From: "Pali Rohár" <pali@kernel.org>
To: Andrew Lunn <andrew@lunn.ch>, Thomas Schreiber <tschreibe@gmail.com>
Cc: "Russell King - ARM Linux admin" <linux@armlinux.org.uk>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Marek Behún" <kabel@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips
Date: Sat, 2 Jan 2021 02:49:55 +0100 [thread overview]
Message-ID: <20210102014955.2xv27xla65eeqyzz@pali> (raw)
In-Reply-To: <X+4GwpFnJ0Asq/Yj@lunn.ch>
On Thursday 31 December 2020 18:13:38 Andrew Lunn wrote:
> > > Looking at sfp_module_info(), adding a check for i2c_block_size < 2
> > > when determining what length to return. ethtool should do the right
> > > thing, know that the second page has not been returned to user space.
> >
> > But if we limit length of eeprom then userspace would not be able to
> > access those TX_DISABLE, LOS and other bits from byte 110 at address A2.
>
> Have you tested these bits to see if they actually work? If they don't
> work...
On Ubiquiti module that LOS bit does not work.
I think that on CarlitoxxPro module LOS bit worked. But I cannot test it
right now as I do not have access to testing OLT unit.
Adding Thomas to loop. Can you check if CarlitoxxPro GPON ONT module
supports LOS or other bits at byte offset 110 at address A2?
next prev parent reply other threads:[~2021-01-02 1:50 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2020-12-30 16:10 ` Russell King - ARM Linux admin
2020-12-30 16:56 ` Pali Rohár
2020-12-30 17:05 ` Russell King - ARM Linux admin
2020-12-30 17:13 ` Andrew Lunn
2020-12-30 17:43 ` Pali Rohár
2020-12-30 19:09 ` Russell King - ARM Linux admin
2020-12-30 19:49 ` Andrew Lunn
2020-12-31 12:14 ` Pali Rohár
2020-12-31 15:09 ` Andrew Lunn
2020-12-31 15:40 ` Pali Rohár
2020-12-31 15:30 ` Andrew Lunn
2020-12-31 17:00 ` Pali Rohár
2020-12-31 17:13 ` Andrew Lunn
2021-01-02 1:49 ` Pali Rohár [this message]
2021-01-03 2:25 ` Thomas Schreiber
2021-01-03 2:41 ` Pali Rohár
2021-01-06 14:55 ` Pali Rohár
2021-01-06 15:21 ` Russell King - ARM Linux admin
2021-01-06 15:23 ` Russell King - ARM Linux admin
2021-01-06 15:27 ` Russell King - ARM Linux admin
2021-01-06 15:35 ` Pali Rohár
2020-12-30 19:30 ` Andrew Lunn
2020-12-30 19:39 ` Russell King - ARM Linux admin
2020-12-30 17:31 ` Pali Rohár
2020-12-30 19:18 ` Russell King - ARM Linux admin
2020-12-30 15:47 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Pali Rohár
2020-12-30 16:11 ` Russell King - ARM Linux admin
2020-12-30 17:06 ` Pali Rohár
2020-12-30 17:27 ` Marek Behún
2020-12-30 19:12 ` Russell King - ARM Linux admin
2020-12-31 13:52 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2020-12-30 16:13 ` Russell King - ARM Linux admin
2020-12-30 16:57 ` Pali Rohár
2020-12-30 17:06 ` Russell King - ARM Linux admin
2020-12-30 17:17 ` Andrew Lunn
2020-12-30 17:32 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-07 2:02 ` Andrew Lunn
2021-01-07 9:08 ` Pali Rohár
2021-01-07 17:19 ` Andrew Lunn
2021-01-07 17:40 ` Russell King - ARM Linux admin
2021-01-07 19:18 ` Pali Rohár
2021-01-07 19:17 ` Pali Rohár
2021-01-07 19:45 ` Russell King - ARM Linux admin
2021-01-07 20:21 ` Marek Behún
2021-01-08 0:49 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2021-01-07 16:54 ` Andrew Lunn
2021-01-09 15:46 ` Russell King - ARM Linux admin
2021-01-09 15:54 ` Andrew Lunn
2021-01-09 16:27 ` Russell King - ARM Linux admin
2021-01-09 19:14 ` Pali Rohár
2021-01-09 23:19 ` Russell King - ARM Linux admin
2021-01-09 23:50 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-07 16:51 ` Andrew Lunn
2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-11 15:28 ` Marek Behún
2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-11 15:32 ` Marek Behún
2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-18 9:34 ` Pali Rohár
2021-01-25 14:09 ` Pali Rohár
2021-01-25 14:16 ` Russell King - ARM Linux admin
2021-01-25 14:23 ` Pali Rohár
2021-01-25 14:42 ` Russell King - ARM Linux admin
2021-01-25 14:47 ` Pali Rohár
2021-01-25 15:41 ` Andrew Lunn
2021-01-25 15:02 ` [PATCH v4 " Pali Rohár
2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210102014955.2xv27xla65eeqyzz@pali \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=tschreibe@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).