[PATCH v9 00/10] Support Andes PMU extension

[PATCH v9 00/10] Support Andes PMU extension

[Yu Chien Peter Lin]

Hi All,

This patch series introduces the Andes PMU extension, which serves the
same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
is assigned to bit 18 in the custom S-mode local interrupt enable and
pending registers (slie/slip), while the interrupt cause is (256 + 18).

The series can be found on Andes Technology GitHub:
- https://github.com/andestech/linux/commits/andes-pmu-support-v9

The PMU device tree node used on AX45MP:
- https://github.com/riscv-software-src/opensbi/blob/master/docs/pmu_support.md#example-3

Locus Wei-Han Chen (1):
  riscv: andes: Support specifying symbolic firmware and hardware raw
    events

Yu Chien Peter Lin (9):
  riscv: errata: Rename defines for Andes
  irqchip/riscv-intc: Allow large non-standard interrupt number
  irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
  dt-bindings: riscv: Add Andes interrupt controller compatible string
  riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes
    INTC
  perf: RISC-V: Eliminate redundant interrupt enable/disable operations
  perf: RISC-V: Introduce Andes PMU to support perf event sampling
  dt-bindings: riscv: Add Andes PMU extension description
  riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

 .../devicetree/bindings/riscv/cpus.yaml       |   6 +-
 .../devicetree/bindings/riscv/extensions.yaml |   7 +
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi   |   4 +-
 arch/riscv/errata/andes/errata.c              |  10 +-
 arch/riscv/include/asm/errata_list.h          |  13 +-
 arch/riscv/include/asm/hwcap.h                |   1 +
 arch/riscv/include/asm/vendorid_list.h        |   2 +-
 arch/riscv/kernel/alternative.c               |   2 +-
 arch/riscv/kernel/cpufeature.c                |   1 +
 drivers/irqchip/irq-riscv-intc.c              |  82 +++++++++--
 drivers/perf/Kconfig                          |  14 ++
 drivers/perf/riscv_pmu_sbi.c                  |  37 ++++-
 include/linux/soc/andes/irq.h                 |  18 +++
 .../arch/riscv/andes/ax45/firmware.json       |  68 ++++++++++
 .../arch/riscv/andes/ax45/instructions.json   | 127 ++++++++++++++++++
 .../arch/riscv/andes/ax45/memory.json         |  57 ++++++++
 .../arch/riscv/andes/ax45/microarch.json      |  77 +++++++++++
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |   1 +
 18 files changed, 488 insertions(+), 39 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json

-- 
2.34.1

[PATCH v9 01/10] riscv: errata: Rename defines for Andes

[Yu Chien Peter Lin]

Use "ANDES" rather than "ANDESTECH" to unify the naming
convention with directory, file names, Kconfig options
and other definitions.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - No change
Changes v2 -> v3:
  - Rewrite commit message (suggested by Conor)
Changes v3 -> v4:
  - Include Conor's Acked-by tag
Changes v4 -> v5:
  - Include Prabhakar's RB tag
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 arch/riscv/errata/andes/errata.c       | 10 +++++-----
 arch/riscv/include/asm/errata_list.h   |  4 ++--
 arch/riscv/include/asm/vendorid_list.h |  2 +-
 arch/riscv/kernel/alternative.c        |  2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/errata/andes/errata.c b/arch/riscv/errata/andes/errata.c
index 17a904869724..f2708a9494a1 100644
--- a/arch/riscv/errata/andes/errata.c
+++ b/arch/riscv/errata/andes/errata.c
@@ -18,9 +18,9 @@
 #include <asm/sbi.h>
 #include <asm/vendorid_list.h>
 
-#define ANDESTECH_AX45MP_MARCHID	0x8000000000008a45UL
-#define ANDESTECH_AX45MP_MIMPID		0x500UL
-#define ANDESTECH_SBI_EXT_ANDES		0x0900031E
+#define ANDES_AX45MP_MARCHID		0x8000000000008a45UL
+#define ANDES_AX45MP_MIMPID		0x500UL
+#define ANDES_SBI_EXT_ANDES		0x0900031E
 
 #define ANDES_SBI_EXT_IOCP_SW_WORKAROUND	1
 
@@ -32,7 +32,7 @@ static long ax45mp_iocp_sw_workaround(void)
 	 * ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI EXT checks if the IOCP is missing and
 	 * cache is controllable only then CMO will be applied to the platform.
 	 */
-	ret = sbi_ecall(ANDESTECH_SBI_EXT_ANDES, ANDES_SBI_EXT_IOCP_SW_WORKAROUND,
+	ret = sbi_ecall(ANDES_SBI_EXT_ANDES, ANDES_SBI_EXT_IOCP_SW_WORKAROUND,
 			0, 0, 0, 0, 0, 0);
 
 	return ret.error ? 0 : ret.value;
@@ -50,7 +50,7 @@ static void errata_probe_iocp(unsigned int stage, unsigned long arch_id, unsigne
 
 	done = true;
 
-	if (arch_id != ANDESTECH_AX45MP_MARCHID || impid != ANDESTECH_AX45MP_MIMPID)
+	if (arch_id != ANDES_AX45MP_MARCHID || impid != ANDES_AX45MP_MIMPID)
 		return;
 
 	if (!ax45mp_iocp_sw_workaround())
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index ea33288f8a25..96025eec5631 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -12,8 +12,8 @@
 #include <asm/vendorid_list.h>
 
 #ifdef CONFIG_ERRATA_ANDES
-#define ERRATA_ANDESTECH_NO_IOCP	0
-#define ERRATA_ANDESTECH_NUMBER		1
+#define ERRATA_ANDES_NO_IOCP 0
+#define ERRATA_ANDES_NUMBER 1
 #endif
 
 #ifdef CONFIG_ERRATA_SIFIVE
diff --git a/arch/riscv/include/asm/vendorid_list.h b/arch/riscv/include/asm/vendorid_list.h
index e55407ace0c3..2f2bb0c84f9a 100644
--- a/arch/riscv/include/asm/vendorid_list.h
+++ b/arch/riscv/include/asm/vendorid_list.h
@@ -5,7 +5,7 @@
 #ifndef ASM_VENDOR_LIST_H
 #define ASM_VENDOR_LIST_H
 
-#define ANDESTECH_VENDOR_ID	0x31e
+#define ANDES_VENDOR_ID		0x31e
 #define SIFIVE_VENDOR_ID	0x489
 #define THEAD_VENDOR_ID		0x5b7
 
diff --git a/arch/riscv/kernel/alternative.c b/arch/riscv/kernel/alternative.c
index 319a1da0358b..0128b161bfda 100644
--- a/arch/riscv/kernel/alternative.c
+++ b/arch/riscv/kernel/alternative.c
@@ -43,7 +43,7 @@ static void riscv_fill_cpu_mfr_info(struct cpu_manufacturer_info_t *cpu_mfr_info
 
 	switch (cpu_mfr_info->vendor_id) {
 #ifdef CONFIG_ERRATA_ANDES
-	case ANDESTECH_VENDOR_ID:
+	case ANDES_VENDOR_ID:
 		cpu_mfr_info->patch_func = andes_errata_patch_func;
 		break;
 #endif
-- 
2.34.1

[PATCH v9 02/10] irqchip/riscv-intc: Allow large non-standard interrupt number

[Yu Chien Peter Lin]

Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.

To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
---
Changes v1 -> v2:
  - Fixed irq mapping failure checking (suggested by Clément and Anup)
Changes v2 -> v3:
  - No change
Changes v3 -> v4: (Suggested by Thomas [1])
  - Use pr_warn_ratelimited instead
  - Fix coding style and commit message
Changes v4 -> v5: (Suggested by Thomas)
  - Fix commit message
Changes v5 -> v6: (Suggested by Anup [2])
  - Add riscv_intc_* global variables for checking the range of valid
    interrupt number in riscv_intc_domain_alloc()
  - Advertise the number of interrupts allowed
Changes v6 -> v7:
  - No functional change
Changes v7 -> v8:
  - Include Reviewed-by tags from Anup and Atish
Changes v8 -> v9 (Suggested by Thomas [3]):
  - Fix coding style 
  - Update hwirq range checks
  - Update riscv_intc_* global variables initialization

[1] https://patchwork.kernel.org/project/linux-riscv/patch/20231023004100.2663486-3-peterlin@andestech.com/#25573085
[2] https://patchwork.kernel.org/project/linux-riscv/patch/20231213070301.1684751-3-peterlin@andestech.com/#25636589
[3] https://patchwork.kernel.org/project/linux-riscv/patch/20240129092553.2058043-3-peterlin@andestech.com/#25710584
---
 drivers/irqchip/irq-riscv-intc.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index e8d01b14ccdd..684875c39728 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -19,15 +19,16 @@
 #include <linux/smp.h>
 
 static struct irq_domain *intc_domain;
+static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_base __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_nr_irqs __ro_after_init;
 
 static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 {
 	unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
 
-	if (unlikely(cause >= BITS_PER_LONG))
-		panic("unexpected interrupt cause");
-
-	generic_handle_domain_irq(intc_domain, cause);
+	if (generic_handle_domain_irq(intc_domain, cause))
+		pr_warn_ratelimited("Failed to handle interrupt (cause: %ld)\n", cause);
 }
 
 /*
@@ -93,6 +94,14 @@ static int riscv_intc_domain_alloc(struct irq_domain *domain,
 	if (ret)
 		return ret;
 
+	/*
+	 * Only allow hwirq for which we have corresponding standard or
+	 * custom interrupt enable register.
+	 */
+	if ((hwirq >= riscv_intc_nr_irqs && hwirq < riscv_intc_custom_base) ||
+	    (hwirq >= riscv_intc_custom_base + riscv_intc_custom_nr_irqs))
+		return -EINVAL;
+
 	for (i = 0; i < nr_irqs; i++) {
 		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
 		if (ret)
@@ -117,8 +126,7 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
-					       &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -132,7 +140,11 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped\n", riscv_intc_nr_irqs);
+	if (riscv_intc_custom_nr_irqs) {
+		pr_info("%d custom local interrupts mapped\n",
+			riscv_intc_custom_nr_irqs);
+	}
 
 	return 0;
 }
-- 
2.34.1

Re: [PATCH v9 02/10] irqchip/riscv-intc: Allow large non-standard interrupt number

[Thomas Gleixner]

On Thu, Feb 22 2024 at 16:39, Yu Chien Peter Lin wrote:
> Currently, the implementation of the RISC-V INTC driver uses the
> interrupt cause as the hardware interrupt number, with a maximum of
> 64 interrupts. However, the platform can expand the interrupt number
> further for custom local interrupts.
>
> To fully utilize the available local interrupt sources, switch
> to using irq_domain_create_tree() that creates the radix tree
> map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
> and riscv_intc_custom_nr_irqs) to determine the valid range of local
> interrupt number (hwirq).
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Randolph <randolph@andestech.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Reviewed-by: Atish Patra <atishp@rivosinc.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[tip: irq/msi] irqchip/riscv-intc: Allow large non-standard interrupt number

[tip-bot2 for Yu Chien Peter Lin]

The following commit has been merged into the irq/msi branch of tip:

Commit-ID:     96303bcb401c21dc1426d8d9bb1fc74aae5c02a9
Gitweb:        https://git.kernel.org/tip/96303bcb401c21dc1426d8d9bb1fc74aae5c02a9
Author:        Yu Chien Peter Lin <peterlin@andestech.com>
AuthorDate:    Thu, 22 Feb 2024 16:39:38 +08:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 23 Feb 2024 09:57:42 +01:00

irqchip/riscv-intc: Allow large non-standard interrupt number

Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.

To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-3-peterlin@andestech.com

---
 drivers/irqchip/irq-riscv-intc.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index e8d01b1..684875c 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -19,15 +19,16 @@
 #include <linux/smp.h>
 
 static struct irq_domain *intc_domain;
+static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_base __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_nr_irqs __ro_after_init;
 
 static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 {
 	unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
 
-	if (unlikely(cause >= BITS_PER_LONG))
-		panic("unexpected interrupt cause");
-
-	generic_handle_domain_irq(intc_domain, cause);
+	if (generic_handle_domain_irq(intc_domain, cause))
+		pr_warn_ratelimited("Failed to handle interrupt (cause: %ld)\n", cause);
 }
 
 /*
@@ -93,6 +94,14 @@ static int riscv_intc_domain_alloc(struct irq_domain *domain,
 	if (ret)
 		return ret;
 
+	/*
+	 * Only allow hwirq for which we have corresponding standard or
+	 * custom interrupt enable register.
+	 */
+	if ((hwirq >= riscv_intc_nr_irqs && hwirq < riscv_intc_custom_base) ||
+	    (hwirq >= riscv_intc_custom_base + riscv_intc_custom_nr_irqs))
+		return -EINVAL;
+
 	for (i = 0; i < nr_irqs; i++) {
 		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
 		if (ret)
@@ -117,8 +126,7 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
-					       &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -132,7 +140,11 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped\n", riscv_intc_nr_irqs);
+	if (riscv_intc_custom_nr_irqs) {
+		pr_info("%d custom local interrupts mapped\n",
+			riscv_intc_custom_nr_irqs);
+	}
 
 	return 0;
 }

[PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Yu Chien Peter Lin]

Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Return -ENXIO if no valid compatible INTC found
  - Allow falling back to generic RISC-V INTC
Changes v3 -> v4: (Suggested by Thomas [1])
  - Add comment to andes irq chip function
  - Refine code flow to share with generic RISC-V INTC and ACPI
  - Move Andes specific definitions to include/linux/soc/andes/irq.h
Changes v4 -> v5: (Suggested by Thomas)
  - Fix commit message
  - Subtract ANDES_SLI_CAUSE_BASE from d->hwirq to calculate the value of mask
  - Do not set chip_data to the chip itself with irq_domain_set_info()
  - Follow reverse fir tree order variable declarations
Changes v5 -> v6:
  - To follow the naming on datasheet, rename ANDES_RV_IRQ_PMU to ANDES_RV_IRQ_PMOVI
  - Initialize the riscv_intc_* global variables for Andes INTC (Suggested by Anup)
  - Use BITS_PER_LONG to compute the bit mask of SIE/SLIE as they are 64-bit registers (32-bit for RV32)
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - Include Reviewed-by tags from Anup
Changes v8 -> v9:
  - No functional change

[1] https://patchwork.kernel.org/project/linux-riscv/patch/20231019135723.3657156-1-peterlin@andestech.com/
---
 drivers/irqchip/irq-riscv-intc.c | 58 ++++++++++++++++++++++++++++----
 include/linux/soc/andes/irq.h    | 18 ++++++++++
 2 files changed, 69 insertions(+), 7 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 684875c39728..0cd6b48a5dbf 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/soc/andes/irq.h>
 
 static struct irq_domain *intc_domain;
 static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
@@ -48,6 +49,31 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
+static void andes_intc_irq_mask(struct irq_data *d)
+{
+	/*
+	 * Andes specific S-mode local interrupt causes (hwirq)
+	 * are defined as (256 + n) and controlled by n-th bit
+	 * of SLIE.
+	 */
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_clear(CSR_IE, mask);
+	else
+		csr_clear(ANDES_CSR_SLIE, mask);
+}
+
+static void andes_intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_set(CSR_IE, mask);
+	else
+		csr_set(ANDES_CSR_SLIE, mask);
+}
+
 static void riscv_intc_irq_eoi(struct irq_data *d)
 {
 	/*
@@ -71,12 +97,21 @@ static struct irq_chip riscv_intc_chip = {
 	.irq_eoi = riscv_intc_irq_eoi,
 };
 
+static struct irq_chip andes_intc_chip = {
+	.name		= "RISC-V INTC",
+	.irq_mask	= andes_intc_irq_mask,
+	.irq_unmask	= andes_intc_irq_unmask,
+	.irq_eoi	= riscv_intc_irq_eoi,
+};
+
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 				 irq_hw_number_t hwirq)
 {
+	struct irq_chip *chip = d->host_data;
+
 	irq_set_percpu_devid(irq);
-	irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data,
-			    handle_percpu_devid_irq, NULL, NULL);
+	irq_domain_set_info(d, irq, hwirq, chip, NULL, handle_percpu_devid_irq,
+			    NULL, NULL);
 
 	return 0;
 }
@@ -122,11 +157,12 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
-static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+static int __init riscv_intc_init_common(struct fwnode_handle *fn,
+					 struct irq_chip *chip)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, chip);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -152,8 +188,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
-	int rc;
+	struct irq_chip *chip = &riscv_intc_chip;
 	unsigned long hartid;
+	int rc;
 
 	rc = riscv_of_parent_hartid(node, &hartid);
 	if (rc < 0) {
@@ -178,10 +215,17 @@ static int __init riscv_intc_init(struct device_node *node,
 		return 0;
 	}
 
-	return riscv_intc_init_common(of_node_to_fwnode(node));
+	if (of_device_is_compatible(node, "andestech,cpu-intc")) {
+		riscv_intc_custom_base = ANDES_SLI_CAUSE_BASE;
+		riscv_intc_custom_nr_irqs = ANDES_RV_IRQ_LAST;
+		chip = &andes_intc_chip;
+	}
+
+	return riscv_intc_init_common(of_node_to_fwnode(node), chip);
 }
 
 IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_DECLARE(andes, "andestech,cpu-intc", riscv_intc_init);
 
 #ifdef CONFIG_ACPI
 
@@ -208,7 +252,7 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 		return -ENOMEM;
 	}
 
-	return riscv_intc_init_common(fn);
+	return riscv_intc_init_common(fn, &riscv_intc_chip);
 }
 
 IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
diff --git a/include/linux/soc/andes/irq.h b/include/linux/soc/andes/irq.h
new file mode 100644
index 000000000000..edc3182d6e66
--- /dev/null
+++ b/include/linux/soc/andes/irq.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Andes Technology Corporation
+ */
+#ifndef __ANDES_IRQ_H
+#define __ANDES_IRQ_H
+
+/* Andes PMU irq number */
+#define ANDES_RV_IRQ_PMOVI		18
+#define ANDES_RV_IRQ_LAST		ANDES_RV_IRQ_PMOVI
+#define ANDES_SLI_CAUSE_BASE		256
+
+/* Andes PMU related registers */
+#define ANDES_CSR_SLIE			0x9c4
+#define ANDES_CSR_SLIP			0x9c5
+#define ANDES_CSR_SCOUNTEROF		0x9d4
+
+#endif /* __ANDES_IRQ_H */
-- 
2.34.1

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Thomas Gleixner]

On Thu, Feb 22 2024 at 16:39, Yu Chien Peter Lin wrote:
> Add support for the Andes hart-level interrupt controller. This
> controller provides interrupt mask/unmask functions to access the
> custom register (SLIE) where the non-standard S-mode local interrupt
> enable bits are located. The base of custom interrupt number is set
> to 256.
>
> To share the riscv_intc_domain_map() with the generic RISC-V INTC and
> ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
> passed to the irq_domain_set_info() as a private data.
>
> Andes hart-level interrupt controller requires the "andestech,cpu-intc"
> compatible string to be present in interrupt-controller of cpu node to
> enable the use of custom local interrupt source.
> e.g.,
>
>   cpu0: cpu@0 {
>       compatible = "andestech,ax45mp", "riscv";
>       ...
>       cpu0-intc: interrupt-controller {
>           #interrupt-cells = <0x01>;
>           compatible = "andestech,cpu-intc", "riscv,cpu-intc";
>           interrupt-controller;
>       };
>   };
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Randolph <randolph@andestech.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Palmer, feel free to take this through the riscv tree. I have no other
changes pending against that driver.

Thanks,

        tglx

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Thomas Gleixner]

On Thu, Feb 22 2024 at 22:36, Thomas Gleixner wrote:
> Palmer, feel free to take this through the riscv tree. I have no other
> changes pending against that driver.

Aargh. Spoken too early. This conflicts with Anups AIA series.

  https://lore.kernel.org/all/20240222094006.1030709-1-apatel@ventanamicro.com

So I rather take the pile through my tree and deal with the conflicts
localy than inflicting it on next.

Palmer?

Thanks,

        tglx

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Thomas Gleixner]

On Fri, Feb 23 2024 at 09:49, Thomas Gleixner wrote:
> On Thu, Feb 22 2024 at 22:36, Thomas Gleixner wrote:
>> Palmer, feel free to take this through the riscv tree. I have no other
>> changes pending against that driver.
>
> Aargh. Spoken too early. This conflicts with Anups AIA series.
>
>   https://lore.kernel.org/all/20240222094006.1030709-1-apatel@ventanamicro.com
>
> So I rather take the pile through my tree and deal with the conflicts
> localy than inflicting it on next.

> Palmer?

Nah. I just apply the two intc patches localy and give you a tag to pull
from so we carry both the same commits. Then I can deal with the
conflicts on my side trivially.

Thanks,

        tglx

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Thomas Gleixner]

On Fri, Feb 23 2024 at 09:54, Thomas Gleixner wrote:
> On Fri, Feb 23 2024 at 09:49, Thomas Gleixner wrote:
>> On Thu, Feb 22 2024 at 22:36, Thomas Gleixner wrote:
>>> Palmer, feel free to take this through the riscv tree. I have no other
>>> changes pending against that driver.
>>
>> Aargh. Spoken too early. This conflicts with Anups AIA series.
>>
>>   https://lore.kernel.org/all/20240222094006.1030709-1-apatel@ventanamicro.com
>>
>> So I rather take the pile through my tree and deal with the conflicts
>> localy than inflicting it on next.
>
>> Palmer?
>
> Nah. I just apply the two intc patches localy and give you a tag to pull
> from so we carry both the same commits. Then I can deal with the
> conflicts on my side trivially.

Here you go:

  git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-for-riscv-02-23-24

Contains:

  f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller")
  96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")

on top of v6.8-rc1

Thanks,

        tglx

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Palmer Dabbelt]

On Fri, 23 Feb 2024 01:06:44 PST (-0800), tglx@linutronix.de wrote:
> On Fri, Feb 23 2024 at 09:54, Thomas Gleixner wrote:
>> On Fri, Feb 23 2024 at 09:49, Thomas Gleixner wrote:
>>> On Thu, Feb 22 2024 at 22:36, Thomas Gleixner wrote:
>>>> Palmer, feel free to take this through the riscv tree. I have no other
>>>> changes pending against that driver.
>>>
>>> Aargh. Spoken too early. This conflicts with Anups AIA series.
>>>
>>>   https://lore.kernel.org/all/20240222094006.1030709-1-apatel@ventanamicro.com
>>>
>>> So I rather take the pile through my tree and deal with the conflicts
>>> localy than inflicting it on next.
>>
>>> Palmer?
>>
>> Nah. I just apply the two intc patches localy and give you a tag to pull
>> from so we carry both the same commits. Then I can deal with the
>> conflicts on my side trivially.
>
> Here you go:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-for-riscv-02-23-24
>
> Contains:
>
>   f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller")
>   96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")
>
> on top of v6.8-rc1

Sorry I missed this.  I just merged this into my testing tree, it might 
take a bit to show up because I've managed to break my VPN so I can't 
poke the tester box right now...

>
> Thanks,
>
>         tglx

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[Thomas Gleixner]

On Tue, Mar 12 2024 at 07:23, Palmer Dabbelt wrote:
> On Fri, 23 Feb 2024 01:06:44 PST (-0800), tglx@linutronix.de wrote:
>> Contains:
>>
>>   f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller")
>>   96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")
>>
>> on top of v6.8-rc1
>
> Sorry I missed this.  I just merged this into my testing tree, it might 
> take a bit to show up because I've managed to break my VPN so I can't 
> poke the tester box right now...

Alternatively you can just rebase on Linus tree. The interrupt changes
are already merged.

[tip: irq/msi] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

[tip-bot2 for Yu Chien Peter Lin]

The following commit has been merged into the irq/msi branch of tip:

Commit-ID:     f4cc33e78ba8624a79ba8dea98ce5c85aa9ca33c
Gitweb:        https://git.kernel.org/tip/f4cc33e78ba8624a79ba8dea98ce5c85aa9ca33c
Author:        Yu Chien Peter Lin <peterlin@andestech.com>
AuthorDate:    Thu, 22 Feb 2024 16:39:39 +08:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 23 Feb 2024 09:57:42 +01:00

irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240222083946.3977135-4-peterlin@andestech.com

---
 drivers/irqchip/irq-riscv-intc.c | 58 +++++++++++++++++++++++++++----
 include/linux/soc/andes/irq.h    | 18 ++++++++++-
 2 files changed, 69 insertions(+), 7 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 684875c..0cd6b48 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/soc/andes/irq.h>
 
 static struct irq_domain *intc_domain;
 static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
@@ -48,6 +49,31 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
+static void andes_intc_irq_mask(struct irq_data *d)
+{
+	/*
+	 * Andes specific S-mode local interrupt causes (hwirq)
+	 * are defined as (256 + n) and controlled by n-th bit
+	 * of SLIE.
+	 */
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_clear(CSR_IE, mask);
+	else
+		csr_clear(ANDES_CSR_SLIE, mask);
+}
+
+static void andes_intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_set(CSR_IE, mask);
+	else
+		csr_set(ANDES_CSR_SLIE, mask);
+}
+
 static void riscv_intc_irq_eoi(struct irq_data *d)
 {
 	/*
@@ -71,12 +97,21 @@ static struct irq_chip riscv_intc_chip = {
 	.irq_eoi = riscv_intc_irq_eoi,
 };
 
+static struct irq_chip andes_intc_chip = {
+	.name		= "RISC-V INTC",
+	.irq_mask	= andes_intc_irq_mask,
+	.irq_unmask	= andes_intc_irq_unmask,
+	.irq_eoi	= riscv_intc_irq_eoi,
+};
+
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 				 irq_hw_number_t hwirq)
 {
+	struct irq_chip *chip = d->host_data;
+
 	irq_set_percpu_devid(irq);
-	irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data,
-			    handle_percpu_devid_irq, NULL, NULL);
+	irq_domain_set_info(d, irq, hwirq, chip, NULL, handle_percpu_devid_irq,
+			    NULL, NULL);
 
 	return 0;
 }
@@ -122,11 +157,12 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
-static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+static int __init riscv_intc_init_common(struct fwnode_handle *fn,
+					 struct irq_chip *chip)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, chip);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -152,8 +188,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
-	int rc;
+	struct irq_chip *chip = &riscv_intc_chip;
 	unsigned long hartid;
+	int rc;
 
 	rc = riscv_of_parent_hartid(node, &hartid);
 	if (rc < 0) {
@@ -178,10 +215,17 @@ static int __init riscv_intc_init(struct device_node *node,
 		return 0;
 	}
 
-	return riscv_intc_init_common(of_node_to_fwnode(node));
+	if (of_device_is_compatible(node, "andestech,cpu-intc")) {
+		riscv_intc_custom_base = ANDES_SLI_CAUSE_BASE;
+		riscv_intc_custom_nr_irqs = ANDES_RV_IRQ_LAST;
+		chip = &andes_intc_chip;
+	}
+
+	return riscv_intc_init_common(of_node_to_fwnode(node), chip);
 }
 
 IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_DECLARE(andes, "andestech,cpu-intc", riscv_intc_init);
 
 #ifdef CONFIG_ACPI
 
@@ -208,7 +252,7 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 		return -ENOMEM;
 	}
 
-	return riscv_intc_init_common(fn);
+	return riscv_intc_init_common(fn, &riscv_intc_chip);
 }
 
 IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
diff --git a/include/linux/soc/andes/irq.h b/include/linux/soc/andes/irq.h
new file mode 100644
index 0000000..edc3182
--- /dev/null
+++ b/include/linux/soc/andes/irq.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Andes Technology Corporation
+ */
+#ifndef __ANDES_IRQ_H
+#define __ANDES_IRQ_H
+
+/* Andes PMU irq number */
+#define ANDES_RV_IRQ_PMOVI		18
+#define ANDES_RV_IRQ_LAST		ANDES_RV_IRQ_PMOVI
+#define ANDES_SLI_CAUSE_BASE		256
+
+/* Andes PMU related registers */
+#define ANDES_CSR_SLIE			0x9c4
+#define ANDES_CSR_SLIP			0x9c5
+#define ANDES_CSR_SCOUNTEROF		0x9d4
+
+#endif /* __ANDES_IRQ_H */

[PATCH v9 04/10] dt-bindings: riscv: Add Andes interrupt controller compatible string

[Yu Chien Peter Lin]

Add "andestech,cpu-intc" compatible string to indicate that
Andes specific local interrupt is supported on the core,
e.g. AX45MP cores have 3 types of non-standard local interrupt
which can be handled in supervisor mode:

- Slave port ECC error interrupt
- Bus write transaction error interrupt
- Performance monitor overflow interrupt

These interrupts are enabled/disabled via a custom register
SLIE instead of the standard interrupt enable register SIE.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Updated commit message
  - Fixed possible compatibles for Andes INTC
Changes v3 -> v4:
  - Add const entry instead of enum (Suggested by Conor)
Changes v4 -> v5:
  - Include Conor's Acked-by
  - Include Prabhakar's Reviewed-by
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 9d8670c00e3b..6ccd75cbbc59 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -106,7 +106,11 @@ properties:
         const: 1
 
       compatible:
-        const: riscv,cpu-intc
+        oneOf:
+          - items:
+              - const: andestech,cpu-intc
+              - const: riscv,cpu-intc
+          - const: riscv,cpu-intc
 
       interrupt-controller: true
 
-- 
2.34.1

[PATCH v9 05/10] riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC

[Yu Chien Peter Lin]

The Andes hart-level interrupt controller (Andes INTC) allows AX45MP
cores to handle custom local interrupts, such as the performance
counter overflow interrupt.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Fixed possible compatibles for Andes INTC
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - Include Geert's Reviewed-by
  - Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index a92cfcfc021b..099f3df75b42 100644
--- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -39,7 +39,7 @@ cpu0: cpu@0 {
 
 			cpu0_intc: interrupt-controller {
 				#interrupt-cells = <1>;
-				compatible = "riscv,cpu-intc";
+				compatible = "andestech,cpu-intc", "riscv,cpu-intc";
 				interrupt-controller;
 			};
 		};
-- 
2.34.1

Re: [PATCH v9 05/10] riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC

[Geert Uytterhoeven]

On Thu, Feb 22, 2024 at 9:40 AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
> The Andes hart-level interrupt controller (Andes INTC) allows AX45MP
> cores to handle custom local interrupts, such as the performance
> counter overflow interrupt.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> Changes v1 -> v2:
>   - New patch
> Changes v2 -> v3:
>   - Fixed possible compatibles for Andes INTC
> Changes v3 -> v4:
>   - No change
> Changes v4 -> v5:
>   - Include Geert's Reviewed-by
>   - Include Prabhakar's Reviewed/Tested-by
> Changes v5 -> v6:
>   - No change
> Changes v6 -> v7:
>   - No change
> Changes v7 -> v8:
>   - No change
> Changes v8 -> v9:
>   - No change

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
so Palmer can pick it up with the rest of the series
(the Renesas tree imerge window for v6.9 has closed)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v9 06/10] perf: RISC-V: Eliminate redundant interrupt enable/disable operations

[Yu Chien Peter Lin]

The interrupt enable/disable operations are already performed by the
IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during
enable_percpu_irq()/disable_percpu_irq(). It can be done only once.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
---
This patch allows us to drop unnecessary ALT_SBI_PMU_OVF_{DISABLE,ENABLE}
in the initial PATCH3 [1].

[1] https://patchwork.kernel.org/project/linux-riscv/patch/20230907021635.1002738-4-peterlin@andestech.com/

Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - No change
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - No change
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - Include Reviewed-by tags from Atish
Changes v8 -> v9:
  - No change
---
 drivers/perf/riscv_pmu_sbi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 16acd4dcdb96..2edbc37abadf 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -781,7 +781,6 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 	if (riscv_pmu_use_irq) {
 		cpu_hw_evt->irq = riscv_pmu_irq;
 		csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
-		csr_set(CSR_IE, BIT(riscv_pmu_irq_num));
 		enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
 	}
 
@@ -792,7 +791,6 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
 {
 	if (riscv_pmu_use_irq) {
 		disable_percpu_irq(riscv_pmu_irq);
-		csr_clear(CSR_IE, BIT(riscv_pmu_irq_num));
 	}
 
 	/* Disable all counters access for user mode now */
-- 
2.34.1

[PATCH v9 07/10] perf: RISC-V: Introduce Andes PMU to support perf event sampling

[Yu Chien Peter Lin]

Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.

To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com>
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Reordered list in riscv_isa_ext[]
  - Removed mvendorid check in pmu_sbi_setup_irqs()
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - Let ANDES_CUSTOM_PMU depend on ARCH_RENESAS
  - Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 arch/riscv/include/asm/errata_list.h |  9 -------
 arch/riscv/include/asm/hwcap.h       |  1 +
 arch/riscv/kernel/cpufeature.c       |  1 +
 drivers/perf/Kconfig                 | 14 +++++++++++
 drivers/perf/riscv_pmu_sbi.c         | 35 +++++++++++++++++++++++++---
 5 files changed, 48 insertions(+), 12 deletions(-)

diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 96025eec5631..1f2dbfb8a8bf 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -112,15 +112,6 @@ asm volatile(ALTERNATIVE(						\
 #define THEAD_C9XX_RV_IRQ_PMU			17
 #define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
 
-#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
-asm volatile(ALTERNATIVE(						\
-	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
-	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
-		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
-		CONFIG_ERRATA_THEAD_PMU)				\
-	: "=r" (__ovl) :						\
-	: "memory")
-
 #endif /* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
index 5340f818746b..bae7eac76c18 100644
--- a/arch/riscv/include/asm/hwcap.h
+++ b/arch/riscv/include/asm/hwcap.h
@@ -80,6 +80,7 @@
 #define RISCV_ISA_EXT_ZFA		71
 #define RISCV_ISA_EXT_ZTSO		72
 #define RISCV_ISA_EXT_ZACAS		73
+#define RISCV_ISA_EXT_XANDESPMU		74
 
 #define RISCV_ISA_EXT_MAX		128
 #define RISCV_ISA_EXT_INVALID		U32_MAX
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index 89920f84d0a3..0c7688fa8376 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -307,6 +307,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),
 	__RISCV_ISA_EXT_DATA(svnapot, RISCV_ISA_EXT_SVNAPOT),
 	__RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
+	__RISCV_ISA_EXT_DATA(xandespmu, RISCV_ISA_EXT_XANDESPMU),
 };
 
 const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index ec6e0d9194a1..564e813d8c69 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -86,6 +86,20 @@ config RISCV_PMU_SBI
 	  full perf feature support i.e. counter overflow, privilege mode
 	  filtering, counter configuration.
 
+config ANDES_CUSTOM_PMU
+	bool "Andes custom PMU support"
+	depends on ARCH_RENESAS && RISCV_ALTERNATIVE && RISCV_PMU_SBI
+	default y
+	help
+	  The Andes cores implement the PMU overflow extension very
+	  similar to the standard Sscofpmf and Smcntrpmf extension.
+
+	  This will patch the overflow and pending CSRs and handle the
+	  non-standard behaviour via the regular SBI PMU driver and
+	  interface.
+
+	  If you don't know what to do here, say "Y".
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 2edbc37abadf..bbd6fe021b3a 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -19,11 +19,33 @@
 #include <linux/of.h>
 #include <linux/cpu_pm.h>
 #include <linux/sched/clock.h>
+#include <linux/soc/andes/irq.h>
 
 #include <asm/errata_list.h>
 #include <asm/sbi.h>
 #include <asm/cpufeature.h>
 
+#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
+asm volatile(ALTERNATIVE_2(						\
+	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
+	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
+		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
+		CONFIG_ERRATA_THEAD_PMU,				\
+	"csrr %0, " __stringify(ANDES_CSR_SCOUNTEROF),			\
+		0, RISCV_ISA_EXT_XANDESPMU,				\
+		CONFIG_ANDES_CUSTOM_PMU)				\
+	: "=r" (__ovl) :						\
+	: "memory")
+
+#define ALT_SBI_PMU_OVF_CLEAR_PENDING(__irq_mask)			\
+asm volatile(ALTERNATIVE(						\
+	"csrc " __stringify(CSR_IP) ", %0\n\t",				\
+	"csrc " __stringify(ANDES_CSR_SLIP) ", %0\n\t",			\
+		0, RISCV_ISA_EXT_XANDESPMU,				\
+		CONFIG_ANDES_CUSTOM_PMU)				\
+	: : "r"(__irq_mask)						\
+	: "memory")
+
 #define SYSCTL_NO_USER_ACCESS	0
 #define SYSCTL_USER_ACCESS	1
 #define SYSCTL_LEGACY		2
@@ -61,6 +83,7 @@ static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
 static union sbi_pmu_ctr_info *pmu_ctr_list;
 static bool riscv_pmu_use_irq;
 static unsigned int riscv_pmu_irq_num;
+static unsigned int riscv_pmu_irq_mask;
 static unsigned int riscv_pmu_irq;
 
 /* Cache the available counters in a bitmask */
@@ -694,7 +717,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 
 	event = cpu_hw_evt->events[fidx];
 	if (!event) {
-		csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
+		ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 		return IRQ_NONE;
 	}
 
@@ -708,7 +731,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 	 * Overflow interrupt pending bit should only be cleared after stopping
 	 * all the counters to avoid any race condition.
 	 */
-	csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
+	ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 
 	/* No overflow bit is set */
 	if (!overflow)
@@ -780,7 +803,7 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 
 	if (riscv_pmu_use_irq) {
 		cpu_hw_evt->irq = riscv_pmu_irq;
-		csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
+		ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 		enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
 	}
 
@@ -814,8 +837,14 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 		   riscv_cached_mimpid(0) == 0) {
 		riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU;
 		riscv_pmu_use_irq = true;
+	} else if (riscv_isa_extension_available(NULL, XANDESPMU) &&
+		   IS_ENABLED(CONFIG_ANDES_CUSTOM_PMU)) {
+		riscv_pmu_irq_num = ANDES_SLI_CAUSE_BASE + ANDES_RV_IRQ_PMOVI;
+		riscv_pmu_use_irq = true;
 	}
 
+	riscv_pmu_irq_mask = BIT(riscv_pmu_irq_num % BITS_PER_LONG);
+
 	if (!riscv_pmu_use_irq)
 		return -EOPNOTSUPP;
 
-- 
2.34.1

[PATCH v9 08/10] dt-bindings: riscv: Add Andes PMU extension description

[Yu Chien Peter Lin]

Document the ISA string for Andes Technology performance monitor
extension which provides counter overflow interrupt and mode
filtering mechanisms.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - Include Conor's Acked-by
Changes v4 -> v5:
  - Include Prabhakar's Reviewed-by
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 Documentation/devicetree/bindings/riscv/extensions.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
index 63d81dc895e5..468c646247aa 100644
--- a/Documentation/devicetree/bindings/riscv/extensions.yaml
+++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -477,5 +477,12 @@ properties:
             latency, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: xandespmu
+          description:
+            The Andes Technology performance monitor extension for counter overflow
+            and privilege mode filtering. For more details, see Counter Related
+            Registers in the AX45MP datasheet.
+            https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+
 additionalProperties: true
 ...
-- 
2.34.1

[PATCH v9 09/10] riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

[Yu Chien Peter Lin]

xandespmu stands for Andes Performance Monitor Unit extension.
Based on the added Andes PMU ISA string, the SBI PMU driver
will make use of the non-standard irq source.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - No change
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - Include Geert's Reviewed-by
  - Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
  - Include Conor's Acked-by
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - No change
Changes v8 -> v9:
  - No change
---
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index 099f3df75b42..d7a66043f13b 100644
--- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -27,7 +27,7 @@ cpu0: cpu@0 {
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
 					       "zicntr", "zicsr", "zifencei",
-					       "zihpm";
+					       "zihpm", "xandespmu";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
-- 
2.34.1

Re: [PATCH v9 09/10] riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

[Geert Uytterhoeven]

On Thu, Feb 22, 2024 at 9:41 AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
> xandespmu stands for Andes Performance Monitor Unit extension.
> Based on the added Andes PMU ISA string, the SBI PMU driver
> will make use of the non-standard irq source.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> Changes v1 -> v2:
>   - New patch
> Changes v2 -> v3:
>   - No change
> Changes v3 -> v4:
>   - No change
> Changes v4 -> v5:
>   - Include Geert's Reviewed-by
>   - Include Prabhakar's Reviewed/Tested-by
> Changes v5 -> v6:
>   - Include Conor's Acked-by
> Changes v6 -> v7:
>   - No change
> Changes v7 -> v8:
>   - No change
> Changes v8 -> v9:
>   - No change

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
so Palmer can pick it up with the rest of the series
(the Renesas tree merge window for v6.9 has closed)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v9 10/10] riscv: andes: Support specifying symbolic firmware and hardware raw events

[Yu Chien Peter Lin]

From: Locus Wei-Han Chen <locus84@andestech.com>

Add the Andes AX45 JSON files that allows specifying symbolic event
names for the raw PMU events.

Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Ian Rogers <irogers@google.com>
---
Changes v1 -> v2:
  - No change
Changes v2 -> v3:
  - No change
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - Include Prabhakar's Tested-by
Changes v5 -> v6:
  - No change
Changes v6 -> v7:
  - No change
Changes v7 -> v8:
  - Include Atish's Acked-by
Changes v8 -> v9:
  - Include Ian's Acked-by
---
 .../arch/riscv/andes/ax45/firmware.json       |  68 ++++++++++
 .../arch/riscv/andes/ax45/instructions.json   | 127 ++++++++++++++++++
 .../arch/riscv/andes/ax45/memory.json         |  57 ++++++++
 .../arch/riscv/andes/ax45/microarch.json      |  77 +++++++++++
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |   1 +
 5 files changed, 330 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json

diff --git a/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json b/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
new file mode 100644
index 000000000000..9b4a032186a7
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
@@ -0,0 +1,68 @@
+[
+  {
+    "ArchStdEvent": "FW_MISALIGNED_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_MISALIGNED_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ILLEGAL_INSN"
+  },
+  {
+    "ArchStdEvent": "FW_SET_TIMER"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED"
+  }
+]
diff --git a/tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json b/tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
new file mode 100644
index 000000000000..713a08c1a40f
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
@@ -0,0 +1,127 @@
+[
+	{
+		"EventCode": "0x10",
+		"EventName": "cycle_count",
+		"BriefDescription": "Cycle count"
+	},
+	{
+		"EventCode": "0x20",
+		"EventName": "inst_count",
+		"BriefDescription": "Retired instruction count"
+	},
+	{
+		"EventCode": "0x30",
+		"EventName": "int_load_inst",
+		"BriefDescription": "Integer load instruction count"
+	},
+	{
+		"EventCode": "0x40",
+		"EventName": "int_store_inst",
+		"BriefDescription": "Integer store instruction count"
+	},
+	{
+		"EventCode": "0x50",
+		"EventName": "atomic_inst",
+		"BriefDescription": "Atomic instruction count"
+	},
+	{
+		"EventCode": "0x60",
+		"EventName": "sys_inst",
+		"BriefDescription": "System instruction count"
+	},
+	{
+		"EventCode": "0x70",
+		"EventName": "int_compute_inst",
+		"BriefDescription": "Integer computational instruction count"
+	},
+	{
+		"EventCode": "0x80",
+		"EventName": "condition_br",
+		"BriefDescription": "Conditional branch instruction count"
+	},
+	{
+		"EventCode": "0x90",
+		"EventName": "taken_condition_br",
+		"BriefDescription": "Taken conditional branch instruction count"
+	},
+	{
+		"EventCode": "0xA0",
+		"EventName": "jal_inst",
+		"BriefDescription": "JAL instruction count"
+	},
+	{
+		"EventCode": "0xB0",
+		"EventName": "jalr_inst",
+		"BriefDescription": "JALR instruction count"
+	},
+	{
+		"EventCode": "0xC0",
+		"EventName": "ret_inst",
+		"BriefDescription": "Return instruction count"
+	},
+	{
+		"EventCode": "0xD0",
+		"EventName": "control_trans_inst",
+		"BriefDescription": "Control transfer instruction count"
+	},
+	{
+		"EventCode": "0xE0",
+		"EventName": "ex9_inst",
+		"BriefDescription": "EXEC.IT instruction count"
+	},
+	{
+		"EventCode": "0xF0",
+		"EventName": "int_mul_inst",
+		"BriefDescription": "Integer multiplication instruction count"
+	},
+	{
+		"EventCode": "0x100",
+		"EventName": "int_div_rem_inst",
+		"BriefDescription": "Integer division/remainder instruction count"
+	},
+	{
+		"EventCode": "0x110",
+		"EventName": "float_load_inst",
+		"BriefDescription": "Floating-point load instruction count"
+	},
+	{
+		"EventCode": "0x120",
+		"EventName": "float_store_inst",
+		"BriefDescription": "Floating-point store instruction count"
+	},
+	{
+		"EventCode": "0x130",
+		"EventName": "float_add_sub_inst",
+		"BriefDescription": "Floating-point addition/subtraction instruction count"
+	},
+	{
+		"EventCode": "0x140",
+		"EventName": "float_mul_inst",
+		"BriefDescription": "Floating-point multiplication instruction count"
+	},
+	{
+		"EventCode": "0x150",
+		"EventName": "float_fused_muladd_inst",
+		"BriefDescription": "Floating-point fused multiply-add instruction count"
+	},
+	{
+		"EventCode": "0x160",
+		"EventName": "float_div_sqrt_inst",
+		"BriefDescription": "Floating-point division or square-root instruction count"
+	},
+	{
+		"EventCode": "0x170",
+		"EventName": "other_float_inst",
+		"BriefDescription": "Other floating-point instruction count"
+	},
+	{
+		"EventCode": "0x180",
+		"EventName": "int_mul_add_sub_inst",
+		"BriefDescription": "Integer multiplication and add/sub instruction count"
+	},
+	{
+		"EventCode": "0x190",
+		"EventName": "retired_ops",
+		"BriefDescription": "Retired operation count"
+	}
+]
diff --git a/tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json b/tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
new file mode 100644
index 000000000000..c7401b526c77
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
@@ -0,0 +1,57 @@
+[
+	{
+		"EventCode": "0x01",
+		"EventName": "ilm_access",
+		"BriefDescription": "ILM access"
+	},
+	{
+		"EventCode": "0x11",
+		"EventName": "dlm_access",
+		"BriefDescription": "DLM access"
+	},
+	{
+		"EventCode": "0x21",
+		"EventName": "icache_access",
+		"BriefDescription": "ICACHE access"
+	},
+	{
+		"EventCode": "0x31",
+		"EventName": "icache_miss",
+		"BriefDescription": "ICACHE miss"
+	},
+	{
+		"EventCode": "0x41",
+		"EventName": "dcache_access",
+		"BriefDescription": "DCACHE access"
+	},
+	{
+		"EventCode": "0x51",
+		"EventName": "dcache_miss",
+		"BriefDescription": "DCACHE miss"
+	},
+	{
+		"EventCode": "0x61",
+		"EventName": "dcache_load_access",
+		"BriefDescription": "DCACHE load access"
+	},
+	{
+		"EventCode": "0x71",
+		"EventName": "dcache_load_miss",
+		"BriefDescription": "DCACHE load miss"
+	},
+	{
+		"EventCode": "0x81",
+		"EventName": "dcache_store_access",
+		"BriefDescription": "DCACHE store access"
+	},
+	{
+		"EventCode": "0x91",
+		"EventName": "dcache_store_miss",
+		"BriefDescription": "DCACHE store miss"
+	},
+	{
+		"EventCode": "0xA1",
+		"EventName": "dcache_wb",
+		"BriefDescription": "DCACHE writeback"
+	}
+]
diff --git a/tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json b/tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json
new file mode 100644
index 000000000000..a6d378cbaa74
--- /dev/null
+++ b/tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json
@@ -0,0 +1,77 @@
+[
+	{
+		"EventCode": "0xB1",
+		"EventName": "cycle_wait_icache_fill",
+		"BriefDescription": "Cycles waiting for ICACHE fill data"
+	},
+	{
+		"EventCode": "0xC1",
+		"EventName": "cycle_wait_dcache_fill",
+		"BriefDescription": "Cycles waiting for DCACHE fill data"
+	},
+	{
+		"EventCode": "0xD1",
+		"EventName": "uncached_ifetch_from_bus",
+		"BriefDescription": "Uncached ifetch data access from bus"
+	},
+	{
+		"EventCode": "0xE1",
+		"EventName": "uncached_load_from_bus",
+		"BriefDescription": "Uncached load data access from bus"
+	},
+	{
+		"EventCode": "0xF1",
+		"EventName": "cycle_wait_uncached_ifetch",
+		"BriefDescription": "Cycles waiting for uncached ifetch data from bus"
+	},
+	{
+		"EventCode": "0x101",
+		"EventName": "cycle_wait_uncached_load",
+		"BriefDescription": "Cycles waiting for uncached load data from bus"
+	},
+	{
+		"EventCode": "0x111",
+		"EventName": "main_itlb_access",
+		"BriefDescription": "Main ITLB access"
+	},
+	{
+		"EventCode": "0x121",
+		"EventName": "main_itlb_miss",
+		"BriefDescription": "Main ITLB miss"
+	},
+	{
+		"EventCode": "0x131",
+		"EventName": "main_dtlb_access",
+		"BriefDescription": "Main DTLB access"
+	},
+	{
+		"EventCode": "0x141",
+		"EventName": "main_dtlb_miss",
+		"BriefDescription": "Main DTLB miss"
+	},
+	{
+		"EventCode": "0x151",
+		"EventName": "cycle_wait_itlb_fill",
+		"BriefDescription": "Cycles waiting for Main ITLB fill data"
+	},
+	{
+		"EventCode": "0x161",
+		"EventName": "pipe_stall_cycle_dtlb_miss",
+		"BriefDescription": "Pipeline stall cycles caused by Main DTLB miss"
+	},
+	{
+		"EventCode": "0x02",
+		"EventName": "mispredict_condition_br",
+		"BriefDescription": "Misprediction of conditional branches"
+	},
+	{
+		"EventCode": "0x12",
+		"EventName": "mispredict_take_condition_br",
+		"BriefDescription": "Misprediction of taken conditional branches"
+	},
+	{
+		"EventCode": "0x22",
+		"EventName": "mispredict_target_ret_inst",
+		"BriefDescription": "Misprediction of targets of Return instructions"
+	}
+]
diff --git a/tools/perf/pmu-events/arch/riscv/mapfile.csv b/tools/perf/pmu-events/arch/riscv/mapfile.csv
index cfc449b19810..3d3a809a5446 100644
--- a/tools/perf/pmu-events/arch/riscv/mapfile.csv
+++ b/tools/perf/pmu-events/arch/riscv/mapfile.csv
@@ -17,3 +17,4 @@
 0x489-0x8000000000000007-0x[[:xdigit:]]+,v1,sifive/u74,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
+0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
-- 
2.34.1

Re: [PATCH v9 00/10] Support Andes PMU extension

[patchwork-bot+linux-riscv]

Hello:

This series was applied to riscv/linux.git (for-next)
by Palmer Dabbelt <palmer@rivosinc.com>:

On Thu, 22 Feb 2024 16:39:36 +0800 you wrote:
> Hi All,
> 
> This patch series introduces the Andes PMU extension, which serves the
> same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
> is assigned to bit 18 in the custom S-mode local interrupt enable and
> pending registers (slie/slip), while the interrupt cause is (256 + 18).
> 
> [...]

Here is the summary with links:
  - [v9,01/10] riscv: errata: Rename defines for Andes
    https://git.kernel.org/riscv/c/be5e8872b3fb
  - [v9,02/10] irqchip/riscv-intc: Allow large non-standard interrupt number
    https://git.kernel.org/riscv/c/96303bcb401c
  - [v9,03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
    https://git.kernel.org/riscv/c/f4cc33e78ba8
  - [v9,04/10] dt-bindings: riscv: Add Andes interrupt controller compatible string
    https://git.kernel.org/riscv/c/b88727d554f0
  - [v9,05/10] riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
    https://git.kernel.org/riscv/c/95113bb70515
  - [v9,06/10] perf: RISC-V: Eliminate redundant interrupt enable/disable operations
    https://git.kernel.org/riscv/c/ea0e0178e101
  - [v9,07/10] perf: RISC-V: Introduce Andes PMU to support perf event sampling
    https://git.kernel.org/riscv/c/bc969d6cc96a
  - [v9,08/10] dt-bindings: riscv: Add Andes PMU extension description
    https://git.kernel.org/riscv/c/61609bf2b29d
  - [v9,09/10] riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
    https://git.kernel.org/riscv/c/270fc77e7b0e
  - [v9,10/10] riscv: andes: Support specifying symbolic firmware and hardware raw events
    https://git.kernel.org/riscv/c/f5102e31c209

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html