[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:

  Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16
10:25:01 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to aee0013e53b339a573e2a8d66062fe87765aa3bd:

  mx53loco: Fix boot hang during reboot stress test (2015-02-10 12:48:50
+0100)

----------------------------------------------------------------
Alexandre Coffignal (1):
      mxsboot : Support of 224-bytes OOB area length

Christian Gmeiner (7):
      ot1200: select SUPPORT_SPL
      ot1200: make use of imx_ddr_size(..)
      ot1200: move ccgr and gpr init to c functions
      ot1200: enable spi clock directly in ccgr_init(..)
      ot1200: add SPL configuration
      ot1200: add basic SPL support
      ot1200: add ot1200_spl_defconfig file

Fabio Estevam (2):
      mx6sxsabresd: Remove unneeded board_late_init()
      mx53loco: Fix boot hang during reboot stress test

Graeme Russ (3):
      arm: mxs: Add debug outputs and comments to mxs SPL source files
      arm: mxs: Enable booting of mx28 without battery
      arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode

Heiko Schocher (1):
      arm, imx6, aristainetos: board updates

Nikita Kiryanov (14):
      arm: mx6: cm-fx6: expand boot sequence
      arm: mx6: cm-fx6: change dtb node for ethaddr
      compulab: eeprom: allow reading mac address from multiple eeproms
      arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
      arm: mx6: cm-fx6: increase size of malloc area
      arm: mx6: cm-fx6: add hdmi console support
      arm: mx6: cm-fx6: display compulab logo
      arm: mx6: cm-fx6: add support for usb keyboard
      compulab: splash: use errno values
      compulab: splash: refactor splash.c
      compulab: splash: support multiple splash sources
      compulab: splash: support loading splash from sf
      arm: mx6: cm-fx6: add splash screen support
      common: convert compulab splash load code to common code

Otavio Salvador (1):
      wandboard: Use 32bit color depth for Fusion LCD

Peng Fan (9):
      imx:mx6sxsabresd add spl config file
      imx:mx6sxsabresd select SUPPORT_SPL
      imx:mx6sxsabresd spl support in header file
      imx:mx6sx add dram io configure for mx6sx
      imx:mx6 add mx6sx in imx spl header file
      imx:mx6sxsabresd board spl support
      imx:mx6 update fuse_bank0_regs
      pmic:pfuze add macro for setting voltage
      pmic:pfuz100 add switch mode and more registers

Stefan Roese (1):
      arm: mx6: Add Barco platinum-picon and platinum-titanium

Stefano Babic (1):
      mx6: fix warning in platinum board

Ye.Li (4):
      imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
      imx: mx6qsabreauto: Change to use common GPMI IO clock function
      imx: imximage: Add QuadSPI boot support
      imx: mx6: Fixed AIPS3 base address issue

 arch/arm/Kconfig                              |  13 ++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |   6 ++
 arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c   |  13 +++-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c     |  18 ++++++
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   | 110
++++++++++++++++++++++++++++++++--
 arch/arm/cpu/armv7/mx6/ddr.c                  |  96
+++++++++++++++++++++++++-----
 arch/arm/cpu/armv7/mx6/soc.c                  |   2 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h      |  16 +++--
 arch/arm/include/asm/arch-mx6/mx6-ddr.h       |  46 ++++++++++++++
 arch/arm/include/asm/arch-mxs/sys_proto.h     |  17 ++++++
 board/aristainetos/aristainetos.c             |   8 +--
 board/bachmann/ot1200/Makefile                |   4 ++
 board/bachmann/ot1200/mx6q_4x_mt41j128.cfg    |  14 -----
 board/bachmann/ot1200/ot1200.c                |  34 +++++++++--
 board/bachmann/ot1200/ot1200_spl.c            | 162
++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/Kconfig                  |  37 ++++++++++++
 board/barco/platinum/MAINTAINERS              |   7 +++
 board/barco/platinum/Makefile                 |  14 +++++
 board/barco/platinum/platinum.c               | 217
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/platinum.h               |  89
++++++++++++++++++++++++++++
 board/barco/platinum/platinum_picon.c         | 244
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/platinum_titanium.c      | 209
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/spl_picon.c              | 182
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/barco/platinum/spl_titanium.c           | 185
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/compulab/cm_fx6/cm_fx6.c                |  95
++++++++++++++++++++++++++---
 board/compulab/cm_t335/cm_t335.c              |   2 +-
 board/compulab/cm_t35/cm_t35.c                |  14 ++++-
 board/compulab/cm_t3517/cm_t3517.c            |   2 +-
 board/compulab/cm_t54/cm_t54.c                |   2 +-
 board/compulab/common/Makefile                |   1 -
 board/compulab/common/common.h                |   9 ---
 board/compulab/common/eeprom.c                |  20 ++++---
 board/compulab/common/eeprom.h                |   4 +-
 board/compulab/common/splash.c                |  72 ----------------------
 board/freescale/mx53loco/imximage.cfg         |   3 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  25 +-------
 board/freescale/mx6sxsabresd/MAINTAINERS      |   1 +
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   | 171
++++++++++++++++++++++++++++++++++++++++++++++++++--
 common/Makefile                               |   1 +
 common/splash_source.c                        | 176
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/mx6sxsabresd_spl_defconfig            |   4 ++
 configs/ot1200_spl_defconfig                  |   4 ++
 configs/platinum_picon_defconfig              |   4 ++
 configs/platinum_titanium_defconfig           |   4 ++
 doc/README.splashprepare                      |  13 ++++
 include/configs/aristainetos.h                | 167
++++++++++++++++++++++++++++-----------------------
 include/configs/cm_fx6.h                      | 158
++++++++++++++++++++++++++++---------------------
 include/configs/cm_t35.h                      |   1 +
 include/configs/imx6_spl.h                    |   8 +++
 include/configs/mx6slevk.h                    |   2 +-
 include/configs/mx6sxsabresd.h                |   9 ++-
 include/configs/ot1200.h                      |  11 +++-
 include/configs/platinum.h                    | 319
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/platinum_picon.h              |  31 ++++++++++
 include/configs/platinum_titanium.h           |  38 ++++++++++++
 include/configs/wandboard.h                   |   2 +-
 include/power/pfuze100_pmic.h                 |  55 +++++++++++++++++
 include/splash.h                              |  11 ++++
 tools/imximage.c                              |   2 +
 tools/imximage.h                              |   2 +
 tools/logos/compulab.bmp                      | Bin 0 -> 31810 bytes
 tools/mxsboot.c                               |   6 ++
 62 files changed, 2863 insertions(+), 329 deletions(-)
 create mode 100644 board/bachmann/ot1200/ot1200_spl.c
 create mode 100644 board/barco/platinum/Kconfig
 create mode 100644 board/barco/platinum/MAINTAINERS
 create mode 100644 board/barco/platinum/Makefile
 create mode 100644 board/barco/platinum/platinum.c
 create mode 100644 board/barco/platinum/platinum.h
 create mode 100644 board/barco/platinum/platinum_picon.c
 create mode 100644 board/barco/platinum/platinum_titanium.c
 create mode 100644 board/barco/platinum/spl_picon.c
 create mode 100644 board/barco/platinum/spl_titanium.c
 delete mode 100644 board/compulab/common/splash.c
 create mode 100644 common/splash_source.c
 create mode 100644 configs/mx6sxsabresd_spl_defconfig
 create mode 100644 configs/ot1200_spl_defconfig
 create mode 100644 configs/platinum_picon_defconfig
 create mode 100644 configs/platinum_titanium_defconfig
 create mode 100644 include/configs/platinum.h
 create mode 100644 include/configs/platinum_picon.h
 create mode 100644 include/configs/platinum_titanium.h
 create mode 100644 tools/logos/compulab.bmp


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================