[U-Boot] [PULL] : Please pull u-boot-imx

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Hi Stefano,

On Fri, 27 Sep 2013 14:11:56 +0200, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
> 
>   Revert "standalone-examples: support custom GCC lib" (2013-09-12
> 10:27:29 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:
> 
>   i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
> +0200)
> 
> ----------------------------------------------------------------
> Andrew Gabbasov (1):
>       mx6: Fix calculation of emi_slow clock rate
> 
> Elie De Brauwer (1):
>       mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
> 
> Eric Nelson (2):
>       i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
>       i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
> 
> Fabio Estevam (17):
>       mx6sabresd: Add LVDS splash screen support
>       wandboard: Use imx6dl-wandboard.dtb for the solo version
>       mx6sabresd: Avoid hang when HDMI cable is not connected
>       mx6sabresd: Reset counter to prevent error message
>       mmc: fsl_esdhc: Check the result from malloc()
>       mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
>       mx6sabresd: Return error if cpu_eth_init() fails
>       mx6qsabreauto: Return error if cpu_eth_init() fails
>       net: fec_mxc: Add support for mx6 solo-lite
>       mx6slevk: Add Ethernet support
>       mx28evk: Fix checkpatch warning
>       doc: README.mxs: Add instruction to install 'libssl-dev'
>       mx6sabresd: Fix the fdt file for the mx6dl version
>       net: fec_mxc: Fix timeouts during tftp transfer
>       mx28evk: Propagate the error if cpu_eth_init() fails
>       mx28evk: Propagate the error if cpu_eth_init() fails
>       mx35pdk: Fix error handling in board_late_init()
> 
> Marek Vasut (6):
>       tools: mxsboot: Mark the FCB pages as valid
>       ARM: mxs: Sort the mx23evk and mx23_olinuxino
>       ARM: mxs: Document the power block initialization
>       ARM: mxs: Receive r0 and r1 passed from BootROM
>       ARM: mxs: Add Creative ZEN XFi3 board
>       ARM: mxs: Add SanDisk Sansa Fuze+ board
> 
> Markus Niebel (1):
>       ARM: arch-mx6: fix PLL2_PFD2_FREQ
> 
> Pierre Aubert (1):
>       mx6: Fix use of improper value in enable_ipu_clock
> 
> Robert Winkler (1):
>       imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
> 
> York Sun (1):
>       tools/imximage.c: Fix compiling warning
> 
> trem (3):
>       mx27: add missing constant for mx27
>       apf27: add support for the armadeus APF27 board
>       apf27: add FPGA support for the apf27 board
> 
>  arch/arm/cpu/arm926ejs/mx27/asm-offsets.c     |    5 +
>  arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |    5 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   |  209 +++++++++++
>  arch/arm/cpu/arm926ejs/mxs/start.S            |   50 ++-
>  arch/arm/cpu/armv7/mx6/clock.c                |   40 +-
>  arch/arm/include/asm/arch-mx27/imx-regs.h     |    6 +-
>  arch/arm/include/asm/arch-mx6/clock.h         |    1 +
>  arch/arm/include/asm/arch-mx6/crm_regs.h      |    2 +-
>  arch/arm/include/asm/arch-mx6/iomux.h         |    5 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    6 +-
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h     |    1 +
>  arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |   12 +
>  arch/arm/include/asm/arch-mxs/sys_proto.h     |    5 +-
>  board/armadeus/apf27/Makefile                 |   33 ++
>  board/armadeus/apf27/apf27.c                  |  256 +++++++++++++
>  board/armadeus/apf27/apf27.h                  |  489
> +++++++++++++++++++++++++
>  board/armadeus/apf27/fpga.c                   |  224 +++++++++++
>  board/armadeus/apf27/fpga.h                   |   25 ++
>  board/armadeus/apf27/lowlevel_init.S          |  168 +++++++++
>  board/bluegiga/apx4devkit/spl_boot.c          |    4 +-
>  board/boundary/nitrogen6x/nitrogen6x.c        |    4 +-
>  board/creative/xfi3/Makefile                  |   31 ++
>  board/creative/xfi3/spl_boot.c                |  134 +++++++
>  board/creative/xfi3/xfi3.c                    |  224 +++++++++++
>  board/denx/m28evk/m28evk.c                    |    2 +
>  board/denx/m28evk/spl_boot.c                  |    4 +-
>  board/freescale/mx23evk/spl_boot.c            |    4 +-
>  board/freescale/mx28evk/iomux.c               |    4 +-
>  board/freescale/mx28evk/mx28evk.c             |    4 +-
>  board/freescale/mx35pdk/mx35pdk.c             |   10 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |    2 +-
>  board/freescale/mx6sabresd/mx6sabresd.c       |  169 +++++++--
>  board/freescale/mx6slevk/mx6slevk.c           |   68 ++++
>  board/olimex/mx23_olinuxino/spl_boot.c        |    4 +-
>  board/sandisk/sansa_fuze_plus/Makefile        |   31 ++
>  board/sandisk/sansa_fuze_plus/sfp.c           |  388 ++++++++++++++++++++
>  board/sandisk/sansa_fuze_plus/spl_boot.c      |  140 +++++++
>  board/schulercontrol/sc_sps_1/spl_boot.c      |    4 +-
>  boards.cfg                                    |    3 +
>  doc/README.mxs                                |    5 +
>  drivers/mmc/fsl_esdhc.c                       |    2 +
>  drivers/mtd/nand/mxs_nand.c                   |    3 +
>  drivers/net/fec_mxc.c                         |    4 +-
>  drivers/net/fec_mxc.h                         |    4 +-
>  include/configs/apf27.h                       |  388 ++++++++++++++++++++
>  include/configs/mx35pdk.h                     |    1 -
>  include/configs/mx6sabresd.h                  |    4 +
>  include/configs/mx6slevk.h                    |   14 +
>  include/configs/sansa_fuze_plus.h             |   70 ++++
>  include/configs/wandboard.h                   |    4 +-
>  include/configs/xfi3.h                        |   69 ++++
>  tools/imximage.c                              |    8 +-
>  tools/mxsboot.c                               |   10 +-
>  53 files changed, 3269 insertions(+), 93 deletions(-)
>  create mode 100644 board/armadeus/apf27/Makefile
>  create mode 100644 board/armadeus/apf27/apf27.c
>  create mode 100644 board/armadeus/apf27/apf27.h
>  create mode 100644 board/armadeus/apf27/fpga.c
>  create mode 100644 board/armadeus/apf27/fpga.h
>  create mode 100644 board/armadeus/apf27/lowlevel_init.S
>  create mode 100644 board/creative/xfi3/Makefile
>  create mode 100644 board/creative/xfi3/spl_boot.c
>  create mode 100644 board/creative/xfi3/xfi3.c
>  create mode 100644 board/sandisk/sansa_fuze_plus/Makefile
>  create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c
>  create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c
>  create mode 100644 include/configs/apf27.h
>  create mode 100644 include/configs/sansa_fuze_plus.h
>  create mode 100644 include/configs/xfi3.h
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.