[U-Boot] [PULL] : Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5:

  Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
(2012-11-09 08:47:25 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 34275d70fec6cc369a931090ebb686bc213bb80d:

  arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)

----------------------------------------------------------------
Fabio Estevam (11):
      mx25pdk: Include CONFIG_MX25
      mx25pdk: Add esdhc support
      pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
      mx25: Place common functions into sys_proto.h
      pmic: Add support for mc34704
      mx25pdk: Add Ethernet support
      mx53loco: Allow booting a zImage kernel
      mx25pdk: Allow booting a zImage kernel
      mx51evk: Allow booting a zImage kernel
      mx35pdk: Allow booting a zImage kernel
      mx6qsabre_common: Allow booting a zImage kernel

Stefano Babic (8):
      ARM: Fix start.S when used with SPL in arm1136
      MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
      MX35: Add soc_boot_mode and soc_boot_device to MX35
      SPL: Added SPL target for mx35 SOC to SPL Makefile
      ARM: Add SPL target to arm1136
      MX35: add support for woodburn board
      MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
      Merge git://git.denx.de/u-boot

Troy Kisky (4):
      mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
      mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
      imx-common: cpu: add imx_ddr_size
      arch-mx6: add mx6dl_pins.h

 MAINTAINERS                                   |    1 +
 Makefile                                      |    1 +
 arch/arm/cpu/arm1136/config.mk                |    3 +
 arch/arm/cpu/arm1136/mx35/Makefile            |    1 +
 arch/arm/cpu/arm1136/mx35/generic.c           |   75 ++++++
 arch/arm/cpu/arm1136/mx35/mx35_sdram.c        |  137 +++++++++++
 arch/arm/cpu/arm1136/start.S                  |   31 ++-
 arch/arm/cpu/arm1136/u-boot-spl.lds           |   62 +++++
 arch/arm/cpu/armv7/mx6/soc.c                  |   32 ++-
 arch/arm/imx-common/cpu.c                     |   66 +++++-
 arch/arm/include/asm/arch-mx25/imx-regs.h     |    4 -
 arch/arm/include/asm/arch-mx25/sys_proto.h    |    3 +
 arch/arm/include/asm/arch-mx35/imx-regs.h     |    2 +
 arch/arm/include/asm/arch-mx35/mmc_host_def.h |   31 +++
 arch/arm/include/asm/arch-mx35/spl.h          |   38 +++
 arch/arm/include/asm/arch-mx35/sys_proto.h    |    2 +
 arch/arm/include/asm/arch-mx5/sys_proto.h     |   10 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h      |    2 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |  149 ++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h     |   10 +-
 board/freescale/mx25pdk/mx25pdk.c             |  114 +++++++++
 board/freescale/mx31ads/u-boot.lds            |    2 +
 board/syteco/zmx25/zmx25.c                    |    1 +
 board/woodburn/Makefile                       |   43 ++++
 board/woodburn/imximage.cfg                   |    4 +
 board/woodburn/lowlevel_init.S                |   38 +++
 board/woodburn/woodburn.c                     |  261 +++++++++++++++++++++
 boards.cfg                                    |    2 +
 drivers/gpio/mxc_gpio.c                       |    6 +-
 drivers/misc/pmic_fsl.c                       |    8 +-
 drivers/video/ipu_regs.h                      |    2 +-
 include/configs/mx25pdk.h                     |   40 +++-
 include/configs/mx35pdk.h                     |    2 +
 include/configs/mx51evk.h                     |    2 +-
 include/configs/mx53evk.h                     |    1 +
 include/configs/mx53loco.h                    |    2 +
 include/configs/mx6qarm2.h                    |    1 +
 include/configs/mx6qsabre_common.h            |    2 +
 include/configs/mx6qsabrelite.h               |    1 +
 include/configs/woodburn.h                    |   34 +++
 include/configs/woodburn_common.h             |  313
+++++++++++++++++++++++++
 include/configs/woodburn_sd.h                 |   60 +++++
 include/mc34704.h                             |   49 ++++
 nand_spl/board/freescale/mx31pdk/u-boot.lds   |    2 +
 spl/Makefile                                  |    6 +
 45 files changed, 1617 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
 create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
 create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
 create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
 create mode 100644 board/woodburn/Makefile
 create mode 100644 board/woodburn/imximage.cfg
 create mode 100644 board/woodburn/lowlevel_init.S
 create mode 100644 board/woodburn/woodburn.c
 create mode 100644 include/configs/woodburn.h
 create mode 100644 include/configs/woodburn_common.h
 create mode 100644 include/configs/woodburn_sd.h
 create mode 100644 include/mc34704.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================