netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: "Russell King" <linux@armlinux.org.uk>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Marek Behún" <kabel@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set
Date: Wed, 30 Dec 2020 16:47:54 +0100	[thread overview]
Message-ID: <20201230154755.14746-4-pali@kernel.org> (raw)
In-Reply-To: <20201230154755.14746-1-pali@kernel.org>

Some GPON SFP modules (e.g. Ubiquiti U-Fiber Instant) have set both
SFP_OPTIONS_LOS_INVERTED and SFP_OPTIONS_LOS_NORMAL bits in their EEPROM.

Such combination of bits is meaningless so assume that LOS signal is not
implemented.

This patch fixes link carrier for GPON SFP module Ubiquiti U-Fiber Instant.

Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/net/phy/sfp.c | 36 ++++++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 14 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 73f3ecf15260..d47485ed239c 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1475,15 +1475,19 @@ static void sfp_sm_link_down(struct sfp *sfp)
 
 static void sfp_sm_link_check_los(struct sfp *sfp)
 {
-	unsigned int los = sfp->state & SFP_F_LOS;
+	const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED);
+	const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL);
+	__be16 los_options = sfp->id.ext.options & (los_inverted | los_normal);
+	bool los = false;
 
 	/* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL
-	 * are set, we assume that no LOS signal is available.
+	 * are set, we assume that no LOS signal is available. If both are
+	 * set, we assume LOS is not implemented (and is meaningless.)
 	 */
-	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED))
-		los ^= SFP_F_LOS;
-	else if (!(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL)))
-		los = 0;
+	if (los_options == los_inverted)
+		los = !(sfp->state & SFP_F_LOS);
+	else if (los_options == los_normal)
+		los = !!(sfp->state & SFP_F_LOS);
 
 	if (los)
 		sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
@@ -1493,18 +1497,22 @@ static void sfp_sm_link_check_los(struct sfp *sfp)
 
 static bool sfp_los_event_active(struct sfp *sfp, unsigned int event)
 {
-	return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) &&
-		event == SFP_E_LOS_LOW) ||
-	       (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) &&
-		event == SFP_E_LOS_HIGH);
+	const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED);
+	const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL);
+	__be16 los_options = sfp->id.ext.options & (los_inverted | los_normal);
+
+	return (los_options == los_inverted && event == SFP_E_LOS_LOW) ||
+	       (los_options == los_normal && event == SFP_E_LOS_HIGH);
 }
 
 static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event)
 {
-	return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) &&
-		event == SFP_E_LOS_HIGH) ||
-	       (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) &&
-		event == SFP_E_LOS_LOW);
+	const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED);
+	const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL);
+	__be16 los_options = sfp->id.ext.options & (los_inverted | los_normal);
+
+	return (los_options == los_inverted && event == SFP_E_LOS_HIGH) ||
+	       (los_options == los_normal && event == SFP_E_LOS_LOW);
 }
 
 static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
-- 
2.20.1


  parent reply	other threads:[~2020-12-30 15:49 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2020-12-30 16:10   ` Russell King - ARM Linux admin
2020-12-30 16:56     ` Pali Rohár
2020-12-30 17:05       ` Russell King - ARM Linux admin
2020-12-30 17:13         ` Andrew Lunn
2020-12-30 17:43           ` Pali Rohár
2020-12-30 19:09             ` Russell King - ARM Linux admin
2020-12-30 19:49               ` Andrew Lunn
2020-12-31 12:14               ` Pali Rohár
2020-12-31 15:09                 ` Andrew Lunn
2020-12-31 15:40                   ` Pali Rohár
2020-12-31 15:30                 ` Andrew Lunn
2020-12-31 17:00                   ` Pali Rohár
2020-12-31 17:13                     ` Andrew Lunn
2021-01-02  1:49                       ` Pali Rohár
2021-01-03  2:25                         ` Thomas Schreiber
2021-01-03  2:41                           ` Pali Rohár
2021-01-06 14:55                             ` Pali Rohár
2021-01-06 15:21                               ` Russell King - ARM Linux admin
2021-01-06 15:23                                 ` Russell King - ARM Linux admin
2021-01-06 15:27                                   ` Russell King - ARM Linux admin
2021-01-06 15:35                                     ` Pali Rohár
2020-12-30 19:30             ` Andrew Lunn
2020-12-30 19:39               ` Russell King - ARM Linux admin
2020-12-30 17:31         ` Pali Rohár
2020-12-30 19:18           ` Russell King - ARM Linux admin
2020-12-30 15:47 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Pali Rohár
2020-12-30 16:11   ` Russell King - ARM Linux admin
2020-12-30 17:06     ` Pali Rohár
2020-12-30 17:27       ` Marek Behún
2020-12-30 19:12         ` Russell King - ARM Linux admin
2020-12-31 13:52           ` Pali Rohár
2020-12-30 15:47 ` Pali Rohár [this message]
2020-12-30 16:13   ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Russell King - ARM Linux admin
2020-12-30 16:57     ` Pali Rohár
2020-12-30 17:06       ` Russell King - ARM Linux admin
2020-12-30 17:17         ` Andrew Lunn
2020-12-30 17:32           ` Pali Rohár
2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-06 15:37   ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-07  2:02     ` Andrew Lunn
2021-01-07  9:08       ` Pali Rohár
2021-01-07 17:19     ` Andrew Lunn
2021-01-07 17:40       ` Russell King - ARM Linux admin
2021-01-07 19:18         ` Pali Rohár
2021-01-07 19:17       ` Pali Rohár
2021-01-07 19:45       ` Russell King - ARM Linux admin
2021-01-07 20:21         ` Marek Behún
2021-01-08  0:49           ` Pali Rohár
2021-01-06 15:37   ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2021-01-07 16:54     ` Andrew Lunn
2021-01-09 15:46       ` Russell King - ARM Linux admin
2021-01-09 15:54         ` Andrew Lunn
2021-01-09 16:27           ` Russell King - ARM Linux admin
2021-01-09 19:14         ` Pali Rohár
2021-01-09 23:19           ` Russell King - ARM Linux admin
2021-01-09 23:50             ` Pali Rohár
2021-01-06 15:37   ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-07 16:51     ` Andrew Lunn
2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-11 11:39   ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-11 15:28     ` Marek Behún
2021-01-11 11:39   ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-11 15:32     ` Marek Behún
2021-01-12 13:33   ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-18  9:34   ` Pali Rohár
2021-01-25 14:09     ` Pali Rohár
2021-01-25 14:16       ` Russell King - ARM Linux admin
2021-01-25 14:23         ` Pali Rohár
2021-01-25 14:42           ` Russell King - ARM Linux admin
2021-01-25 14:47             ` Pali Rohár
2021-01-25 15:41               ` Andrew Lunn
2021-01-25 15:02 ` [PATCH v4 " Pali Rohár
2021-01-25 15:02   ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-25 15:02   ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-28 21:50   ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201230154755.14746-4-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).