From: Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org
Cc: computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR
Date: Mon, 28 Apr 2014 11:53:44 +0800 [thread overview]
Message-ID: <1398657227-20721-8-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1398657227-20721-1-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Add the DDR quad read support for the fsl-quadspi driver.
Check the "spi-nor,ddr-quad-read-dummy" DT property, if the DT node is exit,
it means we could enable the DDR quad read.
(1) Test this patch with imx6sx-sdb board (Spansion s25fl128s)
The clock rate is 66MHz.
(2) The information of NOR flash:
-----------------------------------------------
root@imx6qdlsolo:~# mtdinfo /dev/mtd0
mtd0
Name: 21e4000.qspi
Type: nor
Eraseblock size: 65536 bytes, 64.0 KiB
Amount of eraseblocks: 256 (16777216 bytes, 16.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:0
Bad blocks are allowed: false
Device is writable: true
-----------------------------------------------
(3) Test this patch set with UBIFS & bonnie++:
-----------------------------------------------
ubiattach /dev/ubi_ctrl -m 0
ubimkvol /dev/ubi0 -N test -m
mount -t ubifs ubi0:test tmp
bonnie++ -d tmp -u 0 -s 10 -r 5
-----------------------------------------------
(4) Test this patch with mtd_speedtest.ko
root@imx6qdlsolo:~# insmod mtd_speedtest.ko dev=0
=================================================
mtd_speedtest: MTD device: 0
mtd_speedtest: not NAND flash, assume page size is 512 bytes.
mtd_speedtest: MTD device size 16777216, eraseblock size 65536, page size 512,
count of eraseblocks 256, pages per eraseblock 128, OOB size 0
mtd_speedtest: testing eraseblock write speed
mtd_speedtest: eraseblock write speed is 665 KiB/s
mtd_speedtest: testing eraseblock read speed
mtd_speedtest: eraseblock read speed is 49799 KiB/s
mtd_speedtest: testing page write speed
mtd_speedtest: page write speed is 662 KiB/s
mtd_speedtest: testing page read speed
mtd_speedtest: page read speed is 24236 KiB/s
mtd_speedtest: testing 2 page write speed
mtd_speedtest: 2 page write speed is 657 KiB/s
mtd_speedtest: testing 2 page read speed
mtd_speedtest: 2 page read speed is 32637 KiB/s
mtd_speedtest: Testing erase speed
mtd_speedtest: erase speed is 518 KiB/s
mtd_speedtest: Testing 2x multi-block erase speed
mtd_speedtest: 2x multi-block erase speed is 506 KiB/s
mtd_speedtest: Testing 4x multi-block erase speed
mtd_speedtest: 4x multi-block erase speed is 503 KiB/s
mtd_speedtest: Testing 8x multi-block erase speed
mtd_speedtest: 8x multi-block erase speed is 501 KiB/s
mtd_speedtest: Testing 16x multi-block erase speed
mtd_speedtest: 16x multi-block erase speed is 498 KiB/s
mtd_speedtest: Testing 32x multi-block erase speed
mtd_speedtest: 32x multi-block erase speed is 496 KiB/s
mtd_speedtest: Testing 64x multi-block erase speed
mtd_speedtest: 64x multi-block erase speed is 495 KiB/s
mtd_speedtest: finished
=================================================
(5) Conclusion:
The DDR quad read could be 49799 KiB/s.
Signed-off-by: Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 62 +++++++++++++++++++++++++++++++++++--
1 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 4adf79e..a5dbc62 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -29,6 +29,9 @@
/* The registers */
#define QUADSPI_MCR 0x00
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT 29
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK \
+ (1 << MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT)
#define QUADSPI_MCR_RESERVED_SHIFT 16
#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT)
#define QUADSPI_MCR_MDIS_SHIFT 14
@@ -292,7 +295,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
for (i = 0; i < QUADSPI_LUT_NUM; i++)
writel(0, base + QUADSPI_LUT_BASE + i * 4);
- /* Quad Read */
+ /* Quad Read and DDR Quad Read*/
lut_base = SEQID_QUAD_READ * 4;
op = nor->read_opcode;
dm = nor->read_dummy;
@@ -307,6 +310,24 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
} else {
dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
}
+ } else if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ if (op == SPINOR_OP_READ_1_4_4_D ||
+ op == SPINOR_OP_READ4_1_4_4_D) {
+ /* read mode : 1-4-4, such as Spansion s25fl128s. */
+ writel(LUT0(CMD, PAD1, op)
+ | LUT1(ADDR_DDR, PAD4, addrlen),
+ base + QUADSPI_LUT(lut_base));
+
+ writel(LUT0(MODE_DDR, PAD4, 0xff)
+ | LUT1(DUMMY, PAD1, dm),
+ base + QUADSPI_LUT(lut_base + 1));
+
+ writel(LUT0(READ_DDR, PAD4, rxfifo)
+ | LUT1(JMP_ON_CS, PAD1, 0),
+ base + QUADSPI_LUT(lut_base + 2));
+ } else {
+ dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ }
}
/* Write enable */
@@ -368,6 +389,9 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
+ case SPINOR_OP_READ_1_4_4_D:
+ case SPINOR_OP_READ4_1_4_4_D:
+ case SPINOR_OP_READ4_1_1_4:
case SPINOR_OP_READ_1_1_4:
return SEQID_QUAD_READ;
case SPINOR_OP_WREN:
@@ -558,6 +582,8 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
+ struct spi_nor *nor = &q->nor[0];
+ u32 reg, reg2;
int seqid;
/* AHB configuration for access buffer 0/1/2 .*/
@@ -572,9 +598,30 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
writel(0, base + QUADSPI_BUF2IND);
/* Set the default lut sequence for AHB Read. */
- seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ seqid = fsl_qspi_get_seqid(q, nor->read_opcode);
writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ /* enable the DDR quad read */
+ if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ reg = readl(q->iobase + QUADSPI_MCR);
+
+ /* Firstly, disable the module */
+ writel(reg | QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+
+ /* Set the Sampling Register for DDR */
+ reg2 = readl(q->iobase + QUADSPI_SMPR);
+ reg2 &= ~QUADSPI_SMPR_DDRSMP_MASK;
+ reg2 |= (2 << QUADSPI_SMPR_DDRSMP_SHIFT);
+ writel(reg2, q->iobase + QUADSPI_SMPR);
+
+ /* Enable the module again (enable the DDR too) */
+ reg |= QUADSPI_MCR_DDR_EN_MASK;
+ if (is_imx6sx_qspi(q))
+ reg |= MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK;
+
+ writel(reg, q->iobase + QUADSPI_MCR);
+ }
}
/* We use this function to do some basic init for spi_nor_scan(). */
@@ -863,7 +910,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
const struct spi_device_id *id;
+ enum read_mode mode = SPI_NOR_QUAD;
char modalias[40];
+ u32 dummy = 0;
/* skip the holes */
if (!has_second_chip)
@@ -874,6 +923,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
nor->mtd = mtd;
nor->dev = dev;
+ nor->np = np;
nor->priv = q;
mtd->priv = nor;
@@ -899,10 +949,16 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (ret < 0)
goto map_failed;
+ /* Can we enable the DDR Quad Read? */
+ ret = of_property_read_u32(np, "spi-nor,ddr-quad-read-dummy",
+ &dummy);
+ if (!ret && dummy > 0)
+ mode = SPI_NOR_DDR_QUAD;
+
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, id, mode);
if (ret)
goto map_failed;
--
1.7.2.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: <computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<marex-ynQEQJNshbs@public.gmane.org>,
<linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR
Date: Mon, 28 Apr 2014 11:53:44 +0800 [thread overview]
Message-ID: <1398657227-20721-8-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1398657227-20721-1-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Add the DDR quad read support for the fsl-quadspi driver.
Check the "spi-nor,ddr-quad-read-dummy" DT property, if the DT node is exit,
it means we could enable the DDR quad read.
(1) Test this patch with imx6sx-sdb board (Spansion s25fl128s)
The clock rate is 66MHz.
(2) The information of NOR flash:
-----------------------------------------------
root@imx6qdlsolo:~# mtdinfo /dev/mtd0
mtd0
Name: 21e4000.qspi
Type: nor
Eraseblock size: 65536 bytes, 64.0 KiB
Amount of eraseblocks: 256 (16777216 bytes, 16.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:0
Bad blocks are allowed: false
Device is writable: true
-----------------------------------------------
(3) Test this patch set with UBIFS & bonnie++:
-----------------------------------------------
ubiattach /dev/ubi_ctrl -m 0
ubimkvol /dev/ubi0 -N test -m
mount -t ubifs ubi0:test tmp
bonnie++ -d tmp -u 0 -s 10 -r 5
-----------------------------------------------
(4) Test this patch with mtd_speedtest.ko
root@imx6qdlsolo:~# insmod mtd_speedtest.ko dev=0
=================================================
mtd_speedtest: MTD device: 0
mtd_speedtest: not NAND flash, assume page size is 512 bytes.
mtd_speedtest: MTD device size 16777216, eraseblock size 65536, page size 512,
count of eraseblocks 256, pages per eraseblock 128, OOB size 0
mtd_speedtest: testing eraseblock write speed
mtd_speedtest: eraseblock write speed is 665 KiB/s
mtd_speedtest: testing eraseblock read speed
mtd_speedtest: eraseblock read speed is 49799 KiB/s
mtd_speedtest: testing page write speed
mtd_speedtest: page write speed is 662 KiB/s
mtd_speedtest: testing page read speed
mtd_speedtest: page read speed is 24236 KiB/s
mtd_speedtest: testing 2 page write speed
mtd_speedtest: 2 page write speed is 657 KiB/s
mtd_speedtest: testing 2 page read speed
mtd_speedtest: 2 page read speed is 32637 KiB/s
mtd_speedtest: Testing erase speed
mtd_speedtest: erase speed is 518 KiB/s
mtd_speedtest: Testing 2x multi-block erase speed
mtd_speedtest: 2x multi-block erase speed is 506 KiB/s
mtd_speedtest: Testing 4x multi-block erase speed
mtd_speedtest: 4x multi-block erase speed is 503 KiB/s
mtd_speedtest: Testing 8x multi-block erase speed
mtd_speedtest: 8x multi-block erase speed is 501 KiB/s
mtd_speedtest: Testing 16x multi-block erase speed
mtd_speedtest: 16x multi-block erase speed is 498 KiB/s
mtd_speedtest: Testing 32x multi-block erase speed
mtd_speedtest: 32x multi-block erase speed is 496 KiB/s
mtd_speedtest: Testing 64x multi-block erase speed
mtd_speedtest: 64x multi-block erase speed is 495 KiB/s
mtd_speedtest: finished
=================================================
(5) Conclusion:
The DDR quad read could be 49799 KiB/s.
Signed-off-by: Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 62 +++++++++++++++++++++++++++++++++++--
1 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 4adf79e..a5dbc62 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -29,6 +29,9 @@
/* The registers */
#define QUADSPI_MCR 0x00
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT 29
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK \
+ (1 << MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT)
#define QUADSPI_MCR_RESERVED_SHIFT 16
#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT)
#define QUADSPI_MCR_MDIS_SHIFT 14
@@ -292,7 +295,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
for (i = 0; i < QUADSPI_LUT_NUM; i++)
writel(0, base + QUADSPI_LUT_BASE + i * 4);
- /* Quad Read */
+ /* Quad Read and DDR Quad Read*/
lut_base = SEQID_QUAD_READ * 4;
op = nor->read_opcode;
dm = nor->read_dummy;
@@ -307,6 +310,24 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
} else {
dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
}
+ } else if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ if (op == SPINOR_OP_READ_1_4_4_D ||
+ op == SPINOR_OP_READ4_1_4_4_D) {
+ /* read mode : 1-4-4, such as Spansion s25fl128s. */
+ writel(LUT0(CMD, PAD1, op)
+ | LUT1(ADDR_DDR, PAD4, addrlen),
+ base + QUADSPI_LUT(lut_base));
+
+ writel(LUT0(MODE_DDR, PAD4, 0xff)
+ | LUT1(DUMMY, PAD1, dm),
+ base + QUADSPI_LUT(lut_base + 1));
+
+ writel(LUT0(READ_DDR, PAD4, rxfifo)
+ | LUT1(JMP_ON_CS, PAD1, 0),
+ base + QUADSPI_LUT(lut_base + 2));
+ } else {
+ dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ }
}
/* Write enable */
@@ -368,6 +389,9 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
+ case SPINOR_OP_READ_1_4_4_D:
+ case SPINOR_OP_READ4_1_4_4_D:
+ case SPINOR_OP_READ4_1_1_4:
case SPINOR_OP_READ_1_1_4:
return SEQID_QUAD_READ;
case SPINOR_OP_WREN:
@@ -558,6 +582,8 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
+ struct spi_nor *nor = &q->nor[0];
+ u32 reg, reg2;
int seqid;
/* AHB configuration for access buffer 0/1/2 .*/
@@ -572,9 +598,30 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
writel(0, base + QUADSPI_BUF2IND);
/* Set the default lut sequence for AHB Read. */
- seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ seqid = fsl_qspi_get_seqid(q, nor->read_opcode);
writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ /* enable the DDR quad read */
+ if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ reg = readl(q->iobase + QUADSPI_MCR);
+
+ /* Firstly, disable the module */
+ writel(reg | QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+
+ /* Set the Sampling Register for DDR */
+ reg2 = readl(q->iobase + QUADSPI_SMPR);
+ reg2 &= ~QUADSPI_SMPR_DDRSMP_MASK;
+ reg2 |= (2 << QUADSPI_SMPR_DDRSMP_SHIFT);
+ writel(reg2, q->iobase + QUADSPI_SMPR);
+
+ /* Enable the module again (enable the DDR too) */
+ reg |= QUADSPI_MCR_DDR_EN_MASK;
+ if (is_imx6sx_qspi(q))
+ reg |= MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK;
+
+ writel(reg, q->iobase + QUADSPI_MCR);
+ }
}
/* We use this function to do some basic init for spi_nor_scan(). */
@@ -863,7 +910,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
const struct spi_device_id *id;
+ enum read_mode mode = SPI_NOR_QUAD;
char modalias[40];
+ u32 dummy = 0;
/* skip the holes */
if (!has_second_chip)
@@ -874,6 +923,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
nor->mtd = mtd;
nor->dev = dev;
+ nor->np = np;
nor->priv = q;
mtd->priv = nor;
@@ -899,10 +949,16 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (ret < 0)
goto map_failed;
+ /* Can we enable the DDR Quad Read? */
+ ret = of_property_read_u32(np, "spi-nor,ddr-quad-read-dummy",
+ &dummy);
+ if (!ret && dummy > 0)
+ mode = SPI_NOR_DDR_QUAD;
+
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, id, mode);
if (ret)
goto map_failed;
--
1.7.2.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Huang Shijie <b32955@freescale.com>
To: <dwmw2@infradead.org>
Cc: marex@denx.de, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org, linux-spi@vger.kernel.org,
Huang Shijie <b32955@freescale.com>,
linux-mtd@lists.infradead.org, computersforpeace@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR
Date: Mon, 28 Apr 2014 11:53:44 +0800 [thread overview]
Message-ID: <1398657227-20721-8-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1398657227-20721-1-git-send-email-b32955@freescale.com>
Add the DDR quad read support for the fsl-quadspi driver.
Check the "spi-nor,ddr-quad-read-dummy" DT property, if the DT node is exit,
it means we could enable the DDR quad read.
(1) Test this patch with imx6sx-sdb board (Spansion s25fl128s)
The clock rate is 66MHz.
(2) The information of NOR flash:
-----------------------------------------------
root@imx6qdlsolo:~# mtdinfo /dev/mtd0
mtd0
Name: 21e4000.qspi
Type: nor
Eraseblock size: 65536 bytes, 64.0 KiB
Amount of eraseblocks: 256 (16777216 bytes, 16.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:0
Bad blocks are allowed: false
Device is writable: true
-----------------------------------------------
(3) Test this patch set with UBIFS & bonnie++:
-----------------------------------------------
ubiattach /dev/ubi_ctrl -m 0
ubimkvol /dev/ubi0 -N test -m
mount -t ubifs ubi0:test tmp
bonnie++ -d tmp -u 0 -s 10 -r 5
-----------------------------------------------
(4) Test this patch with mtd_speedtest.ko
root@imx6qdlsolo:~# insmod mtd_speedtest.ko dev=0
=================================================
mtd_speedtest: MTD device: 0
mtd_speedtest: not NAND flash, assume page size is 512 bytes.
mtd_speedtest: MTD device size 16777216, eraseblock size 65536, page size 512,
count of eraseblocks 256, pages per eraseblock 128, OOB size 0
mtd_speedtest: testing eraseblock write speed
mtd_speedtest: eraseblock write speed is 665 KiB/s
mtd_speedtest: testing eraseblock read speed
mtd_speedtest: eraseblock read speed is 49799 KiB/s
mtd_speedtest: testing page write speed
mtd_speedtest: page write speed is 662 KiB/s
mtd_speedtest: testing page read speed
mtd_speedtest: page read speed is 24236 KiB/s
mtd_speedtest: testing 2 page write speed
mtd_speedtest: 2 page write speed is 657 KiB/s
mtd_speedtest: testing 2 page read speed
mtd_speedtest: 2 page read speed is 32637 KiB/s
mtd_speedtest: Testing erase speed
mtd_speedtest: erase speed is 518 KiB/s
mtd_speedtest: Testing 2x multi-block erase speed
mtd_speedtest: 2x multi-block erase speed is 506 KiB/s
mtd_speedtest: Testing 4x multi-block erase speed
mtd_speedtest: 4x multi-block erase speed is 503 KiB/s
mtd_speedtest: Testing 8x multi-block erase speed
mtd_speedtest: 8x multi-block erase speed is 501 KiB/s
mtd_speedtest: Testing 16x multi-block erase speed
mtd_speedtest: 16x multi-block erase speed is 498 KiB/s
mtd_speedtest: Testing 32x multi-block erase speed
mtd_speedtest: 32x multi-block erase speed is 496 KiB/s
mtd_speedtest: Testing 64x multi-block erase speed
mtd_speedtest: 64x multi-block erase speed is 495 KiB/s
mtd_speedtest: finished
=================================================
(5) Conclusion:
The DDR quad read could be 49799 KiB/s.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 62 +++++++++++++++++++++++++++++++++++--
1 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 4adf79e..a5dbc62 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -29,6 +29,9 @@
/* The registers */
#define QUADSPI_MCR 0x00
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT 29
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK \
+ (1 << MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT)
#define QUADSPI_MCR_RESERVED_SHIFT 16
#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT)
#define QUADSPI_MCR_MDIS_SHIFT 14
@@ -292,7 +295,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
for (i = 0; i < QUADSPI_LUT_NUM; i++)
writel(0, base + QUADSPI_LUT_BASE + i * 4);
- /* Quad Read */
+ /* Quad Read and DDR Quad Read*/
lut_base = SEQID_QUAD_READ * 4;
op = nor->read_opcode;
dm = nor->read_dummy;
@@ -307,6 +310,24 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
} else {
dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
}
+ } else if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ if (op == SPINOR_OP_READ_1_4_4_D ||
+ op == SPINOR_OP_READ4_1_4_4_D) {
+ /* read mode : 1-4-4, such as Spansion s25fl128s. */
+ writel(LUT0(CMD, PAD1, op)
+ | LUT1(ADDR_DDR, PAD4, addrlen),
+ base + QUADSPI_LUT(lut_base));
+
+ writel(LUT0(MODE_DDR, PAD4, 0xff)
+ | LUT1(DUMMY, PAD1, dm),
+ base + QUADSPI_LUT(lut_base + 1));
+
+ writel(LUT0(READ_DDR, PAD4, rxfifo)
+ | LUT1(JMP_ON_CS, PAD1, 0),
+ base + QUADSPI_LUT(lut_base + 2));
+ } else {
+ dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ }
}
/* Write enable */
@@ -368,6 +389,9 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
+ case SPINOR_OP_READ_1_4_4_D:
+ case SPINOR_OP_READ4_1_4_4_D:
+ case SPINOR_OP_READ4_1_1_4:
case SPINOR_OP_READ_1_1_4:
return SEQID_QUAD_READ;
case SPINOR_OP_WREN:
@@ -558,6 +582,8 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
+ struct spi_nor *nor = &q->nor[0];
+ u32 reg, reg2;
int seqid;
/* AHB configuration for access buffer 0/1/2 .*/
@@ -572,9 +598,30 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
writel(0, base + QUADSPI_BUF2IND);
/* Set the default lut sequence for AHB Read. */
- seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ seqid = fsl_qspi_get_seqid(q, nor->read_opcode);
writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ /* enable the DDR quad read */
+ if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ reg = readl(q->iobase + QUADSPI_MCR);
+
+ /* Firstly, disable the module */
+ writel(reg | QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+
+ /* Set the Sampling Register for DDR */
+ reg2 = readl(q->iobase + QUADSPI_SMPR);
+ reg2 &= ~QUADSPI_SMPR_DDRSMP_MASK;
+ reg2 |= (2 << QUADSPI_SMPR_DDRSMP_SHIFT);
+ writel(reg2, q->iobase + QUADSPI_SMPR);
+
+ /* Enable the module again (enable the DDR too) */
+ reg |= QUADSPI_MCR_DDR_EN_MASK;
+ if (is_imx6sx_qspi(q))
+ reg |= MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK;
+
+ writel(reg, q->iobase + QUADSPI_MCR);
+ }
}
/* We use this function to do some basic init for spi_nor_scan(). */
@@ -863,7 +910,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
const struct spi_device_id *id;
+ enum read_mode mode = SPI_NOR_QUAD;
char modalias[40];
+ u32 dummy = 0;
/* skip the holes */
if (!has_second_chip)
@@ -874,6 +923,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
nor->mtd = mtd;
nor->dev = dev;
+ nor->np = np;
nor->priv = q;
mtd->priv = nor;
@@ -899,10 +949,16 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (ret < 0)
goto map_failed;
+ /* Can we enable the DDR Quad Read? */
+ ret = of_property_read_u32(np, "spi-nor,ddr-quad-read-dummy",
+ &dummy);
+ if (!ret && dummy > 0)
+ mode = SPI_NOR_DDR_QUAD;
+
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, id, mode);
if (ret)
goto map_failed;
--
1.7.2.rc3
WARNING: multiple messages have this Message-ID (diff)
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR
Date: Mon, 28 Apr 2014 11:53:44 +0800 [thread overview]
Message-ID: <1398657227-20721-8-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1398657227-20721-1-git-send-email-b32955@freescale.com>
Add the DDR quad read support for the fsl-quadspi driver.
Check the "spi-nor,ddr-quad-read-dummy" DT property, if the DT node is exit,
it means we could enable the DDR quad read.
(1) Test this patch with imx6sx-sdb board (Spansion s25fl128s)
The clock rate is 66MHz.
(2) The information of NOR flash:
-----------------------------------------------
root at imx6qdlsolo:~# mtdinfo /dev/mtd0
mtd0
Name: 21e4000.qspi
Type: nor
Eraseblock size: 65536 bytes, 64.0 KiB
Amount of eraseblocks: 256 (16777216 bytes, 16.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:0
Bad blocks are allowed: false
Device is writable: true
-----------------------------------------------
(3) Test this patch set with UBIFS & bonnie++:
-----------------------------------------------
ubiattach /dev/ubi_ctrl -m 0
ubimkvol /dev/ubi0 -N test -m
mount -t ubifs ubi0:test tmp
bonnie++ -d tmp -u 0 -s 10 -r 5
-----------------------------------------------
(4) Test this patch with mtd_speedtest.ko
root at imx6qdlsolo:~# insmod mtd_speedtest.ko dev=0
=================================================
mtd_speedtest: MTD device: 0
mtd_speedtest: not NAND flash, assume page size is 512 bytes.
mtd_speedtest: MTD device size 16777216, eraseblock size 65536, page size 512,
count of eraseblocks 256, pages per eraseblock 128, OOB size 0
mtd_speedtest: testing eraseblock write speed
mtd_speedtest: eraseblock write speed is 665 KiB/s
mtd_speedtest: testing eraseblock read speed
mtd_speedtest: eraseblock read speed is 49799 KiB/s
mtd_speedtest: testing page write speed
mtd_speedtest: page write speed is 662 KiB/s
mtd_speedtest: testing page read speed
mtd_speedtest: page read speed is 24236 KiB/s
mtd_speedtest: testing 2 page write speed
mtd_speedtest: 2 page write speed is 657 KiB/s
mtd_speedtest: testing 2 page read speed
mtd_speedtest: 2 page read speed is 32637 KiB/s
mtd_speedtest: Testing erase speed
mtd_speedtest: erase speed is 518 KiB/s
mtd_speedtest: Testing 2x multi-block erase speed
mtd_speedtest: 2x multi-block erase speed is 506 KiB/s
mtd_speedtest: Testing 4x multi-block erase speed
mtd_speedtest: 4x multi-block erase speed is 503 KiB/s
mtd_speedtest: Testing 8x multi-block erase speed
mtd_speedtest: 8x multi-block erase speed is 501 KiB/s
mtd_speedtest: Testing 16x multi-block erase speed
mtd_speedtest: 16x multi-block erase speed is 498 KiB/s
mtd_speedtest: Testing 32x multi-block erase speed
mtd_speedtest: 32x multi-block erase speed is 496 KiB/s
mtd_speedtest: Testing 64x multi-block erase speed
mtd_speedtest: 64x multi-block erase speed is 495 KiB/s
mtd_speedtest: finished
=================================================
(5) Conclusion:
The DDR quad read could be 49799 KiB/s.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 62 +++++++++++++++++++++++++++++++++++--
1 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 4adf79e..a5dbc62 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -29,6 +29,9 @@
/* The registers */
#define QUADSPI_MCR 0x00
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT 29
+#define MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK \
+ (1 << MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_SHIFT)
#define QUADSPI_MCR_RESERVED_SHIFT 16
#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT)
#define QUADSPI_MCR_MDIS_SHIFT 14
@@ -292,7 +295,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
for (i = 0; i < QUADSPI_LUT_NUM; i++)
writel(0, base + QUADSPI_LUT_BASE + i * 4);
- /* Quad Read */
+ /* Quad Read and DDR Quad Read*/
lut_base = SEQID_QUAD_READ * 4;
op = nor->read_opcode;
dm = nor->read_dummy;
@@ -307,6 +310,24 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
} else {
dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
}
+ } else if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ if (op == SPINOR_OP_READ_1_4_4_D ||
+ op == SPINOR_OP_READ4_1_4_4_D) {
+ /* read mode : 1-4-4, such as Spansion s25fl128s. */
+ writel(LUT0(CMD, PAD1, op)
+ | LUT1(ADDR_DDR, PAD4, addrlen),
+ base + QUADSPI_LUT(lut_base));
+
+ writel(LUT0(MODE_DDR, PAD4, 0xff)
+ | LUT1(DUMMY, PAD1, dm),
+ base + QUADSPI_LUT(lut_base + 1));
+
+ writel(LUT0(READ_DDR, PAD4, rxfifo)
+ | LUT1(JMP_ON_CS, PAD1, 0),
+ base + QUADSPI_LUT(lut_base + 2));
+ } else {
+ dev_err(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+ }
}
/* Write enable */
@@ -368,6 +389,9 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
+ case SPINOR_OP_READ_1_4_4_D:
+ case SPINOR_OP_READ4_1_4_4_D:
+ case SPINOR_OP_READ4_1_1_4:
case SPINOR_OP_READ_1_1_4:
return SEQID_QUAD_READ;
case SPINOR_OP_WREN:
@@ -558,6 +582,8 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
{
void __iomem *base = q->iobase;
+ struct spi_nor *nor = &q->nor[0];
+ u32 reg, reg2;
int seqid;
/* AHB configuration for access buffer 0/1/2 .*/
@@ -572,9 +598,30 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
writel(0, base + QUADSPI_BUF2IND);
/* Set the default lut sequence for AHB Read. */
- seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
+ seqid = fsl_qspi_get_seqid(q, nor->read_opcode);
writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
+
+ /* enable the DDR quad read */
+ if (nor->flash_read == SPI_NOR_DDR_QUAD) {
+ reg = readl(q->iobase + QUADSPI_MCR);
+
+ /* Firstly, disable the module */
+ writel(reg | QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+
+ /* Set the Sampling Register for DDR */
+ reg2 = readl(q->iobase + QUADSPI_SMPR);
+ reg2 &= ~QUADSPI_SMPR_DDRSMP_MASK;
+ reg2 |= (2 << QUADSPI_SMPR_DDRSMP_SHIFT);
+ writel(reg2, q->iobase + QUADSPI_SMPR);
+
+ /* Enable the module again (enable the DDR too) */
+ reg |= QUADSPI_MCR_DDR_EN_MASK;
+ if (is_imx6sx_qspi(q))
+ reg |= MX6SX_QUADSPI_MCR_TX_DDR_DELAY_EN_MASK;
+
+ writel(reg, q->iobase + QUADSPI_MCR);
+ }
}
/* We use this function to do some basic init for spi_nor_scan(). */
@@ -863,7 +910,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
const struct spi_device_id *id;
+ enum read_mode mode = SPI_NOR_QUAD;
char modalias[40];
+ u32 dummy = 0;
/* skip the holes */
if (!has_second_chip)
@@ -874,6 +923,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
nor->mtd = mtd;
nor->dev = dev;
+ nor->np = np;
nor->priv = q;
mtd->priv = nor;
@@ -899,10 +949,16 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (ret < 0)
goto map_failed;
+ /* Can we enable the DDR Quad Read? */
+ ret = of_property_read_u32(np, "spi-nor,ddr-quad-read-dummy",
+ &dummy);
+ if (!ret && dummy > 0)
+ mode = SPI_NOR_DDR_QUAD;
+
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, id, mode);
if (ret)
goto map_failed;
--
1.7.2.rc3
next prev parent reply other threads:[~2014-04-28 3:53 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-28 3:53 [PATCH v2 00/10] mtd: spi-nor: Add the DDR quad read support Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 03/10] mtd: spi-nor: add " Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 20:23 ` Marek Vasut
2014-04-28 20:23 ` Marek Vasut
2014-04-28 20:23 ` Marek Vasut
2014-07-30 5:08 ` Brian Norris
2014-07-30 5:08 ` Brian Norris
2014-07-30 5:08 ` Brian Norris
2014-07-30 6:44 ` Huang Shijie
2014-07-30 6:44 ` Huang Shijie
2014-07-30 6:44 ` Huang Shijie
2014-07-30 7:45 ` Brian Norris
2014-07-30 7:45 ` Brian Norris
2014-07-30 7:45 ` Brian Norris
2014-07-30 10:46 ` Mark Brown
2014-07-30 10:46 ` Mark Brown
2014-07-30 10:46 ` Mark Brown
2014-08-02 2:06 ` Brian Norris
2014-08-02 2:06 ` Brian Norris
2014-08-02 2:06 ` Brian Norris
2014-08-02 9:09 ` Geert Uytterhoeven
2014-08-02 9:09 ` Geert Uytterhoeven
2014-08-02 9:09 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWxzKG1TTUVgYqfRP0Prp85HPwVxH7NQp7S-pNeLfFqjA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-08-04 14:25 ` Mark Brown
2014-08-04 14:25 ` Mark Brown
2014-08-04 14:25 ` Mark Brown
2015-07-22 18:15 ` Zhi Li
2015-07-22 18:15 ` Zhi Li
2015-07-22 18:18 ` Zhi Li
2015-07-22 18:18 ` Zhi Li
2014-07-30 15:23 ` Huang Shijie
2014-07-30 15:23 ` Huang Shijie
2014-07-30 15:23 ` Huang Shijie
[not found] ` <1398657227-20721-1-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-04-28 3:53 ` [PATCH v2 01/10] mtd: spi-nor: fix the wrong dummy value Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
[not found] ` <1398657227-20721-2-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-04-28 20:22 ` Marek Vasut
2014-04-28 20:22 ` Marek Vasut
2014-04-28 20:22 ` Marek Vasut
2014-11-05 8:27 ` Brian Norris
2014-11-05 8:27 ` Brian Norris
2014-11-05 8:27 ` Brian Norris
2014-04-28 3:53 ` [PATCH v2 02/10] mtd: spi-nor: add a new field for spi_nor{} Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
[not found] ` <1398657227-20721-3-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-04-28 20:23 ` Marek Vasut
2014-04-28 20:23 ` Marek Vasut
2014-04-28 20:23 ` Marek Vasut
[not found] ` <201404282223.26174.marex-ynQEQJNshbs@public.gmane.org>
2014-04-29 5:18 ` Huang Shijie
2014-04-29 5:18 ` Huang Shijie
2014-04-29 5:18 ` Huang Shijie
2014-04-29 5:18 ` Huang Shijie
2014-04-29 6:54 ` Marek Vasut
2014-04-29 6:54 ` Marek Vasut
2014-04-29 6:54 ` Marek Vasut
2014-04-29 6:05 ` Huang Shijie
2014-04-29 6:05 ` Huang Shijie
2014-04-29 6:05 ` Huang Shijie
2014-04-29 6:05 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 04/10] Documentation: mtd: add a new document for SPI NOR flash Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 05/10] Documentation: fsl-quadspi: update the document Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 06/10] mtd: fsl-quadspi: use the information stored in spi-nor{} Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie [this message]
2014-04-28 3:53 ` [PATCH v2 07/10] mtd: fsl-quadspi: add the DDR quad read support for Spansion NOR Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 08/10] mtd: spi-nor: add more read transfer flags for n25q256a Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 09/10] mtd: spi-nor: add DDR quad read support for Micron Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` [PATCH v2 10/10] mtd: fsl-quadspi: " Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
2014-04-28 3:53 ` Huang Shijie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398657227-20721-8-git-send-email-b32955@freescale.com \
--to=b32955-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.