[PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[Chen-Yu Tsai]

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

The TCON (LCD controller) found in Allwinner SoCs has hardware support
for dithering on channel 0, the channel used to feed LCD panels. This
series adds support for it.

Patch 1 reworks the mode set function for the CPU interface to pass
the encoder object, so it can be passed to other helper functions.

Patch 2 renames the dithering related register macros to reflect the
fact that dithering is only supported on channel 0.

Patch 3 adds support for dithering on all LCD panel output types.

Patch 4 adds support for Banana Pi's 7" DPI LCD panel.

Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
This change has been sent by others before.

Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
on the Banana Pi M1+. This should not be merged. I will likely rework
this into an overlay in the future.

Note that I was only able to test dithering with DPI, as I do not have
other panel types. However the underlying concept and core code is the
same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
can test LVDS and Maxime can test MIPI DSI.

Also it seems pwm-backlight hardware is unusable at the moment. I'm not
sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
manually poke the pwm registers so the LCD backlight wouldn't be
completely black.


Regards
ChenYu

Chen-Yu Tsai (5):
  drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
  drm/sun4i: tcon: Rename Dithering related register macros
  drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
  ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
  [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
    800x480 RGB LCD panel

Jonathan Liu (1):
  drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

 .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++
 .../boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 61 +++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi              | 11 +++
 drivers/gpu/drm/panel/panel-simple.c          | 25 ++++++
 drivers/gpu/drm/sun4i/sun4i_tcon.c            | 76 ++++++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h            | 27 ++++---
 6 files changed, 186 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt

-- 
2.17.0

[PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[Chen-Yu Tsai]

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

The TCON (LCD controller) found in Allwinner SoCs has hardware support
for dithering on channel 0, the channel used to feed LCD panels. This
series adds support for it.

Patch 1 reworks the mode set function for the CPU interface to pass
the encoder object, so it can be passed to other helper functions.

Patch 2 renames the dithering related register macros to reflect the
fact that dithering is only supported on channel 0.

Patch 3 adds support for dithering on all LCD panel output types.

Patch 4 adds support for Banana Pi's 7" DPI LCD panel.

Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
This change has been sent by others before.

Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
on the Banana Pi M1+. This should not be merged. I will likely rework
this into an overlay in the future.

Note that I was only able to test dithering with DPI, as I do not have
other panel types. However the underlying concept and core code is the
same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
can test LVDS and Maxime can test MIPI DSI.

Also it seems pwm-backlight hardware is unusable at the moment. I'm not
sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
manually poke the pwm registers so the LCD backlight wouldn't be
completely black.


Regards
ChenYu

Chen-Yu Tsai (5):
  drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
  drm/sun4i: tcon: Rename Dithering related register macros
  drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
  ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
  [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
    800x480 RGB LCD panel

Jonathan Liu (1):
  drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

 .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++
 .../boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 61 +++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi              | 11 +++
 drivers/gpu/drm/panel/panel-simple.c          | 25 ++++++
 drivers/gpu/drm/sun4i/sun4i_tcon.c            | 76 ++++++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h            | 27 ++++---
 6 files changed, 186 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt

-- 
2.17.0

[PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[Chen-Yu Tsai]

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

The TCON (LCD controller) found in Allwinner SoCs has hardware support
for dithering on channel 0, the channel used to feed LCD panels. This
series adds support for it.

Patch 1 reworks the mode set function for the CPU interface to pass
the encoder object, so it can be passed to other helper functions.

Patch 2 renames the dithering related register macros to reflect the
fact that dithering is only supported on channel 0.

Patch 3 adds support for dithering on all LCD panel output types.

Patch 4 adds support for Banana Pi's 7" DPI LCD panel.

Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
This change has been sent by others before.

Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
on the Banana Pi M1+. This should not be merged. I will likely rework
this into an overlay in the future.

Note that I was only able to test dithering with DPI, as I do not have
other panel types. However the underlying concept and core code is the
same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
can test LVDS and Maxime can test MIPI DSI.

Also it seems pwm-backlight hardware is unusable at the moment. I'm not
sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
manually poke the pwm registers so the LCD backlight wouldn't be
completely black.


Regards
ChenYu

Chen-Yu Tsai (5):
  drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
  drm/sun4i: tcon: Rename Dithering related register macros
  drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
  ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
  [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
    800x480 RGB LCD panel

Jonathan Liu (1):
  drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

 .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++
 .../boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 61 +++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi              | 11 +++
 drivers/gpu/drm/panel/panel-simple.c          | 25 ++++++
 drivers/gpu/drm/sun4i/sun4i_tcon.c            | 76 ++++++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h            | 27 ++++---
 6 files changed, 186 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt

-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu

[Chen-Yu Tsai]

sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.

The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.

Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 08747fc3ee71..2bd53ef7d4b8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -277,9 +277,12 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 }
 
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct mipi_dsi_device *device,
+				     struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
+	/* TODO support normal CPU interface modes */
+	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
+	struct mipi_dsi_device *device = dsi->device;
 	u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
 	u8 lanes = device->lanes;
 	u32 block_space, start_delay;
@@ -606,16 +609,10 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
 			 const struct drm_encoder *encoder,
 			 const struct drm_display_mode *mode)
 {
-	struct sun6i_dsi *dsi;
-
 	switch (encoder->encoder_type) {
 	case DRM_MODE_ENCODER_DSI:
-		/*
-		 * This is not really elegant, but it's the "cleaner"
-		 * way I could think of...
-		 */
-		dsi = encoder_to_sun6i_dsi(encoder);
-		sun4i_tcon0_mode_set_cpu(tcon, dsi->device, mode);
+		/* DSI is tied to special case of CPU interface */
+		sun4i_tcon0_mode_set_cpu(tcon, encoder, mode);
 		break;
 	case DRM_MODE_ENCODER_LVDS:
 		sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
-- 
2.17.0

[PATCH 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu

[Chen-Yu Tsai]

sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.

The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.

Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 08747fc3ee71..2bd53ef7d4b8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -277,9 +277,12 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 }
 
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct mipi_dsi_device *device,
+				     struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
+	/* TODO support normal CPU interface modes */
+	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
+	struct mipi_dsi_device *device = dsi->device;
 	u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
 	u8 lanes = device->lanes;
 	u32 block_space, start_delay;
@@ -606,16 +609,10 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
 			 const struct drm_encoder *encoder,
 			 const struct drm_display_mode *mode)
 {
-	struct sun6i_dsi *dsi;
-
 	switch (encoder->encoder_type) {
 	case DRM_MODE_ENCODER_DSI:
-		/*
-		 * This is not really elegant, but it's the "cleaner"
-		 * way I could think of...
-		 */
-		dsi = encoder_to_sun6i_dsi(encoder);
-		sun4i_tcon0_mode_set_cpu(tcon, dsi->device, mode);
+		/* DSI is tied to special case of CPU interface */
+		sun4i_tcon0_mode_set_cpu(tcon, encoder, mode);
 		break;
 	case DRM_MODE_ENCODER_LVDS:
 		sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
-- 
2.17.0

[PATCH 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu

[Chen-Yu Tsai]

sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.

The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.

Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 08747fc3ee71..2bd53ef7d4b8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -277,9 +277,12 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 }
 
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct mipi_dsi_device *device,
+				     struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
+	/* TODO support normal CPU interface modes */
+	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
+	struct mipi_dsi_device *device = dsi->device;
 	u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
 	u8 lanes = device->lanes;
 	u32 block_space, start_delay;
@@ -606,16 +609,10 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
 			 const struct drm_encoder *encoder,
 			 const struct drm_display_mode *mode)
 {
-	struct sun6i_dsi *dsi;
-
 	switch (encoder->encoder_type) {
 	case DRM_MODE_ENCODER_DSI:
-		/*
-		 * This is not really elegant, but it's the "cleaner"
-		 * way I could think of...
-		 */
-		dsi = encoder_to_sun6i_dsi(encoder);
-		sun4i_tcon0_mode_set_cpu(tcon, dsi->device, mode);
+		/* DSI is tied to special case of CPU interface */
+		sun4i_tcon0_mode_set_cpu(tcon, encoder, mode);
 		break;
 	case DRM_MODE_ENCODER_LVDS:
 		sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/6] drm/sun4i: tcon: Rename Dithering related register macros

[Chen-Yu Tsai]

Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".

Rename the macros to reflect this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.h | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f6a071cd5a6f..3d492c8be1fc 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -37,18 +37,21 @@
 #define SUN4I_TCON_GINT1_REG			0x8
 
 #define SUN4I_TCON_FRM_CTL_REG			0x10
-#define SUN4I_TCON_FRM_CTL_EN				BIT(31)
-
-#define SUN4I_TCON_FRM_SEED_PR_REG		0x14
-#define SUN4I_TCON_FRM_SEED_PG_REG		0x18
-#define SUN4I_TCON_FRM_SEED_PB_REG		0x1c
-#define SUN4I_TCON_FRM_SEED_LR_REG		0x20
-#define SUN4I_TCON_FRM_SEED_LG_REG		0x24
-#define SUN4I_TCON_FRM_SEED_LB_REG		0x28
-#define SUN4I_TCON_FRM_TBL0_REG			0x2c
-#define SUN4I_TCON_FRM_TBL1_REG			0x30
-#define SUN4I_TCON_FRM_TBL2_REG			0x34
-#define SUN4I_TCON_FRM_TBL3_REG			0x38
+#define SUN4I_TCON0_FRM_CTL_EN				BIT(31)
+#define SUN4I_TCON0_FRM_CTL_MODE_R			BIT(6)
+#define SUN4I_TCON0_FRM_CTL_MODE_G			BIT(5)
+#define SUN4I_TCON0_FRM_CTL_MODE_B			BIT(4)
+
+#define SUN4I_TCON0_FRM_SEED_PR_REG		0x14
+#define SUN4I_TCON0_FRM_SEED_PG_REG		0x18
+#define SUN4I_TCON0_FRM_SEED_PB_REG		0x1c
+#define SUN4I_TCON0_FRM_SEED_LR_REG		0x20
+#define SUN4I_TCON0_FRM_SEED_LG_REG		0x24
+#define SUN4I_TCON0_FRM_SEED_LB_REG		0x28
+#define SUN4I_TCON0_FRM_TBL0_REG		0x2c
+#define SUN4I_TCON0_FRM_TBL1_REG		0x30
+#define SUN4I_TCON0_FRM_TBL2_REG		0x34
+#define SUN4I_TCON0_FRM_TBL3_REG		0x38
 
 #define SUN4I_TCON0_CTL_REG			0x40
 #define SUN4I_TCON0_CTL_TCON_ENABLE			BIT(31)
-- 
2.17.0

[PATCH 2/6] drm/sun4i: tcon: Rename Dithering related register macros

[Chen-Yu Tsai]

Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".

Rename the macros to reflect this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.h | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f6a071cd5a6f..3d492c8be1fc 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -37,18 +37,21 @@
 #define SUN4I_TCON_GINT1_REG			0x8
 
 #define SUN4I_TCON_FRM_CTL_REG			0x10
-#define SUN4I_TCON_FRM_CTL_EN				BIT(31)
-
-#define SUN4I_TCON_FRM_SEED_PR_REG		0x14
-#define SUN4I_TCON_FRM_SEED_PG_REG		0x18
-#define SUN4I_TCON_FRM_SEED_PB_REG		0x1c
-#define SUN4I_TCON_FRM_SEED_LR_REG		0x20
-#define SUN4I_TCON_FRM_SEED_LG_REG		0x24
-#define SUN4I_TCON_FRM_SEED_LB_REG		0x28
-#define SUN4I_TCON_FRM_TBL0_REG			0x2c
-#define SUN4I_TCON_FRM_TBL1_REG			0x30
-#define SUN4I_TCON_FRM_TBL2_REG			0x34
-#define SUN4I_TCON_FRM_TBL3_REG			0x38
+#define SUN4I_TCON0_FRM_CTL_EN				BIT(31)
+#define SUN4I_TCON0_FRM_CTL_MODE_R			BIT(6)
+#define SUN4I_TCON0_FRM_CTL_MODE_G			BIT(5)
+#define SUN4I_TCON0_FRM_CTL_MODE_B			BIT(4)
+
+#define SUN4I_TCON0_FRM_SEED_PR_REG		0x14
+#define SUN4I_TCON0_FRM_SEED_PG_REG		0x18
+#define SUN4I_TCON0_FRM_SEED_PB_REG		0x1c
+#define SUN4I_TCON0_FRM_SEED_LR_REG		0x20
+#define SUN4I_TCON0_FRM_SEED_LG_REG		0x24
+#define SUN4I_TCON0_FRM_SEED_LB_REG		0x28
+#define SUN4I_TCON0_FRM_TBL0_REG		0x2c
+#define SUN4I_TCON0_FRM_TBL1_REG		0x30
+#define SUN4I_TCON0_FRM_TBL2_REG		0x34
+#define SUN4I_TCON0_FRM_TBL3_REG		0x38
 
 #define SUN4I_TCON0_CTL_REG			0x40
 #define SUN4I_TCON0_CTL_TCON_ENABLE			BIT(31)
-- 
2.17.0

[PATCH 2/6] drm/sun4i: tcon: Rename Dithering related register macros

[Chen-Yu Tsai]

Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".

Rename the macros to reflect this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.h | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f6a071cd5a6f..3d492c8be1fc 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -37,18 +37,21 @@
 #define SUN4I_TCON_GINT1_REG			0x8
 
 #define SUN4I_TCON_FRM_CTL_REG			0x10
-#define SUN4I_TCON_FRM_CTL_EN				BIT(31)
-
-#define SUN4I_TCON_FRM_SEED_PR_REG		0x14
-#define SUN4I_TCON_FRM_SEED_PG_REG		0x18
-#define SUN4I_TCON_FRM_SEED_PB_REG		0x1c
-#define SUN4I_TCON_FRM_SEED_LR_REG		0x20
-#define SUN4I_TCON_FRM_SEED_LG_REG		0x24
-#define SUN4I_TCON_FRM_SEED_LB_REG		0x28
-#define SUN4I_TCON_FRM_TBL0_REG			0x2c
-#define SUN4I_TCON_FRM_TBL1_REG			0x30
-#define SUN4I_TCON_FRM_TBL2_REG			0x34
-#define SUN4I_TCON_FRM_TBL3_REG			0x38
+#define SUN4I_TCON0_FRM_CTL_EN				BIT(31)
+#define SUN4I_TCON0_FRM_CTL_MODE_R			BIT(6)
+#define SUN4I_TCON0_FRM_CTL_MODE_G			BIT(5)
+#define SUN4I_TCON0_FRM_CTL_MODE_B			BIT(4)
+
+#define SUN4I_TCON0_FRM_SEED_PR_REG		0x14
+#define SUN4I_TCON0_FRM_SEED_PG_REG		0x18
+#define SUN4I_TCON0_FRM_SEED_PB_REG		0x1c
+#define SUN4I_TCON0_FRM_SEED_LR_REG		0x20
+#define SUN4I_TCON0_FRM_SEED_LG_REG		0x24
+#define SUN4I_TCON0_FRM_SEED_LB_REG		0x28
+#define SUN4I_TCON0_FRM_TBL0_REG		0x2c
+#define SUN4I_TCON0_FRM_TBL1_REG		0x30
+#define SUN4I_TCON0_FRM_TBL2_REG		0x34
+#define SUN4I_TCON0_FRM_TBL3_REG		0x38
 
 #define SUN4I_TCON0_CTL_REG			0x40
 #define SUN4I_TCON0_CTL_TCON_ENABLE			BIT(31)
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Chen-Yu Tsai]

From: Jonathan Liu <net147@gmail.com>

The hardware supports dithering on TCON channel 0 which is used for LCD
panels.

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

Hi Maxime,

The dithering parameters used here are different from the ones you used
in your MIPI DSI series. You might want to check if it still works for
you.

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 2bd53ef7d4b8..827518f4790e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -12,6 +12,7 @@
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_encoder.h>
@@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
 }
 
+static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
+					   const struct drm_connector *connector)
+{
+	u32 bus_format = 0;
+	u32 val = 0;
+
+	/* XXX Would this ever happen? */
+	if (!connector)
+		return;
+
+	/*
+	 * FIXME: Undocumented bits
+	 *
+	 * The whole dithering process and these parameters are not
+	 * explained in the vendor documents or BSP kernel code.
+	 */
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
+
+	/* Do dithering if panel only supports 6 bits per color */
+	if (connector->display_info.bpc == 6)
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+
+	if (connector->display_info.num_bus_formats == 1)
+		bus_format = connector->display_info.bus_formats[0];
+
+	/* Check the connection format */
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		/* R and B components are only 5 bits deep */
+		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
+		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		/* Fall through: enable dithering */
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+		break;
+	}
+
+	/* Write dithering settings */
+	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
+}
+
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct drm_encoder *encoder,
+				     const struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
 	/* TODO support normal CPU interface modes */
@@ -293,6 +345,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
 
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
 			   SUN4I_TCON0_CTL_IF_MASK,
 			   SUN4I_TCON0_CTL_IF_8080);
@@ -358,6 +413,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 7;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
@@ -434,6 +492,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
-- 
2.17.0

[PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Chen-Yu Tsai]

From: Jonathan Liu <net147@gmail.com>

The hardware supports dithering on TCON channel 0 which is used for LCD
panels.

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens at csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

Hi Maxime,

The dithering parameters used here are different from the ones you used
in your MIPI DSI series. You might want to check if it still works for
you.

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 2bd53ef7d4b8..827518f4790e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -12,6 +12,7 @@
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_encoder.h>
@@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
 }
 
+static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
+					   const struct drm_connector *connector)
+{
+	u32 bus_format = 0;
+	u32 val = 0;
+
+	/* XXX Would this ever happen? */
+	if (!connector)
+		return;
+
+	/*
+	 * FIXME: Undocumented bits
+	 *
+	 * The whole dithering process and these parameters are not
+	 * explained in the vendor documents or BSP kernel code.
+	 */
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
+
+	/* Do dithering if panel only supports 6 bits per color */
+	if (connector->display_info.bpc == 6)
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+
+	if (connector->display_info.num_bus_formats == 1)
+		bus_format = connector->display_info.bus_formats[0];
+
+	/* Check the connection format */
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		/* R and B components are only 5 bits deep */
+		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
+		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		/* Fall through: enable dithering */
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+		break;
+	}
+
+	/* Write dithering settings */
+	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
+}
+
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct drm_encoder *encoder,
+				     const struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
 	/* TODO support normal CPU interface modes */
@@ -293,6 +345,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
 
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
 			   SUN4I_TCON0_CTL_IF_MASK,
 			   SUN4I_TCON0_CTL_IF_8080);
@@ -358,6 +413,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 7;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
@@ -434,6 +492,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
-- 
2.17.0

[PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Chen-Yu Tsai]

From: Jonathan Liu <net147@gmail.com>

The hardware supports dithering on TCON channel 0 which is used for LCD
panels.

Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

Hi Maxime,

The dithering parameters used here are different from the ones you used
in your MIPI DSI series. You might want to check if it still works for
you.

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 2bd53ef7d4b8..827518f4790e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -12,6 +12,7 @@
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_encoder.h>
@@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
 }
 
+static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
+					   const struct drm_connector *connector)
+{
+	u32 bus_format = 0;
+	u32 val = 0;
+
+	/* XXX Would this ever happen? */
+	if (!connector)
+		return;
+
+	/*
+	 * FIXME: Undocumented bits
+	 *
+	 * The whole dithering process and these parameters are not
+	 * explained in the vendor documents or BSP kernel code.
+	 */
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
+	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
+
+	/* Do dithering if panel only supports 6 bits per color */
+	if (connector->display_info.bpc == 6)
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+
+	if (connector->display_info.num_bus_formats == 1)
+		bus_format = connector->display_info.bus_formats[0];
+
+	/* Check the connection format */
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		/* R and B components are only 5 bits deep */
+		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
+		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		/* Fall through: enable dithering */
+		val |= SUN4I_TCON0_FRM_CTL_EN;
+		break;
+	}
+
+	/* Write dithering settings */
+	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
+}
+
 static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
-				     struct drm_encoder *encoder,
+				     const struct drm_encoder *encoder,
 				     const struct drm_display_mode *mode)
 {
 	/* TODO support normal CPU interface modes */
@@ -293,6 +345,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
 
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
 			   SUN4I_TCON0_CTL_IF_MASK,
 			   SUN4I_TCON0_CTL_IF_8080);
@@ -358,6 +413,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 7;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
@@ -434,6 +492,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
+	/* Set dithering if needed */
+	sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
+
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 4024 bytes --]

Hi,

On Thu, Apr 19, 2018 at 05:32:22PM +0800, Chen-Yu Tsai wrote:
> From: Jonathan Liu <net147@gmail.com>
> 
> The hardware supports dithering on TCON channel 0 which is used for LCD
> panels.
> 
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
> 
> Signed-off-by: Jonathan Liu <net147@gmail.com>
> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> 
> Hi Maxime,
> 
> The dithering parameters used here are different from the ones you used
> in your MIPI DSI series. You might want to check if it still works for
> you.
> 
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 2bd53ef7d4b8..827518f4790e 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -12,6 +12,7 @@
>  
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_connector.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_encoder.h>
> @@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
>  		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
>  }
>  
> +static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
> +					   const struct drm_connector *connector)
> +{
> +	u32 bus_format = 0;
> +	u32 val = 0;
> +
> +	/* XXX Would this ever happen? */
> +	if (!connector)
> +		return;
> +
> +	/*
> +	 * FIXME: Undocumented bits
> +	 *
> +	 * The whole dithering process and these parameters are not
> +	 * explained in the vendor documents or BSP kernel code.
> +	 */
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
> +
> +	/* Do dithering if panel only supports 6 bits per color */
> +	if (connector->display_info.bpc == 6)
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +
> +	if (connector->display_info.num_bus_formats == 1)
> +		bus_format = connector->display_info.bus_formats[0];
> +
> +	/* Check the connection format */
> +	switch (bus_format) {
> +	case MEDIA_BUS_FMT_RGB565_1X16:
> +		/* R and B components are only 5 bits deep */
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> +		/* Fall through: enable dithering */
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +		break;
> +	}
> +
> +	/* Write dithering settings */
> +	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
> +}
> +
>  static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
> -				     struct drm_encoder *encoder,
> +				     const struct drm_encoder *encoder,

The whole serie looks good, but that should probbaly be part of the
first patch?

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Maxime Ripard]

Hi,

On Thu, Apr 19, 2018 at 05:32:22PM +0800, Chen-Yu Tsai wrote:
> From: Jonathan Liu <net147@gmail.com>
> 
> The hardware supports dithering on TCON channel 0 which is used for LCD
> panels.
> 
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
> 
> Signed-off-by: Jonathan Liu <net147@gmail.com>
> [wens at csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> 
> Hi Maxime,
> 
> The dithering parameters used here are different from the ones you used
> in your MIPI DSI series. You might want to check if it still works for
> you.
> 
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 2bd53ef7d4b8..827518f4790e 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -12,6 +12,7 @@
>  
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_connector.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_encoder.h>
> @@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
>  		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
>  }
>  
> +static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
> +					   const struct drm_connector *connector)
> +{
> +	u32 bus_format = 0;
> +	u32 val = 0;
> +
> +	/* XXX Would this ever happen? */
> +	if (!connector)
> +		return;
> +
> +	/*
> +	 * FIXME: Undocumented bits
> +	 *
> +	 * The whole dithering process and these parameters are not
> +	 * explained in the vendor documents or BSP kernel code.
> +	 */
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
> +
> +	/* Do dithering if panel only supports 6 bits per color */
> +	if (connector->display_info.bpc == 6)
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +
> +	if (connector->display_info.num_bus_formats == 1)
> +		bus_format = connector->display_info.bus_formats[0];
> +
> +	/* Check the connection format */
> +	switch (bus_format) {
> +	case MEDIA_BUS_FMT_RGB565_1X16:
> +		/* R and B components are only 5 bits deep */
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> +		/* Fall through: enable dithering */
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +		break;
> +	}
> +
> +	/* Write dithering settings */
> +	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
> +}
> +
>  static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
> -				     struct drm_encoder *encoder,
> +				     const struct drm_encoder *encoder,

The whole serie looks good, but that should probbaly be part of the
first patch?

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180419/4f651160/attachment-0001.sig>

Re: [PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 4024 bytes --]

Hi,

On Thu, Apr 19, 2018 at 05:32:22PM +0800, Chen-Yu Tsai wrote:
> From: Jonathan Liu <net147@gmail.com>
> 
> The hardware supports dithering on TCON channel 0 which is used for LCD
> panels.
> 
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
> 
> Signed-off-by: Jonathan Liu <net147@gmail.com>
> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> 
> Hi Maxime,
> 
> The dithering parameters used here are different from the ones you used
> in your MIPI DSI series. You might want to check if it still works for
> you.
> 
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 63 +++++++++++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 2bd53ef7d4b8..827518f4790e 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -12,6 +12,7 @@
>  
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_connector.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_encoder.h>
> @@ -276,8 +277,59 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
>  		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
>  }
>  
> +static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
> +					   const struct drm_connector *connector)
> +{
> +	u32 bus_format = 0;
> +	u32 val = 0;
> +
> +	/* XXX Would this ever happen? */
> +	if (!connector)
> +		return;
> +
> +	/*
> +	 * FIXME: Undocumented bits
> +	 *
> +	 * The whole dithering process and these parameters are not
> +	 * explained in the vendor documents or BSP kernel code.
> +	 */
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_PB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LR_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LG_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_SEED_LB_REG, 0x11111111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL0_REG, 0x01010000);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL1_REG, 0x15151111);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
> +	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
> +
> +	/* Do dithering if panel only supports 6 bits per color */
> +	if (connector->display_info.bpc == 6)
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +
> +	if (connector->display_info.num_bus_formats == 1)
> +		bus_format = connector->display_info.bus_formats[0];
> +
> +	/* Check the connection format */
> +	switch (bus_format) {
> +	case MEDIA_BUS_FMT_RGB565_1X16:
> +		/* R and B components are only 5 bits deep */
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_R;
> +		val |= SUN4I_TCON0_FRM_CTL_MODE_B;
> +	case MEDIA_BUS_FMT_RGB666_1X18:
> +	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> +		/* Fall through: enable dithering */
> +		val |= SUN4I_TCON0_FRM_CTL_EN;
> +		break;
> +	}
> +
> +	/* Write dithering settings */
> +	regmap_write(tcon->regs, SUN4I_TCON_FRM_CTL_REG, val);
> +}
> +
>  static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
> -				     struct drm_encoder *encoder,
> +				     const struct drm_encoder *encoder,

The whole serie looks good, but that should probbaly be part of the
first patch?

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.

This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
 drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
 2 files changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt

diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
new file mode 100644
index 000000000000..2ec35ce36e9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
@@ -0,0 +1,7 @@
+Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+Required properties:
+- compatible: should be "bananapi,s070wv20-ct16"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab404ee7..9bc037f74d6c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
 	},
 };
 
+static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
+	.clock = 30000,
+	.hdisplay = 800,
+	.hsync_start = 800 + 40,
+	.hsync_end = 800 + 40 + 48,
+	.htotal = 800 + 40 + 48 + 40,
+	.vdisplay = 480,
+	.vsync_start = 480 + 13,
+	.vsync_end = 480 + 13 + 3,
+	.vtotal = 480 + 13 + 3 + 29,
+};
+
+static const struct panel_desc bananapi_s070wv20_ct16 = {
+	.modes = &bananapi_s070wv20_ct16_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 86,
+	},
+};
+
 static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
 	{
 		.clock = 71900,
@@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "avic,tm070ddh03",
 		.data = &avic_tm070ddh03,
+	}, {
+		.compatible = "bananapi,s070wv20-ct16",
+		.data = &bananapi_s070wv20_ct16,
 	}, {
 		.compatible = "boe,nv101wxmn51",
 		.data = &boe_nv101wxmn51,
-- 
2.17.0

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.

This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
 drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
 2 files changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt

diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
new file mode 100644
index 000000000000..2ec35ce36e9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
@@ -0,0 +1,7 @@
+Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+Required properties:
+- compatible: should be "bananapi,s070wv20-ct16"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab404ee7..9bc037f74d6c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
 	},
 };
 
+static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
+	.clock = 30000,
+	.hdisplay = 800,
+	.hsync_start = 800 + 40,
+	.hsync_end = 800 + 40 + 48,
+	.htotal = 800 + 40 + 48 + 40,
+	.vdisplay = 480,
+	.vsync_start = 480 + 13,
+	.vsync_end = 480 + 13 + 3,
+	.vtotal = 480 + 13 + 3 + 29,
+};
+
+static const struct panel_desc bananapi_s070wv20_ct16 = {
+	.modes = &bananapi_s070wv20_ct16_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 154,
+		.height = 86,
+	},
+};
+
 static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
 	{
 		.clock = 71900,
@@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "avic,tm070ddh03",
 		.data = &avic_tm070ddh03,
+	}, {
+		.compatible = "bananapi,s070wv20-ct16",
+		.data = &bananapi_s070wv20_ct16,
 	}, {
 		.compatible = "boe,nv101wxmn51",
 		.data = &boe_nv101wxmn51,
-- 
2.17.0

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.

Judging from the code, the real vendor should be CDTech.
Take a look at their website:
http://www.cdtech-lcd.com/en/standardscreen.html

I point you my patch for inserting another similar panel:
https://patchwork.freedesktop.org/patch/211914/

Maybe it would make sense to use CDTech as the vendor,
because maybe Bananapi resells only it.
Or maybe it is a custom panel done for them,
but the same is for other panels I've submitted patches.
Micronova srl custom, but vendor is CDTech.

What do you think?

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>   2 files changed, 32 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index cbf1ab404ee7..9bc037f74d6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>   	},
>   };
>   
> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
> +	.clock = 30000,
> +	.hdisplay = 800,
> +	.hsync_start = 800 + 40,
> +	.hsync_end = 800 + 40 + 48,
> +	.htotal = 800 + 40 + 48 + 40,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 13,
> +	.vsync_end = 480 + 13 + 3,
> +	.vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static const struct panel_desc bananapi_s070wv20_ct16 = {
> +	.modes = &bananapi_s070wv20_ct16_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 154,
> +		.height = 86,
> +	},
> +};
> +
>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>   	{
>   		.clock = 71900,
> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[] = {
>   	}, {
>   		.compatible = "avic,tm070ddh03",
>   		.data = &avic_tm070ddh03,
> +	}, {
> +		.compatible = "bananapi,s070wv20-ct16",
> +		.data = &bananapi_s070wv20_ct16,
>   	}, {
>   		.compatible = "boe,nv101wxmn51",
>   		.data = &boe_nv101wxmn51,
> 

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.

Judging from the code, the real vendor should be CDTech.
Take a look at their website:
http://www.cdtech-lcd.com/en/standardscreen.html

I point you my patch for inserting another similar panel:
https://patchwork.freedesktop.org/patch/211914/

Maybe it would make sense to use CDTech as the vendor,
because maybe Bananapi resells only it.
Or maybe it is a custom panel done for them,
but the same is for other panels I've submitted patches.
Micronova srl custom, but vendor is CDTech.

What do you think?

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale ? 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>   2 files changed, 32 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index cbf1ab404ee7..9bc037f74d6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>   	},
>   };
>   
> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
> +	.clock = 30000,
> +	.hdisplay = 800,
> +	.hsync_start = 800 + 40,
> +	.hsync_end = 800 + 40 + 48,
> +	.htotal = 800 + 40 + 48 + 40,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 13,
> +	.vsync_end = 480 + 13 + 3,
> +	.vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static const struct panel_desc bananapi_s070wv20_ct16 = {
> +	.modes = &bananapi_s070wv20_ct16_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 154,
> +		.height = 86,
> +	},
> +};
> +
>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>   	{
>   		.clock = 71900,
> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[] = {
>   	}, {
>   		.compatible = "avic,tm070ddh03",
>   		.data = &avic_tm070ddh03,
> +	}, {
> +		.compatible = "bananapi,s070wv20-ct16",
> +		.data = &bananapi_s070wv20_ct16,
>   	}, {
>   		.compatible = "boe,nv101wxmn51",
>   		.data = &boe_nv101wxmn51,
> 

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.

Judging from the code, the real vendor should be CDTech.
Take a look at their website:
http://www.cdtech-lcd.com/en/standardscreen.html

I point you my patch for inserting another similar panel:
https://patchwork.freedesktop.org/patch/211914/

Maybe it would make sense to use CDTech as the vendor,
because maybe Bananapi resells only it.
Or maybe it is a custom panel done for them,
but the same is for other panels I've submitted patches.
Micronova srl custom, but vendor is CDTech.

What do you think?

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>   2 files changed, 32 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index cbf1ab404ee7..9bc037f74d6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>   	},
>   };
>   
> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
> +	.clock = 30000,
> +	.hdisplay = 800,
> +	.hsync_start = 800 + 40,
> +	.hsync_end = 800 + 40 + 48,
> +	.htotal = 800 + 40 + 48 + 40,
> +	.vdisplay = 480,
> +	.vsync_start = 480 + 13,
> +	.vsync_end = 480 + 13 + 3,
> +	.vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static const struct panel_desc bananapi_s070wv20_ct16 = {
> +	.modes = &bananapi_s070wv20_ct16_mode,
> +	.num_modes = 1,
> +	.bpc = 6,
> +	.size = {
> +		.width = 154,
> +		.height = 86,
> +	},
> +};
> +
>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>   	{
>   		.clock = 71900,
> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[] = {
>   	}, {
>   		.compatible = "avic,tm070ddh03",
>   		.data = &avic_tm070ddh03,
> +	}, {
> +		.compatible = "bananapi,s070wv20-ct16",
> +		.data = &bananapi_s070wv20_ct16,
>   	}, {
>   		.compatible = "boe,nv101wxmn51",
>   		.data = &boe_nv101wxmn51,
> 



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
<giulio.benetti@micronovasrl.com> wrote:
> Hi,
>
> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>
>
> Judging from the code, the real vendor should be CDTech.
> Take a look at their website:
> http://www.cdtech-lcd.com/en/standardscreen.html
>
> I point you my patch for inserting another similar panel:
> https://patchwork.freedesktop.org/patch/211914/
>
> Maybe it would make sense to use CDTech as the vendor,
> because maybe Bananapi resells only it.
> Or maybe it is a custom panel done for them,
> but the same is for other panels I've submitted patches.
> Micronova srl custom, but vendor is CDTech.
>
> What do you think?

That might be true. But for people without access to the vendors,
this is horribly hard to figure out. People are only going to look
at whatever marking there is on the LCD panel, and whatever the
seller says. This panel has the model number stickered on, but the
PCB attached to it only has the Banana Pi logo.

And given it's a custom piece, probably OEM or ODM, the real
manufacturer matters less. You don't mention "Foxconn" as the
vendor of the iPhone, do you?

ChenYu

>
> --
> Giulio Benetti
> CTO
>
> MICRONOVA SRL
> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
> Tel. 049/8931563 - Fax 049/8931346
> Cod.Fiscale - P.IVA 02663420285
> Capitale Sociale € 26.000 i.v.
> Iscritta al Reg. Imprese di Padova N. 02663420285
> Numero R.E.A. 258642
>
>
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>   2 files changed, 32 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is
>> specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>> b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>   };
>>   +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>> +
>>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>         {
>>                 .clock = 71900,
>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>> = {
>>         }, {
>>                 .compatible = "avic,tm070ddh03",
>>                 .data = &avic_tm070ddh03,
>> +       }, {
>> +               .compatible = "bananapi,s070wv20-ct16",
>> +               .data = &bananapi_s070wv20_ct16,
>>         }, {
>>                 .compatible = "boe,nv101wxmn51",
>>                 .data = &boe_nv101wxmn51,
>>
>
>
>

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
<giulio.benetti@micronovasrl.com> wrote:
> Hi,
>
> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>
>
> Judging from the code, the real vendor should be CDTech.
> Take a look at their website:
> http://www.cdtech-lcd.com/en/standardscreen.html
>
> I point you my patch for inserting another similar panel:
> https://patchwork.freedesktop.org/patch/211914/
>
> Maybe it would make sense to use CDTech as the vendor,
> because maybe Bananapi resells only it.
> Or maybe it is a custom panel done for them,
> but the same is for other panels I've submitted patches.
> Micronova srl custom, but vendor is CDTech.
>
> What do you think?

That might be true. But for people without access to the vendors,
this is horribly hard to figure out. People are only going to look
at whatever marking there is on the LCD panel, and whatever the
seller says. This panel has the model number stickered on, but the
PCB attached to it only has the Banana Pi logo.

And given it's a custom piece, probably OEM or ODM, the real
manufacturer matters less. You don't mention "Foxconn" as the
vendor of the iPhone, do you?

ChenYu

>
> --
> Giulio Benetti
> CTO
>
> MICRONOVA SRL
> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
> Tel. 049/8931563 - Fax 049/8931346
> Cod.Fiscale - P.IVA 02663420285
> Capitale Sociale ? 26.000 i.v.
> Iscritta al Reg. Imprese di Padova N. 02663420285
> Numero R.E.A. 258642
>
>
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>   2 files changed, 32 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is
>> specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>> b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>   };
>>   +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>> +
>>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>         {
>>                 .clock = 71900,
>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>> = {
>>         }, {
>>                 .compatible = "avic,tm070ddh03",
>>                 .data = &avic_tm070ddh03,
>> +       }, {
>> +               .compatible = "bananapi,s070wv20-ct16",
>> +               .data = &bananapi_s070wv20_ct16,
>>         }, {
>>                 .compatible = "boe,nv101wxmn51",
>>                 .data = &boe_nv101wxmn51,
>>
>
>
>

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
<giulio.benetti@micronovasrl.com> wrote:
> Hi,
>
> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>
>
> Judging from the code, the real vendor should be CDTech.
> Take a look at their website:
> http://www.cdtech-lcd.com/en/standardscreen.html
>
> I point you my patch for inserting another similar panel:
> https://patchwork.freedesktop.org/patch/211914/
>
> Maybe it would make sense to use CDTech as the vendor,
> because maybe Bananapi resells only it.
> Or maybe it is a custom panel done for them,
> but the same is for other panels I've submitted patches.
> Micronova srl custom, but vendor is CDTech.
>
> What do you think?

That might be true. But for people without access to the vendors,
this is horribly hard to figure out. People are only going to look
at whatever marking there is on the LCD panel, and whatever the
seller says. This panel has the model number stickered on, but the
PCB attached to it only has the Banana Pi logo.

And given it's a custom piece, probably OEM or ODM, the real
manufacturer matters less. You don't mention "Foxconn" as the
vendor of the iPhone, do you?

ChenYu

>
> --
> Giulio Benetti
> CTO
>
> MICRONOVA SRL
> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
> Tel. 049/8931563 - Fax 049/8931346
> Cod.Fiscale - P.IVA 02663420285
> Capitale Sociale € 26.000 i.v.
> Iscritta al Reg. Imprese di Padova N. 02663420285
> Numero R.E.A. 258642
>
>
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>   .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>   drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>   2 files changed, 32 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is
>> specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>> b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>   };
>>   +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>> +
>>   static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>         {
>>                 .clock = 71900,
>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>> = {
>>         }, {
>>                 .compatible = "avic,tm070ddh03",
>>                 .data = &avic_tm070ddh03,
>> +       }, {
>> +               .compatible = "bananapi,s070wv20-ct16",
>> +               .data = &bananapi_s070wv20_ct16,
>>         }, {
>>                 .compatible = "boe,nv101wxmn51",
>>                 .data = &boe_nv101wxmn51,
>>
>
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale € 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale ? 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale ? 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Giulio Benetti]

Hi,

Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
> 
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.

Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.

> 
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?

:) that's right.

Best regards

-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

> 
> ChenYu
> 
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale € 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>    .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>    drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>    2 files changed, 32 insertions(+)
>>>    create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>          },
>>>    };
>>>    +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>> +
>>>    static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>>          {
>>>                  .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>>          }, {
>>>                  .compatible = "avic,tm070ddh03",
>>>                  .data = &avic_tm070ddh03,
>>> +       }, {
>>> +               .compatible = "bananapi,s070wv20-ct16",
>>> +               .data = &bananapi_s070wv20_ct16,
>>>          }, {
>>>                  .compatible = "boe,nv101wxmn51",
>>>                  .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Rob Herring]

On Thu, Apr 19, 2018 at 05:32:23PM +0800, Chen-Yu Tsai wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.

Does this panel have a power supply (or more than 1) or backlight? I 
can't know that by just refering to simple-panel.txt.

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Rob Herring]

On Thu, Apr 19, 2018 at 05:32:23PM +0800, Chen-Yu Tsai wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.

Does this panel have a power supply (or more than 1) or backlight? I 
can't know that by just refering to simple-panel.txt.

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Rob Herring]

On Thu, Apr 19, 2018 at 05:32:23PM +0800, Chen-Yu Tsai wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
> 
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.

Does this panel have a power supply (or more than 1) or backlight? I 
can't know that by just refering to simple-panel.txt.

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Jagan Teki]

On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
>
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index cbf1ab404ee7..9bc037f74d6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>         },
>  };
>
> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
> +       .clock = 30000,
> +       .hdisplay = 800,
> +       .hsync_start = 800 + 40,
> +       .hsync_end = 800 + 40 + 48,
> +       .htotal = 800 + 40 + 48 + 40,
> +       .vdisplay = 480,
> +       .vsync_start = 480 + 13,
> +       .vsync_end = 480 + 13 + 3,
> +       .vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static const struct panel_desc bananapi_s070wv20_ct16 = {
> +       .modes = &bananapi_s070wv20_ct16_mode,
> +       .num_modes = 1,
> +       .bpc = 6,
> +       .size = {
> +               .width = 154,
> +               .height = 86,
> +       },
> +};

I think this parallel RGB interface right? I too have same display
with DSI I'm sure these setting will not useful right? do we need to
write separate panel driver for that?

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Jagan Teki]

On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
>
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> new file mode 100644
> index 000000000000..2ec35ce36e9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
> @@ -0,0 +1,7 @@
> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
> +
> +Required properties:
> +- compatible: should be "bananapi,s070wv20-ct16"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index cbf1ab404ee7..9bc037f74d6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>         },
>  };
>
> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
> +       .clock = 30000,
> +       .hdisplay = 800,
> +       .hsync_start = 800 + 40,
> +       .hsync_end = 800 + 40 + 48,
> +       .htotal = 800 + 40 + 48 + 40,
> +       .vdisplay = 480,
> +       .vsync_start = 480 + 13,
> +       .vsync_end = 480 + 13 + 3,
> +       .vtotal = 480 + 13 + 3 + 29,
> +};
> +
> +static const struct panel_desc bananapi_s070wv20_ct16 = {
> +       .modes = &bananapi_s070wv20_ct16_mode,
> +       .num_modes = 1,
> +       .bpc = 6,
> +       .size = {
> +               .width = 154,
> +               .height = 86,
> +       },
> +};

I think this parallel RGB interface right? I too have same display
with DSI I'm sure these setting will not useful right? do we need to
write separate panel driver for that?

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>  2 files changed, 32 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>  };
>>
>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>
> I think this parallel RGB interface right? I too have same display
> with DSI I'm sure these setting will not useful right? do we need to
> write separate panel driver for that?

AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
connector board. The model I have is dual interface.

ChenYu

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>  2 files changed, 32 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>  };
>>
>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>
> I think this parallel RGB interface right? I too have same display
> with DSI I'm sure these setting will not useful right? do we need to
> write separate panel driver for that?

AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
connector board. The model I have is dual interface.

ChenYu

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>> a sticker denoting the model name S070WV20-CT16.
>>
>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>> However the panel only does 262k colors.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>  2 files changed, 32 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> new file mode 100644
>> index 000000000000..2ec35ce36e9a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>> @@ -0,0 +1,7 @@
>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>> +
>> +Required properties:
>> +- compatible: should be "bananapi,s070wv20-ct16"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index cbf1ab404ee7..9bc037f74d6c 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>         },
>>  };
>>
>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>> +       .clock = 30000,
>> +       .hdisplay = 800,
>> +       .hsync_start = 800 + 40,
>> +       .hsync_end = 800 + 40 + 48,
>> +       .htotal = 800 + 40 + 48 + 40,
>> +       .vdisplay = 480,
>> +       .vsync_start = 480 + 13,
>> +       .vsync_end = 480 + 13 + 3,
>> +       .vtotal = 480 + 13 + 3 + 29,
>> +};
>> +
>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>> +       .modes = &bananapi_s070wv20_ct16_mode,
>> +       .num_modes = 1,
>> +       .bpc = 6,
>> +       .size = {
>> +               .width = 154,
>> +               .height = 86,
>> +       },
>> +};
>
> I think this parallel RGB interface right? I too have same display
> with DSI I'm sure these setting will not useful right? do we need to
> write separate panel driver for that?

AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
connector board. The model I have is dual interface.

ChenYu
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Jagan Teki]

On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>  2 files changed, 32 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>         },
>>>  };
>>>
>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>
>> I think this parallel RGB interface right? I too have same display
>> with DSI I'm sure these setting will not useful right? do we need to
>> write separate panel driver for that?
>
> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
> connector board. The model I have is dual interface.

Yes, this is what I have [1] where same strip can use for both RGB and
MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

[1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html

Jagan.

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Jagan Teki]

On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>  2 files changed, 32 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>         },
>>>  };
>>>
>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> +       .clock = 30000,
>>> +       .hdisplay = 800,
>>> +       .hsync_start = 800 + 40,
>>> +       .hsync_end = 800 + 40 + 48,
>>> +       .htotal = 800 + 40 + 48 + 40,
>>> +       .vdisplay = 480,
>>> +       .vsync_start = 480 + 13,
>>> +       .vsync_end = 480 + 13 + 3,
>>> +       .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>> +       .num_modes = 1,
>>> +       .bpc = 6,
>>> +       .size = {
>>> +               .width = 154,
>>> +               .height = 86,
>>> +       },
>>> +};
>>
>> I think this parallel RGB interface right? I too have same display
>> with DSI I'm sure these setting will not useful right? do we need to
>> write separate panel driver for that?
>
> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
> connector board. The model I have is dual interface.

Yes, this is what I have [1] where same strip can use for both RGB and
MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

[1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html

Jagan.

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Wed, May 16, 2018 at 12:20 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>>> a sticker denoting the model name S070WV20-CT16.
>>>>
>>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>>> However the panel only does 262k colors.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>>  2 files changed, 32 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> new file mode 100644
>>>> index 000000000000..2ec35ce36e9a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> @@ -0,0 +1,7 @@
>>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>>> +
>>>> +Required properties:
>>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>>> +
>>>> +This binding is compatible with the simple-panel binding, which is specified
>>>> +in simple-panel.txt in this directory.
>>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>>         },
>>>>  };
>>>>
>>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>>> +       .clock = 30000,
>>>> +       .hdisplay = 800,
>>>> +       .hsync_start = 800 + 40,
>>>> +       .hsync_end = 800 + 40 + 48,
>>>> +       .htotal = 800 + 40 + 48 + 40,
>>>> +       .vdisplay = 480,
>>>> +       .vsync_start = 480 + 13,
>>>> +       .vsync_end = 480 + 13 + 3,
>>>> +       .vtotal = 480 + 13 + 3 + 29,
>>>> +};
>>>> +
>>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>>> +       .num_modes = 1,
>>>> +       .bpc = 6,
>>>> +       .size = {
>>>> +               .width = 154,
>>>> +               .height = 86,
>>>> +       },
>>>> +};
>>>
>>> I think this parallel RGB interface right? I too have same display
>>> with DSI I'm sure these setting will not useful right? do we need to
>>> write separate panel driver for that?
>>
>> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
>> connector board. The model I have is dual interface.
>
> Yes, this is what I have [1] where same strip can use for both RGB and
> MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

In theory yes. You can use RGB with Banana Pi M1+ and DSI with Banana Pi M3.
However, DSI on A83T is not supported yet, and I don't intend to spend my
time writing a driver for the MIPI DSI bridge on that panel. The bridge IC
is the one on top of the DSI FPC connector.

ChenYu

> [1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html
>
> Jagan.

[PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Wed, May 16, 2018 at 12:20 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>>> a sticker denoting the model name S070WV20-CT16.
>>>>
>>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>>> However the panel only does 262k colors.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>>  2 files changed, 32 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> new file mode 100644
>>>> index 000000000000..2ec35ce36e9a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> @@ -0,0 +1,7 @@
>>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>>> +
>>>> +Required properties:
>>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>>> +
>>>> +This binding is compatible with the simple-panel binding, which is specified
>>>> +in simple-panel.txt in this directory.
>>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>>         },
>>>>  };
>>>>
>>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>>> +       .clock = 30000,
>>>> +       .hdisplay = 800,
>>>> +       .hsync_start = 800 + 40,
>>>> +       .hsync_end = 800 + 40 + 48,
>>>> +       .htotal = 800 + 40 + 48 + 40,
>>>> +       .vdisplay = 480,
>>>> +       .vsync_start = 480 + 13,
>>>> +       .vsync_end = 480 + 13 + 3,
>>>> +       .vtotal = 480 + 13 + 3 + 29,
>>>> +};
>>>> +
>>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>>> +       .num_modes = 1,
>>>> +       .bpc = 6,
>>>> +       .size = {
>>>> +               .width = 154,
>>>> +               .height = 86,
>>>> +       },
>>>> +};
>>>
>>> I think this parallel RGB interface right? I too have same display
>>> with DSI I'm sure these setting will not useful right? do we need to
>>> write separate panel driver for that?
>>
>> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
>> connector board. The model I have is dual interface.
>
> Yes, this is what I have [1] where same strip can use for both RGB and
> MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

In theory yes. You can use RGB with Banana Pi M1+ and DSI with Banana Pi M3.
However, DSI on A83T is not supported yet, and I don't intend to spend my
time writing a driver for the MIPI DSI bridge on that panel. The bridge IC
is the one on top of the DSI FPC connector.

ChenYu

> [1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html
>
> Jagan.

Re: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

[Chen-Yu Tsai]

On Wed, May 16, 2018 at 12:20 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> On Wed, May 16, 2018 at 12:12 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> On Mon, May 14, 2018 at 11:03 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>>> On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>>> a sticker denoting the model name S070WV20-CT16.
>>>>
>>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>>> However the panel only does 262k colors.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>>  .../display/panel/bananapi,s070wv20-ct16.txt  |  7 ++++++
>>>>  drivers/gpu/drm/panel/panel-simple.c          | 25 +++++++++++++++++++
>>>>  2 files changed, 32 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> new file mode 100644
>>>> index 000000000000..2ec35ce36e9a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>> @@ -0,0 +1,7 @@
>>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>>> +
>>>> +Required properties:
>>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>>> +
>>>> +This binding is compatible with the simple-panel binding, which is specified
>>>> +in simple-panel.txt in this directory.
>>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>>>         },
>>>>  };
>>>>
>>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>>> +       .clock = 30000,
>>>> +       .hdisplay = 800,
>>>> +       .hsync_start = 800 + 40,
>>>> +       .hsync_end = 800 + 40 + 48,
>>>> +       .htotal = 800 + 40 + 48 + 40,
>>>> +       .vdisplay = 480,
>>>> +       .vsync_start = 480 + 13,
>>>> +       .vsync_end = 480 + 13 + 3,
>>>> +       .vtotal = 480 + 13 + 3 + 29,
>>>> +};
>>>> +
>>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>>> +       .modes = &bananapi_s070wv20_ct16_mode,
>>>> +       .num_modes = 1,
>>>> +       .bpc = 6,
>>>> +       .size = {
>>>> +               .width = 154,
>>>> +               .height = 86,
>>>> +       },
>>>> +};
>>>
>>> I think this parallel RGB interface right? I too have same display
>>> with DSI I'm sure these setting will not useful right? do we need to
>>> write separate panel driver for that?
>>
>> AFAIK the DSI model is an RGB panel with a MIPI DSI bridge on the
>> connector board. The model I have is dual interface.
>
> Yes, this is what I have [1] where same strip can use for both RGB and
> MIPI DSI. can bananapi,s070wv20-ct16 work for DSI interface as well?

In theory yes. You can use RGB with Banana Pi M1+ and DSI with Banana Pi M3.
However, DSI on A83T is not supported yet, and I don't intend to spend my
time writing a driver for the MIPI DSI bridge on that panel. The bridge IC
is the one on top of the DSI FPC connector.

ChenYu

> [1] https://www.aliexpress.com/item/New-Arrival-Banana-Pro-Pi-7-inch-LCD-Display-Touch-Screen-Raspberry-Pi-Car-GPS-FreeShipping/32335608836.html
>
> Jagan.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 5/6] ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0

[Chen-Yu Tsai]

On the A20, as well as many other Allwinner SoCs, the PD pingroup has
the LCD0 RGB output functions.

Add a pinmux setting for RGB888 output from LCD0, so boards and tablets
with parallel RGB LCD panels may reference it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..e06c14649d22 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -920,6 +920,17 @@
 				pins = "PI20", "PI21";
 				function = "uart7";
 			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9",
+				       "PD10", "PD11", "PD12", "PD13",
+				       "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21",
+				       "PD22", "PD23", "PD24", "PD25",
+				       "PD26", "PD27";
+				function = "lcd0";
+			};
 		};
 
 		timer@1c20c00 {
-- 
2.17.0

[PATCH 5/6] ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0

[Chen-Yu Tsai]

On the A20, as well as many other Allwinner SoCs, the PD pingroup has
the LCD0 RGB output functions.

Add a pinmux setting for RGB888 output from LCD0, so boards and tablets
with parallel RGB LCD panels may reference it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..e06c14649d22 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -920,6 +920,17 @@
 				pins = "PI20", "PI21";
 				function = "uart7";
 			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9",
+				       "PD10", "PD11", "PD12", "PD13",
+				       "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21",
+				       "PD22", "PD23", "PD24", "PD25",
+				       "PD26", "PD27";
+				function = "lcd0";
+			};
 		};
 
 		timer at 1c20c00 {
-- 
2.17.0

[PATCH 6/6] [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7" 800x480 RGB LCD panel

[Chen-Yu Tsai]

The BPI-M1+ has an FPC connector for connecting an RGB (parallel) or
LVDS LCD panel. One of the compatible panels is a 7" 800x480 RGB panel
from Bananapi. The backlight can be controlled by driving a PWM signal
from the SoC at different duty cycles. The LCD enable pin does not seem
to do anything, but it is nevertheless included for completeness. There
is also a FT5306 capacitive touchscreen controller.

This should not be confused with the other 7" LCD that is LVDS based
and has a resolution of 1024x600.

This patch enables all of the above for the BPI-M1+.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 763cb03033c4..58a923bfa6ef 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -47,6 +47,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Banana Pi BPI-M1-Plus";
@@ -71,6 +72,34 @@
 		};
 	};
 
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 20000 PWM_POLARITY_INVERTED>; /* 50 kHz */
+		enable-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "bananapi,s070wv20-ct16", "simple-panel";
+		/* This doesn't do anything for this particular panel */
+		enable-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			backlight = <&lcd_backlight>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lcd_panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -173,6 +202,20 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 7 IRQ_TYPE_EDGE_FALLING>; /* PH7 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+	};
+};
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -249,6 +292,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -278,6 +327,18 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&lcd_panel_input>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.17.0

[PATCH 6/6] [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7" 800x480 RGB LCD panel

[Chen-Yu Tsai]

The BPI-M1+ has an FPC connector for connecting an RGB (parallel) or
LVDS LCD panel. One of the compatible panels is a 7" 800x480 RGB panel
from Bananapi. The backlight can be controlled by driving a PWM signal
from the SoC at different duty cycles. The LCD enable pin does not seem
to do anything, but it is nevertheless included for completeness. There
is also a FT5306 capacitive touchscreen controller.

This should not be confused with the other 7" LCD that is LVDS based
and has a resolution of 1024x600.

This patch enables all of the above for the BPI-M1+.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../boot/dts/sun7i-a20-bananapi-m1-plus.dts   | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 763cb03033c4..58a923bfa6ef 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -47,6 +47,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Banana Pi BPI-M1-Plus";
@@ -71,6 +72,34 @@
 		};
 	};
 
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 20000 PWM_POLARITY_INVERTED>; /* 50 kHz */
+		enable-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "bananapi,s070wv20-ct16", "simple-panel";
+		/* This doesn't do anything for this particular panel */
+		enable-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+			backlight = <&lcd_backlight>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lcd_panel_input: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -173,6 +202,20 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+
+	touchscreen at 38 {
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 7 IRQ_TYPE_EDGE_FALLING>; /* PH7 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+	};
+};
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -249,6 +292,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -278,6 +327,18 @@
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint at 0 {
+		reg = <0>;
+		remote-endpoint = <&lcd_panel_input>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.17.0

Re: [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[Jagan Teki]

On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
>
> The TCON (LCD controller) found in Allwinner SoCs has hardware support
> for dithering on channel 0, the channel used to feed LCD panels. This
> series adds support for it.
>
> Patch 1 reworks the mode set function for the CPU interface to pass
> the encoder object, so it can be passed to other helper functions.
>
> Patch 2 renames the dithering related register macros to reflect the
> fact that dithering is only supported on channel 0.
>
> Patch 3 adds support for dithering on all LCD panel output types.
>
> Patch 4 adds support for Banana Pi's 7" DPI LCD panel.
>
> Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
> This change has been sent by others before.
>
> Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
> on the Banana Pi M1+. This should not be merged. I will likely rework
> this into an overlay in the future.
>
> Note that I was only able to test dithering with DPI, as I do not have
> other panel types. However the underlying concept and core code is the
> same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
> can test LVDS and Maxime can test MIPI DSI.
>
> Also it seems pwm-backlight hardware is unusable at the moment. I'm not
> sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
> manually poke the pwm registers so the LCD backlight wouldn't be
> completely black.
>
>
> Regards
> ChenYu
>
> Chen-Yu Tsai (5):
>   drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
>   drm/sun4i: tcon: Rename Dithering related register macros
>   drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
>   ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
>   [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
>     800x480 RGB LCD panel
>
> Jonathan Liu (1):
>   drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

Do you have any working branch to test this, I can't see drm probing
on linux-next, I even enabled de on dts which is missing.

Jagan.

[PATCH 0/6] drm/sun4i: Support color dithering for LCD panels

[Jagan Teki]

On Thu, Apr 19, 2018 at 3:02 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> Dithering is a method of approximating a color from a mixture of other
> colors when the required color isn't available. It reduces color
> banding artifacts that can be observed when displaying gradients
> (e.g. grayscale gradients). This may occur when the image that needs
> to be displayed is 24-bit but the LCD panel is a lower bit depth and
> does not perform dithering on its own.
>
> The TCON (LCD controller) found in Allwinner SoCs has hardware support
> for dithering on channel 0, the channel used to feed LCD panels. This
> series adds support for it.
>
> Patch 1 reworks the mode set function for the CPU interface to pass
> the encoder object, so it can be passed to other helper functions.
>
> Patch 2 renames the dithering related register macros to reflect the
> fact that dithering is only supported on channel 0.
>
> Patch 3 adds support for dithering on all LCD panel output types.
>
> Patch 4 adds support for Banana Pi's 7" DPI LCD panel.
>
> Patch 5 adds a pinmux setting for RGB888 for the Allwinner A20 SoC.
> This change has been sent by others before.
>
> Patch 6 provides an example for enabling the Banana Pi 7" DPI LCD panel
> on the Banana Pi M1+. This should not be merged. I will likely rework
> this into an overlay in the future.
>
> Note that I was only able to test dithering with DPI, as I do not have
> other panel types. However the underlying concept and core code is the
> same, as are the drm objects accessed. Nevertheless I'm hoping Jonathan
> can test LVDS and Maxime can test MIPI DSI.
>
> Also it seems pwm-backlight hardware is unusable at the moment. I'm not
> sure whether the pwm-backlight or sun4i-pwm driver is to blame. I had to
> manually poke the pwm registers so the LCD backlight wouldn't be
> completely black.
>
>
> Regards
> ChenYu
>
> Chen-Yu Tsai (5):
>   drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu
>   drm/sun4i: tcon: Rename Dithering related register macros
>   drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
>   ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0
>   [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7"
>     800x480 RGB LCD panel
>
> Jonathan Liu (1):
>   drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels

Do you have any working branch to test this, I can't see drm probing
on linux-next, I even enabled de on dts which is missing.

Jagan.