Re: [PATCH] vdpa/mlx5: set_features should allow reset to zero

["Michael S. Tsirkin" <mst@redhat.com>]

On Mon, Feb 22, 2021 at 12:14:17PM +0800, Jason Wang wrote:
> 
> On 2021/2/19 7:54 下午, Si-Wei Liu wrote:
> > Commit 452639a64ad8 ("vdpa: make sure set_features is invoked
> > for legacy") made an exception for legacy guests to reset
> > features to 0, when config space is accessed before features
> > are set. We should relieve the verify_min_features() check
> > and allow features reset to 0 for this case.
> > 
> > It's worth noting that not just legacy guests could access
> > config space before features are set. For instance, when
> > feature VIRTIO_NET_F_MTU is advertised some modern driver
> > will try to access and validate the MTU present in the config
> > space before virtio features are set.
> 
> 
> This looks like a spec violation:
> 
> "
> 
> The following driver-read-only field, mtu only exists if VIRTIO_NET_F_MTU is
> set.
> This field specifies the maximum MTU for the driver to use.
> "
> 
> Do we really want to workaround this?
> 
> Thanks

And also:

The driver MUST follow this sequence to initialize a device:
1. Reset the device.
2. Set the ACKNOWLEDGE status bit: the guest OS has noticed the device.
3. Set the DRIVER status bit: the guest OS knows how to drive the device.
4. Read device feature bits, and write the subset of feature bits understood by the OS and driver to the
device. During this step the driver MAY read (but MUST NOT write) the device-specific configuration
fields to check that it can support the device before accepting it.
5. Set the FEATURES_OK status bit. The driver MUST NOT accept new feature bits after this step.
6. Re-read device status to ensure the FEATURES_OK bit is still set: otherwise, the device does not
support our subset of features and the device is unusable.
7. Perform device-specific setup, including discovery of virtqueues for the device, optional per-bus setup,
reading and possibly writing the device’s virtio configuration space, and population of virtqueues.
8. Set the DRIVER_OK status bit. At this point the device is “live”.


so accessing config space before FEATURES_OK is a spec violation, right?


> 
> > Rejecting reset to 0
> > prematurely causes correct MTU and link status unable to load
> > for the very first config space access, rendering issues like
> > guest showing inaccurate MTU value, or failure to reject
> > out-of-range MTU.
> > 
> > Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> > Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
> > ---
> >   drivers/vdpa/mlx5/net/mlx5_vnet.c | 15 +--------------
> >   1 file changed, 1 insertion(+), 14 deletions(-)
> > 
> > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > index 7c1f789..540dd67 100644
> > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > @@ -1490,14 +1490,6 @@ static u64 mlx5_vdpa_get_features(struct vdpa_device *vdev)
> >   	return mvdev->mlx_features;
> >   }
> > -static int verify_min_features(struct mlx5_vdpa_dev *mvdev, u64 features)
> > -{
> > -	if (!(features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM)))
> > -		return -EOPNOTSUPP;
> > -
> > -	return 0;
> > -}
> > -
> >   static int setup_virtqueues(struct mlx5_vdpa_net *ndev)
> >   {
> >   	int err;
> > @@ -1558,18 +1550,13 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
> >   {
> >   	struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
> >   	struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
> > -	int err;
> >   	print_features(mvdev, features, true);
> > -	err = verify_min_features(mvdev, features);
> > -	if (err)
> > -		return err;
> > -
> >   	ndev->mvdev.actual_features = features & ndev->mvdev.mlx_features;
> >   	ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, ndev->mtu);
> >   	ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
> > -	return err;
> > +	return 0;
> >   }
> >   static void mlx5_vdpa_set_config_cb(struct vdpa_device *vdev, struct vdpa_callback *cb)