From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Christian Eggers <ceggers@arri.de>,
Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
Greg Ungerer <gerg@kernel.org>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>,
Sascha Hauer <s.hauer@pengutronix.de>, Han Xu <han.xu@nxp.com>,
Christian Hemp <C.Hemp@phytec.de>,
Boris Brezillon <bbrezillon@kernel.org>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Subject: [RFC PATCH 1/2] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
Date: Tue, 12 Oct 2021 11:02:23 +0200 [thread overview]
Message-ID: <20211012090224.4101984-1-s.riedmueller@phytec.de> (raw)
In-Reply-To: <20211011084607.27a840e0@xps13>
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 4d08e4ab5c1b..a1f7000f033e 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1034,15 +1034,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
r->clock[i] = clk;
}
- if (GPMI_IS_MX6(this))
- /*
- * Set the default value for the gpmi clock.
- *
- * If you want to use the ONFI nand which is in the
- * Synchronous Mode, you should change the clock as you need.
- */
- clk_set_rate(r->clock[0], 22000000);
-
return 0;
err_clock:
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-10-12 9:03 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 6:41 GPMI iMX6ull timeout on DMA Greg Ungerer
2019-07-29 8:36 ` Miquel Raynal
2019-07-29 8:42 ` Michael Nazzareno Trimarchi
2019-07-29 12:18 ` Greg Ungerer
2019-07-29 12:20 ` Michael Nazzareno Trimarchi
2019-07-29 12:33 ` Greg Ungerer
2019-07-29 12:47 ` Miquel Raynal
2019-07-29 12:49 ` Michael Nazzareno Trimarchi
2019-07-29 12:55 ` Miquel Raynal
2019-07-29 13:00 ` Michael Nazzareno Trimarchi
2019-07-29 13:22 ` Miquel Raynal
2019-07-29 20:00 ` Michael Nazzareno Trimarchi
2019-07-29 21:02 ` Miquel Raynal
2019-07-30 0:28 ` Greg Ungerer
2019-07-30 0:41 ` Greg Ungerer
2019-07-30 6:06 ` Greg Ungerer
2019-07-30 8:38 ` Miquel Raynal
2019-07-30 8:58 ` Boris Brezillon
2019-07-31 2:05 ` Greg Ungerer
2019-07-31 6:28 ` Boris Brezillon
2019-08-02 7:19 ` Greg Ungerer
2019-08-02 12:34 ` Greg Ungerer
2019-08-02 12:51 ` Boris Brezillon
2019-08-05 5:51 ` Greg Ungerer
2019-08-07 16:05 ` Miquel Raynal
2019-08-08 0:43 ` Greg Ungerer
2019-08-08 16:36 ` Boris Brezillon
2019-08-09 5:20 ` Greg Ungerer
2019-08-09 6:23 ` Boris Brezillon
2019-08-09 6:55 ` Greg Ungerer
2019-08-09 7:32 ` Boris Brezillon
2019-08-09 13:57 ` Greg Ungerer
2019-08-09 13:59 ` Boris Brezillon
2019-08-12 2:50 ` Greg Ungerer
2019-08-12 4:04 ` Greg Ungerer
2019-08-12 7:31 ` Boris Brezillon
2019-08-13 0:50 ` Greg Ungerer
2021-01-28 9:45 ` Michael Nazzareno Trimarchi
2021-01-28 10:26 ` Miquel Raynal
2021-01-28 10:35 ` Michael Nazzareno Trimarchi
2021-01-28 11:55 ` Michael Nazzareno Trimarchi
2021-01-29 12:43 ` Greg Ungerer
2021-01-30 9:41 ` Michael Nazzareno Trimarchi
2021-02-01 14:13 ` Miquel Raynal
2021-02-01 14:32 ` Michael Nazzareno Trimarchi
2021-02-01 15:08 ` Michael Nazzareno Trimarchi
2021-02-01 15:14 ` Miquel Raynal
2021-02-01 15:17 ` Michael Nazzareno Trimarchi
2021-10-15 20:05 ` Michael Trimarchi
2021-10-15 20:12 ` Michael Nazzareno Trimarchi
2021-10-18 7:19 ` Miquel Raynal
2021-10-18 7:33 ` Michael Nazzareno Trimarchi
2021-10-18 7:43 ` Miquel Raynal
2021-10-04 5:54 ` Christian Eggers
2021-10-04 6:27 ` Michael Nazzareno Trimarchi
2021-10-04 15:33 ` Miquel Raynal
2021-10-04 16:06 ` Han Xu
2021-10-05 6:02 ` Christian Eggers
2021-10-08 9:55 ` Christian Eggers
2021-10-08 12:08 ` Stefan Riedmüller
2021-10-08 12:27 ` Miquel Raynal
2021-10-08 13:11 ` Christian Eggers
2021-10-08 13:29 ` Miquel Raynal
2021-10-08 13:36 ` Miquel Raynal
2021-10-08 13:49 ` Christian Eggers
2021-10-08 16:07 ` Miquel Raynal
2021-10-09 5:53 ` Michael Nazzareno Trimarchi
2021-10-11 6:46 ` Miquel Raynal
2021-10-12 9:02 ` Stefan Riedmueller [this message]
2021-10-12 9:02 ` [RFC PATCH 2/2] gpmi-nand: Add ERR007117 protection for nfc_apply_timings Stefan Riedmueller
2021-10-13 5:01 ` Han Xu
2021-10-22 8:45 ` Stefan Riedmüller
2021-10-22 14:35 ` han.xu
2021-10-25 9:39 ` Stefan Riedmüller
2021-10-28 9:28 ` Stefan Riedmüller
2021-11-01 4:01 ` han.xu
2021-10-13 6:10 ` Christian Eggers
2021-10-13 6:00 ` [RFC PATCH 1/2] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6 Christian Eggers
2021-10-09 6:26 ` GPMI iMX6ull timeout on DMA Christian Eggers
2021-10-13 6:15 ` Christian Eggers
2021-10-08 13:13 ` Christian Eggers
2021-10-08 13:30 ` Miquel Raynal
2021-10-09 6:33 ` Christian Eggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211012090224.4101984-1-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=C.Hemp@phytec.de \
--cc=bbrezillon@kernel.org \
--cc=ceggers@arri.de \
--cc=gerg@kernel.org \
--cc=han.xu@nxp.com \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=miquel.raynal@bootlin.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).