Linux-RISC-V Archive on lore.kernel.org
 help / color / Atom feed
* [RFC 0/3] Unify CPU topology across ARM64 & RISC-V 
@ 2018-11-09  1:50 atish.patra
  2018-11-09  1:50 ` Atish Patra
                   ` (4 more replies)
  0 siblings, 5 replies; 20+ messages in thread
From: atish.patra @ 2018-11-09  1:50 UTC (permalink / raw)
  To: linux-riscv

The cpu-map DT entry in ARM64 can describe the CPU topology in
much better way compared to other existing approaches. RISC-V can
easily adopt this binding to represent it's own CPU topology.
Thus, both cpu-map DT binding and topology parsing code can be
moved to a common location so that RISC-V or any other
architecture can leverage that.

The relevant discussion regarding unifying cpu topology can be
found in [1].

arch_topology seems to be a perfect place to move the common
code. I have not introduced any functional changes in the moved
to code. The only downside in this approach is that the capacity
code will be executed for RISC-V as well. But, it will exit
immediately after not able to find the appropriate DT node. If
the overhead is considered too much, we can always compile out
capacity related functions under a different config for the
architectures that do not support them.

The patches have been tested for RISC-V and compile tested for
ARM64.

The socket changes[2] can be merged on top of this series or vice
versa.

[1] https://lkml.org/lkml/2018/11/6/19
[2] https://lkml.org/lkml/2018/11/7/918

Atish Patra (3):
  dt-binding: cpu-topology: Move cpu-map to a common binding.
  cpu-topology: Move cpu topology code to common code.
  RISC-V: Parse cpu topology during boot.

 Documentation/devicetree/bindings/arm/topology.txt | 475 -------------------
 .../devicetree/bindings/cpu/cpu-topology.txt       | 526 +++++++++++++++++++++
 arch/arm64/include/asm/topology.h                  |  23 +-
 arch/arm64/kernel/topology.c                       | 305 +-----------
 arch/riscv/Kconfig                                 |   1 +
 arch/riscv/kernel/smpboot.c                        |   6 +-
 drivers/base/arch_topology.c                       | 303 ++++++++++++
 include/linux/arch_topology.h                      |  23 +
 include/linux/topology.h                           |   1 +
 9 files changed, 864 insertions(+), 799 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/topology.txt
 create mode 100644 Documentation/devicetree/bindings/cpu/cpu-topology.txt

-- 
2.7.4

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, back to index

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-09  1:50 [RFC 0/3] Unify CPU topology across ARM64 & RISC-V atish.patra
2018-11-09  1:50 ` Atish Patra
2018-11-09  1:50 ` [RFC 1/3] dt-binding: cpu-topology: Move cpu-map to a common binding atish.patra
2018-11-09  1:50   ` Atish Patra
2018-11-17 16:32   ` robh
2018-11-17 16:32     ` Rob Herring
2018-11-19 17:57     ` atish.patra
2018-11-19 17:57       ` Atish Patra
2018-11-09  1:50 ` [RFC 2/3] cpu-topology: Move cpu topology code to common code atish.patra
2018-11-09  1:50   ` Atish Patra
2018-11-09  1:50 ` [RFC 3/3] RISC-V: Parse cpu topology during boot atish.patra
2018-11-09  1:50   ` Atish Patra
2018-11-15 18:31 ` [RFC 0/3] Unify CPU topology across ARM64 & RISC-V jhugo
2018-11-15 18:31   ` Jeffrey Hugo
2018-11-19 17:46   ` atish.patra
2018-11-19 17:46     ` Atish Patra
2018-11-20 11:11   ` sudeep.holla
2018-11-20 11:11     ` Sudeep Holla
2018-11-20 15:28     ` jhugo
2018-11-20 15:28       ` Jeffrey Hugo

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org
	public-inbox-index linux-riscv

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git