK_INFRA_AP_MSDC0, "infra_ap_msdc0", "msdc50_hclk_sel", 7),
-- 
2.43.0

[PATCH 6.7 489/713] clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical

[Sasha Levin]

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit aa690050c00a251ab69e3c5204d582833d0b958c ]

Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.

Fixes: 813c3b53b55b ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/fc157139e6b7f8dfb6430ac7191ba754027705e8.1708221995.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-mt7981-topckgen.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt7981-topckgen.c b/drivers/clk/mediatek/clk-mt7981-topckgen.c
index 682f4ca9e89ad..493aa11d3a175 100644
--- a/drivers/clk/mediatek/clk-mt7981-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c
@@ -357,8 +357,9 @@ static const struct mtk_mux top_muxes[] = {
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
 			     sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
 			     0x1C0, 21),
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-			     0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
+	MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
+				   0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22,
+				   CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents,
 			     0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23),
 	/* CLK_CFG_6 */
-- 
2.43.0

[PATCH 6.7 490/713] drm/tegra: put drm_gem_object ref on error in tegra_fb_create

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 32e5a120a5105bce01561978ee55aee8e40ac0dc ]

Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.

Found by Linux Verification Center (linuxtesting.org).

Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
index a719af1dc9a57..46170753699dc 100644
--- a/drivers/gpu/drm/tegra/fb.c
+++ b/drivers/gpu/drm/tegra/fb.c
@@ -159,6 +159,7 @@ struct drm_framebuffer *tegra_fb_create(struct drm_device *drm,
 
 		if (gem->size < size) {
 			err = -EINVAL;
+			drm_gem_object_put(gem);
 			goto unreference;
 		}
 
-- 
2.43.0

[PATCH 6.7 491/713] media: ivsc: csi: Swap SINK and SOURCE pads

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit 48f5fd8967f8dd01679fc1618b0cba02095cddc5 ]

This patch swaps SINK and SOURCE pads of the MEI CSI sub-device. While
this does change the UAPI by swapping the pads, the driver has never been
usable in upstream kernel as the Intel IPU6 driver it depends on any
functionality has not yet been merged.

Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/intel/ivsc/mei_csi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/intel/ivsc/mei_csi.c b/drivers/media/pci/intel/ivsc/mei_csi.c
index 2a6b828fd8dd5..e111fd6ff6f6b 100644
--- a/drivers/media/pci/intel/ivsc/mei_csi.c
+++ b/drivers/media/pci/intel/ivsc/mei_csi.c
@@ -71,8 +71,8 @@ enum ivsc_privacy_status {
 };
 
 enum csi_pads {
-	CSI_PAD_SOURCE,
 	CSI_PAD_SINK,
+	CSI_PAD_SOURCE,
 	CSI_NUM_PADS
 };
 
@@ -584,7 +584,7 @@ static int mei_csi_notify_bound(struct v4l2_async_notifier *notifier,
 	csi->remote_pad = pad;
 
 	return media_create_pad_link(&subdev->entity, pad,
-				     &csi->subdev.entity, 1,
+				     &csi->subdev.entity, CSI_PAD_SINK,
 				     MEDIA_LNK_FL_ENABLED |
 				     MEDIA_LNK_FL_IMMUTABLE);
 }
-- 
2.43.0

[PATCH 6.7 492/713] media: i2c: imx290: Fix IMX920 typo

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 6fc62efa266b0918c7b226f45c2eccfcf99a6d8e ]

Replace IMX920 by IMX290.

Fixes: b4ab57b07c5b9 ("media: i2c: imx290: Add crop selection targets support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/imx290.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index c6fea5837a19f..6dacd38ae947a 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -150,10 +150,10 @@
 
 #define IMX290_PIXEL_ARRAY_WIDTH			1945
 #define IMX290_PIXEL_ARRAY_HEIGHT			1097
-#define IMX920_PIXEL_ARRAY_MARGIN_LEFT			12
-#define IMX920_PIXEL_ARRAY_MARGIN_RIGHT			13
-#define IMX920_PIXEL_ARRAY_MARGIN_TOP			8
-#define IMX920_PIXEL_ARRAY_MARGIN_BOTTOM		9
+#define IMX290_PIXEL_ARRAY_MARGIN_LEFT			12
+#define IMX290_PIXEL_ARRAY_MARGIN_RIGHT			13
+#define IMX290_PIXEL_ARRAY_MARGIN_TOP			8
+#define IMX290_PIXEL_ARRAY_MARGIN_BOTTOM		9
 #define IMX290_PIXEL_ARRAY_RECORDING_WIDTH		1920
 #define IMX290_PIXEL_ARRAY_RECORDING_HEIGHT		1080
 
@@ -1161,10 +1161,10 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
 		 * The sensor moves the readout by 1 pixel based on flips to
 		 * keep the Bayer order the same.
 		 */
-		sel->r.top = IMX920_PIXEL_ARRAY_MARGIN_TOP
+		sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP
 			   + (IMX290_PIXEL_ARRAY_RECORDING_HEIGHT - format->height) / 2
 			   + imx290->vflip->val;
-		sel->r.left = IMX920_PIXEL_ARRAY_MARGIN_LEFT
+		sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT
 			    + (IMX290_PIXEL_ARRAY_RECORDING_WIDTH - format->width) / 2
 			    + imx290->hflip->val;
 		sel->r.width = format->width;
@@ -1183,8 +1183,8 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
 		return 0;
 
 	case V4L2_SEL_TGT_CROP_DEFAULT:
-		sel->r.top = IMX920_PIXEL_ARRAY_MARGIN_TOP;
-		sel->r.left = IMX920_PIXEL_ARRAY_MARGIN_LEFT;
+		sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP;
+		sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT;
 		sel->r.width = IMX290_PIXEL_ARRAY_RECORDING_WIDTH;
 		sel->r.height = IMX290_PIXEL_ARRAY_RECORDING_HEIGHT;
 
-- 
2.43.0

[PATCH 6.7 493/713] mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit d2b0680cf3b05490b579e71b0df6e07451977745 ]

of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.

Fixes: 45330bb43421 ("mfd: syscon: Allow property as NULL in syscon_regmap_lookup_by_phandle")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/syscon.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index c9550368d9ea5..7d0e91164cbaa 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -238,7 +238,9 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 		return ERR_PTR(-ENODEV);
 
 	regmap = syscon_node_to_regmap(syscon_np);
-	of_node_put(syscon_np);
+
+	if (property)
+		of_node_put(syscon_np);
 
 	return regmap;
 }
-- 
2.43.0

[PATCH 6.7 494/713] mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit e28c28a34ee9fa2ea671a20e5e7064e6220d55e7 ]

of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.

Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-4-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/altera-sysmgr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c
index 0e52bd2ebd74b..fb5f988e61f37 100644
--- a/drivers/mfd/altera-sysmgr.c
+++ b/drivers/mfd/altera-sysmgr.c
@@ -109,7 +109,9 @@ struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
 
 	dev = driver_find_device_by_of_node(&altr_sysmgr_driver.driver,
 					    (void *)sysmgr_np);
-	of_node_put(sysmgr_np);
+	if (property)
+		of_node_put(sysmgr_np);
+
 	if (!dev)
 		return ERR_PTR(-EPROBE_DEFER);
 
-- 
2.43.0

[PATCH 6.7 495/713] perf print-events: make is_event_supported() more robust

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 25412c0364f7110faa6053c73e3fd47ca956b8c3 ]

Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.

PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:

(a) Many PMUs lack support for any event filtering, and require all
    perf_event_attr::exclude_* bits to be clear. This includes Alpha's
    CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
    ARMv7,

(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
    requires that perf_event_attr::exclude_kernel is set.

(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
    set as the hardware PMU does not count while a guest is running (but
    might be extended in future to do so).

In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.

Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.

Since commit:

  82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")

... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:

  5c816728651ae425 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")

Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.

This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.

I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.

Note that this does not remove the need for commit:

  a24d9d9dc096fc0d ("perf parse-events: Make legacy events lower priority than sysfs/JSON")

... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).

Fixes: 82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/print-events.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/tools/perf/util/print-events.c b/tools/perf/util/print-events.c
index b0fc48be623f3..4f67e8f00a4d6 100644
--- a/tools/perf/util/print-events.c
+++ b/tools/perf/util/print-events.c
@@ -232,7 +232,6 @@ void print_sdt_events(const struct print_callbacks *print_cb, void *print_state)
 bool is_event_supported(u8 type, u64 config)
 {
 	bool ret = true;
-	int open_return;
 	struct evsel *evsel;
 	struct perf_event_attr attr = {
 		.type = type,
@@ -246,20 +245,32 @@ bool is_event_supported(u8 type, u64 config)
 
 	evsel = evsel__new(&attr);
 	if (evsel) {
-		open_return = evsel__open(evsel, NULL, tmap);
-		ret = open_return >= 0;
+		ret = evsel__open(evsel, NULL, tmap) >= 0;
 
-		if (open_return == -EACCES) {
+		if (!ret) {
 			/*
-			 * This happens if the paranoid value
+			 * The event may fail to open if the paranoid value
 			 * /proc/sys/kernel/perf_event_paranoid is set to 2
-			 * Re-run with exclude_kernel set; we don't do that
-			 * by default as some ARM machines do not support it.
-			 *
+			 * Re-run with exclude_kernel set; we don't do that by
+			 * default as some ARM machines do not support it.
 			 */
 			evsel->core.attr.exclude_kernel = 1;
 			ret = evsel__open(evsel, NULL, tmap) >= 0;
 		}
+
+		if (!ret) {
+			/*
+			 * The event may fail to open if the PMU requires
+			 * exclude_guest to be set (e.g. as the Apple M1 PMU
+			 * requires).
+			 * Re-run with exclude_guest set; we don't do that by
+			 * default as it's equally legitimate for another PMU
+			 * driver to require that exclude_guest is clear.
+			 */
+			evsel->core.attr.exclude_guest = 1;
+			ret = evsel__open(evsel, NULL, tmap) >= 0;
+		}
+
 		evsel__delete(evsel);
 	}
 
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6.7 495/713] perf print-events: make is_event_supported() more robust

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 25412c0364f7110faa6053c73e3fd47ca956b8c3 ]

Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.

PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:

(a) Many PMUs lack support for any event filtering, and require all
    perf_event_attr::exclude_* bits to be clear. This includes Alpha's
    CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
    ARMv7,

(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
    requires that perf_event_attr::exclude_kernel is set.

(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
    set as the hardware PMU does not count while a guest is running (but
    might be extended in future to do so).

In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.

Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.

Since commit:

  82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")

... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:

  5c816728651ae425 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")

Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.

This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.

I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.

Note that this does not remove the need for commit:

  a24d9d9dc096fc0d ("perf parse-events: Make legacy events lower priority than sysfs/JSON")

... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).

Fixes: 82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/print-events.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/tools/perf/util/print-events.c b/tools/perf/util/print-events.c
index b0fc48be623f3..4f67e8f00a4d6 100644
--- a/tools/perf/util/print-events.c
+++ b/tools/perf/util/print-events.c
@@ -232,7 +232,6 @@ void print_sdt_events(const struct print_callbacks *print_cb, void *print_state)
 bool is_event_supported(u8 type, u64 config)
 {
 	bool ret = true;
-	int open_return;
 	struct evsel *evsel;
 	struct perf_event_attr attr = {
 		.type = type,
@@ -246,20 +245,32 @@ bool is_event_supported(u8 type, u64 config)
 
 	evsel = evsel__new(&attr);
 	if (evsel) {
-		open_return = evsel__open(evsel, NULL, tmap);
-		ret = open_return >= 0;
+		ret = evsel__open(evsel, NULL, tmap) >= 0;
 
-		if (open_return == -EACCES) {
+		if (!ret) {
 			/*
-			 * This happens if the paranoid value
+			 * The event may fail to open if the paranoid value
 			 * /proc/sys/kernel/perf_event_paranoid is set to 2
-			 * Re-run with exclude_kernel set; we don't do that
-			 * by default as some ARM machines do not support it.
-			 *
+			 * Re-run with exclude_kernel set; we don't do that by
+			 * default as some ARM machines do not support it.
 			 */
 			evsel->core.attr.exclude_kernel = 1;
 			ret = evsel__open(evsel, NULL, tmap) >= 0;
 		}
+
+		if (!ret) {
+			/*
+			 * The event may fail to open if the PMU requires
+			 * exclude_guest to be set (e.g. as the Apple M1 PMU
+			 * requires).
+			 * Re-run with exclude_guest set; we don't do that by
+			 * default as it's equally legitimate for another PMU
+			 * driver to require that exclude_guest is clear.
+			 */
+			evsel->core.attr.exclude_guest = 1;
+			ret = evsel__open(evsel, NULL, tmap) >= 0;
+		}
+
 		evsel__delete(evsel);
 	}
 
-- 
2.43.0

[PATCH 6.7 496/713] crypto: arm/sha - fix function cast warnings

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 53cc9baeb9bc2a187eb9c9790d30995148852b12 ]

clang-16 warns about casting between incompatible function types:

arch/arm/crypto/sha256_glue.c:37:5: error: cast from 'void (*)(u32 *, const void *, unsigned int)' (aka 'void (*)(unsigned int *, const void *, unsigned int)') to 'sha256_block_fn *' (aka 'void (*)(struct sha256_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   37 |                                 (sha256_block_fn *)sha256_block_data_order);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/sha512-glue.c:34:3: error: cast from 'void (*)(u64 *, const u8 *, int)' (aka 'void (*)(unsigned long long *, const unsigned char *, int)') to 'sha512_block_fn *' (aka 'void (*)(struct sha512_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   34 |                 (sha512_block_fn *)sha512_block_data_order);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the prototypes for the assembler functions to match the typedef.
The code already relies on the digest being the first part of the
state structure, so there is no change in behavior.

Fixes: c80ae7ca3726 ("crypto: arm/sha512 - accelerated SHA-512 using ARM generic ASM and NEON")
Fixes: b59e2ae3690c ("crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/sha256_glue.c | 13 +++++--------
 arch/arm/crypto/sha512-glue.c | 12 +++++-------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
index 433ee4ddce6c8..f85933fdec75f 100644
--- a/arch/arm/crypto/sha256_glue.c
+++ b/arch/arm/crypto/sha256_glue.c
@@ -24,8 +24,8 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
@@ -33,23 +33,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
index 0635a65aa488b..1be5bd498af36 100644
--- a/arch/arm/crypto/sha512-glue.c
+++ b/arch/arm/crypto/sha512-glue.c
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 
-- 
2.43.0

[PATCH 6.7 497/713] crypto: ccp - Avoid discarding errors in psp_send_platform_access_msg()

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 0e8fca2f12ceb77c3a6b6f210135031f264aa612 ]

Errors can potentially occur in the "processing" of PSP commands or
commands can be processed successfully but still return an error code in
the header.

This second case was being discarded because PSP communication worked but
the command returned an error code in the payload header.

Capture both cases and return them to the caller as -EIO for the caller
to investigate. The caller can detect the latter by looking at
`req->header->status`.

Reported-and-tested-by: Tim Van Patten <timvp@google.com>
Fixes: 7ccc4f4e2e50 ("crypto: ccp - Add support for an interface for platform features")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccp/platform-access.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/ccp/platform-access.c b/drivers/crypto/ccp/platform-access.c
index 94367bc49e35b..1b8ed33897332 100644
--- a/drivers/crypto/ccp/platform-access.c
+++ b/drivers/crypto/ccp/platform-access.c
@@ -118,9 +118,16 @@ int psp_send_platform_access_msg(enum psp_platform_access_msg msg,
 		goto unlock;
 	}
 
-	/* Store the status in request header for caller to investigate */
+	/*
+	 * Read status from PSP. If status is non-zero, it indicates an error
+	 * occurred during "processing" of the command.
+	 * If status is zero, it indicates the command was "processed"
+	 * successfully, but the result of the command is in the payload.
+	 * Return both cases to the caller as -EIO to investigate.
+	 */
 	cmd_reg = ioread32(cmd);
-	req->header.status = FIELD_GET(PSP_CMDRESP_STS, cmd_reg);
+	if (FIELD_GET(PSP_CMDRESP_STS, cmd_reg))
+		req->header.status = FIELD_GET(PSP_CMDRESP_STS, cmd_reg);
 	if (req->header.status) {
 		ret = -EIO;
 		goto unlock;
-- 
2.43.0

[PATCH 6.7 498/713] crypto: qat - remove unused macros in qat_comp_alg.c

[Sasha Levin]

From: Adam Guerin <adam.guerin@intel.com>

[ Upstream commit dfff0e35fa5dd84ae75052ba129b0219d83e46dc ]

As a result of the removal of qat_zlib_deflate, some defines where not
removed. Remove them.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:21:9: warning: macro is not used [-Wunused-macros]
       21 | #define QAT_RFC_1950_CM_OFFSET 4
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:16:9: warning: macro is not used [-Wunused-macros]
       16 | #define QAT_RFC_1950_HDR_SIZE 2
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:17:9: warning: macro is not used [-Wunused-macros]
       17 | #define QAT_RFC_1950_FOOTER_SIZE 4
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:22:9: warning: macro is not used [-Wunused-macros]
       22 | #define QAT_RFC_1950_DICT_MASK 0x20
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:18:9: warning: macro is not used [-Wunused-macros]
       18 | #define QAT_RFC_1950_CM_DEFLATE 8
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:20:9: warning: macro is not used [-Wunused-macros]
       20 | #define QAT_RFC_1950_CM_MASK 0x0f
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:23:9: warning: macro is not used [-Wunused-macros]
       23 | #define QAT_RFC_1950_COMP_HDR 0x785e
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:19:9: warning: macro is not used [-Wunused-macros]
       19 | #define QAT_RFC_1950_CM_DEFLATE_CINFO_32K 7
          |         ^

Fixes: e9dd20e0e5f6 ("crypto: qat - Remove zlib-deflate")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/qat/qat_common/qat_comp_algs.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/crypto/intel/qat/qat_common/qat_comp_algs.c b/drivers/crypto/intel/qat/qat_common/qat_comp_algs.c
index bf8c0ee629175..2ba4aa22e0927 100644
--- a/drivers/crypto/intel/qat/qat_common/qat_comp_algs.c
+++ b/drivers/crypto/intel/qat/qat_common/qat_comp_algs.c
@@ -13,15 +13,6 @@
 #include "qat_compression.h"
 #include "qat_algs_send.h"
 
-#define QAT_RFC_1950_HDR_SIZE 2
-#define QAT_RFC_1950_FOOTER_SIZE 4
-#define QAT_RFC_1950_CM_DEFLATE 8
-#define QAT_RFC_1950_CM_DEFLATE_CINFO_32K 7
-#define QAT_RFC_1950_CM_MASK 0x0f
-#define QAT_RFC_1950_CM_OFFSET 4
-#define QAT_RFC_1950_DICT_MASK 0x20
-#define QAT_RFC_1950_COMP_HDR 0x785e
-
 static DEFINE_MUTEX(algs_lock);
 static unsigned int active_devs;
 
-- 
2.43.0

[PATCH 6.7 499/713] crypto: qat - removed unused macro in adf_cnv_dbgfs.c

[Sasha Levin]

From: Adam Guerin <adam.guerin@intel.com>

[ Upstream commit 9a5dcada14d5e027856a1bc38443e54111438da6 ]

This macro was added but never used, remove it.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c:19:9: warning: macro is not used [-Wunused-macros]
       19 | #define CNV_SLICE_ERR_MASK              GENMASK(7, 0)
          |         ^

Fixes: d807f0240c71 ("crypto: qat - add cnv_errors debugfs file")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c b/drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c
index 07119c487da01..627953a72d478 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c
@@ -16,7 +16,6 @@
 
 #define CNV_ERR_INFO_MASK		GENMASK(11, 0)
 #define CNV_ERR_TYPE_MASK		GENMASK(15, 12)
-#define CNV_SLICE_ERR_MASK		GENMASK(7, 0)
 #define CNV_SLICE_ERR_SIGN_BIT_INDEX	7
 #define CNV_DELTA_ERR_SIGN_BIT_INDEX	11
 
-- 
2.43.0

[PATCH 6.7 500/713] crypto: qat - avoid division by zero

[Sasha Levin]

From: Adam Guerin <adam.guerin@intel.com>

[ Upstream commit f99fb7d660f7c818105803f1f1915396a14d18ad ]

Check if delta_us is not zero and return -EINVAL if it is.
delta_us is unlikely to be zero as there is a sleep between the reads of
the two timestamps.

This is to fix the following warning when compiling the QAT driver
using clang scan-build:
    drivers/crypto/intel/qat/qat_common/adf_clock.c:87:9: warning: Division by zero [core.DivideZero]
       87 |         temp = DIV_ROUND_CLOSEST_ULL(temp, delta_us);
          |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: e2980ba57e79 ("crypto: qat - add measure clock frequency")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/qat/qat_common/adf_clock.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/intel/qat/qat_common/adf_clock.c b/drivers/crypto/intel/qat/qat_common/adf_clock.c
index 01e0a389e462b..cf89f57de2a70 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_clock.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_clock.c
@@ -83,6 +83,9 @@ static int measure_clock(struct adf_accel_dev *accel_dev, u32 *frequency)
 	}
 
 	delta_us = timespec_to_us(&ts3) - timespec_to_us(&ts1);
+	if (!delta_us)
+		return -EINVAL;
+
 	temp = (timestamp2 - timestamp1) * ME_CLK_DIVIDER * 10;
 	temp = DIV_ROUND_CLOSEST_ULL(temp, delta_us);
 	/*
-- 
2.43.0

[PATCH 6.7 501/713] crypto: qat - remove double initialization of value

[Sasha Levin]

From: Adam Guerin <adam.guerin@intel.com>

[ Upstream commit a66cf93ab33853f17b8cc33a99263dd0a383a1a1 ]

Remove double initialization of the reg variable.

This is to fix the following warning when compiling the QAT driver
using clang scan-build:
    drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1010:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
     1010 |         u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SSMCPPERR);
          |             ^~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1109:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
     1109 |         u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SER_ERR_SSMSH);
          |             ^~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 99b1c9826e48 ("crypto: qat - count QAT GEN4 errors")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c b/drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c
index 048c246079390..2dd3772bf58a6 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c
@@ -1007,8 +1007,7 @@ static bool adf_handle_spppar_err(struct adf_accel_dev *accel_dev,
 static bool adf_handle_ssmcpppar_err(struct adf_accel_dev *accel_dev,
 				     void __iomem *csr, u32 iastatssm)
 {
-	u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SSMCPPERR);
-	u32 bits_num = BITS_PER_REG(reg);
+	u32 reg, bits_num = BITS_PER_REG(reg);
 	bool reset_required = false;
 	unsigned long errs_bits;
 	u32 bit_iterator;
@@ -1106,8 +1105,7 @@ static bool adf_handle_rf_parr_err(struct adf_accel_dev *accel_dev,
 static bool adf_handle_ser_err_ssmsh(struct adf_accel_dev *accel_dev,
 				     void __iomem *csr, u32 iastatssm)
 {
-	u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SER_ERR_SSMSH);
-	u32 bits_num = BITS_PER_REG(reg);
+	u32 reg, bits_num = BITS_PER_REG(reg);
 	bool reset_required = false;
 	unsigned long errs_bits;
 	u32 bit_iterator;
-- 
2.43.0

[PATCH 6.7 502/713] crypto: qat - relocate and rename get_service_enabled()

[Sasha Levin]

From: Jie Wang <jie.wang@intel.com>

[ Upstream commit 4db87a5f9e3026d72e03bbdf1dac1dc5303e37f7 ]

Move the function get_service_enabled() from adf_4xxx_hw_data.c to
adf_cfg_services.c and rename it as adf_get_service_enabled().
This function is not specific to the 4xxx and will be used by
other QAT drivers.

This does not introduce any functional change.

Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: df018f82002a ("crypto: qat - fix ring to service map for dcc in 4xxx")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../intel/qat/qat_4xxx/adf_4xxx_hw_data.c     | 29 ++-----------------
 .../intel/qat/qat_common/adf_cfg_services.c   | 27 +++++++++++++++++
 .../intel/qat/qat_common/adf_cfg_services.h   |  4 +++
 3 files changed, 34 insertions(+), 26 deletions(-)

diff --git a/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c b/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
index 0faedb5b2eb5a..9763402cd486b 100644
--- a/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
+++ b/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
@@ -120,29 +120,6 @@ static struct adf_hw_device_class adf_4xxx_class = {
 	.instances = 0,
 };
 
-static int get_service_enabled(struct adf_accel_dev *accel_dev)
-{
-	char services[ADF_CFG_MAX_VAL_LEN_IN_BYTES] = {0};
-	int ret;
-
-	ret = adf_cfg_get_param_value(accel_dev, ADF_GENERAL_SEC,
-				      ADF_SERVICES_ENABLED, services);
-	if (ret) {
-		dev_err(&GET_DEV(accel_dev),
-			ADF_SERVICES_ENABLED " param not found\n");
-		return ret;
-	}
-
-	ret = match_string(adf_cfg_services, ARRAY_SIZE(adf_cfg_services),
-			   services);
-	if (ret < 0)
-		dev_err(&GET_DEV(accel_dev),
-			"Invalid value of " ADF_SERVICES_ENABLED " param: %s\n",
-			services);
-
-	return ret;
-}
-
 static u32 get_accel_mask(struct adf_hw_device_data *self)
 {
 	return ADF_4XXX_ACCELERATORS_MASK;
@@ -275,7 +252,7 @@ static u32 get_accel_cap(struct adf_accel_dev *accel_dev)
 		capabilities_dc &= ~ICP_ACCEL_CAPABILITIES_CNV_INTEGRITY64;
 	}
 
-	switch (get_service_enabled(accel_dev)) {
+	switch (adf_get_service_enabled(accel_dev)) {
 	case SVC_CY:
 	case SVC_CY2:
 		return capabilities_sym | capabilities_asym;
@@ -311,7 +288,7 @@ static enum dev_sku_info get_sku(struct adf_hw_device_data *self)
 
 static const u32 *adf_get_arbiter_mapping(struct adf_accel_dev *accel_dev)
 {
-	switch (get_service_enabled(accel_dev)) {
+	switch (adf_get_service_enabled(accel_dev)) {
 	case SVC_DC:
 		return thrd_to_arb_map_dc;
 	case SVC_DCC:
@@ -420,7 +397,7 @@ static u32 uof_get_num_objs(void)
 
 static const struct adf_fw_config *get_fw_config(struct adf_accel_dev *accel_dev)
 {
-	switch (get_service_enabled(accel_dev)) {
+	switch (adf_get_service_enabled(accel_dev)) {
 	case SVC_CY:
 	case SVC_CY2:
 		return adf_fw_cy_config;
diff --git a/drivers/crypto/intel/qat/qat_common/adf_cfg_services.c b/drivers/crypto/intel/qat/qat_common/adf_cfg_services.c
index 8e13fe938959b..2680522944684 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_cfg_services.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_cfg_services.c
@@ -2,6 +2,9 @@
 /* Copyright(c) 2023 Intel Corporation */
 
 #include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include "adf_cfg.h"
 #include "adf_cfg_services.h"
 #include "adf_cfg_strings.h"
 
@@ -18,3 +21,27 @@ const char *const adf_cfg_services[] = {
 	[SVC_SYM_DC] = ADF_CFG_SYM_DC,
 };
 EXPORT_SYMBOL_GPL(adf_cfg_services);
+
+int adf_get_service_enabled(struct adf_accel_dev *accel_dev)
+{
+	char services[ADF_CFG_MAX_VAL_LEN_IN_BYTES] = {0};
+	int ret;
+
+	ret = adf_cfg_get_param_value(accel_dev, ADF_GENERAL_SEC,
+				      ADF_SERVICES_ENABLED, services);
+	if (ret) {
+		dev_err(&GET_DEV(accel_dev),
+			ADF_SERVICES_ENABLED " param not found\n");
+		return ret;
+	}
+
+	ret = match_string(adf_cfg_services, ARRAY_SIZE(adf_cfg_services),
+			   services);
+	if (ret < 0)
+		dev_err(&GET_DEV(accel_dev),
+			"Invalid value of " ADF_SERVICES_ENABLED " param: %s\n",
+			services);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adf_get_service_enabled);
diff --git a/drivers/crypto/intel/qat/qat_common/adf_cfg_services.h b/drivers/crypto/intel/qat/qat_common/adf_cfg_services.h
index f78fd697b4bee..c6b0328b0f5b0 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_cfg_services.h
+++ b/drivers/crypto/intel/qat/qat_common/adf_cfg_services.h
@@ -5,6 +5,8 @@
 
 #include "adf_cfg_strings.h"
 
+struct adf_accel_dev;
+
 enum adf_services {
 	SVC_CY = 0,
 	SVC_CY2,
@@ -21,4 +23,6 @@ enum adf_services {
 
 extern const char *const adf_cfg_services[SVC_COUNT];
 
+int adf_get_service_enabled(struct adf_accel_dev *accel_dev);
+
 #endif
-- 
2.43.0

[PATCH 6.7 503/713] crypto: qat - fix ring to service map for dcc in 4xxx

[Sasha Levin]

From: Damian Muszynski <damian.muszynski@intel.com>

[ Upstream commit df018f82002a8b4dc407bc9a6f416b9241d14415 ]

If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.

Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.

Fixes: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c b/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
index 9763402cd486b..b64aaecdd98ba 100644
--- a/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
+++ b/drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c
@@ -437,6 +437,13 @@ static u16 get_ring_to_svc_map(struct adf_accel_dev *accel_dev)
 	if (!fw_config)
 		return 0;
 
+	/* If dcc, all rings handle compression requests */
+	if (adf_get_service_enabled(accel_dev) == SVC_DCC) {
+		for (i = 0; i < RP_GROUP_COUNT; i++)
+			rps[i] = COMP;
+		goto set_mask;
+	}
+
 	for (i = 0; i < RP_GROUP_COUNT; i++) {
 		switch (fw_config[i].ae_mask) {
 		case ADF_AE_GROUP_0:
@@ -465,6 +472,7 @@ static u16 get_ring_to_svc_map(struct adf_accel_dev *accel_dev)
 		}
 	}
 
+set_mask:
 	ring_to_svc_map = rps[RP_GROUP_0] << ADF_CFG_SERV_RING_PAIR_0_SHIFT |
 			  rps[RP_GROUP_1] << ADF_CFG_SERV_RING_PAIR_1_SHIFT |
 			  rps[RP_GROUP_0] << ADF_CFG_SERV_RING_PAIR_2_SHIFT |
-- 
2.43.0

[PATCH 6.7 504/713] crypto: jitter - fix CRYPTO_JITTERENTROPY help text

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e63df1ec9a16dd9e13e9068243e64876de06f795 ]

Correct various small problems in the help text:
a. change 2 spaces to ", "
b. finish an incomplete sentence
c. change non-working URL to working URL

Fixes: a9a98d49da52 ("crypto: Kconfig - simplify compression/RNG entries")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218458
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Christoph Biedl <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/crypto/Kconfig b/crypto/Kconfig
index 70661f58ee41c..dd5353c5eb24d 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1292,10 +1292,11 @@ config CRYPTO_JITTERENTROPY
 
 	  A non-physical non-deterministic ("true") RNG (e.g., an entropy source
 	  compliant with NIST SP800-90B) intended to provide a seed to a
-	  deterministic RNG (e.g.  per NIST SP800-90C).
+	  deterministic RNG (e.g., per NIST SP800-90C).
 	  This RNG does not perform any cryptographic whitening of the generated
+	  random numbers.
 
-	  See https://www.chronox.de/jent.html
+	  See https://www.chronox.de/jent/
 
 if CRYPTO_JITTERENTROPY
 if CRYPTO_FIPS && EXPERT
-- 
2.43.0

[PATCH 6.7 505/713] drm/tidss: Fix initial plane zpos values

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

[ Upstream commit 3ec948ccb2c4b99e8fbfdd950adbe92ea577b395 ]

When the driver sets up the zpos property it sets the default zpos value
to the HW id of the plane. That is fine as such, but as on many DSS
versions the driver arranges the DRM planes in a different order than
the HW planes (to keep the non-scalable planes first), this leads to odd
initial zpos values. An example is J721e, where the initial zpos values
for DRM planes are 1, 3, 0, 2.

In theory the userspace should configure the zpos values properly when
using multiple planes, and in that sense the initial zpos values
shouldn't matter, but there's really no reason not to fix this and help
the userspace apps which don't handle zpos perfectly. In particular,
some versions of Weston seem to have issues dealing with the planes
with the current default zpos values.

So let's change the zpos values for the DRM planes to 0, 1, 2, 3.

Another option would be to configure the planes marked as primary planes
to zpos 0. On a two display system this would give us plane zpos values
of 0, 0, 1, 2. The end result and behavior would be very similar in this
option, and I'm not aware that this would actually help us in any way.
So, to keep the code simple, I opted for the 0, 1, 2, 3 values.

Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-1-d709e8dfa505@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tidss/tidss_plane.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
index e1c0ef0c3894c..68fed531f6a7f 100644
--- a/drivers/gpu/drm/tidss/tidss_plane.c
+++ b/drivers/gpu/drm/tidss/tidss_plane.c
@@ -213,7 +213,7 @@ struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
 
 	drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
 
-	drm_plane_create_zpos_property(&tplane->plane, hw_plane_id, 0,
+	drm_plane_create_zpos_property(&tplane->plane, tidss->num_planes, 0,
 				       num_planes - 1);
 
 	ret = drm_plane_create_color_properties(&tplane->plane,
-- 
2.43.0

[PATCH 6.7 506/713] drm/tidss: Fix sync-lost issue with two displays

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

[ Upstream commit c079e2e113f2ec2803ba859bbb442a6ab82c96bd ]

A sync lost issue can be observed with two displays, when moving a plane
from one disabled display to an another disabled display, and then
enabling the display to which the plane was moved to. The exact
requirements for this to trigger are not clear.

It looks like the issue is that the layers are left enabled in the first
display's OVR registers. Even if the corresponding VP is disabled, it
still causes an issue, as if the disabled VP and its OVR would still be
in use, leading to the same VID being used by two OVRs. However, this is
just speculation based on testing the DSS behavior.

Experimentation shows that as a workaround, we can disable all the
layers in the OVR when disabling a VP. There should be no downside to
this, as the OVR is anyway effectively disabled if its VP is disabled,
and it seems to solve the sync lost issue.

However, there may be a bigger issue in play here, related to J721e
erratum i2097 ("DSS: Disabling a Layer Connected to Overlay May Result
in Synclost During the Next Frame"). Experimentation also shows that the
OVR's CHANNELIN field has similar issue. So we may need to revisit this
when we find out more about the core issue.

Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-2-d709e8dfa505@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tidss/tidss_crtc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c b/drivers/gpu/drm/tidss/tidss_crtc.c
index 7c78c074e3a2e..1baa4ace12e15 100644
--- a/drivers/gpu/drm/tidss/tidss_crtc.c
+++ b/drivers/gpu/drm/tidss/tidss_crtc.c
@@ -269,6 +269,16 @@ static void tidss_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	reinit_completion(&tcrtc->framedone_completion);
 
+	/*
+	 * If a layer is left enabled when the videoport is disabled, and the
+	 * vid pipeline that was used for the layer is taken into use on
+	 * another videoport, the DSS will report sync lost issues. Disable all
+	 * the layers here as a work-around.
+	 */
+	for (u32 layer = 0; layer < tidss->feat->num_planes; layer++)
+		dispc_ovr_enable_layer(tidss->dispc, tcrtc->hw_videoport, layer,
+				       false);
+
 	dispc_vp_disable(tidss->dispc, tcrtc->hw_videoport);
 
 	if (!wait_for_completion_timeout(&tcrtc->framedone_completion,
-- 
2.43.0

[PATCH 6.7 507/713] clk: imx: imx8mp: Fix SAI_MCLK_SEL definition

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 13269dc6c70444528f0093585e3559cd2f38850a ]

There is SAI1, SAI2, SAI3, SAI5, SAI6, SAI7 existing in this block
control, the order is discontinuous. The definition of SAI_MCLK_SEL(n)
is not match with the usage of CLK_SAIn(n).

So define SAI##n##_MCLK_SEL separately to fix the issue.

Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1708683351-8504-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx8mp-audiomix.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
index e4300df88f1ac..55ed211a5e0b1 100644
--- a/drivers/clk/imx/clk-imx8mp-audiomix.c
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -18,7 +18,12 @@
 
 #define CLKEN0			0x000
 #define CLKEN1			0x004
-#define SAI_MCLK_SEL(n)		(0x300 + 4 * (n))	/* n in 0..5 */
+#define SAI1_MCLK_SEL		0x300
+#define SAI2_MCLK_SEL		0x304
+#define SAI3_MCLK_SEL		0x308
+#define SAI5_MCLK_SEL		0x30C
+#define SAI6_MCLK_SEL		0x310
+#define SAI7_MCLK_SEL		0x314
 #define PDM_SEL			0x318
 #define SAI_PLL_GNRL_CTL	0x400
 
@@ -95,13 +100,13 @@ static const struct clk_parent_data clk_imx8mp_audiomix_pll_bypass_sels[] = {
 		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK1_SEL, {},		\
 		clk_imx8mp_audiomix_sai##n##_mclk1_parents,		\
 		ARRAY_SIZE(clk_imx8mp_audiomix_sai##n##_mclk1_parents), \
-		SAI_MCLK_SEL(n), 1, 0					\
+		SAI##n##_MCLK_SEL, 1, 0					\
 	}, {								\
 		"sai"__stringify(n)"_mclk2_sel",			\
 		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK2_SEL, {},		\
 		clk_imx8mp_audiomix_sai_mclk2_parents,			\
 		ARRAY_SIZE(clk_imx8mp_audiomix_sai_mclk2_parents),	\
-		SAI_MCLK_SEL(n), 4, 1					\
+		SAI##n##_MCLK_SEL, 4, 1					\
 	}, {								\
 		"sai"__stringify(n)"_ipg_cg",				\
 		IMX8MP_CLK_AUDIOMIX_SAI##n##_IPG,			\
-- 
2.43.0

[PATCH 6.7 508/713] mtd: maps: physmap-core: fix flash size larger than 32-bit

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 3884f03edd34887514a0865a80769cd5362d5c3b ]

mtd-ram can potentially be larger than 4GB. get_bitmask_order() uses
fls() that is not guaranteed to work with values larger than 32-bit.
Specifically on aarch64 fls() returns 0 when all 32 LSB bits are clear.
Use fls64() instead.

Fixes: ba32ce95cbd987 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/9fbf3664ce00f8b07867f1011834015f21d162a5.1707388458.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/maps/physmap-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 746a27d15d440..96eb2e782c382 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -518,7 +518,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 		if (!info->maps[i].phys)
 			info->maps[i].phys = res->start;
 
-		info->win_order = get_bitmask_order(resource_size(res)) - 1;
+		info->win_order = fls64(resource_size(res)) - 1;
 		info->maps[i].size = BIT(info->win_order +
 					 (info->gpios ?
 					  info->gpios->ndescs : 0));
-- 
2.43.0

[PATCH 6.7 509/713] mtd: rawnand: lpc32xx_mlc: fix irq handler prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 347b828882e6334690e7003ce5e2fe5f233dc508 ]

clang-16 warns about mismatched function prototypes:

drivers/mtd/nand/raw/lpc32xx_mlc.c:783:29: error: cast from 'irqreturn_t (*)(int, struct lpc32xx_nand_host *)' (aka 'enum irqreturn (*)(int, struct lpc32xx_nand_host *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Change the interrupt handler to the normal way of just passing
a void* pointer and converting it inside the function..

Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240213100146.455811-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/lpc32xx_mlc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 488fd452611a6..677fcb03f9bef 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -303,8 +303,9 @@ static int lpc32xx_nand_device_ready(struct nand_chip *nand_chip)
 	return 0;
 }
 
-static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+static irqreturn_t lpc3xxx_nand_irq(int irq, void *data)
 {
+	struct lpc32xx_nand_host *host = data;
 	uint8_t sr;
 
 	/* Clear interrupt flag by reading status */
@@ -780,7 +781,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 		goto release_dma_chan;
 	}
 
-	if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+	if (request_irq(host->irq, &lpc3xxx_nand_irq,
 			IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
 		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
 		res = -ENXIO;
-- 
2.43.0

[PATCH 6.7 510/713] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit e3741a8d28a1137f8b19ae6f3d6e3be69a454a0a ]

By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.

However there is no justification for this:

* If the codec needs MCLK for its operation, mclk-fs is expected to be set
  according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
  minimum the divider between SCLK and MCLK can do.

Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 1c3d433cefd23..cd5168e826df4 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -264,8 +264,8 @@ static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai,
 	srate = iface->slots * iface->slot_width * params_rate(params);
 
 	if (!iface->mclk_rate) {
-		/* If no specific mclk is requested, default to bit clock * 4 */
-		clk_set_rate(iface->mclk, 4 * srate);
+		/* If no specific mclk is requested, default to bit clock * 2 */
+		clk_set_rate(iface->mclk, 2 * srate);
 	} else {
 		/* Check if we can actually get the bit clock from mclk */
 		if (iface->mclk_rate % srate) {
-- 
2.43.0

[PATCH 6.7 511/713] ASoC: meson: axg-tdm-interface: add frame rate constraint

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 59c6a3a43b221cc2a211181b1298e43b2c2df782 ]

According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.

The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.

Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.

For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.

Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index cd5168e826df4..2cedbce738373 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -12,6 +12,9 @@
 
 #include "axg-tdm.h"
 
+/* Maximum bit clock frequency according the datasheets */
+#define MAX_SCLK 100000000 /* Hz */
+
 enum {
 	TDM_IFACE_PAD,
 	TDM_IFACE_LOOPBACK,
@@ -153,19 +156,27 @@ static int axg_tdm_iface_startup(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	/* Apply component wide rate symmetry */
 	if (snd_soc_component_active(dai->component)) {
+		/* Apply component wide rate symmetry */
 		ret = snd_pcm_hw_constraint_single(substream->runtime,
 						   SNDRV_PCM_HW_PARAM_RATE,
 						   iface->rate);
-		if (ret < 0) {
-			dev_err(dai->dev,
-				"can't set iface rate constraint\n");
-			return ret;
-		}
+
+	} else {
+		/* Limit rate according to the slot number and width */
+		unsigned int max_rate =
+			MAX_SCLK / (iface->slots * iface->slot_width);
+		ret = snd_pcm_hw_constraint_minmax(substream->runtime,
+						   SNDRV_PCM_HW_PARAM_RATE,
+						   0, max_rate);
 	}
 
-	return 0;
+	if (ret < 0)
+		dev_err(dai->dev, "can't set iface rate constraint\n");
+	else
+		ret = 0;
+
+	return ret;
 }
 
 static int axg_tdm_iface_set_stream(struct snd_pcm_substream *substream,
-- 
2.43.0

[PATCH 6.7 512/713] drm/msm/a7xx: Fix LLC typo

[Sasha Levin]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 0776ad9274d96d132131af66a5941df45b9d46b4 ]

We'd miss actually activating LLC.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support")
Patchwork: https://patchwork.freedesktop.org/patch/573043/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 500ed2d183fcc..edc1eeef844ef 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -2416,7 +2416,7 @@ static int a6xx_gmu_pm_resume(struct msm_gpu *gpu)
 
 	msm_devfreq_resume(gpu);
 
-	adreno_is_a7xx(adreno_gpu) ? a7xx_llc_activate : a6xx_llc_activate(a6xx_gpu);
+	adreno_is_a7xx(adreno_gpu) ? a7xx_llc_activate(a6xx_gpu) : a6xx_llc_activate(a6xx_gpu);
 
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 513/713] perf pmu: Fix a potential memory leak in perf_pmu__lookup()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ef5de1613d7d92bdc975e6beb34bb0fa94f34078 ]

The commit in Fixes has reordered some code, but missed an error handling
path.

'goto err' now, in order to avoid a memory leak in case of error.

Fixes: f63a536f03a2 ("perf pmu: Merge JSON events with sysfs at load time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/9538b2b634894c33168dfe9d848d4df31fd4d801.1693085544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/pmu.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index 33e783fc908fe..aaa013af52524 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -1019,10 +1019,9 @@ struct perf_pmu *perf_pmu__lookup(struct list_head *pmus, int dirfd, const char
 	 * type value and format definitions. Load both right
 	 * now.
 	 */
-	if (pmu_format(pmu, dirfd, name)) {
-		free(pmu);
-		return NULL;
-	}
+	if (pmu_format(pmu, dirfd, name))
+		goto err;
+
 	pmu->is_core = is_pmu_core(name);
 	pmu->cpus = pmu_cpumask(dirfd, name, pmu->is_core);
 
-- 
2.43.0

[PATCH 6.7 514/713] HID: amd_sfh: Update HPD sensor structure elements

[Sasha Levin]

From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

[ Upstream commit bbf0dec30696638b8bdc28cb2f5bf23f8d760b52 ]

HPD sensor data is not populating properly because of wrong order of HPD
sensor structure elements. So update the order of structure elements to
match the HPD sensor data received from the firmware.

Fixes: 24a31ea94922 ("HID: amd_sfh: Add initial support for HPD sensor")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
index 70add75fc5066..05e400a4a83e4 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
@@ -90,10 +90,10 @@ enum mem_use_type {
 struct hpd_status {
 	union {
 		struct {
-			u32 human_presence_report : 4;
-			u32 human_presence_actual : 4;
-			u32 probablity		  : 8;
 			u32 object_distance       : 16;
+			u32 probablity		  : 8;
+			u32 human_presence_actual : 4;
+			u32 human_presence_report : 4;
 		} shpd;
 		u32 val;
 	};
-- 
2.43.0

[PATCH 6.7 515/713] HID: amd_sfh: Avoid disabling the interrupt

[Sasha Levin]

From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

[ Upstream commit c1db0073212ef39d5a46c2aea5e49bf884375ce4 ]

HP ProBook x360 435 G7 using older version of firmware which doesn't
support disabling the interrupt for all commands. Hence avoid disabling
the interrupt for that particular model.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218104
Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 30 +++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
index 2530fa98b568b..ce449da08e9ba 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
@@ -35,6 +35,8 @@ static int sensor_mask_override = -1;
 module_param_named(sensor_mask, sensor_mask_override, int, 0444);
 MODULE_PARM_DESC(sensor_mask, "override the detected sensors mask");
 
+static bool intr_disable = true;
+
 static int amd_sfh_wait_response_v2(struct amd_mp2_dev *mp2, u8 sid, u32 sensor_sts)
 {
 	union cmd_response cmd_resp;
@@ -55,7 +57,7 @@ static void amd_start_sensor_v2(struct amd_mp2_dev *privdata, struct amd_mp2_sen
 
 	cmd_base.ul = 0;
 	cmd_base.cmd_v2.cmd_id = ENABLE_SENSOR;
-	cmd_base.cmd_v2.intr_disable = 1;
+	cmd_base.cmd_v2.intr_disable = intr_disable;
 	cmd_base.cmd_v2.period = info.period;
 	cmd_base.cmd_v2.sensor_id = info.sensor_idx;
 	cmd_base.cmd_v2.length = 16;
@@ -73,7 +75,7 @@ static void amd_stop_sensor_v2(struct amd_mp2_dev *privdata, u16 sensor_idx)
 
 	cmd_base.ul = 0;
 	cmd_base.cmd_v2.cmd_id = DISABLE_SENSOR;
-	cmd_base.cmd_v2.intr_disable = 1;
+	cmd_base.cmd_v2.intr_disable = intr_disable;
 	cmd_base.cmd_v2.period = 0;
 	cmd_base.cmd_v2.sensor_id = sensor_idx;
 	cmd_base.cmd_v2.length  = 16;
@@ -87,7 +89,7 @@ static void amd_stop_all_sensor_v2(struct amd_mp2_dev *privdata)
 	union sfh_cmd_base cmd_base;
 
 	cmd_base.cmd_v2.cmd_id = STOP_ALL_SENSORS;
-	cmd_base.cmd_v2.intr_disable = 1;
+	cmd_base.cmd_v2.intr_disable = intr_disable;
 	cmd_base.cmd_v2.period = 0;
 	cmd_base.cmd_v2.sensor_id = 0;
 
@@ -292,6 +294,26 @@ int amd_sfh_irq_init(struct amd_mp2_dev *privdata)
 	return 0;
 }
 
+static int mp2_disable_intr(const struct dmi_system_id *id)
+{
+	intr_disable = false;
+	return 0;
+}
+
+static const struct dmi_system_id dmi_sfh_table[] = {
+	{
+		/*
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=218104
+		 */
+		.callback = mp2_disable_intr,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook x360 435 G7"),
+		},
+	},
+	{}
+};
+
 static const struct dmi_system_id dmi_nodevs[] = {
 	{
 		/*
@@ -315,6 +337,8 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	if (dmi_first_match(dmi_nodevs))
 		return -ENODEV;
 
+	dmi_check_system(dmi_sfh_table);
+
 	privdata = devm_kzalloc(&pdev->dev, sizeof(*privdata), GFP_KERNEL);
 	if (!privdata)
 		return -ENOMEM;
-- 
2.43.0

[PATCH 6.7 516/713] drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 7cf1ad2fe10634238b38442a851d89514cb14ea2 ]

Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/atom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/atom.c b/drivers/gpu/drm/amd/amdgpu/atom.c
index 2c221000782cd..1b51be9b5f36b 100644
--- a/drivers/gpu/drm/amd/amdgpu/atom.c
+++ b/drivers/gpu/drm/amd/amdgpu/atom.c
@@ -313,7 +313,7 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr,
 				DEBUG("IMM 0x%02X\n", val);
 			return val;
 		}
-		return 0;
+		break;
 	case ATOM_ARG_PLL:
 		idx = U8(*ptr);
 		(*ptr)++;
-- 
2.43.0

[PATCH 6.7 517/713] media: pvrusb2: fix uaf in pvr2_context_set_notify

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit 0a0b79ea55de8514e1750884e5fec77f9fdd01ee ]

[Syzbot reported]
BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26

CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0xc4/0x620 mm/kasan/report.c:488
 kasan_report+0xda/0x110 mm/kasan/report.c:601
 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline]
 pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272

Freed by task 906:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640
poison_slab_object mm/kasan/common.c:241 [inline]
__kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2121 [inline]
slab_free mm/slub.c:4299 [inline]
kfree+0x105/0x340 mm/slub.c:4409
pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline]
pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158

[Analyze]
Task A set disconnect_flag = !0, which resulted in Task B's condition being met
and releasing mp, leading to this issue.

[Fix]
Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect()
to avoid this issue.

Reported-and-tested-by: syzbot+ce750e124675d4599449@syzkaller.appspotmail.com
Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 58f2f3ff10ee2..73c95ba2328a4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -267,9 +267,9 @@ static void pvr2_context_exit(struct pvr2_context *mp)
 void pvr2_context_disconnect(struct pvr2_context *mp)
 {
 	pvr2_hdw_disconnect(mp->hdw);
-	mp->disconnect_flag = !0;
 	if (!pvr2_context_shutok())
 		pvr2_context_notify(mp);
+	mp->disconnect_flag = !0;
 }
 
 
-- 
2.43.0

[PATCH 6.7 518/713] media: dvb-frontends: avoid stack overflow warnings with clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 7a4cf27d1f0538f779bf31b8c99eda394e277119 ]

A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:

drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)

Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled.

Fixes: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/stv0367.c | 34 +++++++--------------------
 1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index 48326434488c4..72540ef4e5f88 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -118,50 +118,32 @@ static const s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_S
 	}
 };
 
-static
-int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
+static noinline_for_stack
+int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
 {
-	u8 buf[MAX_XFER_SIZE];
+	u8 buf[3] = { MSB(reg), LSB(reg), data };
 	struct i2c_msg msg = {
 		.addr = state->config->demod_address,
 		.flags = 0,
 		.buf = buf,
-		.len = len + 2
+		.len = 3,
 	};
 	int ret;
 
-	if (2 + len > sizeof(buf)) {
-		printk(KERN_WARNING
-		       "%s: i2c wr reg=%04x: len=%d is too big!\n",
-		       KBUILD_MODNAME, reg, len);
-		return -EINVAL;
-	}
-
-
-	buf[0] = MSB(reg);
-	buf[1] = LSB(reg);
-	memcpy(buf + 2, data, len);
-
 	if (i2cdebug)
 		printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
-			state->config->demod_address, reg, buf[2]);
+			state->config->demod_address, reg, data);
 
 	ret = i2c_transfer(state->i2c, &msg, 1);
 	if (ret != 1)
 		printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n",
-			__func__, state->config->demod_address, reg, buf[2]);
+			__func__, state->config->demod_address, reg, data);
 
 	return (ret != 1) ? -EREMOTEIO : 0;
 }
 
-static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
-{
-	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
-
-	return stv0367_writeregs(state, reg, &tmp, 1);
-}
-
-static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
+static noinline_for_stack
+u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
 {
 	u8 b0[] = { 0, 0 };
 	u8 b1[] = { 0 };
-- 
2.43.0

[PATCH 6.7 519/713] media: go7007: fix a memleak in go7007_load_encoder

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit b9b683844b01d171a72b9c0419a2d760d946ee12 ]

In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without
a deallocation thereafter. After the following call chain:

saa7134_go7007_init
  |-> go7007_boot_encoder
        |-> go7007_load_encoder
  |-> kfree(go)

go is freed and thus bounce is leaked.

Fixes: 95ef39403f89 ("[media] go7007: remember boot firmware")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-driver.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/go7007/go7007-driver.c b/drivers/media/usb/go7007/go7007-driver.c
index 0c24e29843048..eb03f98b2ef11 100644
--- a/drivers/media/usb/go7007/go7007-driver.c
+++ b/drivers/media/usb/go7007/go7007-driver.c
@@ -80,7 +80,7 @@ static int go7007_load_encoder(struct go7007 *go)
 	const struct firmware *fw_entry;
 	char fw_name[] = "go7007/go7007fw.bin";
 	void *bounce;
-	int fw_len, rv = 0;
+	int fw_len;
 	u16 intr_val, intr_data;
 
 	if (go->boot_fw == NULL) {
@@ -109,9 +109,11 @@ static int go7007_load_encoder(struct go7007 *go)
 	    go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
 			(intr_val & ~0x1) != 0x5a5a) {
 		v4l2_err(go, "error transferring firmware\n");
-		rv = -1;
+		kfree(go->boot_fw);
+		go->boot_fw = NULL;
+		return -1;
 	}
-	return rv;
+	return 0;
 }
 
 MODULE_FIRMWARE("go7007/go7007fw.bin");
-- 
2.43.0

[PATCH 6.7 520/713] media: ttpci: fix two memleaks in budget_av_attach

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit d0b07f712bf61e1a3cf23c87c663791c42e50837 ]

When saa7146_register_device and saa7146_vv_init fails, budget_av_attach
should free the resources it allocates, like the error-handling of
ttpci_budget_init does. Besides, there are two fixme comment refers to
such deallocations.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/ttpci/budget-av.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c
index 230b104a7cdf0..a47c5850ef875 100644
--- a/drivers/media/pci/ttpci/budget-av.c
+++ b/drivers/media/pci/ttpci/budget-av.c
@@ -1463,7 +1463,8 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 		budget_av->has_saa7113 = 1;
 		err = saa7146_vv_init(dev, &vv_data);
 		if (err != 0) {
-			/* fixme: proper cleanup here */
+			ttpci_budget_deinit(&budget_av->budget);
+			kfree(budget_av);
 			ERR("cannot init vv subsystem\n");
 			return err;
 		}
@@ -1472,9 +1473,10 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 		vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
 
 		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_VIDEO))) {
-			/* fixme: proper cleanup here */
-			ERR("cannot register capture v4l2 device\n");
 			saa7146_vv_release(dev);
+			ttpci_budget_deinit(&budget_av->budget);
+			kfree(budget_av);
+			ERR("cannot register capture v4l2 device\n");
 			return err;
 		}
 
-- 
2.43.0

[PATCH 6.7 521/713] media: mediatek: vcodec: avoid -Wcast-function-type-strict warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit bfb1b99802ef16045402deb855c197591dc78886 ]

The ipi handler here tries hard to maintain const-ness of its argument,
but by doing that causes a warning about function type casts:

drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c:38:32: error: cast from 'mtk_vcodec_ipi_handler' (aka 'void (*)(void *, unsigned int, void *)') to 'ipi_handler_t' (aka 'void (*)(const void *, unsigned int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   38 |         ipi_handler_t handler_const = (ipi_handler_t)handler;
      |                                       ^~~~~~~~~~~~~~~~~~~~~~

Remove the hack and just use a non-const argument.

Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c      |  2 +-
 .../mediatek/vcodec/common/mtk_vcodec_fw_vpu.c         | 10 +---------
 drivers/media/platform/mediatek/vpu/mtk_vpu.c          |  2 +-
 drivers/media/platform/mediatek/vpu/mtk_vpu.h          |  2 +-
 4 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c b/drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c
index b065ccd069140..378a1cba0144f 100644
--- a/drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c
+++ b/drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c
@@ -26,7 +26,7 @@ static void mtk_mdp_vpu_handle_init_ack(const struct mdp_ipi_comm_ack *msg)
 	vpu->inst_addr = msg->vpu_inst_addr;
 }
 
-static void mtk_mdp_vpu_ipi_handler(const void *data, unsigned int len,
+static void mtk_mdp_vpu_ipi_handler(void *data, unsigned int len,
 				    void *priv)
 {
 	const struct mdp_ipi_comm_ack *msg = data;
diff --git a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c
index 9f6e4b59455da..4c34344dc7dcb 100644
--- a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c
+++ b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c
@@ -29,15 +29,7 @@ static int mtk_vcodec_vpu_set_ipi_register(struct mtk_vcodec_fw *fw, int id,
 					   mtk_vcodec_ipi_handler handler,
 					   const char *name, void *priv)
 {
-	/*
-	 * The handler we receive takes a void * as its first argument. We
-	 * cannot change this because it needs to be passed down to the rproc
-	 * subsystem when SCP is used. VPU takes a const argument, which is
-	 * more constrained, so the conversion below is safe.
-	 */
-	ipi_handler_t handler_const = (ipi_handler_t)handler;
-
-	return vpu_ipi_register(fw->pdev, id, handler_const, name, priv);
+	return vpu_ipi_register(fw->pdev, id, handler, name, priv);
 }
 
 static int mtk_vcodec_vpu_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
diff --git a/drivers/media/platform/mediatek/vpu/mtk_vpu.c b/drivers/media/platform/mediatek/vpu/mtk_vpu.c
index 7243604a82a5b..724ae7c2ab3ba 100644
--- a/drivers/media/platform/mediatek/vpu/mtk_vpu.c
+++ b/drivers/media/platform/mediatek/vpu/mtk_vpu.c
@@ -635,7 +635,7 @@ int vpu_load_firmware(struct platform_device *pdev)
 }
 EXPORT_SYMBOL_GPL(vpu_load_firmware);
 
-static void vpu_init_ipi_handler(const void *data, unsigned int len, void *priv)
+static void vpu_init_ipi_handler(void *data, unsigned int len, void *priv)
 {
 	struct mtk_vpu *vpu = priv;
 	const struct vpu_run *run = data;
diff --git a/drivers/media/platform/mediatek/vpu/mtk_vpu.h b/drivers/media/platform/mediatek/vpu/mtk_vpu.h
index a56053ff135af..da05f3e740810 100644
--- a/drivers/media/platform/mediatek/vpu/mtk_vpu.h
+++ b/drivers/media/platform/mediatek/vpu/mtk_vpu.h
@@ -17,7 +17,7 @@
  * VPU interfaces with other blocks by share memory and interrupt.
  */
 
-typedef void (*ipi_handler_t) (const void *data,
+typedef void (*ipi_handler_t) (void *data,
 			       unsigned int len,
 			       void *priv);
 
-- 
2.43.0

[PATCH 6.7 522/713] arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit a743f26d03a96593c0f3d05dc26b388f45de67c9 ]

Per commit b3f11af9b2ce ("arm64: ftrace: forbid CALL_OPS with
CC_OPTIMIZE_FOR_SIZE"), GCC is silently ignoring `-falign-functions=N`
when passed `-Os`, causing functions to be improperly aligned. This
doesn't seem to be a problem with Clang though, where enabling CALL_OPS
with CC_OPTIMIZE_FOR_SIZE doesn't spit out any warnings at boot about
misaligned patch-sites. Only forbid CALL_OPS if GCC is used and we're
optimizing for size so that CALL_OPS can be used with clang optimizing
for size.

Cc: Jason Ling <jasonling@chromium.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: llvm@lists.linux.dev
Fixes: b3f11af9b2ce ("arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240223064032.3463229-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 456e8680e16ea..77dfbc8ab2d3b 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -196,7 +196,7 @@ config ARM64
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
 		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
-		    !CC_OPTIMIZE_FOR_SIZE)
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
-- 
2.43.0

[PATCH 6.7 523/713] drm/tests: helpers: Include missing drm_drv header

[Sasha Levin]

From: Maxime Ripard <mripard@kernel.org>

[ Upstream commit 73984daf07a1a89ace8f0db6dd2d640654ebbbee ]

We have a few functions declared in our kunit helpers header, some of
them dereferencing the struct drm_driver.

However, we don't include the drm_drv.h header file defining that
structure, leading to compilation errors if we don't include both
headers.

Fixes: d98780310719 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-1-8f4af575fce2@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_kunit_helpers.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/drm/drm_kunit_helpers.h b/include/drm/drm_kunit_helpers.h
index ba483c87f0e7b..3ae19892229db 100644
--- a/include/drm/drm_kunit_helpers.h
+++ b/include/drm/drm_kunit_helpers.h
@@ -3,6 +3,8 @@
 #ifndef DRM_KUNIT_HELPERS_H_
 #define DRM_KUNIT_HELPERS_H_
 
+#include <drm/drm_drv.h>
+
 #include <linux/device.h>
 
 #include <kunit/test.h>
-- 
2.43.0

[PATCH 6.7 524/713] drm/amd/pm: Fix esm reg mask use to get pcie speed

[Sasha Levin]

From: Asad Kamal <asad.kamal@amd.com>

[ Upstream commit b485b899e5b8f83723833feca30a1a1e3df778df ]

Fix mask used for esm ctrl register to get pcie link
speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6

Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support")
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Fixes: f1c378593153 ("drm/amd/powerplay: add Arcturus support for gpu metrics export")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c    | 4 ++--
 drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c   | 4 ++--
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
index b9c5398cb986c..294a890beceb4 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
@@ -2272,8 +2272,8 @@ static uint16_t arcturus_get_current_pcie_link_speed(struct smu_context *smu)
 
 	/* TODO: confirm this on real target */
 	esm_ctrl = RREG32_PCIE(smnPCIE_ESM_CTRL);
-	if ((esm_ctrl >> 15) & 0x1FFFF)
-		return (uint16_t)(((esm_ctrl >> 8) & 0x3F) + 128);
+	if ((esm_ctrl >> 15) & 0x1)
+		return (uint16_t)(((esm_ctrl >> 8) & 0x7F) + 128);
 
 	return smu_v11_0_get_current_pcie_link_speed(smu);
 }
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index f1440869d1ce0..e3579a8fd7fcf 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1683,8 +1683,8 @@ static int aldebaran_get_current_pcie_link_speed(struct smu_context *smu)
 
 	/* TODO: confirm this on real target */
 	esm_ctrl = RREG32_PCIE(smnPCIE_ESM_CTRL);
-	if ((esm_ctrl >> 15) & 0x1FFFF)
-		return (((esm_ctrl >> 8) & 0x3F) + 128);
+	if ((esm_ctrl >> 15) & 0x1)
+		return (((esm_ctrl >> 8) & 0x7F) + 128);
 
 	return smu_v13_0_get_current_pcie_link_speed(smu);
 }
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
index 8cd2b8cc3d58a..58f63b7a72cd9 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c
@@ -2016,8 +2016,8 @@ static int smu_v13_0_6_get_current_pcie_link_speed(struct smu_context *smu)
 
 	/* TODO: confirm this on real target */
 	esm_ctrl = RREG32_PCIE(smnPCIE_ESM_CTRL);
-	if ((esm_ctrl >> 15) & 0x1FFFF)
-		return (((esm_ctrl >> 8) & 0x3F) + 128);
+	if ((esm_ctrl >> 15) & 0x1)
+		return (((esm_ctrl >> 8) & 0x7F) + 128);
 
 	speed_level = (RREG32_PCIE(smnPCIE_LC_SPEED_CNTL) &
 		PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE_MASK)
-- 
2.43.0

[PATCH 6.7 525/713] gpio: nomadik: fix offset bug in nmk_pmx_set()

[Sasha Levin]

From: Théo Lebrun <theo.lebrun@bootlin.com>

[ Upstream commit 53cf6b72e074864b94ade97dcb6f30b5ac1a82dc ]

Previously, the statement looked like:

    slpm[x] &= ~BIT(g->grp.pins[i]);

Where:
 - slpm is a unsigned int pointer;
 - g->grp.pins[i] is a pin number. It can grow to more than 32.

The expected shift amount is a pin bank offset.

This bug does not occur on every group or pin: the altsetting must be
NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured.
For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the
right altsetting and pins 229 and 230.

Fixes: dbfe8ca259e1 ("pinctrl/nomadik: implement pin multiplexing")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-5-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/nomadik/pinctrl-nomadik.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 863732287b1e5..445c61a4a7e55 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1575,8 +1575,10 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
 		 * Then mask the pins that need to be sleeping now when we're
 		 * switching to the ALT C function.
 		 */
-		for (i = 0; i < g->grp.npins; i++)
-			slpm[g->grp.pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->grp.pins[i]);
+		for (i = 0; i < g->grp.npins; i++) {
+			unsigned int bit = g->grp.pins[i] % NMK_GPIO_PER_CHIP;
+			slpm[g->grp.pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(bit);
+		}
 		nmk_gpio_glitch_slpm_init(slpm);
 	}
 
-- 
2.43.0

[PATCH 6.7 526/713] drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit c958e86e9cc1b48cac004a6e245154dfba8e163b ]

It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().

pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.

Consider the following case:

CPU1                              CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
                                  step 1:
                                  mtk_drm_crtc_atomic_flush:
                                  mtk_drm_crtc_update_config(
                                      !!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
                                  pending_needs_vblank set to true,

                                  step 2:
                                  mtk_crtc_ddp_irq ->
                                  mtk_drm_finish_page_flip called again,
                                  pending_needs_vblank is still true
                                  //null pointer

Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index db43f9dff912e..d645b85f97215 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -95,11 +95,13 @@ static void mtk_drm_crtc_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
 	struct drm_crtc *crtc = &mtk_crtc->base;
 	unsigned long flags;
 
-	spin_lock_irqsave(&crtc->dev->event_lock, flags);
-	drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
-	drm_crtc_vblank_put(crtc);
-	mtk_crtc->event = NULL;
-	spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	if (mtk_crtc->event) {
+		spin_lock_irqsave(&crtc->dev->event_lock, flags);
+		drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
+		drm_crtc_vblank_put(crtc);
+		mtk_crtc->event = NULL;
+		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	}
 }
 
 static void mtk_drm_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
-- 
2.43.0

[PATCH 6.7 527/713] mfd: cs42l43: Fix wrong register defaults

[Sasha Levin]

From: Maciej Strozek <mstrozek@opensource.cirrus.com>

[ Upstream commit c9e1e505cde1a8ddd0968b4d54ec2ea1937dfe00 ]

A few regs have unnecessary values in defaults, change them to match the
datasheet

Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240229155616.118457-1-mstrozek@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/cs42l43.c | 68 +++++++++++++++++++++----------------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c
index 7b6d07cbe6fc6..73c88ee6a866c 100644
--- a/drivers/mfd/cs42l43.c
+++ b/drivers/mfd/cs42l43.c
@@ -131,38 +131,38 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
 	{ CS42L43_ASP_TX_CH4_CTRL,			0x00170091 },
 	{ CS42L43_ASP_TX_CH5_CTRL,			0x001700C1 },
 	{ CS42L43_ASP_TX_CH6_CTRL,			0x001700F1 },
-	{ CS42L43_ASPTX1_INPUT,				0x00800000 },
-	{ CS42L43_ASPTX2_INPUT,				0x00800000 },
-	{ CS42L43_ASPTX3_INPUT,				0x00800000 },
-	{ CS42L43_ASPTX4_INPUT,				0x00800000 },
-	{ CS42L43_ASPTX5_INPUT,				0x00800000 },
-	{ CS42L43_ASPTX6_INPUT,				0x00800000 },
-	{ CS42L43_SWIRE_DP1_CH1_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP1_CH2_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP1_CH3_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP1_CH4_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP2_CH1_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP2_CH2_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP3_CH1_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP3_CH2_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP4_CH1_INPUT,			0x00800000 },
-	{ CS42L43_SWIRE_DP4_CH2_INPUT,			0x00800000 },
-	{ CS42L43_ASRC_INT1_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_INT2_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_INT3_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_INT4_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_DEC1_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_DEC2_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_DEC3_INPUT1,			0x00800000 },
-	{ CS42L43_ASRC_DEC4_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC1INT1_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC1INT2_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC1DEC1_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC1DEC2_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC2INT1_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC2INT2_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC2DEC1_INPUT1,			0x00800000 },
-	{ CS42L43_ISRC2DEC2_INPUT1,			0x00800000 },
+	{ CS42L43_ASPTX1_INPUT,				0x00000000 },
+	{ CS42L43_ASPTX2_INPUT,				0x00000000 },
+	{ CS42L43_ASPTX3_INPUT,				0x00000000 },
+	{ CS42L43_ASPTX4_INPUT,				0x00000000 },
+	{ CS42L43_ASPTX5_INPUT,				0x00000000 },
+	{ CS42L43_ASPTX6_INPUT,				0x00000000 },
+	{ CS42L43_SWIRE_DP1_CH1_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP1_CH2_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP1_CH3_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP1_CH4_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP2_CH1_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP2_CH2_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP3_CH1_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP3_CH2_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP4_CH1_INPUT,			0x00000000 },
+	{ CS42L43_SWIRE_DP4_CH2_INPUT,			0x00000000 },
+	{ CS42L43_ASRC_INT1_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_INT2_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_INT3_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_INT4_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_DEC1_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_DEC2_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_DEC3_INPUT1,			0x00000000 },
+	{ CS42L43_ASRC_DEC4_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC1INT1_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC1INT2_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC1DEC1_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC1DEC2_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC2INT1_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC2INT2_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC2DEC1_INPUT1,			0x00000000 },
+	{ CS42L43_ISRC2DEC2_INPUT1,			0x00000000 },
 	{ CS42L43_EQ1MIX_INPUT1,			0x00800000 },
 	{ CS42L43_EQ1MIX_INPUT2,			0x00800000 },
 	{ CS42L43_EQ1MIX_INPUT3,			0x00800000 },
@@ -171,8 +171,8 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
 	{ CS42L43_EQ2MIX_INPUT2,			0x00800000 },
 	{ CS42L43_EQ2MIX_INPUT3,			0x00800000 },
 	{ CS42L43_EQ2MIX_INPUT4,			0x00800000 },
-	{ CS42L43_SPDIF1_INPUT1,			0x00800000 },
-	{ CS42L43_SPDIF2_INPUT1,			0x00800000 },
+	{ CS42L43_SPDIF1_INPUT1,			0x00000000 },
+	{ CS42L43_SPDIF2_INPUT1,			0x00000000 },
 	{ CS42L43_AMP1MIX_INPUT1,			0x00800000 },
 	{ CS42L43_AMP1MIX_INPUT2,			0x00800000 },
 	{ CS42L43_AMP1MIX_INPUT3,			0x00800000 },
-- 
2.43.0

[PATCH 6.7 528/713] powerpc/32: fix ADB_CUDA kconfig warning

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit b72c066ba85a131091498a15a62d6068997278a4 ]

Fix a (randconfig) kconfig warning by correcting the select
statement:

WARNING: unmet direct dependencies detected for ADB_CUDA
  Depends on [n]: MACINTOSH_DRIVERS [=n] && (ADB [=n] || PPC_PMAC [=y]) && !PPC_PMAC64 [=n]
  Selected by [y]:
  - PPC_PMAC [=y] && PPC_BOOK3S [=y] && CPU_BIG_ENDIAN [=y] && POWER_RESET [=y] && PPC32 [=y]

The PPC32 isn't needed because ADB depends on (PPC_PMAC && PPC32).

Fixes: a3ef2fef198c ("powerpc/32: Add dependencies of POWER_RESET for pmac32")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240211221623.31112-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powermac/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 8bdae0caf21e5..84f101ec53a96 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -2,7 +2,7 @@
 config PPC_PMAC
 	bool "Apple PowerMac based machines"
 	depends on PPC_BOOK3S && CPU_BIG_ENDIAN
-	select ADB_CUDA if POWER_RESET && PPC32
+	select ADB_CUDA if POWER_RESET && ADB
 	select MPIC
 	select FORCE_PCI
 	select PPC_INDIRECT_PCI if PPC32
-- 
2.43.0

[PATCH 6.7 529/713] powerpc/pseries: Fix potential memleak in papr_get_attr()

[Sasha Levin]

From: Qiheng Lin <linqiheng@huawei.com>

[ Upstream commit cda9c0d556283e2d4adaa9960b2dc19b16156bae ]

`buf` is allocated in papr_get_attr(), and krealloc() of `buf`
could fail. We need to free the original `buf` in the case of failure.

Fixes: 3c14b73454cf ("powerpc/pseries: Interface to represent PAPR firmware attributes")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221208133449.16284-1-linqiheng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/papr_platform_attributes.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/papr_platform_attributes.c b/arch/powerpc/platforms/pseries/papr_platform_attributes.c
index 526c621b098be..eea2041b270b5 100644
--- a/arch/powerpc/platforms/pseries/papr_platform_attributes.c
+++ b/arch/powerpc/platforms/pseries/papr_platform_attributes.c
@@ -101,10 +101,12 @@ static int papr_get_attr(u64 id, struct energy_scale_attribute *esi)
 		esi_buf_size = ESI_HDR_SIZE + (CURR_MAX_ESI_ATTRS * max_esi_attrs);
 
 		temp_buf = krealloc(buf, esi_buf_size, GFP_KERNEL);
-		if (temp_buf)
+		if (temp_buf) {
 			buf = temp_buf;
-		else
-			return -ENOMEM;
+		} else {
+			ret = -ENOMEM;
+			goto out_buf;
+		}
 
 		goto retry;
 	}
-- 
2.43.0

[PATCH 6.7 530/713] powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks

[Sasha Levin]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ]

Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:

 ---Logs---
 # perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
  hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]

 # perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

 Performance counter stats for 'system wide':

   <not supported>      hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

       2.000700771 seconds time elapsed

The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.

Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.

Result after fix patch changes:

 # perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.

Fixes: 220a0c609ad1 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/hv-gpci.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 27f18119fda17..241551d1282f8 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -695,6 +695,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 
 	ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
 			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+
+	/*
+	 * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL',
+	 * specifies that the current buffer size cannot accommodate
+	 * all the information and a partial buffer returned.
+	 * Since in this function we are only accessing data for a given starting index,
+	 * we don't need to accommodate whole data and can get required count by
+	 * accessing first entry data.
+	 * Hence hcall fails only incase the ret value is other than H_SUCCESS or
+	 * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B).
+	 */
+	if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B)
+		ret = 0;
+
 	if (ret) {
 		pr_devel("hcall failed: 0x%lx\n", ret);
 		goto out;
@@ -759,6 +773,7 @@ static int h_gpci_event_init(struct perf_event *event)
 {
 	u64 count;
 	u8 length;
+	unsigned long ret;
 
 	/* Not our event */
 	if (event->attr.type != event->pmu->type)
@@ -789,13 +804,23 @@ static int h_gpci_event_init(struct perf_event *event)
 	}
 
 	/* check if the request works... */
-	if (single_gpci_request(event_get_request(event),
+	ret = single_gpci_request(event_get_request(event),
 				event_get_starting_index(event),
 				event_get_secondary_index(event),
 				event_get_counter_info_version(event),
 				event_get_offset(event),
 				length,
-				&count)) {
+				&count);
+
+	/*
+	 * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
+	 * performance information, and required to set
+	 * "Enable Performance Information Collection" option.
+	 */
+	if (ret == H_AUTHORITY)
+		return -EPERM;
+
+	if (ret) {
 		pr_devel("gpci hcall failed\n");
 		return -EINVAL;
 	}
-- 
2.43.0

[PATCH 6.7 531/713] clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'

[Sasha Levin]

From: Gabor Juhos <j4g8y7@gmail.com>

[ Upstream commit f982adcc1b1c02a3114f68ac73c811cbfabe90fa ]

The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk'
clock definition seems wrong as it is greater than the
'max_register' value defined in the regmap configuration.
Additionally, all other gmac specific branch clock definitions
within the driver uses the same value both for the 'enable_reg'
and for the 'halt_reg' fields.

Due to the lack of documentation the correct value is not known.
Looking into the downstream driver does not help either, as that
uses the same (presumably wrong) value [1].

Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk'
to use the value from the 'halt_reg' field so it follows the pattern
used in other gmac clock definitions. The change is based on the
assumption that the register layout of this clock is the same
as the other gmac clocks.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-ipq5018.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c
index 4aba47e8700d2..cef9a1e7c9fdb 100644
--- a/drivers/clk/qcom/gcc-ipq5018.c
+++ b/drivers/clk/qcom/gcc-ipq5018.c
@@ -1754,7 +1754,7 @@ static struct clk_branch gcc_gmac0_sys_clk = {
 	.halt_check = BRANCH_HALT_DELAY,
 	.halt_bit = 31,
 	.clkr = {
-		.enable_reg = 0x683190,
+		.enable_reg = 0x68190,
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data) {
 			.name = "gcc_gmac0_sys_clk",
-- 
2.43.0

[PATCH 6.7 532/713] clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'

[Sasha Levin]

From: Gabor Juhos <j4g8y7@gmail.com>

[ Upstream commit 11b752ac5a07cbfd95592fac5237a02f45662926 ]

The following table shows the values of the 'halt_reg' and the
'enable_reg' fields from the pcie clocks defined in the current
driver:

  clock                        halt_reg    enable_reg

  gcc_pcie0_ahb_clk            0x75010     0x75010
  gcc_pcie0_aux_clk            0x75014     0x75014
  gcc_pcie0_axi_m_clk          0x75008     0x75008
  gcc_pcie0_axi_s_bridge_clk   0x75048     0x75048
  gcc_pcie0_axi_s_clk          0x7500c     0x7500c
  gcc_pcie0_pipe_clk           0x75018     0x75018

  gcc_pcie1_ahb_clk            0x76010     0x76010
  gcc_pcie1_aux_clk            0x76014     0x76014
  gcc_pcie1_axi_m_clk          0x76008     0x76008
  gcc_pcie1_axi_s_bridge_clk   0x76048     0x76048
  gcc_pcie1_axi_s_clk          0x7600c     0x7600c
  gcc_pcie1_pipe_clk                 8*    0x76018

Based on the table, it is quite likely that the pcie0 and the pci1
clocks are using the same register layout, however it seems that
the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
is wrong.

In the downstream driver [1], the same '0x76018' value is used for
both the 'halt_reg' and for the 'enable_reg' fields of the
'gcc_pcie1_pipe_clk' clock.

Update the current driver to use the same value used downstream as
probably that is the correct value.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-ipq5018.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c
index cef9a1e7c9fdb..5e81cfa77293a 100644
--- a/drivers/clk/qcom/gcc-ipq5018.c
+++ b/drivers/clk/qcom/gcc-ipq5018.c
@@ -2180,7 +2180,7 @@ static struct clk_branch gcc_pcie1_axi_s_clk = {
 };
 
 static struct clk_branch gcc_pcie1_pipe_clk = {
-	.halt_reg = 8,
+	.halt_reg = 0x76018,
 	.halt_check = BRANCH_HALT_DELAY,
 	.halt_bit = 31,
 	.clkr = {
-- 
2.43.0

[PATCH 6.7 533/713] clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset

[Sasha Levin]

From: Gabor Juhos <j4g8y7@gmail.com>

[ Upstream commit 7d474b43087aa356d714d39870c90d77fc6f1186 ]

The current register offset used for the GCC_UBI0_AXI_ARES reset
seems wrong. Or at least, the downstream driver uses [1] the same
offset which is used for other the GCC_UBI0_*_ARES resets.

Change the code to use the same offset used in the downstream
driver and also specify the reset bit explicitly to use the
same format as the followup entries.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L3773

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-3-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-ipq5018.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c
index 5e81cfa77293a..e2bd54826a4ce 100644
--- a/drivers/clk/qcom/gcc-ipq5018.c
+++ b/drivers/clk/qcom/gcc-ipq5018.c
@@ -3632,7 +3632,7 @@ static const struct qcom_reset_map gcc_ipq5018_resets[] = {
 	[GCC_SYSTEM_NOC_BCR] = { 0x26000, 0 },
 	[GCC_TCSR_BCR] = { 0x28000, 0 },
 	[GCC_TLMM_BCR] = { 0x34000, 0 },
-	[GCC_UBI0_AXI_ARES] = { 0x680},
+	[GCC_UBI0_AXI_ARES] = { 0x68010, 0 },
 	[GCC_UBI0_AHB_ARES] = { 0x68010, 1 },
 	[GCC_UBI0_NC_AXI_ARES] = { 0x68010, 2 },
 	[GCC_UBI0_DBG_ARES] = { 0x68010, 3 },
-- 
2.43.0

[PATCH 6.7 534/713] drm/msm/dpu: add division of drm_display_mode's hskew parameter

[Sasha Levin]

From: Paloma Arellano <quic_parellan@quicinc.com>

[ Upstream commit 551ee0f210991d25f336bc27262353bfe99d3eed ]

Setting up the timing engine when the physical encoder has a split role
neglects dividing the drm_display_mode's hskew parameter. Let's fix this
since this must also be done in preparation for implementing YUV420 over
DP.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579605/
Link: https://lore.kernel.org/r/20240222194025.25329-3-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 2b20ff720c130..f66e0f125a03c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -258,12 +258,14 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 		mode.htotal >>= 1;
 		mode.hsync_start >>= 1;
 		mode.hsync_end >>= 1;
+		mode.hskew >>= 1;
 
 		DPU_DEBUG_VIDENC(phys_enc,
-			"split_role %d, halve horizontal %d %d %d %d\n",
+			"split_role %d, halve horizontal %d %d %d %d %d\n",
 			phys_enc->split_role,
 			mode.hdisplay, mode.htotal,
-			mode.hsync_start, mode.hsync_end);
+			mode.hsync_start, mode.hsync_end,
+			mode.hskew);
 	}
 
 	drm_mode_to_intf_timing_params(phys_enc, &mode, &timing_params);
-- 
2.43.0

[PATCH 6.7 535/713] modules: wait do_free_init correctly

[Sasha Levin]

From: Changbin Du <changbin.du@huawei.com>

[ Upstream commit 8f8cd6c0a43ed637e620bbe45a8d0e0c2f4d5130 ]

The synchronization here is to ensure the ordering of freeing of a module
init so that it happens before W+X checking.  It is worth noting it is not
that the freeing was not happening, it is just that our sanity checkers
raced against the permission checkers which assume init memory is already
gone.

Commit 1a7b7d922081 ("modules: Use vmalloc special flag") moved calling
do_free_init() into a global workqueue instead of relying on it being
called through call_rcu(..., do_free_init), which used to allowed us call
do_free_init() asynchronously after the end of a subsequent grace period.
The move to a global workqueue broke the gaurantees for code which needed
to be sure the do_free_init() would complete with rcu_barrier().  To fix
this callers which used to rely on rcu_barrier() must now instead use
flush_work(&init_free_wq).

Without this fix, we still could encounter false positive reports in W+X
checking since the rcu_barrier() here can not ensure the ordering now.

Even worse, the rcu_barrier() can introduce significant delay.  Eric
Chanudet reported that the rcu_barrier introduces ~0.1s delay on a
PREEMPT_RT kernel.

  [    0.291444] Freeing unused kernel memory: 5568K
  [    0.402442] Run /sbin/init as init process

With this fix, the above delay can be eliminated.

Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com
Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Xiaoyi Su <suxiaoyi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/moduleloader.h | 8 ++++++++
 init/main.c                  | 5 +++--
 kernel/module/main.c         | 9 +++++++--
 3 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/include/linux/moduleloader.h b/include/linux/moduleloader.h
index 001b2ce83832e..89b1e0ed98114 100644
--- a/include/linux/moduleloader.h
+++ b/include/linux/moduleloader.h
@@ -115,6 +115,14 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *mod);
 
+#ifdef CONFIG_MODULES
+void flush_module_init_free_work(void);
+#else
+static inline void flush_module_init_free_work(void)
+{
+}
+#endif
+
 /* Any cleanup needed when module leaves. */
 void module_arch_cleanup(struct module *mod);
 
diff --git a/init/main.c b/init/main.c
index e24b0780fdff7..9e6ab6d593bd8 100644
--- a/init/main.c
+++ b/init/main.c
@@ -88,6 +88,7 @@
 #include <linux/sched/task_stack.h>
 #include <linux/context_tracking.h>
 #include <linux/random.h>
+#include <linux/moduleloader.h>
 #include <linux/list.h>
 #include <linux/integrity.h>
 #include <linux/proc_ns.h>
@@ -1402,11 +1403,11 @@ static void mark_readonly(void)
 	if (rodata_enabled) {
 		/*
 		 * load_module() results in W+X mappings, which are cleaned
-		 * up with call_rcu().  Let's make sure that queued work is
+		 * up with init_free_wq. Let's make sure that queued work is
 		 * flushed so that we don't hit false positives looking for
 		 * insecure pages which are W+X.
 		 */
-		rcu_barrier();
+		flush_module_init_free_work();
 		mark_rodata_ro();
 		rodata_test();
 	} else
diff --git a/kernel/module/main.c b/kernel/module/main.c
index 98fedfdb8db52..34d9e718c2c7d 100644
--- a/kernel/module/main.c
+++ b/kernel/module/main.c
@@ -2486,6 +2486,11 @@ static void do_free_init(struct work_struct *w)
 	}
 }
 
+void flush_module_init_free_work(void)
+{
+	flush_work(&init_free_wq);
+}
+
 #undef MODULE_PARAM_PREFIX
 #define MODULE_PARAM_PREFIX "module."
 /* Default value for module->async_probe_requested */
@@ -2590,8 +2595,8 @@ static noinline int do_init_module(struct module *mod)
 	 * Note that module_alloc() on most architectures creates W+X page
 	 * mappings which won't be cleaned up until do_free_init() runs.  Any
 	 * code such as mark_rodata_ro() which depends on those mappings to
-	 * be cleaned up needs to sync with the queued work - ie
-	 * rcu_barrier()
+	 * be cleaned up needs to sync with the queued work by invoking
+	 * flush_module_init_free_work().
 	 */
 	if (llist_add(&freeinit->node, &init_free_list))
 		schedule_work(&init_free_wq);
-- 
2.43.0

[PATCH 6.7 536/713] mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults

[Sasha Levin]

From: Maciej Strozek <mstrozek@opensource.cirrus.com>

[ Upstream commit 78334c343bef528b911da83a6b041d15a1a72efb ]

Two regs have wrong values in existing fields, change them to match
the datasheet.

Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301101547.2136948-1-mstrozek@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/cs42l43.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c
index 73c88ee6a866c..1cea3f8f467d4 100644
--- a/drivers/mfd/cs42l43.c
+++ b/drivers/mfd/cs42l43.c
@@ -84,7 +84,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
 	{ CS42L43_DRV_CTRL_5,				0x136C00C0 },
 	{ CS42L43_GPIO_CTRL1,				0x00000707 },
 	{ CS42L43_GPIO_CTRL2,				0x00000000 },
-	{ CS42L43_GPIO_FN_SEL,				0x00000000 },
+	{ CS42L43_GPIO_FN_SEL,				0x00000004 },
 	{ CS42L43_MCLK_SRC_SEL,				0x00000000 },
 	{ CS42L43_SAMPLE_RATE1,				0x00000003 },
 	{ CS42L43_SAMPLE_RATE2,				0x00000003 },
@@ -217,7 +217,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
 	{ CS42L43_CTRL_REG,				0x00000006 },
 	{ CS42L43_FDIV_FRAC,				0x40000000 },
 	{ CS42L43_CAL_RATIO,				0x00000080 },
-	{ CS42L43_SPI_CLK_CONFIG1,			0x00000000 },
+	{ CS42L43_SPI_CLK_CONFIG1,			0x00000001 },
 	{ CS42L43_SPI_CONFIG1,				0x00000000 },
 	{ CS42L43_SPI_CONFIG2,				0x00000000 },
 	{ CS42L43_SPI_CONFIG3,				0x00000001 },
-- 
2.43.0

[PATCH 6.7 537/713] power: supply: mm8013: fix "not charging" detection

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit cd38a0acca734a1117663d6f0da579d3965b6c93 ]

The charge_behaviours property is meant as a control-knob that can be
changed by the user.

Page 23 of [0] which documents the flag CHG_INH as follows:

  CHG_INH : Charge Inhibit      When the current is more than or equal to charge
                                threshold current,
                                charge inhibit temperature (upper/lower limit) ：1
                                charge permission temperature or the current is
                                less than charge threshold current ：0

So this is pure read-only information which is better represented as
POWER_SUPPLY_STATUS_NOT_CHARGING.

[0] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdf

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-1-8ebb0a7c2409@weissschuh.net
Fixes: e39257cde7e8 ("power: supply: mm8013: Add more properties")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/mm8013.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/power/supply/mm8013.c b/drivers/power/supply/mm8013.c
index caa272b035649..20c1651ca38e0 100644
--- a/drivers/power/supply/mm8013.c
+++ b/drivers/power/supply/mm8013.c
@@ -71,7 +71,6 @@ static int mm8013_checkdevice(struct mm8013_chip *chip)
 
 static enum power_supply_property mm8013_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
@@ -103,16 +102,6 @@ static int mm8013_get_property(struct power_supply *psy,
 
 		val->intval = regval;
 		break;
-	case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR:
-		ret = regmap_read(chip->regmap, REG_FLAGS, &regval);
-		if (ret < 0)
-			return ret;
-
-		if (regval & MM8013_FLAG_CHG_INH)
-			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE;
-		else
-			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO;
-		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		ret = regmap_read(chip->regmap, REG_FULL_CHARGE_CAPACITY, &regval);
 		if (ret < 0)
@@ -187,6 +176,8 @@ static int mm8013_get_property(struct power_supply *psy,
 
 		if (regval & MM8013_FLAG_DSG)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (regval & MM8013_FLAG_CHG_INH)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else if (regval & MM8013_FLAG_CHG)
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (regval & MM8013_FLAG_FC)
-- 
2.43.0

[PATCH 6.7 538/713] powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]

Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:

  arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
  arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/linkstation.c | 3 ---
 arch/powerpc/platforms/embedded6xx/mpc10x.h      | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 9c10aac40c7b1..e265f026eee2a 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -99,9 +99,6 @@ static void __init linkstation_init_IRQ(void)
 	mpic_init(mpic);
 }
 
-extern void avr_uart_configure(void);
-extern void avr_uart_send(const char);
-
 static void __noreturn linkstation_restart(char *cmd)
 {
 	local_irq_disable();
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index 5ad12023e5628..ebc258fa4858d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose);
 /* For MPC107 boards that use the built-in openpic */
 void mpc10x_set_openpic(void);
 
+void avr_uart_configure(void);
+void avr_uart_send(const char c);
+
 #endif	/* __PPC_KERNEL_MPC10X_H */
-- 
2.43.0

[PATCH 6.7 539/713] leds: aw2013: Unlock mutex before destroying it

[Sasha Levin]

From: George Stark <gnstark@salutedevices.com>

[ Upstream commit 6969d0a2ba1adc9ba6a49b9805f24080896c255c ]

In the probe() callback in case of error mutex is destroyed being locked
which is not allowed so unlock the mutex before destroying.

Fixes: 59ea3c9faf32 ("leds: add aw2013 driver")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231214173614.2820929-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-aw2013.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 91f44b23cb113..17235a5e576ae 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -405,6 +405,7 @@ static int aw2013_probe(struct i2c_client *client)
 			       chip->regulators);
 
 error:
+	mutex_unlock(&chip->mutex);
 	mutex_destroy(&chip->mutex);
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 540/713] leds: sgm3140: Add missing timer cleanup and flash gpio control

[Sasha Levin]

From: Ondrej Jirman <megi@xff.cz>

[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ]

Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).

Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/flash/leds-sgm3140.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/leds/flash/leds-sgm3140.c b/drivers/leds/flash/leds-sgm3140.c
index eb648ff54b4e5..db0ac6641954e 100644
--- a/drivers/leds/flash/leds-sgm3140.c
+++ b/drivers/leds/flash/leds-sgm3140.c
@@ -114,8 +114,11 @@ static int sgm3140_brightness_set(struct led_classdev *led_cdev,
 				"failed to enable regulator: %d\n", ret);
 			return ret;
 		}
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 1);
 	} else {
+		del_timer_sync(&priv->powerdown_timer);
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 0);
 		ret = regulator_disable(priv->vin_regulator);
 		if (ret) {
-- 
2.43.0

[PATCH 6.7 541/713] backlight: ktz8866: Correct the check for of_property_read_u32

[Sasha Levin]

From: Jianhua Lu <lujianhua000@gmail.com>

[ Upstream commit f1ac3c9825f99c93a9833beee6b78aa386e55b0b ]

of_property_read_u32 returns 0 when success, so reverse the
return value to get the true value.

Fixes: f8449c8f7355 ("backlight: ktz8866: Add support for Kinetic KTZ8866 backlight")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240129122829.16248-1-lujianhua000@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/ktz8866.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
index 9c980f2571ee3..014877b5a9848 100644
--- a/drivers/video/backlight/ktz8866.c
+++ b/drivers/video/backlight/ktz8866.c
@@ -97,20 +97,20 @@ static void ktz8866_init(struct ktz8866 *ktz)
 {
 	unsigned int val = 0;
 
-	if (of_property_read_u32(ktz->client->dev.of_node, "current-num-sinks", &val))
+	if (!of_property_read_u32(ktz->client->dev.of_node, "current-num-sinks", &val))
 		ktz8866_write(ktz, BL_EN, BIT(val) - 1);
 	else
 		/* Enable all 6 current sinks if the number of current sinks isn't specified. */
 		ktz8866_write(ktz, BL_EN, BIT(6) - 1);
 
-	if (of_property_read_u32(ktz->client->dev.of_node, "kinetic,current-ramp-delay-ms", &val)) {
+	if (!of_property_read_u32(ktz->client->dev.of_node, "kinetic,current-ramp-delay-ms", &val)) {
 		if (val <= 128)
 			ktz8866_write(ktz, BL_CFG2, BIT(7) | (ilog2(val) << 3) | PWM_HYST);
 		else
 			ktz8866_write(ktz, BL_CFG2, BIT(7) | ((5 + val / 64) << 3) | PWM_HYST);
 	}
 
-	if (of_property_read_u32(ktz->client->dev.of_node, "kinetic,led-enable-ramp-delay-ms", &val)) {
+	if (!of_property_read_u32(ktz->client->dev.of_node, "kinetic,led-enable-ramp-delay-ms", &val)) {
 		if (val == 0)
 			ktz8866_write(ktz, BL_DIMMING, 0);
 		else {
-- 
2.43.0

[PATCH 6.7 542/713] backlight: lm3630a: Initialize backlight_properties on init

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit ad9aeb0e3aa90ebdad5fabf9c21783740eb95907 ]

The backlight_properties struct should be initialized to zero before
using, otherwise there will be some random values in the struct.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-1-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 8fcb62be597b8..2e2240b278482 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -343,6 +343,7 @@ static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
 	struct backlight_properties props;
 	const char *label;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
 		props.brightness = pdata->leda_init_brt;
-- 
2.43.0

[PATCH 6.7 543/713] backlight: lm3630a: Don't set bl->props.brightness in get_brightness

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit 4bf7ddd2d2f0f8826f25f74c7eba4e2c323a1446 ]

There's no need to set bl->props.brightness, the get_brightness function
is just supposed to return the current brightness and not touch the
struct.

With that done we can also remove the 'goto out' and just return the
value.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-2-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 2e2240b278482..7115d7bb2a141 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -233,7 +233,7 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -244,11 +244,8 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_A);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
@@ -310,7 +307,7 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -321,11 +318,8 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_B);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
-- 
2.43.0

[PATCH 6.7 544/713] backlight: da9052: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 0285e9efaee8276305db5c52a59baf84e9731556 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 6ede3d832aaa ("backlight: add driver for DA9052/53 PMIC v1")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-2-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/da9052_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c
index 1cdc8543310b4..b8ff7046510eb 100644
--- a/drivers/video/backlight/da9052_bl.c
+++ b/drivers/video/backlight/da9052_bl.c
@@ -117,6 +117,7 @@ static int da9052_backlight_probe(struct platform_device *pdev)
 	wleds->led_reg = platform_get_device_id(pdev)->driver_data;
 	wleds->state = DA9052_WLEDS_OFF;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = DA9052_MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 6.7 545/713] backlight: lm3639: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit abb5a5d951fbea3feb5c4ba179b89bb96a1d3462 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 0f59858d5119 ("backlight: add new lm3639 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-3-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3639_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index 5246c171497d6..564f62acd7211 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -338,6 +338,7 @@ static int lm3639_probe(struct i2c_client *client)
 	}
 
 	/* backlight */
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.brightness = pdata->init_brt_led;
 	props.max_brightness = pdata->max_brt_led;
-- 
2.43.0

[PATCH 6.7 546/713] backlight: lp8788: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 392346827fbe8a7fd573dfb145170d7949f639a6 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: c5a51053cf3b ("backlight: add new lp8788 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-4-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lp8788_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c
index d1a14b0db265b..31f97230ee506 100644
--- a/drivers/video/backlight/lp8788_bl.c
+++ b/drivers/video/backlight/lp8788_bl.c
@@ -191,6 +191,7 @@ static int lp8788_backlight_register(struct lp8788_bl *bl)
 	int init_brt;
 	char *name;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 6.7 547/713] arch/powerpc: Remove <linux/fb.h> from backlight code

[Sasha Levin]

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 838f865802b9f26135ea7df4e30f89ac2f50c23e ]

Replace <linux/fb.h> with a forward declaration in <asm/backlight.h> to
resolve an unnecessary dependency. Remove pmac_backlight_curve_lookup()
and struct fb_info from source and header files. The function and the
framebuffer struct are unused. No functional changes.

v3:
	* Add Fixes tag (Christophe)
	* fix typos in commit message (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d565dd3b0824 ("[PATCH] powerpc: More via-pmu backlight fixes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # (powerpc)
Link: https://patchwork.freedesktop.org/patch/msgid/20240306122935.10626-4-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/backlight.h        |  5 ++--
 arch/powerpc/platforms/powermac/backlight.c | 26 ---------------------
 2 files changed, 2 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
index 1b5eab62ed047..061a910d74929 100644
--- a/arch/powerpc/include/asm/backlight.h
+++ b/arch/powerpc/include/asm/backlight.h
@@ -10,15 +10,14 @@
 #define __ASM_POWERPC_BACKLIGHT_H
 #ifdef __KERNEL__
 
-#include <linux/fb.h>
 #include <linux/mutex.h>
 
+struct backlight_device;
+
 /* For locking instructions, see the implementation file */
 extern struct backlight_device *pmac_backlight;
 extern struct mutex pmac_backlight_mutex;
 
-extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
-
 extern int pmac_has_backlight_type(const char *type);
 
 extern void pmac_backlight_key(int direction);
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index aeb79a8b3e109..12bc01353bd3c 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
@@ -72,31 +71,6 @@ int pmac_has_backlight_type(const char *type)
 	return 0;
 }
 
-int pmac_backlight_curve_lookup(struct fb_info *info, int value)
-{
-	int level = (FB_BACKLIGHT_LEVELS - 1);
-
-	if (info && info->bl_dev) {
-		int i, max = 0;
-
-		/* Look for biggest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++)
-			max = max((int)info->bl_curve[i], max);
-
-		/* Look for nearest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) {
-			int diff = abs(info->bl_curve[i] - value);
-			if (diff < max) {
-				max = diff;
-				level = i;
-			}
-		}
-
-	}
-
-	return level;
-}
-
 static void pmac_backlight_key_worker(struct work_struct *work)
 {
 	if (atomic_read(&kernel_backlight_disabled))
-- 
2.43.0

[PATCH 6.7 548/713] sparc32: Fix section mismatch in leon_pci_grpci

[Sasha Levin]

From: Sam Ravnborg <sam@ravnborg.org>

[ Upstream commit 24338a6ae13cb743ced77da1b3a12c83f08a0c96 ]

Passing a datastructre marked _initconst to platform_driver_register()
is wrong. Drop the __initconst notation.

This fixes the following warnings:

WARNING: modpost: vmlinux: section mismatch in reference: grpci1_of_driver+0x30 (section: .data) -> grpci1_of_match (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: grpci2_of_driver+0x30 (section: .data) -> grpci2_of_match (section: .init.rodata)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Fixes: 4154bb821f0b ("sparc: leon: grpci1: constify of_device_id")
Fixes: 03949b1cb9f1 ("sparc: leon: grpci2: constify of_device_id")
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-7-1f186603c5c4@ravnborg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/leon_pci_grpci1.c | 2 +-
 arch/sparc/kernel/leon_pci_grpci2.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c
index 8700a0e3b0df7..b2b639bee0684 100644
--- a/arch/sparc/kernel/leon_pci_grpci1.c
+++ b/arch/sparc/kernel/leon_pci_grpci1.c
@@ -697,7 +697,7 @@ static int grpci1_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci1_of_match[] __initconst = {
+static const struct of_device_id grpci1_of_match[] = {
 	{
 	 .name = "GAISLER_PCIFBRG",
 	 },
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
index 60b6bdf7761fb..ac2acd62a24ec 100644
--- a/arch/sparc/kernel/leon_pci_grpci2.c
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -889,7 +889,7 @@ static int grpci2_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci2_of_match[] __initconst = {
+static const struct of_device_id grpci2_of_match[] = {
 	{
 	 .name = "GAISLER_GRPCI2",
 	 },
-- 
2.43.0

[PATCH 6.7 549/713] clk: Fix clk_core_get NULL dereference

[Sasha Levin]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit e97fe4901e0f59a0bfd524578fe3768f8ca42428 ]

It is possible for clk_core_get to dereference a NULL in the following
sequence:

clk_core_get()
    of_clk_get_hw_from_clkspec()
        __of_clk_get_hw_from_provider()
            __clk_get_hw()

__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.

Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.

Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.

Update the function to check for hw before dereferencing it and return NULL
if hw is NULL.

Fixes: dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240302-linux-next-24-03-01-simple-clock-fixes-v1-1-25f348a5982b@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2253c154a8248..20c4b28fed061 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -418,6 +418,9 @@ static struct clk_core *clk_core_get(struct clk_core *core, u8 p_index)
 	if (IS_ERR(hw))
 		return ERR_CAST(hw);
 
+	if (!hw)
+		return NULL;
+
 	return hw->core;
 }
 
-- 
2.43.0

[PATCH 6.7 550/713] clk: zynq: Prevent null pointer dereference caused by kmalloc failure

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 7938e9ce39d6779d2f85d822cc930f73420e54a6 ]

The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.

This patch uses a stack variable to replace the kmalloc().

Fixes: 0ee52b157b8e ("clk: zynq: Add clock controller driver")
Suggested-by: Michal Simek <michal.simek@amd.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240301084437.16084-1-duoming@zju.edu.cn
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/zynq/clkc.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 7bdeaff2bfd68..c28d3dacf0fb2 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -42,6 +42,7 @@ static void __iomem *zynq_clkc_base;
 #define SLCR_SWDT_CLK_SEL		(zynq_clkc_base + 0x204)
 
 #define NUM_MIO_PINS	54
+#define CLK_NAME_LEN	16
 
 #define DBG_CLK_CTRL_CLKACT_TRC		BIT(0)
 #define DBG_CLK_CTRL_CPU_1XCLKACT	BIT(1)
@@ -215,7 +216,7 @@ static void __init zynq_clk_setup(struct device_node *np)
 	int i;
 	u32 tmp;
 	int ret;
-	char *clk_name;
+	char clk_name[CLK_NAME_LEN];
 	unsigned int fclk_enable = 0;
 	const char *clk_output_name[clk_max];
 	const char *cpu_parents[4];
@@ -426,12 +427,10 @@ static void __init zynq_clk_setup(struct device_node *np)
 			"gem1_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
 
-	tmp = strlen("mio_clk_00x");
-	clk_name = kmalloc(tmp, GFP_KERNEL);
 	for (i = 0; i < NUM_MIO_PINS; i++) {
 		int idx;
 
-		snprintf(clk_name, tmp, "mio_clk_%2.2d", i);
+		snprintf(clk_name, CLK_NAME_LEN, "mio_clk_%2.2d", i);
 		idx = of_property_match_string(np, "clock-names", clk_name);
 		if (idx >= 0)
 			can_mio_mux_parents[i] = of_clk_get_parent_name(np,
@@ -439,7 +438,6 @@ static void __init zynq_clk_setup(struct device_node *np)
 		else
 			can_mio_mux_parents[i] = dummy_nm;
 	}
-	kfree(clk_name);
 	clk_register_mux(NULL, "can_mux", periph_parents, 4,
 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_CLK_CTRL, 4, 2, 0,
 			&canclk_lock);
-- 
2.43.0

[PATCH 6.7 551/713] PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling

[Sasha Levin]

From: Jonathan Bell <jonathan@raspberrypi.com>

[ Upstream commit 039741a8d7c9a01c1bc84a5ac5aa770a5e138a30 ]

The MDIO_WT_DONE() macro tests bit 31, which is always 0 (== done) as
readw_poll_timeout_atomic() does a 16-bit read. Replace with the readl
variant.

[kwilczynski: commit log]
Fixes: ca5dcc76314d ("PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()")
Link: https://lore.kernel.org/linux-pci/20240217133722.14391-1-wahrenst@gmx.net
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-brcmstb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index f9dd6622fe109..e47a77f943b1e 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -330,7 +330,7 @@ static int brcm_pcie_mdio_write(void __iomem *base, u8 port,
 	readl(base + PCIE_RC_DL_MDIO_ADDR);
 	writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
 
-	err = readw_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_WR_DATA, data,
+	err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_WR_DATA, data,
 					MDIO_WT_DONE(data), 10, 100);
 	return err;
 }
-- 
2.43.0

[PATCH 6.7 552/713] smb: do not test the return value of folio_start_writeback()

[Sasha Levin]

From: "Matthew Wilcox (Oracle)" <willy@infradead.org>

[ Upstream commit a9540e35624d1475f47dbf6353eed8b99936d36e ]

In preparation for removing the return value entirely, stop testing it
in smb.

Link: https://lkml.kernel.org/r/20231108204605.745109-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f3dc1bdb6b0b ("cifs: Fix writeback data corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/file.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c
index 4cbb5487bd8d0..043bee4020a91 100644
--- a/fs/smb/client/file.c
+++ b/fs/smb/client/file.c
@@ -2709,8 +2709,7 @@ static void cifs_extend_writeback(struct address_space *mapping,
 			 */
 			if (!folio_clear_dirty_for_io(folio))
 				WARN_ON(1);
-			if (folio_start_writeback(folio))
-				WARN_ON(1);
+			folio_start_writeback(folio);
 
 			*_count -= folio_nr_pages(folio);
 			folio_unlock(folio);
@@ -2745,8 +2744,7 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 	int rc;
 
 	/* The folio should be locked, dirty and not undergoing writeback. */
-	if (folio_start_writeback(folio))
-		WARN_ON(1);
+	folio_start_writeback(folio);
 
 	count -= folio_nr_pages(folio);
 	len = folio_size(folio);
-- 
2.43.0

[PATCH 6.7 553/713] cifs: Don't use certain unnecessary folio_*() functions

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit c40497d82387188f14d9adc4caa58ee1cb1999e1 ]

Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.

Change this automagically with:

perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/smb/client/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/smb/client/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/smb/client/*.c

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <lsahlber@redhat.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Stable-dep-of: f3dc1bdb6b0b ("cifs: Fix writeback data corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/file.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c
index 043bee4020a91..7320272ef0074 100644
--- a/fs/smb/client/file.c
+++ b/fs/smb/client/file.c
@@ -87,7 +87,7 @@ void cifs_pages_written_back(struct inode *inode, loff_t start, unsigned int len
 			continue;
 		if (!folio_test_writeback(folio)) {
 			WARN_ONCE(1, "bad %x @%llx page %lx %lx\n",
-				  len, start, folio_index(folio), end);
+				  len, start, folio->index, end);
 			continue;
 		}
 
@@ -120,7 +120,7 @@ void cifs_pages_write_failed(struct inode *inode, loff_t start, unsigned int len
 			continue;
 		if (!folio_test_writeback(folio)) {
 			WARN_ONCE(1, "bad %x @%llx page %lx %lx\n",
-				  len, start, folio_index(folio), end);
+				  len, start, folio->index, end);
 			continue;
 		}
 
@@ -151,7 +151,7 @@ void cifs_pages_write_redirty(struct inode *inode, loff_t start, unsigned int le
 	xas_for_each(&xas, folio, end) {
 		if (!folio_test_writeback(folio)) {
 			WARN_ONCE(1, "bad %x @%llx page %lx %lx\n",
-				  len, start, folio_index(folio), end);
+				  len, start, folio->index, end);
 			continue;
 		}
 
@@ -2652,7 +2652,7 @@ static void cifs_extend_writeback(struct address_space *mapping,
 				continue;
 			if (xa_is_value(folio))
 				break;
-			if (folio_index(folio) != index)
+			if (folio->index != index)
 				break;
 			if (!folio_try_get_rcu(folio)) {
 				xas_reset(&xas);
@@ -2900,7 +2900,7 @@ static int cifs_writepages_region(struct address_space *mapping,
 					goto skip_write;
 			}
 
-			if (folio_mapping(folio) != mapping ||
+			if (folio->mapping != mapping ||
 			    !folio_test_dirty(folio)) {
 				start += folio_size(folio);
 				folio_unlock(folio);
-- 
2.43.0

[PATCH 6.7 554/713] cifs: Fix writeback data corruption

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit f3dc1bdb6b0b0693562c7c54a6c28bafa608ba3c ]

cifs writeback doesn't correctly handle the case where
cifs_extend_writeback() hits a point where it is considering an additional
folio, but this would overrun the wsize - at which point it drops out of
the xarray scanning loop and calls xas_pause().  The problem is that
xas_pause() advances the loop counter - thereby skipping that page.

What needs to happen is for xas_reset() to be called any time we decide we
don't want to process the page we're looking at, but rather send the
request we are building and start a new one.

Fix this by copying and adapting the netfslib writepages code as a
temporary measure, with cifs writeback intending to be offloaded to
netfslib in the near future.

This also fixes the issue with the use of filemap_get_folios_tag() causing
retry of a bunch of pages which the extender already dealt with.

This can be tested by creating, say, a 64K file somewhere not on cifs
(otherwise copy-offload may get underfoot), mounting a cifs share with a
wsize of 64000, copying the file to it and then comparing the original file
and the copy:

        dd if=/dev/urandom of=/tmp/64K bs=64k count=1
        mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000
        cp /tmp/64K /mnt/64K
        cmp /tmp/64K /mnt/64K

Without the fix, the cmp fails at position 64000 (or shortly thereafter).

Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/file.c | 283 ++++++++++++++++++++++++-------------------
 1 file changed, 157 insertions(+), 126 deletions(-)

diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c
index 7320272ef0074..c156460eb5587 100644
--- a/fs/smb/client/file.c
+++ b/fs/smb/client/file.c
@@ -2622,20 +2622,20 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to)
  * dirty pages if possible, but don't sleep while doing so.
  */
 static void cifs_extend_writeback(struct address_space *mapping,
+				  struct xa_state *xas,
 				  long *_count,
 				  loff_t start,
 				  int max_pages,
-				  size_t max_len,
-				  unsigned int *_len)
+				  loff_t max_len,
+				  size_t *_len)
 {
 	struct folio_batch batch;
 	struct folio *folio;
-	unsigned int psize, nr_pages;
-	size_t len = *_len;
-	pgoff_t index = (start + len) / PAGE_SIZE;
+	unsigned int nr_pages;
+	pgoff_t index = (start + *_len) / PAGE_SIZE;
+	size_t len;
 	bool stop = true;
 	unsigned int i;
-	XA_STATE(xas, &mapping->i_pages, index);
 
 	folio_batch_init(&batch);
 
@@ -2646,54 +2646,64 @@ static void cifs_extend_writeback(struct address_space *mapping,
 		 */
 		rcu_read_lock();
 
-		xas_for_each(&xas, folio, ULONG_MAX) {
+		xas_for_each(xas, folio, ULONG_MAX) {
 			stop = true;
-			if (xas_retry(&xas, folio))
+			if (xas_retry(xas, folio))
 				continue;
 			if (xa_is_value(folio))
 				break;
-			if (folio->index != index)
+			if (folio->index != index) {
+				xas_reset(xas);
 				break;
+			}
+
 			if (!folio_try_get_rcu(folio)) {
-				xas_reset(&xas);
+				xas_reset(xas);
 				continue;
 			}
 			nr_pages = folio_nr_pages(folio);
-			if (nr_pages > max_pages)
+			if (nr_pages > max_pages) {
+				xas_reset(xas);
 				break;
+			}
 
 			/* Has the page moved or been split? */
-			if (unlikely(folio != xas_reload(&xas))) {
+			if (unlikely(folio != xas_reload(xas))) {
 				folio_put(folio);
+				xas_reset(xas);
 				break;
 			}
 
 			if (!folio_trylock(folio)) {
 				folio_put(folio);
+				xas_reset(xas);
 				break;
 			}
-			if (!folio_test_dirty(folio) || folio_test_writeback(folio)) {
+			if (!folio_test_dirty(folio) ||
+			    folio_test_writeback(folio)) {
 				folio_unlock(folio);
 				folio_put(folio);
+				xas_reset(xas);
 				break;
 			}
 
 			max_pages -= nr_pages;
-			psize = folio_size(folio);
-			len += psize;
+			len = folio_size(folio);
 			stop = false;
-			if (max_pages <= 0 || len >= max_len || *_count <= 0)
-				stop = true;
 
 			index += nr_pages;
+			*_count -= nr_pages;
+			*_len += len;
+			if (max_pages <= 0 || *_len >= max_len || *_count <= 0)
+				stop = true;
+
 			if (!folio_batch_add(&batch, folio))
 				break;
 			if (stop)
 				break;
 		}
 
-		if (!stop)
-			xas_pause(&xas);
+		xas_pause(xas);
 		rcu_read_unlock();
 
 		/* Now, if we obtained any pages, we can shift them to being
@@ -2710,16 +2720,12 @@ static void cifs_extend_writeback(struct address_space *mapping,
 			if (!folio_clear_dirty_for_io(folio))
 				WARN_ON(1);
 			folio_start_writeback(folio);
-
-			*_count -= folio_nr_pages(folio);
 			folio_unlock(folio);
 		}
 
 		folio_batch_release(&batch);
 		cond_resched();
 	} while (!stop);
-
-	*_len = len;
 }
 
 /*
@@ -2727,8 +2733,10 @@ static void cifs_extend_writeback(struct address_space *mapping,
  */
 static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 						 struct writeback_control *wbc,
+						 struct xa_state *xas,
 						 struct folio *folio,
-						 loff_t start, loff_t end)
+						 unsigned long long start,
+						 unsigned long long end)
 {
 	struct inode *inode = mapping->host;
 	struct TCP_Server_Info *server;
@@ -2737,17 +2745,18 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 	struct cifs_credits credits_on_stack;
 	struct cifs_credits *credits = &credits_on_stack;
 	struct cifsFileInfo *cfile = NULL;
-	unsigned int xid, wsize, len;
-	loff_t i_size = i_size_read(inode);
-	size_t max_len;
+	unsigned long long i_size = i_size_read(inode), max_len;
+	unsigned int xid, wsize;
+	size_t len = folio_size(folio);
 	long count = wbc->nr_to_write;
 	int rc;
 
 	/* The folio should be locked, dirty and not undergoing writeback. */
+	if (!folio_clear_dirty_for_io(folio))
+		WARN_ON_ONCE(1);
 	folio_start_writeback(folio);
 
 	count -= folio_nr_pages(folio);
-	len = folio_size(folio);
 
 	xid = get_xid();
 	server = cifs_pick_channel(cifs_sb_master_tcon(cifs_sb)->ses);
@@ -2777,9 +2786,10 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 	wdata->server = server;
 	cfile = NULL;
 
-	/* Find all consecutive lockable dirty pages, stopping when we find a
-	 * page that is not immediately lockable, is not dirty or is missing,
-	 * or we reach the end of the range.
+	/* Find all consecutive lockable dirty pages that have contiguous
+	 * written regions, stopping when we find a page that is not
+	 * immediately lockable, is not dirty or is missing, or we reach the
+	 * end of the range.
 	 */
 	if (start < i_size) {
 		/* Trim the write to the EOF; the extra data is ignored.  Also
@@ -2799,19 +2809,18 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 			max_pages -= folio_nr_pages(folio);
 
 			if (max_pages > 0)
-				cifs_extend_writeback(mapping, &count, start,
+				cifs_extend_writeback(mapping, xas, &count, start,
 						      max_pages, max_len, &len);
 		}
-		len = min_t(loff_t, len, max_len);
 	}
-
-	wdata->bytes = len;
+	len = min_t(unsigned long long, len, i_size - start);
 
 	/* We now have a contiguous set of dirty pages, each with writeback
 	 * set; the first page is still locked at this point, but all the rest
 	 * have been unlocked.
 	 */
 	folio_unlock(folio);
+	wdata->bytes = len;
 
 	if (start < i_size) {
 		iov_iter_xarray(&wdata->iter, ITER_SOURCE, &mapping->i_pages,
@@ -2862,102 +2871,118 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping,
 /*
  * write a region of pages back to the server
  */
-static int cifs_writepages_region(struct address_space *mapping,
-				  struct writeback_control *wbc,
-				  loff_t start, loff_t end, loff_t *_next)
+static ssize_t cifs_writepages_begin(struct address_space *mapping,
+				     struct writeback_control *wbc,
+				     struct xa_state *xas,
+				     unsigned long long *_start,
+				     unsigned long long end)
 {
-	struct folio_batch fbatch;
+	struct folio *folio;
+	unsigned long long start = *_start;
+	ssize_t ret;
 	int skips = 0;
 
-	folio_batch_init(&fbatch);
-	do {
-		int nr;
-		pgoff_t index = start / PAGE_SIZE;
+search_again:
+	/* Find the first dirty page. */
+	rcu_read_lock();
 
-		nr = filemap_get_folios_tag(mapping, &index, end / PAGE_SIZE,
-					    PAGECACHE_TAG_DIRTY, &fbatch);
-		if (!nr)
+	for (;;) {
+		folio = xas_find_marked(xas, end / PAGE_SIZE, PAGECACHE_TAG_DIRTY);
+		if (xas_retry(xas, folio) || xa_is_value(folio))
+			continue;
+		if (!folio)
 			break;
 
-		for (int i = 0; i < nr; i++) {
-			ssize_t ret;
-			struct folio *folio = fbatch.folios[i];
+		if (!folio_try_get_rcu(folio)) {
+			xas_reset(xas);
+			continue;
+		}
 
-redo_folio:
-			start = folio_pos(folio); /* May regress with THPs */
+		if (unlikely(folio != xas_reload(xas))) {
+			folio_put(folio);
+			xas_reset(xas);
+			continue;
+		}
 
-			/* At this point we hold neither the i_pages lock nor the
-			 * page lock: the page may be truncated or invalidated
-			 * (changing page->mapping to NULL), or even swizzled
-			 * back from swapper_space to tmpfs file mapping
-			 */
-			if (wbc->sync_mode != WB_SYNC_NONE) {
-				ret = folio_lock_killable(folio);
-				if (ret < 0)
-					goto write_error;
-			} else {
-				if (!folio_trylock(folio))
-					goto skip_write;
-			}
+		xas_pause(xas);
+		break;
+	}
+	rcu_read_unlock();
+	if (!folio)
+		return 0;
 
-			if (folio->mapping != mapping ||
-			    !folio_test_dirty(folio)) {
-				start += folio_size(folio);
-				folio_unlock(folio);
-				continue;
-			}
+	start = folio_pos(folio); /* May regress with THPs */
 
-			if (folio_test_writeback(folio) ||
-			    folio_test_fscache(folio)) {
-				folio_unlock(folio);
-				if (wbc->sync_mode == WB_SYNC_NONE)
-					goto skip_write;
+	/* At this point we hold neither the i_pages lock nor the page lock:
+	 * the page may be truncated or invalidated (changing page->mapping to
+	 * NULL), or even swizzled back from swapper_space to tmpfs file
+	 * mapping
+	 */
+lock_again:
+	if (wbc->sync_mode != WB_SYNC_NONE) {
+		ret = folio_lock_killable(folio);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (!folio_trylock(folio))
+			goto search_again;
+	}
 
-				folio_wait_writeback(folio);
+	if (folio->mapping != mapping ||
+	    !folio_test_dirty(folio)) {
+		start += folio_size(folio);
+		folio_unlock(folio);
+		goto search_again;
+	}
+
+	if (folio_test_writeback(folio) ||
+	    folio_test_fscache(folio)) {
+		folio_unlock(folio);
+		if (wbc->sync_mode != WB_SYNC_NONE) {
+			folio_wait_writeback(folio);
 #ifdef CONFIG_CIFS_FSCACHE
-				folio_wait_fscache(folio);
+			folio_wait_fscache(folio);
 #endif
-				goto redo_folio;
-			}
-
-			if (!folio_clear_dirty_for_io(folio))
-				/* We hold the page lock - it should've been dirty. */
-				WARN_ON(1);
-
-			ret = cifs_write_back_from_locked_folio(mapping, wbc, folio, start, end);
-			if (ret < 0)
-				goto write_error;
-
-			start += ret;
-			continue;
-
-write_error:
-			folio_batch_release(&fbatch);
-			*_next = start;
-			return ret;
+			goto lock_again;
+		}
 
-skip_write:
-			/*
-			 * Too many skipped writes, or need to reschedule?
-			 * Treat it as a write error without an error code.
-			 */
+		start += folio_size(folio);
+		if (wbc->sync_mode == WB_SYNC_NONE) {
 			if (skips >= 5 || need_resched()) {
 				ret = 0;
-				goto write_error;
+				goto out;
 			}
-
-			/* Otherwise, just skip that folio and go on to the next */
 			skips++;
-			start += folio_size(folio);
-			continue;
 		}
+		goto search_again;
+	}
 
-		folio_batch_release(&fbatch);		
-		cond_resched();
-	} while (wbc->nr_to_write > 0);
+	ret = cifs_write_back_from_locked_folio(mapping, wbc, xas, folio, start, end);
+out:
+	if (ret > 0)
+		*_start = start + ret;
+	return ret;
+}
 
-	*_next = start;
-	return 0;
+/*
+ * Write a region of pages back to the server
+ */
+static int cifs_writepages_region(struct address_space *mapping,
+				  struct writeback_control *wbc,
+				  unsigned long long *_start,
+				  unsigned long long end)
+{
+	ssize_t ret;
+
+	XA_STATE(xas, &mapping->i_pages, *_start / PAGE_SIZE);
+
+	do {
+		ret = cifs_writepages_begin(mapping, wbc, &xas, _start, end);
+		if (ret > 0 && wbc->nr_to_write > 0)
+			cond_resched();
+	} while (ret > 0 && wbc->nr_to_write > 0);
+
+	return ret > 0 ? 0 : ret;
 }
 
 /*
@@ -2966,7 +2991,7 @@ static int cifs_writepages_region(struct address_space *mapping,
 static int cifs_writepages(struct address_space *mapping,
 			   struct writeback_control *wbc)
 {
-	loff_t start, next;
+	loff_t start, end;
 	int ret;
 
 	/* We have to be careful as we can end up racing with setattr()
@@ -2974,28 +2999,34 @@ static int cifs_writepages(struct address_space *mapping,
 	 * to prevent it.
 	 */
 
-	if (wbc->range_cyclic) {
+	if (wbc->range_cyclic && mapping->writeback_index) {
 		start = mapping->writeback_index * PAGE_SIZE;
-		ret = cifs_writepages_region(mapping, wbc, start, LLONG_MAX, &next);
-		if (ret == 0) {
-			mapping->writeback_index = next / PAGE_SIZE;
-			if (start > 0 && wbc->nr_to_write > 0) {
-				ret = cifs_writepages_region(mapping, wbc, 0,
-							     start, &next);
-				if (ret == 0)
-					mapping->writeback_index =
-						next / PAGE_SIZE;
-			}
+		ret = cifs_writepages_region(mapping, wbc, &start, LLONG_MAX);
+		if (ret < 0)
+			goto out;
+
+		if (wbc->nr_to_write <= 0) {
+			mapping->writeback_index = start / PAGE_SIZE;
+			goto out;
 		}
+
+		start = 0;
+		end = mapping->writeback_index * PAGE_SIZE;
+		mapping->writeback_index = 0;
+		ret = cifs_writepages_region(mapping, wbc, &start, end);
+		if (ret == 0)
+			mapping->writeback_index = start / PAGE_SIZE;
 	} else if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) {
-		ret = cifs_writepages_region(mapping, wbc, 0, LLONG_MAX, &next);
+		start = 0;
+		ret = cifs_writepages_region(mapping, wbc, &start, LLONG_MAX);
 		if (wbc->nr_to_write > 0 && ret == 0)
-			mapping->writeback_index = next / PAGE_SIZE;
+			mapping->writeback_index = start / PAGE_SIZE;
 	} else {
-		ret = cifs_writepages_region(mapping, wbc,
-					     wbc->range_start, wbc->range_end, &next);
+		start = wbc->range_start;
+		ret = cifs_writepages_region(mapping, wbc, &start, wbc->range_end);
 	}
 
+out:
 	return ret;
 }
 
-- 
2.43.0

[PATCH 6.7 555/713] ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops

[Sasha Levin]

From: Athaariq Ardhiansyah <foss@athaariq.my.id>

[ Upstream commit c062166995c9e57d5cd508b332898f79da319802 ]

Realtek codec on HP Envy laptop series are heavily modified by vendor.
Therefore, need intervention to make it work properly. The patch fixes:

- B&O soundbar speakers (between lid and keyboard) activation
- Enable LED on mute button
- Add missing process coefficient which affects the output amplifier
- Volume control synchronization between B&O soundbar and side speakers
- Unmute headset output on several HP Envy models
- Auto-enable headset mic when plugged

This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285

The only unsolved problem is output amplifier of all built-in speakers
is too weak, which causes volume of built-in speakers cannot be loud
as vendor's proprietary driver due to missing _DSD parameter in the
firmware. The solution is currently on research. Expected to has another
patch in the future.

Potential fix to related issues, need test before close those issues:

- https://bugzilla.kernel.org/show_bug.cgi?id=189331
- https://bugzilla.kernel.org/show_bug.cgi?id=216632
- https://bugzilla.kernel.org/show_bug.cgi?id=216311
- https://bugzilla.kernel.org/show_bug.cgi?id=213507

Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
Message-ID: <20240310140249.3695-1-foss@athaariq.my.id>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 63 +++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index baf550b5a7c49..0c746613c5ae0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6696,6 +6696,60 @@ static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec,
 	}
 }
 
+static void alc285_fixup_hp_envy_x360(struct hda_codec *codec,
+				      const struct hda_fixup *fix,
+				      int action)
+{
+	static const struct coef_fw coefs[] = {
+		WRITE_COEF(0x08, 0x6a0c), WRITE_COEF(0x0d, 0xa023),
+		WRITE_COEF(0x10, 0x0320), WRITE_COEF(0x1a, 0x8c03),
+		WRITE_COEF(0x25, 0x1800), WRITE_COEF(0x26, 0x003a),
+		WRITE_COEF(0x28, 0x1dfe), WRITE_COEF(0x29, 0xb014),
+		WRITE_COEF(0x2b, 0x1dfe), WRITE_COEF(0x37, 0xfe15),
+		WRITE_COEF(0x38, 0x7909), WRITE_COEF(0x45, 0xd489),
+		WRITE_COEF(0x46, 0x00f4), WRITE_COEF(0x4a, 0x21e0),
+		WRITE_COEF(0x66, 0x03f0), WRITE_COEF(0x67, 0x1000),
+		WRITE_COEF(0x6e, 0x1005), { }
+	};
+
+	static const struct hda_pintbl pincfgs[] = {
+		{ 0x12, 0xb7a60130 },  /* Internal microphone*/
+		{ 0x14, 0x90170150 },  /* B&O soundbar speakers */
+		{ 0x17, 0x90170153 },  /* Side speakers */
+		{ 0x19, 0x03a11040 },  /* Headset microphone */
+		{ }
+	};
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_apply_pincfgs(codec, pincfgs);
+
+		/* Fixes volume control problem for side speakers */
+		alc295_fixup_disable_dac3(codec, fix, action);
+
+		/* Fixes no sound from headset speaker */
+		snd_hda_codec_amp_stereo(codec, 0x21, HDA_OUTPUT, 0, -1, 0);
+
+		/* Auto-enable headset mic when plugged */
+		snd_hda_jack_set_gating_jack(codec, 0x19, 0x21);
+
+		/* Headset mic volume enhancement */
+		snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREF50);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc_process_coef_fw(codec, coefs);
+		break;
+	case HDA_FIXUP_ACT_BUILD:
+		rename_ctl(codec, "Bass Speaker Playback Volume",
+			   "B&O-Tuned Playback Volume");
+		rename_ctl(codec, "Front Playback Switch",
+			   "B&O Soundbar Playback Switch");
+		rename_ctl(codec, "Bass Speaker Playback Switch",
+			   "Side Speaker Playback Switch");
+		break;
+	}
+}
+
 /* for hda_fixup_thinkpad_acpi() */
 #include "thinkpad_helper.c"
 
@@ -7291,6 +7345,7 @@ enum {
 	ALC280_FIXUP_HP_9480M,
 	ALC245_FIXUP_HP_X360_AMP,
 	ALC285_FIXUP_HP_SPECTRE_X360_EB1,
+	ALC285_FIXUP_HP_ENVY_X360,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC288_FIXUP_DELL_XPS_13,
@@ -9266,6 +9321,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_hp_spectre_x360_eb1
 	},
+	[ALC285_FIXUP_HP_ENVY_X360] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_hp_envy_x360,
+		.chained = true,
+		.chain_id = ALC285_FIXUP_HP_GPIO_AMP_INIT,
+	},
 	[ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_ideapad_s740_coef,
@@ -9848,6 +9909,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
 	SND_PCI_QUIRK(0x103c, 0x8537, "HP ProBook 440 G6", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+	SND_PCI_QUIRK(0x103c, 0x85de, "HP Envy x360 13-ar0xxx", ALC285_FIXUP_HP_ENVY_X360),
 	SND_PCI_QUIRK(0x103c, 0x860f, "HP ZBook 15 G6", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x861f, "HP Elite Dragonfly G1", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
@@ -10541,6 +10603,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"},
+	{.id = ALC285_FIXUP_HP_ENVY_X360, .name = "alc285-hp-envy-x360"},
 	{.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"},
 	{.id = ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, .name = "alc287-yoga9-bass-spk-pin"},
 	{.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"},
-- 
2.43.0

[PATCH 6.7 556/713] ALSA: hda/tas2781: use dev_dbg in system_resume

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit c850c9121cc8de867ce3ac36b9ae9d05f62bef14 ]

The system_resume function uses dev_info for tracing, but the other pm
functions use dev_dbg.

Use dev_dbg as the other pm functions.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <140f3c689c9eb5874e6eb48a570fcd8207f06a41.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 9f98965742e83..c39a5404fb392 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -813,7 +813,7 @@ static int tas2781_system_resume(struct device *dev)
 		tas_hda->priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
 	int i, ret;
 
-	dev_info(tas_hda->priv->dev, "System Resume\n");
+	dev_dbg(tas_hda->priv->dev, "System Resume\n");
 
 	ret = pm_runtime_force_resume(dev);
 	if (ret)
-- 
2.43.0

[PATCH 6.7 557/713] ALSA: hda/tas2781: add lock to system_suspend

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit c58e6ed55a1bb9811d6d936d001b068bb0419467 ]

Add the missing lock around tasdevice_tuning_switch().

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <c666da13d4bc48cd1ab1357479e0c6096541372c.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index c39a5404fb392..10b5624b1f1f0 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -796,9 +796,13 @@ static int tas2781_system_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	mutex_lock(&tas_hda->priv->codec_lock);
+
 	/* Shutdown chip before system suspend */
 	tasdevice_tuning_switch(tas_hda->priv, 1);
 
+	mutex_unlock(&tas_hda->priv->codec_lock);
+
 	/*
 	 * Reset GPIO may be shared, so cannot reset here.
 	 * However beyond this point, amps may be powered down.
-- 
2.43.0

[PATCH 6.7 558/713] ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit bec7760a6c5fa59593dac264fa0c628e46815986 ]

The amplifier doesn't loose register state in software shutdown mode, so
there is no need to reset the cur_* values.

Without these resets, the amplifier can be turned on after
runtime_suspend without waiting for the program and
profile to be restored.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa27ae084150988bf6a0ead7e3403bc485d790f8.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 10b5624b1f1f0..04539abf9e716 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -740,7 +740,6 @@ static void tas2781_hda_i2c_remove(struct i2c_client *clt)
 static int tas2781_runtime_suspend(struct device *dev)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	int i;
 
 	dev_dbg(tas_hda->dev, "Runtime Suspend\n");
 
@@ -751,12 +750,6 @@ static int tas2781_runtime_suspend(struct device *dev)
 		tas_hda->priv->playback_started = false;
 	}
 
-	for (i = 0; i < tas_hda->priv->ndev; i++) {
-		tas_hda->priv->tasdevice[i].cur_book = -1;
-		tas_hda->priv->tasdevice[i].cur_prog = -1;
-		tas_hda->priv->tasdevice[i].cur_conf = -1;
-	}
-
 	mutex_unlock(&tas_hda->priv->codec_lock);
 
 	return 0;
-- 
2.43.0

[PATCH 6.7 559/713] ALSA: hda/tas2781: add ptrs to calibration functions

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit 76f5f55c45b906710c9565a7e68c8d782c46b394 ]

Make calibration functions configurable to support different calibration
data storage modes.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 5f51de7e30c7 ("ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/tas2781.h           |  5 +++++
 sound/pci/hda/tas2781_hda_i2c.c   | 25 +++++++++++--------------
 sound/soc/codecs/tas2781-comlib.c | 15 +++++++++++++++
 3 files changed, 31 insertions(+), 14 deletions(-)

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
index 475294c853aa4..be58d870505a4 100644
--- a/include/sound/tas2781.h
+++ b/include/sound/tas2781.h
@@ -131,6 +131,9 @@ struct tasdevice_priv {
 		const struct firmware *fmw, int offset);
 	int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv,
 		struct tasdev_blk *block);
+
+	int (*save_calibration)(struct tasdevice_priv *tas_priv);
+	void (*apply_calibration)(struct tasdevice_priv *tas_priv);
 };
 
 void tas2781_reset(struct tasdevice_priv *tas_dev);
@@ -140,6 +143,8 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
 struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c);
 int tasdevice_init(struct tasdevice_priv *tas_priv);
 void tasdevice_remove(struct tasdevice_priv *tas_priv);
+int tasdevice_save_calibration(struct tasdevice_priv *tas_priv);
+void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv);
 int tasdevice_dev_read(struct tasdevice_priv *tas_priv,
 	unsigned short chn, unsigned int reg, unsigned int *value);
 int tasdevice_dev_write(struct tasdevice_priv *tas_priv,
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 04539abf9e716..167ee2f89e9d0 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -479,7 +479,7 @@ static int tas2781_save_calibration(struct tasdevice_priv *tas_priv)
 		dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
 			tm->tm_year, tm->tm_mon, tm->tm_mday,
 			tm->tm_hour, tm->tm_min, tm->tm_sec);
-		tas2781_apply_calib(tas_priv);
+		tasdevice_apply_calibration(tas_priv);
 	} else
 		tas_priv->cali_data.total_sz = 0;
 
@@ -582,7 +582,7 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context)
 	/* If calibrated data occurs error, dsp will still works with default
 	 * calibrated data inside algo.
 	 */
-	tas2781_save_calibration(tas_priv);
+	tasdevice_save_calibration(tas_priv);
 
 out:
 	mutex_unlock(&tas_hda->priv->codec_lock);
@@ -683,10 +683,6 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
 	const char *device_name;
 	int ret;
 
-	if (strstr(dev_name(&clt->dev), "TIAS2781"))
-		device_name = "TIAS2781";
-	else
-		return -ENODEV;
 
 	tas_hda = devm_kzalloc(&clt->dev, sizeof(*tas_hda), GFP_KERNEL);
 	if (!tas_hda)
@@ -699,6 +695,13 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
 	if (!tas_hda->priv)
 		return -ENOMEM;
 
+	if (strstr(dev_name(&clt->dev), "TIAS2781")) {
+		device_name = "TIAS2781";
+		tas_hda->priv->save_calibration = tas2781_save_calibration;
+		tas_hda->priv->apply_calibration = tas2781_apply_calib;
+	} else
+		return -ENODEV;
+
 	tas_hda->priv->irq_info.irq = clt->irq;
 	ret = tas2781_read_acpi(tas_hda->priv, device_name);
 	if (ret)
@@ -758,8 +761,6 @@ static int tas2781_runtime_suspend(struct device *dev)
 static int tas2781_runtime_resume(struct device *dev)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	unsigned long calib_data_sz =
-		tas_hda->priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
 
 	dev_dbg(tas_hda->dev, "Runtime Resume\n");
 
@@ -770,8 +771,7 @@ static int tas2781_runtime_resume(struct device *dev)
 	/* If calibrated data occurs error, dsp will still works with default
 	 * calibrated data inside algo.
 	 */
-	if (tas_hda->priv->cali_data.total_sz > calib_data_sz)
-		tas2781_apply_calib(tas_hda->priv);
+	tasdevice_apply_calibration(tas_hda->priv);
 
 	mutex_unlock(&tas_hda->priv->codec_lock);
 
@@ -806,8 +806,6 @@ static int tas2781_system_suspend(struct device *dev)
 static int tas2781_system_resume(struct device *dev)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	unsigned long calib_data_sz =
-		tas_hda->priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
 	int i, ret;
 
 	dev_dbg(tas_hda->priv->dev, "System Resume\n");
@@ -829,8 +827,7 @@ static int tas2781_system_resume(struct device *dev)
 	/* If calibrated data occurs error, dsp will still work with default
 	 * calibrated data inside algo.
 	 */
-	if (tas_hda->priv->cali_data.total_sz > calib_data_sz)
-		tas2781_apply_calib(tas_hda->priv);
+	tasdevice_apply_calibration(tas_hda->priv);
 	mutex_unlock(&tas_hda->priv->codec_lock);
 
 	return 0;
diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c
index add16302f711e..5d0e5348b361a 100644
--- a/sound/soc/codecs/tas2781-comlib.c
+++ b/sound/soc/codecs/tas2781-comlib.c
@@ -413,6 +413,21 @@ void tasdevice_remove(struct tasdevice_priv *tas_priv)
 }
 EXPORT_SYMBOL_GPL(tasdevice_remove);
 
+int tasdevice_save_calibration(struct tasdevice_priv *tas_priv)
+{
+	if (tas_priv->save_calibration)
+		return tas_priv->save_calibration(tas_priv);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(tasdevice_save_calibration);
+
+void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv)
+{
+	if (tas_priv->apply_calibration && tas_priv->cali_data.total_sz)
+		tas_priv->apply_calibration(tas_priv);
+}
+EXPORT_SYMBOL_GPL(tasdevice_apply_calibration);
+
 static int tasdevice_clamp(int val, int max, unsigned int invert)
 {
 	if (val > max)
-- 
2.43.0

[PATCH 6.7 560/713] ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit 5f51de7e30c7282162a631af8a425b54a4576346 ]

The runtime_resume function calls prmg_load and apply_calibration
functions, but system_resume also calls them, so calling
pm_runtime_force_resume before reset is unnecessary.

For consistency, do not call the pm_runtime_force_suspend in
system_suspend, as runtime_suspend does the same.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d0b4cc1248b9d375d59c009563da42d60d69eac3.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 167ee2f89e9d0..0479ae6e3644a 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -781,14 +781,9 @@ static int tas2781_runtime_resume(struct device *dev)
 static int tas2781_system_suspend(struct device *dev)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	int ret;
 
 	dev_dbg(tas_hda->priv->dev, "System Suspend\n");
 
-	ret = pm_runtime_force_suspend(dev);
-	if (ret)
-		return ret;
-
 	mutex_lock(&tas_hda->priv->codec_lock);
 
 	/* Shutdown chip before system suspend */
@@ -806,14 +801,10 @@ static int tas2781_system_suspend(struct device *dev)
 static int tas2781_system_resume(struct device *dev)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	int i, ret;
+	int i;
 
 	dev_dbg(tas_hda->priv->dev, "System Resume\n");
 
-	ret = pm_runtime_force_resume(dev);
-	if (ret)
-		return ret;
-
 	mutex_lock(&tas_hda->priv->codec_lock);
 
 	for (i = 0; i < tas_hda->priv->ndev; i++) {
-- 
2.43.0

[PATCH 6.7 561/713] ALSA: hda/tas2781: configure the amp after firmware load

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit 68f7f3ff6c2a0998be9dc07622bd0d16fd1fda20 ]

Make the amp available immediately after a module
load to avoid having to wait for a PCM hook action.
(eg. unloading & loading the module while listening
music)

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 9fc91a6fe37c ("ALSA: hda/tas2781: restore power state after system_resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 0479ae6e3644a..4b6e22a4b0c11 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -584,6 +584,8 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context)
 	 */
 	tasdevice_save_calibration(tas_priv);
 
+	tasdevice_tuning_switch(tas_hda->priv, 0);
+
 out:
 	mutex_unlock(&tas_hda->priv->codec_lock);
 	if (fmw)
-- 
2.43.0

[PATCH 6.7 562/713] ALSA: hda/tas2781: restore power state after system_resume

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit 9fc91a6fe37c78ef301aed4251f7e50b8524e72d ]

After system_resume the amplifers will remain off, even if they were on
before system_suspend.

Use playback_started bool to save the playback state, and restore power
state based on it.

Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <1742b61901781826f6e6212ffe1d21af542d134a.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/tas2781_hda_i2c.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 4b6e22a4b0c11..5179b69e403ac 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -142,11 +142,13 @@ static void tas2781_hda_playback_hook(struct device *dev, int action)
 		pm_runtime_get_sync(dev);
 		mutex_lock(&tas_hda->priv->codec_lock);
 		tasdevice_tuning_switch(tas_hda->priv, 0);
+		tas_hda->priv->playback_started = true;
 		mutex_unlock(&tas_hda->priv->codec_lock);
 		break;
 	case HDA_GEN_PCM_ACT_CLOSE:
 		mutex_lock(&tas_hda->priv->codec_lock);
 		tasdevice_tuning_switch(tas_hda->priv, 1);
+		tas_hda->priv->playback_started = false;
 		mutex_unlock(&tas_hda->priv->codec_lock);
 
 		pm_runtime_mark_last_busy(dev);
@@ -585,6 +587,7 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context)
 	tasdevice_save_calibration(tas_priv);
 
 	tasdevice_tuning_switch(tas_hda->priv, 0);
+	tas_hda->priv->playback_started = true;
 
 out:
 	mutex_unlock(&tas_hda->priv->codec_lock);
@@ -750,6 +753,9 @@ static int tas2781_runtime_suspend(struct device *dev)
 
 	mutex_lock(&tas_hda->priv->codec_lock);
 
+	/* The driver powers up the amplifiers at module load time.
+	 * Stop the playback if it's unused.
+	 */
 	if (tas_hda->priv->playback_started) {
 		tasdevice_tuning_switch(tas_hda->priv, 1);
 		tas_hda->priv->playback_started = false;
@@ -789,7 +795,8 @@ static int tas2781_system_suspend(struct device *dev)
 	mutex_lock(&tas_hda->priv->codec_lock);
 
 	/* Shutdown chip before system suspend */
-	tasdevice_tuning_switch(tas_hda->priv, 1);
+	if (tas_hda->priv->playback_started)
+		tasdevice_tuning_switch(tas_hda->priv, 1);
 
 	mutex_unlock(&tas_hda->priv->codec_lock);
 
@@ -821,6 +828,10 @@ static int tas2781_system_resume(struct device *dev)
 	 * calibrated data inside algo.
 	 */
 	tasdevice_apply_calibration(tas_hda->priv);
+
+	if (tas_hda->priv->playback_started)
+		tasdevice_tuning_switch(tas_hda->priv, 0);
+
 	mutex_unlock(&tas_hda->priv->codec_lock);
 
 	return 0;
-- 
2.43.0

[PATCH 6.7 563/713] ALSA: usb-audio: Stop parsing channels bits when all channels are found.

[Sasha Levin]

From: Johan Carlsson <johan.carlsson@teenage.engineering>

[ Upstream commit a39d51ff1f52cd0b6fe7d379ac93bd8b4237d1b7 ]

If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.

Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/stream.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 3d4add94e367d..d5409f3879455 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -300,9 +300,12 @@ static struct snd_pcm_chmap_elem *convert_chmap(int channels, unsigned int bits,
 	c = 0;
 
 	if (bits) {
-		for (; bits && *maps; maps++, bits >>= 1)
+		for (; bits && *maps; maps++, bits >>= 1) {
 			if (bits & 1)
 				chmap->map[c++] = *maps;
+			if (c == chmap->channels)
+				break;
+		}
 	} else {
 		/* If we're missing wChannelConfig, then guess something
 		    to make sure the channel map is not skipped entirely */
-- 
2.43.0

[PATCH 6.7 564/713] scsi: hisi_sas: Fix a deadlock issue related to automatic dump

[Sasha Levin]

From: Yihang Li <liyihang9@huawei.com>

[ Upstream commit 3c4f53b2c341ec6428b98cb51a89a09b025d0953 ]

If we issue a disabling PHY command, the device attached with it will go
offline, if a 2 bit ECC error occurs at the same time, a hung task may be
found:

[ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds.
[ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.674809] task:kworker/u256:0  state:D stack:    0 pid:165233 ppid:     2 flags:0x00000208
[ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas]
[ 4613.691518] Call trace:
[ 4613.694678]  __switch_to+0xf8/0x17c
[ 4613.698872]  __schedule+0x660/0xee0
[ 4613.703063]  schedule+0xac/0x240
[ 4613.706994]  schedule_timeout+0x500/0x610
[ 4613.711705]  __down+0x128/0x36c
[ 4613.715548]  down+0x240/0x2d0
[ 4613.719221]  hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main]
[ 4613.726618]  sas_execute_internal_abort+0x144/0x310 [libsas]
[ 4613.732976]  sas_execute_internal_abort_dev+0x44/0x60 [libsas]
[ 4613.739504]  hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main]
[ 4613.747499]  hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main]
[ 4613.753682]  sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas]
[ 4613.759781]  sas_unregister_common_dev+0x4c/0x7a0 [libsas]
[ 4613.765962]  sas_destruct_devices+0xb8/0x120 [libsas]
[ 4613.771709]  sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas]
[ 4613.778930]  sas_revalidate_domain+0x60/0xa4 [libsas]
[ 4613.784716]  process_one_work+0x248/0x950
[ 4613.789424]  worker_thread+0x318/0x934
[ 4613.793878]  kthread+0x190/0x200
[ 4613.797810]  ret_from_fork+0x10/0x18
[ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds.
[ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.824538] task:kworker/u256:4  state:D stack:    0 pid:316722 ppid:     2 flags:0x00000208
[ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main]
[ 4613.841491] Call trace:
[ 4613.844647]  __switch_to+0xf8/0x17c
[ 4613.848852]  __schedule+0x660/0xee0
[ 4613.853052]  schedule+0xac/0x240
[ 4613.856984]  schedule_timeout+0x500/0x610
[ 4613.861695]  __down+0x128/0x36c
[ 4613.865542]  down+0x240/0x2d0
[ 4613.869216]  hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main]
[ 4613.876324]  hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main]
[ 4613.883019]  process_one_work+0x248/0x950
[ 4613.887732]  worker_thread+0x318/0x934
[ 4613.892204]  kthread+0x190/0x200
[ 4613.896118]  ret_from_fork+0x10/0x18
[ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds.
[ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.922852] task:kworker/u256:1  state:D stack:    0 pid:348985 ppid:     2 flags:0x00000208
[ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas]
[ 4613.939549] Call trace:
[ 4613.942702]  __switch_to+0xf8/0x17c
[ 4613.946892]  __schedule+0x660/0xee0
[ 4613.951083]  schedule+0xac/0x240
[ 4613.955015]  schedule_timeout+0x500/0x610
[ 4613.959725]  wait_for_common+0x200/0x610
[ 4613.964349]  wait_for_completion+0x3c/0x5c
[ 4613.969146]  flush_workqueue+0x198/0x790
[ 4613.973776]  sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas]
[ 4613.979960]  sas_port_event_worker+0x54/0xa0 [libsas]
[ 4613.985708]  process_one_work+0x248/0x950
[ 4613.990420]  worker_thread+0x318/0x934
[ 4613.994868]  kthread+0x190/0x200
[ 4613.998800]  ret_from_fork+0x10/0x18

This is because when the device goes offline, we obtain the hisi_hba
semaphore and send the ABORT_DEV command to the device. However, the
internal abort timed out due to the 2 bit ECC error and triggers automatic
dump. In addition, since the hisi_hba semaphore has been obtained, the dump
cannot be executed and the controller cannot be reset.

Therefore, the deadlocks occur on the following circular dependencies:
hisi_sas_dev_gone() -> down() -> hisi_sas_internal_task_abort_dev() -> ...
-> hisi_sas_internal_abort_timeout() -> down().

The deadlock is triggered only when the timeout occurs during device goes
offline. To fix this issue, use .rst_ha_timeout to distinguish the scenario
where a device goes offline from other scenarios.

Fixes: 2ff07b5c6fe9 ("scsi: hisi_sas: Directly call register snapshot instead of using workqueue")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1705904747-62186-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index bbb7b2d9ffcfb..1abc62b07d24c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1962,9 +1962,17 @@ static bool hisi_sas_internal_abort_timeout(struct sas_task *task,
 	struct hisi_sas_internal_abort_data *timeout = data;
 
 	if (hisi_sas_debugfs_enable && hisi_hba->debugfs_itct[0].itct) {
-		down(&hisi_hba->sem);
+		/*
+		 * If timeout occurs in device gone scenario, to avoid
+		 * circular dependency like:
+		 * hisi_sas_dev_gone() -> down() -> ... ->
+		 * hisi_sas_internal_abort_timeout() -> down().
+		 */
+		if (!timeout->rst_ha_timeout)
+			down(&hisi_hba->sem);
 		hisi_hba->hw->debugfs_snapshot_regs(hisi_hba);
-		up(&hisi_hba->sem);
+		if (!timeout->rst_ha_timeout)
+			up(&hisi_hba->sem);
 	}
 
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-- 
2.43.0

[PATCH 6.7 565/713] RDMA/irdma: Remove duplicate assignment

[Sasha Levin]

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit 926e8ea4b8dac84f6d14a4b60d0653f1f2ba9431 ]

Remove the unneeded assignment of the qp_num which is already
set in irdma_create_qp().

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20240131233953.400483-1-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/verbs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c
index 0b046c061742b..12704efb7b19a 100644
--- a/drivers/infiniband/hw/irdma/verbs.c
+++ b/drivers/infiniband/hw/irdma/verbs.c
@@ -719,7 +719,6 @@ static int irdma_setup_kmode_qp(struct irdma_device *iwdev,
 		info->rq_pa + (ukinfo->rq_depth * IRDMA_QP_WQE_MIN_SIZE);
 	ukinfo->sq_size = ukinfo->sq_depth >> ukinfo->sq_shift;
 	ukinfo->rq_size = ukinfo->rq_depth >> ukinfo->rq_shift;
-	ukinfo->qp_id = iwqp->ibqp.qp_num;
 
 	iwqp->max_send_wr = (ukinfo->sq_depth - IRDMA_SQ_RSVD) >> ukinfo->sq_shift;
 	iwqp->max_recv_wr = (ukinfo->rq_depth - IRDMA_RQ_RSVD) >> ukinfo->rq_shift;
@@ -944,7 +943,7 @@ static int irdma_create_qp(struct ib_qp *ibqp,
 	iwqp->host_ctx.size = IRDMA_QP_CTX_SIZE;
 
 	init_info.pd = &iwpd->sc_pd;
-	init_info.qp_uk_init_info.qp_id = iwqp->ibqp.qp_num;
+	init_info.qp_uk_init_info.qp_id = qp_num;
 	if (!rdma_protocol_roce(&iwdev->ibdev, 1))
 		init_info.qp_uk_init_info.first_sq_wq = 1;
 	iwqp->ctx_info.qp_compl_ctx = (uintptr_t)qp;
-- 
2.43.0

[PATCH 6.7 566/713] RDMA/srpt: Do not register event handler until srpt device is fully setup

[Sasha Levin]

From: William Kucharski <william.kucharski@oracle.com>

[ Upstream commit c21a8870c98611e8f892511825c9607f1e2cd456 ]

Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().

This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.

Instead, only register the event handler after srpt device initialization
is complete.

Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Link: https://lore.kernel.org/r/20240202091549.991784-2-william.kucharski@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 040234c01be4d..9632afbd727b6 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -3209,7 +3209,6 @@ static int srpt_add_one(struct ib_device *device)
 
 	INIT_IB_EVENT_HANDLER(&sdev->event_handler, sdev->device,
 			      srpt_event_handler);
-	ib_register_event_handler(&sdev->event_handler);
 
 	for (i = 1; i <= sdev->device->phys_port_cnt; i++) {
 		sport = &sdev->port[i - 1];
@@ -3232,6 +3231,7 @@ static int srpt_add_one(struct ib_device *device)
 		}
 	}
 
+	ib_register_event_handler(&sdev->event_handler);
 	spin_lock(&srpt_dev_lock);
 	list_add_tail(&sdev->list, &srpt_dev_list);
 	spin_unlock(&srpt_dev_lock);
@@ -3242,7 +3242,6 @@ static int srpt_add_one(struct ib_device *device)
 
 err_port:
 	srpt_unregister_mad_agent(sdev, i);
-	ib_unregister_event_handler(&sdev->event_handler);
 err_cm:
 	if (sdev->cm_id)
 		ib_destroy_cm_id(sdev->cm_id);
-- 
2.43.0

[PATCH 6.7 567/713] f2fs: compress: fix to guarantee persisting compressed blocks by CP

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 8a430dd49e9cb021372b0ad91e60aeef9c6ced00 ]

If data block in compressed cluster is not persisted with metadata
during checkpoint, after SPOR, the data may be corrupted, let's
guarantee to write compressed page by checkpoint.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/compress.c |  4 +++-
 fs/f2fs/data.c     | 17 +++++++++--------
 fs/f2fs/f2fs.h     |  4 +++-
 3 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 62119f3f7206d..8453a06630208 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1420,6 +1420,8 @@ void f2fs_compress_write_end_io(struct bio *bio, struct page *page)
 	struct f2fs_sb_info *sbi = bio->bi_private;
 	struct compress_io_ctx *cic =
 			(struct compress_io_ctx *)page_private(page);
+	enum count_type type = WB_DATA_TYPE(page,
+				f2fs_is_compressed_page(page));
 	int i;
 
 	if (unlikely(bio->bi_status))
@@ -1427,7 +1429,7 @@ void f2fs_compress_write_end_io(struct bio *bio, struct page *page)
 
 	f2fs_compress_free_page(page);
 
-	dec_page_count(sbi, F2FS_WB_DATA);
+	dec_page_count(sbi, type);
 
 	if (atomic_dec_return(&cic->pending_pages))
 		return;
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index bc3f05d43b624..4b0c2ceb5dbfd 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -48,7 +48,7 @@ void f2fs_destroy_bioset(void)
 	bioset_exit(&f2fs_bioset);
 }
 
-static bool __is_cp_guaranteed(struct page *page)
+bool f2fs_is_cp_guaranteed(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
 	struct inode *inode;
@@ -65,8 +65,6 @@ static bool __is_cp_guaranteed(struct page *page)
 			S_ISDIR(inode->i_mode))
 		return true;
 
-	if (f2fs_is_compressed_page(page))
-		return false;
 	if ((S_ISREG(inode->i_mode) && IS_NOQUOTA(inode)) ||
 			page_private_gcing(page))
 		return true;
@@ -338,7 +336,7 @@ static void f2fs_write_end_io(struct bio *bio)
 
 	bio_for_each_segment_all(bvec, bio, iter_all) {
 		struct page *page = bvec->bv_page;
-		enum count_type type = WB_DATA_TYPE(page);
+		enum count_type type = WB_DATA_TYPE(page, false);
 
 		if (page_private_dummy(page)) {
 			clear_page_private_dummy(page);
@@ -762,7 +760,7 @@ int f2fs_submit_page_bio(struct f2fs_io_info *fio)
 		wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
 
 	inc_page_count(fio->sbi, is_read_io(fio->op) ?
-			__read_io_type(page) : WB_DATA_TYPE(fio->page));
+			__read_io_type(page) : WB_DATA_TYPE(fio->page, false));
 
 	if (is_read_io(bio_op(bio)))
 		f2fs_submit_read_bio(fio->sbi, bio, fio->type);
@@ -973,7 +971,7 @@ int f2fs_merge_page_bio(struct f2fs_io_info *fio)
 	if (fio->io_wbc)
 		wbc_account_cgroup_owner(fio->io_wbc, fio->page, PAGE_SIZE);
 
-	inc_page_count(fio->sbi, WB_DATA_TYPE(page));
+	inc_page_count(fio->sbi, WB_DATA_TYPE(page, false));
 
 	*fio->last_block = fio->new_blkaddr;
 	*fio->bio = bio;
@@ -1007,6 +1005,7 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 	enum page_type btype = PAGE_TYPE_OF_BIO(fio->type);
 	struct f2fs_bio_info *io = sbi->write_io[btype] + fio->temp;
 	struct page *bio_page;
+	enum count_type type;
 
 	f2fs_bug_on(sbi, is_read_io(fio->op));
 
@@ -1046,7 +1045,8 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 	/* set submitted = true as a return value */
 	fio->submitted = 1;
 
-	inc_page_count(sbi, WB_DATA_TYPE(bio_page));
+	type = WB_DATA_TYPE(bio_page, fio->compressed_page);
+	inc_page_count(sbi, type);
 
 	if (io->bio &&
 	    (!io_is_mergeable(sbi, io->bio, io, fio, io->last_block_in_bio,
@@ -1059,7 +1059,8 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 		if (F2FS_IO_ALIGNED(sbi) &&
 				(fio->type == DATA || fio->type == NODE) &&
 				fio->new_blkaddr & F2FS_IO_SIZE_MASK(sbi)) {
-			dec_page_count(sbi, WB_DATA_TYPE(bio_page));
+			dec_page_count(sbi, WB_DATA_TYPE(bio_page,
+						fio->compressed_page));
 			fio->retry = 1;
 			goto skip;
 		}
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 46ad7604a8b62..2f899d54d1837 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1075,7 +1075,8 @@ struct f2fs_sm_info {
  * f2fs monitors the number of several block types such as on-writeback,
  * dirty dentry blocks, dirty node blocks, and dirty meta blocks.
  */
-#define WB_DATA_TYPE(p)	(__is_cp_guaranteed(p) ? F2FS_WB_CP_DATA : F2FS_WB_DATA)
+#define WB_DATA_TYPE(p, f)			\
+	(f || f2fs_is_cp_guaranteed(p) ? F2FS_WB_CP_DATA : F2FS_WB_DATA)
 enum count_type {
 	F2FS_DIRTY_DENTS,
 	F2FS_DIRTY_DATA,
@@ -3797,6 +3798,7 @@ void f2fs_init_ckpt_req_control(struct f2fs_sb_info *sbi);
  */
 int __init f2fs_init_bioset(void);
 void f2fs_destroy_bioset(void);
+bool f2fs_is_cp_guaranteed(struct page *page);
 int f2fs_init_bio_entry_cache(void);
 void f2fs_destroy_bio_entry_cache(void);
 void f2fs_submit_read_bio(struct f2fs_sb_info *sbi, struct bio *bio,
-- 
2.43.0

[PATCH 6.7 568/713] f2fs: compress: fix to cover normal cluster write with cp_rwsem

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit fd244524c2cf07b5f4c3fe8abd6a99225c76544b ]

When we overwrite compressed cluster w/ normal cluster, we should
not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data
will be corrupted if partial blocks were persisted before CP & SPOR,
due to cluster metadata wasn't updated atomically.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/compress.c | 27 ++++++++++++++++++---------
 fs/f2fs/data.c     |  3 ++-
 2 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 8453a06630208..94e0b0aa95e9b 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1445,12 +1445,14 @@ void f2fs_compress_write_end_io(struct bio *bio, struct page *page)
 }
 
 static int f2fs_write_raw_pages(struct compress_ctx *cc,
-					int *submitted,
+					int *submitted_p,
 					struct writeback_control *wbc,
 					enum iostat_type io_type)
 {
 	struct address_space *mapping = cc->inode->i_mapping;
-	int _submitted, compr_blocks, ret, i;
+	struct f2fs_sb_info *sbi = F2FS_M_SB(mapping);
+	int submitted, compr_blocks, i;
+	int ret = 0;
 
 	compr_blocks = f2fs_compressed_blocks(cc);
 
@@ -1465,6 +1467,10 @@ static int f2fs_write_raw_pages(struct compress_ctx *cc,
 	if (compr_blocks < 0)
 		return compr_blocks;
 
+	/* overwrite compressed cluster w/ normal cluster */
+	if (compr_blocks > 0)
+		f2fs_lock_op(sbi);
+
 	for (i = 0; i < cc->cluster_size; i++) {
 		if (!cc->rpages[i])
 			continue;
@@ -1489,7 +1495,7 @@ static int f2fs_write_raw_pages(struct compress_ctx *cc,
 		if (!clear_page_dirty_for_io(cc->rpages[i]))
 			goto continue_unlock;
 
-		ret = f2fs_write_single_data_page(cc->rpages[i], &_submitted,
+		ret = f2fs_write_single_data_page(cc->rpages[i], &submitted,
 						NULL, NULL, wbc, io_type,
 						compr_blocks, false);
 		if (ret) {
@@ -1497,26 +1503,29 @@ static int f2fs_write_raw_pages(struct compress_ctx *cc,
 				unlock_page(cc->rpages[i]);
 				ret = 0;
 			} else if (ret == -EAGAIN) {
+				ret = 0;
 				/*
 				 * for quota file, just redirty left pages to
 				 * avoid deadlock caused by cluster update race
 				 * from foreground operation.
 				 */
 				if (IS_NOQUOTA(cc->inode))
-					return 0;
-				ret = 0;
+					goto out;
 				f2fs_io_schedule_timeout(DEFAULT_IO_TIMEOUT);
 				goto retry_write;
 			}
-			return ret;
+			goto out;
 		}
 
-		*submitted += _submitted;
+		*submitted_p += submitted;
 	}
 
-	f2fs_balance_fs(F2FS_M_SB(mapping), true);
+out:
+	if (compr_blocks > 0)
+		f2fs_unlock_op(sbi);
 
-	return 0;
+	f2fs_balance_fs(sbi, true);
+	return ret;
 }
 
 int f2fs_write_multi_pages(struct compress_ctx *cc,
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 4b0c2ceb5dbfd..b7845be96f6d4 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2851,7 +2851,7 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 		.encrypted_page = NULL,
 		.submitted = 0,
 		.compr_blocks = compr_blocks,
-		.need_lock = LOCK_RETRY,
+		.need_lock = compr_blocks ? LOCK_DONE : LOCK_RETRY,
 		.post_read = f2fs_post_read_required(inode) ? 1 : 0,
 		.io_type = io_type,
 		.io_wbc = wbc,
@@ -2935,6 +2935,7 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 	if (err == -EAGAIN) {
 		err = f2fs_do_write_data_page(&fio);
 		if (err == -EAGAIN) {
+			f2fs_bug_on(sbi, compr_blocks);
 			fio.need_lock = LOCK_REQ;
 			err = f2fs_do_write_data_page(&fio);
 		}
-- 
2.43.0

[PATCH 6.7 569/713] f2fs: compress: fix to check unreleased compressed cluster

[Sasha Levin]

From: Sheng Yong <shengyong@oppo.com>

[ Upstream commit eb8fbaa53374e0a2d4381190abfe708481517bbb ]

Compressed cluster may not be released due to we can fail in
release_compress_blocks(), fix to handle reserved compressed
cluster correctly in reserve_compress_blocks().

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index a05781e708d66..01b6295341918 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3631,7 +3631,13 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 				goto next;
 			}
 
-			if (__is_valid_data_blkaddr(blkaddr)) {
+			/*
+			 * compressed cluster was not released due to it
+			 * fails in release_compress_blocks(), so NEW_ADDR
+			 * is a possible case.
+			 */
+			if (blkaddr == NEW_ADDR ||
+				__is_valid_data_blkaddr(blkaddr)) {
 				compr_blocks++;
 				continue;
 			}
@@ -3641,6 +3647,11 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 		}
 
 		reserved = cluster_size - compr_blocks;
+
+		/* for the case all blocks in cluster were reserved */
+		if (reserved == 1)
+			goto next;
+
 		ret = inc_valid_block_count(sbi, dn->inode, &reserved);
 		if (ret)
 			return ret;
-- 
2.43.0

[PATCH 6.7 570/713] f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit a53936361330e4c55c0654605178281387d9c761 ]

Commit 3c6c2bebef79 ("f2fs: avoid punch_hole overhead when releasing
volatile data") introduced FI_FIRST_BLOCK_WRITTEN as below reason:

This patch is to avoid some punch_hole overhead when releasing volatile
data. If volatile data was not written yet, we just can make the first
page as zero.

After commit 7bc155fec5b3 ("f2fs: kill volatile write support"), we
won't support volatile write, but it missed to remove obsolete
FI_FIRST_BLOCK_WRITTEN, delete it in this patch.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/compress.c |  2 --
 fs/f2fs/data.c     |  2 --
 fs/f2fs/f2fs.h     |  6 ------
 fs/f2fs/file.c     |  3 ---
 fs/f2fs/gc.c       |  2 --
 fs/f2fs/inode.c    | 25 -------------------------
 6 files changed, 40 deletions(-)

diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 94e0b0aa95e9b..06e9bbfba1f1a 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1371,8 +1371,6 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
 	add_compr_block_stat(inode, cc->valid_nr_cpages);
 
 	set_inode_flag(cc->inode, FI_APPEND_WRITE);
-	if (cc->cluster_idx == 0)
-		set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
 
 	f2fs_put_dnode(&dn);
 	if (quota_inode)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index b7845be96f6d4..ce9dd11c62886 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2812,8 +2812,6 @@ int f2fs_do_write_data_page(struct f2fs_io_info *fio)
 	f2fs_outplace_write_data(&dn, fio);
 	trace_f2fs_do_write_data_page(page, OPU);
 	set_inode_flag(inode, FI_APPEND_WRITE);
-	if (page->index == 0)
-		set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
 out_writepage:
 	f2fs_put_dnode(&dn);
 out:
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 2f899d54d1837..d94ae53356b52 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -774,7 +774,6 @@ enum {
 	FI_UPDATE_WRITE,	/* inode has in-place-update data */
 	FI_NEED_IPU,		/* used for ipu per file */
 	FI_ATOMIC_FILE,		/* indicate atomic file */
-	FI_FIRST_BLOCK_WRITTEN,	/* indicate #0 data block was written */
 	FI_DROP_CACHE,		/* drop dirty page cache */
 	FI_DATA_EXIST,		/* indicate data exists */
 	FI_INLINE_DOTS,		/* indicate inline dot dentries */
@@ -3273,11 +3272,6 @@ static inline bool f2fs_is_cow_file(struct inode *inode)
 	return is_inode_flag_set(inode, FI_COW_FILE);
 }
 
-static inline bool f2fs_is_first_block_written(struct inode *inode)
-{
-	return is_inode_flag_set(inode, FI_FIRST_BLOCK_WRITTEN);
-}
-
 static inline bool f2fs_is_drop_cache(struct inode *inode)
 {
 	return is_inode_flag_set(inode, FI_DROP_CACHE);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 01b6295341918..14eecc63dc077 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -599,9 +599,6 @@ void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
 				valid_blocks++;
 		}
 
-		if (dn->ofs_in_node == 0 && IS_INODE(dn->node_page))
-			clear_inode_flag(dn->inode, FI_FIRST_BLOCK_WRITTEN);
-
 		f2fs_invalidate_blocks(sbi, blkaddr);
 
 		if (!released || blkaddr != COMPRESS_ADDR)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index f550cdeaa6638..2fbe16ad726f4 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1405,8 +1405,6 @@ static int move_data_block(struct inode *inode, block_t bidx,
 
 	f2fs_update_data_blkaddr(&dn, newaddr);
 	set_inode_flag(inode, FI_APPEND_WRITE);
-	if (page->index == 0)
-		set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
 put_page_out:
 	f2fs_put_page(fio.encrypted_page, 1);
 recover_block:
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 560bfcad1af23..108e3d00028a1 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -76,20 +76,6 @@ static void __get_inode_rdev(struct inode *inode, struct f2fs_inode *ri)
 	}
 }
 
-static int __written_first_block(struct f2fs_sb_info *sbi,
-					struct f2fs_inode *ri)
-{
-	block_t addr = le32_to_cpu(ri->i_addr[offset_in_addr(ri)]);
-
-	if (!__is_valid_data_blkaddr(addr))
-		return 1;
-	if (!f2fs_is_valid_blkaddr(sbi, addr, DATA_GENERIC_ENHANCE)) {
-		f2fs_handle_error(sbi, ERROR_INVALID_BLKADDR);
-		return -EFSCORRUPTED;
-	}
-	return 0;
-}
-
 static void __set_inode_rdev(struct inode *inode, struct f2fs_inode *ri)
 {
 	int extra_size = get_extra_isize(inode);
@@ -398,7 +384,6 @@ static int do_read_inode(struct inode *inode)
 	struct page *node_page;
 	struct f2fs_inode *ri;
 	projid_t i_projid;
-	int err;
 
 	/* Check if ino is within scope */
 	if (f2fs_check_nid_range(sbi, inode->i_ino))
@@ -480,16 +465,6 @@ static int do_read_inode(struct inode *inode)
 	/* get rdev by using inline_info */
 	__get_inode_rdev(inode, ri);
 
-	if (S_ISREG(inode->i_mode)) {
-		err = __written_first_block(sbi, ri);
-		if (err < 0) {
-			f2fs_put_page(node_page, 1);
-			return err;
-		}
-		if (!err)
-			set_inode_flag(inode, FI_FIRST_BLOCK_WRITTEN);
-	}
-
 	if (!f2fs_need_inode_block_update(sbi, inode->i_ino))
 		fi->last_disk_size = inode->i_size;
 
-- 
2.43.0

[PATCH 6.7 571/713] f2fs: delete obsolete FI_DROP_CACHE

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit bb6e1c8fa5b9b95bbb8e39b6105f8f6550e070fc ]

FI_DROP_CACHE was introduced in commit 1e84371ffeef ("f2fs: change
atomic and volatile write policies") for volatile write feature,
after commit 7bc155fec5b3 ("f2fs: kill volatile write support"),
we won't support volatile write, let's delete related codes.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 3 ---
 fs/f2fs/f2fs.h | 6 ------
 2 files changed, 9 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index ce9dd11c62886..aedb5f6bf75ac 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2894,9 +2894,6 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 
 	zero_user_segment(page, offset, PAGE_SIZE);
 write:
-	if (f2fs_is_drop_cache(inode))
-		goto out;
-
 	/* Dentry/quota blocks are controlled by checkpoint */
 	if (S_ISDIR(inode->i_mode) || quota_inode) {
 		/*
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index d94ae53356b52..27dcda5a237e1 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -774,7 +774,6 @@ enum {
 	FI_UPDATE_WRITE,	/* inode has in-place-update data */
 	FI_NEED_IPU,		/* used for ipu per file */
 	FI_ATOMIC_FILE,		/* indicate atomic file */
-	FI_DROP_CACHE,		/* drop dirty page cache */
 	FI_DATA_EXIST,		/* indicate data exists */
 	FI_INLINE_DOTS,		/* indicate inline dot dentries */
 	FI_SKIP_WRITES,		/* should skip data page writeback */
@@ -3272,11 +3271,6 @@ static inline bool f2fs_is_cow_file(struct inode *inode)
 	return is_inode_flag_set(inode, FI_COW_FILE);
 }
 
-static inline bool f2fs_is_drop_cache(struct inode *inode)
-{
-	return is_inode_flag_set(inode, FI_DROP_CACHE);
-}
-
 static inline void *inline_data_addr(struct inode *inode, struct page *page)
 {
 	struct f2fs_inode *ri = F2FS_INODE(page);
-- 
2.43.0

[PATCH 6.7 572/713] f2fs: introduce get_dnode_addr() to clean up codes

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 2020cd48e41cb8470bb1ca0835033d13d3178425 ]

Just cleanup, no logic changes.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c  | 11 ++---------
 fs/f2fs/f2fs.h  | 18 +++++++++++++++---
 fs/f2fs/file.c  |  8 +-------
 fs/f2fs/inode.c | 32 ++++++++++++++------------------
 4 files changed, 32 insertions(+), 37 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index aedb5f6bf75ac..d1cccfded001b 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1182,16 +1182,9 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
 
 static void __set_data_blkaddr(struct dnode_of_data *dn)
 {
-	struct f2fs_node *rn = F2FS_NODE(dn->node_page);
-	__le32 *addr_array;
-	int base = 0;
+	__le32 *addr = get_dnode_addr(dn->inode, dn->node_page);
 
-	if (IS_INODE(dn->node_page) && f2fs_has_extra_attr(dn->inode))
-		base = get_extra_isize(dn->inode);
-
-	/* Get physical address of data block */
-	addr_array = blkaddr_in_node(rn);
-	addr_array[base + dn->ofs_in_node] = cpu_to_le32(dn->data_blkaddr);
+	addr[dn->ofs_in_node] = cpu_to_le32(dn->data_blkaddr);
 }
 
 /*
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 27dcda5a237e1..fa38de60c716c 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3271,12 +3271,13 @@ static inline bool f2fs_is_cow_file(struct inode *inode)
 	return is_inode_flag_set(inode, FI_COW_FILE);
 }
 
+static inline __le32 *get_dnode_addr(struct inode *inode,
+					struct page *node_page);
 static inline void *inline_data_addr(struct inode *inode, struct page *page)
 {
-	struct f2fs_inode *ri = F2FS_INODE(page);
-	int extra_size = get_extra_isize(inode);
+	__le32 *addr = get_dnode_addr(inode, page);
 
-	return (void *)&(ri->i_addr[extra_size + DEF_INLINE_RESERVED_SIZE]);
+	return (void *)(addr + DEF_INLINE_RESERVED_SIZE);
 }
 
 static inline int f2fs_has_inline_dentry(struct inode *inode)
@@ -3421,6 +3422,17 @@ static inline int get_inline_xattr_addrs(struct inode *inode)
 	return F2FS_I(inode)->i_inline_xattr_size;
 }
 
+static inline __le32 *get_dnode_addr(struct inode *inode,
+					struct page *node_page)
+{
+	int base = 0;
+
+	if (IS_INODE(node_page) && f2fs_has_extra_attr(inode))
+		base = get_extra_isize(inode);
+
+	return blkaddr_in_node(F2FS_NODE(node_page)) + base;
+}
+
 #define f2fs_get_inode_mode(i) \
 	((is_inode_flag_set(i, FI_ACL_MODE)) ? \
 	 (F2FS_I(i)->i_acl_mode) : ((i)->i_mode))
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 14eecc63dc077..4f07fb0097965 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -557,20 +557,14 @@ static int f2fs_file_open(struct inode *inode, struct file *filp)
 void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
-	struct f2fs_node *raw_node;
 	int nr_free = 0, ofs = dn->ofs_in_node, len = count;
 	__le32 *addr;
-	int base = 0;
 	bool compressed_cluster = false;
 	int cluster_index = 0, valid_blocks = 0;
 	int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
 	bool released = !atomic_read(&F2FS_I(dn->inode)->i_compr_blocks);
 
-	if (IS_INODE(dn->node_page) && f2fs_has_extra_attr(dn->inode))
-		base = get_extra_isize(dn->inode);
-
-	raw_node = F2FS_NODE(dn->node_page);
-	addr = blkaddr_in_node(raw_node) + base + ofs;
+	addr = get_dnode_addr(dn->inode, dn->node_page) + ofs;
 
 	/* Assumption: truncation starts with cluster */
 	for (; count > 0; count--, addr++, dn->ofs_in_node++, cluster_index++) {
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 108e3d00028a1..b31410c4afbc1 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -61,35 +61,31 @@ void f2fs_set_inode_flags(struct inode *inode)
 			S_ENCRYPTED|S_VERITY|S_CASEFOLD);
 }
 
-static void __get_inode_rdev(struct inode *inode, struct f2fs_inode *ri)
+static void __get_inode_rdev(struct inode *inode, struct page *node_page)
 {
-	int extra_size = get_extra_isize(inode);
+	__le32 *addr = get_dnode_addr(inode, node_page);
 
 	if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) ||
 			S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
-		if (ri->i_addr[extra_size])
-			inode->i_rdev = old_decode_dev(
-				le32_to_cpu(ri->i_addr[extra_size]));
+		if (addr[0])
+			inode->i_rdev = old_decode_dev(le32_to_cpu(addr[0]));
 		else
-			inode->i_rdev = new_decode_dev(
-				le32_to_cpu(ri->i_addr[extra_size + 1]));
+			inode->i_rdev = new_decode_dev(le32_to_cpu(addr[1]));
 	}
 }
 
-static void __set_inode_rdev(struct inode *inode, struct f2fs_inode *ri)
+static void __set_inode_rdev(struct inode *inode, struct page *node_page)
 {
-	int extra_size = get_extra_isize(inode);
+	__le32 *addr = get_dnode_addr(inode, node_page);
 
 	if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) {
 		if (old_valid_dev(inode->i_rdev)) {
-			ri->i_addr[extra_size] =
-				cpu_to_le32(old_encode_dev(inode->i_rdev));
-			ri->i_addr[extra_size + 1] = 0;
+			addr[0] = cpu_to_le32(old_encode_dev(inode->i_rdev));
+			addr[1] = 0;
 		} else {
-			ri->i_addr[extra_size] = 0;
-			ri->i_addr[extra_size + 1] =
-				cpu_to_le32(new_encode_dev(inode->i_rdev));
-			ri->i_addr[extra_size + 2] = 0;
+			addr[0] = 0;
+			addr[1] = cpu_to_le32(new_encode_dev(inode->i_rdev));
+			addr[2] = 0;
 		}
 	}
 }
@@ -463,7 +459,7 @@ static int do_read_inode(struct inode *inode)
 	}
 
 	/* get rdev by using inline_info */
-	__get_inode_rdev(inode, ri);
+	__get_inode_rdev(inode, node_page);
 
 	if (!f2fs_need_inode_block_update(sbi, inode->i_ino))
 		fi->last_disk_size = inode->i_size;
@@ -736,7 +732,7 @@ void f2fs_update_inode(struct inode *inode, struct page *node_page)
 		}
 	}
 
-	__set_inode_rdev(inode, ri);
+	__set_inode_rdev(inode, node_page);
 
 	/* deleted inode */
 	if (inode->i_nlink == 0)
-- 
2.43.0

[PATCH 6.7 573/713] f2fs: update blkaddr in __set_data_blkaddr() for cleanup

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 59d0d4c3eae0f3dd8886ed59f89f21fa09e324f5 ]

This patch allows caller to pass blkaddr to f2fs_set_data_blkaddr()
and let __set_data_blkaddr() inside f2fs_set_data_blkaddr() to update
dn->data_blkaddr w/ last value of blkaddr.

Just cleanup, no logic changes.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 13 ++++++-------
 fs/f2fs/f2fs.h |  2 +-
 fs/f2fs/file.c | 12 ++++--------
 3 files changed, 11 insertions(+), 16 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index d1cccfded001b..88cdbb815880a 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1180,10 +1180,11 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
 	return 0;
 }
 
-static void __set_data_blkaddr(struct dnode_of_data *dn)
+static void __set_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
 {
 	__le32 *addr = get_dnode_addr(dn->inode, dn->node_page);
 
+	dn->data_blkaddr = blkaddr;
 	addr[dn->ofs_in_node] = cpu_to_le32(dn->data_blkaddr);
 }
 
@@ -1193,18 +1194,17 @@ static void __set_data_blkaddr(struct dnode_of_data *dn)
  *  ->node_page
  *    update block addresses in the node page
  */
-void f2fs_set_data_blkaddr(struct dnode_of_data *dn)
+void f2fs_set_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
 {
 	f2fs_wait_on_page_writeback(dn->node_page, NODE, true, true);
-	__set_data_blkaddr(dn);
+	__set_data_blkaddr(dn, blkaddr);
 	if (set_page_dirty(dn->node_page))
 		dn->node_changed = true;
 }
 
 void f2fs_update_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr)
 {
-	dn->data_blkaddr = blkaddr;
-	f2fs_set_data_blkaddr(dn);
+	f2fs_set_data_blkaddr(dn, blkaddr);
 	f2fs_update_read_extent_cache(dn);
 }
 
@@ -1231,8 +1231,7 @@ int f2fs_reserve_new_blocks(struct dnode_of_data *dn, blkcnt_t count)
 		block_t blkaddr = f2fs_data_blkaddr(dn);
 
 		if (blkaddr == NULL_ADDR) {
-			dn->data_blkaddr = NEW_ADDR;
-			__set_data_blkaddr(dn);
+			__set_data_blkaddr(dn, NEW_ADDR);
 			count--;
 		}
 	}
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fa38de60c716c..a05816556552c 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3817,7 +3817,7 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio);
 struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
 		block_t blk_addr, sector_t *sector);
 int f2fs_target_device_index(struct f2fs_sb_info *sbi, block_t blkaddr);
-void f2fs_set_data_blkaddr(struct dnode_of_data *dn);
+void f2fs_set_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr);
 void f2fs_update_data_blkaddr(struct dnode_of_data *dn, block_t blkaddr);
 int f2fs_reserve_new_blocks(struct dnode_of_data *dn, blkcnt_t count);
 int f2fs_reserve_new_block(struct dnode_of_data *dn);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 4f07fb0097965..2ea1ddd4e941f 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -582,8 +582,7 @@ void f2fs_truncate_data_blocks_range(struct dnode_of_data *dn, int count)
 		if (blkaddr == NULL_ADDR)
 			continue;
 
-		dn->data_blkaddr = NULL_ADDR;
-		f2fs_set_data_blkaddr(dn);
+		f2fs_set_data_blkaddr(dn, NULL_ADDR);
 
 		if (__is_valid_data_blkaddr(blkaddr)) {
 			if (!f2fs_is_valid_blkaddr(sbi, blkaddr,
@@ -1479,8 +1478,7 @@ static int f2fs_do_zero_range(struct dnode_of_data *dn, pgoff_t start,
 		}
 
 		f2fs_invalidate_blocks(sbi, dn->data_blkaddr);
-		dn->data_blkaddr = NEW_ADDR;
-		f2fs_set_data_blkaddr(dn);
+		f2fs_set_data_blkaddr(dn, NEW_ADDR);
 	}
 
 	f2fs_update_read_extent_cache_range(dn, start, 0, index - start);
@@ -3460,8 +3458,7 @@ static int release_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 			if (blkaddr != NEW_ADDR)
 				continue;
 
-			dn->data_blkaddr = NULL_ADDR;
-			f2fs_set_data_blkaddr(dn);
+			f2fs_set_data_blkaddr(dn, NULL_ADDR);
 		}
 
 		f2fs_i_compr_blocks_update(dn->inode, compr_blocks, false);
@@ -3633,8 +3630,7 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 				continue;
 			}
 
-			dn->data_blkaddr = NEW_ADDR;
-			f2fs_set_data_blkaddr(dn);
+			f2fs_set_data_blkaddr(dn, NEW_ADDR);
 		}
 
 		reserved = cluster_size - compr_blocks;
-- 
2.43.0

[PATCH 6.7 574/713] f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 54607494875edd636aff3c21ace3ad9a7da758a9 ]

In reserve_compress_blocks(), we update blkaddrs of dnode in prior to
inc_valid_block_count(), it may cause inconsistent status bewteen
i_blocks and blkaddrs once inc_valid_block_count() fails.

To fix this issue, it needs to reverse their invoking order.

Fixes: c75488fb4d82 ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c    |  5 +++--
 fs/f2fs/f2fs.h    |  7 ++++++-
 fs/f2fs/file.c    | 26 ++++++++++++++------------
 fs/f2fs/segment.c |  2 +-
 4 files changed, 24 insertions(+), 16 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 88cdbb815880a..41091287f5439 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1219,7 +1219,8 @@ int f2fs_reserve_new_blocks(struct dnode_of_data *dn, blkcnt_t count)
 
 	if (unlikely(is_inode_flag_set(dn->inode, FI_NO_ALLOC)))
 		return -EPERM;
-	if (unlikely((err = inc_valid_block_count(sbi, dn->inode, &count))))
+	err = inc_valid_block_count(sbi, dn->inode, &count, true);
+	if (unlikely(err))
 		return err;
 
 	trace_f2fs_reserve_new_blocks(dn->inode, dn->nid,
@@ -1476,7 +1477,7 @@ static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
 
 	dn->data_blkaddr = f2fs_data_blkaddr(dn);
 	if (dn->data_blkaddr == NULL_ADDR) {
-		err = inc_valid_block_count(sbi, dn->inode, &count);
+		err = inc_valid_block_count(sbi, dn->inode, &count, true);
 		if (unlikely(err))
 			return err;
 	}
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index a05816556552c..fb355b9e2e3ca 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -2245,7 +2245,7 @@ static inline bool __allow_reserved_blocks(struct f2fs_sb_info *sbi,
 
 static inline void f2fs_i_blocks_write(struct inode *, block_t, bool, bool);
 static inline int inc_valid_block_count(struct f2fs_sb_info *sbi,
-				 struct inode *inode, blkcnt_t *count)
+				 struct inode *inode, blkcnt_t *count, bool partial)
 {
 	blkcnt_t diff = 0, release = 0;
 	block_t avail_user_block_count;
@@ -2285,6 +2285,11 @@ static inline int inc_valid_block_count(struct f2fs_sb_info *sbi,
 			avail_user_block_count = 0;
 	}
 	if (unlikely(sbi->total_valid_block_count > avail_user_block_count)) {
+		if (!partial) {
+			spin_unlock(&sbi->stat_lock);
+			goto enospc;
+		}
+
 		diff = sbi->total_valid_block_count - avail_user_block_count;
 		if (diff > *count)
 			diff = *count;
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 2ea1ddd4e941f..762b664ef38b2 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3609,14 +3609,16 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 		blkcnt_t reserved;
 		int ret;
 
-		for (i = 0; i < cluster_size; i++, dn->ofs_in_node++) {
-			blkaddr = f2fs_data_blkaddr(dn);
+		for (i = 0; i < cluster_size; i++) {
+			blkaddr = data_blkaddr(dn->inode, dn->node_page,
+						dn->ofs_in_node + i);
 
 			if (i == 0) {
-				if (blkaddr == COMPRESS_ADDR)
-					continue;
-				dn->ofs_in_node += cluster_size;
-				goto next;
+				if (blkaddr != COMPRESS_ADDR) {
+					dn->ofs_in_node += cluster_size;
+					goto next;
+				}
+				continue;
 			}
 
 			/*
@@ -3629,8 +3631,6 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 				compr_blocks++;
 				continue;
 			}
-
-			f2fs_set_data_blkaddr(dn, NEW_ADDR);
 		}
 
 		reserved = cluster_size - compr_blocks;
@@ -3639,12 +3639,14 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 		if (reserved == 1)
 			goto next;
 
-		ret = inc_valid_block_count(sbi, dn->inode, &reserved);
-		if (ret)
+		ret = inc_valid_block_count(sbi, dn->inode, &reserved, false);
+		if (unlikely(ret))
 			return ret;
 
-		if (reserved != cluster_size - compr_blocks)
-			return -ENOSPC;
+		for (i = 0; i < cluster_size; i++, dn->ofs_in_node++) {
+			if (f2fs_data_blkaddr(dn) == NULL_ADDR)
+				f2fs_set_data_blkaddr(dn, NEW_ADDR);
+		}
 
 		f2fs_i_compr_blocks_update(dn->inode, compr_blocks, true);
 
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 727d016318f98..cb49b2d15c59d 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -248,7 +248,7 @@ static int __replace_atomic_write_block(struct inode *inode, pgoff_t index,
 	} else {
 		blkcnt_t count = 1;
 
-		err = inc_valid_block_count(sbi, inode, &count);
+		err = inc_valid_block_count(sbi, inode, &count, true);
 		if (err) {
 			f2fs_put_dnode(&dn);
 			return err;
-- 
2.43.0

[PATCH 6.7 575/713] f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit b896e302f79678451a94769ddd9e52e954c64fbb ]

verify_blkaddr() will trigger panic once we inject fault into
f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on().

Fixes: 18792e64c86d ("f2fs: support fault injection for f2fs_is_valid_blkaddr()")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fb355b9e2e3ca..2401d91ebc25a 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3463,11 +3463,9 @@ bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 static inline void verify_blkaddr(struct f2fs_sb_info *sbi,
 					block_t blkaddr, int type)
 {
-	if (!f2fs_is_valid_blkaddr(sbi, blkaddr, type)) {
+	if (!f2fs_is_valid_blkaddr(sbi, blkaddr, type))
 		f2fs_err(sbi, "invalid blkaddr: %u, type: %d, run fsck to fix.",
 			 blkaddr, type);
-		f2fs_bug_on(sbi, 1);
-	}
 }
 
 static inline bool __is_valid_data_blkaddr(block_t blkaddr)
-- 
2.43.0

[PATCH 6.7 576/713] f2fs: zone: fix to wait completion of last bio in zone correctly

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 536af8211586af09c5bea1c15ad28ddec5f66a97 ]

It needs to check last zone_pending_bio and wait IO completion before
traverse next fio in io->io_list, otherwise, bio in next zone may be
submitted before all IO completion in current zone.

Fixes: e067dc3c6b9c ("f2fs: maintain six open zones for zoned devices")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 41091287f5439..cd9f1c6039c49 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1010,7 +1010,7 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 	f2fs_bug_on(sbi, is_read_io(fio->op));
 
 	f2fs_down_write(&io->io_rwsem);
-
+next:
 #ifdef CONFIG_BLK_DEV_ZONED
 	if (f2fs_sb_has_blkzoned(sbi) && btype < META && io->zone_pending_bio) {
 		wait_for_completion_io(&io->zone_wait);
@@ -1020,7 +1020,6 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 	}
 #endif
 
-next:
 	if (fio->in_list) {
 		spin_lock(&io->io_lock);
 		if (list_empty(&io->io_list)) {
-- 
2.43.0

[PATCH 6.7 577/713] f2fs: fix NULL pointer dereference in f2fs_submit_page_write()

[Sasha Levin]

From: Wenjie Qi <qwjhust@gmail.com>

[ Upstream commit c2034ef6192a65a986a45c2aa2ed05824fdc0e9f ]

BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
 this code before "skip:" to make sure it's done for each fio.

Fixes: e067dc3c6b9c ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index cd9f1c6039c49..d71683039b961 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1080,10 +1080,6 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 	io->last_block_in_bio = fio->new_blkaddr;
 
 	trace_f2fs_submit_page_write(fio->page, fio);
-skip:
-	if (fio->in_list)
-		goto next;
-out:
 #ifdef CONFIG_BLK_DEV_ZONED
 	if (f2fs_sb_has_blkzoned(sbi) && btype < META &&
 			is_end_zone_blkaddr(sbi, fio->new_blkaddr)) {
@@ -1096,6 +1092,10 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
 		__submit_merged_bio(io);
 	}
 #endif
+skip:
+	if (fio->in_list)
+		goto next;
+out:
 	if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) ||
 				!f2fs_is_checkpoint_ready(sbi))
 		__submit_merged_bio(io);
-- 
2.43.0

[PATCH 6.7 578/713] f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 2f9420d3a94aeebd92db88f00f4f2f1a3bd3f6cf ]

- f2fs_disable_compressed_file
  - check inode_has_data
					- f2fs_file_mmap
					- mkwrite
					 - f2fs_get_block_locked
					 : update metadata in compressed
					   inode's disk layout
  - fi->i_flags &= ~F2FS_COMPR_FL
  - clear_inode_flag(inode, FI_COMPRESSED_FILE);

we should use i_sem lock to prevent above race case.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 2401d91ebc25a..3bd67d4fcb1d4 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4399,15 +4399,24 @@ static inline bool f2fs_disable_compressed_file(struct inode *inode)
 {
 	struct f2fs_inode_info *fi = F2FS_I(inode);
 
-	if (!f2fs_compressed_file(inode))
+	f2fs_down_write(&F2FS_I(inode)->i_sem);
+
+	if (!f2fs_compressed_file(inode)) {
+		f2fs_up_write(&F2FS_I(inode)->i_sem);
 		return true;
-	if (S_ISREG(inode->i_mode) && F2FS_HAS_BLOCKS(inode))
+	}
+	if (f2fs_is_mmap_file(inode) ||
+		(S_ISREG(inode->i_mode) && F2FS_HAS_BLOCKS(inode))) {
+		f2fs_up_write(&F2FS_I(inode)->i_sem);
 		return false;
+	}
 
 	fi->i_flags &= ~F2FS_COMPR_FL;
 	stat_dec_compr_inode(inode);
 	clear_inode_flag(inode, FI_COMPRESSED_FILE);
 	f2fs_mark_inode_dirty_sync(inode, true);
+
+	f2fs_up_write(&F2FS_I(inode)->i_sem);
 	return true;
 }
 
-- 
2.43.0

[PATCH 6.7 579/713] f2fs: fix to avoid potential panic during recovery

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 21ec68234826b1b54ab980a8df6e33c74cfbee58 ]

During recovery, if FAULT_BLOCK is on, it is possible that
f2fs_reserve_new_block() will return -ENOSPC during recovery,
then it may trigger panic.

Also, if fault injection rate is 1 and only FAULT_BLOCK fault
type is on, it may encounter deadloop in loop of block reservation.

Let's change as below to fix these issues:
- remove bug_on() to avoid panic.
- limit the loop count of block reservation to avoid potential
deadloop.

Fixes: 956fa1ddc132 ("f2fs: fix to check return value of f2fs_reserve_new_block()")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h     |  5 +++++
 fs/f2fs/recovery.c | 33 ++++++++++++++++-----------------
 2 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 3bd67d4fcb1d4..007f39ff99b20 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -75,6 +75,11 @@ struct f2fs_fault_info {
 
 extern const char *f2fs_fault_name[FAULT_MAX];
 #define IS_FAULT_SET(fi, type) ((fi)->inject_type & BIT(type))
+
+/* maximum retry count for injected failure */
+#define DEFAULT_FAILURE_RETRY_COUNT		8
+#else
+#define DEFAULT_FAILURE_RETRY_COUNT		1
 #endif
 
 /*
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index d0f24ccbd1ac6..aad1d1a9b3d64 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -611,6 +611,19 @@ static int check_index_in_prev_nodes(struct f2fs_sb_info *sbi,
 	return 0;
 }
 
+static int f2fs_reserve_new_block_retry(struct dnode_of_data *dn)
+{
+	int i, err = 0;
+
+	for (i = DEFAULT_FAILURE_RETRY_COUNT; i > 0; i--) {
+		err = f2fs_reserve_new_block(dn);
+		if (!err)
+			break;
+	}
+
+	return err;
+}
+
 static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 					struct page *page)
 {
@@ -712,14 +725,8 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 		 */
 		if (dest == NEW_ADDR) {
 			f2fs_truncate_data_blocks_range(&dn, 1);
-			do {
-				err = f2fs_reserve_new_block(&dn);
-				if (err == -ENOSPC) {
-					f2fs_bug_on(sbi, 1);
-					break;
-				}
-			} while (err &&
-				IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION));
+
+			err = f2fs_reserve_new_block_retry(&dn);
 			if (err)
 				goto err;
 			continue;
@@ -727,16 +734,8 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 
 		/* dest is valid block, try to recover from src to dest */
 		if (f2fs_is_valid_blkaddr(sbi, dest, META_POR)) {
-
 			if (src == NULL_ADDR) {
-				do {
-					err = f2fs_reserve_new_block(&dn);
-					if (err == -ENOSPC) {
-						f2fs_bug_on(sbi, 1);
-						break;
-					}
-				} while (err &&
-					IS_ENABLED(CONFIG_F2FS_FAULT_INJECTION));
+				err = f2fs_reserve_new_block_retry(&dn);
 				if (err)
 					goto err;
 			}
-- 
2.43.0

[PATCH 6.7 580/713] scsi: csiostor: Avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9f3dbcb5632d6876226031d552ef6163bb3ad215 ]

csiostor uses function pointer casts to keep the csio_ln_ev state machine
hidden, but this causes warnings about control flow integrity (KCFI)
violations in clang-16 and higher:

drivers/scsi/csiostor/csio_lnode.c:1098:33: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1098 |         return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1369:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1369 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1373:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1373 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1377:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1377 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Move the enum into a shared header so the correct types can be used without
the need for casts.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100518.457623-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_defs.h  | 18 ++++++++++++++++--
 drivers/scsi/csiostor/csio_lnode.c |  8 ++++----
 drivers/scsi/csiostor/csio_lnode.h | 13 -------------
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_defs.h b/drivers/scsi/csiostor/csio_defs.h
index c38017b4af982..e50e93e7fe5a1 100644
--- a/drivers/scsi/csiostor/csio_defs.h
+++ b/drivers/scsi/csiostor/csio_defs.h
@@ -73,7 +73,21 @@ csio_list_deleted(struct list_head *list)
 #define csio_list_prev(elem)	(((struct list_head *)(elem))->prev)
 
 /* State machine */
-typedef void (*csio_sm_state_t)(void *, uint32_t);
+struct csio_lnode;
+
+/* State machine evets */
+enum csio_ln_ev {
+	CSIO_LNE_NONE = (uint32_t)0,
+	CSIO_LNE_LINKUP,
+	CSIO_LNE_FAB_INIT_DONE,
+	CSIO_LNE_LINK_DOWN,
+	CSIO_LNE_DOWN_LINK,
+	CSIO_LNE_LOGO,
+	CSIO_LNE_CLOSE,
+	CSIO_LNE_MAX_EVENT,
+};
+
+typedef void (*csio_sm_state_t)(struct csio_lnode *ln, enum csio_ln_ev evt);
 
 struct csio_sm {
 	struct list_head	sm_list;
@@ -83,7 +97,7 @@ struct csio_sm {
 static inline void
 csio_set_state(void *smp, void *state)
 {
-	((struct csio_sm *)smp)->sm_state = (csio_sm_state_t)state;
+	((struct csio_sm *)smp)->sm_state = state;
 }
 
 static inline void
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index d5ac938970232..5b3ffefae476d 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -1095,7 +1095,7 @@ csio_handle_link_down(struct csio_hw *hw, uint8_t portid, uint32_t fcfi,
 int
 csio_is_lnode_ready(struct csio_lnode *ln)
 {
-	return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
+	return (csio_get_state(ln) == csio_lns_ready);
 }
 
 /*****************************************************************************/
@@ -1366,15 +1366,15 @@ csio_free_fcfinfo(struct kref *kref)
 void
 csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str)
 {
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
+	if (csio_get_state(ln) == csio_lns_uninit) {
 		strcpy(str, "UNINIT");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
+	if (csio_get_state(ln) == csio_lns_ready) {
 		strcpy(str, "READY");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
+	if (csio_get_state(ln) == csio_lns_offline) {
 		strcpy(str, "OFFLINE");
 		return;
 	}
diff --git a/drivers/scsi/csiostor/csio_lnode.h b/drivers/scsi/csiostor/csio_lnode.h
index 372a67d122d38..607698a0f0631 100644
--- a/drivers/scsi/csiostor/csio_lnode.h
+++ b/drivers/scsi/csiostor/csio_lnode.h
@@ -53,19 +53,6 @@
 extern int csio_fcoe_rnodes;
 extern int csio_fdmi_enable;
 
-/* State machine evets */
-enum csio_ln_ev {
-	CSIO_LNE_NONE = (uint32_t)0,
-	CSIO_LNE_LINKUP,
-	CSIO_LNE_FAB_INIT_DONE,
-	CSIO_LNE_LINK_DOWN,
-	CSIO_LNE_DOWN_LINK,
-	CSIO_LNE_LOGO,
-	CSIO_LNE_CLOSE,
-	CSIO_LNE_MAX_EVENT,
-};
-
-
 struct csio_fcf_info {
 	struct list_head	list;
 	uint8_t			priority;
-- 
2.43.0

[PATCH 6.7 581/713] i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling

[Sasha Levin]

From: Dylan Hung <dylan_hung@aspeedtech.com>

[ Upstream commit 10201396ef6455a68ac671fa0163205d327ebb70 ]

Disable IBI IRQ signal and status only when hot-join and SIR enabling of
all target devices attached to the bus are disabled.

Fixes: e389b1d72a62 ("i3c: dw: Add support for in-band interrupts")

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20240119054547.983693-1-dylan_hung@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/dw-i3c-master.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index ef5751e91cc9e..276153e10f5a4 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -1163,8 +1163,10 @@ static void dw_i3c_master_set_sir_enabled(struct dw_i3c_master *master,
 		global = reg == 0xffffffff;
 		reg &= ~BIT(idx);
 	} else {
-		global = reg == 0;
+		bool hj_rejected = !!(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_HOT_JOIN_NACK);
+
 		reg |= BIT(idx);
+		global = (reg == 0xffffffff) && hj_rejected;
 	}
 	writel(reg, master->regs + IBI_SIR_REQ_REJECT);
 
-- 
2.43.0

[PATCH 6.7 582/713] RDMA/hns: Fix mis-modifying default congestion control algorithm

[Sasha Levin]

From: Luoyouming <luoyouming@huawei.com>

[ Upstream commit d20a7cf9f714f0763efb56f0f2eeca1cb91315ed ]

Commit 27c5fd271d8b ("RDMA/hns: The UD mode can only be configured
with DCQCN") adds a check of congest control alorithm for UD. But
that patch causes a problem: hr_dev->caps.congest_type is global,
used by all QPs, so modifying this field to DCQCN for UD QPs causes
other QPs unable to use any other algorithm except DCQCN.

Revert the modification in commit 27c5fd271d8b ("RDMA/hns: The UD
mode can only be configured with DCQCN"). Add a new field cong_type
to struct hns_roce_qp and configure DCQCN for UD QPs.

Fixes: 27c5fd271d8b ("RDMA/hns: The UD mode can only be configured with DCQCN")
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240219061805.668170-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_device.h | 17 +++++++++--------
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 16 ++++++++++------
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index 1627f3b0ef28b..f08417d3721dc 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -584,6 +584,13 @@ struct hns_roce_work {
 	u32 queue_num;
 };
 
+enum hns_roce_cong_type {
+	CONG_TYPE_DCQCN,
+	CONG_TYPE_LDCP,
+	CONG_TYPE_HC3,
+	CONG_TYPE_DIP,
+};
+
 struct hns_roce_qp {
 	struct ib_qp		ibqp;
 	struct hns_roce_wq	rq;
@@ -627,6 +634,7 @@ struct hns_roce_qp {
 	struct list_head	sq_node; /* all send qps are on a list */
 	struct hns_user_mmap_entry *dwqe_mmap_entry;
 	u32			config;
+	enum hns_roce_cong_type	cong_type;
 };
 
 struct hns_roce_ib_iboe {
@@ -698,13 +706,6 @@ struct hns_roce_eq_table {
 	struct hns_roce_eq	*eq;
 };
 
-enum cong_type {
-	CONG_TYPE_DCQCN,
-	CONG_TYPE_LDCP,
-	CONG_TYPE_HC3,
-	CONG_TYPE_DIP,
-};
-
 struct hns_roce_caps {
 	u64		fw_ver;
 	u8		num_ports;
@@ -834,7 +835,7 @@ struct hns_roce_caps {
 	u16		default_aeq_period;
 	u16		default_aeq_arm_st;
 	u16		default_ceq_arm_st;
-	enum cong_type	cong_type;
+	enum hns_roce_cong_type cong_type;
 };
 
 enum hns_roce_device_state {
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index aa9527ac2fe06..81d6d4331cdd6 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4733,12 +4733,15 @@ static int check_cong_type(struct ib_qp *ibqp,
 			   struct hns_roce_congestion_algorithm *cong_alg)
 {
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibqp->device);
+	struct hns_roce_qp *hr_qp = to_hr_qp(ibqp);
 
-	if (ibqp->qp_type == IB_QPT_UD)
-		hr_dev->caps.cong_type = CONG_TYPE_DCQCN;
+	if (ibqp->qp_type == IB_QPT_UD || ibqp->qp_type == IB_QPT_GSI)
+		hr_qp->cong_type = CONG_TYPE_DCQCN;
+	else
+		hr_qp->cong_type = hr_dev->caps.cong_type;
 
 	/* different congestion types match different configurations */
-	switch (hr_dev->caps.cong_type) {
+	switch (hr_qp->cong_type) {
 	case CONG_TYPE_DCQCN:
 		cong_alg->alg_sel = CONG_DCQCN;
 		cong_alg->alg_sub_sel = UNSUPPORT_CONG_LEVEL;
@@ -4766,8 +4769,8 @@ static int check_cong_type(struct ib_qp *ibqp,
 	default:
 		ibdev_warn(&hr_dev->ib_dev,
 			   "invalid type(%u) for congestion selection.\n",
-			   hr_dev->caps.cong_type);
-		hr_dev->caps.cong_type = CONG_TYPE_DCQCN;
+			   hr_qp->cong_type);
+		hr_qp->cong_type = CONG_TYPE_DCQCN;
 		cong_alg->alg_sel = CONG_DCQCN;
 		cong_alg->alg_sub_sel = UNSUPPORT_CONG_LEVEL;
 		cong_alg->dip_vld = DIP_INVALID;
@@ -4786,6 +4789,7 @@ static int fill_cong_field(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 	struct hns_roce_congestion_algorithm cong_field;
 	struct ib_device *ibdev = ibqp->device;
 	struct hns_roce_dev *hr_dev = to_hr_dev(ibdev);
+	struct hns_roce_qp *hr_qp = to_hr_qp(ibqp);
 	u32 dip_idx = 0;
 	int ret;
 
@@ -4798,7 +4802,7 @@ static int fill_cong_field(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 		return ret;
 
 	hr_reg_write(context, QPC_CONG_ALGO_TMPL_ID, hr_dev->cong_algo_tmpl_id +
-		     hr_dev->caps.cong_type * HNS_ROCE_CONG_SIZE);
+		     hr_qp->cong_type * HNS_ROCE_CONG_SIZE);
 	hr_reg_clear(qpc_mask, QPC_CONG_ALGO_TMPL_ID);
 	hr_reg_write(&context->ext, QPCEX_CONG_ALG_SEL, cong_field.alg_sel);
 	hr_reg_clear(&qpc_mask->ext, QPCEX_CONG_ALG_SEL);
-- 
2.43.0

[PATCH 6.7 583/713] RDMA/device: Fix a race between mad_client and cm_client init

[Sasha Levin]

From: Shifeng Li <lishifeng@sangfor.com.cn>

[ Upstream commit 7a8bccd8b29c321ac181369b42b04fecf05f98e2 ]

The mad_client will be initialized in enable_device_and_get(), while the
devices_rwsem will be downgraded to a read semaphore. There is a window
that leads to the failed initialization for cm_client, since it can not
get matched mad port from ib_mad_port_list, and the matched mad port will
be added to the list after that.

    mad_client    |                       cm_client
------------------|--------------------------------------------------------
ib_register_device|
enable_device_and_get
down_write(&devices_rwsem)
xa_set_mark(&devices, DEVICE_REGISTERED)
downgrade_write(&devices_rwsem)
                  |
                  |ib_cm_init
                  |ib_register_client(&cm_client)
                  |down_read(&devices_rwsem)
                  |xa_for_each_marked (&devices, DEVICE_REGISTERED)
                  |add_client_context
                  |cm_add_one
                  |ib_register_mad_agent
                  |ib_get_mad_port
                  |__ib_get_mad_port
                  |list_for_each_entry(entry, &ib_mad_port_list, port_list)
                  |return NULL
                  |up_read(&devices_rwsem)
                  |
add_client_context|
ib_mad_init_device|
ib_mad_port_open  |
list_add_tail(&port_priv->port_list, &ib_mad_port_list)
up_read(&devices_rwsem)
                  |

Fix it by using down_write(&devices_rwsem) in ib_register_client().

Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/20240203035313.98991-1-lishifeng@sangfor.com.cn
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/device.c | 37 +++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 67bcea7a153c6..07cb6c5ffda00 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1730,7 +1730,7 @@ static int assign_client_id(struct ib_client *client)
 {
 	int ret;
 
-	down_write(&clients_rwsem);
+	lockdep_assert_held(&clients_rwsem);
 	/*
 	 * The add/remove callbacks must be called in FIFO/LIFO order. To
 	 * achieve this we assign client_ids so they are sorted in
@@ -1739,14 +1739,11 @@ static int assign_client_id(struct ib_client *client)
 	client->client_id = highest_client_id;
 	ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL);
 	if (ret)
-		goto out;
+		return ret;
 
 	highest_client_id++;
 	xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED);
-
-out:
-	up_write(&clients_rwsem);
-	return ret;
+	return 0;
 }
 
 static void remove_client_id(struct ib_client *client)
@@ -1776,25 +1773,35 @@ int ib_register_client(struct ib_client *client)
 {
 	struct ib_device *device;
 	unsigned long index;
+	bool need_unreg = false;
 	int ret;
 
 	refcount_set(&client->uses, 1);
 	init_completion(&client->uses_zero);
+
+	/*
+	 * The devices_rwsem is held in write mode to ensure that a racing
+	 * ib_register_device() sees a consisent view of clients and devices.
+	 */
+	down_write(&devices_rwsem);
+	down_write(&clients_rwsem);
 	ret = assign_client_id(client);
 	if (ret)
-		return ret;
+		goto out;
 
-	down_read(&devices_rwsem);
+	need_unreg = true;
 	xa_for_each_marked (&devices, index, device, DEVICE_REGISTERED) {
 		ret = add_client_context(device, client);
-		if (ret) {
-			up_read(&devices_rwsem);
-			ib_unregister_client(client);
-			return ret;
-		}
+		if (ret)
+			goto out;
 	}
-	up_read(&devices_rwsem);
-	return 0;
+	ret = 0;
+out:
+	up_write(&clients_rwsem);
+	up_write(&devices_rwsem);
+	if (need_unreg && ret)
+		ib_unregister_client(client);
+	return ret;
 }
 EXPORT_SYMBOL(ib_register_client);
 
-- 
2.43.0

[PATCH 6.7 584/713] RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()

[Sasha Levin]

From: Alexey Kodanev <aleksei.kodanev@bell-sw.com>

[ Upstream commit 7a7b7f575a25aa68ee934ee8107294487efcb3fe ]

strnlen() may return 0 (e.g. for "\0\n" string), it's better to
check the result of strnlen() before using 'len - 1' expression
for the 'buf' array index.

Detected using the static analysis tool - Svace.

Fixes: dc3b66a0ce70 ("RDMA/rtrs-clt: Add a minimum latency multipath policy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Link: https://lore.kernel.org/r/20240221113204.147478-1-aleksei.kodanev@bell-sw.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c b/drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c
index d3c436ead6946..4aa80c9388f05 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c
@@ -133,7 +133,7 @@ static ssize_t mpath_policy_store(struct device *dev,
 
 	/* distinguish "mi" and "min-latency" with length */
 	len = strnlen(buf, NAME_MAX);
-	if (buf[len - 1] == '\n')
+	if (len && buf[len - 1] == '\n')
 		len--;
 
 	if (!strncasecmp(buf, "round-robin", 11) ||
-- 
2.43.0

[PATCH 6.7 585/713] scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit b69600231f751304db914c63b937f7098ed2895c ]

Some callback functions used here take a boolean argument, others take a
status argument. This breaks KCFI type checking, so clang now warns about
the function pointer cast:

drivers/scsi/bfa/bfad_bsg.c:2138:29: error: cast from 'void (*)(void *, enum bfa_status)' to 'bfa_cb_cbfn_t' (aka 'void (*)(void *, enum bfa_boolean)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Assuming the code is actually correct here and the callers always match the
argument types of the callee, rework this to replace the explicit cast with
a union of the two pointer types. This does not change the behavior of the
code, so if something is actually broken here, a larger rework may be
necessary.

Fixes: 37ea0558b87a ("[SCSI] bfa: Added support to collect and reset fcport stats")
Fixes: 3ec4f2c8bff2 ("[SCSI] bfa: Added support to configure QOS and collect stats.")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240222124433.2046570-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bfa/bfa.h      |  9 ++++++++-
 drivers/scsi/bfa/bfa_core.c |  4 +---
 drivers/scsi/bfa/bfa_ioc.h  |  8 ++++++--
 drivers/scsi/bfa/bfad_bsg.c | 11 ++++-------
 4 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index 7bd2ba1ad4d11..f30fe324e6ecc 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -20,7 +20,6 @@
 struct bfa_s;
 
 typedef void (*bfa_isr_func_t) (struct bfa_s *bfa, struct bfi_msg_s *m);
-typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Interrupt message handlers
@@ -437,4 +436,12 @@ struct bfa_cb_pending_q_s {
 	(__qe)->data = (__data);				\
 } while (0)
 
+#define bfa_pending_q_init_status(__qe, __cbfn, __cbarg, __data) do {	\
+	bfa_q_qe_init(&((__qe)->hcb_qe.qe));			\
+	(__qe)->hcb_qe.cbfn_status = (__cbfn);			\
+	(__qe)->hcb_qe.cbarg = (__cbarg);			\
+	(__qe)->hcb_qe.pre_rmv = BFA_TRUE;			\
+	(__qe)->data = (__data);				\
+} while (0)
+
 #endif /* __BFA_H__ */
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 6846ca8f7313c..3438d0b8ba062 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -1907,15 +1907,13 @@ bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
 	struct list_head		*qe;
 	struct list_head		*qen;
 	struct bfa_cb_qe_s	*hcb_qe;
-	bfa_cb_cbfn_status_t	cbfn;
 
 	list_for_each_safe(qe, qen, comp_q) {
 		hcb_qe = (struct bfa_cb_qe_s *) qe;
 		if (hcb_qe->pre_rmv) {
 			/* qe is invalid after return, dequeue before cbfn() */
 			list_del(qe);
-			cbfn = (bfa_cb_cbfn_status_t)(hcb_qe->cbfn);
-			cbfn(hcb_qe->cbarg, hcb_qe->fw_status);
+			hcb_qe->cbfn_status(hcb_qe->cbarg, hcb_qe->fw_status);
 		} else
 			hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
 	}
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 933a1c3890ff5..5e568d6d7b261 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -361,14 +361,18 @@ struct bfa_reqq_wait_s {
 	void	*cbarg;
 };
 
-typedef void	(*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Generic BFA callback element.
  */
 struct bfa_cb_qe_s {
 	struct list_head	qe;
-	bfa_cb_cbfn_t	cbfn;
+	union {
+		bfa_cb_cbfn_status_t	cbfn_status;
+		bfa_cb_cbfn_t		cbfn;
+	};
 	bfa_boolean_t	once;
 	bfa_boolean_t	pre_rmv;	/* set for stack based qe(s) */
 	bfa_status_t	fw_status;	/* to access fw status in comp proc */
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index d4ceca2d435ee..54bd11e6d5933 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -2135,8 +2135,7 @@ bfad_iocmd_fcport_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_get_stats(&bfad->bfa, &cb_qe);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -2159,7 +2158,7 @@ bfad_iocmd_fcport_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp, &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_clear_stats(&bfad->bfa, &cb_qe);
@@ -2443,8 +2442,7 @@ bfad_iocmd_qos_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
@@ -2474,8 +2472,7 @@ bfad_iocmd_qos_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
-- 
2.43.0

[PATCH 6.7 586/713] f2fs: fix to create selinux label during whiteout initialization

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 40b2d55e045222dd6de2a54a299f682e0f954b03 ]

#generic/700       - output mismatch (see /media/fstests/results//generic/700.out.bad)
#    --- tests/generic/700.out	2023-03-28 10:40:42.735529223 +0000
#    +++ /media/fstests/results//generic/700.out.bad	2024-02-06 04:37:56.000000000 +0000
#    @@ -1,2 +1,4 @@
#     QA output created by 700
#    +/mnt/scratch_f2fs/f1: security.selinux: No such attribute
#    +/mnt/scratch_f2fs/f2: security.selinux: No such attribute
#     Silence is golden
#    ...
#    (Run 'diff -u /media/fstests/tests/generic/700.out /media/fstests/results//generic/700.out.bad'  to see the entire diff)

HINT: You _MAY_ be missing kernel fix:
      70b589a37e1a xfs: add selinux labels to whiteout inodes

Previously, it missed to create selinux labels during whiteout inode
initialization, fix this issue.

Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/dir.c   |  5 +++--
 fs/f2fs/f2fs.h  |  3 ++-
 fs/f2fs/namei.c | 25 +++++++++++++++++--------
 3 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index 042593aed1ec0..1b937f7d0414f 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -830,13 +830,14 @@ int f2fs_do_add_link(struct inode *dir, const struct qstr *name,
 	return err;
 }
 
-int f2fs_do_tmpfile(struct inode *inode, struct inode *dir)
+int f2fs_do_tmpfile(struct inode *inode, struct inode *dir,
+					struct f2fs_filename *fname)
 {
 	struct page *page;
 	int err = 0;
 
 	f2fs_down_write(&F2FS_I(inode)->i_sem);
-	page = f2fs_init_inode_metadata(inode, dir, NULL, NULL);
+	page = f2fs_init_inode_metadata(inode, dir, fname, NULL);
 	if (IS_ERR(page)) {
 		err = PTR_ERR(page);
 		goto fail;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 007f39ff99b20..655e27e7bef9c 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3572,7 +3572,8 @@ int f2fs_do_add_link(struct inode *dir, const struct qstr *name,
 			struct inode *inode, nid_t ino, umode_t mode);
 void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
 			struct inode *dir, struct inode *inode);
-int f2fs_do_tmpfile(struct inode *inode, struct inode *dir);
+int f2fs_do_tmpfile(struct inode *inode, struct inode *dir,
+					struct f2fs_filename *fname);
 bool f2fs_empty_dir(struct inode *dir);
 
 static inline int f2fs_add_link(struct dentry *dentry, struct inode *inode)
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 7f71bae2c83b5..9cdf3f36d1b90 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -853,7 +853,7 @@ static int f2fs_mknod(struct mnt_idmap *idmap, struct inode *dir,
 
 static int __f2fs_tmpfile(struct mnt_idmap *idmap, struct inode *dir,
 			  struct file *file, umode_t mode, bool is_whiteout,
-			  struct inode **new_inode)
+			  struct inode **new_inode, struct f2fs_filename *fname)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
 	struct inode *inode;
@@ -881,7 +881,7 @@ static int __f2fs_tmpfile(struct mnt_idmap *idmap, struct inode *dir,
 	if (err)
 		goto out;
 
-	err = f2fs_do_tmpfile(inode, dir);
+	err = f2fs_do_tmpfile(inode, dir, fname);
 	if (err)
 		goto release_out;
 
@@ -932,22 +932,24 @@ static int f2fs_tmpfile(struct mnt_idmap *idmap, struct inode *dir,
 	if (!f2fs_is_checkpoint_ready(sbi))
 		return -ENOSPC;
 
-	err = __f2fs_tmpfile(idmap, dir, file, mode, false, NULL);
+	err = __f2fs_tmpfile(idmap, dir, file, mode, false, NULL, NULL);
 
 	return finish_open_simple(file, err);
 }
 
 static int f2fs_create_whiteout(struct mnt_idmap *idmap,
-				struct inode *dir, struct inode **whiteout)
+				struct inode *dir, struct inode **whiteout,
+				struct f2fs_filename *fname)
 {
-	return __f2fs_tmpfile(idmap, dir, NULL,
-				S_IFCHR | WHITEOUT_MODE, true, whiteout);
+	return __f2fs_tmpfile(idmap, dir, NULL, S_IFCHR | WHITEOUT_MODE,
+						true, whiteout, fname);
 }
 
 int f2fs_get_tmpfile(struct mnt_idmap *idmap, struct inode *dir,
 		     struct inode **new_inode)
 {
-	return __f2fs_tmpfile(idmap, dir, NULL, S_IFREG, false, new_inode);
+	return __f2fs_tmpfile(idmap, dir, NULL, S_IFREG,
+				false, new_inode, NULL);
 }
 
 static int f2fs_rename(struct mnt_idmap *idmap, struct inode *old_dir,
@@ -990,7 +992,14 @@ static int f2fs_rename(struct mnt_idmap *idmap, struct inode *old_dir,
 	}
 
 	if (flags & RENAME_WHITEOUT) {
-		err = f2fs_create_whiteout(idmap, old_dir, &whiteout);
+		struct f2fs_filename fname;
+
+		err = f2fs_setup_filename(old_dir, &old_dentry->d_name,
+							0, &fname);
+		if (err)
+			return err;
+
+		err = f2fs_create_whiteout(idmap, old_dir, &whiteout, &fname);
 		if (err)
 			return err;
 	}
-- 
2.43.0

[PATCH 6.7 587/713] f2fs: compress: fix to check zstd compress level correctly in mount option

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit e39602da752cd1d0462e3fa04074146f6f2803f6 ]

f2fs only support to config zstd compress level w/ a positive number due
to layout design, but since commit e0c1b49f5b67 ("lib: zstd: Upgrade to
latest upstream zstd version 1.4.10"), zstd supports negative compress
level, so that zstd_min_clevel() may return a negative number, then w/
below mount option, .compress_level can be configed w/ a negative number,
which is not allowed to f2fs, let's add check condition to avoid it.

mount -o compress_algorithm=zstd:4294967295 /dev/sdx /mnt/f2fs

Fixes: 00e120b5e4b5 ("f2fs: assign default compression level")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index b0d6a643c9ef1..655cfadc92457 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -663,7 +663,7 @@ static int f2fs_set_lz4hc_level(struct f2fs_sb_info *sbi, const char *str)
 #ifdef CONFIG_F2FS_FS_ZSTD
 static int f2fs_set_zstd_level(struct f2fs_sb_info *sbi, const char *str)
 {
-	unsigned int level;
+	int level;
 	int len = 4;
 
 	if (strlen(str) == len) {
@@ -677,9 +677,15 @@ static int f2fs_set_zstd_level(struct f2fs_sb_info *sbi, const char *str)
 		f2fs_info(sbi, "wrong format, e.g. <alg_name>:<compr_level>");
 		return -EINVAL;
 	}
-	if (kstrtouint(str + 1, 10, &level))
+	if (kstrtoint(str + 1, 10, &level))
 		return -EINVAL;
 
+	/* f2fs does not support negative compress level now */
+	if (level < 0) {
+		f2fs_info(sbi, "do not support negative compress level: %d", level);
+		return -ERANGE;
+	}
+
 	if (!f2fs_is_compress_level_valid(COMPRESS_ZSTD, level)) {
 		f2fs_info(sbi, "invalid zstd compress level: %d", level);
 		return -EINVAL;
-- 
2.43.0

[PATCH 6.7 588/713] net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d6f4de70f73a106986ee315d7d512539f2f3303a ]

The intent is to check if the strings' are truncated or not. So, >= should
be used instead of >, because strlcat() and snprintf() return the length of
the output, excluding the trailing NULL.

Fixes: a02d69261134 ("SUNRPC: Provide functions for managing universal addresses")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/addr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
index d435bffc61999..97ff11973c493 100644
--- a/net/sunrpc/addr.c
+++ b/net/sunrpc/addr.c
@@ -284,10 +284,10 @@ char *rpc_sockaddr2uaddr(const struct sockaddr *sap, gfp_t gfp_flags)
 	}
 
 	if (snprintf(portbuf, sizeof(portbuf),
-		     ".%u.%u", port >> 8, port & 0xff) > (int)sizeof(portbuf))
+		     ".%u.%u", port >> 8, port & 0xff) >= (int)sizeof(portbuf))
 		return NULL;
 
-	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) > sizeof(addrbuf))
+	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) >= sizeof(addrbuf))
 		return NULL;
 
 	return kstrdup(addrbuf, gfp_flags);
-- 
2.43.0

[PATCH 6.7 589/713] NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102

[Sasha Levin]

From: Jorge Mora <jmora1300@gmail.com>

[ Upstream commit 251a658bbfceafb4d58c76b77682c8bf7bcfad65 ]

A call to listxattr() with a buffer size = 0 returns the actual
size of the buffer needed for a subsequent call. When size > 0,
nfs4_listxattr() does not return an error because either
generic_listxattr() or nfs4_listxattr_nfs4_label() consumes
exactly all the bytes then size is 0 when calling
nfs4_listxattr_nfs4_user() which then triggers the following
kernel BUG:

  [   99.403778] kernel BUG at mm/usercopy.c:102!
  [   99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
  [   99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1
  [   99.415827] Call trace:
  [   99.415985]  usercopy_abort+0x70/0xa0
  [   99.416227]  __check_heap_object+0x134/0x158
  [   99.416505]  check_heap_object+0x150/0x188
  [   99.416696]  __check_object_size.part.0+0x78/0x168
  [   99.416886]  __check_object_size+0x28/0x40
  [   99.417078]  listxattr+0x8c/0x120
  [   99.417252]  path_listxattr+0x78/0xe0
  [   99.417476]  __arm64_sys_listxattr+0x28/0x40
  [   99.417723]  invoke_syscall+0x78/0x100
  [   99.417929]  el0_svc_common.constprop.0+0x48/0xf0
  [   99.418186]  do_el0_svc+0x24/0x38
  [   99.418376]  el0_svc+0x3c/0x110
  [   99.418554]  el0t_64_sync_handler+0x120/0x130
  [   99.418788]  el0t_64_sync+0x194/0x198
  [   99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000)

Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl',
thus calling lisxattr() with size = 16 will trigger the bug.

Add check on nfs4_listxattr() to return ERANGE error when it is
called with size > 0 and the return value is greater than size.

Fixes: 012a211abd5d ("NFSv4.2: hook in the user extended attribute handlers")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 23819a7565085..b2ff8c7a21494 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -10615,29 +10615,33 @@ const struct nfs4_minor_version_ops *nfs_v4_minor_ops[] = {
 static ssize_t nfs4_listxattr(struct dentry *dentry, char *list, size_t size)
 {
 	ssize_t error, error2, error3;
+	size_t left = size;
 
-	error = generic_listxattr(dentry, list, size);
+	error = generic_listxattr(dentry, list, left);
 	if (error < 0)
 		return error;
 	if (list) {
 		list += error;
-		size -= error;
+		left -= error;
 	}
 
-	error2 = nfs4_listxattr_nfs4_label(d_inode(dentry), list, size);
+	error2 = nfs4_listxattr_nfs4_label(d_inode(dentry), list, left);
 	if (error2 < 0)
 		return error2;
 
 	if (list) {
 		list += error2;
-		size -= error2;
+		left -= error2;
 	}
 
-	error3 = nfs4_listxattr_nfs4_user(d_inode(dentry), list, size);
+	error3 = nfs4_listxattr_nfs4_user(d_inode(dentry), list, left);
 	if (error3 < 0)
 		return error3;
 
-	return error + error2 + error3;
+	error += error2 + error3;
+	if (size && error > size)
+		return -ERANGE;
+	return error;
 }
 
 static void nfs4_enable_swap(struct inode *inode)
-- 
2.43.0

[PATCH 6.7 590/713] NFSv4.2: fix listxattr maximum XDR buffer size

[Sasha Levin]

From: Jorge Mora <jmora1300@gmail.com>

[ Upstream commit bcac8bff90a6ee1629f90669cdb9d28fb86049b0 ]

Switch order of operations to avoid creating a short XDR buffer:
e.g., buflen = 12, old xdrlen = 12, new xdrlen = 20.

Having a short XDR buffer leads to lxa_maxcount be a few bytes
less than what is needed to retrieve the whole list when using
a buflen as returned by a call with size = 0:
    buflen = listxattr(path, NULL, 0);
    buf = malloc(buflen);
    buflen = listxattr(path, buf, buflen);

For a file with one attribute (name = '123456'), the first call
with size = 0 will return buflen = 12 ('user.123456\x00').
The second call with size = 12, sends LISTXATTRS with
lxa_maxcount = 12 + 8 (cookie) + 4 (array count) = 24. The
XDR buffer needs 8 (cookie) + 4 (array count) + 4 (name count)
+ 6 (name len) + 2 (padding) + 4 (eof) = 28 which is 4 bytes
shorter than the lxa_maxcount provided in the call.

Fixes: 04a5da690e8f ("NFSv4.2: define limits and sizes for user xattr handling")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs42.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs42.h b/fs/nfs/nfs42.h
index b59876b01a1e3..0282d93c8bccb 100644
--- a/fs/nfs/nfs42.h
+++ b/fs/nfs/nfs42.h
@@ -55,11 +55,14 @@ int nfs42_proc_removexattr(struct inode *inode, const char *name);
  * They would be 7 bytes long in the eventual buffer ("user.x\0"), and
  * 8 bytes long XDR-encoded.
  *
- * Include the trailing eof word as well.
+ * Include the trailing eof word as well and make the result a multiple
+ * of 4 bytes.
  */
 static inline u32 nfs42_listxattr_xdrsize(u32 buflen)
 {
-	return ((buflen / (XATTR_USER_PREFIX_LEN + 2)) * 8) + 4;
+	u32 size = 8 * buflen / (XATTR_USER_PREFIX_LEN + 2) + 4;
+
+	return (size + 3) & ~3;
 }
 #endif /* CONFIG_NFS_V4_2 */
 #endif /* __LINUX_FS_NFS_NFS4_2_H */
-- 
2.43.0

[PATCH 6.7 591/713] f2fs: compress: fix to check compress flag w/ .i_sem lock

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit ea59b12ac69774c08aa95cd5b6100700ea0cce97 ]

It needs to check compress flag w/ .i_sem lock, otherwise, compressed
inode may be disabled after the check condition, it's not needed to
set compress option on non-compress inode.

Fixes: e1e8debec656 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 762b664ef38b2..a82dc1af16797 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3989,16 +3989,20 @@ static int f2fs_ioc_set_compress_option(struct file *filp, unsigned long arg)
 				sizeof(option)))
 		return -EFAULT;
 
-	if (!f2fs_compressed_file(inode) ||
-			option.log_cluster_size < MIN_COMPRESS_LOG_SIZE ||
-			option.log_cluster_size > MAX_COMPRESS_LOG_SIZE ||
-			option.algorithm >= COMPRESS_MAX)
+	if (option.log_cluster_size < MIN_COMPRESS_LOG_SIZE ||
+		option.log_cluster_size > MAX_COMPRESS_LOG_SIZE ||
+		option.algorithm >= COMPRESS_MAX)
 		return -EINVAL;
 
 	file_start_write(filp);
 	inode_lock(inode);
 
 	f2fs_down_write(&F2FS_I(inode)->i_sem);
+	if (!f2fs_compressed_file(inode)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	if (f2fs_is_mmap_file(inode) || get_dirty_pages(inode)) {
 		ret = -EBUSY;
 		goto out;
-- 
2.43.0

[PATCH 6.7 592/713] f2fs: check number of blocks in a current section

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 7af2df0f67a1469762e59be3726a803882d83f6f ]

In cfd66bb715fd ("f2fs: fix deadloop in foreground GC"), we needed to check
the number of blocks in a section instead of the segment.

Fixes: cfd66bb715fd ("f2fs: fix deadloop in foreground GC")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 8129be788bd56..c77a562831493 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -573,23 +573,22 @@ static inline bool has_curseg_enough_space(struct f2fs_sb_info *sbi,
 			unsigned int node_blocks, unsigned int dent_blocks)
 {
 
-	unsigned int segno, left_blocks;
+	unsigned segno, left_blocks;
 	int i;
 
-	/* check current node segment */
+	/* check current node sections in the worst case. */
 	for (i = CURSEG_HOT_NODE; i <= CURSEG_COLD_NODE; i++) {
 		segno = CURSEG_I(sbi, i)->segno;
-		left_blocks = f2fs_usable_blks_in_seg(sbi, segno) -
-				get_seg_entry(sbi, segno)->ckpt_valid_blocks;
-
+		left_blocks = CAP_BLKS_PER_SEC(sbi) -
+				get_ckpt_valid_blocks(sbi, segno, true);
 		if (node_blocks > left_blocks)
 			return false;
 	}
 
-	/* check current data segment */
+	/* check current data section for dentry blocks. */
 	segno = CURSEG_I(sbi, CURSEG_HOT_DATA)->segno;
-	left_blocks = f2fs_usable_blks_in_seg(sbi, segno) -
-			get_seg_entry(sbi, segno)->ckpt_valid_blocks;
+	left_blocks = CAP_BLKS_PER_SEC(sbi) -
+			get_ckpt_valid_blocks(sbi, segno, true);
 	if (dent_blocks > left_blocks)
 		return false;
 	return true;
@@ -638,7 +637,7 @@ static inline bool has_not_enough_free_secs(struct f2fs_sb_info *sbi,
 
 	if (free_secs > upper_secs)
 		return false;
-	else if (free_secs <= lower_secs)
+	if (free_secs <= lower_secs)
 		return true;
 	return !curseg_space;
 }
-- 
2.43.0

[PATCH 6.7 593/713] watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter

[Sasha Levin]

From: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>

[ Upstream commit 8bc22a2f1bf0f402029087fcb53130233a544fed ]

In the probe function, pm_runtime_put_sync() will fail on platform with
runtime PM disabled.
Check if runtime PM is enabled before calling pm_runtime_put_sync() to
fix it.

Fixes: db728ea9c7be ("drivers: watchdog: Add StarFive Watchdog driver")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240119082722.1133024-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/starfive-wdt.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
index 49b38ecc092dd..e4b344db38030 100644
--- a/drivers/watchdog/starfive-wdt.c
+++ b/drivers/watchdog/starfive-wdt.c
@@ -494,8 +494,13 @@ static int starfive_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_exit;
 
-	if (!early_enable)
-		pm_runtime_put_sync(&pdev->dev);
+	if (!early_enable) {
+		if (pm_runtime_enabled(&pdev->dev)) {
+			ret = pm_runtime_put_sync(&pdev->dev);
+			if (ret)
+				goto err_exit;
+		}
+	}
 
 	return 0;
 
-- 
2.43.0

[PATCH 6.7 594/713] watchdog: stm32_iwdg: initialize default timeout

[Sasha Levin]

From: Ben Wolsieffer <ben.wolsieffer@hefring.com>

[ Upstream commit dbd7c0088b7f44aa0b9276ed3449df075a7b5b54 ]

The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.

This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.

This has been tested on an STM32F746.

Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/stm32_iwdg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index d9fd50df9802c..5404e03876202 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -20,6 +20,8 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
+#define DEFAULT_TIMEOUT 10
+
 /* IWDG registers */
 #define IWDG_KR		0x00 /* Key register */
 #define IWDG_PR		0x04 /* Prescaler Register */
@@ -248,6 +250,7 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	wdd->parent = dev;
 	wdd->info = &stm32_iwdg_info;
 	wdd->ops = &stm32_iwdg_ops;
+	wdd->timeout = DEFAULT_TIMEOUT;
 	wdd->min_timeout = DIV_ROUND_UP((RLR_MIN + 1) * PR_MIN, wdt->rate);
 	wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
 				    1000) / wdt->rate;
-- 
2.43.0

[PATCH 6.7 595/713] f2fs: fix to use correct segment type in f2fs_allocate_data_block()

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 7324858237829733dec9c670170df2377c5ca6e2 ]

@type in f2fs_allocate_data_block() indicates log header's type, it
can be CURSEG_COLD_DATA_PINNED or CURSEG_ALL_DATA_ATGC, rather than
type of data/node, however IS_DATASEG()/IS_NODESEG() only accept later
one, fix it.

Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index cb49b2d15c59d..7b7ed2dac16b8 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3490,12 +3490,12 @@ void f2fs_allocate_data_block(struct f2fs_sb_info *sbi, struct page *page,
 	locate_dirty_segment(sbi, GET_SEGNO(sbi, old_blkaddr));
 	locate_dirty_segment(sbi, GET_SEGNO(sbi, *new_blkaddr));
 
-	if (IS_DATASEG(type))
+	if (IS_DATASEG(curseg->seg_type))
 		atomic64_inc(&sbi->allocated_data_blocks);
 
 	up_write(&sit_i->sentry_lock);
 
-	if (page && IS_NODESEG(type)) {
+	if (page && IS_NODESEG(curseg->seg_type)) {
 		fill_node_footer_blkaddr(page, NEXT_FREE_BLKADDR(sbi, curseg));
 
 		f2fs_inode_chksum_set(sbi, page);
-- 
2.43.0

[PATCH 6.7 596/713] f2fs: ro: compress: fix to avoid caching unaligned extent

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 4b99ecd304290c4ef55666a62c89dfb2dbf0b2cd ]

Mapping info from dump.f2fs:
i_addr[0x2d] cluster flag    		[0xfffffffe : 4294967294]
i_addr[0x2e]                 		[0x   10428 : 66600]
i_addr[0x2f]                 		[0x   10429 : 66601]
i_addr[0x30]                 		[0x   1042a : 66602]

f2fs_io fiemap 37 1 /mnt/f2fs/disk-58390c8c.raw

Previsouly, it missed to align fofs and ofs_in_node to cluster_size,
result in adding incorrect read extent cache, fix it.

Before:
f2fs_update_read_extent_tree_range: dev = (253,48), ino = 5, pgofs = 37, len = 4, blkaddr = 66600, c_len = 3

After:
f2fs_update_read_extent_tree_range: dev = (253,48), ino = 5, pgofs = 36, len = 4, blkaddr = 66600, c_len = 3

Fixes: 94afd6d6e525 ("f2fs: extent cache: support unaligned extent")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/compress.c | 10 ++++++----
 fs/f2fs/f2fs.h     |  6 ++++--
 fs/f2fs/node.c     | 20 ++++++++++++++------
 3 files changed, 24 insertions(+), 12 deletions(-)

diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 06e9bbfba1f1a..52f407b9789b1 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1817,16 +1817,18 @@ void f2fs_put_page_dic(struct page *page, bool in_task)
  * check whether cluster blocks are contiguous, and add extent cache entry
  * only if cluster blocks are logically and physically contiguous.
  */
-unsigned int f2fs_cluster_blocks_are_contiguous(struct dnode_of_data *dn)
+unsigned int f2fs_cluster_blocks_are_contiguous(struct dnode_of_data *dn,
+						unsigned int ofs_in_node)
 {
-	bool compressed = f2fs_data_blkaddr(dn) == COMPRESS_ADDR;
+	bool compressed = data_blkaddr(dn->inode, dn->node_page,
+					ofs_in_node) == COMPRESS_ADDR;
 	int i = compressed ? 1 : 0;
 	block_t first_blkaddr = data_blkaddr(dn->inode, dn->node_page,
-						dn->ofs_in_node + i);
+							ofs_in_node + i);
 
 	for (i += 1; i < F2FS_I(dn->inode)->i_cluster_size; i++) {
 		block_t blkaddr = data_blkaddr(dn->inode, dn->node_page,
-						dn->ofs_in_node + i);
+							ofs_in_node + i);
 
 		if (!__is_valid_data_blkaddr(blkaddr))
 			break;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 655e27e7bef9c..bdae73e2540a5 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4291,7 +4291,8 @@ struct decompress_io_ctx *f2fs_alloc_dic(struct compress_ctx *cc);
 void f2fs_decompress_end_io(struct decompress_io_ctx *dic, bool failed,
 				bool in_task);
 void f2fs_put_page_dic(struct page *page, bool in_task);
-unsigned int f2fs_cluster_blocks_are_contiguous(struct dnode_of_data *dn);
+unsigned int f2fs_cluster_blocks_are_contiguous(struct dnode_of_data *dn,
+						unsigned int ofs_in_node);
 int f2fs_init_compress_ctx(struct compress_ctx *cc);
 void f2fs_destroy_compress_ctx(struct compress_ctx *cc, bool reuse);
 void f2fs_init_compress_info(struct f2fs_sb_info *sbi);
@@ -4348,7 +4349,8 @@ static inline void f2fs_put_page_dic(struct page *page, bool in_task)
 {
 	WARN_ON_ONCE(1);
 }
-static inline unsigned int f2fs_cluster_blocks_are_contiguous(struct dnode_of_data *dn) { return 0; }
+static inline unsigned int f2fs_cluster_blocks_are_contiguous(
+			struct dnode_of_data *dn, unsigned int ofs_in_node) { return 0; }
 static inline bool f2fs_sanity_check_cluster(struct dnode_of_data *dn) { return false; }
 static inline int f2fs_init_compress_inode(struct f2fs_sb_info *sbi) { return 0; }
 static inline void f2fs_destroy_compress_inode(struct f2fs_sb_info *sbi) { }
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 9b546fd210100..2ea9c99e7dcb7 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -852,21 +852,29 @@ int f2fs_get_dnode_of_data(struct dnode_of_data *dn, pgoff_t index, int mode)
 
 	if (is_inode_flag_set(dn->inode, FI_COMPRESSED_FILE) &&
 					f2fs_sb_has_readonly(sbi)) {
-		unsigned int c_len = f2fs_cluster_blocks_are_contiguous(dn);
+		unsigned int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
+		unsigned int ofs_in_node = dn->ofs_in_node;
+		pgoff_t fofs = index;
+		unsigned int c_len;
 		block_t blkaddr;
 
+		/* should align fofs and ofs_in_node to cluster_size */
+		if (fofs % cluster_size) {
+			fofs = round_down(fofs, cluster_size);
+			ofs_in_node = round_down(ofs_in_node, cluster_size);
+		}
+
+		c_len = f2fs_cluster_blocks_are_contiguous(dn, ofs_in_node);
 		if (!c_len)
 			goto out;
 
-		blkaddr = f2fs_data_blkaddr(dn);
+		blkaddr = data_blkaddr(dn->inode, dn->node_page, ofs_in_node);
 		if (blkaddr == COMPRESS_ADDR)
 			blkaddr = data_blkaddr(dn->inode, dn->node_page,
-						dn->ofs_in_node + 1);
+						ofs_in_node + 1);
 
 		f2fs_update_read_extent_tree_range_compressed(dn->inode,
-					index, blkaddr,
-					F2FS_I(dn->inode)->i_cluster_size,
-					c_len);
+					fofs, blkaddr, cluster_size, c_len);
 	}
 out:
 	return 0;
-- 
2.43.0

[PATCH 6.7 597/713] RDMA/mana_ib: Fix bug in creation of dma regions

[Sasha Levin]

From: Konstantin Taranov <kotaranov@microsoft.com>

[ Upstream commit e02497fb654689049ba8b46f098f17d5f19e0b3c ]

Use ib_umem_dma_offset() helper to calculate correct dma offset.

Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1709560361-26393-2-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mana/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mana/main.c b/drivers/infiniband/hw/mana/main.c
index 7be4c3adb4e2b..ab91009aea883 100644
--- a/drivers/infiniband/hw/mana/main.c
+++ b/drivers/infiniband/hw/mana/main.c
@@ -358,7 +358,7 @@ int mana_ib_gd_create_dma_region(struct mana_ib_dev *dev, struct ib_umem *umem,
 			     sizeof(struct gdma_create_dma_region_resp));
 
 	create_req->length = umem->length;
-	create_req->offset_in_page = umem->address & (page_sz - 1);
+	create_req->offset_in_page = ib_umem_dma_offset(umem, page_sz);
 	create_req->gdma_page_type = order_base_2(page_sz) - PAGE_SHIFT;
 	create_req->page_count = num_pages_total;
 
-- 
2.43.0

[PATCH 6.7 598/713] Input: iqs7222 - add support for IQS7222D v1.1 and v1.2

[Sasha Levin]

From: Jeff LaBundy <jeff@labundy.com>

[ Upstream commit 992cf65674778e22436807796b2df927de21bb75 ]

The vendor has introduced two new revisions with slightly different
memory maps; update the driver to support them.

Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZelTRYX3fenMQuhF@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/iqs7222.c | 112 +++++++++++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c
index 36aeeae776110..9ca5a743f19fe 100644
--- a/drivers/input/misc/iqs7222.c
+++ b/drivers/input/misc/iqs7222.c
@@ -620,6 +620,118 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = {
 			},
 		},
 	},
+	{
+		.prod_num = IQS7222_PROD_NUM_D,
+		.fw_major = 1,
+		.fw_minor = 2,
+		.touch_link = 1770,
+		.allow_offset = 9,
+		.event_offset = 10,
+		.comms_offset = 11,
+		.reg_grps = {
+			[IQS7222_REG_GRP_STAT] = {
+				.base = IQS7222_SYS_STATUS,
+				.num_row = 1,
+				.num_col = 7,
+			},
+			[IQS7222_REG_GRP_CYCLE] = {
+				.base = 0x8000,
+				.num_row = 7,
+				.num_col = 2,
+			},
+			[IQS7222_REG_GRP_GLBL] = {
+				.base = 0x8700,
+				.num_row = 1,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_BTN] = {
+				.base = 0x9000,
+				.num_row = 14,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_CHAN] = {
+				.base = 0xA000,
+				.num_row = 14,
+				.num_col = 4,
+			},
+			[IQS7222_REG_GRP_FILT] = {
+				.base = 0xAE00,
+				.num_row = 1,
+				.num_col = 2,
+			},
+			[IQS7222_REG_GRP_TPAD] = {
+				.base = 0xB000,
+				.num_row = 1,
+				.num_col = 24,
+			},
+			[IQS7222_REG_GRP_GPIO] = {
+				.base = 0xC000,
+				.num_row = 3,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_SYS] = {
+				.base = IQS7222_SYS_SETUP,
+				.num_row = 1,
+				.num_col = 12,
+			},
+		},
+	},
+	{
+		.prod_num = IQS7222_PROD_NUM_D,
+		.fw_major = 1,
+		.fw_minor = 1,
+		.touch_link = 1774,
+		.allow_offset = 9,
+		.event_offset = 10,
+		.comms_offset = 11,
+		.reg_grps = {
+			[IQS7222_REG_GRP_STAT] = {
+				.base = IQS7222_SYS_STATUS,
+				.num_row = 1,
+				.num_col = 7,
+			},
+			[IQS7222_REG_GRP_CYCLE] = {
+				.base = 0x8000,
+				.num_row = 7,
+				.num_col = 2,
+			},
+			[IQS7222_REG_GRP_GLBL] = {
+				.base = 0x8700,
+				.num_row = 1,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_BTN] = {
+				.base = 0x9000,
+				.num_row = 14,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_CHAN] = {
+				.base = 0xA000,
+				.num_row = 14,
+				.num_col = 4,
+			},
+			[IQS7222_REG_GRP_FILT] = {
+				.base = 0xAE00,
+				.num_row = 1,
+				.num_col = 2,
+			},
+			[IQS7222_REG_GRP_TPAD] = {
+				.base = 0xB000,
+				.num_row = 1,
+				.num_col = 24,
+			},
+			[IQS7222_REG_GRP_GPIO] = {
+				.base = 0xC000,
+				.num_row = 3,
+				.num_col = 3,
+			},
+			[IQS7222_REG_GRP_SYS] = {
+				.base = IQS7222_SYS_SETUP,
+				.num_row = 1,
+				.num_col = 12,
+			},
+		},
+	},
 	{
 		.prod_num = IQS7222_PROD_NUM_D,
 		.fw_major = 0,
-- 
2.43.0

[PATCH 6.7 599/713] NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt

[Sasha Levin]

From: Dave Wysochanski <dwysocha@redhat.com>

[ Upstream commit fd5860ab6341506004219b080aea40213b299d2e ]

The loop inside nfs_netfs_issue_read() currently does not disable
interrupts while iterating through pages in the xarray to submit
for NFS read.  This is not safe though since after taking xa_lock,
another page in the mapping could be processed for writeback inside
an interrupt, and deadlock can occur.  The fix is simple and clean
if we use xa_for_each_range(), which handles the iteration with RCU
while reducing code complexity.

The problem is easily reproduced with the following test:
 mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs
 dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1
 echo 3 > /proc/sys/vm/drop_caches
 dd if=/mnt/nfs/file1.bin of=/dev/null
 umount /mnt/nfs

On the console with a lockdep-enabled kernel a message similar to
the following will be seen:

 ================================
 WARNING: inconsistent lock state
 6.7.0-lockdbg+ #10 Not tainted
 --------------------------------
 inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
 test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes:
 ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at:
nfs_netfs_issue_read+0x1b2/0x4b0 [nfs]
 {IN-SOFTIRQ-W} state was registered at:
   lock_acquire+0x144/0x380
   _raw_spin_lock_irqsave+0x4e/0xa0
   __folio_end_writeback+0x17e/0x5c0
   folio_end_writeback+0x93/0x1b0
   iomap_finish_ioend+0xeb/0x6a0
   blk_update_request+0x204/0x7f0
   blk_mq_end_request+0x30/0x1c0
   blk_complete_reqs+0x7e/0xa0
   __do_softirq+0x113/0x544
   __irq_exit_rcu+0xfe/0x120
   irq_exit_rcu+0xe/0x20
   sysvec_call_function_single+0x6f/0x90
   asm_sysvec_call_function_single+0x1a/0x20
   pv_native_safe_halt+0xf/0x20
   default_idle+0x9/0x20
   default_idle_call+0x67/0xa0
   do_idle+0x2b5/0x300
   cpu_startup_entry+0x34/0x40
   start_secondary+0x19d/0x1c0
   secondary_startup_64_no_verify+0x18f/0x19b
 irq event stamp: 176891
 hardirqs last  enabled at (176891): [<ffffffffa67a0be4>]
_raw_spin_unlock_irqrestore+0x44/0x60
 hardirqs last disabled at (176890): [<ffffffffa67a0899>]
_raw_spin_lock_irqsave+0x79/0xa0
 softirqs last  enabled at (176646): [<ffffffffa515d91e>]
__irq_exit_rcu+0xfe/0x120
 softirqs last disabled at (176633): [<ffffffffa515d91e>]
__irq_exit_rcu+0xfe/0x120

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&xa->xa_lock#4);
   <Interrupt>
     lock(&xa->xa_lock#4);

  *** DEADLOCK ***

 2 locks held by test5/1708:
  #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at:
      nfs_start_io_read+0x28/0x90 [nfs]
  #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at:
      page_cache_ra_unbounded+0xa4/0x280

 stack backtrace:
 CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
 Call Trace:
  dump_stack_lvl+0x5b/0x90
  mark_lock+0xb3f/0xd20
  __lock_acquire+0x77b/0x3360
  _raw_spin_lock+0x34/0x80
  nfs_netfs_issue_read+0x1b2/0x4b0 [nfs]
  netfs_begin_read+0x77f/0x980 [netfs]
  nfs_netfs_readahead+0x45/0x60 [nfs]
  nfs_readahead+0x323/0x5a0 [nfs]
  read_pages+0xf3/0x5c0
  page_cache_ra_unbounded+0x1c8/0x280
  filemap_get_pages+0x38c/0xae0
  filemap_read+0x206/0x5e0
  nfs_file_read+0xb7/0x140 [nfs]
  vfs_read+0x2a9/0x460
  ksys_read+0xb7/0x140

Fixes: 000dbe0bec05 ("NFS: Convert buffered read paths to use netfs when fscache is enabled")
Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/fscache.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index b05717fe0d4e4..60a3c28784e0b 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -307,11 +307,11 @@ static void nfs_netfs_issue_read(struct netfs_io_subrequest *sreq)
 	struct inode *inode = sreq->rreq->inode;
 	struct nfs_open_context *ctx = sreq->rreq->netfs_priv;
 	struct page *page;
+	unsigned long idx;
 	int err;
 	pgoff_t start = (sreq->start + sreq->transferred) >> PAGE_SHIFT;
 	pgoff_t last = ((sreq->start + sreq->len -
 			 sreq->transferred - 1) >> PAGE_SHIFT);
-	XA_STATE(xas, &sreq->rreq->mapping->i_pages, start);
 
 	nfs_pageio_init_read(&pgio, inode, false,
 			     &nfs_async_read_completion_ops);
@@ -322,19 +322,14 @@ static void nfs_netfs_issue_read(struct netfs_io_subrequest *sreq)
 
 	pgio.pg_netfs = netfs; /* used in completion */
 
-	xas_lock(&xas);
-	xas_for_each(&xas, page, last) {
+	xa_for_each_range(&sreq->rreq->mapping->i_pages, idx, page, start, last) {
 		/* nfs_read_add_folio() may schedule() due to pNFS layout and other RPCs  */
-		xas_pause(&xas);
-		xas_unlock(&xas);
 		err = nfs_read_add_folio(&pgio, ctx, page_folio(page));
 		if (err < 0) {
 			netfs->error = err;
 			goto out;
 		}
-		xas_lock(&xas);
 	}
-	xas_unlock(&xas);
 out:
 	nfs_pageio_complete_read(&pgio);
 	nfs_netfs_put(netfs);
-- 
2.43.0

[PATCH 6.7 600/713] NFS: Fix an off by one in root_nfs_cat()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 698ad1a538da0b6bf969cfee630b4e3a026afb87 ]

The intent is to check if 'dest' is truncated or not. So, >= should be
used instead of >, because strlcat() returns the length of 'dest' and 'src'
excluding the trailing NULL.

Fixes: 56463e50d1fc ("NFS: Use super.c for NFSROOT mount option parsing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfsroot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 7600100ba26f0..432612d224374 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -175,10 +175,10 @@ static int __init root_nfs_cat(char *dest, const char *src,
 	size_t len = strlen(dest);
 
 	if (len && dest[len - 1] != ',')
-		if (strlcat(dest, ",", destlen) > destlen)
+		if (strlcat(dest, ",", destlen) >= destlen)
 			return -1;
 
-	if (strlcat(dest, src, destlen) > destlen)
+	if (strlcat(dest, src, destlen) >= destlen)
 		return -1;
 	return 0;
 }
-- 
2.43.0

[PATCH 6.7 601/713] NFSv4.1/pnfs: fix NFS with TLS in pnfs

[Sasha Levin]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit a35518cae4b325632840bc8c3aa9ad9bac430038 ]

Currently, even though xprtsec=tls is specified and used for operations
to MDS, any operations that go to DS travel over unencrypted connection.
Or additionally, if more than 1 DS can serve the data, then trunked
connections are also done unencrypted.

IN GETDEVINCEINFO, we get an entry for the DS which carries a protocol
type (which is TCP), then nfs4_set_ds_client() gets called with TCP
instead of TCP with TLS.

Currently, each trunked connection is created and uses clp->cl_hostname
value which if TLS is used would get passed up in the handshake upcall,
but instead we need to pass in the appropriate trunked address value.

Fixes: c8407f2e560c ("NFS: Add an "xprtsec=" NFS mount option")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pnfs_nfs.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index afd23910f3bff..88e061bd711b7 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -919,6 +919,8 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
 	dprintk("--> %s DS %s\n", __func__, ds->ds_remotestr);
 
 	list_for_each_entry(da, &ds->ds_addrs, da_node) {
+		char servername[48];
+
 		dprintk("%s: DS %s: trying address %s\n",
 			__func__, ds->ds_remotestr, da->da_remotestr);
 
@@ -929,6 +931,7 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
 				.dstaddr = (struct sockaddr *)&da->da_addr,
 				.addrlen = da->da_addrlen,
 				.servername = clp->cl_hostname,
+				.xprtsec = clp->cl_xprtsec,
 			};
 			struct nfs4_add_xprt_data xprtdata = {
 				.clp = clp,
@@ -938,10 +941,45 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
 				.data = &xprtdata,
 			};
 
-			if (da->da_transport != clp->cl_proto)
+			if (da->da_transport != clp->cl_proto &&
+					clp->cl_proto != XPRT_TRANSPORT_TCP_TLS)
 				continue;
+			if (da->da_transport == XPRT_TRANSPORT_TCP &&
+				mds_srv->nfs_client->cl_proto ==
+					XPRT_TRANSPORT_TCP_TLS) {
+				struct sockaddr *addr =
+					(struct sockaddr *)&da->da_addr;
+				struct sockaddr_in *sin =
+					(struct sockaddr_in *)&da->da_addr;
+				struct sockaddr_in6 *sin6 =
+					(struct sockaddr_in6 *)&da->da_addr;
+
+				/* for NFS with TLS we need to supply a correct
+				 * servername of the trunked transport, not the
+				 * servername of the main transport stored in
+				 * clp->cl_hostname. And set the protocol to
+				 * indicate to use TLS
+				 */
+				servername[0] = '\0';
+				switch(addr->sa_family) {
+				case AF_INET:
+					snprintf(servername, sizeof(servername),
+						"%pI4", &sin->sin_addr.s_addr);
+					break;
+				case AF_INET6:
+					snprintf(servername, sizeof(servername),
+						"%pI6", &sin6->sin6_addr);
+					break;
+				default:
+					/* do not consider this address */
+					continue;
+				}
+				xprt_args.ident = XPRT_TRANSPORT_TCP_TLS;
+				xprt_args.servername = servername;
+			}
 			if (da->da_addr.ss_family != clp->cl_addr.ss_family)
 				continue;
+
 			/**
 			* Test this address for session trunking and
 			* add as an alias
@@ -953,6 +991,10 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
 			if (xprtdata.cred)
 				put_cred(xprtdata.cred);
 		} else {
+			if (da->da_transport == XPRT_TRANSPORT_TCP &&
+				mds_srv->nfs_client->cl_proto ==
+					XPRT_TRANSPORT_TCP_TLS)
+				da->da_transport = XPRT_TRANSPORT_TCP_TLS;
 			clp = nfs4_set_ds_client(mds_srv,
 						&da->da_addr,
 						da->da_addrlen,
-- 
2.43.0

[PATCH 6.7 602/713] f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks

[Sasha Levin]

From: Xiuhong Wang <xiuhong.wang@unisoc.com>

[ Upstream commit b7d797d241c154d73ec5523f87f3b06d4f299da1 ]

The following f2fs_io test will get a "0" result instead of -EINVAL,
unisoc # ./f2fs_io compress file
unisoc # ./f2fs_io reserve_cblocks file
 0
it's not reasonable, so the judgement of
atomic_read(&F2FS_I(inode)->i_compr_blocks) should be placed after
the judgement of is_inode_flag_set(inode, FI_COMPRESS_RELEASED).

Fixes: c75488fb4d82 ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index a82dc1af16797..f44c29a6bc24b 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3679,9 +3679,6 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 	if (ret)
 		return ret;
 
-	if (atomic_read(&F2FS_I(inode)->i_compr_blocks))
-		goto out;
-
 	f2fs_balance_fs(sbi, true);
 
 	inode_lock(inode);
@@ -3691,6 +3688,9 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 		goto unlock_inode;
 	}
 
+	if (atomic_read(&F2FS_I(inode)->i_compr_blocks))
+		goto unlock_inode;
+
 	f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
 	filemap_invalidate_lock(inode->i_mapping);
 
@@ -3737,7 +3737,6 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 	}
 unlock_inode:
 	inode_unlock(inode);
-out:
 	mnt_drop_write_file(filp);
 
 	if (ret >= 0) {
-- 
2.43.0

[PATCH 6.7 603/713] f2fs: compress: fix reserve_cblocks counting error when out of space

[Sasha Levin]

From: Xiuhong Wang <xiuhong.wang@unisoc.com>

[ Upstream commit 2f6d721e14b69d6e1251f69fa238b48e8374e25f ]

When a file only needs one direct_node, performing the following
operations will cause the file to be unrepairable:

unisoc # ./f2fs_io compress test.apk
unisoc #df -h | grep dm-48
/dev/block/dm-48 112G 112G 1.2M 100% /data

unisoc # ./f2fs_io release_cblocks test.apk
924
unisoc # df -h | grep dm-48
/dev/block/dm-48 112G 112G 4.8M 100% /data

unisoc # dd if=/dev/random of=file4 bs=1M count=3
3145728 bytes (3.0 M) copied, 0.025 s, 120 M/s
unisoc # df -h | grep dm-48
/dev/block/dm-48 112G 112G 1.8M 100% /data

unisoc # ./f2fs_io reserve_cblocks test.apk
F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device

adb reboot
unisoc # df -h  | grep dm-48
/dev/block/dm-48             112G 112G   11M 100% /data
unisoc # ./f2fs_io reserve_cblocks test.apk
0

This is because the file has only one direct_node. After returning
to -ENOSPC, reserved_blocks += ret will not be executed. As a result,
the reserved_blocks at this time is still 0, which is not the real
number of reserved blocks. Therefore, fsck cannot be set to repair
the file.

After this patch, the fsck flag will be set to fix this problem.

unisoc # df -h | grep dm-48
/dev/block/dm-48             112G 112G  1.8M 100% /data
unisoc # ./f2fs_io reserve_cblocks test.apk
F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device

adb reboot then fsck will be executed
unisoc # df -h  | grep dm-48
/dev/block/dm-48             112G 112G   11M 100% /data
unisoc # ./f2fs_io reserve_cblocks test.apk
924

Fixes: c75488fb4d82 ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index f44c29a6bc24b..caeae900f797a 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3583,10 +3583,10 @@ static int f2fs_release_compress_blocks(struct file *filp, unsigned long arg)
 	return ret;
 }
 
-static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
+static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count,
+		unsigned int *reserved_blocks)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
-	unsigned int reserved_blocks = 0;
 	int cluster_size = F2FS_I(dn->inode)->i_cluster_size;
 	block_t blkaddr;
 	int i;
@@ -3650,12 +3650,12 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 
 		f2fs_i_compr_blocks_update(dn->inode, compr_blocks, true);
 
-		reserved_blocks += reserved;
+		*reserved_blocks += reserved;
 next:
 		count -= cluster_size;
 	}
 
-	return reserved_blocks;
+	return 0;
 }
 
 static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
@@ -3716,7 +3716,7 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 		count = min(end_offset - dn.ofs_in_node, last_idx - page_idx);
 		count = round_up(count, F2FS_I(inode)->i_cluster_size);
 
-		ret = reserve_compress_blocks(&dn, count);
+		ret = reserve_compress_blocks(&dn, count, &reserved_blocks);
 
 		f2fs_put_dnode(&dn);
 
@@ -3724,13 +3724,12 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 			break;
 
 		page_idx += count;
-		reserved_blocks += ret;
 	}
 
 	filemap_invalidate_unlock(inode->i_mapping);
 	f2fs_up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
 
-	if (ret >= 0) {
+	if (!ret) {
 		clear_inode_flag(inode, FI_COMPRESS_RELEASED);
 		inode_set_ctime_current(inode);
 		f2fs_mark_inode_dirty_sync(inode, true);
@@ -3739,7 +3738,7 @@ static int f2fs_reserve_compress_blocks(struct file *filp, unsigned long arg)
 	inode_unlock(inode);
 	mnt_drop_write_file(filp);
 
-	if (ret >= 0) {
+	if (!ret) {
 		ret = put_user(reserved_blocks, (u64 __user *)arg);
 	} else if (reserved_blocks &&
 			atomic_read(&F2FS_I(inode)->i_compr_blocks)) {
-- 
2.43.0

[PATCH 6.7 604/713] f2fs: introduce f2fs_invalidate_internal_cache() for cleanup

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 4e4f1eb9949b10cb7d76370fd27d41f20ef2b32b ]

Just cleanup, no logic changes.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 9f0c4a46be1f ("f2fs: fix to truncate meta inode pages forcely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c    |  8 +++-----
 fs/f2fs/f2fs.h    |  7 +++++++
 fs/f2fs/gc.c      |  5 ++---
 fs/f2fs/segment.c | 14 ++++----------
 4 files changed, 16 insertions(+), 18 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index d71683039b961..c611d064aee3e 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1485,11 +1485,9 @@ static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
 	old_blkaddr = dn->data_blkaddr;
 	f2fs_allocate_data_block(sbi, NULL, old_blkaddr, &dn->data_blkaddr,
 				&sum, seg_type, NULL);
-	if (GET_SEGNO(sbi, old_blkaddr) != NULL_SEGNO) {
-		invalidate_mapping_pages(META_MAPPING(sbi),
-					old_blkaddr, old_blkaddr);
-		f2fs_invalidate_compress_page(sbi, old_blkaddr);
-	}
+	if (GET_SEGNO(sbi, old_blkaddr) != NULL_SEGNO)
+		f2fs_invalidate_internal_cache(sbi, old_blkaddr);
+
 	f2fs_update_data_blkaddr(dn, dn->data_blkaddr);
 	return 0;
 }
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index bdae73e2540a5..67e37b3968c05 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4628,6 +4628,13 @@ static inline bool f2fs_is_readonly(struct f2fs_sb_info *sbi)
 	return f2fs_sb_has_readonly(sbi) || f2fs_readonly(sbi->sb);
 }
 
+static inline void f2fs_invalidate_internal_cache(struct f2fs_sb_info *sbi,
+								block_t blkaddr)
+{
+	invalidate_mapping_pages(META_MAPPING(sbi), blkaddr, blkaddr);
+	f2fs_invalidate_compress_page(sbi, blkaddr);
+}
+
 #define EFSBADCRC	EBADMSG		/* Bad CRC detected */
 #define EFSCORRUPTED	EUCLEAN		/* Filesystem is corrupted */
 
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 2fbe16ad726f4..405a6077bd83b 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1380,9 +1380,8 @@ static int move_data_block(struct inode *inode, block_t bidx,
 	memcpy(page_address(fio.encrypted_page),
 				page_address(mpage), PAGE_SIZE);
 	f2fs_put_page(mpage, 1);
-	invalidate_mapping_pages(META_MAPPING(fio.sbi),
-				fio.old_blkaddr, fio.old_blkaddr);
-	f2fs_invalidate_compress_page(fio.sbi, fio.old_blkaddr);
+
+	f2fs_invalidate_internal_cache(fio.sbi, fio.old_blkaddr);
 
 	set_page_dirty(fio.encrypted_page);
 	if (clear_page_dirty_for_io(fio.encrypted_page))
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 7b7ed2dac16b8..4dde164254ec2 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2495,8 +2495,7 @@ void f2fs_invalidate_blocks(struct f2fs_sb_info *sbi, block_t addr)
 	if (addr == NEW_ADDR || addr == COMPRESS_ADDR)
 		return;
 
-	invalidate_mapping_pages(META_MAPPING(sbi), addr, addr);
-	f2fs_invalidate_compress_page(sbi, addr);
+	f2fs_invalidate_internal_cache(sbi, addr);
 
 	/* add it into sit main buffer */
 	down_write(&sit_i->sentry_lock);
@@ -3557,11 +3556,8 @@ static void do_write_page(struct f2fs_summary *sum, struct f2fs_io_info *fio)
 reallocate:
 	f2fs_allocate_data_block(fio->sbi, fio->page, fio->old_blkaddr,
 			&fio->new_blkaddr, sum, type, fio);
-	if (GET_SEGNO(fio->sbi, fio->old_blkaddr) != NULL_SEGNO) {
-		invalidate_mapping_pages(META_MAPPING(fio->sbi),
-					fio->old_blkaddr, fio->old_blkaddr);
-		f2fs_invalidate_compress_page(fio->sbi, fio->old_blkaddr);
-	}
+	if (GET_SEGNO(fio->sbi, fio->old_blkaddr) != NULL_SEGNO)
+		f2fs_invalidate_internal_cache(fio->sbi, fio->old_blkaddr);
 
 	/* writeout dirty page into bdev */
 	f2fs_submit_page_write(fio);
@@ -3757,9 +3753,7 @@ void f2fs_do_replace_block(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
 		update_sit_entry(sbi, new_blkaddr, 1);
 	}
 	if (GET_SEGNO(sbi, old_blkaddr) != NULL_SEGNO) {
-		invalidate_mapping_pages(META_MAPPING(sbi),
-					old_blkaddr, old_blkaddr);
-		f2fs_invalidate_compress_page(sbi, old_blkaddr);
+		f2fs_invalidate_internal_cache(sbi, old_blkaddr);
 		if (!from_gc)
 			update_segment_mtime(sbi, old_blkaddr, 0);
 		update_sit_entry(sbi, old_blkaddr, -1);
-- 
2.43.0

[PATCH 6.7 605/713] f2fs: fix to truncate meta inode pages forcely

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 9f0c4a46be1fe9b97dbe66d49204c1371e3ece65 ]

Below race case can cause data corruption:

Thread A				GC thread
					- gc_data_segment
					 - ra_data_block
					  - locked meta_inode page
- f2fs_inplace_write_data
 - invalidate_mapping_pages
 : fail to invalidate meta_inode page
   due to lock failure or dirty|writeback
   status
 - f2fs_submit_page_bio
 : write last dirty data to old blkaddr
					 - move_data_block
					  - load old data from meta_inode page
					  - f2fs_submit_page_write
					  : write old data to new blkaddr

Because invalidate_mapping_pages() will skip invalidating page which
has unclear status including locked, dirty, writeback and so on, so
we need to use truncate_inode_pages_range() instead of
invalidate_mapping_pages() to make sure meta_inode page will be dropped.

Fixes: 6aa58d8ad20a ("f2fs: readahead encrypted block during GC")
Fixes: e3b49ea36802 ("f2fs: invalidate META_MAPPING before IPU/DIO write")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c    |  5 +++--
 fs/f2fs/f2fs.h          | 28 +++++++++++++++++++++++++++-
 fs/f2fs/segment.c       |  5 ++---
 include/linux/f2fs_fs.h |  1 +
 4 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index b0597a539fc54..9afc8d24dc369 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1587,8 +1587,9 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 	 */
 	if (f2fs_sb_has_encrypt(sbi) || f2fs_sb_has_verity(sbi) ||
 		f2fs_sb_has_compression(sbi))
-		invalidate_mapping_pages(META_MAPPING(sbi),
-				MAIN_BLKADDR(sbi), MAX_BLKADDR(sbi) - 1);
+		f2fs_bug_on(sbi,
+			invalidate_inode_pages2_range(META_MAPPING(sbi),
+				MAIN_BLKADDR(sbi), MAX_BLKADDR(sbi) - 1));
 
 	f2fs_release_ino_entry(sbi, false);
 
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 67e37b3968c05..200e1e43ef9bb 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4628,10 +4628,36 @@ static inline bool f2fs_is_readonly(struct f2fs_sb_info *sbi)
 	return f2fs_sb_has_readonly(sbi) || f2fs_readonly(sbi->sb);
 }
 
+static inline void f2fs_truncate_meta_inode_pages(struct f2fs_sb_info *sbi,
+					block_t blkaddr, unsigned int cnt)
+{
+	bool need_submit = false;
+	int i = 0;
+
+	do {
+		struct page *page;
+
+		page = find_get_page(META_MAPPING(sbi), blkaddr + i);
+		if (page) {
+			if (PageWriteback(page))
+				need_submit = true;
+			f2fs_put_page(page, 0);
+		}
+	} while (++i < cnt && !need_submit);
+
+	if (need_submit)
+		f2fs_submit_merged_write_cond(sbi, sbi->meta_inode,
+							NULL, 0, DATA);
+
+	truncate_inode_pages_range(META_MAPPING(sbi),
+			F2FS_BLK_TO_BYTES((loff_t)blkaddr),
+			F2FS_BLK_END_BYTES((loff_t)(blkaddr + cnt - 1)));
+}
+
 static inline void f2fs_invalidate_internal_cache(struct f2fs_sb_info *sbi,
 								block_t blkaddr)
 {
-	invalidate_mapping_pages(META_MAPPING(sbi), blkaddr, blkaddr);
+	f2fs_truncate_meta_inode_pages(sbi, blkaddr, 1);
 	f2fs_invalidate_compress_page(sbi, blkaddr);
 }
 
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 4dde164254ec2..dfc7fd8aa1e8f 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3651,8 +3651,7 @@ int f2fs_inplace_write_data(struct f2fs_io_info *fio)
 	}
 
 	if (fio->post_read)
-		invalidate_mapping_pages(META_MAPPING(sbi),
-				fio->new_blkaddr, fio->new_blkaddr);
+		f2fs_truncate_meta_inode_pages(sbi, fio->new_blkaddr, 1);
 
 	stat_inc_inplace_blocks(fio->sbi);
 
@@ -3842,7 +3841,7 @@ void f2fs_wait_on_block_writeback_range(struct inode *inode, block_t blkaddr,
 	for (i = 0; i < len; i++)
 		f2fs_wait_on_block_writeback(inode, blkaddr + i);
 
-	invalidate_mapping_pages(META_MAPPING(sbi), blkaddr, blkaddr + len - 1);
+	f2fs_truncate_meta_inode_pages(sbi, blkaddr, len);
 }
 
 static int read_compacted_summaries(struct f2fs_sb_info *sbi)
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index 039fe0ce8d83d..1812b7ec8491a 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -27,6 +27,7 @@
 
 #define F2FS_BYTES_TO_BLK(bytes)	((bytes) >> F2FS_BLKSIZE_BITS)
 #define F2FS_BLK_TO_BYTES(blk)		((blk) << F2FS_BLKSIZE_BITS)
+#define F2FS_BLK_END_BYTES(blk)		(F2FS_BLK_TO_BYTES(blk + 1) - 1)
 
 /* 0, 1(node nid), 2(meta nid) are reserved node id */
 #define F2FS_RESERVED_NODE_NUM		3
-- 
2.43.0

[PATCH 6.7 606/713] f2fs: zone: fix to remove pow2 check condition for zoned block device

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 11bec96afbfbc4679863db55258de440d786821e ]

Commit 2e2c6e9b72ce ("f2fs: remove power-of-two limitation of zoned
device") missed to remove pow2 check condition in init_blkz_info(),
fix it.

Fixes: 2e2c6e9b72ce ("f2fs: remove power-of-two limitation of zoned device")
Signed-off-by: Feng Song <songfeng@oppo.com>
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 655cfadc92457..4151293fc4d67 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -3944,11 +3944,6 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)
 		return 0;
 
 	zone_sectors = bdev_zone_sectors(bdev);
-	if (!is_power_of_2(zone_sectors)) {
-		f2fs_err(sbi, "F2FS does not support non power of 2 zone sizes\n");
-		return -EINVAL;
-	}
-
 	if (sbi->blocks_per_blkz && sbi->blocks_per_blkz !=
 				SECTOR_TO_BLOCK(zone_sectors))
 		return -EINVAL;
-- 
2.43.0

[PATCH 6.7 607/713] perf/x86/amd/core: Avoid register reset when CPU is dead

[Sasha Levin]

From: Sandipan Das <sandipan.das@amd.com>

[ Upstream commit ad8c91282c95f801c37812d59d2d9eba6899b384 ]

When bringing a CPU online, some of the PMC and LBR related registers
are reset. The same is done when a CPU is taken offline although that
is unnecessary. This currently happens in the "cpu_dead" callback which
is also incorrect as the callback runs on a control CPU instead of the
one that is being taken offline. This also affects hibernation and
suspend to RAM on some platforms as reported in the link below.

Fixes: 21d59e3e2c40 ("perf/x86/amd/core: Detect PerfMonV2 support")
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/550a026764342cf7e5812680e3e2b91fe662b5ac.1706526029.git.sandipan.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index e24976593a298..5365d6acbf090 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -604,7 +604,6 @@ static void amd_pmu_cpu_dead(int cpu)
 
 	kfree(cpuhw->lbr_sel);
 	cpuhw->lbr_sel = NULL;
-	amd_pmu_cpu_reset(cpu);
 
 	if (!x86_pmu.amd_nb_constraints)
 		return;
-- 
2.43.0

[PATCH 6.7 608/713] afs: Revert "afs: Hide silly-rename files from userspace"

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 0aec3847d044273733285dcff90afda89ad461d2 ]

This reverts commit 57e9d49c54528c49b8bffe6d99d782ea051ea534.

This undoes the hiding of .__afsXXXX silly-rename files.  The problem with
hiding them is that rm can't then manually delete them.

This also reverts commit 5f7a07646655fb4108da527565dcdc80124b14c4 ("afs: Fix
endless loop in directory parsing") as that's a bugfix for the above.

Fixes: 57e9d49c5452 ("afs: Hide silly-rename files from userspace")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008102.html
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3085695.1710328121@warthog.procyon.org.uk
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index c097da6e9c5b2..7761f25a77f39 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -474,16 +474,6 @@ static int afs_dir_iterate_block(struct afs_vnode *dvnode,
 			continue;
 		}
 
-		/* Don't expose silly rename entries to userspace. */
-		if (nlen > 6 &&
-		    dire->u.name[0] == '.' &&
-		    ctx->actor != afs_lookup_filldir &&
-		    ctx->actor != afs_lookup_one_filldir &&
-		    memcmp(dire->u.name, ".__afs", 6) == 0) {
-			ctx->pos = blkoff + next * sizeof(union afs_xdr_dirent);
-			continue;
-		}
-
 		/* found the next entry */
 		if (!dir_emit(ctx, dire->u.name, nlen,
 			      ntohl(dire->u.vnode),
-- 
2.43.0

[PATCH 6.7 609/713] nfs: fix panic when nfs4_ff_layout_prepare_ds() fails

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 719fcafe07c12646691bd62d7f8d94d657fa0766 ]

We've been seeing the following panic in production

BUG: kernel NULL pointer dereference, address: 0000000000000065
PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0
RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
Call Trace:
 <TASK>
 ? __die+0x78/0xc0
 ? page_fault_oops+0x286/0x380
 ? __rpc_execute+0x2c3/0x470 [sunrpc]
 ? rpc_new_task+0x42/0x1c0 [sunrpc]
 ? exc_page_fault+0x5d/0x110
 ? asm_exc_page_fault+0x22/0x30
 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles]
 ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
 ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles]
 pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4]
 pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4]
 ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles]
 nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles]
 ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles]
 __nfs_pageio_add_request+0x154/0x6c0 [nfs]
 nfs_pageio_add_request+0x26b/0x380 [nfs]
 nfs_do_writepage+0x111/0x1e0 [nfs]
 nfs_writepages_callback+0xf/0x30 [nfs]
 write_cache_pages+0x17f/0x380
 ? nfs_pageio_init_write+0x50/0x50 [nfs]
 ? nfs_writepages+0x6d/0x210 [nfs]
 ? nfs_writepages+0x6d/0x210 [nfs]
 nfs_writepages+0x125/0x210 [nfs]
 do_writepages+0x67/0x220
 ? generic_perform_write+0x14b/0x210
 filemap_fdatawrite_wbc+0x5b/0x80
 file_write_and_wait_range+0x6d/0xc0
 nfs_file_fsync+0x81/0x170 [nfs]
 ? nfs_file_mmap+0x60/0x60 [nfs]
 __x64_sys_fsync+0x53/0x90
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Inspecting the core with drgn I was able to pull this

  >>> prog.crashed_thread().stack_trace()[0]
  #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27
  >>> prog.crashed_thread().stack_trace()[0]['idx']
  (u32)1
  >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds
  (struct nfs4_ff_layout_ds *)0xffffffffffffffed

This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds()
which could error out initializing the mirror_ds, and then we go to
clean it all up and our check is only for if (!mirror->mirror_ds).  This
is inconsistent with the rest of the users of mirror_ds, which have

  if (IS_ERR_OR_NULL(mirror_ds))

to keep from tripping over this exact scenario.  Fix this up in
ff_layout_cancel_io() to make sure we don't panic when we get an error.
I also spot checked all the other instances of checking mirror_ds and we
appear to be doing the correct checks everywhere, only unconditionally
dereferencing mirror_ds when we know it would be valid.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Fixes: b739a5bd9d9f ("NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index ef817a0475ffa..3e724cb7ef01d 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -2016,7 +2016,7 @@ static void ff_layout_cancel_io(struct pnfs_layout_segment *lseg)
 	for (idx = 0; idx < flseg->mirror_array_cnt; idx++) {
 		mirror = flseg->mirror_array[idx];
 		mirror_ds = mirror->mirror_ds;
-		if (!mirror_ds)
+		if (IS_ERR_OR_NULL(mirror_ds))
 			continue;
 		ds = mirror->mirror_ds->ds;
 		if (!ds)
-- 
2.43.0

[PATCH 6.7 610/713] io_uring/net: correct the type of variable

[Sasha Levin]

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

[ Upstream commit 86bcacc957fc2d0403aa0e652757eec59a5fd7ca ]

The namelen is of type int. It shouldn't be made size_t which is
unsigned. The signed number is needed for error checking before use.

Fixes: c55978024d12 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240301144349.2807544-1-usama.anjum@collabora.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/io_uring/net.c b/io_uring/net.c
index 058e04ea68c04..4aaeada03f1e7 100644
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -536,7 +536,7 @@ int io_send(struct io_kiocb *req, unsigned int issue_flags)
 
 static int io_recvmsg_mshot_prep(struct io_kiocb *req,
 				 struct io_async_msghdr *iomsg,
-				 size_t namelen, size_t controllen)
+				 int namelen, size_t controllen)
 {
 	if ((req->flags & (REQ_F_APOLL_MULTISHOT|REQ_F_BUFFER_SELECT)) ==
 			  (REQ_F_APOLL_MULTISHOT|REQ_F_BUFFER_SELECT)) {
-- 
2.43.0

[PATCH 6.7 611/713] bcachefs: Fix build on parisc by avoiding __multi3()

[Sasha Levin]

From: Helge Deller <deller@kernel.org>

commit eba38cc7578bef94865341c73608bdf49193a51d upstream.

The gcc compiler on paric does support the __int128 type, although the
architecture does not have native 128-bit support.

The effect is, that the bcachefs u128_square() function will pull in the
libgcc __multi3() helper, which breaks the kernel build when bcachefs is
built as module since this function isn't currently exported in
arch/parisc/kernel/parisc_ksyms.c.
The build failure can be seen in the latest debian kernel build at:
https://buildd.debian.org/status/fetch.php?pkg=linux&arch=hppa&ver=6.7.1-1%7Eexp1&stamp=1706132569&raw=0

We prefer to not export that symbol, so fall back to the optional 64-bit
implementation provided by bcachefs and thus avoid usage of __multi3().

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/mean_and_variance.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/bcachefs/mean_and_variance.h b/fs/bcachefs/mean_and_variance.h
index 647505010b397..056e797383fb5 100644
--- a/fs/bcachefs/mean_and_variance.h
+++ b/fs/bcachefs/mean_and_variance.h
@@ -14,7 +14,7 @@
  * type
  */
 
-#ifdef __SIZEOF_INT128__
+#if defined(__SIZEOF_INT128__) && defined(__KERNEL__) && !defined(CONFIG_PARISC)
 
 typedef struct {
 	unsigned __int128 v;
-- 
2.43.0

[PATCH 6.7 612/713] bcachefs: install fd later to avoid race with close

[Sasha Levin]

From: Mathias Krause <minipli@grsecurity.net>

commit dd839f31d7cd5e04f4111a219024268c6f6973f0 upstream.

Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.

Avoid that race by calling fd_install() later, after all the setup is
done.

Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/chardev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/bcachefs/chardev.c b/fs/bcachefs/chardev.c
index 4bb88aefed121..64000c8da5ee6 100644
--- a/fs/bcachefs/chardev.c
+++ b/fs/bcachefs/chardev.c
@@ -392,10 +392,9 @@ static long bch2_ioctl_data(struct bch_fs *c,
 		goto err;
 	}
 
-	fd_install(fd, file);
-
 	get_task_struct(ctx->thread);
 	wake_up_process(ctx->thread);
+	fd_install(fd, file);
 
 	return fd;
 err:
-- 
2.43.0

[PATCH 6.7 613/713] bcachefs: check for failure to downgrade

[Sasha Levin]

From: Kent Overstreet <kent.overstreet@linux.dev>

commit 447c1c01051251853e851bd77f26546488cbc7b7 upstream.

With the upcoming member seq patch, it's now critical that we don't ever
write to a superblock that hasn't been version downgraded - failure to
update member seq fields will cause split brain detection to fire
erroniously.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/errcode.h  |  1 +
 fs/bcachefs/super-io.c | 12 ++++++++++++
 2 files changed, 13 insertions(+)

diff --git a/fs/bcachefs/errcode.h b/fs/bcachefs/errcode.h
index 9ce29681eec96..ac90faccdcb22 100644
--- a/fs/bcachefs/errcode.h
+++ b/fs/bcachefs/errcode.h
@@ -224,6 +224,7 @@
 	x(BCH_ERR_invalid,		invalid_bkey)				\
 	x(BCH_ERR_operation_blocked,    nocow_lock_blocked)			\
 	x(EIO,				btree_node_read_err)			\
+	x(EIO,				sb_not_downgraded)			\
 	x(BCH_ERR_btree_node_read_err,	btree_node_read_err_fixable)		\
 	x(BCH_ERR_btree_node_read_err,	btree_node_read_err_want_retry)		\
 	x(BCH_ERR_btree_node_read_err,	btree_node_read_err_must_retry)		\
diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c
index 4c98d8cc2a797..6405cc1d651fd 100644
--- a/fs/bcachefs/super-io.c
+++ b/fs/bcachefs/super-io.c
@@ -966,6 +966,18 @@ int bch2_write_super(struct bch_fs *c)
 	if (!BCH_SB_INITIALIZED(c->disk_sb.sb))
 		goto out;
 
+	if (le16_to_cpu(c->disk_sb.sb->version) > bcachefs_metadata_version_current) {
+		struct printbuf buf = PRINTBUF;
+		prt_printf(&buf, "attempting to write superblock that wasn't version downgraded (");
+		bch2_version_to_text(&buf, le16_to_cpu(c->disk_sb.sb->version));
+		prt_str(&buf, " > ");
+		bch2_version_to_text(&buf, bcachefs_metadata_version_current);
+		prt_str(&buf, ")");
+		bch2_fs_fatal_error(c, "%s", buf.buf);
+		printbuf_exit(&buf);
+		return -BCH_ERR_sb_not_downgraded;
+	}
+
 	for_each_online_member(ca, c, i) {
 		__set_bit(ca->dev_idx, sb_written.d);
 		ca->sb_write_error = 0;
-- 
2.43.0

[PATCH 6.7 614/713] bcachefs: fix simulateously upgrading & downgrading

[Sasha Levin]

From: Kent Overstreet <kent.overstreet@linux.dev>

commit e7999235e6c437b99fad03d8301a4341be0d2bb5 upstream.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/super-io.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c
index 6405cc1d651fd..c925dc5742fa4 100644
--- a/fs/bcachefs/super-io.c
+++ b/fs/bcachefs/super-io.c
@@ -1085,13 +1085,22 @@ bool bch2_check_version_downgrade(struct bch_fs *c)
 	/*
 	 * Downgrade, if superblock is at a higher version than currently
 	 * supported:
+	 *
+	 * c->sb will be checked before we write the superblock, so update it as
+	 * well:
 	 */
-	if (BCH_SB_VERSION_UPGRADE_COMPLETE(c->disk_sb.sb) > bcachefs_metadata_version_current)
+	if (BCH_SB_VERSION_UPGRADE_COMPLETE(c->disk_sb.sb) > bcachefs_metadata_version_current) {
 		SET_BCH_SB_VERSION_UPGRADE_COMPLETE(c->disk_sb.sb, bcachefs_metadata_version_current);
-	if (c->sb.version > bcachefs_metadata_version_current)
+		c->sb.version_upgrade_complete = bcachefs_metadata_version_current;
+	}
+	if (c->sb.version > bcachefs_metadata_version_current) {
 		c->disk_sb.sb->version = cpu_to_le16(bcachefs_metadata_version_current);
-	if (c->sb.version_min > bcachefs_metadata_version_current)
+		c->sb.version = bcachefs_metadata_version_current;
+	}
+	if (c->sb.version_min > bcachefs_metadata_version_current) {
 		c->disk_sb.sb->version_min = cpu_to_le16(bcachefs_metadata_version_current);
+		c->sb.version_min = bcachefs_metadata_version_current;
+	}
 	c->disk_sb.sb->compat[0] &= cpu_to_le64((1ULL << BCH_COMPAT_NR) - 1);
 	return ret;
 }
-- 
2.43.0

[PATCH 6.7 615/713] bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree

[Sasha Levin]

From: Kent Overstreet <kent.overstreet@linux.dev>

commit 204f45140faa0772d2ca1b3de96d1c0fb3db8e77 upstream.

If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.

Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).

But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.

Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/btree_iter.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/bcachefs/btree_iter.c b/fs/bcachefs/btree_iter.c
index da594e0067697..816ecc3375196 100644
--- a/fs/bcachefs/btree_iter.c
+++ b/fs/bcachefs/btree_iter.c
@@ -2094,7 +2094,9 @@ struct bkey_s_c bch2_btree_iter_peek_upto(struct btree_iter *iter, struct bpos e
 		 * isn't monotonically increasing before FILTER_SNAPSHOTS, and
 		 * that's what we check against in extents mode:
 		 */
-		if (k.k->p.inode > end.inode)
+		if (unlikely(!(iter->flags & BTREE_ITER_IS_EXTENTS)
+			     ? bkey_gt(k.k->p, end)
+			     : k.k->p.inode > end.inode))
 			goto end;
 
 		if (iter->update_path &&
-- 
2.43.0

[PATCH 6.7 616/713] comedi: comedi_8255: Correct error in subdevice initialization

[Sasha Levin]

From: Frej Drejhammar <frej.drejhammar@gmail.com>

commit cfa9ba1ae0bef0681833a22d326174fe633caab5 upstream.

The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework
subdevice initialization functions") to the initialization of the io
field of struct subdev_8255_private broke all cards using the
drivers/comedi/drivers/comedi_8255.c module.

Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field
in the newly allocated struct subdev_8255_private to the non-NULL
callback given to the function, otherwise it used a flag parameter to
select between subdev_8255_mmio and subdev_8255_io. The refactoring
removed that logic and the flag, as subdev_8255_mm_init() and
subdev_8255_io_init() now explicitly pass subdev_8255_mmio and
subdev_8255_io respectively to __subdev_8255_init(), only
__subdev_8255_init() never sets spriv->io to the supplied
callback. That spriv->io is NULL leads to a later BUG:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1
Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS:  00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0
Call Trace:
 <TASK>
 ? __die_body+0x15/0x57
 ? page_fault_oops+0x2ef/0x33c
 ? insert_vmap_area.constprop.0+0xb6/0xd5
 ? alloc_vmap_area+0x529/0x5ee
 ? exc_page_fault+0x15a/0x489
 ? asm_exc_page_fault+0x22/0x30
 __subdev_8255_init+0x79/0x8d [comedi_8255]
 pci_8255_auto_attach+0x11a/0x139 [8255_pci]
 comedi_auto_config+0xac/0x117 [comedi]
 ? __pfx___driver_attach+0x10/0x10
 pci_device_probe+0x88/0xf9
 really_probe+0x101/0x248
 __driver_probe_device+0xbb/0xed
 driver_probe_device+0x1a/0x72
 __driver_attach+0xd4/0xed
 bus_for_each_dev+0x76/0xb8
 bus_add_driver+0xbe/0x1be
 driver_register+0x9a/0xd8
 comedi_pci_driver_register+0x28/0x48 [comedi_pci]
 ? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci]
 do_one_initcall+0x72/0x183
 do_init_module+0x5b/0x1e8
 init_module_from_file+0x86/0xac
 __do_sys_finit_module+0x151/0x218
 do_syscall_64+0x72/0xdb
 entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f72f50a0cb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9
RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e
RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000
R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df
R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8
 </TASK>
Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS:  00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0

This patch simply corrects the above mistake by initializing spriv->io
to the given io callback.

Fixes: 5c57b1ccecc7 ("comedi: comedi_8255: Rework subdevice initialization functions")
Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240211175822.1357-1-frej.drejhammar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/comedi_8255.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c
index e4974b508328d..a933ef53845a5 100644
--- a/drivers/comedi/drivers/comedi_8255.c
+++ b/drivers/comedi/drivers/comedi_8255.c
@@ -159,6 +159,7 @@ static int __subdev_8255_init(struct comedi_device *dev,
 		return -ENOMEM;
 
 	spriv->context = context;
+	spriv->io      = io;
 
 	s->type		= COMEDI_SUBD_DIO;
 	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;
-- 
2.43.0

[PATCH 6.7 617/713] comedi: comedi_test: Prevent timers rescheduling during deletion

[Sasha Levin]

From: Ian Abbott <abbotti@mev.co.uk>

commit f53641a6e849034a44bf80f50245a75d7a376025 upstream.

The comedi_test devices have a couple of timers (ai_timer and ao_timer)
that can be started to simulate hardware interrupts.  Their expiry
functions normally reschedule the timer.  The driver code calls either
del_timer_sync() or del_timer() to delete the timers from the queue, but
does not currently prevent the timers from rescheduling themselves so
synchronized deletion may be ineffective.

Add a couple of boolean members (one for each timer: ai_timer_enable and
ao_timer_enable) to the device private data structure to indicate
whether the timers are allowed to reschedule themselves.  Set the member
to true when adding the timer to the queue, and to false when deleting
the timer from the queue in the waveform_ai_cancel() and
waveform_ao_cancel() functions.

The del_timer_sync() function is also called from the waveform_detach()
function, but the timer enable members will already be set to false when
that function is called, so no change is needed there.

Fixes: 403fe7f34e33 ("staging: comedi: comedi_test: fix timer race conditions")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240214100747.16203-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/comedi_test.c | 30 ++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/comedi/drivers/comedi_test.c b/drivers/comedi/drivers/comedi_test.c
index 30ea8b53ebf81..05ae9122823f8 100644
--- a/drivers/comedi/drivers/comedi_test.c
+++ b/drivers/comedi/drivers/comedi_test.c
@@ -87,6 +87,8 @@ struct waveform_private {
 	struct comedi_device *dev;	/* parent comedi device */
 	u64 ao_last_scan_time;		/* time of previous AO scan in usec */
 	unsigned int ao_scan_period;	/* AO scan period in usec */
+	bool ai_timer_enable:1;		/* should AI timer be running? */
+	bool ao_timer_enable:1;		/* should AO timer be running? */
 	unsigned short ao_loopbacks[N_CHANS];
 };
 
@@ -236,8 +238,12 @@ static void waveform_ai_timer(struct timer_list *t)
 			time_increment = devpriv->ai_convert_time - now;
 		else
 			time_increment = 1;
-		mod_timer(&devpriv->ai_timer,
-			  jiffies + usecs_to_jiffies(time_increment));
+		spin_lock(&dev->spinlock);
+		if (devpriv->ai_timer_enable) {
+			mod_timer(&devpriv->ai_timer,
+				  jiffies + usecs_to_jiffies(time_increment));
+		}
+		spin_unlock(&dev->spinlock);
 	}
 
 overrun:
@@ -393,9 +399,12 @@ static int waveform_ai_cmd(struct comedi_device *dev,
 	 * Seem to need an extra jiffy here, otherwise timer expires slightly
 	 * early!
 	 */
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ai_timer_enable = true;
 	devpriv->ai_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ai_convert_period) + 1;
 	add_timer(&devpriv->ai_timer);
+	spin_unlock_bh(&dev->spinlock);
 	return 0;
 }
 
@@ -404,6 +413,9 @@ static int waveform_ai_cancel(struct comedi_device *dev,
 {
 	struct waveform_private *devpriv = dev->private;
 
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ai_timer_enable = false;
+	spin_unlock_bh(&dev->spinlock);
 	if (in_softirq()) {
 		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ai_timer);
@@ -495,8 +507,12 @@ static void waveform_ao_timer(struct timer_list *t)
 		unsigned int time_inc = devpriv->ao_last_scan_time +
 					devpriv->ao_scan_period - now;
 
-		mod_timer(&devpriv->ao_timer,
-			  jiffies + usecs_to_jiffies(time_inc));
+		spin_lock(&dev->spinlock);
+		if (devpriv->ao_timer_enable) {
+			mod_timer(&devpriv->ao_timer,
+				  jiffies + usecs_to_jiffies(time_inc));
+		}
+		spin_unlock(&dev->spinlock);
 	}
 
 underrun:
@@ -517,9 +533,12 @@ static int waveform_ao_inttrig_start(struct comedi_device *dev,
 	async->inttrig = NULL;
 
 	devpriv->ao_last_scan_time = ktime_to_us(ktime_get());
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ao_timer_enable = true;
 	devpriv->ao_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ao_scan_period);
 	add_timer(&devpriv->ao_timer);
+	spin_unlock_bh(&dev->spinlock);
 
 	return 1;
 }
@@ -604,6 +623,9 @@ static int waveform_ao_cancel(struct comedi_device *dev,
 	struct waveform_private *devpriv = dev->private;
 
 	s->async->inttrig = NULL;
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ao_timer_enable = false;
+	spin_unlock_bh(&dev->spinlock);
 	if (in_softirq()) {
 		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ao_timer);
-- 
2.43.0

[PATCH 6.7 618/713] mei: gsc_proxy: match component when GSC is on different bus

[Sasha Levin]

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit a0776c214d47ea4f7aaef138095beaa41cff03ef upstream.

On Arrow Lake S systems, MEI is no longer strictly connected to bus 0,
while graphics remain exclusively on bus 0. Adapt the component
matching logic to accommodate this change:

Original behavior: Required both MEI and graphics to be on the same
bus 0.

New behavior: Only enforces graphics to be on bus 0 (integrated),
allowing MEI to reside on any bus.
This ensures compatibility with Arrow Lake S and maintains functionality
for the legacy systems.

Fixes: 1dd924f6885b ("mei: gsc_proxy: add gsc proxy driver")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c b/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c
index be52b113aea93..89364bdbb1290 100644
--- a/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c
+++ b/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c
@@ -96,7 +96,8 @@ static const struct component_master_ops mei_component_master_ops = {
  *
  *    The function checks if the device is pci device and
  *    Intel VGA adapter, the subcomponent is SW Proxy
- *    and the parent of MEI PCI and the parent of VGA are the same PCH device.
+ *    and the VGA is on the bus 0 reserved for built-in devices
+ *    to reject discrete GFX.
  *
  * @dev: master device
  * @subcomponent: subcomponent to match (I915_COMPONENT_SWPROXY)
@@ -123,7 +124,8 @@ static int mei_gsc_proxy_component_match(struct device *dev, int subcomponent,
 	if (subcomponent != I915_COMPONENT_GSC_PROXY)
 		return 0;
 
-	return component_compare_dev(dev->parent, ((struct device *)data)->parent);
+	/* Only built-in GFX */
+	return (pdev->bus->number == 0);
 }
 
 static int mei_gsc_proxy_probe(struct mei_cl_device *cldev,
@@ -146,7 +148,7 @@ static int mei_gsc_proxy_probe(struct mei_cl_device *cldev,
 	}
 
 	component_match_add_typed(&cldev->dev, &master_match,
-				  mei_gsc_proxy_component_match, cldev->dev.parent);
+				  mei_gsc_proxy_component_match, NULL);
 	if (IS_ERR_OR_NULL(master_match)) {
 		ret = -ENOMEM;
 		goto err_exit;
-- 
2.43.0

[PATCH 6.7 619/713] remoteproc: stm32: Fix incorrect type in assignment for va

[Sasha Levin]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

[ Upstream commit 32381bbccba4c21145c571701f8f7fb1d9b3a92e ]

The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:

stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@     expected void *va @@     got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse:     expected void *va
stm32_rproc.c:122:12: sparse:     got void [noderef] __iomem *

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 4f469f0bcf8b2..2c28635219ebf 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -120,7 +120,7 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	void *va;
 
 	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
-	va = ioremap_wc(mem->dma, mem->len);
+	va = (__force void *)ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
 		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
@@ -137,7 +137,7 @@ static int stm32_rproc_mem_release(struct rproc *rproc,
 				   struct rproc_mem_entry *mem)
 {
 	dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
-	iounmap(mem->va);
+	iounmap((__force __iomem void *)mem->va);
 
 	return 0;
 }
-- 
2.43.0

[PATCH 6.7 620/713] remoteproc: stm32: Fix incorrect type assignment returned by stm32_rproc_get_loaded_rsc_tablef

[Sasha Levin]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

[ Upstream commit c77b35ce66af25bdd6fde60b62e35b9b316ea5c2 ]

The sparse tool complains about the remove of the _iomem attribute.

stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.

Fixes: 8a471396d21c ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 2c28635219ebf..10b442c6f6323 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -657,7 +657,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 	 * entire area by overwriting it with the initial values stored in rproc->clean_table.
 	 */
 	*table_sz = RSC_TBL_SIZE;
-	return (struct resource_table *)ddata->rsc_va;
+	return (__force struct resource_table *)ddata->rsc_va;
 }
 
 static const struct rproc_ops st_rproc_ops = {
-- 
2.43.0

[PATCH 6.7 621/713] iio: pressure: mprls0025pa fix off-by-one enum

[Sasha Levin]

From: Petre Rodan <petre.rodan@subdimension.ro>

[ Upstream commit 9e65506ca9c7ff716c8441a33417820ad61d3a16 ]

Fix off-by-one error in transfer-function property.
The honeywell,transfer-function property takes values between 1-3 so
make sure the proper enum gets used.

Fixes: 713337d9143ed ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-5-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/pressure/mprls0025pa.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c
index 30fb2de368210..e3f0de020a40c 100644
--- a/drivers/iio/pressure/mprls0025pa.c
+++ b/drivers/iio/pressure/mprls0025pa.c
@@ -323,6 +323,7 @@ static int mpr_probe(struct i2c_client *client)
 	struct iio_dev *indio_dev;
 	struct device *dev = &client->dev;
 	s64 scale, offset;
+	u32 func;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE))
 		return dev_err_probe(dev, -EOPNOTSUPP,
@@ -362,10 +363,11 @@ static int mpr_probe(struct i2c_client *client)
 			return dev_err_probe(dev, ret,
 				"honeywell,pmax-pascal could not be read\n");
 		ret = device_property_read_u32(dev,
-				"honeywell,transfer-function", &data->function);
+				"honeywell,transfer-function", &func);
 		if (ret)
 			return dev_err_probe(dev, ret,
 				"honeywell,transfer-function could not be read\n");
+		data->function = func - 1;
 		if (data->function > MPR_FUNCTION_C)
 			return dev_err_probe(dev, -EINVAL,
 				"honeywell,transfer-function %d invalid\n",
-- 
2.43.0

[PATCH 6.7 622/713] usb: phy: generic: Get the vbus supply

[Sasha Levin]

From: Sean Anderson <sean.anderson@seco.com>

[ Upstream commit 75fd6485cccef269ac9eb3b71cf56753341195ef ]

While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.

Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240123225111.1629405-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/phy-generic.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 770081b828a42..b855d291dfe6b 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -268,6 +268,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
 				     "could not get vbus regulator\n");
 
+	nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus");
+	if (PTR_ERR(nop->vbus_draw) == -ENODEV)
+		nop->vbus_draw = NULL;
+	if (IS_ERR(nop->vbus_draw))
+		return dev_err_probe(dev, PTR_ERR(nop->vbus_draw),
+				     "could not get vbus regulator\n");
+
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
-- 
2.43.0

[PATCH 6.7 623/713] tty: vt: fix 20 vs 0x20 typo in EScsiignore

[Sasha Levin]

From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>

[ Upstream commit 0e6a92f67c8a94707f7bb27ac29e2bdf3e7c167d ]

The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is
wrong.  20 is DC4 in ascii and it makes no sense to consider that as the
bottom limit. Instead, it should be 0x20 as in the other test in
the commit above. This is supposed to NOT change anything as we handle
interesting 20-0x20 asciis far before this if.

So for sakeness, change to 0x20 (which is SPACE).

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.")
Cc: Martin Hostettler <textshell@uchuujin.de>
Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/vt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 156efda7c80d6..6617d3a8e84c9 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2469,7 +2469,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 		}
 		return;
 	case EScsiignore:
-		if (c >= 20 && c <= 0x3f)
+		if (c >= 0x20 && c <= 0x3f)
 			return;
 		vc->vc_state = ESnormal;
 		return;
-- 
2.43.0

[PATCH 6.7 624/713] serial: max310x: fix syntax error in IRQ error message

[Sasha Levin]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

[ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ]

Replace g with q.

Helpful when grepping thru source code or logs for
"request" keyword.

Fixes: f65444187a66 ("serial: New serial driver MAX310X")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 07f7b48bad13d..5aff179bf2978 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1461,7 +1461,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 	if (!ret)
 		return 0;
 
-	dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+	dev_err(dev, "Unable to request IRQ %i\n", irq);
 
 out_uart:
 	for (i = 0; i < devtype->nr; i++) {
-- 
2.43.0

[PATCH 6.7 625/713] tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@linaro.org>

[ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ]

The core expects for tx_empty() either TIOCSER_TEMT when the tx is
empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return
0x4, and at least uart_get_lsr_info() tries to clear exactly
TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung_tty.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 3bd552841cd28..06d140c9f56cf 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -987,11 +987,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 		if ((ufstat & info->tx_fifomask) != 0 ||
 		    (ufstat & info->tx_fifofull))
 			return 0;
-
-		return 1;
+		return TIOCSER_TEMT;
 	}
 
-	return s3c24xx_serial_txempty_nofifo(port);
+	return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
 }
 
 /* no modem control lines */
-- 
2.43.0

[PATCH 6.7 626/713] arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 27058b95fbb784406ea4c40b20caa3f04937140c ]

Ethernet switch does not have addressable subnodes.

This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: ethernet-switch@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml#

Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240111115636.12095-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf0..aadfa0ae05252 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@ ethernet-switch@0 {
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-- 
2.43.0

[PATCH 6.7 627/713] coresight: Fix issue where a source device's helpers aren't disabled

[Sasha Levin]

From: James Clark <james.clark@arm.com>

[ Upstream commit f68bbe4dcfa303164922bc331d2e8d38ed2d4f23 ]

The linked commit reverts the change that accidentally used some sysfs
enable/disable functions from Perf which broke the refcounting, but it
also removes the fact that the sysfs disable function disabled the
helpers.

Add a new wrapper function that does both which is used by both Perf and
sysfs, and label the sysfs disable function appropriately. The naming of
all of the functions will be tidied up later to avoid this happening
again.

Fixes: 287e82cf69aa ("coresight: Fix crash when Perf and sysfs modes are used concurrently")
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-2-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-core.c  | 30 ++++++++++++++-----
 .../hwtracing/coresight/coresight-etm-perf.c  |  2 +-
 drivers/hwtracing/coresight/coresight-priv.h  |  2 +-
 3 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index 9fabe00a40d6a..4b80026db1ab6 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -441,8 +441,26 @@ static void coresight_disable_helpers(struct coresight_device *csdev)
 	}
 }
 
+/*
+ * Helper function to call source_ops(csdev)->disable and also disable the
+ * helpers.
+ *
+ * There is an imbalance between coresight_enable_path() and
+ * coresight_disable_path(). Enabling also enables the source's helpers as part
+ * of the path, but disabling always skips the first item in the path (which is
+ * the source), so sources and their helpers don't get disabled as part of that
+ * function and we need the extra step here.
+ */
+void coresight_disable_source(struct coresight_device *csdev, void *data)
+{
+	if (source_ops(csdev)->disable)
+		source_ops(csdev)->disable(csdev, data);
+	coresight_disable_helpers(csdev);
+}
+EXPORT_SYMBOL_GPL(coresight_disable_source);
+
 /**
- *  coresight_disable_source - Drop the reference count by 1 and disable
+ *  coresight_disable_source_sysfs - Drop the reference count by 1 and disable
  *  the device if there are no users left.
  *
  *  @csdev: The coresight device to disable
@@ -451,17 +469,15 @@ static void coresight_disable_helpers(struct coresight_device *csdev)
  *
  *  Returns true if the device has been disabled.
  */
-bool coresight_disable_source(struct coresight_device *csdev, void *data)
+static bool coresight_disable_source_sysfs(struct coresight_device *csdev,
+					   void *data)
 {
 	if (atomic_dec_return(&csdev->refcnt) == 0) {
-		if (source_ops(csdev)->disable)
-			source_ops(csdev)->disable(csdev, data);
-		coresight_disable_helpers(csdev);
+		coresight_disable_source(csdev, data);
 		csdev->enable = false;
 	}
 	return !csdev->enable;
 }
-EXPORT_SYMBOL_GPL(coresight_disable_source);
 
 /*
  * coresight_disable_path_from : Disable components in the given path beyond
@@ -1202,7 +1218,7 @@ void coresight_disable(struct coresight_device *csdev)
 	if (ret)
 		goto out;
 
-	if (!csdev->enable || !coresight_disable_source(csdev, NULL))
+	if (!csdev->enable || !coresight_disable_source_sysfs(csdev, NULL))
 		goto out;
 
 	switch (csdev->subtype.source_subtype) {
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 89e8ed214ea49..58b32b399fac2 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -587,7 +587,7 @@ static void etm_event_stop(struct perf_event *event, int mode)
 		return;
 
 	/* stop tracer */
-	source_ops(csdev)->disable(csdev, event);
+	coresight_disable_source(csdev, event);
 
 	/* tell the core */
 	event->hw.state = PERF_HES_STOPPED;
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 767076e079701..30c051055e54b 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -233,6 +233,6 @@ void coresight_set_percpu_sink(int cpu, struct coresight_device *csdev);
 struct coresight_device *coresight_get_percpu_sink(int cpu);
 int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode,
 			    void *data);
-bool coresight_disable_source(struct coresight_device *csdev, void *data);
+void coresight_disable_source(struct coresight_device *csdev, void *data);
 
 #endif
-- 
2.43.0

[PATCH 6.7 628/713] coresight: etm4x: Set skip_power_up in etm4_init_arch_data function

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit 1bbe0a247e5d72f723daeecf41596bfa99e199f1 ]

skip_power_up is used in etm4_init_arch_data when set lpoverride. So
need to set the value of it before calling using it.

Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x-core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 34aee59dd1473..18c4544f60454 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -1160,6 +1160,7 @@ static void etm4_init_arch_data(void *info)
 	struct etm4_init_arg *init_arg = info;
 	struct etmv4_drvdata *drvdata;
 	struct csdev_access *csa;
+	struct device *dev = init_arg->dev;
 	int i;
 
 	drvdata = dev_get_drvdata(init_arg->dev);
@@ -1173,6 +1174,10 @@ static void etm4_init_arch_data(void *info)
 	if (!etm4_init_csdev_access(drvdata, csa))
 		return;
 
+	if (!csa->io_mem ||
+	    fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
+		drvdata->skip_power_up = true;
+
 	/* Detect the support for OS Lock before we actually use it */
 	etm_detect_os_lock(drvdata, csa);
 
@@ -1998,11 +2003,6 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg)
 	if (!drvdata->arch)
 		return -EINVAL;
 
-	/* TRCPDCR is not accessible with system instructions. */
-	if (!desc.access.io_mem ||
-	    fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
-		drvdata->skip_power_up = true;
-
 	major = ETM_ARCH_MAJOR_VERSION(drvdata->arch);
 	minor = ETM_ARCH_MINOR_VERSION(drvdata->arch);
 
-- 
2.43.0

[PATCH 6.7 629/713] kconfig: fix infinite loop when expanding a macro at the end of file

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit af8bbce92044dc58e4cc039ab94ee5d470a621f5 ]

A macro placed at the end of a file with no newline causes an infinite
loop.

[Test Kconfig]
  $(info,hello)
  \ No newline at end of file

I realized that flex-provided input() returns 0 instead of EOF when it
reaches the end of a file.

Fixes: 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/lexer.l | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/scripts/kconfig/lexer.l b/scripts/kconfig/lexer.l
index cc386e4436834..2c2b3e6f248ca 100644
--- a/scripts/kconfig/lexer.l
+++ b/scripts/kconfig/lexer.l
@@ -302,8 +302,11 @@ static char *expand_token(const char *in, size_t n)
 	new_string();
 	append_string(in, n);
 
-	/* get the whole line because we do not know the end of token. */
-	while ((c = input()) != EOF) {
+	/*
+	 * get the whole line because we do not know the end of token.
+	 * input() returns 0 (not EOF!) when it reachs the end of file.
+	 */
+	while ((c = input()) != 0) {
 		if (c == '\n') {
 			unput(c);
 			break;
-- 
2.43.0

[PATCH 6.7 630/713] iio: gts-helper: Fix division loop

[Sasha Levin]

From: Matti Vaittinen <mazziesaccount@gmail.com>

[ Upstream commit bb76cc45dcdfcd962a5994b8fe19ab74fc6c3c3a ]

The loop based 64bit division may run for a long time when dividend is a
lot bigger than the divider. Replace the division loop by the
div64_u64() which implementation may be significantly faster.

Tested-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers")
Link: https://lore.kernel.org/r/Zcn-6e-0-nh2WcfU@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/industrialio-gts-helper.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/iio/industrialio-gts-helper.c b/drivers/iio/industrialio-gts-helper.c
index 7653261d2dc2b..b51eb6cb766f3 100644
--- a/drivers/iio/industrialio-gts-helper.c
+++ b/drivers/iio/industrialio-gts-helper.c
@@ -34,24 +34,11 @@
 static int iio_gts_get_gain(const u64 max, const u64 scale)
 {
 	u64 full = max;
-	int tmp = 1;
 
 	if (scale > full || !scale)
 		return -EINVAL;
 
-	if (U64_MAX - full < scale) {
-		/* Risk of overflow */
-		if (full - scale < scale)
-			return 1;
-
-		full -= scale;
-		tmp++;
-	}
-
-	while (full > scale * (u64)tmp)
-		tmp++;
-
-	return tmp;
+	return div64_u64(full, scale);
 }
 
 /**
-- 
2.43.0

[PATCH 6.7 631/713] bus: mhi: ep: check the correct variable in mhi_ep_register_controller()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 27711860c54ccb5e80719df684f49f0bf3f8fb51 ]

There is a copy and paste bug here so it checks "ev_ring_el_cache" instead
of "ring_item_cache".

Fixes: 62210a26cd4f ("bus: mhi: ep: Use slab allocator where applicable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/bebcd822-d465-45da-adae-5435ec93e6d4@moroto.mountain
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/mhi/ep/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index 582d5c166a75e..934cdbca08e44 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -1427,7 +1427,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
 	mhi_cntrl->ring_item_cache = kmem_cache_create("mhi_ep_ring_item",
 							sizeof(struct mhi_ep_ring_item), 0,
 							0, NULL);
-	if (!mhi_cntrl->ev_ring_el_cache) {
+	if (!mhi_cntrl->ring_item_cache) {
 		ret = -ENOMEM;
 		goto err_destroy_tre_buf_cache;
 	}
-- 
2.43.0

[PATCH 6.7 632/713] hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 06226d120a28f146abd3637799958a4dc4dbb7a1 ]

When perf_init_event() calls perf_try_init_event() to init pmu driver,
searches for the next pmu driver only when the return value is -ENOENT.
Therefore, hisi_ptt_pmu_event_init() needs to check the type at the
beginning of the function.
Otherwise, in the case of perf-task mode, perf_try_init_event() returns
-EOPNOTSUPP and skips subsequent pmu drivers, causes perf_init_event() to
fail.

Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240108121906.3514820-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/ptt/hisi_ptt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
index a991ecb7515a3..24a1f7797aeb6 100644
--- a/drivers/hwtracing/ptt/hisi_ptt.c
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -995,6 +995,9 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event)
 	int ret;
 	u32 val;
 
+	if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
+		return -ENOENT;
+
 	if (event->cpu < 0) {
 		dev_dbg(event->pmu->dev, "Per-task mode not supported\n");
 		return -EOPNOTSUPP;
@@ -1003,9 +1006,6 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event)
 	if (event->attach_state & PERF_ATTACH_TASK)
 		return -EOPNOTSUPP;
 
-	if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
-		return -ENOENT;
-
 	ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config);
 	if (ret < 0)
 		return ret;
-- 
2.43.0

[PATCH 6.7 633/713] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3814e0845e772..b1e1d277d4593 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1832,7 +1832,8 @@ config RTC_DRV_MT2712
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0

[PATCH 6.7 633/713] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3814e0845e772..b1e1d277d4593 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1832,7 +1832,8 @@ config RTC_DRV_MT2712
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6.7 634/713] serial: 8250_exar: Don't remove GPIO device on suspend

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ]

It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_exar.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 23366f868ae3a..dab94835b6f5f 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -753,6 +753,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
+	/* Ensure that every init quirk is properly torn down */
 	if (priv->board->exit)
 		priv->board->exit(pcidev);
 }
@@ -767,10 +768,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
 
-	/* Ensure that every init quirk is properly torn down */
-	if (priv->board->exit)
-		priv->board->exit(pcidev);
-
 	return 0;
 }
 
-- 
2.43.0

[PATCH 6.7 635/713] staging: greybus: fix get_channel_from_mode() failure path

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 34164202a5827f60a203ca9acaf2d9f7d432aac8 ]

The get_channel_from_mode() function is supposed to return the channel
which matches the mode.  But it has a bug where if it doesn't find a
matching channel then it returns the last channel.  It should return
NULL instead.

Also remove an unnecessary NULL check on "channel".

Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/379c0cb4-39e0-4293-8a18-c7b1298e5420@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/light.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c
index 87d36948c6106..c6bd86a5335ab 100644
--- a/drivers/staging/greybus/light.c
+++ b/drivers/staging/greybus/light.c
@@ -100,15 +100,15 @@ static struct led_classdev *get_channel_cdev(struct gb_channel *channel)
 static struct gb_channel *get_channel_from_mode(struct gb_light *light,
 						u32 mode)
 {
-	struct gb_channel *channel = NULL;
+	struct gb_channel *channel;
 	int i;
 
 	for (i = 0; i < light->channels_count; i++) {
 		channel = &light->channels[i];
-		if (channel && channel->mode == mode)
-			break;
+		if (channel->mode == mode)
+			return channel;
 	}
-	return channel;
+	return NULL;
 }
 
 static int __gb_lights_flash_intensity_set(struct gb_channel *channel,
-- 
2.43.0

[PATCH 6.7 636/713] usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

[Sasha Levin]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 600556809f04eb3bbccd05218215dcd7b285a9a9 ]

Currently the variable irqflags is being set but is not being used,
it appears it should be used in the call to net2272_probe_fin
rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König
for suggesting the fix.

Cleans up clang scan build warning:
drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags'
set but not used [-Wunused-but-set-variable]

Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/net2272.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 12e76bb62c209..19bbc38f3d35d 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2650,7 +2650,7 @@ net2272_plat_probe(struct platform_device *pdev)
 		goto err_req;
 	}
 
-	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	ret = net2272_probe_fin(dev, irqflags);
 	if (ret)
 		goto err_io;
 
-- 
2.43.0

[PATCH 6.7 637/713] char: xilinx_hwicap: Fix NULL vs IS_ERR() bug

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 316459ba4051fd91237171fdca88920128a646f1 ]

The devm_platform_ioremap_resource() function returns error pointers.
It never returns NULL.  Update the check accordingly.

Fixes: 672371832193 ("char: xilinx_hwicap: Modernize driver probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ef647a9c-b1b7-4338-9bc0-28165ec2a367@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/xilinx_hwicap/xilinx_hwicap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 019cf6079cecd..6d2eadefd9dc9 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -639,8 +639,8 @@ static int hwicap_setup(struct platform_device *pdev, int id,
 	dev_set_drvdata(dev, (void *)drvdata);
 
 	drvdata->base_address = devm_platform_ioremap_resource(pdev, 0);
-	if (!drvdata->base_address) {
-		retval = -ENODEV;
+	if (IS_ERR(drvdata->base_address)) {
+		retval = PTR_ERR(drvdata->base_address);
 		goto failed;
 	}
 
-- 
2.43.0

[PATCH 6.7 638/713] x86/hyperv: Use per cpu initial stack for vtl context

[Sasha Levin]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit 2b4b90e053a29057fb05ba81acce26bddce8d404 ]

Currently, the secondary CPUs in Hyper-V VTL context lack support for
parallel startup. Therefore, relying on the single initial_stack fetched
from the current task structure suffices for all vCPUs.

However, common initial_stack risks stack corruption when parallel startup
is enabled. In order to facilitate parallel startup, use the initial_stack
from the per CPU idle thread instead of the current task.

Fixes: 3be1bc2fe9d2 ("x86/hyperv: VTL support for Hyper-V")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/hv_vtl.c | 19 +++++++++++++++----
 drivers/hv/Kconfig       |  1 +
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
index cf1b78cb2d043..c8062975a5316 100644
--- a/arch/x86/hyperv/hv_vtl.c
+++ b/arch/x86/hyperv/hv_vtl.c
@@ -12,6 +12,7 @@
 #include <asm/i8259.h>
 #include <asm/mshyperv.h>
 #include <asm/realmode.h>
+#include <../kernel/smpboot.h>
 
 extern struct boot_params boot_params;
 static struct real_mode_header hv_vtl_real_mode_header;
@@ -64,7 +65,7 @@ static void hv_vtl_ap_entry(void)
 	((secondary_startup_64_fn)secondary_startup_64)(&boot_params, &boot_params);
 }
 
-static int hv_vtl_bringup_vcpu(u32 target_vp_index, u64 eip_ignored)
+static int hv_vtl_bringup_vcpu(u32 target_vp_index, int cpu, u64 eip_ignored)
 {
 	u64 status;
 	int ret = 0;
@@ -78,7 +79,9 @@ static int hv_vtl_bringup_vcpu(u32 target_vp_index, u64 eip_ignored)
 	struct ldttss_desc *ldt;
 	struct desc_struct *gdt;
 
-	u64 rsp = current->thread.sp;
+	struct task_struct *idle = idle_thread_get(cpu);
+	u64 rsp = (unsigned long)idle->thread.sp;
+
 	u64 rip = (u64)&hv_vtl_ap_entry;
 
 	native_store_gdt(&gdt_ptr);
@@ -205,7 +208,15 @@ static int hv_vtl_apicid_to_vp_id(u32 apic_id)
 
 static int hv_vtl_wakeup_secondary_cpu(u32 apicid, unsigned long start_eip)
 {
-	int vp_id;
+	int vp_id, cpu;
+
+	/* Find the logical CPU for the APIC ID */
+	for_each_present_cpu(cpu) {
+		if (arch_match_cpu_phys_id(cpu, apicid))
+			break;
+	}
+	if (cpu >= nr_cpu_ids)
+		return -EINVAL;
 
 	pr_debug("Bringing up CPU with APIC ID %d in VTL2...\n", apicid);
 	vp_id = hv_vtl_apicid_to_vp_id(apicid);
@@ -219,7 +230,7 @@ static int hv_vtl_wakeup_secondary_cpu(u32 apicid, unsigned long start_eip)
 		return -EINVAL;
 	}
 
-	return hv_vtl_bringup_vcpu(vp_id, start_eip);
+	return hv_vtl_bringup_vcpu(vp_id, cpu, start_eip);
 }
 
 int __init hv_vtl_early_init(void)
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 00242107d62e0..862c47b191afe 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -16,6 +16,7 @@ config HYPERV
 config HYPERV_VTL_MODE
 	bool "Enable Linux to boot in VTL context"
 	depends on X86_64 && HYPERV
+	depends on SMP
 	default n
 	help
 	  Virtual Secure Mode (VSM) is a set of hypervisor capabilities and
-- 
2.43.0

[PATCH 6.7 639/713] ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit f31e0d0c2cad23e0cc48731634f85bb2d8707790 ]

Using __exit for the remove function results in the remove callback
being discarded with SND_SOC_TLV320ADC3XXX=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.

This also fixes a W=1 modpost warning:

	WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x10 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text)

(which only happens with SND_SOC_TLV320ADC3XXX=m).

Fixes: e9a3b57efd28 ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://msgid.link/r/20240310143852.397212-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tlv320adc3xxx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tlv320adc3xxx.c b/sound/soc/codecs/tlv320adc3xxx.c
index 420bbf588efea..e100cc9f5c192 100644
--- a/sound/soc/codecs/tlv320adc3xxx.c
+++ b/sound/soc/codecs/tlv320adc3xxx.c
@@ -1429,7 +1429,7 @@ static int adc3xxx_i2c_probe(struct i2c_client *i2c)
 	return ret;
 }
 
-static void __exit adc3xxx_i2c_remove(struct i2c_client *client)
+static void adc3xxx_i2c_remove(struct i2c_client *client)
 {
 	struct adc3xxx *adc3xxx = i2c_get_clientdata(client);
 
@@ -1452,7 +1452,7 @@ static struct i2c_driver adc3xxx_i2c_driver = {
 		   .of_match_table = tlv320adc3xxx_of_match,
 		  },
 	.probe = adc3xxx_i2c_probe,
-	.remove = __exit_p(adc3xxx_i2c_remove),
+	.remove = adc3xxx_i2c_remove,
 	.id_table = adc3xxx_i2c_id,
 };
 
-- 
2.43.0

[PATCH 6.7 640/713] thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ca93bf607a44c1f009283dac4af7df0d9ae5e357 ]

If devm_krealloc() fails, then 'efuse' is leaking.
So free it to avoid a leak.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/481d345233862d58c3c305855a93d0dbc2bbae7e.1706431063.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/mediatek/lvts_thermal.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 98d9c80bd4c62..fd4bd650c77a6 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -719,8 +719,10 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
 
 		lvts_td->calib = devm_krealloc(dev, lvts_td->calib,
 					       lvts_td->calib_len + len, GFP_KERNEL);
-		if (!lvts_td->calib)
+		if (!lvts_td->calib) {
+			kfree(efuse);
 			return -ENOMEM;
+		}
 
 		memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len);
 
-- 
2.43.0

[PATCH 6.7 641/713] thermal/drivers/qoriq: Fix getting tmu range

[Sasha Levin]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 4d0642074c67ed9928e9d68734ace439aa06e403 ]

TMU Version 1 has 4 TTRCRs, while TMU Version >=2 has 16 TTRCRs.
So limit the len to 4 will report "invalid range data" for i.MX93.

This patch drop the local array with allocated ttrcr array and
able to support larger tmu ranges.

Fixes: f12d60c81fce ("thermal/drivers/qoriq: Support version 2.1")
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240226003657.3012880-1-peng.fan@oss.nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qoriq_thermal.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index ccc2eea7f9f54..404f01cca4dab 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -57,6 +57,9 @@
 #define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
 					   * Control Register
 					   */
+#define NUM_TTRCR_V1	4
+#define NUM_TTRCR_MAX	16
+
 #define REGS_IPBRR(n)		(0xbf8 + 4 * (n)) /* IP Block Revision
 						   * Register n
 						   */
@@ -71,6 +74,7 @@ struct qoriq_sensor {
 
 struct qoriq_tmu_data {
 	int ver;
+	u32 ttrcr[NUM_TTRCR_MAX];
 	struct regmap *regmap;
 	struct clk *clk;
 	struct qoriq_sensor	sensor[SITES_MAX];
@@ -182,17 +186,17 @@ static int qoriq_tmu_calibration(struct device *dev,
 				 struct qoriq_tmu_data *data)
 {
 	int i, val, len;
-	u32 range[4];
 	const u32 *calibration;
 	struct device_node *np = dev->of_node;
 
 	len = of_property_count_u32_elems(np, "fsl,tmu-range");
-	if (len < 0 || len > 4) {
+	if (len < 0 || (data->ver == TMU_VER1 && len > NUM_TTRCR_V1) ||
+	    (data->ver > TMU_VER1 && len > NUM_TTRCR_MAX)) {
 		dev_err(dev, "invalid range data.\n");
 		return len;
 	}
 
-	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+	val = of_property_read_u32_array(np, "fsl,tmu-range", data->ttrcr, len);
 	if (val != 0) {
 		dev_err(dev, "failed to read range data.\n");
 		return val;
@@ -200,7 +204,7 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	/* Init temperature range registers */
 	for (i = 0; i < len; i++)
-		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
+		regmap_write(data->regmap, REGS_TTRnCR(i), data->ttrcr[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
-- 
2.43.0

[PATCH 6.7 642/713] io_uring: don't save/restore iowait state

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 6f0974eccbf78baead1735722c4f1ee3eb9422cd ]

This kind of state is per-syscall, and since we're doing the waiting off
entering the io_uring_enter(2) syscall, there's no way that iowait can
already be set for this case. Simplify it by setting it if we need to,
and always clearing it to 0 when done.

Fixes: 7b72d661f1f2 ("io_uring: gate iowait schedule on having pending requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index b658ba6703cc2..205dad9603733 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2508,7 +2508,7 @@ static bool current_pending_io(void)
 static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
 					  struct io_wait_queue *iowq)
 {
-	int io_wait, ret;
+	int ret;
 
 	if (unlikely(READ_ONCE(ctx->check_cq)))
 		return 1;
@@ -2526,7 +2526,6 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
 	 * can take into account that the task is waiting for IO - turns out
 	 * to be important for low QD IO.
 	 */
-	io_wait = current->in_iowait;
 	if (current_pending_io())
 		current->in_iowait = 1;
 	ret = 0;
@@ -2534,7 +2533,7 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
 		schedule();
 	else if (!schedule_hrtimeout(&iowq->timeout, HRTIMER_MODE_ABS))
 		ret = -ETIME;
-	current->in_iowait = io_wait;
+	current->in_iowait = 0;
 	return ret;
 }
 
-- 
2.43.0

[PATCH 6.7 643/713] spi: lpspi: Avoid potential use-after-free in probe()

[Sasha Levin]

From: Alexander Sverdlin <alexander.sverdlin@siemens.com>

[ Upstream commit 2ae0ab0143fcc06190713ed81a6486ed0ad3c861 ]

fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
 kernfs_find_ns
 kernfs_find_and_get_ns
 sysfs_remove_group
 sysfs_remove_groups
 device_remove_attrs
 device_del
 spi_unregister_controller
 devm_spi_unregister
 release_nodes
 devres_release_all
 really_probe
 driver_probe_device
 __device_attach_driver
 bus_for_each_drv
 __device_attach
 device_initial_probe
 bus_probe_device
 deferred_probe_work_func
 process_one_work
 worker_thread
 kthread
 ret_from_fork

Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240312112050.2503643-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-lpspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 11991eb126364..079035db7dd85 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -830,11 +830,11 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 
 	is_target = of_property_read_bool((&pdev->dev)->of_node, "spi-slave");
 	if (is_target)
-		controller = spi_alloc_target(&pdev->dev,
-					      sizeof(struct fsl_lpspi_data));
+		controller = devm_spi_alloc_target(&pdev->dev,
+						   sizeof(struct fsl_lpspi_data));
 	else
-		controller = spi_alloc_host(&pdev->dev,
-					    sizeof(struct fsl_lpspi_data));
+		controller = devm_spi_alloc_host(&pdev->dev,
+						 sizeof(struct fsl_lpspi_data));
 
 	if (!controller)
 		return -ENOMEM;
-- 
2.43.0

[PATCH 6.7 644/713] ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates

[Sasha Levin]

From: Luca Ceresoli <luca.ceresoli@bootlin.com>

[ Upstream commit 9e2ab4b18ebd46813fc3459207335af4d368e323 ]

The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.

To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:

       vpll0 _OR_ vpll1               "mclk_root"
          clk_i2s2_8ch_tx_src         "mclk_parent"
             clk_i2s2_8ch_tx_mux
                clk_i2s2_8ch_tx       "mclk" or "mclk_tx"

This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):

 0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
    i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
    afterwards

 1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
    does the following two calls

 2. rockchip_i2s_tdm_calibrate_mclk():

    2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
        (mclk_tx_src), which is OK because the vpll0 rate is a good for
        192000 (and sumbultiple) rates

    2b. sets the mclk_root frequency based on ppm calibration computations

    2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
        it is a multiple of the required bit clock

 3. rockchip_i2s_tdm_set_mclk()

    3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
        to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
        not a multiple of the sampling frequency -- this is not OK

        3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
             vpll1 -- this is not OK because the default vpll1 rate can be
	     divided to get 44.1 kHz and related rates, not 192 kHz

The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.

Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.

Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.

The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate.  It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.

The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:

    time play -r <sample_rate> -n synth 30 sine 950 gain -3

The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.

     rate        before     after
   ---------     ------     ------
     8000 Hz     30.60s     30.63s
    11025 Hz     30.45s     30.51s
    16000 Hz     30.47s     30.50s
    22050 Hz     30.78s     30.41s
    32000 Hz     31.02s     30.43s
    44100 Hz     30.78s     30.41s
    48000 Hz     29.81s     30.45s
    88200 Hz     30.78s     30.41s
    96000 Hz     29.79s     30.42s
   176400 Hz     27.40s     30.41s
   192000 Hz     29.79s     30.42s

While the tests are running the clock tree confirms that:

 * without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
   produces 50176000 Hz, which cannot be divided for most audio rates
   except the slowest ones, generating inaccurate rates
 * with the patch:
   - for 192000 Hz vpll0 is used
   - for 176400 Hz vpll1 is used
   - clk_i2s2_8ch_tx always produces (256 * <rate>) Hz

Tested on the RK3308 using the internal audio codec.

Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/rockchip/rockchip_i2s_tdm.c | 352 +-------------------------
 1 file changed, 6 insertions(+), 346 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c
index 860e66ec85e8a..9fa020ef7eab9 100644
--- a/sound/soc/rockchip/rockchip_i2s_tdm.c
+++ b/sound/soc/rockchip/rockchip_i2s_tdm.c
@@ -25,8 +25,6 @@
 #define DEFAULT_MCLK_FS				256
 #define CH_GRP_MAX				4  /* The max channel 8 / 2 */
 #define MULTIPLEX_CH_MAX			10
-#define CLK_PPM_MIN				-1000
-#define CLK_PPM_MAX				1000
 
 #define TRCM_TXRX 0
 #define TRCM_TX 1
@@ -53,20 +51,6 @@ struct rk_i2s_tdm_dev {
 	struct clk *hclk;
 	struct clk *mclk_tx;
 	struct clk *mclk_rx;
-	/* The mclk_tx_src is parent of mclk_tx */
-	struct clk *mclk_tx_src;
-	/* The mclk_rx_src is parent of mclk_rx */
-	struct clk *mclk_rx_src;
-	/*
-	 * The mclk_root0 and mclk_root1 are root parent and supplies for
-	 * the different FS.
-	 *
-	 * e.g:
-	 * mclk_root0 is VPLL0, used for FS=48000Hz
-	 * mclk_root1 is VPLL1, used for FS=44100Hz
-	 */
-	struct clk *mclk_root0;
-	struct clk *mclk_root1;
 	struct regmap *regmap;
 	struct regmap *grf;
 	struct snd_dmaengine_dai_dma_data capture_dma_data;
@@ -76,19 +60,11 @@ struct rk_i2s_tdm_dev {
 	const struct rk_i2s_soc_data *soc_data;
 	bool is_master_mode;
 	bool io_multiplex;
-	bool mclk_calibrate;
 	bool tdm_mode;
-	unsigned int mclk_rx_freq;
-	unsigned int mclk_tx_freq;
-	unsigned int mclk_root0_freq;
-	unsigned int mclk_root1_freq;
-	unsigned int mclk_root0_initial_freq;
-	unsigned int mclk_root1_initial_freq;
 	unsigned int frame_width;
 	unsigned int clk_trcm;
 	unsigned int i2s_sdis[CH_GRP_MAX];
 	unsigned int i2s_sdos[CH_GRP_MAX];
-	int clk_ppm;
 	int refcount;
 	spinlock_t lock; /* xfer lock */
 	bool has_playback;
@@ -114,12 +90,6 @@ static void i2s_tdm_disable_unprepare_mclk(struct rk_i2s_tdm_dev *i2s_tdm)
 {
 	clk_disable_unprepare(i2s_tdm->mclk_tx);
 	clk_disable_unprepare(i2s_tdm->mclk_rx);
-	if (i2s_tdm->mclk_calibrate) {
-		clk_disable_unprepare(i2s_tdm->mclk_tx_src);
-		clk_disable_unprepare(i2s_tdm->mclk_rx_src);
-		clk_disable_unprepare(i2s_tdm->mclk_root0);
-		clk_disable_unprepare(i2s_tdm->mclk_root1);
-	}
 }
 
 /**
@@ -142,29 +112,9 @@ static int i2s_tdm_prepare_enable_mclk(struct rk_i2s_tdm_dev *i2s_tdm)
 	ret = clk_prepare_enable(i2s_tdm->mclk_rx);
 	if (ret)
 		goto err_mclk_rx;
-	if (i2s_tdm->mclk_calibrate) {
-		ret = clk_prepare_enable(i2s_tdm->mclk_tx_src);
-		if (ret)
-			goto err_mclk_rx;
-		ret = clk_prepare_enable(i2s_tdm->mclk_rx_src);
-		if (ret)
-			goto err_mclk_rx_src;
-		ret = clk_prepare_enable(i2s_tdm->mclk_root0);
-		if (ret)
-			goto err_mclk_root0;
-		ret = clk_prepare_enable(i2s_tdm->mclk_root1);
-		if (ret)
-			goto err_mclk_root1;
-	}
 
 	return 0;
 
-err_mclk_root1:
-	clk_disable_unprepare(i2s_tdm->mclk_root0);
-err_mclk_root0:
-	clk_disable_unprepare(i2s_tdm->mclk_rx_src);
-err_mclk_rx_src:
-	clk_disable_unprepare(i2s_tdm->mclk_tx_src);
 err_mclk_rx:
 	clk_disable_unprepare(i2s_tdm->mclk_tx);
 err_mclk_tx:
@@ -564,159 +514,6 @@ static void rockchip_i2s_tdm_xfer_resume(struct snd_pcm_substream *substream,
 			   I2S_XFER_RXS_START);
 }
 
-static int rockchip_i2s_tdm_clk_set_rate(struct rk_i2s_tdm_dev *i2s_tdm,
-					 struct clk *clk, unsigned long rate,
-					 int ppm)
-{
-	unsigned long rate_target;
-	int delta, ret;
-
-	if (ppm == i2s_tdm->clk_ppm)
-		return 0;
-
-	if (ppm < 0)
-		delta = -1;
-	else
-		delta = 1;
-
-	delta *= (int)div64_u64((u64)rate * (u64)abs(ppm) + 500000,
-				1000000);
-
-	rate_target = rate + delta;
-
-	if (!rate_target)
-		return -EINVAL;
-
-	ret = clk_set_rate(clk, rate_target);
-	if (ret)
-		return ret;
-
-	i2s_tdm->clk_ppm = ppm;
-
-	return 0;
-}
-
-static int rockchip_i2s_tdm_calibrate_mclk(struct rk_i2s_tdm_dev *i2s_tdm,
-					   struct snd_pcm_substream *substream,
-					   unsigned int lrck_freq)
-{
-	struct clk *mclk_root;
-	struct clk *mclk_parent;
-	unsigned int mclk_root_freq;
-	unsigned int mclk_root_initial_freq;
-	unsigned int mclk_parent_freq;
-	unsigned int div, delta;
-	u64 ppm;
-	int ret;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		mclk_parent = i2s_tdm->mclk_tx_src;
-	else
-		mclk_parent = i2s_tdm->mclk_rx_src;
-
-	switch (lrck_freq) {
-	case 8000:
-	case 16000:
-	case 24000:
-	case 32000:
-	case 48000:
-	case 64000:
-	case 96000:
-	case 192000:
-		mclk_root = i2s_tdm->mclk_root0;
-		mclk_root_freq = i2s_tdm->mclk_root0_freq;
-		mclk_root_initial_freq = i2s_tdm->mclk_root0_initial_freq;
-		mclk_parent_freq = DEFAULT_MCLK_FS * 192000;
-		break;
-	case 11025:
-	case 22050:
-	case 44100:
-	case 88200:
-	case 176400:
-		mclk_root = i2s_tdm->mclk_root1;
-		mclk_root_freq = i2s_tdm->mclk_root1_freq;
-		mclk_root_initial_freq = i2s_tdm->mclk_root1_initial_freq;
-		mclk_parent_freq = DEFAULT_MCLK_FS * 176400;
-		break;
-	default:
-		dev_err(i2s_tdm->dev, "Invalid LRCK frequency: %u Hz\n",
-			lrck_freq);
-		return -EINVAL;
-	}
-
-	ret = clk_set_parent(mclk_parent, mclk_root);
-	if (ret)
-		return ret;
-
-	ret = rockchip_i2s_tdm_clk_set_rate(i2s_tdm, mclk_root,
-					    mclk_root_freq, 0);
-	if (ret)
-		return ret;
-
-	delta = abs(mclk_root_freq % mclk_parent_freq - mclk_parent_freq);
-	ppm = div64_u64((uint64_t)delta * 1000000, (uint64_t)mclk_root_freq);
-
-	if (ppm) {
-		div = DIV_ROUND_CLOSEST(mclk_root_initial_freq, mclk_parent_freq);
-		if (!div)
-			return -EINVAL;
-
-		mclk_root_freq = mclk_parent_freq * round_up(div, 2);
-
-		ret = clk_set_rate(mclk_root, mclk_root_freq);
-		if (ret)
-			return ret;
-
-		i2s_tdm->mclk_root0_freq = clk_get_rate(i2s_tdm->mclk_root0);
-		i2s_tdm->mclk_root1_freq = clk_get_rate(i2s_tdm->mclk_root1);
-	}
-
-	return clk_set_rate(mclk_parent, mclk_parent_freq);
-}
-
-static int rockchip_i2s_tdm_set_mclk(struct rk_i2s_tdm_dev *i2s_tdm,
-				     struct snd_pcm_substream *substream,
-				     struct clk **mclk)
-{
-	unsigned int mclk_freq;
-	int ret;
-
-	if (i2s_tdm->clk_trcm) {
-		if (i2s_tdm->mclk_tx_freq != i2s_tdm->mclk_rx_freq) {
-			dev_err(i2s_tdm->dev,
-				"clk_trcm, tx: %d and rx: %d should be the same\n",
-				i2s_tdm->mclk_tx_freq,
-				i2s_tdm->mclk_rx_freq);
-			return -EINVAL;
-		}
-
-		ret = clk_set_rate(i2s_tdm->mclk_tx, i2s_tdm->mclk_tx_freq);
-		if (ret)
-			return ret;
-
-		ret = clk_set_rate(i2s_tdm->mclk_rx, i2s_tdm->mclk_rx_freq);
-		if (ret)
-			return ret;
-
-		/* mclk_rx is also ok. */
-		*mclk = i2s_tdm->mclk_tx;
-	} else {
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			*mclk = i2s_tdm->mclk_tx;
-			mclk_freq = i2s_tdm->mclk_tx_freq;
-		} else {
-			*mclk = i2s_tdm->mclk_rx;
-			mclk_freq = i2s_tdm->mclk_rx_freq;
-		}
-
-		ret = clk_set_rate(*mclk, mclk_freq);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
 static int rockchip_i2s_ch_to_io(unsigned int ch, bool substream_capture)
 {
 	if (substream_capture) {
@@ -853,19 +650,17 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
 				      struct snd_soc_dai *dai)
 {
 	struct rk_i2s_tdm_dev *i2s_tdm = to_info(dai);
-	struct clk *mclk;
-	int ret = 0;
 	unsigned int val = 0;
 	unsigned int mclk_rate, bclk_rate, div_bclk = 4, div_lrck = 64;
+	int err;
 
 	if (i2s_tdm->is_master_mode) {
-		if (i2s_tdm->mclk_calibrate)
-			rockchip_i2s_tdm_calibrate_mclk(i2s_tdm, substream,
-							params_rate(params));
+		struct clk *mclk = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			i2s_tdm->mclk_tx : i2s_tdm->mclk_rx;
 
-		ret = rockchip_i2s_tdm_set_mclk(i2s_tdm, substream, &mclk);
-		if (ret)
-			return ret;
+		err = clk_set_rate(mclk, DEFAULT_MCLK_FS * params_rate(params));
+		if (err)
+			return err;
 
 		mclk_rate = clk_get_rate(mclk);
 		bclk_rate = i2s_tdm->frame_width * params_rate(params);
@@ -973,96 +768,6 @@ static int rockchip_i2s_tdm_trigger(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int rockchip_i2s_tdm_set_sysclk(struct snd_soc_dai *cpu_dai, int stream,
-				       unsigned int freq, int dir)
-{
-	struct rk_i2s_tdm_dev *i2s_tdm = to_info(cpu_dai);
-
-	/* Put set mclk rate into rockchip_i2s_tdm_set_mclk() */
-	if (i2s_tdm->clk_trcm) {
-		i2s_tdm->mclk_tx_freq = freq;
-		i2s_tdm->mclk_rx_freq = freq;
-	} else {
-		if (stream == SNDRV_PCM_STREAM_PLAYBACK)
-			i2s_tdm->mclk_tx_freq = freq;
-		else
-			i2s_tdm->mclk_rx_freq = freq;
-	}
-
-	dev_dbg(i2s_tdm->dev, "The target mclk_%s freq is: %d\n",
-		stream ? "rx" : "tx", freq);
-
-	return 0;
-}
-
-static int rockchip_i2s_tdm_clk_compensation_info(struct snd_kcontrol *kcontrol,
-						  struct snd_ctl_elem_info *uinfo)
-{
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	uinfo->count = 1;
-	uinfo->value.integer.min = CLK_PPM_MIN;
-	uinfo->value.integer.max = CLK_PPM_MAX;
-	uinfo->value.integer.step = 1;
-
-	return 0;
-}
-
-static int rockchip_i2s_tdm_clk_compensation_get(struct snd_kcontrol *kcontrol,
-						 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
-	struct rk_i2s_tdm_dev *i2s_tdm = snd_soc_dai_get_drvdata(dai);
-
-	ucontrol->value.integer.value[0] = i2s_tdm->clk_ppm;
-
-	return 0;
-}
-
-static int rockchip_i2s_tdm_clk_compensation_put(struct snd_kcontrol *kcontrol,
-						 struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
-	struct rk_i2s_tdm_dev *i2s_tdm = snd_soc_dai_get_drvdata(dai);
-	int ret = 0, ppm = 0;
-	int changed = 0;
-	unsigned long old_rate;
-
-	if (ucontrol->value.integer.value[0] < CLK_PPM_MIN ||
-	    ucontrol->value.integer.value[0] > CLK_PPM_MAX)
-		return -EINVAL;
-
-	ppm = ucontrol->value.integer.value[0];
-
-	old_rate = clk_get_rate(i2s_tdm->mclk_root0);
-	ret = rockchip_i2s_tdm_clk_set_rate(i2s_tdm, i2s_tdm->mclk_root0,
-					    i2s_tdm->mclk_root0_freq, ppm);
-	if (ret)
-		return ret;
-	if (old_rate != clk_get_rate(i2s_tdm->mclk_root0))
-		changed = 1;
-
-	if (clk_is_match(i2s_tdm->mclk_root0, i2s_tdm->mclk_root1))
-		return changed;
-
-	old_rate = clk_get_rate(i2s_tdm->mclk_root1);
-	ret = rockchip_i2s_tdm_clk_set_rate(i2s_tdm, i2s_tdm->mclk_root1,
-					    i2s_tdm->mclk_root1_freq, ppm);
-	if (ret)
-		return ret;
-	if (old_rate != clk_get_rate(i2s_tdm->mclk_root1))
-		changed = 1;
-
-	return changed;
-}
-
-static struct snd_kcontrol_new rockchip_i2s_tdm_compensation_control = {
-	.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-	.name = "PCM Clock Compensation in PPM",
-	.info = rockchip_i2s_tdm_clk_compensation_info,
-	.get = rockchip_i2s_tdm_clk_compensation_get,
-	.put = rockchip_i2s_tdm_clk_compensation_put,
-};
-
 static int rockchip_i2s_tdm_dai_probe(struct snd_soc_dai *dai)
 {
 	struct rk_i2s_tdm_dev *i2s_tdm = snd_soc_dai_get_drvdata(dai);
@@ -1072,9 +777,6 @@ static int rockchip_i2s_tdm_dai_probe(struct snd_soc_dai *dai)
 	if (i2s_tdm->has_playback)
 		snd_soc_dai_dma_data_set_playback(dai, &i2s_tdm->playback_dma_data);
 
-	if (i2s_tdm->mclk_calibrate)
-		snd_soc_add_dai_controls(dai, &rockchip_i2s_tdm_compensation_control, 1);
-
 	return 0;
 }
 
@@ -1115,7 +817,6 @@ static const struct snd_soc_dai_ops rockchip_i2s_tdm_dai_ops = {
 	.probe = rockchip_i2s_tdm_dai_probe,
 	.hw_params = rockchip_i2s_tdm_hw_params,
 	.set_bclk_ratio	= rockchip_i2s_tdm_set_bclk_ratio,
-	.set_sysclk = rockchip_i2s_tdm_set_sysclk,
 	.set_fmt = rockchip_i2s_tdm_set_fmt,
 	.set_tdm_slot = rockchip_dai_tdm_slot,
 	.trigger = rockchip_i2s_tdm_trigger,
@@ -1444,35 +1145,6 @@ static void rockchip_i2s_tdm_path_config(struct rk_i2s_tdm_dev *i2s_tdm,
 		rockchip_i2s_tdm_tx_path_config(i2s_tdm, num);
 }
 
-static int rockchip_i2s_tdm_get_calibrate_mclks(struct rk_i2s_tdm_dev *i2s_tdm)
-{
-	int num_mclks = 0;
-
-	i2s_tdm->mclk_tx_src = devm_clk_get(i2s_tdm->dev, "mclk_tx_src");
-	if (!IS_ERR(i2s_tdm->mclk_tx_src))
-		num_mclks++;
-
-	i2s_tdm->mclk_rx_src = devm_clk_get(i2s_tdm->dev, "mclk_rx_src");
-	if (!IS_ERR(i2s_tdm->mclk_rx_src))
-		num_mclks++;
-
-	i2s_tdm->mclk_root0 = devm_clk_get(i2s_tdm->dev, "mclk_root0");
-	if (!IS_ERR(i2s_tdm->mclk_root0))
-		num_mclks++;
-
-	i2s_tdm->mclk_root1 = devm_clk_get(i2s_tdm->dev, "mclk_root1");
-	if (!IS_ERR(i2s_tdm->mclk_root1))
-		num_mclks++;
-
-	if (num_mclks < 4 && num_mclks != 0)
-		return -ENOENT;
-
-	if (num_mclks == 4)
-		i2s_tdm->mclk_calibrate = 1;
-
-	return 0;
-}
-
 static int rockchip_i2s_tdm_path_prepare(struct rk_i2s_tdm_dev *i2s_tdm,
 					 struct device_node *np,
 					 bool is_rx_path)
@@ -1610,11 +1282,6 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev)
 	i2s_tdm->io_multiplex =
 		of_property_read_bool(node, "rockchip,io-multiplex");
 
-	ret = rockchip_i2s_tdm_get_calibrate_mclks(i2s_tdm);
-	if (ret)
-		return dev_err_probe(i2s_tdm->dev, ret,
-				     "mclk-calibrate clocks missing");
-
 	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(regs)) {
 		return dev_err_probe(i2s_tdm->dev, PTR_ERR(regs),
@@ -1667,13 +1334,6 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev)
 		goto err_disable_hclk;
 	}
 
-	if (i2s_tdm->mclk_calibrate) {
-		i2s_tdm->mclk_root0_initial_freq = clk_get_rate(i2s_tdm->mclk_root0);
-		i2s_tdm->mclk_root1_initial_freq = clk_get_rate(i2s_tdm->mclk_root1);
-		i2s_tdm->mclk_root0_freq = i2s_tdm->mclk_root0_initial_freq;
-		i2s_tdm->mclk_root1_freq = i2s_tdm->mclk_root1_initial_freq;
-	}
-
 	pm_runtime_enable(&pdev->dev);
 
 	regmap_update_bits(i2s_tdm->regmap, I2S_DMACR, I2S_DMACR_TDL_MASK,
-- 
2.43.0

[PATCH 6.7 645/713] nouveau: reset the bo resource bus info after an eviction

[Sasha Levin]

From: Dave Airlie <airlied@redhat.com>

[ Upstream commit f35c9af45ea7a4b1115b193d84858b14d13517fc ]

Later attempts to refault the bo won't happen and the whole
GPU does to lunch. I think Christian's refactoring of this
code out to the driver broke this not very well tested path.

Fixes: 141b15e59175 ("drm/nouveau: move io_reserve_lru handling into the driver v5")
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311072037.287905-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_bo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 280d1d9a559ba..254d6c9ef2023 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -1255,6 +1255,8 @@ nouveau_ttm_io_mem_reserve(struct ttm_device *bdev, struct ttm_resource *reg)
 			drm_vma_node_unmap(&nvbo->bo.base.vma_node,
 					   bdev->dev_mapping);
 			nouveau_ttm_io_mem_free_locked(drm, nvbo->bo.resource);
+			nvbo->bo.resource->bus.offset = 0;
+			nvbo->bo.resource->bus.addr = NULL;
 			goto retry;
 		}
 
-- 
2.43.0

[PATCH 6.7 646/713] tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 1c4e97dd2d3c9a3e84f7e26346aa39bc426d3249 ]

inet_twsk_purge() uses rcu to find TIME_WAIT and NEW_SYN_RECV
objects to purge.

These objects use SLAB_TYPESAFE_BY_RCU semantic and need special
care. We need to use refcount_inc_not_zero(&sk->sk_refcnt).

Reuse the existing correct logic I wrote for TIME_WAIT,
because both structures have common locations for
sk_state, sk_family, and netns pointer.

If after the refcount_inc_not_zero() the object fields longer match
the keys, use sock_gen_put(sk) to release the refcount.

Then we can call inet_twsk_deschedule_put() for TIME_WAIT,
inet_csk_reqsk_queue_drop_and_put() for NEW_SYN_RECV sockets,
with BH disabled.

Then we need to restart the loop because we had drop rcu_read_lock().

Fixes: 740ea3c4a0b2 ("tcp: Clean up kernel listener's reqsk in inet_twsk_purge()")
Link: https://lore.kernel.org/netdev/CANn89iLvFuuihCtt9PME2uS1WJATnf5fKjDToa1WzVnRzHnPfg@mail.gmail.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240308200122.64357-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_timewait_sock.c | 41 ++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index dd37a5bf68811..757ae3a4e2f1a 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -278,12 +278,12 @@ void __inet_twsk_schedule(struct inet_timewait_sock *tw, int timeo, bool rearm)
 }
 EXPORT_SYMBOL_GPL(__inet_twsk_schedule);
 
+/* Remove all non full sockets (TIME_WAIT and NEW_SYN_RECV) for dead netns */
 void inet_twsk_purge(struct inet_hashinfo *hashinfo, int family)
 {
-	struct inet_timewait_sock *tw;
-	struct sock *sk;
 	struct hlist_nulls_node *node;
 	unsigned int slot;
+	struct sock *sk;
 
 	for (slot = 0; slot <= hashinfo->ehash_mask; slot++) {
 		struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
@@ -292,38 +292,35 @@ void inet_twsk_purge(struct inet_hashinfo *hashinfo, int family)
 		rcu_read_lock();
 restart:
 		sk_nulls_for_each_rcu(sk, node, &head->chain) {
-			if (sk->sk_state != TCP_TIME_WAIT) {
-				/* A kernel listener socket might not hold refcnt for net,
-				 * so reqsk_timer_handler() could be fired after net is
-				 * freed.  Userspace listener and reqsk never exist here.
-				 */
-				if (unlikely(sk->sk_state == TCP_NEW_SYN_RECV &&
-					     hashinfo->pernet)) {
-					struct request_sock *req = inet_reqsk(sk);
-
-					inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, req);
-				}
+			int state = inet_sk_state_load(sk);
 
+			if ((1 << state) & ~(TCPF_TIME_WAIT |
+					     TCPF_NEW_SYN_RECV))
 				continue;
-			}
 
-			tw = inet_twsk(sk);
-			if ((tw->tw_family != family) ||
-				refcount_read(&twsk_net(tw)->ns.count))
+			if (sk->sk_family != family ||
+			    refcount_read(&sock_net(sk)->ns.count))
 				continue;
 
-			if (unlikely(!refcount_inc_not_zero(&tw->tw_refcnt)))
+			if (unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
 				continue;
 
-			if (unlikely((tw->tw_family != family) ||
-				     refcount_read(&twsk_net(tw)->ns.count))) {
-				inet_twsk_put(tw);
+			if (unlikely(sk->sk_family != family ||
+				     refcount_read(&sock_net(sk)->ns.count))) {
+				sock_gen_put(sk);
 				goto restart;
 			}
 
 			rcu_read_unlock();
 			local_bh_disable();
-			inet_twsk_deschedule_put(tw);
+			if (state == TCP_TIME_WAIT) {
+				inet_twsk_deschedule_put(inet_twsk(sk));
+			} else {
+				struct request_sock *req = inet_reqsk(sk);
+
+				inet_csk_reqsk_queue_drop_and_put(req->rsk_listener,
+								  req);
+			}
 			local_bh_enable();
 			goto restart_rcu;
 		}
-- 
2.43.0

[PATCH 6.7 647/713] rds: tcp: Fix use-after-free of net in reqsk_timer_handler().

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 2a750d6a5b365265dbda33330a6188547ddb5c24 ]

syzkaller reported a warning of netns tracker [0] followed by KASAN
splat [1] and another ref tracker warning [1].

syzkaller could not find a repro, but in the log, the only suspicious
sequence was as follows:

  18:26:22 executing program 1:
  r0 = socket$inet6_mptcp(0xa, 0x1, 0x106)
  ...
  connect$inet6(r0, &(0x7f0000000080)={0xa, 0x4001, 0x0, @loopback}, 0x1c) (async)

The notable thing here is 0x4001 in connect(), which is RDS_TCP_PORT.

So, the scenario would be:

  1. unshare(CLONE_NEWNET) creates a per netns tcp listener in
      rds_tcp_listen_init().
  2. syz-executor connect()s to it and creates a reqsk.
  3. syz-executor exit()s immediately.
  4. netns is dismantled.  [0]
  5. reqsk timer is fired, and UAF happens while freeing reqsk.  [1]
  6. listener is freed after RCU grace period.  [2]

Basically, reqsk assumes that the listener guarantees netns safety
until all reqsk timers are expired by holding the listener's refcount.
However, this was not the case for kernel sockets.

Commit 740ea3c4a0b2 ("tcp: Clean up kernel listener's reqsk in
inet_twsk_purge()") fixed this issue only for per-netns ehash.

Let's apply the same fix for the global ehash.

[0]:
ref_tracker: net notrefcnt@0000000065449cc3 has 1/1 users at
     sk_alloc (./include/net/net_namespace.h:337 net/core/sock.c:2146)
     inet6_create (net/ipv6/af_inet6.c:192 net/ipv6/af_inet6.c:119)
     __sock_create (net/socket.c:1572)
     rds_tcp_listen_init (net/rds/tcp_listen.c:279)
     rds_tcp_init_net (net/rds/tcp.c:577)
     ops_init (net/core/net_namespace.c:137)
     setup_net (net/core/net_namespace.c:340)
     copy_net_ns (net/core/net_namespace.c:497)
     create_new_namespaces (kernel/nsproxy.c:110)
     unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4))
     ksys_unshare (kernel/fork.c:3429)
     __x64_sys_unshare (kernel/fork.c:3496)
     do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
     entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
...
WARNING: CPU: 0 PID: 27 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179)

[1]:
BUG: KASAN: slab-use-after-free in inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966)
Read of size 8 at addr ffff88801b370400 by task swapper/0/0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
 print_report (mm/kasan/report.c:378 mm/kasan/report.c:488)
 kasan_report (mm/kasan/report.c:603)
 inet_csk_reqsk_queue_drop (./include/net/inet_hashtables.h:180 net/ipv4/inet_connection_sock.c:952 net/ipv4/inet_connection_sock.c:966)
 reqsk_timer_handler (net/ipv4/inet_connection_sock.c:979 net/ipv4/inet_connection_sock.c:1092)
 call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701)
 __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2038)
 run_timer_softirq (kernel/time/timer.c:2053)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
 irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14))
 </IRQ>

Allocated by task 258 on cpu 0 at 83.612050s:
 kasan_save_stack (mm/kasan/common.c:48)
 kasan_save_track (mm/kasan/common.c:68)
 __kasan_slab_alloc (mm/kasan/common.c:343)
 kmem_cache_alloc (mm/slub.c:3813 mm/slub.c:3860 mm/slub.c:3867)
 copy_net_ns (./include/linux/slab.h:701 net/core/net_namespace.c:421 net/core/net_namespace.c:480)
 create_new_namespaces (kernel/nsproxy.c:110)
 unshare_nsproxy_namespaces (kernel/nsproxy.c:228 (discriminator 4))
 ksys_unshare (kernel/fork.c:3429)
 __x64_sys_unshare (kernel/fork.c:3496)
 do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)

Freed by task 27 on cpu 0 at 329.158864s:
 kasan_save_stack (mm/kasan/common.c:48)
 kasan_save_track (mm/kasan/common.c:68)
 kasan_save_free_info (mm/kasan/generic.c:643)
 __kasan_slab_free (mm/kasan/common.c:265)
 kmem_cache_free (mm/slub.c:4299 mm/slub.c:4363)
 cleanup_net (net/core/net_namespace.c:456 net/core/net_namespace.c:446 net/core/net_namespace.c:639)
 process_one_work (kernel/workqueue.c:2638)
 worker_thread (kernel/workqueue.c:2700 kernel/workqueue.c:2787)
 kthread (kernel/kthread.c:388)
 ret_from_fork (arch/x86/kernel/process.c:153)
 ret_from_fork_asm (arch/x86/entry/entry_64.S:250)

The buggy address belongs to the object at ffff88801b370000
 which belongs to the cache net_namespace of size 4352
The buggy address is located 1024 bytes inside of
 freed 4352-byte region [ffff88801b370000, ffff88801b371100)

[2]:
WARNING: CPU: 0 PID: 95 at lib/ref_tracker.c:228 ref_tracker_free (lib/ref_tracker.c:228 (discriminator 1))
Modules linked in:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:ref_tracker_free (lib/ref_tracker.c:228 (discriminator 1))
...
Call Trace:
<IRQ>
 __sk_destruct (./include/net/net_namespace.h:353 net/core/sock.c:2204)
 rcu_core (./arch/x86/include/asm/preempt.h:26 kernel/rcu/tree.c:2165 kernel/rcu/tree.c:2433)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
 irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632 kernel/softirq.c:644)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1076 (discriminator 14))
</IRQ>

Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 467fa15356ac ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240308200122.64357-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_minisocks.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 9e85f2a0bddd4..0ecc7311dc6ce 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -398,10 +398,6 @@ void tcp_twsk_purge(struct list_head *net_exit_list, int family)
 			/* Even if tw_refcount == 1, we must clean up kernel reqsk */
 			inet_twsk_purge(net->ipv4.tcp_death_row.hashinfo, family);
 		} else if (!purged_once) {
-			/* The last refcount is decremented in tcp_sk_exit_batch() */
-			if (refcount_read(&net->ipv4.tcp_death_row.tw_refcount) == 1)
-				continue;
-
 			inet_twsk_purge(&tcp_hashinfo, family);
 			purged_once = true;
 		}
-- 
2.43.0

[PATCH 6.7 648/713] octeontx2-af: Use matching wake_up API variant in CGX command interface

[Sasha Levin]

From: Linu Cherian <lcherian@marvell.com>

[ Upstream commit e642921dfeed1e15e73f78f2c3b6746f72b6deb2 ]

Use wake_up API instead of wake_up_interruptible, since
wait_event_timeout API is used for waiting on command completion.

Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 6c70c84986904..3c0f55b3e48ea 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -1338,7 +1338,7 @@ static irqreturn_t cgx_fwi_event_handler(int irq, void *data)
 
 		/* Release thread waiting for completion  */
 		lmac->cmd_pend = false;
-		wake_up_interruptible(&lmac->wq_cmd_cmplt);
+		wake_up(&lmac->wq_cmd_cmplt);
 		break;
 	case CGX_EVT_ASYNC:
 		if (cgx_event_is_linkevent(event))
-- 
2.43.0

[PATCH 6.7 649/713] s390/vtime: fix average steal time calculation

[Sasha Levin]

From: Mete Durlu <meted@linux.ibm.com>

[ Upstream commit 367c50f78451d3bd7ad70bc5c89f9ba6dec46ca9 ]

Current average steal timer calculation produces volatile and inflated
values. The only user of this value is KVM so far and it uses that to
decide whether or not to yield the vCPU which is seeing steal time.
KVM compares average steal timer to a threshold and if the threshold
is past then it does not allow CPU polling and yields it to host, else
it keeps the CPU by polling.
Since KVM's steal time threshold is very low by default (%10) it most
likely is not effected much by the bloated average steal timer values
because the operating region is pretty small. However there might be
new users in the future who might rely on this number. Fix average
steal timer calculation by changing the formula from:

	avg_steal_timer = avg_steal_timer / 2 + steal_timer;

to the following:

	avg_steal_timer = (avg_steal_timer + steal_timer) / 2;

This ensures that avg_steal_timer is actually a naive average of steal
timer values. It now closely follows steal timer values but of course
in a smoother manner.

Fixes: 152e9b8676c6 ("s390/vtime: steal time exponential moving average")
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/vtime.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index e0a88dcaf5cb7..24a18e5ef6e8e 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -210,13 +210,13 @@ void vtime_flush(struct task_struct *tsk)
 		virt_timer_expire();
 
 	steal = S390_lowcore.steal_timer;
-	avg_steal = S390_lowcore.avg_steal_timer / 2;
+	avg_steal = S390_lowcore.avg_steal_timer;
 	if ((s64) steal > 0) {
 		S390_lowcore.steal_timer = 0;
 		account_steal_time(cputime_to_nsecs(steal));
 		avg_steal += steal;
 	}
-	S390_lowcore.avg_steal_timer = avg_steal;
+	S390_lowcore.avg_steal_timer = avg_steal / 2;
 }
 
 static u64 vtime_delta(void)
-- 
2.43.0

[PATCH 6.7 650/713] net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 343041b59b7810f9cdca371f445dd43b35c740b1 ]

taprio_parse_tc_entry() is not correctly checking
TCA_TAPRIO_TC_ENTRY_INDEX attribute:

	int tc; // Signed value

	tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]);
	if (tc >= TC_QOPT_MAX_QUEUE) {
		NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range");
		return -ERANGE;
	}

syzbot reported that it could fed arbitary negative values:

UBSAN: shift-out-of-bounds in net/sched/sch_taprio.c:1722:18
shift exponent -2147418108 is negative
CPU: 0 PID: 5066 Comm: syz-executor367 Not tainted 6.8.0-rc7-syzkaller-00136-gc8a5c731fd12 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
  ubsan_epilogue lib/ubsan.c:217 [inline]
  __ubsan_handle_shift_out_of_bounds+0x3c7/0x420 lib/ubsan.c:386
  taprio_parse_tc_entry net/sched/sch_taprio.c:1722 [inline]
  taprio_parse_tc_entries net/sched/sch_taprio.c:1768 [inline]
  taprio_change+0xb87/0x57d0 net/sched/sch_taprio.c:1877
  taprio_init+0x9da/0xc80 net/sched/sch_taprio.c:2134
  qdisc_create+0x9d4/0x1190 net/sched/sch_api.c:1355
  tc_modify_qdisc+0xa26/0x1e40 net/sched/sch_api.c:1776
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6617
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
  ___sys_sendmsg net/socket.c:2638 [inline]
  __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f1b2dea3759
Code: 48 83 c4 28 c3 e8 d7 19 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd4de452f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1b2def0390 RCX: 00007f1b2dea3759
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000004
RBP: 0000000000000003 R08: 0000555500000000 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007ffd4de45340
R13: 00007ffd4de45310 R14: 0000000000000001 R15: 00007ffd4de45340

Fixes: a54fc09e4cba ("net/sched: taprio: allow user input of per-tc max SDU")
Reported-and-tested-by: syzbot+a340daa06412d6028918@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_taprio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 31a8252bd09c9..ad99409c6325e 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -1008,7 +1008,8 @@ static const struct nla_policy entry_policy[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = {
 };
 
 static const struct nla_policy taprio_tc_policy[TCA_TAPRIO_TC_ENTRY_MAX + 1] = {
-	[TCA_TAPRIO_TC_ENTRY_INDEX]	   = { .type = NLA_U32 },
+	[TCA_TAPRIO_TC_ENTRY_INDEX]	   = NLA_POLICY_MAX(NLA_U32,
+							    TC_QOPT_MAX_QUEUE),
 	[TCA_TAPRIO_TC_ENTRY_MAX_SDU]	   = { .type = NLA_U32 },
 	[TCA_TAPRIO_TC_ENTRY_FP]	   = NLA_POLICY_RANGE(NLA_U32,
 							      TC_FP_EXPRESS,
-- 
2.43.0

[PATCH 6.7 651/713] devlink: Move private netlink flags to C file

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 526dd6d7877b80b1f56d87156b65b8227c69d59f ]

The flags are not used outside of the C file so move them there.

Suggested-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d7d75124965a ("devlink: Fix devlink parallel commands processing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/devl_internal.h | 3 ---
 net/devlink/netlink.c       | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/devlink/devl_internal.h b/net/devlink/devl_internal.h
index 183dbe3807ab3..2a9b263300a4b 100644
--- a/net/devlink/devl_internal.h
+++ b/net/devlink/devl_internal.h
@@ -111,9 +111,6 @@ int devlink_rel_devlink_handle_put(struct sk_buff *msg, struct devlink *devlink,
 				   bool *msg_updated);
 
 /* Netlink */
-#define DEVLINK_NL_FLAG_NEED_PORT		BIT(0)
-#define DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT	BIT(1)
-
 enum devlink_multicast_groups {
 	DEVLINK_MCGRP_CONFIG,
 };
diff --git a/net/devlink/netlink.c b/net/devlink/netlink.c
index d0b90ebc8b152..7350138c8bb44 100644
--- a/net/devlink/netlink.c
+++ b/net/devlink/netlink.c
@@ -9,6 +9,9 @@
 
 #include "devl_internal.h"
 
+#define DEVLINK_NL_FLAG_NEED_PORT		BIT(0)
+#define DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT	BIT(1)
+
 static const struct genl_multicast_group devlink_nl_mcgrps[] = {
 	[DEVLINK_MCGRP_CONFIG] = { .name = DEVLINK_GENL_MCGRP_CONFIG_NAME },
 };
-- 
2.43.0

[PATCH 6.7 652/713] devlink: Acquire device lock during netns dismantle

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit e21c52d7814f5768f05224e773644629fe124af2 ]

Device drivers register with devlink from their probe routines (under
the device lock) by acquiring the devlink instance lock and calling
devl_register().

Drivers that support a devlink reload usually implement the
reload_{down, up}() operations in a similar fashion to their remove and
probe routines, respectively.

However, while the remove and probe routines are invoked with the device
lock held, the reload operations are only invoked with the devlink
instance lock held. It is therefore impossible for drivers to acquire
the device lock from their reload operations, as this would result in
lock inversion.

The motivating use case for invoking the reload operations with the
device lock held is in mlxsw which needs to trigger a PCI reset as part
of the reload. The driver cannot call pci_reset_function() as this
function acquires the device lock. Instead, it needs to call
__pci_reset_function_locked which expects the device lock to be held.

To that end, adjust devlink to always acquire the device lock before the
devlink instance lock when performing a reload.

For now, only do that when reload is triggered as part of netns
dismantle. Subsequent patches will handle the case where reload is
explicitly triggered by user space.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d7d75124965a ("devlink: Fix devlink parallel commands processing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/core.c          |  4 ++--
 net/devlink/devl_internal.h | 15 +++++++++++++++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/net/devlink/core.c b/net/devlink/core.c
index bc3d265fe2d6e..7f0b093208d75 100644
--- a/net/devlink/core.c
+++ b/net/devlink/core.c
@@ -503,14 +503,14 @@ static void __net_exit devlink_pernet_pre_exit(struct net *net)
 	 * all devlink instances from this namespace into init_net.
 	 */
 	devlinks_xa_for_each_registered_get(net, index, devlink) {
-		devl_lock(devlink);
+		devl_dev_lock(devlink, true);
 		err = 0;
 		if (devl_is_registered(devlink))
 			err = devlink_reload(devlink, &init_net,
 					     DEVLINK_RELOAD_ACTION_DRIVER_REINIT,
 					     DEVLINK_RELOAD_LIMIT_UNSPEC,
 					     &actions_performed, NULL);
-		devl_unlock(devlink);
+		devl_dev_unlock(devlink, true);
 		devlink_put(devlink);
 		if (err && err != -EOPNOTSUPP)
 			pr_warn("Failed to reload devlink instance into init_net\n");
diff --git a/net/devlink/devl_internal.h b/net/devlink/devl_internal.h
index 2a9b263300a4b..178abaf74a107 100644
--- a/net/devlink/devl_internal.h
+++ b/net/devlink/devl_internal.h
@@ -3,6 +3,7 @@
  * Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com>
  */
 
+#include <linux/device.h>
 #include <linux/etherdevice.h>
 #include <linux/mutex.h>
 #include <linux/netdevice.h>
@@ -96,6 +97,20 @@ static inline bool devl_is_registered(struct devlink *devlink)
 	return xa_get_mark(&devlinks, devlink->index, DEVLINK_REGISTERED);
 }
 
+static inline void devl_dev_lock(struct devlink *devlink, bool dev_lock)
+{
+	if (dev_lock)
+		device_lock(devlink->dev);
+	devl_lock(devlink);
+}
+
+static inline void devl_dev_unlock(struct devlink *devlink, bool dev_lock)
+{
+	devl_unlock(devlink);
+	if (dev_lock)
+		device_unlock(devlink->dev);
+}
+
 typedef void devlink_rel_notify_cb_t(struct devlink *devlink, u32 obj_index);
 typedef void devlink_rel_cleanup_cb_t(struct devlink *devlink, u32 obj_index,
 				      u32 rel_index);
-- 
2.43.0

[PATCH 6.7 653/713] devlink: Enable the use of private flags in post_doit operations

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit c8d0a7d6152bec970552786b77626f4b4c562f4d ]

Currently, private flags (e.g., 'DEVLINK_NL_FLAG_NEED_PORT') are only
used in pre_doit operations, but a subsequent patch will need to
conditionally lock and unlock the device lock in pre and post doit
operations, respectively.

As a preparation, enable the use of private flags in post_doit
operations in a similar fashion to how it is done for pre_doit
operations.

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d7d75124965a ("devlink: Fix devlink parallel commands processing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/netlink.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/devlink/netlink.c b/net/devlink/netlink.c
index 7350138c8bb44..5bb6624f3288e 100644
--- a/net/devlink/netlink.c
+++ b/net/devlink/netlink.c
@@ -141,8 +141,8 @@ int devlink_nl_pre_doit_port_optional(const struct genl_split_ops *ops,
 	return __devlink_nl_pre_doit(skb, info, DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT);
 }
 
-void devlink_nl_post_doit(const struct genl_split_ops *ops,
-			  struct sk_buff *skb, struct genl_info *info)
+static void __devlink_nl_post_doit(struct sk_buff *skb, struct genl_info *info,
+				   u8 flags)
 {
 	struct devlink *devlink;
 
@@ -151,6 +151,12 @@ void devlink_nl_post_doit(const struct genl_split_ops *ops,
 	devlink_put(devlink);
 }
 
+void devlink_nl_post_doit(const struct genl_split_ops *ops,
+			  struct sk_buff *skb, struct genl_info *info)
+{
+	__devlink_nl_post_doit(skb, info, 0);
+}
+
 static int devlink_nl_inst_single_dumpit(struct sk_buff *msg,
 					 struct netlink_callback *cb, int flags,
 					 devlink_nl_dump_one_func_t *dump_one,
-- 
2.43.0

[PATCH 6.7 654/713] devlink: Allow taking device lock in pre_doit operations

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit d32c38256db30a2d55b849e2c77342bc70d58c6e ]

Introduce a new private flag ('DEVLINK_NL_FLAG_NEED_DEV_LOCK') to allow
netlink commands to specify that they need to acquire the device lock in
their pre_doit operation and release it in their post_doit operation.

The reload command will use this flag in the subsequent patch.

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d7d75124965a ("devlink: Fix devlink parallel commands processing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/devl_internal.h |  3 ++-
 net/devlink/health.c        |  3 ++-
 net/devlink/netlink.c       | 19 ++++++++++++-------
 net/devlink/region.c        |  3 ++-
 4 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/net/devlink/devl_internal.h b/net/devlink/devl_internal.h
index 178abaf74a107..5ea2e2012e930 100644
--- a/net/devlink/devl_internal.h
+++ b/net/devlink/devl_internal.h
@@ -152,7 +152,8 @@ typedef int devlink_nl_dump_one_func_t(struct sk_buff *msg,
 				       int flags);
 
 struct devlink *
-devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs);
+devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs,
+			    bool dev_lock);
 
 int devlink_nl_dumpit(struct sk_buff *msg, struct netlink_callback *cb,
 		      devlink_nl_dump_one_func_t *dump_one);
diff --git a/net/devlink/health.c b/net/devlink/health.c
index 695df61f8ac2a..71ae121dc739d 100644
--- a/net/devlink/health.c
+++ b/net/devlink/health.c
@@ -1151,7 +1151,8 @@ devlink_health_reporter_get_from_cb_lock(struct netlink_callback *cb)
 	struct nlattr **attrs = info->attrs;
 	struct devlink *devlink;
 
-	devlink = devlink_get_from_attrs_lock(sock_net(cb->skb->sk), attrs);
+	devlink = devlink_get_from_attrs_lock(sock_net(cb->skb->sk), attrs,
+					      false);
 	if (IS_ERR(devlink))
 		return NULL;
 
diff --git a/net/devlink/netlink.c b/net/devlink/netlink.c
index 5bb6624f3288e..86f12531bf998 100644
--- a/net/devlink/netlink.c
+++ b/net/devlink/netlink.c
@@ -11,6 +11,7 @@
 
 #define DEVLINK_NL_FLAG_NEED_PORT		BIT(0)
 #define DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT	BIT(1)
+#define DEVLINK_NL_FLAG_NEED_DEV_LOCK		BIT(2)
 
 static const struct genl_multicast_group devlink_nl_mcgrps[] = {
 	[DEVLINK_MCGRP_CONFIG] = { .name = DEVLINK_GENL_MCGRP_CONFIG_NAME },
@@ -64,7 +65,8 @@ int devlink_nl_msg_reply_and_new(struct sk_buff **msg, struct genl_info *info)
 }
 
 struct devlink *
-devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs)
+devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs,
+			    bool dev_lock)
 {
 	struct devlink *devlink;
 	unsigned long index;
@@ -78,12 +80,12 @@ devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs)
 	devname = nla_data(attrs[DEVLINK_ATTR_DEV_NAME]);
 
 	devlinks_xa_for_each_registered_get(net, index, devlink) {
-		devl_lock(devlink);
+		devl_dev_lock(devlink, dev_lock);
 		if (devl_is_registered(devlink) &&
 		    strcmp(devlink->dev->bus->name, busname) == 0 &&
 		    strcmp(dev_name(devlink->dev), devname) == 0)
 			return devlink;
-		devl_unlock(devlink);
+		devl_dev_unlock(devlink, dev_lock);
 		devlink_put(devlink);
 	}
 
@@ -93,11 +95,13 @@ devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs)
 static int __devlink_nl_pre_doit(struct sk_buff *skb, struct genl_info *info,
 				 u8 flags)
 {
+	bool dev_lock = flags & DEVLINK_NL_FLAG_NEED_DEV_LOCK;
 	struct devlink_port *devlink_port;
 	struct devlink *devlink;
 	int err;
 
-	devlink = devlink_get_from_attrs_lock(genl_info_net(info), info->attrs);
+	devlink = devlink_get_from_attrs_lock(genl_info_net(info), info->attrs,
+					      dev_lock);
 	if (IS_ERR(devlink))
 		return PTR_ERR(devlink);
 
@@ -117,7 +121,7 @@ static int __devlink_nl_pre_doit(struct sk_buff *skb, struct genl_info *info,
 	return 0;
 
 unlock:
-	devl_unlock(devlink);
+	devl_dev_unlock(devlink, dev_lock);
 	devlink_put(devlink);
 	return err;
 }
@@ -144,10 +148,11 @@ int devlink_nl_pre_doit_port_optional(const struct genl_split_ops *ops,
 static void __devlink_nl_post_doit(struct sk_buff *skb, struct genl_info *info,
 				   u8 flags)
 {
+	bool dev_lock = flags & DEVLINK_NL_FLAG_NEED_DEV_LOCK;
 	struct devlink *devlink;
 
 	devlink = info->user_ptr[0];
-	devl_unlock(devlink);
+	devl_dev_unlock(devlink, dev_lock);
 	devlink_put(devlink);
 }
 
@@ -165,7 +170,7 @@ static int devlink_nl_inst_single_dumpit(struct sk_buff *msg,
 	struct devlink *devlink;
 	int err;
 
-	devlink = devlink_get_from_attrs_lock(sock_net(msg->sk), attrs);
+	devlink = devlink_get_from_attrs_lock(sock_net(msg->sk), attrs, false);
 	if (IS_ERR(devlink))
 		return PTR_ERR(devlink);
 	err = dump_one(msg, devlink, cb, flags | NLM_F_DUMP_FILTERED);
diff --git a/net/devlink/region.c b/net/devlink/region.c
index 0aab7b82d6780..e3bab458db940 100644
--- a/net/devlink/region.c
+++ b/net/devlink/region.c
@@ -883,7 +883,8 @@ int devlink_nl_region_read_dumpit(struct sk_buff *skb,
 
 	start_offset = state->start_offset;
 
-	devlink = devlink_get_from_attrs_lock(sock_net(cb->skb->sk), attrs);
+	devlink = devlink_get_from_attrs_lock(sock_net(cb->skb->sk), attrs,
+					      false);
 	if (IS_ERR(devlink))
 		return PTR_ERR(devlink);
 
-- 
2.43.0

[PATCH 6.7 655/713] devlink: Fix devlink parallel commands processing

[Sasha Levin]

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit d7d75124965aee23e5e4421d78376545cf070b0a ]

Commit 870c7ad4a52b ("devlink: protect devlink->dev by the instance
lock") added devlink instance locking inside a loop that iterates over
all the registered devlink instances on the machine in the pre-doit
phase. This can lead to serialization of devlink commands over
different devlink instances.

For example: While the first devlink instance is executing firmware
flash, all commands to other devlink instances on the machine are
forced to wait until the first devlink finishes.

Therefore, in the pre-doit phase, take the devlink instance lock only
for the devlink instance the command is targeting. Devlink layer is
taking a reference on the devlink instance, ensuring the devlink->dev
pointer is valid. This reference taking was introduced by commit
a380687200e0 ("devlink: take device reference for devlink object").
Without this commit, it would not be safe to access devlink->dev
lockless.

Fixes: 870c7ad4a52b ("devlink: protect devlink->dev by the instance lock")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/netlink.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/devlink/netlink.c b/net/devlink/netlink.c
index 86f12531bf998..0f41fded6a6d7 100644
--- a/net/devlink/netlink.c
+++ b/net/devlink/netlink.c
@@ -80,12 +80,13 @@ devlink_get_from_attrs_lock(struct net *net, struct nlattr **attrs,
 	devname = nla_data(attrs[DEVLINK_ATTR_DEV_NAME]);
 
 	devlinks_xa_for_each_registered_get(net, index, devlink) {
-		devl_dev_lock(devlink, dev_lock);
-		if (devl_is_registered(devlink) &&
-		    strcmp(devlink->dev->bus->name, busname) == 0 &&
-		    strcmp(dev_name(devlink->dev), devname) == 0)
-			return devlink;
-		devl_dev_unlock(devlink, dev_lock);
+		if (strcmp(devlink->dev->bus->name, busname) == 0 &&
+		    strcmp(dev_name(devlink->dev), devname) == 0) {
+			devl_dev_lock(devlink, dev_lock);
+			if (devl_is_registered(devlink))
+				return devlink;
+			devl_dev_unlock(devlink, dev_lock);
+		}
 		devlink_put(devlink);
 	}
 
-- 
2.43.0

[PATCH 6.7 656/713] riscv: Only check online cpus for emulated accesses

[Sasha Levin]

From: Charlie Jenkins <charlie@rivosinc.com>

[ Upstream commit 313130c62cf1fc410ac8730b291fd4fde582d032 ]

The unaligned access checker only sets valid values for online cpus.
Check for these values on online cpus rather than on present cpus.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-2-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/traps_misaligned.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index 5255f8134aeff..1ed769c87ae44 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -632,7 +632,7 @@ void unaligned_emulation_finish(void)
 	 * accesses emulated since tasks requesting such control can run on any
 	 * CPU.
 	 */
-	for_each_present_cpu(cpu) {
+	for_each_online_cpu(cpu) {
 		if (per_cpu(misaligned_access_speed, cpu) !=
 					RISCV_HWPROBE_MISALIGNED_EMULATED) {
 			return;
-- 
2.43.0

[PATCH 6.7 657/713] soc: fsl: dpio: fix kcalloc() argument order

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 72ebb41b88f9d7c10c5e159e0507074af0a22fe2 ]

A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:

drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
  526 |         ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
      |                             ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element

Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.

Dmity independently came up with the same fix.

Fixes: 5c4a5999b245 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/dpio/dpio-service.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 1d2b27e3ea63f..b811446e0fa55 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -523,7 +523,7 @@ int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
 	struct qbman_eq_desc *ed;
 	int i, ret;
 
-	ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+	ed = kcalloc(32, sizeof(struct qbman_eq_desc), GFP_KERNEL);
 	if (!ed)
 		return -ENOMEM;
 
-- 
2.43.0

[PATCH 6.7 658/713] cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()

[Sasha Levin]

From: Sibi Sankar <quic_sibis@quicinc.com>

[ Upstream commit f37a4d6b4a2c77414e8b9d25dd5ee31537ce9b00 ]

In the existing code, per-policy flags don't have any impact i.e.
if cpufreq_driver boost is enabled and boost is disabled for one or
more of the policies, the cpufreq driver will behave as if boost is
enabled.

Fix this by incorporating per-policy boost flag in the policy->max
computation used in cpufreq_frequency_table_cpuinfo and setting the
default per-policy boost to mirror the cpufreq_driver boost flag.

Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by:Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Reviewed-by: Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c    | 18 ++++++++++++------
 drivers/cpufreq/freq_table.c |  2 +-
 2 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 934d35f570b7a..5104f853a923e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -644,14 +644,16 @@ static ssize_t store_local_boost(struct cpufreq_policy *policy,
 	if (policy->boost_enabled == enable)
 		return count;
 
+	policy->boost_enabled = enable;
+
 	cpus_read_lock();
 	ret = cpufreq_driver->set_boost(policy, enable);
 	cpus_read_unlock();
 
-	if (ret)
+	if (ret) {
+		policy->boost_enabled = !policy->boost_enabled;
 		return ret;
-
-	policy->boost_enabled = enable;
+	}
 
 	return count;
 }
@@ -1419,6 +1421,9 @@ static int cpufreq_online(unsigned int cpu)
 			goto out_free_policy;
 		}
 
+		/* Let the per-policy boost flag mirror the cpufreq_driver boost during init */
+		policy->boost_enabled = cpufreq_boost_enabled() && policy_has_boost_freq(policy);
+
 		/*
 		 * The initialization has succeeded and the policy is online.
 		 * If there is a problem with its frequency table, take it
@@ -2755,11 +2760,12 @@ int cpufreq_boost_trigger_state(int state)
 
 	cpus_read_lock();
 	for_each_active_policy(policy) {
+		policy->boost_enabled = state;
 		ret = cpufreq_driver->set_boost(policy, state);
-		if (ret)
+		if (ret) {
+			policy->boost_enabled = !policy->boost_enabled;
 			goto err_reset_state;
-
-		policy->boost_enabled = state;
+		}
 	}
 	cpus_read_unlock();
 
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index c4d4643b6ca65..c17dc51a5a022 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -40,7 +40,7 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 	cpufreq_for_each_valid_entry(pos, table) {
 		freq = pos->frequency;
 
-		if (!cpufreq_boost_enabled()
+		if ((!cpufreq_boost_enabled() || !policy->boost_enabled)
 		    && (pos->flags & CPUFREQ_BOOST_FREQ))
 			continue;
 
-- 
2.43.0

[PATCH 6.7 659/713] io_uring: Fix release of pinned pages when __io_uaddr_map fails

[Sasha Levin]

From: Gabriel Krisman Bertazi <krisman@suse.de>

[ Upstream commit 67d1189d1095d471ed7fa426c7e384a7140a5dd7 ]

Looking at the error path of __io_uaddr_map, if we fail after pinning
the pages for any reasons, ret will be set to -EINVAL and the error
handler won't properly release the pinned pages.

I didn't manage to trigger it without forcing a failure, but it can
happen in real life when memory is heavily fragmented.

Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Fixes: 223ef4743164 ("io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages")
Link: https://lore.kernel.org/r/20240313213912.1920-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 205dad9603733..45d6e440bdc04 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2683,7 +2683,7 @@ static void *__io_uaddr_map(struct page ***pages, unsigned short *npages,
 	struct page **page_array;
 	unsigned int nr_pages;
 	void *page_addr;
-	int ret, i;
+	int ret, i, pinned;
 
 	*npages = 0;
 
@@ -2697,12 +2697,12 @@ static void *__io_uaddr_map(struct page ***pages, unsigned short *npages,
 	if (!page_array)
 		return ERR_PTR(-ENOMEM);
 
-	ret = pin_user_pages_fast(uaddr, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
-					page_array);
-	if (ret != nr_pages) {
-err:
-		io_pages_free(&page_array, ret > 0 ? ret : 0);
-		return ret < 0 ? ERR_PTR(ret) : ERR_PTR(-EFAULT);
+
+	pinned = pin_user_pages_fast(uaddr, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
+				     page_array);
+	if (pinned != nr_pages) {
+		ret = (pinned < 0) ? pinned : -EFAULT;
+		goto free_pages;
 	}
 
 	page_addr = page_address(page_array[0]);
@@ -2716,7 +2716,7 @@ static void *__io_uaddr_map(struct page ***pages, unsigned short *npages,
 		 * didn't support this feature.
 		 */
 		if (PageHighMem(page_array[i]))
-			goto err;
+			goto free_pages;
 
 		/*
 		 * No support for discontig pages for now, should either be a
@@ -2725,13 +2725,17 @@ static void *__io_uaddr_map(struct page ***pages, unsigned short *npages,
 		 * just fail them with EINVAL.
 		 */
 		if (page_address(page_array[i]) != page_addr)
-			goto err;
+			goto free_pages;
 		page_addr += PAGE_SIZE;
 	}
 
 	*pages = page_array;
 	*npages = nr_pages;
 	return page_to_virt(page_array[0]);
+
+free_pages:
+	io_pages_free(&page_array, pinned > 0 ? pinned : 0);
+	return ERR_PTR(ret);
 }
 
 static void *io_rings_map(struct io_ring_ctx *ctx, unsigned long uaddr,
-- 
2.43.0

[PATCH 6.7 660/713] tcp: Fix refcnt handling in __inet_hash_connect().

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 04d9d1fc428ac9f581d55118d67e0cb546701feb ]

syzbot reported a warning in sk_nulls_del_node_init_rcu().

The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc
failure after check_estalblished().") tried to fix an issue that an
unconnected socket occupies an ehash entry when bhash2 allocation fails.

In such a case, we need to revert changes done by check_established(),
which does not hold refcnt when inserting socket into ehash.

So, to revert the change, we need to __sk_nulls_add_node_rcu() instead
of sk_nulls_add_node_rcu().

Otherwise, sock_put() will cause refcnt underflow and leak the socket.

[0]:
WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Modules linked in:
CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2
RSP: 0018:ffffc900032d7848 EFLAGS: 00010246
RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000
RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28
R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140
R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130
FS:  00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139
 dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956
 __inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678
 inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749
 __sys_connect_file net/socket.c:2048 [inline]
 __sys_connect+0x2df/0x310 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x7a/0x90 net/socket.c:2072
 do_syscall_64+0xf9/0x240
 entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f3b8167dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8
 </TASK>

Reported-by: syzbot+12c506c1aae251e70449@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=12c506c1aae251e70449
Fixes: 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240308201623.65448-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 9456bf9e2705b..7967ff7e02f79 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -1137,7 +1137,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 		sock_prot_inuse_add(net, sk->sk_prot, -1);
 
 		spin_lock(lock);
-		sk_nulls_del_node_init_rcu(sk);
+		__sk_nulls_del_node_init_rcu(sk);
 		spin_unlock(lock);
 
 		sk->sk_hash = 0;
-- 
2.43.0

[PATCH 6.7 661/713] vmxnet3: Fix missing reserved tailroom

[Sasha Levin]

From: William Tu <witu@nvidia.com>

[ Upstream commit e127ce7699c1e05279ee5ee61f00893e7bfa9671 ]

Use rbi->len instead of rcd->len for non-dataring packet.

Found issue:
  XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
  WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W  O       6.5.1 #1
  RIP: 0010:xdp_warn+0xf/0x20
  ...
  ? xdp_warn+0xf/0x20
  xdp_do_redirect+0x15f/0x1c0
  vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
  vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
  ? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
  vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
  vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
  __napi_poll+0x20/0x180
  net_rx_action+0x177/0x390

Reported-by: Martin Zaharinov <micron10@gmail.com>
Tested-by: Martin Zaharinov <micron10@gmail.com>
Link: https://lore.kernel.org/netdev/74BF3CC8-2A3A-44FF-98C2-1E20F110A92E@gmail.com/
Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.")
Signed-off-by: William Tu <witu@nvidia.com>
Link: https://lore.kernel.org/r/20240309183147.28222-1-witu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_xdp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_xdp.c b/drivers/net/vmxnet3/vmxnet3_xdp.c
index 80ddaff759d47..a6c787454a1ae 100644
--- a/drivers/net/vmxnet3/vmxnet3_xdp.c
+++ b/drivers/net/vmxnet3/vmxnet3_xdp.c
@@ -382,12 +382,12 @@ vmxnet3_process_xdp(struct vmxnet3_adapter *adapter,
 	page = rbi->page;
 	dma_sync_single_for_cpu(&adapter->pdev->dev,
 				page_pool_get_dma_addr(page) +
-				rq->page_pool->p.offset, rcd->len,
+				rq->page_pool->p.offset, rbi->len,
 				page_pool_get_dma_dir(rq->page_pool));
 
-	xdp_init_buff(&xdp, rbi->len, &rq->xdp_rxq);
+	xdp_init_buff(&xdp, PAGE_SIZE, &rq->xdp_rxq);
 	xdp_prepare_buff(&xdp, page_address(page), rq->page_pool->p.offset,
-			 rcd->len, false);
+			 rbi->len, false);
 	xdp_buff_clear_frags_flag(&xdp);
 
 	xdp_prog = rcu_dereference(rq->adapter->xdp_bpf_prog);
-- 
2.43.0

[PATCH 6.7 662/713] hsr: Fix uninit-value access in hsr_get_node()

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit ddbec99f58571301679addbc022256970ca3eac6 ]

KMSAN reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 fill_frame_info net/hsr/hsr_forward.c:577 [inline]
 hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3087 [inline]
 packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x318/0x740 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
 packet_alloc_skb net/packet/af_packet.c:2936 [inline]
 packet_snd net/packet/af_packet.c:3030 [inline]
 packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================

If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.

This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag.

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-and-tested-by: syzbot+2ef3a8ce8e91b5a50098@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2ef3a8ce8e91b5a50098 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240312152719.724530-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_framereg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index 6d14d935ee828..26329db09210b 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -228,6 +228,10 @@ struct hsr_node *hsr_get_node(struct hsr_port *port, struct list_head *node_db,
 	 */
 	if (ethhdr->h_proto == htons(ETH_P_PRP) ||
 	    ethhdr->h_proto == htons(ETH_P_HSR)) {
+		/* Check if skb contains hsr_ethhdr */
+		if (skb->mac_len < sizeof(struct hsr_ethhdr))
+			return NULL;
+
 		/* Use the existing sequence_nr from the tag as starting point
 		 * for filtering duplicate frames.
 		 */
-- 
2.43.0

[PATCH 6.7 663/713] net: txgbe: fix clk_name exceed MAX_DEV_ID limits

[Sasha Levin]

From: Duanqiang Wen <duanqiangwen@net-swift.com>

[ Upstream commit e30cef001da259e8df354b813015d0e5acc08740 ]

txgbe register clk which name is i2c_designware.pci_dev_id(),
clk_name will be stored in clk_lookup_alloc. If PCIe bus number
is larger than 0x39, clk_name size will be larger than 20 bytes.
It exceeds clk_lookup_alloc MAX_DEV_ID limits. So the driver
shortened clk_name.

Fixes: b63f20485e43 ("net: txgbe: Register fixed rate clock")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20240313080634.459523-1-duanqiangwen@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
index b6c06adb86560..b95187a0847f7 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
@@ -551,7 +551,7 @@ static int txgbe_clock_register(struct txgbe *txgbe)
 	char clk_name[32];
 	struct clk *clk;
 
-	snprintf(clk_name, sizeof(clk_name), "i2c_designware.%d",
+	snprintf(clk_name, sizeof(clk_name), "i2c_dw.%d",
 		 pci_dev_id(pdev));
 
 	clk = clk_register_fixed_rate(NULL, clk_name, NULL, 0, 156250000);
-- 
2.43.0

[PATCH 6.7 664/713] nvme: fix reconnection fail due to reserved tag allocation

[Sasha Levin]

From: Chunguang Xu <chunguang.xu@shopee.com>

[ Upstream commit de105068fead55ed5c07ade75e9c8e7f86a00d1d ]

We found a issue on production environment while using NVMe over RDMA,
admin_q reconnect failed forever while remote target and network is ok.
After dig into it, we found it may caused by a ABBA deadlock due to tag
allocation. In my case, the tag was hold by a keep alive request
waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the
request maked as idle and will not process before reset success. As
fabric_q shares tagset with admin_q, while reconnect remote target, we
need a tag for connect command, but the only one reserved tag was held
by keep alive command which waiting inside admin_q. As a result, we
failed to reconnect admin_q forever. In order to fix this issue, I
think we should keep two reserved tags for admin queue.

Fixes: ed01fee283a0 ("nvme-fabrics: only reserve a single tag")
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c    | 6 ++++--
 drivers/nvme/host/fabrics.h | 7 -------
 2 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 86149275ccb8e..771eac141298c 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4272,7 +4272,8 @@ int nvme_alloc_admin_tag_set(struct nvme_ctrl *ctrl, struct blk_mq_tag_set *set,
 	set->ops = ops;
 	set->queue_depth = NVME_AQ_MQ_TAG_DEPTH;
 	if (ctrl->ops->flags & NVME_F_FABRICS)
-		set->reserved_tags = NVMF_RESERVED_TAGS;
+		/* Reserved for fabric connect and keep alive */
+		set->reserved_tags = 2;
 	set->numa_node = ctrl->numa_node;
 	set->flags = BLK_MQ_F_NO_SCHED;
 	if (ctrl->ops->flags & NVME_F_BLOCKING)
@@ -4341,7 +4342,8 @@ int nvme_alloc_io_tag_set(struct nvme_ctrl *ctrl, struct blk_mq_tag_set *set,
 	if (ctrl->quirks & NVME_QUIRK_SHARED_TAGS)
 		set->reserved_tags = NVME_AQ_DEPTH;
 	else if (ctrl->ops->flags & NVME_F_FABRICS)
-		set->reserved_tags = NVMF_RESERVED_TAGS;
+		/* Reserved for fabric connect */
+		set->reserved_tags = 1;
 	set->numa_node = ctrl->numa_node;
 	set->flags = BLK_MQ_F_SHOULD_MERGE;
 	if (ctrl->ops->flags & NVME_F_BLOCKING)
diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h
index fbaee5a7be196..e4acccc315bd9 100644
--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -18,13 +18,6 @@
 /* default is -1: the fail fast mechanism is disabled  */
 #define NVMF_DEF_FAIL_FAST_TMO		-1
 
-/*
- * Reserved one command for internal usage.  This command is used for sending
- * the connect command, as well as for the keep alive command on the admin
- * queue once live.
- */
-#define NVMF_RESERVED_TAGS	1
-
 /*
  * Define a host as seen by the target.  We allocate one at boot, but also
  * allow the override it when creating controllers.  This is both to provide
-- 
2.43.0

[PATCH 6.7 665/713] net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up

[Sasha Levin]

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit f1b85ef15a99f06ed48871ce933d591127d2dcc0 ]

Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.

Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.

Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Suggested-by: Mason-cw Chang <Mason-cw.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index d2c039f830195..a1231203ecf3d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -677,8 +677,7 @@ static int mtk_mac_finish(struct phylink_config *config, unsigned int mode,
 	mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 	mcr_new = mcr_cur;
 	mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
-		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK |
-		   MAC_MCR_RX_FIFO_CLR_DIS;
+		   MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_RX_FIFO_CLR_DIS;
 
 	/* Only update control register when needed! */
 	if (mcr_new != mcr_cur)
@@ -694,7 +693,7 @@ static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode,
 					   phylink_config);
 	u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
 
-	mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN);
+	mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK);
 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
 }
 
@@ -803,7 +802,7 @@ static void mtk_mac_link_up(struct phylink_config *config,
 	if (rx_pause)
 		mcr |= MAC_MCR_FORCE_RX_FC;
 
-	mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN;
+	mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK;
 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
 }
 
-- 
2.43.0

[PATCH 6.7 666/713] net: ethernet: mtk_eth_soc: fix PPE hanging issue

[Sasha Levin]

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit ea80e3ed09ab2c2b75724faf5484721753e92c31 ]

A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
disabling the PPE. This can potentially lead to a hang during the process
of disabling the PPE.

Without this patch, the PPE may experience a hang during the reboot test.

Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b40da332dfe763932a82f9f62a4709457a15dd6c
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_ppe.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_ppe.c b/drivers/net/ethernet/mediatek/mtk_ppe.c
index b2a5d9c3733d4..6ce0db3a1a920 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
@@ -994,7 +994,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
 			 MTK_PPE_KEEPALIVE_DISABLE) |
 	      FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) |
 	      FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE,
-			 MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) |
+			 MTK_PPE_SCAN_MODE_CHECK_AGE) |
 	      FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
 			 MTK_PPE_ENTRIES_SHIFT);
 	if (mtk_is_netsys_v2_or_greater(ppe->eth))
@@ -1090,17 +1090,21 @@ int mtk_ppe_stop(struct mtk_ppe *ppe)
 
 	mtk_ppe_cache_enable(ppe, false);
 
-	/* disable offload engine */
-	ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
-	ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
-
 	/* disable aging */
 	val = MTK_PPE_TB_CFG_AGE_NON_L4 |
 	      MTK_PPE_TB_CFG_AGE_UNBIND |
 	      MTK_PPE_TB_CFG_AGE_TCP |
 	      MTK_PPE_TB_CFG_AGE_UDP |
-	      MTK_PPE_TB_CFG_AGE_TCP_FIN;
+	      MTK_PPE_TB_CFG_AGE_TCP_FIN |
+		  MTK_PPE_TB_CFG_SCAN_MODE;
 	ppe_clear(ppe, MTK_PPE_TB_CFG, val);
 
-	return mtk_ppe_wait_busy(ppe);
+	if (mtk_ppe_wait_busy(ppe))
+		return -ETIMEDOUT;
+
+	/* disable offload engine */
+	ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
+	ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
+
+	return 0;
 }
-- 
2.43.0

[PATCH 6.7 667/713] io_uring: fix poll_remove stalled req completion

[Sasha Levin]

From: Pavel Begunkov <asml.silence@gmail.com>

[ Upstream commit 5e3afe580a9f5ca173a6bd55ffe10948796ef7e5 ]

Taking the ctx lock is not enough to use the deferred request completion
infrastructure, it'll get queued into the list but no one would expect
it there, so it will sit there until next io_submit_flush_completions().
It's hard to care about the cancellation path, so complete it via tw.

Fixes: ef7dfac51d8ed ("io_uring/poll: serialize poll linked timer start with poll removal")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c446740bc16858f8a2a8dcdce899812f21d15f23.1710514702.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/poll.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/io_uring/poll.c b/io_uring/poll.c
index 7513afc7b702e..58b7556f621eb 100644
--- a/io_uring/poll.c
+++ b/io_uring/poll.c
@@ -995,7 +995,6 @@ int io_poll_remove(struct io_kiocb *req, unsigned int issue_flags)
 	struct io_hash_bucket *bucket;
 	struct io_kiocb *preq;
 	int ret2, ret = 0;
-	struct io_tw_state ts = { .locked = true };
 
 	io_ring_submit_lock(ctx, issue_flags);
 	preq = io_poll_find(ctx, true, &cd, &ctx->cancel_table, &bucket);
@@ -1044,7 +1043,8 @@ int io_poll_remove(struct io_kiocb *req, unsigned int issue_flags)
 
 	req_set_fail(preq);
 	io_req_set_res(preq, -ECANCELED, 0);
-	io_req_task_complete(preq, &ts);
+	preq->io_task_work.func = io_req_task_complete;
+	io_req_task_work_add(preq);
 out:
 	io_ring_submit_unlock(ctx, issue_flags);
 	if (ret < 0) {
-- 
2.43.0

[PATCH 6.7 668/713] riscv: Fix compilation error with FAST_GUP and rv32

[Sasha Levin]

From: Alexandre Ghiti <alexghiti@rivosinc.com>

[ Upstream commit 2bb7e0c49302feec1c2f777bbfe8726169986ed8 ]

By surrounding the definition of pte_leaf_size() with a ifdef napot as
it should have been.

Fixes: e0fe5ab4192c ("riscv: Fix pte_leaf_size() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/pgtable.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 76b131e7bbcad..a66845e31abad 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -439,9 +439,11 @@ static inline pte_t pte_mkhuge(pte_t pte)
 	return pte;
 }
 
+#ifdef CONFIG_RISCV_ISA_SVNAPOT
 #define pte_leaf_size(pte)	(pte_napot(pte) ?				\
 					napot_cont_size(napot_cont_order(pte)) :\
 					PAGE_SIZE)
+#endif
 
 #ifdef CONFIG_NUMA_BALANCING
 /*
-- 
2.43.0

[PATCH 6.7 669/713] xen/evtchn: avoid WARN() when unbinding an event channel

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 51c23bd691c0f1fb95b29731c356c6fd69925d17 ]

When unbinding a user event channel, the related handler might be
called a last time in case the kernel was built with
CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler.

Avoid that by adding an "unbinding" flag to struct user_event which
will short circuit the handler.

Fixes: 9e90e58c11b7 ("xen: evtchn: Allow shared registration of IRQ handers")
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20240313071409.25913-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/evtchn.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 59717628ca42b..f6a2216c2c870 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -85,6 +85,7 @@ struct user_evtchn {
 	struct per_user_data *user;
 	evtchn_port_t port;
 	bool enabled;
+	bool unbinding;
 };
 
 static void evtchn_free_ring(evtchn_port_t *ring)
@@ -164,6 +165,10 @@ static irqreturn_t evtchn_interrupt(int irq, void *data)
 	struct per_user_data *u = evtchn->user;
 	unsigned int prod, cons;
 
+	/* Handler might be called when tearing down the IRQ. */
+	if (evtchn->unbinding)
+		return IRQ_HANDLED;
+
 	WARN(!evtchn->enabled,
 	     "Interrupt for port %u, but apparently not enabled; per-user %p\n",
 	     evtchn->port, u);
@@ -421,6 +426,7 @@ static void evtchn_unbind_from_user(struct per_user_data *u,
 
 	BUG_ON(irq < 0);
 
+	evtchn->unbinding = true;
 	unbind_from_irqhandler(irq, evtchn);
 
 	del_evtchn(u, evtchn);
-- 
2.43.0

[PATCH 6.7 670/713] xen/events: increment refcnt only if event channel is refcounted

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit d277f9d82802223f242cd9b60c988cfdda1d6be0 ]

In bind_evtchn_to_irq_chip() don't increment the refcnt of the event
channel blindly. In case the event channel is NOT refcounted, issue a
warning instead.

Add an additional safety net by doing the refcnt increment only if the
caller has specified IRQF_SHARED in the irqflags parameter.

Fixes: 9e90e58c11b7 ("xen: evtchn: Allow shared registration of IRQ handers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20240313071409.25913-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/events/events_base.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 3b9f080109d7e..27553673e46bc 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -1190,7 +1190,7 @@ int xen_pirq_from_irq(unsigned irq)
 EXPORT_SYMBOL_GPL(xen_pirq_from_irq);
 
 static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip,
-				   struct xenbus_device *dev)
+				   struct xenbus_device *dev, bool shared)
 {
 	int ret = -ENOMEM;
 	struct irq_info *info;
@@ -1224,7 +1224,8 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip,
 		 */
 		bind_evtchn_to_cpu(info, 0, false);
 	} else if (!WARN_ON(info->type != IRQT_EVTCHN)) {
-		info->refcnt++;
+		if (shared && !WARN_ON(info->refcnt < 0))
+			info->refcnt++;
 	}
 
 	ret = info->irq;
@@ -1237,13 +1238,13 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip,
 
 int bind_evtchn_to_irq(evtchn_port_t evtchn)
 {
-	return bind_evtchn_to_irq_chip(evtchn, &xen_dynamic_chip, NULL);
+	return bind_evtchn_to_irq_chip(evtchn, &xen_dynamic_chip, NULL, false);
 }
 EXPORT_SYMBOL_GPL(bind_evtchn_to_irq);
 
 int bind_evtchn_to_irq_lateeoi(evtchn_port_t evtchn)
 {
-	return bind_evtchn_to_irq_chip(evtchn, &xen_lateeoi_chip, NULL);
+	return bind_evtchn_to_irq_chip(evtchn, &xen_lateeoi_chip, NULL, false);
 }
 EXPORT_SYMBOL_GPL(bind_evtchn_to_irq_lateeoi);
 
@@ -1295,7 +1296,8 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
 
 static int bind_interdomain_evtchn_to_irq_chip(struct xenbus_device *dev,
 					       evtchn_port_t remote_port,
-					       struct irq_chip *chip)
+					       struct irq_chip *chip,
+					       bool shared)
 {
 	struct evtchn_bind_interdomain bind_interdomain;
 	int err;
@@ -1307,14 +1309,14 @@ static int bind_interdomain_evtchn_to_irq_chip(struct xenbus_device *dev,
 					  &bind_interdomain);
 
 	return err ? : bind_evtchn_to_irq_chip(bind_interdomain.local_port,
-					       chip, dev);
+					       chip, dev, shared);
 }
 
 int bind_interdomain_evtchn_to_irq_lateeoi(struct xenbus_device *dev,
 					   evtchn_port_t remote_port)
 {
 	return bind_interdomain_evtchn_to_irq_chip(dev, remote_port,
-						   &xen_lateeoi_chip);
+						   &xen_lateeoi_chip, false);
 }
 EXPORT_SYMBOL_GPL(bind_interdomain_evtchn_to_irq_lateeoi);
 
@@ -1430,7 +1432,8 @@ static int bind_evtchn_to_irqhandler_chip(evtchn_port_t evtchn,
 {
 	int irq, retval;
 
-	irq = bind_evtchn_to_irq_chip(evtchn, chip, NULL);
+	irq = bind_evtchn_to_irq_chip(evtchn, chip, NULL,
+				      irqflags & IRQF_SHARED);
 	if (irq < 0)
 		return irq;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
@@ -1471,7 +1474,8 @@ static int bind_interdomain_evtchn_to_irqhandler_chip(
 {
 	int irq, retval;
 
-	irq = bind_interdomain_evtchn_to_irq_chip(dev, remote_port, chip);
+	irq = bind_interdomain_evtchn_to_irq_chip(dev, remote_port, chip,
+						  irqflags & IRQF_SHARED);
 	if (irq < 0)
 		return irq;
 
-- 
2.43.0

[PATCH 6.7 671/713] packet: annotate data-races around ignore_outgoing

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6ebfad33161afacb3e1e59ed1c2feefef70f9f97 ]

ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

syzbot reported:

BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt

write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
 packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
 do_sock_setsockopt net/socket.c:2311 [inline]
 __sys_setsockopt+0x1d8/0x250 net/socket.c:2334
 __do_sys_setsockopt net/socket.c:2343 [inline]
 __se_sys_setsockopt net/socket.c:2340 [inline]
 __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
 dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
 xmit_one net/core/dev.c:3527 [inline]
 dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
 batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
 batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
 worker_thread+0x526/0x730 kernel/workqueue.c:3416
 kthread+0x1d1/0x210 kernel/kthread.c:388
 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G        W          6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet

Fixes: fa788d986a3a ("packet: add sockopt to ignore outgoing packets")
Reported-by: syzbot+c669c1136495a2e7c31f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c         | 2 +-
 net/packet/af_packet.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index add22ca0dff95..ae898594690f7 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2262,7 +2262,7 @@ void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 	rcu_read_lock();
 again:
 	list_for_each_entry_rcu(ptype, ptype_list, list) {
-		if (ptype->ignore_outgoing)
+		if (READ_ONCE(ptype->ignore_outgoing))
 			continue;
 
 		/* Never send packets back to the socket
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 7adf48549a3b7..f017d7d33da39 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4004,7 +4004,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, sockptr_t optval,
 		if (val < 0 || val > 1)
 			return -EINVAL;
 
-		po->prot_hook.ignore_outgoing = !!val;
+		WRITE_ONCE(po->prot_hook.ignore_outgoing, !!val);
 		return 0;
 	}
 	case PACKET_TX_HAS_OFF:
@@ -4135,7 +4135,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 		       0);
 		break;
 	case PACKET_IGNORE_OUTGOING:
-		val = po->prot_hook.ignore_outgoing;
+		val = READ_ONCE(po->prot_hook.ignore_outgoing);
 		break;
 	case PACKET_ROLLOVER_STATS:
 		if (!po->rollover)
-- 
2.43.0

[PATCH 6.7 672/713] xfrm: Allow UDP encapsulation only in offload modes

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 773bb766ca4a05bf363203030b72b10088869224 ]

The missing check of x->encap caused to the situation where GSO packets
were created with UDP encapsulation.

As a solution return the encap check for non-offloaded SA.

Fixes: 983a73da1f99 ("xfrm: Pass UDP encapsulation in TX packet offload")
Closes: https://lore.kernel.org/all/a650221ae500f0c7cf496c61c96c1b103dcb6f67.camel@redhat.com
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_device.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c
index 653e51ae39648..6346690d5c699 100644
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -407,7 +407,8 @@ bool xfrm_dev_offload_ok(struct sk_buff *skb, struct xfrm_state *x)
 	struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
 	struct net_device *dev = x->xso.dev;
 
-	if (!x->type_offload)
+	if (!x->type_offload ||
+	    (x->xso.type == XFRM_DEV_OFFLOAD_UNSPECIFIED && x->encap))
 		return false;
 
 	if (x->xso.type == XFRM_DEV_OFFLOAD_PACKET ||
-- 
2.43.0

[PATCH 6.7 673/713] net: veth: do not manipulate GRO when using XDP

[Sasha Levin]

From: Ignat Korchagin <ignat@cloudflare.com>

[ Upstream commit d7db7775ea2e31502d46427f5efd385afc4ff1eb ]

Commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP") tried to fix
the fact that GRO was not possible without XDP, because veth did not use NAPI
without XDP. However, it also introduced the behaviour that GRO is always
enabled, when XDP is enabled.

While it might be desired for most cases, it is confusing for the user at best
as the GRO flag suddenly changes, when an XDP program is attached. It also
introduces some complexities in state management as was partially addressed in
commit fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down").

But the biggest problem is that it is not possible to disable GRO at all, when
an XDP program is attached, which might be needed for some use cases.

Fix this by not touching the GRO flag on XDP enable/disable as the code already
supports switching to NAPI if either GRO or XDP is requested.

Link: https://lore.kernel.org/lkml/20240311124015.38106-1-ignat@cloudflare.com/
Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP")
Fixes: fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index a2e80278eb2f9..2f3fd287378fd 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -1533,8 +1533,6 @@ static netdev_features_t veth_fix_features(struct net_device *dev,
 		if (peer_priv->_xdp_prog)
 			features &= ~NETIF_F_GSO_SOFTWARE;
 	}
-	if (priv->_xdp_prog)
-		features |= NETIF_F_GRO;
 
 	return features;
 }
@@ -1638,14 +1636,6 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
 		}
 
 		if (!old_prog) {
-			if (!veth_gro_requested(dev)) {
-				/* user-space did not require GRO, but adding
-				 * XDP is supposed to get GRO working
-				 */
-				dev->features |= NETIF_F_GRO;
-				netdev_features_change(dev);
-			}
-
 			peer->hw_features &= ~NETIF_F_GSO_SOFTWARE;
 			peer->max_mtu = max_mtu;
 		}
@@ -1661,14 +1651,6 @@ static int veth_xdp_set(struct net_device *dev, struct bpf_prog *prog,
 			if (dev->flags & IFF_UP)
 				veth_disable_xdp(dev);
 
-			/* if user-space did not require GRO, since adding XDP
-			 * enabled it, clear it now
-			 */
-			if (!veth_gro_requested(dev)) {
-				dev->features &= ~NETIF_F_GRO;
-				netdev_features_change(dev);
-			}
-
 			if (peer) {
 				peer->hw_features |= NETIF_F_GSO_SOFTWARE;
 				peer->max_mtu = ETH_MAX_MTU;
-- 
2.43.0

[PATCH 6.7 674/713] net: dsa: mt7530: prevent possible incorrect XTAL frequency selection

[Sasha Levin]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit f490c492e946d8ffbe65ad4efc66de3c5ede30a4 ]

On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit
value that represents the frequency of the crystal oscillator connected to
the switch IC. The field is populated by the state of the ESW_P4_LED_0 and
ESW_P4_LED_0 pins, which is done right after reset is deasserted.

  ESW_P4_LED_0    ESW_P3_LED_0    Frequency
  -----------------------------------------
  0               0               Reserved
  0               1               20MHz
  1               0               40MHz
  1               1               25MHz

On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0
pin is used to populate the bit. 25MHz when the pin is high, 40MHz when
it's low.

These pins are also used with LEDs, therefore, their state can be set to
something other than the bootstrapping configuration. For example, a link
may be established on port 3 before the DSA subdriver takes control of the
switch which would set ESW_P3_LED_0 to high.

Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is
described between reset assertion and deassertion. Some switch ICs in real
life conditions cannot always have these pins set back to the bootstrapping
configuration before reset deassertion in this amount of delay. This causes
wrong crystal frequency to be selected which puts the switch in a
nonfunctional state after reset deassertion.

The tests below are conducted on an MT7530 with a 40MHz crystal oscillator
by Justin Swartz.

With a cable from an active peer connected to port 3 before reset, an
incorrect crystal frequency (0b11 = 25MHz) is selected:

                      [1]                  [3]     [5]
                      :                    :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              _____________________________
ESW_P3_LED_0                               |__________________________

                       :                  : :     :
                       :                  : [4]...:
                       :                  :
                       [2]................:

[1] Reset is asserted.
[2] Period of 1000 - 1100 usec.
[3] Reset is deasserted.
[4] Period of 315 usec. HWTRAP register is populated with incorrect
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

Increase the delay between reset_control_assert() and
reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and
gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount
ensures a higher possibility that the switch IC will have these pins back
to the bootstrapping configuration before reset deassertion.

With a cable from an active peer connected to port 3 before reset, the
correct crystal frequency (0b10 = 40MHz) is selected:

                      [1]        [2-1]     [3]     [5]
                      :          :         :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              ___________________           _______
ESW_P3_LED_0                     |_________|       |__________________

                       :          :       : :     :
                       :          [2-2]...: [4]...:
                       [2]................:

[1] Reset is asserted.
[2] Period of 5000 - 5100 usec.
[2-1] ESW_P3_LED_0 goes low.
[2-2] Remaining period of 5000 - 5100 usec.
[3] Reset is deasserted.
[4] Period of 310 usec. HWTRAP register is populated with bootstrapped
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

ESW_P3_LED_0 low period before reset deassertion:

              5000 usec
            - 5100 usec
    TEST     RESET HOLD
       #         (usec)
  ---------------------
       1           5410
       2           5440
       3           4375
       4           5490
       5           5475
       6           4335
       7           4370
       8           5435
       9           4205
      10           4335
      11           3750
      12           3170
      13           4395
      14           4375
      15           3515
      16           4335
      17           4220
      18           4175
      19           4175
      20           4350

     Min           3170
     Max           5490

  Median       4342.500
     Avg       4466.500

Revert commit 2920dd92b980 ("net: dsa: mt7530: disable LEDs before reset").
Changing the state of pins via reset assertion is simpler and more
efficient than doing so by setting the LED controller off.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Co-developed-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2333f6383b542..940ca59585568 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2243,11 +2243,11 @@ mt7530_setup(struct dsa_switch *ds)
 	 */
 	if (priv->mcm) {
 		reset_control_assert(priv->rstc);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		reset_control_deassert(priv->rstc);
 	} else {
 		gpiod_set_value_cansleep(priv->reset, 0);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		gpiod_set_value_cansleep(priv->reset, 1);
 	}
 
@@ -2449,11 +2449,11 @@ mt7531_setup(struct dsa_switch *ds)
 	 */
 	if (priv->mcm) {
 		reset_control_assert(priv->rstc);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		reset_control_deassert(priv->rstc);
 	} else {
 		gpiod_set_value_cansleep(priv->reset, 0);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		gpiod_set_value_cansleep(priv->reset, 1);
 	}
 
-- 
2.43.0

[PATCH 6.7 675/713] spi: spi-imx: fix off-by-one in mx51 CPU mode burst length

[Sasha Levin]

From: Adam Butcher <adam@jessamine.co.uk>

[ Upstream commit cf6d79a0f5769b5f4d9579ddaf88d2c30b03b873 ]

c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
corrects three cases of setting the ECSPI burst length but erroneously
leaves the in-range CPU case one bit to big (in that field a value of
0 means 1 bit).  The effect was that transmissions that should have been
8-bit bytes appeared as 9-bit causing failed communication with SPI
devices.

Link: https://lore.kernel.org/all/20240201105451.507005-1-carlos.song@nxp.com/
Link: https://lore.kernel.org/all/20240204091912.36488-1-carlos.song@nxp.com/
Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Signed-off-by: Adam Butcher <adam@jessamine.co.uk>
Link: https://msgid.link/r/20240318175119.3334-1-adam@jessamine.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index e2d3e3ec13789..0e479c5406217 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -668,8 +668,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 				ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1)
 						<< MX51_ECSPI_CTRL_BL_OFFSET;
 			else
-				ctrl |= spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
-						BITS_PER_BYTE) * spi_imx->bits_per_word
+				ctrl |= (spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
+						BITS_PER_BYTE) * spi_imx->bits_per_word - 1)
 						<< MX51_ECSPI_CTRL_BL_OFFSET;
 		}
 	}
-- 
2.43.0

[PATCH 6.7 676/713] drm: Fix drm_fixp2int_round() making it add 0.5

[Sasha Levin]

From: Arthur Grillo <arthurgrillo@riseup.net>

[ Upstream commit 807f96abdf14c80f534c78f2d854c2590963345c ]

As well noted by Pekka[1], the rounding of drm_fixp2int_round is wrong.
To round a number, you need to add 0.5 to the number and floor that,
drm_fixp2int_round() is adding 0.0000076. Make it add 0.5.

[1]: https://lore.kernel.org/all/20240301135327.22efe0dd.pekka.paalanen@collabora.com/

Fixes: 8b25320887d7 ("drm: Add fixed-point helper to get rounded integer values")
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240316-drm_fixed-v2-1-c1bc2665b5ed@riseup.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_fixed.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/drm/drm_fixed.h b/include/drm/drm_fixed.h
index 0c9f917a4d4be..81572d32db0c2 100644
--- a/include/drm/drm_fixed.h
+++ b/include/drm/drm_fixed.h
@@ -71,7 +71,6 @@ static inline u32 dfixed_div(fixed20_12 A, fixed20_12 B)
 }
 
 #define DRM_FIXED_POINT		32
-#define DRM_FIXED_POINT_HALF	16
 #define DRM_FIXED_ONE		(1ULL << DRM_FIXED_POINT)
 #define DRM_FIXED_DECIMAL_MASK	(DRM_FIXED_ONE - 1)
 #define DRM_FIXED_DIGITS_MASK	(~DRM_FIXED_DECIMAL_MASK)
@@ -90,7 +89,7 @@ static inline int drm_fixp2int(s64 a)
 
 static inline int drm_fixp2int_round(s64 a)
 {
-	return drm_fixp2int(a + (1 << (DRM_FIXED_POINT_HALF - 1)));
+	return drm_fixp2int(a + DRM_FIXED_ONE / 2);
 }
 
 static inline int drm_fixp2int_ceil(s64 a)
-- 
2.43.0

[PATCH 6.7 677/713] vdpa_sim: reset must not run

[Sasha Levin]

From: Steve Sistare <steven.sistare@oracle.com>

[ Upstream commit 9588e7fc511f9c55b9835f14916e90ab940061b7 ]

vdpasim_do_reset sets running to true, which is wrong, as it allows
vdpasim_kick_vq to post work requests before the device has been
configured.  To fix, do not set running until VIRTIO_CONFIG_S_DRIVER_OK
is set.

Fixes: 0c89e2a3a9d0 ("vdpa_sim: Implement suspend vdpa op")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1707517807-137331-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index be2925d0d2836..18584ce70bf07 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -160,7 +160,7 @@ static void vdpasim_do_reset(struct vdpasim *vdpasim, u32 flags)
 		}
 	}
 
-	vdpasim->running = true;
+	vdpasim->running = false;
 	spin_unlock(&vdpasim->iommu_lock);
 
 	vdpasim->features = 0;
@@ -483,6 +483,7 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status)
 
 	mutex_lock(&vdpasim->mutex);
 	vdpasim->status = status;
+	vdpasim->running = (status & VIRTIO_CONFIG_S_DRIVER_OK) != 0;
 	mutex_unlock(&vdpasim->mutex);
 }
 
-- 
2.43.0

[PATCH 6.7 678/713] vdpa/mlx5: Allow CVQ size changes

[Sasha Levin]

From: Jonah Palmer <jonah.palmer@oracle.com>

[ Upstream commit 749a4016839270163efc36ecddddd01de491a16b ]

The MLX driver was not updating its control virtqueue size at set_vq_num
and instead always initialized to MLX5_CVQ_MAX_ENT (16) at
setup_cvq_vring.

Qemu would try to set the size to 64 by default, however, because the
CVQ size always was initialized to 16, an error would be thrown when
sending >16 control messages (as used-ring entry 17 is initialized to 0).
For example, starting a guest with x-svq=on and then executing the
following command would produce the error below:

 # for i in {1..20}; do ifconfig eth0 hw ether XX:xx:XX:xx:XX:XX; done

 qemu-system-x86_64: Insufficient written data (0)
 [  435.331223] virtio_net virtio0: Failed to set mac address by vq command.
 SIOCSIFHWADDR: Invalid argument

Acked-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240216142502.78095-1-jonah.palmer@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 26ba7da6b4106..7795d2b7fcd1c 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -145,8 +145,6 @@ static void teardown_driver(struct mlx5_vdpa_net *ndev);
 
 static bool mlx5_vdpa_debug;
 
-#define MLX5_CVQ_MAX_ENT 16
-
 #define MLX5_LOG_VIO_FLAG(_feature)                                                                \
 	do {                                                                                       \
 		if (features & BIT_ULL(_feature))                                                  \
@@ -2147,9 +2145,16 @@ static void mlx5_vdpa_set_vq_num(struct vdpa_device *vdev, u16 idx, u32 num)
 	struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
 	struct mlx5_vdpa_virtqueue *mvq;
 
-	if (!is_index_valid(mvdev, idx) || is_ctrl_vq_idx(mvdev, idx))
+	if (!is_index_valid(mvdev, idx))
 		return;
 
+        if (is_ctrl_vq_idx(mvdev, idx)) {
+                struct mlx5_control_vq *cvq = &mvdev->cvq;
+
+                cvq->vring.vring.num = num;
+                return;
+        }
+
 	mvq = &ndev->vqs[idx];
 	mvq->num_ent = num;
 }
@@ -2819,7 +2824,7 @@ static int setup_cvq_vring(struct mlx5_vdpa_dev *mvdev)
 		u16 idx = cvq->vring.last_avail_idx;
 
 		err = vringh_init_iotlb(&cvq->vring, mvdev->actual_features,
-					MLX5_CVQ_MAX_ENT, false,
+					cvq->vring.vring.num, false,
 					(struct vring_desc *)(uintptr_t)cvq->desc_addr,
 					(struct vring_avail *)(uintptr_t)cvq->driver_addr,
 					(struct vring_used *)(uintptr_t)cvq->device_addr);
-- 
2.43.0

[PATCH 6.7 679/713] virtio: packed: fix unmap leak for indirect desc table

[Sasha Levin]

From: Xuan Zhuo <xuanzhuo@linux.alibaba.com>

[ Upstream commit d5c0ed17fea60cca9bc3bf1278b49ba79242bbcd ]

When use_dma_api and premapped are true, then the do_unmap is false.

Because the do_unmap is false, vring_unmap_extra_packed is not called by
detach_buf_packed.

  if (unlikely(vq->do_unmap)) {
                curr = id;
                for (i = 0; i < state->num; i++) {
                        vring_unmap_extra_packed(vq,
                                                 &vq->packed.desc_extra[curr]);
                        curr = vq->packed.desc_extra[curr].next;
                }
  }

So the indirect desc table is not unmapped. This causes the unmap leak.

So here, we check vq->use_dma_api instead. Synchronously, dma info is
updated based on use_dma_api judgment

This bug does not occur, because no driver use the premapped with
indirect.

Fixes: b319940f83c2 ("virtio_ring: skip unmap for premapped")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20240223071833.26095-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_ring.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 49299b1f9ec74..6f7e5010a6735 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1340,7 +1340,7 @@ static int virtqueue_add_indirect_packed(struct vring_virtqueue *vq,
 				sizeof(struct vring_packed_desc));
 	vq->packed.vring.desc[head].id = cpu_to_le16(id);
 
-	if (vq->do_unmap) {
+	if (vq->use_dma_api) {
 		vq->packed.desc_extra[id].addr = addr;
 		vq->packed.desc_extra[id].len = total_sg *
 				sizeof(struct vring_packed_desc);
@@ -1481,7 +1481,7 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
 			desc[i].len = cpu_to_le32(sg->length);
 			desc[i].id = cpu_to_le16(id);
 
-			if (unlikely(vq->do_unmap)) {
+			if (unlikely(vq->use_dma_api)) {
 				vq->packed.desc_extra[curr].addr = addr;
 				vq->packed.desc_extra[curr].len = sg->length;
 				vq->packed.desc_extra[curr].flags =
@@ -1615,7 +1615,7 @@ static void detach_buf_packed(struct vring_virtqueue *vq,
 	vq->free_head = id;
 	vq->vq.num_free += state->num;
 
-	if (unlikely(vq->do_unmap)) {
+	if (unlikely(vq->use_dma_api)) {
 		curr = id;
 		for (i = 0; i < state->num; i++) {
 			vring_unmap_extra_packed(vq,
-- 
2.43.0

[PATCH 6.7 680/713] wireguard: receive: annotate data-race around receiving_counter.counter

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit bba045dc4d996d03dce6fe45726e78a1a1f6d4c3 ]

Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.

    BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll

    write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
     counter_validate drivers/net/wireguard/receive.c:321 [inline]
     wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
     __napi_poll+0x60/0x3b0 net/core/dev.c:6536
     napi_poll net/core/dev.c:6605 [inline]
     net_rx_action+0x32b/0x750 net/core/dev.c:6738
     __do_softirq+0xc4/0x279 kernel/softirq.c:553
     do_softirq+0x5e/0x90 kernel/softirq.c:454
     __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
     __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
     _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
     spin_unlock_bh include/linux/spinlock.h:396 [inline]
     ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
     wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
     process_one_work kernel/workqueue.c:2633 [inline]
     ...

    read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
     decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
     wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
     process_one_work kernel/workqueue.c:2633 [inline]
     process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
     worker_thread+0x525/0x730 kernel/workqueue.c:2787
     ...

Fixes: a9e90d9931f3 ("wireguard: noise: separate receive counter from send counter")
Reported-by: syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireguard/receive.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c
index a176653c88616..db01ec03bda00 100644
--- a/drivers/net/wireguard/receive.c
+++ b/drivers/net/wireguard/receive.c
@@ -251,7 +251,7 @@ static bool decrypt_packet(struct sk_buff *skb, struct noise_keypair *keypair)
 
 	if (unlikely(!READ_ONCE(keypair->receiving.is_valid) ||
 		  wg_birthdate_has_expired(keypair->receiving.birthdate, REJECT_AFTER_TIME) ||
-		  keypair->receiving_counter.counter >= REJECT_AFTER_MESSAGES)) {
+		  READ_ONCE(keypair->receiving_counter.counter) >= REJECT_AFTER_MESSAGES)) {
 		WRITE_ONCE(keypair->receiving.is_valid, false);
 		return false;
 	}
@@ -318,7 +318,7 @@ static bool counter_validate(struct noise_replay_counter *counter, u64 their_cou
 		for (i = 1; i <= top; ++i)
 			counter->backtrack[(i + index_current) &
 				((COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1)] = 0;
-		counter->counter = their_counter;
+		WRITE_ONCE(counter->counter, their_counter);
 	}
 
 	index &= (COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1;
@@ -463,7 +463,7 @@ int wg_packet_rx_poll(struct napi_struct *napi, int budget)
 			net_dbg_ratelimited("%s: Packet has invalid nonce %llu (max %llu)\n",
 					    peer->device->dev->name,
 					    PACKET_CB(skb)->nonce,
-					    keypair->receiving_counter.counter);
+					    READ_ONCE(keypair->receiving_counter.counter));
 			goto next;
 		}
 
-- 
2.43.0

[PATCH 6.7 681/713] rds: introduce acquire/release ordering in acquire/release_in_xmit()

[Sasha Levin]

From: Yewon Choi <woni9911@gmail.com>

[ Upstream commit 1422f28826d2a0c11e5240b3e951c9e214d8656e ]

acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).

Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.

Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/send.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/net/rds/send.c b/net/rds/send.c
index 2899def23865f..09a2801106549 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -103,13 +103,12 @@ EXPORT_SYMBOL_GPL(rds_send_path_reset);
 
 static int acquire_in_xmit(struct rds_conn_path *cp)
 {
-	return test_and_set_bit(RDS_IN_XMIT, &cp->cp_flags) == 0;
+	return test_and_set_bit_lock(RDS_IN_XMIT, &cp->cp_flags) == 0;
 }
 
 static void release_in_xmit(struct rds_conn_path *cp)
 {
-	clear_bit(RDS_IN_XMIT, &cp->cp_flags);
-	smp_mb__after_atomic();
+	clear_bit_unlock(RDS_IN_XMIT, &cp->cp_flags);
 	/*
 	 * We don't use wait_on_bit()/wake_up_bit() because our waking is in a
 	 * hot path and finding waiters is very rare.  We don't want to walk
-- 
2.43.0

[PATCH 6.7 682/713] hsr: Handle failures in module init

[Sasha Levin]

From: Felix Maurer <fmaurer@redhat.com>

[ Upstream commit 3cf28cd492308e5f63ed00b29ea03ca016264376 ]

A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.

Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_main.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/net/hsr/hsr_main.c b/net/hsr/hsr_main.c
index b099c31501509..257b50124cee5 100644
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -148,14 +148,21 @@ static struct notifier_block hsr_nb = {
 
 static int __init hsr_init(void)
 {
-	int res;
+	int err;
 
 	BUILD_BUG_ON(sizeof(struct hsr_tag) != HSR_HLEN);
 
-	register_netdevice_notifier(&hsr_nb);
-	res = hsr_netlink_init();
+	err = register_netdevice_notifier(&hsr_nb);
+	if (err)
+		return err;
+
+	err = hsr_netlink_init();
+	if (err) {
+		unregister_netdevice_notifier(&hsr_nb);
+		return err;
+	}
 
-	return res;
+	return 0;
 }
 
 static void __exit hsr_exit(void)
-- 
2.43.0

[PATCH 6.7 683/713] ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels

[Sasha Levin]

From: Tobias Brunner <tobias@strongswan.org>

[ Upstream commit c9b3b81716c5b92132a6c1d4ac3c48a7b44082ab ]

Since the referenced commit, the xfrm_inner_extract_output() function
uses the protocol field to determine the address family.  So not setting
it for IPv4 raw sockets meant that such packets couldn't be tunneled via
IPsec anymore.

IPv6 raw sockets are not affected as they already set the protocol since
9c9c9ad5fae7 ("ipv6: set skb->protocol on tcp, raw and ip6_append_data
genereated skbs").

Fixes: f4796398f21b ("xfrm: Remove inner/outer modes from output path")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/c5d9a947-eb19-4164-ac99-468ea814ce20@strongswan.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/raw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index aea89326c6979..288f1846b3518 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -350,6 +350,7 @@ static int raw_send_hdrinc(struct sock *sk, struct flowi4 *fl4,
 		goto error;
 	skb_reserve(skb, hlen);
 
+	skb->protocol = htons(ETH_P_IP);
 	skb->priority = READ_ONCE(sk->sk_priority);
 	skb->mark = sockc->mark;
 	skb->tstamp = sockc->transmit_time;
-- 
2.43.0

[PATCH 6.7 684/713] nouveau/gsp: don't check devinit disable on GSP.

[Sasha Levin]

From: Dave Airlie <airlied@redhat.com>

[ Upstream commit 5d4e8ae6e57b025802aadf55a4775c55cceb75f1 ]

GSP should be handling this and I can see no evidence in opengpu
driver that this register should be touched.

Fixed acceleration on 2080 Ti GPUs.

Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314014521.2695233-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c
index 666eb93b1742c..11b4c9c274a1a 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c
@@ -41,7 +41,6 @@ r535_devinit_new(const struct nvkm_devinit_func *hw,
 
 	rm->dtor = r535_devinit_dtor;
 	rm->post = hw->post;
-	rm->disable = hw->disable;
 
 	ret = nv50_devinit_new_(rm, device, type, inst, pdevinit);
 	if (ret)
-- 
2.43.0

[PATCH 6.7 685/713] ceph: stop copying to iter at EOF on sync reads

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit 1065da21e5df9d843d2c5165d5d576be000142a6 ]

If EOF is encountered, ceph_sync_read() return value is adjusted down
according to i_size, but the "to" iter is advanced by the actual number
of bytes read.  Then, when retrying, the remainder of the range may be
skipped incorrectly.

Ensure that the "to" iter is advanced only until EOF.

[ idryomov: changelog ]

Fixes: c3d8e0b5de48 ("ceph: return the real size read when it hits EOF")
Reported-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/file.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 3b5aae29e9447..523debc6f23e0 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1135,7 +1135,12 @@ ssize_t __ceph_sync_read(struct inode *inode, loff_t *ki_pos,
 		}
 
 		idx = 0;
-		left = ret > 0 ? ret : 0;
+		if (ret <= 0)
+			left = 0;
+		else if (off + ret > i_size)
+			left = i_size - off;
+		else
+			left = ret;
 		while (left > 0) {
 			size_t plen, copied;
 
@@ -1164,15 +1169,13 @@ ssize_t __ceph_sync_read(struct inode *inode, loff_t *ki_pos,
 	}
 
 	if (ret > 0) {
-		if (off > *ki_pos) {
-			if (off >= i_size) {
-				*retry_op = CHECK_EOF;
-				ret = i_size - *ki_pos;
-				*ki_pos = i_size;
-			} else {
-				ret = off - *ki_pos;
-				*ki_pos = off;
-			}
+		if (off >= i_size) {
+			*retry_op = CHECK_EOF;
+			ret = i_size - *ki_pos;
+			*ki_pos = i_size;
+		} else {
+			ret = off - *ki_pos;
+			*ki_pos = off;
 		}
 
 		if (last_objver)
-- 
2.43.0

[PATCH 6.7 686/713] net: phy: fix phy_read_poll_timeout argument type in genphy_loopback

[Sasha Levin]

From: Nikita Kiryushin <kiryushin@ancud.ru>

[ Upstream commit 32fa4366cc4da1c97b725a0066adf43c6b298f37 ]

read_poll_timeout inside phy_read_poll_timeout can set val negative
in some cases (for example, __mdiobus_read inside phy_read can return
-EOPNOTSUPP).

Supposedly, commit 4ec732951702 ("net: phylib: fix phy_read*_poll_timeout()")
should fix problems with wrong-signed vals, but I do not see how
as val is sent to phy_read as is and __val = phy_read (not val)
is checked for sign.

Change val type for signed to allow better error handling as done in other
phy_read_poll_timeout callers. This will not fix any error handling
by itself, but allows, for example, to modify cond with appropriate
sign check or check resulting val separately.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bbc459f97b7b0..813b753e21dec 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2701,8 +2701,8 @@ EXPORT_SYMBOL(genphy_resume);
 int genphy_loopback(struct phy_device *phydev, bool enable)
 {
 	if (enable) {
-		u16 val, ctl = BMCR_LOOPBACK;
-		int ret;
+		u16 ctl = BMCR_LOOPBACK;
+		int ret, val;
 
 		ctl |= mii_bmcr_encode_fixed(phydev->speed, phydev->duplex);
 
-- 
2.43.0

[PATCH 6.7 687/713] dm-integrity: fix a memory leak when rechecking the data

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 55e565c42dce81a4e49c13262d5bc4eb4c2e588a ]

Memory for the "checksums" pointer will leak if the data is rechecked
after checksum failure (because the associated kfree won't happen due
to 'goto skip_io').

Fix this by freeing the checksums memory before recheck, and just use
the "checksum_onstack" memory for storing checksum during recheck.

Fixes: c88f5e553fe3 ("dm-integrity: recheck the integrity tag after a failure")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-integrity.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index e8e8fc33d3440..cc834c8423bcf 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1848,12 +1848,12 @@ static void integrity_metadata(struct work_struct *w)
 			r = dm_integrity_rw_tag(ic, checksums, &dio->metadata_block, &dio->metadata_offset,
 						checksums_ptr - checksums, dio->op == REQ_OP_READ ? TAG_CMP : TAG_WRITE);
 			if (unlikely(r)) {
+				if (likely(checksums != checksums_onstack))
+					kfree(checksums);
 				if (r > 0) {
-					integrity_recheck(dio, checksums);
+					integrity_recheck(dio, checksums_onstack);
 					goto skip_io;
 				}
-				if (likely(checksums != checksums_onstack))
-					kfree(checksums);
 				goto error;
 			}
 
-- 
2.43.0

[PATCH 6.7 688/713] net/bnx2x: Prevent access to a freed page in page_pool

[Sasha Levin]

From: Thinh Tran <thinhtr@linux.ibm.com>

[ Upstream commit d27e2da94a42655861ca4baea30c8cd65546f25d ]

Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index d8b1824c334d3..0bc1367fd6492 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1002,9 +1002,6 @@ static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid,
 static inline void bnx2x_free_rx_mem_pool(struct bnx2x *bp,
 					  struct bnx2x_alloc_pool *pool)
 {
-	if (!pool->page)
-		return;
-
 	put_page(pool->page);
 
 	pool->page = NULL;
@@ -1015,6 +1012,9 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
 {
 	int i;
 
+	if (!fp->page_pool.page)
+		return;
+
 	if (fp->mode == TPA_MODE_DISABLED)
 		return;
 
-- 
2.43.0

[PATCH 6.7 689/713] devlink: fix port new reply cmd type

[Sasha Levin]

From: Jiri Pirko <jiri@nvidia.com>

[ Upstream commit 78a2f5e6c15d8dcbd6495bb9635c7cb89235dfc5 ]

Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value.

Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d96 ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/devlink/port.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/devlink/port.c b/net/devlink/port.c
index d39ee6053cc7b..2b3c2b1a3eb37 100644
--- a/net/devlink/port.c
+++ b/net/devlink/port.c
@@ -887,7 +887,7 @@ int devlink_nl_port_new_doit(struct sk_buff *skb, struct genl_info *info)
 		err = -ENOMEM;
 		goto err_out_port_del;
 	}
-	err = devlink_nl_port_fill(msg, devlink_port, DEVLINK_CMD_NEW,
+	err = devlink_nl_port_fill(msg, devlink_port, DEVLINK_CMD_PORT_NEW,
 				   info->snd_portid, info->snd_seq, 0, NULL);
 	if (WARN_ON_ONCE(err))
 		goto err_out_msg_free;
-- 
2.43.0

[PATCH 6.7 690/713] octeontx2: Detect the mbox up or down message via register

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit a88e0f936ba9a301c78f6eacfd38737d003c130b ]

A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.

Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/marvell/octeontx2/af/mbox.c  |  43 ++++++-
 .../net/ethernet/marvell/octeontx2/af/mbox.h  |   6 +
 .../marvell/octeontx2/af/mcs_rvu_if.c         |  17 ++-
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |  14 ++-
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |   2 +
 .../ethernet/marvell/octeontx2/af/rvu_cgx.c   |  20 ++--
 .../marvell/octeontx2/nic/otx2_common.h       |   2 +-
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 113 ++++++++++++------
 .../ethernet/marvell/octeontx2/nic/otx2_vf.c  |  71 ++++++-----
 9 files changed, 205 insertions(+), 83 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.c b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
index 9690ac01f02c8..7d741e3ba8c51 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
@@ -214,11 +214,12 @@ int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid)
 }
 EXPORT_SYMBOL(otx2_mbox_busy_poll_for_rsp);
 
-void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
+static void otx2_mbox_msg_send_data(struct otx2_mbox *mbox, int devid, u64 data)
 {
 	struct otx2_mbox_dev *mdev = &mbox->dev[devid];
 	struct mbox_hdr *tx_hdr, *rx_hdr;
 	void *hw_mbase = mdev->hwbase;
+	u64 intr_val;
 
 	tx_hdr = hw_mbase + mbox->tx_start;
 	rx_hdr = hw_mbase + mbox->rx_start;
@@ -254,14 +255,52 @@ void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
 
 	spin_unlock(&mdev->mbox_lock);
 
+	/* Check if interrupt pending */
+	intr_val = readq((void __iomem *)mbox->reg_base +
+		     (mbox->trigger | (devid << mbox->tr_shift)));
+
+	intr_val |= data;
 	/* The interrupt should be fired after num_msgs is written
 	 * to the shared memory
 	 */
-	writeq(1, (void __iomem *)mbox->reg_base +
+	writeq(intr_val, (void __iomem *)mbox->reg_base +
 	       (mbox->trigger | (devid << mbox->tr_shift)));
 }
+
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
+{
+	otx2_mbox_msg_send_data(mbox, devid, MBOX_DOWN_MSG);
+}
 EXPORT_SYMBOL(otx2_mbox_msg_send);
 
+void otx2_mbox_msg_send_up(struct otx2_mbox *mbox, int devid)
+{
+	otx2_mbox_msg_send_data(mbox, devid, MBOX_UP_MSG);
+}
+EXPORT_SYMBOL(otx2_mbox_msg_send_up);
+
+bool otx2_mbox_wait_for_zero(struct otx2_mbox *mbox, int devid)
+{
+	u64 data;
+
+	data = readq((void __iomem *)mbox->reg_base +
+		     (mbox->trigger | (devid << mbox->tr_shift)));
+
+	/* If data is non-zero wait for ~1ms and return to caller
+	 * whether data has changed to zero or not after the wait.
+	 */
+	if (!data)
+		return true;
+
+	usleep_range(950, 1000);
+
+	data = readq((void __iomem *)mbox->reg_base +
+		     (mbox->trigger | (devid << mbox->tr_shift)));
+
+	return data == 0;
+}
+EXPORT_SYMBOL(otx2_mbox_wait_for_zero);
+
 struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
 					    int size, int size_rsp)
 {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 5df42634ceb84..bd4b9661ee373 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -16,6 +16,9 @@
 
 #define MBOX_SIZE		SZ_64K
 
+#define MBOX_DOWN_MSG		1
+#define MBOX_UP_MSG		2
+
 /* AF/PF: PF initiated, PF/VF VF initiated */
 #define MBOX_DOWN_RX_START	0
 #define MBOX_DOWN_RX_SIZE	(46 * SZ_1K)
@@ -101,6 +104,7 @@ int otx2_mbox_regions_init(struct otx2_mbox *mbox, void __force **hwbase,
 			   struct pci_dev *pdev, void __force *reg_base,
 			   int direction, int ndevs, unsigned long *bmap);
 void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid);
+void otx2_mbox_msg_send_up(struct otx2_mbox *mbox, int devid);
 int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid);
 int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid);
 struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
@@ -118,6 +122,8 @@ static inline struct mbox_msghdr *otx2_mbox_alloc_msg(struct otx2_mbox *mbox,
 	return otx2_mbox_alloc_msg_rsp(mbox, devid, size, 0);
 }
 
+bool otx2_mbox_wait_for_zero(struct otx2_mbox *mbox, int devid);
+
 /* Mailbox message types */
 #define MBOX_MSG_MASK				0xFFFF
 #define MBOX_MSG_INVALID			0xFFFE
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c
index dfd23580e3b8e..d39d86e694ccf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c
@@ -121,13 +121,17 @@ int mcs_add_intr_wq_entry(struct mcs *mcs, struct mcs_intr_event *event)
 static int mcs_notify_pfvf(struct mcs_intr_event *event, struct rvu *rvu)
 {
 	struct mcs_intr_info *req;
-	int err, pf;
+	int pf;
 
 	pf = rvu_get_pf(event->pcifunc);
 
+	mutex_lock(&rvu->mbox_lock);
+
 	req = otx2_mbox_alloc_msg_mcs_intr_notify(rvu, pf);
-	if (!req)
+	if (!req) {
+		mutex_unlock(&rvu->mbox_lock);
 		return -ENOMEM;
+	}
 
 	req->mcs_id = event->mcs_id;
 	req->intr_mask = event->intr_mask;
@@ -135,10 +139,11 @@ static int mcs_notify_pfvf(struct mcs_intr_event *event, struct rvu *rvu)
 	req->hdr.pcifunc = event->pcifunc;
 	req->lmac_id = event->lmac_id;
 
-	otx2_mbox_msg_send(&rvu->afpf_wq_info.mbox_up, pf);
-	err = otx2_mbox_wait_for_rsp(&rvu->afpf_wq_info.mbox_up, pf);
-	if (err)
-		dev_warn(rvu->dev, "MCS notification to pf %d failed\n", pf);
+	otx2_mbox_wait_for_zero(&rvu->afpf_wq_info.mbox_up, pf);
+
+	otx2_mbox_msg_send_up(&rvu->afpf_wq_info.mbox_up, pf);
+
+	mutex_unlock(&rvu->mbox_lock);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 731bb82b577c2..d82aa6f12f114 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2114,7 +2114,7 @@ MBOX_MESSAGES
 	}
 }
 
-static void __rvu_mbox_handler(struct rvu_work *mwork, int type)
+static void __rvu_mbox_handler(struct rvu_work *mwork, int type, bool poll)
 {
 	struct rvu *rvu = mwork->rvu;
 	int offset, err, id, devid;
@@ -2181,6 +2181,9 @@ static void __rvu_mbox_handler(struct rvu_work *mwork, int type)
 	}
 	mw->mbox_wrk[devid].num_msgs = 0;
 
+	if (poll)
+		otx2_mbox_wait_for_zero(mbox, devid);
+
 	/* Send mbox responses to VF/PF */
 	otx2_mbox_msg_send(mbox, devid);
 }
@@ -2188,15 +2191,18 @@ static void __rvu_mbox_handler(struct rvu_work *mwork, int type)
 static inline void rvu_afpf_mbox_handler(struct work_struct *work)
 {
 	struct rvu_work *mwork = container_of(work, struct rvu_work, work);
+	struct rvu *rvu = mwork->rvu;
 
-	__rvu_mbox_handler(mwork, TYPE_AFPF);
+	mutex_lock(&rvu->mbox_lock);
+	__rvu_mbox_handler(mwork, TYPE_AFPF, true);
+	mutex_unlock(&rvu->mbox_lock);
 }
 
 static inline void rvu_afvf_mbox_handler(struct work_struct *work)
 {
 	struct rvu_work *mwork = container_of(work, struct rvu_work, work);
 
-	__rvu_mbox_handler(mwork, TYPE_AFVF);
+	__rvu_mbox_handler(mwork, TYPE_AFVF, false);
 }
 
 static void __rvu_mbox_up_handler(struct rvu_work *mwork, int type)
@@ -2371,6 +2377,8 @@ static int rvu_mbox_init(struct rvu *rvu, struct mbox_wq_info *mw,
 		}
 	}
 
+	mutex_init(&rvu->mbox_lock);
+
 	mbox_regions = kcalloc(num, sizeof(void *), GFP_KERNEL);
 	if (!mbox_regions) {
 		err = -ENOMEM;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 8802961b8889f..185c296eaaf0d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -551,6 +551,8 @@ struct rvu {
 	spinlock_t		mcs_intrq_lock;
 	/* CPT interrupt lock */
 	spinlock_t		cpt_intr_lock;
+
+	struct mutex		mbox_lock; /* Serialize mbox up and down msgs */
 };
 
 static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index 38acdc7a73bbe..72e060cf6b618 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -232,7 +232,7 @@ static void cgx_notify_pfs(struct cgx_link_event *event, struct rvu *rvu)
 	struct cgx_link_user_info *linfo;
 	struct cgx_link_info_msg *msg;
 	unsigned long pfmap;
-	int err, pfid;
+	int pfid;
 
 	linfo = &event->link_uinfo;
 	pfmap = cgxlmac_to_pfmap(rvu, event->cgx_id, event->lmac_id);
@@ -255,16 +255,22 @@ static void cgx_notify_pfs(struct cgx_link_event *event, struct rvu *rvu)
 			continue;
 		}
 
+		mutex_lock(&rvu->mbox_lock);
+
 		/* Send mbox message to PF */
 		msg = otx2_mbox_alloc_msg_cgx_link_event(rvu, pfid);
-		if (!msg)
+		if (!msg) {
+			mutex_unlock(&rvu->mbox_lock);
 			continue;
+		}
+
 		msg->link_info = *linfo;
-		otx2_mbox_msg_send(&rvu->afpf_wq_info.mbox_up, pfid);
-		err = otx2_mbox_wait_for_rsp(&rvu->afpf_wq_info.mbox_up, pfid);
-		if (err)
-			dev_warn(rvu->dev, "notification to pf %d failed\n",
-				 pfid);
+
+		otx2_mbox_wait_for_zero(&rvu->afpf_wq_info.mbox_up, pfid);
+
+		otx2_mbox_msg_send_up(&rvu->afpf_wq_info.mbox_up, pfid);
+
+		mutex_unlock(&rvu->mbox_lock);
 	} while (pfmap);
 }
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 06910307085ef..7e16a341ec588 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -815,7 +815,7 @@ static inline int otx2_sync_mbox_up_msg(struct mbox *mbox, int devid)
 
 	if (!otx2_mbox_nonempty(&mbox->mbox_up, devid))
 		return 0;
-	otx2_mbox_msg_send(&mbox->mbox_up, devid);
+	otx2_mbox_msg_send_up(&mbox->mbox_up, devid);
 	err = otx2_mbox_wait_for_rsp(&mbox->mbox_up, devid);
 	if (err)
 		return err;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index e5fe67e738655..3c8841b35d0f7 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -292,8 +292,8 @@ static int otx2_pf_flr_init(struct otx2_nic *pf, int num_vfs)
 	return 0;
 }
 
-static void otx2_queue_work(struct mbox *mw, struct workqueue_struct *mbox_wq,
-			    int first, int mdevs, u64 intr, int type)
+static void otx2_queue_vf_work(struct mbox *mw, struct workqueue_struct *mbox_wq,
+			       int first, int mdevs, u64 intr)
 {
 	struct otx2_mbox_dev *mdev;
 	struct otx2_mbox *mbox;
@@ -307,40 +307,26 @@ static void otx2_queue_work(struct mbox *mw, struct workqueue_struct *mbox_wq,
 
 		mbox = &mw->mbox;
 		mdev = &mbox->dev[i];
-		if (type == TYPE_PFAF)
-			otx2_sync_mbox_bbuf(mbox, i);
 		hdr = mdev->mbase + mbox->rx_start;
 		/* The hdr->num_msgs is set to zero immediately in the interrupt
-		 * handler to  ensure that it holds a correct value next time
-		 * when the interrupt handler is called.
-		 * pf->mbox.num_msgs holds the data for use in pfaf_mbox_handler
-		 * pf>mbox.up_num_msgs holds the data for use in
-		 * pfaf_mbox_up_handler.
+		 * handler to ensure that it holds a correct value next time
+		 * when the interrupt handler is called. pf->mw[i].num_msgs
+		 * holds the data for use in otx2_pfvf_mbox_handler and
+		 * pf->mw[i].up_num_msgs holds the data for use in
+		 * otx2_pfvf_mbox_up_handler.
 		 */
 		if (hdr->num_msgs) {
 			mw[i].num_msgs = hdr->num_msgs;
 			hdr->num_msgs = 0;
-			if (type == TYPE_PFAF)
-				memset(mbox->hwbase + mbox->rx_start, 0,
-				       ALIGN(sizeof(struct mbox_hdr),
-					     sizeof(u64)));
-
 			queue_work(mbox_wq, &mw[i].mbox_wrk);
 		}
 
 		mbox = &mw->mbox_up;
 		mdev = &mbox->dev[i];
-		if (type == TYPE_PFAF)
-			otx2_sync_mbox_bbuf(mbox, i);
 		hdr = mdev->mbase + mbox->rx_start;
 		if (hdr->num_msgs) {
 			mw[i].up_num_msgs = hdr->num_msgs;
 			hdr->num_msgs = 0;
-			if (type == TYPE_PFAF)
-				memset(mbox->hwbase + mbox->rx_start, 0,
-				       ALIGN(sizeof(struct mbox_hdr),
-					     sizeof(u64)));
-
 			queue_work(mbox_wq, &mw[i].mbox_up_wrk);
 		}
 	}
@@ -356,8 +342,10 @@ static void otx2_forward_msg_pfvf(struct otx2_mbox_dev *mdev,
 	/* Msgs are already copied, trigger VF's mbox irq */
 	smp_wmb();
 
+	otx2_mbox_wait_for_zero(pfvf_mbox, devid);
+
 	offset = pfvf_mbox->trigger | (devid << pfvf_mbox->tr_shift);
-	writeq(1, (void __iomem *)pfvf_mbox->reg_base + offset);
+	writeq(MBOX_DOWN_MSG, (void __iomem *)pfvf_mbox->reg_base + offset);
 
 	/* Restore VF's mbox bounce buffer region address */
 	src_mdev->mbase = bbuf_base;
@@ -547,7 +535,7 @@ static void otx2_pfvf_mbox_up_handler(struct work_struct *work)
 end:
 		offset = mbox->rx_start + msg->next_msgoff;
 		if (mdev->msgs_acked == (vf_mbox->up_num_msgs - 1))
-			__otx2_mbox_reset(mbox, 0);
+			__otx2_mbox_reset(mbox, vf_idx);
 		mdev->msgs_acked++;
 	}
 }
@@ -564,8 +552,7 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq)
 	if (vfs > 64) {
 		intr = otx2_read64(pf, RVU_PF_VFPF_MBOX_INTX(1));
 		otx2_write64(pf, RVU_PF_VFPF_MBOX_INTX(1), intr);
-		otx2_queue_work(mbox, pf->mbox_pfvf_wq, 64, vfs, intr,
-				TYPE_PFVF);
+		otx2_queue_vf_work(mbox, pf->mbox_pfvf_wq, 64, vfs, intr);
 		if (intr)
 			trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr);
 		vfs = 64;
@@ -574,7 +561,7 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq)
 	intr = otx2_read64(pf, RVU_PF_VFPF_MBOX_INTX(0));
 	otx2_write64(pf, RVU_PF_VFPF_MBOX_INTX(0), intr);
 
-	otx2_queue_work(mbox, pf->mbox_pfvf_wq, 0, vfs, intr, TYPE_PFVF);
+	otx2_queue_vf_work(mbox, pf->mbox_pfvf_wq, 0, vfs, intr);
 
 	if (intr)
 		trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr);
@@ -821,20 +808,22 @@ static void otx2_pfaf_mbox_handler(struct work_struct *work)
 	struct mbox *af_mbox;
 	struct otx2_nic *pf;
 	int offset, id;
+	u16 num_msgs;
 
 	af_mbox = container_of(work, struct mbox, mbox_wrk);
 	mbox = &af_mbox->mbox;
 	mdev = &mbox->dev[0];
 	rsp_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+	num_msgs = rsp_hdr->num_msgs;
 
 	offset = mbox->rx_start + ALIGN(sizeof(*rsp_hdr), MBOX_MSG_ALIGN);
 	pf = af_mbox->pfvf;
 
-	for (id = 0; id < af_mbox->num_msgs; id++) {
+	for (id = 0; id < num_msgs; id++) {
 		msg = (struct mbox_msghdr *)(mdev->mbase + offset);
 		otx2_process_pfaf_mbox_msg(pf, msg);
 		offset = mbox->rx_start + msg->next_msgoff;
-		if (mdev->msgs_acked == (af_mbox->num_msgs - 1))
+		if (mdev->msgs_acked == (num_msgs - 1))
 			__otx2_mbox_reset(mbox, 0);
 		mdev->msgs_acked++;
 	}
@@ -945,12 +934,14 @@ static void otx2_pfaf_mbox_up_handler(struct work_struct *work)
 	int offset, id, devid = 0;
 	struct mbox_hdr *rsp_hdr;
 	struct mbox_msghdr *msg;
+	u16 num_msgs;
 
 	rsp_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+	num_msgs = rsp_hdr->num_msgs;
 
 	offset = mbox->rx_start + ALIGN(sizeof(*rsp_hdr), MBOX_MSG_ALIGN);
 
-	for (id = 0; id < af_mbox->up_num_msgs; id++) {
+	for (id = 0; id < num_msgs; id++) {
 		msg = (struct mbox_msghdr *)(mdev->mbase + offset);
 
 		devid = msg->pcifunc & RVU_PFVF_FUNC_MASK;
@@ -959,10 +950,11 @@ static void otx2_pfaf_mbox_up_handler(struct work_struct *work)
 			otx2_process_mbox_msg_up(pf, msg);
 		offset = mbox->rx_start + msg->next_msgoff;
 	}
-	if (devid) {
+	/* Forward to VF iff VFs are really present */
+	if (devid && pci_num_vf(pf->pdev)) {
 		otx2_forward_vf_mbox_msgs(pf, &pf->mbox.mbox_up,
 					  MBOX_DIR_PFVF_UP, devid - 1,
-					  af_mbox->up_num_msgs);
+					  num_msgs);
 		return;
 	}
 
@@ -972,16 +964,49 @@ static void otx2_pfaf_mbox_up_handler(struct work_struct *work)
 static irqreturn_t otx2_pfaf_mbox_intr_handler(int irq, void *pf_irq)
 {
 	struct otx2_nic *pf = (struct otx2_nic *)pf_irq;
-	struct mbox *mbox;
+	struct mbox *mw = &pf->mbox;
+	struct otx2_mbox_dev *mdev;
+	struct otx2_mbox *mbox;
+	struct mbox_hdr *hdr;
+	u64 mbox_data;
 
 	/* Clear the IRQ */
 	otx2_write64(pf, RVU_PF_INT, BIT_ULL(0));
 
-	mbox = &pf->mbox;
 
-	trace_otx2_msg_interrupt(mbox->mbox.pdev, "AF to PF", BIT_ULL(0));
+	mbox_data = otx2_read64(pf, RVU_PF_PFAF_MBOX0);
+
+	if (mbox_data & MBOX_UP_MSG) {
+		mbox_data &= ~MBOX_UP_MSG;
+		otx2_write64(pf, RVU_PF_PFAF_MBOX0, mbox_data);
+
+		mbox = &mw->mbox_up;
+		mdev = &mbox->dev[0];
+		otx2_sync_mbox_bbuf(mbox, 0);
+
+		hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+		if (hdr->num_msgs)
+			queue_work(pf->mbox_wq, &mw->mbox_up_wrk);
+
+		trace_otx2_msg_interrupt(pf->pdev, "UP message from AF to PF",
+					 BIT_ULL(0));
+	}
+
+	if (mbox_data & MBOX_DOWN_MSG) {
+		mbox_data &= ~MBOX_DOWN_MSG;
+		otx2_write64(pf, RVU_PF_PFAF_MBOX0, mbox_data);
+
+		mbox = &mw->mbox;
+		mdev = &mbox->dev[0];
+		otx2_sync_mbox_bbuf(mbox, 0);
+
+		hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+		if (hdr->num_msgs)
+			queue_work(pf->mbox_wq, &mw->mbox_wrk);
 
-	otx2_queue_work(mbox, pf->mbox_wq, 0, 1, 1, TYPE_PFAF);
+		trace_otx2_msg_interrupt(pf->pdev, "DOWN reply from AF to PF",
+					 BIT_ULL(0));
+	}
 
 	return IRQ_HANDLED;
 }
@@ -3087,6 +3112,7 @@ static void otx2_vf_link_event_task(struct work_struct *work)
 	struct otx2_vf_config *config;
 	struct cgx_link_info_msg *req;
 	struct mbox_msghdr *msghdr;
+	struct delayed_work *dwork;
 	struct otx2_nic *pf;
 	int vf_idx;
 
@@ -3095,10 +3121,21 @@ static void otx2_vf_link_event_task(struct work_struct *work)
 	vf_idx = config - config->pf->vf_configs;
 	pf = config->pf;
 
+	mutex_lock(&pf->mbox.lock);
+
+	dwork = &config->link_event_work;
+
+	if (!otx2_mbox_wait_for_zero(&pf->mbox_pfvf[0].mbox_up, vf_idx)) {
+		schedule_delayed_work(dwork, msecs_to_jiffies(100));
+		mutex_unlock(&pf->mbox.lock);
+		return;
+	}
+
 	msghdr = otx2_mbox_alloc_msg_rsp(&pf->mbox_pfvf[0].mbox_up, vf_idx,
 					 sizeof(*req), sizeof(struct msg_rsp));
 	if (!msghdr) {
 		dev_err(pf->dev, "Failed to create VF%d link event\n", vf_idx);
+		mutex_unlock(&pf->mbox.lock);
 		return;
 	}
 
@@ -3107,7 +3144,11 @@ static void otx2_vf_link_event_task(struct work_struct *work)
 	req->hdr.sig = OTX2_MBOX_REQ_SIG;
 	memcpy(&req->link_info, &pf->linfo, sizeof(req->link_info));
 
-	otx2_sync_mbox_up_msg(&pf->mbox_pfvf[0], vf_idx);
+	otx2_mbox_wait_for_zero(&pf->mbox_pfvf[0].mbox_up, vf_idx);
+
+	otx2_mbox_msg_send_up(&pf->mbox_pfvf[0].mbox_up, vf_idx);
+
+	mutex_unlock(&pf->mbox.lock);
 }
 
 static int otx2_sriov_enable(struct pci_dev *pdev, int numvfs)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 35e06048356f4..ced456cec8baf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -89,16 +89,20 @@ static void otx2vf_vfaf_mbox_handler(struct work_struct *work)
 	struct otx2_mbox *mbox;
 	struct mbox *af_mbox;
 	int offset, id;
+	u16 num_msgs;
 
 	af_mbox = container_of(work, struct mbox, mbox_wrk);
 	mbox = &af_mbox->mbox;
 	mdev = &mbox->dev[0];
 	rsp_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
-	if (af_mbox->num_msgs == 0)
+	num_msgs = rsp_hdr->num_msgs;
+
+	if (num_msgs == 0)
 		return;
+
 	offset = mbox->rx_start + ALIGN(sizeof(*rsp_hdr), MBOX_MSG_ALIGN);
 
-	for (id = 0; id < af_mbox->num_msgs; id++) {
+	for (id = 0; id < num_msgs; id++) {
 		msg = (struct mbox_msghdr *)(mdev->mbase + offset);
 		otx2vf_process_vfaf_mbox_msg(af_mbox->pfvf, msg);
 		offset = mbox->rx_start + msg->next_msgoff;
@@ -151,6 +155,7 @@ static void otx2vf_vfaf_mbox_up_handler(struct work_struct *work)
 	struct mbox *vf_mbox;
 	struct otx2_nic *vf;
 	int offset, id;
+	u16 num_msgs;
 
 	vf_mbox = container_of(work, struct mbox, mbox_up_wrk);
 	vf = vf_mbox->pfvf;
@@ -158,12 +163,14 @@ static void otx2vf_vfaf_mbox_up_handler(struct work_struct *work)
 	mdev = &mbox->dev[0];
 
 	rsp_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
-	if (vf_mbox->up_num_msgs == 0)
+	num_msgs = rsp_hdr->num_msgs;
+
+	if (num_msgs == 0)
 		return;
 
 	offset = mbox->rx_start + ALIGN(sizeof(*rsp_hdr), MBOX_MSG_ALIGN);
 
-	for (id = 0; id < vf_mbox->up_num_msgs; id++) {
+	for (id = 0; id < num_msgs; id++) {
 		msg = (struct mbox_msghdr *)(mdev->mbase + offset);
 		otx2vf_process_mbox_msg_up(vf, msg);
 		offset = mbox->rx_start + msg->next_msgoff;
@@ -178,40 +185,48 @@ static irqreturn_t otx2vf_vfaf_mbox_intr_handler(int irq, void *vf_irq)
 	struct otx2_mbox_dev *mdev;
 	struct otx2_mbox *mbox;
 	struct mbox_hdr *hdr;
+	u64 mbox_data;
 
 	/* Clear the IRQ */
 	otx2_write64(vf, RVU_VF_INT, BIT_ULL(0));
 
+	mbox_data = otx2_read64(vf, RVU_VF_VFPF_MBOX0);
+
 	/* Read latest mbox data */
 	smp_rmb();
 
-	/* Check for PF => VF response messages */
-	mbox = &vf->mbox.mbox;
-	mdev = &mbox->dev[0];
-	otx2_sync_mbox_bbuf(mbox, 0);
+	if (mbox_data & MBOX_DOWN_MSG) {
+		mbox_data &= ~MBOX_DOWN_MSG;
+		otx2_write64(vf, RVU_VF_VFPF_MBOX0, mbox_data);
+
+		/* Check for PF => VF response messages */
+		mbox = &vf->mbox.mbox;
+		mdev = &mbox->dev[0];
+		otx2_sync_mbox_bbuf(mbox, 0);
 
-	trace_otx2_msg_interrupt(mbox->pdev, "PF to VF", BIT_ULL(0));
+		hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+		if (hdr->num_msgs)
+			queue_work(vf->mbox_wq, &vf->mbox.mbox_wrk);
 
-	hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
-	if (hdr->num_msgs) {
-		vf->mbox.num_msgs = hdr->num_msgs;
-		hdr->num_msgs = 0;
-		memset(mbox->hwbase + mbox->rx_start, 0,
-		       ALIGN(sizeof(struct mbox_hdr), sizeof(u64)));
-		queue_work(vf->mbox_wq, &vf->mbox.mbox_wrk);
+		trace_otx2_msg_interrupt(mbox->pdev, "DOWN reply from PF to VF",
+					 BIT_ULL(0));
 	}
-	/* Check for PF => VF notification messages */
-	mbox = &vf->mbox.mbox_up;
-	mdev = &mbox->dev[0];
-	otx2_sync_mbox_bbuf(mbox, 0);
-
-	hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
-	if (hdr->num_msgs) {
-		vf->mbox.up_num_msgs = hdr->num_msgs;
-		hdr->num_msgs = 0;
-		memset(mbox->hwbase + mbox->rx_start, 0,
-		       ALIGN(sizeof(struct mbox_hdr), sizeof(u64)));
-		queue_work(vf->mbox_wq, &vf->mbox.mbox_up_wrk);
+
+	if (mbox_data & MBOX_UP_MSG) {
+		mbox_data &= ~MBOX_UP_MSG;
+		otx2_write64(vf, RVU_VF_VFPF_MBOX0, mbox_data);
+
+		/* Check for PF => VF notification messages */
+		mbox = &vf->mbox.mbox_up;
+		mdev = &mbox->dev[0];
+		otx2_sync_mbox_bbuf(mbox, 0);
+
+		hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+		if (hdr->num_msgs)
+			queue_work(vf->mbox_wq, &vf->mbox.mbox_up_wrk);
+
+		trace_otx2_msg_interrupt(mbox->pdev, "UP message from PF to VF",
+					 BIT_ULL(0));
 	}
 
 	return IRQ_HANDLED;
-- 
2.43.0

[PATCH 6.7 691/713] octeontx2-pf: Wait till detach_resources msg is complete

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit cbf2f24939a5dafce6de4dd4422e543ce8f610cf ]

During VF driver remove, a message is sent to detach VF
resources to PF but VF is not waiting until message is
complete. Also mailbox interrupts need to be turned off
after the detach resource message is complete. This patch
fixes that problem.

Fixes: 05fcc9e08955 ("octeontx2-pf: Attach NIX and NPA block LFs")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 2 +-
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 02d0b707aea5b..a85ac039d779b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -1592,7 +1592,7 @@ int otx2_detach_resources(struct mbox *mbox)
 	detach->partial = false;
 
 	/* Send detach request to AF */
-	otx2_mbox_msg_send(&mbox->mbox, 0);
+	otx2_sync_mbox_msg(mbox);
 	mutex_unlock(&mbox->lock);
 	return 0;
 }
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index ced456cec8baf..cf0aa16d75407 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -775,8 +775,8 @@ static void otx2vf_remove(struct pci_dev *pdev)
 	otx2_mcam_flow_del(vf);
 	otx2_shutdown_tc(vf);
 	otx2_shutdown_qos(vf);
-	otx2vf_disable_mbox_intr(vf);
 	otx2_detach_resources(&vf->mbox);
+	otx2vf_disable_mbox_intr(vf);
 	free_percpu(vf->hw.lmt_info);
 	if (test_bit(CN10K_LMTST, &vf->hw.cap_flag))
 		qmem_free(vf->dev, vf->dync_lmt);
-- 
2.43.0

[PATCH 6.7 692/713] octeontx2-pf: Use default max_active works instead of one

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit 7558ce0d974ced1dc07edc1197f750fe28c52e57 ]

Only one execution context for the workqueue used for PF and
VFs mailbox communication is incorrect since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Hence use default number of execution contexts by passing zero
as max_active to alloc_workqueue function. With this fix in place,
modify UP messages also to wait until completion.

Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 3c8841b35d0f7..f85d38fab3211 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -584,8 +584,9 @@ static int otx2_pfvf_mbox_init(struct otx2_nic *pf, int numvfs)
 	if (!pf->mbox_pfvf)
 		return -ENOMEM;
 
-	pf->mbox_pfvf_wq = alloc_ordered_workqueue("otx2_pfvf_mailbox",
-						   WQ_HIGHPRI | WQ_MEM_RECLAIM);
+	pf->mbox_pfvf_wq = alloc_workqueue("otx2_pfvf_mailbox",
+					   WQ_UNBOUND | WQ_HIGHPRI |
+					   WQ_MEM_RECLAIM, 0);
 	if (!pf->mbox_pfvf_wq)
 		return -ENOMEM;
 
@@ -3146,7 +3147,7 @@ static void otx2_vf_link_event_task(struct work_struct *work)
 
 	otx2_mbox_wait_for_zero(&pf->mbox_pfvf[0].mbox_up, vf_idx);
 
-	otx2_mbox_msg_send_up(&pf->mbox_pfvf[0].mbox_up, vf_idx);
+	otx2_sync_mbox_up_msg(&pf->mbox_pfvf[0], vf_idx);
 
 	mutex_unlock(&pf->mbox.lock);
 }
-- 
2.43.0

[PATCH 6.7 693/713] octeontx2-pf: Send UP messages to VF only when VF is up.

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit dfcf6355f53b1796cf7fd50a4f27b18ee6a3497a ]

When PF sending link status messages to VF, it is possible
that by the time link_event_task work function is executed
VF might have brought down. Hence before sending VF link
status message check whether VF is up to receive it.

Fixes: ad513ed938c9 ("octeontx2-vf: Link event notification support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index f85d38fab3211..b40bd0e467514 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -3122,6 +3122,9 @@ static void otx2_vf_link_event_task(struct work_struct *work)
 	vf_idx = config - config->pf->vf_configs;
 	pf = config->pf;
 
+	if (config->intf_down)
+		return;
+
 	mutex_lock(&pf->mbox.lock);
 
 	dwork = &config->link_event_work;
-- 
2.43.0

[PATCH 6.7 694/713] octeontx2-af: Use separate handlers for interrupts

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit 50e60de381c342008c0956fd762e1c26408f372c ]

For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.

Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index d82aa6f12f114..32645aefd5934 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2528,10 +2528,9 @@ static void rvu_queue_work(struct mbox_wq_info *mw, int first,
 	}
 }
 
-static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
+static irqreturn_t rvu_mbox_pf_intr_handler(int irq, void *rvu_irq)
 {
 	struct rvu *rvu = (struct rvu *)rvu_irq;
-	int vfs = rvu->vfs;
 	u64 intr;
 
 	intr = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_PFAF_MBOX_INT);
@@ -2545,6 +2544,18 @@ static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
 
 	rvu_queue_work(&rvu->afpf_wq_info, 0, rvu->hw->total_pfs, intr);
 
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
+{
+	struct rvu *rvu = (struct rvu *)rvu_irq;
+	int vfs = rvu->vfs;
+	u64 intr;
+
+	/* Sync with mbox memory region */
+	rmb();
+
 	/* Handle VF interrupts */
 	if (vfs > 64) {
 		intr = rvupf_read64(rvu, RVU_PF_VFPF_MBOX_INTX(1));
@@ -2882,7 +2893,7 @@ static int rvu_register_interrupts(struct rvu *rvu)
 	/* Register mailbox interrupt handler */
 	sprintf(&rvu->irq_name[RVU_AF_INT_VEC_MBOX * NAME_SIZE], "RVUAF Mbox");
 	ret = request_irq(pci_irq_vector(rvu->pdev, RVU_AF_INT_VEC_MBOX),
-			  rvu_mbox_intr_handler, 0,
+			  rvu_mbox_pf_intr_handler, 0,
 			  &rvu->irq_name[RVU_AF_INT_VEC_MBOX * NAME_SIZE], rvu);
 	if (ret) {
 		dev_err(rvu->dev,
-- 
2.43.0

[PATCH 6.7 695/713] drm/amdgpu: add MMHUB 3.3.1 support

[Sasha Levin]

From: Yifan Zhang <yifan1.zhang@amd.com>

[ Upstream commit 31e0a586f3385134bcad00d8194eb0728cb1a17d ]

This patch to add MMHUB 3.3.1 support.

v2: squash in fault info fix (Alex)

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6540ff6482c1 ("drm/amdgpu: fix mmhub client id out-of-bounds access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c  | 1 +
 drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
index c9c653cfc765b..3f1692194b7ad 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
@@ -570,6 +570,7 @@ static void gmc_v11_0_set_mmhub_funcs(struct amdgpu_device *adev)
 		adev->mmhub.funcs = &mmhub_v3_0_2_funcs;
 		break;
 	case IP_VERSION(3, 3, 0):
+	case IP_VERSION(3, 3, 1):
 		adev->mmhub.funcs = &mmhub_v3_3_funcs;
 		break;
 	default:
diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
index dc4812ecc98d6..b3961968c10c4 100644
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
@@ -98,6 +98,7 @@ mmhub_v3_3_print_l2_protection_fault_status(struct amdgpu_device *adev,
 
 	switch (amdgpu_ip_version(adev, MMHUB_HWIP, 0)) {
 	case IP_VERSION(3, 3, 0):
+	case IP_VERSION(3, 3, 1):
 		mmhub_cid = mmhub_client_ids_v3_3[cid][rw];
 		break;
 	default:
-- 
2.43.0

[PATCH 6.7 696/713] drm/amdgpu: fix mmhub client id out-of-bounds access

[Sasha Levin]

From: Lang Yu <Lang.Yu@amd.com>

[ Upstream commit 6540ff6482c1a5a6890ae44b23d0852ba1986d9e ]

Properly handle cid 0x140.

Fixes: aba2be41470a ("drm/amdgpu: add mmhub 3.3.0 support")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
index b3961968c10c4..238ea40c24500 100644
--- a/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v3_3.c
@@ -99,16 +99,15 @@ mmhub_v3_3_print_l2_protection_fault_status(struct amdgpu_device *adev,
 	switch (amdgpu_ip_version(adev, MMHUB_HWIP, 0)) {
 	case IP_VERSION(3, 3, 0):
 	case IP_VERSION(3, 3, 1):
-		mmhub_cid = mmhub_client_ids_v3_3[cid][rw];
+		mmhub_cid = cid < ARRAY_SIZE(mmhub_client_ids_v3_3) ?
+			    mmhub_client_ids_v3_3[cid][rw] :
+			    cid == 0x140 ? "UMSCH" : NULL;
 		break;
 	default:
 		mmhub_cid = NULL;
 		break;
 	}
 
-	if (!mmhub_cid && cid == 0x140)
-		mmhub_cid = "UMSCH";
-
 	dev_err(adev->dev, "\t Faulty UTCL2 client ID: %s (0x%x)\n",
 		mmhub_cid ? mmhub_cid : "unknown", cid);
 	dev_err(adev->dev, "\t MORE_FAULTS: 0x%lx\n",
-- 
2.43.0

[PATCH 6.7 697/713] drm/amdgpu: drop setting buffer funcs in sdma442

[Sasha Levin]

From: Le Ma <le.ma@amd.com>

[ Upstream commit ad550dbe8ae4ba833371a018265c1c3ae88559f0 ]

To fix the entity rq NULL issue. This setting has been moved
to upper level.

Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level")
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 23 +----------------------
 1 file changed, 1 insertion(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
index 0f24af6f28102..8eed9a73d0355 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c
@@ -429,16 +429,11 @@ static void sdma_v4_4_2_inst_gfx_stop(struct amdgpu_device *adev,
 	struct amdgpu_ring *sdma[AMDGPU_MAX_SDMA_INSTANCES];
 	u32 doorbell_offset, doorbell;
 	u32 rb_cntl, ib_cntl;
-	int i, unset = 0;
+	int i;
 
 	for_each_inst(i, inst_mask) {
 		sdma[i] = &adev->sdma.instance[i].ring;
 
-		if ((adev->mman.buffer_funcs_ring == sdma[i]) && unset != 1) {
-			amdgpu_ttm_set_buffer_funcs_status(adev, false);
-			unset = 1;
-		}
-
 		rb_cntl = RREG32_SDMA(i, regSDMA_GFX_RB_CNTL);
 		rb_cntl = REG_SET_FIELD(rb_cntl, SDMA_GFX_RB_CNTL, RB_ENABLE, 0);
 		WREG32_SDMA(i, regSDMA_GFX_RB_CNTL, rb_cntl);
@@ -485,20 +480,10 @@ static void sdma_v4_4_2_inst_rlc_stop(struct amdgpu_device *adev,
 static void sdma_v4_4_2_inst_page_stop(struct amdgpu_device *adev,
 				       uint32_t inst_mask)
 {
-	struct amdgpu_ring *sdma[AMDGPU_MAX_SDMA_INSTANCES];
 	u32 rb_cntl, ib_cntl;
 	int i;
-	bool unset = false;
 
 	for_each_inst(i, inst_mask) {
-		sdma[i] = &adev->sdma.instance[i].page;
-
-		if ((adev->mman.buffer_funcs_ring == sdma[i]) &&
-			(!unset)) {
-			amdgpu_ttm_set_buffer_funcs_status(adev, false);
-			unset = true;
-		}
-
 		rb_cntl = RREG32_SDMA(i, regSDMA_PAGE_RB_CNTL);
 		rb_cntl = REG_SET_FIELD(rb_cntl, SDMA_PAGE_RB_CNTL,
 					RB_ENABLE, 0);
@@ -948,13 +933,7 @@ static int sdma_v4_4_2_inst_start(struct amdgpu_device *adev,
 			r = amdgpu_ring_test_helper(page);
 			if (r)
 				return r;
-
-			if (adev->mman.buffer_funcs_ring == page)
-				amdgpu_ttm_set_buffer_funcs_status(adev, true);
 		}
-
-		if (adev->mman.buffer_funcs_ring == ring)
-			amdgpu_ttm_set_buffer_funcs_status(adev, true);
 	}
 
 	return r;
-- 
2.43.0

[PATCH 6.7 698/713] riscv: Fix syscall wrapper for >word-size arguments

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit a9ad73295cc1e3af0253eee7d08943b2419444c4 ]

The current syscall wrapper macros break 64-bit arguments on
rv32 because they only guarantee the first N input registers are
passed to syscalls that accept N arguments. According to the
calling convention, values twice the word size reside in register
pairs and as a result, syscall arguments don't always have a
direct register mapping on rv32.

Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the
type of the `__se(_compat)_sys_*` functions on rv32, change the
function declarations to accept `ulong` arguments and alias them
to the actual syscall implementations, similarly to the existing
macros in include/linux/syscalls.h. This matches previous
behavior and ensures registers are passed to syscalls as-is, no
matter which argument types they expect.

Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/syscall_wrapper.h | 53 +++++++++++++++++-------
 1 file changed, 39 insertions(+), 14 deletions(-)

diff --git a/arch/riscv/include/asm/syscall_wrapper.h b/arch/riscv/include/asm/syscall_wrapper.h
index eeec04b7dae67..980094c2e9761 100644
--- a/arch/riscv/include/asm/syscall_wrapper.h
+++ b/arch/riscv/include/asm/syscall_wrapper.h
@@ -12,25 +12,51 @@
 
 asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *);
 
-#define SC_RISCV_REGS_TO_ARGS(x, ...)				\
-	__MAP(x,__SC_ARGS					\
-	      ,,regs->orig_a0,,regs->a1,,regs->a2		\
+#ifdef CONFIG_64BIT
+
+#define __SYSCALL_SE_DEFINEx(x, prefix, name, ...)					\
+	static long __se_##prefix##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
+	static long __se_##prefix##name(__MAP(x,__SC_LONG,__VA_ARGS__))
+
+#define SC_RISCV_REGS_TO_ARGS(x, ...)							\
+	__MAP(x,__SC_ARGS								\
+	      ,,regs->orig_a0,,regs->a1,,regs->a2					\
 	      ,,regs->a3,,regs->a4,,regs->a5,,regs->a6)
 
+#else
+/*
+ * Use type aliasing to ensure registers a0-a6 are correctly passed to the syscall
+ * implementation when >word-size arguments are used.
+ */
+#define __SYSCALL_SE_DEFINEx(x, prefix, name, ...)					\
+	__diag_push();									\
+	__diag_ignore(GCC, 8, "-Wattribute-alias",					\
+			"Type aliasing is used to sanitize syscall arguments");		\
+	static long __se_##prefix##name(ulong, ulong, ulong, ulong, ulong, ulong, 	\
+					ulong)						\
+			__attribute__((alias(__stringify(___se_##prefix##name))));	\
+	__diag_pop();									\
+	static long noinline ___se_##prefix##name(__MAP(x,__SC_LONG,__VA_ARGS__));	\
+	static long ___se_##prefix##name(__MAP(x,__SC_LONG,__VA_ARGS__))
+
+#define SC_RISCV_REGS_TO_ARGS(x, ...) \
+	regs->orig_a0,regs->a1,regs->a2,regs->a3,regs->a4,regs->a5,regs->a6
+
+#endif /* CONFIG_64BIT */
+
 #ifdef CONFIG_COMPAT
 
 #define COMPAT_SYSCALL_DEFINEx(x, name, ...)						\
 	asmlinkage long __riscv_compat_sys##name(const struct pt_regs *regs);		\
 	ALLOW_ERROR_INJECTION(__riscv_compat_sys##name, ERRNO);				\
-	static long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
 	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
-	asmlinkage long __riscv_compat_sys##name(const struct pt_regs *regs)		\
+	__SYSCALL_SE_DEFINEx(x, compat_sys, name, __VA_ARGS__)				\
 	{										\
-		return __se_compat_sys##name(SC_RISCV_REGS_TO_ARGS(x,__VA_ARGS__));	\
+		return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));	\
 	}										\
-	static long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))		\
+	asmlinkage long __riscv_compat_sys##name(const struct pt_regs *regs)		\
 	{										\
-		return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));	\
+		return __se_compat_sys##name(SC_RISCV_REGS_TO_ARGS(x,__VA_ARGS__));	\
 	}										\
 	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
 
@@ -51,19 +77,18 @@ asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *);
 #define __SYSCALL_DEFINEx(x, name, ...)						\
 	asmlinkage long __riscv_sys##name(const struct pt_regs *regs);		\
 	ALLOW_ERROR_INJECTION(__riscv_sys##name, ERRNO);			\
-	static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
 	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
-	asmlinkage long __riscv_sys##name(const struct pt_regs *regs)		\
-	{									\
-		return __se_sys##name(SC_RISCV_REGS_TO_ARGS(x,__VA_ARGS__));	\
-	}									\
-	static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))		\
+	__SYSCALL_SE_DEFINEx(x, sys, name, __VA_ARGS__)				\
 	{									\
 		long ret = __do_sys##name(__MAP(x,__SC_CAST,__VA_ARGS__));	\
 		__MAP(x,__SC_TEST,__VA_ARGS__);					\
 		__PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__));		\
 		return ret;							\
 	}									\
+	asmlinkage long __riscv_sys##name(const struct pt_regs *regs)		\
+	{									\
+		return __se_sys##name(SC_RISCV_REGS_TO_ARGS(x,__VA_ARGS__));	\
+	}									\
 	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
 
 #define SYSCALL_DEFINE0(sname)							\
-- 
2.43.0

[PATCH 6.7 699/713] netfilter: nft_set_pipapo: release elements in clone only from destroy path

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit b0e256f3dd2ba6532f37c5c22e07cb07a36031ee ]

Clone already always provides a current view of the lookup table, use it
to destroy the set, otherwise it is possible to destroy elements twice.

This fix requires:

 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")

which came after:

 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path").

Fixes: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_pipapo.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index 3089c4ca8fff3..abf659cb2d91f 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -2244,8 +2244,6 @@ static void nft_pipapo_destroy(const struct nft_ctx *ctx,
 	if (m) {
 		rcu_barrier();
 
-		nft_set_pipapo_match_destroy(ctx, set, m);
-
 		for_each_possible_cpu(cpu)
 			pipapo_free_scratch(m, cpu);
 		free_percpu(m->scratch);
@@ -2257,8 +2255,7 @@ static void nft_pipapo_destroy(const struct nft_ctx *ctx,
 	if (priv->clone) {
 		m = priv->clone;
 
-		if (priv->dirty)
-			nft_set_pipapo_match_destroy(ctx, set, m);
+		nft_set_pipapo_match_destroy(ctx, set, m);
 
 		for_each_possible_cpu(cpu)
 			pipapo_free_scratch(priv->clone, cpu);
-- 
2.43.0

[PATCH 6.7 700/713] netfilter: nf_tables: do not compare internal table flags on updates

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 4a0e7f2decbf9bd72461226f1f5f7dcc4b08f139 ]

Restore skipping transaction if table update does not modify flags.

Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 79e088e6f103e..85d9e1394330c 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1211,7 +1211,7 @@ static int nf_tables_updtable(struct nft_ctx *ctx)
 	if (flags & ~NFT_TABLE_F_MASK)
 		return -EOPNOTSUPP;
 
-	if (flags == ctx->table->flags)
+	if (flags == (ctx->table->flags & NFT_TABLE_F_MASK))
 		return 0;
 
 	if ((nft_table_has_owner(ctx->table) &&
-- 
2.43.0

[PATCH 6.7 701/713] rcu: add a helper to report consolidated flavor QS

[Sasha Levin]

From: Yan Zhai <yan@cloudflare.com>

[ Upstream commit 1a77557d48cff187a169c2aec01c0dd78a5e7e50 ]

When under heavy load, network processing can run CPU-bound for many
tens of seconds. Even in preemptible kernels (non-RT kernel), this can
block RCU Tasks grace periods, which can cause trace-event removal to
take more than a minute, which is unacceptably long.

This commit therefore creates a new helper function that passes through
both RCU and RCU-Tasks quiescent states every 100 milliseconds. This
hard-coded value suffices for current workloads.

Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d6dbbb11247c ("net: report RCU QS on threaded NAPI repolling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/rcupdate.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 31d523c4e0893..e1bb04e578d8a 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -250,6 +250,37 @@ do { \
 	cond_resched(); \
 } while (0)
 
+/**
+ * rcu_softirq_qs_periodic - Report RCU and RCU-Tasks quiescent states
+ * @old_ts: jiffies at start of processing.
+ *
+ * This helper is for long-running softirq handlers, such as NAPI threads in
+ * networking. The caller should initialize the variable passed in as @old_ts
+ * at the beginning of the softirq handler. When invoked frequently, this macro
+ * will invoke rcu_softirq_qs() every 100 milliseconds thereafter, which will
+ * provide both RCU and RCU-Tasks quiescent states. Note that this macro
+ * modifies its old_ts argument.
+ *
+ * Because regions of code that have disabled softirq act as RCU read-side
+ * critical sections, this macro should be invoked with softirq (and
+ * preemption) enabled.
+ *
+ * The macro is not needed when CONFIG_PREEMPT_RT is defined. RT kernels would
+ * have more chance to invoke schedule() calls and provide necessary quiescent
+ * states. As a contrast, calling cond_resched() only won't achieve the same
+ * effect because cond_resched() does not provide RCU-Tasks quiescent states.
+ */
+#define rcu_softirq_qs_periodic(old_ts) \
+do { \
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && \
+	    time_after(jiffies, (old_ts) + HZ / 10)) { \
+		preempt_disable(); \
+		rcu_softirq_qs(); \
+		preempt_enable(); \
+		(old_ts) = jiffies; \
+	} \
+} while (0)
+
 /*
  * Infrastructure to implement the synchronize_() primitives in
  * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
-- 
2.43.0

[PATCH 6.7 702/713] net: report RCU QS on threaded NAPI repolling

[Sasha Levin]

From: Yan Zhai <yan@cloudflare.com>

[ Upstream commit d6dbbb11247c71203785a2c9da474c36f4b19eae ]

NAPI threads can keep polling packets under load. Currently it is only
calling cond_resched() before repolling, but it is not sufficient to
clear out the holdout of RCU tasks, which prevent BPF tracing programs
from detaching for long period. This can be reproduced easily with
following set up:

ip netns add test1
ip netns add test2

ip -n test1 link add veth1 type veth peer name veth2 netns test2

ip -n test1 link set veth1 up
ip -n test1 link set lo up
ip -n test2 link set veth2 up
ip -n test2 link set lo up

ip -n test1 addr add 192.168.1.2/31 dev veth1
ip -n test1 addr add 1.1.1.1/32 dev lo
ip -n test2 addr add 192.168.1.3/31 dev veth2
ip -n test2 addr add 2.2.2.2/31 dev lo

ip -n test1 route add default via 192.168.1.3
ip -n test2 route add default via 192.168.1.2

for i in `seq 10 210`; do
 for j in `seq 10 210`; do
    ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201
 done
done

ip netns exec test2 ethtool -K veth2 gro on
ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded'
ip netns exec test1 ethtool -K veth1 tso off

Then run an iperf3 client/server and a bpftrace script can trigger it:

ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null&
ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null&
bpftrace -e 'kfunc:__napi_poll{@=count();} interval:s:1{exit();}'

Report RCU quiescent states periodically will resolve the issue.

Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/4c3b0d3f32d3b18949d75b18e5e1d9f13a24f025.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/core/dev.c b/net/core/dev.c
index ae898594690f7..e3c06ccf21d03 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6668,6 +6668,8 @@ static int napi_threaded_poll(void *data)
 	void *have;
 
 	while (!napi_thread_wait(napi)) {
+		unsigned long last_qs = jiffies;
+
 		for (;;) {
 			bool repoll = false;
 
@@ -6692,6 +6694,7 @@ static int napi_threaded_poll(void *data)
 			if (!repoll)
 				break;
 
+			rcu_softirq_qs_periodic(last_qs);
 			cond_resched();
 		}
 	}
-- 
2.43.0

[PATCH 6.7 703/713] bpf: report RCU QS in cpumap kthread

[Sasha Levin]

From: Yan Zhai <yan@cloudflare.com>

[ Upstream commit 00bf63122459e87193ee7f1bc6161c83a525569f ]

When there are heavy load, cpumap kernel threads can be busy polling
packets from redirect queues and block out RCU tasks from reaching
quiescent states. It is insufficient to just call cond_resched() in such
context. Periodically raise a consolidated RCU QS before cond_resched
fixes the problem.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/c17b9f1517e19d813da3ede5ed33ee18496bb5d8.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/cpumap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index ef82ffc90cbe9..8f1d390bcbdeb 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -262,6 +262,7 @@ static int cpu_map_bpf_prog_run(struct bpf_cpu_map_entry *rcpu, void **frames,
 static int cpu_map_kthread_run(void *data)
 {
 	struct bpf_cpu_map_entry *rcpu = data;
+	unsigned long last_qs = jiffies;
 
 	complete(&rcpu->kthread_running);
 	set_current_state(TASK_INTERRUPTIBLE);
@@ -287,10 +288,12 @@ static int cpu_map_kthread_run(void *data)
 			if (__ptr_ring_empty(rcpu->queue)) {
 				schedule();
 				sched = 1;
+				last_qs = jiffies;
 			} else {
 				__set_current_state(TASK_RUNNING);
 			}
 		} else {
+			rcu_softirq_qs_periodic(last_qs);
 			sched = cond_resched();
 		}
 
-- 
2.43.0

[PATCH 6.7 704/713] net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports

[Sasha Levin]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit e8bf353577f382c7066c661fed41b2adc0fc7c40 ]

Whether VLAN-aware or not, on every VID VLAN table entry that has the CPU
port as a member of it, frames are set to egress the CPU port with the VLAN
tag stacked. This is so that VLAN tags can be appended after hardware
special tag (called DSA tag in the context of Linux drivers).

For user ports on a VLAN-unaware bridge, frame ingressing the user port
egresses CPU port with only the special tag.

For user ports on a VLAN-aware bridge, frame ingressing the user port
egresses CPU port with the special tag and the VLAN tag.

This causes issues with link-local frames, specifically BPDUs, because the
software expects to receive them VLAN-untagged.

There are two options to make link-local frames egress untagged. Setting
CONSISTENT or UNTAGGED on the EG_TAG bits on the relevant register.
CONSISTENT means frames egress exactly as they ingress. That means
egressing with the VLAN tag they had at ingress or egressing untagged if
they ingressed untagged. Although link-local frames are not supposed to be
transmitted VLAN-tagged, if they are done so, when egressing through a CPU
port, the special tag field will be broken.

BPDU egresses CPU port with VLAN tag egressing stacked, received on
software:

00:01:25.104821 AF Unknown (382365846), length 106:
                                     | STAG  | | VLAN  |
        0x0000:  0000 6c27 614d 4143 0001 0000 8100 0001  ..l'aMAC........
        0x0010:  0026 4242 0300 0000 0000 0000 6c27 614d  .&BB........l'aM
        0x0020:  4143 0000 0000 0000 6c27 614d 4143 0000  AC......l'aMAC..
        0x0030:  0000 1400 0200 0f00 0000 0000 0000 0000  ................

BPDU egresses CPU port with VLAN tag egressing untagged, received on
software:

00:23:56.628708 AF Unknown (25215488), length 64:
                                     | STAG  |
        0x0000:  0000 6c27 614d 4143 0001 0000 0026 4242  ..l'aMAC.....&BB
        0x0010:  0300 0000 0000 0000 6c27 614d 4143 0000  ........l'aMAC..
        0x0020:  0000 0000 6c27 614d 4143 0000 0000 1400  ....l'aMAC......
        0x0030:  0200 0f00 0000 0000 0000 0000            ............

BPDU egresses CPU port with VLAN tag egressing tagged, received on
software:

00:01:34.311963 AF Unknown (25215488), length 64:
                                     | Mess  |
        0x0000:  0000 6c27 614d 4143 0001 0001 0026 4242  ..l'aMAC.....&BB
        0x0010:  0300 0000 0000 0000 6c27 614d 4143 0000  ........l'aMAC..
        0x0020:  0000 0000 6c27 614d 4143 0000 0000 1400  ....l'aMAC......
        0x0030:  0200 0f00 0000 0000 0000 0000            ............

To prevent confusing the software, force the frame to egress UNTAGGED
instead of CONSISTENT. This way, frames can't possibly be received TAGGED
by software which would have the special tag field broken.

VLAN Tag Egress Procedure

   For all frames, one of these options set the earliest in this order will
   apply to the frame:

   - EG_TAG in certain registers for certain frames.
     This will apply to frame with matching MAC DA or EtherType.

   - EG_TAG in the address table.
     This will apply to frame at its incoming port.

   - EG_TAG in the PVC register.
     This will apply to frame at its incoming port.

   - EG_CON and [EG_TAG per port] in the VLAN table.
     This will apply to frame at its outgoing port.

   - EG_TAG in the PCR register.
     This will apply to frame at its outgoing port.

   EG_TAG in certain registers for certain frames:

   PPPoE Discovery_ARP/RARP: PPP_EG_TAG and ARP_EG_TAG in the APC register.
   IGMP_MLD: IGMP_EG_TAG and MLD_EG_TAG in the IMC register.
   BPDU and PAE: BPDU_EG_TAG and PAE_EG_TAG in the BPC register.
   REV_01 and REV_02: R01_EG_TAG and R02_EG_TAG in the RGAC1 register.
   REV_03 and REV_0E: R03_EG_TAG and R0E_EG_TAG in the RGAC2 register.
   REV_10 and REV_20: R10_EG_TAG and R20_EG_TAG in the RGAC3 register.
   REV_21 and REV_UN: R21_EG_TAG and RUN_EG_TAG in the RGAC4 register.

With this change, it can be observed that a bridge interface with stp_state
and vlan_filtering enabled will properly block ports now.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 23 +++++++++++++++--------
 drivers/net/dsa/mt7530.h |  9 ++++++++-
 2 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 940ca59585568..f5b2535307652 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1001,16 +1001,23 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 static void
 mt753x_trap_frames(struct mt7530_priv *priv)
 {
-	/* Trap BPDUs to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+	/* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
+	 * VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
+		   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+		   MT753X_BPDU_PORT_FW_MASK,
+		   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
 		   MT753X_BPDU_CPU_ONLY);
 
-	/* Trap 802.1X PAE frames to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_PORT_FW_MASK,
-		   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY));
-
-	/* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
+	/* Trap LLDP frames with :0E MAC DA to the CPU port(s) and egress them
+	 * VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
+		   MT753X_R0E_PORT_FW_MASK,
+		   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
 		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
 }
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 17e42d30fff4b..cef2af3f24d58 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -65,12 +65,18 @@ enum mt753x_id {
 
 /* Registers for BPDU and PAE frame control*/
 #define MT753X_BPC			0x24
-#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
+#define  MT753X_PAE_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_PAE_EG_TAG(x)		FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
 #define  MT753X_PAE_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_PAE_PORT_FW(x)		FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
+#define  MT753X_BPDU_EG_TAG_MASK	GENMASK(8, 6)
+#define  MT753X_BPDU_EG_TAG(x)		FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
+#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
 
 /* Register for :03 and :0E MAC DA frame control */
 #define MT753X_RGAC2			0x2c
+#define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
 #define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
 
@@ -253,6 +259,7 @@ enum mt7530_port_mode {
 enum mt7530_vlan_port_eg_tag {
 	MT7530_VLAN_EG_DISABLED = 0,
 	MT7530_VLAN_EG_CONSISTENT = 1,
+	MT7530_VLAN_EG_UNTAGGED = 4,
 };
 
 enum mt7530_vlan_port_attr {
-- 
2.43.0

[PATCH 6.7 705/713] net: dsa: mt7530: fix handling of all link-local frames

[Sasha Levin]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit 69ddba9d170bdaee1dc0eb4ced38d7e4bb7b92af ]

Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as
regular multicast frames, therefore flooding them to user ports.

On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE
Std 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC
DA must only be propagated to C-VLAN and MAC Bridge components. That means
VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
these frames are supposed to be processed by the CPU (software). So we make
the switch only forward them to the CPU port. And if received from a CPU
port, forward to a single port. The software is responsible of making the
switch conform to the latter by setting a single port as destination port
on the special tag.

This switch intellectual property cannot conform to this part of the
standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and
:0F MAC DAs, it also includes :22-FF which the scope of propagation is not
supposed to be restricted for these MAC DAs.

Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a
comment for the remaining MAC DAs.

Note that the ingress port must have a PVID assigned to it for the switch
to forward untagged frames. A PVID is set by default on VLAN-aware and
VLAN-unaware ports. However, when the network interface that pertains to
the ingress port is attached to a vlan_filtering enabled bridge, the user
can remove the PVID assignment from it which would prevent the link-local
frames from being trapped to the CPU port. I am yet to see a way to forward
link-local frames while preventing other untagged frames from being
forwarded too.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 37 +++++++++++++++++++++++++++++++++----
 drivers/net/dsa/mt7530.h | 13 +++++++++++++
 2 files changed, 46 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index f5b2535307652..e6b8bf6035565 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -998,6 +998,21 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 	mutex_unlock(&priv->reg_mutex);
 }
 
+/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
+ * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
+ * must only be propagated to C-VLAN and MAC Bridge components. That means
+ * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
+ * these frames are supposed to be processed by the CPU (software). So we make
+ * the switch only forward them to the CPU port. And if received from a CPU
+ * port, forward to a single port. The software is responsible of making the
+ * switch conform to the latter by setting a single port as destination port on
+ * the special tag.
+ *
+ * This switch intellectual property cannot conform to this part of the standard
+ * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
+ * DAs, it also includes :22-FF which the scope of propagation is not supposed
+ * to be restricted for these MAC DAs.
+ */
 static void
 mt753x_trap_frames(struct mt7530_priv *priv)
 {
@@ -1012,13 +1027,27 @@ mt753x_trap_frames(struct mt7530_priv *priv)
 		   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
 		   MT753X_BPDU_CPU_ONLY);
 
-	/* Trap LLDP frames with :0E MAC DA to the CPU port(s) and egress them
-	 * VLAN-untagged.
+	/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+	 * them VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
+		   MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
+		   MT753X_R01_PORT_FW_MASK,
+		   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_BPDU_CPU_ONLY);
+
+	/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+	 * them VLAN-untagged.
 	 */
 	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
-		   MT753X_R0E_PORT_FW_MASK,
+		   MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
+		   MT753X_R03_PORT_FW_MASK,
 		   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
+		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_BPDU_CPU_ONLY);
 }
 
 static int
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index cef2af3f24d58..75bc9043c8c0a 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -73,12 +73,25 @@ enum mt753x_id {
 #define  MT753X_BPDU_EG_TAG(x)		FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
 #define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
 
+/* Register for :01 and :02 MAC DA frame control */
+#define MT753X_RGAC1			0x28
+#define  MT753X_R02_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_R02_EG_TAG(x)		FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+#define  MT753X_R02_PORT_FW_MASK	GENMASK(18, 16)
+#define  MT753X_R02_PORT_FW(x)		FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+#define  MT753X_R01_EG_TAG_MASK		GENMASK(8, 6)
+#define  MT753X_R01_EG_TAG(x)		FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+#define  MT753X_R01_PORT_FW_MASK	GENMASK(2, 0)
+
 /* Register for :03 and :0E MAC DA frame control */
 #define MT753X_RGAC2			0x2c
 #define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
 #define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
 #define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+#define  MT753X_R03_EG_TAG_MASK		GENMASK(8, 6)
+#define  MT753X_R03_EG_TAG(x)		FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+#define  MT753X_R03_PORT_FW_MASK	GENMASK(2, 0)
 
 enum mt753x_bpdu_port_fw {
 	MT753X_BPDU_FOLLOW_MFC,
-- 
2.43.0

[PATCH 6.7 706/713] netfilter: nf_tables: Fix a memory leak in nf_tables_updchain

[Sasha Levin]

From: Quan Tian <tianquan23@gmail.com>

[ Upstream commit 7eaf837a4eb5f74561e2486972e7f5184b613f6e ]

If nft_netdev_register_hooks() fails, the memory associated with
nft_stats is not freed, causing a memory leak.

This patch fixes it by moving nft_stats_alloc() down after
nft_netdev_register_hooks() succeeds.

Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Quan Tian <tianquan23@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 85d9e1394330c..0130c2782cdc7 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2619,19 +2619,6 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy,
 		}
 	}
 
-	if (nla[NFTA_CHAIN_COUNTERS]) {
-		if (!nft_is_base_chain(chain)) {
-			err = -EOPNOTSUPP;
-			goto err_hooks;
-		}
-
-		stats = nft_stats_alloc(nla[NFTA_CHAIN_COUNTERS]);
-		if (IS_ERR(stats)) {
-			err = PTR_ERR(stats);
-			goto err_hooks;
-		}
-	}
-
 	if (!(table->flags & NFT_TABLE_F_DORMANT) &&
 	    nft_is_base_chain(chain) &&
 	    !list_empty(&hook.list)) {
@@ -2646,6 +2633,20 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy,
 	}
 
 	unregister = true;
+
+	if (nla[NFTA_CHAIN_COUNTERS]) {
+		if (!nft_is_base_chain(chain)) {
+			err = -EOPNOTSUPP;
+			goto err_hooks;
+		}
+
+		stats = nft_stats_alloc(nla[NFTA_CHAIN_COUNTERS]);
+		if (IS_ERR(stats)) {
+			err = PTR_ERR(stats);
+			goto err_hooks;
+		}
+	}
+
 	err = -ENOMEM;
 	trans = nft_trans_alloc(ctx, NFT_MSG_NEWCHAIN,
 				sizeof(struct nft_trans_chain));
-- 
2.43.0

[PATCH 6.7 707/713] spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

[Sasha Levin]

From: Fei Shao <fshao@chromium.org>

[ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ]

The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.

Add a check to trans->tx_buf before using it.

Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 8d5d170d49cc4..109dac2e69df2 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -787,17 +787,19 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(host);
 
-		cnt = mdata->xfer_len / 4;
-		iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
-				trans->tx_buf + mdata->num_xfered, cnt);
+		if (trans->tx_buf) {
+			cnt = mdata->xfer_len / 4;
+			iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+					trans->tx_buf + mdata->num_xfered, cnt);
 
-		remainder = mdata->xfer_len % 4;
-		if (remainder > 0) {
-			reg_val = 0;
-			memcpy(&reg_val,
-				trans->tx_buf + (cnt * 4) + mdata->num_xfered,
-				remainder);
-			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			remainder = mdata->xfer_len % 4;
+			if (remainder > 0) {
+				reg_val = 0;
+				memcpy(&reg_val,
+					trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+					remainder);
+				writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			}
 		}
 
 		mtk_spi_enable_transfer(host);
-- 
2.43.0

[PATCH 6.7 708/713] selftests: forwarding: Fix ping failure due to short timeout

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit e4137851d4863a9bdc6aabc613bcb46c06d91e64 ]

The tests send 100 pings in 0.1 second intervals and force a timeout of
11 seconds, which is borderline (especially on debug kernels), resulting
in random failures in netdev CI [1].

Fix by increasing the timeout to 20 seconds. It should not prolong the
test unless something is wrong, in which case the test will rightfully
fail.

[1]
 # selftests: net/forwarding: vxlan_bridge_1d_port_8472_ipv6.sh
 # INFO: Running tests with UDP port 8472
 # TEST: ping: local->local                                            [ OK ]
 # TEST: ping: local->remote 1                                         [FAIL]
 # Ping failed
 [...]

Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Fixes: 728b35259e28 ("selftests: forwarding: Add VxLAN tests with a VLAN-aware bridge for IPv6")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/netdev/24a7051fdcd1f156c3704bca39e4b3c41dfc7c4b.camel@redhat.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240320065717.4145325-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh  | 4 ++--
 .../testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
index ac97f07e5ce82..bd3f7d492af2b 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
@@ -354,7 +354,7 @@ __ping_ipv4()
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome ARP noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
@@ -410,7 +410,7 @@ __ping_ipv6()
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome neighbor discovery noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping6_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 100
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
index d880df89bc8bd..e83fde79f40d0 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
@@ -457,7 +457,7 @@ __ping_ipv4()
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome ARP noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
@@ -522,7 +522,7 @@ __ping_ipv6()
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome neighbor discovery noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping6_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 100
-- 
2.43.0

[PATCH 6.7 709/713] dm io: Support IO priority

[Sasha Levin]

From: Hongyu Jin <hongyu.jin@unisoc.com>

[ Upstream commit 6e5f0f6383b4896c7e9b943d84b136149d0f45e9 ]

Some IO will dispatch from kworker with different io_context settings
than the submitting task, we may need to specify a priority to avoid
losing priority.

Add IO priority parameter to dm_io() and update all callers.

Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Stable-dep-of: b4d78cfeb304 ("dm-integrity: align the outgoing bio in integrity_recheck")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-bufio.c           |  6 +++---
 drivers/md/dm-integrity.c       | 12 ++++++------
 drivers/md/dm-io.c              | 23 +++++++++++++----------
 drivers/md/dm-kcopyd.c          |  4 ++--
 drivers/md/dm-log.c             |  4 ++--
 drivers/md/dm-raid1.c           |  6 +++---
 drivers/md/dm-snap-persistent.c |  4 ++--
 drivers/md/dm-verity-target.c   |  2 +-
 drivers/md/dm-writecache.c      |  8 ++++----
 include/linux/dm-io.h           |  3 ++-
 10 files changed, 38 insertions(+), 34 deletions(-)

diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index f03d7dba270c5..4f2808ef387f6 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -1315,7 +1315,7 @@ static void use_dmio(struct dm_buffer *b, enum req_op op, sector_t sector,
 		io_req.mem.ptr.vma = (char *)b->data + offset;
 	}
 
-	r = dm_io(&io_req, 1, &region, NULL);
+	r = dm_io(&io_req, 1, &region, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r))
 		b->end_io(b, errno_to_blk_status(r));
 }
@@ -2167,7 +2167,7 @@ int dm_bufio_issue_flush(struct dm_bufio_client *c)
 	if (WARN_ON_ONCE(dm_bufio_in_request()))
 		return -EINVAL;
 
-	return dm_io(&io_req, 1, &io_reg, NULL);
+	return dm_io(&io_req, 1, &io_reg, NULL, IOPRIO_DEFAULT);
 }
 EXPORT_SYMBOL_GPL(dm_bufio_issue_flush);
 
@@ -2191,7 +2191,7 @@ int dm_bufio_issue_discard(struct dm_bufio_client *c, sector_t block, sector_t c
 	if (WARN_ON_ONCE(dm_bufio_in_request()))
 		return -EINVAL; /* discards are optional */
 
-	return dm_io(&io_req, 1, &io_reg, NULL);
+	return dm_io(&io_req, 1, &io_reg, NULL, IOPRIO_DEFAULT);
 }
 EXPORT_SYMBOL_GPL(dm_bufio_issue_discard);
 
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index cc834c8423bcf..ec8df735077fe 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -555,7 +555,7 @@ static int sync_rw_sb(struct dm_integrity_c *ic, blk_opf_t opf)
 		}
 	}
 
-	r = dm_io(&io_req, 1, &io_loc, NULL);
+	r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r))
 		return r;
 
@@ -1073,7 +1073,7 @@ static void rw_journal_sectors(struct dm_integrity_c *ic, blk_opf_t opf,
 	io_loc.sector = ic->start + SB_SECTORS + sector;
 	io_loc.count = n_sectors;
 
-	r = dm_io(&io_req, 1, &io_loc, NULL);
+	r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r)) {
 		dm_integrity_io_error(ic, (opf & REQ_OP_MASK) == REQ_OP_READ ?
 				      "reading journal" : "writing journal", r);
@@ -1190,7 +1190,7 @@ static void copy_from_journal(struct dm_integrity_c *ic, unsigned int section, u
 	io_loc.sector = target;
 	io_loc.count = n_sectors;
 
-	r = dm_io(&io_req, 1, &io_loc, NULL);
+	r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r)) {
 		WARN_ONCE(1, "asynchronous dm_io failed: %d", r);
 		fn(-1UL, data);
@@ -1519,7 +1519,7 @@ static void dm_integrity_flush_buffers(struct dm_integrity_c *ic, bool flush_dat
 		fr.io_reg.count = 0,
 		fr.ic = ic;
 		init_completion(&fr.comp);
-		r = dm_io(&fr.io_req, 1, &fr.io_reg, NULL);
+		r = dm_io(&fr.io_req, 1, &fr.io_reg, NULL, IOPRIO_DEFAULT);
 		BUG_ON(r);
 	}
 
@@ -1727,7 +1727,7 @@ static noinline void integrity_recheck(struct dm_integrity_io *dio, char *checks
 			io_loc.sector = sector;
 			io_loc.count = ic->sectors_per_block;
 
-			r = dm_io(&io_req, 1, &io_loc, NULL);
+			r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 			if (unlikely(r)) {
 				dio->bi_status = errno_to_blk_status(r);
 				goto free_ret;
@@ -2806,7 +2806,7 @@ static void integrity_recalc(struct work_struct *w)
 	io_loc.sector = get_data_sector(ic, area, offset);
 	io_loc.count = n_sectors;
 
-	r = dm_io(&io_req, 1, &io_loc, NULL);
+	r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r)) {
 		dm_integrity_io_error(ic, "reading data", r);
 		goto err;
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index f053ce2458147..7409490259d1d 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -305,7 +305,7 @@ static void km_dp_init(struct dpages *dp, void *data)
  */
 static void do_region(const blk_opf_t opf, unsigned int region,
 		      struct dm_io_region *where, struct dpages *dp,
-		      struct io *io)
+		      struct io *io, unsigned short ioprio)
 {
 	struct bio *bio;
 	struct page *page;
@@ -354,6 +354,7 @@ static void do_region(const blk_opf_t opf, unsigned int region,
 				       &io->client->bios);
 		bio->bi_iter.bi_sector = where->sector + (where->count - remaining);
 		bio->bi_end_io = endio;
+		bio->bi_ioprio = ioprio;
 		store_io_and_region_in_bio(bio, io, region);
 
 		if (op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES) {
@@ -383,7 +384,7 @@ static void do_region(const blk_opf_t opf, unsigned int region,
 
 static void dispatch_io(blk_opf_t opf, unsigned int num_regions,
 			struct dm_io_region *where, struct dpages *dp,
-			struct io *io, int sync)
+			struct io *io, int sync, unsigned short ioprio)
 {
 	int i;
 	struct dpages old_pages = *dp;
@@ -400,7 +401,7 @@ static void dispatch_io(blk_opf_t opf, unsigned int num_regions,
 	for (i = 0; i < num_regions; i++) {
 		*dp = old_pages;
 		if (where[i].count || (opf & REQ_PREFLUSH))
-			do_region(opf, i, where + i, dp, io);
+			do_region(opf, i, where + i, dp, io, ioprio);
 	}
 
 	/*
@@ -425,7 +426,7 @@ static void sync_io_complete(unsigned long error, void *context)
 
 static int sync_io(struct dm_io_client *client, unsigned int num_regions,
 		   struct dm_io_region *where, blk_opf_t opf, struct dpages *dp,
-		   unsigned long *error_bits)
+		   unsigned long *error_bits, unsigned short ioprio)
 {
 	struct io *io;
 	struct sync_io sio;
@@ -447,7 +448,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions,
 	io->vma_invalidate_address = dp->vma_invalidate_address;
 	io->vma_invalidate_size = dp->vma_invalidate_size;
 
-	dispatch_io(opf, num_regions, where, dp, io, 1);
+	dispatch_io(opf, num_regions, where, dp, io, 1, ioprio);
 
 	wait_for_completion_io(&sio.wait);
 
@@ -459,7 +460,8 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions,
 
 static int async_io(struct dm_io_client *client, unsigned int num_regions,
 		    struct dm_io_region *where, blk_opf_t opf,
-		    struct dpages *dp, io_notify_fn fn, void *context)
+		    struct dpages *dp, io_notify_fn fn, void *context,
+		    unsigned short ioprio)
 {
 	struct io *io;
 
@@ -479,7 +481,7 @@ static int async_io(struct dm_io_client *client, unsigned int num_regions,
 	io->vma_invalidate_address = dp->vma_invalidate_address;
 	io->vma_invalidate_size = dp->vma_invalidate_size;
 
-	dispatch_io(opf, num_regions, where, dp, io, 0);
+	dispatch_io(opf, num_regions, where, dp, io, 0, ioprio);
 	return 0;
 }
 
@@ -521,7 +523,8 @@ static int dp_init(struct dm_io_request *io_req, struct dpages *dp,
 }
 
 int dm_io(struct dm_io_request *io_req, unsigned int num_regions,
-	  struct dm_io_region *where, unsigned long *sync_error_bits)
+	  struct dm_io_region *where, unsigned long *sync_error_bits,
+	  unsigned short ioprio)
 {
 	int r;
 	struct dpages dp;
@@ -532,11 +535,11 @@ int dm_io(struct dm_io_request *io_req, unsigned int num_regions,
 
 	if (!io_req->notify.fn)
 		return sync_io(io_req->client, num_regions, where,
-			       io_req->bi_opf, &dp, sync_error_bits);
+			       io_req->bi_opf, &dp, sync_error_bits, ioprio);
 
 	return async_io(io_req->client, num_regions, where,
 			io_req->bi_opf, &dp, io_req->notify.fn,
-			io_req->notify.context);
+			io_req->notify.context, ioprio);
 }
 EXPORT_SYMBOL(dm_io);
 
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index d01807c50f20b..79c65c9ad5fa8 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -578,9 +578,9 @@ static int run_io_job(struct kcopyd_job *job)
 	io_job_start(job->kc->throttle);
 
 	if (job->op == REQ_OP_READ)
-		r = dm_io(&io_req, 1, &job->source, NULL);
+		r = dm_io(&io_req, 1, &job->source, NULL, IOPRIO_DEFAULT);
 	else
-		r = dm_io(&io_req, job->num_dests, job->dests, NULL);
+		r = dm_io(&io_req, job->num_dests, job->dests, NULL, IOPRIO_DEFAULT);
 
 	return r;
 }
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index f9f84236dfcd7..f7f9c2100937b 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -300,7 +300,7 @@ static int rw_header(struct log_c *lc, enum req_op op)
 {
 	lc->io_req.bi_opf = op;
 
-	return dm_io(&lc->io_req, 1, &lc->header_location, NULL);
+	return dm_io(&lc->io_req, 1, &lc->header_location, NULL, IOPRIO_DEFAULT);
 }
 
 static int flush_header(struct log_c *lc)
@@ -313,7 +313,7 @@ static int flush_header(struct log_c *lc)
 
 	lc->io_req.bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
 
-	return dm_io(&lc->io_req, 1, &null_location, NULL);
+	return dm_io(&lc->io_req, 1, &null_location, NULL, IOPRIO_DEFAULT);
 }
 
 static int read_header(struct log_c *log)
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ddcb2bc4a6179..9511dae5b556a 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -278,7 +278,7 @@ static int mirror_flush(struct dm_target *ti)
 	}
 
 	error_bits = -1;
-	dm_io(&io_req, ms->nr_mirrors, io, &error_bits);
+	dm_io(&io_req, ms->nr_mirrors, io, &error_bits, IOPRIO_DEFAULT);
 	if (unlikely(error_bits != 0)) {
 		for (i = 0; i < ms->nr_mirrors; i++)
 			if (test_bit(i, &error_bits))
@@ -554,7 +554,7 @@ static void read_async_bio(struct mirror *m, struct bio *bio)
 
 	map_region(&io, m, bio);
 	bio_set_m(bio, m);
-	BUG_ON(dm_io(&io_req, 1, &io, NULL));
+	BUG_ON(dm_io(&io_req, 1, &io, NULL, IOPRIO_DEFAULT));
 }
 
 static inline int region_in_sync(struct mirror_set *ms, region_t region,
@@ -681,7 +681,7 @@ static void do_write(struct mirror_set *ms, struct bio *bio)
 	 */
 	bio_set_m(bio, get_default_mirror(ms));
 
-	BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL));
+	BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL, IOPRIO_DEFAULT));
 }
 
 static void do_writes(struct mirror_set *ms, struct bio_list *writes)
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 15649921f2a9b..568d10842b1f4 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -223,7 +223,7 @@ static void do_metadata(struct work_struct *work)
 {
 	struct mdata_req *req = container_of(work, struct mdata_req, work);
 
-	req->result = dm_io(req->io_req, 1, req->where, NULL);
+	req->result = dm_io(req->io_req, 1, req->where, NULL, IOPRIO_DEFAULT);
 }
 
 /*
@@ -247,7 +247,7 @@ static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, blk_opf_t opf,
 	struct mdata_req req;
 
 	if (!metadata)
-		return dm_io(&io_req, 1, &where, NULL);
+		return dm_io(&io_req, 1, &where, NULL, IOPRIO_DEFAULT);
 
 	req.where = &where;
 	req.io_req = &io_req;
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index 7b620b187da90..49e4a35d70196 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -511,7 +511,7 @@ static noinline int verity_recheck(struct dm_verity *v, struct dm_verity_io *io,
 	io_loc.bdev = v->data_dev->bdev;
 	io_loc.sector = cur_block << (v->data_dev_block_bits - SECTOR_SHIFT);
 	io_loc.count = 1 << (v->data_dev_block_bits - SECTOR_SHIFT);
-	r = dm_io(&io_req, 1, &io_loc, NULL);
+	r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r))
 		goto free_ret;
 
diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c
index 074cb785eafc1..6a4279bfb1e77 100644
--- a/drivers/md/dm-writecache.c
+++ b/drivers/md/dm-writecache.c
@@ -531,7 +531,7 @@ static void ssd_commit_flushed(struct dm_writecache *wc, bool wait_for_ios)
 		req.notify.context = &endio;
 
 		/* writing via async dm-io (implied by notify.fn above) won't return an error */
-		(void) dm_io(&req, 1, &region, NULL);
+		(void) dm_io(&req, 1, &region, NULL, IOPRIO_DEFAULT);
 		i = j;
 	}
 
@@ -568,7 +568,7 @@ static void ssd_commit_superblock(struct dm_writecache *wc)
 	req.notify.fn = NULL;
 	req.notify.context = NULL;
 
-	r = dm_io(&req, 1, &region, NULL);
+	r = dm_io(&req, 1, &region, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r))
 		writecache_error(wc, r, "error writing superblock");
 }
@@ -596,7 +596,7 @@ static void writecache_disk_flush(struct dm_writecache *wc, struct dm_dev *dev)
 	req.client = wc->dm_io;
 	req.notify.fn = NULL;
 
-	r = dm_io(&req, 1, &region, NULL);
+	r = dm_io(&req, 1, &region, NULL, IOPRIO_DEFAULT);
 	if (unlikely(r))
 		writecache_error(wc, r, "error flushing metadata: %d", r);
 }
@@ -990,7 +990,7 @@ static int writecache_read_metadata(struct dm_writecache *wc, sector_t n_sectors
 	req.client = wc->dm_io;
 	req.notify.fn = NULL;
 
-	return dm_io(&req, 1, &region, NULL);
+	return dm_io(&req, 1, &region, NULL, IOPRIO_DEFAULT);
 }
 
 static void writecache_resume(struct dm_target *ti)
diff --git a/include/linux/dm-io.h b/include/linux/dm-io.h
index 7595142f3fc57..7b2968612b7e6 100644
--- a/include/linux/dm-io.h
+++ b/include/linux/dm-io.h
@@ -80,7 +80,8 @@ void dm_io_client_destroy(struct dm_io_client *client);
  * error occurred doing io to the corresponding region.
  */
 int dm_io(struct dm_io_request *io_req, unsigned int num_regions,
-	  struct dm_io_region *region, unsigned int long *sync_error_bits);
+	  struct dm_io_region *region, unsigned int long *sync_error_bits,
+	  unsigned short ioprio);
 
 #endif	/* __KERNEL__ */
 #endif	/* _LINUX_DM_IO_H */
-- 
2.43.0

[PATCH 6.7 710/713] dm-integrity: align the outgoing bio in integrity_recheck

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit b4d78cfeb30476239cf08f4f40afc095c173d6e3 ]

It is possible to set up dm-integrity with smaller sector size than
the logical sector size of the underlying device. In this situation,
dm-integrity guarantees that the outgoing bios have the same alignment as
incoming bios (so, if you create a filesystem with 4k block size,
dm-integrity would send 4k-aligned bios to the underlying device).

This guarantee was broken when integrity_recheck was implemented.
integrity_recheck sends bio that is aligned to ic->sectors_per_block. So
if we set up integrity with 512-byte sector size on a device with logical
block size 4k, we would be sending unaligned bio. This triggered a bug in
one of our internal tests.

This commit fixes it by determining the actual alignment of the
incoming bio and then makes sure that the outgoing bio in
integrity_recheck has the same alignment.

Fixes: c88f5e553fe3 ("dm-integrity: recheck the integrity tag after a failure")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-integrity.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index ec8df735077fe..2cc30b9ab232a 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1699,7 +1699,6 @@ static noinline void integrity_recheck(struct dm_integrity_io *dio, char *checks
 	struct bio_vec bv;
 	sector_t sector, logical_sector, area, offset;
 	struct page *page;
-	void *buffer;
 
 	get_area_and_offset(ic, dio->range.logical_sector, &area, &offset);
 	dio->metadata_block = get_metadata_sector_and_offset(ic, area, offset,
@@ -1708,13 +1707,14 @@ static noinline void integrity_recheck(struct dm_integrity_io *dio, char *checks
 	logical_sector = dio->range.logical_sector;
 
 	page = mempool_alloc(&ic->recheck_pool, GFP_NOIO);
-	buffer = page_to_virt(page);
 
 	__bio_for_each_segment(bv, bio, iter, dio->bio_details.bi_iter) {
 		unsigned pos = 0;
 
 		do {
+			sector_t alignment;
 			char *mem;
+			char *buffer = page_to_virt(page);
 			int r;
 			struct dm_io_request io_req;
 			struct dm_io_region io_loc;
@@ -1727,6 +1727,14 @@ static noinline void integrity_recheck(struct dm_integrity_io *dio, char *checks
 			io_loc.sector = sector;
 			io_loc.count = ic->sectors_per_block;
 
+			/* Align the bio to logical block size */
+			alignment = dio->range.logical_sector | bio_sectors(bio) | (PAGE_SIZE >> SECTOR_SHIFT);
+			alignment &= -alignment;
+			io_loc.sector = round_down(io_loc.sector, alignment);
+			io_loc.count += sector - io_loc.sector;
+			buffer += (sector - io_loc.sector) << SECTOR_SHIFT;
+			io_loc.count = round_up(io_loc.count, alignment);
+
 			r = dm_io(&io_req, 1, &io_loc, NULL, IOPRIO_DEFAULT);
 			if (unlikely(r)) {
 				dio->bi_status = errno_to_blk_status(r);
-- 
2.43.0

[PATCH 6.7 711/713] x86/efistub: Clear decompressor BSS in native EFI entrypoint

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit b3810c5a2cc4a6665f7a65bed5393c75ce3f3aa2 ]

The EFI stub on x86 no longer invokes the decompressor as a subsequent
boot stage, but calls into the decompression code directly while running
in the context of the EFI boot services.

This means that when using the native EFI entrypoint (as opposed to the
EFI handover protocol, which clears BSS explicitly), the firmware PE
image loader is being relied upon to ensure that BSS is zeroed before
the EFI stub is entered from the firmware.

As Radek's report proves, this is a bad idea. Not all loaders do this
correctly, which means some global variables that should be statically
initialized to 0x0 may have junk in them.

So clear BSS explicitly when entering via efi_pe_entry(). Note that
zeroing BSS from C code is not generally safe, but in this case, the
following assignment and dereference of a global pointer variable
ensures that the memset() cannot be deferred or reordered.

Cc: <stable@kernel.org> # v6.1+
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/x86-stub.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 99429bc4b0c7e..681f576ec02a0 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -21,6 +21,8 @@
 #include "efistub.h"
 #include "x86-stub.h"
 
+extern char _bss[], _ebss[];
+
 const efi_system_table_t *efi_system_table;
 const efi_dxe_services_table_t *efi_dxe_table;
 static efi_loaded_image_t *image = NULL;
@@ -465,6 +467,8 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	efi_status_t status;
 	char *cmdline_ptr;
 
+	memset(_bss, 0, _ebss - _bss);
+
 	efi_system_table = sys_table_arg;
 
 	/* Check if we were booted by the EFI firmware */
@@ -958,8 +962,6 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
 void efi_handover_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg,
 			struct boot_params *boot_params)
 {
-	extern char _bss[], _ebss[];
-
 	memset(_bss, 0, _ebss - _bss);
 	efi_stub_entry(handle, sys_table_arg, boot_params);
 }
-- 
2.43.0

[PATCH 6.7 712/713] x86/efistub: Don't clear BSS twice in mixed mode

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit df7ecce842b846a04d087ba85fdb79a90e26a1b0 ]

Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.

So make the memset() conditional on whether the EFI stub is running in
native mode.

Fixes: b3810c5a2cc4a666 ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/x86-stub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 681f576ec02a0..c9857ee3880c2 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -467,7 +467,8 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	efi_status_t status;
 	char *cmdline_ptr;
 
-	memset(_bss, 0, _ebss - _bss);
+	if (efi_is_native())
+		memset(_bss, 0, _ebss - _bss);
 
 	efi_system_table = sys_table_arg;
 
-- 
2.43.0

[PATCH 6.7 713/713] Linux 6.7.11-rc1

[Sasha Levin]

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 00c159535dabe..c5b534f459dac 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 7
-SUBLEVEL = 10
-EXTRAVERSION =
+SUBLEVEL = 11
+EXTRAVERSION = -rc1
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
-- 
2.43.0

Re: [PATCH 6.7 000/713] 6.7.11-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 555 bytes --]

On Sun, Mar 24, 2024 at 06:35:26PM -0400, Sasha Levin wrote:
> 
> This is the start of the stable review cycle for the 6.7.11 release.
> There are 713 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully compiled and installed the kernel on my computer (Acer
Aspire E15, Intel Core i3 Haswell). No noticeable regressions.

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 6.7 000/713] 6.7.11-rc1 review

[Naresh Kamboju]

On Mon, 25 Mar 2024 at 04:17, Sasha Levin <sashal@kernel.org> wrote:
>
>
> This is the start of the stable review cycle for the 6.7.11 release.
> There are 713 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue Mar 26 10:47:13 PM UTC 2024.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-6.7.y&id2=v6.7.10
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha

The 32-bit architecture boot failed on stable rc 6.8 and 6.7 branches.

Boot details,
 - linux-stable-rc-linux-6.8.y - arm X15, qemu-arm and qemu-i386 - Boot failed
 - linux-stable-rc-linux-6.7.y - arm X15, qemu-arm and qemu-i386 - Boot failed

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

The bisection is in progress to investigate this problem.
Serial console logs printing as "Starting kernel ..."  that's all.


Steps to reproduce:
-------
tuxrun --runtime podman --device qemu-armv7 --boot-args rw --kernel
https://storage.tuxsuite.com/public/linaro/lkft/builds/2e9fapDKuhiDqLpezalPml1QIf3/zImage
--rootfs https://storage.tuxboot.com/debian/bookworm/armhf/rootfs.ext4.xz
--modules https://storage.tuxsuite.com/public/linaro/lkft/builds/2e9fapDKuhiDqLpezalPml1QIf3/modules.tar.xz
--parameters SKIPFILE=skipfile-lkft.yaml --image
docker.io/linaro/tuxrun-dispatcher:v0.66.0 --tests rcutorture
--timeouts boot=30


Links:
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.7.y/build/v6.7.10-713-g6f0681544906/testrun/23140347/suite/boot/test/gcc-13-lkftconfig-rcutorture/history/
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.7.y/build/v6.7.10-713-g6f0681544906/testrun/23141457/suite/boot/test/gcc-13-lkftconfig-rcutorture/details/
 - https://tuxapi.tuxsuite.com/v1/groups/linaro/projects/lkft/tests/2e9fc0JdR6N9yOjnYWnO9druaJK

 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.8.y/build/v6.8.1-715-gb0f6de60d946/testrun/23138873/suite/boot/test/gcc-13-lkftconfig-rcutorture/history/
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.8.y/build/v6.8.1-715-gb0f6de60d946/testrun/23138873/suite/boot/test/gcc-13-lkftconfig-rcutorture/details/
 - https://tuxapi.tuxsuite.com/v1/groups/linaro/projects/lkft/tests/2e9dH67vQBvX6giHu5ymUEpe2H4

--
Linaro LKFT
https://lkft.linaro.org