All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
@ 2016-12-13 17:48 ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

Hello,

This the forth version of the series adding support for the SDHCI
Xenon controller. It can be currently found on the Armada 37xx and the
Armada 7K/8K but will be also used in more Marvell SoC (and not only
the mvebu ones actually).

v3 -> v4:
For this version a few change have been done:
- fixes 2 bug  reported by kbuild-bot
  - remove extra of_node_put()
  - convert 0 in false for function returning boolean

- add a device tree node for the sdhci controller present on the CP
  master for A7K/A8K. It also led to rename the sdhci0 node on AP to
  ap_sdhci0 to make a distinction with the one present on CP master.

v2 -> v3
I think that now most (if not all) the remarks had been taking into
account since the second version. According to Ziji Hu, here are the
following changes:
" Changes in V3:
  Adjust and improve Xenon DT bindings. Move some caps setting from driver into
  DT. Use mmc-card sub-node to represent eMMC type.
  Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
  Improve Xenon probe and ->init_card() functions.
  Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
  Split PHY patch into two smaller patches.
  Temporarily remove AXI clock before its implementation is improved."

Besides this changes I also
- Removed the sdhci-xenon-phy.h and moved its content in the
shc-xenon-phy.c file.
- Fixed the tuning-count usage
- Managed the error case for clk_prepare_enable

For the record the change from v1 was:
" Changes in V2:
  rebase on v4.9-rc2.
  Re-write Xenon bindings. Ajust Xenon DT property naming.
  Add a new DT property to indicate eMMC card type, instead of using
  variable card_candidate.
  Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
  Add support to HS400 retuning."

Thanks,

Gregory

Gregory CLEMENT (3):
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: configs: enable SDHCI driver for Xenon

Hu Ziji (9):
  mmc: sdhci: Export sdhci_set_ios() from sdhci.c
  mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
  mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
  mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
  MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
  dt: bindings: Add bindings for Marvell Xenon SD Host Controller
  mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
  mmc: sdhci-xenon: Add SOC PHY PAD voltage control

 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++-
 MAINTAINERS                                                   |   7 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts                |  17 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi                  |  11 +-
 arch/arm64/boot/dts/marvell/armada-7040-db.dts                |  14 +-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi                 |   9 +-
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi          |  10 +-
 arch/arm64/configs/defconfig                                  |   1 +-
 drivers/mmc/host/Kconfig                                      |   9 +-
 drivers/mmc/host/Makefile                                     |   3 +-
 drivers/mmc/host/sdhci-xenon-phy.c                            | 908 +++++++-
 drivers/mmc/host/sdhci-xenon.c                                | 615 +++++-
 drivers/mmc/host/sdhci-xenon.h                                | 111 +-
 drivers/mmc/host/sdhci.c                                      |  14 +-
 drivers/mmc/host/sdhci.h                                      |   5 +-
 15 files changed, 1926 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.h

base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942
-- 
git-series 0.9.1

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
@ 2016-12-13 17:48 ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

Hello,

This the forth version of the series adding support for the SDHCI
Xenon controller. It can be currently found on the Armada 37xx and the
Armada 7K/8K but will be also used in more Marvell SoC (and not only
the mvebu ones actually).

v3 -> v4:
For this version a few change have been done:
- fixes 2 bug  reported by kbuild-bot
  - remove extra of_node_put()
  - convert 0 in false for function returning boolean

- add a device tree node for the sdhci controller present on the CP
  master for A7K/A8K. It also led to rename the sdhci0 node on AP to
  ap_sdhci0 to make a distinction with the one present on CP master.

v2 -> v3
I think that now most (if not all) the remarks had been taking into
account since the second version. According to Ziji Hu, here are the
following changes:
" Changes in V3:
  Adjust and improve Xenon DT bindings. Move some caps setting from driver into
  DT. Use mmc-card sub-node to represent eMMC type.
  Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
  Improve Xenon probe and ->init_card() functions.
  Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
  Split PHY patch into two smaller patches.
  Temporarily remove AXI clock before its implementation is improved."

Besides this changes I also
- Removed the sdhci-xenon-phy.h and moved its content in the
shc-xenon-phy.c file.
- Fixed the tuning-count usage
- Managed the error case for clk_prepare_enable

For the record the change from v1 was:
" Changes in V2:
  rebase on v4.9-rc2.
  Re-write Xenon bindings. Ajust Xenon DT property naming.
  Add a new DT property to indicate eMMC card type, instead of using
  variable card_candidate.
  Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
  Add support to HS400 retuning."

Thanks,

Gregory

Gregory CLEMENT (3):
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: configs: enable SDHCI driver for Xenon

Hu Ziji (9):
  mmc: sdhci: Export sdhci_set_ios() from sdhci.c
  mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
  mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
  mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
  MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
  dt: bindings: Add bindings for Marvell Xenon SD Host Controller
  mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
  mmc: sdhci-xenon: Add SOC PHY PAD voltage control

 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++-
 MAINTAINERS                                                   |   7 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts                |  17 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi                  |  11 +-
 arch/arm64/boot/dts/marvell/armada-7040-db.dts                |  14 +-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi                 |   9 +-
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi          |  10 +-
 arch/arm64/configs/defconfig                                  |   1 +-
 drivers/mmc/host/Kconfig                                      |   9 +-
 drivers/mmc/host/Makefile                                     |   3 +-
 drivers/mmc/host/sdhci-xenon-phy.c                            | 908 +++++++-
 drivers/mmc/host/sdhci-xenon.c                                | 615 +++++-
 drivers/mmc/host/sdhci-xenon.h                                | 111 +-
 drivers/mmc/host/sdhci.c                                      |  14 +-
 drivers/mmc/host/sdhci.h                                      |   5 +-
 15 files changed, 1926 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.h

base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942
-- 
git-series 0.9.1

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 01/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Export sdhci_set_ios() in sdhci.c.
Thus vendor sdhci driver can implement its own set_ios() routine.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 71654b90227f..ea06faf8a437 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1563,7 +1563,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 }
 EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
 
-static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
@@ -1723,6 +1723,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
 }
+EXPORT_SYMBOL_GPL(sdhci_set_ios);
 
 static int sdhci_get_cd(struct mmc_host *mmc)
 {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 766df17fb7eb..37771de4cafa 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -688,6 +688,7 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
+void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 01/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Export sdhci_set_ios() in sdhci.c.
Thus vendor sdhci driver can implement its own set_ios() routine.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 71654b90227f..ea06faf8a437 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1563,7 +1563,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 }
 EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
 
-static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
@@ -1723,6 +1723,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
 }
+EXPORT_SYMBOL_GPL(sdhci_set_ios);
 
 static int sdhci_get_cd(struct mmc_host *mmc)
 {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 766df17fb7eb..37771de4cafa 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -688,6 +688,7 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
+void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Thomas Petazzoni, Andrew Lunn, Yehuda Yitschak, Marcin Wojtas,
	Jason Cooper, Hanna Hawa, Kostya Porotchkin, Nadav Haklai,
	Ziji Hu, Jimmy Xu, Doug Jones, Ryan Gao, Jisheng Zhang,
	Gregory CLEMENT, Victor Gu, Wei(SOCP) Liu, Wilson Ding,
	linux-arm-kernel, Sebastian Hesselbarth

From: Hu Ziji <huziji@marvell.com>

Export sdhci_start_signal_voltage_switch() from sdhci.c.
Thus vendor sdhci driver can implement its own signal voltage
switch routine.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 5 +++--
 drivers/mmc/host/sdhci.h | 2 ++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ea06faf8a437..8e6e4e37e3b4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1832,8 +1832,8 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
-					     struct mmc_ios *ios)
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+				      struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
@@ -1925,6 +1925,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 		return 0;
 	}
 }
+EXPORT_SYMBOL_GPL(sdhci_start_signal_voltage_switch);
 
 static int sdhci_card_busy(struct mmc_host *mmc)
 {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 37771de4cafa..cd18b6f19c3b 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -689,6 +689,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+				      struct mmc_ios *ios);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Export sdhci_start_signal_voltage_switch() from sdhci.c.
Thus vendor sdhci driver can implement its own signal voltage
switch routine.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 5 +++--
 drivers/mmc/host/sdhci.h | 2 ++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ea06faf8a437..8e6e4e37e3b4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1832,8 +1832,8 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
-					     struct mmc_ios *ios)
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+				      struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
@@ -1925,6 +1925,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 		return 0;
 	}
 }
+EXPORT_SYMBOL_GPL(sdhci_start_signal_voltage_switch);
 
 static int sdhci_card_busy(struct mmc_host *mmc)
 {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 37771de4cafa..cd18b6f19c3b 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -689,6 +689,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+				      struct mmc_ios *ios);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 03/12] mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Export sdhci_execute_tuning() from sdhci.c.
Thus vendor sdhci driver can execute its own tuning process.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8e6e4e37e3b4..e971abb1368f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1950,7 +1950,7 @@ static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
 	return 0;
 }
 
-static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
+int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
@@ -2139,6 +2139,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	spin_unlock_irqrestore(&host->lock, flags);
 	return err;
 }
+EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
 
 static int sdhci_select_drive_strength(struct mmc_card *card,
 				       unsigned int max_dtr, int host_drv,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index cd18b6f19c3b..95beadc66849 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -691,6 +691,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
+int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 03/12] mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Export sdhci_execute_tuning() from sdhci.c.
Thus vendor sdhci driver can execute its own tuning process.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8e6e4e37e3b4..e971abb1368f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1950,7 +1950,7 @@ static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
 	return 0;
 }
 
-static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
+int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
@@ -2139,6 +2139,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	spin_unlock_irqrestore(&host->lock, flags);
 	return err;
 }
+EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
 
 static int sdhci_select_drive_strength(struct mmc_card *card,
 				       unsigned int max_dtr, int host_drv,
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index cd18b6f19c3b..95beadc66849 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -691,6 +691,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
+int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Thomas Petazzoni, Andrew Lunn, Yehuda Yitschak, Marcin Wojtas,
	Jason Cooper, Hanna Hawa, Kostya Porotchkin, Nadav Haklai,
	Ziji Hu, Jimmy Xu, Doug Jones, Ryan Gao, Jisheng Zhang,
	Gregory CLEMENT, Victor Gu, Wei(SOCP) Liu, Wilson Ding,
	linux-arm-kernel, Sebastian Hesselbarth

From: Hu Ziji <huziji@marvell.com>

Export sdhci_enable_sdio_irq() from sdhci.c. Thus vendor SDHC
driver can implement its specific SDIO irq contorl.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e971abb1368f..e174379ee019 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1817,7 +1817,7 @@ static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
 	}
 }
 
-static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
@@ -1831,6 +1831,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
+EXPORT_SYMBOL_GPL(sdhci_enable_sdio_irq);
 
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 95beadc66849..a3e8913452fc 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -692,6 +692,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Export sdhci_enable_sdio_irq() from sdhci.c. Thus vendor SDHC
driver can implement its specific SDIO irq contorl.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci.c | 3 ++-
 drivers/mmc/host/sdhci.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e971abb1368f..e174379ee019 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1817,7 +1817,7 @@ static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
 	}
 }
 
-static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
@@ -1831,6 +1831,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
+EXPORT_SYMBOL_GPL(sdhci_enable_sdio_irq);
 
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 95beadc66849..a3e8913452fc 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -692,6 +692,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
+void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
 
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 05/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Add maintainer entry for Marvell Xenon eMMC/SD/SDIO Host
Controller drivers.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c44795306342..1a5c4c30ea24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7604,6 +7604,11 @@ M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mvsdio.*
 
+MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
+M:	Ziji Hu <huziji@marvell.com>
+L:	linux-mmc@vger.kernel.org
+S:	Supported
+
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
 S:	Orphan
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 05/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Add maintainer entry for Marvell Xenon eMMC/SD/SDIO Host
Controller drivers.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c44795306342..1a5c4c30ea24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7604,6 +7604,11 @@ M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mvsdio.*
 
+MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
+M:	Ziji Hu <huziji@marvell.com>
+L:	linux-mmc at vger.kernel.org
+S:	Supported
+
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev at vger.kernel.org
 S:	Orphan
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Marvell Xenon SDHC can support eMMC/SD/SDIO.
Add Xenon-specific properties.
Also add properties for Xenon PHY setting.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 +++++++-
 MAINTAINERS                                                   |   1 +-
 2 files changed, 198 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt

diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
new file mode 100644
index 000000000000..c7589f8d4e3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -0,0 +1,197 @@
+Marvell Xenon SDHCI Controller device tree bindings
+This file documents differences between the core mmc properties
+described by mmc.txt and the properties used by the Xenon implementation.
+
+Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+Each SDHC is independent and owns independent resources, such as register sets,
+clock and PHY.
+Each SDHC should have an independent device tree node.
+
+Required Properties:
+- compatible: should be one of the following
+  - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SOC.
+  Must provide a second register area and marvell,pad-type.
+  - "marvell,armada-7000-sdhci": For controllers on Armada 7K/8K SOC.
+
+- clocks:
+  Array of clocks required for SDHC.
+  Require at least input clock for Xenon IP core.
+
+- clock-names:
+  Array of names corresponding to clocks property.
+  The input clock for Xenon IP core should be named as "core".
+
+- reg:
+  * For "marvell,armada-3700-sdhci", two register areas.
+    The first one for Xenon IP register. The second one for the Armada 3700 SOC
+    PHY PAD Voltage Control register.
+    Please follow the examples with compatible "marvell,armada-3700-sdhci"
+    in below.
+    Please also check property marvell,pad-type in below.
+
+  * For other compatible strings, one register area for Xenon IP.
+
+Optional Properties:
+- mmc-card:
+  mmc-card child node must be provided when current SDHC is for eMMC.
+  Xenon SDHC often can support both SD and eMMC. This child node indicates that
+  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
+  operations can be enabled prior to eMMC init sequence.
+  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
+  This child node should not be set if current Xenon SDHC is for SD/SDIO.
+
+- bus-width:
+  When 8-bit data bus width is in use for eMMC, this property should be
+  explicitly provided and set as 8.
+  It is optional when data bus width is 4-bit or 1-bit.
+
+- mmc-ddr-1_8v:
+  Select this property when eMMC HS DDR is supported on SDHC side.
+
+- mmc-hs400-1_8v:
+  Select this property when eMMC HS400 is supported on SDHC side.
+
+- no-1-8-v:
+  Select this property when 1.8V signaling voltage supply is unavailable.
+  When this property is enabled, both mmc-ddr-1_8v and mmc-hs400-1_8v should be
+  cleared.
+
+- marvell,xenon-sdhc-id:
+  Indicate the corresponding bit index of current SDHC in
+  SDHC System Operation Control Register Bit[7:0].
+  Set/clear the corresponding bit to enable/disable current SDHC.
+  If Xenon IP contains only one SDHC, this property is optional.
+
+- marvell,xenon-phy-type:
+  Xenon support mutilple types of PHYs.
+  To select eMMC 5.1 PHY, set:
+  marvell,xenon-phy-type = "emmc 5.1 phy"
+  eMMC 5.1 PHY is the default choice if this property is not provided.
+  To select eMMC 5.0 PHY, set:
+  marvell,xenon-phy-type = "emmc 5.0 phy"
+
+  All those types of PHYs can support eMMC, SD and SDIO.
+  Please note that this property only presents the type of PHY.
+  It doesn't stand for the entire SDHC type or property.
+  For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only supports
+  eMMC 5.1.
+
+- marvell,xenon-phy-znr:
+  Set PHY ZNR value.
+  Only available for eMMC PHY 5.1 and eMMC PHY 5.0.
+  Valid range = [0:0x1F].
+  ZNR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-zpr:
+  Set PHY ZPR value.
+  Only available for eMMC PHY 5.1 and eMMC PHY 5.0.
+  Valid range = [0:0x1F].
+  ZPR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-nr-success-tun:
+  Set the number of required consecutive successful sampling points used to
+  identify a valid sampling window, in tuning process.
+  Valid range = [1:7].
+  Set as 0x4 by default if this property is not provided.
+
+- marvell,xenon-phy-tun-step-divider:
+  Set the divider for calculating TUN_STEP.
+  Set as 64 by default if this property is not provided.
+
+- marvell,xenon-phy-slow-mode:
+  If this property is selected, transfers will bypass PHY.
+  Only available when bus frequency lower than 55MHz in SDR mde.
+  Disabled by default. Please only try this property if timing issues always
+  occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, SD SDR50 mode.
+
+- marvell,xenon-tun-count:
+  Xenon SDHC SOC usually doesn't provide re-tuning counter in
+  Capabilities Register 3 Bit[11:8].
+  This property provides the re-tuning counter.
+  If this property is not set, default re-tuning counter will
+  be set as 0x9 in driver.
+
+- marvell,pad-type:
+  Type of Armada 3700 SOC PHY PAD Voltage Controller register.
+  Only valid when "marvell,armada-3700-sdhci" is selected.
+  Two types: "sd" and "fixed-1-8v".
+  If "sd" is slected, SOC PHY PAD is set as 3.3V at the beginning and is
+  switched to 1.8V when SD in UHS-I.
+  If "fixed-1-8v" is slected, SOC PHY PAD is fixed 1.8V, such as for eMMC.
+  Please follow the examples with compatible "marvell,armada-3700-sdhci"
+  in below.
+
+Example:
+- For eMMC:
+
+	sdhci@aa0000 {
+		compatible = "marvell,armada-7000-sdhci";
+		reg = <0xaa0000 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+		clocks = <&emmc_clk>;
+		clock-names = "core";
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs400-1_8v;
+		marvell,xenon-sdhc-id = <0>;
+		marvell,xenon-phy-type = "emmc 5.1 phy";
+		marvell,xenon-tun-count = <11>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mmccard: mmccard@0 {
+			compatible = "mmc-card";
+			reg = <0>;
+		};
+	};
+
+- For SD/SDIO:
+
+	sdhci@ab0000 {
+		compatible = "marvell,armada-7000-sdhci";
+		reg = <0xab0000 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+		vqmmc-supply = <&sd_regulator>;
+		clocks = <&sdclk>;
+		clock-names = "core";
+		bus-width = <4>;
+		marvell,xenon-tun-count = <9>;
+	};
+
+- For eMMC with compatible "marvell,armada-3700-sdhci":
+
+	sdhci@aa0000 {
+		compatible = "marvell,armada-3700-sdhci";
+		reg = <0xaa0000 0x1000>,
+		      <phy_addr 0x4>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+		clocks = <&emmcclk>;
+		clock-names = "core";
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs400-1_8v;
+
+		marvell,pad-type = "fixed-1-8v";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mmccard: mmccard@0 {
+			compatible = "mmc-card";
+			reg = <0>;
+		};
+	};
+
+- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+
+	sdhci@ab0000 {
+		compatible = "marvell,armada-3700-sdhci";
+		reg = <0xab0000 0x1000>,
+		      <phy_addr 0x4>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+		vqmmc-supply = <&sd_regulator>;
+		clocks = <&sdclk>;
+		clock-names = "core";
+		bus-width = <4>;
+
+		marvell,pad-type = "sd";
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a5c4c30ea24..850a0afb0c8d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Ziji Hu <huziji@marvell.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev@vger.kernel.org
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Marvell Xenon SDHC can support eMMC/SD/SDIO.
Add Xenon-specific properties.
Also add properties for Xenon PHY setting.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 +++++++-
 MAINTAINERS                                                   |   1 +-
 2 files changed, 198 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt

diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
new file mode 100644
index 000000000000..c7589f8d4e3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -0,0 +1,197 @@
+Marvell Xenon SDHCI Controller device tree bindings
+This file documents differences between the core mmc properties
+described by mmc.txt and the properties used by the Xenon implementation.
+
+Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+Each SDHC is independent and owns independent resources, such as register sets,
+clock and PHY.
+Each SDHC should have an independent device tree node.
+
+Required Properties:
+- compatible: should be one of the following
+  - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SOC.
+  Must provide a second register area and marvell,pad-type.
+  - "marvell,armada-7000-sdhci": For controllers on Armada 7K/8K SOC.
+
+- clocks:
+  Array of clocks required for SDHC.
+  Require at least input clock for Xenon IP core.
+
+- clock-names:
+  Array of names corresponding to clocks property.
+  The input clock for Xenon IP core should be named as "core".
+
+- reg:
+  * For "marvell,armada-3700-sdhci", two register areas.
+    The first one for Xenon IP register. The second one for the Armada 3700 SOC
+    PHY PAD Voltage Control register.
+    Please follow the examples with compatible "marvell,armada-3700-sdhci"
+    in below.
+    Please also check property marvell,pad-type in below.
+
+  * For other compatible strings, one register area for Xenon IP.
+
+Optional Properties:
+- mmc-card:
+  mmc-card child node must be provided when current SDHC is for eMMC.
+  Xenon SDHC often can support both SD and eMMC. This child node indicates that
+  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
+  operations can be enabled prior to eMMC init sequence.
+  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
+  This child node should not be set if current Xenon SDHC is for SD/SDIO.
+
+- bus-width:
+  When 8-bit data bus width is in use for eMMC, this property should be
+  explicitly provided and set as 8.
+  It is optional when data bus width is 4-bit or 1-bit.
+
+- mmc-ddr-1_8v:
+  Select this property when eMMC HS DDR is supported on SDHC side.
+
+- mmc-hs400-1_8v:
+  Select this property when eMMC HS400 is supported on SDHC side.
+
+- no-1-8-v:
+  Select this property when 1.8V signaling voltage supply is unavailable.
+  When this property is enabled, both mmc-ddr-1_8v and mmc-hs400-1_8v should be
+  cleared.
+
+- marvell,xenon-sdhc-id:
+  Indicate the corresponding bit index of current SDHC in
+  SDHC System Operation Control Register Bit[7:0].
+  Set/clear the corresponding bit to enable/disable current SDHC.
+  If Xenon IP contains only one SDHC, this property is optional.
+
+- marvell,xenon-phy-type:
+  Xenon support mutilple types of PHYs.
+  To select eMMC 5.1 PHY, set:
+  marvell,xenon-phy-type = "emmc 5.1 phy"
+  eMMC 5.1 PHY is the default choice if this property is not provided.
+  To select eMMC 5.0 PHY, set:
+  marvell,xenon-phy-type = "emmc 5.0 phy"
+
+  All those types of PHYs can support eMMC, SD and SDIO.
+  Please note that this property only presents the type of PHY.
+  It doesn't stand for the entire SDHC type or property.
+  For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only supports
+  eMMC 5.1.
+
+- marvell,xenon-phy-znr:
+  Set PHY ZNR value.
+  Only available for eMMC PHY 5.1 and eMMC PHY 5.0.
+  Valid range = [0:0x1F].
+  ZNR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-zpr:
+  Set PHY ZPR value.
+  Only available for eMMC PHY 5.1 and eMMC PHY 5.0.
+  Valid range = [0:0x1F].
+  ZPR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-nr-success-tun:
+  Set the number of required consecutive successful sampling points used to
+  identify a valid sampling window, in tuning process.
+  Valid range = [1:7].
+  Set as 0x4 by default if this property is not provided.
+
+- marvell,xenon-phy-tun-step-divider:
+  Set the divider for calculating TUN_STEP.
+  Set as 64 by default if this property is not provided.
+
+- marvell,xenon-phy-slow-mode:
+  If this property is selected, transfers will bypass PHY.
+  Only available when bus frequency lower than 55MHz in SDR mde.
+  Disabled by default. Please only try this property if timing issues always
+  occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, SD SDR50 mode.
+
+- marvell,xenon-tun-count:
+  Xenon SDHC SOC usually doesn't provide re-tuning counter in
+  Capabilities Register 3 Bit[11:8].
+  This property provides the re-tuning counter.
+  If this property is not set, default re-tuning counter will
+  be set as 0x9 in driver.
+
+- marvell,pad-type:
+  Type of Armada 3700 SOC PHY PAD Voltage Controller register.
+  Only valid when "marvell,armada-3700-sdhci" is selected.
+  Two types: "sd" and "fixed-1-8v".
+  If "sd" is slected, SOC PHY PAD is set as 3.3V at the beginning and is
+  switched to 1.8V when SD in UHS-I.
+  If "fixed-1-8v" is slected, SOC PHY PAD is fixed 1.8V, such as for eMMC.
+  Please follow the examples with compatible "marvell,armada-3700-sdhci"
+  in below.
+
+Example:
+- For eMMC:
+
+	sdhci at aa0000 {
+		compatible = "marvell,armada-7000-sdhci";
+		reg = <0xaa0000 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+		clocks = <&emmc_clk>;
+		clock-names = "core";
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs400-1_8v;
+		marvell,xenon-sdhc-id = <0>;
+		marvell,xenon-phy-type = "emmc 5.1 phy";
+		marvell,xenon-tun-count = <11>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mmccard: mmccard at 0 {
+			compatible = "mmc-card";
+			reg = <0>;
+		};
+	};
+
+- For SD/SDIO:
+
+	sdhci at ab0000 {
+		compatible = "marvell,armada-7000-sdhci";
+		reg = <0xab0000 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+		vqmmc-supply = <&sd_regulator>;
+		clocks = <&sdclk>;
+		clock-names = "core";
+		bus-width = <4>;
+		marvell,xenon-tun-count = <9>;
+	};
+
+- For eMMC with compatible "marvell,armada-3700-sdhci":
+
+	sdhci at aa0000 {
+		compatible = "marvell,armada-3700-sdhci";
+		reg = <0xaa0000 0x1000>,
+		      <phy_addr 0x4>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+		clocks = <&emmcclk>;
+		clock-names = "core";
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs400-1_8v;
+
+		marvell,pad-type = "fixed-1-8v";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mmccard: mmccard at 0 {
+			compatible = "mmc-card";
+			reg = <0>;
+		};
+	};
+
+- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+
+	sdhci at ab0000 {
+		compatible = "marvell,armada-3700-sdhci";
+		reg = <0xab0000 0x1000>,
+		      <phy_addr 0x4>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+		vqmmc-supply = <&sd_regulator>;
+		clocks = <&sdclk>;
+		clock-names = "core";
+		bus-width = <4>;
+
+		marvell,pad-type = "sd";
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a5c4c30ea24..850a0afb0c8d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Ziji Hu <huziji@marvell.com>
 L:	linux-mmc at vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 
 MATROX FRAMEBUFFER DRIVER
 L:	linux-fbdev at vger.kernel.org
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Add Xenon eMMC/SD/SDIO host controller core functionality.
Add Xenon specific intialization process.
Add Xenon specific mmc_host_ops APIs.
Add Xenon specific register definitions.

Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.

Marvell Xenon SDHC conforms to SD Physical Layer Specification
Version 3.01 and is designed according to the guidelines provided
in the SD Host Controller Standard Specification Version 3.00.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 MAINTAINERS                    |   1 +-
 drivers/mmc/host/Kconfig       |   9 +-
 drivers/mmc/host/Makefile      |   3 +-
 drivers/mmc/host/sdhci-xenon.c | 612 ++++++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.h |  70 ++++-
 5 files changed, 695 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-xenon.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 850a0afb0c8d..bb33286aeb48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Ziji Hu <huziji@marvell.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
+F:	drivers/mmc/host/sdhci-xenon*
 F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 
 MATROX FRAMEBUFFER DRIVER
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5274f503a39a..85a53623526a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -798,3 +798,12 @@ config MMC_SDHCI_BRCMSTB
 	  Broadcom STB SoCs.
 
 	  If unsure, say Y.
+
+config MMC_SDHCI_XENON
+	tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
+	depends on MMC_SDHCI && MMC_SDHCI_PLTFM
+	help
+	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
+	  If you have a machine with integrated Marvell Xenon SDHC IP,
+	  say Y or M here.
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index e2bdaaf43184..75eaf743486c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -80,3 +80,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB)		+= sdhci-brcmstb.o
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
 endif
+
+obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
+sdhci-xenon-driver-y		+= sdhci-xenon.o
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
new file mode 100644
index 000000000000..c71439fbc308
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -0,0 +1,612 @@
+/*
+ * Driver for Marvell Xenon SDHC as a platform device
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * Inspired by Jisheng Zhang <jszhang@marvell.com>
+ * Special thanks to Video BG4 project team.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+static int enable_xenon_internal_clk(struct sdhci_host *host)
+{
+	u32 reg;
+	u8 timeout;
+
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_INT_EN;
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+			& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			pr_err("%s: Internal clock never stabilised.\n",
+			       mmc_hostname(host->mmc));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+/* Set SDCLK-off-while-idle */
+static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
+				     unsigned char sdhc_id, bool enable)
+{
+	u32 reg;
+	u32 mask;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	/* Get the bit shift basing on the SDHC index */
+	mask = (0x1 << (SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable/Disable the Auto Clock Gating function */
+static void xenon_set_acg(struct sdhci_host *host, bool enable)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	if (enable)
+		reg &= ~SDHCI_AUTO_CLKGATE_DISABLE_MASK;
+	else
+		reg |= SDHCI_AUTO_CLKGATE_DISABLE_MASK;
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable this SDHC */
+static void xenon_enable_sdhc(struct sdhci_host *host,
+			      unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	reg |= (BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+
+	/*
+	 * Manually set the flag which all the card types require,
+	 * including SD, eMMC, SDIO
+	 */
+	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+}
+
+/* Disable this SDHC */
+static void xenon_disable_sdhc(struct sdhci_host *host,
+			       unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	reg &= ~(BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable Parallel Transfer Mode */
+static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
+					    unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
+	reg |= BIT(sdhc_id);
+	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
+}
+
+static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+
+	/* Disable the Re-Tuning Request functionality */
+	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
+	reg &= ~SDHCI_RETUNING_COMPATIBLE;
+	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
+
+	/* Disable the Re-tuning Event Signal Enable */
+	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
+	reg &= ~SDHCI_INT_RETUNE;
+	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
+
+	/* Force to use Tuning Mode 1 */
+	host->tuning_mode = SDHCI_TUNING_MODE_1;
+	/* Set re-tuning period */
+	host->tuning_count = 1 << (priv->tuning_count - 1);
+}
+
+/*
+ * Operations inside struct sdhci_ops
+ */
+/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
+static void sdhci_xenon_reset_exit(struct sdhci_host *host,
+				   unsigned char sdhc_id, u8 mask)
+{
+	/* Only SOFTWARE RESET ALL will clear the register setting */
+	if (!(mask & SDHCI_RESET_ALL))
+		return;
+
+	/* Disable tuning request and auto-retuning again */
+	xenon_sdhc_tuning_setup(host);
+
+	xenon_set_acg(host, true);
+
+	xenon_set_sdclk_off_idle(host, sdhc_id, false);
+}
+
+static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_reset(host, mask);
+	sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
+}
+
+/*
+ * Xenon defines different values for HS200 and HS400
+ * in Host_Control_2
+ */
+static void xenon_set_uhs_signaling(struct sdhci_host *host,
+				    unsigned int timing)
+{
+	u16 ctrl_2;
+
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	if (timing == MMC_TIMING_MMC_HS200)
+		ctrl_2 |= SDHCI_XENON_CTRL_HS200;
+	else if (timing == MMC_TIMING_UHS_SDR104)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+	else if (timing == MMC_TIMING_UHS_SDR12)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+	else if (timing == MMC_TIMING_UHS_SDR25)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+	else if (timing == MMC_TIMING_UHS_SDR50)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+	else if ((timing == MMC_TIMING_UHS_DDR50) ||
+		 (timing == MMC_TIMING_MMC_DDR52))
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+	else if (timing == MMC_TIMING_MMC_HS400)
+		ctrl_2 |= SDHCI_XENON_CTRL_HS400;
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static const struct sdhci_ops sdhci_xenon_ops = {
+	.set_clock		= sdhci_set_clock,
+	.set_bus_width		= sdhci_set_bus_width,
+	.reset			= sdhci_xenon_reset,
+	.set_uhs_signaling	= xenon_set_uhs_signaling,
+	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
+};
+
+static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
+	.ops = &sdhci_xenon_ops,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		  SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+/*
+ * Xenon Specific Operations in mmc_host_ops
+ */
+static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned long flags;
+	u32 reg;
+
+	/*
+	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
+	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
+	 * Disable Preset Value register for HS400/HS200.
+	 * eMMC HS with preset_enabled set will trigger a bug in
+	 * get_preset_value().
+	 */
+	spin_lock_irqsave(&host->lock, flags);
+	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+	    (ios->timing == MMC_TIMING_MMC_HS200) ||
+	    (ios->timing == MMC_TIMING_MMC_HS)) {
+		host->preset_enabled = false;
+		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
+	} else {
+		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	sdhci_set_ios(mmc, ios);
+
+	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
+		spin_lock_irqsave(&host->lock, flags);
+		xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+}
+
+static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
+					    struct mmc_ios *ios)
+{
+	unsigned char voltage = ios->signal_voltage;
+	struct sdhci_host *host = mmc_priv(mmc);
+	unsigned char voltage_code;
+	u32 ctrl;
+
+	if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
+	    (voltage == MMC_SIGNAL_VOLTAGE_180)) {
+		if (voltage == MMC_SIGNAL_VOLTAGE_330)
+			voltage_code = SDHCI_EMMC_VCCQ_3_3V;
+		else if (voltage == MMC_SIGNAL_VOLTAGE_180)
+			voltage_code = SDHCI_EMMC_VCCQ_1_8V;
+
+		/*
+		 * This host is for eMMC, XENON self-defined
+		 * eMMC control register should be accessed
+		 * instead of Host Control 2
+		 */
+		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+		ctrl &= ~SDHCI_EMMC_VCCQ_MASK;
+		ctrl |= voltage_code;
+		sdhci_writel(host, ctrl, SDHCI_SLOT_EMMC_CTRL);
+
+		/* There is no standard to determine this waiting period */
+		usleep_range(1000, 2000);
+
+		/* Check whether io voltage switch is done */
+		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+		ctrl &= SDHCI_EMMC_VCCQ_MASK;
+		/*
+		 * This bit is set only when regulator feeds back
+		 * the voltage switch results to Xenon SDHC.
+		 * However, in actaul implementation, regulator might not
+		 * provide this feedback.
+		 * Thus we shall not rely on this bit to determine
+		 * if switch failed.
+		 * If the bit is not set, just throw a message.
+		 * Besides, error code should not be returned.
+		 */
+		if (ctrl != voltage_code)
+			dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
+		return 0;
+	}
+
+	dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
+	return -EINVAL;
+}
+
+static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
+					     struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	/*
+	 * Before SD/SDIO set signal voltage, SD bus clock should be
+	 * disabled. However, sdhci_set_clock will also disable the Internal
+	 * clock in mmc_set_signal_voltage().
+	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
+	 * Thus here manually enable internal clock.
+	 *
+	 * After switch completes, it is unnecessary to disable internal clock,
+	 * since keeping internal clock active obeys SD spec.
+	 */
+	enable_xenon_internal_clk(host);
+
+	if (priv->init_card_type == MMC_TYPE_MMC)
+		return xenon_emmc_signal_voltage_switch(mmc, ios);
+
+	return sdhci_start_signal_voltage_switch(mmc, ios);
+}
+
+/*
+ * Update card type.
+ * priv->init_card_type will be used in PHY timing adjustment.
+ */
+static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	/* Update card type*/
+	priv->init_card_type = card->type;
+}
+
+static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	if (host->timing == MMC_TIMING_UHS_DDR50)
+		return 0;
+
+	return sdhci_execute_tuning(mmc, opcode);
+}
+
+static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+	u8 sdhc_id = priv->sdhc_id;
+
+	sdhci_enable_sdio_irq(mmc, enable);
+
+	if (enable) {
+		/*
+		 * Set SDIO Card Inserted indication
+		 * to enable detecting SDIO async irq.
+		 */
+		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		reg |= (1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
+		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
+	} else {
+		/* Clear SDIO Card Inserted indication */
+		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		reg &= ~(1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
+		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
+	}
+}
+
+static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
+{
+	host->mmc_host_ops.set_ios = xenon_set_ios;
+	host->mmc_host_ops.start_signal_voltage_switch =
+			xenon_start_signal_voltage_switch;
+	host->mmc_host_ops.init_card = xenon_init_card;
+	host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
+	host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
+}
+
+/*
+ * Parse child node in Xenon DT.
+ * Search for the following item(s):
+ * - eMMC card type
+ */
+static int xenon_child_node_of_parse(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct device_node *child;
+	int nr_child;
+
+	priv->init_card_type = SDHCI_CARD_TYPE_UNKNOWN;
+
+	nr_child = of_get_child_count(np);
+	if (!nr_child)
+		return 0;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, "mmc-card"))	{
+			priv->init_card_type = MMC_TYPE_MMC;
+			mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+			/*
+			 * Force to clear BUS_TEST to
+			 * skip bus_test_pre and bus_test_post
+			 */
+			mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
+			mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
+				      MMC_CAP2_PACKED_CMD |
+				      MMC_CAP2_NO_SD |
+				      MMC_CAP2_NO_SDIO;
+		}
+	}
+
+	return 0;
+}
+
+static int xenon_probe_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int err;
+	u32 sdhc_id, nr_sdhc;
+	u32 tuning_count;
+
+	/* Standard MMC property */
+	err = mmc_of_parse(mmc);
+	if (err)
+		return err;
+
+	/* Standard SDHCI property */
+	sdhci_get_of_property(pdev);
+
+	/*
+	 * Xenon Specific property:
+	 * init_card_type: check whether this SDHC is for eMMC
+	 * sdhc-id: the index of current SDHC.
+	 *	    Refer to SDHCI_SYS_CFG_INFO register
+	 * tun-count: the interval between re-tuning
+	 */
+	/* Parse child node, including checking emmc type */
+	err = xenon_child_node_of_parse(pdev);
+	if (err)
+		return err;
+
+	priv->sdhc_id = 0x0;
+	if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
+		nr_sdhc = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		nr_sdhc &= SDHCI_NR_SUPPORTED_SLOT_MASK;
+		if (unlikely(sdhc_id > nr_sdhc)) {
+			dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
+				sdhc_id, nr_sdhc);
+			return -EINVAL;
+		}
+	}
+
+	tuning_count = SDHCI_DEF_TUNING_COUNT;
+	if (!of_property_read_u32(np, "marvell,xenon-tun-count",
+				  &tuning_count)) {
+		if (unlikely(tuning_count >= SDHCI_TMR_RETUN_NO_PRESENT)) {
+			dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
+				SDHCI_DEF_TUNING_COUNT);
+			tuning_count = SDHCI_DEF_TUNING_COUNT;
+		}
+	}
+	priv->tuning_count = tuning_count;
+
+	return err;
+}
+
+static int xenon_sdhc_probe(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u8 sdhc_id = priv->sdhc_id;
+
+	/* Enable SDHC */
+	xenon_enable_sdhc(host, sdhc_id);
+
+	/* Enable ACG */
+	xenon_set_acg(host, true);
+
+	/* Enable Parallel Transfer Mode */
+	xenon_enable_sdhc_parallel_tran(host, sdhc_id);
+
+	/* Set tuning functionality of this SDHC */
+	xenon_sdhc_tuning_setup(host);
+
+	return 0;
+}
+
+static void xenon_sdhc_remove(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u8 sdhc_id = priv->sdhc_id;
+
+	/* disable SDHC */
+	xenon_disable_sdhc(host, sdhc_id);
+}
+
+static int sdhci_xenon_probe(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_host *host;
+	struct sdhci_xenon_priv *priv;
+	int err;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
+				sizeof(struct sdhci_xenon_priv));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	priv = sdhci_pltfm_priv(pltfm_host);
+
+	xenon_set_acg(host, false);
+
+	/*
+	 * Link Xenon specific mmc_host_ops function,
+	 * to replace standard ones in sdhci_ops.
+	 */
+	xenon_replace_mmc_host_ops(host);
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(pltfm_host->clk)) {
+		err = PTR_ERR(pltfm_host->clk);
+		dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
+		goto free_pltfm;
+	}
+	err = clk_prepare_enable(pltfm_host->clk);
+	if (err)
+		goto free_pltfm;
+
+	err = xenon_probe_dt(pdev);
+	if (err)
+		goto err_clk;
+
+	err = xenon_sdhc_probe(host);
+	if (err)
+		goto err_clk;
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto remove_sdhc;
+
+	return 0;
+
+remove_sdhc:
+	xenon_sdhc_remove(host);
+err_clk:
+	clk_disable_unprepare(pltfm_host->clk);
+free_pltfm:
+	sdhci_pltfm_free(pdev);
+	return err;
+}
+
+static int sdhci_xenon_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
+
+	xenon_sdhc_remove(host);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(pltfm_host->clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id sdhci_xenon_dt_ids[] = {
+	{ .compatible = "marvell,armada-7000-sdhci",},
+	{ .compatible = "marvell,armada-3700-sdhci",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
+
+static struct platform_driver sdhci_xenon_driver = {
+	.driver	= {
+		.name	= "xenon-sdhci",
+		.of_match_table = sdhci_xenon_dt_ids,
+		.pm = &sdhci_pltfm_pmops,
+	},
+	.probe	= sdhci_xenon_probe,
+	.remove	= sdhci_xenon_remove,
+};
+
+module_platform_driver(sdhci_xenon_driver);
+
+MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
+MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
new file mode 100644
index 000000000000..d50cd663a265
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+#ifndef SDHCI_XENON_H_
+#define SDHCI_XENON_H_
+
+
+/* Register Offset of Xenon SDHC self-defined register */
+#define SDHCI_SYS_CFG_INFO			0x0104
+#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
+#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
+
+#define SDHCI_SYS_OP_CTRL			0x0108
+#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
+#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
+#define SDHCI_SLOT_ENABLE_SHIFT			0
+
+#define SDHCI_SYS_EXT_OP_CTRL			0x010C
+
+#define SDHCI_SLOT_EMMC_CTRL			0x0130
+#define SDHCI_EMMC_VCCQ_MASK			0x3
+#define SDHCI_EMMC_VCCQ_1_8V			0x1
+#define SDHCI_EMMC_VCCQ_3_3V			0x3
+
+#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
+/* retuning compatible */
+#define SDHCI_RETUNING_COMPATIBLE		0x1
+
+/* Tuning Parameter */
+#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
+#define SDHCI_DEF_TUNING_COUNT			0x9
+
+#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
+
+/* Xenon specific Mode Select value */
+#define SDHCI_XENON_CTRL_HS200			0x5
+#define SDHCI_XENON_CTRL_HS400			0x6
+
+/* Indicate Card Type is not clear yet */
+#define SDHCI_CARD_TYPE_UNKNOWN			0xF
+
+struct sdhci_xenon_priv {
+	unsigned char	tuning_count;
+	/* idx of SDHC */
+	u8		sdhc_id;
+
+	/*
+	 * eMMC/SD/SDIO require different PHY settings or
+	 * voltage control. It's necessary for Xenon driver to
+	 * recognize card type during, or even before initialization.
+	 * However, mmc_host->card is not available yet at that time.
+	 * This field records the card type during init.
+	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
+	 * updated in xenon_init_card().
+	 *
+	 * It is only valid during initialization after it is updated.
+	 * Do not access this variable in normal transfers after
+	 * initialization completes.
+	 */
+	unsigned int	init_card_type;
+};
+
+#endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Add Xenon eMMC/SD/SDIO host controller core functionality.
Add Xenon specific intialization process.
Add Xenon specific mmc_host_ops APIs.
Add Xenon specific register definitions.

Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.

Marvell Xenon SDHC conforms to SD Physical Layer Specification
Version 3.01 and is designed according to the guidelines provided
in the SD Host Controller Standard Specification Version 3.00.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 MAINTAINERS                    |   1 +-
 drivers/mmc/host/Kconfig       |   9 +-
 drivers/mmc/host/Makefile      |   3 +-
 drivers/mmc/host/sdhci-xenon.c | 612 ++++++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.h |  70 ++++-
 5 files changed, 695 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-xenon.c
 create mode 100644 drivers/mmc/host/sdhci-xenon.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 850a0afb0c8d..bb33286aeb48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
 M:	Ziji Hu <huziji@marvell.com>
 L:	linux-mmc at vger.kernel.org
 S:	Supported
+F:	drivers/mmc/host/sdhci-xenon*
 F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
 
 MATROX FRAMEBUFFER DRIVER
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5274f503a39a..85a53623526a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -798,3 +798,12 @@ config MMC_SDHCI_BRCMSTB
 	  Broadcom STB SoCs.
 
 	  If unsure, say Y.
+
+config MMC_SDHCI_XENON
+	tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
+	depends on MMC_SDHCI && MMC_SDHCI_PLTFM
+	help
+	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
+	  If you have a machine with integrated Marvell Xenon SDHC IP,
+	  say Y or M here.
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index e2bdaaf43184..75eaf743486c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -80,3 +80,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB)		+= sdhci-brcmstb.o
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
 endif
+
+obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
+sdhci-xenon-driver-y		+= sdhci-xenon.o
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
new file mode 100644
index 000000000000..c71439fbc308
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -0,0 +1,612 @@
+/*
+ * Driver for Marvell Xenon SDHC as a platform device
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * Inspired by Jisheng Zhang <jszhang@marvell.com>
+ * Special thanks to Video BG4 project team.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+static int enable_xenon_internal_clk(struct sdhci_host *host)
+{
+	u32 reg;
+	u8 timeout;
+
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_INT_EN;
+	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+			& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			pr_err("%s: Internal clock never stabilised.\n",
+			       mmc_hostname(host->mmc));
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+/* Set SDCLK-off-while-idle */
+static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
+				     unsigned char sdhc_id, bool enable)
+{
+	u32 reg;
+	u32 mask;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	/* Get the bit shift basing on the SDHC index */
+	mask = (0x1 << (SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable/Disable the Auto Clock Gating function */
+static void xenon_set_acg(struct sdhci_host *host, bool enable)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	if (enable)
+		reg &= ~SDHCI_AUTO_CLKGATE_DISABLE_MASK;
+	else
+		reg |= SDHCI_AUTO_CLKGATE_DISABLE_MASK;
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable this SDHC */
+static void xenon_enable_sdhc(struct sdhci_host *host,
+			      unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	reg |= (BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+
+	/*
+	 * Manually set the flag which all the card types require,
+	 * including SD, eMMC, SDIO
+	 */
+	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+}
+
+/* Disable this SDHC */
+static void xenon_disable_sdhc(struct sdhci_host *host,
+			       unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
+	reg &= ~(BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
+}
+
+/* Enable Parallel Transfer Mode */
+static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
+					    unsigned char sdhc_id)
+{
+	u32 reg;
+
+	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
+	reg |= BIT(sdhc_id);
+	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
+}
+
+static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+
+	/* Disable the Re-Tuning Request functionality */
+	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
+	reg &= ~SDHCI_RETUNING_COMPATIBLE;
+	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
+
+	/* Disable the Re-tuning Event Signal Enable */
+	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
+	reg &= ~SDHCI_INT_RETUNE;
+	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
+
+	/* Force to use Tuning Mode 1 */
+	host->tuning_mode = SDHCI_TUNING_MODE_1;
+	/* Set re-tuning period */
+	host->tuning_count = 1 << (priv->tuning_count - 1);
+}
+
+/*
+ * Operations inside struct sdhci_ops
+ */
+/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
+static void sdhci_xenon_reset_exit(struct sdhci_host *host,
+				   unsigned char sdhc_id, u8 mask)
+{
+	/* Only SOFTWARE RESET ALL will clear the register setting */
+	if (!(mask & SDHCI_RESET_ALL))
+		return;
+
+	/* Disable tuning request and auto-retuning again */
+	xenon_sdhc_tuning_setup(host);
+
+	xenon_set_acg(host, true);
+
+	xenon_set_sdclk_off_idle(host, sdhc_id, false);
+}
+
+static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_reset(host, mask);
+	sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
+}
+
+/*
+ * Xenon defines different values for HS200 and HS400
+ * in Host_Control_2
+ */
+static void xenon_set_uhs_signaling(struct sdhci_host *host,
+				    unsigned int timing)
+{
+	u16 ctrl_2;
+
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	if (timing == MMC_TIMING_MMC_HS200)
+		ctrl_2 |= SDHCI_XENON_CTRL_HS200;
+	else if (timing == MMC_TIMING_UHS_SDR104)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+	else if (timing == MMC_TIMING_UHS_SDR12)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+	else if (timing == MMC_TIMING_UHS_SDR25)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+	else if (timing == MMC_TIMING_UHS_SDR50)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+	else if ((timing == MMC_TIMING_UHS_DDR50) ||
+		 (timing == MMC_TIMING_MMC_DDR52))
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+	else if (timing == MMC_TIMING_MMC_HS400)
+		ctrl_2 |= SDHCI_XENON_CTRL_HS400;
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static const struct sdhci_ops sdhci_xenon_ops = {
+	.set_clock		= sdhci_set_clock,
+	.set_bus_width		= sdhci_set_bus_width,
+	.reset			= sdhci_xenon_reset,
+	.set_uhs_signaling	= xenon_set_uhs_signaling,
+	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
+};
+
+static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
+	.ops = &sdhci_xenon_ops,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		  SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+/*
+ * Xenon Specific Operations in mmc_host_ops
+ */
+static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned long flags;
+	u32 reg;
+
+	/*
+	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
+	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
+	 * Disable Preset Value register for HS400/HS200.
+	 * eMMC HS with preset_enabled set will trigger a bug in
+	 * get_preset_value().
+	 */
+	spin_lock_irqsave(&host->lock, flags);
+	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+	    (ios->timing == MMC_TIMING_MMC_HS200) ||
+	    (ios->timing == MMC_TIMING_MMC_HS)) {
+		host->preset_enabled = false;
+		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
+	} else {
+		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	sdhci_set_ios(mmc, ios);
+
+	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
+		spin_lock_irqsave(&host->lock, flags);
+		xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+}
+
+static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
+					    struct mmc_ios *ios)
+{
+	unsigned char voltage = ios->signal_voltage;
+	struct sdhci_host *host = mmc_priv(mmc);
+	unsigned char voltage_code;
+	u32 ctrl;
+
+	if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
+	    (voltage == MMC_SIGNAL_VOLTAGE_180)) {
+		if (voltage == MMC_SIGNAL_VOLTAGE_330)
+			voltage_code = SDHCI_EMMC_VCCQ_3_3V;
+		else if (voltage == MMC_SIGNAL_VOLTAGE_180)
+			voltage_code = SDHCI_EMMC_VCCQ_1_8V;
+
+		/*
+		 * This host is for eMMC, XENON self-defined
+		 * eMMC control register should be accessed
+		 * instead of Host Control 2
+		 */
+		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+		ctrl &= ~SDHCI_EMMC_VCCQ_MASK;
+		ctrl |= voltage_code;
+		sdhci_writel(host, ctrl, SDHCI_SLOT_EMMC_CTRL);
+
+		/* There is no standard to determine this waiting period */
+		usleep_range(1000, 2000);
+
+		/* Check whether io voltage switch is done */
+		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+		ctrl &= SDHCI_EMMC_VCCQ_MASK;
+		/*
+		 * This bit is set only when regulator feeds back
+		 * the voltage switch results to Xenon SDHC.
+		 * However, in actaul implementation, regulator might not
+		 * provide this feedback.
+		 * Thus we shall not rely on this bit to determine
+		 * if switch failed.
+		 * If the bit is not set, just throw a message.
+		 * Besides, error code should not be returned.
+		 */
+		if (ctrl != voltage_code)
+			dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
+		return 0;
+	}
+
+	dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
+	return -EINVAL;
+}
+
+static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
+					     struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	/*
+	 * Before SD/SDIO set signal voltage, SD bus clock should be
+	 * disabled. However, sdhci_set_clock will also disable the Internal
+	 * clock in mmc_set_signal_voltage().
+	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
+	 * Thus here manually enable internal clock.
+	 *
+	 * After switch completes, it is unnecessary to disable internal clock,
+	 * since keeping internal clock active obeys SD spec.
+	 */
+	enable_xenon_internal_clk(host);
+
+	if (priv->init_card_type == MMC_TYPE_MMC)
+		return xenon_emmc_signal_voltage_switch(mmc, ios);
+
+	return sdhci_start_signal_voltage_switch(mmc, ios);
+}
+
+/*
+ * Update card type.
+ * priv->init_card_type will be used in PHY timing adjustment.
+ */
+static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	/* Update card type*/
+	priv->init_card_type = card->type;
+}
+
+static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	if (host->timing == MMC_TIMING_UHS_DDR50)
+		return 0;
+
+	return sdhci_execute_tuning(mmc, opcode);
+}
+
+static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+	u8 sdhc_id = priv->sdhc_id;
+
+	sdhci_enable_sdio_irq(mmc, enable);
+
+	if (enable) {
+		/*
+		 * Set SDIO Card Inserted indication
+		 * to enable detecting SDIO async irq.
+		 */
+		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		reg |= (1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
+		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
+	} else {
+		/* Clear SDIO Card Inserted indication */
+		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		reg &= ~(1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
+		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
+	}
+}
+
+static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
+{
+	host->mmc_host_ops.set_ios = xenon_set_ios;
+	host->mmc_host_ops.start_signal_voltage_switch =
+			xenon_start_signal_voltage_switch;
+	host->mmc_host_ops.init_card = xenon_init_card;
+	host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
+	host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
+}
+
+/*
+ * Parse child node in Xenon DT.
+ * Search for the following item(s):
+ * - eMMC card type
+ */
+static int xenon_child_node_of_parse(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct device_node *child;
+	int nr_child;
+
+	priv->init_card_type = SDHCI_CARD_TYPE_UNKNOWN;
+
+	nr_child = of_get_child_count(np);
+	if (!nr_child)
+		return 0;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, "mmc-card"))	{
+			priv->init_card_type = MMC_TYPE_MMC;
+			mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+			/*
+			 * Force to clear BUS_TEST to
+			 * skip bus_test_pre and bus_test_post
+			 */
+			mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
+			mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
+				      MMC_CAP2_PACKED_CMD |
+				      MMC_CAP2_NO_SD |
+				      MMC_CAP2_NO_SDIO;
+		}
+	}
+
+	return 0;
+}
+
+static int xenon_probe_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int err;
+	u32 sdhc_id, nr_sdhc;
+	u32 tuning_count;
+
+	/* Standard MMC property */
+	err = mmc_of_parse(mmc);
+	if (err)
+		return err;
+
+	/* Standard SDHCI property */
+	sdhci_get_of_property(pdev);
+
+	/*
+	 * Xenon Specific property:
+	 * init_card_type: check whether this SDHC is for eMMC
+	 * sdhc-id: the index of current SDHC.
+	 *	    Refer to SDHCI_SYS_CFG_INFO register
+	 * tun-count: the interval between re-tuning
+	 */
+	/* Parse child node, including checking emmc type */
+	err = xenon_child_node_of_parse(pdev);
+	if (err)
+		return err;
+
+	priv->sdhc_id = 0x0;
+	if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
+		nr_sdhc = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
+		nr_sdhc &= SDHCI_NR_SUPPORTED_SLOT_MASK;
+		if (unlikely(sdhc_id > nr_sdhc)) {
+			dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
+				sdhc_id, nr_sdhc);
+			return -EINVAL;
+		}
+	}
+
+	tuning_count = SDHCI_DEF_TUNING_COUNT;
+	if (!of_property_read_u32(np, "marvell,xenon-tun-count",
+				  &tuning_count)) {
+		if (unlikely(tuning_count >= SDHCI_TMR_RETUN_NO_PRESENT)) {
+			dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
+				SDHCI_DEF_TUNING_COUNT);
+			tuning_count = SDHCI_DEF_TUNING_COUNT;
+		}
+	}
+	priv->tuning_count = tuning_count;
+
+	return err;
+}
+
+static int xenon_sdhc_probe(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u8 sdhc_id = priv->sdhc_id;
+
+	/* Enable SDHC */
+	xenon_enable_sdhc(host, sdhc_id);
+
+	/* Enable ACG */
+	xenon_set_acg(host, true);
+
+	/* Enable Parallel Transfer Mode */
+	xenon_enable_sdhc_parallel_tran(host, sdhc_id);
+
+	/* Set tuning functionality of this SDHC */
+	xenon_sdhc_tuning_setup(host);
+
+	return 0;
+}
+
+static void xenon_sdhc_remove(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	u8 sdhc_id = priv->sdhc_id;
+
+	/* disable SDHC */
+	xenon_disable_sdhc(host, sdhc_id);
+}
+
+static int sdhci_xenon_probe(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_host *host;
+	struct sdhci_xenon_priv *priv;
+	int err;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
+				sizeof(struct sdhci_xenon_priv));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	priv = sdhci_pltfm_priv(pltfm_host);
+
+	xenon_set_acg(host, false);
+
+	/*
+	 * Link Xenon specific mmc_host_ops function,
+	 * to replace standard ones in sdhci_ops.
+	 */
+	xenon_replace_mmc_host_ops(host);
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(pltfm_host->clk)) {
+		err = PTR_ERR(pltfm_host->clk);
+		dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
+		goto free_pltfm;
+	}
+	err = clk_prepare_enable(pltfm_host->clk);
+	if (err)
+		goto free_pltfm;
+
+	err = xenon_probe_dt(pdev);
+	if (err)
+		goto err_clk;
+
+	err = xenon_sdhc_probe(host);
+	if (err)
+		goto err_clk;
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto remove_sdhc;
+
+	return 0;
+
+remove_sdhc:
+	xenon_sdhc_remove(host);
+err_clk:
+	clk_disable_unprepare(pltfm_host->clk);
+free_pltfm:
+	sdhci_pltfm_free(pdev);
+	return err;
+}
+
+static int sdhci_xenon_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
+
+	xenon_sdhc_remove(host);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(pltfm_host->clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id sdhci_xenon_dt_ids[] = {
+	{ .compatible = "marvell,armada-7000-sdhci",},
+	{ .compatible = "marvell,armada-3700-sdhci",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
+
+static struct platform_driver sdhci_xenon_driver = {
+	.driver	= {
+		.name	= "xenon-sdhci",
+		.of_match_table = sdhci_xenon_dt_ids,
+		.pm = &sdhci_pltfm_pmops,
+	},
+	.probe	= sdhci_xenon_probe,
+	.remove	= sdhci_xenon_remove,
+};
+
+module_platform_driver(sdhci_xenon_driver);
+
+MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
+MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
new file mode 100644
index 000000000000..d50cd663a265
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+#ifndef SDHCI_XENON_H_
+#define SDHCI_XENON_H_
+
+
+/* Register Offset of Xenon SDHC self-defined register */
+#define SDHCI_SYS_CFG_INFO			0x0104
+#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
+#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
+
+#define SDHCI_SYS_OP_CTRL			0x0108
+#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
+#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
+#define SDHCI_SLOT_ENABLE_SHIFT			0
+
+#define SDHCI_SYS_EXT_OP_CTRL			0x010C
+
+#define SDHCI_SLOT_EMMC_CTRL			0x0130
+#define SDHCI_EMMC_VCCQ_MASK			0x3
+#define SDHCI_EMMC_VCCQ_1_8V			0x1
+#define SDHCI_EMMC_VCCQ_3_3V			0x3
+
+#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
+/* retuning compatible */
+#define SDHCI_RETUNING_COMPATIBLE		0x1
+
+/* Tuning Parameter */
+#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
+#define SDHCI_DEF_TUNING_COUNT			0x9
+
+#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
+
+/* Xenon specific Mode Select value */
+#define SDHCI_XENON_CTRL_HS200			0x5
+#define SDHCI_XENON_CTRL_HS400			0x6
+
+/* Indicate Card Type is not clear yet */
+#define SDHCI_CARD_TYPE_UNKNOWN			0xF
+
+struct sdhci_xenon_priv {
+	unsigned char	tuning_count;
+	/* idx of SDHC */
+	u8		sdhc_id;
+
+	/*
+	 * eMMC/SD/SDIO require different PHY settings or
+	 * voltage control. It's necessary for Xenon driver to
+	 * recognize card type during, or even before initialization.
+	 * However, mmc_host->card is not available yet at that time.
+	 * This field records the card type during init.
+	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
+	 * updated in xenon_init_card().
+	 *
+	 * It is only valid during initialization after it is updated.
+	 * Do not access this variable in normal transfers after
+	 * initialization completes.
+	 */
+	unsigned int	init_card_type;
+};
+
+#endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
Multiple types of PHYs are supported.

Add support to multiple types of PHYs init and configuration.
Add register definitions of PHYs.

Xenon PHY cannot fit in kernel common PHY framework.
Xenon SDHC PHY register is a part of Xenon SDHC register set.
Besides, MMC initialization has to call several PHY functions
to complete timing setting.
Those PHY setting functions have to access SDHC registers
and know current MMC setting, such as bus width, clock frequency
and speed mode.
As a result, implement Xenon PHY in MMC host directory.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/Makefile          |   2 +-
 drivers/mmc/host/sdhci-xenon-phy.c | 799 ++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.c     |   3 +-
 drivers/mmc/host/sdhci-xenon.h     |  39 +-
 4 files changed, 841 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c

diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 75eaf743486c..4f2854556ff7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
 endif
 
 obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
-sdhci-xenon-driver-y		+= sdhci-xenon.o
+sdhci-xenon-driver-y		+= sdhci-xenon.o sdhci-xenon-phy.o
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000000..453c5076761c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,799 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define SDHCI_EMMC_5_0_PHY_REG_BASE		0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define SDHCI_EMMC_PHY_REG_BASE			0x0170
+
+#define SDHCI_EMMC_PHY_TIMING_ADJUST		SDHCI_EMMC_PHY_REG_BASE
+#define SDHCI_EMMC_5_0_PHY_TIMING_ADJUST	SDHCI_EMMC_5_0_PHY_REG_BASE
+#define SDHCI_TIMING_ADJUST_SLOW_MODE		BIT(29)
+#define SDHCI_TIMING_ADJUST_SDIO_MODE		BIT(28)
+#define SDHCI_OUTPUT_QSN_PHASE_SELECT		BIT(17)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT	BIT(18)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT_SHIFT	18
+#define SDHCI_PHY_INITIALIZAION			BIT(31)
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_MASK	0xF
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT	12
+#define SDHCI_FC_SYNC_EN_DURATION_MASK		0xF
+#define SDHCI_FC_SYNC_EN_DURATION_SHIFT		8
+#define SDHCI_FC_SYNC_RST_EN_DURATION_MASK	0xF
+#define SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT	4
+#define SDHCI_FC_SYNC_RST_DURATION_MASK		0xF
+#define SDHCI_FC_SYNC_RST_DURATION_SHIFT	0
+
+#define SDHCI_EMMC_PHY_FUNC_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x4)
+#define SDHCI_EMMC_5_0_PHY_FUNC_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x4)
+#define SDHCI_ASYNC_DDRMODE_MASK		BIT(23)
+#define SDHCI_ASYNC_DDRMODE_SHIFT		23
+#define SDHCI_CMD_DDR_MODE			BIT(16)
+#define SDHCI_DQ_DDR_MODE_SHIFT			8
+#define SDHCI_DQ_DDR_MODE_MASK			0xFF
+#define SDHCI_DQ_ASYNC_MODE			BIT(4)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x8)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x8)
+#define SDHCI_REC_EN_SHIFT			24
+#define SDHCI_REC_EN_MASK			0xF
+#define SDHCI_FC_DQ_RECEN			BIT(24)
+#define SDHCI_FC_CMD_RECEN			BIT(25)
+#define SDHCI_FC_QSP_RECEN			BIT(26)
+#define SDHCI_FC_QSN_RECEN			BIT(27)
+#define SDHCI_OEN_QSN				BIT(28)
+#define SDHCI_AUTO_RECEN_CTRL			BIT(30)
+#define SDHCI_FC_ALL_CMOS_RECEIVER		0xF000
+
+#define SDHCI_EMMC5_FC_QSP_PD			BIT(18)
+#define SDHCI_EMMC5_FC_QSP_PU			BIT(22)
+#define SDHCI_EMMC5_FC_CMD_PD			BIT(17)
+#define SDHCI_EMMC5_FC_CMD_PU			BIT(21)
+#define SDHCI_EMMC5_FC_DQ_PD			BIT(16)
+#define SDHCI_EMMC5_FC_DQ_PU			BIT(20)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL1		(SDHCI_EMMC_PHY_REG_BASE + 0xC)
+#define SDHCI_EMMC5_1_FC_QSP_PD			BIT(9)
+#define SDHCI_EMMC5_1_FC_QSP_PU			BIT(25)
+#define SDHCI_EMMC5_1_FC_CMD_PD			BIT(8)
+#define SDHCI_EMMC5_1_FC_CMD_PU			BIT(24)
+#define SDHCI_EMMC5_1_FC_DQ_PD			0xFF
+#define SDHCI_EMMC5_1_FC_DQ_PU			(0xFF << 16)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL2		(SDHCI_EMMC_PHY_REG_BASE + 0x10)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL2		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0xC)
+#define SDHCI_ZNR_MASK				0x1F
+#define SDHCI_ZNR_SHIFT				8
+#define SDHCI_ZPR_MASK				0x1F
+/* Perferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define SDHCI_ZNR_DEF_VALUE			0xF
+#define SDHCI_ZPR_DEF_VALUE			0xF
+
+#define SDHCI_EMMC_PHY_DLL_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_5_0_PHY_DLL_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x10)
+#define SDHCI_DLL_ENABLE			BIT(31)
+#define SDHCI_DLL_UPDATE_STROBE_5_0		BIT(30)
+#define SDHCI_DLL_REFCLK_SEL			BIT(30)
+#define SDHCI_DLL_UPDATE			BIT(23)
+#define SDHCI_DLL_PHSEL1_SHIFT			24
+#define SDHCI_DLL_PHSEL0_SHIFT			16
+#define SDHCI_DLL_PHASE_MASK			0x3F
+#define SDHCI_DLL_PHASE_90_DEGREE		0x1F
+#define SDHCI_DLL_FAST_LOCK			BIT(5)
+#define SDHCI_DLL_GAIN2X			BIT(3)
+#define SDHCI_DLL_BYPASS_EN			BIT(0)
+
+#define SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST	\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST	(SDHCI_EMMC_PHY_REG_BASE + 0x18)
+#define SDHCI_LOGIC_TIMING_VALUE		0x00AA8977
+
+enum soc_pad_ctrl_type {
+	SOC_PAD_SD,
+	SOC_PAD_FIXED_1_8V,
+};
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+	/* Offset of Timing Adjust register */
+	u16 timing_adj;
+	/* Offset of Func Control register */
+	u16 func_ctrl;
+	/* Offset of Pad Control register */
+	u16 pad_ctrl;
+	/* Offset of Pad Control register 2 */
+	u16 pad_ctrl2;
+	/* Offset of DLL Control register */
+	u16 dll_ctrl;
+	/* Offset of Logic Timing Adjust register */
+	u16 logic_timing_adj;
+	/* DLL Update Enable bit */
+	u32 dll_update;
+};
+
+static const char * const phy_types[] = {
+	"emmc 5.0 phy",
+	"emmc 5.1 phy"
+};
+
+enum phy_type_enum {
+	EMMC_5_0_PHY,
+	EMMC_5_1_PHY,
+	NR_PHY_TYPES
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+	.timing_adj	= SDHCI_EMMC_5_0_PHY_TIMING_ADJUST,
+	.func_ctrl	= SDHCI_EMMC_5_0_PHY_FUNC_CONTROL,
+	.pad_ctrl	= SDHCI_EMMC_5_0_PHY_PAD_CONTROL,
+	.pad_ctrl2	= SDHCI_EMMC_5_0_PHY_PAD_CONTROL2,
+	.dll_ctrl	= SDHCI_EMMC_5_0_PHY_DLL_CONTROL,
+	.logic_timing_adj = SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= SDHCI_DLL_UPDATE_STROBE_5_0,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+	.timing_adj	= SDHCI_EMMC_PHY_TIMING_ADJUST,
+	.func_ctrl	= SDHCI_EMMC_PHY_FUNC_CONTROL,
+	.pad_ctrl	= SDHCI_EMMC_PHY_PAD_CONTROL,
+	.pad_ctrl2	= SDHCI_EMMC_PHY_PAD_CONTROL2,
+	.dll_ctrl	= SDHCI_EMMC_PHY_DLL_CONTROL,
+	.logic_timing_adj = SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= SDHCI_DLL_UPDATE,
+};
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct emmc_phy_params {
+	bool	slow_mode;
+
+	u8	znr;
+	u8	zpr;
+
+	/* Nr of consecutive Sampling Points of a Valid Sampling Window */
+	u8	nr_tun_times;
+	/* Divider for calculating Tuning Step */
+	u8	tun_step_divider;
+};
+
+static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
+{
+	struct emmc_phy_params *params;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	priv->phy_params = params;
+	if (priv->phy_type == EMMC_5_0_PHY)
+		priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+	else
+		priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+	return 0;
+}
+
+/*
+ * eMMC 5.0/5.1 PHY init/re-init.
+ * eMMC PHY init should be executed after:
+ * 1. SDCLK frequecny changes.
+ * 2. SDCLK is stopped and re-enabled.
+ * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl
+ * are changed
+ */
+static int emmc_phy_init(struct sdhci_host *host)
+{
+	u32 reg;
+	u32 wait, clock;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg |= SDHCI_PHY_INITIALIZAION;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	/* Add duration of FC_SYNC_RST */
+	wait = ((reg >> SDHCI_FC_SYNC_RST_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_RST_DURATION_MASK);
+	/* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+	wait += ((reg >> SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_RST_EN_DURATION_MASK);
+	/* Add duration of asserting FC_SYNC_EN */
+	wait += ((reg >> SDHCI_FC_SYNC_EN_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_EN_DURATION_MASK);
+	/* Add duration of waiting for PHY */
+	wait += ((reg >> SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT) &
+			SDHCI_WAIT_CYCLE_BEFORE_USING_MASK);
+	/* 4 addtional bus clock and 4 AXI bus clock are required */
+	wait += 8;
+	wait <<= 20;
+
+	clock = host->clock;
+	if (!clock)
+		/* Use the possibly slowest bus frequency value */
+		clock = SDHCI_LOWEST_SDCLK_FREQ;
+	/* get the wait time */
+	wait /= clock;
+	wait++;
+	/* wait for host eMMC PHY init completes */
+	udelay(wait);
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg &= SDHCI_PHY_INITIALIZAION;
+	if (reg) {
+		dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+			wait);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/*
+ * Enable eMMC PHY HW DLL
+ * DLL should be enabled and stable before HS200/SDR104 tuning,
+ * and before HS400 data strobe setting.
+ */
+static int emmc_phy_enable_dll(struct sdhci_host *host)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u8 timeout;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	if (reg & SDHCI_DLL_ENABLE)
+		return 0;
+
+	/* Enable DLL */
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	reg |= (SDHCI_DLL_ENABLE | SDHCI_DLL_FAST_LOCK);
+
+	/*
+	 * Set Phase as 90 degree, which is most common value.
+	 * Might set another value if necessary.
+	 * The granularity is 1 degree.
+	 */
+	reg &= ~((SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL0_SHIFT) |
+		 (SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL1_SHIFT));
+	reg |= ((SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL0_SHIFT) |
+		(SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL1_SHIFT));
+
+	reg &= ~SDHCI_DLL_BYPASS_EN;
+	reg |= phy_regs->dll_update;
+	if (priv->phy_type == EMMC_5_1_PHY)
+		reg &= ~SDHCI_DLL_REFCLK_SEL;
+	sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+	/* Wait max 32 ms */
+	timeout = 32;
+	while (!(sdhci_readw(host, SDHCI_SLOT_EXT_PRESENT_STATE) &
+		SDHCI_DLL_LOCK_STATE)) {
+		if (!timeout) {
+			dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+	return 0;
+}
+
+/*
+ * Config to eMMC PHY to prepare for tuning.
+ * Enable HW DLL and set the TUNING_STEP
+ */
+static int emmc_phy_config_tuning(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	u32 reg, tuning_step;
+	int ret;
+	unsigned long flags;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	ret = emmc_phy_enable_dll(host);
+	if (ret) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return ret;
+	}
+
+	/* Achieve TUNGING_STEP with HW DLL help */
+	reg = sdhci_readl(host, SDHCI_SLOT_DLL_CUR_DLY_VAL);
+	tuning_step = reg / params->tun_step_divider;
+	if (unlikely(tuning_step > SDHCI_TUNING_STEP_MASK)) {
+		dev_warn(mmc_dev(host->mmc),
+			 "HS200 TUNING_STEP %d is larger than MAX value\n",
+			 tuning_step);
+		tuning_step = SDHCI_TUNING_STEP_MASK;
+	}
+
+	/* Set TUNING_STEP for later tuning */
+	reg = sdhci_readl(host, SDHCI_SLOT_OP_STATUS_CTRL);
+	reg &= ~(SDHCI_TUN_CONSECUTIVE_TIMES_MASK <<
+		 SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg |= (params->nr_tun_times << SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg &= ~(SDHCI_TUNING_STEP_MASK << SDHCI_TUNING_STEP_SHIFT);
+	reg |= (tuning_step << SDHCI_TUNING_STEP_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SLOT_OP_STATUS_CTRL);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return 0;
+}
+
+static void __emmc_phy_disable_data_strobe(struct sdhci_host *host)
+{
+	u32 reg;
+
+	/* Disable SDHC Data Strobe */
+	reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+	reg &= ~SDHCI_ENABLE_DATA_STROBE;
+	sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+}
+
+/* Set HS400 Data Strobe */
+static void emmc_phy_strobe_delay_adj(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned long flags;
+	u32 reg;
+
+	if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400))
+		return;
+
+	if (host->clock <= MMC_HIGH_52_MAX_DTR)
+		return;
+
+	dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	emmc_phy_enable_dll(host);
+
+	/* Enable SDHC Data Strobe */
+	reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+	reg |= SDHCI_ENABLE_DATA_STROBE;
+	sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+
+	/* Set Data Strobe Pull down */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= SDHCI_EMMC5_FC_QSP_PD;
+		reg &= ~SDHCI_EMMC5_FC_QSP_PU;
+		sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+		reg |= SDHCI_EMMC5_1_FC_QSP_PD;
+		reg &= ~SDHCI_EMMC5_1_FC_QSP_PU;
+		sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static inline bool temp_stage_hs200_to_hs400(struct sdhci_host *host,
+					     struct sdhci_xenon_priv *priv)
+{
+	/*
+	 * Tmep stages from HS200 to HS400
+	 * from HS200 to HS in 200MHz
+	 * from 200MHz to 52MHz
+	 */
+	if (((priv->timing == MMC_TIMING_MMC_HS200) &&
+	     (host->timing == MMC_TIMING_MMC_HS)) ||
+	    ((host->timing == MMC_TIMING_MMC_HS) &&
+	     (priv->clock > host->clock)))
+		return true;
+
+	return false;
+}
+
+static inline bool temp_stage_hs400_to_h200(struct sdhci_host *host,
+					    struct sdhci_xenon_priv *priv)
+{
+	/*
+	 * Temp stages from HS400 t0 HS200:
+	 * from 200MHz to 52MHz in HS400
+	 * from HS400 to HS DDR in 52MHz
+	 * from HS DDR to HS in 52MHz
+	 * from HS to HS200 in 52MHz
+	 */
+	if (((priv->timing == MMC_TIMING_MMC_HS400) &&
+	     ((host->clock == MMC_HIGH_52_MAX_DTR) ||
+	      (host->timing == MMC_TIMING_MMC_DDR52))) ||
+	    ((priv->timing == MMC_TIMING_MMC_DDR52) &&
+	     (host->timing == MMC_TIMING_MMC_HS)) ||
+	    ((host->timing == MMC_TIMING_MMC_HS200) &&
+	     (host->clock == MMC_HIGH_52_MAX_DTR)))
+		return true;
+
+	return false;
+}
+
+/*
+ * If eMMC PHY Slow Mode is required in lower speed mode in SDR mode
+ * (SDLCK < 55MHz), enable Slow Mode to bypass eMMC PHY.
+ * SDIO slower SDR mode also requires Slow Mode.
+ *
+ * If Slow Mode is enabled, return true.
+ * Otherwise, return false.
+ */
+static bool emmc_phy_slow_mode(struct sdhci_host *host,
+			       unsigned char timing)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u32 reg;
+
+	/* Skip temp stages from HS200 to HS400 */
+	if (temp_stage_hs200_to_hs400(host, priv))
+		return false;
+
+	/* Skip temp stages from HS400 t0 HS200 */
+	if (temp_stage_hs400_to_h200(host, priv))
+		return false;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	/* Enable Slow Mode for SDIO in slower SDR mode */
+	if ((priv->init_card_type == MMC_TYPE_SDIO) &&
+	    ((timing == MMC_TIMING_UHS_SDR25) ||
+	     (timing == MMC_TIMING_UHS_SDR12) ||
+	     (timing == MMC_TIMING_SD_HS) ||
+	     (timing == MMC_TIMING_LEGACY))) {
+		reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+		return true;
+	}
+
+	/* Check if Slow Mode is required in lower speed mode in SDR mode */
+	if (((timing == MMC_TIMING_UHS_SDR50) ||
+	     (timing == MMC_TIMING_UHS_SDR25) ||
+	     (timing == MMC_TIMING_UHS_SDR12) ||
+	     (timing == MMC_TIMING_SD_HS) ||
+	     (timing == MMC_TIMING_MMC_HS) ||
+	     (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
+		reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+		return true;
+	}
+
+	reg &= ~SDHCI_TIMING_ADJUST_SLOW_MODE;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+	return false;
+}
+
+/*
+ * Set-up eMMC 5.0/5.1 PHY.
+ * Specific onfiguration depends on the current speed mode in use.
+ */
+static void emmc_phy_set(struct sdhci_host *host,
+			 unsigned char timing)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	unsigned long flags;
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
+	reg |= SDHCI_MASK_CMD_CONFLICT_ERROR;
+	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
+
+	/* Setup pad, set bit[28] and bits[26:24] */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl);
+	reg |= (SDHCI_FC_DQ_RECEN | SDHCI_FC_CMD_RECEN |
+		SDHCI_FC_QSP_RECEN | SDHCI_OEN_QSN);
+	/* All FC_XX_RECEIVCE should be set as CMOS Type */
+	reg |= SDHCI_FC_ALL_CMOS_RECEIVER;
+	sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+	/* Set CMD and DQ Pull Up */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= (SDHCI_EMMC5_FC_CMD_PU | SDHCI_EMMC5_FC_DQ_PU);
+		reg &= ~(SDHCI_EMMC5_FC_CMD_PD | SDHCI_EMMC5_FC_DQ_PD);
+		sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+		reg |= (SDHCI_EMMC5_1_FC_CMD_PU | SDHCI_EMMC5_1_FC_DQ_PU);
+		reg &= ~(SDHCI_EMMC5_1_FC_CMD_PD | SDHCI_EMMC5_1_FC_DQ_PD);
+		sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+	}
+
+	if (timing == MMC_TIMING_LEGACY)
+		goto phy_init;
+
+	/*
+	 * FIXME: should depends on the specific board timing.
+	 */
+	if ((timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_HS200) ||
+	    (timing == MMC_TIMING_UHS_SDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR104) ||
+	    (timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR25) ||
+	    (timing == MMC_TIMING_MMC_DDR52)) {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg &= ~SDHCI_OUTPUT_QSN_PHASE_SELECT;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	}
+
+	/*
+	 * If SDIO card, set SDIO Mode
+	 * Otherwise, clear SDIO Mode
+	 */
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	if (priv->init_card_type == MMC_TYPE_SDIO)
+		reg |= SDHCI_TIMING_ADJUST_SDIO_MODE;
+	else
+		reg &= ~SDHCI_TIMING_ADJUST_SDIO_MODE;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	if (emmc_phy_slow_mode(host, timing))
+		goto phy_init;
+
+	/*
+	 * Set preferred ZNR and ZPR value
+	 * The ZNR and ZPR value vary between different boards.
+	 * Define them both in sdhci-xenon-emmc-phy.h.
+	 */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+	reg &= ~((SDHCI_ZNR_MASK << SDHCI_ZNR_SHIFT) | SDHCI_ZPR_MASK);
+	reg |= ((params->znr << SDHCI_ZNR_SHIFT) | params->zpr);
+	sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+	/*
+	 * When setting EMMC_PHY_FUNC_CONTROL register,
+	 * SD clock should be disabled
+	 */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	reg = sdhci_readl(host, phy_regs->func_ctrl);
+	if ((timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_DDR52))
+		reg |= (SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+		       SDHCI_CMD_DDR_MODE;
+	else
+		reg &= ~((SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+			 SDHCI_CMD_DDR_MODE);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		reg &= ~SDHCI_DQ_ASYNC_MODE;
+	else
+		reg |= SDHCI_DQ_ASYNC_MODE;
+	sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+	/* Enable bus clock */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		/* Hardware team recommend a value for HS400 */
+		sdhci_writel(host, SDHCI_LOGIC_TIMING_VALUE,
+			     phy_regs->logic_timing_adj);
+	else
+		__emmc_phy_disable_data_strobe(host);
+
+phy_init:
+	emmc_phy_init(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int emmc_phy_parse_param_dt(struct sdhci_host *host,
+				   struct device_node *np,
+				   struct emmc_phy_params *params)
+{
+	u32 value;
+
+	if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+		params->slow_mode = true;
+	else
+		params->slow_mode = false;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+		params->znr = value & SDHCI_ZNR_MASK;
+	else
+		params->znr = SDHCI_ZNR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+		params->zpr = value & SDHCI_ZPR_MASK;
+	else
+		params->zpr = SDHCI_ZPR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
+				  &value))
+		params->nr_tun_times = value & SDHCI_TUN_CONSECUTIVE_TIMES_MASK;
+	else
+		params->nr_tun_times = SDHCI_TUN_CONSECUTIVE_TIMES;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
+				  &value))
+		params->tun_step_divider = value & 0xFF;
+	else
+		params->tun_step_divider = SDHCI_TUNING_STEP_DIVIDER;
+
+	return 0;
+}
+
+/*
+ * Setting PHY when card is working in High Speed Mode.
+ * HS400 set data strobe line.
+ * HS200/SDR104 set tuning config to prepare for tuning.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host)
+{
+	int ret = 0;
+
+	if (WARN_ON(host->clock <= SDHCI_DEFAULT_SDCLK_FREQ))
+		return -EINVAL;
+
+	if (host->timing == MMC_TIMING_MMC_HS400) {
+		emmc_phy_strobe_delay_adj(host);
+		return 0;
+	}
+
+	if ((host->timing == MMC_TIMING_MMC_HS200) ||
+	    (host->timing == MMC_TIMING_UHS_SDR104)) {
+		ret = emmc_phy_config_tuning(host);
+		if (!ret)
+			return 0;
+	}
+
+	/*
+	 * DDR Mode requires driver to scan Sampling Fixed Delay Line,
+	 * to find out a perfect operation sampling point.
+	 * It is hard to implement such a scan in host driver since initiating
+	 * commands by host driver is not safe.
+	 * Thus so far just keep PHY Sampling Fixed Delay in default value
+	 * in DDR mode.
+	 *
+	 * If any timing issue occrus in DDR mode on Marvell products,
+	 * please contact maintainer to ask for internal support in Marvell.
+	 */
+	if ((host->timing == MMC_TIMING_MMC_DDR52) ||
+	    (host->timing == MMC_TIMING_UHS_DDR50))
+		dev_warn(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n");
+	return ret;
+}
+
+/*
+ * Adjust PHY setting.
+ * PHY setting should be adjusted when SDCLK frequency, Bus Width
+ * or Speed Mode is changed.
+ * Addtional config are required when card is working in High Speed mode,
+ * after leaving Legacy Mode.
+ */
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret = 0;
+
+	if (!host->clock) {
+		priv->clock = 0;
+		return 0;
+	}
+
+	/*
+	 * The timing, frequency or bus width is changed,
+	 * better to set eMMC PHY based on current setting
+	 * and adjust Xenon SDHC delay.
+	 */
+	if ((host->clock == priv->clock) &&
+	    (ios->bus_width == priv->bus_width) &&
+	    (ios->timing == priv->timing))
+		return 0;
+
+	emmc_phy_set(host, ios->timing);
+
+	/* Update the record */
+	priv->bus_width = ios->bus_width;
+
+	/* Skip temp stages from HS200 to HS400 */
+	if (temp_stage_hs200_to_hs400(host, priv))
+		return 0;
+
+	/* Skip temp stages from HS400 t0 HS200 */
+	if (temp_stage_hs400_to_h200(host, priv))
+		return 0;
+
+	priv->timing = ios->timing;
+	priv->clock = host->clock;
+
+	/* Legacy mode is a special case */
+	if (ios->timing == MMC_TIMING_LEGACY)
+		return 0;
+
+	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ)
+		ret = xenon_hs_delay_adj(host);
+	return ret;
+}
+
+static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
+			 const char *phy_name)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int i, ret;
+
+	for (i = 0; i < NR_PHY_TYPES; i++) {
+		if (!strcmp(phy_name, phy_types[i])) {
+			priv->phy_type = i;
+			break;
+		}
+	}
+	if (i == NR_PHY_TYPES) {
+		dev_err(mmc_dev(host->mmc),
+			"Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+			phy_name);
+		priv->phy_type = EMMC_5_1_PHY;
+	}
+
+	ret = alloc_emmc_phy(priv);
+	if (ret)
+		return ret;
+
+	return emmc_phy_parse_param_dt(host, np, priv->phy_params);
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+	const char *phy_type = NULL;
+
+	if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
+		return add_xenon_phy(np, host, phy_type);
+
+	dev_info(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
+	return add_xenon_phy(np, host, "emmc 5.1 phy");
+}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c71439fbc308..0347de533777 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -244,6 +244,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	sdhci_set_ios(mmc, ios);
+	xenon_phy_adj(host, ios);
 
 	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
 		spin_lock_irqsave(&host->lock, flags);
@@ -481,7 +482,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
 	}
 	priv->tuning_count = tuning_count;
 
-	return err;
+	return xenon_phy_parse_dt(np, host);
 }
 
 static int xenon_sdhc_probe(struct sdhci_host *host)
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index d50cd663a265..86b5d2b1f1aa 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -23,8 +23,19 @@
 #define SDHCI_SLOT_ENABLE_SHIFT			0
 
 #define SDHCI_SYS_EXT_OP_CTRL			0x010C
+#define SDHCI_MASK_CMD_CONFLICT_ERROR		BIT(8)
+
+#define SDHCI_SLOT_OP_STATUS_CTRL		0x0128
+
+#define SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT	16
+#define SDHCI_TUN_CONSECUTIVE_TIMES_MASK	0x7
+#define SDHCI_TUN_CONSECUTIVE_TIMES		0x4
+#define SDHCI_TUNING_STEP_SHIFT			12
+#define SDHCI_TUNING_STEP_MASK			0xF
+#define SDHCI_TUNING_STEP_DIVIDER		BIT(6)
 
 #define SDHCI_SLOT_EMMC_CTRL			0x0130
+#define SDHCI_ENABLE_DATA_STROBE		BIT(24)
 #define SDHCI_EMMC_VCCQ_MASK			0x3
 #define SDHCI_EMMC_VCCQ_1_8V			0x1
 #define SDHCI_EMMC_VCCQ_3_3V			0x3
@@ -33,11 +44,17 @@
 /* retuning compatible */
 #define SDHCI_RETUNING_COMPATIBLE		0x1
 
+#define SDHCI_SLOT_EXT_PRESENT_STATE		0x014C
+#define SDHCI_DLL_LOCK_STATE			0x1
+
+#define SDHCI_SLOT_DLL_CUR_DLY_VAL		0x0150
+
 /* Tuning Parameter */
 #define SDHCI_TMR_RETUN_NO_PRESENT		0xF
 #define SDHCI_DEF_TUNING_COUNT			0x9
 
 #define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
+#define SDHCI_LOWEST_SDCLK_FREQ			(100000)
 
 /* Xenon specific Mode Select value */
 #define SDHCI_XENON_CTRL_HS200			0x5
@@ -65,6 +82,28 @@ struct sdhci_xenon_priv {
 	 * initialization completes.
 	 */
 	unsigned int	init_card_type;
+
+	/*
+	 * The bus_width, timing, and clock fields in below
+	 * record the current ios setting of Xenon SDHC.
+	 * Driver will adjust PHY setting if any change to
+	 * ios affects PHY timing.
+	 */
+	unsigned char	bus_width;
+	unsigned char	timing;
+	unsigned int	clock;
+
+	int		phy_type;
+	/*
+	 * Contains board-specific PHY parameters
+	 * passed from device tree.
+	 */
+	void		*phy_params;
+	struct xenon_emmc_phy_regs *emmc_phy_regs;
 };
 
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+int xenon_phy_parse_dt(struct device_node *np,
+		       struct sdhci_host *host);
 #endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
Multiple types of PHYs are supported.

Add support to multiple types of PHYs init and configuration.
Add register definitions of PHYs.

Xenon PHY cannot fit in kernel common PHY framework.
Xenon SDHC PHY register is a part of Xenon SDHC register set.
Besides, MMC initialization has to call several PHY functions
to complete timing setting.
Those PHY setting functions have to access SDHC registers
and know current MMC setting, such as bus width, clock frequency
and speed mode.
As a result, implement Xenon PHY in MMC host directory.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/Makefile          |   2 +-
 drivers/mmc/host/sdhci-xenon-phy.c | 799 ++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.c     |   3 +-
 drivers/mmc/host/sdhci-xenon.h     |  39 +-
 4 files changed, 841 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c

diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 75eaf743486c..4f2854556ff7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
 endif
 
 obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
-sdhci-xenon-driver-y		+= sdhci-xenon.o
+sdhci-xenon-driver-y		+= sdhci-xenon.o sdhci-xenon-phy.o
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000000..453c5076761c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,799 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author:	Hu Ziji <huziji@marvell.com>
+ * Date:	2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define SDHCI_EMMC_5_0_PHY_REG_BASE		0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define SDHCI_EMMC_PHY_REG_BASE			0x0170
+
+#define SDHCI_EMMC_PHY_TIMING_ADJUST		SDHCI_EMMC_PHY_REG_BASE
+#define SDHCI_EMMC_5_0_PHY_TIMING_ADJUST	SDHCI_EMMC_5_0_PHY_REG_BASE
+#define SDHCI_TIMING_ADJUST_SLOW_MODE		BIT(29)
+#define SDHCI_TIMING_ADJUST_SDIO_MODE		BIT(28)
+#define SDHCI_OUTPUT_QSN_PHASE_SELECT		BIT(17)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT	BIT(18)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT_SHIFT	18
+#define SDHCI_PHY_INITIALIZAION			BIT(31)
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_MASK	0xF
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT	12
+#define SDHCI_FC_SYNC_EN_DURATION_MASK		0xF
+#define SDHCI_FC_SYNC_EN_DURATION_SHIFT		8
+#define SDHCI_FC_SYNC_RST_EN_DURATION_MASK	0xF
+#define SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT	4
+#define SDHCI_FC_SYNC_RST_DURATION_MASK		0xF
+#define SDHCI_FC_SYNC_RST_DURATION_SHIFT	0
+
+#define SDHCI_EMMC_PHY_FUNC_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x4)
+#define SDHCI_EMMC_5_0_PHY_FUNC_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x4)
+#define SDHCI_ASYNC_DDRMODE_MASK		BIT(23)
+#define SDHCI_ASYNC_DDRMODE_SHIFT		23
+#define SDHCI_CMD_DDR_MODE			BIT(16)
+#define SDHCI_DQ_DDR_MODE_SHIFT			8
+#define SDHCI_DQ_DDR_MODE_MASK			0xFF
+#define SDHCI_DQ_ASYNC_MODE			BIT(4)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x8)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x8)
+#define SDHCI_REC_EN_SHIFT			24
+#define SDHCI_REC_EN_MASK			0xF
+#define SDHCI_FC_DQ_RECEN			BIT(24)
+#define SDHCI_FC_CMD_RECEN			BIT(25)
+#define SDHCI_FC_QSP_RECEN			BIT(26)
+#define SDHCI_FC_QSN_RECEN			BIT(27)
+#define SDHCI_OEN_QSN				BIT(28)
+#define SDHCI_AUTO_RECEN_CTRL			BIT(30)
+#define SDHCI_FC_ALL_CMOS_RECEIVER		0xF000
+
+#define SDHCI_EMMC5_FC_QSP_PD			BIT(18)
+#define SDHCI_EMMC5_FC_QSP_PU			BIT(22)
+#define SDHCI_EMMC5_FC_CMD_PD			BIT(17)
+#define SDHCI_EMMC5_FC_CMD_PU			BIT(21)
+#define SDHCI_EMMC5_FC_DQ_PD			BIT(16)
+#define SDHCI_EMMC5_FC_DQ_PU			BIT(20)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL1		(SDHCI_EMMC_PHY_REG_BASE + 0xC)
+#define SDHCI_EMMC5_1_FC_QSP_PD			BIT(9)
+#define SDHCI_EMMC5_1_FC_QSP_PU			BIT(25)
+#define SDHCI_EMMC5_1_FC_CMD_PD			BIT(8)
+#define SDHCI_EMMC5_1_FC_CMD_PU			BIT(24)
+#define SDHCI_EMMC5_1_FC_DQ_PD			0xFF
+#define SDHCI_EMMC5_1_FC_DQ_PU			(0xFF << 16)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL2		(SDHCI_EMMC_PHY_REG_BASE + 0x10)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL2		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0xC)
+#define SDHCI_ZNR_MASK				0x1F
+#define SDHCI_ZNR_SHIFT				8
+#define SDHCI_ZPR_MASK				0x1F
+/* Perferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define SDHCI_ZNR_DEF_VALUE			0xF
+#define SDHCI_ZPR_DEF_VALUE			0xF
+
+#define SDHCI_EMMC_PHY_DLL_CONTROL		(SDHCI_EMMC_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_5_0_PHY_DLL_CONTROL		\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x10)
+#define SDHCI_DLL_ENABLE			BIT(31)
+#define SDHCI_DLL_UPDATE_STROBE_5_0		BIT(30)
+#define SDHCI_DLL_REFCLK_SEL			BIT(30)
+#define SDHCI_DLL_UPDATE			BIT(23)
+#define SDHCI_DLL_PHSEL1_SHIFT			24
+#define SDHCI_DLL_PHSEL0_SHIFT			16
+#define SDHCI_DLL_PHASE_MASK			0x3F
+#define SDHCI_DLL_PHASE_90_DEGREE		0x1F
+#define SDHCI_DLL_FAST_LOCK			BIT(5)
+#define SDHCI_DLL_GAIN2X			BIT(3)
+#define SDHCI_DLL_BYPASS_EN			BIT(0)
+
+#define SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST	\
+	(SDHCI_EMMC_5_0_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST	(SDHCI_EMMC_PHY_REG_BASE + 0x18)
+#define SDHCI_LOGIC_TIMING_VALUE		0x00AA8977
+
+enum soc_pad_ctrl_type {
+	SOC_PAD_SD,
+	SOC_PAD_FIXED_1_8V,
+};
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+	/* Offset of Timing Adjust register */
+	u16 timing_adj;
+	/* Offset of Func Control register */
+	u16 func_ctrl;
+	/* Offset of Pad Control register */
+	u16 pad_ctrl;
+	/* Offset of Pad Control register 2 */
+	u16 pad_ctrl2;
+	/* Offset of DLL Control register */
+	u16 dll_ctrl;
+	/* Offset of Logic Timing Adjust register */
+	u16 logic_timing_adj;
+	/* DLL Update Enable bit */
+	u32 dll_update;
+};
+
+static const char * const phy_types[] = {
+	"emmc 5.0 phy",
+	"emmc 5.1 phy"
+};
+
+enum phy_type_enum {
+	EMMC_5_0_PHY,
+	EMMC_5_1_PHY,
+	NR_PHY_TYPES
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+	.timing_adj	= SDHCI_EMMC_5_0_PHY_TIMING_ADJUST,
+	.func_ctrl	= SDHCI_EMMC_5_0_PHY_FUNC_CONTROL,
+	.pad_ctrl	= SDHCI_EMMC_5_0_PHY_PAD_CONTROL,
+	.pad_ctrl2	= SDHCI_EMMC_5_0_PHY_PAD_CONTROL2,
+	.dll_ctrl	= SDHCI_EMMC_5_0_PHY_DLL_CONTROL,
+	.logic_timing_adj = SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= SDHCI_DLL_UPDATE_STROBE_5_0,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+	.timing_adj	= SDHCI_EMMC_PHY_TIMING_ADJUST,
+	.func_ctrl	= SDHCI_EMMC_PHY_FUNC_CONTROL,
+	.pad_ctrl	= SDHCI_EMMC_PHY_PAD_CONTROL,
+	.pad_ctrl2	= SDHCI_EMMC_PHY_PAD_CONTROL2,
+	.dll_ctrl	= SDHCI_EMMC_PHY_DLL_CONTROL,
+	.logic_timing_adj = SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST,
+	.dll_update	= SDHCI_DLL_UPDATE,
+};
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct emmc_phy_params {
+	bool	slow_mode;
+
+	u8	znr;
+	u8	zpr;
+
+	/* Nr of consecutive Sampling Points of a Valid Sampling Window */
+	u8	nr_tun_times;
+	/* Divider for calculating Tuning Step */
+	u8	tun_step_divider;
+};
+
+static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
+{
+	struct emmc_phy_params *params;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	priv->phy_params = params;
+	if (priv->phy_type == EMMC_5_0_PHY)
+		priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+	else
+		priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+	return 0;
+}
+
+/*
+ * eMMC 5.0/5.1 PHY init/re-init.
+ * eMMC PHY init should be executed after:
+ * 1. SDCLK frequecny changes.
+ * 2. SDCLK is stopped and re-enabled.
+ * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl
+ * are changed
+ */
+static int emmc_phy_init(struct sdhci_host *host)
+{
+	u32 reg;
+	u32 wait, clock;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg |= SDHCI_PHY_INITIALIZAION;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	/* Add duration of FC_SYNC_RST */
+	wait = ((reg >> SDHCI_FC_SYNC_RST_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_RST_DURATION_MASK);
+	/* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+	wait += ((reg >> SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_RST_EN_DURATION_MASK);
+	/* Add duration of asserting FC_SYNC_EN */
+	wait += ((reg >> SDHCI_FC_SYNC_EN_DURATION_SHIFT) &
+			SDHCI_FC_SYNC_EN_DURATION_MASK);
+	/* Add duration of waiting for PHY */
+	wait += ((reg >> SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT) &
+			SDHCI_WAIT_CYCLE_BEFORE_USING_MASK);
+	/* 4 addtional bus clock and 4 AXI bus clock are required */
+	wait += 8;
+	wait <<= 20;
+
+	clock = host->clock;
+	if (!clock)
+		/* Use the possibly slowest bus frequency value */
+		clock = SDHCI_LOWEST_SDCLK_FREQ;
+	/* get the wait time */
+	wait /= clock;
+	wait++;
+	/* wait for host eMMC PHY init completes */
+	udelay(wait);
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	reg &= SDHCI_PHY_INITIALIZAION;
+	if (reg) {
+		dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+			wait);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/*
+ * Enable eMMC PHY HW DLL
+ * DLL should be enabled and stable before HS200/SDR104 tuning,
+ * and before HS400 data strobe setting.
+ */
+static int emmc_phy_enable_dll(struct sdhci_host *host)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u8 timeout;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	if (reg & SDHCI_DLL_ENABLE)
+		return 0;
+
+	/* Enable DLL */
+	reg = sdhci_readl(host, phy_regs->dll_ctrl);
+	reg |= (SDHCI_DLL_ENABLE | SDHCI_DLL_FAST_LOCK);
+
+	/*
+	 * Set Phase as 90 degree, which is most common value.
+	 * Might set another value if necessary.
+	 * The granularity is 1 degree.
+	 */
+	reg &= ~((SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL0_SHIFT) |
+		 (SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL1_SHIFT));
+	reg |= ((SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL0_SHIFT) |
+		(SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL1_SHIFT));
+
+	reg &= ~SDHCI_DLL_BYPASS_EN;
+	reg |= phy_regs->dll_update;
+	if (priv->phy_type == EMMC_5_1_PHY)
+		reg &= ~SDHCI_DLL_REFCLK_SEL;
+	sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+	/* Wait max 32 ms */
+	timeout = 32;
+	while (!(sdhci_readw(host, SDHCI_SLOT_EXT_PRESENT_STATE) &
+		SDHCI_DLL_LOCK_STATE)) {
+		if (!timeout) {
+			dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		mdelay(1);
+	}
+	return 0;
+}
+
+/*
+ * Config to eMMC PHY to prepare for tuning.
+ * Enable HW DLL and set the TUNING_STEP
+ */
+static int emmc_phy_config_tuning(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	u32 reg, tuning_step;
+	int ret;
+	unsigned long flags;
+
+	if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+		return -EINVAL;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	ret = emmc_phy_enable_dll(host);
+	if (ret) {
+		spin_unlock_irqrestore(&host->lock, flags);
+		return ret;
+	}
+
+	/* Achieve TUNGING_STEP with HW DLL help */
+	reg = sdhci_readl(host, SDHCI_SLOT_DLL_CUR_DLY_VAL);
+	tuning_step = reg / params->tun_step_divider;
+	if (unlikely(tuning_step > SDHCI_TUNING_STEP_MASK)) {
+		dev_warn(mmc_dev(host->mmc),
+			 "HS200 TUNING_STEP %d is larger than MAX value\n",
+			 tuning_step);
+		tuning_step = SDHCI_TUNING_STEP_MASK;
+	}
+
+	/* Set TUNING_STEP for later tuning */
+	reg = sdhci_readl(host, SDHCI_SLOT_OP_STATUS_CTRL);
+	reg &= ~(SDHCI_TUN_CONSECUTIVE_TIMES_MASK <<
+		 SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg |= (params->nr_tun_times << SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+	reg &= ~(SDHCI_TUNING_STEP_MASK << SDHCI_TUNING_STEP_SHIFT);
+	reg |= (tuning_step << SDHCI_TUNING_STEP_SHIFT);
+	sdhci_writel(host, reg, SDHCI_SLOT_OP_STATUS_CTRL);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return 0;
+}
+
+static void __emmc_phy_disable_data_strobe(struct sdhci_host *host)
+{
+	u32 reg;
+
+	/* Disable SDHC Data Strobe */
+	reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+	reg &= ~SDHCI_ENABLE_DATA_STROBE;
+	sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+}
+
+/* Set HS400 Data Strobe */
+static void emmc_phy_strobe_delay_adj(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned long flags;
+	u32 reg;
+
+	if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400))
+		return;
+
+	if (host->clock <= MMC_HIGH_52_MAX_DTR)
+		return;
+
+	dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	emmc_phy_enable_dll(host);
+
+	/* Enable SDHC Data Strobe */
+	reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+	reg |= SDHCI_ENABLE_DATA_STROBE;
+	sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+
+	/* Set Data Strobe Pull down */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= SDHCI_EMMC5_FC_QSP_PD;
+		reg &= ~SDHCI_EMMC5_FC_QSP_PU;
+		sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+		reg |= SDHCI_EMMC5_1_FC_QSP_PD;
+		reg &= ~SDHCI_EMMC5_1_FC_QSP_PU;
+		sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static inline bool temp_stage_hs200_to_hs400(struct sdhci_host *host,
+					     struct sdhci_xenon_priv *priv)
+{
+	/*
+	 * Tmep stages from HS200 to HS400
+	 * from HS200 to HS in 200MHz
+	 * from 200MHz to 52MHz
+	 */
+	if (((priv->timing == MMC_TIMING_MMC_HS200) &&
+	     (host->timing == MMC_TIMING_MMC_HS)) ||
+	    ((host->timing == MMC_TIMING_MMC_HS) &&
+	     (priv->clock > host->clock)))
+		return true;
+
+	return false;
+}
+
+static inline bool temp_stage_hs400_to_h200(struct sdhci_host *host,
+					    struct sdhci_xenon_priv *priv)
+{
+	/*
+	 * Temp stages from HS400 t0 HS200:
+	 * from 200MHz to 52MHz in HS400
+	 * from HS400 to HS DDR in 52MHz
+	 * from HS DDR to HS in 52MHz
+	 * from HS to HS200 in 52MHz
+	 */
+	if (((priv->timing == MMC_TIMING_MMC_HS400) &&
+	     ((host->clock == MMC_HIGH_52_MAX_DTR) ||
+	      (host->timing == MMC_TIMING_MMC_DDR52))) ||
+	    ((priv->timing == MMC_TIMING_MMC_DDR52) &&
+	     (host->timing == MMC_TIMING_MMC_HS)) ||
+	    ((host->timing == MMC_TIMING_MMC_HS200) &&
+	     (host->clock == MMC_HIGH_52_MAX_DTR)))
+		return true;
+
+	return false;
+}
+
+/*
+ * If eMMC PHY Slow Mode is required in lower speed mode in SDR mode
+ * (SDLCK < 55MHz), enable Slow Mode to bypass eMMC PHY.
+ * SDIO slower SDR mode also requires Slow Mode.
+ *
+ * If Slow Mode is enabled, return true.
+ * Otherwise, return false.
+ */
+static bool emmc_phy_slow_mode(struct sdhci_host *host,
+			       unsigned char timing)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	u32 reg;
+
+	/* Skip temp stages from HS200 to HS400 */
+	if (temp_stage_hs200_to_hs400(host, priv))
+		return false;
+
+	/* Skip temp stages from HS400 t0 HS200 */
+	if (temp_stage_hs400_to_h200(host, priv))
+		return false;
+
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	/* Enable Slow Mode for SDIO in slower SDR mode */
+	if ((priv->init_card_type == MMC_TYPE_SDIO) &&
+	    ((timing == MMC_TIMING_UHS_SDR25) ||
+	     (timing == MMC_TIMING_UHS_SDR12) ||
+	     (timing == MMC_TIMING_SD_HS) ||
+	     (timing == MMC_TIMING_LEGACY))) {
+		reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+		return true;
+	}
+
+	/* Check if Slow Mode is required in lower speed mode in SDR mode */
+	if (((timing == MMC_TIMING_UHS_SDR50) ||
+	     (timing == MMC_TIMING_UHS_SDR25) ||
+	     (timing == MMC_TIMING_UHS_SDR12) ||
+	     (timing == MMC_TIMING_SD_HS) ||
+	     (timing == MMC_TIMING_MMC_HS) ||
+	     (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
+		reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+		return true;
+	}
+
+	reg &= ~SDHCI_TIMING_ADJUST_SLOW_MODE;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+	return false;
+}
+
+/*
+ * Set-up eMMC 5.0/5.1 PHY.
+ * Specific onfiguration depends on the current speed mode in use.
+ */
+static void emmc_phy_set(struct sdhci_host *host,
+			 unsigned char timing)
+{
+	u32 reg;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+	unsigned long flags;
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
+	reg |= SDHCI_MASK_CMD_CONFLICT_ERROR;
+	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
+
+	/* Setup pad, set bit[28] and bits[26:24] */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl);
+	reg |= (SDHCI_FC_DQ_RECEN | SDHCI_FC_CMD_RECEN |
+		SDHCI_FC_QSP_RECEN | SDHCI_OEN_QSN);
+	/* All FC_XX_RECEIVCE should be set as CMOS Type */
+	reg |= SDHCI_FC_ALL_CMOS_RECEIVER;
+	sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+	/* Set CMD and DQ Pull Up */
+	if (priv->phy_type == EMMC_5_0_PHY) {
+		reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+		reg |= (SDHCI_EMMC5_FC_CMD_PU | SDHCI_EMMC5_FC_DQ_PU);
+		reg &= ~(SDHCI_EMMC5_FC_CMD_PD | SDHCI_EMMC5_FC_DQ_PD);
+		sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+	} else {
+		reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+		reg |= (SDHCI_EMMC5_1_FC_CMD_PU | SDHCI_EMMC5_1_FC_DQ_PU);
+		reg &= ~(SDHCI_EMMC5_1_FC_CMD_PD | SDHCI_EMMC5_1_FC_DQ_PD);
+		sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+	}
+
+	if (timing == MMC_TIMING_LEGACY)
+		goto phy_init;
+
+	/*
+	 * FIXME: should depends on the specific board timing.
+	 */
+	if ((timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_HS200) ||
+	    (timing == MMC_TIMING_UHS_SDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR104) ||
+	    (timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_UHS_SDR25) ||
+	    (timing == MMC_TIMING_MMC_DDR52)) {
+		reg = sdhci_readl(host, phy_regs->timing_adj);
+		reg &= ~SDHCI_OUTPUT_QSN_PHASE_SELECT;
+		sdhci_writel(host, reg, phy_regs->timing_adj);
+	}
+
+	/*
+	 * If SDIO card, set SDIO Mode
+	 * Otherwise, clear SDIO Mode
+	 */
+	reg = sdhci_readl(host, phy_regs->timing_adj);
+	if (priv->init_card_type == MMC_TYPE_SDIO)
+		reg |= SDHCI_TIMING_ADJUST_SDIO_MODE;
+	else
+		reg &= ~SDHCI_TIMING_ADJUST_SDIO_MODE;
+	sdhci_writel(host, reg, phy_regs->timing_adj);
+
+	if (emmc_phy_slow_mode(host, timing))
+		goto phy_init;
+
+	/*
+	 * Set preferred ZNR and ZPR value
+	 * The ZNR and ZPR value vary between different boards.
+	 * Define them both in sdhci-xenon-emmc-phy.h.
+	 */
+	reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+	reg &= ~((SDHCI_ZNR_MASK << SDHCI_ZNR_SHIFT) | SDHCI_ZPR_MASK);
+	reg |= ((params->znr << SDHCI_ZNR_SHIFT) | params->zpr);
+	sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+	/*
+	 * When setting EMMC_PHY_FUNC_CONTROL register,
+	 * SD clock should be disabled
+	 */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	reg = sdhci_readl(host, phy_regs->func_ctrl);
+	if ((timing == MMC_TIMING_UHS_DDR50) ||
+	    (timing == MMC_TIMING_MMC_HS400) ||
+	    (timing == MMC_TIMING_MMC_DDR52))
+		reg |= (SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+		       SDHCI_CMD_DDR_MODE;
+	else
+		reg &= ~((SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+			 SDHCI_CMD_DDR_MODE);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		reg &= ~SDHCI_DQ_ASYNC_MODE;
+	else
+		reg |= SDHCI_DQ_ASYNC_MODE;
+	sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+	/* Enable bus clock */
+	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+	reg |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	if (timing == MMC_TIMING_MMC_HS400)
+		/* Hardware team recommend a value for HS400 */
+		sdhci_writel(host, SDHCI_LOGIC_TIMING_VALUE,
+			     phy_regs->logic_timing_adj);
+	else
+		__emmc_phy_disable_data_strobe(host);
+
+phy_init:
+	emmc_phy_init(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int emmc_phy_parse_param_dt(struct sdhci_host *host,
+				   struct device_node *np,
+				   struct emmc_phy_params *params)
+{
+	u32 value;
+
+	if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+		params->slow_mode = true;
+	else
+		params->slow_mode = false;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+		params->znr = value & SDHCI_ZNR_MASK;
+	else
+		params->znr = SDHCI_ZNR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+		params->zpr = value & SDHCI_ZPR_MASK;
+	else
+		params->zpr = SDHCI_ZPR_DEF_VALUE;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
+				  &value))
+		params->nr_tun_times = value & SDHCI_TUN_CONSECUTIVE_TIMES_MASK;
+	else
+		params->nr_tun_times = SDHCI_TUN_CONSECUTIVE_TIMES;
+
+	if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
+				  &value))
+		params->tun_step_divider = value & 0xFF;
+	else
+		params->tun_step_divider = SDHCI_TUNING_STEP_DIVIDER;
+
+	return 0;
+}
+
+/*
+ * Setting PHY when card is working in High Speed Mode.
+ * HS400 set data strobe line.
+ * HS200/SDR104 set tuning config to prepare for tuning.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host)
+{
+	int ret = 0;
+
+	if (WARN_ON(host->clock <= SDHCI_DEFAULT_SDCLK_FREQ))
+		return -EINVAL;
+
+	if (host->timing == MMC_TIMING_MMC_HS400) {
+		emmc_phy_strobe_delay_adj(host);
+		return 0;
+	}
+
+	if ((host->timing == MMC_TIMING_MMC_HS200) ||
+	    (host->timing == MMC_TIMING_UHS_SDR104)) {
+		ret = emmc_phy_config_tuning(host);
+		if (!ret)
+			return 0;
+	}
+
+	/*
+	 * DDR Mode requires driver to scan Sampling Fixed Delay Line,
+	 * to find out a perfect operation sampling point.
+	 * It is hard to implement such a scan in host driver since initiating
+	 * commands by host driver is not safe.
+	 * Thus so far just keep PHY Sampling Fixed Delay in default value
+	 * in DDR mode.
+	 *
+	 * If any timing issue occrus in DDR mode on Marvell products,
+	 * please contact maintainer to ask for internal support in Marvell.
+	 */
+	if ((host->timing == MMC_TIMING_MMC_DDR52) ||
+	    (host->timing == MMC_TIMING_UHS_DDR50))
+		dev_warn(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n");
+	return ret;
+}
+
+/*
+ * Adjust PHY setting.
+ * PHY setting should be adjusted when SDCLK frequency, Bus Width
+ * or Speed Mode is changed.
+ * Addtional config are required when card is working in High Speed mode,
+ * after leaving Legacy Mode.
+ */
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret = 0;
+
+	if (!host->clock) {
+		priv->clock = 0;
+		return 0;
+	}
+
+	/*
+	 * The timing, frequency or bus width is changed,
+	 * better to set eMMC PHY based on current setting
+	 * and adjust Xenon SDHC delay.
+	 */
+	if ((host->clock == priv->clock) &&
+	    (ios->bus_width == priv->bus_width) &&
+	    (ios->timing == priv->timing))
+		return 0;
+
+	emmc_phy_set(host, ios->timing);
+
+	/* Update the record */
+	priv->bus_width = ios->bus_width;
+
+	/* Skip temp stages from HS200 to HS400 */
+	if (temp_stage_hs200_to_hs400(host, priv))
+		return 0;
+
+	/* Skip temp stages from HS400 t0 HS200 */
+	if (temp_stage_hs400_to_h200(host, priv))
+		return 0;
+
+	priv->timing = ios->timing;
+	priv->clock = host->clock;
+
+	/* Legacy mode is a special case */
+	if (ios->timing == MMC_TIMING_LEGACY)
+		return 0;
+
+	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ)
+		ret = xenon_hs_delay_adj(host);
+	return ret;
+}
+
+static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
+			 const char *phy_name)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int i, ret;
+
+	for (i = 0; i < NR_PHY_TYPES; i++) {
+		if (!strcmp(phy_name, phy_types[i])) {
+			priv->phy_type = i;
+			break;
+		}
+	}
+	if (i == NR_PHY_TYPES) {
+		dev_err(mmc_dev(host->mmc),
+			"Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+			phy_name);
+		priv->phy_type = EMMC_5_1_PHY;
+	}
+
+	ret = alloc_emmc_phy(priv);
+	if (ret)
+		return ret;
+
+	return emmc_phy_parse_param_dt(host, np, priv->phy_params);
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+	const char *phy_type = NULL;
+
+	if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
+		return add_xenon_phy(np, host, phy_type);
+
+	dev_info(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
+	return add_xenon_phy(np, host, "emmc 5.1 phy");
+}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c71439fbc308..0347de533777 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -244,6 +244,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	sdhci_set_ios(mmc, ios);
+	xenon_phy_adj(host, ios);
 
 	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
 		spin_lock_irqsave(&host->lock, flags);
@@ -481,7 +482,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
 	}
 	priv->tuning_count = tuning_count;
 
-	return err;
+	return xenon_phy_parse_dt(np, host);
 }
 
 static int xenon_sdhc_probe(struct sdhci_host *host)
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index d50cd663a265..86b5d2b1f1aa 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -23,8 +23,19 @@
 #define SDHCI_SLOT_ENABLE_SHIFT			0
 
 #define SDHCI_SYS_EXT_OP_CTRL			0x010C
+#define SDHCI_MASK_CMD_CONFLICT_ERROR		BIT(8)
+
+#define SDHCI_SLOT_OP_STATUS_CTRL		0x0128
+
+#define SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT	16
+#define SDHCI_TUN_CONSECUTIVE_TIMES_MASK	0x7
+#define SDHCI_TUN_CONSECUTIVE_TIMES		0x4
+#define SDHCI_TUNING_STEP_SHIFT			12
+#define SDHCI_TUNING_STEP_MASK			0xF
+#define SDHCI_TUNING_STEP_DIVIDER		BIT(6)
 
 #define SDHCI_SLOT_EMMC_CTRL			0x0130
+#define SDHCI_ENABLE_DATA_STROBE		BIT(24)
 #define SDHCI_EMMC_VCCQ_MASK			0x3
 #define SDHCI_EMMC_VCCQ_1_8V			0x1
 #define SDHCI_EMMC_VCCQ_3_3V			0x3
@@ -33,11 +44,17 @@
 /* retuning compatible */
 #define SDHCI_RETUNING_COMPATIBLE		0x1
 
+#define SDHCI_SLOT_EXT_PRESENT_STATE		0x014C
+#define SDHCI_DLL_LOCK_STATE			0x1
+
+#define SDHCI_SLOT_DLL_CUR_DLY_VAL		0x0150
+
 /* Tuning Parameter */
 #define SDHCI_TMR_RETUN_NO_PRESENT		0xF
 #define SDHCI_DEF_TUNING_COUNT			0x9
 
 #define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
+#define SDHCI_LOWEST_SDCLK_FREQ			(100000)
 
 /* Xenon specific Mode Select value */
 #define SDHCI_XENON_CTRL_HS200			0x5
@@ -65,6 +82,28 @@ struct sdhci_xenon_priv {
 	 * initialization completes.
 	 */
 	unsigned int	init_card_type;
+
+	/*
+	 * The bus_width, timing, and clock fields in below
+	 * record the current ios setting of Xenon SDHC.
+	 * Driver will adjust PHY setting if any change to
+	 * ios affects PHY timing.
+	 */
+	unsigned char	bus_width;
+	unsigned char	timing;
+	unsigned int	clock;
+
+	int		phy_type;
+	/*
+	 * Contains board-specific PHY parameters
+	 * passed from device tree.
+	 */
+	void		*phy_params;
+	struct xenon_emmc_phy_regs *emmc_phy_regs;
 };
 
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+int xenon_phy_parse_dt(struct device_node *np,
+		       struct sdhci_host *host);
 #endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 09/12] mmc: sdhci-xenon: Add SOC PHY PAD voltage control
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

From: Hu Ziji <huziji@marvell.com>

Some SOCs have PHY PAD outside Xenon IP.
PHY PAD voltage should match signalling voltage in use.

Add generic SOC PHY PAD voltage control interface.
Implement Aramda-3700 SOC PHY PAD voltage control.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci-xenon-phy.c | 111 +++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.c     |   2 +-
 drivers/mmc/host/sdhci-xenon.h     |   2 +-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 453c5076761c..8b06bad34b26 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -148,6 +148,22 @@ enum phy_type_enum {
 	NR_PHY_TYPES
 };
 
+struct soc_pad_ctrl_table {
+	const char *soc;
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
+struct soc_pad_ctrl {
+	/* Register address of SOC PHY PAD ctrl */
+	void __iomem	*reg;
+	/* SOC PHY PAD ctrl type */
+	enum soc_pad_ctrl_type pad_type;
+	/* SOC specific operation to set SOC PHY PAD */
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
 static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
 	.timing_adj	= SDHCI_EMMC_5_0_PHY_TIMING_ADJUST,
 	.func_ctrl	= SDHCI_EMMC_5_0_PHY_FUNC_CONTROL,
@@ -181,6 +197,8 @@ struct emmc_phy_params {
 	u8	nr_tun_times;
 	/* Divider for calculating Tuning Step */
 	u8	tun_step_divider;
+
+	struct soc_pad_ctrl pad_ctrl;
 };
 
 static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
@@ -257,6 +275,45 @@ static int emmc_phy_init(struct sdhci_host *host)
 	return 0;
 }
 
+#define ARMADA_3700_SOC_PAD_1_8V	0x1
+#define ARMADA_3700_SOC_PAD_3_3V	0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+					    unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+		writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+	} else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+		if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+			writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+		else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+			writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+	}
+}
+
+/*
+ * Set SOC PHY voltage PAD control register,
+ * according to the operation voltage on PAD.
+ * The detailed operation depends on SOC implementaion.
+ */
+static void emmc_phy_set_soc_pad(struct sdhci_host *host,
+				 unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (!params->pad_ctrl.reg)
+		return;
+
+	if (params->pad_ctrl.set_soc_pad)
+		params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
 /*
  * Enable eMMC PHY HW DLL
  * DLL should be enabled and stable before HS200/SDR104 tuning,
@@ -630,6 +687,51 @@ static void emmc_phy_set(struct sdhci_host *host,
 	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
 }
 
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+				struct device_node *np,
+				struct emmc_phy_params *params)
+{
+	int ret = 0;
+	const char *name;
+	struct resource iomem;
+
+	if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
+		params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+	else
+		return 0;
+
+	if (of_address_to_resource(np, 1, &iomem)) {
+		dev_err(mmc_dev(host->mmc), "Unable to find SOC PAD ctrl register address for %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+						     &iomem);
+	if (IS_ERR(params->pad_ctrl.reg)) {
+		dev_err(mmc_dev(host->mmc), "Unable to get SOC PHY PAD ctrl regiser for %s\n",
+			np->name);
+		return PTR_ERR(params->pad_ctrl.reg);
+	}
+
+	ret = of_property_read_string(np, "marvell,pad-type", &name);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "Unable to determine SOC PHY PAD ctrl type\n");
+		return ret;
+	}
+	if (!strcmp(name, "sd")) {
+		params->pad_ctrl.pad_type = SOC_PAD_SD;
+	} else if (!strcmp(name, "fixed-1-8v")) {
+		params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+	} else {
+		dev_err(mmc_dev(host->mmc), "Unsupported SOC PHY PAD ctrl type %s\n",
+			name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
 static int emmc_phy_parse_param_dt(struct sdhci_host *host,
 				   struct device_node *np,
 				   struct emmc_phy_params *params)
@@ -663,7 +765,14 @@ static int emmc_phy_parse_param_dt(struct sdhci_host *host,
 	else
 		params->tun_step_divider = SDHCI_TUNING_STEP_DIVIDER;
 
-	return 0;
+	return get_dt_pad_ctrl_data(host, np, params);
+}
+
+/* Set SOC PHY Voltage PAD */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage)
+{
+	emmc_phy_set_soc_pad(host, signal_voltage);
 }
 
 /*
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 0347de533777..9b4fc4ac0216 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -322,6 +322,8 @@ static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
 	 */
 	enable_xenon_internal_clk(host);
 
+	xenon_soc_pad_ctrl(host, ios->signal_voltage);
+
 	if (priv->init_card_type == MMC_TYPE_MMC)
 		return xenon_emmc_signal_voltage_switch(mmc, ios);
 
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 86b5d2b1f1aa..a8312e36a03c 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -106,4 +106,6 @@ struct sdhci_xenon_priv {
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
 int xenon_phy_parse_dt(struct device_node *np,
 		       struct sdhci_host *host);
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage);
 #endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 09/12] mmc: sdhci-xenon: Add SOC PHY PAD voltage control
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

From: Hu Ziji <huziji@marvell.com>

Some SOCs have PHY PAD outside Xenon IP.
PHY PAD voltage should match signalling voltage in use.

Add generic SOC PHY PAD voltage control interface.
Implement Aramda-3700 SOC PHY PAD voltage control.

Signed-off-by: Hu Ziji <huziji@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/mmc/host/sdhci-xenon-phy.c | 111 +++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci-xenon.c     |   2 +-
 drivers/mmc/host/sdhci-xenon.h     |   2 +-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 453c5076761c..8b06bad34b26 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -148,6 +148,22 @@ enum phy_type_enum {
 	NR_PHY_TYPES
 };
 
+struct soc_pad_ctrl_table {
+	const char *soc;
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
+struct soc_pad_ctrl {
+	/* Register address of SOC PHY PAD ctrl */
+	void __iomem	*reg;
+	/* SOC PHY PAD ctrl type */
+	enum soc_pad_ctrl_type pad_type;
+	/* SOC specific operation to set SOC PHY PAD */
+	void (*set_soc_pad)(struct sdhci_host *host,
+			    unsigned char signal_voltage);
+};
+
 static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
 	.timing_adj	= SDHCI_EMMC_5_0_PHY_TIMING_ADJUST,
 	.func_ctrl	= SDHCI_EMMC_5_0_PHY_FUNC_CONTROL,
@@ -181,6 +197,8 @@ struct emmc_phy_params {
 	u8	nr_tun_times;
 	/* Divider for calculating Tuning Step */
 	u8	tun_step_divider;
+
+	struct soc_pad_ctrl pad_ctrl;
 };
 
 static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
@@ -257,6 +275,45 @@ static int emmc_phy_init(struct sdhci_host *host)
 	return 0;
 }
 
+#define ARMADA_3700_SOC_PAD_1_8V	0x1
+#define ARMADA_3700_SOC_PAD_3_3V	0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+					    unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+		writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+	} else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+		if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+			writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+		else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+			writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+	}
+}
+
+/*
+ * Set SOC PHY voltage PAD control register,
+ * according to the operation voltage on PAD.
+ * The detailed operation depends on SOC implementaion.
+ */
+static void emmc_phy_set_soc_pad(struct sdhci_host *host,
+				 unsigned char signal_voltage)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	struct emmc_phy_params *params = priv->phy_params;
+
+	if (!params->pad_ctrl.reg)
+		return;
+
+	if (params->pad_ctrl.set_soc_pad)
+		params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
 /*
  * Enable eMMC PHY HW DLL
  * DLL should be enabled and stable before HS200/SDR104 tuning,
@@ -630,6 +687,51 @@ static void emmc_phy_set(struct sdhci_host *host,
 	dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
 }
 
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+				struct device_node *np,
+				struct emmc_phy_params *params)
+{
+	int ret = 0;
+	const char *name;
+	struct resource iomem;
+
+	if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
+		params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+	else
+		return 0;
+
+	if (of_address_to_resource(np, 1, &iomem)) {
+		dev_err(mmc_dev(host->mmc), "Unable to find SOC PAD ctrl register address for %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+						     &iomem);
+	if (IS_ERR(params->pad_ctrl.reg)) {
+		dev_err(mmc_dev(host->mmc), "Unable to get SOC PHY PAD ctrl regiser for %s\n",
+			np->name);
+		return PTR_ERR(params->pad_ctrl.reg);
+	}
+
+	ret = of_property_read_string(np, "marvell,pad-type", &name);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "Unable to determine SOC PHY PAD ctrl type\n");
+		return ret;
+	}
+	if (!strcmp(name, "sd")) {
+		params->pad_ctrl.pad_type = SOC_PAD_SD;
+	} else if (!strcmp(name, "fixed-1-8v")) {
+		params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+	} else {
+		dev_err(mmc_dev(host->mmc), "Unsupported SOC PHY PAD ctrl type %s\n",
+			name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
 static int emmc_phy_parse_param_dt(struct sdhci_host *host,
 				   struct device_node *np,
 				   struct emmc_phy_params *params)
@@ -663,7 +765,14 @@ static int emmc_phy_parse_param_dt(struct sdhci_host *host,
 	else
 		params->tun_step_divider = SDHCI_TUNING_STEP_DIVIDER;
 
-	return 0;
+	return get_dt_pad_ctrl_data(host, np, params);
+}
+
+/* Set SOC PHY Voltage PAD */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage)
+{
+	emmc_phy_set_soc_pad(host, signal_voltage);
 }
 
 /*
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 0347de533777..9b4fc4ac0216 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -322,6 +322,8 @@ static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
 	 */
 	enable_xenon_internal_clk(host);
 
+	xenon_soc_pad_ctrl(host, ios->signal_voltage);
+
 	if (priv->init_card_type == MMC_TYPE_MMC)
 		return xenon_emmc_signal_voltage_switch(mmc, ios);
 
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 86b5d2b1f1aa..a8312e36a03c 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -106,4 +106,6 @@ struct sdhci_xenon_priv {
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
 int xenon_phy_parse_dt(struct device_node *np,
 		       struct sdhci_host *host);
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+			unsigned char signal_voltage);
 #endif
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

Add the eMMC support for Armada 37xx SoC and enable it in the Armada 3720
DB board.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 11 +++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6aaa4..707625031e29 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -72,6 +72,23 @@
 	status = "okay";
 };
 
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
 /* CON31 */
 &usb3 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index c4762538ec01..0c4cafe92e66 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -161,6 +161,17 @@
 				};
 			};
 
+			sdhci0: sdhci@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+				"marvell,sdhci-xenon";
+				reg = <0xd8000 0x300
+				       0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_perih_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sata: sata@e0000 {
 				compatible = "marvell,armada-3700-ahci";
 				reg = <0xe0000 0x2000>;
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

Add the eMMC support for Armada 37xx SoC and enable it in the Armada 3720
DB board.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 11 +++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6aaa4..707625031e29 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -72,6 +72,23 @@
 	status = "okay";
 };
 
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard at 0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
 /* CON31 */
 &usb3 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index c4762538ec01..0c4cafe92e66 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -161,6 +161,17 @@
 				};
 			};
 
+			sdhci0: sdhci at d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+				"marvell,sdhci-xenon";
+				reg = <0xd8000 0x300
+				       0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_perih_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sata: sata at e0000 {
 				compatible = "marvell,armada-3700-ahci";
 				reg = <0xe0000 0x2000>;
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

Also enable it on the Armada 7040 DB board

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts       | 14 +++++++++++++-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi        |  9 ++++++++-
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +++++++++-
 3 files changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 070b589680c5..6adbfcd26369 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -146,3 +146,17 @@
 &cpm_usb3_1 {
 	status = "okay";
 };
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cpm_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7b6136182ad0..181e8c5de3bf 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -229,6 +229,15 @@
 
 			};
 
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-7000-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cpm_syscon0 1 4>;
+				status = "disabled";
+			};
+
 			ap_syscon: system-controller@6f4000 {
 				compatible = "marvell,ap806-system-controller",
 					     "syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index e5e3ed678b6f..035b2b2fc9ca 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -164,6 +164,16 @@
 				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
+
+			cpm_sdhci0: sdhci@780000 {
+				compatible = "marvell,armada-7000-sdhci";
+				reg = <0x780000 0x300>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cpm_syscon0 1 4>;
+				status = "disabled";
+			};
+
 		};
 
 		cpm_pcie0: pcie@f2600000 {
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

Also enable it on the Armada 7040 DB board

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts       | 14 +++++++++++++-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi        |  9 ++++++++-
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +++++++++-
 3 files changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 070b589680c5..6adbfcd26369 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -146,3 +146,17 @@
 &cpm_usb3_1 {
 	status = "okay";
 };
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cpm_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7b6136182ad0..181e8c5de3bf 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -229,6 +229,15 @@
 
 			};
 
+			ap_sdhci0: sdhci at 6e0000 {
+				compatible = "marvell,armada-7000-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cpm_syscon0 1 4>;
+				status = "disabled";
+			};
+
 			ap_syscon: system-controller at 6f4000 {
 				compatible = "marvell,ap806-system-controller",
 					     "syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index e5e3ed678b6f..035b2b2fc9ca 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -164,6 +164,16 @@
 				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
+
+			cpm_sdhci0: sdhci at 780000 {
+				compatible = "marvell,armada-7000-sdhci";
+				reg = <0x780000 0x300>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cpm_syscon0 1 4>;
+				status = "disabled";
+			};
+
 		};
 
 		cpm_pcie0: pcie at f2600000 {
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 12/12] arm64: configs: enable SDHCI driver for Xenon
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-13 17:48   ` Gregory CLEMENT
  -1 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: Ulf Hansson, Adrian Hunter, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Gregory CLEMENT, Thomas Petazzoni, linux-arm-kernel, Ziji Hu,
	Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones,
	Victor Gu, Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak,
	Marcin Wojtas, Hanna Hawa, Kostya Porotchkin

This patch enables the driver for the SDHCI controller found on the
Marvell Armada 3700 and 7K/8K ARM64 SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0c1f1c..2d1f5ee62b18 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -353,6 +353,7 @@ CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_K3=y
 CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHCI_XENON=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 12/12] arm64: configs: enable SDHCI driver for Xenon
@ 2016-12-13 17:48   ` Gregory CLEMENT
  0 siblings, 0 replies; 48+ messages in thread
From: Gregory CLEMENT @ 2016-12-13 17:48 UTC (permalink / raw)
  To: linux-arm-kernel

This patch enables the driver for the SDHCI controller found on the
Marvell Armada 3700 and 7K/8K ARM64 SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0c1f1c..2d1f5ee62b18 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -353,6 +353,7 @@ CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_K3=y
 CONFIG_MMC_SUNXI=y
+CONFIG_MMC_SDHCI_XENON=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-- 
git-series 0.9.1

^ permalink raw reply related	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
       [not found] ` <CAPv3WKeE_2gMn12MXraoUmDEJhi307mGuc4BgDYpethKNsMqRQ@mail.gmail.com>
@ 2016-12-14 19:02     ` Marcin Wojtas
  0 siblings, 0 replies; 48+ messages in thread
From: Marcin Wojtas @ 2016-12-14 19:02 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Jason Cooper, Andrew Lunn,
	Sebastian Hesselbarth, Thomas Petazzoni, linux-arm-kernel,
	Ziji Hu, Jimmy Xu, Jisheng Zhang, Nadav Haklai, Ryan Gao,
	Doug Jones, Victor Gu, Wei(SOCP) Liu, Wilson Ding,
	Yehuda Yitschak, Hanna Hawa

Resend in plain text, sorry for noise.

2016-12-14 20:02 GMT+01:00 Marcin Wojtas <mw@semihalf.com>:
> Hi Gregory,
>
> Checked a3700 and a7k (both interfaces, CP - one after changing to use eMMC
> variant in DT). Everything works fine. You can add:
>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
>
> Best regards,
> Marcin
>
> 2016-12-13 18:48 GMT+01:00 Gregory CLEMENT
> <gregory.clement@free-electrons.com>:
>>
>> Hello,
>>
>> This the forth version of the series adding support for the SDHCI
>> Xenon controller. It can be currently found on the Armada 37xx and the
>> Armada 7K/8K but will be also used in more Marvell SoC (and not only
>> the mvebu ones actually).
>>
>> v3 -> v4:
>> For this version a few change have been done:
>> - fixes 2 bug  reported by kbuild-bot
>>   - remove extra of_node_put()
>>   - convert 0 in false for function returning boolean
>>
>> - add a device tree node for the sdhci controller present on the CP
>>   master for A7K/A8K. It also led to rename the sdhci0 node on AP to
>>   ap_sdhci0 to make a distinction with the one present on CP master.
>>
>> v2 -> v3
>> I think that now most (if not all) the remarks had been taking into
>> account since the second version. According to Ziji Hu, here are the
>> following changes:
>> " Changes in V3:
>>   Adjust and improve Xenon DT bindings. Move some caps setting from driver
>> into
>>   DT. Use mmc-card sub-node to represent eMMC type.
>>   Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
>>   Improve Xenon probe and ->init_card() functions.
>>   Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
>>   Split PHY patch into two smaller patches.
>>   Temporarily remove AXI clock before its implementation is improved."
>>
>> Besides this changes I also
>> - Removed the sdhci-xenon-phy.h and moved its content in the
>> shc-xenon-phy.c file.
>> - Fixed the tuning-count usage
>> - Managed the error case for clk_prepare_enable
>>
>> For the record the change from v1 was:
>> " Changes in V2:
>>   rebase on v4.9-rc2.
>>   Re-write Xenon bindings. Ajust Xenon DT property naming.
>>   Add a new DT property to indicate eMMC card type, instead of using
>>   variable card_candidate.
>>   Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
>>   Add support to HS400 retuning."
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (3):
>>   arm64: dts: marvell: add eMMC support for Armada 37xx
>>   arm64: dts: marvell: add sdhci support for Armada 7K/8K
>>   arm64: configs: enable SDHCI driver for Xenon
>>
>> Hu Ziji (9):
>>   mmc: sdhci: Export sdhci_set_ios() from sdhci.c
>>   mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
>>   mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
>>   mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
>>   MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
>>   dt: bindings: Add bindings for Marvell Xenon SD Host Controller
>>   mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
>>   mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
>>   mmc: sdhci-xenon: Add SOC PHY PAD voltage control
>>
>>  Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++-
>>  MAINTAINERS                                                   |   7 +-
>>  arch/arm64/boot/dts/marvell/armada-3720-db.dts                |  17 +-
>>  arch/arm64/boot/dts/marvell/armada-37xx.dtsi                  |  11 +-
>>  arch/arm64/boot/dts/marvell/armada-7040-db.dts                |  14 +-
>>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi                 |   9 +-
>>  arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi          |  10 +-
>>  arch/arm64/configs/defconfig                                  |   1 +-
>>  drivers/mmc/host/Kconfig                                      |   9 +-
>>  drivers/mmc/host/Makefile                                     |   3 +-
>>  drivers/mmc/host/sdhci-xenon-phy.c                            | 908
>> +++++++-
>>  drivers/mmc/host/sdhci-xenon.c                                | 615
>> +++++-
>>  drivers/mmc/host/sdhci-xenon.h                                | 111 +-
>>  drivers/mmc/host/sdhci.c                                      |  14 +-
>>  drivers/mmc/host/sdhci.h                                      |   5 +-
>>  15 files changed, 1926 insertions(+), 5 deletions(-)
>>  create mode 100644
>> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>>  create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
>>  create mode 100644 drivers/mmc/host/sdhci-xenon.c
>>  create mode 100644 drivers/mmc/host/sdhci-xenon.h
>>
>> base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942
>> --
>> git-series 0.9.1
>
>

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
@ 2016-12-14 19:02     ` Marcin Wojtas
  0 siblings, 0 replies; 48+ messages in thread
From: Marcin Wojtas @ 2016-12-14 19:02 UTC (permalink / raw)
  To: linux-arm-kernel

Resend in plain text, sorry for noise.

2016-12-14 20:02 GMT+01:00 Marcin Wojtas <mw@semihalf.com>:
> Hi Gregory,
>
> Checked a3700 and a7k (both interfaces, CP - one after changing to use eMMC
> variant in DT). Everything works fine. You can add:
>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
>
> Best regards,
> Marcin
>
> 2016-12-13 18:48 GMT+01:00 Gregory CLEMENT
> <gregory.clement@free-electrons.com>:
>>
>> Hello,
>>
>> This the forth version of the series adding support for the SDHCI
>> Xenon controller. It can be currently found on the Armada 37xx and the
>> Armada 7K/8K but will be also used in more Marvell SoC (and not only
>> the mvebu ones actually).
>>
>> v3 -> v4:
>> For this version a few change have been done:
>> - fixes 2 bug  reported by kbuild-bot
>>   - remove extra of_node_put()
>>   - convert 0 in false for function returning boolean
>>
>> - add a device tree node for the sdhci controller present on the CP
>>   master for A7K/A8K. It also led to rename the sdhci0 node on AP to
>>   ap_sdhci0 to make a distinction with the one present on CP master.
>>
>> v2 -> v3
>> I think that now most (if not all) the remarks had been taking into
>> account since the second version. According to Ziji Hu, here are the
>> following changes:
>> " Changes in V3:
>>   Adjust and improve Xenon DT bindings. Move some caps setting from driver
>> into
>>   DT. Use mmc-card sub-node to represent eMMC type.
>>   Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
>>   Improve Xenon probe and ->init_card() functions.
>>   Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
>>   Split PHY patch into two smaller patches.
>>   Temporarily remove AXI clock before its implementation is improved."
>>
>> Besides this changes I also
>> - Removed the sdhci-xenon-phy.h and moved its content in the
>> shc-xenon-phy.c file.
>> - Fixed the tuning-count usage
>> - Managed the error case for clk_prepare_enable
>>
>> For the record the change from v1 was:
>> " Changes in V2:
>>   rebase on v4.9-rc2.
>>   Re-write Xenon bindings. Ajust Xenon DT property naming.
>>   Add a new DT property to indicate eMMC card type, instead of using
>>   variable card_candidate.
>>   Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
>>   Add support to HS400 retuning."
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (3):
>>   arm64: dts: marvell: add eMMC support for Armada 37xx
>>   arm64: dts: marvell: add sdhci support for Armada 7K/8K
>>   arm64: configs: enable SDHCI driver for Xenon
>>
>> Hu Ziji (9):
>>   mmc: sdhci: Export sdhci_set_ios() from sdhci.c
>>   mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
>>   mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
>>   mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
>>   MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
>>   dt: bindings: Add bindings for Marvell Xenon SD Host Controller
>>   mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
>>   mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
>>   mmc: sdhci-xenon: Add SOC PHY PAD voltage control
>>
>>  Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++-
>>  MAINTAINERS                                                   |   7 +-
>>  arch/arm64/boot/dts/marvell/armada-3720-db.dts                |  17 +-
>>  arch/arm64/boot/dts/marvell/armada-37xx.dtsi                  |  11 +-
>>  arch/arm64/boot/dts/marvell/armada-7040-db.dts                |  14 +-
>>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi                 |   9 +-
>>  arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi          |  10 +-
>>  arch/arm64/configs/defconfig                                  |   1 +-
>>  drivers/mmc/host/Kconfig                                      |   9 +-
>>  drivers/mmc/host/Makefile                                     |   3 +-
>>  drivers/mmc/host/sdhci-xenon-phy.c                            | 908
>> +++++++-
>>  drivers/mmc/host/sdhci-xenon.c                                | 615
>> +++++-
>>  drivers/mmc/host/sdhci-xenon.h                                | 111 +-
>>  drivers/mmc/host/sdhci.c                                      |  14 +-
>>  drivers/mmc/host/sdhci.h                                      |   5 +-
>>  15 files changed, 1926 insertions(+), 5 deletions(-)
>>  create mode 100644
>> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>>  create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
>>  create mode 100644 drivers/mmc/host/sdhci-xenon.c
>>  create mode 100644 drivers/mmc/host/sdhci-xenon.h
>>
>> base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942
>> --
>> git-series 0.9.1
>
>

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
  2016-12-13 17:48   ` Gregory CLEMENT
@ 2016-12-22 10:45     ` Russell King - ARM Linux
  -1 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 10:45 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Thomas Petazzoni, Andrew Lunn, Ulf Hansson, Wei(SOCP) Liu,
	Jason Cooper, Hanna Hawa, linux-mmc, Adrian Hunter, Nadav Haklai,
	Ziji Hu, Jimmy Xu, Victor Gu, Ryan Gao, Sebastian Hesselbarth,
	Doug Jones, Jisheng Zhang, Kostya Porotchkin, Marcin Wojtas,
	Wilson Ding, linux-arm-kernel, Yehuda Yitschak

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci@6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;

This seems to be the wrong clock - how can the AP SDHCI core be connected
to the CPM syscon (which is on a different die.)

I think you first need a patch to add this clock to the AP syscon...

Thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
@ 2016-12-22 10:45     ` Russell King - ARM Linux
  0 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 10:45 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci at 6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;

This seems to be the wrong clock - how can the AP SDHCI core be connected
to the CPM syscon (which is on a different die.)

I think you first need a patch to add this clock to the AP syscon...

Thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
  2016-12-13 17:48   ` Gregory CLEMENT
@ 2016-12-22 10:47     ` Russell King - ARM Linux
  -1 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 10:47 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Thomas Petazzoni,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Ziji Hu, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci@780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

Oh, and a nitpick, since I've already commented on this patch - there's
a needless extra blank line here...

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
@ 2016-12-22 10:47     ` Russell King - ARM Linux
  0 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 10:47 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci at 780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

Oh, and a nitpick, since I've already commented on this patch - there's
a needless extra blank line here...

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
  2016-12-22 10:45     ` Russell King - ARM Linux
@ 2016-12-22 10:47       ` Thomas Petazzoni
  -1 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2016-12-22 10:47 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Gregory CLEMENT, Ulf Hansson, Adrian Hunter, linux-mmc,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Ziji Hu, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

Hello,

On Thu, 22 Dec 2016 10:45:02 +0000, Russell King - ARM Linux wrote:
> On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > index 7b6136182ad0..181e8c5de3bf 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > @@ -229,6 +229,15 @@
> >  
> >  			};
> >  
> > +			ap_sdhci0: sdhci@6e0000 {
> > +				compatible = "marvell,armada-7000-sdhci";
> > +				reg = <0x6e0000 0x300>;
> > +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> > +				clock-names = "core";
> > +				clocks = <&cpm_syscon0 1 4>;  
> 
> This seems to be the wrong clock - how can the AP SDHCI core be connected
> to the CPM syscon (which is on a different die.)

Agreed. This cannot be the right clock.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
@ 2016-12-22 10:47       ` Thomas Petazzoni
  0 siblings, 0 replies; 48+ messages in thread
From: Thomas Petazzoni @ 2016-12-22 10:47 UTC (permalink / raw)
  To: linux-arm-kernel

Hello,

On Thu, 22 Dec 2016 10:45:02 +0000, Russell King - ARM Linux wrote:
> On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > index 7b6136182ad0..181e8c5de3bf 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> > @@ -229,6 +229,15 @@
> >  
> >  			};
> >  
> > +			ap_sdhci0: sdhci at 6e0000 {
> > +				compatible = "marvell,armada-7000-sdhci";
> > +				reg = <0x6e0000 0x300>;
> > +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> > +				clock-names = "core";
> > +				clocks = <&cpm_syscon0 1 4>;  
> 
> This seems to be the wrong clock - how can the AP SDHCI core be connected
> to the CPM syscon (which is on a different die.)

Agreed. This cannot be the right clock.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
  2016-12-13 17:48   ` Gregory CLEMENT
@ 2016-12-22 11:18     ` Russell King - ARM Linux
  -1 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:18 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Thomas Petazzoni,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Ziji Hu, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote:
> +Optional Properties:
> +- mmc-card:
> +  mmc-card child node must be provided when current SDHC is for eMMC.
> +  Xenon SDHC often can support both SD and eMMC. This child node indicates that
> +  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
> +  operations can be enabled prior to eMMC init sequence.
> +  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
> +  This child node should not be set if current Xenon SDHC is for SD/SDIO.

This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"?
Your examples below use "mmccard" as does the documentation you point
towards.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
@ 2016-12-22 11:18     ` Russell King - ARM Linux
  0 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:18 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote:
> +Optional Properties:
> +- mmc-card:
> +  mmc-card child node must be provided when current SDHC is for eMMC.
> +  Xenon SDHC often can support both SD and eMMC. This child node indicates that
> +  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
> +  operations can be enabled prior to eMMC init sequence.
> +  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
> +  This child node should not be set if current Xenon SDHC is for SD/SDIO.

This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"?
Your examples below use "mmccard" as does the documentation you point
towards.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
  2016-12-13 17:48   ` Gregory CLEMENT
@ 2016-12-22 11:21     ` Russell King - ARM Linux
  -1 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:21 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Thomas Petazzoni,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Ziji Hu, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci@6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +
>  			ap_syscon: system-controller@6f4000 {
>  				compatible = "marvell,ap806-system-controller",
>  					     "syscon";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci@780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

One other point - aren't the SDHCI interfaces dma-coherent on the AP806
and CP110?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
@ 2016-12-22 11:21     ` Russell King - ARM Linux
  0 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:21 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci at 6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +
>  			ap_syscon: system-controller at 6f4000 {
>  				compatible = "marvell,ap806-system-controller",
>  					     "syscon";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci at 780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

One other point - aren't the SDHCI interfaces dma-coherent on the AP806
and CP110?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
  2016-12-13 17:48 ` Gregory CLEMENT
@ 2016-12-22 11:25   ` Russell King - ARM Linux
  -1 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:25 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Thomas Petazzoni,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Ziji Hu, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

On Tue, Dec 13, 2016 at 06:48:29PM +0100, Gregory CLEMENT wrote:
> This the forth version of the series adding support for the SDHCI
> Xenon controller. It can be currently found on the Armada 37xx and the
> Armada 7K/8K but will be also used in more Marvell SoC (and not only
> the mvebu ones actually).

With the problems and niggles fixed, it seems to work here on my 8040
board (along with dma-coherent):

sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 8GND3R 7.28 GiB
mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
mmcblk0boot0: mmc0:0001 8GND3R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 8GND3R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GND3R partition 3 512 KiB
mmc1: new high speed SDHC card at address 0001
mmcblk1: mmc1:0001 00000 14.6 GiB
 mmcblk1: p1 p2 p3

Thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
@ 2016-12-22 11:25   ` Russell King - ARM Linux
  0 siblings, 0 replies; 48+ messages in thread
From: Russell King - ARM Linux @ 2016-12-22 11:25 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Dec 13, 2016 at 06:48:29PM +0100, Gregory CLEMENT wrote:
> This the forth version of the series adding support for the SDHCI
> Xenon controller. It can be currently found on the Armada 37xx and the
> Armada 7K/8K but will be also used in more Marvell SoC (and not only
> the mvebu ones actually).

With the problems and niggles fixed, it seems to work here on my 8040
board (along with dma-coherent):

sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 8GND3R 7.28 GiB
mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
mmcblk0boot0: mmc0:0001 8GND3R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 8GND3R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GND3R partition 3 512 KiB
mmc1: new high speed SDHC card at address 0001
mmcblk1: mmc1:0001 00000 14.6 GiB
 mmcblk1: p1 p2 p3

Thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
  2016-12-22 11:18     ` Russell King - ARM Linux
@ 2016-12-22 12:47       ` Ziji Hu
  -1 siblings, 0 replies; 48+ messages in thread
From: Ziji Hu @ 2016-12-22 12:47 UTC (permalink / raw)
  To: Russell King - ARM Linux, Gregory CLEMENT
  Cc: Ulf Hansson, Adrian Hunter, linux-mmc, Thomas Petazzoni,
	Andrew Lunn, Yehuda Yitschak, Marcin Wojtas, Jason Cooper,
	Hanna Hawa, Kostya Porotchkin, Nadav Haklai, Jimmy Xu,
	Doug Jones, Ryan Gao, Jisheng Zhang, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, linux-arm-kernel, Sebastian Hesselbarth

Hi Russell,

On 2016/12/22 19:18, Russell King - ARM Linux wrote:
> On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote:
>> +Optional Properties:
>> +- mmc-card:
>> +  mmc-card child node must be provided when current SDHC is for eMMC.
>> +  Xenon SDHC often can support both SD and eMMC. This child node indicates that
>> +  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
>> +  operations can be enabled prior to eMMC init sequence.
>> +  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
>> +  This child node should not be set if current Xenon SDHC is for SD/SDIO.
> 
> This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"?
> Your examples below use "mmccard" as does the documentation you point
> towards.
>

    Thanks a lot for the review.

    I might mix up it with compatible "mmc-card".
    I will change it to sub-node name in next version soon.

    Thank you.

Best regards,
Hu Ziji

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller
@ 2016-12-22 12:47       ` Ziji Hu
  0 siblings, 0 replies; 48+ messages in thread
From: Ziji Hu @ 2016-12-22 12:47 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Russell,

On 2016/12/22 19:18, Russell King - ARM Linux wrote:
> On Tue, Dec 13, 2016 at 06:48:35PM +0100, Gregory CLEMENT wrote:
>> +Optional Properties:
>> +- mmc-card:
>> +  mmc-card child node must be provided when current SDHC is for eMMC.
>> +  Xenon SDHC often can support both SD and eMMC. This child node indicates that
>> +  current SDHC is for eMMC card. Thus Xenon eMMC specific configuration and
>> +  operations can be enabled prior to eMMC init sequence.
>> +  Please refer to Documentation/devicetree/bindings/mmc/mmc-card.txt.
>> +  This child node should not be set if current Xenon SDHC is for SD/SDIO.
> 
> This looks like a typo - shouldn't it be "mmccard" and not "mmc-card"?
> Your examples below use "mmccard" as does the documentation you point
> towards.
>

    Thanks a lot for the review.

    I might mix up it with compatible "mmc-card".
    I will change it to sub-node name in next version soon.

    Thank you.

Best regards,
Hu Ziji

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  2016-12-13 17:48   ` Gregory CLEMENT
@ 2017-01-04  7:26     ` Adrian Hunter
  -1 siblings, 0 replies; 48+ messages in thread
From: Adrian Hunter @ 2017-01-04  7:26 UTC (permalink / raw)
  To: Gregory CLEMENT, Ulf Hansson, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Thomas Petazzoni, linux-arm-kernel, Ziji Hu, Jimmy Xu,
	Jisheng Zhang, Nadav Haklai, Ryan Gao, Doug Jones, Victor Gu,
	Wei(SOCP) Liu, Wilson Ding, Yehuda Yitschak, Marcin Wojtas,
	Hanna Hawa, Kostya Porotchkin

[-- Attachment #1: Type: text/plain, Size: 24362 bytes --]

On 13/12/16 19:48, Gregory CLEMENT wrote:
> From: Hu Ziji <huziji@marvell.com>
> 
> Add Xenon eMMC/SD/SDIO host controller core functionality.
> Add Xenon specific intialization process.
> Add Xenon specific mmc_host_ops APIs.
> Add Xenon specific register definitions.
> 
> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
> 
> Marvell Xenon SDHC conforms to SD Physical Layer Specification
> Version 3.01 and is designed according to the guidelines provided
> in the SD Host Controller Standard Specification Version 3.00.
> 
> Signed-off-by: Hu Ziji <huziji@marvell.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
>  MAINTAINERS                    |   1 +-
>  drivers/mmc/host/Kconfig       |   9 +-
>  drivers/mmc/host/Makefile      |   3 +-
>  drivers/mmc/host/sdhci-xenon.c | 612 ++++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci-xenon.h |  70 ++++-
>  5 files changed, 695 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-xenon.c
>  create mode 100644 drivers/mmc/host/sdhci-xenon.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 850a0afb0c8d..bb33286aeb48 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
>  M:	Ziji Hu <huziji@marvell.com>
>  L:	linux-mmc@vger.kernel.org
>  S:	Supported
> +F:	drivers/mmc/host/sdhci-xenon*
>  F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>  
>  MATROX FRAMEBUFFER DRIVER
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 5274f503a39a..85a53623526a 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -798,3 +798,12 @@ config MMC_SDHCI_BRCMSTB
>  	  Broadcom STB SoCs.
>  
>  	  If unsure, say Y.
> +
> +config MMC_SDHCI_XENON
> +	tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
> +	depends on MMC_SDHCI && MMC_SDHCI_PLTFM
> +	help
> +	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
> +	  If you have a machine with integrated Marvell Xenon SDHC IP,
> +	  say Y or M here.
> +	  If unsure, say N.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index e2bdaaf43184..75eaf743486c 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -80,3 +80,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB)		+= sdhci-brcmstb.o
>  ifeq ($(CONFIG_CB710_DEBUG),y)
>  	CFLAGS-cb710-mmc	+= -DDEBUG
>  endif
> +
> +obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
> +sdhci-xenon-driver-y		+= sdhci-xenon.o
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> new file mode 100644
> index 000000000000..c71439fbc308
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -0,0 +1,612 @@
> +/*
> + * Driver for Marvell Xenon SDHC as a platform device
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author:	Hu Ziji <huziji@marvell.com>
> + * Date:	2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * Inspired by Jisheng Zhang <jszhang@marvell.com>
> + * Special thanks to Video BG4 project team.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include "sdhci-pltfm.h"
> +#include "sdhci-xenon.h"
> +
> +static int enable_xenon_internal_clk(struct sdhci_host *host)
> +{
> +	u32 reg;
> +	u8 timeout;
> +
> +	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> +	reg |= SDHCI_CLOCK_INT_EN;
> +	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +	/* Wait max 20 ms */
> +	timeout = 20;
> +	while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> +			& SDHCI_CLOCK_INT_STABLE)) {
> +		if (timeout == 0) {
> +			pr_err("%s: Internal clock never stabilised.\n",
> +			       mmc_hostname(host->mmc));
> +			return -ETIMEDOUT;
> +		}
> +		timeout--;
> +		mdelay(1);
> +	}
> +
> +	return 0;
> +}
> +
> +/* Set SDCLK-off-while-idle */
> +static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
> +				     unsigned char sdhc_id, bool enable)
> +{
> +	u32 reg;
> +	u32 mask;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	/* Get the bit shift basing on the SDHC index */
> +	mask = (0x1 << (SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
> +	if (enable)
> +		reg |= mask;
> +	else
> +		reg &= ~mask;
> +
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable/Disable the Auto Clock Gating function */
> +static void xenon_set_acg(struct sdhci_host *host, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	if (enable)
> +		reg &= ~SDHCI_AUTO_CLKGATE_DISABLE_MASK;
> +	else
> +		reg |= SDHCI_AUTO_CLKGATE_DISABLE_MASK;
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable this SDHC */
> +static void xenon_enable_sdhc(struct sdhci_host *host,
> +			      unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	reg |= (BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +
> +	/*
> +	 * Manually set the flag which all the card types require,
> +	 * including SD, eMMC, SDIO
> +	 */
> +	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
> +}
> +
> +/* Disable this SDHC */
> +static void xenon_disable_sdhc(struct sdhci_host *host,
> +			       unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	reg &= ~(BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable Parallel Transfer Mode */
> +static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
> +					    unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
> +	reg |= BIT(sdhc_id);
> +	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
> +}
> +
> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u32 reg;
> +
> +	/* Disable the Re-Tuning Request functionality */
> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
> +
> +	/* Disable the Re-tuning Event Signal Enable */
> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
> +	reg &= ~SDHCI_INT_RETUNE;
> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
> +
> +	/* Force to use Tuning Mode 1 */
> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
> +	/* Set re-tuning period */
> +	host->tuning_count = 1 << (priv->tuning_count - 1);

host->tuning_mode and host->tuning_count get overwritten in
sdhci_setup_host() called by sdhci_add_host()

> +}
> +
> +/*
> + * Operations inside struct sdhci_ops
> + */
> +/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
> +static void sdhci_xenon_reset_exit(struct sdhci_host *host,
> +				   unsigned char sdhc_id, u8 mask)
> +{
> +	/* Only SOFTWARE RESET ALL will clear the register setting */
> +	if (!(mask & SDHCI_RESET_ALL))
> +		return;
> +
> +	/* Disable tuning request and auto-retuning again */
> +	xenon_sdhc_tuning_setup(host);
> +
> +	xenon_set_acg(host, true);
> +
> +	xenon_set_sdclk_off_idle(host, sdhc_id, false);
> +}
> +
> +static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	sdhci_reset(host, mask);
> +	sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
> +}
> +
> +/*
> + * Xenon defines different values for HS200 and HS400
> + * in Host_Control_2
> + */
> +static void xenon_set_uhs_signaling(struct sdhci_host *host,
> +				    unsigned int timing)
> +{
> +	u16 ctrl_2;
> +
> +	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +	/* Select Bus Speed Mode for host */
> +	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
> +	if (timing == MMC_TIMING_MMC_HS200)
> +		ctrl_2 |= SDHCI_XENON_CTRL_HS200;
> +	else if (timing == MMC_TIMING_UHS_SDR104)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
> +	else if (timing == MMC_TIMING_UHS_SDR12)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
> +	else if (timing == MMC_TIMING_UHS_SDR25)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
> +	else if (timing == MMC_TIMING_UHS_SDR50)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
> +	else if ((timing == MMC_TIMING_UHS_DDR50) ||
> +		 (timing == MMC_TIMING_MMC_DDR52))
> +		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
> +	else if (timing == MMC_TIMING_MMC_HS400)
> +		ctrl_2 |= SDHCI_XENON_CTRL_HS400;
> +	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +}
> +
> +static const struct sdhci_ops sdhci_xenon_ops = {
> +	.set_clock		= sdhci_set_clock,
> +	.set_bus_width		= sdhci_set_bus_width,
> +	.reset			= sdhci_xenon_reset,
> +	.set_uhs_signaling	= xenon_set_uhs_signaling,
> +	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
> +	.ops = &sdhci_xenon_ops,
> +	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
> +		  SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
> +		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> +};
> +
> +/*
> + * Xenon Specific Operations in mmc_host_ops
> + */
> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	/*
> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
> +	 * Disable Preset Value register for HS400/HS200.
> +	 * eMMC HS with preset_enabled set will trigger a bug in
> +	 * get_preset_value().
> +	 */
> +	spin_lock_irqsave(&host->lock, flags);
> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
> +		host->preset_enabled = false;
> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> +
> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
> +	} else {
> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> +	}
> +	spin_unlock_irqrestore(&host->lock, flags);

At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
and add a callback instead.

> +
> +	sdhci_set_ios(mmc, ios);
> +
> +	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
> +		spin_lock_irqsave(&host->lock, flags);
> +		xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
> +		spin_unlock_irqrestore(&host->lock, flags);
> +	}
> +}
> +
> +static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
> +					    struct mmc_ios *ios)
> +{
> +	unsigned char voltage = ios->signal_voltage;
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	unsigned char voltage_code;
> +	u32 ctrl;
> +
> +	if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
> +	    (voltage == MMC_SIGNAL_VOLTAGE_180)) {
> +		if (voltage == MMC_SIGNAL_VOLTAGE_330)
> +			voltage_code = SDHCI_EMMC_VCCQ_3_3V;
> +		else if (voltage == MMC_SIGNAL_VOLTAGE_180)
> +			voltage_code = SDHCI_EMMC_VCCQ_1_8V;
> +
> +		/*
> +		 * This host is for eMMC, XENON self-defined
> +		 * eMMC control register should be accessed
> +		 * instead of Host Control 2
> +		 */
> +		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
> +		ctrl &= ~SDHCI_EMMC_VCCQ_MASK;
> +		ctrl |= voltage_code;
> +		sdhci_writel(host, ctrl, SDHCI_SLOT_EMMC_CTRL);
> +
> +		/* There is no standard to determine this waiting period */
> +		usleep_range(1000, 2000);
> +
> +		/* Check whether io voltage switch is done */
> +		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
> +		ctrl &= SDHCI_EMMC_VCCQ_MASK;
> +		/*
> +		 * This bit is set only when regulator feeds back
> +		 * the voltage switch results to Xenon SDHC.
> +		 * However, in actaul implementation, regulator might not
> +		 * provide this feedback.
> +		 * Thus we shall not rely on this bit to determine
> +		 * if switch failed.
> +		 * If the bit is not set, just throw a message.
> +		 * Besides, error code should not be returned.
> +		 */
> +		if (ctrl != voltage_code)
> +			dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
> +		return 0;
> +	}
> +
> +	dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
> +	return -EINVAL;
> +}
> +
> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
> +					     struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	/*
> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
> +	 * disabled. However, sdhci_set_clock will also disable the Internal
> +	 * clock in mmc_set_signal_voltage().
> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
> +	 * Thus here manually enable internal clock.
> +	 *
> +	 * After switch completes, it is unnecessary to disable internal clock,
> +	 * since keeping internal clock active obeys SD spec.
> +	 */
> +	enable_xenon_internal_clk(host);

We could try the attached patch.

> +
> +	if (priv->init_card_type == MMC_TYPE_MMC)
> +		return xenon_emmc_signal_voltage_switch(mmc, ios);
> +
> +	return sdhci_start_signal_voltage_switch(mmc, ios);
> +}
> +
> +/*
> + * Update card type.
> + * priv->init_card_type will be used in PHY timing adjustment.
> + */
> +static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	/* Update card type*/
> +	priv->init_card_type = card->type;
> +}
> +
> +static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +
> +	if (host->timing == MMC_TIMING_UHS_DDR50)
> +		return 0;
> +
> +	return sdhci_execute_tuning(mmc, opcode);
> +}
> +
> +static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u32 reg;
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	sdhci_enable_sdio_irq(mmc, enable);
> +
> +	if (enable) {
> +		/*
> +		 * Set SDIO Card Inserted indication
> +		 * to enable detecting SDIO async irq.
> +		 */
> +		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		reg |= (1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
> +		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
> +	} else {
> +		/* Clear SDIO Card Inserted indication */
> +		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		reg &= ~(1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
> +		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
> +	}
> +}
> +
> +static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
> +{
> +	host->mmc_host_ops.set_ios = xenon_set_ios;
> +	host->mmc_host_ops.start_signal_voltage_switch =
> +			xenon_start_signal_voltage_switch;
> +	host->mmc_host_ops.init_card = xenon_init_card;
> +	host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
> +	host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
> +}
> +
> +/*
> + * Parse child node in Xenon DT.
> + * Search for the following item(s):
> + * - eMMC card type
> + */
> +static int xenon_child_node_of_parse(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct mmc_host *mmc = host->mmc;
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	struct device_node *child;
> +	int nr_child;
> +
> +	priv->init_card_type = SDHCI_CARD_TYPE_UNKNOWN;
> +
> +	nr_child = of_get_child_count(np);
> +	if (!nr_child)
> +		return 0;
> +
> +	for_each_child_of_node(np, child) {
> +		if (of_device_is_compatible(child, "mmc-card"))	{
> +			priv->init_card_type = MMC_TYPE_MMC;
> +			mmc->caps |= MMC_CAP_NONREMOVABLE;
> +
> +			/*
> +			 * Force to clear BUS_TEST to
> +			 * skip bus_test_pre and bus_test_post
> +			 */
> +			mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
> +			mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
> +				      MMC_CAP2_PACKED_CMD |
> +				      MMC_CAP2_NO_SD |
> +				      MMC_CAP2_NO_SDIO;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int xenon_probe_dt(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct mmc_host *mmc = host->mmc;
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	int err;
> +	u32 sdhc_id, nr_sdhc;
> +	u32 tuning_count;
> +
> +	/* Standard MMC property */
> +	err = mmc_of_parse(mmc);
> +	if (err)
> +		return err;
> +
> +	/* Standard SDHCI property */
> +	sdhci_get_of_property(pdev);
> +
> +	/*
> +	 * Xenon Specific property:
> +	 * init_card_type: check whether this SDHC is for eMMC
> +	 * sdhc-id: the index of current SDHC.
> +	 *	    Refer to SDHCI_SYS_CFG_INFO register
> +	 * tun-count: the interval between re-tuning
> +	 */
> +	/* Parse child node, including checking emmc type */
> +	err = xenon_child_node_of_parse(pdev);
> +	if (err)
> +		return err;
> +
> +	priv->sdhc_id = 0x0;
> +	if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
> +		nr_sdhc = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		nr_sdhc &= SDHCI_NR_SUPPORTED_SLOT_MASK;
> +		if (unlikely(sdhc_id > nr_sdhc)) {
> +			dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
> +				sdhc_id, nr_sdhc);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	tuning_count = SDHCI_DEF_TUNING_COUNT;
> +	if (!of_property_read_u32(np, "marvell,xenon-tun-count",
> +				  &tuning_count)) {
> +		if (unlikely(tuning_count >= SDHCI_TMR_RETUN_NO_PRESENT)) {
> +			dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
> +				SDHCI_DEF_TUNING_COUNT);
> +			tuning_count = SDHCI_DEF_TUNING_COUNT;
> +		}
> +	}
> +	priv->tuning_count = tuning_count;
> +
> +	return err;
> +}
> +
> +static int xenon_sdhc_probe(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	/* Enable SDHC */
> +	xenon_enable_sdhc(host, sdhc_id);
> +
> +	/* Enable ACG */
> +	xenon_set_acg(host, true);
> +
> +	/* Enable Parallel Transfer Mode */
> +	xenon_enable_sdhc_parallel_tran(host, sdhc_id);
> +
> +	/* Set tuning functionality of this SDHC */
> +	xenon_sdhc_tuning_setup(host);
> +
> +	return 0;
> +}
> +
> +static void xenon_sdhc_remove(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	/* disable SDHC */
> +	xenon_disable_sdhc(host, sdhc_id);
> +}
> +
> +static int sdhci_xenon_probe(struct platform_device *pdev)
> +{
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_host *host;
> +	struct sdhci_xenon_priv *priv;
> +	int err;
> +
> +	host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
> +				sizeof(struct sdhci_xenon_priv));
> +	if (IS_ERR(host))
> +		return PTR_ERR(host);
> +
> +	pltfm_host = sdhci_priv(host);
> +	priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	xenon_set_acg(host, false);
> +
> +	/*
> +	 * Link Xenon specific mmc_host_ops function,
> +	 * to replace standard ones in sdhci_ops.
> +	 */
> +	xenon_replace_mmc_host_ops(host);
> +
> +	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> +	if (IS_ERR(pltfm_host->clk)) {
> +		err = PTR_ERR(pltfm_host->clk);
> +		dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
> +		goto free_pltfm;
> +	}
> +	err = clk_prepare_enable(pltfm_host->clk);
> +	if (err)
> +		goto free_pltfm;
> +
> +	err = xenon_probe_dt(pdev);
> +	if (err)
> +		goto err_clk;
> +
> +	err = xenon_sdhc_probe(host);
> +	if (err)
> +		goto err_clk;
> +
> +	err = sdhci_add_host(host);
> +	if (err)
> +		goto remove_sdhc;
> +
> +	return 0;
> +
> +remove_sdhc:
> +	xenon_sdhc_remove(host);
> +err_clk:
> +	clk_disable_unprepare(pltfm_host->clk);
> +free_pltfm:
> +	sdhci_pltfm_free(pdev);
> +	return err;
> +}
> +
> +static int sdhci_xenon_remove(struct platform_device *pdev)
> +{
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);

This 'dead' check was originally for PCI I think.  Unless you know it makes
sense for your device, I would leave it out. i.e. just do
sdhci_remove_host(host, 0);

> +
> +	xenon_sdhc_remove(host);
> +
> +	sdhci_remove_host(host, dead);
> +
> +	clk_disable_unprepare(pltfm_host->clk);
> +
> +	sdhci_pltfm_free(pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
> +	{ .compatible = "marvell,armada-7000-sdhci",},
> +	{ .compatible = "marvell,armada-3700-sdhci",},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
> +
> +static struct platform_driver sdhci_xenon_driver = {
> +	.driver	= {
> +		.name	= "xenon-sdhci",
> +		.of_match_table = sdhci_xenon_dt_ids,
> +		.pm = &sdhci_pltfm_pmops,
> +	},
> +	.probe	= sdhci_xenon_probe,
> +	.remove	= sdhci_xenon_remove,
> +};
> +
> +module_platform_driver(sdhci_xenon_driver);
> +
> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> new file mode 100644
> index 000000000000..d50cd663a265
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author:	Hu Ziji <huziji@marvell.com>
> + * Date:	2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +#ifndef SDHCI_XENON_H_
> +#define SDHCI_XENON_H_
> +
> +

Double blank line

> +/* Register Offset of Xenon SDHC self-defined register */
> +#define SDHCI_SYS_CFG_INFO			0x0104

A lot of these defines look like they could be just in sdhci-xenon.c or
sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
"SDHCI" because they are not standard.  "XENON" would be better.

> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
> +
> +#define SDHCI_SYS_OP_CTRL			0x0108
> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
> +#define SDHCI_SLOT_ENABLE_SHIFT			0
> +
> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
> +
> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
> +#define SDHCI_EMMC_VCCQ_MASK			0x3
> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
> +
> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
> +/* retuning compatible */
> +#define SDHCI_RETUNING_COMPATIBLE		0x1
> +
> +/* Tuning Parameter */
> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
> +#define SDHCI_DEF_TUNING_COUNT			0x9
> +
> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)

Unnecessary ()

> +
> +/* Xenon specific Mode Select value */
> +#define SDHCI_XENON_CTRL_HS200			0x5
> +#define SDHCI_XENON_CTRL_HS400			0x6
> +
> +/* Indicate Card Type is not clear yet */
> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
> +
> +struct sdhci_xenon_priv {
> +	unsigned char	tuning_count;
> +	/* idx of SDHC */
> +	u8		sdhc_id;
> +
> +	/*
> +	 * eMMC/SD/SDIO require different PHY settings or
> +	 * voltage control. It's necessary for Xenon driver to
> +	 * recognize card type during, or even before initialization.
> +	 * However, mmc_host->card is not available yet at that time.
> +	 * This field records the card type during init.
> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
> +	 * updated in xenon_init_card().
> +	 *
> +	 * It is only valid during initialization after it is updated.
> +	 * Do not access this variable in normal transfers after
> +	 * initialization completes.
> +	 */
> +	unsigned int	init_card_type;
> +};
> +
> +#endif
> 


[-- Attachment #2: 0001-mmc-sdhci-Leave-internal-clock-on-when-bus-power-is-.patch --]
[-- Type: text/x-patch, Size: 1423 bytes --]

>From 9a23bf1292e33d3d91a1ee2d7f269c9079d9c1be Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@intel.com>
Date: Fri, 25 Nov 2016 16:25:05 +0200
Subject: [PATCH] mmc: sdhci: Leave internal clock on when bus power is on

According to the SDHCI specification, "Internal Clock Enable" is expected
to remain on while "SD Clock Enable" is off during voltage switching. Do
that by keeping the internal clock on if the bus power is on.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9a4fda81ff81..aeb001e7cc63 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1372,14 +1372,20 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 
 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-	u16 clk;
+	u16 clk = 0;
 
 	host->mmc->actual_clock = 0;
 
-	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-
-	if (clock == 0)
+	if (clock == 0) {
+		if (host->mmc->ios.power_mode != MMC_POWER_OFF) {
+			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+			clk &= ~SDHCI_CLOCK_CARD_EN;
+		}
+		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 		return;
+	}
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
 	sdhci_enable_clk(host, clk);
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 48+ messages in thread
* [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
@ 2017-01-04  7:26     ` Adrian Hunter
  0 siblings, 0 replies; 48+ messages in thread
From: Adrian Hunter @ 2017-01-04  7:26 UTC (permalink / raw)
  To: linux-arm-kernel

On 13/12/16 19:48, Gregory CLEMENT wrote:
> From: Hu Ziji <huziji@marvell.com>
> 
> Add Xenon eMMC/SD/SDIO host controller core functionality.
> Add Xenon specific intialization process.
> Add Xenon specific mmc_host_ops APIs.
> Add Xenon specific register definitions.
> 
> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
> 
> Marvell Xenon SDHC conforms to SD Physical Layer Specification
> Version 3.01 and is designed according to the guidelines provided
> in the SD Host Controller Standard Specification Version 3.00.
> 
> Signed-off-by: Hu Ziji <huziji@marvell.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
>  MAINTAINERS                    |   1 +-
>  drivers/mmc/host/Kconfig       |   9 +-
>  drivers/mmc/host/Makefile      |   3 +-
>  drivers/mmc/host/sdhci-xenon.c | 612 ++++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci-xenon.h |  70 ++++-
>  5 files changed, 695 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-xenon.c
>  create mode 100644 drivers/mmc/host/sdhci-xenon.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 850a0afb0c8d..bb33286aeb48 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7608,6 +7608,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
>  M:	Ziji Hu <huziji@marvell.com>
>  L:	linux-mmc at vger.kernel.org
>  S:	Supported
> +F:	drivers/mmc/host/sdhci-xenon*
>  F:	Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>  
>  MATROX FRAMEBUFFER DRIVER
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 5274f503a39a..85a53623526a 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -798,3 +798,12 @@ config MMC_SDHCI_BRCMSTB
>  	  Broadcom STB SoCs.
>  
>  	  If unsure, say Y.
> +
> +config MMC_SDHCI_XENON
> +	tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
> +	depends on MMC_SDHCI && MMC_SDHCI_PLTFM
> +	help
> +	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
> +	  If you have a machine with integrated Marvell Xenon SDHC IP,
> +	  say Y or M here.
> +	  If unsure, say N.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index e2bdaaf43184..75eaf743486c 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -80,3 +80,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB)		+= sdhci-brcmstb.o
>  ifeq ($(CONFIG_CB710_DEBUG),y)
>  	CFLAGS-cb710-mmc	+= -DDEBUG
>  endif
> +
> +obj-$(CONFIG_MMC_SDHCI_XENON)	+= sdhci-xenon-driver.o
> +sdhci-xenon-driver-y		+= sdhci-xenon.o
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> new file mode 100644
> index 000000000000..c71439fbc308
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -0,0 +1,612 @@
> +/*
> + * Driver for Marvell Xenon SDHC as a platform device
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author:	Hu Ziji <huziji@marvell.com>
> + * Date:	2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * Inspired by Jisheng Zhang <jszhang@marvell.com>
> + * Special thanks to Video BG4 project team.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include "sdhci-pltfm.h"
> +#include "sdhci-xenon.h"
> +
> +static int enable_xenon_internal_clk(struct sdhci_host *host)
> +{
> +	u32 reg;
> +	u8 timeout;
> +
> +	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> +	reg |= SDHCI_CLOCK_INT_EN;
> +	sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +	/* Wait max 20 ms */
> +	timeout = 20;
> +	while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> +			& SDHCI_CLOCK_INT_STABLE)) {
> +		if (timeout == 0) {
> +			pr_err("%s: Internal clock never stabilised.\n",
> +			       mmc_hostname(host->mmc));
> +			return -ETIMEDOUT;
> +		}
> +		timeout--;
> +		mdelay(1);
> +	}
> +
> +	return 0;
> +}
> +
> +/* Set SDCLK-off-while-idle */
> +static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
> +				     unsigned char sdhc_id, bool enable)
> +{
> +	u32 reg;
> +	u32 mask;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	/* Get the bit shift basing on the SDHC index */
> +	mask = (0x1 << (SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
> +	if (enable)
> +		reg |= mask;
> +	else
> +		reg &= ~mask;
> +
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable/Disable the Auto Clock Gating function */
> +static void xenon_set_acg(struct sdhci_host *host, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	if (enable)
> +		reg &= ~SDHCI_AUTO_CLKGATE_DISABLE_MASK;
> +	else
> +		reg |= SDHCI_AUTO_CLKGATE_DISABLE_MASK;
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable this SDHC */
> +static void xenon_enable_sdhc(struct sdhci_host *host,
> +			      unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	reg |= (BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +
> +	/*
> +	 * Manually set the flag which all the card types require,
> +	 * including SD, eMMC, SDIO
> +	 */
> +	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
> +}
> +
> +/* Disable this SDHC */
> +static void xenon_disable_sdhc(struct sdhci_host *host,
> +			       unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_OP_CTRL);
> +	reg &= ~(BIT(sdhc_id) << SDHCI_SLOT_ENABLE_SHIFT);
> +	sdhci_writel(host, reg, SDHCI_SYS_OP_CTRL);
> +}
> +
> +/* Enable Parallel Transfer Mode */
> +static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
> +					    unsigned char sdhc_id)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
> +	reg |= BIT(sdhc_id);
> +	sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
> +}
> +
> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u32 reg;
> +
> +	/* Disable the Re-Tuning Request functionality */
> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
> +
> +	/* Disable the Re-tuning Event Signal Enable */
> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
> +	reg &= ~SDHCI_INT_RETUNE;
> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
> +
> +	/* Force to use Tuning Mode 1 */
> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
> +	/* Set re-tuning period */
> +	host->tuning_count = 1 << (priv->tuning_count - 1);

host->tuning_mode and host->tuning_count get overwritten in
sdhci_setup_host() called by sdhci_add_host()

> +}
> +
> +/*
> + * Operations inside struct sdhci_ops
> + */
> +/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
> +static void sdhci_xenon_reset_exit(struct sdhci_host *host,
> +				   unsigned char sdhc_id, u8 mask)
> +{
> +	/* Only SOFTWARE RESET ALL will clear the register setting */
> +	if (!(mask & SDHCI_RESET_ALL))
> +		return;
> +
> +	/* Disable tuning request and auto-retuning again */
> +	xenon_sdhc_tuning_setup(host);
> +
> +	xenon_set_acg(host, true);
> +
> +	xenon_set_sdclk_off_idle(host, sdhc_id, false);
> +}
> +
> +static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	sdhci_reset(host, mask);
> +	sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
> +}
> +
> +/*
> + * Xenon defines different values for HS200 and HS400
> + * in Host_Control_2
> + */
> +static void xenon_set_uhs_signaling(struct sdhci_host *host,
> +				    unsigned int timing)
> +{
> +	u16 ctrl_2;
> +
> +	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +	/* Select Bus Speed Mode for host */
> +	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
> +	if (timing == MMC_TIMING_MMC_HS200)
> +		ctrl_2 |= SDHCI_XENON_CTRL_HS200;
> +	else if (timing == MMC_TIMING_UHS_SDR104)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
> +	else if (timing == MMC_TIMING_UHS_SDR12)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
> +	else if (timing == MMC_TIMING_UHS_SDR25)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
> +	else if (timing == MMC_TIMING_UHS_SDR50)
> +		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
> +	else if ((timing == MMC_TIMING_UHS_DDR50) ||
> +		 (timing == MMC_TIMING_MMC_DDR52))
> +		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
> +	else if (timing == MMC_TIMING_MMC_HS400)
> +		ctrl_2 |= SDHCI_XENON_CTRL_HS400;
> +	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +}
> +
> +static const struct sdhci_ops sdhci_xenon_ops = {
> +	.set_clock		= sdhci_set_clock,
> +	.set_bus_width		= sdhci_set_bus_width,
> +	.reset			= sdhci_xenon_reset,
> +	.set_uhs_signaling	= xenon_set_uhs_signaling,
> +	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
> +	.ops = &sdhci_xenon_ops,
> +	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
> +		  SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
> +		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> +};
> +
> +/*
> + * Xenon Specific Operations in mmc_host_ops
> + */
> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	/*
> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
> +	 * Disable Preset Value register for HS400/HS200.
> +	 * eMMC HS with preset_enabled set will trigger a bug in
> +	 * get_preset_value().
> +	 */
> +	spin_lock_irqsave(&host->lock, flags);
> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
> +		host->preset_enabled = false;
> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> +
> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
> +	} else {
> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> +	}
> +	spin_unlock_irqrestore(&host->lock, flags);

At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
and add a callback instead.

> +
> +	sdhci_set_ios(mmc, ios);
> +
> +	if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
> +		spin_lock_irqsave(&host->lock, flags);
> +		xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
> +		spin_unlock_irqrestore(&host->lock, flags);
> +	}
> +}
> +
> +static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
> +					    struct mmc_ios *ios)
> +{
> +	unsigned char voltage = ios->signal_voltage;
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	unsigned char voltage_code;
> +	u32 ctrl;
> +
> +	if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
> +	    (voltage == MMC_SIGNAL_VOLTAGE_180)) {
> +		if (voltage == MMC_SIGNAL_VOLTAGE_330)
> +			voltage_code = SDHCI_EMMC_VCCQ_3_3V;
> +		else if (voltage == MMC_SIGNAL_VOLTAGE_180)
> +			voltage_code = SDHCI_EMMC_VCCQ_1_8V;
> +
> +		/*
> +		 * This host is for eMMC, XENON self-defined
> +		 * eMMC control register should be accessed
> +		 * instead of Host Control 2
> +		 */
> +		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
> +		ctrl &= ~SDHCI_EMMC_VCCQ_MASK;
> +		ctrl |= voltage_code;
> +		sdhci_writel(host, ctrl, SDHCI_SLOT_EMMC_CTRL);
> +
> +		/* There is no standard to determine this waiting period */
> +		usleep_range(1000, 2000);
> +
> +		/* Check whether io voltage switch is done */
> +		ctrl = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
> +		ctrl &= SDHCI_EMMC_VCCQ_MASK;
> +		/*
> +		 * This bit is set only when regulator feeds back
> +		 * the voltage switch results to Xenon SDHC.
> +		 * However, in actaul implementation, regulator might not
> +		 * provide this feedback.
> +		 * Thus we shall not rely on this bit to determine
> +		 * if switch failed.
> +		 * If the bit is not set, just throw a message.
> +		 * Besides, error code should not be returned.
> +		 */
> +		if (ctrl != voltage_code)
> +			dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
> +		return 0;
> +	}
> +
> +	dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
> +	return -EINVAL;
> +}
> +
> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
> +					     struct mmc_ios *ios)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	/*
> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
> +	 * disabled. However, sdhci_set_clock will also disable the Internal
> +	 * clock in mmc_set_signal_voltage().
> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
> +	 * Thus here manually enable internal clock.
> +	 *
> +	 * After switch completes, it is unnecessary to disable internal clock,
> +	 * since keeping internal clock active obeys SD spec.
> +	 */
> +	enable_xenon_internal_clk(host);

We could try the attached patch.

> +
> +	if (priv->init_card_type == MMC_TYPE_MMC)
> +		return xenon_emmc_signal_voltage_switch(mmc, ios);
> +
> +	return sdhci_start_signal_voltage_switch(mmc, ios);
> +}
> +
> +/*
> + * Update card type.
> + * priv->init_card_type will be used in PHY timing adjustment.
> + */
> +static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	/* Update card type*/
> +	priv->init_card_type = card->type;
> +}
> +
> +static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +
> +	if (host->timing == MMC_TIMING_UHS_DDR50)
> +		return 0;
> +
> +	return sdhci_execute_tuning(mmc, opcode);
> +}
> +
> +static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u32 reg;
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	sdhci_enable_sdio_irq(mmc, enable);
> +
> +	if (enable) {
> +		/*
> +		 * Set SDIO Card Inserted indication
> +		 * to enable detecting SDIO async irq.
> +		 */
> +		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		reg |= (1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
> +		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
> +	} else {
> +		/* Clear SDIO Card Inserted indication */
> +		reg = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		reg &= ~(1 << (sdhc_id + SDHCI_SLOT_TYPE_SDIO_SHIFT));
> +		sdhci_writel(host, reg, SDHCI_SYS_CFG_INFO);
> +	}
> +}
> +
> +static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
> +{
> +	host->mmc_host_ops.set_ios = xenon_set_ios;
> +	host->mmc_host_ops.start_signal_voltage_switch =
> +			xenon_start_signal_voltage_switch;
> +	host->mmc_host_ops.init_card = xenon_init_card;
> +	host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
> +	host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
> +}
> +
> +/*
> + * Parse child node in Xenon DT.
> + * Search for the following item(s):
> + * - eMMC card type
> + */
> +static int xenon_child_node_of_parse(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct mmc_host *mmc = host->mmc;
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	struct device_node *child;
> +	int nr_child;
> +
> +	priv->init_card_type = SDHCI_CARD_TYPE_UNKNOWN;
> +
> +	nr_child = of_get_child_count(np);
> +	if (!nr_child)
> +		return 0;
> +
> +	for_each_child_of_node(np, child) {
> +		if (of_device_is_compatible(child, "mmc-card"))	{
> +			priv->init_card_type = MMC_TYPE_MMC;
> +			mmc->caps |= MMC_CAP_NONREMOVABLE;
> +
> +			/*
> +			 * Force to clear BUS_TEST to
> +			 * skip bus_test_pre and bus_test_post
> +			 */
> +			mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
> +			mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
> +				      MMC_CAP2_PACKED_CMD |
> +				      MMC_CAP2_NO_SD |
> +				      MMC_CAP2_NO_SDIO;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int xenon_probe_dt(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct mmc_host *mmc = host->mmc;
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	int err;
> +	u32 sdhc_id, nr_sdhc;
> +	u32 tuning_count;
> +
> +	/* Standard MMC property */
> +	err = mmc_of_parse(mmc);
> +	if (err)
> +		return err;
> +
> +	/* Standard SDHCI property */
> +	sdhci_get_of_property(pdev);
> +
> +	/*
> +	 * Xenon Specific property:
> +	 * init_card_type: check whether this SDHC is for eMMC
> +	 * sdhc-id: the index of current SDHC.
> +	 *	    Refer to SDHCI_SYS_CFG_INFO register
> +	 * tun-count: the interval between re-tuning
> +	 */
> +	/* Parse child node, including checking emmc type */
> +	err = xenon_child_node_of_parse(pdev);
> +	if (err)
> +		return err;
> +
> +	priv->sdhc_id = 0x0;
> +	if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
> +		nr_sdhc = sdhci_readl(host, SDHCI_SYS_CFG_INFO);
> +		nr_sdhc &= SDHCI_NR_SUPPORTED_SLOT_MASK;
> +		if (unlikely(sdhc_id > nr_sdhc)) {
> +			dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
> +				sdhc_id, nr_sdhc);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	tuning_count = SDHCI_DEF_TUNING_COUNT;
> +	if (!of_property_read_u32(np, "marvell,xenon-tun-count",
> +				  &tuning_count)) {
> +		if (unlikely(tuning_count >= SDHCI_TMR_RETUN_NO_PRESENT)) {
> +			dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
> +				SDHCI_DEF_TUNING_COUNT);
> +			tuning_count = SDHCI_DEF_TUNING_COUNT;
> +		}
> +	}
> +	priv->tuning_count = tuning_count;
> +
> +	return err;
> +}
> +
> +static int xenon_sdhc_probe(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	/* Enable SDHC */
> +	xenon_enable_sdhc(host, sdhc_id);
> +
> +	/* Enable ACG */
> +	xenon_set_acg(host, true);
> +
> +	/* Enable Parallel Transfer Mode */
> +	xenon_enable_sdhc_parallel_tran(host, sdhc_id);
> +
> +	/* Set tuning functionality of this SDHC */
> +	xenon_sdhc_tuning_setup(host);
> +
> +	return 0;
> +}
> +
> +static void xenon_sdhc_remove(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	u8 sdhc_id = priv->sdhc_id;
> +
> +	/* disable SDHC */
> +	xenon_disable_sdhc(host, sdhc_id);
> +}
> +
> +static int sdhci_xenon_probe(struct platform_device *pdev)
> +{
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_host *host;
> +	struct sdhci_xenon_priv *priv;
> +	int err;
> +
> +	host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
> +				sizeof(struct sdhci_xenon_priv));
> +	if (IS_ERR(host))
> +		return PTR_ERR(host);
> +
> +	pltfm_host = sdhci_priv(host);
> +	priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	xenon_set_acg(host, false);
> +
> +	/*
> +	 * Link Xenon specific mmc_host_ops function,
> +	 * to replace standard ones in sdhci_ops.
> +	 */
> +	xenon_replace_mmc_host_ops(host);
> +
> +	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> +	if (IS_ERR(pltfm_host->clk)) {
> +		err = PTR_ERR(pltfm_host->clk);
> +		dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
> +		goto free_pltfm;
> +	}
> +	err = clk_prepare_enable(pltfm_host->clk);
> +	if (err)
> +		goto free_pltfm;
> +
> +	err = xenon_probe_dt(pdev);
> +	if (err)
> +		goto err_clk;
> +
> +	err = xenon_sdhc_probe(host);
> +	if (err)
> +		goto err_clk;
> +
> +	err = sdhci_add_host(host);
> +	if (err)
> +		goto remove_sdhc;
> +
> +	return 0;
> +
> +remove_sdhc:
> +	xenon_sdhc_remove(host);
> +err_clk:
> +	clk_disable_unprepare(pltfm_host->clk);
> +free_pltfm:
> +	sdhci_pltfm_free(pdev);
> +	return err;
> +}
> +
> +static int sdhci_xenon_remove(struct platform_device *pdev)
> +{
> +	struct sdhci_host *host = platform_get_drvdata(pdev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);

This 'dead' check was originally for PCI I think.  Unless you know it makes
sense for your device, I would leave it out. i.e. just do
sdhci_remove_host(host, 0);

> +
> +	xenon_sdhc_remove(host);
> +
> +	sdhci_remove_host(host, dead);
> +
> +	clk_disable_unprepare(pltfm_host->clk);
> +
> +	sdhci_pltfm_free(pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
> +	{ .compatible = "marvell,armada-7000-sdhci",},
> +	{ .compatible = "marvell,armada-3700-sdhci",},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
> +
> +static struct platform_driver sdhci_xenon_driver = {
> +	.driver	= {
> +		.name	= "xenon-sdhci",
> +		.of_match_table = sdhci_xenon_dt_ids,
> +		.pm = &sdhci_pltfm_pmops,
> +	},
> +	.probe	= sdhci_xenon_probe,
> +	.remove	= sdhci_xenon_remove,
> +};
> +
> +module_platform_driver(sdhci_xenon_driver);
> +
> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> new file mode 100644
> index 000000000000..d50cd663a265
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author:	Hu Ziji <huziji@marvell.com>
> + * Date:	2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +#ifndef SDHCI_XENON_H_
> +#define SDHCI_XENON_H_
> +
> +

Double blank line

> +/* Register Offset of Xenon SDHC self-defined register */
> +#define SDHCI_SYS_CFG_INFO			0x0104

A lot of these defines look like they could be just in sdhci-xenon.c or
sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
"SDHCI" because they are not standard.  "XENON" would be better.

> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
> +
> +#define SDHCI_SYS_OP_CTRL			0x0108
> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
> +#define SDHCI_SLOT_ENABLE_SHIFT			0
> +
> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
> +
> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
> +#define SDHCI_EMMC_VCCQ_MASK			0x3
> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
> +
> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
> +/* retuning compatible */
> +#define SDHCI_RETUNING_COMPATIBLE		0x1
> +
> +/* Tuning Parameter */
> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
> +#define SDHCI_DEF_TUNING_COUNT			0x9
> +
> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)

Unnecessary ()

> +
> +/* Xenon specific Mode Select value */
> +#define SDHCI_XENON_CTRL_HS200			0x5
> +#define SDHCI_XENON_CTRL_HS400			0x6
> +
> +/* Indicate Card Type is not clear yet */
> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
> +
> +struct sdhci_xenon_priv {
> +	unsigned char	tuning_count;
> +	/* idx of SDHC */
> +	u8		sdhc_id;
> +
> +	/*
> +	 * eMMC/SD/SDIO require different PHY settings or
> +	 * voltage control. It's necessary for Xenon driver to
> +	 * recognize card type during, or even before initialization.
> +	 * However, mmc_host->card is not available yet at that time.
> +	 * This field records the card type during init.
> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
> +	 * updated in xenon_init_card().
> +	 *
> +	 * It is only valid during initialization after it is updated.
> +	 * Do not access this variable in normal transfers after
> +	 * initialization completes.
> +	 */
> +	unsigned int	init_card_type;
> +};
> +
> +#endif
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-mmc-sdhci-Leave-internal-clock-on-when-bus-power-is-.patch
Type: text/x-patch
Size: 1423 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170104/f4ab8f52/attachment-0001.bin>

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: Re: [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  2017-01-04  7:26     ` Adrian Hunter
@ 2017-01-04  8:51       ` Ziji Hu
  -1 siblings, 0 replies; 48+ messages in thread
From: Ziji Hu @ 2017-01-04  8:51 UTC (permalink / raw)
  To: Adrian Hunter, Gregory CLEMENT, Ulf Hansson, linux-mmc
  Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
	Thomas Petazzoni, linux-arm-kernel, Jimmy Xu, Jisheng Zhang,
	Nadav Haklai, Ryan Gao, Doug Jones, Victor Gu, Wei(SOCP) Liu,
	Wilson Ding, Yehuda Yitschak, Marcin Wojtas, Hanna Hawa,
	Kostya Porotchkin

Hi Adrian,

On 2017/1/4 15:26, Adrian Hunter wrote:
> On 13/12/16 19:48, Gregory CLEMENT wrote:
>> From: Hu Ziji <huziji@marvell.com>
>>
>> Add Xenon eMMC/SD/SDIO host controller core functionality.
>> Add Xenon specific intialization process.
>> Add Xenon specific mmc_host_ops APIs.
>> Add Xenon specific register definitions.
>>
>> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>>
>> Marvell Xenon SDHC conforms to SD Physical Layer Specification
>> Version 3.01 and is designed according to the guidelines provided
>> in the SD Host Controller Standard Specification Version 3.00.
>>
>> Signed-off-by: Hu Ziji <huziji@marvell.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

<snip>

>> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
>> +{
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +	u32 reg;
>> +
>> +	/* Disable the Re-Tuning Request functionality */
>> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
>> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
>> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
>> +
>> +	/* Disable the Re-tuning Event Signal Enable */
>> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
>> +	reg &= ~SDHCI_INT_RETUNE;
>> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
>> +
>> +	/* Force to use Tuning Mode 1 */
>> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
>> +	/* Set re-tuning period */
>> +	host->tuning_count = 1 << (priv->tuning_count - 1);
> 
> host->tuning_mode and host->tuning_count get overwritten in
> sdhci_setup_host() called by sdhci_add_host()
> 

	You are correct.
	I will move it after sdhci_add_host().

>> +}
>> +
<snip>

>> +/*
>> + * Xenon Specific Operations in mmc_host_ops
>> + */
>> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +	unsigned long flags;
>> +	u32 reg;
>> +
>> +	/*
>> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
>> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
>> +	 * Disable Preset Value register for HS400/HS200.
>> +	 * eMMC HS with preset_enabled set will trigger a bug in
>> +	 * get_preset_value().
>> +	 */
>> +	spin_lock_irqsave(&host->lock, flags);
>> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
>> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
>> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
>> +		host->preset_enabled = false;
>> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>> +
>> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
>> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
>> +	} else {
>> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>> +	}
>> +	spin_unlock_irqrestore(&host->lock, flags);
> 
> At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
> and add a callback instead.
> 

	Thanks for the information.
	I would like to keep this workaround here, before the detailed patch is brought up.
	Is it OK to you?

>> +
<snip>
>> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
>> +					     struct mmc_ios *ios)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	/*
>> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
>> +	 * disabled. However, sdhci_set_clock will also disable the Internal
>> +	 * clock in mmc_set_signal_voltage().
>> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
>> +	 * Thus here manually enable internal clock.
>> +	 *
>> +	 * After switch completes, it is unnecessary to disable internal clock,
>> +	 * since keeping internal clock active obeys SD spec.
>> +	 */
>> +	enable_xenon_internal_clk(host);
> 
> We could try the attached patch.
> 

	I test your patch. It can work on my platforms.
	Thanks a lot.

	May I keep this workaround now?
	I would like to remove this workaround after your attached patch is applied.

>> +
<snip>
>> +static int sdhci_xenon_remove(struct platform_device *pdev)
>> +{
>> +	struct sdhci_host *host = platform_get_drvdata(pdev);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
> 
> This 'dead' check was originally for PCI I think.  Unless you know it makes
> sense for your device, I would leave it out. i.e. just do
> sdhci_remove_host(host, 0);
> 

	Got it. I will remove it.

>> +
>> +	xenon_sdhc_remove(host);
>> +
>> +	sdhci_remove_host(host, dead);
>> +
>> +	clk_disable_unprepare(pltfm_host->clk);
>> +
>> +	sdhci_pltfm_free(pdev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
>> +	{ .compatible = "marvell,armada-7000-sdhci",},
>> +	{ .compatible = "marvell,armada-3700-sdhci",},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>> +
>> +static struct platform_driver sdhci_xenon_driver = {
>> +	.driver	= {
>> +		.name	= "xenon-sdhci",
>> +		.of_match_table = sdhci_xenon_dt_ids,
>> +		.pm = &sdhci_pltfm_pmops,
>> +	},
>> +	.probe	= sdhci_xenon_probe,
>> +	.remove	= sdhci_xenon_remove,
>> +};
>> +
>> +module_platform_driver(sdhci_xenon_driver);
>> +
>> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
>> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
>> new file mode 100644
>> index 000000000000..d50cd663a265
>> --- /dev/null
>> +++ b/drivers/mmc/host/sdhci-xenon.h
>> @@ -0,0 +1,70 @@
>> +/*
>> + * Copyright (C) 2016 Marvell, All Rights Reserved.
>> + *
>> + * Author:	Hu Ziji <huziji@marvell.com>
>> + * Date:	2016-8-24
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + */
>> +#ifndef SDHCI_XENON_H_
>> +#define SDHCI_XENON_H_
>> +
>> +
> 
> Double blank line
> 
	Will remove it.

>> +/* Register Offset of Xenon SDHC self-defined register */
>> +#define SDHCI_SYS_CFG_INFO			0x0104
> 
> A lot of these defines look like they could be just in sdhci-xenon.c or
> sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
> "SDHCI" because they are not standard.  "XENON" would be better.
> 

	Some registers are accessed by bother sdhci-xenon.c and sdhci-xenon-phy.c.
	As a result, I list all the registers here in sdhci-xenon.h, for convenience.

	Previously, Ulf asked me to prefix them all with "SDHCI".
	I would like to know which prefix sounds more reasonable, "XENON_" or "SDHCI_XENON_"?

>> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
>> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
>> +
>> +#define SDHCI_SYS_OP_CTRL			0x0108
>> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
>> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
>> +#define SDHCI_SLOT_ENABLE_SHIFT			0
>> +
>> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
>> +
>> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
>> +#define SDHCI_EMMC_VCCQ_MASK			0x3
>> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
>> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
>> +
>> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
>> +/* retuning compatible */
>> +#define SDHCI_RETUNING_COMPATIBLE		0x1
>> +
>> +/* Tuning Parameter */
>> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
>> +#define SDHCI_DEF_TUNING_COUNT			0x9
>> +
>> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
> 
> Unnecessary ()
> 
	Will fix it.

	Thanks a lot for the review.

Best regards,
Hu Ziji

>> +
>> +/* Xenon specific Mode Select value */
>> +#define SDHCI_XENON_CTRL_HS200			0x5
>> +#define SDHCI_XENON_CTRL_HS400			0x6
>> +
>> +/* Indicate Card Type is not clear yet */
>> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
>> +
>> +struct sdhci_xenon_priv {
>> +	unsigned char	tuning_count;
>> +	/* idx of SDHC */
>> +	u8		sdhc_id;
>> +
>> +	/*
>> +	 * eMMC/SD/SDIO require different PHY settings or
>> +	 * voltage control. It's necessary for Xenon driver to
>> +	 * recognize card type during, or even before initialization.
>> +	 * However, mmc_host->card is not available yet at that time.
>> +	 * This field records the card type during init.
>> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
>> +	 * updated in xenon_init_card().
>> +	 *
>> +	 * It is only valid during initialization after it is updated.
>> +	 * Do not access this variable in normal transfers after
>> +	 * initialization completes.
>> +	 */
>> +	unsigned int	init_card_type;
>> +};
>> +
>> +#endif
>>
> 

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
@ 2017-01-04  8:51       ` Ziji Hu
  0 siblings, 0 replies; 48+ messages in thread
From: Ziji Hu @ 2017-01-04  8:51 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Adrian,

On 2017/1/4 15:26, Adrian Hunter wrote:
> On 13/12/16 19:48, Gregory CLEMENT wrote:
>> From: Hu Ziji <huziji@marvell.com>
>>
>> Add Xenon eMMC/SD/SDIO host controller core functionality.
>> Add Xenon specific intialization process.
>> Add Xenon specific mmc_host_ops APIs.
>> Add Xenon specific register definitions.
>>
>> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>>
>> Marvell Xenon SDHC conforms to SD Physical Layer Specification
>> Version 3.01 and is designed according to the guidelines provided
>> in the SD Host Controller Standard Specification Version 3.00.
>>
>> Signed-off-by: Hu Ziji <huziji@marvell.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

<snip>

>> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
>> +{
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +	u32 reg;
>> +
>> +	/* Disable the Re-Tuning Request functionality */
>> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
>> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
>> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
>> +
>> +	/* Disable the Re-tuning Event Signal Enable */
>> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
>> +	reg &= ~SDHCI_INT_RETUNE;
>> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
>> +
>> +	/* Force to use Tuning Mode 1 */
>> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
>> +	/* Set re-tuning period */
>> +	host->tuning_count = 1 << (priv->tuning_count - 1);
> 
> host->tuning_mode and host->tuning_count get overwritten in
> sdhci_setup_host() called by sdhci_add_host()
> 

	You are correct.
	I will move it after sdhci_add_host().

>> +}
>> +
<snip>

>> +/*
>> + * Xenon Specific Operations in mmc_host_ops
>> + */
>> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +	unsigned long flags;
>> +	u32 reg;
>> +
>> +	/*
>> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
>> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
>> +	 * Disable Preset Value register for HS400/HS200.
>> +	 * eMMC HS with preset_enabled set will trigger a bug in
>> +	 * get_preset_value().
>> +	 */
>> +	spin_lock_irqsave(&host->lock, flags);
>> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
>> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
>> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
>> +		host->preset_enabled = false;
>> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>> +
>> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
>> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
>> +	} else {
>> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>> +	}
>> +	spin_unlock_irqrestore(&host->lock, flags);
> 
> At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
> and add a callback instead.
> 

	Thanks for the information.
	I would like to keep this workaround here, before the detailed patch is brought up.
	Is it OK to you?

>> +
<snip>
>> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
>> +					     struct mmc_ios *ios)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	/*
>> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
>> +	 * disabled. However, sdhci_set_clock will also disable the Internal
>> +	 * clock in mmc_set_signal_voltage().
>> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
>> +	 * Thus here manually enable internal clock.
>> +	 *
>> +	 * After switch completes, it is unnecessary to disable internal clock,
>> +	 * since keeping internal clock active obeys SD spec.
>> +	 */
>> +	enable_xenon_internal_clk(host);
> 
> We could try the attached patch.
> 

	I test your patch. It can work on my platforms.
	Thanks a lot.

	May I keep this workaround now?
	I would like to remove this workaround after your attached patch is applied.

>> +
<snip>
>> +static int sdhci_xenon_remove(struct platform_device *pdev)
>> +{
>> +	struct sdhci_host *host = platform_get_drvdata(pdev);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
> 
> This 'dead' check was originally for PCI I think.  Unless you know it makes
> sense for your device, I would leave it out. i.e. just do
> sdhci_remove_host(host, 0);
> 

	Got it. I will remove it.

>> +
>> +	xenon_sdhc_remove(host);
>> +
>> +	sdhci_remove_host(host, dead);
>> +
>> +	clk_disable_unprepare(pltfm_host->clk);
>> +
>> +	sdhci_pltfm_free(pdev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
>> +	{ .compatible = "marvell,armada-7000-sdhci",},
>> +	{ .compatible = "marvell,armada-3700-sdhci",},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>> +
>> +static struct platform_driver sdhci_xenon_driver = {
>> +	.driver	= {
>> +		.name	= "xenon-sdhci",
>> +		.of_match_table = sdhci_xenon_dt_ids,
>> +		.pm = &sdhci_pltfm_pmops,
>> +	},
>> +	.probe	= sdhci_xenon_probe,
>> +	.remove	= sdhci_xenon_remove,
>> +};
>> +
>> +module_platform_driver(sdhci_xenon_driver);
>> +
>> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
>> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
>> new file mode 100644
>> index 000000000000..d50cd663a265
>> --- /dev/null
>> +++ b/drivers/mmc/host/sdhci-xenon.h
>> @@ -0,0 +1,70 @@
>> +/*
>> + * Copyright (C) 2016 Marvell, All Rights Reserved.
>> + *
>> + * Author:	Hu Ziji <huziji@marvell.com>
>> + * Date:	2016-8-24
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + */
>> +#ifndef SDHCI_XENON_H_
>> +#define SDHCI_XENON_H_
>> +
>> +
> 
> Double blank line
> 
	Will remove it.

>> +/* Register Offset of Xenon SDHC self-defined register */
>> +#define SDHCI_SYS_CFG_INFO			0x0104
> 
> A lot of these defines look like they could be just in sdhci-xenon.c or
> sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
> "SDHCI" because they are not standard.  "XENON" would be better.
> 

	Some registers are accessed by bother sdhci-xenon.c and sdhci-xenon-phy.c.
	As a result, I list all the registers here in sdhci-xenon.h, for convenience.

	Previously, Ulf asked me to prefix them all with "SDHCI".
	I would like to know which prefix sounds more reasonable, "XENON_" or "SDHCI_XENON_"?

>> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
>> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
>> +
>> +#define SDHCI_SYS_OP_CTRL			0x0108
>> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
>> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
>> +#define SDHCI_SLOT_ENABLE_SHIFT			0
>> +
>> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
>> +
>> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
>> +#define SDHCI_EMMC_VCCQ_MASK			0x3
>> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
>> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
>> +
>> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
>> +/* retuning compatible */
>> +#define SDHCI_RETUNING_COMPATIBLE		0x1
>> +
>> +/* Tuning Parameter */
>> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
>> +#define SDHCI_DEF_TUNING_COUNT			0x9
>> +
>> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
> 
> Unnecessary ()
> 
	Will fix it.

	Thanks a lot for the review.

Best regards,
Hu Ziji

>> +
>> +/* Xenon specific Mode Select value */
>> +#define SDHCI_XENON_CTRL_HS200			0x5
>> +#define SDHCI_XENON_CTRL_HS400			0x6
>> +
>> +/* Indicate Card Type is not clear yet */
>> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
>> +
>> +struct sdhci_xenon_priv {
>> +	unsigned char	tuning_count;
>> +	/* idx of SDHC */
>> +	u8		sdhc_id;
>> +
>> +	/*
>> +	 * eMMC/SD/SDIO require different PHY settings or
>> +	 * voltage control. It's necessary for Xenon driver to
>> +	 * recognize card type during, or even before initialization.
>> +	 * However, mmc_host->card is not available yet at that time.
>> +	 * This field records the card type during init.
>> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
>> +	 * updated in xenon_init_card().
>> +	 *
>> +	 * It is only valid during initialization after it is updated.
>> +	 * Do not access this variable in normal transfers after
>> +	 * initialization completes.
>> +	 */
>> +	unsigned int	init_card_type;
>> +};
>> +
>> +#endif
>>
> 

^ permalink raw reply	[flat|nested] 48+ messages in thread
* Re: [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
  2017-01-04  8:51       ` Ziji Hu
@ 2017-01-04  9:08         ` Adrian Hunter
  -1 siblings, 0 replies; 48+ messages in thread
From: Adrian Hunter @ 2017-01-04  9:08 UTC (permalink / raw)
  To: Ziji Hu, Gregory CLEMENT, Ulf Hansson, linux-mmc
  Cc: Thomas Petazzoni, Andrew Lunn, Yehuda Yitschak, Marcin Wojtas,
	Jason Cooper, Hanna Hawa, Nadav Haklai, Kostya Porotchkin,
	Jimmy Xu, Victor Gu, Ryan Gao, Jisheng Zhang, Doug Jones,
	Wei(SOCP) Liu, Wilson Ding, linux-arm-kernel,
	Sebastian Hesselbarth

On 04/01/17 10:51, Ziji Hu wrote:
> Hi Adrian,
> 
> On 2017/1/4 15:26, Adrian Hunter wrote:
>> On 13/12/16 19:48, Gregory CLEMENT wrote:
>>> From: Hu Ziji <huziji@marvell.com>
>>>
>>> Add Xenon eMMC/SD/SDIO host controller core functionality.
>>> Add Xenon specific intialization process.
>>> Add Xenon specific mmc_host_ops APIs.
>>> Add Xenon specific register definitions.
>>>
>>> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>>>
>>> Marvell Xenon SDHC conforms to SD Physical Layer Specification
>>> Version 3.01 and is designed according to the guidelines provided
>>> in the SD Host Controller Standard Specification Version 3.00.
>>>
>>> Signed-off-by: Hu Ziji <huziji@marvell.com>
>>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> 
> <snip>
> 
>>> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
>>> +{
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +	u32 reg;
>>> +
>>> +	/* Disable the Re-Tuning Request functionality */
>>> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
>>> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
>>> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
>>> +
>>> +	/* Disable the Re-tuning Event Signal Enable */
>>> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
>>> +	reg &= ~SDHCI_INT_RETUNE;
>>> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
>>> +
>>> +	/* Force to use Tuning Mode 1 */
>>> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
>>> +	/* Set re-tuning period */
>>> +	host->tuning_count = 1 << (priv->tuning_count - 1);
>>
>> host->tuning_mode and host->tuning_count get overwritten in
>> sdhci_setup_host() called by sdhci_add_host()
>>
> 
> 	You are correct.
> 	I will move it after sdhci_add_host().
> 
>>> +}
>>> +
> <snip>
> 
>>> +/*
>>> + * Xenon Specific Operations in mmc_host_ops
>>> + */
>>> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> +{
>>> +	struct sdhci_host *host = mmc_priv(mmc);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +	unsigned long flags;
>>> +	u32 reg;
>>> +
>>> +	/*
>>> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
>>> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
>>> +	 * Disable Preset Value register for HS400/HS200.
>>> +	 * eMMC HS with preset_enabled set will trigger a bug in
>>> +	 * get_preset_value().
>>> +	 */
>>> +	spin_lock_irqsave(&host->lock, flags);
>>> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
>>> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
>>> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
>>> +		host->preset_enabled = false;
>>> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>>> +
>>> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>>> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
>>> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
>>> +	} else {
>>> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>>> +	}
>>> +	spin_unlock_irqrestore(&host->lock, flags);
>>
>> At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
>> and add a callback instead.
>>
> 
> 	Thanks for the information.
> 	I would like to keep this workaround here, before the detailed patch is brought up.
> 	Is it OK to you?

Sure

> 
>>> +
> <snip>
>>> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
>>> +					     struct mmc_ios *ios)
>>> +{
>>> +	struct sdhci_host *host = mmc_priv(mmc);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +
>>> +	/*
>>> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
>>> +	 * disabled. However, sdhci_set_clock will also disable the Internal
>>> +	 * clock in mmc_set_signal_voltage().
>>> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
>>> +	 * Thus here manually enable internal clock.
>>> +	 *
>>> +	 * After switch completes, it is unnecessary to disable internal clock,
>>> +	 * since keeping internal clock active obeys SD spec.
>>> +	 */
>>> +	enable_xenon_internal_clk(host);
>>
>> We could try the attached patch.
>>
> 
> 	I test your patch. It can work on my platforms.
> 	Thanks a lot.
> 
> 	May I keep this workaround now?
> 	I would like to remove this workaround after your attached patch is applied.

Ok

> 
>>> +
> <snip>
>>> +static int sdhci_xenon_remove(struct platform_device *pdev)
>>> +{
>>> +	struct sdhci_host *host = platform_get_drvdata(pdev);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
>>
>> This 'dead' check was originally for PCI I think.  Unless you know it makes
>> sense for your device, I would leave it out. i.e. just do
>> sdhci_remove_host(host, 0);
>>
> 
> 	Got it. I will remove it.
> 
>>> +
>>> +	xenon_sdhc_remove(host);
>>> +
>>> +	sdhci_remove_host(host, dead);
>>> +
>>> +	clk_disable_unprepare(pltfm_host->clk);
>>> +
>>> +	sdhci_pltfm_free(pdev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
>>> +	{ .compatible = "marvell,armada-7000-sdhci",},
>>> +	{ .compatible = "marvell,armada-3700-sdhci",},
>>> +	{}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>>> +
>>> +static struct platform_driver sdhci_xenon_driver = {
>>> +	.driver	= {
>>> +		.name	= "xenon-sdhci",
>>> +		.of_match_table = sdhci_xenon_dt_ids,
>>> +		.pm = &sdhci_pltfm_pmops,
>>> +	},
>>> +	.probe	= sdhci_xenon_probe,
>>> +	.remove	= sdhci_xenon_remove,
>>> +};
>>> +
>>> +module_platform_driver(sdhci_xenon_driver);
>>> +
>>> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
>>> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
>>> new file mode 100644
>>> index 000000000000..d50cd663a265
>>> --- /dev/null
>>> +++ b/drivers/mmc/host/sdhci-xenon.h
>>> @@ -0,0 +1,70 @@
>>> +/*
>>> + * Copyright (C) 2016 Marvell, All Rights Reserved.
>>> + *
>>> + * Author:	Hu Ziji <huziji@marvell.com>
>>> + * Date:	2016-8-24
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + */
>>> +#ifndef SDHCI_XENON_H_
>>> +#define SDHCI_XENON_H_
>>> +
>>> +
>>
>> Double blank line
>>
> 	Will remove it.
> 
>>> +/* Register Offset of Xenon SDHC self-defined register */
>>> +#define SDHCI_SYS_CFG_INFO			0x0104
>>
>> A lot of these defines look like they could be just in sdhci-xenon.c or
>> sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
>> "SDHCI" because they are not standard.  "XENON" would be better.
>>
> 
> 	Some registers are accessed by bother sdhci-xenon.c and sdhci-xenon-phy.c.
> 	As a result, I list all the registers here in sdhci-xenon.h, for convenience.
> 
> 	Previously, Ulf asked me to prefix them all with "SDHCI".
> 	I would like to know which prefix sounds more reasonable, "XENON_" or "SDHCI_XENON_"?

I would use "XENON_"


> 
>>> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
>>> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
>>> +
>>> +#define SDHCI_SYS_OP_CTRL			0x0108
>>> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
>>> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
>>> +#define SDHCI_SLOT_ENABLE_SHIFT			0
>>> +
>>> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
>>> +
>>> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
>>> +#define SDHCI_EMMC_VCCQ_MASK			0x3
>>> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
>>> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
>>> +
>>> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
>>> +/* retuning compatible */
>>> +#define SDHCI_RETUNING_COMPATIBLE		0x1
>>> +
>>> +/* Tuning Parameter */
>>> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
>>> +#define SDHCI_DEF_TUNING_COUNT			0x9
>>> +
>>> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
>>
>> Unnecessary ()
>>
> 	Will fix it.
> 
> 	Thanks a lot for the review.
> 
> Best regards,
> Hu Ziji
> 
>>> +
>>> +/* Xenon specific Mode Select value */
>>> +#define SDHCI_XENON_CTRL_HS200			0x5
>>> +#define SDHCI_XENON_CTRL_HS400			0x6
>>> +
>>> +/* Indicate Card Type is not clear yet */
>>> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
>>> +
>>> +struct sdhci_xenon_priv {
>>> +	unsigned char	tuning_count;
>>> +	/* idx of SDHC */
>>> +	u8		sdhc_id;
>>> +
>>> +	/*
>>> +	 * eMMC/SD/SDIO require different PHY settings or
>>> +	 * voltage control. It's necessary for Xenon driver to
>>> +	 * recognize card type during, or even before initialization.
>>> +	 * However, mmc_host->card is not available yet at that time.
>>> +	 * This field records the card type during init.
>>> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
>>> +	 * updated in xenon_init_card().
>>> +	 *
>>> +	 * It is only valid during initialization after it is updated.
>>> +	 * Do not access this variable in normal transfers after
>>> +	 * initialization completes.
>>> +	 */
>>> +	unsigned int	init_card_type;
>>> +};
>>> +
>>> +#endif
>>>
>>
> 

^ permalink raw reply	[flat|nested] 48+ messages in thread
* [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
@ 2017-01-04  9:08         ` Adrian Hunter
  0 siblings, 0 replies; 48+ messages in thread
From: Adrian Hunter @ 2017-01-04  9:08 UTC (permalink / raw)
  To: linux-arm-kernel

On 04/01/17 10:51, Ziji Hu wrote:
> Hi Adrian,
> 
> On 2017/1/4 15:26, Adrian Hunter wrote:
>> On 13/12/16 19:48, Gregory CLEMENT wrote:
>>> From: Hu Ziji <huziji@marvell.com>
>>>
>>> Add Xenon eMMC/SD/SDIO host controller core functionality.
>>> Add Xenon specific intialization process.
>>> Add Xenon specific mmc_host_ops APIs.
>>> Add Xenon specific register definitions.
>>>
>>> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>>>
>>> Marvell Xenon SDHC conforms to SD Physical Layer Specification
>>> Version 3.01 and is designed according to the guidelines provided
>>> in the SD Host Controller Standard Specification Version 3.00.
>>>
>>> Signed-off-by: Hu Ziji <huziji@marvell.com>
>>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> 
> <snip>
> 
>>> +static void xenon_sdhc_tuning_setup(struct sdhci_host *host)
>>> +{
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +	u32 reg;
>>> +
>>> +	/* Disable the Re-Tuning Request functionality */
>>> +	reg = sdhci_readl(host, SDHCI_SLOT_RETUNING_REQ_CTRL);
>>> +	reg &= ~SDHCI_RETUNING_COMPATIBLE;
>>> +	sdhci_writel(host, reg, SDHCI_SLOT_RETUNING_REQ_CTRL);
>>> +
>>> +	/* Disable the Re-tuning Event Signal Enable */
>>> +	reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
>>> +	reg &= ~SDHCI_INT_RETUNE;
>>> +	sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
>>> +
>>> +	/* Force to use Tuning Mode 1 */
>>> +	host->tuning_mode = SDHCI_TUNING_MODE_1;
>>> +	/* Set re-tuning period */
>>> +	host->tuning_count = 1 << (priv->tuning_count - 1);
>>
>> host->tuning_mode and host->tuning_count get overwritten in
>> sdhci_setup_host() called by sdhci_add_host()
>>
> 
> 	You are correct.
> 	I will move it after sdhci_add_host().
> 
>>> +}
>>> +
> <snip>
> 
>>> +/*
>>> + * Xenon Specific Operations in mmc_host_ops
>>> + */
>>> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> +{
>>> +	struct sdhci_host *host = mmc_priv(mmc);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +	unsigned long flags;
>>> +	u32 reg;
>>> +
>>> +	/*
>>> +	 * HS400/HS200/eMMC HS doesn't have Preset Value register.
>>> +	 * However, sdhci_set_ios will read HS400/HS200 Preset register.
>>> +	 * Disable Preset Value register for HS400/HS200.
>>> +	 * eMMC HS with preset_enabled set will trigger a bug in
>>> +	 * get_preset_value().
>>> +	 */
>>> +	spin_lock_irqsave(&host->lock, flags);
>>> +	if ((ios->timing == MMC_TIMING_MMC_HS400) ||
>>> +	    (ios->timing == MMC_TIMING_MMC_HS200) ||
>>> +	    (ios->timing == MMC_TIMING_MMC_HS)) {
>>> +		host->preset_enabled = false;
>>> +		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>>> +
>>> +		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>>> +		reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
>>> +		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
>>> +	} else {
>>> +		host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>>> +	}
>>> +	spin_unlock_irqrestore(&host->lock, flags);
>>
>> At some point we will have to get rid of SDHCI_QUIRK2_PRESET_VALUE_BROKEN
>> and add a callback instead.
>>
> 
> 	Thanks for the information.
> 	I would like to keep this workaround here, before the detailed patch is brought up.
> 	Is it OK to you?

Sure

> 
>>> +
> <snip>
>>> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
>>> +					     struct mmc_ios *ios)
>>> +{
>>> +	struct sdhci_host *host = mmc_priv(mmc);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +
>>> +	/*
>>> +	 * Before SD/SDIO set signal voltage, SD bus clock should be
>>> +	 * disabled. However, sdhci_set_clock will also disable the Internal
>>> +	 * clock in mmc_set_signal_voltage().
>>> +	 * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
>>> +	 * Thus here manually enable internal clock.
>>> +	 *
>>> +	 * After switch completes, it is unnecessary to disable internal clock,
>>> +	 * since keeping internal clock active obeys SD spec.
>>> +	 */
>>> +	enable_xenon_internal_clk(host);
>>
>> We could try the attached patch.
>>
> 
> 	I test your patch. It can work on my platforms.
> 	Thanks a lot.
> 
> 	May I keep this workaround now?
> 	I would like to remove this workaround after your attached patch is applied.

Ok

> 
>>> +
> <snip>
>>> +static int sdhci_xenon_remove(struct platform_device *pdev)
>>> +{
>>> +	struct sdhci_host *host = platform_get_drvdata(pdev);
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xFFFFFFFF);
>>
>> This 'dead' check was originally for PCI I think.  Unless you know it makes
>> sense for your device, I would leave it out. i.e. just do
>> sdhci_remove_host(host, 0);
>>
> 
> 	Got it. I will remove it.
> 
>>> +
>>> +	xenon_sdhc_remove(host);
>>> +
>>> +	sdhci_remove_host(host, dead);
>>> +
>>> +	clk_disable_unprepare(pltfm_host->clk);
>>> +
>>> +	sdhci_pltfm_free(pdev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
>>> +	{ .compatible = "marvell,armada-7000-sdhci",},
>>> +	{ .compatible = "marvell,armada-3700-sdhci",},
>>> +	{}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>>> +
>>> +static struct platform_driver sdhci_xenon_driver = {
>>> +	.driver	= {
>>> +		.name	= "xenon-sdhci",
>>> +		.of_match_table = sdhci_xenon_dt_ids,
>>> +		.pm = &sdhci_pltfm_pmops,
>>> +	},
>>> +	.probe	= sdhci_xenon_probe,
>>> +	.remove	= sdhci_xenon_remove,
>>> +};
>>> +
>>> +module_platform_driver(sdhci_xenon_driver);
>>> +
>>> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
>>> +MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
>>> new file mode 100644
>>> index 000000000000..d50cd663a265
>>> --- /dev/null
>>> +++ b/drivers/mmc/host/sdhci-xenon.h
>>> @@ -0,0 +1,70 @@
>>> +/*
>>> + * Copyright (C) 2016 Marvell, All Rights Reserved.
>>> + *
>>> + * Author:	Hu Ziji <huziji@marvell.com>
>>> + * Date:	2016-8-24
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + */
>>> +#ifndef SDHCI_XENON_H_
>>> +#define SDHCI_XENON_H_
>>> +
>>> +
>>
>> Double blank line
>>
> 	Will remove it.
> 
>>> +/* Register Offset of Xenon SDHC self-defined register */
>>> +#define SDHCI_SYS_CFG_INFO			0x0104
>>
>> A lot of these defines look like they could be just in sdhci-xenon.c or
>> sdhci-xenon-phy.c.  It is also a little odd that they are prefixed by
>> "SDHCI" because they are not standard.  "XENON" would be better.
>>
> 
> 	Some registers are accessed by bother sdhci-xenon.c and sdhci-xenon-phy.c.
> 	As a result, I list all the registers here in sdhci-xenon.h, for convenience.
> 
> 	Previously, Ulf asked me to prefix them all with "SDHCI".
> 	I would like to know which prefix sounds more reasonable, "XENON_" or "SDHCI_XENON_"?

I would use "XENON_"


> 
>>> +#define SDHCI_SLOT_TYPE_SDIO_SHIFT		24
>>> +#define SDHCI_NR_SUPPORTED_SLOT_MASK		0x7
>>> +
>>> +#define SDHCI_SYS_OP_CTRL			0x0108
>>> +#define SDHCI_AUTO_CLKGATE_DISABLE_MASK		BIT(20)
>>> +#define SDHCI_SDCLK_IDLEOFF_ENABLE_SHIFT	8
>>> +#define SDHCI_SLOT_ENABLE_SHIFT			0
>>> +
>>> +#define SDHCI_SYS_EXT_OP_CTRL			0x010C
>>> +
>>> +#define SDHCI_SLOT_EMMC_CTRL			0x0130
>>> +#define SDHCI_EMMC_VCCQ_MASK			0x3
>>> +#define SDHCI_EMMC_VCCQ_1_8V			0x1
>>> +#define SDHCI_EMMC_VCCQ_3_3V			0x3
>>> +
>>> +#define SDHCI_SLOT_RETUNING_REQ_CTRL		0x0144
>>> +/* retuning compatible */
>>> +#define SDHCI_RETUNING_COMPATIBLE		0x1
>>> +
>>> +/* Tuning Parameter */
>>> +#define SDHCI_TMR_RETUN_NO_PRESENT		0xF
>>> +#define SDHCI_DEF_TUNING_COUNT			0x9
>>> +
>>> +#define SDHCI_DEFAULT_SDCLK_FREQ		(400000)
>>
>> Unnecessary ()
>>
> 	Will fix it.
> 
> 	Thanks a lot for the review.
> 
> Best regards,
> Hu Ziji
> 
>>> +
>>> +/* Xenon specific Mode Select value */
>>> +#define SDHCI_XENON_CTRL_HS200			0x5
>>> +#define SDHCI_XENON_CTRL_HS400			0x6
>>> +
>>> +/* Indicate Card Type is not clear yet */
>>> +#define SDHCI_CARD_TYPE_UNKNOWN			0xF
>>> +
>>> +struct sdhci_xenon_priv {
>>> +	unsigned char	tuning_count;
>>> +	/* idx of SDHC */
>>> +	u8		sdhc_id;
>>> +
>>> +	/*
>>> +	 * eMMC/SD/SDIO require different PHY settings or
>>> +	 * voltage control. It's necessary for Xenon driver to
>>> +	 * recognize card type during, or even before initialization.
>>> +	 * However, mmc_host->card is not available yet at that time.
>>> +	 * This field records the card type during init.
>>> +	 * For eMMC, it is updated in dt parse. For SD/SDIO, it is
>>> +	 * updated in xenon_init_card().
>>> +	 *
>>> +	 * It is only valid during initialization after it is updated.
>>> +	 * Do not access this variable in normal transfers after
>>> +	 * initialization completes.
>>> +	 */
>>> +	unsigned int	init_card_type;
>>> +};
>>> +
>>> +#endif
>>>
>>
> 

^ permalink raw reply	[flat|nested] 48+ messages in thread
end of thread, other threads:[~2017-01-04  9:08 UTC | newest]

Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-13 17:48 [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Gregory CLEMENT
2016-12-13 17:48 ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 01/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 03/12] mmc: sdhci: Export sdhci_execute_tuning() " Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 05/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-22 11:18   ` Russell King - ARM Linux
2016-12-22 11:18     ` Russell King - ARM Linux
2016-12-22 12:47     ` Ziji Hu
2016-12-22 12:47       ` Ziji Hu
2016-12-13 17:48 ` [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2017-01-04  7:26   ` Adrian Hunter
2017-01-04  7:26     ` Adrian Hunter
2017-01-04  8:51     ` Ziji Hu
2017-01-04  8:51       ` Ziji Hu
2017-01-04  9:08       ` Adrian Hunter
2017-01-04  9:08         ` Adrian Hunter
2016-12-13 17:48 ` [PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 09/12] mmc: sdhci-xenon: Add SOC PHY PAD voltage control Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-22 10:45   ` Russell King - ARM Linux
2016-12-22 10:45     ` Russell King - ARM Linux
2016-12-22 10:47     ` Thomas Petazzoni
2016-12-22 10:47       ` Thomas Petazzoni
2016-12-22 10:47   ` Russell King - ARM Linux
2016-12-22 10:47     ` Russell King - ARM Linux
2016-12-22 11:21   ` Russell King - ARM Linux
2016-12-22 11:21     ` Russell King - ARM Linux
2016-12-13 17:48 ` [PATCH v4 12/12] arm64: configs: enable SDHCI driver for Xenon Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
     [not found] ` <CAPv3WKeE_2gMn12MXraoUmDEJhi307mGuc4BgDYpethKNsMqRQ@mail.gmail.com>
2016-12-14 19:02   ` [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Marcin Wojtas
2016-12-14 19:02     ` Marcin Wojtas
2016-12-22 11:25 ` Russell King - ARM Linux
2016-12-22 11:25   ` Russell King - ARM Linux

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.