From: "Pali Rohár" <pali@kernel.org> To: "Russell King" <linux@armlinux.org.uk>, "Andrew Lunn" <andrew@lunn.ch>, "Heiner Kallweit" <hkallweit1@gmail.com>, "David S. Miller" <davem@davemloft.net>, "Jakub Kicinski" <kuba@kernel.org>, "Marek Behún" <kabel@kernel.org> Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Date: Wed, 30 Dec 2020 16:47:53 +0100 [thread overview] Message-ID: <20201230154755.14746-3-pali@kernel.org> (raw) In-Reply-To: <20201230154755.14746-1-pali@kernel.org> Some GPON SFP modules (e.g. Ubiquiti U-Fiber Instant) have set SFF phys_id in their EEPROM. Kernel SFP subsystem currently does not allow to use modules detected as SFF. This change extends check for SFP modules so also those with SFF phys_id are allowed. With this change also GPON SFP module Ubiquiti U-Fiber Instant is recognized. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/net/phy/sfp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 490e78a72dd6..73f3ecf15260 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -273,7 +273,8 @@ static const struct sff_data sff_data = { static bool sfp_module_supported(const struct sfp_eeprom_id *id) { - return id->base.phys_id == SFF8024_ID_SFP && + return (id->base.phys_id == SFF8024_ID_SFP || + id->base.phys_id == SFF8024_ID_SFF_8472) && id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; } -- 2.20.1
next prev parent reply other threads:[~2020-12-30 15:49 UTC|newest] Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2020-12-30 16:10 ` Russell King - ARM Linux admin 2020-12-30 16:56 ` Pali Rohár 2020-12-30 17:05 ` Russell King - ARM Linux admin 2020-12-30 17:13 ` Andrew Lunn 2020-12-30 17:43 ` Pali Rohár 2020-12-30 19:09 ` Russell King - ARM Linux admin 2020-12-30 19:49 ` Andrew Lunn 2020-12-31 12:14 ` Pali Rohár 2020-12-31 15:09 ` Andrew Lunn 2020-12-31 15:40 ` Pali Rohár 2020-12-31 15:30 ` Andrew Lunn 2020-12-31 17:00 ` Pali Rohár 2020-12-31 17:13 ` Andrew Lunn 2021-01-02 1:49 ` Pali Rohár 2021-01-03 2:25 ` Thomas Schreiber 2021-01-03 2:41 ` Pali Rohár 2021-01-06 14:55 ` Pali Rohár 2021-01-06 15:21 ` Russell King - ARM Linux admin 2021-01-06 15:23 ` Russell King - ARM Linux admin 2021-01-06 15:27 ` Russell King - ARM Linux admin 2021-01-06 15:35 ` Pali Rohár 2020-12-30 19:30 ` Andrew Lunn 2020-12-30 19:39 ` Russell King - ARM Linux admin 2020-12-30 17:31 ` Pali Rohár 2020-12-30 19:18 ` Russell King - ARM Linux admin 2020-12-30 15:47 ` Pali Rohár [this message] 2020-12-30 16:11 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Russell King - ARM Linux admin 2020-12-30 17:06 ` Pali Rohár 2020-12-30 17:27 ` Marek Behún 2020-12-30 19:12 ` Russell King - ARM Linux admin 2020-12-31 13:52 ` Pali Rohár 2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár 2020-12-30 16:13 ` Russell King - ARM Linux admin 2020-12-30 16:57 ` Pali Rohár 2020-12-30 17:06 ` Russell King - ARM Linux admin 2020-12-30 17:17 ` Andrew Lunn 2020-12-30 17:32 ` Pali Rohár 2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-07 2:02 ` Andrew Lunn 2021-01-07 9:08 ` Pali Rohár 2021-01-07 17:19 ` Andrew Lunn 2021-01-07 17:40 ` Russell King - ARM Linux admin 2021-01-07 19:18 ` Pali Rohár 2021-01-07 19:17 ` Pali Rohár 2021-01-07 19:45 ` Russell King - ARM Linux admin 2021-01-07 20:21 ` Marek Behún 2021-01-08 0:49 ` Pali Rohár 2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár 2021-01-07 16:54 ` Andrew Lunn 2021-01-09 15:46 ` Russell King - ARM Linux admin 2021-01-09 15:54 ` Andrew Lunn 2021-01-09 16:27 ` Russell King - ARM Linux admin 2021-01-09 19:14 ` Pali Rohár 2021-01-09 23:19 ` Russell King - ARM Linux admin 2021-01-09 23:50 ` Pali Rohár 2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-07 16:51 ` Andrew Lunn 2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-11 15:28 ` Marek Behún 2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-11 15:32 ` Marek Behún 2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-18 9:34 ` Pali Rohár 2021-01-25 14:09 ` Pali Rohár 2021-01-25 14:16 ` Russell King - ARM Linux admin 2021-01-25 14:23 ` Pali Rohár 2021-01-25 14:42 ` Russell King - ARM Linux admin 2021-01-25 14:47 ` Pali Rohár 2021-01-25 15:41 ` Andrew Lunn 2021-01-25 15:02 ` [PATCH v4 " Pali Rohár 2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201230154755.14746-3-pali@kernel.org \ --to=pali@kernel.org \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=hkallweit1@gmail.com \ --cc=kabel@kernel.org \ --cc=kuba@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --subject='Re: [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).