* Audio crackles with 4.1-rc1 @ 2015-04-28 11:21 Jonathan McDowell 2015-04-28 12:00 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-04-28 11:21 UTC (permalink / raw) To: Takashi Iwai, alsa-devel; +Cc: linux-kernel Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at regular intervals. I'm fairly sure this is due to the HDA power save as once audio is playing things are fine, it's just when starting to play audio that I hear the crackle. System is a Dell Latitude E7240. I haven't tried a bisect yet but will attempt to find some time to do so in the next few days. It looks like there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll concentrate on those first. Hopefully relevant dmesg output for the device: [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 I have: CONFIG_SND_HDA_POWER_SAVE_DEFAULT=600 set in my kernel config. There's no dmesg output around the times when the crackling is occurring. J. -- Friends are God's apology for relations. ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-28 11:21 Audio crackles with 4.1-rc1 Jonathan McDowell @ 2015-04-28 12:00 ` Takashi Iwai 2015-04-28 12:35 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-04-28 12:00 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Tue, 28 Apr 2015 12:21:57 +0100, Jonathan McDowell wrote: > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at > regular intervals. I'm fairly sure this is due to the HDA power save as > once audio is playing things are fine, it's just when starting to play > audio that I hear the crackle. > > System is a Dell Latitude E7240. I haven't tried a bisect yet but will > attempt to find some time to do so in the next few days. It looks like > there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll > concentrate on those first. > > Hopefully relevant dmesg output for the device: > > [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) > [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) > [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 > [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 > [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 > [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 > [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 > [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 > [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 > > I have: > > CONFIG_SND_HDA_POWER_SAVE_DEFAULT=600 > > set in my kernel config. There's no dmesg output around the times when > the crackling is occurring. There are lots of code changes and enhancements wrt power saving in 4.1, and bisection won't help so much, I'm afraid. First off, check the device status while you hear crackles. Is the codec in runtime suspend (aka power save)? This can be seen in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check the runtime status of the controller, too, found in /sys/class/sound/card?/device/power/runtime_status. And, take alsa-info.sh output snapshot while the noise. Run the script with --no-upload option and attach the output file. Also, take alsa-info.sh output on 4.0 kernel for comparison, too. At best, take a snapshot in the similar situation (in power save, etc). The possibly affecting change was the support of widget power saving. For disabling it, try to comment out the line codec->power_save_node = 1; in patch_alc269() in sound/pci/hda/patch_realtek.c. Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-28 12:00 ` Takashi Iwai @ 2015-04-28 12:35 ` Jonathan McDowell 2015-04-28 13:05 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-04-28 12:35 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2514 bytes --] On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > At Tue, 28 Apr 2015 12:21:57 +0100, > Jonathan McDowell wrote: > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at > > regular intervals. I'm fairly sure this is due to the HDA power save as > > once audio is playing things are fine, it's just when starting to play > > audio that I hear the crackle. > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet but will > > attempt to find some time to do so in the next few days. It looks like > > there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll > > concentrate on those first. > > > There are lots of code changes and enhancements wrt power saving in > 4.1, and bisection won't help so much, I'm afraid. > > First off, check the device status while you hear crackles. > Is the codec in runtime suspend (aka power save)? This can be seen in > /sys/bus/hdaudio/devices/*/power/runtime_status. Then check the > runtime status of the controller, too, found in > /sys/class/sound/card?/device/power/runtime_status. The cracking is definitely happening with the transition from suspended to active: /sys/class/sound/card0/device/power/runtime_status:suspended /sys/class/sound/card1/device/power/runtime_status:active /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active card1 + C1D0 were suspended, I hit delete in a terminal to force a terminal bell, got the crackle and the state changed to active as above. > And, take alsa-info.sh output snapshot while the noise. Run the > script with --no-upload option and attach the output file. Also, take > alsa-info.sh output on 4.0 kernel for comparison, too. At best, take > a snapshot in the similar situation (in power save, etc). Unfortunately the crackle is really very brief so it's difficult to catch it in the act. I've attached the alsa-info.sh output from when the above is reporting suspended and then when it's reporting active. > The possibly affecting change was the support of widget power saving. > For disabling it, try to comment out the line > codec->power_save_node = 1; > in patch_alc269() in sound/pci/hda/patch_realtek.c. I'll try this out but it's probably going to be at least tomorrow before I have time. J. -- xmpp:noodles@earth.li 101 things you can't have too much of : 10 - CDs. [-- Attachment #2: alsa-info.txt.suspended --] [-- Type: text/plain, Size: 40238 bytes --] upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Tue Apr 28 12:29:47 UTC 2015 !!Linux Distribution !!------------------ Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/" !!DMI Information !!--------------- Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14 !!Kernel Information !!------------------ Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7e34000 irq 48 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e30000 irq 47 !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0a0c (rev 0b) Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862807 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Control: name="ELD", index=0, device=7 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Control: name="ELD", index=0, device=8 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Realtek ALC3226 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0292 Subsystem Id: 0x102805ca Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x3f 0x3f] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Dock Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Dock Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Headset Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Headset Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Dock Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Dock Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x01a19030: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Headset Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Headset Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=124 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 28 13:29 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Apr 27 23:24 . drwxr-xr-x 3 root root 280 Apr 27 23:24 .. lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # pcm.bluetooth { # type plug # slave { # pcm "bluetooth_hw" # } # } # pcm.bluetooth_hw { # type bluetooth # device 00:02:3C:27:1A:0E # profile "auto" # } pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse # If defaults.namehint.showall is set to off in alsa.conf, then this is # necessary to make this pcm show up in the list returned by # snd_device_name_hint or aplay -L hint.description "Default Audio Device" } ctl.!default { type pulse } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,00100000' Controls : 21 Simple ctrls : 3 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47' Mixer name : 'Realtek ALC3226' Components : 'HDA:10ec0292,102805ca,00100001' Controls : 29 Simple ctrls : 15 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 64 [74%] [-17.25dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 0 [0%] [-65.25dB] [off] Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'Speaker',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Speaker+LO',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] Front Right: Playback 87 [100%] [0.00dB] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Line Out',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 63 Front Left: Capture 63 [100%] [30.00dB] [on] Front Right: Capture 63 [100%] [30.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker' Item0: 'Line Out+Speaker' Simple mixer control 'Dock Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Dock Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Headset Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Headset Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Internal Mic',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 1 [33%] [12.00dB] Front Right: 1 [33%] [12.00dB] !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.20 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.21 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.PCH { control.1 { iface MIXER name 'Speaker+LO Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Line Out Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Headphone Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 dbvalue.1 -6525 } } control.4 { iface MIXER name 'Headphone Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.6 { iface MIXER name 'Dock Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.7 { iface MIXER name 'Dock Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.8 { iface MIXER name 'Headset Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.9 { iface MIXER name 'Headset Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Auto-Mute Mode' value 'Line Out+Speaker' comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 'Speaker Only' item.2 'Line Out+Speaker' } } control.11 { iface MIXER name 'Capture Source' value 'Internal Mic' comment { access 'read write' type ENUMERATED count 1 item.0 'Dock Mic' item.1 'Headset Mic' item.2 'Internal Mic' } } control.12 { iface MIXER name 'Capture Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -1725 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.13 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Dock Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 0 dbvalue.1 0 } } control.15 { iface MIXER name 'Headset Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.16 { iface MIXER name 'Internal Mic Boost Volume' value.0 1 value.1 1 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 1200 dbvalue.1 1200 } } control.17 { iface MIXER name 'Master Playback Volume' value 64 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -1725 } } control.18 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.19 { iface CARD name 'Dock Mic Jack' value false comment { access read type BOOLEAN count 1 } } control.20 { iface CARD name 'Headset Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.21 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.22 { iface CARD name 'Dock Line Out Jack' value false comment { access read type BOOLEAN count 1 } } control.23 { iface CARD name 'Front Headphone Jack' value false comment { access read type BOOLEAN count 1 } } control.24 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.25 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.26 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.27 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.28 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.29 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module msr cpufreq_stats ctr ccm binfmt_misc bnep nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 joydev qmi_wwan cdc_mbim btusb btintel intel_rapl iosf_mbi cdc_ncm bluetooth cdc_wdm x86_pkg_temp_thermal intel_powerclamp usbnet pcspkr mii tpm_tis iwlmvm mac80211 8250 serial_core iwlwifi snd_hda_codec_hdmi psmouse snd_hda_codec_realtek cfg80211 efivars serio_raw snd_hda_codec_generic hid_multitouch i2c_i801 battery ac snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_hda_core evdev snd_pcm snd_timer processor md_mod tpm_rng tpm rng_core fuse autofs4 algif_skcipher af_alg hid_generic usbhid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sg ehci_pci sdhci_pci ehci_hcd xhci_pci xhci_hcd thermal sdhci_acpi sdhci mmc_core i2c_hid hid !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x05 0x18560010 0x06 0x18560010 0x07 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60140 0x13 0x411111f0 0x14 0x90170110 0x15 0x0221401f 0x16 0x01014020 0x18 0x411111f0 0x19 0x01a19030 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40700001 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: 0x16 0x21014020 0x19 0x21a19030 0x1a 0x01a1913c /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [-- Attachment #3: alsa-info.txt.active --] [-- Type: text/plain, Size: 40238 bytes --] upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Tue Apr 28 12:29:27 UTC 2015 !!Linux Distribution !!------------------ Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/" !!DMI Information !!--------------- Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14 !!Kernel Information !!------------------ Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7e34000 irq 48 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e30000 irq 47 !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0a0c (rev 0b) Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862807 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Control: name="ELD", index=0, device=7 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Control: name="ELD", index=0, device=8 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Realtek ALC3226 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0292 Subsystem Id: 0x102805ca Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x3f 0x3f] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Dock Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Dock Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Headset Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Headset Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Dock Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Dock Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x01a19030: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Headset Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Headset Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=124 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 28 13:29 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Apr 27 23:24 . drwxr-xr-x 3 root root 280 Apr 27 23:24 .. lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # pcm.bluetooth { # type plug # slave { # pcm "bluetooth_hw" # } # } # pcm.bluetooth_hw { # type bluetooth # device 00:02:3C:27:1A:0E # profile "auto" # } pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse # If defaults.namehint.showall is set to off in alsa.conf, then this is # necessary to make this pcm show up in the list returned by # snd_device_name_hint or aplay -L hint.description "Default Audio Device" } ctl.!default { type pulse } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,00100000' Controls : 21 Simple ctrls : 3 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47' Mixer name : 'Realtek ALC3226' Components : 'HDA:10ec0292,102805ca,00100001' Controls : 29 Simple ctrls : 15 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 64 [74%] [-17.25dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 0 [0%] [-65.25dB] [off] Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'Speaker',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Speaker+LO',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] Front Right: Playback 87 [100%] [0.00dB] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Line Out',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 63 Front Left: Capture 63 [100%] [30.00dB] [on] Front Right: Capture 63 [100%] [30.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker' Item0: 'Line Out+Speaker' Simple mixer control 'Dock Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Dock Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Headset Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Headset Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Internal Mic',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 1 [33%] [12.00dB] Front Right: 1 [33%] [12.00dB] !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.20 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.21 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.PCH { control.1 { iface MIXER name 'Speaker+LO Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Line Out Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Headphone Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 dbvalue.1 -6525 } } control.4 { iface MIXER name 'Headphone Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.6 { iface MIXER name 'Dock Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.7 { iface MIXER name 'Dock Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.8 { iface MIXER name 'Headset Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.9 { iface MIXER name 'Headset Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Auto-Mute Mode' value 'Line Out+Speaker' comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 'Speaker Only' item.2 'Line Out+Speaker' } } control.11 { iface MIXER name 'Capture Source' value 'Internal Mic' comment { access 'read write' type ENUMERATED count 1 item.0 'Dock Mic' item.1 'Headset Mic' item.2 'Internal Mic' } } control.12 { iface MIXER name 'Capture Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -1725 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.13 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Dock Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 0 dbvalue.1 0 } } control.15 { iface MIXER name 'Headset Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.16 { iface MIXER name 'Internal Mic Boost Volume' value.0 1 value.1 1 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 1200 dbvalue.1 1200 } } control.17 { iface MIXER name 'Master Playback Volume' value 64 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -1725 } } control.18 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.19 { iface CARD name 'Dock Mic Jack' value false comment { access read type BOOLEAN count 1 } } control.20 { iface CARD name 'Headset Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.21 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.22 { iface CARD name 'Dock Line Out Jack' value false comment { access read type BOOLEAN count 1 } } control.23 { iface CARD name 'Front Headphone Jack' value false comment { access read type BOOLEAN count 1 } } control.24 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.25 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.26 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.27 { iface PCM name 'Playback Channel Map' value.0 3 value.1 4 comment { access read type INTEGER count 2 range '0 - 36' } } control.28 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.29 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module msr cpufreq_stats ctr ccm binfmt_misc bnep nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 joydev qmi_wwan cdc_mbim btusb btintel intel_rapl iosf_mbi cdc_ncm bluetooth cdc_wdm x86_pkg_temp_thermal intel_powerclamp usbnet pcspkr mii tpm_tis iwlmvm mac80211 8250 serial_core iwlwifi snd_hda_codec_hdmi psmouse snd_hda_codec_realtek cfg80211 efivars serio_raw snd_hda_codec_generic hid_multitouch i2c_i801 battery ac snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_hda_core evdev snd_pcm snd_timer processor md_mod tpm_rng tpm rng_core fuse autofs4 algif_skcipher af_alg hid_generic usbhid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sg ehci_pci sdhci_pci ehci_hcd xhci_pci xhci_hcd thermal sdhci_acpi sdhci mmc_core i2c_hid hid !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x05 0x18560010 0x06 0x18560010 0x07 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60140 0x13 0x411111f0 0x14 0x90170110 0x15 0x0221401f 0x16 0x01014020 0x18 0x411111f0 0x19 0x01a19030 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40700001 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: 0x16 0x21014020 0x19 0x21a19030 0x1a 0x01a1913c /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-28 12:35 ` Jonathan McDowell @ 2015-04-28 13:05 ` Takashi Iwai 2015-04-28 14:43 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-04-28 13:05 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Tue, 28 Apr 2015 13:35:18 +0100, Jonathan McDowell wrote: > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > At Tue, 28 Apr 2015 12:21:57 +0100, > > Jonathan McDowell wrote: > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at > > > regular intervals. I'm fairly sure this is due to the HDA power save as > > > once audio is playing things are fine, it's just when starting to play > > > audio that I hear the crackle. > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet but will > > > attempt to find some time to do so in the next few days. It looks like > > > there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll > > > concentrate on those first. > > > > > There are lots of code changes and enhancements wrt power saving in > > 4.1, and bisection won't help so much, I'm afraid. > > > > First off, check the device status while you hear crackles. > > Is the codec in runtime suspend (aka power save)? This can be seen in > > /sys/bus/hdaudio/devices/*/power/runtime_status. Then check the > > runtime status of the controller, too, found in > > /sys/class/sound/card?/device/power/runtime_status. > > The cracking is definitely happening with the transition from suspended > to active: > > /sys/class/sound/card0/device/power/runtime_status:suspended > /sys/class/sound/card1/device/power/runtime_status:active > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > terminal bell, got the crackle and the state changed to active as above. Ah, so it's a click noise that happens only once per runtime PM transition? I thought it were constant crackling noises from your description ("regular intervals"). In anyway, please give alsa-info.sh output on both 4.0 and 4.1. Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-28 13:05 ` Takashi Iwai @ 2015-04-28 14:43 ` Takashi Iwai 2015-04-29 11:28 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-04-28 14:43 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Tue, 28 Apr 2015 15:05:20 +0200, Takashi Iwai wrote: > > At Tue, 28 Apr 2015 13:35:18 +0100, > Jonathan McDowell wrote: > > > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > > At Tue, 28 Apr 2015 12:21:57 +0100, > > > Jonathan McDowell wrote: > > > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio crackles at > > > > regular intervals. I'm fairly sure this is due to the HDA power save as > > > > once audio is playing things are fine, it's just when starting to play > > > > audio that I hear the crackle. > > > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet but will > > > > attempt to find some time to do so in the next few days. It looks like > > > > there have been some changes in sound/hda/ between 4.0 + 4.1-rc1 so I'll > > > > concentrate on those first. > > > > > > > There are lots of code changes and enhancements wrt power saving in > > > 4.1, and bisection won't help so much, I'm afraid. > > > > > > First off, check the device status while you hear crackles. > > > Is the codec in runtime suspend (aka power save)? This can be seen in > > > /sys/bus/hdaudio/devices/*/power/runtime_status. Then check the > > > runtime status of the controller, too, found in > > > /sys/class/sound/card?/device/power/runtime_status. > > > > The cracking is definitely happening with the transition from suspended > > to active: > > > > /sys/class/sound/card0/device/power/runtime_status:suspended > > /sys/class/sound/card1/device/power/runtime_status:active > > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > > terminal bell, got the crackle and the state changed to active as above. > > Ah, so it's a click noise that happens only once per runtime PM > transition? I thought it were constant crackling noises from your > description ("regular intervals"). > > In anyway, please give alsa-info.sh output on both 4.0 and 4.1. Also, does the click noise occur only at powering up, and not at powering down? Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-28 14:43 ` Takashi Iwai @ 2015-04-29 11:28 ` Jonathan McDowell 2015-04-29 11:54 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-04-29 11:28 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2715 bytes --] On Tue, Apr 28, 2015 at 04:43:00PM +0200, Takashi Iwai wrote: > At Tue, 28 Apr 2015 15:05:20 +0200, > Takashi Iwai wrote: > > At Tue, 28 Apr 2015 13:35:18 +0100, > > Jonathan McDowell wrote: > > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > > > At Tue, 28 Apr 2015 12:21:57 +0100, > > > > Jonathan McDowell wrote: > > > > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio > > > > > crackles at regular intervals. I'm fairly sure this is due to > > > > > the HDA power save as once audio is playing things are fine, > > > > > it's just when starting to play audio that I hear the crackle. > > > > > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet > > > > > but will attempt to find some time to do so in the next few > > > > > days. It looks like there have been some changes in sound/hda/ > > > > > between 4.0 + 4.1-rc1 so I'll concentrate on those first. > > > > > > > > > There are lots of code changes and enhancements wrt power saving > > > > in 4.1, and bisection won't help so much, I'm afraid. > > > > > > > > First off, check the device status while you hear crackles. Is > > > > the codec in runtime suspend (aka power save)? This can be seen > > > > in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check > > > > the runtime status of the controller, too, found in > > > > /sys/class/sound/card?/device/power/runtime_status. > > > > > > The cracking is definitely happening with the transition from suspended > > > to active: > > > > > > /sys/class/sound/card0/device/power/runtime_status:suspended > > > /sys/class/sound/card1/device/power/runtime_status:active > > > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > > > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > > > > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > > > terminal bell, got the crackle and the state changed to active as above. > > > > Ah, so it's a click noise that happens only once per runtime PM > > transition? I thought it were constant crackling noises from your > > description ("regular intervals"). > > > > In anyway, please give alsa-info.sh output on both 4.0 and 4.1. > > Also, does the click noise occur only at powering up, and not at > powering down? The click is only on the transition from suspended to active; not constantly during playback and not when transitioning from active to suspended. It doesn't appear 4.0 is doing the suspending at all; there are no /sys/bus/hdaudio/devices/*/power/runtime_status files and the card runtime_status is always active. alsa-info for 4.0 + 4.1-rc1 attached. J. -- If this isn't war, why is CNN massing on the border? [-- Attachment #2: alsa-info-4.0.txt --] [-- Type: text/plain, Size: 39887 bytes --] upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Wed Apr 29 11:22:46 UTC 2015 !!Linux Distribution !!------------------ Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/" !!DMI Information !!--------------- Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14 !!Kernel Information !!------------------ Kernel release: 4.0.0 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.0.0 Library version: 1.0.28 Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7e34000 irq 49 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e30000 irq 48 !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0a0c (rev 0b) Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862807 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=1, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D3, actual=D3 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D3, actual=D3 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Control: name="ELD", index=0, device=7 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Control: name="ELD", index=0, device=8 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Realtek ALC3226 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0292 Subsystem Id: 0x102805ca Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x3f 0x3f] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Dock Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Dock Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Headset Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Headset Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Dock Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Dock Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x01a19030: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Headset Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Headset Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=124 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 6 Apr 29 12:21 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 2 Apr 29 12:21 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 10 Apr 29 12:21 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 5 Apr 29 12:21 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 7 Apr 29 12:21 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 8 Apr 29 12:21 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 9 Apr 29 12:21 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 4 Apr 29 12:21 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 3 Apr 29 12:22 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 29 12:21 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Apr 29 12:21 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Apr 29 12:21 . drwxr-xr-x 3 root root 280 Apr 29 12:21 .. lrwxrwxrwx 1 root root 12 Apr 29 12:21 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 29 12:21 pci-0000:00:1b.0 -> ../controlC1 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # pcm.bluetooth { # type plug # slave { # pcm "bluetooth_hw" # } # } # pcm.bluetooth_hw { # type bluetooth # device 00:02:3C:27:1A:0E # profile "auto" # } pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse # If defaults.namehint.showall is set to off in alsa.conf, then this is # necessary to make this pcm show up in the list returned by # snd_device_name_hint or aplay -L hint.description "Default Audio Device" } ctl.!default { type pulse } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 49' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,00100000' Controls : 21 Simple ctrls : 3 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 48' Mixer name : 'Realtek ALC3226' Components : 'HDA:10ec0292,102805ca,00100001' Controls : 29 Simple ctrls : 15 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 64 [74%] [-17.25dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 0 [0%] [-65.25dB] [off] Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'Speaker',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Speaker+LO',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] Front Right: Playback 87 [100%] [0.00dB] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Line Out',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 63 Front Left: Capture 63 [100%] [30.00dB] [on] Front Right: Capture 63 [100%] [30.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker' Item0: 'Line Out+Speaker' Simple mixer control 'Dock Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Dock Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Headset Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Headset Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Internal Mic',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 1 [33%] [12.00dB] Front Right: 1 [33%] [12.00dB] !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.20 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.21 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.PCH { control.1 { iface MIXER name 'Speaker+LO Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Line Out Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Headphone Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 dbvalue.1 -6525 } } control.4 { iface MIXER name 'Headphone Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.6 { iface MIXER name 'Dock Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.7 { iface MIXER name 'Dock Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.8 { iface MIXER name 'Headset Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.9 { iface MIXER name 'Headset Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Auto-Mute Mode' value 'Line Out+Speaker' comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 'Speaker Only' item.2 'Line Out+Speaker' } } control.11 { iface MIXER name 'Capture Source' value 'Internal Mic' comment { access 'read write' type ENUMERATED count 1 item.0 'Dock Mic' item.1 'Headset Mic' item.2 'Internal Mic' } } control.12 { iface MIXER name 'Capture Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -1725 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.13 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Dock Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 0 dbvalue.1 0 } } control.15 { iface MIXER name 'Headset Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.16 { iface MIXER name 'Internal Mic Boost Volume' value.0 1 value.1 1 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 1200 dbvalue.1 1200 } } control.17 { iface MIXER name 'Master Playback Volume' value 64 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -1725 } } control.18 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.19 { iface CARD name 'Dock Mic Jack' value false comment { access read type BOOLEAN count 1 } } control.20 { iface CARD name 'Headset Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.21 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.22 { iface CARD name 'Dock Line Out Jack' value false comment { access read type BOOLEAN count 1 } } control.23 { iface CARD name 'Front Headphone Jack' value false comment { access read type BOOLEAN count 1 } } control.24 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.25 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.26 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.27 { iface PCM name 'Playback Channel Map' value.0 3 value.1 4 comment { access read type INTEGER count 2 range '0 - 36' } } control.28 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.29 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module ctr ccm binfmt_misc bnep nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 qmi_wwan joydev snd_hda_codec_hdmi iwlmvm snd_hda_codec_realtek mac80211 snd_hda_codec_generic intel_rapl iosf_mbi snd_hda_intel snd_hda_controller cdc_mbim x86_pkg_temp_thermal snd_hda_codec cdc_ncm iwlwifi snd_hwdep cdc_wdm intel_powerclamp usbnet psmouse snd_pcm serio_raw efivars mii btusb i2c_i801 cfg80211 pcspkr hid_multitouch bluetooth snd_timer tpm_tis battery 8250 serial_core ac evdev processor md_mod tpm_rng tpm rng_core fuse autofs4 algif_skcipher af_alg hid_generic usbhid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sg ehci_pci ehci_hcd sdhci_pci xhci_pci xhci_hcd thermal i2c_hid hid sdhci_acpi sdhci mmc_core !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x05 0x18560010 0x06 0x18560010 0x07 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60140 0x13 0x411111f0 0x14 0x90170110 0x15 0x0221401f 0x16 0x01014020 0x18 0x411111f0 0x19 0x01a19030 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40700001 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: 0x16 0x21014020 0x19 0x21a19030 0x1a 0x01a1913c /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 0.961306] PM: Hibernation image not present or could not be loaded. [ 0.961310] ALSA device list: [ 0.961310] No soundcards found. [ 1.347610] tsc: Refined TSC clocksource calibration: 2494.226 MHz -- [ 38.234184] usbcore: registered new interface driver btusb [ 38.235613] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 38.235735] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff818a9bc0) [ 38.239314] intel_rapl: Found RAPL domain package -- [ 38.239802] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 38.251672] sound hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 38.251675] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 38.251676] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 38.251677] sound hdaudioC1D0: mono: mono_out=0x0 [ 38.251678] sound hdaudioC1D0: inputs: [ 38.251680] sound hdaudioC1D0: Dock Mic=0x19 [ 38.251681] sound hdaudioC1D0: Headset Mic=0x1a [ 38.251682] sound hdaudioC1D0: Internal Mic=0x12 [ 38.257532] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 38.257652] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12 [ 38.257699] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled [ 38.257920] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled [ 38.258853] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 38.258924] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 38.258986] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 38.274556] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 38.274620] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 38.274673] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 38.276879] qmi_wwan 1-7:1.8: cdc-wdm2: USB WDM device [-- Attachment #3: alsa-info-4.1-rc1.txt --] [-- Type: text/plain, Size: 40238 bytes --] upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Wed Apr 29 11:19:52 UTC 2015 !!Linux Distribution !!------------------ Debian GNU/Linux 8 \n \l PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/" !!DMI Information !!--------------- Manufacturer: Dell Inc. Product Name: Latitude E7240 Product Version: 01 Firmware Version: A14 !!Kernel Information !!------------------ Kernel release: 4.1.0-rc1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.1.0-rc1 Library version: 1.0.28 Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7e34000 irq 48 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e30000 irq 47 !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0a0c (rev 0b) Subsystem: 1028:05ca -- 00:1b.0 0403: 8086:9c20 (rev 04) Subsystem: 1028:05ca !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862807 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Control: name="ELD", index=0, device=7 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Control: name="ELD", index=0, device=8 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Realtek ALC3226 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0292 Subsystem Id: 0x102805ca Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker+LO Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC3226 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x3f 0x3f] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Dock Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Dock Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Headset Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Headset Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x01 0x01] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Dock Line Out Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014020: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Dock Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Dock Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x01a19030: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Headset Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Headset Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40700001: [N/A] Modem Hand at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=124 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 2 Apr 27 23:24 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 7 Apr 27 23:24 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 6 Apr 27 23:24 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Apr 27 23:24 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 3 Apr 27 23:24 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 4 Apr 27 23:24 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 5 Apr 27 23:24 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 9 Apr 27 23:24 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 8 Apr 29 12:19 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 1 Apr 27 23:24 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Apr 27 23:24 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Apr 27 23:24 . drwxr-xr-x 3 root root 280 Apr 27 23:24 .. lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 27 23:24 pci-0000:00:1b.0 -> ../controlC1 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # pcm.bluetooth { # type plug # slave { # pcm "bluetooth_hw" # } # } # pcm.bluetooth_hw { # type bluetooth # device 00:02:3C:27:1A:0E # profile "auto" # } pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse # If defaults.namehint.showall is set to off in alsa.conf, then this is # necessary to make this pcm show up in the list returned by # snd_device_name_hint or aplay -L hint.description "Default Audio Device" } ctl.!default { type pulse } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: PCH [HDA Intel PCH], device 0: ALC3226 Analog [ALC3226 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf7e34000 irq 48' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,00100000' Controls : 21 Simple ctrls : 3 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf7e30000 irq 47' Mixer name : 'Realtek ALC3226' Components : 'HDA:10ec0292,102805ca,00100001' Controls : 29 Simple ctrls : 15 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 64 [74%] [-17.25dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 0 [0%] [-65.25dB] [off] Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'Speaker',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Speaker+LO',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] Front Right: Playback 87 [100%] [0.00dB] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Line Out',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 63 Front Left: Capture 63 [100%] [30.00dB] [on] Front Right: Capture 63 [100%] [30.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Speaker Only' 'Line Out+Speaker' Item0: 'Line Out+Speaker' Simple mixer control 'Dock Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Dock Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Headset Mic',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 31 Mono: Capture [off] Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Headset Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Internal Mic',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 1 [33%] [12.00dB] Front Right: 1 [33%] [12.00dB] !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.20 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.21 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.PCH { control.1 { iface MIXER name 'Speaker+LO Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Line Out Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Headphone Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 dbvalue.1 -6525 } } control.4 { iface MIXER name 'Headphone Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.6 { iface MIXER name 'Dock Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.7 { iface MIXER name 'Dock Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.8 { iface MIXER name 'Headset Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.9 { iface MIXER name 'Headset Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Auto-Mute Mode' value 'Line Out+Speaker' comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 'Speaker Only' item.2 'Line Out+Speaker' } } control.11 { iface MIXER name 'Capture Source' value 'Internal Mic' comment { access 'read write' type ENUMERATED count 1 item.0 'Dock Mic' item.1 'Headset Mic' item.2 'Internal Mic' } } control.12 { iface MIXER name 'Capture Volume' value.0 63 value.1 63 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -1725 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.13 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.14 { iface MIXER name 'Dock Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 0 dbvalue.1 0 } } control.15 { iface MIXER name 'Headset Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.16 { iface MIXER name 'Internal Mic Boost Volume' value.0 1 value.1 1 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 1200 dbvalue.1 1200 } } control.17 { iface MIXER name 'Master Playback Volume' value 64 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -1725 } } control.18 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.19 { iface CARD name 'Dock Mic Jack' value false comment { access read type BOOLEAN count 1 } } control.20 { iface CARD name 'Headset Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.21 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.22 { iface CARD name 'Dock Line Out Jack' value false comment { access read type BOOLEAN count 1 } } control.23 { iface CARD name 'Front Headphone Jack' value false comment { access read type BOOLEAN count 1 } } control.24 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.25 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.26 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.27 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.28 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.29 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module msr cpufreq_stats ctr ccm binfmt_misc bnep nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 joydev qmi_wwan cdc_mbim btusb btintel intel_rapl iosf_mbi cdc_ncm bluetooth cdc_wdm x86_pkg_temp_thermal intel_powerclamp usbnet pcspkr mii tpm_tis iwlmvm mac80211 8250 serial_core iwlwifi snd_hda_codec_hdmi psmouse snd_hda_codec_realtek cfg80211 efivars serio_raw snd_hda_codec_generic hid_multitouch i2c_i801 battery ac snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_hda_core evdev snd_pcm snd_timer processor md_mod tpm_rng tpm rng_core fuse autofs4 algif_skcipher af_alg hid_generic usbhid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sg ehci_pci sdhci_pci ehci_hcd xhci_pci xhci_hcd thermal sdhci_acpi sdhci mmc_core i2c_hid hid !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x05 0x18560010 0x06 0x18560010 0x07 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60140 0x13 0x411111f0 0x14 0x90170110 0x15 0x0221401f 0x16 0x01014020 0x18 0x411111f0 0x19 0x01a19030 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40700001 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: 0x16 0x21014020 0x19 0x21a19030 0x1a 0x01a1913c /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 0.841050] PM: Hibernation image not present or could not be loaded. [ 0.841060] ALSA device list: [ 0.841061] No soundcards found. [ 1.352333] tsc: Refined TSC clocksource calibration: 2494.229 MHz -- [ 23.460505] systemd-udevd[310]: starting version 215 [ 23.551075] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 23.551279] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81891a00) [ 23.574030] EFI Variables Facility v0.08 2004-May-17 -- [ 23.575721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.575852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 23.575855] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 23.575857] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 23.575858] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 23.575859] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 23.575861] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 23.575863] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 23.575870] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 23.579526] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:03EB:8844.0001/input/input10 -- [ 23.582253] cfg80211: Calling CRDA to update world regulatory domain [ 23.582324] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.582397] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.582747] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.584635] Intel(R) Wireless WiFi driver for Linux -- [ 23.589830] iwlwifi 0000:02:00.0: loaded firmware version 25.16.12.0 op_mode iwlmvm [ 23.593267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 23.594102] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 23.594268] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.594346] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.596208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-29 11:28 ` Jonathan McDowell @ 2015-04-29 11:54 ` Takashi Iwai 2015-04-30 15:01 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-04-29 11:54 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Wed, 29 Apr 2015 12:28:59 +0100, Jonathan McDowell wrote: > > On Tue, Apr 28, 2015 at 04:43:00PM +0200, Takashi Iwai wrote: > > At Tue, 28 Apr 2015 15:05:20 +0200, > > Takashi Iwai wrote: > > > At Tue, 28 Apr 2015 13:35:18 +0100, > > > Jonathan McDowell wrote: > > > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > > > > At Tue, 28 Apr 2015 12:21:57 +0100, > > > > > Jonathan McDowell wrote: > > > > > > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio > > > > > > crackles at regular intervals. I'm fairly sure this is due to > > > > > > the HDA power save as once audio is playing things are fine, > > > > > > it's just when starting to play audio that I hear the crackle. > > > > > > > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet > > > > > > but will attempt to find some time to do so in the next few > > > > > > days. It looks like there have been some changes in sound/hda/ > > > > > > between 4.0 + 4.1-rc1 so I'll concentrate on those first. > > > > > > > > > > > There are lots of code changes and enhancements wrt power saving > > > > > in 4.1, and bisection won't help so much, I'm afraid. > > > > > > > > > > First off, check the device status while you hear crackles. Is > > > > > the codec in runtime suspend (aka power save)? This can be seen > > > > > in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check > > > > > the runtime status of the controller, too, found in > > > > > /sys/class/sound/card?/device/power/runtime_status. > > > > > > > > The cracking is definitely happening with the transition from suspended > > > > to active: > > > > > > > > /sys/class/sound/card0/device/power/runtime_status:suspended > > > > /sys/class/sound/card1/device/power/runtime_status:active > > > > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > > > > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > > > > > > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > > > > terminal bell, got the crackle and the state changed to active as above. > > > > > > Ah, so it's a click noise that happens only once per runtime PM > > > transition? I thought it were constant crackling noises from your > > > description ("regular intervals"). > > > > > > In anyway, please give alsa-info.sh output on both 4.0 and 4.1. > > > > Also, does the click noise occur only at powering up, and not at > > powering down? > > The click is only on the transition from suspended to active; not > constantly during playback and not when transitioning from active to > suspended. It doesn't appear 4.0 is doing the suspending at all; there > are no /sys/bus/hdaudio/devices/*/power/runtime_status files and the > card runtime_status is always active. alsa-info for 4.0 + 4.1-rc1 > attached. OK, thanks for clarification. One patch you can try (with or without power_save_node disablement) is below, it squashes the verb sequences at (runtime) PM resume as we did for 4.0. Let me know if this changes the behavior. Takashi --- diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 2a8aa9dfb83d..8e47d9cc369f 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -79,6 +79,7 @@ struct hdac_device { bool lazy_cache:1; /* don't wake up for writes */ bool caps_overwriting:1; /* caps overwrite being in process */ bool cache_coef:1; /* cache COEF read/write too */ + bool cache_only:1; /* don't write actually registers */ }; /* device/driver type used for matching */ diff --git a/sound/hda/hdac_regmap.c b/sound/hda/hdac_regmap.c index 7371e0c3926f..c5b3dcbbacdd 100644 --- a/sound/hda/hdac_regmap.c +++ b/sound/hda/hdac_regmap.c @@ -265,6 +265,9 @@ static int hda_reg_write(void *context, unsigned int reg, unsigned int val) unsigned int verb; int i, bytes, err; + if (codec->cache_only) + return 0; + reg &= ~0x00080000U; /* drop GET bit */ reg |= (codec->addr << 28); verb = get_verb(reg); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e70a7fb393dd..8f79d649975b 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3156,28 +3156,29 @@ static void hda_call_codec_resume(struct hda_codec *codec) { atomic_inc(&codec->core.in_pm); - if (codec->core.regmap) - regcache_mark_dirty(codec->core.regmap); - codec->power_jiffies = jiffies; hda_set_power_state(codec, AC_PWRST_D0); restore_shutup_pins(codec); hda_exec_init_verbs(codec); snd_hda_jack_set_dirty_all(codec); + if (codec->core.regmap) { + regcache_mark_dirty(codec->core.regmap); + codec->core.cache_only = true; + } if (codec->patch_ops.resume) codec->patch_ops.resume(codec); - else { - if (codec->patch_ops.init) - codec->patch_ops.init(codec); - if (codec->core.regmap) - regcache_sync(codec->core.regmap); - } + else if (codec->patch_ops.init) + codec->patch_ops.init(codec); if (codec->jackpoll_interval) hda_jackpoll_work(&codec->jackpoll_work.work); else snd_hda_jack_report_sync(codec); + if (codec->core.regmap) { + codec->core.cache_only = false; + regcache_sync(codec->core.regmap); + } atomic_dec(&codec->core.in_pm); } diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 3d2597b7037b..844d5e6ae1a1 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -5780,8 +5780,6 @@ int snd_hda_gen_init(struct hda_codec *codec) /* call init functions of standard auto-mute helpers */ update_automute_all(codec); - regcache_sync(codec->core.regmap); - if (spec->vmaster_mute.sw_kctl && spec->vmaster_mute.hook) snd_hda_sync_vmaster_hook(&spec->vmaster_mute); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5f44f60a6389..e4a774ddb1fc 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2211,7 +2211,6 @@ static int generic_hdmi_resume(struct hda_codec *codec) int pin_idx; codec->patch_ops.init(codec); - regcache_sync(codec->core.regmap); for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b18b9c67b262..34219aa6a40e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -799,7 +799,6 @@ static int alc_resume(struct hda_codec *codec) if (!spec->no_depop_delay) msleep(150); /* to avoid pop noise */ codec->patch_ops.init(codec); - regcache_sync(codec->core.regmap); hda_call_check_power_status(codec, 0x01); return 0; } @@ -3059,7 +3058,6 @@ static int alc269_resume(struct hda_codec *codec) msleep(200); } - regcache_sync(codec->core.regmap); hda_call_check_power_status(codec, 0x01); /* on some machine, the BIOS will clear the codec gpio data when enter ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-29 11:54 ` Takashi Iwai @ 2015-04-30 15:01 ` Jonathan McDowell 2015-04-30 17:06 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-04-30 15:01 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > At Wed, 29 Apr 2015 12:28:59 +0100, > Jonathan McDowell wrote: > > > > On Tue, Apr 28, 2015 at 04:43:00PM +0200, Takashi Iwai wrote: > > > At Tue, 28 Apr 2015 15:05:20 +0200, > > > Takashi Iwai wrote: > > > > At Tue, 28 Apr 2015 13:35:18 +0100, > > > > Jonathan McDowell wrote: > > > > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > > > > > At Tue, 28 Apr 2015 12:21:57 +0100, > > > > > > Jonathan McDowell wrote: > > > > > > > > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio > > > > > > > crackles at regular intervals. I'm fairly sure this is due to > > > > > > > the HDA power save as once audio is playing things are fine, > > > > > > > it's just when starting to play audio that I hear the crackle. > > > > > > > > > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet > > > > > > > but will attempt to find some time to do so in the next few > > > > > > > days. It looks like there have been some changes in sound/hda/ > > > > > > > between 4.0 + 4.1-rc1 so I'll concentrate on those first. > > > > > > > > > > > > > There are lots of code changes and enhancements wrt power saving > > > > > > in 4.1, and bisection won't help so much, I'm afraid. > > > > > > > > > > > > First off, check the device status while you hear crackles. Is > > > > > > the codec in runtime suspend (aka power save)? This can be seen > > > > > > in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check > > > > > > the runtime status of the controller, too, found in > > > > > > /sys/class/sound/card?/device/power/runtime_status. > > > > > > > > > > The cracking is definitely happening with the transition from suspended > > > > > to active: > > > > > > > > > > /sys/class/sound/card0/device/power/runtime_status:suspended > > > > > /sys/class/sound/card1/device/power/runtime_status:active > > > > > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > > > > > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > > > > > > > > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > > > > > terminal bell, got the crackle and the state changed to active as above. > > > > > > > > Ah, so it's a click noise that happens only once per runtime PM > > > > transition? I thought it were constant crackling noises from your > > > > description ("regular intervals"). > > > > > > > > In anyway, please give alsa-info.sh output on both 4.0 and 4.1. > > > > > > Also, does the click noise occur only at powering up, and not at > > > powering down? > > > > The click is only on the transition from suspended to active; not > > constantly during playback and not when transitioning from active to > > suspended. It doesn't appear 4.0 is doing the suspending at all; there > > are no /sys/bus/hdaudio/devices/*/power/runtime_status files and the > > card runtime_status is always active. alsa-info for 4.0 + 4.1-rc1 > > attached. > > OK, thanks for clarification. > > One patch you can try (with or without power_save_node disablement) is > below, it squashes the verb sequences at (runtime) PM resume as we did > for 4.0. Let me know if this changes the behavior. Patch alone has no effect. Patch with power_save_node disablement solves the problem. Didn't try power_save_node disablement without the patch. J. -- This .sig brought to you by the letter M and the number 7 Product of the Republic of HuggieTag ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-30 15:01 ` Jonathan McDowell @ 2015-04-30 17:06 ` Takashi Iwai 2015-05-02 15:05 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-04-30 17:06 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Thu, 30 Apr 2015 16:01:31 +0100, Jonathan McDowell wrote: > > On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > > At Wed, 29 Apr 2015 12:28:59 +0100, > > Jonathan McDowell wrote: > > > > > > On Tue, Apr 28, 2015 at 04:43:00PM +0200, Takashi Iwai wrote: > > > > At Tue, 28 Apr 2015 15:05:20 +0200, > > > > Takashi Iwai wrote: > > > > > At Tue, 28 Apr 2015 13:35:18 +0100, > > > > > Jonathan McDowell wrote: > > > > > > On Tue, Apr 28, 2015 at 02:00:17PM +0200, Takashi Iwai wrote: > > > > > > > At Tue, 28 Apr 2015 12:21:57 +0100, > > > > > > > Jonathan McDowell wrote: > > > > > > > > > > > > > > > Having upgraded to 4.1-rc1 from 4.0 I'm now hearing audio > > > > > > > > crackles at regular intervals. I'm fairly sure this is due to > > > > > > > > the HDA power save as once audio is playing things are fine, > > > > > > > > it's just when starting to play audio that I hear the crackle. > > > > > > > > > > > > > > > > System is a Dell Latitude E7240. I haven't tried a bisect yet > > > > > > > > but will attempt to find some time to do so in the next few > > > > > > > > days. It looks like there have been some changes in sound/hda/ > > > > > > > > between 4.0 + 4.1-rc1 so I'll concentrate on those first. > > > > > > > > > > > > > > > There are lots of code changes and enhancements wrt power saving > > > > > > > in 4.1, and bisection won't help so much, I'm afraid. > > > > > > > > > > > > > > First off, check the device status while you hear crackles. Is > > > > > > > the codec in runtime suspend (aka power save)? This can be seen > > > > > > > in /sys/bus/hdaudio/devices/*/power/runtime_status. Then check > > > > > > > the runtime status of the controller, too, found in > > > > > > > /sys/class/sound/card?/device/power/runtime_status. > > > > > > > > > > > > The cracking is definitely happening with the transition from suspended > > > > > > to active: > > > > > > > > > > > > /sys/class/sound/card0/device/power/runtime_status:suspended > > > > > > /sys/class/sound/card1/device/power/runtime_status:active > > > > > > /sys/bus/hdaudio/devices/hdaudioC0D0/power/runtime_status:suspended > > > > > > /sys/bus/hdaudio/devices/hdaudioC1D0/power/runtime_status:active > > > > > > > > > > > > card1 + C1D0 were suspended, I hit delete in a terminal to force a > > > > > > terminal bell, got the crackle and the state changed to active as above. > > > > > > > > > > Ah, so it's a click noise that happens only once per runtime PM > > > > > transition? I thought it were constant crackling noises from your > > > > > description ("regular intervals"). > > > > > > > > > > In anyway, please give alsa-info.sh output on both 4.0 and 4.1. > > > > > > > > Also, does the click noise occur only at powering up, and not at > > > > powering down? > > > > > > The click is only on the transition from suspended to active; not > > > constantly during playback and not when transitioning from active to > > > suspended. It doesn't appear 4.0 is doing the suspending at all; there > > > are no /sys/bus/hdaudio/devices/*/power/runtime_status files and the > > > card runtime_status is always active. alsa-info for 4.0 + 4.1-rc1 > > > attached. > > > > OK, thanks for clarification. > > > > One patch you can try (with or without power_save_node disablement) is > > below, it squashes the verb sequences at (runtime) PM resume as we did > > for 4.0. Let me know if this changes the behavior. > > Patch alone has no effect. Patch with power_save_node disablement solves > the problem. Didn't try power_save_node disablement without the patch. Then please confirm that only power_save_node disablement suffices. This can be considered as the least change that can be put to 4.1-rc if no better fix is found. thanks, Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-04-30 17:06 ` Takashi Iwai @ 2015-05-02 15:05 ` Jonathan McDowell 2015-05-19 6:15 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-05-02 15:05 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel On Thu, Apr 30, 2015 at 07:06:31PM +0200, Takashi Iwai wrote: > At Thu, 30 Apr 2015 16:01:31 +0100, Jonathan McDowell wrote: > > > > On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > > > > > > One patch you can try (with or without power_save_node > > > disablement) is below, it squashes the verb sequences at (runtime) > > > PM resume as we did for 4.0. Let me know if this changes the > > > behavior. > > > > Patch alone has no effect. Patch with power_save_node disablement > > solves the problem. Didn't try power_save_node disablement without > > the patch. > > Then please confirm that only power_save_node disablement suffices. > This can be considered as the least change that can be put to 4.1-rc > if no better fix is found. Setting codec->power_save_node to 0 in patch_alc269 is sufficient; no noticeable cracking occurring. J. -- Beware of programmers carrying screwdrivers. ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-02 15:05 ` Jonathan McDowell @ 2015-05-19 6:15 ` Takashi Iwai 2015-05-19 16:19 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-05-19 6:15 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Sat, 2 May 2015 16:05:13 +0100, Jonathan McDowell wrote: > > On Thu, Apr 30, 2015 at 07:06:31PM +0200, Takashi Iwai wrote: > > At Thu, 30 Apr 2015 16:01:31 +0100, Jonathan McDowell wrote: > > > > > > On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > > > > > > > > One patch you can try (with or without power_save_node > > > > disablement) is below, it squashes the verb sequences at (runtime) > > > > PM resume as we did for 4.0. Let me know if this changes the > > > > behavior. > > > > > > Patch alone has no effect. Patch with power_save_node disablement > > > solves the problem. Didn't try power_save_node disablement without > > > the patch. > > > > Then please confirm that only power_save_node disablement suffices. > > This can be considered as the least change that can be put to 4.1-rc > > if no better fix is found. > > Setting codec->power_save_node to 0 in patch_alc269 is sufficient; no > noticeable cracking occurring. Does the patch below have any improvement? Takashi --- diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 788f969b1a68..17147c2638f3 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -841,11 +841,19 @@ static hda_nid_t path_power_update(struct hda_codec *codec, else state = AC_PWRST_D3; if (!snd_hda_check_power_state(codec, nid, state)) { - snd_hda_codec_write(codec, nid, 0, + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_POWER_STATE, state); changed = nid; - if (state == AC_PWRST_D0) - snd_hdac_regmap_sync_node(&codec->core, nid); + if (state == AC_PWRST_D0) { + msleep(10); + /* all known codecs seem to be capable to handle + * widgets state even in D3, so far. + * if any new codecs need to restore the widget + * states after D0 transition, call the function + * below. + */ + /* snd_hdac_regmap_sync_node(&codec->core, nid); */ + } } } return changed; ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-19 6:15 ` Takashi Iwai @ 2015-05-19 16:19 ` Jonathan McDowell 2015-05-19 17:09 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-05-19 16:19 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote: > At Sat, 2 May 2015 16:05:13 +0100, > Jonathan McDowell wrote: > > > > On Thu, Apr 30, 2015 at 07:06:31PM +0200, Takashi Iwai wrote: > > > At Thu, 30 Apr 2015 16:01:31 +0100, Jonathan McDowell wrote: > > > > > > > > On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > > > > > > > > > > One patch you can try (with or without power_save_node > > > > > disablement) is below, it squashes the verb sequences at (runtime) > > > > > PM resume as we did for 4.0. Let me know if this changes the > > > > > behavior. > > > > > > > > Patch alone has no effect. Patch with power_save_node disablement > > > > solves the problem. Didn't try power_save_node disablement without > > > > the patch. > > > > > > Then please confirm that only power_save_node disablement suffices. > > > This can be considered as the least change that can be put to 4.1-rc > > > if no better fix is found. > > > > Setting codec->power_save_node to 0 in patch_alc269 is sufficient; no > > noticeable cracking occurring. > > Does the patch below have any improvement? I still get a clicking on the standby -> active transition with the patch provided on top of 4.1-rc4. J. -- 101 things you can't have too | .''`. Debian GNU/Linux Developer much of : 9 - Processing power. | : :' : Happy to accept PGP signed | `. `' or encrypted mail - RSA | `- key on the keyservers. ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-19 16:19 ` Jonathan McDowell @ 2015-05-19 17:09 ` Takashi Iwai 2015-05-19 21:53 ` Jonathan McDowell 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-05-19 17:09 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Tue, 19 May 2015 17:19:11 +0100, Jonathan McDowell wrote: > > On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote: > > At Sat, 2 May 2015 16:05:13 +0100, > > Jonathan McDowell wrote: > > > > > > On Thu, Apr 30, 2015 at 07:06:31PM +0200, Takashi Iwai wrote: > > > > At Thu, 30 Apr 2015 16:01:31 +0100, Jonathan McDowell wrote: > > > > > > > > > > On Wed, Apr 29, 2015 at 01:54:57PM +0200, Takashi Iwai wrote: > > > > > > > > > > > > One patch you can try (with or without power_save_node > > > > > > disablement) is below, it squashes the verb sequences at (runtime) > > > > > > PM resume as we did for 4.0. Let me know if this changes the > > > > > > behavior. > > > > > > > > > > Patch alone has no effect. Patch with power_save_node disablement > > > > > solves the problem. Didn't try power_save_node disablement without > > > > > the patch. > > > > > > > > Then please confirm that only power_save_node disablement suffices. > > > > This can be considered as the least change that can be put to 4.1-rc > > > > if no better fix is found. > > > > > > Setting codec->power_save_node to 0 in patch_alc269 is sufficient; no > > > noticeable cracking occurring. > > > > Does the patch below have any improvement? > > I still get a clicking on the standby -> active transition with the > patch provided on top of 4.1-rc4. OK, just to be sure, could you check whether changing msleep(10) to msleep(100) makes no difference? Also put a line like pr_info("XXX power up %x\n", nid); after msleep() call to see which nodes are powered up dynamically. Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-19 17:09 ` Takashi Iwai @ 2015-05-19 21:53 ` Jonathan McDowell 2015-05-20 5:01 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-05-19 21:53 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel On Tue, May 19, 2015 at 07:09:12PM +0200, Takashi Iwai wrote: > At Tue, 19 May 2015 17:19:11 +0100, > Jonathan McDowell wrote: > > > > On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote: > > > Does the patch below have any improvement? > > > > I still get a clicking on the standby -> active transition with the > > patch provided on top of 4.1-rc4. > > OK, just to be sure, could you check whether changing msleep(10) to > msleep(100) makes no difference? Also put a line like > pr_info("XXX power up %x\n", nid); > after msleep() call to see which nodes are powered up dynamically. Increasing the delay, if anything, makes the crackle when powering up seem a little longer. dmesg log looks like: [ 4206.075557] XXX power up 2 [ 4206.179671] XXX power up 14 [ 4206.291758] XXX power up 3 J. -- xmpp:noodles@earth.li "f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng." -- Simon Cozens, ox.os.linux ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-19 21:53 ` Jonathan McDowell @ 2015-05-20 5:01 ` Takashi Iwai 2015-05-20 20:02 ` Jonathan McDowell 2015-06-10 10:17 ` Mihai Donțu 0 siblings, 2 replies; 37+ messages in thread From: Takashi Iwai @ 2015-05-20 5:01 UTC (permalink / raw) To: Jonathan McDowell; +Cc: alsa-devel, linux-kernel At Tue, 19 May 2015 22:53:10 +0100, Jonathan McDowell wrote: > > On Tue, May 19, 2015 at 07:09:12PM +0200, Takashi Iwai wrote: > > At Tue, 19 May 2015 17:19:11 +0100, > > Jonathan McDowell wrote: > > > > > > On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote: > > > > Does the patch below have any improvement? > > > > > > I still get a clicking on the standby -> active transition with the > > > patch provided on top of 4.1-rc4. > > > > OK, just to be sure, could you check whether changing msleep(10) to > > msleep(100) makes no difference? Also put a line like > > pr_info("XXX power up %x\n", nid); > > after msleep() call to see which nodes are powered up dynamically. > > Increasing the delay, if anything, makes the crackle when powering up > seem a little longer. dmesg log looks like: > > [ 4206.075557] XXX power up 2 > [ 4206.179671] XXX power up 14 > [ 4206.291758] XXX power up 3 OK, so everything looks correct, but the codec (or the machine) seems leading to the noise when a branched path is activated while the pin was already powered up. Then let's disable the widget power-saving for these codecs. Could you confirm that the patch below works? thanks, Takashi -- 8< -- From: Takashi Iwai <tiwai@suse.de> Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co We've got reports that ALC3226 (a Dell variant of ALC292) gives click noises at transition from D3 to D0 when the widget power-saving is enabled. Further debugging session showed that avoiding it isn't trivial, unfortunately, since paths are basically activated dynamically while the pins have been already enabled. This patch disables the widget power-saving for such codecs. Reported-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2e246fe495f6..31f8f13be907 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - codec->power_save_node = 1; + if (codec->core.vendor_id != 0x10ec0292) + codec->power_save_node = 1; snd_hda_pick_fixup(codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups); -- 2.4.1 ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-20 5:01 ` Takashi Iwai @ 2015-05-20 20:02 ` Jonathan McDowell 2015-06-10 10:17 ` Mihai Donțu 1 sibling, 0 replies; 37+ messages in thread From: Jonathan McDowell @ 2015-05-20 20:02 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, linux-kernel On Wed, May 20, 2015 at 07:01:12AM +0200, Takashi Iwai wrote: > At Tue, 19 May 2015 22:53:10 +0100, > Jonathan McDowell wrote: > > > > On Tue, May 19, 2015 at 07:09:12PM +0200, Takashi Iwai wrote: > > > At Tue, 19 May 2015 17:19:11 +0100, > > > Jonathan McDowell wrote: > > > > > > > > On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote: > > > > > Does the patch below have any improvement? > > > > > > > > I still get a clicking on the standby -> active transition with the > > > > patch provided on top of 4.1-rc4. > > > > > > OK, just to be sure, could you check whether changing msleep(10) to > > > msleep(100) makes no difference? Also put a line like > > > pr_info("XXX power up %x\n", nid); > > > after msleep() call to see which nodes are powered up dynamically. > > > > Increasing the delay, if anything, makes the crackle when powering up > > seem a little longer. dmesg log looks like: > > > > [ 4206.075557] XXX power up 2 > > [ 4206.179671] XXX power up 14 > > [ 4206.291758] XXX power up 3 > > OK, so everything looks correct, but the codec (or the machine) seems > leading to the noise when a branched path is activated while the pin > was already powered up. Then let's disable the widget power-saving > for these codecs. > > Could you confirm that the patch below works? 4.1-rc4 + patch below running all day without hearing any crackles. Sounds good to me. > -- 8< -- > From: Takashi Iwai <tiwai@suse.de> > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > noises at transition from D3 to D0 when the widget power-saving is > enabled. Further debugging session showed that avoiding it isn't > trivial, unfortunately, since paths are basically activated > dynamically while the pins have been already enabled. > > This patch disables the widget power-saving for such codecs. > > Reported-by: Jonathan McDowell <noodles@earth.li> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > --- > sound/pci/hda/patch_realtek.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 2e246fe495f6..31f8f13be907 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > spec = codec->spec; > spec->gen.shared_mic_vref_pin = 0x18; > - codec->power_save_node = 1; > + if (codec->core.vendor_id != 0x10ec0292) > + codec->power_save_node = 1; > > snd_hda_pick_fixup(codec, alc269_fixup_models, > alc269_fixup_tbl, alc269_fixups); > -- J. -- ] http://www.earth.li/~noodles/ [] Sex, truth and jellibabies. [ ] PGP/GPG Key @ the.earth.li [] [ ] via keyserver, web or email. [] [ ] RSA: 4096/2DA8B985 [] [ ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-05-20 5:01 ` Takashi Iwai 2015-05-20 20:02 ` Jonathan McDowell @ 2015-06-10 10:17 ` Mihai Donțu 2015-06-10 10:22 ` Takashi Iwai 1 sibling, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 10:17 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > From: Takashi Iwai <tiwai@suse.de> > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > noises at transition from D3 to D0 when the widget power-saving is > enabled. Further debugging session showed that avoiding it isn't > trivial, unfortunately, since paths are basically activated > dynamically while the pins have been already enabled. > > This patch disables the widget power-saving for such codecs. > > Reported-by: Jonathan McDowell <noodles@earth.li> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > --- > sound/pci/hda/patch_realtek.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 2e246fe495f6..31f8f13be907 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > spec = codec->spec; > spec->gen.shared_mic_vref_pin = 0x18; > - codec->power_save_node = 1; > + if (codec->core.vendor_id != 0x10ec0292) > + codec->power_save_node = 1; > > snd_hda_pick_fixup(codec, alc269_fixup_models, > alc269_fixup_tbl, alc269_fixups); I'm on 4.1-rc7 which appears to contain this patch, however, I still get the audio artifacts (crackles) when I boot my laptop (Latitude E7440): [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 4.0.4 was fine. -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 10:17 ` Mihai Donțu @ 2015-06-10 10:22 ` Takashi Iwai 2015-06-10 10:41 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 10:22 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > From: Takashi Iwai <tiwai@suse.de> > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > noises at transition from D3 to D0 when the widget power-saving is > > enabled. Further debugging session showed that avoiding it isn't > > trivial, unfortunately, since paths are basically activated > > dynamically while the pins have been already enabled. > > > > This patch disables the widget power-saving for such codecs. > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > --- > > sound/pci/hda/patch_realtek.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > index 2e246fe495f6..31f8f13be907 100644 > > --- a/sound/pci/hda/patch_realtek.c > > +++ b/sound/pci/hda/patch_realtek.c > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > spec = codec->spec; > > spec->gen.shared_mic_vref_pin = 0x18; > > - codec->power_save_node = 1; > > + if (codec->core.vendor_id != 0x10ec0292) > > + codec->power_save_node = 1; > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > alc269_fixup_tbl, alc269_fixups); > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > get the audio artifacts (crackles) when I boot my laptop (Latitude > E7440): > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > 4.0.4 was fine. Does it happen only once at boot (i.e. at power up), or happens always at runtime PM? If it's a once-off boot thing, the patch shouldn't have much effect. Something else, very subtle thing, e.g. the order of verb execution, might cause this kind of problem. Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 10:22 ` Takashi Iwai @ 2015-06-10 10:41 ` Mihai Donțu 2015-06-10 10:50 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 10:41 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > From: Takashi Iwai <tiwai@suse.de> > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > noises at transition from D3 to D0 when the widget power-saving is > > > enabled. Further debugging session showed that avoiding it isn't > > > trivial, unfortunately, since paths are basically activated > > > dynamically while the pins have been already enabled. > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > --- > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > index 2e246fe495f6..31f8f13be907 100644 > > > --- a/sound/pci/hda/patch_realtek.c > > > +++ b/sound/pci/hda/patch_realtek.c > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > spec = codec->spec; > > > spec->gen.shared_mic_vref_pin = 0x18; > > > - codec->power_save_node = 1; > > > + if (codec->core.vendor_id != 0x10ec0292) > > > + codec->power_save_node = 1; > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > alc269_fixup_tbl, alc269_fixups); > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > E7440): > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > 4.0.4 was fine. > > Does it happen only once at boot (i.e. at power up), or happens always > at runtime PM? If it's a once-off boot thing, the patch shouldn't > have much effect. Something else, very subtle thing, e.g. the order > of verb execution, might cause this kind of problem. Only at power up. I've also suspend-resumed twice and can confirm it's OK. There's a _very_ brief click at suspend (when the power is cut), but it looks like a plain circuitry thing. I probably didn't notice it before because I wasn't looking for it. -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 10:41 ` Mihai Donțu @ 2015-06-10 10:50 ` Takashi Iwai 2015-06-10 11:45 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 10:50 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > From: Takashi Iwai <tiwai@suse.de> > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > enabled. Further debugging session showed that avoiding it isn't > > > > trivial, unfortunately, since paths are basically activated > > > > dynamically while the pins have been already enabled. > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > --- > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > --- a/sound/pci/hda/patch_realtek.c > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > spec = codec->spec; > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > - codec->power_save_node = 1; > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > + codec->power_save_node = 1; > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > E7440): > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > 4.0.4 was fine. > > > > Does it happen only once at boot (i.e. at power up), or happens always > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > have much effect. Something else, very subtle thing, e.g. the order > > of verb execution, might cause this kind of problem. > > Only at power up. I've also suspend-resumed twice and can confirm it's > OK. > > There's a _very_ brief click at suspend (when the power is cut), but it > looks like a plain circuitry thing. I probably didn't notice it before > because I wasn't looking for it. Thanks. Do you get the same click noise when reloading snd-hda-intel driver? Also, does it happen when booting in runlevel 3? Last but not least, a patch like below has any effect? Takashi --- diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, break; } + if (power_state == AC_PWRST_D0) + msleep(100); return state; } ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 10:50 ` Takashi Iwai @ 2015-06-10 11:45 ` Mihai Donțu 2015-06-10 12:33 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 11:45 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > trivial, unfortunately, since paths are basically activated > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > --- > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > spec = codec->spec; > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > - codec->power_save_node = 1; > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > + codec->power_save_node = 1; > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > E7440): > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > 4.0.4 was fine. > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > have much effect. Something else, very subtle thing, e.g. the order > > > of verb execution, might cause this kind of problem. > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > OK. > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > looks like a plain circuitry thing. I probably didn't notice it before > > because I wasn't looking for it. > > Thanks. Do you get the same click noise when reloading snd-hda-intel > driver? Also, does it happen when booting in runlevel 3? > > Last but not least, a patch like below has any effect? > > > Takashi > > --- > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > --- a/sound/pci/hda/hda_codec.c > +++ b/sound/pci/hda/hda_codec.c > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > break; > } > > + if (power_state == AC_PWRST_D0) > + msleep(100); > return state; > } > Reloading snd-hda-intel does not trigger the noise, but it helps. I've noticed that the clicks appear when loading/reloading pulseaudio. $ pulseaudio -k will spawn a new child in background (probably asked by kmix) and immediately I hear the noise. Reloading the driver makes the problem go away. telinit 3 does nothing for me (Gentoo seems to have things wired differently). Manually reloading alsasound (/etc/init.d/alsasound) did not trigger the problem either. However! Your patch seems to work. Cold boot, pulseaudio restart and nothing. Not a peep. :-) -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 11:45 ` Mihai Donțu @ 2015-06-10 12:33 ` Takashi Iwai 2015-06-10 12:50 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 12:33 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 14:45:51 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > --- > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > spec = codec->spec; > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > - codec->power_save_node = 1; > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > E7440): > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > 4.0.4 was fine. > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > of verb execution, might cause this kind of problem. > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > OK. > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > looks like a plain circuitry thing. I probably didn't notice it before > > > because I wasn't looking for it. > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > driver? Also, does it happen when booting in runlevel 3? > > > > Last but not least, a patch like below has any effect? > > > > > > Takashi > > > > --- > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > --- a/sound/pci/hda/hda_codec.c > > +++ b/sound/pci/hda/hda_codec.c > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > break; > > } > > > > + if (power_state == AC_PWRST_D0) > > + msleep(100); > > return state; > > } > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > noticed that the clicks appear when loading/reloading pulseaudio. > > $ pulseaudio -k > > will spawn a new child in background (probably asked by kmix) and > immediately I hear the noise. Reloading the driver makes the problem go > away. Hm. It's a bit inconsistent, but still this can be only at the full power up sequence. > telinit 3 does nothing for me (Gentoo seems to have things wired > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > not trigger the problem either. > > However! Your patch seems to work. Cold boot, pulseaudio restart and > nothing. Not a peep. :-) OK, could you try to reduce the sleep value from 100 to 10? Does it still work? thanks, Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 12:33 ` Takashi Iwai @ 2015-06-10 12:50 ` Takashi Iwai 2015-06-10 16:22 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 12:50 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 14:33:42 +0200, Takashi Iwai wrote: > > At Wed, 10 Jun 2015 14:45:51 +0300, > Mihai Donțu wrote: > > > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > > --- > > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > > > spec = codec->spec; > > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > > - codec->power_save_node = 1; > > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > > E7440): > > > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > > > 4.0.4 was fine. > > > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > > of verb execution, might cause this kind of problem. > > > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > > OK. > > > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > > looks like a plain circuitry thing. I probably didn't notice it before > > > > because I wasn't looking for it. > > > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > > driver? Also, does it happen when booting in runlevel 3? > > > > > > Last but not least, a patch like below has any effect? > > > > > > > > > Takashi > > > > > > --- > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > --- a/sound/pci/hda/hda_codec.c > > > +++ b/sound/pci/hda/hda_codec.c > > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > break; > > > } > > > > > > + if (power_state == AC_PWRST_D0) > > > + msleep(100); > > > return state; > > > } > > > > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > > noticed that the clicks appear when loading/reloading pulseaudio. > > > > $ pulseaudio -k > > > > will spawn a new child in background (probably asked by kmix) and > > immediately I hear the noise. Reloading the driver makes the problem go > > away. > > Hm. It's a bit inconsistent, but still this can be only at the full > power up sequence. > > > telinit 3 does nothing for me (Gentoo seems to have things wired > > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > > not trigger the problem either. > > > > However! Your patch seems to work. Cold boot, pulseaudio restart and > > nothing. Not a peep. :-) > > OK, could you try to reduce the sleep value from 100 to 10? > Does it still work? ... and check whether the patch below works instead. This is a better place if it really fixes. The former patch is in the common path every driver uses while this is codec-specific. thanks, Takashi --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0320cb523d9e..957412548ba1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - if (codec->core.vendor_id != 0x10ec0292) + if (codec->core.vendor_id == 0x10ec0292) + msleep(100); /* for avoiding click noise at power up */ + else codec->power_save_node = 1; snd_hda_pick_fixup(codec, alc269_fixup_models, ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 12:50 ` Takashi Iwai @ 2015-06-10 16:22 ` Mihai Donțu 2015-06-10 16:27 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 16:22 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote: > At Wed, 10 Jun 2015 14:33:42 +0200, Takashi Iwai wrote: > > At Wed, 10 Jun 2015 14:45:51 +0300, Mihai Donțu wrote: > > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > > > --- > > > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > > > > > spec = codec->spec; > > > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > > > - codec->power_save_node = 1; > > > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > > > E7440): > > > > > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > > > > > 4.0.4 was fine. > > > > > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > > > of verb execution, might cause this kind of problem. > > > > > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > > > OK. > > > > > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > > > looks like a plain circuitry thing. I probably didn't notice it before > > > > > because I wasn't looking for it. > > > > > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > > > driver? Also, does it happen when booting in runlevel 3? > > > > > > > > Last but not least, a patch like below has any effect? > > > > > > > > > > > > Takashi > > > > > > > > --- > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > > --- a/sound/pci/hda/hda_codec.c > > > > +++ b/sound/pci/hda/hda_codec.c > > > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > > break; > > > > } > > > > > > > > + if (power_state == AC_PWRST_D0) > > > > + msleep(100); > > > > return state; > > > > } > > > > > > > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > > > noticed that the clicks appear when loading/reloading pulseaudio. > > > > > > $ pulseaudio -k > > > > > > will spawn a new child in background (probably asked by kmix) and > > > immediately I hear the noise. Reloading the driver makes the problem go > > > away. > > > > Hm. It's a bit inconsistent, but still this can be only at the full > > power up sequence. > > > > > telinit 3 does nothing for me (Gentoo seems to have things wired > > > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > > > not trigger the problem either. > > > > > > However! Your patch seems to work. Cold boot, pulseaudio restart and > > > nothing. Not a peep. :-) > > > > OK, could you try to reduce the sleep value from 100 to 10? > > Does it still work? > > ... and check whether the patch below works instead. This is a better > place if it really fixes. The former patch is in the common path > every driver uses while this is codec-specific. > > --- > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 0320cb523d9e..957412548ba1 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) > > spec = codec->spec; > spec->gen.shared_mic_vref_pin = 0x18; > - if (codec->core.vendor_id != 0x10ec0292) > + if (codec->core.vendor_id == 0x10ec0292) > + msleep(100); /* for avoiding click noise at power up */ > + else > codec->power_save_node = 1; > > snd_hda_pick_fixup(codec, alc269_fixup_models, The initial patch but with msleep(10), works OK. This new one, however, does not (with 100ms or 10ms). -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 16:22 ` Mihai Donțu @ 2015-06-10 16:27 ` Takashi Iwai 2015-06-10 16:43 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 16:27 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 19:22:02 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote: > > At Wed, 10 Jun 2015 14:33:42 +0200, Takashi Iwai wrote: > > > At Wed, 10 Jun 2015 14:45:51 +0300, Mihai Donțu wrote: > > > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > > > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > > > > --- > > > > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > > > > > > > spec = codec->spec; > > > > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > > > > - codec->power_save_node = 1; > > > > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > > > > E7440): > > > > > > > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > > > > > > > 4.0.4 was fine. > > > > > > > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > > > > of verb execution, might cause this kind of problem. > > > > > > > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > > > > OK. > > > > > > > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > > > > looks like a plain circuitry thing. I probably didn't notice it before > > > > > > because I wasn't looking for it. > > > > > > > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > > > > driver? Also, does it happen when booting in runlevel 3? > > > > > > > > > > Last but not least, a patch like below has any effect? > > > > > > > > > > > > > > > Takashi > > > > > > > > > > --- > > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > > > --- a/sound/pci/hda/hda_codec.c > > > > > +++ b/sound/pci/hda/hda_codec.c > > > > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > > > break; > > > > > } > > > > > > > > > > + if (power_state == AC_PWRST_D0) > > > > > + msleep(100); > > > > > return state; > > > > > } > > > > > > > > > > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > > > > noticed that the clicks appear when loading/reloading pulseaudio. > > > > > > > > $ pulseaudio -k > > > > > > > > will spawn a new child in background (probably asked by kmix) and > > > > immediately I hear the noise. Reloading the driver makes the problem go > > > > away. > > > > > > Hm. It's a bit inconsistent, but still this can be only at the full > > > power up sequence. > > > > > > > telinit 3 does nothing for me (Gentoo seems to have things wired > > > > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > > > > not trigger the problem either. > > > > > > > > However! Your patch seems to work. Cold boot, pulseaudio restart and > > > > nothing. Not a peep. :-) > > > > > > OK, could you try to reduce the sleep value from 100 to 10? > > > Does it still work? > > > > ... and check whether the patch below works instead. This is a better > > place if it really fixes. The former patch is in the common path > > every driver uses while this is codec-specific. > > > > --- > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > index 0320cb523d9e..957412548ba1 100644 > > --- a/sound/pci/hda/patch_realtek.c > > +++ b/sound/pci/hda/patch_realtek.c > > @@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) > > > > spec = codec->spec; > > spec->gen.shared_mic_vref_pin = 0x18; > > - if (codec->core.vendor_id != 0x10ec0292) > > + if (codec->core.vendor_id == 0x10ec0292) > > + msleep(100); /* for avoiding click noise at power up */ > > + else > > codec->power_save_node = 1; > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > The initial patch but with msleep(10), works OK. This new one, however, > does not (with 100ms or 10ms). Hmm, could you make sure that the sleep is actually called, e.g. by adding a debug print or such? I blindly assumed that your codec is as same as Joanathan's (vendor id 0x10ec0292). You can check /proc/asound/card*/codec#* files, too. Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 16:27 ` Takashi Iwai @ 2015-06-10 16:43 ` Mihai Donțu 2015-06-10 18:23 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 16:43 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 10 Jun 2015 18:27:23 +0200 Takashi Iwai wrote: > At Wed, 10 Jun 2015 19:22:02 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote: > > > At Wed, 10 Jun 2015 14:33:42 +0200, Takashi Iwai wrote: > > > > At Wed, 10 Jun 2015 14:45:51 +0300, Mihai Donțu wrote: > > > > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > > > > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > > > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > > > > > --- > > > > > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > > > > > > > > > spec = codec->spec; > > > > > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > > > > > - codec->power_save_node = 1; > > > > > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > > > > > E7440): > > > > > > > > > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > > > > > > > > > 4.0.4 was fine. > > > > > > > > > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > > > > > of verb execution, might cause this kind of problem. > > > > > > > > > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > > > > > OK. > > > > > > > > > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > > > > > looks like a plain circuitry thing. I probably didn't notice it before > > > > > > > because I wasn't looking for it. > > > > > > > > > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > > > > > driver? Also, does it happen when booting in runlevel 3? > > > > > > > > > > > > Last but not least, a patch like below has any effect? > > > > > > > > > > > > > > > > > > Takashi > > > > > > > > > > > > --- > > > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > > > > --- a/sound/pci/hda/hda_codec.c > > > > > > +++ b/sound/pci/hda/hda_codec.c > > > > > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > > > > break; > > > > > > } > > > > > > > > > > > > + if (power_state == AC_PWRST_D0) > > > > > > + msleep(100); > > > > > > return state; > > > > > > } > > > > > > > > > > > > > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > > > > > noticed that the clicks appear when loading/reloading pulseaudio. > > > > > > > > > > $ pulseaudio -k > > > > > > > > > > will spawn a new child in background (probably asked by kmix) and > > > > > immediately I hear the noise. Reloading the driver makes the problem go > > > > > away. > > > > > > > > Hm. It's a bit inconsistent, but still this can be only at the full > > > > power up sequence. > > > > > > > > > telinit 3 does nothing for me (Gentoo seems to have things wired > > > > > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > > > > > not trigger the problem either. > > > > > > > > > > However! Your patch seems to work. Cold boot, pulseaudio restart and > > > > > nothing. Not a peep. :-) > > > > > > > > OK, could you try to reduce the sleep value from 100 to 10? > > > > Does it still work? > > > > > > ... and check whether the patch below works instead. This is a better > > > place if it really fixes. The former patch is in the common path > > > every driver uses while this is codec-specific. > > > > > > --- > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > index 0320cb523d9e..957412548ba1 100644 > > > --- a/sound/pci/hda/patch_realtek.c > > > +++ b/sound/pci/hda/patch_realtek.c > > > @@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > spec = codec->spec; > > > spec->gen.shared_mic_vref_pin = 0x18; > > > - if (codec->core.vendor_id != 0x10ec0292) > > > + if (codec->core.vendor_id == 0x10ec0292) > > > + msleep(100); /* for avoiding click noise at power up */ > > > + else > > > codec->power_save_node = 1; > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > The initial patch but with msleep(10), works OK. This new one, however, > > does not (with 100ms or 10ms). > > Hmm, could you make sure that the sleep is actually called, e.g. by > adding a debug print or such? I blindly assumed that your codec is > as same as Joanathan's (vendor id 0x10ec0292). You can check > /proc/asound/card*/codec#* files, too. I added some printk-s: [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: vendor_id: 0x10ec0292 [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: sleeping for 100ms The code above runs some good seconds before pulseaudio starts and triggers the clicks. Even before rootfs is re-mounted rw. -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 16:43 ` Mihai Donțu @ 2015-06-10 18:23 ` Takashi Iwai 2015-06-10 22:12 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-10 18:23 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Wed, 10 Jun 2015 19:43:03 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 18:27:23 +0200 Takashi Iwai wrote: > > At Wed, 10 Jun 2015 19:22:02 +0300, Mihai Donțu wrote: > > > On Wed, 10 Jun 2015 14:50:30 +0200 Takashi Iwai wrote: > > > > At Wed, 10 Jun 2015 14:33:42 +0200, Takashi Iwai wrote: > > > > > At Wed, 10 Jun 2015 14:45:51 +0300, Mihai Donțu wrote: > > > > > > On Wed, 10 Jun 2015 12:50:22 +0200 Takashi Iwai wrote: > > > > > > > At Wed, 10 Jun 2015 13:41:35 +0300, Mihai Donțu wrote: > > > > > > > > On Wed, 10 Jun 2015 12:22:53 +0200 Takashi Iwai wrote: > > > > > > > > > At Wed, 10 Jun 2015 13:17:55 +0300, Mihai Donțu wrote: > > > > > > > > > > On Wed, 20 May 2015 07:01:12 +0200 Takashi Iwai wrote: > > > > > > > > > > > From: Takashi Iwai <tiwai@suse.de> > > > > > > > > > > > Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co > > > > > > > > > > > > > > > > > > > > > > We've got reports that ALC3226 (a Dell variant of ALC292) gives click > > > > > > > > > > > noises at transition from D3 to D0 when the widget power-saving is > > > > > > > > > > > enabled. Further debugging session showed that avoiding it isn't > > > > > > > > > > > trivial, unfortunately, since paths are basically activated > > > > > > > > > > > dynamically while the pins have been already enabled. > > > > > > > > > > > > > > > > > > > > > > This patch disables the widget power-saving for such codecs. > > > > > > > > > > > > > > > > > > > > > > Reported-by: Jonathan McDowell <noodles@earth.li> > > > > > > > > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > > > > > > > > --- > > > > > > > > > > > sound/pci/hda/patch_realtek.c | 3 ++- > > > > > > > > > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > > > > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > > > > > > > > index 2e246fe495f6..31f8f13be907 100644 > > > > > > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > > > > > > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > > > > > > > > @@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > > > > > > > > > > > > > > > spec = codec->spec; > > > > > > > > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > > > > > > > > - codec->power_save_node = 1; > > > > > > > > > > > + if (codec->core.vendor_id != 0x10ec0292) > > > > > > > > > > > + codec->power_save_node = 1; > > > > > > > > > > > > > > > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > > > > > > alc269_fixup_tbl, alc269_fixups); > > > > > > > > > > > > > > > > > > > > I'm on 4.1-rc7 which appears to contain this patch, however, I still > > > > > > > > > > get the audio artifacts (crackles) when I boot my laptop (Latitude > > > > > > > > > > E7440): > > > > > > > > > > > > > > > > > > > > [ 1.058839] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line > > > > > > > > > > [ 1.058843] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) > > > > > > > > > > [ 1.058846] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > > > > > > > > > > [ 1.058849] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > > > > > > > > > > [ 1.058851] snd_hda_codec_realtek hdaudioC1D0: inputs: > > > > > > > > > > [ 1.058855] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 > > > > > > > > > > [ 1.058859] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a > > > > > > > > > > [ 1.058862] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > > > > > > > > > > > > > > > > > > > > 4.0.4 was fine. > > > > > > > > > > > > > > > > > > Does it happen only once at boot (i.e. at power up), or happens always > > > > > > > > > at runtime PM? If it's a once-off boot thing, the patch shouldn't > > > > > > > > > have much effect. Something else, very subtle thing, e.g. the order > > > > > > > > > of verb execution, might cause this kind of problem. > > > > > > > > > > > > > > > > Only at power up. I've also suspend-resumed twice and can confirm it's > > > > > > > > OK. > > > > > > > > > > > > > > > > There's a _very_ brief click at suspend (when the power is cut), but it > > > > > > > > looks like a plain circuitry thing. I probably didn't notice it before > > > > > > > > because I wasn't looking for it. > > > > > > > > > > > > > > Thanks. Do you get the same click noise when reloading snd-hda-intel > > > > > > > driver? Also, does it happen when booting in runlevel 3? > > > > > > > > > > > > > > Last but not least, a patch like below has any effect? > > > > > > > > > > > > > > > > > > > > > Takashi > > > > > > > > > > > > > > --- > > > > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > > > > > --- a/sound/pci/hda/hda_codec.c > > > > > > > +++ b/sound/pci/hda/hda_codec.c > > > > > > > @@ -3077,6 +3077,8 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > > > > > break; > > > > > > > } > > > > > > > > > > > > > > + if (power_state == AC_PWRST_D0) > > > > > > > + msleep(100); > > > > > > > return state; > > > > > > > } > > > > > > > > > > > > > > > > > > > Reloading snd-hda-intel does not trigger the noise, but it helps. I've > > > > > > noticed that the clicks appear when loading/reloading pulseaudio. > > > > > > > > > > > > $ pulseaudio -k > > > > > > > > > > > > will spawn a new child in background (probably asked by kmix) and > > > > > > immediately I hear the noise. Reloading the driver makes the problem go > > > > > > away. > > > > > > > > > > Hm. It's a bit inconsistent, but still this can be only at the full > > > > > power up sequence. > > > > > > > > > > > telinit 3 does nothing for me (Gentoo seems to have things wired > > > > > > differently). Manually reloading alsasound (/etc/init.d/alsasound) did > > > > > > not trigger the problem either. > > > > > > > > > > > > However! Your patch seems to work. Cold boot, pulseaudio restart and > > > > > > nothing. Not a peep. :-) > > > > > > > > > > OK, could you try to reduce the sleep value from 100 to 10? > > > > > Does it still work? > > > > > > > > ... and check whether the patch below works instead. This is a better > > > > place if it really fixes. The former patch is in the common path > > > > every driver uses while this is codec-specific. > > > > > > > > --- > > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > > index 0320cb523d9e..957412548ba1 100644 > > > > --- a/sound/pci/hda/patch_realtek.c > > > > +++ b/sound/pci/hda/patch_realtek.c > > > > @@ -5637,7 +5637,9 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > > > spec = codec->spec; > > > > spec->gen.shared_mic_vref_pin = 0x18; > > > > - if (codec->core.vendor_id != 0x10ec0292) > > > > + if (codec->core.vendor_id == 0x10ec0292) > > > > + msleep(100); /* for avoiding click noise at power up */ > > > > + else > > > > codec->power_save_node = 1; > > > > > > > > snd_hda_pick_fixup(codec, alc269_fixup_models, > > > > > > The initial patch but with msleep(10), works OK. This new one, however, > > > does not (with 100ms or 10ms). > > > > Hmm, could you make sure that the sleep is actually called, e.g. by > > adding a debug print or such? I blindly assumed that your codec is > > as same as Joanathan's (vendor id 0x10ec0292). You can check > > /proc/asound/card*/codec#* files, too. > > I added some printk-s: > > [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: vendor_id: 0x10ec0292 > [Wed Jun 10 19:36:23 2015] snd_hda_codec_realtek: sleeping for 100ms > > The code above runs some good seconds before pulseaudio starts and > triggers the clicks. Even before rootfs is re-mounted rw. OK, then it's really needed to be right after the power transition. To be sure, below is the patch I'm going to apply. If it really works, please give you tested-by tag. thanks, Takashi -- 8< -- From: Takashi Iwai <tiwai@suse.de> Subject: [PATCH] ALSA: hda - Reduce click noise at power up Some machines suffer from click noises at power up with the recent kernels, and this seems triggered at the power transition and the immediate verb executions. As a workaround, put a short delay (10ms) right after the D0 transition. There are a few places that have the same kind of delays, especially in the resume path. I guess they can be removed (or reduced) after this patch. But, since the delay is relatively small, let's do it later as a cleanup. Reported-by: Mihai Donțu <mihai.dontu@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index b7782212dd64..38f5509ee52f 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, break; } + if (power_state == AC_PWRST_D0) + msleep(10); + return state; } -- 2.4.3 ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 18:23 ` Takashi Iwai @ 2015-06-10 22:12 ` Mihai Donțu 2015-06-11 5:01 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-10 22:12 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote: > From: Takashi Iwai <tiwai@suse.de> > Subject: [PATCH] ALSA: hda - Reduce click noise at power up > > Some machines suffer from click noises at power up with the recent > kernels, and this seems triggered at the power transition and the > immediate verb executions. As a workaround, put a short delay (10ms) > right after the D0 transition. > > There are a few places that have the same kind of delays, especially > in the resume path. I guess they can be removed (or reduced) after > this patch. But, since the delay is relatively small, let's do it > later as a cleanup. > > Reported-by: Mihai Donțu <mihai.dontu@gmail.com> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > --- > sound/pci/hda/hda_codec.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > index b7782212dd64..38f5509ee52f 100644 > --- a/sound/pci/hda/hda_codec.c > +++ b/sound/pci/hda/hda_codec.c > @@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > break; > } > > + if (power_state == AC_PWRST_D0) > + msleep(10); > + > return state; > } > I take back my previous observations. I was at work and did not have access to headphones (one of those days). Now I'm at home, it's 1 AM, very quiet, and I notice the following: * on speakers: the click reproduces but with _very_ low amplitude; msleep(100) is unnoticeable, but msleep(10) is, barely; * on headphones: the moment I plug them I hear a loud static sound (like an old, untuned AM radio). If I play something, the static disappears. If I pause, the static returns after ~15s. -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-10 22:12 ` Mihai Donțu @ 2015-06-11 5:01 ` Takashi Iwai 2015-06-11 22:23 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-11 5:01 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Thu, 11 Jun 2015 01:12:36 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote: > > From: Takashi Iwai <tiwai@suse.de> > > Subject: [PATCH] ALSA: hda - Reduce click noise at power up > > > > Some machines suffer from click noises at power up with the recent > > kernels, and this seems triggered at the power transition and the > > immediate verb executions. As a workaround, put a short delay (10ms) > > right after the D0 transition. > > > > There are a few places that have the same kind of delays, especially > > in the resume path. I guess they can be removed (or reduced) after > > this patch. But, since the delay is relatively small, let's do it > > later as a cleanup. > > > > Reported-by: Mihai Donțu <mihai.dontu@gmail.com> > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > --- > > sound/pci/hda/hda_codec.c | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > index b7782212dd64..38f5509ee52f 100644 > > --- a/sound/pci/hda/hda_codec.c > > +++ b/sound/pci/hda/hda_codec.c > > @@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > break; > > } > > > > + if (power_state == AC_PWRST_D0) > > + msleep(10); > > + > > return state; > > } > > > > I take back my previous observations. I was at work and did not have > access to headphones (one of those days). Now I'm at home, it's 1 AM, > very quiet, and I notice the following: > > * on speakers: the click reproduces but with _very_ low amplitude; > msleep(100) is unnoticeable, but msleep(10) is, barely; > * on headphones: the moment I plug them I hear a loud static sound > (like an old, untuned AM radio). If I play something, the static > disappears. If I pause, the static returns after ~15s. OK, then the patch is no-go. We need a bit deeper analysis. About the headphone problem: don't you get the same issue with 4.0.x? Please take alsa-info.sh outputs on both 4.0.x and 4.1 before and after plugging the headphone, and attach the outputs. (Run the script with --no-upload option.) thanks, Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-11 5:01 ` Takashi Iwai @ 2015-06-11 22:23 ` Mihai Donțu 2015-06-12 7:00 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-11 22:23 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2510 bytes --] On Thu, 11 Jun 2015 07:01:13 +0200 Takashi Iwai wrote: > At Thu, 11 Jun 2015 01:12:36 +0300, Mihai Donțu wrote: > > On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote: > > > From: Takashi Iwai <tiwai@suse.de> > > > Subject: [PATCH] ALSA: hda - Reduce click noise at power up > > > > > > Some machines suffer from click noises at power up with the recent > > > kernels, and this seems triggered at the power transition and the > > > immediate verb executions. As a workaround, put a short delay (10ms) > > > right after the D0 transition. > > > > > > There are a few places that have the same kind of delays, especially > > > in the resume path. I guess they can be removed (or reduced) after > > > this patch. But, since the delay is relatively small, let's do it > > > later as a cleanup. > > > > > > Reported-by: Mihai Donțu <mihai.dontu@gmail.com> > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > --- > > > sound/pci/hda/hda_codec.c | 3 +++ > > > 1 file changed, 3 insertions(+) > > > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > index b7782212dd64..38f5509ee52f 100644 > > > --- a/sound/pci/hda/hda_codec.c > > > +++ b/sound/pci/hda/hda_codec.c > > > @@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > break; > > > } > > > > > > + if (power_state == AC_PWRST_D0) > > > + msleep(10); > > > + > > > return state; > > > } > > > > > > > I take back my previous observations. I was at work and did not have > > access to headphones (one of those days). Now I'm at home, it's 1 AM, > > very quiet, and I notice the following: > > > > * on speakers: the click reproduces but with _very_ low amplitude; > > msleep(100) is unnoticeable, but msleep(10) is, barely; > > * on headphones: the moment I plug them I hear a loud static sound > > (like an old, untuned AM radio). If I play something, the static > > disappears. If I pause, the static returns after ~15s. > > OK, then the patch is no-go. We need a bit deeper analysis. > > About the headphone problem: don't you get the same issue with 4.0.x? > Please take alsa-info.sh outputs on both 4.0.x and 4.1 before and > after plugging the headphone, and attach the outputs. > (Run the script with --no-upload option.) No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a small tarball with the two files produced by alsa-info.sh. Thanks, -- Mihai Donțu [-- Attachment #2: alsa-info.tar.gz --] [-- Type: application/gzip, Size: 11779 bytes --] ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-11 22:23 ` Mihai Donțu @ 2015-06-12 7:00 ` Takashi Iwai 2015-06-12 9:45 ` Mihai Donțu 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-12 7:00 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Fri, 12 Jun 2015 01:23:18 +0300, Mihai Donțu wrote: > > On Thu, 11 Jun 2015 07:01:13 +0200 Takashi Iwai wrote: > > At Thu, 11 Jun 2015 01:12:36 +0300, Mihai Donțu wrote: > > > On Wed, 10 Jun 2015 20:23:01 +0200 Takashi Iwai wrote: > > > > From: Takashi Iwai <tiwai@suse.de> > > > > Subject: [PATCH] ALSA: hda - Reduce click noise at power up > > > > > > > > Some machines suffer from click noises at power up with the recent > > > > kernels, and this seems triggered at the power transition and the > > > > immediate verb executions. As a workaround, put a short delay (10ms) > > > > right after the D0 transition. > > > > > > > > There are a few places that have the same kind of delays, especially > > > > in the resume path. I guess they can be removed (or reduced) after > > > > this patch. But, since the delay is relatively small, let's do it > > > > later as a cleanup. > > > > > > > > Reported-by: Mihai Donțu <mihai.dontu@gmail.com> > > > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > > > --- > > > > sound/pci/hda/hda_codec.c | 3 +++ > > > > 1 file changed, 3 insertions(+) > > > > > > > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c > > > > index b7782212dd64..38f5509ee52f 100644 > > > > --- a/sound/pci/hda/hda_codec.c > > > > +++ b/sound/pci/hda/hda_codec.c > > > > @@ -3077,6 +3077,9 @@ static unsigned int hda_set_power_state(struct hda_codec *codec, > > > > break; > > > > } > > > > > > > > + if (power_state == AC_PWRST_D0) > > > > + msleep(10); > > > > + > > > > return state; > > > > } > > > > > > > > > > I take back my previous observations. I was at work and did not have > > > access to headphones (one of those days). Now I'm at home, it's 1 AM, > > > very quiet, and I notice the following: > > > > > > * on speakers: the click reproduces but with _very_ low amplitude; > > > msleep(100) is unnoticeable, but msleep(10) is, barely; > > > * on headphones: the moment I plug them I hear a loud static sound > > > (like an old, untuned AM radio). If I play something, the static > > > disappears. If I pause, the static returns after ~15s. > > > > OK, then the patch is no-go. We need a bit deeper analysis. > > > > About the headphone problem: don't you get the same issue with 4.0.x? > > Please take alsa-info.sh outputs on both 4.0.x and 4.1 before and > > after plugging the headphone, and attach the outputs. > > (Run the script with --no-upload option.) > > No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a > small tarball with the two files produced by alsa-info.sh. Both are taken in different states (one is headphone plugged and another unplugged?). At best, take the snapshot in the same situation for comparison. In anyway, below is another shot in dark. The white noise is possibly the ill side effect of analog loopback. But it's strange that this didn't happen on 4.0.x. And, it combines another black magic that worked for another Dell model. Let's see. Takashi --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9d3e0fcb4326..cf46f6012ba4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4522,6 +4522,8 @@ enum { ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, ALC288_FIXUP_DELL_XPS_13_GPIO6, ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC292_FIXUP_DELL_E74, + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = { @@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E74] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id = ALC292_FIXUP_DISABLE_AAMIX + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E74), SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-12 7:00 ` Takashi Iwai @ 2015-06-12 9:45 ` Mihai Donțu 2015-06-12 10:09 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Mihai Donțu @ 2015-06-12 9:45 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote: > At Fri, 12 Jun 2015 01:23:18 +0300, Mihai Donțu wrote: > > No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a > > small tarball with the two files produced by alsa-info.sh. > > Both are taken in different states (one is headphone plugged and > another unplugged?). At best, take the snapshot in the same situation > for comparison. > > In anyway, below is another shot in dark. The white noise is possibly > the ill side effect of analog loopback. But it's strange that this > didn't happen on 4.0.x. And, it combines another black magic that > worked for another Dell model. Let's see. > > > Takashi > > --- > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 9d3e0fcb4326..cf46f6012ba4 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -4522,6 +4522,8 @@ enum { > ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, > ALC288_FIXUP_DELL_XPS_13_GPIO6, > ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, > + ALC292_FIXUP_DELL_E74, > + ALC292_FIXUP_DISABLE_AAMIX, > }; > > static const struct hda_fixup alc269_fixups[] = { > @@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { > .chained = true, > .chain_id = ALC269_FIXUP_HEADSET_MODE > }, > + [ALC292_FIXUP_DISABLE_AAMIX] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alc_fixup_disable_aamix, > + }, > + [ALC292_FIXUP_DELL_E74] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alc_fixup_dell_xps13, > + .chained = true, > + .chain_id = ALC292_FIXUP_DISABLE_AAMIX > + }, > }; > > static const struct snd_pci_quirk alc269_fixup_tbl[] = { > @@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), > SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), > SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), > + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E74), > SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), > SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), Nice shot! It appears to work. :-) No clicks, no static. I had to apply it by hand over 4.1-rc7, because the first two arrays look different in both it and -master. Anyway, I will play with it some more today see if anything else is broken. Oh, and yes, the second state is without headphones on. I removed them without thinking when the noise started. Sorry about that. Thanks! -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-12 9:45 ` Mihai Donțu @ 2015-06-12 10:09 ` Takashi Iwai 2015-06-12 14:13 ` Takashi Iwai 0 siblings, 1 reply; 37+ messages in thread From: Takashi Iwai @ 2015-06-12 10:09 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Fri, 12 Jun 2015 12:45:23 +0300, Mihai Donțu wrote: > > On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote: > > At Fri, 12 Jun 2015 01:23:18 +0300, Mihai Donțu wrote: > > > No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a > > > small tarball with the two files produced by alsa-info.sh. > > > > Both are taken in different states (one is headphone plugged and > > another unplugged?). At best, take the snapshot in the same situation > > for comparison. > > > > In anyway, below is another shot in dark. The white noise is possibly > > the ill side effect of analog loopback. But it's strange that this > > didn't happen on 4.0.x. And, it combines another black magic that > > worked for another Dell model. Let's see. > > > > > > Takashi > > > > --- > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > index 9d3e0fcb4326..cf46f6012ba4 100644 > > --- a/sound/pci/hda/patch_realtek.c > > +++ b/sound/pci/hda/patch_realtek.c > > @@ -4522,6 +4522,8 @@ enum { > > ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, > > ALC288_FIXUP_DELL_XPS_13_GPIO6, > > ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, > > + ALC292_FIXUP_DELL_E74, > > + ALC292_FIXUP_DISABLE_AAMIX, > > }; > > > > static const struct hda_fixup alc269_fixups[] = { > > @@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { > > .chained = true, > > .chain_id = ALC269_FIXUP_HEADSET_MODE > > }, > > + [ALC292_FIXUP_DISABLE_AAMIX] = { > > + .type = HDA_FIXUP_FUNC, > > + .v.func = alc_fixup_disable_aamix, > > + }, > > + [ALC292_FIXUP_DELL_E74] = { > > + .type = HDA_FIXUP_FUNC, > > + .v.func = alc_fixup_dell_xps13, > > + .chained = true, > > + .chain_id = ALC292_FIXUP_DISABLE_AAMIX > > + }, > > }; > > > > static const struct snd_pci_quirk alc269_fixup_tbl[] = { > > @@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > > SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), > > SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), > > SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), > > + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E74), > > SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), > > SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > > SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > > Nice shot! It appears to work. :-) No clicks, no static. Good to hear! > I had to apply it by hand over 4.1-rc7, because the first two arrays > look different in both it and -master. Anyway, I will play with it some > more today see if anything else is broken. While we are at it: could you try to enable codec->power_save_node in patch_alc269() (while keeping the new patch)? --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - if (codec->core.vendor_id != 0x10ec0292) - codec->power_save_node = 1; + codec->power_save_node = 1; #ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend; This was the workaround for Jonathan's machine, but maybe the new workaround is good enough. After changing this, try to enable the power save by writing like echo 1 > /sys/module/snd_hda_intel/parameters/power_save and start/stop playing something. thanks, Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-12 10:09 ` Takashi Iwai @ 2015-06-12 14:13 ` Takashi Iwai 2015-06-12 17:28 ` Mihai Donțu 2015-06-14 12:24 ` Jonathan McDowell 0 siblings, 2 replies; 37+ messages in thread From: Takashi Iwai @ 2015-06-12 14:13 UTC (permalink / raw) To: Mihai Donțu; +Cc: Jonathan McDowell, alsa-devel, linux-kernel At Fri, 12 Jun 2015 12:09:55 +0200, Takashi Iwai wrote: > > At Fri, 12 Jun 2015 12:45:23 +0300, > Mihai Donțu wrote: > > > > On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote: > > > At Fri, 12 Jun 2015 01:23:18 +0300, Mihai Donțu wrote: > > > > No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a > > > > small tarball with the two files produced by alsa-info.sh. > > > > > > Both are taken in different states (one is headphone plugged and > > > another unplugged?). At best, take the snapshot in the same situation > > > for comparison. > > > > > > In anyway, below is another shot in dark. The white noise is possibly > > > the ill side effect of analog loopback. But it's strange that this > > > didn't happen on 4.0.x. And, it combines another black magic that > > > worked for another Dell model. Let's see. > > > > > > > > > Takashi > > > > > > --- > > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > > > index 9d3e0fcb4326..cf46f6012ba4 100644 > > > --- a/sound/pci/hda/patch_realtek.c > > > +++ b/sound/pci/hda/patch_realtek.c > > > @@ -4522,6 +4522,8 @@ enum { > > > ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, > > > ALC288_FIXUP_DELL_XPS_13_GPIO6, > > > ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, > > > + ALC292_FIXUP_DELL_E74, > > > + ALC292_FIXUP_DISABLE_AAMIX, > > > }; > > > > > > static const struct hda_fixup alc269_fixups[] = { > > > @@ -5054,6 +5056,16 @@ static const struct hda_fixup alc269_fixups[] = { > > > .chained = true, > > > .chain_id = ALC269_FIXUP_HEADSET_MODE > > > }, > > > + [ALC292_FIXUP_DISABLE_AAMIX] = { > > > + .type = HDA_FIXUP_FUNC, > > > + .v.func = alc_fixup_disable_aamix, > > > + }, > > > + [ALC292_FIXUP_DELL_E74] = { > > > + .type = HDA_FIXUP_FUNC, > > > + .v.func = alc_fixup_dell_xps13, > > > + .chained = true, > > > + .chain_id = ALC292_FIXUP_DISABLE_AAMIX > > > + }, > > > }; > > > > > > static const struct snd_pci_quirk alc269_fixup_tbl[] = { > > > @@ -5066,6 +5078,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > > > SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), > > > SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), > > > SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), > > > + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E74), > > > SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), > > > SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > > > SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > > > > Nice shot! It appears to work. :-) No clicks, no static. > > Good to hear! > > > I had to apply it by hand over 4.1-rc7, because the first two arrays > > look different in both it and -master. Anyway, I will play with it some > > more today see if anything else is broken. > > While we are at it: could you try to enable codec->power_save_node in > patch_alc269() (while keeping the new patch)? > > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) > > spec = codec->spec; > spec->gen.shared_mic_vref_pin = 0x18; > - if (codec->core.vendor_id != 0x10ec0292) > - codec->power_save_node = 1; > + codec->power_save_node = 1; > > #ifdef CONFIG_PM > codec->patch_ops.suspend = alc269_suspend; For your convenience, below is the combined patch for 4.1. Jonathan, could you also try this patch and see whether you still get the noise? thanks, Takashi --- diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0320cb523d9e..919051d92a0b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4515,6 +4515,8 @@ enum { ALC288_FIXUP_DELL_HEADSET_MODE, ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, ALC288_FIXUP_DELL_XPS_13_GPIO6, + ALC292_FIXUP_DELL_E7X, + ALC292_FIXUP_DISABLE_AAMIX, }; static const struct hda_fixup alc269_fixups[] = { @@ -5037,6 +5039,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC288_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC292_FIXUP_DISABLE_AAMIX] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + }, + [ALC292_FIXUP_DELL_E7X] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_dell_xps13, + .chained = true, + .chain_id = ALC292_FIXUP_DISABLE_AAMIX + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -5049,6 +5061,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), + SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X), + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X), SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), @@ -5637,8 +5651,7 @@ static int patch_alc269(struct hda_codec *codec) spec = codec->spec; spec->gen.shared_mic_vref_pin = 0x18; - if (codec->core.vendor_id != 0x10ec0292) - codec->power_save_node = 1; + codec->power_save_node = 1; snd_hda_pick_fixup(codec, alc269_fixup_models, alc269_fixup_tbl, alc269_fixups); ^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-12 14:13 ` Takashi Iwai @ 2015-06-12 17:28 ` Mihai Donțu 2015-06-14 12:24 ` Jonathan McDowell 1 sibling, 0 replies; 37+ messages in thread From: Mihai Donțu @ 2015-06-12 17:28 UTC (permalink / raw) To: Takashi Iwai; +Cc: Jonathan McDowell, alsa-devel, linux-kernel On Fri, 12 Jun 2015 16:13:16 +0200 Takashi Iwai wrote: > For your convenience, below is the combined patch for 4.1. > > Jonathan, could you also try this patch and see whether you still get > the noise? > > --- > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index 0320cb523d9e..919051d92a0b 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -4515,6 +4515,8 @@ enum { > ALC288_FIXUP_DELL_HEADSET_MODE, > ALC288_FIXUP_DELL1_MIC_NO_PRESENCE, > ALC288_FIXUP_DELL_XPS_13_GPIO6, > + ALC292_FIXUP_DELL_E7X, > + ALC292_FIXUP_DISABLE_AAMIX, > }; > > static const struct hda_fixup alc269_fixups[] = { > @@ -5037,6 +5039,16 @@ static const struct hda_fixup alc269_fixups[] = { > .chained = true, > .chain_id = ALC288_FIXUP_DELL1_MIC_NO_PRESENCE > }, > + [ALC292_FIXUP_DISABLE_AAMIX] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alc_fixup_disable_aamix, > + }, > + [ALC292_FIXUP_DELL_E7X] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alc_fixup_dell_xps13, > + .chained = true, > + .chain_id = ALC292_FIXUP_DISABLE_AAMIX > + }, > }; > > static const struct snd_pci_quirk alc269_fixup_tbl[] = { > @@ -5049,6 +5061,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572), > SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS), > SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), > + SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X), > + SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X), > SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER), > SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), > @@ -5637,8 +5651,7 @@ static int patch_alc269(struct hda_codec *codec) > > spec = codec->spec; > spec->gen.shared_mic_vref_pin = 0x18; > - if (codec->core.vendor_id != 0x10ec0292) > - codec->power_save_node = 1; > + codec->power_save_node = 1; > > snd_hda_pick_fixup(codec, alc269_fixup_models, > alc269_fixup_tbl, alc269_fixups); This patch works fine for me. You can add my Tested-by when you re-spin it for Linus and if Jonathan is happy as well. Thank you! -- Mihai Donțu ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-12 14:13 ` Takashi Iwai 2015-06-12 17:28 ` Mihai Donțu @ 2015-06-14 12:24 ` Jonathan McDowell 2015-06-15 12:04 ` Takashi Iwai 1 sibling, 1 reply; 37+ messages in thread From: Jonathan McDowell @ 2015-06-14 12:24 UTC (permalink / raw) To: Takashi Iwai; +Cc: Mihai Donțu, alsa-devel, linux-kernel On Fri, Jun 12, 2015 at 04:13:16PM +0200, Takashi Iwai wrote: > At Fri, 12 Jun 2015 12:09:55 +0200, > Takashi Iwai wrote: > > At Fri, 12 Jun 2015 12:45:23 +0300, > > Mihai Donțu wrote: > > > Nice shot! It appears to work. :-) No clicks, no static. > > > > Good to hear! > > > > > I had to apply it by hand over 4.1-rc7, because the first two arrays > > > look different in both it and -master. Anyway, I will play with it some > > > more today see if anything else is broken. > > > > While we are at it: could you try to enable codec->power_save_node in > > patch_alc269() (while keeping the new patch)? > > > > --- a/sound/pci/hda/patch_realtek.c > > +++ b/sound/pci/hda/patch_realtek.c > > @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) > > > > spec = codec->spec; > > spec->gen.shared_mic_vref_pin = 0x18; > > - if (codec->core.vendor_id != 0x10ec0292) > > - codec->power_save_node = 1; > > + codec->power_save_node = 1; > > > > #ifdef CONFIG_PM > > codec->patch_ops.suspend = alc269_suspend; > > For your convenience, below is the combined patch for 4.1. > > Jonathan, could you also try this patch and see whether you still get > the noise? Applying the combined patch to 4.1-rc7 I'm not getting any noise on the transition from suspended to active. J. -- 101 things you can't have too | .''`. Debian GNU/Linux Developer much of : 47 - More coffee. | : :' : Happy to accept PGP signed | `. `' or encrypted mail - RSA | `- key on the keyservers. ^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: Audio crackles with 4.1-rc1 2015-06-14 12:24 ` Jonathan McDowell @ 2015-06-15 12:04 ` Takashi Iwai 0 siblings, 0 replies; 37+ messages in thread From: Takashi Iwai @ 2015-06-15 12:04 UTC (permalink / raw) To: Jonathan McDowell; +Cc: Mihai Donțu, alsa-devel, linux-kernel At Sun, 14 Jun 2015 13:24:20 +0100, Jonathan McDowell wrote: > > On Fri, Jun 12, 2015 at 04:13:16PM +0200, Takashi Iwai wrote: > > At Fri, 12 Jun 2015 12:09:55 +0200, > > Takashi Iwai wrote: > > > At Fri, 12 Jun 2015 12:45:23 +0300, > > > Mihai Donțu wrote: > > > > Nice shot! It appears to work. :-) No clicks, no static. > > > > > > Good to hear! > > > > > > > I had to apply it by hand over 4.1-rc7, because the first two arrays > > > > look different in both it and -master. Anyway, I will play with it some > > > > more today see if anything else is broken. > > > > > > While we are at it: could you try to enable codec->power_save_node in > > > patch_alc269() (while keeping the new patch)? > > > > > > --- a/sound/pci/hda/patch_realtek.c > > > +++ b/sound/pci/hda/patch_realtek.c > > > @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec) > > > > > > spec = codec->spec; > > > spec->gen.shared_mic_vref_pin = 0x18; > > > - if (codec->core.vendor_id != 0x10ec0292) > > > - codec->power_save_node = 1; > > > + codec->power_save_node = 1; > > > > > > #ifdef CONFIG_PM > > > codec->patch_ops.suspend = alc269_suspend; > > > > For your convenience, below is the combined patch for 4.1. > > > > Jonathan, could you also try this patch and see whether you still get > > the noise? > > Applying the combined patch to 4.1-rc7 I'm not getting any noise on the > transition from suspended to active. Great, I queued the fix patch for 4.1-final now. thanks, Takashi ^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2015-06-15 12:04 UTC | newest] Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-04-28 11:21 Audio crackles with 4.1-rc1 Jonathan McDowell 2015-04-28 12:00 ` Takashi Iwai 2015-04-28 12:35 ` Jonathan McDowell 2015-04-28 13:05 ` Takashi Iwai 2015-04-28 14:43 ` Takashi Iwai 2015-04-29 11:28 ` Jonathan McDowell 2015-04-29 11:54 ` Takashi Iwai 2015-04-30 15:01 ` Jonathan McDowell 2015-04-30 17:06 ` Takashi Iwai 2015-05-02 15:05 ` Jonathan McDowell 2015-05-19 6:15 ` Takashi Iwai 2015-05-19 16:19 ` Jonathan McDowell 2015-05-19 17:09 ` Takashi Iwai 2015-05-19 21:53 ` Jonathan McDowell 2015-05-20 5:01 ` Takashi Iwai 2015-05-20 20:02 ` Jonathan McDowell 2015-06-10 10:17 ` Mihai Donțu 2015-06-10 10:22 ` Takashi Iwai 2015-06-10 10:41 ` Mihai Donțu 2015-06-10 10:50 ` Takashi Iwai 2015-06-10 11:45 ` Mihai Donțu 2015-06-10 12:33 ` Takashi Iwai 2015-06-10 12:50 ` Takashi Iwai 2015-06-10 16:22 ` Mihai Donțu 2015-06-10 16:27 ` Takashi Iwai 2015-06-10 16:43 ` Mihai Donțu 2015-06-10 18:23 ` Takashi Iwai 2015-06-10 22:12 ` Mihai Donțu 2015-06-11 5:01 ` Takashi Iwai 2015-06-11 22:23 ` Mihai Donțu 2015-06-12 7:00 ` Takashi Iwai 2015-06-12 9:45 ` Mihai Donțu 2015-06-12 10:09 ` Takashi Iwai 2015-06-12 14:13 ` Takashi Iwai 2015-06-12 17:28 ` Mihai Donțu 2015-06-14 12:24 ` Jonathan McDowell 2015-06-15 12:04 ` Takashi Iwai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).