From: Andrew Lunn <andrew@lunn.ch>
To: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: "Pali Rohár" <pali@kernel.org>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Marek Behún" <kabel@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips
Date: Wed, 30 Dec 2020 20:49:23 +0100 [thread overview]
Message-ID: <X+zZw/6mmpoHVLDm@lunn.ch> (raw)
In-Reply-To: <20201230190958.GW1551@shell.armlinux.org.uk>
> Which shows why it's pointless producing an EEPROM validation tool that
> runs under Linux (as has been your suggestion). They won't use it,
> since their testing only goes as far as "does it work in our product?"
Yes, i would need SNIA to push for conformance testing, hold
plug-testing events, and marketing that only devices which pass the
conformance test are allowed to use the SNIA logo, etc.
They do seem to have conformance testing for some of their storage
standards, but nothing for SFPs.
Andrew
next prev parent reply other threads:[~2020-12-30 19:50 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2020-12-30 16:10 ` Russell King - ARM Linux admin
2020-12-30 16:56 ` Pali Rohár
2020-12-30 17:05 ` Russell King - ARM Linux admin
2020-12-30 17:13 ` Andrew Lunn
2020-12-30 17:43 ` Pali Rohár
2020-12-30 19:09 ` Russell King - ARM Linux admin
2020-12-30 19:49 ` Andrew Lunn [this message]
2020-12-31 12:14 ` Pali Rohár
2020-12-31 15:09 ` Andrew Lunn
2020-12-31 15:40 ` Pali Rohár
2020-12-31 15:30 ` Andrew Lunn
2020-12-31 17:00 ` Pali Rohár
2020-12-31 17:13 ` Andrew Lunn
2021-01-02 1:49 ` Pali Rohár
2021-01-03 2:25 ` Thomas Schreiber
2021-01-03 2:41 ` Pali Rohár
2021-01-06 14:55 ` Pali Rohár
2021-01-06 15:21 ` Russell King - ARM Linux admin
2021-01-06 15:23 ` Russell King - ARM Linux admin
2021-01-06 15:27 ` Russell King - ARM Linux admin
2021-01-06 15:35 ` Pali Rohár
2020-12-30 19:30 ` Andrew Lunn
2020-12-30 19:39 ` Russell King - ARM Linux admin
2020-12-30 17:31 ` Pali Rohár
2020-12-30 19:18 ` Russell King - ARM Linux admin
2020-12-30 15:47 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Pali Rohár
2020-12-30 16:11 ` Russell King - ARM Linux admin
2020-12-30 17:06 ` Pali Rohár
2020-12-30 17:27 ` Marek Behún
2020-12-30 19:12 ` Russell King - ARM Linux admin
2020-12-31 13:52 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2020-12-30 16:13 ` Russell King - ARM Linux admin
2020-12-30 16:57 ` Pali Rohár
2020-12-30 17:06 ` Russell King - ARM Linux admin
2020-12-30 17:17 ` Andrew Lunn
2020-12-30 17:32 ` Pali Rohár
2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-07 2:02 ` Andrew Lunn
2021-01-07 9:08 ` Pali Rohár
2021-01-07 17:19 ` Andrew Lunn
2021-01-07 17:40 ` Russell King - ARM Linux admin
2021-01-07 19:18 ` Pali Rohár
2021-01-07 19:17 ` Pali Rohár
2021-01-07 19:45 ` Russell King - ARM Linux admin
2021-01-07 20:21 ` Marek Behún
2021-01-08 0:49 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár
2021-01-07 16:54 ` Andrew Lunn
2021-01-09 15:46 ` Russell King - ARM Linux admin
2021-01-09 15:54 ` Andrew Lunn
2021-01-09 16:27 ` Russell King - ARM Linux admin
2021-01-09 19:14 ` Pali Rohár
2021-01-09 23:19 ` Russell King - ARM Linux admin
2021-01-09 23:50 ` Pali Rohár
2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-07 16:51 ` Andrew Lunn
2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-11 15:28 ` Marek Behún
2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-11 15:32 ` Marek Behún
2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár
2021-01-18 9:34 ` Pali Rohár
2021-01-25 14:09 ` Pali Rohár
2021-01-25 14:16 ` Russell King - ARM Linux admin
2021-01-25 14:23 ` Pali Rohár
2021-01-25 14:42 ` Russell King - ARM Linux admin
2021-01-25 14:47 ` Pali Rohár
2021-01-25 15:41 ` Andrew Lunn
2021-01-25 15:02 ` [PATCH v4 " Pali Rohár
2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár
2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár
2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X+zZw/6mmpoHVLDm@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).