From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Guo Ren <guoren@kernel.org>
Cc: Jisheng Zhang <jszhang@kernel.org>,
Atish Patra <atishp@rivosinc.com>,
Anup Patel <apatel@ventanamicro.com>,
Andrew Jones <ajones@ventanamicro.com>,
Nathan Chancellor <nathan@kernel.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v4 6/7] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller
Date: Fri, 25 Nov 2022 09:16:09 +0100 [thread overview]
Message-ID: <70d1bfde-f57f-1741-08d3-23e362793595@linaro.org> (raw)
In-Reply-To: <20221124172207.153718-7-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 24/11/2022 18:22, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Add DT binding documentation for L2 cache controller found on RZ/Five SoC.
>
> The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
> Single) from Andes. The AX45MP core has an L2 cache controller, this patch
> describes the L2 cache block.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v3 -> v4
> * Dropped l2 cache configuration parameters
> * s/larger/large
> * Added minItems/maxItems for andestech,pma-regions
> ---
> .../cache/andestech,ax45mp-cache.yaml | 93 +++++++++++++++++++
> .../cache/andestech,ax45mp-cache.h | 38 ++++++++
> 2 files changed, 131 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
> create mode 100644 include/dt-bindings/cache/andestech,ax45mp-cache.h
>
> diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
> new file mode 100644
> index 000000000000..bf255b177d0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/cache/andestech,ax45mp-cache.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Andestech AX45MP L2 Cache Controller
> +
> +maintainers:
> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> + A level-2 cache (L2C) is used to improve the system performance by providing
> + a large amount of cache line entries and reasonable access delays. The L2C
> + is shared between cores, and a non-inclusive non-exclusive policy is used.
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - andestech,ax45mp-cache
> +
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - const: andestech,ax45mp-cache
> + - const: cache
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + cache-line-size:
> + const: 64
> +
> + cache-level:
> + const: 2
> +
> + cache-sets:
> + const: 1024
> +
> + cache-size:
> + enum: [131072, 262144, 524288, 1048576, 2097152]
> +
> + cache-unified: true
> +
> + next-level-cache: true
> +
> + andestech,pma-regions:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + minItems: 1
> + maxItems: 16
> + items:
> + minItems: 3
> + maxItems: 3
Instead:
items:
items:
- description: Explain
- description: what is
- description: here
> + description: Optional array of memory regions to be set in the PMA.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - cache-line-size
> + - cache-level
> + - cache-sets
> + - cache-size
> + - cache-unified
> + - interrupts
> + - reg
Keep the same order as properties appear in the "properties:"
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/cache/andestech,ax45mp-cache.h>
> +
> + cache-controller@2010000 {
> + reg = <0x13400000 0x100000>;
> + compatible = "andestech,ax45mp-cache", "cache";
> + interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
> + cache-line-size = <64>;
> + cache-level = <2>;
> + cache-sets = <1024>;
> + cache-size = <262144>;
> + cache-unified;
> + andestech,pma-regions = <0x58000000 0x08000000
> + (AX45MP_PMACFG_ETYP_NAPOT | AX45MP_PMACFG_MTYP_MEM_NON_CACHE_BUF)>;
> + };
> diff --git a/include/dt-bindings/cache/andestech,ax45mp-cache.h b/include/dt-bindings/cache/andestech,ax45mp-cache.h
> new file mode 100644
> index 000000000000..aa1cad24075d
> --- /dev/null
> +++ b/include/dt-bindings/cache/andestech,ax45mp-cache.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * This header provides constants for Andes AX45MP PMA configuration
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + */
> +
> +#ifndef __DT_BINDINGS_ANDESTECH_AX45MP_CACHE_H
> +#define __DT_BINDINGS_ANDESTECH_AX45MP_CACHE_H
> +
> +/* OFF: PMA entry is disabled */
> +#define AX45MP_PMACFG_ETYP_DISABLED 0
> +/* Naturally aligned power of 2 region */
> +#define AX45MP_PMACFG_ETYP_NAPOT 3
> +
> +/* Device, Non-bufferable */
> +#define AX45MP_PMACFG_MTYP_DEV_NON_BUF (0 << 2)
> +/* Device, bufferable */
> +#define AX45MP_PMACFG_MTYP_DEV_BUF (1 << 2)
> +/* Memory, Non-cacheable, Non-bufferable */
> +#define AX45MP_PMACFG_MTYP_MEM_NON_CACHE_NON_BUF (2 << 2)
> +/* Memory, Non-cacheable, Bufferable */
> +#define AX45MP_PMACFG_MTYP_MEM_NON_CACHE_BUF (3 << 2)
What are all these? They don't look like flags, because 3 = 1 | 2...
they don't look like constants, because we do not use shifts in
constants. Are these some register values? I also do not see the header
being used in the code, so why having a bindings header if it is not
used (DTS is not usage...)?
> +/* Memory, Write-back, No-allocate */
> +#define AX45MP_PMACFG_MTYP_MEM_WB_NA (8 << 2)
> +/* Memory, Write-back, Read-allocate */
> +#define AX45MP_PMACFG_MTYP_MEM_WB_RA (9 << 2)
> +/* Memory, Write-back, Write-allocate */
> +#define AX45MP_PMACFG_MTYP_MEM_WB_WA (10 << 2)
> +/* Memory, Write-back, Read and Write-allocate */
> +#define AX45MP_PMACFG_MTYP_MEM_WB_R_WA (11 << 2)
> +
> +/* AMO instructions are supported */
> +#define AX45MP_PMACFG_NAMO_AMO_SUPPORT (0 << 6)
> +/* AMO instructions are not supported */
> +#define AX45MP_PMACFG_NAMO_AMO_NO_SUPPORT (1 << 6)
> +
> +#endif /* __DT_BINDINGS_ANDESTECH_AX45MP_CACHE_H */
Best regards,
Krzysztof
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-11-25 8:16 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-24 17:22 [PATCH v4 0/7] AX45MP: Add support to non-coherent DMA Prabhakar
2022-11-24 17:22 ` [PATCH v4 1/7] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Prabhakar
2022-11-24 18:06 ` Heiko Stübner
2022-11-24 19:52 ` Conor Dooley
2022-11-24 19:58 ` Heiko Stübner
2022-11-24 20:05 ` Conor Dooley
2022-11-24 20:08 ` Conor Dooley
2022-11-24 20:44 ` Heiko Stübner
2022-11-25 11:44 ` Andrew Jones
2022-11-25 10:02 ` Lad, Prabhakar
2022-11-25 10:20 ` Heiko Stübner
2022-11-25 10:36 ` Lad, Prabhakar
2022-11-24 17:22 ` [PATCH v4 2/7] riscv: asm: vendorid_list: Add Andes Technology to the vendors list Prabhakar
2022-11-24 18:06 ` Heiko Stübner
2022-11-24 20:09 ` Conor Dooley
2022-11-24 17:22 ` [PATCH v4 3/7] riscv: errata: Add Andes alternative ports Prabhakar
2022-11-24 18:24 ` Heiko Stübner
2022-11-24 19:14 ` Lad, Prabhakar
2022-11-24 20:21 ` Conor Dooley
2022-11-25 10:08 ` Lad, Prabhakar
2022-11-24 17:22 ` [PATCH DO NOT REVIEW v4 4/7] riscv: errata: andes: Fix auipc-jalr addresses in patched alternatives Prabhakar
2022-11-25 1:08 ` Guo Ren
2022-11-25 10:10 ` Lad, Prabhakar
2022-11-24 17:22 ` [PATCH v4 5/7] riscv: mm: dma-noncoherent: Pass direction and operation to ALT_CMO_OP() Prabhakar
2022-11-24 18:29 ` Heiko Stübner
2022-11-24 19:18 ` Lad, Prabhakar
2022-11-25 18:49 ` Samuel Holland
2022-11-25 20:53 ` Lad, Prabhakar
2022-11-24 17:22 ` [PATCH v4 6/7] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller Prabhakar
2022-11-25 8:16 ` Krzysztof Kozlowski [this message]
2022-11-25 10:34 ` Lad, Prabhakar
2022-11-25 11:17 ` Geert Uytterhoeven
2022-11-25 11:45 ` Lad, Prabhakar
2022-11-25 12:12 ` Krzysztof Kozlowski
2022-11-25 12:25 ` Conor Dooley
2022-11-25 12:51 ` Lad, Prabhakar
2022-11-25 13:24 ` Conor Dooley
2022-11-25 15:55 ` Krzysztof Kozlowski
2022-11-25 16:50 ` Conor Dooley
2022-11-25 18:18 ` Lad, Prabhakar
2022-11-24 17:22 ` [PATCH v4 7/7] soc: renesas: Add L2 cache management for RZ/Five SoC Prabhakar
2022-11-24 18:30 ` Heiko Stübner
2022-11-24 19:56 ` Lad, Prabhakar
2022-11-24 20:47 ` Heiko Stübner
2022-11-24 21:31 ` Conor Dooley
2022-11-24 21:34 ` Conor Dooley
2022-11-25 10:50 ` Lad, Prabhakar
2022-11-25 12:16 ` Conor Dooley
2022-11-25 19:43 ` Samuel Holland
2022-11-26 21:09 ` Lad, Prabhakar
2022-11-27 9:55 ` Geert Uytterhoeven
2022-11-28 12:08 ` Lad, Prabhakar
2022-11-29 5:48 ` Samuel Holland
2022-11-29 5:58 ` Samuel Holland
2022-12-01 11:30 ` Lad, Prabhakar
2022-11-24 19:41 ` [PATCH v4 0/7] AX45MP: Add support to non-coherent DMA Conor Dooley
2022-11-24 19:52 ` Lad, Prabhakar
2022-11-24 19:59 ` Conor Dooley
2022-11-25 9:04 ` Geert Uytterhoeven
2022-11-25 10:51 ` Lad, Prabhakar
2022-12-01 23:36 ` Conor Dooley
2022-12-02 9:38 ` Lad, Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=70d1bfde-f57f-1741-08d3-23e362793595@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=ajones@ventanamicro.com \
--cc=aou@eecs.berkeley.edu \
--cc=apatel@ventanamicro.com \
--cc=atishp@rivosinc.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=magnus.damm@gmail.com \
--cc=nathan@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=philipp.tomsich@vrull.eu \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).